doc: cfg_list regenerated

doc/cfg_list/cfg_core.txt

@@ -37,87 +37,107 @@ Configuration Variables for core
         Default: 250.
         Type: integer.
 
- 7. core.dns_try_ipv6
+ 7. core.dst_blacklist_udp_imask
+        blacklist event ignore mask for UDP.
+        Default: 0.
+        Type: integer.
+
+ 8. core.dst_blacklist_tcp_imask
+        blacklist event ignore mask for TCP.
+        Default: 0.
+        Type: integer.
+
+ 9. core.dst_blacklist_tls_imask
+        blacklist event ignore mask for TLS.
+        Default: 0.
+        Type: integer.
+
+10. core.dst_blacklist_sctp_imask
+        blacklist event ignore mask for SCTP.
+        Default: 0.
+        Type: integer.
+
+11. core.dns_try_ipv6
         enable/disable IPv6 DNS lookups.
         Default: 1.
         Range: 0 - 1.
         Type: integer.
 
- 8. core.dns_try_naptr
+12. core.dns_try_naptr
         enable/disable NAPTR DNS lookups.
         Default: 0.
         Range: 0 - 1.
         Type: integer.
 
- 9. core.dns_udp_pref
+13. core.dns_udp_pref
         udp protocol preference when doing NAPTR lookups.
         Default: 30.
         Type: integer.
 
-10. core.dns_tcp_pref
+14. core.dns_tcp_pref
         tcp protocol preference when doing NAPTR lookups.
         Default: 20.
         Type: integer.
 
-11. core.dns_tls_pref
+15. core.dns_tls_pref
         tls protocol preference when doing NAPTR lookups.
         Default: 10.
         Type: integer.
 
-12. core.dns_sctp_pref
+16. core.dns_sctp_pref
         sctp protocol preference when doing NAPTR lookups.
         Default: 20.
         Type: integer.
 
-13. core.dns_retr_time
+17. core.dns_retr_time
         time in s before retrying a dns request.
         Default: -1.
         Type: integer.
 
-14. core.dns_retr_no
+18. core.dns_retr_no
         number of dns retransmissions before giving up.
         Default: -1.
         Type: integer.
 
-15. core.dns_servers_no
+19. core.dns_servers_no
         how many dns servers from the ones defined in /etc/resolv.conf
         will be used.
         Default: -1.
         Type: integer.
 
-16. core.dns_use_search_list
+20. core.dns_use_search_list
         if set to 0, the search list in /etc/resolv.conf is ignored.
         Default: 1.
         Range: 0 - 1.
         Type: integer.
 
-17. core.dns_search_full_match
+21. core.dns_search_full_match
         enable/disable domain name checks against the search list in
         DNS answers.
         Default: 1.
         Range: 0 - 1.
         Type: integer.
 
-18. core.dns_reinit
+22. core.dns_reinit
         set to 1 in order to reinitialize the DNS resolver.
         Default: 0.
         Range: 1 - 1.
         Type: integer.
 
-19. core.use_dns_cache
+23. core.use_dns_cache
         enable/disable the dns cache.
         Default: 1.
         Range: 0 - 1.
         Type: integer.
 
-20. core.dns_cache_flags
+24. core.dns_cache_flags
         dns cache specific resolver flags (1=ipv4 only, 2=ipv6 only,
         4=prefer ipv6.
         Default: 0.
         Range: 0 - 4.
         Type: integer.
 
-21. core.use_dns_failover
+25. core.use_dns_failover
         enable/disable dns failover in case the destination resolves to
         multiple ip addresses and/or multiple SRV records (depends on
         use_dns_cache).
@@ -125,7 +145,7 @@ Configuration Variables for core
         Range: 0 - 1.
         Type: integer.
 
-22. core.dns_srv_lb
+26. core.dns_srv_lb
         enable/disable load balancing to different srv records of the
         same priority based on the srv records weights (depends on
         dns_failover).
@@ -133,74 +153,74 @@ Configuration Variables for core
         Range: 0 - 1.
         Type: integer.
 
-23. core.dns_cache_negative_ttl
+27. core.dns_cache_negative_ttl
         time to live for negative results ("not found") in seconds. Use
         0 to disable.
         Default: 60.
         Type: integer.
 
-24. core.dns_cache_min_ttl
+28. core.dns_cache_min_ttl
         minimum accepted time to live for a record, in seconds.
         Default: 0.
         Type: integer.
 
