modules: readme files regenerated - dispatcher ... [skip ci]

src/modules/dispatcher/README

@@ -1489,9 +1489,12 @@ if(ds_list_exists("10")) {
        ignoring the protocol (value 2). If parameter is 0, all ip, port
        and proto are matched and active status is ignored. If bit one is
        set, then port is ignored. If bit two is set, then protocol is
-       ignored. If bit three is set, then state must be active. The
-       parameter can be an integer or a variable holding an integer value.
-       It must be provided if the uri parameter is provided.
+       ignored. If bit three is set, then state must be active. If bit
+       four is set, then socket/sockname be matched. If bit five is set,
+       then try to find the most complete "address/protocol/port/local
+       socket" combination for all dispatcher targets. The parameter can
+       be an integer or a variable holding an integer value. It must be
+       provided if the uri parameter is provided.
      * uri (optional) - if parameter is empty or missing, the matching is
        done against source IP, port and protocol. Otherwise the value has
        to be a valid SIP URI, used to match against addresses in the

src/modules/microhttpd/README

@@ -86,7 +86,7 @@ Chapter 1. Admin Guide
 
    The following libraries or applications must be installed before
    running Kamailio with this module loaded:
-     * libmicrohhtpd - libmicrohttpd library
+     * libmicrohttpd - libmicrohttpd library
 
 3. Parameters
 
@@ -163,6 +163,10 @@ event_route[microhttpd:request] {
 5.1.  microhttpd:request
 
    The event route is executed when a new HTTP request is received.
+
+   Inside it, the $mhttpd(...) group of variables is available, giving
+   access to several attributes of the HTTP request, such as method, URL,
+   data (body) or headers.
 ...
 ...
 loadmodule "microhttpd.so

