Add support for integer IR_MUL.

src/lj_asm.c

@@ -2482,6 +2482,31 @@ static void asm_intarith(ASMState *as, IRIns *ir, x86Arith xa)
   ra_left(as, dest, lref);
 }
 
+static void asm_intmul(ASMState *as, IRIns *ir)
+{
+  IRRef lref = ir->op1;
+  IRRef rref = ir->op2;
+  int32_t k = 0;
+  if (asm_isk32(as, rref, &k)) {
+    /* NYI: use lea/shl/add/sub (FOLD only does 2^k) depending on CPU. */
+    Reg dest = ra_dest(as, ir, RSET_GPR);
+    Reg left = asm_fuseload(as, lref, RSET_GPR);
+    x86Op xo;
+    if (checki8(k)) {
+      emit_i8(as, k);
+      xo = XO_IMULi8;
+    } else {
+      emit_i32(as, k);
+      xo = XO_IMULi;
+    }
+    emit_rr(as, xo, REX_64IR(ir, dest), left);
+  } else {
+    /* NYI: integer multiply of non-constant operands. */
+    setintV(&as->J->errinfo, ir->o);
+    lj_trace_err_info(as->J, LJ_TRERR_NYIIR);
+  }
+}
+
 /* LEA is really a 4-operand ADD with an independent destination register,
 ** up to two source registers and an immediate. One register can be scaled
 ** by 1, 2, 4 or 8. This can be used to avoid moves or to fuse several
@@ -3445,7 +3470,12 @@ static void asm_ir(ASMState *as, IRIns *ir)
     else  /* Note: no need for LEA trick here. i-k is encoded as i+(-k). */
       asm_intarith(as, ir, XOg_SUB);
     break;
-  case IR_MUL: asm_fparith(as, ir, XO_MULSD); break;
+  case IR_MUL:
+    if (irt_isnum(ir->t))
+      asm_fparith(as, ir, XO_MULSD);
+    else
+      asm_intmul(as, ir);
+    break;
   case IR_DIV: asm_fparith(as, ir, XO_DIVSD); break;
 
   case IR_NEG: asm_fparith(as, ir, XO_XORPS); break;

src/lj_opt_fold.c

@@ -197,6 +197,7 @@ static int32_t kfold_intop(int32_t k1, int32_t k2, IROp op)
   switch (op) {
   case IR_ADD: k1 += k2; break;
   case IR_SUB: k1 -= k2; break;
+  case IR_MUL: k1 *= k2; break;
   case IR_BAND: k1 &= k2; break;
   case IR_BOR: k1 |= k2; break;
   case IR_BXOR: k1 ^= k2; break;
@@ -212,6 +213,7 @@ static int32_t kfold_intop(int32_t k1, int32_t k2, IROp op)
 
 LJFOLD(ADD KINT KINT)
 LJFOLD(SUB KINT KINT)
+LJFOLD(MUL KINT KINT)
 LJFOLD(BAND KINT KINT)
 LJFOLD(BOR KINT KINT)
 LJFOLD(BXOR KINT KINT)
@@ -680,6 +682,43 @@ LJFOLDF(simplify_intsub_k64)
   return RETRYFOLD;
 }
 
