--- title: Defold project settings brief: This manual describes how project specific settings work in Defold. --- # Project settings The file *game.project* contains all project wide settings. It must stay in the root folder of the project and must be named *game.project*. The first thing the engine does when starting up and launching your game is look for this file. Every setting in the file belongs to a category. When you open the file Defold presents all settings grouped by category. ![Project settings](images/project-settings/settings.jpg) Below are all the available settings, arranged by section. Some settings are not yet exposed in the settings editor (these are marked "hidden setting" below), but can be set manually by right clicking *game.project* and selecting Open With ▸ Text Editor. ## Sections and settings ### Project #### Title The title of the application. #### Version The version of the application. #### Write Log When checked, the engine will write a log file *log.txt* in the project root. When running on iOS, the log file can be accessed through iTunes and the *Apps* tab and the *File Sharing* section. On Android, the file is stored in the app's external storage. When running the *dmengine* development app, you can view the log with: ```bash $ adb shell cat /mnt/sdcard/Android/data/com.defold.dmengine/files/log.txt ``` #### Compress Archive Enables compression of archives when bundling. Note that this currently applies to all platforms except Android where the apk already contains all data compressed. #### Dependencies A list of URLs to the project *Library URL*s. Refer to the [Libraries manual](/manuals/libraries/) for more information. #### Custom Resources `custom_resources` :[Custom Resources](../shared/custom-resources.md) Loading custom resources is covered in more detail in the [File Access manual](/manuals/file-access/#how-to-access-files-bundled-with-the-application). #### Bundle Resources `bundle_resources` :[Bundle Resources](../shared/bundle-resources.md) Loading bundle resources is covered in more detail in the [File Access manual](/manuals/file-access/#how-to-access-files-bundled-with-the-application). #### Bundle Exclude Resources `bundle_exclude_resources` A comma separated list of resources that should not be included in the bundle. That is, they're removed from the result of the collection of the `bundle_resources` step. --- ### Bootstrap #### Main Collection File reference of the collection to use for starting the application, `/logic/main.collection` by default. #### Render Which render setup file to use, which defines the render pipeline, `/builtins/render/default.render` by default. --- ### Library #### Include Dirs A space separated list of directories that should be shared from your project via library sharing. Refer to the [Libraries manual](/manuals/libraries/) for more information. --- ### Script #### Shared State Check to share a single Lua state between all script types, unchecked by default. --- ### Engine #### Run While Iconified Allow the engine to continue running while the application window is iconified (desktop platforms only), `false` by default. #### Fixed Update Frequency The update frequency of the `fixed_update(self, dt)` lifecycle function. In Hertz. 60 by default. #### Max Time Step If the time step becomes too large during a single frame, it will be capped to this max value. Seconds. 0.5 by default. --- ### Display #### Width The width in pixels of the application window, `960` by default. #### Height The height in pixels of the application window, `640` by default. #### High Dpi Creates a high dpi back buffer on displays that support it. Typically the game will render in double the resolution than what is set in the *Width* and *Height* settings, which will still be the logical resolution used in scripts and properties. #### Samples How many samples to use for super sampling anti-aliasing. It sets the GLFW_FSAA_SAMPLES window hint. It is `0` by default, which means that anti-aliasing is turned off. #### Fullscreen Check if the application should start full screen. If unchecked, the application runs windowed. #### Update Frequency The desired frame rate in Hertz. Set to 0 for variable frame rate. A value larger than 0 will result in a fixed frame rate capped at runtime towards the actual frame rate (which means that you cannot update the game loop twice in an engine frame). Use [`sys.set_update_frequency(hz)`](https://defold.com/ref/stable/sys/?q=set_update_frequency#sys.set_update_frequency:frequency) to change this value at runtime. This setting also works in headless builds. #### Swap interval This integer value controls how the application deals with vsync. 