src/modules/presence/README

@@ -1 +1,1606 @@
+Presence Module
 
+Anca-Maria Vamanu
+
+   Voice Sistem SRL
+
+Juha Heinanen
+
+   TutPro Inc.
+
+Edited by
+
+Anca-Maria Vamanu
+
+Juha Heinanen
+
+   Copyright © 2006 Voice Sistem SRL
+
+   Copyright © 2009 Juha Heinanen
+     __________________________________________________________________
+
+   Table of Contents
+
+   1. Admin Guide
+
+        1. Overview
+        2. Dependencies
+
+              2.1. Kamailio Modules
+              2.2. External Libraries or Applications
+
+        3. Parameters
+
+              3.1. db_url(str)
+              3.2. presentity_table(str)
+              3.3. active_watchers_table(str)
+              3.4. watchers_table(str)
+              3.5. clean_period (int)
+              3.6. cseq_offset (int)
+              3.7. db_update_period (int)
+              3.8. waitn_time (int)
+              3.9. notifier_poll_rate (int)
+              3.10. notifier_processes (int)
+              3.11. force_delete (int)
+              3.12. startup_mode (int)
+              3.13. expires_offset (int)
+              3.14. max_expires (int)
+              3.15. min_expires (int)
+              3.16. min_expires_action (int)
+              3.17. server_address (str)
+              3.18. subs_db_mode (int)
+              3.19. publ_cache (int)
+              3.20. subs_htable_size (int)
+              3.21. pres_htable_size (int)
+              3.22. send_fast_notify (int)
+              3.23. enable_sphere_check (int)
+              3.24. timeout_rm_subs (int)
+              3.25. fetch_rows (integer)
+              3.26. db_table_lock_type (integer)
+              3.27. local_log_level (int)
+              3.28. local_log_facility (int)
+              3.29. subs_remove_match (int)
+              3.30. xavp_cfg (str)
+              3.31. retrieve_order (int)
+              3.32. retrieve_order_by (str)
+              3.33. sip_uri_match (int)
+              3.34. enable_dmq (integer)
+              3.35. pres_subs_mode (integer)
+              3.36. delete_same_subs (integer)
+              3.37. timer_mode (integer)
+              3.38. subs_respond_200 (integer)
+
+        4. Functions
+
+              4.1. handle_publish([sender_uri])
+              4.2. handle_subscribe([watcher_uri])
+              4.3. pres_auth_status(watcher_uri, presentity_uri)
+              4.4. pres_has_subscribers(presentity_uri, event)
+              4.5. pres_refresh_watchers(uri, event, type[, file_uri,
+                      filename])
+
+              4.6. pres_update_watchers(uri, event)
+
+        5. RPC Commands
+
+              5.1. presence.cleanup
+              5.2. presence.publish_cache_sync
+              5.3. presence.refreshWatchers
+              5.4. presence.updateWatchers
+              5.5. presence.presentity_list
+              5.6. presence.presentity_show
+              5.7. presence.watcher_list
+
+        6. Exported Variables
+
+              6.1. $subs(attr)
+              6.2. $notify_reply(attr)
+
+        7. Events
+
+              7.1. presence:notify-reply
+
+        8. Installation
+
+   2. Developer Guide
+
+        1. bind_presence(presence_api_t* api)
+        2. add_event
+        3. get_rules_doc
+        4. get_auth_status
+        5. apply_auth_nbody
+        6. agg_nbody
+        7. free_body
+        8. aux_body_processing
+        9. aux_free_body
+        10. evs_publ_handl
+        11. evs_subs_handl
+        12. contains_event
+        13. get_event_list
+        14. update_watchers_status
+        15. get_sphere
+        16. get_presentity
+        17. free_presentity
+
+   List of Examples
+
+   1.1. Set db_url parameter
+   1.2. Set presentity_table parameter
+   1.3. Set active_watchers_table parameter
+   1.4. Set watchers_table parameter
+   1.5. Set clean_period parameter
+   1.6. Set cseq_offset parameter
+   1.7. Set db_update_period parameter
+   1.8. Set waitn_time parameter
+   1.9. Set notifier_poll_rate parameter
+   1.10. Set notifier_processes parameter
+   1.11. Set force_delete parameter
+   1.12. Set startup_mode parameter
+   1.13. Set expires_offset parameter
+   1.14. Set max_expires parameter
+   1.15. Set min_expires parameter
+   1.16. Set min_expires parameter
+   1.17. Set server_address parameter
+   1.18. Set subs_db_mode parameter
+   1.19. Set publ_cache parameter
+   1.20. Set subs_htable_size parameter
+   1.21. Set pres_htable_size parameter
+   1.22. Set send_fast_notify parameter
+   1.23. Set enable_sphere_check parameter
+   1.24. Set timeout_rm_subs parameter
+   1.25. Set fetch_rows parameter
+   1.26. Set db_table_lock_type parameter
+   1.27. Set local_log_level parameter
+   1.28. Set local_log_facility parameter
+   1.29. Set subs_remove_match parameter
+   1.30. Set xavp_cfg parameter
+   1.31. Set retrieve_order parameter
+   1.32. Set retrieve_order_by parameter
+   1.33. Set sip_uri_match parameter
+   1.34. Set enable_dmq parameter
+   1.35. Set pres_subs_mode parameter
+   1.36. Set delete_same_subs parameter
+   1.37. Set timer_mode parameter
+   1.38. Set subs_respond_200 parameter
+   1.39. handle_publish usage
+   1.40. handle_subscribe usage
+   1.41. pres_auth_status usage
+   1.42. pres_has_subscribers usage
+   1.43. pres_refresh_watchers usage
+   1.44. pres_update_watchers usage
+   1.45. $subs(name) usage
+   1.46. $notify_reply(name) usage
+   1.47. $notify_reply(name) usage
+   2.1. presence_api_t structure
+
+Chapter 1. Admin Guide
+
+   Table of Contents
+
+   1. Overview
+   2. Dependencies
+
+        2.1. Kamailio Modules
+        2.2. External Libraries or Applications
+
+   3. Parameters
+
+        3.1. db_url(str)
+        3.2. presentity_table(str)
+        3.3. active_watchers_table(str)
+        3.4. watchers_table(str)
+        3.5. clean_period (int)
+        3.6. cseq_offset (int)
+        3.7. db_update_period (int)
+        3.8. waitn_time (int)
+        3.9. notifier_poll_rate (int)
+        3.10. notifier_processes (int)
+        3.11. force_delete (int)
+        3.12. startup_mode (int)
+        3.13. expires_offset (int)
+        3.14. max_expires (int)
+        3.15. min_expires (int)
+        3.16. min_expires_action (int)
+        3.17. server_address (str)
+        3.18. subs_db_mode (int)
+        3.19. publ_cache (int)
+        3.20. subs_htable_size (int)
+        3.21. pres_htable_size (int)
+        3.22. send_fast_notify (int)
+        3.23. enable_sphere_check (int)
+        3.24. timeout_rm_subs (int)
+        3.25. fetch_rows (integer)
+        3.26. db_table_lock_type (integer)
+        3.27. local_log_level (int)
+        3.28. local_log_facility (int)
+        3.29. subs_remove_match (int)
+        3.30. xavp_cfg (str)
+        3.31. retrieve_order (int)
+        3.32. retrieve_order_by (str)
+        3.33. sip_uri_match (int)
+        3.34. enable_dmq (integer)
+        3.35. pres_subs_mode (integer)
+        3.36. delete_same_subs (integer)
+        3.37. timer_mode (integer)
+        3.38. subs_respond_200 (integer)
+
+   4. Functions
+
+        4.1. handle_publish([sender_uri])
+        4.2. handle_subscribe([watcher_uri])
+        4.3. pres_auth_status(watcher_uri, presentity_uri)
+        4.4. pres_has_subscribers(presentity_uri, event)
+        4.5. pres_refresh_watchers(uri, event, type[, file_uri, filename])
+
+        4.6. pres_update_watchers(uri, event)
+
+   5. RPC Commands
+
+        5.1. presence.cleanup
+        5.2. presence.publish_cache_sync
+        5.3. presence.refreshWatchers
+        5.4. presence.updateWatchers
+        5.5. presence.presentity_list
+        5.6. presence.presentity_show
+        5.7. presence.watcher_list
+
+   6. Exported Variables
+
+        6.1. $subs(attr)
+        6.2. $notify_reply(attr)
+
+   7. Events
+
+        7.1. presence:notify-reply
+
+   8. Installation
+
+1. Overview
+
+   The Presence module implements the core functionality of SIP event
+   notification. It handles PUBLISH and SUBSCRIBE messages and generates
+   NOTIFY messages in a general, event independent way. It is extensible
+   and allows registering events to it from other Kamailio modules.
