Final Cleanup

-Removed LPNG
-Removed LJPEG
-Re-Added DefferredPNGWriter from rextimmy stb work

Commented out lines about file saving and reading in gfont, these are good for debugging font saves.

Engine/lib/CMakeLists.txt

@@ -165,7 +165,7 @@ if(APPLE)
     set(PNG_ARM_NEON off CACHE BOOL "" FORCE)
 endif()
 
-#PNG
+#PNG STB Update: Not sure if these are still needed.
 set(PNG_STATIC on CACHE BOOL "" FORCE)
 mark_as_advanced(PNG_STATIC)
 set(PNG_SHARED off CACHE BOOL "" FORCE)
@@ -185,10 +185,7 @@ endif()
 mark_as_advanced(PNG_DEBUG)
 mark_as_advanced(PNG_FRAMEWORK)
 mark_as_advanced(PNG_PREFIX)
-add_subdirectory(lpng ${TORQUE_LIB_TARG_DIRECTORY}/lpng EXCLUDE_FROM_ALL)
 
-
-add_subdirectory(ljpeg ${TORQUE_LIB_TARG_DIRECTORY}/ljpeg EXCLUDE_FROM_ALL)
 add_subdirectory(tinyxml ${TORQUE_LIB_TARG_DIRECTORY}/tinyxml EXCLUDE_FROM_ALL)
 add_subdirectory(opcode ${TORQUE_LIB_TARG_DIRECTORY}/opcode EXCLUDE_FROM_ALL)
 add_subdirectory(pcre ${TORQUE_LIB_TARG_DIRECTORY}/pcre EXCLUDE_FROM_ALL)

Engine/lib/ljpeg/CMakeLists.txt

@@ -1,2 +0,0 @@
-file(GLOB LJPEG_SOURCES "*.c")
-add_library(ljpeg STATIC ${LJPEG_SOURCES})

Engine/lib/ljpeg/extras/README

@@ -1,385 +0,0 @@
-The Independent JPEG Group's JPEG software
-==========================================
-
-README for release 6b of 27-Mar-1998
-====================================
-
-This distribution contains the sixth public release of the Independent JPEG
-Group's free JPEG software.  You are welcome to redistribute this software and
-to use it for any purpose, subject to the conditions under LEGAL ISSUES, below.
-
-Serious users of this software (particularly those incorporating it into
-larger programs) should contact IJG at [email protected] to be added to
-our electronic mailing list.  Mailing list members are notified of updates
-and have a chance to participate in technical discussions, etc.
-
-This software is the work of Tom Lane, Philip Gladstone, Jim Boucher,
-Lee Crocker, Julian Minguillon, Luis Ortiz, George Phillips, Davide Rossi,
-Guido Vollbeding, Ge' Weijers, and other members of the Independent JPEG
-Group.
-
-IJG is not affiliated with the official ISO JPEG standards committee.
-
-
-DOCUMENTATION ROADMAP
-=====================
-
-This file contains the following sections:
-
-OVERVIEW            General description of JPEG and the IJG software.
-LEGAL ISSUES        Copyright, lack of warranty, terms of distribution.
-REFERENCES          Where to learn more about JPEG.
-ARCHIVE LOCATIONS   Where to find newer versions of this software.
-RELATED SOFTWARE    Other stuff you should get.
-FILE FORMAT WARS    Software *not* to get.
-TO DO               Plans for future IJG releases.
-
-Other documentation files in the distribution are:
-
-User documentation:
-  install.doc       How to configure and install the IJG software.
-  usage.doc         Usage instructions for cjpeg, djpeg, jpegtran,
-                    rdjpgcom, and wrjpgcom.
-  *.1               Unix-style man pages for programs (same info as usage.doc).
-  wizard.doc        Advanced usage instructions for JPEG wizards only.
-  change.log        Version-to-version change highlights.
-Programmer and internal documentation:
-  libjpeg.doc       How to use the JPEG library in your own programs.
-  example.c         Sample code for calling the JPEG library.
-  structure.doc     Overview of the JPEG library's internal structure.
-  filelist.doc      Road map of IJG files.
-  coderules.doc     Coding style rules --- please read if you contribute code.
-
-Please read at least the files install.doc and usage.doc.  Useful information
-can also be found in the JPEG FAQ (Frequently Asked Questions) article.  See
-ARCHIVE LOCATIONS below to find out where to obtain the FAQ article.
-
-If you want to understand how the JPEG code works, we suggest reading one or
-more of the REFERENCES, then looking at the documentation files (in roughly
-the order listed) before diving into the code.
-
-
-OVERVIEW
-========
-
-This package contains C software to implement JPEG image compression and
-decompression.  JPEG (pronounced "jay-peg") is a standardized compression
-method for full-color and gray-scale images.  JPEG is intended for compressing
-"real-world" scenes; line drawings, cartoons and other non-realistic images
-are not its strong suit.  JPEG is lossy, meaning that the output image is not
-exactly identical to the input image.  Hence you must not use JPEG if you
-have to have identical output bits.  However, on typical photographic images,
-very good compression levels can be obtained with no visible change, and
-remarkably high compression levels are possible if you can tolerate a
-low-quality image.  For more details, see the references, or just experiment
-with various compression settings.
-
-This software implements JPEG baseline, extended-sequential, and progressive
-compression processes.  Provision is made for supporting all variants of these
-processes, although some uncommon parameter settings aren't implemented yet.
-For legal reasons, we are not distributing code for the arithmetic-coding
-variants of JPEG; see LEGAL ISSUES.  We have made no provision for supporting
-the hierarchical or lossless processes defined in the standard.
-
-We provide a set of library routines for reading and writing JPEG image files,
-plus two sample applications "cjpeg" and "djpeg", which use the library to
-perform conversion between JPEG and some other popular image file formats.
-The library is intended to be reused in other applications.
-
-In order to support file conversion and viewing software, we have included
-considerable functionality beyond the bare JPEG coding/decoding capability;
-for example, the color quantization modules are not strictly part of JPEG
-decoding, but they are essential for output to colormapped file formats or
-colormapped displays.  These extra functions can be compiled out of the
-library if not required for a particular application.  We have also included
-"jpegtran", a utility for lossless transcoding between different JPEG
-processes, and "rdjpgcom" and "wrjpgcom", two simple applications for
-inserting and extracting textual comments in JFIF files.
-
-The emphasis in designing this software has been on achieving portability and
-flexibility, while also making it fast enough to be useful.  In particular,
-the software is not intended to be read as a tutorial on JPEG.  (See the
-REFERENCES section for introductory material.)  Rather, it is intended to
-be reliable, portable, industrial-strength code.  We do not claim to have
-achieved that goal in every aspect of the software, but we strive for it.
-
-We welcome the use of this software as a component of commercial products.
-No royalty is required, but we do ask for an acknowledgement in product
-documentation, as described under LEGAL ISSUES.
-
-
-LEGAL ISSUES
-============
-
-In plain English:
-
-1. We don't promise that this software works.  (But if you find any bugs,
-   please let us know!)
-2. You can use this software for whatever you want.  You don't have to pay us.
-3. You may not pretend that you wrote this software.  If you use it in a
-   program, you must acknowledge somewhere in your documentation that
-   you've used the IJG code.
-
-In legalese:
-
-The authors make NO WARRANTY or representation, either express or implied,
-with respect to this software, its quality, accuracy, merchantability, or
-fitness for a particular purpose.  This software is provided "AS IS", and you,
-its user, assume the entire risk as to its quality and accuracy.
-
-This software is copyright (C) 1991-1998, Thomas G. Lane.
-All Rights Reserved except as specified below.
-
-Permission is hereby granted to use, copy, modify, and distribute this
-software (or portions thereof) for any purpose, without fee, subject to these
-conditions:
-(1) If any part of the source code for this software is distributed, then this
-README file must be included, with this copyright and no-warranty notice
-unaltered; and any additions, deletions, or changes to the original files
-must be clearly indicated in accompanying documentation.
-(2) If only executable code is distributed, then the accompanying
-documentation must state that "this software is based in part on the work of
-the Independent JPEG Group".
-(3) Permission for use of this software is granted only if the user accepts
-full responsibility for any undesirable consequences; the authors accept
-NO LIABILITY for damages of any kind.
-
-These conditions apply to any software derived from or based on the IJG code,
-not just to the unmodified library.  If you use our work, you ought to
-acknowledge us.
-
-Permission is NOT granted for the use of any IJG author's name or company name
-in advertising or publicity relating to this software or products derived from
-it.  This software may be referred to only as "the Independent JPEG Group's
-software".
-
-We specifically permit and encourage the use of this software as the basis of
-commercial products, provided that all warranty or liability claims are
-assumed by the product vendor.
-
-
-ansi2knr.c is included in this distribution by permission of L. Peter Deutsch,
-sole proprietor of its copyright holder, Aladdin Enterprises of Menlo Park, CA.
-ansi2knr.c is NOT covered by the above copyright and conditions, but instead
-by the usual distribution terms of the Free Software Foundation; principally,
-that you must include source code if you redistribute it.  (See the file
-ansi2knr.c for full details.)  However, since ansi2knr.c is not needed as part
-of any program generated from the IJG code, this does not limit you more than
-the foregoing paragraphs do.
-
-The Unix configuration script "configure" was produced with GNU Autoconf.
-It is copyright by the Free Software Foundation but is freely distributable.
-The same holds for its supporting scripts (config.guess, config.sub,
-ltconfig, ltmain.sh).  Another support script, install-sh, is copyright
-by M.I.T. but is also freely distributable.
-
-It appears that the arithmetic coding option of the JPEG spec is covered by
-patents owned by IBM, AT&T, and Mitsubishi.  Hence arithmetic coding cannot
-legally be used without obtaining one or more licenses.  For this reason,
-support for arithmetic coding has been removed from the free JPEG software.
-(Since arithmetic coding provides only a marginal gain over the unpatented
-Huffman mode, it is unlikely that very many implementations will support it.)
-So far as we are aware, there are no patent restrictions on the remaining
-code.
-
-The IJG distribution formerly included code to read and write GIF files.
-To avoid entanglement with the Unisys LZW patent, GIF reading support has
-been removed altogether, and the GIF writer has been simplified to produce
-"uncompressed GIFs".  This technique does not use the LZW algorithm; the
-resulting GIF files are larger than usual, but are readable by all standard
-GIF decoders.
-
-We are required to state that
-    "The Graphics Interchange Format(c) is the Copyright property of
-    CompuServe Incorporated.  GIF(sm) is a Service Mark property of
-    CompuServe Incorporated."
-
-
-REFERENCES
-==========
-
-We highly recommend reading one or more of these references before trying to
-understand the innards of the JPEG software.
-
-The best short technical introduction to the JPEG compression algorithm is
-	Wallace, Gregory K.  "The JPEG Still Picture Compression Standard",
-	Communications of the ACM, April 1991 (vol. 34 no. 4), pp. 30-44.
-(Adjacent articles in that issue discuss MPEG motion picture compression,
-applications of JPEG, and related topics.)  If you don't have the CACM issue
-handy, a PostScript file containing a revised version of Wallace's article is
-available at ftp://ftp.uu.net/graphics/jpeg/wallace.ps.gz.  The file (actually
-a preprint for an article that appeared in IEEE Trans. Consumer Electronics)
-omits the sample images that appeared in CACM, but it includes corrections
-and some added material.  Note: the Wallace article is copyright ACM and IEEE,
-and it may not be used for commercial purposes.
-
-A somewhat less technical, more leisurely introduction to JPEG can be found in
-"The Data Compression Book" by Mark Nelson and Jean-loup Gailly, published by
-M&T Books (New York), 2nd ed. 1996, ISBN 1-55851-434-1.  This book provides
-good explanations and example C code for a multitude of compression methods
-including JPEG.  It is an excellent source if you are comfortable reading C
-code but don't know much about data compression in general.  The book's JPEG
-sample code is far from industrial-strength, but when you are ready to look
-at a full implementation, you've got one here...
-
-The best full description of JPEG is the textbook "JPEG Still Image Data
-Compression Standard" by William B. Pennebaker and Joan L. Mitchell, published
-by Van Nostrand Reinhold, 1993, ISBN 0-442-01272-1.  Price US$59.95, 638 pp.
-The book includes the complete text of the ISO JPEG standards (DIS 10918-1
-and draft DIS 10918-2).  This is by far the most complete exposition of JPEG
-in existence, and we highly recommend it.
-
-The JPEG standard itself is not available electronically; you must order a
-paper copy through ISO or ITU.  (Unless you feel a need to own a certified
-official copy, we recommend buying the Pennebaker and Mitchell book instead;
-it's much cheaper and includes a great deal of useful explanatory material.)
-In the USA, copies of the standard may be ordered from ANSI Sales at (212)
-642-4900, or from Global Engineering Documents at (800) 854-7179.  (ANSI
-doesn't take credit card orders, but Global does.)  It's not cheap: as of
-1992, ANSI was charging $95 for Part 1 and $47 for Part 2, plus 7%
-shipping/handling.  The standard is divided into two parts, Part 1 being the
-actual specification, while Part 2 covers compliance testing methods.  Part 1
-is titled "Digital Compression and Coding of Continuous-tone Still Images,
-Part 1: Requirements and guidelines" and has document numbers ISO/IEC IS
-10918-1, ITU-T T.81.  Part 2 is titled "Digital Compression and Coding of
-Continuous-tone Still Images, Part 2: Compliance testing" and has document
-numbers ISO/IEC IS 10918-2, ITU-T T.83.
-
-Some extensions to the original JPEG standard are defined in JPEG Part 3,
-a newer ISO standard numbered ISO/IEC IS 10918-3 and ITU-T T.84.  IJG
-currently does not support any Part 3 extensions.
-
-The JPEG standard does not specify all details of an interchangeable file
-format.  For the omitted details we follow the "JFIF" conventions, revision
-1.02.  A copy of the JFIF spec is available from:
-	Literature Department
-	C-Cube Microsystems, Inc.
-	1778 McCarthy Blvd.
-	Milpitas, CA 95035
-	phone (408) 944-6300,  fax (408) 944-6314
-A PostScript version of this document is available by FTP at
-ftp://ftp.uu.net/graphics/jpeg/jfif.ps.gz.  There is also a plain text
-version at ftp://ftp.uu.net/graphics/jpeg/jfif.txt.gz, but it is missing
-the figures.
-
-The TIFF 6.0 file format specification can be obtained by FTP from
-ftp://ftp.sgi.com/graphics/tiff/TIFF6.ps.gz.  The JPEG incorporation scheme
-found in the TIFF 6.0 spec of 3-June-92 has a number of serious problems.
-IJG does not recommend use of the TIFF 6.0 design (TIFF Compression tag 6).
-Instead, we recommend the JPEG design proposed by TIFF Technical Note #2
-(Compression tag 7).  Copies of this Note can be obtained from ftp.sgi.com or
-from ftp://ftp.uu.net/graphics/jpeg/.  It is expected that the next revision
-of the TIFF spec will replace the 6.0 JPEG design with the Note's design.
-Although IJG's own code does not support TIFF/JPEG, the free libtiff library
-uses our library to implement TIFF/JPEG per the Note.  libtiff is available
-from ftp://ftp.sgi.com/graphics/tiff/.
-
-
-ARCHIVE LOCATIONS
-=================
-
-The "official" archive site for this software is ftp.uu.net (Internet
-address 192.48.96.9).  The most recent released version can always be found
-there in directory graphics/jpeg.  This particular version will be archived
-as ftp://ftp.uu.net/graphics/jpeg/jpegsrc.v6b.tar.gz.  If you don't have
-direct Internet access, UUNET's archives are also available via UUCP; contact
[email protected] for information on retrieving files that way.
-
-Numerous Internet sites maintain copies of the UUNET files.  However, only
-ftp.uu.net is guaranteed to have the latest official version.
-
-You can also obtain this software in DOS-compatible "zip" archive format from
-the SimTel archives (ftp://ftp.simtel.net/pub/simtelnet/msdos/graphics/), or
-on CompuServe in the Graphics Support forum (GO CIS:GRAPHSUP), library 12
-"JPEG Tools".  Again, these versions may sometimes lag behind the ftp.uu.net
-release.
-
-The JPEG FAQ (Frequently Asked Questions) article is a useful source of
-general information about JPEG.  It is updated constantly and therefore is
-not included in this distribution.  The FAQ is posted every two weeks to
-Usenet newsgroups comp.graphics.misc, news.answers, and other groups.
-It is available on the World Wide Web at http://www.faqs.org/faqs/jpeg-faq/
-and other news.answers archive sites, including the official news.answers
-archive at rtfm.mit.edu: ftp://rtfm.mit.edu/pub/usenet/news.answers/jpeg-faq/.
-If you don't have Web or FTP access, send e-mail to [email protected]
-with body
-	send usenet/news.answers/jpeg-faq/part1
-	send usenet/news.answers/jpeg-faq/part2
-
-
-RELATED SOFTWARE
-================
-
-Numerous viewing and image manipulation programs now support JPEG.  (Quite a
-few of them use this library to do so.)  The JPEG FAQ described above lists
-some of the more popular free and shareware viewers, and tells where to
-obtain them on Internet.
-
-If you are on a Unix machine, we highly recommend Jef Poskanzer's free
-PBMPLUS software, which provides many useful operations on PPM-format image
-files.  In particular, it can convert PPM images to and from a wide range of
-other formats, thus making cjpeg/djpeg considerably more useful.  The latest
-version is distributed by the NetPBM group, and is available from numerous
-sites, notably ftp://wuarchive.wustl.edu/graphics/graphics/packages/NetPBM/.
-Unfortunately PBMPLUS/NETPBM is not nearly as portable as the IJG software is;
-you are likely to have difficulty making it work on any non-Unix machine.
-
-A different free JPEG implementation, written by the PVRG group at Stanford,
-is available from ftp://havefun.stanford.edu/pub/jpeg/.  This program
-is designed for research and experimentation rather than production use;
-it is slower, harder to use, and less portable than the IJG code, but it
-is easier to read and modify.  Also, the PVRG code supports lossless JPEG,
-which we do not.  (On the other hand, it doesn't do progressive JPEG.)
-
-
-FILE FORMAT WARS
-================
-
-Some JPEG programs produce files that are not compatible with our library.
-The root of the problem is that the ISO JPEG committee failed to specify a
-concrete file format.  Some vendors "filled in the blanks" on their own,
-creating proprietary formats that no one else could read.  (For example, none
-of the early commercial JPEG implementations for the Macintosh were able to
-exchange compressed files.)
-
-The file format we have adopted is called JFIF (see REFERENCES).  This format
-has been agreed to by a number of major commercial JPEG vendors, and it has
-become the de facto standard.  JFIF is a minimal or "low end" representation.
-We recommend the use of TIFF/JPEG (TIFF revision 6.0 as modified by TIFF
-Technical Note #2) for "high end" applications that need to record a lot of
-additional data about an image.  TIFF/JPEG is fairly new and not yet widely
-supported, unfortunately.
-
-The upcoming JPEG Part 3 standard defines a file format called SPIFF.
-SPIFF is interoperable with JFIF, in the sense that most JFIF decoders should
-be able to read the most common variant of SPIFF.  SPIFF has some technical
-advantages over JFIF, but its major claim to fame is simply that it is an
-official standard rather than an informal one.  At this point it is unclear
-whether SPIFF will supersede JFIF or whether JFIF will remain the de-facto
-standard.  IJG intends to support SPIFF once the standard is frozen, but we
-have not decided whether it should become our default output format or not.
-(In any case, our decoder will remain capable of reading JFIF indefinitely.)
-
-Various proprietary file formats incorporating JPEG compression also exist.
-We have little or no sympathy for the existence of these formats.  Indeed,
-one of the original reasons for developing this free software was to help
-force convergence on common, open format standards for JPEG files.  Don't
-use a proprietary file format!
-
-
-TO DO
-=====
-
-The major thrust for v7 will probably be improvement of visual quality.
-The current method for scaling the quantization tables is known not to be
-very good at low Q values.  We also intend to investigate block boundary
-smoothing, "poor man's variable quantization", and other means of improving
-quality-vs-file-size performance without sacrificing compatibility.
-
-In future versions, we are considering supporting some of the upcoming JPEG
-Part 3 extensions --- principally, variable quantization and the SPIFF file
-format.
-
-As always, speeding things up is of great interest.
-
-Please send bug reports, offers of help, etc. to [email protected].

Engine/lib/ljpeg/extras/ansi2knr.1

@@ -1,36 +0,0 @@
-.TH ANSI2KNR 1 "19 Jan 1996"
-.SH NAME
-ansi2knr \- convert ANSI C to Kernighan & Ritchie C
-.SH SYNOPSIS
-.I ansi2knr
-[--varargs] input_file [output_file]
-.SH DESCRIPTION
-If no output_file is supplied, output goes to stdout.
-.br
-There are no error messages.
-.sp
-.I ansi2knr
-recognizes function definitions by seeing a non-keyword identifier at the left
-margin, followed by a left parenthesis, with a right parenthesis as the last
-character on the line, and with a left brace as the first token on the
-following line (ignoring possible intervening comments).  It will recognize a
-multi-line header provided that no intervening line ends with a left or right
-brace or a semicolon.  These algorithms ignore whitespace and comments, except
-that the function name must be the first thing on the line.
-.sp
-The following constructs will confuse it:
-.br
-     - Any other construct that starts at the left margin and follows the
-above syntax (such as a macro or function call).
-.br
-     - Some macros that tinker with the syntax of the function header.
-.sp
-The --varargs switch is obsolete, and is recognized only for
-backwards compatibility.  The present version of
-.I ansi2knr
-will always attempt to convert a ... argument to va_alist and va_dcl.
-.SH AUTHOR
-L. Peter Deutsch <[email protected]> wrote the original ansi2knr and
-continues to maintain the current version; most of the code in the current
-version is his work.  ansi2knr also includes contributions by Francois
-Pinard <[email protected]> and Jim Avera <[email protected]>.

Engine/lib/ljpeg/extras/ansi2knr.c

@@ -1,693 +0,0 @@
-/* ansi2knr.c */
-/* Convert ANSI C function definitions to K&R ("traditional C") syntax */
-
-/*
-ansi2knr is distributed in the hope that it will be useful, but WITHOUT ANY
-WARRANTY.  No author or distributor accepts responsibility to anyone for the
-consequences of using it or for whether it serves any particular purpose or
-works at all, unless he says so in writing.  Refer to the GNU General Public
-License (the "GPL") for full details.
-
-Everyone is granted permission to copy, modify and redistribute ansi2knr,
-but only under the conditions described in the GPL.  A copy of this license
-is supposed to have been given to you along with ansi2knr so you can know
-your rights and responsibilities.  It should be in a file named COPYLEFT.
-[In the IJG distribution, the GPL appears below, not in a separate file.]
-Among other things, the copyright notice and this notice must be preserved
-on all copies.
-
-We explicitly state here what we believe is already implied by the GPL: if
-the ansi2knr program is distributed as a separate set of sources and a
-separate executable file which are aggregated on a storage medium together
-with another program, this in itself does not bring the other program under
-the GPL, nor does the mere fact that such a program or the procedures for
-constructing it invoke the ansi2knr executable bring any other part of the
-program under the GPL.
-*/
-
-/*
----------- Here is the GNU GPL file COPYLEFT, referred to above ----------
------ These terms do NOT apply to the JPEG software itself; see README ------
-
-		    GHOSTSCRIPT GENERAL PUBLIC LICENSE
-		    (Clarified 11 Feb 1988)
-
- Copyright (C) 1988 Richard M. Stallman
- Everyone is permitted to copy and distribute verbatim copies of this
- license, but changing it is not allowed.  You can also use this wording
- to make the terms for other programs.
-
-  The license agreements of most software companies keep you at the
-mercy of those companies.  By contrast, our general public license is
-intended to give everyone the right to share Ghostscript.  To make sure
-that you get the rights we want you to have, we need to make
-restrictions that forbid anyone to deny you these rights or to ask you
-to surrender the rights.  Hence this license agreement.
-
-  Specifically, we want to make sure that you have the right to give
-away copies of Ghostscript, that you receive source code or else can get
-it if you want it, that you can change Ghostscript or use pieces of it
-in new free programs, and that you know you can do these things.
-
-  To make sure that everyone has such rights, we have to forbid you to
-deprive anyone else of these rights.  For example, if you distribute
-copies of Ghostscript, you must give the recipients all the rights that
-you have.  You must make sure that they, too, receive or can get the
-source code.  And you must tell them their rights.
-
-  Also, for our own protection, we must make certain that everyone finds
-out that there is no warranty for Ghostscript.  If Ghostscript is
-modified by someone else and passed on, we want its recipients to know
-that what they have is not what we distributed, so that any problems
-introduced by others will not reflect on our reputation.
-
-  Therefore we (Richard M. Stallman and the Free Software Foundation,
-Inc.) make the following terms which say what you must do to be allowed
-to distribute or change Ghostscript.
-
-
-			COPYING POLICIES
-
-  1. You may copy and distribute verbatim copies of Ghostscript source
-code as you receive it, in any medium, provided that you conspicuously
-and appropriately publish on each copy a valid copyright and license
-notice "Copyright (C) 1989 Aladdin Enterprises.  All rights reserved.
-Distributed by Free Software Foundation, Inc." (or with whatever year is
-appropriate); keep intact the notices on all files that refer to this
-License Agreement and to the absence of any warranty; and give any other
-recipients of the Ghostscript program a copy of this License Agreement
-along with the program.  You may charge a distribution fee for the
-physical act of transferring a copy.
-
-  2. You may modify your copy or copies of Ghostscript or any portion of
-it, and copy and distribute such modifications under the terms of
-Paragraph 1 above, provided that you also do the following:
-
-    a) cause the modified files to carry prominent notices stating
-    that you changed the files and the date of any change; and
-
-    b) cause the whole of any work that you distribute or publish,
-    that in whole or in part contains or is a derivative of Ghostscript
-    or any part thereof, to be licensed at no charge to all third
-    parties on terms identical to those contained in this License
-    Agreement (except that you may choose to grant more extensive
-    warranty protection to some or all third parties, at your option).
-
-    c) You may charge a distribution fee for the physical act of
-    transferring a copy, and you may at your option offer warranty
-    protection in exchange for a fee.
-
-Mere aggregation of another unrelated program with this program (or its
-derivative) on a volume of a storage or distribution medium does not bring
-the other program under the scope of these terms.
-
-  3. You may copy and distribute Ghostscript (or a portion or derivative
-of it, under Paragraph 2) in object code or executable form under the
-terms of Paragraphs 1 and 2 above provided that you also do one of the
-following:
-
-    a) accompany it with the complete corresponding machine-readable
-    source code, which must be distributed under the terms of
-    Paragraphs 1 and 2 above; or,
-
-    b) accompany it with a written offer, valid for at least three
-    years, to give any third party free (except for a nominal
-    shipping charge) a complete machine-readable copy of the
-    corresponding source code, to be distributed under the terms of
-    Paragraphs 1 and 2 above; or,
-
-    c) accompany it with the information you received as to where the
-    corresponding source code may be obtained.  (This alternative is
-    allowed only for noncommercial distribution and only if you
-    received the program in object code or executable form alone.)
-
-For an executable file, complete source code means all the source code for
-all modules it contains; but, as a special exception, it need not include
-source code for modules which are standard libraries that accompany the
-operating system on which the executable file runs.
-
-  4. You may not copy, sublicense, distribute or transfer Ghostscript
-except as expressly provided under this License Agreement.  Any attempt
-otherwise to copy, sublicense, distribute or transfer Ghostscript is
-void and your rights to use the program under this License agreement
-shall be automatically terminated.  However, parties who have received
-computer software programs from you with this License Agreement will not
-have their licenses terminated so long as such parties remain in full
-compliance.
-
-  5. If you wish to incorporate parts of Ghostscript into other free
-programs whose distribution conditions are different, write to the Free
-Software Foundation at 675 Mass Ave, Cambridge, MA 02139.  We have not
-yet worked out a simple rule that can be stated here, but we will often
-permit this.  We will be guided by the two goals of preserving the free
-status of all derivatives of our free software and of promoting the
-sharing and reuse of software.
-
-Your comments and suggestions about our licensing policies and our
-software are welcome!  Please contact the Free Software Foundation,
-Inc., 675 Mass Ave, Cambridge, MA 02139, or call (617) 876-3296.
-
-		       NO WARRANTY
-
-  BECAUSE GHOSTSCRIPT IS LICENSED FREE OF CHARGE, WE PROVIDE ABSOLUTELY
-NO WARRANTY, TO THE EXTENT PERMITTED BY APPLICABLE STATE LAW.  EXCEPT
-WHEN OTHERWISE STATED IN WRITING, FREE SOFTWARE FOUNDATION, INC, RICHARD
-M. STALLMAN, ALADDIN ENTERPRISES, L. PETER DEUTSCH, AND/OR OTHER PARTIES
-PROVIDE GHOSTSCRIPT "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER
-EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE
-ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF GHOSTSCRIPT IS WITH
-YOU.  SHOULD GHOSTSCRIPT PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL
-NECESSARY SERVICING, REPAIR OR CORRECTION.
-
-  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW WILL RICHARD M.
-STALLMAN, THE FREE SOFTWARE FOUNDATION, INC., L. PETER DEUTSCH, ALADDIN
-ENTERPRISES, AND/OR ANY OTHER PARTY WHO MAY MODIFY AND REDISTRIBUTE
-GHOSTSCRIPT AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING
-ANY LOST PROFITS, LOST MONIES, OR OTHER SPECIAL, INCIDENTAL OR
-CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE
-(INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED
-INACCURATE OR LOSSES SUSTAINED BY THIRD PARTIES OR A FAILURE OF THE
-PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS) GHOSTSCRIPT, EVEN IF YOU
-HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM
-BY ANY OTHER PARTY.
-
--------------------- End of file COPYLEFT ------------------------------
-*/
-
-/*
- * Usage:
-	ansi2knr input_file [output_file]
- * If no output_file is supplied, output goes to stdout.
- * There are no error messages.
- *
- * ansi2knr recognizes function definitions by seeing a non-keyword
- * identifier at the left margin, followed by a left parenthesis,
- * with a right parenthesis as the last character on the line,
- * and with a left brace as the first token on the following line
- * (ignoring possible intervening comments).
- * It will recognize a multi-line header provided that no intervening
- * line ends with a left or right brace or a semicolon.
- * These algorithms ignore whitespace and comments, except that
- * the function name must be the first thing on the line.
- * The following constructs will confuse it:
- *	- Any other construct that starts at the left margin and
- *	    follows the above syntax (such as a macro or function call).
- *	- Some macros that tinker with the syntax of the function header.
- */
-
-/*
- * The original and principal author of ansi2knr is L. Peter Deutsch
- * <[email protected]>.  Other authors are noted in the change history
- * that follows (in reverse chronological order):
-	lpd 96-01-21 added code to cope with not HAVE_CONFIG_H and with
-		compilers that don't understand void, as suggested by
-		Tom Lane
-	lpd 96-01-15 changed to require that the first non-comment token
-		on the line following a function header be a left brace,
-		to reduce sensitivity to macros, as suggested by Tom Lane
-		<[email protected]>
-	lpd 95-06-22 removed #ifndefs whose sole purpose was to define
-		undefined preprocessor symbols as 0; changed all #ifdefs
-		for configuration symbols to #ifs
-	lpd 95-04-05 changed copyright notice to make it clear that
-		including ansi2knr in a program does not bring the entire
-		program under the GPL
-	lpd 94-12-18 added conditionals for systems where ctype macros
-		don't handle 8-bit characters properly, suggested by
-		Francois Pinard <[email protected]>;
-		removed --varargs switch (this is now the default)
-	lpd 94-10-10 removed CONFIG_BROKETS conditional
-	lpd 94-07-16 added some conditionals to help GNU `configure',
-		suggested by Francois Pinard <[email protected]>;
-		properly erase prototype args in function parameters,
-		contributed by Jim Avera <[email protected]>;
-		correct error in writeblanks (it shouldn't erase EOLs)
-	lpd 89-xx-xx original version
- */
-
-/* Most of the conditionals here are to make ansi2knr work with */
-/* or without the GNU configure machinery. */
-
-#if HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-#include <stdio.h>
-#include <ctype.h>
-
-#if HAVE_CONFIG_H
-
-/*
-   For properly autoconfiguring ansi2knr, use AC_CONFIG_HEADER(config.h).
-   This will define HAVE_CONFIG_H and so, activate the following lines.
- */
-
-# if STDC_HEADERS || HAVE_STRING_H
-#  include <string.h>
-# else
-#  include <strings.h>
-# endif
-
-#else /* not HAVE_CONFIG_H */
-
-/* Otherwise do it the hard way */
-
-# ifdef BSD
-#  include <strings.h>
-# else
-#  ifdef VMS
-    extern int strlen(), strncmp();
-#  else
-#   include <string.h>
-#  endif
-# endif
-
-#endif /* not HAVE_CONFIG_H */
-
-#if STDC_HEADERS
-# include <stdlib.h>
-#else
-/*
-   malloc and free should be declared in stdlib.h,
-   but if you've got a K&R compiler, they probably aren't.
- */
-# ifdef MSDOS
-#  include <malloc.h>
-# else
-#  ifdef VMS
-     extern char *malloc();
-     extern void free();
-#  else
-     extern char *malloc();
-     extern int free();
-#  endif
-# endif
-
-#endif
-
-/*
- * The ctype macros don't always handle 8-bit characters correctly.
- * Compensate for this here.
- */
-#ifdef isascii
-#  undef HAVE_ISASCII		/* just in case */
-#  define HAVE_ISASCII 1
-#else
-#endif
-#if STDC_HEADERS || !HAVE_ISASCII
-#  define is_ascii(c) 1
-#else
-#  define is_ascii(c) isascii(c)
-#endif
-
-#define is_space(c) (is_ascii(c) && isspace(c))
-#define is_alpha(c) (is_ascii(c) && isalpha(c))
-#define is_alnum(c) (is_ascii(c) && isalnum(c))
-
-/* Scanning macros */
-#define isidchar(ch) (is_alnum(ch) || (ch) == '_')
-#define isidfirstchar(ch) (is_alpha(ch) || (ch) == '_')
-
-/* Forward references */
-char *skipspace();
-int writeblanks();
-int test1();
-int convert1();
-
-/* The main program */
-int
-main(argc, argv)
-    int argc;
-    char *argv[];
-{	FILE *in, *out;
-#define bufsize 5000			/* arbitrary size */
-	char *buf;
-	char *line;
-	char *more;
-	/*
-	 * In previous versions, ansi2knr recognized a --varargs switch.
-	 * If this switch was supplied, ansi2knr would attempt to convert
-	 * a ... argument to va_alist and va_dcl; if this switch was not
-	 * supplied, ansi2knr would simply drop any such arguments.
-	 * Now, ansi2knr always does this conversion, and we only
-	 * check for this switch for backward compatibility.
-	 */
-	int convert_varargs = 1;
-
-	if ( argc > 1 && argv[1][0] == '-' )
-	  {	if ( !strcmp(argv[1], "--varargs") )
-		  {	convert_varargs = 1;
-			argc--;
-			argv++;
-		  }
-		else
-		  {	fprintf(stderr, "Unrecognized switch: %s\n", argv[1]);
-			exit(1);
-		  }
-	  }
-	switch ( argc )
-	   {
-	default:
-		printf("Usage: ansi2knr input_file [output_file]\n");
-		exit(0);
-	case 2:
-		out = stdout;
-		break;
-	case 3:
-		out = fopen(argv[2], "w");
-		if ( out == NULL )
-		   {	fprintf(stderr, "Cannot open output file %s\n", argv[2]);
-			exit(1);
-		   }
-	   }
-	in = fopen(argv[1], "r");
-	if ( in == NULL )
-	   {	fprintf(stderr, "Cannot open input file %s\n", argv[1]);
-		exit(1);
-	   }
-	fprintf(out, "#line 1 \"%s\"\n", argv[1]);
-	buf = malloc(bufsize);
-	line = buf;
-	while ( fgets(line, (unsigned)(buf + bufsize - line), in) != NULL )
-	   {
-test:		line += strlen(line);
-		switch ( test1(buf) )
-		   {
-		case 2:			/* a function header */
-			convert1(buf, out, 1, convert_varargs);
-			break;
-		case 1:			/* a function */
-			/* Check for a { at the start of the next line. */
-			more = ++line;
-f:			if ( line >= buf + (bufsize - 1) ) /* overflow check */
-			  goto wl;
-			if ( fgets(line, (unsigned)(buf + bufsize - line), in) == NULL )
-			  goto wl;
-			switch ( *skipspace(more, 1) )
-			  {
-			  case '{':
-			    /* Definitely a function header. */
-			    convert1(buf, out, 0, convert_varargs);
-			    fputs(more, out);
-			    break;
-			  case 0:
-			    /* The next line was blank or a comment: */
-			    /* keep scanning for a non-comment. */
-			    line += strlen(line);
-			    goto f;
-			  default:
-			    /* buf isn't a function header, but */
-			    /* more might be. */
-			    fputs(buf, out);
-			    strcpy(buf, more);
-			    line = buf;
-			    goto test;
-			  }
-			break;
-		case -1:		/* maybe the start of a function */
-			if ( line != buf + (bufsize - 1) ) /* overflow check */
-			  continue;
-			/* falls through */
-		default:		/* not a function */
-wl:			fputs(buf, out);
-			break;
-		   }
-		line = buf;
-	   }
-	if ( line != buf )
-	  fputs(buf, out);
-	free(buf);
-	fclose(out);
-	fclose(in);
-	return 0;
-}
-
-/* Skip over space and comments, in either direction. */
-char *
-skipspace(p, dir)
-    register char *p;
-    register int dir;			/* 1 for forward, -1 for backward */
-{	for ( ; ; )
-	   {	while ( is_space(*p) )
-		  p += dir;
-		if ( !(*p == '/' && p[dir] == '*') )
-		  break;
-		p += dir;  p += dir;
-		while ( !(*p == '*' && p[dir] == '/') )
-		   {	if ( *p == 0 )
-			  return p;	/* multi-line comment?? */
-			p += dir;
-		   }
-		p += dir;  p += dir;
-	   }
-	return p;
-}
-
-/*
- * Write blanks over part of a string.
- * Don't overwrite end-of-line characters.
- */
-int
-writeblanks(start, end)
-    char *start;
-    char *end;
-{	char *p;
-	for ( p = start; p < end; p++ )
-	  if ( *p != '\r' && *p != '\n' )
-	    *p = ' ';
-	return 0;
-}
-
-/*
- * Test whether the string in buf is a function definition.
- * The string may contain and/or end with a newline.
- * Return as follows:
- *	0 - definitely not a function definition;
- *	1 - definitely a function definition;
- *	2 - definitely a function prototype (NOT USED);
- *	-1 - may be the beginning of a function definition,
- *		append another line and look again.
- * The reason we don't attempt to convert function prototypes is that
- * Ghostscript's declaration-generating macros look too much like
- * prototypes, and confuse the algorithms.
- */
-int
-test1(buf)
-    char *buf;
-{	register char *p = buf;
-	char *bend;
-	char *endfn;
-	int contin;
-
-	if ( !isidfirstchar(*p) )
-	  return 0;		/* no name at left margin */
-	bend = skipspace(buf + strlen(buf) - 1, -1);
-	switch ( *bend )
-	   {
-	   case ';': contin = 0 /*2*/; break;
-	   case ')': contin = 1; break;
-	   case '{': return 0;		/* not a function */
-	   case '}': return 0;		/* not a function */
-	   default: contin = -1;
-	   }
-	while ( isidchar(*p) )
-	  p++;
-	endfn = p;
-	p = skipspace(p, 1);
-	if ( *p++ != '(' )
-	  return 0;		/* not a function */
-	p = skipspace(p, 1);
-	if ( *p == ')' )
-	  return 0;		/* no parameters */
-	/* Check that the apparent function name isn't a keyword. */
-	/* We only need to check for keywords that could be followed */
-	/* by a left parenthesis (which, unfortunately, is most of them). */
-	   {	static char *words[] =
-		   {	"asm", "auto", "case", "char", "const", "double",
-			"extern", "float", "for", "if", "int", "long",
-			"register", "return", "short", "signed", "sizeof",
-			"static", "switch", "typedef", "unsigned",
-			"void", "volatile", "while", 0
-		   };
-		char **key = words;
-		char *kp;
-		int len = endfn - buf;
-
-		while ( (kp = *key) != 0 )
-		   {	if ( strlen(kp) == len && !strncmp(kp, buf, len) )
-			  return 0;	/* name is a keyword */
-			key++;
-		   }
-	   }
-	return contin;
-}
-
-/* Convert a recognized function definition or header to K&R syntax. */
-int
-convert1(buf, out, header, convert_varargs)
-    char *buf;
-    FILE *out;
-    int header;			/* Boolean */
-    int convert_varargs;	/* Boolean */
-{	char *endfn;
-	register char *p;
-	char **breaks;
-	unsigned num_breaks = 2;	/* for testing */
-	char **btop;
-	char **bp;
-	char **ap;
-	char *vararg = 0;
-
-	/* Pre-ANSI implementations don't agree on whether strchr */
-	/* is called strchr or index, so we open-code it here. */
-	for ( endfn = buf; *(endfn++) != '('; )
-	  ;
-top:	p = endfn;
-	breaks = (char **)malloc(sizeof(char *) * num_breaks * 2);
-	if ( breaks == 0 )
-	   {	/* Couldn't allocate break table, give up */
-		fprintf(stderr, "Unable to allocate break table!\n");
-		fputs(buf, out);
-		return -1;
-	   }
-	btop = breaks + num_breaks * 2 - 2;
-	bp = breaks;
-	/* Parse the argument list */
-	do
-	   {	int level = 0;
-		char *lp = NULL;
-		char *rp;
-		char *end = NULL;
-
-		if ( bp >= btop )
-		   {	/* Filled up break table. */
-			/* Allocate a bigger one and start over. */
-			free((char *)breaks);
-			num_breaks <<= 1;
-			goto top;
-		   }
-		*bp++ = p;
-		/* Find the end of the argument */
-		for ( ; end == NULL; p++ )
-		   {	switch(*p)
-			   {
-			   case ',':
-				if ( !level ) end = p;
-				break;
-			   case '(':
-				if ( !level ) lp = p;
-				level++;
-				break;
-			   case ')':
-				if ( --level < 0 ) end = p;
-				else rp = p;
-				break;
-			   case '/':
-				p = skipspace(p, 1) - 1;
-				break;
-			   default:
-				;
-			   }
-		   }
-		/* Erase any embedded prototype parameters. */
-		if ( lp )
-		  writeblanks(lp + 1, rp);
-		p--;			/* back up over terminator */
-		/* Find the name being declared. */
-		/* This is complicated because of procedure and */
-		/* array modifiers. */
-		for ( ; ; )
-		   {	p = skipspace(p - 1, -1);
-			switch ( *p )
-			   {
-			   case ']':	/* skip array dimension(s) */
-			   case ')':	/* skip procedure args OR name */
-			   {	int level = 1;
-				while ( level )
-				 switch ( *--p )
-				   {
-				   case ']': case ')': level++; break;
-				   case '[': case '(': level--; break;
-				   case '/': p = skipspace(p, -1) + 1; break;
-				   default: ;
-				   }
-			   }
-				if ( *p == '(' && *skipspace(p + 1, 1) == '*' )
-				   {	/* We found the name being declared */
-					while ( !isidfirstchar(*p) )
-					  p = skipspace(p, 1) + 1;
-					goto found;
-				   }
-				break;
-			   default:
-				goto found;
-			   }
-		   }
-found:		if ( *p == '.' && p[-1] == '.' && p[-2] == '.' )
-		  {	if ( convert_varargs )
-			  {	*bp++ = "va_alist";
-				vararg = p-2;
-			  }
-			else
-			  {	p++;
-				if ( bp == breaks + 1 )	/* sole argument */
-				  writeblanks(breaks[0], p);
-				else
-				  writeblanks(bp[-1] - 1, p);
-				bp--;
-			  }
-		   }
-		else
-		   {	while ( isidchar(*p) ) p--;
-			*bp++ = p+1;
-		   }
-		p = end;
-	   }
-	while ( *p++ == ',' );
-	*bp = p;
-	/* Make a special check for 'void' arglist */
-	if ( bp == breaks+2 )
-	   {	p = skipspace(breaks[0], 1);
-		if ( !strncmp(p, "void", 4) )
-		   {	p = skipspace(p+4, 1);
-			if ( p == breaks[2] - 1 )
-			   {	bp = breaks;	/* yup, pretend arglist is empty */
-				writeblanks(breaks[0], p + 1);
-			   }
-		   }
-	   }
-	/* Put out the function name and left parenthesis. */
-	p = buf;
-	while ( p != endfn ) putc(*p, out), p++;
-	/* Put out the declaration. */
-	if ( header )
-	  {	fputs(");", out);
-		for ( p = breaks[0]; *p; p++ )
-		  if ( *p == '\r' || *p == '\n' )
-		    putc(*p, out);
-	  }
-	else
-	  {	for ( ap = breaks+1; ap < bp; ap += 2 )
-		  {	p = *ap;
-			while ( isidchar(*p) )
-			  putc(*p, out), p++;
-			if ( ap < bp - 1 )
-			  fputs(", ", out);
-		  }
-		fputs(")  ", out);
-		/* Put out the argument declarations */
-		for ( ap = breaks+2; ap <= bp; ap += 2 )
-		  (*ap)[-1] = ';';
-		if ( vararg != 0 )
-		  {	*vararg = 0;
-			fputs(breaks[0], out);		/* any prior args */
-			fputs("va_dcl", out);		/* the final arg */
-			fputs(bp[0], out);
-		  }
-		else
-		  fputs(breaks[0], out);
-	  }
-	free((char *)breaks);
-	return 0;
-}

Engine/lib/ljpeg/extras/cderror.h

@@ -1,132 +0,0 @@
-/*
- * cderror.h
- *
- * Copyright (C) 1994-1997, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file defines the error and message codes for the cjpeg/djpeg
- * applications.  These strings are not needed as part of the JPEG library
- * proper.
- * Edit this file to add new codes, or to translate the message strings to
- * some other language.
- */
-
-/*
- * To define the enum list of message codes, include this file without
- * defining macro JMESSAGE.  To create a message string table, include it
- * again with a suitable JMESSAGE definition (see jerror.c for an example).
- */
-#ifndef JMESSAGE
-#ifndef CDERROR_H
-#define CDERROR_H
-/* First time through, define the enum list */
-#define JMAKE_ENUM_LIST
-#else
-/* Repeated inclusions of this file are no-ops unless JMESSAGE is defined */
-#define JMESSAGE(code,string)
-#endif /* CDERROR_H */
-#endif /* JMESSAGE */
-
-#ifdef JMAKE_ENUM_LIST
-
-typedef enum {
-
-#define JMESSAGE(code,string)	code ,
-
-#endif /* JMAKE_ENUM_LIST */
-
-JMESSAGE(JMSG_FIRSTADDONCODE=1000, NULL) /* Must be first entry! */
-
-#ifdef BMP_SUPPORTED
-JMESSAGE(JERR_BMP_BADCMAP, "Unsupported BMP colormap format")
-JMESSAGE(JERR_BMP_BADDEPTH, "Only 8- and 24-bit BMP files are supported")
-JMESSAGE(JERR_BMP_BADHEADER, "Invalid BMP file: bad header length")
-JMESSAGE(JERR_BMP_BADPLANES, "Invalid BMP file: biPlanes not equal to 1")
-JMESSAGE(JERR_BMP_COLORSPACE, "BMP output must be grayscale or RGB")
-JMESSAGE(JERR_BMP_COMPRESSED, "Sorry, compressed BMPs not yet supported")
-JMESSAGE(JERR_BMP_NOT, "Not a BMP file - does not start with BM")
-JMESSAGE(JTRC_BMP, "%ux%u 24-bit BMP image")
-JMESSAGE(JTRC_BMP_MAPPED, "%ux%u 8-bit colormapped BMP image")
-JMESSAGE(JTRC_BMP_OS2, "%ux%u 24-bit OS2 BMP image")
-JMESSAGE(JTRC_BMP_OS2_MAPPED, "%ux%u 8-bit colormapped OS2 BMP image")
-#endif /* BMP_SUPPORTED */
-
-#ifdef GIF_SUPPORTED
-JMESSAGE(JERR_GIF_BUG, "GIF output got confused")
-JMESSAGE(JERR_GIF_CODESIZE, "Bogus GIF codesize %d")
-JMESSAGE(JERR_GIF_COLORSPACE, "GIF output must be grayscale or RGB")
-JMESSAGE(JERR_GIF_IMAGENOTFOUND, "Too few images in GIF file")
-JMESSAGE(JERR_GIF_NOT, "Not a GIF file")
-JMESSAGE(JTRC_GIF, "%ux%ux%d GIF image")
-JMESSAGE(JTRC_GIF_BADVERSION,
-	 "Warning: unexpected GIF version number '%c%c%c'")
-JMESSAGE(JTRC_GIF_EXTENSION, "Ignoring GIF extension block of type 0x%02x")
-JMESSAGE(JTRC_GIF_NONSQUARE, "Caution: nonsquare pixels in input")
-JMESSAGE(JWRN_GIF_BADDATA, "Corrupt data in GIF file")
-JMESSAGE(JWRN_GIF_CHAR, "Bogus char 0x%02x in GIF file, ignoring")
-JMESSAGE(JWRN_GIF_ENDCODE, "Premature end of GIF image")
-JMESSAGE(JWRN_GIF_NOMOREDATA, "Ran out of GIF bits")
-#endif /* GIF_SUPPORTED */
-
-#ifdef PPM_SUPPORTED
-JMESSAGE(JERR_PPM_COLORSPACE, "PPM output must be grayscale or RGB")
-JMESSAGE(JERR_PPM_NONNUMERIC, "Nonnumeric data in PPM file")
-JMESSAGE(JERR_PPM_NOT, "Not a PPM/PGM file")
-JMESSAGE(JTRC_PGM, "%ux%u PGM image")
-JMESSAGE(JTRC_PGM_TEXT, "%ux%u text PGM image")
-JMESSAGE(JTRC_PPM, "%ux%u PPM image")
-JMESSAGE(JTRC_PPM_TEXT, "%ux%u text PPM image")
-#endif /* PPM_SUPPORTED */
-
-#ifdef RLE_SUPPORTED
-JMESSAGE(JERR_RLE_BADERROR, "Bogus error code from RLE library")
-JMESSAGE(JERR_RLE_COLORSPACE, "RLE output must be grayscale or RGB")
-JMESSAGE(JERR_RLE_DIMENSIONS, "Image dimensions (%ux%u) too large for RLE")
-JMESSAGE(JERR_RLE_EMPTY, "Empty RLE file")
-JMESSAGE(JERR_RLE_EOF, "Premature EOF in RLE header")
-JMESSAGE(JERR_RLE_MEM, "Insufficient memory for RLE header")
-JMESSAGE(JERR_RLE_NOT, "Not an RLE file")
-JMESSAGE(JERR_RLE_TOOMANYCHANNELS, "Cannot handle %d output channels for RLE")
-JMESSAGE(JERR_RLE_UNSUPPORTED, "Cannot handle this RLE setup")
-JMESSAGE(JTRC_RLE, "%ux%u full-color RLE file")
-JMESSAGE(JTRC_RLE_FULLMAP, "%ux%u full-color RLE file with map of length %d")
-JMESSAGE(JTRC_RLE_GRAY, "%ux%u grayscale RLE file")
-JMESSAGE(JTRC_RLE_MAPGRAY, "%ux%u grayscale RLE file with map of length %d")
-JMESSAGE(JTRC_RLE_MAPPED, "%ux%u colormapped RLE file with map of length %d")
-#endif /* RLE_SUPPORTED */
-
-#ifdef TARGA_SUPPORTED
-JMESSAGE(JERR_TGA_BADCMAP, "Unsupported Targa colormap format")
-JMESSAGE(JERR_TGA_BADPARMS, "Invalid or unsupported Targa file")
-JMESSAGE(JERR_TGA_COLORSPACE, "Targa output must be grayscale or RGB")
-JMESSAGE(JTRC_TGA, "%ux%u RGB Targa image")
-JMESSAGE(JTRC_TGA_GRAY, "%ux%u grayscale Targa image")
-JMESSAGE(JTRC_TGA_MAPPED, "%ux%u colormapped Targa image")
-#else
-JMESSAGE(JERR_TGA_NOTCOMP, "Targa support was not compiled")
-#endif /* TARGA_SUPPORTED */
-
-JMESSAGE(JERR_BAD_CMAP_FILE,
-	 "Color map file is invalid or of unsupported format")
-JMESSAGE(JERR_TOO_MANY_COLORS,
-	 "Output file format cannot handle %d colormap entries")
-JMESSAGE(JERR_UNGETC_FAILED, "ungetc failed")
-#ifdef TARGA_SUPPORTED
-JMESSAGE(JERR_UNKNOWN_FORMAT,
-	 "Unrecognized input file format --- perhaps you need -targa")
-#else
-JMESSAGE(JERR_UNKNOWN_FORMAT, "Unrecognized input file format")
-#endif
-JMESSAGE(JERR_UNSUPPORTED_FORMAT, "Unsupported output file format")
-
-#ifdef JMAKE_ENUM_LIST
-
-  JMSG_LASTADDONCODE
-} ADDON_MESSAGE_CODE;
-
-#undef JMAKE_ENUM_LIST
-#endif /* JMAKE_ENUM_LIST */
-
-/* Zap JMESSAGE macro so that future re-inclusions do nothing by default */
-#undef JMESSAGE

Engine/lib/ljpeg/extras/cdjpeg.c

@@ -1,181 +0,0 @@
-/*
- * cdjpeg.c
- *
- * Copyright (C) 1991-1997, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains common support routines used by the IJG application
- * programs (cjpeg, djpeg, jpegtran).
- */
-
-#include "cdjpeg.h"		/* Common decls for cjpeg/djpeg applications */
-#include <ctype.h>		/* to declare isupper(), tolower() */
-#ifdef NEED_SIGNAL_CATCHER
-#include <signal.h>		/* to declare signal() */
-#endif
-#ifdef USE_SETMODE
-#include <fcntl.h>		/* to declare setmode()'s parameter macros */
-/* If you have setmode() but not <io.h>, just delete this line: */
-#include <io.h>			/* to declare setmode() */
-#endif
-
-
-/*
- * Signal catcher to ensure that temporary files are removed before aborting.
- * NB: for Amiga Manx C this is actually a global routine named _abort();
- * we put "#define signal_catcher _abort" in jconfig.h.  Talk about bogus...
- */
-
-#ifdef NEED_SIGNAL_CATCHER
-
-static j_common_ptr sig_cinfo;
-
-void				/* must be global for Manx C */
-signal_catcher (int signum)
-{
-  if (sig_cinfo != NULL) {
-    if (sig_cinfo->err != NULL) /* turn off trace output */
-      sig_cinfo->err->trace_level = 0;
-    jpeg_destroy(sig_cinfo);	/* clean up memory allocation & temp files */
-  }
-  exit(EXIT_FAILURE);
-}
-
-
-GLOBAL(void)
-enable_signal_catcher (j_common_ptr cinfo)
-{
-  sig_cinfo = cinfo;
-#ifdef SIGINT			/* not all systems have SIGINT */
-  signal(SIGINT, signal_catcher);
-#endif
-#ifdef SIGTERM			/* not all systems have SIGTERM */
-  signal(SIGTERM, signal_catcher);
-#endif
-}
-
-#endif
-
-
-/*
- * Optional progress monitor: display a percent-done figure on stderr.
- */
-
-#ifdef PROGRESS_REPORT
-
-METHODDEF(void)
-progress_monitor (j_common_ptr cinfo)
-{
-  cd_progress_ptr prog = (cd_progress_ptr) cinfo->progress;
-  int total_passes = prog->pub.total_passes + prog->total_extra_passes;
-  int percent_done = (int) (prog->pub.pass_counter*100L/prog->pub.pass_limit);
-
-  if (percent_done != prog->percent_done) {
-    prog->percent_done = percent_done;
-    if (total_passes > 1) {
-      fprintf(stderr, "\rPass %d/%d: %3d%% ",
-	      prog->pub.completed_passes + prog->completed_extra_passes + 1,
-	      total_passes, percent_done);
-    } else {
-      fprintf(stderr, "\r %3d%% ", percent_done);
-    }
-    fflush(stderr);
-  }
-}
-
-
-GLOBAL(void)
-start_progress_monitor (j_common_ptr cinfo, cd_progress_ptr progress)
-{
-  /* Enable progress display, unless trace output is on */
-  if (cinfo->err->trace_level == 0) {
-    progress->pub.progress_monitor = progress_monitor;
-    progress->completed_extra_passes = 0;
-    progress->total_extra_passes = 0;
-    progress->percent_done = -1;
-    cinfo->progress = &progress->pub;
-  }
-}
-
-
-GLOBAL(void)
-end_progress_monitor (j_common_ptr cinfo)
-{
-  /* Clear away progress display */
-  if (cinfo->err->trace_level == 0) {
-    fprintf(stderr, "\r                \r");
-    fflush(stderr);
-  }
-}
-
-#endif
-
-
-/*
- * Case-insensitive matching of possibly-abbreviated keyword switches.
- * keyword is the constant keyword (must be lower case already),
- * minchars is length of minimum legal abbreviation.
- */
-
-GLOBAL(boolean)
-keymatch (char * arg, const char * keyword, int minchars)
-{
-  register int ca, ck;
-  register int nmatched = 0;
-
-  while ((ca = *arg++) != '\0') {
-    if ((ck = *keyword++) == '\0')
-      return FALSE;		/* arg longer than keyword, no good */
-    if (isupper(ca))		/* force arg to lcase (assume ck is already) */
-      ca = tolower(ca);
-    if (ca != ck)
-      return FALSE;		/* no good */
-    nmatched++;			/* count matched characters */
-  }
-  /* reached end of argument; fail if it's too short for unique abbrev */
-  if (nmatched < minchars)
-    return FALSE;
-  return TRUE;			/* A-OK */
-}
-
-
-/*
- * Routines to establish binary I/O mode for stdin and stdout.
- * Non-Unix systems often require some hacking to get out of text mode.
- */
-
-GLOBAL(FILE *)
-read_stdin (void)
-{
-  FILE * input_file = stdin;
-
-#ifdef USE_SETMODE		/* need to hack file mode? */
-  setmode(fileno(stdin), O_BINARY);
-#endif
-#ifdef USE_FDOPEN		/* need to re-open in binary mode? */
-  if ((input_file = fdopen(fileno(stdin), READ_BINARY)) == NULL) {
-    fprintf(stderr, "Cannot reopen stdin\n");
-    exit(EXIT_FAILURE);
-  }
-#endif
-  return input_file;
-}
-
-
-GLOBAL(FILE *)
-write_stdout (void)
-{
-  FILE * output_file = stdout;
-
-#ifdef USE_SETMODE		/* need to hack file mode? */
-  setmode(fileno(stdout), O_BINARY);
-#endif
-#ifdef USE_FDOPEN		/* need to re-open in binary mode? */
-  if ((output_file = fdopen(fileno(stdout), WRITE_BINARY)) == NULL) {
-    fprintf(stderr, "Cannot reopen stdout\n");
-    exit(EXIT_FAILURE);
-  }
-#endif
-  return output_file;
-}

Engine/lib/ljpeg/extras/cdjpeg.h

@@ -1,184 +0,0 @@
-/*
- * cdjpeg.h
- *
- * Copyright (C) 1994-1997, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains common declarations for the sample applications
- * cjpeg and djpeg.  It is NOT used by the core JPEG library.
- */
-
-#define JPEG_CJPEG_DJPEG	/* define proper options in jconfig.h */
-#define JPEG_INTERNAL_OPTIONS	/* cjpeg.c,djpeg.c need to see xxx_SUPPORTED */
-#include "jinclude.h"
-#include "jpeglib.h"
-#include "jerror.h"		/* get library error codes too */
-#include "cderror.h"		/* get application-specific error codes */
-
-
-/*
- * Object interface for cjpeg's source file decoding modules
- */
-
-typedef struct cjpeg_source_struct * cjpeg_source_ptr;
-
-struct cjpeg_source_struct {
-  JMETHOD(void, start_input, (j_compress_ptr cinfo,
-			      cjpeg_source_ptr sinfo));
-  JMETHOD(JDIMENSION, get_pixel_rows, (j_compress_ptr cinfo,
-				       cjpeg_source_ptr sinfo));
-  JMETHOD(void, finish_input, (j_compress_ptr cinfo,
-			       cjpeg_source_ptr sinfo));
-
-  FILE *input_file;
-
-  JSAMPARRAY buffer;
-  JDIMENSION buffer_height;
-};
-
-
-/*
- * Object interface for djpeg's output file encoding modules
- */
-
-typedef struct djpeg_dest_struct * djpeg_dest_ptr;
-
-struct djpeg_dest_struct {
-  /* start_output is called after jpeg_start_decompress finishes.
-   * The color map will be ready at this time, if one is needed.
-   */
-  JMETHOD(void, start_output, (j_decompress_ptr cinfo,
-			       djpeg_dest_ptr dinfo));
-  /* Emit the specified number of pixel rows from the buffer. */
-  JMETHOD(void, put_pixel_rows, (j_decompress_ptr cinfo,
-				 djpeg_dest_ptr dinfo,
-				 JDIMENSION rows_supplied));
-  /* Finish up at the end of the image. */
-  JMETHOD(void, finish_output, (j_decompress_ptr cinfo,
-				djpeg_dest_ptr dinfo));
-
-  /* Target file spec; filled in by djpeg.c after object is created. */
-  FILE * output_file;
-
-  /* Output pixel-row buffer.  Created by module init or start_output.
-   * Width is cinfo->output_width * cinfo->output_components;
-   * height is buffer_height.
-   */
-  JSAMPARRAY buffer;
-  JDIMENSION buffer_height;
-};
-
-
-/*
- * cjpeg/djpeg may need to perform extra passes to convert to or from
- * the source/destination file format.  The JPEG library does not know
- * about these passes, but we'd like them to be counted by the progress
- * monitor.  We use an expanded progress monitor object to hold the
- * additional pass count.
- */
-
-struct cdjpeg_progress_mgr {
-  struct jpeg_progress_mgr pub;	/* fields known to JPEG library */
-  int completed_extra_passes;	/* extra passes completed */
-  int total_extra_passes;	/* total extra */
-  /* last printed percentage stored here to avoid multiple printouts */
-  int percent_done;
-};
-
-typedef struct cdjpeg_progress_mgr * cd_progress_ptr;
-
-
-/* Short forms of external names for systems with brain-damaged linkers. */
-
-#ifdef NEED_SHORT_EXTERNAL_NAMES
-#define jinit_read_bmp		jIRdBMP
-#define jinit_write_bmp		jIWrBMP
-#define jinit_read_gif		jIRdGIF
-#define jinit_write_gif		jIWrGIF
-#define jinit_read_ppm		jIRdPPM
-#define jinit_write_ppm		jIWrPPM
-#define jinit_read_rle		jIRdRLE
-#define jinit_write_rle		jIWrRLE
-#define jinit_read_targa	jIRdTarga
-#define jinit_write_targa	jIWrTarga
-#define read_quant_tables	RdQTables
-#define read_scan_script	RdScnScript
-#define set_quant_slots		SetQSlots
-#define set_sample_factors	SetSFacts
-#define read_color_map		RdCMap
-#define enable_signal_catcher	EnSigCatcher
-#define start_progress_monitor	StProgMon
-#define end_progress_monitor	EnProgMon
-#define read_stdin		RdStdin
-#define write_stdout		WrStdout
-#endif /* NEED_SHORT_EXTERNAL_NAMES */
-
-/* Module selection routines for I/O modules. */
-
-EXTERN(cjpeg_source_ptr) jinit_read_bmp JPP((j_compress_ptr cinfo));
-EXTERN(djpeg_dest_ptr) jinit_write_bmp JPP((j_decompress_ptr cinfo,
-					    boolean is_os2));
-EXTERN(cjpeg_source_ptr) jinit_read_gif JPP((j_compress_ptr cinfo));
-EXTERN(djpeg_dest_ptr) jinit_write_gif JPP((j_decompress_ptr cinfo));
-EXTERN(cjpeg_source_ptr) jinit_read_ppm JPP((j_compress_ptr cinfo));
-EXTERN(djpeg_dest_ptr) jinit_write_ppm JPP((j_decompress_ptr cinfo));
-EXTERN(cjpeg_source_ptr) jinit_read_rle JPP((j_compress_ptr cinfo));
-EXTERN(djpeg_dest_ptr) jinit_write_rle JPP((j_decompress_ptr cinfo));
-EXTERN(cjpeg_source_ptr) jinit_read_targa JPP((j_compress_ptr cinfo));
-EXTERN(djpeg_dest_ptr) jinit_write_targa JPP((j_decompress_ptr cinfo));
-
-/* cjpeg support routines (in rdswitch.c) */
-
-EXTERN(boolean) read_quant_tables JPP((j_compress_ptr cinfo, char * filename,
-				    int scale_factor, boolean force_baseline));
-EXTERN(boolean) read_scan_script JPP((j_compress_ptr cinfo, char * filename));
-EXTERN(boolean) set_quant_slots JPP((j_compress_ptr cinfo, char *arg));
-EXTERN(boolean) set_sample_factors JPP((j_compress_ptr cinfo, char *arg));
-
-/* djpeg support routines (in rdcolmap.c) */
-
-EXTERN(void) read_color_map JPP((j_decompress_ptr cinfo, FILE * infile));
-
-/* common support routines (in cdjpeg.c) */
-
-EXTERN(void) enable_signal_catcher JPP((j_common_ptr cinfo));
-EXTERN(void) start_progress_monitor JPP((j_common_ptr cinfo,
-					 cd_progress_ptr progress));
-EXTERN(void) end_progress_monitor JPP((j_common_ptr cinfo));
-EXTERN(boolean) keymatch JPP((char * arg, const char * keyword, int minchars));
-EXTERN(FILE *) read_stdin JPP((void));
-EXTERN(FILE *) write_stdout JPP((void));
-
-/* miscellaneous useful macros */
-
-#ifdef DONT_USE_B_MODE		/* define mode parameters for fopen() */
-#define READ_BINARY	"r"
-#define WRITE_BINARY	"w"
-#else
-#ifdef VMS			/* VMS is very nonstandard */
-#define READ_BINARY	"rb", "ctx=stm"
-#define WRITE_BINARY	"wb", "ctx=stm"
-#else				/* standard ANSI-compliant case */
-#define READ_BINARY	"rb"
-#define WRITE_BINARY	"wb"
-#endif
-#endif
-
-#ifndef EXIT_FAILURE		/* define exit() codes if not provided */
-#define EXIT_FAILURE  1
-#endif
-#ifndef EXIT_SUCCESS
-#ifdef VMS
-#define EXIT_SUCCESS  1		/* VMS is very nonstandard */
-#else
-#define EXIT_SUCCESS  0
-#endif
-#endif
-#ifndef EXIT_WARNING
-#ifdef VMS
-#define EXIT_WARNING  1		/* VMS is very nonstandard */
-#else
-#define EXIT_WARNING  2
-#endif
-#endif

Engine/lib/ljpeg/extras/change.log

@@ -1,217 +0,0 @@
-CHANGE LOG for Independent JPEG Group's JPEG software
-
-
-Version 6b  27-Mar-1998
------------------------
-
-jpegtran has new features for lossless image transformations (rotation
-and flipping) as well as "lossless" reduction to grayscale.
-
-jpegtran now copies comments by default; it has a -copy switch to enable
-copying all APPn blocks as well, or to suppress comments.  (Formerly it
-always suppressed comments and APPn blocks.)  jpegtran now also preserves
-JFIF version and resolution information.
-
-New decompressor library feature: COM and APPn markers found in the input
-file can be saved in memory for later use by the application.  (Before,
-you had to code this up yourself with a custom marker processor.)
-
-There is an unused field "void * client_data" now in compress and decompress
-parameter structs; this may be useful in some applications.
-
-JFIF version number information is now saved by the decoder and accepted by
-the encoder.  jpegtran uses this to copy the source file's version number,
-to ensure "jpegtran -copy all" won't create bogus files that contain JFXX
-extensions but claim to be version 1.01.  Applications that generate their
-own JFXX extension markers also (finally) have a supported way to cause the
-encoder to emit JFIF version number 1.02.
-
-djpeg's trace mode reports JFIF 1.02 thumbnail images as such, rather
-than as unknown APP0 markers.
-
-In -verbose mode, djpeg and rdjpgcom will try to print the contents of
-APP12 markers as text.  Some digital cameras store useful text information
-in APP12 markers.
-
-Handling of truncated data streams is more robust: blocks beyond the one in
-which the error occurs will be output as uniform gray, or left unchanged
-if decoding a progressive JPEG.  The appearance no longer depends on the
-Huffman tables being used.
-
-Huffman tables are checked for validity much more carefully than before.
-
-To avoid the Unisys LZW patent, djpeg's GIF output capability has been
-changed to produce "uncompressed GIFs", and cjpeg's GIF input capability
-has been removed altogether.  We're not happy about it either, but there
-seems to be no good alternative.
-
-The configure script now supports building libjpeg as a shared library
-on many flavors of Unix (all the ones that GNU libtool knows how to
-build shared libraries for).  Use "./configure --enable-shared" to
-try this out.
-
-New jconfig file and makefiles for Microsoft Visual C++ and Developer Studio.
-Also, a jconfig file and a build script for Metrowerks CodeWarrior
-on Apple Macintosh.  makefile.dj has been updated for DJGPP v2, and there
-are miscellaneous other minor improvements in the makefiles.
-
-jmemmac.c now knows how to create temporary files following Mac System 7
-conventions.
-
-djpeg's -map switch is now able to read raw-format PPM files reliably.
-
-cjpeg -progressive -restart no longer generates any unnecessary DRI markers.
-
-Multiple calls to jpeg_simple_progression for a single JPEG object
-no longer leak memory.
-
-
-Version 6a  7-Feb-96
---------------------
-
-Library initialization sequence modified to detect version mismatches
-and struct field packing mismatches between library and calling application.
-This change requires applications to be recompiled, but does not require
-any application source code change.
-
-All routine declarations changed to the style "GLOBAL(type) name ...",
-that is, GLOBAL, LOCAL, METHODDEF, EXTERN are now macros taking the
-routine's return type as an argument.  This makes it possible to add
-Microsoft-style linkage keywords to all the routines by changing just
-these macros.  Note that any application code that was using these macros
-will have to be changed.
-
-DCT coefficient quantization tables are now stored in normal array order
-rather than zigzag order.  Application code that calls jpeg_add_quant_table,
-or otherwise manipulates quantization tables directly, will need to be
-changed.  If you need to make such code work with either older or newer
-versions of the library, a test like "#if JPEG_LIB_VERSION >= 61" is
-recommended.
-
-djpeg's trace capability now dumps DQT tables in natural order, not zigzag
-order.  This allows the trace output to be made into a "-qtables" file
-more easily.
-
-New system-dependent memory manager module for use on Apple Macintosh.
-
-Fix bug in cjpeg's -smooth option: last one or two scanlines would be
-duplicates of the prior line unless the image height mod 16 was 1 or 2.
-
-Repair minor problems in VMS, BCC, MC6 makefiles.
-
-New configure script based on latest GNU Autoconf.
-
-Correct the list of include files needed by MetroWerks C for ccommand().
-
-Numerous small documentation updates.
-
-
-Version 6  2-Aug-95
--------------------
-
-Progressive JPEG support: library can read and write full progressive JPEG
-files.  A "buffered image" mode supports incremental decoding for on-the-fly
-display of progressive images.  Simply recompiling an existing IJG-v5-based
-decoder with v6 should allow it to read progressive files, though of course
-without any special progressive display.
-
-New "jpegtran" application performs lossless transcoding between different
-JPEG formats; primarily, it can be used to convert baseline to progressive
-JPEG and vice versa.  In support of jpegtran, the library now allows lossless
-reading and writing of JPEG files as DCT coefficient arrays.  This ability
-may be of use in other applications.
-
-Notes for programmers:
-* We changed jpeg_start_decompress() to be able to suspend; this makes all
-decoding modes available to suspending-input applications.  However,
-existing applications that use suspending input will need to be changed
-to check the return value from jpeg_start_decompress().  You don't need to
-do anything if you don't use a suspending data source.
-* We changed the interface to the virtual array routines: access_virt_array
-routines now take a count of the number of rows to access this time.  The
-last parameter to request_virt_array routines is now interpreted as the
-maximum number of rows that may be accessed at once, but not necessarily
-the height of every access.
-
-
-Version 5b  15-Mar-95
----------------------
-
-Correct bugs with grayscale images having v_samp_factor > 1.
-
-jpeg_write_raw_data() now supports output suspension.
-
-Correct bugs in "configure" script for case of compiling in
-a directory other than the one containing the source files.
-
-Repair bug in jquant1.c: sometimes didn't use as many colors as it could.
-
-Borland C makefile and jconfig file work under either MS-DOS or OS/2.
-
-Miscellaneous improvements to documentation.
-
-
-Version 5a  7-Dec-94
---------------------
-
-Changed color conversion roundoff behavior so that grayscale values are
-represented exactly.  (This causes test image files to change.)
-
-Make ordered dither use 16x16 instead of 4x4 pattern for a small quality
-improvement.
-
-New configure script based on latest GNU Autoconf.
-Fix configure script to handle CFLAGS correctly.
-Rename *.auto files to *.cfg, so that configure script still works if
-file names have been truncated for DOS.
-
-Fix bug in rdbmp.c: didn't allow for extra data between header and image.
-
-Modify rdppm.c/wrppm.c to handle 2-byte raw PPM/PGM formats for 12-bit data.
-
-Fix several bugs in rdrle.c.
-
-NEED_SHORT_EXTERNAL_NAMES option was broken.
-
-Revise jerror.h/jerror.c for more flexibility in message table.
-
-Repair oversight in jmemname.c NO_MKTEMP case: file could be there
-but unreadable.
-
-
-Version 5  24-Sep-94
---------------------
-
-Version 5 represents a nearly complete redesign and rewrite of the IJG
-software.  Major user-visible changes include:
-  * Automatic configuration simplifies installation for most Unix systems.
-  * A range of speed vs. image quality tradeoffs are supported.
-    This includes resizing of an image during decompression: scaling down
-    by a factor of 1/2, 1/4, or 1/8 is handled very efficiently.
-  * New programs rdjpgcom and wrjpgcom allow insertion and extraction
-    of text comments in a JPEG file.
-
-The application programmer's interface to the library has changed completely.
-Notable improvements include:
-  * We have eliminated the use of callback routines for handling the
-    uncompressed image data.  The application now sees the library as a
-    set of routines that it calls to read or write image data on a
-    scanline-by-scanline basis.
-  * The application image data is represented in a conventional interleaved-
-    pixel format, rather than as a separate array for each color channel.
-    This can save a copying step in many programs.
-  * The handling of compressed data has been cleaned up: the application can
-    supply routines to source or sink the compressed data.  It is possible to
-    suspend processing on source/sink buffer overrun, although this is not
-    supported in all operating modes.
-  * All static state has been eliminated from the library, so that multiple
-    instances of compression or decompression can be active concurrently.
-  * JPEG abbreviated datastream formats are supported, ie, quantization and
-    Huffman tables can be stored separately from the image data.
-  * And not only that, but the documentation of the library has improved
-    considerably!
-
-
-The last widely used release before the version 5 rewrite was version 4A of
-18-Feb-93.  Change logs before that point have been discarded, since they
-are not of much interest after the rewrite.

Engine/lib/ljpeg/extras/cjpeg.1

@@ -1,292 +0,0 @@
-.TH CJPEG 1 "20 March 1998"
-.SH NAME
-cjpeg \- compress an image file to a JPEG file
-.SH SYNOPSIS
-.B cjpeg
-[
-.I options
-]
-[
-.I filename
-]
-.LP
-.SH DESCRIPTION
-.LP
-.B cjpeg
-compresses the named image file, or the standard input if no file is
-named, and produces a JPEG/JFIF file on the standard output.
-The currently supported input file formats are: PPM (PBMPLUS color
-format), PGM (PBMPLUS gray-scale format), BMP, Targa, and RLE (Utah Raster
-Toolkit format).  (RLE is supported only if the URT library is available.)
-.SH OPTIONS
-All switch names may be abbreviated; for example,
-.B \-grayscale
-may be written
-.B \-gray
-or
-.BR \-gr .
-Most of the "basic" switches can be abbreviated to as little as one letter.
-Upper and lower case are equivalent (thus
-.B \-BMP
-is the same as
-.BR \-bmp ).
-British spellings are also accepted (e.g.,
-.BR \-greyscale ),
-though for brevity these are not mentioned below.
-.PP
-The basic switches are:
-.TP
-.BI \-quality " N"
-Scale quantization tables to adjust image quality.  Quality is 0 (worst) to
-100 (best); default is 75.  (See below for more info.)
-.TP
-.B \-grayscale
-Create monochrome JPEG file from color input.  Be sure to use this switch when
-compressing a grayscale BMP file, because
-.B cjpeg
-isn't bright enough to notice whether a BMP file uses only shades of gray.
-By saying
-.BR \-grayscale ,
-you'll get a smaller JPEG file that takes less time to process.
-.TP
-.B \-optimize
-Perform optimization of entropy encoding parameters.  Without this, default
-encoding parameters are used.
-.B \-optimize
-usually makes the JPEG file a little smaller, but
-.B cjpeg
-runs somewhat slower and needs much more memory.  Image quality and speed of
-decompression are unaffected by
-.BR \-optimize .
-.TP
-.B \-progressive
-Create progressive JPEG file (see below).
-.TP
-.B \-targa
-Input file is Targa format.  Targa files that contain an "identification"
-field will not be automatically recognized by
-.BR cjpeg ;
-for such files you must specify
-.B \-targa
-to make
-.B cjpeg
-treat the input as Targa format.
-For most Targa files, you won't need this switch.
-.PP
-The
-.B \-quality
-switch lets you trade off compressed file size against quality of the
-reconstructed image: the higher the quality setting, the larger the JPEG file,
-and the closer the output image will be to the original input.  Normally you
-want to use the lowest quality setting (smallest file) that decompresses into
-something visually indistinguishable from the original image.  For this
-purpose the quality setting should be between 50 and 95; the default of 75 is
-often about right.  If you see defects at
-.B \-quality
-75, then go up 5 or 10 counts at a time until you are happy with the output
-image.  (The optimal setting will vary from one image to another.)
-.PP
-.B \-quality
-100 will generate a quantization table of all 1's, minimizing loss in the
-quantization step (but there is still information loss in subsampling, as well
-as roundoff error).  This setting is mainly of interest for experimental
-purposes.  Quality values above about 95 are
-.B not
-recommended for normal use; the compressed file size goes up dramatically for
-hardly any gain in output image quality.
-.PP
-In the other direction, quality values below 50 will produce very small files
-of low image quality.  Settings around 5 to 10 might be useful in preparing an
-index of a large image library, for example.  Try
-.B \-quality
-2 (or so) for some amusing Cubist effects.  (Note: quality
-values below about 25 generate 2-byte quantization tables, which are
-considered optional in the JPEG standard.
-.B cjpeg
-emits a warning message when you give such a quality value, because some
-other JPEG programs may be unable to decode the resulting file.  Use
-.B \-baseline
-if you need to ensure compatibility at low quality values.)
-.PP
-The
-.B \-progressive
-switch creates a "progressive JPEG" file.  In this type of JPEG file, the data
-is stored in multiple scans of increasing quality.  If the file is being
-transmitted over a slow communications link, the decoder can use the first
-scan to display a low-quality image very quickly, and can then improve the
-display with each subsequent scan.  The final image is exactly equivalent to a
-standard JPEG file of the same quality setting, and the total file size is
-about the same --- often a little smaller.
-.B Caution:
-progressive JPEG is not yet widely implemented, so many decoders will be
-unable to view a progressive JPEG file at all.
-.PP
-Switches for advanced users:
-.TP
-.B \-dct int
-Use integer DCT method (default).
-.TP
-.B \-dct fast
-Use fast integer DCT (less accurate).
-.TP
-.B \-dct float
-Use floating-point DCT method.
-The float method is very slightly more accurate than the int method, but is
-much slower unless your machine has very fast floating-point hardware.  Also
-note that results of the floating-point method may vary slightly across
-machines, while the integer methods should give the same results everywhere.
-The fast integer method is much less accurate than the other two.
-.TP
-.BI \-restart " N"
-Emit a JPEG restart marker every N MCU rows, or every N MCU blocks if "B" is
-attached to the number.
-.B \-restart 0
-(the default) means no restart markers.
-.TP
-.BI \-smooth " N"
-Smooth the input image to eliminate dithering noise.  N, ranging from 1 to
-100, indicates the strength of smoothing.  0 (the default) means no smoothing.
-.TP
-.BI \-maxmemory " N"
-Set limit for amount of memory to use in processing large images.  Value is
-in thousands of bytes, or millions of bytes if "M" is attached to the
-number.  For example,
-.B \-max 4m
-selects 4000000 bytes.  If more space is needed, temporary files will be used.
-.TP
-.BI \-outfile " name"
-Send output image to the named file, not to standard output.
-.TP
-.B \-verbose
-Enable debug printout.  More
-.BR \-v 's
-give more output.  Also, version information is printed at startup.
-.TP
-.B \-debug
-Same as
-.BR \-verbose .
-.PP
-The
-.B \-restart
-option inserts extra markers that allow a JPEG decoder to resynchronize after
-a transmission error.  Without restart markers, any damage to a compressed
-file will usually ruin the image from the point of the error to the end of the
-image; with restart markers, the damage is usually confined to the portion of
-the image up to the next restart marker.  Of course, the restart markers
-occupy extra space.  We recommend
-.B \-restart 1
-for images that will be transmitted across unreliable networks such as Usenet.
-.PP
-The
-.B \-smooth
-option filters the input to eliminate fine-scale noise.  This is often useful
-when converting dithered images to JPEG: a moderate smoothing factor of 10 to
-50 gets rid of dithering patterns in the input file, resulting in a smaller
-JPEG file and a better-looking image.  Too large a smoothing factor will
-visibly blur the image, however.
-.PP
-Switches for wizards:
-.TP
-.B \-baseline
-Force baseline-compatible quantization tables to be generated.  This clamps
-quantization values to 8 bits even at low quality settings.  (This switch is
-poorly named, since it does not ensure that the output is actually baseline
-JPEG.  For example, you can use
-.B \-baseline
-and
-.B \-progressive
-together.)
-.TP
-.BI \-qtables " file"
-Use the quantization tables given in the specified text file.
-.TP
-.BI \-qslots " N[,...]"
-Select which quantization table to use for each color component.
-.TP
-.BI \-sample " HxV[,...]"
-Set JPEG sampling factors for each color component.
-.TP
-.BI \-scans " file"
-Use the scan script given in the specified text file.
-.PP
-The "wizard" switches are intended for experimentation with JPEG.  If you
-don't know what you are doing, \fBdon't use them\fR.  These switches are
-documented further in the file wizard.doc.
-.SH EXAMPLES
-.LP
-This example compresses the PPM file foo.ppm with a quality factor of
-60 and saves the output as foo.jpg:
-.IP
-.B cjpeg \-quality
-.I 60 foo.ppm
-.B >
-.I foo.jpg
-.SH HINTS
-Color GIF files are not the ideal input for JPEG; JPEG is really intended for
-compressing full-color (24-bit) images.  In particular, don't try to convert
-cartoons, line drawings, and other images that have only a few distinct
-colors.  GIF works great on these, JPEG does not.  If you want to convert a
-GIF to JPEG, you should experiment with
-.BR cjpeg 's
-.B \-quality
-and
-.B \-smooth
-options to get a satisfactory conversion.
-.B \-smooth 10
-or so is often helpful.
-.PP
-Avoid running an image through a series of JPEG compression/decompression
-cycles.  Image quality loss will accumulate; after ten or so cycles the image
-may be noticeably worse than it was after one cycle.  It's best to use a
-lossless format while manipulating an image, then convert to JPEG format when
-you are ready to file the image away.
-.PP
-The
-.B \-optimize
-option to
-.B cjpeg
-is worth using when you are making a "final" version for posting or archiving.
-It's also a win when you are using low quality settings to make very small
-JPEG files; the percentage improvement is often a lot more than it is on
-larger files.  (At present,
-.B \-optimize
-mode is always selected when generating progressive JPEG files.)
-.SH ENVIRONMENT
-.TP
-.B JPEGMEM
-If this environment variable is set, its value is the default memory limit.
-The value is specified as described for the
-.B \-maxmemory
-switch.
-.B JPEGMEM
-overrides the default value specified when the program was compiled, and
-itself is overridden by an explicit
-.BR \-maxmemory .
-.SH SEE ALSO
-.BR djpeg (1),
-.BR jpegtran (1),
-.BR rdjpgcom (1),
-.BR wrjpgcom (1)
-.br
-.BR ppm (5),
-.BR pgm (5)
-.br
-Wallace, Gregory K.  "The JPEG Still Picture Compression Standard",
-Communications of the ACM, April 1991 (vol. 34, no. 4), pp. 30-44.
-.SH AUTHOR
-Independent JPEG Group
-.SH BUGS
-Arithmetic coding is not supported for legal reasons.
-.PP
-GIF input files are no longer supported, to avoid the Unisys LZW patent.
-Use a Unisys-licensed program if you need to read a GIF file.  (Conversion
-of GIF files to JPEG is usually a bad idea anyway.)
-.PP
-Not all variants of BMP and Targa file formats are supported.
-.PP
-The
-.B \-targa
-switch is not a bug, it's a feature.  (It would be a bug if the Targa format
-designers had not been clueless.)
-.PP
-Still not as fast as we'd like.

Engine/lib/ljpeg/extras/cjpeg.c

@@ -1,606 +0,0 @@
-/*
- * cjpeg.c
- *
- * Copyright (C) 1991-1998, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains a command-line user interface for the JPEG compressor.
- * It should work on any system with Unix- or MS-DOS-style command lines.
- *
- * Two different command line styles are permitted, depending on the
- * compile-time switch TWO_FILE_COMMANDLINE:
- *	cjpeg [options]  inputfile outputfile
- *	cjpeg [options]  [inputfile]
- * In the second style, output is always to standard output, which you'd
- * normally redirect to a file or pipe to some other program.  Input is
- * either from a named file or from standard input (typically redirected).
- * The second style is convenient on Unix but is unhelpful on systems that
- * don't support pipes.  Also, you MUST use the first style if your system
- * doesn't do binary I/O to stdin/stdout.
- * To simplify script writing, the "-outfile" switch is provided.  The syntax
- *	cjpeg [options]  -outfile outputfile  inputfile
- * works regardless of which command line style is used.
- */
-
-#include "cdjpeg.h"		/* Common decls for cjpeg/djpeg applications */
-#include "jversion.h"		/* for version message */
-
-#ifdef USE_CCOMMAND		/* command-line reader for Macintosh */
-#ifdef __MWERKS__
-#include <SIOUX.h>              /* Metrowerks needs this */
-#include <console.h>		/* ... and this */
-#endif
-#ifdef THINK_C
-#include <console.h>		/* Think declares it here */
-#endif
-#endif
-
-
-/* Create the add-on message string table. */
-
-#define JMESSAGE(code,string)	string ,
-
-static const char * const cdjpeg_message_table[] = {
-#include "cderror.h"
-  NULL
-};
-
-
-/*
- * This routine determines what format the input file is,
- * and selects the appropriate input-reading module.
- *
- * To determine which family of input formats the file belongs to,
- * we may look only at the first byte of the file, since C does not
- * guarantee that more than one character can be pushed back with ungetc.
- * Looking at additional bytes would require one of these approaches:
- *     1) assume we can fseek() the input file (fails for piped input);
- *     2) assume we can push back more than one character (works in
- *        some C implementations, but unportable);
- *     3) provide our own buffering (breaks input readers that want to use
- *        stdio directly, such as the RLE library);
- * or  4) don't put back the data, and modify the input_init methods to assume
- *        they start reading after the start of file (also breaks RLE library).
- * #1 is attractive for MS-DOS but is untenable on Unix.
- *
- * The most portable solution for file types that can't be identified by their
- * first byte is to make the user tell us what they are.  This is also the
- * only approach for "raw" file types that contain only arbitrary values.
- * We presently apply this method for Targa files.  Most of the time Targa
- * files start with 0x00, so we recognize that case.  Potentially, however,
- * a Targa file could start with any byte value (byte 0 is the length of the
- * seldom-used ID field), so we provide a switch to force Targa input mode.
- */
-
-static boolean is_targa;	/* records user -targa switch */
-
-
-LOCAL(cjpeg_source_ptr)
-select_file_type (j_compress_ptr cinfo, FILE * infile)
-{
-  int c;
-
-  if (is_targa) {
-#ifdef TARGA_SUPPORTED
-    return jinit_read_targa(cinfo);
-#else
-    ERREXIT(cinfo, JERR_TGA_NOTCOMP);
-#endif
-  }
-
-  if ((c = getc(infile)) == EOF)
-    ERREXIT(cinfo, JERR_INPUT_EMPTY);
-  if (ungetc(c, infile) == EOF)
-    ERREXIT(cinfo, JERR_UNGETC_FAILED);
-
-  switch (c) {
-#ifdef BMP_SUPPORTED
-  case 'B':
-    return jinit_read_bmp(cinfo);
-#endif
-#ifdef GIF_SUPPORTED
-  case 'G':
-    return jinit_read_gif(cinfo);
-#endif
-#ifdef PPM_SUPPORTED
-  case 'P':
-    return jinit_read_ppm(cinfo);
-#endif
-#ifdef RLE_SUPPORTED
-  case 'R':
-    return jinit_read_rle(cinfo);
-#endif
-#ifdef TARGA_SUPPORTED
-  case 0x00:
-    return jinit_read_targa(cinfo);
-#endif
-  default:
-    ERREXIT(cinfo, JERR_UNKNOWN_FORMAT);
-    break;
-  }
-
-  return NULL;			/* suppress compiler warnings */
-}
-
-
-/*
- * Argument-parsing code.
- * The switch parser is designed to be useful with DOS-style command line
- * syntax, ie, intermixed switches and file names, where only the switches
- * to the left of a given file name affect processing of that file.
- * The main program in this file doesn't actually use this capability...
- */
-
-
-static const char * progname;	/* program name for error messages */
-static char * outfilename;	/* for -outfile switch */
-
-
-LOCAL(void)
-usage (void)
-/* complain about bad command line */
-{
-  fprintf(stderr, "usage: %s [switches] ", progname);
-#ifdef TWO_FILE_COMMANDLINE
-  fprintf(stderr, "inputfile outputfile\n");
-#else
-  fprintf(stderr, "[inputfile]\n");
-#endif
-
-  fprintf(stderr, "Switches (names may be abbreviated):\n");
-  fprintf(stderr, "  -quality N     Compression quality (0..100; 5-95 is useful range)\n");
-  fprintf(stderr, "  -grayscale     Create monochrome JPEG file\n");
-#ifdef ENTROPY_OPT_SUPPORTED
-  fprintf(stderr, "  -optimize      Optimize Huffman table (smaller file, but slow compression)\n");
-#endif
-#ifdef C_PROGRESSIVE_SUPPORTED
-  fprintf(stderr, "  -progressive   Create progressive JPEG file\n");
-#endif
-#ifdef TARGA_SUPPORTED
-  fprintf(stderr, "  -targa         Input file is Targa format (usually not needed)\n");
-#endif
-  fprintf(stderr, "Switches for advanced users:\n");
-#ifdef DCT_ISLOW_SUPPORTED
-  fprintf(stderr, "  -dct int       Use integer DCT method%s\n",
-	  (JDCT_DEFAULT == JDCT_ISLOW ? " (default)" : ""));
-#endif
-#ifdef DCT_IFAST_SUPPORTED
-  fprintf(stderr, "  -dct fast      Use fast integer DCT (less accurate)%s\n",
-	  (JDCT_DEFAULT == JDCT_IFAST ? " (default)" : ""));
-#endif
-#ifdef DCT_FLOAT_SUPPORTED
-  fprintf(stderr, "  -dct float     Use floating-point DCT method%s\n",
-	  (JDCT_DEFAULT == JDCT_FLOAT ? " (default)" : ""));
-#endif
-  fprintf(stderr, "  -restart N     Set restart interval in rows, or in blocks with B\n");
-#ifdef INPUT_SMOOTHING_SUPPORTED
-  fprintf(stderr, "  -smooth N      Smooth dithered input (N=1..100 is strength)\n");
-#endif
-  fprintf(stderr, "  -maxmemory N   Maximum memory to use (in kbytes)\n");
-  fprintf(stderr, "  -outfile name  Specify name for output file\n");
-  fprintf(stderr, "  -verbose  or  -debug   Emit debug output\n");
-  fprintf(stderr, "Switches for wizards:\n");
-#ifdef C_ARITH_CODING_SUPPORTED
-  fprintf(stderr, "  -arithmetic    Use arithmetic coding\n");
-#endif
-  fprintf(stderr, "  -baseline      Force baseline quantization tables\n");
-  fprintf(stderr, "  -qtables file  Use quantization tables given in file\n");
-  fprintf(stderr, "  -qslots N[,...]    Set component quantization tables\n");
-  fprintf(stderr, "  -sample HxV[,...]  Set component sampling factors\n");
-#ifdef C_MULTISCAN_FILES_SUPPORTED
-  fprintf(stderr, "  -scans file    Create multi-scan JPEG per script file\n");
-#endif
-  exit(EXIT_FAILURE);
-}
-
-
-LOCAL(int)
-parse_switches (j_compress_ptr cinfo, int argc, char **argv,
-		int last_file_arg_seen, boolean for_real)
-/* Parse optional switches.
- * Returns argv[] index of first file-name argument (== argc if none).
- * Any file names with indexes <= last_file_arg_seen are ignored;
- * they have presumably been processed in a previous iteration.
- * (Pass 0 for last_file_arg_seen on the first or only iteration.)
- * for_real is FALSE on the first (dummy) pass; we may skip any expensive
- * processing.
- */
-{
-  int argn;
-  char * arg;
-  int quality;			/* -quality parameter */
-  int q_scale_factor;		/* scaling percentage for -qtables */
-  boolean force_baseline;
-  boolean simple_progressive;
-  char * qtablefile = NULL;	/* saves -qtables filename if any */
-  char * qslotsarg = NULL;	/* saves -qslots parm if any */
-  char * samplearg = NULL;	/* saves -sample parm if any */
-  char * scansarg = NULL;	/* saves -scans parm if any */
-
-  /* Set up default JPEG parameters. */
-  /* Note that default -quality level need not, and does not,
-   * match the default scaling for an explicit -qtables argument.
-   */
-  quality = 75;			/* default -quality value */
-  q_scale_factor = 100;		/* default to no scaling for -qtables */
-  force_baseline = FALSE;	/* by default, allow 16-bit quantizers */
-  simple_progressive = FALSE;
-  is_targa = FALSE;
-  outfilename = NULL;
-  cinfo->err->trace_level = 0;
-
-  /* Scan command line options, adjust parameters */
-
-  for (argn = 1; argn < argc; argn++) {
-    arg = argv[argn];
-    if (*arg != '-') {
-      /* Not a switch, must be a file name argument */
-      if (argn <= last_file_arg_seen) {
-	outfilename = NULL;	/* -outfile applies to just one input file */
-	continue;		/* ignore this name if previously processed */
-      }
-      break;			/* else done parsing switches */
-    }
-    arg++;			/* advance past switch marker character */
-
-    if (keymatch(arg, "arithmetic", 1)) {
-      /* Use arithmetic coding. */
-#ifdef C_ARITH_CODING_SUPPORTED
-      cinfo->arith_code = TRUE;
-#else
-      fprintf(stderr, "%s: sorry, arithmetic coding not supported\n",
-	      progname);
-      exit(EXIT_FAILURE);
-#endif
-
-    } else if (keymatch(arg, "baseline", 1)) {
-      /* Force baseline-compatible output (8-bit quantizer values). */
-      force_baseline = TRUE;
-
-    } else if (keymatch(arg, "dct", 2)) {
-      /* Select DCT algorithm. */
-      if (++argn >= argc)	/* advance to next argument */
-	usage();
-      if (keymatch(argv[argn], "int", 1)) {
-	cinfo->dct_method = JDCT_ISLOW;
-      } else if (keymatch(argv[argn], "fast", 2)) {
-	cinfo->dct_method = JDCT_IFAST;
-      } else if (keymatch(argv[argn], "float", 2)) {
-	cinfo->dct_method = JDCT_FLOAT;
-      } else
-	usage();
-
-    } else if (keymatch(arg, "debug", 1) || keymatch(arg, "verbose", 1)) {
-      /* Enable debug printouts. */
-      /* On first -d, print version identification */
-      static boolean printed_version = FALSE;
-
-      if (! printed_version) {
-	fprintf(stderr, "Independent JPEG Group's CJPEG, version %s\n%s\n",
-		JVERSION, JCOPYRIGHT);
-	printed_version = TRUE;
-      }
-      cinfo->err->trace_level++;
-
-    } else if (keymatch(arg, "grayscale", 2) || keymatch(arg, "greyscale",2)) {
-      /* Force a monochrome JPEG file to be generated. */
-      jpeg_set_colorspace(cinfo, JCS_GRAYSCALE);
-
-    } else if (keymatch(arg, "maxmemory", 3)) {
-      /* Maximum memory in Kb (or Mb with 'm'). */
-      long lval;
-      char ch = 'x';
-
-      if (++argn >= argc)	/* advance to next argument */
-	usage();
-      if (sscanf(argv[argn], "%ld%c", &lval, &ch) < 1)
-	usage();
-      if (ch == 'm' || ch == 'M')
-	lval *= 1000L;
-      cinfo->mem->max_memory_to_use = lval * 1000L;
-
-    } else if (keymatch(arg, "optimize", 1) || keymatch(arg, "optimise", 1)) {
-      /* Enable entropy parm optimization. */
-#ifdef ENTROPY_OPT_SUPPORTED
-      cinfo->optimize_coding = TRUE;
-#else
-      fprintf(stderr, "%s: sorry, entropy optimization was not compiled\n",
-	      progname);
-      exit(EXIT_FAILURE);
-#endif
-
-    } else if (keymatch(arg, "outfile", 4)) {
-      /* Set output file name. */
-      if (++argn >= argc)	/* advance to next argument */
-	usage();
-      outfilename = argv[argn];	/* save it away for later use */
-
-    } else if (keymatch(arg, "progressive", 1)) {
-      /* Select simple progressive mode. */
-#ifdef C_PROGRESSIVE_SUPPORTED
-      simple_progressive = TRUE;
-      /* We must postpone execution until num_components is known. */
-#else
-      fprintf(stderr, "%s: sorry, progressive output was not compiled\n",
-	      progname);
-      exit(EXIT_FAILURE);
-#endif
-
-    } else if (keymatch(arg, "quality", 1)) {
-      /* Quality factor (quantization table scaling factor). */
-      if (++argn >= argc)	/* advance to next argument */
-	usage();
-      if (sscanf(argv[argn], "%d", &quality) != 1)
-	usage();
-      /* Change scale factor in case -qtables is present. */
-      q_scale_factor = jpeg_quality_scaling(quality);
-
-    } else if (keymatch(arg, "qslots", 2)) {
-      /* Quantization table slot numbers. */
-      if (++argn >= argc)	/* advance to next argument */
-	usage();
-      qslotsarg = argv[argn];
-      /* Must delay setting qslots until after we have processed any
-       * colorspace-determining switches, since jpeg_set_colorspace sets
-       * default quant table numbers.
-       */
-
-    } else if (keymatch(arg, "qtables", 2)) {
-      /* Quantization tables fetched from file. */
-      if (++argn >= argc)	/* advance to next argument */
-	usage();
-      qtablefile = argv[argn];
-      /* We postpone actually reading the file in case -quality comes later. */
-
-    } else if (keymatch(arg, "restart", 1)) {
-      /* Restart interval in MCU rows (or in MCUs with 'b'). */
-      long lval;
-      char ch = 'x';
-
-      if (++argn >= argc)	/* advance to next argument */
-	usage();
-      if (sscanf(argv[argn], "%ld%c", &lval, &ch) < 1)
-	usage();
-      if (lval < 0 || lval > 65535L)
-	usage();
-      if (ch == 'b' || ch == 'B') {
-	cinfo->restart_interval = (unsigned int) lval;
-	cinfo->restart_in_rows = 0; /* else prior '-restart n' overrides me */
-      } else {
-	cinfo->restart_in_rows = (int) lval;
-	/* restart_interval will be computed during startup */
-      }
-
-    } else if (keymatch(arg, "sample", 2)) {
-      /* Set sampling factors. */
-      if (++argn >= argc)	/* advance to next argument */
-	usage();
-      samplearg = argv[argn];
-      /* Must delay setting sample factors until after we have processed any
-       * colorspace-determining switches, since jpeg_set_colorspace sets
-       * default sampling factors.
-       */
-
-    } else if (keymatch(arg, "scans", 2)) {
-      /* Set scan script. */
-#ifdef C_MULTISCAN_FILES_SUPPORTED
-      if (++argn >= argc)	/* advance to next argument */
-	usage();
-      scansarg = argv[argn];
-      /* We must postpone reading the file in case -progressive appears. */
-#else
-      fprintf(stderr, "%s: sorry, multi-scan output was not compiled\n",
-	      progname);
-      exit(EXIT_FAILURE);
-#endif
-
-    } else if (keymatch(arg, "smooth", 2)) {
-      /* Set input smoothing factor. */
-      int val;
-
-      if (++argn >= argc)	/* advance to next argument */
-	usage();
-      if (sscanf(argv[argn], "%d", &val) != 1)
-	usage();
-      if (val < 0 || val > 100)
-	usage();
-      cinfo->smoothing_factor = val;
-
-    } else if (keymatch(arg, "targa", 1)) {
-      /* Input file is Targa format. */
-      is_targa = TRUE;
-
-    } else {
-      usage();			/* bogus switch */
-    }
-  }
-
-  /* Post-switch-scanning cleanup */
-
-  if (for_real) {
-
-    /* Set quantization tables for selected quality. */
-    /* Some or all may be overridden if -qtables is present. */
-    jpeg_set_quality(cinfo, quality, force_baseline);
-
-    if (qtablefile != NULL)	/* process -qtables if it was present */
-      if (! read_quant_tables(cinfo, qtablefile,
-			      q_scale_factor, force_baseline))
-	usage();
-
-    if (qslotsarg != NULL)	/* process -qslots if it was present */
-      if (! set_quant_slots(cinfo, qslotsarg))
-	usage();
-
-    if (samplearg != NULL)	/* process -sample if it was present */
-      if (! set_sample_factors(cinfo, samplearg))
-	usage();
-
-#ifdef C_PROGRESSIVE_SUPPORTED
-    if (simple_progressive)	/* process -progressive; -scans can override */
-      jpeg_simple_progression(cinfo);
-#endif
-
-#ifdef C_MULTISCAN_FILES_SUPPORTED
-    if (scansarg != NULL)	/* process -scans if it was present */
-      if (! read_scan_script(cinfo, scansarg))
-	usage();
-#endif
-  }
-
-  return argn;			/* return index of next arg (file name) */
-}
-
-
-/*
- * The main program.
- */
-
-int
-main (int argc, char **argv)
-{
-  struct jpeg_compress_struct cinfo;
-  struct jpeg_error_mgr jerr;
-#ifdef PROGRESS_REPORT
-  struct cdjpeg_progress_mgr progress;
-#endif
-  int file_index;
-  cjpeg_source_ptr src_mgr;
-  FILE * input_file;
-  FILE * output_file;
-  JDIMENSION num_scanlines;
-
-  /* On Mac, fetch a command line. */
-#ifdef USE_CCOMMAND
-  argc = ccommand(&argv);
-#endif
-
-  progname = argv[0];
-  if (progname == NULL || progname[0] == 0)
-    progname = "cjpeg";		/* in case C library doesn't provide it */
-
-  /* Initialize the JPEG compression object with default error handling. */
-  cinfo.err = jpeg_std_error(&jerr);
-  jpeg_create_compress(&cinfo);
-  /* Add some application-specific error messages (from cderror.h) */
-  jerr.addon_message_table = cdjpeg_message_table;
-  jerr.first_addon_message = JMSG_FIRSTADDONCODE;
-  jerr.last_addon_message = JMSG_LASTADDONCODE;
-
-  /* Now safe to enable signal catcher. */
-#ifdef NEED_SIGNAL_CATCHER
-  enable_signal_catcher((j_common_ptr) &cinfo);
-#endif
-
-  /* Initialize JPEG parameters.
-   * Much of this may be overridden later.
-   * In particular, we don't yet know the input file's color space,
-   * but we need to provide some value for jpeg_set_defaults() to work.
-   */
-
-  cinfo.in_color_space = JCS_RGB; /* arbitrary guess */
-  jpeg_set_defaults(&cinfo);
-
-  /* Scan command line to find file names.
-   * It is convenient to use just one switch-parsing routine, but the switch
-   * values read here are ignored; we will rescan the switches after opening
-   * the input file.
-   */
-
-  file_index = parse_switches(&cinfo, argc, argv, 0, FALSE);
-
-#ifdef TWO_FILE_COMMANDLINE
-  /* Must have either -outfile switch or explicit output file name */
-  if (outfilename == NULL) {
-    if (file_index != argc-2) {
-      fprintf(stderr, "%s: must name one input and one output file\n",
-	      progname);
-      usage();
-    }
-    outfilename = argv[file_index+1];
-  } else {
-    if (file_index != argc-1) {
-      fprintf(stderr, "%s: must name one input and one output file\n",
-	      progname);
-      usage();
-    }
-  }
-#else
-  /* Unix style: expect zero or one file name */
-  if (file_index < argc-1) {
-    fprintf(stderr, "%s: only one input file\n", progname);
-    usage();
-  }
-#endif /* TWO_FILE_COMMANDLINE */
-
-  /* Open the input file. */
-  if (file_index < argc) {
-    if ((input_file = fopen(argv[file_index], READ_BINARY)) == NULL) {
-      fprintf(stderr, "%s: can't open %s\n", progname, argv[file_index]);
-      exit(EXIT_FAILURE);
-    }
-  } else {
-    /* default input file is stdin */
-    input_file = read_stdin();
-  }
-
-  /* Open the output file. */
-  if (outfilename != NULL) {
-    if ((output_file = fopen(outfilename, WRITE_BINARY)) == NULL) {
-      fprintf(stderr, "%s: can't open %s\n", progname, outfilename);
-      exit(EXIT_FAILURE);
-    }
-  } else {
-    /* default output file is stdout */
-    output_file = write_stdout();
-  }
-
-#ifdef PROGRESS_REPORT
-  start_progress_monitor((j_common_ptr) &cinfo, &progress);
-#endif
-
-  /* Figure out the input file format, and set up to read it. */
-  src_mgr = select_file_type(&cinfo, input_file);
-  src_mgr->input_file = input_file;
-
-  /* Read the input file header to obtain file size & colorspace. */
-  (*src_mgr->start_input) (&cinfo, src_mgr);
-
-  /* Now that we know input colorspace, fix colorspace-dependent defaults */
-  jpeg_default_colorspace(&cinfo);
-
-  /* Adjust default compression parameters by re-parsing the options */
-  file_index = parse_switches(&cinfo, argc, argv, 0, TRUE);
-
-  /* Specify data destination for compression */
-  jpeg_stdio_dest(&cinfo, output_file);
-
-  /* Start compressor */
-  jpeg_start_compress(&cinfo, TRUE);
-
-  /* Process data */
-  while (cinfo.next_scanline < cinfo.image_height) {
-    num_scanlines = (*src_mgr->get_pixel_rows) (&cinfo, src_mgr);
-    (void) jpeg_write_scanlines(&cinfo, src_mgr->buffer, num_scanlines);
-  }
-
-  /* Finish compression and release memory */
-  (*src_mgr->finish_input) (&cinfo, src_mgr);
-  jpeg_finish_compress(&cinfo);
-  jpeg_destroy_compress(&cinfo);
-
-  /* Close files, if we opened them */
-  if (input_file != stdin)
-    fclose(input_file);
-  if (output_file != stdout)
-    fclose(output_file);
-
-#ifdef PROGRESS_REPORT
-  end_progress_monitor((j_common_ptr) &cinfo);
-#endif
-
-  /* All done. */
-  exit(jerr.num_warnings ? EXIT_WARNING : EXIT_SUCCESS);
-  return 0;			/* suppress no-return-value warnings */
-}

Engine/lib/ljpeg/extras/ckconfig.c

@@ -1,402 +0,0 @@
-/*
- * ckconfig.c
- *
- * Copyright (C) 1991-1994, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- */
-
-/*
- * This program is intended to help you determine how to configure the JPEG
- * software for installation on a particular system.  The idea is to try to
- * compile and execute this program.  If your compiler fails to compile the
- * program, make changes as indicated in the comments below.  Once you can
- * compile the program, run it, and it will produce a "jconfig.h" file for
- * your system.
- *
- * As a general rule, each time you try to compile this program,
- * pay attention only to the *first* error message you get from the compiler.
- * Many C compilers will issue lots of spurious error messages once they
- * have gotten confused.  Go to the line indicated in the first error message,
- * and read the comments preceding that line to see what to change.
- *
- * Almost all of the edits you may need to make to this program consist of
- * changing a line that reads "#define SOME_SYMBOL" to "#undef SOME_SYMBOL",
- * or vice versa.  This is called defining or undefining that symbol.
- */
-
-
-/* First we must see if your system has the include files we need.
- * We start out with the assumption that your system has all the ANSI-standard
- * include files.  If you get any error trying to include one of these files,
- * undefine the corresponding HAVE_xxx symbol.
- */
-
-#define HAVE_STDDEF_H		/* replace 'define' by 'undef' if error here */
-#ifdef HAVE_STDDEF_H		/* next line will be skipped if you undef... */
-#include <stddef.h>
-#endif
-
-#define HAVE_STDLIB_H		/* same thing for stdlib.h */
-#ifdef HAVE_STDLIB_H
-#include <stdlib.h>
-#endif
-
-#include <stdio.h>		/* If you ain't got this, you ain't got C. */
-
-/* We have to see if your string functions are defined by
- * strings.h (old BSD convention) or string.h (everybody else).
- * We try the non-BSD convention first; define NEED_BSD_STRINGS
- * if the compiler says it can't find string.h.
- */
-
-#undef NEED_BSD_STRINGS
-
-#ifdef NEED_BSD_STRINGS
-#include <strings.h>
-#else
-#include <string.h>
-#endif
-
-/* On some systems (especially older Unix machines), type size_t is
- * defined only in the include file <sys/types.h>.  If you get a failure
- * on the size_t test below, try defining NEED_SYS_TYPES_H.
- */
-
-#undef NEED_SYS_TYPES_H		/* start by assuming we don't need it */
-#ifdef NEED_SYS_TYPES_H
-#include <sys/types.h>
-#endif
-
-
-/* Usually type size_t is defined in one of the include files we've included
- * above.  If not, you'll get an error on the "typedef size_t my_size_t;" line.
- * In that case, first try defining NEED_SYS_TYPES_H just above.
- * If that doesn't work, you'll have to search through your system library
- * to figure out which include file defines "size_t".  Look for a line that
- * says "typedef something-or-other size_t;".  Then, change the line below
- * that says "#include <someincludefile.h>" to instead include the file
- * you found size_t in, and define NEED_SPECIAL_INCLUDE.  If you can't find
- * type size_t anywhere, try replacing "#include <someincludefile.h>" with
- * "typedef unsigned int size_t;".
- */
-
-#undef NEED_SPECIAL_INCLUDE	/* assume we DON'T need it, for starters */
-
-#ifdef NEED_SPECIAL_INCLUDE
-#include <someincludefile.h>
-#endif
-
-typedef size_t my_size_t;	/* The payoff: do we have size_t now? */
-
-
-/* The next question is whether your compiler supports ANSI-style function
- * prototypes.  You need to know this in order to choose between using
- * makefile.ansi and using makefile.unix.
- * The #define line below is set to assume you have ANSI function prototypes.
- * If you get an error in this group of lines, undefine HAVE_PROTOTYPES.
- */
-
-#define HAVE_PROTOTYPES
-
-#ifdef HAVE_PROTOTYPES
-int testfunction (int arg1, int * arg2); /* check prototypes */
-
-struct methods_struct {		/* check method-pointer declarations */
-  int (*error_exit) (char *msgtext);
-  int (*trace_message) (char *msgtext);
-  int (*another_method) (void);
-};
-
-int testfunction (int arg1, int * arg2) /* check definitions */
-{
-  return arg2[arg1];
-}
-
-int test2function (void)	/* check void arg list */
-{
-  return 0;
-}
-#endif
-
-
-/* Now we want to find out if your compiler knows what "unsigned char" means.
- * If you get an error on the "unsigned char un_char;" line,
- * then undefine HAVE_UNSIGNED_CHAR.
- */
-
-#define HAVE_UNSIGNED_CHAR
-
-#ifdef HAVE_UNSIGNED_CHAR
-unsigned char un_char;
-#endif
-
-
-/* Now we want to find out if your compiler knows what "unsigned short" means.
- * If you get an error on the "unsigned short un_short;" line,
- * then undefine HAVE_UNSIGNED_SHORT.
- */
-
-#define HAVE_UNSIGNED_SHORT
-
-#ifdef HAVE_UNSIGNED_SHORT
-unsigned short un_short;
-#endif
-
-
-/* Now we want to find out if your compiler understands type "void".
- * If you get an error anywhere in here, undefine HAVE_VOID.
- */
-
-#define HAVE_VOID
-
-#ifdef HAVE_VOID
-/* Caution: a C++ compiler will insist on complete prototypes */
-typedef void * void_ptr;	/* check void * */
-#ifdef HAVE_PROTOTYPES		/* check ptr to function returning void */
-typedef void (*void_func) (int a, int b);
-#else
-typedef void (*void_func) ();
-#endif
-
-#ifdef HAVE_PROTOTYPES		/* check void function result */
-void test3function (void_ptr arg1, void_func arg2)
-#else
-void test3function (arg1, arg2)
-     void_ptr arg1;
-     void_func arg2;
-#endif
-{
-  char * locptr = (char *) arg1; /* check casting to and from void * */
-  arg1 = (void *) locptr;
-  (*arg2) (1, 2);		/* check call of fcn returning void */
-}
-#endif
-
-
-/* Now we want to find out if your compiler knows what "const" means.
- * If you get an error here, undefine HAVE_CONST.
- */
-
-#define HAVE_CONST
-
-#ifdef HAVE_CONST
-static const int carray[3] = {1, 2, 3};
-
-#ifdef HAVE_PROTOTYPES
-int test4function (const int arg1)
-#else
-int test4function (arg1)
-     const int arg1;
-#endif
-{
-  return carray[arg1];
-}
-#endif
-
-
-/* If you get an error or warning about this structure definition,
- * define INCOMPLETE_TYPES_BROKEN.
- */
-
-#undef INCOMPLETE_TYPES_BROKEN
-
-#ifndef INCOMPLETE_TYPES_BROKEN
-typedef struct undefined_structure * undef_struct_ptr;
-#endif
-
-
-/* If you get an error about duplicate names,
- * define NEED_SHORT_EXTERNAL_NAMES.
- */
-
-#undef NEED_SHORT_EXTERNAL_NAMES
-
-#ifndef NEED_SHORT_EXTERNAL_NAMES
-
-int possibly_duplicate_function ()
-{
-  return 0;
-}
-
-int possibly_dupli_function ()
-{
-  return 1;
-}
-
-#endif
-
-
-
-/************************************************************************
- *  OK, that's it.  You should not have to change anything beyond this
- *  point in order to compile and execute this program.  (You might get
- *  some warnings, but you can ignore them.)
- *  When you run the program, it will make a couple more tests that it
- *  can do automatically, and then it will create jconfig.h and print out
- *  any additional suggestions it has.
- ************************************************************************
- */
-
-
-#ifdef HAVE_PROTOTYPES
-int is_char_signed (int arg)
-#else
-int is_char_signed (arg)
-     int arg;
-#endif
-{
-  if (arg == 189) {		/* expected result for unsigned char */
-    return 0;			/* type char is unsigned */
-  }
-  else if (arg != -67) {	/* expected result for signed char */
-    printf("Hmm, it seems 'char' is not eight bits wide on your machine.\n");
-    printf("I fear the JPEG software will not work at all.\n\n");
-  }
-  return 1;			/* assume char is signed otherwise */
-}
-
-
-#ifdef HAVE_PROTOTYPES
-int is_shifting_signed (long arg)
-#else
-int is_shifting_signed (arg)
-     long arg;
-#endif
-/* See whether right-shift on a long is signed or not. */
-{
-  long res = arg >> 4;
-
-  if (res == -0x7F7E80CL) {	/* expected result for signed shift */
-    return 1;			/* right shift is signed */
-  }
-  /* see if unsigned-shift hack will fix it. */
-  /* we can't just test exact value since it depends on width of long... */
-  res |= (~0L) << (32-4);
-  if (res == -0x7F7E80CL) {	/* expected result now? */
-    return 0;			/* right shift is unsigned */
-  }
-  printf("Right shift isn't acting as I expect it to.\n");
-  printf("I fear the JPEG software will not work at all.\n\n");
-  return 0;			/* try it with unsigned anyway */
-}
-
-
-#ifdef HAVE_PROTOTYPES
-int main (int argc, char ** argv)
-#else
-int main (argc, argv)
-     int argc;
-     char ** argv;
-#endif
-{
-  char signed_char_check = (char) (-67);
-  FILE *outfile;
-
-  /* Attempt to write jconfig.h */
-  if ((outfile = fopen("jconfig.h", "w")) == NULL) {
-    printf("Failed to write jconfig.h\n");
-    return 1;
-  }
-
-  /* Write out all the info */
-  fprintf(outfile, "/* jconfig.h --- generated by ckconfig.c */\n");
-  fprintf(outfile, "/* see jconfig.doc for explanations */\n\n");
-#ifdef HAVE_PROTOTYPES
-  fprintf(outfile, "#define HAVE_PROTOTYPES\n");
-#else
-  fprintf(outfile, "#undef HAVE_PROTOTYPES\n");
-#endif
-#ifdef HAVE_UNSIGNED_CHAR
-  fprintf(outfile, "#define HAVE_UNSIGNED_CHAR\n");
-#else
-  fprintf(outfile, "#undef HAVE_UNSIGNED_CHAR\n");
-#endif
-#ifdef HAVE_UNSIGNED_SHORT
-  fprintf(outfile, "#define HAVE_UNSIGNED_SHORT\n");
-#else
-  fprintf(outfile, "#undef HAVE_UNSIGNED_SHORT\n");
-#endif
-#ifdef HAVE_VOID
-  fprintf(outfile, "/* #define void char */\n");
-#else
-  fprintf(outfile, "#define void char\n");
-#endif
-#ifdef HAVE_CONST
-  fprintf(outfile, "/* #define const */\n");
-#else
-  fprintf(outfile, "#define const\n");
-#endif
-  if (is_char_signed((int) signed_char_check))
-    fprintf(outfile, "#undef CHAR_IS_UNSIGNED\n");
-  else
-    fprintf(outfile, "#define CHAR_IS_UNSIGNED\n");
-#ifdef HAVE_STDDEF_H
-  fprintf(outfile, "#define HAVE_STDDEF_H\n");
-#else
-  fprintf(outfile, "#undef HAVE_STDDEF_H\n");
-#endif
-#ifdef HAVE_STDLIB_H
-  fprintf(outfile, "#define HAVE_STDLIB_H\n");
-#else
-  fprintf(outfile, "#undef HAVE_STDLIB_H\n");
-#endif
-#ifdef NEED_BSD_STRINGS
-  fprintf(outfile, "#define NEED_BSD_STRINGS\n");
-#else
-  fprintf(outfile, "#undef NEED_BSD_STRINGS\n");
-#endif
-#ifdef NEED_SYS_TYPES_H
-  fprintf(outfile, "#define NEED_SYS_TYPES_H\n");
-#else
-  fprintf(outfile, "#undef NEED_SYS_TYPES_H\n");
-#endif
-  fprintf(outfile, "#undef NEED_FAR_POINTERS\n");
-#ifdef NEED_SHORT_EXTERNAL_NAMES
-  fprintf(outfile, "#define NEED_SHORT_EXTERNAL_NAMES\n");
-#else
-  fprintf(outfile, "#undef NEED_SHORT_EXTERNAL_NAMES\n");
-#endif
-#ifdef INCOMPLETE_TYPES_BROKEN
-  fprintf(outfile, "#define INCOMPLETE_TYPES_BROKEN\n");
-#else
-  fprintf(outfile, "#undef INCOMPLETE_TYPES_BROKEN\n");
-#endif
-  fprintf(outfile, "\n#ifdef JPEG_INTERNALS\n\n");
-  if (is_shifting_signed(-0x7F7E80B1L))
-    fprintf(outfile, "#undef RIGHT_SHIFT_IS_UNSIGNED\n");
-  else
-    fprintf(outfile, "#define RIGHT_SHIFT_IS_UNSIGNED\n");
-  fprintf(outfile, "\n#endif /* JPEG_INTERNALS */\n");
-  fprintf(outfile, "\n#ifdef JPEG_CJPEG_DJPEG\n\n");
-  fprintf(outfile, "#define BMP_SUPPORTED		/* BMP image file format */\n");
-  fprintf(outfile, "#define GIF_SUPPORTED		/* GIF image file format */\n");
-  fprintf(outfile, "#define PPM_SUPPORTED		/* PBMPLUS PPM/PGM image file format */\n");
-  fprintf(outfile, "#undef RLE_SUPPORTED		/* Utah RLE image file format */\n");
-  fprintf(outfile, "#define TARGA_SUPPORTED		/* Targa image file format */\n\n");
-  fprintf(outfile, "#undef TWO_FILE_COMMANDLINE	/* You may need this on non-Unix systems */\n");
-  fprintf(outfile, "#undef NEED_SIGNAL_CATCHER	/* Define this if you use jmemname.c */\n");
-  fprintf(outfile, "#undef DONT_USE_B_MODE\n");
-  fprintf(outfile, "/* #define PROGRESS_REPORT */	/* optional */\n");
-  fprintf(outfile, "\n#endif /* JPEG_CJPEG_DJPEG */\n");
-
-  /* Close the jconfig.h file */
-  fclose(outfile);
-
-  /* User report */
-  printf("Configuration check for Independent JPEG Group's software done.\n");
-  printf("\nI have written the jconfig.h file for you.\n\n");
-#ifdef HAVE_PROTOTYPES
-  printf("You should use makefile.ansi as the starting point for your Makefile.\n");
-#else
-  printf("You should use makefile.unix as the starting point for your Makefile.\n");
-#endif
-
-#ifdef NEED_SPECIAL_INCLUDE
-  printf("\nYou'll need to change jconfig.h to include the system include file\n");
-  printf("that you found type size_t in, or add a direct definition of type\n");
-  printf("size_t if that's what you used.  Just add it to the end.\n");
-#endif
-
-  return 0;
-}

Engine/lib/ljpeg/extras/coderules.doc

@@ -1,118 +0,0 @@
-IJG JPEG LIBRARY:  CODING RULES
-
-Copyright (C) 1991-1996, Thomas G. Lane.
-This file is part of the Independent JPEG Group's software.
-For conditions of distribution and use, see the accompanying README file.
-
-
-Since numerous people will be contributing code and bug fixes, it's important
-to establish a common coding style.  The goal of using similar coding styles
-is much more important than the details of just what that style is.
-
-In general we follow the recommendations of "Recommended C Style and Coding
-Standards" revision 6.1 (Cannon et al. as modified by Spencer, Keppel and
-Brader).  This document is available in the IJG FTP archive (see
-jpeg/doc/cstyle.ms.tbl.Z, or cstyle.txt.Z for those without nroff/tbl).
-
-Block comments should be laid out thusly:
-
-/*
- *  Block comments in this style.
- */
-
-We indent statements in K&R style, e.g.,
-	if (test) {
-	  then-part;
-	} else {
-	  else-part;
-	}
-with two spaces per indentation level.  (This indentation convention is
-handled automatically by GNU Emacs and many other text editors.)
-
-Multi-word names should be written in lower case with underscores, e.g.,
-multi_word_name (not multiWordName).  Preprocessor symbols and enum constants
-are similar but upper case (MULTI_WORD_NAME).  Names should be unique within
-the first fifteen characters.  (On some older systems, global names must be
-unique within six characters.  We accommodate this without cluttering the
-source code by using macros to substitute shorter names.)
-
-We use function prototypes everywhere; we rely on automatic source code
-transformation to feed prototype-less C compilers.  Transformation is done
-by the simple and portable tool 'ansi2knr.c' (courtesy of Ghostscript).
-ansi2knr is not very bright, so it imposes a format requirement on function
-declarations: the function name MUST BEGIN IN COLUMN 1.  Thus all functions
-should be written in the following style:
-
-LOCAL(int *)
-function_name (int a, char *b)
-{
-    code...
-}
-
-Note that each function definition must begin with GLOBAL(type), LOCAL(type),
-or METHODDEF(type).  These macros expand to "static type" or just "type" as
-appropriate.  They provide a readable indication of the routine's usage and
-can readily be changed for special needs.  (For instance, special linkage
-keywords can be inserted for use in Windows DLLs.)
-
-ansi2knr does not transform method declarations (function pointers in
-structs).  We handle these with a macro JMETHOD, defined as
-	#ifdef HAVE_PROTOTYPES
-	#define JMETHOD(type,methodname,arglist)  type (*methodname) arglist
-	#else
-	#define JMETHOD(type,methodname,arglist)  type (*methodname) ()
-	#endif
-which is used like this:
-	struct function_pointers {
-	  JMETHOD(void, init_entropy_encoder, (int somearg, jparms *jp));
-	  JMETHOD(void, term_entropy_encoder, (void));
-	};
-Note the set of parentheses surrounding the parameter list.
-
-A similar solution is used for forward and external function declarations
-(see the EXTERN and JPP macros).
-
-If the code is to work on non-ANSI compilers, we cannot rely on a prototype
-declaration to coerce actual parameters into the right types.  Therefore, use
-explicit casts on actual parameters whenever the actual parameter type is not
-identical to the formal parameter.  Beware of implicit conversions to "int".
-
-It seems there are some non-ANSI compilers in which the sizeof() operator
-is defined to return int, yet size_t is defined as long.  Needless to say,
-this is brain-damaged.  Always use the SIZEOF() macro in place of sizeof(),
-so that the result is guaranteed to be of type size_t.
-
-
-The JPEG library is intended to be used within larger programs.  Furthermore,
-we want it to be reentrant so that it can be used by applications that process
-multiple images concurrently.  The following rules support these requirements:
-
-1. Avoid direct use of file I/O, "malloc", error report printouts, etc;
-pass these through the common routines provided.
-
-2. Minimize global namespace pollution.  Functions should be declared static
-wherever possible.  (Note that our method-based calling conventions help this
-a lot: in many modules only the initialization function will ever need to be
-called directly, so only that function need be externally visible.)  All
-global function names should begin with "jpeg_", and should have an
-abbreviated name (unique in the first six characters) substituted by macro
-when NEED_SHORT_EXTERNAL_NAMES is set.
-
-3. Don't use global variables; anything that must be used in another module
-should be in the common data structures.
-
-4. Don't use static variables except for read-only constant tables.  Variables
-that should be private to a module can be placed into private structures (see
-the system architecture document, structure.doc).
-
-5. Source file names should begin with "j" for files that are part of the
-library proper; source files that are not part of the library, such as cjpeg.c
-and djpeg.c, do not begin with "j".  Keep source file names to eight
-characters (plus ".c" or ".h", etc) to make life easy for MS-DOSers.  Keep
-compression and decompression code in separate source files --- some
-applications may want only one half of the library.
-
-Note: these rules (particularly #4) are not followed religiously in the
-modules that are used in cjpeg/djpeg but are not part of the JPEG library
-proper.  Those modules are not really intended to be used in other
-applications.

Engine/lib/ljpeg/extras/config.guess

@@ -1,883 +0,0 @@
-#! /bin/sh
-# Attempt to guess a canonical system name.
-#   Copyright (C) 1992, 93, 94, 95, 96, 1997 Free Software Foundation, Inc.
-#
-# This file is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Written by Per Bothner <[email protected]>.
-# The master version of this file is at the FSF in /home/gd/gnu/lib.
-#
-# This script attempts to guess a canonical system name similar to
-# config.sub.  If it succeeds, it prints the system name on stdout, and
-# exits with 0.  Otherwise, it exits with 1.
-#
-# The plan is that this can be called by configure scripts if you
-# don't specify an explicit system type (host/target name).
-#
-# Only a few systems have been added to this list; please add others
-# (but try to keep the structure clean).
-#
-
-# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
-# ([email protected] 8/24/94.)
-if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
-	PATH=$PATH:/.attbin ; export PATH
-fi
-
-UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
-UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
-UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
-UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
-
-trap 'rm -f dummy.c dummy.o dummy; exit 1' 1 2 15
-
-# Note: order is significant - the case branches are not exclusive.
-
-case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
-    alpha:OSF1:*:*)
-	if test $UNAME_RELEASE = "V4.0"; then
-		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
-	fi
-	# A Vn.n version is a released version.
-	# A Tn.n version is a released field test version.
-	# A Xn.n version is an unreleased experimental baselevel.
-	# 1.2 uses "1.2" for uname -r.
-	cat <<EOF >dummy.s
-	.globl main
-	.ent main
-main:
-	.frame \$30,0,\$26,0
-	.prologue 0
-	.long 0x47e03d80 # implver $0
-	lda \$2,259
-	.long 0x47e20c21 # amask $2,$1
-	srl \$1,8,\$2
-	sll \$2,2,\$2
-	sll \$0,3,\$0
-	addl \$1,\$0,\$0
-	addl \$2,\$0,\$0
-	ret \$31,(\$26),1
-	.end main
-EOF
-	${CC-cc} dummy.s -o dummy 2>/dev/null
-	if test "$?" = 0 ; then
-		./dummy
-		case "$?" in
-			7)
-				UNAME_MACHINE="alpha"
-				;;
-			15)
-				UNAME_MACHINE="alphaev5"
-				;;
-			14)
-				UNAME_MACHINE="alphaev56"
-				;;
-			10)
-				UNAME_MACHINE="alphapca56"
-				;;
-			16)
-				UNAME_MACHINE="alphaev6"
-				;;
-		esac
-	fi
-	rm -f dummy.s dummy
-	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr [[A-Z]] [[a-z]]`
-	exit 0 ;;
-    21064:Windows_NT:50:3)
-	echo alpha-dec-winnt3.5
-	exit 0 ;;
-    Amiga*:UNIX_System_V:4.0:*)
-	echo m68k-cbm-sysv4
-	exit 0;;
-    amiga:NetBSD:*:*)
-      echo m68k-cbm-netbsd${UNAME_RELEASE}
-      exit 0 ;;
-    amiga:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    arc64:OpenBSD:*:*)
-	echo mips64el-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    arc:OpenBSD:*:*)
-	echo mipsel-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    hkmips:OpenBSD:*:*)
-	echo mips-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    pmax:OpenBSD:*:*)
-	echo mipsel-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    sgi:OpenBSD:*:*)
-	echo mips-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    wgrisc:OpenBSD:*:*)
-	echo mipsel-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
-	echo arm-acorn-riscix${UNAME_RELEASE}
-	exit 0;;
-    arm32:NetBSD:*:*)
-	echo arm-unknown-netbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
-	exit 0 ;;
-    SR2?01:HI-UX/MPP:*:*)
-	echo hppa1.1-hitachi-hiuxmpp
-	exit 0;;
-    Pyramid*:OSx*:*:*|MIS*:OSx*:*:*)
-	# [email protected] (Earle F. Ake) contributed MIS and NILE.
-	if test "`(/bin/universe) 2>/dev/null`" = att ; then
-		echo pyramid-pyramid-sysv3
-	else
-		echo pyramid-pyramid-bsd
-	fi
-	exit 0 ;;
-    NILE:*:*:dcosx)
-	echo pyramid-pyramid-svr4
-	exit 0 ;;
-    sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
-	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit 0 ;;
-    i86pc:SunOS:5.*:*)
-	echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit 0 ;;
-    sun4*:SunOS:6*:*)
-	# According to config.sub, this is the proper way to canonicalize
-	# SunOS6.  Hard to guess exactly what SunOS6 will be like, but
-	# it's likely to be more like Solaris than SunOS4.
-	echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit 0 ;;
-    sun4*:SunOS:*:*)
-	case "`/usr/bin/arch -k`" in
-	    Series*|S4*)
-		UNAME_RELEASE=`uname -v`
-		;;
-	esac
-	# Japanese Language versions have a version number like `4.1.3-JL'.
-	echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
-	exit 0 ;;
-    sun3*:SunOS:*:*)
-	echo m68k-sun-sunos${UNAME_RELEASE}
-	exit 0 ;;
-    sun*:*:4.2BSD:*)
-	UNAME_RELEASE=`(head -1 /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
-	test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
-	case "`/bin/arch`" in
-	    sun3)
-		echo m68k-sun-sunos${UNAME_RELEASE}
-		;;
-	    sun4)
-		echo sparc-sun-sunos${UNAME_RELEASE}
-		;;
-	esac
-	exit 0 ;;
-    aushp:SunOS:*:*)
-	echo sparc-auspex-sunos${UNAME_RELEASE}
-	exit 0 ;;
-    atari*:NetBSD:*:*)
-	echo m68k-atari-netbsd${UNAME_RELEASE}
-	exit 0 ;;
-    atari*:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    sun3*:NetBSD:*:*)
-	echo m68k-sun-netbsd${UNAME_RELEASE}
-	exit 0 ;;
-    sun3*:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    mac68k:NetBSD:*:*)
-	echo m68k-apple-netbsd${UNAME_RELEASE}
-	exit 0 ;;
-    mac68k:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    mvme68k:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    mvme88k:OpenBSD:*:*)
-	echo m88k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    powerpc:machten:*:*)
-	echo powerpc-apple-machten${UNAME_RELEASE}
-	exit 0 ;;
-    RISC*:Mach:*:*)
-	echo mips-dec-mach_bsd4.3
-	exit 0 ;;
-    RISC*:ULTRIX:*:*)
-	echo mips-dec-ultrix${UNAME_RELEASE}
-	exit 0 ;;
-    VAX*:ULTRIX*:*:*)
-	echo vax-dec-ultrix${UNAME_RELEASE}
-	exit 0 ;;
-    2020:CLIX:*:*)
-	echo clipper-intergraph-clix${UNAME_RELEASE}
-	exit 0 ;;
-    mips:*:*:UMIPS | mips:*:*:RISCos)
-	sed 's/^	//' << EOF >dummy.c
-	int main (argc, argv) int argc; char **argv; {
-	#if defined (host_mips) && defined (MIPSEB)
-	#if defined (SYSTYPE_SYSV)
-	  printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
-	#endif
-	#if defined (SYSTYPE_SVR4)
-	  printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
-	#endif
-	#if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
-	  printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
-	#endif
-	#endif
-	  exit (-1);
-	}
-EOF
-	${CC-cc} dummy.c -o dummy \
-	  && ./dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
-	  && rm dummy.c dummy && exit 0
-	rm -f dummy.c dummy
-	echo mips-mips-riscos${UNAME_RELEASE}
-	exit 0 ;;
-    Night_Hawk:Power_UNIX:*:*)
-	echo powerpc-harris-powerunix
-	exit 0 ;;
-    m88k:CX/UX:7*:*)
-	echo m88k-harris-cxux7
-	exit 0 ;;
-    m88k:*:4*:R4*)
-	echo m88k-motorola-sysv4
-	exit 0 ;;
-    m88k:*:3*:R3*)
-	echo m88k-motorola-sysv3
-	exit 0 ;;
-    AViiON:dgux:*:*)
-        # DG/UX returns AViiON for all architectures
-        UNAME_PROCESSOR=`/usr/bin/uname -p`
-        if [ $UNAME_PROCESSOR = mc88100 -o $UNAME_PROCESSOR = mc88110 ] ; then
-	if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx \
-	     -o ${TARGET_BINARY_INTERFACE}x = x ] ; then
-		echo m88k-dg-dgux${UNAME_RELEASE}
-	else
-		echo m88k-dg-dguxbcs${UNAME_RELEASE}
-	fi
-        else echo i586-dg-dgux${UNAME_RELEASE}
-        fi
- 	exit 0 ;;
-    M88*:DolphinOS:*:*)	# DolphinOS (SVR3)
-	echo m88k-dolphin-sysv3
-	exit 0 ;;
-    M88*:*:R3*:*)
-	# Delta 88k system running SVR3
-	echo m88k-motorola-sysv3
-	exit 0 ;;
-    XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
-	echo m88k-tektronix-sysv3
-	exit 0 ;;
-    Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
-	echo m68k-tektronix-bsd
-	exit 0 ;;
-    *:IRIX*:*:*)
-	echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
-	exit 0 ;;
-    ????????:AIX?:[12].1:2)   # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
-	echo romp-ibm-aix      # uname -m gives an 8 hex-code CPU id
-	exit 0 ;;              # Note that: echo "'`uname -s`'" gives 'AIX '
-    i?86:AIX:*:*)
-	echo i386-ibm-aix
-	exit 0 ;;
-    *:AIX:2:3)
-	if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
-		sed 's/^		//' << EOF >dummy.c
-		#include <sys/systemcfg.h>
-
-		main()
-			{
-			if (!__power_pc())
-				exit(1);
-			puts("powerpc-ibm-aix3.2.5");
-			exit(0);
-			}
-EOF
-		${CC-cc} dummy.c -o dummy && ./dummy && rm dummy.c dummy && exit 0
-		rm -f dummy.c dummy
-		echo rs6000-ibm-aix3.2.5
-	elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
-		echo rs6000-ibm-aix3.2.4
-	else
-		echo rs6000-ibm-aix3.2
-	fi
-	exit 0 ;;
-    *:AIX:*:4)
-	if /usr/sbin/lsattr -EHl proc0 | grep POWER >/dev/null 2>&1; then
-		IBM_ARCH=rs6000
-	else
-		IBM_ARCH=powerpc
-	fi
-	if [ -x /usr/bin/oslevel ] ; then
-		IBM_REV=`/usr/bin/oslevel`
-	else
-		IBM_REV=4.${UNAME_RELEASE}
-	fi
-	echo ${IBM_ARCH}-ibm-aix${IBM_REV}
-	exit 0 ;;
-    *:AIX:*:*)
-	echo rs6000-ibm-aix
-	exit 0 ;;
-    ibmrt:4.4BSD:*|romp-ibm:BSD:*)
-	echo romp-ibm-bsd4.4
-	exit 0 ;;
-    ibmrt:*BSD:*|romp-ibm:BSD:*)            # covers RT/PC NetBSD and
-	echo romp-ibm-bsd${UNAME_RELEASE}   # 4.3 with uname added to
-	exit 0 ;;                           # report: romp-ibm BSD 4.3
-    *:BOSX:*:*)
-	echo rs6000-bull-bosx
-	exit 0 ;;
-    DPX/2?00:B.O.S.:*:*)
-	echo m68k-bull-sysv3
-	exit 0 ;;
-    9000/[34]??:4.3bsd:1.*:*)
-	echo m68k-hp-bsd
-	exit 0 ;;
-    hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
-	echo m68k-hp-bsd4.4
-	exit 0 ;;
-    9000/[3478]??:HP-UX:*:*)
-	case "${UNAME_MACHINE}" in
-	    9000/31? )            HP_ARCH=m68000 ;;
-	    9000/[34]?? )         HP_ARCH=m68k ;;
-	    9000/7?? | 9000/8?[1679] ) HP_ARCH=hppa1.1 ;;
-	    9000/8?? )            HP_ARCH=hppa1.0 ;;
-	esac
-	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
-	echo ${HP_ARCH}-hp-hpux${HPUX_REV}
-	exit 0 ;;
-    3050*:HI-UX:*:*)
-	sed 's/^	//' << EOF >dummy.c
-	#include <unistd.h>
-	int
-	main ()
-	{
-	  long cpu = sysconf (_SC_CPU_VERSION);
-	  /* The order matters, because CPU_IS_HP_MC68K erroneously returns
-	     true for CPU_PA_RISC1_0.  CPU_IS_PA_RISC returns correct
-	     results, however.  */
-	  if (CPU_IS_PA_RISC (cpu))
-	    {
-	      switch (cpu)
-		{
-		  case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
-		  case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
-		  case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
-		  default: puts ("hppa-hitachi-hiuxwe2"); break;
-		}
-	    }
-	  else if (CPU_IS_HP_MC68K (cpu))
-	    puts ("m68k-hitachi-hiuxwe2");
-	  else puts ("unknown-hitachi-hiuxwe2");
-	  exit (0);
-	}
-EOF
-	${CC-cc} dummy.c -o dummy && ./dummy && rm dummy.c dummy && exit 0
-	rm -f dummy.c dummy
-	echo unknown-hitachi-hiuxwe2
-	exit 0 ;;
-    9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
-	echo hppa1.1-hp-bsd
-	exit 0 ;;
-    9000/8??:4.3bsd:*:*)
-	echo hppa1.0-hp-bsd
-	exit 0 ;;
-    hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
-	echo hppa1.1-hp-osf
-	exit 0 ;;
-    hp8??:OSF1:*:*)
-	echo hppa1.0-hp-osf
-	exit 0 ;;
-    i?86:OSF1:*:*)
-	if [ -x /usr/sbin/sysversion ] ; then
-	    echo ${UNAME_MACHINE}-unknown-osf1mk
-	else
-	    echo ${UNAME_MACHINE}-unknown-osf1
-	fi
-	exit 0 ;;
-    parisc*:Lites*:*:*)
-	echo hppa1.1-hp-lites
-	exit 0 ;;
-    C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
-	echo c1-convex-bsd
-        exit 0 ;;
-    C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
-	if getsysinfo -f scalar_acc
-	then echo c32-convex-bsd
-	else echo c2-convex-bsd
-	fi
-        exit 0 ;;
-    C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
-	echo c34-convex-bsd
-        exit 0 ;;
-    C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
-	echo c38-convex-bsd
-        exit 0 ;;
-    C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
-	echo c4-convex-bsd
-        exit 0 ;;
-    CRAY*X-MP:*:*:*)
-	echo xmp-cray-unicos
-        exit 0 ;;
-    CRAY*Y-MP:*:*:*)
-	echo ymp-cray-unicos${UNAME_RELEASE}
-	exit 0 ;;
-    CRAY*[A-Z]90:*:*:*)
-	echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
-	| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
-	      -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/
-	exit 0 ;;
-    CRAY*TS:*:*:*)
-	echo t90-cray-unicos${UNAME_RELEASE}
-	exit 0 ;;
-    CRAY-2:*:*:*)
-	echo cray2-cray-unicos
-        exit 0 ;;
-    F300:UNIX_System_V:*:*)
-        FUJITSU_SYS=`uname -p | tr [A-Z] [a-z] | sed -e 's/\///'`
-        FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
-        echo "f300-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
-        exit 0 ;;
-    F301:UNIX_System_V:*:*)
-       echo f301-fujitsu-uxpv`echo $UNAME_RELEASE | sed 's/ .*//'`
-       exit 0 ;;
-    hp3[0-9][05]:NetBSD:*:*)
-	echo m68k-hp-netbsd${UNAME_RELEASE}
-	exit 0 ;;
-    hp300:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    i?86:BSD/386:*:* | *:BSD/OS:*:*)
-	echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
-	exit 0 ;;
-    *:FreeBSD:*:*)
-	echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
-	exit 0 ;;
-    *:NetBSD:*:*)
-	echo ${UNAME_MACHINE}-unknown-netbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
-	exit 0 ;;
-    *:OpenBSD:*:*)
-	echo ${UNAME_MACHINE}-unknown-openbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
-	exit 0 ;;
-    i*:CYGWIN*:*)
-	echo i386-pc-cygwin32
-	exit 0 ;;
-    i*:MINGW*:*)
-	echo i386-pc-mingw32
-	exit 0 ;;
-    p*:CYGWIN*:*)
-	echo powerpcle-unknown-cygwin32
-	exit 0 ;;
-    prep*:SunOS:5.*:*)
-	echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit 0 ;;
-    *:GNU:*:*)
-	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
-	exit 0 ;;
-    *:Linux:*:*)
-	# The BFD linker knows what the default object file format is, so
-	# first see if it will tell us.
-	ld_help_string=`ld --help 2>&1`
-	ld_supported_emulations=`echo $ld_help_string \
-			 | sed -ne '/supported emulations:/!d
-				    s/[ 	][ 	]*/ /g
-				    s/.*supported emulations: *//
-				    s/ .*//
-				    p'`
-        case "$ld_supported_emulations" in
-	  i?86linux)  echo "${UNAME_MACHINE}-pc-linux-gnuaout"      ; exit 0 ;;
-	  i?86coff)   echo "${UNAME_MACHINE}-pc-linux-gnucoff"      ; exit 0 ;;
-	  sparclinux) echo "${UNAME_MACHINE}-unknown-linux-gnuaout" ; exit 0 ;;
-	  m68klinux)  echo "${UNAME_MACHINE}-unknown-linux-gnuaout" ; exit 0 ;;
-	  elf32ppc)   echo "powerpc-unknown-linux-gnu"              ; exit 0 ;;
-	esac
-
-	if test "${UNAME_MACHINE}" = "alpha" ; then
-		sed 's/^	//'  <<EOF >dummy.s
-		.globl main
-		.ent main
-	main:
-		.frame \$30,0,\$26,0
-		.prologue 0
-		.long 0x47e03d80 # implver $0
-		lda \$2,259
-		.long 0x47e20c21 # amask $2,$1
-		srl \$1,8,\$2
-		sll \$2,2,\$2
-		sll \$0,3,\$0
-		addl \$1,\$0,\$0
-		addl \$2,\$0,\$0
-		ret \$31,(\$26),1
-		.end main
-EOF
-		LIBC=""
-		${CC-cc} dummy.s -o dummy 2>/dev/null
-		if test "$?" = 0 ; then
-			./dummy
-			case "$?" in
-			7)
-				UNAME_MACHINE="alpha"
-				;;
-			15)
-				UNAME_MACHINE="alphaev5"
-				;;
-			14)
-				UNAME_MACHINE="alphaev56"
-				;;
-			10)
-				UNAME_MACHINE="alphapca56"
-				;;
-			16)
-				UNAME_MACHINE="alphaev6"
-				;;
-			esac	
-
-			objdump --private-headers dummy | \
-			  grep ld.so.1 > /dev/null
-			if test "$?" = 0 ; then
-				LIBC="libc1"
-			fi
-		fi	
-		rm -f dummy.s dummy
-		echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} ; exit 0
-	elif test "${UNAME_MACHINE}" = "mips" ; then
-	  cat >dummy.c <<EOF
-main(argc, argv)
-     int argc;
-     char *argv[];
-{
-#ifdef __MIPSEB__
-  printf ("%s-unknown-linux-gnu\n", argv[1]);
-#endif
-#ifdef __MIPSEL__
-  printf ("%sel-unknown-linux-gnu\n", argv[1]);
-#endif
-  return 0;
-}
-EOF
-	  ${CC-cc} dummy.c -o dummy 2>/dev/null && ./dummy "${UNAME_MACHINE}" && rm dummy.c dummy && exit 0
-	  rm -f dummy.c dummy
-	else
-	  # Either a pre-BFD a.out linker (linux-gnuoldld)
-	  # or one that does not give us useful --help.
-	  # GCC wants to distinguish between linux-gnuoldld and linux-gnuaout.
-	  # If ld does not provide *any* "supported emulations:"
-	  # that means it is gnuoldld.
-	  echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations:"
-	  test $? != 0 && echo "${UNAME_MACHINE}-pc-linux-gnuoldld" && exit 0
-
-	  case "${UNAME_MACHINE}" in
-	  i?86)
-	    VENDOR=pc;
-	    ;;
-	  *)
-	    VENDOR=unknown;
-	    ;;
-	  esac
-	  # Determine whether the default compiler is a.out or elf
-	  cat >dummy.c <<EOF
-#include <features.h>
-main(argc, argv)
-     int argc;
-     char *argv[];
-{
-#ifdef __ELF__
-# ifdef __GLIBC__
-#  if __GLIBC__ >= 2
-    printf ("%s-${VENDOR}-linux-gnu\n", argv[1]);
-#  else
-    printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]);
-#  endif
-# else
-   printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]);
-# endif
-#else
-  printf ("%s-${VENDOR}-linux-gnuaout\n", argv[1]);
-#endif
-  return 0;
-}
-EOF
-	  ${CC-cc} dummy.c -o dummy 2>/dev/null && ./dummy "${UNAME_MACHINE}" && rm dummy.c dummy && exit 0
-	  rm -f dummy.c dummy
-	fi ;;
-# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.  earlier versions
-# are messed up and put the nodename in both sysname and nodename.
-    i?86:DYNIX/ptx:4*:*)
-	echo i386-sequent-sysv4
-	exit 0 ;;
-    i?86:UNIX_SV:4.2MP:2.*)
-        # Unixware is an offshoot of SVR4, but it has its own version
-        # number series starting with 2...
-        # I am not positive that other SVR4 systems won't match this,
-	# I just have to hope.  -- rms.
-        # Use sysv4.2uw... so that sysv4* matches it.
-	echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
-	exit 0 ;;
-    i?86:*:4.*:* | i?86:SYSTEM_V:4.*:*)
-	if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
-		echo ${UNAME_MACHINE}-univel-sysv${UNAME_RELEASE}
-	else
-		echo ${UNAME_MACHINE}-pc-sysv${UNAME_RELEASE}
-	fi
-	exit 0 ;;
-    i?86:*:3.2:*)
-	if test -f /usr/options/cb.name; then
-		UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
-		echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
-	elif /bin/uname -X 2>/dev/null >/dev/null ; then
-		UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')`
-		(/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486
-		(/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \
-			&& UNAME_MACHINE=i586
-		echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
-	else
-		echo ${UNAME_MACHINE}-pc-sysv32
-	fi
-	exit 0 ;;
-    pc:*:*:*)
-        # uname -m prints for DJGPP always 'pc', but it prints nothing about
-        # the processor, so we play safe by assuming i386.
-	echo i386-pc-msdosdjgpp
-        exit 0 ;;
-    Intel:Mach:3*:*)
-	echo i386-pc-mach3
-	exit 0 ;;
-    paragon:*:*:*)
-	echo i860-intel-osf1
-	exit 0 ;;
-    i860:*:4.*:*) # i860-SVR4
-	if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
-	  echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
-	else # Add other i860-SVR4 vendors below as they are discovered.
-	  echo i860-unknown-sysv${UNAME_RELEASE}  # Unknown i860-SVR4
-	fi
-	exit 0 ;;
-    mini*:CTIX:SYS*5:*)
-	# "miniframe"
-	echo m68010-convergent-sysv
-	exit 0 ;;
-    M68*:*:R3V[567]*:*)
-	test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
-    3[34]??:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 4850:*:4.0:3.0)
-	OS_REL=''
-	test -r /etc/.relid \
-	&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
-	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
-	  && echo i486-ncr-sysv4.3${OS_REL} && exit 0
-	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
-	  && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;;
-    3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
-        /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
-          && echo i486-ncr-sysv4 && exit 0 ;;
-    m68*:LynxOS:2.*:*)
-	echo m68k-unknown-lynxos${UNAME_RELEASE}
-	exit 0 ;;
-    mc68030:UNIX_System_V:4.*:*)
-	echo m68k-atari-sysv4
-	exit 0 ;;
-    i?86:LynxOS:2.*:*)
-	echo i386-unknown-lynxos${UNAME_RELEASE}
-	exit 0 ;;
-    TSUNAMI:LynxOS:2.*:*)
-	echo sparc-unknown-lynxos${UNAME_RELEASE}
-	exit 0 ;;
-    rs6000:LynxOS:2.*:* | PowerPC:LynxOS:2.*:*)
-	echo rs6000-unknown-lynxos${UNAME_RELEASE}
-	exit 0 ;;
-    SM[BE]S:UNIX_SV:*:*)
-	echo mips-dde-sysv${UNAME_RELEASE}
-	exit 0 ;;
-    RM*:SINIX-*:*:*)
-	echo mips-sni-sysv4
-	exit 0 ;;
-    *:SINIX-*:*:*)
-	if uname -p 2>/dev/null >/dev/null ; then
-		UNAME_MACHINE=`(uname -p) 2>/dev/null`
-		echo ${UNAME_MACHINE}-sni-sysv4
-	else
-		echo ns32k-sni-sysv
-	fi
-	exit 0 ;;
-    PENTIUM:CPunix:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
-                           # says <[email protected]>
-        echo i586-unisys-sysv4
-        exit 0 ;;
-    *:UNIX_System_V:4*:FTX*)
-	# From Gerald Hewes <[email protected]>.
-	# How about differentiating between stratus architectures? -djm
-	echo hppa1.1-stratus-sysv4
-	exit 0 ;;
-    *:*:*:FTX*)
-	# From [email protected].
-	echo i860-stratus-sysv4
-	exit 0 ;;
-    mc68*:A/UX:*:*)
-	echo m68k-apple-aux${UNAME_RELEASE}
-	exit 0 ;;
-    news*:NEWS-OS:*:6*)
-	echo mips-sony-newsos6
-	exit 0 ;;
-    R3000:*System_V*:*:* | R4000:UNIX_SYSV:*:*)
-	if [ -d /usr/nec ]; then
-	        echo mips-nec-sysv${UNAME_RELEASE}
-	else
-	        echo mips-unknown-sysv${UNAME_RELEASE}
-	fi
-        exit 0 ;;
-esac
-
-#echo '(No uname command or uname output not recognized.)' 1>&2
-#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
-
-cat >dummy.c <<EOF
-#ifdef _SEQUENT_
-# include <sys/types.h>
-# include <sys/utsname.h>
-#endif
-main ()
-{
-#if defined (sony)
-#if defined (MIPSEB)
-  /* BFD wants "bsd" instead of "newsos".  Perhaps BFD should be changed,
-     I don't know....  */
-  printf ("mips-sony-bsd\n"); exit (0);
-#else
-#include <sys/param.h>
-  printf ("m68k-sony-newsos%s\n",
-#ifdef NEWSOS4
-          "4"
-#else
-	  ""
-#endif
-         ); exit (0);
-#endif
-#endif
-
-#if defined (__arm) && defined (__acorn) && defined (__unix)
-  printf ("arm-acorn-riscix"); exit (0);
-#endif
-
-#if defined (hp300) && !defined (hpux)
-  printf ("m68k-hp-bsd\n"); exit (0);
-#endif
-
-#if defined (NeXT)
-#if !defined (__ARCHITECTURE__)
-#define __ARCHITECTURE__ "m68k"
-#endif
-  int version;
-  version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
-  printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
-  exit (0);
-#endif
-
-#if defined (MULTIMAX) || defined (n16)
-#if defined (UMAXV)
-  printf ("ns32k-encore-sysv\n"); exit (0);
-#else
-#if defined (CMU)
-  printf ("ns32k-encore-mach\n"); exit (0);
-#else
-  printf ("ns32k-encore-bsd\n"); exit (0);
-#endif
-#endif
-#endif
-
-#if defined (__386BSD__)
-  printf ("i386-pc-bsd\n"); exit (0);
-#endif
-
-#if defined (sequent)
-#if defined (i386)
-  printf ("i386-sequent-dynix\n"); exit (0);
-#endif
-#if defined (ns32000)
-  printf ("ns32k-sequent-dynix\n"); exit (0);
-#endif
-#endif
-
-#if defined (_SEQUENT_)
-    struct utsname un;
-
-    uname(&un);
-
-    if (strncmp(un.version, "V2", 2) == 0) {
-	printf ("i386-sequent-ptx2\n"); exit (0);
-    }
-    if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
-	printf ("i386-sequent-ptx1\n"); exit (0);
-    }
-    printf ("i386-sequent-ptx\n"); exit (0);
-
-#endif
-
-#if defined (vax)
-#if !defined (ultrix)
-  printf ("vax-dec-bsd\n"); exit (0);
-#else
-  printf ("vax-dec-ultrix\n"); exit (0);
-#endif
-#endif
-
-#if defined (alliant) && defined (i860)
-  printf ("i860-alliant-bsd\n"); exit (0);
-#endif
-
-  exit (1);
-}
-EOF
-
-${CC-cc} dummy.c -o dummy 2>/dev/null && ./dummy && rm dummy.c dummy && exit 0
-rm -f dummy.c dummy
-
-# Apollos put the system type in the environment.
-
-test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; }
-
-# Convex versions that predate uname can use getsysinfo(1)
-
-if [ -x /usr/convex/getsysinfo ]
-then
-    case `getsysinfo -f cpu_type` in
-    c1*)
-	echo c1-convex-bsd
-	exit 0 ;;
-    c2*)
-	if getsysinfo -f scalar_acc
-	then echo c32-convex-bsd
-	else echo c2-convex-bsd
-	fi
-	exit 0 ;;
-    c34*)
-	echo c34-convex-bsd
-	exit 0 ;;
-    c38*)
-	echo c38-convex-bsd
-	exit 0 ;;
-    c4*)
-	echo c4-convex-bsd
-	exit 0 ;;
-    esac
-fi
-
-#echo '(Unable to guess system type)' 1>&2
-
-exit 1

Engine/lib/ljpeg/extras/config.sub

@@ -1,954 +0,0 @@
-#! /bin/sh
-# Configuration validation subroutine script, version 1.1.
-#   Copyright (C) 1991, 92, 93, 94, 95, 96, 1997 Free Software Foundation, Inc.
-# This file is (in principle) common to ALL GNU software.
-# The presence of a machine in this file suggests that SOME GNU software
-# can handle that machine.  It does not imply ALL GNU software can.
-#
-# This file is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330,
-# Boston, MA 02111-1307, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Configuration subroutine to validate and canonicalize a configuration type.
-# Supply the specified configuration type as an argument.
-# If it is invalid, we print an error message on stderr and exit with code 1.
-# Otherwise, we print the canonical config type on stdout and succeed.
-
-# This file is supposed to be the same for all GNU packages
-# and recognize all the CPU types, system types and aliases
-# that are meaningful with *any* GNU software.
-# Each package is responsible for reporting which valid configurations
-# it does not support.  The user should be able to distinguish
-# a failure to support a valid configuration from a meaningless
-# configuration.
-
-# The goal of this file is to map all the various variations of a given
-# machine specification into a single specification in the form:
-#	CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
-# or in some cases, the newer four-part form:
-#	CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
-# It is wrong to echo any other type of specification.
-
-if [ x$1 = x ]
-then
-	echo Configuration name missing. 1>&2
-	echo "Usage: $0 CPU-MFR-OPSYS" 1>&2
-	echo "or     $0 ALIAS" 1>&2
-	echo where ALIAS is a recognized configuration type. 1>&2
-	exit 1
-fi
-
-# First pass through any local machine types.
-case $1 in
-	*local*)
-		echo $1
-		exit 0
-		;;
-	*)
-	;;
-esac
-
-# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
-# Here we must recognize all the valid KERNEL-OS combinations.
-maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
-case $maybe_os in
-  linux-gnu*)
-    os=-$maybe_os
-    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
-    ;;
-  *)
-    basic_machine=`echo $1 | sed 's/-[^-]*$//'`
-    if [ $basic_machine != $1 ]
-    then os=`echo $1 | sed 's/.*-/-/'`
-    else os=; fi
-    ;;
-esac
-
-### Let's recognize common machines as not being operating systems so
-### that things like config.sub decstation-3100 work.  We also
-### recognize some manufacturers as not being operating systems, so we
-### can provide default operating systems below.
-case $os in
-	-sun*os*)
-		# Prevent following clause from handling this invalid input.
-		;;
-	-dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
-	-att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
-	-unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
-	-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
-	-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
-	-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
-	-apple)
-		os=
-		basic_machine=$1
-		;;
-	-hiux*)
-		os=-hiuxwe2
-		;;
-	-sco5)
-		os=sco3.2v5
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco4)
-		os=-sco3.2v4
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco3.2.[4-9]*)
-		os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco3.2v[4-9]*)
-		# Don't forget version if it is 3.2v4 or newer.
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco*)
-		os=-sco3.2v2
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-isc)
-		os=-isc2.2
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-clix*)
-		basic_machine=clipper-intergraph
-		;;
-	-isc*)
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-lynx*)
-		os=-lynxos
-		;;
-	-ptx*)
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
-		;;
-	-windowsnt*)
-		os=`echo $os | sed -e 's/windowsnt/winnt/'`
-		;;
-	-psos*)
-		os=-psos
-		;;
-esac
-
-# Decode aliases for certain CPU-COMPANY combinations.
-case $basic_machine in
-	# Recognize the basic CPU types without company name.
-	# Some are omitted here because they have special meanings below.
-	tahoe | i860 | m32r | m68k | m68000 | m88k | ns32k | arc | arm \
-		| arme[lb] | pyramid | mn10200 | mn10300 \
-		| tron | a29k | 580 | i960 | h8300 | hppa | hppa1.0 | hppa1.1 \
-		| alpha | alphaev5 | alphaev56 | we32k | ns16k | clipper \
-		| i370 | sh | powerpc | powerpcle | 1750a | dsp16xx | pdp11 \
-		| mips64 | mipsel | mips64el | mips64orion | mips64orionel \
-		| mipstx39 | mipstx39el \
-		| sparc | sparclet | sparclite | sparc64 | v850)
-		basic_machine=$basic_machine-unknown
-		;;
-	# We use `pc' rather than `unknown'
-	# because (1) that's what they normally are, and
-	# (2) the word "unknown" tends to confuse beginning users.
-	i[3456]86)
-	  basic_machine=$basic_machine-pc
-	  ;;
-	# Object if more than one company name word.
-	*-*-*)
-		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
-		exit 1
-		;;
-	# Recognize the basic CPU types with company name.
-	vax-* | tahoe-* | i[3456]86-* | i860-* | m32r-* | m68k-* | m68000-* \
-	      | m88k-* | sparc-* | ns32k-* | fx80-* | arc-* | arm-* | c[123]* \
-	      | mips-* | pyramid-* | tron-* | a29k-* | romp-* | rs6000-* \
-	      | power-* | none-* | 580-* | cray2-* | h8300-* | i960-* \
-	      | xmp-* | ymp-* | hppa-* | hppa1.0-* | hppa1.1-* \
-	      | alpha-* | alphaev5-* | alphaev56-* | we32k-* | cydra-* \
-	      | ns16k-* | pn-* | np1-* | xps100-* | clipper-* | orion-* \
-	      | sparclite-* | pdp11-* | sh-* | powerpc-* | powerpcle-* \
-	      | sparc64-* | mips64-* | mipsel-* \
-	      | mips64el-* | mips64orion-* | mips64orionel-*  \
-	      | mipstx39-* | mipstx39el-* \
-	      | f301-*)
-		;;
-	# Recognize the various machine names and aliases which stand
-	# for a CPU type and a company and sometimes even an OS.
-	3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
-		basic_machine=m68000-att
-		;;
-	3b*)
-		basic_machine=we32k-att
-		;;
-	alliant | fx80)
-		basic_machine=fx80-alliant
-		;;
-	altos | altos3068)
-		basic_machine=m68k-altos
-		;;
-	am29k)
-		basic_machine=a29k-none
-		os=-bsd
-		;;
-	amdahl)
-		basic_machine=580-amdahl
-		os=-sysv
-		;;
-	amiga | amiga-*)
-		basic_machine=m68k-cbm
-		;;
-	amigaos | amigados)
-		basic_machine=m68k-cbm
-		os=-amigaos
-		;;
-	amigaunix | amix)
-		basic_machine=m68k-cbm
-		os=-sysv4
-		;;
-	apollo68)
-		basic_machine=m68k-apollo
-		os=-sysv
-		;;
-	aux)
-		basic_machine=m68k-apple
-		os=-aux
-		;;
-	balance)
-		basic_machine=ns32k-sequent
-		os=-dynix
-		;;
-	convex-c1)
-		basic_machine=c1-convex
-		os=-bsd
-		;;
-	convex-c2)
-		basic_machine=c2-convex
-		os=-bsd
-		;;
-	convex-c32)
-		basic_machine=c32-convex
-		os=-bsd
-		;;
-	convex-c34)
-		basic_machine=c34-convex
-		os=-bsd
-		;;
-	convex-c38)
-		basic_machine=c38-convex
-		os=-bsd
-		;;
-	cray | ymp)
-		basic_machine=ymp-cray
-		os=-unicos
-		;;
-	cray2)
-		basic_machine=cray2-cray
-		os=-unicos
-		;;
-	[ctj]90-cray)
-		basic_machine=c90-cray
-		os=-unicos
-		;;
-	crds | unos)
-		basic_machine=m68k-crds
-		;;
-	da30 | da30-*)
-		basic_machine=m68k-da30
-		;;
-	decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
-		basic_machine=mips-dec
-		;;
-	delta | 3300 | motorola-3300 | motorola-delta \
-	      | 3300-motorola | delta-motorola)
-		basic_machine=m68k-motorola
-		;;
-	delta88)
-		basic_machine=m88k-motorola
-		os=-sysv3
-		;;
-	dpx20 | dpx20-*)
-		basic_machine=rs6000-bull
-		os=-bosx
-		;;
-	dpx2* | dpx2*-bull)
-		basic_machine=m68k-bull
-		os=-sysv3
-		;;
-	ebmon29k)
-		basic_machine=a29k-amd
-		os=-ebmon
-		;;
-	elxsi)
-		basic_machine=elxsi-elxsi
-		os=-bsd
-		;;
-	encore | umax | mmax)
-		basic_machine=ns32k-encore
-		;;
-	fx2800)
-		basic_machine=i860-alliant
-		;;
-	genix)
-		basic_machine=ns32k-ns
-		;;
-	gmicro)
-		basic_machine=tron-gmicro
-		os=-sysv
-		;;
-	h3050r* | hiux*)
-		basic_machine=hppa1.1-hitachi
-		os=-hiuxwe2
-		;;
-	h8300hms)
-		basic_machine=h8300-hitachi
-		os=-hms
-		;;
-	harris)
-		basic_machine=m88k-harris
-		os=-sysv3
-		;;
-	hp300-*)
-		basic_machine=m68k-hp
-		;;
-	hp300bsd)
-		basic_machine=m68k-hp
-		os=-bsd
-		;;
-	hp300hpux)
-		basic_machine=m68k-hp
-		os=-hpux
-		;;
-	hp9k2[0-9][0-9] | hp9k31[0-9])
-		basic_machine=m68000-hp
-		;;
-	hp9k3[2-9][0-9])
-		basic_machine=m68k-hp
-		;;
-	hp9k7[0-9][0-9] | hp7[0-9][0-9] | hp9k8[0-9]7 | hp8[0-9]7)
-		basic_machine=hppa1.1-hp
-		;;
-	hp9k8[0-9][0-9] | hp8[0-9][0-9])
-		basic_machine=hppa1.0-hp
-		;;
-	hppa-next)
-		os=-nextstep3
-		;;
-	i370-ibm* | ibm*)
-		basic_machine=i370-ibm
-		os=-mvs
-		;;
-# I'm not sure what "Sysv32" means.  Should this be sysv3.2?
-	i[3456]86v32)
-		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
-		os=-sysv32
-		;;
-	i[3456]86v4*)
-		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
-		os=-sysv4
-		;;
-	i[3456]86v)
-		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
-		os=-sysv
-		;;
-	i[3456]86sol2)
-		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
-		os=-solaris2
-		;;
-	iris | iris4d)
-		basic_machine=mips-sgi
-		case $os in
-		    -irix*)
-			;;
-		    *)
-			os=-irix4
-			;;
-		esac
-		;;
-	isi68 | isi)
-		basic_machine=m68k-isi
-		os=-sysv
-		;;
-	m88k-omron*)
-		basic_machine=m88k-omron
-		;;
-	magnum | m3230)
-		basic_machine=mips-mips
-		os=-sysv
-		;;
-	merlin)
-		basic_machine=ns32k-utek
-		os=-sysv
-		;;
-	miniframe)
-		basic_machine=m68000-convergent
-		;;
-	mipsel*-linux*)
-		basic_machine=mipsel-unknown
-		os=-linux-gnu
-		;;
-	mips*-linux*)
-		basic_machine=mips-unknown
-		os=-linux-gnu
-		;;
-	mips3*-*)
-		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
-		;;
-	mips3*)
-		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
-		;;
-	ncr3000)
-		basic_machine=i486-ncr
-		os=-sysv4
-		;;
-	news | news700 | news800 | news900)
-		basic_machine=m68k-sony
-		os=-newsos
-		;;
-	news1000)
-		basic_machine=m68030-sony
-		os=-newsos
-		;;
-	news-3600 | risc-news)
-		basic_machine=mips-sony
-		os=-newsos
-		;;
-	next | m*-next )
-		basic_machine=m68k-next
-		case $os in
-		    -nextstep* )
-			;;
-		    -ns2*)
-		      os=-nextstep2
-			;;
-		    *)
-		      os=-nextstep3
-			;;
-		esac
-		;;
-	nh3000)
-		basic_machine=m68k-harris
-		os=-cxux
-		;;
-	nh[45]000)
-		basic_machine=m88k-harris
-		os=-cxux
-		;;
-	nindy960)
-		basic_machine=i960-intel
-		os=-nindy
-		;;
-	np1)
-		basic_machine=np1-gould
-		;;
-	pa-hitachi)
-		basic_machine=hppa1.1-hitachi
-		os=-hiuxwe2
-		;;
-	paragon)
-		basic_machine=i860-intel
-		os=-osf
-		;;
-	pbd)
-		basic_machine=sparc-tti
-		;;
-	pbb)
-		basic_machine=m68k-tti
-		;;
-        pc532 | pc532-*)
-		basic_machine=ns32k-pc532
-		;;
-	pentium | p5)
-		basic_machine=i586-intel
-		;;
-	pentiumpro | p6)
-		basic_machine=i686-intel
-		;;
-	pentium-* | p5-*)
-		basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	pentiumpro-* | p6-*)
-		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	k5)
-		# We don't have specific support for AMD's K5 yet, so just call it a Pentium
-		basic_machine=i586-amd
-		;;
-	nexen)
-		# We don't have specific support for Nexgen yet, so just call it a Pentium
-		basic_machine=i586-nexgen
-		;;
-	pn)
-		basic_machine=pn-gould
-		;;
-	power)	basic_machine=rs6000-ibm
-		;;
-	ppc)	basic_machine=powerpc-unknown
-	        ;;
-	ppc-*)	basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	ppcle | powerpclittle | ppc-le | powerpc-little)
-		basic_machine=powerpcle-unknown
-	        ;;
-	ppcle-* | powerpclittle-*)
-		basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	ps2)
-		basic_machine=i386-ibm
-		;;
-	rm[46]00)
-		basic_machine=mips-siemens
-		;;
-	rtpc | rtpc-*)
-		basic_machine=romp-ibm
-		;;
-	sequent)
-		basic_machine=i386-sequent
-		;;
-	sh)
-		basic_machine=sh-hitachi
-		os=-hms
-		;;
-	sps7)
-		basic_machine=m68k-bull
-		os=-sysv2
-		;;
-	spur)
-		basic_machine=spur-unknown
-		;;
-	sun2)
-		basic_machine=m68000-sun
-		;;
-	sun2os3)
-		basic_machine=m68000-sun
-		os=-sunos3
-		;;
-	sun2os4)
-		basic_machine=m68000-sun
-		os=-sunos4
-		;;
-	sun3os3)
-		basic_machine=m68k-sun
-		os=-sunos3
-		;;
-	sun3os4)
-		basic_machine=m68k-sun
-		os=-sunos4
-		;;
-	sun4os3)
-		basic_machine=sparc-sun
-		os=-sunos3
-		;;
-	sun4os4)
-		basic_machine=sparc-sun
-		os=-sunos4
-		;;
-	sun4sol2)
-		basic_machine=sparc-sun
-		os=-solaris2
-		;;
-	sun3 | sun3-*)
-		basic_machine=m68k-sun
-		;;
-	sun4)
-		basic_machine=sparc-sun
-		;;
-	sun386 | sun386i | roadrunner)
-		basic_machine=i386-sun
-		;;
-	symmetry)
-		basic_machine=i386-sequent
-		os=-dynix
-		;;
-	tx39)
-		basic_machine=mipstx39-unknown
-		;;
-	tx39el)
-		basic_machine=mipstx39el-unknown
-		;;
-	tower | tower-32)
-		basic_machine=m68k-ncr
-		;;
-	udi29k)
-		basic_machine=a29k-amd
-		os=-udi
-		;;
-	ultra3)
-		basic_machine=a29k-nyu
-		os=-sym1
-		;;
-	vaxv)
-		basic_machine=vax-dec
-		os=-sysv
-		;;
-	vms)
-		basic_machine=vax-dec
-		os=-vms
-		;;
-	vpp*|vx|vx-*)
-               basic_machine=f301-fujitsu
-               ;;
-	vxworks960)
-		basic_machine=i960-wrs
-		os=-vxworks
-		;;
-	vxworks68)
-		basic_machine=m68k-wrs
-		os=-vxworks
-		;;
-	vxworks29k)
-		basic_machine=a29k-wrs
-		os=-vxworks
-		;;
-	xmp)
-		basic_machine=xmp-cray
-		os=-unicos
-		;;
-        xps | xps100)
-		basic_machine=xps100-honeywell
-		;;
-	none)
-		basic_machine=none-none
-		os=-none
-		;;
-
-# Here we handle the default manufacturer of certain CPU types.  It is in
-# some cases the only manufacturer, in others, it is the most popular.
-	mips)
-		if [ x$os = x-linux-gnu ]; then
-			basic_machine=mips-unknown
-		else
-			basic_machine=mips-mips
-		fi
-		;;
-	romp)
-		basic_machine=romp-ibm
-		;;
-	rs6000)
-		basic_machine=rs6000-ibm
-		;;
-	vax)
-		basic_machine=vax-dec
-		;;
-	pdp11)
-		basic_machine=pdp11-dec
-		;;
-	we32k)
-		basic_machine=we32k-att
-		;;
-	sparc)
-		basic_machine=sparc-sun
-		;;
-        cydra)
-		basic_machine=cydra-cydrome
-		;;
-	orion)
-		basic_machine=orion-highlevel
-		;;
-	orion105)
-		basic_machine=clipper-highlevel
-		;;
-	*)
-		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
-		exit 1
-		;;
-esac
-
-# Here we canonicalize certain aliases for manufacturers.
-case $basic_machine in
-	*-digital*)
-		basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
-		;;
-	*-commodore*)
-		basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
-		;;
-	*)
-		;;
-esac
-
-# Decode manufacturer-specific aliases for certain operating systems.
-
-if [ x"$os" != x"" ]
-then
-case $os in
-        # First match some system type aliases
-        # that might get confused with valid system types.
-	# -solaris* is a basic system type, with this one exception.
-	-solaris1 | -solaris1.*)
-		os=`echo $os | sed -e 's|solaris1|sunos4|'`
-		;;
-	-solaris)
-		os=-solaris2
-		;;
-	-svr4*)
-		os=-sysv4
-		;;
-	-unixware*)
-		os=-sysv4.2uw
-		;;
-	-gnu/linux*)
-		os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
-		;;
-	# First accept the basic system types.
-	# The portable systems comes first.
-	# Each alternative MUST END IN A *, to match a version number.
-	# -sysv* is not here because it comes later, after sysvr4.
-	-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
-	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\
-	      | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
-	      | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
-	      | -aos* \
-	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
-	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
-	      | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \
-	      | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* \
-	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
-	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
-	      | -cygwin32* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
-	      | -mingw32* | -linux-gnu* | -uxpv*)
-	# Remember, each alternative MUST END IN *, to match a version number.
-		;;
-	-linux*)
-		os=`echo $os | sed -e 's|linux|linux-gnu|'`
-		;;
-	-sunos5*)
-		os=`echo $os | sed -e 's|sunos5|solaris2|'`
-		;;
-	-sunos6*)
-		os=`echo $os | sed -e 's|sunos6|solaris3|'`
-		;;
-	-osfrose*)
-		os=-osfrose
-		;;
-	-osf*)
-		os=-osf
-		;;
-	-utek*)
-		os=-bsd
-		;;
-	-dynix*)
-		os=-bsd
-		;;
-	-acis*)
-		os=-aos
-		;;
-	-ctix* | -uts*)
-		os=-sysv
-		;;
-	-ns2 )
-	        os=-nextstep2
-		;;
-	# Preserve the version number of sinix5.
-	-sinix5.*)
-		os=`echo $os | sed -e 's|sinix|sysv|'`
-		;;
-	-sinix*)
-		os=-sysv4
-		;;
-	-triton*)
-		os=-sysv3
-		;;
-	-oss*)
-		os=-sysv3
-		;;
-	-svr4)
-		os=-sysv4
-		;;
-	-svr3)
-		os=-sysv3
-		;;
-	-sysvr4)
-		os=-sysv4
-		;;
-	# This must come after -sysvr4.
-	-sysv*)
-		;;
-	-xenix)
-		os=-xenix
-		;;
-	-none)
-		;;
-	*)
-		# Get rid of the `-' at the beginning of $os.
-		os=`echo $os | sed 's/[^-]*-//'`
-		echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
-		exit 1
-		;;
-esac
-else
-
-# Here we handle the default operating systems that come with various machines.
-# The value should be what the vendor currently ships out the door with their
-# machine or put another way, the most popular os provided with the machine.
-
-# Note that if you're going to try to match "-MANUFACTURER" here (say,
-# "-sun"), then you have to tell the case statement up towards the top
-# that MANUFACTURER isn't an operating system.  Otherwise, code above
-# will signal an error saying that MANUFACTURER isn't an operating
-# system, and we'll never get to this point.
-
-case $basic_machine in
-	*-acorn)
-		os=-riscix1.2
-		;;
-	arm*-semi)
-		os=-aout
-		;;
-        pdp11-*)
-		os=-none
-		;;
-	*-dec | vax-*)
-		os=-ultrix4.2
-		;;
-	m68*-apollo)
-		os=-domain
-		;;
-	i386-sun)
-		os=-sunos4.0.2
-		;;
-	m68000-sun)
-		os=-sunos3
-		# This also exists in the configure program, but was not the
-		# default.
-		# os=-sunos4
-		;;
-	*-tti)	# must be before sparc entry or we get the wrong os.
-		os=-sysv3
-		;;
-	sparc-* | *-sun)
-		os=-sunos4.1.1
-		;;
-	*-ibm)
-		os=-aix
-		;;
-	*-hp)
-		os=-hpux
-		;;
-	*-hitachi)
-		os=-hiux
-		;;
-	i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
-		os=-sysv
-		;;
-	*-cbm)
-		os=-amigaos
-		;;
-	*-dg)
-		os=-dgux
-		;;
-	*-dolphin)
-		os=-sysv3
-		;;
-	m68k-ccur)
-		os=-rtu
-		;;
-	m88k-omron*)
-		os=-luna
-		;;
-	*-next )
-		os=-nextstep
-		;;
-	*-sequent)
-		os=-ptx
-		;;
-	*-crds)
-		os=-unos
-		;;
-	*-ns)
-		os=-genix
-		;;
-	i370-*)
-		os=-mvs
-		;;
-	*-next)
-		os=-nextstep3
-		;;
-        *-gould)
-		os=-sysv
-		;;
-        *-highlevel)
-		os=-bsd
-		;;
-	*-encore)
-		os=-bsd
-		;;
-        *-sgi)
-		os=-irix
-		;;
-        *-siemens)
-		os=-sysv4
-		;;
-	*-masscomp)
-		os=-rtu
-		;;
-	f301-fujitsu)
-		os=-uxpv
-		;;
-	*)
-		os=-none
-		;;
-esac
-fi
-
-# Here we handle the case where we know the os, and the CPU type, but not the
-# manufacturer.  We pick the logical manufacturer.
-vendor=unknown
-case $basic_machine in
-	*-unknown)
-		case $os in
-			-riscix*)
-				vendor=acorn
-				;;
-			-sunos*)
-				vendor=sun
-				;;
-			-aix*)
-				vendor=ibm
-				;;
-			-hpux*)
-				vendor=hp
-				;;
-			-hiux*)
-				vendor=hitachi
-				;;
-			-unos*)
-				vendor=crds
-				;;
-			-dgux*)
-				vendor=dg
-				;;
-			-luna*)
-				vendor=omron
-				;;
-			-genix*)
-				vendor=ns
-				;;
-			-mvs*)
-				vendor=ibm
-				;;
-			-ptx*)
-				vendor=sequent
-				;;
-			-vxsim* | -vxworks*)
-				vendor=wrs
-				;;
-			-aux*)
-				vendor=apple
-				;;
-		esac
-		basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
-		;;
-esac
-
-echo $basic_machine$os

