mono/mcs/class/System.ServiceModel/System.ServiceModel.Channels/ChangeLog

2009-06-29  Atsushi Enomoto  <[email protected]>

	* TcpDuplexSessionChannel.cs : do not output all (stored) writer
	  session strings but output only those new ones in current message.
	  This fixes inconsistent body output in repetitive use of sender.

2009-06-26  Atsushi Enomoto  <[email protected]>

	* TcpDuplexSessionChannel.cs : handle EndRecord for repetitive
	  operation that does not involve session.
	  Preserve writer session as well as reader session.
	* MessageHeaders.cs : take name and namespace into consideration
	  when creating a serializer.

2009-06-25  Atsushi Enomoto  <[email protected]>

	* TcpChannelListener.cs, TcpDuplexSessionChannel.cs :
	  Made required changes for repeated use of message exchanges.
	  Hold binary reader session. The channels use it incrementally.
	  Preambles are handled at Open, and EndRecords are handled at
	  Close, Add session shutdown hook here (not working yet though).

2009-06-18  Atsushi Enomoto  <[email protected]>

	* ChannelListenerBase_1.cs : added cancellation hook here too.
	  HttpChannelListener.cs : use above.
	  Do not allow parallel channel creation (this listener does not
	  allow more than one AcceptChannel().

2009-06-18  Atsushi Enomoto  <[email protected]>

	* ReplyChannelBase.cs, HttpReplyChannel.cs :
	  Add cancellation hook for async TryReceiveRequest.

2009-06-18  Atsushi Enomoto  <[email protected]>

	* HttpChannelListener.cs, HttpListenerManager.cs :
	  slightly improved BuildChannelListener().
	  Implement OnAbort() and differentiate it from OnClose().

2009-06-18  Atsushi Enomoto  <[email protected]>

	* TcpDuplexSessionChannel.cs : remove NIE stubs.

2009-06-18  Atsushi Enomoto  <[email protected]>

	* DuplexChannelBase.cs : simple async delegate calls here too.

2009-06-16  Atsushi Enomoto  <[email protected]>

	* ReplyChannelBase.cs : cosmetic dependency reduction on listener.

2009-06-16  Atsushi Enomoto  <[email protected]>

	* HttpReplyChannel.cs : cosometic simplification.

2009-06-16  Atsushi Enomoto  <[email protected]>

	* HttpRequestChannel.cs : Fixed timeout handling. It was causing
	  infinite block in 2.0 profile.

2009-06-12  Atsushi Enomoto  <[email protected]>

	* TcpChannelListener.cs, TcpDuplexSessionChannel.cs :
	  more careful close to avoid NRE.

2009-06-12  Atsushi Enomoto  <[email protected]>

	* HttpChannelListener.cs : do not Close() more than once (though
	  it is allowed to call it twice, we don't reject it; just ignore).

2009-06-12  Atsushi Enomoto  <[email protected]>

	* CustomBinding.cs : copy timeouts from argument binding in copy ctr.

2009-06-11  Atsushi Enomoto  <[email protected]>

	* HttpReplyChannel.cs : reject multiple WaitForRequest calls.
	  Temporarily disable HTTP Keep-Alive since it somehow results in
	  wrong reuse of connection (shown as NRE in HttpConnection).
	  Make sure to close RequestContext which was created from it.
	* HttpRequestContext.cs : simplify.

2009-06-11  Atsushi Enomoto  <[email protected]>

	* HttpChannelListener.cs, TcpChannelListener.cs,
	  ChannelListenerBase_1.cs : put common internal listener base
	  and let it handle those async stuff.

2009-06-10  Atsushi Enomoto  <[email protected]>

	* ReplyChannelBase.cs : fix wrong null delegate check point.

2009-06-10  Atsushi Enomoto  <[email protected]>

	* HttpReplyChannel.cs, ReplyChannelBase.cs : async operations are
	  now implemented as virtual in base class. Remove NIEs in http.

2009-06-10  Atsushi Enomoto  <[email protected]>

	* HttpChannelListener.cs : hack async implementation.

2009-06-08  Atsushi Enomoto  <[email protected]>

	* HttpListenerManager.cs : oops, extra line removal.

2009-06-08  Atsushi Enomoto  <[email protected]>

	* HttpChannelManager.cs, HttpListenerManager.cs : rename file too.

2009-06-08  Atsushi Enomoto  <[email protected]>

	* HttpChannelManager.cs, HttpChannelListener.cs: renaming, as
	  "ChannelManager" is confusing (there is ChannelManagerBase).

2009-06-08  Atsushi Enomoto  <[email protected]>

	* HttpChannelManager.cs, HttpTransportBindingElement.cs,
	  HttpReplyChannel.cs, AspNetReplyChannel.cs, HttpChannelListener.cs:
	  they should be split into separate listener->reply channel lines
	  (remove "if (HostingEnvironment.IsAspNet)".)

2009-06-08  Atsushi Enomoto  <[email protected]>

	* CommunicationObject.cs : OnClosed() requires call to base method.
	  Close() could rather abort the channel, and Abort() does not
	  always invke OnAbort().
	* ChannelBase.cs : add call to base as above.

2009-06-05  Sebastien Pouliot  <[email protected]>

	* ClientAccessPolicy.cs: Removed
	* CrossDomainAccessManager.cs: Removed
	* CrossDomainPolicy.cs: Removed
	* HttpRequestChannel.cs: Remove call to CrossDomainAccessManager 
	since this is now done inside the BeginGetResponse call (outside
	this assembly) for Moonlight (NET_2_1)

2009-06-04  Alan McGovern  <[email protected]>

	* HttpRequestChannel.cs : Rewrite ProcessRequest to use the async APIs
	instead of the sync apis. Prevents a possible deadlock condition in
	moonlight. 

2009-06-03  Atsushi Enomoto  <[email protected]>

	* HttpRequestChannel.cs : that SL2/ML2 does not seem to allow null
	  callbacks, so add hacky ones.

2009-06-01  Atsushi Enomoto  <[email protected]>

	* TcpDuplexSessionChannel.cs : WaitForMessage() should not return
	  true when socket input is not available.

2009-05-29  Atsushi Enomoto  <[email protected]>

	* TcpDuplexSessionChannel.cs : Moved tcp listener accept to OnOpen().
	  I cannot precisely identify when EndRecord should be consumed,
	  so allow it at either at the end of ReadSizedMessage() or on
	  consuming preamble (it's likely handling EndRecord of previous
	  message though).

	  Now duplex IPeerResolverContract communication works between
	  either of .NET/Mono client and .NET/Mono server.

2009-05-29  Atsushi Enomoto  <[email protected]>

	* TcpDuplexSessionChannel.cs : looks like I have added some bogus
	  code. Handle preamble ack on ReadSizedMessage() only at server.
	  Consume EndRecord from server, at client side. Though it is likely
	  changed as it's blocking when mono is at server side.

2009-05-29  Atsushi Enomoto  <[email protected]>

	* TcpDuplexSessionChannel.cs : .NET seems to be based on somewhat
	  different protocol than existing code with related to preamble ack.
	  So changed it to work fine with .NET client (finally).

2009-05-28  Atsushi Enomoto  <[email protected]>

	* MessageBufferImpl.cs : do not output Action twice.

2009-05-28  Atsushi Enomoto  <[email protected]>

	* MessageBufferImpl.cs : it did not copy headers.
	* Message.cs : remove 2_1 conditional implementation for buffered
	  copy and hence remove bogus code.

2009-05-28  Atsushi Enomoto  <[email protected]>

	* MessageProperties.cs : copy argument is wrong.

2009-05-27  Atsushi Enomoto  <[email protected]>

	* PeerCustomResolverBindingElement.cs : some argument check.

2009-05-27  Atsushi Enomoto  <[email protected]>

	* BinaryMessageEncoder.cs : the serializer somehow leaves binary
	  xml open, so close the writer as well as open elements.
	* TcpDuplexSessionChannel.cs : clear write buffer on each operation.
	  Do not output EndRecord and SizedMessage at a time.

2009-05-26  Atsushi Enomoto  <[email protected]>

	* TcpDuplexSessionChannel.cs : there was a miscalculation on the
	  length of the SizedMessage in the output.

2009-05-26  Atsushi Enomoto  <[email protected]>

	* CommunicationObject.cs : use sane default timeout.
	* PeerCustomResolverBindingElement.cs : check timeout arg sanity.
	* TcpDuplexSessionChannel.cs : ditto.

2009-05-26  Atsushi Enomoto  <[email protected]>

	* TcpDuplexSessionChannel.cs : It seems that buffered stream channel
	  only accepts buffered messages, so do as such for write buffers.
	  Add RelatesTo header.

2009-05-26  Atsushi Enomoto  <[email protected]>

	* DuplexSessionChannelBase.cs, DuplexChannelBase.cs:
	  rename from former to latter.

2009-05-25  Atsushi Enomoto  <[email protected]>

	* TcpDuplexSessionChannel.cs : reader does not always return full
	  buffer (depending on the stream).

2009-05-25  Atsushi Enomoto  <[email protected]>

	* PeerDuplexChannel.cs, PeerOutputChannel.cs : use new PeerNode.ctor.

2009-05-25  Atsushi Enomoto  <[email protected]>

	* PeerCustomResolverBindingElement.cs : (Resolve) returned addresses
	  could be null.

2009-05-22  Atsushi Enomoto  <[email protected]>

	* ChannelManagerBase.cs : there was annoying non-2.1 stuff.

2009-05-22  Atsushi Enomoto  <[email protected]>

	* TcpChannelListener.cs, TcpChannelFactory.cs : get reader quotas.

2009-05-22  Atsushi Enomoto  <[email protected]>

	* ChannelManagerBase.cs : fix wrong session channel detection.

2009-05-22  Atsushi Enomoto  <[email protected]>

	* BinaryMessageEncoderFactory.cs, BinaryMessageEncoder.cs
	  This encoder factory implements CreateSessionEncoder() and binary
	  encoder does support session transmit, in different media type.
	* ChannelManagerBase.cs : added utility method to create appropriate
	  encoder.
	* HttpChannelFactory.cs, HttpChannelListener.cs,
	  MsmqChannelFactory.cs, MsmqChannelListener.cs,
	  PeerChannelFactory.cs, PeerChannelListener.cs,
	  TcpChannelFactory.cs, TcpChannelListener.cs : use above.

2009-05-22  Atsushi Enomoto  <[email protected]>

	* TcpDuplexSessionChannel.cs : add ReplyTo header.

2009-05-21  Atsushi Enomoto  <[email protected]>

	* DuplexSessionBase.cs : new file, for session implementation.
	* TcpDuplexSessionChannel.cs, PeerDuplexChannel.cs,
	  DuplexSessionChannelBase.cs : changed sync/async implementation
	  pattern. Now async methods call sync methods using delegates.

2009-05-21  Atsushi Enomoto  <[email protected]>

	* InputChannelBase.cs, TransportBindingElement.cs, RequestContext.cs:
	  a few minor API fixes.

2009-05-21  Atsushi Enomoto  <[email protected]>

	* MessageEncoderFactory.cs : implement CreateSessionEncoder().

2009-05-19  Atsushi Enomoto  <[email protected]>

	* TcpDuplexSessionChannel.cs : add To header.

2009-05-19  Atsushi Enomoto  <[email protected]>

	* MessageFault.cs : fix several SOAP12 fault deserialization in xml
	  parsing.

2009-05-18  Atsushi Enomoto  <[email protected]>

	* FaultConverter.cs : avoid NRE for null IncomingMessageHeaders.

2009-05-15  Atsushi Enomoto  <[email protected]>

	* MessageFault.cs : Reason is mandatory. raise XmlException, and
	  CommunicationException in each CreateFault().

2009-05-15  Atsushi Enomoto  <[email protected]>

	* TcpDuplexSessionChannel.cs : on listener side, get TcpClient at
	  Open(). Some (but not all yet) continuous communication works now.
	  Use ProtocolException. Remove dummy binary session string.

2009-05-14  Atsushi Enomoto  <[email protected]>

	* TcpDuplexSessionChannel.cs : more [MC-NMF] implementation. Moved
	  sending/receiving SizedMessageRecord parts to manager class.
	  Handle writer session, though it is likely broken at dictionary
	  writer part (no string is written so far).
	* BinaryMessageEncoder.cs : add writer session and rename reader
	  session.

2009-05-14  Atsushi Enomoto  <[email protected]>

	* TcpDuplexSessionChannel.cs : more [MC-NMF] implementation. Via uri
	  is mandatory in initiator preamble packet. Handle Fault reply in
	  initiator preamble.

2009-05-14  Atsushi Enomoto  <[email protected]>

	* TcpDuplexSessionChannel.cs : ongoing refactoring to collect [MC-NMF]
	  based communication under TcpBinaryFrameManager class.

2009-05-13  Jb Evain  <[email protected]>

	* MessageHeader.cs: use a SL friendly way of creating an XmlReader
	from a StringReader.

2009-05-13  Atsushi Enomoto  <[email protected]>

	* MessageImpl.cs, MessageHeader.cs : eliminate xlinq in 2.1, and
	  actually eliminate DOM-based implementation too in 2.0.

2009-04-28  Atsushi Enomoto  <[email protected]>

	* TcpDuplexSessionChannel.cs : implement in-band dictionary support
	  in [MC-NMF] and [MC-NBFSE], used in duplex channels. Added some
	  comments for magic numbers based on [MC-NMF].

2009-04-28  Atsushi Enomoto  <[email protected]>

	* BinaryMessageEncoder.cs : implement part of in-band dictionary
	  support for [MC-NBFSE] record in [MC-NMF], in this class.

2009-04-28  Atsushi Enomoto  <[email protected]>

	* BinaryMessageEncodingBindingElement.cs : clear extra public members.

2009-04-27  Atsushi Enomoto  <[email protected]>

	* TcpDuplexSessionChannel.cs : implemented some channel methods.

2009-04-27  Atsushi Enomoto  <[email protected]>

	* BinaryMessageEncoder.cs : use XmlDictionary specified as [MC-NBFS].

2009-04-27  Atsushi Enomoto  <[email protected]>

	* ChannelManagerBase.cs : implement Open/CloseTimeout correctly.

2009-04-23  Atsushi Enomoto  <[email protected]>

	* BinaryMessageEncoder.cs : use quotas in binding element.
	  Implement WriteMessage().

