Removed unused ib-compress.

3rdparty/ib-compress/README.md

@@ -1,54 +0,0 @@
-# Vertex Cache Optimised Index Buffer Compression
-
-This is a small proof of concept for compressing and decompressing index buffer triangle lists. It's designed to maintain the order of the triangle list and perform best with a triangle list that has been vertex cache post-transform optimised (a pre-transform cache optimisation is done as part of the compression).
-
-It's also designed to be relatively lightweight, with a decompression throughput in the tens of millions of triangles per core.  It does not achieve state of the art levels of compression levels (which can be less than a bit per triangle, as well as providing good chances for vertex prediction), but it does maintain ordering of triangles and support arbitrary topologies. 
-
-There are some cases where the vertices within a triangle are re-ordered, but the general winding direction is maintained.
-
-## How does it work?
-
-The inspiration was a mix of Fabian Giesen's [Simple loss-less index buffer compression](http://fgiesen.wordpress.com/2013/12/14/simple-lossless-index-buffer-compression/) and
-the higher compression algorithms that make use of shared edges and re-order triangles. The idea was that there is probably a middle ground between them.
-
-The basic goals were:
-
-* Maintain the ordering of triangles, exploiting vertex cache optimal ordering.
-
-* Exploit recent triangle connectivity.
-
-* Make it fast, especially for decompression, without the need to maintain large extra data structures, like winged edge.
-
-* Make it simple enough to be easily understandable. 
-
-The vertex cache optimisation means that there will be quite a few vertices and edges shared between the next triangle in the list and the previous. We exploit this by maintaining two relatively small fixed size FIFOs, an edge FIFO and a vertex FIFO (not unlike the vertex cache itself, except we store recent indices).
-
-The compression relies on 4 codes: 
-
-1. A _new vertex_ code, for vertices that have not yet been seen. 
-
-2. A _cached edge_ code, for edges that have been seen recently. This code is followed by a relative index back into the edge FIFO.
-
-3. A _cached vertex_ code, for vertices that have been seen recently. This code is followed by a relative index back into the vertex FIFO.
-
-4. A _free vertex_ code, for vertices that have been seen, but not recently. This code is followed by a variable length integer encoding of the index relative to the most recent new vertex.
-
-Triangles can either consist of two codes, a cached edge followed by one of the vertex codes, or of 3 of the vertex codes. The most common codes in an optimised mesh are generally the cached edge and new vertex codes.
-
-Cached edges are always the first code in any triangle they appear in and may correspond to any edge in the original triangle (we check all the edges against the FIFO). This means that an individual triangle may have its vertices specified in a different order (but in the same winding direction) than the original uncompressed one.
-
-New vertex codes work because vertices are re-ordered to the order in which they appear in the mesh, meaning whenever we encounter a new vertex, we can just read and an internal counter to get
-the current index, incrementing it afterwards. This has the benefit of also meaning vertices are in pre-transform cache optimised order.
-
-## Does it actually work?
-
-That's a better question! While my thoughts were that in theory it would average around 11-12bits a triangle, the Stanford Armadillo mesh (optimised with Tom Forsyth's vertex cache optimisation algorithm), with 345944 triangles, compresses the index buffer down to 563122 bytes, which is more like 13 and the Stanford Bunny is 12.85bits or so. This is not anywhere near the state of the art in terms of compression (which get down to less than a bit), but that isn't the goal.
-
-Performance wise, with the code posted here, the Armadillo compresses in 18.5 milliseconds and decompresses in 6.6 milliseconds on average on my system. The Stanford bunny is more like 1.4 milliseconds to decompress, relatively.
-
-## Update!
-
-I've added a second more efficient (in terms of both speed and size) compression algorithm (CompressIndexBuffer2 and DecompressIndexBuffer2), as well as some changes upstream from Branimir Karadžić, who made some compiler compatibility fixes and added 16bit indice support. This uses a code per triangle instead of multiple codes for different cases.
-
-For details of the original algorithm, please see this [blog post](http://conorstokes.github.io/graphics/2014/09/28/vertex-cache-optimised-index-buffer-compression/). For details of the second algorithm, please see this [blog post](http://conorstokes.github.io/graphics/2014/09/28/vertex-cache-optimised-index-buffer-compression/). 
-