-25. core.dns_cache_max_ttl
+29. core.dns_cache_max_ttl
         maximum accepted time to live for a record, in seconds.
         Default: -1.
         Type: integer.
 
-26. core.dns_cache_mem
+30. core.dns_cache_mem
         maximum memory used for the dns cache in Kb.
         Default: 500.
         Type: integer.
 
-27. core.dns_cache_del_nonexp
+31. core.dns_cache_del_nonexp
         allow deletion of non-expired records from the cache when there
         is no more space left for new ones.
         Default: 0.
         Range: 0 - 1.
         Type: integer.
 
-28. core.mem_dump_pkg
+32. core.mem_dump_pkg
         dump process memory status, parameter: pid_number.
         Default: 0.
         Type: integer.
 
-29. core.mem_dump_shm
+33. core.mem_dump_shm
         dump shared memory status.
         Default: 0.
         Type: integer.
 
-30. core.max_while_loops
+34. core.max_while_loops
         maximum iterations allowed for a while loop.
         Default: 100.
         Type: integer.
 
-31. core.udp_mtu
+35. core.udp_mtu
         fallback to a congestion controlled protocol if send size
         exceeds udp_mtu.
         Default: 0.
         Range: 0 - 65535.
         Type: integer.
 
-32. core.udp_mtu_try_proto
+36. core.udp_mtu_try_proto
         if send size > udp_mtu use proto (1 udp, 2 tcp, 3 tls, 4 sctp).
         Default: 0.
         Range: 1 - 4.
         Type: integer.
 
-33. core.force_rport
+37. core.force_rport
         force rport for all the received messages.
         Default: 0.
         Range: 0 - 1.
         Type: integer.
 
-34. core.memlog
+38. core.memlog
         log level for memory status/summary information.
         Default: 3.
         Type: integer.
 
-35. core.mem_summary
+39. core.mem_summary
         memory debugging information displayed on exit (flags):  0 -
         off, 1 - dump all the used blocks (status), 2 - summary of used
         blocks.

doc/cfg_list/cfg_ratelimit.txt

@@ -0,0 +1,17 @@
+Configuration Variables for ratelimit
+=====================================
+
+                  [ this file is autogenerated, do not edit ]
+
+
+ 1. ratelimit.reply_code
+        The code of the reply sent by Kamailio while limiting..
+        Default: 503.
+        Range: 400 - 699.
+        Type: integer.
+
+ 2. ratelimit.reply_reason
+        The reason of the reply sent by Kamailio while limiting..
+        Default: Server Unavailable.
+        Type: string.
+

doc/cfg_list/cfg_registrar.txt

@@ -0,0 +1,58 @@
+Configuration Variables for registrar
+=====================================
+
+                  [ this file is autogenerated, do not edit ]
+
+
+ 1. registrar.default_expires
+        Contains number of second to expire if no expire hf or contact
+        expire present.
+        Default: 3600.
+        Type: integer.
+
+ 2. registrar.min_expires
+        The minimum expires value of a Contact. Value 0 disables the
+        checking. .
+        Default: 60.
+        Type: integer.
+
+ 3. registrar.max_expires
+        The maximum expires value of a Contact. Value 0 disables the
+        checking. .
+        Default: 0.
+        Type: integer.
+
+ 4. registrar.max_contacts
+        The maximum number of Contacts for an AOR. Value 0 disables the
+        checking. .
+        Default: 0.
+        Type: integer.
+
+ 5. registrar.retry_after
+        If you want to add the Retry-After header field in 5xx replies,
+        set this parameter to a value grater than zero.
+        Default: 0.
+        Type: integer.
+
+ 6. registrar.case_sensitive
+        If set to 1 then AOR comparison will be case sensitive.
+        Recommended and default is 0, case insensitive.
+        Default: 0.
+        Type: integer.
+
+ 7. registrar.default_q
+        The parameter represents default q value for new contacts..
+        Default: -1.
+        Range: -1 - 1000.
+        Type: integer.
+
+ 8. registrar.append_branches
+        If set to 1(default), lookup will put all contacts found in msg
+        structure.
+        Default: 1.
+        Type: integer.
+
+ 9. registrar.realm_pref
+        Realm prefix to be removed. Default is "".
+        Type: string.
+

doc/cfg_list/cfg_sctp.txt

@@ -73,11 +73,12 @@ Configuration Variables for sctp
 
 14. sctp.init_max_timeo
         max INIT retransmission timeout (RTO max for INIT), in msecs.
-        Range: 0 - 1024.
+        Range: 0 - 1073741824.
         Type: integer.
 
