Constants.hpp 8.7 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345
  1. /*
  2. * ZeroTier One - Global Peer to Peer Ethernet
  3. * Copyright (C) 2012-2013 ZeroTier Networks LLC
  4. *
  5. * This program is free software: you can redistribute it and/or modify
  6. * it under the terms of the GNU General Public License as published by
  7. * the Free Software Foundation, either version 3 of the License, or
  8. * (at your option) any later version.
  9. *
  10. * This program is distributed in the hope that it will be useful,
  11. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  12. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  13. * GNU General Public License for more details.
  14. *
  15. * You should have received a copy of the GNU General Public License
  16. * along with this program. If not, see <http://www.gnu.org/licenses/>.
  17. *
  18. * --
  19. *
  20. * ZeroTier may be used and distributed under the terms of the GPLv3, which
  21. * are available at: http://www.gnu.org/licenses/gpl-3.0.html
  22. *
  23. * If you would like to embed ZeroTier into a commercial application or
  24. * redistribute it in a modified binary form, please contact ZeroTier Networks
  25. * LLC. Start here: http://www.zerotier.com/
  26. */
  27. #ifndef _ZT_CONSTANTS_HPP
  28. #define _ZT_CONSTANTS_HPP
  29. //
  30. // This include file also auto-detects and canonicalizes some environment
  31. // information defines:
  32. //
  33. // __LINUX__
  34. // __APPLE__
  35. // __UNIX_LIKE__ - any "unix like" OS (BSD, posix, etc.)
  36. // __WINDOWS__
  37. //
  38. // Also makes sure __BYTE_ORDER is defined reasonably.
  39. //
  40. // Canonicalize Linux... is this necessary? Do it anyway to be defensive.
  41. #if defined(__linux__) || defined(linux) || defined(__LINUX__) || defined(__linux)
  42. #ifndef __LINUX__
  43. #define __LINUX__
  44. #ifndef __UNIX_LIKE__
  45. #define __UNIX_LIKE__
  46. #endif
  47. #endif
  48. #endif
  49. // TODO: Android is what? Linux technically, but does it define it?
  50. // OSX and iOS are unix-like OSes far as we're concerned
  51. #ifdef __APPLE__
  52. #ifndef __UNIX_LIKE__
  53. #define __UNIX_LIKE__
  54. #endif
  55. #endif
  56. // Linux has endian.h
  57. #ifdef __LINUX__
  58. #include <endian.h>
  59. #endif
  60. #if defined(_WIN32) || defined(_WIN64)
  61. #ifndef __WINDOWS__
  62. #define __WINDOWS__
  63. #endif
  64. #define NOMINMAX
  65. #pragma warning(disable : 4290)
  66. #pragma warning(disable : 4996)
  67. #pragma warning(disable : 4101)
  68. #undef __UNIX_LIKE__
  69. #define ZT_PATH_SEPARATOR '\\'
  70. #define ZT_PATH_SEPARATOR_S "\\"
  71. #define ZT_EOL_S "\r\n"
  72. #endif
  73. // Assume these are little-endian. PPC is not supported for OSX, and ARM
  74. // runs in little-endian mode for these OS families.