3rdparty/ib-compress/indexbuffercompression.cpp

@@ -1,828 +0,0 @@
-/*
-Copyright (c) 2014-2015, Conor Stokes
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
-
-1. Redistributions of source code must retain the above copyright notice, this
-list of conditions and the following disclaimer.
-2. Redistributions in binary form must reproduce the above copyright notice,
-this list of conditions and the following disclaimer in the documentation
-and/or other materials provided with the distribution.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
-ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
-#include "indexbuffercompression.h"
-#include "writebitstream.h"
-#include "indexcompressionconstants.h"
-#include <assert.h>
-
-#ifdef _MSC_VER
-#define IBC_INLINE __forceinline
-#else
-#define IBC_INLINE inline
-#endif 
-
-// Individual vertex type classifications.
-enum VertexClassification
-{
-    NEW_VERTEX = 0,
-    CACHED_VERTEX = 1,
-    FREE_VERTEX = 2
-};
-
-// Individual case for handling a combination of vertice classifications.
-struct VertexCompressionCase
-{
-    IndexBufferTriangleCodes code;
-    uint32_t vertexOrder[ 3 ];
-};
-
-// This is a table for looking up the appropriate code and rotation for a set of vertex classifications.
-const VertexCompressionCase CompressionCase[3][3][3] =
-{
-    { // new 
-        { // new new
-            { // new new new 
-                IB_NEW_NEW_NEW, { 0, 1, 2 }
-            },
-            { // new new cached
-                IB_NEW_NEW_CACHED, { 0, 1, 2 }
-            },
-            { // new new free
-                IB_NEW_NEW_FREE, { 0, 1, 2 }
-            }
-        },
-        { // new cached
-            { // new cached new
-                IB_NEW_NEW_CACHED, { 2, 0, 1 }
-            },
-            {  // new cached cached
-                IB_NEW_CACHED_CACHED, { 0, 1, 2 }
-            },
-            { // new cached free
-                IB_NEW_CACHED_FREE, { 0, 1, 2 }
-            }
-        },
-        { // new free
-            { // new free new
-                IB_NEW_NEW_FREE, { 2, 0, 1 }
-            },
-            { // new free cached
-                IB_NEW_FREE_CACHED, { 0, 1, 2 }
-            },
-            { // new free free
-                IB_NEW_FREE_FREE, { 0, 1, 2 }
-            }
-        }
-    },
-    { // cached
-        { // cached new 
-            { // cached new new
-                IB_NEW_NEW_CACHED, { 1, 2, 0 }
-            },
-            { // cached new cached
-                IB_NEW_CACHED_CACHED, { 1, 2, 0 }
-            },
-            { // cached new free
-                IB_NEW_FREE_CACHED, { 1, 2, 0 }
-            }
-        },
-        { // cached cached
-            { // cached cached new
-                IB_NEW_CACHED_CACHED, { 2, 0, 1 }
-            },
-            { // cached cached cached
-                IB_CACHED_CACHED_CACHED, { 0, 1, 2 }
-            },
-            { // cached cached free
-                IB_CACHED_CACHED_FREE, { 0, 1, 2 }
-            }
-        },
-        { // cached free
-            { // cached free new
-                IB_NEW_CACHED_FREE, { 2, 0, 1 }
-            },
-            { // cached free cached
-                IB_CACHED_CACHED_FREE, { 2, 0, 1 }
-            },
-            { // cached free free 
-                IB_CACHED_FREE_FREE, { 0, 1, 2 }
-            }
-        }
-    },
-    { // free
-        { // free new
-            { // free new new
-                IB_NEW_NEW_FREE, { 1, 2, 0 }
-            },
-            { // free new cached
-                IB_NEW_CACHED_FREE, { 1, 2, 0 }
-            },
-            { // free new free
-                IB_NEW_FREE_FREE, { 1, 2, 0 }
-            }
-        },
-        { // free cached
-            { // free cached new
-                IB_NEW_FREE_CACHED, { 2, 0, 1 }
-            },
-            { // free cached cached
-                IB_CACHED_CACHED_FREE, { 1, 2, 0 }
-            },
-            { // free cached free
-                IB_CACHED_FREE_FREE, { 1, 2, 0 }
-            }
-        },
-        { // free free
-            { // free free new
-                IB_NEW_FREE_FREE, { 2, 0, 1 }
-            },
-            { // free free cached
-                IB_CACHED_FREE_FREE, { 2, 0, 1 }
-            },
-            { // free free free
-                IB_FREE_FREE_FREE, { 0, 1, 2 }
-            }
-        }
-    }
-};
-
-const uint32_t VERTEX_NOT_MAPPED = 0xFFFFFFFF;
-
-// Classify a vertex as new, cached or free, outputting the relative position in the vertex indice cache FIFO.
-static IBC_INLINE VertexClassification ClassifyVertex( uint32_t vertex, const uint32_t* vertexRemap, const uint32_t* vertexFifo, uint32_t verticesRead, uint32_t& cachedVertexIndex )
-{
-    if ( vertexRemap[ vertex ] == VERTEX_NOT_MAPPED )
-    {
-        return NEW_VERTEX;
-    }
-    else
-    {
-        int32_t lowestVertexCursor = verticesRead >= VERTEX_FIFO_SIZE ? verticesRead - VERTEX_FIFO_SIZE : 0;
-
-        // Probe backwards in the vertex FIFO for a cached vertex
-        for ( int32_t vertexCursor = verticesRead - 1; vertexCursor >= lowestVertexCursor; --vertexCursor )
-        {
-            if ( vertexFifo[ vertexCursor & VERTEX_FIFO_MASK ] == vertex )
-            {
-                cachedVertexIndex = ( verticesRead - 1 ) - vertexCursor;
-
-                return CACHED_VERTEX;
-            }
-        }
-
-        return FREE_VERTEX;
-    }
-}
-
-template <typename Ty>
-void CompressTriangleCodes1( const Ty* triangles,
-                             uint32_t triangleCount, 
-                             uint32_t* vertexRemap, 
-                             uint32_t vertexCount, 
-                             WriteBitstream& output )
-{
-    Edge      edgeFifo[ EDGE_FIFO_SIZE ];
-    uint32_t  vertexFifo[ VERTEX_FIFO_SIZE ];
-
-    uint32_t  edgesRead      = 0;
-    uint32_t  verticesRead   = 0;
-    uint32_t  newVertices    = 0;
-    const Ty* triangleEnd = triangles + ( triangleCount * 3 );
-
-    assert( vertexCount < 0xFFFFFFFF );
-
-    uint32_t* vertexRemapEnd = vertexRemap + vertexCount;
-
-    // clear the vertex remapping to "not found" value of 0xFFFFFFFF - dirty, but low overhead.
-    for ( uint32_t* remappedVertex = vertexRemap; remappedVertex < vertexRemapEnd; ++remappedVertex )
-    {
-        *remappedVertex = VERTEX_NOT_MAPPED;
-    }
-
-    // iterate through the triangles
-    for ( const Ty* triangle = triangles; triangle < triangleEnd; triangle += 3 )
-    {
-        int32_t lowestEdgeCursor = edgesRead >= EDGE_FIFO_SIZE ? edgesRead - EDGE_FIFO_SIZE : 0;
-        int32_t edgeCursor       = edgesRead - 1;
-        bool    foundEdge        = false;
-
-        int32_t spareVertex = 0;
-
-        // check to make sure that there are no degenerate triangles.
-        assert( triangle[ 0 ] != triangle[ 1 ] && triangle[ 1 ] != triangle[ 2 ] && triangle[ 2 ] != triangle[ 0 ] );
-
-        // Probe back through the edge fifo to see if one of the triangle edges is in the FIFO
-        for ( ; edgeCursor >= lowestEdgeCursor; --edgeCursor )
-        {
-            const Edge& edge = edgeFifo[ edgeCursor & EDGE_FIFO_MASK ];
-
-            // check all the edges in order and save the free vertex.
-            if ( edge.second == triangle[ 0 ] && edge.first == triangle[ 1 ] )
-            {
-                foundEdge   = true;
-                spareVertex = 2;
-                break;
-            }
-            else if ( edge.second == triangle[ 1 ] && edge.first == triangle[ 2 ] )
-            {
-                foundEdge   = true;
-                spareVertex = 0;
-                break;
-            }
-            else if ( edge.second == triangle[ 2 ] && edge.first == triangle[ 0 ] )
-            {
-                foundEdge   = true;
-                spareVertex = 1;
-                break;
-            }
-        }
-
-        // we found an edge so write it out, so classify a vertex and then write out the correct code.
-        if ( foundEdge )
-        {
-            uint32_t cachedVertex;
-            
-            uint32_t             spareVertexIndice = triangle[ spareVertex ];
-            VertexClassification freeVertexClass   = ClassifyVertex( spareVertexIndice, vertexRemap, vertexFifo, verticesRead, cachedVertex );
-            uint32_t             relativeEdge      = ( edgesRead - 1 ) - edgeCursor;
-
-            switch ( freeVertexClass )
-            {
-            case NEW_VERTEX:
-                
-                switch ( relativeEdge )
-                {
-                case 0:
-
-                    output.Write( IB_EDGE_0_NEW, IB_TRIANGLE_CODE_BITS );
-                    break;
-
-                case 1:
-
-                    output.Write( IB_EDGE_1_NEW, IB_TRIANGLE_CODE_BITS );
-                    break;
-
-                default:
-
-                    output.Write( IB_EDGE_NEW, IB_TRIANGLE_CODE_BITS );
-                    output.Write( relativeEdge, CACHED_EDGE_BITS );
-                    break;
-
-                }
-
-                vertexFifo[ verticesRead & VERTEX_FIFO_MASK ] = spareVertexIndice;
-                vertexRemap[ spareVertexIndice ]              = newVertices;
-
-                ++verticesRead;
-                ++newVertices;
-                break;
-
-            case CACHED_VERTEX:
-
-                output.Write( IB_EDGE_CACHED, IB_TRIANGLE_CODE_BITS );
-                output.Write( relativeEdge, CACHED_EDGE_BITS );
-                output.Write( cachedVertex, CACHED_VERTEX_BITS );
-                break;
-
-            case FREE_VERTEX:
-
-                output.Write( IB_EDGE_FREE, IB_TRIANGLE_CODE_BITS );
-                output.Write( relativeEdge, CACHED_EDGE_BITS );
-
-                vertexFifo[ verticesRead & VERTEX_FIFO_MASK ] = spareVertexIndice;
-
-                ++verticesRead;
-                
-                output.WriteVInt( ( newVertices - 1 ) - vertexRemap[ spareVertexIndice ] );
-                break;
-
-            }
-
-            // Populate the edge fifo with the the remaining edges
-            // Note - the winding order is important as we'll need to re-produce this on decompression.
