Add smarty template engine.

resources/templates/engine/smarty/README

@@ -0,0 +1,574 @@
+Smarty 3.1.15
+
+Author: Monte Ohrt <monte at ohrt dot com >
+Author: Uwe Tews
+
+AN INTRODUCTION TO SMARTY 3
+
+NOTICE FOR 3.1 release:
+
+Please see the SMARTY_3.1_NOTES.txt file that comes with the distribution.
+
+NOTICE for 3.0.5 release:
+
+Smarty now follows the PHP error_reporting level by default. If PHP does not mask E_NOTICE and you try to access an unset template variable, you will now get an E_NOTICE warning. To revert to the old behavior:
+
+$smarty->error_reporting = E_ALL & ~E_NOTICE;
+
+NOTICE for 3.0 release:
+
+IMPORTANT: Some API adjustments have been made between the RC4 and 3.0 release.
+We felt it is better to make these now instead of after a 3.0 release, then have to
+immediately deprecate APIs in 3.1. Online documentation has been updated
+to reflect these changes. Specifically:
+
+---- API CHANGES RC4 -> 3.0 ----
+
+$smarty->register->*
+$smarty->unregister->*
+$smarty->utility->*
+$samrty->cache->*
+
+Have all been changed to local method calls such as:
+
+$smarty->clearAllCache()
+$smarty->registerFoo()
+$smarty->unregisterFoo()
+$smarty->testInstall()
+etc.
+
+Registration of function, block, compiler, and modifier plugins have been
+consolidated under two API calls:
+
+$smarty->registerPlugin(...)
+$smarty->unregisterPlugin(...)
+
+Registration of pre, post, output and variable filters have been
+consolidated under two API calls:
+
+$smarty->registerFilter(...)
+$smarty->unregisterFilter(...)
+
+Please refer to the online documentation for all specific changes:
+
+http://www.smarty.net/documentation
+
+----
+
+The Smarty 3 API has been refactored to a syntax geared
+for consistency and modularity. The Smarty 2 API syntax is still supported, but
+will throw a deprecation notice. You can disable the notices, but it is highly
+recommended to adjust your syntax to Smarty 3, as the Smarty 2 syntax must run
+through an extra rerouting wrapper.
+
+Basically, all Smarty methods now follow the "fooBarBaz" camel case syntax. Also,
+all Smarty properties now have getters and setters. So for example, the property
+$smarty->cache_dir can be set with $smarty->setCacheDir('foo/') and can be
+retrieved with $smarty->getCacheDir().
+
+Some of the Smarty 3 APIs have been revoked such as the "is*" methods that were
+just duplicate functions of the now available "get*" methods.
+
+Here is a rundown of the Smarty 3 API:
+
+$smarty->fetch($template, $cache_id = null, $compile_id = null, $parent = null)
+$smarty->display($template, $cache_id = null, $compile_id = null, $parent = null)
+$smarty->isCached($template, $cache_id = null, $compile_id = null)
+$smarty->createData($parent = null)
+$smarty->createTemplate($template, $cache_id = null, $compile_id = null, $parent = null)
+$smarty->enableSecurity()
+$smarty->disableSecurity()
+$smarty->setTemplateDir($template_dir)
+$smarty->addTemplateDir($template_dir)
+$smarty->templateExists($resource_name)
+$smarty->loadPlugin($plugin_name, $check = true)
+$smarty->loadFilter($type, $name)
+$smarty->setExceptionHandler($handler)
+$smarty->addPluginsDir($plugins_dir)
+$smarty->getGlobal($varname = null)
+$smarty->getRegisteredObject($name)
+$smarty->getDebugTemplate()
+$smarty->setDebugTemplate($tpl_name)
+$smarty->assign($tpl_var, $value = null, $nocache = false)
+$smarty->assignGlobal($varname, $value = null, $nocache = false)
+$smarty->assignByRef($tpl_var, &$value, $nocache = false)
+$smarty->append($tpl_var, $value = null, $merge = false, $nocache = false)
+$smarty->appendByRef($tpl_var, &$value, $merge = false)
+$smarty->clearAssign($tpl_var)
+$smarty->clearAllAssign()
+$smarty->configLoad($config_file, $sections = null)
+$smarty->getVariable($variable, $_ptr = null, $search_parents = true, $error_enable = true)
+$smarty->getConfigVariable($variable)
+$smarty->getStreamVariable($variable)
+$smarty->getConfigVars($varname = null)
+$smarty->clearConfig($varname = null)
+$smarty->getTemplateVars($varname = null, $_ptr = null, $search_parents = true)
+$smarty->clearAllCache($exp_time = null, $type = null)
+$smarty->clearCache($template_name, $cache_id = null, $compile_id = null, $exp_time = null, $type = null)
+
+$smarty->registerPlugin($type, $tag, $callback, $cacheable = true, $cache_attr = array())
+
+$smarty->registerObject($object_name, $object_impl, $allowed = array(), $smarty_args = true, $block_methods = array())
+
+$smarty->registerFilter($type, $function_name)
+$smarty->registerResource($resource_type, $function_names)
+$smarty->registerDefaultPluginHandler($function_name)
+$smarty->registerDefaultTemplateHandler($function_name)
+
+$smarty->unregisterPlugin($type, $tag)
+$smarty->unregisterObject($object_name)
+$smarty->unregisterFilter($type, $function_name)
+$smarty->unregisterResource($resource_type)
+
+$smarty->compileAllTemplates($extension = '.tpl', $force_compile = false, $time_limit = 0, $max_errors = null)
+$smarty->clearCompiledTemplate($resource_name = null, $compile_id = null, $exp_time = null)
+$smarty->testInstall()
+
+// then all the getters/setters, available for all properties. Here are a few:
+
+$caching = $smarty->getCaching();      // get $smarty->caching
+$smarty->setCaching(true);             // set $smarty->caching
+$smarty->setDeprecationNotices(false); // set $smarty->deprecation_notices
+$smarty->setCacheId($id);              // set $smarty->cache_id
+$debugging = $smarty->getDebugging();  // get $smarty->debugging
+
+
+FILE STRUCTURE
+
+The Smarty 3 file structure is similar to Smarty 2:
+
+/libs/
+  Smarty.class.php
+/libs/sysplugins/
+  internal.*
+/libs/plugins/
+  function.mailto.php
+  modifier.escape.php
+  ...
+
+A lot of Smarty 3 core functionality lies in the sysplugins directory; you do
+not need to change any files here. The /libs/plugins/ folder is where Smarty
+plugins are located. You can add your own here, or create a separate plugin
+directory, just the same as Smarty 2. You will still need to create your own
+/cache/, /templates/, /templates_c/, /configs/ folders. Be sure /cache/ and
+/templates_c/ are writable.
+
+The typical way to use Smarty 3 should also look familiar:
+
+require('Smarty.class.php');
+$smarty = new Smarty;
+$smarty->assign('foo','bar');
+$smarty->display('index.tpl');
+
+
+However, Smarty 3 works completely different on the inside. Smarty 3 is mostly
+backward compatible with Smarty 2, except for the following items:
+
+*) Smarty 3 is PHP 5 only. It will not work with PHP 4.
+*) The {php} tag is disabled by default. Enable with $smarty->allow_php_tag=true.
+*) Delimiters surrounded by whitespace are no longer treated as Smarty tags.
+   Therefore, { foo } will not compile as a tag, you must use {foo}. This change
+   Makes Javascript/CSS easier to work with, eliminating the need for {literal}.
+   This can be disabled by setting $smarty->auto_literal = false;
+*) The Smarty 3 API is a bit different. Many Smarty 2 API calls are deprecated
+   but still work. You will want to update your calls to Smarty 3 for maximum
+   efficiency.
+
+
+There are many things that are new to Smarty 3. Here are the notable items:
+   
+LEXER/PARSER
+============
+
+Smarty 3 now uses a lexing tokenizer for its parser/compiler. Basically, this
+means Smarty has some syntax additions that make life easier such as in-template
+math, shorter/intuitive function parameter options, infinite function recursion,
+more accurate error handling, etc.
+
+
+WHAT IS NEW IN SMARTY TEMPLATE SYNTAX
+=====================================
+
+Smarty 3 allows expressions almost anywhere. Expressions can include PHP
+functions as long as they are not disabled by the security policy, object
+methods and properties, etc. The {math} plugin is no longer necessary but
+is still supported for BC.
+
+Examples:
+{$x+$y}                           will output the sum of x and y.
+{$foo = strlen($bar)}             function in assignment
+{assign var=foo value= $x+$y}     in attributes 
+{$foo = myfunct( ($x+$y)*3 )}     as function parameter 
+{$foo[$x+3]}                      as array index
+
+Smarty tags can be used as values within other tags.
+Example:  {$foo={counter}+3}
+
+Smarty tags can also be used inside double quoted strings.
+Example:  {$foo="this is message {counter}"}
+
+You can define arrays within templates.
+Examples:
+{assign var=foo value=[1,2,3]}
+{assign var=foo value=['y'=>'yellow','b'=>'blue']}
+Arrays can be nested.
+{assign var=foo value=[1,[9,8],3]}
+
+There is a new short syntax supported for assigning variables.
+Example: {$foo=$bar+2}
+
+You can assign a value to a specific array element. If the variable exists but
+is not an array, it is converted to an array before the new values are assigned.
+Examples:
+{$foo['bar']=1}
+{$foo['bar']['blar']=1}
+
+You can append values to an array. If the variable exists but is not an array,
+it is converted to an array before the new values are assigned.
+Example: {$foo[]=1}
+
+You can use a PHP-like syntax for accessing array elements, as well as the
+original "dot" notation.
+Examples:
+{$foo[1]}             normal access
+{$foo['bar']}
+{$foo['bar'][1]}
+{$foo[$x+$x]}         index may contain any expression
+{$foo[$bar[1]]}       nested index
+{$foo[section_name]}  smarty section access, not array access!
+
+The original "dot" notation stays, and with improvements.
+Examples:
+{$foo.a.b.c}        =>  $foo['a']['b']['c'] 
+{$foo.a.$b.c}       =>  $foo['a'][$b]['c']        with variable index
+{$foo.a.{$b+4}.c}   =>  $foo['a'][$b+4]['c']       with expression as index
+{$foo.a.{$b.c}}     =>  $foo['a'][$b['c']]         with nested index
+
+note that { and } are used to address ambiguties when nesting the dot syntax. 
+
+Variable names themselves can be variable and contain expressions.
+Examples:
+$foo         normal variable
+$foo_{$bar}  variable name containing other variable 
+$foo_{$x+$y} variable name containing expressions 
+$foo_{$bar}_buh_{$blar}  variable name with multiple segments
+{$foo_{$x}}  will output the variable $foo_1 if $x has a value of 1.
+
+Object method chaining is implemented.
+Example: {$object->method1($x)->method2($y)}
+
+{for} tag added for looping (replacement for {section} tag):
+{for $x=0, $y=count($foo); $x<$y; $x++}  ....  {/for}
+Any number of statements can be used separated by comma as the first
+inital expression at {for}.
+
+{for $x = $start to $end step $step} ... {/for}is in the SVN now .
+You can use also
+{for $x = $start to $end} ... {/for}
+In this case the step value will be automaticall 1 or -1 depending on the start and end values.
+Instead of $start and $end you can use any valid expression.
+Inside the loop the following special vars can be accessed:
+$x@iteration = number of iteration
+$x@total = total number of iterations
+$x@first = true on first iteration
+$x@last = true on last iteration
+
+
+The Smarty 2 {section} syntax is still supported.
+
+New shorter {foreach} syntax to loop over an array.
+Example: {foreach $myarray as $var}...{/foreach}
+
+Within the foreach loop, properties are access via:
+
+$var@key            foreach $var array key
+$var@iteration      foreach current iteration count (1,2,3...)
+$var@index          foreach current index count (0,1,2...)
+$var@total          foreach $var array total
+$var@first          true on first iteration
+$var@last           true on last iteration
+
+The Smarty 2 {foreach} tag syntax is still supported.
+
+NOTE: {$bar[foo]} still indicates a variable inside of a {section} named foo. 
+If you want to access an array element with index foo, you must use quotes
+such as {$bar['foo']}, or use the dot syntax {$bar.foo}.
+
+while block tag is now implemented:
+{while $foo}...{/while}
+{while $x lt 10}...{/while}
+
+Direct access to PHP functions:
+Just as you can use PHP functions as modifiers directly, you can now access
+PHP functions directly, provided they are permitted by security settings:
+{time()}
+
+There is a new {function}...{/function} block tag to implement a template function.
+This enables reuse of code sequences like a plugin function. It can call itself recursively.
+Template function must be called with the new {call name=foo...} tag.
+
+Example:
+
+Template file:
+{function name=menu level=0}
+  <ul class="level{$level}">
+  {foreach $data as $entry}
+    {if is_array($entry)}
+      <li>{$entry@key}</li>
+       {call name=menu data=$entry level=$level+1}
+    {else}
+      <li>{$entry}</li>
+    {/if}
+  {/foreach}
+  </ul>
+{/function}
+
+{$menu = ['item1','item2','item3' => ['item3-1','item3-2','item3-3' =>
+  ['item3-3-1','item3-3-2']],'item4']}
+
+{call name=menu data=$menu}
+
+
+Generated output:
+    * item1
+    * item2
+    * item3
+          o item3-1
+          o item3-2
+          o item3-3
+                + item3-3-1
+                + item3-3-2
+    * item4
+
+The function tag itself must have the "name" attribute. This name is the tag
+name when calling the function. The function tag may have any number of
+additional attributes. These will be default settings for local variables.
+
+New {nocache} block function:
+{nocache}...{/nocache} will declare a section of the template to be non-cached
+when template caching is enabled.
+
+New nocache attribute:
+You can declare variable/function output as non-cached with the nocache attribute.
+Examples:
+
+{$foo nocache=true}
+{$foo nocache} /* same */
+
+{foo bar="baz" nocache=true}
+{foo bar="baz" nocache} /* same */
+
+{time() nocache=true}
+{time() nocache} /* same */
+
+Or you can also assign the variable in your script as nocache:
+$smarty->assign('foo',$something,true); // third param is nocache setting
+{$foo} /* non-cached */
+
+$smarty.current_dir returns the directory name of the current template.
+
+You can use strings directly as templates with the "string" resource type.
+Examples:
+$smarty->display('string:This is my template, {$foo}!'); // php
+{include file="string:This is my template, {$foo}!"} // template
+
+
+
+VARIABLE SCOPE / VARIABLE STORAGE
+=================================
+
+In Smarty 2, all assigned variables were stored within the Smarty object. 
+Therefore, all variables assigned in PHP were accessible by all subsequent 
+fetch and display template calls.
+
+In Smarty 3, we have the choice to assign variables to the main Smarty object, 
+to user-created data objects, and to user-created template objects. 
+These objects can be chained. The object at the end of a chain can access all
+variables belonging to that template and all variables within the parent objects.
+The Smarty object can only be the root of a chain, but a chain can be isolated
+from the Smarty object.
+
+All known Smarty assignment interfaces will work on the data and template objects.
+
+Besides the above mentioned objects, there is also a special storage area for
+global variables.
+
+A Smarty data object can be created as follows:
+$data = $smarty->createData();    // create root data object
+$data->assign('foo','bar');       // assign variables as usual
+$data->config_load('my.conf');									 // load config file    
+
+$data= $smarty->createData($smarty);  // create data object having a parent link to
+the Smarty object
+
+$data2= $smarty->createData($data);   // create data object having a parent link to
+the $data data object
+
+A template object can be created by using the createTemplate method. It has the
+same parameter assignments as the fetch() or display() method.
+Function definition:
+function createTemplate($template, $cache_id = null, $compile_id = null, $parent = null)
+
+The first parameter can be a template name, a smarty object or a data object.
+
+Examples:
+$tpl = $smarty->createTemplate('mytpl.tpl'); // create template object not linked to any parent
+$tpl->assign('foo','bar');                   // directly assign variables
+$tpl->config_load('my.conf');									 // load config file    
+
+$tpl = $smarty->createTemplate('mytpl.tpl',$smarty);  // create template having a parent link to the Smarty object
+$tpl = $smarty->createTemplate('mytpl.tpl',$data);    // create template having a parent link to the $data object
+
+The standard fetch() and display() methods will implicitly create a template object.
+If the $parent parameter is not specified in these method calls, the template object
+is will link back to the Smarty object as it's parent.
+
+If a template is called by an {include...} tag from another template, the
+subtemplate links back to the calling template as it's parent. 
+
+All variables assigned locally or from a parent template are accessible. If the
+template creates or modifies a variable by using the {assign var=foo...} or
+{$foo=...} tags, these new values are only known locally (local scope). When the
+template exits, none of the new variables or modifications can be seen in the
+parent template(s). This is same behavior as in Smarty 2. 
+
+With Smarty 3, we can assign variables with a scope attribute which allows the
+availablility of these new variables or modifications globally (ie in the parent
+templates.)
+
+Possible scopes are local, parent, root and global. 
+Examples:
+{assign var=foo value='bar'}       // no scope is specified, the default 'local'
+{$foo='bar'}                       // same, local scope
+{assign var=foo value='bar' scope='local'} // same, local scope
+
+{assign var=foo value='bar' scope='parent'} // Values will be available to the parent object 
+{$foo='bar' scope='parent'}                 // (normally the calling template)
+
+{assign var=foo value='bar' scope='root'}   // Values will be exported up to the root object, so they can 
+{$foo='bar' scope='root'}                   // be seen from all templates using the same root.
+
+{assign var=foo value='bar' scope='global'} // Values will be exported to global variable storage, 
+{$foo='bar' scope='global'}                 // they are available to any and all templates.
+
+
+The scope attribute can also be attached to the {include...} tag. In this case,
+the specified scope will be the default scope for all assignments within the
+included template.
+
+
+PLUGINS
+=======
+
+Smarty3 are following the same coding rules as in Smarty2. 
+The only difference is that the template object is passed as additional third parameter.
+
+smarty_plugintype_name (array $params, object $smarty, object $template)
+
+The Smarty 2 plugins are still compatible as long as they do not make use of specific Smarty2 internals.
+
+
+TEMPLATE INHERITANCE:
+=====================
+
+With template inheritance you can define blocks, which are areas that can be
+overriden by child templates, so your templates could look like this: 
+
+parent.tpl:
+<html>
+  <head>
+    <title>{block name='title'}My site name{/block}</title>
+  </head>
+  <body>
+    <h1>{block name='page-title'}Default page title{/block}</h1>
+    <div id="content">
+      {block name='content'}
+        Default content
+      {/block}
+    </div>
+  </body>
+</html>
+
+child.tpl:
+{extends file='parent.tpl'} 
+{block name='title'}
+Child title
+{/block}
+
+grandchild.tpl:
+{extends file='child.tpl'} 
+{block name='title'}Home - {$smarty.block.parent}{/block} 
+{block name='page-title'}My home{/block}
+{block name='content'}
+  {foreach $images as $img}
+    <img src="{$img.url}" alt="{$img.description}" />
+  {/foreach}
+{/block}
+
+We redefined all the blocks here, however in the title block we used {$smarty.block.parent},
+which tells Smarty to insert the default content from the parent template in its place.
+The content block was overriden to display the image files, and page-title has also be 
+overriden to display a completely different title. 
+
+If we render grandchild.tpl we will get this: 
+<html>
+  <head>
+    <title>Home - Child title</title>
+  </head>
+  <body>
+    <h1>My home</h1>
+    <div id="content">
+      <img src="/example.jpg" alt="image" />
+      <img src="/example2.jpg" alt="image" />
+      <img src="/example3.jpg" alt="image" />
+    </div>
+  </body>
+</html>
+
+NOTE: In the child templates everything outside the {extends} or {block} tag sections
+is ignored.
+
+The inheritance tree can be as big as you want (meaning you can extend a file that 
+extends another one that extends another one and so on..), but be aware that all files 
+have to be checked for modifications at runtime so the more inheritance the more overhead you add.
+
+Instead of defining the parent/child relationships with the {extends} tag in the child template you
+can use the resource as follow:
+
+$smarty->display('extends:parent.tpl|child.tpl|grandchild.tpl');
+
+Child {block} tags may optionally have a append or prepend attribute. In this case the parent block content 
+is appended or prepended to the child block content.
+
+{block name='title' append} My title {/block}
+
+
+PHP STREAMS:
+============
+
+(see online documentation)
+
+VARIBLE FILTERS:
+================
+
+(see online documentation)
+
+
+STATIC CLASS ACCESS AND NAMESPACE SUPPORT
+=========================================
+
+You can register a class with optional namespace for the use in the template like:
+
+$smarty->register->templateClass('foo','name\name2\myclass');
+
+In the template you can use it like this:
+{foo::method()}  etc.
+
+
+=======================
+
+Please look through it and send any questions/suggestions/etc to the forums.
+
+http://www.phpinsider.com/smarty-forum/viewtopic.php?t=14168
+
+Monte and Uwe