 15. sctp.hbinterval
         heartbeat interval in msecs.
+        Range: 0 - 1073741824.
         Type: integer.
 
 16. sctp.pathmaxrxt

doc/cfg_list/cfg_siputils.txt

@@ -0,0 +1,11 @@
+Configuration Variables for siputils
+====================================
+
+                  [ this file is autogenerated, do not edit ]
+
+
+ 1. siputils.ring_timeout
+        define how long the Call-id is kept in the internal list.
+        Default: 0.
+        Type: integer.
+

doc/cfg_list/cfg_tm.txt

@@ -28,77 +28,83 @@ Configuration Variables for tm
         Default: 120000.
         Type: integer.
 
- 5. tm.wt_timer
+ 5. tm.fr_inv_timer_next
+        The value [ms] of fr_inv_timer for subsequent branches during
+        serial forking..
+        Default: 30000.
+        Type: integer.
+
+ 6. tm.wt_timer
         time for which a transaction stays in memory to absorb delayed
         messages after it completed.
         Default: 5000.
         Type: integer.
 
- 6. tm.delete_timer
+ 7. tm.delete_timer
         time after which a to-be-deleted transaction currently ref-ed
         by a process will be tried to be deleted again..
         Default: 200.
         Type: integer.
 
- 7. tm.retr_timer1
+ 8. tm.retr_timer1
         initial retransmission period (in milliseconds).
         Default: 500.
         Type: integer.
 
- 8. tm.retr_timer2
+ 9. tm.retr_timer2
         maximum retransmission period (in milliseconds).
         Default: 4000.
         Type: integer.
 
- 9. tm.max_inv_lifetime
+10. tm.max_inv_lifetime
         maximum time an invite transaction can live from the moment of
         creation.
         Default: 180000.
         Type: integer.
 
-10. tm.max_noninv_lifetime
+11. tm.max_noninv_lifetime
         maximum time a non-invite transaction can live from the moment
         of creation.
         Default: 32000.
         Type: integer.
 
-11. tm.noisy_ctimer
+12. tm.noisy_ctimer
         if set, INVITE transactions that time-out (FR INV timer) will
         be always replied.
         Default: 1.
         Range: 0 - 1.
         Type: integer.
 
-12. tm.auto_inv_100
+13. tm.auto_inv_100
         automatically send 100 to an INVITE.
         Default: 1.
         Range: 0 - 1.
         Type: integer.
 
-13. tm.auto_inv_100_reason
+14. tm.auto_inv_100_reason
         reason text of the automatically send 100 to an INVITE.
         Default: trying -- your call is important to us.
         Type: string.
 
-14. tm.unix_tx_timeout
+15. tm.unix_tx_timeout
         Unix socket transmission timeout, in milliseconds.
         Default: 500.
         Type: integer.
 
-15. tm.restart_fr_on_each_reply
+16. tm.restart_fr_on_each_reply
         restart final response timer on each provisional reply.
         Default: 1.
         Range: 0 - 1.
         Type: integer.
 
-16. tm.pass_provisional_replies
+17. tm.pass_provisional_replies
         enable/disable passing of provisional replies to
         TMCB_LOCAL_RESPONSE_OUT callbacks.
         Default: 0.
         Range: 0 - 1.
         Type: integer.
 
-17. tm.aggregate_challenges
+18. tm.aggregate_challenges
         if the final response is a 401 or a 407, aggregate all the
         authorization headers (challenges) (rfc3261 requires this to be
         on).
@@ -106,27 +112,27 @@ Configuration Variables for tm
         Range: 0 - 1.
         Type: integer.
 
-18. tm.unmatched_cancel
+19. tm.unmatched_cancel
         determines how CANCELs with no matching transaction are handled
         (0: statefull forwarding, 1: stateless forwarding, 2: drop).
         Default: 0.
         Range: 0 - 2.
         Type: integer.
 
-19. tm.default_code
+20. tm.default_code
         default SIP response code sent by t_reply(), if the function
         cannot retrieve its parameters.
         Default: 500.
         Range: 400 - 699.
         Type: integer.
 