-            // The edges are put in as if the found edge is the first edge in the triangle (which it will be when we
-            // reconstruct).
-            switch ( spareVertex )
-            {
-            case 0:
-
-                edgeFifo[ edgesRead & EDGE_FIFO_MASK ].set( triangle[ 2 ], triangle[ 0 ] );
-
-                ++edgesRead;
-
-                edgeFifo[ edgesRead & EDGE_FIFO_MASK ].set( triangle[ 0 ], triangle[ 1 ] );
-
-                ++edgesRead;
-                break;
-
-            case 1:
-
-                edgeFifo[ edgesRead & EDGE_FIFO_MASK ].set( triangle[ 0 ], triangle[ 1 ] );
-
-                ++edgesRead;
-
-                edgeFifo[ edgesRead & EDGE_FIFO_MASK ].set( triangle[ 1 ], triangle[ 2 ] );
-
-                ++edgesRead;
-                break;
-
-            case 2:
-
-                edgeFifo[ edgesRead & EDGE_FIFO_MASK ].set( triangle[ 1 ], triangle[ 2 ] );
-
-                ++edgesRead;
-
-                edgeFifo[ edgesRead & EDGE_FIFO_MASK ].set( triangle[ 2 ], triangle[ 0 ] );
-
-                ++edgesRead;
-                break;
-            }
-        }
-        else
-        {
-            VertexClassification classifications[ 3 ];
-            uint32_t             cachedVertexIndices[ 3 ];
-
-            // classify each vertex as new, cached or free, potentially extracting a cached indice.
-            classifications[ 0 ] = ClassifyVertex( triangle[ 0 ], vertexRemap, vertexFifo, verticesRead, cachedVertexIndices[ 0 ] );
-            classifications[ 1 ] = ClassifyVertex( triangle[ 1 ], vertexRemap, vertexFifo, verticesRead, cachedVertexIndices[ 1 ] );
-            classifications[ 2 ] = ClassifyVertex( triangle[ 2 ], vertexRemap, vertexFifo, verticesRead, cachedVertexIndices[ 2 ] );
-
-            // use the classifications to lookup the matching compression code and potentially rotate the order of the vertices.
-            const VertexCompressionCase& compressionCase = CompressionCase[ classifications[ 0 ] ][ classifications[ 1 ] ][ classifications[ 2 ] ];
-            
-            // rotate the order of the vertices based on the compression classification.
-            uint32_t reorderedTriangle[ 3 ];
-            
-            reorderedTriangle[ 0 ] = triangle[ compressionCase.vertexOrder[ 0 ] ];
-            reorderedTriangle[ 1 ] = triangle[ compressionCase.vertexOrder[ 1 ] ];
-            reorderedTriangle[ 2 ] = triangle[ compressionCase.vertexOrder[ 2 ] ];
-
-            output.Write( compressionCase.code, IB_TRIANGLE_CODE_BITS );
-
-            switch ( compressionCase.code )
-            {
-            case IB_NEW_NEW_NEW:
-            {
-                vertexFifo[ verticesRead & VERTEX_FIFO_MASK ]         = triangle[ 0 ];
-                vertexFifo[ ( verticesRead + 1 ) & VERTEX_FIFO_MASK ] = triangle[ 1 ];
-                vertexFifo[ ( verticesRead + 2 ) & VERTEX_FIFO_MASK ] = triangle[ 2 ];
-
-                vertexRemap[ triangle[ 0 ] ] = newVertices;
-                vertexRemap[ triangle[ 1 ] ] = newVertices + 1;
-                vertexRemap[ triangle[ 2 ] ] = newVertices + 2;
-
-                verticesRead += 3;
-                newVertices  += 3;
-
-                break;
-            }
-            case IB_NEW_NEW_CACHED:
-            {
-                vertexFifo[ verticesRead & VERTEX_FIFO_MASK ]         = reorderedTriangle[ 0 ];
-                vertexFifo[ ( verticesRead + 1 ) & VERTEX_FIFO_MASK ] = reorderedTriangle[ 1 ];
-
-                output.Write( cachedVertexIndices[ compressionCase.vertexOrder[ 2 ] ], CACHED_VERTEX_BITS );
-
-                vertexRemap[ reorderedTriangle[ 0 ] ] = newVertices;
-                vertexRemap[ reorderedTriangle[ 1 ] ] = newVertices + 1;
-
-                verticesRead += 2;
-                newVertices  += 2;
-
-                break;
-            }
-            case IB_NEW_NEW_FREE:
-            {
-                vertexFifo[ verticesRead & VERTEX_FIFO_MASK ]         = reorderedTriangle[ 0 ];
-                vertexFifo[ ( verticesRead + 1 ) & VERTEX_FIFO_MASK ] = reorderedTriangle[ 1 ];
-                vertexFifo[ ( verticesRead + 2 ) & VERTEX_FIFO_MASK ] = reorderedTriangle[ 2 ];
-
-                output.WriteVInt( ( newVertices - 1 ) - vertexRemap[ reorderedTriangle[ 2 ] ] );
-
-                vertexRemap[ reorderedTriangle[ 0 ] ] = newVertices;
-                vertexRemap[ reorderedTriangle[ 1 ] ] = newVertices + 1;
-
-                verticesRead += 3;
-                newVertices  += 2;
-
-                break;
-            }
-            case IB_NEW_CACHED_CACHED:
-            {
-                vertexFifo[ verticesRead & VERTEX_FIFO_MASK ] = reorderedTriangle[ 0 ];
-
-                output.Write( cachedVertexIndices[ compressionCase.vertexOrder[ 1 ] ], CACHED_VERTEX_BITS );
-                output.Write( cachedVertexIndices[ compressionCase.vertexOrder[ 2 ] ], CACHED_VERTEX_BITS );
-
-                vertexRemap[ reorderedTriangle[ 0 ] ] = newVertices;
-                verticesRead += 1;
-                newVertices  += 1;
-
-                break;
-            }
-            case IB_NEW_CACHED_FREE:
-            {
-                vertexFifo[ verticesRead & VERTEX_FIFO_MASK ]         = reorderedTriangle[ 0 ];
-                vertexFifo[ ( verticesRead + 1 ) & VERTEX_FIFO_MASK ] = reorderedTriangle[ 2 ];
-
-                output.Write( cachedVertexIndices[ compressionCase.vertexOrder[ 1 ] ], CACHED_VERTEX_BITS );
-                output.WriteVInt( ( newVertices - 1 ) - vertexRemap[ reorderedTriangle[ 2 ] ] );
-
-                vertexRemap[ reorderedTriangle[ 0 ] ] = newVertices;
-
-                verticesRead += 2;
-                newVertices  += 1;
-
-                break;
-            }
-            case IB_NEW_FREE_CACHED:
-            {
-                vertexFifo[ verticesRead & VERTEX_FIFO_MASK ]         = reorderedTriangle[ 0 ];
-                vertexFifo[ ( verticesRead + 1 ) & VERTEX_FIFO_MASK ] = reorderedTriangle[ 1 ];
-
-                output.WriteVInt( ( newVertices - 1 ) - vertexRemap[ reorderedTriangle[ 1 ] ] );
-                output.Write( cachedVertexIndices[ compressionCase.vertexOrder[ 2 ] ], CACHED_VERTEX_BITS );
-
-                vertexRemap[ reorderedTriangle[ 0 ] ] = newVertices;
-
-                verticesRead += 2;
-                newVertices  += 1;
-
-                break;
-            }
-            case IB_NEW_FREE_FREE:
-            {
-                vertexFifo[ verticesRead & VERTEX_FIFO_MASK ]         = reorderedTriangle[ 0 ];
-                vertexFifo[ ( verticesRead + 1 ) & VERTEX_FIFO_MASK ] = reorderedTriangle[ 1 ];
-                vertexFifo[ ( verticesRead + 2 ) & VERTEX_FIFO_MASK ] = reorderedTriangle[ 2 ];
-
-                output.WriteVInt( ( newVertices - 1 ) - vertexRemap[ reorderedTriangle[ 1 ] ] );
-                output.WriteVInt( ( newVertices - 1 ) - vertexRemap[ reorderedTriangle[ 2 ] ] );
-
-                vertexRemap[ reorderedTriangle[ 0 ] ] = newVertices;
-
-                verticesRead += 3;
-                newVertices  += 1;
-
-                break;
-            }
-            case IB_CACHED_CACHED_CACHED:
-            {
-                output.Write( cachedVertexIndices[ compressionCase.vertexOrder[ 0 ] ], CACHED_VERTEX_BITS );
-                output.Write( cachedVertexIndices[ compressionCase.vertexOrder[ 1 ] ], CACHED_VERTEX_BITS );
-                output.Write( cachedVertexIndices[ compressionCase.vertexOrder[ 2 ] ], CACHED_VERTEX_BITS );
-                break;
-            }
-            case IB_CACHED_CACHED_FREE:
-            {
-                vertexFifo[ verticesRead & VERTEX_FIFO_MASK ] = reorderedTriangle[ 2 ];
-
-                output.Write( cachedVertexIndices[ compressionCase.vertexOrder[ 0 ] ], CACHED_VERTEX_BITS );
-                output.Write( cachedVertexIndices[ compressionCase.vertexOrder[ 1 ] ], CACHED_VERTEX_BITS );
-                output.WriteVInt( ( newVertices - 1 ) - vertexRemap[ reorderedTriangle[ 2 ] ] );
-
-                verticesRead += 1;
-
-                break;
-            }
-            case IB_CACHED_FREE_FREE:
-            {
-                vertexFifo[ verticesRead & VERTEX_FIFO_MASK ]         = reorderedTriangle[ 1 ];
-                vertexFifo[ ( verticesRead + 1 ) & VERTEX_FIFO_MASK ] = reorderedTriangle[ 2 ];
-
-                output.Write( cachedVertexIndices[ compressionCase.vertexOrder[ 0 ] ], CACHED_VERTEX_BITS );
-                output.WriteVInt( ( newVertices - 1 ) - vertexRemap[ reorderedTriangle[ 1 ] ] );
-                output.WriteVInt( ( newVertices - 1 ) - vertexRemap[ reorderedTriangle[ 2 ] ] );
-
-                verticesRead += 2;
-
-                break;
-            }
-            case IB_FREE_FREE_FREE:
-            {
-                vertexFifo[ verticesRead & VERTEX_FIFO_MASK ]         = reorderedTriangle[ 0 ];
-                vertexFifo[ ( verticesRead + 1 ) & VERTEX_FIFO_MASK ] = reorderedTriangle[ 1 ];
-                vertexFifo[ ( verticesRead + 2 ) & VERTEX_FIFO_MASK ] = reorderedTriangle[ 2 ];
-
-                output.WriteVInt( ( newVertices - 1 ) - vertexRemap[ reorderedTriangle[ 0 ] ] );
-                output.WriteVInt( ( newVertices - 1 ) - vertexRemap[ reorderedTriangle[ 1 ] ] );
-                output.WriteVInt( ( newVertices - 1 ) - vertexRemap[ reorderedTriangle[ 2 ] ] );
-
-                verticesRead += 3;
-                break;
-            }
-
-            default: // IB_EDGE_NEW, IB_EDGE_CACHED, IB_EDGE_0_NEW, IB_EDGE_1_NEW
-                break;
-            }
-
-            // populate the edge fifo with the 3 most recent edges
-            edgeFifo[ edgesRead & EDGE_FIFO_MASK ].set( reorderedTriangle[ 0 ], reorderedTriangle[ 1 ] );
-
-            ++edgesRead;
-
-            edgeFifo[ edgesRead & EDGE_FIFO_MASK ].set( reorderedTriangle[ 1 ], reorderedTriangle[ 2 ] );
-
-            ++edgesRead;
-
-            edgeFifo[ edgesRead & EDGE_FIFO_MASK ].set( reorderedTriangle[ 2 ], reorderedTriangle[ 0 ] );
-
-            ++edgesRead;
-        }
-    }
-}
-
-
-
-// Output the compression information for a single vertex, remapping any new vertices and updating the vertex fifo where needed.