2009-04-22  Atsushi Enomoto  <[email protected]>

	* PeerCustomResolverBindingElement.cs : do initialize field.

2009-04-21  Atsushi Enomoto  <[email protected]>

	* PeerCustomResolverBindingElement.cs :
	  implement full custom resolver.

2009-04-21  Atsushi Enomoto  <[email protected]>

	* PeerDuplexChannel.cs, PeerChannelListener.cs,
	  PeerOutputChannel.cs, PeerCustomResolverBindingElement.cs,
	  PeerChannelFactory.cs : ongoing p2p channel implementation.

2009-04-21  Atsushi Enomoto  <[email protected]>

	* PnrpPeerResolverBindingElement.cs : sync with PeerResolver changes.

2009-04-21  Atsushi Enomoto  <[email protected]>

	* BinaryMessageEncodingBindingElement.cs, ChannelBase.cs,
	  ChannelFactoryBase.cs, WindowsStreamSecurityBindingElement.cs :
	  implement GetProperty<T>(). Return documented objects or null.

2009-04-20  Atsushi Enomoto  <[email protected]>

	* PeerChannelFactory.cs, PeerChannelListener.cs,
	  PeerCustomResolverBindingElement.cs, PeerDuplexChannel.cs
	  PeerInputChannel.cs, PeerOutputChannel.cs :
	  new; ongoing peer transport implementation.
	* DuplexSessionChannelBase.cs, InputChannelBase.cs
	  MsmqOutputChannel.cs, OutputChannelBase.cs,
	  PeerResolverBindingElement.cs, PeerTransportBindingElement.cs,
	  PnrpPeerResolverBindingElement.cs, TcpDuplexSessionChannel.cs :
	  several internal changes (either required or for simplification)
	  for ongoing peer transport implementation.

2009-04-08  Atsushi Enomoto  <[email protected]>

	* PeerTransportBindingElement.cs : ListenIPAddress is IPAddress.

2009-04-07  Atsushi Enomoto  <[email protected]>

	* TcpTransportBindingElement.cs : check build-ability before
	  actually building channels.
	* ConnectionOrientedTransportBindingElement.cs : fixed build-ability
	  conditions according to MSDN.

2009-03-05  Atsushi Enomoto  <[email protected]>

	* MessageHeader.cs, MessageHeaders.cs, MessageImpl.cs :
	  handle headers in SL2. Slightly changed 3.0 code too.

2009-03-04  Atsushi Enomoto  <[email protected]>

	* HttpRequestChannel.cs : use cross domain access manager.

2009-02-27  Atsushi Enomoto  <[email protected]>

	* Message.cs : (in CreateBufferedCopy) do not pass the entire
	  message as BodyWriter.
	  (in GetReaderAtBodyContents) just write body contents.
	* MessageImpl.cs : do not try to read body at ctor (fixed tons
	  of test failures).
	  Add some state check in GetReaderAtBodyContents().
	* XmlReaderBodyWriter.cs : avoid possible extra xmldecl onto output.

2009-02-18  Atsushi Enomoto  <[email protected]>

	* Message.cs : do not forget to flush.
	* HttpRequestChannel.cs : give more exact error info.

2009-02-18  Atsushi Enomoto  <[email protected]>

	* Message.cs, MessageBufferImpl.cs, XmlReaderBodyWriter.cs :
	  make buffered copy in ML2 really buffered.

2009-02-12  Atsushi Enomoto  <[email protected]>

	* Message.cs : if there is no header item to write, do not write
	  SOAP header element.

2009-01-22  Alan McGovern  <[email protected]>

	* MessageHeaders.cs : List<T>.RemoveAll(Predicate<T>) doesn't exist in Silverlight.
	Rewrite to avoid usage of it.

2009-01-14  Atsushi Enomoto  <[email protected]>

	* ChannelParameterCollection.cs : implement, rather than NIE.

2008-05-22  Noam Lampert <[email protected]>

	* MessageFault.cs: Correctly serialize ExceptionDetails. Expose SimpleMessageFault to allow
	  internal users to know the type of the detail. 
	
2008-05-20  Noam Lampert <[email protected]>

	* Message.c: Use private setter for state private variable to ease debugging.
				 Modify ToString not to change the state, as it is called quite often by VS debugger
				 
2008-04-21  Roei Erez <[email protected]>

	* HttpChannleManager: Fix for multithreaded use.
	* HttpReplyChannel: Fix crash during sutdown.

2008-04-17  Igor Zelmanovich <[email protected]>

	* HttpChannleManager: ensure trailing slash in uri.

2008-04-17  Vladimir Krasnov  <[email protected]>

	* added: HttpChannleManager,
	* HttpChannelListener: added use of HttpChannelManager

2008-04-17  Vladimir Krasnov  <[email protected]>

	* MessageEncodingBindingElement.cs: fixed ctor

2008-04-17  Vladimir Krasnov  <[email protected]>

	* XmlReaderBodyWriter.cs: fixed ctor, skip xml declaration

2008-04-17  Vladimir Krasnov  <[email protected]>

	* HttpReplyChannel.cs: fixed TryReceiveRequest, fix message header To

2008-04-17  Vladimir Krasnov  <[email protected]>

	* MessageFault.cs: fixed CreateFault11, implemented "detail"

2008-04-17  Noam Lampert <[email protected]>

	* HttpReplyChannel.cs: fix API - Fix crash during service shutdown.

2008-04-13  Igor Zelmanovich <[email protected]>

	* BindingElementCollection.cs: fix API - .ctor's signature.

2008-04-10  Eyal Alaluf <[email protected]>

	* XmlSerializerBodyWriter.cs: Removed.

2008-03-25  Vladimir Krasnov  <[email protected]>

	* MessageFault.cs: fixed WriteReason, .net XmlWriter compatible

2008-02-20  Atsushi Enomoto  <[email protected]>

	* DuplexSessionChannelBase.cs : made it non-session (more reusable).
	* TcpChannelFactory.cs, TcpChannelListener.cs :
	  unify factory and listener into TcpChannelInfo for use in
	  TCP channel implementation. Do not store stream in the listener.
	  Factory now uses BinaryMessageEncoder.
	* TcpDuplexSessionChannel.cs : changes explained above, and now it
	  holds TcpClient that the listener has accepted.

	  tcp-transport-binding-element sample now communicates (though
	  only when both sides are mono: there seems binary mismatch).

2008-02-20  Atsushi Enomoto  <[email protected]>

	* TcpTransportBindingElement.cs, TcpConnectionPoolSettings.cs :
	  clone connection pool settings too.
	* NamedPipetransportBindingElement.cs,
	  NamedPipeConnectionPoolSettings.cs : let's clean them up too (not
	  being likely implemented though).

2008-02-20  Atsushi Enomoto  <[email protected]>

	* ConnectionOrientedTransportBindingElement.cs, 
	  TcpTransportBindingElement.cs : some API updates.
	  Initialize default values.
	* TcpConnectionPoolSettings.cs : new file.

2008-02-18  Atsushi Enomoto  <[email protected]>

	* ServiceHostParser.cs, SvcHttpHandlerFactory.cs, SvcHttpHandler.cs:
	  added support for "factory" attribute.

2008-02-15  Atsushi Enomoto  <[email protected]>

	* HttpRequestContent.cs : consider HttpResponseMessageProperty.

2008-02-15  Atsushi Enomoto  <[email protected]>

	* HttpRequestChannel.cs : pass response ContentType to ReadMessage().

2008-02-15  Atsushi Enomoto  <[email protected]>

	* HttpRequestChannel.cs : create WebRequest against To message header
	  item (if exists).
	  Consider HttpRequestMessageProperty.
	  Do not output body when suppressed or the method is GET.

2008-02-15  Atsushi Enomoto  <[email protected]>

	* HttpChannelListener.cs : BindingContext may not have listenUri
	  at its .ctor() step.

2008-02-08  Atsushi Enomoto  <[email protected]>

	* BindingContext.cs : RemainingBindingElements is not just a dummy
	  collection but is actually user-controlled.

2008-02-08  Atsushi Enomoto  <[email protected]>

	* TcpChannelFactory.cs, TcpChannelListener.cs, 
	  HttpChannelFactory.cs, HttpChannelListener.cs,
	  MsmqChannelFactory.cs, MsmqChannelListener.cs,
	  TextMessageEncodingBindingElement.cs,
	  BinaryMessageEncodingBindingElement.cs,
	  MtomMessageEncodingBindingElement.cs :
	  message encoder should be retrieved only through public API.
	* BindingContext.cs : so my old guess was wrong.

	See also: http://blogs.msdn.com/drnick/archive/2006/05/10/594134.aspx

2008-02-05  Atsushi Enomoto  <[email protected]>

	* HttpTransportBindingElement.cs : implemented copy constructor.

2007-08-20  Atsushi Enomoto  <[email protected]>

	* HttpRequestChannel.cs, HttpReplyChannel.cs : treat SOAPAction HTTP
	  header when AddressingVersion is None.

2007-08-20  Atsushi Enomoto  <[email protected]>

	* MessageHeaders.cs : AddressingVersion.None rejects some WSA
	  property setters.

2007-08-19  Atsushi Enomoto  <[email protected]>

	* OneWayBindingElementImporter.cs
	  CompositeDuplexBindingElementImporter.cs : new files.

2007-08-17  Atsushi Enomoto  <[email protected]>

	* MessageHeaders.cs : due to the DataContractSerializer.ReadObject()
	  semantic change, its bool parameter must be false, not true.

2007-07-13  Atsushi Enomoto  <[email protected]>

	* InputChannelBase.cs, MsmqChannelListener.cs, MsmqInputChannel.cs :
	  new files. Msmq transport listener Implementation.
	* MsmqOutputChannel.cs : implemented Send(). Not sure if it works
	  (wait for System.Messaging impl.)
	* HttpReplyChannel.cs : added comment

2007-07-06  Atsushi Enomoto  <[email protected]>

	* MsmqChannelFactory.cs MsmqOutputChannel.cs OutputChannelBase.cs :
	  new files. internal stuff for msmq channel.
	* BinaryMessageEncoder.cs : added another .ctor().
	* MsmqTransportBindingElement.cs :
	  implemented [Can]BuildChannelFactory().

2007-07-06  Atsushi Enomoto  <[email protected]>

	* MsmqBindingElementBase.cs MsmqTransportBindingElement.cs :
	  initialize some fields.

2007-07-05  Atsushi Enomoto  <[email protected]>

	* MsmqBindingElementBase.cs MsmqMessageProperty.cs
	  MsmqTransportBindingElement.cs ITransactedBindingElement.cs :
	  couple of msmq stubs.

2007-04-02  Atsushi Enomoto  <[email protected]>

	* SecureMessageGenerator.cs : SecurityContextToken support (though
	  it is still regarded as invalid by WCF).

2007-03-13  Atsushi Enomoto  <[email protected]>

	* WSSecurityMessageHeader.cs, SecureMessageGenerator.cs :
	  make header.Contents.Add() more strict.
	  Use HasAsymmetricKey to determine whether to use asymmetric algorithm
	  or not.
	  Added some hack to allow ssl token external mode.
	  Commented out such lines that always premised asymmtric key.

2007-03-08  Atsushi Enomoto  <[email protected]>

	* TransactionFlowBindingElement.cs : forgot necessary Clone().

2007-03-08  Atsushi Enomoto  <[email protected]>

	* MessageSecurityBindingSupport.cs : support check to create
	  authenticator is now done in both initiator/recipient sides.
	* SecurityRequestContext.cs : don't encrypt WS-Trust RSTR.

2007-03-07  Atsushi Enomoto  <[email protected]>

	* MessageSecurityBindingSupport.cs : for now, comment out the code
	  that makes authenticator creation optional.
	* SecurityRequestContext.cs : don't decrypt message when it is
	  WS-Trust messages. Also, do not secure SOAP Fault (it is likely
	  to fail).
	* SecurityChannelListener.cs : GetProperty<T>() now returns
	  MessageSecurityBindingSupport when requested. It is used by
	  EndpointDispatcher to check if it supports WS-Trust negotiation.
	* ChannelListenerBase.cs :
	  removed extra TODO and field. Implemented GetProperty<T>().
	* Message.cs : In CreateMessage() for SOAP Fault, create
	  SimpleMessage with IsFault = true.

2007-03-07  Atsushi Enomoto  <[email protected]>

	* SecurityRequestContext.cs : try to reply fault with the inner
	  channel when an error occurred internally.
	* FaultConverter.cs : implemented based on OperationContext (at normal
	  state it does not seem to create messages, so I implemented it this
	  way).

2007-03-07  Atsushi Enomoto  <[email protected]>

	* TransportBindingElement.cs : implemented GetProperty<T>().
	* TransactionFlowBindingElement.cs : on building factory or listener,
	  reject channel types that cannot build.
	* SecurityBindingElement.cs : added some TODO comments.
	* HttpTransportBindingElement.cs : GetProperty<T>() should rather
	  delegate to base, not BindingContext.
	* SecurityRequestContext.cs : somewhat late decryption.

2007-03-06  Atsushi Enomoto  <[email protected]>

	* MessageSecurityBindingSupport.cs,
	  AsymmetricSecurityBindingElement.cs,
	  SymmetricSecurityBindingElement.cs :
	  renamed *SecurityBindingElementSupport to *SecurityCapabilities and
	  implemented ISecurityCapabilities on them. Now those binding
	  elements support GetProperty<ISecurityCapabilities>().

2007-03-05  Atsushi Enomoto  <[email protected]>

	* SecurityBindingElement.cs : SetIssuerBindingContextIfRequired()
	  will work only for predefined parameter types.

2007-03-01  Atsushi Enomoto  <[email protected]>

	* MessageSecurityBindingSupport.cs :
	  Set proper MessageDirection to the requirement after creation.
	  split CreateTokenAuthenticator() as MessageDirection is different.
	  Removed extra creation of requirement.

2007-03-01  Atsushi Enomoto  <[email protected]>

	* MessageSecurityBindingSupport.cs : token authenticator is not
	  always created on channel-opening stage.
	* SecurityBindingElement.cs : use SslSecurityTokenParameters for
	  Sslnego binding factory method.