-20. tm.default_reason
+21. tm.default_reason
         default SIP reason phrase sent by t_reply(), if the function
         cannot retrieve its parameters.
         Default: Server Internal Error.
         Type: string.
 
-21. tm.reparse_invite
+22. tm.reparse_invite
         if set to 1, the CANCEL and negative ACK requests are
         constructed from the INVITE message which was sent out instead
         of building them from the received request.
@@ -134,55 +140,55 @@ Configuration Variables for tm
         Range: 0 - 1.
         Type: integer.
 
-22. tm.ac_extra_hdrs
+23. tm.ac_extra_hdrs
         header fields prefixed by this parameter value are included in
         the CANCEL and negative ACK messages if they were present in
         the outgoing INVITE (depends on reparse_invite).
         Default: <unknown:str>.
         Type: string.
 
-23. tm.blst_503
+24. tm.blst_503
         if set to 1, blacklist 503 SIP response sources.
         Default: 0.
         Range: 0 - 1.
         Type: integer.
 
-24. tm.blst_503_def_timeout
+25. tm.blst_503_def_timeout
         default 503 blacklist time (in s), when no Retry-After header
         is present.
         Default: 0.
         Type: integer.
 
-25. tm.blst_503_min_timeout
+26. tm.blst_503_min_timeout
         minimum 503 blacklist time (in s).
         Default: 0.
         Type: integer.
 
-26. tm.blst_503_max_timeout
+27. tm.blst_503_max_timeout
         maximum 503 blacklist time (in s).
         Default: 3600.
         Type: integer.
 
-27. tm.blst_methods_add
+28. tm.blst_methods_add
         bitmap of method types that trigger blacklisting on transaction
         timeouts.
         Default: 1.
         Type: integer.
 
-28. tm.blst_methods_lookup
+29. tm.blst_methods_lookup
         Bitmap of method types that are looked-up in the blacklist
         before statefull forwarding.
         Default: -9.
         Type: integer.
 
-29. tm.cancel_b_method
+30. tm.cancel_b_method
         How to cancel branches on which no replies were received: 0 -
         fake reply, 1 - retransmitting the request, 2 - send cancel.
         Default: 1.
         Range: 0 - 2.
         Type: integer.
 
-30. tm.reparse_on_dns_failover
+31. tm.reparse_on_dns_failover
         if set to 1, the SIP message after a DNS failover is
         constructed from the outgoing message buffer of the failed
         branch instead of from the received request.
@@ -190,15 +196,19 @@ Configuration Variables for tm
         Range: 0 - 1.
         Type: integer.
 
-31. tm.fr_inv_timer_next
-        The value of fr_inv_timer for subsequent branches during serial
-        forking.
-        Default: 30000.
-        Type: integer.
-
 32. tm.disable_6xx_block
         if set to 1, 6xx is treated like a normal reply (breaks rfc).
         Default: 0.
         Range: 0 - 1.
         Type: integer.
 
+33. tm.local_ack_mode
+        if set to 1 or 2, local 200 ACKs are sent to the same address
+        as the corresponding INVITE (1) or the source of the 200 reply
+        (2) instead of using the contact and the route set (it breaks
+        the rfc, if  it is not set to 0 but allows dealing with NATed
+        contacts in some simple cases).
+        Default: 0.
+        Range: 0 - 2.
+        Type: integer.
+

doc/cfg_list/docbook/cfg_core.xml

@@ -75,6 +75,50 @@
     </para>
 </section>
 
+<section id="core.dst_blacklist_udp_imask">
+    <title>core.dst_blacklist_udp_imask</title>
+    <para>
+        blacklist event ignore mask for UDP.
+    </para>
+    <para>Default value: 0.</para>
+    <para>Type: integer.</para>
+    <para>
+    </para>
+</section>
+
+<section id="core.dst_blacklist_tcp_imask">
+    <title>core.dst_blacklist_tcp_imask</title>
+    <para>
+        blacklist event ignore mask for TCP.
+    </para>
+    <para>Default value: 0.</para>
+    <para>Type: integer.</para>
+    <para>
+    </para>
+</section>
+
+<section id="core.dst_blacklist_tls_imask">
+    <title>core.dst_blacklist_tls_imask</title>
+    <para>
+        blacklist event ignore mask for TLS.
+    </para>
+    <para>Default value: 0.</para>
+    <para>Type: integer.</para>
+    <para>
+    </para>
+</section>
+
+<section id="core.dst_blacklist_sctp_imask">
+    <title>core.dst_blacklist_sctp_imask</title>
+    <para>
+        blacklist event ignore mask for SCTP.
+    </para>
+    <para>Default value: 0.</para>
+    <para>Type: integer.</para>
+    <para>
+    </para>
+</section>
+
 <section id="core.dns_try_ipv6">
     <title>core.dns_try_ipv6</title>
     <para>