-static IBC_INLINE void OutputVertex( uint32_t vertex,
-                                     uint32_t* vertexRemap,
-                                     uint32_t& newVertexCount,
-                                     uint32_t* vertexFifo,
-                                     uint32_t& verticesRead,
-                                     WriteBitstream& output )
-{
-    // Check if a vertex hasn't been remapped, 
-    if ( vertexRemap[ vertex ] == VERTEX_NOT_MAPPED )
-    {
-        // no remap, so remap to the current high watermark and output a new vertex code.
-        vertexRemap[ vertex ] = newVertexCount;
-
-        output.Write( IB_NEW_VERTEX, IB_VERTEX_CODE_BITS );
-
-        ++newVertexCount;
-
-        // new vertices go into the vertex FIFO
-        vertexFifo[ verticesRead & VERTEX_FIFO_MASK ] = vertex;
-
-        ++verticesRead;
-    }
-    else
-    {
-        int32_t lowestVertexCursor = verticesRead >= VERTEX_FIFO_SIZE ? verticesRead - VERTEX_FIFO_SIZE : 0;
-
-        // Probe backwards in the vertex FIFO for a cached vertex
-        for ( int32_t vertexCursor = verticesRead - 1; vertexCursor >= lowestVertexCursor; --vertexCursor )
-        {
-            if ( vertexFifo[ vertexCursor & VERTEX_FIFO_MASK ] == vertex )
-            {
-                // found a cached vertex, so write out the code for a cached vertex, as the relative index into the fifo.
-                output.Write( IB_CACHED_VERTEX, IB_VERTEX_CODE_BITS );
-                output.Write( ( verticesRead - 1 ) - vertexCursor, CACHED_VERTEX_BITS );
-
-                return;
-            }
-        }
-
-        // no cached vertex found, so write out a free vertex 
-        output.Write( IB_FREE_VERTEX, IB_VERTEX_CODE_BITS );
-
-        // free vertices are relative to the latest new vertex.
-        uint32_t vertexOutput = ( newVertexCount - 1 ) - vertexRemap[ vertex ];
-
-        // v-int encode the free vertex index.
-        output.WriteVInt( vertexOutput );
-
-        // free vertices go back into the vertex cache.
-        vertexFifo[ verticesRead & VERTEX_FIFO_MASK ] = vertex;
-            
-        ++verticesRead;
-    }
-
-}
-
-template <typename Ty>
-void CompressIndiceCodes1( const Ty* triangles, 
-                           uint32_t triangleCount, 
-                           uint32_t* vertexRemap, 
-                           uint32_t vertexCount, 
-                           WriteBitstream& output )
-{
-    Edge      edgeFifo[ EDGE_FIFO_SIZE ];
-    uint32_t  vertexFifo[ VERTEX_FIFO_SIZE ];
-
-    uint32_t  edgesRead      = 0;
-    uint32_t  verticesRead   = 0;
-    uint32_t  newVertices    = 0;
-    const Ty* triangleEnd    = triangles + ( triangleCount * 3 );
-
-    assert( vertexCount < 0xFFFFFFFF );
-
-    uint32_t* vertexRemapEnd = vertexRemap + vertexCount;
-
-    // clear the vertex remapping to "not found" value of 0xFFFFFFFF - dirty, but low overhead.
-    for ( uint32_t* remappedVertex = vertexRemap; remappedVertex < vertexRemapEnd; ++remappedVertex )
-    {
-        *remappedVertex = VERTEX_NOT_MAPPED;
-    }
-
-    // iterate through the triangles
-    for ( const Ty* triangle = triangles; triangle < triangleEnd; triangle += 3 )
-    {
-        int32_t lowestEdgeCursor = edgesRead >= EDGE_FIFO_SIZE ? edgesRead - EDGE_FIFO_SIZE : 0;
-        int32_t edgeCursor = edgesRead - 1;
-        bool     foundEdge = false;
-
-        int32_t freeVertex = -1; // should not be negative 1 if found, this is not used as a signal, but for debugging.
-
-        // Probe back through the edge fifo to see if one of the triangle edges is in the FIFO
-        for ( ; edgeCursor >= lowestEdgeCursor; --edgeCursor )
-        {
-            const Edge& edge = edgeFifo[ edgeCursor & VERTEX_FIFO_MASK ];
-
-            // check all the edges in order and save the free vertex.
-            if ( edge.second == triangle[ 0 ] && edge.first == triangle[ 1 ] )
-            {
-                foundEdge  = true;
-                freeVertex = 2;
-                break;
-            }
-            else if ( edge.second == triangle[ 1 ] && edge.first == triangle[ 2 ] )
-            {
-                foundEdge  = true;
-                freeVertex = 0;
-                break;
-            }
-            else if ( edge.second == triangle[ 2 ] && edge.first == triangle[ 0 ] )
-            {
-                foundEdge  = true;
-                freeVertex = 1;
-                break;
-            }
-        }
-
-        // we found an edge so write it out, then output the vertex
-        if ( foundEdge )
-        {
-            output.Write( IB_CACHED_EDGE, IB_VERTEX_CODE_BITS );
-            output.Write( ( edgesRead - 1 ) - edgeCursor, CACHED_EDGE_BITS );
-
-            const Edge& edge = edgeFifo[ edgeCursor & EDGE_FIFO_MASK ];
-
-            OutputVertex( triangle[ freeVertex ], vertexRemap, newVertices, vertexFifo, verticesRead, output );
-
-            // edge is in reverse order to last triangle it occured on (and it will only be a match if this is the case).
-            // so put the vertices into the fifo in that order.
-            vertexFifo[ verticesRead & VERTEX_FIFO_MASK ] = edge.second;
-
-            ++verticesRead;
-
-            vertexFifo[ verticesRead & VERTEX_FIFO_MASK ] = edge.first;
-
-            ++verticesRead;
-
-            // Populate the edge fifo with the the remaining edges
-            // Note - the winding order is important as we'll need to re-produce this on decompression.
-            // The edges are put in as if the found edge is the first edge in the triangle (which it will be when we
-            // reconstruct).
-            switch ( freeVertex )
-            {
-            case 0:
-
-                edgeFifo[ edgesRead & EDGE_FIFO_MASK ].set( triangle[ 2 ], triangle[ 0 ] );
-
-                ++edgesRead;
-
-                edgeFifo[ edgesRead & EDGE_FIFO_MASK ].set( triangle[ 0 ], triangle[ 1 ] );
-
-                ++edgesRead;
-                break;
-
-            case 1:
-
-                edgeFifo[ edgesRead & EDGE_FIFO_MASK ].set( triangle[ 0 ], triangle[ 1 ] );
-
-                ++edgesRead;
-
-                edgeFifo[ edgesRead & EDGE_FIFO_MASK ].set( triangle[ 1 ], triangle[ 2 ] );
-
-                ++edgesRead;
-                break;
-
-            case 2:
-
-                edgeFifo[ edgesRead & EDGE_FIFO_MASK ].set( triangle[ 1 ], triangle[ 2 ] );
-
-                ++edgesRead;
-
-                edgeFifo[ edgesRead & EDGE_FIFO_MASK ].set( triangle[ 2 ], triangle[ 0 ] );
-
-                ++edgesRead;
-                break;
-            }
-        }
-        else
-        {
-            // no edge, so we need to output all the vertices.
-            OutputVertex( triangle[ 0 ], vertexRemap, newVertices, vertexFifo, verticesRead, output );
-            OutputVertex( triangle[ 1 ], vertexRemap, newVertices, vertexFifo, verticesRead, output );
-            OutputVertex( triangle[ 2 ], vertexRemap, newVertices, vertexFifo, verticesRead, output );
-
-            // populate the edge fifo with the 3 most recent edges
-            edgeFifo[ edgesRead & EDGE_FIFO_MASK ].set( triangle[ 0 ], triangle[ 1 ] );
-
-            ++edgesRead;
-
-            edgeFifo[ edgesRead & EDGE_FIFO_MASK ].set( triangle[ 1 ], triangle[ 2 ] );
-
-            ++edgesRead;
-
-            edgeFifo[ edgesRead & EDGE_FIFO_MASK ].set( triangle[ 2 ], triangle[ 0 ] );
-
-            ++edgesRead;
-        }
-    }
-}
-
-// Detects if there are any degenerate triangles in a set of triangles, where there is 1 or more duplicate vertices.
-template <typename Ty>
-bool ContainsDegenerates( const Ty* triangles, uint32_t triangleCount )
-{
-    const Ty* triangleEnd = triangles + ( triangleCount * 3 );
-    bool      result      = false;
-
-    for ( const Ty* triangle = triangles; triangle < triangleEnd; triangle += 3 )
-    {
-        if ( triangle[ 0 ] == triangle[ 1 ] || triangle[ 0 ] == triangle[ 2 ] || triangle[ 1 ] == triangle[ 2 ] )
-        {
-            result = true;
-            break;
-        }
-    }
-
-    return result;
-}
-
-template <typename Ty>
-void CompressIndexBuffer( const Ty* triangles,
-                          uint32_t triangleCount,
-                          uint32_t* vertexRemap,
-                          uint32_t vertexCount,
-                          IndexBufferCompressionFormat format,
-                          WriteBitstream& output )
-{
-    switch ( format )
-    {
-    case IBCF_PER_INDICE_1:
-
-        output.WriteVInt( IBCF_PER_INDICE_1 );
-        CompressIndiceCodes1<Ty>( triangles, triangleCount, vertexRemap, vertexCount, output );
-        break;
-
-    case IBCF_PER_TRIANGLE_1:
-
-        output.WriteVInt( IBCF_PER_TRIANGLE_1 );
-        CompressTriangleCodes1<Ty>( triangles, triangleCount, vertexRemap, vertexCount, output );
-        break;
-
-    case IBCF_AUTO:
-
-        if ( ContainsDegenerates( triangles, triangleCount ) )
-        {
-            output.WriteVInt( IBCF_PER_INDICE_1 );
-            CompressIndiceCodes1<Ty>( triangles, triangleCount, vertexRemap, vertexCount, output );
-        }
-        else
-        {
-            output.WriteVInt( IBCF_PER_TRIANGLE_1 );
-            CompressTriangleCodes1<Ty>( triangles, triangleCount, vertexRemap, vertexCount, output );
-        }
-
-        break;
-    }
-}
-
-void CompressIndexBuffer( const uint16_t* triangles,
-                          uint32_t triangleCount,
-                          uint32_t* vertexRemap,
-                          uint32_t vertexCount, 
-                          IndexBufferCompressionFormat format,
-                          WriteBitstream& output )
-{
-
-    CompressIndexBuffer<uint16_t>( triangles, triangleCount, vertexRemap, vertexCount, format, output );
-}
-
-void CompressIndexBuffer( const uint32_t* triangles,
-                          uint32_t triangleCount,
-                          uint32_t* vertexRemap,
-                          uint32_t vertexCount,
-                          IndexBufferCompressionFormat format,
-                          WriteBitstream& output )
-{
-    CompressIndexBuffer<uint32_t>( triangles, triangleCount, vertexRemap, vertexCount, format, output );
-}
-