+   Supported SIP event packages are presence, presence.winfo, dialog;sla
+   from the presence_xml module and message-summary from the presence_mwi
+   module.
+
+   The module can use database and memory storage (to improve
+   performance). For subscriptions it supports the 4 storage modes: Memory
+   Only, Write Back, Write Through and DB Only. For publishes, it stores
+   the state documents in database only (because of the large size) and it
+   can store a publish cache in memory to avoid unnecessary database
+   queries. Read the subs_db_mode and publ_cache parameter sections to
+   decide which is the best storage configuration for you.
+
+   The module implements several API functions, that can be used by other
+   modules. In fact, it can be used only as a resource module, or
+   "library". This mode of operation is enabled if the db_url parameter is
+   not set to any value.
+
+   The Kamailio Presence module implements the specifications in: RFC3265,
+   RFC3856, RFC3857, RFC3858.
+
+2. Dependencies
+
+   2.1. Kamailio Modules
+   2.2. External Libraries or Applications
+
+2.1. Kamailio Modules
+
+   The following modules must be loaded before this module:
+     * a database module.
+     * sl.
+     * tm.
+     * dmq (only if replication is enabled).
+
+2.2. External Libraries or Applications
+
+     * libxml.
+
+3. Parameters
+
+   3.1. db_url(str)
+   3.2. presentity_table(str)
+   3.3. active_watchers_table(str)
+   3.4. watchers_table(str)
+   3.5. clean_period (int)
+   3.6. cseq_offset (int)
+   3.7. db_update_period (int)
+   3.8. waitn_time (int)
+   3.9. notifier_poll_rate (int)
+   3.10. notifier_processes (int)
+   3.11. force_delete (int)
+   3.12. startup_mode (int)
+   3.13. expires_offset (int)
+   3.14. max_expires (int)
+   3.15. min_expires (int)
+   3.16. min_expires_action (int)
+   3.17. server_address (str)
+   3.18. subs_db_mode (int)
+   3.19. publ_cache (int)
+   3.20. subs_htable_size (int)
+   3.21. pres_htable_size (int)
+   3.22. send_fast_notify (int)
+   3.23. enable_sphere_check (int)
+   3.24. timeout_rm_subs (int)
+   3.25. fetch_rows (integer)
+   3.26. db_table_lock_type (integer)
+   3.27. local_log_level (int)
+   3.28. local_log_facility (int)
+   3.29. subs_remove_match (int)
+   3.30. xavp_cfg (str)
+   3.31. retrieve_order (int)
+   3.32. retrieve_order_by (str)
+   3.33. sip_uri_match (int)
+   3.34. enable_dmq (integer)
+   3.35. pres_subs_mode (integer)
+   3.36. delete_same_subs (integer)
+   3.37. timer_mode (integer)
+   3.38. subs_respond_200 (integer)
+
+3.1. db_url(str)
+
+   The database url.
+
+   If set, the module is a fully operational presence server. Otherwise,
+   it is used as a 'library', for its exported functions.
+
+   Default value is “NULL”.
+
+   Example 1.1. Set db_url parameter
+...
+modparam("presence", "db_url",
+        "mysql://kamailio:kamailiorw@localhost/kamailio")
+...
+
+3.2. presentity_table(str)
+
+   The name of the db table where PUBLISH presence information is stored.
+
+   Default value is “presentity”.
+
+   Example 1.2. Set presentity_table parameter
+...
+modparam("presence", "presentity_table", "presentity")
+...
+
+3.3. active_watchers_table(str)
+
+   The name of the db table where active subscription information is
+   stored.
+
+   Default value is “active_watchers”.
+
+   Example 1.3. Set active_watchers_table parameter
+...
+modparam("presence", "active_watchers_table", "active_watchers")
+...
+
+3.4. watchers_table(str)
+
+   The name of the db table where subscription states are stored.
+
+   Default value is “watchers”.
+
+   Example 1.4. Set watchers_table parameter
+...
+modparam("presence", "watchers_table", "watchers")
+...
+
+3.5. clean_period (int)
+
+   The period in seconds between checks if there are expired messages
+   stored in the database.
+
+   Default value is “100”. A zero or negative value disables this
+   activity.
+
+   Example 1.5. Set clean_period parameter
+...
+modparam("presence", "clean_period", 100)
+...
+
+3.6. cseq_offset (int)
+
+   The allowed offset between server and client cseq.
+
+   Default value is “0”.
+
+   Example 1.6. Set cseq_offset parameter
+...
+modparam("presence", "cseq_offset", 1)
+...
+
+3.7. db_update_period (int)
+
+   The period at which to synchronize cached subscriber info with the
+   database.
+
+   Default value is “100”. A zero or negative value disables
+   synchronization.
+
+   Example 1.7. Set db_update_period parameter
+...
+modparam("presence", "db_update_period", 100)
+...
+
+3.8. waitn_time (int)
+
+   The maximum time period that NOTIFY requests will be buffered for. The
+   server will attempt to send NOTIFY requests within many seconds of a
+   change occurring.
+
+   Note: this parameter is only used when notifier_processes is greater
+   than 0. When notifier_processes is less than or equal to 0 NOTIFY
+   requests are sent immediately.
+
+   Default value is “5”.
+
+   Example 1.8. Set waitn_time parameter
+...
+modparam("presence", "waitn_time", 10)
+...
+
+3.9. notifier_poll_rate (int)
+
+   The number of times per second that the notifier processes should check
+   for work. Approximately 1/(waitn_time * notifier_poll_rate *
+   notifier_processes) of the pending updates will be sent each time a
+   notifier process runs.
+
+   Separate notifier processes are only run when subs_db_mode is 3 (DB
+   only mode).
+
+   Default value is “10”.
+
+   Example 1.9. Set notifier_poll_rate parameter
+...
+modparam("presence", "notifier_poll_rate", 20)
+...
+
+3.10. notifier_processes (int)
+
+   The number of notifier processes that should be started.
+
+   Separate notifier processes are only run when subs_db_mode is 3 (DB
+   only mode).
+
+   Note: setting this parameter to 0 when subs_db_mode is 3 keeps the old
+   behaviour (sending NOTIFY requests immediately). This (old) behaviour
+   is disabled by default in DB only mode because under load, when lots of
+   NOTIFY requests can be sent on a dialog at the same time, there are
+   race conditions which result in CSeq re-use.
+
+   Default value is “1”.
+
+   Example 1.10. Set notifier_processes parameter
+...
+modparam("presence", "notifier_processes", 2)
+...
+
+3.11. force_delete (int)
+
+   Enabling this parameter will delete expired presentity records without
+   updating watchers.
+
+   Set this parameter to “1” to enable.
+
+   Default value is “0”.
+
+   Example 1.11. Set force_delete parameter
+...
+modparam("presence", "force_delete", 1)
+...
+
+3.12. startup_mode (int)
+
+   Setting this parameter to 0 will provide startup related backward
+   compatibility for some modules. Setting to 0 fixes presentity requests
+   with low expires (e.g. time() + 1)
+
+   Set this parameter to “0” to enable backward compatibility.
+
+   Default value is “1”.
+
+   Example 1.12. Set startup_mode parameter
+...
+modparam("presence", "startup_mode", 0)
+...
+
+3.13. expires_offset (int)
+
+   The value in seconds that should be subtracted from the expires value
+   when sending a 200OK for a publish. It is used for forcing the client
+   to send an update before the old publish expires.
+
+   Default value is “0”.
+
+   Example 1.13. Set expires_offset parameter
+...
+modparam("presence", "expires_offset", 10)
+...
+
+3.14. max_expires (int)
+
+   The maximum admissible expires value for PUBLISH/SUBSCRIBE message (in
+   seconds).
+
+   Default value is “3600”.
+
+   Example 1.14. Set max_expires parameter
+...
+modparam("presence", "max_expires", 3600)
+...
+
+3.15. min_expires (int)
+
+   The minimum admissible expires value for PUBLISH/SUBSCRIBE message (in
+   seconds).
+
+   If > 0 then min_expires_action parameter determines the response.
+
+   Default value is “0”.
+
+   Example 1.15. Set min_expires parameter
+...
+modparam("presence", "min_expires", 1800)
+...
+
+3.16. min_expires_action (int)
+
+   The action to take when UA sends an expires value less than
+   min_expires.
+
+   Possible Values
+     * 1 : RFC Compliant, returns “423 Interval Too Brief”
+     * 2 : forces the min_expires value in the subscription
+
+   If > 0 then min_expires_action parameter determines the response.
+
+   Default value is “1”.
+