  75. #if defined(__APPLE__) || defined(__WINDOWS__)
  76. #undef __BYTE_ORDER
  77. #undef __LITTLE_ENDIAN
  78. #undef __BIG_ENDIAN
  79. #define __BIG_ENDIAN 4321
  80. #define __LITTLE_ENDIAN 1234
  81. #define __BYTE_ORDER 1234
  82. #endif
  83. #ifdef __UNIX_LIKE__
  84. #define ZT_PATH_SEPARATOR '/'
  85. #define ZT_PATH_SEPARATOR_S "/"
  86. #define ZT_EOL_S "\n"
  87. #endif
  88. // Error out if required symbols are missing
  89. #ifndef __BYTE_ORDER
  90. error_no_byte_order_defined;
  91. #endif
  92. #ifndef ZT_OSNAME
  93. #ifdef __WINDOWS__
  94. #define ZT_OSNAME "windows"
  95. #else
  96. no ZT_OSNAME defined;
  97. #endif
  98. #endif
  99. #ifndef ZT_ARCH
  100. #ifdef __WINDOWS__
  101. #ifdef _WIN64
  102. #define ZT_ARCH "x64"
  103. #else
  104. #define ZT_ARCH "x86"
  105. #endif
  106. #else
  107. error_no_ZT_ARCH_defined;
  108. #endif
  109. #endif
  110. /**
  111. * Length of a ZeroTier address in bytes
  112. */
  113. #define ZT_ADDRESS_LENGTH 5
  114. /**
  115. * Addresses beginning with this byte are reserved for the joy of in-band signaling
  116. */
  117. #define ZT_ADDRESS_RESERVED_PREFIX 0xff
  118. /**
  119. * Default local UDP port
  120. */
  121. #define ZT_DEFAULT_UDP_PORT 9993
  122. /**
  123. * Local control port, also used for multiple invocation check
  124. */
  125. #define ZT_DEFAULT_CONTROL_UDP_PORT 39393
  126. /**
  127. * Default payload MTU for UDP packets
  128. *
  129. * In the future we might support UDP path MTU discovery, but for now we
  130. * set a maximum that is equal to 1500 minus 8 (for PPPoE overhead, common
  131. * in some markets) minus 48 (IPv6 UDP overhead).
  132. */
  133. #define ZT_UDP_DEFAULT_PAYLOAD_MTU 1444
  134. /**
  135. * MTU used for Ethernet tap device
  136. *
  137. * This is pretty much an unchangeable global constant. To make it change
  138. * across nodes would require logic to send ICMP packet too big messages,
  139. * which would complicate things. 1500 has been good enough on most LANs
  140. * for ages, so a larger MTU should be fine for the forseeable future. This
  141. * typically results in two UDP packets per single large frame. Experimental
  142. * results seem to show that this is good. Larger MTUs resulting in more
  143. * fragments seemed too brittle on slow/crummy links for no benefit.
  144. *
  145. * If this does change, also change it in tap.h in the tuntaposx code under
  146. * mac-tap.
  147. *
  148. * Overhead for a normal frame split into two packets:
  149. *
  150. * 1414 = 1444 (typical UDP MTU) - 28 (packet header) - 2 (ethertype)
  151. * 1428 = 1444 (typical UDP MTU) - 16 (fragment header)
  152. * SUM: 2842
  153. *
  154. * We use 2800, which leaves some room for other payload in other types of
  155. * messages such as multicast propagation or future support for bridging.
  156. */
  157. #define ZT_IF_MTU 2800
  158. /**
  159. * Maximum number of packet fragments we'll support
  160. *
  161. * The actual spec allows 16, but this is the most we'll support right
  162. * now. Packets with more than this many fragments are dropped.
  163. */
  164. #define ZT_MAX_PACKET_FRAGMENTS 3
  165. /**
  166. * Timeout for receipt of fragmented packets in ms
  167. *
  168. * Since there's no retransmits, this is just a really bad case scenario for
  169. * transit time. It's short enough that a DOS attack from exhausing buffers is
  170. * very unlikely, as the transfer rate would have to be fast enough to fill
  171. * system memory in this time.
  172. */
  173. #define ZT_FRAGMENTED_PACKET_RECEIVE_TIMEOUT 1000
  174. /**
  175. * First byte of MAC addresses derived from ZeroTier addresses
  176. *
  177. * This has the 0x02 bit set, which indicates a locally administrered
  178. * MAC address rather than one with a known HW ID.
  179. */
  180. #define ZT_MAC_FIRST_OCTET 0x32
  181. /**
  182. * Length of secret key in bytes
  183. */
  184. #define ZT_PEER_SECRET_KEY_LENGTH 32
  185. /**
  186. * How often Topology::clean() and Network::clean() are called in ms
  187. */
  188. #define ZT_DB_CLEAN_PERIOD 300000
  189. /**
  190. * Delay between WHOIS retries in ms
  191. */
  192. #define ZT_WHOIS_RETRY_DELAY 350
  193. /**
  194. * Maximum identity WHOIS retries
  195. */
  196. #define ZT_MAX_WHOIS_RETRIES 3
  197. /**
  198. * Transmit queue entry timeout
  199. */
  200. #define ZT_TRANSMIT_QUEUE_TIMEOUT (ZT_WHOIS_RETRY_DELAY * (ZT_MAX_WHOIS_RETRIES + 1))
  201. /**
  202. * Receive queue entry timeout
  203. */
  204. #define ZT_RECEIVE_QUEUE_TIMEOUT (ZT_WHOIS_RETRY_DELAY * (ZT_MAX_WHOIS_RETRIES + 1))
  205. /**
  206. * Maximum number of ZT hops allowed
  207. *
  208. * The protocol allows up to 7, but we limit it to something smaller.