resources/templates/engine/smarty/Smarty.class.php

@@ -0,0 +1,1575 @@
+<?php
+/**
+ * Project:     Smarty: the PHP compiling template engine
+ * File:        Smarty.class.php
+ * SVN:         $Id: Smarty.class.php 4778 2013-09-17 20:44:41Z [email protected] $
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * For questions, help, comments, discussion, etc., please join the
+ * Smarty mailing list. Send a blank e-mail to
+ * [email protected]
+ *
+ * @link http://www.smarty.net/
+ * @copyright 2008 New Digital Group, Inc.
+ * @author Monte Ohrt <monte at ohrt dot com>
+ * @author Uwe Tews
+ * @author Rodney Rehm
+ * @package Smarty
+ * @version 3.1.15
+ */
+
+/**
+ * define shorthand directory separator constant
+ */
+if (!defined('DS')) {
+    define('DS', DIRECTORY_SEPARATOR);
+}
+
+/**
+ * set SMARTY_DIR to absolute path to Smarty library files.
+ * Sets SMARTY_DIR only if user application has not already defined it.
+ */
+if (!defined('SMARTY_DIR')) {
+    define('SMARTY_DIR', dirname(__FILE__) . DS);
+}
+
+/**
+ * set SMARTY_SYSPLUGINS_DIR to absolute path to Smarty internal plugins.
+ * Sets SMARTY_SYSPLUGINS_DIR only if user application has not already defined it.
+ */
+if (!defined('SMARTY_SYSPLUGINS_DIR')) {
+    define('SMARTY_SYSPLUGINS_DIR', SMARTY_DIR . 'sysplugins' . DS);
+}
+if (!defined('SMARTY_PLUGINS_DIR')) {
+    define('SMARTY_PLUGINS_DIR', SMARTY_DIR . 'plugins' . DS);
+}
+if (!defined('SMARTY_MBSTRING')) {
+    define('SMARTY_MBSTRING', function_exists('mb_split'));
+}
+if (!defined('SMARTY_RESOURCE_CHAR_SET')) {
+    // UTF-8 can only be done properly when mbstring is available!
+    /**
+     * @deprecated in favor of Smarty::$_CHARSET
+     */
+    define('SMARTY_RESOURCE_CHAR_SET', SMARTY_MBSTRING ? 'UTF-8' : 'ISO-8859-1');
+}
+if (!defined('SMARTY_RESOURCE_DATE_FORMAT')) {
+    /**
+     * @deprecated in favor of Smarty::$_DATE_FORMAT
+     */
+    define('SMARTY_RESOURCE_DATE_FORMAT', '%b %e, %Y');
+}
+
+/**
+ * register the class autoloader
+ */
+if (!defined('SMARTY_SPL_AUTOLOAD')) {
+    define('SMARTY_SPL_AUTOLOAD', 0);
+}
+
+if (SMARTY_SPL_AUTOLOAD && set_include_path(get_include_path() . PATH_SEPARATOR . SMARTY_SYSPLUGINS_DIR) !== false) {
+    $registeredAutoLoadFunctions = spl_autoload_functions();
+    if (!isset($registeredAutoLoadFunctions['spl_autoload'])) {
+        spl_autoload_register();
+    }
+} else {
+    spl_autoload_register('smartyAutoload');
+}
+
+/**
+ * Load always needed external class files
+ */
+include_once SMARTY_SYSPLUGINS_DIR.'smarty_internal_data.php';
+include_once SMARTY_SYSPLUGINS_DIR.'smarty_internal_templatebase.php';
+include_once SMARTY_SYSPLUGINS_DIR.'smarty_internal_template.php';
+include_once SMARTY_SYSPLUGINS_DIR.'smarty_resource.php';
+include_once SMARTY_SYSPLUGINS_DIR.'smarty_internal_resource_file.php';
+include_once SMARTY_SYSPLUGINS_DIR.'smarty_cacheresource.php';
+include_once SMARTY_SYSPLUGINS_DIR.'smarty_internal_cacheresource_file.php';
+
+/**
+ * This is the main Smarty class
+ * @package Smarty
+ */
+class Smarty extends Smarty_Internal_TemplateBase
+{
+    /**#@+
+     * constant definitions
+     */
+
+    /**
+     * smarty version
+     */
+    const SMARTY_VERSION = 'Smarty-3.1.15';
+
+    /**
+     * define variable scopes
+     */
+    const SCOPE_LOCAL = 0;
+    const SCOPE_PARENT = 1;
+    const SCOPE_ROOT = 2;
+    const SCOPE_GLOBAL = 3;
+    /**
+     * define caching modes
+     */
+    const CACHING_OFF = 0;
+    const CACHING_LIFETIME_CURRENT = 1;
+    const CACHING_LIFETIME_SAVED = 2;
+    /**
+     * define constant for clearing cache files be saved expiration datees
+     */
+    const CLEAR_EXPIRED = -1;
+
+    /**
+     * define compile check modes
+     */
+    const COMPILECHECK_OFF = 0;
+    const COMPILECHECK_ON = 1;
+    const COMPILECHECK_CACHEMISS = 2;
+    /**
+     * modes for handling of "<?php ... ?>" tags in templates.
+     */
+    const PHP_PASSTHRU = 0; //-> print tags as plain text
+    const PHP_QUOTE = 1; //-> escape tags as entities
+    const PHP_REMOVE = 2; //-> escape tags as entities
+    const PHP_ALLOW = 3; //-> escape tags as entities
+    /**
+     * filter types
+     */
+    const FILTER_POST = 'post';
+    const FILTER_PRE = 'pre';
+    const FILTER_OUTPUT = 'output';
+    const FILTER_VARIABLE = 'variable';
+    /**
+     * plugin types
+     */
+    const PLUGIN_FUNCTION = 'function';
+    const PLUGIN_BLOCK = 'block';
+    const PLUGIN_COMPILER = 'compiler';
+    const PLUGIN_MODIFIER = 'modifier';
+    const PLUGIN_MODIFIERCOMPILER = 'modifiercompiler';
+
+    /**#@-*/
+
+    /**
+     * assigned global tpl vars
+     */
+    public static $global_tpl_vars = array();
+
+    /**
+     * error handler returned by set_error_hanlder() in Smarty::muteExpectedErrors()
+     */
+    public static $_previous_error_handler = null;
+    /**
+     * contains directories outside of SMARTY_DIR that are to be muted by muteExpectedErrors()
+     */
+    public static $_muted_directories = array();
+    /**
+     * Flag denoting if Multibyte String functions are available
+     */
+    public static $_MBSTRING = SMARTY_MBSTRING;
+    /**
+     * The character set to adhere to (e.g. "UTF-8")
+     */
+    public static $_CHARSET = SMARTY_RESOURCE_CHAR_SET;
+    /**
+     * The date format to be used internally
+     * (accepts date() and strftime())
+     */
+    public static $_DATE_FORMAT = SMARTY_RESOURCE_DATE_FORMAT;
+    /**
+     * Flag denoting if PCRE should run in UTF-8 mode
+     */
+    public static $_UTF8_MODIFIER = 'u';
+
+    /**
+     * Flag denoting if operating system is windows
+     */
+    public static $_IS_WINDOWS = false;
+
+    /**#@+
+     * variables
+     */
+
+    /**
+     * auto literal on delimiters with whitspace
+     * @var boolean
+     */
+    public $auto_literal = true;
+    /**
+     * display error on not assigned variables
+     * @var boolean
+     */
+    public $error_unassigned = false;
+    /**
+     * look up relative filepaths in include_path
+     * @var boolean
+     */
+    public $use_include_path = false;
+    /**
+     * template directory
+     * @var array
+     */
+    private $template_dir = array();
+    /**
+     * joined template directory string used in cache keys
+     * @var string
+     */
+    public $joined_template_dir = null;
+    /**
+     * joined config directory string used in cache keys
+     * @var string
+     */
+    public $joined_config_dir = null;
+    /**
+     * default template handler
+     * @var callable
+     */
+    public $default_template_handler_func = null;
+    /**
+     * default config handler
+     * @var callable
+     */
+    public $default_config_handler_func = null;
+    /**
+     * default plugin handler
+     * @var callable
+     */
+    public $default_plugin_handler_func = null;
+    /**
+     * compile directory
+     * @var string
+     */
+    private $compile_dir = null;
+    /**
+     * plugins directory
+     * @var array
+     */
+    private $plugins_dir = array();
+    /**
+     * cache directory
+     * @var string
+     */
+    private $cache_dir = null;
+    /**
+     * config directory
+     * @var array
+     */
+    private $config_dir = array();
+    /**
+     * force template compiling?
+     * @var boolean
+     */
+    public $force_compile = false;
+    /**
+     * check template for modifications?
+     * @var boolean
+     */
+    public $compile_check = true;
+    /**
+     * use sub dirs for compiled/cached files?
+     * @var boolean
+     */
+    public $use_sub_dirs = false;
+    /**
+     * allow ambiguous resources (that are made unique by the resource handler)
+     * @var boolean
+     */
+    public $allow_ambiguous_resources = false;
+    /**
+     * caching enabled
+     * @var boolean
+     */
+    public $caching = false;
+    /**
+     * merge compiled includes
+     * @var boolean
+     */
+    public $merge_compiled_includes = false;
+    /**
+     * cache lifetime in seconds
+     * @var integer
+     */
+    public $cache_lifetime = 3600;
+    /**
+     * force cache file creation
+     * @var boolean
+     */
+    public $force_cache = false;
+    /**
+     * Set this if you want different sets of cache files for the same
+     * templates.
+     *
+     * @var string
+     */
+    public $cache_id = null;
+    /**
+     * Set this if you want different sets of compiled files for the same
+     * templates.
+     *
+     * @var string
+     */
+    public $compile_id = null;
+    /**
+     * template left-delimiter
+     * @var string
+     */
+    public $left_delimiter = "{";
+    /**
+     * template right-delimiter
+     * @var string
+     */
+    public $right_delimiter = "}";
+    /**#@+
+     * security
+     */
+    /**
+     * class name
+     *
+     * This should be instance of Smarty_Security.
+     *
+     * @var string
+     * @see Smarty_Security
+     */
+    public $security_class = 'Smarty_Security';
+    /**
+     * implementation of security class
+     *
+     * @var Smarty_Security
+     */
+    public $security_policy = null;
+    /**
+     * controls handling of PHP-blocks
+     *
+     * @var integer
+     */
+    public $php_handling = self::PHP_PASSTHRU;
+    /**
+     * controls if the php template file resource is allowed
+     *
+     * @var bool
+     */
+    public $allow_php_templates = false;
+    /**
+     * Should compiled-templates be prevented from being called directly?
+     *
+     * {@internal
+     * Currently used by Smarty_Internal_Template only.
+     * }}
+     *
+     * @var boolean
+     */
+    public $direct_access_security = true;
+    /**#@-*/
+    /**
+     * debug mode
+     *
+     * Setting this to true enables the debug-console.
+     *
+     * @var boolean
+     */
+    public $debugging = false;
+    /**
+     * This determines if debugging is enable-able from the browser.
+     * <ul>
+     *  <li>NONE => no debugging control allowed</li>
+     *  <li>URL => enable debugging when SMARTY_DEBUG is found in the URL.</li>
+     * </ul>
+     * @var string
+     */
+    public $debugging_ctrl = 'NONE';
+    /**
+     * Name of debugging URL-param.
+     *
+     * Only used when $debugging_ctrl is set to 'URL'.
+     * The name of the URL-parameter that activates debugging.
+     *
+     * @var type
+     */
+    public $smarty_debug_id = 'SMARTY_DEBUG';
+    /**
+     * Path of debug template.
+     * @var string
+     */
+    public $debug_tpl = null;
+    /**
+     * When set, smarty uses this value as error_reporting-level.
+     * @var int
+     */
+    public $error_reporting = null;
+    /**
+     * Internal flag for getTags()
+     * @var boolean
+     */
+    public $get_used_tags = false;
+
+    /**#@+
+     * config var settings
+     */
+
+    /**
+     * Controls whether variables with the same name overwrite each other.
+     * @var boolean
+     */
+    public $config_overwrite = true;
+    /**
+     * Controls whether config values of on/true/yes and off/false/no get converted to boolean.
+     * @var boolean
+     */
+    public $config_booleanize = true;
+    /**
+     * Controls whether hidden config sections/vars are read from the file.
+     * @var boolean
+     */
+    public $config_read_hidden = false;
+
+    /**#@-*/
+
+    /**#@+
+     * resource locking
+     */
+
+    /**
+     * locking concurrent compiles
+     * @var boolean
+     */
+    public $compile_locking = true;
+    /**
+     * Controls whether cache resources should emply locking mechanism
+     * @var boolean
+     */
+    public $cache_locking = false;
+    /**
+     * seconds to wait for acquiring a lock before ignoring the write lock
+     * @var float
+     */
+    public $locking_timeout = 10;
+
+    /**#@-*/
+
+    /**
+     * global template functions
+     * @var array
+     */
+    public $template_functions = array();
+    /**
+     * resource type used if none given
+     *
+     * Must be an valid key of $registered_resources.
+     * @var string
+     */
+    public $default_resource_type = 'file';
+    /**
+     * caching type
+     *
+     * Must be an element of $cache_resource_types.
+     *
+     * @var string
+     */
+    public $caching_type = 'file';
+    /**
+     * internal config properties
+     * @var array
+     */
+    public $properties = array();
+    /**
+     * config type
+     * @var string
+     */
+    public $default_config_type = 'file';
+    /**
+     * cached template objects
+     * @var array
+     */
+    public $template_objects = array();
+    /**
+     * check If-Modified-Since headers
+     * @var boolean
+     */
+    public $cache_modified_check = false;
+    /**
+     * registered plugins
+     * @var array
+     */
+    public $registered_plugins = array();
+    /**
+     * plugin search order
+     * @var array
+     */
+    public $plugin_search_order = array('function', 'block', 'compiler', 'class');
+    /**
+     * registered objects
+     * @var array
+     */
+    public $registered_objects = array();
+    /**
+     * registered classes
+     * @var array
+     */
+    public $registered_classes = array();
+    /**
+     * registered filters
+     * @var array
+     */
+    public $registered_filters = array();
+    /**
+     * registered resources
+     * @var array
+     */
+    public $registered_resources = array();
+    /**
+     * resource handler cache
+     * @var array
+     */
+    public $_resource_handlers = array();
+    /**
+     * registered cache resources
+     * @var array
+     */
+    public $registered_cache_resources = array();
+    /**
+     * cache resource handler cache
+     * @var array
+     */
+    public $_cacheresource_handlers = array();
+    /**
+     * autoload filter
+     * @var array
+     */
+    public $autoload_filters = array();
+    /**
+     * default modifier
+     * @var array
+     */
+    public $default_modifiers = array();
+    /**
+     * autoescape variable output
+     * @var boolean
+     */
+    public $escape_html = false;
+    /**
+     * global internal smarty vars
+     * @var array
+     */
+    public static $_smarty_vars = array();
+    /**
+     * start time for execution time calculation
+     * @var int
+     */
+    public $start_time = 0;
+    /**
+     * default file permissions
+     * @var int
+     */
+    public $_file_perms = 0644;
+    /**
+     * default dir permissions
+     * @var int
+     */
+    public $_dir_perms = 0771;
+    /**
+     * block tag hierarchy
+     * @var array
+     */
+    public $_tag_stack = array();
+    /**
+     * self pointer to Smarty object
+     * @var Smarty
+     */
+    public $smarty;
+    /**
+     * required by the compiler for BC
+     * @var string
+     */
+    public $_current_file = null;
+    /**
+     * internal flag to enable parser debugging
+     * @var bool
+     */
+    public $_parserdebug = false;
+    /**
+     * Saved parameter of merged templates during compilation
+     *
+     * @var array
+     */
+    public $merged_templates_func = array();
+    /**#@-*/
+
+    /**
+     * Initialize new Smarty object
+     *
+     */
+    public function __construct()
+    {
+        // selfpointer needed by some other class methods
+        $this->smarty = $this;
+        if (is_callable('mb_internal_encoding')) {
+            mb_internal_encoding(Smarty::$_CHARSET);
+        }
+        $this->start_time = microtime(true);
+        // set default dirs
+        $this->setTemplateDir('.' . DS . 'templates' . DS)
+            ->setCompileDir('.' . DS . 'templates_c' . DS)
+            ->setPluginsDir(SMARTY_PLUGINS_DIR)
+            ->setCacheDir('.' . DS . 'cache' . DS)
+            ->setConfigDir('.' . DS . 'configs' . DS);
+
+        $this->debug_tpl = 'file:' . dirname(__FILE__) . '/debug.tpl';
+        if (isset($_SERVER['SCRIPT_NAME'])) {
+            $this->assignGlobal('SCRIPT_NAME', $_SERVER['SCRIPT_NAME']);
+        }
+    }
+
+    /**
+     * Class destructor
+     */
+    public function __destruct()
+    {
+        // intentionally left blank
+    }
+
+    /**
+     * <<magic>> set selfpointer on cloned object
+     */
+    public function __clone()
+    {
+        $this->smarty = $this;
+    }
+
+    /**
+     * <<magic>> Generic getter.
+     *
+     * Calls the appropriate getter function.
+     * Issues an E_USER_NOTICE if no valid getter is found.
+     *
+     * @param  string $name property name
+     * @return mixed
+     */
+    public function __get($name)
+    {
+        $allowed = array(
+        'template_dir' => 'getTemplateDir',
+        'config_dir' => 'getConfigDir',
+        'plugins_dir' => 'getPluginsDir',
+        'compile_dir' => 'getCompileDir',
+        'cache_dir' => 'getCacheDir',
+        );
+
+        if (isset($allowed[$name])) {
+            return $this->{$allowed[$name]}();
+        } else {
+            trigger_error('Undefined property: '. get_class($this) .'::$'. $name, E_USER_NOTICE);
+        }
+    }
+
+    /**
+     * <<magic>> Generic setter.
+     *
+     * Calls the appropriate setter function.
+     * Issues an E_USER_NOTICE if no valid setter is found.
+     *
+     * @param string $name  property name
+     * @param mixed  $value parameter passed to setter
+     */
+    public function __set($name, $value)
+    {
+        $allowed = array(
+        'template_dir' => 'setTemplateDir',
+        'config_dir' => 'setConfigDir',
+        'plugins_dir' => 'setPluginsDir',
+        'compile_dir' => 'setCompileDir',
+        'cache_dir' => 'setCacheDir',
+        );
+
+        if (isset($allowed[$name])) {
+            $this->{$allowed[$name]}($value);
+        } else {
+            trigger_error('Undefined property: ' . get_class($this) . '::$' . $name, E_USER_NOTICE);
+        }
+    }
+
+    /**
+     * Check if a template resource exists
+     *
+     * @param  string  $resource_name template name
+     * @return boolean status
+     */
+    public function templateExists($resource_name)
+    {
+        // create template object
+        $save = $this->template_objects;
+        $tpl = new $this->template_class($resource_name, $this);
+        // check if it does exists
+        $result = $tpl->source->exists;
+        $this->template_objects = $save;
+
+        return $result;
+    }
+
+    /**
+     * Returns a single or all global  variables
+     *
+     * @param  object $smarty
+     * @param  string $varname variable name or null
+     * @return string variable value or or array of variables
+     */
+    public function getGlobal($varname = null)
+    {
+        if (isset($varname)) {
+            if (isset(self::$global_tpl_vars[$varname])) {
+                return self::$global_tpl_vars[$varname]->value;
+            } else {
+                return '';
+            }
+        } else {
+            $_result = array();
+            foreach (self::$global_tpl_vars AS $key => $var) {
+                $_result[$key] = $var->value;
+            }
+
+            return $_result;
+        }
+    }
+
+    /**
+     * Empty cache folder
+     *
+     * @param  integer $exp_time expiration time
+     * @param  string  $type     resource type
+     * @return integer number of cache files deleted
+     */
+    public function clearAllCache($exp_time = null, $type = null)
+    {
+        // load cache resource and call clearAll
+        $_cache_resource = Smarty_CacheResource::load($this, $type);
+        Smarty_CacheResource::invalidLoadedCache($this);
+
+        return $_cache_resource->clearAll($this, $exp_time);
+    }
+
+    /**
+     * Empty cache for a specific template
+     *
+     * @param  string  $template_name template name
+     * @param  string  $cache_id      cache id
+     * @param  string  $compile_id    compile id
+     * @param  integer $exp_time      expiration time
+     * @param  string  $type          resource type
+     * @return integer number of cache files deleted
+     */
+    public function clearCache($template_name, $cache_id = null, $compile_id = null, $exp_time = null, $type = null)
+    {
+        // load cache resource and call clear
+        $_cache_resource = Smarty_CacheResource::load($this, $type);
+        Smarty_CacheResource::invalidLoadedCache($this);
+
+        return $_cache_resource->clear($this, $template_name, $cache_id, $compile_id, $exp_time);
+    }
+
+    /**
+     * Loads security class and enables security
+     *
+     * @param  string|Smarty_Security $security_class if a string is used, it must be class-name
+     * @return Smarty                 current Smarty instance for chaining
+     * @throws SmartyException        when an invalid class name is provided
+     */
+    public function enableSecurity($security_class = null)
+    {
+        if ($security_class instanceof Smarty_Security) {
+            $this->security_policy = $security_class;
+
+            return $this;
+        } elseif (is_object($security_class)) {
+            throw new SmartyException("Class '" . get_class($security_class) . "' must extend Smarty_Security.");
+        }
+        if ($security_class == null) {
+            $security_class = $this->security_class;
+        }
+        if (!class_exists($security_class)) {
+            throw new SmartyException("Security class '$security_class' is not defined");
+        } elseif ($security_class !== 'Smarty_Security' && !is_subclass_of($security_class, 'Smarty_Security')) {
+            throw new SmartyException("Class '$security_class' must extend Smarty_Security.");
+        } else {
+            $this->security_policy = new $security_class($this);
+        }
+
+        return $this;
+    }
+
+    /**
+     * Disable security
+     * @return Smarty current Smarty instance for chaining
+     */
+    public function disableSecurity()
+    {
+        $this->security_policy = null;
+
+        return $this;
+    }
+
+    /**
+     * Set template directory
+     *
+     * @param  string|array $template_dir directory(s) of template sources
+     * @return Smarty       current Smarty instance for chaining
+     */
+    public function setTemplateDir($template_dir)
+    {
+        $this->template_dir = array();
+        foreach ((array) $template_dir as $k => $v) {
+            $this->template_dir[$k] = rtrim($v, '/\\') . DS;
+        }
+
+        $this->joined_template_dir = join(DIRECTORY_SEPARATOR, $this->template_dir);
+
+        return $this;
+    }
+
+    /**
+     * Add template directory(s)
+     *
+     * @param  string|array    $template_dir directory(s) of template sources
+     * @param  string          $key          of the array element to assign the template dir to
+     * @return Smarty          current Smarty instance for chaining
+     * @throws SmartyException when the given template directory is not valid
+     */
+    public function addTemplateDir($template_dir, $key=null)
+    {
+        // make sure we're dealing with an array
+        $this->template_dir = (array) $this->template_dir;
+
+        if (is_array($template_dir)) {
+            foreach ($template_dir as $k => $v) {
+                if (is_int($k)) {
+                    // indexes are not merged but appended
+                    $this->template_dir[] = rtrim($v, '/\\') . DS;
+                } else {
+                    // string indexes are overridden
+                    $this->template_dir[$k] = rtrim($v, '/\\') . DS;
+                }
+            }
+        } elseif ($key !== null) {
+            // override directory at specified index
+            $this->template_dir[$key] = rtrim($template_dir, '/\\') . DS;
+        } else {
+            // append new directory
+            $this->template_dir[] = rtrim($template_dir, '/\\') . DS;
+        }
+        $this->joined_template_dir = join(DIRECTORY_SEPARATOR, $this->template_dir);
+
+        return $this;
+    }
+
+    /**
+     * Get template directories
+     *
+     * @param mixed index of directory to get, null to get all
+     * @return array|string list of template directories, or directory of $index
+     */
+    public function getTemplateDir($index=null)
+    {
+        if ($index !== null) {
+            return isset($this->template_dir[$index]) ? $this->template_dir[$index] : null;
+        }
+
+        return (array) $this->template_dir;
+    }
+
+    /**
+     * Set config directory
+     *
+     * @param  string|array $template_dir directory(s) of configuration sources
+     * @return Smarty       current Smarty instance for chaining
+     */
+    public function setConfigDir($config_dir)
+    {
+        $this->config_dir = array();
+        foreach ((array) $config_dir as $k => $v) {
+            $this->config_dir[$k] = rtrim($v, '/\\') . DS;
+        }
+
+        $this->joined_config_dir = join(DIRECTORY_SEPARATOR, $this->config_dir);
+
+        return $this;
+    }
+
+    /**
+     * Add config directory(s)
+     *
+     * @param string|array $config_dir directory(s) of config sources
+     * @param string key of the array element to assign the config dir to
+     * @return Smarty current Smarty instance for chaining
+     */
+    public function addConfigDir($config_dir, $key=null)
+    {
+        // make sure we're dealing with an array
+        $this->config_dir = (array) $this->config_dir;
+
+        if (is_array($config_dir)) {
+            foreach ($config_dir as $k => $v) {
+                if (is_int($k)) {
+                    // indexes are not merged but appended
+                    $this->config_dir[] = rtrim($v, '/\\') . DS;
+                } else {
+                    // string indexes are overridden
+                    $this->config_dir[$k] = rtrim($v, '/\\') . DS;
+                }
+            }
+        } elseif ($key !== null) {
+            // override directory at specified index
+            $this->config_dir[$key] = rtrim($config_dir, '/\\') . DS;
+        } else {
+            // append new directory
+            $this->config_dir[] = rtrim($config_dir, '/\\') . DS;
+        }
+
+        $this->joined_config_dir = join(DIRECTORY_SEPARATOR, $this->config_dir);
+
+        return $this;
+    }
+
+    /**
+     * Get config directory
+     *
+     * @param mixed index of directory to get, null to get all
+     * @return array|string configuration directory
+     */
+    public function getConfigDir($index=null)
+    {
+        if ($index !== null) {
+            return isset($this->config_dir[$index]) ? $this->config_dir[$index] : null;
+        }
+
+        return (array) $this->config_dir;
+    }
+
+    /**
+     * Set plugins directory
+     *
+     * @param  string|array $plugins_dir directory(s) of plugins
+     * @return Smarty       current Smarty instance for chaining
+     */
+    public function setPluginsDir($plugins_dir)
+    {
+        $this->plugins_dir = array();
+        foreach ((array) $plugins_dir as $k => $v) {
+            $this->plugins_dir[$k] = rtrim($v, '/\\') . DS;
+        }
+
+        return $this;
+    }
+
+    /**
+     * Adds directory of plugin files
+     *
+     * @param object $smarty
+     * @param string $ |array $ plugins folder
+     * @return Smarty current Smarty instance for chaining
+     */
+    public function addPluginsDir($plugins_dir)
+    {
+        // make sure we're dealing with an array
+        $this->plugins_dir = (array) $this->plugins_dir;
+
+        if (is_array($plugins_dir)) {
+            foreach ($plugins_dir as $k => $v) {
+                if (is_int($k)) {
+                    // indexes are not merged but appended
+                    $this->plugins_dir[] = rtrim($v, '/\\') . DS;
+                } else {
+                    // string indexes are overridden
+                    $this->plugins_dir[$k] = rtrim($v, '/\\') . DS;
+                }
+            }
+        } else {
+            // append new directory
+            $this->plugins_dir[] = rtrim($plugins_dir, '/\\') . DS;
+        }
+
+        $this->plugins_dir = array_unique($this->plugins_dir);
+
+        return $this;
+    }
+
+    /**
+     * Get plugin directories
+     *
+     * @return array list of plugin directories
+     */
+    public function getPluginsDir()
+    {
+        return (array) $this->plugins_dir;
+    }
+
+    /**
+     * Set compile directory
+     *
+     * @param  string $compile_dir directory to store compiled templates in
+     * @return Smarty current Smarty instance for chaining
+     */
+    public function setCompileDir($compile_dir)
+    {
+        $this->compile_dir = rtrim($compile_dir, '/\\') . DS;
+        if (!isset(Smarty::$_muted_directories[$this->compile_dir])) {
+            Smarty::$_muted_directories[$this->compile_dir] = null;
+        }
+
+        return $this;
+    }
+
+    /**
+     * Get compiled directory
+     *
+     * @return string path to compiled templates
+     */
+    public function getCompileDir()
+    {
+        return $this->compile_dir;
+    }
+
+    /**
+     * Set cache directory
+     *
+     * @param  string $cache_dir directory to store cached templates in
+     * @return Smarty current Smarty instance for chaining
+     */
+    public function setCacheDir($cache_dir)
+    {
+        $this->cache_dir = rtrim($cache_dir, '/\\') . DS;
+        if (!isset(Smarty::$_muted_directories[$this->cache_dir])) {
+            Smarty::$_muted_directories[$this->cache_dir] = null;
+        }
+
+        return $this;
+    }
+
+    /**
+     * Get cache directory
+     *
+     * @return string path of cache directory
+     */
+    public function getCacheDir()
+    {
+        return $this->cache_dir;
+    }
+
+    /**
+     * Set default modifiers
+     *
+     * @param  array|string $modifiers modifier or list of modifiers to set
+     * @return Smarty       current Smarty instance for chaining
+     */
+    public function setDefaultModifiers($modifiers)
+    {
+        $this->default_modifiers = (array) $modifiers;
+
+        return $this;
+    }
+
+    /**
+     * Add default modifiers
+     *
+     * @param  array|string $modifiers modifier or list of modifiers to add
+     * @return Smarty       current Smarty instance for chaining
+     */
+    public function addDefaultModifiers($modifiers)
+    {
+        if (is_array($modifiers)) {
+            $this->default_modifiers = array_merge($this->default_modifiers, $modifiers);
+        } else {
+            $this->default_modifiers[] = $modifiers;
+        }
+
+        return $this;
+    }
+
+    /**
+     * Get default modifiers
+     *
+     * @return array list of default modifiers
+     */
+    public function getDefaultModifiers()
+    {
+        return $this->default_modifiers;
+    }
+
+
+    /**
+     * Set autoload filters
+     *
+     * @param  array  $filters filters to load automatically
+     * @param  string $type    "pre", "output", … specify the filter type to set. Defaults to none treating $filters' keys as the appropriate types
+     * @return Smarty current Smarty instance for chaining
+     */
+    public function setAutoloadFilters($filters, $type=null)
+    {
+        if ($type !== null) {
+            $this->autoload_filters[$type] = (array) $filters;
+        } else {
+            $this->autoload_filters = (array) $filters;
+        }
+
+        return $this;
+    }
+
+    /**
+     * Add autoload filters
+     *
+     * @param  array  $filters filters to load automatically
+     * @param  string $type    "pre", "output", … specify the filter type to set. Defaults to none treating $filters' keys as the appropriate types
+     * @return Smarty current Smarty instance for chaining
+     */
+    public function addAutoloadFilters($filters, $type=null)
+    {
+        if ($type !== null) {
+            if (!empty($this->autoload_filters[$type])) {
+                $this->autoload_filters[$type] = array_merge($this->autoload_filters[$type], (array) $filters);
+            } else {
+                $this->autoload_filters[$type] = (array) $filters;
+            }
+        } else {
+            foreach ((array) $filters as $key => $value) {
+                if (!empty($this->autoload_filters[$key])) {
+                    $this->autoload_filters[$key] = array_merge($this->autoload_filters[$key], (array) $value);
+                } else {
+                    $this->autoload_filters[$key] = (array) $value;
+                }
+            }
+        }
+
+        return $this;
+    }
+
+    /**
+     * Get autoload filters
+     *
+     * @param  string $type type of filter to get autoloads for. Defaults to all autoload filters
+     * @return array  array( 'type1' => array( 'filter1', 'filter2', … ) ) or array( 'filter1', 'filter2', …) if $type was specified
+     */
+    public function getAutoloadFilters($type=null)
+    {
+        if ($type !== null) {
+            return isset($this->autoload_filters[$type]) ? $this->autoload_filters[$type] : array();
+        }
+
+        return $this->autoload_filters;
+    }
+
+    /**
+     * return name of debugging template
+     *
+     * @return string
+     */
+    public function getDebugTemplate()
+    {
+        return $this->debug_tpl;
+    }
+
+    /**
+     * set the debug template
+     *
+     * @param  string          $tpl_name
+     * @return Smarty          current Smarty instance for chaining
+     * @throws SmartyException if file is not readable
+     */
+    public function setDebugTemplate($tpl_name)
+    {
+        if (!is_readable($tpl_name)) {
+            throw new SmartyException("Unknown file '{$tpl_name}'");
+        }
+        $this->debug_tpl = $tpl_name;
+
+        return $this;
+    }
+
+    /**
+     * creates a template object
+     *
+     * @param  string  $template   the resource handle of the template file
+     * @param  mixed   $cache_id   cache id to be used with this template
+     * @param  mixed   $compile_id compile id to be used with this template
+     * @param  object  $parent     next higher level of Smarty variables
+     * @param  boolean $do_clone   flag is Smarty object shall be cloned
+     * @return object  template object
+     */
+    public function createTemplate($template, $cache_id = null, $compile_id = null, $parent = null, $do_clone = true)
+    {
+        if (!empty($cache_id) && (is_object($cache_id) || is_array($cache_id))) {
+            $parent = $cache_id;
+            $cache_id = null;
+        }
+        if (!empty($parent) && is_array($parent)) {
+            $data = $parent;
+            $parent = null;
+        } else {
+            $data = null;
+        }
+        // default to cache_id and compile_id of Smarty object
+        $cache_id = $cache_id === null ? $this->cache_id : $cache_id;
+        $compile_id = $compile_id === null ? $this->compile_id : $compile_id;
+        // already in template cache?
+        if ($this->allow_ambiguous_resources) {
+            $_templateId = Smarty_Resource::getUniqueTemplateName($this, $template) . $cache_id . $compile_id;
+        } else {
+            $_templateId = $this->joined_template_dir . '#' . $template . $cache_id . $compile_id;
+        }
+        if (isset($_templateId[150])) {
+            $_templateId = sha1($_templateId);
+        }
+        if ($do_clone) {
+            if (isset($this->template_objects[$_templateId])) {
+                // return cached template object
+                $tpl = clone $this->template_objects[$_templateId];
+                $tpl->smarty = clone $tpl->smarty;
+                $tpl->parent = $parent;
+                $tpl->tpl_vars = array();
+                $tpl->config_vars = array();
+            } else {
+                $tpl = new $this->template_class($template, clone $this, $parent, $cache_id, $compile_id);
+            }
+        } else {
+            if (isset($this->template_objects[$_templateId])) {
+                // return cached template object
+                $tpl = $this->template_objects[$_templateId];
+                $tpl->parent = $parent;
+                $tpl->tpl_vars = array();
+                $tpl->config_vars = array();
+            } else {
+                $tpl = new $this->template_class($template, $this, $parent, $cache_id, $compile_id);
+            }
+        }
+        // fill data if present
+        if (!empty($data) && is_array($data)) {
+            // set up variable values
+            foreach ($data as $_key => $_val) {
+                $tpl->tpl_vars[$_key] = new Smarty_variable($_val);
+            }
+        }
+
+        return $tpl;
+    }
+
+
+    /**
+     * Takes unknown classes and loads plugin files for them
+     * class name format: Smarty_PluginType_PluginName
+     * plugin filename format: plugintype.pluginname.php
+     *
+     * @param  string $plugin_name class plugin name to load
+     * @param  bool   $check       check if already loaded
+     * @return string |boolean filepath of loaded file or false
+     */
+    public function loadPlugin($plugin_name, $check = true)
+    {
+        // if function or class exists, exit silently (already loaded)
+        if ($check && (is_callable($plugin_name) || class_exists($plugin_name, false))) {
+            return true;
+        }
+        // Plugin name is expected to be: Smarty_[Type]_[Name]
+        $_name_parts = explode('_', $plugin_name, 3);
+        // class name must have three parts to be valid plugin
+        // count($_name_parts) < 3 === !isset($_name_parts[2])
+        if (!isset($_name_parts[2]) || strtolower($_name_parts[0]) !== 'smarty') {
+            throw new SmartyException("plugin {$plugin_name} is not a valid name format");
+
+            return false;
+        }
+        // if type is "internal", get plugin from sysplugins
+        if (strtolower($_name_parts[1]) == 'internal') {
+            $file = SMARTY_SYSPLUGINS_DIR . strtolower($plugin_name) . '.php';
+            if (file_exists($file)) {
+                require_once($file);
+
+                return $file;
+            } else {
+                return false;
+            }
+        }
+        // plugin filename is expected to be: [type].[name].php
+        $_plugin_filename = "{$_name_parts[1]}.{$_name_parts[2]}.php";
+
+        $_stream_resolve_include_path = function_exists('stream_resolve_include_path');
+
+        // loop through plugin dirs and find the plugin
+        foreach ($this->getPluginsDir() as $_plugin_dir) {
+            $names = array(
+                $_plugin_dir . $_plugin_filename,
+                $_plugin_dir . strtolower($_plugin_filename),
+            );
+            foreach ($names as $file) {
+                if (file_exists($file)) {
+                    require_once($file);
+
+                    return $file;
+                }
+                if ($this->use_include_path && !preg_match('/^([\/\\\\]|[a-zA-Z]:[\/\\\\])/', $_plugin_dir)) {
+                    // try PHP include_path
+                    if ($_stream_resolve_include_path) {
+                        $file = stream_resolve_include_path($file);
+                    } else {
+                        $file = Smarty_Internal_Get_Include_Path::getIncludePath($file);
+                    }
+
+                    if ($file !== false) {
+                        require_once($file);
+
+                        return $file;
+                    }
+                }
+            }
+        }
+        // no plugin loaded
+        return false;
+    }
+
+    /**
+     * Compile all template files
+     *
+     * @param  string  $extension     file extension
+     * @param  bool    $force_compile force all to recompile
+     * @param  int     $time_limit
+     * @param  int     $max_errors
+     * @return integer number of template files recompiled
+     */
+    public function compileAllTemplates($extension = '.tpl', $force_compile = false, $time_limit = 0, $max_errors = null)
+    {
+        return Smarty_Internal_Utility::compileAllTemplates($extension, $force_compile, $time_limit, $max_errors, $this);
+    }
+
+    /**
+     * Compile all config files
+     *
+     * @param  string  $extension     file extension
+     * @param  bool    $force_compile force all to recompile
+     * @param  int     $time_limit
+     * @param  int     $max_errors
+     * @return integer number of template files recompiled
+     */
+    public function compileAllConfig($extension = '.conf', $force_compile = false, $time_limit = 0, $max_errors = null)
+    {
+        return Smarty_Internal_Utility::compileAllConfig($extension, $force_compile, $time_limit, $max_errors, $this);
+    }
+
+    /**
+     * Delete compiled template file
+     *
+     * @param  string  $resource_name template name
+     * @param  string  $compile_id    compile id
+     * @param  integer $exp_time      expiration time
+     * @return integer number of template files deleted
+     */
+    public function clearCompiledTemplate($resource_name = null, $compile_id = null, $exp_time = null)
+    {
+        return Smarty_Internal_Utility::clearCompiledTemplate($resource_name, $compile_id, $exp_time, $this);
+    }
+
+
+    /**
+     * Return array of tag/attributes of all tags used by an template
+     *
+     * @param  object $templae template object
+     * @return array  of tag/attributes
+     */
+    public function getTags(Smarty_Internal_Template $template)
+    {
+        return Smarty_Internal_Utility::getTags($template);
+    }
+
+    /**
+     * Run installation test
+     *
+     * @param  array   $errors Array to write errors into, rather than outputting them
+     * @return boolean true if setup is fine, false if something is wrong
+     */
+    public function testInstall(&$errors=null)
+    {
+        return Smarty_Internal_Utility::testInstall($this, $errors);
+    }
+
+    /**
+     * Error Handler to mute expected messages
+     *
+     * @link http://php.net/set_error_handler
+     * @param  integer $errno Error level
+     * @return boolean
+     */
+    public static function mutingErrorHandler($errno, $errstr, $errfile, $errline, $errcontext)
+    {
+        $_is_muted_directory = false;
+
+        // add the SMARTY_DIR to the list of muted directories
+        if (!isset(Smarty::$_muted_directories[SMARTY_DIR])) {
+            $smarty_dir = realpath(SMARTY_DIR);
+            if ($smarty_dir !== false) {
+                Smarty::$_muted_directories[SMARTY_DIR] = array(
+                    'file' => $smarty_dir,
+                    'length' => strlen($smarty_dir),
+                );
+            }
+        }
+
+        // walk the muted directories and test against $errfile
+        foreach (Smarty::$_muted_directories as $key => &$dir) {
+            if (!$dir) {
+                // resolve directory and length for speedy comparisons
+                $file = realpath($key);
+                if ($file === false) {
+                    // this directory does not exist, remove and skip it
+                    unset(Smarty::$_muted_directories[$key]);
+                    continue;
+                }
+                $dir = array(
+                    'file' => $file,
+                    'length' => strlen($file),
+                );
+            }
+            if (!strncmp($errfile, $dir['file'], $dir['length'])) {
+                $_is_muted_directory = true;
+                break;
+            }
+        }
+
+        // pass to next error handler if this error did not occur inside SMARTY_DIR
+        // or the error was within smarty but masked to be ignored
+        if (!$_is_muted_directory || ($errno && $errno & error_reporting())) {
+            if (Smarty::$_previous_error_handler) {
+                return call_user_func(Smarty::$_previous_error_handler, $errno, $errstr, $errfile, $errline, $errcontext);
+            } else {
+                return false;
+            }
+        }
+    }
+
+    /**
+     * Enable error handler to mute expected messages
+     *
+     * @return void
+     */
+    public static function muteExpectedErrors()
+    {
+        /*
+            error muting is done because some people implemented custom error_handlers using
+            http://php.net/set_error_handler and for some reason did not understand the following paragraph:
+
+                It is important to remember that the standard PHP error handler is completely bypassed for the
+                error types specified by error_types unless the callback function returns FALSE.
+                error_reporting() settings will have no effect and your error handler will be called regardless -
+                however you are still able to read the current value of error_reporting and act appropriately.
+                Of particular note is that this value will be 0 if the statement that caused the error was
+                prepended by the @ error-control operator.
+
+            Smarty deliberately uses @filemtime() over file_exists() and filemtime() in some places. Reasons include
+                - @filemtime() is almost twice as fast as using an additional file_exists()
+                - between file_exists() and filemtime() a possible race condition is opened,
+                  which does not exist using the simple @filemtime() approach.
+        */
+        $error_handler = array('Smarty', 'mutingErrorHandler');
+        $previous = set_error_handler($error_handler);
+
+        // avoid dead loops
+        if ($previous !== $error_handler) {
+            Smarty::$_previous_error_handler = $previous;
+        }
+    }
+
+    /**
+     * Disable error handler muting expected messages
+     *
+     * @return void
+     */
+    public static function unmuteExpectedErrors()
+    {
+        restore_error_handler();
+    }
+}
+
+// Check if we're running on windows
+Smarty::$_IS_WINDOWS = strtoupper(substr(PHP_OS, 0, 3)) === 'WIN';
+
+// let PCRE (preg_*) treat strings as ISO-8859-1 if we're not dealing with UTF-8
+if (Smarty::$_CHARSET !== 'UTF-8') {
+    Smarty::$_UTF8_MODIFIER = '';
+}
+
+/**
+ * Smarty exception class
+ * @package Smarty
+ */
+class SmartyException extends Exception
+{
+    public static $escape = false;
+
+    public function __toString()
+    {
+        return ' --> Smarty: ' . (self::$escape ? htmlentities($this->message) : $this->message)  . ' <-- ';
+    }
+}
+
+/**
+ * Smarty compiler exception class
+ * @package Smarty
+ */
+class SmartyCompilerException extends SmartyException
+{
+    public function __toString()
+    {
+        return ' --> Smarty Compiler: ' . $this->message . ' <-- ';
+    }
+    /**
+     * The line number of the template error
+     * @type int|null
+     */
+    public $line = null;
+    /**
+     * The template source snippet relating to the error
+     * @type string|null
+     */
+    public $source = null;
+    /**
+     * The raw text of the error message
+     * @type string|null
+     */
+    public $desc = null;
+    /**
+     * The resource identifier or template name
+     * @type string|null
+     */
+    public $template = null;
+}
+
+/**
+ * Autoloader
+ */
+function smartyAutoload($class)
+{
+    $_class = strtolower($class);
+    static $_classes = array(
+        'smarty_config_source' => true,
+        'smarty_config_compiled' => true,
+        'smarty_security' => true,
+        'smarty_cacheresource' => true,
+        'smarty_cacheresource_custom' => true,
+        'smarty_cacheresource_keyvaluestore' => true,
+        'smarty_resource' => true,
+        'smarty_resource_custom' => true,
+        'smarty_resource_uncompiled' => true,
+        'smarty_resource_recompiled' => true,
+    );
+
+    if (!strncmp($_class, 'smarty_internal_', 16) || isset($_classes[$_class])) {
+        include SMARTY_SYSPLUGINS_DIR . $_class . '.php';
+    }
+}