+   Example 1.16. Set min_expires parameter
+            ...
+            modparam("presence", "min_expires", 1800)
+            ...
+
+3.17. server_address (str)
+
+   The presence server address which will become the value of Contact
+   header filed for 200 OK replies to SUBSCRIBE and PUBLISH and in NOTIFY
+   messages.
+
+   Example 1.17. Set server_address parameter
+...
+modparam("presence", "server_address", "sip:10.10.10.10:5060")
+...
+
+3.18. subs_db_mode (int)
+
+   The presence module can utilize database for persistent subscription
+   storage. If you use database, your subscriptions will survive machine
+   restarts or SW crashes. The disadvantage is that accessing the database
+   can be time consuming. Therefore, presence module implements four
+   database accessing modes:
+     * 0 - This disables database completely. Only memory will be used.
+       Subscriptions will not survive restart. Use this value if you need
+       a really fast presence module and subscription persistence is not
+       necessary or is provided by other means.
+     * 1 - Write-Through scheme. Subscriptions are updated synchronously
+       in database and in memory(used for read operations). Use this
+       scheme if speed is not top priority, but it's important that no
+       subscriptions will be lost during crash or reboot or if you have an
+       external application that reads the state of the subscriptions from
+       database and they need to be updated synchronously.
+     * 2 - Write-Back scheme. This is a combination of previous two
+       schemes. All changes are made to memory and database
+       synchronization is done in the timer. The timer deletes all expired
+       contacts and flushes all modified or new subscriptions to database.
+       Use this scheme if you encounter high-load peaks and want them to
+       process as fast as possible. Latency of this mode is much lower
+       than latency of mode 1, but slightly higher than latency of mode 0.
+       To control the interval at which data is flushed to database, set
+       the db_update_period parameter.
+     * 3 - DB-Only scheme. No memory cache is kept, all operations being
+       directly performed with the database. The timer deletes all expired
+       subscriptions from database. The mode is useful if you configure
+       more servers sharing the same DB without any replication at SIP
+       level. The mode may be slower due the high number of DB operation.
+
+   Default value is 2 (Write-Back scheme).
+
+   Example 1.18. Set subs_db_mode parameter
+...
+modparam("presence", "subs_db_mode", 1)
+...
+
+3.19. publ_cache (int)
+
+   To improve performance, the presence module can operate in a couple of
+   modes related to how PUBLISH data is stored. If publ_cache is 0, then
+   no information is stored in memory.
+
+   If publ_cache is 1, then the module keeps in memory an index of the
+   records stored in database, In this mode it keeps only the list of URIs
+   and events, so it does not use much memory. The cache is used when a
+   Subscription is received to check if there is any published state in
+   database. This way unnecessary queries in presentity table are avoided.
+
+   If publ_cache is 2, then the module keeps everything related to PUBLISH
+   requests in memory, not storing anything in the database.
+
+   Setting this parameter to 0 will disable the usage of the publish
+   cache. This is desirable when you have more servers sharing the same
+   database or there are other external entities inserting data into the
+   presentity table.
+
+   Default value is “1”.
+
+   Example 1.19. Set publ_cache parameter
+...
+modparam("presence", "publ_cache", 0)
+...
+
+3.20. subs_htable_size (int)
+
+   The size of the in-memory hash table to store subscription dialogs.
+   This parameter will be used as the power of 2 when computing table
+   size.
+
+   Default value is “9 (512)”.
+
+   Example 1.20. Set subs_htable_size parameter
+...
+modparam("presence", "subs_htable_size", 11)
+...
+
+3.21. pres_htable_size (int)
+
+   The size of the in-memory hash table to store publish records. This
+   parameter will be used as the power of 2 when computing table size.
+
+   Default value is “9 (512)”.
+
+   Example 1.21. Set pres_htable_size parameter
+...
+modparam("presence", "pres_htable_size", 11)
+...
+
+3.22. send_fast_notify (int)
+
+   This parameter enables or disables the sending of an initial empty
+   NOTIFY after a SUBSCRIBE/reSUBSCRIBE. This caused problems for MWI
+   application, because some CPEs (like Samsung) fail to understand an
+   empty NOTIFY to a message-summary event. This parameter is enabled by
+   default, thus adhering to the standard.
+
+   Default value is “1 ”.
+
+   Example 1.22. Set send_fast_notify parameter
+...
+modparam("presence", "send_fast_notify", 0)
+...
+
+3.23. enable_sphere_check (int)
+
+   This parameter is a flag that should be set if permission rules include
+   sphere checking. The sphere information is expected to be present in
+   the RPID body published by the presentity. The flag is introduced as
+   this check requires extra processing that should be avoided if this
+   feature is not supported by the clients.
+
+   Default value is “0 ”.
+
+   Example 1.23. Set enable_sphere_check parameter
+...
+modparam("presence", "enable_sphere_check", 1)
+...
+
+3.24. timeout_rm_subs (int)
+
+   This parameter is a flag that should be set if subscriptions should be
+   removed from the active_watchers when a NOTIFY times out. RFC3265
+   section 3.2.2 defines this behaviour as a SHOULD, so by default it is
+   on. Disabling this will keep subscriptions active on unreliable
+   networks.
+
+   Default value is “1”.
+
+   Example 1.24. Set timeout_rm_subs parameter
+...
+modparam("presence", "timeout_rm_subs", 0)
+...
+
+3.25. fetch_rows (integer)
+
+   Number of rows to be loaded in one step from database.
+
+   Default value is 500.
+
+   Example 1.25. Set fetch_rows parameter
+...
+modparam("presence", "fetch_rows", 1000)
+...
+
+3.26. db_table_lock_type (integer)
+
+   Enable (=1) or disable (=0) the Locks for table during a transaction.
+   Locking only the "current" table causes problems with a MySQL-Databases
+   in "DB-Only" mode.
+
+   In order to use the Presence-Module in "DB_ONLY"-mode with a
+   MySQL-Backend, set this parameter to "0", otherwise the
+   MySQL-Operations will fail. The Presence-Module will generate a "500
+   Server error" due to the failed MySQL-queries.
+
+   Default value is 1 (Write Lock for the Tables).
+
+   Example 1.26. Set db_table_lock_type parameter
+...
+modparam("presence", "db_table_lock_type", 0)
+...
+
+3.27. local_log_level (int)
+
+   Control log level for some debug messages inside the module.
+
+   Default value is 2 (L_INFO).
+
+   Example 1.27. Set local_log_level parameter
+...
+modparam("presence", "local_log_level", 3)
+...
+
+3.28. local_log_facility (int)
+
+   Control syslog facility for some debug messages inside the module.
+
+   Default value is taken from the core log_facility configuration
+   parameter.
+
+   Example 1.28. Set local_log_facility parameter
+...
+modparam("presence", "local_log_facility", "LOG_LOCAL3")
+...
+
+3.29. subs_remove_match (int)
+
+   Control how to match the subscriptions to remove from memory. If set to
+   0, then the match is done on To-Tag (local generated), if set to 1,
+   then the match is done on all dialog attributes (Call-Id, From-Tag,
+   To-Tag).
+
+   Default value is 0.
+
+   Example 1.29. Set subs_remove_match parameter
+...
+modparam("presence", "subs_remove_match", 1)
+...
+
+3.30. xavp_cfg (str)
+
+   The name of the xavp to be used to specify attributes for internal
+   processing of presence module.
+
+   Inner attributes inside xavp can be:
+     * priority - integer value to set the priority of the presence
+       document (higher value, higher priority). It can set the order of
+       the aggregated presence documents sent by NOTIFY (first the
+       document with higher priority). If xavp_cfg parameter is set but
+       this attribute is not in the avp, the priority of the presence