Engine/lib/ljpeg/extras/configure

@@ -1,2011 +0,0 @@
-#! /bin/sh
-
-# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.12 
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-
-# Defaults:
-ac_help=
-ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
-  --enable-shared         build shared library using GNU libtool"
-ac_help="$ac_help
-  --enable-static         build static library using GNU libtool"
-ac_help="$ac_help
-  --enable-maxmem[=N]     enable use of temp files, set max mem usage to N MB"
-ac_help="$ac_help
-"
-
-# Initialize some variables set by options.
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
-exec_prefix=NONE
-host=NONE
-no_create=
-nonopt=NONE
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-srcdir=
-target=NONE
-verbose=
-x_includes=NONE
-x_libraries=NONE
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
-ac_prev=
-for ac_option
-do
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
-    ac_prev=
-    continue
-  fi
-
-  case "$ac_option" in
-  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) ac_optarg= ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case "$ac_option" in
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir="$ac_optarg" ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build="$ac_optarg" ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file="$ac_optarg" ;;
-
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
-    datadir="$ac_optarg" ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    eval "enable_${ac_feature}=no" ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
-    fi
-    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_${ac_feature}='$ac_optarg'" ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix="$ac_optarg" ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he)
-    # Omit some internal or obsolete options to make the list less imposing.
-    # This message is too long to be a string in the A/UX 3.1 sh.
-    cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
-  --cache-file=FILE       cache test results in FILE
-  --help                  print this message
-  --no-create             do not create output files
-  --quiet, --silent       do not print \`checking...' messages
-  --version               print the version of autoconf that created configure
-Directory and file names:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-                          [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-                          [same as prefix]
-  --bindir=DIR            user executables in DIR [EPREFIX/bin]
-  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
-  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
-  --datadir=DIR           read-only architecture-independent data in DIR
-                          [PREFIX/share]
-  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
-  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
-                          [PREFIX/com]
-  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
-  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
-  --includedir=DIR        C header files in DIR [PREFIX/include]
-  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
-  --infodir=DIR           info documentation in DIR [PREFIX/info]
-  --mandir=DIR            man documentation in DIR [PREFIX/man]
-  --srcdir=DIR            find the sources in DIR [configure dir or ..]
-  --program-prefix=PREFIX prepend PREFIX to installed program names
-  --program-suffix=SUFFIX append SUFFIX to installed program names
-  --program-transform-name=PROGRAM
-                          run sed PROGRAM on installed program names
-EOF
-    cat << EOF
-Host type:
-  --build=BUILD           configure for building on BUILD [BUILD=HOST]
-  --host=HOST             configure for HOST [guessed]
-  --target=TARGET         configure for TARGET [TARGET=HOST]
-Features and packages:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
-  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --x-includes=DIR        X include files are in DIR
-  --x-libraries=DIR       X library files are in DIR
-EOF
-    if test -n "$ac_help"; then
-      echo "--enable and --with options recognized:$ac_help"
-    fi
-    exit 0 ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host="$ac_optarg" ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir="$ac_optarg" ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir="$ac_optarg" ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir="$ac_optarg" ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir="$ac_optarg" ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
-    localstatedir="$ac_optarg" ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir="$ac_optarg" ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir="$ac_optarg" ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix="$ac_optarg" ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix="$ac_optarg" ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix="$ac_optarg" ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name="$ac_optarg" ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir="$ac_optarg" ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir="$ac_optarg" ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site="$ac_optarg" ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir="$ac_optarg" ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir="$ac_optarg" ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target="$ac_optarg" ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.12"
-    exit 0 ;;
-
-  -with-* | --with-*)
-    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case "$ac_option" in
-      *=*) ;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_${ac_package}='$ac_optarg'" ;;
-
-  -without-* | --without-*)
-    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
-    # Reject names that are not valid shell variable names.
-    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
-    fi
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    eval "with_${ac_package}=no" ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes="$ac_optarg" ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries="$ac_optarg" ;;
-
-  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
-    ;;
-
-  *=*)
-    varname=`echo "$ac_option"|sed -e 's/=.*//'`
-    # Reject names that aren't valid shell variable names.
-    if test -n "`echo $varname| sed 's/[a-zA-Z0-9_]//g'`"; then
-      { echo "configure: error: $varname: invalid shell variable name" 1>&2; exit 1; }
-    fi
-    val="`echo "$ac_option"|sed 's/[^=]*=//'`"
-    test -n "$verbose" && echo "	setting shell variable $varname to $val"
-    eval "$varname='$val'"
-    eval "export $varname" ;;
-
-  *)
-    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
-      echo "configure: warning: $ac_option: invalid host type" 1>&2
-    fi
-    if test "x$nonopt" != xNONE; then
-      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
-    fi
-    nonopt="$ac_option"
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>./config.log
-
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
-
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
-do
-  case "$ac_arg" in
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c) ;;
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
-  esac
-done
-
-# NLS nuisances.
-# Only set these to C if already set.  These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
-
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=jcmaster.c
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_prog=$0
-  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
-  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
-  srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
-  else
-    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
-  fi
-fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
-
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$CONFIG_SITE"; then
-  if test "x$prefix" != xNONE; then
-    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-  else
-    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-  fi
-fi
-for ac_site_file in $CONFIG_SITE; do
-  if test -r "$ac_site_file"; then
-    echo "loading site script $ac_site_file"
-    . "$ac_site_file"
-  fi
-done
-
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says [email protected].
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:538: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
-  for ac_dir in $PATH; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_CC="gcc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:567: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
-  ac_prog_rejected=no
-  for ac_dir in $PATH; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
-        ac_prog_rejected=yes
-	continue
-      fi
-      ac_cv_prog_CC="cc"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# -gt 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    set dummy "$ac_dir/$ac_word" "$@"
-    shift
-    ac_cv_prog_CC="$@"
-  fi
-fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
-  echo "$ac_t""$CC" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:615: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
-
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-cat > conftest.$ac_ext <<EOF
-#line 625 "configure"
-#include "confdefs.h"
-main(){return(0);}
-EOF
-if { (eval echo configure:629: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
-  ac_cv_prog_cc_works=yes
-  # If we can't run a trivial program, we are probably using a cross compiler.
-  if (./conftest; exit) 2>/dev/null; then
-    ac_cv_prog_cc_cross=no
-  else
-    ac_cv_prog_cc_cross=yes
-  fi
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  ac_cv_prog_cc_works=no
-fi
-rm -fr conftest*
-
-echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
-if test $ac_cv_prog_cc_works = no; then
-  { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
-fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:649: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
-echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
-cross_compiling=$ac_cv_prog_cc_cross
-
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:654: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:663: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_prog_gcc=yes
-else
-  ac_cv_prog_gcc=no
-fi
-fi
-
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-
-if test $ac_cv_prog_gcc = yes; then
-  GCC=yes
-  test "${CFLAGS+set}" = set || CFLAGS="-O2"
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-O"
-fi
-
-echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:681: checking how to run the C preprocessor" >&5
-# On Suns, sometimes $CPP names a directory.
-if test -n "$CPP" && test -d "$CPP"; then
-  CPP=
-fi
-if test -z "$CPP"; then
-if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    # This must be in double quotes, not single quotes, because CPP may get
-  # substituted into the Makefile and "${CC-cc}" will confuse make.
-  CPP="${CC-cc} -E"
-  # On the NeXT, cc -E runs the code through the compiler's parser,
-  # not just through cpp.
-  cat > conftest.$ac_ext <<EOF
-#line 696 "configure"
-#include "confdefs.h"
-#include <assert.h>
-Syntax Error
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:702: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
-if test -z "$ac_err"; then
-  :
-else
-  echo "$ac_err" >&5
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  CPP="${CC-cc} -E -traditional-cpp"
-  cat > conftest.$ac_ext <<EOF
-#line 713 "configure"
-#include "confdefs.h"
-#include <assert.h>
-Syntax Error
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:719: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
-if test -z "$ac_err"; then
-  :
-else
-  echo "$ac_err" >&5
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  CPP=/lib/cpp
-fi
-rm -f conftest*
-fi
-rm -f conftest*
-  ac_cv_prog_CPP="$CPP"
-fi
-  CPP="$ac_cv_prog_CPP"
-else
-  ac_cv_prog_CPP="$CPP"
-fi
-echo "$ac_t""$CPP" 1>&6
-
-echo $ac_n "checking for function prototypes""... $ac_c" 1>&6
-echo "configure:742: checking for function prototypes" >&5
-if eval "test \"`echo '$''{'ijg_cv_have_prototypes'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 747 "configure"
-#include "confdefs.h"
-
-int testfunction (int arg1, int * arg2); /* check prototypes */
-struct methods_struct {		/* check method-pointer declarations */
-  int (*error_exit) (char *msgtext);
-  int (*trace_message) (char *msgtext);
-  int (*another_method) (void);
-};
-int testfunction (int arg1, int * arg2) /* check definitions */
-{ return arg2[arg1]; }
-int test2function (void)	/* check void arg list */
-{ return 0; }
-
-int main() {
- 
-; return 0; }
-EOF
-if { (eval echo configure:765: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ijg_cv_have_prototypes=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ijg_cv_have_prototypes=no
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ijg_cv_have_prototypes" 1>&6
-if test $ijg_cv_have_prototypes = yes; then
-  cat >> confdefs.h <<\EOF
-#define HAVE_PROTOTYPES 
-EOF
-
-else
-  echo Your compiler does not seem to know about function prototypes.
-  echo Perhaps it needs a special switch to enable ANSI C mode.
-  echo If so, we recommend running configure like this:
-  echo "   ./configure  CC='cc -switch'"
-  echo where -switch is the proper switch.
-fi
-ac_safe=`echo "stddef.h" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for stddef.h""... $ac_c" 1>&6
-echo "configure:792: checking for stddef.h" >&5
-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 797 "configure"
-#include "confdefs.h"
-#include <stddef.h>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:802: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
-if test -z "$ac_err"; then
-  rm -rf conftest*
-  eval "ac_cv_header_$ac_safe=yes"
-else
-  echo "$ac_err" >&5
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  eval "ac_cv_header_$ac_safe=no"
-fi
-rm -f conftest*
-fi
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  cat >> confdefs.h <<\EOF
-#define HAVE_STDDEF_H 
-EOF
-
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-ac_safe=`echo "stdlib.h" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for stdlib.h""... $ac_c" 1>&6
-echo "configure:828: checking for stdlib.h" >&5
-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 833 "configure"
-#include "confdefs.h"
-#include <stdlib.h>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:838: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
-if test -z "$ac_err"; then
-  rm -rf conftest*
-  eval "ac_cv_header_$ac_safe=yes"
-else
-  echo "$ac_err" >&5
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  eval "ac_cv_header_$ac_safe=no"
-fi
-rm -f conftest*
-fi
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  cat >> confdefs.h <<\EOF
-#define HAVE_STDLIB_H 
-EOF
-
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-ac_safe=`echo "string.h" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for string.h""... $ac_c" 1>&6
-echo "configure:864: checking for string.h" >&5
-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 869 "configure"
-#include "confdefs.h"
-#include <string.h>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:874: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
-if test -z "$ac_err"; then
-  rm -rf conftest*
-  eval "ac_cv_header_$ac_safe=yes"
-else
-  echo "$ac_err" >&5
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  eval "ac_cv_header_$ac_safe=no"
-fi
-rm -f conftest*
-fi
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  :
-else
-  echo "$ac_t""no" 1>&6
-cat >> confdefs.h <<\EOF
-#define NEED_BSD_STRINGS 
-EOF
-
-fi
-
-echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:900: checking for size_t" >&5
-cat > conftest.$ac_ext <<EOF
-#line 902 "configure"
-#include "confdefs.h"
-
-#ifdef HAVE_STDDEF_H
-#include <stddef.h>
-#endif
-#ifdef HAVE_STDLIB_H
-#include <stdlib.h>
-#endif
-#include <stdio.h>
-#ifdef NEED_BSD_STRINGS
-#include <strings.h>
-#else
-#include <string.h>
-#endif
-typedef size_t my_size_t;
-
-int main() {
- my_size_t foovar; 
-; return 0; }
-EOF
-if { (eval echo configure:923: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ijg_size_t_ok=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ijg_size_t_ok="not ANSI, perhaps it is in sys/types.h"
-fi
-rm -f conftest*
-echo "$ac_t""$ijg_size_t_ok" 1>&6
-if test "$ijg_size_t_ok" != yes; then
-ac_safe=`echo "sys/types.h" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for sys/types.h""... $ac_c" 1>&6
-echo "configure:937: checking for sys/types.h" >&5
-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 942 "configure"
-#include "confdefs.h"
-#include <sys/types.h>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:947: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
-if test -z "$ac_err"; then
-  rm -rf conftest*
-  eval "ac_cv_header_$ac_safe=yes"
-else
-  echo "$ac_err" >&5
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  eval "ac_cv_header_$ac_safe=no"
-fi
-rm -f conftest*
-fi
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
-  echo "$ac_t""yes" 1>&6
-  cat >> confdefs.h <<\EOF
-#define NEED_SYS_TYPES_H 
-EOF
-
-cat > conftest.$ac_ext <<EOF
-#line 968 "configure"
-#include "confdefs.h"
-#include <sys/types.h>
-EOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  egrep "size_t" >/dev/null 2>&1; then
-  rm -rf conftest*
-  ijg_size_t_ok="size_t is in sys/types.h"
-else
-  rm -rf conftest*
-  ijg_size_t_ok=no
-fi
-rm -f conftest*
-
-else
-  echo "$ac_t""no" 1>&6
-ijg_size_t_ok=no
-fi
-
-echo "$ac_t""$ijg_size_t_ok" 1>&6
-if test "$ijg_size_t_ok" = no; then
-  echo Type size_t is not defined in any of the usual places.
-  echo Try putting '"typedef unsigned int size_t;"' in jconfig.h.
-fi
-fi
-echo $ac_n "checking for type unsigned char""... $ac_c" 1>&6
-echo "configure:994: checking for type unsigned char" >&5
-cat > conftest.$ac_ext <<EOF
-#line 996 "configure"
-#include "confdefs.h"
-
-int main() {
- unsigned char un_char; 
-; return 0; }
-EOF
-if { (eval echo configure:1003: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  echo "$ac_t""yes" 1>&6
-cat >> confdefs.h <<\EOF
-#define HAVE_UNSIGNED_CHAR 
-EOF
-
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  echo "$ac_t""no" 1>&6
-fi
-rm -f conftest*
-echo $ac_n "checking for type unsigned short""... $ac_c" 1>&6
-echo "configure:1018: checking for type unsigned short" >&5
-cat > conftest.$ac_ext <<EOF
-#line 1020 "configure"
-#include "confdefs.h"
-
-int main() {
- unsigned short un_short; 
-; return 0; }
-EOF
-if { (eval echo configure:1027: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  echo "$ac_t""yes" 1>&6
-cat >> confdefs.h <<\EOF
-#define HAVE_UNSIGNED_SHORT 
-EOF
-
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  echo "$ac_t""no" 1>&6
-fi
-rm -f conftest*
-echo $ac_n "checking for type void""... $ac_c" 1>&6
-echo "configure:1042: checking for type void" >&5
-cat > conftest.$ac_ext <<EOF
-#line 1044 "configure"
-#include "confdefs.h"
-
-/* Caution: a C++ compiler will insist on valid prototypes */
-typedef void * void_ptr;	/* check void * */
-#ifdef HAVE_PROTOTYPES		/* check ptr to function returning void */
-typedef void (*void_func) (int a, int b);
-#else
-typedef void (*void_func) ();
-#endif
-
-#ifdef HAVE_PROTOTYPES		/* check void function result */
-void test3function (void_ptr arg1, void_func arg2)
-#else
-void test3function (arg1, arg2)
-     void_ptr arg1;
-     void_func arg2;
-#endif
-{
-  char * locptr = (char *) arg1; /* check casting to and from void * */
-  arg1 = (void *) locptr;
-  (*arg2) (1, 2);		/* check call of fcn returning void */
-}
-
-int main() {
- 
-; return 0; }
-EOF
-if { (eval echo configure:1072: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  echo "$ac_t""yes" 1>&6
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  echo "$ac_t""no" 1>&6
-cat >> confdefs.h <<\EOF
-#define void char
-EOF
-
-fi
-rm -f conftest*
-
-echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:1088: checking for working const" >&5
-if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 1093 "configure"
-#include "confdefs.h"
-
-int main() {
-
-/* Ultrix mips cc rejects this.  */
-typedef int charset[2]; const charset x;
-/* SunOS 4.1.1 cc rejects this.  */
-char const *const *ccp;
-char **p;
-/* NEC SVR4.0.2 mips cc rejects this.  */
-struct point {int x, y;};
-static struct point const zero = {0,0};
-/* AIX XL C 1.02.0.0 rejects this.
-   It does not let you subtract one const X* pointer from another in an arm
-   of an if-expression whose if-part is not a constant expression */
-const char *g = "string";
-ccp = &g + (g ? g-g : 0);
-/* HPUX 7.0 cc rejects these. */
-++ccp;
-p = (char**) ccp;
-ccp = (char const *const *) p;
-{ /* SCO 3.2v4 cc rejects this.  */
-  char *t;
-  char const *s = 0 ? (char *) 0 : (char const *) 0;
-
-  *t++ = 0;
-}
-{ /* Someone thinks the Sun supposedly-ANSI compiler will reject this.  */
-  int x[] = {25, 17};
-  const int *foo = &x[0];
-  ++foo;
-}
-{ /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
-  typedef const int *iptr;
-  iptr p = 0;
-  ++p;
-}
-{ /* AIX XL C 1.02.0.0 rejects this saying
-     "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
-  struct s { int j; const int *ap[3]; };
-  struct s *b; b->j = 5;
-}
-{ /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
-  const int foo = 10;
-}
-
-; return 0; }
-EOF
-if { (eval echo configure:1142: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_c_const=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_c_const=no
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_c_const" 1>&6
-if test $ac_cv_c_const = no; then
-  cat >> confdefs.h <<\EOF
-#define const 
-EOF
-
-fi
-
-echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:1163: checking for inline" >&5
-ijg_cv_inline=""
-cat > conftest.$ac_ext <<EOF
-#line 1166 "configure"
-#include "confdefs.h"
-
-int main() {
-} __inline__ int foo() { return 0; }
-int bar() { return foo();
-; return 0; }
-EOF
-if { (eval echo configure:1174: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ijg_cv_inline="__inline__"
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  cat > conftest.$ac_ext <<EOF
-#line 1182 "configure"
-#include "confdefs.h"
-
-int main() {
-} __inline int foo() { return 0; }
-int bar() { return foo();
-; return 0; }
-EOF
-if { (eval echo configure:1190: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ijg_cv_inline="__inline"
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  cat > conftest.$ac_ext <<EOF
-#line 1198 "configure"
-#include "confdefs.h"
-
-int main() {
-} inline int foo() { return 0; }
-int bar() { return foo();
-; return 0; }
-EOF
-if { (eval echo configure:1206: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ijg_cv_inline="inline"
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-fi
-rm -f conftest*
-fi
-rm -f conftest*
-fi
-rm -f conftest*
-echo "$ac_t""$ijg_cv_inline" 1>&6
-cat >> confdefs.h <<EOF
-#define INLINE $ijg_cv_inline
-EOF
-
-echo $ac_n "checking for broken incomplete types""... $ac_c" 1>&6
-echo "configure:1224: checking for broken incomplete types" >&5
-cat > conftest.$ac_ext <<EOF
-#line 1226 "configure"
-#include "confdefs.h"
- typedef struct undefined_structure * undef_struct_ptr; 
-int main() {
-
-; return 0; }
-EOF
-if { (eval echo configure:1233: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  echo "$ac_t""ok" 1>&6
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  echo "$ac_t""broken" 1>&6
-cat >> confdefs.h <<\EOF
-#define INCOMPLETE_TYPES_BROKEN 
-EOF
-
-fi
-rm -f conftest*
-echo $ac_n "checking for short external names""... $ac_c" 1>&6
-echo "configure:1248: checking for short external names" >&5
-cat > conftest.$ac_ext <<EOF
-#line 1250 "configure"
-#include "confdefs.h"
-
-int possibly_duplicate_function () { return 0; }
-int possibly_dupli_function () { return 1; }
-
-int main() {
- 
-; return 0; }
-EOF
-if { (eval echo configure:1260: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
-  rm -rf conftest*
-  echo "$ac_t""ok" 1>&6
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  echo "$ac_t""short" 1>&6
-cat >> confdefs.h <<\EOF
-#define NEED_SHORT_EXTERNAL_NAMES 
-EOF
-
-fi
-rm -f conftest*
-echo $ac_n "checking to see if char is signed""... $ac_c" 1>&6
-echo "configure:1275: checking to see if char is signed" >&5
-if test "$cross_compiling" = yes; then
-  echo Assuming that char is signed on target machine.
-echo If it is unsigned, this will be a little bit inefficient.
-
-else
-  cat > conftest.$ac_ext <<EOF
-#line 1282 "configure"
-#include "confdefs.h"
-
-#ifdef HAVE_PROTOTYPES
-int is_char_signed (int arg)
-#else
-int is_char_signed (arg)
-     int arg;
-#endif
-{
-  if (arg == 189) {		/* expected result for unsigned char */
-    return 0;			/* type char is unsigned */
-  }
-  else if (arg != -67) {	/* expected result for signed char */
-    printf("Hmm, it seems 'char' is not eight bits wide on your machine.\n");
-    printf("I fear the JPEG software will not work at all.\n\n");
-  }
-  return 1;			/* assume char is signed otherwise */
-}
-char signed_char_check = (char) (-67);
-main() {
-  exit(is_char_signed((int) signed_char_check));
-}
-EOF
-if { (eval echo configure:1306: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
-then
-  echo "$ac_t""no" 1>&6
-cat >> confdefs.h <<\EOF
-#define CHAR_IS_UNSIGNED 
-EOF
-
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -fr conftest*
-  echo "$ac_t""yes" 1>&6
-fi
-rm -fr conftest*
-fi
-
-echo $ac_n "checking to see if right shift is signed""... $ac_c" 1>&6
-echo "configure:1323: checking to see if right shift is signed" >&5
-if test "$cross_compiling" = yes; then
-  echo "$ac_t""Assuming that right shift is signed on target machine." 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 1328 "configure"
-#include "confdefs.h"
-
-#ifdef HAVE_PROTOTYPES
-int is_shifting_signed (long arg)
-#else
-int is_shifting_signed (arg)
-     long arg;
-#endif
-/* See whether right-shift on a long is signed or not. */
-{
-  long res = arg >> 4;
-
-  if (res == -0x7F7E80CL) {	/* expected result for signed shift */
-    return 1;			/* right shift is signed */
-  }
-  /* see if unsigned-shift hack will fix it. */
-  /* we can't just test exact value since it depends on width of long... */
-  res |= (~0L) << (32-4);
-  if (res == -0x7F7E80CL) {	/* expected result now? */
-    return 0;			/* right shift is unsigned */
-  }
-  printf("Right shift isn't acting as I expect it to.\n");
-  printf("I fear the JPEG software will not work at all.\n\n");
-  return 0;			/* try it with unsigned anyway */
-}
-main() {
-  exit(is_shifting_signed(-0x7F7E80B1L));
-}
-EOF
-if { (eval echo configure:1358: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
-then
-  echo "$ac_t""no" 1>&6
-cat >> confdefs.h <<\EOF
-#define RIGHT_SHIFT_IS_UNSIGNED 
-EOF
-
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -fr conftest*
-  echo "$ac_t""yes" 1>&6
-fi
-rm -fr conftest*
-fi
-
-echo $ac_n "checking to see if fopen accepts b spec""... $ac_c" 1>&6
-echo "configure:1375: checking to see if fopen accepts b spec" >&5
-if test "$cross_compiling" = yes; then
-  echo "$ac_t""Assuming that it does." 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 1380 "configure"
-#include "confdefs.h"
-
-#include <stdio.h>
-main() {
-  if (fopen("conftestdata", "wb") != NULL)
-    exit(0);
-  exit(1);
-}
-EOF
-if { (eval echo configure:1390: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
-then
-  echo "$ac_t""yes" 1>&6
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -fr conftest*
-  echo "$ac_t""no" 1>&6
-cat >> confdefs.h <<\EOF
-#define DONT_USE_B_MODE 
-EOF
-
-fi
-rm -fr conftest*
-fi
-
-ac_aux_dir=
-for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1436: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS="${IFS}:"
-  for ac_dir in $PATH; do
-    # Account for people who put trailing slashes in PATH elements.
-    case "$ac_dir/" in
-    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
-    *)
-      # OSF1 and SCO ODT 3.0 have their own names for install.
-      for ac_prog in ginstall installbsd scoinst install; do
-        if test -f $ac_dir/$ac_prog; then
-	  if test $ac_prog = install &&
-            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    # OSF/1 installbsd also uses dspmsg, but is usable.
-	    :
-	  else
-	    ac_cv_path_install="$ac_dir/$ac_prog -c"
-	    break 2
-	  fi
-	fi
-      done
-      ;;
-    esac
-  done
-  IFS="$ac_save_IFS"
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL="$ac_cv_path_install"
-  else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
-    INSTALL="$ac_install_sh"
-  fi
-fi
-echo "$ac_t""$INSTALL" 1>&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-# Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1488: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
-  for ac_dir in $PATH; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
-
-# Decide whether to use libtool,
-# and if so whether to build shared, static, or both flavors of library.
-LTSHARED="no"
-# Check whether --enable-shared or --disable-shared was given.
-if test "${enable_shared+set}" = set; then
-  enableval="$enable_shared"
-  LTSHARED="$enableval"
-fi
-
-LTSTATIC="no"
-# Check whether --enable-static or --disable-static was given.
-if test "${enable_static+set}" = set; then
-  enableval="$enable_static"
-  LTSTATIC="$enableval"
-fi
-
-if test "x$LTSHARED" != xno  -o  "x$LTSTATIC" != xno; then
-  USELIBTOOL="yes"
-  LIBTOOL="./libtool"
-  O="lo"
-  A="la"
-  LN='$(LIBTOOL) --mode=link $(CC)'
-  INSTALL_LIB='$(LIBTOOL) --mode=install ${INSTALL}'
-  INSTALL_PROGRAM="\$(LIBTOOL) --mode=install $INSTALL_PROGRAM"
-else
-  USELIBTOOL="no"
-  LIBTOOL=""
-  O="o"
-  A="a"
-  LN='$(CC)'
-  INSTALL_LIB="$INSTALL_DATA"
-fi
-
-
-
-
-
-
-# Configure libtool if needed.
-if test $USELIBTOOL = yes; then
-  disable_shared=
-  disable_static=
-  if test "x$LTSHARED" = xno; then
-    disable_shared="--disable-shared"
-  fi
-  if test "x$LTSTATIC" = xno; then
-    disable_static="--disable-static"
-  fi
-  $srcdir/ltconfig $disable_shared $disable_static $srcdir/ltmain.sh
-fi
-
-# Select memory manager depending on user input.
-# If no "-enable-maxmem", use jmemnobs
-MEMORYMGR='jmemnobs.$(O)'
-MAXMEM="no"
-# Check whether --enable-maxmem or --disable-maxmem was given.
-if test "${enable_maxmem+set}" = set; then
-  enableval="$enable_maxmem"
-  MAXMEM="$enableval"
-fi
-
-# support --with-maxmem for backwards compatibility with IJG V5.
-# Check whether --with-maxmem or --without-maxmem was given.
-if test "${with_maxmem+set}" = set; then
-  withval="$with_maxmem"
-  MAXMEM="$withval"
-fi
-
-if test "x$MAXMEM" = xyes; then
-  MAXMEM=1
-fi
-if test "x$MAXMEM" != xno; then
-  if test -n "`echo $MAXMEM | sed 's/[0-9]//g'`"; then
-    { echo "configure: error: non-numeric argument to --enable-maxmem" 1>&2; exit 1; }
-  fi
-  DEFAULTMAXMEM=`expr $MAXMEM \* 1048576`
-cat >> confdefs.h <<EOF
-#define DEFAULT_MAX_MEM ${DEFAULTMAXMEM}
-EOF
-
-echo $ac_n "checking for 'tmpfile()'""... $ac_c" 1>&6
-echo "configure:1596: checking for 'tmpfile()'" >&5
-cat > conftest.$ac_ext <<EOF
-#line 1598 "configure"
-#include "confdefs.h"
-#include <stdio.h>
-int main() {
- FILE * tfile = tmpfile(); 
-; return 0; }
-EOF
-if { (eval echo configure:1605: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
-  rm -rf conftest*
-  echo "$ac_t""yes" 1>&6
-MEMORYMGR='jmemansi.$(O)'
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  echo "$ac_t""no" 1>&6
-MEMORYMGR='jmemname.$(O)'
-cat >> confdefs.h <<\EOF
-#define NEED_SIGNAL_CATCHER 
-EOF
-
-echo $ac_n "checking for 'mktemp()'""... $ac_c" 1>&6
-echo "configure:1620: checking for 'mktemp()'" >&5
-cat > conftest.$ac_ext <<EOF
-#line 1622 "configure"
-#include "confdefs.h"
-
-int main() {
- char fname[80]; mktemp(fname); 
-; return 0; }
-EOF
-if { (eval echo configure:1629: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
-  rm -rf conftest*
-  echo "$ac_t""yes" 1>&6
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  echo "$ac_t""no" 1>&6
-cat >> confdefs.h <<\EOF
-#define NO_MKTEMP 
-EOF
-
-fi
-rm -f conftest*
-fi
-rm -f conftest*
-fi
-
-
-# Extract the library version ID from jpeglib.h.
-echo $ac_n "checking libjpeg version number""... $ac_c" 1>&6
-echo "configure:1650: checking libjpeg version number" >&5
-JPEG_LIB_VERSION=`sed -e '/^#define JPEG_LIB_VERSION/!d' -e 's/^[^0-9]*\([0-9][0-9]*\).*$/\1/' $srcdir/jpeglib.h`
-echo "$ac_t""$JPEG_LIB_VERSION" 1>&6
-
-
-# Prepare to massage makefile.cfg correctly.
-if test $ijg_cv_have_prototypes = yes; then
-  A2K_DEPS=""
-  COM_A2K="# "
-else
-  A2K_DEPS="ansi2knr"
-  COM_A2K=""
-fi
-
-
-# ansi2knr needs -DBSD if string.h is missing
-if test $ac_cv_header_string_h = no; then
-  ANSI2KNRFLAGS="-DBSD"
-else
-  ANSI2KNRFLAGS=""
-fi
-
-# Substitutions to enable or disable libtool-related stuff
-if test $USELIBTOOL = yes -a $ijg_cv_have_prototypes = yes; then
-  COM_LT=""
-else
-  COM_LT="# "
-fi
-
-if test "x$LTSHARED" != xno; then
-  FORCE_INSTALL_LIB="install-lib"
-else
-  FORCE_INSTALL_LIB=""
-fi
-
-# Set up -I directives
-if test "x$srcdir" = x.; then
-  INCLUDEFLAGS='-I$(srcdir)'
-else
-  INCLUDEFLAGS='-I. -I$(srcdir)'
-fi
-
-trap '' 1 2 15
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-DEFS=-DHAVE_CONFIG_H
-
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
-do
-  case "\$ac_option" in
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
-    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.12"
-    exit 0 ;;
-  -help | --help | --hel | --he | --h)
-    echo "\$ac_cs_usage"; exit 0 ;;
-  *) echo "\$ac_cs_usage"; exit 1 ;;
-  esac
-done
-
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile:makefile.cfg jconfig.h:jconfig.cfg" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@CC@%$CC%g
-s%@CPP@%$CPP%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@RANLIB@%$RANLIB%g
-s%@LIBTOOL@%$LIBTOOL%g
-s%@O@%$O%g
-s%@A@%$A%g
-s%@LN@%$LN%g
-s%@INSTALL_LIB@%$INSTALL_LIB%g
-s%@MEMORYMGR@%$MEMORYMGR%g
-s%@JPEG_LIB_VERSION@%$JPEG_LIB_VERSION%g
-s%@A2K_DEPS@%$A2K_DEPS%g
-s%@COM_A2K@%$COM_A2K%g
-s%@ANSI2KNRFLAGS@%$ANSI2KNRFLAGS%g
-s%@COM_LT@%$COM_LT%g
-s%@FORCE_INSTALL_LIB@%$FORCE_INSTALL_LIB%g
-s%@INCLUDEFLAGS@%$INCLUDEFLAGS%g
-
-CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
-  if test $ac_beg -gt 1; then
-    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
-  else
-    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
-  fi
-  if test ! -s conftest.s$ac_file; then
-    ac_more_lines=false
-    rm -f conftest.s$ac_file
-  else
-    if test -z "$ac_sed_cmds"; then
-      ac_sed_cmds="sed -f conftest.s$ac_file"
-    else
-      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
-    fi
-    ac_file=`expr $ac_file + 1`
-    ac_beg=$ac_end
-    ac_end=`expr $ac_end + $ac_max_sed_cmds`
-  fi
-done
-if test -z "$ac_sed_cmds"; then
-  ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile:makefile.cfg"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
-  # Remove last slash and all that follows it.  Not all systems have dirname.
-  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-    # The file is in a subdirectory.
-    test ! -d "$ac_dir" && mkdir "$ac_dir"
-    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
-    # A "../" for each directory in $ac_dir_suffix.
-    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
-  else
-    ac_dir_suffix= ac_dots=
-  fi
-
-  case "$ac_given_srcdir" in
-  .)  srcdir=.
-      if test -z "$ac_dots"; then top_srcdir=.
-      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
-  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
-  *) # Relative path.
-    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
-    top_srcdir="$ac_dots$ac_given_srcdir" ;;
-  esac
-
-  case "$ac_given_INSTALL" in
-  [/$]*) INSTALL="$ac_given_INSTALL" ;;
-  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
-  esac
-
-  echo creating "$ac_file"
-  rm -f "$ac_file"
-  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
-  case "$ac_file" in
-  *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
-  *) ac_comsub= ;;
-  esac
-
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
-
-# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
-# NAME is the cpp macro being defined and VALUE is the value it is being given.
-#
-# ac_d sets the value in "#define NAME VALUE" lines.
-ac_dA='s%^\([ 	]*\)#\([ 	]*define[ 	][ 	]*\)'
-ac_dB='\([ 	][ 	]*\)[^ 	]*%\1#\2'
-ac_dC='\3'
-ac_dD='%g'
-# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE".
-ac_uA='s%^\([ 	]*\)#\([ 	]*\)undef\([ 	][ 	]*\)'
-ac_uB='\([ 	]\)%\1#\2define\3'
-ac_uC=' '
-ac_uD='\4%g'
-# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
-ac_eA='s%^\([ 	]*\)#\([ 	]*\)undef\([ 	][ 	]*\)'
-ac_eB='$%\1#\2define\3'
-ac_eC=' '
-ac_eD='%g'
-
-if test "${CONFIG_HEADERS+set}" != set; then
-EOF
-cat >> $CONFIG_STATUS <<EOF
-  CONFIG_HEADERS="jconfig.h:jconfig.cfg"
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-fi
-for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
-       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
-  *) ac_file_in="${ac_file}.in" ;;
-  esac
-
-  echo creating $ac_file
-
-  rm -f conftest.frag conftest.in conftest.out
-  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
-  cat $ac_file_inputs > conftest.in
-
-EOF
-
-# Transform confdefs.h into a sed script conftest.vals that substitutes
-# the proper values into config.h.in to produce config.h.  And first:
-# Protect against being on the right side of a sed subst in config.status.
-# Protect against being in an unquoted here document in config.status.
-rm -f conftest.vals
-cat > conftest.hdr <<\EOF
-s/[\\&%]/\\&/g
-s%[\\$`]%\\&%g
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp
-s%ac_d%ac_u%gp
-s%ac_u%ac_e%gp
-EOF
-sed -n -f conftest.hdr confdefs.h > conftest.vals
-rm -f conftest.hdr
-
-# This sed command replaces #undef with comments.  This is necessary, for
-# example, in the case of _POSIX_SOURCE, which is predefined and required
-# on some systems where configure will not decide to define it.
-cat >> conftest.vals <<\EOF
-EOF
-
-# Break up conftest.vals because some shells have a limit on
-# the size of here documents, and old seds have small limits too.
-
-rm -f conftest.tail
-while :
-do
-  ac_lines=`grep -c . conftest.vals`
-  # grep -c gives empty output for an empty file on some AIX systems.
-  if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi
-  # Write a limited-size here document to conftest.frag.
-  echo '  cat > conftest.frag <<CEOF' >> $CONFIG_STATUS
-  sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS
-  echo 'CEOF
-  sed -f conftest.frag conftest.in > conftest.out
-  rm -f conftest.in
-  mv conftest.out conftest.in
-' >> $CONFIG_STATUS
-  sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail
-  rm -f conftest.vals
-  mv conftest.tail conftest.vals
-done
-rm -f conftest.vals
-
-cat >> $CONFIG_STATUS <<\EOF
-  rm -f conftest.frag conftest.h
-  echo "/* $ac_file.  Generated automatically by configure.  */" > conftest.h
-  cat conftest.in >> conftest.h
-  rm -f conftest.in
-  if cmp -s $ac_file conftest.h 2>/dev/null; then
-    echo "$ac_file is unchanged"
-    rm -f conftest.h
-  else
-    # Remove last slash and all that follows it.  Not all systems have dirname.
-      ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
-      if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
-      # The file is in a subdirectory.
-      test ! -d "$ac_dir" && mkdir "$ac_dir"
-    fi
-    rm -f $ac_file
-    mv conftest.h $ac_file
-  fi
-fi; done
-
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-
-exit 0
-EOF
-chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
-

Engine/lib/ljpeg/extras/djpeg.1

@@ -1,253 +0,0 @@
-.TH DJPEG 1 "22 August 1997"
-.SH NAME
-djpeg \- decompress a JPEG file to an image file
-.SH SYNOPSIS
-.B djpeg
-[
-.I options
-]
-[
-.I filename
-]
-.LP
-.SH DESCRIPTION
-.LP
-.B djpeg
-decompresses the named JPEG file, or the standard input if no file is named,
-and produces an image file on the standard output.  PBMPLUS (PPM/PGM), BMP,
-GIF, Targa, or RLE (Utah Raster Toolkit) output format can be selected.
-(RLE is supported only if the URT library is available.)
-.SH OPTIONS
-All switch names may be abbreviated; for example,
-.B \-grayscale
-may be written
-.B \-gray
-or
-.BR \-gr .
-Most of the "basic" switches can be abbreviated to as little as one letter.
-Upper and lower case are equivalent (thus
-.B \-BMP
-is the same as
-.BR \-bmp ).
-British spellings are also accepted (e.g.,
-.BR \-greyscale ),
-though for brevity these are not mentioned below.
-.PP
-The basic switches are:
-.TP
-.BI \-colors " N"
-Reduce image to at most N colors.  This reduces the number of colors used in
-the output image, so that it can be displayed on a colormapped display or
-stored in a colormapped file format.  For example, if you have an 8-bit
-display, you'd need to reduce to 256 or fewer colors.
-.TP
-.BI \-quantize " N"
-Same as
-.BR \-colors .
-.B \-colors
-is the recommended name,
-.B \-quantize
-is provided only for backwards compatibility.
-.TP
-.B \-fast
-Select recommended processing options for fast, low quality output.  (The
-default options are chosen for highest quality output.)  Currently, this is
-equivalent to \fB\-dct fast \-nosmooth \-onepass \-dither ordered\fR.
-.TP
-.B \-grayscale
-Force gray-scale output even if JPEG file is color.  Useful for viewing on
-monochrome displays; also,
-.B djpeg
-runs noticeably faster in this mode.
-.TP
-.BI \-scale " M/N"
-Scale the output image by a factor M/N.  Currently the scale factor must be
-1/1, 1/2, 1/4, or 1/8.  Scaling is handy if the image is larger than your
-screen; also,
-.B djpeg
-runs much faster when scaling down the output.
-.TP
-.B \-bmp
-Select BMP output format (Windows flavor).  8-bit colormapped format is
-emitted if
-.B \-colors
-or
-.B \-grayscale
-is specified, or if the JPEG file is gray-scale; otherwise, 24-bit full-color
-format is emitted.
-.TP
-.B \-gif
-Select GIF output format.  Since GIF does not support more than 256 colors,
-.B \-colors 256
-is assumed (unless you specify a smaller number of colors).
-.TP
-.B \-os2
-Select BMP output format (OS/2 1.x flavor).  8-bit colormapped format is
-emitted if
-.B \-colors
-or
-.B \-grayscale
-is specified, or if the JPEG file is gray-scale; otherwise, 24-bit full-color
-format is emitted.
-.TP
-.B \-pnm
-Select PBMPLUS (PPM/PGM) output format (this is the default format).
-PGM is emitted if the JPEG file is gray-scale or if
-.B \-grayscale
-is specified; otherwise PPM is emitted.
-.TP
-.B \-rle
-Select RLE output format.  (Requires URT library.)
-.TP
-.B \-targa
-Select Targa output format.  Gray-scale format is emitted if the JPEG file is
-gray-scale or if
-.B \-grayscale
-is specified; otherwise, colormapped format is emitted if
-.B \-colors
-is specified; otherwise, 24-bit full-color format is emitted.
-.PP
-Switches for advanced users:
-.TP
-.B \-dct int
-Use integer DCT method (default).
-.TP
-.B \-dct fast
-Use fast integer DCT (less accurate).
-.TP
-.B \-dct float
-Use floating-point DCT method.
-The float method is very slightly more accurate than the int method, but is
-much slower unless your machine has very fast floating-point hardware.  Also
-note that results of the floating-point method may vary slightly across
-machines, while the integer methods should give the same results everywhere.
-The fast integer method is much less accurate than the other two.
-.TP
-.B \-dither fs
-Use Floyd-Steinberg dithering in color quantization.
-.TP
-.B \-dither ordered
-Use ordered dithering in color quantization.
-.TP
-.B \-dither none
-Do not use dithering in color quantization.
-By default, Floyd-Steinberg dithering is applied when quantizing colors; this
-is slow but usually produces the best results.  Ordered dither is a compromise
-between speed and quality; no dithering is fast but usually looks awful.  Note
-that these switches have no effect unless color quantization is being done.
-Ordered dither is only available in
-.B \-onepass
-mode.
-.TP
-.BI \-map " file"
-Quantize to the colors used in the specified image file.  This is useful for
-producing multiple files with identical color maps, or for forcing a
-predefined set of colors to be used.  The
-.I file
-must be a GIF or PPM file. This option overrides
-.B \-colors
-and
-.BR \-onepass .
-.TP
-.B \-nosmooth
-Use a faster, lower-quality upsampling routine.
-.TP
-.B \-onepass
-Use one-pass instead of two-pass color quantization.  The one-pass method is
-faster and needs less memory, but it produces a lower-quality image.
-.B \-onepass
-is ignored unless you also say
-.B \-colors
-.IR N .
-Also, the one-pass method is always used for gray-scale output (the two-pass
-method is no improvement then).
-.TP
-.BI \-maxmemory " N"
-Set limit for amount of memory to use in processing large images.  Value is
-in thousands of bytes, or millions of bytes if "M" is attached to the
-number.  For example,
-.B \-max 4m
-selects 4000000 bytes.  If more space is needed, temporary files will be used.
-.TP
-.BI \-outfile " name"
-Send output image to the named file, not to standard output.
-.TP
-.B \-verbose
-Enable debug printout.  More
-.BR \-v 's
-give more output.  Also, version information is printed at startup.
-.TP
-.B \-debug
-Same as
-.BR \-verbose .
-.SH EXAMPLES
-.LP
-This example decompresses the JPEG file foo.jpg, quantizes it to
-256 colors, and saves the output in 8-bit BMP format in foo.bmp:
-.IP
-.B djpeg \-colors 256 \-bmp
-.I foo.jpg
-.B >
-.I foo.bmp
-.SH HINTS
-To get a quick preview of an image, use the
-.B \-grayscale
-and/or
-.B \-scale
-switches.
-.B \-grayscale \-scale 1/8
-is the fastest case.
-.PP
-Several options are available that trade off image quality to gain speed.
-.B \-fast
-turns on the recommended settings.
-.PP
-.B \-dct fast
-and/or
-.B \-nosmooth
-gain speed at a small sacrifice in quality.
-When producing a color-quantized image,
-.B \-onepass \-dither ordered
-is fast but much lower quality than the default behavior.
-.B \-dither none
-may give acceptable results in two-pass mode, but is seldom tolerable in
-one-pass mode.
-.PP
-If you are fortunate enough to have very fast floating point hardware,
-\fB\-dct float\fR may be even faster than \fB\-dct fast\fR.  But on most
-machines \fB\-dct float\fR is slower than \fB\-dct int\fR; in this case it is
-not worth using, because its theoretical accuracy advantage is too small to be
-significant in practice.
-.SH ENVIRONMENT
-.TP
-.B JPEGMEM
-If this environment variable is set, its value is the default memory limit.
-The value is specified as described for the
-.B \-maxmemory
-switch.
-.B JPEGMEM
-overrides the default value specified when the program was compiled, and
-itself is overridden by an explicit
-.BR \-maxmemory .
-.SH SEE ALSO
-.BR cjpeg (1),
-.BR jpegtran (1),
-.BR rdjpgcom (1),
-.BR wrjpgcom (1)
-.br
-.BR ppm (5),
-.BR pgm (5)
-.br
-Wallace, Gregory K.  "The JPEG Still Picture Compression Standard",
-Communications of the ACM, April 1991 (vol. 34, no. 4), pp. 30-44.
-.SH AUTHOR
-Independent JPEG Group
-.SH BUGS
-Arithmetic coding is not supported for legal reasons.
-.PP
-To avoid the Unisys LZW patent,
-.B djpeg
-produces uncompressed GIF files.  These are larger than they should be, but
-are readable by standard GIF decoders.
-.PP
-Still not as fast as we'd like.

Engine/lib/ljpeg/extras/djpeg.c

@@ -1,616 +0,0 @@
-/*
- * djpeg.c
- *
- * Copyright (C) 1991-1997, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains a command-line user interface for the JPEG decompressor.
- * It should work on any system with Unix- or MS-DOS-style command lines.
- *
- * Two different command line styles are permitted, depending on the
- * compile-time switch TWO_FILE_COMMANDLINE:
- *	djpeg [options]  inputfile outputfile
- *	djpeg [options]  [inputfile]
- * In the second style, output is always to standard output, which you'd
- * normally redirect to a file or pipe to some other program.  Input is
- * either from a named file or from standard input (typically redirected).
- * The second style is convenient on Unix but is unhelpful on systems that
- * don't support pipes.  Also, you MUST use the first style if your system
- * doesn't do binary I/O to stdin/stdout.
- * To simplify script writing, the "-outfile" switch is provided.  The syntax
- *	djpeg [options]  -outfile outputfile  inputfile
- * works regardless of which command line style is used.
- */
-
-#include "cdjpeg.h"		/* Common decls for cjpeg/djpeg applications */
-#include "jversion.h"		/* for version message */
-
-#include <ctype.h>		/* to declare isprint() */
-
-#ifdef USE_CCOMMAND		/* command-line reader for Macintosh */
-#ifdef __MWERKS__
-#include <SIOUX.h>              /* Metrowerks needs this */
-#include <console.h>		/* ... and this */
-#endif
-#ifdef THINK_C
-#include <console.h>		/* Think declares it here */
-#endif
-#endif
-
-
-/* Create the add-on message string table. */
-
-#define JMESSAGE(code,string)	string ,
-
-static const char * const cdjpeg_message_table[] = {
-#include "cderror.h"
-  NULL
-};
-
-
-/*
- * This list defines the known output image formats
- * (not all of which need be supported by a given version).
- * You can change the default output format by defining DEFAULT_FMT;
- * indeed, you had better do so if you undefine PPM_SUPPORTED.
- */
-
-typedef enum {
-	FMT_BMP,		/* BMP format (Windows flavor) */
-	FMT_GIF,		/* GIF format */
-	FMT_OS2,		/* BMP format (OS/2 flavor) */
-	FMT_PPM,		/* PPM/PGM (PBMPLUS formats) */
-	FMT_RLE,		/* RLE format */
-	FMT_TARGA,		/* Targa format */
-	FMT_TIFF		/* TIFF format */
-} IMAGE_FORMATS;
-
-#ifndef DEFAULT_FMT		/* so can override from CFLAGS in Makefile */
-#define DEFAULT_FMT	FMT_PPM
-#endif
-
-static IMAGE_FORMATS requested_fmt;
-
-
-/*
- * Argument-parsing code.
- * The switch parser is designed to be useful with DOS-style command line
- * syntax, ie, intermixed switches and file names, where only the switches
- * to the left of a given file name affect processing of that file.
- * The main program in this file doesn't actually use this capability...
- */
-
-
-static const char * progname;	/* program name for error messages */
-static char * outfilename;	/* for -outfile switch */
-
-
-LOCAL(void)
-usage (void)
-/* complain about bad command line */
-{
-  fprintf(stderr, "usage: %s [switches] ", progname);
-#ifdef TWO_FILE_COMMANDLINE
-  fprintf(stderr, "inputfile outputfile\n");
-#else
-  fprintf(stderr, "[inputfile]\n");
-#endif
-
-  fprintf(stderr, "Switches (names may be abbreviated):\n");
-  fprintf(stderr, "  -colors N      Reduce image to no more than N colors\n");
-  fprintf(stderr, "  -fast          Fast, low-quality processing\n");
-  fprintf(stderr, "  -grayscale     Force grayscale output\n");
-#ifdef IDCT_SCALING_SUPPORTED
-  fprintf(stderr, "  -scale M/N     Scale output image by fraction M/N, eg, 1/8\n");
-#endif
-#ifdef BMP_SUPPORTED
-  fprintf(stderr, "  -bmp           Select BMP output format (Windows style)%s\n",
-	  (DEFAULT_FMT == FMT_BMP ? " (default)" : ""));
-#endif
-#ifdef GIF_SUPPORTED
-  fprintf(stderr, "  -gif           Select GIF output format%s\n",
-	  (DEFAULT_FMT == FMT_GIF ? " (default)" : ""));
-#endif
-#ifdef BMP_SUPPORTED
-  fprintf(stderr, "  -os2           Select BMP output format (OS/2 style)%s\n",
-	  (DEFAULT_FMT == FMT_OS2 ? " (default)" : ""));
-#endif
-#ifdef PPM_SUPPORTED
-  fprintf(stderr, "  -pnm           Select PBMPLUS (PPM/PGM) output format%s\n",
-	  (DEFAULT_FMT == FMT_PPM ? " (default)" : ""));
-#endif
-#ifdef RLE_SUPPORTED
-  fprintf(stderr, "  -rle           Select Utah RLE output format%s\n",
-	  (DEFAULT_FMT == FMT_RLE ? " (default)" : ""));
-#endif
-#ifdef TARGA_SUPPORTED
-  fprintf(stderr, "  -targa         Select Targa output format%s\n",
-	  (DEFAULT_FMT == FMT_TARGA ? " (default)" : ""));
-#endif
-  fprintf(stderr, "Switches for advanced users:\n");
-#ifdef DCT_ISLOW_SUPPORTED
-  fprintf(stderr, "  -dct int       Use integer DCT method%s\n",
-	  (JDCT_DEFAULT == JDCT_ISLOW ? " (default)" : ""));
-#endif
-#ifdef DCT_IFAST_SUPPORTED
-  fprintf(stderr, "  -dct fast      Use fast integer DCT (less accurate)%s\n",
-	  (JDCT_DEFAULT == JDCT_IFAST ? " (default)" : ""));
-#endif
-#ifdef DCT_FLOAT_SUPPORTED
-  fprintf(stderr, "  -dct float     Use floating-point DCT method%s\n",
-	  (JDCT_DEFAULT == JDCT_FLOAT ? " (default)" : ""));
-#endif
-  fprintf(stderr, "  -dither fs     Use F-S dithering (default)\n");
-  fprintf(stderr, "  -dither none   Don't use dithering in quantization\n");
-  fprintf(stderr, "  -dither ordered  Use ordered dither (medium speed, quality)\n");
-#ifdef QUANT_2PASS_SUPPORTED
-  fprintf(stderr, "  -map FILE      Map to colors used in named image file\n");
-#endif
-  fprintf(stderr, "  -nosmooth      Don't use high-quality upsampling\n");
-#ifdef QUANT_1PASS_SUPPORTED
-  fprintf(stderr, "  -onepass       Use 1-pass quantization (fast, low quality)\n");
-#endif
-  fprintf(stderr, "  -maxmemory N   Maximum memory to use (in kbytes)\n");
-  fprintf(stderr, "  -outfile name  Specify name for output file\n");
-  fprintf(stderr, "  -verbose  or  -debug   Emit debug output\n");
-  exit(EXIT_FAILURE);
-}
-
-
-LOCAL(int)
-parse_switches (j_decompress_ptr cinfo, int argc, char **argv,
-		int last_file_arg_seen, boolean for_real)
-/* Parse optional switches.
- * Returns argv[] index of first file-name argument (== argc if none).
- * Any file names with indexes <= last_file_arg_seen are ignored;
- * they have presumably been processed in a previous iteration.
- * (Pass 0 for last_file_arg_seen on the first or only iteration.)
- * for_real is FALSE on the first (dummy) pass; we may skip any expensive
- * processing.
- */
-{
-  int argn;
-  char * arg;
-
-  /* Set up default JPEG parameters. */
-  requested_fmt = DEFAULT_FMT;	/* set default output file format */
-  outfilename = NULL;
-  cinfo->err->trace_level = 0;
-
-  /* Scan command line options, adjust parameters */
-
-  for (argn = 1; argn < argc; argn++) {
-    arg = argv[argn];
-    if (*arg != '-') {
-      /* Not a switch, must be a file name argument */
-      if (argn <= last_file_arg_seen) {
-	outfilename = NULL;	/* -outfile applies to just one input file */
-	continue;		/* ignore this name if previously processed */
-      }
-      break;			/* else done parsing switches */
-    }
-    arg++;			/* advance past switch marker character */
-
-    if (keymatch(arg, "bmp", 1)) {
-      /* BMP output format. */
-      requested_fmt = FMT_BMP;
-
-    } else if (keymatch(arg, "colors", 1) || keymatch(arg, "colours", 1) ||
-	       keymatch(arg, "quantize", 1) || keymatch(arg, "quantise", 1)) {
-      /* Do color quantization. */
-      int val;
-
-      if (++argn >= argc)	/* advance to next argument */
-	usage();
-      if (sscanf(argv[argn], "%d", &val) != 1)
-	usage();
-      cinfo->desired_number_of_colors = val;
-      cinfo->quantize_colors = TRUE;
-
-    } else if (keymatch(arg, "dct", 2)) {
-      /* Select IDCT algorithm. */
-      if (++argn >= argc)	/* advance to next argument */
-	usage();
-      if (keymatch(argv[argn], "int", 1)) {
-	cinfo->dct_method = JDCT_ISLOW;
-      } else if (keymatch(argv[argn], "fast", 2)) {
-	cinfo->dct_method = JDCT_IFAST;
-      } else if (keymatch(argv[argn], "float", 2)) {
-	cinfo->dct_method = JDCT_FLOAT;
-      } else
-	usage();
-
-    } else if (keymatch(arg, "dither", 2)) {
-      /* Select dithering algorithm. */
-      if (++argn >= argc)	/* advance to next argument */
-	usage();
-      if (keymatch(argv[argn], "fs", 2)) {
-	cinfo->dither_mode = JDITHER_FS;
-      } else if (keymatch(argv[argn], "none", 2)) {
-	cinfo->dither_mode = JDITHER_NONE;
-      } else if (keymatch(argv[argn], "ordered", 2)) {
-	cinfo->dither_mode = JDITHER_ORDERED;
-      } else
-	usage();
-
-    } else if (keymatch(arg, "debug", 1) || keymatch(arg, "verbose", 1)) {
-      /* Enable debug printouts. */
-      /* On first -d, print version identification */
-      static boolean printed_version = FALSE;
-
-      if (! printed_version) {
-	fprintf(stderr, "Independent JPEG Group's DJPEG, version %s\n%s\n",
-		JVERSION, JCOPYRIGHT);
-	printed_version = TRUE;
-      }
-      cinfo->err->trace_level++;
-
-    } else if (keymatch(arg, "fast", 1)) {
-      /* Select recommended processing options for quick-and-dirty output. */
-      cinfo->two_pass_quantize = FALSE;
-      cinfo->dither_mode = JDITHER_ORDERED;
-      if (! cinfo->quantize_colors) /* don't override an earlier -colors */
-	cinfo->desired_number_of_colors = 216;
-      cinfo->dct_method = JDCT_FASTEST;
-      cinfo->do_fancy_upsampling = FALSE;
-
-    } else if (keymatch(arg, "gif", 1)) {
-      /* GIF output format. */
-      requested_fmt = FMT_GIF;
-
-    } else if (keymatch(arg, "grayscale", 2) || keymatch(arg, "greyscale",2)) {
-      /* Force monochrome output. */
-      cinfo->out_color_space = JCS_GRAYSCALE;
-
-    } else if (keymatch(arg, "map", 3)) {
-      /* Quantize to a color map taken from an input file. */
-      if (++argn >= argc)	/* advance to next argument */
-	usage();
-      if (for_real) {		/* too expensive to do twice! */
-#ifdef QUANT_2PASS_SUPPORTED	/* otherwise can't quantize to supplied map */
-	FILE * mapfile;
-
-	if ((mapfile = fopen(argv[argn], READ_BINARY)) == NULL) {
-	  fprintf(stderr, "%s: can't open %s\n", progname, argv[argn]);
-	  exit(EXIT_FAILURE);
-	}
-	read_color_map(cinfo, mapfile);
-	fclose(mapfile);
-	cinfo->quantize_colors = TRUE;
-#else
-	ERREXIT(cinfo, JERR_NOT_COMPILED);
-#endif
-      }
-
-    } else if (keymatch(arg, "maxmemory", 3)) {
-      /* Maximum memory in Kb (or Mb with 'm'). */
-      long lval;
-      char ch = 'x';
-
-      if (++argn >= argc)	/* advance to next argument */
-	usage();
-      if (sscanf(argv[argn], "%ld%c", &lval, &ch) < 1)
-	usage();
-      if (ch == 'm' || ch == 'M')
-	lval *= 1000L;
-      cinfo->mem->max_memory_to_use = lval * 1000L;
-
-    } else if (keymatch(arg, "nosmooth", 3)) {
-      /* Suppress fancy upsampling */
-      cinfo->do_fancy_upsampling = FALSE;
-
-    } else if (keymatch(arg, "onepass", 3)) {
-      /* Use fast one-pass quantization. */
-      cinfo->two_pass_quantize = FALSE;
-
-    } else if (keymatch(arg, "os2", 3)) {
-      /* BMP output format (OS/2 flavor). */
-      requested_fmt = FMT_OS2;
-
-    } else if (keymatch(arg, "outfile", 4)) {
-      /* Set output file name. */
-      if (++argn >= argc)	/* advance to next argument */
-	usage();
-      outfilename = argv[argn];	/* save it away for later use */
-
-    } else if (keymatch(arg, "pnm", 1) || keymatch(arg, "ppm", 1)) {
-      /* PPM/PGM output format. */
-      requested_fmt = FMT_PPM;
-
-    } else if (keymatch(arg, "rle", 1)) {
-      /* RLE output format. */
-      requested_fmt = FMT_RLE;
-
-    } else if (keymatch(arg, "scale", 1)) {
-      /* Scale the output image by a fraction M/N. */
-      if (++argn >= argc)	/* advance to next argument */
-	usage();
-      if (sscanf(argv[argn], "%d/%d",
-		 &cinfo->scale_num, &cinfo->scale_denom) != 2)
-	usage();
-
-    } else if (keymatch(arg, "targa", 1)) {
-      /* Targa output format. */
-      requested_fmt = FMT_TARGA;
-
-    } else {
-      usage();			/* bogus switch */
-    }
-  }
-
-  return argn;			/* return index of next arg (file name) */
-}
-
-
-/*
- * Marker processor for COM and interesting APPn markers.
- * This replaces the library's built-in processor, which just skips the marker.
- * We want to print out the marker as text, to the extent possible.
- * Note this code relies on a non-suspending data source.
- */
-
-LOCAL(unsigned int)
-jpeg_getc (j_decompress_ptr cinfo)
-/* Read next byte */
-{
-  struct jpeg_source_mgr * datasrc = cinfo->src;
-
-  if (datasrc->bytes_in_buffer == 0) {
-    if (! (*datasrc->fill_input_buffer) (cinfo))
-      ERREXIT(cinfo, JERR_CANT_SUSPEND);
-  }
-  datasrc->bytes_in_buffer--;
-  return GETJOCTET(*datasrc->next_input_byte++);
-}
-
-
-METHODDEF(boolean)
-print_text_marker (j_decompress_ptr cinfo)
-{
-  boolean traceit = (cinfo->err->trace_level >= 1);
-  INT32 length;
-  unsigned int ch;
-  unsigned int lastch = 0;
-
-  length = jpeg_getc(cinfo) << 8;
-  length += jpeg_getc(cinfo);
-  length -= 2;			/* discount the length word itself */
-
-  if (traceit) {
-    if (cinfo->unread_marker == JPEG_COM)
-      fprintf(stderr, "Comment, length %ld:\n", (long) length);
-    else			/* assume it is an APPn otherwise */
-      fprintf(stderr, "APP%d, length %ld:\n",
-	      cinfo->unread_marker - JPEG_APP0, (long) length);
-  }
-
-  while (--length >= 0) {
-    ch = jpeg_getc(cinfo);
-    if (traceit) {
-      /* Emit the character in a readable form.
-       * Nonprintables are converted to \nnn form,
-       * while \ is converted to \\.
-       * Newlines in CR, CR/LF, or LF form will be printed as one newline.
-       */
-      if (ch == '\r') {
-	fprintf(stderr, "\n");
-      } else if (ch == '\n') {
-	if (lastch != '\r')
-	  fprintf(stderr, "\n");
-      } else if (ch == '\\') {
-	fprintf(stderr, "\\\\");
-      } else if (isprint(ch)) {
-	putc(ch, stderr);
-      } else {
-	fprintf(stderr, "\\%03o", ch);
-      }
-      lastch = ch;
-    }
-  }
-
-  if (traceit)
-    fprintf(stderr, "\n");
-
-  return TRUE;
-}
-
-
-/*
- * The main program.
- */
-
-int
-main (int argc, char **argv)
-{
-  struct jpeg_decompress_struct cinfo;
-  struct jpeg_error_mgr jerr;
-#ifdef PROGRESS_REPORT
-  struct cdjpeg_progress_mgr progress;
-#endif
-  int file_index;
-  djpeg_dest_ptr dest_mgr = NULL;
-  FILE * input_file;
-  FILE * output_file;
-  JDIMENSION num_scanlines;
-
-  /* On Mac, fetch a command line. */
-#ifdef USE_CCOMMAND
-  argc = ccommand(&argv);
-#endif
-
-  progname = argv[0];
-  if (progname == NULL || progname[0] == 0)
-    progname = "djpeg";		/* in case C library doesn't provide it */
-
-  /* Initialize the JPEG decompression object with default error handling. */
-  cinfo.err = jpeg_std_error(&jerr);
-  jpeg_create_decompress(&cinfo);
-  /* Add some application-specific error messages (from cderror.h) */
-  jerr.addon_message_table = cdjpeg_message_table;
-  jerr.first_addon_message = JMSG_FIRSTADDONCODE;
-  jerr.last_addon_message = JMSG_LASTADDONCODE;
-
-  /* Insert custom marker processor for COM and APP12.
-   * APP12 is used by some digital camera makers for textual info,
-   * so we provide the ability to display it as text.
-   * If you like, additional APPn marker types can be selected for display,
-   * but don't try to override APP0 or APP14 this way (see libjpeg.doc).
-   */
-  jpeg_set_marker_processor(&cinfo, JPEG_COM, print_text_marker);
-  jpeg_set_marker_processor(&cinfo, JPEG_APP0+12, print_text_marker);
-
-  /* Now safe to enable signal catcher. */
-#ifdef NEED_SIGNAL_CATCHER
-  enable_signal_catcher((j_common_ptr) &cinfo);
-#endif
-
-  /* Scan command line to find file names. */
-  /* It is convenient to use just one switch-parsing routine, but the switch
-   * values read here are ignored; we will rescan the switches after opening
-   * the input file.
-   * (Exception: tracing level set here controls verbosity for COM markers
-   * found during jpeg_read_header...)
-   */
-
-  file_index = parse_switches(&cinfo, argc, argv, 0, FALSE);
-
-#ifdef TWO_FILE_COMMANDLINE
-  /* Must have either -outfile switch or explicit output file name */
-  if (outfilename == NULL) {
-    if (file_index != argc-2) {
-      fprintf(stderr, "%s: must name one input and one output file\n",
-	      progname);
-      usage();
-    }
-    outfilename = argv[file_index+1];
-  } else {
-    if (file_index != argc-1) {
-      fprintf(stderr, "%s: must name one input and one output file\n",
-	      progname);
-      usage();
-    }
-  }
-#else
-  /* Unix style: expect zero or one file name */
-  if (file_index < argc-1) {
-    fprintf(stderr, "%s: only one input file\n", progname);
-    usage();
-  }
-#endif /* TWO_FILE_COMMANDLINE */
-
-  /* Open the input file. */
-  if (file_index < argc) {
-    if ((input_file = fopen(argv[file_index], READ_BINARY)) == NULL) {
-      fprintf(stderr, "%s: can't open %s\n", progname, argv[file_index]);
-      exit(EXIT_FAILURE);
-    }
-  } else {
-    /* default input file is stdin */
-    input_file = read_stdin();
-  }
-
-  /* Open the output file. */
-  if (outfilename != NULL) {
-    if ((output_file = fopen(outfilename, WRITE_BINARY)) == NULL) {
-      fprintf(stderr, "%s: can't open %s\n", progname, outfilename);
-      exit(EXIT_FAILURE);
-    }
-  } else {
-    /* default output file is stdout */
-    output_file = write_stdout();
-  }
-
-#ifdef PROGRESS_REPORT
-  start_progress_monitor((j_common_ptr) &cinfo, &progress);
-#endif
-
-  /* Specify data source for decompression */
-  jpeg_stdio_src(&cinfo, input_file);
-
-  /* Read file header, set default decompression parameters */
-  (void) jpeg_read_header(&cinfo, TRUE);
-
-  /* Adjust default decompression parameters by re-parsing the options */
-  file_index = parse_switches(&cinfo, argc, argv, 0, TRUE);
-
-  /* Initialize the output module now to let it override any crucial
-   * option settings (for instance, GIF wants to force color quantization).
-   */
-  switch (requested_fmt) {
-#ifdef BMP_SUPPORTED
-  case FMT_BMP:
-    dest_mgr = jinit_write_bmp(&cinfo, FALSE);
-    break;
-  case FMT_OS2:
-    dest_mgr = jinit_write_bmp(&cinfo, TRUE);
-    break;
-#endif
-#ifdef GIF_SUPPORTED
-  case FMT_GIF:
-    dest_mgr = jinit_write_gif(&cinfo);
-    break;
-#endif
-#ifdef PPM_SUPPORTED
-  case FMT_PPM:
-    dest_mgr = jinit_write_ppm(&cinfo);
-    break;
-#endif
-#ifdef RLE_SUPPORTED
-  case FMT_RLE:
-    dest_mgr = jinit_write_rle(&cinfo);
-    break;
-#endif
-#ifdef TARGA_SUPPORTED
-  case FMT_TARGA:
-    dest_mgr = jinit_write_targa(&cinfo);
-    break;
-#endif
-  default:
-    ERREXIT(&cinfo, JERR_UNSUPPORTED_FORMAT);
-    break;
-  }
-  dest_mgr->output_file = output_file;
-
-  /* Start decompressor */
-  (void) jpeg_start_decompress(&cinfo);
-
-  /* Write output file header */
-  (*dest_mgr->start_output) (&cinfo, dest_mgr);
-
-  /* Process data */
-  while (cinfo.output_scanline < cinfo.output_height) {
-    num_scanlines = jpeg_read_scanlines(&cinfo, dest_mgr->buffer,
-					dest_mgr->buffer_height);
-    (*dest_mgr->put_pixel_rows) (&cinfo, dest_mgr, num_scanlines);
-  }
-
-#ifdef PROGRESS_REPORT
-  /* Hack: count final pass as done in case finish_output does an extra pass.
-   * The library won't have updated completed_passes.
-   */
-  progress.pub.completed_passes = progress.pub.total_passes;
-#endif
-
-  /* Finish decompression and release memory.
-   * I must do it in this order because output module has allocated memory
-   * of lifespan JPOOL_IMAGE; it needs to finish before releasing memory.
-   */
-  (*dest_mgr->finish_output) (&cinfo, dest_mgr);
-  (void) jpeg_finish_decompress(&cinfo);
-  jpeg_destroy_decompress(&cinfo);
-
-  /* Close files, if we opened them */
-  if (input_file != stdin)
-    fclose(input_file);
-  if (output_file != stdout)
-    fclose(output_file);
-
-#ifdef PROGRESS_REPORT
-  end_progress_monitor((j_common_ptr) &cinfo);
-#endif
-
-  /* All done. */
-  exit(jerr.num_warnings ? EXIT_WARNING : EXIT_SUCCESS);
-  return 0;			/* suppress no-return-value warnings */
-}

Engine/lib/ljpeg/extras/example.c

@@ -1,433 +0,0 @@
-/*
- * example.c
- *
- * This file illustrates how to use the IJG code as a subroutine library
- * to read or write JPEG image files.  You should look at this code in
- * conjunction with the documentation file libjpeg.doc.
- *
- * This code will not do anything useful as-is, but it may be helpful as a
- * skeleton for constructing routines that call the JPEG library.  
- *
- * We present these routines in the same coding style used in the JPEG code
- * (ANSI function definitions, etc); but you are of course free to code your
- * routines in a different style if you prefer.
- */
-
-#include <stdio.h>
-
-/*
- * Include file for users of JPEG library.
- * You will need to have included system headers that define at least
- * the typedefs FILE and size_t before you can include jpeglib.h.
- * (stdio.h is sufficient on ANSI-conforming systems.)
- * You may also wish to include "jerror.h".
- */
-
-#include "jpeglib.h"
-
-/*
- * <setjmp.h> is used for the optional error recovery mechanism shown in
- * the second part of the example.
- */
-
-#include <setjmp.h>
-
-
-
-/******************** JPEG COMPRESSION SAMPLE INTERFACE *******************/
-
-/* This half of the example shows how to feed data into the JPEG compressor.
- * We present a minimal version that does not worry about refinements such
- * as error recovery (the JPEG code will just exit() if it gets an error).
- */
-
-
-/*
- * IMAGE DATA FORMATS:
- *
- * The standard input image format is a rectangular array of pixels, with
- * each pixel having the same number of "component" values (color channels).
- * Each pixel row is an array of JSAMPLEs (which typically are unsigned chars).
- * If you are working with color data, then the color values for each pixel
- * must be adjacent in the row; for example, R,G,B,R,G,B,R,G,B,... for 24-bit
- * RGB color.
- *
- * For this example, we'll assume that this data structure matches the way
- * our application has stored the image in memory, so we can just pass a
- * pointer to our image buffer.  In particular, let's say that the image is
- * RGB color and is described by:
- */
-
-extern JSAMPLE * image_buffer;	/* Points to large array of R,G,B-order data */
-extern int image_height;	/* Number of rows in image */
-extern int image_width;		/* Number of columns in image */
-
-
-/*
- * Sample routine for JPEG compression.  We assume that the target file name
- * and a compression quality factor are passed in.
- */
-
-GLOBAL(void)
-write_JPEG_file (char * filename, int quality)
-{
-  /* This struct contains the JPEG compression parameters and pointers to
-   * working space (which is allocated as needed by the JPEG library).
-   * It is possible to have several such structures, representing multiple
-   * compression/decompression processes, in existence at once.  We refer
-   * to any one struct (and its associated working data) as a "JPEG object".
-   */
-  struct jpeg_compress_struct cinfo;
-  /* This struct represents a JPEG error handler.  It is declared separately
-   * because applications often want to supply a specialized error handler
-   * (see the second half of this file for an example).  But here we just
-   * take the easy way out and use the standard error handler, which will
-   * print a message on stderr and call exit() if compression fails.
-   * Note that this struct must live as long as the main JPEG parameter
-   * struct, to avoid dangling-pointer problems.
-   */
-  struct jpeg_error_mgr jerr;
-  /* More stuff */
-  FILE * outfile;		/* target file */
-  JSAMPROW row_pointer[1];	/* pointer to JSAMPLE row[s] */
-  int row_stride;		/* physical row width in image buffer */
-
-  /* Step 1: allocate and initialize JPEG compression object */
-
-  /* We have to set up the error handler first, in case the initialization
-   * step fails.  (Unlikely, but it could happen if you are out of memory.)
-   * This routine fills in the contents of struct jerr, and returns jerr's
-   * address which we place into the link field in cinfo.
-   */
-  cinfo.err = jpeg_std_error(&jerr);
-  /* Now we can initialize the JPEG compression object. */
-  jpeg_create_compress(&cinfo);
-
-  /* Step 2: specify data destination (eg, a file) */
-  /* Note: steps 2 and 3 can be done in either order. */
-
-  /* Here we use the library-supplied code to send compressed data to a
-   * stdio stream.  You can also write your own code to do something else.
-   * VERY IMPORTANT: use "b" option to fopen() if you are on a machine that
-   * requires it in order to write binary files.
-   */
-  if ((outfile = fopen(filename, "wb")) == NULL) {
-    fprintf(stderr, "can't open %s\n", filename);
-    exit(1);
-  }
-  jpeg_stdio_dest(&cinfo, outfile);
-
-  /* Step 3: set parameters for compression */
-
-  /* First we supply a description of the input image.
-   * Four fields of the cinfo struct must be filled in:
-   */
-  cinfo.image_width = image_width; 	/* image width and height, in pixels */
-  cinfo.image_height = image_height;
-  cinfo.input_components = 3;		/* # of color components per pixel */
-  cinfo.in_color_space = JCS_RGB; 	/* colorspace of input image */
-  /* Now use the library's routine to set default compression parameters.
-   * (You must set at least cinfo.in_color_space before calling this,
-   * since the defaults depend on the source color space.)
-   */
-  jpeg_set_defaults(&cinfo);
-  /* Now you can set any non-default parameters you wish to.
-   * Here we just illustrate the use of quality (quantization table) scaling:
-   */
-  jpeg_set_quality(&cinfo, quality, TRUE /* limit to baseline-JPEG values */);
-
-  /* Step 4: Start compressor */
-
-  /* TRUE ensures that we will write a complete interchange-JPEG file.
-   * Pass TRUE unless you are very sure of what you're doing.
-   */
-  jpeg_start_compress(&cinfo, TRUE);
-
-  /* Step 5: while (scan lines remain to be written) */
-  /*           jpeg_write_scanlines(...); */
-
-  /* Here we use the library's state variable cinfo.next_scanline as the
-   * loop counter, so that we don't have to keep track ourselves.
-   * To keep things simple, we pass one scanline per call; you can pass
-   * more if you wish, though.
-   */
-  row_stride = image_width * 3;	/* JSAMPLEs per row in image_buffer */
-
-  while (cinfo.next_scanline < cinfo.image_height) {
-    /* jpeg_write_scanlines expects an array of pointers to scanlines.
-     * Here the array is only one element long, but you could pass
-     * more than one scanline at a time if that's more convenient.
-     */
-    row_pointer[0] = & image_buffer[cinfo.next_scanline * row_stride];
-    (void) jpeg_write_scanlines(&cinfo, row_pointer, 1);
-  }
-
-  /* Step 6: Finish compression */
-
-  jpeg_finish_compress(&cinfo);
-  /* After finish_compress, we can close the output file. */
-  fclose(outfile);
-
-  /* Step 7: release JPEG compression object */
-
-  /* This is an important step since it will release a good deal of memory. */
-  jpeg_destroy_compress(&cinfo);
-
-  /* And we're done! */
-}
-
-
-/*
- * SOME FINE POINTS:
- *
- * In the above loop, we ignored the return value of jpeg_write_scanlines,
- * which is the number of scanlines actually written.  We could get away
- * with this because we were only relying on the value of cinfo.next_scanline,
- * which will be incremented correctly.  If you maintain additional loop
- * variables then you should be careful to increment them properly.
- * Actually, for output to a stdio stream you needn't worry, because
- * then jpeg_write_scanlines will write all the lines passed (or else exit
- * with a fatal error).  Partial writes can only occur if you use a data
- * destination module that can demand suspension of the compressor.
- * (If you don't know what that's for, you don't need it.)
- *
- * If the compressor requires full-image buffers (for entropy-coding
- * optimization or a multi-scan JPEG file), it will create temporary
- * files for anything that doesn't fit within the maximum-memory setting.
- * (Note that temp files are NOT needed if you use the default parameters.)
- * On some systems you may need to set up a signal handler to ensure that
- * temporary files are deleted if the program is interrupted.  See libjpeg.doc.
- *
- * Scanlines MUST be supplied in top-to-bottom order if you want your JPEG
- * files to be compatible with everyone else's.  If you cannot readily read
- * your data in that order, you'll need an intermediate array to hold the
- * image.  See rdtarga.c or rdbmp.c for examples of handling bottom-to-top
- * source data using the JPEG code's internal virtual-array mechanisms.
- */
-
-
-
-/******************** JPEG DECOMPRESSION SAMPLE INTERFACE *******************/
-
-/* This half of the example shows how to read data from the JPEG decompressor.
- * It's a bit more refined than the above, in that we show:
- *   (a) how to modify the JPEG library's standard error-reporting behavior;
- *   (b) how to allocate workspace using the library's memory manager.
- *
- * Just to make this example a little different from the first one, we'll
- * assume that we do not intend to put the whole image into an in-memory
- * buffer, but to send it line-by-line someplace else.  We need a one-
- * scanline-high JSAMPLE array as a work buffer, and we will let the JPEG
- * memory manager allocate it for us.  This approach is actually quite useful
- * because we don't need to remember to deallocate the buffer separately: it
- * will go away automatically when the JPEG object is cleaned up.
- */
-
-
-/*
- * ERROR HANDLING:
- *
- * The JPEG library's standard error handler (jerror.c) is divided into
- * several "methods" which you can override individually.  This lets you
- * adjust the behavior without duplicating a lot of code, which you might
- * have to update with each future release.
- *
- * Our example here shows how to override the "error_exit" method so that
- * control is returned to the library's caller when a fatal error occurs,
- * rather than calling exit() as the standard error_exit method does.
- *
- * We use C's setjmp/longjmp facility to return control.  This means that the
- * routine which calls the JPEG library must first execute a setjmp() call to
- * establish the return point.  We want the replacement error_exit to do a
- * longjmp().  But we need to make the setjmp buffer accessible to the
- * error_exit routine.  To do this, we make a private extension of the
- * standard JPEG error handler object.  (If we were using C++, we'd say we
- * were making a subclass of the regular error handler.)
- *
- * Here's the extended error handler struct:
- */
-
-struct my_error_mgr {
-  struct jpeg_error_mgr pub;	/* "public" fields */
-
-  jmp_buf setjmp_buffer;	/* for return to caller */
-};
-
-typedef struct my_error_mgr * my_error_ptr;
-
-/*
- * Here's the routine that will replace the standard error_exit method:
- */
-
-METHODDEF(void)
-my_error_exit (j_common_ptr cinfo)
-{
-  /* cinfo->err really points to a my_error_mgr struct, so coerce pointer */
-  my_error_ptr myerr = (my_error_ptr) cinfo->err;
-
-  /* Always display the message. */
-  /* We could postpone this until after returning, if we chose. */
-  (*cinfo->err->output_message) (cinfo);
-
-  /* Return control to the setjmp point */
-  longjmp(myerr->setjmp_buffer, 1);
-}
-
-
-/*
- * Sample routine for JPEG decompression.  We assume that the source file name
- * is passed in.  We want to return 1 on success, 0 on error.
- */
-
-
-GLOBAL(int)
-read_JPEG_file (char * filename)
-{
-  /* This struct contains the JPEG decompression parameters and pointers to
-   * working space (which is allocated as needed by the JPEG library).
-   */
-  struct jpeg_decompress_struct cinfo;
-  /* We use our private extension JPEG error handler.
-   * Note that this struct must live as long as the main JPEG parameter
-   * struct, to avoid dangling-pointer problems.
-   */
-  struct my_error_mgr jerr;
-  /* More stuff */
-  FILE * infile;		/* source file */
-  JSAMPARRAY buffer;		/* Output row buffer */
-  int row_stride;		/* physical row width in output buffer */
-
-  /* In this example we want to open the input file before doing anything else,
-   * so that the setjmp() error recovery below can assume the file is open.
-   * VERY IMPORTANT: use "b" option to fopen() if you are on a machine that
-   * requires it in order to read binary files.
-   */
-
-  if ((infile = fopen(filename, "rb")) == NULL) {
-    fprintf(stderr, "can't open %s\n", filename);
-    return 0;
-  }
-
-  /* Step 1: allocate and initialize JPEG decompression object */
-
-  /* We set up the normal JPEG error routines, then override error_exit. */
-  cinfo.err = jpeg_std_error(&jerr.pub);
-  jerr.pub.error_exit = my_error_exit;
-  /* Establish the setjmp return context for my_error_exit to use. */
-  if (setjmp(jerr.setjmp_buffer)) {
-    /* If we get here, the JPEG code has signaled an error.
-     * We need to clean up the JPEG object, close the input file, and return.
-     */
-    jpeg_destroy_decompress(&cinfo);
-    fclose(infile);
-    return 0;
-  }
-  /* Now we can initialize the JPEG decompression object. */
-  jpeg_create_decompress(&cinfo);
-
-  /* Step 2: specify data source (eg, a file) */
-
-  jpeg_stdio_src(&cinfo, infile);
-
-  /* Step 3: read file parameters with jpeg_read_header() */
-
-  (void) jpeg_read_header(&cinfo, TRUE);
-  /* We can ignore the return value from jpeg_read_header since
-   *   (a) suspension is not possible with the stdio data source, and
-   *   (b) we passed TRUE to reject a tables-only JPEG file as an error.
-   * See libjpeg.doc for more info.
-   */
-
-  /* Step 4: set parameters for decompression */
-
-  /* In this example, we don't need to change any of the defaults set by
-   * jpeg_read_header(), so we do nothing here.
-   */
-
-  /* Step 5: Start decompressor */
-
-  (void) jpeg_start_decompress(&cinfo);
-  /* We can ignore the return value since suspension is not possible
-   * with the stdio data source.
-   */
-
-  /* We may need to do some setup of our own at this point before reading
-   * the data.  After jpeg_start_decompress() we have the correct scaled
-   * output image dimensions available, as well as the output colormap
-   * if we asked for color quantization.
-   * In this example, we need to make an output work buffer of the right size.
-   */ 
-  /* JSAMPLEs per row in output buffer */
-  row_stride = cinfo.output_width * cinfo.output_components;
-  /* Make a one-row-high sample array that will go away when done with image */
-  buffer = (*cinfo.mem->alloc_sarray)
-		((j_common_ptr) &cinfo, JPOOL_IMAGE, row_stride, 1);
-
-  /* Step 6: while (scan lines remain to be read) */
-  /*           jpeg_read_scanlines(...); */
-
-  /* Here we use the library's state variable cinfo.output_scanline as the
-   * loop counter, so that we don't have to keep track ourselves.
-   */
-  while (cinfo.output_scanline < cinfo.output_height) {
-    /* jpeg_read_scanlines expects an array of pointers to scanlines.
-     * Here the array is only one element long, but you could ask for
-     * more than one scanline at a time if that's more convenient.
-     */
-    (void) jpeg_read_scanlines(&cinfo, buffer, 1);
-    /* Assume put_scanline_someplace wants a pointer and sample count. */
-    put_scanline_someplace(buffer[0], row_stride);
-  }
-
-  /* Step 7: Finish decompression */
-
-  (void) jpeg_finish_decompress(&cinfo);
-  /* We can ignore the return value since suspension is not possible
-   * with the stdio data source.
-   */
-
-  /* Step 8: Release JPEG decompression object */
-
-  /* This is an important step since it will release a good deal of memory. */
-  jpeg_destroy_decompress(&cinfo);
-
-  /* After finish_decompress, we can close the input file.
-   * Here we postpone it until after no more JPEG errors are possible,
-   * so as to simplify the setjmp error logic above.  (Actually, I don't
-   * think that jpeg_destroy can do an error exit, but why assume anything...)
-   */
-  fclose(infile);
-
-  /* At this point you may want to check to see whether any corrupt-data
-   * warnings occurred (test whether jerr.pub.num_warnings is nonzero).
-   */
-
-  /* And we're done! */
-  return 1;
-}
-
-
-/*
- * SOME FINE POINTS:
- *
- * In the above code, we ignored the return value of jpeg_read_scanlines,
- * which is the number of scanlines actually read.  We could get away with
- * this because we asked for only one line at a time and we weren't using
- * a suspending data source.  See libjpeg.doc for more info.
- *
- * We cheated a bit by calling alloc_sarray() after jpeg_start_decompress();
- * we should have done it beforehand to ensure that the space would be
- * counted against the JPEG max_memory setting.  In some systems the above
- * code would risk an out-of-memory error.  However, in general we don't
- * know the output image dimensions before jpeg_start_decompress(), unless we
- * call jpeg_calc_output_dimensions().  See libjpeg.doc for more about this.
- *
- * Scanlines are returned in the same order as they appear in the JPEG file,
- * which is standardly top-to-bottom.  If you must emit data bottom-to-top,
- * you can use one of the virtual arrays provided by the JPEG memory manager
- * to invert the data.  See wrbmp.c for an example.
- *
- * As with compression, some operating modes may require temporary files.
- * On some systems you may need to set up a signal handler to ensure that
- * temporary files are deleted if the program is interrupted.  See libjpeg.doc.
- */

Engine/lib/ljpeg/extras/filelist.doc

@@ -1,210 +0,0 @@
-IJG JPEG LIBRARY:  FILE LIST
-
-Copyright (C) 1994-1998, Thomas G. Lane.
-This file is part of the Independent JPEG Group's software.
-For conditions of distribution and use, see the accompanying README file.
-
-
-Here is a road map to the files in the IJG JPEG distribution.  The
-distribution includes the JPEG library proper, plus two application
-programs ("cjpeg" and "djpeg") which use the library to convert JPEG
-files to and from some other popular image formats.  A third application
-"jpegtran" uses the library to do lossless conversion between different
-variants of JPEG.  There are also two stand-alone applications,
-"rdjpgcom" and "wrjpgcom".
-
-
-THE JPEG LIBRARY
-================
-
-Include files:
-
-jpeglib.h	JPEG library's exported data and function declarations.
-jconfig.h	Configuration declarations.  Note: this file is not present
-		in the distribution; it is generated during installation.
-jmorecfg.h	Additional configuration declarations; need not be changed
-		for a standard installation.
-jerror.h	Declares JPEG library's error and trace message codes.
-jinclude.h	Central include file used by all IJG .c files to reference
-		system include files.
-jpegint.h	JPEG library's internal data structures.
-jchuff.h	Private declarations for Huffman encoder modules.
-jdhuff.h	Private declarations for Huffman decoder modules.
-jdct.h		Private declarations for forward & reverse DCT subsystems.
-jmemsys.h	Private declarations for memory management subsystem.
-jversion.h	Version information.
-
-Applications using the library should include jpeglib.h (which in turn
-includes jconfig.h and jmorecfg.h).  Optionally, jerror.h may be included
-if the application needs to reference individual JPEG error codes.  The
-other include files are intended for internal use and would not normally
-be included by an application program.  (cjpeg/djpeg/etc do use jinclude.h,
-since its function is to improve portability of the whole IJG distribution.
-Most other applications will directly include the system include files they
-want, and hence won't need jinclude.h.)
-
-
-C source code files:
-
-These files contain most of the functions intended to be called directly by
-an application program:
-
-jcapimin.c	Application program interface: core routines for compression.
-jcapistd.c	Application program interface: standard compression.
-jdapimin.c	Application program interface: core routines for decompression.
-jdapistd.c	Application program interface: standard decompression.
-jcomapi.c	Application program interface routines common to compression
-		and decompression.
-jcparam.c	Compression parameter setting helper routines.
-jctrans.c	API and library routines for transcoding compression.
-jdtrans.c	API and library routines for transcoding decompression.
-
-Compression side of the library:
-
-jcinit.c	Initialization: determines which other modules to use.
-jcmaster.c	Master control: setup and inter-pass sequencing logic.
-jcmainct.c	Main buffer controller (preprocessor => JPEG compressor).
-jcprepct.c	Preprocessor buffer controller.
-jccoefct.c	Buffer controller for DCT coefficient buffer.
-jccolor.c	Color space conversion.
-jcsample.c	Downsampling.
-jcdctmgr.c	DCT manager (DCT implementation selection & control).
-jfdctint.c	Forward DCT using slow-but-accurate integer method.
-jfdctfst.c	Forward DCT using faster, less accurate integer method.
-jfdctflt.c	Forward DCT using floating-point arithmetic.
-jchuff.c	Huffman entropy coding for sequential JPEG.
-jcphuff.c	Huffman entropy coding for progressive JPEG.
-jcmarker.c	JPEG marker writing.
-jdatadst.c	Data destination manager for stdio output.
-
-Decompression side of the library:
-
-jdmaster.c	Master control: determines which other modules to use.
-jdinput.c	Input controller: controls input processing modules.
-jdmainct.c	Main buffer controller (JPEG decompressor => postprocessor).
-jdcoefct.c	Buffer controller for DCT coefficient buffer.
-jdpostct.c	Postprocessor buffer controller.
-jdmarker.c	JPEG marker reading.
-jdhuff.c	Huffman entropy decoding for sequential JPEG.
-jdphuff.c	Huffman entropy decoding for progressive JPEG.
-jddctmgr.c	IDCT manager (IDCT implementation selection & control).
-jidctint.c	Inverse DCT using slow-but-accurate integer method.
-jidctfst.c	Inverse DCT using faster, less accurate integer method.
-jidctflt.c	Inverse DCT using floating-point arithmetic.
-jidctred.c	Inverse DCTs with reduced-size outputs.
-jdsample.c	Upsampling.
-jdcolor.c	Color space conversion.
-jdmerge.c	Merged upsampling/color conversion (faster, lower quality).
-jquant1.c	One-pass color quantization using a fixed-spacing colormap.
-jquant2.c	Two-pass color quantization using a custom-generated colormap.
-		Also handles one-pass quantization to an externally given map.
-jdatasrc.c	Data source manager for stdio input.
-
-Support files for both compression and decompression:
-
-jerror.c	Standard error handling routines (application replaceable).
-jmemmgr.c	System-independent (more or less) memory management code.
-jutils.c	Miscellaneous utility routines.
-
-jmemmgr.c relies on a system-dependent memory management module.  The IJG
-distribution includes the following implementations of the system-dependent
-module:
-
-jmemnobs.c	"No backing store": assumes adequate virtual memory exists.
-jmemansi.c	Makes temporary files with ANSI-standard routine tmpfile().
-jmemname.c	Makes temporary files with program-generated file names.
-jmemdos.c	Custom implementation for MS-DOS (16-bit environment only):
-		can use extended and expanded memory as well as temp files.
-jmemmac.c	Custom implementation for Apple Macintosh.
-
-Exactly one of the system-dependent modules should be configured into an
-installed JPEG library (see install.doc for hints about which one to use).
-On unusual systems you may find it worthwhile to make a special
-system-dependent memory manager.
-
-
-Non-C source code files:
-
-jmemdosa.asm	80x86 assembly code support for jmemdos.c; used only in
-		MS-DOS-specific configurations of the JPEG library.
-
-
-CJPEG/DJPEG/JPEGTRAN
-====================
-
-Include files:
-
-cdjpeg.h	Declarations shared by cjpeg/djpeg/jpegtran modules.
-cderror.h	Additional error and trace message codes for cjpeg et al.
-transupp.h	Declarations for jpegtran support routines in transupp.c.
-
-C source code files:
-
-cjpeg.c		Main program for cjpeg.
-djpeg.c		Main program for djpeg.
-jpegtran.c	Main program for jpegtran.
-cdjpeg.c	Utility routines used by all three programs.
-rdcolmap.c	Code to read a colormap file for djpeg's "-map" switch.
-rdswitch.c	Code to process some of cjpeg's more complex switches.
-		Also used by jpegtran.
-transupp.c	Support code for jpegtran: lossless image manipulations.
-
-Image file reader modules for cjpeg:
-
-rdbmp.c		BMP file input.
-rdgif.c		GIF file input (now just a stub).
-rdppm.c		PPM/PGM file input.
-rdrle.c		Utah RLE file input.
-rdtarga.c	Targa file input.
-
-Image file writer modules for djpeg:
-
-wrbmp.c		BMP file output.
-wrgif.c		GIF file output (a mere shadow of its former self).
-wrppm.c		PPM/PGM file output.
-wrrle.c		Utah RLE file output.
-wrtarga.c	Targa file output.
-
-
-RDJPGCOM/WRJPGCOM
-=================
-
-C source code files:
-
-rdjpgcom.c	Stand-alone rdjpgcom application.
-wrjpgcom.c	Stand-alone wrjpgcom application.
-
-These programs do not depend on the IJG library.  They do use
-jconfig.h and jinclude.h, only to improve portability.
-
-
-ADDITIONAL FILES
-================
-
-Documentation (see README for a guide to the documentation files):
-
-README		Master documentation file.
-*.doc		Other documentation files.
-*.1		Documentation in Unix man page format.
-change.log	Version-to-version change highlights.
-example.c	Sample code for calling JPEG library.
-
-Configuration/installation files and programs (see install.doc for more info):
-
-configure	Unix shell script to perform automatic configuration.
-ltconfig	Support scripts for configure (from GNU libtool).
-ltmain.sh
-config.guess
-config.sub
-install-sh	Install shell script for those Unix systems lacking one.
-ckconfig.c	Program to generate jconfig.h on non-Unix systems.
-jconfig.doc	Template for making jconfig.h by hand.
-makefile.*	Sample makefiles for particular systems.
-jconfig.*	Sample jconfig.h for particular systems.
-ansi2knr.c	De-ANSIfier for pre-ANSI C compilers (courtesy of
-		L. Peter Deutsch and Aladdin Enterprises).
-
-Test files (see install.doc for test procedure):
-
-test*.*		Source and comparison files for confidence test.
-		These are binary image files, NOT text files.

Engine/lib/ljpeg/extras/install-sh

@@ -1,250 +0,0 @@
-#!/bin/sh
-#
-# install - install a program, script, or datafile
-# This comes from X11R5 (mit/util/scripts/install.sh).
-#
-# Copyright 1991 by the Massachusetts Institute of Technology
-#
-# Permission to use, copy, modify, distribute, and sell this software and its
-# documentation for any purpose is hereby granted without fee, provided that
-# the above copyright notice appear in all copies and that both that
-# copyright notice and this permission notice appear in supporting
-# documentation, and that the name of M.I.T. not be used in advertising or
-# publicity pertaining to distribution of the software without specific,
-# written prior permission.  M.I.T. makes no representations about the
-# suitability of this software for any purpose.  It is provided "as is"
-# without express or implied warranty.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.  It can only install one file at a time, a restriction
-# shared with many OS's install programs.
-
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
-
-
-# put in absolute paths if you don't have them in your path; or use env. vars.
-
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
-
-transformbasename=""
-transform_arg=""
-instcmd="$mvprog"
-chmodcmd="$chmodprog 0755"
-chowncmd=""
-chgrpcmd=""
-stripcmd=""
-rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=""
-dst=""
-dir_arg=""
-
-while [ x"$1" != x ]; do
-    case $1 in
-	-c) instcmd="$cpprog"
-	    shift
-	    continue;;
-
-	-d) dir_arg=true
-	    shift
-	    continue;;
-
-	-m) chmodcmd="$chmodprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-o) chowncmd="$chownprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-g) chgrpcmd="$chgrpprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-s) stripcmd="$stripprog"
-	    shift
-	    continue;;
-
-	-t=*) transformarg=`echo $1 | sed 's/-t=//'`
-	    shift
-	    continue;;
-
-	-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
-	    shift
-	    continue;;
-
-	*)  if [ x"$src" = x ]
-	    then
-		src=$1
-	    else
-		# this colon is to work around a 386BSD /bin/sh bug
-		:
-		dst=$1
-	    fi
-	    shift
-	    continue;;
-    esac
-done
-
-if [ x"$src" = x ]
-then
-	echo "install:	no input file specified"
-	exit 1
-else
-	true
-fi
-
-if [ x"$dir_arg" != x ]; then
-	dst=$src
-	src=""
-	
-	if [ -d $dst ]; then
-		instcmd=:
-	else
-		instcmd=mkdir
-	fi
-else
-
-# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
-# might cause directories to be created, which would be especially bad 
-# if $src (and thus $dsttmp) contains '*'.
-
-	if [ -f $src -o -d $src ]
-	then
-		true
-	else
-		echo "install:  $src does not exist"
-		exit 1
-	fi
-	
-	if [ x"$dst" = x ]
-	then
-		echo "install:	no destination specified"
-		exit 1
-	else
-		true
-	fi
-
-# If destination is a directory, append the input filename; if your system
-# does not like double slashes in filenames, you may need to add some logic
-
-	if [ -d $dst ]
-	then
-		dst="$dst"/`basename $src`
-	else
-		true
-	fi
-fi
-
-## this sed command emulates the dirname command
-dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
-
-# Make sure that the destination directory exists.
-#  this part is taken from Noah Friedman's mkinstalldirs script
-
-# Skip lots of stat calls in the usual case.
-if [ ! -d "$dstdir" ]; then
-defaultIFS='	
-'
-IFS="${IFS-${defaultIFS}}"
-
-oIFS="${IFS}"
-# Some sh's can't handle IFS=/ for some reason.
-IFS='%'
-set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
-IFS="${oIFS}"
-
-pathcomp=''
-
-while [ $# -ne 0 ] ; do
-	pathcomp="${pathcomp}${1}"
-	shift
-
-	if [ ! -d "${pathcomp}" ] ;
-        then
-		$mkdirprog "${pathcomp}"
-	else
-		true
-	fi
-
-	pathcomp="${pathcomp}/"
-done
-fi
-
-if [ x"$dir_arg" != x ]
-then
-	$doit $instcmd $dst &&
-
-	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
-	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
-	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
-	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
-else
-
-# If we're going to rename the final executable, determine the name now.
-
-	if [ x"$transformarg" = x ] 
-	then
-		dstfile=`basename $dst`
-	else
-		dstfile=`basename $dst $transformbasename | 
-			sed $transformarg`$transformbasename
-	fi
-
-# don't allow the sed command to completely eliminate the filename
-
-	if [ x"$dstfile" = x ] 
-	then
-		dstfile=`basename $dst`
-	else
-		true
-	fi
-
-# Make a temp file name in the proper directory.
-
-	dsttmp=$dstdir/#inst.$$#
-
-# Move or copy the file name to the temp name
-
-	$doit $instcmd $src $dsttmp &&
-
-	trap "rm -f ${dsttmp}" 0 &&
-
-# and set any options; do chmod last to preserve setuid bits
-
-# If any of these fail, we abort the whole thing.  If we want to
-# ignore errors from any of these, just make sure not to ignore
-# errors from the above "$doit $instcmd $src $dsttmp" command.
-
-	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
-	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
-	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
-	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
-
-# Now rename the file to the real destination.
-
-	$doit $rmcmd -f $dstdir/$dstfile &&
-	$doit $mvcmd $dsttmp $dstdir/$dstfile 
-
-fi &&
-
-
-exit 0

Engine/lib/ljpeg/extras/install.doc

@@ -1,1063 +0,0 @@
-INSTALLATION INSTRUCTIONS for the Independent JPEG Group's JPEG software
-
-Copyright (C) 1991-1998, Thomas G. Lane.
-This file is part of the Independent JPEG Group's software.
-For conditions of distribution and use, see the accompanying README file.
-
-
-This file explains how to configure and install the IJG software.  We have
-tried to make this software extremely portable and flexible, so that it can be
-adapted to almost any environment.  The downside of this decision is that the
-installation process is complicated.  We have provided shortcuts to simplify
-the task on common systems.  But in any case, you will need at least a little
-familiarity with C programming and program build procedures for your system.
-
-If you are only using this software as part of a larger program, the larger
-program's installation procedure may take care of configuring the IJG code.
-For example, Ghostscript's installation script will configure the IJG code.
-You don't need to read this file if you just want to compile Ghostscript.
-
-If you are on a Unix machine, you may not need to read this file at all.
-Try doing
-	./configure
-	make
-	make test
-If that doesn't complain, do
-	make install
-(better do "make -n install" first to see if the makefile will put the files
-where you want them).  Read further if you run into snags or want to customize
-the code for your system.
-
-
-TABLE OF CONTENTS
------------------
-
-Before you start
-Configuring the software:
-	using the automatic "configure" script
-	using one of the supplied jconfig and makefile files
-	by hand
-Building the software
-Testing the software
-Installing the software
-Optional stuff
-Optimization
-Hints for specific systems
-
-
-BEFORE YOU START
-================
-
-Before installing the software you must unpack the distributed source code.
-Since you are reading this file, you have probably already succeeded in this
-task.  However, there is a potential for error if you needed to convert the
-files to the local standard text file format (for example, if you are on
-MS-DOS you may have converted LF end-of-line to CR/LF).  You must apply
-such conversion to all the files EXCEPT those whose names begin with "test".
-The test files contain binary data; if you change them in any way then the
-self-test will give bad results.
-
-Please check the last section of this file to see if there are hints for the
-specific machine or compiler you are using.
-
-
-CONFIGURING THE SOFTWARE
-========================
-
-To configure the IJG code for your system, you need to create two files:
-  * jconfig.h: contains values for system-dependent #define symbols.
-  * Makefile: controls the compilation process.
-(On a non-Unix machine, you may create "project files" or some other
-substitute for a Makefile.  jconfig.h is needed in any environment.)
-
-We provide three different ways to generate these files:
-  * On a Unix system, you can just run the "configure" script.
-  * We provide sample jconfig files and makefiles for popular machines;
-    if your machine matches one of the samples, just copy the right sample
-    files to jconfig.h and Makefile.
-  * If all else fails, read the instructions below and make your own files.
-
-
-Configuring the software using the automatic "configure" script
----------------------------------------------------------------
-
-If you are on a Unix machine, you can just type
-	./configure
-and let the configure script construct appropriate configuration files.
-If you're using "csh" on an old version of System V, you might need to type
-	sh configure
-instead to prevent csh from trying to execute configure itself.
-Expect configure to run for a few minutes, particularly on slower machines;
-it works by compiling a series of test programs.
-
-Configure was created with GNU Autoconf and it follows the usual conventions
-for GNU configure scripts.  It makes a few assumptions that you may want to
-override.  You can do this by providing optional switches to configure:
-
-* If you want to build libjpeg as a shared library, say
-	./configure --enable-shared
-To get both shared and static libraries, say
-	./configure --enable-shared --enable-static
-Note that these switches invoke GNU libtool to take care of system-dependent
-shared library building methods.  If things don't work this way, please try
-running configure without either switch; that should build a static library
-without using libtool.  If that works, your problem is probably with libtool
-not with the IJG code.  libtool is fairly new and doesn't support all flavors
-of Unix yet.  (You might be able to find a newer version of libtool than the
-one included with libjpeg; see ftp.gnu.org.  Report libtool problems to
[email protected].)
-
-* Configure will use gcc (GNU C compiler) if it's available, otherwise cc.
-To force a particular compiler to be selected, use the CC option, for example
-	./configure CC='cc'
-The same method can be used to include any unusual compiler switches.
-For example, on HP-UX you probably want to say
-	./configure CC='cc -Aa'
-to get HP's compiler to run in ANSI mode.
-
-* The default CFLAGS setting is "-O" for non-gcc compilers, "-O2" for gcc.
-You can override this by saying, for example,
-	./configure CFLAGS='-g'
-if you want to compile with debugging support.
-
-* Configure will set up the makefile so that "make install" will install files
-into /usr/local/bin, /usr/local/man, etc.  You can specify an installation
-prefix other than "/usr/local" by giving configure the option "--prefix=PATH".
-
-* If you don't have a lot of swap space, you may need to enable the IJG
-software's internal virtual memory mechanism.  To do this, give the option
-"--enable-maxmem=N" where N is the default maxmemory limit in megabytes.
-This is discussed in more detail under "Selecting a memory manager", below.
-You probably don't need to worry about this on reasonably-sized Unix machines,
-unless you plan to process very large images.
-
-Configure has some other features that are useful if you are cross-compiling
-or working in a network of multiple machine types; but if you need those
-features, you probably already know how to use them.
-
-
-Configuring the software using one of the supplied jconfig and makefile files
------------------------------------------------------------------------------
-
-If you have one of these systems, you can just use the provided configuration
-files:
-
-Makefile	jconfig file	System and/or compiler
-
-makefile.manx	jconfig.manx	Amiga, Manx Aztec C
-makefile.sas	jconfig.sas	Amiga, SAS C
-makeproj.mac	jconfig.mac	Apple Macintosh, Metrowerks CodeWarrior
-mak*jpeg.st	jconfig.st	Atari ST/STE/TT, Pure C or Turbo C
-makefile.bcc	jconfig.bcc	MS-DOS or OS/2, Borland C
-makefile.dj	jconfig.dj	MS-DOS, DJGPP (Delorie's port of GNU C)
-makefile.mc6	jconfig.mc6	MS-DOS, Microsoft C (16-bit only)
-makefile.wat	jconfig.wat	MS-DOS, OS/2, or Windows NT, Watcom C
-makefile.vc	jconfig.vc	Windows NT/95, MS Visual C++
-make*.ds	jconfig.vc	Windows NT/95, MS Developer Studio
-makefile.mms	jconfig.vms	Digital VMS, with MMS software
-makefile.vms	jconfig.vms	Digital VMS, without MMS software
-
-Copy the proper jconfig file to jconfig.h and the makefile to Makefile (or
-whatever your system uses as the standard makefile name).  For more info see
-the appropriate system-specific hints section near the end of this file.
-
-
-Configuring the software by hand
---------------------------------
-
-First, generate a jconfig.h file.  If you are moderately familiar with C,
-the comments in jconfig.doc should be enough information to do this; just
-copy jconfig.doc to jconfig.h and edit it appropriately.  Otherwise, you may
-prefer to use the ckconfig.c program.  You will need to compile and execute
-ckconfig.c by hand --- we hope you know at least enough to do that.
-ckconfig.c may not compile the first try (in fact, the whole idea is for it
-to fail if anything is going to).  If you get compile errors, fix them by
-editing ckconfig.c according to the directions given in ckconfig.c.  Once
-you get it to run, it will write a suitable jconfig.h file, and will also
-print out some advice about which makefile to use.
-
-You may also want to look at the canned jconfig files, if there is one for a
-system similar to yours.
-
-Second, select a makefile and copy it to Makefile (or whatever your system
-uses as the standard makefile name).  The most generic makefiles we provide
-are
-	makefile.ansi:	if your C compiler supports function prototypes
-	makefile.unix:	if not.
-(You have function prototypes if ckconfig.c put "#define HAVE_PROTOTYPES"
-in jconfig.h.)  You may want to start from one of the other makefiles if
-there is one for a system similar to yours.
-
-Look over the selected Makefile and adjust options as needed.  In particular
-you may want to change the CC and CFLAGS definitions.  For instance, if you
-are using GCC, set CC=gcc.  If you had to use any compiler switches to get
-ckconfig.c to work, make sure the same switches are in CFLAGS.
-
-If you are on a system that doesn't use makefiles, you'll need to set up
-project files (or whatever you do use) to compile all the source files and
-link them into executable files cjpeg, djpeg, jpegtran, rdjpgcom, and wrjpgcom.
-See the file lists in any of the makefiles to find out which files go into
-each program.  Note that the provided makefiles all make a "library" file
-libjpeg first, but you don't have to do that if you don't want to; the file
-lists identify which source files are actually needed for compression,
-decompression, or both.  As a last resort, you can make a batch script that
-just compiles everything and links it all together; makefile.vms is an example
-of this (it's for VMS systems that have no make-like utility).
-
-Here are comments about some specific configuration decisions you'll
-need to make:
-
-Command line style
-------------------
-
-These programs can use a Unix-like command line style which supports
-redirection and piping, like this:
-	cjpeg inputfile >outputfile
-	cjpeg <inputfile >outputfile
-	source program | cjpeg >outputfile
-The simpler "two file" command line style is just
-	cjpeg inputfile outputfile
-You may prefer the two-file style, particularly if you don't have pipes.
-
-You MUST use two-file style on any system that doesn't cope well with binary
-data fed through stdin/stdout; this is true for some MS-DOS compilers, for
-example.  If you're not on a Unix system, it's safest to assume you need
-two-file style.  (But if your compiler provides either the Posix-standard
-fdopen() library routine or a Microsoft-compatible setmode() routine, you
-can safely use the Unix command line style, by defining USE_FDOPEN or
-USE_SETMODE respectively.)
-
-To use the two-file style, make jconfig.h say "#define TWO_FILE_COMMANDLINE".
-
-Selecting a memory manager
---------------------------
-
-The IJG code is capable of working on images that are too big to fit in main
-memory; data is swapped out to temporary files as necessary.  However, the
-code to do this is rather system-dependent.  We provide five different
-memory managers:
-
-* jmemansi.c	This version uses the ANSI-standard library routine tmpfile(),
-		which not all non-ANSI systems have.  On some systems
-		tmpfile() may put the temporary file in a non-optimal
-		location; if you don't like what it does, use jmemname.c.
-
-* jmemname.c	This version creates named temporary files.  For anything
-		except a Unix machine, you'll need to configure the
-		select_file_name() routine appropriately; see the comments
-		near the head of jmemname.c.  If you use this version, define
-		NEED_SIGNAL_CATCHER in jconfig.h to make sure the temp files
-		are removed if the program is aborted.
-
-* jmemnobs.c	(That stands for No Backing Store :-).)  This will compile on
-		almost any system, but it assumes you have enough main memory
-		or virtual memory to hold the biggest images you work with.
-
-* jmemdos.c	This should be used with most 16-bit MS-DOS compilers.
-		See the system-specific notes about MS-DOS for more info.
-		IMPORTANT: if you use this, define USE_MSDOS_MEMMGR in
-		jconfig.h, and include the assembly file jmemdosa.asm in the
-		programs.  The supplied makefiles and jconfig files for
-		16-bit MS-DOS compilers already do both.
-
-* jmemmac.c	Custom version for Apple Macintosh; see the system-specific
-		notes for Macintosh for more info.
-
-To use a particular memory manager, change the SYSDEPMEM variable in your
-makefile to equal the corresponding object file name (for example, jmemansi.o
-or jmemansi.obj for jmemansi.c).
-
-If you have plenty of (real or virtual) main memory, just use jmemnobs.c.
-"Plenty" means about ten bytes for every pixel in the largest images
-you plan to process, so a lot of systems don't meet this criterion.
-If yours doesn't, try jmemansi.c first.  If that doesn't compile, you'll have
-to use jmemname.c; be sure to adjust select_file_name() for local conditions.
-You may also need to change unlink() to remove() in close_backing_store().
-
-Except with jmemnobs.c or jmemmac.c, you need to adjust the DEFAULT_MAX_MEM
-setting to a reasonable value for your system (either by adding a #define for
-DEFAULT_MAX_MEM to jconfig.h, or by adding a -D switch to the Makefile).
-This value limits the amount of data space the program will attempt to
-allocate.  Code and static data space isn't counted, so the actual memory
-needs for cjpeg or djpeg are typically 100 to 150Kb more than the max-memory
-setting.  Larger max-memory settings reduce the amount of I/O needed to
-process a large image, but too large a value can result in "insufficient
-memory" failures.  On most Unix machines (and other systems with virtual
-memory), just set DEFAULT_MAX_MEM to several million and forget it.  At the
-other end of the spectrum, for MS-DOS machines you probably can't go much
-above 300K to 400K.  (On MS-DOS the value refers to conventional memory only.
-Extended/expanded memory is handled separately by jmemdos.c.)
-
-
-BUILDING THE SOFTWARE
-=====================
-
-Now you should be able to compile the software.  Just say "make" (or
-whatever's necessary to start the compilation).  Have a cup of coffee.
-
-Here are some things that could go wrong:
-
-If your compiler complains about undefined structures, you should be able to
-shut it up by putting "#define INCOMPLETE_TYPES_BROKEN" in jconfig.h.
-
-If you have trouble with missing system include files or inclusion of the
-wrong ones, read jinclude.h.  This shouldn't happen if you used configure
-or ckconfig.c to set up jconfig.h.
-
-There are a fair number of routines that do not use all of their parameters;
-some compilers will issue warnings about this, which you can ignore.  There
-are also a few configuration checks that may give "unreachable code" warnings.
-Any other warning deserves investigation.
-
-If you don't have a getenv() library routine, define NO_GETENV.
-
-Also see the system-specific hints, below.
-
-
-TESTING THE SOFTWARE
-====================
-
-As a quick test of functionality we've included a small sample image in
-several forms:
-	testorig.jpg	Starting point for the djpeg tests.
-	testimg.ppm	The output of djpeg testorig.jpg
-	testimg.bmp	The output of djpeg -bmp -colors 256 testorig.jpg
-	testimg.jpg	The output of cjpeg testimg.ppm
-	testprog.jpg	Progressive-mode equivalent of testorig.jpg.
-	testimgp.jpg	The output of cjpeg -progressive -optimize testimg.ppm
-(The first- and second-generation .jpg files aren't identical since JPEG is
-lossy.)  If you can generate duplicates of the testimg* files then you
-probably have working programs.
-
-With most of the makefiles, "make test" will perform the necessary
-comparisons.
-
-If you're using a makefile that doesn't provide the test option, run djpeg
-and cjpeg by hand and compare the output files to testimg* with whatever
-binary file comparison tool you have.  The files should be bit-for-bit
-identical.
-
-If the programs complain "MAX_ALLOC_CHUNK is wrong, please fix", then you
-need to reduce MAX_ALLOC_CHUNK to a value that fits in type size_t.
-Try adding "#define MAX_ALLOC_CHUNK 65520L" to jconfig.h.  A less likely
-configuration error is "ALIGN_TYPE is wrong, please fix": defining ALIGN_TYPE
-as long should take care of that one.
-
-If the cjpeg test run fails with "Missing Huffman code table entry", it's a
-good bet that you needed to define RIGHT_SHIFT_IS_UNSIGNED.  Go back to the
-configuration step and run ckconfig.c.  (This is a good plan for any other
-test failure, too.)
-
-If you are using Unix (one-file) command line style on a non-Unix system,
-it's a good idea to check that binary I/O through stdin/stdout actually
-works.  You should get the same results from "djpeg <testorig.jpg >out.ppm"
-as from "djpeg -outfile out.ppm testorig.jpg".  Note that the makefiles all
-use the latter style and therefore do not exercise stdin/stdout!  If this
-check fails, try recompiling with USE_SETMODE or USE_FDOPEN defined.
-If it still doesn't work, better use two-file style.
-
-If you chose a memory manager other than jmemnobs.c, you should test that
-temporary-file usage works.  Try "djpeg -bmp -colors 256 -max 0 testorig.jpg"
-and make sure its output matches testimg.bmp.  If you have any really large
-images handy, try compressing them with -optimize and/or decompressing with
--colors 256 to make sure your DEFAULT_MAX_MEM setting is not too large.
-
-NOTE: this is far from an exhaustive test of the JPEG software; some modules,
-such as 1-pass color quantization, are not exercised at all.  It's just a
-quick test to give you some confidence that you haven't missed something
-major.
-
-
-INSTALLING THE SOFTWARE
-=======================
-
-Once you're done with the above steps, you can install the software by
-copying the executable files (cjpeg, djpeg, jpegtran, rdjpgcom, and wrjpgcom)
-to wherever you normally install programs.  On Unix systems, you'll also want
-to put the man pages (cjpeg.1, djpeg.1, jpegtran.1, rdjpgcom.1, wrjpgcom.1)
-in the man-page directory.  The pre-fab makefiles don't support this step
-since there's such a wide variety of installation procedures on different
-systems.
-
-If you generated a Makefile with the "configure" script, you can just say
-	make install
-to install the programs and their man pages into the standard places.
-(You'll probably need to be root to do this.)  We recommend first saying
-	make -n install
-to see where configure thought the files should go.  You may need to edit
-the Makefile, particularly if your system's conventions for man page
-filenames don't match what configure expects.
-
-If you want to install the IJG library itself, for use in compiling other
-programs besides ours, then you need to put the four include files
-	jpeglib.h jerror.h jconfig.h jmorecfg.h
-into your include-file directory, and put the library file libjpeg.a
-(extension may vary depending on system) wherever library files go.
-If you generated a Makefile with "configure", it will do what it thinks
-is the right thing if you say
-	make install-lib
-
-
-OPTIONAL STUFF
-==============
-
-Progress monitor:
-
-If you like, you can #define PROGRESS_REPORT (in jconfig.h) to enable display
-of percent-done progress reports.  The routine provided in cdjpeg.c merely
-prints percentages to stderr, but you can customize it to do something
-fancier.
-
-Utah RLE file format support:
-
-We distribute the software with support for RLE image files (Utah Raster
-Toolkit format) disabled, because the RLE support won't compile without the
-Utah library.  If you have URT version 3.1 or later, you can enable RLE
-support as follows:
-	1.  #define RLE_SUPPORTED in jconfig.h.
-	2.  Add a -I option to CFLAGS in the Makefile for the directory
-	    containing the URT .h files (typically the "include"
-	    subdirectory of the URT distribution).
-	3.  Add -L... -lrle to LDLIBS in the Makefile, where ... specifies
-	    the directory containing the URT "librle.a" file (typically the
-	    "lib" subdirectory of the URT distribution).
-
-Support for 12-bit-deep pixel data:
-
-The JPEG standard allows either 8-bit or 12-bit data precision.  (For color,
-this means 8 or 12 bits per channel, of course.)  If you need to work with
-deeper than 8-bit data, you can compile the IJG code for 12-bit operation.
-To do so:
-  1. In jmorecfg.h, define BITS_IN_JSAMPLE as 12 rather than 8.
-  2. In jconfig.h, undefine BMP_SUPPORTED, RLE_SUPPORTED, and TARGA_SUPPORTED,
-     because the code for those formats doesn't handle 12-bit data and won't
-     even compile.  (The PPM code does work, as explained below.  The GIF
-     code works too; it scales 8-bit GIF data to and from 12-bit depth
-     automatically.)
-  3. Compile.  Don't expect "make test" to pass, since the supplied test
-     files are for 8-bit data.
-
-Currently, 12-bit support does not work on 16-bit-int machines.
-
-Note that a 12-bit version will not read 8-bit JPEG files, nor vice versa;
-so you'll want to keep around a regular 8-bit compilation as well.
-(Run-time selection of data depth, to allow a single copy that does both,
-is possible but would probably slow things down considerably; it's very low
-on our to-do list.)
-
-The PPM reader (rdppm.c) can read 12-bit data from either text-format or
-binary-format PPM and PGM files.  Binary-format PPM/PGM files which have a
-maxval greater than 255 are assumed to use 2 bytes per sample, LSB first
-(little-endian order).  As of early 1995, 2-byte binary format is not
-officially supported by the PBMPLUS library, but it is expected that a
-future release of PBMPLUS will support it.  Note that the PPM reader will
-read files of any maxval regardless of the BITS_IN_JSAMPLE setting; incoming
-data is automatically rescaled to either maxval=255 or maxval=4095 as
-appropriate for the cjpeg bit depth.
-
-The PPM writer (wrppm.c) will normally write 2-byte binary PPM or PGM
-format, maxval 4095, when compiled with BITS_IN_JSAMPLE=12.  Since this
-format is not yet widely supported, you can disable it by compiling wrppm.c
-with PPM_NORAWWORD defined; then the data is scaled down to 8 bits to make a
-standard 1-byte/sample PPM or PGM file.  (Yes, this means still another copy
-of djpeg to keep around.  But hopefully you won't need it for very long.
-Poskanzer's supposed to get that new PBMPLUS release out Real Soon Now.)
-
-Of course, if you are working with 12-bit data, you probably have it stored
-in some other, nonstandard format.  In that case you'll probably want to
-write your own I/O modules to read and write your format.
-
-Note that a 12-bit version of cjpeg always runs in "-optimize" mode, in
-order to generate valid Huffman tables.  This is necessary because our
-default Huffman tables only cover 8-bit data.
-
-Removing code:
-
-If you need to make a smaller version of the JPEG software, some optional
-functions can be removed at compile time.  See the xxx_SUPPORTED #defines in
-jconfig.h and jmorecfg.h.  If at all possible, we recommend that you leave in
-decoder support for all valid JPEG files, to ensure that you can read anyone's
-output.  Taking out support for image file formats that you don't use is the
-most painless way to make the programs smaller.  Another possibility is to
-remove some of the DCT methods: in particular, the "IFAST" method may not be
-enough faster than the others to be worth keeping on your machine.  (If you
-do remove ISLOW or IFAST, be sure to redefine JDCT_DEFAULT or JDCT_FASTEST
-to a supported method, by adding a #define in jconfig.h.)
-
-
-OPTIMIZATION
-============
-
-Unless you own a Cray, you'll probably be interested in making the JPEG
-software go as fast as possible.  This section covers some machine-dependent
-optimizations you may want to try.  We suggest that before trying any of
-this, you first get the basic installation to pass the self-test step.
-Repeat the self-test after any optimization to make sure that you haven't
-broken anything.
-
-The integer DCT routines perform a lot of multiplications.  These
-multiplications must yield 32-bit results, but none of their input values
-are more than 16 bits wide.  On many machines, notably the 680x0 and 80x86
-CPUs, a 16x16=>32 bit multiply instruction is faster than a full 32x32=>32
-bit multiply.  Unfortunately there is no portable way to specify such a
-multiplication in C, but some compilers can generate one when you use the
-right combination of casts.  See the MULTIPLYxxx macro definitions in
-jdct.h.  If your compiler makes "int" be 32 bits and "short" be 16 bits,
-defining SHORTxSHORT_32 is fairly likely to work.  When experimenting with
-alternate definitions, be sure to test not only whether the code still works
-(use the self-test), but also whether it is actually faster --- on some
-compilers, alternate definitions may compute the right answer, yet be slower
-than the default.  Timing cjpeg on a large PGM (grayscale) input file is the
-best way to check this, as the DCT will be the largest fraction of the runtime
-in that mode.  (Note: some of the distributed compiler-specific jconfig files
-already contain #define switches to select appropriate MULTIPLYxxx
-definitions.)
-
-If your machine has sufficiently fast floating point hardware, you may find
-that the float DCT method is faster than the integer DCT methods, even
-after tweaking the integer multiply macros.  In that case you may want to
-make the float DCT be the default method.  (The only objection to this is
-that float DCT results may vary slightly across machines.)  To do that, add
-"#define JDCT_DEFAULT JDCT_FLOAT" to jconfig.h.  Even if you don't change
-the default, you should redefine JDCT_FASTEST, which is the method selected
-by djpeg's -fast switch.  Don't forget to update the documentation files
-(usage.doc and/or cjpeg.1, djpeg.1) to agree with what you've done.
-
-If access to "short" arrays is slow on your machine, it may be a win to
-define type JCOEF as int rather than short.  This will cost a good deal of
-memory though, particularly in some multi-pass modes, so don't do it unless
-you have memory to burn and short is REALLY slow.
-
-If your compiler can compile function calls in-line, make sure the INLINE
-macro in jmorecfg.h is defined as the keyword that marks a function
-inline-able.  Some compilers have a switch that tells the compiler to inline
-any function it thinks is profitable (e.g., -finline-functions for gcc).
-Enabling such a switch is likely to make the compiled code bigger but faster.
-
-In general, it's worth trying the maximum optimization level of your compiler,
-and experimenting with any optional optimizations such as loop unrolling.
-(Unfortunately, far too many compilers have optimizer bugs ... be prepared to
-back off if the code fails self-test.)  If you do any experimentation along
-these lines, please report the optimal settings to [email protected] so
-we can mention them in future releases.  Be sure to specify your machine and
-compiler version.
-
-
-HINTS FOR SPECIFIC SYSTEMS
-==========================
-
-We welcome reports on changes needed for systems not mentioned here.  Submit
-'em to [email protected].  Also, if configure or ckconfig.c is wrong
-about how to configure the JPEG software for your system, please let us know.
-
-
-Acorn RISC OS:
-
-(Thanks to Simon Middleton for these hints on compiling with Desktop C.)
-After renaming the files according to Acorn conventions, take a copy of
-makefile.ansi, change all occurrences of 'libjpeg.a' to 'libjpeg.o' and
-change these definitions as indicated:
-
-CFLAGS= -throwback -IC: -Wn
-LDLIBS=C:o.Stubs
-SYSDEPMEM=jmemansi.o
-LN=Link
-AR=LibFile -c -o
-
-Also add a new line '.c.o:; $(cc) $< $(cflags) -c -o $@'.  Remove the
-lines '$(RM) libjpeg.o' and '$(AR2) libjpeg.o' and the 'jconfig.h'
-dependency section.
-
-Copy jconfig.doc to jconfig.h.  Edit jconfig.h to define TWO_FILE_COMMANDLINE
-and CHAR_IS_UNSIGNED.
-
-Run the makefile using !AMU not !Make.  If you want to use the 'clean' and
-'test' makefile entries then you will have to fiddle with the syntax a bit
-and rename the test files.
-
-
-Amiga:
-
-SAS C 6.50 reportedly is too buggy to compile the IJG code properly.
-A patch to update to 6.51 is available from SAS or AmiNet FTP sites.
-
-The supplied config files are set up to use jmemname.c as the memory
-manager, with temporary files being created on the device named by
-"JPEGTMP:".
-
-
-Atari ST/STE/TT:
- 
-Copy the project files makcjpeg.st, makdjpeg.st, maktjpeg.st, and makljpeg.st
-to cjpeg.prj, djpeg.prj, jpegtran.prj, and libjpeg.prj respectively.  The
-project files should work as-is with Pure C.  For Turbo C, change library
-filenames "pc..." to "tc..." in each project file.  Note that libjpeg.prj
-selects jmemansi.c as the recommended memory manager.  You'll probably want to
-adjust the DEFAULT_MAX_MEM setting --- you want it to be a couple hundred K
-less than your normal free memory.  Put "#define DEFAULT_MAX_MEM nnnn" into
-jconfig.h to do this.
-
-To use the 68881/68882 coprocessor for the floating point DCT, add the
-compiler option "-8" to the project files and replace pcfltlib.lib with
-pc881lib.lib in cjpeg.prj and djpeg.prj.  Or if you don't have a
-coprocessor, you may prefer to remove the float DCT code by undefining
-DCT_FLOAT_SUPPORTED in jmorecfg.h (since without a coprocessor, the float
-code will be too slow to be useful).  In that case, you can delete
-pcfltlib.lib from the project files.
-
-Note that you must make libjpeg.lib before making cjpeg.ttp, djpeg.ttp,
-or jpegtran.ttp.  You'll have to perform the self-test by hand.
-
-We haven't bothered to include project files for rdjpgcom and wrjpgcom.
-Those source files should just be compiled by themselves; they don't
-depend on the JPEG library.
-
-There is a bug in some older versions of the Turbo C library which causes the
-space used by temporary files created with "tmpfile()" not to be freed after
-an abnormal program exit.  If you check your disk afterwards, you will find
-cluster chains that are allocated but not used by a file.  This should not
-happen in cjpeg/djpeg/jpegtran, since we enable a signal catcher to explicitly
-close temp files before exiting.  But if you use the JPEG library with your
-own code, be sure to supply a signal catcher, or else use a different
-system-dependent memory manager.
-
-
-Cray:
-
-Should you be so fortunate as to be running JPEG on a Cray YMP, there is a
-compiler bug in old versions of Cray's Standard C (prior to 3.1).  If you
-still have an old compiler, you'll need to insert a line reading
-"#pragma novector" just before the loop	
-    for (i = 1; i <= (int) htbl->bits[l]; i++)
-      huffsize[p++] = (char) l;
-in fix_huff_tbl (in V5beta1, line 204 of jchuff.c and line 176 of jdhuff.c).
-[This bug may or may not still occur with the current IJG code, but it's
-probably a dead issue anyway...]
-
-
-HP-UX:
-
-If you have HP-UX 7.05 or later with the "software development" C compiler,
-you should run the compiler in ANSI mode.  If using the configure script,
-say
-	./configure CC='cc -Aa'
-(or -Ae if you prefer).  If configuring by hand, use makefile.ansi and add
-"-Aa" to the CFLAGS line in the makefile.
-
-If you have a pre-7.05 system, or if you are using the non-ANSI C compiler
-delivered with a minimum HP-UX system, then you must use makefile.unix
-(and do NOT add -Aa); or just run configure without the CC option.
-
-On HP 9000 series 800 machines, the HP C compiler is buggy in revisions prior
-to A.08.07.  If you get complaints about "not a typedef name", you'll have to
-use makefile.unix, or run configure without the CC option.
-
-
-Macintosh, generic comments:
-
-The supplied user-interface files (cjpeg.c, djpeg.c, etc) are set up to
-provide a Unix-style command line interface.  You can use this interface on
-the Mac by means of the ccommand() library routine provided by Metrowerks
-CodeWarrior or Think C.  This is only appropriate for testing the library,
-however; to make a user-friendly equivalent of cjpeg/djpeg you'd really want
-to develop a Mac-style user interface.  There isn't a complete example
-available at the moment, but there are some helpful starting points:
-1. Sam Bushell's free "To JPEG" applet provides drag-and-drop conversion to
-JPEG under System 7 and later.  This only illustrates how to use the
-compression half of the library, but it does a very nice job of that part.
-The CodeWarrior source code is available from http://www.pobox.com/~jsam.
-2. Jim Brunner prepared a Mac-style user interface for both compression and
-decompression.  Unfortunately, it hasn't been updated since IJG v4, and
-the library's API has changed considerably since then.  Still it may be of
-some help, particularly as a guide to compiling the IJG code under Think C.
-Jim's code is available from the Info-Mac archives, at sumex-aim.stanford.edu
-or mirrors thereof; see file /info-mac/dev/src/jpeg-convert-c.hqx.
-
-jmemmac.c is the recommended memory manager back end for Macintosh.  It uses
-NewPtr/DisposePtr instead of malloc/free, and has a Mac-specific
-implementation of jpeg_mem_available().  It also creates temporary files that
-follow Mac conventions.  (That part of the code relies on System-7-or-later OS
-functions.  See the comments in jmemmac.c if you need to run it on System 6.)
-NOTE that USE_MAC_MEMMGR must be defined in jconfig.h to use jmemmac.c.
-
-You can also use jmemnobs.c, if you don't care about handling images larger
-than available memory.  If you use any memory manager back end other than
-jmemmac.c, we recommend replacing "malloc" and "free" by "NewPtr" and
-"DisposePtr", because Mac C libraries often have peculiar implementations of
-malloc/free.  (For instance, free() may not return the freed space to the
-Mac Memory Manager.  This is undesirable for the IJG code because jmemmgr.c
-already clumps space requests.)
-
-
-Macintosh, Metrowerks CodeWarrior:
-
-The Unix-command-line-style interface can be used by defining USE_CCOMMAND.
-You'll also need to define TWO_FILE_COMMANDLINE to avoid stdin/stdout.
-This means that when using the cjpeg/djpeg programs, you'll have to type the
-input and output file names in the "Arguments" text-edit box, rather than
-using the file radio buttons.  (Perhaps USE_FDOPEN or USE_SETMODE would
-eliminate the problem, but I haven't heard from anyone who's tried it.)
-
-On 680x0 Macs, Metrowerks defines type "double" as a 10-byte IEEE extended
-float.  jmemmgr.c won't like this: it wants sizeof(ALIGN_TYPE) to be a power
-of 2.  Add "#define ALIGN_TYPE long" to jconfig.h to eliminate the complaint.
-
-The supplied configuration file jconfig.mac can be used for your jconfig.h;
-it includes all the recommended symbol definitions.  If you have AppleScript
-installed, you can run the supplied script makeproj.mac to create CodeWarrior
-project files for the library and the testbed applications, then build the
-library and applications.  (Thanks to Dan Sears and Don Agro for this nifty
-hack, which saves us from trying to maintain CodeWarrior project files as part
-of the IJG distribution...)
-
-
-Macintosh, Think C:
-
-The documentation in Jim Brunner's "JPEG Convert" source code (see above)
-includes detailed build instructions for Think C; it's probably somewhat
-out of date for the current release, but may be helpful.
-
-If you want to build the minimal command line version, proceed as follows.
-You'll have to prepare project files for the programs; we don't include any
-in the distribution since they are not text files.  Use the file lists in
-any of the supplied makefiles as a guide.  Also add the ANSI and Unix C
-libraries in a separate segment.  You may need to divide the JPEG files into
-more than one segment; we recommend dividing compression and decompression
-modules.  Define USE_CCOMMAND in jconfig.h so that the ccommand() routine is
-called.  You must also define TWO_FILE_COMMANDLINE because stdin/stdout
-don't handle binary data correctly.
-
-On 680x0 Macs, Think C defines type "double" as a 12-byte IEEE extended float.
-jmemmgr.c won't like this: it wants sizeof(ALIGN_TYPE) to be a power of 2.
-Add "#define ALIGN_TYPE long" to jconfig.h to eliminate the complaint.
-
-jconfig.mac should work as a jconfig.h configuration file for Think C,
-but the makeproj.mac AppleScript script is specific to CodeWarrior.  Sorry.
-
-
-MIPS R3000:
-
-MIPS's cc version 1.31 has a rather nasty optimization bug.  Don't use -O
-if you have that compiler version.  (Use "cc -V" to check the version.)
-Note that the R3000 chip is found in workstations from DEC and others.
-
-
-MS-DOS, generic comments for 16-bit compilers:
-
-The IJG code is designed to work well in 80x86 "small" or "medium" memory
-models (i.e., data pointers are 16 bits unless explicitly declared "far";
-code pointers can be either size).  You may be able to use small model to
-compile cjpeg or djpeg by itself, but you will probably have to use medium
-model for any larger application.  This won't make much difference in
-performance.  You *will* take a noticeable performance hit if you use a
-large-data memory model, and you should avoid "huge" model if at all
-possible.  Be sure that NEED_FAR_POINTERS is defined in jconfig.h if you use
-a small-data memory model; be sure it is NOT defined if you use a large-data
-model.  (The supplied makefiles and jconfig files for Borland and Microsoft C
-compile in medium model and define NEED_FAR_POINTERS.)
-
-The DOS-specific memory manager, jmemdos.c, should be used if possible.
-It needs some assembly-code routines which are in jmemdosa.asm; make sure
-your makefile assembles that file and includes it in the library.  If you
-don't have a suitable assembler, you can get pre-assembled object files for
-jmemdosa by FTP from ftp.uu.net:/graphics/jpeg/jdosaobj.zip.  (DOS-oriented
-distributions of the IJG source code often include these object files.)
-
-When using jmemdos.c, jconfig.h must define USE_MSDOS_MEMMGR and must set
-MAX_ALLOC_CHUNK to less than 64K (65520L is a typical value).  If your
-C library's far-heap malloc() can't allocate blocks that large, reduce
-MAX_ALLOC_CHUNK to whatever it can handle.
-
-If you can't use jmemdos.c for some reason --- for example, because you
-don't have an assembler to assemble jmemdosa.asm --- you'll have to fall
-back to jmemansi.c or jmemname.c.  You'll probably still need to set
-MAX_ALLOC_CHUNK in jconfig.h, because most DOS C libraries won't malloc()
-more than 64K at a time.  IMPORTANT: if you use jmemansi.c or jmemname.c,
-you will have to compile in a large-data memory model in order to get the
-right stdio library.  Too bad.
-
-wrjpgcom needs to be compiled in large model, because it malloc()s a 64KB
-work area to hold the comment text.  If your C library's malloc can't
-handle that, reduce MAX_COM_LENGTH as necessary in wrjpgcom.c.
-
-Most MS-DOS compilers treat stdin/stdout as text files, so you must use
-two-file command line style.  But if your compiler has either fdopen() or
-setmode(), you can use one-file style if you like.  To do this, define
-USE_SETMODE or USE_FDOPEN so that stdin/stdout will be set to binary mode.
-(USE_SETMODE seems to work with more DOS compilers than USE_FDOPEN.)  You
-should test that I/O through stdin/stdout produces the same results as I/O
-to explicitly named files... the "make test" procedures in the supplied
-makefiles do NOT use stdin/stdout.
-
-
-MS-DOS, generic comments for 32-bit compilers:
-
-None of the above comments about memory models apply if you are using a
-32-bit flat-memory-space environment, such as DJGPP or Watcom C.  (And you
-should use one if you have it, as performance will be much better than
-8086-compatible code!)  For flat-memory-space compilers, do NOT define
-NEED_FAR_POINTERS, and do NOT use jmemdos.c.  Use jmemnobs.c if the
-environment supplies adequate virtual memory, otherwise use jmemansi.c or
-jmemname.c.
-
-You'll still need to be careful about binary I/O through stdin/stdout.
-See the last paragraph of the previous section.
-
-
-MS-DOS, Borland C:
-
-Be sure to convert all the source files to DOS text format (CR/LF newlines).
-Although Borland C will often work OK with unmodified Unix (LF newlines)
-source files, sometimes it will give bogus compile errors.
-"Illegal character '#'" is the most common such error.  (This is true with
-Borland C 3.1, but perhaps is fixed in newer releases.)
-
-If you want one-file command line style, just undefine TWO_FILE_COMMANDLINE.
-jconfig.bcc already includes #define USE_SETMODE to make this work.
-(fdopen does not work correctly.)
-
-
-MS-DOS, Microsoft C:
-
-makefile.mc6 works with Microsoft C, DOS Visual C++, etc.  It should only
-be used if you want to build a 16-bit (small or medium memory model) program.
-
-If you want one-file command line style, just undefine TWO_FILE_COMMANDLINE.
-jconfig.mc6 already includes #define USE_SETMODE to make this work.
-(fdopen does not work correctly.)
-
-Note that this makefile assumes that the working copy of itself is called
-"makefile".  If you want to call it something else, say "makefile.mak",
-be sure to adjust the dependency line that reads "$(RFILE) : makefile".
-Otherwise the make will fail because it doesn't know how to create "makefile".
-Worse, some releases of Microsoft's make utilities give an incorrect error
-message in this situation.
-
-Old versions of MS C fail with an "out of macro expansion space" error
-because they can't cope with the macro TRACEMS8 (defined in jerror.h).
-If this happens to you, the easiest solution is to change TRACEMS8 to
-expand to nothing.  You'll lose the ability to dump out JPEG coefficient
-tables with djpeg -debug -debug, but at least you can compile.
-
-Original MS C 6.0 is very buggy; it compiles incorrect code unless you turn
-off optimization entirely (remove -O from CFLAGS).  6.00A is better, but it
-still generates bad code if you enable loop optimizations (-Ol or -Ox).
-
-MS C 8.0 crashes when compiling jquant1.c with optimization switch /Oo ...
-which is on by default.  To work around this bug, compile that one file
-with /Oo-.
-
-
-Microsoft Windows (all versions), generic comments:
-
-Some Windows system include files define typedef boolean as "unsigned char".
-The IJG code also defines typedef boolean, but we make it "int" by default.
-This doesn't affect the IJG programs because we don't import those Windows
-include files.  But if you use the JPEG library in your own program, and some
-of your program's files import one definition of boolean while some import the
-other, you can get all sorts of mysterious problems.  A good preventive step
-is to make the IJG library use "unsigned char" for boolean.  To do that,
-add something like this to your jconfig.h file:
-	/* Define "boolean" as unsigned char, not int, per Windows custom */
-	#ifndef __RPCNDR_H__	/* don't conflict if rpcndr.h already read */
-	typedef unsigned char boolean;
-	#endif
-	#define HAVE_BOOLEAN	/* prevent jmorecfg.h from redefining it */
-(This is already in jconfig.vc, by the way.)
-
-windef.h contains the declarations
-	#define far
-	#define FAR far
-Since jmorecfg.h tries to define FAR as empty, you may get a compiler
-warning if you include both jpeglib.h and windef.h (which windows.h
-includes).  To suppress the warning, you can put "#ifndef FAR"/"#endif"
-around the line "#define FAR" in jmorecfg.h.
-
-When using the library in a Windows application, you will almost certainly
-want to modify or replace the error handler module jerror.c, since our
-default error handler does a couple of inappropriate things:
-  1. it tries to write error and warning messages on stderr;
-  2. in event of a fatal error, it exits by calling exit().
-
-A simple stopgap solution for problem 1 is to replace the line
-	fprintf(stderr, "%s\n", buffer);
-(in output_message in jerror.c) with
-	MessageBox(GetActiveWindow(),buffer,"JPEG Error",MB_OK|MB_ICONERROR);
-It's highly recommended that you at least do that much, since otherwise
-error messages will disappear into nowhere.  (Beginning with IJG v6b, this
-code is already present in jerror.c; just define USE_WINDOWS_MESSAGEBOX in
-jconfig.h to enable it.)
-
-The proper solution for problem 2 is to return control to your calling
-application after a library error.  This can be done with the setjmp/longjmp
-technique discussed in libjpeg.doc and illustrated in example.c.  (NOTE:
-some older Windows C compilers provide versions of setjmp/longjmp that
-don't actually work under Windows.  You may need to use the Windows system
-functions Catch and Throw instead.)
-
-The recommended memory manager under Windows is jmemnobs.c; in other words,
-let Windows do any virtual memory management needed.  You should NOT use
-jmemdos.c nor jmemdosa.asm under Windows.
-
-For Windows 3.1, we recommend compiling in medium or large memory model;
-for newer Windows versions, use a 32-bit flat memory model.  (See the MS-DOS
-sections above for more info about memory models.)  In the 16-bit memory
-models only, you'll need to put
-	#define MAX_ALLOC_CHUNK 65520L	/* Maximum request to malloc() */
-into jconfig.h to limit allocation chunks to 64Kb.  (Without that, you'd
-have to use huge memory model, which slows things down unnecessarily.)
-jmemnobs.c works without modification in large or flat memory models, but to
-use medium model, you need to modify its jpeg_get_large and jpeg_free_large
-routines to allocate far memory.  In any case, you might like to replace
-its calls to malloc and free with direct calls on Windows memory allocation
-functions.
-
-You may also want to modify jdatasrc.c and jdatadst.c to use Windows file
-operations rather than fread/fwrite.  This is only necessary if your C
-compiler doesn't provide a competent implementation of C stdio functions.
-
-You might want to tweak the RGB_xxx macros in jmorecfg.h so that the library
-will accept or deliver color pixels in BGR sample order, not RGB; BGR order
-is usually more convenient under Windows.  Note that this change will break
-the sample applications cjpeg/djpeg, but the library itself works fine.
-
-
-Many people want to convert the IJG library into a DLL.  This is reasonably
-straightforward, but watch out for the following:
-
-  1. Don't try to compile as a DLL in small or medium memory model; use
-large model, or even better, 32-bit flat model.  Many places in the IJG code
-assume the address of a local variable is an ordinary (not FAR) pointer;
-that isn't true in a medium-model DLL.
-
-  2. Microsoft C cannot pass file pointers between applications and DLLs.
-(See Microsoft Knowledge Base, PSS ID Number Q50336.)  So jdatasrc.c and
-jdatadst.c don't work if you open a file in your application and then pass
-the pointer to the DLL.  One workaround is to make jdatasrc.c/jdatadst.c
-part of your main application rather than part of the DLL.
-
-  3. You'll probably need to modify the macros GLOBAL() and EXTERN() to
-attach suitable linkage keywords to the exported routine names.  Similarly,
-you'll want to modify METHODDEF() and JMETHOD() to ensure function pointers
-are declared in a way that lets application routines be called back through
-the function pointers.  These macros are in jmorecfg.h.  Typical definitions
-for a 16-bit DLL are:
-	#define GLOBAL(type)		type _far _pascal _loadds _export
-	#define EXTERN(type)		extern type _far _pascal _loadds
-	#define METHODDEF(type)		static type _far _pascal
-	#define JMETHOD(type,methodname,arglist)  \
-		type (_far _pascal *methodname) arglist
-For a 32-bit DLL you may want something like
-	#define GLOBAL(type)		__declspec(dllexport) type
-	#define EXTERN(type)		extern __declspec(dllexport) type
-Although not all the GLOBAL routines are actually intended to be called by
-the application, the performance cost of making them all DLL entry points is
-negligible.
-
-The unmodified IJG library presents a very C-specific application interface,
-so the resulting DLL is only usable from C or C++ applications.  There has
-been some talk of writing wrapper code that would present a simpler interface
-usable from other languages, such as Visual Basic.  This is on our to-do list
-but hasn't been very high priority --- any volunteers out there?
-
-
-Microsoft Windows, Borland C:
-
-The provided jconfig.bcc should work OK in a 32-bit Windows environment,
-but you'll need to tweak it in a 16-bit environment (you'd need to define
-NEED_FAR_POINTERS and MAX_ALLOC_CHUNK).  Beware that makefile.bcc will need
-alteration if you want to use it for Windows --- in particular, you should
-use jmemnobs.c not jmemdos.c under Windows.
-
-Borland C++ 4.5 fails with an internal compiler error when trying to compile
-jdmerge.c in 32-bit mode.  If enough people complain, perhaps Borland will fix
-it.  In the meantime, the simplest known workaround is to add a redundant
-definition of the variable range_limit in h2v1_merged_upsample(), at the head
-of the block that handles odd image width (about line 268 in v6 jdmerge.c):
-  /* If image width is odd, do the last output column separately */
-  if (cinfo->output_width & 1) {
-    register JSAMPLE * range_limit = cinfo->sample_range_limit; /* ADD THIS */
-    cb = GETJSAMPLE(*inptr1);
-Pretty bizarre, especially since the very similar routine h2v2_merged_upsample
-doesn't trigger the bug.
-Recent reports suggest that this bug does not occur with "bcc32a" (the
-Pentium-optimized version of the compiler).
-
-Another report from a user of Borland C 4.5 was that incorrect code (leading
-to a color shift in processed images) was produced if any of the following
-optimization switch combinations were used: 
-	-Ot -Og
-	-Ot -Op
-	-Ot -Om
-So try backing off on optimization if you see such a problem.  (Are there
-several different releases all numbered "4.5"??)
-
-
-Microsoft Windows, Microsoft Visual C++:
-
-jconfig.vc should work OK with any Microsoft compiler for a 32-bit memory
-model.  makefile.vc is intended for command-line use.  (If you are using
-the Developer Studio environment, you may prefer the DevStudio project
-files; see below.)
-
-Some users feel that it's easier to call the library from C++ code if you
-force VC++ to treat the library as C++ code, which you can do by renaming
-all the *.c files to *.cpp (and adjusting the makefile to match).  This
-avoids the need to put extern "C" { ... } around #include "jpeglib.h" in
-your C++ application.
-
-
-Microsoft Windows, Microsoft Developer Studio:
-
-We include makefiles that should work as project files in DevStudio 4.2 or
-later.  There is a library makefile that builds the IJG library as a static
-Win32 library, and an application makefile that builds the sample applications
-as Win32 console applications.  (Even if you only want the library, we
-recommend building the applications so that you can run the self-test.)
-
-To use:
-1. Copy jconfig.vc to jconfig.h, makelib.ds to jpeg.mak, and
-   makeapps.ds to apps.mak.  (Note that the renaming is critical!)
-2. Click on the .mak files to construct project workspaces.
-   (If you are using DevStudio more recent than 4.2, you'll probably
-   get a message saying that the makefiles are being updated.)
-3. Build the library project, then the applications project.
-4. Move the application .exe files from `app`\Release to an
-   appropriate location on your path.
-5. To perform the self-test, execute the command line
-	NMAKE /f makefile.vc  test
-
-
-OS/2, Borland C++:
-
-Watch out for optimization bugs in older Borland compilers; you may need
-to back off the optimization switch settings.  See the comments in
-makefile.bcc.
-
-
-SGI:
-
-On some SGI systems, you may need to set "AR2= ar -ts" in the Makefile.
-If you are using configure, you can do this by saying
-	./configure RANLIB='ar -ts'
-This change is not needed on all SGIs.  Use it only if the make fails at the
-stage of linking the completed programs.
-
-On the MIPS R4000 architecture (Indy, etc.), the compiler option "-mips2"
-reportedly speeds up the float DCT method substantially, enough to make it
-faster than the default int method (but still slower than the fast int
-method).  If you use -mips2, you may want to alter the default DCT method to
-be float.  To do this, put "#define JDCT_DEFAULT JDCT_FLOAT" in jconfig.h.
-
-
-VMS:
-
-On an Alpha/VMS system with MMS, be sure to use the "/Marco=Alpha=1"
-qualifier with MMS when building the JPEG package.
-
-VAX/VMS v5.5-1 may have problems with the test step of the build procedure
-reporting differences when it compares the original and test images.  If the
-error points to the last block of the files, it is most likely bogus and may
-be safely ignored.  It seems to be because the files are Stream_LF and
-Backup/Compare has difficulty with the (presumably) null padded files.
-This problem was not observed on VAX/VMS v6.1 or AXP/VMS v6.1.