0 disables vsync, and the default value is 1. When using an OpenGL adapter, this value sets the number of frames the window should [update between buffer swaps](https://www.khronos.org/opengl/wiki/Swap_Interval). For Vulkan, there is no built-in concept of swap interval, the value instead controls if vsync should be enabled or not. #### Display Profiles Specifies which display profiles file to use, `/builtins/render/default.display_profilesc` by default. Learn more in the [GUI Layouts manual](/manuals/gui-layouts/#creating-display-profiles). #### Dynamic Orientation Check if the app should dynamically switch between portrait and landscape on device rotation. Note that the development app does not currently respect this setting. --- ### Render #### Clear Color Red Clear color red channel, used by the render script and when the window is created. #### Clear Color Green Clear color green channel, used by the render script and when the window is created. #### Clear Color Blue Clear color blue channel, used by the render script and when the window is created. #### Clear Color Alpha Clear color alpha channel, used by the render script and when the window is created. --- ### Physics #### Type Which type of physics to use, `2D` (default) or `3D`. #### Gravity Y World gravity along y-axis, `-10` by default (natural gravity) #### Debug Check if physics should be visualized for debugging. #### Debug Alpha Alpha component value for visualized physics, `0`--`1`. The value is `0.9` by default. #### World Count Max number of concurrent physics worlds, `4` by default. If you load more than 4 worlds simultaneously through collection proxies you need to increase this value. Be aware that each physics world allocates a fair amount of memory. #### Gravity X World gravity along x-axis, `0` by default. #### Gravity Z World gravity along z-axis, `0` by default. #### Scale Tells the physics engine how to scale the physics worlds in relation to the game world for numerical precision, `0.01`--`1.0`. If the value is set to `0.02`, it means that the physics engine will view 50 units as 1 meter ($1 / 0.02$). The default value is `1.0`. #### Allow Dynamic Transforms Check if the physics engine should apply the transform of a game object to any attached collision object components. This can be used to move, scale and rotate collision shapes, even those that are dynamic. `true` by default. #### Use Fixed Timestep Check if the physics engine should use fixed and framerate independent updates. Use this setting in combination with the `fixed_update(self, dt)` lifecycle function and the `engine.fixed_update_frequency` project setting to interact with the physics engine at regular intervals. For new projects the recommended setting is `true`. `false` by default #### Debug Scale How big to draw unit objects in physics, like triads and normals, `30` by default. #### Max Collisions How many collisions that will be reported back to the scripts, `64` by default. #### Max Contacts How many contact points that will be reported back to the scripts, `128` by default. #### Contact Impulse Limit Ignore contact impulses with values less than this setting, `0.0` by default. #### Ray Cast Limit 2d The max number of 2d ray cast requests per frame. `64` by default. #### Ray Cast Limit 3d The max number of 3d ray cast requests per frame. `128` by default. #### Trigger Overlap Capacity The maximum number of overlapping physics triggers. `16` by default. --- ### Graphics #### Default Texture Min Filter Specifies which filtering to use for minification filtering, `linear` by default. #### Default Texture Mag Filter Specifies which filtering to use for magnification filtering, `linear` by default. #### Max Draw Calls The max number of render calls, `1024` by default. #### Max Characters: The number of characters pre-allocated in the text rendering buffer, i.e. the number of characters that can be displayed each frame, `8192` by default. #### Max Debug Vertices The maximum number of debug vertices. Used for physics shape rendering among other things, `10000` by default. #### Texture Profiles The texture profiles file to use for this project, `/builtins/graphics/default.texture_profiles` by default. #### Verify Graphics Calls Verify the return value after each graphics call and report any errors in the log. --- ### Shader #### Output SPIR-V Compile and output SPIR-V shaders for use with Metal or Vulkan. --- ### Input #### Repeat Delay Seconds to wait before a held down input should start repeating itself, `0.5` by default. #### Repeat Interval Seconds to wait between each repetition of a held down input, `0.2` by default. #### Gamepads File reference of the gamepads config file, which maps gamepad signals to OS, `/builtins/input/default.gamepads` by default. #### Game Binding File reference of the input config file, which maps hardware inputs to actions, `/input/game.input_binding` by default. #### Use Accelerometer Check to make the engine receive accelerator input events each frame. Disabling accelerometer input may give some performance benefit, checked by default. --- ### Resource #### Http Cache If checked, a HTTP cache is enabled for faster loading of resources over the network to the running engine on device, unset by default. #### Uri Where to find the project build data, in URI format. #### Max Resources The max number of resources that can be loaded at the same time, `1024` by default. --- ### Network #### Http Timeout The HTTP timeout in seconds. Set to `0` to disable timeout, which is the default. #### Http Thread Count The number of worker threads for the HTTP service. #### Http Cache Enabled Check to enable the HTTP cache for network requests (using `http.request()`. The HTTP cache will store the response associated with a request and reuse the stored response for subsequent requests. The HTTP cache supports the `ETag` and `Cache-Control: max-age` HTTP response headers. #### SSL Certificates File containing SSL root certificates to use when