+       document is based on timestamp, so newer documents have higher
+       priority.
+     * delete_subscription - integer value to give extra control of
+       deleting the subscription after processing of
+       event_route[presence:notify-reply]. If value = 1, it deletes the
+       subscription. If xavp_cfg parameter is set but this attribute is
+       not in the avp, the subscription is not deleted. This does not
+       apply for codes 404, 481 and 408 (when timeout_rm_subs = 1) where
+       subscription is deleted.
+
+   Default value is empty (not set).
+
+   Example 1.30. Set xavp_cfg parameter
+...
+modparam("presence", "xavp_cfg", "pres")
+...
+if(is_method("PUBLISH")) {
+    $xavp(pres=>priority) = 100;
+}
+...
+
+3.31. retrieve_order (int)
+
+   If set to 0, presentity records are retrieved by received_time order.
+   If set to 1, presentity records are retrieved by the value of
+   retrieve_order_by parameter.
+
+   Default value is 0.
+
+   Example 1.31. Set retrieve_order parameter
+...
+modparam("presence", "retrieve_order", 1)
+...
+
+3.32. retrieve_order_by (str)
+
+   Used to set the order-by of the db query for fetching the presence
+   records when retrieve_order is set to 1.
+
+   Default value is “priority”.
+
+   Example 1.32. Set retrieve_order_by parameter
+...
+modparam("presence", "retrieve_order_by", "priority, received_time")
+...
+
+3.33. sip_uri_match (int)
+
+   The mode used when comparing uris.
+
+   Possible Values
+     * 0 : case sensitive
+     * 1 : case insensitive
+
+   Default value is “0”.
+
+   Example 1.33. Set sip_uri_match parameter
+...
+modparam("presence", "sip_uri_match", 1)
+...
+
+3.34. enable_dmq (integer)
+
+   If set to 1, will enable DMQ replication of presentities between nodes.
+   Use this instead of a shared DB to share state across a cluster and
+   update local watchers in realtime (subs_db_mode < 3) or on next
+   notifier run (subs_db_mode = 3).
+
+   If this parameter is enabled, the DMQ module must be loaded first -
+   otherwise, startup will fail.
+
+   Default value is 0.
+
+   Example 1.34. Set enable_dmq parameter
+...
+modparam("presence", "enable_dmq", 1)
+...
+
+3.35. pres_subs_mode (integer)
+
+   Allow disabling cloning subscription structure for pv $subs(...),
+   saving the pkg memory and copy operations for all its fields. If 1 the
+   cloning is done; if 0, no cloning and $subs(...) returns $null.
+
+   Default value is 1.
+
+   Example 1.35. Set pres_subs_mode parameter
+...
+modparam("presence", "pres_subs_mode", 0)
+...
+
+3.36. delete_same_subs (integer)
+
+   Enable deleting of subscriptions with the same presence uri and callid.
+
+   Default value is 0 (disabled behavior).
+
+   Example 1.36. Set delete_same_subs parameter
+...
+modparam("presence", "delete_same_subs", 1)
+...
+
+3.37. timer_mode (integer)
+
+   Specify what timer process to be used. If set to 0, the core main timer
+   is used. If set to 1, the core secondary timer is used.
+
+   Default value is 1.
+
+   Example 1.37. Set timer_mode parameter
+...
+modparam("presence", "timer_mode", 0)
+...
+
+3.38. subs_respond_200 (integer)
+
+   Specify the response code for accepted SUBSCRIBE requests. If set to 0,
+   "202 Accepted" will be returned (default behaviour till version 5.5).
+   If set to 1, "200 OK" will be returned instead, in conformance to
+   RFC6665, which prohibits 202 responses.
+
+   Default value is 1.
+
+   Example 1.38. Set subs_respond_200 parameter
+...
+modparam("presence", "subs_respond_200", 0)
+...
+
+4. Functions
+
+   4.1. handle_publish([sender_uri])
+   4.2. handle_subscribe([watcher_uri])
+   4.3. pres_auth_status(watcher_uri, presentity_uri)
+   4.4. pres_has_subscribers(presentity_uri, event)
+   4.5. pres_refresh_watchers(uri, event, type[, file_uri, filename])
+   4.6. pres_update_watchers(uri, event)
+
+4.1.  handle_publish([sender_uri])
+
+   Handles PUBLISH requests by storing and updating published information
+   in memory cache and database, then calls functions to send NOTIFY
+   messages when changes in the published information occur. It takes one
+   argument -> sender_uri. The parameter was added for enabling BLA
+   implementation. If present, notification of a change in published state
+   is not sent to the respective uri even though a subscription exists. It
+   should be taken from the Sender header. It was left at the decision of
+   the administrator whether or not to transmit the content of this header
+   as parameter for handle_publish, to prevent security problems.
+
+   This function can be used from REQUEST_ROUTE.
+
+   Return code:
+     * 1 - if success.
+     * -1 - if error.
+
+   The module sends an appropriate stateless reply in all cases.
+
+   Example 1.39. handle_publish usage
+...
+        if(is_method("PUBLISH"))
+        {
+                if($hdr(Sender)!= NULL)
+                        handle_publish("$hdr(Sender)");
+                else
+                        handle_publish();
+                t_release();
+        }
+...
+
+4.2.  handle_subscribe([watcher_uri])
+
+   The function which handles SUBSCRIBE requests. It stores or updates
+   information in memory and database and calls functions to send NOTIFY
+   messages when a SUBSCRIBE which initiate a dialog is received.
+
+   By default this function uses the From: URI from the SUBSCRIBE request
+   as the Watcher URI. The optional watcher_uri parameter can be used to
+   specify a different Watcher URI, possibly taken from a SIP header like
+   P-Asserted-Identity:.
+
+   This function can be used from REQUEST_ROUTE.
+
+   Return code:
+     * 1 - if success.
+     * -1 - if error.
+
+   The module sends an appropriate stateless reply in all cases.
+
+   Example 1.40. handle_subscribe usage
+...
+if(method=="SUBSCRIBE")
+    handle_subscribe();
+...
+
+4.3.  pres_auth_status(watcher_uri, presentity_uri)
+
+   The function checks if watcher URI is authorized to subscribe event
+   'presence' of presentity URI. Both watcher_uri and presentity_uri can
+   be static strings or contain pseudo variables.
+
+   The function returns ACTIVE_STATUS, if subscription is allowed, and
+   PENDING_STATUS, TERMINATED_STATUS, or WAITING_STATUS otherwise. See
+   presence/subscribe.h for the corresponding integer codes. In case of
+   error, function returns -1.
+
+   This function can be used from REQUEST_ROUTE.
+
+   Example 1.41. pres_auth_status usage
+...
+if (method=="MESSAGE") {
+    pres_auth_status("$fu", $ru");
+    if ($retcode == 1) {
+        t_relay();
+    } else {
+        send_reply("403", "Forbidden");
+    }
+}
+...
+
+4.4.  pres_has_subscribers(presentity_uri, event)
+
+   Allows to check if presentity has any subscribers of event.
+
+   This function can be used from ANY_ROUTE.
+
+   Example 1.42. pres_has_subscribers usage
+...
+if(pres_has_subscribers($var(uri), "message-summary"))
+    # do something...;
+...
+
+4.5.  pres_refresh_watchers(uri, event, type[, file_uri, filename])
+
+   The function can be used in configuration to trigger notifies to
+   watchers if a change in watchers authorization or in published state
+   occurred (i.e., updates of xcap documents).
+
+   Parameters:
+     * uri - the uri of the user who made the change and whose watchers
+       should be informed.
+     * event - the event package.
+     * type - it distinguishes between the three different types of events
+       that can trigger the refresh, depending on its value:
+          + 0 - a change in watchers authentication.
+          + 1 - a statical update in published state through direct update
+            in db table.
+          + 2 - a statical update in published state by modifying the pidf
+            manipulation document.
+     * file_uri - the uri of the pidf-manipulation file on the XCAP server
+       (only used for type 2).
+     * filename - the name of the pidf-manipulation file on the XCAP
+       server (only used for type 2).
+
+   This function can be used from ANY_ROUTE.
+
+   Example 1.43. pres_refresh_watchers usage
+...
+pres_refresh_watchers("sip:[email protected]", "presence", 1);
+...
+
+4.6.  pres_update_watchers(uri, event)