Engine/lib/ljpeg/extras/jconfig.bcc

@@ -1,48 +0,0 @@
-/* jconfig.bcc --- jconfig.h for Borland C (Turbo C) on MS-DOS or OS/2. */
-/* see jconfig.doc for explanations */
-
-#define HAVE_PROTOTYPES
-#define HAVE_UNSIGNED_CHAR
-#define HAVE_UNSIGNED_SHORT
-/* #define void char */
-/* #define const */
-#undef CHAR_IS_UNSIGNED
-#define HAVE_STDDEF_H
-#define HAVE_STDLIB_H
-#undef NEED_BSD_STRINGS
-#undef NEED_SYS_TYPES_H
-#ifdef __MSDOS__
-#define NEED_FAR_POINTERS	/* for small or medium memory model */
-#endif
-#undef NEED_SHORT_EXTERNAL_NAMES
-#undef INCOMPLETE_TYPES_BROKEN	/* this assumes you have -w-stu in CFLAGS */
-
-#ifdef JPEG_INTERNALS
-
-#undef RIGHT_SHIFT_IS_UNSIGNED
-
-#ifdef __MSDOS__
-#define USE_MSDOS_MEMMGR	/* Define this if you use jmemdos.c */
-#define MAX_ALLOC_CHUNK 65520L	/* Maximum request to malloc() */
-#define USE_FMEM		/* Borland has _fmemcpy() and _fmemset() */
-#endif
-
-#endif /* JPEG_INTERNALS */
-
-#ifdef JPEG_CJPEG_DJPEG
-
-#define BMP_SUPPORTED		/* BMP image file format */
-#define GIF_SUPPORTED		/* GIF image file format */
-#define PPM_SUPPORTED		/* PBMPLUS PPM/PGM image file format */
-#undef RLE_SUPPORTED		/* Utah RLE image file format */
-#define TARGA_SUPPORTED		/* Targa image file format */
-
-#define TWO_FILE_COMMANDLINE
-#define USE_SETMODE		/* Borland has setmode() */
-#ifdef __MSDOS__
-#define NEED_SIGNAL_CATCHER	/* Define this if you use jmemdos.c */
-#endif
-#undef DONT_USE_B_MODE
-#undef PROGRESS_REPORT		/* optional */
-
-#endif /* JPEG_CJPEG_DJPEG */

Engine/lib/ljpeg/extras/jconfig.cfg

@@ -1,44 +0,0 @@
-/* jconfig.cfg --- source file edited by configure script */
-/* see jconfig.doc for explanations */
-
-#undef HAVE_PROTOTYPES
-#undef HAVE_UNSIGNED_CHAR
-#undef HAVE_UNSIGNED_SHORT
-#undef void
-#undef const
-#undef CHAR_IS_UNSIGNED
-#undef HAVE_STDDEF_H
-#undef HAVE_STDLIB_H
-#undef NEED_BSD_STRINGS
-#undef NEED_SYS_TYPES_H
-#undef NEED_FAR_POINTERS
-#undef NEED_SHORT_EXTERNAL_NAMES
-/* Define this if you get warnings about undefined structures. */
-#undef INCOMPLETE_TYPES_BROKEN
-
-#ifdef JPEG_INTERNALS
-
-#undef RIGHT_SHIFT_IS_UNSIGNED
-#undef INLINE
-/* These are for configuring the JPEG memory manager. */
-#undef DEFAULT_MAX_MEM
-#undef NO_MKTEMP
-
-#endif /* JPEG_INTERNALS */
-
-#ifdef JPEG_CJPEG_DJPEG
-
-#define BMP_SUPPORTED		/* BMP image file format */
-#define GIF_SUPPORTED		/* GIF image file format */
-#define PPM_SUPPORTED		/* PBMPLUS PPM/PGM image file format */
-#undef RLE_SUPPORTED		/* Utah RLE image file format */
-#define TARGA_SUPPORTED		/* Targa image file format */
-
-#undef TWO_FILE_COMMANDLINE
-#undef NEED_SIGNAL_CATCHER
-#undef DONT_USE_B_MODE
-
-/* Define this if you want percent-done progress reports from cjpeg/djpeg. */
-#undef PROGRESS_REPORT
-
-#endif /* JPEG_CJPEG_DJPEG */

Engine/lib/ljpeg/extras/jconfig.dj

@@ -1,38 +0,0 @@
-/* jconfig.dj --- jconfig.h for DJGPP (Delorie's GNU C port) on MS-DOS. */
-/* see jconfig.doc for explanations */
-
-#define HAVE_PROTOTYPES
-#define HAVE_UNSIGNED_CHAR
-#define HAVE_UNSIGNED_SHORT
-/* #define void char */
-/* #define const */
-#undef CHAR_IS_UNSIGNED
-#define HAVE_STDDEF_H
-#define HAVE_STDLIB_H
-#undef NEED_BSD_STRINGS
-#undef NEED_SYS_TYPES_H
-#undef NEED_FAR_POINTERS	/* DJGPP uses flat 32-bit addressing */
-#undef NEED_SHORT_EXTERNAL_NAMES
-#undef INCOMPLETE_TYPES_BROKEN
-
-#ifdef JPEG_INTERNALS
-
-#undef RIGHT_SHIFT_IS_UNSIGNED
-
-#endif /* JPEG_INTERNALS */
-
-#ifdef JPEG_CJPEG_DJPEG
-
-#define BMP_SUPPORTED		/* BMP image file format */
-#define GIF_SUPPORTED		/* GIF image file format */
-#define PPM_SUPPORTED		/* PBMPLUS PPM/PGM image file format */
-#undef RLE_SUPPORTED		/* Utah RLE image file format */
-#define TARGA_SUPPORTED		/* Targa image file format */
-
-#undef TWO_FILE_COMMANDLINE	/* optional */
-#define USE_SETMODE		/* Needed to make one-file style work in DJGPP */
-#undef NEED_SIGNAL_CATCHER	/* Define this if you use jmemname.c */
-#undef DONT_USE_B_MODE
-#undef PROGRESS_REPORT		/* optional */
-
-#endif /* JPEG_CJPEG_DJPEG */

Engine/lib/ljpeg/extras/jconfig.doc

@@ -1,155 +0,0 @@
-/*
- * jconfig.doc
- *
- * Copyright (C) 1991-1994, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file documents the configuration options that are required to
- * customize the JPEG software for a particular system.
- *
- * The actual configuration options for a particular installation are stored
- * in jconfig.h.  On many machines, jconfig.h can be generated automatically
- * or copied from one of the "canned" jconfig files that we supply.  But if
- * you need to generate a jconfig.h file by hand, this file tells you how.
- *
- * DO NOT EDIT THIS FILE --- IT WON'T ACCOMPLISH ANYTHING.
- * EDIT A COPY NAMED JCONFIG.H.
- */
-
-
-/*
- * These symbols indicate the properties of your machine or compiler.
- * #define the symbol if yes, #undef it if no.
- */
-
-/* Does your compiler support function prototypes?
- * (If not, you also need to use ansi2knr, see install.doc)
- */
-#define HAVE_PROTOTYPES
-
-/* Does your compiler support the declaration "unsigned char" ?
- * How about "unsigned short" ?
- */
-#define HAVE_UNSIGNED_CHAR
-#define HAVE_UNSIGNED_SHORT
-
-/* Define "void" as "char" if your compiler doesn't know about type void.
- * NOTE: be sure to define void such that "void *" represents the most general
- * pointer type, e.g., that returned by malloc().
- */
-/* #define void char */
-
-/* Define "const" as empty if your compiler doesn't know the "const" keyword.
- */
-/* #define const */
-
-/* Define this if an ordinary "char" type is unsigned.
- * If you're not sure, leaving it undefined will work at some cost in speed.
- * If you defined HAVE_UNSIGNED_CHAR then the speed difference is minimal.
- */
-#undef CHAR_IS_UNSIGNED
-
-/* Define this if your system has an ANSI-conforming <stddef.h> file.
- */
-#define HAVE_STDDEF_H
-
-/* Define this if your system has an ANSI-conforming <stdlib.h> file.
- */
-#define HAVE_STDLIB_H
-
-/* Define this if your system does not have an ANSI/SysV <string.h>,
- * but does have a BSD-style <strings.h>.
- */
-#undef NEED_BSD_STRINGS
-
-/* Define this if your system does not provide typedef size_t in any of the
- * ANSI-standard places (stddef.h, stdlib.h, or stdio.h), but places it in
- * <sys/types.h> instead.
- */
-#undef NEED_SYS_TYPES_H
-
-/* For 80x86 machines, you need to define NEED_FAR_POINTERS,
- * unless you are using a large-data memory model or 80386 flat-memory mode.
- * On less brain-damaged CPUs this symbol must not be defined.
- * (Defining this symbol causes large data structures to be referenced through
- * "far" pointers and to be allocated with a special version of malloc.)
- */
-#undef NEED_FAR_POINTERS
-
-/* Define this if your linker needs global names to be unique in less
- * than the first 15 characters.
- */
-#undef NEED_SHORT_EXTERNAL_NAMES
-
-/* Although a real ANSI C compiler can deal perfectly well with pointers to
- * unspecified structures (see "incomplete types" in the spec), a few pre-ANSI
- * and pseudo-ANSI compilers get confused.  To keep one of these bozos happy,
- * define INCOMPLETE_TYPES_BROKEN.  This is not recommended unless you
- * actually get "missing structure definition" warnings or errors while
- * compiling the JPEG code.
- */
-#undef INCOMPLETE_TYPES_BROKEN
-
-
-/*
- * The following options affect code selection within the JPEG library,
- * but they don't need to be visible to applications using the library.
- * To minimize application namespace pollution, the symbols won't be
- * defined unless JPEG_INTERNALS has been defined.
- */
-
-#ifdef JPEG_INTERNALS
-
-/* Define this if your compiler implements ">>" on signed values as a logical
- * (unsigned) shift; leave it undefined if ">>" is a signed (arithmetic) shift,
- * which is the normal and rational definition.
- */
-#undef RIGHT_SHIFT_IS_UNSIGNED
-
-
-#endif /* JPEG_INTERNALS */
-
-
-/*
- * The remaining options do not affect the JPEG library proper,
- * but only the sample applications cjpeg/djpeg (see cjpeg.c, djpeg.c).
- * Other applications can ignore these.
- */
-
-#ifdef JPEG_CJPEG_DJPEG
-
-/* These defines indicate which image (non-JPEG) file formats are allowed. */
-
-#define BMP_SUPPORTED		/* BMP image file format */
-#define GIF_SUPPORTED		/* GIF image file format */
-#define PPM_SUPPORTED		/* PBMPLUS PPM/PGM image file format */
-#undef RLE_SUPPORTED		/* Utah RLE image file format */
-#define TARGA_SUPPORTED		/* Targa image file format */
-
-/* Define this if you want to name both input and output files on the command
- * line, rather than using stdout and optionally stdin.  You MUST do this if
- * your system can't cope with binary I/O to stdin/stdout.  See comments at
- * head of cjpeg.c or djpeg.c.
- */
-#undef TWO_FILE_COMMANDLINE
-
-/* Define this if your system needs explicit cleanup of temporary files.
- * This is crucial under MS-DOS, where the temporary "files" may be areas
- * of extended memory; on most other systems it's not as important.
- */
-#undef NEED_SIGNAL_CATCHER
-
-/* By default, we open image files with fopen(...,"rb") or fopen(...,"wb").
- * This is necessary on systems that distinguish text files from binary files,
- * and is harmless on most systems that don't.  If you have one of the rare
- * systems that complains about the "b" spec, define this symbol.
- */
-#undef DONT_USE_B_MODE
-
-/* Define this if you want percent-done progress reports from cjpeg/djpeg.
- */
-#undef PROGRESS_REPORT
-
-
-#endif /* JPEG_CJPEG_DJPEG */

Engine/lib/ljpeg/extras/jconfig.mac

@@ -1,43 +0,0 @@
-/* jconfig.mac --- jconfig.h for CodeWarrior on Apple Macintosh */
-/* see jconfig.doc for explanations */
-
-#define HAVE_PROTOTYPES
-#define HAVE_UNSIGNED_CHAR
-#define HAVE_UNSIGNED_SHORT
-/* #define void char */
-/* #define const */
-#undef CHAR_IS_UNSIGNED
-#define HAVE_STDDEF_H
-#define HAVE_STDLIB_H
-#undef NEED_BSD_STRINGS
-#undef NEED_SYS_TYPES_H
-#undef NEED_FAR_POINTERS
-#undef NEED_SHORT_EXTERNAL_NAMES
-#undef INCOMPLETE_TYPES_BROKEN
-
-#ifdef JPEG_INTERNALS
-
-#undef RIGHT_SHIFT_IS_UNSIGNED
-
-#define USE_MAC_MEMMGR		/* Define this if you use jmemmac.c */
-
-#define ALIGN_TYPE long		/* Needed for 680x0 Macs */
-
-#endif /* JPEG_INTERNALS */
-
-#ifdef JPEG_CJPEG_DJPEG
-
-#define BMP_SUPPORTED		/* BMP image file format */
-#define GIF_SUPPORTED		/* GIF image file format */
-#define PPM_SUPPORTED		/* PBMPLUS PPM/PGM image file format */
-#undef RLE_SUPPORTED		/* Utah RLE image file format */
-#define TARGA_SUPPORTED		/* Targa image file format */
-
-#define USE_CCOMMAND		/* Command line reader for Macintosh */
-#define TWO_FILE_COMMANDLINE	/* Binary I/O thru stdin/stdout doesn't work */
-
-#undef NEED_SIGNAL_CATCHER
-#undef DONT_USE_B_MODE
-#undef PROGRESS_REPORT		/* optional */
-
-#endif /* JPEG_CJPEG_DJPEG */

Engine/lib/ljpeg/extras/jconfig.manx

@@ -1,43 +0,0 @@
-/* jconfig.manx --- jconfig.h for Amiga systems using Manx Aztec C ver 5.x. */
-/* see jconfig.doc for explanations */
-
-#define HAVE_PROTOTYPES
-#define HAVE_UNSIGNED_CHAR
-#define HAVE_UNSIGNED_SHORT
-/* #define void char */
-/* #define const */
-#undef CHAR_IS_UNSIGNED
-#define HAVE_STDDEF_H
-#define HAVE_STDLIB_H
-#undef NEED_BSD_STRINGS
-#undef NEED_SYS_TYPES_H
-#undef NEED_FAR_POINTERS
-#undef NEED_SHORT_EXTERNAL_NAMES
-#undef INCOMPLETE_TYPES_BROKEN
-
-#ifdef JPEG_INTERNALS
-
-#undef RIGHT_SHIFT_IS_UNSIGNED
-
-#define TEMP_DIRECTORY "JPEGTMP:"	/* recommended setting for Amiga */
-
-#define SHORTxSHORT_32		/* produces better DCT code with Aztec C */
-
-#endif /* JPEG_INTERNALS */
-
-#ifdef JPEG_CJPEG_DJPEG
-
-#define BMP_SUPPORTED		/* BMP image file format */
-#define GIF_SUPPORTED		/* GIF image file format */
-#define PPM_SUPPORTED		/* PBMPLUS PPM/PGM image file format */
-#undef RLE_SUPPORTED		/* Utah RLE image file format */
-#define TARGA_SUPPORTED		/* Targa image file format */
-
-#define TWO_FILE_COMMANDLINE
-#define NEED_SIGNAL_CATCHER
-#undef DONT_USE_B_MODE
-#undef PROGRESS_REPORT		/* optional */
-
-#define signal_catcher _abort	/* hack for Aztec C naming requirements */
-
-#endif /* JPEG_CJPEG_DJPEG */

Engine/lib/ljpeg/extras/jconfig.mc6

@@ -1,52 +0,0 @@
-/* jconfig.mc6 --- jconfig.h for Microsoft C on MS-DOS, version 6.00A & up. */
-/* see jconfig.doc for explanations */
-
-#define HAVE_PROTOTYPES
-#define HAVE_UNSIGNED_CHAR
-#define HAVE_UNSIGNED_SHORT
-/* #define void char */
-/* #define const */
-#undef CHAR_IS_UNSIGNED
-#define HAVE_STDDEF_H
-#define HAVE_STDLIB_H
-#undef NEED_BSD_STRINGS
-#undef NEED_SYS_TYPES_H
-#define NEED_FAR_POINTERS	/* for small or medium memory model */
-#undef NEED_SHORT_EXTERNAL_NAMES
-#undef INCOMPLETE_TYPES_BROKEN
-
-#ifdef JPEG_INTERNALS
-
-#undef RIGHT_SHIFT_IS_UNSIGNED
-
-#define USE_MSDOS_MEMMGR	/* Define this if you use jmemdos.c */
-
-#define MAX_ALLOC_CHUNK 65520L	/* Maximum request to malloc() */
-
-#define USE_FMEM		/* Microsoft has _fmemcpy() and _fmemset() */
-
-#define NEED_FHEAPMIN		/* far heap management routines are broken */
-
-#define SHORTxLCONST_32		/* enable compiler-specific DCT optimization */
-/* Note: the above define is known to improve the code with Microsoft C 6.00A.
- * I do not know whether it is good for later compiler versions.
- * Please report any info on this point to [email protected].
- */
-
-#endif /* JPEG_INTERNALS */
-
-#ifdef JPEG_CJPEG_DJPEG
-
-#define BMP_SUPPORTED		/* BMP image file format */
-#define GIF_SUPPORTED		/* GIF image file format */
-#define PPM_SUPPORTED		/* PBMPLUS PPM/PGM image file format */
-#undef RLE_SUPPORTED		/* Utah RLE image file format */
-#define TARGA_SUPPORTED		/* Targa image file format */
-
-#define TWO_FILE_COMMANDLINE
-#define USE_SETMODE		/* Microsoft has setmode() */
-#define NEED_SIGNAL_CATCHER	/* Define this if you use jmemdos.c */
-#undef DONT_USE_B_MODE
-#undef PROGRESS_REPORT		/* optional */
-
-#endif /* JPEG_CJPEG_DJPEG */

Engine/lib/ljpeg/extras/jconfig.sas

@@ -1,43 +0,0 @@
-/* jconfig.sas --- jconfig.h for Amiga systems using SAS C 6.0 and up. */
-/* see jconfig.doc for explanations */
-
-#define HAVE_PROTOTYPES
-#define HAVE_UNSIGNED_CHAR
-#define HAVE_UNSIGNED_SHORT
-/* #define void char */
-/* #define const */
-#undef CHAR_IS_UNSIGNED
-#define HAVE_STDDEF_H
-#define HAVE_STDLIB_H
-#undef NEED_BSD_STRINGS
-#undef NEED_SYS_TYPES_H
-#undef NEED_FAR_POINTERS
-#undef NEED_SHORT_EXTERNAL_NAMES
-#undef INCOMPLETE_TYPES_BROKEN
-
-#ifdef JPEG_INTERNALS
-
-#undef RIGHT_SHIFT_IS_UNSIGNED
-
-#define TEMP_DIRECTORY "JPEGTMP:"	/* recommended setting for Amiga */
-
-#define NO_MKTEMP		/* SAS C doesn't have mktemp() */
-
-#define SHORTxSHORT_32		/* produces better DCT code with SAS C */
-
-#endif /* JPEG_INTERNALS */
-
-#ifdef JPEG_CJPEG_DJPEG
-
-#define BMP_SUPPORTED		/* BMP image file format */
-#define GIF_SUPPORTED		/* GIF image file format */
-#define PPM_SUPPORTED		/* PBMPLUS PPM/PGM image file format */
-#undef RLE_SUPPORTED		/* Utah RLE image file format */
-#define TARGA_SUPPORTED		/* Targa image file format */
-
-#define TWO_FILE_COMMANDLINE
-#define NEED_SIGNAL_CATCHER
-#undef DONT_USE_B_MODE
-#undef PROGRESS_REPORT		/* optional */
-
-#endif /* JPEG_CJPEG_DJPEG */

Engine/lib/ljpeg/extras/jconfig.st

@@ -1,42 +0,0 @@
-/* jconfig.st --- jconfig.h for Atari ST/STE/TT using Pure C or Turbo C. */
-/* see jconfig.doc for explanations */
-
-#define HAVE_PROTOTYPES
-#define HAVE_UNSIGNED_CHAR
-#define HAVE_UNSIGNED_SHORT
-/* #define void char */
-/* #define const */
-#undef CHAR_IS_UNSIGNED
-#define HAVE_STDDEF_H
-#define HAVE_STDLIB_H
-#undef NEED_BSD_STRINGS
-#undef NEED_SYS_TYPES_H
-#undef NEED_FAR_POINTERS
-#undef NEED_SHORT_EXTERNAL_NAMES
-#define INCOMPLETE_TYPES_BROKEN	/* suppress undefined-structure warnings */
-
-#ifdef JPEG_INTERNALS
-
-#undef RIGHT_SHIFT_IS_UNSIGNED
-
-#define ALIGN_TYPE  long	/* apparently double is a weird size? */
-
-#endif /* JPEG_INTERNALS */
-
-#ifdef JPEG_CJPEG_DJPEG
-
-#define BMP_SUPPORTED		/* BMP image file format */
-#define GIF_SUPPORTED		/* GIF image file format */
-#define PPM_SUPPORTED		/* PBMPLUS PPM/PGM image file format */
-#undef RLE_SUPPORTED		/* Utah RLE image file format */
-#define TARGA_SUPPORTED		/* Targa image file format */
-
-#define TWO_FILE_COMMANDLINE	/* optional -- undef if you like Unix style */
-/* Note: if you undef TWO_FILE_COMMANDLINE, you may need to define
- * USE_SETMODE.  Some Atari compilers require it, some do not.
- */
-#define NEED_SIGNAL_CATCHER	/* needed if you use jmemname.c */
-#undef DONT_USE_B_MODE
-#undef PROGRESS_REPORT		/* optional */
-
-#endif /* JPEG_CJPEG_DJPEG */

Engine/lib/ljpeg/extras/jconfig.vc

@@ -1,45 +0,0 @@
-/* jconfig.vc --- jconfig.h for Microsoft Visual C++ on Windows 95 or NT. */
-/* see jconfig.doc for explanations */
-
-#define HAVE_PROTOTYPES
-#define HAVE_UNSIGNED_CHAR
-#define HAVE_UNSIGNED_SHORT
-/* #define void char */
-/* #define const */
-#undef CHAR_IS_UNSIGNED
-#define HAVE_STDDEF_H
-#define HAVE_STDLIB_H
-#undef NEED_BSD_STRINGS
-#undef NEED_SYS_TYPES_H
-#undef NEED_FAR_POINTERS	/* we presume a 32-bit flat memory model */
-#undef NEED_SHORT_EXTERNAL_NAMES
-#undef INCOMPLETE_TYPES_BROKEN
-
-/* Define "boolean" as unsigned char, not int, per Windows custom */
-#ifndef __RPCNDR_H__		/* don't conflict if rpcndr.h already read */
-typedef unsigned char boolean;
-#endif
-#define HAVE_BOOLEAN		/* prevent jmorecfg.h from redefining it */
-
-
-#ifdef JPEG_INTERNALS
-
-#undef RIGHT_SHIFT_IS_UNSIGNED
-
-#endif /* JPEG_INTERNALS */
-
-#ifdef JPEG_CJPEG_DJPEG
-
-#define BMP_SUPPORTED		/* BMP image file format */
-#define GIF_SUPPORTED		/* GIF image file format */
-#define PPM_SUPPORTED		/* PBMPLUS PPM/PGM image file format */
-#undef RLE_SUPPORTED		/* Utah RLE image file format */
-#define TARGA_SUPPORTED		/* Targa image file format */
-
-#define TWO_FILE_COMMANDLINE	/* optional */
-#define USE_SETMODE		/* Microsoft has setmode() */
-#undef NEED_SIGNAL_CATCHER
-#undef DONT_USE_B_MODE
-#undef PROGRESS_REPORT		/* optional */
-
-#endif /* JPEG_CJPEG_DJPEG */

Engine/lib/ljpeg/extras/jconfig.vms

@@ -1,37 +0,0 @@
-/* jconfig.vms --- jconfig.h for use on Digital VMS. */
-/* see jconfig.doc for explanations */
-
-#define HAVE_PROTOTYPES
-#define HAVE_UNSIGNED_CHAR
-#define HAVE_UNSIGNED_SHORT
-/* #define void char */
-/* #define const */
-#undef CHAR_IS_UNSIGNED
-#define HAVE_STDDEF_H
-#define HAVE_STDLIB_H
-#undef NEED_BSD_STRINGS
-#undef NEED_SYS_TYPES_H
-#undef NEED_FAR_POINTERS
-#undef NEED_SHORT_EXTERNAL_NAMES
-#undef INCOMPLETE_TYPES_BROKEN
-
-#ifdef JPEG_INTERNALS
-
-#undef RIGHT_SHIFT_IS_UNSIGNED
-
-#endif /* JPEG_INTERNALS */
-
-#ifdef JPEG_CJPEG_DJPEG
-
-#define BMP_SUPPORTED		/* BMP image file format */
-#define GIF_SUPPORTED		/* GIF image file format */
-#define PPM_SUPPORTED		/* PBMPLUS PPM/PGM image file format */
-#undef RLE_SUPPORTED		/* Utah RLE image file format */
-#define TARGA_SUPPORTED		/* Targa image file format */
-
-#define TWO_FILE_COMMANDLINE	/* Needed on VMS */
-#undef NEED_SIGNAL_CATCHER
-#undef DONT_USE_B_MODE
-#undef PROGRESS_REPORT		/* optional */
-
-#endif /* JPEG_CJPEG_DJPEG */

Engine/lib/ljpeg/extras/jconfig.wat

@@ -1,38 +0,0 @@
-/* jconfig.wat --- jconfig.h for Watcom C/C++ on MS-DOS or OS/2. */
-/* see jconfig.doc for explanations */
-
-#define HAVE_PROTOTYPES
-#define HAVE_UNSIGNED_CHAR
-#define HAVE_UNSIGNED_SHORT
-/* #define void char */
-/* #define const */
-#define CHAR_IS_UNSIGNED
-#define HAVE_STDDEF_H
-#define HAVE_STDLIB_H
-#undef NEED_BSD_STRINGS
-#undef NEED_SYS_TYPES_H
-#undef NEED_FAR_POINTERS	/* Watcom uses flat 32-bit addressing */
-#undef NEED_SHORT_EXTERNAL_NAMES
-#undef INCOMPLETE_TYPES_BROKEN
-
-#ifdef JPEG_INTERNALS
-
-#undef RIGHT_SHIFT_IS_UNSIGNED
-
-#endif /* JPEG_INTERNALS */
-
-#ifdef JPEG_CJPEG_DJPEG
-
-#define BMP_SUPPORTED		/* BMP image file format */
-#define GIF_SUPPORTED		/* GIF image file format */
-#define PPM_SUPPORTED		/* PBMPLUS PPM/PGM image file format */
-#undef RLE_SUPPORTED		/* Utah RLE image file format */
-#define TARGA_SUPPORTED		/* Targa image file format */
-
-#undef TWO_FILE_COMMANDLINE	/* optional */
-#define USE_SETMODE		/* Needed to make one-file style work in Watcom */
-#undef NEED_SIGNAL_CATCHER	/* Define this if you use jmemname.c */
-#undef DONT_USE_B_MODE
-#undef PROGRESS_REPORT		/* optional */
-
-#endif /* JPEG_CJPEG_DJPEG */

Engine/lib/ljpeg/extras/jmemdosa.asm

@@ -1,379 +0,0 @@
-;
-; jmemdosa.asm
-;
-; Copyright (C) 1992, Thomas G. Lane.
-; This file is part of the Independent JPEG Group's software.
-; For conditions of distribution and use, see the accompanying README file.
-;
-; This file contains low-level interface routines to support the MS-DOS
-; backing store manager (jmemdos.c).  Routines are provided to access disk
-; files through direct DOS calls, and to access XMS and EMS drivers.
-;
-; This file should assemble with Microsoft's MASM or any compatible
-; assembler (including Borland's Turbo Assembler).  If you haven't got
-; a compatible assembler, better fall back to jmemansi.c or jmemname.c.
-;
-; To minimize dependence on the C compiler's register usage conventions,
-; we save and restore all 8086 registers, even though most compilers only
-; require SI,DI,DS to be preserved.  Also, we use only 16-bit-wide return
-; values, which everybody returns in AX.
-;
-; Based on code contributed by Ge' Weijers.
-;
-
-JMEMDOSA_TXT	segment byte public 'CODE'
-
-		assume	cs:JMEMDOSA_TXT
-
-		public	_jdos_open
-		public	_jdos_close
-		public	_jdos_seek
-		public	_jdos_read
-		public	_jdos_write
-		public	_jxms_getdriver
-		public	_jxms_calldriver
-		public	_jems_available
-		public	_jems_calldriver
-
-;
-; short far jdos_open (short far * handle, char far * filename)
-;
-; Create and open a temporary file
-;
-_jdos_open	proc	far
-		push	bp			; linkage
-		mov 	bp,sp
-		push	si			; save all registers for safety
-		push	di
-		push	bx
-		push	cx
-		push	dx
-		push	es
-		push	ds
-		mov	cx,0			; normal file attributes
-		lds	dx,dword ptr [bp+10]	; get filename pointer
-		mov	ah,3ch			; create file
-		int	21h
-		jc	open_err		; if failed, return error code
-		lds	bx,dword ptr [bp+6]	; get handle pointer
-		mov	word ptr [bx],ax	; save the handle
-		xor	ax,ax			; return zero for OK
-open_err:	pop	ds			; restore registers and exit
-		pop	es
-		pop	dx
-		pop	cx
-		pop	bx
-		pop	di
-		pop	si
-		pop 	bp
-		ret
-_jdos_open	endp
-
-
-;
-; short far jdos_close (short handle)
-;
-; Close the file handle
-;
-_jdos_close	proc	far
-		push	bp			; linkage
-		mov 	bp,sp
-		push	si			; save all registers for safety
-		push	di
-		push	bx
-		push	cx
-		push	dx
-		push	es
-		push	ds
-		mov	bx,word ptr [bp+6]	; file handle
-		mov	ah,3eh			; close file
-		int	21h
-		jc	close_err		; if failed, return error code
-		xor	ax,ax			; return zero for OK
-close_err:	pop	ds			; restore registers and exit
-		pop	es
-		pop	dx
-		pop	cx
-		pop	bx
-		pop	di
-		pop	si
-		pop 	bp
-		ret
-_jdos_close	endp
-
-
-;
-; short far jdos_seek (short handle, long offset)
-;
-; Set file position
-;
-_jdos_seek	proc	far
-		push	bp			; linkage
-		mov 	bp,sp
-		push	si			; save all registers for safety
-		push	di
-		push	bx
-		push	cx
-		push	dx
-		push	es
-		push	ds
-		mov	bx,word ptr [bp+6]	; file handle
-		mov	dx,word ptr [bp+8]	; LS offset
-		mov	cx,word ptr [bp+10]	; MS offset
-		mov	ax,4200h		; absolute seek
-		int	21h
-		jc	seek_err		; if failed, return error code
-		xor	ax,ax			; return zero for OK
-seek_err:	pop	ds			; restore registers and exit
-		pop	es
-		pop	dx
-		pop	cx
-		pop	bx
-		pop	di
-		pop	si
-		pop 	bp
-		ret
-_jdos_seek	endp
-
-
-;
-; short far jdos_read (short handle, void far * buffer, unsigned short count)
-;
-; Read from file
-;
-_jdos_read	proc	far
-		push	bp			; linkage
-		mov 	bp,sp
-		push	si			; save all registers for safety
-		push	di
-		push	bx
-		push	cx
-		push	dx
-		push	es
-		push	ds
-		mov	bx,word ptr [bp+6]	; file handle
-		lds	dx,dword ptr [bp+8]	; buffer address
-		mov	cx,word ptr [bp+12]	; number of bytes
-		mov	ah,3fh			; read file
-		int	21h
-		jc	read_err		; if failed, return error code
-		cmp	ax,word ptr [bp+12]	; make sure all bytes were read
-		je	read_ok
-		mov	ax,1			; else return 1 for not OK
-		jmp	short read_err
-read_ok:	xor	ax,ax			; return zero for OK
-read_err:	pop	ds			; restore registers and exit
-		pop	es
-		pop	dx
-		pop	cx
-		pop	bx
-		pop	di
-		pop	si
-		pop 	bp
-		ret
-_jdos_read	endp
-
-
-;
-; short far jdos_write (short handle, void far * buffer, unsigned short count)
-;
-; Write to file
-;
-_jdos_write	proc	far
-		push	bp			; linkage
-		mov 	bp,sp
-		push	si			; save all registers for safety
-		push	di
-		push	bx
-		push	cx
-		push	dx
-		push	es
-		push	ds
-		mov	bx,word ptr [bp+6]	; file handle
-		lds	dx,dword ptr [bp+8]	; buffer address
-		mov	cx,word ptr [bp+12]	; number of bytes
-		mov	ah,40h			; write file
-		int	21h
-		jc	write_err		; if failed, return error code
-		cmp	ax,word ptr [bp+12]	; make sure all bytes written
-		je	write_ok
-		mov	ax,1			; else return 1 for not OK
-		jmp	short write_err
-write_ok:	xor	ax,ax			; return zero for OK
-write_err:	pop	ds			; restore registers and exit
-		pop	es
-		pop	dx
-		pop	cx
-		pop	bx
-		pop	di
-		pop	si
-		pop 	bp
-		ret
-_jdos_write	endp
-
-
-;
-; void far jxms_getdriver (XMSDRIVER far *)
-;
-; Get the address of the XMS driver, or NULL if not available
-;
-_jxms_getdriver	proc	far
-		push	bp			; linkage
-		mov 	bp,sp
-		push	si			; save all registers for safety
-		push	di
-		push	bx
-		push	cx
-		push	dx
-		push	es
-		push	ds
-		mov 	ax,4300h		; call multiplex interrupt with
-		int	2fh			; a magic cookie, hex 4300
-		cmp 	al,80h			; AL should contain hex 80
-		je	xmsavail
-		xor 	dx,dx			; no XMS driver available
-		xor 	ax,ax			; return a nil pointer
-		jmp	short xmsavail_done
-xmsavail:	mov 	ax,4310h		; fetch driver address with
-		int	2fh			; another magic cookie
-		mov 	dx,es			; copy address to dx:ax
-		mov 	ax,bx
-xmsavail_done:	les 	bx,dword ptr [bp+6]	; get pointer to return value
-		mov	word ptr es:[bx],ax
-		mov	word ptr es:[bx+2],dx
-		pop	ds			; restore registers and exit
-		pop	es
-		pop	dx
-		pop	cx
-		pop	bx
-		pop	di
-		pop	si
-		pop	bp
-		ret
-_jxms_getdriver	endp
-
-
-;
-; void far jxms_calldriver (XMSDRIVER, XMScontext far *)
-;
-; The XMScontext structure contains values for the AX,DX,BX,SI,DS registers.
-; These are loaded, the XMS call is performed, and the new values of the
-; AX,DX,BX registers are written back to the context structure.
-;
-_jxms_calldriver 	proc	far
-		push	bp			; linkage
-		mov 	bp,sp
-		push	si			; save all registers for safety
-		push	di
-		push	bx
-		push	cx
-		push	dx
-		push	es
-		push	ds
-		les 	bx,dword ptr [bp+10]	; get XMScontext pointer
-		mov 	ax,word ptr es:[bx]	; load registers
-		mov 	dx,word ptr es:[bx+2]
-		mov 	si,word ptr es:[bx+6]
-		mov 	ds,word ptr es:[bx+8]
-		mov 	bx,word ptr es:[bx+4]
-		call	dword ptr [bp+6]	; call the driver
-		mov	cx,bx			; save returned BX for a sec
-		les 	bx,dword ptr [bp+10]	; get XMScontext pointer
-		mov 	word ptr es:[bx],ax	; put back ax,dx,bx
-		mov 	word ptr es:[bx+2],dx
-		mov 	word ptr es:[bx+4],cx
-		pop	ds			; restore registers and exit
-		pop	es
-		pop	dx
-		pop	cx
-		pop	bx
-		pop	di
-		pop	si
-		pop 	bp
-		ret
-_jxms_calldriver 	endp
-
-
-;
-; short far jems_available (void)
-;
-; Have we got an EMS driver? (this comes straight from the EMS 4.0 specs)
-;
-_jems_available	proc	far
-		push	si			; save all registers for safety
-		push	di
-		push	bx
-		push	cx
-		push	dx
-		push	es
-		push	ds
-		mov	ax,3567h		; get interrupt vector 67h
-		int	21h
-		push	cs
-		pop	ds
-		mov	di,000ah		; check offs 10 in returned seg
-		lea	si,ASCII_device_name	; against literal string
-		mov	cx,8
-		cld
-		repe cmpsb
-		jne	no_ems
-		mov	ax,1			; match, it's there
-		jmp	short avail_done
-no_ems:		xor	ax,ax			; it's not there
-avail_done:	pop	ds			; restore registers and exit
-		pop	es
-		pop	dx
-		pop	cx
-		pop	bx
-		pop	di
-		pop	si
-		ret
-
-ASCII_device_name	db	"EMMXXXX0"
-
-_jems_available	endp
-
-
-;
-; void far jems_calldriver (EMScontext far *)
-;
-; The EMScontext structure contains values for the AX,DX,BX,SI,DS registers.
-; These are loaded, the EMS trap is performed, and the new values of the
-; AX,DX,BX registers are written back to the context structure.
-;
-_jems_calldriver	proc far
-		push	bp			; linkage
-		mov 	bp,sp
-		push	si			; save all registers for safety
-		push	di
-		push	bx
-		push	cx
-		push	dx
-		push	es
-		push	ds
-		les 	bx,dword ptr [bp+6]	; get EMScontext pointer
-		mov 	ax,word ptr es:[bx]	; load registers
-		mov 	dx,word ptr es:[bx+2]
-		mov 	si,word ptr es:[bx+6]
-		mov 	ds,word ptr es:[bx+8]
-		mov 	bx,word ptr es:[bx+4]
-		int	67h			; call the EMS driver
-		mov	cx,bx			; save returned BX for a sec
-		les 	bx,dword ptr [bp+6]	; get EMScontext pointer
-		mov 	word ptr es:[bx],ax	; put back ax,dx,bx
-		mov 	word ptr es:[bx+2],dx
-		mov 	word ptr es:[bx+4],cx
-		pop	ds			; restore registers and exit
-		pop	es
-		pop	dx
-		pop	cx
-		pop	bx
-		pop	di
-		pop	si
-		pop 	bp
-		ret
-_jems_calldriver	endp
-
-JMEMDOSA_TXT	ends
-
-		end

Engine/lib/ljpeg/extras/jpegtran.1

@@ -1,238 +0,0 @@
-.TH JPEGTRAN 1 "3 August 1997"
-.SH NAME
-jpegtran \- lossless transformation of JPEG files
-.SH SYNOPSIS
-.B jpegtran
-[
-.I options
-]
-[
-.I filename
-]
-.LP
-.SH DESCRIPTION
-.LP
-.B jpegtran
-performs various useful transformations of JPEG files.
-It can translate the coded representation from one variant of JPEG to another,
-for example from baseline JPEG to progressive JPEG or vice versa.  It can also
-perform some rearrangements of the image data, for example turning an image
-from landscape to portrait format by rotation.
-.PP
-.B jpegtran
-works by rearranging the compressed data (DCT coefficients), without
-ever fully decoding the image.  Therefore, its transformations are lossless:
-there is no image degradation at all, which would not be true if you used
-.B djpeg
-followed by
-.B cjpeg
-to accomplish the same conversion.  But by the same token,
-.B jpegtran
-cannot perform lossy operations such as changing the image quality.
-.PP
-.B jpegtran
-reads the named JPEG/JFIF file, or the standard input if no file is
-named, and produces a JPEG/JFIF file on the standard output.
-.SH OPTIONS
-All switch names may be abbreviated; for example,
-.B \-optimize
-may be written
-.B \-opt
-or
-.BR \-o .
-Upper and lower case are equivalent.
-British spellings are also accepted (e.g.,
-.BR \-optimise ),
-though for brevity these are not mentioned below.
-.PP
-To specify the coded JPEG representation used in the output file,
-.B jpegtran
-accepts a subset of the switches recognized by
-.BR cjpeg :
-.TP
-.B \-optimize
-Perform optimization of entropy encoding parameters.
-.TP
-.B \-progressive
-Create progressive JPEG file.
-.TP
-.BI \-restart " N"
-Emit a JPEG restart marker every N MCU rows, or every N MCU blocks if "B" is
-attached to the number.
-.TP
-.BI \-scans " file"
-Use the scan script given in the specified text file.
-.PP
-See
-.BR cjpeg (1)
-for more details about these switches.
-If you specify none of these switches, you get a plain baseline-JPEG output
-file.  The quality setting and so forth are determined by the input file.
-.PP
-The image can be losslessly transformed by giving one of these switches:
-.TP
-.B \-flip horizontal
-Mirror image horizontally (left-right).
-.TP
-.B \-flip vertical
-Mirror image vertically (top-bottom).
-.TP
-.B \-rotate 90
-Rotate image 90 degrees clockwise.
-.TP
-.B \-rotate 180
-Rotate image 180 degrees.
-.TP
-.B \-rotate 270
-Rotate image 270 degrees clockwise (or 90 ccw).
-.TP
-.B \-transpose
-Transpose image (across UL-to-LR axis).
-.TP
-.B \-transverse
-Transverse transpose (across UR-to-LL axis).
-.PP
-The transpose transformation has no restrictions regarding image dimensions.
-The other transformations operate rather oddly if the image dimensions are not
-a multiple of the iMCU size (usually 8 or 16 pixels), because they can only
-transform complete blocks of DCT coefficient data in the desired way.
-.PP
-.BR jpegtran 's
-default behavior when transforming an odd-size image is designed
-to preserve exact reversibility and mathematical consistency of the
-transformation set.  As stated, transpose is able to flip the entire image
-area.  Horizontal mirroring leaves any partial iMCU column at the right edge
-untouched, but is able to flip all rows of the image.  Similarly, vertical
-mirroring leaves any partial iMCU row at the bottom edge untouched, but is
-able to flip all columns.  The other transforms can be built up as sequences
-of transpose and flip operations; for consistency, their actions on edge
-pixels are defined to be the same as the end result of the corresponding
-transpose-and-flip sequence.
-.PP
-For practical use, you may prefer to discard any untransformable edge pixels
-rather than having a strange-looking strip along the right and/or bottom edges
-of a transformed image.  To do this, add the
-.B \-trim
-switch:
-.TP
-.B \-trim
-Drop non-transformable edge blocks.
-.PP
-Obviously, a transformation with
-.B \-trim
-is not reversible, so strictly speaking
-.B jpegtran
-with this switch is not lossless.  Also, the expected mathematical
-equivalences between the transformations no longer hold.  For example,
-.B \-rot 270 -trim
-trims only the bottom edge, but
-.B \-rot 90 -trim
-followed by
-.B \-rot 180 -trim
-trims both edges.
-.PP
-Another not-strictly-lossless transformation switch is:
-.TP
-.B \-grayscale
-Force grayscale output.
-.PP
-This option discards the chrominance channels if the input image is YCbCr
-(ie, a standard color JPEG), resulting in a grayscale JPEG file.  The
-luminance channel is preserved exactly, so this is a better method of reducing
-to grayscale than decompression, conversion, and recompression.  This switch
-is particularly handy for fixing a monochrome picture that was mistakenly
-encoded as a color JPEG.  (In such a case, the space savings from getting rid
-of the near-empty chroma channels won't be large; but the decoding time for
-a grayscale JPEG is substantially less than that for a color JPEG.)
-.PP
-.B jpegtran
-also recognizes these switches that control what to do with "extra" markers,
-such as comment blocks:
-.TP
-.B \-copy none
-Copy no extra markers from source file.  This setting suppresses all
-comments and other excess baggage present in the source file.
-.TP
-.B \-copy comments
-Copy only comment markers.  This setting copies comments from the source file,
-but discards any other inessential data.
-.TP
-.B \-copy all
-Copy all extra markers.  This setting preserves miscellaneous markers
-found in the source file, such as JFIF thumbnails and Photoshop settings.
-In some files these extra markers can be sizable.
-.PP
-The default behavior is
-.BR "\-copy comments" .
-(Note: in IJG releases v6 and v6a,
-.B jpegtran
-always did the equivalent of
-.BR "\-copy none" .)
-.PP
-Additional switches recognized by jpegtran are:
-.TP
-.BI \-maxmemory " N"
-Set limit for amount of memory to use in processing large images.  Value is
-in thousands of bytes, or millions of bytes if "M" is attached to the
-number.  For example,
-.B \-max 4m
-selects 4000000 bytes.  If more space is needed, temporary files will be used.
-.TP
-.BI \-outfile " name"
-Send output image to the named file, not to standard output.
-.TP
-.B \-verbose
-Enable debug printout.  More
-.BR \-v 's
-give more output.  Also, version information is printed at startup.
-.TP
-.B \-debug
-Same as
-.BR \-verbose .
-.SH EXAMPLES
-.LP
-This example converts a baseline JPEG file to progressive form:
-.IP
-.B jpegtran \-progressive
-.I foo.jpg
-.B >
-.I fooprog.jpg
-.PP
-This example rotates an image 90 degrees clockwise, discarding any
-unrotatable edge pixels:
-.IP
-.B jpegtran \-rot 90 -trim
-.I foo.jpg
-.B >
-.I foo90.jpg
-.SH ENVIRONMENT
-.TP
-.B JPEGMEM
-If this environment variable is set, its value is the default memory limit.
-The value is specified as described for the
-.B \-maxmemory
-switch.
-.B JPEGMEM
-overrides the default value specified when the program was compiled, and
-itself is overridden by an explicit
-.BR \-maxmemory .
-.SH SEE ALSO
-.BR cjpeg (1),
-.BR djpeg (1),
-.BR rdjpgcom (1),
-.BR wrjpgcom (1)
-.br
-Wallace, Gregory K.  "The JPEG Still Picture Compression Standard",
-Communications of the ACM, April 1991 (vol. 34, no. 4), pp. 30-44.
-.SH AUTHOR
-Independent JPEG Group
-.SH BUGS
-Arithmetic coding is not supported for legal reasons.
-.PP
-The transform options can't transform odd-size images perfectly.  Use
-.B \-trim
-if you don't like the results without it.
-.PP
-The entire image is read into memory and then written out again, even in
-cases where this isn't really necessary.  Expect swapping on large images,
-especially when using the more complex transform options.

Engine/lib/ljpeg/extras/libjpeg.doc

@@ -1,3006 +0,0 @@
-USING THE IJG JPEG LIBRARY
-
-Copyright (C) 1994-1998, Thomas G. Lane.
-This file is part of the Independent JPEG Group's software.
-For conditions of distribution and use, see the accompanying README file.
-
-
-This file describes how to use the IJG JPEG library within an application
-program.  Read it if you want to write a program that uses the library.
-
-The file example.c provides heavily commented skeleton code for calling the
-JPEG library.  Also see jpeglib.h (the include file to be used by application
-programs) for full details about data structures and function parameter lists.
-The library source code, of course, is the ultimate reference.
-
-Note that there have been *major* changes from the application interface
-presented by IJG version 4 and earlier versions.  The old design had several
-inherent limitations, and it had accumulated a lot of cruft as we added
-features while trying to minimize application-interface changes.  We have
-sacrificed backward compatibility in the version 5 rewrite, but we think the
-improvements justify this.
-
-
-TABLE OF CONTENTS
------------------
-
-Overview:
-	Functions provided by the library
-	Outline of typical usage
-Basic library usage:
-	Data formats
-	Compression details
-	Decompression details
-	Mechanics of usage: include files, linking, etc
-Advanced features:
-	Compression parameter selection
-	Decompression parameter selection
-	Special color spaces
-	Error handling
-	Compressed data handling (source and destination managers)
-	I/O suspension
-	Progressive JPEG support
-	Buffered-image mode
-	Abbreviated datastreams and multiple images
-	Special markers
-	Raw (downsampled) image data
-	Really raw data: DCT coefficients
-	Progress monitoring
-	Memory management
-	Memory usage
-	Library compile-time options
-	Portability considerations
-	Notes for MS-DOS implementors
-
-You should read at least the overview and basic usage sections before trying
-to program with the library.  The sections on advanced features can be read
-if and when you need them.
-
-
-OVERVIEW
-========
-
-Functions provided by the library
----------------------------------
-
-The IJG JPEG library provides C code to read and write JPEG-compressed image
-files.  The surrounding application program receives or supplies image data a
-scanline at a time, using a straightforward uncompressed image format.  All
-details of color conversion and other preprocessing/postprocessing can be
-handled by the library.
-
-The library includes a substantial amount of code that is not covered by the
-JPEG standard but is necessary for typical applications of JPEG.  These
-functions preprocess the image before JPEG compression or postprocess it after
-decompression.  They include colorspace conversion, downsampling/upsampling,
-and color quantization.  The application indirectly selects use of this code
-by specifying the format in which it wishes to supply or receive image data.
-For example, if colormapped output is requested, then the decompression
-library automatically invokes color quantization.
-
-A wide range of quality vs. speed tradeoffs are possible in JPEG processing,
-and even more so in decompression postprocessing.  The decompression library
-provides multiple implementations that cover most of the useful tradeoffs,
-ranging from very-high-quality down to fast-preview operation.  On the
-compression side we have generally not provided low-quality choices, since
-compression is normally less time-critical.  It should be understood that the
-low-quality modes may not meet the JPEG standard's accuracy requirements;
-nonetheless, they are useful for viewers.
-
-A word about functions *not* provided by the library.  We handle a subset of
-the ISO JPEG standard; most baseline, extended-sequential, and progressive
-JPEG processes are supported.  (Our subset includes all features now in common
-use.)  Unsupported ISO options include:
-	* Hierarchical storage
-	* Lossless JPEG
-	* Arithmetic entropy coding (unsupported for legal reasons)
-	* DNL marker
-	* Nonintegral subsampling ratios
-We support both 8- and 12-bit data precision, but this is a compile-time
-choice rather than a run-time choice; hence it is difficult to use both
-precisions in a single application.
-
-By itself, the library handles only interchange JPEG datastreams --- in
-particular the widely used JFIF file format.  The library can be used by
-surrounding code to process interchange or abbreviated JPEG datastreams that
-are embedded in more complex file formats.  (For example, this library is
-used by the free LIBTIFF library to support JPEG compression in TIFF.)
-
-
-Outline of typical usage
-------------------------
-
-The rough outline of a JPEG compression operation is:
-
-	Allocate and initialize a JPEG compression object
-	Specify the destination for the compressed data (eg, a file)
-	Set parameters for compression, including image size & colorspace
-	jpeg_start_compress(...);
-	while (scan lines remain to be written)
-		jpeg_write_scanlines(...);
-	jpeg_finish_compress(...);
-	Release the JPEG compression object
-
-A JPEG compression object holds parameters and working state for the JPEG
-library.  We make creation/destruction of the object separate from starting
-or finishing compression of an image; the same object can be re-used for a
-series of image compression operations.  This makes it easy to re-use the
-same parameter settings for a sequence of images.  Re-use of a JPEG object
-also has important implications for processing abbreviated JPEG datastreams,
-as discussed later.
-
-The image data to be compressed is supplied to jpeg_write_scanlines() from
-in-memory buffers.  If the application is doing file-to-file compression,
-reading image data from the source file is the application's responsibility.
-The library emits compressed data by calling a "data destination manager",
-which typically will write the data into a file; but the application can
-provide its own destination manager to do something else.
-
-Similarly, the rough outline of a JPEG decompression operation is:
-
-	Allocate and initialize a JPEG decompression object
-	Specify the source of the compressed data (eg, a file)
-	Call jpeg_read_header() to obtain image info
-	Set parameters for decompression
-	jpeg_start_decompress(...);
-	while (scan lines remain to be read)
-		jpeg_read_scanlines(...);
-	jpeg_finish_decompress(...);
-	Release the JPEG decompression object
-
-This is comparable to the compression outline except that reading the
-datastream header is a separate step.  This is helpful because information
-about the image's size, colorspace, etc is available when the application
-selects decompression parameters.  For example, the application can choose an
-output scaling ratio that will fit the image into the available screen size.
-
-The decompression library obtains compressed data by calling a data source
-manager, which typically will read the data from a file; but other behaviors
-can be obtained with a custom source manager.  Decompressed data is delivered
-into in-memory buffers passed to jpeg_read_scanlines().
-
-It is possible to abort an incomplete compression or decompression operation
-by calling jpeg_abort(); or, if you do not need to retain the JPEG object,
-simply release it by calling jpeg_destroy().
-
-JPEG compression and decompression objects are two separate struct types.
-However, they share some common fields, and certain routines such as
-jpeg_destroy() can work on either type of object.
-
-The JPEG library has no static variables: all state is in the compression
-or decompression object.  Therefore it is possible to process multiple
-compression and decompression operations concurrently, using multiple JPEG
-objects.
-
-Both compression and decompression can be done in an incremental memory-to-
-memory fashion, if suitable source/destination managers are used.  See the
-section on "I/O suspension" for more details.
-
-
-BASIC LIBRARY USAGE
-===================
-
-Data formats
-------------
-
-Before diving into procedural details, it is helpful to understand the
-image data format that the JPEG library expects or returns.
-
-The standard input image format is a rectangular array of pixels, with each
-pixel having the same number of "component" or "sample" values (color
-channels).  You must specify how many components there are and the colorspace
-interpretation of the components.  Most applications will use RGB data
-(three components per pixel) or grayscale data (one component per pixel).
-PLEASE NOTE THAT RGB DATA IS THREE SAMPLES PER PIXEL, GRAYSCALE ONLY ONE.
-A remarkable number of people manage to miss this, only to find that their
-programs don't work with grayscale JPEG files.
-
-There is no provision for colormapped input.  JPEG files are always full-color
-or full grayscale (or sometimes another colorspace such as CMYK).  You can
-feed in a colormapped image by expanding it to full-color format.  However
-JPEG often doesn't work very well with source data that has been colormapped,
-because of dithering noise.  This is discussed in more detail in the JPEG FAQ
-and the other references mentioned in the README file.
-
-Pixels are stored by scanlines, with each scanline running from left to
-right.  The component values for each pixel are adjacent in the row; for
-example, R,G,B,R,G,B,R,G,B,... for 24-bit RGB color.  Each scanline is an
-array of data type JSAMPLE --- which is typically "unsigned char", unless
-you've changed jmorecfg.h.  (You can also change the RGB pixel layout, say
-to B,G,R order, by modifying jmorecfg.h.  But see the restrictions listed in
-that file before doing so.)
-
-A 2-D array of pixels is formed by making a list of pointers to the starts of
-scanlines; so the scanlines need not be physically adjacent in memory.  Even
-if you process just one scanline at a time, you must make a one-element
-pointer array to conform to this structure.  Pointers to JSAMPLE rows are of
-type JSAMPROW, and the pointer to the pointer array is of type JSAMPARRAY.
-
-The library accepts or supplies one or more complete scanlines per call.
-It is not possible to process part of a row at a time.  Scanlines are always
-processed top-to-bottom.  You can process an entire image in one call if you
-have it all in memory, but usually it's simplest to process one scanline at
-a time.
-
-For best results, source data values should have the precision specified by
-BITS_IN_JSAMPLE (normally 8 bits).  For instance, if you choose to compress
-data that's only 6 bits/channel, you should left-justify each value in a
-byte before passing it to the compressor.  If you need to compress data
-that has more than 8 bits/channel, compile with BITS_IN_JSAMPLE = 12.
-(See "Library compile-time options", later.)
-
-
-The data format returned by the decompressor is the same in all details,
-except that colormapped output is supported.  (Again, a JPEG file is never
-colormapped.  But you can ask the decompressor to perform on-the-fly color
-quantization to deliver colormapped output.)  If you request colormapped
-output then the returned data array contains a single JSAMPLE per pixel;
-its value is an index into a color map.  The color map is represented as
-a 2-D JSAMPARRAY in which each row holds the values of one color component,
-that is, colormap[i][j] is the value of the i'th color component for pixel
-value (map index) j.  Note that since the colormap indexes are stored in
-JSAMPLEs, the maximum number of colors is limited by the size of JSAMPLE
-(ie, at most 256 colors for an 8-bit JPEG library).
-
-
-Compression details
--------------------
-
-Here we revisit the JPEG compression outline given in the overview.
-
-1. Allocate and initialize a JPEG compression object.
-
-A JPEG compression object is a "struct jpeg_compress_struct".  (It also has
-a bunch of subsidiary structures which are allocated via malloc(), but the
-application doesn't control those directly.)  This struct can be just a local
-variable in the calling routine, if a single routine is going to execute the
-whole JPEG compression sequence.  Otherwise it can be static or allocated
-from malloc().
-
-You will also need a structure representing a JPEG error handler.  The part
-of this that the library cares about is a "struct jpeg_error_mgr".  If you
-are providing your own error handler, you'll typically want to embed the
-jpeg_error_mgr struct in a larger structure; this is discussed later under
-"Error handling".  For now we'll assume you are just using the default error
-handler.  The default error handler will print JPEG error/warning messages
-on stderr, and it will call exit() if a fatal error occurs.
-
-You must initialize the error handler structure, store a pointer to it into
-the JPEG object's "err" field, and then call jpeg_create_compress() to
-initialize the rest of the JPEG object.
-
-Typical code for this step, if you are using the default error handler, is
-
-	struct jpeg_compress_struct cinfo;
-	struct jpeg_error_mgr jerr;
-	...
-	cinfo.err = jpeg_std_error(&jerr);
-	jpeg_create_compress(&cinfo);
-
-jpeg_create_compress allocates a small amount of memory, so it could fail
-if you are out of memory.  In that case it will exit via the error handler;
-that's why the error handler must be initialized first.
-
-
-2. Specify the destination for the compressed data (eg, a file).
-
-As previously mentioned, the JPEG library delivers compressed data to a
-"data destination" module.  The library includes one data destination
-module which knows how to write to a stdio stream.  You can use your own
-destination module if you want to do something else, as discussed later.
-
-If you use the standard destination module, you must open the target stdio
-stream beforehand.  Typical code for this step looks like:
-
-	FILE * outfile;
-	...
-	if ((outfile = fopen(filename, "wb")) == NULL) {
-	    fprintf(stderr, "can't open %s\n", filename);
-	    exit(1);
-	}
-	jpeg_stdio_dest(&cinfo, outfile);
-
-where the last line invokes the standard destination module.
-
-WARNING: it is critical that the binary compressed data be delivered to the
-output file unchanged.  On non-Unix systems the stdio library may perform
-newline translation or otherwise corrupt binary data.  To suppress this
-behavior, you may need to use a "b" option to fopen (as shown above), or use
-setmode() or another routine to put the stdio stream in binary mode.  See
-cjpeg.c and djpeg.c for code that has been found to work on many systems.
-
-You can select the data destination after setting other parameters (step 3),
-if that's more convenient.  You may not change the destination between
-calling jpeg_start_compress() and jpeg_finish_compress().
-
-
-3. Set parameters for compression, including image size & colorspace.
-
-You must supply information about the source image by setting the following
-fields in the JPEG object (cinfo structure):
-
-	image_width		Width of image, in pixels
-	image_height		Height of image, in pixels
-	input_components	Number of color channels (samples per pixel)
-	in_color_space		Color space of source image
-
-The image dimensions are, hopefully, obvious.  JPEG supports image dimensions
-of 1 to 64K pixels in either direction.  The input color space is typically
-RGB or grayscale, and input_components is 3 or 1 accordingly.  (See "Special
-color spaces", later, for more info.)  The in_color_space field must be
-assigned one of the J_COLOR_SPACE enum constants, typically JCS_RGB or
-JCS_GRAYSCALE.
-
-JPEG has a large number of compression parameters that determine how the
-image is encoded.  Most applications don't need or want to know about all
-these parameters.  You can set all the parameters to reasonable defaults by
-calling jpeg_set_defaults(); then, if there are particular values you want
-to change, you can do so after that.  The "Compression parameter selection"
-section tells about all the parameters.
-
-You must set in_color_space correctly before calling jpeg_set_defaults(),
-because the defaults depend on the source image colorspace.  However the
-other three source image parameters need not be valid until you call
-jpeg_start_compress().  There's no harm in calling jpeg_set_defaults() more
-than once, if that happens to be convenient.
-
-Typical code for a 24-bit RGB source image is
-
-	cinfo.image_width = Width; 	/* image width and height, in pixels */
-	cinfo.image_height = Height;
-	cinfo.input_components = 3;	/* # of color components per pixel */
-	cinfo.in_color_space = JCS_RGB; /* colorspace of input image */
-
-	jpeg_set_defaults(&cinfo);
-	/* Make optional parameter settings here */
-
-
-4. jpeg_start_compress(...);
-
-After you have established the data destination and set all the necessary
-source image info and other parameters, call jpeg_start_compress() to begin
-a compression cycle.  This will initialize internal state, allocate working
-storage, and emit the first few bytes of the JPEG datastream header.
-
-Typical code:
-
-	jpeg_start_compress(&cinfo, TRUE);
-
-The "TRUE" parameter ensures that a complete JPEG interchange datastream
-will be written.  This is appropriate in most cases.  If you think you might
-want to use an abbreviated datastream, read the section on abbreviated
-datastreams, below.
-
-Once you have called jpeg_start_compress(), you may not alter any JPEG
-parameters or other fields of the JPEG object until you have completed
-the compression cycle.
-
-
-5. while (scan lines remain to be written)
-	jpeg_write_scanlines(...);
-
-Now write all the required image data by calling jpeg_write_scanlines()
-one or more times.  You can pass one or more scanlines in each call, up
-to the total image height.  In most applications it is convenient to pass
-just one or a few scanlines at a time.  The expected format for the passed
-data is discussed under "Data formats", above.
-
-Image data should be written in top-to-bottom scanline order.  The JPEG spec
-contains some weasel wording about how top and bottom are application-defined
-terms (a curious interpretation of the English language...) but if you want
-your files to be compatible with everyone else's, you WILL use top-to-bottom
-order.  If the source data must be read in bottom-to-top order, you can use
-the JPEG library's virtual array mechanism to invert the data efficiently.
-Examples of this can be found in the sample application cjpeg.
-
-The library maintains a count of the number of scanlines written so far
-in the next_scanline field of the JPEG object.  Usually you can just use
-this variable as the loop counter, so that the loop test looks like
-"while (cinfo.next_scanline < cinfo.image_height)".
-
-Code for this step depends heavily on the way that you store the source data.
-example.c shows the following code for the case of a full-size 2-D source
-array containing 3-byte RGB pixels:
-
-	JSAMPROW row_pointer[1];	/* pointer to a single row */
-	int row_stride;			/* physical row width in buffer */
-
-	row_stride = image_width * 3;	/* JSAMPLEs per row in image_buffer */
-
-	while (cinfo.next_scanline < cinfo.image_height) {
-	    row_pointer[0] = & image_buffer[cinfo.next_scanline * row_stride];
-	    jpeg_write_scanlines(&cinfo, row_pointer, 1);
-	}
-
-jpeg_write_scanlines() returns the number of scanlines actually written.
-This will normally be equal to the number passed in, so you can usually
-ignore the return value.  It is different in just two cases:
-  * If you try to write more scanlines than the declared image height,
-    the additional scanlines are ignored.
-  * If you use a suspending data destination manager, output buffer overrun
-    will cause the compressor to return before accepting all the passed lines.
-    This feature is discussed under "I/O suspension", below.  The normal
-    stdio destination manager will NOT cause this to happen.
-In any case, the return value is the same as the change in the value of
-next_scanline.
-
-
-6. jpeg_finish_compress(...);
-
-After all the image data has been written, call jpeg_finish_compress() to
-complete the compression cycle.  This step is ESSENTIAL to ensure that the
-last bufferload of data is written to the data destination.
-jpeg_finish_compress() also releases working memory associated with the JPEG
-object.
-
-Typical code:
-
-	jpeg_finish_compress(&cinfo);
-
-If using the stdio destination manager, don't forget to close the output
-stdio stream (if necessary) afterwards.
-
-If you have requested a multi-pass operating mode, such as Huffman code
-optimization, jpeg_finish_compress() will perform the additional passes using
-data buffered by the first pass.  In this case jpeg_finish_compress() may take
-quite a while to complete.  With the default compression parameters, this will
-not happen.
-
-It is an error to call jpeg_finish_compress() before writing the necessary
-total number of scanlines.  If you wish to abort compression, call
-jpeg_abort() as discussed below.
-
-After completing a compression cycle, you may dispose of the JPEG object
-as discussed next, or you may use it to compress another image.  In that case
-return to step 2, 3, or 4 as appropriate.  If you do not change the
-destination manager, the new datastream will be written to the same target.
-If you do not change any JPEG parameters, the new datastream will be written
-with the same parameters as before.  Note that you can change the input image
-dimensions freely between cycles, but if you change the input colorspace, you
-should call jpeg_set_defaults() to adjust for the new colorspace; and then
-you'll need to repeat all of step 3.
-
-
-7. Release the JPEG compression object.
-
-When you are done with a JPEG compression object, destroy it by calling
-jpeg_destroy_compress().  This will free all subsidiary memory (regardless of
-the previous state of the object).  Or you can call jpeg_destroy(), which
-works for either compression or decompression objects --- this may be more
-convenient if you are sharing code between compression and decompression
-cases.  (Actually, these routines are equivalent except for the declared type
-of the passed pointer.  To avoid gripes from ANSI C compilers, jpeg_destroy()
-should be passed a j_common_ptr.)
-
-If you allocated the jpeg_compress_struct structure from malloc(), freeing
-it is your responsibility --- jpeg_destroy() won't.  Ditto for the error
-handler structure.
-
-Typical code:
-
-	jpeg_destroy_compress(&cinfo);
-
-
-8. Aborting.
-
-If you decide to abort a compression cycle before finishing, you can clean up
-in either of two ways:
-
-* If you don't need the JPEG object any more, just call
-  jpeg_destroy_compress() or jpeg_destroy() to release memory.  This is
-  legitimate at any point after calling jpeg_create_compress() --- in fact,
-  it's safe even if jpeg_create_compress() fails.
-
-* If you want to re-use the JPEG object, call jpeg_abort_compress(), or call
-  jpeg_abort() which works on both compression and decompression objects.
-  This will return the object to an idle state, releasing any working memory.
-  jpeg_abort() is allowed at any time after successful object creation.
-
-Note that cleaning up the data destination, if required, is your
-responsibility; neither of these routines will call term_destination().
-(See "Compressed data handling", below, for more about that.)
-
-jpeg_destroy() and jpeg_abort() are the only safe calls to make on a JPEG
-object that has reported an error by calling error_exit (see "Error handling"
-for more info).  The internal state of such an object is likely to be out of
-whack.  Either of these two routines will return the object to a known state.
-
-
-Decompression details
----------------------
-
-Here we revisit the JPEG decompression outline given in the overview.
-
-1. Allocate and initialize a JPEG decompression object.
-
-This is just like initialization for compression, as discussed above,
-except that the object is a "struct jpeg_decompress_struct" and you
-call jpeg_create_decompress().  Error handling is exactly the same.
-
-Typical code:
-
-	struct jpeg_decompress_struct cinfo;
-	struct jpeg_error_mgr jerr;
-	...
-	cinfo.err = jpeg_std_error(&jerr);
-	jpeg_create_decompress(&cinfo);
-
-(Both here and in the IJG code, we usually use variable name "cinfo" for
-both compression and decompression objects.)
-
-
-2. Specify the source of the compressed data (eg, a file).
-
-As previously mentioned, the JPEG library reads compressed data from a "data
-source" module.  The library includes one data source module which knows how
-to read from a stdio stream.  You can use your own source module if you want
-to do something else, as discussed later.
-
-If you use the standard source module, you must open the source stdio stream
-beforehand.  Typical code for this step looks like:
-
-	FILE * infile;
-	...
-	if ((infile = fopen(filename, "rb")) == NULL) {
-	    fprintf(stderr, "can't open %s\n", filename);
-	    exit(1);
-	}
-	jpeg_stdio_src(&cinfo, infile);
-
-where the last line invokes the standard source module.
-
-WARNING: it is critical that the binary compressed data be read unchanged.
-On non-Unix systems the stdio library may perform newline translation or
-otherwise corrupt binary data.  To suppress this behavior, you may need to use
-a "b" option to fopen (as shown above), or use setmode() or another routine to
-put the stdio stream in binary mode.  See cjpeg.c and djpeg.c for code that
-has been found to work on many systems.
-
-You may not change the data source between calling jpeg_read_header() and
-jpeg_finish_decompress().  If you wish to read a series of JPEG images from
-a single source file, you should repeat the jpeg_read_header() to
-jpeg_finish_decompress() sequence without reinitializing either the JPEG
-object or the data source module; this prevents buffered input data from
-being discarded.
-
-
-3. Call jpeg_read_header() to obtain image info.
-
-Typical code for this step is just
-
-	jpeg_read_header(&cinfo, TRUE);
-
-This will read the source datastream header markers, up to the beginning
-of the compressed data proper.  On return, the image dimensions and other
-info have been stored in the JPEG object.  The application may wish to
-consult this information before selecting decompression parameters.
-
-More complex code is necessary if
-  * A suspending data source is used --- in that case jpeg_read_header()
-    may return before it has read all the header data.  See "I/O suspension",
-    below.  The normal stdio source manager will NOT cause this to happen.
-  * Abbreviated JPEG files are to be processed --- see the section on
-    abbreviated datastreams.  Standard applications that deal only in
-    interchange JPEG files need not be concerned with this case either.
-
-It is permissible to stop at this point if you just wanted to find out the
-image dimensions and other header info for a JPEG file.  In that case,
-call jpeg_destroy() when you are done with the JPEG object, or call
-jpeg_abort() to return it to an idle state before selecting a new data
-source and reading another header.
-
-
-4. Set parameters for decompression.
-
-jpeg_read_header() sets appropriate default decompression parameters based on
-the properties of the image (in particular, its colorspace).  However, you
-may well want to alter these defaults before beginning the decompression.
-For example, the default is to produce full color output from a color file.
-If you want colormapped output you must ask for it.  Other options allow the
-returned image to be scaled and allow various speed/quality tradeoffs to be
-selected.  "Decompression parameter selection", below, gives details.
-
-If the defaults are appropriate, nothing need be done at this step.
-
-Note that all default values are set by each call to jpeg_read_header().
-If you reuse a decompression object, you cannot expect your parameter
-settings to be preserved across cycles, as you can for compression.
-You must set desired parameter values each time.
-
-
-5. jpeg_start_decompress(...);
-
-Once the parameter values are satisfactory, call jpeg_start_decompress() to
-begin decompression.  This will initialize internal state, allocate working
-memory, and prepare for returning data.
-
-Typical code is just
-
-	jpeg_start_decompress(&cinfo);
-
-If you have requested a multi-pass operating mode, such as 2-pass color
-quantization, jpeg_start_decompress() will do everything needed before data
-output can begin.  In this case jpeg_start_decompress() may take quite a while
-to complete.  With a single-scan (non progressive) JPEG file and default
-decompression parameters, this will not happen; jpeg_start_decompress() will
-return quickly.
-
-After this call, the final output image dimensions, including any requested
-scaling, are available in the JPEG object; so is the selected colormap, if
-colormapped output has been requested.  Useful fields include
-
-	output_width		image width and height, as scaled
-	output_height
-	out_color_components	# of color components in out_color_space
-	output_components	# of color components returned per pixel
-	colormap		the selected colormap, if any
-	actual_number_of_colors		number of entries in colormap
-
-output_components is 1 (a colormap index) when quantizing colors; otherwise it
-equals out_color_components.  It is the number of JSAMPLE values that will be
-emitted per pixel in the output arrays.
-
-Typically you will need to allocate data buffers to hold the incoming image.
-You will need output_width * output_components JSAMPLEs per scanline in your
-output buffer, and a total of output_height scanlines will be returned.
-
-Note: if you are using the JPEG library's internal memory manager to allocate
-data buffers (as djpeg does), then the manager's protocol requires that you
-request large buffers *before* calling jpeg_start_decompress().  This is a
-little tricky since the output_XXX fields are not normally valid then.  You
-can make them valid by calling jpeg_calc_output_dimensions() after setting the
-relevant parameters (scaling, output color space, and quantization flag).
-
-
-6. while (scan lines remain to be read)
-	jpeg_read_scanlines(...);
-
-Now you can read the decompressed image data by calling jpeg_read_scanlines()
-one or more times.  At each call, you pass in the maximum number of scanlines
-to be read (ie, the height of your working buffer); jpeg_read_scanlines()
-will return up to that many lines.  The return value is the number of lines
-actually read.  The format of the returned data is discussed under "Data
-formats", above.  Don't forget that grayscale and color JPEGs will return
-different data formats!
-
-Image data is returned in top-to-bottom scanline order.  If you must write
-out the image in bottom-to-top order, you can use the JPEG library's virtual
-array mechanism to invert the data efficiently.  Examples of this can be
-found in the sample application djpeg.
-
-The library maintains a count of the number of scanlines returned so far
-in the output_scanline field of the JPEG object.  Usually you can just use
-this variable as the loop counter, so that the loop test looks like
-"while (cinfo.output_scanline < cinfo.output_height)".  (Note that the test
-should NOT be against image_height, unless you never use scaling.  The
-image_height field is the height of the original unscaled image.)
-The return value always equals the change in the value of output_scanline.
-
-If you don't use a suspending data source, it is safe to assume that
-jpeg_read_scanlines() reads at least one scanline per call, until the
-bottom of the image has been reached.
-
-If you use a buffer larger than one scanline, it is NOT safe to assume that
-jpeg_read_scanlines() fills it.  (The current implementation returns only a
-few scanlines per call, no matter how large a buffer you pass.)  So you must
-always provide a loop that calls jpeg_read_scanlines() repeatedly until the
-whole image has been read.
-
-
-7. jpeg_finish_decompress(...);
-
-After all the image data has been read, call jpeg_finish_decompress() to
-complete the decompression cycle.  This causes working memory associated
-with the JPEG object to be released.
-
-Typical code:
-
-	jpeg_finish_decompress(&cinfo);
-
-If using the stdio source manager, don't forget to close the source stdio
-stream if necessary.
-
-It is an error to call jpeg_finish_decompress() before reading the correct
-total number of scanlines.  If you wish to abort decompression, call
-jpeg_abort() as discussed below.
-
-After completing a decompression cycle, you may dispose of the JPEG object as
-discussed next, or you may use it to decompress another image.  In that case
-return to step 2 or 3 as appropriate.  If you do not change the source
-manager, the next image will be read from the same source.
-
-
-8. Release the JPEG decompression object.
-
-When you are done with a JPEG decompression object, destroy it by calling
-jpeg_destroy_decompress() or jpeg_destroy().  The previous discussion of
-destroying compression objects applies here too.
-
-Typical code:
-
-	jpeg_destroy_decompress(&cinfo);
-
-
-9. Aborting.
-
-You can abort a decompression cycle by calling jpeg_destroy_decompress() or
-jpeg_destroy() if you don't need the JPEG object any more, or
-jpeg_abort_decompress() or jpeg_abort() if you want to reuse the object.
-The previous discussion of aborting compression cycles applies here too.
-
-
-Mechanics of usage: include files, linking, etc
------------------------------------------------
-
-Applications using the JPEG library should include the header file jpeglib.h
-to obtain declarations of data types and routines.  Before including
-jpeglib.h, include system headers that define at least the typedefs FILE and
-size_t.  On ANSI-conforming systems, including <stdio.h> is sufficient; on
-older Unix systems, you may need <sys/types.h> to define size_t.
-
-If the application needs to refer to individual JPEG library error codes, also
-include jerror.h to define those symbols.
-
-jpeglib.h indirectly includes the files jconfig.h and jmorecfg.h.  If you are
-installing the JPEG header files in a system directory, you will want to
-install all four files: jpeglib.h, jerror.h, jconfig.h, jmorecfg.h.
-
-The most convenient way to include the JPEG code into your executable program
-is to prepare a library file ("libjpeg.a", or a corresponding name on non-Unix
-machines) and reference it at your link step.  If you use only half of the
-library (only compression or only decompression), only that much code will be
-included from the library, unless your linker is hopelessly brain-damaged.
-The supplied makefiles build libjpeg.a automatically (see install.doc).
-
-While you can build the JPEG library as a shared library if the whim strikes
-you, we don't really recommend it.  The trouble with shared libraries is that
-at some point you'll probably try to substitute a new version of the library
-without recompiling the calling applications.  That generally doesn't work
-because the parameter struct declarations usually change with each new
-version.  In other words, the library's API is *not* guaranteed binary
-compatible across versions; we only try to ensure source-code compatibility.
-(In hindsight, it might have been smarter to hide the parameter structs from
-applications and introduce a ton of access functions instead.  Too late now,
-however.)
-
-On some systems your application may need to set up a signal handler to ensure
-that temporary files are deleted if the program is interrupted.  This is most
-critical if you are on MS-DOS and use the jmemdos.c memory manager back end;
-it will try to grab extended memory for temp files, and that space will NOT be
-freed automatically.  See cjpeg.c or djpeg.c for an example signal handler.
-
-It may be worth pointing out that the core JPEG library does not actually
-require the stdio library: only the default source/destination managers and
-error handler need it.  You can use the library in a stdio-less environment
-if you replace those modules and use jmemnobs.c (or another memory manager of
-your own devising).  More info about the minimum system library requirements
-may be found in jinclude.h.
-
-
-ADVANCED FEATURES
-=================
-
-Compression parameter selection
--------------------------------
-
-This section describes all the optional parameters you can set for JPEG
-compression, as well as the "helper" routines provided to assist in this
-task.  Proper setting of some parameters requires detailed understanding
-of the JPEG standard; if you don't know what a parameter is for, it's best
-not to mess with it!  See REFERENCES in the README file for pointers to
-more info about JPEG.
-
-It's a good idea to call jpeg_set_defaults() first, even if you plan to set
-all the parameters; that way your code is more likely to work with future JPEG
-libraries that have additional parameters.  For the same reason, we recommend
-you use a helper routine where one is provided, in preference to twiddling
-cinfo fields directly.
-
-The helper routines are:
-
-jpeg_set_defaults (j_compress_ptr cinfo)
-	This routine sets all JPEG parameters to reasonable defaults, using
-	only the input image's color space (field in_color_space, which must
-	already be set in cinfo).  Many applications will only need to use
-	this routine and perhaps jpeg_set_quality().
-
-jpeg_set_colorspace (j_compress_ptr cinfo, J_COLOR_SPACE colorspace)
-	Sets the JPEG file's colorspace (field jpeg_color_space) as specified,
-	and sets other color-space-dependent parameters appropriately.  See
-	"Special color spaces", below, before using this.  A large number of
-	parameters, including all per-component parameters, are set by this
-	routine; if you want to twiddle individual parameters you should call
-	jpeg_set_colorspace() before rather than after.
-
-jpeg_default_colorspace (j_compress_ptr cinfo)
-	Selects an appropriate JPEG colorspace based on cinfo->in_color_space,
-	and calls jpeg_set_colorspace().  This is actually a subroutine of
-	jpeg_set_defaults().  It's broken out in case you want to change
-	just the colorspace-dependent JPEG parameters.
-
-jpeg_set_quality (j_compress_ptr cinfo, int quality, boolean force_baseline)
-	Constructs JPEG quantization tables appropriate for the indicated
-	quality setting.  The quality value is expressed on the 0..100 scale
-	recommended by IJG (cjpeg's "-quality" switch uses this routine).
-	Note that the exact mapping from quality values to tables may change
-	in future IJG releases as more is learned about DCT quantization.
-	If the force_baseline parameter is TRUE, then the quantization table
-	entries are constrained to the range 1..255 for full JPEG baseline
-	compatibility.  In the current implementation, this only makes a
-	difference for quality settings below 25, and it effectively prevents
-	very small/low quality files from being generated.  The IJG decoder
-	is capable of reading the non-baseline files generated at low quality
-	settings when force_baseline is FALSE, but other decoders may not be.
-
-jpeg_set_linear_quality (j_compress_ptr cinfo, int scale_factor,
-			 boolean force_baseline)
-	Same as jpeg_set_quality() except that the generated tables are the
-	sample tables given in the JPEC spec section K.1, multiplied by the
-	specified scale factor (which is expressed as a percentage; thus
-	scale_factor = 100 reproduces the spec's tables).  Note that larger
-	scale factors give lower quality.  This entry point is useful for
-	conforming to the Adobe PostScript DCT conventions, but we do not
-	recommend linear scaling as a user-visible quality scale otherwise.
-	force_baseline again constrains the computed table entries to 1..255.
-
-int jpeg_quality_scaling (int quality)
-	Converts a value on the IJG-recommended quality scale to a linear
-	scaling percentage.  Note that this routine may change or go away
-	in future releases --- IJG may choose to adopt a scaling method that
-	can't be expressed as a simple scalar multiplier, in which case the
-	premise of this routine collapses.  Caveat user.
-
-jpeg_add_quant_table (j_compress_ptr cinfo, int which_tbl,
-		      const unsigned int *basic_table,
-		      int scale_factor, boolean force_baseline)
-	Allows an arbitrary quantization table to be created.  which_tbl
-	indicates which table slot to fill.  basic_table points to an array
-	of 64 unsigned ints given in normal array order.  These values are
-	multiplied by scale_factor/100 and then clamped to the range 1..65535
-	(or to 1..255 if force_baseline is TRUE).
-	CAUTION: prior to library version 6a, jpeg_add_quant_table expected
-	the basic table to be given in JPEG zigzag order.  If you need to
-	write code that works with either older or newer versions of this
-	routine, you must check the library version number.  Something like
-	"#if JPEG_LIB_VERSION >= 61" is the right test.
-
-jpeg_simple_progression (j_compress_ptr cinfo)
-	Generates a default scan script for writing a progressive-JPEG file.
-	This is the recommended method of creating a progressive file,
-	unless you want to make a custom scan sequence.  You must ensure that
-	the JPEG color space is set correctly before calling this routine.
-
-
-Compression parameters (cinfo fields) include:
-
-J_DCT_METHOD dct_method
-	Selects the algorithm used for the DCT step.  Choices are:
-		JDCT_ISLOW: slow but accurate integer algorithm
-		JDCT_IFAST: faster, less accurate integer method
-		JDCT_FLOAT: floating-point method
-		JDCT_DEFAULT: default method (normally JDCT_ISLOW)
-		JDCT_FASTEST: fastest method (normally JDCT_IFAST)
-	The FLOAT method is very slightly more accurate than the ISLOW method,
-	but may give different results on different machines due to varying
-	roundoff behavior.  The integer methods should give the same results
-	on all machines.  On machines with sufficiently fast FP hardware, the
-	floating-point method may also be the fastest.  The IFAST method is
-	considerably less accurate than the other two; its use is not
-	recommended if high quality is a concern.  JDCT_DEFAULT and
-	JDCT_FASTEST are macros configurable by each installation.
-
-J_COLOR_SPACE jpeg_color_space
-int num_components
-	The JPEG color space and corresponding number of components; see
-	"Special color spaces", below, for more info.  We recommend using
-	jpeg_set_color_space() if you want to change these.
-
-boolean optimize_coding
-	TRUE causes the compressor to compute optimal Huffman coding tables
-	for the image.  This requires an extra pass over the data and
-	therefore costs a good deal of space and time.  The default is
-	FALSE, which tells the compressor to use the supplied or default
-	Huffman tables.  In most cases optimal tables save only a few percent
-	of file size compared to the default tables.  Note that when this is
-	TRUE, you need not supply Huffman tables at all, and any you do
-	supply will be overwritten.
-
-unsigned int restart_interval
-int restart_in_rows
-	To emit restart markers in the JPEG file, set one of these nonzero.
-	Set restart_interval to specify the exact interval in MCU blocks.
-	Set restart_in_rows to specify the interval in MCU rows.  (If
-	restart_in_rows is not 0, then restart_interval is set after the
-	image width in MCUs is computed.)  Defaults are zero (no restarts).
-	One restart marker per MCU row is often a good choice.
-	NOTE: the overhead of restart markers is higher in grayscale JPEG
-	files than in color files, and MUCH higher in progressive JPEGs.
-	If you use restarts, you may want to use larger intervals in those
-	cases.
-
-const jpeg_scan_info * scan_info
-int num_scans
-	By default, scan_info is NULL; this causes the compressor to write a
-	single-scan sequential JPEG file.  If not NULL, scan_info points to
-	an array of scan definition records of length num_scans.  The
-	compressor will then write a JPEG file having one scan for each scan
-	definition record.  This is used to generate noninterleaved or
-	progressive JPEG files.  The library checks that the scan array
-	defines a valid JPEG scan sequence.  (jpeg_simple_progression creates
-	a suitable scan definition array for progressive JPEG.)  This is
-	discussed further under "Progressive JPEG support".
-
-int smoothing_factor
-	If non-zero, the input image is smoothed; the value should be 1 for
-	minimal smoothing to 100 for maximum smoothing.  Consult jcsample.c
-	for details of the smoothing algorithm.  The default is zero.
-
-boolean write_JFIF_header
-	If TRUE, a JFIF APP0 marker is emitted.  jpeg_set_defaults() and
-	jpeg_set_colorspace() set this TRUE if a JFIF-legal JPEG color space
-	(ie, YCbCr or grayscale) is selected, otherwise FALSE.
-
-UINT8 JFIF_major_version
-UINT8 JFIF_minor_version
-	The version number to be written into the JFIF marker.
-	jpeg_set_defaults() initializes the version to 1.01 (major=minor=1).
-	You should set it to 1.02 (major=1, minor=2) if you plan to write
-	any JFIF 1.02 extension markers.
-
-UINT8 density_unit
-UINT16 X_density
-UINT16 Y_density
-	The resolution information to be written into the JFIF marker;
-	not used otherwise.  density_unit may be 0 for unknown,
-	1 for dots/inch, or 2 for dots/cm.  The default values are 0,1,1
-	indicating square pixels of unknown size.
-
-boolean write_Adobe_marker
-	If TRUE, an Adobe APP14 marker is emitted.  jpeg_set_defaults() and
-	jpeg_set_colorspace() set this TRUE if JPEG color space RGB, CMYK,
-	or YCCK is selected, otherwise FALSE.  It is generally a bad idea
-	to set both write_JFIF_header and write_Adobe_marker.  In fact,
-	you probably shouldn't change the default settings at all --- the
-	default behavior ensures that the JPEG file's color space can be
-	recognized by the decoder.
-
-JQUANT_TBL * quant_tbl_ptrs[NUM_QUANT_TBLS]
-	Pointers to coefficient quantization tables, one per table slot,
-	or NULL if no table is defined for a slot.  Usually these should
-	be set via one of the above helper routines; jpeg_add_quant_table()
-	is general enough to define any quantization table.  The other
-	routines will set up table slot 0 for luminance quality and table
-	slot 1 for chrominance.
-
-JHUFF_TBL * dc_huff_tbl_ptrs[NUM_HUFF_TBLS]
-JHUFF_TBL * ac_huff_tbl_ptrs[NUM_HUFF_TBLS]
-	Pointers to Huffman coding tables, one per table slot, or NULL if
-	no table is defined for a slot.  Slots 0 and 1 are filled with the
-	JPEG sample tables by jpeg_set_defaults().  If you need to allocate
-	more table structures, jpeg_alloc_huff_table() may be used.
-	Note that optimal Huffman tables can be computed for an image
-	by setting optimize_coding, as discussed above; there's seldom
-	any need to mess with providing your own Huffman tables.
-
-There are some additional cinfo fields which are not documented here
-because you currently can't change them; for example, you can't set
-arith_code TRUE because arithmetic coding is unsupported.
-
-
-Per-component parameters are stored in the struct cinfo.comp_info[i] for
-component number i.  Note that components here refer to components of the
-JPEG color space, *not* the source image color space.  A suitably large
-comp_info[] array is allocated by jpeg_set_defaults(); if you choose not
-to use that routine, it's up to you to allocate the array.
-
-int component_id
-	The one-byte identifier code to be recorded in the JPEG file for
-	this component.  For the standard color spaces, we recommend you
-	leave the default values alone.
-
-int h_samp_factor
-int v_samp_factor
-	Horizontal and vertical sampling factors for the component; must
-	be 1..4 according to the JPEG standard.  Note that larger sampling
-	factors indicate a higher-resolution component; many people find
-	this behavior quite unintuitive.  The default values are 2,2 for
-	luminance components and 1,1 for chrominance components, except
-	for grayscale where 1,1 is used.
-
-int quant_tbl_no
-	Quantization table number for component.  The default value is
-	0 for luminance components and 1 for chrominance components.
-
-int dc_tbl_no
-int ac_tbl_no
-	DC and AC entropy coding table numbers.  The default values are
-	0 for luminance components and 1 for chrominance components.
-
-int component_index
-	Must equal the component's index in comp_info[].  (Beginning in
-	release v6, the compressor library will fill this in automatically;
-	you don't have to.)
-
-
-Decompression parameter selection
----------------------------------
-
-Decompression parameter selection is somewhat simpler than compression
-parameter selection, since all of the JPEG internal parameters are
-recorded in the source file and need not be supplied by the application.
-(Unless you are working with abbreviated files, in which case see
-"Abbreviated datastreams", below.)  Decompression parameters control
-the postprocessing done on the image to deliver it in a format suitable
-for the application's use.  Many of the parameters control speed/quality
-tradeoffs, in which faster decompression may be obtained at the price of
-a poorer-quality image.  The defaults select the highest quality (slowest)
-processing.
-
-The following fields in the JPEG object are set by jpeg_read_header() and
-may be useful to the application in choosing decompression parameters:
-
-JDIMENSION image_width			Width and height of image
-JDIMENSION image_height
-int num_components			Number of color components
-J_COLOR_SPACE jpeg_color_space		Colorspace of image
-boolean saw_JFIF_marker			TRUE if a JFIF APP0 marker was seen
-  UINT8 JFIF_major_version		Version information from JFIF marker
-  UINT8 JFIF_minor_version
-  UINT8 density_unit			Resolution data from JFIF marker
-  UINT16 X_density
-  UINT16 Y_density
-boolean saw_Adobe_marker		TRUE if an Adobe APP14 marker was seen
-  UINT8 Adobe_transform			Color transform code from Adobe marker
-
-The JPEG color space, unfortunately, is something of a guess since the JPEG
-standard proper does not provide a way to record it.  In practice most files
-adhere to the JFIF or Adobe conventions, and the decoder will recognize these
-correctly.  See "Special color spaces", below, for more info.
-
-
-The decompression parameters that determine the basic properties of the
-returned image are:
-
-J_COLOR_SPACE out_color_space
-	Output color space.  jpeg_read_header() sets an appropriate default
-	based on jpeg_color_space; typically it will be RGB or grayscale.
-	The application can change this field to request output in a different
-	colorspace.  For example, set it to JCS_GRAYSCALE to get grayscale
-	output from a color file.  (This is useful for previewing: grayscale
-	output is faster than full color since the color components need not
-	be processed.)  Note that not all possible color space transforms are
-	currently implemented; you may need to extend jdcolor.c if you want an
-	unusual conversion.
-
-unsigned int scale_num, scale_denom
-	Scale the image by the fraction scale_num/scale_denom.  Default is
-	1/1, or no scaling.  Currently, the only supported scaling ratios
-	are 1/1, 1/2, 1/4, and 1/8.  (The library design allows for arbitrary
-	scaling ratios but this is not likely to be implemented any time soon.)
-	Smaller scaling ratios permit significantly faster decoding since
-	fewer pixels need be processed and a simpler IDCT method can be used.
-
-boolean quantize_colors
-	If set TRUE, colormapped output will be delivered.  Default is FALSE,
-	meaning that full-color output will be delivered.
-
-The next three parameters are relevant only if quantize_colors is TRUE.
-
-int desired_number_of_colors
-	Maximum number of colors to use in generating a library-supplied color
-	map (the actual number of colors is returned in a different field).
-	Default 256.  Ignored when the application supplies its own color map.
-
-boolean two_pass_quantize
-	If TRUE, an extra pass over the image is made to select a custom color
-	map for the image.  This usually looks a lot better than the one-size-
-	fits-all colormap that is used otherwise.  Default is TRUE.  Ignored
-	when the application supplies its own color map.
-
-J_DITHER_MODE dither_mode
-	Selects color dithering method.  Supported values are:
-		JDITHER_NONE	no dithering: fast, very low quality
-		JDITHER_ORDERED	ordered dither: moderate speed and quality
-		JDITHER_FS	Floyd-Steinberg dither: slow, high quality
-	Default is JDITHER_FS.  (At present, ordered dither is implemented
-	only in the single-pass, standard-colormap case.  If you ask for
-	ordered dither when two_pass_quantize is TRUE or when you supply
-	an external color map, you'll get F-S dithering.)
-
-When quantize_colors is TRUE, the target color map is described by the next
-two fields.  colormap is set to NULL by jpeg_read_header().  The application
-can supply a color map by setting colormap non-NULL and setting
-actual_number_of_colors to the map size.  Otherwise, jpeg_start_decompress()
-selects a suitable color map and sets these two fields itself.
-[Implementation restriction: at present, an externally supplied colormap is
-only accepted for 3-component output color spaces.]
-
-JSAMPARRAY colormap
-	The color map, represented as a 2-D pixel array of out_color_components
-	rows and actual_number_of_colors columns.  Ignored if not quantizing.
-	CAUTION: if the JPEG library creates its own colormap, the storage
-	pointed to by this field is released by jpeg_finish_decompress().
-	Copy the colormap somewhere else first, if you want to save it.
-
-int actual_number_of_colors
-	The number of colors in the color map.
-
-Additional decompression parameters that the application may set include:
-
-J_DCT_METHOD dct_method
-	Selects the algorithm used for the DCT step.  Choices are the same
-	as described above for compression.
-
-boolean do_fancy_upsampling
-	If TRUE, do careful upsampling of chroma components.  If FALSE,
-	a faster but sloppier method is used.  Default is TRUE.  The visual
-	impact of the sloppier method is often very small.
-
-boolean do_block_smoothing
-	If TRUE, interblock smoothing is applied in early stages of decoding
-	progressive JPEG files; if FALSE, not.  Default is TRUE.  Early
-	progression stages look "fuzzy" with smoothing, "blocky" without.
-	In any case, block smoothing ceases to be applied after the first few
-	AC coefficients are known to full accuracy, so it is relevant only
-	when using buffered-image mode for progressive images.
-
-boolean enable_1pass_quant
-boolean enable_external_quant
-boolean enable_2pass_quant
-	These are significant only in buffered-image mode, which is
-	described in its own section below.
-
-
-The output image dimensions are given by the following fields.  These are
-computed from the source image dimensions and the decompression parameters
-by jpeg_start_decompress().  You can also call jpeg_calc_output_dimensions()
-to obtain the values that will result from the current parameter settings.
-This can be useful if you are trying to pick a scaling ratio that will get
-close to a desired target size.  It's also important if you are using the
-JPEG library's memory manager to allocate output buffer space, because you
-are supposed to request such buffers *before* jpeg_start_decompress().
-
-JDIMENSION output_width		Actual dimensions of output image.
-JDIMENSION output_height
-int out_color_components	Number of color components in out_color_space.
-int output_components		Number of color components returned.
-int rec_outbuf_height		Recommended height of scanline buffer.
-
-When quantizing colors, output_components is 1, indicating a single color map
-index per pixel.  Otherwise it equals out_color_components.  The output arrays
-are required to be output_width * output_components JSAMPLEs wide.
-
-rec_outbuf_height is the recommended minimum height (in scanlines) of the
-buffer passed to jpeg_read_scanlines().  If the buffer is smaller, the
-library will still work, but time will be wasted due to unnecessary data
-copying.  In high-quality modes, rec_outbuf_height is always 1, but some
-faster, lower-quality modes set it to larger values (typically 2 to 4).
-If you are going to ask for a high-speed processing mode, you may as well
-go to the trouble of honoring rec_outbuf_height so as to avoid data copying.
-(An output buffer larger than rec_outbuf_height lines is OK, but won't
-provide any material speed improvement over that height.)
-
-
-Special color spaces
---------------------
-
-The JPEG standard itself is "color blind" and doesn't specify any particular
-color space.  It is customary to convert color data to a luminance/chrominance
-color space before compressing, since this permits greater compression.  The
-existing de-facto JPEG file format standards specify YCbCr or grayscale data
-(JFIF), or grayscale, RGB, YCbCr, CMYK, or YCCK (Adobe).  For special
-applications such as multispectral images, other color spaces can be used,
-but it must be understood that such files will be unportable.
-
-The JPEG library can handle the most common colorspace conversions (namely
-RGB <=> YCbCr and CMYK <=> YCCK).  It can also deal with data of an unknown
-color space, passing it through without conversion.  If you deal extensively
-with an unusual color space, you can easily extend the library to understand
-additional color spaces and perform appropriate conversions.
-
-For compression, the source data's color space is specified by field
-in_color_space.  This is transformed to the JPEG file's color space given
-by jpeg_color_space.  jpeg_set_defaults() chooses a reasonable JPEG color
-space depending on in_color_space, but you can override this by calling
-jpeg_set_colorspace().  Of course you must select a supported transformation.
-jccolor.c currently supports the following transformations:
-	RGB => YCbCr
-	RGB => GRAYSCALE
-	YCbCr => GRAYSCALE
-	CMYK => YCCK
-plus the null transforms: GRAYSCALE => GRAYSCALE, RGB => RGB,
-YCbCr => YCbCr, CMYK => CMYK, YCCK => YCCK, and UNKNOWN => UNKNOWN.
-
-The de-facto file format standards (JFIF and Adobe) specify APPn markers that
-indicate the color space of the JPEG file.  It is important to ensure that
-these are written correctly, or omitted if the JPEG file's color space is not
-one of the ones supported by the de-facto standards.  jpeg_set_colorspace()
-will set the compression parameters to include or omit the APPn markers
-properly, so long as it is told the truth about the JPEG color space.
-For example, if you are writing some random 3-component color space without
-conversion, don't try to fake out the library by setting in_color_space and
-jpeg_color_space to JCS_YCbCr; use JCS_UNKNOWN.  You may want to write an
-APPn marker of your own devising to identify the colorspace --- see "Special
-markers", below.
-
-When told that the color space is UNKNOWN, the library will default to using
-luminance-quality compression parameters for all color components.  You may
-well want to change these parameters.  See the source code for
-jpeg_set_colorspace(), in jcparam.c, for details.
-
-For decompression, the JPEG file's color space is given in jpeg_color_space,
-and this is transformed to the output color space out_color_space.
-jpeg_read_header's setting of jpeg_color_space can be relied on if the file
-conforms to JFIF or Adobe conventions, but otherwise it is no better than a
-guess.  If you know the JPEG file's color space for certain, you can override
-jpeg_read_header's guess by setting jpeg_color_space.  jpeg_read_header also
-selects a default output color space based on (its guess of) jpeg_color_space;
-set out_color_space to override this.  Again, you must select a supported
-transformation.  jdcolor.c currently supports
-	YCbCr => GRAYSCALE
-	YCbCr => RGB
-	GRAYSCALE => RGB
-	YCCK => CMYK
-as well as the null transforms.  (Since GRAYSCALE=>RGB is provided, an
-application can force grayscale JPEGs to look like color JPEGs if it only
-wants to handle one case.)
-
-The two-pass color quantizer, jquant2.c, is specialized to handle RGB data
-(it weights distances appropriately for RGB colors).  You'll need to modify
-the code if you want to use it for non-RGB output color spaces.  Note that
-jquant2.c is used to map to an application-supplied colormap as well as for
-the normal two-pass colormap selection process.
-
-CAUTION: it appears that Adobe Photoshop writes inverted data in CMYK JPEG
-files: 0 represents 100% ink coverage, rather than 0% ink as you'd expect.
-This is arguably a bug in Photoshop, but if you need to work with Photoshop
-CMYK files, you will have to deal with it in your application.  We cannot
-"fix" this in the library by inverting the data during the CMYK<=>YCCK
-transform, because that would break other applications, notably Ghostscript.
-Photoshop versions prior to 3.0 write EPS files containing JPEG-encoded CMYK
-data in the same inverted-YCCK representation used in bare JPEG files, but
-the surrounding PostScript code performs an inversion using the PS image
-operator.  I am told that Photoshop 3.0 will write uninverted YCCK in
-EPS/JPEG files, and will omit the PS-level inversion.  (But the data
-polarity used in bare JPEG files will not change in 3.0.)  In either case,
-the JPEG library must not invert the data itself, or else Ghostscript would
-read these EPS files incorrectly.
-
-
-Error handling
---------------
-
-When the default error handler is used, any error detected inside the JPEG
-routines will cause a message to be printed on stderr, followed by exit().
-You can supply your own error handling routines to override this behavior
-and to control the treatment of nonfatal warnings and trace/debug messages.
-The file example.c illustrates the most common case, which is to have the
-application regain control after an error rather than exiting.
-
-The JPEG library never writes any message directly; it always goes through
-the error handling routines.  Three classes of messages are recognized:
-  * Fatal errors: the library cannot continue.
-  * Warnings: the library can continue, but the data is corrupt, and a
-    damaged output image is likely to result.
-  * Trace/informational messages.  These come with a trace level indicating
-    the importance of the message; you can control the verbosity of the
-    program by adjusting the maximum trace level that will be displayed.
-
-You may, if you wish, simply replace the entire JPEG error handling module
-(jerror.c) with your own code.  However, you can avoid code duplication by
-only replacing some of the routines depending on the behavior you need.
-This is accomplished by calling jpeg_std_error() as usual, but then overriding
-some of the method pointers in the jpeg_error_mgr struct, as illustrated by
-example.c.
-
-All of the error handling routines will receive a pointer to the JPEG object
-(a j_common_ptr which points to either a jpeg_compress_struct or a
-jpeg_decompress_struct; if you need to tell which, test the is_decompressor
-field).  This struct includes a pointer to the error manager struct in its
-"err" field.  Frequently, custom error handler routines will need to access
-additional data which is not known to the JPEG library or the standard error
-handler.  The most convenient way to do this is to embed either the JPEG
-object or the jpeg_error_mgr struct in a larger structure that contains
-additional fields; then casting the passed pointer provides access to the
-additional fields.  Again, see example.c for one way to do it.  (Beginning
-with IJG version 6b, there is also a void pointer "client_data" in each
-JPEG object, which the application can also use to find related data.
-The library does not touch client_data at all.)
-
-The individual methods that you might wish to override are:
-
-error_exit (j_common_ptr cinfo)
-	Receives control for a fatal error.  Information sufficient to
-	generate the error message has been stored in cinfo->err; call
-	output_message to display it.  Control must NOT return to the caller;
-	generally this routine will exit() or longjmp() somewhere.
-	Typically you would override this routine to get rid of the exit()
-	default behavior.  Note that if you continue processing, you should
-	clean up the JPEG object with jpeg_abort() or jpeg_destroy().
-
-output_message (j_common_ptr cinfo)
-	Actual output of any JPEG message.  Override this to send messages
-	somewhere other than stderr.  Note that this method does not know
-	how to generate a message, only where to send it.
-
-format_message (j_common_ptr cinfo, char * buffer)
-	Constructs a readable error message string based on the error info
-	stored in cinfo->err.  This method is called by output_message.  Few
-	applications should need to override this method.  One possible
-	reason for doing so is to implement dynamic switching of error message
-	language.
-
-emit_message (j_common_ptr cinfo, int msg_level)
-	Decide whether or not to emit a warning or trace message; if so,
-	calls output_message.  The main reason for overriding this method
-	would be to abort on warnings.  msg_level is -1 for warnings,
-	0 and up for trace messages.
-
-Only error_exit() and emit_message() are called from the rest of the JPEG
-library; the other two are internal to the error handler.
-
-The actual message texts are stored in an array of strings which is pointed to
-by the field err->jpeg_message_table.  The messages are numbered from 0 to
-err->last_jpeg_message, and it is these code numbers that are used in the
-JPEG library code.  You could replace the message texts (for instance, with
-messages in French or German) by changing the message table pointer.  See
-jerror.h for the default texts.  CAUTION: this table will almost certainly
-change or grow from one library version to the next.
-
-It may be useful for an application to add its own message texts that are
-handled by the same mechanism.  The error handler supports a second "add-on"
-message table for this purpose.  To define an addon table, set the pointer
-err->addon_message_table and the message numbers err->first_addon_message and
-err->last_addon_message.  If you number the addon messages beginning at 1000
-or so, you won't have to worry about conflicts with the library's built-in
-messages.  See the sample applications cjpeg/djpeg for an example of using
-addon messages (the addon messages are defined in cderror.h).
-
-Actual invocation of the error handler is done via macros defined in jerror.h:
-	ERREXITn(...)	for fatal errors
-	WARNMSn(...)	for corrupt-data warnings
-	TRACEMSn(...)	for trace and informational messages.
-These macros store the message code and any additional parameters into the
-error handler struct, then invoke the error_exit() or emit_message() method.
-The variants of each macro are for varying numbers of additional parameters.
-The additional parameters are inserted into the generated message using
-standard printf() format codes.
-
-See jerror.h and jerror.c for further details.
-
-
-Compressed data handling (source and destination managers)
-----------------------------------------------------------
-
-The JPEG compression library sends its compressed data to a "destination
-manager" module.  The default destination manager just writes the data to a
-stdio stream, but you can provide your own manager to do something else.
-Similarly, the decompression library calls a "source manager" to obtain the
-compressed data; you can provide your own source manager if you want the data
-to come from somewhere other than a stdio stream.
-
-In both cases, compressed data is processed a bufferload at a time: the
-destination or source manager provides a work buffer, and the library invokes
-the manager only when the buffer is filled or emptied.  (You could define a
-one-character buffer to force the manager to be invoked for each byte, but
-that would be rather inefficient.)  The buffer's size and location are
-controlled by the manager, not by the library.  For example, if you desired to
-decompress a JPEG datastream that was all in memory, you could just make the
-buffer pointer and length point to the original data in memory.  Then the
-buffer-reload procedure would be invoked only if the decompressor ran off the
-end of the datastream, which would indicate an erroneous datastream.
-
-The work buffer is defined as an array of datatype JOCTET, which is generally
-"char" or "unsigned char".  On a machine where char is not exactly 8 bits
-wide, you must define JOCTET as a wider data type and then modify the data
-source and destination modules to transcribe the work arrays into 8-bit units
-on external storage.
-
-A data destination manager struct contains a pointer and count defining the
-next byte to write in the work buffer and the remaining free space:
-
-	JOCTET * next_output_byte;  /* => next byte to write in buffer */
-	size_t free_in_buffer;      /* # of byte spaces remaining in buffer */
-
-The library increments the pointer and decrements the count until the buffer
-is filled.  The manager's empty_output_buffer method must reset the pointer
-and count.  The manager is expected to remember the buffer's starting address
-and total size in private fields not visible to the library.
-
-A data destination manager provides three methods:
-
-init_destination (j_compress_ptr cinfo)
-	Initialize destination.  This is called by jpeg_start_compress()
-	before any data is actually written.  It must initialize
-	next_output_byte and free_in_buffer.  free_in_buffer must be
-	initialized to a positive value.
-
-empty_output_buffer (j_compress_ptr cinfo)
-	This is called whenever the buffer has filled (free_in_buffer
-	reaches zero).  In typical applications, it should write out the
-	*entire* buffer (use the saved start address and buffer length;
-	ignore the current state of next_output_byte and free_in_buffer).
-	Then reset the pointer & count to the start of the buffer, and
-	return TRUE indicating that the buffer has been dumped.
-	free_in_buffer must be set to a positive value when TRUE is
-	returned.  A FALSE return should only be used when I/O suspension is
-	desired (this operating mode is discussed in the next section).
-
-term_destination (j_compress_ptr cinfo)
-	Terminate destination --- called by jpeg_finish_compress() after all
-	data has been written.  In most applications, this must flush any
-	data remaining in the buffer.  Use either next_output_byte or
-	free_in_buffer to determine how much data is in the buffer.
-
-term_destination() is NOT called by jpeg_abort() or jpeg_destroy().  If you
-want the destination manager to be cleaned up during an abort, you must do it
-yourself.
-
-You will also need code to create a jpeg_destination_mgr struct, fill in its
-method pointers, and insert a pointer to the struct into the "dest" field of
-the JPEG compression object.  This can be done in-line in your setup code if
-you like, but it's probably cleaner to provide a separate routine similar to
-the jpeg_stdio_dest() routine of the supplied destination manager.
-
-Decompression source managers follow a parallel design, but with some
-additional frammishes.  The source manager struct contains a pointer and count
-defining the next byte to read from the work buffer and the number of bytes
-remaining:
-
-	const JOCTET * next_input_byte; /* => next byte to read from buffer */
-	size_t bytes_in_buffer;         /* # of bytes remaining in buffer */
-
-The library increments the pointer and decrements the count until the buffer
-is emptied.  The manager's fill_input_buffer method must reset the pointer and
-count.  In most applications, the manager must remember the buffer's starting
-address and total size in private fields not visible to the library.
-
-A data source manager provides five methods:
-
-init_source (j_decompress_ptr cinfo)
-	Initialize source.  This is called by jpeg_read_header() before any
-	data is actually read.  Unlike init_destination(), it may leave
-	bytes_in_buffer set to 0 (in which case a fill_input_buffer() call
-	will occur immediately).
-
-fill_input_buffer (j_decompress_ptr cinfo)
-	This is called whenever bytes_in_buffer has reached zero and more
-	data is wanted.  In typical applications, it should read fresh data
-	into the buffer (ignoring the current state of next_input_byte and
-	bytes_in_buffer), reset the pointer & count to the start of the
-	buffer, and return TRUE indicating that the buffer has been reloaded.
-	It is not necessary to fill the buffer entirely, only to obtain at
-	least one more byte.  bytes_in_buffer MUST be set to a positive value
-	if TRUE is returned.  A FALSE return should only be used when I/O
-	suspension is desired (this mode is discussed in the next section).
-
-skip_input_data (j_decompress_ptr cinfo, long num_bytes)
-	Skip num_bytes worth of data.  The buffer pointer and count should
-	be advanced over num_bytes input bytes, refilling the buffer as
-	needed.  This is used to skip over a potentially large amount of
-	uninteresting data (such as an APPn marker).  In some applications
-	it may be possible to optimize away the reading of the skipped data,
-	but it's not clear that being smart is worth much trouble; large
-	skips are uncommon.  bytes_in_buffer may be zero on return.
-	A zero or negative skip count should be treated as a no-op.
-
-resync_to_restart (j_decompress_ptr cinfo, int desired)
-	This routine is called only when the decompressor has failed to find
-	a restart (RSTn) marker where one is expected.  Its mission is to
-	find a suitable point for resuming decompression.  For most
-	applications, we recommend that you just use the default resync
-	procedure, jpeg_resync_to_restart().  However, if you are able to back
-	up in the input data stream, or if you have a-priori knowledge about
-	the likely location of restart markers, you may be able to do better.
-	Read the read_restart_marker() and jpeg_resync_to_restart() routines
-	in jdmarker.c if you think you'd like to implement your own resync
-	procedure.
-
-term_source (j_decompress_ptr cinfo)
-	Terminate source --- called by jpeg_finish_decompress() after all
-	data has been read.  Often a no-op.
-
-For both fill_input_buffer() and skip_input_data(), there is no such thing
-as an EOF return.  If the end of the file has been reached, the routine has
-a choice of exiting via ERREXIT() or inserting fake data into the buffer.
-In most cases, generating a warning message and inserting a fake EOI marker
-is the best course of action --- this will allow the decompressor to output
-however much of the image is there.  In pathological cases, the decompressor
-may swallow the EOI and again demand data ... just keep feeding it fake EOIs.
-jdatasrc.c illustrates the recommended error recovery behavior.
-
-term_source() is NOT called by jpeg_abort() or jpeg_destroy().  If you want
-the source manager to be cleaned up during an abort, you must do it yourself.
-
-You will also need code to create a jpeg_source_mgr struct, fill in its method
-pointers, and insert a pointer to the struct into the "src" field of the JPEG
-decompression object.  This can be done in-line in your setup code if you
-like, but it's probably cleaner to provide a separate routine similar to the
-jpeg_stdio_src() routine of the supplied source manager.
-
-For more information, consult the stdio source and destination managers
-in jdatasrc.c and jdatadst.c.
-
-
-I/O suspension
---------------
-
-Some applications need to use the JPEG library as an incremental memory-to-
-memory filter: when the compressed data buffer is filled or emptied, they want
-control to return to the outer loop, rather than expecting that the buffer can
-be emptied or reloaded within the data source/destination manager subroutine.
-The library supports this need by providing an "I/O suspension" mode, which we
-describe in this section.
-
-The I/O suspension mode is not a panacea: nothing is guaranteed about the
-maximum amount of time spent in any one call to the library, so it will not
-eliminate response-time problems in single-threaded applications.  If you
-need guaranteed response time, we suggest you "bite the bullet" and implement
-a real multi-tasking capability.
-
-To use I/O suspension, cooperation is needed between the calling application
-and the data source or destination manager; you will always need a custom
-source/destination manager.  (Please read the previous section if you haven't
-already.)  The basic idea is that the empty_output_buffer() or
-fill_input_buffer() routine is a no-op, merely returning FALSE to indicate
-that it has done nothing.  Upon seeing this, the JPEG library suspends
-operation and returns to its caller.  The surrounding application is
-responsible for emptying or refilling the work buffer before calling the
-JPEG library again.
-
-Compression suspension:
-
-For compression suspension, use an empty_output_buffer() routine that returns
-FALSE; typically it will not do anything else.  This will cause the
-compressor to return to the caller of jpeg_write_scanlines(), with the return
-value indicating that not all the supplied scanlines have been accepted.
-The application must make more room in the output buffer, adjust the output
-buffer pointer/count appropriately, and then call jpeg_write_scanlines()
-again, pointing to the first unconsumed scanline.
-
-When forced to suspend, the compressor will backtrack to a convenient stopping
-point (usually the start of the current MCU); it will regenerate some output
-data when restarted.  Therefore, although empty_output_buffer() is only
-called when the buffer is filled, you should NOT write out the entire buffer
-after a suspension.  Write only the data up to the current position of
-next_output_byte/free_in_buffer.  The data beyond that point will be
-regenerated after resumption.
-
-Because of the backtracking behavior, a good-size output buffer is essential
-for efficiency; you don't want the compressor to suspend often.  (In fact, an
-overly small buffer could lead to infinite looping, if a single MCU required
-more data than would fit in the buffer.)  We recommend a buffer of at least
-several Kbytes.  You may want to insert explicit code to ensure that you don't
-call jpeg_write_scanlines() unless there is a reasonable amount of space in
-the output buffer; in other words, flush the buffer before trying to compress
-more data.
-
-The compressor does not allow suspension while it is trying to write JPEG
-markers at the beginning and end of the file.  This means that:
-  * At the beginning of a compression operation, there must be enough free
-    space in the output buffer to hold the header markers (typically 600 or
-    so bytes).  The recommended buffer size is bigger than this anyway, so
-    this is not a problem as long as you start with an empty buffer.  However,
-    this restriction might catch you if you insert large special markers, such
-    as a JFIF thumbnail image, without flushing the buffer afterwards.
-  * When you call jpeg_finish_compress(), there must be enough space in the
-    output buffer to emit any buffered data and the final EOI marker.  In the
-    current implementation, half a dozen bytes should suffice for this, but
-    for safety's sake we recommend ensuring that at least 100 bytes are free
-    before calling jpeg_finish_compress().
-
-A more significant restriction is that jpeg_finish_compress() cannot suspend.
-This means you cannot use suspension with multi-pass operating modes, namely
-Huffman code optimization and multiple-scan output.  Those modes write the
-whole file during jpeg_finish_compress(), which will certainly result in
-buffer overrun.  (Note that this restriction applies only to compression,
-not decompression.  The decompressor supports input suspension in all of its
-operating modes.)
-
-Decompression suspension:
-
-For decompression suspension, use a fill_input_buffer() routine that simply
-returns FALSE (except perhaps during error recovery, as discussed below).
-This will cause the decompressor to return to its caller with an indication
-that suspension has occurred.  This can happen at four places:
-  * jpeg_read_header(): will return JPEG_SUSPENDED.
-  * jpeg_start_decompress(): will return FALSE, rather than its usual TRUE.
-  * jpeg_read_scanlines(): will return the number of scanlines already
-	completed (possibly 0).
-  * jpeg_finish_decompress(): will return FALSE, rather than its usual TRUE.
-The surrounding application must recognize these cases, load more data into
-the input buffer, and repeat the call.  In the case of jpeg_read_scanlines(),
-increment the passed pointers past any scanlines successfully read.
-
-Just as with compression, the decompressor will typically backtrack to a
-convenient restart point before suspending.  When fill_input_buffer() is
-called, next_input_byte/bytes_in_buffer point to the current restart point,
-which is where the decompressor will backtrack to if FALSE is returned.
-The data beyond that position must NOT be discarded if you suspend; it needs
-to be re-read upon resumption.  In most implementations, you'll need to shift
-this data down to the start of your work buffer and then load more data after
-it.  Again, this behavior means that a several-Kbyte work buffer is essential
-for decent performance; furthermore, you should load a reasonable amount of
-new data before resuming decompression.  (If you loaded, say, only one new
-byte each time around, you could waste a LOT of cycles.)
-
-The skip_input_data() source manager routine requires special care in a
-suspension scenario.  This routine is NOT granted the ability to suspend the
-decompressor; it can decrement bytes_in_buffer to zero, but no more.  If the
-requested skip distance exceeds the amount of data currently in the input
-buffer, then skip_input_data() must set bytes_in_buffer to zero and record the
-additional skip distance somewhere else.  The decompressor will immediately
-call fill_input_buffer(), which should return FALSE, which will cause a
-suspension return.  The surrounding application must then arrange to discard
-the recorded number of bytes before it resumes loading the input buffer.
-(Yes, this design is rather baroque, but it avoids complexity in the far more
-common case where a non-suspending source manager is used.)
-
-If the input data has been exhausted, we recommend that you emit a warning
-and insert dummy EOI markers just as a non-suspending data source manager
-would do.  This can be handled either in the surrounding application logic or
-within fill_input_buffer(); the latter is probably more efficient.  If
-fill_input_buffer() knows that no more data is available, it can set the
-pointer/count to point to a dummy EOI marker and then return TRUE just as
-though it had read more data in a non-suspending situation.
-
-The decompressor does not attempt to suspend within standard JPEG markers;
-instead it will backtrack to the start of the marker and reprocess the whole
-marker next time.  Hence the input buffer must be large enough to hold the
-longest standard marker in the file.  Standard JPEG markers should normally
-not exceed a few hundred bytes each (DHT tables are typically the longest).
-We recommend at least a 2K buffer for performance reasons, which is much
-larger than any correct marker is likely to be.  For robustness against
-damaged marker length counts, you may wish to insert a test in your
-application for the case that the input buffer is completely full and yet
-the decoder has suspended without consuming any data --- otherwise, if this
-situation did occur, it would lead to an endless loop.  (The library can't
-provide this test since it has no idea whether "the buffer is full", or
-even whether there is a fixed-size input buffer.)
-
-The input buffer would need to be 64K to allow for arbitrary COM or APPn
-markers, but these are handled specially: they are either saved into allocated
-memory, or skipped over by calling skip_input_data().  In the former case,
-suspension is handled correctly, and in the latter case, the problem of
-buffer overrun is placed on skip_input_data's shoulders, as explained above.
-Note that if you provide your own marker handling routine for large markers,
-you should consider how to deal with buffer overflow.
-
-Multiple-buffer management:
-
-In some applications it is desirable to store the compressed data in a linked
-list of buffer areas, so as to avoid data copying.  This can be handled by
-having empty_output_buffer() or fill_input_buffer() set the pointer and count
-to reference the next available buffer; FALSE is returned only if no more
-buffers are available.  Although seemingly straightforward, there is a
-pitfall in this approach: the backtrack that occurs when FALSE is returned
-could back up into an earlier buffer.  For example, when fill_input_buffer()
-is called, the current pointer & count indicate the backtrack restart point.
-Since fill_input_buffer() will set the pointer and count to refer to a new
-buffer, the restart position must be saved somewhere else.  Suppose a second
-call to fill_input_buffer() occurs in the same library call, and no
-additional input data is available, so fill_input_buffer must return FALSE.
-If the JPEG library has not moved the pointer/count forward in the current
-buffer, then *the correct restart point is the saved position in the prior
-buffer*.  Prior buffers may be discarded only after the library establishes
-a restart point within a later buffer.  Similar remarks apply for output into
-a chain of buffers.
-
-The library will never attempt to backtrack over a skip_input_data() call,
-so any skipped data can be permanently discarded.  You still have to deal
-with the case of skipping not-yet-received data, however.
-
-It's much simpler to use only a single buffer; when fill_input_buffer() is
-called, move any unconsumed data (beyond the current pointer/count) down to
-the beginning of this buffer and then load new data into the remaining buffer
-space.  This approach requires a little more data copying but is far easier
-to get right.
-
-
-Progressive JPEG support
-------------------------
-
-Progressive JPEG rearranges the stored data into a series of scans of
-increasing quality.  In situations where a JPEG file is transmitted across a
-slow communications link, a decoder can generate a low-quality image very
-quickly from the first scan, then gradually improve the displayed quality as
-more scans are received.  The final image after all scans are complete is
-identical to that of a regular (sequential) JPEG file of the same quality
-setting.  Progressive JPEG files are often slightly smaller than equivalent
-sequential JPEG files, but the possibility of incremental display is the main
-reason for using progressive JPEG.
-
-The IJG encoder library generates progressive JPEG files when given a
-suitable "scan script" defining how to divide the data into scans.
-Creation of progressive JPEG files is otherwise transparent to the encoder.
-Progressive JPEG files can also be read transparently by the decoder library.
-If the decoding application simply uses the library as defined above, it
-will receive a final decoded image without any indication that the file was
-progressive.  Of course, this approach does not allow incremental display.
-To perform incremental display, an application needs to use the decoder
-library's "buffered-image" mode, in which it receives a decoded image
-multiple times.
-
-Each displayed scan requires about as much work to decode as a full JPEG
-image of the same size, so the decoder must be fairly fast in relation to the
-data transmission rate in order to make incremental display useful.  However,
-it is possible to skip displaying the image and simply add the incoming bits
-to the decoder's coefficient buffer.  This is fast because only Huffman
-decoding need be done, not IDCT, upsampling, colorspace conversion, etc.
-The IJG decoder library allows the application to switch dynamically between
-displaying the image and simply absorbing the incoming bits.  A properly
-coded application can automatically adapt the number of display passes to
-suit the time available as the image is received.  Also, a final
-higher-quality display cycle can be performed from the buffered data after
-the end of the file is reached.
-
-Progressive compression:
-
-To create a progressive JPEG file (or a multiple-scan sequential JPEG file),
-set the scan_info cinfo field to point to an array of scan descriptors, and
-perform compression as usual.  Instead of constructing your own scan list,
-you can call the jpeg_simple_progression() helper routine to create a
-recommended progression sequence; this method should be used by all
-applications that don't want to get involved in the nitty-gritty of
-progressive scan sequence design.  (If you want to provide user control of
-scan sequences, you may wish to borrow the scan script reading code found
-in rdswitch.c, so that you can read scan script files just like cjpeg's.)
-When scan_info is not NULL, the compression library will store DCT'd data
-into a buffer array as jpeg_write_scanlines() is called, and will emit all
-the requested scans during jpeg_finish_compress().  This implies that
-multiple-scan output cannot be created with a suspending data destination
-manager, since jpeg_finish_compress() does not support suspension.  We
-should also note that the compressor currently forces Huffman optimization
-mode when creating a progressive JPEG file, because the default Huffman
-tables are unsuitable for progressive files.
-
-Progressive decompression:
-
-When buffered-image mode is not used, the decoder library will read all of
-a multi-scan file during jpeg_start_decompress(), so that it can provide a
-final decoded image.  (Here "multi-scan" means either progressive or
-multi-scan sequential.)  This makes multi-scan files transparent to the
-decoding application.  However, existing applications that used suspending
-input with version 5 of the IJG library will need to be modified to check
-for a suspension return from jpeg_start_decompress().
-
-To perform incremental display, an application must use the library's
-buffered-image mode.  This is described in the next section.
-
-
-Buffered-image mode
--------------------
-
-In buffered-image mode, the library stores the partially decoded image in a
-coefficient buffer, from which it can be read out as many times as desired.
-This mode is typically used for incremental display of progressive JPEG files,
-but it can be used with any JPEG file.  Each scan of a progressive JPEG file
-adds more data (more detail) to the buffered image.  The application can
-display in lockstep with the source file (one display pass per input scan),
-or it can allow input processing to outrun display processing.  By making
-input and display processing run independently, it is possible for the
-application to adapt progressive display to a wide range of data transmission
-rates.
-
-The basic control flow for buffered-image decoding is
-
-	jpeg_create_decompress()
-	set data source
-	jpeg_read_header()
-	set overall decompression parameters
-	cinfo.buffered_image = TRUE;	/* select buffered-image mode */
-	jpeg_start_decompress()
-	for (each output pass) {
-	    adjust output decompression parameters if required
-	    jpeg_start_output()		/* start a new output pass */
-	    for (all scanlines in image) {
-	        jpeg_read_scanlines()
-	        display scanlines
-	    }
-	    jpeg_finish_output()	/* terminate output pass */
-	}
-	jpeg_finish_decompress()
-	jpeg_destroy_decompress()
-
-This differs from ordinary unbuffered decoding in that there is an additional
-level of looping.  The application can choose how many output passes to make
-and how to display each pass.
-
-The simplest approach to displaying progressive images is to do one display
-pass for each scan appearing in the input file.  In this case the outer loop
-condition is typically
-	while (! jpeg_input_complete(&cinfo))
-and the start-output call should read
-	jpeg_start_output(&cinfo, cinfo.input_scan_number);
-The second parameter to jpeg_start_output() indicates which scan of the input
-file is to be displayed; the scans are numbered starting at 1 for this
-purpose.  (You can use a loop counter starting at 1 if you like, but using
-the library's input scan counter is easier.)  The library automatically reads
-data as necessary to complete each requested scan, and jpeg_finish_output()
-advances to the next scan or end-of-image marker (hence input_scan_number
-will be incremented by the time control arrives back at jpeg_start_output()).
-With this technique, data is read from the input file only as needed, and
-input and output processing run in lockstep.
-
-After reading the final scan and reaching the end of the input file, the
-buffered image remains available; it can be read additional times by
-repeating the jpeg_start_output()/jpeg_read_scanlines()/jpeg_finish_output()
-sequence.  For example, a useful technique is to use fast one-pass color
-quantization for display passes made while the image is arriving, followed by
-a final display pass using two-pass quantization for highest quality.  This
-is done by changing the library parameters before the final output pass.
-Changing parameters between passes is discussed in detail below.
-
-In general the last scan of a progressive file cannot be recognized as such
-until after it is read, so a post-input display pass is the best approach if
-you want special processing in the final pass.
-
-When done with the image, be sure to call jpeg_finish_decompress() to release
-the buffered image (or just use jpeg_destroy_decompress()).
-
-If input data arrives faster than it can be displayed, the application can
-cause the library to decode input data in advance of what's needed to produce
-output.  This is done by calling the routine jpeg_consume_input().
-The return value is one of the following:
-	JPEG_REACHED_SOS:    reached an SOS marker (the start of a new scan)
-	JPEG_REACHED_EOI:    reached the EOI marker (end of image)
-	JPEG_ROW_COMPLETED:  completed reading one MCU row of compressed data
-	JPEG_SCAN_COMPLETED: completed reading last MCU row of current scan
-	JPEG_SUSPENDED:      suspended before completing any of the above
-(JPEG_SUSPENDED can occur only if a suspending data source is used.)  This
-routine can be called at any time after initializing the JPEG object.  It
-reads some additional data and returns when one of the indicated significant
-events occurs.  (If called after the EOI marker is reached, it will
-immediately return JPEG_REACHED_EOI without attempting to read more data.)
-
-The library's output processing will automatically call jpeg_consume_input()
-whenever the output processing overtakes the input; thus, simple lockstep
-display requires no direct calls to jpeg_consume_input().  But by adding
-calls to jpeg_consume_input(), you can absorb data in advance of what is
-being displayed.  This has two benefits:
-  * You can limit buildup of unprocessed data in your input buffer.
-  * You can eliminate extra display passes by paying attention to the
-    state of the library's input processing.
-
-The first of these benefits only requires interspersing calls to
-jpeg_consume_input() with your display operations and any other processing
-you may be doing.  To avoid wasting cycles due to backtracking, it's best to
-call jpeg_consume_input() only after a hundred or so new bytes have arrived.
-This is discussed further under "I/O suspension", above.  (Note: the JPEG
-library currently is not thread-safe.  You must not call jpeg_consume_input()
-from one thread of control if a different library routine is working on the
-same JPEG object in another thread.)
-
-When input arrives fast enough that more than one new scan is available
-before you start a new output pass, you may as well skip the output pass
-corresponding to the completed scan.  This occurs for free if you pass
-cinfo.input_scan_number as the target scan number to jpeg_start_output().
-The input_scan_number field is simply the index of the scan currently being
-consumed by the input processor.  You can ensure that this is up-to-date by
-emptying the input buffer just before calling jpeg_start_output(): call
-jpeg_consume_input() repeatedly until it returns JPEG_SUSPENDED or
-JPEG_REACHED_EOI.
-
-The target scan number passed to jpeg_start_output() is saved in the
-cinfo.output_scan_number field.  The library's output processing calls
-jpeg_consume_input() whenever the current input scan number and row within
-that scan is less than or equal to the current output scan number and row.
-Thus, input processing can "get ahead" of the output processing but is not
-allowed to "fall behind".  You can achieve several different effects by
-manipulating this interlock rule.  For example, if you pass a target scan
-number greater than the current input scan number, the output processor will
-wait until that scan starts to arrive before producing any output.  (To avoid
-an infinite loop, the target scan number is automatically reset to the last
-scan number when the end of image is reached.  Thus, if you specify a large
-target scan number, the library will just absorb the entire input file and
-then perform an output pass.  This is effectively the same as what
-jpeg_start_decompress() does when you don't select buffered-image mode.)
-When you pass a target scan number equal to the current input scan number,
-the image is displayed no faster than the current input scan arrives.  The
-final possibility is to pass a target scan number less than the current input
-scan number; this disables the input/output interlock and causes the output
-processor to simply display whatever it finds in the image buffer, without
-waiting for input.  (However, the library will not accept a target scan
-number less than one, so you can't avoid waiting for the first scan.)
-
-When data is arriving faster than the output display processing can advance
-through the image, jpeg_consume_input() will store data into the buffered
-image beyond the point at which the output processing is reading data out
-again.  If the input arrives fast enough, it may "wrap around" the buffer to
-the point where the input is more than one whole scan ahead of the output.
-If the output processing simply proceeds through its display pass without
-paying attention to the input, the effect seen on-screen is that the lower
-part of the image is one or more scans better in quality than the upper part.
-Then, when the next output scan is started, you have a choice of what target
-scan number to use.  The recommended choice is to use the current input scan
-number at that time, which implies that you've skipped the output scans
-corresponding to the input scans that were completed while you processed the
-previous output scan.  In this way, the decoder automatically adapts its
-speed to the arriving data, by skipping output scans as necessary to keep up
-with the arriving data.
-
-When using this strategy, you'll want to be sure that you perform a final
-output pass after receiving all the data; otherwise your last display may not
-be full quality across the whole screen.  So the right outer loop logic is
-something like this:
-	do {
-	    absorb any waiting input by calling jpeg_consume_input()
-	    final_pass = jpeg_input_complete(&cinfo);
-	    adjust output decompression parameters if required
-	    jpeg_start_output(&cinfo, cinfo.input_scan_number);
-	    ...
-	    jpeg_finish_output()
-	} while (! final_pass);
-rather than quitting as soon as jpeg_input_complete() returns TRUE.  This
-arrangement makes it simple to use higher-quality decoding parameters
-for the final pass.  But if you don't want to use special parameters for
-the final pass, the right loop logic is like this:
-	for (;;) {
-	    absorb any waiting input by calling jpeg_consume_input()
-	    jpeg_start_output(&cinfo, cinfo.input_scan_number);
-	    ...
-	    jpeg_finish_output()
-	    if (jpeg_input_complete(&cinfo) &&
-	        cinfo.input_scan_number == cinfo.output_scan_number)
-	      break;
-	}
-In this case you don't need to know in advance whether an output pass is to
-be the last one, so it's not necessary to have reached EOF before starting
-the final output pass; rather, what you want to test is whether the output
-pass was performed in sync with the final input scan.  This form of the loop
-will avoid an extra output pass whenever the decoder is able (or nearly able)
-to keep up with the incoming data.
-
-When the data transmission speed is high, you might begin a display pass,
-then find that much or all of the file has arrived before you can complete
-the pass.  (You can detect this by noting the JPEG_REACHED_EOI return code
-from jpeg_consume_input(), or equivalently by testing jpeg_input_complete().)
-In this situation you may wish to abort the current display pass and start a
-new one using the newly arrived information.  To do so, just call
-jpeg_finish_output() and then start a new pass with jpeg_start_output().
-
-A variant strategy is to abort and restart display if more than one complete
-scan arrives during an output pass; this can be detected by noting
-JPEG_REACHED_SOS returns and/or examining cinfo.input_scan_number.  This
-idea should be employed with caution, however, since the display process
-might never get to the bottom of the image before being aborted, resulting
-in the lower part of the screen being several passes worse than the upper.
-In most cases it's probably best to abort an output pass only if the whole
-file has arrived and you want to begin the final output pass immediately.
-
-When receiving data across a communication link, we recommend always using
-the current input scan number for the output target scan number; if a
-higher-quality final pass is to be done, it should be started (aborting any
-incomplete output pass) as soon as the end of file is received.  However,
-many other strategies are possible.  For example, the application can examine
-the parameters of the current input scan and decide whether to display it or
-not.  If the scan contains only chroma data, one might choose not to use it
-as the target scan, expecting that the scan will be small and will arrive
-quickly.  To skip to the next scan, call jpeg_consume_input() until it
-returns JPEG_REACHED_SOS or JPEG_REACHED_EOI.  Or just use the next higher
-number as the target scan for jpeg_start_output(); but that method doesn't
-let you inspect the next scan's parameters before deciding to display it.
-
-
-In buffered-image mode, jpeg_start_decompress() never performs input and
-thus never suspends.  An application that uses input suspension with
-buffered-image mode must be prepared for suspension returns from these
-routines:
-* jpeg_start_output() performs input only if you request 2-pass quantization
-  and the target scan isn't fully read yet.  (This is discussed below.)
-* jpeg_read_scanlines(), as always, returns the number of scanlines that it
-  was able to produce before suspending.
-* jpeg_finish_output() will read any markers following the target scan,
-  up to the end of the file or the SOS marker that begins another scan.
-  (But it reads no input if jpeg_consume_input() has already reached the
-  end of the file or a SOS marker beyond the target output scan.)
-* jpeg_finish_decompress() will read until the end of file, and thus can
-  suspend if the end hasn't already been reached (as can be tested by
-  calling jpeg_input_complete()).
-jpeg_start_output(), jpeg_finish_output(), and jpeg_finish_decompress()
-all return TRUE if they completed their tasks, FALSE if they had to suspend.
-In the event of a FALSE return, the application must load more input data
-and repeat the call.  Applications that use non-suspending data sources need
-not check the return values of these three routines.
-
-
-It is possible to change decoding parameters between output passes in the
-buffered-image mode.  The decoder library currently supports only very
-limited changes of parameters.  ONLY THE FOLLOWING parameter changes are
-allowed after jpeg_start_decompress() is called:
-* dct_method can be changed before each call to jpeg_start_output().
-  For example, one could use a fast DCT method for early scans, changing
-  to a higher quality method for the final scan.
-* dither_mode can be changed before each call to jpeg_start_output();
-  of course this has no impact if not using color quantization.  Typically
-  one would use ordered dither for initial passes, then switch to
-  Floyd-Steinberg dither for the final pass.  Caution: changing dither mode
-  can cause more memory to be allocated by the library.  Although the amount
-  of memory involved is not large (a scanline or so), it may cause the
-  initial max_memory_to_use specification to be exceeded, which in the worst
-  case would result in an out-of-memory failure.
-* do_block_smoothing can be changed before each call to jpeg_start_output().
-  This setting is relevant only when decoding a progressive JPEG image.
-  During the first DC-only scan, block smoothing provides a very "fuzzy" look
-  instead of the very "blocky" look seen without it; which is better seems a
-  matter of personal taste.  But block smoothing is nearly always a win
-  during later stages, especially when decoding a successive-approximation
-  image: smoothing helps to hide the slight blockiness that otherwise shows
-  up on smooth gradients until the lowest coefficient bits are sent.
-* Color quantization mode can be changed under the rules described below.
-  You *cannot* change between full-color and quantized output (because that
-  would alter the required I/O buffer sizes), but you can change which
-  quantization method is used.
-
-When generating color-quantized output, changing quantization method is a
-very useful way of switching between high-speed and high-quality display.
-The library allows you to change among its three quantization methods:
-1. Single-pass quantization to a fixed color cube.
-   Selected by cinfo.two_pass_quantize = FALSE and cinfo.colormap = NULL.
-2. Single-pass quantization to an application-supplied colormap.
-   Selected by setting cinfo.colormap to point to the colormap (the value of
-   two_pass_quantize is ignored); also set cinfo.actual_number_of_colors.
-3. Two-pass quantization to a colormap chosen specifically for the image.
-   Selected by cinfo.two_pass_quantize = TRUE and cinfo.colormap = NULL.
-   (This is the default setting selected by jpeg_read_header, but it is
-   probably NOT what you want for the first pass of progressive display!)
-These methods offer successively better quality and lesser speed.  However,
-only the first method is available for quantizing in non-RGB color spaces.
-
-IMPORTANT: because the different quantizer methods have very different
-working-storage requirements, the library requires you to indicate which
-one(s) you intend to use before you call jpeg_start_decompress().  (If we did
-not require this, the max_memory_to_use setting would be a complete fiction.)
-You do this by setting one or more of these three cinfo fields to TRUE:
-	enable_1pass_quant		Fixed color cube colormap
-	enable_external_quant		Externally-supplied colormap
-	enable_2pass_quant		Two-pass custom colormap
-All three are initialized FALSE by jpeg_read_header().  But
-jpeg_start_decompress() automatically sets TRUE the one selected by the
-current two_pass_quantize and colormap settings, so you only need to set the
-enable flags for any other quantization methods you plan to change to later.
-
-After setting the enable flags correctly at jpeg_start_decompress() time, you
-can change to any enabled quantization method by setting two_pass_quantize
-and colormap properly just before calling jpeg_start_output().  The following
-special rules apply:
-1. You must explicitly set cinfo.colormap to NULL when switching to 1-pass
-   or 2-pass mode from a different mode, or when you want the 2-pass
-   quantizer to be re-run to generate a new colormap.
-2. To switch to an external colormap, or to change to a different external
-   colormap than was used on the prior pass, you must call
-   jpeg_new_colormap() after setting cinfo.colormap.
-NOTE: if you want to use the same colormap as was used in the prior pass,
-you should not do either of these things.  This will save some nontrivial
-switchover costs.
-(These requirements exist because cinfo.colormap will always be non-NULL
-after completing a prior output pass, since both the 1-pass and 2-pass
-quantizers set it to point to their output colormaps.  Thus you have to
-do one of these two things to notify the library that something has changed.
-Yup, it's a bit klugy, but it's necessary to do it this way for backwards
-compatibility.)
-
-Note that in buffered-image mode, the library generates any requested colormap
-during jpeg_start_output(), not during jpeg_start_decompress().
-
-When using two-pass quantization, jpeg_start_output() makes a pass over the
-buffered image to determine the optimum color map; it therefore may take a
-significant amount of time, whereas ordinarily it does little work.  The
-progress monitor hook is called during this pass, if defined.  It is also
-important to realize that if the specified target scan number is greater than
-or equal to the current input scan number, jpeg_start_output() will attempt
-to consume input as it makes this pass.  If you use a suspending data source,
-you need to check for a FALSE return from jpeg_start_output() under these
-conditions.  The combination of 2-pass quantization and a not-yet-fully-read
-target scan is the only case in which jpeg_start_output() will consume input.
-
-
-Application authors who support buffered-image mode may be tempted to use it
-for all JPEG images, even single-scan ones.  This will work, but it is
-inefficient: there is no need to create an image-sized coefficient buffer for
-single-scan images.  Requesting buffered-image mode for such an image wastes
-memory.  Worse, it can cost time on large images, since the buffered data has
-to be swapped out or written to a temporary file.  If you are concerned about
-maximum performance on baseline JPEG files, you should use buffered-image
-mode only when the incoming file actually has multiple scans.  This can be
-tested by calling jpeg_has_multiple_scans(), which will return a correct
-result at any time after jpeg_read_header() completes.
-
-It is also worth noting that when you use jpeg_consume_input() to let input
-processing get ahead of output processing, the resulting pattern of access to
-the coefficient buffer is quite nonsequential.  It's best to use the memory
-manager jmemnobs.c if you can (ie, if you have enough real or virtual main
-memory).  If not, at least make sure that max_memory_to_use is set as high as
-possible.  If the JPEG memory manager has to use a temporary file, you will
-probably see a lot of disk traffic and poor performance.  (This could be
-improved with additional work on the memory manager, but we haven't gotten
-around to it yet.)
-
-In some applications it may be convenient to use jpeg_consume_input() for all
-input processing, including reading the initial markers; that is, you may
-wish to call jpeg_consume_input() instead of jpeg_read_header() during
-startup.  This works, but note that you must check for JPEG_REACHED_SOS and
-JPEG_REACHED_EOI return codes as the equivalent of jpeg_read_header's codes.
-Once the first SOS marker has been reached, you must call
-jpeg_start_decompress() before jpeg_consume_input() will consume more input;
-it'll just keep returning JPEG_REACHED_SOS until you do.  If you read a
-tables-only file this way, jpeg_consume_input() will return JPEG_REACHED_EOI
-without ever returning JPEG_REACHED_SOS; be sure to check for this case.
-If this happens, the decompressor will not read any more input until you call
-jpeg_abort() to reset it.  It is OK to call jpeg_consume_input() even when not
-using buffered-image mode, but in that case it's basically a no-op after the
-initial markers have been read: it will just return JPEG_SUSPENDED.
-
-
-Abbreviated datastreams and multiple images
--------------------------------------------
-
-A JPEG compression or decompression object can be reused to process multiple
-images.  This saves a small amount of time per image by eliminating the
-"create" and "destroy" operations, but that isn't the real purpose of the
-feature.  Rather, reuse of an object provides support for abbreviated JPEG
-datastreams.  Object reuse can also simplify processing a series of images in
-a single input or output file.  This section explains these features.
-
-A JPEG file normally contains several hundred bytes worth of quantization
-and Huffman tables.  In a situation where many images will be stored or
-transmitted with identical tables, this may represent an annoying overhead.
-The JPEG standard therefore permits tables to be omitted.  The standard
-defines three classes of JPEG datastreams:
-  * "Interchange" datastreams contain an image and all tables needed to decode
-     the image.  These are the usual kind of JPEG file.
-  * "Abbreviated image" datastreams contain an image, but are missing some or
-    all of the tables needed to decode that image.
-  * "Abbreviated table specification" (henceforth "tables-only") datastreams
-    contain only table specifications.
-To decode an abbreviated image, it is necessary to load the missing table(s)
-into the decoder beforehand.  This can be accomplished by reading a separate
-tables-only file.  A variant scheme uses a series of images in which the first
-image is an interchange (complete) datastream, while subsequent ones are
-abbreviated and rely on the tables loaded by the first image.  It is assumed
-that once the decoder has read a table, it will remember that table until a
-new definition for the same table number is encountered.
-
-It is the application designer's responsibility to figure out how to associate
-the correct tables with an abbreviated image.  While abbreviated datastreams
-can be useful in a closed environment, their use is strongly discouraged in
-any situation where data exchange with other applications might be needed.
-Caveat designer.
-
-The JPEG library provides support for reading and writing any combination of
-tables-only datastreams and abbreviated images.  In both compression and
-decompression objects, a quantization or Huffman table will be retained for
-the lifetime of the object, unless it is overwritten by a new table definition.
-
-
-To create abbreviated image datastreams, it is only necessary to tell the
-compressor not to emit some or all of the tables it is using.  Each
-quantization and Huffman table struct contains a boolean field "sent_table",
-which normally is initialized to FALSE.  For each table used by the image, the
-header-writing process emits the table and sets sent_table = TRUE unless it is
-already TRUE.  (In normal usage, this prevents outputting the same table
-definition multiple times, as would otherwise occur because the chroma
-components typically share tables.)  Thus, setting this field to TRUE before
-calling jpeg_start_compress() will prevent the table from being written at
-all.
-
-If you want to create a "pure" abbreviated image file containing no tables,
-just call "jpeg_suppress_tables(&cinfo, TRUE)" after constructing all the
-tables.  If you want to emit some but not all tables, you'll need to set the
-individual sent_table fields directly.
-
-To create an abbreviated image, you must also call jpeg_start_compress()
-with a second parameter of FALSE, not TRUE.  Otherwise jpeg_start_compress()
-will force all the sent_table fields to FALSE.  (This is a safety feature to
-prevent abbreviated images from being created accidentally.)
-
-To create a tables-only file, perform the same parameter setup that you
-normally would, but instead of calling jpeg_start_compress() and so on, call
-jpeg_write_tables(&cinfo).  This will write an abbreviated datastream
-containing only SOI, DQT and/or DHT markers, and EOI.  All the quantization
-and Huffman tables that are currently defined in the compression object will
-be emitted unless their sent_tables flag is already TRUE, and then all the
-sent_tables flags will be set TRUE.
-
-A sure-fire way to create matching tables-only and abbreviated image files
-is to proceed as follows:
-
-	create JPEG compression object
-	set JPEG parameters
-	set destination to tables-only file
-	jpeg_write_tables(&cinfo);
-	set destination to image file
-	jpeg_start_compress(&cinfo, FALSE);
-	write data...
-	jpeg_finish_compress(&cinfo);
-
-Since the JPEG parameters are not altered between writing the table file and
-the abbreviated image file, the same tables are sure to be used.  Of course,
-you can repeat the jpeg_start_compress() ... jpeg_finish_compress() sequence
-many times to produce many abbreviated image files matching the table file.
-
-You cannot suppress output of the computed Huffman tables when Huffman
-optimization is selected.  (If you could, there'd be no way to decode the
-image...)  Generally, you don't want to set optimize_coding = TRUE when
-you are trying to produce abbreviated files.
-
-In some cases you might want to compress an image using tables which are
-not stored in the application, but are defined in an interchange or
-tables-only file readable by the application.  This can be done by setting up
-a JPEG decompression object to read the specification file, then copying the
-tables into your compression object.  See jpeg_copy_critical_parameters()
-for an example of copying quantization tables.
-
-
-To read abbreviated image files, you simply need to load the proper tables
-into the decompression object before trying to read the abbreviated image.
-If the proper tables are stored in the application program, you can just
-allocate the table structs and fill in their contents directly.  For example,
-to load a fixed quantization table into table slot "n":
-
-    if (cinfo.quant_tbl_ptrs[n] == NULL)
-      cinfo.quant_tbl_ptrs[n] = jpeg_alloc_quant_table((j_common_ptr) &cinfo);
-    quant_ptr = cinfo.quant_tbl_ptrs[n];	/* quant_ptr is JQUANT_TBL* */
-    for (i = 0; i < 64; i++) {
-      /* Qtable[] is desired quantization table, in natural array order */
-      quant_ptr->quantval[i] = Qtable[i];
-    }
-
-Code to load a fixed Huffman table is typically (for AC table "n"):
-
-    if (cinfo.ac_huff_tbl_ptrs[n] == NULL)
-      cinfo.ac_huff_tbl_ptrs[n] = jpeg_alloc_huff_table((j_common_ptr) &cinfo);
-    huff_ptr = cinfo.ac_huff_tbl_ptrs[n];	/* huff_ptr is JHUFF_TBL* */
-    for (i = 1; i <= 16; i++) {
-      /* counts[i] is number of Huffman codes of length i bits, i=1..16 */
-      huff_ptr->bits[i] = counts[i];
-    }
-    for (i = 0; i < 256; i++) {
-      /* symbols[] is the list of Huffman symbols, in code-length order */
-      huff_ptr->huffval[i] = symbols[i];
-    }
-
-(Note that trying to set cinfo.quant_tbl_ptrs[n] to point directly at a
-constant JQUANT_TBL object is not safe.  If the incoming file happened to
-contain a quantization table definition, your master table would get
-overwritten!  Instead allocate a working table copy and copy the master table
-into it, as illustrated above.  Ditto for Huffman tables, of course.)
-
-You might want to read the tables from a tables-only file, rather than
-hard-wiring them into your application.  The jpeg_read_header() call is
-sufficient to read a tables-only file.  You must pass a second parameter of
-FALSE to indicate that you do not require an image to be present.  Thus, the
-typical scenario is
-
-	create JPEG decompression object
-	set source to tables-only file
-	jpeg_read_header(&cinfo, FALSE);
-	set source to abbreviated image file
-	jpeg_read_header(&cinfo, TRUE);
-	set decompression parameters
-	jpeg_start_decompress(&cinfo);
-	read data...
-	jpeg_finish_decompress(&cinfo);
-
-In some cases, you may want to read a file without knowing whether it contains
-an image or just tables.  In that case, pass FALSE and check the return value
-from jpeg_read_header(): it will be JPEG_HEADER_OK if an image was found,
-JPEG_HEADER_TABLES_ONLY if only tables were found.  (A third return value,
-JPEG_SUSPENDED, is possible when using a suspending data source manager.)
-Note that jpeg_read_header() will not complain if you read an abbreviated
-image for which you haven't loaded the missing tables; the missing-table check
-occurs later, in jpeg_start_decompress().
-
-
-It is possible to read a series of images from a single source file by
-repeating the jpeg_read_header() ... jpeg_finish_decompress() sequence,
-without releasing/recreating the JPEG object or the data source module.
-(If you did reinitialize, any partial bufferload left in the data source
-buffer at the end of one image would be discarded, causing you to lose the
-start of the next image.)  When you use this method, stored tables are
-automatically carried forward, so some of the images can be abbreviated images
-that depend on tables from earlier images.
-
-If you intend to write a series of images into a single destination file,
-you might want to make a specialized data destination module that doesn't
-flush the output buffer at term_destination() time.  This would speed things
-up by some trifling amount.  Of course, you'd need to remember to flush the
-buffer after the last image.  You can make the later images be abbreviated
-ones by passing FALSE to jpeg_start_compress().
-
-
-Special markers
----------------
-
-Some applications may need to insert or extract special data in the JPEG
-datastream.  The JPEG standard provides marker types "COM" (comment) and
-"APP0" through "APP15" (application) to hold application-specific data.
-Unfortunately, the use of these markers is not specified by the standard.
-COM markers are fairly widely used to hold user-supplied text.  The JFIF file
-format spec uses APP0 markers with specified initial strings to hold certain
-data.  Adobe applications use APP14 markers beginning with the string "Adobe"
-for miscellaneous data.  Other APPn markers are rarely seen, but might
-contain almost anything.
-
-If you wish to store user-supplied text, we recommend you use COM markers
-and place readable 7-bit ASCII text in them.  Newline conventions are not
-standardized --- expect to find LF (Unix style), CR/LF (DOS style), or CR
-(Mac style).  A robust COM reader should be able to cope with random binary
-garbage, including nulls, since some applications generate COM markers
-containing non-ASCII junk.  (But yours should not be one of them.)
-
-For program-supplied data, use an APPn marker, and be sure to begin it with an
-identifying string so that you can tell whether the marker is actually yours.
-It's probably best to avoid using APP0 or APP14 for any private markers.
-(NOTE: the upcoming SPIFF standard will use APP8 markers; we recommend you
-not use APP8 markers for any private purposes, either.)
-
-Keep in mind that at most 65533 bytes can be put into one marker, but you
-can have as many markers as you like.
-
-By default, the IJG compression library will write a JFIF APP0 marker if the
-selected JPEG colorspace is grayscale or YCbCr, or an Adobe APP14 marker if
-the selected colorspace is RGB, CMYK, or YCCK.  You can disable this, but
-we don't recommend it.  The decompression library will recognize JFIF and
-Adobe markers and will set the JPEG colorspace properly when one is found.
-
-
-You can write special markers immediately following the datastream header by
-calling jpeg_write_marker() after jpeg_start_compress() and before the first
-call to jpeg_write_scanlines().  When you do this, the markers appear after
-the SOI and the JFIF APP0 and Adobe APP14 markers (if written), but before
-all else.  Specify the marker type parameter as "JPEG_COM" for COM or
-"JPEG_APP0 + n" for APPn.  (Actually, jpeg_write_marker will let you write
-any marker type, but we don't recommend writing any other kinds of marker.)
-For example, to write a user comment string pointed to by comment_text:
-	jpeg_write_marker(cinfo, JPEG_COM, comment_text, strlen(comment_text));
-
-If it's not convenient to store all the marker data in memory at once,
-you can instead call jpeg_write_m_header() followed by multiple calls to
-jpeg_write_m_byte().  If you do it this way, it's your responsibility to
-call jpeg_write_m_byte() exactly the number of times given in the length
-parameter to jpeg_write_m_header().  (This method lets you empty the
-output buffer partway through a marker, which might be important when
-using a suspending data destination module.  In any case, if you are using
-a suspending destination, you should flush its buffer after inserting
-any special markers.  See "I/O suspension".)
-
-Or, if you prefer to synthesize the marker byte sequence yourself,
-you can just cram it straight into the data destination module.
-
-If you are writing JFIF 1.02 extension markers (thumbnail images), don't
-forget to set cinfo.JFIF_minor_version = 2 so that the encoder will write the
-correct JFIF version number in the JFIF header marker.  The library's default
-is to write version 1.01, but that's wrong if you insert any 1.02 extension
-markers.  (We could probably get away with just defaulting to 1.02, but there
-used to be broken decoders that would complain about unknown minor version
-numbers.  To reduce compatibility risks it's safest not to write 1.02 unless
-you are actually using 1.02 extensions.)
-
-
-When reading, two methods of handling special markers are available:
-1. You can ask the library to save the contents of COM and/or APPn markers
-into memory, and then examine them at your leisure afterwards.
-2. You can supply your own routine to process COM and/or APPn markers
-on-the-fly as they are read.
-The first method is simpler to use, especially if you are using a suspending
-data source; writing a marker processor that copes with input suspension is
-not easy (consider what happens if the marker is longer than your available
-input buffer).  However, the second method conserves memory since the marker
-data need not be kept around after it's been processed.
-
-For either method, you'd normally set up marker handling after creating a
-decompression object and before calling jpeg_read_header(), because the
-markers of interest will typically be near the head of the file and so will
-be scanned by jpeg_read_header.  Once you've established a marker handling
-method, it will be used for the life of that decompression object
-(potentially many datastreams), unless you change it.  Marker handling is
-determined separately for COM markers and for each APPn marker code.
-
-
-To save the contents of special markers in memory, call
-	jpeg_save_markers(cinfo, marker_code, length_limit)
-where marker_code is the marker type to save, JPEG_COM or JPEG_APP0+n.
-(To arrange to save all the special marker types, you need to call this
-routine 17 times, for COM and APP0-APP15.)  If the incoming marker is longer
-than length_limit data bytes, only length_limit bytes will be saved; this
-parameter allows you to avoid chewing up memory when you only need to see the
-first few bytes of a potentially large marker.  If you want to save all the
-data, set length_limit to 0xFFFF; that is enough since marker lengths are only
-16 bits.  As a special case, setting length_limit to 0 prevents that marker
-type from being saved at all.  (That is the default behavior, in fact.)
-
-After jpeg_read_header() completes, you can examine the special markers by
-following the cinfo->marker_list pointer chain.  All the special markers in
-the file appear in this list, in order of their occurrence in the file (but
-omitting any markers of types you didn't ask for).  Both the original data
-length and the saved data length are recorded for each list entry; the latter
-will not exceed length_limit for the particular marker type.  Note that these
-lengths exclude the marker length word, whereas the stored representation
-within the JPEG file includes it.  (Hence the maximum data length is really
-only 65533.)
-
-It is possible that additional special markers appear in the file beyond the
-SOS marker at which jpeg_read_header stops; if so, the marker list will be
-extended during reading of the rest of the file.  This is not expected to be
-common, however.  If you are short on memory you may want to reset the length
-limit to zero for all marker types after finishing jpeg_read_header, to
-ensure that the max_memory_to_use setting cannot be exceeded due to addition
-of later markers.
-
-The marker list remains stored until you call jpeg_finish_decompress or
-jpeg_abort, at which point the memory is freed and the list is set to empty.
-(jpeg_destroy also releases the storage, of course.)
-
-Note that the library is internally interested in APP0 and APP14 markers;
-if you try to set a small nonzero length limit on these types, the library
-will silently force the length up to the minimum it wants.  (But you can set
-a zero length limit to prevent them from being saved at all.)  Also, in a
-16-bit environment, the maximum length limit may be constrained to less than
-65533 by malloc() limitations.  It is therefore best not to assume that the
-effective length limit is exactly what you set it to be.
-
-
-If you want to supply your own marker-reading routine, you do it by calling
-jpeg_set_marker_processor().  A marker processor routine must have the
-signature
-	boolean jpeg_marker_parser_method (j_decompress_ptr cinfo)
-Although the marker code is not explicitly passed, the routine can find it
-in cinfo->unread_marker.  At the time of call, the marker proper has been
-read from the data source module.  The processor routine is responsible for
-reading the marker length word and the remaining parameter bytes, if any.
-Return TRUE to indicate success.  (FALSE should be returned only if you are
-using a suspending data source and it tells you to suspend.  See the standard
-marker processors in jdmarker.c for appropriate coding methods if you need to
-use a suspending data source.)
-
-If you override the default APP0 or APP14 processors, it is up to you to
-recognize JFIF and Adobe markers if you want colorspace recognition to occur
-properly.  We recommend copying and extending the default processors if you
-want to do that.  (A better idea is to save these marker types for later
-examination by calling jpeg_save_markers(); that method doesn't interfere
-with the library's own processing of these markers.)
-
-jpeg_set_marker_processor() and jpeg_save_markers() are mutually exclusive
---- if you call one it overrides any previous call to the other, for the
-particular marker type specified.
-
-A simple example of an external COM processor can be found in djpeg.c.
-Also, see jpegtran.c for an example of using jpeg_save_markers.
-
-
-Raw (downsampled) image data
-----------------------------
-
-Some applications need to supply already-downsampled image data to the JPEG
-compressor, or to receive raw downsampled data from the decompressor.  The
-library supports this requirement by allowing the application to write or
-read raw data, bypassing the normal preprocessing or postprocessing steps.
-The interface is different from the standard one and is somewhat harder to
-use.  If your interest is merely in bypassing color conversion, we recommend
-that you use the standard interface and simply set jpeg_color_space =
-in_color_space (or jpeg_color_space = out_color_space for decompression).
-The mechanism described in this section is necessary only to supply or
-receive downsampled image data, in which not all components have the same
-dimensions.
-
-
-To compress raw data, you must supply the data in the colorspace to be used
-in the JPEG file (please read the earlier section on Special color spaces)
-and downsampled to the sampling factors specified in the JPEG parameters.
-You must supply the data in the format used internally by the JPEG library,
-namely a JSAMPIMAGE array.  This is an array of pointers to two-dimensional
-arrays, each of type JSAMPARRAY.  Each 2-D array holds the values for one
-color component.  This structure is necessary since the components are of
-different sizes.  If the image dimensions are not a multiple of the MCU size,
-you must also pad the data correctly (usually, this is done by replicating
-the last column and/or row).  The data must be padded to a multiple of a DCT
-block in each component: that is, each downsampled row must contain a
-multiple of 8 valid samples, and there must be a multiple of 8 sample rows
-for each component.  (For applications such as conversion of digital TV
-images, the standard image size is usually a multiple of the DCT block size,
-so that no padding need actually be done.)
-
-The procedure for compression of raw data is basically the same as normal
-compression, except that you call jpeg_write_raw_data() in place of
-jpeg_write_scanlines().  Before calling jpeg_start_compress(), you must do
-the following:
-  * Set cinfo->raw_data_in to TRUE.  (It is set FALSE by jpeg_set_defaults().)
-    This notifies the library that you will be supplying raw data.
-  * Ensure jpeg_color_space is correct --- an explicit jpeg_set_colorspace()
-    call is a good idea.  Note that since color conversion is bypassed,
-    in_color_space is ignored, except that jpeg_set_defaults() uses it to
-    choose the default jpeg_color_space setting.
-  * Ensure the sampling factors, cinfo->comp_info[i].h_samp_factor and
-    cinfo->comp_info[i].v_samp_factor, are correct.  Since these indicate the
-    dimensions of the data you are supplying, it's wise to set them
-    explicitly, rather than assuming the library's defaults are what you want.
-
-To pass raw data to the library, call jpeg_write_raw_data() in place of
-jpeg_write_scanlines().  The two routines work similarly except that
-jpeg_write_raw_data takes a JSAMPIMAGE data array rather than JSAMPARRAY.
-The scanlines count passed to and returned from jpeg_write_raw_data is
-measured in terms of the component with the largest v_samp_factor.
-
-jpeg_write_raw_data() processes one MCU row per call, which is to say
-v_samp_factor*DCTSIZE sample rows of each component.  The passed num_lines
-value must be at least max_v_samp_factor*DCTSIZE, and the return value will
-be exactly that amount (or possibly some multiple of that amount, in future
-library versions).  This is true even on the last call at the bottom of the
-image; don't forget to pad your data as necessary.
-
-The required dimensions of the supplied data can be computed for each
-component as
-	cinfo->comp_info[i].width_in_blocks*DCTSIZE  samples per row
-	cinfo->comp_info[i].height_in_blocks*DCTSIZE rows in image
-after jpeg_start_compress() has initialized those fields.  If the valid data
-is smaller than this, it must be padded appropriately.  For some sampling
-factors and image sizes, additional dummy DCT blocks are inserted to make
-the image a multiple of the MCU dimensions.  The library creates such dummy
-blocks itself; it does not read them from your supplied data.  Therefore you
-need never pad by more than DCTSIZE samples.  An example may help here.
-Assume 2h2v downsampling of YCbCr data, that is
-	cinfo->comp_info[0].h_samp_factor = 2		for Y
-	cinfo->comp_info[0].v_samp_factor = 2
-	cinfo->comp_info[1].h_samp_factor = 1		for Cb
-	cinfo->comp_info[1].v_samp_factor = 1
-	cinfo->comp_info[2].h_samp_factor = 1		for Cr
-	cinfo->comp_info[2].v_samp_factor = 1
-and suppose that the nominal image dimensions (cinfo->image_width and
-cinfo->image_height) are 101x101 pixels.  Then jpeg_start_compress() will
-compute downsampled_width = 101 and width_in_blocks = 13 for Y,
-downsampled_width = 51 and width_in_blocks = 7 for Cb and Cr (and the same
-for the height fields).  You must pad the Y data to at least 13*8 = 104
-columns and rows, the Cb/Cr data to at least 7*8 = 56 columns and rows.  The
-MCU height is max_v_samp_factor = 2 DCT rows so you must pass at least 16
-scanlines on each call to jpeg_write_raw_data(), which is to say 16 actual
-sample rows of Y and 8 each of Cb and Cr.  A total of 7 MCU rows are needed,
-so you must pass a total of 7*16 = 112 "scanlines".  The last DCT block row
-of Y data is dummy, so it doesn't matter what you pass for it in the data
-arrays, but the scanlines count must total up to 112 so that all of the Cb
-and Cr data gets passed.
-
-Output suspension is supported with raw-data compression: if the data
-destination module suspends, jpeg_write_raw_data() will return 0.
-In this case the same data rows must be passed again on the next call.
-
-
-Decompression with raw data output implies bypassing all postprocessing:
-you cannot ask for rescaling or color quantization, for instance.  More
-seriously, you must deal with the color space and sampling factors present in
-the incoming file.  If your application only handles, say, 2h1v YCbCr data,
-you must check for and fail on other color spaces or other sampling factors.
-The library will not convert to a different color space for you.
-
-To obtain raw data output, set cinfo->raw_data_out = TRUE before
-jpeg_start_decompress() (it is set FALSE by jpeg_read_header()).  Be sure to
-verify that the color space and sampling factors are ones you can handle.
-Then call jpeg_read_raw_data() in place of jpeg_read_scanlines().  The
-decompression process is otherwise the same as usual.
-
-jpeg_read_raw_data() returns one MCU row per call, and thus you must pass a
-buffer of at least max_v_samp_factor*DCTSIZE scanlines (scanline counting is
-the same as for raw-data compression).  The buffer you pass must be large
-enough to hold the actual data plus padding to DCT-block boundaries.  As with
-compression, any entirely dummy DCT blocks are not processed so you need not
-allocate space for them, but the total scanline count includes them.  The
-above example of computing buffer dimensions for raw-data compression is
-equally valid for decompression.
-
-Input suspension is supported with raw-data decompression: if the data source
-module suspends, jpeg_read_raw_data() will return 0.  You can also use
-buffered-image mode to read raw data in multiple passes.
-
-
-Really raw data: DCT coefficients
----------------------------------
-
-It is possible to read or write the contents of a JPEG file as raw DCT
-coefficients.  This facility is mainly intended for use in lossless
-transcoding between different JPEG file formats.  Other possible applications
-include lossless cropping of a JPEG image, lossless reassembly of a
-multi-strip or multi-tile TIFF/JPEG file into a single JPEG datastream, etc.
-
-To read the contents of a JPEG file as DCT coefficients, open the file and do
-jpeg_read_header() as usual.  But instead of calling jpeg_start_decompress()
-and jpeg_read_scanlines(), call jpeg_read_coefficients().  This will read the
-entire image into a set of virtual coefficient-block arrays, one array per
-component.  The return value is a pointer to an array of virtual-array
-descriptors.  Each virtual array can be accessed directly using the JPEG
-memory manager's access_virt_barray method (see Memory management, below,
-and also read structure.doc's discussion of virtual array handling).  Or,
-for simple transcoding to a different JPEG file format, the array list can
-just be handed directly to jpeg_write_coefficients().
-
-Each block in the block arrays contains quantized coefficient values in
-normal array order (not JPEG zigzag order).  The block arrays contain only
-DCT blocks containing real data; any entirely-dummy blocks added to fill out
-interleaved MCUs at the right or bottom edges of the image are discarded
-during reading and are not stored in the block arrays.  (The size of each
-block array can be determined from the width_in_blocks and height_in_blocks
-fields of the component's comp_info entry.)  This is also the data format
-expected by jpeg_write_coefficients().
-
-When you are done using the virtual arrays, call jpeg_finish_decompress()
-to release the array storage and return the decompression object to an idle
-state; or just call jpeg_destroy() if you don't need to reuse the object.
-
-If you use a suspending data source, jpeg_read_coefficients() will return
-NULL if it is forced to suspend; a non-NULL return value indicates successful
-completion.  You need not test for a NULL return value when using a
-non-suspending data source.
-
-It is also possible to call jpeg_read_coefficients() to obtain access to the
-decoder's coefficient arrays during a normal decode cycle in buffered-image
-mode.  This frammish might be useful for progressively displaying an incoming
-image and then re-encoding it without loss.  To do this, decode in buffered-
-image mode as discussed previously, then call jpeg_read_coefficients() after
-the last jpeg_finish_output() call.  The arrays will be available for your use
-until you call jpeg_finish_decompress().
-
-
-To write the contents of a JPEG file as DCT coefficients, you must provide
-the DCT coefficients stored in virtual block arrays.  You can either pass
-block arrays read from an input JPEG file by jpeg_read_coefficients(), or
-allocate virtual arrays from the JPEG compression object and fill them
-yourself.  In either case, jpeg_write_coefficients() is substituted for
-jpeg_start_compress() and jpeg_write_scanlines().  Thus the sequence is
-  * Create compression object
-  * Set all compression parameters as necessary
-  * Request virtual arrays if needed
-  * jpeg_write_coefficients()
-  * jpeg_finish_compress()
-  * Destroy or re-use compression object
-jpeg_write_coefficients() is passed a pointer to an array of virtual block
-array descriptors; the number of arrays is equal to cinfo.num_components.
-
-The virtual arrays need only have been requested, not realized, before
-jpeg_write_coefficients() is called.  A side-effect of
-jpeg_write_coefficients() is to realize any virtual arrays that have been
-requested from the compression object's memory manager.  Thus, when obtaining
-the virtual arrays from the compression object, you should fill the arrays
-after calling jpeg_write_coefficients().  The data is actually written out
-when you call jpeg_finish_compress(); jpeg_write_coefficients() only writes
-the file header.
-
-When writing raw DCT coefficients, it is crucial that the JPEG quantization
-tables and sampling factors match the way the data was encoded, or the
-resulting file will be invalid.  For transcoding from an existing JPEG file,
-we recommend using jpeg_copy_critical_parameters().  This routine initializes
-all the compression parameters to default values (like jpeg_set_defaults()),
-then copies the critical information from a source decompression object.
-The decompression object should have just been used to read the entire
-JPEG input file --- that is, it should be awaiting jpeg_finish_decompress().
-
-jpeg_write_coefficients() marks all tables stored in the compression object
-as needing to be written to the output file (thus, it acts like
-jpeg_start_compress(cinfo, TRUE)).  This is for safety's sake, to avoid
-emitting abbreviated JPEG files by accident.  If you really want to emit an
-abbreviated JPEG file, call jpeg_suppress_tables(), or set the tables'
-individual sent_table flags, between calling jpeg_write_coefficients() and
-jpeg_finish_compress().
-
-
-Progress monitoring
--------------------
-
-Some applications may need to regain control from the JPEG library every so
-often.  The typical use of this feature is to produce a percent-done bar or
-other progress display.  (For a simple example, see cjpeg.c or djpeg.c.)
-Although you do get control back frequently during the data-transferring pass
-(the jpeg_read_scanlines or jpeg_write_scanlines loop), any additional passes
-will occur inside jpeg_finish_compress or jpeg_start_decompress; those
-routines may take a long time to execute, and you don't get control back
-until they are done.
-
-You can define a progress-monitor routine which will be called periodically
-by the library.  No guarantees are made about how often this call will occur,
-so we don't recommend you use it for mouse tracking or anything like that.
-At present, a call will occur once per MCU row, scanline, or sample row
-group, whichever unit is convenient for the current processing mode; so the
-wider the image, the longer the time between calls.  During the data
-transferring pass, only one call occurs per call of jpeg_read_scanlines or
-jpeg_write_scanlines, so don't pass a large number of scanlines at once if
-you want fine resolution in the progress count.  (If you really need to use
-the callback mechanism for time-critical tasks like mouse tracking, you could
-insert additional calls inside some of the library's inner loops.)
-
-To establish a progress-monitor callback, create a struct jpeg_progress_mgr,
-fill in its progress_monitor field with a pointer to your callback routine,
-and set cinfo->progress to point to the struct.  The callback will be called
-whenever cinfo->progress is non-NULL.  (This pointer is set to NULL by
-jpeg_create_compress or jpeg_create_decompress; the library will not change
-it thereafter.  So if you allocate dynamic storage for the progress struct,
-make sure it will live as long as the JPEG object does.  Allocating from the
-JPEG memory manager with lifetime JPOOL_PERMANENT will work nicely.)  You
-can use the same callback routine for both compression and decompression.
-
-The jpeg_progress_mgr struct contains four fields which are set by the library:
-	long pass_counter;	/* work units completed in this pass */
-	long pass_limit;	/* total number of work units in this pass */
-	int completed_passes;	/* passes completed so far */
-	int total_passes;	/* total number of passes expected */
-During any one pass, pass_counter increases from 0 up to (not including)
-pass_limit; the step size is usually but not necessarily 1.  The pass_limit
-value may change from one pass to another.  The expected total number of
-passes is in total_passes, and the number of passes already completed is in
-completed_passes.  Thus the fraction of work completed may be estimated as
-		completed_passes + (pass_counter/pass_limit)
-		--------------------------------------------
-				total_passes
-ignoring the fact that the passes may not be equal amounts of work.
-
-When decompressing, pass_limit can even change within a pass, because it
-depends on the number of scans in the JPEG file, which isn't always known in
-advance.  The computed fraction-of-work-done may jump suddenly (if the library
-discovers it has overestimated the number of scans) or even decrease (in the
-opposite case).  It is not wise to put great faith in the work estimate.
-
-When using the decompressor's buffered-image mode, the progress monitor work
-estimate is likely to be completely unhelpful, because the library has no way
-to know how many output passes will be demanded of it.  Currently, the library
-sets total_passes based on the assumption that there will be one more output
-pass if the input file end hasn't yet been read (jpeg_input_complete() isn't
-TRUE), but no more output passes if the file end has been reached when the
-output pass is started.  This means that total_passes will rise as additional
-output passes are requested.  If you have a way of determining the input file
-size, estimating progress based on the fraction of the file that's been read
-will probably be more useful than using the library's value.
-
-
-Memory management
------------------
-
-This section covers some key facts about the JPEG library's built-in memory
-manager.  For more info, please read structure.doc's section about the memory
-manager, and consult the source code if necessary.
-
-All memory and temporary file allocation within the library is done via the
-memory manager.  If necessary, you can replace the "back end" of the memory
-manager to control allocation yourself (for example, if you don't want the
-library to use malloc() and free() for some reason).
-
-Some data is allocated "permanently" and will not be freed until the JPEG
-object is destroyed.  Most data is allocated "per image" and is freed by
-jpeg_finish_compress, jpeg_finish_decompress, or jpeg_abort.  You can call the
-memory manager yourself to allocate structures that will automatically be
-freed at these times.  Typical code for this is
-  ptr = (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, size);
-Use JPOOL_PERMANENT to get storage that lasts as long as the JPEG object.
-Use alloc_large instead of alloc_small for anything bigger than a few Kbytes.
-There are also alloc_sarray and alloc_barray routines that automatically
-build 2-D sample or block arrays.
-
-The library's minimum space requirements to process an image depend on the
-image's width, but not on its height, because the library ordinarily works
-with "strip" buffers that are as wide as the image but just a few rows high.
-Some operating modes (eg, two-pass color quantization) require full-image
-buffers.  Such buffers are treated as "virtual arrays": only the current strip
-need be in memory, and the rest can be swapped out to a temporary file.
-
-If you use the simplest memory manager back end (jmemnobs.c), then no
-temporary files are used; virtual arrays are simply malloc()'d.  Images bigger
-than memory can be processed only if your system supports virtual memory.
-The other memory manager back ends support temporary files of various flavors
-and thus work in machines without virtual memory.  They may also be useful on
-Unix machines if you need to process images that exceed available swap space.
-
-When using temporary files, the library will make the in-memory buffers for
-its virtual arrays just big enough to stay within a "maximum memory" setting.
-Your application can set this limit by setting cinfo->mem->max_memory_to_use
-after creating the JPEG object.  (Of course, there is still a minimum size for
-the buffers, so the max-memory setting is effective only if it is bigger than
-the minimum space needed.)  If you allocate any large structures yourself, you
-must allocate them before jpeg_start_compress() or jpeg_start_decompress() in
-order to have them counted against the max memory limit.  Also keep in mind
-that space allocated with alloc_small() is ignored, on the assumption that
-it's too small to be worth worrying about; so a reasonable safety margin
-should be left when setting max_memory_to_use.
-
-If you use the jmemname.c or jmemdos.c memory manager back end, it is
-important to clean up the JPEG object properly to ensure that the temporary
-files get deleted.  (This is especially crucial with jmemdos.c, where the
-"temporary files" may be extended-memory segments; if they are not freed,
-DOS will require a reboot to recover the memory.)  Thus, with these memory
-managers, it's a good idea to provide a signal handler that will trap any
-early exit from your program.  The handler should call either jpeg_abort()
-or jpeg_destroy() for any active JPEG objects.  A handler is not needed with
-jmemnobs.c, and shouldn't be necessary with jmemansi.c or jmemmac.c either,
-since the C library is supposed to take care of deleting files made with
-tmpfile().
-
-
-Memory usage
-------------
-
-Working memory requirements while performing compression or decompression
-depend on image dimensions, image characteristics (such as colorspace and
-JPEG process), and operating mode (application-selected options).
-
-As of v6b, the decompressor requires:
- 1. About 24K in more-or-less-fixed-size data.  This varies a bit depending
-    on operating mode and image characteristics (particularly color vs.
-    grayscale), but it doesn't depend on image dimensions.
- 2. Strip buffers (of size proportional to the image width) for IDCT and
-    upsampling results.  The worst case for commonly used sampling factors
-    is about 34 bytes * width in pixels for a color image.  A grayscale image
-    only needs about 8 bytes per pixel column.
- 3. A full-image DCT coefficient buffer is needed to decode a multi-scan JPEG
-    file (including progressive JPEGs), or whenever you select buffered-image
-    mode.  This takes 2 bytes/coefficient.  At typical 2x2 sampling, that's
-    3 bytes per pixel for a color image.  Worst case (1x1 sampling) requires
-    6 bytes/pixel.  For grayscale, figure 2 bytes/pixel.
- 4. To perform 2-pass color quantization, the decompressor also needs a
-    128K color lookup table and a full-image pixel buffer (3 bytes/pixel).
-This does not count any memory allocated by the application, such as a
-buffer to hold the final output image.
-
-The above figures are valid for 8-bit JPEG data precision and a machine with
-32-bit ints.  For 12-bit JPEG data, double the size of the strip buffers and
-quantization pixel buffer.  The "fixed-size" data will be somewhat smaller
-with 16-bit ints, larger with 64-bit ints.  Also, CMYK or other unusual
-color spaces will require different amounts of space.
-
-The full-image coefficient and pixel buffers, if needed at all, do not
-have to be fully RAM resident; you can have the library use temporary
-files instead when the total memory usage would exceed a limit you set.
-(But if your OS supports virtual memory, it's probably better to just use
-jmemnobs and let the OS do the swapping.)
-
-The compressor's memory requirements are similar, except that it has no need
-for color quantization.  Also, it needs a full-image DCT coefficient buffer
-if Huffman-table optimization is asked for, even if progressive mode is not
-requested.
-
-If you need more detailed information about memory usage in a particular
-situation, you can enable the MEM_STATS code in jmemmgr.c.
-
-
-Library compile-time options
-----------------------------
-
-A number of compile-time options are available by modifying jmorecfg.h.
-
-The JPEG standard provides for both the baseline 8-bit DCT process and
-a 12-bit DCT process.  The IJG code supports 12-bit lossy JPEG if you define
-BITS_IN_JSAMPLE as 12 rather than 8.  Note that this causes JSAMPLE to be
-larger than a char, so it affects the surrounding application's image data.
-The sample applications cjpeg and djpeg can support 12-bit mode only for PPM
-and GIF file formats; you must disable the other file formats to compile a
-12-bit cjpeg or djpeg.  (install.doc has more information about that.)
-At present, a 12-bit library can handle *only* 12-bit images, not both
-precisions.  (If you need to include both 8- and 12-bit libraries in a single
-application, you could probably do it by defining NEED_SHORT_EXTERNAL_NAMES
-for just one of the copies.  You'd have to access the 8-bit and 12-bit copies
-from separate application source files.  This is untested ... if you try it,
-we'd like to hear whether it works!)
-
-Note that a 12-bit library always compresses in Huffman optimization mode,
-in order to generate valid Huffman tables.  This is necessary because our
-default Huffman tables only cover 8-bit data.  If you need to output 12-bit
-files in one pass, you'll have to supply suitable default Huffman tables.
-You may also want to supply your own DCT quantization tables; the existing
-quality-scaling code has been developed for 8-bit use, and probably doesn't
-generate especially good tables for 12-bit.
-
-The maximum number of components (color channels) in the image is determined
-by MAX_COMPONENTS.  The JPEG standard allows up to 255 components, but we
-expect that few applications will need more than four or so.
-
-On machines with unusual data type sizes, you may be able to improve
-performance or reduce memory space by tweaking the various typedefs in
-jmorecfg.h.  In particular, on some RISC CPUs, access to arrays of "short"s
-is quite slow; consider trading memory for speed by making JCOEF, INT16, and
-UINT16 be "int" or "unsigned int".  UINT8 is also a candidate to become int.
-You probably don't want to make JSAMPLE be int unless you have lots of memory
-to burn.
-
-You can reduce the size of the library by compiling out various optional
-functions.  To do this, undefine xxx_SUPPORTED symbols as necessary.
-
-You can also save a few K by not having text error messages in the library;
-the standard error message table occupies about 5Kb.  This is particularly
-reasonable for embedded applications where there's no good way to display 
-a message anyway.  To do this, remove the creation of the message table
-(jpeg_std_message_table[]) from jerror.c, and alter format_message to do
-something reasonable without it.  You could output the numeric value of the
-message code number, for example.  If you do this, you can also save a couple
-more K by modifying the TRACEMSn() macros in jerror.h to expand to nothing;
-you don't need trace capability anyway, right?
-
-
-Portability considerations
---------------------------
-
-The JPEG library has been written to be extremely portable; the sample
-applications cjpeg and djpeg are slightly less so.  This section summarizes
-the design goals in this area.  (If you encounter any bugs that cause the
-library to be less portable than is claimed here, we'd appreciate hearing
-about them.)
-
-The code works fine on ANSI C, C++, and pre-ANSI C compilers, using any of
-the popular system include file setups, and some not-so-popular ones too.
-See install.doc for configuration procedures.
-
-The code is not dependent on the exact sizes of the C data types.  As
-distributed, we make the assumptions that
-	char	is at least 8 bits wide
-	short	is at least 16 bits wide
-	int	is at least 16 bits wide
-	long	is at least 32 bits wide
-(These are the minimum requirements of the ANSI C standard.)  Wider types will
-work fine, although memory may be used inefficiently if char is much larger
-than 8 bits or short is much bigger than 16 bits.  The code should work
-equally well with 16- or 32-bit ints.
-
-In a system where these assumptions are not met, you may be able to make the
-code work by modifying the typedefs in jmorecfg.h.  However, you will probably
-have difficulty if int is less than 16 bits wide, since references to plain
-int abound in the code.
-
-char can be either signed or unsigned, although the code runs faster if an
-unsigned char type is available.  If char is wider than 8 bits, you will need
-to redefine JOCTET and/or provide custom data source/destination managers so
-that JOCTET represents exactly 8 bits of data on external storage.
-
-The JPEG library proper does not assume ASCII representation of characters.
-But some of the image file I/O modules in cjpeg/djpeg do have ASCII
-dependencies in file-header manipulation; so does cjpeg's select_file_type()
-routine.
-
-The JPEG library does not rely heavily on the C library.  In particular, C
-stdio is used only by the data source/destination modules and the error
-handler, all of which are application-replaceable.  (cjpeg/djpeg are more
-heavily dependent on stdio.)  malloc and free are called only from the memory
-manager "back end" module, so you can use a different memory allocator by
-replacing that one file.
-
-The code generally assumes that C names must be unique in the first 15
-characters.  However, global function names can be made unique in the
-first 6 characters by defining NEED_SHORT_EXTERNAL_NAMES.
-
-More info about porting the code may be gleaned by reading jconfig.doc,
-jmorecfg.h, and jinclude.h.
-
-
-Notes for MS-DOS implementors
------------------------------
-
-The IJG code is designed to work efficiently in 80x86 "small" or "medium"
-memory models (i.e., data pointers are 16 bits unless explicitly declared
-"far"; code pointers can be either size).  You may be able to use small
-model to compile cjpeg or djpeg by itself, but you will probably have to use
-medium model for any larger application.  This won't make much difference in
-performance.  You *will* take a noticeable performance hit if you use a
-large-data memory model (perhaps 10%-25%), and you should avoid "huge" model
-if at all possible.
-
-The JPEG library typically needs 2Kb-3Kb of stack space.  It will also
-malloc about 20K-30K of near heap space while executing (and lots of far
-heap, but that doesn't count in this calculation).  This figure will vary
-depending on selected operating mode, and to a lesser extent on image size.
-There is also about 5Kb-6Kb of constant data which will be allocated in the
-near data segment (about 4Kb of this is the error message table).
-Thus you have perhaps 20K available for other modules' static data and near
-heap space before you need to go to a larger memory model.  The C library's
-static data will account for several K of this, but that still leaves a good
-deal for your needs.  (If you are tight on space, you could reduce the sizes
-of the I/O buffers allocated by jdatasrc.c and jdatadst.c, say from 4K to
-1K.  Another possibility is to move the error message table to far memory;
-this should be doable with only localized hacking on jerror.c.)
-
-About 2K of the near heap space is "permanent" memory that will not be
-released until you destroy the JPEG object.  This is only an issue if you
-save a JPEG object between compression or decompression operations.
-
-Far data space may also be a tight resource when you are dealing with large
-images.  The most memory-intensive case is decompression with two-pass color
-quantization, or single-pass quantization to an externally supplied color
-map.  This requires a 128Kb color lookup table plus strip buffers amounting
-to about 40 bytes per column for typical sampling ratios (eg, about 25600
-bytes for a 640-pixel-wide image).  You may not be able to process wide
-images if you have large data structures of your own.
-
-Of course, all of these concerns vanish if you use a 32-bit flat-memory-model
-compiler, such as DJGPP or Watcom C.  We highly recommend flat model if you
-can use it; the JPEG library is significantly faster in flat model.

