dispatcher(k): regenerated readme file

modules_k/dispatcher/README

@@ -56,12 +56,13 @@ Carsten Bock
               3.19. ds_ping_from (string)
               3.20. ds_ping_interval (int)
               3.21. ds_probing_threshhold (int)
-              3.22. ds_probing_mode (int)
-              3.23. ds_append_branch (int)
-              3.24. ds_hash_size (int)
-              3.25. ds_hash_expire (int)
-              3.26. ds_hash_initexpire (int)
-              3.27. ds_hash_check_interval (int)
+              3.22. ds_ping_reply_codes (string)
+              3.23. ds_probing_mode (int)
+              3.24. ds_append_branch (int)
+              3.25. ds_hash_size (int)
+              3.26. ds_hash_expire (int)
+              3.27. ds_hash_initexpire (int)
+              3.28. ds_hash_check_interval (int)
 
         4. Exported Functions
 
@@ -113,16 +114,17 @@ Carsten Bock
    1.20. Set the “ds_ping_from” parameter
    1.21. Set the “ds_ping_interval” parameter
    1.22. Set the “ds_probing_threshhold” parameter
-   1.23. Set the “ds_probing_mode” parameter
-   1.24. Set the “ds_append_branch” parameter
-   1.25. Set the “ds_hash_size” parameter
-   1.26. Set the “ds_hash_expire” parameter
-   1.27. Set the “ds_hash_initexpire” parameter
-   1.28. Set the “ds_hash_check_interval” parameter
-   1.29. ds_select_dst usage
-   1.30. ds_load_unset usage
-   1.31. dispatcher list file
-   1.32. Kamailio config script - sample dispatcher usage
+   1.23. Set the “ds_ping_reply_codes” parameter
+   1.24. Set the “ds_probing_mode” parameter
+   1.25. Set the “ds_append_branch” parameter
+   1.26. Set the “ds_hash_size” parameter
+   1.27. Set the “ds_hash_expire” parameter
+   1.28. Set the “ds_hash_initexpire” parameter
+   1.29. Set the “ds_hash_check_interval” parameter
+   1.30. ds_select_dst usage
+   1.31. ds_load_unset usage
+   1.32. dispatcher list file
+   1.33. Kamailio config script - sample dispatcher usage
 
 Chapter 1. Admin Guide
 
@@ -157,12 +159,13 @@ Chapter 1. Admin Guide
         3.19. ds_ping_from (string)
         3.20. ds_ping_interval (int)
         3.21. ds_probing_threshhold (int)
-        3.22. ds_probing_mode (int)
-        3.23. ds_append_branch (int)
-        3.24. ds_hash_size (int)
-        3.25. ds_hash_expire (int)
-        3.26. ds_hash_initexpire (int)
-        3.27. ds_hash_check_interval (int)
+        3.22. ds_ping_reply_codes (string)
+        3.23. ds_probing_mode (int)
+        3.24. ds_append_branch (int)
+        3.25. ds_hash_size (int)
+        3.26. ds_hash_expire (int)
+        3.27. ds_hash_initexpire (int)
+        3.28. ds_hash_check_interval (int)
 
    4. Exported Functions
 
@@ -236,12 +239,13 @@ Chapter 1. Admin Guide
    3.19. ds_ping_from (string)
    3.20. ds_ping_interval (int)
    3.21. ds_probing_threshhold (int)
-   3.22. ds_probing_mode (int)
-   3.23. ds_append_branch (int)
-   3.24. ds_hash_size (int)
-   3.25. ds_hash_expire (int)
-   3.26. ds_hash_initexpire (int)
-   3.27. ds_hash_check_interval (int)
+   3.22. ds_ping_reply_codes (string)
+   3.23. ds_probing_mode (int)
+   3.24. ds_append_branch (int)
+   3.25. ds_hash_size (int)
+   3.26. ds_hash_expire (int)
+   3.27. ds_hash_initexpire (int)
+   3.28. ds_hash_check_interval (int)
 
 3.1. list_file (string)
 
@@ -531,7 +535,8 @@ Note
 
    If you want to set a gateway into probing mode, you will need a
    specific number of requests until it will change from "active" to
-   probing. The number of attempts can be set with this parameter.
+   probing. The number of attempts can be set with this parameter. This
+   parameter can be modified via ser config framework.
 
    Default value is “3”.
 
@@ -540,7 +545,25 @@ Note
  modparam("dispatcher", "ds_probing_threshhold", 10)
  ...
 