doc/cfg_list/docbook/cfg_ratelimit.xml

@@ -0,0 +1,32 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!-- this file is autogenerated, do not edit! -->
+<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
+	"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">
+<chapter id="config_vars.ratelimit">
+	<title> Configuration Variables for ratelimit</title>
+
+
+<section id="ratelimit.reply_code">
+    <title>ratelimit.reply_code</title>
+    <para>
+        The code of the reply sent by Kamailio while limiting..
+    </para>
+    <para>Default value: 503.</para>
+    <para>Range: 400 - 699.</para>
+    <para>Type: integer.</para>
+    <para>
+    </para>
+</section>
+
+<section id="ratelimit.reply_reason">
+    <title>ratelimit.reply_reason</title>
+    <para>
+        The reason of the reply sent by Kamailio while limiting..
+    </para>
+    <para>Default value: Server Unavailable.</para>
+    <para>Type: string.</para>
+    <para>
+    </para>
+</section>
+
+</chapter>

doc/cfg_list/docbook/cfg_registrar.xml

@@ -0,0 +1,115 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!-- this file is autogenerated, do not edit! -->
+<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
+	"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">
+<chapter id="config_vars.registrar">
+	<title> Configuration Variables for registrar</title>
+
+
+<section id="registrar.default_expires">
+    <title>registrar.default_expires</title>
+    <para>
+        Contains number of second to expire if no expire hf or contact
+        expire present.
+    </para>
+    <para>Default value: 3600.</para>
+    <para>Type: integer.</para>
+    <para>
+    </para>
+</section>
+
+<section id="registrar.min_expires">
+    <title>registrar.min_expires</title>
+    <para>
+        The minimum expires value of a Contact. Value 0 disables the
+        checking. .
+    </para>
+    <para>Default value: 60.</para>
+    <para>Type: integer.</para>
+    <para>
+    </para>
+</section>
+
+<section id="registrar.max_expires">
+    <title>registrar.max_expires</title>
+    <para>
+        The maximum expires value of a Contact. Value 0 disables the
+        checking. .
+    </para>
+    <para>Default value: 0.</para>
+    <para>Type: integer.</para>
+    <para>
+    </para>
+</section>
+
+<section id="registrar.max_contacts">
+    <title>registrar.max_contacts</title>
+    <para>
+        The maximum number of Contacts for an AOR. Value 0 disables the
+        checking. .
+    </para>
+    <para>Default value: 0.</para>
+    <para>Type: integer.</para>
+    <para>
+    </para>
+</section>
+
+<section id="registrar.retry_after">
+    <title>registrar.retry_after</title>
+    <para>
+        If you want to add the Retry-After header field in 5xx replies,
+        set this parameter to a value grater than zero.
+    </para>
+    <para>Default value: 0.</para>
+    <para>Type: integer.</para>
+    <para>
+    </para>
+</section>
+
+<section id="registrar.case_sensitive">
+    <title>registrar.case_sensitive</title>
+    <para>
+        If set to 1 then AOR comparison will be case sensitive.
+        Recommended and default is 0, case insensitive.
+    </para>
+    <para>Default value: 0.</para>
+    <para>Type: integer.</para>
+    <para>
+    </para>
+</section>
+
+<section id="registrar.default_q">
+    <title>registrar.default_q</title>
+    <para>
+        The parameter represents default q value for new contacts..
+    </para>
+    <para>Default value: -1.</para>
+    <para>Range: -1 - 1000.</para>
+    <para>Type: integer.</para>
+    <para>
+    </para>
+</section>
+
+<section id="registrar.append_branches">
+    <title>registrar.append_branches</title>
+    <para>
+        If set to 1(default), lookup will put all contacts found in msg
+        structure.
+    </para>
+    <para>Default value: 1.</para>
+    <para>Type: integer.</para>
+    <para>
+    </para>
+</section>
+
+<section id="registrar.realm_pref">
+    <title>registrar.realm_pref</title>
+    <para>
+        Realm prefix to be removed. Default is &quot;&quot;.
+    </para>
+    <para>Type: string.</para>
+    <para>
+    </para>
+</section>
+
+</chapter>