3rdparty/ib-compress/indexbuffercompression.h

@@ -1,56 +0,0 @@
-/*
-Copyright (c) 2014-2015, Conor Stokes
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
-
-1. Redistributions of source code must retain the above copyright notice, this
-list of conditions and the following disclaimer.
-2. Redistributions in binary form must reproduce the above copyright notice,
-this list of conditions and the following disclaimer in the documentation
-and/or other materials provided with the distribution.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
-ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
-#ifndef INDEX_BUFFER_COMPRESSION_H__
-#define INDEX_BUFFER_COMPRESSION_H__
-#pragma once
-
-#include <stdint.h>
-#include "writebitstream.h"
-#include "indexbuffercompressionformat.h"
-
-// Compress an index buffer, writing the results out to a bitstream and providing a vertex remapping (which will be in pre-transform cache optimised
-// order).
-//
-// It works by outputting a code (along with any required index symbols) per vertex.
-//
-// Parameters: 
-//     [in]  triangles      - A typical triangle list index buffer (3 indices to vertices per triangle). 16 bit indices.
-//     [in]  triangle count - The number of triangles to process.
-//     [out] vertexRemap    - This will be populated with re-mappings that map old vertices to new vertex locations (a new ordering),
-//                            where indexing with the old vertex index will get you the new one. Vertices that are unused will 
-//                            be mapped to 0xFFFFFFFF.
-//                            You should re-order the vertices and removed unused ones based on the vertex remap, instead of storing
-//                            the remap. 
-//                            It should be allocated as a with at least vertexCount entries.
-//     [in] vertexCount     - The number of vertices in the mesh. This should be less than 0xFFFFFFFF/2^32 - 1.
-//     [in] format          - The compression format to use for encoding - note the format will be encoded with the compressed data so the decompressor can select the correct algorithm.            
-//     [in] output          - The stream that the compressed data will be written to. Note that we will not flush/finish the stream
-//                            in case something else is going to be written after, so WriteBitstream::Finish will need to be called after this.
-void CompressIndexBuffer( const uint16_t* triangles, uint32_t triangleCount, uint32_t* vertexRemap, uint32_t vertexCount, IndexBufferCompressionFormat format, WriteBitstream& output );
-
-// Same as above but 32bit indices.
-void CompressIndexBuffer( const uint32_t* triangles, uint32_t triangleCount, uint32_t* vertexRemap, uint32_t vertexCount, IndexBufferCompressionFormat format, WriteBitstream& output );
-
-#endif // -- INDEX_BUFFER_COMPRESSION_H__