resources/templates/engine/smarty/Smarty.license.txt

@@ -0,0 +1,165 @@
+                   GNU LESSER GENERAL PUBLIC LICENSE
+                       Version 3, 29 June 2007
+
+ Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+
+  This version of the GNU Lesser General Public License incorporates
+the terms and conditions of version 3 of the GNU General Public
+License, supplemented by the additional permissions listed below.
+
+  0. Additional Definitions.
+
+  As used herein, "this License" refers to version 3 of the GNU Lesser
+General Public License, and the "GNU GPL" refers to version 3 of the GNU
+General Public License.
+
+  "The Library" refers to a covered work governed by this License,
+other than an Application or a Combined Work as defined below.
+
+  An "Application" is any work that makes use of an interface provided
+by the Library, but which is not otherwise based on the Library.
+Defining a subclass of a class defined by the Library is deemed a mode
+of using an interface provided by the Library.
+
+  A "Combined Work" is a work produced by combining or linking an
+Application with the Library.  The particular version of the Library
+with which the Combined Work was made is also called the "Linked
+Version".
+
+  The "Minimal Corresponding Source" for a Combined Work means the
+Corresponding Source for the Combined Work, excluding any source code
+for portions of the Combined Work that, considered in isolation, are
+based on the Application, and not on the Linked Version.
+
+  The "Corresponding Application Code" for a Combined Work means the
+object code and/or source code for the Application, including any data
+and utility programs needed for reproducing the Combined Work from the
+Application, but excluding the System Libraries of the Combined Work.
+
+  1. Exception to Section 3 of the GNU GPL.
+
+  You may convey a covered work under sections 3 and 4 of this License
+without being bound by section 3 of the GNU GPL.
+
+  2. Conveying Modified Versions.
+
+  If you modify a copy of the Library, and, in your modifications, a
+facility refers to a function or data to be supplied by an Application
+that uses the facility (other than as an argument passed when the
+facility is invoked), then you may convey a copy of the modified
+version:
+
+   a) under this License, provided that you make a good faith effort to
+   ensure that, in the event an Application does not supply the
+   function or data, the facility still operates, and performs
+   whatever part of its purpose remains meaningful, or
+
+   b) under the GNU GPL, with none of the additional permissions of
+   this License applicable to that copy.
+
+  3. Object Code Incorporating Material from Library Header Files.
+
+  The object code form of an Application may incorporate material from
+a header file that is part of the Library.  You may convey such object
+code under terms of your choice, provided that, if the incorporated
+material is not limited to numerical parameters, data structure
+layouts and accessors, or small macros, inline functions and templates
+(ten or fewer lines in length), you do both of the following:
+
+   a) Give prominent notice with each copy of the object code that the
+   Library is used in it and that the Library and its use are
+   covered by this License.
+
+   b) Accompany the object code with a copy of the GNU GPL and this license
+   document.
+
+  4. Combined Works.
+
+  You may convey a Combined Work under terms of your choice that,
+taken together, effectively do not restrict modification of the
+portions of the Library contained in the Combined Work and reverse
+engineering for debugging such modifications, if you also do each of
+the following:
+
+   a) Give prominent notice with each copy of the Combined Work that
+   the Library is used in it and that the Library and its use are
+   covered by this License.
+
+   b) Accompany the Combined Work with a copy of the GNU GPL and this license
+   document.
+
+   c) For a Combined Work that displays copyright notices during
+   execution, include the copyright notice for the Library among
+   these notices, as well as a reference directing the user to the
+   copies of the GNU GPL and this license document.
+
+   d) Do one of the following:
+
+       0) Convey the Minimal Corresponding Source under the terms of this
+       License, and the Corresponding Application Code in a form
+       suitable for, and under terms that permit, the user to
+       recombine or relink the Application with a modified version of
+       the Linked Version to produce a modified Combined Work, in the
+       manner specified by section 6 of the GNU GPL for conveying
+       Corresponding Source.
+
+       1) Use a suitable shared library mechanism for linking with the
+       Library.  A suitable mechanism is one that (a) uses at run time
+       a copy of the Library already present on the user's computer
+       system, and (b) will operate properly with a modified version
+       of the Library that is interface-compatible with the Linked
+       Version.
+
+   e) Provide Installation Information, but only if you would otherwise
+   be required to provide such information under section 6 of the
+   GNU GPL, and only to the extent that such information is
+   necessary to install and execute a modified version of the
+   Combined Work produced by recombining or relinking the
+   Application with a modified version of the Linked Version. (If
+   you use option 4d0, the Installation Information must accompany
+   the Minimal Corresponding Source and Corresponding Application
+   Code. If you use option 4d1, you must provide the Installation
+   Information in the manner specified by section 6 of the GNU GPL
+   for conveying Corresponding Source.)
+
+  5. Combined Libraries.
+
+  You may place library facilities that are a work based on the
+Library side by side in a single library together with other library
+facilities that are not Applications and are not covered by this
+License, and convey such a combined library under terms of your
+choice, if you do both of the following:
+
+   a) Accompany the combined library with a copy of the same work based
+   on the Library, uncombined with any other library facilities,
+   conveyed under the terms of this License.
+
+   b) Give prominent notice with the combined library that part of it
+   is a work based on the Library, and explaining where to find the
+   accompanying uncombined form of the same work.
+
+  6. Revised Versions of the GNU Lesser General Public License.
+
+  The Free Software Foundation may publish revised and/or new versions
+of the GNU Lesser General Public License from time to time. Such new
+versions will be similar in spirit to the present version, but may
+differ in detail to address new problems or concerns.
+
+  Each version is given a distinguishing version number. If the
+Library as you received it specifies that a certain numbered version
+of the GNU Lesser General Public License "or any later version"
+applies to it, you have the option of following the terms and
+conditions either of that published version or of any later version
+published by the Free Software Foundation. If the Library as you
+received it does not specify a version number of the GNU Lesser
+General Public License, you may choose any version of the GNU Lesser
+General Public License ever published by the Free Software Foundation.
+
+  If the Library as you received it specifies that a proxy can decide
+whether future versions of the GNU Lesser General Public License shall
+apply, that proxy's public statement of acceptance of any version is
+permanent authorization for you to choose that version for the
+Library.