2007-02-28  Atsushi Enomoto  <[email protected]>

	* SecureMessageGenerator.cs : inconsistent ReferenceList has caused
	  signature velification failure.

2007-02-27  Atsushi Enomoto  <[email protected]>

	* SecureMessageGenerator.cs : encrypt signature confirmations only
	  when they are required.

2007-02-27  Atsushi Enomoto  <[email protected]>

	* SecureMessageGenerator.cs : SignatureConfirmation must be encrypted
	  when [Signature Protection is true i.e. when we use
	  SignBeforeEncryptAndEncryptSignature.

	  With this change finally samplesvc.cs/samplecli.cs became
	  interoperable(!)

2007-02-27  Atsushi Enomoto  <[email protected]>

	* SecureMessageDecryptor.cs : signature verification was not done
	  for endorsing supporting tokens.
	* SecureMessageGenerator.cs : moved SignatureConfirmation position
	  in the security header. Don't output empty ReferenceList.

2007-02-27  Atsushi Enomoto  <[email protected]>

	* SecureMessageGenerator.cs : signingToken was added before being
	  initialized and thus caused NRE.

2007-02-27  Atsushi Enomoto  <[email protected]>

	* WSSecurityMessageHeader.cs, SecureMessageDecryptor.cs,
	  SecureMessageGenerator.cs : use SHA1 instead of HMACSHA1. Now we
	  don't need workaround for symmetric key restoration.

2007-02-27  Atsushi Enomoto  <[email protected]>

	* WSSecurityMessageHeader.cs, SecureMessageDecryptor.cs,
	  SecureMessageGenerator.cs :
	  Avoid extra reference search from the request's ReferenceList.
	  create HMACSHA1 always with the key to compute hash (I'm not sure
	  it is correct; it is rather to adjust all hash consistent.)

2007-02-27  Atsushi Enomoto  <[email protected]>

	* SecureMessageDecryptor.cs : verify that endorsing supporting tokens
	  actually endorsed the primary signature.
	* SecureMessageGenerator.cs : implemented endorsing of the primary
	  signature. So, now supporting tokens are fully implemented.

2007-02-27  Atsushi Enomoto  <[email protected]>

	* MessageSecurityBindingSupport.cs : so, those supporting tokens are
	  totally signing tokens.
	* SecureMessageGenerator.cs : Endorsing tokens should also be
	  included in the message. They are just not signed.

2007-02-26  Atsushi Enomoto  <[email protected]>

	* SecureMessageGenerator.cs : support signing and encryption of
	  supporting tokens. Some required refactory to do it.
	* MessageSecurityBindingSupport.cs : added EncryptedData member.

2007-02-26  Atsushi Enomoto  <[email protected]>

	* SecureMessageDecryptor.cs : fix exception message.
	* WSSecurityMessageHeader.cs, WSSignedXml.cs, WSEncryptedXml.cs :
	  XmlNamespaceManager is not required for GetIdElement().

2007-02-22  Atsushi Enomoto  <[email protected]>

	* SecureMessageDecryptor.cs, WSSecurityMessageHeader.cs :
	  moved decryption part from former file to latter file, to reuse
	  SignedXml instance (though now I doubt how it actually was good)
	  which in turn required to replace EncryptedData in
	  WSSecurityMessageHeader with decrypted one.
	* WSEncryptedXml.cs : similar to WSSignedXml.cs, to handle wsu:Id.

2007-02-21  Atsushi Enomoto  <[email protected]>

	* SecureMessageGenerator.cs : when we create DerivedKeyToken, those
	  EncryptedData should contain KeyInfo as it is not obvious which key
	  is used there. .net<->mono DerivedKeyToken introp is done.
	* SecureMessageDecryptor.cs : check derived key requirement.
	  Reduce dom-dependent parts.

2007-02-21  Atsushi Enomoto  <[email protected]>

	* WSSecurityMessageHeader.cs : ReferenceList needs to be bound to
	  the related DerivedKeyToken (if any).
	* SecureMessageGenerator.cs : largely done with DerivedKeyToken
	  support. Some refactoring to distinguish deried-token-related
	  variables.
	* SecureMessageDecryptor.cs : removed its own support for derived
	  key tokens. Now it fully works with DerivedKeySecurityToken.

2007-02-21  Atsushi Enomoto  <[email protected]>

	* WSSecurityMessageHeader.cs, SecureMessageDecryptor.cs,
	  SecureMessageDecryptor.cs :
	  Implemented increment token reading in o:Security, as
	  DerivedKeyToken could reference to existing wrapped key.
	  Removed WsscDerivedKeyToken and all relevant code.
	* SecureMessageGenerator.cs : replaced WsscDerivedKeyToken with
	  DerivedKeySecurityToken.

2007-02-16  Atsushi Enomoto  <[email protected]>

	* SecureMessageGenerator.cs : it was setting security tokens into
	  incorrect SecurityMessageProperty.
	  Use correct WrappedKeySecurityToken for EncryptedKeySHA1.
	  Now it uses SecurityRequestContext instead of just primary key.
	* SecureMessageDecryptor.cs : removed extra lines. Limit workarounds
	  to symmetric reply decryption, which is the only trouble case.
	  Do not create another SignedXml.
	* WSSecurityMessageHeader.cs : SignedXml processing changes above.

2007-02-15  Atsushi Enomoto  <[email protected]>

	* SecureMessageDecryptor.cs : Now it uses union token resolver and
	  the resolver works with in-progress token reading in o:Security.
	* WSSecurityMessageHeader.cs : now it does not read EncryptedKey
	  as EncryptedKeyIdentifierClause. It is rather a SecurityToken.
	* SecureMessageGenerator.cs : cosmetic refactoring.

2007-02-14  Atsushi Enomoto  <[email protected]>

	* WSSecurityMessageHeader.cs : read EncryptedKeyIdentifierClause
	  instead of EncryptedKey.

2007-02-13  Atsushi Enomoto  <[email protected]>

	* MessageSecurityBindingSupport.cs : SigningToken and EncryptionToken
	  should not be always prepared at channel Open(). It also caused
	  that extra token requirements.
	* SecureMessageGenerator.cs : use correct key clause for encryption.
	* SecureMessageDecryptor.cs : reduce extra key acquisition.

2007-02-06  Atsushi Enomoto  <[email protected]>

	* MessageSecurityBindingSupport.cs : added CreateTokenAuthenticator()
	  for supporting 'supporting tokens' .
	* SecureMessageGenerator.cs : Supporting token creation is done only
	  at initiator (not sure if it is supposed that, but for now it is).
	  Removed extraneous CollectSupportingTokens().
	* SecureMessageDecryptor.cs : implemented supporting token
	  authentication (partly). "Signed" supporting tokens are expected
	  to work fine.

2007-02-06  Atsushi Enomoto  <[email protected]>

	* SecureMessageGenerator.cs :
	  make SignBeforeEncryptAndEncryptSignature working.

2007-02-06  Atsushi Enomoto  <[email protected]>

	* SecureMessageGenerator.cs : EncryptedKeySHA1 needs key hash, not
	  the key itself. ProtectionToken is WrappedKey.
	* SecureMessageDecryptor.cs : now it is internal encrypted key clause,
	  not EncryptedKeyIdentifierClause which is not for embedded key.
	* MessageProperties.cs : Fixed copy direction in CopyProperties().

2007-02-05  Atsushi Enomoto  <[email protected]>

	* MessageSecurityBindingSupport.cs : added DefaultKeyWrapAlgorithm
	  to switch asymmetric and symmetric. Not used yet.
	* SecurityRequestChannel.cs : now it pass the request security
	  property to reply receiver so that it could use the primary key
	  used at request phase.
	* SecurityRequestContext.cs : now it pass the context itself to
	  reply sender so that it could embed related MessageID.
	* SecureMessageGenerator.cs : ongoing changes to support symmetric
	  binding element. Add RelatesTo output and remove MessageID when
	  replying to the sender. Added some hacks to get symmetric binding
	  (kind of) working.
	* SecureMessageDecryptor.cs : ditto. Handle embedded encryption key
	  in SecurityTokenReference (it also involved existing encrypted key 
	  retrieval). In reply receiver, reuse the key that was used at
	  request phase. It needs significant token resolution refactoring.

2007-02-02  Atsushi Enomoto  <[email protected]>

	* MessageSecurityBindingSupport.cs : cosmetic refactoring.
	* SecureMessageDecryptor.cs : store token and its authentication
	  policies into the security property, and reuse it on reply.
	  Some code refactoring; there is at most one o:Security to solve at
	  one endpoint (depends on Actor). Some attempt to use correct
	  token parameters (but for now I have only samples that use x509).
	* SecureMessageGenerator.cs : For replying message, use initiator's
	  signing token as the encryption token. Simply reuse security
	  property from the input message.

	  I have some nasty workaround at decryptor for initiator that could
	  not retrieve decryption key.

2007-02-02  Atsushi Enomoto  <[email protected]>

	* SecureMessageGenerator.cs, SecurityChannelListener.cs,
	  SecurityRequestContext.cs, MessageSecurityBindingSupport.cs:
	  several refactoring on token acquisition. Large part of
	  MessageSecurityBindingSupport code is unified.

2007-02-02  Atsushi Enomoto  <[email protected]>

	* MessageProperties.cs : Security property should be one of the items.
	  Actually many other properties should be similar as well.
	* MessageImpl.cs, MessageBufferImpl.cs, Message.cs :
	  when copying a message, copy properties as well.
	* SecurityRequestContext.cs : on replying, pass input 
	  SecurityMessageProperty to the security generator.
	* SecureMessageGenerator.cs : both of above, for SignatureConfirmation
	  support.
	* WSSecurityMessageHeader.cs : fixed lazy .ctor() that did nothing.

2007-02-01  Atsushi Enomoto  <[email protected]>

	* WSSignedXml.cs:
	  MessageHeader.cs, Message.cs, WSSecurityMessageHeader.cs,
	  SecureMessageDecryptor.cs, SecureMessageGenerator.cs:
	  use new WSSignedXml instead of SignedXml, and remove coexisting
	  Id and wsu:Id. Now we can live only with wsu:Id and therefore
	  - our reply messages could be consumed by .NET, and
	  - .NET signature could be verified.

2007-02-01  Atsushi Enomoto  <[email protected]>

	* SecureMessageDecryptor.cs : The signing key must be passed as
	  CheckSignature() argument, not SigningKey.

2007-01-31  Atsushi Enomoto  <[email protected]>

	* MessageImpl.cs : don't read attribute after ReadStartElement().

2007-01-31  Atsushi Enomoto  <[email protected]>

	* MessageSecurityBindingSupport.cs : some Release() refactoring.
	* SecureMessageGenerator.cs : use correct signing key clause for
	  SecurityTokenReferenceKeyInfo to be serialized.
	* SecureMessageDecryptor.cs : now it can try to parse signature.

2007-01-31  Atsushi Enomoto  <[email protected]>

	Ongoing changes to support signature confirmation
	* SecureMessageGenerator.cs :
	  Don't output ReplyTo onto reply message.
	  Write SignatureConfirmation if needed.
	* SecureMessageDecryptor.cs :
	  Some refactoring for header cunsumption. Added commented-out
	  signature verification part (not working yet, on client side due
	  to incorrect reply from service and insufficient clause reader).
	* WSSecurityMessageHeader.cs :
	  Added SignatureConfirmation support.
	  KeyInfoClause for o:SecurityTokenReference should be replaced with
	  SecurityTokenReferenceKeyInfo.

2007-01-29  Atsushi Enomoto  <[email protected]>

	* SecureMessageGenerator.cs : support Timestamp signature.
	  Removed unused code, and extra argument in CreateReference().
	* WSSecurityMessageHeader.cs : Timestamp also needs Id for SignedXml.

2007-01-29  Atsushi Enomoto  <[email protected]>

	* SecureMessageGenerator.cs :
	  Several fixes to make asymmetric binding working:
	  - Differentiate signing and encryption token in several areas.
	  - Fixed signing keyinfo.
	  Use SenderIdPrefix.
	  Added initial SecurityMessageProperty handling, not sure if it is
	  appropriate here though.
	* HttpRequestChannel.cs : (some debugging lines)

2007-01-26  Atsushi Enomoto  <[email protected]>

	Woohoo! Here is a very basic WS-Security compliant message which could
	be allowed by Indigo.
	* MessageHeader.cs : added Id support for writing.
	* Message.cs : added internal BodyId for signature reference.
	* MessageImpl.cs : write Body Id if required.
	* SecureMessageGenerator.cs : Before signing, the target elements must
	  be given wsu:Id. Since I still use System.Security.dll, I need some
	  trick for signing (I give both Id and wsu:Id, former to sign and
	  latter to be consumed). Maybe I will have to replace xmldsig/xmlenc
	  implementation later. Now singning mechanism works except for
	  wsu:Timestamp (which is kind of mandatory).

	I can's still consume replies from Indigo but it's a big progress :)

2007-01-26  Atsushi Enomoto  <[email protected]>

	* MessageHeaderInfo.cs : added internal Id.
	* MessageHeader.cs : read and write wsu:Id.
	* Message.cs : output wsu namespace if Id exists in any header.
	* HttpReplyChannel.cs : (some debugging lines.)
	* SecureMessageDecryptor.cs : (remove debugging lines.)
	* MessageImpl.cs : removed obsolete code.
	* WSSecurityMessageHeader.cs : output "o" prefix.
	* SecureMessageGenerator.cs : replaced XmlElement-based header
	  signing with MessageHeader-based signing, to support Id correctly.

2007-01-15  Atsushi Enomoto  <[email protected]>

	* SecureMessageGenerator.cs : some more refactoring and code comments.
	* MessageSecurityUtility.cs : made decryptor into an instance class,
	  like I've done for SecureMessageGenerator.
	* SecurityRequestContext.cs, SecurityRequestChannel.cs :
	  dependent changes for above.

2007-01-12  Atsushi Enomoto  <[email protected]>

	* SecureMessageGenerator.cs : fixed derived keysize. derived key was
	  causing NRE due to the lack of token reference.
	  No need to pass doc to SignedXml.ctor() anymore.
	  Moved ReferenceList before the signature(s).