3rdparty/ib-compress/indexbuffercompressionformat.h

@@ -1,42 +0,0 @@
-/*
-Copyright (c) 2014-2015, Conor Stokes
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
-
-1. Redistributions of source code must retain the above copyright notice, this
-list of conditions and the following disclaimer.
-2. Redistributions in binary form must reproduce the above copyright notice,
-this list of conditions and the following disclaimer in the documentation
-and/or other materials provided with the distribution.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
-ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
-#ifndef INDEX_BUFFER_COMPRESSION_FORMAT_H__
-#define INDEX_BUFFER_COMPRESSION_FORMAT_H__
-#pragma once
-
-enum IndexBufferCompressionFormat
-{
-    // Per indice encoding - handles degenerates, but has worse compression/decompression speed and compression.
-    IBCF_PER_INDICE_1 = 0,
-
-    // Per triangle encoding - better compression/speed, does not handle degenerates.
-    IBCF_PER_TRIANGLE_1 = 1,
-
-    // Automatically pick the best encoding dependent on whether degenerate triangles are detected in the mesh.
-    // Will take longer to compress (due to the degenerate triangle check).
-    IBCF_AUTO = 2
-};
-
-#endif // -- INDEX_BUFFER_COMPRESSION_FORMAT_H__

3rdparty/ib-compress/indexbufferdecompression.cpp

@@ -1,481 +0,0 @@
-/*
-Copyright (c) 2014-2015, Conor Stokes
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
-
-1. Redistributions of source code must retain the above copyright notice, this
-list of conditions and the following disclaimer.
-2. Redistributions in binary form must reproduce the above copyright notice,
-this list of conditions and the following disclaimer in the documentation
-and/or other materials provided with the distribution.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
-ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
-#include "indexbufferdecompression.h"
-#include "readbitstream.h"
-#include "indexcompressionconstants.h"
-#include "indexbuffercompressionformat.h"
-#include <assert.h>
-
-template <typename Ty>
-void DecompressTriangleCodes1( Ty* triangles, uint32_t triangleCount, ReadBitstream& input )
-{
-    Edge      edgeFifo[ EDGE_FIFO_SIZE ];
-    uint32_t  vertexFifo[ VERTEX_FIFO_SIZE ];
-
-    uint32_t  edgesRead = 0;
-    uint32_t  verticesRead = 0;
-    uint32_t  newVertices = 0;
-    const Ty* triangleEnd = triangles + ( triangleCount * 3 );
-
-    // iterate through the triangles
-    for ( Ty* triangle = triangles; triangle < triangleEnd; triangle += 3 )
-    {
-        IndexBufferTriangleCodes code      = static_cast< IndexBufferTriangleCodes >( input.Read( IB_TRIANGLE_CODE_BITS ) );
-
-        switch ( code )
-        {
-        case IB_EDGE_NEW:
-        {
-            uint32_t    edgeFifoIndex = input.Read( CACHED_EDGE_BITS );
-
-            const Edge& edge          = edgeFifo[ ( ( edgesRead - 1 ) - edgeFifoIndex ) & EDGE_FIFO_MASK ];
-
-            triangle[ 0 ] = static_cast< Ty >( edge.second );
-            triangle[ 1 ] = static_cast< Ty >( edge.first );
-
-            vertexFifo[ verticesRead & EDGE_FIFO_MASK ] =
-            triangle[ 2 ]                               = static_cast< Ty >( newVertices );
-
-            ++newVertices;
-            ++verticesRead;
-
-            break;
-        }
-
-        case IB_EDGE_CACHED:
-        {
-            uint32_t    edgeFifoIndex   = input.Read( CACHED_EDGE_BITS );
-            uint32_t    vertexFifoIndex = input.Read( CACHED_VERTEX_BITS );
-
-            const Edge& edge            = edgeFifo[ ( ( edgesRead - 1 ) - edgeFifoIndex ) & EDGE_FIFO_MASK ];
-
-            triangle[ 0 ] = static_cast< Ty >( edge.second );
-            triangle[ 1 ] = static_cast< Ty >( edge.first );
-            triangle[ 2 ] = static_cast< Ty >( vertexFifo[ ( ( verticesRead - 1 ) - vertexFifoIndex ) & VERTEX_FIFO_MASK ] );
-            
-            break;
-        }
-        case IB_EDGE_FREE:
-        {
-            uint32_t    edgeFifoIndex   = input.Read( CACHED_EDGE_BITS );
-            uint32_t    relativeVertex  = input.ReadVInt();
-
-            const Edge& edge            = edgeFifo[ ( ( edgesRead - 1 ) - edgeFifoIndex ) & EDGE_FIFO_MASK ];
-
-            triangle[ 0 ] = static_cast< Ty >( edge.second );
-            triangle[ 1 ] = static_cast< Ty >( edge.first );
-            
-            vertexFifo[ verticesRead & VERTEX_FIFO_MASK ] =
-            triangle[ 2 ]                                 = static_cast< Ty >( ( newVertices - 1 ) - relativeVertex );
-            ++verticesRead;
-            
-            break;
-        }
-        case IB_NEW_NEW_NEW:
-        {
-            vertexFifo[ verticesRead & VERTEX_FIFO_MASK ]         =
-            triangle[ 0 ]                                         = static_cast< Ty >( newVertices );
-            vertexFifo[ ( verticesRead + 1 ) & VERTEX_FIFO_MASK ] =
-            triangle[ 1 ]                                         = static_cast< Ty >( newVertices + 1 );
-            vertexFifo[ ( verticesRead + 2 ) & VERTEX_FIFO_MASK ] =
-            triangle[ 2 ]                                         = static_cast< Ty >( newVertices + 2 );
-
-            newVertices  += 3;
-            verticesRead += 3;
-
-            edgeFifo[ edgesRead & EDGE_FIFO_MASK ].set( triangle[ 0 ], triangle[ 1 ] );
-
-            ++edgesRead;
-            break;
-        }
-        case IB_NEW_NEW_CACHED:
-        {
-            uint32_t vertexFifoIndex = input.Read( CACHED_VERTEX_BITS );
-
-            triangle[ 2 ]                                         = static_cast< Ty >( vertexFifo[ ( ( verticesRead - 1 ) - vertexFifoIndex ) & VERTEX_FIFO_MASK ] );
-            vertexFifo[ verticesRead & VERTEX_FIFO_MASK ]         =
-            triangle[ 0 ]                                         = static_cast< Ty >( newVertices );
-            vertexFifo[ ( verticesRead + 1 ) & VERTEX_FIFO_MASK ] =
-            triangle[ 1 ]                                         = static_cast< Ty >( newVertices + 1 );
-
-            verticesRead += 2;
-            newVertices  += 2;
-
-            edgeFifo[ edgesRead & EDGE_FIFO_MASK ].set( triangle[ 0 ], triangle[ 1 ] );
-
-            ++edgesRead;
-            break;
-        }
-        case IB_NEW_NEW_FREE:
-        {
-            uint32_t relativeVertex = input.ReadVInt();
-
-            vertexFifo[ verticesRead & VERTEX_FIFO_MASK ]         =
-            triangle[ 0 ]                                         = static_cast< Ty >( newVertices );
-            vertexFifo[ ( verticesRead + 1 ) & VERTEX_FIFO_MASK ] =
-            triangle[ 1 ]                                         = static_cast< Ty >( newVertices + 1 );
-            vertexFifo[ ( verticesRead + 2 ) & VERTEX_FIFO_MASK ] =
-            triangle[ 2 ]                                         = static_cast< Ty >( ( newVertices - 1 ) - relativeVertex );
-
-            newVertices  += 2;
-            verticesRead += 3;
-
-            edgeFifo[ edgesRead & EDGE_FIFO_MASK ].set( triangle[ 0 ], triangle[ 1 ] );
-
-            ++edgesRead;
-            break;
-        }
-        case IB_NEW_CACHED_CACHED:
-        {
-            uint32_t vertex1FifoIndex = input.Read( CACHED_VERTEX_BITS );
-            uint32_t vertex2FifoIndex = input.Read( CACHED_VERTEX_BITS );
-
-            triangle[ 1 ]                                 = static_cast< Ty >(  vertexFifo[ ( ( verticesRead - 1 ) - vertex1FifoIndex ) & VERTEX_FIFO_MASK ] );
-            triangle[ 2 ]                                 = static_cast< Ty >( vertexFifo[ ( ( verticesRead - 1 ) - vertex2FifoIndex ) & VERTEX_FIFO_MASK ] );
-            vertexFifo[ verticesRead & VERTEX_FIFO_MASK ] =
-            triangle[ 0 ]                                 = static_cast< Ty >( newVertices );
-
-            ++verticesRead;
-            ++newVertices;
-
-            edgeFifo[ edgesRead & EDGE_FIFO_MASK ].set( triangle[ 0 ], triangle[ 1 ] );
-
-            ++edgesRead;
-            break;
-        }
-        case IB_NEW_CACHED_FREE:
-        {
-            uint32_t vertexFifoIndex = input.Read( CACHED_VERTEX_BITS );
-            uint32_t relativeVertex  = input.ReadVInt();
-
-            triangle[ 1 ]                                         = static_cast< Ty >( vertexFifo[ ( ( verticesRead - 1 ) - vertexFifoIndex ) & VERTEX_FIFO_MASK ] );
-            vertexFifo[ verticesRead & VERTEX_FIFO_MASK ]         =
-            triangle[ 0 ]                                         = static_cast< Ty >( newVertices );
-            vertexFifo[ ( verticesRead + 1 ) & VERTEX_FIFO_MASK ] =
-            triangle[ 2 ]                                         = static_cast< Ty >( ( newVertices - 1 ) - relativeVertex );
-
-            verticesRead += 2;
-            ++newVertices;
-
-            edgeFifo[ edgesRead & EDGE_FIFO_MASK ].set( triangle[ 0 ], triangle[ 1 ] );
-
-            ++edgesRead;
-            break;
-        }
-        case IB_NEW_FREE_CACHED:
-        {
-            uint32_t relativeVertex  = input.ReadVInt();
-            uint32_t vertexFifoIndex = input.Read( CACHED_VERTEX_BITS );
-
-            triangle[ 2 ]                                         = static_cast< Ty >( vertexFifo[ ( ( verticesRead - 1 ) - vertexFifoIndex ) & VERTEX_FIFO_MASK ] ); 
-            vertexFifo[ verticesRead & VERTEX_FIFO_MASK ]         =
-            triangle[ 0 ]                                         = static_cast< Ty >( newVertices );
-            vertexFifo[ ( verticesRead + 1 ) & VERTEX_FIFO_MASK ] =
-            triangle[ 1 ]                                         = static_cast< Ty >( ( newVertices - 1 ) - relativeVertex );
-
-            verticesRead += 2;
-            ++newVertices;
-
-            edgeFifo[ edgesRead & EDGE_FIFO_MASK ].set( triangle[ 0 ], triangle[ 1 ] );
-
-            ++edgesRead;
-            break;
-        }
-        case IB_NEW_FREE_FREE:
-        {
-            uint32_t relativeVertex1  = input.ReadVInt();
-            uint32_t relativeVertex2  = input.ReadVInt();
-
-            vertexFifo[ verticesRead & VERTEX_FIFO_MASK ]         =
-            triangle[ 0 ]                                         = static_cast< Ty >( newVertices );
-            vertexFifo[ ( verticesRead + 1 ) & VERTEX_FIFO_MASK ] =
-            triangle[ 1 ]                                         = static_cast< Ty >( ( newVertices - 1 ) - relativeVertex1 );
-            vertexFifo[ ( verticesRead + 2 ) & VERTEX_FIFO_MASK ] =
-            triangle[ 2 ]                                         = static_cast< Ty >( ( newVertices - 1 ) - relativeVertex2 );
-
-            verticesRead += 3;
-            ++newVertices;
-
-            edgeFifo[ edgesRead & EDGE_FIFO_MASK ].set( triangle[ 0 ], triangle[ 1 ] );
-
-            ++edgesRead;
-
-            break;
-        }
-        case IB_CACHED_CACHED_CACHED:
-        {
-            uint32_t vertex0FifoIndex = input.Read( CACHED_VERTEX_BITS );
-            uint32_t vertex1FifoIndex = input.Read( CACHED_VERTEX_BITS );
-            uint32_t vertex2FifoIndex = input.Read( CACHED_VERTEX_BITS );
-
-            triangle[ 0 ] = static_cast< Ty >( vertexFifo[ ( ( verticesRead - 1 ) - vertex0FifoIndex ) & VERTEX_FIFO_MASK ] );
-            triangle[ 1 ] = static_cast< Ty >( vertexFifo[ ( ( verticesRead - 1 ) - vertex1FifoIndex ) & VERTEX_FIFO_MASK ] );
-            triangle[ 2 ] = static_cast< Ty >( vertexFifo[ ( ( verticesRead - 1 ) - vertex2FifoIndex ) & VERTEX_FIFO_MASK ] );
-
-            edgeFifo[ edgesRead & EDGE_FIFO_MASK ].set( triangle[ 0 ], triangle[ 1 ] );
-
-            ++edgesRead;
-            break;
-        }
-        case IB_CACHED_CACHED_FREE:
-        {
-            uint32_t vertex0FifoIndex = input.Read( CACHED_VERTEX_BITS );
-            uint32_t vertex1FifoIndex = input.Read( CACHED_VERTEX_BITS );
-            uint32_t relativeVertex2  = input.ReadVInt();
-
-            triangle[ 0 ]                                 = static_cast< Ty >( vertexFifo[ ( ( verticesRead - 1 ) - vertex0FifoIndex ) & VERTEX_FIFO_MASK ] );
-            triangle[ 1 ]                                 = static_cast< Ty >( vertexFifo[ ( ( verticesRead - 1 ) - vertex1FifoIndex ) & VERTEX_FIFO_MASK ] );
-
-            vertexFifo[ verticesRead & VERTEX_FIFO_MASK ] =
-            triangle[ 2 ]                                 = static_cast< Ty >( ( newVertices - 1 ) - relativeVertex2 );
-
-            ++verticesRead;
-
-            edgeFifo[ edgesRead & EDGE_FIFO_MASK ].set( triangle[ 0 ], triangle[ 1 ] );
-
-            ++edgesRead;
-
-            break;
-        }
-        case IB_CACHED_FREE_FREE:
-        {
-            uint32_t vertex0FifoIndex = input.Read( CACHED_VERTEX_BITS );
-            uint32_t relativeVertex1  = input.ReadVInt();
-            uint32_t relativeVertex2  = input.ReadVInt();
-
-            triangle[ 0 ]                                         = static_cast< Ty >( vertexFifo[ ( ( verticesRead - 1 ) - vertex0FifoIndex ) & VERTEX_FIFO_MASK ] );
-
-            vertexFifo[ verticesRead & VERTEX_FIFO_MASK ]         =
-            triangle[ 1 ]                                         = static_cast< Ty >( ( newVertices - 1 ) - relativeVertex1 );
-            vertexFifo[ ( verticesRead + 1 ) & VERTEX_FIFO_MASK ] =
-            triangle[ 2 ]                                         = static_cast< Ty >( ( newVertices - 1 ) - relativeVertex2 );
-
-            verticesRead += 2;
-
-            edgeFifo[ edgesRead & EDGE_FIFO_MASK ].set( triangle[ 0 ], triangle[ 1 ] );
-
-            ++edgesRead;
-
-            break;
-        }
-        case IB_FREE_FREE_FREE:
-        {
-            uint32_t relativeVertex0 = input.ReadVInt();
-            uint32_t relativeVertex1 = input.ReadVInt();
-            uint32_t relativeVertex2 = input.ReadVInt();
-
-            vertexFifo[ verticesRead & VERTEX_FIFO_MASK ]         =
-            triangle[ 0 ]                                         = static_cast< Ty >( ( newVertices - 1 ) - relativeVertex0 );
-            vertexFifo[ ( verticesRead + 1 ) & VERTEX_FIFO_MASK ] =
-            triangle[ 1 ]                                         = static_cast< Ty >( ( newVertices - 1 ) - relativeVertex1 );
-            vertexFifo[ ( verticesRead + 2 ) & VERTEX_FIFO_MASK ] =
-            triangle[ 2 ]                                         = static_cast< Ty >( ( newVertices - 1 ) - relativeVertex2 );
-
-            verticesRead += 3;
-
-            edgeFifo[ edgesRead & EDGE_FIFO_MASK ].set( triangle[ 0 ], triangle[ 1 ] );
-
-            ++edgesRead;
-
-            break;
-        }
-        case IB_EDGE_0_NEW:
-        {
-            const Edge& edge = edgeFifo[ ( edgesRead - 1 ) & EDGE_FIFO_MASK ];
-
-            triangle[ 0 ]                               = static_cast< Ty >( edge.second );
-            triangle[ 1 ]                               = static_cast< Ty >( edge.first );
-
-            vertexFifo[ verticesRead & EDGE_FIFO_MASK ] =
-            triangle[ 2 ]                               = static_cast< Ty >( newVertices );
-
-            ++newVertices;
-            ++verticesRead;
-            break;
-        }
-        case IB_EDGE_1_NEW:
-        {
-            const Edge& edge = edgeFifo[ ( ( edgesRead - 1 ) - 1 ) & EDGE_FIFO_MASK ];
-
-            triangle[ 0 ]                               = static_cast< Ty >( edge.second );
-            triangle[ 1 ]                               = static_cast< Ty >( edge.first );
-
-            vertexFifo[ verticesRead & EDGE_FIFO_MASK ] =
-            triangle[ 2 ]                               = static_cast< Ty >( newVertices );
-
-            ++newVertices;
-            ++verticesRead;
-            break;
-        }
-        }
-
-        edgeFifo[ edgesRead & EDGE_FIFO_MASK ].set( triangle[ 1 ], triangle[ 2 ] );
-
-        ++edgesRead;
-
-        edgeFifo[ edgesRead & EDGE_FIFO_MASK ].set( triangle[ 2 ], triangle[ 0 ] );
-
-        ++edgesRead;
-    }
-}
-
-template <typename Ty>
-void DecompressIndiceCodes1( Ty* triangles, uint32_t triangleCount, ReadBitstream& input )
-{
-    Edge      edgeFifo[ EDGE_FIFO_SIZE ];
-    uint32_t  vertexFifo[ VERTEX_FIFO_SIZE ];
-
-    uint32_t  edgesRead    = 0;
-    uint32_t  verticesRead = 0;
-    uint32_t  newVertices  = 0;
-    const Ty* triangleEnd = triangles + ( triangleCount * 3 );
-
-    // iterate through the triangles
-    for ( Ty* triangle = triangles; triangle < triangleEnd; triangle += 3 )
-    {
-        int  readVertex = 0;
-        bool skipFirstEdge = false;
-
-        while ( readVertex < 3 )
-        {
-            IndexBufferCodes code = static_cast< IndexBufferCodes >( input.Read( IB_VERTEX_CODE_BITS ) );
-
-            switch ( code )
-            {
-            case IB_NEW_VERTEX:
-
-                vertexFifo[ verticesRead & VERTEX_FIFO_MASK ] =
-                triangle[ readVertex ]                        = static_cast< Ty >(  newVertices );
-
-                ++readVertex;
-                ++verticesRead;
-                ++newVertices;
-
-                break;
-
-            case IB_CACHED_EDGE:
-
-            {
-                assert( readVertex == 0 );
-
-                uint32_t    fifoIndex = input.Read( CACHED_EDGE_BITS );
-                const Edge& edge      = edgeFifo[ ( ( edgesRead - 1 ) - fifoIndex ) & EDGE_FIFO_MASK ];
-
-                triangle[ 0 ] = static_cast< Ty >( edge.second );
-                triangle[ 1 ] = static_cast< Ty >( edge.first );
-
-                readVertex    += 2;
-                skipFirstEdge  = true;
-
-                break;
-            }
-
-            case IB_CACHED_VERTEX:
-
-            {
-                uint32_t fifoIndex     = input.Read( CACHED_VERTEX_BITS );
-                
-                triangle[ readVertex ] = static_cast< Ty >( vertexFifo[ ( ( verticesRead - 1 ) - fifoIndex ) & VERTEX_FIFO_MASK ] );
-
-                ++readVertex;
-
-                break;
-            }
-
-            case IB_FREE_VERTEX:
-
-            {
-                uint32_t relativeVertex = input.ReadVInt();
-
-                uint32_t vertex = ( newVertices - 1 ) - relativeVertex;
-
-                vertexFifo[ verticesRead & VERTEX_FIFO_MASK ] =
-                triangle[ readVertex ]                        = static_cast< Ty >( vertex );
-
-                ++verticesRead;
-                ++readVertex;
-                break;
-            }
-            }
-        }
-
-        if ( !skipFirstEdge )
-        {
-            edgeFifo[ edgesRead & EDGE_FIFO_MASK ].set( triangle[ 0 ], triangle[ 1 ] );
-
-            ++edgesRead;
-        }
-        else // first 2 verts were an edge case, so insert them into the vertex fifo. 
-        {
-            vertexFifo[ verticesRead & EDGE_FIFO_MASK ] = triangle[ 0 ];
-
-            ++verticesRead;
-
-            vertexFifo[ verticesRead & EDGE_FIFO_MASK ] = triangle[ 1 ];
-
-            ++verticesRead;
-        }
-
-        edgeFifo[ edgesRead & EDGE_FIFO_MASK ].set( triangle[ 1 ], triangle[ 2 ] );
-
-        ++edgesRead;
-
-        edgeFifo[ edgesRead & EDGE_FIFO_MASK ].set( triangle[ 2 ], triangle[ 0 ] );
-
-        ++edgesRead;
-    }
-}
-
-template < typename Ty >
-void DecompressIndexBuffer( Ty* triangles, uint32_t triangleCount, ReadBitstream& input )
-{
-    IndexBufferCompressionFormat format = static_cast< IndexBufferCompressionFormat >( input.ReadVInt() );
-
-    switch ( format )
-    {
-    case IBCF_PER_INDICE_1:
-
-        DecompressIndiceCodes1<Ty>( triangles, triangleCount, input );
-        break;
-
-    case IBCF_PER_TRIANGLE_1:
-
-        DecompressTriangleCodes1<Ty>( triangles, triangleCount, input );
-        break;
-
-    default: // IBCF_AUTO:
-        break;
-    }
-}
-
-void DecompressIndexBuffer( uint32_t* triangles, uint32_t triangleCount, ReadBitstream& input )
-{
-    DecompressIndexBuffer<uint32_t>( triangles, triangleCount, input );
-}
-
-void DecompressIndexBuffer( uint16_t* triangles, uint32_t triangleCount, ReadBitstream& input )
-{
-    DecompressIndexBuffer<uint16_t>( triangles, triangleCount, input );
-}