resources/templates/engine/smarty/debug.tpl

@@ -0,0 +1,133 @@
+{capture name='_smarty_debug' assign=debug_output}
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.1//EN" "http://www.w3.org/TR/xhtml11/DTD/xhtml11.dtd">
+<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en">
+<head>
+    <title>Smarty Debug Console</title>
+<style type="text/css">
+{literal}
+body, h1, h2, td, th, p {
+    font-family: sans-serif;
+    font-weight: normal;
+    font-size: 0.9em;
+    margin: 1px;
+    padding: 0;
+}
+
+h1 {
+    margin: 0;
+    text-align: left;
+    padding: 2px;
+    background-color: #f0c040;
+    color:  black;
+    font-weight: bold;
+    font-size: 1.2em;
+ }
+
+h2 {
+    background-color: #9B410E;
+    color: white;
+    text-align: left;
+    font-weight: bold;
+    padding: 2px;
+    border-top: 1px solid black;
+}
+
+body {
+    background: black; 
+}
+
+p, table, div {
+    background: #f0ead8;
+} 
+
+p {
+    margin: 0;
+    font-style: italic;
+    text-align: center;
+}
+
+table {
+    width: 100%;
+}
+
+th, td {
+    font-family: monospace;
+    vertical-align: top;
+    text-align: left;
+    width: 50%;
+}
+
+td {
+    color: green;
+}
+
+.odd {
+    background-color: #eeeeee;
+}
+
+.even {
+    background-color: #fafafa;
+}
+
+.exectime {
+    font-size: 0.8em;
+    font-style: italic;
+}
+
+#table_assigned_vars th {
+    color: blue;
+}
+
+#table_config_vars th {
+    color: maroon;
+}
+{/literal}
+</style>
+</head>
+<body>
+
+<h1>Smarty Debug Console  -  {if isset($template_name)}{$template_name|debug_print_var nofilter}{else}Total Time {$execution_time|string_format:"%.5f"}{/if}</h1>
+
+{if !empty($template_data)}
+<h2>included templates &amp; config files (load time in seconds)</h2>
+
+<div>
+{foreach $template_data as $template}
+  <font color=brown>{$template.name}</font>
+  <span class="exectime">
+   (compile {$template['compile_time']|string_format:"%.5f"}) (render {$template['render_time']|string_format:"%.5f"}) (cache {$template['cache_time']|string_format:"%.5f"})
+  </span>
+  <br>
+{/foreach}
+</div>
+{/if}
+
+<h2>assigned template variables</h2>
+
+<table id="table_assigned_vars">
+    {foreach $assigned_vars as $vars}
+       <tr class="{if $vars@iteration % 2 eq 0}odd{else}even{/if}">   
+       <th>${$vars@key|escape:'html'}</th>
+       <td>{$vars|debug_print_var nofilter}</td></tr>
+    {/foreach}
+</table>
+
+<h2>assigned config file variables (outer template scope)</h2>
+
+<table id="table_config_vars">
+    {foreach $config_vars as $vars}
+       <tr class="{if $vars@iteration % 2 eq 0}odd{else}even{/if}">   
+       <th>{$vars@key|escape:'html'}</th>
+       <td>{$vars|debug_print_var nofilter}</td></tr>
+    {/foreach}
+
+</table>
+</body>
+</html>
+{/capture}
+<script type="text/javascript">
+{$id = $template_name|default:''|md5}
+    _smarty_console = window.open("","console{$id}","width=680,height=600,resizable,scrollbars=yes");
+    _smarty_console.document.write("{$debug_output|escape:'javascript' nofilter}");
+    _smarty_console.document.close();
+</script>

resources/templates/engine/smarty/plugins/block.textformat.php

@@ -0,0 +1,110 @@
+<?php
+/**
+ * Smarty plugin to format text blocks
+ *
+ * @package Smarty
+ * @subpackage PluginsBlock
+ */
+
+/**
+ * Smarty {textformat}{/textformat} block plugin
+ *
+ * Type:     block function<br>
+ * Name:     textformat<br>
+ * Purpose:  format text a certain way with preset styles
+ *           or custom wrap/indent settings<br>
+ * Params:
+ * <pre>
+ * - style         - string (email)
+ * - indent        - integer (0)
+ * - wrap          - integer (80)
+ * - wrap_char     - string ("\n")
+ * - indent_char   - string (" ")
+ * - wrap_boundary - boolean (true)
+ * </pre>
+ *
+ * @link http://www.smarty.net/manual/en/language.function.textformat.php {textformat}
+ *       (Smarty online manual)
+ * @param array                    $params   parameters
+ * @param string                   $content  contents of the block
+ * @param Smarty_Internal_Template $template template object
+ * @param boolean                  &$repeat  repeat flag
+ * @return string content re-formatted
+ * @author Monte Ohrt <monte at ohrt dot com>
+ */
+function smarty_block_textformat($params, $content, $template, &$repeat)
+{
+    if (is_null($content)) {
+        return;
+    }
+
+    $style = null;
+    $indent = 0;
+    $indent_first = 0;
+    $indent_char = ' ';
+    $wrap = 80;
+    $wrap_char = "\n";
+    $wrap_cut = false;
+    $assign = null;
+
+    foreach ($params as $_key => $_val) {
+        switch ($_key) {
+            case 'style':
+            case 'indent_char':
+            case 'wrap_char':
+            case 'assign':
+                $$_key = (string) $_val;
+                break;
+
+            case 'indent':
+            case 'indent_first':
+            case 'wrap':
+                $$_key = (int) $_val;
+                break;
+
+            case 'wrap_cut':
+                $$_key = (bool) $_val;
+                break;
+
+            default:
+                trigger_error("textformat: unknown attribute '$_key'");
+        }
+    }
+
+    if ($style == 'email') {
+        $wrap = 72;
+    }
+    // split into paragraphs
+    $_paragraphs = preg_split('![\r\n]{2}!', $content);
+    $_output = '';
+
+    foreach ($_paragraphs as &$_paragraph) {
+        if (!$_paragraph) {
+            continue;
+        }
+        // convert mult. spaces & special chars to single space
+        $_paragraph = preg_replace(array('!\s+!' . Smarty::$_UTF8_MODIFIER, '!(^\s+)|(\s+$)!' . Smarty::$_UTF8_MODIFIER), array(' ', ''), $_paragraph);
+        // indent first line
+        if ($indent_first > 0) {
+            $_paragraph = str_repeat($indent_char, $indent_first) . $_paragraph;
+        }
+        // wordwrap sentences
+        if (Smarty::$_MBSTRING) {
+            require_once(SMARTY_PLUGINS_DIR . 'shared.mb_wordwrap.php');
+            $_paragraph = smarty_mb_wordwrap($_paragraph, $wrap - $indent, $wrap_char, $wrap_cut);
+        } else {
+            $_paragraph = wordwrap($_paragraph, $wrap - $indent, $wrap_char, $wrap_cut);
+        }
+        // indent lines
+        if ($indent > 0) {
+            $_paragraph = preg_replace('!^!m', str_repeat($indent_char, $indent), $_paragraph);
+        }
+    }
+    $_output = implode($wrap_char . $wrap_char, $_paragraphs);
+
+    if ($assign) {
+        $template->assign($assign, $_output);
+    } else {
+        return $_output;
+    }
+}

resources/templates/engine/smarty/plugins/function.counter.php

@@ -0,0 +1,76 @@
+<?php
+/**
+ * Smarty plugin
+ * @package Smarty
+ * @subpackage PluginsFunction
+ */
+
+/**
+ * Smarty {counter} function plugin
+ *
+ * Type:     function<br>
+ * Name:     counter<br>
+ * Purpose:  print out a counter value
+ *
+ * @author Monte Ohrt <monte at ohrt dot com>
+ * @link http://www.smarty.net/manual/en/language.function.counter.php {counter}
+ *       (Smarty online manual)
+ * @param array                    $params   parameters
+ * @param Smarty_Internal_Template $template template object
+ * @return string|null
+ */
+function smarty_function_counter($params, $template)
+{
+    static $counters = array();
+
+    $name = (isset($params['name'])) ? $params['name'] : 'default';
+    if (!isset($counters[$name])) {
+        $counters[$name] = array(
+            'start'=>1,
+            'skip'=>1,
+            'direction'=>'up',
+            'count'=>1
+            );
+    }
+    $counter =& $counters[$name];
+
+    if (isset($params['start'])) {
+        $counter['start'] = $counter['count'] = (int) $params['start'];
+    }
+
+    if (!empty($params['assign'])) {
+        $counter['assign'] = $params['assign'];
+    }
+
+    if (isset($counter['assign'])) {
+        $template->assign($counter['assign'], $counter['count']);
+    }
+
+    if (isset($params['print'])) {
+        $print = (bool) $params['print'];
+    } else {
+        $print = empty($counter['assign']);
+    }
+
+    if ($print) {
+        $retval = $counter['count'];
+    } else {
+        $retval = null;
+    }
+
+    if (isset($params['skip'])) {
+        $counter['skip'] = $params['skip'];
+    }
+
+    if (isset($params['direction'])) {
+        $counter['direction'] = $params['direction'];
+    }
+
+    if ($counter['direction'] == "down")
+        $counter['count'] -= $counter['skip'];
+    else
+        $counter['count'] += $counter['skip'];
+
+    return $retval;
+
+}

resources/templates/engine/smarty/plugins/function.cycle.php

@@ -0,0 +1,105 @@
+<?php
+/**
+ * Smarty plugin
+ *
+ * @package Smarty
+ * @subpackage PluginsFunction
+ */
+
+/**
+ * Smarty {cycle} function plugin
+ *
+ * Type:     function<br>
+ * Name:     cycle<br>
+ * Date:     May 3, 2002<br>
+ * Purpose:  cycle through given values<br>
+ * Params:
+ * <pre>
+ * - name      - name of cycle (optional)
+ * - values    - comma separated list of values to cycle, or an array of values to cycle
+ *               (this can be left out for subsequent calls)
+ * - reset     - boolean - resets given var to true
+ * - print     - boolean - print var or not. default is true
+ * - advance   - boolean - whether or not to advance the cycle
+ * - delimiter - the value delimiter, default is ","
+ * - assign    - boolean, assigns to template var instead of printed.
+ * </pre>
+ * Examples:<br>
+ * <pre>
+ * {cycle values="#eeeeee,#d0d0d0d"}
+ * {cycle name=row values="one,two,three" reset=true}
+ * {cycle name=row}
+ * </pre>
+ *
+ * @link http://www.smarty.net/manual/en/language.function.cycle.php {cycle}
+ *       (Smarty online manual)
+ * @author Monte Ohrt <monte at ohrt dot com>
+ * @author credit to Mark Priatel <[email protected]>
+ * @author credit to Gerard <[email protected]>
+ * @author credit to Jason Sweat <[email protected]>
+ * @version  1.3
+ * @param array                    $params   parameters
+ * @param Smarty_Internal_Template $template template object
+ * @return string|null
+ */
+
+function smarty_function_cycle($params, $template)
+{
+    static $cycle_vars;
+
+    $name = (empty($params['name'])) ? 'default' : $params['name'];
+    $print = (isset($params['print'])) ? (bool) $params['print'] : true;
+    $advance = (isset($params['advance'])) ? (bool) $params['advance'] : true;
+    $reset = (isset($params['reset'])) ? (bool) $params['reset'] : false;
+
+    if (!isset($params['values'])) {
+        if (!isset($cycle_vars[$name]['values'])) {
+            trigger_error("cycle: missing 'values' parameter");
+
+            return;
+        }
+    } else {
+        if(isset($cycle_vars[$name]['values'])
+            && $cycle_vars[$name]['values'] != $params['values'] ) {
+            $cycle_vars[$name]['index'] = 0;
+        }
+        $cycle_vars[$name]['values'] = $params['values'];
+    }
+
+    if (isset($params['delimiter'])) {
+        $cycle_vars[$name]['delimiter'] = $params['delimiter'];
+    } elseif (!isset($cycle_vars[$name]['delimiter'])) {
+        $cycle_vars[$name]['delimiter'] = ',';
+    }
+
+    if (is_array($cycle_vars[$name]['values'])) {
+        $cycle_array = $cycle_vars[$name]['values'];
+    } else {
+        $cycle_array = explode($cycle_vars[$name]['delimiter'],$cycle_vars[$name]['values']);
+    }
+
+    if (!isset($cycle_vars[$name]['index']) || $reset ) {
+        $cycle_vars[$name]['index'] = 0;
+    }
+
+    if (isset($params['assign'])) {
+        $print = false;
+        $template->assign($params['assign'], $cycle_array[$cycle_vars[$name]['index']]);
+    }
+
+    if ($print) {
+        $retval = $cycle_array[$cycle_vars[$name]['index']];
+    } else {
+        $retval = null;
+    }
+
+    if ($advance) {
+        if ( $cycle_vars[$name]['index'] >= count($cycle_array) -1 ) {
+            $cycle_vars[$name]['index'] = 0;
+        } else {
+            $cycle_vars[$name]['index']++;
+        }
+    }
+
+    return $retval;
+}

resources/templates/engine/smarty/plugins/function.fetch.php

@@ -0,0 +1,219 @@
+<?php
+/**
+ * Smarty plugin
+ *
+ * @package Smarty
+ * @subpackage PluginsFunction
+ */
+
+/**
+ * Smarty {fetch} plugin
+ *
+ * Type:     function<br>
+ * Name:     fetch<br>
+ * Purpose:  fetch file, web or ftp data and display results
+ *
+ * @link http://www.smarty.net/manual/en/language.function.fetch.php {fetch}
+ *       (Smarty online manual)
+ * @author Monte Ohrt <monte at ohrt dot com>
+ * @param array                    $params   parameters
+ * @param Smarty_Internal_Template $template template object
+ * @return string|null if the assign parameter is passed, Smarty assigns the result to a template variable
+ */
+function smarty_function_fetch($params, $template)
+{
+    if (empty($params['file'])) {
+        trigger_error("[plugin] fetch parameter 'file' cannot be empty",E_USER_NOTICE);
+
+        return;
+    }
+
+    // strip file protocol
+    if (stripos($params['file'], 'file://') === 0) {
+        $params['file'] = substr($params['file'], 7);
+    }
+
+    $protocol = strpos($params['file'], '://');
+    if ($protocol !== false) {
+        $protocol = strtolower(substr($params['file'], 0, $protocol));
+    }
+
+    if (isset($template->smarty->security_policy)) {
+        if ($protocol) {
+            // remote resource (or php stream, …)
+            if (!$template->smarty->security_policy->isTrustedUri($params['file'])) {
+                return;
+            }
+        } else {
+            // local file
+            if (!$template->smarty->security_policy->isTrustedResourceDir($params['file'])) {
+                return;
+            }
+        }
+    }
+
+    $content = '';
+    if ($protocol == 'http') {
+        // http fetch
+        if ($uri_parts = parse_url($params['file'])) {
+            // set defaults
+            $host = $server_name = $uri_parts['host'];
+            $timeout = 30;
+            $accept = "image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, */*";
+            $agent = "Smarty Template Engine ". Smarty::SMARTY_VERSION;
+            $referer = "";
+            $uri = !empty($uri_parts['path']) ? $uri_parts['path'] : '/';
+            $uri .= !empty($uri_parts['query']) ? '?' . $uri_parts['query'] : '';
+            $_is_proxy = false;
+            if (empty($uri_parts['port'])) {
+                $port = 80;
+            } else {
+                $port = $uri_parts['port'];
+            }
+            if (!empty($uri_parts['user'])) {
+                $user = $uri_parts['user'];
+            }
+            if (!empty($uri_parts['pass'])) {
+                $pass = $uri_parts['pass'];
+            }
+            // loop through parameters, setup headers
+            foreach ($params as $param_key => $param_value) {
+                switch ($param_key) {
+                    case "file":
+                    case "assign":
+                    case "assign_headers":
+                        break;
+                    case "user":
+                        if (!empty($param_value)) {
+                            $user = $param_value;
+                        }
+                        break;
+                    case "pass":
+                        if (!empty($param_value)) {
+                            $pass = $param_value;
+                        }
+                        break;
+                    case "accept":
+                        if (!empty($param_value)) {
+                            $accept = $param_value;
+                        }
+                        break;
+                    case "header":
+                        if (!empty($param_value)) {
+                            if (!preg_match('![\w\d-]+: .+!',$param_value)) {
+                                trigger_error("[plugin] invalid header format '".$param_value."'",E_USER_NOTICE);
+
+                                return;
+                            } else {
+                                $extra_headers[] = $param_value;
+                            }
+                        }
+                        break;
+                    case "proxy_host":
+                        if (!empty($param_value)) {
+                            $proxy_host = $param_value;
+                        }
+                        break;
+                    case "proxy_port":
+                        if (!preg_match('!\D!', $param_value)) {
+                            $proxy_port = (int) $param_value;
+                        } else {
+                            trigger_error("[plugin] invalid value for attribute '".$param_key."'",E_USER_NOTICE);
+
+                            return;
+                        }
+                        break;
+                    case "agent":
+                        if (!empty($param_value)) {
+                            $agent = $param_value;
+                        }
+                        break;
+                    case "referer":
+                        if (!empty($param_value)) {
+                            $referer = $param_value;
+                        }
+                        break;
+                    case "timeout":
+                        if (!preg_match('!\D!', $param_value)) {
+                            $timeout = (int) $param_value;
+                        } else {
+                            trigger_error("[plugin] invalid value for attribute '".$param_key."'",E_USER_NOTICE);
+
+                            return;
+                        }
+                        break;
+                    default:
+                        trigger_error("[plugin] unrecognized attribute '".$param_key."'",E_USER_NOTICE);
+
+                        return;
+                }
+            }
+            if (!empty($proxy_host) && !empty($proxy_port)) {
+                $_is_proxy = true;
+                $fp = fsockopen($proxy_host,$proxy_port,$errno,$errstr,$timeout);
+            } else {
+                $fp = fsockopen($server_name,$port,$errno,$errstr,$timeout);
+            }
+
+            if (!$fp) {
+                trigger_error("[plugin] unable to fetch: $errstr ($errno)",E_USER_NOTICE);
+
+                return;
+            } else {
+                if ($_is_proxy) {
+                    fputs($fp, 'GET ' . $params['file'] . " HTTP/1.0\r\n");
+                } else {
+                    fputs($fp, "GET $uri HTTP/1.0\r\n");
+                }
+                if (!empty($host)) {
+                    fputs($fp, "Host: $host\r\n");
+                }
+                if (!empty($accept)) {
+                    fputs($fp, "Accept: $accept\r\n");
+                }
+                if (!empty($agent)) {
+                    fputs($fp, "User-Agent: $agent\r\n");
+                }
+                if (!empty($referer)) {
+                    fputs($fp, "Referer: $referer\r\n");
+                }
+                if (isset($extra_headers) && is_array($extra_headers)) {
+                    foreach ($extra_headers as $curr_header) {
+                        fputs($fp, $curr_header."\r\n");
+                    }
+                }
+                if (!empty($user) && !empty($pass)) {
+                    fputs($fp, "Authorization: BASIC ".base64_encode("$user:$pass")."\r\n");
+                }
+
+                fputs($fp, "\r\n");
+                while (!feof($fp)) {
+                    $content .= fgets($fp,4096);
+                }
+                fclose($fp);
+                $csplit = preg_split("!\r\n\r\n!",$content,2);
+
+                $content = $csplit[1];
+
+                if (!empty($params['assign_headers'])) {
+                    $template->assign($params['assign_headers'],preg_split("!\r\n!",$csplit[0]));
+                }
+            }
+        } else {
+            trigger_error("[plugin fetch] unable to parse URL, check syntax",E_USER_NOTICE);
+
+            return;
+        }
+    } else {
+        $content = @file_get_contents($params['file']);
+        if ($content === false) {
+            throw new SmartyException("{fetch} cannot read resource '" . $params['file'] ."'");
+        }
+    }
+
+    if (!empty($params['assign'])) {
+        $template->assign($params['assign'], $content);
+    } else {
+        return $content;
+    }
+}