  209. */
  210. #define ZT_RELAY_MAX_HOPS 3
  211. /**
  212. * Size of multicast deduplication ring buffer in 64-bit ints
  213. */
  214. #define ZT_MULTICAST_DEDUP_HISTORY_LENGTH 512
  215. /**
  216. * Default number of bits in multicast propagation prefix
  217. */
  218. #define ZT_DEFAULT_MULTICAST_PREFIX_BITS 1
  219. /**
  220. * Default max depth (TTL) for multicast propagation
  221. */
  222. #define ZT_DEFAULT_MULTICAST_DEPTH 64
  223. /**
  224. * Global maximum for multicast propagation depth
  225. *
  226. * This is kind of an insane value, meant as a sanity check.
  227. */
  228. #define ZT_MULTICAST_GLOBAL_MAX_DEPTH 500
  229. /**
  230. * Expire time for multicast 'likes' in ms
  231. */
  232. #define ZT_MULTICAST_LIKE_EXPIRE 120000
  233. /**
  234. * Time between polls of local taps for multicast membership changes
  235. */
  236. #define ZT_MULTICAST_LOCAL_POLL_PERIOD 10000
  237. /**
  238. * Delay between scans of the topology active peer DB for peers that need ping
  239. */
  240. #define ZT_PING_CHECK_DELAY 7000
  241. /**
  242. * Delay between checks of network configuration fingerprint
  243. */
  244. #define ZT_NETWORK_FINGERPRINT_CHECK_DELAY 5000
  245. /**
  246. * Delay between pings (actually HELLOs) to direct links
  247. */
  248. #define ZT_PEER_DIRECT_PING_DELAY 120000
  249. /**
  250. * Delay in ms between firewall opener packets to direct links
  251. *
  252. * This should be lower than the UDP conversation entry timeout in most
  253. * stateful firewalls.
  254. */
  255. #define ZT_FIREWALL_OPENER_DELAY 50000
  256. /**
  257. * Delay between requests for updated network autoconf information
  258. */
  259. #define ZT_NETWORK_AUTOCONF_DELAY 120000
  260. /**
  261. * Delay in core loop between checks of network autoconf newness
  262. */
  263. #define ZT_NETWORK_AUTOCONF_CHECK_DELAY 7000
  264. /**
  265. * Minimum delay in Node service loop
  266. *
  267. * This is the shortest of the check delays/periods.
  268. */
  269. #define ZT_MIN_SERVICE_LOOP_INTERVAL ZT_NETWORK_FINGERPRINT_CHECK_DELAY
  270. /**
  271. * Activity timeout for links
  272. *
  273. * A link that hasn't spoken in this long is simply considered inactive.
  274. */
  275. #define ZT_PEER_LINK_ACTIVITY_TIMEOUT ((ZT_PEER_DIRECT_PING_DELAY * 2) + 1000)
  276. /**
  277. * IP hops (a.k.a. TTL) to set for firewall opener packets
  278. *
  279. * 2 should permit traversal of double-NAT configurations, such as from inside
  280. * a VM running behind local NAT on a host that is itself behind NAT.
  281. */
  282. #define ZT_FIREWALL_OPENER_HOPS 2
  283. /**
  284. * Delay sleep overshoot for detection of a probable sleep/wake event
  285. */
  286. #define ZT_SLEEP_WAKE_DETECTION_THRESHOLD 2000
  287. /**
  288. * Time to pause main service loop after sleep/wake detect
  289. */
  290. #define ZT_SLEEP_WAKE_SETTLE_TIME 5000
  291. /**
  292. * Minimum interval between attempts by relays to unite peers
  293. */
  294. #define ZT_MIN_UNITE_INTERVAL 30000
  295. /**
  296. * Delay in milliseconds between firewall opener and real packet for NAT-t
  297. */
  298. #define ZT_RENDEZVOUS_NAT_T_DELAY 500
  299. #endif