+
+   The function can be used in configuration to trigger updates to
+   watchers status if a change in watchers authorization state occurred
+   (i.e., updates of xcap documents change state from pending to active).
+
+   Parameters:
+     * uri - the uri of the user who made the change and whose watchers
+       should be informed. Can be PV.
+     * event - the event package (e.g., presence).
+
+   This function can be used from ANY_ROUTE.
+
+   Example 1.44. pres_update_watchers usage
+...
+pres_update_watchers("sip:[email protected]", "presence");
+...
+
+5. RPC Commands
+
+   5.1. presence.cleanup
+   5.2. presence.publish_cache_sync
+   5.3. presence.refreshWatchers
+   5.4. presence.updateWatchers
+   5.5. presence.presentity_list
+   5.6. presence.presentity_show
+   5.7. presence.watcher_list
+
+5.1. presence.cleanup
+
+   Manually triggers the cleanup functions for the active_watchers,
+   presentity, and watchers tables. Useful if you have set clean_period
+   and/or db_update_period to zero or less.
+
+   Name: presence.cleanup
+
+   Parameters: none
+
+   RPC Command Format:
+...
+kamcmd presence.cleanup
+...
+
+5.2. presence.publish_cache_sync
+
+   Synchronize changes made to the presentity table with the publish
+   cache.
+
+   Name: presence.publish_cache_sync
+
+   Parameters: none
+
+   RPC Command Format:
+...
+kamcmd presence.publish_cache_sync
+...
+
+5.3. presence.refreshWatchers
+
+   Triggers sending Notify messages to watchers if a change in watchers
+   authorization or in published state occurred.
+
+   Name: presence.refreshWatchers
+
+   Parameters:
+     * uri - the uri of the user who made the change and whose watchers
+       should be informed
+     * event - the event package.
+     * type - it distinguishes between the three different types of events
+       that can trigger the refresh, depending on its value:
+          + 0 - a change in watchers authentication.
+          + 1 - a statical update in published state through direct update
+            in db table.
+          + 2 - a statical update in published state by modifying the pidf
+            manipulation document.
+     * file_uri - the uri of the pidf-manipulation file on the XCAP server
+       (only used for type 2).
+     * filename - the name of the pidf-manipulation file on the XCAP
+       server (only used for type 2).
+
+   RPC Command Format:
+...
+kamcmd presence.refreshWatchers sip:[email protected] presence 1
+...
+
+5.4. presence.updateWatchers
+
+   Manually triggers updates to watchers (for example, after the contents
+   of XCAP docs has been updated).
+
+   Name: presence.updateWatchers
+
+   Parameters:
+     * uri - the uri of the user who made the changes and whose watchers
+       should be updated.
+     * event - the event package (e.g. presence).
+
+   RPC Command Format:
+...
+kamcmd presence.updateWatchers sip:[email protected] presence
+...
+
+5.5. presence.presentity_list
+
+   List the presentity records stored in memory.
+
+   Name: presence.presentity_list
+
+   Parameters:
+     * mode - (optional) it can be 'full' to print all the fields of
+       presentity record. If missing, only a selected set of fields are
+       printed in the response.
+
+   RPC Command Format:
+...
+kamctl rpc presence.presentity_list
+kamctl rpc presence.presentity_list full
+...
+
+5.6. presence.presentity_show
+
+   Return the presentity records stored in memory by filtering with
+   username and/or domain.
+
+   Name: presence.presentity_show
+
+   Parameters:
+     * mode - it can be 'basic' or 'full' to print a selection or all the
+       fields of presentity record.
+     * user - username to match presentity records, use '*' to match any
+       username.
+     * domain - the value to match the domain of the presentity records,
+       use '*' to match any domain.
+
+   RPC Command Format:
+...
+kamctl rpc presence.presentity_show basic alice sipserver.com
+kamctl rpc presence.presentity_show full * sipserver.com
+...
+
+5.7. presence.watcher_list
+
+   Return the watcher records for a specific presentity uri.
+
+   Name: presence.watcher_list
+
+   Parameters:
+     * mode - it can be 'basic' or 'full' to print a selection or all the
+       fields of watcher record.
+     * uri - the presentity uri.
+
+   RPC Command Format:
+...
+kamctl rpc presence.watcher_list basic sip:[email protected]
+...
+
+6. Exported Variables
+
+   6.1. $subs(attr)
+   6.2. $notify_reply(attr)
+
+6.1. $subs(attr)
+
+   Access the attributes of handled subscription. It must be used after a
+   successful call of “handle_subscription()” or in the following events.
+     * tm:local-request - before notify is sent
+     * presence:notify-reply - after notify is sent
+
+   The “attr” can be:
+     * uri - subscription presentity uri
+     * pres_uri - alias for presentity uri
+     * to_user
+     * to_domain
+     * from_user
+     * from_domain
+     * watcher_username
+     * watcher_domain
+     * event
+     * event_id
+     * to_tag
+     * from_tag
+     * callid
+     * remote_cseq
+     * local_cseq
+     * contact
+     * local_contact
+     * record_route
+     * expires
+     * status
+     * reason
+     * version
+     * flags
+     * user_agent
+
+   Example 1.45. $subs(name) usage
+...
+if(handle_subscription())
+{
+  xlog("presentity=$subs(uri)\n");
+}
+...
+
+6.2. $notify_reply(attr)
+
+   Access the reply message received when notifying subscriber. It must be
+   used in the following events.
+     * presence:notify-reply - after notify is sent
+
+   The “attr” can be any pseudo var that accesses attributes of msg
+
+   Example 1.46. $notify_reply(name) usage
+...
+event_route[presence:notify-reply]
+{
+  xlog("received message = $notify_reply($mb)\n");
+}
+...
+
+7. Events
+
+   7.1. presence:notify-reply
+
+7.1. presence:notify-reply
+
+   Fired after notify reply is received or timeout.
+
+   Example 1.47. $notify_reply(name) usage
+...
+event_route[presence:notify-reply]
+{
+  xlog("received message = $notify_reply($mb)\n");
+}
+...
+
+8. Installation
+
+   The module requires 3 tables in the Kamailio database: "presentity",
+   "active_watchers" and "watchers". The SQL syntax to create them can be
+   found in presence-create.sql script in the database directories in the
+   kamailio/scripts folder. You can also find the complete database
+   documentation on the project webpage,
+   https://www.kamailio.org/docs/db-tables/kamailio-db-devel.html.
+
+Chapter 2. Developer Guide
+
+   Table of Contents
+
+   1. bind_presence(presence_api_t* api)
+   2. add_event
+   3. get_rules_doc
+   4. get_auth_status
+   5. apply_auth_nbody
+   6. agg_nbody
+   7. free_body
+   8. aux_body_processing
+   9. aux_free_body
+   10. evs_publ_handl
+   11. evs_subs_handl
+   12. contains_event
+   13. get_event_list
+   14. update_watchers_status
+   15. get_sphere
+   16. get_presentity
+   17. free_presentity
+
+   The module provides the following functions that can be used in other
+   Kamailio modules.
+
+1.  bind_presence(presence_api_t* api)
+
+   This function binds the presence modules and fills the structure with
+   one exported function -> add_event, which when called adds a new event
+   to be handled by presence.
+
+   Example 2.1. presence_api_t structure
+...
+typedef struct presence_api {
+        add_event_t add_event;
+        contains_event_t contains_event;
+        search_event_t search_event;
+        get_event_list_t get_event_list;
+
+        update_watchers_t update_watchers_status;
+
+        /* subs hash table handling functions */
+        new_shtable_t new_shtable;
+        destroy_shtable_t destroy_shtable;
+        insert_shtable_t insert_shtable;
+        search_shtable_t search_shtable;
+        delete_shtable_t delete_shtable;
+        update_shtable_t update_shtable;
+        /* function to duplicate a subs structure*/
+        mem_copy_subs_t  mem_copy_subs;
+        /* function used for update in database*/
+        update_db_subs_t update_db_subs_timer;
+        /* function to extract dialog information from a
+        SUBSCRIBE message */
+        extract_sdialog_info_t extract_sdialog_info;