Engine/lib/ljpeg/extras/ltconfig

@@ -1,1512 +0,0 @@
-#! /bin/sh
-
-# ltconfig - Create a system-specific libtool.
-# Copyright (C) 1996-1998 Free Software Foundation, Inc.
-# Gordon Matzigkeit <[email protected]>, 1996
-#
-# This file is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# A lot of this script is taken from autoconf-2.10.
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-if test "${CDPATH+set}" = set; then CDPATH=; export CDPATH; fi
-
-echo=echo
-if test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then :
-else
-  # The Solaris and AIX default echo program unquotes backslashes.
-  # This makes it impossible to quote backslashes using
-  #   echo "$something" | sed 's/\\/\\\\/g'
-  # So, we emulate echo with printf '%s\n'
-  echo="printf %s\\n"
-  if test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then :
-  else
-    # Oops.  We have no working printf.  Try to find a not-so-buggy echo.
-    echo=echo
-    IFS="${IFS= 	}"; save_ifs="$IFS"; IFS="${IFS}:"
-    for dir in $PATH /usr/ucb; do
-      if test -f $dir/echo && test "X`$dir/echo '\t'`" = 'X\t'; then
-        echo="$dir/echo"
-        break
-      fi
-    done
-    IFS="$save_ifs"
-  fi
-fi
-
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='sed -e s/^X//'
-sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'
-
-# Same as above, but do not quote variable references.
-double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'
-
-# The name of this program.
-progname=`$echo "X$0" | $Xsed -e 's%^.*/%%'`
-
-# Constants:
-PROGRAM=ltconfig
-PACKAGE=libtool
-VERSION=1.2
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.c 1>&5'
-ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.c $LIBS 1>&5'
-rm="rm -f"
-
-help="Try \`$progname --help' for more information."
-
-# Global variables:
-can_build_shared=yes
-enable_shared=yes
-# All known linkers require a `.a' archive for static linking.
-enable_static=yes
-ltmain=
-silent=
-srcdir=
-ac_config_guess=
-ac_config_sub=
-host=
-nonopt=
-verify_host=yes
-with_gcc=no
-with_gnu_ld=no
-
-old_AR="$AR"
-old_CC="$CC"
-old_CFLAGS="$CFLAGS"
-old_CPPFLAGS="$CPPFLAGS"
-old_LD="$LD"
-old_LN_S="$LN_S"
-old_NM="$NM"
-old_RANLIB="$RANLIB"
-
-# Parse the command line options.
-args=
-prev=
-for option
-do
-  case "$option" in
-  -*=*) optarg=`echo "$option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) optarg= ;;
-  esac
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$prev"; then
-    eval "$prev=\$option"
-    prev=
-    continue
-  fi
-
-  case "$option" in
-  --help) cat <<EOM
-Usage: $progname [OPTION]... LTMAIN [HOST]
-
-Generate a system-specific libtool script.
-
-    --disable-shared       do not build shared libraries
-    --disable-static       do not build static libraries
-    --help                 display this help and exit
-    --no-verify            do not verify that HOST is a valid host type
-    --quiet                same as \`--silent'
-    --silent               do not print informational messages
-    --srcdir=DIR           find \`config.guess' in DIR
-    --version              output version information and exit
-    --with-gcc             assume that the GNU C compiler will be used
-    --with-gnu-ld          assume that the C compiler uses the GNU linker
-
-LTMAIN is the \`ltmain.sh' shell script fragment that provides basic libtool
-functionality.
-
-HOST is the canonical host system name [default=guessed].
-EOM
-  exit 0
-  ;;
-
-  --disable-shared) enable_shared=no ;;
-
-  --disable-static) enable_static=no ;;
-
-  --quiet | --silent) silent=yes ;;
-
-  --srcdir) prev=srcdir ;;
-  --srcdir=*) srcdir="$optarg" ;;
-
-  --no-verify) verify_host=no ;;
-
-  --version) echo "$PROGRAM (GNU $PACKAGE) $VERSION"; exit 0 ;;
-
-  --with-gcc) with_gcc=yes ;;
-  --with-gnu-ld) with_gnu_ld=yes ;;
-
-  -*)
-    echo "$progname: unrecognized option \`$option'" 1>&2
-    echo "$help" 1>&2
-    exit 1
-    ;;
-
-  *)
-    if test -z "$ltmain"; then
-      ltmain="$option"
-    elif test -z "$host"; then
-# This generates an unnecessary warning for sparc-sun-solaris4.1.3_U1
-#      if test -n "`echo $option| sed 's/[-a-z0-9.]//g'`"; then
-#        echo "$progname: warning \`$option' is not a valid host type" 1>&2
-#      fi
-      host="$option"
-    else
-      echo "$progname: too many arguments" 1>&2
-      echo "$help" 1>&2
-      exit 1
-    fi ;;
-  esac
-done
-
-if test -z "$ltmain"; then
-  echo "$progname: you must specify a LTMAIN file" 1>&2
-  echo "$help" 1>&2
-  exit 1
-fi
-
-if test -f "$ltmain"; then :
-else
-  echo "$progname: \`$ltmain' does not exist" 1>&2
-  echo "$help" 1>&2
-  exit 1
-fi
-
-# Quote any args containing shell metacharacters.
-ltconfig_args=
-for arg
-do
-  case "$arg" in
-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
-  ltconfig_args="$ltconfig_args '$arg'" ;;
-  *) ltconfig_args="$ltconfig_args $arg" ;;
-  esac
-done
-
-# A relevant subset of AC_INIT.
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 5 compiler messages saved in config.log
-# 6 checking for... messages and results
-if test "$silent" = yes; then
-  exec 6>/dev/null
-else
-  exec 6>&1
-fi
-exec 5>>./config.log
-
-# NLS nuisances.
-# Only set LANG and LC_ALL to C if already set.
-# These must not be set unconditionally because not all systems understand
-# e.g. LANG=C (notably SCO).
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
-  # Stardent Vistra SVR4 grep lacks -e, says [email protected].
-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
-    ac_n= ac_c='
-' ac_t='	'
-  else
-    ac_n=-n ac_c= ac_t=
-  fi
-else
-  ac_n= ac_c='\c' ac_t=
-fi
-
-if test -z "$srcdir"; then
-  # Assume the source directory is the same one as the path to ltmain.sh.
-  srcdir=`$echo "$ltmain" | $Xsed -e 's%/[^/]*$%%'`
-  test "$srcdir" = "$ltmain" && srcdir=.
-fi
-
-trap "$rm conftest*; exit 1" 1 2 15
-if test "$verify_host" = yes; then
-  # Check for config.guess and config.sub.
-  ac_aux_dir=
-  for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
-    if test -f $ac_dir/config.guess; then
-      ac_aux_dir=$ac_dir
-      break
-    fi
-  done
-  if test -z "$ac_aux_dir"; then
-    echo "$progname: cannot find config.guess in $srcdir $srcdir/.. $srcdir/../.." 1>&2
-    echo "$help" 1>&2
-    exit 1
-  fi
-  ac_config_guess=$ac_aux_dir/config.guess
-  ac_config_sub=$ac_aux_dir/config.sub
-
-  # Make sure we can run config.sub.
-  if $ac_config_sub sun4 >/dev/null 2>&1; then :
-  else
-    echo "$progname: cannot run $ac_config_sub" 1>&2
-    echo "$help" 1>&2
-    exit 1
-  fi
-
-  echo $ac_n "checking host system type""... $ac_c" 1>&6
-
-  host_alias=$host
-  case "$host_alias" in
-  "")
-    if host_alias=`$ac_config_guess`; then :
-    else
-      echo "$progname: cannot guess host type; you must specify one" 1>&2
-      echo "$help" 1>&2
-      exit 1
-    fi ;;
-  esac
-  host=`$ac_config_sub $host_alias`
-  echo "$ac_t$host" 1>&6
-
-  # Make sure the host verified.
-  test -z "$host" && exit 1
-
-elif test -z "$host"; then
-  echo "$progname: you must specify a host type if you use \`--no-verify'" 1>&2
-  echo "$help" 1>&2
-  exit 1
-else
-  host_alias=$host
-fi
-
-# Transform linux* to *-*-linux-gnu*, to support old configure scripts.
-case "$host_os" in
-linux-gnu*) ;;
-linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'`
-esac
-
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-
-case "$host_os" in
-aix3*)
-  # AIX sometimes has problems with the GCC collect2 program.  For some
-  # reason, if we set the COLLECT_NAMES environment variable, the problems
-  # vanish in a puff of smoke.
-  if test "${COLLECT_NAMES+set}" != set; then
-    COLLECT_NAMES=
-    export COLLECT_NAMES
-  fi
-  ;;
-esac
-
-# Determine commands to create old-style static archives.
-old_archive_cmds='$AR cru $oldlib$oldobjs'
-old_postinstall_cmds='chmod 644 $oldlib'
-old_postuninstall_cmds=
-
-# Set a sane default for `AR'.
-test -z "$AR" && AR=ar
-
-# If RANLIB is not set, then run the test.
-if test "${RANLIB+set}" != "set"; then
-  result=no
-
-  echo $ac_n "checking for ranlib... $ac_c" 1>&6
-  IFS="${IFS= 	}"; save_ifs="$IFS"; IFS="${IFS}:"
-  for dir in $PATH; do
-    test -z "$dir" && dir=.
-    if test -f $dir/ranlib; then
-      RANLIB="ranlib"
-      result="ranlib"
-      break
-    fi
-  done
-  IFS="$save_ifs"
-
-  echo "$ac_t$result" 1>&6
-fi
-
-if test -n "$RANLIB"; then
-  old_archive_cmds="$old_archive_cmds;\$RANLIB \$oldlib"
-  old_postinstall_cmds="\$RANLIB \$oldlib;$old_postinstall_cmds"
-fi
-
-# Check to see if we are using GCC.
-if test "$with_gcc" != yes || test -z "$CC"; then
-  # If CC is not set, then try to find GCC or a usable CC.
-  if test -z "$CC"; then
-    echo $ac_n "checking for gcc... $ac_c" 1>&6
-    IFS="${IFS= 	}"; save_ifs="$IFS"; IFS="${IFS}:"
-    for dir in $PATH; do
-      IFS="$save_ifs"
-      test -z "$dir" && dir=.
-      if test -f $dir/gcc; then
-	CC="gcc"
-	break
-      fi
-    done
-    IFS="$save_ifs"
-
-    if test -n "$CC"; then
-      echo "$ac_t$CC" 1>&6
-    else
-      echo "$ac_t"no 1>&6
-    fi
-  fi
-
-  # Not "gcc", so try "cc", rejecting "/usr/ucb/cc".
-  if test -z "$CC"; then
-    echo $ac_n "checking for cc... $ac_c" 1>&6
-    IFS="${IFS= 	}"; save_ifs="$IFS"; IFS="${IFS}:"
-    cc_rejected=no
-    for dir in $PATH; do
-      test -z "$dir" && dir=.
-      if test -f $dir/cc; then
-	if test "$dir/cc" = "/usr/ucb/cc"; then
-	  cc_rejected=yes
-	  continue
-	fi
-	CC="cc"
-	break
-      fi
-    done
-    IFS="$save_ifs"
-    if test $cc_rejected = yes; then
-      # We found a bogon in the path, so make sure we never use it.
-      set dummy $CC
-      shift
-      if test $# -gt 0; then
-	# We chose a different compiler from the bogus one.
-	# However, it has the same name, so the bogon will be chosen
-	# first if we set CC to just the name; use the full file name.
-	shift
-	set dummy "$dir/cc" "$@"
-	shift
-	CC="$@"
-      fi
-    fi
-
-    if test -n "$CC"; then
-      echo "$ac_t$CC" 1>&6
-    else
-      echo "$ac_t"no 1>&6
-    fi
-
-    if test -z "$CC"; then
-      echo "$progname: error: no acceptable cc found in \$PATH" 1>&2
-      exit 1
-    fi
-  fi
-
-  # Now see if the compiler is really GCC.
-  with_gcc=no
-  echo $ac_n "checking whether we are using GNU C... $ac_c" 1>&6
-  echo "$progname:424: checking whether we are using GNU C" >&5
-
-  $rm conftest.c
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-  if { ac_try='${CC-cc} -E conftest.c'; { (eval echo $progname:432: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
-    with_gcc=yes
-  fi
-  $rm conftest.c
-  echo "$ac_t$with_gcc" 1>&6
-fi
-
-# Allow CC to be a program name with arguments.
-set dummy $CC
-compiler="$2"
-
-echo $ac_n "checking for $compiler option to produce PIC... $ac_c" 1>&6
-pic_flag=
-special_shlib_compile_flags=
-wl=
-link_static_flag=
-no_builtin_flag=
-
-if test "$with_gcc" = yes; then
-  wl='-Wl,'
-  link_static_flag='-static'
-  no_builtin_flag=' -fno-builtin'
-
-  case "$host_os" in
-  aix3* | aix4* | irix5* | irix6* | osf3* | osf4*)
-    # PIC is the default for these OSes.
-    ;;
-  os2*)
-    # We can build DLLs from non-PIC.
-    ;;
-  amigaos*)
-    # FIXME: we need at least 68020 code to build shared libraries, but
-    # adding the `-m68020' flag to GCC prevents building anything better,
-    # like `-m68040'.
-    pic_flag='-m68020 -resident32 -malways-restore-a4'
-    ;;
-  *)
-    pic_flag='-fPIC'
-    ;;
-  esac
-else
-  # PORTME Check for PIC flags for the system compiler.
-  case "$host_os" in
-  aix3* | aix4*)
-    # All AIX code is PIC.
-    link_static_flag='-bnso -bI:/lib/syscalls.exp'
-    ;;
-
-  hpux9* | hpux10*)
-    # Is there a better link_static_flag that works with the bundled CC?
-    wl='-Wl,'
-    link_static_flag="${wl}-a ${wl}archive"
-    pic_flag='+Z'
-    ;;
-
-  irix5* | irix6*)
-    wl='-Wl,'
-    link_static_flag='-non_shared'
-    # PIC (with -KPIC) is the default.
-    ;;
-
-  os2*)
-    # We can build DLLs from non-PIC.
-    ;;
-
-  osf3* | osf4*)
-    # All OSF/1 code is PIC.
-    wl='-Wl,'
-    link_static_flag='-non_shared'
-    ;;
-
-  sco3.2v5*)
-    pic_flag='-Kpic'
-    link_static_flag='-dn'
-    special_shlib_compile_flags='-belf'
-    ;;
-
-  solaris2*)
-    pic_flag='-KPIC'
-    link_static_flag='-Bstatic'
-    wl='-Wl,'
-    ;;
-
-  sunos4*)
-    pic_flag='-PIC'
-    link_static_flag='-Bstatic'
-    wl='-Qoption ld '
-    ;;
-
-  sysv4.2uw2*)
-    pic_flag='-KPIC'
-    link_static_flag='-Bstatic'
-    wl='-Wl,'
-    ;;
-
-  uts4*)
-    pic_flag='-pic'
-    link_static_flag='-Bstatic'
-    ;;
-
-  *)
-    can_build_shared=no
-    ;;
-  esac
-fi
-
-if test -n "$pic_flag"; then
-  echo "$ac_t$pic_flag" 1>&6
-
-  # Check to make sure the pic_flag actually works.
-  echo $ac_n "checking if $compiler PIC flag $pic_flag works... $ac_c" 1>&6
-  $rm conftest*
-  echo > conftest.c
-  save_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS $pic_flag -DPIC"
-  echo "$progname:547: checking if $compiler PIC flag $pic_flag works" >&5
-  if { (eval echo $progname:548: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.o; then
-    # Append any warnings to the config.log.
-    cat conftest.err 1>&5
-
-    # On HP-UX, both CC and GCC only warn that PIC is supported... then they
-    # create non-PIC objects.  So, if there were any warnings, we assume that
-    # PIC is not supported.
-    if test -s conftest.err; then
-      echo "$ac_t"no 1>&6
-      can_build_shared=no
-      pic_flag=
-    else
-      echo "$ac_t"yes 1>&6
-      pic_flag=" $pic_flag"
-    fi
-  else
-    # Append any errors to the config.log.
-    cat conftest.err 1>&5
-    can_build_shared=no
-    pic_flag=
-    echo "$ac_t"no 1>&6
-  fi
-  CFLAGS="$save_CFLAGS"
-  $rm conftest*
-else
-  echo "$ac_t"none 1>&6
-fi
-
-# Check for any special shared library compilation flags.
-if test -n "$special_shlib_compile_flags"; then
-  echo "$progname: warning: \`$CC' requires \`$special_shlib_compile_flags' to build shared libraries" 1>&2
-  if echo "$old_CC $old_CFLAGS " | egrep -e "[ 	]$special_shlib_compile_flags[ 	]" >/dev/null; then :
-  else
-    echo "$progname: add \`$special_shlib_compile_flags' to the CC or CFLAGS env variable and reconfigure" 1>&2
-    can_build_shared=no
-  fi
-fi
-
-echo $ac_n "checking if $compiler static flag $link_static_flag works... $ac_c" 1>&6
-$rm conftest*
-echo 'main(){return(0);}' > conftest.c
-save_LDFLAGS="$LDFLAGS"
-LDFLAGS="$LDFLAGS $link_static_flag"
-echo "$progname:591: checking if $compiler static flag $link_static_flag works" >&5
-if { (eval echo $progname:592: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
-  echo "$ac_t$link_static_flag" 1>&6
-else
-  echo "$ac_t"none 1>&6
-  link_static_flag=
-fi
-LDFLAGS="$save_LDFLAGS"
-$rm conftest*
-
-if test -z "$LN_S"; then
-  # Check to see if we can use ln -s, or we need hard links.
-  echo $ac_n "checking whether ln -s works... $ac_c" 1>&6
-  $rm conftestdata
-  if ln -s X conftestdata 2>/dev/null; then
-    $rm conftestdata
-    LN_S="ln -s"
-  else
-    LN_S=ln
-  fi
-  if test "$LN_S" = "ln -s"; then
-    echo "$ac_t"yes 1>&6
-  else
-    echo "$ac_t"no 1>&6
-  fi
-fi
-
-# Make sure LD is an absolute path.
-if test -z "$LD"; then
-  ac_prog=ld
-  if test "$with_gcc" = yes; then
-    # Check if gcc -print-prog-name=ld gives a path.
-    echo $ac_n "checking for ld used by GCC... $ac_c" 1>&6
-    echo "$progname:624: checking for ld used by GCC" >&5
-    ac_prog=`($CC -print-prog-name=ld) 2>&5`
-    case "$ac_prog" in
-    # Accept absolute paths.
-    /* | [A-Za-z]:\\*)
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-    "")
-      # If it fails, then pretend we are not using GCC.
-      ac_prog=ld
-      ;;
-    *)
-      # If it is relative, then search for the first ld in PATH.
-      with_gnu_ld=unknown
-      ;;
-    esac
-  elif test "$with_gnu_ld" = yes; then
-    echo $ac_n "checking for GNU ld... $ac_c" 1>&6
-    echo "$progname:642: checking for GNU ld" >&5
-  else
-    echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-    echo "$progname:645: checking for non-GNU ld" >&5
-  fi
-
-  if test -z "$LD"; then
-    IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
-    for ac_dir in $PATH; do
-      test -z "$ac_dir" && ac_dir=.
-      if test -f "$ac_dir/$ac_prog"; then
-	LD="$ac_dir/$ac_prog"
-	# Check to see if the program is GNU ld.  I'd rather use --version,
-	# but apparently some GNU ld's only accept -v.
-	# Break only if it was the GNU/non-GNU ld that we prefer.
-	if "$LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
-	  test "$with_gnu_ld" != no && break
-	else
-	  test "$with_gnu_ld" != yes && break
-	fi
-      fi
-    done
-    IFS="$ac_save_ifs"
-  fi
-
-  if test -n "$LD"; then
-    echo "$ac_t$LD" 1>&6
-  else
-    echo "$ac_t"no 1>&6
-  fi
-
-  if test -z "$LD"; then
-    echo "$progname: error: no acceptable ld found in \$PATH" 1>&2
-    exit 1
-  fi
-fi
-
-# Check to see if it really is or is not GNU ld.
-echo $ac_n "checking if the linker ($LD) is GNU ld... $ac_c" 1>&6
-# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
-  with_gnu_ld=yes
-else
-  with_gnu_ld=no
-fi
-echo "$ac_t$with_gnu_ld" 1>&6
-
-# See if the linker supports building shared libraries.
-echo $ac_n "checking whether the linker ($LD) supports shared libraries... $ac_c" 1>&6
-
-allow_undefined_flag=
-no_undefined_flag=
-archive_cmds=
-old_archive_from_new_cmds=
-export_dynamic_flag_spec=
-hardcode_libdir_flag_spec=
-hardcode_libdir_separator=
-hardcode_direct=no
-hardcode_minus_L=no
-hardcode_shlibpath_var=unsupported
-runpath_var=
-
-case "$host_os" in
-amigaos* | sunos4*)
-  # On these operating systems, we should treat GNU ld like the system ld.
-  gnu_ld_acts_native=yes
-  ;;
-*)
-  gnu_ld_acts_native=no
-  ;;
-esac
-
-ld_shlibs=yes
-if test "$with_gnu_ld" = yes && test "$gnu_ld_acts_native" != yes; then
-
-  # See if GNU ld supports shared libraries.
-  if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
-    archive_cmds='$CC -shared ${wl}-soname $wl$soname -o $lib$libobjs'
-    runpath_var=LD_RUN_PATH
-    ld_shlibs=yes
-  else
-    ld_shlibs=no
-  fi
-
-  if test "$ld_shlibs" = yes; then
-    hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
-    export_dynamic_flag_spec='${wl}--export-dynamic'
-  fi
-else
-  # PORTME fill in a description of your system's linker (not GNU ld)
-  case "$host_os" in
-  aix3*)
-    allow_undefined_flag=unsupported
-    archive_cmds='$NM$libobjs | $global_symbol_pipe | sed '\''s/.* //'\'' > $lib.exp;$LD -o $objdir/$soname$libobjs -bE:$lib.exp -T512 -H512 -bM:SRE;$AR cru $lib $objdir/$soname'
-    # Note: this linker hardcodes the directories in LIBPATH if there
-    # are no directories specified by -L.
-    hardcode_minus_L=yes
-    if test "$with_gcc" = yes && test -z "$link_static_flag"; then
-      # Neither direct hardcoding nor static linking is supported with a
-      # broken collect2.
-      hardcode_direct=unsupported
-    fi
-    ;;
-
-  aix4*)
-    allow_undefined_flag=unsupported
-    archive_cmds='$NM$libobjs | $global_symbol_pipe | sed '\''s/.* //'\'' > $lib.exp;$CC -o $objdir/$soname$libobjs ${wl}-bE:$lib.exp ${wl}-bM:SRE ${wl}-bnoentry;$AR cru $lib $objdir/$soname'
-    hardcode_direct=yes
-    hardcode_minus_L=yes
-    ;;
-
-  amigaos*)
-    archive_cmds='$rm $objdir/a2ixlibrary.data;$echo "#define NAME $libname" > $objdir/a2ixlibrary.data;$echo "#define LIBRARY_ID 1" >> $objdir/a2ixlibrary.data;$echo "#define VERSION $major" >> $objdir/a2ixlibrary.data;$echo "#define REVISION $revision" >> $objdir/a2ixlibrary.data;$AR cru $lib$libobjs;$RANLIB $lib;(cd $objdir && a2ixlibrary -32)'
-    hardcode_libdir_flag_spec='-L$libdir'
-    hardcode_minus_L=yes
-    ;;
-
-  # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-  # support.  Future versions do this automatically, but an explicit c++rt0.o
-  # does not break anything, and helps significantly (at the cost of a little
-  # extra space).
-  freebsd2.2*)
-    archive_cmds='$LD -Bshareable -o $lib$libobjs /usr/lib/c++rt0.o'
-    hardcode_libdir_flag_spec='-R$libdir'
-    hardcode_direct=yes
-    hardcode_minus_L=yes
-    hardcode_shlibpath_var=no
-    ;;
-
-  # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-  freebsd2*)
-    archive_cmds='$LD -Bshareable -o $lib$libobjs'
-    hardcode_direct=yes
-    hardcode_minus_L=yes
-    hardcode_shlibpath_var=no
-    ;;
-
-  # FreeBSD 3, at last, uses gcc -shared to do shared libraries.
-  freebsd3*)
-    archive_cmds='$CC -shared -o $lib$libobjs'
-    hardcode_libdir_flag_spec='-R$libdir'
-    hardcode_direct=yes
-    hardcode_minus_L=yes
-    hardcode_shlibpath_var=no
-    ;;
-
-  hpux9*)
-    archive_cmds='$rm $objdir/$soname;$LD -b +s +b $install_libdir -o $objdir/$soname$libobjs;mv $objdir/$soname $lib'
-    hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-    hardcode_direct=yes
-    hardcode_minus_L=yes
-    export_dynamic_flag_spec='${wl}-E'
-    ;;
-
-  hpux10*)
-    archive_cmds='$LD -b +h $soname +s +b $install_libdir -o $lib$libobjs'
-    hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-    hardcode_direct=yes
-    hardcode_minus_L=yes
-    export_dynamic_flag_spec='${wl}-E'
-    ;;
-
-  irix5* | irix6*)
-    archive_cmds='$LD -shared -o $lib -soname $soname -set_version $verstring$libobjs'
-    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-    ;;
-
-  netbsd*)
-    # Tested with NetBSD 1.2 ld
-    archive_cmds='$LD -Bshareable -o $lib$libobjs'
-    hardcode_libdir_flag_spec='-R$libdir'
-    hardcode_direct=yes
-    hardcode_shlibpath_var=no
-    ;;
-
-  openbsd*)
-    archive_cmds='$LD -Bshareable -o $lib$libobjs'
-    hardcode_libdir_flag_spec='-R$libdir'
-    hardcode_direct=yes
-    hardcode_shlibpath_var=no
-    ;;
-
-  os2*)
-    hardcode_libdir_flag_spec='-L$libdir'
-    hardcode_minus_L=yes
-    allow_undefined_flag=unsupported
-    archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $objdir/$libname.def;$echo "DESCRIPTION \"$libname\"" >> $objdir/$libname.def;$echo DATA >> $objdir/$libname.def;$echo " SINGLE NONSHARED" >> $objdir/$libname.def;$echo EXPORTS >> $objdir/$libname.def;emxexp$libobjs >> $objdir/$libname.def;$CC -Zdll -Zcrtdll -o $lib$libobjs $objdir/$libname.def'
-    old_archive_from_new_cmds='emximp -o $objdir/$libname.a $objdir/$libname.def'
-    ;;
-
-  osf3* | osf4*)
-    allow_undefined_flag=' -expect_unresolved \*'
-    archive_cmds='$LD -shared${allow_undefined_flag} -o $lib -soname $soname -set_version $verstring$libobjs$deplibs'
-    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-    hardcode_libdir_separator=:
-    ;;
-
-  sco3.2v5*)
-    archive_cmds='$LD -G -o $lib$libobjs'
-    hardcode_direct=yes
-    ;;
-
-  solaris2*)
-    no_undefined_flag=' -z text'
-    archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib$libobjs'
-    hardcode_libdir_flag_spec='-R$libdir'
-    hardcode_shlibpath_var=no
-
-    # Solaris 2 before 2.5 hardcodes -L paths.
-    case "$host_os" in
-    solaris2.[0-4]*)
-      hardcode_minus_L=yes
-      ;;
-    esac
-    ;;
-
-  sunos4*)
-    if test "$with_gcc" = yes; then
-      archive_cmds='$CC -shared -o $lib$libobjs'
-    else
-      archive_cmds='$LD -assert pure-text -Bstatic -o $lib$libobjs'
-    fi
-
-    if test "$with_gnu_ld" = yes; then
-      export_dynamic_flag_spec='${wl}-export-dynamic'
-    fi
-    hardcode_libdir_flag_spec='-L$libdir'
-    hardcode_direct=yes
-    hardcode_minus_L=yes
-    hardcode_shlibpath_var=no
-    ;;
-
-  uts4*)
-    archive_cmds='$LD -G -h $soname -o $lib$libobjs'
-    hardcode_libdir_flag_spec='-L$libdir'
-    hardcode_direct=no
-    hardcode_minus_L=no
-    hardcode_shlibpath_var=no
-    ;;
-
-  *)
-    ld_shlibs=no
-    can_build_shared=no
-    ;;
-  esac
-fi
-echo "$ac_t$ld_shlibs" 1>&6
-
-if test -z "$NM"; then
-  echo $ac_n "checking for BSD-compatible nm... $ac_c" 1>&6
-  case "$NM" in
-  /* | [A-Za-z]:\\*) ;; # Let the user override the test with a path.
-  *)
-    IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
-    for ac_dir in /usr/ucb /usr/ccs/bin $PATH /bin; do
-      test -z "$ac_dir" && ac_dir=.
-      if test -f $ac_dir/nm; then
-        # Check to see if the nm accepts a BSD-compat flag.
-        # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-        #   nm: unknown option "B" ignored
-        if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-          NM="$ac_dir/nm -B"
-        elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-          NM="$ac_dir/nm -p"
-	else
-          NM="$ac_dir/nm"
-	fi
-        break
-      fi
-    done
-    IFS="$ac_save_ifs"
-    test -z "$NM" && NM=nm
-    ;;
-  esac
-  echo "$ac_t$NM" 1>&6
-fi
-
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-echo $ac_n "checking command to parse $NM output... $ac_c" 1>&6
-
-# These are sane defaults that work on at least a few old systems.
-# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
-
-# Character class describing NM global symbol codes.
-symcode='[BCDEGRSTU]'
-
-# Regexp to match symbols that can be accessed directly from C.
-sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
-
-# Transform the above into a raw symbol and a C symbol.
-symxfrm='\1 \1'
-
-# Define system-specific variables.
-case "$host_os" in
-aix*)
-  symcode='[BCDTU]'
-  ;;
-irix*)
-  # Cannot use undefined symbols on IRIX because inlined functions mess us up.
-  symcode='[BCDEGRST]'
-  ;;
-solaris2*)
-  symcode='[BDTU]'
-  ;;
-esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
-  symcode='[ABCDGISTUW]'
-fi
-
-# Write the raw and C identifiers.
-global_symbol_pipe="sed -n -e 's/^.* $symcode $sympat$/$symxfrm/p'"
-
-# Check to see that the pipe works correctly.
-pipe_works=no
-$rm conftest*
-cat > conftest.c <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-main(){nm_test_var='a';nm_test_func();return(0);}
-EOF
-
-echo "$progname:971: checking if global_symbol_pipe works" >&5
-if { (eval echo $progname:972: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; } && test -s conftest.o; then
-  # Now try to grab the symbols.
-  nlist=conftest.nm
-  if { echo "$progname:975: eval \"$NM conftest.o | $global_symbol_pipe > $nlist\"" >&5; eval "$NM conftest.o | $global_symbol_pipe > $nlist 2>&5"; } && test -s "$nlist"; then
-
-    # Try sorting and uniquifying the output.
-    if sort "$nlist" | uniq > "$nlist"T; then
-      mv -f "$nlist"T "$nlist"
-      wcout=`wc "$nlist" 2>/dev/null`
-      count=`$echo "X$wcout" | $Xsed -e 's/^[ 	]*\([0-9][0-9]*\).*$/\1/'`
-      (test "$count" -ge 0) 2>/dev/null || count=-1
-    else
-      rm -f "$nlist"T
-      count=-1
-    fi
-
-    # Make sure that we snagged all the symbols we need.
-    if egrep ' nm_test_var$' "$nlist" >/dev/null; then
-      if egrep ' nm_test_func$' "$nlist" >/dev/null; then
-	cat <<EOF > conftest.c
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-EOF
-        # Now generate the symbol file.
-        sed 's/^.* \(.*\)$/extern char \1;/' < "$nlist" >> conftest.c
-
-	cat <<EOF >> conftest.c
-#if defined (__STDC__) && __STDC__
-# define __ptr_t void *
-#else
-# define __ptr_t char *
-#endif
-
-/* The number of symbols in dld_preloaded_symbols, -1 if unsorted. */
-int dld_preloaded_symbol_count = $count;
-
-/* The mapping between symbol names and symbols. */
-struct {
-  char *name;
-  __ptr_t address;
-}
-dld_preloaded_symbols[] =
-{
-EOF
-        sed 's/^\(.*\) \(.*\)$/  {"\1", (__ptr_t) \&\2},/' < "$nlist" >> conftest.c
-        cat <<\EOF >> conftest.c
-  {0, (__ptr_t) 0}
-};
-
-#ifdef __cplusplus
-}
-#endif
-EOF
-        # Now try linking the two files.
-        mv conftest.o conftestm.o
-	save_LIBS="$LIBS"
-	save_CFLAGS="$CFLAGS"
-        LIBS='conftestm.o'
-	CFLAGS="$CFLAGS$no_builtin_flag"
-        if { (eval echo $progname:1033: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
-          pipe_works=yes
-        else
-          echo "$progname: failed program was:" >&5
-          cat conftest.c >&5
-        fi
-        LIBS="$save_LIBS"
-      else
-        echo "cannot find nm_test_func in $nlist" >&5
-      fi
-    else
-      echo "cannot find nm_test_var in $nlist" >&5
-    fi
-  else
-    echo "cannot run $global_symbol_pipe" >&5
-  fi
-else
-  echo "$progname: failed program was:" >&5
-  cat conftest.c >&5
-fi
-$rm conftest*
-
-# Do not use the global_symbol_pipe unless it works.
-echo "$ac_t$pipe_works" 1>&6
-test "$pipe_works" = yes || global_symbol_pipe=
-
-# Check hardcoding attributes.
-echo $ac_n "checking how to hardcode library paths into programs... $ac_c" 1>&6
-hardcode_action=
-if test -n "$hardcode_libdir_flag_spec" || \
-   test -n "$runpath_var"; then
-
-  # We can hardcode non-existant directories.
-  if test "$hardcode_direct" != no && \
-     test "$hardcode_minus_L" != no && \
-     test "$hardcode_shlibpath_var" != no; then
-
-    # Linking always hardcodes the temporary library directory.
-    hardcode_action=relink
-  else
-    # We can link without hardcoding, and we can hardcode nonexisting dirs.
-    hardcode_action=immediate
-  fi
-elif test "$hardcode_direct" != yes && \
-     test "$hardcode_minus_L" != yes && \
-     test "$hardcode_shlibpath_var" != yes; then
-  # We cannot hardcode anything.
-  hardcode_action=unsupported
-else
-  # We can only hardcode existing directories.
-  hardcode_action=relink
-fi
-echo "$ac_t$hardcode_action" 1>&6
-test "$hardcode_action" = unsupported && can_build_shared=no
-
-
-reload_flag=
-reload_cmds='$LD$reload_flag -o $output$reload_objs'
-echo $ac_n "checking for $LD option to reload object files... $ac_c" 1>&6
-# PORTME Some linker may need a different reload flag.
-reload_flag='-r'
-echo "$ac_t$reload_flag"
-test -n "$reload_flag" && reload_flag=" $reload_flag"
-
-# PORTME Fill in your ld.so characteristics
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-version_type=none
-dynamic_linker="$host_os ld.so"
-
-echo $ac_n "checking dynamic linker characteristics... $ac_c" 1>&6
-case "$host_os" in
-aix3* | aix4*)
-  version_type=linux
-  library_names_spec='${libname}${release}.so.$versuffix $libname.a'
-  shlibpath_var=LIBPATH
-
-  # AIX has no versioning support, so we append a major version to the name.
-  soname_spec='${libname}${release}.so.$major'
-  ;;
-
-amigaos*)
-  library_names_spec='$libname.ixlibrary $libname.a'
-  # Create ${libname}_ixlibrary.a entries in /sys/libs.
-  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
-  ;;
-
-freebsd2* | freebsd3*)
-  version_type=sunos
-  library_names_spec='${libname}${release}.so.$versuffix $libname.so'
-  finish_cmds='PATH="$PATH:/sbin" ldconfig -m $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-gnu*)
-  version_type=sunos
-  library_names_spec='${libname}${release}.so.$versuffix'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-hpux9* | hpux10*)
-  # Give a soname corresponding to the major version so that dld.sl refuses to
-  # link against other versions.
-  dynamic_linker="$host_os dld.sl"
-  version_type=sunos
-  shlibpath_var=SHLIB_PATH
-  library_names_spec='${libname}${release}.sl.$versuffix ${libname}${release}.sl.$major $libname.sl'
-  soname_spec='${libname}${release}.sl.$major'
-  # HP-UX runs *really* slowly unless shared libraries are mode 555.
-  postinstall_cmds='chmod 555 $lib'
-  ;;
-
-irix5* | irix6*)
-  version_type=osf
-  soname_spec='${libname}${release}.so'
-  library_names_spec='${libname}${release}.so.$versuffix $libname.so'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-# No shared lib support for Linux oldld, aout, or coff.
-linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*)
-  dynamic_linker=no
-  ;;
-
-# This must be Linux ELF.
-linux-gnu*)
-  version_type=linux
-  library_names_spec='${libname}${release}.so.$versuffix ${libname}${release}.so.$major $libname.so'
-  soname_spec='${libname}${release}.so.$major'
-  finish_cmds='PATH="$PATH:/sbin" ldconfig -n $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-
-  if test -f /lib/ld.so.1; then
-    dynamic_linker='GNU ld.so'
-  else
-    # Only the GNU ld.so supports shared libraries on MkLinux.
-    case "$host_cpu" in
-    powerpc*) dynamic_linker=no ;;
-    *) dynamic_linker='Linux ld.so' ;;
-    esac
-  fi
-  ;;
-
-netbsd* | openbsd*)
-  version_type=sunos
-  library_names_spec='${libname}${release}.so.$versuffix'
-  finish_cmds='PATH="$PATH:/sbin" ldconfig -m $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-os2*)
-  libname_spec='$name'
-  library_names_spec='$libname.dll $libname.a'
-  dynamic_linker='OS/2 ld.exe'
-  shlibpath_var=LIBPATH
-  ;;
-
-osf3* | osf4*)
-  version_type=osf
-  soname_spec='${libname}${release}.so'
-  library_names_spec='${libname}${release}.so.$versuffix $libname.so'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-sco3.2v5*)
-  version_type=osf
-  soname_spec='${libname}${release}.so.$major'
-  library_names_spec='${libname}${release}.so.$versuffix ${libname}${release}.so.$major $libname.so'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-solaris2*)
-  version_type=linux
-  library_names_spec='${libname}${release}.so.$versuffix ${libname}${release}.so.$major $libname.so'
-  soname_spec='${libname}${release}.so.$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-sunos4*)
-  version_type=sunos
-  library_names_spec='${libname}${release}.so.$versuffix'
-  finish_cmds='PATH="$PATH:/usr/etc" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-sysv4.2uw2*)
-  version_type=linux
-  library_names_spec='${libname}${release}.so.$versuffix ${libname}${release}.so.$major $libname.so'
-  soname_spec='${libname}${release}.so.$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-uts4*)
-  version_type=linux
-  library_names_spec='${libname}${release}.so.$versuffix ${libname}${release}.so.$major $libname.so'
-  soname_spec='${libname}${release}.so.$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-*)
-  dynamic_linker=no
-  ;;
-esac
-echo "$ac_t$dynamic_linker"
-test "$dynamic_linker" = no && can_build_shared=no
-
-# Report the final consequences.
-echo "checking if libtool supports shared libraries... $can_build_shared" 1>&6
-
-echo $ac_n "checking whether to build shared libraries... $ac_c" 1>&6
-test "$can_build_shared" = "no" && enable_shared=no
-
-# On AIX, shared libraries and static libraries use the same namespace, and
-# are all built from PIC.
-case "$host_os" in
-aix*)
-  test "$enable_shared" = yes && enable_static=no
-  if test -n "$RANLIB"; then
-    archive_cmds="$archive_cmds;\$RANLIB \$lib"
-    postinstall_cmds='$RANLIB $lib'
-  fi
-  ;;
-esac
-
-echo "$ac_t$enable_shared" 1>&6
-
-# Make sure either enable_shared or enable_static is yes.
-test "$enable_shared" = yes || enable_static=yes
-
-echo "checking whether to build static libraries... $enable_static" 1>&6
-
-echo $ac_n "checking for objdir... $ac_c" 1>&6
-rm -f .libs 2>/dev/null
-mkdir .libs 2>/dev/null
-if test -d .libs; then
-  objdir=.libs
-else
-  # MS-DOS does not allow filenames that begin with a dot.
-  objdir=_libs
-fi
-rmdir .libs 2>/dev/null
-echo "$ac_t$objdir" 1>&6
-
-# Copy echo and quote the copy, instead of the original, because it is
-# used later.
-ltecho="$echo"
-
-# Now quote all the things that may contain metacharacters.
-for var in ltecho old_CC old_CFLAGS old_CPPFLAGS old_LD old_NM old_RANLIB \
-  old_LN_S AR CC LD LN_S NM reload_flag reload_cmds wl pic_flag \
-  link_static_flag no_builtin_flag export_dynamic_flag_spec \
-  libname_spec library_names_spec soname_spec RANLIB \
-  old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \
-  old_postuninstall_cmds archive_cmds postinstall_cmds postuninstall_cmds \
-  allow_undefined_flag no_undefined_flag \
-  finish_cmds finish_eval global_symbol_pipe \
-  hardcode_libdir_flag_spec hardcode_libdir_separator; do
-
-  case "$var" in
-  reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \
-  old_postinstall_cmds | old_postuninstall_cmds | archive_cmds | \
-  postinstall_cmds | postuninstall_cmds | finish_cmds)
-    # Double-quote double-evaled strings.
-    eval "$var=\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\"\`"
-    ;;
-  *)
-    eval "$var=\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`"
-    ;;
-  esac
-done
-
-ofile=libtool
-trap "$rm $ofile; exit 1" 1 2 15
-echo creating $ofile
-$rm $ofile
-cat <<EOF > $ofile
-#! /bin/sh
-
-# libtool - Provide generalized library-building support services.
-# Generated automatically by $PROGRAM - GNU $PACKAGE $VERSION
-# NOTE: Changes made to this file will be lost: look at ltconfig or ltmain.sh.
-#
-# Copyright (C) 1996-1998 Free Software Foundation, Inc.
-# Gordon Matzigkeit <[email protected]>, 1996
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# This program was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# CC="$old_CC" CFLAGS="$old_CFLAGS" CPPFLAGS="$old_CPPFLAGS" \\
-# LD="$old_LD" NM="$old_NM" RANLIB="$old_RANLIB" LN_S="$old_LN_S" \\
-#   $0$ltconfig_args
-#
-# Compiler and other test output produced by $progname, useful for
-# debugging $progname, is in ./config.log if it exists.
-
-# Sed that helps us avoid accidentally triggering echo(1) options like -n.
-Xsed="sed -e s/^X//"
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-if test "\${CDPATH+set}" = set; then CDPATH=; export CDPATH; fi
-
-# An echo program that does not interpret backslashes.
-echo="$ltecho"
-
-# The version of $progname that generated this script.
-LTCONFIG_VERSION="$VERSION"
-
-# Shell to use when invoking shell scripts.
-SHELL=${CONFIG_SHELL-/bin/sh}
-
-# Whether or not to build libtool libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build old-style libraries.
-build_old_libs=$enable_static
-
-# The host system.
-host_alias="$host_alias"
-host="$host"
-
-# The archiver.
-AR="$AR"
-
-# The default C compiler.
-CC="$CC"
-
-# The linker used to build libraries.
-LD="$LD"
-
-# Whether we need hard or soft links.
-LN_S="$LN_S"
-
-# A BSD-compatible nm program.
-NM="$NM"
-
-# The name of the directory that contains temporary libtool files.
-objdir="$objdir"
-
-# How to create reloadable object files.
-reload_flag="$reload_flag"
-reload_cmds="$reload_cmds"
-
-# How to pass a linker flag through the compiler.
-wl="$wl"
-
-# Additional compiler flags for building library objects.
-pic_flag="$pic_flag"
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag="$link_static_flag"
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag="$no_builtin_flag"
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec="$export_dynamic_flag_spec"
-
-# Library versioning type.
-version_type=$version_type
-
-# Format of library name prefix.
-libname_spec="$libname_spec"
-
-# List of archive names.  First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec="$library_names_spec"
-
-# The coded name of the library, if different from the real name.
-soname_spec="$soname_spec"
-
-# Commands used to build and install an old-style archive.
-RANLIB="$RANLIB"
-old_archive_cmds="$old_archive_cmds"
-old_postinstall_cmds="$old_postinstall_cmds"
-old_postuninstall_cmds="$old_postuninstall_cmds"
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds="$old_archive_from_new_cmds"
-
-# Commands used to build and install a shared archive.
-archive_cmds="$archive_cmds"
-postinstall_cmds="$postinstall_cmds"
-postuninstall_cmds="$postuninstall_cmds"
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag="$allow_undefined_flag"
-
-# Flag that forces no undefined symbols.
-no_undefined_flag="$no_undefined_flag"
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds="$finish_cmds"
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval="$finish_eval"
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe="$global_symbol_pipe"
-
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
-
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec="$hardcode_libdir_flag_spec"
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator="$hardcode_libdir_separator"
-
-# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$hardcode_direct
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$hardcode_minus_L
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var
-
-EOF
-
-case "$host_os" in
-aix3*)
-  cat <<\EOF >> $ofile
-# AIX sometimes has problems with the GCC collect2 program.  For some
-# reason, if we set the COLLECT_NAMES environment variable, the problems
-# vanish in a puff of smoke.
-if test "${COLLECT_NAMES+set}" != set; then
-  COLLECT_NAMES=
-  export COLLECT_NAMES
-fi
-
-EOF
-  ;;
-esac
-
-# Append the ltmain.sh script.
-cat "$ltmain" >> $ofile || (rm -f $ofile; exit 1)
-
-chmod +x $ofile
-exit 0
-
-# Local Variables:
-# mode:shell-script
-# sh-indentation:2
-# End:

Engine/lib/ljpeg/extras/ltmain.sh

@@ -1,2453 +0,0 @@
-# ltmain.sh - Provide generalized library-building support services.
-# NOTE: Changing this file will not affect anything until you rerun ltconfig.
-#
-# Copyright (C) 1996-1998 Free Software Foundation, Inc.
-# Gordon Matzigkeit <[email protected]>, 1996
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# The name of this program.
-progname=`$echo "$0" | sed 's%^.*/%%'`
-modename="$progname"
-
-# Constants.
-PROGRAM=ltmain.sh
-PACKAGE=libtool
-VERSION=1.2
-
-default_mode=
-help="Try \`$progname --help' for more information."
-magic="%%%MAGIC variable%%%"
-mkdir="mkdir"
-mv="mv -f"
-rm="rm -f"
-
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='sed -e s/^X//'
-sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
-
-# NLS nuisances.
-# Only set LANG and LC_ALL to C if already set.
-# These must not be set unconditionally because not all systems understand
-# e.g. LANG=C (notably SCO).
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
-
-if test "$LTCONFIG_VERSION" != "$VERSION"; then
-  echo "$modename: ltconfig version \`$LTCONFIG_VERSION' does not match $PROGRAM version \`$VERSION'" 1>&2
-  echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
-  exit 1
-fi
-
-if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
-  echo "$modename: not configured to build any kind of library" 1>&2
-  echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
-  exit 1
-fi
-
-# Global variables.
-mode=$default_mode
-nonopt=
-prev=
-prevopt=
-run=
-show="$echo"
-show_help=
-execute_dlfiles=
-
-# Parse our command line options once, thoroughly.
-while test $# -gt 0
-do
-  arg="$1"
-  shift
-
-  case "$arg" in
-  -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) optarg= ;;
-  esac
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$prev"; then
-    case "$prev" in
-    execute_dlfiles)
-      eval "$prev=\"\$$prev \$arg\""
-      ;;
-    *)
-      eval "$prev=\$arg"
-      ;;
-    esac
-
-    prev=
-    prevopt=
-    continue
-  fi
-
-  # Have we seen a non-optional argument yet?
-  case "$arg" in
-  --help)
-    show_help=yes
-    ;;
-
-  --version)
-    echo "$PROGRAM (GNU $PACKAGE) $VERSION"
-    exit 0
-    ;;
-
-  --dry-run | -n)
-    run=:
-    ;;
-
-  --features)
-    echo "host: $host"
-    if test "$build_libtool_libs" = yes; then
-      echo "enable shared libraries"
-    else
-      echo "disable shared libraries"
-    fi
-    if test "$build_old_libs" = yes; then
-      echo "enable static libraries"
-    else
-      echo "disable static libraries"
-    fi
-    exit 0
-    ;;
-
-  --finish) mode="finish" ;;
-
-  --mode) prevopt="--mode" prev=mode ;;
-  --mode=*) mode="$optarg" ;;
-
-  --quiet | --silent)
-    show=:
-    ;;
-
-  -dlopen)
-    prevopt="-dlopen"
-    prev=execute_dlfiles
-    ;;
-
-  -*)
-    $echo "$modename: unrecognized option \`$arg'" 1>&2
-    $echo "$help" 1>&2
-    exit 1
-    ;;
-
-  *)
-    nonopt="$arg"
-    break
-    ;;
-  esac
-done
-
-if test -n "$prevopt"; then
-  $echo "$modename: option \`$prevopt' requires an argument" 1>&2
-  $echo "$help" 1>&2
-  exit 1
-fi
-
-if test -z "$show_help"; then
-
-  # Infer the operation mode.
-  if test -z "$mode"; then
-    case "$nonopt" in
-    *cc | *++ | gcc* | *-gcc*)
-      mode=link
-      for arg
-      do
-        case "$arg" in
-        -c)
-           mode=compile
-           break
-           ;;
-        esac
-      done
-      ;;
-    *db | *dbx)
-      mode=execute
-      ;;
-    *install*|cp|mv)
-      mode=install
-      ;;
-    *rm)
-      mode=uninstall
-      ;;
-    *)
-      # If we have no mode, but dlfiles were specified, then do execute mode.
-      test -n "$execute_dlfiles" && mode=execute
-
-      # Just use the default operation mode.
-      if test -z "$mode"; then
-        if test -n "$nonopt"; then
-          $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2
-        else
-          $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2
-        fi
-      fi
-      ;;
-    esac
-  fi
-
-  # Only execute mode is allowed to have -dlopen flags.
-  if test -n "$execute_dlfiles" && test "$mode" != execute; then
-    $echo "$modename: unrecognized option \`-dlopen'" 1>&2
-    $echo "$help" 1>&2
-    exit 1
-  fi
-
-  # Change the help message to a mode-specific one.
-  generic_help="$help"
-  help="Try \`$modename --help --mode=$mode' for more information."
-
-  # These modes are in order of execution frequency so that they run quickly.
-  case "$mode" in
-  # libtool compile mode
-  compile)
-    modename="$modename: compile"
-    # Get the compilation command and the source file.
-    base_compile=
-    lastarg=
-    srcfile="$nonopt"
-    suppress_output=
-
-    for arg
-    do
-      # Accept any command-line options.
-      case "$arg" in
-      -o)
-	$echo "$modename: you cannot specify the output filename with \`-o'" 1>&2
-	$echo "$help" 1>&2
-	exit 1
-	;;
-
-      -static)
-	build_libtool_libs=no
-	build_old_libs=yes
-	continue
-	;;
-      esac
-
-      # Accept the current argument as the source file.
-      lastarg="$srcfile"
-      srcfile="$arg"
-
-      # Aesthetically quote the previous argument.
-
-      # Backslashify any backslashes, double quotes, and dollar signs.
-      # These are the only characters that are still specially
-      # interpreted inside of double-quoted scrings.
-      lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`
-
-      # Double-quote args containing other shell metacharacters.
-      # Many Bourne shells cannot handle close brackets correctly in scan
-      # sets, so we specify it separately.
-      case "$lastarg" in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
-	lastarg="\"$lastarg\""
-	;;
-      esac
-
-      # Add the previous argument to base_compile.
-      if test -z "$base_compile"; then
-	base_compile="$lastarg"
-      else
-	base_compile="$base_compile $lastarg"
-      fi
-    done
-
-    # Get the name of the library object.
-    libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
-
-    # Recognize several different file suffixes.
-    xform='[cCFSfms]'
-    case "$libobj" in
-    *.ada) xform=ada ;;
-    *.adb) xform=adb ;;
-    *.ads) xform=ads ;;
-    *.asm) xform=asm ;;
-    *.c++) xform=c++ ;;
-    *.cc) xform=cc ;;
-    *.cpp) xform=cpp ;;
-    *.cxx) xform=cxx ;;
-    *.f90) xform=f90 ;;
-    *.for) xform=for ;;
-    esac
-
-    libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
-
-    case "$libobj" in
-    *.lo) obj=`$echo "X$libobj" | $Xsed -e 's/\.lo$/.o/'` ;;
-    *)
-      $echo "$modename: cannot determine name of library object from \`$srcfile'" 1>&2
-      exit 1
-      ;;
-    esac
-
-    if test -z "$base_compile"; then
-      $echo "$modename: you must specify a compilation command" 1>&2
-      $echo "$help" 1>&2
-      exit 1
-    fi
-
-    # Delete any leftover library objects.
-    if test "$build_old_libs" = yes; then
-      $run $rm $obj $libobj
-      trap "$run $rm $obj $libobj; exit 1" 1 2 15
-    else
-      $run $rm $libobj
-      trap "$run $rm $libobj; exit 1" 1 2 15
-    fi
-
-    # Only build a PIC object if we are building libtool libraries.
-    if test "$build_libtool_libs" = yes; then
-      # Without this assignment, base_compile gets emptied.
-      fbsd_hideous_sh_bug=$base_compile
-
-      # All platforms use -DPIC, to notify preprocessed assembler code.
-      $show "$base_compile$pic_flag -DPIC $srcfile"
-      if $run eval "$base_compile\$pic_flag -DPIC \$srcfile"; then :
-      else
-        test -n "$obj" && $run $rm $obj
-        exit 1
-      fi
-
-      # If we have no pic_flag, then copy the object into place and finish.
-      if test -z "$pic_flag"; then
-        $show "$LN_S $obj $libobj"
-        $run $LN_S $obj $libobj
-        exit $?
-      fi
-
-      # Just move the object, then go on to compile the next one
-      $show "$mv $obj $libobj"
-      $run $mv $obj $libobj || exit 1
-
-      # Allow error messages only from the first compilation.
-      suppress_output=' >/dev/null 2>&1'
-    fi
-
-    # Only build a position-dependent object if we build old libraries.
-    if test "$build_old_libs" = yes; then
-      # Suppress compiler output if we already did a PIC compilation.
-      $show "$base_compile $srcfile$suppress_output"
-      if $run eval "$base_compile \$srcfile$suppress_output"; then :
-      else
-        $run $rm $obj $libobj
-        exit 1
-      fi
-    fi
-
-    # Create an invalid libtool object if no PIC, so that we do not
-    # accidentally link it into a program.
-    if test "$build_libtool_libs" != yes; then
-      $show "echo timestamp > $libobj"
-      $run eval "echo timestamp > \$libobj" || exit $?
-    fi
-
-    exit 0
-    ;;
-
-  # libtool link mode
-  link)
-    modename="$modename: link"
-    CC="$nonopt"
-    allow_undefined=yes
-    compile_command="$CC"
-    finalize_command="$CC"
-
-    compile_shlibpath=
-    finalize_shlibpath=
-    deplibs=
-    dlfiles=
-    dlprefiles=
-    export_dynamic=no
-    hardcode_libdirs=
-    libobjs=
-    link_against_libtool_libs=
-    ltlibs=
-    objs=
-    prev=
-    prevarg=
-    release=
-    rpath=
-    perm_rpath=
-    temp_rpath=
-    vinfo=
-
-    # We need to know -static, to get the right output filenames.
-    for arg
-    do
-      case "$arg" in
-      -all-static | -static)
-        if test "X$arg" = "X-all-static" && test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
-	    $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
-        fi
-        build_libtool_libs=no
-	build_old_libs=yes
-        break
-        ;;
-      esac
-    done
-
-    # See if our shared archives depend on static archives.
-    test -n "$old_archive_from_new_cmds" && build_old_libs=yes
-
-    # Go through the arguments, transforming them on the way.
-    for arg
-    do
-      # If the previous option needs an argument, assign it.
-      if test -n "$prev"; then
-        case "$prev" in
-        output)
-          compile_command="$compile_command @OUTPUT@"
-          finalize_command="$finalize_command @OUTPUT@"
-          ;;
-        esac
-
-        case "$prev" in
-        dlfiles|dlprefiles)
-          case "$arg" in
-          *.la | *.lo) ;;  # We handle these cases below.
-          *)
-            dlprefiles="$dlprefiles $arg"
-            test "$prev" = dlfiles && dlfiles="$dlfiles $arg"
-            prev=
-            ;;
-          esac
-          ;;
-	release)
-	  release="-$arg"
-	  prev=
-	  continue
-	  ;;
-        rpath)
-          rpath="$rpath $arg"
-	  prev=
-	  continue
-	  ;;
-        *)
-          eval "$prev=\"\$arg\""
-          prev=
-          continue
-          ;;
-        esac
-      fi
-
-      prevarg="$arg"
-
-      case "$arg" in
-      -all-static)
-	if test -n "$link_static_flag"; then
-          compile_command="$compile_command $link_static_flag"
-	  finalize_command="$finalize_command $link_static_flag"
-        fi
-        continue
-	;;
-
-      -allow-undefined)
-	# FIXME: remove this flag sometime in the future.
-	$echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2
-	continue
-	;;
-
-      -dlopen)
-        prev=dlfiles
-        continue
-        ;;
-
-      -dlpreopen)
-        prev=dlprefiles
-        continue
-        ;;
-
-      -export-dynamic)
-        if test "$export_dynamic" != yes; then
-          export_dynamic=yes
-	  if test -n "$export_dynamic_flag_spec"; then
-	    eval arg=\"$export_dynamic_flag_spec\"
-	  else
-	    arg=
-	  fi
-
-          # Add the symbol object into the linking commands.
-	  compile_command="$compile_command @SYMFILE@"
-	  finalize_command="$finalize_command @SYMFILE@"
-        fi
-        ;;
-
-      -L*)
-        dir=`$echo "X$arg" | $Xsed -e 's%^-L\(.*\)$%\1%'`
-        case "$dir" in
-        /* | [A-Za-z]:\\*)
-	  # Add the corresponding hardcode_libdir_flag, if it is not identical.
-          ;;
-        *)
-          $echo "$modename: \`-L$dir' cannot specify a relative directory" 1>&2
-          exit 1
-          ;;
-        esac
-        deplibs="$deplibs $arg"
-        ;;
-
-      -l*) deplibs="$deplibs $arg" ;;
-
-      -no-undefined)
-	allow_undefined=no
-	continue
-	;;
-
-      -o) prev=output ;;
-
-      -release)
-	prev=release
-	continue
-	;;
-
-      -rpath)
-        prev=rpath
-        continue
-        ;;
-
-      -static)
-	# If we have no pic_flag, then this is the same as -all-static.
-	if test -z "$pic_flag" && test -n "$link_static_flag"; then
-          compile_command="$compile_command $link_static_flag"
-	  finalize_command="$finalize_command $link_static_flag"
-        fi
-	continue
-	;;
-
-      -version-info)
-        prev=vinfo
-        continue
-        ;;
-
-      # Some other compiler flag.
-      -* | +*)
-	# Unknown arguments in both finalize_command and compile_command need
-	# to be aesthetically quoted because they are evaled later.
-	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-	case "$arg" in
-	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
-	  arg="\"$arg\""
-	  ;;
-	esac
-        ;;
-
-      *.o | *.a)
-        # A standard object.
-        objs="$objs $arg"
-        ;;
-
-      *.lo)
-        # A library object.
-	if test "$prev" = dlfiles; then
-	  dlfiles="$dlfiles $arg"
-	  if test "$build_libtool_libs" = yes; then
-	    prev=
-	    continue
-	  else
-	    # If libtool objects are unsupported, then we need to preload.
-	    prev=dlprefiles
-	  fi
-	fi
-
-	if test "$prev" = dlprefiles; then
-	  # Preload the old-style object.
-	  dlprefiles="$dlprefiles "`$echo "X$arg" | $Xsed -e 's/\.lo$/\.o/'`
-	  prev=
-	fi
-	libobjs="$libobjs $arg"
-        ;;
-
-      *.la)
-        # A libtool-controlled library.
-
-        dlname=
-        libdir=
-        library_names=
-        old_library=
-
-        # Check to see that this really is a libtool archive.
-        if (sed -e '2q' $arg | egrep '^# Generated by ltmain\.sh') >/dev/null 2>&1; then :
-        else
-          $echo "$modename: \`$arg' is not a valid libtool archive" 1>&2
-          exit 1
-        fi
-
-        # If there is no directory component, then add one.
-        case "$arg" in
-        */* | *\\*) . $arg ;;
-        *) . ./$arg ;;
-        esac
-
-        if test -z "$libdir"; then
-          $echo "$modename: \`$arg' contains no -rpath information" 1>&2
-          exit 1
-        fi
-
-        # Get the name of the library we link against.
-        linklib=
-        for l in $old_library $library_names; do
-          linklib="$l"
-        done
-
-        if test -z "$linklib"; then
-          $echo "$modename: cannot find name of link library for \`$arg'" 1>&2
-          exit 1
-        fi
-
-        # Find the relevant object directory and library name.
-        name=`$echo "X$arg" | $Xsed -e 's%^.*/%%' -e 's/\.la$//' -e 's/^lib//'`
-        dir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
-        if test "X$dir" = "X$arg"; then
-          dir="$objdir"
-        else
-          dir="$dir/$objdir"
-        fi
-
-        # This library was specified with -dlopen.
-        if test "$prev" = dlfiles; then
-          dlfiles="$dlfiles $arg"
-          if test -z "$dlname"; then
-            # If there is no dlname, we need to preload.
-            prev=dlprefiles
-          else
-            # We should not create a dependency on this library, but we
-	    # may need any libraries it requires.
-	    compile_command="$compile_command$dependency_libs"
-	    finalize_command="$finalize_command$dependency_libs"
-            prev=
-            continue
-          fi
-        fi
-
-        # The library was specified with -dlpreopen.
-        if test "$prev" = dlprefiles; then
-          # Prefer using a static library (so that no silly _DYNAMIC symbols
-          # are required to link).
-          if test -n "$old_library"; then
-            dlprefiles="$dlprefiles $dir/$old_library"
-          else
-            dlprefiles="$dlprefiles $dir/$linklib"
-          fi
-          prev=
-        fi
-
-        if test "$build_libtool_libs" = yes && test -n "$library_names"; then
-          link_against_libtool_libs="$link_against_libtool_libs $arg"
-          if test -n "$shlibpath_var"; then
-            # Make sure the rpath contains only unique directories.
-            case "$temp_rpath " in
-            *" $dir "*) ;;
-            *) temp_rpath="$temp_rpath $dir" ;;
-            esac
-          fi
-
-	  # This is the magic to use -rpath.
-          if test -n "$hardcode_libdir_flag_spec"; then
-            if test -n "$hardcode_libdir_separator"; then
-              if test -z "$hardcode_libdirs"; then
-                # Put the magic libdir with the hardcode flag.
-                hardcode_libdirs="$libdir"
-                libdir="@HARDCODE_LIBDIRS@"
-              else
-                # Just accumulate the unique libdirs.
-		case "$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator" in
-		*"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
-		  ;;
-		*)
-		  hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
-		  ;;
-		esac
-                libdir=
-              fi
-            fi
-
-            if test -n "$libdir"; then
-              eval flag=\"$hardcode_libdir_flag_spec\"
-
-              compile_command="$compile_command $flag"
-              finalize_command="$finalize_command $flag"
-            fi
-          elif test -n "$runpath_var"; then
-            # Do the same for the permanent run path.
-            case "$perm_rpath " in
-            *" $libdir "*) ;;
-            *) perm_rpath="$perm_rpath $libdir" ;;
-            esac
-          fi
-
-
-          case "$hardcode_action" in
-          immediate)
-            if test "$hardcode_direct" = no; then
-              compile_command="$compile_command $dir/$linklib"
-            elif test "$hardcode_minus_L" = no; then
-              compile_command="$compile_command -L$dir -l$name"
-            elif test "$hardcode_shlibpath_var" = no; then
-              compile_shlibpath="$compile_shlibpath$dir:"
-              compile_command="$compile_command -l$name"
-            fi
-            ;;
-
-          relink)
-            # We need an absolute path.
-            case "$dir" in
-            /* | [A-Za-z]:\\*) ;;
-            *)
-              absdir=`cd "$dir" && pwd`
-              if test -z "$absdir"; then
-                $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
-                exit 1
-              fi
-              dir="$absdir"
-              ;;
-            esac
-
-            if test "$hardcode_direct" = yes; then
-              compile_command="$compile_command $dir/$linklib"
-            elif test "$hardcode_minus_L" = yes; then
-              compile_command="$compile_command -L$dir -l$name"
-            elif test "$hardcode_shlibpath_var" = yes; then
-              compile_shlibpath="$compile_shlibpath$dir:"
-              compile_command="$compile_command -l$name"
-            fi
-            ;;
-
-          *)
-            $echo "$modename: \`$hardcode_action' is an unknown hardcode action" 1>&2
-            exit 1
-            ;;
-          esac
-
-          # Finalize command for both is simple: just hardcode it.
-          if test "$hardcode_direct" = yes; then
-            finalize_command="$finalize_command $libdir/$linklib"
-          elif test "$hardcode_minus_L" = yes; then
-            finalize_command="$finalize_command -L$libdir -l$name"
-          elif test "$hardcode_shlibpath_var" = yes; then
-            finalize_shlibpath="$finalize_shlibpath$libdir:"
-            finalize_command="$finalize_command -l$name"
-          else
-            # We cannot seem to hardcode it, guess we'll fake it.
-            finalize_command="$finalize_command -L$libdir -l$name"
-          fi
-        else
-          # Transform directly to old archives if we don't build new libraries.
-          if test -n "$pic_flag" && test -z "$old_library"; then
-            $echo "$modename: cannot find static library for \`$arg'" 1>&2
-            exit 1
-          fi
-
-	  # Here we assume that one of hardcode_direct or hardcode_minus_L
-	  # is not unsupported.  This is valid on all known static and
-	  # shared platforms.
-	  if test "$hardcode_direct" != unsupported; then
-	    test -n "$old_library" && linklib="$old_library"
-	    compile_command="$compile_command $dir/$linklib"
-	    finalize_command="$finalize_command $dir/$linklib"
-	  else
-	    compile_command="$compile_command -L$dir -l$name"
-	    finalize_command="$finalize_command -L$dir -l$name"
-	  fi
-        fi
-
-	# Add in any libraries that this one depends upon.
-	compile_command="$compile_command$dependency_libs"
-	finalize_command="$finalize_command$dependency_libs"
-	continue
-        ;;
-
-      # Some other compiler argument.
-      *)
-	# Unknown arguments in both finalize_command and compile_command need
-	# to be aesthetically quoted because they are evaled later.
-	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-	case "$arg" in
-	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
-	  arg="\"$arg\""
-	  ;;
-	esac
-        ;;
-      esac
-
-      # Now actually substitute the argument into the commands.
-      if test -n "$arg"; then
-	compile_command="$compile_command $arg"
-	finalize_command="$finalize_command $arg"
-      fi
-    done
-
-    if test -n "$prev"; then
-      $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
-      $echo "$help" 1>&2
-      exit 1
-    fi
-
-    if test -n "$vinfo" && test -n "$release"; then
-      $echo "$modename: you cannot specify both \`-version-info' and \`-release'" 1>&2
-      $echo "$help" 1>&2
-      exit 1
-    fi
-
-    oldlib=
-    oldobjs=
-    case "$output" in
-    "")
-      $echo "$modename: you must specify an output file" 1>&2
-      $echo "$help" 1>&2
-      exit 1
-      ;;
-
-    */* | *\\*)
-      $echo "$modename: output file \`$output' must have no directory components" 1>&2
-      exit 1
-      ;;
-
-    *.a)
-      # Now set the variables for building old libraries.
-      build_libtool_libs=no
-      build_old_libs=yes
-      oldlib="$output"
-      $show "$rm $oldlib"
-      $run $rm $oldlib
-      ;;
-
-    *.la)
-      # Make sure we only generate libraries of the form `libNAME.la'.
-      case "$output" in
-      lib*) ;;
-      *)
-	$echo "$modename: libtool library \`$arg' must begin with \`lib'" 1>&2
-	$echo "$help" 1>&2
-	exit 1
-	;;
-      esac
-
-      name=`$echo "X$output" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
-      eval libname=\"$libname_spec\"
-
-      # All the library-specific variables (install_libdir is set above).
-      library_names=
-      old_library=
-      dlname=
-      current=0
-      revision=0
-      age=0
-
-      if test -n "$objs"; then
-        $echo "$modename: cannot build libtool library \`$output' from non-libtool objects:$objs" 2>&1
-        exit 1
-      fi
-
-      # How the heck are we supposed to write a wrapper for a shared library?
-      if test -n "$link_against_libtool_libs"; then
-        $echo "$modename: libtool library \`$output' may not depend on uninstalled libraries:$link_against_libtool_libs" 1>&2
-        exit 1
-      fi
-
-      if test -n "$dlfiles$dlprefiles"; then
-        $echo "$modename: warning: \`-dlopen' is ignored while creating libtool libraries" 1>&2
-        # Nullify the symbol file.
-        compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
-        finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
-      fi
-
-      if test -z "$rpath"; then
-        $echo "$modename: you must specify an installation directory with \`-rpath'" 1>&2
-	$echo "$help" 1>&2
-        exit 1
-      fi
-
-      set dummy $rpath
-      if test $# -gt 2; then
-	$echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2
-      fi
-      install_libdir="$2"
-
-      # Parse the version information argument.
-      IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=':'
-      set dummy $vinfo
-      IFS="$save_ifs"
-
-      if test -n "$5"; then
-        $echo "$modename: too many parameters to \`-version-info'" 1>&2
-        $echo "$help" 1>&2
-        exit 1
-      fi
-
-      test -n "$2" && current="$2"
-      test -n "$3" && revision="$3"
-      test -n "$4" && age="$4"
-
-      # Check that each of the things are valid numbers.
-      case "$current" in
-      0 | [1-9] | [1-9][0-9]*) ;;
-      *)
-        $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2
-        $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-        exit 1
-        ;;
-      esac
-
-      case "$revision" in
-      0 | [1-9] | [1-9][0-9]*) ;;
-      *)
-        $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2
-        $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-        exit 1
-        ;;
-      esac
-
-      case "$age" in
-      0 | [1-9] | [1-9][0-9]*) ;;
-      *)
-        $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2
-        $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-        exit 1
-        ;;
-      esac
-
-      if test $age -gt $current; then
-        $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
-        $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-        exit 1
-      fi
-
-      # Calculate the version variables.
-      version_vars="version_type current age revision"
-      case "$version_type" in
-      none) ;;
-
-      linux)
-        version_vars="$version_vars major versuffix"
-        major=`expr $current - $age`
-        versuffix="$major.$age.$revision"
-        ;;
-
-      osf)
-        version_vars="$version_vars versuffix verstring"
-        major=`expr $current - $age`
-        versuffix="$current.$age.$revision"
-        verstring="$versuffix"
-
-        # Add in all the interfaces that we are compatible with.
-        loop=$age
-        while test $loop != 0; do
-          iface=`expr $current - $loop`
-          loop=`expr $loop - 1`
-          verstring="$verstring:${iface}.0"
-        done
-
-        # Make executables depend on our current version.
-        verstring="$verstring:${current}.0"
-        ;;
-
-      sunos)
-        version_vars="$version_vars major versuffix"
-        major="$current"
-        versuffix="$current.$revision"
-        ;;
-
-      *)
-        $echo "$modename: unknown library version type \`$version_type'" 1>&2
-        echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
-        exit 1
-        ;;
-      esac
-
-      # Create the output directory, or remove our outputs if we need to.
-      if test -d $objdir; then
-        $show "$rm $objdir/$output $objdir/$libname.* $objdir/${libname}${release}.*"
-        $run $rm $objdir/$output $objdir/$libname.* $objdir/${libname}${release}.*
-      else
-        $show "$mkdir $objdir"
-        $run $mkdir $objdir
-	status=$?
-	if test $status -eq 0 || test -d $objdir; then :
-	else
-	  exit $status
-	fi
-      fi
-
-      # Check to see if the archive will have undefined symbols.
-      if test "$allow_undefined" = yes; then
-        if test "$allow_undefined_flag" = unsupported; then
-          $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2
-          build_libtool_libs=no
-	  build_old_libs=yes
-        fi
-      else
-        # Don't allow undefined symbols.
-        allow_undefined_flag="$no_undefined_flag"
-      fi
-
-      # Add libc to deplibs on all systems.
-      dependency_libs="$deplibs"
-      deplibs="$deplibs -lc"
-
-      if test "$build_libtool_libs" = yes; then
-        # Get the real and link names of the library.
-        eval library_names=\"$library_names_spec\"
-        set dummy $library_names
-        realname="$2"
-        shift; shift
-
-        if test -n "$soname_spec"; then
-          eval soname=\"$soname_spec\"
-        else
-          soname="$realname"
-        fi
-
-        lib="$objdir/$realname"
-	for link
-	do
-	  linknames="$linknames $link"
-	done
-
-        # Use standard objects if they are PIC.
-        test -z "$pic_flag" && libobjs=`$echo "X$libobjs " | $Xsed -e 's/\.lo /.o /g' -e 's/ $//g'`
-
-        # Do each of the archive commands.
-        eval cmds=\"$archive_cmds\"
-        IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=';'
-        for cmd in $cmds; do
-          IFS="$save_ifs"
-          $show "$cmd"
-          $run eval "$cmd" || exit $?
-        done
-        IFS="$save_ifs"
-
-        # Create links to the real library.
-        for linkname in $linknames; do
-          $show "(cd $objdir && $LN_S $realname $linkname)"
-          $run eval '(cd $objdir && $LN_S $realname $linkname)' || exit $?
-        done
-
-        # If -export-dynamic was specified, set the dlname.
-        if test "$export_dynamic" = yes; then
-          # On all known operating systems, these are identical.
-          dlname="$soname"
-        fi
-      fi
-
-      # Now set the variables for building old libraries.
-      oldlib="$objdir/$libname.a"
-      ;;
-
-    *.lo | *.o)
-      if test -n "$link_against_libtool_libs"; then
-        $echo "$modename: error: cannot link libtool libraries into reloadable objects" 1>&2
-        exit 1
-      fi
-
-      if test -n "$deplibs"; then
-        $echo "$modename: warning: \`-l' and \`-L' are ignored while creating objects" 1>&2
-      fi
-
-      if test -n "$dlfiles$dlprefiles"; then
-        $echo "$modename: warning: \`-dlopen' is ignored while creating objects" 1>&2
-        # Nullify the symbol file.
-        compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
-        finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
-      fi
-
-      if test -n "$rpath"; then
-        $echo "$modename: warning: \`-rpath' is ignored while creating objects" 1>&2
-      fi
-
-      if test -n "$vinfo"; then
-        $echo "$modename: warning: \`-version-info' is ignored while creating objects" 1>&2
-      fi
-
-      if test -n "$release"; then
-        $echo "$modename: warning: \`-release' is ignored while creating objects" 1>&2
-      fi
-
-      case "$output" in
-      *.lo)
-        if test -n "$objs"; then
-          $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
-          exit 1
-        fi
-        libobj="$output"
-        obj=`$echo "X$output" | $Xsed -e 's/\.lo$/.o/'`
-        ;;
-      *)
-        libobj=
-        obj="$output"
-        ;;
-      esac
-
-      # Delete the old objects.
-      $run $rm $obj $libobj
-
-      # Create the old-style object.
-      reload_objs="$objs"`$echo "X$libobjs " | $Xsed -e 's/[^       ]*\.a //g' -e 's/\.lo /.o /g' -e 's/ $//g'`
-
-      output="$obj"
-      eval cmds=\"$reload_cmds\"
-      IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=';'
-      for cmd in $cmds; do
-        IFS="$save_ifs"
-        $show "$cmd"
-        $run eval "$cmd" || exit $?
-      done
-      IFS="$save_ifs"
-
-      # Exit if we aren't doing a library object file.
-      test -z "$libobj" && exit 0
-
-      if test "$build_libtool_libs" != yes; then
-        # Create an invalid libtool object if no PIC, so that we don't
-        # accidentally link it into a program.
-        $show "echo timestamp > $libobj"
-        $run eval "echo timestamp > $libobj" || exit $?
-        exit 0
-      fi
-
-      if test -n "$pic_flag"; then
-        # Only do commands if we really have different PIC objects.
-        reload_objs="$libobjs"
-        output="$libobj"
-        eval cmds=\"$reload_cmds\"
-        IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=';'
-        for cmd in $cmds; do
-          IFS="$save_ifs"
-          $show "$cmd"
-          $run eval "$cmd" || exit $?
-        done
-        IFS="$save_ifs"
-      else
-        # Just create a symlink.
-        $show "$LN_S $obj $libobj"
-        $run $LN_S $obj $libobj || exit 1
-      fi
-
-      exit 0
-      ;;
-
-    *)
-      if test -n "$vinfo"; then
-        $echo "$modename: warning: \`-version-info' is ignored while linking programs" 1>&2
-      fi
-
-      if test -n "$release"; then
-        $echo "$modename: warning: \`-release' is ignored while creating objects" 1>&2
-      fi
-
-      if test -n "$rpath"; then
-	# If the user specified any rpath flags, then add them.
-	for libdir in $rpath; do
-          if test -n "$hardcode_libdir_flag_spec"; then
-            if test -n "$hardcode_libdir_separator"; then
-              if test -z "$hardcode_libdirs"; then
-                # Put the magic libdir with the hardcode flag.
-                hardcode_libdirs="$libdir"
-                libdir="@HARDCODE_LIBDIRS@"
-              else
-                # Just accumulate the unique libdirs.
-		case "$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator" in
-		*"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
-		  ;;
-		*)
-		  hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
-		  ;;
-		esac
-                libdir=
-              fi
-            fi
-
-            if test -n "$libdir"; then
-              eval flag=\"$hardcode_libdir_flag_spec\"
-
-              compile_command="$compile_command $flag"
-              finalize_command="$finalize_command $flag"
-            fi
-          elif test -n "$runpath_var"; then
-            case "$perm_rpath " in
-            *" $libdir "*) ;;
-            *) perm_rpath="$perm_rpath $libdir" ;;
-            esac
-          fi
-	done
-      fi
-
-      # Substitute the hardcoded libdirs into the compile commands.
-      if test -n "$hardcode_libdir_separator"; then
-	compile_command=`$echo "X$compile_command" | $Xsed -e "s%@HARDCODE_LIBDIRS@%$hardcode_libdirs%g"`
-	finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@HARDCODE_LIBDIRS@%$hardcode_libdirs%g"`
-      fi
-
-      if test -n "$libobjs" && test "$build_old_libs" = yes; then
-        # Transform all the library objects into standard objects.
-        compile_command=`$echo "X$compile_command " | $Xsed -e 's/\.lo /.o /g' -e 's/ $//'`
-        finalize_command=`$echo "X$finalize_command " | $Xsed -e 's/\.lo /.o /g' -e 's/ $//'`
-      fi
-
-      if test "$export_dynamic" = yes && test -n "$NM" && test -n "$global_symbol_pipe"; then
-        dlsyms="${output}S.c"
-      else
-        dlsyms=
-      fi
-
-      if test -n "$dlsyms"; then
-        # Add our own program objects to the preloaded list.
-        dlprefiles=`$echo "X$objs$dlprefiles " | $Xsed -e 's/\.lo /.o /g' -e 's/ $//'`
-
-	# Discover the nlist of each of the dlfiles.
-        nlist="$objdir/${output}.nm"
-
-	if test -d $objdir; then
-	  $show "$rm $nlist ${nlist}T"
-	  $run $rm "$nlist" "${nlist}T"
-	else
-	  $show "$mkdir $objdir"
-	  $run $mkdir $objdir
-	  status=$?
-	  if test $status -eq 0 || test -d $objdir; then :
-	  else
-	    exit $status
-	  fi
-	fi
-
-        for arg in $dlprefiles; do
-	  $show "extracting global C symbols from \`$arg'"
-	  $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
-        done
-
-        # Parse the name list into a source file.
-        $show "creating $objdir/$dlsyms"
-        if test -z "$run"; then
-	  # Make sure we at least have an empty file.
-	  test -f "$nlist" || : > "$nlist"
-
-	  # Try sorting and uniquifying the output.
-	  if sort "$nlist" | uniq > "$nlist"T; then
-	    mv -f "$nlist"T "$nlist"
-	    wcout=`wc "$nlist" 2>/dev/null`
-	    count=`echo "X$wcout" | $Xsed -e 's/^[ 	]*\([0-9][0-9]*\).*$/\1/'`
-	    (test "$count" -ge 0) 2>/dev/null || count=-1
-	  else
-	    $rm "$nlist"T
-	    count=-1
-	  fi
-
-	  case "$dlsyms" in
-	  "") ;;
-	  *.c)
-	    $echo > "$objdir/$dlsyms" "\
-/* $dlsyms - symbol resolution table for \`$output' dlsym emulation. */
-/* Generated by $PROGRAM - GNU $PACKAGE $VERSION */
-
-#ifdef __cplusplus
-extern \"C\" {
-#endif
-
-/* Prevent the only kind of declaration conflicts we can make. */
-#define dld_preloaded_symbol_count some_other_symbol
-#define dld_preloaded_symbols some_other_symbol
-
-/* External symbol declarations for the compiler. */\
-"
-
-	    if test -f "$nlist"; then
-	      sed -e 's/^.* \(.*\)$/extern char \1;/' < "$nlist" >> "$objdir/$dlsyms"
-	    else
-	      echo '/* NONE */' >> "$objdir/$dlsyms"
-	    fi
-
-	    $echo >> "$objdir/$dlsyms" "\
-
-#undef dld_preloaded_symbol_count
-#undef dld_preloaded_symbols
-
-#if defined (__STDC__) && __STDC__
-# define __ptr_t void *
-#else
-# define __ptr_t char *
-#endif
-
-/* The number of symbols in dld_preloaded_symbols, -1 if unsorted. */
-int dld_preloaded_symbol_count = $count;
-
-/* The mapping between symbol names and symbols. */
-struct {
-  char *name;
-  __ptr_t address;
-}
-dld_preloaded_symbols[] =
-{\
-"
-
-	    if test -f "$nlist"; then
-	      sed 's/^\(.*\) \(.*\)$/  {"\1", (__ptr_t) \&\2},/' < "$nlist" >> "$objdir/$dlsyms"
-	    fi
-
-	    $echo >> "$objdir/$dlsyms" "\
-  {0, (__ptr_t) 0}
-};
-
-#ifdef __cplusplus
-}
-#endif\
-"
-	    ;;
-
-	  *)
-	    $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
-	    exit 1
-	    ;;
-	  esac
-        fi
-
-        # Now compile the dynamic symbol file.
-        $show "(cd $objdir && $CC -c$no_builtin_flag \"$dlsyms\")"
-        $run eval '(cd $objdir && $CC -c$no_builtin_flag "$dlsyms")' || exit $?
-
-        # Transform the symbol file into the correct name.
-        compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$objdir/${output}S.o%"`
-        finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$objdir/${output}S.o%"`
-      elif test "$export_dynamic" != yes; then
-        test -n "$dlfiles$dlprefiles" && $echo "$modename: warning: \`-dlopen' and \`-dlpreopen' are ignored without \`-export-dynamic'" 1>&2
-      else
-        # We keep going just in case the user didn't refer to
-        # dld_preloaded_symbols.  The linker will fail if global_symbol_pipe
-        # really was required.
-        $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2
-
-        # Nullify the symbol file.
-        compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
-        finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
-      fi
-
-      if test -z "$link_against_libtool_libs" || test "$build_libtool_libs" != yes; then
-        # Replace the output file specification.
-        compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
-        finalize_command=`$echo "X$finalize_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
-
-        # We have no uninstalled library dependencies, so finalize right now.
-        $show "$compile_command"
-        $run eval "$compile_command"
-        exit $?
-      fi
-
-      # Replace the output file specification.
-      compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$objdir/$output"'%g'`
-      finalize_command=`$echo "X$finalize_command" | $Xsed -e 's%@OUTPUT@%'"$objdir/$output"'T%g'`
-
-      # Create the binary in the object directory, then wrap it.
-      if test -d $objdir; then :
-      else
-        $show "$mkdir $objdir"
-	$run $mkdir $objdir
-	status=$?
-	if test $status -eq 0 || test -d $objdir; then :
-	else
-	  exit $status
-	fi
-      fi
-
-      if test -n "$shlibpath_var"; then
-        # We should set the shlibpath_var
-        rpath=
-        for dir in $temp_rpath; do
-          case "$dir" in
-          /* | [A-Za-z]:\\*)
-            # Absolute path.
-            rpath="$rpath$dir:"
-            ;;
-          *)
-            # Relative path: add a thisdir entry.
-            rpath="$rpath\$thisdir/$dir:"
-            ;;
-          esac
-        done
-        temp_rpath="$rpath"
-      fi
-
-      # Delete the old output file.
-      $run $rm $output
-
-      if test -n "$compile_shlibpath"; then
-        compile_command="$shlibpath_var=\"$compile_shlibpath\$$shlibpath_var\" $compile_command"
-      fi
-      if test -n "$finalize_shlibpath"; then
-        finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
-      fi
-
-      if test -n "$runpath_var" && test -n "$perm_rpath"; then
-        # We should set the runpath_var.
-        rpath=
-        for dir in $perm_rpath; do
-          rpath="$rpath$dir:"
-        done
-        compile_command="$runpath_var=\"$rpath\$$runpath_var\" $compile_command"
-        finalize_command="$runpath_var=\"$rpath\$$runpath_var\" $finalize_command"
-      fi
-
-      case "$hardcode_action" in
-      relink)
-        # AGH! Flame the AIX and HP-UX people for me, will ya?
-        $echo "$modename: warning: using a buggy system linker" 1>&2
-        $echo "$modename: relinking will be required before \`$output' can be installed" 1>&2
-        ;;
-      esac
-
-      $show "$compile_command"
-      $run eval "$compile_command" || exit $?
-
-      # Now create the wrapper script.
-      $show "creating $output"
-
-      # Quote the finalize command for shipping.
-      finalize_command=`$echo "X$finalize_command" | $Xsed -e "$sed_quote_subst"`
-
-      # Quote $echo for shipping.
-      qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"`
-
-      # Only actually do things if our run command is non-null.
-      if test -z "$run"; then
-        $rm $output
-        trap "$rm $output; exit 1" 1 2 15
-
-        $echo > $output "\
-#! /bin/sh
-
-# $output - temporary wrapper script for $objdir/$output
-# Generated by ltmain.sh - GNU $PACKAGE $VERSION
-#
-# The $output program cannot be directly executed until all the libtool
-# libraries that it depends on are installed.
-#
-# This wrapper script should never be moved out of \``pwd`'.
-# If it is, it will not operate correctly.
-
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='sed -e s/^X//'
-sed_quote_subst='$sed_quote_subst'
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-if test \"\${CDPATH+set}\" = set; then CDPATH=; export CDPATH; fi
-
-# This environment variable determines our operation mode.
-if test \"\$libtool_install_magic\" = \"$magic\"; then
-  # install mode needs the following variables:
-  link_against_libtool_libs='$link_against_libtool_libs'
-  finalize_command=\"$finalize_command\"
-else
-  # When we are sourced in execute mode, \$file and \$echo are already set.
-  if test \"\$libtool_execute_magic\" = \"$magic\"; then :
-  else
-    echo=\"$qecho\"
-    file=\"\$0\"
-  fi\
-"
-        $echo >> $output "\
-
-  # Find the directory that this script lives in.
-  thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
-  test \"x\$thisdir\" = \"x\$file\" && thisdir=.
-
-  # Follow symbolic links until we get to the real thisdir.
-  file=\`ls -ld \"\$file\" | sed -n 's/.*-> //p'\`
-  while test -n \"\$file\"; do
-    destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
-
-    # If there was a directory component, then change thisdir.
-    if test \"x\$destdir\" != \"x\$file\"; then
-      case \"\$destdir\" in
-      /* | [A-Za-z]:\\*) thisdir=\"\$destdir\" ;;
-      *) thisdir=\"\$thisdir/\$destdir\" ;;
-      esac
-    fi
-
-    file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
-    file=\`ls -ld \"\$thisdir/\$file\" | sed -n 's/.*-> //p'\`
-  done
-
-  # Try to get the absolute directory name.
-  absdir=\`cd \"\$thisdir\" && pwd\`
-  test -n \"\$absdir\" && thisdir=\"\$absdir\"
-
-  progdir=\"\$thisdir/$objdir\"
-  program='$output'
-
-  if test -f \"\$progdir/\$program\"; then"
-
-        # Export our shlibpath_var if we have one.
-        if test -n "$shlibpath_var" && test -n "$temp_rpath"; then
-          $echo >> $output "\
-    # Add our own library path to $shlibpath_var
-    $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
-
-    # Some systems cannot cope with colon-terminated $shlibpath_var
-    $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/:*\$//'\`
-
-    export $shlibpath_var
-"
-        fi
-
-        $echo >> $output "\
-    if test \"\$libtool_execute_magic\" != \"$magic\"; then
-      # Run the actual program with our arguments.
-
-      # Export the path to the program.
-      PATH=\"\$progdir:\$PATH\"
-      export PATH
-
-      exec \$program \${1+\"\$@\"}
-
-      \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\"
-      exit 1
-    fi
-  else
-    # The program doesn't exist.
-    \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2
-    \$echo \"This script is just a wrapper for \$program.\" 1>&2
-    echo \"See the $PACKAGE documentation for more information.\" 1>&2
-    exit 1
-  fi
-fi\
-"
-        chmod +x $output
-      fi
-      exit 0
-      ;;
-    esac
-
-    # See if we need to build an old-fashioned archive.
-    if test "$build_old_libs" = "yes"; then
-      # Transform .lo files to .o files.
-      oldobjs="$objs"`$echo "X$libobjs " | $Xsed -e 's/[^   ]*\.a //g' -e 's/\.lo /.o /g' -e 's/ $//g'`
-
-      # Do each command in the archive commands.
-      if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
-	eval cmds=\"$old_archive_from_new_cmds\"
-      else
-	eval cmds=\"$old_archive_cmds\"
-      fi
-      IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=';'
-      for cmd in $cmds; do
-        IFS="$save_ifs"
-        $show "$cmd"
-        $run eval "$cmd" || exit $?
-      done
-      IFS="$save_ifs"
-    fi
-
-    # Now create the libtool archive.
-    case "$output" in
-    *.la)
-      old_library=
-      test "$build_old_libs" = yes && old_library="$libname.a"
-
-      $show "creating $output"
-
-      # Only create the output if not a dry run.
-      if test -z "$run"; then
-        $echo > $output "\
-# $output - a libtool library file
-# Generated by ltmain.sh - GNU $PACKAGE $VERSION
-
-# The name that we can dlopen(3).
-dlname='$dlname'
-
-# Names of this library.
-library_names='$library_names'
-
-# The name of the static archive.
-old_library='$old_library'
-
-# Libraries that this one depends upon.
-dependency_libs='$dependency_libs'
-
-# Version information for $libname.
-current=$current
-age=$age
-revision=$revision
-
-# Directory that this library needs to be installed in:
-libdir='$install_libdir'\
-"
-      fi
-
-      # Do a symbolic link so that the libtool archive can be found in
-      # LD_LIBRARY_PATH before the program is installed.
-      $show "(cd $objdir && $LN_S ../$output $output)"
-      $run eval "(cd $objdir && $LN_S ../$output $output)" || exit 1
-      ;;
-    esac
-    exit 0
-    ;;
-
-  # libtool install mode
-  install)
-    modename="$modename: install"
-
-    # There may be an optional /bin/sh argument at the beginning of
-    # install_prog (especially on Windows NT).
-    if test "$nonopt" = "$SHELL"; then
-      # Aesthetically quote it.
-      arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
-      case "$arg" in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
-	arg="\"$arg\""
-	;;
-      esac
-      install_prog="$arg "
-      arg="$1"
-      shift
-    else
-      install_prog=
-      arg="$nonopt"
-    fi
-
-    # The real first argument should be the name of the installation program.
-    # Aesthetically quote it.
-    arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-    case "$arg" in
-    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
-      arg="\"$arg\""
-      ;;
-    esac
-    install_prog="$install_prog$arg"
-
-    # We need to accept at least all the BSD install flags.
-    dest=
-    files=
-    opts=
-    prev=
-    install_type=
-    isdir=
-    stripme=
-    for arg
-    do
-      if test -n "$dest"; then
-        files="$files $dest"
-        dest="$arg"
-        continue
-      fi
-
-      case "$arg" in
-      -d) isdir=yes ;;
-      -f) prev="-f" ;;
-      -g) prev="-g" ;;
-      -m) prev="-m" ;;
-      -o) prev="-o" ;;
-      -s)
-        stripme=" -s"
-        continue
-        ;;
-      -*) ;;
-
-      *)
-        # If the previous option needed an argument, then skip it.
-        if test -n "$prev"; then
-          prev=
-        else
-          dest="$arg"
-          continue
-        fi
-        ;;
-      esac
-
-      # Aesthetically quote the argument.
-      arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-      case "$arg" in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
-	arg="\"$arg\""
-	;;
-      esac
-      install_prog="$install_prog $arg"
-    done
-
-    if test -z "$install_prog"; then
-      $echo "$modename: you must specify an install program" 1>&2
-      $echo "$help" 1>&2
-      exit 1
-    fi
-
-    if test -n "$prev"; then
-      $echo "$modename: the \`$prev' option requires an argument" 1>&2
-      $echo "$help" 1>&2
-      exit 1
-    fi
-
-    if test -z "$files"; then
-      if test -z "$dest"; then
-        $echo "$modename: no file or destination specified" 1>&2
-      else
-        $echo "$modename: you must specify a destination" 1>&2
-      fi
-      $echo "$help" 1>&2
-      exit 1
-    fi
-
-    # Strip any trailing slash from the destination.
-    dest=`$echo "X$dest" | $Xsed -e 's%/$%%'`
-
-    # Check to see that the destination is a directory.
-    test -d "$dest" && isdir=yes
-    if test -n "$isdir"; then
-      destdir="$dest"
-      destname=
-    else
-      destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'`
-      test "X$destdir" = "X$dest" && destdir=.
-      destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'`
-
-      # Not a directory, so check to see that there is only one file specified.
-      set dummy $files
-      if test $# -gt 2; then
-        $echo "$modename: \`$dest' is not a directory" 1>&2
-        $echo "$help" 1>&2
-        exit 1
-      fi
-    fi
-    case "$destdir" in
-    /* | [A-Za-z]:\\*) ;;
-    *)
-      for file in $files; do
-        case "$file" in
-        *.lo) ;;
-        *)
-          $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
-          $echo "$help" 1>&2
-          exit 1
-          ;;
-        esac
-      done
-      ;;
-    esac
-
-    # This variable tells wrapper scripts just to set variables rather
-    # than running their programs.
-    libtool_install_magic="$magic"
-
-    staticlibs=
-    future_libdirs=
-    current_libdirs=
-    for file in $files; do
-
-      # Do each installation.
-      case "$file" in
-      *.a)
-        # Do the static libraries later.
-        staticlibs="$staticlibs $file"
-        ;;
-
-      *.la)
-        # Check to see that this really is a libtool archive.
-        if (sed -e '2q' $file | egrep '^# Generated by ltmain\.sh') >/dev/null 2>&1; then :
-        else
-          $echo "$modename: \`$file' is not a valid libtool archive" 1>&2
-          $echo "$help" 1>&2
-          exit 1
-        fi
-
-        library_names=
-        old_library=
-        # If there is no directory component, then add one.
-        case "$file" in
-        */* | *\\*) . $file ;;
-        *) . ./$file ;;
-        esac
-
-        # Add the libdir to current_libdirs if it is the destination.
-        if test "X$destdir" = "X$libdir"; then
-          case "$current_libdirs " in
-          *" $libdir "*) ;;
-          *) current_libdirs="$current_libdirs $libdir" ;;
-          esac
-        else
-          # Note the libdir as a future libdir.
-          case "$future_libdirs " in
-          *" $libdir "*) ;;
-          *) future_libdirs="$future_libdirs $libdir" ;;
-          esac
-        fi
-
-        dir="`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/"
-        test "X$dir" = "X$file/" && dir=
-        dir="$dir$objdir"
-
-        # See the names of the shared library.
-        set dummy $library_names
-        if test -n "$2"; then
-          realname="$2"
-          shift
-          shift
-
-          # Install the shared library and build the symlinks.
-          $show "$install_prog $dir/$realname $destdir/$realname"
-          $run eval "$install_prog $dir/$realname $destdir/$realname" || exit $?
-          test "X$dlname" = "X$realname" && dlname=
-
-          if test $# -gt 0; then
-            # Delete the old symlinks.
-            rmcmd="$rm"
-            for linkname
-            do
-              rmcmd="$rmcmd $destdir/$linkname"
-            done
-            $show "$rmcmd"
-            $run $rmcmd
-
-            # ... and create new ones.
-            for linkname
-            do
-              test "X$dlname" = "X$linkname" && dlname=
-              $show "(cd $destdir && $LN_S $realname $linkname)"
-              $run eval "(cd $destdir && $LN_S $realname $linkname)"
-            done
-          fi
-
-          if test -n "$dlname"; then
-            # Install the dynamically-loadable library.
-            $show "$install_prog $dir/$dlname $destdir/$dlname"
-            $run eval "$install_prog $dir/$dlname $destdir/$dlname" || exit $?
-          fi
-
-          # Do each command in the postinstall commands.
-          lib="$destdir/$realname"
-          eval cmds=\"$postinstall_cmds\"
-          IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=';'
-          for cmd in $cmds; do
-            IFS="$save_ifs"
-            $show "$cmd"
-            $run eval "$cmd" || exit $?
-          done
-          IFS="$save_ifs"
-        fi
-
-        # Install the pseudo-library for information purposes.
-        name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-        $show "$install_prog $file $destdir/$name"
-        $run eval "$install_prog $file $destdir/$name" || exit $?
-
-        # Maybe install the static library, too.
-        test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
-        ;;
-
-      *.lo)
-        # Install (i.e. copy) a libtool object.
-
-        # Figure out destination file name, if it wasn't already specified.
-        if test -n "$destname"; then
-          destfile="$destdir/$destname"
-        else
-          destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-          destfile="$destdir/$destfile"
-        fi
-
-        # Deduce the name of the destination old-style object file.
-        case "$destfile" in
-        *.lo)
-          staticdest=`$echo "X$destfile" | $Xsed -e 's/\.lo$/\.o/'`
-          ;;
-        *.o)
-          staticdest="$destfile"
-          destfile=
-          ;;
-        *)
-          $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
-          $echo "$help" 1>&2
-          exit 1
-          ;;
-        esac
-
-        # Install the libtool object if requested.
-        if test -n "$destfile"; then
-          $show "$install_prog $file $destfile"
-          $run eval "$install_prog $file $destfile" || exit $?
-        fi
-
-        # Install the old object if enabled.
-        if test "$build_old_libs" = yes; then
-          # Deduce the name of the old-style object file.
-          staticobj=`$echo "X$file" | $Xsed -e 's/\.lo$/\.o/'`
-
-          $show "$install_prog $staticobj $staticdest"
-          $run eval "$install_prog \$staticobj \$staticdest" || exit $?
-        fi
-        exit 0
-        ;;
-
-      *)
-        # Do a test to see if this is really a libtool program.
-        if (sed -e '4q' $file | egrep '^# Generated by ltmain\.sh') >/dev/null 2>&1; then
-          link_against_libtool_libs=
-          finalize_command=
-
-          # If there is no directory component, then add one.
-          case "$file" in
-          */* | *\\*) . $file ;;
-          *) . ./$file ;;
-          esac
-
-          # Check the variables that should have been set.
-          if test -z "$link_against_libtool_libs" || test -z "$finalize_command"; then
-            $echo "$modename: invalid libtool wrapper script \`$file'" 1>&2
-            exit 1
-          fi
-
-          finalize=yes
-          for lib in $link_against_libtool_libs; do
-            # Check to see that each library is installed.
-            libdir=
-            if test -f "$lib"; then
-              # If there is no directory component, then add one.
-              case "$lib" in
-              */* | *\\*) . $lib ;;
-              *) . ./$lib ;;
-              esac
-            fi
-            libfile="$libdir/`$echo "X$lib" | $Xsed -e 's%^.*/%%g'`"
-            if test -z "$libdir"; then
-              $echo "$modename: warning: \`$lib' contains no -rpath information" 1>&2
-            elif test -f "$libfile"; then :
-            else
-              $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2
-              finalize=no
-            fi
-          done
-
-          if test "$hardcode_action" = relink; then
-            if test "$finalize" = yes; then
-              $echo "$modename: warning: relinking \`$file' on behalf of your buggy system linker" 1>&2
-              $show "$finalize_command"
-              if $run eval "$finalize_command"; then :
-              else
-                $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
-                continue
-              fi
-              file="$objdir/$file"T
-            else
-              $echo "$modename: warning: cannot relink \`$file' on behalf of your buggy system linker" 1>&2
-            fi
-          else
-            # Install the binary that we compiled earlier.
-	    file=`$echo "X$file" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
-          fi
-        fi
-
-        $show "$install_prog$stripme $file $dest"
-        $run eval "$install_prog\$stripme \$file \$dest" || exit $?
-        ;;
-      esac
-    done
-
-    for file in $staticlibs; do
-      name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-
-      # Set up the ranlib parameters.
-      oldlib="$destdir/$name"
-
-      $show "$install_prog $file $oldlib"
-      $run eval "$install_prog \$file \$oldlib" || exit $?
-
-      # Do each command in the postinstall commands.
-      eval cmds=\"$old_postinstall_cmds\"
-      IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=';'
-      for cmd in $cmds; do
-        IFS="$save_ifs"
-        $show "$cmd"
-        $run eval "$cmd" || exit $?
-      done
-      IFS="$save_ifs"
-    done
-
-    if test -n "$future_libdirs"; then
-      $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2
-    fi
-
-    if test -n "$current_libdirs"; then
-      # Maybe just do a dry run.
-      test -n "$run" && current_libdirs=" -n$current_libdirs"
-      exec $SHELL $0 --finish$current_libdirs
-      exit 1
-    fi
-
-    exit 0
-    ;;
-
-  # libtool finish mode
-  finish)
-    modename="$modename: finish"
-    libdirs="$nonopt"
-
-    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
-      for dir
-      do
-        libdirs="$libdirs $dir"
-      done
-
-      for libdir in $libdirs; do
-	if test -n "$finish_cmds"; then
-	  # Do each command in the finish commands.
-	  eval cmds=\"$finish_cmds\"
-          IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=';'
-          for cmd in $cmds; do
-            IFS="$save_ifs"
-            $show "$cmd"
-            $run eval "$cmd"
-          done
-          IFS="$save_ifs"
-	fi
-	if test -n "$finish_eval"; then
-	  # Do the single finish_eval.
-	  eval cmds=\"$finish_eval\"
-	  $run eval "$cmds"
-	fi
-      done
-    fi
-
-    echo "------------------------------------------------------------------------------"
-    echo "Libraries have been installed in:"
-    for libdir in $libdirs; do
-      echo "   $libdir"
-    done
-    echo
-    echo "To link against installed libraries in a given directory, LIBDIR,"
-    echo "you must use the \`-LLIBDIR' flag during linking."
-    echo
-    echo " You will also need to do one of the following:"
-    if test -n "$shlibpath_var"; then
-      echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
-      echo "     during execution"
-    fi
-    if test -n "$runpath_var"; then
-      echo "   - add LIBDIR to the \`$runpath_var' environment variable"
-      echo "     during linking"
-    fi
-    if test -n "$hardcode_libdir_flag_spec"; then
-      libdir=LIBDIR
-      eval flag=\"$hardcode_libdir_flag_spec\"
-
-      echo "   - use the \`$flag' linker flag"
-    fi
-    if test -f /etc/ld.so.conf; then
-      echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
-    fi
-    echo
-    echo "See any operating system documentation about shared libraries for"
-    echo "more information, such as the ld(1) and ld.so(8) manual pages."
-    echo "------------------------------------------------------------------------------"
-    exit 0
-    ;;
-
-  # libtool execute mode
-  execute)
-    modename="$modename: execute"
-
-    # The first argument is the command name.
-    cmd="$nonopt"
-    if test -z "$cmd"; then
-      $echo "$modename: you must specify a COMMAND" 1>&2
-      $echo "$help"
-      exit 1
-    fi
-
-    # Handle -dlopen flags immediately.
-    for file in $execute_dlfiles; do
-      if test -f "$file"; then :
-      else
-	$echo "$modename: \`$file' is not a file" 1>&2
-	$echo "$help" 1>&2
-	exit 1
-      fi
-
-      dir=
-      case "$file" in
-      *.la)
-        # Check to see that this really is a libtool archive.
-        if (sed -e '2q' $file | egrep '^# Generated by ltmain\.sh') >/dev/null 2>&1; then :
-        else
-          $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
-          $echo "$help" 1>&2
-          exit 1
-        fi
-
-	# Read the libtool library.
-	dlname=
-	library_names=
-
-        # If there is no directory component, then add one.
-	case "$file" in
-	*/* | *\\*) . $file ;;
-        *) . ./$file ;;
-	esac
-
-	# Skip this library if it cannot be dlopened.
-	if test -z "$dlname"; then
-	  # Warn if it was a shared library.
-	  test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'"
-	  continue
-	fi
-
-	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
-	test "X$dir" = "X$file" && dir=.
-
-	if test -f "$dir/$objdir/$dlname"; then
-	  dir="$dir/$objdir"
-	else
-	  $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
-	  exit 1
-	fi
-	;;
-
-      *.lo)
-	# Just add the directory containing the .lo file.
-	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
-	test "X$dir" = "X$file" && dir=.
-	;;
-
-      *)
-	$echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2
-        continue
-	;;
-      esac
-
-      # Get the absolute pathname.
-      absdir=`cd "$dir" && pwd`
-      test -n "$absdir" && dir="$absdir"
-
-      # Now add the directory to shlibpath_var.
-      if eval "test -z \"\$$shlibpath_var\""; then
-	eval "$shlibpath_var=\"\$dir\""
-      else
-	eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
-      fi
-    done
-
-    # This variable tells wrapper scripts just to set shlibpath_var
-    # rather than running their programs.
-    libtool_execute_magic="$magic"
-
-    # Check if any of the arguments is a wrapper script.
-    args=
-    for file
-    do
-      case "$file" in
-      -*) ;;
-      *)
-        # Do a test to see if this is really a libtool program.
-        if (sed -e '4q' $file | egrep '^# Generated by ltmain\.sh') >/dev/null 2>&1; then
-	  # If there is no directory component, then add one.
-	  case "$file" in
-	  */* | *\\*) . $file ;;
-	  *) . ./$file ;;
-	  esac
-
-	  # Transform arg to wrapped name.
-	  file="$progdir/$program"
-	fi
-        ;;
-      esac
-      # Quote arguments (to preserve shell metacharacters).
-      file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"`
-      args="$args \"$file\""
-    done
-
-    if test -z "$run"; then
-      # Export the shlibpath_var.
-      eval "export $shlibpath_var"
-
-      # Now actually exec the command.
-      eval "exec \$cmd$args"
-
-      $echo "$modename: cannot exec \$cmd$args"
-      exit 1
-    else
-      # Display what would be done.
-      eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
-      $echo "export $shlibpath_var"
-      $echo "$cmd$args"
-      exit 0
-    fi
-    ;;
-
-  # libtool uninstall mode
-  uninstall)
-    modename="$modename: uninstall"
-    rm="$nonopt"
-    files=
-
-    for arg
-    do
-      case "$arg" in
-      -*) rm="$rm $arg" ;;
-      *) files="$files $arg" ;;
-      esac
-    done
-
-    if test -z "$rm"; then
-      $echo "$modename: you must specify an RM program" 1>&2
-      $echo "$help" 1>&2
-      exit 1
-    fi
-
-    for file in $files; do
-      dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
-      test "X$dir" = "X$file" && dir=.
-      name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-
-      rmfiles="$file"
-
-      case "$name" in
-      *.la)
-        # Possibly a libtool archive, so verify it.
-        if (sed -e '2q' $file | egrep '^# Generated by ltmain\.sh') >/dev/null 2>&1; then
-          . $dir/$name
-
-          # Delete the libtool libraries and symlinks.
-          for n in $library_names; do
-            rmfiles="$rmfiles $dir/$n"
-            test "X$n" = "X$dlname" && dlname=
-          done
-          test -n "$dlname" && rmfiles="$rmfiles $dir/$dlname"
-          test -n "$old_library" && rmfiles="$rmfiles $dir/$old_library"
-
-	  $show "$rm $rmfiles"
-	  $run $rm $rmfiles
-
-	  if test -n "$library_names"; then
-	    # Do each command in the postuninstall commands.
-	    eval cmds=\"$postuninstall_cmds\"
-	    IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=';'
-	    for cmd in $cmds; do
-	      IFS="$save_ifs"
-	      $show "$cmd"
-	      $run eval "$cmd"
-	    done
-	    IFS="$save_ifs"
-	  fi
-
-          if test -n "$old_library"; then
-	    # Do each command in the old_postuninstall commands.
-	    eval cmds=\"$old_postuninstall_cmds\"
-	    IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=';'
-	    for cmd in $cmds; do
-	      IFS="$save_ifs"
-	      $show "$cmd"
-	      $run eval "$cmd"
-	    done
-	    IFS="$save_ifs"
-	  fi
-
-          # FIXME: should reinstall the best remaining shared library.
-        fi
-        ;;
-
-      *.lo)
-        if test "$build_old_libs" = yes; then
-          oldobj=`$echo "X$name" | $Xsed -e 's/\.lo$/\.o/'`
-          rmfiles="$rmfiles $dir/$oldobj"
-        fi
-	$show "$rm $rmfiles"
-	$run $rm $rmfiles
-        ;;
-
-      *)
-      	$show "$rm $rmfiles"
-	$run $rm $rmfiles
-	;;
-      esac
-    done
-    exit 0
-    ;;
-
-  "")
-    $echo "$modename: you must specify a MODE" 1>&2
-    $echo "$generic_help" 1>&2
-    exit 1
-    ;;
-  esac
-
-  $echo "$modename: invalid operation mode \`$mode'" 1>&2
-  $echo "$generic_help" 1>&2
-  exit 1
-fi # test -z "$show_help"
-
-# We need to display help for each of the modes.
-case "$mode" in
-"") $echo \
-"Usage: $modename [OPTION]... [MODE-ARG]...
-
-Provide generalized library-building support services.
-
--n, --dry-run         display commands without modifying any files
-    --features        display configuration information and exit
-    --finish          same as \`--mode=finish'
-    --help            display this help message and exit
-    --mode=MODE       use operation mode MODE [default=inferred from MODE-ARGS]
-    --quiet           same as \`--silent'
-    --silent          don't print informational messages
-    --version         print version information
-
-MODE must be one of the following:
-
-      compile         compile a source file into a libtool object
-      execute         automatically set library path, then run a program
-      finish          complete the installation of libtool libraries
-      install         install libraries or executables
-      link            create a library or an executable
-      uninstall       remove libraries from an installed directory
-
-MODE-ARGS vary depending on the MODE.  Try \`$modename --help --mode=MODE' for
-a more detailed description of MODE."
-  exit 0
-  ;;
-
-compile)
-  $echo \
-"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
-
-Compile a source file into a libtool library object.
-
-COMPILE-COMMAND is a command to be used in creating a \`standard' object file
-from the given SOURCEFILE.
-
-The output file name is determined by removing the directory component from
-SOURCEFILE, then substituting the C source code suffix \`.c' with the
-library object suffix, \`.lo'."
-  ;;
-
-execute)
-  $echo \
-"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]...
-
-Automatically set library path, then run a program.
-
-This mode accepts the following additional options:
-
-  -dlopen FILE      add the directory containing FILE to the library path
-
-This mode sets the library path environment variable according to \`-dlopen'
-flags.
-
-If any of the ARGS are libtool executable wrappers, then they are translated
-into their corresponding uninstalled binary, and any of their required library
-directories are added to the library path.
-
-Then, COMMAND is executed, with ARGS as arguments."
-  ;;
-
-finish)
-  $echo \
-"Usage: $modename [OPTION]... --mode=finish [LIBDIR]...
-
-Complete the installation of libtool libraries.
-
-Each LIBDIR is a directory that contains libtool libraries.
-
-The commands that this mode executes may require superuser privileges.  Use
-the \`--dry-run' option if you just want to see what would be executed."
-  ;;
-
-install)
-  $echo \
-"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND...
-
-Install executables or libraries.
-
-INSTALL-COMMAND is the installation command.  The first component should be
-either the \`install' or \`cp' program.
-
-The rest of the components are interpreted as arguments to that command (only
-BSD-compatible install options are recognized)."
-  ;;
-
-link)
-  $echo \
-"Usage: $modename [OPTION]... --mode=link LINK-COMMAND...
-
-Link object files or libraries together to form another library, or to
-create an executable program.
-
-LINK-COMMAND is a command using the C compiler that you would use to create
-a program from several object files.
-
-The following components of LINK-COMMAND are treated specially:
-
-  -all-static       do not do any dynamic linking at all
-  -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
-  -dlpreopen FILE   link in FILE and add its symbols to dld_preloaded_symbols
-  -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
-  -LLIBDIR          search LIBDIR for required installed libraries
-  -lNAME            OUTPUT-FILE requires the installed library libNAME
-  -no-undefined     declare that a library does not refer to external symbols
-  -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
-  -release RELEASE  specify package release information
-  -rpath LIBDIR     the created library will eventually be installed in LIBDIR
-  -static           do not do any dynamic linking of libtool libraries
-  -version-info CURRENT[:REVISION[:AGE]]
-                    specify library version info [each variable defaults to 0]
-
-All other options (arguments beginning with \`-') are ignored.
-
-Every other argument is treated as a filename.  Files ending in \`.la' are
-treated as uninstalled libtool libraries, other files are standard or library
-object files.
-
-If the OUTPUT-FILE ends in \`.la', then a libtool library is created, only
-library objects (\`.lo' files) may be specified, and \`-rpath' is required.
-
-If OUTPUT-FILE ends in \`.a', then a standard library is created using \`ar'
-and \`ranlib'.
-
-If OUTPUT-FILE ends in \`.lo' or \`.o', then a reloadable object file is
-created, otherwise an executable program is created."
-  ;;
-
-uninstall)
-  $echo
-"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
-
-Remove libraries from an installation directory.
-
-RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
-to RM.
-
-If FILE is a libtool library, all the files associated with it are deleted.
-Otherwise, only FILE itself is deleted using RM."
-  ;;
-
-*)
-  $echo "$modename: invalid operation mode \`$mode'" 1>&2
-  $echo "$help" 1>&2
-  exit 1
-  ;;
-esac
-
-echo
-$echo "Try \`$modename --help' for more information about other modes."
-
-exit 0
-
-# Local Variables:
-# mode:shell-script
-# sh-indentation:2
-# End:

Engine/lib/ljpeg/extras/makcjpeg.st

@@ -1,38 +0,0 @@
-; Project file for Independent JPEG Group's software
-;
-; This project file is for Atari ST/STE/TT systems using Pure C or Turbo C.
-; Thanks to Frank Moehle ([email protected]),
-; Dr. B. Setzepfandt ([email protected]),
-; and Guido Vollbeding ([email protected]).
-;
-; To use this file, rename it to cjpeg.prj.
-; If you are using Turbo C, change filenames beginning with "pc..." to "tc..."
-; Read installation instructions before trying to make the program!
-;
-;
-;      * * * Output file * * *
-cjpeg.ttp
-;
-; * * * COMPILER OPTIONS * * *  
-.C[-P]        ; absolute calls
-.C[-M]        ; and no string merging, folks
-.C[-w-cln]    ; no "constant is long" warnings
-.C[-w-par]    ; no "parameter xxxx unused"
-.C[-w-rch]    ; no "unreachable code"
-.C[-wsig]     ; warn if significant digits may be lost
-=
-; * * * * List of modules * * * * 
-pcstart.o
-cjpeg.c	(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h,jversion.h)
-cdjpeg.c	(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
-rdswitch.c	(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
-rdppm.c	(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
-rdgif.c	(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
-rdtarga.c	(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
-rdbmp.c	(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
-rdrle.c	(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
-libjpeg.lib        ; built by libjpeg.prj
-pcfltlib.lib       ; floating point library
-; the float library can be omitted if you've turned off DCT_FLOAT_SUPPORTED
-pcstdlib.lib       ; standard library
-pcextlib.lib       ; extended library

Engine/lib/ljpeg/extras/makdjpeg.st

@@ -1,38 +0,0 @@
-; Project file for Independent JPEG Group's software
-;
-; This project file is for Atari ST/STE/TT systems using Pure C or Turbo C.
-; Thanks to Frank Moehle ([email protected]),
-; Dr. B. Setzepfandt ([email protected]),
-; and Guido Vollbeding ([email protected]).
-;
-; To use this file, rename it to djpeg.prj.
-; If you are using Turbo C, change filenames beginning with "pc..." to "tc..."
-; Read installation instructions before trying to make the program!
-;
-;
-;      * * * Output file * * *
-djpeg.ttp
-;
-; * * * COMPILER OPTIONS * * *  
-.C[-P]        ; absolute calls
-.C[-M]        ; and no string merging, folks
-.C[-w-cln]    ; no "constant is long" warnings
-.C[-w-par]    ; no "parameter xxxx unused"
-.C[-w-rch]    ; no "unreachable code"
-.C[-wsig]     ; warn if significant digits may be lost
-=
-; * * * * List of modules * * * * 
-pcstart.o
-djpeg.c	(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h,jversion.h)
-cdjpeg.c	(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
-rdcolmap.c	(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
-wrppm.c	(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
-wrgif.c	(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
-wrtarga.c	(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
-wrbmp.c	(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
-wrrle.c	(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
-libjpeg.lib        ; built by libjpeg.prj
-pcfltlib.lib       ; floating point library
-; the float library can be omitted if you've turned off DCT_FLOAT_SUPPORTED
-pcstdlib.lib       ; standard library
-pcextlib.lib       ; extended library

Engine/lib/ljpeg/extras/makeapps.ds

@@ -1,828 +0,0 @@
-# Microsoft Developer Studio Generated NMAKE File, Format Version 4.20
-# ** DO NOT EDIT **
-
-# TARGTYPE "Win32 (x86) Console Application" 0x0103
-
-!IF "$(CFG)" == ""
-CFG=cjpeg - Win32
-!MESSAGE No configuration specified.  Defaulting to cjpeg - Win32.
-!ENDIF 
-
-!IF "$(CFG)" != "cjpeg - Win32" && "$(CFG)" != "djpeg - Win32" &&\
- "$(CFG)" != "jpegtran - Win32" && "$(CFG)" != "rdjpgcom - Win32" &&\
- "$(CFG)" != "wrjpgcom - Win32"
-!MESSAGE Invalid configuration "$(CFG)" specified.
-!MESSAGE You can specify a configuration when running NMAKE on this makefile
-!MESSAGE by defining the macro CFG on the command line.  For example:
-!MESSAGE 
-!MESSAGE NMAKE /f "apps.mak" CFG="cjpeg - Win32"
-!MESSAGE 
-!MESSAGE Possible choices for configuration are:
-!MESSAGE 
-!MESSAGE "cjpeg - Win32" (based on "Win32 (x86) Console Application")
-!MESSAGE "djpeg - Win32" (based on "Win32 (x86) Console Application")
-!MESSAGE "jpegtran - Win32" (based on "Win32 (x86) Console Application")
-!MESSAGE "rdjpgcom - Win32" (based on "Win32 (x86) Console Application")
-!MESSAGE "wrjpgcom - Win32" (based on "Win32 (x86) Console Application")
-!MESSAGE 
-!ERROR An invalid configuration is specified.
-!ENDIF 
-
-!IF "$(OS)" == "Windows_NT"
-NULL=
-!ELSE 
-NULL=nul
-!ENDIF 
-################################################################################
-# Begin Project
-# PROP Target_Last_Scanned "cjpeg - Win32"
-CPP=cl.exe
-RSC=rc.exe
-
-!IF  "$(CFG)" == "cjpeg - Win32"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "cjpeg\Release"
-# PROP BASE Intermediate_Dir "cjpeg\Release"
-# PROP BASE Target_Dir "cjpeg"
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "cjpeg\Release"
-# PROP Intermediate_Dir "cjpeg\Release"
-# PROP Target_Dir "cjpeg"
-OUTDIR=.\cjpeg\Release
-INTDIR=.\cjpeg\Release
-
-ALL : "$(OUTDIR)\cjpeg.exe"
-
-CLEAN : 
-	-@erase "$(INTDIR)\cjpeg.obj"
-	-@erase "$(INTDIR)\rdppm.obj"
-	-@erase "$(INTDIR)\rdgif.obj"
-	-@erase "$(INTDIR)\rdtarga.obj"
-	-@erase "$(INTDIR)\rdrle.obj"
-	-@erase "$(INTDIR)\rdbmp.obj"
-	-@erase "$(INTDIR)\rdswitch.obj"
-	-@erase "$(INTDIR)\cdjpeg.obj"
-	-@erase "$(OUTDIR)\cjpeg.exe"
-
-"$(OUTDIR)" :
-    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
-
-# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /c
-# ADD CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /c
-CPP_PROJ=/nologo /ML /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE"\
- /Fp"$(INTDIR)/cjpeg.pch" /YX /Fo"$(INTDIR)/" /c 
-CPP_OBJS=.\cjpeg\Release/
-CPP_SBRS=.\.
-# ADD BASE RSC /l 0x409 /d "NDEBUG"
-# ADD RSC /l 0x409 /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-BSC32_FLAGS=/nologo /o"$(OUTDIR)/cjpeg.bsc" 
-BSC32_SBRS= \
-	
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
-# ADD LINK32 Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
-LINK32_FLAGS=Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib\
- comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib\
- odbc32.lib odbccp32.lib /nologo /subsystem:console /incremental:no\
- /pdb:"$(OUTDIR)/cjpeg.pdb" /machine:I386 /out:"$(OUTDIR)/cjpeg.exe" 
-LINK32_OBJS= \
-	"$(INTDIR)\cjpeg.obj" \
-	"$(INTDIR)\rdppm.obj" \
-	"$(INTDIR)\rdgif.obj" \
-	"$(INTDIR)\rdtarga.obj" \
-	"$(INTDIR)\rdrle.obj" \
-	"$(INTDIR)\rdbmp.obj" \
-	"$(INTDIR)\rdswitch.obj" \
-	"$(INTDIR)\cdjpeg.obj" \
-
-
-"$(OUTDIR)\cjpeg.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
-    $(LINK32) @<<
-  $(LINK32_FLAGS) $(LINK32_OBJS)
-<<
-
-!ELSEIF  "$(CFG)" == "djpeg - Win32"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "djpeg\Release"
-# PROP BASE Intermediate_Dir "djpeg\Release"
-# PROP BASE Target_Dir "djpeg"
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "djpeg\Release"
-# PROP Intermediate_Dir "djpeg\Release"
-# PROP Target_Dir "djpeg"
-OUTDIR=.\djpeg\Release
-INTDIR=.\djpeg\Release
-
-ALL : "$(OUTDIR)\djpeg.exe"
-
-CLEAN : 
-	-@erase "$(INTDIR)\djpeg.obj"
-	-@erase "$(INTDIR)\wrppm.obj"
-	-@erase "$(INTDIR)\wrgif.obj"
-	-@erase "$(INTDIR)\wrtarga.obj"
-	-@erase "$(INTDIR)\wrrle.obj"
-	-@erase "$(INTDIR)\wrbmp.obj"
-	-@erase "$(INTDIR)\rdcolmap.obj"
-	-@erase "$(INTDIR)\cdjpeg.obj"
-	-@erase "$(OUTDIR)\djpeg.exe"
-
-"$(OUTDIR)" :
-    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
-
-# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /c
-# ADD CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /c
-CPP_PROJ=/nologo /ML /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE"\
- /Fp"$(INTDIR)/djpeg.pch" /YX /Fo"$(INTDIR)/" /c 
-CPP_OBJS=.\djpeg\Release/
-CPP_SBRS=.\.
-# ADD BASE RSC /l 0x409 /d "NDEBUG"
-# ADD RSC /l 0x409 /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-BSC32_FLAGS=/nologo /o"$(OUTDIR)/djpeg.bsc" 
-BSC32_SBRS= \
-	
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
-# ADD LINK32 Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
-LINK32_FLAGS=Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib\
- comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib\
- odbc32.lib odbccp32.lib /nologo /subsystem:console /incremental:no\
- /pdb:"$(OUTDIR)/djpeg.pdb" /machine:I386 /out:"$(OUTDIR)/djpeg.exe" 
-LINK32_OBJS= \
-	"$(INTDIR)\djpeg.obj" \
-	"$(INTDIR)\wrppm.obj" \
-	"$(INTDIR)\wrgif.obj" \
-	"$(INTDIR)\wrtarga.obj" \
-	"$(INTDIR)\wrrle.obj" \
-	"$(INTDIR)\wrbmp.obj" \
-	"$(INTDIR)\rdcolmap.obj" \
-	"$(INTDIR)\cdjpeg.obj" \
-
-
-"$(OUTDIR)\djpeg.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
-    $(LINK32) @<<
-  $(LINK32_FLAGS) $(LINK32_OBJS)
-<<
-
-!ELSEIF  "$(CFG)" == "jpegtran - Win32"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "jpegtran\Release"
-# PROP BASE Intermediate_Dir "jpegtran\Release"
-# PROP BASE Target_Dir "jpegtran"
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "jpegtran\Release"
-# PROP Intermediate_Dir "jpegtran\Release"
-# PROP Target_Dir "jpegtran"
-OUTDIR=.\jpegtran\Release
-INTDIR=.\jpegtran\Release
-
-ALL : "$(OUTDIR)\jpegtran.exe"
-
-CLEAN : 
-	-@erase "$(INTDIR)\jpegtran.obj"
-	-@erase "$(INTDIR)\rdswitch.obj"
-	-@erase "$(INTDIR)\cdjpeg.obj"
-	-@erase "$(INTDIR)\transupp.obj"
-	-@erase "$(OUTDIR)\jpegtran.exe"
-
-"$(OUTDIR)" :
-    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
-
-# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /c
-# ADD CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /c
-CPP_PROJ=/nologo /ML /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE"\
- /Fp"$(INTDIR)/jpegtran.pch" /YX /Fo"$(INTDIR)/" /c 
-CPP_OBJS=.\jpegtran\Release/
-CPP_SBRS=.\.
-# ADD BASE RSC /l 0x409 /d "NDEBUG"
-# ADD RSC /l 0x409 /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-BSC32_FLAGS=/nologo /o"$(OUTDIR)/jpegtran.bsc" 
-BSC32_SBRS= \
-	
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
-# ADD LINK32 Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
-LINK32_FLAGS=Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib\
- comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib\
- odbc32.lib odbccp32.lib /nologo /subsystem:console /incremental:no\
- /pdb:"$(OUTDIR)/jpegtran.pdb" /machine:I386 /out:"$(OUTDIR)/jpegtran.exe" 
-LINK32_OBJS= \
-	"$(INTDIR)\jpegtran.obj" \
-	"$(INTDIR)\rdswitch.obj" \
-	"$(INTDIR)\cdjpeg.obj" \
-	"$(INTDIR)\transupp.obj" \
-
-
-"$(OUTDIR)\jpegtran.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
-    $(LINK32) @<<
-  $(LINK32_FLAGS) $(LINK32_OBJS)
-<<
-
-!ELSEIF  "$(CFG)" == "rdjpgcom - Win32"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "rdjpgcom\Release"
-# PROP BASE Intermediate_Dir "rdjpgcom\Release"
-# PROP BASE Target_Dir "rdjpgcom"
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "rdjpgcom\Release"
-# PROP Intermediate_Dir "rdjpgcom\Release"
-# PROP Target_Dir "rdjpgcom"
-OUTDIR=.\rdjpgcom\Release
-INTDIR=.\rdjpgcom\Release
-
-ALL : "$(OUTDIR)\rdjpgcom.exe"
-
-CLEAN : 
-	-@erase "$(INTDIR)\rdjpgcom.obj"
-	-@erase "$(OUTDIR)\rdjpgcom.exe"
-
-"$(OUTDIR)" :
-    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
-
-# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /c
-# ADD CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /c
-CPP_PROJ=/nologo /ML /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE"\
- /Fp"$(INTDIR)/rdjpgcom.pch" /YX /Fo"$(INTDIR)/" /c 
-CPP_OBJS=.\rdjpgcom\Release/
-CPP_SBRS=.\.
-# ADD BASE RSC /l 0x409 /d "NDEBUG"
-# ADD RSC /l 0x409 /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-BSC32_FLAGS=/nologo /o"$(OUTDIR)/rdjpgcom.bsc" 
-BSC32_SBRS= \
-	
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
-# ADD LINK32 Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
-LINK32_FLAGS=Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib\
- comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib\
- odbc32.lib odbccp32.lib /nologo /subsystem:console /incremental:no\
- /pdb:"$(OUTDIR)/rdjpgcom.pdb" /machine:I386 /out:"$(OUTDIR)/rdjpgcom.exe" 
-LINK32_OBJS= \
-	"$(INTDIR)\rdjpgcom.obj"
-
-"$(OUTDIR)\rdjpgcom.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
-    $(LINK32) @<<
-  $(LINK32_FLAGS) $(LINK32_OBJS)
-<<
-
-!ELSEIF  "$(CFG)" == "wrjpgcom - Win32"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "wrjpgcom\Release"
-# PROP BASE Intermediate_Dir "wrjpgcom\Release"
-# PROP BASE Target_Dir "wrjpgcom"
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "wrjpgcom\Release"
-# PROP Intermediate_Dir "wrjpgcom\Release"
-# PROP Target_Dir "wrjpgcom"
-OUTDIR=.\wrjpgcom\Release
-INTDIR=.\wrjpgcom\Release
-
-ALL : "$(OUTDIR)\wrjpgcom.exe"
-
-CLEAN : 
-	-@erase "$(INTDIR)\wrjpgcom.obj"
-	-@erase "$(OUTDIR)\wrjpgcom.exe"
-
-"$(OUTDIR)" :
-    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
-
-# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /c
-# ADD CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /c
-CPP_PROJ=/nologo /ML /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE"\
- /Fp"$(INTDIR)/wrjpgcom.pch" /YX /Fo"$(INTDIR)/" /c 
-CPP_OBJS=.\wrjpgcom\Release/
-CPP_SBRS=.\.
-# ADD BASE RSC /l 0x409 /d "NDEBUG"
-# ADD RSC /l 0x409 /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-BSC32_FLAGS=/nologo /o"$(OUTDIR)/wrjpgcom.bsc" 
-BSC32_SBRS= \
-	
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
-# ADD LINK32 Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
-LINK32_FLAGS=Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib\
- comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib\
- odbc32.lib odbccp32.lib /nologo /subsystem:console /incremental:no\
- /pdb:"$(OUTDIR)/wrjpgcom.pdb" /machine:I386 /out:"$(OUTDIR)/wrjpgcom.exe" 
-LINK32_OBJS= \
-	"$(INTDIR)\wrjpgcom.obj"
-
-"$(OUTDIR)\wrjpgcom.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
-    $(LINK32) @<<
-  $(LINK32_FLAGS) $(LINK32_OBJS)
-<<
-
-!ENDIF 
-
-.c{$(CPP_OBJS)}.obj:
-   $(CPP) $(CPP_PROJ) $<  
-
-.cpp{$(CPP_OBJS)}.obj:
-   $(CPP) $(CPP_PROJ) $<  
-
-.cxx{$(CPP_OBJS)}.obj:
-   $(CPP) $(CPP_PROJ) $<  
-
-.c{$(CPP_SBRS)}.sbr:
-   $(CPP) $(CPP_PROJ) $<  
-
-.cpp{$(CPP_SBRS)}.sbr:
-   $(CPP) $(CPP_PROJ) $<  
-
-.cxx{$(CPP_SBRS)}.sbr:
-   $(CPP) $(CPP_PROJ) $<  
-
-################################################################################
-# Begin Target
-
-# Name "cjpeg - Win32"
-
-!IF  "$(CFG)" == "cjpeg - Win32"
-
-!ENDIF 
-
-################################################################################
-# Begin Source File
-
-SOURCE="cjpeg.c"
-DEP_CPP_CJPEG=\
-	"cdjpeg.h"\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jerror.h"\
-	"cderror.h"\
-	"jversion.h"\
-	
-
-"$(INTDIR)\cjpeg.obj" : $(SOURCE) $(DEP_CPP_CJPEG) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="cdjpeg.c"
-DEP_CPP_CDJPE=\
-	"cdjpeg.h"\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jerror.h"\
-	"cderror.h"\
-	
-
-"$(INTDIR)\cdjpeg.obj" : $(SOURCE) $(DEP_CPP_CDJPE) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="rdswitch.c"
-DEP_CPP_RDSWI=\
-	"cdjpeg.h"\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jerror.h"\
-	"cderror.h"\
-	
-
-"$(INTDIR)\rdswitch.obj" : $(SOURCE) $(DEP_CPP_RDSWI) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="rdppm.c"
-DEP_CPP_RDPPM=\
-	"cdjpeg.h"\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jerror.h"\
-	"cderror.h"\
-	
-
-"$(INTDIR)\rdppm.obj" : $(SOURCE) $(DEP_CPP_RDPPM) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="rdgif.c"
-DEP_CPP_RDGIF=\
-	"cdjpeg.h"\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jerror.h"\
-	"cderror.h"\
-	
-
-"$(INTDIR)\rdgif.obj" : $(SOURCE) $(DEP_CPP_RDGIF) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="rdtarga.c"
-DEP_CPP_RDTAR=\
-	"cdjpeg.h"\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jerror.h"\
-	"cderror.h"\
-	
-
-"$(INTDIR)\rdtarga.obj" : $(SOURCE) $(DEP_CPP_RDTAR) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="rdbmp.c"
-DEP_CPP_RDBMP=\
-	"cdjpeg.h"\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jerror.h"\
-	"cderror.h"\
-	
-
-"$(INTDIR)\rdbmp.obj" : $(SOURCE) $(DEP_CPP_RDBMP) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="rdrle.c"
-DEP_CPP_RDRLE=\
-	"cdjpeg.h"\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jerror.h"\
-	"cderror.h"\
-	
-
-"$(INTDIR)\rdrle.obj" : $(SOURCE) $(DEP_CPP_RDRLE) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-# End Target
-################################################################################
-# Begin Target
-
-# Name "djpeg - Win32"
-
-!IF  "$(CFG)" == "djpeg - Win32"
-
-!ENDIF 
-
-################################################################################
-# Begin Source File
-
-SOURCE="djpeg.c"
-DEP_CPP_DJPEG=\
-	"cdjpeg.h"\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jerror.h"\
-	"cderror.h"\
-	"jversion.h"\
-	
-
-"$(INTDIR)\djpeg.obj" : $(SOURCE) $(DEP_CPP_DJPEG) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="cdjpeg.c"
-DEP_CPP_CDJPE=\
-	"cdjpeg.h"\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jerror.h"\
-	"cderror.h"\
-	
-
-"$(INTDIR)\cdjpeg.obj" : $(SOURCE) $(DEP_CPP_CDJPE) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="rdcolmap.c"
-DEP_CPP_RDCOL=\
-	"cdjpeg.h"\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jerror.h"\
-	"cderror.h"\
-	
-
-"$(INTDIR)\rdcolmap.obj" : $(SOURCE) $(DEP_CPP_RDCOL) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="wrppm.c"
-DEP_CPP_WRPPM=\
-	"cdjpeg.h"\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jerror.h"\
-	"cderror.h"\
-	
-
-"$(INTDIR)\wrppm.obj" : $(SOURCE) $(DEP_CPP_WRPPM) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="wrgif.c"
-DEP_CPP_WRGIF=\
-	"cdjpeg.h"\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jerror.h"\
-	"cderror.h"\
-	
-
-"$(INTDIR)\wrgif.obj" : $(SOURCE) $(DEP_CPP_WRGIF) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="wrtarga.c"
-DEP_CPP_WRTAR=\
-	"cdjpeg.h"\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jerror.h"\
-	"cderror.h"\
-	
-
-"$(INTDIR)\wrtarga.obj" : $(SOURCE) $(DEP_CPP_WRTAR) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="wrbmp.c"
-DEP_CPP_WRBMP=\
-	"cdjpeg.h"\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jerror.h"\
-	"cderror.h"\
-	
-
-"$(INTDIR)\wrbmp.obj" : $(SOURCE) $(DEP_CPP_WRBMP) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="wrrle.c"
-DEP_CPP_WRRLE=\
-	"cdjpeg.h"\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jerror.h"\
-	"cderror.h"\
-	
-
-"$(INTDIR)\wrrle.obj" : $(SOURCE) $(DEP_CPP_WRRLE) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-# End Target
-################################################################################
-# Begin Target
-
-# Name "jpegtran - Win32"
-
-!IF  "$(CFG)" == "jpegtran - Win32"
-
-!ENDIF 
-
-################################################################################
-# Begin Source File
-
-SOURCE="jpegtran.c"
-DEP_CPP_JPEGT=\
-	"cdjpeg.h"\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jerror.h"\
-	"cderror.h"\
-	"transupp.h"\
-	"jversion.h"\
-	
-
-"$(INTDIR)\jpegtran.obj" : $(SOURCE) $(DEP_CPP_JPEGT) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="cdjpeg.c"
-DEP_CPP_CDJPE=\
-	"cdjpeg.h"\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jerror.h"\
-	"cderror.h"\
-	
-
-"$(INTDIR)\cdjpeg.obj" : $(SOURCE) $(DEP_CPP_CDJPE) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="rdswitch.c"
-DEP_CPP_RDSWI=\
-	"cdjpeg.h"\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jerror.h"\
-	"cderror.h"\
-	
-
-"$(INTDIR)\rdswitch.obj" : $(SOURCE) $(DEP_CPP_RDSWI) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="transupp.c"
-DEP_CPP_TRANS=\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jpegint.h"\
-	"jerror.h"\
-	"transupp.h"\
-	
-
-"$(INTDIR)\transupp.obj" : $(SOURCE) $(DEP_CPP_TRANS) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-# End Target
-################################################################################
-# Begin Target
-
-# Name "rdjpgcom - Win32"
-
-!IF  "$(CFG)" == "rdjpgcom - Win32"
-
-!ENDIF 
-
-################################################################################
-# Begin Source File
-
-SOURCE="rdjpgcom.c"
-DEP_CPP_RDJPG=\
-	"jinclude.h"\
-	"jconfig.h"\
-	
-
-"$(INTDIR)\rdjpgcom.obj" : $(SOURCE) $(DEP_CPP_RDJPG) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-# End Target
-################################################################################
-# Begin Target
-
-# Name "wrjpgcom - Win32"
-
-!IF  "$(CFG)" == "wrjpgcom - Win32"
-
-!ENDIF 
-
-################################################################################
-# Begin Source File
-
-SOURCE="wrjpgcom.c"
-DEP_CPP_WRJPG=\
-	"jinclude.h"\
-	"jconfig.h"\
-	
-
-"$(INTDIR)\wrjpgcom.obj" : $(SOURCE) $(DEP_CPP_WRJPG) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-# End Target
-# End Project
-################################################################################
-

Engine/lib/ljpeg/extras/makefile.ansi

@@ -1,214 +0,0 @@
-# Makefile for Independent JPEG Group's software
-
-# This makefile is suitable for Unix-like systems with ANSI-capable compilers.
-# If you have a non-ANSI compiler, makefile.unix is a better starting point.
-
-# Read installation instructions before saying "make" !!
-
-# The name of your C compiler:
-CC= cc
-
-# You may need to adjust these cc options:
-CFLAGS= -O
-# Generally, we recommend defining any configuration symbols in jconfig.h,
-# NOT via -D switches here.
-
-# Link-time cc options:
-LDFLAGS= 
-
-# To link any special libraries, add the necessary -l commands here.
-LDLIBS= 
-
-# Put here the object file name for the correct system-dependent memory
-# manager file.  For Unix this is usually jmemnobs.o, but you may want
-# to use jmemansi.o or jmemname.o if you have limited swap space.
-SYSDEPMEM= jmemnobs.o
-
-# miscellaneous OS-dependent stuff
-# linker
-LN= $(CC)
-# file deletion command
-RM= rm -f
-# library (.a) file creation command
-AR= ar rc
-# second step in .a creation (use "touch" if not needed)
-AR2= ranlib
-
-# End of configurable options.
-
-
-# source files: JPEG library proper
-LIBSOURCES= jcapimin.c jcapistd.c jccoefct.c jccolor.c jcdctmgr.c jchuff.c \
-        jcinit.c jcmainct.c jcmarker.c jcmaster.c jcomapi.c jcparam.c \
-        jcphuff.c jcprepct.c jcsample.c jctrans.c jdapimin.c jdapistd.c \
-        jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c jddctmgr.c jdhuff.c \
-        jdinput.c jdmainct.c jdmarker.c jdmaster.c jdmerge.c jdphuff.c \
-        jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c jfdctfst.c \
-        jfdctint.c jidctflt.c jidctfst.c jidctint.c jidctred.c jquant1.c \
-        jquant2.c jutils.c jmemmgr.c
-# memmgr back ends: compile only one of these into a working library
-SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c
-# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom
-APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \
-        rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \
-        rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c
-SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES)
-# files included by source files
-INCLUDES= jchuff.h jdhuff.h jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h \
-        jpegint.h jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h
-# documentation, test, and support files
-DOCS= README install.doc usage.doc cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \
-        wrjpgcom.1 wizard.doc example.c libjpeg.doc structure.doc \
-        coderules.doc filelist.doc change.log
-MKFILES= configure makefile.cfg makefile.ansi makefile.unix makefile.bcc \
-        makefile.mc6 makefile.dj makefile.wat makefile.vc makelib.ds \
-        makeapps.ds makeproj.mac makcjpeg.st makdjpeg.st makljpeg.st \
-        maktjpeg.st makefile.manx makefile.sas makefile.mms makefile.vms \
-        makvms.opt
-CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \
-        jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \
-        jconfig.vms
-CONFIGUREFILES= config.guess config.sub install-sh ltconfig ltmain.sh
-OTHERFILES= jconfig.doc ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm
-TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \
-        testimgp.jpg
-DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \
-        $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES)
-# library object files common to compression and decompression
-COMOBJECTS= jcomapi.o jutils.o jerror.o jmemmgr.o $(SYSDEPMEM)
-# compression library object files
-CLIBOBJECTS= jcapimin.o jcapistd.o jctrans.o jcparam.o jdatadst.o jcinit.o \
-        jcmaster.o jcmarker.o jcmainct.o jcprepct.o jccoefct.o jccolor.o \
-        jcsample.o jchuff.o jcphuff.o jcdctmgr.o jfdctfst.o jfdctflt.o \
-        jfdctint.o
-# decompression library object files
-DLIBOBJECTS= jdapimin.o jdapistd.o jdtrans.o jdatasrc.o jdmaster.o \
-        jdinput.o jdmarker.o jdhuff.o jdphuff.o jdmainct.o jdcoefct.o \
-        jdpostct.o jddctmgr.o jidctfst.o jidctflt.o jidctint.o jidctred.o \
-        jdsample.o jdcolor.o jquant1.o jquant2.o jdmerge.o
-# These objectfiles are included in libjpeg.a
-LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS)
-# object files for sample applications (excluding library files)
-COBJECTS= cjpeg.o rdppm.o rdgif.o rdtarga.o rdrle.o rdbmp.o rdswitch.o \
-        cdjpeg.o
-DOBJECTS= djpeg.o wrppm.o wrgif.o wrtarga.o wrrle.o wrbmp.o rdcolmap.o \
-        cdjpeg.o
-TROBJECTS= jpegtran.o rdswitch.o cdjpeg.o transupp.o
-
-
-all: libjpeg.a cjpeg djpeg jpegtran rdjpgcom wrjpgcom
-
-libjpeg.a: $(LIBOBJECTS)
-	$(RM) libjpeg.a
-	$(AR) libjpeg.a  $(LIBOBJECTS)
-	$(AR2) libjpeg.a
-
-cjpeg: $(COBJECTS) libjpeg.a
-	$(LN) $(LDFLAGS) -o cjpeg $(COBJECTS) libjpeg.a $(LDLIBS)
-
-djpeg: $(DOBJECTS) libjpeg.a
-	$(LN) $(LDFLAGS) -o djpeg $(DOBJECTS) libjpeg.a $(LDLIBS)
-
-jpegtran: $(TROBJECTS) libjpeg.a
-	$(LN) $(LDFLAGS) -o jpegtran $(TROBJECTS) libjpeg.a $(LDLIBS)
-
-rdjpgcom: rdjpgcom.o
-	$(LN) $(LDFLAGS) -o rdjpgcom rdjpgcom.o $(LDLIBS)
-
-wrjpgcom: wrjpgcom.o
-	$(LN) $(LDFLAGS) -o wrjpgcom wrjpgcom.o $(LDLIBS)
-
-jconfig.h: jconfig.doc
-	echo You must prepare a system-dependent jconfig.h file.
-	echo Please read the installation directions in install.doc.
-	exit 1
-
-clean:
-	$(RM) *.o cjpeg djpeg jpegtran libjpeg.a rdjpgcom wrjpgcom
-	$(RM) core testout*
-
-test: cjpeg djpeg jpegtran
-	$(RM) testout*
-	./djpeg -dct int -ppm -outfile testout.ppm  testorig.jpg
-	./djpeg -dct int -bmp -colors 256 -outfile testout.bmp  testorig.jpg
-	./cjpeg -dct int -outfile testout.jpg  testimg.ppm
-	./djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg
-	./cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm
-	./jpegtran -outfile testoutt.jpg testprog.jpg
-	cmp testimg.ppm testout.ppm
-	cmp testimg.bmp testout.bmp
-	cmp testimg.jpg testout.jpg
-	cmp testimg.ppm testoutp.ppm
-	cmp testimgp.jpg testoutp.jpg
-	cmp testorig.jpg testoutt.jpg
-
-
-jcapimin.o: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcapistd.o: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jccoefct.o: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jccolor.o: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcdctmgr.o: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jchuff.o: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h
-jcinit.o: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmainct.o: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmarker.o: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmaster.o: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcomapi.o: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcparam.o: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcphuff.o: jcphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h
-jcprepct.o: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcsample.o: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jctrans.o: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdapimin.o: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdapistd.o: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdatadst.o: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
-jdatasrc.o: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
-jdcoefct.o: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdcolor.o: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jddctmgr.o: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jdhuff.o: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h
-jdinput.o: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmainct.o: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmarker.o: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmaster.o: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmerge.o: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdphuff.o: jdphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h
-jdpostct.o: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdsample.o: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdtrans.o: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jerror.o: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h
-jfdctflt.o: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jfdctfst.o: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jfdctint.o: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctflt.o: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctfst.o: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctint.o: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctred.o: jidctred.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jquant1.o: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jquant2.o: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jutils.o: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jmemmgr.o: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemansi.o: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemname.o: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemnobs.o: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemdos.o: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemmac.o: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-cjpeg.o: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-djpeg.o: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-jpegtran.o: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h
-rdjpgcom.o: rdjpgcom.c jinclude.h jconfig.h
-wrjpgcom.o: wrjpgcom.c jinclude.h jconfig.h
-cdjpeg.o: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdcolmap.o: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdswitch.o: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-transupp.o: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h
-rdppm.o: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrppm.o: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdgif.o: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrgif.o: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdtarga.o: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrtarga.o: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdbmp.o: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrbmp.o: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdrle.o: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrrle.o: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h

Engine/lib/ljpeg/extras/makefile.bcc

@@ -1,285 +0,0 @@
-# Makefile for Independent JPEG Group's software
-
-# This makefile is suitable for Borland C on MS-DOS or OS/2.
-# It works with Borland C++ for DOS, revision 3.0 or later,
-# and has been tested with Borland C++ for OS/2.
-# Watch out for optimization bugs in the OS/2 compilers --- see notes below!
-# Thanks to Tom Wright and Ge' Weijers (original DOS) and
-# Ken Porter (OS/2) for this file.
-
-# Read installation instructions before saying "make" !!
-
-# Are we under DOS or OS/2?
-!if !$d(DOS) && !$d(OS2)
-!if $d(__OS2__)
-OS2=1
-!else
-DOS=1
-!endif
-!endif
-
-# The name of your C compiler:
-CC= bcc
-
-# You may need to adjust these cc options:
-!if $d(DOS)
-CFLAGS= -O2 -mm -w-par -w-stu -w-ccc -w-rch
-!else
-CFLAGS= -O1 -w-par -w-stu -w-ccc -w-rch
-!endif
-# -O2 enables full code optimization (for pre-3.0 Borland C++, use -O -G -Z).
-# -O2 is buggy in Borland OS/2 C++ revision 2.0, so use -O1 there for now.
-# If you have Borland OS/2 C++ revision 1.0, use -O or no optimization at all.
-# -mm selects medium memory model (near data, far code pointers; DOS only!)
-# -w-par suppresses warnings about unused function parameters
-# -w-stu suppresses warnings about incomplete structures
-# -w-ccc suppresses warnings about compile-time-constant conditions
-# -w-rch suppresses warnings about unreachable code
-# Generally, we recommend defining any configuration symbols in jconfig.h,
-# NOT via -D switches here.
-
-# Link-time cc options:
-!if $d(DOS)
-LDFLAGS= -mm
-# memory model option here must match CFLAGS!
-!else
-LDFLAGS=
-# -lai full-screen app
-# -lc case-significant link
-!endif
-
-# Put here the object file name for the correct system-dependent memory
-# manager file.
-# For DOS, we recommend jmemdos.c and jmemdosa.asm.
-# For OS/2, we recommend jmemnobs.c (flat memory!)
-# SYSDEPMEMLIB must list the same files with "+" signs for the librarian.
-!if $d(DOS)
-SYSDEPMEM= jmemdos.obj jmemdosa.obj
-SYSDEPMEMLIB= +jmemdos.obj +jmemdosa.obj
-!else
-SYSDEPMEM= jmemnobs.obj
-SYSDEPMEMLIB= +jmemnobs.obj
-!endif
-
-# End of configurable options.
-
-
-# source files: JPEG library proper
-LIBSOURCES= jcapimin.c jcapistd.c jccoefct.c jccolor.c jcdctmgr.c jchuff.c \
-        jcinit.c jcmainct.c jcmarker.c jcmaster.c jcomapi.c jcparam.c \
-        jcphuff.c jcprepct.c jcsample.c jctrans.c jdapimin.c jdapistd.c \
-        jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c jddctmgr.c jdhuff.c \
-        jdinput.c jdmainct.c jdmarker.c jdmaster.c jdmerge.c jdphuff.c \
-        jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c jfdctfst.c \
-        jfdctint.c jidctflt.c jidctfst.c jidctint.c jidctred.c jquant1.c \
-        jquant2.c jutils.c jmemmgr.c
-# memmgr back ends: compile only one of these into a working library
-SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c
-# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom
-APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \
-        rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \
-        rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c
-SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES)
-# files included by source files
-INCLUDES= jchuff.h jdhuff.h jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h \
-        jpegint.h jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h
-# documentation, test, and support files
-DOCS= README install.doc usage.doc cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \
-        wrjpgcom.1 wizard.doc example.c libjpeg.doc structure.doc \
-        coderules.doc filelist.doc change.log
-MKFILES= configure makefile.cfg makefile.ansi makefile.unix makefile.bcc \
-        makefile.mc6 makefile.dj makefile.wat makefile.vc makelib.ds \
-        makeapps.ds makeproj.mac makcjpeg.st makdjpeg.st makljpeg.st \
-        maktjpeg.st makefile.manx makefile.sas makefile.mms makefile.vms \
-        makvms.opt
-CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \
-        jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \
-        jconfig.vms
-CONFIGUREFILES= config.guess config.sub install-sh ltconfig ltmain.sh
-OTHERFILES= jconfig.doc ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm
-TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \
-        testimgp.jpg
-DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \
-        $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES)
-# library object files common to compression and decompression
-COMOBJECTS= jcomapi.obj jutils.obj jerror.obj jmemmgr.obj $(SYSDEPMEM)
-# compression library object files
-CLIBOBJECTS= jcapimin.obj jcapistd.obj jctrans.obj jcparam.obj jdatadst.obj \
-        jcinit.obj jcmaster.obj jcmarker.obj jcmainct.obj jcprepct.obj \
-        jccoefct.obj jccolor.obj jcsample.obj jchuff.obj jcphuff.obj \
-        jcdctmgr.obj jfdctfst.obj jfdctflt.obj jfdctint.obj
-# decompression library object files
-DLIBOBJECTS= jdapimin.obj jdapistd.obj jdtrans.obj jdatasrc.obj \
-        jdmaster.obj jdinput.obj jdmarker.obj jdhuff.obj jdphuff.obj \
-        jdmainct.obj jdcoefct.obj jdpostct.obj jddctmgr.obj jidctfst.obj \
-        jidctflt.obj jidctint.obj jidctred.obj jdsample.obj jdcolor.obj \
-        jquant1.obj jquant2.obj jdmerge.obj
-# These objectfiles are included in libjpeg.lib
-LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS)
-# object files for sample applications (excluding library files)
-COBJECTS= cjpeg.obj rdppm.obj rdgif.obj rdtarga.obj rdrle.obj rdbmp.obj \
-        rdswitch.obj cdjpeg.obj
-DOBJECTS= djpeg.obj wrppm.obj wrgif.obj wrtarga.obj wrrle.obj wrbmp.obj \
-        rdcolmap.obj cdjpeg.obj
-TROBJECTS= jpegtran.obj rdswitch.obj cdjpeg.obj transupp.obj
-
-
-all: libjpeg.lib cjpeg.exe djpeg.exe jpegtran.exe rdjpgcom.exe wrjpgcom.exe
-
-libjpeg.lib: $(LIBOBJECTS)
-	- del libjpeg.lib
-	tlib libjpeg.lib /E /C @&&|
-+jcapimin.obj +jcapistd.obj +jctrans.obj +jcparam.obj +jdatadst.obj &
-+jcinit.obj +jcmaster.obj +jcmarker.obj +jcmainct.obj +jcprepct.obj &
-+jccoefct.obj +jccolor.obj +jcsample.obj +jchuff.obj +jcphuff.obj &
-+jcdctmgr.obj +jfdctfst.obj +jfdctflt.obj +jfdctint.obj +jdapimin.obj &
-+jdapistd.obj +jdtrans.obj +jdatasrc.obj +jdmaster.obj +jdinput.obj &
-+jdmarker.obj +jdhuff.obj +jdphuff.obj +jdmainct.obj +jdcoefct.obj &
-+jdpostct.obj +jddctmgr.obj +jidctfst.obj +jidctflt.obj +jidctint.obj &
-+jidctred.obj +jdsample.obj +jdcolor.obj +jquant1.obj +jquant2.obj &
-+jdmerge.obj +jcomapi.obj +jutils.obj +jerror.obj +jmemmgr.obj &
-$(SYSDEPMEMLIB)
-|
-
-cjpeg.exe: $(COBJECTS) libjpeg.lib
-	$(CC) $(LDFLAGS) -ecjpeg.exe $(COBJECTS) libjpeg.lib
-
-djpeg.exe: $(DOBJECTS) libjpeg.lib
-	$(CC) $(LDFLAGS) -edjpeg.exe $(DOBJECTS) libjpeg.lib
-
-jpegtran.exe: $(TROBJECTS) libjpeg.lib
-	$(CC) $(LDFLAGS) -ejpegtran.exe $(TROBJECTS) libjpeg.lib
-
-rdjpgcom.exe: rdjpgcom.c
-!if $d(DOS)
-	$(CC) -ms -O rdjpgcom.c
-!else
-	$(CC) $(CFLAGS) rdjpgcom.c
-!endif
-
-# On DOS, wrjpgcom needs large model so it can malloc a 64K chunk
-wrjpgcom.exe: wrjpgcom.c
-!if $d(DOS)
-	$(CC) -ml -O wrjpgcom.c
-!else
-	$(CC) $(CFLAGS) wrjpgcom.c
-!endif
-
-# This "{}" syntax allows Borland Make to "batch" source files.
-# In this way, each run of the compiler can build many modules.
-.c.obj:
-	$(CC) $(CFLAGS) -c{ $<}
-
-jconfig.h: jconfig.doc
-	echo You must prepare a system-dependent jconfig.h file.
-	echo Please read the installation directions in install.doc.
-	exit 1
-
-clean:
-	- del *.obj
-	- del libjpeg.lib
-	- del cjpeg.exe
-	- del djpeg.exe
-	- del jpegtran.exe
-	- del rdjpgcom.exe
-	- del wrjpgcom.exe
-	- del testout*.*
-
-test: cjpeg.exe djpeg.exe jpegtran.exe
-	- del testout*.*
-	djpeg -dct int -ppm -outfile testout.ppm  testorig.jpg
-	djpeg -dct int -bmp -colors 256 -outfile testout.bmp  testorig.jpg
-	cjpeg -dct int -outfile testout.jpg  testimg.ppm
-	djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg
-	cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm
-	jpegtran -outfile testoutt.jpg testprog.jpg
-!if $d(DOS)
-	fc /b testimg.ppm testout.ppm
-	fc /b testimg.bmp testout.bmp
-	fc /b testimg.jpg testout.jpg
-	fc /b testimg.ppm testoutp.ppm
-	fc /b testimgp.jpg testoutp.jpg
-	fc /b testorig.jpg testoutt.jpg
-!else
-	echo n > n.tmp
-	comp testimg.ppm testout.ppm < n.tmp
-	comp testimg.bmp testout.bmp < n.tmp
-	comp testimg.jpg testout.jpg < n.tmp
-	comp testimg.ppm testoutp.ppm < n.tmp
-	comp testimgp.jpg testoutp.jpg < n.tmp
-	comp testorig.jpg testoutt.jpg < n.tmp
-	del n.tmp
-!endif
-
-
-jcapimin.obj: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcapistd.obj: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jccoefct.obj: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jccolor.obj: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcdctmgr.obj: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jchuff.obj: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h
-jcinit.obj: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmainct.obj: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmarker.obj: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmaster.obj: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcomapi.obj: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcparam.obj: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcphuff.obj: jcphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h
-jcprepct.obj: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcsample.obj: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jctrans.obj: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdapimin.obj: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdapistd.obj: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdatadst.obj: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
-jdatasrc.obj: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
-jdcoefct.obj: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdcolor.obj: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jddctmgr.obj: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jdhuff.obj: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h
-jdinput.obj: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmainct.obj: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmarker.obj: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmaster.obj: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmerge.obj: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdphuff.obj: jdphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h
-jdpostct.obj: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdsample.obj: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdtrans.obj: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jerror.obj: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h
-jfdctflt.obj: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jfdctfst.obj: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jfdctint.obj: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctflt.obj: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctfst.obj: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctint.obj: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctred.obj: jidctred.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jquant1.obj: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jquant2.obj: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jutils.obj: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jmemmgr.obj: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemansi.obj: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemname.obj: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemnobs.obj: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemdos.obj: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemmac.obj: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-cjpeg.obj: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-djpeg.obj: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-jpegtran.obj: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h
-rdjpgcom.obj: rdjpgcom.c jinclude.h jconfig.h
-wrjpgcom.obj: wrjpgcom.c jinclude.h jconfig.h
-cdjpeg.obj: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdcolmap.obj: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdswitch.obj: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-transupp.obj: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h
-rdppm.obj: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrppm.obj: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdgif.obj: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrgif.obj: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdtarga.obj: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrtarga.obj: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdbmp.obj: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrbmp.obj: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdrle.obj: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrrle.obj: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-jmemdosa.obj: jmemdosa.asm
-	tasm /mx jmemdosa.asm