doc/cfg_list/docbook/cfg_sctp.xml

@@ -158,7 +158,7 @@
     <para>
         max INIT retransmission timeout (RTO max for INIT), in msecs.
     </para>
-    <para>Range: 0 - 1024.</para>
+    <para>Range: 0 - 1073741824.</para>
     <para>Type: integer.</para>
     <para>
     </para>
@@ -169,6 +169,7 @@
     <para>
         heartbeat interval in msecs.
     </para>
+    <para>Range: 0 - 1073741824.</para>
     <para>Type: integer.</para>
     <para>
     </para>

doc/cfg_list/docbook/cfg_siputils.xml

@@ -0,0 +1,20 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!-- this file is autogenerated, do not edit! -->
+<!DOCTYPE section PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
+	"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">
+<chapter id="config_vars.siputils">
+	<title> Configuration Variables for siputils</title>
+
+
+<section id="siputils.ring_timeout">
+    <title>siputils.ring_timeout</title>
+    <para>
+        define how long the Call-id is kept in the internal list.
+    </para>
+    <para>Default value: 0.</para>
+    <para>Type: integer.</para>
+    <para>
+    </para>
+</section>
+
+</chapter>

doc/cfg_list/docbook/cfg_tm.xml

@@ -54,6 +54,18 @@
     </para>
 </section>
 
+<section id="tm.fr_inv_timer_next">
+    <title>tm.fr_inv_timer_next</title>
+    <para>
+        The value [ms] of fr_inv_timer for subsequent branches during
+        serial forking..
+    </para>
+    <para>Default value: 30000.</para>
+    <para>Type: integer.</para>
+    <para>
+    </para>
+</section>
+
 <section id="tm.wt_timer">
     <title>tm.wt_timer</title>
     <para>
@@ -372,25 +384,29 @@
     </para>
 </section>
 
-<section id="tm.fr_inv_timer_next">
-    <title>tm.fr_inv_timer_next</title>
+<section id="tm.disable_6xx_block">
+    <title>tm.disable_6xx_block</title>
     <para>
-        The value of fr_inv_timer for subsequent branches during serial
-        forking.
+        if set to 1, 6xx is treated like a normal reply (breaks rfc).
     </para>
-    <para>Default value: 30000.</para>
+    <para>Default value: 0.</para>
+    <para>Range: 0 - 1.</para>
     <para>Type: integer.</para>
     <para>
     </para>
 </section>
 
-<section id="tm.disable_6xx_block">
-    <title>tm.disable_6xx_block</title>
+<section id="tm.local_ack_mode">
+    <title>tm.local_ack_mode</title>
     <para>
-        if set to 1, 6xx is treated like a normal reply (breaks rfc).
+        if set to 1 or 2, local 200 ACKs are sent to the same address
+        as the corresponding INVITE (1) or the source of the 200 reply
+        (2) instead of using the contact and the route set (it breaks
+        the rfc, if  it is not set to 0 but allows dealing with NATed
+        contacts in some simple cases).
     </para>
     <para>Default value: 0.</para>
-    <para>Range: 0 - 1.</para>
+    <para>Range: 0 - 2.</para>
     <para>Type: integer.</para>
     <para>
     </para>

doc/cfg_list/docbook/cfg_var_list.xml

@@ -5,7 +5,7 @@
 <book id="cfg_var_list" xmlns:xi="http://www.w3.org/2001/XInclude">
 	<title>RPC Exports List</title>
 	<info><revhistory><revision>
-		<revnumber>sip-router git-8ee1a0</revnumber>
+		<revnumber>sip-router git-d2924b</revnumber>
 		<revremark>
 			Automatically generated by:
 			make -C doc/cfg_list all
@@ -16,4 +16,7 @@
 		<xi:include href="cfg_sctp.xml"/>
 		<xi:include href="cfg_maxfwd.xml"/>
 		<xi:include href="cfg_tm.xml"/>
+		<xi:include href="cfg_siputils.xml"/>
+		<xi:include href="cfg_registrar.xml"/>
+		<xi:include href="cfg_ratelimit.xml"/>
 </book>