+        /* function to request sphere definition for a presentity */
+        pres_get_sphere_t get_sphere;
+
+}presence_api_t;
+...
+
+2.  add_event
+
+   Field type:
+...
+typedef int (*add_event_t)(pres_ev_t* event);
+...
+
+   This function receives as a parameter a structure with event specific
+   information and adds it to presence event list.
+
+   The structure received as a parameter:
+...
+typedef struct pres_ev
+{
+        str name;
+        event_t* evp;
+        str content_type;
+        int default_expires;
+        int type;
+        int etag_not_new;
+        /*
+         *  0 - the standard mechanism (allocating new etag
+                        for each Publish)
+         *  1 - allocating an etag only
+                        for an initial Publish
+        */
+        int req_auth;
+        get_rules_doc_t* get_rules_doc;
+        apply_auth_t*  apply_auth_nbody;
+        is_allowed_t*  get_auth_status;
+
+        /* an agg_body_t function should be registered
+         * if the event permits having multiple published
+         * states and requires an aggregation of the information
+         * otherwise, this field should be NULL and the last
+         * published state is taken when constructing Notify msg
+         */
+        agg_nbody_t* agg_nbody;
+        publ_handling_t  * evs_publ_handl;
+        subs_handling_t  * evs_subs_handl;
+        free_body_t* free_body;
+    /* sometimes it is necessary that a module make changes for a body for each
+     * active watcher (e.g. setting the "version" parameter in an XML document.
+     * If a module registers the aux_body_processing callback, it gets called fo
+r
+     * each watcher. It either gets the body received by the PUBLISH, or the bod
+y
+     * generated by the agg_nbody function.
+     * The module can decide if it makes a copy of the original body, which is t
+hen
+     * manipulated, or if it works directly in the original body. If the module
+makes a
+     * copy of the original body, it also has to register the aux_free_body() to
+     * free this "per watcher" body.
+     */
+    aux_body_processing_t* aux_body_processing;
+    free_body_t* aux_free_body;
+        struct pres_ev* wipeer;
+        struct pres_ev* next;
+
+}pres_ev_t;
+...
+
+3.  get_rules_doc
+
+   Filed type:
+...
+typedef int (get_rules_doc_t)(str* user, str* domain, str** rules_doc);
+...
+
+   This function returns the authorization rules document that will be
+   used in obtaining the status of the subscription and processing the
+   notified body. A reference to the document should be put in the
+   auth_rules_doc of the subs_t structure given as a parameter to the
+   functions described below.
+
+4.  get_auth_status
+
+   This filed is a function to be called for a subscription request to
+   return the state for that subscription according to authorization
+   rules. In the auth_rules_doc field of the subs_t structure received as
+   a parameter should contain the rules document of the presentity in
+   case, if it exists.
+
+   It is called only if the req_auth field is not 0.
+
+   Filed type:
+...
+typedef int (is_allowed_t)(struct subscription* subs);
+...
+
+5.  apply_auth_nbody
+
+   This parameter should be a function to be called for an event that
+   requires authorization, when constructing final body. The authorization
+   document is taken from the auth_rules_doc field of the subs_t structure
+   given as a parameter. It is called only if the req_auth field is not 0.
+
+   Filed type:
+...
+typedef int (apply_auth_t)(str* , struct subscription*, str** );
+...
+
+6.  agg_nbody
+
+   If present, this field marks that the events requires aggregation of
+   states. This function receives a body array and should return the final
+   body. If not present, it is considered that the event does not require
+   aggregation and the most recent published information is used when
+   constructing Notifies.
+
+   Filed type:
+...
+typedef str* (agg_nbody_t)(str* pres_user, str* pres_domain,
+str** body_array, int n, int off_index);
+..
+
+7.  free_body
+
+   This field must be field in if subsequent processing is performed on
+   the info from database before being inserted in Notify message body(if
+   agg_nbody or apply_auth_nbody fields are filled in). It should match
+   the allocation function used when processing the body.
+
+   Filed type:
+...
+typedef void(free_body_t)(char* body);
+..
+
+8.  aux_body_processing
+
+   This field must be set if the module needs to manipulate the NOTIFY
+   body for each watcher. E.g. if the XML body includes a 'version'
+   parameter which will be increased for each NOTIFY, on a "per watcher"
+   basis. The module can either allocate a new buffer for the new body and
+   return it (aux_free_body function must be set too) or it manipulates
+   the original body directly and returns NULL.
+
+   Filed type:
+...
+typedef str* (aux_body_processing_t)(struct subscription *subs, str* body);
+..
+
+9.  aux_free_body
+
+   This field must be set if the module registers the aux_body_processing
+   function and allocates memory for the new modified body. Then, this
+   function will be used to free the pointer returned by the
+   aux_body_processing function. If the module does use the
+   aux_body_processing, but does not allocate new memory, but manipulates
+   directly the original body buffer, then the aux_body_processing must
+   return NULL and this field should not be set.
+
+   Filed type:
+...
+typedef void(free_body_t)(char* body);
+..
+
+10.  evs_publ_handl
+
+   This function is called when handling Publish requests. Most contain
+   body correctness check.
+
+...
+typedef int (publ_handling_t)(struct sip_msg*);
+..
+
+11.  evs_subs_handl
+
+   It is not compulsory. Should contain event specific handling for
+   Subscription requests.
+
+   Filed type:
+...
+typedef int (subs_handling_t)(struct sip_msg*);
+..
+
+12.  contains_event
+
+   Field type:
+..
+typedef pres_ev_t* (*contains_event_t)(str* name,
+event_t* parsed_event);
+...
+
+   The function parses the event name received as a parameter and searches
+   the result in the list. It returns the found event or NULL, if not
+   found. If the second argument is an allocated event_t* structure it
+   fills it with the result of the parsing.
+
+13.  get_event_list
+
+   Field type:
+...
+typedef int (*get_event_list_t) (str** ev_list);
+...
+
+   This function returns a string representation of the events registered
+   in presence module (used for Allowed-Events header).
+
+14.  update_watchers_status
+
+   Field type:
+...
+typedef int (*update_watchers_t)(str pres_uri, pres_ev_t* ev,
+str* rules_doc);
+...
+
+   This function is an external command that can be used to announce a
+   change in authorization rules for a presentity. It updates the stored
+   status and sends a Notify to the watchers whose status has changes.
+   (used by presence_xml module when notified through an RPC command of a
+   change in an xcap document).
+
+15.  get_sphere
+
+   Field type:
+...
+typedef char* (*pres_get_sphere_t)(str* pres_uri);
+...
+
+   This function searches for a sphere definition in the published
+   information if this has type RPID. If not found returns NULL. (the
+   return value is allocated in private memory and should be freed)
+
+16.  get_presentity
+
+   Field type:
+...
+typedef str* (*pres_get_presentity_t)(str pres_uri, pres_ev_t *ev, str *etag, st
+r *contact);
+...
+
+   This function returns a pointer to a str containing an XML document
+   with all of the matching presentities. If no matching presentities are
+   found the function returns NULL.
+
+   The etag and contact parameters are optional and may be set to NULL.
+   Once you are finished with the presentity document you must call
+   free_presentity to free the allocated memory.
+
+17.  free_presentity
+
+   Field type:
+...
+typedef void (*pres_free_presentity_t)(str *presentity, pres_ev_t *ev);
+...
+
+   This function frees memory allocated by a call to get_presentity. The
+   ev parameter MUST point to the same pres_ev_t data-structure that was
+   used in the call to get_presentity.