-3.22. ds_probing_mode (int)
+3.22. ds_ping_reply_codes (string)
+
+   This parameter defines the valid response codes, which are accepted as
+   a valid reply to the PING-Method. It is a list separated by colons,
+   whery you may define either a single code (e.g. "code=202" would accept
+   202 as an additional, valid response) or a class of responses, you want
+   to accept (e.g. "class=2" would accept everything from 200 to 299 as
+   valid response). This parameter can be modified via ser config
+   framework.
+
+   Default value is “” (only 200 OK is accepted).
+
+   Example 1.23. Set the “ds_ping_reply_codes” parameter
+ ...
+ modparam("dispatcher", "ds_ping_reply_codes", "class=2;code=403;code=488;class=
+3")
+ ...
+
+3.23. ds_probing_mode (int)
 
    Controls what gateways are tested to see if they are reachable. If set
    to 0, only the gateways with state PROBING are tested, if set to 1, all
@@ -549,12 +572,12 @@ Note
 
    Default value is “0”.
 
-   Example 1.23. Set the “ds_probing_mode” parameter
+   Example 1.24. Set the “ds_probing_mode” parameter
  ...
  modparam("dispatcher", "ds_probing_mode", 1)
  ...
 
-3.23. ds_append_branch (int)
+3.24. ds_append_branch (int)
 
    If set to 1, functions will automaticall append a new branch if called
    in FAILURE_ROUTE. If set to 0, script writer has to call
@@ -562,12 +585,12 @@ Note
 
    Default value is “1”.
 
-   Example 1.24. Set the “ds_append_branch” parameter
+   Example 1.25. Set the “ds_append_branch” parameter
  ...
  modparam("dispatcher", "ds_append_branch", 0)
  ...
 
-3.24. ds_hash_size (int)
+3.25. ds_hash_size (int)
 
    The value to be used as power of two to set the number of slots to hash
    table storing data for call load dispatching (e.g., value 8 will create
@@ -576,24 +599,24 @@ Note
 
    Default value is “0”.
 
-   Example 1.25. Set the “ds_hash_size” parameter
+   Example 1.26. Set the “ds_hash_size” parameter
  ...
  modparam("dispatcher", "ds_hash_size", 9)
  ...
 
-3.25. ds_hash_expire (int)
+3.26. ds_hash_expire (int)
 
    Expiration time in seconds to remove the load on a destination if no
    BYE was received meanwhile.
 
    Default value is “7200”.
 
-   Example 1.26. Set the “ds_hash_expire” parameter
+   Example 1.27. Set the “ds_hash_expire” parameter
  ...
  modparam("dispatcher", "ds_hash_expire", 3600)
  ...
 
-3.26. ds_hash_initexpire (int)
+3.27. ds_hash_initexpire (int)
 
    Expiration time in seconds to remove the load on a destination if no
    200 for INVITE was received meanwhile and state updated with
@@ -601,19 +624,19 @@ Note
 
    Default value is “7200”.
 
-   Example 1.27. Set the “ds_hash_initexpire” parameter
+   Example 1.28. Set the “ds_hash_initexpire” parameter
  ...
  modparam("dispatcher", "ds_hash_initexpire", 60)
  ...
 
-3.27. ds_hash_check_interval (int)
+3.28. ds_hash_check_interval (int)
 
    Time interval in seconds to scan internal hash table with call load
    dispatching data for expired items.
 
    Default value is “30”.
 
-   Example 1.28. Set the “ds_hash_check_interval” parameter
+   Example 1.29. Set the “ds_hash_check_interval” parameter
  ...
  modparam("dispatcher", "ds_hash_check_interval", 60)
  ...
@@ -680,7 +703,7 @@ Note
 
    This function can be used from REQUEST_ROUTE.
 
-   Example 1.29. ds_select_dst usage
+   Example 1.30. ds_select_dst usage
 ...
 ds_select_dst("1", "0");
 ...
@@ -776,7 +799,7 @@ ds_select_dst("1", "$var(a)");
    This function can be used from REQUEST_ROUTE, FAILURE_ROUTE,
    BRANCH_ROUTE and ONREPLY_ROUTE.
 
-   Example 1.30. ds_load_unset usage
+   Example 1.31. ds_load_unset usage
 ...
 route {
     ...
@@ -884,14 +907,15 @@ setid(int) destination(sip uri) flags(int,opt) priority(int,opt) attrs(str,opt)
    For database, each element of a line resides in a different column.
    Next is a dispatcher.list file example:
 
-   Example 1.31. dispatcher list file
+   Example 1.32. dispatcher list file
 ...
 # $Id$
 # dispatcher destination sets
 #
 
 # line format
-# setit(integer) destination(sip uri) flags (integer, optional)
+# setit(int) destination(sip uri) flags(int,opt) priority(int,opt) attributes(st
+r,opt)
 
 # proxies
 2 sip:127.0.0.1:5080
@@ -908,7 +932,7 @@ setid(int) destination(sip uri) flags(int,opt) priority(int,opt) attrs(str,opt)
 
    Next picture displays a sample usage of dispatcher.
 
-   Example 1.32. Kamailio config script - sample dispatcher usage
+   Example 1.33. Kamailio config script - sample dispatcher usage
 ...
 # $Id$
 # sample config file for dispatcher module