+static TRef simplify_intmul_k(jit_State *J, int32_t k)
+{
+  /* Note: many more simplifications are possible, e.g. 2^k1 +- 2^k2.
+  ** But this is mainly intended for simple address arithmetic.
+  ** Also it's easier for the backend to optimize the original multiplies.
+  */
+  if (k == 1) {  /* i * 1 ==> i */
+    return LEFTFOLD;
+  } else if ((k & (k-1)) == 0) {  /* i * 2^k ==> i << k */
+    fins->o = IR_BSHL;
+    fins->op2 = lj_ir_kint(J, lj_fls((uint32_t)k));
+    return RETRYFOLD;
+  }
+  return NEXTFOLD;
+}
+
+LJFOLD(MUL any KINT)
+LJFOLDF(simplify_intmul_k32)
+{
+  if (fright->i == 0)  /* i * 0 ==> 0 */
+    return INTFOLD(0);
+  else if (fright->i > 0)
+    return simplify_intmul_k(J, fright->i);
+  return NEXTFOLD;
+}
+
+LJFOLD(MUL any KINT64)
+LJFOLDF(simplify_intmul_k64)
+
+{
+  if (ir_kint64(fright)->u64 == 0)  /* i * 0 ==> 0 */
+    return lj_ir_kint64(J, 0);
+  else if (ir_kint64(fright)->u64 < 0x80000000u)
+    return simplify_intmul_k(J, (int32_t)ir_kint64(fright)->u64);
+  return NEXTFOLD;
+}
+
 LJFOLD(SUB any any)
 LJFOLD(SUBOV any any)
 LJFOLDF(simplify_intsub)
@@ -816,16 +855,17 @@ LJFOLD(BROL any KINT)
 LJFOLD(BROR any KINT)
 LJFOLDF(simplify_shift_ik)
 {
-  int32_t k = (fright->i & 31);
+  int32_t mask = irt_is64(fins->t) ? 63 : 31;
+  int32_t k = (fright->i & mask);
   if (k == 0)  /* i o 0 ==> i */
     return LEFTFOLD;
-  if (k != fright->i) {  /* i o k ==> i o (k & 31) */
+  if (k != fright->i) {  /* i o k ==> i o (k & mask) */
     fins->op2 = (IRRef1)lj_ir_kint(J, k);
     return RETRYFOLD;
   }
-  if (fins->o == IR_BROR) {  /* bror(i, k) ==> brol(i, (-k)&31) */
+  if (fins->o == IR_BROR) {  /* bror(i, k) ==> brol(i, (-k)&mask) */
     fins->o = IR_BROL;
-    fins->op2 = (IRRef1)lj_ir_kint(J, (-k)&31);
+    fins->op2 = (IRRef1)lj_ir_kint(J, (-k)&mask);
     return RETRYFOLD;
   }
   return NEXTFOLD;
@@ -841,9 +881,10 @@ LJFOLDF(simplify_shift_andk)
   IRIns *irk = IR(fright->op2);
   PHIBARRIER(fright);
   if ((fins->o < IR_BROL ? LJ_TARGET_MASKSHIFT : LJ_TARGET_MASKROT) &&
-      irk->o == IR_KINT) {  /* i o (j & 31) ==> i o j */
-    int32_t k = irk->i & 31;
-    if (k == 31) {
+      irk->o == IR_KINT) {  /* i o (j & mask) ==> i o j */
+    int32_t mask = irt_is64(fins->t) ? 63 : 31;
+    int32_t k = irk->i & mask;
+    if (k == mask) {
       fins->op2 = fright->op1;
       return RETRYFOLD;
     }
@@ -870,9 +911,29 @@ LJFOLDF(simplify_shift2_ki)
   return NEXTFOLD;
 }
 
+LJFOLD(BSHL KINT64 any)
+LJFOLD(BSHR KINT64 any)
+LJFOLDF(simplify_shift1_ki64)
+{
+  if (ir_kint64(fleft)->u64 == 0)  /* 0 o i ==> 0 */
+    return LEFTFOLD;
+  return NEXTFOLD;
+}
+
+LJFOLD(BSAR KINT64 any)
+LJFOLD(BROL KINT64 any)
+LJFOLD(BROR KINT64 any)
+LJFOLDF(simplify_shift2_ki64)
+{
+  if (ir_kint64(fleft)->u64 == 0 || (int64_t)ir_kint64(fleft)->u64 == -1)
+    return LEFTFOLD;  /* 0 o i ==> 0; -1 o i ==> -1 */
+  return NEXTFOLD;
+}
+
 /* -- Reassociation ------------------------------------------------------- */
 
 LJFOLD(ADD ADD KINT)
+LJFOLD(MUL MUL KINT)
 LJFOLD(BAND BAND KINT)
 LJFOLD(BOR BOR KINT)
 LJFOLD(BXOR BXOR KINT)
@@ -924,14 +985,15 @@ LJFOLDF(reassoc_shift)
   IRIns *irk = IR(fleft->op2);
   PHIBARRIER(fleft);  /* The (shift any KINT) rule covers k2 == 0 and more. */
   if (irk->o == IR_KINT) {  /* (i o k1) o k2 ==> i o (k1 + k2) */
-    int32_t k = (irk->i & 31) + (fright->i & 31);
-    if (k > 31) {  /* Combined shift too wide? */
+    int32_t mask = irt_is64(fins->t) ? 63 : 31;
+    int32_t k = (irk->i & mask) + (fright->i & mask);
+    if (k > mask) {  /* Combined shift too wide? */
       if (fins->o == IR_BSHL || fins->o == IR_BSHR)
-	return INTFOLD(0);
+	return mask == 31 ? INTFOLD(0) : lj_ir_kint64(J, 0);
       else if (fins->o == IR_BSAR)
-	k = 31;
+	k = mask;
       else
-	k &= 31;
+	k &= mask;
     }
     fins->op1 = fleft->op1;
     fins->op2 = (IRRef1)lj_ir_kint(J, k);

src/lj_target_x86.h

@@ -218,6 +218,7 @@ typedef enum {
   XO_SHIFTi =	XO_(c1),
   XO_SHIFT1 =	XO_(d1),
   XO_SHIFTcl =	XO_(d3),
+  XO_IMULi =	XO_(69),
   XO_IMULi8 =	XO_(6b),
   XO_CMP =	XO_(3b),
   XO_TEST =	XO_(85),