Engine/lib/ljpeg/extras/makefile.cfg

@@ -1,319 +0,0 @@
-# Makefile for Independent JPEG Group's software
-
-# makefile.cfg is edited by configure to produce a custom Makefile.
-
-# Read installation instructions before saying "make" !!
-
-# For compiling with source and object files in different directories.
-srcdir = @srcdir@
-VPATH = @srcdir@
-
-# Where to install the programs and man pages.
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-bindir = $(exec_prefix)/bin
-libdir = $(exec_prefix)/lib
-includedir = $(prefix)/include
-binprefix =
-manprefix =
-manext = 1
-mandir = $(prefix)/man/man$(manext)
-
-# The name of your C compiler:
-CC= @CC@
-
-# You may need to adjust these cc options:
-CFLAGS= @CFLAGS@ @CPPFLAGS@ @INCLUDEFLAGS@
-# Generally, we recommend defining any configuration symbols in jconfig.h,
-# NOT via -D switches here.
-# However, any special defines for ansi2knr.c may be included here:
-ANSI2KNRFLAGS= @ANSI2KNRFLAGS@
-
-# Link-time cc options:
-LDFLAGS= @LDFLAGS@
-
-# To link any special libraries, add the necessary -l commands here.
-LDLIBS= @LIBS@
-
-# If using GNU libtool, LIBTOOL references it; if not, LIBTOOL is empty.
-LIBTOOL = @LIBTOOL@
-# $(O) expands to "lo" if using libtool, plain "o" if not.
-# Similarly, $(A) expands to "la" or "a".
-O = @O@
-A = @A@
-
-# Library version ID; libtool uses this for the shared library version number.
-# Note: we suggest this match the macro of the same name in jpeglib.h.
-JPEG_LIB_VERSION = @JPEG_LIB_VERSION@
-
-# Put here the object file name for the correct system-dependent memory
-# manager file.  For Unix this is usually jmemnobs.o, but you may want
-# to use jmemansi.o or jmemname.o if you have limited swap space.
-SYSDEPMEM= @MEMORYMGR@
-
-# miscellaneous OS-dependent stuff
-SHELL= /bin/sh
-# linker
-LN= @LN@
-# file deletion command
-RM= rm -f
-# directory creation command
-MKDIR= mkdir
-# library (.a) file creation command
-AR= ar rc
-# second step in .a creation (use "touch" if not needed)
-AR2= @RANLIB@
-# installation program
-INSTALL= @INSTALL@
-INSTALL_PROGRAM= @INSTALL_PROGRAM@
-INSTALL_LIB= @INSTALL_LIB@
-INSTALL_DATA= @INSTALL_DATA@
-
-# End of configurable options.
-
-
-# source files: JPEG library proper
-LIBSOURCES= jcapimin.c jcapistd.c jccoefct.c jccolor.c jcdctmgr.c jchuff.c \
-        jcinit.c jcmainct.c jcmarker.c jcmaster.c jcomapi.c jcparam.c \
-        jcphuff.c jcprepct.c jcsample.c jctrans.c jdapimin.c jdapistd.c \
-        jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c jddctmgr.c jdhuff.c \
-        jdinput.c jdmainct.c jdmarker.c jdmaster.c jdmerge.c jdphuff.c \
-        jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c jfdctfst.c \
-        jfdctint.c jidctflt.c jidctfst.c jidctint.c jidctred.c jquant1.c \
-        jquant2.c jutils.c jmemmgr.c
-# memmgr back ends: compile only one of these into a working library
-SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c
-# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom
-APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \
-        rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \
-        rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c
-SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES)
-# files included by source files
-INCLUDES= jchuff.h jdhuff.h jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h \
-        jpegint.h jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h
-# documentation, test, and support files
-DOCS= README install.doc usage.doc cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \
-        wrjpgcom.1 wizard.doc example.c libjpeg.doc structure.doc \
-        coderules.doc filelist.doc change.log
-MKFILES= configure makefile.cfg makefile.ansi makefile.unix makefile.bcc \
-        makefile.mc6 makefile.dj makefile.wat makefile.vc makelib.ds \
-        makeapps.ds makeproj.mac makcjpeg.st makdjpeg.st makljpeg.st \
-        maktjpeg.st makefile.manx makefile.sas makefile.mms makefile.vms \
-        makvms.opt
-CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \
-        jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \
-        jconfig.vms
-CONFIGUREFILES= config.guess config.sub install-sh ltconfig ltmain.sh
-OTHERFILES= jconfig.doc ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm
-TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \
-        testimgp.jpg
-DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \
-        $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES)
-# library object files common to compression and decompression
-COMOBJECTS= jcomapi.$(O) jutils.$(O) jerror.$(O) jmemmgr.$(O) $(SYSDEPMEM)
-# compression library object files
-CLIBOBJECTS= jcapimin.$(O) jcapistd.$(O) jctrans.$(O) jcparam.$(O) \
-        jdatadst.$(O) jcinit.$(O) jcmaster.$(O) jcmarker.$(O) jcmainct.$(O) \
-        jcprepct.$(O) jccoefct.$(O) jccolor.$(O) jcsample.$(O) jchuff.$(O) \
-        jcphuff.$(O) jcdctmgr.$(O) jfdctfst.$(O) jfdctflt.$(O) \
-        jfdctint.$(O)
-# decompression library object files
-DLIBOBJECTS= jdapimin.$(O) jdapistd.$(O) jdtrans.$(O) jdatasrc.$(O) \
-        jdmaster.$(O) jdinput.$(O) jdmarker.$(O) jdhuff.$(O) jdphuff.$(O) \
-        jdmainct.$(O) jdcoefct.$(O) jdpostct.$(O) jddctmgr.$(O) \
-        jidctfst.$(O) jidctflt.$(O) jidctint.$(O) jidctred.$(O) \
-        jdsample.$(O) jdcolor.$(O) jquant1.$(O) jquant2.$(O) jdmerge.$(O)
-# These objectfiles are included in libjpeg.a
-LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS)
-# object files for sample applications (excluding library files)
-COBJECTS= cjpeg.$(O) rdppm.$(O) rdgif.$(O) rdtarga.$(O) rdrle.$(O) \
-        rdbmp.$(O) rdswitch.$(O) cdjpeg.$(O)
-DOBJECTS= djpeg.$(O) wrppm.$(O) wrgif.$(O) wrtarga.$(O) wrrle.$(O) \
-        wrbmp.$(O) rdcolmap.$(O) cdjpeg.$(O)
-TROBJECTS= jpegtran.$(O) rdswitch.$(O) cdjpeg.$(O) transupp.$(O)
-
-
-all: @A2K_DEPS@ libjpeg.$(A) cjpeg djpeg jpegtran rdjpgcom wrjpgcom
-
-# Special compilation rules to support ansi2knr and libtool.
-.SUFFIXES: .lo .la
-
-# How to compile with libtool.
-@[email protected]:
-@COM_LT@	$(LIBTOOL) --mode=compile $(CC) $(CFLAGS) -c $(srcdir)/$*.c
-
-# How to use ansi2knr, when not using libtool.
-@[email protected]:
-@COM_A2K@	./ansi2knr $(srcdir)/$*.c knr/$*.c
-@COM_A2K@	$(CC) $(CFLAGS) -c knr/$*.c
-@COM_A2K@	$(RM) knr/$*.c
-
-# How to use ansi2knr AND libtool.
-@[email protected]:
-@COM_A2K@	./ansi2knr $(srcdir)/$*.c knr/$*.c
-@COM_A2K@	$(LIBTOOL) --mode=compile $(CC) $(CFLAGS) -c knr/$*.c
-@COM_A2K@	$(RM) knr/$*.c
-
-ansi2knr: ansi2knr.c
-	$(CC) $(CFLAGS) $(ANSI2KNRFLAGS) -o ansi2knr $(srcdir)/ansi2knr.c
-	$(MKDIR) knr
-
-# the library:
-
-# without libtool:
-libjpeg.a: @A2K_DEPS@ $(LIBOBJECTS)
-	$(RM) libjpeg.a
-	$(AR) libjpeg.a  $(LIBOBJECTS)
-	$(AR2) libjpeg.a
-
-# with libtool:
-libjpeg.la: @A2K_DEPS@ $(LIBOBJECTS)
-	$(LIBTOOL) --mode=link $(CC) -o libjpeg.la $(LIBOBJECTS) \
-		-rpath $(libdir) -version-info $(JPEG_LIB_VERSION)
-
-# sample programs:
-
-cjpeg: $(COBJECTS) libjpeg.$(A)
-	$(LN) $(LDFLAGS) -o cjpeg $(COBJECTS) libjpeg.$(A) $(LDLIBS)
-
-djpeg: $(DOBJECTS) libjpeg.$(A)
-	$(LN) $(LDFLAGS) -o djpeg $(DOBJECTS) libjpeg.$(A) $(LDLIBS)
-
-jpegtran: $(TROBJECTS) libjpeg.$(A)
-	$(LN) $(LDFLAGS) -o jpegtran $(TROBJECTS) libjpeg.$(A) $(LDLIBS)
-
-rdjpgcom: rdjpgcom.$(O)
-	$(LN) $(LDFLAGS) -o rdjpgcom rdjpgcom.$(O) $(LDLIBS)
-
-wrjpgcom: wrjpgcom.$(O)
-	$(LN) $(LDFLAGS) -o wrjpgcom wrjpgcom.$(O) $(LDLIBS)
-
-# Installation rules:
-
-install: cjpeg djpeg jpegtran rdjpgcom wrjpgcom @FORCE_INSTALL_LIB@
-	$(INSTALL_PROGRAM) cjpeg $(bindir)/$(binprefix)cjpeg
-	$(INSTALL_PROGRAM) djpeg $(bindir)/$(binprefix)djpeg
-	$(INSTALL_PROGRAM) jpegtran $(bindir)/$(binprefix)jpegtran
-	$(INSTALL_PROGRAM) rdjpgcom $(bindir)/$(binprefix)rdjpgcom
-	$(INSTALL_PROGRAM) wrjpgcom $(bindir)/$(binprefix)wrjpgcom
-	$(INSTALL_DATA) $(srcdir)/cjpeg.1 $(mandir)/$(manprefix)cjpeg.$(manext)
-	$(INSTALL_DATA) $(srcdir)/djpeg.1 $(mandir)/$(manprefix)djpeg.$(manext)
-	$(INSTALL_DATA) $(srcdir)/jpegtran.1 $(mandir)/$(manprefix)jpegtran.$(manext)
-	$(INSTALL_DATA) $(srcdir)/rdjpgcom.1 $(mandir)/$(manprefix)rdjpgcom.$(manext)
-	$(INSTALL_DATA) $(srcdir)/wrjpgcom.1 $(mandir)/$(manprefix)wrjpgcom.$(manext)
-
-install-lib: libjpeg.$(A) install-headers
-	$(INSTALL_LIB) libjpeg.$(A) $(libdir)/$(binprefix)libjpeg.$(A)
-
-install-headers: jconfig.h
-	$(INSTALL_DATA) jconfig.h $(includedir)/jconfig.h
-	$(INSTALL_DATA) $(srcdir)/jpeglib.h $(includedir)/jpeglib.h
-	$(INSTALL_DATA) $(srcdir)/jmorecfg.h $(includedir)/jmorecfg.h
-	$(INSTALL_DATA) $(srcdir)/jerror.h $(includedir)/jerror.h
-
-clean:
-	$(RM) *.o *.lo libjpeg.a libjpeg.la
-	$(RM) cjpeg djpeg jpegtran rdjpgcom wrjpgcom
-	$(RM) ansi2knr core testout* config.log config.status
-	$(RM) -r knr .libs _libs
-
-distclean: clean
-	$(RM) Makefile jconfig.h libtool config.cache
-
-test: cjpeg djpeg jpegtran
-	$(RM) testout*
-	./djpeg -dct int -ppm -outfile testout.ppm  $(srcdir)/testorig.jpg
-	./djpeg -dct int -bmp -colors 256 -outfile testout.bmp  $(srcdir)/testorig.jpg
-	./cjpeg -dct int -outfile testout.jpg  $(srcdir)/testimg.ppm
-	./djpeg -dct int -ppm -outfile testoutp.ppm $(srcdir)/testprog.jpg
-	./cjpeg -dct int -progressive -opt -outfile testoutp.jpg $(srcdir)/testimg.ppm
-	./jpegtran -outfile testoutt.jpg $(srcdir)/testprog.jpg
-	cmp $(srcdir)/testimg.ppm testout.ppm
-	cmp $(srcdir)/testimg.bmp testout.bmp
-	cmp $(srcdir)/testimg.jpg testout.jpg
-	cmp $(srcdir)/testimg.ppm testoutp.ppm
-	cmp $(srcdir)/testimgp.jpg testoutp.jpg
-	cmp $(srcdir)/testorig.jpg testoutt.jpg
-
-check: test
-
-# Mistake catcher:
-
-jconfig.h: jconfig.doc
-	echo You must prepare a system-dependent jconfig.h file.
-	echo Please read the installation directions in install.doc.
-	exit 1
-
-# GNU Make likes to know which target names are not really files to be made:
-.PHONY: all install install-lib install-headers clean distclean test check
-
-
-jcapimin.$(O): jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcapistd.$(O): jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jccoefct.$(O): jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jccolor.$(O): jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcdctmgr.$(O): jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jchuff.$(O): jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h
-jcinit.$(O): jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmainct.$(O): jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmarker.$(O): jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmaster.$(O): jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcomapi.$(O): jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcparam.$(O): jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcphuff.$(O): jcphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h
-jcprepct.$(O): jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcsample.$(O): jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jctrans.$(O): jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdapimin.$(O): jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdapistd.$(O): jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdatadst.$(O): jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
-jdatasrc.$(O): jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
-jdcoefct.$(O): jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdcolor.$(O): jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jddctmgr.$(O): jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jdhuff.$(O): jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h
-jdinput.$(O): jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmainct.$(O): jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmarker.$(O): jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmaster.$(O): jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmerge.$(O): jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdphuff.$(O): jdphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h
-jdpostct.$(O): jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdsample.$(O): jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdtrans.$(O): jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jerror.$(O): jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h
-jfdctflt.$(O): jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jfdctfst.$(O): jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jfdctint.$(O): jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctflt.$(O): jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctfst.$(O): jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctint.$(O): jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctred.$(O): jidctred.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jquant1.$(O): jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jquant2.$(O): jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jutils.$(O): jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jmemmgr.$(O): jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemansi.$(O): jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemname.$(O): jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemnobs.$(O): jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemdos.$(O): jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemmac.$(O): jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-cjpeg.$(O): cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-djpeg.$(O): djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-jpegtran.$(O): jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h
-rdjpgcom.$(O): rdjpgcom.c jinclude.h jconfig.h
-wrjpgcom.$(O): wrjpgcom.c jinclude.h jconfig.h
-cdjpeg.$(O): cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdcolmap.$(O): rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdswitch.$(O): rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-transupp.$(O): transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h
-rdppm.$(O): rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrppm.$(O): wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdgif.$(O): rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrgif.$(O): wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdtarga.$(O): rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrtarga.$(O): wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdbmp.$(O): rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrbmp.$(O): wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdrle.$(O): rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrrle.$(O): wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h

Engine/lib/ljpeg/extras/makefile.dj

@@ -1,220 +0,0 @@
-# Makefile for Independent JPEG Group's software
-
-# This makefile is for DJGPP (Delorie's GNU C port on MS-DOS), v2.0 or later.
-# Thanks to Frank J. Donahoe for this version.
-
-# Read installation instructions before saying "make" !!
-
-# The name of your C compiler:
-CC= gcc
-
-# You may need to adjust these cc options:
-CFLAGS= -O2 -Wall -I.
-# Generally, we recommend defining any configuration symbols in jconfig.h,
-# NOT via -D switches here.
-
-# Link-time cc options:
-LDFLAGS= -s
-
-# To link any special libraries, add the necessary -l commands here.
-LDLIBS= 
-
-# Put here the object file name for the correct system-dependent memory
-# manager file.  For DJGPP this is usually jmemnobs.o, but you could
-# use jmemname.o if you want to use named temp files instead of swap space.
-SYSDEPMEM= jmemnobs.o
-
-# miscellaneous OS-dependent stuff
-# linker
-LN= $(CC)
-# file deletion command
-RM= del
-# library (.a) file creation command
-AR= ar rc
-# second step in .a creation (use "touch" if not needed)
-AR2= ranlib
-
-# End of configurable options.
-
-
-# source files: JPEG library proper
-LIBSOURCES= jcapimin.c jcapistd.c jccoefct.c jccolor.c jcdctmgr.c jchuff.c \
-        jcinit.c jcmainct.c jcmarker.c jcmaster.c jcomapi.c jcparam.c \
-        jcphuff.c jcprepct.c jcsample.c jctrans.c jdapimin.c jdapistd.c \
-        jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c jddctmgr.c jdhuff.c \
-        jdinput.c jdmainct.c jdmarker.c jdmaster.c jdmerge.c jdphuff.c \
-        jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c jfdctfst.c \
-        jfdctint.c jidctflt.c jidctfst.c jidctint.c jidctred.c jquant1.c \
-        jquant2.c jutils.c jmemmgr.c
-# memmgr back ends: compile only one of these into a working library
-SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c
-# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom
-APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \
-        rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \
-        rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c
-SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES)
-# files included by source files
-INCLUDES= jchuff.h jdhuff.h jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h \
-        jpegint.h jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h
-# documentation, test, and support files
-DOCS= README install.doc usage.doc cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \
-        wrjpgcom.1 wizard.doc example.c libjpeg.doc structure.doc \
-        coderules.doc filelist.doc change.log
-MKFILES= configure makefile.cfg makefile.ansi makefile.unix makefile.bcc \
-        makefile.mc6 makefile.dj makefile.wat makefile.vc makelib.ds \
-        makeapps.ds makeproj.mac makcjpeg.st makdjpeg.st makljpeg.st \
-        maktjpeg.st makefile.manx makefile.sas makefile.mms makefile.vms \
-        makvms.opt
-CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \
-        jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \
-        jconfig.vms
-CONFIGUREFILES= config.guess config.sub install-sh ltconfig ltmain.sh
-OTHERFILES= jconfig.doc ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm
-TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \
-        testimgp.jpg
-DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \
-        $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES)
-# library object files common to compression and decompression
-COMOBJECTS= jcomapi.o jutils.o jerror.o jmemmgr.o $(SYSDEPMEM)
-# compression library object files
-CLIBOBJECTS= jcapimin.o jcapistd.o jctrans.o jcparam.o jdatadst.o jcinit.o \
-        jcmaster.o jcmarker.o jcmainct.o jcprepct.o jccoefct.o jccolor.o \
-        jcsample.o jchuff.o jcphuff.o jcdctmgr.o jfdctfst.o jfdctflt.o \
-        jfdctint.o
-# decompression library object files
-DLIBOBJECTS= jdapimin.o jdapistd.o jdtrans.o jdatasrc.o jdmaster.o \
-        jdinput.o jdmarker.o jdhuff.o jdphuff.o jdmainct.o jdcoefct.o \
-        jdpostct.o jddctmgr.o jidctfst.o jidctflt.o jidctint.o jidctred.o \
-        jdsample.o jdcolor.o jquant1.o jquant2.o jdmerge.o
-# These objectfiles are included in libjpeg.a
-LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS)
-# object files for sample applications (excluding library files)
-COBJECTS= cjpeg.o rdppm.o rdgif.o rdtarga.o rdrle.o rdbmp.o rdswitch.o \
-        cdjpeg.o
-DOBJECTS= djpeg.o wrppm.o wrgif.o wrtarga.o wrrle.o wrbmp.o rdcolmap.o \
-        cdjpeg.o
-TROBJECTS= jpegtran.o rdswitch.o cdjpeg.o transupp.o
-
-
-all: libjpeg.a cjpeg.exe djpeg.exe jpegtran.exe rdjpgcom.exe wrjpgcom.exe
-
-libjpeg.a: $(LIBOBJECTS)
-	$(RM) libjpeg.a
-	$(AR) libjpeg.a  $(LIBOBJECTS)
-	$(AR2) libjpeg.a
-
-cjpeg.exe: $(COBJECTS) libjpeg.a
-	$(LN) $(LDFLAGS) -o cjpeg.exe $(COBJECTS) libjpeg.a $(LDLIBS)
-
-djpeg.exe: $(DOBJECTS) libjpeg.a
-	$(LN) $(LDFLAGS) -o djpeg.exe $(DOBJECTS) libjpeg.a $(LDLIBS)
-
-jpegtran.exe: $(TROBJECTS) libjpeg.a
-	$(LN) $(LDFLAGS) -o jpegtran.exe $(TROBJECTS) libjpeg.a $(LDLIBS)
-
-rdjpgcom.exe: rdjpgcom.o
-	$(LN) $(LDFLAGS) -o rdjpgcom.exe rdjpgcom.o $(LDLIBS)
-
-wrjpgcom.exe: wrjpgcom.o
-	$(LN) $(LDFLAGS) -o wrjpgcom.exe wrjpgcom.o $(LDLIBS)
-
-jconfig.h: jconfig.doc
-	echo You must prepare a system-dependent jconfig.h file.
-	echo Please read the installation directions in install.doc.
-	exit 1
-
-clean:
-	$(RM) *.o
-	$(RM) cjpeg.exe
-	$(RM) djpeg.exe
-	$(RM) jpegtran.exe
-	$(RM) rdjpgcom.exe
-	$(RM) wrjpgcom.exe
-	$(RM) libjpeg.a
-	$(RM) testout*.*
-
-test: cjpeg.exe djpeg.exe jpegtran.exe
-	$(RM) testout*.*
-	./djpeg -dct int -ppm -outfile testout.ppm  testorig.jpg
-	./djpeg -dct int -bmp -colors 256 -outfile testout.bmp  testorig.jpg
-	./cjpeg -dct int -outfile testout.jpg  testimg.ppm
-	./djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg
-	./cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm
-	./jpegtran -outfile testoutt.jpg testprog.jpg
-	fc /b testimg.ppm testout.ppm
-	fc /b testimg.bmp testout.bmp
-	fc /b testimg.jpg testout.jpg
-	fc /b testimg.ppm testoutp.ppm
-	fc /b testimgp.jpg testoutp.jpg
-	fc /b testorig.jpg testoutt.jpg
-
-
-jcapimin.o: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcapistd.o: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jccoefct.o: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jccolor.o: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcdctmgr.o: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jchuff.o: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h
-jcinit.o: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmainct.o: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmarker.o: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmaster.o: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcomapi.o: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcparam.o: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcphuff.o: jcphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h
-jcprepct.o: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcsample.o: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jctrans.o: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdapimin.o: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdapistd.o: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdatadst.o: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
-jdatasrc.o: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
-jdcoefct.o: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdcolor.o: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jddctmgr.o: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jdhuff.o: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h
-jdinput.o: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmainct.o: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmarker.o: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmaster.o: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmerge.o: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdphuff.o: jdphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h
-jdpostct.o: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdsample.o: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdtrans.o: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jerror.o: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h
-jfdctflt.o: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jfdctfst.o: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jfdctint.o: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctflt.o: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctfst.o: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctint.o: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctred.o: jidctred.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jquant1.o: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jquant2.o: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jutils.o: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jmemmgr.o: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemansi.o: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemname.o: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemnobs.o: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemdos.o: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemmac.o: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-cjpeg.o: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-djpeg.o: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-jpegtran.o: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h
-rdjpgcom.o: rdjpgcom.c jinclude.h jconfig.h
-wrjpgcom.o: wrjpgcom.c jinclude.h jconfig.h
-cdjpeg.o: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdcolmap.o: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdswitch.o: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-transupp.o: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h
-rdppm.o: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrppm.o: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdgif.o: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrgif.o: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdtarga.o: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrtarga.o: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdbmp.o: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrbmp.o: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdrle.o: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrrle.o: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h

Engine/lib/ljpeg/extras/makefile.manx

@@ -1,214 +0,0 @@
-# Makefile for Independent JPEG Group's software
-
-# This makefile is for Amiga systems using Manx Aztec C ver 5.x.
-# Thanks to D.J. James ([email protected]) for this version.
-
-# Read installation instructions before saying "make" !!
-
-# The name of your C compiler:
-CC= cc
-
-# You may need to adjust these cc options:
-# Uncomment for generic 68000 code (will work on any Amiga)
-ARCHFLAGS= -sn
-
-# Uncomment for 68020/68030 code (faster, but won't run on 68000 CPU)
-#ARCHFLAGS= -c2
-
-CFLAGS= -MC -MD $(ARCHFLAGS) -spfam -r4
-
-# Link-time cc options:
-LDFLAGS= -g
-
-# To link any special libraries, add the necessary -l commands here.
-LDLIBS= -lml -lcl
-
-# Put here the object file name for the correct system-dependent memory
-# manager file.  For Amiga we recommend jmemname.o.
-SYSDEPMEM= jmemname.o
-
-# miscellaneous OS-dependent stuff
-# linker
-LN= ln
-# file deletion command
-RM= delete quiet
-# library (.lib) file creation command
-AR= lb
-
-# End of configurable options.
-
-
-# source files: JPEG library proper
-LIBSOURCES= jcapimin.c jcapistd.c jccoefct.c jccolor.c jcdctmgr.c jchuff.c \
-        jcinit.c jcmainct.c jcmarker.c jcmaster.c jcomapi.c jcparam.c \
-        jcphuff.c jcprepct.c jcsample.c jctrans.c jdapimin.c jdapistd.c \
-        jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c jddctmgr.c jdhuff.c \
-        jdinput.c jdmainct.c jdmarker.c jdmaster.c jdmerge.c jdphuff.c \
-        jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c jfdctfst.c \
-        jfdctint.c jidctflt.c jidctfst.c jidctint.c jidctred.c jquant1.c \
-        jquant2.c jutils.c jmemmgr.c
-# memmgr back ends: compile only one of these into a working library
-SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c
-# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom
-APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \
-        rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \
-        rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c
-SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES)
-# files included by source files
-INCLUDES= jchuff.h jdhuff.h jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h \
-        jpegint.h jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h
-# documentation, test, and support files
-DOCS= README install.doc usage.doc cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \
-        wrjpgcom.1 wizard.doc example.c libjpeg.doc structure.doc \
-        coderules.doc filelist.doc change.log
-MKFILES= configure makefile.cfg makefile.ansi makefile.unix makefile.bcc \
-        makefile.mc6 makefile.dj makefile.wat makefile.vc makelib.ds \
-        makeapps.ds makeproj.mac makcjpeg.st makdjpeg.st makljpeg.st \
-        maktjpeg.st makefile.manx makefile.sas makefile.mms makefile.vms \
-        makvms.opt
-CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \
-        jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \
-        jconfig.vms
-CONFIGUREFILES= config.guess config.sub install-sh ltconfig ltmain.sh
-OTHERFILES= jconfig.doc ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm
-TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \
-        testimgp.jpg
-DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \
-        $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES)
-# library object files common to compression and decompression
-COMOBJECTS= jcomapi.o jutils.o jerror.o jmemmgr.o $(SYSDEPMEM)
-# compression library object files
-CLIBOBJECTS= jcapimin.o jcapistd.o jctrans.o jcparam.o jdatadst.o jcinit.o \
-        jcmaster.o jcmarker.o jcmainct.o jcprepct.o jccoefct.o jccolor.o \
-        jcsample.o jchuff.o jcphuff.o jcdctmgr.o jfdctfst.o jfdctflt.o \
-        jfdctint.o
-# decompression library object files
-DLIBOBJECTS= jdapimin.o jdapistd.o jdtrans.o jdatasrc.o jdmaster.o \
-        jdinput.o jdmarker.o jdhuff.o jdphuff.o jdmainct.o jdcoefct.o \
-        jdpostct.o jddctmgr.o jidctfst.o jidctflt.o jidctint.o jidctred.o \
-        jdsample.o jdcolor.o jquant1.o jquant2.o jdmerge.o
-# These objectfiles are included in libjpeg.lib
-LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS)
-# object files for sample applications (excluding library files)
-COBJECTS= cjpeg.o rdppm.o rdgif.o rdtarga.o rdrle.o rdbmp.o rdswitch.o \
-        cdjpeg.o
-DOBJECTS= djpeg.o wrppm.o wrgif.o wrtarga.o wrrle.o wrbmp.o rdcolmap.o \
-        cdjpeg.o
-TROBJECTS= jpegtran.o rdswitch.o cdjpeg.o transupp.o
-
-
-all: libjpeg.lib cjpeg djpeg jpegtran rdjpgcom wrjpgcom
-
-libjpeg.lib: $(LIBOBJECTS)
-	-$(RM) libjpeg.lib
-	$(AR) libjpeg.lib  $(LIBOBJECTS)
-
-cjpeg: $(COBJECTS) libjpeg.lib
-	$(LN) $(LDFLAGS) -o cjpeg $(COBJECTS) libjpeg.lib $(LDLIBS)
-
-djpeg: $(DOBJECTS) libjpeg.lib
-	$(LN) $(LDFLAGS) -o djpeg $(DOBJECTS) libjpeg.lib $(LDLIBS)
-
-jpegtran: $(TROBJECTS) libjpeg.lib
-	$(LN) $(LDFLAGS) -o jpegtran $(TROBJECTS) libjpeg.lib $(LDLIBS)
-
-rdjpgcom: rdjpgcom.o
-	$(LN) $(LDFLAGS) -o rdjpgcom rdjpgcom.o $(LDLIBS)
-
-wrjpgcom: wrjpgcom.o
-	$(LN) $(LDFLAGS) -o wrjpgcom wrjpgcom.o $(LDLIBS)
-
-jconfig.h: jconfig.doc
-	echo You must prepare a system-dependent jconfig.h file.
-	echo Please read the installation directions in install.doc.
-	exit 1
-
-clean:
-	-$(RM) *.o cjpeg djpeg jpegtran libjpeg.lib rdjpgcom wrjpgcom
-	-$(RM) core testout*.*
-
-test: cjpeg djpeg jpegtran
-	-$(RM) testout*.*
-	djpeg -dct int -ppm -outfile testout.ppm  testorig.jpg
-	djpeg -dct int -bmp -colors 256 -outfile testout.bmp  testorig.jpg
-	cjpeg -dct int -outfile testout.jpg  testimg.ppm
-	djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg
-	cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm
-	jpegtran -outfile testoutt.jpg testprog.jpg
-	cmp testimg.ppm testout.ppm
-	cmp testimg.bmp testout.bmp
-	cmp testimg.jpg testout.jpg
-	cmp testimg.ppm testoutp.ppm
-	cmp testimgp.jpg testoutp.jpg
-	cmp testorig.jpg testoutt.jpg
-
-
-jcapimin.o: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcapistd.o: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jccoefct.o: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jccolor.o: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcdctmgr.o: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jchuff.o: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h
-jcinit.o: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmainct.o: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmarker.o: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmaster.o: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcomapi.o: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcparam.o: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcphuff.o: jcphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h
-jcprepct.o: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcsample.o: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jctrans.o: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdapimin.o: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdapistd.o: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdatadst.o: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
-jdatasrc.o: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
-jdcoefct.o: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdcolor.o: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jddctmgr.o: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jdhuff.o: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h
-jdinput.o: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmainct.o: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmarker.o: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmaster.o: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmerge.o: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdphuff.o: jdphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h
-jdpostct.o: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdsample.o: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdtrans.o: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jerror.o: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h
-jfdctflt.o: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jfdctfst.o: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jfdctint.o: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctflt.o: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctfst.o: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctint.o: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctred.o: jidctred.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jquant1.o: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jquant2.o: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jutils.o: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jmemmgr.o: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemansi.o: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemname.o: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemnobs.o: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemdos.o: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemmac.o: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-cjpeg.o: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-djpeg.o: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-jpegtran.o: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h
-rdjpgcom.o: rdjpgcom.c jinclude.h jconfig.h
-wrjpgcom.o: wrjpgcom.c jinclude.h jconfig.h
-cdjpeg.o: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdcolmap.o: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdswitch.o: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-transupp.o: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h
-rdppm.o: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrppm.o: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdgif.o: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrgif.o: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdtarga.o: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrtarga.o: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdbmp.o: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrbmp.o: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdrle.o: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrrle.o: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h

Engine/lib/ljpeg/extras/makefile.mc6

@@ -1,249 +0,0 @@
-# Makefile for Independent JPEG Group's software
-
-# This makefile is for Microsoft C for MS-DOS, version 6.00A and up.
-# Use NMAKE, not Microsoft's brain-damaged MAKE.
-# Thanks to Alan Wright and Chris Turner of Olivetti Research Ltd.
-
-# Read installation instructions before saying "nmake" !!
-
-# You may need to adjust these compiler options:
-CFLAGS = -AM -Oecigt -Gs -W3
-# -AM medium memory model (or use -AS for small model, if you remove features)
-# -Oecigt -Gs  maximum safe optimisation (-Ol has bugs in MSC 6.00A)
-# -W3 warning level 3
-# You might also want to add -G2 if you have an 80286, etc.
-# Generally, we recommend defining any configuration symbols in jconfig.h,
-# NOT via -D switches here.
-
-# Jan-Herman Buining suggests the following switches for MS C 8.0 and a 486:
-# CFLAGS = /AM /f- /FPi87 /G3 /Gs /Gy /Ob1 /Oc /Oe /Og /Oi /Ol /On /Oo /Ot \
-#          /OV4 /W3
-# except for jquant1.c, which must be compiled with /Oo- to avoid a compiler
-# crash.
-
-# Ingar Steinsland suggests the following switches when building
-# a 16-bit Windows DLL:
-# CFLAGS = -ALw -Gsw -Zpe -W3 -O2 -Zi -Zd
-
-# Put here the object file name for the correct system-dependent memory
-# manager file.  For DOS, we recommend jmemdos.c and jmemdosa.asm.
-# (But not for Windows; see install.doc if you use this makefile for Windows.)
-SYSDEPMEM= jmemdos.obj jmemdosa.obj
-# SYSDEPMEMLIB must list the same files with "+" signs for the librarian.
-SYSDEPMEMLIB= +jmemdos.obj +jmemdosa.obj
-
-# End of configurable options.
-
-
-# source files: JPEG library proper
-LIBSOURCES= jcapimin.c jcapistd.c jccoefct.c jccolor.c jcdctmgr.c jchuff.c \
-        jcinit.c jcmainct.c jcmarker.c jcmaster.c jcomapi.c jcparam.c \
-        jcphuff.c jcprepct.c jcsample.c jctrans.c jdapimin.c jdapistd.c \
-        jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c jddctmgr.c jdhuff.c \
-        jdinput.c jdmainct.c jdmarker.c jdmaster.c jdmerge.c jdphuff.c \
-        jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c jfdctfst.c \
-        jfdctint.c jidctflt.c jidctfst.c jidctint.c jidctred.c jquant1.c \
-        jquant2.c jutils.c jmemmgr.c
-# memmgr back ends: compile only one of these into a working library
-SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c
-# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom
-APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \
-        rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \
-        rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c
-SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES)
-# files included by source files
-INCLUDES= jchuff.h jdhuff.h jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h \
-        jpegint.h jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h
-# documentation, test, and support files
-DOCS= README install.doc usage.doc cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \
-        wrjpgcom.1 wizard.doc example.c libjpeg.doc structure.doc \
-        coderules.doc filelist.doc change.log
-MKFILES= configure makefile.cfg makefile.ansi makefile.unix makefile.bcc \
-        makefile.mc6 makefile.dj makefile.wat makefile.vc makelib.ds \
-        makeapps.ds makeproj.mac makcjpeg.st makdjpeg.st makljpeg.st \
-        maktjpeg.st makefile.manx makefile.sas makefile.mms makefile.vms \
-        makvms.opt
-CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \
-        jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \
-        jconfig.vms
-CONFIGUREFILES= config.guess config.sub install-sh ltconfig ltmain.sh
-OTHERFILES= jconfig.doc ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm
-TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \
-        testimgp.jpg
-DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \
-        $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES)
-# library object files common to compression and decompression
-COMOBJECTS= jcomapi.obj jutils.obj jerror.obj jmemmgr.obj $(SYSDEPMEM)
-# compression library object files
-CLIBOBJECTS= jcapimin.obj jcapistd.obj jctrans.obj jcparam.obj jdatadst.obj \
-        jcinit.obj jcmaster.obj jcmarker.obj jcmainct.obj jcprepct.obj \
-        jccoefct.obj jccolor.obj jcsample.obj jchuff.obj jcphuff.obj \
-        jcdctmgr.obj jfdctfst.obj jfdctflt.obj jfdctint.obj
-# decompression library object files
-DLIBOBJECTS= jdapimin.obj jdapistd.obj jdtrans.obj jdatasrc.obj \
-        jdmaster.obj jdinput.obj jdmarker.obj jdhuff.obj jdphuff.obj \
-        jdmainct.obj jdcoefct.obj jdpostct.obj jddctmgr.obj jidctfst.obj \
-        jidctflt.obj jidctint.obj jidctred.obj jdsample.obj jdcolor.obj \
-        jquant1.obj jquant2.obj jdmerge.obj
-# These objectfiles are included in libjpeg.lib
-LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS)
-# object files for sample applications (excluding library files)
-COBJECTS= cjpeg.obj rdppm.obj rdgif.obj rdtarga.obj rdrle.obj rdbmp.obj \
-        rdswitch.obj cdjpeg.obj
-DOBJECTS= djpeg.obj wrppm.obj wrgif.obj wrtarga.obj wrrle.obj wrbmp.obj \
-        rdcolmap.obj cdjpeg.obj
-TROBJECTS= jpegtran.obj rdswitch.obj cdjpeg.obj transupp.obj
-
-# need linker response file because file list > 128 chars
-RFILE = libjpeg.ans
-
-
-all: libjpeg.lib cjpeg.exe djpeg.exe jpegtran.exe rdjpgcom.exe wrjpgcom.exe
-
-libjpeg.lib: $(LIBOBJECTS) $(RFILE)
-	del libjpeg.lib
-	lib @$(RFILE)
-
-# linker response file for building libjpeg.lib
-$(RFILE) : makefile
-	del $(RFILE)
-	echo libjpeg.lib >$(RFILE)
-# silly want-to-create-it prompt:
-	echo y >>$(RFILE)
-	echo +jcapimin.obj +jcapistd.obj +jctrans.obj +jcparam.obj & >>$(RFILE)
-	echo +jdatadst.obj +jcinit.obj +jcmaster.obj +jcmarker.obj & >>$(RFILE)
-	echo +jcmainct.obj +jcprepct.obj +jccoefct.obj & >>$(RFILE)
-	echo +jccolor.obj +jcsample.obj +jchuff.obj +jcphuff.obj & >>$(RFILE)
-	echo +jcdctmgr.obj +jfdctfst.obj +jfdctflt.obj & >>$(RFILE)
-	echo +jfdctint.obj +jdapimin.obj +jdapistd.obj & >>$(RFILE)
-	echo +jdtrans.obj +jdatasrc.obj +jdmaster.obj +jdinput.obj & >>$(RFILE)
-	echo +jdmarker.obj +jdhuff.obj +jdphuff.obj +jdmainct.obj & >>$(RFILE)
-	echo +jdcoefct.obj +jdpostct.obj +jddctmgr.obj & >>$(RFILE)
-	echo +jidctfst.obj +jidctflt.obj +jidctint.obj & >>$(RFILE)
-	echo +jidctred.obj +jdsample.obj +jdcolor.obj +jquant1.obj & >>$(RFILE)
-	echo +jquant2.obj +jdmerge.obj +jcomapi.obj +jutils.obj & >>$(RFILE)
-	echo +jerror.obj +jmemmgr.obj & >>$(RFILE)
-	echo $(SYSDEPMEMLIB) ; >>$(RFILE)
-
-cjpeg.exe: $(COBJECTS) libjpeg.lib
-	echo $(COBJECTS) >cjpeg.lst
-	link /STACK:4096 /EXEPACK @cjpeg.lst, cjpeg.exe, , libjpeg.lib, ;
-	del cjpeg.lst
-
-djpeg.exe: $(DOBJECTS) libjpeg.lib
-	echo $(DOBJECTS) >djpeg.lst
-	link /STACK:4096 /EXEPACK @djpeg.lst, djpeg.exe, , libjpeg.lib, ;
-	del djpeg.lst
-
-jpegtran.exe: $(TROBJECTS) libjpeg.lib
-	link /STACK:4096 /EXEPACK $(TROBJECTS), jpegtran.exe, , libjpeg.lib, ;
-
-rdjpgcom.exe: rdjpgcom.c
-	$(CC) -AS -O -W3 rdjpgcom.c
-
-# wrjpgcom needs large model so it can malloc a 64K chunk
-wrjpgcom.exe: wrjpgcom.c
-	$(CC) -AL -O -W3 wrjpgcom.c
-
-jconfig.h: jconfig.doc
-	echo You must prepare a system-dependent jconfig.h file.
-	echo Please read the installation directions in install.doc.
-	exit 1
-
-clean:
-	del *.obj
-	del libjpeg.lib
-	del cjpeg.exe
-	del djpeg.exe
-	del jpegtran.exe
-	del rdjpgcom.exe
-	del wrjpgcom.exe
-	del testout*.*
-
-test: cjpeg.exe djpeg.exe jpegtran.exe
-	del testout*.*
-	djpeg -dct int -ppm -outfile testout.ppm  testorig.jpg
-	djpeg -dct int -bmp -colors 256 -outfile testout.bmp  testorig.jpg
-	cjpeg -dct int -outfile testout.jpg  testimg.ppm
-	djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg
-	cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm
-	jpegtran -outfile testoutt.jpg testprog.jpg
-	fc /b testimg.ppm testout.ppm
-	fc /b testimg.bmp testout.bmp
-	fc /b testimg.jpg testout.jpg
-	fc /b testimg.ppm testoutp.ppm
-	fc /b testimgp.jpg testoutp.jpg
-	fc /b testorig.jpg testoutt.jpg
-
-
-jcapimin.obj: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcapistd.obj: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jccoefct.obj: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jccolor.obj: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcdctmgr.obj: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jchuff.obj: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h
-jcinit.obj: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmainct.obj: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmarker.obj: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmaster.obj: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcomapi.obj: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcparam.obj: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcphuff.obj: jcphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h
-jcprepct.obj: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcsample.obj: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jctrans.obj: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdapimin.obj: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdapistd.obj: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdatadst.obj: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
-jdatasrc.obj: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
-jdcoefct.obj: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdcolor.obj: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jddctmgr.obj: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jdhuff.obj: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h
-jdinput.obj: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmainct.obj: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmarker.obj: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmaster.obj: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmerge.obj: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdphuff.obj: jdphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h
-jdpostct.obj: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdsample.obj: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdtrans.obj: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jerror.obj: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h
-jfdctflt.obj: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jfdctfst.obj: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jfdctint.obj: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctflt.obj: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctfst.obj: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctint.obj: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctred.obj: jidctred.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jquant1.obj: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jquant2.obj: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jutils.obj: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jmemmgr.obj: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemansi.obj: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemname.obj: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemnobs.obj: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemdos.obj: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemmac.obj: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-cjpeg.obj: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-djpeg.obj: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-jpegtran.obj: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h
-rdjpgcom.obj: rdjpgcom.c jinclude.h jconfig.h
-wrjpgcom.obj: wrjpgcom.c jinclude.h jconfig.h
-cdjpeg.obj: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdcolmap.obj: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdswitch.obj: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-transupp.obj: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h
-rdppm.obj: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrppm.obj: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdgif.obj: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrgif.obj: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdtarga.obj: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrtarga.obj: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdbmp.obj: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrbmp.obj: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdrle.obj: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrrle.obj: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-jmemdosa.obj : jmemdosa.asm
-	masm /mx $*;

Engine/lib/ljpeg/extras/makefile.mms

@@ -1,218 +0,0 @@
-# Makefile for Independent JPEG Group's software
-
-# This makefile is for use with MMS on Digital VMS systems.
-# Thanks to Rick Dyson ([email protected])
-# and Tim Bell ([email protected]) for their help.
-
-# Read installation instructions before saying "MMS" !!
-
-# You may need to adjust these cc options:
-CFLAGS= $(CFLAGS) /NoDebug /Optimize
-# Generally, we recommend defining any configuration symbols in jconfig.h,
-# NOT via /Define switches here.
-.ifdef ALPHA
-OPT=
-.else
-OPT= ,Sys$Disk:[]MAKVMS.OPT/Option
-.endif
-
-# Put here the object file name for the correct system-dependent memory
-# manager file.  For Unix this is usually jmemnobs.o, but you may want
-# to use jmemansi.o or jmemname.o if you have limited swap space.
-SYSDEPMEM= jmemnobs.obj
-
-# End of configurable options.
-
-
-# source files: JPEG library proper
-LIBSOURCES= jcapimin.c jcapistd.c jccoefct.c jccolor.c jcdctmgr.c jchuff.c \
-        jcinit.c jcmainct.c jcmarker.c jcmaster.c jcomapi.c jcparam.c \
-        jcphuff.c jcprepct.c jcsample.c jctrans.c jdapimin.c jdapistd.c \
-        jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c jddctmgr.c jdhuff.c \
-        jdinput.c jdmainct.c jdmarker.c jdmaster.c jdmerge.c jdphuff.c \
-        jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c jfdctfst.c \
-        jfdctint.c jidctflt.c jidctfst.c jidctint.c jidctred.c jquant1.c \
-        jquant2.c jutils.c jmemmgr.c
-# memmgr back ends: compile only one of these into a working library
-SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c
-# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom
-APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \
-        rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \
-        rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c
-SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES)
-# files included by source files
-INCLUDES= jchuff.h jdhuff.h jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h \
-        jpegint.h jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h
-# documentation, test, and support files
-DOCS= README install.doc usage.doc cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \
-        wrjpgcom.1 wizard.doc example.c libjpeg.doc structure.doc \
-        coderules.doc filelist.doc change.log
-MKFILES= configure makefile.cfg makefile.ansi makefile.unix makefile.bcc \
-        makefile.mc6 makefile.dj makefile.wat makefile.vc makelib.ds \
-        makeapps.ds makeproj.mac makcjpeg.st makdjpeg.st makljpeg.st \
-        maktjpeg.st makefile.manx makefile.sas makefile.mms makefile.vms \
-        makvms.opt
-CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \
-        jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \
-        jconfig.vms
-CONFIGUREFILES= config.guess config.sub install-sh ltconfig ltmain.sh
-OTHERFILES= jconfig.doc ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm
-TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \
-        testimgp.jpg
-DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \
-        $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES)
-# library object files common to compression and decompression
-COMOBJECTS= jcomapi.obj jutils.obj jerror.obj jmemmgr.obj $(SYSDEPMEM)
-# compression library object files
-CLIBOBJECTS= jcapimin.obj jcapistd.obj jctrans.obj jcparam.obj jdatadst.obj \
-        jcinit.obj jcmaster.obj jcmarker.obj jcmainct.obj jcprepct.obj \
-        jccoefct.obj jccolor.obj jcsample.obj jchuff.obj jcphuff.obj \
-        jcdctmgr.obj jfdctfst.obj jfdctflt.obj jfdctint.obj
-# decompression library object files
-DLIBOBJECTS= jdapimin.obj jdapistd.obj jdtrans.obj jdatasrc.obj \
-        jdmaster.obj jdinput.obj jdmarker.obj jdhuff.obj jdphuff.obj \
-        jdmainct.obj jdcoefct.obj jdpostct.obj jddctmgr.obj jidctfst.obj \
-        jidctflt.obj jidctint.obj jidctred.obj jdsample.obj jdcolor.obj \
-        jquant1.obj jquant2.obj jdmerge.obj
-# These objectfiles are included in libjpeg.olb
-LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS)
-# object files for sample applications (excluding library files)
-COBJECTS= cjpeg.obj rdppm.obj rdgif.obj rdtarga.obj rdrle.obj rdbmp.obj \
-        rdswitch.obj cdjpeg.obj
-DOBJECTS= djpeg.obj wrppm.obj wrgif.obj wrtarga.obj wrrle.obj wrbmp.obj \
-        rdcolmap.obj cdjpeg.obj
-TROBJECTS= jpegtran.obj rdswitch.obj cdjpeg.obj transupp.obj
-# objectfile lists with commas --- what a crock
-COBJLIST= cjpeg.obj,rdppm.obj,rdgif.obj,rdtarga.obj,rdrle.obj,rdbmp.obj,\
-          rdswitch.obj,cdjpeg.obj
-DOBJLIST= djpeg.obj,wrppm.obj,wrgif.obj,wrtarga.obj,wrrle.obj,wrbmp.obj,\
-          rdcolmap.obj,cdjpeg.obj
-TROBJLIST= jpegtran.obj,rdswitch.obj,cdjpeg.obj,transupp.obj
-LIBOBJLIST= jcapimin.obj,jcapistd.obj,jctrans.obj,jcparam.obj,jdatadst.obj,\
-          jcinit.obj,jcmaster.obj,jcmarker.obj,jcmainct.obj,jcprepct.obj,\
-          jccoefct.obj,jccolor.obj,jcsample.obj,jchuff.obj,jcphuff.obj,\
-          jcdctmgr.obj,jfdctfst.obj,jfdctflt.obj,jfdctint.obj,jdapimin.obj,\
-          jdapistd.obj,jdtrans.obj,jdatasrc.obj,jdmaster.obj,jdinput.obj,\
-          jdmarker.obj,jdhuff.obj,jdphuff.obj,jdmainct.obj,jdcoefct.obj,\
-          jdpostct.obj,jddctmgr.obj,jidctfst.obj,jidctflt.obj,jidctint.obj,\
-          jidctred.obj,jdsample.obj,jdcolor.obj,jquant1.obj,jquant2.obj,\
-          jdmerge.obj,jcomapi.obj,jutils.obj,jerror.obj,jmemmgr.obj,$(SYSDEPMEM)
-
-
-.first
-	@- Define /NoLog Sys Sys$Library
-
-ALL : libjpeg.olb cjpeg.exe djpeg.exe jpegtran.exe rdjpgcom.exe wrjpgcom.exe
-	@ Continue
-
-libjpeg.olb : $(LIBOBJECTS)
-	Library /Create libjpeg.olb $(LIBOBJLIST)
-
-cjpeg.exe : $(COBJECTS) libjpeg.olb
-	$(LINK) $(LFLAGS) /Executable = cjpeg.exe $(COBJLIST),libjpeg.olb/Library$(OPT)
-
-djpeg.exe : $(DOBJECTS) libjpeg.olb
-	$(LINK) $(LFLAGS) /Executable = djpeg.exe $(DOBJLIST),libjpeg.olb/Library$(OPT)
-
-jpegtran.exe : $(TROBJECTS) libjpeg.olb
-	$(LINK) $(LFLAGS) /Executable = jpegtran.exe $(TROBJLIST),libjpeg.olb/Library$(OPT)
-
-rdjpgcom.exe : rdjpgcom.obj
-	$(LINK) $(LFLAGS) /Executable = rdjpgcom.exe rdjpgcom.obj$(OPT)
-
-wrjpgcom.exe : wrjpgcom.obj
-	$(LINK) $(LFLAGS) /Executable = wrjpgcom.exe wrjpgcom.obj$(OPT)
-
-jconfig.h : jconfig.vms
-	@- Copy jconfig.vms jconfig.h
-
-clean :
-	@- Set Protection = Owner:RWED *.*;-1
-	@- Set Protection = Owner:RWED *.OBJ
-	- Purge /NoLog /NoConfirm *.*
-	- Delete /NoLog /NoConfirm *.OBJ;
-
-test : cjpeg.exe djpeg.exe jpegtran.exe
-	mcr sys$disk:[]djpeg -dct int -ppm -outfile testout.ppm testorig.jpg
-	mcr sys$disk:[]djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg
-	mcr sys$disk:[]cjpeg -dct int      -outfile testout.jpg testimg.ppm
-	mcr sys$disk:[]djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg
-	mcr sys$disk:[]cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm
-	mcr sys$disk:[]jpegtran -outfile testoutt.jpg testprog.jpg
-	- Backup /Compare/Log	  testimg.ppm testout.ppm
-	- Backup /Compare/Log	  testimg.bmp testout.bmp
-	- Backup /Compare/Log	  testimg.jpg testout.jpg
-	- Backup /Compare/Log	  testimg.ppm testoutp.ppm
-	- Backup /Compare/Log	  testimgp.jpg testoutp.jpg
-	- Backup /Compare/Log	  testorig.jpg testoutt.jpg
-
-
-jcapimin.obj : jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcapistd.obj : jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jccoefct.obj : jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jccolor.obj : jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcdctmgr.obj : jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jchuff.obj : jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h
-jcinit.obj : jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmainct.obj : jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmarker.obj : jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmaster.obj : jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcomapi.obj : jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcparam.obj : jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcphuff.obj : jcphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h
-jcprepct.obj : jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcsample.obj : jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jctrans.obj : jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdapimin.obj : jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdapistd.obj : jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdatadst.obj : jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
-jdatasrc.obj : jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
-jdcoefct.obj : jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdcolor.obj : jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jddctmgr.obj : jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jdhuff.obj : jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h
-jdinput.obj : jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmainct.obj : jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmarker.obj : jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmaster.obj : jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmerge.obj : jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdphuff.obj : jdphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h
-jdpostct.obj : jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdsample.obj : jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdtrans.obj : jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jerror.obj : jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h
-jfdctflt.obj : jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jfdctfst.obj : jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jfdctint.obj : jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctflt.obj : jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctfst.obj : jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctint.obj : jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctred.obj : jidctred.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jquant1.obj : jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jquant2.obj : jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jutils.obj : jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jmemmgr.obj : jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemansi.obj : jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemname.obj : jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemnobs.obj : jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemdos.obj : jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemmac.obj : jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-cjpeg.obj : cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-djpeg.obj : djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-jpegtran.obj : jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h
-rdjpgcom.obj : rdjpgcom.c jinclude.h jconfig.h
-wrjpgcom.obj : wrjpgcom.c jinclude.h jconfig.h
-cdjpeg.obj : cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdcolmap.obj : rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdswitch.obj : rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-transupp.obj : transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h
-rdppm.obj : rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrppm.obj : wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdgif.obj : rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrgif.obj : wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdtarga.obj : rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrtarga.obj : wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdbmp.obj : rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrbmp.obj : wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdrle.obj : rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrrle.obj : wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h

Engine/lib/ljpeg/extras/makefile.sas

@@ -1,252 +0,0 @@
-# Makefile for Independent JPEG Group's software
-
-# This makefile is for Amiga systems using SAS C 6.0 and up.
-# Thanks to Ed Hanway, Mark Rinfret, and Jim Zepeda.
-
-# Read installation instructions before saying "make" !!
-
-# The name of your C compiler:
-CC= sc
-
-# You may need to adjust these cc options:
-# Uncomment the following lines for generic 680x0 version
-ARCHFLAGS= cpu=any
-SUFFIX=
-
-# Uncomment the following lines for 68030-only version
-#ARCHFLAGS= cpu=68030
-#SUFFIX=.030
-
-CFLAGS= nostackcheck data=near parms=register optimize $(ARCHFLAGS) \
-	ignore=104 ignore=304 ignore=306
-# ignore=104 disables warnings for mismatched const qualifiers
-# ignore=304 disables warnings for variables being optimized out
-# ignore=306 disables warnings for the inlining of functions
-# Generally, we recommend defining any configuration symbols in jconfig.h,
-# NOT via define switches here.
-
-# Link-time cc options:
-LDFLAGS= SC SD ND BATCH
-
-# To link any special libraries, add the necessary commands here.
-LDLIBS= LIB:scm.lib LIB:sc.lib
-
-# Put here the object file name for the correct system-dependent memory
-# manager file.  For Amiga we recommend jmemname.o.
-SYSDEPMEM= jmemname.o
-
-# miscellaneous OS-dependent stuff
-# linker
-LN= slink
-# file deletion command
-RM= delete quiet
-# library (.lib) file creation command
-AR= oml
-
-# End of configurable options.
-
-
-# source files: JPEG library proper
-LIBSOURCES= jcapimin.c jcapistd.c jccoefct.c jccolor.c jcdctmgr.c jchuff.c \
-        jcinit.c jcmainct.c jcmarker.c jcmaster.c jcomapi.c jcparam.c \
-        jcphuff.c jcprepct.c jcsample.c jctrans.c jdapimin.c jdapistd.c \
-        jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c jddctmgr.c jdhuff.c \
-        jdinput.c jdmainct.c jdmarker.c jdmaster.c jdmerge.c jdphuff.c \
-        jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c jfdctfst.c \
-        jfdctint.c jidctflt.c jidctfst.c jidctint.c jidctred.c jquant1.c \
-        jquant2.c jutils.c jmemmgr.c
-# memmgr back ends: compile only one of these into a working library
-SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c
-# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom
-APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \
-        rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \
-        rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c
-SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES)
-# files included by source files
-INCLUDES= jchuff.h jdhuff.h jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h \
-        jpegint.h jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h
-# documentation, test, and support files
-DOCS= README install.doc usage.doc cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \
-        wrjpgcom.1 wizard.doc example.c libjpeg.doc structure.doc \
-        coderules.doc filelist.doc change.log
-MKFILES= configure makefile.cfg makefile.ansi makefile.unix makefile.bcc \
-        makefile.mc6 makefile.dj makefile.wat makefile.vc makelib.ds \
-        makeapps.ds makeproj.mac makcjpeg.st makdjpeg.st makljpeg.st \
-        maktjpeg.st makefile.manx makefile.sas makefile.mms makefile.vms \
-        makvms.opt
-CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \
-        jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \
-        jconfig.vms
-CONFIGUREFILES= config.guess config.sub install-sh ltconfig ltmain.sh
-OTHERFILES= jconfig.doc ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm
-TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \
-        testimgp.jpg
-DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \
-        $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES)
-# library object files common to compression and decompression
-COMOBJECTS= jcomapi.o jutils.o jerror.o jmemmgr.o $(SYSDEPMEM)
-# compression library object files
-CLIBOBJECTS= jcapimin.o jcapistd.o jctrans.o jcparam.o jdatadst.o jcinit.o \
-        jcmaster.o jcmarker.o jcmainct.o jcprepct.o jccoefct.o jccolor.o \
-        jcsample.o jchuff.o jcphuff.o jcdctmgr.o jfdctfst.o jfdctflt.o \
-        jfdctint.o
-# decompression library object files
-DLIBOBJECTS= jdapimin.o jdapistd.o jdtrans.o jdatasrc.o jdmaster.o \
-        jdinput.o jdmarker.o jdhuff.o jdphuff.o jdmainct.o jdcoefct.o \
-        jdpostct.o jddctmgr.o jidctfst.o jidctflt.o jidctint.o jidctred.o \
-        jdsample.o jdcolor.o jquant1.o jquant2.o jdmerge.o
-# These objectfiles are included in libjpeg.lib
-LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS)
-# object files for sample applications (excluding library files)
-COBJECTS= cjpeg.o rdppm.o rdgif.o rdtarga.o rdrle.o rdbmp.o rdswitch.o \
-        cdjpeg.o
-DOBJECTS= djpeg.o wrppm.o wrgif.o wrtarga.o wrrle.o wrbmp.o rdcolmap.o \
-        cdjpeg.o
-TROBJECTS= jpegtran.o rdswitch.o cdjpeg.o transupp.o
-
-
-all: libjpeg.lib cjpeg$(SUFFIX) djpeg$(SUFFIX) jpegtran$(SUFFIX) rdjpgcom$(SUFFIX) wrjpgcom$(SUFFIX)
-
-# note: do several AR steps to avoid command line length limitations
-
-libjpeg.lib: $(LIBOBJECTS)
-	-$(RM) libjpeg.lib
-	$(AR) libjpeg.lib r $(CLIBOBJECTS)
-	$(AR) libjpeg.lib r $(DLIBOBJECTS)
-	$(AR) libjpeg.lib r $(COMOBJECTS)
-
-cjpeg$(SUFFIX): $(COBJECTS) libjpeg.lib
-	$(LN) <WITH <
-$(LDFLAGS)
-TO cjpeg$(SUFFIX)
-FROM LIB:c.o $(COBJECTS)
-LIB libjpeg.lib $(LDLIBS)
-<
-
-djpeg$(SUFFIX): $(DOBJECTS) libjpeg.lib
-	$(LN) <WITH <
-$(LDFLAGS)
-TO djpeg$(SUFFIX)
-FROM LIB:c.o $(DOBJECTS)
-LIB libjpeg.lib $(LDLIBS)
-<
-
-jpegtran$(SUFFIX): $(TROBJECTS) libjpeg.lib
-	$(LN) <WITH <
-$(LDFLAGS)
-TO jpegtran$(SUFFIX)
-FROM LIB:c.o $(TROBJECTS)
-LIB libjpeg.lib $(LDLIBS)
-<
-
-rdjpgcom$(SUFFIX): rdjpgcom.o
-	$(LN) <WITH <
-$(LDFLAGS)
-TO rdjpgcom$(SUFFIX)
-FROM LIB:c.o rdjpgcom.o
-LIB $(LDLIBS)
-<
-
-wrjpgcom$(SUFFIX): wrjpgcom.o
-	$(LN) <WITH <
-$(LDFLAGS)
-TO wrjpgcom$(SUFFIX)
-FROM LIB:c.o wrjpgcom.o
-LIB $(LDLIBS)
-<
-
-jconfig.h: jconfig.doc
-	echo You must prepare a system-dependent jconfig.h file.
-	echo Please read the installation directions in install.doc.
-	exit 1
-
-clean:
-	-$(RM) *.o cjpeg djpeg jpegtran cjpeg.030 djpeg.030 jpegtran.030
-	-$(RM) rdjpgcom wrjpgcom rdjpgcom.030 wrjpgcom.030
-	-$(RM) libjpeg.lib core testout*.*
-
-test: cjpeg djpeg jpegtran
-	-$(RM) testout*.*
-	djpeg -dct int -ppm -outfile testout.ppm  testorig.jpg
-	djpeg -dct int -bmp -colors 256 -outfile testout.bmp  testorig.jpg
-	cjpeg -dct int -outfile testout.jpg  testimg.ppm
-	djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg
-	cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm
-	jpegtran -outfile testoutt.jpg testprog.jpg
-	cmp testimg.ppm testout.ppm
-	cmp testimg.bmp testout.bmp
-	cmp testimg.jpg testout.jpg
-	cmp testimg.ppm testoutp.ppm
-	cmp testimgp.jpg testoutp.jpg
-	cmp testorig.jpg testoutt.jpg
-
-
-jcapimin.o: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcapistd.o: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jccoefct.o: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jccolor.o: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcdctmgr.o: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jchuff.o: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h
-jcinit.o: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmainct.o: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmarker.o: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmaster.o: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcomapi.o: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcparam.o: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcphuff.o: jcphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h
-jcprepct.o: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcsample.o: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jctrans.o: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdapimin.o: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdapistd.o: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdatadst.o: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
-jdatasrc.o: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
-jdcoefct.o: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdcolor.o: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jddctmgr.o: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jdhuff.o: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h
-jdinput.o: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmainct.o: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmarker.o: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmaster.o: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmerge.o: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdphuff.o: jdphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h
-jdpostct.o: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdsample.o: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdtrans.o: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jerror.o: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h
-jfdctflt.o: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jfdctfst.o: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jfdctint.o: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctflt.o: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctfst.o: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctint.o: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctred.o: jidctred.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jquant1.o: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jquant2.o: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jutils.o: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jmemmgr.o: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemansi.o: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemname.o: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemnobs.o: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemdos.o: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemmac.o: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-cjpeg.o: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-djpeg.o: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-jpegtran.o: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h
-rdjpgcom.o: rdjpgcom.c jinclude.h jconfig.h
-wrjpgcom.o: wrjpgcom.c jinclude.h jconfig.h
-cdjpeg.o: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdcolmap.o: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdswitch.o: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-transupp.o: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h
-rdppm.o: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrppm.o: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdgif.o: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrgif.o: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdtarga.o: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrtarga.o: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdbmp.o: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrbmp.o: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdrle.o: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrrle.o: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h

Engine/lib/ljpeg/extras/makefile.unix

@@ -1,228 +0,0 @@
-# Makefile for Independent JPEG Group's software
-
-# This makefile is suitable for Unix-like systems with non-ANSI compilers.
-# If you have an ANSI compiler, makefile.ansi is a better starting point.
-
-# Read installation instructions before saying "make" !!
-
-# The name of your C compiler:
-CC= cc
-
-# You may need to adjust these cc options:
-CFLAGS= -O
-# Generally, we recommend defining any configuration symbols in jconfig.h,
-# NOT via -D switches here.
-# However, any special defines for ansi2knr.c may be included here:
-ANSI2KNRFLAGS= 
-
-# Link-time cc options:
-LDFLAGS= 
-
-# To link any special libraries, add the necessary -l commands here.
-LDLIBS= 
-
-# Put here the object file name for the correct system-dependent memory
-# manager file.  For Unix this is usually jmemnobs.o, but you may want
-# to use jmemansi.o or jmemname.o if you have limited swap space.
-SYSDEPMEM= jmemnobs.o
-
-# miscellaneous OS-dependent stuff
-# linker
-LN= $(CC)
-# file deletion command
-RM= rm -f
-# file rename command
-MV= mv
-# library (.a) file creation command
-AR= ar rc
-# second step in .a creation (use "touch" if not needed)
-AR2= ranlib
-
-# End of configurable options.
-
-
-# source files: JPEG library proper
-LIBSOURCES= jcapimin.c jcapistd.c jccoefct.c jccolor.c jcdctmgr.c jchuff.c \
-        jcinit.c jcmainct.c jcmarker.c jcmaster.c jcomapi.c jcparam.c \
-        jcphuff.c jcprepct.c jcsample.c jctrans.c jdapimin.c jdapistd.c \
-        jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c jddctmgr.c jdhuff.c \
-        jdinput.c jdmainct.c jdmarker.c jdmaster.c jdmerge.c jdphuff.c \
-        jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c jfdctfst.c \
-        jfdctint.c jidctflt.c jidctfst.c jidctint.c jidctred.c jquant1.c \
-        jquant2.c jutils.c jmemmgr.c
-# memmgr back ends: compile only one of these into a working library
-SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c
-# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom
-APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \
-        rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \
-        rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c
-SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES)
-# files included by source files
-INCLUDES= jchuff.h jdhuff.h jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h \
-        jpegint.h jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h
-# documentation, test, and support files
-DOCS= README install.doc usage.doc cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \
-        wrjpgcom.1 wizard.doc example.c libjpeg.doc structure.doc \
-        coderules.doc filelist.doc change.log
-MKFILES= configure makefile.cfg makefile.ansi makefile.unix makefile.bcc \
-        makefile.mc6 makefile.dj makefile.wat makefile.vc makelib.ds \
-        makeapps.ds makeproj.mac makcjpeg.st makdjpeg.st makljpeg.st \
-        maktjpeg.st makefile.manx makefile.sas makefile.mms makefile.vms \
-        makvms.opt
-CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \
-        jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \
-        jconfig.vms
-CONFIGUREFILES= config.guess config.sub install-sh ltconfig ltmain.sh
-OTHERFILES= jconfig.doc ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm
-TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \
-        testimgp.jpg
-DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \
-        $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES)
-# library object files common to compression and decompression
-COMOBJECTS= jcomapi.o jutils.o jerror.o jmemmgr.o $(SYSDEPMEM)
-# compression library object files
-CLIBOBJECTS= jcapimin.o jcapistd.o jctrans.o jcparam.o jdatadst.o jcinit.o \
-        jcmaster.o jcmarker.o jcmainct.o jcprepct.o jccoefct.o jccolor.o \
-        jcsample.o jchuff.o jcphuff.o jcdctmgr.o jfdctfst.o jfdctflt.o \
-        jfdctint.o
-# decompression library object files
-DLIBOBJECTS= jdapimin.o jdapistd.o jdtrans.o jdatasrc.o jdmaster.o \
-        jdinput.o jdmarker.o jdhuff.o jdphuff.o jdmainct.o jdcoefct.o \
-        jdpostct.o jddctmgr.o jidctfst.o jidctflt.o jidctint.o jidctred.o \
-        jdsample.o jdcolor.o jquant1.o jquant2.o jdmerge.o
-# These objectfiles are included in libjpeg.a
-LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS)
-# object files for sample applications (excluding library files)
-COBJECTS= cjpeg.o rdppm.o rdgif.o rdtarga.o rdrle.o rdbmp.o rdswitch.o \
-        cdjpeg.o
-DOBJECTS= djpeg.o wrppm.o wrgif.o wrtarga.o wrrle.o wrbmp.o rdcolmap.o \
-        cdjpeg.o
-TROBJECTS= jpegtran.o rdswitch.o cdjpeg.o transupp.o
-
-
-all: ansi2knr libjpeg.a cjpeg djpeg jpegtran rdjpgcom wrjpgcom
-
-# This rule causes ansi2knr to be invoked.
-.c.o:
-	./ansi2knr $*.c T$*.c
-	$(CC) $(CFLAGS) -c T$*.c
-	$(RM) T$*.c $*.o
-	$(MV) T$*.o $*.o
-
-ansi2knr: ansi2knr.c
-	$(CC) $(CFLAGS) $(ANSI2KNRFLAGS) -o ansi2knr ansi2knr.c
-
-libjpeg.a: ansi2knr $(LIBOBJECTS)
-	$(RM) libjpeg.a
-	$(AR) libjpeg.a  $(LIBOBJECTS)
-	$(AR2) libjpeg.a
-
-cjpeg: ansi2knr $(COBJECTS) libjpeg.a
-	$(LN) $(LDFLAGS) -o cjpeg $(COBJECTS) libjpeg.a $(LDLIBS)
-
-djpeg: ansi2knr $(DOBJECTS) libjpeg.a
-	$(LN) $(LDFLAGS) -o djpeg $(DOBJECTS) libjpeg.a $(LDLIBS)
-
-jpegtran: ansi2knr $(TROBJECTS) libjpeg.a
-	$(LN) $(LDFLAGS) -o jpegtran $(TROBJECTS) libjpeg.a $(LDLIBS)
-
-rdjpgcom: rdjpgcom.o
-	$(LN) $(LDFLAGS) -o rdjpgcom rdjpgcom.o $(LDLIBS)
-
-wrjpgcom: wrjpgcom.o
-	$(LN) $(LDFLAGS) -o wrjpgcom wrjpgcom.o $(LDLIBS)
-
-jconfig.h: jconfig.doc
-	echo You must prepare a system-dependent jconfig.h file.
-	echo Please read the installation directions in install.doc.
-	exit 1
-
-clean:
-	$(RM) *.o cjpeg djpeg jpegtran libjpeg.a rdjpgcom wrjpgcom
-	$(RM) ansi2knr core testout*
-
-test: cjpeg djpeg jpegtran
-	$(RM) testout*
-	./djpeg -dct int -ppm -outfile testout.ppm  testorig.jpg
-	./djpeg -dct int -bmp -colors 256 -outfile testout.bmp  testorig.jpg
-	./cjpeg -dct int -outfile testout.jpg  testimg.ppm
-	./djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg
-	./cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm
-	./jpegtran -outfile testoutt.jpg testprog.jpg
-	cmp testimg.ppm testout.ppm
-	cmp testimg.bmp testout.bmp
-	cmp testimg.jpg testout.jpg
-	cmp testimg.ppm testoutp.ppm
-	cmp testimgp.jpg testoutp.jpg
-	cmp testorig.jpg testoutt.jpg
-
-
-jcapimin.o: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcapistd.o: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jccoefct.o: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jccolor.o: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcdctmgr.o: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jchuff.o: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h
-jcinit.o: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmainct.o: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmarker.o: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmaster.o: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcomapi.o: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcparam.o: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcphuff.o: jcphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h
-jcprepct.o: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcsample.o: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jctrans.o: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdapimin.o: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdapistd.o: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdatadst.o: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
-jdatasrc.o: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
-jdcoefct.o: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdcolor.o: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jddctmgr.o: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jdhuff.o: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h
-jdinput.o: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmainct.o: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmarker.o: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmaster.o: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmerge.o: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdphuff.o: jdphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h
-jdpostct.o: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdsample.o: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdtrans.o: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jerror.o: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h
-jfdctflt.o: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jfdctfst.o: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jfdctint.o: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctflt.o: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctfst.o: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctint.o: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctred.o: jidctred.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jquant1.o: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jquant2.o: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jutils.o: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jmemmgr.o: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemansi.o: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemname.o: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemnobs.o: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemdos.o: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemmac.o: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-cjpeg.o: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-djpeg.o: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-jpegtran.o: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h
-rdjpgcom.o: rdjpgcom.c jinclude.h jconfig.h
-wrjpgcom.o: wrjpgcom.c jinclude.h jconfig.h
-cdjpeg.o: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdcolmap.o: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdswitch.o: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-transupp.o: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h
-rdppm.o: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrppm.o: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdgif.o: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrgif.o: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdtarga.o: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrtarga.o: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdbmp.o: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrbmp.o: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdrle.o: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrrle.o: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h

Engine/lib/ljpeg/extras/makefile.vc

@@ -1,211 +0,0 @@
-# Makefile for Independent JPEG Group's software
-
-# This makefile is for Microsoft Visual C++ on Windows NT (and 95?).
-# It builds the IJG library as a statically linkable library (.LIB),
-# and builds the sample applications as console-mode apps.
-# Thanks to Xingong Chang, Raymond Everly and others.
-
-# Read installation instructions before saying "nmake" !!
-# To build an optimized library without debug info, say "nmake nodebug=1".
-
-# Pull in standard variable definitions
-!include <win32.mak>
-
-# You may want to adjust these compiler options:
-CFLAGS= $(cflags) $(cdebug) $(cvars) -I.
-# Generally, we recommend defining any configuration symbols in jconfig.h,
-# NOT via -D switches here.
-
-# Link-time options:
-LDFLAGS= $(ldebug) $(conlflags)
-
-# To link any special libraries, add the necessary commands here.
-LDLIBS= $(conlibs)
-
-# Put here the object file name for the correct system-dependent memory
-# manager file.  For NT we suggest jmemnobs.obj, which expects the OS to
-# provide adequate virtual memory.
-SYSDEPMEM= jmemnobs.obj
-
-# miscellaneous OS-dependent stuff
-# file deletion command
-RM= del
-
-# End of configurable options.
-
-
-# source files: JPEG library proper
-LIBSOURCES= jcapimin.c jcapistd.c jccoefct.c jccolor.c jcdctmgr.c jchuff.c \
-        jcinit.c jcmainct.c jcmarker.c jcmaster.c jcomapi.c jcparam.c \
-        jcphuff.c jcprepct.c jcsample.c jctrans.c jdapimin.c jdapistd.c \
-        jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c jddctmgr.c jdhuff.c \
-        jdinput.c jdmainct.c jdmarker.c jdmaster.c jdmerge.c jdphuff.c \
-        jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c jfdctfst.c \
-        jfdctint.c jidctflt.c jidctfst.c jidctint.c jidctred.c jquant1.c \
-        jquant2.c jutils.c jmemmgr.c
-# memmgr back ends: compile only one of these into a working library
-SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c
-# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom
-APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \
-        rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \
-        rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c
-SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES)
-# files included by source files
-INCLUDES= jchuff.h jdhuff.h jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h \
-        jpegint.h jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h
-# documentation, test, and support files
-DOCS= README install.doc usage.doc cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \
-        wrjpgcom.1 wizard.doc example.c libjpeg.doc structure.doc \
-        coderules.doc filelist.doc change.log
-MKFILES= configure makefile.cfg makefile.ansi makefile.unix makefile.bcc \
-        makefile.mc6 makefile.dj makefile.wat makefile.vc makelib.ds \
-        makeapps.ds makeproj.mac makcjpeg.st makdjpeg.st makljpeg.st \
-        maktjpeg.st makefile.manx makefile.sas makefile.mms makefile.vms \
-        makvms.opt
-CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \
-        jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \
-        jconfig.vms
-CONFIGUREFILES= config.guess config.sub install-sh ltconfig ltmain.sh
-OTHERFILES= jconfig.doc ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm
-TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \
-        testimgp.jpg
-DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \
-        $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES)
-# library object files common to compression and decompression
-COMOBJECTS= jcomapi.obj jutils.obj jerror.obj jmemmgr.obj $(SYSDEPMEM)
-# compression library object files
-CLIBOBJECTS= jcapimin.obj jcapistd.obj jctrans.obj jcparam.obj jdatadst.obj \
-        jcinit.obj jcmaster.obj jcmarker.obj jcmainct.obj jcprepct.obj \
-        jccoefct.obj jccolor.obj jcsample.obj jchuff.obj jcphuff.obj \
-        jcdctmgr.obj jfdctfst.obj jfdctflt.obj jfdctint.obj
-# decompression library object files
-DLIBOBJECTS= jdapimin.obj jdapistd.obj jdtrans.obj jdatasrc.obj \
-        jdmaster.obj jdinput.obj jdmarker.obj jdhuff.obj jdphuff.obj \
-        jdmainct.obj jdcoefct.obj jdpostct.obj jddctmgr.obj jidctfst.obj \
-        jidctflt.obj jidctint.obj jidctred.obj jdsample.obj jdcolor.obj \
-        jquant1.obj jquant2.obj jdmerge.obj
-# These objectfiles are included in libjpeg.lib
-LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS)
-# object files for sample applications (excluding library files)
-COBJECTS= cjpeg.obj rdppm.obj rdgif.obj rdtarga.obj rdrle.obj rdbmp.obj \
-        rdswitch.obj cdjpeg.obj
-DOBJECTS= djpeg.obj wrppm.obj wrgif.obj wrtarga.obj wrrle.obj wrbmp.obj \
-        rdcolmap.obj cdjpeg.obj
-TROBJECTS= jpegtran.obj rdswitch.obj cdjpeg.obj transupp.obj
-
-# Template command for compiling .c to .obj
-.c.obj:
-	$(cc) $(CFLAGS) $*.c
-
-
-all: libjpeg.lib cjpeg.exe djpeg.exe jpegtran.exe rdjpgcom.exe wrjpgcom.exe
-
-libjpeg.lib: $(LIBOBJECTS)
-	$(RM) libjpeg.lib
-	lib -out:libjpeg.lib  $(LIBOBJECTS)
-
-cjpeg.exe: $(COBJECTS) libjpeg.lib
-	$(link) $(LDFLAGS) -out:cjpeg.exe $(COBJECTS) libjpeg.lib $(LDLIBS)
-
-djpeg.exe: $(DOBJECTS) libjpeg.lib
-	$(link) $(LDFLAGS) -out:djpeg.exe $(DOBJECTS) libjpeg.lib $(LDLIBS)
-
-jpegtran.exe: $(TROBJECTS) libjpeg.lib
-	$(link) $(LDFLAGS) -out:jpegtran.exe $(TROBJECTS) libjpeg.lib $(LDLIBS)
-
-rdjpgcom.exe: rdjpgcom.obj
-	$(link) $(LDFLAGS) -out:rdjpgcom.exe rdjpgcom.obj $(LDLIBS)
-
-wrjpgcom.exe: wrjpgcom.obj
-	$(link) $(LDFLAGS) -out:wrjpgcom.exe wrjpgcom.obj $(LDLIBS)
-
-
-clean:
-	$(RM) *.obj *.exe libjpeg.lib
-	$(RM) testout*
-
-test: cjpeg.exe djpeg.exe jpegtran.exe
-	$(RM) testout*
-	.\djpeg -dct int -ppm -outfile testout.ppm  testorig.jpg
-	.\djpeg -dct int -bmp -colors 256 -outfile testout.bmp  testorig.jpg
-	.\cjpeg -dct int -outfile testout.jpg  testimg.ppm
-	.\djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg
-	.\cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm
-	.\jpegtran -outfile testoutt.jpg testprog.jpg
-	fc /b testimg.ppm testout.ppm
-	fc /b testimg.bmp testout.bmp
-	fc /b testimg.jpg testout.jpg
-	fc /b testimg.ppm testoutp.ppm
-	fc /b testimgp.jpg testoutp.jpg
-	fc /b testorig.jpg testoutt.jpg
-
-
-jcapimin.obj: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcapistd.obj: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jccoefct.obj: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jccolor.obj: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcdctmgr.obj: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jchuff.obj: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h
-jcinit.obj: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmainct.obj: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmarker.obj: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmaster.obj: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcomapi.obj: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcparam.obj: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcphuff.obj: jcphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h
-jcprepct.obj: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcsample.obj: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jctrans.obj: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdapimin.obj: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdapistd.obj: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdatadst.obj: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
-jdatasrc.obj: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
-jdcoefct.obj: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdcolor.obj: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jddctmgr.obj: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jdhuff.obj: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h
-jdinput.obj: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmainct.obj: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmarker.obj: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmaster.obj: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmerge.obj: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdphuff.obj: jdphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h
-jdpostct.obj: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdsample.obj: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdtrans.obj: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jerror.obj: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h
-jfdctflt.obj: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jfdctfst.obj: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jfdctint.obj: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctflt.obj: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctfst.obj: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctint.obj: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctred.obj: jidctred.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jquant1.obj: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jquant2.obj: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jutils.obj: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jmemmgr.obj: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemansi.obj: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemname.obj: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemnobs.obj: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemdos.obj: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemmac.obj: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-cjpeg.obj: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-djpeg.obj: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-jpegtran.obj: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h
-rdjpgcom.obj: rdjpgcom.c jinclude.h jconfig.h
-wrjpgcom.obj: wrjpgcom.c jinclude.h jconfig.h
-cdjpeg.obj: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdcolmap.obj: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdswitch.obj: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-transupp.obj: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h
-rdppm.obj: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrppm.obj: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdgif.obj: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrgif.obj: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdtarga.obj: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrtarga.obj: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdbmp.obj: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrbmp.obj: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdrle.obj: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrrle.obj: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h

Engine/lib/ljpeg/extras/makefile.vms

@@ -1,142 +0,0 @@
-$! Makefile for Independent JPEG Group's software
-$!
-$! This is a command procedure for Digital VMS systems that do not have MMS.
-$! It builds the JPEG software by brute force, recompiling everything whether
-$! or not it is necessary.  It then runs the basic self-test.
-$! Thanks to Rick Dyson ([email protected])
-$! and Tim Bell ([email protected]) for their help.
-$!
-$! Read installation instructions before running this!!
-$!
-$ If F$Mode () .eqs. "INTERACTIVE"
-$   Then
-$       VERIFY = F$Verify (0)
-$   Else
-$       VERIFY = F$Verify (1)
-$ EndIf
-$ On Control_Y Then GoTo End
-$ On Error     Then GoTo End
-$
-$ If F$GetSyi ("HW_MODEL") .gt. 1023 
-$   Then
-$       OPT = ""
-$   Else
-$       OPT = ",Sys$Disk:[]makvms.opt/Option"
-$ EndIf
-$ 
-$ DoCompile := CC /NoDebug /Optimize /NoList
-$!
-$ DoCompile jcapimin.c
-$ DoCompile jcapistd.c
-$ DoCompile jctrans.c
-$ DoCompile jcparam.c
-$ DoCompile jdatadst.c
-$ DoCompile jcinit.c
-$ DoCompile jcmaster.c
-$ DoCompile jcmarker.c
-$ DoCompile jcmainct.c
-$ DoCompile jcprepct.c
-$ DoCompile jccoefct.c
-$ DoCompile jccolor.c
-$ DoCompile jcsample.c
-$ DoCompile jchuff.c
-$ DoCompile jcphuff.c
-$ DoCompile jcdctmgr.c
-$ DoCompile jfdctfst.c
-$ DoCompile jfdctflt.c
-$ DoCompile jfdctint.c
-$ DoCompile jdapimin.c
-$ DoCompile jdapistd.c
-$ DoCompile jdtrans.c
-$ DoCompile jdatasrc.c
-$ DoCompile jdmaster.c
-$ DoCompile jdinput.c
-$ DoCompile jdmarker.c
-$ DoCompile jdhuff.c
-$ DoCompile jdphuff.c
-$ DoCompile jdmainct.c
-$ DoCompile jdcoefct.c
-$ DoCompile jdpostct.c
-$ DoCompile jddctmgr.c
-$ DoCompile jidctfst.c
-$ DoCompile jidctflt.c
-$ DoCompile jidctint.c
-$ DoCompile jidctred.c
-$ DoCompile jdsample.c
-$ DoCompile jdcolor.c
-$ DoCompile jquant1.c
-$ DoCompile jquant2.c
-$ DoCompile jdmerge.c
-$ DoCompile jcomapi.c
-$ DoCompile jutils.c
-$ DoCompile jerror.c
-$ DoCompile jmemmgr.c
-$ DoCompile jmemnobs.c
-$!
-$ Library /Create libjpeg.olb  jcapimin.obj,jcapistd.obj,jctrans.obj, -
-          jcparam.obj,jdatadst.obj,jcinit.obj,jcmaster.obj,jcmarker.obj, -
-          jcmainct.obj,jcprepct.obj,jccoefct.obj,jccolor.obj,jcsample.obj, -
-          jchuff.obj,jcphuff.obj,jcdctmgr.obj,jfdctfst.obj,jfdctflt.obj, -
-          jfdctint.obj,jdapimin.obj,jdapistd.obj,jdtrans.obj,jdatasrc.obj, -
-          jdmaster.obj,jdinput.obj,jdmarker.obj,jdhuff.obj,jdphuff.obj, -
-          jdmainct.obj,jdcoefct.obj,jdpostct.obj,jddctmgr.obj,jidctfst.obj, -
-          jidctflt.obj,jidctint.obj,jidctred.obj,jdsample.obj,jdcolor.obj, -
-          jquant1.obj,jquant2.obj,jdmerge.obj,jcomapi.obj,jutils.obj, -
-          jerror.obj,jmemmgr.obj,jmemnobs.obj
-$!
-$ DoCompile cjpeg.c
-$ DoCompile rdppm.c
-$ DoCompile rdgif.c
-$ DoCompile rdtarga.c
-$ DoCompile rdrle.c
-$ DoCompile rdbmp.c
-$ DoCompile rdswitch.c
-$ DoCompile cdjpeg.c
-$!
-$ Link /NoMap /Executable = cjpeg.exe  cjpeg.obj,rdppm.obj,rdgif.obj, -
-          rdtarga.obj,rdrle.obj,rdbmp.obj,rdswitch.obj,cdjpeg.obj,libjpeg.olb/Library'OPT'
-$!
-$ DoCompile djpeg.c
-$ DoCompile wrppm.c
-$ DoCompile wrgif.c
-$ DoCompile wrtarga.c
-$ DoCompile wrrle.c
-$ DoCompile wrbmp.c
-$ DoCompile rdcolmap.c
-$ DoCompile cdjpeg.c
-$!
-$ Link /NoMap /Executable = djpeg.exe  djpeg.obj,wrppm.obj,wrgif.obj, -
-          wrtarga.obj,wrrle.obj,wrbmp.obj,rdcolmap.obj,cdjpeg.obj,libjpeg.olb/Library'OPT'
-$!
-$ DoCompile jpegtran.c
-$ DoCompile rdswitch.c
-$ DoCompile cdjpeg.c
-$ DoCompile transupp.c
-$!
-$ Link /NoMap /Executable = jpegtran.exe  jpegtran.obj,rdswitch.obj, -
-          cdjpeg.obj,transupp.obj,libjpeg.olb/Library'OPT'
-$!
-$ DoCompile rdjpgcom.c
-$ Link /NoMap /Executable = rdjpgcom.exe  rdjpgcom.obj'OPT'
-$!
-$ DoCompile wrjpgcom.c
-$ Link /NoMap /Executable = wrjpgcom.exe  wrjpgcom.obj'OPT'
-$!
-$! Run the self-test
-$!
-$ mcr sys$disk:[]djpeg -dct int -ppm -outfile testout.ppm testorig.jpg
-$ mcr sys$disk:[]djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg
-$ mcr sys$disk:[]cjpeg -dct int      -outfile testout.jpg testimg.ppm
-$ mcr sys$disk:[]djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg
-$ mcr sys$disk:[]cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm
-$ mcr sys$disk:[]jpegtran -outfile testoutt.jpg testprog.jpg
-$ Backup /Compare/Log testimg.ppm testout.ppm
-$ Backup /Compare/Log testimg.bmp testout.bmp
-$ Backup /Compare/Log testimg.jpg testout.jpg
-$ Backup /Compare/Log testimg.ppm testoutp.ppm
-$ Backup /Compare/Log testimgp.jpg testoutp.jpg
-$ Backup /Compare/Log testorig.jpg testoutt.jpg
-$!
-$End:
-$   If Verify Then Set Verify
-$ Exit

Engine/lib/ljpeg/extras/makefile.wat

@@ -1,233 +0,0 @@
-# Makefile for Independent JPEG Group's software
-
-# This makefile is suitable for Watcom C/C++ 10.0 on MS-DOS (using
-# dos4g extender), OS/2, and Windows NT console mode.
-# Thanks to Janos Haide, [email protected].
-
-# Read installation instructions before saying "wmake" !!
-
-# Uncomment line for desired system
-SYSTEM=DOS
-#SYSTEM=OS2
-#SYSTEM=NT
-
-# The name of your C compiler:
-CC= wcl386
-
-# You may need to adjust these cc options:
-CFLAGS= -4r -ort -wx -zq -bt=$(SYSTEM)
-# Caution: avoid -ol or -ox; these generate bad code with 10.0 or 10.0a.
-# Generally, we recommend defining any configuration symbols in jconfig.h,
-# NOT via -D switches here.
-
-# Link-time cc options:
-!ifeq SYSTEM DOS
-LDFLAGS= -zq -l=dos4g
-!else ifeq SYSTEM OS2
-LDFLAGS= -zq -l=os2v2
-!else ifeq SYSTEM NT
-LDFLAGS= -zq -l=nt
-!endif
-
-# Put here the object file name for the correct system-dependent memory
-# manager file.  jmemnobs should work fine for dos4g or OS/2 environment.
-SYSDEPMEM= jmemnobs.obj
-
-# End of configurable options.
-
-
-# source files: JPEG library proper
-LIBSOURCES= jcapimin.c jcapistd.c jccoefct.c jccolor.c jcdctmgr.c jchuff.c &
-        jcinit.c jcmainct.c jcmarker.c jcmaster.c jcomapi.c jcparam.c &
-        jcphuff.c jcprepct.c jcsample.c jctrans.c jdapimin.c jdapistd.c &
-        jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c jddctmgr.c jdhuff.c &
-        jdinput.c jdmainct.c jdmarker.c jdmaster.c jdmerge.c jdphuff.c &
-        jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c jfdctfst.c &
-        jfdctint.c jidctflt.c jidctfst.c jidctint.c jidctred.c jquant1.c &
-        jquant2.c jutils.c jmemmgr.c
-# memmgr back ends: compile only one of these into a working library
-SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c
-# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom
-APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c &
-        rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c &
-        rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c
-SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES)
-# files included by source files
-INCLUDES= jchuff.h jdhuff.h jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h &
-        jpegint.h jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h
-# documentation, test, and support files
-DOCS= README install.doc usage.doc cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 &
-        wrjpgcom.1 wizard.doc example.c libjpeg.doc structure.doc &
-        coderules.doc filelist.doc change.log
-MKFILES= configure makefile.cfg makefile.ansi makefile.unix makefile.bcc &
-        makefile.mc6 makefile.dj makefile.wat makefile.vc makelib.ds &
-        makeapps.ds makeproj.mac makcjpeg.st makdjpeg.st makljpeg.st &
-        maktjpeg.st makefile.manx makefile.sas makefile.mms makefile.vms &
-        makvms.opt
-CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat &
-        jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas &
-        jconfig.vms
-CONFIGUREFILES= config.guess config.sub install-sh ltconfig ltmain.sh
-OTHERFILES= jconfig.doc ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm
-TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg &
-        testimgp.jpg
-DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) &
-        $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES)
-# library object files common to compression and decompression
-COMOBJECTS= jcomapi.obj jutils.obj jerror.obj jmemmgr.obj $(SYSDEPMEM)
-# compression library object files
-CLIBOBJECTS= jcapimin.obj jcapistd.obj jctrans.obj jcparam.obj jdatadst.obj &
-        jcinit.obj jcmaster.obj jcmarker.obj jcmainct.obj jcprepct.obj &
-        jccoefct.obj jccolor.obj jcsample.obj jchuff.obj jcphuff.obj &
-        jcdctmgr.obj jfdctfst.obj jfdctflt.obj jfdctint.obj
-# decompression library object files
-DLIBOBJECTS= jdapimin.obj jdapistd.obj jdtrans.obj jdatasrc.obj &
-        jdmaster.obj jdinput.obj jdmarker.obj jdhuff.obj jdphuff.obj &
-        jdmainct.obj jdcoefct.obj jdpostct.obj jddctmgr.obj jidctfst.obj &
-        jidctflt.obj jidctint.obj jidctred.obj jdsample.obj jdcolor.obj &
-        jquant1.obj jquant2.obj jdmerge.obj
-# These objectfiles are included in libjpeg.lib
-LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS)
-# object files for sample applications (excluding library files)
-COBJECTS= cjpeg.obj rdppm.obj rdgif.obj rdtarga.obj rdrle.obj rdbmp.obj &
-        rdswitch.obj cdjpeg.obj
-DOBJECTS= djpeg.obj wrppm.obj wrgif.obj wrtarga.obj wrrle.obj wrbmp.obj &
-        rdcolmap.obj cdjpeg.obj
-TROBJECTS= jpegtran.obj rdswitch.obj cdjpeg.obj transupp.obj
-
-
-all: libjpeg.lib cjpeg.exe djpeg.exe jpegtran.exe rdjpgcom.exe wrjpgcom.exe
-
-libjpeg.lib: $(LIBOBJECTS)
-	- del libjpeg.lib
-	* wlib -n libjpeg.lib $(LIBOBJECTS)
-
-cjpeg.exe: $(COBJECTS) libjpeg.lib
-	$(CC) $(LDFLAGS) $(COBJECTS) libjpeg.lib
-
-djpeg.exe: $(DOBJECTS) libjpeg.lib
-	$(CC) $(LDFLAGS) $(DOBJECTS) libjpeg.lib
-
-jpegtran.exe: $(TROBJECTS) libjpeg.lib
-	$(CC) $(LDFLAGS) $(TROBJECTS) libjpeg.lib
-
-rdjpgcom.exe: rdjpgcom.c
-	$(CC) $(CFLAGS) $(LDFLAGS) rdjpgcom.c
-
-wrjpgcom.exe: wrjpgcom.c
-	$(CC) $(CFLAGS) $(LDFLAGS) wrjpgcom.c
-
-.c.obj:
-	$(CC) $(CFLAGS) -c $<
-
-jconfig.h: jconfig.doc
-	echo You must prepare a system-dependent jconfig.h file.
-	echo Please read the installation directions in install.doc.
-	exit 1
-
-clean: .SYMBOLIC
-	- del *.obj
-	- del libjpeg.lib
-	- del cjpeg.exe
-	- del djpeg.exe
-	- del jpegtran.exe
-	- del rdjpgcom.exe
-	- del wrjpgcom.exe
-	- del testout*.*
-
-test: cjpeg.exe djpeg.exe jpegtran.exe  .SYMBOLIC
-	- del testout*.*
-	djpeg -dct int -ppm -outfile testout.ppm  testorig.jpg
-	djpeg -dct int -bmp -colors 256 -outfile testout.bmp  testorig.jpg
-	cjpeg -dct int -outfile testout.jpg  testimg.ppm
-	djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg
-	cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm
-	jpegtran -outfile testoutt.jpg testprog.jpg
-!ifeq SYSTEM DOS
-	fc /b testimg.ppm testout.ppm
-	fc /b testimg.bmp testout.bmp
-	fc /b testimg.jpg testout.jpg
-	fc /b testimg.ppm testoutp.ppm
-	fc /b testimgp.jpg testoutp.jpg
-	fc /b testorig.jpg testoutt.jpg
-!else
-	echo n > n.tmp
-	comp testimg.ppm testout.ppm < n.tmp
-	comp testimg.bmp testout.bmp < n.tmp
-	comp testimg.jpg testout.jpg < n.tmp
-	comp testimg.ppm testoutp.ppm < n.tmp
-	comp testimgp.jpg testoutp.jpg < n.tmp
-	comp testorig.jpg testoutt.jpg < n.tmp
-	del n.tmp
-!endif
-
-
-jcapimin.obj: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcapistd.obj: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jccoefct.obj: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jccolor.obj: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcdctmgr.obj: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jchuff.obj: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h
-jcinit.obj: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmainct.obj: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmarker.obj: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmaster.obj: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcomapi.obj: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcparam.obj: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcphuff.obj: jcphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h
-jcprepct.obj: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcsample.obj: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jctrans.obj: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdapimin.obj: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdapistd.obj: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdatadst.obj: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
-jdatasrc.obj: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
-jdcoefct.obj: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdcolor.obj: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jddctmgr.obj: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jdhuff.obj: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h
-jdinput.obj: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmainct.obj: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmarker.obj: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmaster.obj: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmerge.obj: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdphuff.obj: jdphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h
-jdpostct.obj: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdsample.obj: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdtrans.obj: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jerror.obj: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h
-jfdctflt.obj: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jfdctfst.obj: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jfdctint.obj: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctflt.obj: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctfst.obj: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctint.obj: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctred.obj: jidctred.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jquant1.obj: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jquant2.obj: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jutils.obj: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jmemmgr.obj: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemansi.obj: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemname.obj: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemnobs.obj: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemdos.obj: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemmac.obj: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-cjpeg.obj: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-djpeg.obj: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-jpegtran.obj: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h
-rdjpgcom.obj: rdjpgcom.c jinclude.h jconfig.h
-wrjpgcom.obj: wrjpgcom.c jinclude.h jconfig.h
-cdjpeg.obj: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdcolmap.obj: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdswitch.obj: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-transupp.obj: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h
-rdppm.obj: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrppm.obj: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdgif.obj: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrgif.obj: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdtarga.obj: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrtarga.obj: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdbmp.obj: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrbmp.obj: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdrle.obj: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrrle.obj: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h

Engine/lib/ljpeg/extras/makelib.ds

@@ -1,1046 +0,0 @@
-# Microsoft Developer Studio Generated NMAKE File, Format Version 4.20
-# ** DO NOT EDIT **
-
-# TARGTYPE "Win32 (x86) Static Library" 0x0104
-
-!IF "$(CFG)" == ""
-CFG=jpeg - Win32
-!MESSAGE No configuration specified.  Defaulting to jpeg - Win32.
-!ENDIF 
-
-!IF "$(CFG)" != "jpeg - Win32"
-!MESSAGE Invalid configuration "$(CFG)" specified.
-!MESSAGE You can specify a configuration when running NMAKE on this makefile
-!MESSAGE by defining the macro CFG on the command line.  For example:
-!MESSAGE 
-!MESSAGE NMAKE /f "jpeg.mak" CFG="jpeg - Win32"
-!MESSAGE 
-!MESSAGE Possible choices for configuration are:
-!MESSAGE 
-!MESSAGE "jpeg - Win32" (based on "Win32 (x86) Static Library")
-!MESSAGE 
-!ERROR An invalid configuration is specified.
-!ENDIF 
-
-!IF "$(OS)" == "Windows_NT"
-NULL=
-!ELSE 
-NULL=nul
-!ENDIF 
-################################################################################
-# Begin Project
-# PROP Target_Last_Scanned "jpeg - Win32"
-CPP=cl.exe
-
-!IF  "$(CFG)" == "jpeg - Win32"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "Release"
-# PROP BASE Intermediate_Dir "Release"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "Release"
-# PROP Intermediate_Dir "Release"
-# PROP Target_Dir ""
-OUTDIR=.\Release
-INTDIR=.\Release
-
-ALL : "$(OUTDIR)\jpeg.lib"
-
-CLEAN : 
-	-@erase "$(INTDIR)\jcapimin.obj"
-	-@erase "$(INTDIR)\jcapistd.obj"
-	-@erase "$(INTDIR)\jctrans.obj"
-	-@erase "$(INTDIR)\jcparam.obj"
-	-@erase "$(INTDIR)\jdatadst.obj"
-	-@erase "$(INTDIR)\jcinit.obj"
-	-@erase "$(INTDIR)\jcmaster.obj"
-	-@erase "$(INTDIR)\jcmarker.obj"
-	-@erase "$(INTDIR)\jcmainct.obj"
-	-@erase "$(INTDIR)\jcprepct.obj"
-	-@erase "$(INTDIR)\jccoefct.obj"
-	-@erase "$(INTDIR)\jccolor.obj"
-	-@erase "$(INTDIR)\jcsample.obj"
-	-@erase "$(INTDIR)\jchuff.obj"
-	-@erase "$(INTDIR)\jcphuff.obj"
-	-@erase "$(INTDIR)\jcdctmgr.obj"
-	-@erase "$(INTDIR)\jfdctfst.obj"
-	-@erase "$(INTDIR)\jfdctflt.obj"
-	-@erase "$(INTDIR)\jfdctint.obj"
-	-@erase "$(INTDIR)\jdapimin.obj"
-	-@erase "$(INTDIR)\jdapistd.obj"
-	-@erase "$(INTDIR)\jdtrans.obj"
-	-@erase "$(INTDIR)\jdatasrc.obj"
-	-@erase "$(INTDIR)\jdmaster.obj"
-	-@erase "$(INTDIR)\jdinput.obj"
-	-@erase "$(INTDIR)\jdmarker.obj"
-	-@erase "$(INTDIR)\jdhuff.obj"
-	-@erase "$(INTDIR)\jdphuff.obj"
-	-@erase "$(INTDIR)\jdmainct.obj"
-	-@erase "$(INTDIR)\jdcoefct.obj"
-	-@erase "$(INTDIR)\jdpostct.obj"
-	-@erase "$(INTDIR)\jddctmgr.obj"
-	-@erase "$(INTDIR)\jidctfst.obj"
-	-@erase "$(INTDIR)\jidctflt.obj"
-	-@erase "$(INTDIR)\jidctint.obj"
-	-@erase "$(INTDIR)\jidctred.obj"
-	-@erase "$(INTDIR)\jdsample.obj"
-	-@erase "$(INTDIR)\jdcolor.obj"
-	-@erase "$(INTDIR)\jquant1.obj"
-	-@erase "$(INTDIR)\jquant2.obj"
-	-@erase "$(INTDIR)\jdmerge.obj"
-	-@erase "$(INTDIR)\jcomapi.obj"
-	-@erase "$(INTDIR)\jutils.obj"
-	-@erase "$(INTDIR)\jerror.obj"
-	-@erase "$(INTDIR)\jmemmgr.obj"
-	-@erase "$(INTDIR)\jmemnobs.obj"
-	-@erase "$(OUTDIR)\jpeg.lib"
-
-"$(OUTDIR)" :
-    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
-
-# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /YX /c
-# ADD CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /YX /c
-CPP_PROJ=/nologo /ML /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS"\
- /Fp"$(INTDIR)/jpeg.pch" /YX /Fo"$(INTDIR)/" /c 
-CPP_OBJS=.\Release/
-CPP_SBRS=.\.
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-BSC32_FLAGS=/nologo /o"$(OUTDIR)/jpeg.bsc" 
-BSC32_SBRS= \
-	
-LIB32=link.exe -lib
-# ADD BASE LIB32 /nologo
-# ADD LIB32 /nologo
-LIB32_FLAGS=/nologo /out:"$(OUTDIR)/jpeg.lib" 
-LIB32_OBJS= \
-	"$(INTDIR)\jcapimin.obj" \
-	"$(INTDIR)\jcapistd.obj" \
-	"$(INTDIR)\jctrans.obj" \
-	"$(INTDIR)\jcparam.obj" \
-	"$(INTDIR)\jdatadst.obj" \
-	"$(INTDIR)\jcinit.obj" \
-	"$(INTDIR)\jcmaster.obj" \
-	"$(INTDIR)\jcmarker.obj" \
-	"$(INTDIR)\jcmainct.obj" \
-	"$(INTDIR)\jcprepct.obj" \
-	"$(INTDIR)\jccoefct.obj" \
-	"$(INTDIR)\jccolor.obj" \
-	"$(INTDIR)\jcsample.obj" \
-	"$(INTDIR)\jchuff.obj" \
-	"$(INTDIR)\jcphuff.obj" \
-	"$(INTDIR)\jcdctmgr.obj" \
-	"$(INTDIR)\jfdctfst.obj" \
-	"$(INTDIR)\jfdctflt.obj" \
-	"$(INTDIR)\jfdctint.obj" \
-	"$(INTDIR)\jdapimin.obj" \
-	"$(INTDIR)\jdapistd.obj" \
-	"$(INTDIR)\jdtrans.obj" \
-	"$(INTDIR)\jdatasrc.obj" \
-	"$(INTDIR)\jdmaster.obj" \
-	"$(INTDIR)\jdinput.obj" \
-	"$(INTDIR)\jdmarker.obj" \
-	"$(INTDIR)\jdhuff.obj" \
-	"$(INTDIR)\jdphuff.obj" \
-	"$(INTDIR)\jdmainct.obj" \
-	"$(INTDIR)\jdcoefct.obj" \
-	"$(INTDIR)\jdpostct.obj" \
-	"$(INTDIR)\jddctmgr.obj" \
-	"$(INTDIR)\jidctfst.obj" \
-	"$(INTDIR)\jidctflt.obj" \
-	"$(INTDIR)\jidctint.obj" \
-	"$(INTDIR)\jidctred.obj" \
-	"$(INTDIR)\jdsample.obj" \
-	"$(INTDIR)\jdcolor.obj" \
-	"$(INTDIR)\jquant1.obj" \
-	"$(INTDIR)\jquant2.obj" \
-	"$(INTDIR)\jdmerge.obj" \
-	"$(INTDIR)\jcomapi.obj" \
-	"$(INTDIR)\jutils.obj" \
-	"$(INTDIR)\jerror.obj" \
-	"$(INTDIR)\jmemmgr.obj" \
-	"$(INTDIR)\jmemnobs.obj"
-
-"$(OUTDIR)\jpeg.lib" : "$(OUTDIR)" $(DEF_FILE) $(LIB32_OBJS)
-    $(LIB32) @<<
-  $(LIB32_FLAGS) $(DEF_FLAGS) $(LIB32_OBJS)
-<<
-
-!ENDIF 
-
-.c{$(CPP_OBJS)}.obj:
-   $(CPP) $(CPP_PROJ) $<  
-
-.cpp{$(CPP_OBJS)}.obj:
-   $(CPP) $(CPP_PROJ) $<  
-
-.cxx{$(CPP_OBJS)}.obj:
-   $(CPP) $(CPP_PROJ) $<  
-
-.c{$(CPP_SBRS)}.sbr:
-   $(CPP) $(CPP_PROJ) $<  
-
-.cpp{$(CPP_SBRS)}.sbr:
-   $(CPP) $(CPP_PROJ) $<  
-
-.cxx{$(CPP_SBRS)}.sbr:
-   $(CPP) $(CPP_PROJ) $<  
-
-################################################################################
-# Begin Target
-
-# Name "jpeg - Win32"
-
-!IF  "$(CFG)" == "jpeg - Win32"
-
-!ENDIF 
-
-################################################################################
-# Begin Source File
-
-SOURCE="jcapimin.c"
-DEP_CPP_JCAPI=\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jpegint.h"\
-	"jerror.h"\
-	
-
-"$(INTDIR)\jcapimin.obj" : $(SOURCE) $(DEP_CPP_JCAPI) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jcapistd.c"
-DEP_CPP_JCAPIS=\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jpegint.h"\
-	"jerror.h"\
-	
-
-"$(INTDIR)\jcapistd.obj" : $(SOURCE) $(DEP_CPP_JCAPIS) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jccoefct.c"
-DEP_CPP_JCCOE=\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jpegint.h"\
-	"jerror.h"\
-	
-
-"$(INTDIR)\jccoefct.obj" : $(SOURCE) $(DEP_CPP_JCCOE) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jccolor.c"
-DEP_CPP_JCCOL=\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jpegint.h"\
-	"jerror.h"\
-	
-
-"$(INTDIR)\jccolor.obj" : $(SOURCE) $(DEP_CPP_JCCOL) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jcdctmgr.c"
-DEP_CPP_JCDCT=\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jpegint.h"\
-	"jerror.h"\
-	"jdct.h"\
-	
-
-"$(INTDIR)\jcdctmgr.obj" : $(SOURCE) $(DEP_CPP_JCDCT) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jchuff.c"
-DEP_CPP_JCHUF=\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jpegint.h"\
-	"jerror.h"\
-	"jchuff.h"\
-	
-
-"$(INTDIR)\jchuff.obj" : $(SOURCE) $(DEP_CPP_JCHUF) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jcinit.c"
-DEP_CPP_JCINI=\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jpegint.h"\
-	"jerror.h"\
-	
-
-"$(INTDIR)\jcinit.obj" : $(SOURCE) $(DEP_CPP_JCINI) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jcmainct.c"
-DEP_CPP_JCMAI=\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jpegint.h"\
-	"jerror.h"\
-	
-
-"$(INTDIR)\jcmainct.obj" : $(SOURCE) $(DEP_CPP_JCMAI) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jcmarker.c"
-DEP_CPP_JCMAR=\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jpegint.h"\
-	"jerror.h"\
-	
-
-"$(INTDIR)\jcmarker.obj" : $(SOURCE) $(DEP_CPP_JCMAR) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jcmaster.c"
-DEP_CPP_JCMAS=\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jpegint.h"\
-	"jerror.h"\
-	
-
-"$(INTDIR)\jcmaster.obj" : $(SOURCE) $(DEP_CPP_JCMAS) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jcomapi.c"
-DEP_CPP_JCOMA=\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jpegint.h"\
-	"jerror.h"\
-	
-
-"$(INTDIR)\jcomapi.obj" : $(SOURCE) $(DEP_CPP_JCOMA) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jcparam.c"
-DEP_CPP_JCPAR=\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jpegint.h"\
-	"jerror.h"\
-	
-
-"$(INTDIR)\jcparam.obj" : $(SOURCE) $(DEP_CPP_JCPAR) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jcphuff.c"
-DEP_CPP_JCPHU=\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jpegint.h"\
-	"jerror.h"\
-	"jchuff.h"\
-	
-
-"$(INTDIR)\jcphuff.obj" : $(SOURCE) $(DEP_CPP_JCPHU) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jcprepct.c"
-DEP_CPP_JCPRE=\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jpegint.h"\
-	"jerror.h"\
-	
-
-"$(INTDIR)\jcprepct.obj" : $(SOURCE) $(DEP_CPP_JCPRE) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jcsample.c"
-DEP_CPP_JCSAM=\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jpegint.h"\
-	"jerror.h"\
-	
-
-"$(INTDIR)\jcsample.obj" : $(SOURCE) $(DEP_CPP_JCSAM) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jctrans.c"
-DEP_CPP_JCTRA=\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jpegint.h"\
-	"jerror.h"\
-	
-
-"$(INTDIR)\jctrans.obj" : $(SOURCE) $(DEP_CPP_JCTRA) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jdapimin.c"
-DEP_CPP_JDAPI=\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jpegint.h"\
-	"jerror.h"\
-	
-
-"$(INTDIR)\jdapimin.obj" : $(SOURCE) $(DEP_CPP_JDAPI) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jdapistd.c"
-DEP_CPP_JDAPIS=\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jpegint.h"\
-	"jerror.h"\
-	
-
-"$(INTDIR)\jdapistd.obj" : $(SOURCE) $(DEP_CPP_JDAPIS) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jdatadst.c"
-DEP_CPP_JDATA=\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jerror.h"\
-	
-
-"$(INTDIR)\jdatadst.obj" : $(SOURCE) $(DEP_CPP_JDATA) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jdatasrc.c"
-DEP_CPP_JDATAS=\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jerror.h"\
-	
-
-"$(INTDIR)\jdatasrc.obj" : $(SOURCE) $(DEP_CPP_JDATAS) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jdcoefct.c"
-DEP_CPP_JDCOE=\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jpegint.h"\
-	"jerror.h"\
-	
-
-"$(INTDIR)\jdcoefct.obj" : $(SOURCE) $(DEP_CPP_JDCOE) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jdcolor.c"
-DEP_CPP_JDCOL=\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jpegint.h"\
-	"jerror.h"\
-	
-
-"$(INTDIR)\jdcolor.obj" : $(SOURCE) $(DEP_CPP_JDCOL) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jddctmgr.c"
-DEP_CPP_JDDCT=\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jpegint.h"\
-	"jerror.h"\
-	"jdct.h"\
-	
-
-"$(INTDIR)\jddctmgr.obj" : $(SOURCE) $(DEP_CPP_JDDCT) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jdhuff.c"
-DEP_CPP_JDHUF=\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jpegint.h"\
-	"jerror.h"\
-	"jdhuff.h"\
-	
-
-"$(INTDIR)\jdhuff.obj" : $(SOURCE) $(DEP_CPP_JDHUF) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jdinput.c"
-DEP_CPP_JDINP=\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jpegint.h"\
-	"jerror.h"\
-	
-
-"$(INTDIR)\jdinput.obj" : $(SOURCE) $(DEP_CPP_JDINP) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jdmainct.c"
-DEP_CPP_JDMAI=\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jpegint.h"\
-	"jerror.h"\
-	
-
-"$(INTDIR)\jdmainct.obj" : $(SOURCE) $(DEP_CPP_JDMAI) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jdmarker.c"
-DEP_CPP_JDMAR=\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jpegint.h"\
-	"jerror.h"\
-	
-
-"$(INTDIR)\jdmarker.obj" : $(SOURCE) $(DEP_CPP_JDMAR) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jdmaster.c"
-DEP_CPP_JDMAS=\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jpegint.h"\
-	"jerror.h"\
-	
-
-"$(INTDIR)\jdmaster.obj" : $(SOURCE) $(DEP_CPP_JDMAS) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jdmerge.c"
-DEP_CPP_JDMER=\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jpegint.h"\
-	"jerror.h"\
-	
-
-"$(INTDIR)\jdmerge.obj" : $(SOURCE) $(DEP_CPP_JDMER) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jdphuff.c"
-DEP_CPP_JDPHU=\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jpegint.h"\
-	"jerror.h"\
-	"jdhuff.h"\
-	
-
-"$(INTDIR)\jdphuff.obj" : $(SOURCE) $(DEP_CPP_JDPHU) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jdpostct.c"
-DEP_CPP_JDPOS=\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jpegint.h"\
-	"jerror.h"\
-	
-
-"$(INTDIR)\jdpostct.obj" : $(SOURCE) $(DEP_CPP_JDPOS) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jdsample.c"
-DEP_CPP_JDSAM=\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jpegint.h"\
-	"jerror.h"\
-	
-
-"$(INTDIR)\jdsample.obj" : $(SOURCE) $(DEP_CPP_JDSAM) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jdtrans.c"
-DEP_CPP_JDTRA=\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jpegint.h"\
-	"jerror.h"\
-	
-
-"$(INTDIR)\jdtrans.obj" : $(SOURCE) $(DEP_CPP_JDTRA) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jerror.c"
-DEP_CPP_JERRO=\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jversion.h"\
-	"jerror.h"\
-	
-
-"$(INTDIR)\jerror.obj" : $(SOURCE) $(DEP_CPP_JERRO) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jfdctflt.c"
-DEP_CPP_JFDCT=\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jpegint.h"\
-	"jerror.h"\
-	"jdct.h"\
-	
-
-"$(INTDIR)\jfdctflt.obj" : $(SOURCE) $(DEP_CPP_JFDCT) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jfdctfst.c"
-DEP_CPP_JFDCTF=\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jpegint.h"\
-	"jerror.h"\
-	"jdct.h"\
-	
-
-"$(INTDIR)\jfdctfst.obj" : $(SOURCE) $(DEP_CPP_JFDCTF) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jfdctint.c"
-DEP_CPP_JFDCTI=\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jpegint.h"\
-	"jerror.h"\
-	"jdct.h"\
-	
-
-"$(INTDIR)\jfdctint.obj" : $(SOURCE) $(DEP_CPP_JFDCTI) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jidctflt.c"
-DEP_CPP_JIDCT=\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jpegint.h"\
-	"jerror.h"\
-	"jdct.h"\
-	
-
-"$(INTDIR)\jidctflt.obj" : $(SOURCE) $(DEP_CPP_JIDCT) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jidctfst.c"
-DEP_CPP_JIDCTF=\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jpegint.h"\
-	"jerror.h"\
-	"jdct.h"\
-	
-
-"$(INTDIR)\jidctfst.obj" : $(SOURCE) $(DEP_CPP_JIDCTF) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jidctint.c"
-DEP_CPP_JIDCTI=\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jpegint.h"\
-	"jerror.h"\
-	"jdct.h"\
-	
-
-"$(INTDIR)\jidctint.obj" : $(SOURCE) $(DEP_CPP_JIDCTI) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jidctred.c"
-DEP_CPP_JIDCTR=\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jpegint.h"\
-	"jerror.h"\
-	"jdct.h"\
-	
-
-"$(INTDIR)\jidctred.obj" : $(SOURCE) $(DEP_CPP_JIDCTR) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jquant1.c"
-DEP_CPP_JQUAN=\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jpegint.h"\
-	"jerror.h"\
-	
-
-"$(INTDIR)\jquant1.obj" : $(SOURCE) $(DEP_CPP_JQUAN) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jquant2.c"
-DEP_CPP_JQUANT=\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jpegint.h"\
-	"jerror.h"\
-	
-
-"$(INTDIR)\jquant2.obj" : $(SOURCE) $(DEP_CPP_JQUANT) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jutils.c"
-DEP_CPP_JUTIL=\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jpegint.h"\
-	"jerror.h"\
-	
-
-"$(INTDIR)\jutils.obj" : $(SOURCE) $(DEP_CPP_JUTIL) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jmemmgr.c"
-DEP_CPP_JMEMM=\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jpegint.h"\
-	"jerror.h"\
-	"jmemsys.h"\
-	
-
-"$(INTDIR)\jmemmgr.obj" : $(SOURCE) $(DEP_CPP_JMEMM) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-################################################################################
-# Begin Source File
-
-SOURCE="jmemnobs.c"
-DEP_CPP_JMEMN=\
-	"jinclude.h"\
-	"jconfig.h"\
-	"jpeglib.h"\
-	"jmorecfg.h"\
-	"jpegint.h"\
-	"jerror.h"\
-	"jmemsys.h"\
-	
-
-"$(INTDIR)\jmemnobs.obj" : $(SOURCE) $(DEP_CPP_JMEMN) "$(INTDIR)"
-   $(CPP) $(CPP_PROJ) $(SOURCE)
-
-
-# End Source File
-# End Target
-# End Project
-################################################################################
-

Engine/lib/ljpeg/extras/makeproj.mac

@@ -1,213 +0,0 @@
---
--- makeproj.mac
---
--- This AppleScript builds Code Warrior PRO Release 2 project files for the
--- libjpeg library as well as the test programs 'cjpeg', 'djpeg', 'jpegtran'.
--- (We'd distribute real project files, except they're not text
--- and would create maintenance headaches.)
---
--- The script then compiles and links the library and the test programs.
--- NOTE: if you haven't already created a 'jconfig.h' file, the script
--- automatically copies 'jconfig.mac' to 'jconfig.h'.
---
--- To use this script, you must have AppleScript 1.1 or later installed
--- and a suitable AppleScript editor like Script Editor or Script Debugger
--- (http://www.latenightsw.com). Open this file with your AppleScript
--- editor and execute the "run" command to build the projects.
---
--- Thanks to Dan Sears and Don Agro for this script.
--- Questions about this script can be addressed to [email protected]
---
-
-on run
-
-	choose folder with prompt ">>> Select IJG source folder <<<"
-	set ijg_folder to result
-
-	choose folder with prompt ">>> Select MetroWerks folder <<<"
-	set cw_folder to result
-
-	-- if jconfig.h doesn't already exist, copy jconfig.mac
-
-	tell application "Finder"
-		if not (exists file "jconfig.h" of ijg_folder) then
-			duplicate {file "jconfig.mac" of folder ijg_folder}
-			select file "jconfig.mac copy" of folder ijg_folder
-			set name of selection to "jconfig.h"
-		end if
-	end tell
-
-	tell application "CodeWarrior IDE 2.1"
-	  with timeout of 10000 seconds
-
-		-- create libjpeg project
-
-		activate
-		Create Project (ijg_folder as string) & "libjpeg.proj"
-		Set Preferences of panel "Target Settings" to {Target Name:"libjpeg"}
-		Set Preferences of panel "PPC Project" to {File Name:"libjpeg"}
-		Set Preferences of panel "Target Settings" to {Linker:"MacOS PPC Linker"}
-		Set Preferences of panel "PPC Project" to {Project Type:library}
-		Set Preferences of panel "C/C++ Compiler" to {ANSI Strict:true}
-		Set Preferences of panel "C/C++ Compiler" to {Enums Always Ints:true}
-		Set Preferences of panel "PPC Codegen" to {Struct Alignment:PowerPC}
-		Set Preferences of panel "PPC Linker" to {Generate SYM File:false}
-
-		Add Files (ijg_folder as string) & "jcapimin.c" To Segment 1
-		Add Files (ijg_folder as string) & "jcapistd.c" To Segment 1
-		Add Files (ijg_folder as string) & "jctrans.c" To Segment 1
-		Add Files (ijg_folder as string) & "jcparam.c" To Segment 1
-		Add Files (ijg_folder as string) & "jdatadst.c" To Segment 1
-		Add Files (ijg_folder as string) & "jcinit.c" To Segment 1
-		Add Files (ijg_folder as string) & "jcmaster.c" To Segment 1
-		Add Files (ijg_folder as string) & "jcmarker.c" To Segment 1
-		Add Files (ijg_folder as string) & "jcmainct.c" To Segment 1
-		Add Files (ijg_folder as string) & "jcprepct.c" To Segment 1
-		Add Files (ijg_folder as string) & "jccoefct.c" To Segment 1
-		Add Files (ijg_folder as string) & "jccolor.c" To Segment 1
-		Add Files (ijg_folder as string) & "jcsample.c" To Segment 1
-		Add Files (ijg_folder as string) & "jchuff.c" To Segment 1
-		Add Files (ijg_folder as string) & "jcphuff.c" To Segment 1
-		Add Files (ijg_folder as string) & "jcdctmgr.c" To Segment 1
-		Add Files (ijg_folder as string) & "jfdctfst.c" To Segment 1
-		Add Files (ijg_folder as string) & "jfdctflt.c" To Segment 1
-		Add Files (ijg_folder as string) & "jfdctint.c" To Segment 1
-		Add Files (ijg_folder as string) & "jdapimin.c" To Segment 1
-		Add Files (ijg_folder as string) & "jdapistd.c" To Segment 1
-		Add Files (ijg_folder as string) & "jdtrans.c" To Segment 1
-		Add Files (ijg_folder as string) & "jdatasrc.c" To Segment 1
-		Add Files (ijg_folder as string) & "jdmaster.c" To Segment 1
-		Add Files (ijg_folder as string) & "jdinput.c" To Segment 1
-		Add Files (ijg_folder as string) & "jdmarker.c" To Segment 1
-		Add Files (ijg_folder as string) & "jdhuff.c" To Segment 1
-		Add Files (ijg_folder as string) & "jdphuff.c" To Segment 1
-		Add Files (ijg_folder as string) & "jdmainct.c" To Segment 1
-		Add Files (ijg_folder as string) & "jdcoefct.c" To Segment 1
-		Add Files (ijg_folder as string) & "jdpostct.c" To Segment 1
-		Add Files (ijg_folder as string) & "jddctmgr.c" To Segment 1
-		Add Files (ijg_folder as string) & "jidctfst.c" To Segment 1
-		Add Files (ijg_folder as string) & "jidctflt.c" To Segment 1
-		Add Files (ijg_folder as string) & "jidctint.c" To Segment 1
-		Add Files (ijg_folder as string) & "jidctred.c" To Segment 1
-		Add Files (ijg_folder as string) & "jdsample.c" To Segment 1
-		Add Files (ijg_folder as string) & "jdcolor.c" To Segment 1
-		Add Files (ijg_folder as string) & "jquant1.c" To Segment 1
-		Add Files (ijg_folder as string) & "jquant2.c" To Segment 1
-		Add Files (ijg_folder as string) & "jdmerge.c" To Segment 1
-		Add Files (ijg_folder as string) & "jcomapi.c" To Segment 1
-		Add Files (ijg_folder as string) & "jutils.c" To Segment 1
-		Add Files (ijg_folder as string) & "jerror.c" To Segment 1
-		Add Files (ijg_folder as string) & "jmemmgr.c" To Segment 1
-		Add Files (ijg_folder as string) & "jmemmac.c" To Segment 1
-
-		-- compile and link the library
-
-		Make Project
-		Close Project
-
-		-- create cjpeg project
-
-		activate
-		Create Project (ijg_folder as string) & "cjpeg.proj"
-		Set Preferences of panel "Target Settings" to {Target Name:"cjpeg"}
-		Set Preferences of panel "PPC Project" to {File Name:"cjpeg"}
-		Set Preferences of panel "Target Settings" to {Linker:"MacOS PPC Linker"}
-		Set Preferences of panel "C/C++ Compiler" to {ANSI Strict:true}
-		Set Preferences of panel "C/C++ Compiler" to {Enums Always Ints:true}
-		Set Preferences of panel "PPC Codegen" to {Struct Alignment:PowerPC}
-		Set Preferences of panel "PPC Linker" to {Generate SYM File:false}
-
-		Add Files (ijg_folder as string) & "cjpeg.c" To Segment 1
-		Add Files (ijg_folder as string) & "rdppm.c" To Segment 1
-		Add Files (ijg_folder as string) & "rdgif.c" To Segment 1
-		Add Files (ijg_folder as string) & "rdtarga.c" To Segment 1
-		Add Files (ijg_folder as string) & "rdrle.c" To Segment 1
-		Add Files (ijg_folder as string) & "rdbmp.c" To Segment 1
-		Add Files (ijg_folder as string) & "rdswitch.c" To Segment 1
-		Add Files (ijg_folder as string) & "cdjpeg.c" To Segment 1
-
-		Add Files (ijg_folder as string) & "libjpeg" To Segment 2
-
-		Add Files (cw_folder as string) & "Metrowerks CodeWarrior:Metrowerks Standard Library:MSL C:Bin:MSL C.PPC.Lib" To Segment 3
-		Add Files (cw_folder as string) & "Metrowerks CodeWarrior:Metrowerks Standard Library:MSL C:Bin:MSL SIOUX.PPC.Lib" To Segment 3
-		Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:Runtime:Runtime PPC:MSL RuntimePPC.Lib" To Segment 3
-
-		Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:MacOS Common:InterfaceLib" To Segment 4
-		Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:MacOS Common:MathLib" To Segment 4
-
-		-- compile and link cjpeg
-
-		Make Project
-		Close Project
-
-		-- create djpeg project
-
-		activate
-		Create Project (ijg_folder as string) & "djpeg.proj"
-		Set Preferences of panel "Target Settings" to {Target Name:"djpeg"}
-		Set Preferences of panel "PPC Project" to {File Name:"djpeg"}
-		Set Preferences of panel "Target Settings" to {Linker:"MacOS PPC Linker"}
-		Set Preferences of panel "C/C++ Compiler" to {ANSI Strict:true}
-		Set Preferences of panel "C/C++ Compiler" to {Enums Always Ints:true}
-		Set Preferences of panel "PPC Codegen" to {Struct Alignment:PowerPC}
-		Set Preferences of panel "PPC Linker" to {Generate SYM File:false}
-
-		Add Files (ijg_folder as string) & "djpeg.c" To Segment 1
-		Add Files (ijg_folder as string) & "wrppm.c" To Segment 1
-		Add Files (ijg_folder as string) & "wrgif.c" To Segment 1
-		Add Files (ijg_folder as string) & "wrtarga.c" To Segment 1
-		Add Files (ijg_folder as string) & "wrrle.c" To Segment 1
-		Add Files (ijg_folder as string) & "wrbmp.c" To Segment 1
-		Add Files (ijg_folder as string) & "rdcolmap.c" To Segment 1
-		Add Files (ijg_folder as string) & "cdjpeg.c" To Segment 1
-
-		Add Files (ijg_folder as string) & "libjpeg" To Segment 2
-
-		Add Files (cw_folder as string) & "Metrowerks CodeWarrior:Metrowerks Standard Library:MSL C:Bin:MSL C.PPC.Lib" To Segment 3
-		Add Files (cw_folder as string) & "Metrowerks CodeWarrior:Metrowerks Standard Library:MSL C:Bin:MSL SIOUX.PPC.Lib" To Segment 3
-		Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:Runtime:Runtime PPC:MSL RuntimePPC.Lib" To Segment 3
-
-		Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:MacOS Common:InterfaceLib" To Segment 4
-		Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:MacOS Common:MathLib" To Segment 4
-
-		-- compile and link djpeg
-
-		Make Project
-		Close Project
-
-		-- create jpegtran project
-
-		activate
-		Create Project (ijg_folder as string) & "jpegtran.proj"
-		Set Preferences of panel "Target Settings" to {Target Name:"jpegtran"}
-		Set Preferences of panel "PPC Project" to {File Name:"jpegtran"}
-		Set Preferences of panel "Target Settings" to {Linker:"MacOS PPC Linker"}
-		Set Preferences of panel "C/C++ Compiler" to {ANSI Strict:true}
-		Set Preferences of panel "C/C++ Compiler" to {Enums Always Ints:true}
-		Set Preferences of panel "PPC Codegen" to {Struct Alignment:PowerPC}
-		Set Preferences of panel "PPC Linker" to {Generate SYM File:false}
-
-		Add Files (ijg_folder as string) & "jpegtran.c" To Segment 1
-		Add Files (ijg_folder as string) & "rdswitch.c" To Segment 1
-		Add Files (ijg_folder as string) & "cdjpeg.c" To Segment 1
-		Add Files (ijg_folder as string) & "transupp.c" To Segment 1
-
-		Add Files (ijg_folder as string) & "libjpeg" To Segment 2
-
-		Add Files (cw_folder as string) & "Metrowerks CodeWarrior:Metrowerks Standard Library:MSL C:Bin:MSL C.PPC.Lib" To Segment 3
-		Add Files (cw_folder as string) & "Metrowerks CodeWarrior:Metrowerks Standard Library:MSL C:Bin:MSL SIOUX.PPC.Lib" To Segment 3
-		Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:Runtime:Runtime PPC:MSL RuntimePPC.Lib" To Segment 3
-
-		Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:MacOS Common:InterfaceLib" To Segment 4
-		Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:MacOS Common:MathLib" To Segment 4
-
-		-- compile and link jpegtran
-
-		Make Project
-		Close Project
-
-		quit
-
-	  end timeout
-	end tell
-end run

Engine/lib/ljpeg/extras/makljpeg.st

@@ -1,70 +0,0 @@
-; Project file for Independent JPEG Group's software
-;
-; This project file is for Atari ST/STE/TT systems using Pure C or Turbo C.
-; Thanks to Frank Moehle ([email protected]),
-; Dr. B. Setzepfandt ([email protected]),
-; and Guido Vollbeding ([email protected]).
-;
-; To use this file, rename it to libjpeg.prj.
-; Read installation instructions before trying to make the program!
-;
-;
-;      * * * Output file * * *
-libjpeg.lib
-;
-; * * * COMPILER OPTIONS * * *  
-.C[-P]        ; absolute calls
-.C[-M]        ; and no string merging, folks
-.C[-w-cln]    ; no "constant is long" warnings
-.C[-w-par]    ; no "parameter xxxx unused"
-.C[-w-rch]    ; no "unreachable code"
-.C[-wsig]     ; warn if significant digits may be lost
-.L[-J]        ; link new Obj-format (so we get a library)
-=
-; * * * * List of modules * * * * 
-jcapimin.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
-jcapistd.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
-jccoefct.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
-jccolor.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
-jcdctmgr.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h)
-jchuff.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jchuff.h)
-jcinit.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
-jcmainct.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
-jcmarker.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
-jcmaster.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
-jcomapi.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
-jcparam.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
-jcphuff.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jchuff.h)
-jcprepct.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
-jcsample.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
-jctrans.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
-jdapimin.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
-jdapistd.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
-jdatadst.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h)
-jdatasrc.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h)
-jdcoefct.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
-jdcolor.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
-jddctmgr.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h)
-jdhuff.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdhuff.h)
-jdinput.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
-jdmainct.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
-jdmarker.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
-jdmaster.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
-jdmerge.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
-jdphuff.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdhuff.h)
-jdpostct.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
-jdsample.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
-jdtrans.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
-jerror.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jversion.h,jerror.h)
-jfdctflt.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h)
-jfdctfst.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h)
-jfdctint.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h)
-jidctflt.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h)
-jidctfst.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h)
-jidctint.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h)
-jidctred.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h)
-jquant1.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
-jquant2.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
-jutils.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h)
-jmemmgr.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jmemsys.h)
-jmemansi.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jmemsys.h)

Engine/lib/ljpeg/extras/maktjpeg.st

@@ -1,32 +0,0 @@
-; Project file for Independent JPEG Group's software
-;
-; This project file is for Atari ST/STE/TT systems using Pure C or Turbo C.
-; Thanks to Frank Moehle ([email protected]),
-; Dr. B. Setzepfandt ([email protected]),
-; and Guido Vollbeding ([email protected]).
-;
-; To use this file, rename it to jpegtran.prj.
-; If you are using Turbo C, change filenames beginning with "pc..." to "tc..."
-; Read installation instructions before trying to make the program!
-;
-;
-;      * * * Output file * * *
-jpegtran.ttp
-;
-; * * * COMPILER OPTIONS * * *  
-.C[-P]        ; absolute calls
-.C[-M]        ; and no string merging, folks
-.C[-w-cln]    ; no "constant is long" warnings
-.C[-w-par]    ; no "parameter xxxx unused"
-.C[-w-rch]    ; no "unreachable code"
-.C[-wsig]     ; warn if significant digits may be lost
-=
-; * * * * List of modules * * * * 
-pcstart.o
-jpegtran.c	(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h,transupp.h,jversion.h)
-cdjpeg.c	(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
-rdswitch.c	(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
-transupp.c	(jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,transupp.h)
-libjpeg.lib        ; built by libjpeg.prj
-pcstdlib.lib       ; standard library
-pcextlib.lib       ; extended library

Engine/lib/ljpeg/extras/makvms.opt

@@ -1,4 +0,0 @@
-! A pointer to the VAX/VMS C Run-Time Shareable Library.
-! This file is needed by makefile.mms and makefile.vms,
-! but only for the older VAX C compiler.  DEC C does not need it.
-Sys$Library:VAXCRTL.EXE /Share

Engine/lib/ljpeg/extras/rdbmp.c

@@ -1,439 +0,0 @@
-/*
- * rdbmp.c
- *
- * Copyright (C) 1994-1996, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains routines to read input images in Microsoft "BMP"
- * format (MS Windows 3.x, OS/2 1.x, and OS/2 2.x flavors).
- * Currently, only 8-bit and 24-bit images are supported, not 1-bit or
- * 4-bit (feeding such low-depth images into JPEG would be silly anyway).
- * Also, we don't support RLE-compressed files.
- *
- * These routines may need modification for non-Unix environments or
- * specialized applications.  As they stand, they assume input from
- * an ordinary stdio stream.  They further assume that reading begins
- * at the start of the file; start_input may need work if the
- * user interface has already read some data (e.g., to determine that
- * the file is indeed BMP format).
- *
- * This code contributed by James Arthur Boucher.
- */
-
-#include "cdjpeg.h"		/* Common decls for cjpeg/djpeg applications */
-
-#ifdef BMP_SUPPORTED
-
-
-/* Macros to deal with unsigned chars as efficiently as compiler allows */
-
-#ifdef HAVE_UNSIGNED_CHAR
-typedef unsigned char U_CHAR;
-#define UCH(x)	((int) (x))
-#else /* !HAVE_UNSIGNED_CHAR */
-#ifdef CHAR_IS_UNSIGNED
-typedef char U_CHAR;
-#define UCH(x)	((int) (x))
-#else
-typedef char U_CHAR;
-#define UCH(x)	((int) (x) & 0xFF)
-#endif
-#endif /* HAVE_UNSIGNED_CHAR */
-
-
-#define	ReadOK(file,buffer,len)	(JFREAD(file,buffer,len) == ((size_t) (len)))
-
-
-/* Private version of data source object */
-
-typedef struct _bmp_source_struct * bmp_source_ptr;
-
-typedef struct _bmp_source_struct {
-  struct cjpeg_source_struct pub; /* public fields */
-
-  j_compress_ptr cinfo;		/* back link saves passing separate parm */
-
-  JSAMPARRAY colormap;		/* BMP colormap (converted to my format) */
-
-  jvirt_sarray_ptr whole_image;	/* Needed to reverse row order */
-  JDIMENSION source_row;	/* Current source row number */
-  JDIMENSION row_width;		/* Physical width of scanlines in file */
-
-  int bits_per_pixel;		/* remembers 8- or 24-bit format */
-} bmp_source_struct;
-
-
-LOCAL(int)
-read_byte (bmp_source_ptr sinfo)
-/* Read next byte from BMP file */
-{
-  register FILE *infile = sinfo->pub.input_file;
-  register int c;
-
-  if ((c = getc(infile)) == EOF)
-    ERREXIT(sinfo->cinfo, JERR_INPUT_EOF);
-  return c;
-}
-
-
-LOCAL(void)
-read_colormap (bmp_source_ptr sinfo, int cmaplen, int mapentrysize)
-/* Read the colormap from a BMP file */
-{
-  int i;
-
-  switch (mapentrysize) {
-  case 3:
-    /* BGR format (occurs in OS/2 files) */
-    for (i = 0; i < cmaplen; i++) {
-      sinfo->colormap[2][i] = (JSAMPLE) read_byte(sinfo);
-      sinfo->colormap[1][i] = (JSAMPLE) read_byte(sinfo);
-      sinfo->colormap[0][i] = (JSAMPLE) read_byte(sinfo);
-    }
-    break;
-  case 4:
-    /* BGR0 format (occurs in MS Windows files) */
-    for (i = 0; i < cmaplen; i++) {
-      sinfo->colormap[2][i] = (JSAMPLE) read_byte(sinfo);
-      sinfo->colormap[1][i] = (JSAMPLE) read_byte(sinfo);
-      sinfo->colormap[0][i] = (JSAMPLE) read_byte(sinfo);
-      (void) read_byte(sinfo);
-    }
-    break;
-  default:
-    ERREXIT(sinfo->cinfo, JERR_BMP_BADCMAP);
-    break;
-  }
-}
-
-
-/*
- * Read one row of pixels.
- * The image has been read into the whole_image array, but is otherwise
- * unprocessed.  We must read it out in top-to-bottom row order, and if
- * it is an 8-bit image, we must expand colormapped pixels to 24bit format.
- */
-
-METHODDEF(JDIMENSION)
-get_8bit_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
-/* This version is for reading 8-bit colormap indexes */
-{
-  bmp_source_ptr source = (bmp_source_ptr) sinfo;
-  register JSAMPARRAY colormap = source->colormap;
-  JSAMPARRAY image_ptr;
-  register int t;
-  register JSAMPROW inptr, outptr;
-  register JDIMENSION col;
-
-  /* Fetch next row from virtual array */
-  source->source_row--;
-  image_ptr = (*cinfo->mem->access_virt_sarray)
-    ((j_common_ptr) cinfo, source->whole_image,
-     source->source_row, (JDIMENSION) 1, FALSE);
-
-  /* Expand the colormap indexes to real data */
-  inptr = image_ptr[0];
-  outptr = source->pub.buffer[0];
-  for (col = cinfo->image_width; col > 0; col--) {
-    t = GETJSAMPLE(*inptr++);
-    *outptr++ = colormap[0][t];	/* can omit GETJSAMPLE() safely */
-    *outptr++ = colormap[1][t];
-    *outptr++ = colormap[2][t];
-  }
-
-  return 1;
-}
-
-
-METHODDEF(JDIMENSION)
-get_24bit_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
-/* This version is for reading 24-bit pixels */
-{
-  bmp_source_ptr source = (bmp_source_ptr) sinfo;
-  JSAMPARRAY image_ptr;
-  register JSAMPROW inptr, outptr;
-  register JDIMENSION col;
-
-  /* Fetch next row from virtual array */
-  source->source_row--;
-  image_ptr = (*cinfo->mem->access_virt_sarray)
-    ((j_common_ptr) cinfo, source->whole_image,
-     source->source_row, (JDIMENSION) 1, FALSE);
-
-  /* Transfer data.  Note source values are in BGR order
-   * (even though Microsoft's own documents say the opposite).
-   */
-  inptr = image_ptr[0];
-  outptr = source->pub.buffer[0];
-  for (col = cinfo->image_width; col > 0; col--) {
-    outptr[2] = *inptr++;	/* can omit GETJSAMPLE() safely */
-    outptr[1] = *inptr++;
-    outptr[0] = *inptr++;
-    outptr += 3;
-  }
-
-  return 1;
-}
-
-
-/*
- * This method loads the image into whole_image during the first call on
- * get_pixel_rows.  The get_pixel_rows pointer is then adjusted to call
- * get_8bit_row or get_24bit_row on subsequent calls.
- */
-
-METHODDEF(JDIMENSION)
-preload_image (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
-{
-  bmp_source_ptr source = (bmp_source_ptr) sinfo;
-  register FILE *infile = source->pub.input_file;
-  register int c;
-  register JSAMPROW out_ptr;
-  JSAMPARRAY image_ptr;
-  JDIMENSION row, col;
-  cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress;
-
-  /* Read the data into a virtual array in input-file row order. */
-  for (row = 0; row < cinfo->image_height; row++) {
-    if (progress != NULL) {
-      progress->pub.pass_counter = (long) row;
-      progress->pub.pass_limit = (long) cinfo->image_height;
-      (*progress->pub.progress_monitor) ((j_common_ptr) cinfo);
-    }
-    image_ptr = (*cinfo->mem->access_virt_sarray)
-      ((j_common_ptr) cinfo, source->whole_image,
-       row, (JDIMENSION) 1, TRUE);
-    out_ptr = image_ptr[0];
-    for (col = source->row_width; col > 0; col--) {
-      /* inline copy of read_byte() for speed */
-      if ((c = getc(infile)) == EOF)
-	ERREXIT(cinfo, JERR_INPUT_EOF);
-      *out_ptr++ = (JSAMPLE) c;
-    }
-  }
-  if (progress != NULL)
-    progress->completed_extra_passes++;
-
-  /* Set up to read from the virtual array in top-to-bottom order */
-  switch (source->bits_per_pixel) {
-  case 8:
-    source->pub.get_pixel_rows = get_8bit_row;
-    break;
-  case 24:
-    source->pub.get_pixel_rows = get_24bit_row;
-    break;
-  default:
-    ERREXIT(cinfo, JERR_BMP_BADDEPTH);
-  }
-  source->source_row = cinfo->image_height;
-
-  /* And read the first row */
-  return (*source->pub.get_pixel_rows) (cinfo, sinfo);
-}
-
-
-/*
- * Read the file header; return image size and component count.
- */
-
-METHODDEF(void)
-start_input_bmp (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
-{
-  bmp_source_ptr source = (bmp_source_ptr) sinfo;
-  U_CHAR bmpfileheader[14];
-  U_CHAR bmpinfoheader[64];
-#define GET_2B(array,offset)  ((unsigned int) UCH(array[offset]) + \
-			       (((unsigned int) UCH(array[offset+1])) << 8))
-#define GET_4B(array,offset)  ((INT32) UCH(array[offset]) + \
-			       (((INT32) UCH(array[offset+1])) << 8) + \
-			       (((INT32) UCH(array[offset+2])) << 16) + \
-			       (((INT32) UCH(array[offset+3])) << 24))
-  INT32 bfOffBits;
-  INT32 headerSize;
-  INT32 biWidth = 0;		/* initialize to avoid compiler warning */
-  INT32 biHeight = 0;
-  unsigned int biPlanes;
-  INT32 biCompression;
-  INT32 biXPelsPerMeter,biYPelsPerMeter;
-  INT32 biClrUsed = 0;
-  int mapentrysize = 0;		/* 0 indicates no colormap */
-  INT32 bPad;
-  JDIMENSION row_width;
-
-  /* Read and verify the bitmap file header */
-  if (! ReadOK(source->pub.input_file, bmpfileheader, 14))
-    ERREXIT(cinfo, JERR_INPUT_EOF);
-  if (GET_2B(bmpfileheader,0) != 0x4D42) /* 'BM' */
-    ERREXIT(cinfo, JERR_BMP_NOT);
-  bfOffBits = (INT32) GET_4B(bmpfileheader,10);
-  /* We ignore the remaining fileheader fields */
-
-  /* The infoheader might be 12 bytes (OS/2 1.x), 40 bytes (Windows),
-   * or 64 bytes (OS/2 2.x).  Check the first 4 bytes to find out which.
-   */
-  if (! ReadOK(source->pub.input_file, bmpinfoheader, 4))
-    ERREXIT(cinfo, JERR_INPUT_EOF);
-  headerSize = (INT32) GET_4B(bmpinfoheader,0);
-  if (headerSize < 12 || headerSize > 64)
-    ERREXIT(cinfo, JERR_BMP_BADHEADER);
-  if (! ReadOK(source->pub.input_file, bmpinfoheader+4, headerSize-4))
-    ERREXIT(cinfo, JERR_INPUT_EOF);
-
-  switch ((int) headerSize) {
-  case 12:
-    /* Decode OS/2 1.x header (Microsoft calls this a BITMAPCOREHEADER) */
-    biWidth = (INT32) GET_2B(bmpinfoheader,4);
-    biHeight = (INT32) GET_2B(bmpinfoheader,6);
-    biPlanes = GET_2B(bmpinfoheader,8);
-    source->bits_per_pixel = (int) GET_2B(bmpinfoheader,10);
-
-    switch (source->bits_per_pixel) {
-    case 8:			/* colormapped image */
-      mapentrysize = 3;		/* OS/2 uses RGBTRIPLE colormap */
-      TRACEMS2(cinfo, 1, JTRC_BMP_OS2_MAPPED, (int) biWidth, (int) biHeight);
-      break;
-    case 24:			/* RGB image */
-      TRACEMS2(cinfo, 1, JTRC_BMP_OS2, (int) biWidth, (int) biHeight);
-      break;
-    default:
-      ERREXIT(cinfo, JERR_BMP_BADDEPTH);
-      break;
-    }
-    if (biPlanes != 1)
-      ERREXIT(cinfo, JERR_BMP_BADPLANES);
-    break;
-  case 40:
-  case 64:
-    /* Decode Windows 3.x header (Microsoft calls this a BITMAPINFOHEADER) */
-    /* or OS/2 2.x header, which has additional fields that we ignore */
-    biWidth = GET_4B(bmpinfoheader,4);
-    biHeight = GET_4B(bmpinfoheader,8);
-    biPlanes = GET_2B(bmpinfoheader,12);
-    source->bits_per_pixel = (int) GET_2B(bmpinfoheader,14);
-    biCompression = GET_4B(bmpinfoheader,16);
-    biXPelsPerMeter = GET_4B(bmpinfoheader,24);
-    biYPelsPerMeter = GET_4B(bmpinfoheader,28);
-    biClrUsed = GET_4B(bmpinfoheader,32);
-    /* biSizeImage, biClrImportant fields are ignored */
-
-    switch (source->bits_per_pixel) {
-    case 8:			/* colormapped image */
-      mapentrysize = 4;		/* Windows uses RGBQUAD colormap */
-      TRACEMS2(cinfo, 1, JTRC_BMP_MAPPED, (int) biWidth, (int) biHeight);
-      break;
-    case 24:			/* RGB image */
-      TRACEMS2(cinfo, 1, JTRC_BMP, (int) biWidth, (int) biHeight);
-      break;
-    default:
-      ERREXIT(cinfo, JERR_BMP_BADDEPTH);
-      break;
-    }
-    if (biPlanes != 1)
-      ERREXIT(cinfo, JERR_BMP_BADPLANES);
-    if (biCompression != 0)
-      ERREXIT(cinfo, JERR_BMP_COMPRESSED);
-
-    if (biXPelsPerMeter > 0 && biYPelsPerMeter > 0) {
-      /* Set JFIF density parameters from the BMP data */
-      cinfo->X_density = (UINT16) (biXPelsPerMeter/100); /* 100 cm per meter */
-      cinfo->Y_density = (UINT16) (biYPelsPerMeter/100);
-      cinfo->density_unit = 2;	/* dots/cm */
-    }
-    break;
-  default:
-    ERREXIT(cinfo, JERR_BMP_BADHEADER);
-    break;
-  }
-
-  /* Compute distance to bitmap data --- will adjust for colormap below */
-  bPad = bfOffBits - (headerSize + 14);
-
-  /* Read the colormap, if any */
-  if (mapentrysize > 0) {
-    if (biClrUsed <= 0)
-      biClrUsed = 256;		/* assume it's 256 */
-    else if (biClrUsed > 256)
-      ERREXIT(cinfo, JERR_BMP_BADCMAP);
-    /* Allocate space to store the colormap */
-    source->colormap = (*cinfo->mem->alloc_sarray)
-      ((j_common_ptr) cinfo, JPOOL_IMAGE,
-       (JDIMENSION) biClrUsed, (JDIMENSION) 3);
-    /* and read it from the file */
-    read_colormap(source, (int) biClrUsed, mapentrysize);
-    /* account for size of colormap */
-    bPad -= biClrUsed * mapentrysize;
-  }
-
-  /* Skip any remaining pad bytes */
-  if (bPad < 0)			/* incorrect bfOffBits value? */
-    ERREXIT(cinfo, JERR_BMP_BADHEADER);
-  while (--bPad >= 0) {
-    (void) read_byte(source);
-  }
-
-  /* Compute row width in file, including padding to 4-byte boundary */
-  if (source->bits_per_pixel == 24)
-    row_width = (JDIMENSION) (biWidth * 3);
-  else
-    row_width = (JDIMENSION) biWidth;
-  while ((row_width & 3) != 0) row_width++;
-  source->row_width = row_width;
-
-  /* Allocate space for inversion array, prepare for preload pass */
-  source->whole_image = (*cinfo->mem->request_virt_sarray)
-    ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE,
-     row_width, (JDIMENSION) biHeight, (JDIMENSION) 1);
-  source->pub.get_pixel_rows = preload_image;
-  if (cinfo->progress != NULL) {
-    cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress;
-    progress->total_extra_passes++; /* count file input as separate pass */
-  }
-
-  /* Allocate one-row buffer for returned data */
-  source->pub.buffer = (*cinfo->mem->alloc_sarray)
-    ((j_common_ptr) cinfo, JPOOL_IMAGE,
-     (JDIMENSION) (biWidth * 3), (JDIMENSION) 1);
-  source->pub.buffer_height = 1;
-
-  cinfo->in_color_space = JCS_RGB;
-  cinfo->input_components = 3;
-  cinfo->data_precision = 8;
-  cinfo->image_width = (JDIMENSION) biWidth;
-  cinfo->image_height = (JDIMENSION) biHeight;
-}
-
-
-/*
- * Finish up at the end of the file.
- */
-
-METHODDEF(void)
-finish_input_bmp (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
-{
-  /* no work */
-}
-
-
-/*
- * The module selection routine for BMP format input.
- */
-
-GLOBAL(cjpeg_source_ptr)
-jinit_read_bmp (j_compress_ptr cinfo)
-{
-  bmp_source_ptr source;
-
-  /* Create module interface object */
-  source = (bmp_source_ptr)
-      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				  SIZEOF(bmp_source_struct));
-  source->cinfo = cinfo;	/* make back link for subroutines */
-  /* Fill in method ptrs, except get_pixel_rows which start_input sets */
-  source->pub.start_input = start_input_bmp;
-  source->pub.finish_input = finish_input_bmp;
-
-  return (cjpeg_source_ptr) source;
-}
-
-#endif /* BMP_SUPPORTED */

Engine/lib/ljpeg/extras/rdcolmap.c

@@ -1,253 +0,0 @@
-/*
- * rdcolmap.c
- *
- * Copyright (C) 1994-1996, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file implements djpeg's "-map file" switch.  It reads a source image
- * and constructs a colormap to be supplied to the JPEG decompressor.
- *
- * Currently, these file formats are supported for the map file:
- *   GIF: the contents of the GIF's global colormap are used.
- *   PPM (either text or raw flavor): the entire file is read and
- *      each unique pixel value is entered in the map.
- * Note that reading a large PPM file will be horrendously slow.
- * Typically, a PPM-format map file should contain just one pixel
- * of each desired color.  Such a file can be extracted from an
- * ordinary image PPM file with ppmtomap(1).
- *
- * Rescaling a PPM that has a maxval unequal to MAXJSAMPLE is not
- * currently implemented.
- */
-
-#include "cdjpeg.h"		/* Common decls for cjpeg/djpeg applications */
-
-#ifdef QUANT_2PASS_SUPPORTED	/* otherwise can't quantize to supplied map */
-
-/* Portions of this code are based on the PBMPLUS library, which is:
-**
-** Copyright (C) 1988 by Jef Poskanzer.
-**
-** Permission to use, copy, modify, and distribute this software and its
-** documentation for any purpose and without fee is hereby granted, provided
-** that the above copyright notice appear in all copies and that both that
-** copyright notice and this permission notice appear in supporting
-** documentation.  This software is provided "as is" without express or
-** implied warranty.
-*/
-
-
-/*
- * Add a (potentially) new color to the color map.
- */
-
-LOCAL(void)
-add_map_entry (j_decompress_ptr cinfo, int R, int G, int B)
-{
-  JSAMPROW colormap0 = cinfo->colormap[0];
-  JSAMPROW colormap1 = cinfo->colormap[1];
-  JSAMPROW colormap2 = cinfo->colormap[2];
-  int ncolors = cinfo->actual_number_of_colors;
-  int index;
-
-  /* Check for duplicate color. */
-  for (index = 0; index < ncolors; index++) {
-    if (GETJSAMPLE(colormap0[index]) == R &&
-	GETJSAMPLE(colormap1[index]) == G &&
-	GETJSAMPLE(colormap2[index]) == B)
-      return;			/* color is already in map */
-  }
-
-  /* Check for map overflow. */
-  if (ncolors >= (MAXJSAMPLE+1))
-    ERREXIT1(cinfo, JERR_QUANT_MANY_COLORS, (MAXJSAMPLE+1));
-
-  /* OK, add color to map. */
-  colormap0[ncolors] = (JSAMPLE) R;
-  colormap1[ncolors] = (JSAMPLE) G;
-  colormap2[ncolors] = (JSAMPLE) B;
-  cinfo->actual_number_of_colors++;
-}
-
-
-/*
- * Extract color map from a GIF file.
- */
-
-LOCAL(void)
-read_gif_map (j_decompress_ptr cinfo, FILE * infile)
-{
-  int header[13];
-  int i, colormaplen;
-  int R, G, B;
-
-  /* Initial 'G' has already been read by read_color_map */
-  /* Read the rest of the GIF header and logical screen descriptor */
-  for (i = 1; i < 13; i++) {
-    if ((header[i] = getc(infile)) == EOF)
-      ERREXIT(cinfo, JERR_BAD_CMAP_FILE);
-  }
-
-  /* Verify GIF Header */
-  if (header[1] != 'I' || header[2] != 'F')
-    ERREXIT(cinfo, JERR_BAD_CMAP_FILE);
-
-  /* There must be a global color map. */
-  if ((header[10] & 0x80) == 0)
-    ERREXIT(cinfo, JERR_BAD_CMAP_FILE);
-
-  /* OK, fetch it. */
-  colormaplen = 2 << (header[10] & 0x07);
-
-  for (i = 0; i < colormaplen; i++) {
-    R = getc(infile);
-    G = getc(infile);
-    B = getc(infile);
-    if (R == EOF || G == EOF || B == EOF)
-      ERREXIT(cinfo, JERR_BAD_CMAP_FILE);
-    add_map_entry(cinfo,
-		  R << (BITS_IN_JSAMPLE-8),
-		  G << (BITS_IN_JSAMPLE-8),
-		  B << (BITS_IN_JSAMPLE-8));
-  }
-}
-
-
-/* Support routines for reading PPM */
-
-
-LOCAL(int)
-pbm_getc (FILE * infile)
-/* Read next char, skipping over any comments */
-/* A comment/newline sequence is returned as a newline */
-{
-  register int ch;
-  
-  ch = getc(infile);
-  if (ch == '#') {
-    do {
-      ch = getc(infile);
-    } while (ch != '\n' && ch != EOF);
-  }
-  return ch;
-}
-
-
-LOCAL(unsigned int)
-read_pbm_integer (j_decompress_ptr cinfo, FILE * infile)
-/* Read an unsigned decimal integer from the PPM file */
-/* Swallows one trailing character after the integer */
-/* Note that on a 16-bit-int machine, only values up to 64k can be read. */
-/* This should not be a problem in practice. */
-{
-  register int ch;
-  register unsigned int val;
-  
-  /* Skip any leading whitespace */
-  do {
-    ch = pbm_getc(infile);
-    if (ch == EOF)
-      ERREXIT(cinfo, JERR_BAD_CMAP_FILE);
-  } while (ch == ' ' || ch == '\t' || ch == '\n' || ch == '\r');
-  
-  if (ch < '0' || ch > '9')
-    ERREXIT(cinfo, JERR_BAD_CMAP_FILE);
-  
-  val = ch - '0';
-  while ((ch = pbm_getc(infile)) >= '0' && ch <= '9') {
-    val *= 10;
-    val += ch - '0';
-  }
-  return val;
-}
-
-
-/*
- * Extract color map from a PPM file.
- */
-
-LOCAL(void)
-read_ppm_map (j_decompress_ptr cinfo, FILE * infile)
-{
-  int c;
-  unsigned int w, h, maxval, row, col;
-  int R, G, B;
-
-  /* Initial 'P' has already been read by read_color_map */
-  c = getc(infile);		/* save format discriminator for a sec */
-
-  /* while we fetch the remaining header info */
-  w = read_pbm_integer(cinfo, infile);
-  h = read_pbm_integer(cinfo, infile);
-  maxval = read_pbm_integer(cinfo, infile);
-
-  if (w <= 0 || h <= 0 || maxval <= 0) /* error check */
-    ERREXIT(cinfo, JERR_BAD_CMAP_FILE);
-
-  /* For now, we don't support rescaling from an unusual maxval. */
-  if (maxval != (unsigned int) MAXJSAMPLE)
-    ERREXIT(cinfo, JERR_BAD_CMAP_FILE);
-
-  switch (c) {
-  case '3':			/* it's a text-format PPM file */
-    for (row = 0; row < h; row++) {
-      for (col = 0; col < w; col++) {
-	R = read_pbm_integer(cinfo, infile);
-	G = read_pbm_integer(cinfo, infile);
-	B = read_pbm_integer(cinfo, infile);
-	add_map_entry(cinfo, R, G, B);
-      }
-    }
-    break;
-
-  case '6':			/* it's a raw-format PPM file */
-    for (row = 0; row < h; row++) {
-      for (col = 0; col < w; col++) {
-	R = getc(infile);
-	G = getc(infile);
-	B = getc(infile);
-	if (R == EOF || G == EOF || B == EOF)
-	  ERREXIT(cinfo, JERR_BAD_CMAP_FILE);
-	add_map_entry(cinfo, R, G, B);
-      }
-    }
-    break;
-
-  default:
-    ERREXIT(cinfo, JERR_BAD_CMAP_FILE);
-    break;
-  }
-}
-
-
-/*
- * Main entry point from djpeg.c.
- *  Input: opened input file (from file name argument on command line).
- *  Output: colormap and actual_number_of_colors fields are set in cinfo.
- */
-
-GLOBAL(void)
-read_color_map (j_decompress_ptr cinfo, FILE * infile)
-{
-  /* Allocate space for a color map of maximum supported size. */
-  cinfo->colormap = (*cinfo->mem->alloc_sarray)
-    ((j_common_ptr) cinfo, JPOOL_IMAGE,
-     (JDIMENSION) (MAXJSAMPLE+1), (JDIMENSION) 3);
-  cinfo->actual_number_of_colors = 0; /* initialize map to empty */
-
-  /* Read first byte to determine file format */
-  switch (getc(infile)) {
-  case 'G':
-    read_gif_map(cinfo, infile);
-    break;
-  case 'P':
-    read_ppm_map(cinfo, infile);
-    break;
-  default:
-    ERREXIT(cinfo, JERR_BAD_CMAP_FILE);
-    break;
-  }
-}
-
-#endif /* QUANT_2PASS_SUPPORTED */

Engine/lib/ljpeg/extras/rdgif.c

@@ -1,38 +0,0 @@
-/*
- * rdgif.c
- *
- * Copyright (C) 1991-1997, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains routines to read input images in GIF format.
- *
- *****************************************************************************
- * NOTE: to avoid entanglements with Unisys' patent on LZW compression,      *
- * the ability to read GIF files has been removed from the IJG distribution. *
- * Sorry about that.                                                         *
- *****************************************************************************
- *
- * We are required to state that
- *    "The Graphics Interchange Format(c) is the Copyright property of
- *    CompuServe Incorporated. GIF(sm) is a Service Mark property of
- *    CompuServe Incorporated."
- */
-
-#include "cdjpeg.h"		/* Common decls for cjpeg/djpeg applications */
-
-#ifdef GIF_SUPPORTED
-
-/*
- * The module selection routine for GIF format input.
- */
-
-GLOBAL(cjpeg_source_ptr)
-jinit_read_gif (j_compress_ptr cinfo)
-{
-  fprintf(stderr, "GIF input is unsupported for legal reasons.  Sorry.\n");
-  exit(EXIT_FAILURE);
-  return NULL;			/* keep compiler happy */
-}
-
-#endif /* GIF_SUPPORTED */

Engine/lib/ljpeg/extras/rdjpgcom.1

@@ -1,54 +0,0 @@
-.TH RDJPGCOM 1 "11 October 1997"
-.SH NAME
-rdjpgcom \- display text comments from a JPEG file
-.SH SYNOPSIS
-.B rdjpgcom
-[
-.B \-verbose
-]
-[
-.I filename
-]
-.LP
-.SH DESCRIPTION
-.LP
-.B rdjpgcom
-reads the named JPEG/JFIF file, or the standard input if no file is named,
-and prints any text comments found in the file on the standard output.
-.PP
-The JPEG standard allows "comment" (COM) blocks to occur within a JPEG file.
-Although the standard doesn't actually define what COM blocks are for, they
-are widely used to hold user-supplied text strings.  This lets you add
-annotations, titles, index terms, etc to your JPEG files, and later retrieve
-them as text.  COM blocks do not interfere with the image stored in the JPEG
-file.  The maximum size of a COM block is 64K, but you can have as many of
-them as you like in one JPEG file.
-.SH OPTIONS
-.TP
-.B \-verbose
-Causes
-.B rdjpgcom
-to also display the JPEG image dimensions.
-.PP
-Switch names may be abbreviated, and are not case sensitive.
-.SH HINTS
-.B rdjpgcom
-does not depend on the IJG JPEG library.  Its source code is intended as an
-illustration of the minimum amount of code required to parse a JPEG file
-header correctly.
-.PP
-In
-.B \-verbose
-mode,
-.B rdjpgcom
-will also attempt to print the contents of any "APP12" markers as text.
-Some digital cameras produce APP12 markers containing useful textual
-information.  If you like, you can modify the source code to print
-other APPn marker types as well.
-.SH SEE ALSO
-.BR cjpeg (1),
-.BR djpeg (1),
-.BR jpegtran (1),
-.BR wrjpgcom (1)
-.SH AUTHOR
-Independent JPEG Group

Engine/lib/ljpeg/extras/rdjpgcom.c

@@ -1,496 +0,0 @@
-/*
- * rdjpgcom.c
- *
- * Copyright (C) 1994-1997, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains a very simple stand-alone application that displays
- * the text in COM (comment) markers in a JFIF file.
- * This may be useful as an example of the minimum logic needed to parse
- * JPEG markers.
- */
-
-#define JPEG_CJPEG_DJPEG	/* to get the command-line config symbols */
-#include "jinclude.h"		/* get auto-config symbols, <stdio.h> */
-
-#include <ctype.h>		/* to declare isupper(), tolower() */
-#ifdef USE_SETMODE
-#include <fcntl.h>		/* to declare setmode()'s parameter macros */
-/* If you have setmode() but not <io.h>, just delete this line: */
-#include <io.h>			/* to declare setmode() */
-#endif
-
-#ifdef USE_CCOMMAND		/* command-line reader for Macintosh */
-#ifdef __MWERKS__
-#include <SIOUX.h>              /* Metrowerks needs this */
-#include <console.h>		/* ... and this */
-#endif
-#ifdef THINK_C
-#include <console.h>		/* Think declares it here */
-#endif
-#endif
-
-#ifdef DONT_USE_B_MODE		/* define mode parameters for fopen() */
-#define READ_BINARY	"r"
-#else
-#ifdef VMS			/* VMS is very nonstandard */
-#define READ_BINARY	"rb", "ctx=stm"
-#else				/* standard ANSI-compliant case */
-#define READ_BINARY	"rb"
-#endif
-#endif
-
-#ifndef EXIT_FAILURE		/* define exit() codes if not provided */
-#define EXIT_FAILURE  1
-#endif
-#ifndef EXIT_SUCCESS
-#ifdef VMS
-#define EXIT_SUCCESS  1		/* VMS is very nonstandard */
-#else
-#define EXIT_SUCCESS  0
-#endif
-#endif
-
-
-/*
- * These macros are used to read the input file.
- * To reuse this code in another application, you might need to change these.
- */
-
-static FILE * infile;		/* input JPEG file */
-
-/* Return next input byte, or EOF if no more */
-#define NEXTBYTE()  getc(infile)
-
-
-/* Error exit handler */
-#define ERREXIT(msg)  (fprintf(stderr, "%s\n", msg), exit(EXIT_FAILURE))
-
-
-/* Read one byte, testing for EOF */
-static int
-read_1_byte (void)
-{
-  int c;
-
-  c = NEXTBYTE();
-  if (c == EOF)
-    ERREXIT("Premature EOF in JPEG file");
-  return c;
-}
-
-/* Read 2 bytes, convert to unsigned int */
-/* All 2-byte quantities in JPEG markers are MSB first */
-static unsigned int
-read_2_bytes (void)
-{
-  int c1, c2;
-
-  c1 = NEXTBYTE();
-  if (c1 == EOF)
-    ERREXIT("Premature EOF in JPEG file");
-  c2 = NEXTBYTE();
-  if (c2 == EOF)
-    ERREXIT("Premature EOF in JPEG file");
-  return (((unsigned int) c1) << 8) + ((unsigned int) c2);
-}
-
-
-/*
- * JPEG markers consist of one or more 0xFF bytes, followed by a marker
- * code byte (which is not an FF).  Here are the marker codes of interest
- * in this program.  (See jdmarker.c for a more complete list.)
- */
-
-#define M_SOF0  0xC0		/* Start Of Frame N */
-#define M_SOF1  0xC1		/* N indicates which compression process */
-#define M_SOF2  0xC2		/* Only SOF0-SOF2 are now in common use */
-#define M_SOF3  0xC3
-#define M_SOF5  0xC5		/* NB: codes C4 and CC are NOT SOF markers */
-#define M_SOF6  0xC6
-#define M_SOF7  0xC7
-#define M_SOF9  0xC9
-#define M_SOF10 0xCA
-#define M_SOF11 0xCB
-#define M_SOF13 0xCD
-#define M_SOF14 0xCE
-#define M_SOF15 0xCF
-#define M_SOI   0xD8		/* Start Of Image (beginning of datastream) */
-#define M_EOI   0xD9		/* End Of Image (end of datastream) */
-#define M_SOS   0xDA		/* Start Of Scan (begins compressed data) */
-#define M_APP0	0xE0		/* Application-specific marker, type N */
-#define M_APP12	0xEC		/* (we don't bother to list all 16 APPn's) */
-#define M_COM   0xFE		/* COMment */
-
-
-/*
- * Find the next JPEG marker and return its marker code.
- * We expect at least one FF byte, possibly more if the compressor used FFs
- * to pad the file.
- * There could also be non-FF garbage between markers.  The treatment of such
- * garbage is unspecified; we choose to skip over it but emit a warning msg.
- * NB: this routine must not be used after seeing SOS marker, since it will
- * not deal correctly with FF/00 sequences in the compressed image data...
- */
-
-static int
-next_marker (void)
-{
-  int c;
-  int discarded_bytes = 0;
-
-  /* Find 0xFF byte; count and skip any non-FFs. */
-  c = read_1_byte();
-  while (c != 0xFF) {
-    discarded_bytes++;
-    c = read_1_byte();
-  }
-  /* Get marker code byte, swallowing any duplicate FF bytes.  Extra FFs
-   * are legal as pad bytes, so don't count them in discarded_bytes.
-   */
-  do {
-    c = read_1_byte();
-  } while (c == 0xFF);
-
-  if (discarded_bytes != 0) {
-    fprintf(stderr, "Warning: garbage data found in JPEG file\n");
-  }
-
-  return c;
-}
-
-
-/*
- * Read the initial marker, which should be SOI.
- * For a JFIF file, the first two bytes of the file should be literally
- * 0xFF M_SOI.  To be more general, we could use next_marker, but if the
- * input file weren't actually JPEG at all, next_marker might read the whole
- * file and then return a misleading error message...
- */
-
-static int
-first_marker (void)
-{
-  int c1, c2;
-
-  c1 = NEXTBYTE();
-  c2 = NEXTBYTE();
-  if (c1 != 0xFF || c2 != M_SOI)
-    ERREXIT("Not a JPEG file");
-  return c2;
-}
-
-
-/*
- * Most types of marker are followed by a variable-length parameter segment.
- * This routine skips over the parameters for any marker we don't otherwise
- * want to process.
- * Note that we MUST skip the parameter segment explicitly in order not to
- * be fooled by 0xFF bytes that might appear within the parameter segment;
- * such bytes do NOT introduce new markers.
- */
-
-static void
-skip_variable (void)
-/* Skip over an unknown or uninteresting variable-length marker */
-{
-  unsigned int length;
-
-  /* Get the marker parameter length count */
-  length = read_2_bytes();
-  /* Length includes itself, so must be at least 2 */
-  if (length < 2)
-    ERREXIT("Erroneous JPEG marker length");
-  length -= 2;
-  /* Skip over the remaining bytes */
-  while (length > 0) {
-    (void) read_1_byte();
-    length--;
-  }
-}
-
-
-/*
- * Process a COM marker.
- * We want to print out the marker contents as legible text;
- * we must guard against non-text junk and varying newline representations.
- */
-
-static void
-process_COM (void)
-{
-  unsigned int length;
-  int ch;
-  int lastch = 0;
-
-  /* Get the marker parameter length count */
-  length = read_2_bytes();
-  /* Length includes itself, so must be at least 2 */
-  if (length < 2)
-    ERREXIT("Erroneous JPEG marker length");
-  length -= 2;
-
-  while (length > 0) {
-    ch = read_1_byte();
-    /* Emit the character in a readable form.
-     * Nonprintables are converted to \nnn form,
-     * while \ is converted to \\.
-     * Newlines in CR, CR/LF, or LF form will be printed as one newline.
-     */
-    if (ch == '\r') {
-      printf("\n");
-    } else if (ch == '\n') {
-      if (lastch != '\r')
-	printf("\n");
-    } else if (ch == '\\') {
-      printf("\\\\");
-    } else if (isprint(ch)) {
-      putc(ch, stdout);
-    } else {
-      printf("\\%03o", ch);
-    }
-    lastch = ch;
-    length--;
-  }
-  printf("\n");
-}
-
-
-/*
- * Process a SOFn marker.
- * This code is only needed if you want to know the image dimensions...
- */
-
-static void
-process_SOFn (int marker)
-{
-  unsigned int length;
-  unsigned int image_height, image_width;
-  int data_precision, num_components;
-  const char * process;
-  int ci;
-
-  length = read_2_bytes();	/* usual parameter length count */
-
-  data_precision = read_1_byte();
-  image_height = read_2_bytes();
-  image_width = read_2_bytes();
-  num_components = read_1_byte();
-
-  switch (marker) {
-  case M_SOF0:	process = "Baseline";  break;
-  case M_SOF1:	process = "Extended sequential";  break;
-  case M_SOF2:	process = "Progressive";  break;
-  case M_SOF3:	process = "Lossless";  break;
-  case M_SOF5:	process = "Differential sequential";  break;
-  case M_SOF6:	process = "Differential progressive";  break;
-  case M_SOF7:	process = "Differential lossless";  break;
-  case M_SOF9:	process = "Extended sequential, arithmetic coding";  break;
-  case M_SOF10:	process = "Progressive, arithmetic coding";  break;
-  case M_SOF11:	process = "Lossless, arithmetic coding";  break;
-  case M_SOF13:	process = "Differential sequential, arithmetic coding";  break;
-  case M_SOF14:	process = "Differential progressive, arithmetic coding"; break;
-  case M_SOF15:	process = "Differential lossless, arithmetic coding";  break;
-  default:	process = "Unknown";  break;
-  }
-
-  printf("JPEG image is %uw * %uh, %d color components, %d bits per sample\n",
-	 image_width, image_height, num_components, data_precision);
-  printf("JPEG process: %s\n", process);
-
-  if (length != (unsigned int) (8 + num_components * 3))
-    ERREXIT("Bogus SOF marker length");
-
-  for (ci = 0; ci < num_components; ci++) {
-    (void) read_1_byte();	/* Component ID code */
-    (void) read_1_byte();	/* H, V sampling factors */
-    (void) read_1_byte();	/* Quantization table number */
-  }
-}
-
-
-/*
- * Parse the marker stream until SOS or EOI is seen;
- * display any COM markers.
- * While the companion program wrjpgcom will always insert COM markers before
- * SOFn, other implementations might not, so we scan to SOS before stopping.
- * If we were only interested in the image dimensions, we would stop at SOFn.
- * (Conversely, if we only cared about COM markers, there would be no need
- * for special code to handle SOFn; we could treat it like other markers.)
- */
-
-static int
-scan_JPEG_header (int verbose)
-{
-  int marker;
-
-  /* Expect SOI at start of file */
-  if (first_marker() != M_SOI)
-    ERREXIT("Expected SOI marker first");
-
-  /* Scan miscellaneous markers until we reach SOS. */
-  for (;;) {
-    marker = next_marker();
-    switch (marker) {
-      /* Note that marker codes 0xC4, 0xC8, 0xCC are not, and must not be,
-       * treated as SOFn.  C4 in particular is actually DHT.
-       */
-    case M_SOF0:		/* Baseline */
-    case M_SOF1:		/* Extended sequential, Huffman */
-    case M_SOF2:		/* Progressive, Huffman */
-    case M_SOF3:		/* Lossless, Huffman */
-    case M_SOF5:		/* Differential sequential, Huffman */
-    case M_SOF6:		/* Differential progressive, Huffman */
-    case M_SOF7:		/* Differential lossless, Huffman */
-    case M_SOF9:		/* Extended sequential, arithmetic */
-    case M_SOF10:		/* Progressive, arithmetic */
-    case M_SOF11:		/* Lossless, arithmetic */
-    case M_SOF13:		/* Differential sequential, arithmetic */
-    case M_SOF14:		/* Differential progressive, arithmetic */
-    case M_SOF15:		/* Differential lossless, arithmetic */
-      if (verbose)
-	process_SOFn(marker);
-      else
-	skip_variable();
-      break;
-
-    case M_SOS:			/* stop before hitting compressed data */
-      return marker;
-
-    case M_EOI:			/* in case it's a tables-only JPEG stream */
-      return marker;
-
-    case M_COM:
-      process_COM();
-      break;
-
-    case M_APP12:
-      /* Some digital camera makers put useful textual information into
-       * APP12 markers, so we print those out too when in -verbose mode.
-       */
-      if (verbose) {
-	printf("APP12 contains:\n");
-	process_COM();
-      } else
-	skip_variable();
-      break;
-
-    default:			/* Anything else just gets skipped */
-      skip_variable();		/* we assume it has a parameter count... */
-      break;
-    }
-  } /* end loop */
-}
-
-
-/* Command line parsing code */
-
-static const char * progname;	/* program name for error messages */
-
-
-static void
-usage (void)
-/* complain about bad command line */
-{
-  fprintf(stderr, "rdjpgcom displays any textual comments in a JPEG file.\n");
-
-  fprintf(stderr, "Usage: %s [switches] [inputfile]\n", progname);
-
-  fprintf(stderr, "Switches (names may be abbreviated):\n");
-  fprintf(stderr, "  -verbose    Also display dimensions of JPEG image\n");
-
-  exit(EXIT_FAILURE);
-}
-
-
-static int
-keymatch (char * arg, const char * keyword, int minchars)
-/* Case-insensitive matching of (possibly abbreviated) keyword switches. */
-/* keyword is the constant keyword (must be lower case already), */
-/* minchars is length of minimum legal abbreviation. */
-{
-  register int ca, ck;
-  register int nmatched = 0;
-
-  while ((ca = *arg++) != '\0') {
-    if ((ck = *keyword++) == '\0')
-      return 0;			/* arg longer than keyword, no good */
-    if (isupper(ca))		/* force arg to lcase (assume ck is already) */
-      ca = tolower(ca);
-    if (ca != ck)
-      return 0;			/* no good */
-    nmatched++;			/* count matched characters */
-  }
-  /* reached end of argument; fail if it's too short for unique abbrev */
-  if (nmatched < minchars)
-    return 0;
-  return 1;			/* A-OK */
-}
-
-
-/*
- * The main program.
- */
-
-int
-main (int argc, char **argv)
-{
-  int argn;
-  char * arg;
-  int verbose = 0;
-
-  /* On Mac, fetch a command line. */
-#ifdef USE_CCOMMAND
-  argc = ccommand(&argv);
-#endif
-
-  progname = argv[0];
-  if (progname == NULL || progname[0] == 0)
-    progname = "rdjpgcom";	/* in case C library doesn't provide it */
-
-  /* Parse switches, if any */
-  for (argn = 1; argn < argc; argn++) {
-    arg = argv[argn];
-    if (arg[0] != '-')
-      break;			/* not switch, must be file name */
-    arg++;			/* advance over '-' */
-    if (keymatch(arg, "verbose", 1)) {
-      verbose++;
-    } else
-      usage();
-  }
-
-  /* Open the input file. */
-  /* Unix style: expect zero or one file name */
-  if (argn < argc-1) {
-    fprintf(stderr, "%s: only one input file\n", progname);
-    usage();
-  }
-  if (argn < argc) {
-    if ((infile = fopen(argv[argn], READ_BINARY)) == NULL) {
-      fprintf(stderr, "%s: can't open %s\n", progname, argv[argn]);
-      exit(EXIT_FAILURE);
-    }
-  } else {
-    /* default input file is stdin */
-#ifdef USE_SETMODE		/* need to hack file mode? */
-    setmode(fileno(stdin), O_BINARY);
-#endif
-#ifdef USE_FDOPEN		/* need to re-open in binary mode? */
-    if ((infile = fdopen(fileno(stdin), READ_BINARY)) == NULL) {
-      fprintf(stderr, "%s: can't open stdin\n", progname);
-      exit(EXIT_FAILURE);
-    }
-#else
-    infile = stdin;
-#endif
-  }
-
-  /* Scan the JPEG headers. */
-  (void) scan_JPEG_header(verbose);
-
-  /* All done. */
-  exit(EXIT_SUCCESS);
-  return 0;			/* suppress no-return-value warnings */
-}