2007-01-12  Atsushi Enomoto  <[email protected]>

	* SecureMessageGenerator.cs : add wsu:Timestamp to signing target.
	  Moved signing key generation code to non-HMACSHA1 signing part.
	  Don't try to sign wss:Security.
	  Pass document itself to SignedXml.ctor().
	  Use temporary DataObjects to avoid adding Ids (not sure what is the
	  expected processing yet).
	* WSSecurityMessageHeader.cs : to support timestamp signing, add
	  WriteTo() method in WsuTimestamp.

2007-01-12  Atsushi Enomoto  <[email protected]>

	* SecureMessageGenerator.cs : wrong key was used for signing.
	  Omit KeyInfo for now - it seems that .net (sometimes?) omits it.

2007-01-11  Atsushi Enomoto  <[email protected]>

	* SecureMessageGenerator.cs :
	  Now ID generation process does not modify input message.
	  Moved derived key generation part into (virtual) signing loop.
	  MessagePartSpecification support for signing is done.

2007-01-11  Atsushi Enomoto  <[email protected]>

	* SecureMessageGenerator.cs : some reordering to handle signing and
	  encryption with supporting tokens. Fixed XPath query bug for
	  soap header contents (we want s:Header/*, not s:Header).

2007-01-11  Atsushi Enomoto  <[email protected]>

	* MessageSecurityBindingSupport.cs : more refactoring.
	  Made it abstract and added Initiator- and Recipient- classes.
	  Several members were moved to those derived types.
	* AsymmetricSecurityBindingElement.cs, 
	  SymmetricSecurityBindingElement.cs
	  SecurityChannelFactory.cs, SecurityChannelListener.cs,
	  SecurityRequestChannel.cs, SecurityOutputChannel.cs,
	  SecurityRequestContext.cs, SecureMessageGenerator.cs :
	  All dependent changes by above. Removed ISecurityChannelSource
	  which became useless.

2007-01-11  Atsushi Enomoto  <[email protected]>

	* SecureMessageGenerator.cs : encryption parts should exist too.
	* AsymmetricSecurityBindingElement.cs
	  SymmetricSecurityBindingElement.cs,
	  MessageSecurityBindingSupport.cs : some refactoring.
	  Split MessageSecurityBindingSupport into security binding element
	  specific parts and made MessageSecurityBindingSupport concrete.
	  It is likely split again, next time based on initiator/recipient.

2007-01-11  Atsushi Enomoto  <[email protected]>

	* MessageSecurityUtility.cs, SecureMessageGenerator.cs :
	  split encryptor part in the former file into latter file, and
	  make it nonstatic.
	* SecurityRequestChannel.cs, SecurityOutputChannel.cs,
	  SecurityRequestContext.cs : apply the change above.

2007-01-11  Atsushi Enomoto  <[email protected]>

	* MessageSecurityBindingSupport.cs :
	  Fixed incorrect TrgGetValue() use.
	  Added CollectRecipientSupportingTokens().

2007-01-11  Atsushi Enomoto  <[email protected]>

	* MessageSecurityUtility.cs: acctually ReferenceList was inside
	  EncryptedKey. So, when a key itself is used to encrypt data,
	  ReferenceList is contained by itself.
	* MessageSecurityBindingSupport.cs :
	  added CollectInitiatorSupportingTokens().

2007-01-10  Atsushi Enomoto  <[email protected]>

	* MessageSecurityUtility.cs: it should support ReferenceList-less
	  messages.

2007-01-10  Atsushi Enomoto  <[email protected]>

	* WSSecurityMessageHeader.cs : reverted previous unnecessary change.
	* MessageSecurityUtility.cs : there already was uuid.

2007-01-09  Atsushi Enomoto  <[email protected]>

	* MessageSecurityUtility.cs : replaced EncryptedKey with
	  WrappedKeySecurityToken, which seems to be in actual use in .net.
	* WSSecurityMessageHeader.cs : added internal Guid so that it
	  could be shared between header items.

2006-12-14  Atsushi Enomoto  <[email protected]>

	* HttpRequestContext.cs, TextMessageEncoder.cs :
	  some null arg check.

2006-12-08  Atsushi Enomoto  <[email protected]>

	* MessageSecurityUtility.cs : reducing DOM dependency. Use KeyInfoNode
	  for SecurityTokenReference resolution.

2006-12-08  Atsushi Enomoto  <[email protected]>

	* MessageSecurityUtility.cs : fixed EncryptedData decryption to
	  consider DerivedKeyTokens correctly.
	  When creating LocalId, don't add '#' here.

2006-12-07  Atsushi Enomoto  <[email protected]>

	* MessageSecurityUtility.cs :
	  handle key mapping for each wsse:Security.

2006-12-07  Atsushi Enomoto  <[email protected]>

	* WSSecurityMessageHeader.cs : use prefix "c" for ws-secureconv.

2006-12-06  Atsushi Enomoto  <[email protected]>

	* WSSecurityMessageHeader.cs : write top-level ReferenceList in
	  wsse:Security.
	* MessageSecurityUtility.cs :
	  Now ReferenceList is placed under wsse:Security as WS-Security 1.1 
	  suggests, and it is used to dereference decryption targets.
	  Now it premises multiple wsse:Security elements to read.

2006-12-06  Atsushi Enomoto  <[email protected]>

	* WSSecurityMessageHeader.cs : don't write o:SecurityTokenReference
	  manually (and actually the namespace URI was wrong).

2006-12-06  Atsushi Enomoto  <[email protected]>

	* WSSecurityMessageHeader.cs : improved DerivedKeyToken writing
	  and reading.
	* MessageSecurityUtility.cs : DerivedKeyToken creation.

2006-12-06  Atsushi Enomoto  <[email protected]>

	* SecurityBindingElement.cs,
	  SymmetricSecurityBindingElement.cs,
	  AsymmetricSecurityBindingElement.cs :
	  implemented SetKeyDerivation().

2006-12-06  Atsushi Enomoto  <[email protected]>

	* MessageSecurityUtility.cs : don't add KeyInfoClause to EncryptedKey
	  more than once.

2006-12-06  Atsushi Enomoto  <[email protected]>

	* MessageBufferImpl.cs : XmlReader-based buffer is not possible, so
	  don't use it.

2006-12-05  Atsushi Enomoto  <[email protected]>

	* MessageSecurityUtility.cs : u:Timestamp will be encrypted/signed,
	  thus move it in front of encryption/signing.

2006-12-04  Atsushi Enomoto  <[email protected]>

	* TransactionFlowBindingElement.cs : OnOpen()/OnClose() should not
	  check state by themselves (btw it's not really working).
	* HttpChannelListener.cs : If the url does not end with '/' add it
	  so that it could be fed to HttpListener.

2006-12-04  Atsushi Enomoto  <[email protected]>

	* HttpChannelFactory.cs : check scheme on CreateChannel.
	* MessageHeader.cs : finish IsMessageVersionSupported().

2006-12-04  Atsushi Enomoto  <[email protected]>

	* FaultConverter.cs : new file, not used yet though.

2006-10-21  Atsushi Enomoto  <[email protected]>

	* SvcHttpHandler.cs : set GET URL to ServiceMetadataBehavior.

2006-10-20  Atsushi Enomoto  <[email protected]>

	* SvcHttpHandler.cs : once AspNetReplyChannel get working with HTTP
	  GET as well as HttpReplyChannel, configuration would be ready now.

2006-10-18  Ankit Jain  <[email protected]>

	* TextMessageEncoder.cs (MediaType): Use 'application/soap+xml' for
	EnvelopeVersion.Soap12 and 'text/xml' for others.
	* HttpReplyChannel.cs (TryReceiveRequest): Revert earlier patch for GET
	handling.
	Strip '?' from the query string.

2006-10-13  Ankit Jain  <[email protected]>

	* MessageVersion.cs (None): Set AddressingVersion.None

2006-10-12  Atsushi Enomoto  <[email protected]>

	* SvcHttpHandler.cs : added config-based endpoint addition code.
	  Though due to some weird bug in mono-core it does not seem to work,
	  so commented out for now.
	* HttpReplyChannel.cs : handle wsdl query parameter. btw creating
	  mex request message might just be wrong.
	  Use expected MessageVersion by the channel.
	* AspNetReplyChannel.cs : ditto. Plus, HTTP GET support.

2006-10-12  Atsushi Enomoto  <[email protected]>

	* MessageSecurityBindingSupport.cs : added DefaultSignatureAlgorithm
	  which differs depending on whether it is asymmetric or symmetric.
	* SecurityRequestChannel.cs, SecurityRequestContext.cs :
	  simplify SecureMessage() and DecryptMessage() arguments (just
	  take MessageSecurityBindingSupport instead of several parameters).
	* MessageSecurityUtility.cs :
	  - simplify SecureMessage() and DecryptMessage() arguments (just
	    take MessageSecurityBindingSupport instead of several parameters).
	  - Take token inclusion mode into account. Don't include them when
	    it is not expected. Also, change the token reference style.
	  - add wsa:MessageID to the headers.
	  - For hmac-sha1 signing (default for symmetric binding), use
	    symmetric key created for encryption as well to create HMACSHA1.
	  - add Id to wsu:Timestamp.
	  - start to handle SecurityMessageProperty.
	* WSSecurityMessageHeader.cs :
	  Added Id to WsuTimestamp. Also use prefixes for its XML output.
	  Changed date format.

2006-10-06  Atsushi Enomoto  <[email protected]>

	* CommunicationObject.cs : reject faulted state on Open()/Close().
	* MessageHeaders.cs : removed extra fields.

2006-10-06  Ankit Jain  <[email protected]>

	* HttpReplyChannel.cs (TryReceiveRequest): Handle HTTP GET.

2006-10-05  Atsushi Enomoto  <[email protected]>

	* MessageSecurityUtility.cs, SecurityRequestContext.cs :
	  added some FIXMEs and additional arg.

2006-10-05  Atsushi Enomoto  <[email protected]>

	* MessageSecurityUtility.cs : remove duplicate Action header.

2006-10-05  Atsushi Enomoto  <[email protected]>

	* MessageFault.cs : partly implemented CreateFault(Message, int).
	* Message.cs, MessageImpl.cs, MessageBufferImpl.cs :
	  handle IsFault correctly in each implementation.

2006-10-04  Ankit Jain  <[email protected]>

	* HttpRequestChannel.cs (ProcessRequest): Read till the end.

2006-10-04  Ankit Jain  <[email protected]>

	* HttpRequestChannel.cs (ProcessRequest): Temporary workaround for a bug
	in WebConnectionStream.

2006-10-04  Ankit Jain  <[email protected]>

	* MessageHeaders.cs (To): Use GetHeader<string> till
	DataContractSerializer gets ISerializable support.
	* CustomBinding.cs (.ctor): Get scheme from TransportBindingElement.

2006-10-04  Ankit Jain  <[email protected]>

	* ServiceHostParser.cs (Parse):
	(Split): Add some error checks.

2006-10-03  Atsushi Enomoto  <[email protected]>

	* SslStreamSecurityBindingElement.cs : updated API to Sep. CTP.
	* StreamUpgradeAcceptor.cs : Fix AcceptUpgrade().
	* SslStreamSecurityUpgradeProvider.cs,
	  SslStreamSecurityUpgradeAcceptor.cs :
	  new files for Ssl upgrade provider implementation.
	* MessageSecurityUtility.cs :
	  Create proper C14NTransform. Don't use enveloped signature
	  transform but sign every significant bits. On securing messages
	  use ChannelProtectionRequirements.
	* SecurityRequestContext.cs : pass ChannelProtectionRequirements to
	  SecureMessage().
	* MessageEncoder.cs : fix API (missing constraint).
	* WSSecurityMessageHeader.cs : it is MustUnderstand.
	* StreamUpgradeProvider.cs : API fix and implemented .ctor().
	* AsymmetricSecurityBindingElement.cs : default protection order is
	  SignBeforeEncryptAndEncryptSignature.

2006-09-29  Ankit Jain  <[email protected]>

	* SvcHttpHandlerFactory.cs (GetTypeFromSvc): Extract and move code to
	ServicHostParser and use that here.
	(PrivateBinPath): New.
	(GetTypeFromBin): New. Load assembly from PrivateBinPath.
	(RemovedCallback): Remove and close the SvcHttpHandler when its
	corresponding file (.svc) changes.
	* SvcHttpHandler.cs (Close): New. Close the ServiceHost.

	* ServiceHostParser.cs : New.
	* CachingCompiler.cs : New. Code extracted from
	System.Web.Compilation.CachingCompiler
	* CompilationException.cs : New. From System.Web.Compilation
	* HtmlizedException.cs : New. Likewise.

2006-09-29  Atsushi Enomoto  <[email protected]>

	* MessageSecurityBindingSupport.cs : For client side, it is always
	  InitiatorServiceModelSecurityTokenRequirement which should be
	  created. Fixed wrong client encryption key acquisition.

2006-09-29  Atsushi Enomoto  <[email protected]>

	* SecurityChannelListener.cs, SecurityRequestContext.cs,
	  MessageSecurityBindingSupport.cs : made similar changes as factories
	  to listener so that session channels and input channels would work.
	  Added authenticator creation.

2006-09-29  Atsushi Enomoto  <[email protected]>

	* Binding.cs : added missing members.

2006-09-28  Atsushi Enomoto  <[email protected]>

	* SecurityRequestChannel.cs, SecurityOutputChannel.cs,
	  MessageSecurityUtility.cs, MessageSecurityBindingSupport.cs :
	  reduce code duplication between request and output channels.
	  The common parts are now in MessageSecurityBindingSupport.
	  Now reduced several arguments in SecureMessage() for client.

2006-09-28  Atsushi Enomoto  <[email protected]>

	* ChannelFactoryBase.cs : implemented ValidateCreateChannel().

2006-09-28  Atsushi Enomoto  <[email protected]>

	* AsymmetricSecurityBindingElement.cs,
	  SecurityChannelListener.cs,
	  SecurityRequestContext.cs,
	  SymmetricSecurityBindingElement.cs,
	  SecurityRequestChannel.cs,
	  SecurityOutputChannel.cs,
	  SecurityChannelFactory.cs,
	  MessageSecurityBindingSupport.cs : 1) Refactoring. 
	  IMessageSecurityBindingSupport now becomes a class and contains
	  all the members which resided in ISecurityChannelSource.
	  Now it takes more constructor params.
	  Made dependent changes on all sources above.

	  2) Added SecurityTokenAuthenticator creation in
	  SecurityRequestChannel (SecurityOutputChannel should do the same).