verifying the certificate chain during SSL handshakes. --- ### Collection #### Max Instances Max number of game object instances in a collection, `1024` by default. #### Max Input Stack Entries Max number of game objects in the input stack, `16` by default. --- ### Sound #### Gain Global gain (volume), `0`--`1`, The value is `1` by default. #### Max Sound Data Max number of sound resources, i.e the number of unique sound files at runtime, `128` by default. #### Max Sound Buffers (Currently not used) Max number of concurrent sound buffers, `32` by default. #### Max Sound Sources (Currently not used) Max number of concurrently playing sounds, `16` by default. #### Max Sound Instances Max number of concurrent sound instances, i.e. actual sounds played at the same time. `256` by default. #### Use Thread If checked, the sound system will use threads for sound playback to reduce risk of stutter when the main thread is under heavy load. Checked by default. --- ### Sprite #### Max Count Max number of sprites per collection, `128` by default. [(See information about component max count optimizations)](#component-max-count-optimizations). #### Subpixels Check to allow sprites to appear unaligned with respect to pixels, checked by default. --- ### Tilemap #### Max Count Max number of tile maps per collection, `16` by default. [(See information about component max count optimizations)](#component-max-count-optimizations). #### Max Tile Count Max number of concurrent visible tiles per collection, `2048` by default. --- ### Spine #### Max Count Max number of spine model components, `128` by default. [(See information about component max count optimizations)](#component-max-count-optimizations). --- ### Mesh #### Max Count Max number of mesh components per collection, `128` by default. [(See information about component max count optimizations)](#component-max-count-optimizations). --- ### Model #### Max Count Max number of model components per collection, `128` by default. [(See information about component max count optimizations)](#component-max-count-optimizations). --- ### GUI #### Max Count Max number of GUI components, `64` by default. [(See information about component max count optimizations)](#component-max-count-optimizations). #### Max Particlefx Count The max number of concurrent emitters, `64` by default. #### Max Particle Count The max number of concurrent particles, `1024` by default. #### Max Animation Count The max number of active animations in gui, `1024` by default. --- ### Label #### Max Count Max number of labels, `64` by default. [(See information about component max count optimizations)](#component-max-count-optimizations). #### Subpixels Check to allow labels to appear unaligned with respect to pixels, checked by default. --- ### Particle FX #### Max Count The max number of concurrent emitters, `64` by default. [(See information about component max count optimizations)](#component-max-count-optimizations). #### Max Particle Count The max number of concurrent particles, `1024` by default. --- ### Collection proxy #### Max Count Max number of collection proxies, `8` by default. [(See information about component max count optimizations)](#component-max-count-optimizations). --- ### Collection factory #### Max Count Max number of collection factories, `128` by default. [(See information about component max count optimizations)](#component-max-count-optimizations). --- ### Factory #### Max Count Max number of game object factories, `128` by default. [(See information about component max count optimizations)](#component-max-count-optimizations). --- ### iOS #### App Icon 57x57--180x180 Image file (.png) to use as application icon at given width and height dimensions `W` × `H`. #### Launch Screen Storyboard file (.storyboard). Learn more about how to create one in the [iOS manual](/manuals/ios/#creating-a-storyboard). #### Pre Rendered Icons (iOS 6 and earlier) Check if your icons are pre-rendered. If this is unchecked the icons will get a glossy highlight added automatically. #### Bundle Identifier The bundle identifier lets iOS recognize any updates to your app. Your bundle ID must be registered with Apple and be unique to your app. You cannot use the same identifier for both iOS and macOS apps. Must consist of two or more segments separated by a dot. Each segment must start with a letter. Each segment must only consist of alphanumeric letters, the underscore or hypen (-) character (see [`CFBundleIdentifier`](https://developer.apple.com/library/archive/documentation/General/Reference/InfoPlistKeyReference/Articles/CoreFoundationKeys.html#//apple_ref/doc/uid/20001431-130430)) #### Bundle Name The bundle short name (15 characters) (see [`CFBundleName`](https://developer.apple.com/library/archive/documentation/General/Reference/InfoPlistKeyReference/Articles/CoreFoundationKeys.html#//apple_ref/doc/uid/20001431-130430)). #### Bundle Version The bundle version, either a number or x.y.z. (see [`CFBundleVersion`](https://developer.apple.com/library/archive/documentation/General/Reference/InfoPlistKeyReference/Articles/CoreFoundationKeys.html#//apple_ref/doc/uid/20001431-130430)) #### Info.plist If specified, use this info.plist file when bundling your app. #### Privacy Manifest The Apple Privacy Manifest for the application. The field will default to `/builtins/manifests/ios/PrivacyInfo.xcprivacy`. #### Custom Entitlements If specified, the entitlements in the supplied provisioning profile (.entitlements, .xcent, .plist) will be merged with the entitlements from the provisioning profile supplied when bundling the application. #### Override Entitlements If checked the Custom Entitlements will replace the ones in the provisioning profile when bundling. Must be used in combination with the Custom Entitlements setting above. #### Default Language The language used if the application doesn't have user's preferred language in `Localizations` list (see [`CFBundleDevelopmentRegion`](https://developer.apple.com/library/archive/documentation/General/Reference/InfoPlistKeyReference/Articles/CoreFoundationKeys.html#//apple_ref/doc/uid/20001431-130430)). Use the two-letter ISO 639-1 standard if preferred language is available there or the three-letter ISO 639-2. #### Localizations This field contains comma-separated strings identifying the language name or ISO language designator of the supported localizations (see [`CFBundleLocalizations`](https://developer.apple.com/library/archive/documentation/General/Reference/InfoPlistKeyReference/Articles/CoreFoundationKeys.html#//apple_ref/doc/uid/20001431-109552)). --- ### Android #### App Icon 36x36--192x192 Image file (.png) to use as application icon at given width and height dimensions `W` × `H`. #### Push Icon Small--LargeXxxhdpi Image files (.png) to be used as custom push notification icon on Android. The icons will automatically be used for both local or remote push notifications. If not set the application icon will be used by default. #### Push Field Title Specifies which payload JSON field should be used as notification title. Leaving this setting empty makes the pushes default to the application name as title. #### Push Field Text Specifies which payload JSON field should be used as notification text. If left empty, the text in the field `alert` is used, just as on iOS. #### Version Code An integer value indicating the version of the app. Increase the value for each subsequent update. #### Package Package identifier. Must consist of two or more segments separated by a dot. Each segment must start with a letter. Each segment must only consist of alphanumeric letters or the underscore character. #### Gcm Sender Id Google Cloud Messaging Sender Id. Set this to the string assigned by Google to enable push notifications. #### Manifest If set, use the specified Android manifest XML file when bundling. #### Iap Provider Specifies which store to use. Valid options are `Amazon` and `GooglePlay`, `GooglePlay` by default. #### Input Method Specifies which method to use to get keyboard input on Android devices. Valid options are `KeyEvent` (old method) and `HiddenInputField` (new). `KeyEvent` by default. #### Immersive Mode If set, hides the navigation and status bars and lets your app capture all touch events on the screen. #### Debuggable Whether or not the application can be debugged using tools such as [GAPID](https://github.com/google/gapid) or [Android Studio](https://developer.android.com/studio/profile/android-profiler). This will set the `android:debuggable` flag in the Android manifest ([official documentation](https://developer.android.com/guide/topics/manifest/application-element#debug)). #### Extract Native Libs Specifies whether the package installer extracts native libraries from the APK to the file system. If set to `false`, your native libraries are stored uncompressed in the APK. Although your APK might be larger, your application loads faster because the libraries load directly from the APK at runtime. This will set the `android:extractNativeLibs` flag in the Android Manifest ([official documentation](https://developer.android.com/guide/topics/manifest/application-element#extractNativeLibs)). `true` by default. --- ### macOS #### App Icon Image file (.png) to use as application icon on macOS. #### Info.plist If set, use the specified info.plist file when bundling. #### Privacy Manifest The Apple Privacy Manifest for the application. The field will default to `/builtins/manifests/osx/PrivacyInfo.xcprivacy`. #### Bundle Identifier The bundle identifier lets macOS recognize updates to your app. Your bundle ID must be registered with Apple and be unique to your app. You cannot use the same identifier for both iOS and macOS apps. Must consist of two or more segments separated by a dot. Each segment must start with a letter. Each segment must only consist of alphanumeric letters, the underscore or hypen (-) character. #### Default Language The language used if the application doesn't have user's preferred language in `Localizations` list (see [CFBundleDevelopmentRegion](https://developer.apple.com/library/archive/documentation/General/Reference/InfoPlistKeyReference/Articles/CoreFoundationKeys.html#//apple_ref/doc/uid/20001431-130430)). Use the two-letter ISO 639-1 standard if preferred language is available there or the three-letter ISO 639-2. #### Localizations This field contains comma-separated strings identifying the language name or ISO language designator of the supported localizations (see [CFBundleLocalizations](https://developer.apple.com/library/archive/documentation/General/Reference/InfoPlistKeyReference/Articles/CoreFoundationKeys.html#//apple_ref/doc/uid/20001431-109552)). --- ### Windows #### App Icon Image file (.ico) to use as application icon on Windows. Read more about how to create a .ico file in the [Windows manual](/manuals/windows). #### Iap Provider Specifies which store to use. Valid options are `None` and `Gameroom`, `None` by default. --- ### HTML5 #### Heap Size Heap size (number of megabytes) for Emscripten to use. By default this value is 256MB. #### .html Shell Use the specified template HTML file when bundling. By default `/builtins/manifests/web/engine_template.html`. #### Custom .css Use the specified theme CSS file when bundling. By default `/builtins/manifests/web/light_theme.css`. #### Splash Image If set, use the specified splash image on startup when bundling instead of Defold logo. #### Archive Location Prefix When bundling for HTML5 game data is split up into one or more archive data files. When the engine starts the game, these archive files are read into memory. Use this setting to specify the location of the data, `archive` by default. #### Archive Location Suffix Suffix to be appended to the archive files. Useful to, for instance, force non-cached content from a CDN (`?version2` for example). #### Engine Arguments List of arguments that will be passed to the engine. #### Show Fullscreen Button Enables Fullscreen Button in `index.html` file. By default `true`. #### Show Made With Defold Enables Made With Defold link in `index.html` file. By default `true`. #### Scale Mode Specifies which method to use to scale the game canvas. By default `Downscale Fit`. --- ### IAP #### Auto Finish Transactions Check to automatically finish IAP transactions. If unchecked, you need to explicitly call `iap.finish()` after a successful transaction, checked by default. --- ### Live update #### Private Key If set, use the specified private key file when bundling live update content. If no key file is set, a key is generated. #### Public Key If set, use the specified public key file when bundling live update content. If no key file is set, a key is generated. --- ### Native extension #### _App Manifest_ If set, use the app manifest to customize the engine build. This allows you to remove unused parts from the engine to decrease the final binary size. Learn how to exclude unused feature [in the application manifest manual](/manuals/app-manifest). --- ### Profiler #### Track Cpu If checked, enable CPU profiling in release versions of the builds. Normally, you can only access profiling information in debug builds. --- ## File format The format of the settings file is simple text (INI format) and can be edited by any standard text editor. The format looks like this: ```ini [category1] setting1 = value setting2 = value [category2] ... ``` A real example is: ```ini [bootstrap] main_collection = /main/main.collectionc ``` which means that the setting *main_collection* belongs to the *bootstrap* category. Whenever a file reference is used, like the example above, the path needs to be appended with a 'c' character, which means you're referencing the compiled version of the file. Also note that the folder containing *game.project* will be the project root, which is why there is an initial '/' in the setting path. ## Setting config values on engine startup When the engine starts, it is possible to provide config values from the command line that override the *game.project* settings: ```bash # Specify a bootstrap collection $ dmengine --config=bootstrap.main_collection=/my.collectionc # Set two custom config values $ dmengine --config=test.my_value=4711 --config=test2.my_value2=1234 ``` Custom values can---just like any other config value---be read with [`sys.get_config()`](/ref/sys/#sys.get_config): ```lua local my_value = tonumber(sys.get_config("test.my_value")) ``` :[Component max count optimizations](../shared/component-max-count-optimizations.md) ## Custom project settings It is possible to define custom settings for the main project or for a [native extension](/manuals/extensions/). Custom settings for the main project must be defined in a `game.properties` file in the root of the project. For a native extension they should be defined in an `ext.properties` file next to the `ext.manifest` file. The settings file uses the same INI format as *game.project* and property attributes are defined using a dot notation with a suffix: ``` [my_category] my_property.private = 1 ... ``` The default meta file that is always applied is available [here](https://github.com/defold/defold/blob/dev/com.dynamo.cr/com.dynamo.cr.bob/src/com/dynamo/bob/meta.properties) The following attributes are currently available: ``` // `type` - used for the value string parsing (only in bob.jar for now) my_property.type = string // one of the following values: bool, string, number, integer, string_array, resource // `help` - used as help tip in the editor (not used for now) my_property.help = string // `default` - value used as default if user didn't set value manually (only in bob.jar for now) my_property.default = string // `private` - private value used during the bundle process but will be removed from the bundle itself my_property.private = 1 // boolean value 1 or 0 ``` At the moment meta properties are used only in `bob.jar` when bundling application, but later will be parsed by the editor and represented in the *game.project* viewer.