src/modules/tls/README

@@ -263,8 +263,9 @@ Chapter 1. Admin Guide
    profiles of tls.cfg file.
 
    When installing tls module of kamailio, a sample 'tls.cfg' file is
-   deployed in the same folder with 'kamailio.cfg', along with freshly
-   generated self signed certificates.
+   deployed in the same folder with 'kamailio.cfg'. For freshly generated
+   self signed certificates make must be called from tls folder
+make install-tls-cert
 
    HINT: be sure you have enable_tls=yes to your kamailio.cfg.
 
@@ -402,9 +403,6 @@ make -C modules/tls extra_defs="-DTLS_WR_DEBUG -DTLS_RD_DEBUG"
    standard conforming (the verification should happen during TLS
    connection establishment and not after).
 
-   TLS specific config reloading is not safe, so for now better don't use
-   it, especially under heavy traffic.
-
    This documentation is incomplete. The provided selects are not
    documented in this file. A list with all the ones implemented by the
    TLS module can be found in the Cookbook
@@ -1683,6 +1681,10 @@ verify_client = optional_no_ca
    are not terminated and they continue to use the old certificates. The
    new configuration will be used for new connections.
 
+   Reload is generally safe and usable in production environments. If
+   possible should be done in a time where the service has lower
+   usage/connections.
+
    This RPC command is exported with "RPC_EXEC_DELTA" flag, therefore its
    execution rate can be restricted to specific time intervals by setting
    the "rpc_exec_delta" core parameter.