2006-09-27  Atsushi Enomoto  <[email protected]>

	* SecurityRequestChannel.cs : ongoing improvements on conditional
	  key creation. Actually there must be some part that creates an
	  authenticator (WinFX does that).

2006-09-27  Ankit Jain  <[email protected]>

	Add suport for handling .svc files.
	* SvcHttpHandlerFactory.cs: New.
	* SvcHttpHandler.cs: New.

	* HttpChannelListener.cs (PopulateChannel): Use AspNetReplyChannel if in
	asp.net environment.
	(OnOpen): Do nothing in asp.net environment.
	(OnClose): Likewise.
	* HttpReplyChannel.cs (HttpRequestContext): Move to ..
	* HttpRequestContext.cs: .. here.

	* AspNetReplyChannel.cs: New.
	* AspNetRequestContext.cs: New.

2006-09-26  Atsushi Enomoto  <[email protected]>

	* MessageSecurityUtility.cs :
	  Significantly rewritten decryption parts to respect ReferenceList
	  to decrypt (so no workaround anymore).
	  Now e:ReferenceList inside o:Security is treated as the referenced
	  EncryptedType items are encrypted by 1) the derived key which is
	  immediately in front of it, or 2) the default key (it is according
	  to WS-SecureConversation section 9.1). Thus removed immediately
	  previous hack to auto-fill wsu:Id attributes.

	  On securing a message, generate correct Id and add DataReference
	  to ReferenceList properly.

2006-09-26  Atsushi Enomoto  <[email protected]>

	* WSSecurityMessageHeader.cs : handle ReferenceList. It is being
	  practically used.

2006-09-26  Atsushi Enomoto  <[email protected]>

	* WSSecurityMessageHeader.cs : handle DerivedKeyToken as a header content.
	  Actually WSSecurityTokenSerializer should be able to consume it, but after
	  spending a lot of time I still cannot successfully read it on WinFX.
	  Skip ReferenceList for now.
	* MessageSecurityUtility.cs :
	  Replaced some string literals with constants.
	  Added some workaround for DerivedKeyToken retrieval.
	  WinFX somehow sends incomplete ISO10126 padding which contains
	  bigger number than the key size and is rejected by EncryptedXml,
	  so added DecryptLax() which processes such ones in PaddingMode.None
	  to workaround it (only for cross-connection between mono and winfx).
	  Added some incomplete implicit wsu:Id processing.
	  Don't try to replace SignedXml with EncryptedData. It is not added
	  to the document tree.

2006-09-25  Atsushi Enomoto  <[email protected]>

	* MessageSecurityUtility.cs : support message signature encryption. Some
	  more refactoring.

2006-09-22  Atsushi Enomoto  <[email protected]>

	* SecurityBindingElement.cs : implement Clone(). Remove some MonoTODOs.

2006-09-22  Atsushi Enomoto  <[email protected]>

	* MessageSecurityUtility.cs : fix warnings.

2006-09-22  Atsushi Enomoto  <[email protected]>

	* MessageSecurityUtility.cs : actually there would be more than one
	  EncryptedData. Decrypt all.

2006-09-22  Atsushi Enomoto  <[email protected]>

	* MessageSecurityUtility.cs : supply correct URIs in SecureMessage().
	  Use ISO10126 padding mode (it is not required but in manner).

2006-09-21  Atsushi Enomoto  <[email protected]>

	* MessageSecurityUtility.cs : now that EncryptedXml decryption bug is
	  fixed, remove 16 bytes workaround (we still need encryption bugfix in
	  that class to make it work fine with mono client).
	  Removed buggy lines that reset decryption key to AES.
	  Modified GetKey() argument to take EncryptedData/EncryptedKey element.
	* WSSecurityMessageHeader.cs :
	  (SecurityTokenReferenceKeyInfo) support LoadXml.

2006-09-20  Atsushi Enomoto  <[email protected]>

	* TransactionMessageProperty.cs : new file.

2006-09-20  Atsushi Enomoto  <[email protected]>

	* ChannelPoolSettings.cs, OneWayBindingElement.cs : build fix, as
	  gmcs happened to report wrong code.

2006-09-19  Atsushi Enomoto  <[email protected]>

	* SecurityChannelFactory.cs, SecurityChannelListener.cs :
	  .ctor() now requires ChannelProtectionRequirements which will be
	  supplied via BindingParameterCollection.
	* SymmetricSecurityBindingElement.cs,
	  AsymmetricSecurityBindingElement.cs : thus add
	  ChannelProtectionRequirement parameter to factory/listener.
	* SecurityRequestChannel.cs : use recipient token requirement to
	  create an encryption token. Thus differentiate the logic from
	  signing (initiator) token.

2006-09-19  Atsushi Enomoto  <[email protected]>

	* SymmetricSecurityChannelFactory.cs, SecurityChannelFactory.cs :
	  renamed former to latter.
	* SymmetricSecurityChannelListener.cs, SecurityChannelListener.cs :
	  ditto.

2006-09-19  Atsushi Enomoto  <[email protected]>

	* MessageSecurityBindingSupport.cs : new internal types to commonize
	  AsymmetricSecurityBindingElement and SymmetricSecurityBindingElement
	  and thus make internal factory and listener reusable.
	* SymmetricSecurityChannelFactory.cs, SecurityRequestContext.cs,
	  SecurityRequestChannel.cs, SecurityOutputChannel.cs,
	  SymmetricSecurityChannelListener.cs : rewrote dependent parts on
	  SymmetricSecurityBindingElement, using the new types above.
	* SymmetricSecurityBindingElement.cs :
	  Use SymmetricMessageSecurityBindingSupport.
	* AsymmetricSecurityBindingElement.cs :
	  thus implemented, using AsymmetricMessageSecurityBindingSupport.

2006-09-19  Atsushi Enomoto  <[email protected]>

	* ChannelFactoryBase.cs : more RC1 update.

2006-09-19  Atsushi Enomoto  <[email protected]>

	* MessageEncoder.cs, BinaryMessageEncoder.cs, MtomMessageEncoder.cs,
	  TextMessageEncoder.cs : updated ReadMessage() API to RC1.
	* ChannelListenerBase.cs, ChannelListenerBase_1.cs,
	  ChannelBase.cs : RC1 API updates.
	* MessageImpl.cs : implemented Properties.
	* HttpReplyChannel.cs : added HttpRequestMessageProperty support.

2006-09-18  Ankit Jain  <[email protected]>

	* MessageHeaders.cs (MessageId):
	(RelatesTo): UniqueId is not serializable, serialize it as a string.

2006-09-17  Atsushi Enomoto  <[email protected]>

	* ChannelParameterCollection.cs : new file.
	* LayeredOutputChannel.cs, SecurityOutputChannel.cs :
	  new files for IOutputChannel implementation.
	* OneWayBindingElement.cs : hacky implementation.
	* SymmetricSecurityChannelFactory.cs : support IOutputChannel.
	* MessageSecurityUtility.cs : now create identifier from the security
	  token and the token parameters which is added as an argument.
	* SecurityRequestContext.cs,
	  SecurityRequestChannel.cs : SecureMessage() argument changes.
	  Set MessageSecurityVersion (SecurityTokenVersion) to the token
	  requirement.

2006-09-17  Atsushi Enomoto  <[email protected]>

	* HttpRequestChannel.cs : close the HttpWebRequest.

2006-09-17  Atsushi Enomoto  <[email protected]>

	* HttpRequestChannel.cs,
	  HttpChannelFactory.cs : implement async request/reply.
	* HttpChannelFactory.cs :
	  verify factory state when creating a channel.

2006-09-17  Atsushi Enomoto  <[email protected]>

	* MessageEncoder.cs, TextMessageEncoder.cs, MtomMessageEncoder.cs,
	  BinaryMessageEncoder.cs : added message version mismatch check.

2006-09-15  Atsushi Enomoto  <[email protected]>

	* SymmetricSecurityChannelListener.cs, SecurityRequestContext.cs :
	  Making incomplete changes to handle different tokens for encryption
	  and signature.
	* SymmetricSecurityChannelFactory.cs, SecurityRequestChannel.cs :
	  split channel implementation classes out to the latter file.
	* MessageSecurityUtility.cs : seems like there is
	  TimeStampValidityDuration property, so use it (incomplete; a server
	  needs another love).

2006-09-12  Atsushi Enomoto  <[email protected]>

	* MessageSecurityUtility.cs, SymmetricSecurityChannelFactory.cs,
	  SecurityRequestContext.cs : now that we have key identifier clause
	  and working ResolveKeyIdentifierClause(), just create keys inside
	  SecureMessage(). Add KeyInfo to the xmldsig.

2006-09-12  Atsushi Enomoto  <[email protected]>

	* SymmetricSecurityChannelFactory.cs, SecurityRequestContext.cs :
	  pass SecurityKeyIdentifierClause to SecureMessage().
	* SecurityBindingElement.cs : set X509ReferenceStyle as Thumbprint
	  for IssuedToken binding element.
	* SymmetricSecurityChannelListener.cs : removed hack to just create
	  X509 security token, and implemented correct token creation.
	* WSSecurityMessageHeader.cs : added new KeyInfoClause type that
	  wraps SecurityTokenReference element.
	* MessageSecurityUtility.cs : use the above.

2006-09-08  Atsushi Enomoto  <[email protected]>

	* MessageSecurityUtility.cs : raise MessageSecurityException when it
	  could not find a security header.
	* SymmetricSecurityChannelFactory.cs : now it also supports
	  IRequestSessionChannel. Extracted SecurityRequestChannel out from
	  the factory type.

2006-09-08  Atsushi Enomoto  <[email protected]>

	* SecurityRequestContext.cs : moved securing message part to
	  MessageSecurityUtility.cs.
	* MessageSecurityUtility.cs : the change above.
	  use DateTime.Now for timestamp basis. Don't append signature to
	  the document. Instead it is added to the header. Capture body
	  content instead of the body itself.
	* SymmetricSecurityChannelFactory.cs : decrypt reply message to
	  be processed by upper layers.

2006-09-08  Atsushi Enomoto  <[email protected]>

	* MessageSecurityUtility.cs, WSSecurityMessageHeader.cs,
	  SymmetricSecurityChannelListener.cs,
	  SymmetricSecurityChannelFactory.cs, SecurityRequestContext.cs :
	  more refactoring. Request serialization became much more conformant
	  and add required header items.
	  Security Token retrieval is needed to send it in the request.
	  Fixed wrong key encryption.

2006-09-07  Atsushi Enomoto  <[email protected]>

	* SecurityRequestContext.cs : the workaround was not functional.

2006-09-07  Atsushi Enomoto  <[email protected]>

	* SecurityRequestContext.cs : some more refactoring. Use EncryptedXml
	  API, especially ReplaceData(), instead of native crypto stuff.
	* WSSecurityMessageHeader.cs : handle dsig:Signature as well (for
	  MessageProtectionOrder.SignBeforeEncrypt).

2006-09-07  Atsushi Enomoto  <[email protected]>

	* SecurityRequestContext.cs : label should be combined of both
	  the client's and the server's.

2006-09-06  Atsushi Enomoto  <[email protected]>

	* SecurityRequestContext.cs : enable key derivation (though for now
	  GenerateDerivedKey() is unimplemented). Create meaningful,
	  decrypted request message to be consumed by the upper layer.

2006-09-06  Atsushi Enomoto  <[email protected]>

	* SecurityRequestContext.cs : implement Close() and Reply().
	  ongoing implementation of Reply(TimeSpan).
	* MessageSecurityUtility.cs : new file to collect utility methods.
	* SymmetricSecurityChannelFactory.cs : moved securing message code
	  to the above file.
	* SymmetricSecurityChannelListener.cs : tiny renaming.

2006-09-06  Atsushi Enomoto  <[email protected]>

	* SecurityRequestContext.cs : security header is also stored.
	  removed NotImpl.
	* WSSecurityMessageHeader.cs : read EncryptedKey and EncryptedData
	  as well.

2006-09-06  Atsushi Enomoto  <[email protected]>

	* SymmetricSecurityChannelFactory.cs : tiny progress on securing
	  message.

2006-09-05  Atsushi Enomoto  <[email protected]>

	* SymmetricSecurityChannelFactory.cs : specify KeyUsage.Exchange
	  so that it retrieves the security key in that manner.

2006-09-05  Atsushi Enomoto  <[email protected]>

	* Binding.cs : MessageVersion is null when there is no
	  MessageEncodingBindingElement.
	* Message.cs : null arg check.

2006-09-05  Atsushi Enomoto  <[email protected]>

	* ChannelPoolSettings.cs, OneWayBindingElement.cs : new files.

2006-09-04  Atsushi Enomoto  <[email protected]>

	* SymmetricSecurityChannelListener.cs, SecurityRequestContext.cs, 
	  LayeredReplyChannel.cs, LayeredCommunicationObject.cs,
	  LayeredRequestChannel.cs : some refactoring.
	* SymmetricSecurityChannelFactory.cs :
	  ongoing secure message creation implementation.

2006-09-01  Atsushi Enomoto  <[email protected]>

	* SymmetricSecurityBindingElement.cs :
	  pass specific ServiceCredentialsSecurityTokenManager type to
	  SymmetricSecurityChannelListener as it needs ServiceCertificate.
	* SymmetricSecurityChannelListener.cs :
	  get service certificate. It's a temporary hack.
	  Move RequestContext code to below.
	* SecurityRequestContext.cs : new file.
	* WSSecurityMessageHeader.cs : implementing Read(), but to finish
	  it I have to finish decryption of the incoming message.

2006-08-31  Atsushi Enomoto  <[email protected]>

	* MessageImpl.cs : don't write attributes on the first body content
	  element *on soap Body element*.
	* MessageBufferImpl.cs : don't throw ArgumentNullException.
	  ObjectDisposedException is appropriate.
	* MessageHeader.cs : (RawMessageHeader) don't write element itself
	  in OnWriteHeader*Contents*().

2006-08-31  Atsushi Enomoto  <[email protected]>

	* WSSecurityMessageHeader.cs : new file.
	* SymmetricSecurityChannelFactory.cs :
	  moved WSSecurityHeader and related types to the above.
	* SymmetricSecurityChannelListener.cs :
	  reject SOAP-env-less message.