3rdparty/ib-compress/indexbufferdecompression.h

@@ -1,43 +0,0 @@
-/*
-Copyright (c) 2014-2015, Conor Stokes
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
-
-1. Redistributions of source code must retain the above copyright notice, this
-list of conditions and the following disclaimer.
-2. Redistributions in binary form must reproduce the above copyright notice,
-this list of conditions and the following disclaimer in the documentation
-and/or other materials provided with the distribution.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
-ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
-#ifndef INDEX_BUFFER_DECOMPRESSION_H__
-#define INDEX_BUFFER_DECOMPRESSION_H__
-#pragma once
-
-#include <stdint.h>
-#include "readbitstream.h"
-
-// Compress an index buffer, writing the results out to a bitstream and providing a vertex remapping (which will be in pre-transform cache optimised
-// order.
-// Parameters: 
-//     [out] triangles      - Triangle list index buffer (3 indices to vertices per triangle), output from the decompression - 16bit indices
-//     [in]  triangle count - The number of triangles to decompress.
-//     [in]  input          - The bit stream that the compressed data will be read from.
-void DecompressIndexBuffer( uint16_t* triangles, uint32_t triangleCount, ReadBitstream& input );
-
-// Same as above but 32 bit indices.
-void DecompressIndexBuffer( uint32_t* triangles, uint32_t triangleCount, ReadBitstream& input );
-
-#endif // -- INDEX_BUFFER_DECOMPRESSION_H__

3rdparty/ib-compress/indexcompressionconstants.h

@@ -1,94 +0,0 @@
-/*
-Copyright (c) 2014-2015, Conor Stokes
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
-
-1. Redistributions of source code must retain the above copyright notice, this
-list of conditions and the following disclaimer.
-2. Redistributions in binary form must reproduce the above copyright notice,
-this list of conditions and the following disclaimer in the documentation
-and/or other materials provided with the distribution.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
-ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
-#ifndef INDEX_COMPRESSION_CONSTANTS_H__
-#define INDEX_COMPRESSION_CONSTANTS_H__
-#pragma once
-
-#include <stdint.h>
-
-// Constant fifo and code sizes.
-const int VERTEX_FIFO_SIZE      = 32;
-const int VERTEX_FIFO_MASK      = VERTEX_FIFO_SIZE - 1;
-const int EDGE_FIFO_SIZE        = 32;
-const int EDGE_FIFO_MASK        = EDGE_FIFO_SIZE - 1;
-const int CACHED_EDGE_BITS      = 5;
-const int CACHED_VERTEX_BITS    = 5;
-
-const int IB_VERTEX_CODE_BITS   = 2;
-
-const int IB_TRIANGLE_CODE_BITS = 4;
-
-// Edge in the edge fifo.
-struct Edge
-{
-    void set( uint32_t f, uint32_t s )
-    {
-        first  = f;
-        second = s;
-    }
-
-    uint32_t first;
-    uint32_t second;
-};
-
-// These are the vertex/edge codes for CompressIndexBuffer
-enum IndexBufferCodes
-{
-    // Represents a yet un-seen vertex.
-    IB_NEW_VERTEX    = 0,
-
-    // Represents 2 vertices on an edge in the edge fifo, which will be used as the first 2 vertices of the
-    // triangle.
-    IB_CACHED_EDGE   = 1,
-    
-    // Represents a vertex that has been seen recently and is still in the vertex fifo.
-    IB_CACHED_VERTEX = 2,
-
-    // Represents a vertex that has been seen 
-    IB_FREE_VERTEX   = 3
-};
-
-// These are the triangle codes for CompressIndexBuffer2
-enum IndexBufferTriangleCodes
-{
-    IB_EDGE_NEW = 0,
-    IB_EDGE_CACHED = 1,
-    IB_EDGE_FREE = 2,
-    IB_NEW_NEW_NEW = 3,
-    IB_NEW_NEW_CACHED = 4,
-    IB_NEW_NEW_FREE = 5,
-    IB_NEW_CACHED_CACHED = 6,
-    IB_NEW_CACHED_FREE= 7,
-    IB_NEW_FREE_CACHED = 8,
-    IB_NEW_FREE_FREE = 9,
-    IB_CACHED_CACHED_CACHED = 10,
-    IB_CACHED_CACHED_FREE = 11,
-    IB_CACHED_FREE_FREE = 12,
-    IB_FREE_FREE_FREE = 13,
-    IB_EDGE_0_NEW = 14,
-    IB_EDGE_1_NEW = 15
-};
-
-#endif 