Engine/lib/ljpeg/extras/rdppm.c

@@ -1,458 +0,0 @@
-/*
- * rdppm.c
- *
- * Copyright (C) 1991-1997, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains routines to read input images in PPM/PGM format.
- * The extended 2-byte-per-sample raw PPM/PGM formats are supported.
- * The PBMPLUS library is NOT required to compile this software
- * (but it is highly useful as a set of PPM image manipulation programs).
- *
- * These routines may need modification for non-Unix environments or
- * specialized applications.  As they stand, they assume input from
- * an ordinary stdio stream.  They further assume that reading begins
- * at the start of the file; start_input may need work if the
- * user interface has already read some data (e.g., to determine that
- * the file is indeed PPM format).
- */
-
-#include "cdjpeg.h"		/* Common decls for cjpeg/djpeg applications */
-
-#ifdef PPM_SUPPORTED
-
-
-/* Portions of this code are based on the PBMPLUS library, which is:
-**
-** Copyright (C) 1988 by Jef Poskanzer.
-**
-** Permission to use, copy, modify, and distribute this software and its
-** documentation for any purpose and without fee is hereby granted, provided
-** that the above copyright notice appear in all copies and that both that
-** copyright notice and this permission notice appear in supporting
-** documentation.  This software is provided "as is" without express or
-** implied warranty.
-*/
-
-
-/* Macros to deal with unsigned chars as efficiently as compiler allows */
-
-#ifdef HAVE_UNSIGNED_CHAR
-typedef unsigned char U_CHAR;
-#define UCH(x)	((int) (x))
-#else /* !HAVE_UNSIGNED_CHAR */
-#ifdef CHAR_IS_UNSIGNED
-typedef char U_CHAR;
-#define UCH(x)	((int) (x))
-#else
-typedef char U_CHAR;
-#define UCH(x)	((int) (x) & 0xFF)
-#endif
-#endif /* HAVE_UNSIGNED_CHAR */
-
-
-#define	ReadOK(file,buffer,len)	(JFREAD(file,buffer,len) == ((size_t) (len)))
-
-
-/*
- * On most systems, reading individual bytes with getc() is drastically less
- * efficient than buffering a row at a time with fread().  On PCs, we must
- * allocate the buffer in near data space, because we are assuming small-data
- * memory model, wherein fread() can't reach far memory.  If you need to
- * process very wide images on a PC, you might have to compile in large-memory
- * model, or else replace fread() with a getc() loop --- which will be much
- * slower.
- */
-
-
-/* Private version of data source object */
-
-typedef struct {
-  struct cjpeg_source_struct pub; /* public fields */
-
-  U_CHAR *iobuffer;		/* non-FAR pointer to I/O buffer */
-  JSAMPROW pixrow;		/* FAR pointer to same */
-  size_t buffer_width;		/* width of I/O buffer */
-  JSAMPLE *rescale;		/* => maxval-remapping array, or NULL */
-} ppm_source_struct;
-
-typedef ppm_source_struct * ppm_source_ptr;
-
-
-LOCAL(int)
-pbm_getc (FILE * infile)
-/* Read next char, skipping over any comments */
-/* A comment/newline sequence is returned as a newline */
-{
-  register int ch;
-
-  ch = getc(infile);
-  if (ch == '#') {
-    do {
-      ch = getc(infile);
-    } while (ch != '\n' && ch != EOF);
-  }
-  return ch;
-}
-
-
-LOCAL(unsigned int)
-read_pbm_integer (j_compress_ptr cinfo, FILE * infile)
-/* Read an unsigned decimal integer from the PPM file */
-/* Swallows one trailing character after the integer */
-/* Note that on a 16-bit-int machine, only values up to 64k can be read. */
-/* This should not be a problem in practice. */
-{
-  register int ch;
-  register unsigned int val;
-
-  /* Skip any leading whitespace */
-  do {
-    ch = pbm_getc(infile);
-    if (ch == EOF)
-      ERREXIT(cinfo, JERR_INPUT_EOF);
-  } while (ch == ' ' || ch == '\t' || ch == '\n' || ch == '\r');
-
-  if (ch < '0' || ch > '9')
-    ERREXIT(cinfo, JERR_PPM_NONNUMERIC);
-
-  val = ch - '0';
-  while ((ch = pbm_getc(infile)) >= '0' && ch <= '9') {
-    val *= 10;
-    val += ch - '0';
-  }
-  return val;
-}
-
-
-/*
- * Read one row of pixels.
- *
- * We provide several different versions depending on input file format.
- * In all cases, input is scaled to the size of JSAMPLE.
- *
- * A really fast path is provided for reading byte/sample raw files with
- * maxval = MAXJSAMPLE, which is the normal case for 8-bit data.
- */
-
-
-METHODDEF(JDIMENSION)
-get_text_gray_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
-/* This version is for reading text-format PGM files with any maxval */
-{
-  ppm_source_ptr source = (ppm_source_ptr) sinfo;
-  FILE * infile = source->pub.input_file;
-  register JSAMPROW ptr;
-  register JSAMPLE *rescale = source->rescale;
-  JDIMENSION col;
-
-  ptr = source->pub.buffer[0];
-  for (col = cinfo->image_width; col > 0; col--) {
-    *ptr++ = rescale[read_pbm_integer(cinfo, infile)];
-  }
-  return 1;
-}
-
-
-METHODDEF(JDIMENSION)
-get_text_rgb_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
-/* This version is for reading text-format PPM files with any maxval */
-{
-  ppm_source_ptr source = (ppm_source_ptr) sinfo;
-  FILE * infile = source->pub.input_file;
-  register JSAMPROW ptr;
-  register JSAMPLE *rescale = source->rescale;
-  JDIMENSION col;
-
-  ptr = source->pub.buffer[0];
-  for (col = cinfo->image_width; col > 0; col--) {
-    *ptr++ = rescale[read_pbm_integer(cinfo, infile)];
-    *ptr++ = rescale[read_pbm_integer(cinfo, infile)];
-    *ptr++ = rescale[read_pbm_integer(cinfo, infile)];
-  }
-  return 1;
-}
-
-
-METHODDEF(JDIMENSION)
-get_scaled_gray_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
-/* This version is for reading raw-byte-format PGM files with any maxval */
-{
-  ppm_source_ptr source = (ppm_source_ptr) sinfo;
-  register JSAMPROW ptr;
-  register U_CHAR * bufferptr;
-  register JSAMPLE *rescale = source->rescale;
-  JDIMENSION col;
-
-  if (! ReadOK(source->pub.input_file, source->iobuffer, source->buffer_width))
-    ERREXIT(cinfo, JERR_INPUT_EOF);
-  ptr = source->pub.buffer[0];
-  bufferptr = source->iobuffer;
-  for (col = cinfo->image_width; col > 0; col--) {
-    *ptr++ = rescale[UCH(*bufferptr++)];
-  }
-  return 1;
-}
-
-
-METHODDEF(JDIMENSION)
-get_scaled_rgb_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
-/* This version is for reading raw-byte-format PPM files with any maxval */
-{
-  ppm_source_ptr source = (ppm_source_ptr) sinfo;
-  register JSAMPROW ptr;
-  register U_CHAR * bufferptr;
-  register JSAMPLE *rescale = source->rescale;
-  JDIMENSION col;
-
-  if (! ReadOK(source->pub.input_file, source->iobuffer, source->buffer_width))
-    ERREXIT(cinfo, JERR_INPUT_EOF);
-  ptr = source->pub.buffer[0];
-  bufferptr = source->iobuffer;
-  for (col = cinfo->image_width; col > 0; col--) {
-    *ptr++ = rescale[UCH(*bufferptr++)];
-    *ptr++ = rescale[UCH(*bufferptr++)];
-    *ptr++ = rescale[UCH(*bufferptr++)];
-  }
-  return 1;
-}
-
-
-METHODDEF(JDIMENSION)
-get_raw_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
-/* This version is for reading raw-byte-format files with maxval = MAXJSAMPLE.
- * In this case we just read right into the JSAMPLE buffer!
- * Note that same code works for PPM and PGM files.
- */
-{
-  ppm_source_ptr source = (ppm_source_ptr) sinfo;
-
-  if (! ReadOK(source->pub.input_file, source->iobuffer, source->buffer_width))
-    ERREXIT(cinfo, JERR_INPUT_EOF);
-  return 1;
-}
-
-
-METHODDEF(JDIMENSION)
-get_word_gray_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
-/* This version is for reading raw-word-format PGM files with any maxval */
-{
-  ppm_source_ptr source = (ppm_source_ptr) sinfo;
-  register JSAMPROW ptr;
-  register U_CHAR * bufferptr;
-  register JSAMPLE *rescale = source->rescale;
-  JDIMENSION col;
-
-  if (! ReadOK(source->pub.input_file, source->iobuffer, source->buffer_width))
-    ERREXIT(cinfo, JERR_INPUT_EOF);
-  ptr = source->pub.buffer[0];
-  bufferptr = source->iobuffer;
-  for (col = cinfo->image_width; col > 0; col--) {
-    register int temp;
-    temp  = UCH(*bufferptr++);
-    temp |= UCH(*bufferptr++) << 8;
-    *ptr++ = rescale[temp];
-  }
-  return 1;
-}
-
-
-METHODDEF(JDIMENSION)
-get_word_rgb_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
-/* This version is for reading raw-word-format PPM files with any maxval */
-{
-  ppm_source_ptr source = (ppm_source_ptr) sinfo;
-  register JSAMPROW ptr;
-  register U_CHAR * bufferptr;
-  register JSAMPLE *rescale = source->rescale;
-  JDIMENSION col;
-
-  if (! ReadOK(source->pub.input_file, source->iobuffer, source->buffer_width))
-    ERREXIT(cinfo, JERR_INPUT_EOF);
-  ptr = source->pub.buffer[0];
-  bufferptr = source->iobuffer;
-  for (col = cinfo->image_width; col > 0; col--) {
-    register int temp;
-    temp  = UCH(*bufferptr++);
-    temp |= UCH(*bufferptr++) << 8;
-    *ptr++ = rescale[temp];
-    temp  = UCH(*bufferptr++);
-    temp |= UCH(*bufferptr++) << 8;
-    *ptr++ = rescale[temp];
-    temp  = UCH(*bufferptr++);
-    temp |= UCH(*bufferptr++) << 8;
-    *ptr++ = rescale[temp];
-  }
-  return 1;
-}
-
-
-/*
- * Read the file header; return image size and component count.
- */
-
-METHODDEF(void)
-start_input_ppm (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
-{
-  ppm_source_ptr source = (ppm_source_ptr) sinfo;
-  int c;
-  unsigned int w, h, maxval;
-  boolean need_iobuffer, use_raw_buffer, need_rescale;
-
-  if (getc(source->pub.input_file) != 'P')
-    ERREXIT(cinfo, JERR_PPM_NOT);
-
-  c = getc(source->pub.input_file); /* subformat discriminator character */
-
-  /* detect unsupported variants (ie, PBM) before trying to read header */
-  switch (c) {
-  case '2':			/* it's a text-format PGM file */
-  case '3':			/* it's a text-format PPM file */
-  case '5':			/* it's a raw-format PGM file */
-  case '6':			/* it's a raw-format PPM file */
-    break;
-  default:
-    ERREXIT(cinfo, JERR_PPM_NOT);
-    break;
-  }
-
-  /* fetch the remaining header info */
-  w = read_pbm_integer(cinfo, source->pub.input_file);
-  h = read_pbm_integer(cinfo, source->pub.input_file);
-  maxval = read_pbm_integer(cinfo, source->pub.input_file);
-
-  if (w <= 0 || h <= 0 || maxval <= 0) /* error check */
-    ERREXIT(cinfo, JERR_PPM_NOT);
-
-  cinfo->data_precision = BITS_IN_JSAMPLE; /* we always rescale data to this */
-  cinfo->image_width = (JDIMENSION) w;
-  cinfo->image_height = (JDIMENSION) h;
-
-  /* initialize flags to most common settings */
-  need_iobuffer = TRUE;		/* do we need an I/O buffer? */
-  use_raw_buffer = FALSE;	/* do we map input buffer onto I/O buffer? */
-  need_rescale = TRUE;		/* do we need a rescale array? */
-
-  switch (c) {
-  case '2':			/* it's a text-format PGM file */
-    cinfo->input_components = 1;
-    cinfo->in_color_space = JCS_GRAYSCALE;
-    TRACEMS2(cinfo, 1, JTRC_PGM_TEXT, w, h);
-    source->pub.get_pixel_rows = get_text_gray_row;
-    need_iobuffer = FALSE;
-    break;
-
-  case '3':			/* it's a text-format PPM file */
-    cinfo->input_components = 3;
-    cinfo->in_color_space = JCS_RGB;
-    TRACEMS2(cinfo, 1, JTRC_PPM_TEXT, w, h);
-    source->pub.get_pixel_rows = get_text_rgb_row;
-    need_iobuffer = FALSE;
-    break;
-
-  case '5':			/* it's a raw-format PGM file */
-    cinfo->input_components = 1;
-    cinfo->in_color_space = JCS_GRAYSCALE;
-    TRACEMS2(cinfo, 1, JTRC_PGM, w, h);
-    if (maxval > 255) {
-      source->pub.get_pixel_rows = get_word_gray_row;
-    } else if (maxval == MAXJSAMPLE && SIZEOF(JSAMPLE) == SIZEOF(U_CHAR)) {
-      source->pub.get_pixel_rows = get_raw_row;
-      use_raw_buffer = TRUE;
-      need_rescale = FALSE;
-    } else {
-      source->pub.get_pixel_rows = get_scaled_gray_row;
-    }
-    break;
-
-  case '6':			/* it's a raw-format PPM file */
-    cinfo->input_components = 3;
-    cinfo->in_color_space = JCS_RGB;
-    TRACEMS2(cinfo, 1, JTRC_PPM, w, h);
-    if (maxval > 255) {
-      source->pub.get_pixel_rows = get_word_rgb_row;
-    } else if (maxval == MAXJSAMPLE && SIZEOF(JSAMPLE) == SIZEOF(U_CHAR)) {
-      source->pub.get_pixel_rows = get_raw_row;
-      use_raw_buffer = TRUE;
-      need_rescale = FALSE;
-    } else {
-      source->pub.get_pixel_rows = get_scaled_rgb_row;
-    }
-    break;
-  }
-
-  /* Allocate space for I/O buffer: 1 or 3 bytes or words/pixel. */
-  if (need_iobuffer) {
-    source->buffer_width = (size_t) w * cinfo->input_components *
-      ((maxval<=255) ? SIZEOF(U_CHAR) : (2*SIZEOF(U_CHAR)));
-    source->iobuffer = (U_CHAR *)
-      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				  source->buffer_width);
-  }
-
-  /* Create compressor input buffer. */
-  if (use_raw_buffer) {
-    /* For unscaled raw-input case, we can just map it onto the I/O buffer. */
-    /* Synthesize a JSAMPARRAY pointer structure */
-    /* Cast here implies near->far pointer conversion on PCs */
-    source->pixrow = (JSAMPROW) source->iobuffer;
-    source->pub.buffer = & source->pixrow;
-    source->pub.buffer_height = 1;
-  } else {
-    /* Need to translate anyway, so make a separate sample buffer. */
-    source->pub.buffer = (*cinfo->mem->alloc_sarray)
-      ((j_common_ptr) cinfo, JPOOL_IMAGE,
-       (JDIMENSION) w * cinfo->input_components, (JDIMENSION) 1);
-    source->pub.buffer_height = 1;
-  }
-
-  /* Compute the rescaling array if required. */
-  if (need_rescale) {
-    INT32 val, half_maxval;
-
-    /* On 16-bit-int machines we have to be careful of maxval = 65535 */
-    source->rescale = (JSAMPLE *)
-      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				  (size_t) (((long) maxval + 1L) * SIZEOF(JSAMPLE)));
-    half_maxval = maxval / 2;
-    for (val = 0; val <= (INT32) maxval; val++) {
-      /* The multiplication here must be done in 32 bits to avoid overflow */
-      source->rescale[val] = (JSAMPLE) ((val*MAXJSAMPLE + half_maxval)/maxval);
-    }
-  }
-}
-
-
-/*
- * Finish up at the end of the file.
- */
-
-METHODDEF(void)
-finish_input_ppm (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
-{
-  /* no work */
-}
-
-
-/*
- * The module selection routine for PPM format input.
- */
-
-GLOBAL(cjpeg_source_ptr)
-jinit_read_ppm (j_compress_ptr cinfo)
-{
-  ppm_source_ptr source;
-
-  /* Create module interface object */
-  source = (ppm_source_ptr)
-      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				  SIZEOF(ppm_source_struct));
-  /* Fill in method ptrs, except get_pixel_rows which start_input sets */
-  source->pub.start_input = start_input_ppm;
-  source->pub.finish_input = finish_input_ppm;
-
-  return (cjpeg_source_ptr) source;
-}
-
-#endif /* PPM_SUPPORTED */

Engine/lib/ljpeg/extras/rdrle.c

@@ -1,387 +0,0 @@
-/*
- * rdrle.c
- *
- * Copyright (C) 1991-1996, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains routines to read input images in Utah RLE format.
- * The Utah Raster Toolkit library is required (version 3.1 or later).
- *
- * These routines may need modification for non-Unix environments or
- * specialized applications.  As they stand, they assume input from
- * an ordinary stdio stream.  They further assume that reading begins
- * at the start of the file; start_input may need work if the
- * user interface has already read some data (e.g., to determine that
- * the file is indeed RLE format).
- *
- * Based on code contributed by Mike Lijewski,
- * with updates from Robert Hutchinson.
- */
-
-#include "cdjpeg.h"		/* Common decls for cjpeg/djpeg applications */
-
-#ifdef RLE_SUPPORTED
-
-/* rle.h is provided by the Utah Raster Toolkit. */
-
-#include <rle.h>
-
-/*
- * We assume that JSAMPLE has the same representation as rle_pixel,
- * to wit, "unsigned char".  Hence we can't cope with 12- or 16-bit samples.
- */
-
-#if BITS_IN_JSAMPLE != 8
-  Sorry, this code only copes with 8-bit JSAMPLEs. /* deliberate syntax err */
-#endif
-
-/*
- * We support the following types of RLE files:
- *   
- *   GRAYSCALE   - 8 bits, no colormap
- *   MAPPEDGRAY  - 8 bits, 1 channel colomap
- *   PSEUDOCOLOR - 8 bits, 3 channel colormap
- *   TRUECOLOR   - 24 bits, 3 channel colormap
- *   DIRECTCOLOR - 24 bits, no colormap
- *
- * For now, we ignore any alpha channel in the image.
- */
-
-typedef enum
-  { GRAYSCALE, MAPPEDGRAY, PSEUDOCOLOR, TRUECOLOR, DIRECTCOLOR } rle_kind;
-
-
-/*
- * Since RLE stores scanlines bottom-to-top, we have to invert the image
- * to conform to JPEG's top-to-bottom order.  To do this, we read the
- * incoming image into a virtual array on the first get_pixel_rows call,
- * then fetch the required row from the virtual array on subsequent calls.
- */
-
-typedef struct _rle_source_struct * rle_source_ptr;
-
-typedef struct _rle_source_struct {
-  struct cjpeg_source_struct pub; /* public fields */
-
-  rle_kind visual;              /* actual type of input file */
-  jvirt_sarray_ptr image;       /* virtual array to hold the image */
-  JDIMENSION row;		/* current row # in the virtual array */
-  rle_hdr header;               /* Input file information */
-  rle_pixel** rle_row;          /* holds a row returned by rle_getrow() */
-
-} rle_source_struct;
-
-
-/*
- * Read the file header; return image size and component count.
- */
-
-METHODDEF(void)
-start_input_rle (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
-{
-  rle_source_ptr source = (rle_source_ptr) sinfo;
-  JDIMENSION width, height;
-#ifdef PROGRESS_REPORT
-  cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress;
-#endif
-
-  /* Use RLE library routine to get the header info */
-  source->header = *rle_hdr_init(NULL);
-  source->header.rle_file = source->pub.input_file;
-  switch (rle_get_setup(&(source->header))) {
-  case RLE_SUCCESS:
-    /* A-OK */
-    break;
-  case RLE_NOT_RLE:
-    ERREXIT(cinfo, JERR_RLE_NOT);
-    break;
-  case RLE_NO_SPACE:
-    ERREXIT(cinfo, JERR_RLE_MEM);
-    break;
-  case RLE_EMPTY:
-    ERREXIT(cinfo, JERR_RLE_EMPTY);
-    break;
-  case RLE_EOF:
-    ERREXIT(cinfo, JERR_RLE_EOF);
-    break;
-  default:
-    ERREXIT(cinfo, JERR_RLE_BADERROR);
-    break;
-  }
-
-  /* Figure out what we have, set private vars and return values accordingly */
-  
-  width  = source->header.xmax - source->header.xmin + 1;
-  height = source->header.ymax - source->header.ymin + 1;
-  source->header.xmin = 0;		/* realign horizontally */
-  source->header.xmax = width-1;
-
-  cinfo->image_width      = width;
-  cinfo->image_height     = height;
-  cinfo->data_precision   = 8;  /* we can only handle 8 bit data */
-
-  if (source->header.ncolors == 1 && source->header.ncmap == 0) {
-    source->visual     = GRAYSCALE;
-    TRACEMS2(cinfo, 1, JTRC_RLE_GRAY, width, height);
-  } else if (source->header.ncolors == 1 && source->header.ncmap == 1) {
-    source->visual     = MAPPEDGRAY;
-    TRACEMS3(cinfo, 1, JTRC_RLE_MAPGRAY, width, height,
-             1 << source->header.cmaplen);
-  } else if (source->header.ncolors == 1 && source->header.ncmap == 3) {
-    source->visual     = PSEUDOCOLOR;
-    TRACEMS3(cinfo, 1, JTRC_RLE_MAPPED, width, height,
-	     1 << source->header.cmaplen);
-  } else if (source->header.ncolors == 3 && source->header.ncmap == 3) {
-    source->visual     = TRUECOLOR;
-    TRACEMS3(cinfo, 1, JTRC_RLE_FULLMAP, width, height,
-	     1 << source->header.cmaplen);
-  } else if (source->header.ncolors == 3 && source->header.ncmap == 0) {
-    source->visual     = DIRECTCOLOR;
-    TRACEMS2(cinfo, 1, JTRC_RLE, width, height);
-  } else
-    ERREXIT(cinfo, JERR_RLE_UNSUPPORTED);
-  
-  if (source->visual == GRAYSCALE || source->visual == MAPPEDGRAY) {
-    cinfo->in_color_space   = JCS_GRAYSCALE;
-    cinfo->input_components = 1;
-  } else {
-    cinfo->in_color_space   = JCS_RGB;
-    cinfo->input_components = 3;
-  }
-
-  /*
-   * A place to hold each scanline while it's converted.
-   * (GRAYSCALE scanlines don't need converting)
-   */
-  if (source->visual != GRAYSCALE) {
-    source->rle_row = (rle_pixel**) (*cinfo->mem->alloc_sarray)
-      ((j_common_ptr) cinfo, JPOOL_IMAGE,
-       (JDIMENSION) width, (JDIMENSION) cinfo->input_components);
-  }
-
-  /* request a virtual array to hold the image */
-  source->image = (*cinfo->mem->request_virt_sarray)
-    ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE,
-     (JDIMENSION) (width * source->header.ncolors),
-     (JDIMENSION) height, (JDIMENSION) 1);
-
-#ifdef PROGRESS_REPORT
-  if (progress != NULL) {
-    /* count file input as separate pass */
-    progress->total_extra_passes++;
-  }
-#endif
-
-  source->pub.buffer_height = 1;
-}
-
-
-/*
- * Read one row of pixels.
- * Called only after load_image has read the image into the virtual array.
- * Used for GRAYSCALE, MAPPEDGRAY, TRUECOLOR, and DIRECTCOLOR images.
- */
-
-METHODDEF(JDIMENSION)
-get_rle_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
-{
-  rle_source_ptr source = (rle_source_ptr) sinfo;
-
-  source->row--;
-  source->pub.buffer = (*cinfo->mem->access_virt_sarray)
-    ((j_common_ptr) cinfo, source->image, source->row, (JDIMENSION) 1, FALSE);
-
-  return 1;
-}
-
-/*
- * Read one row of pixels.
- * Called only after load_image has read the image into the virtual array.
- * Used for PSEUDOCOLOR images.
- */
-
-METHODDEF(JDIMENSION)
-get_pseudocolor_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
-{
-  rle_source_ptr source = (rle_source_ptr) sinfo;
-  JSAMPROW src_row, dest_row;
-  JDIMENSION col;
-  rle_map *colormap;
-  int val;
-
-  colormap = source->header.cmap;
-  dest_row = source->pub.buffer[0];
-  source->row--;
-  src_row = * (*cinfo->mem->access_virt_sarray)
-    ((j_common_ptr) cinfo, source->image, source->row, (JDIMENSION) 1, FALSE);
-
-  for (col = cinfo->image_width; col > 0; col--) {
-    val = GETJSAMPLE(*src_row++);
-    *dest_row++ = (JSAMPLE) (colormap[val      ] >> 8);
-    *dest_row++ = (JSAMPLE) (colormap[val + 256] >> 8);
-    *dest_row++ = (JSAMPLE) (colormap[val + 512] >> 8);
-  }
-
-  return 1;
-}
-
-
-/*
- * Load the image into a virtual array.  We have to do this because RLE
- * files start at the lower left while the JPEG standard has them starting
- * in the upper left.  This is called the first time we want to get a row
- * of input.  What we do is load the RLE data into the array and then call
- * the appropriate routine to read one row from the array.  Before returning,
- * we set source->pub.get_pixel_rows so that subsequent calls go straight to
- * the appropriate row-reading routine.
- */
-
-METHODDEF(JDIMENSION)
-load_image (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
-{
-  rle_source_ptr source = (rle_source_ptr) sinfo;
-  JDIMENSION row, col;
-  JSAMPROW  scanline, red_ptr, green_ptr, blue_ptr;
-  rle_pixel **rle_row;
-  rle_map *colormap;
-  char channel;
-#ifdef PROGRESS_REPORT
-  cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress;
-#endif
-
-  colormap = source->header.cmap;
-  rle_row = source->rle_row;
-
-  /* Read the RLE data into our virtual array.
-   * We assume here that (a) rle_pixel is represented the same as JSAMPLE,
-   * and (b) we are not on a machine where FAR pointers differ from regular.
-   */
-  RLE_CLR_BIT(source->header, RLE_ALPHA); /* don't read the alpha channel */
-
-#ifdef PROGRESS_REPORT
-  if (progress != NULL) {
-    progress->pub.pass_limit = cinfo->image_height;
-    progress->pub.pass_counter = 0;
-    (*progress->pub.progress_monitor) ((j_common_ptr) cinfo);
-  }
-#endif
-
-  switch (source->visual) {
-
-  case GRAYSCALE:
-  case PSEUDOCOLOR:
-    for (row = 0; row < cinfo->image_height; row++) {
-      rle_row = (rle_pixel **) (*cinfo->mem->access_virt_sarray)
-         ((j_common_ptr) cinfo, source->image, row, (JDIMENSION) 1, TRUE);
-      rle_getrow(&source->header, rle_row);
-#ifdef PROGRESS_REPORT
-      if (progress != NULL) {
-        progress->pub.pass_counter++;
-        (*progress->pub.progress_monitor) ((j_common_ptr) cinfo);
-      }
-#endif
-    }
-    break;
-
-  case MAPPEDGRAY:
-  case TRUECOLOR:
-    for (row = 0; row < cinfo->image_height; row++) {
-      scanline = * (*cinfo->mem->access_virt_sarray)
-        ((j_common_ptr) cinfo, source->image, row, (JDIMENSION) 1, TRUE);
-      rle_row = source->rle_row;
-      rle_getrow(&source->header, rle_row);
-
-      for (col = 0; col < cinfo->image_width; col++) {
-        for (channel = 0; channel < source->header.ncolors; channel++) {
-          *scanline++ = (JSAMPLE)
-            (colormap[GETJSAMPLE(rle_row[channel][col]) + 256 * channel] >> 8);
-        }
-      }
-
-#ifdef PROGRESS_REPORT
-      if (progress != NULL) {
-        progress->pub.pass_counter++;
-        (*progress->pub.progress_monitor) ((j_common_ptr) cinfo);
-      }
-#endif
-    }
-    break;
-
-  case DIRECTCOLOR:
-    for (row = 0; row < cinfo->image_height; row++) {
-      scanline = * (*cinfo->mem->access_virt_sarray)
-        ((j_common_ptr) cinfo, source->image, row, (JDIMENSION) 1, TRUE);
-      rle_getrow(&source->header, rle_row);
-
-      red_ptr   = rle_row[0];
-      green_ptr = rle_row[1];
-      blue_ptr  = rle_row[2];
-
-      for (col = cinfo->image_width; col > 0; col--) {
-        *scanline++ = *red_ptr++;
-        *scanline++ = *green_ptr++;
-        *scanline++ = *blue_ptr++;
-      }
-
-#ifdef PROGRESS_REPORT
-      if (progress != NULL) {
-        progress->pub.pass_counter++;
-        (*progress->pub.progress_monitor) ((j_common_ptr) cinfo);
-      }
-#endif
-    }
-  }
-
-#ifdef PROGRESS_REPORT
-  if (progress != NULL)
-    progress->completed_extra_passes++;
-#endif
-
-  /* Set up to call proper row-extraction routine in future */
-  if (source->visual == PSEUDOCOLOR) {
-    source->pub.buffer = source->rle_row;
-    source->pub.get_pixel_rows = get_pseudocolor_row;
-  } else {
-    source->pub.get_pixel_rows = get_rle_row;
-  }
-  source->row = cinfo->image_height;
-
-  /* And fetch the topmost (bottommost) row */
-  return (*source->pub.get_pixel_rows) (cinfo, sinfo);   
-}
-
-
-/*
- * Finish up at the end of the file.
- */
-
-METHODDEF(void)
-finish_input_rle (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
-{
-  /* no work */
-}
-
-
-/*
- * The module selection routine for RLE format input.
- */
-
-GLOBAL(cjpeg_source_ptr)
-jinit_read_rle (j_compress_ptr cinfo)
-{
-  rle_source_ptr source;
-
-  /* Create module interface object */
-  source = (rle_source_ptr)
-      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-                                  SIZEOF(rle_source_struct));
-  /* Fill in method ptrs */
-  source->pub.start_input = start_input_rle;
-  source->pub.finish_input = finish_input_rle;
-  source->pub.get_pixel_rows = load_image;
-
-  return (cjpeg_source_ptr) source;
-}
-
-#endif /* RLE_SUPPORTED */

Engine/lib/ljpeg/extras/rdswitch.c

@@ -1,332 +0,0 @@
-/*
- * rdswitch.c
- *
- * Copyright (C) 1991-1996, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains routines to process some of cjpeg's more complicated
- * command-line switches.  Switches processed here are:
- *	-qtables file		Read quantization tables from text file
- *	-scans file		Read scan script from text file
- *	-qslots N[,N,...]	Set component quantization table selectors
- *	-sample HxV[,HxV,...]	Set component sampling factors
- */
-
-#include "cdjpeg.h"		/* Common decls for cjpeg/djpeg applications */
-#include <ctype.h>		/* to declare isdigit(), isspace() */
-
-
-LOCAL(int)
-text_getc (FILE * file)
-/* Read next char, skipping over any comments (# to end of line) */
-/* A comment/newline sequence is returned as a newline */
-{
-  register int ch;
-  
-  ch = getc(file);
-  if (ch == '#') {
-    do {
-      ch = getc(file);
-    } while (ch != '\n' && ch != EOF);
-  }
-  return ch;
-}
-
-
-LOCAL(boolean)
-read_text_integer (FILE * file, long * result, int * termchar)
-/* Read an unsigned decimal integer from a file, store it in result */
-/* Reads one trailing character after the integer; returns it in termchar */
-{
-  register int ch;
-  register long val;
-  
-  /* Skip any leading whitespace, detect EOF */
-  do {
-    ch = text_getc(file);
-    if (ch == EOF) {
-      *termchar = ch;
-      return FALSE;
-    }
-  } while (isspace(ch));
-  
-  if (! isdigit(ch)) {
-    *termchar = ch;
-    return FALSE;
-  }
-
-  val = ch - '0';
-  while ((ch = text_getc(file)) != EOF) {
-    if (! isdigit(ch))
-      break;
-    val *= 10;
-    val += ch - '0';
-  }
-  *result = val;
-  *termchar = ch;
-  return TRUE;
-}
-
-
-GLOBAL(boolean)
-read_quant_tables (j_compress_ptr cinfo, char * filename,
-		   int scale_factor, boolean force_baseline)
-/* Read a set of quantization tables from the specified file.
- * The file is plain ASCII text: decimal numbers with whitespace between.
- * Comments preceded by '#' may be included in the file.
- * There may be one to NUM_QUANT_TBLS tables in the file, each of 64 values.
- * The tables are implicitly numbered 0,1,etc.
- * NOTE: does not affect the qslots mapping, which will default to selecting
- * table 0 for luminance (or primary) components, 1 for chrominance components.
- * You must use -qslots if you want a different component->table mapping.
- */
-{
-  FILE * fp;
-  int tblno, i, termchar;
-  long val;
-  unsigned int table[DCTSIZE2];
-
-  if ((fp = fopen(filename, "r")) == NULL) {
-    fprintf(stderr, "Can't open table file %s\n", filename);
-    return FALSE;
-  }
-  tblno = 0;
-
-  while (read_text_integer(fp, &val, &termchar)) { /* read 1st element of table */
-    if (tblno >= NUM_QUANT_TBLS) {
-      fprintf(stderr, "Too many tables in file %s\n", filename);
-      fclose(fp);
-      return FALSE;
-    }
-    table[0] = (unsigned int) val;
-    for (i = 1; i < DCTSIZE2; i++) {
-      if (! read_text_integer(fp, &val, &termchar)) {
-	fprintf(stderr, "Invalid table data in file %s\n", filename);
-	fclose(fp);
-	return FALSE;
-      }
-      table[i] = (unsigned int) val;
-    }
-    jpeg_add_quant_table(cinfo, tblno, table, scale_factor, force_baseline);
-    tblno++;
-  }
-
-  if (termchar != EOF) {
-    fprintf(stderr, "Non-numeric data in file %s\n", filename);
-    fclose(fp);
-    return FALSE;
-  }
-
-  fclose(fp);
-  return TRUE;
-}
-
-
-#ifdef C_MULTISCAN_FILES_SUPPORTED
-
-LOCAL(boolean)
-read_scan_integer (FILE * file, long * result, int * termchar)
-/* Variant of read_text_integer that always looks for a non-space termchar;
- * this simplifies parsing of punctuation in scan scripts.
- */
-{
-  register int ch;
-
-  if (! read_text_integer(file, result, termchar))
-    return FALSE;
-  ch = *termchar;
-  while (ch != EOF && isspace(ch))
-    ch = text_getc(file);
-  if (isdigit(ch)) {		/* oops, put it back */
-    if (ungetc(ch, file) == EOF)
-      return FALSE;
-    ch = ' ';
-  } else {
-    /* Any separators other than ';' and ':' are ignored;
-     * this allows user to insert commas, etc, if desired.
-     */
-    if (ch != EOF && ch != ';' && ch != ':')
-      ch = ' ';
-  }
-  *termchar = ch;
-  return TRUE;
-}
-
-
-GLOBAL(boolean)
-read_scan_script (j_compress_ptr cinfo, char * filename)
-/* Read a scan script from the specified text file.
- * Each entry in the file defines one scan to be emitted.
- * Entries are separated by semicolons ';'.
- * An entry contains one to four component indexes,
- * optionally followed by a colon ':' and four progressive-JPEG parameters.
- * The component indexes denote which component(s) are to be transmitted
- * in the current scan.  The first component has index 0.
- * Sequential JPEG is used if the progressive-JPEG parameters are omitted.
- * The file is free format text: any whitespace may appear between numbers
- * and the ':' and ';' punctuation marks.  Also, other punctuation (such
- * as commas or dashes) can be placed between numbers if desired.
- * Comments preceded by '#' may be included in the file.
- * Note: we do very little validity checking here;
- * jcmaster.c will validate the script parameters.
- */
-{
-  FILE * fp;
-  int scanno, ncomps, termchar;
-  long val;
-  jpeg_scan_info * scanptr;
-#define MAX_SCANS  100		/* quite arbitrary limit */
-  jpeg_scan_info scans[MAX_SCANS];
-
-  if ((fp = fopen(filename, "r")) == NULL) {
-    fprintf(stderr, "Can't open scan definition file %s\n", filename);
-    return FALSE;
-  }
-  scanptr = scans;
-  scanno = 0;
-
-  while (read_scan_integer(fp, &val, &termchar)) {
-    if (scanno >= MAX_SCANS) {
-      fprintf(stderr, "Too many scans defined in file %s\n", filename);
-      fclose(fp);
-      return FALSE;
-    }
-    scanptr->component_index[0] = (int) val;
-    ncomps = 1;
-    while (termchar == ' ') {
-      if (ncomps >= MAX_COMPS_IN_SCAN) {
-	fprintf(stderr, "Too many components in one scan in file %s\n",
-		filename);
-	fclose(fp);
-	return FALSE;
-      }
-      if (! read_scan_integer(fp, &val, &termchar))
-	goto bogus;
-      scanptr->component_index[ncomps] = (int) val;
-      ncomps++;
-    }
-    scanptr->comps_in_scan = ncomps;
-    if (termchar == ':') {
-      if (! read_scan_integer(fp, &val, &termchar) || termchar != ' ')
-	goto bogus;
-      scanptr->Ss = (int) val;
-      if (! read_scan_integer(fp, &val, &termchar) || termchar != ' ')
-	goto bogus;
-      scanptr->Se = (int) val;
-      if (! read_scan_integer(fp, &val, &termchar) || termchar != ' ')
-	goto bogus;
-      scanptr->Ah = (int) val;
-      if (! read_scan_integer(fp, &val, &termchar))
-	goto bogus;
-      scanptr->Al = (int) val;
-    } else {
-      /* set non-progressive parameters */
-      scanptr->Ss = 0;
-      scanptr->Se = DCTSIZE2-1;
-      scanptr->Ah = 0;
-      scanptr->Al = 0;
-    }
-    if (termchar != ';' && termchar != EOF) {
-bogus:
-      fprintf(stderr, "Invalid scan entry format in file %s\n", filename);
-      fclose(fp);
-      return FALSE;
-    }
-    scanptr++, scanno++;
-  }
-
-  if (termchar != EOF) {
-    fprintf(stderr, "Non-numeric data in file %s\n", filename);
-    fclose(fp);
-    return FALSE;
-  }
-
-  if (scanno > 0) {
-    /* Stash completed scan list in cinfo structure.
-     * NOTE: for cjpeg's use, JPOOL_IMAGE is the right lifetime for this data,
-     * but if you want to compress multiple images you'd want JPOOL_PERMANENT.
-     */
-    scanptr = (jpeg_scan_info *)
-      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				  scanno * SIZEOF(jpeg_scan_info));
-    MEMCOPY(scanptr, scans, scanno * SIZEOF(jpeg_scan_info));
-    cinfo->scan_info = scanptr;
-    cinfo->num_scans = scanno;
-  }
-
-  fclose(fp);
-  return TRUE;
-}
-
-#endif /* C_MULTISCAN_FILES_SUPPORTED */
-
-
-GLOBAL(boolean)
-set_quant_slots (j_compress_ptr cinfo, char *arg)
-/* Process a quantization-table-selectors parameter string, of the form
- *     N[,N,...]
- * If there are more components than parameters, the last value is replicated.
- */
-{
-  int val = 0;			/* default table # */
-  int ci;
-  char ch;
-
-  for (ci = 0; ci < MAX_COMPONENTS; ci++) {
-    if (*arg) {
-      ch = ',';			/* if not set by sscanf, will be ',' */
-      if (sscanf(arg, "%d%c", &val, &ch) < 1)
-	return FALSE;
-      if (ch != ',')		/* syntax check */
-	return FALSE;
-      if (val < 0 || val >= NUM_QUANT_TBLS) {
-	fprintf(stderr, "JPEG quantization tables are numbered 0..%d\n",
-		NUM_QUANT_TBLS-1);
-	return FALSE;
-      }
-      cinfo->comp_info[ci].quant_tbl_no = val;
-      while (*arg && *arg++ != ',') /* advance to next segment of arg string */
-	;
-    } else {
-      /* reached end of parameter, set remaining components to last table */
-      cinfo->comp_info[ci].quant_tbl_no = val;
-    }
-  }
-  return TRUE;
-}
-
-
-GLOBAL(boolean)
-set_sample_factors (j_compress_ptr cinfo, char *arg)
-/* Process a sample-factors parameter string, of the form
- *     HxV[,HxV,...]
- * If there are more components than parameters, "1x1" is assumed for the rest.
- */
-{
-  int ci, val1, val2;
-  char ch1, ch2;
-
-  for (ci = 0; ci < MAX_COMPONENTS; ci++) {
-    if (*arg) {
-      ch2 = ',';		/* if not set by sscanf, will be ',' */
-      if (sscanf(arg, "%d%c%d%c", &val1, &ch1, &val2, &ch2) < 3)
-	return FALSE;
-      if ((ch1 != 'x' && ch1 != 'X') || ch2 != ',') /* syntax check */
-	return FALSE;
-      if (val1 <= 0 || val1 > 4 || val2 <= 0 || val2 > 4) {
-	fprintf(stderr, "JPEG sampling factors must be 1..4\n");
-	return FALSE;
-      }
-      cinfo->comp_info[ci].h_samp_factor = val1;
-      cinfo->comp_info[ci].v_samp_factor = val2;
-      while (*arg && *arg++ != ',') /* advance to next segment of arg string */
-	;
-    } else {
-      /* reached end of parameter, set remaining components to 1x1 sampling */
-      cinfo->comp_info[ci].h_samp_factor = 1;
-      cinfo->comp_info[ci].v_samp_factor = 1;
-    }
-  }
-  return TRUE;
-}

Engine/lib/ljpeg/extras/rdtarga.c

@@ -1,500 +0,0 @@
-/*
- * rdtarga.c
- *
- * Copyright (C) 1991-1996, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains routines to read input images in Targa format.
- *
- * These routines may need modification for non-Unix environments or
- * specialized applications.  As they stand, they assume input from
- * an ordinary stdio stream.  They further assume that reading begins
- * at the start of the file; start_input may need work if the
- * user interface has already read some data (e.g., to determine that
- * the file is indeed Targa format).
- *
- * Based on code contributed by Lee Daniel Crocker.
- */
-
-#include "cdjpeg.h"		/* Common decls for cjpeg/djpeg applications */
-
-#ifdef TARGA_SUPPORTED
-
-
-/* Macros to deal with unsigned chars as efficiently as compiler allows */
-
-#ifdef HAVE_UNSIGNED_CHAR
-typedef unsigned char U_CHAR;
-#define UCH(x)	((int) (x))
-#else /* !HAVE_UNSIGNED_CHAR */
-#ifdef CHAR_IS_UNSIGNED
-typedef char U_CHAR;
-#define UCH(x)	((int) (x))
-#else
-typedef char U_CHAR;
-#define UCH(x)	((int) (x) & 0xFF)
-#endif
-#endif /* HAVE_UNSIGNED_CHAR */
-
-
-#define	ReadOK(file,buffer,len)	(JFREAD(file,buffer,len) == ((size_t) (len)))
-
-
-/* Private version of data source object */
-
-typedef struct _tga_source_struct * tga_source_ptr;
-
-typedef struct _tga_source_struct {
-  struct cjpeg_source_struct pub; /* public fields */
-
-  j_compress_ptr cinfo;		/* back link saves passing separate parm */
-
-  JSAMPARRAY colormap;		/* Targa colormap (converted to my format) */
-
-  jvirt_sarray_ptr whole_image;	/* Needed if funny input row order */
-  JDIMENSION current_row;	/* Current logical row number to read */
-
-  /* Pointer to routine to extract next Targa pixel from input file */
-  JMETHOD(void, read_pixel, (tga_source_ptr sinfo));
-
-  /* Result of read_pixel is delivered here: */
-  U_CHAR tga_pixel[4];
-
-  int pixel_size;		/* Bytes per Targa pixel (1 to 4) */
-
-  /* State info for reading RLE-coded pixels; both counts must be init to 0 */
-  int block_count;		/* # of pixels remaining in RLE block */
-  int dup_pixel_count;		/* # of times to duplicate previous pixel */
-
-  /* This saves the correct pixel-row-expansion method for preload_image */
-  JMETHOD(JDIMENSION, get_pixel_rows, (j_compress_ptr cinfo,
-				       cjpeg_source_ptr sinfo));
-} tga_source_struct;
-
-
-/* For expanding 5-bit pixel values to 8-bit with best rounding */
-
-static const UINT8 c5to8bits[32] = {
-    0,   8,  16,  25,  33,  41,  49,  58,
-   66,  74,  82,  90,  99, 107, 115, 123,
-  132, 140, 148, 156, 165, 173, 181, 189,
-  197, 206, 214, 222, 230, 239, 247, 255
-};
-
-
-
-LOCAL(int)
-read_byte (tga_source_ptr sinfo)
-/* Read next byte from Targa file */
-{
-  register FILE *infile = sinfo->pub.input_file;
-  register int c;
-
-  if ((c = getc(infile)) == EOF)
-    ERREXIT(sinfo->cinfo, JERR_INPUT_EOF);
-  return c;
-}
-
-
-LOCAL(void)
-read_colormap (tga_source_ptr sinfo, int cmaplen, int mapentrysize)
-/* Read the colormap from a Targa file */
-{
-  int i;
-
-  /* Presently only handles 24-bit BGR format */
-  if (mapentrysize != 24)
-    ERREXIT(sinfo->cinfo, JERR_TGA_BADCMAP);
-
-  for (i = 0; i < cmaplen; i++) {
-    sinfo->colormap[2][i] = (JSAMPLE) read_byte(sinfo);
-    sinfo->colormap[1][i] = (JSAMPLE) read_byte(sinfo);
-    sinfo->colormap[0][i] = (JSAMPLE) read_byte(sinfo);
-  }
-}
-
-
-/*
- * read_pixel methods: get a single pixel from Targa file into tga_pixel[]
- */
-
-METHODDEF(void)
-read_non_rle_pixel (tga_source_ptr sinfo)
-/* Read one Targa pixel from the input file; no RLE expansion */
-{
-  register FILE *infile = sinfo->pub.input_file;
-  register int i;
-
-  for (i = 0; i < sinfo->pixel_size; i++) {
-    sinfo->tga_pixel[i] = (U_CHAR) getc(infile);
-  }
-}
-
-
-METHODDEF(void)
-read_rle_pixel (tga_source_ptr sinfo)
-/* Read one Targa pixel from the input file, expanding RLE data as needed */
-{
-  register FILE *infile = sinfo->pub.input_file;
-  register int i;
-
-  /* Duplicate previously read pixel? */
-  if (sinfo->dup_pixel_count > 0) {
-    sinfo->dup_pixel_count--;
-    return;
-  }
-
-  /* Time to read RLE block header? */
-  if (--sinfo->block_count < 0) { /* decrement pixels remaining in block */
-    i = read_byte(sinfo);
-    if (i & 0x80) {		/* Start of duplicate-pixel block? */
-      sinfo->dup_pixel_count = i & 0x7F; /* number of dups after this one */
-      sinfo->block_count = 0;	/* then read new block header */
-    } else {
-      sinfo->block_count = i & 0x7F; /* number of pixels after this one */
-    }
-  }
-
-  /* Read next pixel */
-  for (i = 0; i < sinfo->pixel_size; i++) {
-    sinfo->tga_pixel[i] = (U_CHAR) getc(infile);
-  }
-}
-
-
-/*
- * Read one row of pixels.
- *
- * We provide several different versions depending on input file format.
- */
-
-
-METHODDEF(JDIMENSION)
-get_8bit_gray_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
-/* This version is for reading 8-bit grayscale pixels */
-{
-  tga_source_ptr source = (tga_source_ptr) sinfo;
-  register JSAMPROW ptr;
-  register JDIMENSION col;
-  
-  ptr = source->pub.buffer[0];
-  for (col = cinfo->image_width; col > 0; col--) {
-    (*source->read_pixel) (source); /* Load next pixel into tga_pixel */
-    *ptr++ = (JSAMPLE) UCH(source->tga_pixel[0]);
-  }
-  return 1;
-}
-
-METHODDEF(JDIMENSION)
-get_8bit_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
-/* This version is for reading 8-bit colormap indexes */
-{
-  tga_source_ptr source = (tga_source_ptr) sinfo;
-  register int t;
-  register JSAMPROW ptr;
-  register JDIMENSION col;
-  register JSAMPARRAY colormap = source->colormap;
-
-  ptr = source->pub.buffer[0];
-  for (col = cinfo->image_width; col > 0; col--) {
-    (*source->read_pixel) (source); /* Load next pixel into tga_pixel */
-    t = UCH(source->tga_pixel[0]);
-    *ptr++ = colormap[0][t];
-    *ptr++ = colormap[1][t];
-    *ptr++ = colormap[2][t];
-  }
-  return 1;
-}
-
-METHODDEF(JDIMENSION)
-get_16bit_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
-/* This version is for reading 16-bit pixels */
-{
-  tga_source_ptr source = (tga_source_ptr) sinfo;
-  register int t;
-  register JSAMPROW ptr;
-  register JDIMENSION col;
-  
-  ptr = source->pub.buffer[0];
-  for (col = cinfo->image_width; col > 0; col--) {
-    (*source->read_pixel) (source); /* Load next pixel into tga_pixel */
-    t = UCH(source->tga_pixel[0]);
-    t += UCH(source->tga_pixel[1]) << 8;
-    /* We expand 5 bit data to 8 bit sample width.
-     * The format of the 16-bit (LSB first) input word is
-     *     xRRRRRGGGGGBBBBB
-     */
-    ptr[2] = (JSAMPLE) c5to8bits[t & 0x1F];
-    t >>= 5;
-    ptr[1] = (JSAMPLE) c5to8bits[t & 0x1F];
-    t >>= 5;
-    ptr[0] = (JSAMPLE) c5to8bits[t & 0x1F];
-    ptr += 3;
-  }
-  return 1;
-}
-
-METHODDEF(JDIMENSION)
-get_24bit_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
-/* This version is for reading 24-bit pixels */
-{
-  tga_source_ptr source = (tga_source_ptr) sinfo;
-  register JSAMPROW ptr;
-  register JDIMENSION col;
-  
-  ptr = source->pub.buffer[0];
-  for (col = cinfo->image_width; col > 0; col--) {
-    (*source->read_pixel) (source); /* Load next pixel into tga_pixel */
-    *ptr++ = (JSAMPLE) UCH(source->tga_pixel[2]); /* change BGR to RGB order */
-    *ptr++ = (JSAMPLE) UCH(source->tga_pixel[1]);
-    *ptr++ = (JSAMPLE) UCH(source->tga_pixel[0]);
-  }
-  return 1;
-}
-
-/*
- * Targa also defines a 32-bit pixel format with order B,G,R,A.
- * We presently ignore the attribute byte, so the code for reading
- * these pixels is identical to the 24-bit routine above.
- * This works because the actual pixel length is only known to read_pixel.
- */
-
-#define get_32bit_row  get_24bit_row
-
-
-/*
- * This method is for re-reading the input data in standard top-down
- * row order.  The entire image has already been read into whole_image
- * with proper conversion of pixel format, but it's in a funny row order.
- */
-
-METHODDEF(JDIMENSION)
-get_memory_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
-{
-  tga_source_ptr source = (tga_source_ptr) sinfo;
-  JDIMENSION source_row;
-
-  /* Compute row of source that maps to current_row of normal order */
-  /* For now, assume image is bottom-up and not interlaced. */
-  /* NEEDS WORK to support interlaced images! */
-  source_row = cinfo->image_height - source->current_row - 1;
-
-  /* Fetch that row from virtual array */
-  source->pub.buffer = (*cinfo->mem->access_virt_sarray)
-    ((j_common_ptr) cinfo, source->whole_image,
-     source_row, (JDIMENSION) 1, FALSE);
-
-  source->current_row++;
-  return 1;
-}
-
-
-/*
- * This method loads the image into whole_image during the first call on
- * get_pixel_rows.  The get_pixel_rows pointer is then adjusted to call
- * get_memory_row on subsequent calls.
- */
-
-METHODDEF(JDIMENSION)
-preload_image (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
-{
-  tga_source_ptr source = (tga_source_ptr) sinfo;
-  JDIMENSION row;
-  cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress;
-
-  /* Read the data into a virtual array in input-file row order. */
-  for (row = 0; row < cinfo->image_height; row++) {
-    if (progress != NULL) {
-      progress->pub.pass_counter = (long) row;
-      progress->pub.pass_limit = (long) cinfo->image_height;
-      (*progress->pub.progress_monitor) ((j_common_ptr) cinfo);
-    }
-    source->pub.buffer = (*cinfo->mem->access_virt_sarray)
-      ((j_common_ptr) cinfo, source->whole_image, row, (JDIMENSION) 1, TRUE);
-    (*source->get_pixel_rows) (cinfo, sinfo);
-  }
-  if (progress != NULL)
-    progress->completed_extra_passes++;
-
-  /* Set up to read from the virtual array in unscrambled order */
-  source->pub.get_pixel_rows = get_memory_row;
-  source->current_row = 0;
-  /* And read the first row */
-  return get_memory_row(cinfo, sinfo);
-}
-
-
-/*
- * Read the file header; return image size and component count.
- */
-
-METHODDEF(void)
-start_input_tga (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
-{
-  tga_source_ptr source = (tga_source_ptr) sinfo;
-  U_CHAR targaheader[18];
-  int idlen, cmaptype, subtype, flags, interlace_type, components;
-  unsigned int width, height, maplen;
-  boolean is_bottom_up;
-
-#define GET_2B(offset)	((unsigned int) UCH(targaheader[offset]) + \
-			 (((unsigned int) UCH(targaheader[offset+1])) << 8))
-
-  if (! ReadOK(source->pub.input_file, targaheader, 18))
-    ERREXIT(cinfo, JERR_INPUT_EOF);
-
-  /* Pretend "15-bit" pixels are 16-bit --- we ignore attribute bit anyway */
-  if (targaheader[16] == 15)
-    targaheader[16] = 16;
-
-  idlen = UCH(targaheader[0]);
-  cmaptype = UCH(targaheader[1]);
-  subtype = UCH(targaheader[2]);
-  maplen = GET_2B(5);
-  width = GET_2B(12);
-  height = GET_2B(14);
-  source->pixel_size = UCH(targaheader[16]) >> 3;
-  flags = UCH(targaheader[17]);	/* Image Descriptor byte */
-
-  is_bottom_up = ((flags & 0x20) == 0);	/* bit 5 set => top-down */
-  interlace_type = flags >> 6;	/* bits 6/7 are interlace code */
-
-  if (cmaptype > 1 ||		/* cmaptype must be 0 or 1 */
-      source->pixel_size < 1 || source->pixel_size > 4 ||
-      (UCH(targaheader[16]) & 7) != 0 || /* bits/pixel must be multiple of 8 */
-      interlace_type != 0)	/* currently don't allow interlaced image */
-    ERREXIT(cinfo, JERR_TGA_BADPARMS);
-  
-  if (subtype > 8) {
-    /* It's an RLE-coded file */
-    source->read_pixel = read_rle_pixel;
-    source->block_count = source->dup_pixel_count = 0;
-    subtype -= 8;
-  } else {
-    /* Non-RLE file */
-    source->read_pixel = read_non_rle_pixel;
-  }
-
-  /* Now should have subtype 1, 2, or 3 */
-  components = 3;		/* until proven different */
-  cinfo->in_color_space = JCS_RGB;
-
-  switch (subtype) {
-  case 1:			/* Colormapped image */
-    if (source->pixel_size == 1 && cmaptype == 1)
-      source->get_pixel_rows = get_8bit_row;
-    else
-      ERREXIT(cinfo, JERR_TGA_BADPARMS);
-    TRACEMS2(cinfo, 1, JTRC_TGA_MAPPED, width, height);
-    break;
-  case 2:			/* RGB image */
-    switch (source->pixel_size) {
-    case 2:
-      source->get_pixel_rows = get_16bit_row;
-      break;
-    case 3:
-      source->get_pixel_rows = get_24bit_row;
-      break;
-    case 4:
-      source->get_pixel_rows = get_32bit_row;
-      break;
-    default:
-      ERREXIT(cinfo, JERR_TGA_BADPARMS);
-      break;
-    }
-    TRACEMS2(cinfo, 1, JTRC_TGA, width, height);
-    break;
-  case 3:			/* Grayscale image */
-    components = 1;
-    cinfo->in_color_space = JCS_GRAYSCALE;
-    if (source->pixel_size == 1)
-      source->get_pixel_rows = get_8bit_gray_row;
-    else
-      ERREXIT(cinfo, JERR_TGA_BADPARMS);
-    TRACEMS2(cinfo, 1, JTRC_TGA_GRAY, width, height);
-    break;
-  default:
-    ERREXIT(cinfo, JERR_TGA_BADPARMS);
-    break;
-  }
-
-  if (is_bottom_up) {
-    /* Create a virtual array to buffer the upside-down image. */
-    source->whole_image = (*cinfo->mem->request_virt_sarray)
-      ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE,
-       (JDIMENSION) width * components, (JDIMENSION) height, (JDIMENSION) 1);
-    if (cinfo->progress != NULL) {
-      cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress;
-      progress->total_extra_passes++; /* count file input as separate pass */
-    }
-    /* source->pub.buffer will point to the virtual array. */
-    source->pub.buffer_height = 1; /* in case anyone looks at it */
-    source->pub.get_pixel_rows = preload_image;
-  } else {
-    /* Don't need a virtual array, but do need a one-row input buffer. */
-    source->whole_image = NULL;
-    source->pub.buffer = (*cinfo->mem->alloc_sarray)
-      ((j_common_ptr) cinfo, JPOOL_IMAGE,
-       (JDIMENSION) width * components, (JDIMENSION) 1);
-    source->pub.buffer_height = 1;
-    source->pub.get_pixel_rows = source->get_pixel_rows;
-  }
-  
-  while (idlen--)		/* Throw away ID field */
-    (void) read_byte(source);
-
-  if (maplen > 0) {
-    if (maplen > 256 || GET_2B(3) != 0)
-      ERREXIT(cinfo, JERR_TGA_BADCMAP);
-    /* Allocate space to store the colormap */
-    source->colormap = (*cinfo->mem->alloc_sarray)
-      ((j_common_ptr) cinfo, JPOOL_IMAGE, (JDIMENSION) maplen, (JDIMENSION) 3);
-    /* and read it from the file */
-    read_colormap(source, (int) maplen, UCH(targaheader[7]));
-  } else {
-    if (cmaptype)		/* but you promised a cmap! */
-      ERREXIT(cinfo, JERR_TGA_BADPARMS);
-    source->colormap = NULL;
-  }
-
-  cinfo->input_components = components;
-  cinfo->data_precision = 8;
-  cinfo->image_width = width;
-  cinfo->image_height = height;
-}
-
-
-/*
- * Finish up at the end of the file.
- */
-
-METHODDEF(void)
-finish_input_tga (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
-{
-  /* no work */
-}
-
-
-/*
- * The module selection routine for Targa format input.
- */
-
-GLOBAL(cjpeg_source_ptr)
-jinit_read_targa (j_compress_ptr cinfo)
-{
-  tga_source_ptr source;
-
-  /* Create module interface object */
-  source = (tga_source_ptr)
-      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				  SIZEOF(tga_source_struct));
-  source->cinfo = cinfo;	/* make back link for subroutines */
-  /* Fill in method ptrs, except get_pixel_rows which start_input sets */
-  source->pub.start_input = start_input_tga;
-  source->pub.finish_input = finish_input_tga;
-
-  return (cjpeg_source_ptr) source;
-}
-
-#endif /* TARGA_SUPPORTED */

Engine/lib/ljpeg/extras/structure.doc

@@ -1,948 +0,0 @@
-IJG JPEG LIBRARY:  SYSTEM ARCHITECTURE
-
-Copyright (C) 1991-1995, Thomas G. Lane.
-This file is part of the Independent JPEG Group's software.
-For conditions of distribution and use, see the accompanying README file.
-
-
-This file provides an overview of the architecture of the IJG JPEG software;
-that is, the functions of the various modules in the system and the interfaces
-between modules.  For more precise details about any data structure or calling
-convention, see the include files and comments in the source code.
-
-We assume that the reader is already somewhat familiar with the JPEG standard.
-The README file includes references for learning about JPEG.  The file
-libjpeg.doc describes the library from the viewpoint of an application
-programmer using the library; it's best to read that file before this one.
-Also, the file coderules.doc describes the coding style conventions we use.
-
-In this document, JPEG-specific terminology follows the JPEG standard:
-  A "component" means a color channel, e.g., Red or Luminance.
-  A "sample" is a single component value (i.e., one number in the image data).
-  A "coefficient" is a frequency coefficient (a DCT transform output number).
-  A "block" is an 8x8 group of samples or coefficients.
-  An "MCU" (minimum coded unit) is an interleaved set of blocks of size
-	determined by the sampling factors, or a single block in a
-	noninterleaved scan.
-We do not use the terms "pixel" and "sample" interchangeably.  When we say
-pixel, we mean an element of the full-size image, while a sample is an element
-of the downsampled image.  Thus the number of samples may vary across
-components while the number of pixels does not.  (This terminology is not used
-rigorously throughout the code, but it is used in places where confusion would
-otherwise result.)
-
-
-*** System features ***
-
-The IJG distribution contains two parts:
-  * A subroutine library for JPEG compression and decompression.
-  * cjpeg/djpeg, two sample applications that use the library to transform
-    JFIF JPEG files to and from several other image formats.
-cjpeg/djpeg are of no great intellectual complexity: they merely add a simple
-command-line user interface and I/O routines for several uncompressed image
-formats.  This document concentrates on the library itself.
-
-We desire the library to be capable of supporting all JPEG baseline, extended
-sequential, and progressive DCT processes.  Hierarchical processes are not
-supported.
-
-The library does not support the lossless (spatial) JPEG process.  Lossless
-JPEG shares little or no code with lossy JPEG, and would normally be used
-without the extensive pre- and post-processing provided by this library.
-We feel that lossless JPEG is better handled by a separate library.
-
-Within these limits, any set of compression parameters allowed by the JPEG
-spec should be readable for decompression.  (We can be more restrictive about
-what formats we can generate.)  Although the system design allows for all
-parameter values, some uncommon settings are not yet implemented and may
-never be; nonintegral sampling ratios are the prime example.  Furthermore,
-we treat 8-bit vs. 12-bit data precision as a compile-time switch, not a
-run-time option, because most machines can store 8-bit pixels much more
-compactly than 12-bit.
-
-For legal reasons, JPEG arithmetic coding is not currently supported, but
-extending the library to include it would be straightforward.
-
-By itself, the library handles only interchange JPEG datastreams --- in
-particular the widely used JFIF file format.  The library can be used by
-surrounding code to process interchange or abbreviated JPEG datastreams that
-are embedded in more complex file formats.  (For example, libtiff uses this
-library to implement JPEG compression within the TIFF file format.)
-
-The library includes a substantial amount of code that is not covered by the
-JPEG standard but is necessary for typical applications of JPEG.  These
-functions preprocess the image before JPEG compression or postprocess it after
-decompression.  They include colorspace conversion, downsampling/upsampling,
-and color quantization.  This code can be omitted if not needed.
-
-A wide range of quality vs. speed tradeoffs are possible in JPEG processing,
-and even more so in decompression postprocessing.  The decompression library
-provides multiple implementations that cover most of the useful tradeoffs,
-ranging from very-high-quality down to fast-preview operation.  On the
-compression side we have generally not provided low-quality choices, since
-compression is normally less time-critical.  It should be understood that the
-low-quality modes may not meet the JPEG standard's accuracy requirements;
-nonetheless, they are useful for viewers.
-
-
-*** Portability issues ***
-
-Portability is an essential requirement for the library.  The key portability
-issues that show up at the level of system architecture are:
-
-1.  Memory usage.  We want the code to be able to run on PC-class machines
-with limited memory.  Images should therefore be processed sequentially (in
-strips), to avoid holding the whole image in memory at once.  Where a
-full-image buffer is necessary, we should be able to use either virtual memory
-or temporary files.
-
-2.  Near/far pointer distinction.  To run efficiently on 80x86 machines, the
-code should distinguish "small" objects (kept in near data space) from
-"large" ones (kept in far data space).  This is an annoying restriction, but
-fortunately it does not impact code quality for less brain-damaged machines,
-and the source code clutter turns out to be minimal with sufficient use of
-pointer typedefs.
-
-3. Data precision.  We assume that "char" is at least 8 bits, "short" and
-"int" at least 16, "long" at least 32.  The code will work fine with larger
-data sizes, although memory may be used inefficiently in some cases.  However,
-the JPEG compressed datastream must ultimately appear on external storage as a
-sequence of 8-bit bytes if it is to conform to the standard.  This may pose a
-problem on machines where char is wider than 8 bits.  The library represents
-compressed data as an array of values of typedef JOCTET.  If no data type
-exactly 8 bits wide is available, custom data source and data destination
-modules must be written to unpack and pack the chosen JOCTET datatype into
-8-bit external representation.
-
-
-*** System overview ***
-
-The compressor and decompressor are each divided into two main sections:
-the JPEG compressor or decompressor proper, and the preprocessing or
-postprocessing functions.  The interface between these two sections is the
-image data that the official JPEG spec regards as its input or output: this
-data is in the colorspace to be used for compression, and it is downsampled
-to the sampling factors to be used.  The preprocessing and postprocessing
-steps are responsible for converting a normal image representation to or from
-this form.  (Those few applications that want to deal with YCbCr downsampled
-data can skip the preprocessing or postprocessing step.)
-
-Looking more closely, the compressor library contains the following main
-elements:
-
-  Preprocessing:
-    * Color space conversion (e.g., RGB to YCbCr).
-    * Edge expansion and downsampling.  Optionally, this step can do simple
-      smoothing --- this is often helpful for low-quality source data.
-  JPEG proper:
-    * MCU assembly, DCT, quantization.
-    * Entropy coding (sequential or progressive, Huffman or arithmetic).
-
-In addition to these modules we need overall control, marker generation,
-and support code (memory management & error handling).  There is also a
-module responsible for physically writing the output data --- typically
-this is just an interface to fwrite(), but some applications may need to
-do something else with the data.
-
-The decompressor library contains the following main elements:
-
-  JPEG proper:
-    * Entropy decoding (sequential or progressive, Huffman or arithmetic).
-    * Dequantization, inverse DCT, MCU disassembly.
-  Postprocessing:
-    * Upsampling.  Optionally, this step may be able to do more general
-      rescaling of the image.
-    * Color space conversion (e.g., YCbCr to RGB).  This step may also
-      provide gamma adjustment [ currently it does not ].
-    * Optional color quantization (e.g., reduction to 256 colors).
-    * Optional color precision reduction (e.g., 24-bit to 15-bit color).
-      [This feature is not currently implemented.]
-
-We also need overall control, marker parsing, and a data source module.
-The support code (memory management & error handling) can be shared with
-the compression half of the library.
-
-There may be several implementations of each of these elements, particularly
-in the decompressor, where a wide range of speed/quality tradeoffs is very
-useful.  It must be understood that some of the best speedups involve
-merging adjacent steps in the pipeline.  For example, upsampling, color space
-conversion, and color quantization might all be done at once when using a
-low-quality ordered-dither technique.  The system architecture is designed to
-allow such merging where appropriate.
-
-
-Note: it is convenient to regard edge expansion (padding to block boundaries)
-as a preprocessing/postprocessing function, even though the JPEG spec includes
-it in compression/decompression.  We do this because downsampling/upsampling
-can be simplified a little if they work on padded data: it's not necessary to
-have special cases at the right and bottom edges.  Therefore the interface
-buffer is always an integral number of blocks wide and high, and we expect
-compression preprocessing to pad the source data properly.  Padding will occur
-only to the next block (8-sample) boundary.  In an interleaved-scan situation,
-additional dummy blocks may be used to fill out MCUs, but the MCU assembly and
-disassembly logic will create or discard these blocks internally.  (This is
-advantageous for speed reasons, since we avoid DCTing the dummy blocks.
-It also permits a small reduction in file size, because the compressor can
-choose dummy block contents so as to minimize their size in compressed form.
-Finally, it makes the interface buffer specification independent of whether
-the file is actually interleaved or not.)  Applications that wish to deal
-directly with the downsampled data must provide similar buffering and padding
-for odd-sized images.
-
-
-*** Poor man's object-oriented programming ***
-
-It should be clear by now that we have a lot of quasi-independent processing
-steps, many of which have several possible behaviors.  To avoid cluttering the
-code with lots of switch statements, we use a simple form of object-style
-programming to separate out the different possibilities.
-
-For example, two different color quantization algorithms could be implemented
-as two separate modules that present the same external interface; at runtime,
-the calling code will access the proper module indirectly through an "object".
-
-We can get the limited features we need while staying within portable C.
-The basic tool is a function pointer.  An "object" is just a struct
-containing one or more function pointer fields, each of which corresponds to
-a method name in real object-oriented languages.  During initialization we
-fill in the function pointers with references to whichever module we have
-determined we need to use in this run.  Then invocation of the module is done
-by indirecting through a function pointer; on most machines this is no more
-expensive than a switch statement, which would be the only other way of
-making the required run-time choice.  The really significant benefit, of
-course, is keeping the source code clean and well structured.
-
-We can also arrange to have private storage that varies between different
-implementations of the same kind of object.  We do this by making all the
-module-specific object structs be separately allocated entities, which will
-be accessed via pointers in the master compression or decompression struct.
-The "public" fields or methods for a given kind of object are specified by
-a commonly known struct.  But a module's initialization code can allocate
-a larger struct that contains the common struct as its first member, plus
-additional private fields.  With appropriate pointer casting, the module's
-internal functions can access these private fields.  (For a simple example,
-see jdatadst.c, which implements the external interface specified by struct
-jpeg_destination_mgr, but adds extra fields.)
-
-(Of course this would all be a lot easier if we were using C++, but we are
-not yet prepared to assume that everyone has a C++ compiler.)
-
-An important benefit of this scheme is that it is easy to provide multiple
-versions of any method, each tuned to a particular case.  While a lot of
-precalculation might be done to select an optimal implementation of a method,
-the cost per invocation is constant.  For example, the upsampling step might
-have a "generic" method, plus one or more "hardwired" methods for the most
-popular sampling factors; the hardwired methods would be faster because they'd
-use straight-line code instead of for-loops.  The cost to determine which
-method to use is paid only once, at startup, and the selection criteria are
-hidden from the callers of the method.
-
-This plan differs a little bit from usual object-oriented structures, in that
-only one instance of each object class will exist during execution.  The
-reason for having the class structure is that on different runs we may create
-different instances (choose to execute different modules).  You can think of
-the term "method" as denoting the common interface presented by a particular
-set of interchangeable functions, and "object" as denoting a group of related
-methods, or the total shared interface behavior of a group of modules.
-
-
-*** Overall control structure ***
-
-We previously mentioned the need for overall control logic in the compression
-and decompression libraries.  In IJG implementations prior to v5, overall
-control was mostly provided by "pipeline control" modules, which proved to be
-large, unwieldy, and hard to understand.  To improve the situation, the
-control logic has been subdivided into multiple modules.  The control modules
-consist of:
-
-1. Master control for module selection and initialization.  This has two
-responsibilities:
-
-   1A.  Startup initialization at the beginning of image processing.
-        The individual processing modules to be used in this run are selected
-        and given initialization calls.
-
-   1B.  Per-pass control.  This determines how many passes will be performed
-        and calls each active processing module to configure itself
-        appropriately at the beginning of each pass.  End-of-pass processing,
-	where necessary, is also invoked from the master control module.
-
-   Method selection is partially distributed, in that a particular processing
-   module may contain several possible implementations of a particular method,
-   which it will select among when given its initialization call.  The master
-   control code need only be concerned with decisions that affect more than
-   one module.
- 
-2. Data buffering control.  A separate control module exists for each
-   inter-processing-step data buffer.  This module is responsible for
-   invoking the processing steps that write or read that data buffer.
-
-Each buffer controller sees the world as follows:
-
-input data => processing step A => buffer => processing step B => output data
-                      |              |               |
-              ------------------ controller ------------------
-
-The controller knows the dataflow requirements of steps A and B: how much data
-they want to accept in one chunk and how much they output in one chunk.  Its
-function is to manage its buffer and call A and B at the proper times.
-
-A data buffer control module may itself be viewed as a processing step by a
-higher-level control module; thus the control modules form a binary tree with
-elementary processing steps at the leaves of the tree.
-
-The control modules are objects.  A considerable amount of flexibility can
-be had by replacing implementations of a control module.  For example:
-* Merging of adjacent steps in the pipeline is done by replacing a control
-  module and its pair of processing-step modules with a single processing-
-  step module.  (Hence the possible merges are determined by the tree of
-  control modules.)
-* In some processing modes, a given interstep buffer need only be a "strip"
-  buffer large enough to accommodate the desired data chunk sizes.  In other
-  modes, a full-image buffer is needed and several passes are required.
-  The control module determines which kind of buffer is used and manipulates
-  virtual array buffers as needed.  One or both processing steps may be
-  unaware of the multi-pass behavior.
-
-In theory, we might be able to make all of the data buffer controllers
-interchangeable and provide just one set of implementations for all.  In
-practice, each one contains considerable special-case processing for its
-particular job.  The buffer controller concept should be regarded as an
-overall system structuring principle, not as a complete description of the
-task performed by any one controller.
-
-
-*** Compression object structure ***
-
-Here is a sketch of the logical structure of the JPEG compression library:
-
-                                                 |-- Colorspace conversion
-                  |-- Preprocessing controller --|
-                  |                              |-- Downsampling
-Main controller --|
-                  |                            |-- Forward DCT, quantize
-                  |-- Coefficient controller --|
-                                               |-- Entropy encoding
-
-This sketch also describes the flow of control (subroutine calls) during
-typical image data processing.  Each of the components shown in the diagram is
-an "object" which may have several different implementations available.  One
-or more source code files contain the actual implementation(s) of each object.
-
-The objects shown above are:
-
-* Main controller: buffer controller for the subsampled-data buffer, which
-  holds the preprocessed input data.  This controller invokes preprocessing to
-  fill the subsampled-data buffer, and JPEG compression to empty it.  There is
-  usually no need for a full-image buffer here; a strip buffer is adequate.
-
-* Preprocessing controller: buffer controller for the downsampling input data
-  buffer, which lies between colorspace conversion and downsampling.  Note
-  that a unified conversion/downsampling module would probably replace this
-  controller entirely.
-
-* Colorspace conversion: converts application image data into the desired
-  JPEG color space; also changes the data from pixel-interleaved layout to
-  separate component planes.  Processes one pixel row at a time.
-
-* Downsampling: performs reduction of chroma components as required.
-  Optionally may perform pixel-level smoothing as well.  Processes a "row
-  group" at a time, where a row group is defined as Vmax pixel rows of each
-  component before downsampling, and Vk sample rows afterwards (remember Vk
-  differs across components).  Some downsampling or smoothing algorithms may
-  require context rows above and below the current row group; the
-  preprocessing controller is responsible for supplying these rows via proper
-  buffering.  The downsampler is responsible for edge expansion at the right
-  edge (i.e., extending each sample row to a multiple of 8 samples); but the
-  preprocessing controller is responsible for vertical edge expansion (i.e.,
-  duplicating the bottom sample row as needed to make a multiple of 8 rows).
-
-* Coefficient controller: buffer controller for the DCT-coefficient data.
-  This controller handles MCU assembly, including insertion of dummy DCT
-  blocks when needed at the right or bottom edge.  When performing
-  Huffman-code optimization or emitting a multiscan JPEG file, this
-  controller is responsible for buffering the full image.  The equivalent of
-  one fully interleaved MCU row of subsampled data is processed per call,
-  even when the JPEG file is noninterleaved.
-
-* Forward DCT and quantization: Perform DCT, quantize, and emit coefficients.
-  Works on one or more DCT blocks at a time.  (Note: the coefficients are now
-  emitted in normal array order, which the entropy encoder is expected to
-  convert to zigzag order as necessary.  Prior versions of the IJG code did
-  the conversion to zigzag order within the quantization step.)
-
-* Entropy encoding: Perform Huffman or arithmetic entropy coding and emit the
-  coded data to the data destination module.  Works on one MCU per call.
-  For progressive JPEG, the same DCT blocks are fed to the entropy coder
-  during each pass, and the coder must emit the appropriate subset of
-  coefficients.
-
-In addition to the above objects, the compression library includes these
-objects:
-
-* Master control: determines the number of passes required, controls overall
-  and per-pass initialization of the other modules.
-
-* Marker writing: generates JPEG markers (except for RSTn, which is emitted
-  by the entropy encoder when needed).
-
-* Data destination manager: writes the output JPEG datastream to its final
-  destination (e.g., a file).  The destination manager supplied with the
-  library knows how to write to a stdio stream; for other behaviors, the
-  surrounding application may provide its own destination manager.
-
-* Memory manager: allocates and releases memory, controls virtual arrays
-  (with backing store management, where required).
-
-* Error handler: performs formatting and output of error and trace messages;
-  determines handling of nonfatal errors.  The surrounding application may
-  override some or all of this object's methods to change error handling.
-
-* Progress monitor: supports output of "percent-done" progress reports.
-  This object represents an optional callback to the surrounding application:
-  if wanted, it must be supplied by the application.
-
-The error handler, destination manager, and progress monitor objects are
-defined as separate objects in order to simplify application-specific
-customization of the JPEG library.  A surrounding application may override
-individual methods or supply its own all-new implementation of one of these
-objects.  The object interfaces for these objects are therefore treated as
-part of the application interface of the library, whereas the other objects
-are internal to the library.
-
-The error handler and memory manager are shared by JPEG compression and
-decompression; the progress monitor, if used, may be shared as well.
-
-
-*** Decompression object structure ***
-
-Here is a sketch of the logical structure of the JPEG decompression library:
-
-                                               |-- Entropy decoding
-                  |-- Coefficient controller --|
-                  |                            |-- Dequantize, Inverse DCT
-Main controller --|
-                  |                               |-- Upsampling
-                  |-- Postprocessing controller --|   |-- Colorspace conversion
-                                                  |-- Color quantization
-                                                  |-- Color precision reduction
-
-As before, this diagram also represents typical control flow.  The objects
-shown are:
-
-* Main controller: buffer controller for the subsampled-data buffer, which
-  holds the output of JPEG decompression proper.  This controller's primary
-  task is to feed the postprocessing procedure.  Some upsampling algorithms
-  may require context rows above and below the current row group; when this
-  is true, the main controller is responsible for managing its buffer so as
-  to make context rows available.  In the current design, the main buffer is
-  always a strip buffer; a full-image buffer is never required.
-
-* Coefficient controller: buffer controller for the DCT-coefficient data.
-  This controller handles MCU disassembly, including deletion of any dummy
-  DCT blocks at the right or bottom edge.  When reading a multiscan JPEG
-  file, this controller is responsible for buffering the full image.
-  (Buffering DCT coefficients, rather than samples, is necessary to support
-  progressive JPEG.)  The equivalent of one fully interleaved MCU row of
-  subsampled data is processed per call, even when the source JPEG file is
-  noninterleaved.
-
-* Entropy decoding: Read coded data from the data source module and perform
-  Huffman or arithmetic entropy decoding.  Works on one MCU per call.
-  For progressive JPEG decoding, the coefficient controller supplies the prior
-  coefficients of each MCU (initially all zeroes), which the entropy decoder
-  modifies in each scan.
-
-* Dequantization and inverse DCT: like it says.  Note that the coefficients
-  buffered by the coefficient controller have NOT been dequantized; we
-  merge dequantization and inverse DCT into a single step for speed reasons.
-  When scaled-down output is asked for, simplified DCT algorithms may be used
-  that emit only 1x1, 2x2, or 4x4 samples per DCT block, not the full 8x8.
-  Works on one DCT block at a time.
-
-* Postprocessing controller: buffer controller for the color quantization
-  input buffer, when quantization is in use.  (Without quantization, this
-  controller just calls the upsampler.)  For two-pass quantization, this
-  controller is responsible for buffering the full-image data.
-
-* Upsampling: restores chroma components to full size.  (May support more
-  general output rescaling, too.  Note that if undersized DCT outputs have
-  been emitted by the DCT module, this module must adjust so that properly
-  sized outputs are created.)  Works on one row group at a time.  This module
-  also calls the color conversion module, so its top level is effectively a
-  buffer controller for the upsampling->color conversion buffer.  However, in
-  all but the highest-quality operating modes, upsampling and color
-  conversion are likely to be merged into a single step.
-
-* Colorspace conversion: convert from JPEG color space to output color space,
-  and change data layout from separate component planes to pixel-interleaved.
-  Works on one pixel row at a time.
-
-* Color quantization: reduce the data to colormapped form, using either an
-  externally specified colormap or an internally generated one.  This module
-  is not used for full-color output.  Works on one pixel row at a time; may
-  require two passes to generate a color map.  Note that the output will
-  always be a single component representing colormap indexes.  In the current
-  design, the output values are JSAMPLEs, so an 8-bit compilation cannot
-  quantize to more than 256 colors.  This is unlikely to be a problem in
-  practice.
-
-* Color reduction: this module handles color precision reduction, e.g.,
-  generating 15-bit color (5 bits/primary) from JPEG's 24-bit output.
-  Not quite clear yet how this should be handled... should we merge it with
-  colorspace conversion???
-
-Note that some high-speed operating modes might condense the entire
-postprocessing sequence to a single module (upsample, color convert, and
-quantize in one step).
-
-In addition to the above objects, the decompression library includes these
-objects:
-
-* Master control: determines the number of passes required, controls overall
-  and per-pass initialization of the other modules.  This is subdivided into
-  input and output control: jdinput.c controls only input-side processing,
-  while jdmaster.c handles overall initialization and output-side control.
-
-* Marker reading: decodes JPEG markers (except for RSTn).
-
-* Data source manager: supplies the input JPEG datastream.  The source
-  manager supplied with the library knows how to read from a stdio stream;
-  for other behaviors, the surrounding application may provide its own source
-  manager.
-
-* Memory manager: same as for compression library.
-
-* Error handler: same as for compression library.
-
-* Progress monitor: same as for compression library.
-
-As with compression, the data source manager, error handler, and progress
-monitor are candidates for replacement by a surrounding application.
-
-
-*** Decompression input and output separation ***
-
-To support efficient incremental display of progressive JPEG files, the
-decompressor is divided into two sections that can run independently:
-
-1. Data input includes marker parsing, entropy decoding, and input into the
-   coefficient controller's DCT coefficient buffer.  Note that this
-   processing is relatively cheap and fast.
-
-2. Data output reads from the DCT coefficient buffer and performs the IDCT
-   and all postprocessing steps.
-
-For a progressive JPEG file, the data input processing is allowed to get
-arbitrarily far ahead of the data output processing.  (This occurs only
-if the application calls jpeg_consume_input(); otherwise input and output
-run in lockstep, since the input section is called only when the output
-section needs more data.)  In this way the application can avoid making
-extra display passes when data is arriving faster than the display pass
-can run.  Furthermore, it is possible to abort an output pass without
-losing anything, since the coefficient buffer is read-only as far as the
-output section is concerned.  See libjpeg.doc for more detail.
-
-A full-image coefficient array is only created if the JPEG file has multiple
-scans (or if the application specifies buffered-image mode anyway).  When
-reading a single-scan file, the coefficient controller normally creates only
-a one-MCU buffer, so input and output processing must run in lockstep in this
-case.  jpeg_consume_input() is effectively a no-op in this situation.
-
-The main impact of dividing the decompressor in this fashion is that we must
-be very careful with shared variables in the cinfo data structure.  Each
-variable that can change during the course of decompression must be
-classified as belonging to data input or data output, and each section must
-look only at its own variables.  For example, the data output section may not
-depend on any of the variables that describe the current scan in the JPEG
-file, because these may change as the data input section advances into a new
-scan.
-
-The progress monitor is (somewhat arbitrarily) defined to treat input of the
-file as one pass when buffered-image mode is not used, and to ignore data
-input work completely when buffered-image mode is used.  Note that the
-library has no reliable way to predict the number of passes when dealing
-with a progressive JPEG file, nor can it predict the number of output passes
-in buffered-image mode.  So the work estimate is inherently bogus anyway.
-
-No comparable division is currently made in the compression library, because
-there isn't any real need for it.
-
-
-*** Data formats ***
-
-Arrays of pixel sample values use the following data structure:
-
-    typedef something JSAMPLE;		a pixel component value, 0..MAXJSAMPLE
-    typedef JSAMPLE *JSAMPROW;		ptr to a row of samples
-    typedef JSAMPROW *JSAMPARRAY;	ptr to a list of rows
-    typedef JSAMPARRAY *JSAMPIMAGE;	ptr to a list of color-component arrays
-
-The basic element type JSAMPLE will typically be one of unsigned char,
-(signed) char, or short.  Short will be used if samples wider than 8 bits are
-to be supported (this is a compile-time option).  Otherwise, unsigned char is
-used if possible.  If the compiler only supports signed chars, then it is
-necessary to mask off the value when reading.  Thus, all reads of JSAMPLE
-values must be coded as "GETJSAMPLE(value)", where the macro will be defined
-as "((value) & 0xFF)" on signed-char machines and "((int) (value))" elsewhere.
-
-With these conventions, JSAMPLE values can be assumed to be >= 0.  This helps
-simplify correct rounding during downsampling, etc.  The JPEG standard's
-specification that sample values run from -128..127 is accommodated by
-subtracting 128 just as the sample value is copied into the source array for
-the DCT step (this will be an array of signed ints).  Similarly, during
-decompression the output of the IDCT step will be immediately shifted back to
-0..255.  (NB: different values are required when 12-bit samples are in use.
-The code is written in terms of MAXJSAMPLE and CENTERJSAMPLE, which will be
-defined as 255 and 128 respectively in an 8-bit implementation, and as 4095
-and 2048 in a 12-bit implementation.)
-
-We use a pointer per row, rather than a two-dimensional JSAMPLE array.  This
-choice costs only a small amount of memory and has several benefits:
-* Code using the data structure doesn't need to know the allocated width of
-  the rows.  This simplifies edge expansion/compression, since we can work
-  in an array that's wider than the logical picture width.
-* Indexing doesn't require multiplication; this is a performance win on many
-  machines.
-* Arrays with more than 64K total elements can be supported even on machines
-  where malloc() cannot allocate chunks larger than 64K.
-* The rows forming a component array may be allocated at different times
-  without extra copying.  This trick allows some speedups in smoothing steps
-  that need access to the previous and next rows.
-
-Note that each color component is stored in a separate array; we don't use the
-traditional layout in which the components of a pixel are stored together.
-This simplifies coding of modules that work on each component independently,
-because they don't need to know how many components there are.  Furthermore,
-we can read or write each component to a temporary file independently, which
-is helpful when dealing with noninterleaved JPEG files.
-
-In general, a specific sample value is accessed by code such as
-	GETJSAMPLE(image[colorcomponent][row][col])
-where col is measured from the image left edge, but row is measured from the
-first sample row currently in memory.  Either of the first two indexings can
-be precomputed by copying the relevant pointer.
-
-
-Since most image-processing applications prefer to work on images in which
-the components of a pixel are stored together, the data passed to or from the
-surrounding application uses the traditional convention: a single pixel is
-represented by N consecutive JSAMPLE values, and an image row is an array of
-(# of color components)*(image width) JSAMPLEs.  One or more rows of data can
-be represented by a pointer of type JSAMPARRAY in this scheme.  This scheme is
-converted to component-wise storage inside the JPEG library.  (Applications
-that want to skip JPEG preprocessing or postprocessing will have to contend
-with component-wise storage.)
-
-
-Arrays of DCT-coefficient values use the following data structure:
-
-    typedef short JCOEF;		a 16-bit signed integer
-    typedef JCOEF JBLOCK[DCTSIZE2];	an 8x8 block of coefficients
-    typedef JBLOCK *JBLOCKROW;		ptr to one horizontal row of 8x8 blocks
-    typedef JBLOCKROW *JBLOCKARRAY;	ptr to a list of such rows
-    typedef JBLOCKARRAY *JBLOCKIMAGE;	ptr to a list of color component arrays
-
-The underlying type is at least a 16-bit signed integer; while "short" is big
-enough on all machines of interest, on some machines it is preferable to use
-"int" for speed reasons, despite the storage cost.  Coefficients are grouped
-into 8x8 blocks (but we always use #defines DCTSIZE and DCTSIZE2 rather than
-"8" and "64").
-
-The contents of a coefficient block may be in either "natural" or zigzagged
-order, and may be true values or divided by the quantization coefficients,
-depending on where the block is in the processing pipeline.  In the current
-library, coefficient blocks are kept in natural order everywhere; the entropy
-codecs zigzag or dezigzag the data as it is written or read.  The blocks
-contain quantized coefficients everywhere outside the DCT/IDCT subsystems.
-(This latter decision may need to be revisited to support variable
-quantization a la JPEG Part 3.)
-
-Notice that the allocation unit is now a row of 8x8 blocks, corresponding to
-eight rows of samples.  Otherwise the structure is much the same as for
-samples, and for the same reasons.
-
-On machines where malloc() can't handle a request bigger than 64Kb, this data
-structure limits us to rows of less than 512 JBLOCKs, or a picture width of
-4000+ pixels.  This seems an acceptable restriction.
-
-
-On 80x86 machines, the bottom-level pointer types (JSAMPROW and JBLOCKROW)
-must be declared as "far" pointers, but the upper levels can be "near"
-(implying that the pointer lists are allocated in the DS segment).
-We use a #define symbol FAR, which expands to the "far" keyword when
-compiling on 80x86 machines and to nothing elsewhere.
-
-
-*** Suspendable processing ***
-
-In some applications it is desirable to use the JPEG library as an
-incremental, memory-to-memory filter.  In this situation the data source or
-destination may be a limited-size buffer, and we can't rely on being able to
-empty or refill the buffer at arbitrary times.  Instead the application would
-like to have control return from the library at buffer overflow/underrun, and
-then resume compression or decompression at a later time.
-
-This scenario is supported for simple cases.  (For anything more complex, we
-recommend that the application "bite the bullet" and develop real multitasking
-capability.)  The libjpeg.doc file goes into more detail about the usage and
-limitations of this capability; here we address the implications for library
-structure.
-
-The essence of the problem is that the entropy codec (coder or decoder) must
-be prepared to stop at arbitrary times.  In turn, the controllers that call
-the entropy codec must be able to stop before having produced or consumed all
-the data that they normally would handle in one call.  That part is reasonably
-straightforward: we make the controller call interfaces include "progress
-counters" which indicate the number of data chunks successfully processed, and
-we require callers to test the counter rather than just assume all of the data
-was processed.
-
-Rather than trying to restart at an arbitrary point, the current Huffman
-codecs are designed to restart at the beginning of the current MCU after a
-suspension due to buffer overflow/underrun.  At the start of each call, the
-codec's internal state is loaded from permanent storage (in the JPEG object
-structures) into local variables.  On successful completion of the MCU, the
-permanent state is updated.  (This copying is not very expensive, and may even
-lead to *improved* performance if the local variables can be registerized.)
-If a suspension occurs, the codec simply returns without updating the state,
-thus effectively reverting to the start of the MCU.  Note that this implies
-leaving some data unprocessed in the source/destination buffer (ie, the
-compressed partial MCU).  The data source/destination module interfaces are
-specified so as to make this possible.  This also implies that the data buffer
-must be large enough to hold a worst-case compressed MCU; a couple thousand
-bytes should be enough.
-
-In a successive-approximation AC refinement scan, the progressive Huffman
-decoder has to be able to undo assignments of newly nonzero coefficients if it
-suspends before the MCU is complete, since decoding requires distinguishing
-previously-zero and previously-nonzero coefficients.  This is a bit tedious
-but probably won't have much effect on performance.  Other variants of Huffman
-decoding need not worry about this, since they will just store the same values
-again if forced to repeat the MCU.
-
-This approach would probably not work for an arithmetic codec, since its
-modifiable state is quite large and couldn't be copied cheaply.  Instead it
-would have to suspend and resume exactly at the point of the buffer end.
-
-The JPEG marker reader is designed to cope with suspension at an arbitrary
-point.  It does so by backing up to the start of the marker parameter segment,
-so the data buffer must be big enough to hold the largest marker of interest.
-Again, a couple KB should be adequate.  (A special "skip" convention is used
-to bypass COM and APPn markers, so these can be larger than the buffer size
-without causing problems; otherwise a 64K buffer would be needed in the worst
-case.)
-
-The JPEG marker writer currently does *not* cope with suspension.  I feel that
-this is not necessary; it is much easier simply to require the application to
-ensure there is enough buffer space before starting.  (An empty 2K buffer is
-more than sufficient for the header markers; and ensuring there are a dozen or
-two bytes available before calling jpeg_finish_compress() will suffice for the
-trailer.)  This would not work for writing multi-scan JPEG files, but
-we simply do not intend to support that capability with suspension.
-
-
-*** Memory manager services ***
-
-The JPEG library's memory manager controls allocation and deallocation of
-memory, and it manages large "virtual" data arrays on machines where the
-operating system does not provide virtual memory.  Note that the same
-memory manager serves both compression and decompression operations.
-
-In all cases, allocated objects are tied to a particular compression or
-decompression master record, and they will be released when that master
-record is destroyed.
-
-The memory manager does not provide explicit deallocation of objects.
-Instead, objects are created in "pools" of free storage, and a whole pool
-can be freed at once.  This approach helps prevent storage-leak bugs, and
-it speeds up operations whenever malloc/free are slow (as they often are).
-The pools can be regarded as lifetime identifiers for objects.  Two
-pools/lifetimes are defined:
-  * JPOOL_PERMANENT	lasts until master record is destroyed
-  * JPOOL_IMAGE		lasts until done with image (JPEG datastream)
-Permanent lifetime is used for parameters and tables that should be carried
-across from one datastream to another; this includes all application-visible
-parameters.  Image lifetime is used for everything else.  (A third lifetime,
-JPOOL_PASS = one processing pass, was originally planned.  However it was
-dropped as not being worthwhile.  The actual usage patterns are such that the
-peak memory usage would be about the same anyway; and having per-pass storage
-substantially complicates the virtual memory allocation rules --- see below.)
-
-The memory manager deals with three kinds of object:
-1. "Small" objects.  Typically these require no more than 10K-20K total.
-2. "Large" objects.  These may require tens to hundreds of K depending on
-   image size.  Semantically they behave the same as small objects, but we
-   distinguish them for two reasons:
-     * On MS-DOS machines, large objects are referenced by FAR pointers,
-       small objects by NEAR pointers.
-     * Pool allocation heuristics may differ for large and small objects.
-   Note that individual "large" objects cannot exceed the size allowed by
-   type size_t, which may be 64K or less on some machines.
-3. "Virtual" objects.  These are large 2-D arrays of JSAMPLEs or JBLOCKs
-   (typically large enough for the entire image being processed).  The
-   memory manager provides stripwise access to these arrays.  On machines
-   without virtual memory, the rest of the array may be swapped out to a
-   temporary file.
-
-(Note: JSAMPARRAY and JBLOCKARRAY data structures are a combination of large
-objects for the data proper and small objects for the row pointers.  For
-convenience and speed, the memory manager provides single routines to create
-these structures.  Similarly, virtual arrays include a small control block
-and a JSAMPARRAY or JBLOCKARRAY working buffer, all created with one call.)
-
-In the present implementation, virtual arrays are only permitted to have image
-lifespan.  (Permanent lifespan would not be reasonable, and pass lifespan is
-not very useful since a virtual array's raison d'etre is to store data for
-multiple passes through the image.)  We also expect that only "small" objects
-will be given permanent lifespan, though this restriction is not required by
-the memory manager.
-
-In a non-virtual-memory machine, some performance benefit can be gained by
-making the in-memory buffers for virtual arrays be as large as possible.
-(For small images, the buffers might fit entirely in memory, so blind
-swapping would be very wasteful.)  The memory manager will adjust the height
-of the buffers to fit within a prespecified maximum memory usage.  In order
-to do this in a reasonably optimal fashion, the manager needs to allocate all
-of the virtual arrays at once.  Therefore, there isn't a one-step allocation
-routine for virtual arrays; instead, there is a "request" routine that simply
-allocates the control block, and a "realize" routine (called just once) that
-determines space allocation and creates all of the actual buffers.  The
-realize routine must allow for space occupied by non-virtual large objects.
-(We don't bother to factor in the space needed for small objects, on the
-grounds that it isn't worth the trouble.)
-
-To support all this, we establish the following protocol for doing business
-with the memory manager:
-  1. Modules must request virtual arrays (which may have only image lifespan)
-     during the initial setup phase, i.e., in their jinit_xxx routines.
-  2. All "large" objects (including JSAMPARRAYs and JBLOCKARRAYs) must also be
-     allocated during initial setup.
-  3. realize_virt_arrays will be called at the completion of initial setup.
-     The above conventions ensure that sufficient information is available
-     for it to choose a good size for virtual array buffers.
-Small objects of any lifespan may be allocated at any time.  We expect that
-the total space used for small objects will be small enough to be negligible
-in the realize_virt_arrays computation.
-
-In a virtual-memory machine, we simply pretend that the available space is
-infinite, thus causing realize_virt_arrays to decide that it can allocate all
-the virtual arrays as full-size in-memory buffers.  The overhead of the
-virtual-array access protocol is very small when no swapping occurs.
-
-A virtual array can be specified to be "pre-zeroed"; when this flag is set,
-never-yet-written sections of the array are set to zero before being made
-available to the caller.  If this flag is not set, never-written sections
-of the array contain garbage.  (This feature exists primarily because the
-equivalent logic would otherwise be needed in jdcoefct.c for progressive
-JPEG mode; we may as well make it available for possible other uses.)
-
-The first write pass on a virtual array is required to occur in top-to-bottom
-order; read passes, as well as any write passes after the first one, may
-access the array in any order.  This restriction exists partly to simplify
-the virtual array control logic, and partly because some file systems may not
-support seeking beyond the current end-of-file in a temporary file.  The main
-implication of this restriction is that rearrangement of rows (such as
-converting top-to-bottom data order to bottom-to-top) must be handled while
-reading data out of the virtual array, not while putting it in.
-
-
-*** Memory manager internal structure ***
-
-To isolate system dependencies as much as possible, we have broken the
-memory manager into two parts.  There is a reasonably system-independent
-"front end" (jmemmgr.c) and a "back end" that contains only the code
-likely to change across systems.  All of the memory management methods
-outlined above are implemented by the front end.  The back end provides
-the following routines for use by the front end (none of these routines
-are known to the rest of the JPEG code):
-
-jpeg_mem_init, jpeg_mem_term	system-dependent initialization/shutdown
-
-jpeg_get_small, jpeg_free_small	interface to malloc and free library routines
-				(or their equivalents)
-
-jpeg_get_large, jpeg_free_large	interface to FAR malloc/free in MSDOS machines;
-				else usually the same as
-				jpeg_get_small/jpeg_free_small
-
-jpeg_mem_available		estimate available memory
-
-jpeg_open_backing_store		create a backing-store object
-
-read_backing_store,		manipulate a backing-store object
-write_backing_store,
-close_backing_store
-
-On some systems there will be more than one type of backing-store object
-(specifically, in MS-DOS a backing store file might be an area of extended
-memory as well as a disk file).  jpeg_open_backing_store is responsible for
-choosing how to implement a given object.  The read/write/close routines
-are method pointers in the structure that describes a given object; this
-lets them be different for different object types.
-
-It may be necessary to ensure that backing store objects are explicitly
-released upon abnormal program termination.  For example, MS-DOS won't free
-extended memory by itself.  To support this, we will expect the main program
-or surrounding application to arrange to call self_destruct (typically via
-jpeg_destroy) upon abnormal termination.  This may require a SIGINT signal
-handler or equivalent.  We don't want to have the back end module install its
-own signal handler, because that would pre-empt the surrounding application's
-ability to control signal handling.
-
-The IJG distribution includes several memory manager back end implementations.
-Usually the same back end should be suitable for all applications on a given
-system, but it is possible for an application to supply its own back end at
-need.
-
-
-*** Implications of DNL marker ***
-
-Some JPEG files may use a DNL marker to postpone definition of the image
-height (this would be useful for a fax-like scanner's output, for instance).
-In these files the SOF marker claims the image height is 0, and you only
-find out the true image height at the end of the first scan.
-
-We could read these files as follows:
-1. Upon seeing zero image height, replace it by 65535 (the maximum allowed).
-2. When the DNL is found, update the image height in the global image
-   descriptor.
-This implies that control modules must avoid making copies of the image
-height, and must re-test for termination after each MCU row.  This would
-be easy enough to do.
-
-In cases where image-size data structures are allocated, this approach will
-result in very inefficient use of virtual memory or much-larger-than-necessary
-temporary files.  This seems acceptable for something that probably won't be a
-mainstream usage.  People might have to forgo use of memory-hogging options
-(such as two-pass color quantization or noninterleaved JPEG files) if they
-want efficient conversion of such files.  (One could improve efficiency by
-demanding a user-supplied upper bound for the height, less than 65536; in most
-cases it could be much less.)
-
-The standard also permits the SOF marker to overestimate the image height,
-with a DNL to give the true, smaller height at the end of the first scan.
-This would solve the space problems if the overestimate wasn't too great.
-However, it implies that you don't even know whether DNL will be used.
-
-This leads to a couple of very serious objections:
-1. Testing for a DNL marker must occur in the inner loop of the decompressor's
-   Huffman decoder; this implies a speed penalty whether the feature is used
-   or not.
-2. There is no way to hide the last-minute change in image height from an
-   application using the decoder.  Thus *every* application using the IJG
-   library would suffer a complexity penalty whether it cared about DNL or
-   not.
-We currently do not support DNL because of these problems.
-
-A different approach is to insist that DNL-using files be preprocessed by a
-separate program that reads ahead to the DNL, then goes back and fixes the SOF
-marker.  This is a much simpler solution and is probably far more efficient.
-Even if one wants piped input, buffering the first scan of the JPEG file needs
-a lot smaller temp file than is implied by the maximum-height method.  For
-this approach we'd simply treat DNL as a no-op in the decompressor (at most,
-check that it matches the SOF image height).
-
-We will not worry about making the compressor capable of outputting DNL.
-Something similar to the first scheme above could be applied if anyone ever
-wants to make that work.

Engine/lib/ljpeg/extras/transupp.c

@@ -1,928 +0,0 @@
-/*
- * transupp.c
- *
- * Copyright (C) 1997, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains image transformation routines and other utility code
- * used by the jpegtran sample application.  These are NOT part of the core
- * JPEG library.  But we keep these routines separate from jpegtran.c to
- * ease the task of maintaining jpegtran-like programs that have other user
- * interfaces.
- */
-
-/* Although this file really shouldn't have access to the library internals,
- * it's helpful to let it call jround_up() and jcopy_block_row().
- */
-#define JPEG_INTERNALS
-
-#include "jinclude.h"
-#include "jpeglib.h"
-#include "transupp.h"		/* My own external interface */
-
-
-#if TRANSFORMS_SUPPORTED
-
-/*
- * Lossless image transformation routines.  These routines work on DCT
- * coefficient arrays and thus do not require any lossy decompression
- * or recompression of the image.
- * Thanks to Guido Vollbeding for the initial design and code of this feature.
- *
- * Horizontal flipping is done in-place, using a single top-to-bottom
- * pass through the virtual source array.  It will thus be much the
- * fastest option for images larger than main memory.
- *
- * The other routines require a set of destination virtual arrays, so they
- * need twice as much memory as jpegtran normally does.  The destination
- * arrays are always written in normal scan order (top to bottom) because
- * the virtual array manager expects this.  The source arrays will be scanned
- * in the corresponding order, which means multiple passes through the source
- * arrays for most of the transforms.  That could result in much thrashing
- * if the image is larger than main memory.
- *
- * Some notes about the operating environment of the individual transform
- * routines:
- * 1. Both the source and destination virtual arrays are allocated from the
- *    source JPEG object, and therefore should be manipulated by calling the
- *    source's memory manager.
- * 2. The destination's component count should be used.  It may be smaller
- *    than the source's when forcing to grayscale.
- * 3. Likewise the destination's sampling factors should be used.  When
- *    forcing to grayscale the destination's sampling factors will be all 1,
- *    and we may as well take that as the effective iMCU size.
- * 4. When "trim" is in effect, the destination's dimensions will be the
- *    trimmed values but the source's will be untrimmed.
- * 5. All the routines assume that the source and destination buffers are
- *    padded out to a full iMCU boundary.  This is true, although for the
- *    source buffer it is an undocumented property of jdcoefct.c.
- * Notes 2,3,4 boil down to this: generally we should use the destination's
- * dimensions and ignore the source's.
- */
-
-
-LOCAL(void)
-do_flip_h (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
-	   jvirt_barray_ptr *src_coef_arrays)
-/* Horizontal flip; done in-place, so no separate dest array is required */
-{
-  JDIMENSION MCU_cols, comp_width, blk_x, blk_y;
-  int ci, k, offset_y;
-  JBLOCKARRAY buffer;
-  JCOEFPTR ptr1, ptr2;
-  JCOEF temp1, temp2;
-  jpeg_component_info *compptr;
-
-  /* Horizontal mirroring of DCT blocks is accomplished by swapping
-   * pairs of blocks in-place.  Within a DCT block, we perform horizontal
-   * mirroring by changing the signs of odd-numbered columns.
-   * Partial iMCUs at the right edge are left untouched.
-   */
-  MCU_cols = dstinfo->image_width / (dstinfo->max_h_samp_factor * DCTSIZE);
-
-  for (ci = 0; ci < dstinfo->num_components; ci++) {
-    compptr = dstinfo->comp_info + ci;
-    comp_width = MCU_cols * compptr->h_samp_factor;
-    for (blk_y = 0; blk_y < compptr->height_in_blocks;
-	 blk_y += compptr->v_samp_factor) {
-      buffer = (*srcinfo->mem->access_virt_barray)
-	((j_common_ptr) srcinfo, src_coef_arrays[ci], blk_y,
-	 (JDIMENSION) compptr->v_samp_factor, TRUE);
-      for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
-	for (blk_x = 0; blk_x * 2 < comp_width; blk_x++) {
-	  ptr1 = buffer[offset_y][blk_x];
-	  ptr2 = buffer[offset_y][comp_width - blk_x - 1];
-	  /* this unrolled loop doesn't need to know which row it's on... */
-	  for (k = 0; k < DCTSIZE2; k += 2) {
-	    temp1 = *ptr1;	/* swap even column */
-	    temp2 = *ptr2;
-	    *ptr1++ = temp2;
-	    *ptr2++ = temp1;
-	    temp1 = *ptr1;	/* swap odd column with sign change */
-	    temp2 = *ptr2;
-	    *ptr1++ = -temp2;
-	    *ptr2++ = -temp1;
-	  }
-	}
-      }
-    }
-  }
-}
-
-
-LOCAL(void)
-do_flip_v (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
-	   jvirt_barray_ptr *src_coef_arrays,
-	   jvirt_barray_ptr *dst_coef_arrays)
-/* Vertical flip */
-{
-  JDIMENSION MCU_rows, comp_height, dst_blk_x, dst_blk_y;
-  int ci, i, j, offset_y;
-  JBLOCKARRAY src_buffer, dst_buffer;
-  JBLOCKROW src_row_ptr, dst_row_ptr;
-  JCOEFPTR src_ptr, dst_ptr;
-  jpeg_component_info *compptr;
-
-  /* We output into a separate array because we can't touch different
-   * rows of the source virtual array simultaneously.  Otherwise, this
-   * is a pretty straightforward analog of horizontal flip.
-   * Within a DCT block, vertical mirroring is done by changing the signs
-   * of odd-numbered rows.
-   * Partial iMCUs at the bottom edge are copied verbatim.
-   */
-  MCU_rows = dstinfo->image_height / (dstinfo->max_v_samp_factor * DCTSIZE);
-
-  for (ci = 0; ci < dstinfo->num_components; ci++) {
-    compptr = dstinfo->comp_info + ci;
-    comp_height = MCU_rows * compptr->v_samp_factor;
-    for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
-	 dst_blk_y += compptr->v_samp_factor) {
-      dst_buffer = (*srcinfo->mem->access_virt_barray)
-	((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y,
-	 (JDIMENSION) compptr->v_samp_factor, TRUE);
-      if (dst_blk_y < comp_height) {
-	/* Row is within the mirrorable area. */
-	src_buffer = (*srcinfo->mem->access_virt_barray)
-	  ((j_common_ptr) srcinfo, src_coef_arrays[ci],
-	   comp_height - dst_blk_y - (JDIMENSION) compptr->v_samp_factor,
-	   (JDIMENSION) compptr->v_samp_factor, FALSE);
-      } else {
-	/* Bottom-edge blocks will be copied verbatim. */
-	src_buffer = (*srcinfo->mem->access_virt_barray)
-	  ((j_common_ptr) srcinfo, src_coef_arrays[ci], dst_blk_y,
-	   (JDIMENSION) compptr->v_samp_factor, FALSE);
-      }
-      for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
-	if (dst_blk_y < comp_height) {
-	  /* Row is within the mirrorable area. */
-	  dst_row_ptr = dst_buffer[offset_y];
-	  src_row_ptr = src_buffer[compptr->v_samp_factor - offset_y - 1];
-	  for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks;
-	       dst_blk_x++) {
-	    dst_ptr = dst_row_ptr[dst_blk_x];
-	    src_ptr = src_row_ptr[dst_blk_x];
-	    for (i = 0; i < DCTSIZE; i += 2) {
-	      /* copy even row */
-	      for (j = 0; j < DCTSIZE; j++)
-		*dst_ptr++ = *src_ptr++;
-	      /* copy odd row with sign change */
-	      for (j = 0; j < DCTSIZE; j++)
-		*dst_ptr++ = - *src_ptr++;
-	    }
-	  }
-	} else {
-	  /* Just copy row verbatim. */
-	  jcopy_block_row(src_buffer[offset_y], dst_buffer[offset_y],
-			  compptr->width_in_blocks);
-	}
-      }
-    }
-  }
-}
-
-
-LOCAL(void)
-do_transpose (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
-	      jvirt_barray_ptr *src_coef_arrays,
-	      jvirt_barray_ptr *dst_coef_arrays)
-/* Transpose source into destination */
-{
-  JDIMENSION dst_blk_x, dst_blk_y;
-  int ci, i, j, offset_x, offset_y;
-  JBLOCKARRAY src_buffer, dst_buffer;
-  JCOEFPTR src_ptr, dst_ptr;
-  jpeg_component_info *compptr;
-
-  /* Transposing pixels within a block just requires transposing the
-   * DCT coefficients.
-   * Partial iMCUs at the edges require no special treatment; we simply
-   * process all the available DCT blocks for every component.
-   */
-  for (ci = 0; ci < dstinfo->num_components; ci++) {
-    compptr = dstinfo->comp_info + ci;
-    for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
-	 dst_blk_y += compptr->v_samp_factor) {
-      dst_buffer = (*srcinfo->mem->access_virt_barray)
-	((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y,
-	 (JDIMENSION) compptr->v_samp_factor, TRUE);
-      for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
-	for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks;
-	     dst_blk_x += compptr->h_samp_factor) {
-	  src_buffer = (*srcinfo->mem->access_virt_barray)
-	    ((j_common_ptr) srcinfo, src_coef_arrays[ci], dst_blk_x,
-	     (JDIMENSION) compptr->h_samp_factor, FALSE);
-	  for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) {
-	    src_ptr = src_buffer[offset_x][dst_blk_y + offset_y];
-	    dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x];
-	    for (i = 0; i < DCTSIZE; i++)
-	      for (j = 0; j < DCTSIZE; j++)
-		dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
-	  }
-	}
-      }
-    }
-  }
-}
-
-
-LOCAL(void)
-do_rot_90 (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
-	   jvirt_barray_ptr *src_coef_arrays,
-	   jvirt_barray_ptr *dst_coef_arrays)
-/* 90 degree rotation is equivalent to
- *   1. Transposing the image;
- *   2. Horizontal mirroring.
- * These two steps are merged into a single processing routine.
- */
-{
-  JDIMENSION MCU_cols, comp_width, dst_blk_x, dst_blk_y;
-  int ci, i, j, offset_x, offset_y;
-  JBLOCKARRAY src_buffer, dst_buffer;
-  JCOEFPTR src_ptr, dst_ptr;
-  jpeg_component_info *compptr;
-
-  /* Because of the horizontal mirror step, we can't process partial iMCUs
-   * at the (output) right edge properly.  They just get transposed and
-   * not mirrored.
-   */
-  MCU_cols = dstinfo->image_width / (dstinfo->max_h_samp_factor * DCTSIZE);
-
-  for (ci = 0; ci < dstinfo->num_components; ci++) {
-    compptr = dstinfo->comp_info + ci;
-    comp_width = MCU_cols * compptr->h_samp_factor;
-    for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
-	 dst_blk_y += compptr->v_samp_factor) {
-      dst_buffer = (*srcinfo->mem->access_virt_barray)
-	((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y,
-	 (JDIMENSION) compptr->v_samp_factor, TRUE);
-      for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
-	for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks;
-	     dst_blk_x += compptr->h_samp_factor) {
-	  src_buffer = (*srcinfo->mem->access_virt_barray)
-	    ((j_common_ptr) srcinfo, src_coef_arrays[ci], dst_blk_x,
-	     (JDIMENSION) compptr->h_samp_factor, FALSE);
-	  for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) {
-	    src_ptr = src_buffer[offset_x][dst_blk_y + offset_y];
-	    if (dst_blk_x < comp_width) {
-	      /* Block is within the mirrorable area. */
-	      dst_ptr = dst_buffer[offset_y]
-		[comp_width - dst_blk_x - offset_x - 1];
-	      for (i = 0; i < DCTSIZE; i++) {
-		for (j = 0; j < DCTSIZE; j++)
-		  dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
-		i++;
-		for (j = 0; j < DCTSIZE; j++)
-		  dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j];
-	      }
-	    } else {
-	      /* Edge blocks are transposed but not mirrored. */
-	      dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x];
-	      for (i = 0; i < DCTSIZE; i++)
-		for (j = 0; j < DCTSIZE; j++)
-		  dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
-	    }
-	  }
-	}
-      }
-    }
-  }
-}
-
-
-LOCAL(void)
-do_rot_270 (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
-	    jvirt_barray_ptr *src_coef_arrays,
-	    jvirt_barray_ptr *dst_coef_arrays)
-/* 270 degree rotation is equivalent to
- *   1. Horizontal mirroring;
- *   2. Transposing the image.
- * These two steps are merged into a single processing routine.
- */
-{
-  JDIMENSION MCU_rows, comp_height, dst_blk_x, dst_blk_y;
-  int ci, i, j, offset_x, offset_y;
-  JBLOCKARRAY src_buffer, dst_buffer;
-  JCOEFPTR src_ptr, dst_ptr;
-  jpeg_component_info *compptr;
-
-  /* Because of the horizontal mirror step, we can't process partial iMCUs
-   * at the (output) bottom edge properly.  They just get transposed and
-   * not mirrored.
-   */
-  MCU_rows = dstinfo->image_height / (dstinfo->max_v_samp_factor * DCTSIZE);
-
-  for (ci = 0; ci < dstinfo->num_components; ci++) {
-    compptr = dstinfo->comp_info + ci;
-    comp_height = MCU_rows * compptr->v_samp_factor;
-    for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
-	 dst_blk_y += compptr->v_samp_factor) {
-      dst_buffer = (*srcinfo->mem->access_virt_barray)
-	((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y,
-	 (JDIMENSION) compptr->v_samp_factor, TRUE);
-      for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
-	for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks;
-	     dst_blk_x += compptr->h_samp_factor) {
-	  src_buffer = (*srcinfo->mem->access_virt_barray)
-	    ((j_common_ptr) srcinfo, src_coef_arrays[ci], dst_blk_x,
-	     (JDIMENSION) compptr->h_samp_factor, FALSE);
-	  for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) {
-	    dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x];
-	    if (dst_blk_y < comp_height) {
-	      /* Block is within the mirrorable area. */
-	      src_ptr = src_buffer[offset_x]
-		[comp_height - dst_blk_y - offset_y - 1];
-	      for (i = 0; i < DCTSIZE; i++) {
-		for (j = 0; j < DCTSIZE; j++) {
-		  dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
-		  j++;
-		  dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j];
-		}
-	      }
-	    } else {
-	      /* Edge blocks are transposed but not mirrored. */
-	      src_ptr = src_buffer[offset_x][dst_blk_y + offset_y];
-	      for (i = 0; i < DCTSIZE; i++)
-		for (j = 0; j < DCTSIZE; j++)
-		  dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
-	    }
-	  }
-	}
-      }
-    }
-  }
-}
-
-
-LOCAL(void)
-do_rot_180 (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
-	    jvirt_barray_ptr *src_coef_arrays,
-	    jvirt_barray_ptr *dst_coef_arrays)
-/* 180 degree rotation is equivalent to
- *   1. Vertical mirroring;
- *   2. Horizontal mirroring.
- * These two steps are merged into a single processing routine.
- */
-{
-  JDIMENSION MCU_cols, MCU_rows, comp_width, comp_height, dst_blk_x, dst_blk_y;
-  int ci, i, j, offset_y;
-  JBLOCKARRAY src_buffer, dst_buffer;
-  JBLOCKROW src_row_ptr, dst_row_ptr;
-  JCOEFPTR src_ptr, dst_ptr;
-  jpeg_component_info *compptr;
-
-  MCU_cols = dstinfo->image_width / (dstinfo->max_h_samp_factor * DCTSIZE);
-  MCU_rows = dstinfo->image_height / (dstinfo->max_v_samp_factor * DCTSIZE);
-
-  for (ci = 0; ci < dstinfo->num_components; ci++) {
-    compptr = dstinfo->comp_info + ci;
-    comp_width = MCU_cols * compptr->h_samp_factor;
-    comp_height = MCU_rows * compptr->v_samp_factor;
-    for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
-	 dst_blk_y += compptr->v_samp_factor) {
-      dst_buffer = (*srcinfo->mem->access_virt_barray)
-	((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y,
-	 (JDIMENSION) compptr->v_samp_factor, TRUE);
-      if (dst_blk_y < comp_height) {
-	/* Row is within the vertically mirrorable area. */
-	src_buffer = (*srcinfo->mem->access_virt_barray)
-	  ((j_common_ptr) srcinfo, src_coef_arrays[ci],
-	   comp_height - dst_blk_y - (JDIMENSION) compptr->v_samp_factor,
-	   (JDIMENSION) compptr->v_samp_factor, FALSE);
-      } else {
-	/* Bottom-edge rows are only mirrored horizontally. */
-	src_buffer = (*srcinfo->mem->access_virt_barray)
-	  ((j_common_ptr) srcinfo, src_coef_arrays[ci], dst_blk_y,
-	   (JDIMENSION) compptr->v_samp_factor, FALSE);
-      }
-      for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
-	if (dst_blk_y < comp_height) {
-	  /* Row is within the mirrorable area. */
-	  dst_row_ptr = dst_buffer[offset_y];
-	  src_row_ptr = src_buffer[compptr->v_samp_factor - offset_y - 1];
-	  /* Process the blocks that can be mirrored both ways. */
-	  for (dst_blk_x = 0; dst_blk_x < comp_width; dst_blk_x++) {
-	    dst_ptr = dst_row_ptr[dst_blk_x];
-	    src_ptr = src_row_ptr[comp_width - dst_blk_x - 1];
-	    for (i = 0; i < DCTSIZE; i += 2) {
-	      /* For even row, negate every odd column. */
-	      for (j = 0; j < DCTSIZE; j += 2) {
-		*dst_ptr++ = *src_ptr++;
-		*dst_ptr++ = - *src_ptr++;
-	      }
-	      /* For odd row, negate every even column. */
-	      for (j = 0; j < DCTSIZE; j += 2) {
-		*dst_ptr++ = - *src_ptr++;
-		*dst_ptr++ = *src_ptr++;
-	      }
-	    }
-	  }
-	  /* Any remaining right-edge blocks are only mirrored vertically. */
-	  for (; dst_blk_x < compptr->width_in_blocks; dst_blk_x++) {
-	    dst_ptr = dst_row_ptr[dst_blk_x];
-	    src_ptr = src_row_ptr[dst_blk_x];
-	    for (i = 0; i < DCTSIZE; i += 2) {
-	      for (j = 0; j < DCTSIZE; j++)
-		*dst_ptr++ = *src_ptr++;
-	      for (j = 0; j < DCTSIZE; j++)
-		*dst_ptr++ = - *src_ptr++;
-	    }
-	  }
-	} else {
-	  /* Remaining rows are just mirrored horizontally. */
-	  dst_row_ptr = dst_buffer[offset_y];
-	  src_row_ptr = src_buffer[offset_y];
-	  /* Process the blocks that can be mirrored. */
-	  for (dst_blk_x = 0; dst_blk_x < comp_width; dst_blk_x++) {
-	    dst_ptr = dst_row_ptr[dst_blk_x];
-	    src_ptr = src_row_ptr[comp_width - dst_blk_x - 1];
-	    for (i = 0; i < DCTSIZE2; i += 2) {
-	      *dst_ptr++ = *src_ptr++;
-	      *dst_ptr++ = - *src_ptr++;
-	    }
-	  }
-	  /* Any remaining right-edge blocks are only copied. */
-	  for (; dst_blk_x < compptr->width_in_blocks; dst_blk_x++) {
-	    dst_ptr = dst_row_ptr[dst_blk_x];
-	    src_ptr = src_row_ptr[dst_blk_x];
-	    for (i = 0; i < DCTSIZE2; i++)
-	      *dst_ptr++ = *src_ptr++;
-	  }
-	}
-      }
-    }
-  }
-}
-
-
-LOCAL(void)
-do_transverse (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
-	       jvirt_barray_ptr *src_coef_arrays,
-	       jvirt_barray_ptr *dst_coef_arrays)
-/* Transverse transpose is equivalent to
- *   1. 180 degree rotation;
- *   2. Transposition;
- * or
- *   1. Horizontal mirroring;
- *   2. Transposition;
- *   3. Horizontal mirroring.
- * These steps are merged into a single processing routine.
- */
-{
-  JDIMENSION MCU_cols, MCU_rows, comp_width, comp_height, dst_blk_x, dst_blk_y;
-  int ci, i, j, offset_x, offset_y;
-  JBLOCKARRAY src_buffer, dst_buffer;
-  JCOEFPTR src_ptr, dst_ptr;
-  jpeg_component_info *compptr;
-
-  MCU_cols = dstinfo->image_width / (dstinfo->max_h_samp_factor * DCTSIZE);
-  MCU_rows = dstinfo->image_height / (dstinfo->max_v_samp_factor * DCTSIZE);
-
-  for (ci = 0; ci < dstinfo->num_components; ci++) {
-    compptr = dstinfo->comp_info + ci;
-    comp_width = MCU_cols * compptr->h_samp_factor;
-    comp_height = MCU_rows * compptr->v_samp_factor;
-    for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
-	 dst_blk_y += compptr->v_samp_factor) {
-      dst_buffer = (*srcinfo->mem->access_virt_barray)
-	((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y,
-	 (JDIMENSION) compptr->v_samp_factor, TRUE);
-      for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
-	for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks;
-	     dst_blk_x += compptr->h_samp_factor) {
-	  src_buffer = (*srcinfo->mem->access_virt_barray)
-	    ((j_common_ptr) srcinfo, src_coef_arrays[ci], dst_blk_x,
-	     (JDIMENSION) compptr->h_samp_factor, FALSE);
-	  for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) {
-	    if (dst_blk_y < comp_height) {
-	      src_ptr = src_buffer[offset_x]
-		[comp_height - dst_blk_y - offset_y - 1];
-	      if (dst_blk_x < comp_width) {
-		/* Block is within the mirrorable area. */
-		dst_ptr = dst_buffer[offset_y]
-		  [comp_width - dst_blk_x - offset_x - 1];
-		for (i = 0; i < DCTSIZE; i++) {
-		  for (j = 0; j < DCTSIZE; j++) {
-		    dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
-		    j++;
-		    dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j];
-		  }
-		  i++;
-		  for (j = 0; j < DCTSIZE; j++) {
-		    dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j];
-		    j++;
-		    dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
-		  }
-		}
-	      } else {
-		/* Right-edge blocks are mirrored in y only */
-		dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x];
-		for (i = 0; i < DCTSIZE; i++) {
-		  for (j = 0; j < DCTSIZE; j++) {
-		    dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
-		    j++;
-		    dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j];
-		  }
-		}
-	      }
-	    } else {
-	      src_ptr = src_buffer[offset_x][dst_blk_y + offset_y];
-	      if (dst_blk_x < comp_width) {
-		/* Bottom-edge blocks are mirrored in x only */
-		dst_ptr = dst_buffer[offset_y]
-		  [comp_width - dst_blk_x - offset_x - 1];
-		for (i = 0; i < DCTSIZE; i++) {
-		  for (j = 0; j < DCTSIZE; j++)
-		    dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
-		  i++;
-		  for (j = 0; j < DCTSIZE; j++)
-		    dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j];
-		}
-	      } else {
-		/* At lower right corner, just transpose, no mirroring */
-		dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x];
-		for (i = 0; i < DCTSIZE; i++)
-		  for (j = 0; j < DCTSIZE; j++)
-		    dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
-	      }
-	    }
-	  }
-	}
-      }
-    }
-  }
-}
-
-
-/* Request any required workspace.
- *
- * We allocate the workspace virtual arrays from the source decompression
- * object, so that all the arrays (both the original data and the workspace)
- * will be taken into account while making memory management decisions.
- * Hence, this routine must be called after jpeg_read_header (which reads
- * the image dimensions) and before jpeg_read_coefficients (which realizes
- * the source's virtual arrays).
- */
-
-GLOBAL(void)
-jtransform_request_workspace (j_decompress_ptr srcinfo,
-			      jpeg_transform_info *info)
-{
-  jvirt_barray_ptr *coef_arrays = NULL;
-  jpeg_component_info *compptr;
-  int ci;
-
-  if (info->force_grayscale &&
-      srcinfo->jpeg_color_space == JCS_YCbCr &&
-      srcinfo->num_components == 3) {
-    /* We'll only process the first component */
-    info->num_components = 1;
-  } else {
-    /* Process all the components */
-    info->num_components = srcinfo->num_components;
-  }
-
-  switch (info->transform) {
-  case JXFORM_NONE:
-  case JXFORM_FLIP_H:
-    /* Don't need a workspace array */
-    break;
-  case JXFORM_FLIP_V:
-  case JXFORM_ROT_180:
-    /* Need workspace arrays having same dimensions as source image.
-     * Note that we allocate arrays padded out to the next iMCU boundary,
-     * so that transform routines need not worry about missing edge blocks.
-     */
-    coef_arrays = (jvirt_barray_ptr *)
-      (*srcinfo->mem->alloc_small) ((j_common_ptr) srcinfo, JPOOL_IMAGE,
-	SIZEOF(jvirt_barray_ptr) * info->num_components);
-    for (ci = 0; ci < info->num_components; ci++) {
-      compptr = srcinfo->comp_info + ci;
-      coef_arrays[ci] = (*srcinfo->mem->request_virt_barray)
-	((j_common_ptr) srcinfo, JPOOL_IMAGE, FALSE,
-	 (JDIMENSION) jround_up((long) compptr->width_in_blocks,
-				(long) compptr->h_samp_factor),
-	 (JDIMENSION) jround_up((long) compptr->height_in_blocks,
-				(long) compptr->v_samp_factor),
-	 (JDIMENSION) compptr->v_samp_factor);
-    }
-    break;
-  case JXFORM_TRANSPOSE:
-  case JXFORM_TRANSVERSE:
-  case JXFORM_ROT_90:
-  case JXFORM_ROT_270:
-    /* Need workspace arrays having transposed dimensions.
-     * Note that we allocate arrays padded out to the next iMCU boundary,
-     * so that transform routines need not worry about missing edge blocks.
-     */
-    coef_arrays = (jvirt_barray_ptr *)
-      (*srcinfo->mem->alloc_small) ((j_common_ptr) srcinfo, JPOOL_IMAGE,
-	SIZEOF(jvirt_barray_ptr) * info->num_components);
-    for (ci = 0; ci < info->num_components; ci++) {
-      compptr = srcinfo->comp_info + ci;
-      coef_arrays[ci] = (*srcinfo->mem->request_virt_barray)
-	((j_common_ptr) srcinfo, JPOOL_IMAGE, FALSE,
-	 (JDIMENSION) jround_up((long) compptr->height_in_blocks,
-				(long) compptr->v_samp_factor),
-	 (JDIMENSION) jround_up((long) compptr->width_in_blocks,
-				(long) compptr->h_samp_factor),
-	 (JDIMENSION) compptr->h_samp_factor);
-    }
-    break;
-  }
-  info->workspace_coef_arrays = coef_arrays;
-}
-
-
-/* Transpose destination image parameters */
-
-LOCAL(void)
-transpose_critical_parameters (j_compress_ptr dstinfo)
-{
-  int tblno, i, j, ci, itemp;
-  jpeg_component_info *compptr;
-  JQUANT_TBL *qtblptr;
-  JDIMENSION dtemp;
-  UINT16 qtemp;
-
-  /* Transpose basic image dimensions */
-  dtemp = dstinfo->image_width;
-  dstinfo->image_width = dstinfo->image_height;
-  dstinfo->image_height = dtemp;
-
-  /* Transpose sampling factors */
-  for (ci = 0; ci < dstinfo->num_components; ci++) {
-    compptr = dstinfo->comp_info + ci;
-    itemp = compptr->h_samp_factor;
-    compptr->h_samp_factor = compptr->v_samp_factor;
-    compptr->v_samp_factor = itemp;
-  }
-
-  /* Transpose quantization tables */
-  for (tblno = 0; tblno < NUM_QUANT_TBLS; tblno++) {
-    qtblptr = dstinfo->quant_tbl_ptrs[tblno];
-    if (qtblptr != NULL) {
-      for (i = 0; i < DCTSIZE; i++) {
-	for (j = 0; j < i; j++) {
-	  qtemp = qtblptr->quantval[i*DCTSIZE+j];
-	  qtblptr->quantval[i*DCTSIZE+j] = qtblptr->quantval[j*DCTSIZE+i];
-	  qtblptr->quantval[j*DCTSIZE+i] = qtemp;
-	}
-      }
-    }
-  }
-}
-
-
-/* Trim off any partial iMCUs on the indicated destination edge */
-
-LOCAL(void)
-trim_right_edge (j_compress_ptr dstinfo)
-{
-  int ci, max_h_samp_factor;
-  JDIMENSION MCU_cols;
-
-  /* We have to compute max_h_samp_factor ourselves,
-   * because it hasn't been set yet in the destination
-   * (and we don't want to use the source's value).
-   */
-  max_h_samp_factor = 1;
-  for (ci = 0; ci < dstinfo->num_components; ci++) {
-    int h_samp_factor = dstinfo->comp_info[ci].h_samp_factor;
-    max_h_samp_factor = MAX(max_h_samp_factor, h_samp_factor);
-  }
-  MCU_cols = dstinfo->image_width / (max_h_samp_factor * DCTSIZE);
-  if (MCU_cols > 0)		/* can't trim to 0 pixels */
-    dstinfo->image_width = MCU_cols * (max_h_samp_factor * DCTSIZE);
-}
-
-LOCAL(void)
-trim_bottom_edge (j_compress_ptr dstinfo)
-{
-  int ci, max_v_samp_factor;
-  JDIMENSION MCU_rows;
-
-  /* We have to compute max_v_samp_factor ourselves,
-   * because it hasn't been set yet in the destination
-   * (and we don't want to use the source's value).
-   */
-  max_v_samp_factor = 1;
-  for (ci = 0; ci < dstinfo->num_components; ci++) {
-    int v_samp_factor = dstinfo->comp_info[ci].v_samp_factor;
-    max_v_samp_factor = MAX(max_v_samp_factor, v_samp_factor);
-  }
-  MCU_rows = dstinfo->image_height / (max_v_samp_factor * DCTSIZE);
-  if (MCU_rows > 0)		/* can't trim to 0 pixels */
-    dstinfo->image_height = MCU_rows * (max_v_samp_factor * DCTSIZE);
-}
-
-
-/* Adjust output image parameters as needed.
- *
- * This must be called after jpeg_copy_critical_parameters()
- * and before jpeg_write_coefficients().
- *
- * The return value is the set of virtual coefficient arrays to be written
- * (either the ones allocated by jtransform_request_workspace, or the
- * original source data arrays).  The caller will need to pass this value
- * to jpeg_write_coefficients().
- */
-
-GLOBAL(jvirt_barray_ptr *)
-jtransform_adjust_parameters (j_decompress_ptr srcinfo,
-			      j_compress_ptr dstinfo,
-			      jvirt_barray_ptr *src_coef_arrays,
-			      jpeg_transform_info *info)
-{
-  /* If force-to-grayscale is requested, adjust destination parameters */
-  if (info->force_grayscale) {
-    /* We use jpeg_set_colorspace to make sure subsidiary settings get fixed
-     * properly.  Among other things, the target h_samp_factor & v_samp_factor
-     * will get set to 1, which typically won't match the source.
-     * In fact we do this even if the source is already grayscale; that
-     * provides an easy way of coercing a grayscale JPEG with funny sampling
-     * factors to the customary 1,1.  (Some decoders fail on other factors.)
-     */
-    if ((dstinfo->jpeg_color_space == JCS_YCbCr &&
-	 dstinfo->num_components == 3) ||
-	(dstinfo->jpeg_color_space == JCS_GRAYSCALE &&
-	 dstinfo->num_components == 1)) {
-      /* We have to preserve the source's quantization table number. */
-      int sv_quant_tbl_no = dstinfo->comp_info[0].quant_tbl_no;
-      jpeg_set_colorspace(dstinfo, JCS_GRAYSCALE);
-      dstinfo->comp_info[0].quant_tbl_no = sv_quant_tbl_no;
-    } else {
-      /* Sorry, can't do it */
-      ERREXIT(dstinfo, JERR_CONVERSION_NOTIMPL);
-    }
-  }
-
-  /* Correct the destination's image dimensions etc if necessary */
-  switch (info->transform) {
-  case JXFORM_NONE:
-    /* Nothing to do */
-    break;
-  case JXFORM_FLIP_H:
-    if (info->trim)
-      trim_right_edge(dstinfo);
-    break;
-  case JXFORM_FLIP_V:
-    if (info->trim)
-      trim_bottom_edge(dstinfo);
-    break;
-  case JXFORM_TRANSPOSE:
-    transpose_critical_parameters(dstinfo);
-    /* transpose does NOT have to trim anything */
-    break;
-  case JXFORM_TRANSVERSE:
-    transpose_critical_parameters(dstinfo);
-    if (info->trim) {
-      trim_right_edge(dstinfo);
-      trim_bottom_edge(dstinfo);
-    }
-    break;
-  case JXFORM_ROT_90:
-    transpose_critical_parameters(dstinfo);
-    if (info->trim)
-      trim_right_edge(dstinfo);
-    break;
-  case JXFORM_ROT_180:
-    if (info->trim) {
-      trim_right_edge(dstinfo);
-      trim_bottom_edge(dstinfo);
-    }
-    break;
-  case JXFORM_ROT_270:
-    transpose_critical_parameters(dstinfo);
-    if (info->trim)
-      trim_bottom_edge(dstinfo);
-    break;
-  }
-
-  /* Return the appropriate output data set */
-  if (info->workspace_coef_arrays != NULL)
-    return info->workspace_coef_arrays;
-  return src_coef_arrays;
-}
-
-
-/* Execute the actual transformation, if any.
- *
- * This must be called *after* jpeg_write_coefficients, because it depends
- * on jpeg_write_coefficients to have computed subsidiary values such as
- * the per-component width and height fields in the destination object.
- *
- * Note that some transformations will modify the source data arrays!
- */
-
-GLOBAL(void)
-jtransform_execute_transformation (j_decompress_ptr srcinfo,
-				   j_compress_ptr dstinfo,
-				   jvirt_barray_ptr *src_coef_arrays,
-				   jpeg_transform_info *info)
-{
-  jvirt_barray_ptr *dst_coef_arrays = info->workspace_coef_arrays;
-
-  switch (info->transform) {
-  case JXFORM_NONE:
-    break;
-  case JXFORM_FLIP_H:
-    do_flip_h(srcinfo, dstinfo, src_coef_arrays);
-    break;
-  case JXFORM_FLIP_V:
-    do_flip_v(srcinfo, dstinfo, src_coef_arrays, dst_coef_arrays);
-    break;
-  case JXFORM_TRANSPOSE:
-    do_transpose(srcinfo, dstinfo, src_coef_arrays, dst_coef_arrays);
-    break;
-  case JXFORM_TRANSVERSE:
-    do_transverse(srcinfo, dstinfo, src_coef_arrays, dst_coef_arrays);
-    break;
-  case JXFORM_ROT_90:
-    do_rot_90(srcinfo, dstinfo, src_coef_arrays, dst_coef_arrays);
-    break;
-  case JXFORM_ROT_180:
-    do_rot_180(srcinfo, dstinfo, src_coef_arrays, dst_coef_arrays);
-    break;
-  case JXFORM_ROT_270:
-    do_rot_270(srcinfo, dstinfo, src_coef_arrays, dst_coef_arrays);
-    break;
-  }
-}
-
-#endif /* TRANSFORMS_SUPPORTED */
-
-
-/* Setup decompression object to save desired markers in memory.
- * This must be called before jpeg_read_header() to have the desired effect.
- */
-
-GLOBAL(void)
-jcopy_markers_setup (j_decompress_ptr srcinfo, JCOPY_OPTION option)
-{
-#ifdef SAVE_MARKERS_SUPPORTED
-  int m;
-
-  /* Save comments except under NONE option */
-  if (option != JCOPYOPT_NONE) {
-    jpeg_save_markers(srcinfo, JPEG_COM, 0xFFFF);
-  }
-  /* Save all types of APPn markers iff ALL option */
-  if (option == JCOPYOPT_ALL) {
-    for (m = 0; m < 16; m++)
-      jpeg_save_markers(srcinfo, JPEG_APP0 + m, 0xFFFF);
-  }
-#endif /* SAVE_MARKERS_SUPPORTED */
-}
-
-/* Copy markers saved in the given source object to the destination object.
- * This should be called just after jpeg_start_compress() or
- * jpeg_write_coefficients().
- * Note that those routines will have written the SOI, and also the
- * JFIF APP0 or Adobe APP14 markers if selected.
- */
-
-GLOBAL(void)
-jcopy_markers_execute (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
-		       JCOPY_OPTION option)
-{
-  jpeg_saved_marker_ptr marker;
-
-  /* In the current implementation, we don't actually need to examine the
-   * option flag here; we just copy everything that got saved.
-   * But to avoid confusion, we do not output JFIF and Adobe APP14 markers
-   * if the encoder library already wrote one.
-   */
-  for (marker = srcinfo->marker_list; marker != NULL; marker = marker->next) {
-    if (dstinfo->write_JFIF_header &&
-	marker->marker == JPEG_APP0 &&
-	marker->data_length >= 5 &&
-	GETJOCTET(marker->data[0]) == 0x4A &&
-	GETJOCTET(marker->data[1]) == 0x46 &&
-	GETJOCTET(marker->data[2]) == 0x49 &&
-	GETJOCTET(marker->data[3]) == 0x46 &&
-	GETJOCTET(marker->data[4]) == 0)
-      continue;			/* reject duplicate JFIF */
-    if (dstinfo->write_Adobe_marker &&
-	marker->marker == JPEG_APP0+14 &&
-	marker->data_length >= 5 &&
-	GETJOCTET(marker->data[0]) == 0x41 &&
-	GETJOCTET(marker->data[1]) == 0x64 &&
-	GETJOCTET(marker->data[2]) == 0x6F &&
-	GETJOCTET(marker->data[3]) == 0x62 &&
-	GETJOCTET(marker->data[4]) == 0x65)
-      continue;			/* reject duplicate Adobe */
-#ifdef NEED_FAR_POINTERS
-    /* We could use jpeg_write_marker if the data weren't FAR... */
-    {
-      unsigned int i;
-      jpeg_write_m_header(dstinfo, marker->marker, marker->data_length);
-      for (i = 0; i < marker->data_length; i++)
-	jpeg_write_m_byte(dstinfo, marker->data[i]);
-    }
-#else
-    jpeg_write_marker(dstinfo, marker->marker,
-		      marker->data, marker->data_length);
-#endif
-  }
-}

Engine/lib/ljpeg/extras/transupp.h

@@ -1,135 +0,0 @@
-/*
- * transupp.h
- *
- * Copyright (C) 1997, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains declarations for image transformation routines and
- * other utility code used by the jpegtran sample application.  These are
- * NOT part of the core JPEG library.  But we keep these routines separate
- * from jpegtran.c to ease the task of maintaining jpegtran-like programs
- * that have other user interfaces.
- *
- * NOTE: all the routines declared here have very specific requirements
- * about when they are to be executed during the reading and writing of the
- * source and destination files.  See the comments in transupp.c, or see
- * jpegtran.c for an example of correct usage.
- */
-
-/* If you happen not to want the image transform support, disable it here */
-#ifndef TRANSFORMS_SUPPORTED
-#define TRANSFORMS_SUPPORTED 1		/* 0 disables transform code */
-#endif
-
-/* Short forms of external names for systems with brain-damaged linkers. */
-
-#ifdef NEED_SHORT_EXTERNAL_NAMES
-#define jtransform_request_workspace		jTrRequest
-#define jtransform_adjust_parameters		jTrAdjust
-#define jtransform_execute_transformation	jTrExec
-#define jcopy_markers_setup			jCMrkSetup
-#define jcopy_markers_execute			jCMrkExec
-#endif /* NEED_SHORT_EXTERNAL_NAMES */
-
-
-/*
- * Codes for supported types of image transformations.
- */
-
-typedef enum {
-	JXFORM_NONE,		/* no transformation */
-	JXFORM_FLIP_H,		/* horizontal flip */
-	JXFORM_FLIP_V,		/* vertical flip */
-	JXFORM_TRANSPOSE,	/* transpose across UL-to-LR axis */
-	JXFORM_TRANSVERSE,	/* transpose across UR-to-LL axis */
-	JXFORM_ROT_90,		/* 90-degree clockwise rotation */
-	JXFORM_ROT_180,		/* 180-degree rotation */
-	JXFORM_ROT_270		/* 270-degree clockwise (or 90 ccw) */
-} JXFORM_CODE;
-
-/*
- * Although rotating and flipping data expressed as DCT coefficients is not
- * hard, there is an asymmetry in the JPEG format specification for images
- * whose dimensions aren't multiples of the iMCU size.  The right and bottom
- * image edges are padded out to the next iMCU boundary with junk data; but
- * no padding is possible at the top and left edges.  If we were to flip
- * the whole image including the pad data, then pad garbage would become
- * visible at the top and/or left, and real pixels would disappear into the
- * pad margins --- perhaps permanently, since encoders & decoders may not
- * bother to preserve DCT blocks that appear to be completely outside the
- * nominal image area.  So, we have to exclude any partial iMCUs from the
- * basic transformation.
- *
- * Transpose is the only transformation that can handle partial iMCUs at the
- * right and bottom edges completely cleanly.  flip_h can flip partial iMCUs
- * at the bottom, but leaves any partial iMCUs at the right edge untouched.
- * Similarly flip_v leaves any partial iMCUs at the bottom edge untouched.
- * The other transforms are defined as combinations of these basic transforms
- * and process edge blocks in a way that preserves the equivalence.
- *
- * The "trim" option causes untransformable partial iMCUs to be dropped;
- * this is not strictly lossless, but it usually gives the best-looking
- * result for odd-size images.  Note that when this option is active,
- * the expected mathematical equivalences between the transforms may not hold.
- * (For example, -rot 270 -trim trims only the bottom edge, but -rot 90 -trim
- * followed by -rot 180 -trim trims both edges.)
- *
- * We also offer a "force to grayscale" option, which simply discards the
- * chrominance channels of a YCbCr image.  This is lossless in the sense that
- * the luminance channel is preserved exactly.  It's not the same kind of
- * thing as the rotate/flip transformations, but it's convenient to handle it
- * as part of this package, mainly because the transformation routines have to
- * be aware of the option to know how many components to work on.
- */
-
-typedef struct {
-  /* Options: set by caller */
-  JXFORM_CODE transform;	/* image transform operator */
-  boolean trim;			/* if TRUE, trim partial MCUs as needed */
-  boolean force_grayscale;	/* if TRUE, convert color image to grayscale */
-
-  /* Internal workspace: caller should not touch these */
-  int num_components;		/* # of components in workspace */
-  jvirt_barray_ptr * workspace_coef_arrays; /* workspace for transformations */
-} jpeg_transform_info;
-
-
-#if TRANSFORMS_SUPPORTED
-
-/* Request any required workspace */
-EXTERN(void) jtransform_request_workspace
-	JPP((j_decompress_ptr srcinfo, jpeg_transform_info *info));
-/* Adjust output image parameters */
-EXTERN(jvirt_barray_ptr *) jtransform_adjust_parameters
-	JPP((j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
-	     jvirt_barray_ptr *src_coef_arrays,
-	     jpeg_transform_info *info));
-/* Execute the actual transformation, if any */
-EXTERN(void) jtransform_execute_transformation
-	JPP((j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
-	     jvirt_barray_ptr *src_coef_arrays,
-	     jpeg_transform_info *info));
-
-#endif /* TRANSFORMS_SUPPORTED */
-
-
-/*
- * Support for copying optional markers from source to destination file.
- */
-
-typedef enum {
-	JCOPYOPT_NONE,		/* copy no optional markers */
-	JCOPYOPT_COMMENTS,	/* copy only comment (COM) markers */
-	JCOPYOPT_ALL		/* copy all optional markers */
-} JCOPY_OPTION;
-
-#define JCOPYOPT_DEFAULT  JCOPYOPT_COMMENTS	/* recommended default */
-
-/* Setup decompression object to save desired markers in memory */
-EXTERN(void) jcopy_markers_setup
-	JPP((j_decompress_ptr srcinfo, JCOPY_OPTION option));
-/* Copy markers saved in the given source object to the destination object */
-EXTERN(void) jcopy_markers_execute
-	JPP((j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
-	     JCOPY_OPTION option));

Engine/lib/ljpeg/extras/usage.doc

@@ -1,562 +0,0 @@
-USAGE instructions for the Independent JPEG Group's JPEG software
-=================================================================
-
-This file describes usage of the JPEG conversion programs cjpeg and djpeg,
-as well as the utility programs jpegtran, rdjpgcom and wrjpgcom.  (See
-the other documentation files if you wish to use the JPEG library within
-your own programs.)
-
-If you are on a Unix machine you may prefer to read the Unix-style manual
-pages in files cjpeg.1, djpeg.1, jpegtran.1, rdjpgcom.1, wrjpgcom.1.
-
-
-INTRODUCTION
-
-These programs implement JPEG image compression and decompression.  JPEG
-(pronounced "jay-peg") is a standardized compression method for full-color
-and gray-scale images.  JPEG is designed to handle "real-world" scenes,
-for example scanned photographs.  Cartoons, line drawings, and other
-non-realistic images are not JPEG's strong suit; on that sort of material
-you may get poor image quality and/or little compression.
-
-JPEG is lossy, meaning that the output image is not necessarily identical to
-the input image.  Hence you should not use JPEG if you have to have identical
-output bits.  However, on typical real-world images, very good compression
-levels can be obtained with no visible change, and amazingly high compression
-is possible if you can tolerate a low-quality image.  You can trade off image
-quality against file size by adjusting the compressor's "quality" setting.
-
-
-GENERAL USAGE
-
-We provide two programs, cjpeg to compress an image file into JPEG format,
-and djpeg to decompress a JPEG file back into a conventional image format.
-
-On Unix-like systems, you say:
-	cjpeg [switches] [imagefile] >jpegfile
-or
-	djpeg [switches] [jpegfile]  >imagefile
-The programs read the specified input file, or standard input if none is
-named.  They always write to standard output (with trace/error messages to
-standard error).  These conventions are handy for piping images between
-programs.
-
-On most non-Unix systems, you say:
-	cjpeg [switches] imagefile jpegfile
-or
-	djpeg [switches] jpegfile  imagefile
-i.e., both the input and output files are named on the command line.  This
-style is a little more foolproof, and it loses no functionality if you don't
-have pipes.  (You can get this style on Unix too, if you prefer, by defining
-TWO_FILE_COMMANDLINE when you compile the programs; see install.doc.)
-
-You can also say:
-	cjpeg [switches] -outfile jpegfile  imagefile
-or
-	djpeg [switches] -outfile imagefile  jpegfile
-This syntax works on all systems, so it is useful for scripts.
-
-The currently supported image file formats are: PPM (PBMPLUS color format),
-PGM (PBMPLUS gray-scale format), BMP, Targa, and RLE (Utah Raster Toolkit
-format).  (RLE is supported only if the URT library is available.)
-cjpeg recognizes the input image format automatically, with the exception
-of some Targa-format files.  You have to tell djpeg which format to generate.
-
-JPEG files are in the defacto standard JFIF file format.  There are other,
-less widely used JPEG-based file formats, but we don't support them.
-
-All switch names may be abbreviated; for example, -grayscale may be written
--gray or -gr.  Most of the "basic" switches can be abbreviated to as little as
-one letter.  Upper and lower case are equivalent (-BMP is the same as -bmp).
-British spellings are also accepted (e.g., -greyscale), though for brevity
-these are not mentioned below.
-
-
-CJPEG DETAILS
-
-The basic command line switches for cjpeg are:
-
-	-quality N	Scale quantization tables to adjust image quality.
-			Quality is 0 (worst) to 100 (best); default is 75.
-			(See below for more info.)
-
-	-grayscale	Create monochrome JPEG file from color input.
-			Be sure to use this switch when compressing a grayscale
-			BMP file, because cjpeg isn't bright enough to notice
-			whether a BMP file uses only shades of gray.  By
-			saying -grayscale, you'll get a smaller JPEG file that
-			takes less time to process.
-
-	-optimize	Perform optimization of entropy encoding parameters.
-			Without this, default encoding parameters are used.
-			-optimize usually makes the JPEG file a little smaller,
-			but cjpeg runs somewhat slower and needs much more
-			memory.  Image quality and speed of decompression are
-			unaffected by -optimize.
-
-	-progressive	Create progressive JPEG file (see below).
-
-	-targa		Input file is Targa format.  Targa files that contain
-			an "identification" field will not be automatically
-			recognized by cjpeg; for such files you must specify
-			-targa to make cjpeg treat the input as Targa format.
-			For most Targa files, you won't need this switch.
-
-The -quality switch lets you trade off compressed file size against quality of
-the reconstructed image: the higher the quality setting, the larger the JPEG
-file, and the closer the output image will be to the original input.  Normally
-you want to use the lowest quality setting (smallest file) that decompresses
-into something visually indistinguishable from the original image.  For this
-purpose the quality setting should be between 50 and 95; the default of 75 is
-often about right.  If you see defects at -quality 75, then go up 5 or 10
-counts at a time until you are happy with the output image.  (The optimal
-setting will vary from one image to another.)
-
--quality 100 will generate a quantization table of all 1's, minimizing loss
-in the quantization step (but there is still information loss in subsampling,
-as well as roundoff error).  This setting is mainly of interest for
-experimental purposes.  Quality values above about 95 are NOT recommended for
-normal use; the compressed file size goes up dramatically for hardly any gain
-in output image quality.
-
-In the other direction, quality values below 50 will produce very small files
-of low image quality.  Settings around 5 to 10 might be useful in preparing an
-index of a large image library, for example.  Try -quality 2 (or so) for some
-amusing Cubist effects.  (Note: quality values below about 25 generate 2-byte
-quantization tables, which are considered optional in the JPEG standard.
-cjpeg emits a warning message when you give such a quality value, because some
-other JPEG programs may be unable to decode the resulting file.  Use -baseline
-if you need to ensure compatibility at low quality values.)
-
-The -progressive switch creates a "progressive JPEG" file.  In this type of
-JPEG file, the data is stored in multiple scans of increasing quality.  If the
-file is being transmitted over a slow communications link, the decoder can use
-the first scan to display a low-quality image very quickly, and can then
-improve the display with each subsequent scan.  The final image is exactly
-equivalent to a standard JPEG file of the same quality setting, and the total
-file size is about the same --- often a little smaller.  CAUTION: progressive
-JPEG is not yet widely implemented, so many decoders will be unable to view a
-progressive JPEG file at all.
-
-Switches for advanced users:
-
-	-dct int	Use integer DCT method (default).
-	-dct fast	Use fast integer DCT (less accurate).
-	-dct float	Use floating-point DCT method.
-			The float method is very slightly more accurate than
-			the int method, but is much slower unless your machine
-			has very fast floating-point hardware.  Also note that
-			results of the floating-point method may vary slightly
-			across machines, while the integer methods should give
-			the same results everywhere.  The fast integer method
-			is much less accurate than the other two.
-
-	-restart N	Emit a JPEG restart marker every N MCU rows, or every
-			N MCU blocks if "B" is attached to the number.
-			-restart 0 (the default) means no restart markers.
-
-	-smooth N	Smooth the input image to eliminate dithering noise.
-			N, ranging from 1 to 100, indicates the strength of
-			smoothing.  0 (the default) means no smoothing.
-
-	-maxmemory N	Set limit for amount of memory to use in processing
-			large images.  Value is in thousands of bytes, or
-			millions of bytes if "M" is attached to the number.
-			For example, -max 4m selects 4000000 bytes.  If more
-			space is needed, temporary files will be used.
-
-	-verbose	Enable debug printout.  More -v's give more printout.
-	or  -debug	Also, version information is printed at startup.
-
-The -restart option inserts extra markers that allow a JPEG decoder to
-resynchronize after a transmission error.  Without restart markers, any damage
-to a compressed file will usually ruin the image from the point of the error
-to the end of the image; with restart markers, the damage is usually confined
-to the portion of the image up to the next restart marker.  Of course, the
-restart markers occupy extra space.  We recommend -restart 1 for images that
-will be transmitted across unreliable networks such as Usenet.
-
-The -smooth option filters the input to eliminate fine-scale noise.  This is
-often useful when converting dithered images to JPEG: a moderate smoothing
-factor of 10 to 50 gets rid of dithering patterns in the input file, resulting
-in a smaller JPEG file and a better-looking image.  Too large a smoothing
-factor will visibly blur the image, however.
-
-Switches for wizards:
-
-	-baseline	Force baseline-compatible quantization tables to be
-			generated.  This clamps quantization values to 8 bits
-			even at low quality settings.  (This switch is poorly
-			named, since it does not ensure that the output is
-			actually baseline JPEG.  For example, you can use
-			-baseline and -progressive together.)
-
-	-qtables file	Use the quantization tables given in the specified
-			text file.
-
-	-qslots N[,...] Select which quantization table to use for each color
-			component.
-
-	-sample HxV[,...]  Set JPEG sampling factors for each color component.
-
-	-scans file	Use the scan script given in the specified text file.
-
-The "wizard" switches are intended for experimentation with JPEG.  If you
-don't know what you are doing, DON'T USE THEM.  These switches are documented
-further in the file wizard.doc.
-
-
-DJPEG DETAILS
-
-The basic command line switches for djpeg are:
-
-	-colors N	Reduce image to at most N colors.  This reduces the
-	or -quantize N	number of colors used in the output image, so that it
-			can be displayed on a colormapped display or stored in
-			a colormapped file format.  For example, if you have
-			an 8-bit display, you'd need to reduce to 256 or fewer
-			colors.  (-colors is the recommended name, -quantize
-			is provided only for backwards compatibility.)
-
-	-fast		Select recommended processing options for fast, low
-			quality output.  (The default options are chosen for
-			highest quality output.)  Currently, this is equivalent
-			to "-dct fast -nosmooth -onepass -dither ordered".
-
-	-grayscale	Force gray-scale output even if JPEG file is color.
-			Useful for viewing on monochrome displays; also,
-			djpeg runs noticeably faster in this mode.
-
-	-scale M/N	Scale the output image by a factor M/N.  Currently
-			the scale factor must be 1/1, 1/2, 1/4, or 1/8.
-			Scaling is handy if the image is larger than your
-			screen; also, djpeg runs much faster when scaling
-			down the output.
-
-	-bmp		Select BMP output format (Windows flavor).  8-bit
-			colormapped format is emitted if -colors or -grayscale
-			is specified, or if the JPEG file is gray-scale;
-			otherwise, 24-bit full-color format is emitted.
-
-	-gif		Select GIF output format.  Since GIF does not support
-			more than 256 colors, -colors 256 is assumed (unless
-			you specify a smaller number of colors).  If you
-			specify -fast, the default number of colors is 216.
-
-	-os2		Select BMP output format (OS/2 1.x flavor).  8-bit
-			colormapped format is emitted if -colors or -grayscale
-			is specified, or if the JPEG file is gray-scale;
-			otherwise, 24-bit full-color format is emitted.
-
-	-pnm		Select PBMPLUS (PPM/PGM) output format (this is the
-			default format).  PGM is emitted if the JPEG file is
-			gray-scale or if -grayscale is specified; otherwise
-			PPM is emitted.
-
-	-rle		Select RLE output format.  (Requires URT library.)
-
-	-targa		Select Targa output format.  Gray-scale format is
-			emitted if the JPEG file is gray-scale or if
-			-grayscale is specified; otherwise, colormapped format
-			is emitted if -colors is specified; otherwise, 24-bit
-			full-color format is emitted.
-
-Switches for advanced users:
-
-	-dct int	Use integer DCT method (default).
-	-dct fast	Use fast integer DCT (less accurate).
-	-dct float	Use floating-point DCT method.
-			The float method is very slightly more accurate than
-			the int method, but is much slower unless your machine
-			has very fast floating-point hardware.  Also note that
-			results of the floating-point method may vary slightly
-			across machines, while the integer methods should give
-			the same results everywhere.  The fast integer method
-			is much less accurate than the other two.
-
-	-dither fs	Use Floyd-Steinberg dithering in color quantization.
-	-dither ordered	Use ordered dithering in color quantization.
-	-dither none	Do not use dithering in color quantization.
-			By default, Floyd-Steinberg dithering is applied when
-			quantizing colors; this is slow but usually produces
-			the best results.  Ordered dither is a compromise
-			between speed and quality; no dithering is fast but
-			usually looks awful.  Note that these switches have
-			no effect unless color quantization is being done.
-			Ordered dither is only available in -onepass mode.
-
-	-map FILE	Quantize to the colors used in the specified image
-			file.  This is useful for producing multiple files
-			with identical color maps, or for forcing a predefined
-			set of colors to be used.  The FILE must be a GIF
-			or PPM file.  This option overrides -colors and
-			-onepass.
-
-	-nosmooth	Use a faster, lower-quality upsampling routine.
-
-	-onepass	Use one-pass instead of two-pass color quantization.
-			The one-pass method is faster and needs less memory,
-			but it produces a lower-quality image.  -onepass is
-			ignored unless you also say -colors N.  Also,
-			the one-pass method is always used for gray-scale
-			output (the two-pass method is no improvement then).
-
-	-maxmemory N	Set limit for amount of memory to use in processing
-			large images.  Value is in thousands of bytes, or
-			millions of bytes if "M" is attached to the number.
-			For example, -max 4m selects 4000000 bytes.  If more
-			space is needed, temporary files will be used.
-
-	-verbose	Enable debug printout.  More -v's give more printout.
-	or  -debug	Also, version information is printed at startup.
-
-
-HINTS FOR CJPEG
-
-Color GIF files are not the ideal input for JPEG; JPEG is really intended for
-compressing full-color (24-bit) images.  In particular, don't try to convert
-cartoons, line drawings, and other images that have only a few distinct
-colors.  GIF works great on these, JPEG does not.  If you want to convert a
-GIF to JPEG, you should experiment with cjpeg's -quality and -smooth options
-to get a satisfactory conversion.  -smooth 10 or so is often helpful.
-
-Avoid running an image through a series of JPEG compression/decompression
-cycles.  Image quality loss will accumulate; after ten or so cycles the image
-may be noticeably worse than it was after one cycle.  It's best to use a
-lossless format while manipulating an image, then convert to JPEG format when
-you are ready to file the image away.
-
-The -optimize option to cjpeg is worth using when you are making a "final"
-version for posting or archiving.  It's also a win when you are using low
-quality settings to make very small JPEG files; the percentage improvement
-is often a lot more than it is on larger files.  (At present, -optimize
-mode is always selected when generating progressive JPEG files.)
-
-GIF input files are no longer supported, to avoid the Unisys LZW patent.
-Use a Unisys-licensed program if you need to read a GIF file.  (Conversion
-of GIF files to JPEG is usually a bad idea anyway.)
-
-
-HINTS FOR DJPEG
-
-To get a quick preview of an image, use the -grayscale and/or -scale switches.
-"-grayscale -scale 1/8" is the fastest case.
-
-Several options are available that trade off image quality to gain speed.
-"-fast" turns on the recommended settings.
-
-"-dct fast" and/or "-nosmooth" gain speed at a small sacrifice in quality.
-When producing a color-quantized image, "-onepass -dither ordered" is fast but
-much lower quality than the default behavior.  "-dither none" may give
-acceptable results in two-pass mode, but is seldom tolerable in one-pass mode.
-
-If you are fortunate enough to have very fast floating point hardware,
-"-dct float" may be even faster than "-dct fast".  But on most machines
-"-dct float" is slower than "-dct int"; in this case it is not worth using,
-because its theoretical accuracy advantage is too small to be significant
-in practice.
-
-Two-pass color quantization requires a good deal of memory; on MS-DOS machines
-it may run out of memory even with -maxmemory 0.  In that case you can still
-decompress, with some loss of image quality, by specifying -onepass for
-one-pass quantization.
-
-To avoid the Unisys LZW patent, djpeg produces uncompressed GIF files.  These
-are larger than they should be, but are readable by standard GIF decoders.
-
-
-HINTS FOR BOTH PROGRAMS
-
-If more space is needed than will fit in the available main memory (as
-determined by -maxmemory), temporary files will be used.  (MS-DOS versions
-will try to get extended or expanded memory first.)  The temporary files are
-often rather large: in typical cases they occupy three bytes per pixel, for
-example 3*800*600 = 1.44Mb for an 800x600 image.  If you don't have enough
-free disk space, leave out -progressive and -optimize (for cjpeg) or specify
--onepass (for djpeg).
-
-On MS-DOS, the temporary files are created in the directory named by the TMP
-or TEMP environment variable, or in the current directory if neither of those
-exist.  Amiga implementations put the temp files in the directory named by
-JPEGTMP:, so be sure to assign JPEGTMP: to a disk partition with adequate free
-space.
-
-The default memory usage limit (-maxmemory) is set when the software is
-compiled.  If you get an "insufficient memory" error, try specifying a smaller
--maxmemory value, even -maxmemory 0 to use the absolute minimum space.  You
-may want to recompile with a smaller default value if this happens often.
-
-On machines that have "environment" variables, you can define the environment
-variable JPEGMEM to set the default memory limit.  The value is specified as
-described for the -maxmemory switch.  JPEGMEM overrides the default value
-specified when the program was compiled, and itself is overridden by an
-explicit -maxmemory switch.
-
-On MS-DOS machines, -maxmemory is the amount of main (conventional) memory to
-use.  (Extended or expanded memory is also used if available.)  Most
-DOS-specific versions of this software do their own memory space estimation
-and do not need you to specify -maxmemory.
-
-
-JPEGTRAN
-
-jpegtran performs various useful transformations of JPEG files.
-It can translate the coded representation from one variant of JPEG to another,
-for example from baseline JPEG to progressive JPEG or vice versa.  It can also
-perform some rearrangements of the image data, for example turning an image
-from landscape to portrait format by rotation.
-
-jpegtran works by rearranging the compressed data (DCT coefficients), without
-ever fully decoding the image.  Therefore, its transformations are lossless:
-there is no image degradation at all, which would not be true if you used
-djpeg followed by cjpeg to accomplish the same conversion.  But by the same
-token, jpegtran cannot perform lossy operations such as changing the image
-quality.
-
-jpegtran uses a command line syntax similar to cjpeg or djpeg.
-On Unix-like systems, you say:
-	jpegtran [switches] [inputfile] >outputfile
-On most non-Unix systems, you say:
-	jpegtran [switches] inputfile outputfile
-where both the input and output files are JPEG files.
-
-To specify the coded JPEG representation used in the output file,
-jpegtran accepts a subset of the switches recognized by cjpeg:
-	-optimize	Perform optimization of entropy encoding parameters.
-	-progressive	Create progressive JPEG file.
-	-restart N	Emit a JPEG restart marker every N MCU rows, or every
-			N MCU blocks if "B" is attached to the number.
-	-scans file	Use the scan script given in the specified text file.
-See the previous discussion of cjpeg for more details about these switches.
-If you specify none of these switches, you get a plain baseline-JPEG output
-file.  The quality setting and so forth are determined by the input file.
-
-The image can be losslessly transformed by giving one of these switches:
-	-flip horizontal	Mirror image horizontally (left-right).
-	-flip vertical		Mirror image vertically (top-bottom).
-	-rotate 90		Rotate image 90 degrees clockwise.
-	-rotate 180		Rotate image 180 degrees.
-	-rotate 270		Rotate image 270 degrees clockwise (or 90 ccw).
-	-transpose		Transpose image (across UL-to-LR axis).
-	-transverse		Transverse transpose (across UR-to-LL axis).
-
-The transpose transformation has no restrictions regarding image dimensions.
-The other transformations operate rather oddly if the image dimensions are not
-a multiple of the iMCU size (usually 8 or 16 pixels), because they can only
-transform complete blocks of DCT coefficient data in the desired way.
-
-jpegtran's default behavior when transforming an odd-size image is designed
-to preserve exact reversibility and mathematical consistency of the
-transformation set.  As stated, transpose is able to flip the entire image
-area.  Horizontal mirroring leaves any partial iMCU column at the right edge
-untouched, but is able to flip all rows of the image.  Similarly, vertical
-mirroring leaves any partial iMCU row at the bottom edge untouched, but is
-able to flip all columns.  The other transforms can be built up as sequences
-of transpose and flip operations; for consistency, their actions on edge
-pixels are defined to be the same as the end result of the corresponding
-transpose-and-flip sequence.
-
-For practical use, you may prefer to discard any untransformable edge pixels
-rather than having a strange-looking strip along the right and/or bottom edges
-of a transformed image.  To do this, add the -trim switch:
-	-trim		Drop non-transformable edge blocks.
-Obviously, a transformation with -trim is not reversible, so strictly speaking
-jpegtran with this switch is not lossless.  Also, the expected mathematical
-equivalences between the transformations no longer hold.  For example,
-"-rot 270 -trim" trims only the bottom edge, but "-rot 90 -trim" followed by
-"-rot 180 -trim" trims both edges.
-
-Another not-strictly-lossless transformation switch is:
-	-grayscale	Force grayscale output.
-This option discards the chrominance channels if the input image is YCbCr
-(ie, a standard color JPEG), resulting in a grayscale JPEG file.  The
-luminance channel is preserved exactly, so this is a better method of reducing
-to grayscale than decompression, conversion, and recompression.  This switch
-is particularly handy for fixing a monochrome picture that was mistakenly
-encoded as a color JPEG.  (In such a case, the space savings from getting rid
-of the near-empty chroma channels won't be large; but the decoding time for
-a grayscale JPEG is substantially less than that for a color JPEG.)
-
-jpegtran also recognizes these switches that control what to do with "extra"
-markers, such as comment blocks:
-	-copy none	Copy no extra markers from source file.  This setting
-			suppresses all comments and other excess baggage
-			present in the source file.
-	-copy comments	Copy only comment markers.  This setting copies
-			comments from the source file, but discards
-			any other inessential data. 
-	-copy all	Copy all extra markers.  This setting preserves
-			miscellaneous markers found in the source file, such
-			as JFIF thumbnails and Photoshop settings.  In some
-			files these extra markers can be sizable.
-The default behavior is -copy comments.  (Note: in IJG releases v6 and v6a,
-jpegtran always did the equivalent of -copy none.)
-
-Additional switches recognized by jpegtran are:
-	-outfile filename
-	-maxmemory N
-	-verbose
-	-debug
-These work the same as in cjpeg or djpeg.
-
-
-THE COMMENT UTILITIES
-
-The JPEG standard allows "comment" (COM) blocks to occur within a JPEG file.
-Although the standard doesn't actually define what COM blocks are for, they
-are widely used to hold user-supplied text strings.  This lets you add
-annotations, titles, index terms, etc to your JPEG files, and later retrieve
-them as text.  COM blocks do not interfere with the image stored in the JPEG
-file.  The maximum size of a COM block is 64K, but you can have as many of
-them as you like in one JPEG file.
-
-We provide two utility programs to display COM block contents and add COM
-blocks to a JPEG file.
-
-rdjpgcom searches a JPEG file and prints the contents of any COM blocks on
-standard output.  The command line syntax is
-	rdjpgcom [-verbose] [inputfilename]
-The switch "-verbose" (or just "-v") causes rdjpgcom to also display the JPEG
-image dimensions.  If you omit the input file name from the command line,
-the JPEG file is read from standard input.  (This may not work on some
-operating systems, if binary data can't be read from stdin.)
-
-wrjpgcom adds a COM block, containing text you provide, to a JPEG file.
-Ordinarily, the COM block is added after any existing COM blocks, but you
-can delete the old COM blocks if you wish.  wrjpgcom produces a new JPEG
-file; it does not modify the input file.  DO NOT try to overwrite the input
-file by directing wrjpgcom's output back into it; on most systems this will
-just destroy your file.
-
-The command line syntax for wrjpgcom is similar to cjpeg's.  On Unix-like
-systems, it is
-	wrjpgcom [switches] [inputfilename]
-The output file is written to standard output.  The input file comes from
-the named file, or from standard input if no input file is named.
-
-On most non-Unix systems, the syntax is
-	wrjpgcom [switches] inputfilename outputfilename
-where both input and output file names must be given explicitly.
-
-wrjpgcom understands three switches:
-	-replace		 Delete any existing COM blocks from the file.
-	-comment "Comment text"	 Supply new COM text on command line.
-	-cfile name		 Read text for new COM block from named file.
-(Switch names can be abbreviated.)  If you have only one line of comment text
-to add, you can provide it on the command line with -comment.  The comment
-text must be surrounded with quotes so that it is treated as a single
-argument.  Longer comments can be read from a text file.
-
-If you give neither -comment nor -cfile, then wrjpgcom will read the comment
-text from standard input.  (In this case an input image file name MUST be
-supplied, so that the source JPEG file comes from somewhere else.)  You can
-enter multiple lines, up to 64KB worth.  Type an end-of-file indicator
-(usually control-D or control-Z) to terminate the comment text entry.
-
-wrjpgcom will not add a COM block if the provided comment string is empty.
-Therefore -replace -comment "" can be used to delete all COM blocks from a
-file.
-
-These utility programs do not depend on the IJG JPEG library.  In
-particular, the source code for rdjpgcom is intended as an illustration of
-the minimum amount of code required to parse a JPEG file header correctly.