2006-08-31  Atsushi Enomoto  <[email protected]>

	* SecurityChannelListener.cs, SymmetricSecurityChannelListener.cs :
	  renamed former to latter.
	* SymmetricSecurityChannelFactory.cs :
	  create requirements every time. It is also likely that I need
	  another requirement instance to get service credentials here.

2006-08-30  Atsushi Enomoto  <[email protected]>

	* SymmetricSecurityBindingElement.cs : make BuildChannelListener()
	  similar to BuildChannelFactory() (set credentials, issuer binding
	  context etc.).
	* SecurityChannelListener.cs :
	  more ongoing security support implementation.
	* SymmetricSecurityChannelFactory.cs :
	  moved GetSecurityKey() to SymmetricSecurityRequestChannel.

2006-08-29  Atsushi Enomoto  <[email protected]>

	* SecurityChannelListener.cs, SymmetricSecurityBindingElement.cs :
	  Renamed SecurityChannelListener to SymmetricSecurityChannelListener.
	  Implementation is underway.
	* LayeredReplyChannel.cs :
	  like LayeredRequestChannel, use ChannelListenerBase to provide
	  default timeouts.

2006-08-29  Atsushi Enomoto  <[email protected]>

	* MessageHeader.cs : added another implementation type that uses
	  XmlElement, for buffering purpose.
	* MessageImpl.cs : Header item types are user-driven by
	  MessageHeader.GetHeader<T>(int), so at storing phase just store
	  nodes as XmlElement.
	* MessageHeaders.cs : avoid dumping XmlNode to string to create
	  another XmlReader.

2006-08-28  Atsushi Enomoto  <[email protected]>

	* SymmetricSecurityBindingElement.cs : find ClientCredentials from
	  BindingParameterCollection, not from binding element properties.

2006-08-28  Atsushi Enomoto  <[email protected]>

	* SecurityChannelFactory.cs, SymmetricSecurityChannelFactory.cs :
	  renamed former to latter.

2006-08-25  Atsushi Enomoto  <[email protected]>

	* SecurityBindingElement.cs : SetIssuerBindingContext should also
	  work for SslSecurityTokenParameters.

2006-08-24  Atsushi Enomoto  <[email protected]>

	* SecurityBindingElement.cs :
	  Added SetIssuerBindingContextIfRequired().
	* SecurityChannelFactory.cs :
	  Changed .ctor() arg again, just to receive binding element.
	* SymmetricSecurityBindingElement.cs :
	  Call SetIssuerBindingContextIfRequired() in BuildChannelFactory().
	  SymmetricSecurityChannelFactory .ctor() arg changes.
	  "ProtectionTokenParameters" is not passed now.

2006-08-23  Atsushi Enomoto  <[email protected]>

	* SymmetricSecurityBindingElement.cs : requirements should be
	  filled at InitializeSecurityTokenParameters as long as possible.
	  SymmetricSecurityChannelFactory<T> now does not receive
	  requirements (it now creates one inside it) at .ctor().
	* SecurityChannelFactory.cs : remove requirement argument.

2006-08-23  Atsushi Enomoto  <[email protected]>

	* SymmetricSecurityBindingElement.cs : implemented copy constructor.

2006-08-22  Atsushi Enomoto  <[email protected]>

	* SymmetricSecurityBindingElement.cs :
	  MessageSecurityVersion property is of type SecurityTokenVersion.
	* SecurityBindingElement.cs :
	  Implemented CreateSecureConversationBindingElement().
	  For CreateIssuedTokenBindingElement(), ProtectionTokenParameters is
	  the argument IssuedSecurityTokenParameters itself.

2006-08-22  Atsushi Enomoto  <[email protected]>

	* SymmetricSecurityBindingElement.cs :
	  CreateSecurityTokenManager() can be directly used now. 
	  Use CallInitializeSecurityTokenRequirement() to fill requirement
	  properties.

2006-08-16  Atsushi Enomoto  <[email protected]>

	* ChannelFactoryBase.cs : GetProperty() is virtual.

2006-08-14  Atsushi Enomoto  <[email protected]>

	* SymmetricSecurityBindingElement.cs : in BuildChannelFactory(),
	  create token manager, token parameters and token requirements,
	  and fill some requirements.
	* TransportBindingElement.cs, HttpTransportBindingElement.cs,
	  TextMessageEncodingBindingElement.cs : workaround to not throw NIE.
	* BindingContext.cs : implemented RemainingBindingElements.
	  kill "no remaining binding element" error in GetInnerProperty()
	* SecurityChannelFactory.cs : now it became 
	  SymmetricSecurityChannelFactory, thus soon to be renamed.
	  Several ongoing actual security resolution is on.

2006-08-11  Atsushi Enomoto  <[email protected]>

	* CommunicationObject.cs :
	  add GetCommunicationObjectType() and use it.
	* ChannelFactoryBase.cs, ChannelListenerBase_1.cs :
	  use ThrowIfDisposedOrNotOpen().
	* LayeredCommunicationObject.cs : have similar ThrowIf...() methods
	  to CommunicationObject. Make it IDisposable.
	* LayeredRequestChannel.cs : use above.
	* SecurityChannelFactory.cs : removed state check as it is done at
	  above class.

2006-08-10  Atsushi Enomoto  <[email protected]>

	* SecurityBindingElement.cs : (CanBuildChannelFactory and
	  CanBuildChannelListener) directly dispatch to BindingContext.
	* SymmetricSecurityBindingElement.cs : require protection token
	  parameters before building a channel or a listener.
	* ChannelFactoryBase.cs : raise an error when a channel is being
	  created without opening the factory.
	* ChannelListenerBase_1.cs : ditto for the listener.
	* SecurityChannelFactory.cs : before sending a request, it must be
	  opened.

2006-08-07  Atsushi Enomoto  <[email protected]>

	* MessageBufferImpl.cs : initialize fields.
	  workaround BufferSize just to return 0.
	* MessageImpl.cs : for BodyWriter, don't use DefaultMessageBuffer
	  which does not support multi time write.
	* Message.cs : implemented State.

2006-08-07  Atsushi Enomoto  <[email protected]>

	* Message.cs : OnGetBodyAttribute() cannot return anything unless it
	  is consuming XmlReader.
	  Implemented OnCreateBufferedCopy(), to return XPathMessageBuffer.
	* MessageBuffer.cs : implemented CreateNavigator().
	* MessageBufferImpl.cs : added XPathMessageBuffer class.

	I kinda know that MS heavily depends on binary XmlReader and may have
	XPathNavigator implementation based on the binary stuff, but at
	least for now we have almost no motivation to mimick it.

2006-08-07  Atsushi Enomoto  <[email protected]>

	* SecurityChannelFactory.cs : a bit more of security header code.

2006-08-04  Atsushi Enomoto  <[email protected]>

	* SymmetricSecurityBindingElement.cs :
	  set default MessageProtectionOrder in every construction.

2006-08-03  Atsushi Enomoto  <[email protected]>

	* LayeredRequestChannel.cs, SecurityChannelFactory.cs : 
	  changed to require ChannelFactoryBase to support default timeout.
	  Made some methods non-virtual. Preparing code to add security
	  headers (empty yet).
	* SecurityBindingElement.cs : implemented several factory methods
	  that return SymmetricSecurityBindingElement.

2006-08-02  Atsushi Enomoto  <[email protected]>

	* IStreamUpgradeBindingElement.cs,
	  StreamUpgradeBindingElement.cs : renamed from former to latter.

2006-08-02  Atsushi Enomoto  <[email protected]>

	* IStreamUpgradeBindingElement.cs : API update, soon to be renamed.

2006-07-31  Ankit Jain  <[email protected]>

	* MessageHeaders.cs (From): Use Constants.WSA1
	(MessageId): Implement the same pattern as other properties (From etc).

2006-07-28  Atsushi Enomoto  <[email protected]>

	* LocalClientSecuritySettings.cs : initialize IdentityVerifier as well.
	* SecurityBindingElement.cs : some cosmetic changes.

2006-07-28  Atsushi Enomoto  <[email protected]>

	* SecurityBindingElement.cs : LocalClientSettings and 
	  LocalServiceSettings returns an instance for each.
	* LocalClientSecuritySettings.cs : initialized fields.

2006-07-28  Atsushi Enomoto  <[email protected]>

	* LocalClientSecuritySettings.cs : moved from S.SM.Description, and
	  kinda implemented Clone() just with MemberwiseClone().

2006-07-27  Ankit Jain  <[email protected]>

	* MessageHeaders.cs (set_To): Use Uri.AbsoluteUri .
	* MessageHeader.cs (knownTypes): New. Known type array containing
	EndpointAddress10.
	(CreateHeader): Use knownTypes with the DataContractSerializer .ctor

2006-07-21  Atsushi Enomoto  <[email protected]>

	* LayeredRequestChannel.cs, LayeredReplyChannel.cs,
	  LayeredCommunicationObject.cs,
	  SecurityChannelFactory.cs, SecurityChannelListener.cs :
	  new files to support security channels, though right now they
	  just pass inner channels through.
	* SymmetricSecurityBindingElement.cs : use above.

2006-07-21  Atsushi Enomoto  <[email protected]>

	* AsymmetricSecurityBindingElement.cs,
	  SymmetricSecurityBindingElement.cs :
	  Default SecurityTokenParameters is null.

2006-07-20  Atsushi Enomoto  <[email protected]>

	* AsymmetricSecurityBindingElement.cs : remove NotImpl for now.

2006-07-20  Atsushi Enomoto  <[email protected]>

	* Message.cs : When EnvelopeVersion is None, don't write SOAP
	  envelope.
	* MessageHeader.cs : don't write headers when EnvelopeVersion is None.
	* MessageHeaders.cs : When EnvelopeVersion is None, don't output
	  headers. When AddressingVersion is None, don't output addressing
	  headers as well, except for Action which is still needed by
	  service dispatcher.

2006-07-20  Atsushi Enomoto  <[email protected]>

	* MessageHeaders.cs : changed specific properties to find it from
	  headers as Action property does (local variables won't be set by
	  setter). Cache serializers. Check null serializer arguments.
	  For EndpointAddress, GetHeader<T>() shouldn't use serializer.

2006-07-19  Atsushi Enomoto  <[email protected]>

	* MessageHeader.cs : WriteTo() should treat EndpointAddress to not
	  use XmlObjectSerializer (since it is not data contract type).

2006-07-18  Atsushi Enomoto  <[email protected]>

	* MessageImpl.cs : Improved ReadHeaders().
	  For certain header items, use EndpointAddress.ReadFrom().

2006-07-18  Atsushi Enomoto  <[email protected]>

	* AsymmetricSecurityBindingElement.cs :
	  it is not ISecurityCapabilities anymore.

2006-07-18  Atsushi Enomoto  <[email protected]>

	* MessageVersion.cs : added None.

2006-07-14  Atsushi Enomoto  <[email protected]>

	* Message.cs : GetReaderAtBodyContents() implementation using
	  writer methods.

2006-07-13  Atsushi Enomoto  <[email protected]>

	* Message.cs : CreateMessage(version,action,xmlReader) incorrectly
	  used MessageVersion.Default.

2006-07-12  Duncan Mak  <[email protected]>

	* MessageBuffer.cs (MessageContentType): Return
	"application/soap+msbin1".

	* MessageImpl.cs (EmptyMessage.OnCreateBufferedCopy):
	(SimpleMessage.OnCreateBufferedCopy):
	(XmlReaderMessage.OnCreateBufferedCopy): Hook up with the new
	MessageBuffer implementations.

	* MessageBufferImpl.cs: Concrete implmentations for MessageBuffer.
	(DefaultMessageBuffer): Used by EmptyMessage and SimpleMessage.
	(XmlReaderMessageBuffer): Used by XmlReaderMessage.

2006-07-12  Atsushi Enomoto  <[email protected]>

	* MessageImpl.cs : Action should be added in request messages. Omit
	  it only in reply message, thus moved to dispatcher logic.

2006-07-12  Ankit Jain  <[email protected]>

	* HttpRequestChannel.cs (HttpRequestChannel.Request): Workaround for a
	bug in WebConnectionStream.
	* MessageHeaders.cs (MessageHeaders.From):
	(MessageHeaders.ReplyTo):
	(MessageHeaders.To): Add the corresponding MessageHeader on set.

2006-07-11  Atsushi Enomoto  <[email protected]>

	* MessageImpl.cs : when AddressingVersion is None (e.g. POX), don't
	  add SOAP Action to the response at any time.

2006-07-10  Atsushi Enomoto  <[email protected]>

	* SymmetricSecurityBindingElement.cs,
	  SecurityBindingElement.cs : They are not ISecurityCapabilities now.
	  Implemented .ctor() and some properties.

2006-07-10  Atsushi Enomoto  <[email protected]>

	* TransactionFlowBindingElement.cs : new file.
	* HttpTransportBindingElement.cs : added missing KeepAliveEnabled.

2006-07-06  Atsushi Enomoto  <[email protected]>

	* MessageFault.cs :
	  DefaultAction vanished. CreateFault() now takes bufferSize arg.
	* MessageHeaders.cs : ArgumentException -> MessageHeaderException.
	* AddressingVersion.cs : added None. Equals() and GetHashCode()
	  vanished (there is anyways no way to instantiate this type).
	* MessageVersion.cs : added Soap11 and Soap12.
	* TextMessageEncoder.cs : silly quotation mark wrapper disappeared
	  in June CTP. goodie.

2006-07-05  Atsushi Enomoto  <[email protected]>

	* MtomMessageEncoder.cs, BinaryMessageEncoder.cs, Message.cs :
	  removed some vanished CreateMessage() overloads.

2006-07-05  Atsushi Enomoto  <[email protected]>

	* CustomBinding.cs, HttpsTransportBindingElement.cs, 
	  HttpTransportBindingElement.cs :
	  They are not ISecurityCapabilities anymore.
	  Modified code to match June CTP behavior.

2006-07-05  Atsushi Enomoto  <[email protected]>

	* StreamSecurityUpgradeProvider.cs : Identity -> EndpointIdentity.

2006-07-05  Atsushi Enomoto  <[email protected]>

	* EmptyFaultException.cs : removed unused code.
	* IRequestContext.cs, RequestContext.cs : renamed former to latter.