resources/templates/engine/smarty/plugins/function.html_checkboxes.php

@@ -0,0 +1,235 @@
+<?php
+/**
+ * Smarty plugin
+ *
+ * @package Smarty
+ * @subpackage PluginsFunction
+ */
+
+/**
+ * Smarty {html_checkboxes} function plugin
+ *
+ * File:       function.html_checkboxes.php<br>
+ * Type:       function<br>
+ * Name:       html_checkboxes<br>
+ * Date:       24.Feb.2003<br>
+ * Purpose:    Prints out a list of checkbox input types<br>
+ * Examples:
+ * <pre>
+ * {html_checkboxes values=$ids output=$names}
+ * {html_checkboxes values=$ids name='box' separator='<br>' output=$names}
+ * {html_checkboxes values=$ids checked=$checked separator='<br>' output=$names}
+ * </pre>
+ * Params:
+ * <pre>
+ * - name       (optional) - string default "checkbox"
+ * - values     (required) - array
+ * - options    (optional) - associative array
+ * - checked    (optional) - array default not set
+ * - separator  (optional) - ie <br> or &nbsp;
+ * - output     (optional) - the output next to each checkbox
+ * - assign     (optional) - assign the output as an array to this variable
+ * - escape     (optional) - escape the content (not value), defaults to true
+ * </pre>
+ *
+ * @link http://www.smarty.net/manual/en/language.function.html.checkboxes.php {html_checkboxes}
+ *      (Smarty online manual)
+ * @author     Christopher Kvarme <[email protected]>
+ * @author credits to Monte Ohrt <monte at ohrt dot com>
+ * @version    1.0
+ * @param array $params parameters
+ * @param object $template template object
+ * @return string
+ * @uses smarty_function_escape_special_chars()
+ */
+function smarty_function_html_checkboxes($params, $template)
+{
+    require_once(SMARTY_PLUGINS_DIR . 'shared.escape_special_chars.php');
+
+    $name = 'checkbox';
+    $values = null;
+    $options = null;
+    $selected = array();
+    $separator = '';
+    $escape = true;
+    $labels = true;
+    $label_ids = false;
+    $output = null;
+
+    $extra = '';
+
+    foreach ($params as $_key => $_val) {
+        switch ($_key) {
+            case 'name':
+            case 'separator':
+                $$_key = (string) $_val;
+                break;
+
+            case 'escape':
+            case 'labels':
+            case 'label_ids':
+                $$_key = (bool) $_val;
+                break;
+
+            case 'options':
+                $$_key = (array) $_val;
+                break;
+
+            case 'values':
+            case 'output':
+                $$_key = array_values((array) $_val);
+                break;
+
+            case 'checked':
+            case 'selected':
+                if (is_array($_val)) {
+                    $selected = array();
+                    foreach ($_val as $_sel) {
+                        if (is_object($_sel)) {
+                            if (method_exists($_sel, "__toString")) {
+                                $_sel = smarty_function_escape_special_chars((string) $_sel->__toString());
+                            } else {
+                                trigger_error("html_checkboxes: selected attribute contains an object of class '". get_class($_sel) ."' without __toString() method", E_USER_NOTICE);
+                                continue;
+                            }
+                        } else {
+                            $_sel = smarty_function_escape_special_chars((string) $_sel);
+                        }
+                        $selected[$_sel] = true;
+                    }
+                } elseif (is_object($_val)) {
+                    if (method_exists($_val, "__toString")) {
+                        $selected = smarty_function_escape_special_chars((string) $_val->__toString());
+                    } else {
+                        trigger_error("html_checkboxes: selected attribute is an object of class '". get_class($_val) ."' without __toString() method", E_USER_NOTICE);
+                    }
+                } else {
+                    $selected = smarty_function_escape_special_chars((string) $_val);
+                }
+                break;
+
+            case 'checkboxes':
+                trigger_error('html_checkboxes: the use of the "checkboxes" attribute is deprecated, use "options" instead', E_USER_WARNING);
+                $options = (array) $_val;
+                break;
+
+            case 'assign':
+                break;
+
+            case 'strict': break;
+
+            case 'disabled':
+            case 'readonly':
+                if (!empty($params['strict'])) {
+                    if (!is_scalar($_val)) {
+                        trigger_error("html_options: $_key attribute must be a scalar, only boolean true or string '$_key' will actually add the attribute", E_USER_NOTICE);
+                    }
+
+                    if ($_val === true || $_val === $_key) {
+                        $extra .= ' ' . $_key . '="' . smarty_function_escape_special_chars($_key) . '"';
+                    }
+
+                    break;
+                }
+                // omit break; to fall through!
+
+            default:
+                if (!is_array($_val)) {
+                    $extra .= ' '.$_key.'="'.smarty_function_escape_special_chars($_val).'"';
+                } else {
+                    trigger_error("html_checkboxes: extra attribute '$_key' cannot be an array", E_USER_NOTICE);
+                }
+                break;
+        }
+    }
+
+    if (!isset($options) && !isset($values))
+        return ''; /* raise error here? */
+
+    $_html_result = array();
+
+    if (isset($options)) {
+        foreach ($options as $_key=>$_val) {
+            $_html_result[] = smarty_function_html_checkboxes_output($name, $_key, $_val, $selected, $extra, $separator, $labels, $label_ids, $escape);
+        }
+    } else {
+        foreach ($values as $_i=>$_key) {
+            $_val = isset($output[$_i]) ? $output[$_i] : '';
+            $_html_result[] = smarty_function_html_checkboxes_output($name, $_key, $_val, $selected, $extra, $separator, $labels, $label_ids, $escape);
+        }
+    }
+
+    if (!empty($params['assign'])) {
+        $template->assign($params['assign'], $_html_result);
+    } else {
+        return implode("\n", $_html_result);
+    }
+
+}
+
+function smarty_function_html_checkboxes_output($name, $value, $output, $selected, $extra, $separator, $labels, $label_ids, $escape=true)
+{
+    $_output = '';
+
+    if (is_object($value)) {
+        if (method_exists($value, "__toString")) {
+            $value = (string) $value->__toString();
+        } else {
+            trigger_error("html_options: value is an object of class '". get_class($value) ."' without __toString() method", E_USER_NOTICE);
+
+            return '';
+        }
+    } else {
+        $value = (string) $value;
+    }
+
+    if (is_object($output)) {
+        if (method_exists($output, "__toString")) {
+            $output = (string) $output->__toString();
+        } else {
+            trigger_error("html_options: output is an object of class '". get_class($output) ."' without __toString() method", E_USER_NOTICE);
+
+            return '';
+        }
+    } else {
+        $output = (string) $output;
+    }
+
+    if ($labels) {
+        if ($label_ids) {
+            $_id = smarty_function_escape_special_chars(preg_replace('![^\w\-\.]!' . Smarty::$_UTF8_MODIFIER, '_', $name . '_' . $value));
+            $_output .= '<label for="' . $_id . '">';
+        } else {
+            $_output .= '<label>';
+        }
+    }
+
+    $name = smarty_function_escape_special_chars($name);
+    $value = smarty_function_escape_special_chars($value);
+    if ($escape) {
+        $output = smarty_function_escape_special_chars($output);
+    }
+
+    $_output .= '<input type="checkbox" name="' . $name . '[]" value="' . $value . '"';
+
+    if ($labels && $label_ids) {
+        $_output .= ' id="' . $_id . '"';
+    }
+
+    if (is_array($selected)) {
+        if (isset($selected[$value])) {
+            $_output .= ' checked="checked"';
+        }
+    } elseif ($value === $selected) {
+        $_output .= ' checked="checked"';
+    }
+
+    $_output .= $extra . ' />' . $output;
+    if ($labels) {
+        $_output .= '</label>';
+    }
+
+    $_output .=  $separator;
+
+    return $_output;
+}

resources/templates/engine/smarty/plugins/function.html_image.php

@@ -0,0 +1,161 @@
+<?php
+/**
+ * Smarty plugin
+ *
+ * @package Smarty
+ * @subpackage PluginsFunction
+ */
+
+/**
+ * Smarty {html_image} function plugin
+ *
+ * Type:     function<br>
+ * Name:     html_image<br>
+ * Date:     Feb 24, 2003<br>
+ * Purpose:  format HTML tags for the image<br>
+ * Examples: {html_image file="/images/masthead.gif"}<br>
+ * Output:   <img src="/images/masthead.gif" width=400 height=23><br>
+ * Params:
+ * <pre>
+ * - file        - (required) - file (and path) of image
+ * - height      - (optional) - image height (default actual height)
+ * - width       - (optional) - image width (default actual width)
+ * - basedir     - (optional) - base directory for absolute paths, default is environment variable DOCUMENT_ROOT
+ * - path_prefix - prefix for path output (optional, default empty)
+ * </pre>
+ *
+ * @link http://www.smarty.net/manual/en/language.function.html.image.php {html_image}
+ *      (Smarty online manual)
+ * @author Monte Ohrt <monte at ohrt dot com>
+ * @author credits to Duda <[email protected]>
+ * @version 1.0
+ * @param array                    $params   parameters
+ * @param Smarty_Internal_Template $template template object
+ * @return string
+ * @uses smarty_function_escape_special_chars()
+ */
+function smarty_function_html_image($params, $template)
+{
+    require_once(SMARTY_PLUGINS_DIR . 'shared.escape_special_chars.php');
+
+    $alt = '';
+    $file = '';
+    $height = '';
+    $width = '';
+    $extra = '';
+    $prefix = '';
+    $suffix = '';
+    $path_prefix = '';
+    $basedir = isset($_SERVER['DOCUMENT_ROOT']) ? $_SERVER['DOCUMENT_ROOT'] : '';
+    foreach ($params as $_key => $_val) {
+        switch ($_key) {
+            case 'file':
+            case 'height':
+            case 'width':
+            case 'dpi':
+            case 'path_prefix':
+            case 'basedir':
+                $$_key = $_val;
+                break;
+
+            case 'alt':
+                if (!is_array($_val)) {
+                    $$_key = smarty_function_escape_special_chars($_val);
+                } else {
+                    throw new SmartyException ("html_image: extra attribute '$_key' cannot be an array", E_USER_NOTICE);
+                }
+                break;
+
+            case 'link':
+            case 'href':
+                $prefix = '<a href="' . $_val . '">';
+                $suffix = '</a>';
+                break;
+
+            default:
+                if (!is_array($_val)) {
+                    $extra .= ' ' . $_key . '="' . smarty_function_escape_special_chars($_val) . '"';
+                } else {
+                    throw new SmartyException ("html_image: extra attribute '$_key' cannot be an array", E_USER_NOTICE);
+                }
+                break;
+        }
+    }
+
+    if (empty($file)) {
+        trigger_error("html_image: missing 'file' parameter", E_USER_NOTICE);
+
+        return;
+    }
+
+    if ($file[0] == '/') {
+        $_image_path = $basedir . $file;
+    } else {
+        $_image_path = $file;
+    }
+
+    // strip file protocol
+    if (stripos($params['file'], 'file://') === 0) {
+        $params['file'] = substr($params['file'], 7);
+    }
+
+    $protocol = strpos($params['file'], '://');
+    if ($protocol !== false) {
+        $protocol = strtolower(substr($params['file'], 0, $protocol));
+    }
+
+    if (isset($template->smarty->security_policy)) {
+        if ($protocol) {
+            // remote resource (or php stream, …)
+            if (!$template->smarty->security_policy->isTrustedUri($params['file'])) {
+                return;
+            }
+        } else {
+            // local file
+            if (!$template->smarty->security_policy->isTrustedResourceDir($params['file'])) {
+                return;
+            }
+        }
+    }
+
+    if (!isset($params['width']) || !isset($params['height'])) {
+        // FIXME: (rodneyrehm) getimagesize() loads the complete file off a remote resource, use custom [jpg,png,gif]header reader!
+        if (!$_image_data = @getimagesize($_image_path)) {
+            if (!file_exists($_image_path)) {
+                trigger_error("html_image: unable to find '$_image_path'", E_USER_NOTICE);
+
+                return;
+            } elseif (!is_readable($_image_path)) {
+                trigger_error("html_image: unable to read '$_image_path'", E_USER_NOTICE);
+
+                return;
+            } else {
+                trigger_error("html_image: '$_image_path' is not a valid image file", E_USER_NOTICE);
+
+                return;
+            }
+        }
+
+        if (!isset($params['width'])) {
+            $width = $_image_data[0];
+        }
+        if (!isset($params['height'])) {
+            $height = $_image_data[1];
+        }
+    }
+
+    if (isset($params['dpi'])) {
+        if (strstr($_SERVER['HTTP_USER_AGENT'], 'Mac')) {
+            // FIXME: (rodneyrehm) wrong dpi assumption
+            // don't know who thought this up… even if it was true in 1998, it's definitely wrong in 2011.
+            $dpi_default = 72;
+        } else {
+            $dpi_default = 96;
+        }
+        $_resize = $dpi_default / $params['dpi'];
+        $width = round($width * $_resize);
+        $height = round($height * $_resize);
+    }
+
+    return $prefix . '<img src="' . $path_prefix . $file . '" alt="' . $alt . '" width="' . $width . '" height="' . $height . '"' . $extra . ' />' . $suffix;
+}

resources/templates/engine/smarty/plugins/function.html_options.php

@@ -0,0 +1,195 @@
+<?php
+/**
+ * Smarty plugin
+ *
+ * @package Smarty
+ * @subpackage PluginsFunction
+ */
+
+/**
+ * Smarty {html_options} function plugin
+ *
+ * Type:     function<br>
+ * Name:     html_options<br>
+ * Purpose:  Prints the list of <option> tags generated from
+ *           the passed parameters<br>
+ * Params:
+ * <pre>
+ * - name       (optional) - string default "select"
+ * - values     (required) - if no options supplied) - array
+ * - options    (required) - if no values supplied) - associative array
+ * - selected   (optional) - string default not set
+ * - output     (required) - if not options supplied) - array
+ * - id         (optional) - string default not set
+ * - class      (optional) - string default not set
+ * </pre>
+ *
+ * @link http://www.smarty.net/manual/en/language.function.html.options.php {html_image}
+ *      (Smarty online manual)
+ * @author Monte Ohrt <monte at ohrt dot com>
+ * @author Ralf Strehle (minor optimization) <ralf dot strehle at yahoo dot de>
+ * @param array                    $params   parameters
+ * @param Smarty_Internal_Template $template template object
+ * @return string
+ * @uses smarty_function_escape_special_chars()
+ */
+function smarty_function_html_options($params, $template)
+{
+    require_once(SMARTY_PLUGINS_DIR . 'shared.escape_special_chars.php');
+
+    $name = null;
+    $values = null;
+    $options = null;
+    $selected = null;
+    $output = null;
+    $id = null;
+    $class = null;
+
+    $extra = '';
+
+    foreach ($params as $_key => $_val) {
+        switch ($_key) {
+            case 'name':
+            case 'class':
+            case 'id':
+                $$_key = (string) $_val;
+                break;
+
+            case 'options':
+                $options = (array) $_val;
+                break;
+
+            case 'values':
+            case 'output':
+                $$_key = array_values((array) $_val);
+                break;
+
+            case 'selected':
+                if (is_array($_val)) {
+                    $selected = array();
+                    foreach ($_val as $_sel) {
+                        if (is_object($_sel)) {
+                            if (method_exists($_sel, "__toString")) {
+                                $_sel = smarty_function_escape_special_chars((string) $_sel->__toString());
+                            } else {
+                                trigger_error("html_options: selected attribute contains an object of class '". get_class($_sel) ."' without __toString() method", E_USER_NOTICE);
+                                continue;
+                            }
+                        } else {
+                            $_sel = smarty_function_escape_special_chars((string) $_sel);
+                        }
+                        $selected[$_sel] = true;
+                    }
+                } elseif (is_object($_val)) {
+                    if (method_exists($_val, "__toString")) {
+                        $selected = smarty_function_escape_special_chars((string) $_val->__toString());
+                    } else {
+                        trigger_error("html_options: selected attribute is an object of class '". get_class($_val) ."' without __toString() method", E_USER_NOTICE);
+                    }
+                } else {
+                    $selected = smarty_function_escape_special_chars((string) $_val);
+                }
+                break;
+
+            case 'strict': break;
+
+            case 'disabled':
+            case 'readonly':
+                if (!empty($params['strict'])) {
+                    if (!is_scalar($_val)) {
+                        trigger_error("html_options: $_key attribute must be a scalar, only boolean true or string '$_key' will actually add the attribute", E_USER_NOTICE);
+                    }
+
+                    if ($_val === true || $_val === $_key) {
+                        $extra .= ' ' . $_key . '="' . smarty_function_escape_special_chars($_key) . '"';
+                    }
+
+                    break;
+                }
+                // omit break; to fall through!
+
+            default:
+                if (!is_array($_val)) {
+                    $extra .= ' ' . $_key . '="' . smarty_function_escape_special_chars($_val) . '"';
+                } else {
+                    trigger_error("html_options: extra attribute '$_key' cannot be an array", E_USER_NOTICE);
+                }
+                break;
+        }
+    }
+
+    if (!isset($options) && !isset($values)) {
+        /* raise error here? */
+
+        return '';
+    }
+
+    $_html_result = '';
+    $_idx = 0;
+
+    if (isset($options)) {
+        foreach ($options as $_key => $_val) {
+            $_html_result .= smarty_function_html_options_optoutput($_key, $_val, $selected, $id, $class, $_idx);
+        }
+    } else {
+        foreach ($values as $_i => $_key) {
+            $_val = isset($output[$_i]) ? $output[$_i] : '';
+            $_html_result .= smarty_function_html_options_optoutput($_key, $_val, $selected, $id, $class, $_idx);
+        }
+    }
+
+    if (!empty($name)) {
+        $_html_class = !empty($class) ? ' class="'.$class.'"' : '';
+        $_html_id = !empty($id) ? ' id="'.$id.'"' : '';
+        $_html_result = '<select name="' . $name . '"' . $_html_class . $_html_id . $extra . '>' . "\n" . $_html_result . '</select>' . "\n";
+    }
+
+    return $_html_result;
+}
+
+function smarty_function_html_options_optoutput($key, $value, $selected, $id, $class, &$idx)
+{
+    if (!is_array($value)) {
+        $_key = smarty_function_escape_special_chars($key);
+        $_html_result = '<option value="' . $_key . '"';
+        if (is_array($selected)) {
+            if (isset($selected[$_key])) {
+                $_html_result .= ' selected="selected"';
+            }
+        } elseif ($_key === $selected) {
+            $_html_result .= ' selected="selected"';
+        }
+        $_html_class = !empty($class) ? ' class="'.$class.' option"' : '';
+        $_html_id = !empty($id) ? ' id="'.$id.'-'.$idx.'"' : '';
+        if (is_object($value)) {
+            if (method_exists($value, "__toString")) {
+                $value = smarty_function_escape_special_chars((string) $value->__toString());
+            } else {
+                trigger_error("html_options: value is an object of class '". get_class($value) ."' without __toString() method", E_USER_NOTICE);
+
+                return '';
+            }
+        } else {
+            $value = smarty_function_escape_special_chars((string) $value);
+        }
+        $_html_result .= $_html_class . $_html_id . '>' . $value . '</option>' . "\n";
+        $idx++;
+    } else {
+        $_idx = 0;
+        $_html_result = smarty_function_html_options_optgroup($key, $value, $selected, !empty($id) ? ($id.'-'.$idx) : null, $class, $_idx);
+        $idx++;
+    }
+
+    return $_html_result;
+}
+
+function smarty_function_html_options_optgroup($key, $values, $selected, $id, $class, &$idx)
+{
+    $optgroup_html = '<optgroup label="' . smarty_function_escape_special_chars($key) . '">' . "\n";
+    foreach ($values as $key => $value) {
+        $optgroup_html .= smarty_function_html_options_optoutput($key, $value, $selected, $id, $class, $idx);
+    }
+    $optgroup_html .= "</optgroup>\n";
+
+    return $optgroup_html;
+}

resources/templates/engine/smarty/plugins/function.html_radios.php

@@ -0,0 +1,219 @@
+<?php
+/**
+ * Smarty plugin
+ *
+ * @package Smarty
+ * @subpackage PluginsFunction
+ */
+
+/**
+ * Smarty {html_radios} function plugin
+ *
+ * File:       function.html_radios.php<br>
+ * Type:       function<br>
+ * Name:       html_radios<br>
+ * Date:       24.Feb.2003<br>
+ * Purpose:    Prints out a list of radio input types<br>
+ * Params:
+ * <pre>
+ * - name       (optional) - string default "radio"
+ * - values     (required) - array
+ * - options    (required) - associative array
+ * - checked    (optional) - array default not set
+ * - separator  (optional) - ie <br> or &nbsp;
+ * - output     (optional) - the output next to each radio button
+ * - assign     (optional) - assign the output as an array to this variable
+ * - escape     (optional) - escape the content (not value), defaults to true
+ * </pre>
+ * Examples:
+ * <pre>
+ * {html_radios values=$ids output=$names}
+ * {html_radios values=$ids name='box' separator='<br>' output=$names}
+ * {html_radios values=$ids checked=$checked separator='<br>' output=$names}
+ * </pre>
+ *
+ * @link http://smarty.php.net/manual/en/language.function.html.radios.php {html_radios}
+ *      (Smarty online manual)
+ * @author Christopher Kvarme <[email protected]>
+ * @author credits to Monte Ohrt <monte at ohrt dot com>
+ * @version 1.0
+ * @param array                    $params   parameters
+ * @param Smarty_Internal_Template $template template object
+ * @return string
+ * @uses smarty_function_escape_special_chars()
+ */
+function smarty_function_html_radios($params, $template)
+{
+    require_once(SMARTY_PLUGINS_DIR . 'shared.escape_special_chars.php');
+
+    $name = 'radio';
+    $values = null;
+    $options = null;
+    $selected = null;
+    $separator = '';
+    $escape = true;
+    $labels = true;
+    $label_ids = false;
+    $output = null;
+    $extra = '';
+
+    foreach ($params as $_key => $_val) {
+        switch ($_key) {
+            case 'name':
+            case 'separator':
+                $$_key = (string) $_val;
+                break;
+
+            case 'checked':
+            case 'selected':
+                if (is_array($_val)) {
+                    trigger_error('html_radios: the "' . $_key . '" attribute cannot be an array', E_USER_WARNING);
+                } elseif (is_object($_val)) {
+                    if (method_exists($_val, "__toString")) {
+                        $selected = smarty_function_escape_special_chars((string) $_val->__toString());
+                    } else {
+                        trigger_error("html_radios: selected attribute is an object of class '". get_class($_val) ."' without __toString() method", E_USER_NOTICE);
+                    }
+                } else {
+                    $selected = (string) $_val;
+                }
+                break;
+
+            case 'escape':
+            case 'labels':
+            case 'label_ids':
+                $$_key = (bool) $_val;
+                break;
+
+            case 'options':
+                $$_key = (array) $_val;
+                break;
+
+            case 'values':
+            case 'output':
+                $$_key = array_values((array) $_val);
+                break;
+
+            case 'radios':
+                trigger_error('html_radios: the use of the "radios" attribute is deprecated, use "options" instead', E_USER_WARNING);
+                $options = (array) $_val;
+                break;
+
+            case 'assign':
+                break;
+
+            case 'strict': break;
+
+            case 'disabled':
+            case 'readonly':
+                if (!empty($params['strict'])) {
+                    if (!is_scalar($_val)) {
+                        trigger_error("html_options: $_key attribute must be a scalar, only boolean true or string '$_key' will actually add the attribute", E_USER_NOTICE);
+                    }
+
+                    if ($_val === true || $_val === $_key) {
+                        $extra .= ' ' . $_key . '="' . smarty_function_escape_special_chars($_key) . '"';
+                    }
+
+                    break;
+                }
+                // omit break; to fall through!
+
+            default:
+                if (!is_array($_val)) {
+                    $extra .= ' ' . $_key . '="' . smarty_function_escape_special_chars($_val) . '"';
+                } else {
+                    trigger_error("html_radios: extra attribute '$_key' cannot be an array", E_USER_NOTICE);
+                }
+                break;
+        }
+    }
+
+    if (!isset($options) && !isset($values)) {
+        /* raise error here? */
+
+        return '';
+    }
+
+    $_html_result = array();
+
+    if (isset($options)) {
+        foreach ($options as $_key => $_val) {
+            $_html_result[] = smarty_function_html_radios_output($name, $_key, $_val, $selected, $extra, $separator, $labels, $label_ids, $escape);
+        }
+    } else {
+        foreach ($values as $_i => $_key) {
+            $_val = isset($output[$_i]) ? $output[$_i] : '';
+            $_html_result[] = smarty_function_html_radios_output($name, $_key, $_val, $selected, $extra, $separator, $labels, $label_ids, $escape);
+        }
+    }
+
+    if (!empty($params['assign'])) {
+        $template->assign($params['assign'], $_html_result);
+    } else {
+        return implode("\n", $_html_result);
+    }
+}
+
+function smarty_function_html_radios_output($name, $value, $output, $selected, $extra, $separator, $labels, $label_ids, $escape)
+{
+    $_output = '';
+
+    if (is_object($value)) {
+        if (method_exists($value, "__toString")) {
+            $value = (string) $value->__toString();
+        } else {
+            trigger_error("html_options: value is an object of class '". get_class($value) ."' without __toString() method", E_USER_NOTICE);
+
+            return '';
+        }
+    } else {
+        $value = (string) $value;
+    }
+
+    if (is_object($output)) {
+        if (method_exists($output, "__toString")) {
+            $output = (string) $output->__toString();
+        } else {
+            trigger_error("html_options: output is an object of class '". get_class($output) ."' without __toString() method", E_USER_NOTICE);
+
+            return '';
+        }
+    } else {
+        $output = (string) $output;
+    }
+
+    if ($labels) {
+        if ($label_ids) {
+            $_id = smarty_function_escape_special_chars(preg_replace('![^\w\-\.]!' . Smarty::$_UTF8_MODIFIER, '_', $name . '_' . $value));
+            $_output .= '<label for="' . $_id . '">';
+        } else {
+            $_output .= '<label>';
+        }
+    }
+
+    $name = smarty_function_escape_special_chars($name);
+    $value = smarty_function_escape_special_chars($value);
+    if ($escape) {
+        $output = smarty_function_escape_special_chars($output);
+    }
+
+    $_output .= '<input type="radio" name="' . $name . '" value="' . $value . '"';
+
+    if ($labels && $label_ids) {
+        $_output .= ' id="' . $_id . '"';
+    }
+
+    if ($value === $selected) {
+        $_output .= ' checked="checked"';
+    }
+
+    $_output .= $extra . ' />' . $output;
+    if ($labels) {
+        $_output .= '</label>';
+    }
+
+    $_output .= $separator;
+
+    return $_output;
+}