3rdparty/ib-compress/readbitstream.h

@@ -1,145 +0,0 @@
-/*
-Copyright (c) 2014-2015, Conor Stokes
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
-
-1. Redistributions of source code must retain the above copyright notice, this
-list of conditions and the following disclaimer.
-2. Redistributions in binary form must reproduce the above copyright notice,
-this list of conditions and the following disclaimer in the documentation
-and/or other materials provided with the distribution.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
-ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
-#ifndef READ_BIT_STREAM_H__
-#define READ_BIT_STREAM_H__
-#pragma once
-
-#include <stdint.h>
-#include <stdlib.h>
-
-#ifdef _MSC_VER
-
-#define RBS_INLINE __forceinline
-
-#else
-
-#define RBS_INLINE inline
-
-#endif 
-
-// Very simple reader bitstream, note it does not do any overflow checking, etc.
-class ReadBitstream
-{
-public:
-
-    // Construct the bitstream with a fixed byte buffer (which should be padded out to multiples of 8 bytes, as we read in 8 byte chunks).
-    ReadBitstream( const uint8_t* buffer, size_t bufferSize );
-
-    ~ReadBitstream() {}
-
-    // Read a number of bits
-    uint32_t Read( uint32_t bitcount );
-
-    // Get the buffer size of this in bytes
-    size_t Size() const { return m_bufferSize; }
-
-    uint32_t ReadVInt();
-
-private:
-
-    uint64_t m_bitBuffer;
-
-    const uint8_t* m_buffer;
-    const uint8_t* m_cursor;
-
-    size_t m_bufferSize;
-    uint32_t m_bitsLeft;
-
-};
-
-inline ReadBitstream::ReadBitstream( const uint8_t* buffer, size_t bufferSize )
-{
-    m_cursor     =
-    m_buffer     = buffer;
-    m_bufferSize = bufferSize;
-
-    if ( bufferSize >= 8 )
-    {
-        m_bitBuffer = m_cursor[ 0 ];
-        m_bitBuffer |= static_cast< uint64_t >( m_cursor[ 1 ] ) << 8;
-        m_bitBuffer |= static_cast< uint64_t >( m_cursor[ 2 ] ) << 16;
-        m_bitBuffer |= static_cast< uint64_t >( m_cursor[ 3 ] ) << 24;
-        m_bitBuffer |= static_cast< uint64_t >( m_cursor[ 4 ] ) << 32;
-        m_bitBuffer |= static_cast< uint64_t >( m_cursor[ 5 ] ) << 40;
-        m_bitBuffer |= static_cast< uint64_t >( m_cursor[ 6 ] ) << 48;
-        m_bitBuffer |= static_cast< uint64_t >( m_cursor[ 7 ] ) << 56;
-
-        m_cursor += 8;
-        m_bitsLeft = 64;
-    }
-    else
-    {
-        m_bitsLeft = 0;
-    }
-}
-
-RBS_INLINE uint32_t ReadBitstream::Read( uint32_t bitCount )
-{
-    uint64_t mask   = ( uint64_t( 1 ) << bitCount ) - 1;
-    uint32_t result = static_cast< uint32_t >( ( m_bitBuffer >> ( 64 - m_bitsLeft ) & ( m_bitsLeft == 0 ? 0 : UINT64_C(0xFFFFFFFFFFFFFFFF) ) ) & mask );
-
-    if ( m_bitsLeft < bitCount )
-    {
-        m_bitBuffer = m_cursor[ 0 ];
-        m_bitBuffer |= static_cast< uint64_t >( m_cursor[ 1 ] ) << 8;
-        m_bitBuffer |= static_cast< uint64_t >( m_cursor[ 2 ] ) << 16;
-        m_bitBuffer |= static_cast< uint64_t >( m_cursor[ 3 ] ) << 24;
-        m_bitBuffer |= static_cast< uint64_t >( m_cursor[ 4 ] ) << 32;
-        m_bitBuffer |= static_cast< uint64_t >( m_cursor[ 5 ] ) << 40;
-        m_bitBuffer |= static_cast< uint64_t >( m_cursor[ 6 ] ) << 48;
-        m_bitBuffer |= static_cast< uint64_t >( m_cursor[ 7 ] ) << 56;
-
-        m_cursor += 8;
-
-        result     |= static_cast< uint32_t >( m_bitBuffer << m_bitsLeft ) & mask;
-        m_bitsLeft  = 64 - ( bitCount - m_bitsLeft );
-    }
-    else
-    {
-        m_bitsLeft -= bitCount;
-    }
-
-    return result;
-}
-
-RBS_INLINE uint32_t ReadBitstream::ReadVInt()
-{
-    uint32_t bitsToShift = 0;
-    uint32_t result      = 0;
-    uint32_t readByte;
-
-    do
-    {
-        readByte = Read( 8 );
-
-        result |= ( readByte & 0x7F ) << bitsToShift;
-        bitsToShift += 7;
-
-    } while ( readByte & 0x80 );
-
-    return result;
-}
-
-#endif // -- READ_BIT_STREAM_H__

3rdparty/ib-compress/writebitstream.h

@@ -1,178 +0,0 @@
-/*
-Copyright (c) 2014-2015, Conor Stokes
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
-
-1. Redistributions of source code must retain the above copyright notice, this
-list of conditions and the following disclaimer.
-2. Redistributions in binary form must reproduce the above copyright notice,
-this list of conditions and the following disclaimer in the documentation
-and/or other materials provided with the distribution.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
-ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#ifndef WRITE_BIT_STREAM_H__
-#define WRITE_BIT_STREAM_H__
-#pragma once
-
-#include <stdint.h>
-#include <stdlib.h>
-#include <memory.h>
-
-#ifdef _MSC_VER
-#define WBS_INLINE __forceinline
-#else
-#define WBS_INLINE inline
-#endif
-
-// Very simple bitstream for writing that will grow to accomodate written bits.
-class WriteBitstream
-{
-public:
-
-    // Construct the bit stream with an initial buffer capacity - should be a multiple of 8 and > 0
-    WriteBitstream( size_t initialBufferCapacity = 16 )
-    {
-        m_bufferCursor =
-        m_buffer       = new uint8_t[ initialBufferCapacity ];
-        m_bufferEnd    = m_buffer + initialBufferCapacity;
-        m_size         = 0;
-        m_bitsLeft     = 64;
-        m_bitBuffer    = 0;
-    }
-
-    ~WriteBitstream()
-    {
-        delete[] m_buffer;
-    }
-
-    // Size in bits.
-    size_t Size() const { return m_size; }
-
-    // Write a number of bits to the stream.
-    void Write( uint32_t value, uint32_t bitCount );
-
-    // Write a V int to the stream.
-    void WriteVInt( uint32_t value );
-
-    // Get the size in bytes
-    size_t ByteSize() const { return ( m_size + 7 ) >> 3; }
-
-    // Finish writing by flushing the buffer.
-    void Finish();
-
-    // Get the raw data for this buffer.
-    const uint8_t* RawData() const { return m_buffer; }
-
-private:
-
-    // If we need to grow the buffer.
-    void GrowBuffer();
-
-    // Not copyable
-    WriteBitstream( const WriteBitstream& );
-
-    // Not assignable
-    WriteBitstream& operator=( const WriteBitstream& );
-
-    uint64_t  m_bitBuffer;
-    size_t    m_size;
-    uint8_t*  m_buffer;
-    uint8_t*  m_bufferCursor;
-    uint8_t*  m_bufferEnd;
-    uint32_t  m_bitsLeft;
-};
-
-WBS_INLINE void WriteBitstream::Write( uint32_t value, uint32_t bitCount )
-{
-    m_bitBuffer |= ( static_cast<uint64_t>( value ) << ( 64 - m_bitsLeft ) ) & ( m_bitsLeft == 0 ? 0 : UINT64_C(0xFFFFFFFFFFFFFFFF) );
-
-    if ( bitCount > m_bitsLeft )
-    {
-        if ( m_bufferCursor > m_bufferEnd - 7 )
-        {
-            GrowBuffer();
-        }
-
-        m_bufferCursor[ 0 ] = m_bitBuffer & 0xFF;
-        m_bufferCursor[ 1 ] = ( m_bitBuffer >> 8 ) & 0xFF;
-        m_bufferCursor[ 2 ] = ( m_bitBuffer >> 16 ) & 0xFF;
-        m_bufferCursor[ 3 ] = ( m_bitBuffer >> 24 ) & 0xFF;
-        m_bufferCursor[ 4 ] = ( m_bitBuffer >> 32 ) & 0xFF;
-        m_bufferCursor[ 5 ] = ( m_bitBuffer >> 40 ) & 0xFF;
-        m_bufferCursor[ 6 ] = ( m_bitBuffer >> 48 ) & 0xFF;
-        m_bufferCursor[ 7 ] = ( m_bitBuffer >> 56 ) & 0xFF;
-
-        m_bufferCursor += 8;
-
-        m_bitBuffer = value >> ( m_bitsLeft );
-        m_bitsLeft  = 64 - ( bitCount - m_bitsLeft );
-    }
-    else
-    {
-        m_bitsLeft -= bitCount;
-    }
-
-    m_size += bitCount;
-}
-
-WBS_INLINE void WriteBitstream::WriteVInt( uint32_t value )
-{
-    do
-    {
-        uint32_t lower7 = value & 0x7F;
-
-        value >>= 7;
-
-        Write( lower7 | ( value > 0 ? 0x80 : 0 ), 8 );
-
-    } while ( value > 0 );
-}
-
-inline void WriteBitstream::Finish()
-{
-    if ( m_bufferCursor > m_bufferEnd - 8 )
-    {
-        GrowBuffer();
-    }
-
-    m_bufferCursor[ 0 ] = m_bitBuffer & 0xFF;
-    m_bufferCursor[ 1 ] = ( m_bitBuffer >> 8 ) & 0xFF;
-    m_bufferCursor[ 2 ] = ( m_bitBuffer >> 16 ) & 0xFF;
-    m_bufferCursor[ 3 ] = ( m_bitBuffer >> 24 ) & 0xFF;
-    m_bufferCursor[ 4 ] = ( m_bitBuffer >> 32 ) & 0xFF;
-    m_bufferCursor[ 5 ] = ( m_bitBuffer >> 40 ) & 0xFF;
-    m_bufferCursor[ 6 ] = ( m_bitBuffer >> 48 ) & 0xFF;
-    m_bufferCursor[ 7 ] = ( m_bitBuffer >> 56 ) & 0xFF;
-
-    m_bufferCursor += 8;
-}
-
-WBS_INLINE void WriteBitstream::GrowBuffer()
-{
-    size_t    bufferSize     = m_bufferEnd - m_buffer;
-    size_t    newBufferSize  = bufferSize * 2;
-    size_t    bufferPosition = m_bufferCursor - m_buffer;
-    uint8_t*  newBuffer      = new uint8_t[ newBufferSize ];
-
-    ::memcpy( reinterpret_cast<void*>( newBuffer ), reinterpret_cast<void*>( m_buffer ), bufferSize );
-
-    delete[] m_buffer;
-
-    m_buffer       = newBuffer;
-    m_bufferCursor = m_buffer + bufferPosition;
-    m_bufferEnd    = m_buffer + newBufferSize;
-}
-
-#endif // -- WRITE_BIT_STREAM_H__