2006-07-05  Atsushi Enomoto  <[email protected]>

	* LayeredChannelFactory.cs : removed obsolete class.
	* ChannelFactoryBase.cs, HttpChannelFactory.cs,
	  ChannelListenerBase.cs, HttpChannelListener.cs,
	  HttpReplyChannel.cs, ChannelManagerBase.cs :
	  all those changes were brought by ChannelManagerBase changes.

2006-07-05  Atsushi Enomoto  <[email protected]>

	* ReplyChannelBase.cs, HttpChannelFactory.cs, ChannelBase.cs
	  CommunicationObject.cs, HttpChannelListener.cs,
	  ChannelFactoryBase.cs :
	  CommunicationObject abstract changes brought this madness.

2006-07-05  Atsushi Enomoto  <[email protected]>

	* BindingContext.cs : listenUri address parameters could be null in
	  June CTP.

2006-07-05  Atsushi Enomoto  <[email protected]>

	* IRequestContext.cs :
	  Now it became a class. File renaming will follow soon.
	* IChannelFactory.cs, IInputChannel.cs, IReplyChannel.cs,
	  IDuplexChannel.cs, IDuplexSessionChannel.cs,
	  IOutputChannel.cs, IOutputSessionChannel.cs,
	  IRequestChannel.cs, IRequestSessionChannel.cs :
	  They are not IDisposable anymore.
	  For IReplyChannel, IRequestContext -> RequestContext.
	* IChannelListener.cs : removed Identity. Added GetProperty().
	* ChannelListenerBase.cs, ChannelListenerBase.cs,
	  ReplyChannelBase.cs, HttpReplyChannel.cs :
	  Several members disappeared, and dependent changes.
	* HttpTransportBindingElement.cs,
	  HttpChannelListener.cs, :
	  ChannelListenerBase.SharedChannelListener vanished.

2006-07-05  Atsushi Enomoto  <[email protected]>

	* MessageEncodingBindingElement.cs
	  MtomMessageEncodingBindingElement.cs,
	  TextMessageEncodingBindingElement.cs,
	  BinaryMessageEncodingBindingElement.cs :
	  June CTP updates: AddressingVersion -> MessageVersion.
	* Binding.cs : June CTP. MessageVersion is added.
	* ChannelBase.cs, BindingContext.cs, IChannel.cs
	  ChannelListenerBase_1.cs,
	  ChannelListenerBase.cs, IChannelListener.cs,
	  IChannelFactory.cs,
	  ChannelFactoryBase.cs, ChannelManagerBase.cs :
	  June CTP. Several interface changes.
	* HttpTransportBindingElement.cs : June CTP. HttpMappingMode is gone.
	* IChannelManager.cs, LayeredChannelListener.cs,
	  GenericWrapperChannelFactory.cs,
	  GenericWrapperChannelListener.cs : They are not used anymore.

2006-07-04  Atsushi Enomoto  <[email protected]>

	* MtomMessageEncoder.cs, BinaryMessageEncoder.cs :
	  sync fix with June CTP API updates.

2006-07-03  Ankit Jain  <[email protected]>

	* MessageEncodingBindingElementConverter.cs:
	* StandardBindingConverter.cs:
	* TransportBindingElementConverter.cs:
	* TransactionFlowBindingElementConverter.cs:
	* ReliableSessionBindingElementConverter.cs:
	* SecurityBindingElementConverter.cs:
	Rename *Converter.cs to *Importer.cs

	* TransferMode.cs: Move to System.ServiceModel

2006-06-22  Atsushi Enomoto  <[email protected]>

	* CommunicationObject.cs : make sure to change State before
	  OnClosing/OnClosed/OnOpening/OnOpened when they are overriden.

2006-06-20  Atsushi Enomoto  <[email protected]>

	* Message.cs : output WSAddressing xmlns only when Action is
	  specified (To should be affected, but seems like it is ignored).

2006-06-20  Atsushi Enomoto  <[email protected]>

	* MessageImpl.cs : don't set Action when it is null.

2006-06-12  Ankit Jain  <[email protected]>

	* TransportBindingElementConverter.cs (ImportEndpoint): Implement.

2006-05-29  Atsushi Enomoto  <[email protected]>

	* SecurityBindingElement.cs, SecurityBindingElementConverter.cs :
	  some updated API fixes.

2006-05-29  Atsushi Enomoto  <[email protected]>

	* EnvelopeVersion.cs : moved back to S.SM.

2006-05-29  Atsushi Enomoto  <[email protected]>

	* IBindingManualAddressing.cs : vanished in beta2.
	* HostedTransportConfiguration.cs, EnvelopeVersion.cs,
	  LocalClientSecuritySettings.cs, LocalServiceSecuritySettings.cs :
	  namespace changes.
	* SecurityBindingElement.cs :
	  SecurityStandardsManager -> SecurityTokenSerializer.

2006-05-29  Atsushi Enomoto  <[email protected]>

	* XmlSerializerBodyWriter.cs : new file to handle 
	  TypedMessageConverter.ToMessage().

2006-04-26  Ankit Jain  <[email protected]>

	* TransportBindingElementConverter.cs (BeforeImport): Remove
	NotImplementedException.
	(ImportContract): Likewise.
	* CustomBinding.cs (.ctor): Use scheme from the binding parameter.

2006-04-14  Atsushi Enomoto  <[email protected]>

	* HttpRequestChannel.cs, HttpChannelFactory.cs : message encoder 
	  being used was not reflecting that of Binding elements.

2006-04-07  Atsushi Enomoto  <[email protected]>

	* HttpReplyChannel.cs : when SOAP action is not set as a header item,
	  just assume that it is in the message.

2006-04-06  Atsushi Enomoto  <[email protected]>

	* HttpReplyChannel.cs : actually HTTP header item might be null.

2006-04-06  Atsushi Enomoto  <[email protected]>

	* HttpReplyChannel.cs : under SOAP 1.1 SOAP Action is sent as HTTP
	  header.

2006-04-06  Atsushi Enomoto  <[email protected]>

	* TextMessageEncoder.cs : for SOAP 1.1 content type is text/xml.

2006-04-06  Atsushi Enomoto  <[email protected]>

	* MessageFault.cs : Fixed SOAP12 reason output.

2006-04-05  Atsushi Enomoto  <[email protected]>

	* HttpReplyChannel.cs : no need to set response ContentEncoding since
	  MessageEncoder.ContentType explicitly contains encoding.
	* AddressingVersion.cs : added ActionNotSupported property. Not sure
	  if it is SOAP version dependent.

2006-03-23  Atsushi Enomoto  <[email protected]>

	* HttpReplyChannel.cs : actually I could just workaround bug #77816.

2006-03-16  Atsushi Enomoto  <[email protected]>

	* HttpChannelFactory.cs BindingContext.cs
	  HttpChannelListener.cs HttpTransportBindingElement.cs :
	  Now BindingContext holds MessageEncoder, and non-custom
	  channel factory/listener should use it.
	* MtomMessageEncodingBindingElement.cs
	  TextMessageEncodingBindingElement.cs
	  BinaryMessageEncodingBindingElement.cs : BuildChannelFactory()/
	  -Listener() now sets internal BindingContext.MessageEncoder.
	  Fixed some public API.

2006-03-15  Atsushi Enomoto  <[email protected]>

	* BindingContext.cs : CanBuildChannelXXX() should not raise error
	  for insufficient elements.
	* DispatchRuntime.cs : OperationDescription name is not action. So
	  OperationSelector is created by name, not by action.
	* TextMessageEncodingBindingElement.cs : Feb. CTP API fixes.

2006-03-14  Atsushi Enomoto  <[email protected]>

	* MessageFaultBodyWriter.cs
	  XmlReaderBodyWriter.cs
	  XmlObjectSerializerBodyWriter.cs : made internal.
	* SecurityBindingElement.cs
	  AsymmetricSecurityBindingElement.cs
	  SymmetricSecurityBindingElement.cs : API fixes.
	* TransportBindingElementConverter.cs : ditto.
	* TextMessageEncodingBindingElement.cs : added set_AddressingVersion.
	* WindowsStreamSecurityBindingElement.cs
	  SslStreamSecurityBindingElement.cs
	  TransportSecurityBindingElement.cs : new files.

2006-03-14  Atsushi Enomoto  <[email protected]>

	* MessageImpl.cs : according to the W3C REC, mustUnderstand when
	  reading can be any xs:boolean value.

2006-03-14  Atsushi Enomoto  <[email protected]>

	* Message.cs MessageImpl.cs : more sorting out the role of each
	  write method.
	* MessageHeader.cs : use envelope namespace, not addressing namespace.

2006-03-14  Atsushi Enomoto  <[email protected]>

	* Message.cs : don't write body contents if it is empty.
	  Moved WriteStartElement(,"Header",) to OnWriteStartHeaders().
	* MessageImpl.cs : implemented XmlReaderMessage.OnWriteBodyContents().
	* TextMessageEncoder.cs : WriteMessage() should close XmlWriter.
	* HttpRequestChannel.cs : close request stream before GetResponse().

2006-03-13  Atsushi Enomoto  <[email protected]>

	* TextMessageEncoderFactory.cs
	  TextMessageEncoder.cs : encoder does not hold reference to the
	  factory anymore. Use MessageVersion property in CreateMssage().
	* HttpChannelListener.cs : now it holds message encoder.
	* HttpReplyChannel.cs : now it uses listener's shared message encoder.
	* MessageImpl.cs : header is optional.
	* EnvelopeVersion.cs : namespace URI is missing.

2006-03-10  Atsushi Enomoto  <[email protected]>

	* CustomBinding.cs : removed Initialize().
	* Message.cs : renamed ForwardingMessage -> XmlReaderMessage.
	* MessageImpl.cs : renamed ForwardingMessage to XmlReaderMessage (used
	  by Message.CreateMessage(MessageVersion,XmlReader,int) and
	  implemented Headers, IsEmpty and GetReaderAtBodyContents().

2006-03-08  Atsushi Enomoto  <[email protected]>

	* MessageHeaders.cs : implemented GetReaderAtHeader() and Action (it
	  could be also added by Add() method and could be reset by Remove()).
	* MessageImpl.cs : implemented more. As noted above, Now we don't 
	  have to add Action header explicitly.
	* MessageHeader.cs : recovered Writer methods and ToString() from
	  commented old version. Use prefixes for writing.
	  Use WriteObjectContent() rather than WriteObject() (it needs
	  DataContractSerializer fix btw).

2006-03-08  Atsushi Enomoto  <[email protected]>

	* MessageHeader.cs : added missing IsReferenceParameter.
	* MessageHeaderInfo.cs : added missing IsReferenceParameter.
	* MessageHeaders.cs : avoid NullRef when actors is null.
	* MessageImpl.cs : (MessageImplBase) add Action header in .ctor().
	  (ForwardingMessage) reader consumer is being added (not done).
	* MtomMessageEncodingBindingElement.cs : simply use Mtom factory.
	* MtomMessageEncoder.cs : updated ContentType value to Feb. CTP.
	* HttpRequestChannel.cs : this channel automatically call Open()
	  when Request() is called. Set content length for request.
	  Use MessageEncoder's ContentType to also handle charset.

2006-03-07  Atsushi Enomoto  <[email protected]>

	* MessageImpl.cs : make them internal.
	* HttpReplyChannel.cs : set HttpListenerResponse properties correctly.

2006-03-07  Atsushi Enomoto  <[email protected]>

	* ChannelManagerBase.cs : cleanup MonoTODO and unused field.
	* HttpChannelListener.cs : removed commented line.
	* RequestChannelBase.cs : new base class for request channel classes.
	* ChannelListenerBase.cs : OnEndClose() is rather NotImplemented yet.
	* HttpReplyChannel.cs : WaitHandle accepts limited timeout value.
	* Message.cs : default IsEmpty and IsFault false by default.
	* LayeredChannelListener.cs : removed Uri (no chance to set).
	* ChannelBase.cs : reimplemented timeout properties.
	* HttpRequestChannel.cs : now it is mostly based on
	  RequestChannelBase. Some more attempt to implement Request().

2006-03-07  Atsushi Enomoto  <[email protected]>

	* Binding.cs CustomBinding.cs : removed OnApplyConfiguration() and
	  OnInitialize(). Added more BuildChannelListener() overloads.

2006-03-06  Atsushi Enomoto  <[email protected]>

	* Binding.cs : added some more missing members especially to support
	  listener creation.
	* HttpChannelListener.cs : Uri should not be null.
	* HttpTransportBindingElement.cs : implemented
	  CanBuildChannelFactory() and CanBuildChannelListener().
	* ServiceHostBase.cs : make Initialize() practically work at OnOpen().

2006-03-06  Atsushi Enomoto  <[email protected]>

	* Binding.cs : updated default namespace property value to Feb. CTP.

2006-03-03  Atsushi Enomoto  <[email protected]>

	* AddressHeader.cs : avoid null reference when value is null.
	* BindingContext.cs : check null ListenUri args.

2006-03-03  Atsushi Enomoto  <[email protected]>

	* MessageFault.cs : Fixed default action name. Null arg check.

2006-03-03  Atsushi Enomoto  <[email protected]>

	* BindingElement.cs : Dequeue elements in BindingContext directly.
	* BindingContext.cs : Added GetProperty<T>().
	* GenericWrapperChannelFactory.cs GenericWrapperChannelListener.cs :
	  Now we don't need these extra classes, so marked as deprecated.

2006-03-03  Atsushi Enomoto  <[email protected]>

	* Binding.cs : null arg check.
	* AddressingVersion.cs : fixed constants to pass the tests.
	* BindingElement.cs : tiny meessage fix.

2006-03-02  Atsushi Enomoto  <[email protected]>

	* MessageEncodingBindingElement.cs
	  BinaryMessageEncodingBindingElement.cs
	  TextMessageEncodingBindingElement.cs
	  MtomMessageEncodingBindingElement.cs
	  MessageEncodingBindingElementConverter.cs : several API fixes.
	* BindingElement.cs : now if we use generic wrapper it causes
	  infinite loop, so for now replace it with most-possible-but-
	  untested logic.

2006-03-02  Atsushi Enomoto  <[email protected]>

	(back to normal "record-ChangeLogs" mode after the big API change mess)
	* HttpTransportBindingElement.cs : fixed minor API differences.