resources/templates/engine/smarty/plugins/function.html_select_date.php

@@ -0,0 +1,393 @@
+<?php
+/**
+ * Smarty plugin
+ *
+ * @package Smarty
+ * @subpackage PluginsFunction
+ */
+
+/**
+ * @ignore
+ */
+require_once(SMARTY_PLUGINS_DIR . 'shared.escape_special_chars.php');
+/**
+ * @ignore
+ */
+require_once(SMARTY_PLUGINS_DIR . 'shared.make_timestamp.php');
+
+/**
+ * Smarty {html_select_date} plugin
+ *
+ * Type:     function<br>
+ * Name:     html_select_date<br>
+ * Purpose:  Prints the dropdowns for date selection.
+ *
+ * ChangeLog:
+ * <pre>
+ *            - 1.0 initial release
+ *            - 1.1 added support for +/- N syntax for begin
+ *              and end year values. (Monte)
+ *            - 1.2 added support for yyyy-mm-dd syntax for
+ *              time value. (Jan Rosier)
+ *            - 1.3 added support for choosing format for
+ *              month values (Gary Loescher)
+ *            - 1.3.1 added support for choosing format for
+ *              day values (Marcus Bointon)
+ *            - 1.3.2 support negative timestamps, force year
+ *              dropdown to include given date unless explicitly set (Monte)
+ *            - 1.3.4 fix behaviour of 0000-00-00 00:00:00 dates to match that
+ *              of 0000-00-00 dates (cybot, boots)
+ *            - 2.0 complete rewrite for performance,
+ *              added attributes month_names, *_id
+ * </pre>
+ *
+ * @link http://www.smarty.net/manual/en/language.function.html.select.date.php {html_select_date}
+ *      (Smarty online manual)
+ * @version 2.0
+ * @author Andrei Zmievski
+ * @author Monte Ohrt <monte at ohrt dot com>
+ * @author Rodney Rehm
+ * @param array                    $params   parameters
+ * @param Smarty_Internal_Template $template template object
+ * @return string
+ */
+function smarty_function_html_select_date($params, $template)
+{
+    // generate timestamps used for month names only
+    static $_month_timestamps = null;
+    static $_current_year = null;
+    if ($_month_timestamps === null) {
+        $_current_year = date('Y');
+        $_month_timestamps = array();
+        for ($i = 1; $i <= 12; $i++) {
+            $_month_timestamps[$i] = mktime(0, 0, 0, $i, 1, 2000);
+        }
+    }
+
+    /* Default values. */
+    $prefix = "Date_";
+    $start_year = null;
+    $end_year = null;
+    $display_days = true;
+    $display_months = true;
+    $display_years = true;
+    $month_format = "%B";
+    /* Write months as numbers by default  GL */
+    $month_value_format = "%m";
+    $day_format = "%02d";
+    /* Write day values using this format MB */
+    $day_value_format = "%d";
+    $year_as_text = false;
+    /* Display years in reverse order? Ie. 2000,1999,.... */
+    $reverse_years = false;
+    /* Should the select boxes be part of an array when returned from PHP?
+       e.g. setting it to "birthday", would create "birthday[Day]",
+       "birthday[Month]" & "birthday[Year]". Can be combined with prefix */
+    $field_array = null;
+    /* <select size>'s of the different <select> tags.
+       If not set, uses default dropdown. */
+    $day_size = null;
+    $month_size = null;
+    $year_size = null;
+    /* Unparsed attributes common to *ALL* the <select>/<input> tags.
+       An example might be in the template: all_extra ='class ="foo"'. */
+    $all_extra = null;
+    /* Separate attributes for the tags. */
+    $day_extra = null;
+    $month_extra = null;
+    $year_extra = null;
+    /* Order in which to display the fields.
+       "D" -> day, "M" -> month, "Y" -> year. */
+    $field_order = 'MDY';
+    /* String printed between the different fields. */
+    $field_separator = "\n";
+    $option_separator = "\n";
+    $time = null;
+    // $all_empty = null;
+    // $day_empty = null;
+    // $month_empty = null;
+    // $year_empty = null;
+    $extra_attrs = '';
+    $all_id = null;
+    $day_id = null;
+    $month_id = null;
+    $year_id = null;
+
+    foreach ($params as $_key => $_value) {
+        switch ($_key) {
+            case 'time':
+                if (!is_array($_value) && $_value !== null) {
+                    $time = smarty_make_timestamp($_value);
+                }
+                break;
+
+            case 'month_names':
+                if (is_array($_value) && count($_value) == 12) {
+                    $$_key = $_value;
+                } else {
+                    trigger_error("html_select_date: month_names must be an array of 12 strings", E_USER_NOTICE);
+                }
+                break;
+
+            case 'prefix':
+            case 'field_array':
+            case 'start_year':
+            case 'end_year':
+            case 'day_format':
+            case 'day_value_format':
+            case 'month_format':
+            case 'month_value_format':
+            case 'day_size':
+            case 'month_size':
+            case 'year_size':
+            case 'all_extra':
+            case 'day_extra':
+            case 'month_extra':
+            case 'year_extra':
+            case 'field_order':
+            case 'field_separator':
+            case 'option_separator':
+            case 'all_empty':
+            case 'month_empty':
+            case 'day_empty':
+            case 'year_empty':
+            case 'all_id':
+            case 'month_id':
+            case 'day_id':
+            case 'year_id':
+                $$_key = (string) $_value;
+                break;
+
+            case 'display_days':
+            case 'display_months':
+            case 'display_years':
+            case 'year_as_text':
+            case 'reverse_years':
+                $$_key = (bool) $_value;
+                break;
+
+            default:
+                if (!is_array($_value)) {
+                    $extra_attrs .= ' ' . $_key . '="' . smarty_function_escape_special_chars($_value) . '"';
+                } else {
+                    trigger_error("html_select_date: extra attribute '$_key' cannot be an array", E_USER_NOTICE);
+                }
+                break;
+        }
+    }
+
+    // Note: date() is faster than strftime()
+    // Note: explode(date()) is faster than date() date() date()
+    if (isset($params['time']) && is_array($params['time'])) {
+        if (isset($params['time'][$prefix . 'Year'])) {
+            // $_REQUEST[$field_array] given
+            foreach (array('Y' => 'Year',  'm' => 'Month', 'd' => 'Day') as $_elementKey => $_elementName) {
+                $_variableName = '_' . strtolower($_elementName);
+                $$_variableName = isset($params['time'][$prefix . $_elementName])
+                    ? $params['time'][$prefix . $_elementName]
+                    : date($_elementKey);
+            }
+            $time = mktime(0, 0, 0, $_month, $_day, $_year);
+        } elseif (isset($params['time'][$field_array][$prefix . 'Year'])) {
+            // $_REQUEST given
+            foreach (array('Y' => 'Year',  'm' => 'Month', 'd' => 'Day') as $_elementKey => $_elementName) {
+                $_variableName = '_' . strtolower($_elementName);
+                $$_variableName = isset($params['time'][$field_array][$prefix . $_elementName])
+                    ? $params['time'][$field_array][$prefix . $_elementName]
+                    : date($_elementKey);
+            }
+            $time = mktime(0, 0, 0, $_month, $_day, $_year);
+        } else {
+            // no date found, use NOW
+            list($_year, $_month, $_day) = $time = explode('-', date('Y-m-d'));
+        }
+    } elseif ($time === null) {
+        if (array_key_exists('time', $params)) {
+            $_year = $_month = $_day = $time = null;
+        } else {
+            list($_year, $_month, $_day) = $time = explode('-', date('Y-m-d'));
+        }
+    } else {
+        list($_year, $_month, $_day) = $time = explode('-', date('Y-m-d', $time));
+    }
+
+    // make syntax "+N" or "-N" work with $start_year and $end_year
+    // Note preg_match('!^(\+|\-)\s*(\d+)$!', $end_year, $match) is slower than trim+substr
+    foreach (array('start', 'end') as $key) {
+        $key .= '_year';
+        $t = $$key;
+        if ($t === null) {
+            $$key = (int) $_current_year;
+        } elseif ($t[0] == '+') {
+            $$key = (int) ($_current_year + trim(substr($t, 1)));
+        } elseif ($t[0] == '-') {
+            $$key = (int) ($_current_year - trim(substr($t, 1)));
+        } else {
+            $$key = (int) $$key;
+        }
+    }
+
+    // flip for ascending or descending
+    if (($start_year > $end_year && !$reverse_years) || ($start_year < $end_year && $reverse_years)) {
+        $t = $end_year;
+        $end_year = $start_year;
+        $start_year = $t;
+    }
+
+    // generate year <select> or <input>
+    if ($display_years) {
+        $_html_years = '';
+        $_extra = '';
+        $_name = $field_array ? ($field_array . '[' . $prefix . 'Year]') : ($prefix . 'Year');
+        if ($all_extra) {
+            $_extra .= ' ' . $all_extra;
+        }
+        if ($year_extra) {
+            $_extra .= ' ' . $year_extra;
+        }
+
+        if ($year_as_text) {
+            $_html_years = '<input type="text" name="' . $_name . '" value="' . $_year . '" size="4" maxlength="4"' . $_extra . $extra_attrs . ' />';
+        } else {
+            $_html_years = '<select name="' . $_name . '"';
+            if ($year_id !== null || $all_id !== null) {
+                $_html_years .= ' id="' . smarty_function_escape_special_chars(
+                    $year_id !== null ? ( $year_id ? $year_id : $_name ) : ( $all_id ? ($all_id . $_name) : $_name )
+                ) . '"';
+            }
+            if ($year_size) {
+                $_html_years .= ' size="' . $year_size . '"';
+            }
+            $_html_years .= $_extra . $extra_attrs . '>' . $option_separator;
+
+            if (isset($year_empty) || isset($all_empty)) {
+                $_html_years .= '<option value="">' . ( isset($year_empty) ? $year_empty : $all_empty ) . '</option>' . $option_separator;
+            }
+
+            $op = $start_year > $end_year ? -1 : 1;
+            for ($i=$start_year; $op > 0 ? $i <= $end_year : $i >= $end_year; $i += $op) {
+                $_html_years .= '<option value="' . $i . '"'
+                    . ($_year == $i ? ' selected="selected"' : '')
+                    . '>' . $i . '</option>' . $option_separator;
+            }
+
+            $_html_years .= '</select>';
+        }
+    }
+
+    // generate month <select> or <input>
+    if ($display_months) {
+        $_html_month = '';
+        $_extra = '';
+        $_name = $field_array ? ($field_array . '[' . $prefix . 'Month]') : ($prefix . 'Month');
+        if ($all_extra) {
+            $_extra .= ' ' . $all_extra;
+        }
+        if ($month_extra) {
+            $_extra .= ' ' . $month_extra;
+        }
+
+        $_html_months = '<select name="' . $_name . '"';
+        if ($month_id !== null || $all_id !== null) {
+            $_html_months .= ' id="' . smarty_function_escape_special_chars(
+                $month_id !== null ? ( $month_id ? $month_id : $_name ) : ( $all_id ? ($all_id . $_name) : $_name )
+            ) . '"';
+        }
+        if ($month_size) {
+            $_html_months .= ' size="' . $month_size . '"';
+        }
+        $_html_months .= $_extra . $extra_attrs . '>' . $option_separator;
+
+        if (isset($month_empty) || isset($all_empty)) {
+            $_html_months .= '<option value="">' . ( isset($month_empty) ? $month_empty : $all_empty ) . '</option>' . $option_separator;
+        }
+
+        for ($i = 1; $i <= 12; $i++) {
+            $_val = sprintf('%02d', $i);
+            $_text = isset($month_names) ? smarty_function_escape_special_chars($month_names[$i]) : ($month_format == "%m" ? $_val : strftime($month_format, $_month_timestamps[$i]));
+            $_value = $month_value_format == "%m" ? $_val : strftime($month_value_format, $_month_timestamps[$i]);
+            $_html_months .= '<option value="' . $_value . '"'
+                . ($_val == $_month ? ' selected="selected"' : '')
+                . '>' . $_text . '</option>' . $option_separator;
+        }
+
+        $_html_months .= '</select>';
+    }
+
+    // generate day <select> or <input>
+    if ($display_days) {
+        $_html_day = '';
+        $_extra = '';
+        $_name = $field_array ? ($field_array . '[' . $prefix . 'Day]') : ($prefix . 'Day');
+        if ($all_extra) {
+            $_extra .= ' ' . $all_extra;
+        }
+        if ($day_extra) {
+            $_extra .= ' ' . $day_extra;
+        }
+
+        $_html_days = '<select name="' . $_name . '"';
+        if ($day_id !== null || $all_id !== null) {
+            $_html_days .= ' id="' . smarty_function_escape_special_chars(
+                $day_id !== null ? ( $day_id ? $day_id : $_name ) : ( $all_id ? ($all_id . $_name) : $_name )
+            ) . '"';
+        }
+        if ($day_size) {
+            $_html_days .= ' size="' . $day_size . '"';
+        }
+        $_html_days .= $_extra . $extra_attrs . '>' . $option_separator;
+
+        if (isset($day_empty) || isset($all_empty)) {
+            $_html_days .= '<option value="">' . ( isset($day_empty) ? $day_empty : $all_empty ) . '</option>' . $option_separator;
+        }
+
+        for ($i = 1; $i <= 31; $i++) {
+            $_val = sprintf('%02d', $i);
+            $_text = $day_format == '%02d' ? $_val : sprintf($day_format, $i);
+            $_value = $day_value_format ==  '%02d' ? $_val : sprintf($day_value_format, $i);
+            $_html_days .= '<option value="' . $_value . '"'
+                . ($_val == $_day ? ' selected="selected"' : '')
+                . '>' . $_text . '</option>' . $option_separator;
+        }
+
+        $_html_days .= '</select>';
+    }
+
+    // order the fields for output
+    $_html = '';
+    for ($i=0; $i <= 2; $i++) {
+        switch ($field_order[$i]) {
+            case 'Y':
+            case 'y':
+                if (isset($_html_years)) {
+                    if ($_html) {
+                        $_html .= $field_separator;
+                    }
+                    $_html .= $_html_years;
+                }
+            break;
+
+            case 'm':
+            case 'M':
+                if (isset($_html_months)) {
+                    if ($_html) {
+                        $_html .= $field_separator;
+                    }
+                    $_html .= $_html_months;
+                }
+            break;
+
+            case 'd':
+            case 'D':
+                if (isset($_html_days)) {
+                    if ($_html) {
+                        $_html .= $field_separator;
+                    }
+                    $_html .= $_html_days;
+                }
+            break;
+        }
+    }
+
+    return $_html;
+}