Engine/lib/ljpeg/extras/wizard.doc

@@ -1,211 +0,0 @@
-Advanced usage instructions for the Independent JPEG Group's JPEG software
-==========================================================================
-
-This file describes cjpeg's "switches for wizards".
-
-The "wizard" switches are intended for experimentation with JPEG by persons
-who are reasonably knowledgeable about the JPEG standard.  If you don't know
-what you are doing, DON'T USE THESE SWITCHES.  You'll likely produce files
-with worse image quality and/or poorer compression than you'd get from the
-default settings.  Furthermore, these switches must be used with caution
-when making files intended for general use, because not all JPEG decoders
-will support unusual JPEG parameter settings.
-
-
-Quantization Table Adjustment
------------------------------
-
-Ordinarily, cjpeg starts with a default set of tables (the same ones given
-as examples in the JPEG standard) and scales them up or down according to
-the -quality setting.  The details of the scaling algorithm can be found in
-jcparam.c.  At very low quality settings, some quantization table entries
-can get scaled up to values exceeding 255.  Although 2-byte quantization
-values are supported by the IJG software, this feature is not in baseline
-JPEG and is not supported by all implementations.  If you need to ensure
-wide compatibility of low-quality files, you can constrain the scaled
-quantization values to no more than 255 by giving the -baseline switch.
-Note that use of -baseline will result in poorer quality for the same file
-size, since more bits than necessary are expended on higher AC coefficients.
-
-You can substitute a different set of quantization values by using the
--qtables switch:
-
-	-qtables file	Use the quantization tables given in the named file.
-
-The specified file should be a text file containing decimal quantization
-values.  The file should contain one to four tables, each of 64 elements.
-The tables are implicitly numbered 0,1,etc. in order of appearance.  Table
-entries appear in normal array order (NOT in the zigzag order in which they
-will be stored in the JPEG file).
-
-Quantization table files are free format, in that arbitrary whitespace can
-appear between numbers.  Also, comments can be included: a comment starts
-with '#' and extends to the end of the line.  Here is an example file that
-duplicates the default quantization tables:
-
-	# Quantization tables given in JPEG spec, section K.1
-
-	# This is table 0 (the luminance table):
-	  16  11  10  16  24  40  51  61
-	  12  12  14  19  26  58  60  55
-	  14  13  16  24  40  57  69  56
-	  14  17  22  29  51  87  80  62
-	  18  22  37  56  68 109 103  77
-	  24  35  55  64  81 104 113  92
-	  49  64  78  87 103 121 120 101
-	  72  92  95  98 112 100 103  99
-
-	# This is table 1 (the chrominance table):
-	  17  18  24  47  99  99  99  99
-	  18  21  26  66  99  99  99  99
-	  24  26  56  99  99  99  99  99
-	  47  66  99  99  99  99  99  99
-	  99  99  99  99  99  99  99  99
-	  99  99  99  99  99  99  99  99
-	  99  99  99  99  99  99  99  99
-	  99  99  99  99  99  99  99  99
-
-If the -qtables switch is used without -quality, then the specified tables
-are used exactly as-is.  If both -qtables and -quality are used, then the
-tables taken from the file are scaled in the same fashion that the default
-tables would be scaled for that quality setting.  If -baseline appears, then
-the quantization values are constrained to the range 1-255.
-
-By default, cjpeg will use quantization table 0 for luminance components and
-table 1 for chrominance components.  To override this choice, use the -qslots
-switch:
-
-	-qslots N[,...]		Select which quantization table to use for
-				each color component.
-
-The -qslots switch specifies a quantization table number for each color
-component, in the order in which the components appear in the JPEG SOF marker.
-For example, to create a separate table for each of Y,Cb,Cr, you could
-provide a -qtables file that defines three quantization tables and say
-"-qslots 0,1,2".  If -qslots gives fewer table numbers than there are color
-components, then the last table number is repeated as necessary.
-
-
-Sampling Factor Adjustment
---------------------------
-
-By default, cjpeg uses 2:1 horizontal and vertical downsampling when
-compressing YCbCr data, and no downsampling for all other color spaces.
-You can override this default with the -sample switch:
-
-	-sample HxV[,...]	Set JPEG sampling factors for each color
-				component.
-
-The -sample switch specifies the JPEG sampling factors for each color
-component, in the order in which they appear in the JPEG SOF marker.
-If you specify fewer HxV pairs than there are components, the remaining
-components are set to 1x1 sampling.  For example, the default YCbCr setting
-is equivalent to "-sample 2x2,1x1,1x1", which can be abbreviated to
-"-sample 2x2".
-
-There are still some JPEG decoders in existence that support only 2x1
-sampling (also called 4:2:2 sampling).  Compatibility with such decoders can
-be achieved by specifying "-sample 2x1".  This is not recommended unless
-really necessary, since it increases file size and encoding/decoding time
-with very little quality gain.
-
-
-Multiple Scan / Progression Control
------------------------------------
-
-By default, cjpeg emits a single-scan sequential JPEG file.  The
--progressive switch generates a progressive JPEG file using a default series
-of progression parameters.  You can create multiple-scan sequential JPEG
-files or progressive JPEG files with custom progression parameters by using
-the -scans switch:
-
-	-scans file	Use the scan sequence given in the named file.
-
-The specified file should be a text file containing a "scan script".
-The script specifies the contents and ordering of the scans to be emitted.
-Each entry in the script defines one scan.  A scan definition specifies
-the components to be included in the scan, and for progressive JPEG it also
-specifies the progression parameters Ss,Se,Ah,Al for the scan.  Scan
-definitions are separated by semicolons (';').  A semicolon after the last
-scan definition is optional.
-
-Each scan definition contains one to four component indexes, optionally
-followed by a colon (':') and the four progressive-JPEG parameters.  The
-component indexes denote which color component(s) are to be transmitted in
-the scan.  Components are numbered in the order in which they appear in the
-JPEG SOF marker, with the first component being numbered 0.  (Note that these
-indexes are not the "component ID" codes assigned to the components, just
-positional indexes.)
-
-The progression parameters for each scan are:
-	Ss	Zigzag index of first coefficient included in scan
-	Se	Zigzag index of last coefficient included in scan
-	Ah	Zero for first scan of a coefficient, else Al of prior scan
-	Al	Successive approximation low bit position for scan
-If the progression parameters are omitted, the values 0,63,0,0 are used,
-producing a sequential JPEG file.  cjpeg automatically determines whether
-the script represents a progressive or sequential file, by observing whether
-Ss and Se values other than 0 and 63 appear.  (The -progressive switch is
-not needed to specify this; in fact, it is ignored when -scans appears.)
-The scan script must meet the JPEG restrictions on progression sequences.
-(cjpeg checks that the spec's requirements are obeyed.)
-
-Scan script files are free format, in that arbitrary whitespace can appear
-between numbers and around punctuation.  Also, comments can be included: a
-comment starts with '#' and extends to the end of the line.  For additional
-legibility, commas or dashes can be placed between values.  (Actually, any
-single punctuation character other than ':' or ';' can be inserted.)  For
-example, the following two scan definitions are equivalent:
-	0 1 2: 0 63 0 0;
-	0,1,2 : 0-63, 0,0 ;
-
-Here is an example of a scan script that generates a partially interleaved
-sequential JPEG file:
-
-	0;			# Y only in first scan
-	1 2;			# Cb and Cr in second scan
-
-Here is an example of a progressive scan script using only spectral selection
-(no successive approximation):
-
-	# Interleaved DC scan for Y,Cb,Cr:
-	0,1,2: 0-0,   0, 0 ;
-	# AC scans:
-	0:     1-2,   0, 0 ;	# First two Y AC coefficients
-	0:     3-5,   0, 0 ;	# Three more
-	1:     1-63,  0, 0 ;	# All AC coefficients for Cb
-	2:     1-63,  0, 0 ;	# All AC coefficients for Cr
-	0:     6-9,   0, 0 ;	# More Y coefficients
-	0:     10-63, 0, 0 ;	# Remaining Y coefficients
-
-Here is an example of a successive-approximation script.  This is equivalent
-to the default script used by "cjpeg -progressive" for YCbCr images:
-
-	# Initial DC scan for Y,Cb,Cr (lowest bit not sent)
-	0,1,2: 0-0,   0, 1 ;
-	# First AC scan: send first 5 Y AC coefficients, minus 2 lowest bits:
-	0:     1-5,   0, 2 ;
-	# Send all Cr,Cb AC coefficients, minus lowest bit:
-	# (chroma data is usually too small to be worth subdividing further;
-	#  but note we send Cr first since eye is least sensitive to Cb)
-	2:     1-63,  0, 1 ;
-	1:     1-63,  0, 1 ;
-	# Send remaining Y AC coefficients, minus 2 lowest bits:
-	0:     6-63,  0, 2 ;
-	# Send next-to-lowest bit of all Y AC coefficients:
-	0:     1-63,  2, 1 ;
-	# At this point we've sent all but the lowest bit of all coefficients.
-	# Send lowest bit of DC coefficients
-	0,1,2: 0-0,   1, 0 ;
-	# Send lowest bit of AC coefficients
-	2:     1-63,  1, 0 ;
-	1:     1-63,  1, 0 ;
-	# Y AC lowest bit scan is last; it's usually the largest scan
-	0:     1-63,  1, 0 ;
-
-It may be worth pointing out that this script is tuned for quality settings
-of around 50 to 75.  For lower quality settings, you'd probably want to use
-a script with fewer stages of successive approximation (otherwise the
-initial scans will be really bad).  For higher quality settings, you might
-want to use more stages of successive approximation (so that the initial
-scans are not too large).

Engine/lib/ljpeg/extras/wrbmp.c

@@ -1,442 +0,0 @@
-/*
- * wrbmp.c
- *
- * Copyright (C) 1994-1996, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains routines to write output images in Microsoft "BMP"
- * format (MS Windows 3.x and OS/2 1.x flavors).
- * Either 8-bit colormapped or 24-bit full-color format can be written.
- * No compression is supported.
- *
- * These routines may need modification for non-Unix environments or
- * specialized applications.  As they stand, they assume output to
- * an ordinary stdio stream.
- *
- * This code contributed by James Arthur Boucher.
- */
-
-#include "cdjpeg.h"		/* Common decls for cjpeg/djpeg applications */
-
-#ifdef BMP_SUPPORTED
-
-
-/*
- * To support 12-bit JPEG data, we'd have to scale output down to 8 bits.
- * This is not yet implemented.
- */
-
-#if BITS_IN_JSAMPLE != 8
-  Sorry, this code only copes with 8-bit JSAMPLEs. /* deliberate syntax err */
-#endif
-
-/*
- * Since BMP stores scanlines bottom-to-top, we have to invert the image
- * from JPEG's top-to-bottom order.  To do this, we save the outgoing data
- * in a virtual array during put_pixel_row calls, then actually emit the
- * BMP file during finish_output.  The virtual array contains one JSAMPLE per
- * pixel if the output is grayscale or colormapped, three if it is full color.
- */
-
-/* Private version of data destination object */
-
-typedef struct {
-  struct djpeg_dest_struct pub;	/* public fields */
-
-  boolean is_os2;		/* saves the OS2 format request flag */
-
-  jvirt_sarray_ptr whole_image;	/* needed to reverse row order */
-  JDIMENSION data_width;	/* JSAMPLEs per row */
-  JDIMENSION row_width;		/* physical width of one row in the BMP file */
-  int pad_bytes;		/* number of padding bytes needed per row */
-  JDIMENSION cur_output_row;	/* next row# to write to virtual array */
-} bmp_dest_struct;
-
-typedef bmp_dest_struct * bmp_dest_ptr;
-
-
-/* Forward declarations */
-LOCAL(void) write_colormap
-	JPP((j_decompress_ptr cinfo, bmp_dest_ptr dest,
-	     int map_colors, int map_entry_size));
-
-
-/*
- * Write some pixel data.
- * In this module rows_supplied will always be 1.
- */
-
-METHODDEF(void)
-put_pixel_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo,
-		JDIMENSION rows_supplied)
-/* This version is for writing 24-bit pixels */
-{
-  bmp_dest_ptr dest = (bmp_dest_ptr) dinfo;
-  JSAMPARRAY image_ptr;
-  register JSAMPROW inptr, outptr;
-  register JDIMENSION col;
-  int pad;
-
-  /* Access next row in virtual array */
-  image_ptr = (*cinfo->mem->access_virt_sarray)
-    ((j_common_ptr) cinfo, dest->whole_image,
-     dest->cur_output_row, (JDIMENSION) 1, TRUE);
-  dest->cur_output_row++;
-
-  /* Transfer data.  Note destination values must be in BGR order
-   * (even though Microsoft's own documents say the opposite).
-   */
-  inptr = dest->pub.buffer[0];
-  outptr = image_ptr[0];
-  for (col = cinfo->output_width; col > 0; col--) {
-    outptr[2] = *inptr++;	/* can omit GETJSAMPLE() safely */
-    outptr[1] = *inptr++;
-    outptr[0] = *inptr++;
-    outptr += 3;
-  }
-
-  /* Zero out the pad bytes. */
-  pad = dest->pad_bytes;
-  while (--pad >= 0)
-    *outptr++ = 0;
-}
-
-METHODDEF(void)
-put_gray_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo,
-	       JDIMENSION rows_supplied)
-/* This version is for grayscale OR quantized color output */
-{
-  bmp_dest_ptr dest = (bmp_dest_ptr) dinfo;
-  JSAMPARRAY image_ptr;
-  register JSAMPROW inptr, outptr;
-  register JDIMENSION col;
-  int pad;
-
-  /* Access next row in virtual array */
-  image_ptr = (*cinfo->mem->access_virt_sarray)
-    ((j_common_ptr) cinfo, dest->whole_image,
-     dest->cur_output_row, (JDIMENSION) 1, TRUE);
-  dest->cur_output_row++;
-
-  /* Transfer data. */
-  inptr = dest->pub.buffer[0];
-  outptr = image_ptr[0];
-  for (col = cinfo->output_width; col > 0; col--) {
-    *outptr++ = *inptr++;	/* can omit GETJSAMPLE() safely */
-  }
-
-  /* Zero out the pad bytes. */
-  pad = dest->pad_bytes;
-  while (--pad >= 0)
-    *outptr++ = 0;
-}
-
-
-/*
- * Startup: normally writes the file header.
- * In this module we may as well postpone everything until finish_output.
- */
-
-METHODDEF(void)
-start_output_bmp (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo)
-{
-  /* no work here */
-}
-
-
-/*
- * Finish up at the end of the file.
- *
- * Here is where we really output the BMP file.
- *
- * First, routines to write the Windows and OS/2 variants of the file header.
- */
-
-LOCAL(void)
-write_bmp_header (j_decompress_ptr cinfo, bmp_dest_ptr dest)
-/* Write a Windows-style BMP file header, including colormap if needed */
-{
-  char bmpfileheader[14];
-  char bmpinfoheader[40];
-#define PUT_2B(array,offset,value)  \
-	(array[offset] = (char) ((value) & 0xFF), \
-	 array[offset+1] = (char) (((value) >> 8) & 0xFF))
-#define PUT_4B(array,offset,value)  \
-	(array[offset] = (char) ((value) & 0xFF), \
-	 array[offset+1] = (char) (((value) >> 8) & 0xFF), \
-	 array[offset+2] = (char) (((value) >> 16) & 0xFF), \
-	 array[offset+3] = (char) (((value) >> 24) & 0xFF))
-  INT32 headersize, bfSize;
-  int bits_per_pixel, cmap_entries;
-
-  /* Compute colormap size and total file size */
-  if (cinfo->out_color_space == JCS_RGB) {
-    if (cinfo->quantize_colors) {
-      /* Colormapped RGB */
-      bits_per_pixel = 8;
-      cmap_entries = 256;
-    } else {
-      /* Unquantized, full color RGB */
-      bits_per_pixel = 24;
-      cmap_entries = 0;
-    }
-  } else {
-    /* Grayscale output.  We need to fake a 256-entry colormap. */
-    bits_per_pixel = 8;
-    cmap_entries = 256;
-  }
-  /* File size */
-  headersize = 14 + 40 + cmap_entries * 4; /* Header and colormap */
-  bfSize = headersize + (INT32) dest->row_width * (INT32) cinfo->output_height;
-  
-  /* Set unused fields of header to 0 */
-  MEMZERO(bmpfileheader, SIZEOF(bmpfileheader));
-  MEMZERO(bmpinfoheader, SIZEOF(bmpinfoheader));
-
-  /* Fill the file header */
-  bmpfileheader[0] = 0x42;	/* first 2 bytes are ASCII 'B', 'M' */
-  bmpfileheader[1] = 0x4D;
-  PUT_4B(bmpfileheader, 2, bfSize); /* bfSize */
-  /* we leave bfReserved1 & bfReserved2 = 0 */
-  PUT_4B(bmpfileheader, 10, headersize); /* bfOffBits */
-
-  /* Fill the info header (Microsoft calls this a BITMAPINFOHEADER) */
-  PUT_2B(bmpinfoheader, 0, 40);	/* biSize */
-  PUT_4B(bmpinfoheader, 4, cinfo->output_width); /* biWidth */
-  PUT_4B(bmpinfoheader, 8, cinfo->output_height); /* biHeight */
-  PUT_2B(bmpinfoheader, 12, 1);	/* biPlanes - must be 1 */
-  PUT_2B(bmpinfoheader, 14, bits_per_pixel); /* biBitCount */
-  /* we leave biCompression = 0, for none */
-  /* we leave biSizeImage = 0; this is correct for uncompressed data */
-  if (cinfo->density_unit == 2) { /* if have density in dots/cm, then */
-    PUT_4B(bmpinfoheader, 24, (INT32) (cinfo->X_density*100)); /* XPels/M */
-    PUT_4B(bmpinfoheader, 28, (INT32) (cinfo->Y_density*100)); /* XPels/M */
-  }
-  PUT_2B(bmpinfoheader, 32, cmap_entries); /* biClrUsed */
-  /* we leave biClrImportant = 0 */
-
-  if (JFWRITE(dest->pub.output_file, bmpfileheader, 14) != (size_t) 14)
-    ERREXIT(cinfo, JERR_FILE_WRITE);
-  if (JFWRITE(dest->pub.output_file, bmpinfoheader, 40) != (size_t) 40)
-    ERREXIT(cinfo, JERR_FILE_WRITE);
-
-  if (cmap_entries > 0)
-    write_colormap(cinfo, dest, cmap_entries, 4);
-}
-
-
-LOCAL(void)
-write_os2_header (j_decompress_ptr cinfo, bmp_dest_ptr dest)
-/* Write an OS2-style BMP file header, including colormap if needed */
-{
-  char bmpfileheader[14];
-  char bmpcoreheader[12];
-  INT32 headersize, bfSize;
-  int bits_per_pixel, cmap_entries;
-
-  /* Compute colormap size and total file size */
-  if (cinfo->out_color_space == JCS_RGB) {
-    if (cinfo->quantize_colors) {
-      /* Colormapped RGB */
-      bits_per_pixel = 8;
-      cmap_entries = 256;
-    } else {
-      /* Unquantized, full color RGB */
-      bits_per_pixel = 24;
-      cmap_entries = 0;
-    }
-  } else {
-    /* Grayscale output.  We need to fake a 256-entry colormap. */
-    bits_per_pixel = 8;
-    cmap_entries = 256;
-  }
-  /* File size */
-  headersize = 14 + 12 + cmap_entries * 3; /* Header and colormap */
-  bfSize = headersize + (INT32) dest->row_width * (INT32) cinfo->output_height;
-  
-  /* Set unused fields of header to 0 */
-  MEMZERO(bmpfileheader, SIZEOF(bmpfileheader));
-  MEMZERO(bmpcoreheader, SIZEOF(bmpcoreheader));
-
-  /* Fill the file header */
-  bmpfileheader[0] = 0x42;	/* first 2 bytes are ASCII 'B', 'M' */
-  bmpfileheader[1] = 0x4D;
-  PUT_4B(bmpfileheader, 2, bfSize); /* bfSize */
-  /* we leave bfReserved1 & bfReserved2 = 0 */
-  PUT_4B(bmpfileheader, 10, headersize); /* bfOffBits */
-
-  /* Fill the info header (Microsoft calls this a BITMAPCOREHEADER) */
-  PUT_2B(bmpcoreheader, 0, 12);	/* bcSize */
-  PUT_2B(bmpcoreheader, 4, cinfo->output_width); /* bcWidth */
-  PUT_2B(bmpcoreheader, 6, cinfo->output_height); /* bcHeight */
-  PUT_2B(bmpcoreheader, 8, 1);	/* bcPlanes - must be 1 */
-  PUT_2B(bmpcoreheader, 10, bits_per_pixel); /* bcBitCount */
-
-  if (JFWRITE(dest->pub.output_file, bmpfileheader, 14) != (size_t) 14)
-    ERREXIT(cinfo, JERR_FILE_WRITE);
-  if (JFWRITE(dest->pub.output_file, bmpcoreheader, 12) != (size_t) 12)
-    ERREXIT(cinfo, JERR_FILE_WRITE);
-
-  if (cmap_entries > 0)
-    write_colormap(cinfo, dest, cmap_entries, 3);
-}
-
-
-/*
- * Write the colormap.
- * Windows uses BGR0 map entries; OS/2 uses BGR entries.
- */
-
-LOCAL(void)
-write_colormap (j_decompress_ptr cinfo, bmp_dest_ptr dest,
-		int map_colors, int map_entry_size)
-{
-  JSAMPARRAY colormap = cinfo->colormap;
-  int num_colors = cinfo->actual_number_of_colors;
-  FILE * outfile = dest->pub.output_file;
-  int i;
-
-  if (colormap != NULL) {
-    if (cinfo->out_color_components == 3) {
-      /* Normal case with RGB colormap */
-      for (i = 0; i < num_colors; i++) {
-	putc(GETJSAMPLE(colormap[2][i]), outfile);
-	putc(GETJSAMPLE(colormap[1][i]), outfile);
-	putc(GETJSAMPLE(colormap[0][i]), outfile);
-	if (map_entry_size == 4)
-	  putc(0, outfile);
-      }
-    } else {
-      /* Grayscale colormap (only happens with grayscale quantization) */
-      for (i = 0; i < num_colors; i++) {
-	putc(GETJSAMPLE(colormap[0][i]), outfile);
-	putc(GETJSAMPLE(colormap[0][i]), outfile);
-	putc(GETJSAMPLE(colormap[0][i]), outfile);
-	if (map_entry_size == 4)
-	  putc(0, outfile);
-      }
-    }
-  } else {
-    /* If no colormap, must be grayscale data.  Generate a linear "map". */
-    for (i = 0; i < 256; i++) {
-      putc(i, outfile);
-      putc(i, outfile);
-      putc(i, outfile);
-      if (map_entry_size == 4)
-	putc(0, outfile);
-    }
-  }
-  /* Pad colormap with zeros to ensure specified number of colormap entries */ 
-  if (i > map_colors)
-    ERREXIT1(cinfo, JERR_TOO_MANY_COLORS, i);
-  for (; i < map_colors; i++) {
-    putc(0, outfile);
-    putc(0, outfile);
-    putc(0, outfile);
-    if (map_entry_size == 4)
-      putc(0, outfile);
-  }
-}
-
-
-METHODDEF(void)
-finish_output_bmp (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo)
-{
-  bmp_dest_ptr dest = (bmp_dest_ptr) dinfo;
-  register FILE * outfile = dest->pub.output_file;
-  JSAMPARRAY image_ptr;
-  register JSAMPROW data_ptr;
-  JDIMENSION row;
-  register JDIMENSION col;
-  cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress;
-
-  /* Write the header and colormap */
-  if (dest->is_os2)
-    write_os2_header(cinfo, dest);
-  else
-    write_bmp_header(cinfo, dest);
-
-  /* Write the file body from our virtual array */
-  for (row = cinfo->output_height; row > 0; row--) {
-    if (progress != NULL) {
-      progress->pub.pass_counter = (long) (cinfo->output_height - row);
-      progress->pub.pass_limit = (long) cinfo->output_height;
-      (*progress->pub.progress_monitor) ((j_common_ptr) cinfo);
-    }
-    image_ptr = (*cinfo->mem->access_virt_sarray)
-      ((j_common_ptr) cinfo, dest->whole_image, row-1, (JDIMENSION) 1, FALSE);
-    data_ptr = image_ptr[0];
-    for (col = dest->row_width; col > 0; col--) {
-      putc(GETJSAMPLE(*data_ptr), outfile);
-      data_ptr++;
-    }
-  }
-  if (progress != NULL)
-    progress->completed_extra_passes++;
-
-  /* Make sure we wrote the output file OK */
-  fflush(outfile);
-  if (ferror(outfile))
-    ERREXIT(cinfo, JERR_FILE_WRITE);
-}
-
-
-/*
- * The module selection routine for BMP format output.
- */
-
-GLOBAL(djpeg_dest_ptr)
-jinit_write_bmp (j_decompress_ptr cinfo, boolean is_os2)
-{
-  bmp_dest_ptr dest;
-  JDIMENSION row_width;
-
-  /* Create module interface object, fill in method pointers */
-  dest = (bmp_dest_ptr)
-      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				  SIZEOF(bmp_dest_struct));
-  dest->pub.start_output = start_output_bmp;
-  dest->pub.finish_output = finish_output_bmp;
-  dest->is_os2 = is_os2;
-
-  if (cinfo->out_color_space == JCS_GRAYSCALE) {
-    dest->pub.put_pixel_rows = put_gray_rows;
-  } else if (cinfo->out_color_space == JCS_RGB) {
-    if (cinfo->quantize_colors)
-      dest->pub.put_pixel_rows = put_gray_rows;
-    else
-      dest->pub.put_pixel_rows = put_pixel_rows;
-  } else {
-    ERREXIT(cinfo, JERR_BMP_COLORSPACE);
-  }
-
-  /* Calculate output image dimensions so we can allocate space */
-  jpeg_calc_output_dimensions(cinfo);
-
-  /* Determine width of rows in the BMP file (padded to 4-byte boundary). */
-  row_width = cinfo->output_width * cinfo->output_components;
-  dest->data_width = row_width;
-  while ((row_width & 3) != 0) row_width++;
-  dest->row_width = row_width;
-  dest->pad_bytes = (int) (row_width - dest->data_width);
-
-  /* Allocate space for inversion array, prepare for write pass */
-  dest->whole_image = (*cinfo->mem->request_virt_sarray)
-    ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE,
-     row_width, cinfo->output_height, (JDIMENSION) 1);
-  dest->cur_output_row = 0;
-  if (cinfo->progress != NULL) {
-    cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress;
-    progress->total_extra_passes++; /* count file input as separate pass */
-  }
-
-  /* Create decompressor output buffer. */
-  dest->pub.buffer = (*cinfo->mem->alloc_sarray)
-    ((j_common_ptr) cinfo, JPOOL_IMAGE, row_width, (JDIMENSION) 1);
-  dest->pub.buffer_height = 1;
-
-  return (djpeg_dest_ptr) dest;
-}
-
-#endif /* BMP_SUPPORTED */

Engine/lib/ljpeg/extras/wrgif.c

@@ -1,399 +0,0 @@
-/*
- * wrgif.c
- *
- * Copyright (C) 1991-1997, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains routines to write output images in GIF format.
- *
- **************************************************************************
- * NOTE: to avoid entanglements with Unisys' patent on LZW compression,   *
- * this code has been modified to output "uncompressed GIF" files.        *
- * There is no trace of the LZW algorithm in this file.                   *
- **************************************************************************
- *
- * These routines may need modification for non-Unix environments or
- * specialized applications.  As they stand, they assume output to
- * an ordinary stdio stream.
- */
-
-/*
- * This code is loosely based on ppmtogif from the PBMPLUS distribution
- * of Feb. 1991.  That file contains the following copyright notice:
- *    Based on GIFENCODE by David Rowley <[email protected]>.
- *    Lempel-Ziv compression based on "compress" by Spencer W. Thomas et al.
- *    Copyright (C) 1989 by Jef Poskanzer.
- *    Permission to use, copy, modify, and distribute this software and its
- *    documentation for any purpose and without fee is hereby granted, provided
- *    that the above copyright notice appear in all copies and that both that
- *    copyright notice and this permission notice appear in supporting
- *    documentation.  This software is provided "as is" without express or
- *    implied warranty.
- *
- * We are also required to state that
- *    "The Graphics Interchange Format(c) is the Copyright property of
- *    CompuServe Incorporated. GIF(sm) is a Service Mark property of
- *    CompuServe Incorporated."
- */
-
-#include "cdjpeg.h"		/* Common decls for cjpeg/djpeg applications */
-
-#ifdef GIF_SUPPORTED
-
-
-/* Private version of data destination object */
-
-typedef struct {
-  struct djpeg_dest_struct pub;	/* public fields */
-
-  j_decompress_ptr cinfo;	/* back link saves passing separate parm */
-
-  /* State for packing variable-width codes into a bitstream */
-  int n_bits;			/* current number of bits/code */
-  int maxcode;			/* maximum code, given n_bits */
-  INT32 cur_accum;		/* holds bits not yet output */
-  int cur_bits;			/* # of bits in cur_accum */
-
-  /* State for GIF code assignment */
-  int ClearCode;		/* clear code (doesn't change) */
-  int EOFCode;			/* EOF code (ditto) */
-  int code_counter;		/* counts output symbols */
-
-  /* GIF data packet construction buffer */
-  int bytesinpkt;		/* # of bytes in current packet */
-  char packetbuf[256];		/* workspace for accumulating packet */
-
-} gif_dest_struct;
-
-typedef gif_dest_struct * gif_dest_ptr;
-
-/* Largest value that will fit in N bits */
-#define MAXCODE(n_bits)	((1 << (n_bits)) - 1)
-
-
-/*
- * Routines to package finished data bytes into GIF data blocks.
- * A data block consists of a count byte (1..255) and that many data bytes.
- */
-
-LOCAL(void)
-flush_packet (gif_dest_ptr dinfo)
-/* flush any accumulated data */
-{
-  if (dinfo->bytesinpkt > 0) {	/* never write zero-length packet */
-    dinfo->packetbuf[0] = (char) dinfo->bytesinpkt++;
-    if (JFWRITE(dinfo->pub.output_file, dinfo->packetbuf, dinfo->bytesinpkt)
-	!= (size_t) dinfo->bytesinpkt)
-      ERREXIT(dinfo->cinfo, JERR_FILE_WRITE);
-    dinfo->bytesinpkt = 0;
-  }
-}
-
-
-/* Add a character to current packet; flush to disk if necessary */
-#define CHAR_OUT(dinfo,c)  \
-	{ (dinfo)->packetbuf[++(dinfo)->bytesinpkt] = (char) (c);  \
-	    if ((dinfo)->bytesinpkt >= 255)  \
-	      flush_packet(dinfo);  \
-	}
-
-
-/* Routine to convert variable-width codes into a byte stream */
-
-LOCAL(void)
-output (gif_dest_ptr dinfo, int code)
-/* Emit a code of n_bits bits */
-/* Uses cur_accum and cur_bits to reblock into 8-bit bytes */
-{
-  dinfo->cur_accum |= ((INT32) code) << dinfo->cur_bits;
-  dinfo->cur_bits += dinfo->n_bits;
-
-  while (dinfo->cur_bits >= 8) {
-    CHAR_OUT(dinfo, dinfo->cur_accum & 0xFF);
-    dinfo->cur_accum >>= 8;
-    dinfo->cur_bits -= 8;
-  }
-}
-
-
-/* The pseudo-compression algorithm.
- *
- * In this module we simply output each pixel value as a separate symbol;
- * thus, no compression occurs.  In fact, there is expansion of one bit per
- * pixel, because we use a symbol width one bit wider than the pixel width.
- *
- * GIF ordinarily uses variable-width symbols, and the decoder will expect
- * to ratchet up the symbol width after a fixed number of symbols.
- * To simplify the logic and keep the expansion penalty down, we emit a
- * GIF Clear code to reset the decoder just before the width would ratchet up.
- * Thus, all the symbols in the output file will have the same bit width.
- * Note that emitting the Clear codes at the right times is a mere matter of
- * counting output symbols and is in no way dependent on the LZW patent.
- *
- * With a small basic pixel width (low color count), Clear codes will be
- * needed very frequently, causing the file to expand even more.  So this
- * simplistic approach wouldn't work too well on bilevel images, for example.
- * But for output of JPEG conversions the pixel width will usually be 8 bits
- * (129 to 256 colors), so the overhead added by Clear symbols is only about
- * one symbol in every 256.
- */
-
-LOCAL(void)
-compress_init (gif_dest_ptr dinfo, int i_bits)
-/* Initialize pseudo-compressor */
-{
-  /* init all the state variables */
-  dinfo->n_bits = i_bits;
-  dinfo->maxcode = MAXCODE(dinfo->n_bits);
-  dinfo->ClearCode = (1 << (i_bits - 1));
-  dinfo->EOFCode = dinfo->ClearCode + 1;
-  dinfo->code_counter = dinfo->ClearCode + 2;
-  /* init output buffering vars */
-  dinfo->bytesinpkt = 0;
-  dinfo->cur_accum = 0;
-  dinfo->cur_bits = 0;
-  /* GIF specifies an initial Clear code */
-  output(dinfo, dinfo->ClearCode);
-}
-
-
-LOCAL(void)
-compress_pixel (gif_dest_ptr dinfo, int c)
-/* Accept and "compress" one pixel value.
- * The given value must be less than n_bits wide.
- */
-{
-  /* Output the given pixel value as a symbol. */
-  output(dinfo, c);
-  /* Issue Clear codes often enough to keep the reader from ratcheting up
-   * its symbol size.
-   */
-  if (dinfo->code_counter < dinfo->maxcode) {
-    dinfo->code_counter++;
-  } else {
-    output(dinfo, dinfo->ClearCode);
-    dinfo->code_counter = dinfo->ClearCode + 2;	/* reset the counter */
-  }
-}
-
-
-LOCAL(void)
-compress_term (gif_dest_ptr dinfo)
-/* Clean up at end */
-{
-  /* Send an EOF code */
-  output(dinfo, dinfo->EOFCode);
-  /* Flush the bit-packing buffer */
-  if (dinfo->cur_bits > 0) {
-    CHAR_OUT(dinfo, dinfo->cur_accum & 0xFF);
-  }
-  /* Flush the packet buffer */
-  flush_packet(dinfo);
-}
-
-
-/* GIF header construction */
-
-
-LOCAL(void)
-put_word (gif_dest_ptr dinfo, unsigned int w)
-/* Emit a 16-bit word, LSB first */
-{
-  putc(w & 0xFF, dinfo->pub.output_file);
-  putc((w >> 8) & 0xFF, dinfo->pub.output_file);
-}
-
-
-LOCAL(void)
-put_3bytes (gif_dest_ptr dinfo, int val)
-/* Emit 3 copies of same byte value --- handy subr for colormap construction */
-{
-  putc(val, dinfo->pub.output_file);
-  putc(val, dinfo->pub.output_file);
-  putc(val, dinfo->pub.output_file);
-}
-
-
-LOCAL(void)
-emit_header (gif_dest_ptr dinfo, int num_colors, JSAMPARRAY colormap)
-/* Output the GIF file header, including color map */
-/* If colormap==NULL, synthesize a gray-scale colormap */
-{
-  int BitsPerPixel, ColorMapSize, InitCodeSize, FlagByte;
-  int cshift = dinfo->cinfo->data_precision - 8;
-  int i;
-
-  if (num_colors > 256)
-    ERREXIT1(dinfo->cinfo, JERR_TOO_MANY_COLORS, num_colors);
-  /* Compute bits/pixel and related values */
-  BitsPerPixel = 1;
-  while (num_colors > (1 << BitsPerPixel))
-    BitsPerPixel++;
-  ColorMapSize = 1 << BitsPerPixel;
-  if (BitsPerPixel <= 1)
-    InitCodeSize = 2;
-  else
-    InitCodeSize = BitsPerPixel;
-  /*
-   * Write the GIF header.
-   * Note that we generate a plain GIF87 header for maximum compatibility.
-   */
-  putc('G', dinfo->pub.output_file);
-  putc('I', dinfo->pub.output_file);
-  putc('F', dinfo->pub.output_file);
-  putc('8', dinfo->pub.output_file);
-  putc('7', dinfo->pub.output_file);
-  putc('a', dinfo->pub.output_file);
-  /* Write the Logical Screen Descriptor */
-  put_word(dinfo, (unsigned int) dinfo->cinfo->output_width);
-  put_word(dinfo, (unsigned int) dinfo->cinfo->output_height);
-  FlagByte = 0x80;		/* Yes, there is a global color table */
-  FlagByte |= (BitsPerPixel-1) << 4; /* color resolution */
-  FlagByte |= (BitsPerPixel-1);	/* size of global color table */
-  putc(FlagByte, dinfo->pub.output_file);
-  putc(0, dinfo->pub.output_file); /* Background color index */
-  putc(0, dinfo->pub.output_file); /* Reserved (aspect ratio in GIF89) */
-  /* Write the Global Color Map */
-  /* If the color map is more than 8 bits precision, */
-  /* we reduce it to 8 bits by shifting */
-  for (i=0; i < ColorMapSize; i++) {
-    if (i < num_colors) {
-      if (colormap != NULL) {
-	if (dinfo->cinfo->out_color_space == JCS_RGB) {
-	  /* Normal case: RGB color map */
-	  putc(GETJSAMPLE(colormap[0][i]) >> cshift, dinfo->pub.output_file);
-	  putc(GETJSAMPLE(colormap[1][i]) >> cshift, dinfo->pub.output_file);
-	  putc(GETJSAMPLE(colormap[2][i]) >> cshift, dinfo->pub.output_file);
-	} else {
-	  /* Grayscale "color map": possible if quantizing grayscale image */
-	  put_3bytes(dinfo, GETJSAMPLE(colormap[0][i]) >> cshift);
-	}
-      } else {
-	/* Create a gray-scale map of num_colors values, range 0..255 */
-	put_3bytes(dinfo, (i * 255 + (num_colors-1)/2) / (num_colors-1));
-      }
-    } else {
-      /* fill out the map to a power of 2 */
-      put_3bytes(dinfo, 0);
-    }
-  }
-  /* Write image separator and Image Descriptor */
-  putc(',', dinfo->pub.output_file); /* separator */
-  put_word(dinfo, 0);		/* left/top offset */
-  put_word(dinfo, 0);
-  put_word(dinfo, (unsigned int) dinfo->cinfo->output_width); /* image size */
-  put_word(dinfo, (unsigned int) dinfo->cinfo->output_height);
-  /* flag byte: not interlaced, no local color map */
-  putc(0x00, dinfo->pub.output_file);
-  /* Write Initial Code Size byte */
-  putc(InitCodeSize, dinfo->pub.output_file);
-
-  /* Initialize for "compression" of image data */
-  compress_init(dinfo, InitCodeSize+1);
-}
-
-
-/*
- * Startup: write the file header.
- */
-
-METHODDEF(void)
-start_output_gif (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo)
-{
-  gif_dest_ptr dest = (gif_dest_ptr) dinfo;
-
-  if (cinfo->quantize_colors)
-    emit_header(dest, cinfo->actual_number_of_colors, cinfo->colormap);
-  else
-    emit_header(dest, 256, (JSAMPARRAY) NULL);
-}
-
-
-/*
- * Write some pixel data.
- * In this module rows_supplied will always be 1.
- */
-
-METHODDEF(void)
-put_pixel_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo,
-		JDIMENSION rows_supplied)
-{
-  gif_dest_ptr dest = (gif_dest_ptr) dinfo;
-  register JSAMPROW ptr;
-  register JDIMENSION col;
-
-  ptr = dest->pub.buffer[0];
-  for (col = cinfo->output_width; col > 0; col--) {
-    compress_pixel(dest, GETJSAMPLE(*ptr++));
-  }
-}
-
-
-/*
- * Finish up at the end of the file.
- */
-
-METHODDEF(void)
-finish_output_gif (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo)
-{
-  gif_dest_ptr dest = (gif_dest_ptr) dinfo;
-
-  /* Flush "compression" mechanism */
-  compress_term(dest);
-  /* Write a zero-length data block to end the series */
-  putc(0, dest->pub.output_file);
-  /* Write the GIF terminator mark */
-  putc(';', dest->pub.output_file);
-  /* Make sure we wrote the output file OK */
-  fflush(dest->pub.output_file);
-  if (ferror(dest->pub.output_file))
-    ERREXIT(cinfo, JERR_FILE_WRITE);
-}
-
-
-/*
- * The module selection routine for GIF format output.
- */
-
-GLOBAL(djpeg_dest_ptr)
-jinit_write_gif (j_decompress_ptr cinfo)
-{
-  gif_dest_ptr dest;
-
-  /* Create module interface object, fill in method pointers */
-  dest = (gif_dest_ptr)
-      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				  SIZEOF(gif_dest_struct));
-  dest->cinfo = cinfo;		/* make back link for subroutines */
-  dest->pub.start_output = start_output_gif;
-  dest->pub.put_pixel_rows = put_pixel_rows;
-  dest->pub.finish_output = finish_output_gif;
-
-  if (cinfo->out_color_space != JCS_GRAYSCALE &&
-      cinfo->out_color_space != JCS_RGB)
-    ERREXIT(cinfo, JERR_GIF_COLORSPACE);
-
-  /* Force quantization if color or if > 8 bits input */
-  if (cinfo->out_color_space != JCS_GRAYSCALE || cinfo->data_precision > 8) {
-    /* Force quantization to at most 256 colors */
-    cinfo->quantize_colors = TRUE;
-    if (cinfo->desired_number_of_colors > 256)
-      cinfo->desired_number_of_colors = 256;
-  }
-
-  /* Calculate output image dimensions so we can allocate space */
-  jpeg_calc_output_dimensions(cinfo);
-
-  if (cinfo->output_components != 1) /* safety check: just one component? */
-    ERREXIT(cinfo, JERR_GIF_BUG);
-
-  /* Create decompressor output buffer. */
-  dest->pub.buffer = (*cinfo->mem->alloc_sarray)
-    ((j_common_ptr) cinfo, JPOOL_IMAGE, cinfo->output_width, (JDIMENSION) 1);
-  dest->pub.buffer_height = 1;
-
-  return (djpeg_dest_ptr) dest;
-}
-
-#endif /* GIF_SUPPORTED */

Engine/lib/ljpeg/extras/wrjpgcom.1

@@ -1,103 +0,0 @@
-.TH WRJPGCOM 1 "15 June 1995"
-.SH NAME
-wrjpgcom \- insert text comments into a JPEG file
-.SH SYNOPSIS
-.B wrjpgcom
-[
-.B \-replace
-]
-[
-.BI \-comment " text"
-]
-[
-.BI \-cfile " name"
-]
-[
-.I filename
-]
-.LP
-.SH DESCRIPTION
-.LP
-.B wrjpgcom
-reads the named JPEG/JFIF file, or the standard input if no file is named,
-and generates a new JPEG/JFIF file on standard output.  A comment block is
-added to the file.
-.PP
-The JPEG standard allows "comment" (COM) blocks to occur within a JPEG file.
-Although the standard doesn't actually define what COM blocks are for, they
-are widely used to hold user-supplied text strings.  This lets you add
-annotations, titles, index terms, etc to your JPEG files, and later retrieve
-them as text.  COM blocks do not interfere with the image stored in the JPEG
-file.  The maximum size of a COM block is 64K, but you can have as many of
-them as you like in one JPEG file.
-.PP
-.B wrjpgcom
-adds a COM block, containing text you provide, to a JPEG file.
-Ordinarily, the COM block is added after any existing COM blocks; but you
-can delete the old COM blocks if you wish.
-.SH OPTIONS
-Switch names may be abbreviated, and are not case sensitive.
-.TP
-.B \-replace
-Delete any existing COM blocks from the file.
-.TP
-.BI \-comment " text"
-Supply text for new COM block on command line.
-.TP
-.BI \-cfile " name"
-Read text for new COM block from named file.
-.PP
-If you have only one line of comment text to add, you can provide it on the
-command line with
-.BR \-comment .
-The comment text must be surrounded with quotes so that it is treated as a
-single argument.  Longer comments can be read from a text file.
-.PP
-If you give neither
-.B \-comment
-nor
-.BR \-cfile ,
-then
-.B wrjpgcom
-will read the comment text from standard input.  (In this case an input image
-file name MUST be supplied, so that the source JPEG file comes from somewhere
-else.)  You can enter multiple lines, up to 64KB worth.  Type an end-of-file
-indicator (usually control-D) to terminate the comment text entry.
-.PP
-.B wrjpgcom
-will not add a COM block if the provided comment string is empty.  Therefore
-\fB\-replace \-comment ""\fR can be used to delete all COM blocks from a file.
-.SH EXAMPLES
-.LP
-Add a short comment to in.jpg, producing out.jpg:
-.IP
-.B wrjpgcom \-c
-\fI"View of my back yard" in.jpg
-.B >
-.I out.jpg
-.PP
-Attach a long comment previously stored in comment.txt:
-.IP
-.B wrjpgcom
-.I in.jpg
-.B <
-.I comment.txt
-.B >
-.I out.jpg
-.PP
-or equivalently
-.IP
-.B wrjpgcom
-.B -cfile
-.I comment.txt
-.B <
-.I in.jpg
-.B >
-.I out.jpg
-.SH SEE ALSO
-.BR cjpeg (1),
-.BR djpeg (1),
-.BR jpegtran (1),
-.BR rdjpgcom (1)
-.SH AUTHOR
-Independent JPEG Group

Engine/lib/ljpeg/extras/wrjpgcom.c

@@ -1,583 +0,0 @@
-/*
- * wrjpgcom.c
- *
- * Copyright (C) 1994-1997, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains a very simple stand-alone application that inserts
- * user-supplied text as a COM (comment) marker in a JFIF file.
- * This may be useful as an example of the minimum logic needed to parse
- * JPEG markers.
- */
-
-#define JPEG_CJPEG_DJPEG	/* to get the command-line config symbols */
-#include "jinclude.h"		/* get auto-config symbols, <stdio.h> */
-
-#ifndef HAVE_STDLIB_H		/* <stdlib.h> should declare malloc() */
-extern void * malloc ();
-#endif
-#include <ctype.h>		/* to declare isupper(), tolower() */
-#ifdef USE_SETMODE
-#include <fcntl.h>		/* to declare setmode()'s parameter macros */
-/* If you have setmode() but not <io.h>, just delete this line: */
-#include <io.h>			/* to declare setmode() */
-#endif
-
-#ifdef USE_CCOMMAND		/* command-line reader for Macintosh */
-#ifdef __MWERKS__
-#include <SIOUX.h>              /* Metrowerks needs this */
-#include <console.h>		/* ... and this */
-#endif
-#ifdef THINK_C
-#include <console.h>		/* Think declares it here */
-#endif
-#endif
-
-#ifdef DONT_USE_B_MODE		/* define mode parameters for fopen() */
-#define READ_BINARY	"r"
-#define WRITE_BINARY	"w"
-#else
-#ifdef VMS			/* VMS is very nonstandard */
-#define READ_BINARY	"rb", "ctx=stm"
-#define WRITE_BINARY	"wb", "ctx=stm"
-#else				/* standard ANSI-compliant case */
-#define READ_BINARY	"rb"
-#define WRITE_BINARY	"wb"
-#endif
-#endif
-
-#ifndef EXIT_FAILURE		/* define exit() codes if not provided */
-#define EXIT_FAILURE  1
-#endif
-#ifndef EXIT_SUCCESS
-#ifdef VMS
-#define EXIT_SUCCESS  1		/* VMS is very nonstandard */
-#else
-#define EXIT_SUCCESS  0
-#endif
-#endif
-
-/* Reduce this value if your malloc() can't allocate blocks up to 64K.
- * On DOS, compiling in large model is usually a better solution.
- */
-
-#ifndef MAX_COM_LENGTH
-#define MAX_COM_LENGTH 65000L	/* must be <= 65533 in any case */
-#endif
-
-
-/*
- * These macros are used to read the input file and write the output file.
- * To reuse this code in another application, you might need to change these.
- */
-
-static FILE * infile;		/* input JPEG file */
-
-/* Return next input byte, or EOF if no more */
-#define NEXTBYTE()  getc(infile)
-
-static FILE * outfile;		/* output JPEG file */
-
-/* Emit an output byte */
-#define PUTBYTE(x)  putc((x), outfile)
-
-
-/* Error exit handler */
-#define ERREXIT(msg)  (fprintf(stderr, "%s\n", msg), exit(EXIT_FAILURE))
-
-
-/* Read one byte, testing for EOF */
-static int
-read_1_byte (void)
-{
-  int c;
-
-  c = NEXTBYTE();
-  if (c == EOF)
-    ERREXIT("Premature EOF in JPEG file");
-  return c;
-}
-
-/* Read 2 bytes, convert to unsigned int */
-/* All 2-byte quantities in JPEG markers are MSB first */
-static unsigned int
-read_2_bytes (void)
-{
-  int c1, c2;
-
-  c1 = NEXTBYTE();
-  if (c1 == EOF)
-    ERREXIT("Premature EOF in JPEG file");
-  c2 = NEXTBYTE();
-  if (c2 == EOF)
-    ERREXIT("Premature EOF in JPEG file");
-  return (((unsigned int) c1) << 8) + ((unsigned int) c2);
-}
-
-
-/* Routines to write data to output file */
-
-static void
-write_1_byte (int c)
-{
-  PUTBYTE(c);
-}
-
-static void
-write_2_bytes (unsigned int val)
-{
-  PUTBYTE((val >> 8) & 0xFF);
-  PUTBYTE(val & 0xFF);
-}
-
-static void
-write_marker (int marker)
-{
-  PUTBYTE(0xFF);
-  PUTBYTE(marker);
-}
-
-static void
-copy_rest_of_file (void)
-{
-  int c;
-
-  while ((c = NEXTBYTE()) != EOF)
-    PUTBYTE(c);
-}
-
-
-/*
- * JPEG markers consist of one or more 0xFF bytes, followed by a marker
- * code byte (which is not an FF).  Here are the marker codes of interest
- * in this program.  (See jdmarker.c for a more complete list.)
- */
-
-#define M_SOF0  0xC0		/* Start Of Frame N */
-#define M_SOF1  0xC1		/* N indicates which compression process */
-#define M_SOF2  0xC2		/* Only SOF0-SOF2 are now in common use */
-#define M_SOF3  0xC3
-#define M_SOF5  0xC5		/* NB: codes C4 and CC are NOT SOF markers */
-#define M_SOF6  0xC6
-#define M_SOF7  0xC7
-#define M_SOF9  0xC9
-#define M_SOF10 0xCA
-#define M_SOF11 0xCB
-#define M_SOF13 0xCD
-#define M_SOF14 0xCE
-#define M_SOF15 0xCF
-#define M_SOI   0xD8		/* Start Of Image (beginning of datastream) */
-#define M_EOI   0xD9		/* End Of Image (end of datastream) */
-#define M_SOS   0xDA		/* Start Of Scan (begins compressed data) */
-#define M_COM   0xFE		/* COMment */
-
-
-/*
- * Find the next JPEG marker and return its marker code.
- * We expect at least one FF byte, possibly more if the compressor used FFs
- * to pad the file.  (Padding FFs will NOT be replicated in the output file.)
- * There could also be non-FF garbage between markers.  The treatment of such
- * garbage is unspecified; we choose to skip over it but emit a warning msg.
- * NB: this routine must not be used after seeing SOS marker, since it will
- * not deal correctly with FF/00 sequences in the compressed image data...
- */
-
-static int
-next_marker (void)
-{
-  int c;
-  int discarded_bytes = 0;
-
-  /* Find 0xFF byte; count and skip any non-FFs. */
-  c = read_1_byte();
-  while (c != 0xFF) {
-    discarded_bytes++;
-    c = read_1_byte();
-  }
-  /* Get marker code byte, swallowing any duplicate FF bytes.  Extra FFs
-   * are legal as pad bytes, so don't count them in discarded_bytes.
-   */
-  do {
-    c = read_1_byte();
-  } while (c == 0xFF);
-
-  if (discarded_bytes != 0) {
-    fprintf(stderr, "Warning: garbage data found in JPEG file\n");
-  }
-
-  return c;
-}
-
-
-/*
- * Read the initial marker, which should be SOI.
- * For a JFIF file, the first two bytes of the file should be literally
- * 0xFF M_SOI.  To be more general, we could use next_marker, but if the
- * input file weren't actually JPEG at all, next_marker might read the whole
- * file and then return a misleading error message...
- */
-
-static int
-first_marker (void)
-{
-  int c1, c2;
-
-  c1 = NEXTBYTE();
-  c2 = NEXTBYTE();
-  if (c1 != 0xFF || c2 != M_SOI)
-    ERREXIT("Not a JPEG file");
-  return c2;
-}
-
-
-/*
- * Most types of marker are followed by a variable-length parameter segment.
- * This routine skips over the parameters for any marker we don't otherwise
- * want to process.
- * Note that we MUST skip the parameter segment explicitly in order not to
- * be fooled by 0xFF bytes that might appear within the parameter segment;
- * such bytes do NOT introduce new markers.
- */
-
-static void
-copy_variable (void)
-/* Copy an unknown or uninteresting variable-length marker */
-{
-  unsigned int length;
-
-  /* Get the marker parameter length count */
-  length = read_2_bytes();
-  write_2_bytes(length);
-  /* Length includes itself, so must be at least 2 */
-  if (length < 2)
-    ERREXIT("Erroneous JPEG marker length");
-  length -= 2;
-  /* Skip over the remaining bytes */
-  while (length > 0) {
-    write_1_byte(read_1_byte());
-    length--;
-  }
-}
-
-static void
-skip_variable (void)
-/* Skip over an unknown or uninteresting variable-length marker */
-{
-  unsigned int length;
-
-  /* Get the marker parameter length count */
-  length = read_2_bytes();
-  /* Length includes itself, so must be at least 2 */
-  if (length < 2)
-    ERREXIT("Erroneous JPEG marker length");
-  length -= 2;
-  /* Skip over the remaining bytes */
-  while (length > 0) {
-    (void) read_1_byte();
-    length--;
-  }
-}
-
-
-/*
- * Parse the marker stream until SOFn or EOI is seen;
- * copy data to output, but discard COM markers unless keep_COM is true.
- */
-
-static int
-scan_JPEG_header (int keep_COM)
-{
-  int marker;
-
-  /* Expect SOI at start of file */
-  if (first_marker() != M_SOI)
-    ERREXIT("Expected SOI marker first");
-  write_marker(M_SOI);
-
-  /* Scan miscellaneous markers until we reach SOFn. */
-  for (;;) {
-    marker = next_marker();
-    switch (marker) {
-      /* Note that marker codes 0xC4, 0xC8, 0xCC are not, and must not be,
-       * treated as SOFn.  C4 in particular is actually DHT.
-       */
-    case M_SOF0:		/* Baseline */
-    case M_SOF1:		/* Extended sequential, Huffman */
-    case M_SOF2:		/* Progressive, Huffman */
-    case M_SOF3:		/* Lossless, Huffman */
-    case M_SOF5:		/* Differential sequential, Huffman */
-    case M_SOF6:		/* Differential progressive, Huffman */
-    case M_SOF7:		/* Differential lossless, Huffman */
-    case M_SOF9:		/* Extended sequential, arithmetic */
-    case M_SOF10:		/* Progressive, arithmetic */
-    case M_SOF11:		/* Lossless, arithmetic */
-    case M_SOF13:		/* Differential sequential, arithmetic */
-    case M_SOF14:		/* Differential progressive, arithmetic */
-    case M_SOF15:		/* Differential lossless, arithmetic */
-      return marker;
-
-    case M_SOS:			/* should not see compressed data before SOF */
-      ERREXIT("SOS without prior SOFn");
-      break;
-
-    case M_EOI:			/* in case it's a tables-only JPEG stream */
-      return marker;
-
-    case M_COM:			/* Existing COM: conditionally discard */
-      if (keep_COM) {
-	write_marker(marker);
-	copy_variable();
-      } else {
-	skip_variable();
-      }
-      break;
-
-    default:			/* Anything else just gets copied */
-      write_marker(marker);
-      copy_variable();		/* we assume it has a parameter count... */
-      break;
-    }
-  } /* end loop */
-}
-
-
-/* Command line parsing code */
-
-static const char * progname;	/* program name for error messages */
-
-
-static void
-usage (void)
-/* complain about bad command line */
-{
-  fprintf(stderr, "wrjpgcom inserts a textual comment in a JPEG file.\n");
-  fprintf(stderr, "You can add to or replace any existing comment(s).\n");
-
-  fprintf(stderr, "Usage: %s [switches] ", progname);
-#ifdef TWO_FILE_COMMANDLINE
-  fprintf(stderr, "inputfile outputfile\n");
-#else
-  fprintf(stderr, "[inputfile]\n");
-#endif
-
-  fprintf(stderr, "Switches (names may be abbreviated):\n");
-  fprintf(stderr, "  -replace         Delete any existing comments\n");
-  fprintf(stderr, "  -comment \"text\"  Insert comment with given text\n");
-  fprintf(stderr, "  -cfile name      Read comment from named file\n");
-  fprintf(stderr, "Notice that you must put quotes around the comment text\n");
-  fprintf(stderr, "when you use -comment.\n");
-  fprintf(stderr, "If you do not give either -comment or -cfile on the command line,\n");
-  fprintf(stderr, "then the comment text is read from standard input.\n");
-  fprintf(stderr, "It can be multiple lines, up to %u characters total.\n",
-	  (unsigned int) MAX_COM_LENGTH);
-#ifndef TWO_FILE_COMMANDLINE
-  fprintf(stderr, "You must specify an input JPEG file name when supplying\n");
-  fprintf(stderr, "comment text from standard input.\n");
-#endif
-
-  exit(EXIT_FAILURE);
-}
-
-
-static int
-keymatch (char * arg, const char * keyword, int minchars)
-/* Case-insensitive matching of (possibly abbreviated) keyword switches. */
-/* keyword is the constant keyword (must be lower case already), */
-/* minchars is length of minimum legal abbreviation. */
-{
-  register int ca, ck;
-  register int nmatched = 0;
-
-  while ((ca = *arg++) != '\0') {
-    if ((ck = *keyword++) == '\0')
-      return 0;			/* arg longer than keyword, no good */
-    if (isupper(ca))		/* force arg to lcase (assume ck is already) */
-      ca = tolower(ca);
-    if (ca != ck)
-      return 0;			/* no good */
-    nmatched++;			/* count matched characters */
-  }
-  /* reached end of argument; fail if it's too short for unique abbrev */
-  if (nmatched < minchars)
-    return 0;
-  return 1;			/* A-OK */
-}
-
-
-/*
- * The main program.
- */
-
-int
-main (int argc, char **argv)
-{
-  int argn;
-  char * arg;
-  int keep_COM = 1;
-  char * comment_arg = NULL;
-  FILE * comment_file = NULL;
-  unsigned int comment_length = 0;
-  int marker;
-
-  /* On Mac, fetch a command line. */
-#ifdef USE_CCOMMAND
-  argc = ccommand(&argv);
-#endif
-
-  progname = argv[0];
-  if (progname == NULL || progname[0] == 0)
-    progname = "wrjpgcom";	/* in case C library doesn't provide it */
-
-  /* Parse switches, if any */
-  for (argn = 1; argn < argc; argn++) {
-    arg = argv[argn];
-    if (arg[0] != '-')
-      break;			/* not switch, must be file name */
-    arg++;			/* advance over '-' */
-    if (keymatch(arg, "replace", 1)) {
-      keep_COM = 0;
-    } else if (keymatch(arg, "cfile", 2)) {
-      if (++argn >= argc) usage();
-      if ((comment_file = fopen(argv[argn], "r")) == NULL) {
-	fprintf(stderr, "%s: can't open %s\n", progname, argv[argn]);
-	exit(EXIT_FAILURE);
-      }
-    } else if (keymatch(arg, "comment", 1)) {
-      if (++argn >= argc) usage();
-      comment_arg = argv[argn];
-      /* If the comment text starts with '"', then we are probably running
-       * under MS-DOG and must parse out the quoted string ourselves.  Sigh.
-       */
-      if (comment_arg[0] == '"') {
-	comment_arg = (char *) malloc((size_t) MAX_COM_LENGTH);
-	if (comment_arg == NULL)
-	  ERREXIT("Insufficient memory");
-	strcpy(comment_arg, argv[argn]+1);
-	for (;;) {
-	  comment_length = (unsigned int) strlen(comment_arg);
-	  if (comment_length > 0 && comment_arg[comment_length-1] == '"') {
-	    comment_arg[comment_length-1] = '\0'; /* zap terminating quote */
-	    break;
-	  }
-	  if (++argn >= argc)
-	    ERREXIT("Missing ending quote mark");
-	  strcat(comment_arg, " ");
-	  strcat(comment_arg, argv[argn]);
-	}
-      }
-      comment_length = (unsigned int) strlen(comment_arg);
-    } else
-      usage();
-  }
-
-  /* Cannot use both -comment and -cfile. */
-  if (comment_arg != NULL && comment_file != NULL)
-    usage();
-  /* If there is neither -comment nor -cfile, we will read the comment text
-   * from stdin; in this case there MUST be an input JPEG file name.
-   */
-  if (comment_arg == NULL && comment_file == NULL && argn >= argc)
-    usage();
-
-  /* Open the input file. */
-  if (argn < argc) {
-    if ((infile = fopen(argv[argn], READ_BINARY)) == NULL) {
-      fprintf(stderr, "%s: can't open %s\n", progname, argv[argn]);
-      exit(EXIT_FAILURE);
-    }
-  } else {
-    /* default input file is stdin */
-#ifdef USE_SETMODE		/* need to hack file mode? */
-    setmode(fileno(stdin), O_BINARY);
-#endif
-#ifdef USE_FDOPEN		/* need to re-open in binary mode? */
-    if ((infile = fdopen(fileno(stdin), READ_BINARY)) == NULL) {
-      fprintf(stderr, "%s: can't open stdin\n", progname);
-      exit(EXIT_FAILURE);
-    }
-#else
-    infile = stdin;
-#endif
-  }
-
-  /* Open the output file. */
-#ifdef TWO_FILE_COMMANDLINE
-  /* Must have explicit output file name */
-  if (argn != argc-2) {
-    fprintf(stderr, "%s: must name one input and one output file\n",
-	    progname);
-    usage();
-  }
-  if ((outfile = fopen(argv[argn+1], WRITE_BINARY)) == NULL) {
-    fprintf(stderr, "%s: can't open %s\n", progname, argv[argn+1]);
-    exit(EXIT_FAILURE);
-  }
-#else
-  /* Unix style: expect zero or one file name */
-  if (argn < argc-1) {
-    fprintf(stderr, "%s: only one input file\n", progname);
-    usage();
-  }
-  /* default output file is stdout */
-#ifdef USE_SETMODE		/* need to hack file mode? */
-  setmode(fileno(stdout), O_BINARY);
-#endif
-#ifdef USE_FDOPEN		/* need to re-open in binary mode? */
-  if ((outfile = fdopen(fileno(stdout), WRITE_BINARY)) == NULL) {
-    fprintf(stderr, "%s: can't open stdout\n", progname);
-    exit(EXIT_FAILURE);
-  }
-#else
-  outfile = stdout;
-#endif
-#endif /* TWO_FILE_COMMANDLINE */
-
-  /* Collect comment text from comment_file or stdin, if necessary */
-  if (comment_arg == NULL) {
-    FILE * src_file;
-    int c;
-
-    comment_arg = (char *) malloc((size_t) MAX_COM_LENGTH);
-    if (comment_arg == NULL)
-      ERREXIT("Insufficient memory");
-    comment_length = 0;
-    src_file = (comment_file != NULL ? comment_file : stdin);
-    while ((c = getc(src_file)) != EOF) {
-      if (comment_length >= (unsigned int) MAX_COM_LENGTH) {
-	fprintf(stderr, "Comment text may not exceed %u bytes\n",
-		(unsigned int) MAX_COM_LENGTH);
-	exit(EXIT_FAILURE);
-      }
-      comment_arg[comment_length++] = (char) c;
-    }
-    if (comment_file != NULL)
-      fclose(comment_file);
-  }
-
-  /* Copy JPEG headers until SOFn marker;
-   * we will insert the new comment marker just before SOFn.
-   * This (a) causes the new comment to appear after, rather than before,
-   * existing comments; and (b) ensures that comments come after any JFIF
-   * or JFXX markers, as required by the JFIF specification.
-   */
-  marker = scan_JPEG_header(keep_COM);
-  /* Insert the new COM marker, but only if nonempty text has been supplied */
-  if (comment_length > 0) {
-    write_marker(M_COM);
-    write_2_bytes(comment_length + 2);
-    while (comment_length > 0) {
-      write_1_byte(*comment_arg++);
-      comment_length--;
-    }
-  }
-  /* Duplicate the remainder of the source file.
-   * Note that any COM markers occuring after SOF will not be touched.
-   */
-  write_marker(marker);
-  copy_rest_of_file();
-
-  /* All done. */
-  exit(EXIT_SUCCESS);
-  return 0;			/* suppress no-return-value warnings */
-}

Engine/lib/ljpeg/extras/wrppm.c

@@ -1,268 +0,0 @@
-/*
- * wrppm.c
- *
- * Copyright (C) 1991-1996, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains routines to write output images in PPM/PGM format.
- * The extended 2-byte-per-sample raw PPM/PGM formats are supported.
- * The PBMPLUS library is NOT required to compile this software
- * (but it is highly useful as a set of PPM image manipulation programs).
- *
- * These routines may need modification for non-Unix environments or
- * specialized applications.  As they stand, they assume output to
- * an ordinary stdio stream.
- */
-
-#include "cdjpeg.h"		/* Common decls for cjpeg/djpeg applications */
-
-#ifdef PPM_SUPPORTED
-
-
-/*
- * For 12-bit JPEG data, we either downscale the values to 8 bits
- * (to write standard byte-per-sample PPM/PGM files), or output
- * nonstandard word-per-sample PPM/PGM files.  Downscaling is done
- * if PPM_NORAWWORD is defined (this can be done in the Makefile
- * or in jconfig.h).
- * (When the core library supports data precision reduction, a cleaner
- * implementation will be to ask for that instead.)
- */
-
-#if BITS_IN_JSAMPLE == 8
-#define PUTPPMSAMPLE(ptr,v)  *ptr++ = (char) (v)
-#define BYTESPERSAMPLE 1
-#define PPM_MAXVAL 255
-#else
-#ifdef PPM_NORAWWORD
-#define PUTPPMSAMPLE(ptr,v)  *ptr++ = (char) ((v) >> (BITS_IN_JSAMPLE-8))
-#define BYTESPERSAMPLE 1
-#define PPM_MAXVAL 255
-#else
-/* The word-per-sample format always puts the LSB first. */
-#define PUTPPMSAMPLE(ptr,v)			\
-	{ register int val_ = v;		\
-	  *ptr++ = (char) (val_ & 0xFF);	\
-	  *ptr++ = (char) ((val_ >> 8) & 0xFF);	\
-	}
-#define BYTESPERSAMPLE 2
-#define PPM_MAXVAL ((1<<BITS_IN_JSAMPLE)-1)
-#endif
-#endif
-
-
-/*
- * When JSAMPLE is the same size as char, we can just fwrite() the
- * decompressed data to the PPM or PGM file.  On PCs, in order to make this
- * work the output buffer must be allocated in near data space, because we are
- * assuming small-data memory model wherein fwrite() can't reach far memory.
- * If you need to process very wide images on a PC, you might have to compile
- * in large-memory model, or else replace fwrite() with a putc() loop ---
- * which will be much slower.
- */
-
-
-/* Private version of data destination object */
-
-typedef struct {
-  struct djpeg_dest_struct pub;	/* public fields */
-
-  /* Usually these two pointers point to the same place: */
-  char *iobuffer;		/* fwrite's I/O buffer */
-  JSAMPROW pixrow;		/* decompressor output buffer */
-  size_t buffer_width;		/* width of I/O buffer */
-  JDIMENSION samples_per_row;	/* JSAMPLEs per output row */
-} ppm_dest_struct;
-
-typedef ppm_dest_struct * ppm_dest_ptr;
-
-
-/*
- * Write some pixel data.
- * In this module rows_supplied will always be 1.
- *
- * put_pixel_rows handles the "normal" 8-bit case where the decompressor
- * output buffer is physically the same as the fwrite buffer.
- */
-
-METHODDEF(void)
-put_pixel_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo,
-		JDIMENSION rows_supplied)
-{
-  ppm_dest_ptr dest = (ppm_dest_ptr) dinfo;
-
-  (void) JFWRITE(dest->pub.output_file, dest->iobuffer, dest->buffer_width);
-}
-
-
-/*
- * This code is used when we have to copy the data and apply a pixel
- * format translation.  Typically this only happens in 12-bit mode.
- */
-
-METHODDEF(void)
-copy_pixel_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo,
-		 JDIMENSION rows_supplied)
-{
-  ppm_dest_ptr dest = (ppm_dest_ptr) dinfo;
-  register char * bufferptr;
-  register JSAMPROW ptr;
-  register JDIMENSION col;
-
-  ptr = dest->pub.buffer[0];
-  bufferptr = dest->iobuffer;
-  for (col = dest->samples_per_row; col > 0; col--) {
-    PUTPPMSAMPLE(bufferptr, GETJSAMPLE(*ptr++));
-  }
-  (void) JFWRITE(dest->pub.output_file, dest->iobuffer, dest->buffer_width);
-}
-
-
-/*
- * Write some pixel data when color quantization is in effect.
- * We have to demap the color index values to straight data.
- */
-
-METHODDEF(void)
-put_demapped_rgb (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo,
-		  JDIMENSION rows_supplied)
-{
-  ppm_dest_ptr dest = (ppm_dest_ptr) dinfo;
-  register char * bufferptr;
-  register int pixval;
-  register JSAMPROW ptr;
-  register JSAMPROW color_map0 = cinfo->colormap[0];
-  register JSAMPROW color_map1 = cinfo->colormap[1];
-  register JSAMPROW color_map2 = cinfo->colormap[2];
-  register JDIMENSION col;
-
-  ptr = dest->pub.buffer[0];
-  bufferptr = dest->iobuffer;
-  for (col = cinfo->output_width; col > 0; col--) {
-    pixval = GETJSAMPLE(*ptr++);
-    PUTPPMSAMPLE(bufferptr, GETJSAMPLE(color_map0[pixval]));
-    PUTPPMSAMPLE(bufferptr, GETJSAMPLE(color_map1[pixval]));
-    PUTPPMSAMPLE(bufferptr, GETJSAMPLE(color_map2[pixval]));
-  }
-  (void) JFWRITE(dest->pub.output_file, dest->iobuffer, dest->buffer_width);
-}
-
-
-METHODDEF(void)
-put_demapped_gray (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo,
-		   JDIMENSION rows_supplied)
-{
-  ppm_dest_ptr dest = (ppm_dest_ptr) dinfo;
-  register char * bufferptr;
-  register JSAMPROW ptr;
-  register JSAMPROW color_map = cinfo->colormap[0];
-  register JDIMENSION col;
-
-  ptr = dest->pub.buffer[0];
-  bufferptr = dest->iobuffer;
-  for (col = cinfo->output_width; col > 0; col--) {
-    PUTPPMSAMPLE(bufferptr, GETJSAMPLE(color_map[GETJSAMPLE(*ptr++)]));
-  }
-  (void) JFWRITE(dest->pub.output_file, dest->iobuffer, dest->buffer_width);
-}
-
-
-/*
- * Startup: write the file header.
- */
-
-METHODDEF(void)
-start_output_ppm (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo)
-{
-  ppm_dest_ptr dest = (ppm_dest_ptr) dinfo;
-
-  /* Emit file header */
-  switch (cinfo->out_color_space) {
-  case JCS_GRAYSCALE:
-    /* emit header for raw PGM format */
-    fprintf(dest->pub.output_file, "P5\n%ld %ld\n%d\n",
-	    (long) cinfo->output_width, (long) cinfo->output_height,
-	    PPM_MAXVAL);
-    break;
-  case JCS_RGB:
-    /* emit header for raw PPM format */
-    fprintf(dest->pub.output_file, "P6\n%ld %ld\n%d\n",
-	    (long) cinfo->output_width, (long) cinfo->output_height,
-	    PPM_MAXVAL);
-    break;
-  default:
-    ERREXIT(cinfo, JERR_PPM_COLORSPACE);
-  }
-}
-
-
-/*
- * Finish up at the end of the file.
- */
-
-METHODDEF(void)
-finish_output_ppm (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo)
-{
-  /* Make sure we wrote the output file OK */
-  fflush(dinfo->output_file);
-  if (ferror(dinfo->output_file))
-    ERREXIT(cinfo, JERR_FILE_WRITE);
-}
-
-
-/*
- * The module selection routine for PPM format output.
- */
-
-GLOBAL(djpeg_dest_ptr)
-jinit_write_ppm (j_decompress_ptr cinfo)
-{
-  ppm_dest_ptr dest;
-
-  /* Create module interface object, fill in method pointers */
-  dest = (ppm_dest_ptr)
-      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				  SIZEOF(ppm_dest_struct));
-  dest->pub.start_output = start_output_ppm;
-  dest->pub.finish_output = finish_output_ppm;
-
-  /* Calculate output image dimensions so we can allocate space */
-  jpeg_calc_output_dimensions(cinfo);
-
-  /* Create physical I/O buffer.  Note we make this near on a PC. */
-  dest->samples_per_row = cinfo->output_width * cinfo->out_color_components;
-  dest->buffer_width = dest->samples_per_row * (BYTESPERSAMPLE * SIZEOF(char));
-  dest->iobuffer = (char *) (*cinfo->mem->alloc_small)
-    ((j_common_ptr) cinfo, JPOOL_IMAGE, dest->buffer_width);
-
-  if (cinfo->quantize_colors || BITS_IN_JSAMPLE != 8 ||
-      SIZEOF(JSAMPLE) != SIZEOF(char)) {
-    /* When quantizing, we need an output buffer for colormap indexes
-     * that's separate from the physical I/O buffer.  We also need a
-     * separate buffer if pixel format translation must take place.
-     */
-    dest->pub.buffer = (*cinfo->mem->alloc_sarray)
-      ((j_common_ptr) cinfo, JPOOL_IMAGE,
-       cinfo->output_width * cinfo->output_components, (JDIMENSION) 1);
-    dest->pub.buffer_height = 1;
-    if (! cinfo->quantize_colors)
-      dest->pub.put_pixel_rows = copy_pixel_rows;
-    else if (cinfo->out_color_space == JCS_GRAYSCALE)
-      dest->pub.put_pixel_rows = put_demapped_gray;
-    else
-      dest->pub.put_pixel_rows = put_demapped_rgb;
-  } else {
-    /* We will fwrite() directly from decompressor output buffer. */
-    /* Synthesize a JSAMPARRAY pointer structure */
-    /* Cast here implies near->far pointer conversion on PCs */
-    dest->pixrow = (JSAMPROW) dest->iobuffer;
-    dest->pub.buffer = & dest->pixrow;
-    dest->pub.buffer_height = 1;
-    dest->pub.put_pixel_rows = put_pixel_rows;
-  }
-
-  return (djpeg_dest_ptr) dest;
-}
-
-#endif /* PPM_SUPPORTED */

Engine/lib/ljpeg/extras/wrrle.c

@@ -1,305 +0,0 @@
-/*
- * wrrle.c
- *
- * Copyright (C) 1991-1996, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains routines to write output images in RLE format.
- * The Utah Raster Toolkit library is required (version 3.1 or later).
- *
- * These routines may need modification for non-Unix environments or
- * specialized applications.  As they stand, they assume output to
- * an ordinary stdio stream.
- *
- * Based on code contributed by Mike Lijewski,
- * with updates from Robert Hutchinson.
- */
-
-#include "cdjpeg.h"		/* Common decls for cjpeg/djpeg applications */
-
-#ifdef RLE_SUPPORTED
-
-/* rle.h is provided by the Utah Raster Toolkit. */
-
-#include <rle.h>
-
-/*
- * We assume that JSAMPLE has the same representation as rle_pixel,
- * to wit, "unsigned char".  Hence we can't cope with 12- or 16-bit samples.
- */
-
-#if BITS_IN_JSAMPLE != 8
-  Sorry, this code only copes with 8-bit JSAMPLEs. /* deliberate syntax err */
-#endif
-
-
-/*
- * Since RLE stores scanlines bottom-to-top, we have to invert the image
- * from JPEG's top-to-bottom order.  To do this, we save the outgoing data
- * in a virtual array during put_pixel_row calls, then actually emit the
- * RLE file during finish_output.
- */
-
-
-/*
- * For now, if we emit an RLE color map then it is always 256 entries long,
- * though not all of the entries need be used.
- */
-
-#define CMAPBITS	8
-#define CMAPLENGTH	(1<<(CMAPBITS))
-
-typedef struct {
-  struct djpeg_dest_struct pub; /* public fields */
-
-  jvirt_sarray_ptr image;	/* virtual array to store the output image */
-  rle_map *colormap;	 	/* RLE-style color map, or NULL if none */
-  rle_pixel **rle_row;		/* To pass rows to rle_putrow() */
-
-} rle_dest_struct;
-
-typedef rle_dest_struct * rle_dest_ptr;
-
-/* Forward declarations */
-METHODDEF(void) rle_put_pixel_rows
-    JPP((j_decompress_ptr cinfo, djpeg_dest_ptr dinfo,
-	 JDIMENSION rows_supplied));
-
-
-/*
- * Write the file header.
- *
- * In this module it's easier to wait till finish_output to write anything.
- */
-
-METHODDEF(void)
-start_output_rle (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo)
-{
-  rle_dest_ptr dest = (rle_dest_ptr) dinfo;
-  size_t cmapsize;
-  int i, ci;
-#ifdef PROGRESS_REPORT
-  cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress;
-#endif
-
-  /*
-   * Make sure the image can be stored in RLE format.
-   *
-   * - RLE stores image dimensions as *signed* 16 bit integers.  JPEG
-   *   uses unsigned, so we have to check the width.
-   *
-   * - Colorspace is expected to be grayscale or RGB.
-   *
-   * - The number of channels (components) is expected to be 1 (grayscale/
-   *   pseudocolor) or 3 (truecolor/directcolor).
-   *   (could be 2 or 4 if using an alpha channel, but we aren't)
-   */
-
-  if (cinfo->output_width > 32767 || cinfo->output_height > 32767)
-    ERREXIT2(cinfo, JERR_RLE_DIMENSIONS, cinfo->output_width, 
-	     cinfo->output_height);
-
-  if (cinfo->out_color_space != JCS_GRAYSCALE &&
-      cinfo->out_color_space != JCS_RGB)
-    ERREXIT(cinfo, JERR_RLE_COLORSPACE);
-
-  if (cinfo->output_components != 1 && cinfo->output_components != 3)
-    ERREXIT1(cinfo, JERR_RLE_TOOMANYCHANNELS, cinfo->num_components);
-
-  /* Convert colormap, if any, to RLE format. */
-
-  dest->colormap = NULL;
-
-  if (cinfo->quantize_colors) {
-    /* Allocate storage for RLE-style cmap, zero any extra entries */
-    cmapsize = cinfo->out_color_components * CMAPLENGTH * SIZEOF(rle_map);
-    dest->colormap = (rle_map *) (*cinfo->mem->alloc_small)
-      ((j_common_ptr) cinfo, JPOOL_IMAGE, cmapsize);
-    MEMZERO(dest->colormap, cmapsize);
-
-    /* Save away data in RLE format --- note 8-bit left shift! */
-    /* Shifting would need adjustment for JSAMPLEs wider than 8 bits. */
-    for (ci = 0; ci < cinfo->out_color_components; ci++) {
-      for (i = 0; i < cinfo->actual_number_of_colors; i++) {
-        dest->colormap[ci * CMAPLENGTH + i] =
-          GETJSAMPLE(cinfo->colormap[ci][i]) << 8;
-      }
-    }
-  }
-
-  /* Set the output buffer to the first row */
-  dest->pub.buffer = (*cinfo->mem->access_virt_sarray)
-    ((j_common_ptr) cinfo, dest->image, (JDIMENSION) 0, (JDIMENSION) 1, TRUE);
-  dest->pub.buffer_height = 1;
-
-  dest->pub.put_pixel_rows = rle_put_pixel_rows;
-
-#ifdef PROGRESS_REPORT
-  if (progress != NULL) {
-    progress->total_extra_passes++;  /* count file writing as separate pass */
-  }
-#endif
-}
-
-
-/*
- * Write some pixel data.
- *
- * This routine just saves the data away in a virtual array.
- */
-
-METHODDEF(void)
-rle_put_pixel_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo,
-		    JDIMENSION rows_supplied)
-{
-  rle_dest_ptr dest = (rle_dest_ptr) dinfo;
-
-  if (cinfo->output_scanline < cinfo->output_height) {
-    dest->pub.buffer = (*cinfo->mem->access_virt_sarray)
-      ((j_common_ptr) cinfo, dest->image,
-       cinfo->output_scanline, (JDIMENSION) 1, TRUE);
-  }
-}
-
-/*
- * Finish up at the end of the file.
- *
- * Here is where we really output the RLE file.
- */
-
-METHODDEF(void)
-finish_output_rle (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo)
-{
-  rle_dest_ptr dest = (rle_dest_ptr) dinfo;
-  rle_hdr header;		/* Output file information */
-  rle_pixel **rle_row, *red, *green, *blue;
-  JSAMPROW output_row;
-  char cmapcomment[80];
-  int row, col;
-  int ci;
-#ifdef PROGRESS_REPORT
-  cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress;
-#endif
-
-  /* Initialize the header info */
-  header = *rle_hdr_init(NULL);
-  header.rle_file = dest->pub.output_file;
-  header.xmin     = 0;
-  header.xmax     = cinfo->output_width  - 1;
-  header.ymin     = 0;
-  header.ymax     = cinfo->output_height - 1;
-  header.alpha    = 0;
-  header.ncolors  = cinfo->output_components;
-  for (ci = 0; ci < cinfo->output_components; ci++) {
-    RLE_SET_BIT(header, ci);
-  }
-  if (cinfo->quantize_colors) {
-    header.ncmap   = cinfo->out_color_components;
-    header.cmaplen = CMAPBITS;
-    header.cmap    = dest->colormap;
-    /* Add a comment to the output image with the true colormap length. */
-    sprintf(cmapcomment, "color_map_length=%d", cinfo->actual_number_of_colors);
-    rle_putcom(cmapcomment, &header);
-  }
-
-  /* Emit the RLE header and color map (if any) */
-  rle_put_setup(&header);
-
-  /* Now output the RLE data from our virtual array.
-   * We assume here that (a) rle_pixel is represented the same as JSAMPLE,
-   * and (b) we are not on a machine where FAR pointers differ from regular.
-   */
-
-#ifdef PROGRESS_REPORT
-  if (progress != NULL) {
-    progress->pub.pass_limit = cinfo->output_height;
-    progress->pub.pass_counter = 0;
-    (*progress->pub.progress_monitor) ((j_common_ptr) cinfo);
-  }
-#endif
-
-  if (cinfo->output_components == 1) {
-    for (row = cinfo->output_height-1; row >= 0; row--) {
-      rle_row = (rle_pixel **) (*cinfo->mem->access_virt_sarray)
-        ((j_common_ptr) cinfo, dest->image,
-	 (JDIMENSION) row, (JDIMENSION) 1, FALSE);
-      rle_putrow(rle_row, (int) cinfo->output_width, &header);
-#ifdef PROGRESS_REPORT
-      if (progress != NULL) {
-        progress->pub.pass_counter++;
-        (*progress->pub.progress_monitor) ((j_common_ptr) cinfo);
-      }
-#endif
-    }
-  } else {
-    for (row = cinfo->output_height-1; row >= 0; row--) {
-      rle_row = (rle_pixel **) dest->rle_row;
-      output_row = * (*cinfo->mem->access_virt_sarray)
-        ((j_common_ptr) cinfo, dest->image,
-	 (JDIMENSION) row, (JDIMENSION) 1, FALSE);
-      red = rle_row[0];
-      green = rle_row[1];
-      blue = rle_row[2];
-      for (col = cinfo->output_width; col > 0; col--) {
-        *red++ = GETJSAMPLE(*output_row++);
-        *green++ = GETJSAMPLE(*output_row++);
-        *blue++ = GETJSAMPLE(*output_row++);
-      }
-      rle_putrow(rle_row, (int) cinfo->output_width, &header);
-#ifdef PROGRESS_REPORT
-      if (progress != NULL) {
-        progress->pub.pass_counter++;
-        (*progress->pub.progress_monitor) ((j_common_ptr) cinfo);
-      }
-#endif
-    }
-  }
-
-#ifdef PROGRESS_REPORT
-  if (progress != NULL)
-    progress->completed_extra_passes++;
-#endif
-
-  /* Emit file trailer */
-  rle_puteof(&header);
-  fflush(dest->pub.output_file);
-  if (ferror(dest->pub.output_file))
-    ERREXIT(cinfo, JERR_FILE_WRITE);
-}
-
-
-/*
- * The module selection routine for RLE format output.
- */
-
-GLOBAL(djpeg_dest_ptr)
-jinit_write_rle (j_decompress_ptr cinfo)
-{
-  rle_dest_ptr dest;
-
-  /* Create module interface object, fill in method pointers */
-  dest = (rle_dest_ptr)
-      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-                                  SIZEOF(rle_dest_struct));
-  dest->pub.start_output = start_output_rle;
-  dest->pub.finish_output = finish_output_rle;
-
-  /* Calculate output image dimensions so we can allocate space */
-  jpeg_calc_output_dimensions(cinfo);
-
-  /* Allocate a work array for output to the RLE library. */
-  dest->rle_row = (*cinfo->mem->alloc_sarray)
-    ((j_common_ptr) cinfo, JPOOL_IMAGE,
-     cinfo->output_width, (JDIMENSION) cinfo->output_components);
-
-  /* Allocate a virtual array to hold the image. */
-  dest->image = (*cinfo->mem->request_virt_sarray)
-    ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE,
-     (JDIMENSION) (cinfo->output_width * cinfo->output_components),
-     cinfo->output_height, (JDIMENSION) 1);
-
-  return (djpeg_dest_ptr) dest;
-}
-
-#endif /* RLE_SUPPORTED */

Engine/lib/ljpeg/extras/wrtarga.c

@@ -1,253 +0,0 @@
-/*
- * wrtarga.c
- *
- * Copyright (C) 1991-1996, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains routines to write output images in Targa format.
- *
- * These routines may need modification for non-Unix environments or
- * specialized applications.  As they stand, they assume output to
- * an ordinary stdio stream.
- *
- * Based on code contributed by Lee Daniel Crocker.
- */
-
-#include "cdjpeg.h"		/* Common decls for cjpeg/djpeg applications */
-
-#ifdef TARGA_SUPPORTED
-
-
-/*
- * To support 12-bit JPEG data, we'd have to scale output down to 8 bits.
- * This is not yet implemented.
- */
-
-#if BITS_IN_JSAMPLE != 8
-  Sorry, this code only copes with 8-bit JSAMPLEs. /* deliberate syntax err */
-#endif
-
-/*
- * The output buffer needs to be writable by fwrite().  On PCs, we must
- * allocate the buffer in near data space, because we are assuming small-data
- * memory model, wherein fwrite() can't reach far memory.  If you need to
- * process very wide images on a PC, you might have to compile in large-memory
- * model, or else replace fwrite() with a putc() loop --- which will be much
- * slower.
- */
-
-
-/* Private version of data destination object */
-
-typedef struct {
-  struct djpeg_dest_struct pub;	/* public fields */
-
-  char *iobuffer;		/* physical I/O buffer */
-  JDIMENSION buffer_width;	/* width of one row */
-} tga_dest_struct;
-
-typedef tga_dest_struct * tga_dest_ptr;
-
-
-LOCAL(void)
-write_header (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, int num_colors)
-/* Create and write a Targa header */
-{
-  char targaheader[18];
-
-  /* Set unused fields of header to 0 */
-  MEMZERO(targaheader, SIZEOF(targaheader));
-
-  if (num_colors > 0) {
-    targaheader[1] = 1;		/* color map type 1 */
-    targaheader[5] = (char) (num_colors & 0xFF);
-    targaheader[6] = (char) (num_colors >> 8);
-    targaheader[7] = 24;	/* 24 bits per cmap entry */
-  }
-
-  targaheader[12] = (char) (cinfo->output_width & 0xFF);
-  targaheader[13] = (char) (cinfo->output_width >> 8);
-  targaheader[14] = (char) (cinfo->output_height & 0xFF);
-  targaheader[15] = (char) (cinfo->output_height >> 8);
-  targaheader[17] = 0x20;	/* Top-down, non-interlaced */
-
-  if (cinfo->out_color_space == JCS_GRAYSCALE) {
-    targaheader[2] = 3;		/* image type = uncompressed gray-scale */
-    targaheader[16] = 8;	/* bits per pixel */
-  } else {			/* must be RGB */
-    if (num_colors > 0) {
-      targaheader[2] = 1;	/* image type = colormapped RGB */
-      targaheader[16] = 8;
-    } else {
-      targaheader[2] = 2;	/* image type = uncompressed RGB */
-      targaheader[16] = 24;
-    }
-  }
-
-  if (JFWRITE(dinfo->output_file, targaheader, 18) != (size_t) 18)
-    ERREXIT(cinfo, JERR_FILE_WRITE);
-}
-
-
-/*
- * Write some pixel data.
- * In this module rows_supplied will always be 1.
- */
-
-METHODDEF(void)
-put_pixel_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo,
-		JDIMENSION rows_supplied)
-/* used for unquantized full-color output */
-{
-  tga_dest_ptr dest = (tga_dest_ptr) dinfo;
-  register JSAMPROW inptr;
-  register char * outptr;
-  register JDIMENSION col;
-
-  inptr = dest->pub.buffer[0];
-  outptr = dest->iobuffer;
-  for (col = cinfo->output_width; col > 0; col--) {
-    outptr[0] = (char) GETJSAMPLE(inptr[2]); /* RGB to BGR order */
-    outptr[1] = (char) GETJSAMPLE(inptr[1]);
-    outptr[2] = (char) GETJSAMPLE(inptr[0]);
-    inptr += 3, outptr += 3;
-  }
-  (void) JFWRITE(dest->pub.output_file, dest->iobuffer, dest->buffer_width);
-}
-
-METHODDEF(void)
-put_gray_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo,
-	       JDIMENSION rows_supplied)
-/* used for grayscale OR quantized color output */
-{
-  tga_dest_ptr dest = (tga_dest_ptr) dinfo;
-  register JSAMPROW inptr;
-  register char * outptr;
-  register JDIMENSION col;
-
-  inptr = dest->pub.buffer[0];
-  outptr = dest->iobuffer;
-  for (col = cinfo->output_width; col > 0; col--) {
-    *outptr++ = (char) GETJSAMPLE(*inptr++);
-  }
-  (void) JFWRITE(dest->pub.output_file, dest->iobuffer, dest->buffer_width);
-}
-
-
-/*
- * Write some demapped pixel data when color quantization is in effect.
- * For Targa, this is only applied to grayscale data.
- */
-
-METHODDEF(void)
-put_demapped_gray (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo,
-		   JDIMENSION rows_supplied)
-{
-  tga_dest_ptr dest = (tga_dest_ptr) dinfo;
-  register JSAMPROW inptr;
-  register char * outptr;
-  register JSAMPROW color_map0 = cinfo->colormap[0];
-  register JDIMENSION col;
-
-  inptr = dest->pub.buffer[0];
-  outptr = dest->iobuffer;
-  for (col = cinfo->output_width; col > 0; col--) {
-    *outptr++ = (char) GETJSAMPLE(color_map0[GETJSAMPLE(*inptr++)]);
-  }
-  (void) JFWRITE(dest->pub.output_file, dest->iobuffer, dest->buffer_width);
-}
-
-
-/*
- * Startup: write the file header.
- */
-
-METHODDEF(void)
-start_output_tga (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo)
-{
-  tga_dest_ptr dest = (tga_dest_ptr) dinfo;
-  int num_colors, i;
-  FILE *outfile;
-
-  if (cinfo->out_color_space == JCS_GRAYSCALE) {
-    /* Targa doesn't have a mapped grayscale format, so we will */
-    /* demap quantized gray output.  Never emit a colormap. */
-    write_header(cinfo, dinfo, 0);
-    if (cinfo->quantize_colors)
-      dest->pub.put_pixel_rows = put_demapped_gray;
-    else
-      dest->pub.put_pixel_rows = put_gray_rows;
-  } else if (cinfo->out_color_space == JCS_RGB) {
-    if (cinfo->quantize_colors) {
-      /* We only support 8-bit colormap indexes, so only 256 colors */
-      num_colors = cinfo->actual_number_of_colors;
-      if (num_colors > 256)
-	ERREXIT1(cinfo, JERR_TOO_MANY_COLORS, num_colors);
-      write_header(cinfo, dinfo, num_colors);
-      /* Write the colormap.  Note Targa uses BGR byte order */
-      outfile = dest->pub.output_file;
-      for (i = 0; i < num_colors; i++) {
-	putc(GETJSAMPLE(cinfo->colormap[2][i]), outfile);
-	putc(GETJSAMPLE(cinfo->colormap[1][i]), outfile);
-	putc(GETJSAMPLE(cinfo->colormap[0][i]), outfile);
-      }
-      dest->pub.put_pixel_rows = put_gray_rows;
-    } else {
-      write_header(cinfo, dinfo, 0);
-      dest->pub.put_pixel_rows = put_pixel_rows;
-    }
-  } else {
-    ERREXIT(cinfo, JERR_TGA_COLORSPACE);
-  }
-}
-
-
-/*
- * Finish up at the end of the file.
- */
-
-METHODDEF(void)
-finish_output_tga (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo)
-{
-  /* Make sure we wrote the output file OK */
-  fflush(dinfo->output_file);
-  if (ferror(dinfo->output_file))
-    ERREXIT(cinfo, JERR_FILE_WRITE);
-}
-
-
-/*
- * The module selection routine for Targa format output.
- */
-
-GLOBAL(djpeg_dest_ptr)
-jinit_write_targa (j_decompress_ptr cinfo)
-{
-  tga_dest_ptr dest;
-
-  /* Create module interface object, fill in method pointers */
-  dest = (tga_dest_ptr)
-      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				  SIZEOF(tga_dest_struct));
-  dest->pub.start_output = start_output_tga;
-  dest->pub.finish_output = finish_output_tga;
-
-  /* Calculate output image dimensions so we can allocate space */
-  jpeg_calc_output_dimensions(cinfo);
-
-  /* Create I/O buffer.  Note we make this near on a PC. */
-  dest->buffer_width = cinfo->output_width * cinfo->output_components;
-  dest->iobuffer = (char *)
-    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				(size_t) (dest->buffer_width * SIZEOF(char)));
-
-  /* Create decompressor output buffer. */
-  dest->pub.buffer = (*cinfo->mem->alloc_sarray)
-    ((j_common_ptr) cinfo, JPOOL_IMAGE, dest->buffer_width, (JDIMENSION) 1);
-  dest->pub.buffer_height = 1;
-
-  return (djpeg_dest_ptr) dest;
-}
-
-#endif /* TARGA_SUPPORTED */

Engine/lib/ljpeg/jcapimin.c

@@ -1,280 +0,0 @@
-/*
- * jcapimin.c
- *
- * Copyright (C) 1994-1998, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains application interface code for the compression half
- * of the JPEG library.  These are the "minimum" API routines that may be
- * needed in either the normal full-compression case or the transcoding-only
- * case.
- *
- * Most of the routines intended to be called directly by an application
- * are in this file or in jcapistd.c.  But also see jcparam.c for
- * parameter-setup helper routines, jcomapi.c for routines shared by
- * compression and decompression, and jctrans.c for the transcoding case.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-
-
-/*
- * Initialization of a JPEG compression object.
- * The error manager must already be set up (in case memory manager fails).
- */
-
-GLOBAL(void)
-jpeg_CreateCompress (j_compress_ptr cinfo, int version, jpeg_size_t structsize)
-{
-  int i;
-
-  /* Guard against version mismatches between library and caller. */
-  cinfo->mem = NULL;		/* so jpeg_destroy knows mem mgr not called */
-  if (version != JPEG_LIB_VERSION)
-    ERREXIT2(cinfo, JERR_BAD_LIB_VERSION, JPEG_LIB_VERSION, version);
-  if (structsize != SIZEOF(struct jpeg_compress_struct))
-    ERREXIT2(cinfo, JERR_BAD_STRUCT_SIZE, 
-	     (int) SIZEOF(struct jpeg_compress_struct), (int) structsize);
-
-  /* For debugging purposes, we zero the whole master structure.
-   * But the application has already set the err pointer, and may have set
-   * client_data, so we have to save and restore those fields.
-   * Note: if application hasn't set client_data, tools like Purify may
-   * complain here.
-   */
-  {
-    struct jpeg_error_mgr * err = cinfo->err;
-    void * client_data = cinfo->client_data; /* ignore Purify complaint here */
-    MEMZERO(cinfo, SIZEOF(struct jpeg_compress_struct));
-    cinfo->err = err;
-    cinfo->client_data = client_data;
-  }
-  cinfo->is_decompressor = FALSE;
-
-  /* Initialize a memory manager instance for this object */
-  jinit_memory_mgr((j_common_ptr) cinfo);
-
-  /* Zero out pointers to permanent structures. */
-  cinfo->progress = NULL;
-  cinfo->dest = NULL;
-
-  cinfo->comp_info = NULL;
-
-  for (i = 0; i < NUM_QUANT_TBLS; i++)
-    cinfo->quant_tbl_ptrs[i] = NULL;
-
-  for (i = 0; i < NUM_HUFF_TBLS; i++) {
-    cinfo->dc_huff_tbl_ptrs[i] = NULL;
-    cinfo->ac_huff_tbl_ptrs[i] = NULL;
-  }
-
-  cinfo->script_space = NULL;
-
-  cinfo->input_gamma = 1.0;	/* in case application forgets */
-
-  /* OK, I'm ready */
-  cinfo->global_state = CSTATE_START;
-}
-
-
-/*
- * Destruction of a JPEG compression object
- */
-
-GLOBAL(void)
-jpeg_destroy_compress (j_compress_ptr cinfo)
-{
-  jpeg_destroy((j_common_ptr) cinfo); /* use common routine */
-}
-
-
-/*
- * Abort processing of a JPEG compression operation,
- * but don't destroy the object itself.
- */
-
-GLOBAL(void)
-jpeg_abort_compress (j_compress_ptr cinfo)
-{
-  jpeg_abort((j_common_ptr) cinfo); /* use common routine */
-}
-
-
-/*
- * Forcibly suppress or un-suppress all quantization and Huffman tables.
- * Marks all currently defined tables as already written (if suppress)
- * or not written (if !suppress).  This will control whether they get emitted
- * by a subsequent jpeg_start_compress call.
- *
- * This routine is exported for use by applications that want to produce
- * abbreviated JPEG datastreams.  It logically belongs in jcparam.c, but
- * since it is called by jpeg_start_compress, we put it here --- otherwise
- * jcparam.o would be linked whether the application used it or not.
- */
-
-GLOBAL(void)
-jpeg_suppress_tables (j_compress_ptr cinfo, boolean suppress)
-{
-  int i;
-  JQUANT_TBL * qtbl;
-  JHUFF_TBL * htbl;
-
-  for (i = 0; i < NUM_QUANT_TBLS; i++) {
-    if ((qtbl = cinfo->quant_tbl_ptrs[i]) != NULL)
-      qtbl->sent_table = suppress;
-  }
-
-  for (i = 0; i < NUM_HUFF_TBLS; i++) {
-    if ((htbl = cinfo->dc_huff_tbl_ptrs[i]) != NULL)
-      htbl->sent_table = suppress;
-    if ((htbl = cinfo->ac_huff_tbl_ptrs[i]) != NULL)
-      htbl->sent_table = suppress;
-  }
-}
-
-
-/*
- * Finish JPEG compression.
- *
- * If a multipass operating mode was selected, this may do a great deal of
- * work including most of the actual output.
- */
-
-GLOBAL(void)
-jpeg_finish_compress (j_compress_ptr cinfo)
-{
-  JDIMENSION iMCU_row;
-
-  if (cinfo->global_state == CSTATE_SCANNING ||
-      cinfo->global_state == CSTATE_RAW_OK) {
-    /* Terminate first pass */
-    if (cinfo->next_scanline < cinfo->image_height)
-      ERREXIT(cinfo, JERR_TOO_LITTLE_DATA);
-    (*cinfo->master->finish_pass) (cinfo);
-  } else if (cinfo->global_state != CSTATE_WRCOEFS)
-    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
-  /* Perform any remaining passes */
-  while (! cinfo->master->is_last_pass) {
-    (*cinfo->master->prepare_for_pass) (cinfo);
-    for (iMCU_row = 0; iMCU_row < cinfo->total_iMCU_rows; iMCU_row++) {
-      if (cinfo->progress != NULL) {
-	cinfo->progress->pass_counter = (long) iMCU_row;
-	cinfo->progress->pass_limit = (long) cinfo->total_iMCU_rows;
-	(*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo);
-      }
-      /* We bypass the main controller and invoke coef controller directly;
-       * all work is being done from the coefficient buffer.
-       */
-      if (! (*cinfo->coef->compress_data) (cinfo, (JSAMPIMAGE) NULL))
-	ERREXIT(cinfo, JERR_CANT_SUSPEND);
-    }
-    (*cinfo->master->finish_pass) (cinfo);
-  }
-  /* Write EOI, do final cleanup */
-  (*cinfo->marker->write_file_trailer) (cinfo);
-  (*cinfo->dest->term_destination) (cinfo);
-  /* We can use jpeg_abort to release memory and reset global_state */
-  jpeg_abort((j_common_ptr) cinfo);
-}
-
-
-/*
- * Write a special marker.
- * This is only recommended for writing COM or APPn markers.
- * Must be called after jpeg_start_compress() and before
- * first call to jpeg_write_scanlines() or jpeg_write_raw_data().
- */
-
-GLOBAL(void)
-jpeg_write_marker (j_compress_ptr cinfo, int marker,
-		   const JOCTET *dataptr, unsigned int datalen)
-{
-  JMETHOD(void, write_marker_byte, (j_compress_ptr info, int val));
-
-  if (cinfo->next_scanline != 0 ||
-      (cinfo->global_state != CSTATE_SCANNING &&
-       cinfo->global_state != CSTATE_RAW_OK &&
-       cinfo->global_state != CSTATE_WRCOEFS))
-    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
-
-  (*cinfo->marker->write_marker_header) (cinfo, marker, datalen);
-  write_marker_byte = cinfo->marker->write_marker_byte;	/* copy for speed */
-  while (datalen--) {
-    (*write_marker_byte) (cinfo, *dataptr);
-    dataptr++;
-  }
-}
-
-/* Same, but piecemeal. */
-
-GLOBAL(void)
-jpeg_write_m_header (j_compress_ptr cinfo, int marker, unsigned int datalen)
-{
-  if (cinfo->next_scanline != 0 ||
-      (cinfo->global_state != CSTATE_SCANNING &&
-       cinfo->global_state != CSTATE_RAW_OK &&
-       cinfo->global_state != CSTATE_WRCOEFS))
-    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
-
-  (*cinfo->marker->write_marker_header) (cinfo, marker, datalen);
-}
-
-GLOBAL(void)
-jpeg_write_m_byte (j_compress_ptr cinfo, int val)
-{
-  (*cinfo->marker->write_marker_byte) (cinfo, val);
-}
-
-
-/*
- * Alternate compression function: just write an abbreviated table file.
- * Before calling this, all parameters and a data destination must be set up.
- *
- * To produce a pair of files containing abbreviated tables and abbreviated
- * image data, one would proceed as follows:
- *
- *		initialize JPEG object
- *		set JPEG parameters
- *		set destination to table file
- *		jpeg_write_tables(cinfo);
- *		set destination to image file
- *		jpeg_start_compress(cinfo, FALSE);
- *		write data...
- *		jpeg_finish_compress(cinfo);
- *
- * jpeg_write_tables has the side effect of marking all tables written
- * (same as jpeg_suppress_tables(..., TRUE)).  Thus a subsequent start_compress
- * will not re-emit the tables unless it is passed write_all_tables=TRUE.
- */
-
-GLOBAL(void)
-jpeg_write_tables (j_compress_ptr cinfo)
-{
-  if (cinfo->global_state != CSTATE_START)
-    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
-
-  /* (Re)initialize error mgr and destination modules */
-  (*cinfo->err->reset_error_mgr) ((j_common_ptr) cinfo);
-  (*cinfo->dest->init_destination) (cinfo);
-  /* Initialize the marker writer ... bit of a crock to do it here. */
-  jinit_marker_writer(cinfo);
-  /* Write them tables! */
-  (*cinfo->marker->write_tables_only) (cinfo);
-  /* And clean up. */
-  (*cinfo->dest->term_destination) (cinfo);
-  /*
-   * In library releases up through v6a, we called jpeg_abort() here to free
-   * any working memory allocated by the destination manager and marker
-   * writer.  Some applications had a problem with that: they allocated space
-   * of their own from the library memory manager, and didn't want it to go
-   * away during write_tables.  So now we do nothing.  This will cause a
-   * memory leak if an app calls write_tables repeatedly without doing a full
-   * compression cycle or otherwise resetting the JPEG object.  However, that
-   * seems less bad than unexpectedly freeing memory in the normal case.
-   * An app that prefers the old behavior can call jpeg_abort for itself after
-   * each call to jpeg_write_tables().
-   */
-}

Engine/lib/ljpeg/jcapistd.c

@@ -1,161 +0,0 @@
-/*
- * jcapistd.c
- *
- * Copyright (C) 1994-1996, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains application interface code for the compression half
- * of the JPEG library.  These are the "standard" API routines that are
- * used in the normal full-compression case.  They are not used by a
- * transcoding-only application.  Note that if an application links in
- * jpeg_start_compress, it will end up linking in the entire compressor.
- * We thus must separate this file from jcapimin.c to avoid linking the
- * whole compression library into a transcoder.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-
-
-/*
- * Compression initialization.
- * Before calling this, all parameters and a data destination must be set up.
- *
- * We require a write_all_tables parameter as a failsafe check when writing
- * multiple datastreams from the same compression object.  Since prior runs
- * will have left all the tables marked sent_table=TRUE, a subsequent run
- * would emit an abbreviated stream (no tables) by default.  This may be what
- * is wanted, but for safety's sake it should not be the default behavior:
- * programmers should have to make a deliberate choice to emit abbreviated
- * images.  Therefore the documentation and examples should encourage people
- * to pass write_all_tables=TRUE; then it will take active thought to do the
- * wrong thing.
- */
-
-GLOBAL(void)
-jpeg_start_compress (j_compress_ptr cinfo, boolean write_all_tables)
-{
-  if (cinfo->global_state != CSTATE_START)
-    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
-
-  if (write_all_tables)
-    jpeg_suppress_tables(cinfo, FALSE);	/* mark all tables to be written */
-
-  /* (Re)initialize error mgr and destination modules */
-  (*cinfo->err->reset_error_mgr) ((j_common_ptr) cinfo);
-  (*cinfo->dest->init_destination) (cinfo);
-  /* Perform master selection of active modules */
-  jinit_compress_master(cinfo);
-  /* Set up for the first pass */
-  (*cinfo->master->prepare_for_pass) (cinfo);
-  /* Ready for application to drive first pass through jpeg_write_scanlines
-   * or jpeg_write_raw_data.
-   */
-  cinfo->next_scanline = 0;
-  cinfo->global_state = (cinfo->raw_data_in ? CSTATE_RAW_OK : CSTATE_SCANNING);
-}
-
-
-/*
- * Write some scanlines of data to the JPEG compressor.
- *
- * The return value will be the number of lines actually written.
- * This should be less than the supplied num_lines only in case that
- * the data destination module has requested suspension of the compressor,
- * or if more than image_height scanlines are passed in.
- *
- * Note: we warn about excess calls to jpeg_write_scanlines() since
- * this likely signals an application programmer error.  However,
- * excess scanlines passed in the last valid call are *silently* ignored,
- * so that the application need not adjust num_lines for end-of-image
- * when using a multiple-scanline buffer.
- */
-
-GLOBAL(JDIMENSION)
-jpeg_write_scanlines (j_compress_ptr cinfo, JSAMPARRAY scanlines,
-		      JDIMENSION num_lines)
-{
-  JDIMENSION row_ctr, rows_left;
-
-  if (cinfo->global_state != CSTATE_SCANNING)
-    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
-  if (cinfo->next_scanline >= cinfo->image_height)
-    WARNMS(cinfo, JWRN_TOO_MUCH_DATA);
-
-  /* Call progress monitor hook if present */
-  if (cinfo->progress != NULL) {
-    cinfo->progress->pass_counter = (long) cinfo->next_scanline;
-    cinfo->progress->pass_limit = (long) cinfo->image_height;
-    (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo);
-  }
-
-  /* Give master control module another chance if this is first call to
-   * jpeg_write_scanlines.  This lets output of the frame/scan headers be
-   * delayed so that application can write COM, etc, markers between
-   * jpeg_start_compress and jpeg_write_scanlines.
-   */
-  if (cinfo->master->call_pass_startup)
-    (*cinfo->master->pass_startup) (cinfo);
-
-  /* Ignore any extra scanlines at bottom of image. */
-  rows_left = cinfo->image_height - cinfo->next_scanline;
-  if (num_lines > rows_left)
-    num_lines = rows_left;
-
-  row_ctr = 0;
-  (*cinfo->main->process_data) (cinfo, scanlines, &row_ctr, num_lines);
-  cinfo->next_scanline += row_ctr;
-  return row_ctr;
-}
-
-
-/*
- * Alternate entry point to write raw data.
- * Processes exactly one iMCU row per call, unless suspended.
- */
-
-GLOBAL(JDIMENSION)
-jpeg_write_raw_data (j_compress_ptr cinfo, JSAMPIMAGE data,
-		     JDIMENSION num_lines)
-{
-  JDIMENSION lines_per_iMCU_row;
-
-  if (cinfo->global_state != CSTATE_RAW_OK)
-    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
-  if (cinfo->next_scanline >= cinfo->image_height) {
-    WARNMS(cinfo, JWRN_TOO_MUCH_DATA);
-    return 0;
-  }
-
-  /* Call progress monitor hook if present */
-  if (cinfo->progress != NULL) {
-    cinfo->progress->pass_counter = (long) cinfo->next_scanline;
-    cinfo->progress->pass_limit = (long) cinfo->image_height;
-    (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo);
-  }
-
-  /* Give master control module another chance if this is first call to
-   * jpeg_write_raw_data.  This lets output of the frame/scan headers be
-   * delayed so that application can write COM, etc, markers between
-   * jpeg_start_compress and jpeg_write_raw_data.
-   */
-  if (cinfo->master->call_pass_startup)
-    (*cinfo->master->pass_startup) (cinfo);
-
-  /* Verify that at least one iMCU row has been passed. */
-  lines_per_iMCU_row = cinfo->max_v_samp_factor * DCTSIZE;
-  if (num_lines < lines_per_iMCU_row)
-    ERREXIT(cinfo, JERR_BUFFER_SIZE);
-
-  /* Directly compress the row. */
-  if (! (*cinfo->coef->compress_data) (cinfo, data)) {
-    /* If compressor did not consume the whole row, suspend processing. */
-    return 0;
-  }
-
-  /* OK, we processed one iMCU row. */
-  cinfo->next_scanline += lines_per_iMCU_row;
-  return lines_per_iMCU_row;
-}

Engine/lib/ljpeg/jccoefct.c

@@ -1,449 +0,0 @@
-/*
- * jccoefct.c
- *
- * Copyright (C) 1994-1997, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains the coefficient buffer controller for compression.
- * This controller is the top level of the JPEG compressor proper.
- * The coefficient buffer lies between forward-DCT and entropy encoding steps.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-
-
-/* We use a full-image coefficient buffer when doing Huffman optimization,
- * and also for writing multiple-scan JPEG files.  In all cases, the DCT
- * step is run during the first pass, and subsequent passes need only read
- * the buffered coefficients.
- */
-#ifdef ENTROPY_OPT_SUPPORTED
-#define FULL_COEF_BUFFER_SUPPORTED
-#else
-#ifdef C_MULTISCAN_FILES_SUPPORTED
-#define FULL_COEF_BUFFER_SUPPORTED
-#endif
-#endif
-
-
-/* Private buffer controller object */
-
-typedef struct {
-  struct jpeg_c_coef_controller pub; /* public fields */
-
-  JDIMENSION iMCU_row_num;	/* iMCU row # within image */
-  JDIMENSION mcu_ctr;		/* counts MCUs processed in current row */
-  int MCU_vert_offset;		/* counts MCU rows within iMCU row */
-  int MCU_rows_per_iMCU_row;	/* number of such rows needed */
-
-  /* For single-pass compression, it's sufficient to buffer just one MCU
-   * (although this may prove a bit slow in practice).  We allocate a
-   * workspace of C_MAX_BLOCKS_IN_MCU coefficient blocks, and reuse it for each
-   * MCU constructed and sent.  (On 80x86, the workspace is FAR even though
-   * it's not really very big; this is to keep the module interfaces unchanged
-   * when a large coefficient buffer is necessary.)
-   * In multi-pass modes, this array points to the current MCU's blocks
-   * within the virtual arrays.
-   */
-  JBLOCKROW MCU_buffer[C_MAX_BLOCKS_IN_MCU];
-
-  /* In multi-pass modes, we need a virtual block array for each component. */
-  jvirt_barray_ptr whole_image[MAX_COMPONENTS];
-} my_coef_controller;
-
-typedef my_coef_controller * my_coef_ptr;
-
-
-/* Forward declarations */
-METHODDEF(boolean) compress_data
-    JPP((j_compress_ptr cinfo, JSAMPIMAGE input_buf));
-#ifdef FULL_COEF_BUFFER_SUPPORTED
-METHODDEF(boolean) compress_first_pass
-    JPP((j_compress_ptr cinfo, JSAMPIMAGE input_buf));
-METHODDEF(boolean) compress_output
-    JPP((j_compress_ptr cinfo, JSAMPIMAGE input_buf));
-#endif
-
-
-LOCAL(void)
-start_iMCU_row (j_compress_ptr cinfo)
-/* Reset within-iMCU-row counters for a new row */
-{
-  my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
-
-  /* In an interleaved scan, an MCU row is the same as an iMCU row.
-   * In a noninterleaved scan, an iMCU row has v_samp_factor MCU rows.
-   * But at the bottom of the image, process only what's left.
-   */
-  if (cinfo->comps_in_scan > 1) {
-    coef->MCU_rows_per_iMCU_row = 1;
-  } else {
-    if (coef->iMCU_row_num < (cinfo->total_iMCU_rows-1))
-      coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->v_samp_factor;
-    else
-      coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->last_row_height;
-  }
-
-  coef->mcu_ctr = 0;
-  coef->MCU_vert_offset = 0;
-}
-
-
-/*
- * Initialize for a processing pass.
- */
-
-METHODDEF(void)
-start_pass_coef (j_compress_ptr cinfo, J_BUF_MODE pass_mode)
-{
-  my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
-
-  coef->iMCU_row_num = 0;
-  start_iMCU_row(cinfo);
-
-  switch (pass_mode) {
-  case JBUF_PASS_THRU:
-    if (coef->whole_image[0] != NULL)
-      ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
-    coef->pub.compress_data = compress_data;
-    break;
-#ifdef FULL_COEF_BUFFER_SUPPORTED
-  case JBUF_SAVE_AND_PASS:
-    if (coef->whole_image[0] == NULL)
-      ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
-    coef->pub.compress_data = compress_first_pass;
-    break;
-  case JBUF_CRANK_DEST:
-    if (coef->whole_image[0] == NULL)
-      ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
-    coef->pub.compress_data = compress_output;
-    break;
-#endif
-  default:
-    ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
-    break;
-  }
-}
-
-
-/*
- * Process some data in the single-pass case.
- * We process the equivalent of one fully interleaved MCU row ("iMCU" row)
- * per call, ie, v_samp_factor block rows for each component in the image.
- * Returns TRUE if the iMCU row is completed, FALSE if suspended.
- *
- * NB: input_buf contains a plane for each component in image,
- * which we index according to the component's SOF position.
- */
-
-METHODDEF(boolean)
-compress_data (j_compress_ptr cinfo, JSAMPIMAGE input_buf)
-{
-  my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
-  JDIMENSION MCU_col_num;	/* index of current MCU within row */
-  JDIMENSION last_MCU_col = cinfo->MCUs_per_row - 1;
-  JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1;
-  int blkn, bi, ci, yindex, yoffset, blockcnt;
-  JDIMENSION ypos, xpos;
-  jpeg_component_info *compptr;
-
-  /* Loop to write as much as one whole iMCU row */
-  for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row;
-       yoffset++) {
-    for (MCU_col_num = coef->mcu_ctr; MCU_col_num <= last_MCU_col;
-	 MCU_col_num++) {
-      /* Determine where data comes from in input_buf and do the DCT thing.
-       * Each call on forward_DCT processes a horizontal row of DCT blocks
-       * as wide as an MCU; we rely on having allocated the MCU_buffer[] blocks
-       * sequentially.  Dummy blocks at the right or bottom edge are filled in
-       * specially.  The data in them does not matter for image reconstruction,
-       * so we fill them with values that will encode to the smallest amount of
-       * data, viz: all zeroes in the AC entries, DC entries equal to previous
-       * block's DC value.  (Thanks to Thomas Kinsman for this idea.)
-       */
-      blkn = 0;
-      for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
-	compptr = cinfo->cur_comp_info[ci];
-	blockcnt = (MCU_col_num < last_MCU_col) ? compptr->MCU_width
-						: compptr->last_col_width;
-	xpos = MCU_col_num * compptr->MCU_sample_width;
-	ypos = yoffset * DCTSIZE; /* ypos == (yoffset+yindex) * DCTSIZE */
-	for (yindex = 0; yindex < compptr->MCU_height; yindex++) {
-	  if (coef->iMCU_row_num < last_iMCU_row ||
-	      yoffset+yindex < compptr->last_row_height) {
-	    (*cinfo->fdct->forward_DCT) (cinfo, compptr,
-					 input_buf[compptr->component_index],
-					 coef->MCU_buffer[blkn],
-					 ypos, xpos, (JDIMENSION) blockcnt);
-	    if (blockcnt < compptr->MCU_width) {
-	      /* Create some dummy blocks at the right edge of the image. */
-	      jzero_far((void FAR *) coef->MCU_buffer[blkn + blockcnt],
-			(compptr->MCU_width - blockcnt) * SIZEOF(JBLOCK));
-	      for (bi = blockcnt; bi < compptr->MCU_width; bi++) {
-		coef->MCU_buffer[blkn+bi][0][0] = coef->MCU_buffer[blkn+bi-1][0][0];
-	      }
-	    }
-	  } else {
-	    /* Create a row of dummy blocks at the bottom of the image. */
-	    jzero_far((void FAR *) coef->MCU_buffer[blkn],
-		      compptr->MCU_width * SIZEOF(JBLOCK));
-	    for (bi = 0; bi < compptr->MCU_width; bi++) {
-	      coef->MCU_buffer[blkn+bi][0][0] = coef->MCU_buffer[blkn-1][0][0];
-	    }
-	  }
-	  blkn += compptr->MCU_width;
-	  ypos += DCTSIZE;
-	}
-      }
-      /* Try to write the MCU.  In event of a suspension failure, we will
-       * re-DCT the MCU on restart (a bit inefficient, could be fixed...)
-       */
-      if (! (*cinfo->entropy->encode_mcu) (cinfo, coef->MCU_buffer)) {
-	/* Suspension forced; update state counters and exit */
-	coef->MCU_vert_offset = yoffset;
-	coef->mcu_ctr = MCU_col_num;
-	return FALSE;
-      }
-    }
-    /* Completed an MCU row, but perhaps not an iMCU row */
-    coef->mcu_ctr = 0;
-  }
-  /* Completed the iMCU row, advance counters for next one */
-  coef->iMCU_row_num++;
-  start_iMCU_row(cinfo);
-  return TRUE;
-}
-
-
-#ifdef FULL_COEF_BUFFER_SUPPORTED
-
-/*
- * Process some data in the first pass of a multi-pass case.
- * We process the equivalent of one fully interleaved MCU row ("iMCU" row)
- * per call, ie, v_samp_factor block rows for each component in the image.
- * This amount of data is read from the source buffer, DCT'd and quantized,
- * and saved into the virtual arrays.  We also generate suitable dummy blocks
- * as needed at the right and lower edges.  (The dummy blocks are constructed
- * in the virtual arrays, which have been padded appropriately.)  This makes
- * it possible for subsequent passes not to worry about real vs. dummy blocks.
- *
- * We must also emit the data to the entropy encoder.  This is conveniently
- * done by calling compress_output() after we've loaded the current strip
- * of the virtual arrays.
- *
- * NB: input_buf contains a plane for each component in image.  All
- * components are DCT'd and loaded into the virtual arrays in this pass.
- * However, it may be that only a subset of the components are emitted to
- * the entropy encoder during this first pass; be careful about looking
- * at the scan-dependent variables (MCU dimensions, etc).
- */
-
-METHODDEF(boolean)
-compress_first_pass (j_compress_ptr cinfo, JSAMPIMAGE input_buf)
-{
-  my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
-  JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1;
-  JDIMENSION blocks_across, MCUs_across, MCUindex;
-  int bi, ci, h_samp_factor, block_row, block_rows, ndummy;
-  JCOEF lastDC;
-  jpeg_component_info *compptr;
-  JBLOCKARRAY buffer;
-  JBLOCKROW thisblockrow, lastblockrow;
-
-  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
-       ci++, compptr++) {
-    /* Align the virtual buffer for this component. */
-    buffer = (*cinfo->mem->access_virt_barray)
-      ((j_common_ptr) cinfo, coef->whole_image[ci],
-       coef->iMCU_row_num * compptr->v_samp_factor,
-       (JDIMENSION) compptr->v_samp_factor, TRUE);
-    /* Count non-dummy DCT block rows in this iMCU row. */
-    if (coef->iMCU_row_num < last_iMCU_row)
-      block_rows = compptr->v_samp_factor;
-    else {
-      /* NB: can't use last_row_height here, since may not be set! */
-      block_rows = (int) (compptr->height_in_blocks % compptr->v_samp_factor);
-      if (block_rows == 0) block_rows = compptr->v_samp_factor;
-    }
-    blocks_across = compptr->width_in_blocks;
-    h_samp_factor = compptr->h_samp_factor;
-    /* Count number of dummy blocks to be added at the right margin. */
-    ndummy = (int) (blocks_across % h_samp_factor);
-    if (ndummy > 0)
-      ndummy = h_samp_factor - ndummy;
-    /* Perform DCT for all non-dummy blocks in this iMCU row.  Each call
-     * on forward_DCT processes a complete horizontal row of DCT blocks.
-     */
-    for (block_row = 0; block_row < block_rows; block_row++) {
-      thisblockrow = buffer[block_row];
-      (*cinfo->fdct->forward_DCT) (cinfo, compptr,
-				   input_buf[ci], thisblockrow,
-				   (JDIMENSION) (block_row * DCTSIZE),
-				   (JDIMENSION) 0, blocks_across);
-      if (ndummy > 0) {
-	/* Create dummy blocks at the right edge of the image. */
-	thisblockrow += blocks_across; /* => first dummy block */
-	jzero_far((void FAR *) thisblockrow, ndummy * SIZEOF(JBLOCK));
-	lastDC = thisblockrow[-1][0];
-	for (bi = 0; bi < ndummy; bi++) {
-	  thisblockrow[bi][0] = lastDC;
-	}
-      }
-    }
-    /* If at end of image, create dummy block rows as needed.
-     * The tricky part here is that within each MCU, we want the DC values
-     * of the dummy blocks to match the last real block's DC value.
-     * This squeezes a few more bytes out of the resulting file...
-     */
-    if (coef->iMCU_row_num == last_iMCU_row) {
-      blocks_across += ndummy;	/* include lower right corner */
-      MCUs_across = blocks_across / h_samp_factor;
-      for (block_row = block_rows; block_row < compptr->v_samp_factor;
-	   block_row++) {
-	thisblockrow = buffer[block_row];
-	lastblockrow = buffer[block_row-1];
-	jzero_far((void FAR *) thisblockrow,
-		  (size_t) (blocks_across * SIZEOF(JBLOCK)));
-	for (MCUindex = 0; MCUindex < MCUs_across; MCUindex++) {
-	  lastDC = lastblockrow[h_samp_factor-1][0];
-	  for (bi = 0; bi < h_samp_factor; bi++) {
-	    thisblockrow[bi][0] = lastDC;
-	  }
-	  thisblockrow += h_samp_factor; /* advance to next MCU in row */
-	  lastblockrow += h_samp_factor;
-	}
-      }
-    }
-  }
-  /* NB: compress_output will increment iMCU_row_num if successful.
-   * A suspension return will result in redoing all the work above next time.
-   */
-
-  /* Emit data to the entropy encoder, sharing code with subsequent passes */
-  return compress_output(cinfo, input_buf);
-}
-
-
-/*
- * Process some data in subsequent passes of a multi-pass case.
- * We process the equivalent of one fully interleaved MCU row ("iMCU" row)
- * per call, ie, v_samp_factor block rows for each component in the scan.
- * The data is obtained from the virtual arrays and fed to the entropy coder.
- * Returns TRUE if the iMCU row is completed, FALSE if suspended.
- *
- * NB: input_buf is ignored; it is likely to be a NULL pointer.
- */
-
-METHODDEF(boolean)
-compress_output (j_compress_ptr cinfo, JSAMPIMAGE input_buf)
-{
-  my_coef_ptr coef = (my_coef_ptr) cinfo->coef;
-  JDIMENSION MCU_col_num;	/* index of current MCU within row */
-  int blkn, ci, xindex, yindex, yoffset;
-  JDIMENSION start_col;
-  JBLOCKARRAY buffer[MAX_COMPS_IN_SCAN];
-  JBLOCKROW buffer_ptr;
-  jpeg_component_info *compptr;
-
-  /* Align the virtual buffers for the components used in this scan.
-   * NB: during first pass, this is safe only because the buffers will
-   * already be aligned properly, so jmemmgr.c won't need to do any I/O.
-   */
-  for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
-    compptr = cinfo->cur_comp_info[ci];
-    buffer[ci] = (*cinfo->mem->access_virt_barray)
-      ((j_common_ptr) cinfo, coef->whole_image[compptr->component_index],
-       coef->iMCU_row_num * compptr->v_samp_factor,
-       (JDIMENSION) compptr->v_samp_factor, FALSE);
-  }
-
-  /* Loop to process one whole iMCU row */
-  for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row;
-       yoffset++) {
-    for (MCU_col_num = coef->mcu_ctr; MCU_col_num < cinfo->MCUs_per_row;
-	 MCU_col_num++) {
-      /* Construct list of pointers to DCT blocks belonging to this MCU */
-      blkn = 0;			/* index of current DCT block within MCU */
-      for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
-	compptr = cinfo->cur_comp_info[ci];
-	start_col = MCU_col_num * compptr->MCU_width;
-	for (yindex = 0; yindex < compptr->MCU_height; yindex++) {
-	  buffer_ptr = buffer[ci][yindex+yoffset] + start_col;
-	  for (xindex = 0; xindex < compptr->MCU_width; xindex++) {
-	    coef->MCU_buffer[blkn++] = buffer_ptr++;
-	  }
-	}
-      }
-      /* Try to write the MCU. */
-      if (! (*cinfo->entropy->encode_mcu) (cinfo, coef->MCU_buffer)) {
-	/* Suspension forced; update state counters and exit */
-	coef->MCU_vert_offset = yoffset;
-	coef->mcu_ctr = MCU_col_num;
-	return FALSE;
-      }
-    }
-    /* Completed an MCU row, but perhaps not an iMCU row */
-    coef->mcu_ctr = 0;
-  }
-  /* Completed the iMCU row, advance counters for next one */
-  coef->iMCU_row_num++;
-  start_iMCU_row(cinfo);
-  return TRUE;
-}
-
-#endif /* FULL_COEF_BUFFER_SUPPORTED */
-
-
-/*
- * Initialize coefficient buffer controller.
- */
-
-GLOBAL(void)
-jinit_c_coef_controller (j_compress_ptr cinfo, boolean need_full_buffer)
-{
-  my_coef_ptr coef;
-
-  coef = (my_coef_ptr)
-    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				SIZEOF(my_coef_controller));
-  cinfo->coef = (struct jpeg_c_coef_controller *) coef;
-  coef->pub.start_pass = start_pass_coef;
-
-  /* Create the coefficient buffer. */
-  if (need_full_buffer) {
-#ifdef FULL_COEF_BUFFER_SUPPORTED
-    /* Allocate a full-image virtual array for each component, */
-    /* padded to a multiple of samp_factor DCT blocks in each direction. */
-    int ci;
-    jpeg_component_info *compptr;
-
-    for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
-	 ci++, compptr++) {
-      coef->whole_image[ci] = (*cinfo->mem->request_virt_barray)
-	((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE,
-	 (JDIMENSION) jround_up((long) compptr->width_in_blocks,
-				(long) compptr->h_samp_factor),
-	 (JDIMENSION) jround_up((long) compptr->height_in_blocks,
-				(long) compptr->v_samp_factor),
-	 (JDIMENSION) compptr->v_samp_factor);
-    }
-#else
-    ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
-#endif
-  } else {
-    /* We only need a single-MCU buffer. */
-    JBLOCKROW buffer;
-    int i;
-
-    buffer = (JBLOCKROW)
-      (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				  C_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK));
-    for (i = 0; i < C_MAX_BLOCKS_IN_MCU; i++) {
-      coef->MCU_buffer[i] = buffer + i;
-    }
-    coef->whole_image[0] = NULL; /* flag for no virtual arrays */
-  }
-}

Engine/lib/ljpeg/jccolor.c

@@ -1,459 +0,0 @@
-/*
- * jccolor.c
- *
- * Copyright (C) 1991-1996, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains input colorspace conversion routines.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-
-
-/* Private subobject */
-
-typedef struct {
-  struct jpeg_color_converter pub; /* public fields */
-
-  /* Private state for RGB->YCC conversion */
-  INT32 * rgb_ycc_tab;		/* => table for RGB to YCbCr conversion */
-} my_color_converter;
-
-typedef my_color_converter * my_cconvert_ptr;
-
-
-/**************** RGB -> YCbCr conversion: most common case **************/
-
-/*
- * YCbCr is defined per CCIR 601-1, except that Cb and Cr are
- * normalized to the range 0..MAXJSAMPLE rather than -0.5 .. 0.5.
- * The conversion equations to be implemented are therefore
- *	Y  =  0.29900 * R + 0.58700 * G + 0.11400 * B
- *	Cb = -0.16874 * R - 0.33126 * G + 0.50000 * B  + CENTERJSAMPLE
- *	Cr =  0.50000 * R - 0.41869 * G - 0.08131 * B  + CENTERJSAMPLE
- * (These numbers are derived from TIFF 6.0 section 21, dated 3-June-92.)
- * Note: older versions of the IJG code used a zero offset of MAXJSAMPLE/2,
- * rather than CENTERJSAMPLE, for Cb and Cr.  This gave equal positive and
- * negative swings for Cb/Cr, but meant that grayscale values (Cb=Cr=0)
- * were not represented exactly.  Now we sacrifice exact representation of
- * maximum red and maximum blue in order to get exact grayscales.
- *
- * To avoid floating-point arithmetic, we represent the fractional constants
- * as integers scaled up by 2^16 (about 4 digits precision); we have to divide
- * the products by 2^16, with appropriate rounding, to get the correct answer.
- *
- * For even more speed, we avoid doing any multiplications in the inner loop
- * by precalculating the constants times R,G,B for all possible values.
- * For 8-bit JSAMPLEs this is very reasonable (only 256 entries per table);
- * for 12-bit samples it is still acceptable.  It's not very reasonable for
- * 16-bit samples, but if you want lossless storage you shouldn't be changing
- * colorspace anyway.
- * The CENTERJSAMPLE offsets and the rounding fudge-factor of 0.5 are included
- * in the tables to save adding them separately in the inner loop.
- */
-
-#define SCALEBITS	16	/* speediest right-shift on some machines */
-#define CBCR_OFFSET	((INT32) CENTERJSAMPLE << SCALEBITS)
-#define ONE_HALF	((INT32) 1 << (SCALEBITS-1))
-#define FIX(x)		((INT32) ((x) * (1L<<SCALEBITS) + 0.5))
-
-/* We allocate one big table and divide it up into eight parts, instead of
- * doing eight alloc_small requests.  This lets us use a single table base
- * address, which can be held in a register in the inner loops on many
- * machines (more than can hold all eight addresses, anyway).
- */
-
-#define R_Y_OFF		0			/* offset to R => Y section */
-#define G_Y_OFF		(1*(MAXJSAMPLE+1))	/* offset to G => Y section */
-#define B_Y_OFF		(2*(MAXJSAMPLE+1))	/* etc. */
-#define R_CB_OFF	(3*(MAXJSAMPLE+1))
-#define G_CB_OFF	(4*(MAXJSAMPLE+1))
-#define B_CB_OFF	(5*(MAXJSAMPLE+1))
-#define R_CR_OFF	B_CB_OFF		/* B=>Cb, R=>Cr are the same */
-#define G_CR_OFF	(6*(MAXJSAMPLE+1))
-#define B_CR_OFF	(7*(MAXJSAMPLE+1))
-#define TABLE_SIZE	(8*(MAXJSAMPLE+1))
-
-
-/*
- * Initialize for RGB->YCC colorspace conversion.
- */
-
-METHODDEF(void)
-rgb_ycc_start (j_compress_ptr cinfo)
-{
-  my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
-  INT32 * rgb_ycc_tab;
-  INT32 i;
-
-  /* Allocate and fill in the conversion tables. */
-  cconvert->rgb_ycc_tab = rgb_ycc_tab = (INT32 *)
-    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				(TABLE_SIZE * SIZEOF(INT32)));
-
-  for (i = 0; i <= MAXJSAMPLE; i++) {
-    rgb_ycc_tab[i+R_Y_OFF] = FIX(0.29900) * i;
-    rgb_ycc_tab[i+G_Y_OFF] = FIX(0.58700) * i;
-    rgb_ycc_tab[i+B_Y_OFF] = FIX(0.11400) * i     + ONE_HALF;
-    rgb_ycc_tab[i+R_CB_OFF] = (-FIX(0.16874)) * i;
-    rgb_ycc_tab[i+G_CB_OFF] = (-FIX(0.33126)) * i;
-    /* We use a rounding fudge-factor of 0.5-epsilon for Cb and Cr.
-     * This ensures that the maximum output will round to MAXJSAMPLE
-     * not MAXJSAMPLE+1, and thus that we don't have to range-limit.
-     */
-    rgb_ycc_tab[i+B_CB_OFF] = FIX(0.50000) * i    + CBCR_OFFSET + ONE_HALF-1;
-/*  B=>Cb and R=>Cr tables are the same
-    rgb_ycc_tab[i+R_CR_OFF] = FIX(0.50000) * i    + CBCR_OFFSET + ONE_HALF-1;
-*/
-    rgb_ycc_tab[i+G_CR_OFF] = (-FIX(0.41869)) * i;
-    rgb_ycc_tab[i+B_CR_OFF] = (-FIX(0.08131)) * i;
-  }
-}
-
-
-/*
- * Convert some rows of samples to the JPEG colorspace.
- *
- * Note that we change from the application's interleaved-pixel format
- * to our internal noninterleaved, one-plane-per-component format.
- * The input buffer is therefore three times as wide as the output buffer.
- *
- * A starting row offset is provided only for the output buffer.  The caller
- * can easily adjust the passed input_buf value to accommodate any row
- * offset required on that side.
- */
-
-METHODDEF(void)
-rgb_ycc_convert (j_compress_ptr cinfo,
-		 JSAMPARRAY input_buf, JSAMPIMAGE output_buf,
-		 JDIMENSION output_row, int num_rows)
-{
-  my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
-  register int r, g, b;
-  register INT32 * ctab = cconvert->rgb_ycc_tab;
-  register JSAMPROW inptr;
-  register JSAMPROW outptr0, outptr1, outptr2;
-  register JDIMENSION col;
-  JDIMENSION num_cols = cinfo->image_width;
-
-  while (--num_rows >= 0) {
-    inptr = *input_buf++;
-    outptr0 = output_buf[0][output_row];
-    outptr1 = output_buf[1][output_row];
-    outptr2 = output_buf[2][output_row];
-    output_row++;
-    for (col = 0; col < num_cols; col++) {
-      r = GETJSAMPLE(inptr[RGB_RED]);
-      g = GETJSAMPLE(inptr[RGB_GREEN]);
-      b = GETJSAMPLE(inptr[RGB_BLUE]);
-      inptr += RGB_PIXELSIZE;
-      /* If the inputs are 0..MAXJSAMPLE, the outputs of these equations
-       * must be too; we do not need an explicit range-limiting operation.
-       * Hence the value being shifted is never negative, and we don't
-       * need the general RIGHT_SHIFT macro.
-       */
-      /* Y */
-      outptr0[col] = (JSAMPLE)
-		((ctab[r+R_Y_OFF] + ctab[g+G_Y_OFF] + ctab[b+B_Y_OFF])
-		 >> SCALEBITS);
-      /* Cb */
-      outptr1[col] = (JSAMPLE)
-		((ctab[r+R_CB_OFF] + ctab[g+G_CB_OFF] + ctab[b+B_CB_OFF])
-		 >> SCALEBITS);
-      /* Cr */
-      outptr2[col] = (JSAMPLE)
-		((ctab[r+R_CR_OFF] + ctab[g+G_CR_OFF] + ctab[b+B_CR_OFF])
-		 >> SCALEBITS);
-    }
-  }
-}
-
-
-/**************** Cases other than RGB -> YCbCr **************/
-
-
-/*
- * Convert some rows of samples to the JPEG colorspace.
- * This version handles RGB->grayscale conversion, which is the same
- * as the RGB->Y portion of RGB->YCbCr.
- * We assume rgb_ycc_start has been called (we only use the Y tables).
- */
-
-METHODDEF(void)
-rgb_gray_convert (j_compress_ptr cinfo,
-		  JSAMPARRAY input_buf, JSAMPIMAGE output_buf,
-		  JDIMENSION output_row, int num_rows)
-{
-  my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
-  register int r, g, b;
-  register INT32 * ctab = cconvert->rgb_ycc_tab;
-  register JSAMPROW inptr;
-  register JSAMPROW outptr;
-  register JDIMENSION col;
-  JDIMENSION num_cols = cinfo->image_width;
-
-  while (--num_rows >= 0) {
-    inptr = *input_buf++;
-    outptr = output_buf[0][output_row];
-    output_row++;
-    for (col = 0; col < num_cols; col++) {
-      r = GETJSAMPLE(inptr[RGB_RED]);
-      g = GETJSAMPLE(inptr[RGB_GREEN]);
-      b = GETJSAMPLE(inptr[RGB_BLUE]);
-      inptr += RGB_PIXELSIZE;
-      /* Y */
-      outptr[col] = (JSAMPLE)
-		((ctab[r+R_Y_OFF] + ctab[g+G_Y_OFF] + ctab[b+B_Y_OFF])
-		 >> SCALEBITS);
-    }
-  }
-}
-
-
-/*
- * Convert some rows of samples to the JPEG colorspace.
- * This version handles Adobe-style CMYK->YCCK conversion,
- * where we convert R=1-C, G=1-M, and B=1-Y to YCbCr using the same
- * conversion as above, while passing K (black) unchanged.
- * We assume rgb_ycc_start has been called.
- */
-
-METHODDEF(void)
-cmyk_ycck_convert (j_compress_ptr cinfo,
-		   JSAMPARRAY input_buf, JSAMPIMAGE output_buf,
-		   JDIMENSION output_row, int num_rows)
-{
-  my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
-  register int r, g, b;
-  register INT32 * ctab = cconvert->rgb_ycc_tab;
-  register JSAMPROW inptr;
-  register JSAMPROW outptr0, outptr1, outptr2, outptr3;
-  register JDIMENSION col;
-  JDIMENSION num_cols = cinfo->image_width;
-
-  while (--num_rows >= 0) {
-    inptr = *input_buf++;
-    outptr0 = output_buf[0][output_row];
-    outptr1 = output_buf[1][output_row];
-    outptr2 = output_buf[2][output_row];
-    outptr3 = output_buf[3][output_row];
-    output_row++;
-    for (col = 0; col < num_cols; col++) {
-      r = MAXJSAMPLE - GETJSAMPLE(inptr[0]);
-      g = MAXJSAMPLE - GETJSAMPLE(inptr[1]);
-      b = MAXJSAMPLE - GETJSAMPLE(inptr[2]);
-      /* K passes through as-is */
-      outptr3[col] = inptr[3];	/* don't need GETJSAMPLE here */
-      inptr += 4;
-      /* If the inputs are 0..MAXJSAMPLE, the outputs of these equations
-       * must be too; we do not need an explicit range-limiting operation.
-       * Hence the value being shifted is never negative, and we don't
-       * need the general RIGHT_SHIFT macro.
-       */
-      /* Y */
-      outptr0[col] = (JSAMPLE)
-		((ctab[r+R_Y_OFF] + ctab[g+G_Y_OFF] + ctab[b+B_Y_OFF])
-		 >> SCALEBITS);
-      /* Cb */
-      outptr1[col] = (JSAMPLE)
-		((ctab[r+R_CB_OFF] + ctab[g+G_CB_OFF] + ctab[b+B_CB_OFF])
-		 >> SCALEBITS);
-      /* Cr */
-      outptr2[col] = (JSAMPLE)
-		((ctab[r+R_CR_OFF] + ctab[g+G_CR_OFF] + ctab[b+B_CR_OFF])
-		 >> SCALEBITS);
-    }
-  }
-}
-
-
-/*
- * Convert some rows of samples to the JPEG colorspace.
- * This version handles grayscale output with no conversion.
- * The source can be either plain grayscale or YCbCr (since Y == gray).
- */
-
-METHODDEF(void)
-grayscale_convert (j_compress_ptr cinfo,
-		   JSAMPARRAY input_buf, JSAMPIMAGE output_buf,
-		   JDIMENSION output_row, int num_rows)
-{
-  register JSAMPROW inptr;
-  register JSAMPROW outptr;
-  register JDIMENSION col;
-  JDIMENSION num_cols = cinfo->image_width;
-  int instride = cinfo->input_components;
-
-  while (--num_rows >= 0) {
-    inptr = *input_buf++;
-    outptr = output_buf[0][output_row];
-    output_row++;
-    for (col = 0; col < num_cols; col++) {
-      outptr[col] = inptr[0];	/* don't need GETJSAMPLE() here */
-      inptr += instride;
-    }
-  }
-}
-
-
-/*
- * Convert some rows of samples to the JPEG colorspace.
- * This version handles multi-component colorspaces without conversion.
- * We assume input_components == num_components.
- */
-
-METHODDEF(void)
-null_convert (j_compress_ptr cinfo,
-	      JSAMPARRAY input_buf, JSAMPIMAGE output_buf,
-	      JDIMENSION output_row, int num_rows)
-{
-  register JSAMPROW inptr;
-  register JSAMPROW outptr;
-  register JDIMENSION col;
-  register int ci;
-  int nc = cinfo->num_components;
-  JDIMENSION num_cols = cinfo->image_width;
-
-  while (--num_rows >= 0) {
-    /* It seems fastest to make a separate pass for each component. */
-    for (ci = 0; ci < nc; ci++) {
-      inptr = *input_buf;
-      outptr = output_buf[ci][output_row];
-      for (col = 0; col < num_cols; col++) {
-	outptr[col] = inptr[ci]; /* don't need GETJSAMPLE() here */
-	inptr += nc;
-      }
-    }
-    input_buf++;
-    output_row++;
-  }
-}
-
-
-/*
- * Empty method for start_pass.
- */
-
-METHODDEF(void)
-null_method (j_compress_ptr cinfo)
-{
-  /* no work needed */
-}
-
-
-/*
- * Module initialization routine for input colorspace conversion.
- */
-
-GLOBAL(void)
-jinit_color_converter (j_compress_ptr cinfo)
-{
-  my_cconvert_ptr cconvert;
-
-  cconvert = (my_cconvert_ptr)
-    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				SIZEOF(my_color_converter));
-  cinfo->cconvert = (struct jpeg_color_converter *) cconvert;
-  /* set start_pass to null method until we find out differently */
-  cconvert->pub.start_pass = null_method;
-
-  /* Make sure input_components agrees with in_color_space */
-  switch (cinfo->in_color_space) {
-  case JCS_GRAYSCALE:
-    if (cinfo->input_components != 1)
-      ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE);
-    break;
-
-  case JCS_RGB:
-#if RGB_PIXELSIZE != 3
-    if (cinfo->input_components != RGB_PIXELSIZE)
-      ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE);
-    break;
-#endif /* else share code with YCbCr */
-
-  case JCS_YCbCr:
-    if (cinfo->input_components != 3)
-      ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE);
-    break;
-
-  case JCS_CMYK:
-  case JCS_YCCK:
-    if (cinfo->input_components != 4)
-      ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE);
-    break;
-
-  default:			/* JCS_UNKNOWN can be anything */
-    if (cinfo->input_components < 1)
-      ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE);
-    break;
-  }
-
-  /* Check num_components, set conversion method based on requested space */
-  switch (cinfo->jpeg_color_space) {
-  case JCS_GRAYSCALE:
-    if (cinfo->num_components != 1)
-      ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
-    if (cinfo->in_color_space == JCS_GRAYSCALE)
-      cconvert->pub.color_convert = grayscale_convert;
-    else if (cinfo->in_color_space == JCS_RGB) {
-      cconvert->pub.start_pass = rgb_ycc_start;
-      cconvert->pub.color_convert = rgb_gray_convert;
-    } else if (cinfo->in_color_space == JCS_YCbCr)
-      cconvert->pub.color_convert = grayscale_convert;
-    else
-      ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
-    break;
-
-  case JCS_RGB:
-    if (cinfo->num_components != 3)
-      ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
-    if (cinfo->in_color_space == JCS_RGB && RGB_PIXELSIZE == 3)
-      cconvert->pub.color_convert = null_convert;
-    else
-      ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
-    break;
-
-  case JCS_YCbCr:
-    if (cinfo->num_components != 3)
-      ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
-    if (cinfo->in_color_space == JCS_RGB) {
-      cconvert->pub.start_pass = rgb_ycc_start;
-      cconvert->pub.color_convert = rgb_ycc_convert;
-    } else if (cinfo->in_color_space == JCS_YCbCr)
-      cconvert->pub.color_convert = null_convert;
-    else
-      ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
-    break;
-
-  case JCS_CMYK:
-    if (cinfo->num_components != 4)
-      ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
-    if (cinfo->in_color_space == JCS_CMYK)
-      cconvert->pub.color_convert = null_convert;
-    else
-      ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
-    break;
-
-  case JCS_YCCK:
-    if (cinfo->num_components != 4)
-      ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
-    if (cinfo->in_color_space == JCS_CMYK) {
-      cconvert->pub.start_pass = rgb_ycc_start;
-      cconvert->pub.color_convert = cmyk_ycck_convert;
-    } else if (cinfo->in_color_space == JCS_YCCK)
-      cconvert->pub.color_convert = null_convert;
-    else
-      ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
-    break;
-
-  default:			/* allow null conversion of JCS_UNKNOWN */
-    if (cinfo->jpeg_color_space != cinfo->in_color_space ||
-	cinfo->num_components != cinfo->input_components)
-      ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
-    cconvert->pub.color_convert = null_convert;
-    break;
-  }
-}

Engine/lib/ljpeg/jcdctmgr.c

@@ -1,387 +0,0 @@
-/*
- * jcdctmgr.c
- *
- * Copyright (C) 1994-1996, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains the forward-DCT management logic.
- * This code selects a particular DCT implementation to be used,
- * and it performs related housekeeping chores including coefficient
- * quantization.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-#include "jdct.h"		/* Private declarations for DCT subsystem */
-
-
-/* Private subobject for this module */
-
-typedef struct {
-  struct jpeg_forward_dct pub;	/* public fields */
-
-  /* Pointer to the DCT routine actually in use */
-  forward_DCT_method_ptr do_dct;
-
-  /* The actual post-DCT divisors --- not identical to the quant table
-   * entries, because of scaling (especially for an unnormalized DCT).
-   * Each table is given in normal array order.
-   */
-  DCTELEM * divisors[NUM_QUANT_TBLS];
-
-#ifdef DCT_FLOAT_SUPPORTED
-  /* Same as above for the floating-point case. */
-  float_DCT_method_ptr do_float_dct;
-  FAST_FLOAT * float_divisors[NUM_QUANT_TBLS];
-#endif
-} my_fdct_controller;
-
-typedef my_fdct_controller * my_fdct_ptr;
-
-
-/*
- * Initialize for a processing pass.
- * Verify that all referenced Q-tables are present, and set up
- * the divisor table for each one.
- * In the current implementation, DCT of all components is done during
- * the first pass, even if only some components will be output in the
- * first scan.  Hence all components should be examined here.
- */
-
-METHODDEF(void)
-start_pass_fdctmgr (j_compress_ptr cinfo)
-{
-  my_fdct_ptr fdct = (my_fdct_ptr) cinfo->fdct;
-  int ci, qtblno, i;
-  jpeg_component_info *compptr;
-  JQUANT_TBL * qtbl;
-  DCTELEM * dtbl;
-
-  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
-       ci++, compptr++) {
-    qtblno = compptr->quant_tbl_no;
-    /* Make sure specified quantization table is present */
-    if (qtblno < 0 || qtblno >= NUM_QUANT_TBLS ||
-	cinfo->quant_tbl_ptrs[qtblno] == NULL)
-      ERREXIT1(cinfo, JERR_NO_QUANT_TABLE, qtblno);
-    qtbl = cinfo->quant_tbl_ptrs[qtblno];
-    /* Compute divisors for this quant table */
-    /* We may do this more than once for same table, but it's not a big deal */
-    switch (cinfo->dct_method) {
-#ifdef DCT_ISLOW_SUPPORTED
-    case JDCT_ISLOW:
-      /* For LL&M IDCT method, divisors are equal to raw quantization
-       * coefficients multiplied by 8 (to counteract scaling).
-       */
-      if (fdct->divisors[qtblno] == NULL) {
-	fdct->divisors[qtblno] = (DCTELEM *)
-	  (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				      DCTSIZE2 * SIZEOF(DCTELEM));
-      }
-      dtbl = fdct->divisors[qtblno];
-      for (i = 0; i < DCTSIZE2; i++) {
-	dtbl[i] = ((DCTELEM) qtbl->quantval[i]) << 3;
-      }
-      break;
-#endif
-#ifdef DCT_IFAST_SUPPORTED
-    case JDCT_IFAST:
-      {
-	/* For AA&N IDCT method, divisors are equal to quantization
-	 * coefficients scaled by scalefactor[row]*scalefactor[col], where
-	 *   scalefactor[0] = 1
-	 *   scalefactor[k] = cos(k*PI/16) * sqrt(2)    for k=1..7
-	 * We apply a further scale factor of 8.
-	 */
-#define CONST_BITS 14
-	static const INT16 aanscales[DCTSIZE2] = {
-	  /* precomputed values scaled up by 14 bits */
-	  16384, 22725, 21407, 19266, 16384, 12873,  8867,  4520,
-	  22725, 31521, 29692, 26722, 22725, 17855, 12299,  6270,
-	  21407, 29692, 27969, 25172, 21407, 16819, 11585,  5906,
-	  19266, 26722, 25172, 22654, 19266, 15137, 10426,  5315,
-	  16384, 22725, 21407, 19266, 16384, 12873,  8867,  4520,
-	  12873, 17855, 16819, 15137, 12873, 10114,  6967,  3552,
-	   8867, 12299, 11585, 10426,  8867,  6967,  4799,  2446,
-	   4520,  6270,  5906,  5315,  4520,  3552,  2446,  1247
-	};
-	SHIFT_TEMPS
-
-	if (fdct->divisors[qtblno] == NULL) {
-	  fdct->divisors[qtblno] = (DCTELEM *)
-	    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-					DCTSIZE2 * SIZEOF(DCTELEM));
-	}
-	dtbl = fdct->divisors[qtblno];
-	for (i = 0; i < DCTSIZE2; i++) {
-	  dtbl[i] = (DCTELEM)
-	    DESCALE(MULTIPLY16V16((INT32) qtbl->quantval[i],
-				  (INT32) aanscales[i]),
-		    CONST_BITS-3);
-	}
-      }
-      break;
-#endif
-#ifdef DCT_FLOAT_SUPPORTED
-    case JDCT_FLOAT:
-      {
-	/* For float AA&N IDCT method, divisors are equal to quantization
-	 * coefficients scaled by scalefactor[row]*scalefactor[col], where
-	 *   scalefactor[0] = 1
-	 *   scalefactor[k] = cos(k*PI/16) * sqrt(2)    for k=1..7
-	 * We apply a further scale factor of 8.
-	 * What's actually stored is 1/divisor so that the inner loop can
-	 * use a multiplication rather than a division.
-	 */
-	FAST_FLOAT * fdtbl;
-	int row, col;
-	static const double aanscalefactor[DCTSIZE] = {
-	  1.0, 1.387039845, 1.306562965, 1.175875602,
-	  1.0, 0.785694958, 0.541196100, 0.275899379
-	};
-
-	if (fdct->float_divisors[qtblno] == NULL) {
-	  fdct->float_divisors[qtblno] = (FAST_FLOAT *)
-	    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-					DCTSIZE2 * SIZEOF(FAST_FLOAT));
-	}
-	fdtbl = fdct->float_divisors[qtblno];
-	i = 0;
-	for (row = 0; row < DCTSIZE; row++) {
-	  for (col = 0; col < DCTSIZE; col++) {
-	    fdtbl[i] = (FAST_FLOAT)
-	      (1.0 / (((double) qtbl->quantval[i] *
-		       aanscalefactor[row] * aanscalefactor[col] * 8.0)));
-	    i++;
-	  }
-	}
-      }
-      break;
-#endif
-    default:
-      ERREXIT(cinfo, JERR_NOT_COMPILED);
-      break;
-    }
-  }
-}
-
-
-/*
- * Perform forward DCT on one or more blocks of a component.
- *
- * The input samples are taken from the sample_data[] array starting at
- * position start_row/start_col, and moving to the right for any additional
- * blocks. The quantized coefficients are returned in coef_blocks[].
- */
-
-METHODDEF(void)
-forward_DCT (j_compress_ptr cinfo, jpeg_component_info * compptr,
-	     JSAMPARRAY sample_data, JBLOCKROW coef_blocks,
-	     JDIMENSION start_row, JDIMENSION start_col,
-	     JDIMENSION num_blocks)
-/* This version is used for integer DCT implementations. */
-{
-  /* This routine is heavily used, so it's worth coding it tightly. */
-  my_fdct_ptr fdct = (my_fdct_ptr) cinfo->fdct;
-  forward_DCT_method_ptr do_dct = fdct->do_dct;
-  DCTELEM * divisors = fdct->divisors[compptr->quant_tbl_no];
-  DCTELEM workspace[DCTSIZE2];	/* work area for FDCT subroutine */
-  JDIMENSION bi;
-
-  sample_data += start_row;	/* fold in the vertical offset once */
-
-  for (bi = 0; bi < num_blocks; bi++, start_col += DCTSIZE) {
-    /* Load data into workspace, applying unsigned->signed conversion */
-    { register DCTELEM *workspaceptr;
-      register JSAMPROW elemptr;
-      register int elemr;
-
-      workspaceptr = workspace;
-      for (elemr = 0; elemr < DCTSIZE; elemr++) {
-	elemptr = sample_data[elemr] + start_col;
-#if DCTSIZE == 8		/* unroll the inner loop */
-	*workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
-	*workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
-	*workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
-	*workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
-	*workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
-	*workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
-	*workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
-	*workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
-#else
-	{ register int elemc;
-	  for (elemc = DCTSIZE; elemc > 0; elemc--) {
-	    *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
-	  }
-	}
-#endif
-      }
-    }
-
-    /* Perform the DCT */
-    (*do_dct) (workspace);
-
-    /* Quantize/descale the coefficients, and store into coef_blocks[] */
-    { register DCTELEM temp, qval;
-      register int i;
-      register JCOEFPTR output_ptr = coef_blocks[bi];
-
-      for (i = 0; i < DCTSIZE2; i++) {
-	qval = divisors[i];
-	temp = workspace[i];
-	/* Divide the coefficient value by qval, ensuring proper rounding.
-	 * Since C does not specify the direction of rounding for negative
-	 * quotients, we have to force the dividend positive for portability.
-	 *
-	 * In most files, at least half of the output values will be zero
-	 * (at default quantization settings, more like three-quarters...)
-	 * so we should ensure that this case is fast.  On many machines,
-	 * a comparison is enough cheaper than a divide to make a special test
-	 * a win.  Since both inputs will be nonnegative, we need only test
-	 * for a < b to discover whether a/b is 0.
-	 * If your machine's division is fast enough, define FAST_DIVIDE.
-	 */
-#ifdef FAST_DIVIDE
-#define DIVIDE_BY(a,b)	a /= b
-#else
-#define DIVIDE_BY(a,b)	if (a >= b) a /= b; else a = 0
-#endif
-	if (temp < 0) {
-	  temp = -temp;
-	  temp += qval>>1;	/* for rounding */
-	  DIVIDE_BY(temp, qval);
-	  temp = -temp;
-	} else {
-	  temp += qval>>1;	/* for rounding */
-	  DIVIDE_BY(temp, qval);
-	}
-	output_ptr[i] = (JCOEF) temp;
-      }
-    }
-  }
-}
-
-
-#ifdef DCT_FLOAT_SUPPORTED
-
-METHODDEF(void)
-forward_DCT_float (j_compress_ptr cinfo, jpeg_component_info * compptr,
-		   JSAMPARRAY sample_data, JBLOCKROW coef_blocks,
-		   JDIMENSION start_row, JDIMENSION start_col,
-		   JDIMENSION num_blocks)
-/* This version is used for floating-point DCT implementations. */
-{
-  /* This routine is heavily used, so it's worth coding it tightly. */
-  my_fdct_ptr fdct = (my_fdct_ptr) cinfo->fdct;
-  float_DCT_method_ptr do_dct = fdct->do_float_dct;
-  FAST_FLOAT * divisors = fdct->float_divisors[compptr->quant_tbl_no];
-  FAST_FLOAT workspace[DCTSIZE2]; /* work area for FDCT subroutine */
-  JDIMENSION bi;
-
-  sample_data += start_row;	/* fold in the vertical offset once */
-
-  for (bi = 0; bi < num_blocks; bi++, start_col += DCTSIZE) {
-    /* Load data into workspace, applying unsigned->signed conversion */
-    { register FAST_FLOAT *workspaceptr;
-      register JSAMPROW elemptr;
-      register int elemr;
-
-      workspaceptr = workspace;
-      for (elemr = 0; elemr < DCTSIZE; elemr++) {
-	elemptr = sample_data[elemr] + start_col;
-#if DCTSIZE == 8		/* unroll the inner loop */
-	*workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
-	*workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
-	*workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
-	*workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
-	*workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
-	*workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
-	*workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
-	*workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
-#else
-	{ register int elemc;
-	  for (elemc = DCTSIZE; elemc > 0; elemc--) {
-	    *workspaceptr++ = (FAST_FLOAT)
-	      (GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
-	  }
-	}
-#endif
-      }
-    }
-
-    /* Perform the DCT */
-    (*do_dct) (workspace);
-
-    /* Quantize/descale the coefficients, and store into coef_blocks[] */
-    { register FAST_FLOAT temp;
-      register int i;
-      register JCOEFPTR output_ptr = coef_blocks[bi];
-
-      for (i = 0; i < DCTSIZE2; i++) {
-	/* Apply the quantization and scaling factor */
-	temp = workspace[i] * divisors[i];
-	/* Round to nearest integer.
-	 * Since C does not specify the direction of rounding for negative
-	 * quotients, we have to force the dividend positive for portability.
-	 * The maximum coefficient size is +-16K (for 12-bit data), so this
-	 * code should work for either 16-bit or 32-bit ints.
-	 */
-	output_ptr[i] = (JCOEF) ((int) (temp + (FAST_FLOAT) 16384.5) - 16384);
-      }
-    }
-  }
-}
-
-#endif /* DCT_FLOAT_SUPPORTED */
-
-
-/*
- * Initialize FDCT manager.
- */
-
-GLOBAL(void)
-jinit_forward_dct (j_compress_ptr cinfo)
-{
-  my_fdct_ptr fdct;
-  int i;
-
-  fdct = (my_fdct_ptr)
-    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				SIZEOF(my_fdct_controller));
-  cinfo->fdct = (struct jpeg_forward_dct *) fdct;
-  fdct->pub.start_pass = start_pass_fdctmgr;
-
-  switch (cinfo->dct_method) {
-#ifdef DCT_ISLOW_SUPPORTED
-  case JDCT_ISLOW:
-    fdct->pub.forward_DCT = forward_DCT;
-    fdct->do_dct = jpeg_fdct_islow;
-    break;
-#endif
-#ifdef DCT_IFAST_SUPPORTED
-  case JDCT_IFAST:
-    fdct->pub.forward_DCT = forward_DCT;
-    fdct->do_dct = jpeg_fdct_ifast;
-    break;
-#endif
-#ifdef DCT_FLOAT_SUPPORTED
-  case JDCT_FLOAT:
-    fdct->pub.forward_DCT = forward_DCT_float;
-    fdct->do_float_dct = jpeg_fdct_float;
-    break;
-#endif
-  default:
-    ERREXIT(cinfo, JERR_NOT_COMPILED);
-    break;
-  }
-
-  /* Mark divisor tables unallocated */
-  for (i = 0; i < NUM_QUANT_TBLS; i++) {
-    fdct->divisors[i] = NULL;
-#ifdef DCT_FLOAT_SUPPORTED
-    fdct->float_divisors[i] = NULL;
-#endif
-  }
-}