2006-02-23  Atsushi Enomoto  <[email protected]>

	* AsymmetricSecurityBindingElement.cs SecurityBindingElement.cs
	  SymmetricSecurityBindingElement.cs :
	  Dependent fixes for System.IdentityModel reorgainzation.

2006-02-23  Atsushi Enomoto  <[email protected]>

	* InputChannelBase.cs.notused IInputSession.cs IOutputSession.cs
	  IProxyFormatter.cs WSHttpBindingBase.cs 
	  PnrpPeerResolverBindingElement.cs IMessageHeaderInfo.cs
	  MessageInterceptorEventArgs.cs WSHttpBinding.cs
	  WSFederationBinding.cs ISessionChannel.cs
	  CompositeDuplexBindingElement.cs MessageVersion.cs
	  MessageHeader.cs IRequestSessionChannel.cs 
	  BindingElementCollection.cs IReplySessionChannel.cs
	  MessageProperties.cs IDuplexClientChannel.cs
	  IInputSessionChannel.cs MessageImpl.cs IDuplexSessionChannel.cs
	  TcpTransportBindingElement.cs EmptyFaultException.cs
	  IBindingRuntimePreferences.cs AddressHeaderCollection.cs
	  IStubFormatter.cs AsymmetricSecurityBindingElement.cs
	  ConnectionOrientedTransportBindingElement.cs
	  IProxyOperationSelector.cs MessageBuffer.cs IChannel.cs
	  PeerResolverBindingElement.cs Message.cs
	  HttpsTransportBindingElement.cs BindingElement.cs
	  NamedPipetransportBindingElement.cs IBindingManualAddressing.cs
	  MessageFaultBodyWriter.cs IReplyChannel.cs
	  IBindingCapabilities.cs AddressHeader.cs IInputChannel.cs
	  IMessageProperty.cs IOutputChannel.cs NetPeerTcpBinding.cs
	  IRequestContext.cs IInputSessionShutdown.cs
	  SecurityBindingElement.cs PeerTransportBindingElement.cs
	  IDuplexSession.cs IChannelInitializer.cs
	  IProxyMessageInspector.cs IChannelListener.cs NetTcpBinding.cs
	  AddressingVersion.cs FaultException.cs
	  IRequestChannel.cs MtomMessageEncodingBindingElement.cs
	  TransportBindingElement.cs BinaryMessageEncodingBindingElement.cs
	  TextMessageEncodingBindingElement.cs IChannelFactory.cs Binding.cs
	  ITransportBindingElement.cs IChannelManager.cs MessageFault.cs
	  MessageHeaders.cs IStubMessageInspector.cs UnderstoodHeaders.cs
	  BindingParameterCollection.cs IInstanceProvider.cs
	  WSDualHttpBinding.cs ISession.cs IErrorHandler.cs
	  MessageEncodingBindingElement.cs HttpTransportBindingElement.cs
	  IDuplexChannel.cs CustomBinding.cs IOutputSessionChannel.cs
	  MessageContractAttribute.cs SymmetricSecurityBindingElement.cs :
	  moved from System.ServiceModel due to the API changes.

2006-02-23  Atsushi Enomoto  <[email protected]>

	* ChannelFactoryBase.cs ChannelListenerBase.cs HttpChannelFactory.cs
	  HttpChannelListener.cs HttpRequestChannel.cs
	  LayeredChannelListener.cs PeerMessagePropagationFilter.cs
	  PeerNode.cs ReplyChannelBase.cs :
	  Feb. CTP API changes - chapter 1.

2006-02-15  Atsushi Enomoto  <[email protected]>

	* ChannelBase.cs : OnOpen() and OnClosed() do nothing.
	* ReplyChannelBase.cs : now it is based on ChannelBase.
	* ChannelListenerBase_1.cs : use DefaultCommunicationTimeouts.Instance
	  and check null argument in .ctor().
	* HttpReplyChannel.cs : several changes.
	  Non-async members are mostly implemented.
	* HttpChannelListener.cs : no need to receive 
	  IDefaultCommunicationTimeouts.
	* HttpRequestChannel.cs : maxSizeOfHeaders is used in MessageHeaders
	  to allocate buffer array and int.MaxValue causes OutOfMemory.

2006-02-15  Atsushi Enomoto  <[email protected]>

	* ClientFramingDecoderState.cs : added missing enum.
	* HttpRequestMessageProperty.cs HttpResponseMessageProperty.cs :
	  added missing bits.
	* ChannelBase.cs, LayeredChannelListener.cs : tiny API fixes.

2006-02-15  Atsushi Enomoto  <[email protected]>

	* HttpChannelListener.cs : Added GetChannels() and OnClose().
	  AcceptChannel() has some code now but it needs more love.

2006-02-14  Atsushi Enomoto  <[email protected]>

	* CommunicationObject.cs : Close() does not call Begin/EndClose().
	* ChannelManagerBase.cs : implemented AbortChannel and CloseChannel.
	* ChannelListenerBase.cs : implemented OnAbort and OnClose.

2006-02-10  Atsushi Enomoto  <[email protected]>

	* HttpRequestChannel.cs : close the streams.
	* HttpListener.cs
	  HttpChannelListener.cs : renamed from former to latter.

2006-02-09  Atsushi Enomoto  <[email protected]>

	* ReplyChannelBase.cs : new file for IReplyChannel implementations.
	* HttpReplyChannel.cs : new file for HTTP IReplyChannel.
	* HttpListenerFactory.cs : removed obsolete file.
	* HttpListener.cs : hacky WaitForChannel and AcceptChannel.
	* ChannelListenerBase_1.cs : implemented virtual stuff.
	* CommunicationObject.cs : Open() should not call BeginOpen() and
	  EndOpen(). Instead, invoke events individually.
	* ChannelListenerBase.cs : its Open() is WaitForChannel().

2006-02-08  Atsushi Enomoto  <[email protected]>

	* HttpRequestChannel.cs : call Flush() after serializing message
	  into HTTP stream.

2006-02-08  Atsushi Enomoto  <[email protected]>

	* HttpRequestChannel.cs : implemented pretty hacky Request().

2006-02-02  Atsushi Enomoto  <[email protected]>

	* HttpRequestChannel.cs : Manager is HttpChannelFactory.

2006-02-01  Atsushi Enomoto  <[email protected]>

	* ChannelFactoryBase.cs : removed some NotImplementedException for
	  further internal implementation.

2006-01-26  Atsushi Enomoto  <[email protected]>

	* HttpRequestChannel.cs : new file. mostly not implemented.
	* HttpChannelFactory.cs : Implemented CanCreateChannel().
	  Partly implemented CreateChannel().

2006-01-26  Atsushi Enomoto  <[email protected]>

	* HttpChannelFactory.cs : (.ctor())
	  Don't take ChannelBuildContext.

2005-11-21  Atsushi Enomoto  <[email protected]>

	* StreamSecurityUpgradeInitiator.cs PeerMessageOrigination.cs
	  ChannelBase.cs StreamSecurityUpgradeAcceptor.cs
	  PeerMessagePropagation.cs : updated to Nov. CTP.

2005-11-21  Atsushi Enomoto  <[email protected]>

	* ChannelListenerBase.cs, ChannelManagerBase.cs,
	  ChannelListenerBase_1.cs, LayeredChannelListener.cs,
	  StreamSecurityUpgradeAcceptor.cs,
	  StreamSecurityUpgradeInitiator.cs :
	  Updated to Nov. CTP API.

2005-11-21  Atsushi Enomoto  <[email protected]>

	Now we can rename ListenerFactoryBase.cs to ChannelListenerBase.cs.

2005-11-21  Atsushi Enomoto  <[email protected]>

	renamed ChannelListenerBase.cs to ChannelListenerBase_1.cs.

2005-11-21  Atsushi Enomoto  <[email protected]>

	* ChannelBase.cs : tiny filename fix.
	* ChannelListenerBase.cs : added more .ctor()s.

2005-11-21  Atsushi Enomoto  <[email protected]>

	* HttpListenerFactory.cs LayeredChannelListener.cs HttpListener.cs
	  ListenerFactoryBase.cs ChannelListenerBase.cs :
	  updated IListener related stuff to Nov. CTP.
	  file renaming will come soon.

2005-11-21  Atsushi Enomoto  <[email protected]>

	* ListenerBase.cs, ChannelListenerBase.cs :
	  moved from former to latter.
	* LayeredListenerFactory.cs, LayeredChannelListener.cs :
	  moved from former to latter.

2005-11-20  Atsushi Enomoto  <[email protected]>

	* SessionFaultedException.cs : removed in Nov. CTP

2005-11-20  Atsushi Enomoto  <[email protected]>

	* CommunicationObject.cs : updated to Nov. CTP.
	* SessionFaultedException.cs : removed (in Nov. CTP)

2005-11-03  Atsushi Enomoto  <[email protected]>

	* TextMessageEncoder.cs : kinda implemented (untested; Message is not
	  working).

2005-11-03  Atsushi Enomoto  <[email protected]>

	* MtomMessageEncoder.cs, BinaryMessageEncoderFactory.cs,
	  TextMessageEncoderFactory.cs, BinaryMessageEncoder.cs,
	  TextMessageEncoder.cs, MtomMessageEncoderFactory.cs : new files.
	* MessageEncoder.cs : largely implemented.

2005-11-02  Atsushi Enomoto  <[email protected]>

	* IRequestReplyCorrelator.cs : new file.

2005-11-02  Atsushi Enomoto  <[email protected]>

	* CommunicationObject.cs : OnClose() and OnError() are not virtual.
	* DirectionalAction.cs : implemented IComparable<DirectionalAction>.
	* MessageEncoder.cs : added misssing ToString().

2005-11-02  Atsushi Enomoto  <[email protected]>

	* ChannelBehaviorCollection.cs : moved to sys.sm.

2005-10-28  Atsushi Enomoto  <[email protected]>

	* HttpListenerFactory.cs, HttpListener.cs : new files.
	* ListenerFactoryBase.cs, ChannelManagerBase.cs,
	  CommunicationObject.cs, ChannelFactoryBase.cs,
	  StreamUpgradeProvider.cs, ChannelBase.cs : timeouts are now
	  protected internal.
	* CommunicationObject.cs : Aborted is bool. Added InternalClose()
	* ListenerFactoryBase.cs : kinda implemented GetListeners().

2005-10-26  Atsushi Enomoto  <[email protected]>

	* ListenerFactoryBase.cs : some implementation.

2005-10-26  Atsushi Enomoto  <[email protected]>

	* CommunicationObject.cs : more state fixes.

2005-10-26  Atsushi Enomoto  <[email protected]>

	* CommunicationObject.cs : some state machine fixes.

2005-10-26  Atsushi Enomoto  <[email protected]>

	* PeerNode.cs, ChannelManagerBase.cs :
	  several API fixes detected by improved corcompare.

2005-10-25  Atsushi Enomoto  <[email protected]>

	* LayeredListenerFactory.cs : added missing generic class constraint.

2005-10-25  Atsushi Enomoto  <[email protected]>

	* ListenerFactoryBase.cs,
	  ListenerBase.cs : class constraints were missing for generic args.

2005-10-24  Atsushi Enomoto  <[email protected]>

	* StreamUpgradeInitiator.cs : tiny API fix.

2005-10-23  Atsushi Enomoto  <[email protected]>

	* PeerMessagePropagationFilter.cs : tiny build fix.

2005-10-23  Atsushi Enomoto  <[email protected]>

	* HttpRequestMessageProperty.cs, HttpResponseMessageProperty.cs :
	  added Name. fixed StatusCode type.
	* StreamSecurityUpgradeInitiator.cs, StreamUpgradeAcceptor.cs,
	  PeerNode.cs, StreamSecurityUpgradeAcceptor.cs,
	  StreamUpgradeProvider.cs, StreamUpgradeInitiator.cs,
	  DirectionalAction.cs, HostedTransportConfiguration.cs,
	  StreamSecurityUpgradeProvider.cs, SessionFaultedException.cs,
	  PeerMessagePropagationFilter.cs : added missing files.
	* Dummy.cs : removed. MSMQ stuff can be added later.

2005-10-21  Atsushi Enomoto  <[email protected]>

	* DeliveryStatus.cs, DeliveryFailure.cs,
	  HttpRequestMessageProperty.cs, PeerMessageOrigination.cs,
	  PeerMessagePropagation.cs, HttpResponseMessageProperty.cs :
	  new files.
	* Dummy.cs : removed above.

2005-10-18  Atsushi Enomoto  <[email protected]>

	* ChannelFactoryBase.cs : tiny .ctor() delegation fix.

2005-10-09  Atsushi Enomoto  <[email protected]>

	* MessageEncoderFactory.cs, LayeredListenerFactory.cs,
	  MessageEncoder.cs, BufferManager.cs : new files.
	* Dummy.cs : removed above.

2005-10-09  Atsushi Enomoto  <[email protected]>

	* ChannelBase.cs, ChannelBehaviorCollection.cs : new channel files.
	* Dummy.cs : removed above.
	* CommunicationObject.cs, ListenerFactoryBase.cs : added missing bits.

2005-10-09  Atsushi Enomoto  <[email protected]>

	* HttpChannelFactory.cs : new file.

2005-10-08  Atsushi Enomoto  <[email protected]>

	* IReplyChannel.cs, IRequestContext.cs, IRequestChannel.cs:
	  moved to ../System.ServiceModel (correct location).
	* ChannelFactoryBase.cs, LayeredChannelFactory.cs, TransferMode.cs:
	  new files for channels.
	* Dummy.cs : reflected above changes.
	* ChannelManagerBase.cs : added a bit of code and todos.

2005-10-04  Atsushi Enomoto  <[email protected]>

	* ChannelManagerBase.cs, ListenerBase.cs, ListenerFactoryBase.cs :
	  added listener support files.
	* Dummy.cs : removed above.

2005-10-03  Atsushi Enomoto  <[email protected]>

	* IReplyChannel.cs, IRequestContext.cs, IRequestChannel.cs :
	  added request/reply channel interfaces.
	* Dummy.cs : removed above.
	* CommunicationObject.cs : FIXME comments.

2005-10-03  Atsushi Enomoto  <[email protected]>

	* CommunicationObject.cs : implemented some members.

2005-09-29  Atsushi Enomoto  <[email protected]>

	* CommunicationObject.cs : some signature fixes.