resources/templates/engine/smarty/plugins/function.html_select_time.php

@@ -0,0 +1,364 @@
+<?php
+/**
+ * Smarty plugin
+ *
+ * @package Smarty
+ * @subpackage PluginsFunction
+ */
+
+/**
+ * @ignore
+ */
+require_once(SMARTY_PLUGINS_DIR . 'shared.escape_special_chars.php');
+/**
+ * @ignore
+ */
+require_once(SMARTY_PLUGINS_DIR . 'shared.make_timestamp.php');
+
+/**
+ * Smarty {html_select_time} function plugin
+ *
+ * Type:     function<br>
+ * Name:     html_select_time<br>
+ * Purpose:  Prints the dropdowns for time selection
+ *
+ * @link http://www.smarty.net/manual/en/language.function.html.select.time.php {html_select_time}
+ *          (Smarty online manual)
+ * @author Roberto Berto <[email protected]>
+ * @author Monte Ohrt <monte AT ohrt DOT com>
+ * @param array                    $params   parameters
+ * @param Smarty_Internal_Template $template template object
+ * @return string
+ * @uses smarty_make_timestamp()
+ */
+function smarty_function_html_select_time($params, $template)
+{
+    $prefix = "Time_";
+    $field_array = null;
+    $field_separator = "\n";
+    $option_separator = "\n";
+    $time = null;
+
+    $display_hours = true;
+    $display_minutes = true;
+    $display_seconds = true;
+    $display_meridian = true;
+
+    $hour_format = '%02d';
+    $hour_value_format = '%02d';
+    $minute_format = '%02d';
+    $minute_value_format = '%02d';
+    $second_format = '%02d';
+    $second_value_format = '%02d';
+
+    $hour_size = null;
+    $minute_size = null;
+    $second_size = null;
+    $meridian_size = null;
+
+    $all_empty = null;
+    $hour_empty = null;
+    $minute_empty = null;
+    $second_empty = null;
+    $meridian_empty = null;
+
+    $all_id = null;
+    $hour_id = null;
+    $minute_id = null;
+    $second_id = null;
+    $meridian_id = null;
+
+    $use_24_hours = true;
+    $minute_interval = 1;
+    $second_interval = 1;
+
+    $extra_attrs = '';
+    $all_extra = null;
+    $hour_extra = null;
+    $minute_extra = null;
+    $second_extra = null;
+    $meridian_extra = null;
+
+    foreach ($params as $_key => $_value) {
+        switch ($_key) {
+            case 'time':
+                if (!is_array($_value) && $_value !== null) {
+                    $time = smarty_make_timestamp($_value);
+                }
+                break;
+
+            case 'prefix':
+            case 'field_array':
+
+            case 'field_separator':
+            case 'option_separator':
+
+            case 'all_extra':
+            case 'hour_extra':
+            case 'minute_extra':
+            case 'second_extra':
+            case 'meridian_extra':
+
+            case 'all_empty':
+            case 'hour_empty':
+            case 'minute_empty':
+            case 'second_empty':
+            case 'meridian_empty':
+
+            case 'all_id':
+            case 'hour_id':
+            case 'minute_id':
+            case 'second_id':
+            case 'meridian_id':
+
+            case 'hour_format':
+            case 'hour_value_format':
+            case 'minute_format':
+            case 'minute_value_format':
+            case 'second_format':
+            case 'second_value_format':
+                $$_key = (string) $_value;
+                break;
+
+            case 'display_hours':
+            case 'display_minutes':
+            case 'display_seconds':
+            case 'display_meridian':
+            case 'use_24_hours':
+                $$_key = (bool) $_value;
+                break;
+
+            case 'minute_interval':
+            case 'second_interval':
+
+            case 'hour_size':
+            case 'minute_size':
+            case 'second_size':
+            case 'meridian_size':
+                $$_key = (int) $_value;
+                break;
+
+            default:
+                if (!is_array($_value)) {
+                    $extra_attrs .= ' ' . $_key . '="' . smarty_function_escape_special_chars($_value) . '"';
+                } else {
+                    trigger_error("html_select_date: extra attribute '$_key' cannot be an array", E_USER_NOTICE);
+                }
+                break;
+        }
+    }
+
+    if (isset($params['time']) && is_array($params['time'])) {
+        if (isset($params['time'][$prefix . 'Hour'])) {
+            // $_REQUEST[$field_array] given
+            foreach (array('H' => 'Hour',  'i' => 'Minute', 's' => 'Second') as $_elementKey => $_elementName) {
+                $_variableName = '_' . strtolower($_elementName);
+                $$_variableName = isset($params['time'][$prefix . $_elementName])
+                    ? $params['time'][$prefix . $_elementName]
+                    : date($_elementKey);
+            }
+            $_meridian = isset($params['time'][$prefix . 'Meridian'])
+                ? (' ' . $params['time'][$prefix . 'Meridian'])
+                : '';
+            $time = strtotime( $_hour . ':' . $_minute . ':' . $_second . $_meridian );
+            list($_hour, $_minute, $_second) = $time = explode('-', date('H-i-s', $time));
+        } elseif (isset($params['time'][$field_array][$prefix . 'Hour'])) {
+            // $_REQUEST given
+            foreach (array('H' => 'Hour',  'i' => 'Minute', 's' => 'Second') as $_elementKey => $_elementName) {
+                $_variableName = '_' . strtolower($_elementName);
+                $$_variableName = isset($params['time'][$field_array][$prefix . $_elementName])
+                    ? $params['time'][$field_array][$prefix . $_elementName]
+                    : date($_elementKey);
+            }
+            $_meridian = isset($params['time'][$field_array][$prefix . 'Meridian'])
+                ? (' ' . $params['time'][$field_array][$prefix . 'Meridian'])
+                : '';
+            $time = strtotime( $_hour . ':' . $_minute . ':' . $_second . $_meridian );
+            list($_hour, $_minute, $_second) = $time = explode('-', date('H-i-s', $time));
+        } else {
+            // no date found, use NOW
+            list($_year, $_month, $_day) = $time = explode('-', date('Y-m-d'));
+        }
+    } elseif ($time === null) {
+        if (array_key_exists('time', $params)) {
+            $_hour = $_minute = $_second = $time = null;
+        } else {
+            list($_hour, $_minute, $_second) = $time = explode('-', date('H-i-s'));
+        }
+    } else {
+        list($_hour, $_minute, $_second) = $time = explode('-', date('H-i-s', $time));
+    }
+
+    // generate hour <select>
+    if ($display_hours) {
+        $_html_hours = '';
+        $_extra = '';
+        $_name = $field_array ? ($field_array . '[' . $prefix . 'Hour]') : ($prefix . 'Hour');
+        if ($all_extra) {
+            $_extra .= ' ' . $all_extra;
+        }
+        if ($hour_extra) {
+            $_extra .= ' ' . $hour_extra;
+        }
+
+        $_html_hours = '<select name="' . $_name . '"';
+        if ($hour_id !== null || $all_id !== null) {
+            $_html_hours .= ' id="' . smarty_function_escape_special_chars(
+                $hour_id !== null ? ( $hour_id ? $hour_id : $_name ) : ( $all_id ? ($all_id . $_name) : $_name )
+            ) . '"';
+        }
+        if ($hour_size) {
+            $_html_hours .= ' size="' . $hour_size . '"';
+        }
+        $_html_hours .= $_extra . $extra_attrs . '>' . $option_separator;
+
+        if (isset($hour_empty) || isset($all_empty)) {
+            $_html_hours .= '<option value="">' . ( isset($hour_empty) ? $hour_empty : $all_empty ) . '</option>' . $option_separator;
+        }
+
+        $start = $use_24_hours ? 0 : 1;
+        $end = $use_24_hours ? 23 : 12;
+        for ($i=$start; $i <= $end; $i++) {
+            $_val = sprintf('%02d', $i);
+            $_text = $hour_format == '%02d' ? $_val : sprintf($hour_format, $i);
+            $_value = $hour_value_format == '%02d' ? $_val : sprintf($hour_value_format, $i);
+
+            if (!$use_24_hours) {
+                $_hour12 = $_hour == 0
+                    ? 12
+                    : ($_hour <= 12 ? $_hour : $_hour -12);
+            }
+
+            $selected = $_hour !== null ? ($use_24_hours ? $_hour == $_val : $_hour12 == $_val) : null;
+            $_html_hours .= '<option value="' . $_value . '"'
+                . ($selected ? ' selected="selected"' : '')
+                . '>' . $_text . '</option>' . $option_separator;
+        }
+
+        $_html_hours .= '</select>';
+    }
+
+    // generate minute <select>
+    if ($display_minutes) {
+        $_html_minutes = '';
+        $_extra = '';
+        $_name = $field_array ? ($field_array . '[' . $prefix . 'Minute]') : ($prefix . 'Minute');
+        if ($all_extra) {
+            $_extra .= ' ' . $all_extra;
+        }
+        if ($minute_extra) {
+            $_extra .= ' ' . $minute_extra;
+        }
+
+        $_html_minutes = '<select name="' . $_name . '"';
+        if ($minute_id !== null || $all_id !== null) {
+            $_html_minutes .= ' id="' . smarty_function_escape_special_chars(
+                $minute_id !== null ? ( $minute_id ? $minute_id : $_name ) : ( $all_id ? ($all_id . $_name) : $_name )
+            ) . '"';
+        }
+        if ($minute_size) {
+            $_html_minutes .= ' size="' . $minute_size . '"';
+        }
+        $_html_minutes .= $_extra . $extra_attrs . '>' . $option_separator;
+
+        if (isset($minute_empty) || isset($all_empty)) {
+            $_html_minutes .= '<option value="">' . ( isset($minute_empty) ? $minute_empty : $all_empty ) . '</option>' . $option_separator;
+        }
+
+        $selected = $_minute !== null ? ($_minute - $_minute % $minute_interval) : null;
+        for ($i=0; $i <= 59; $i += $minute_interval) {
+            $_val = sprintf('%02d', $i);
+            $_text = $minute_format == '%02d' ? $_val : sprintf($minute_format, $i);
+            $_value = $minute_value_format == '%02d' ? $_val : sprintf($minute_value_format, $i);
+            $_html_minutes .= '<option value="' . $_value . '"'
+                . ($selected === $i ? ' selected="selected"' : '')
+                . '>' . $_text . '</option>' . $option_separator;
+        }
+
+        $_html_minutes .= '</select>';
+    }
+
+    // generate second <select>
+    if ($display_seconds) {
+        $_html_seconds = '';
+        $_extra = '';
+        $_name = $field_array ? ($field_array . '[' . $prefix . 'Second]') : ($prefix . 'Second');
+        if ($all_extra) {
+            $_extra .= ' ' . $all_extra;
+        }
+        if ($second_extra) {
+            $_extra .= ' ' . $second_extra;
+        }
+
+        $_html_seconds = '<select name="' . $_name . '"';
+        if ($second_id !== null || $all_id !== null) {
+            $_html_seconds .= ' id="' . smarty_function_escape_special_chars(
+                $second_id !== null ? ( $second_id ? $second_id : $_name ) : ( $all_id ? ($all_id . $_name) : $_name )
+            ) . '"';
+        }
+        if ($second_size) {
+            $_html_seconds .= ' size="' . $second_size . '"';
+        }
+        $_html_seconds .= $_extra . $extra_attrs . '>' . $option_separator;
+
+        if (isset($second_empty) || isset($all_empty)) {
+            $_html_seconds .= '<option value="">' . ( isset($second_empty) ? $second_empty : $all_empty ) . '</option>' . $option_separator;
+        }
+
+        $selected = $_second !== null ? ($_second - $_second % $second_interval) : null;
+        for ($i=0; $i <= 59; $i += $second_interval) {
+            $_val = sprintf('%02d', $i);
+            $_text = $second_format == '%02d' ? $_val : sprintf($second_format, $i);
+            $_value = $second_value_format == '%02d' ? $_val : sprintf($second_value_format, $i);
+            $_html_seconds .= '<option value="' . $_value . '"'
+                . ($selected === $i ? ' selected="selected"' : '')
+                . '>' . $_text . '</option>' . $option_separator;
+        }
+
+        $_html_seconds .= '</select>';
+    }
+
+    // generate meridian <select>
+    if ($display_meridian && !$use_24_hours) {
+        $_html_meridian = '';
+        $_extra = '';
+        $_name = $field_array ? ($field_array . '[' . $prefix . 'Meridian]') : ($prefix . 'Meridian');
+        if ($all_extra) {
+            $_extra .= ' ' . $all_extra;
+        }
+        if ($meridian_extra) {
+            $_extra .= ' ' . $meridian_extra;
+        }
+
+        $_html_meridian = '<select name="' . $_name . '"';
+        if ($meridian_id !== null || $all_id !== null) {
+            $_html_meridian .= ' id="' . smarty_function_escape_special_chars(
+                $meridian_id !== null ? ( $meridian_id ? $meridian_id : $_name ) : ( $all_id ? ($all_id . $_name) : $_name )
+            ) . '"';
+        }
+        if ($meridian_size) {
+            $_html_meridian .= ' size="' . $meridian_size . '"';
+        }
+        $_html_meridian .= $_extra . $extra_attrs . '>' . $option_separator;
+
+        if (isset($meridian_empty) || isset($all_empty)) {
+            $_html_meridian .= '<option value="">' . ( isset($meridian_empty) ? $meridian_empty : $all_empty ) . '</option>' . $option_separator;
+        }
+
+        $_html_meridian .= '<option value="am"'. ($_hour > 0 && $_hour < 12 ? ' selected="selected"' : '') .'>AM</option>' . $option_separator
+            . '<option value="pm"'. ($_hour < 12 ? '' : ' selected="selected"') .'>PM</option>' . $option_separator
+            . '</select>';
+    }
+
+    $_html = '';
+    foreach (array('_html_hours', '_html_minutes', '_html_seconds', '_html_meridian') as $k) {
+        if (isset($$k)) {
+            if ($_html) {
+                $_html .= $field_separator;
+            }
+            $_html .= $$k;
+        }
+    }
+
+    return $_html;
+}

resources/templates/engine/smarty/plugins/function.html_table.php

@@ -0,0 +1,176 @@
+<?php
+/**
+ * Smarty plugin
+ *
+ * @package Smarty
+ * @subpackage PluginsFunction
+ */
+
+/**
+ * Smarty {html_table} function plugin
+ *
+ * Type:     function<br>
+ * Name:     html_table<br>
+ * Date:     Feb 17, 2003<br>
+ * Purpose:  make an html table from an array of data<br>
+ * Params:
+ * <pre>
+ * - loop       - array to loop through
+ * - cols       - number of columns, comma separated list of column names
+ *                or array of column names
+ * - rows       - number of rows
+ * - table_attr - table attributes
+ * - th_attr    - table heading attributes (arrays are cycled)
+ * - tr_attr    - table row attributes (arrays are cycled)
+ * - td_attr    - table cell attributes (arrays are cycled)
+ * - trailpad   - value to pad trailing cells with
+ * - caption    - text for caption element
+ * - vdir       - vertical direction (default: "down", means top-to-bottom)
+ * - hdir       - horizontal direction (default: "right", means left-to-right)
+ * - inner      - inner loop (default "cols": print $loop line by line,
+ *                $loop will be printed column by column otherwise)
+ * </pre>
+ * Examples:
+ * <pre>
+ * {table loop=$data}
+ * {table loop=$data cols=4 tr_attr='"bgcolor=red"'}
+ * {table loop=$data cols="first,second,third" tr_attr=$colors}
+ * </pre>
+ *
+ * @author Monte Ohrt <monte at ohrt dot com>
+ * @author credit to Messju Mohr <messju at lammfellpuschen dot de>
+ * @author credit to boots <boots dot smarty at yahoo dot com>
+ * @version 1.1
+ * @link http://www.smarty.net/manual/en/language.function.html.table.php {html_table}
+ *          (Smarty online manual)
+ * @param array                    $params   parameters
+ * @param Smarty_Internal_Template $template template object
+ * @return string
+ */
+function smarty_function_html_table($params, $template)
+{
+    $table_attr = 'border="1"';
+    $tr_attr = '';
+    $th_attr = '';
+    $td_attr = '';
+    $cols = $cols_count = 3;
+    $rows = 3;
+    $trailpad = '&nbsp;';
+    $vdir = 'down';
+    $hdir = 'right';
+    $inner = 'cols';
+    $caption = '';
+    $loop = null;
+
+    if (!isset($params['loop'])) {
+        trigger_error("html_table: missing 'loop' parameter",E_USER_WARNING);
+
+        return;
+    }
+
+    foreach ($params as $_key => $_value) {
+        switch ($_key) {
+            case 'loop':
+                $$_key = (array) $_value;
+                break;
+
+            case 'cols':
+                if (is_array($_value) && !empty($_value)) {
+                    $cols = $_value;
+                    $cols_count = count($_value);
+                } elseif (!is_numeric($_value) && is_string($_value) && !empty($_value)) {
+                    $cols = explode(',', $_value);
+                    $cols_count = count($cols);
+                } elseif (!empty($_value)) {
+                    $cols_count = (int) $_value;
+                } else {
+                    $cols_count = $cols;
+                }
+                break;
+
+            case 'rows':
+                $$_key = (int) $_value;
+                break;
+
+            case 'table_attr':
+            case 'trailpad':
+            case 'hdir':
+            case 'vdir':
+            case 'inner':
+            case 'caption':
+                $$_key = (string) $_value;
+                break;
+
+            case 'tr_attr':
+            case 'td_attr':
+            case 'th_attr':
+                $$_key = $_value;
+                break;
+        }
+    }
+
+    $loop_count = count($loop);
+    if (empty($params['rows'])) {
+        /* no rows specified */
+        $rows = ceil($loop_count / $cols_count);
+    } elseif (empty($params['cols'])) {
+        if (!empty($params['rows'])) {
+            /* no cols specified, but rows */
+            $cols_count = ceil($loop_count / $rows);
+        }
+    }
+
+    $output = "<table $table_attr>\n";
+
+    if (!empty($caption)) {
+        $output .= '<caption>' . $caption . "</caption>\n";
+    }
+
+    if (is_array($cols)) {
+        $cols = ($hdir == 'right') ? $cols : array_reverse($cols);
+        $output .= "<thead><tr>\n";
+
+        for ($r = 0; $r < $cols_count; $r++) {
+            $output .= '<th' . smarty_function_html_table_cycle('th', $th_attr, $r) . '>';
+            $output .= $cols[$r];
+            $output .= "</th>\n";
+        }
+        $output .= "</tr></thead>\n";
+    }
+
+    $output .= "<tbody>\n";
+    for ($r = 0; $r < $rows; $r++) {
+        $output .= "<tr" . smarty_function_html_table_cycle('tr', $tr_attr, $r) . ">\n";
+        $rx = ($vdir == 'down') ? $r * $cols_count : ($rows-1 - $r) * $cols_count;
+
+        for ($c = 0; $c < $cols_count; $c++) {
+            $x = ($hdir == 'right') ? $rx + $c : $rx + $cols_count-1 - $c;
+            if ($inner != 'cols') {
+                /* shuffle x to loop over rows*/
+                $x = floor($x / $cols_count) + ($x % $cols_count) * $rows;
+            }
+
+            if ($x < $loop_count) {
+                $output .= "<td" . smarty_function_html_table_cycle('td', $td_attr, $c) . ">" . $loop[$x] . "</td>\n";
+            } else {
+                $output .= "<td" . smarty_function_html_table_cycle('td', $td_attr, $c) . ">$trailpad</td>\n";
+            }
+        }
+        $output .= "</tr>\n";
+    }
+    $output .= "</tbody>\n";
+    $output .= "</table>\n";
+
+    return $output;
+}
+
+function smarty_function_html_table_cycle($name, $var, $no)
+{
+    if (!is_array($var)) {
+        $ret = $var;
+    } else {
+        $ret = $var[$no % count($var)];
+    }
+
+    return ($ret) ? ' ' . $ret : '';
+}

resources/templates/engine/smarty/plugins/function.mailto.php

@@ -0,0 +1,154 @@
+<?php
+/**
+ * Smarty plugin
+ *
+ * @package Smarty
+ * @subpackage PluginsFunction
+ */
+
+/**
+ * Smarty {mailto} function plugin
+ *
+ * Type:     function<br>
+ * Name:     mailto<br>
+ * Date:     May 21, 2002
+ * Purpose:  automate mailto address link creation, and optionally encode them.<br>
+ * Params:
+ * <pre>
+ * - address    - (required) - e-mail address
+ * - text       - (optional) - text to display, default is address
+ * - encode     - (optional) - can be one of:
+ *                             * none : no encoding (default)
+ *                             * javascript : encode with javascript
+ *                             * javascript_charcode : encode with javascript charcode
+ *                             * hex : encode with hexidecimal (no javascript)
+ * - cc         - (optional) - address(es) to carbon copy
+ * - bcc        - (optional) - address(es) to blind carbon copy
+ * - subject    - (optional) - e-mail subject
+ * - newsgroups - (optional) - newsgroup(s) to post to
+ * - followupto - (optional) - address(es) to follow up to
+ * - extra      - (optional) - extra tags for the href link
+ * </pre>
+ * Examples:
+ * <pre>
+ * {mailto address="[email protected]"}
+ * {mailto address="[email protected]" encode="javascript"}
+ * {mailto address="[email protected]" encode="hex"}
+ * {mailto address="[email protected]" subject="Hello to you!"}
+ * {mailto address="[email protected]" cc="[email protected],[email protected]"}
+ * {mailto address="[email protected]" extra='class="mailto"'}
+ * </pre>
+ *
+ * @link http://www.smarty.net/manual/en/language.function.mailto.php {mailto}
+ *          (Smarty online manual)
+ * @version 1.2
+ * @author Monte Ohrt <monte at ohrt dot com>
+ * @author credits to Jason Sweat (added cc, bcc and subject functionality)
+ * @param array                    $params   parameters
+ * @param Smarty_Internal_Template $template template object
+ * @return string
+ */
+function smarty_function_mailto($params, $template)
+{
+    static $_allowed_encoding = array('javascript' => true, 'javascript_charcode' => true, 'hex' => true, 'none' => true);
+    $extra = '';
+
+    if (empty($params['address'])) {
+        trigger_error("mailto: missing 'address' parameter",E_USER_WARNING);
+
+        return;
+    } else {
+        $address = $params['address'];
+    }
+
+    $text = $address;
+    // netscape and mozilla do not decode %40 (@) in BCC field (bug?)
+    // so, don't encode it.
+    $search = array('%40', '%2C');
+    $replace = array('@', ',');
+    $mail_parms = array();
+    foreach ($params as $var => $value) {
+        switch ($var) {
+            case 'cc':
+            case 'bcc':
+            case 'followupto':
+                if (!empty($value))
+                    $mail_parms[] = $var . '=' . str_replace($search, $replace, rawurlencode($value));
+                break;
+
+            case 'subject':
+            case 'newsgroups':
+                $mail_parms[] = $var . '=' . rawurlencode($value);
+                break;
+
+            case 'extra':
+            case 'text':
+                $$var = $value;
+
+            default:
+        }
+    }
+
+    if ($mail_parms) {
+        $address .= '?' . join('&', $mail_parms);
+    }
+
+    $encode = (empty($params['encode'])) ? 'none' : $params['encode'];
+    if (!isset($_allowed_encoding[$encode])) {
+        trigger_error("mailto: 'encode' parameter must be none, javascript, javascript_charcode or hex", E_USER_WARNING);
+
+        return;
+    }
+    // FIXME: (rodneyrehm) document.write() excues me what? 1998 has passed!
+    if ($encode == 'javascript') {
+        $string = 'document.write(\'<a href="mailto:' . $address . '" ' . $extra . '>' . $text . '</a>\');';
+
+        $js_encode = '';
+        for ($x = 0, $_length = strlen($string); $x < $_length; $x++) {
+            $js_encode .= '%' . bin2hex($string[$x]);
+        }
+
+        return '<script type="text/javascript">eval(unescape(\'' . $js_encode . '\'))</script>';
+    } elseif ($encode == 'javascript_charcode') {
+        $string = '<a href="mailto:' . $address . '" ' . $extra . '>' . $text . '</a>';
+
+        for ($x = 0, $y = strlen($string); $x < $y; $x++) {
+            $ord[] = ord($string[$x]);
+        }
+
+        $_ret = "<script type=\"text/javascript\" language=\"javascript\">\n"
+            . "{document.write(String.fromCharCode("
+            . implode(',', $ord)
+            . "))"
+            . "}\n"
+            . "</script>\n";
+
+        return $_ret;
+    } elseif ($encode == 'hex') {
+        preg_match('!^(.*)(\?.*)$!', $address, $match);
+        if (!empty($match[2])) {
+            trigger_error("mailto: hex encoding does not work with extra attributes. Try javascript.",E_USER_WARNING);
+
+            return;
+        }
+        $address_encode = '';
+        for ($x = 0, $_length = strlen($address); $x < $_length; $x++) {
+            if (preg_match('!\w!' . Smarty::$_UTF8_MODIFIER, $address[$x])) {
+                $address_encode .= '%' . bin2hex($address[$x]);
+            } else {
+                $address_encode .= $address[$x];
+            }
+        }
+        $text_encode = '';
+        for ($x = 0, $_length = strlen($text); $x < $_length; $x++) {
+            $text_encode .= '&#x' . bin2hex($text[$x]) . ';';
+        }
+
+        $mailto = "&#109;&#97;&#105;&#108;&#116;&#111;&#58;";
+
+        return '<a href="' . $mailto . $address_encode . '" ' . $extra . '>' . $text_encode . '</a>';
+    } else {
+        // no encoding
+        return '<a href="mailto:' . $address . '" ' . $extra . '>' . $text . '</a>';
+    }
+}

resources/templates/engine/smarty/plugins/function.math.php

@@ -0,0 +1,90 @@
+<?php
+/**
+ * Smarty plugin
+ *
+ * This plugin is only for Smarty2 BC
+ * @package Smarty
+ * @subpackage PluginsFunction
+ */
+
+/**
+ * Smarty {math} function plugin
+ *
+ * Type:     function<br>
+ * Name:     math<br>
+ * Purpose:  handle math computations in template
+ *
+ * @link http://www.smarty.net/manual/en/language.function.math.php {math}
+ *          (Smarty online manual)
+ * @author   Monte Ohrt <monte at ohrt dot com>
+ * @param array                    $params   parameters
+ * @param Smarty_Internal_Template $template template object
+ * @return string|null
+ */
+function smarty_function_math($params, $template)
+{
+    static $_allowed_funcs = array(
+        'int' => true, 'abs' => true, 'ceil' => true, 'cos' => true, 'exp' => true, 'floor' => true,
+        'log' => true, 'log10' => true, 'max' => true, 'min' => true, 'pi' => true, 'pow' => true,
+        'rand' => true, 'round' => true, 'sin' => true, 'sqrt' => true, 'srand' => true ,'tan' => true
+    );
+    // be sure equation parameter is present
+    if (empty($params['equation'])) {
+        trigger_error("math: missing equation parameter",E_USER_WARNING);
+
+        return;
+    }
+
+    $equation = $params['equation'];
+
+    // make sure parenthesis are balanced
+    if (substr_count($equation,"(") != substr_count($equation,")")) {
+        trigger_error("math: unbalanced parenthesis",E_USER_WARNING);
+
+        return;
+    }
+
+    // match all vars in equation, make sure all are passed
+    preg_match_all("!(?:0x[a-fA-F0-9]+)|([a-zA-Z][a-zA-Z0-9_]*)!",$equation, $match);
+
+    foreach ($match[1] as $curr_var) {
+        if ($curr_var && !isset($params[$curr_var]) && !isset($_allowed_funcs[$curr_var])) {
+            trigger_error("math: function call $curr_var not allowed",E_USER_WARNING);
+
+            return;
+        }
+    }
+
+    foreach ($params as $key => $val) {
+        if ($key != "equation" && $key != "format" && $key != "assign") {
+            // make sure value is not empty
+            if (strlen($val)==0) {
+                trigger_error("math: parameter $key is empty",E_USER_WARNING);
+
+                return;
+            }
+            if (!is_numeric($val)) {
+                trigger_error("math: parameter $key: is not numeric",E_USER_WARNING);
+
+                return;
+            }
+            $equation = preg_replace("/\b$key\b/", " \$params['$key'] ", $equation);
+        }
+    }
+    $smarty_math_result = null;
+    eval("\$smarty_math_result = ".$equation.";");
+
+    if (empty($params['format'])) {
+        if (empty($params['assign'])) {
+            return $smarty_math_result;
+        } else {
+            $template->assign($params['assign'],$smarty_math_result);
+        }
+    } else {
+        if (empty($params['assign'])) {
+            printf($params['format'],$smarty_math_result);
+        } else {
+            $template->assign($params['assign'],sprintf($params['format'],$smarty_math_result));
+        }
+    }
+}