Engine/lib/ljpeg/jchuff.c

@@ -1,909 +0,0 @@
-/*
- * jchuff.c
- *
- * Copyright (C) 1991-1997, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains Huffman entropy encoding routines.
- *
- * Much of the complexity here has to do with supporting output suspension.
- * If the data destination module demands suspension, we want to be able to
- * back up to the start of the current MCU.  To do this, we copy state
- * variables into local working storage, and update them back to the
- * permanent JPEG objects only upon successful completion of an MCU.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-#include "jchuff.h"		/* Declarations shared with jcphuff.c */
-
-
-/* Expanded entropy encoder object for Huffman encoding.
- *
- * The savable_state subrecord contains fields that change within an MCU,
- * but must not be updated permanently until we complete the MCU.
- */
-
-typedef struct {
-  INT32 put_buffer;		/* current bit-accumulation buffer */
-  int put_bits;			/* # of bits now in it */
-  int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */
-} savable_state;
-
-/* This macro is to work around compilers with missing or broken
- * structure assignment.  You'll need to fix this code if you have
- * such a compiler and you change MAX_COMPS_IN_SCAN.
- */
-
-#ifndef NO_STRUCT_ASSIGN
-#define ASSIGN_STATE(dest,src)  ((dest) = (src))
-#else
-#if MAX_COMPS_IN_SCAN == 4
-#define ASSIGN_STATE(dest,src)  \
-	((dest).put_buffer = (src).put_buffer, \
-	 (dest).put_bits = (src).put_bits, \
-	 (dest).last_dc_val[0] = (src).last_dc_val[0], \
-	 (dest).last_dc_val[1] = (src).last_dc_val[1], \
-	 (dest).last_dc_val[2] = (src).last_dc_val[2], \
-	 (dest).last_dc_val[3] = (src).last_dc_val[3])
-#endif
-#endif
-
-
-typedef struct {
-  struct jpeg_entropy_encoder pub; /* public fields */
-
-  savable_state saved;		/* Bit buffer & DC state at start of MCU */
-
-  /* These fields are NOT loaded into local working state. */
-  unsigned int restarts_to_go;	/* MCUs left in this restart interval */
-  int next_restart_num;		/* next restart number to write (0-7) */
-
-  /* Pointers to derived tables (these workspaces have image lifespan) */
-  c_derived_tbl * dc_derived_tbls[NUM_HUFF_TBLS];
-  c_derived_tbl * ac_derived_tbls[NUM_HUFF_TBLS];
-
-#ifdef ENTROPY_OPT_SUPPORTED	/* Statistics tables for optimization */
-  long * dc_count_ptrs[NUM_HUFF_TBLS];
-  long * ac_count_ptrs[NUM_HUFF_TBLS];
-#endif
-} huff_entropy_encoder;
-
-typedef huff_entropy_encoder * huff_entropy_ptr;
-
-/* Working state while writing an MCU.
- * This struct contains all the fields that are needed by subroutines.
- */
-
-typedef struct {
-  JOCTET * next_output_byte;	/* => next byte to write in buffer */
-  size_t free_in_buffer;	/* # of byte spaces remaining in buffer */
-  savable_state cur;		/* Current bit buffer & DC state */
-  j_compress_ptr cinfo;		/* dump_buffer needs access to this */
-} working_state;
-
-
-/* Forward declarations */
-METHODDEF(boolean) encode_mcu_huff JPP((j_compress_ptr cinfo,
-					JBLOCKROW *MCU_data));
-METHODDEF(void) finish_pass_huff JPP((j_compress_ptr cinfo));
-#ifdef ENTROPY_OPT_SUPPORTED
-METHODDEF(boolean) encode_mcu_gather JPP((j_compress_ptr cinfo,
-					  JBLOCKROW *MCU_data));
-METHODDEF(void) finish_pass_gather JPP((j_compress_ptr cinfo));
-#endif
-
-
-/*
- * Initialize for a Huffman-compressed scan.
- * If gather_statistics is TRUE, we do not output anything during the scan,
- * just count the Huffman symbols used and generate Huffman code tables.
- */
-
-METHODDEF(void)
-start_pass_huff (j_compress_ptr cinfo, boolean gather_statistics)
-{
-  huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
-  int ci, dctbl, actbl;
-  jpeg_component_info * compptr;
-
-  if (gather_statistics) {
-#ifdef ENTROPY_OPT_SUPPORTED
-    entropy->pub.encode_mcu = encode_mcu_gather;
-    entropy->pub.finish_pass = finish_pass_gather;
-#else
-    ERREXIT(cinfo, JERR_NOT_COMPILED);
-#endif
-  } else {
-    entropy->pub.encode_mcu = encode_mcu_huff;
-    entropy->pub.finish_pass = finish_pass_huff;
-  }
-
-  for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
-    compptr = cinfo->cur_comp_info[ci];
-    dctbl = compptr->dc_tbl_no;
-    actbl = compptr->ac_tbl_no;
-    if (gather_statistics) {
-#ifdef ENTROPY_OPT_SUPPORTED
-      /* Check for invalid table indexes */
-      /* (make_c_derived_tbl does this in the other path) */
-      if (dctbl < 0 || dctbl >= NUM_HUFF_TBLS)
-	ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, dctbl);
-      if (actbl < 0 || actbl >= NUM_HUFF_TBLS)
-	ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, actbl);
-      /* Allocate and zero the statistics tables */
-      /* Note that jpeg_gen_optimal_table expects 257 entries in each table! */
-      if (entropy->dc_count_ptrs[dctbl] == NULL)
-	entropy->dc_count_ptrs[dctbl] = (long *)
-	  (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				      257 * SIZEOF(long));
-      MEMZERO(entropy->dc_count_ptrs[dctbl], 257 * SIZEOF(long));
-      if (entropy->ac_count_ptrs[actbl] == NULL)
-	entropy->ac_count_ptrs[actbl] = (long *)
-	  (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				      257 * SIZEOF(long));
-      MEMZERO(entropy->ac_count_ptrs[actbl], 257 * SIZEOF(long));
-#endif
-    } else {
-      /* Compute derived values for Huffman tables */
-      /* We may do this more than once for a table, but it's not expensive */
-      jpeg_make_c_derived_tbl(cinfo, TRUE, dctbl,
-			      & entropy->dc_derived_tbls[dctbl]);
-      jpeg_make_c_derived_tbl(cinfo, FALSE, actbl,
-			      & entropy->ac_derived_tbls[actbl]);
-    }
-    /* Initialize DC predictions to 0 */
-    entropy->saved.last_dc_val[ci] = 0;
-  }
-
-  /* Initialize bit buffer to empty */
-  entropy->saved.put_buffer = 0;
-  entropy->saved.put_bits = 0;
-
-  /* Initialize restart stuff */
-  entropy->restarts_to_go = cinfo->restart_interval;
-  entropy->next_restart_num = 0;
-}
-
-
-/*
- * Compute the derived values for a Huffman table.
- * This routine also performs some validation checks on the table.
- *
- * Note this is also used by jcphuff.c.
- */
-
-GLOBAL(void)
-jpeg_make_c_derived_tbl (j_compress_ptr cinfo, boolean isDC, int tblno,
-			 c_derived_tbl ** pdtbl)
-{
-  JHUFF_TBL *htbl;
-  c_derived_tbl *dtbl;
-  int p, i, l, lastp, si, maxsymbol;
-  char huffsize[257];
-  unsigned int huffcode[257];
-  unsigned int code;
-
-  /* Note that huffsize[] and huffcode[] are filled in code-length order,
-   * paralleling the order of the symbols themselves in htbl->huffval[].
-   */
-
-  /* Find the input Huffman table */
-  if (tblno < 0 || tblno >= NUM_HUFF_TBLS)
-    ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tblno);
-  htbl =
-    isDC ? cinfo->dc_huff_tbl_ptrs[tblno] : cinfo->ac_huff_tbl_ptrs[tblno];
-  if (htbl == NULL)
-    ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tblno);
-
-  /* Allocate a workspace if we haven't already done so. */
-  if (*pdtbl == NULL)
-    *pdtbl = (c_derived_tbl *)
-      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				  SIZEOF(c_derived_tbl));
-  dtbl = *pdtbl;
-  
-  /* Figure C.1: make table of Huffman code length for each symbol */
-
-  p = 0;
-  for (l = 1; l <= 16; l++) {
-    i = (int) htbl->bits[l];
-    if (i < 0 || p + i > 256)	/* protect against table overrun */
-      ERREXIT(cinfo, JERR_BAD_HUFF_TABLE);
-    while (i--)
-      huffsize[p++] = (char) l;
-  }
-  huffsize[p] = 0;
-  lastp = p;
-  
-  /* Figure C.2: generate the codes themselves */
-  /* We also validate that the counts represent a legal Huffman code tree. */
-
-  code = 0;
-  si = huffsize[0];
-  p = 0;
-  while (huffsize[p]) {
-    while (((int) huffsize[p]) == si) {
-      huffcode[p++] = code;
-      code++;
-    }
-    /* code is now 1 more than the last code used for codelength si; but
-     * it must still fit in si bits, since no code is allowed to be all ones.
-     */
-    if (((INT32) code) >= (((INT32) 1) << si))
-      ERREXIT(cinfo, JERR_BAD_HUFF_TABLE);
-    code <<= 1;
-    si++;
-  }
-  
-  /* Figure C.3: generate encoding tables */
-  /* These are code and size indexed by symbol value */
-
-  /* Set all codeless symbols to have code length 0;
-   * this lets us detect duplicate VAL entries here, and later
-   * allows emit_bits to detect any attempt to emit such symbols.
-   */
-  MEMZERO(dtbl->ehufsi, SIZEOF(dtbl->ehufsi));
-
-  /* This is also a convenient place to check for out-of-range
-   * and duplicated VAL entries.  We allow 0..255 for AC symbols
-   * but only 0..15 for DC.  (We could constrain them further
-   * based on data depth and mode, but this seems enough.)
-   */
-  maxsymbol = isDC ? 15 : 255;
-
-  for (p = 0; p < lastp; p++) {
-    i = htbl->huffval[p];
-    if (i < 0 || i > maxsymbol || dtbl->ehufsi[i])
-      ERREXIT(cinfo, JERR_BAD_HUFF_TABLE);
-    dtbl->ehufco[i] = huffcode[p];
-    dtbl->ehufsi[i] = huffsize[p];
-  }
-}
-
-
-/* Outputting bytes to the file */
-
-/* Emit a byte, taking 'action' if must suspend. */
-#define emit_byte(state,val,action)  \
-	{ *(state)->next_output_byte++ = (JOCTET) (val);  \
-	  if (--(state)->free_in_buffer == 0)  \
-	    if (! dump_buffer(state))  \
-	      { action; } }
-
-
-LOCAL(boolean)
-dump_buffer (working_state * state)
-/* Empty the output buffer; return TRUE if successful, FALSE if must suspend */
-{
-  struct jpeg_destination_mgr * dest = state->cinfo->dest;
-
-  if (! (*dest->empty_output_buffer) (state->cinfo))
-    return FALSE;
-  /* After a successful buffer dump, must reset buffer pointers */
-  state->next_output_byte = dest->next_output_byte;
-  state->free_in_buffer = dest->free_in_buffer;
-  return TRUE;
-}
-
-
-/* Outputting bits to the file */
-
-/* Only the right 24 bits of put_buffer are used; the valid bits are
- * left-justified in this part.  At most 16 bits can be passed to emit_bits
- * in one call, and we never retain more than 7 bits in put_buffer
- * between calls, so 24 bits are sufficient.
- */
-
-INLINE
-LOCAL(boolean)
-emit_bits (working_state * state, unsigned int code, int size)
-/* Emit some bits; return TRUE if successful, FALSE if must suspend */
-{
-  /* This routine is heavily used, so it's worth coding tightly. */
-  register INT32 put_buffer = (INT32) code;
-  register int put_bits = state->cur.put_bits;
-
-  /* if size is 0, caller used an invalid Huffman table entry */
-  if (size == 0)
-    ERREXIT(state->cinfo, JERR_HUFF_MISSING_CODE);
-
-  put_buffer &= (((INT32) 1)<<size) - 1; /* mask off any extra bits in code */
-  
-  put_bits += size;		/* new number of bits in buffer */
-  
-  put_buffer <<= 24 - put_bits; /* align incoming bits */
-
-  put_buffer |= state->cur.put_buffer; /* and merge with old buffer contents */
-  
-  while (put_bits >= 8) {
-    int c = (int) ((put_buffer >> 16) & 0xFF);
-    
-    emit_byte(state, c, return FALSE);
-    if (c == 0xFF) {		/* need to stuff a zero byte? */
-      emit_byte(state, 0, return FALSE);
-    }
-    put_buffer <<= 8;
-    put_bits -= 8;
-  }
-
-  state->cur.put_buffer = put_buffer; /* update state variables */
-  state->cur.put_bits = put_bits;
-
-  return TRUE;
-}
-
-
-LOCAL(boolean)
-flush_bits (working_state * state)
-{
-  if (! emit_bits(state, 0x7F, 7)) /* fill any partial byte with ones */
-    return FALSE;
-  state->cur.put_buffer = 0;	/* and reset bit-buffer to empty */
-  state->cur.put_bits = 0;
-  return TRUE;
-}
-
-
-/* Encode a single block's worth of coefficients */
-
-LOCAL(boolean)
-encode_one_block (working_state * state, JCOEFPTR block, int last_dc_val,
-		  c_derived_tbl *dctbl, c_derived_tbl *actbl)
-{
-  register int temp, temp2;
-  register int nbits;
-  register int k, r, i;
-  
-  /* Encode the DC coefficient difference per section F.1.2.1 */
-  
-  temp = temp2 = block[0] - last_dc_val;
-
-  if (temp < 0) {
-    temp = -temp;		/* temp is abs value of input */
-    /* For a negative input, want temp2 = bitwise complement of abs(input) */
-    /* This code assumes we are on a two's complement machine */
-    temp2--;
-  }
-  
-  /* Find the number of bits needed for the magnitude of the coefficient */
-  nbits = 0;
-  while (temp) {
-    nbits++;
-    temp >>= 1;
-  }
-  /* Check for out-of-range coefficient values.
-   * Since we're encoding a difference, the range limit is twice as much.
-   */
-  if (nbits > MAX_COEF_BITS+1)
-    ERREXIT(state->cinfo, JERR_BAD_DCT_COEF);
-  
-  /* Emit the Huffman-coded symbol for the number of bits */
-  if (! emit_bits(state, dctbl->ehufco[nbits], dctbl->ehufsi[nbits]))
-    return FALSE;
-
-  /* Emit that number of bits of the value, if positive, */
-  /* or the complement of its magnitude, if negative. */
-  if (nbits)			/* emit_bits rejects calls with size 0 */
-    if (! emit_bits(state, (unsigned int) temp2, nbits))
-      return FALSE;
-
-  /* Encode the AC coefficients per section F.1.2.2 */
-  
-  r = 0;			/* r = run length of zeros */
-  
-  for (k = 1; k < DCTSIZE2; k++) {
-    if ((temp = block[jpeg_natural_order[k]]) == 0) {
-      r++;
-    } else {
-      /* if run length > 15, must emit special run-length-16 codes (0xF0) */
-      while (r > 15) {
-	if (! emit_bits(state, actbl->ehufco[0xF0], actbl->ehufsi[0xF0]))
-	  return FALSE;
-	r -= 16;
-      }
-
-      temp2 = temp;
-      if (temp < 0) {
-	temp = -temp;		/* temp is abs value of input */
-	/* This code assumes we are on a two's complement machine */
-	temp2--;
-      }
-      
-      /* Find the number of bits needed for the magnitude of the coefficient */
-      nbits = 1;		/* there must be at least one 1 bit */
-      while ((temp >>= 1))
-	nbits++;
-      /* Check for out-of-range coefficient values */
-      if (nbits > MAX_COEF_BITS)
-	ERREXIT(state->cinfo, JERR_BAD_DCT_COEF);
-      
-      /* Emit Huffman symbol for run length / number of bits */
-      i = (r << 4) + nbits;
-      if (! emit_bits(state, actbl->ehufco[i], actbl->ehufsi[i]))
-	return FALSE;
-
-      /* Emit that number of bits of the value, if positive, */
-      /* or the complement of its magnitude, if negative. */
-      if (! emit_bits(state, (unsigned int) temp2, nbits))
-	return FALSE;
-      
-      r = 0;
-    }
-  }
-
-  /* If the last coef(s) were zero, emit an end-of-block code */
-  if (r > 0)
-    if (! emit_bits(state, actbl->ehufco[0], actbl->ehufsi[0]))
-      return FALSE;
-
-  return TRUE;
-}
-
-
-/*
- * Emit a restart marker & resynchronize predictions.
- */
-
-LOCAL(boolean)
-emit_restart (working_state * state, int restart_num)
-{
-  int ci;
-
-  if (! flush_bits(state))
-    return FALSE;
-
-  emit_byte(state, 0xFF, return FALSE);
-  emit_byte(state, JPEG_RST0 + restart_num, return FALSE);
-
-  /* Re-initialize DC predictions to 0 */
-  for (ci = 0; ci < state->cinfo->comps_in_scan; ci++)
-    state->cur.last_dc_val[ci] = 0;
-
-  /* The restart counter is not updated until we successfully write the MCU. */
-
-  return TRUE;
-}
-
-
-/*
- * Encode and output one MCU's worth of Huffman-compressed coefficients.
- */
-
-METHODDEF(boolean)
-encode_mcu_huff (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
-{
-  huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
-  working_state state;
-  int blkn, ci;
-  jpeg_component_info * compptr;
-
-  /* Load up working state */
-  state.next_output_byte = cinfo->dest->next_output_byte;
-  state.free_in_buffer = cinfo->dest->free_in_buffer;
-  ASSIGN_STATE(state.cur, entropy->saved);
-  state.cinfo = cinfo;
-
-  /* Emit restart marker if needed */
-  if (cinfo->restart_interval) {
-    if (entropy->restarts_to_go == 0)
-      if (! emit_restart(&state, entropy->next_restart_num))
-	return FALSE;
-  }
-
-  /* Encode the MCU data blocks */
-  for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
-    ci = cinfo->MCU_membership[blkn];
-    compptr = cinfo->cur_comp_info[ci];
-    if (! encode_one_block(&state,
-			   MCU_data[blkn][0], state.cur.last_dc_val[ci],
-			   entropy->dc_derived_tbls[compptr->dc_tbl_no],
-			   entropy->ac_derived_tbls[compptr->ac_tbl_no]))
-      return FALSE;
-    /* Update last_dc_val */
-    state.cur.last_dc_val[ci] = MCU_data[blkn][0][0];
-  }
-
-  /* Completed MCU, so update state */
-  cinfo->dest->next_output_byte = state.next_output_byte;
-  cinfo->dest->free_in_buffer = state.free_in_buffer;
-  ASSIGN_STATE(entropy->saved, state.cur);
-
-  /* Update restart-interval state too */
-  if (cinfo->restart_interval) {
-    if (entropy->restarts_to_go == 0) {
-      entropy->restarts_to_go = cinfo->restart_interval;
-      entropy->next_restart_num++;
-      entropy->next_restart_num &= 7;
-    }
-    entropy->restarts_to_go--;
-  }
-
-  return TRUE;
-}
-
-
-/*
- * Finish up at the end of a Huffman-compressed scan.
- */
-
-METHODDEF(void)
-finish_pass_huff (j_compress_ptr cinfo)
-{
-  huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
-  working_state state;
-
-  /* Load up working state ... flush_bits needs it */
-  state.next_output_byte = cinfo->dest->next_output_byte;
-  state.free_in_buffer = cinfo->dest->free_in_buffer;
-  ASSIGN_STATE(state.cur, entropy->saved);
-  state.cinfo = cinfo;
-
-  /* Flush out the last data */
-  if (! flush_bits(&state))
-    ERREXIT(cinfo, JERR_CANT_SUSPEND);
-
-  /* Update state */
-  cinfo->dest->next_output_byte = state.next_output_byte;
-  cinfo->dest->free_in_buffer = state.free_in_buffer;
-  ASSIGN_STATE(entropy->saved, state.cur);
-}
-
-
-/*
- * Huffman coding optimization.
- *
- * We first scan the supplied data and count the number of uses of each symbol
- * that is to be Huffman-coded. (This process MUST agree with the code above.)
- * Then we build a Huffman coding tree for the observed counts.
- * Symbols which are not needed at all for the particular image are not
- * assigned any code, which saves space in the DHT marker as well as in
- * the compressed data.
- */
-
-#ifdef ENTROPY_OPT_SUPPORTED
-
-
-/* Process a single block's worth of coefficients */
-
-LOCAL(void)
-htest_one_block (j_compress_ptr cinfo, JCOEFPTR block, int last_dc_val,
-		 long dc_counts[], long ac_counts[])
-{
-  register int temp;
-  register int nbits;
-  register int k, r;
-  
-  /* Encode the DC coefficient difference per section F.1.2.1 */
-  
-  temp = block[0] - last_dc_val;
-  if (temp < 0)
-    temp = -temp;
-  
-  /* Find the number of bits needed for the magnitude of the coefficient */
-  nbits = 0;
-  while (temp) {
-    nbits++;
-    temp >>= 1;
-  }
-  /* Check for out-of-range coefficient values.
-   * Since we're encoding a difference, the range limit is twice as much.
-   */
-  if (nbits > MAX_COEF_BITS+1)
-    ERREXIT(cinfo, JERR_BAD_DCT_COEF);
-
-  /* Count the Huffman symbol for the number of bits */
-  dc_counts[nbits]++;
-  
-  /* Encode the AC coefficients per section F.1.2.2 */
-  
-  r = 0;			/* r = run length of zeros */
-  
-  for (k = 1; k < DCTSIZE2; k++) {
-    if ((temp = block[jpeg_natural_order[k]]) == 0) {
-      r++;
-    } else {
-      /* if run length > 15, must emit special run-length-16 codes (0xF0) */
-      while (r > 15) {
-	ac_counts[0xF0]++;
-	r -= 16;
-      }
-      
-      /* Find the number of bits needed for the magnitude of the coefficient */
-      if (temp < 0)
-	temp = -temp;
-      
-      /* Find the number of bits needed for the magnitude of the coefficient */
-      nbits = 1;		/* there must be at least one 1 bit */
-      while ((temp >>= 1))
-	nbits++;
-      /* Check for out-of-range coefficient values */
-      if (nbits > MAX_COEF_BITS)
-	ERREXIT(cinfo, JERR_BAD_DCT_COEF);
-      
-      /* Count Huffman symbol for run length / number of bits */
-      ac_counts[(r << 4) + nbits]++;
-      
-      r = 0;
-    }
-  }
-
-  /* If the last coef(s) were zero, emit an end-of-block code */
-  if (r > 0)
-    ac_counts[0]++;
-}
-
-
-/*
- * Trial-encode one MCU's worth of Huffman-compressed coefficients.
- * No data is actually output, so no suspension return is possible.
- */
-
-METHODDEF(boolean)
-encode_mcu_gather (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
-{
-  huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
-  int blkn, ci;
-  jpeg_component_info * compptr;
-
-  /* Take care of restart intervals if needed */
-  if (cinfo->restart_interval) {
-    if (entropy->restarts_to_go == 0) {
-      /* Re-initialize DC predictions to 0 */
-      for (ci = 0; ci < cinfo->comps_in_scan; ci++)
-	entropy->saved.last_dc_val[ci] = 0;
-      /* Update restart state */
-      entropy->restarts_to_go = cinfo->restart_interval;
-    }
-    entropy->restarts_to_go--;
-  }
-
-  for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
-    ci = cinfo->MCU_membership[blkn];
-    compptr = cinfo->cur_comp_info[ci];
-    htest_one_block(cinfo, MCU_data[blkn][0], entropy->saved.last_dc_val[ci],
-		    entropy->dc_count_ptrs[compptr->dc_tbl_no],
-		    entropy->ac_count_ptrs[compptr->ac_tbl_no]);
-    entropy->saved.last_dc_val[ci] = MCU_data[blkn][0][0];
-  }
-
-  return TRUE;
-}
-
-
-/*
- * Generate the best Huffman code table for the given counts, fill htbl.
- * Note this is also used by jcphuff.c.
- *
- * The JPEG standard requires that no symbol be assigned a codeword of all
- * one bits (so that padding bits added at the end of a compressed segment
- * can't look like a valid code).  Because of the canonical ordering of
- * codewords, this just means that there must be an unused slot in the
- * longest codeword length category.  Section K.2 of the JPEG spec suggests
- * reserving such a slot by pretending that symbol 256 is a valid symbol
- * with count 1.  In theory that's not optimal; giving it count zero but
- * including it in the symbol set anyway should give a better Huffman code.
- * But the theoretically better code actually seems to come out worse in
- * practice, because it produces more all-ones bytes (which incur stuffed
- * zero bytes in the final file).  In any case the difference is tiny.
- *
- * The JPEG standard requires Huffman codes to be no more than 16 bits long.
- * If some symbols have a very small but nonzero probability, the Huffman tree
- * must be adjusted to meet the code length restriction.  We currently use
- * the adjustment method suggested in JPEG section K.2.  This method is *not*
- * optimal; it may not choose the best possible limited-length code.  But
- * typically only very-low-frequency symbols will be given less-than-optimal
- * lengths, so the code is almost optimal.  Experimental comparisons against
- * an optimal limited-length-code algorithm indicate that the difference is
- * microscopic --- usually less than a hundredth of a percent of total size.
- * So the extra complexity of an optimal algorithm doesn't seem worthwhile.
- */
-
-GLOBAL(void)
-jpeg_gen_optimal_table (j_compress_ptr cinfo, JHUFF_TBL * htbl, long freq[])
-{
-#define MAX_CLEN 32		/* assumed maximum initial code length */
-  UINT8 bits[MAX_CLEN+1];	/* bits[k] = # of symbols with code length k */
-  int codesize[257];		/* codesize[k] = code length of symbol k */
-  int others[257];		/* next symbol in current branch of tree */
-  int c1, c2;
-  int p, i, j;
-  long v;
-
-  /* This algorithm is explained in section K.2 of the JPEG standard */
-
-  MEMZERO(bits, SIZEOF(bits));
-  MEMZERO(codesize, SIZEOF(codesize));
-  for (i = 0; i < 257; i++)
-    others[i] = -1;		/* init links to empty */
-  
-  freq[256] = 1;		/* make sure 256 has a nonzero count */
-  /* Including the pseudo-symbol 256 in the Huffman procedure guarantees
-   * that no real symbol is given code-value of all ones, because 256
-   * will be placed last in the largest codeword category.
-   */
-
-  /* Huffman's basic algorithm to assign optimal code lengths to symbols */
-
-  for (;;) {
-    /* Find the smallest nonzero frequency, set c1 = its symbol */
-    /* In case of ties, take the larger symbol number */
-    c1 = -1;
-    v = 1000000000L;
-    for (i = 0; i <= 256; i++) {
-      if (freq[i] && freq[i] <= v) {
-	v = freq[i];
-	c1 = i;
-      }
-    }
-
-    /* Find the next smallest nonzero frequency, set c2 = its symbol */
-    /* In case of ties, take the larger symbol number */
-    c2 = -1;
-    v = 1000000000L;
-    for (i = 0; i <= 256; i++) {
-      if (freq[i] && freq[i] <= v && i != c1) {
-	v = freq[i];
-	c2 = i;
-      }
-    }
-
-    /* Done if we've merged everything into one frequency */
-    if (c2 < 0)
-      break;
-    
-    /* Else merge the two counts/trees */
-    freq[c1] += freq[c2];
-    freq[c2] = 0;
-
-    /* Increment the codesize of everything in c1's tree branch */
-    codesize[c1]++;
-    while (others[c1] >= 0) {
-      c1 = others[c1];
-      codesize[c1]++;
-    }
-    
-    others[c1] = c2;		/* chain c2 onto c1's tree branch */
-    
-    /* Increment the codesize of everything in c2's tree branch */
-    codesize[c2]++;
-    while (others[c2] >= 0) {
-      c2 = others[c2];
-      codesize[c2]++;
-    }
-  }
-
-  /* Now count the number of symbols of each code length */
-  for (i = 0; i <= 256; i++) {
-    if (codesize[i]) {
-      /* The JPEG standard seems to think that this can't happen, */
-      /* but I'm paranoid... */
-      if (codesize[i] > MAX_CLEN)
-	ERREXIT(cinfo, JERR_HUFF_CLEN_OVERFLOW);
-
-      bits[codesize[i]]++;
-    }
-  }
-
-  /* JPEG doesn't allow symbols with code lengths over 16 bits, so if the pure
-   * Huffman procedure assigned any such lengths, we must adjust the coding.
-   * Here is what the JPEG spec says about how this next bit works:
-   * Since symbols are paired for the longest Huffman code, the symbols are
-   * removed from this length category two at a time.  The prefix for the pair
-   * (which is one bit shorter) is allocated to one of the pair; then,
-   * skipping the BITS entry for that prefix length, a code word from the next
-   * shortest nonzero BITS entry is converted into a prefix for two code words
-   * one bit longer.
-   */
-  
-  for (i = MAX_CLEN; i > 16; i--) {
-    while (bits[i] > 0) {
-      j = i - 2;		/* find length of new prefix to be used */
-      while (bits[j] == 0)
-	j--;
-      
-      bits[i] -= 2;		/* remove two symbols */
-      bits[i-1]++;		/* one goes in this length */
-      bits[j+1] += 2;		/* two new symbols in this length */
-      bits[j]--;		/* symbol of this length is now a prefix */
-    }
-  }
-
-  /* Remove the count for the pseudo-symbol 256 from the largest codelength */
-  while (bits[i] == 0)		/* find largest codelength still in use */
-    i--;
-  bits[i]--;
-  
-  /* Return final symbol counts (only for lengths 0..16) */
-  MEMCOPY(htbl->bits, bits, SIZEOF(htbl->bits));
-  
-  /* Return a list of the symbols sorted by code length */
-  /* It's not real clear to me why we don't need to consider the codelength
-   * changes made above, but the JPEG spec seems to think this works.
-   */
-  p = 0;
-  for (i = 1; i <= MAX_CLEN; i++) {
-    for (j = 0; j <= 255; j++) {
-      if (codesize[j] == i) {
-	htbl->huffval[p] = (UINT8) j;
-	p++;
-      }
-    }
-  }
-
-  /* Set sent_table FALSE so updated table will be written to JPEG file. */
-  htbl->sent_table = FALSE;
-}
-
-
-/*
- * Finish up a statistics-gathering pass and create the new Huffman tables.
- */
-
-METHODDEF(void)
-finish_pass_gather (j_compress_ptr cinfo)
-{
-  huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
-  int ci, dctbl, actbl;
-  jpeg_component_info * compptr;
-  JHUFF_TBL **htblptr;
-  boolean did_dc[NUM_HUFF_TBLS];
-  boolean did_ac[NUM_HUFF_TBLS];
-
-  /* It's important not to apply jpeg_gen_optimal_table more than once
-   * per table, because it clobbers the input frequency counts!
-   */
-  MEMZERO(did_dc, SIZEOF(did_dc));
-  MEMZERO(did_ac, SIZEOF(did_ac));
-
-  for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
-    compptr = cinfo->cur_comp_info[ci];
-    dctbl = compptr->dc_tbl_no;
-    actbl = compptr->ac_tbl_no;
-    if (! did_dc[dctbl]) {
-      htblptr = & cinfo->dc_huff_tbl_ptrs[dctbl];
-      if (*htblptr == NULL)
-	*htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo);
-      jpeg_gen_optimal_table(cinfo, *htblptr, entropy->dc_count_ptrs[dctbl]);
-      did_dc[dctbl] = TRUE;
-    }
-    if (! did_ac[actbl]) {
-      htblptr = & cinfo->ac_huff_tbl_ptrs[actbl];
-      if (*htblptr == NULL)
-	*htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo);
-      jpeg_gen_optimal_table(cinfo, *htblptr, entropy->ac_count_ptrs[actbl]);
-      did_ac[actbl] = TRUE;
-    }
-  }
-}
-
-
-#endif /* ENTROPY_OPT_SUPPORTED */
-
-
-/*
- * Module initialization routine for Huffman entropy encoding.
- */
-
-GLOBAL(void)
-jinit_huff_encoder (j_compress_ptr cinfo)
-{
-  huff_entropy_ptr entropy;
-  int i;
-
-  entropy = (huff_entropy_ptr)
-    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				SIZEOF(huff_entropy_encoder));
-  cinfo->entropy = (struct jpeg_entropy_encoder *) entropy;
-  entropy->pub.start_pass = start_pass_huff;
-
-  /* Mark tables unallocated */
-  for (i = 0; i < NUM_HUFF_TBLS; i++) {
-    entropy->dc_derived_tbls[i] = entropy->ac_derived_tbls[i] = NULL;
-#ifdef ENTROPY_OPT_SUPPORTED
-    entropy->dc_count_ptrs[i] = entropy->ac_count_ptrs[i] = NULL;
-#endif
-  }
-}

Engine/lib/ljpeg/jchuff.h

@@ -1,47 +0,0 @@
-/*
- * jchuff.h
- *
- * Copyright (C) 1991-1997, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains declarations for Huffman entropy encoding routines
- * that are shared between the sequential encoder (jchuff.c) and the
- * progressive encoder (jcphuff.c).  No other modules need to see these.
- */
-
-/* The legal range of a DCT coefficient is
- *  -1024 .. +1023  for 8-bit data;
- * -16384 .. +16383 for 12-bit data.
- * Hence the magnitude should always fit in 10 or 14 bits respectively.
- */
-
-#if BITS_IN_JSAMPLE == 8
-#define MAX_COEF_BITS 10
-#else
-#define MAX_COEF_BITS 14
-#endif
-
-/* Derived data constructed for each Huffman table */
-
-typedef struct {
-  unsigned int ehufco[256];	/* code for each symbol */
-  char ehufsi[256];		/* length of code for each symbol */
-  /* If no code has been allocated for a symbol S, ehufsi[S] contains 0 */
-} c_derived_tbl;
-
-/* Short forms of external names for systems with brain-damaged linkers. */
-
-#ifdef NEED_SHORT_EXTERNAL_NAMES
-#define jpeg_make_c_derived_tbl	jMkCDerived
-#define jpeg_gen_optimal_table	jGenOptTbl
-#endif /* NEED_SHORT_EXTERNAL_NAMES */
-
-/* Expand a Huffman table definition into the derived format */
-EXTERN(void) jpeg_make_c_derived_tbl
-	JPP((j_compress_ptr cinfo, boolean isDC, int tblno,
-	     c_derived_tbl ** pdtbl));
-
-/* Generate an optimal table definition given the specified counts */
-EXTERN(void) jpeg_gen_optimal_table
-	JPP((j_compress_ptr cinfo, JHUFF_TBL * htbl, long freq[]));

Engine/lib/ljpeg/jcinit.c

@@ -1,72 +0,0 @@
-/*
- * jcinit.c
- *
- * Copyright (C) 1991-1997, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains initialization logic for the JPEG compressor.
- * This routine is in charge of selecting the modules to be executed and
- * making an initialization call to each one.
- *
- * Logically, this code belongs in jcmaster.c.  It's split out because
- * linking this routine implies linking the entire compression library.
- * For a transcoding-only application, we want to be able to use jcmaster.c
- * without linking in the whole library.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-
-
-/*
- * Master selection of compression modules.
- * This is done once at the start of processing an image.  We determine
- * which modules will be used and give them appropriate initialization calls.
- */
-
-GLOBAL(void)
-jinit_compress_master (j_compress_ptr cinfo)
-{
-  /* Initialize master control (includes parameter checking/processing) */
-  jinit_c_master_control(cinfo, FALSE /* full compression */);
-
-  /* Preprocessing */
-  if (! cinfo->raw_data_in) {
-    jinit_color_converter(cinfo);
-    jinit_downsampler(cinfo);
-    jinit_c_prep_controller(cinfo, FALSE /* never need full buffer here */);
-  }
-  /* Forward DCT */
-  jinit_forward_dct(cinfo);
-  /* Entropy encoding: either Huffman or arithmetic coding. */
-  if (cinfo->arith_code) {
-    ERREXIT(cinfo, JERR_ARITH_NOTIMPL);
-  } else {
-    if (cinfo->progressive_mode) {
-#ifdef C_PROGRESSIVE_SUPPORTED
-      jinit_phuff_encoder(cinfo);
-#else
-      ERREXIT(cinfo, JERR_NOT_COMPILED);
-#endif
-    } else
-      jinit_huff_encoder(cinfo);
-  }
-
-  /* Need a full-image coefficient buffer in any multi-pass mode. */
-  jinit_c_coef_controller(cinfo,
-		(boolean) (cinfo->num_scans > 1 || cinfo->optimize_coding));
-  jinit_c_main_controller(cinfo, FALSE /* never need full buffer here */);
-
-  jinit_marker_writer(cinfo);
-
-  /* We can now tell the memory manager to allocate virtual arrays. */
-  (*cinfo->mem->realize_virt_arrays) ((j_common_ptr) cinfo);
-
-  /* Write the datastream header (SOI) immediately.
-   * Frame and scan headers are postponed till later.
-   * This lets application insert special markers after the SOI.
-   */
-  (*cinfo->marker->write_file_header) (cinfo);
-}

Engine/lib/ljpeg/jcmainct.c

@@ -1,293 +0,0 @@
-/*
- * jcmainct.c
- *
- * Copyright (C) 1994-1996, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains the main buffer controller for compression.
- * The main buffer lies between the pre-processor and the JPEG
- * compressor proper; it holds downsampled data in the JPEG colorspace.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-
-
-/* Note: currently, there is no operating mode in which a full-image buffer
- * is needed at this step.  If there were, that mode could not be used with
- * "raw data" input, since this module is bypassed in that case.  However,
- * we've left the code here for possible use in special applications.
- */
-#undef FULL_MAIN_BUFFER_SUPPORTED
-
-
-/* Private buffer controller object */
-
-typedef struct {
-  struct jpeg_c_main_controller pub; /* public fields */
-
-  JDIMENSION cur_iMCU_row;	/* number of current iMCU row */
-  JDIMENSION rowgroup_ctr;	/* counts row groups received in iMCU row */
-  boolean suspended;		/* remember if we suspended output */
-  J_BUF_MODE pass_mode;		/* current operating mode */
-
-  /* If using just a strip buffer, this points to the entire set of buffers
-   * (we allocate one for each component).  In the full-image case, this
-   * points to the currently accessible strips of the virtual arrays.
-   */
-  JSAMPARRAY buffer[MAX_COMPONENTS];
-
-#ifdef FULL_MAIN_BUFFER_SUPPORTED
-  /* If using full-image storage, this array holds pointers to virtual-array
-   * control blocks for each component.  Unused if not full-image storage.
-   */
-  jvirt_sarray_ptr whole_image[MAX_COMPONENTS];
-#endif
-} my_main_controller;
-
-typedef my_main_controller * my_main_ptr;
-
-
-/* Forward declarations */
-METHODDEF(void) process_data_simple_main
-	JPP((j_compress_ptr cinfo, JSAMPARRAY input_buf,
-	     JDIMENSION *in_row_ctr, JDIMENSION in_rows_avail));
-#ifdef FULL_MAIN_BUFFER_SUPPORTED
-METHODDEF(void) process_data_buffer_main
-	JPP((j_compress_ptr cinfo, JSAMPARRAY input_buf,
-	     JDIMENSION *in_row_ctr, JDIMENSION in_rows_avail));
-#endif
-
-
-/*
- * Initialize for a processing pass.
- */
-
-METHODDEF(void)
-start_pass_main (j_compress_ptr cinfo, J_BUF_MODE pass_mode)
-{
-  my_main_ptr main = (my_main_ptr) cinfo->main;
-
-  /* Do nothing in raw-data mode. */
-  if (cinfo->raw_data_in)
-    return;
-
-  main->cur_iMCU_row = 0;	/* initialize counters */
-  main->rowgroup_ctr = 0;
-  main->suspended = FALSE;
-  main->pass_mode = pass_mode;	/* save mode for use by process_data */
-
-  switch (pass_mode) {
-  case JBUF_PASS_THRU:
-#ifdef FULL_MAIN_BUFFER_SUPPORTED
-    if (main->whole_image[0] != NULL)
-      ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
-#endif
-    main->pub.process_data = process_data_simple_main;
-    break;
-#ifdef FULL_MAIN_BUFFER_SUPPORTED
-  case JBUF_SAVE_SOURCE:
-  case JBUF_CRANK_DEST:
-  case JBUF_SAVE_AND_PASS:
-    if (main->whole_image[0] == NULL)
-      ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
-    main->pub.process_data = process_data_buffer_main;
-    break;
-#endif
-  default:
-    ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
-    break;
-  }
-}
-
-
-/*
- * Process some data.
- * This routine handles the simple pass-through mode,
- * where we have only a strip buffer.
- */
-
-METHODDEF(void)
-process_data_simple_main (j_compress_ptr cinfo,
-			  JSAMPARRAY input_buf, JDIMENSION *in_row_ctr,
-			  JDIMENSION in_rows_avail)
-{
-  my_main_ptr main = (my_main_ptr) cinfo->main;
-
-  while (main->cur_iMCU_row < cinfo->total_iMCU_rows) {
-    /* Read input data if we haven't filled the main buffer yet */
-    if (main->rowgroup_ctr < DCTSIZE)
-      (*cinfo->prep->pre_process_data) (cinfo,
-					input_buf, in_row_ctr, in_rows_avail,
-					main->buffer, &main->rowgroup_ctr,
-					(JDIMENSION) DCTSIZE);
-
-    /* If we don't have a full iMCU row buffered, return to application for
-     * more data.  Note that preprocessor will always pad to fill the iMCU row
-     * at the bottom of the image.
-     */
-    if (main->rowgroup_ctr != DCTSIZE)
-      return;
-
-    /* Send the completed row to the compressor */
-    if (! (*cinfo->coef->compress_data) (cinfo, main->buffer)) {
-      /* If compressor did not consume the whole row, then we must need to
-       * suspend processing and return to the application.  In this situation
-       * we pretend we didn't yet consume the last input row; otherwise, if
-       * it happened to be the last row of the image, the application would
-       * think we were done.
-       */
-      if (! main->suspended) {
-	(*in_row_ctr)--;
-	main->suspended = TRUE;
-      }
-      return;
-    }
-    /* We did finish the row.  Undo our little suspension hack if a previous
-     * call suspended; then mark the main buffer empty.
-     */
-    if (main->suspended) {
-      (*in_row_ctr)++;
-      main->suspended = FALSE;
-    }
-    main->rowgroup_ctr = 0;
-    main->cur_iMCU_row++;
-  }
-}
-
-
-#ifdef FULL_MAIN_BUFFER_SUPPORTED
-
-/*
- * Process some data.
- * This routine handles all of the modes that use a full-size buffer.
- */
-
-METHODDEF(void)
-process_data_buffer_main (j_compress_ptr cinfo,
-			  JSAMPARRAY input_buf, JDIMENSION *in_row_ctr,
-			  JDIMENSION in_rows_avail)
-{
-  my_main_ptr main = (my_main_ptr) cinfo->main;
-  int ci;
-  jpeg_component_info *compptr;
-  boolean writing = (main->pass_mode != JBUF_CRANK_DEST);
-
-  while (main->cur_iMCU_row < cinfo->total_iMCU_rows) {
-    /* Realign the virtual buffers if at the start of an iMCU row. */
-    if (main->rowgroup_ctr == 0) {
-      for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
-	   ci++, compptr++) {
-	main->buffer[ci] = (*cinfo->mem->access_virt_sarray)
-	  ((j_common_ptr) cinfo, main->whole_image[ci],
-	   main->cur_iMCU_row * (compptr->v_samp_factor * DCTSIZE),
-	   (JDIMENSION) (compptr->v_samp_factor * DCTSIZE), writing);
-      }
-      /* In a read pass, pretend we just read some source data. */
-      if (! writing) {
-	*in_row_ctr += cinfo->max_v_samp_factor * DCTSIZE;
-	main->rowgroup_ctr = DCTSIZE;
-      }
-    }
-
-    /* If a write pass, read input data until the current iMCU row is full. */
-    /* Note: preprocessor will pad if necessary to fill the last iMCU row. */
-    if (writing) {
-      (*cinfo->prep->pre_process_data) (cinfo,
-					input_buf, in_row_ctr, in_rows_avail,
-					main->buffer, &main->rowgroup_ctr,
-					(JDIMENSION) DCTSIZE);
-      /* Return to application if we need more data to fill the iMCU row. */
-      if (main->rowgroup_ctr < DCTSIZE)
-	return;
-    }
-
-    /* Emit data, unless this is a sink-only pass. */
-    if (main->pass_mode != JBUF_SAVE_SOURCE) {
-      if (! (*cinfo->coef->compress_data) (cinfo, main->buffer)) {
-	/* If compressor did not consume the whole row, then we must need to
-	 * suspend processing and return to the application.  In this situation
-	 * we pretend we didn't yet consume the last input row; otherwise, if
-	 * it happened to be the last row of the image, the application would
-	 * think we were done.
-	 */
-	if (! main->suspended) {
-	  (*in_row_ctr)--;
-	  main->suspended = TRUE;
-	}
-	return;
-      }
-      /* We did finish the row.  Undo our little suspension hack if a previous
-       * call suspended; then mark the main buffer empty.
-       */
-      if (main->suspended) {
-	(*in_row_ctr)++;
-	main->suspended = FALSE;
-      }
-    }
-
-    /* If get here, we are done with this iMCU row.  Mark buffer empty. */
-    main->rowgroup_ctr = 0;
-    main->cur_iMCU_row++;
-  }
-}
-
-#endif /* FULL_MAIN_BUFFER_SUPPORTED */
-
-
-/*
- * Initialize main buffer controller.
- */
-
-GLOBAL(void)
-jinit_c_main_controller (j_compress_ptr cinfo, boolean need_full_buffer)
-{
-  my_main_ptr main;
-  int ci;
-  jpeg_component_info *compptr;
-
-  main = (my_main_ptr)
-    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				SIZEOF(my_main_controller));
-  cinfo->main = (struct jpeg_c_main_controller *) main;
-  main->pub.start_pass = start_pass_main;
-
-  /* We don't need to create a buffer in raw-data mode. */
-  if (cinfo->raw_data_in)
-    return;
-
-  /* Create the buffer.  It holds downsampled data, so each component
-   * may be of a different size.
-   */
-  if (need_full_buffer) {
-#ifdef FULL_MAIN_BUFFER_SUPPORTED
-    /* Allocate a full-image virtual array for each component */
-    /* Note we pad the bottom to a multiple of the iMCU height */
-    for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
-	 ci++, compptr++) {
-      main->whole_image[ci] = (*cinfo->mem->request_virt_sarray)
-	((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE,
-	 compptr->width_in_blocks * DCTSIZE,
-	 (JDIMENSION) jround_up((long) compptr->height_in_blocks,
-				(long) compptr->v_samp_factor) * DCTSIZE,
-	 (JDIMENSION) (compptr->v_samp_factor * DCTSIZE));
-    }
-#else
-    ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
-#endif
-  } else {
-#ifdef FULL_MAIN_BUFFER_SUPPORTED
-    main->whole_image[0] = NULL; /* flag for no virtual arrays */
-#endif
-    /* Allocate a strip buffer for each component */
-    for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
-	 ci++, compptr++) {
-      main->buffer[ci] = (*cinfo->mem->alloc_sarray)
-	((j_common_ptr) cinfo, JPOOL_IMAGE,
-	 compptr->width_in_blocks * DCTSIZE,
-	 (JDIMENSION) (compptr->v_samp_factor * DCTSIZE));
-    }
-  }
-}

Engine/lib/ljpeg/jcmarker.c

@@ -1,664 +0,0 @@
-/*
- * jcmarker.c
- *
- * Copyright (C) 1991-1998, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains routines to write JPEG datastream markers.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-
-
-typedef enum {			/* JPEG marker codes */
-  M_SOF0  = 0xc0,
-  M_SOF1  = 0xc1,
-  M_SOF2  = 0xc2,
-  M_SOF3  = 0xc3,
-  
-  M_SOF5  = 0xc5,
-  M_SOF6  = 0xc6,
-  M_SOF7  = 0xc7,
-  
-  M_JPG   = 0xc8,
-  M_SOF9  = 0xc9,
-  M_SOF10 = 0xca,
-  M_SOF11 = 0xcb,
-  
-  M_SOF13 = 0xcd,
-  M_SOF14 = 0xce,
-  M_SOF15 = 0xcf,
-  
-  M_DHT   = 0xc4,
-  
-  M_DAC   = 0xcc,
-  
-  M_RST0  = 0xd0,
-  M_RST1  = 0xd1,
-  M_RST2  = 0xd2,
-  M_RST3  = 0xd3,
-  M_RST4  = 0xd4,
-  M_RST5  = 0xd5,
-  M_RST6  = 0xd6,
-  M_RST7  = 0xd7,
-  
-  M_SOI   = 0xd8,
-  M_EOI   = 0xd9,
-  M_SOS   = 0xda,
-  M_DQT   = 0xdb,
-  M_DNL   = 0xdc,
-  M_DRI   = 0xdd,
-  M_DHP   = 0xde,
-  M_EXP   = 0xdf,
-  
-  M_APP0  = 0xe0,
-  M_APP1  = 0xe1,
-  M_APP2  = 0xe2,
-  M_APP3  = 0xe3,
-  M_APP4  = 0xe4,
-  M_APP5  = 0xe5,
-  M_APP6  = 0xe6,
-  M_APP7  = 0xe7,
-  M_APP8  = 0xe8,
-  M_APP9  = 0xe9,
-  M_APP10 = 0xea,
-  M_APP11 = 0xeb,
-  M_APP12 = 0xec,
-  M_APP13 = 0xed,
-  M_APP14 = 0xee,
-  M_APP15 = 0xef,
-  
-  M_JPG0  = 0xf0,
-  M_JPG13 = 0xfd,
-  M_COM   = 0xfe,
-  
-  M_TEM   = 0x01,
-  
-  M_ERROR = 0x100
-} JPEG_MARKER;
-
-
-/* Private state */
-
-typedef struct {
-  struct jpeg_marker_writer pub; /* public fields */
-
-  unsigned int last_restart_interval; /* last DRI value emitted; 0 after SOI */
-} my_marker_writer;
-
-typedef my_marker_writer * my_marker_ptr;
-
-
-/*
- * Basic output routines.
- *
- * Note that we do not support suspension while writing a marker.
- * Therefore, an application using suspension must ensure that there is
- * enough buffer space for the initial markers (typ. 600-700 bytes) before
- * calling jpeg_start_compress, and enough space to write the trailing EOI
- * (a few bytes) before calling jpeg_finish_compress.  Multipass compression
- * modes are not supported at all with suspension, so those two are the only
- * points where markers will be written.
- */
-
-LOCAL(void)
-emit_byte (j_compress_ptr cinfo, int val)
-/* Emit a byte */
-{
-  struct jpeg_destination_mgr * dest = cinfo->dest;
-
-  *(dest->next_output_byte)++ = (JOCTET) val;
-  if (--dest->free_in_buffer == 0) {
-    if (! (*dest->empty_output_buffer) (cinfo))
-      ERREXIT(cinfo, JERR_CANT_SUSPEND);
-  }
-}
-
-
-LOCAL(void)
-emit_marker (j_compress_ptr cinfo, JPEG_MARKER mark)
-/* Emit a marker code */
-{
-  emit_byte(cinfo, 0xFF);
-  emit_byte(cinfo, (int) mark);
-}
-
-
-LOCAL(void)
-emit_2bytes (j_compress_ptr cinfo, int value)
-/* Emit a 2-byte integer; these are always MSB first in JPEG files */
-{
-  emit_byte(cinfo, (value >> 8) & 0xFF);
-  emit_byte(cinfo, value & 0xFF);
-}
-
-
-/*
- * Routines to write specific marker types.
- */
-
-LOCAL(int)
-emit_dqt (j_compress_ptr cinfo, int index)
-/* Emit a DQT marker */
-/* Returns the precision used (0 = 8bits, 1 = 16bits) for baseline checking */
-{
-  JQUANT_TBL * qtbl = cinfo->quant_tbl_ptrs[index];
-  int prec;
-  int i;
-
-  if (qtbl == NULL)
-    ERREXIT1(cinfo, JERR_NO_QUANT_TABLE, index);
-
-  prec = 0;
-  for (i = 0; i < DCTSIZE2; i++) {
-    if (qtbl->quantval[i] > 255)
-      prec = 1;
-  }
-
-  if (! qtbl->sent_table) {
-    emit_marker(cinfo, M_DQT);
-
-    emit_2bytes(cinfo, prec ? DCTSIZE2*2 + 1 + 2 : DCTSIZE2 + 1 + 2);
-
-    emit_byte(cinfo, index + (prec<<4));
-
-    for (i = 0; i < DCTSIZE2; i++) {
-      /* The table entries must be emitted in zigzag order. */
-      unsigned int qval = qtbl->quantval[jpeg_natural_order[i]];
-      if (prec)
-	emit_byte(cinfo, (int) (qval >> 8));
-      emit_byte(cinfo, (int) (qval & 0xFF));
-    }
-
-    qtbl->sent_table = TRUE;
-  }
-
-  return prec;
-}
-
-
-LOCAL(void)
-emit_dht (j_compress_ptr cinfo, int index, boolean is_ac)
-/* Emit a DHT marker */
-{
-  JHUFF_TBL * htbl;
-  int length, i;
-  
-  if (is_ac) {
-    htbl = cinfo->ac_huff_tbl_ptrs[index];
-    index += 0x10;		/* output index has AC bit set */
-  } else {
-    htbl = cinfo->dc_huff_tbl_ptrs[index];
-  }
-
-  if (htbl == NULL)
-    ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, index);
-  
-  if (! htbl->sent_table) {
-    emit_marker(cinfo, M_DHT);
-    
-    length = 0;
-    for (i = 1; i <= 16; i++)
-      length += htbl->bits[i];
-    
-    emit_2bytes(cinfo, length + 2 + 1 + 16);
-    emit_byte(cinfo, index);
-    
-    for (i = 1; i <= 16; i++)
-      emit_byte(cinfo, htbl->bits[i]);
-    
-    for (i = 0; i < length; i++)
-      emit_byte(cinfo, htbl->huffval[i]);
-    
-    htbl->sent_table = TRUE;
-  }
-}
-
-
-LOCAL(void)
-emit_dac (j_compress_ptr cinfo)
-/* Emit a DAC marker */
-/* Since the useful info is so small, we want to emit all the tables in */
-/* one DAC marker.  Therefore this routine does its own scan of the table. */
-{
-#ifdef C_ARITH_CODING_SUPPORTED
-  char dc_in_use[NUM_ARITH_TBLS];
-  char ac_in_use[NUM_ARITH_TBLS];
-  int length, i;
-  jpeg_component_info *compptr;
-  
-  for (i = 0; i < NUM_ARITH_TBLS; i++)
-    dc_in_use[i] = ac_in_use[i] = 0;
-  
-  for (i = 0; i < cinfo->comps_in_scan; i++) {
-    compptr = cinfo->cur_comp_info[i];
-    dc_in_use[compptr->dc_tbl_no] = 1;
-    ac_in_use[compptr->ac_tbl_no] = 1;
-  }
-  
-  length = 0;
-  for (i = 0; i < NUM_ARITH_TBLS; i++)
-    length += dc_in_use[i] + ac_in_use[i];
-  
-  emit_marker(cinfo, M_DAC);
-  
-  emit_2bytes(cinfo, length*2 + 2);
-  
-  for (i = 0; i < NUM_ARITH_TBLS; i++) {
-    if (dc_in_use[i]) {
-      emit_byte(cinfo, i);
-      emit_byte(cinfo, cinfo->arith_dc_L[i] + (cinfo->arith_dc_U[i]<<4));
-    }
-    if (ac_in_use[i]) {
-      emit_byte(cinfo, i + 0x10);
-      emit_byte(cinfo, cinfo->arith_ac_K[i]);
-    }
-  }
-#endif /* C_ARITH_CODING_SUPPORTED */
-}
-
-
-LOCAL(void)
-emit_dri (j_compress_ptr cinfo)
-/* Emit a DRI marker */
-{
-  emit_marker(cinfo, M_DRI);
-  
-  emit_2bytes(cinfo, 4);	/* fixed length */
-
-  emit_2bytes(cinfo, (int) cinfo->restart_interval);
-}
-
-
-LOCAL(void)
-emit_sof (j_compress_ptr cinfo, JPEG_MARKER code)
-/* Emit a SOF marker */
-{
-  int ci;
-  jpeg_component_info *compptr;
-  
-  emit_marker(cinfo, code);
-  
-  emit_2bytes(cinfo, 3 * cinfo->num_components + 2 + 5 + 1); /* length */
-
-  /* Make sure image isn't bigger than SOF field can handle */
-  if ((long) cinfo->image_height > 65535L ||
-      (long) cinfo->image_width > 65535L)
-    ERREXIT1(cinfo, JERR_IMAGE_TOO_BIG, (unsigned int) 65535);
-
-  emit_byte(cinfo, cinfo->data_precision);
-  emit_2bytes(cinfo, (int) cinfo->image_height);
-  emit_2bytes(cinfo, (int) cinfo->image_width);
-
-  emit_byte(cinfo, cinfo->num_components);
-
-  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
-       ci++, compptr++) {
-    emit_byte(cinfo, compptr->component_id);
-    emit_byte(cinfo, (compptr->h_samp_factor << 4) + compptr->v_samp_factor);
-    emit_byte(cinfo, compptr->quant_tbl_no);
-  }
-}
-
-
-LOCAL(void)
-emit_sos (j_compress_ptr cinfo)
-/* Emit a SOS marker */
-{
-  int i, td, ta;
-  jpeg_component_info *compptr;
-  
-  emit_marker(cinfo, M_SOS);
-  
-  emit_2bytes(cinfo, 2 * cinfo->comps_in_scan + 2 + 1 + 3); /* length */
-  
-  emit_byte(cinfo, cinfo->comps_in_scan);
-  
-  for (i = 0; i < cinfo->comps_in_scan; i++) {
-    compptr = cinfo->cur_comp_info[i];
-    emit_byte(cinfo, compptr->component_id);
-    td = compptr->dc_tbl_no;
-    ta = compptr->ac_tbl_no;
-    if (cinfo->progressive_mode) {
-      /* Progressive mode: only DC or only AC tables are used in one scan;
-       * furthermore, Huffman coding of DC refinement uses no table at all.
-       * We emit 0 for unused field(s); this is recommended by the P&M text
-       * but does not seem to be specified in the standard.
-       */
-      if (cinfo->Ss == 0) {
-	ta = 0;			/* DC scan */
-	if (cinfo->Ah != 0 && !cinfo->arith_code)
-	  td = 0;		/* no DC table either */
-      } else {
-	td = 0;			/* AC scan */
-      }
-    }
-    emit_byte(cinfo, (td << 4) + ta);
-  }
-
-  emit_byte(cinfo, cinfo->Ss);
-  emit_byte(cinfo, cinfo->Se);
-  emit_byte(cinfo, (cinfo->Ah << 4) + cinfo->Al);
-}
-
-
-LOCAL(void)
-emit_jfif_app0 (j_compress_ptr cinfo)
-/* Emit a JFIF-compliant APP0 marker */
-{
-  /*
-   * Length of APP0 block	(2 bytes)
-   * Block ID			(4 bytes - ASCII "JFIF")
-   * Zero byte			(1 byte to terminate the ID string)
-   * Version Major, Minor	(2 bytes - major first)
-   * Units			(1 byte - 0x00 = none, 0x01 = inch, 0x02 = cm)
-   * Xdpu			(2 bytes - dots per unit horizontal)
-   * Ydpu			(2 bytes - dots per unit vertical)
-   * Thumbnail X size		(1 byte)
-   * Thumbnail Y size		(1 byte)
-   */
-  
-  emit_marker(cinfo, M_APP0);
-  
-  emit_2bytes(cinfo, 2 + 4 + 1 + 2 + 1 + 2 + 2 + 1 + 1); /* length */
-
-  emit_byte(cinfo, 0x4A);	/* Identifier: ASCII "JFIF" */
-  emit_byte(cinfo, 0x46);
-  emit_byte(cinfo, 0x49);
-  emit_byte(cinfo, 0x46);
-  emit_byte(cinfo, 0);
-  emit_byte(cinfo, cinfo->JFIF_major_version); /* Version fields */
-  emit_byte(cinfo, cinfo->JFIF_minor_version);
-  emit_byte(cinfo, cinfo->density_unit); /* Pixel size information */
-  emit_2bytes(cinfo, (int) cinfo->X_density);
-  emit_2bytes(cinfo, (int) cinfo->Y_density);
-  emit_byte(cinfo, 0);		/* No thumbnail image */
-  emit_byte(cinfo, 0);
-}
-
-
-LOCAL(void)
-emit_adobe_app14 (j_compress_ptr cinfo)
-/* Emit an Adobe APP14 marker */
-{
-  /*
-   * Length of APP14 block	(2 bytes)
-   * Block ID			(5 bytes - ASCII "Adobe")
-   * Version Number		(2 bytes - currently 100)
-   * Flags0			(2 bytes - currently 0)
-   * Flags1			(2 bytes - currently 0)
-   * Color transform		(1 byte)
-   *
-   * Although Adobe TN 5116 mentions Version = 101, all the Adobe files
-   * now in circulation seem to use Version = 100, so that's what we write.
-   *
-   * We write the color transform byte as 1 if the JPEG color space is
-   * YCbCr, 2 if it's YCCK, 0 otherwise.  Adobe's definition has to do with
-   * whether the encoder performed a transformation, which is pretty useless.
-   */
-  
-  emit_marker(cinfo, M_APP14);
-  
-  emit_2bytes(cinfo, 2 + 5 + 2 + 2 + 2 + 1); /* length */
-
-  emit_byte(cinfo, 0x41);	/* Identifier: ASCII "Adobe" */
-  emit_byte(cinfo, 0x64);
-  emit_byte(cinfo, 0x6F);
-  emit_byte(cinfo, 0x62);
-  emit_byte(cinfo, 0x65);
-  emit_2bytes(cinfo, 100);	/* Version */
-  emit_2bytes(cinfo, 0);	/* Flags0 */
-  emit_2bytes(cinfo, 0);	/* Flags1 */
-  switch (cinfo->jpeg_color_space) {
-  case JCS_YCbCr:
-    emit_byte(cinfo, 1);	/* Color transform = 1 */
-    break;
-  case JCS_YCCK:
-    emit_byte(cinfo, 2);	/* Color transform = 2 */
-    break;
-  default:
-    emit_byte(cinfo, 0);	/* Color transform = 0 */
-    break;
-  }
-}
-
-
-/*
- * These routines allow writing an arbitrary marker with parameters.
- * The only intended use is to emit COM or APPn markers after calling
- * write_file_header and before calling write_frame_header.
- * Other uses are not guaranteed to produce desirable results.
- * Counting the parameter bytes properly is the caller's responsibility.
- */
-
-METHODDEF(void)
-write_marker_header (j_compress_ptr cinfo, int marker, unsigned int datalen)
-/* Emit an arbitrary marker header */
-{
-  if (datalen > (unsigned int) 65533)		/* safety check */
-    ERREXIT(cinfo, JERR_BAD_LENGTH);
-
-  emit_marker(cinfo, (JPEG_MARKER) marker);
-
-  emit_2bytes(cinfo, (int) (datalen + 2));	/* total length */
-}
-
-METHODDEF(void)
-write_marker_byte (j_compress_ptr cinfo, int val)
-/* Emit one byte of marker parameters following write_marker_header */
-{
-  emit_byte(cinfo, val);
-}
-
-
-/*
- * Write datastream header.
- * This consists of an SOI and optional APPn markers.
- * We recommend use of the JFIF marker, but not the Adobe marker,
- * when using YCbCr or grayscale data.  The JFIF marker should NOT
- * be used for any other JPEG colorspace.  The Adobe marker is helpful
- * to distinguish RGB, CMYK, and YCCK colorspaces.
- * Note that an application can write additional header markers after
- * jpeg_start_compress returns.
- */
-
-METHODDEF(void)
-write_file_header (j_compress_ptr cinfo)
-{
-  my_marker_ptr marker = (my_marker_ptr) cinfo->marker;
-
-  emit_marker(cinfo, M_SOI);	/* first the SOI */
-
-  /* SOI is defined to reset restart interval to 0 */
-  marker->last_restart_interval = 0;
-
-  if (cinfo->write_JFIF_header)	/* next an optional JFIF APP0 */
-    emit_jfif_app0(cinfo);
-  if (cinfo->write_Adobe_marker) /* next an optional Adobe APP14 */
-    emit_adobe_app14(cinfo);
-}
-
-
-/*
- * Write frame header.
- * This consists of DQT and SOFn markers.
- * Note that we do not emit the SOF until we have emitted the DQT(s).
- * This avoids compatibility problems with incorrect implementations that
- * try to error-check the quant table numbers as soon as they see the SOF.
- */
-
-METHODDEF(void)
-write_frame_header (j_compress_ptr cinfo)
-{
-  int ci, prec;
-  boolean is_baseline;
-  jpeg_component_info *compptr;
-  
-  /* Emit DQT for each quantization table.
-   * Note that emit_dqt() suppresses any duplicate tables.
-   */
-  prec = 0;
-  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
-       ci++, compptr++) {
-    prec += emit_dqt(cinfo, compptr->quant_tbl_no);
-  }
-  /* now prec is nonzero iff there are any 16-bit quant tables. */
-
-  /* Check for a non-baseline specification.
-   * Note we assume that Huffman table numbers won't be changed later.
-   */
-  if (cinfo->arith_code || cinfo->progressive_mode ||
-      cinfo->data_precision != 8) {
-    is_baseline = FALSE;
-  } else {
-    is_baseline = TRUE;
-    for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
-	 ci++, compptr++) {
-      if (compptr->dc_tbl_no > 1 || compptr->ac_tbl_no > 1)
-	is_baseline = FALSE;
-    }
-    if (prec && is_baseline) {
-      is_baseline = FALSE;
-      /* If it's baseline except for quantizer size, warn the user */
-      TRACEMS(cinfo, 0, JTRC_16BIT_TABLES);
-    }
-  }
-
-  /* Emit the proper SOF marker */
-  if (cinfo->arith_code) {
-    emit_sof(cinfo, M_SOF9);	/* SOF code for arithmetic coding */
-  } else {
-    if (cinfo->progressive_mode)
-      emit_sof(cinfo, M_SOF2);	/* SOF code for progressive Huffman */
-    else if (is_baseline)
-      emit_sof(cinfo, M_SOF0);	/* SOF code for baseline implementation */
-    else
-      emit_sof(cinfo, M_SOF1);	/* SOF code for non-baseline Huffman file */
-  }
-}
-
-
-/*
- * Write scan header.
- * This consists of DHT or DAC markers, optional DRI, and SOS.
- * Compressed data will be written following the SOS.
- */
-
-METHODDEF(void)
-write_scan_header (j_compress_ptr cinfo)
-{
-  my_marker_ptr marker = (my_marker_ptr) cinfo->marker;
-  int i;
-  jpeg_component_info *compptr;
-
-  if (cinfo->arith_code) {
-    /* Emit arith conditioning info.  We may have some duplication
-     * if the file has multiple scans, but it's so small it's hardly
-     * worth worrying about.
-     */
-    emit_dac(cinfo);
-  } else {
-    /* Emit Huffman tables.
-     * Note that emit_dht() suppresses any duplicate tables.
-     */
-    for (i = 0; i < cinfo->comps_in_scan; i++) {
-      compptr = cinfo->cur_comp_info[i];
-      if (cinfo->progressive_mode) {
-	/* Progressive mode: only DC or only AC tables are used in one scan */
-	if (cinfo->Ss == 0) {
-	  if (cinfo->Ah == 0)	/* DC needs no table for refinement scan */
-	    emit_dht(cinfo, compptr->dc_tbl_no, FALSE);
-	} else {
-	  emit_dht(cinfo, compptr->ac_tbl_no, TRUE);
-	}
-      } else {
-	/* Sequential mode: need both DC and AC tables */
-	emit_dht(cinfo, compptr->dc_tbl_no, FALSE);
-	emit_dht(cinfo, compptr->ac_tbl_no, TRUE);
-      }
-    }
-  }
-
-  /* Emit DRI if required --- note that DRI value could change for each scan.
-   * We avoid wasting space with unnecessary DRIs, however.
-   */
-  if (cinfo->restart_interval != marker->last_restart_interval) {
-    emit_dri(cinfo);
-    marker->last_restart_interval = cinfo->restart_interval;
-  }
-
-  emit_sos(cinfo);
-}
-
-
-/*
- * Write datastream trailer.
- */
-
-METHODDEF(void)
-write_file_trailer (j_compress_ptr cinfo)
-{
-  emit_marker(cinfo, M_EOI);
-}
-
-
-/*
- * Write an abbreviated table-specification datastream.
- * This consists of SOI, DQT and DHT tables, and EOI.
- * Any table that is defined and not marked sent_table = TRUE will be
- * emitted.  Note that all tables will be marked sent_table = TRUE at exit.
- */
-
-METHODDEF(void)
-write_tables_only (j_compress_ptr cinfo)
-{
-  int i;
-
-  emit_marker(cinfo, M_SOI);
-
-  for (i = 0; i < NUM_QUANT_TBLS; i++) {
-    if (cinfo->quant_tbl_ptrs[i] != NULL)
-      (void) emit_dqt(cinfo, i);
-  }
-
-  if (! cinfo->arith_code) {
-    for (i = 0; i < NUM_HUFF_TBLS; i++) {
-      if (cinfo->dc_huff_tbl_ptrs[i] != NULL)
-	emit_dht(cinfo, i, FALSE);
-      if (cinfo->ac_huff_tbl_ptrs[i] != NULL)
-	emit_dht(cinfo, i, TRUE);
-    }
-  }
-
-  emit_marker(cinfo, M_EOI);
-}
-
-
-/*
- * Initialize the marker writer module.
- */
-
-GLOBAL(void)
-jinit_marker_writer (j_compress_ptr cinfo)
-{
-  my_marker_ptr marker;
-
-  /* Create the subobject */
-  marker = (my_marker_ptr)
-    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				SIZEOF(my_marker_writer));
-  cinfo->marker = (struct jpeg_marker_writer *) marker;
-  /* Initialize method pointers */
-  marker->pub.write_file_header = write_file_header;
-  marker->pub.write_frame_header = write_frame_header;
-  marker->pub.write_scan_header = write_scan_header;
-  marker->pub.write_file_trailer = write_file_trailer;
-  marker->pub.write_tables_only = write_tables_only;
-  marker->pub.write_marker_header = write_marker_header;
-  marker->pub.write_marker_byte = write_marker_byte;
-  /* Initialize private state */
-  marker->last_restart_interval = 0;
-}

Engine/lib/ljpeg/jcmaster.c

@@ -1,590 +0,0 @@
-/*
- * jcmaster.c
- *
- * Copyright (C) 1991-1997, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains master control logic for the JPEG compressor.
- * These routines are concerned with parameter validation, initial setup,
- * and inter-pass control (determining the number of passes and the work 
- * to be done in each pass).
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-
-
-/* Private state */
-
-typedef enum {
-	main_pass,		/* input data, also do first output step */
-	huff_opt_pass,		/* Huffman code optimization pass */
-	output_pass		/* data output pass */
-} c_pass_type;
-
-typedef struct {
-  struct jpeg_comp_master pub;	/* public fields */
-
-  c_pass_type pass_type;	/* the type of the current pass */
-
-  int pass_number;		/* # of passes completed */
-  int total_passes;		/* total # of passes needed */
-
-  int scan_number;		/* current index in scan_info[] */
-} my_comp_master;
-
-typedef my_comp_master * my_master_ptr;
-
-
-/*
- * Support routines that do various essential calculations.
- */
-
-LOCAL(void)
-initial_setup (j_compress_ptr cinfo)
-/* Do computations that are needed before master selection phase */
-{
-  int ci;
-  jpeg_component_info *compptr;
-  long samplesperrow;
-  JDIMENSION jd_samplesperrow;
-
-  /* Sanity check on image dimensions */
-  if (cinfo->image_height <= 0 || cinfo->image_width <= 0
-      || cinfo->num_components <= 0 || cinfo->input_components <= 0)
-    ERREXIT(cinfo, JERR_EMPTY_IMAGE);
-
-  /* Make sure image isn't bigger than I can handle */
-  if ((long) cinfo->image_height > (long) JPEG_MAX_DIMENSION ||
-      (long) cinfo->image_width > (long) JPEG_MAX_DIMENSION)
-    ERREXIT1(cinfo, JERR_IMAGE_TOO_BIG, (unsigned int) JPEG_MAX_DIMENSION);
-
-  /* Width of an input scanline must be representable as JDIMENSION. */
-  samplesperrow = (long) cinfo->image_width * (long) cinfo->input_components;
-  jd_samplesperrow = (JDIMENSION) samplesperrow;
-  if ((long) jd_samplesperrow != samplesperrow)
-    ERREXIT(cinfo, JERR_WIDTH_OVERFLOW);
-
-  /* For now, precision must match compiled-in value... */
-  if (cinfo->data_precision != BITS_IN_JSAMPLE)
-    ERREXIT1(cinfo, JERR_BAD_PRECISION, cinfo->data_precision);
-
-  /* Check that number of components won't exceed internal array sizes */
-  if (cinfo->num_components > MAX_COMPONENTS)
-    ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->num_components,
-	     MAX_COMPONENTS);
-
-  /* Compute maximum sampling factors; check factor validity */
-  cinfo->max_h_samp_factor = 1;
-  cinfo->max_v_samp_factor = 1;
-  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
-       ci++, compptr++) {
-    if (compptr->h_samp_factor<=0 || compptr->h_samp_factor>MAX_SAMP_FACTOR ||
-	compptr->v_samp_factor<=0 || compptr->v_samp_factor>MAX_SAMP_FACTOR)
-      ERREXIT(cinfo, JERR_BAD_SAMPLING);
-    cinfo->max_h_samp_factor = MAX(cinfo->max_h_samp_factor,
-				   compptr->h_samp_factor);
-    cinfo->max_v_samp_factor = MAX(cinfo->max_v_samp_factor,
-				   compptr->v_samp_factor);
-  }
-
-  /* Compute dimensions of components */
-  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
-       ci++, compptr++) {
-    /* Fill in the correct component_index value; don't rely on application */
-    compptr->component_index = ci;
-    /* For compression, we never do DCT scaling. */
-    compptr->DCT_scaled_size = DCTSIZE;
-    /* Size in DCT blocks */
-    compptr->width_in_blocks = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_width * (long) compptr->h_samp_factor,
-		    (long) (cinfo->max_h_samp_factor * DCTSIZE));
-    compptr->height_in_blocks = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_height * (long) compptr->v_samp_factor,
-		    (long) (cinfo->max_v_samp_factor * DCTSIZE));
-    /* Size in samples */
-    compptr->downsampled_width = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_width * (long) compptr->h_samp_factor,
-		    (long) cinfo->max_h_samp_factor);
-    compptr->downsampled_height = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_height * (long) compptr->v_samp_factor,
-		    (long) cinfo->max_v_samp_factor);
-    /* Mark component needed (this flag isn't actually used for compression) */
-    compptr->component_needed = TRUE;
-  }
-
-  /* Compute number of fully interleaved MCU rows (number of times that
-   * main controller will call coefficient controller).
-   */
-  cinfo->total_iMCU_rows = (JDIMENSION)
-    jdiv_round_up((long) cinfo->image_height,
-		  (long) (cinfo->max_v_samp_factor*DCTSIZE));
-}
-
-
-#ifdef C_MULTISCAN_FILES_SUPPORTED
-
-LOCAL(void)
-validate_script (j_compress_ptr cinfo)
-/* Verify that the scan script in cinfo->scan_info[] is valid; also
- * determine whether it uses progressive JPEG, and set cinfo->progressive_mode.
- */
-{
-  const jpeg_scan_info * scanptr;
-  int scanno, ncomps, ci, coefi, thisi;
-  int Ss, Se, Ah, Al;
-  boolean component_sent[MAX_COMPONENTS];
-#ifdef C_PROGRESSIVE_SUPPORTED
-  int * last_bitpos_ptr;
-  int last_bitpos[MAX_COMPONENTS][DCTSIZE2];
-  /* -1 until that coefficient has been seen; then last Al for it */
-#endif
-
-  if (cinfo->num_scans <= 0)
-    ERREXIT1(cinfo, JERR_BAD_SCAN_SCRIPT, 0);
-
-  /* For sequential JPEG, all scans must have Ss=0, Se=DCTSIZE2-1;
-   * for progressive JPEG, no scan can have this.
-   */
-  scanptr = cinfo->scan_info;
-  if (scanptr->Ss != 0 || scanptr->Se != DCTSIZE2-1) {
-#ifdef C_PROGRESSIVE_SUPPORTED
-    cinfo->progressive_mode = TRUE;
-    last_bitpos_ptr = & last_bitpos[0][0];
-    for (ci = 0; ci < cinfo->num_components; ci++) 
-      for (coefi = 0; coefi < DCTSIZE2; coefi++)
-	*last_bitpos_ptr++ = -1;
-#else
-    ERREXIT(cinfo, JERR_NOT_COMPILED);
-#endif
-  } else {
-    cinfo->progressive_mode = FALSE;
-    for (ci = 0; ci < cinfo->num_components; ci++) 
-      component_sent[ci] = FALSE;
-  }
-
-  for (scanno = 1; scanno <= cinfo->num_scans; scanptr++, scanno++) {
-    /* Validate component indexes */
-    ncomps = scanptr->comps_in_scan;
-    if (ncomps <= 0 || ncomps > MAX_COMPS_IN_SCAN)
-      ERREXIT2(cinfo, JERR_COMPONENT_COUNT, ncomps, MAX_COMPS_IN_SCAN);
-    for (ci = 0; ci < ncomps; ci++) {
-      thisi = scanptr->component_index[ci];
-      if (thisi < 0 || thisi >= cinfo->num_components)
-	ERREXIT1(cinfo, JERR_BAD_SCAN_SCRIPT, scanno);
-      /* Components must appear in SOF order within each scan */
-      if (ci > 0 && thisi <= scanptr->component_index[ci-1])
-	ERREXIT1(cinfo, JERR_BAD_SCAN_SCRIPT, scanno);
-    }
-    /* Validate progression parameters */
-    Ss = scanptr->Ss;
-    Se = scanptr->Se;
-    Ah = scanptr->Ah;
-    Al = scanptr->Al;
-    if (cinfo->progressive_mode) {
-#ifdef C_PROGRESSIVE_SUPPORTED
-      /* The JPEG spec simply gives the ranges 0..13 for Ah and Al, but that
-       * seems wrong: the upper bound ought to depend on data precision.
-       * Perhaps they really meant 0..N+1 for N-bit precision.
-       * Here we allow 0..10 for 8-bit data; Al larger than 10 results in
-       * out-of-range reconstructed DC values during the first DC scan,
-       * which might cause problems for some decoders.
-       */
-#if BITS_IN_JSAMPLE == 8
-#define MAX_AH_AL 10
-#else
-#define MAX_AH_AL 13
-#endif
-      if (Ss < 0 || Ss >= DCTSIZE2 || Se < Ss || Se >= DCTSIZE2 ||
-	  Ah < 0 || Ah > MAX_AH_AL || Al < 0 || Al > MAX_AH_AL)
-	ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno);
-      if (Ss == 0) {
-	if (Se != 0)		/* DC and AC together not OK */
-	  ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno);
-      } else {
-	if (ncomps != 1)	/* AC scans must be for only one component */
-	  ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno);
-      }
-      for (ci = 0; ci < ncomps; ci++) {
-	last_bitpos_ptr = & last_bitpos[scanptr->component_index[ci]][0];
-	if (Ss != 0 && last_bitpos_ptr[0] < 0) /* AC without prior DC scan */
-	  ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno);
-	for (coefi = Ss; coefi <= Se; coefi++) {
-	  if (last_bitpos_ptr[coefi] < 0) {
-	    /* first scan of this coefficient */
-	    if (Ah != 0)
-	      ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno);
-	  } else {
-	    /* not first scan */
-	    if (Ah != last_bitpos_ptr[coefi] || Al != Ah-1)
-	      ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno);
-	  }
-	  last_bitpos_ptr[coefi] = Al;
-	}
-      }
-#endif
-    } else {
-      /* For sequential JPEG, all progression parameters must be these: */
-      if (Ss != 0 || Se != DCTSIZE2-1 || Ah != 0 || Al != 0)
-	ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno);
-      /* Make sure components are not sent twice */
-      for (ci = 0; ci < ncomps; ci++) {
-	thisi = scanptr->component_index[ci];
-	if (component_sent[thisi])
-	  ERREXIT1(cinfo, JERR_BAD_SCAN_SCRIPT, scanno);
-	component_sent[thisi] = TRUE;
-      }
-    }
-  }
-
-  /* Now verify that everything got sent. */
-  if (cinfo->progressive_mode) {
-#ifdef C_PROGRESSIVE_SUPPORTED
-    /* For progressive mode, we only check that at least some DC data
-     * got sent for each component; the spec does not require that all bits
-     * of all coefficients be transmitted.  Would it be wiser to enforce
-     * transmission of all coefficient bits??
-     */
-    for (ci = 0; ci < cinfo->num_components; ci++) {
-      if (last_bitpos[ci][0] < 0)
-	ERREXIT(cinfo, JERR_MISSING_DATA);
-    }
-#endif
-  } else {
-    for (ci = 0; ci < cinfo->num_components; ci++) {
-      if (! component_sent[ci])
-	ERREXIT(cinfo, JERR_MISSING_DATA);
-    }
-  }
-}
-
-#endif /* C_MULTISCAN_FILES_SUPPORTED */
-
-
-LOCAL(void)
-select_scan_parameters (j_compress_ptr cinfo)
-/* Set up the scan parameters for the current scan */
-{
-  int ci;
-
-#ifdef C_MULTISCAN_FILES_SUPPORTED
-  if (cinfo->scan_info != NULL) {
-    /* Prepare for current scan --- the script is already validated */
-    my_master_ptr master = (my_master_ptr) cinfo->master;
-    const jpeg_scan_info * scanptr = cinfo->scan_info + master->scan_number;
-
-    cinfo->comps_in_scan = scanptr->comps_in_scan;
-    for (ci = 0; ci < scanptr->comps_in_scan; ci++) {
-      cinfo->cur_comp_info[ci] =
-	&cinfo->comp_info[scanptr->component_index[ci]];
-    }
-    cinfo->Ss = scanptr->Ss;
-    cinfo->Se = scanptr->Se;
-    cinfo->Ah = scanptr->Ah;
-    cinfo->Al = scanptr->Al;
-  }
-  else
-#endif
-  {
-    /* Prepare for single sequential-JPEG scan containing all components */
-    if (cinfo->num_components > MAX_COMPS_IN_SCAN)
-      ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->num_components,
-	       MAX_COMPS_IN_SCAN);
-    cinfo->comps_in_scan = cinfo->num_components;
-    for (ci = 0; ci < cinfo->num_components; ci++) {
-      cinfo->cur_comp_info[ci] = &cinfo->comp_info[ci];
-    }
-    cinfo->Ss = 0;
-    cinfo->Se = DCTSIZE2-1;
-    cinfo->Ah = 0;
-    cinfo->Al = 0;
-  }
-}
-
-
-LOCAL(void)
-per_scan_setup (j_compress_ptr cinfo)
-/* Do computations that are needed before processing a JPEG scan */
-/* cinfo->comps_in_scan and cinfo->cur_comp_info[] are already set */
-{
-  int ci, mcublks, tmp;
-  jpeg_component_info *compptr;
-  
-  if (cinfo->comps_in_scan == 1) {
-    
-    /* Noninterleaved (single-component) scan */
-    compptr = cinfo->cur_comp_info[0];
-    
-    /* Overall image size in MCUs */
-    cinfo->MCUs_per_row = compptr->width_in_blocks;
-    cinfo->MCU_rows_in_scan = compptr->height_in_blocks;
-    
-    /* For noninterleaved scan, always one block per MCU */
-    compptr->MCU_width = 1;
-    compptr->MCU_height = 1;
-    compptr->MCU_blocks = 1;
-    compptr->MCU_sample_width = DCTSIZE;
-    compptr->last_col_width = 1;
-    /* For noninterleaved scans, it is convenient to define last_row_height
-     * as the number of block rows present in the last iMCU row.
-     */
-    tmp = (int) (compptr->height_in_blocks % compptr->v_samp_factor);
-    if (tmp == 0) tmp = compptr->v_samp_factor;
-    compptr->last_row_height = tmp;
-    
-    /* Prepare array describing MCU composition */
-    cinfo->blocks_in_MCU = 1;
-    cinfo->MCU_membership[0] = 0;
-    
-  } else {
-    
-    /* Interleaved (multi-component) scan */
-    if (cinfo->comps_in_scan <= 0 || cinfo->comps_in_scan > MAX_COMPS_IN_SCAN)
-      ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->comps_in_scan,
-	       MAX_COMPS_IN_SCAN);
-    
-    /* Overall image size in MCUs */
-    cinfo->MCUs_per_row = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_width,
-		    (long) (cinfo->max_h_samp_factor*DCTSIZE));
-    cinfo->MCU_rows_in_scan = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_height,
-		    (long) (cinfo->max_v_samp_factor*DCTSIZE));
-    
-    cinfo->blocks_in_MCU = 0;
-    
-    for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
-      compptr = cinfo->cur_comp_info[ci];
-      /* Sampling factors give # of blocks of component in each MCU */
-      compptr->MCU_width = compptr->h_samp_factor;
-      compptr->MCU_height = compptr->v_samp_factor;
-      compptr->MCU_blocks = compptr->MCU_width * compptr->MCU_height;
-      compptr->MCU_sample_width = compptr->MCU_width * DCTSIZE;
-      /* Figure number of non-dummy blocks in last MCU column & row */
-      tmp = (int) (compptr->width_in_blocks % compptr->MCU_width);
-      if (tmp == 0) tmp = compptr->MCU_width;
-      compptr->last_col_width = tmp;
-      tmp = (int) (compptr->height_in_blocks % compptr->MCU_height);
-      if (tmp == 0) tmp = compptr->MCU_height;
-      compptr->last_row_height = tmp;
-      /* Prepare array describing MCU composition */
-      mcublks = compptr->MCU_blocks;
-      if (cinfo->blocks_in_MCU + mcublks > C_MAX_BLOCKS_IN_MCU)
-	ERREXIT(cinfo, JERR_BAD_MCU_SIZE);
-      while (mcublks-- > 0) {
-	cinfo->MCU_membership[cinfo->blocks_in_MCU++] = ci;
-      }
-    }
-    
-  }
-
-  /* Convert restart specified in rows to actual MCU count. */
-  /* Note that count must fit in 16 bits, so we provide limiting. */
-  if (cinfo->restart_in_rows > 0) {
-    long nominal = (long) cinfo->restart_in_rows * (long) cinfo->MCUs_per_row;
-    cinfo->restart_interval = (unsigned int) MIN(nominal, 65535L);
-  }
-}
-
-
-/*
- * Per-pass setup.
- * This is called at the beginning of each pass.  We determine which modules
- * will be active during this pass and give them appropriate start_pass calls.
- * We also set is_last_pass to indicate whether any more passes will be
- * required.
- */
-
-METHODDEF(void)
-prepare_for_pass (j_compress_ptr cinfo)
-{
-  my_master_ptr master = (my_master_ptr) cinfo->master;
-
-  switch (master->pass_type) {
-  case main_pass:
-    /* Initial pass: will collect input data, and do either Huffman
-     * optimization or data output for the first scan.
-     */
-    select_scan_parameters(cinfo);
-    per_scan_setup(cinfo);
-    if (! cinfo->raw_data_in) {
-      (*cinfo->cconvert->start_pass) (cinfo);
-      (*cinfo->downsample->start_pass) (cinfo);
-      (*cinfo->prep->start_pass) (cinfo, JBUF_PASS_THRU);
-    }
-    (*cinfo->fdct->start_pass) (cinfo);
-    (*cinfo->entropy->start_pass) (cinfo, cinfo->optimize_coding);
-    (*cinfo->coef->start_pass) (cinfo,
-				(master->total_passes > 1 ?
-				 JBUF_SAVE_AND_PASS : JBUF_PASS_THRU));
-    (*cinfo->main->start_pass) (cinfo, JBUF_PASS_THRU);
-    if (cinfo->optimize_coding) {
-      /* No immediate data output; postpone writing frame/scan headers */
-      master->pub.call_pass_startup = FALSE;
-    } else {
-      /* Will write frame/scan headers at first jpeg_write_scanlines call */
-      master->pub.call_pass_startup = TRUE;
-    }
-    break;
-#ifdef ENTROPY_OPT_SUPPORTED
-  case huff_opt_pass:
-    /* Do Huffman optimization for a scan after the first one. */
-    select_scan_parameters(cinfo);
-    per_scan_setup(cinfo);
-    if (cinfo->Ss != 0 || cinfo->Ah == 0 || cinfo->arith_code) {
-      (*cinfo->entropy->start_pass) (cinfo, TRUE);
-      (*cinfo->coef->start_pass) (cinfo, JBUF_CRANK_DEST);
-      master->pub.call_pass_startup = FALSE;
-      break;
-    }
-    /* Special case: Huffman DC refinement scans need no Huffman table
-     * and therefore we can skip the optimization pass for them.
-     */
-    master->pass_type = output_pass;
-    master->pass_number++;
-    /*FALLTHROUGH*/
-#endif
-  case output_pass:
-    /* Do a data-output pass. */
-    /* We need not repeat per-scan setup if prior optimization pass did it. */
-    if (! cinfo->optimize_coding) {
-      select_scan_parameters(cinfo);
-      per_scan_setup(cinfo);
-    }
-    (*cinfo->entropy->start_pass) (cinfo, FALSE);
-    (*cinfo->coef->start_pass) (cinfo, JBUF_CRANK_DEST);
-    /* We emit frame/scan headers now */
-    if (master->scan_number == 0)
-      (*cinfo->marker->write_frame_header) (cinfo);
-    (*cinfo->marker->write_scan_header) (cinfo);
-    master->pub.call_pass_startup = FALSE;
-    break;
-  default:
-    ERREXIT(cinfo, JERR_NOT_COMPILED);
-  }
-
-  master->pub.is_last_pass = (master->pass_number == master->total_passes-1);
-
-  /* Set up progress monitor's pass info if present */
-  if (cinfo->progress != NULL) {
-    cinfo->progress->completed_passes = master->pass_number;
-    cinfo->progress->total_passes = master->total_passes;
-  }
-}
-
-
-/*
- * Special start-of-pass hook.
- * This is called by jpeg_write_scanlines if call_pass_startup is TRUE.
- * In single-pass processing, we need this hook because we don't want to
- * write frame/scan headers during jpeg_start_compress; we want to let the
- * application write COM markers etc. between jpeg_start_compress and the
- * jpeg_write_scanlines loop.
- * In multi-pass processing, this routine is not used.
- */
-
-METHODDEF(void)
-pass_startup (j_compress_ptr cinfo)
-{
-  cinfo->master->call_pass_startup = FALSE; /* reset flag so call only once */
-
-  (*cinfo->marker->write_frame_header) (cinfo);
-  (*cinfo->marker->write_scan_header) (cinfo);
-}
-
-
-/*
- * Finish up at end of pass.
- */
-
-METHODDEF(void)
-finish_pass_master (j_compress_ptr cinfo)
-{
-  my_master_ptr master = (my_master_ptr) cinfo->master;
-
-  /* The entropy coder always needs an end-of-pass call,
-   * either to analyze statistics or to flush its output buffer.
-   */
-  (*cinfo->entropy->finish_pass) (cinfo);
-
-  /* Update state for next pass */
-  switch (master->pass_type) {
-  case main_pass:
-    /* next pass is either output of scan 0 (after optimization)
-     * or output of scan 1 (if no optimization).
-     */
-    master->pass_type = output_pass;
-    if (! cinfo->optimize_coding)
-      master->scan_number++;
-    break;
-  case huff_opt_pass:
-    /* next pass is always output of current scan */
-    master->pass_type = output_pass;
-    break;
-  case output_pass:
-    /* next pass is either optimization or output of next scan */
-    if (cinfo->optimize_coding)
-      master->pass_type = huff_opt_pass;
-    master->scan_number++;
-    break;
-  }
-
-  master->pass_number++;
-}
-
-
-/*
- * Initialize master compression control.
- */
-
-GLOBAL(void)
-jinit_c_master_control (j_compress_ptr cinfo, boolean transcode_only)
-{
-  my_master_ptr master;
-
-  master = (my_master_ptr)
-      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				  SIZEOF(my_comp_master));
-  cinfo->master = (struct jpeg_comp_master *) master;
-  master->pub.prepare_for_pass = prepare_for_pass;
-  master->pub.pass_startup = pass_startup;
-  master->pub.finish_pass = finish_pass_master;
-  master->pub.is_last_pass = FALSE;
-
-  /* Validate parameters, determine derived values */
-  initial_setup(cinfo);
-
-  if (cinfo->scan_info != NULL) {
-#ifdef C_MULTISCAN_FILES_SUPPORTED
-    validate_script(cinfo);
-#else
-    ERREXIT(cinfo, JERR_NOT_COMPILED);
-#endif
-  } else {
-    cinfo->progressive_mode = FALSE;
-    cinfo->num_scans = 1;
-  }
-
-  if (cinfo->progressive_mode)	/*  TEMPORARY HACK ??? */
-    cinfo->optimize_coding = TRUE; /* assume default tables no good for progressive mode */
-
-  /* Initialize my private state */
-  if (transcode_only) {
-    /* no main pass in transcoding */
-    if (cinfo->optimize_coding)
-      master->pass_type = huff_opt_pass;
-    else
-      master->pass_type = output_pass;
-  } else {
-    /* for normal compression, first pass is always this type: */
-    master->pass_type = main_pass;
-  }
-  master->scan_number = 0;
-  master->pass_number = 0;
-  if (cinfo->optimize_coding)
-    master->total_passes = cinfo->num_scans * 2;
-  else
-    master->total_passes = cinfo->num_scans;
-}

Engine/lib/ljpeg/jcomapi.c

@@ -1,106 +0,0 @@
-/*
- * jcomapi.c
- *
- * Copyright (C) 1994-1997, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains application interface routines that are used for both
- * compression and decompression.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-
-
-/*
- * Abort processing of a JPEG compression or decompression operation,
- * but don't destroy the object itself.
- *
- * For this, we merely clean up all the nonpermanent memory pools.
- * Note that temp files (virtual arrays) are not allowed to belong to
- * the permanent pool, so we will be able to close all temp files here.
- * Closing a data source or destination, if necessary, is the application's
- * responsibility.
- */
-
-GLOBAL(void)
-jpeg_abort (j_common_ptr cinfo)
-{
-  int pool;
-
-  /* Do nothing if called on a not-initialized or destroyed JPEG object. */
-  if (cinfo->mem == NULL)
-    return;
-
-  /* Releasing pools in reverse order might help avoid fragmentation
-   * with some (brain-damaged) malloc libraries.
-   */
-  for (pool = JPOOL_NUMPOOLS-1; pool > JPOOL_PERMANENT; pool--) {
-    (*cinfo->mem->free_pool) (cinfo, pool);
-  }
-
-  /* Reset overall state for possible reuse of object */
-  if (cinfo->is_decompressor) {
-    cinfo->global_state = DSTATE_START;
-    /* Try to keep application from accessing now-deleted marker list.
-     * A bit kludgy to do it here, but this is the most central place.
-     */
-    ((j_decompress_ptr) cinfo)->marker_list = NULL;
-  } else {
-    cinfo->global_state = CSTATE_START;
-  }
-}
-
-
-/*
- * Destruction of a JPEG object.
- *
- * Everything gets deallocated except the master jpeg_compress_struct itself
- * and the error manager struct.  Both of these are supplied by the application
- * and must be freed, if necessary, by the application.  (Often they are on
- * the stack and so don't need to be freed anyway.)
- * Closing a data source or destination, if necessary, is the application's
- * responsibility.
- */
-
-GLOBAL(void)
-jpeg_destroy (j_common_ptr cinfo)
-{
-  /* We need only tell the memory manager to release everything. */
-  /* NB: mem pointer is NULL if memory mgr failed to initialize. */
-  if (cinfo->mem != NULL)
-    (*cinfo->mem->self_destruct) (cinfo);
-  cinfo->mem = NULL;		/* be safe if jpeg_destroy is called twice */
-  cinfo->global_state = 0;	/* mark it destroyed */
-}
-
-
-/*
- * Convenience routines for allocating quantization and Huffman tables.
- * (Would jutils.c be a more reasonable place to put these?)
- */
-
-GLOBAL(JQUANT_TBL *)
-jpeg_alloc_quant_table (j_common_ptr cinfo)
-{
-  JQUANT_TBL *tbl;
-
-  tbl = (JQUANT_TBL *)
-    (*cinfo->mem->alloc_small) (cinfo, JPOOL_PERMANENT, SIZEOF(JQUANT_TBL));
-  tbl->sent_table = FALSE;	/* make sure this is false in any new table */
-  return tbl;
-}
-
-
-GLOBAL(JHUFF_TBL *)
-jpeg_alloc_huff_table (j_common_ptr cinfo)
-{
-  JHUFF_TBL *tbl;
-
-  tbl = (JHUFF_TBL *)
-    (*cinfo->mem->alloc_small) (cinfo, JPOOL_PERMANENT, SIZEOF(JHUFF_TBL));
-  tbl->sent_table = FALSE;	/* make sure this is false in any new table */
-  return tbl;
-}

Engine/lib/ljpeg/jconfig.cw.mac.h

@@ -1,160 +0,0 @@
-/*
- * jconfig.doc
- *
- * Copyright (C) 1991-1994, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file documents the configuration options that are required to
- * customize the JPEG software for a particular system.
- *
- * The actual configuration options for a particular installation are stored
- * in jconfig.h.  On many machines, jconfig.h can be generated automatically
- * or copied from one of the "canned" jconfig files that we supply.  But if
- * you need to generate a jconfig.h file by hand, this file tells you how.
- *
- */
-
-// disable the unused arument warning
-#pragma warn_unusedarg off
-
-#define jpeg_size_t unsigned long
-
-// apparently, if we use the Mac memmgr instead of ansi or something, we need to define this here.
-#undef USE_MAC_MEMMGR
-
-/*
- * These symbols indicate the properties of your machine or compiler.
- * #define the symbol if yes, #undef it if no.
- */
-
-/* Does your compiler support function prototypes?
- * (If not, you also need to use ansi2knr, see install.doc)
- */
-#define HAVE_PROTOTYPES
-
-/* Does your compiler support the declaration "unsigned char" ?
- * How about "unsigned short" ?
- */
-#define HAVE_UNSIGNED_CHAR
-#define HAVE_UNSIGNED_SHORT
-
-/* Define "void" as "char" if your compiler doesn't know about type void.
- * NOTE: be sure to define void such that "void *" represents the most general
- * pointer type, e.g., that returned by malloc().
- */
-/* #define void char */
-
-/* Define "const" as empty if your compiler doesn't know the "const" keyword.
- */
-/* #define const */
-
-/* Define this if an ordinary "char" type is unsigned.
- * If you're not sure, leaving it undefined will work at some cost in speed.
- * If you defined HAVE_UNSIGNED_CHAR then the speed difference is minimal.
- */
-#undef CHAR_IS_UNSIGNED
-
-/* Define this if your system has an ANSI-conforming <stddef.h> file.
- */
-#define HAVE_STDDEF_H
-
-/* Define this if your system has an ANSI-conforming <stdlib.h> file.
- */
-#define HAVE_STDLIB_H
-
-/* Define this if your system does not have an ANSI/SysV <string.h>,
- * but does have a BSD-style <strings.h>.
- */
-#undef NEED_BSD_STRINGS
-
-/* Define this if your system does not provide typedef size_t in any of the
- * ANSI-standard places (stddef.h, stdlib.h, or stdio.h), but places it in
- * <sys/types.h> instead.
- */
-#undef NEED_SYS_TYPES_H
-
-/* For 80x86 machines, you need to define NEED_FAR_POINTERS,
- * unless you are using a large-data memory model or 80386 flat-memory mode.
- * On less brain-damaged CPUs this symbol must not be defined.
- * (Defining this symbol causes large data structures to be referenced through
- * "far" pointers and to be allocated with a special version of malloc.)
- */
-#undef NEED_FAR_POINTERS
-
-/* Define this if your linker needs global names to be unique in less
- * than the first 15 characters.
- */
-#undef NEED_SHORT_EXTERNAL_NAMES
-
-/* Although a real ANSI C compiler can deal perfectly well with pointers to
- * unspecified structures (see "incomplete types" in the spec), a few pre-ANSI
- * and pseudo-ANSI compilers get confused.  To keep one of these bozos happy,
- * define INCOMPLETE_TYPES_BROKEN.  This is not recommended unless you
- * actually get "missing structure definition" warnings or errors while
- * compiling the JPEG code.
- */
-#undef INCOMPLETE_TYPES_BROKEN
-
-
-/*
- * The following options affect code selection within the JPEG library,
- * but they don't need to be visible to applications using the library.
- * To minimize application namespace pollution, the symbols won't be
- * defined unless JPEG_INTERNALS has been defined.
- */
-
-#ifdef JPEG_INTERNALS
-
-/* Define this if your compiler implements ">>" on signed values as a logical
- * (unsigned) shift; leave it undefined if ">>" is a signed (arithmetic) shift,
- * which is the normal and rational definition.
- */
-#undef RIGHT_SHIFT_IS_UNSIGNED
-
-
-#endif /* JPEG_INTERNALS */
-
-
-/*
- * The remaining options do not affect the JPEG library proper,
- * but only the sample applications cjpeg/djpeg (see cjpeg.c, djpeg.c).
- * Other applications can ignore these.
- */
-
-#ifdef JPEG_CJPEG_DJPEG
-
-/* These defines indicate which image (non-JPEG) file formats are allowed. */
-
-#undef BMP_SUPPORTED		/* BMP image file format */
-#undef GIF_SUPPORTED		/* GIF image file format */
-#undef PPM_SUPPORTED		/* PBMPLUS PPM/PGM image file format */
-#undef RLE_SUPPORTED		/* Utah RLE image file format */
-#undef TARGA_SUPPORTED		/* Targa image file format */
-
-/* Define this if you want to name both input and output files on the command
- * line, rather than using stdout and optionally stdin.  You MUST do this if
- * your system can't cope with binary I/O to stdin/stdout.  See comments at
- * head of cjpeg.c or djpeg.c.
- */
-#undef TWO_FILE_COMMANDLINE
-
-/* Define this if your system needs explicit cleanup of temporary files.
- * This is crucial under MS-DOS, where the temporary "files" may be areas
- * of extended memory; on most other systems it's not as important.
- */
-#undef NEED_SIGNAL_CATCHER
-
-/* By default, we open image files with fopen(...,"rb") or fopen(...,"wb").
- * This is necessary on systems that distinguish text files from binary files,
- * and is harmless on most systems that don't.  If you have one of the rare
- * systems that complains about the "b" spec, define this symbol.
- */
-#undef DONT_USE_B_MODE
-
-/* Define this if you want percent-done progress reports from cjpeg/djpeg.
- */
-#undef PROGRESS_REPORT
-
-
-#endif /* JPEG_CJPEG_DJPEG */

Engine/lib/ljpeg/jconfig.cw.win.h

@@ -1,157 +0,0 @@
-/*
- * jconfig.doc
- *
- * Copyright (C) 1991-1994, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file documents the configuration options that are required to
- * customize the JPEG software for a particular system.
- *
- * The actual configuration options for a particular installation are stored
- * in jconfig.h.  On many machines, jconfig.h can be generated automatically
- * or copied from one of the "canned" jconfig files that we supply.  But if
- * you need to generate a jconfig.h file by hand, this file tells you how.
- *
- */
-
-// disable the unused arument warning
-#pragma warn_unusedarg off
-
-#define jpeg_size_t unsigned long
-
-/*
- * These symbols indicate the properties of your machine or compiler.
- * #define the symbol if yes, #undef it if no.
- */
-
-/* Does your compiler support function prototypes?
- * (If not, you also need to use ansi2knr, see install.doc)
- */
-#define HAVE_PROTOTYPES
-
-/* Does your compiler support the declaration "unsigned char" ?
- * How about "unsigned short" ?
- */
-#define HAVE_UNSIGNED_CHAR
-#define HAVE_UNSIGNED_SHORT
-
-/* Define "void" as "char" if your compiler doesn't know about type void.
- * NOTE: be sure to define void such that "void *" represents the most general
- * pointer type, e.g., that returned by malloc().
- */
-/* #define void char */
-
-/* Define "const" as empty if your compiler doesn't know the "const" keyword.
- */
-/* #define const */
-
-/* Define this if an ordinary "char" type is unsigned.
- * If you're not sure, leaving it undefined will work at some cost in speed.
- * If you defined HAVE_UNSIGNED_CHAR then the speed difference is minimal.
- */
-#undef CHAR_IS_UNSIGNED
-
-/* Define this if your system has an ANSI-conforming <stddef.h> file.
- */
-#define HAVE_STDDEF_H
-
-/* Define this if your system has an ANSI-conforming <stdlib.h> file.
- */
-#define HAVE_STDLIB_H
-
-/* Define this if your system does not have an ANSI/SysV <string.h>,
- * but does have a BSD-style <strings.h>.
- */
-#undef NEED_BSD_STRINGS
-
-/* Define this if your system does not provide typedef size_t in any of the
- * ANSI-standard places (stddef.h, stdlib.h, or stdio.h), but places it in
- * <sys/types.h> instead.
- */
-#undef NEED_SYS_TYPES_H
-
-/* For 80x86 machines, you need to define NEED_FAR_POINTERS,
- * unless you are using a large-data memory model or 80386 flat-memory mode.
- * On less brain-damaged CPUs this symbol must not be defined.
- * (Defining this symbol causes large data structures to be referenced through
- * "far" pointers and to be allocated with a special version of malloc.)
- */
-#undef NEED_FAR_POINTERS
-
-/* Define this if your linker needs global names to be unique in less
- * than the first 15 characters.
- */
-#undef NEED_SHORT_EXTERNAL_NAMES
-
-/* Although a real ANSI C compiler can deal perfectly well with pointers to
- * unspecified structures (see "incomplete types" in the spec), a few pre-ANSI
- * and pseudo-ANSI compilers get confused.  To keep one of these bozos happy,
- * define INCOMPLETE_TYPES_BROKEN.  This is not recommended unless you
- * actually get "missing structure definition" warnings or errors while
- * compiling the JPEG code.
- */
-#undef INCOMPLETE_TYPES_BROKEN
-
-
-/*
- * The following options affect code selection within the JPEG library,
- * but they don't need to be visible to applications using the library.
- * To minimize application namespace pollution, the symbols won't be
- * defined unless JPEG_INTERNALS has been defined.
- */
-
-#ifdef JPEG_INTERNALS
-
-/* Define this if your compiler implements ">>" on signed values as a logical
- * (unsigned) shift; leave it undefined if ">>" is a signed (arithmetic) shift,
- * which is the normal and rational definition.
- */
-#undef RIGHT_SHIFT_IS_UNSIGNED
-
-
-#endif /* JPEG_INTERNALS */
-
-
-/*
- * The remaining options do not affect the JPEG library proper,
- * but only the sample applications cjpeg/djpeg (see cjpeg.c, djpeg.c).
- * Other applications can ignore these.
- */
-
-#ifdef JPEG_CJPEG_DJPEG
-
-/* These defines indicate which image (non-JPEG) file formats are allowed. */
-
-#undef BMP_SUPPORTED		/* BMP image file format */
-#undef GIF_SUPPORTED		/* GIF image file format */
-#undef PPM_SUPPORTED		/* PBMPLUS PPM/PGM image file format */
-#undef RLE_SUPPORTED		/* Utah RLE image file format */
-#undef TARGA_SUPPORTED		/* Targa image file format */
-
-/* Define this if you want to name both input and output files on the command
- * line, rather than using stdout and optionally stdin.  You MUST do this if
- * your system can't cope with binary I/O to stdin/stdout.  See comments at
- * head of cjpeg.c or djpeg.c.
- */
-#undef TWO_FILE_COMMANDLINE
-
-/* Define this if your system needs explicit cleanup of temporary files.
- * This is crucial under MS-DOS, where the temporary "files" may be areas
- * of extended memory; on most other systems it's not as important.
- */
-#undef NEED_SIGNAL_CATCHER
-
-/* By default, we open image files with fopen(...,"rb") or fopen(...,"wb").
- * This is necessary on systems that distinguish text files from binary files,
- * and is harmless on most systems that don't.  If you have one of the rare
- * systems that complains about the "b" spec, define this symbol.
- */
-#undef DONT_USE_B_MODE
-
-/* Define this if you want percent-done progress reports from cjpeg/djpeg.
- */
-#undef PROGRESS_REPORT
-
-
-#endif /* JPEG_CJPEG_DJPEG */

Engine/lib/ljpeg/jconfig.gcc.linux.h

@@ -1,101 +0,0 @@
-#ifndef __JCONFIG_GCC_LINUX_H
-#define __JCONFIG_GCC_LINUX_H
-
-#include <stdlib.h>
-
-#define jpeg_size_t size_t
-
-/*
- * These symbols indicate the properties of your machine or compiler.
- * #define the symbol if yes, #undef it if no.
- */
-
-/* Does your compiler support function prototypes?
- * (If not, you also need to use ansi2knr, see install.doc)
- */
-#define HAVE_PROTOTYPES
-
-/* Does your compiler support the declaration "unsigned char" ?
- * How about "unsigned short" ?
- */
-#define HAVE_UNSIGNED_CHAR
-#define HAVE_UNSIGNED_SHORT
-
-/* Define "void" as "char" if your compiler doesn't know about type void.
- * NOTE: be sure to define void such that "void *" represents the most general
- * pointer type, e.g., that returned by malloc().
- */
-/* #define void char */
-
-/* Define "const" as empty if your compiler doesn't know the "const" keyword.
- */
-/* #define const */
-
-/* Define this if an ordinary "char" type is unsigned.
- * If you're not sure, leaving it undefined will work at some cost in speed.
- * If you defined HAVE_UNSIGNED_CHAR then the speed difference is minimal.
- */
-#undef CHAR_IS_UNSIGNED
-
-/* Define this if your system has an ANSI-conforming <stddef.h> file.
- */
-#define HAVE_STDDEF_H
-
-/* Define this if your system has an ANSI-conforming <stdlib.h> file.
- */
-#define HAVE_STDLIB_H
-
-/* Define this if your system does not have an ANSI/SysV <string.h>,
- * but does have a BSD-style <strings.h>.
- */
-#undef NEED_BSD_STRINGS
-
-/* Define this if your system does not provide typedef size_t in any of the
- * ANSI-standard places (stddef.h, stdlib.h, or stdio.h), but places it in
- * <sys/types.h> instead.
- */
-#undef NEED_SYS_TYPES_H
-
-/* For 80x86 machines, you need to define NEED_FAR_POINTERS,
- * unless you are using a large-data memory model or 80386 flat-memory mode.
- * On less brain-damaged CPUs this symbol must not be defined.
- * (Defining this symbol causes large data structures to be referenced through
- * "far" pointers and to be allocated with a special version of malloc.)
- */
-#undef NEED_FAR_POINTERS
-
-/* Define this if your linker needs global names to be unique in less
- * than the first 15 characters.
- */
-#undef NEED_SHORT_EXTERNAL_NAMES
-
-/* Although a real ANSI C compiler can deal perfectly well with pointers to
- * unspecified structures (see "incomplete types" in the spec), a few pre-ANSI
- * and pseudo-ANSI compilers get confused.  To keep one of these bozos happy,
- * define INCOMPLETE_TYPES_BROKEN.  This is not recommended unless you
- * actually get "missing structure definition" warnings or errors while
- * compiling the JPEG code.
- */
-#undef INCOMPLETE_TYPES_BROKEN
-
-
-/*
- * The following options affect code selection within the JPEG library,
- * but they don't need to be visible to applications using the library.
- * To minimize application namespace pollution, the symbols won't be
- * defined unless JPEG_INTERNALS has been defined.
- */
-
-#ifdef JPEG_INTERNALS
-
-/* Define this if your compiler implements ">>" on signed values as a logical
- * (unsigned) shift; leave it undefined if ">>" is a signed (arithmetic) shift,
- * which is the normal and rational definition.
- */
-#undef RIGHT_SHIFT_IS_UNSIGNED
-
-
-#endif /* JPEG_INTERNALS */
-
-
-#endif

Engine/lib/ljpeg/jconfig.h

@@ -1,39 +0,0 @@
-//--------------------------------------------------------------------------
-// 
-// 
-// 
-//--------------------------------------------------------------------------
-
-
-#ifndef _H_JCONFIG_
-#define _H_JCONFIG_
-
-
-#if (defined(__MWERKS__) && !defined(macintosh))
-   #include "jconfig.cw.win.h"
-   #define JCONFIG_INCLUDED
-#endif
-
-#if (defined(__MWERKS__) && defined(macintosh)) || defined(__APPLE__)
-   #include "jconfig.cw.mac.h"
-   #define JCONFIG_INCLUDED
-#endif
-
-#if (defined(_MSC_VER) && !defined(__MWERKS__) && !defined(macintosh))
-   #include "jconfig.vc.win.h"
-   #define JCONFIG_INCLUDED
-#endif
-
-#if (( __GNUC__ >= 2 ) && (defined (__CYGWIN32__) || defined (__linux__) || defined(__OpenBSD__) || defined(__FreeBSD__) || defined(__WIN32__) || defined(SN_TARGET_PS3)) )
-   #include "jconfig.gcc.linux.h"
-   #define JCONFIG_INCLUDED
-#endif
-
-
-#ifndef JCONFIG_INCLUDED
-#error No jconfig.h file was included!
-#endif
-
-#undef JCONFIG_INCLUDED
-
-#endif  // _H_JCONFIG_

Engine/lib/ljpeg/jconfig.vc.win.h

@@ -1,154 +0,0 @@
-/*
- * jconfig.doc
- *
- * Copyright (C) 1991-1994, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file documents the configuration options that are required to
- * customize the JPEG software for a particular system.
- *
- * The actual configuration options for a particular installation are stored
- * in jconfig.h.  On many machines, jconfig.h can be generated automatically
- * or copied from one of the "canned" jconfig files that we supply.  But if
- * you need to generate a jconfig.h file by hand, this file tells you how.
- *
- */
-
-#define jpeg_size_t unsigned long
-
-/*
- * These symbols indicate the properties of your machine or compiler.
- * #define the symbol if yes, #undef it if no.
- */
-
-/* Does your compiler support function prototypes?
- * (If not, you also need to use ansi2knr, see install.doc)
- */
-#define HAVE_PROTOTYPES
-
-/* Does your compiler support the declaration "unsigned char" ?
- * How about "unsigned short" ?
- */
-#define HAVE_UNSIGNED_CHAR
-#define HAVE_UNSIGNED_SHORT
-
-/* Define "void" as "char" if your compiler doesn't know about type void.
- * NOTE: be sure to define void such that "void *" represents the most general
- * pointer type, e.g., that returned by malloc().
- */
-/* #define void char */
-
-/* Define "const" as empty if your compiler doesn't know the "const" keyword.
- */
-/* #define const */
-
-/* Define this if an ordinary "char" type is unsigned.
- * If you're not sure, leaving it undefined will work at some cost in speed.
- * If you defined HAVE_UNSIGNED_CHAR then the speed difference is minimal.
- */
-#undef CHAR_IS_UNSIGNED
-
-/* Define this if your system has an ANSI-conforming <stddef.h> file.
- */
-#define HAVE_STDDEF_H
-
-/* Define this if your system has an ANSI-conforming <stdlib.h> file.
- */
-#define HAVE_STDLIB_H
-
-/* Define this if your system does not have an ANSI/SysV <string.h>,
- * but does have a BSD-style <strings.h>.
- */
-#undef NEED_BSD_STRINGS
-
-/* Define this if your system does not provide typedef size_t in any of the
- * ANSI-standard places (stddef.h, stdlib.h, or stdio.h), but places it in
- * <sys/types.h> instead.
- */
-#undef NEED_SYS_TYPES_H
-
-/* For 80x86 machines, you need to define NEED_FAR_POINTERS,
- * unless you are using a large-data memory model or 80386 flat-memory mode.
- * On less brain-damaged CPUs this symbol must not be defined.
- * (Defining this symbol causes large data structures to be referenced through
- * "far" pointers and to be allocated with a special version of malloc.)
- */
-#undef NEED_FAR_POINTERS
-
-/* Define this if your linker needs global names to be unique in less
- * than the first 15 characters.
- */
-#undef NEED_SHORT_EXTERNAL_NAMES
-
-/* Although a real ANSI C compiler can deal perfectly well with pointers to
- * unspecified structures (see "incomplete types" in the spec), a few pre-ANSI
- * and pseudo-ANSI compilers get confused.  To keep one of these bozos happy,
- * define INCOMPLETE_TYPES_BROKEN.  This is not recommended unless you
- * actually get "missing structure definition" warnings or errors while
- * compiling the JPEG code.
- */
-#undef INCOMPLETE_TYPES_BROKEN
-
-
-/*
- * The following options affect code selection within the JPEG library,
- * but they don't need to be visible to applications using the library.
- * To minimize application namespace pollution, the symbols won't be
- * defined unless JPEG_INTERNALS has been defined.
- */
-
-#ifdef JPEG_INTERNALS
-
-/* Define this if your compiler implements ">>" on signed values as a logical
- * (unsigned) shift; leave it undefined if ">>" is a signed (arithmetic) shift,
- * which is the normal and rational definition.
- */
-#undef RIGHT_SHIFT_IS_UNSIGNED
-
-
-#endif /* JPEG_INTERNALS */
-
-
-/*
- * The remaining options do not affect the JPEG library proper,
- * but only the sample applications cjpeg/djpeg (see cjpeg.c, djpeg.c).
- * Other applications can ignore these.
- */
-
-#ifdef JPEG_CJPEG_DJPEG
-
-/* These defines indicate which image (non-JPEG) file formats are allowed. */
-
-#undef BMP_SUPPORTED		/* BMP image file format */
-#undef GIF_SUPPORTED		/* GIF image file format */
-#undef PPM_SUPPORTED		/* PBMPLUS PPM/PGM image file format */
-#undef RLE_SUPPORTED		/* Utah RLE image file format */
-#undef TARGA_SUPPORTED		/* Targa image file format */
-
-/* Define this if you want to name both input and output files on the command
- * line, rather than using stdout and optionally stdin.  You MUST do this if
- * your system can't cope with binary I/O to stdin/stdout.  See comments at
- * head of cjpeg.c or djpeg.c.
- */
-#undef TWO_FILE_COMMANDLINE
-
-/* Define this if your system needs explicit cleanup of temporary files.
- * This is crucial under MS-DOS, where the temporary "files" may be areas
- * of extended memory; on most other systems it's not as important.
- */
-#undef NEED_SIGNAL_CATCHER
-
-/* By default, we open image files with fopen(...,"rb") or fopen(...,"wb").
- * This is necessary on systems that distinguish text files from binary files,
- * and is harmless on most systems that don't.  If you have one of the rare
- * systems that complains about the "b" spec, define this symbol.
- */
-#undef DONT_USE_B_MODE
-
-/* Define this if you want percent-done progress reports from cjpeg/djpeg.
- */
-#undef PROGRESS_REPORT
-
-
-#endif /* JPEG_CJPEG_DJPEG */

Engine/lib/ljpeg/jcparam.c

@@ -1,610 +0,0 @@
-/*
- * jcparam.c
- *
- * Copyright (C) 1991-1998, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains optional default-setting code for the JPEG compressor.
- * Applications do not have to use this file, but those that don't use it
- * must know a lot more about the innards of the JPEG code.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-
-
-/*
- * Quantization table setup routines
- */
-
-GLOBAL(void)
-jpeg_add_quant_table (j_compress_ptr cinfo, int which_tbl,
-		      const unsigned int *basic_table,
-		      int scale_factor, boolean force_baseline)
-/* Define a quantization table equal to the basic_table times
- * a scale factor (given as a percentage).
- * If force_baseline is TRUE, the computed quantization table entries
- * are limited to 1..255 for JPEG baseline compatibility.
- */
-{
-  JQUANT_TBL ** qtblptr;
-  int i;
-  long temp;
-
-  /* Safety check to ensure start_compress not called yet. */
-  if (cinfo->global_state != CSTATE_START)
-    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
-
-  if (which_tbl < 0 || which_tbl >= NUM_QUANT_TBLS)
-    ERREXIT1(cinfo, JERR_DQT_INDEX, which_tbl);
-
-  qtblptr = & cinfo->quant_tbl_ptrs[which_tbl];
-
-  if (*qtblptr == NULL)
-    *qtblptr = jpeg_alloc_quant_table((j_common_ptr) cinfo);
-
-  for (i = 0; i < DCTSIZE2; i++) {
-    temp = ((long) basic_table[i] * scale_factor + 50L) / 100L;
-    /* limit the values to the valid range */
-    if (temp <= 0L) temp = 1L;
-    if (temp > 32767L) temp = 32767L; /* max quantizer needed for 12 bits */
-    if (force_baseline && temp > 255L)
-      temp = 255L;		/* limit to baseline range if requested */
-    (*qtblptr)->quantval[i] = (UINT16) temp;
-  }
-
-  /* Initialize sent_table FALSE so table will be written to JPEG file. */
-  (*qtblptr)->sent_table = FALSE;
-}
-
-
-GLOBAL(void)
-jpeg_set_linear_quality (j_compress_ptr cinfo, int scale_factor,
-			 boolean force_baseline)
-/* Set or change the 'quality' (quantization) setting, using default tables
- * and a straight percentage-scaling quality scale.  In most cases it's better
- * to use jpeg_set_quality (below); this entry point is provided for
- * applications that insist on a linear percentage scaling.
- */
-{
-  /* These are the sample quantization tables given in JPEG spec section K.1.
-   * The spec says that the values given produce "good" quality, and
-   * when divided by 2, "very good" quality.
-   */
-  static const unsigned int std_luminance_quant_tbl[DCTSIZE2] = {
-    16,  11,  10,  16,  24,  40,  51,  61,
-    12,  12,  14,  19,  26,  58,  60,  55,
-    14,  13,  16,  24,  40,  57,  69,  56,
-    14,  17,  22,  29,  51,  87,  80,  62,
-    18,  22,  37,  56,  68, 109, 103,  77,
-    24,  35,  55,  64,  81, 104, 113,  92,
-    49,  64,  78,  87, 103, 121, 120, 101,
-    72,  92,  95,  98, 112, 100, 103,  99
-  };
-  static const unsigned int std_chrominance_quant_tbl[DCTSIZE2] = {
-    17,  18,  24,  47,  99,  99,  99,  99,
-    18,  21,  26,  66,  99,  99,  99,  99,
-    24,  26,  56,  99,  99,  99,  99,  99,
-    47,  66,  99,  99,  99,  99,  99,  99,
-    99,  99,  99,  99,  99,  99,  99,  99,
-    99,  99,  99,  99,  99,  99,  99,  99,
-    99,  99,  99,  99,  99,  99,  99,  99,
-    99,  99,  99,  99,  99,  99,  99,  99
-  };
-
-  /* Set up two quantization tables using the specified scaling */
-  jpeg_add_quant_table(cinfo, 0, std_luminance_quant_tbl,
-		       scale_factor, force_baseline);
-  jpeg_add_quant_table(cinfo, 1, std_chrominance_quant_tbl,
-		       scale_factor, force_baseline);
-}
-
-
-GLOBAL(int)
-jpeg_quality_scaling (int quality)
-/* Convert a user-specified quality rating to a percentage scaling factor
- * for an underlying quantization table, using our recommended scaling curve.
- * The input 'quality' factor should be 0 (terrible) to 100 (very good).
- */
-{
-  /* Safety limit on quality factor.  Convert 0 to 1 to avoid zero divide. */
-  if (quality <= 0) quality = 1;
-  if (quality > 100) quality = 100;
-
-  /* The basic table is used as-is (scaling 100) for a quality of 50.
-   * Qualities 50..100 are converted to scaling percentage 200 - 2*Q;
-   * note that at Q=100 the scaling is 0, which will cause jpeg_add_quant_table
-   * to make all the table entries 1 (hence, minimum quantization loss).
-   * Qualities 1..50 are converted to scaling percentage 5000/Q.
-   */
-  if (quality < 50)
-    quality = 5000 / quality;
-  else
-    quality = 200 - quality*2;
-
-  return quality;
-}
-
-
-GLOBAL(void)
-jpeg_set_quality (j_compress_ptr cinfo, int quality, boolean force_baseline)
-/* Set or change the 'quality' (quantization) setting, using default tables.
- * This is the standard quality-adjusting entry point for typical user
- * interfaces; only those who want detailed control over quantization tables
- * would use the preceding three routines directly.
- */
-{
-  /* Convert user 0-100 rating to percentage scaling */
-  quality = jpeg_quality_scaling(quality);
-
-  /* Set up standard quality tables */
-  jpeg_set_linear_quality(cinfo, quality, force_baseline);
-}
-
-
-/*
- * Huffman table setup routines
- */
-
-LOCAL(void)
-add_huff_table (j_compress_ptr cinfo,
-		JHUFF_TBL **htblptr, const UINT8 *bits, const UINT8 *val)
-/* Define a Huffman table */
-{
-  int nsymbols, len;
-
-  if (*htblptr == NULL)
-    *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo);
-
-  /* Copy the number-of-symbols-of-each-code-length counts */
-  MEMCOPY((*htblptr)->bits, bits, SIZEOF((*htblptr)->bits));
-
-  /* Validate the counts.  We do this here mainly so we can copy the right
-   * number of symbols from the val[] array, without risking marching off
-   * the end of memory.  jchuff.c will do a more thorough test later.
-   */
-  nsymbols = 0;
-  for (len = 1; len <= 16; len++)
-    nsymbols += bits[len];
-  if (nsymbols < 1 || nsymbols > 256)
-    ERREXIT(cinfo, JERR_BAD_HUFF_TABLE);
-
-  MEMCOPY((*htblptr)->huffval, val, nsymbols * SIZEOF(UINT8));
-
-  /* Initialize sent_table FALSE so table will be written to JPEG file. */
-  (*htblptr)->sent_table = FALSE;
-}
-
-
-LOCAL(void)
-std_huff_tables (j_compress_ptr cinfo)
-/* Set up the standard Huffman tables (cf. JPEG standard section K.3) */
-/* IMPORTANT: these are only valid for 8-bit data precision! */
-{
-  static const UINT8 bits_dc_luminance[17] =
-    { /* 0-base */ 0, 0, 1, 5, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0 };
-  static const UINT8 val_dc_luminance[] =
-    { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 };
-  
-  static const UINT8 bits_dc_chrominance[17] =
-    { /* 0-base */ 0, 0, 3, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0 };
-  static const UINT8 val_dc_chrominance[] =
-    { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 };
-  
-  static const UINT8 bits_ac_luminance[17] =
-    { /* 0-base */ 0, 0, 2, 1, 3, 3, 2, 4, 3, 5, 5, 4, 4, 0, 0, 1, 0x7d };
-  static const UINT8 val_ac_luminance[] =
-    { 0x01, 0x02, 0x03, 0x00, 0x04, 0x11, 0x05, 0x12,
-      0x21, 0x31, 0x41, 0x06, 0x13, 0x51, 0x61, 0x07,
-      0x22, 0x71, 0x14, 0x32, 0x81, 0x91, 0xa1, 0x08,
-      0x23, 0x42, 0xb1, 0xc1, 0x15, 0x52, 0xd1, 0xf0,
-      0x24, 0x33, 0x62, 0x72, 0x82, 0x09, 0x0a, 0x16,
-      0x17, 0x18, 0x19, 0x1a, 0x25, 0x26, 0x27, 0x28,
-      0x29, 0x2a, 0x34, 0x35, 0x36, 0x37, 0x38, 0x39,
-      0x3a, 0x43, 0x44, 0x45, 0x46, 0x47, 0x48, 0x49,
-      0x4a, 0x53, 0x54, 0x55, 0x56, 0x57, 0x58, 0x59,
-      0x5a, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, 0x69,
-      0x6a, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, 0x79,
-      0x7a, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89,
-      0x8a, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, 0x98,
-      0x99, 0x9a, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7,
-      0xa8, 0xa9, 0xaa, 0xb2, 0xb3, 0xb4, 0xb5, 0xb6,
-      0xb7, 0xb8, 0xb9, 0xba, 0xc2, 0xc3, 0xc4, 0xc5,
-      0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xd2, 0xd3, 0xd4,
-      0xd5, 0xd6, 0xd7, 0xd8, 0xd9, 0xda, 0xe1, 0xe2,
-      0xe3, 0xe4, 0xe5, 0xe6, 0xe7, 0xe8, 0xe9, 0xea,
-      0xf1, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7, 0xf8,
-      0xf9, 0xfa };
-  
-  static const UINT8 bits_ac_chrominance[17] =
-    { /* 0-base */ 0, 0, 2, 1, 2, 4, 4, 3, 4, 7, 5, 4, 4, 0, 1, 2, 0x77 };
-  static const UINT8 val_ac_chrominance[] =
-    { 0x00, 0x01, 0x02, 0x03, 0x11, 0x04, 0x05, 0x21,
-      0x31, 0x06, 0x12, 0x41, 0x51, 0x07, 0x61, 0x71,
-      0x13, 0x22, 0x32, 0x81, 0x08, 0x14, 0x42, 0x91,
-      0xa1, 0xb1, 0xc1, 0x09, 0x23, 0x33, 0x52, 0xf0,
-      0x15, 0x62, 0x72, 0xd1, 0x0a, 0x16, 0x24, 0x34,
-      0xe1, 0x25, 0xf1, 0x17, 0x18, 0x19, 0x1a, 0x26,
-      0x27, 0x28, 0x29, 0x2a, 0x35, 0x36, 0x37, 0x38,
-      0x39, 0x3a, 0x43, 0x44, 0x45, 0x46, 0x47, 0x48,
-      0x49, 0x4a, 0x53, 0x54, 0x55, 0x56, 0x57, 0x58,
-      0x59, 0x5a, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68,
-      0x69, 0x6a, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78,
-      0x79, 0x7a, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
-      0x88, 0x89, 0x8a, 0x92, 0x93, 0x94, 0x95, 0x96,
-      0x97, 0x98, 0x99, 0x9a, 0xa2, 0xa3, 0xa4, 0xa5,
-      0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xb2, 0xb3, 0xb4,
-      0xb5, 0xb6, 0xb7, 0xb8, 0xb9, 0xba, 0xc2, 0xc3,
-      0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xd2,
-      0xd3, 0xd4, 0xd5, 0xd6, 0xd7, 0xd8, 0xd9, 0xda,
-      0xe2, 0xe3, 0xe4, 0xe5, 0xe6, 0xe7, 0xe8, 0xe9,
-      0xea, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7, 0xf8,
-      0xf9, 0xfa };
-  
-  add_huff_table(cinfo, &cinfo->dc_huff_tbl_ptrs[0],
-		 bits_dc_luminance, val_dc_luminance);
-  add_huff_table(cinfo, &cinfo->ac_huff_tbl_ptrs[0],
-		 bits_ac_luminance, val_ac_luminance);
-  add_huff_table(cinfo, &cinfo->dc_huff_tbl_ptrs[1],
-		 bits_dc_chrominance, val_dc_chrominance);
-  add_huff_table(cinfo, &cinfo->ac_huff_tbl_ptrs[1],
-		 bits_ac_chrominance, val_ac_chrominance);
-}
-
-
-/*
- * Default parameter setup for compression.
- *
- * Applications that don't choose to use this routine must do their
- * own setup of all these parameters.  Alternately, you can call this
- * to establish defaults and then alter parameters selectively.  This
- * is the recommended approach since, if we add any new parameters,
- * your code will still work (they'll be set to reasonable defaults).
- */
-
-GLOBAL(void)
-jpeg_set_defaults (j_compress_ptr cinfo)
-{
-  int i;
-
-  /* Safety check to ensure start_compress not called yet. */
-  if (cinfo->global_state != CSTATE_START)
-    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
-
-  /* Allocate comp_info array large enough for maximum component count.
-   * Array is made permanent in case application wants to compress
-   * multiple images at same param settings.
-   */
-  if (cinfo->comp_info == NULL)
-    cinfo->comp_info = (jpeg_component_info *)
-      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT,
-				  MAX_COMPONENTS * SIZEOF(jpeg_component_info));
-
-  /* Initialize everything not dependent on the color space */
-
-  cinfo->data_precision = BITS_IN_JSAMPLE;
-  /* Set up two quantization tables using default quality of 75 */
-  jpeg_set_quality(cinfo, 75, TRUE);
-  /* Set up two Huffman tables */
-  std_huff_tables(cinfo);
-
-  /* Initialize default arithmetic coding conditioning */
-  for (i = 0; i < NUM_ARITH_TBLS; i++) {
-    cinfo->arith_dc_L[i] = 0;
-    cinfo->arith_dc_U[i] = 1;
-    cinfo->arith_ac_K[i] = 5;
-  }
-
-  /* Default is no multiple-scan output */
-  cinfo->scan_info = NULL;
-  cinfo->num_scans = 0;
-
-  /* Expect normal source image, not raw downsampled data */
-  cinfo->raw_data_in = FALSE;
-
-  /* Use Huffman coding, not arithmetic coding, by default */
-  cinfo->arith_code = FALSE;
-
-  /* By default, don't do extra passes to optimize entropy coding */
-  cinfo->optimize_coding = FALSE;
-  /* The standard Huffman tables are only valid for 8-bit data precision.
-   * If the precision is higher, force optimization on so that usable
-   * tables will be computed.  This test can be removed if default tables
-   * are supplied that are valid for the desired precision.
-   */
-  if (cinfo->data_precision > 8)
-    cinfo->optimize_coding = TRUE;
-
-  /* By default, use the simpler non-cosited sampling alignment */
-  cinfo->CCIR601_sampling = FALSE;
-
-  /* No input smoothing */
-  cinfo->smoothing_factor = 0;
-
-  /* DCT algorithm preference */
-  cinfo->dct_method = JDCT_DEFAULT;
-
-  /* No restart markers */
-  cinfo->restart_interval = 0;
-  cinfo->restart_in_rows = 0;
-
-  /* Fill in default JFIF marker parameters.  Note that whether the marker
-   * will actually be written is determined by jpeg_set_colorspace.
-   *
-   * By default, the library emits JFIF version code 1.01.
-   * An application that wants to emit JFIF 1.02 extension markers should set
-   * JFIF_minor_version to 2.  We could probably get away with just defaulting
-   * to 1.02, but there may still be some decoders in use that will complain
-   * about that; saying 1.01 should minimize compatibility problems.
-   */
-  cinfo->JFIF_major_version = 1; /* Default JFIF version = 1.01 */
-  cinfo->JFIF_minor_version = 1;
-  cinfo->density_unit = 0;	/* Pixel size is unknown by default */
-  cinfo->X_density = 1;		/* Pixel aspect ratio is square by default */
-  cinfo->Y_density = 1;
-
-  /* Choose JPEG colorspace based on input space, set defaults accordingly */
-
-  jpeg_default_colorspace(cinfo);
-}
-
-
-/*
- * Select an appropriate JPEG colorspace for in_color_space.
- */
-
-GLOBAL(void)
-jpeg_default_colorspace (j_compress_ptr cinfo)
-{
-  switch (cinfo->in_color_space) {
-  case JCS_GRAYSCALE:
-    jpeg_set_colorspace(cinfo, JCS_GRAYSCALE);
-    break;
-  case JCS_RGB:
-    jpeg_set_colorspace(cinfo, JCS_YCbCr);
-    break;
-  case JCS_YCbCr:
-    jpeg_set_colorspace(cinfo, JCS_YCbCr);
-    break;
-  case JCS_CMYK:
-    jpeg_set_colorspace(cinfo, JCS_CMYK); /* By default, no translation */
-    break;
-  case JCS_YCCK:
-    jpeg_set_colorspace(cinfo, JCS_YCCK);
-    break;
-  case JCS_UNKNOWN:
-    jpeg_set_colorspace(cinfo, JCS_UNKNOWN);
-    break;
-  default:
-    ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE);
-  }
-}
-
-
-/*
- * Set the JPEG colorspace, and choose colorspace-dependent default values.
- */
-
-GLOBAL(void)
-jpeg_set_colorspace (j_compress_ptr cinfo, J_COLOR_SPACE colorspace)
-{
-  jpeg_component_info * compptr;
-  int ci;
-
-#define SET_COMP(index,id,hsamp,vsamp,quant,dctbl,actbl)  \
-  (compptr = &cinfo->comp_info[index], \
-   compptr->component_id = (id), \
-   compptr->h_samp_factor = (hsamp), \
-   compptr->v_samp_factor = (vsamp), \
-   compptr->quant_tbl_no = (quant), \
-   compptr->dc_tbl_no = (dctbl), \
-   compptr->ac_tbl_no = (actbl) )
-
-  /* Safety check to ensure start_compress not called yet. */
-  if (cinfo->global_state != CSTATE_START)
-    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
-
-  /* For all colorspaces, we use Q and Huff tables 0 for luminance components,
-   * tables 1 for chrominance components.
-   */
-
-  cinfo->jpeg_color_space = colorspace;
-
-  cinfo->write_JFIF_header = FALSE; /* No marker for non-JFIF colorspaces */
-  cinfo->write_Adobe_marker = FALSE; /* write no Adobe marker by default */
-
-  switch (colorspace) {
-  case JCS_GRAYSCALE:
-    cinfo->write_JFIF_header = TRUE; /* Write a JFIF marker */
-    cinfo->num_components = 1;
-    /* JFIF specifies component ID 1 */
-    SET_COMP(0, 1, 1,1, 0, 0,0);
-    break;
-  case JCS_RGB:
-    cinfo->write_Adobe_marker = TRUE; /* write Adobe marker to flag RGB */
-    cinfo->num_components = 3;
-    SET_COMP(0, 0x52 /* 'R' */, 1,1, 0, 0,0);
-    SET_COMP(1, 0x47 /* 'G' */, 1,1, 0, 0,0);
-    SET_COMP(2, 0x42 /* 'B' */, 1,1, 0, 0,0);
-    break;
-  case JCS_YCbCr:
-    cinfo->write_JFIF_header = TRUE; /* Write a JFIF marker */
-    cinfo->num_components = 3;
-    /* JFIF specifies component IDs 1,2,3 */
-    /* We default to 2x2 subsamples of chrominance */
-    SET_COMP(0, 1, 2,2, 0, 0,0);
-    SET_COMP(1, 2, 1,1, 1, 1,1);
-    SET_COMP(2, 3, 1,1, 1, 1,1);
-    break;
-  case JCS_CMYK:
-    cinfo->write_Adobe_marker = TRUE; /* write Adobe marker to flag CMYK */
-    cinfo->num_components = 4;
-    SET_COMP(0, 0x43 /* 'C' */, 1,1, 0, 0,0);
-    SET_COMP(1, 0x4D /* 'M' */, 1,1, 0, 0,0);
-    SET_COMP(2, 0x59 /* 'Y' */, 1,1, 0, 0,0);
-    SET_COMP(3, 0x4B /* 'K' */, 1,1, 0, 0,0);
-    break;
-  case JCS_YCCK:
-    cinfo->write_Adobe_marker = TRUE; /* write Adobe marker to flag YCCK */
-    cinfo->num_components = 4;
-    SET_COMP(0, 1, 2,2, 0, 0,0);
-    SET_COMP(1, 2, 1,1, 1, 1,1);
-    SET_COMP(2, 3, 1,1, 1, 1,1);
-    SET_COMP(3, 4, 2,2, 0, 0,0);
-    break;
-  case JCS_UNKNOWN:
-    cinfo->num_components = cinfo->input_components;
-    if (cinfo->num_components < 1 || cinfo->num_components > MAX_COMPONENTS)
-      ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->num_components,
-	       MAX_COMPONENTS);
-    for (ci = 0; ci < cinfo->num_components; ci++) {
-      SET_COMP(ci, ci, 1,1, 0, 0,0);
-    }
-    break;
-  default:
-    ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
-  }
-}
-
-
-#ifdef C_PROGRESSIVE_SUPPORTED
-
-LOCAL(jpeg_scan_info *)
-fill_a_scan (jpeg_scan_info * scanptr, int ci,
-	     int Ss, int Se, int Ah, int Al)
-/* Support routine: generate one scan for specified component */
-{
-  scanptr->comps_in_scan = 1;
-  scanptr->component_index[0] = ci;
-  scanptr->Ss = Ss;
-  scanptr->Se = Se;
-  scanptr->Ah = Ah;
-  scanptr->Al = Al;
-  scanptr++;
-  return scanptr;
-}
-
-LOCAL(jpeg_scan_info *)
-fill_scans (jpeg_scan_info * scanptr, int ncomps,
-	    int Ss, int Se, int Ah, int Al)
-/* Support routine: generate one scan for each component */
-{
-  int ci;
-
-  for (ci = 0; ci < ncomps; ci++) {
-    scanptr->comps_in_scan = 1;
-    scanptr->component_index[0] = ci;
-    scanptr->Ss = Ss;
-    scanptr->Se = Se;
-    scanptr->Ah = Ah;
-    scanptr->Al = Al;
-    scanptr++;
-  }
-  return scanptr;
-}
-
-LOCAL(jpeg_scan_info *)
-fill_dc_scans (jpeg_scan_info * scanptr, int ncomps, int Ah, int Al)
-/* Support routine: generate interleaved DC scan if possible, else N scans */
-{
-  int ci;
-
-  if (ncomps <= MAX_COMPS_IN_SCAN) {
-    /* Single interleaved DC scan */
-    scanptr->comps_in_scan = ncomps;
-    for (ci = 0; ci < ncomps; ci++)
-      scanptr->component_index[ci] = ci;
-    scanptr->Ss = scanptr->Se = 0;
-    scanptr->Ah = Ah;
-    scanptr->Al = Al;
-    scanptr++;
-  } else {
-    /* Noninterleaved DC scan for each component */
-    scanptr = fill_scans(scanptr, ncomps, 0, 0, Ah, Al);
-  }
-  return scanptr;
-}
-
-
-/*
- * Create a recommended progressive-JPEG script.
- * cinfo->num_components and cinfo->jpeg_color_space must be correct.
- */
-
-GLOBAL(void)
-jpeg_simple_progression (j_compress_ptr cinfo)
-{
-  int ncomps = cinfo->num_components;
-  int nscans;
-  jpeg_scan_info * scanptr;
-
-  /* Safety check to ensure start_compress not called yet. */
-  if (cinfo->global_state != CSTATE_START)
-    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
-
-  /* Figure space needed for script.  Calculation must match code below! */
-  if (ncomps == 3 && cinfo->jpeg_color_space == JCS_YCbCr) {
-    /* Custom script for YCbCr color images. */
-    nscans = 10;
-  } else {
-    /* All-purpose script for other color spaces. */
-    if (ncomps > MAX_COMPS_IN_SCAN)
-      nscans = 6 * ncomps;	/* 2 DC + 4 AC scans per component */
-    else
-      nscans = 2 + 4 * ncomps;	/* 2 DC scans; 4 AC scans per component */
-  }
-
-  /* Allocate space for script.
-   * We need to put it in the permanent pool in case the application performs
-   * multiple compressions without changing the settings.  To avoid a memory
-   * leak if jpeg_simple_progression is called repeatedly for the same JPEG
-   * object, we try to re-use previously allocated space, and we allocate
-   * enough space to handle YCbCr even if initially asked for grayscale.
-   */
-  if (cinfo->script_space == NULL || cinfo->script_space_size < nscans) {
-    cinfo->script_space_size = MAX(nscans, 10);
-    cinfo->script_space = (jpeg_scan_info *)
-      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT,
-			cinfo->script_space_size * SIZEOF(jpeg_scan_info));
-  }
-  scanptr = cinfo->script_space;
-  cinfo->scan_info = scanptr;
-  cinfo->num_scans = nscans;
-
-  if (ncomps == 3 && cinfo->jpeg_color_space == JCS_YCbCr) {
-    /* Custom script for YCbCr color images. */
-    /* Initial DC scan */
-    scanptr = fill_dc_scans(scanptr, ncomps, 0, 1);
-    /* Initial AC scan: get some luma data out in a hurry */
-    scanptr = fill_a_scan(scanptr, 0, 1, 5, 0, 2);
-    /* Chroma data is too small to be worth expending many scans on */
-    scanptr = fill_a_scan(scanptr, 2, 1, 63, 0, 1);
-    scanptr = fill_a_scan(scanptr, 1, 1, 63, 0, 1);
-    /* Complete spectral selection for luma AC */
-    scanptr = fill_a_scan(scanptr, 0, 6, 63, 0, 2);
-    /* Refine next bit of luma AC */
-    scanptr = fill_a_scan(scanptr, 0, 1, 63, 2, 1);
-    /* Finish DC successive approximation */
-    scanptr = fill_dc_scans(scanptr, ncomps, 1, 0);
-    /* Finish AC successive approximation */
-    scanptr = fill_a_scan(scanptr, 2, 1, 63, 1, 0);
-    scanptr = fill_a_scan(scanptr, 1, 1, 63, 1, 0);
-    /* Luma bottom bit comes last since it's usually largest scan */
-    scanptr = fill_a_scan(scanptr, 0, 1, 63, 1, 0);
-  } else {
-    /* All-purpose script for other color spaces. */
-    /* Successive approximation first pass */
-    scanptr = fill_dc_scans(scanptr, ncomps, 0, 1);
-    scanptr = fill_scans(scanptr, ncomps, 1, 5, 0, 2);
-    scanptr = fill_scans(scanptr, ncomps, 6, 63, 0, 2);
-    /* Successive approximation second pass */
-    scanptr = fill_scans(scanptr, ncomps, 1, 63, 2, 1);
-    /* Successive approximation final pass */
-    scanptr = fill_dc_scans(scanptr, ncomps, 1, 0);
-    scanptr = fill_scans(scanptr, ncomps, 1, 63, 1, 0);
-  }
-}
-
-#endif /* C_PROGRESSIVE_SUPPORTED */

Engine/lib/ljpeg/jcphuff.c

@@ -1,833 +0,0 @@
-/*
- * jcphuff.c
- *
- * Copyright (C) 1995-1997, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains Huffman entropy encoding routines for progressive JPEG.
- *
- * We do not support output suspension in this module, since the library
- * currently does not allow multiple-scan files to be written with output
- * suspension.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-#include "jchuff.h"		/* Declarations shared with jchuff.c */
-
-#ifdef C_PROGRESSIVE_SUPPORTED
-
-/* Expanded entropy encoder object for progressive Huffman encoding. */
-
-typedef struct {
-  struct jpeg_entropy_encoder pub; /* public fields */
-
-  /* Mode flag: TRUE for optimization, FALSE for actual data output */
-  boolean gather_statistics;
-
-  /* Bit-level coding status.
-   * next_output_byte/free_in_buffer are local copies of cinfo->dest fields.
-   */
-  JOCTET * next_output_byte;	/* => next byte to write in buffer */
-  size_t free_in_buffer;	/* # of byte spaces remaining in buffer */
-  INT32 put_buffer;		/* current bit-accumulation buffer */
-  int put_bits;			/* # of bits now in it */
-  j_compress_ptr cinfo;		/* link to cinfo (needed for dump_buffer) */
-
-  /* Coding status for DC components */
-  int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */
-
-  /* Coding status for AC components */
-  int ac_tbl_no;		/* the table number of the single component */
-  unsigned int EOBRUN;		/* run length of EOBs */
-  unsigned int BE;		/* # of buffered correction bits before MCU */
-  char * bit_buffer;		/* buffer for correction bits (1 per char) */
-  /* packing correction bits tightly would save some space but cost time... */
-
-  unsigned int restarts_to_go;	/* MCUs left in this restart interval */
-  int next_restart_num;		/* next restart number to write (0-7) */
-
-  /* Pointers to derived tables (these workspaces have image lifespan).
-   * Since any one scan codes only DC or only AC, we only need one set
-   * of tables, not one for DC and one for AC.
-   */
-  c_derived_tbl * derived_tbls[NUM_HUFF_TBLS];
-
-  /* Statistics tables for optimization; again, one set is enough */
-  long * count_ptrs[NUM_HUFF_TBLS];
-} phuff_entropy_encoder;
-
-typedef phuff_entropy_encoder * phuff_entropy_ptr;
-
-/* MAX_CORR_BITS is the number of bits the AC refinement correction-bit
- * buffer can hold.  Larger sizes may slightly improve compression, but
- * 1000 is already well into the realm of overkill.
- * The minimum safe size is 64 bits.
- */
-
-#define MAX_CORR_BITS  1000	/* Max # of correction bits I can buffer */
-
-/* IRIGHT_SHIFT is like RIGHT_SHIFT, but works on int rather than INT32.
- * We assume that int right shift is unsigned if INT32 right shift is,
- * which should be safe.
- */
-
-#ifdef RIGHT_SHIFT_IS_UNSIGNED
-#define ISHIFT_TEMPS	int ishift_temp;
-#define IRIGHT_SHIFT(x,shft)  \
-	((ishift_temp = (x)) < 0 ? \
-	 (ishift_temp >> (shft)) | ((~0) << (16-(shft))) : \
-	 (ishift_temp >> (shft)))
-#else
-#define ISHIFT_TEMPS
-#define IRIGHT_SHIFT(x,shft)	((x) >> (shft))
-#endif
-
-/* Forward declarations */
-METHODDEF(boolean) encode_mcu_DC_first JPP((j_compress_ptr cinfo,
-					    JBLOCKROW *MCU_data));
-METHODDEF(boolean) encode_mcu_AC_first JPP((j_compress_ptr cinfo,
-					    JBLOCKROW *MCU_data));
-METHODDEF(boolean) encode_mcu_DC_refine JPP((j_compress_ptr cinfo,
-					     JBLOCKROW *MCU_data));
-METHODDEF(boolean) encode_mcu_AC_refine JPP((j_compress_ptr cinfo,
-					     JBLOCKROW *MCU_data));
-METHODDEF(void) finish_pass_phuff JPP((j_compress_ptr cinfo));
-METHODDEF(void) finish_pass_gather_phuff JPP((j_compress_ptr cinfo));
-
-
-/*
- * Initialize for a Huffman-compressed scan using progressive JPEG.
- */
-
-METHODDEF(void)
-start_pass_phuff (j_compress_ptr cinfo, boolean gather_statistics)
-{  
-  phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
-  boolean is_DC_band;
-  int ci, tbl;
-  jpeg_component_info * compptr;
-
-  entropy->cinfo = cinfo;
-  entropy->gather_statistics = gather_statistics;
-
-  is_DC_band = (cinfo->Ss == 0);
-
-  /* We assume jcmaster.c already validated the scan parameters. */
-
-  /* Select execution routines */
-  if (cinfo->Ah == 0) {
-    if (is_DC_band)
-      entropy->pub.encode_mcu = encode_mcu_DC_first;
-    else
-      entropy->pub.encode_mcu = encode_mcu_AC_first;
-  } else {
-    if (is_DC_band)
-      entropy->pub.encode_mcu = encode_mcu_DC_refine;
-    else {
-      entropy->pub.encode_mcu = encode_mcu_AC_refine;
-      /* AC refinement needs a correction bit buffer */
-      if (entropy->bit_buffer == NULL)
-	entropy->bit_buffer = (char *)
-	  (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				      MAX_CORR_BITS * SIZEOF(char));
-    }
-  }
-  if (gather_statistics)
-    entropy->pub.finish_pass = finish_pass_gather_phuff;
-  else
-    entropy->pub.finish_pass = finish_pass_phuff;
-
-  /* Only DC coefficients may be interleaved, so cinfo->comps_in_scan = 1
-   * for AC coefficients.
-   */
-  for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
-    compptr = cinfo->cur_comp_info[ci];
-    /* Initialize DC predictions to 0 */
-    entropy->last_dc_val[ci] = 0;
-    /* Get table index */
-    if (is_DC_band) {
-      if (cinfo->Ah != 0)	/* DC refinement needs no table */
-	continue;
-      tbl = compptr->dc_tbl_no;
-    } else {
-      entropy->ac_tbl_no = tbl = compptr->ac_tbl_no;
-    }
-    if (gather_statistics) {
-      /* Check for invalid table index */
-      /* (make_c_derived_tbl does this in the other path) */
-      if (tbl < 0 || tbl >= NUM_HUFF_TBLS)
-        ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tbl);
-      /* Allocate and zero the statistics tables */
-      /* Note that jpeg_gen_optimal_table expects 257 entries in each table! */
-      if (entropy->count_ptrs[tbl] == NULL)
-	entropy->count_ptrs[tbl] = (long *)
-	  (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				      257 * SIZEOF(long));
-      MEMZERO(entropy->count_ptrs[tbl], 257 * SIZEOF(long));
-    } else {
-      /* Compute derived values for Huffman table */
-      /* We may do this more than once for a table, but it's not expensive */
-      jpeg_make_c_derived_tbl(cinfo, is_DC_band, tbl,
-			      & entropy->derived_tbls[tbl]);
-    }
-  }
-
-  /* Initialize AC stuff */
-  entropy->EOBRUN = 0;
-  entropy->BE = 0;
-
-  /* Initialize bit buffer to empty */
-  entropy->put_buffer = 0;
-  entropy->put_bits = 0;
-
-  /* Initialize restart stuff */
-  entropy->restarts_to_go = cinfo->restart_interval;
-  entropy->next_restart_num = 0;
-}
-
-
-/* Outputting bytes to the file.
- * NB: these must be called only when actually outputting,
- * that is, entropy->gather_statistics == FALSE.
- */
-
-/* Emit a byte */
-#define emit_byte(entropy,val)  \
-	{ *(entropy)->next_output_byte++ = (JOCTET) (val);  \
-	  if (--(entropy)->free_in_buffer == 0)  \
-	    dump_buffer(entropy); }
-
-
-LOCAL(void)
-dump_buffer (phuff_entropy_ptr entropy)
-/* Empty the output buffer; we do not support suspension in this module. */
-{
-  struct jpeg_destination_mgr * dest = entropy->cinfo->dest;
-
-  if (! (*dest->empty_output_buffer) (entropy->cinfo))
-    ERREXIT(entropy->cinfo, JERR_CANT_SUSPEND);
-  /* After a successful buffer dump, must reset buffer pointers */
-  entropy->next_output_byte = dest->next_output_byte;
-  entropy->free_in_buffer = dest->free_in_buffer;
-}
-
-
-/* Outputting bits to the file */
-
-/* Only the right 24 bits of put_buffer are used; the valid bits are
- * left-justified in this part.  At most 16 bits can be passed to emit_bits
- * in one call, and we never retain more than 7 bits in put_buffer
- * between calls, so 24 bits are sufficient.
- */
-
-INLINE
-LOCAL(void)
-emit_bits (phuff_entropy_ptr entropy, unsigned int code, int size)
-/* Emit some bits, unless we are in gather mode */
-{
-  /* This routine is heavily used, so it's worth coding tightly. */
-  register INT32 put_buffer = (INT32) code;
-  register int put_bits = entropy->put_bits;
-
-  /* if size is 0, caller used an invalid Huffman table entry */
-  if (size == 0)
-    ERREXIT(entropy->cinfo, JERR_HUFF_MISSING_CODE);
-
-  if (entropy->gather_statistics)
-    return;			/* do nothing if we're only getting stats */
-
-  put_buffer &= (((INT32) 1)<<size) - 1; /* mask off any extra bits in code */
-  
-  put_bits += size;		/* new number of bits in buffer */
-  
-  put_buffer <<= 24 - put_bits; /* align incoming bits */
-
-  put_buffer |= entropy->put_buffer; /* and merge with old buffer contents */
-
-  while (put_bits >= 8) {
-    int c = (int) ((put_buffer >> 16) & 0xFF);
-    
-    emit_byte(entropy, c);
-    if (c == 0xFF) {		/* need to stuff a zero byte? */
-      emit_byte(entropy, 0);
-    }
-    put_buffer <<= 8;
-    put_bits -= 8;
-  }
-
-  entropy->put_buffer = put_buffer; /* update variables */
-  entropy->put_bits = put_bits;
-}
-
-
-LOCAL(void)
-flush_bits (phuff_entropy_ptr entropy)
-{
-  emit_bits(entropy, 0x7F, 7); /* fill any partial byte with ones */
-  entropy->put_buffer = 0;     /* and reset bit-buffer to empty */
-  entropy->put_bits = 0;
-}
-
-
-/*
- * Emit (or just count) a Huffman symbol.
- */
-
-INLINE
-LOCAL(void)
-emit_symbol (phuff_entropy_ptr entropy, int tbl_no, int symbol)
-{
-  if (entropy->gather_statistics)
-    entropy->count_ptrs[tbl_no][symbol]++;
-  else {
-    c_derived_tbl * tbl = entropy->derived_tbls[tbl_no];
-    emit_bits(entropy, tbl->ehufco[symbol], tbl->ehufsi[symbol]);
-  }
-}
-
-
-/*
- * Emit bits from a correction bit buffer.
- */
-
-LOCAL(void)
-emit_buffered_bits (phuff_entropy_ptr entropy, char * bufstart,
-		    unsigned int nbits)
-{
-  if (entropy->gather_statistics)
-    return;			/* no real work */
-
-  while (nbits > 0) {
-    emit_bits(entropy, (unsigned int) (*bufstart), 1);
-    bufstart++;
-    nbits--;
-  }
-}
-
-
-/*
- * Emit any pending EOBRUN symbol.
- */
-
-LOCAL(void)
-emit_eobrun (phuff_entropy_ptr entropy)
-{
-  register int temp, nbits;
-
-  if (entropy->EOBRUN > 0) {	/* if there is any pending EOBRUN */
-    temp = entropy->EOBRUN;
-    nbits = 0;
-    while ((temp >>= 1))
-      nbits++;
-    /* safety check: shouldn't happen given limited correction-bit buffer */
-    if (nbits > 14)
-      ERREXIT(entropy->cinfo, JERR_HUFF_MISSING_CODE);
-
-    emit_symbol(entropy, entropy->ac_tbl_no, nbits << 4);
-    if (nbits)
-      emit_bits(entropy, entropy->EOBRUN, nbits);
-
-    entropy->EOBRUN = 0;
-
-    /* Emit any buffered correction bits */
-    emit_buffered_bits(entropy, entropy->bit_buffer, entropy->BE);
-    entropy->BE = 0;
-  }
-}
-
-
-/*
- * Emit a restart marker & resynchronize predictions.
- */
-
-LOCAL(void)
-emit_restart (phuff_entropy_ptr entropy, int restart_num)
-{
-  int ci;
-
-  emit_eobrun(entropy);
-
-  if (! entropy->gather_statistics) {
-    flush_bits(entropy);
-    emit_byte(entropy, 0xFF);
-    emit_byte(entropy, JPEG_RST0 + restart_num);
-  }
-
-  if (entropy->cinfo->Ss == 0) {
-    /* Re-initialize DC predictions to 0 */
-    for (ci = 0; ci < entropy->cinfo->comps_in_scan; ci++)
-      entropy->last_dc_val[ci] = 0;
-  } else {
-    /* Re-initialize all AC-related fields to 0 */
-    entropy->EOBRUN = 0;
-    entropy->BE = 0;
-  }
-}
-
-
-/*
- * MCU encoding for DC initial scan (either spectral selection,
- * or first pass of successive approximation).
- */
-
-METHODDEF(boolean)
-encode_mcu_DC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
-{
-  phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
-  register int temp, temp2;
-  register int nbits;
-  int blkn, ci;
-  int Al = cinfo->Al;
-  JBLOCKROW block;
-  jpeg_component_info * compptr;
-  ISHIFT_TEMPS
-
-  entropy->next_output_byte = cinfo->dest->next_output_byte;
-  entropy->free_in_buffer = cinfo->dest->free_in_buffer;
-
-  /* Emit restart marker if needed */
-  if (cinfo->restart_interval)
-    if (entropy->restarts_to_go == 0)
-      emit_restart(entropy, entropy->next_restart_num);
-
-  /* Encode the MCU data blocks */
-  for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
-    block = MCU_data[blkn];
-    ci = cinfo->MCU_membership[blkn];
-    compptr = cinfo->cur_comp_info[ci];
-
-    /* Compute the DC value after the required point transform by Al.
-     * This is simply an arithmetic right shift.
-     */
-    temp2 = IRIGHT_SHIFT((int) ((*block)[0]), Al);
-
-    /* DC differences are figured on the point-transformed values. */
-    temp = temp2 - entropy->last_dc_val[ci];
-    entropy->last_dc_val[ci] = temp2;
-
-    /* Encode the DC coefficient difference per section G.1.2.1 */
-    temp2 = temp;
-    if (temp < 0) {
-      temp = -temp;		/* temp is abs value of input */
-      /* For a negative input, want temp2 = bitwise complement of abs(input) */
-      /* This code assumes we are on a two's complement machine */
-      temp2--;
-    }
-    
-    /* Find the number of bits needed for the magnitude of the coefficient */
-    nbits = 0;
-    while (temp) {
-      nbits++;
-      temp >>= 1;
-    }
-    /* Check for out-of-range coefficient values.
-     * Since we're encoding a difference, the range limit is twice as much.
-     */
-    if (nbits > MAX_COEF_BITS+1)
-      ERREXIT(cinfo, JERR_BAD_DCT_COEF);
-    
-    /* Count/emit the Huffman-coded symbol for the number of bits */
-    emit_symbol(entropy, compptr->dc_tbl_no, nbits);
-    
-    /* Emit that number of bits of the value, if positive, */
-    /* or the complement of its magnitude, if negative. */
-    if (nbits)			/* emit_bits rejects calls with size 0 */
-      emit_bits(entropy, (unsigned int) temp2, nbits);
-  }
-
-  cinfo->dest->next_output_byte = entropy->next_output_byte;
-  cinfo->dest->free_in_buffer = entropy->free_in_buffer;
-
-  /* Update restart-interval state too */
-  if (cinfo->restart_interval) {
-    if (entropy->restarts_to_go == 0) {
-      entropy->restarts_to_go = cinfo->restart_interval;
-      entropy->next_restart_num++;
-      entropy->next_restart_num &= 7;
-    }
-    entropy->restarts_to_go--;
-  }
-
-  return TRUE;
-}
-
-
-/*
- * MCU encoding for AC initial scan (either spectral selection,
- * or first pass of successive approximation).
- */
-
-METHODDEF(boolean)
-encode_mcu_AC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
-{
-  phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
-  register int temp, temp2;
-  register int nbits;
-  register int r, k;
-  int Se = cinfo->Se;
-  int Al = cinfo->Al;
-  JBLOCKROW block;
-
-  entropy->next_output_byte = cinfo->dest->next_output_byte;
-  entropy->free_in_buffer = cinfo->dest->free_in_buffer;
-
-  /* Emit restart marker if needed */
-  if (cinfo->restart_interval)
-    if (entropy->restarts_to_go == 0)
-      emit_restart(entropy, entropy->next_restart_num);
-
-  /* Encode the MCU data block */
-  block = MCU_data[0];
-
-  /* Encode the AC coefficients per section G.1.2.2, fig. G.3 */
-  
-  r = 0;			/* r = run length of zeros */
-   
-  for (k = cinfo->Ss; k <= Se; k++) {
-    if ((temp = (*block)[jpeg_natural_order[k]]) == 0) {
-      r++;
-      continue;
-    }
-    /* We must apply the point transform by Al.  For AC coefficients this
-     * is an integer division with rounding towards 0.  To do this portably
-     * in C, we shift after obtaining the absolute value; so the code is
-     * interwoven with finding the abs value (temp) and output bits (temp2).
-     */
-    if (temp < 0) {
-      temp = -temp;		/* temp is abs value of input */
-      temp >>= Al;		/* apply the point transform */
-      /* For a negative coef, want temp2 = bitwise complement of abs(coef) */
-      temp2 = ~temp;
-    } else {
-      temp >>= Al;		/* apply the point transform */
-      temp2 = temp;
-    }
-    /* Watch out for case that nonzero coef is zero after point transform */
-    if (temp == 0) {
-      r++;
-      continue;
-    }
-
-    /* Emit any pending EOBRUN */
-    if (entropy->EOBRUN > 0)
-      emit_eobrun(entropy);
-    /* if run length > 15, must emit special run-length-16 codes (0xF0) */
-    while (r > 15) {
-      emit_symbol(entropy, entropy->ac_tbl_no, 0xF0);
-      r -= 16;
-    }
-
-    /* Find the number of bits needed for the magnitude of the coefficient */
-    nbits = 1;			/* there must be at least one 1 bit */
-    while ((temp >>= 1))
-      nbits++;
-    /* Check for out-of-range coefficient values */
-    if (nbits > MAX_COEF_BITS)
-      ERREXIT(cinfo, JERR_BAD_DCT_COEF);
-
-    /* Count/emit Huffman symbol for run length / number of bits */
-    emit_symbol(entropy, entropy->ac_tbl_no, (r << 4) + nbits);
-
-    /* Emit that number of bits of the value, if positive, */
-    /* or the complement of its magnitude, if negative. */
-    emit_bits(entropy, (unsigned int) temp2, nbits);
-
-    r = 0;			/* reset zero run length */
-  }
-
-  if (r > 0) {			/* If there are trailing zeroes, */
-    entropy->EOBRUN++;		/* count an EOB */
-    if (entropy->EOBRUN == 0x7FFF)
-      emit_eobrun(entropy);	/* force it out to avoid overflow */
-  }
-
-  cinfo->dest->next_output_byte = entropy->next_output_byte;
-  cinfo->dest->free_in_buffer = entropy->free_in_buffer;
-
-  /* Update restart-interval state too */
-  if (cinfo->restart_interval) {
-    if (entropy->restarts_to_go == 0) {
-      entropy->restarts_to_go = cinfo->restart_interval;
-      entropy->next_restart_num++;
-      entropy->next_restart_num &= 7;
-    }
-    entropy->restarts_to_go--;
-  }
-
-  return TRUE;
-}
-
-
-/*
- * MCU encoding for DC successive approximation refinement scan.
- * Note: we assume such scans can be multi-component, although the spec
- * is not very clear on the point.
- */
-
-METHODDEF(boolean)
-encode_mcu_DC_refine (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
-{
-  phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
-  register int temp;
-  int blkn;
-  int Al = cinfo->Al;
-  JBLOCKROW block;
-
-  entropy->next_output_byte = cinfo->dest->next_output_byte;
-  entropy->free_in_buffer = cinfo->dest->free_in_buffer;
-
-  /* Emit restart marker if needed */
-  if (cinfo->restart_interval)
-    if (entropy->restarts_to_go == 0)
-      emit_restart(entropy, entropy->next_restart_num);
-
-  /* Encode the MCU data blocks */
-  for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
-    block = MCU_data[blkn];
-
-    /* We simply emit the Al'th bit of the DC coefficient value. */
-    temp = (*block)[0];
-    emit_bits(entropy, (unsigned int) (temp >> Al), 1);
-  }
-
-  cinfo->dest->next_output_byte = entropy->next_output_byte;
-  cinfo->dest->free_in_buffer = entropy->free_in_buffer;
-
-  /* Update restart-interval state too */
-  if (cinfo->restart_interval) {
-    if (entropy->restarts_to_go == 0) {
-      entropy->restarts_to_go = cinfo->restart_interval;
-      entropy->next_restart_num++;
-      entropy->next_restart_num &= 7;
-    }
-    entropy->restarts_to_go--;
-  }
-
-  return TRUE;
-}
-
-
-/*
- * MCU encoding for AC successive approximation refinement scan.
- */
-
-METHODDEF(boolean)
-encode_mcu_AC_refine (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
-{
-  phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
-  register int temp;
-  register int r, k;
-  int EOB;
-  char *BR_buffer;
-  unsigned int BR;
-  int Se = cinfo->Se;
-  int Al = cinfo->Al;
-  JBLOCKROW block;
-  int absvalues[DCTSIZE2];
-
-  entropy->next_output_byte = cinfo->dest->next_output_byte;
-  entropy->free_in_buffer = cinfo->dest->free_in_buffer;
-
-  /* Emit restart marker if needed */
-  if (cinfo->restart_interval)
-    if (entropy->restarts_to_go == 0)
-      emit_restart(entropy, entropy->next_restart_num);
-
-  /* Encode the MCU data block */
-  block = MCU_data[0];
-
-  /* It is convenient to make a pre-pass to determine the transformed
-   * coefficients' absolute values and the EOB position.
-   */
-  EOB = 0;
-  for (k = cinfo->Ss; k <= Se; k++) {
-    temp = (*block)[jpeg_natural_order[k]];
-    /* We must apply the point transform by Al.  For AC coefficients this
-     * is an integer division with rounding towards 0.  To do this portably
-     * in C, we shift after obtaining the absolute value.
-     */
-    if (temp < 0)
-      temp = -temp;		/* temp is abs value of input */
-    temp >>= Al;		/* apply the point transform */
-    absvalues[k] = temp;	/* save abs value for main pass */
-    if (temp == 1)
-      EOB = k;			/* EOB = index of last newly-nonzero coef */
-  }
-
-  /* Encode the AC coefficients per section G.1.2.3, fig. G.7 */
-  
-  r = 0;			/* r = run length of zeros */
-  BR = 0;			/* BR = count of buffered bits added now */
-  BR_buffer = entropy->bit_buffer + entropy->BE; /* Append bits to buffer */
-
-  for (k = cinfo->Ss; k <= Se; k++) {
-    if ((temp = absvalues[k]) == 0) {
-      r++;
-      continue;
-    }
-
-    /* Emit any required ZRLs, but not if they can be folded into EOB */
-    while (r > 15 && k <= EOB) {
-      /* emit any pending EOBRUN and the BE correction bits */
-      emit_eobrun(entropy);
-      /* Emit ZRL */
-      emit_symbol(entropy, entropy->ac_tbl_no, 0xF0);
-      r -= 16;
-      /* Emit buffered correction bits that must be associated with ZRL */
-      emit_buffered_bits(entropy, BR_buffer, BR);
-      BR_buffer = entropy->bit_buffer; /* BE bits are gone now */
-      BR = 0;
-    }
-
-    /* If the coef was previously nonzero, it only needs a correction bit.
-     * NOTE: a straight translation of the spec's figure G.7 would suggest
-     * that we also need to test r > 15.  But if r > 15, we can only get here
-     * if k > EOB, which implies that this coefficient is not 1.
-     */
-    if (temp > 1) {
-      /* The correction bit is the next bit of the absolute value. */
-      BR_buffer[BR++] = (char) (temp & 1);
-      continue;
-    }
-
-    /* Emit any pending EOBRUN and the BE correction bits */
-    emit_eobrun(entropy);
-
-    /* Count/emit Huffman symbol for run length / number of bits */
-    emit_symbol(entropy, entropy->ac_tbl_no, (r << 4) + 1);
-
-    /* Emit output bit for newly-nonzero coef */
-    temp = ((*block)[jpeg_natural_order[k]] < 0) ? 0 : 1;
-    emit_bits(entropy, (unsigned int) temp, 1);
-
-    /* Emit buffered correction bits that must be associated with this code */
-    emit_buffered_bits(entropy, BR_buffer, BR);
-    BR_buffer = entropy->bit_buffer; /* BE bits are gone now */
-    BR = 0;
-    r = 0;			/* reset zero run length */
-  }
-
-  if (r > 0 || BR > 0) {	/* If there are trailing zeroes, */
-    entropy->EOBRUN++;		/* count an EOB */
-    entropy->BE += BR;		/* concat my correction bits to older ones */
-    /* We force out the EOB if we risk either:
-     * 1. overflow of the EOB counter;
-     * 2. overflow of the correction bit buffer during the next MCU.
-     */
-    if (entropy->EOBRUN == 0x7FFF || entropy->BE > (MAX_CORR_BITS-DCTSIZE2+1))
-      emit_eobrun(entropy);
-  }
-
-  cinfo->dest->next_output_byte = entropy->next_output_byte;
-  cinfo->dest->free_in_buffer = entropy->free_in_buffer;
-
-  /* Update restart-interval state too */
-  if (cinfo->restart_interval) {
-    if (entropy->restarts_to_go == 0) {
-      entropy->restarts_to_go = cinfo->restart_interval;
-      entropy->next_restart_num++;
-      entropy->next_restart_num &= 7;
-    }
-    entropy->restarts_to_go--;
-  }
-
-  return TRUE;
-}
-
-
-/*
- * Finish up at the end of a Huffman-compressed progressive scan.
- */
-
-METHODDEF(void)
-finish_pass_phuff (j_compress_ptr cinfo)
-{   
-  phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
-
-  entropy->next_output_byte = cinfo->dest->next_output_byte;
-  entropy->free_in_buffer = cinfo->dest->free_in_buffer;
-
-  /* Flush out any buffered data */
-  emit_eobrun(entropy);
-  flush_bits(entropy);
-
-  cinfo->dest->next_output_byte = entropy->next_output_byte;
-  cinfo->dest->free_in_buffer = entropy->free_in_buffer;
-}
-
-
-/*
- * Finish up a statistics-gathering pass and create the new Huffman tables.
- */
-
-METHODDEF(void)
-finish_pass_gather_phuff (j_compress_ptr cinfo)
-{
-  phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
-  boolean is_DC_band;
-  int ci, tbl;
-  jpeg_component_info * compptr;
-  JHUFF_TBL **htblptr;
-  boolean did[NUM_HUFF_TBLS];
-
-  /* Flush out buffered data (all we care about is counting the EOB symbol) */
-  emit_eobrun(entropy);
-
-  is_DC_band = (cinfo->Ss == 0);
-
-  /* It's important not to apply jpeg_gen_optimal_table more than once
-   * per table, because it clobbers the input frequency counts!
-   */
-  MEMZERO(did, SIZEOF(did));
-
-  for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
-    compptr = cinfo->cur_comp_info[ci];
-    if (is_DC_band) {
-      if (cinfo->Ah != 0)	/* DC refinement needs no table */
-	continue;
-      tbl = compptr->dc_tbl_no;
-    } else {
-      tbl = compptr->ac_tbl_no;
-    }
-    if (! did[tbl]) {
-      if (is_DC_band)
-        htblptr = & cinfo->dc_huff_tbl_ptrs[tbl];
-      else
-        htblptr = & cinfo->ac_huff_tbl_ptrs[tbl];
-      if (*htblptr == NULL)
-        *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo);
-      jpeg_gen_optimal_table(cinfo, *htblptr, entropy->count_ptrs[tbl]);
-      did[tbl] = TRUE;
-    }
-  }
-}
-
-
-/*
- * Module initialization routine for progressive Huffman entropy encoding.
- */
-
-GLOBAL(void)
-jinit_phuff_encoder (j_compress_ptr cinfo)
-{
-  phuff_entropy_ptr entropy;
-  int i;
-
-  entropy = (phuff_entropy_ptr)
-    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				SIZEOF(phuff_entropy_encoder));
-  cinfo->entropy = (struct jpeg_entropy_encoder *) entropy;
-  entropy->pub.start_pass = start_pass_phuff;
-
-  /* Mark tables unallocated */
-  for (i = 0; i < NUM_HUFF_TBLS; i++) {
-    entropy->derived_tbls[i] = NULL;
-    entropy->count_ptrs[i] = NULL;
-  }
-  entropy->bit_buffer = NULL;	/* needed only in AC refinement scan */
-}
-
-#endif /* C_PROGRESSIVE_SUPPORTED */