resources/templates/engine/smarty/plugins/modifier.capitalize.php

@@ -0,0 +1,65 @@
+<?php
+/**
+ * Smarty plugin
+ *
+ * @package Smarty
+ * @subpackage PluginsModifier
+ */
+
+/**
+ * Smarty capitalize modifier plugin
+ *
+ * Type:     modifier<br>
+ * Name:     capitalize<br>
+ * Purpose:  capitalize words in the string
+ *
+ * {@internal {$string|capitalize:true:true} is the fastest option for MBString enabled systems }}
+ *
+ * @param string  $string    string to capitalize
+ * @param boolean $uc_digits also capitalize "x123" to "X123"
+ * @param boolean $lc_rest   capitalize first letters, lowercase all following letters "aAa" to "Aaa"
+ * @return string capitalized string
+ * @author Monte Ohrt <monte at ohrt dot com>
+ * @author Rodney Rehm
+ */
+function smarty_modifier_capitalize($string, $uc_digits = false, $lc_rest = false)
+{
+    if (Smarty::$_MBSTRING) {
+        if ($lc_rest) {
+            // uppercase (including hyphenated words)
+            $upper_string = mb_convert_case( $string, MB_CASE_TITLE, Smarty::$_CHARSET );
+        } else {
+            // uppercase word breaks
+            $upper_string = preg_replace_callback("!(^|[^\p{L}'])([\p{Ll}])!S" . Smarty::$_UTF8_MODIFIER, create_function ('$matches', 'return stripslashes($matches[1]).mb_convert_case(stripslashes($matches[2]),MB_CASE_UPPER, "' . addslashes(Smarty::$_CHARSET) . '");'), $string);
+        }
+        // check uc_digits case
+        if (!$uc_digits) {
+            if (preg_match_all("!\b([\p{L}]*[\p{N}]+[\p{L}]*)\b!" . Smarty::$_UTF8_MODIFIER, $string, $matches, PREG_OFFSET_CAPTURE)) {
+                foreach ($matches[1] as $match) {
+                    $upper_string = substr_replace($upper_string, mb_strtolower($match[0], Smarty::$_CHARSET), $match[1], strlen($match[0]));
+                }
+            }
+        }
+        $upper_string = preg_replace_callback("!((^|\s)['\"])(\w)!" . Smarty::$_UTF8_MODIFIER, create_function ('$matches', 'return stripslashes($matches[1]).mb_convert_case(stripslashes($matches[3]),MB_CASE_UPPER, "' . addslashes(Smarty::$_CHARSET) . '");'), $upper_string);
+
+        return $upper_string;
+    }
+
+    // lowercase first
+    if ($lc_rest) {
+        $string = strtolower($string);
+    }
+    // uppercase (including hyphenated words)
+    $upper_string = preg_replace_callback("!(^|[^\p{L}'])([\p{Ll}])!S" . Smarty::$_UTF8_MODIFIER, create_function ('$matches', 'return stripslashes($matches[1]).ucfirst(stripslashes($matches[2]));'), $string);
+    // check uc_digits case
+    if (!$uc_digits) {
+        if (preg_match_all("!\b([\p{L}]*[\p{N}]+[\p{L}]*)\b!" . Smarty::$_UTF8_MODIFIER, $string, $matches, PREG_OFFSET_CAPTURE)) {
+            foreach ($matches[1] as $match) {
+                $upper_string = substr_replace($upper_string, strtolower($match[0]), $match[1], strlen($match[0]));
+            }
+        }
+    }
+    $upper_string = preg_replace_callback("!((^|\s)['\"])(\w)!" . Smarty::$_UTF8_MODIFIER, create_function ('$matches', 'return stripslashes($matches[1]).ucfirst(stripslashes($matches[3]));'), $upper_string);
+
+    return $upper_string;
+}

resources/templates/engine/smarty/plugins/modifier.date_format.php

@@ -0,0 +1,64 @@
+<?php
+/**
+ * Smarty plugin
+ *
+ * @package Smarty
+ * @subpackage PluginsModifier
+ */
+
+/**
+ * Smarty date_format modifier plugin
+ *
+ * Type:     modifier<br>
+ * Name:     date_format<br>
+ * Purpose:  format datestamps via strftime<br>
+ * Input:<br>
+ *          - string: input date string
+ *          - format: strftime format for output
+ *          - default_date: default date if $string is empty
+ *
+ * @link http://www.smarty.net/manual/en/language.modifier.date.format.php date_format (Smarty online manual)
+ * @author Monte Ohrt <monte at ohrt dot com>
+ * @param string $string       input date string
+ * @param string $format       strftime format for output
+ * @param string $default_date default date if $string is empty
+ * @param string $formatter    either 'strftime' or 'auto'
+ * @return string |void
+ * @uses smarty_make_timestamp()
+ */
+function smarty_modifier_date_format($string, $format=null, $default_date='', $formatter='auto')
+{
+    if ($format === null) {
+        $format = Smarty::$_DATE_FORMAT;
+    }
+    /**
+    * Include the {@link shared.make_timestamp.php} plugin
+    */
+    require_once(SMARTY_PLUGINS_DIR . 'shared.make_timestamp.php');
+    if ($string != '' && $string != '0000-00-00' && $string != '0000-00-00 00:00:00') {
+        $timestamp = smarty_make_timestamp($string);
+    } elseif ($default_date != '') {
+        $timestamp = smarty_make_timestamp($default_date);
+    } else {
+        return;
+    }
+    if ($formatter=='strftime'||($formatter=='auto'&&strpos($format,'%')!==false)) {
+        if (DS == '\\') {
+            $_win_from = array('%D', '%h', '%n', '%r', '%R', '%t', '%T');
+            $_win_to = array('%m/%d/%y', '%b', "\n", '%I:%M:%S %p', '%H:%M', "\t", '%H:%M:%S');
+            if (strpos($format, '%e') !== false) {
+                $_win_from[] = '%e';
+                $_win_to[] = sprintf('%\' 2d', date('j', $timestamp));
+            }
+            if (strpos($format, '%l') !== false) {
+                $_win_from[] = '%l';
+                $_win_to[] = sprintf('%\' 2d', date('h', $timestamp));
+            }
+            $format = str_replace($_win_from, $_win_to, $format);
+        }
+
+        return strftime($format, $timestamp);
+    } else {
+        return date($format, $timestamp);
+    }
+}

resources/templates/engine/smarty/plugins/modifier.debug_print_var.php

@@ -0,0 +1,103 @@
+<?php
+/**
+ * Smarty plugin
+ *
+ * @package Smarty
+ * @subpackage Debug
+ */
+
+/**
+ * Smarty debug_print_var modifier plugin
+ *
+ * Type:     modifier<br>
+ * Name:     debug_print_var<br>
+ * Purpose:  formats variable contents for display in the console
+ *
+ * @author Monte Ohrt <monte at ohrt dot com>
+ * @param array|object $var     variable to be formatted
+ * @param integer      $depth   maximum recursion depth if $var is an array
+ * @param integer      $length  maximum string length if $var is a string
+ * @return string
+ */
+function smarty_modifier_debug_print_var ($var, $depth = 0, $length = 40)
+{
+    $_replace = array("\n" => '<i>\n</i>',
+        "\r" => '<i>\r</i>',
+        "\t" => '<i>\t</i>'
+        );
+
+    switch (gettype($var)) {
+        case 'array' :
+            $results = '<b>Array (' . count($var) . ')</b>';
+            foreach ($var as $curr_key => $curr_val) {
+                $results .= '<br>' . str_repeat('&nbsp;', $depth * 2)
+                 . '<b>' . strtr($curr_key, $_replace) . '</b> =&gt; '
+                 . smarty_modifier_debug_print_var($curr_val, ++$depth, $length);
+                $depth--;
+            }
+            break;
+
+        case 'object' :
+            $object_vars = get_object_vars($var);
+            $results = '<b>' . get_class($var) . ' Object (' . count($object_vars) . ')</b>';
+            foreach ($object_vars as $curr_key => $curr_val) {
+                $results .= '<br>' . str_repeat('&nbsp;', $depth * 2)
+                 . '<b> -&gt;' . strtr($curr_key, $_replace) . '</b> = '
+                 . smarty_modifier_debug_print_var($curr_val, ++$depth, $length);
+                $depth--;
+            }
+            break;
+
+        case 'boolean' :
+        case 'NULL' :
+        case 'resource' :
+            if (true === $var) {
+                $results = 'true';
+            } elseif (false === $var) {
+                $results = 'false';
+            } elseif (null === $var) {
+                $results = 'null';
+            } else {
+                $results = htmlspecialchars((string) $var);
+            }
+            $results = '<i>' . $results . '</i>';
+            break;
+
+        case 'integer' :
+        case 'float' :
+            $results = htmlspecialchars((string) $var);
+            break;
+
+        case 'string' :
+            $results = strtr($var, $_replace);
+            if (Smarty::$_MBSTRING) {
+                if (mb_strlen($var, Smarty::$_CHARSET) > $length) {
+                    $results = mb_substr($var, 0, $length - 3, Smarty::$_CHARSET) . '...';
+                }
+            } else {
+                if (isset($var[$length])) {
+                    $results = substr($var, 0, $length - 3) . '...';
+                }
+            }
+
+            $results = htmlspecialchars('"' . $results . '"');
+            break;
+
+        case 'unknown type' :
+        default :
+            $results = strtr((string) $var, $_replace);
+            if (Smarty::$_MBSTRING) {
+                if (mb_strlen($results, Smarty::$_CHARSET) > $length) {
+                    $results = mb_substr($results, 0, $length - 3, Smarty::$_CHARSET) . '...';
+                }
+            } else {
+                if (strlen($results) > $length) {
+                    $results = substr($results, 0, $length - 3) . '...';
+                }
+            }
+
+            $results = htmlspecialchars($results);
+    }
+
+    return $results;
+}

resources/templates/engine/smarty/plugins/modifier.escape.php

@@ -0,0 +1,197 @@
+<?php
+/**
+ * Smarty plugin
+ *
+ * @package Smarty
+ * @subpackage PluginsModifier
+ */
+
+/**
+ * Smarty escape modifier plugin
+ *
+ * Type:     modifier<br>
+ * Name:     escape<br>
+ * Purpose:  escape string for output
+ *
+ * @link http://www.smarty.net/manual/en/language.modifier.count.characters.php count_characters (Smarty online manual)
+ * @author Monte Ohrt <monte at ohrt dot com>
+ * @param string  $string        input string
+ * @param string  $esc_type      escape type
+ * @param string  $char_set      character set, used for htmlspecialchars() or htmlentities()
+ * @param boolean $double_encode encode already encoded entitites again, used for htmlspecialchars() or htmlentities()
+ * @return string escaped input string
+ */
+function smarty_modifier_escape($string, $esc_type = 'html', $char_set = null, $double_encode = true)
+{
+    static $_double_encode = null;
+    if ($_double_encode === null) {
+        $_double_encode = version_compare(PHP_VERSION, '5.2.3', '>=');
+    }
+
+    if (!$char_set) {
+        $char_set = Smarty::$_CHARSET;
+    }
+
+    switch ($esc_type) {
+        case 'html':
+            if ($_double_encode) {
+                // php >=5.3.2 - go native
+                return htmlspecialchars($string, ENT_QUOTES, $char_set, $double_encode);
+            } else {
+                if ($double_encode) {
+                    // php <5.2.3 - only handle double encoding
+                    return htmlspecialchars($string, ENT_QUOTES, $char_set);
+                } else {
+                    // php <5.2.3 - prevent double encoding
+                    $string = preg_replace('!&(#?\w+);!', '%%%SMARTY_START%%%\\1%%%SMARTY_END%%%', $string);
+                    $string = htmlspecialchars($string, ENT_QUOTES, $char_set);
+                    $string = str_replace(array('%%%SMARTY_START%%%', '%%%SMARTY_END%%%'), array('&', ';'), $string);
+
+                    return $string;
+                }
+            }
+
+        case 'htmlall':
+            if (Smarty::$_MBSTRING) {
+                // mb_convert_encoding ignores htmlspecialchars()
+                if ($_double_encode) {
+                    // php >=5.3.2 - go native
+                    $string = htmlspecialchars($string, ENT_QUOTES, $char_set, $double_encode);
+                } else {
+                    if ($double_encode) {
+                        // php <5.2.3 - only handle double encoding
+                        $string = htmlspecialchars($string, ENT_QUOTES, $char_set);
+                    } else {
+                        // php <5.2.3 - prevent double encoding
+                        $string = preg_replace('!&(#?\w+);!', '%%%SMARTY_START%%%\\1%%%SMARTY_END%%%', $string);
+                        $string = htmlspecialchars($string, ENT_QUOTES, $char_set);
+                        $string = str_replace(array('%%%SMARTY_START%%%', '%%%SMARTY_END%%%'), array('&', ';'), $string);
+
+                        return $string;
+                    }
+                }
+
+                // htmlentities() won't convert everything, so use mb_convert_encoding
+                return mb_convert_encoding($string, 'HTML-ENTITIES', $char_set);
+            }
+
+            // no MBString fallback
+            if ($_double_encode) {
+                return htmlentities($string, ENT_QUOTES, $char_set, $double_encode);
+            } else {
+                if ($double_encode) {
+                    return htmlentities($string, ENT_QUOTES, $char_set);
+                } else {
+                    $string = preg_replace('!&(#?\w+);!', '%%%SMARTY_START%%%\\1%%%SMARTY_END%%%', $string);
+                    $string = htmlentities($string, ENT_QUOTES, $char_set);
+                    $string = str_replace(array('%%%SMARTY_START%%%', '%%%SMARTY_END%%%'), array('&', ';'), $string);
+
+                    return $string;
+                }
+            }
+
+        case 'url':
+            return rawurlencode($string);
+
+        case 'urlpathinfo':
+            return str_replace('%2F', '/', rawurlencode($string));
+
+        case 'quotes':
+            // escape unescaped single quotes
+            return preg_replace("%(?<!\\\\)'%", "\\'", $string);
+
+        case 'hex':
+            // escape every byte into hex
+            // Note that the UTF-8 encoded character ä will be represented as %c3%a4
+            $return = '';
+            $_length = strlen($string);
+            for ($x = 0; $x < $_length; $x++) {
+                $return .= '%' . bin2hex($string[$x]);
+            }
+
+            return $return;
+
+        case 'hexentity':
+            $return = '';
+            if (Smarty::$_MBSTRING) {
+                require_once(SMARTY_PLUGINS_DIR . 'shared.mb_unicode.php');
+                $return = '';
+                foreach (smarty_mb_to_unicode($string, Smarty::$_CHARSET) as $unicode) {
+                    $return .= '&#x' . strtoupper(dechex($unicode)) . ';';
+                }
+
+                return $return;
+            }
+            // no MBString fallback
+            $_length = strlen($string);
+            for ($x = 0; $x < $_length; $x++) {
+                $return .= '&#x' . bin2hex($string[$x]) . ';';
+            }
+
+            return $return;
+
+        case 'decentity':
+            $return = '';
+            if (Smarty::$_MBSTRING) {
+                require_once(SMARTY_PLUGINS_DIR . 'shared.mb_unicode.php');
+                $return = '';
+                foreach (smarty_mb_to_unicode($string, Smarty::$_CHARSET) as $unicode) {
+                    $return .= '&#' . $unicode . ';';
+                }
+
+                return $return;
+            }
+            // no MBString fallback
+            $_length = strlen($string);
+            for ($x = 0; $x < $_length; $x++) {
+                $return .= '&#' . ord($string[$x]) . ';';
+            }
+
+            return $return;
+
+        case 'javascript':
+            // escape quotes and backslashes, newlines, etc.
+            return strtr($string, array('\\' => '\\\\', "'" => "\\'", '"' => '\\"', "\r" => '\\r', "\n" => '\\n', '</' => '<\/'));
+
+        case 'mail':
+            if (Smarty::$_MBSTRING) {
+                require_once(SMARTY_PLUGINS_DIR . 'shared.mb_str_replace.php');
+
+                return smarty_mb_str_replace(array('@', '.'), array(' [AT] ', ' [DOT] '), $string);
+            }
+            // no MBString fallback
+            return str_replace(array('@', '.'), array(' [AT] ', ' [DOT] '), $string);
+
+        case 'nonstd':
+            // escape non-standard chars, such as ms document quotes
+            $return = '';
+            if (Smarty::$_MBSTRING) {
+                require_once(SMARTY_PLUGINS_DIR . 'shared.mb_unicode.php');
+                foreach (smarty_mb_to_unicode($string, Smarty::$_CHARSET) as $unicode) {
+                    if ($unicode >= 126) {
+                        $return .= '&#' . $unicode . ';';
+                    } else {
+                        $return .= chr($unicode);
+                    }
+                }
+
+                return $return;
+            }
+
+            $_length = strlen($string);
+            for ($_i = 0; $_i < $_length; $_i++) {
+                $_ord = ord(substr($string, $_i, 1));
+                // non-standard char, escape it
+                if ($_ord >= 126) {
+                    $return .= '&#' . $_ord . ';';
+                } else {
+                    $return .= substr($string, $_i, 1);
+                }
+            }
+
+            return $return;
+
+        default:
+            return $string;
+    }
+}

resources/templates/engine/smarty/plugins/modifier.regex_replace.php

@@ -0,0 +1,55 @@
+<?php
+/**
+ * Smarty plugin
+ *
+ * @package Smarty
+ * @subpackage PluginsModifier
+ */
+
+/**
+ * Smarty regex_replace modifier plugin
+ *
+ * Type:     modifier<br>
+ * Name:     regex_replace<br>
+ * Purpose:  regular expression search/replace
+ *
+ * @link http://smarty.php.net/manual/en/language.modifier.regex.replace.php
+ *          regex_replace (Smarty online manual)
+ * @author Monte Ohrt <monte at ohrt dot com>
+ * @param string       $string   input string
+ * @param string|array $search   regular expression(s) to search for
+ * @param string|array $replace  string(s) that should be replaced
+ * @return string
+ */
+function smarty_modifier_regex_replace($string, $search, $replace)
+{
+    if (is_array($search)) {
+        foreach ($search as $idx => $s) {
+            $search[$idx] = _smarty_regex_replace_check($s);
+        }
+    } else {
+        $search = _smarty_regex_replace_check($search);
+    }
+
+    return preg_replace($search, $replace, $string);
+}
+
+/**
+ * @param  string $search string(s) that should be replaced
+ * @return string
+ * @ignore
+ */
+function _smarty_regex_replace_check($search)
+{
+    // null-byte injection detection
+    // anything behind the first null-byte is ignored
+    if (($pos = strpos($search,"\0")) !== false) {
+        $search = substr($search,0,$pos);
+    }
+    // remove eval-modifier from $search
+    if (preg_match('!([a-zA-Z\s]+)$!s', $search, $match) && (strpos($match[1], 'e') !== false)) {
+        $search = substr($search, 0, -strlen($match[1])) . preg_replace('![e\s]+!', '', $match[1]);
+    }
+
+    return $search;
+}

resources/templates/engine/smarty/plugins/modifier.replace.php

@@ -0,0 +1,32 @@
+<?php
+/**
+ * Smarty plugin
+ * @package Smarty
+ * @subpackage PluginsModifier
+ */
+
+/**
+ * Smarty replace modifier plugin
+ *
+ * Type:     modifier<br>
+ * Name:     replace<br>
+ * Purpose:  simple search/replace
+ *
+ * @link http://smarty.php.net/manual/en/language.modifier.replace.php replace (Smarty online manual)
+ * @author Monte Ohrt <monte at ohrt dot com>
+ * @author Uwe Tews
+ * @param string $string  input string
+ * @param string $search  text to search for
+ * @param string $replace replacement text
+ * @return string
+ */
+function smarty_modifier_replace($string, $search, $replace)
+{
+    if (Smarty::$_MBSTRING) {
+        require_once(SMARTY_PLUGINS_DIR . 'shared.mb_str_replace.php');
+
+        return smarty_mb_str_replace($search, $replace, $string);
+    }
+
+    return str_replace($search, $replace, $string);
+}

resources/templates/engine/smarty/plugins/modifier.spacify.php

@@ -0,0 +1,25 @@
+<?php
+/**
+ * Smarty plugin
+ * @package Smarty
+ * @subpackage PluginsModifier
+ */
+
+/**
+ * Smarty spacify modifier plugin
+ *
+ * Type:     modifier<br>
+ * Name:     spacify<br>
+ * Purpose:  add spaces between characters in a string
+ *
+ * @link http://smarty.php.net/manual/en/language.modifier.spacify.php spacify (Smarty online manual)
+ * @author Monte Ohrt <monte at ohrt dot com>
+ * @param string $string       input string
+ * @param string $spacify_char string to insert between characters.
+ * @return string
+ */
+function smarty_modifier_spacify($string, $spacify_char = ' ')
+{
+    // well… what about charsets besides latin and UTF-8?
+    return implode($spacify_char, preg_split('//' . Smarty::$_UTF8_MODIFIER, $string, -1, PREG_SPLIT_NO_EMPTY));
+}

resources/templates/engine/smarty/plugins/modifier.truncate.php

@@ -0,0 +1,62 @@
+<?php
+/**
+ * Smarty plugin
+ *
+ * @package Smarty
+ * @subpackage PluginsModifier
+ */
+
+/**
+ * Smarty truncate modifier plugin
+ *
+ * Type:     modifier<br>
+ * Name:     truncate<br>
+ * Purpose:  Truncate a string to a certain length if necessary,
+ *               optionally splitting in the middle of a word, and
+ *               appending the $etc string or inserting $etc into the middle.
+ *
+ * @link http://smarty.php.net/manual/en/language.modifier.truncate.php truncate (Smarty online manual)
+ * @author Monte Ohrt <monte at ohrt dot com>
+ * @param string  $string      input string
+ * @param integer $length      length of truncated text
+ * @param string  $etc         end string
+ * @param boolean $break_words truncate at word boundary
+ * @param boolean $middle      truncate in the middle of text
+ * @return string truncated string
+ */
+function smarty_modifier_truncate($string, $length = 80, $etc = '...', $break_words = false, $middle = false)
+{
+    if ($length == 0)
+        return '';
+
+    if (Smarty::$_MBSTRING) {
+        if (mb_strlen($string, Smarty::$_CHARSET) > $length) {
+            $length -= min($length, mb_strlen($etc, Smarty::$_CHARSET));
+            if (!$break_words && !$middle) {
+                $string = preg_replace('/\s+?(\S+)?$/' . Smarty::$_UTF8_MODIFIER, '', mb_substr($string, 0, $length + 1, Smarty::$_CHARSET));
+            }
+            if (!$middle) {
+                return mb_substr($string, 0, $length, Smarty::$_CHARSET) . $etc;
+            }
+
+            return mb_substr($string, 0, $length / 2, Smarty::$_CHARSET) . $etc . mb_substr($string, - $length / 2, $length, Smarty::$_CHARSET);
+        }
+
+        return $string;
+    }
+
+    // no MBString fallback
+    if (isset($string[$length])) {
+        $length -= min($length, strlen($etc));
+        if (!$break_words && !$middle) {
+            $string = preg_replace('/\s+?(\S+)?$/', '', substr($string, 0, $length + 1));
+        }
+        if (!$middle) {
+            return substr($string, 0, $length) . $etc;
+        }
+
+        return substr($string, 0, $length / 2) . $etc . substr($string, - $length / 2);
+    }
+
+    return $string;
+}

resources/templates/engine/smarty/plugins/modifiercompiler.cat.php

@@ -0,0 +1,28 @@
+<?php
+/**
+ * Smarty plugin
+ *
+ * @package Smarty
+ * @subpackage PluginsModifierCompiler
+ */
+
+/**
+ * Smarty cat modifier plugin
+ *
+ * Type:     modifier<br>
+ * Name:     cat<br>
+ * Date:     Feb 24, 2003<br>
+ * Purpose:  catenate a value to a variable<br>
+ * Input:    string to catenate<br>
+ * Example:  {$var|cat:"foo"}
+ *
+ * @link http://smarty.php.net/manual/en/language.modifier.cat.php cat
+ *          (Smarty online manual)
+ * @author   Uwe Tews
+ * @param array $params parameters
+ * @return string with compiled code
+ */
+function smarty_modifiercompiler_cat($params, $compiler)
+{
+    return '('.implode(').(', $params).')';
+}

resources/templates/engine/smarty/plugins/modifiercompiler.count_characters.php

@@ -0,0 +1,31 @@
+<?php
+/**
+ * Smarty plugin
+ *
+ * @package Smarty
+ * @subpackage PluginsModifierCompiler
+ */
+
+/**
+ * Smarty count_characters modifier plugin
+ *
+ * Type:     modifier<br>
+ * Name:     count_characteres<br>
+ * Purpose:  count the number of characters in a text
+ *
+ * @link http://www.smarty.net/manual/en/language.modifier.count.characters.php count_characters (Smarty online manual)
+ * @author Uwe Tews
+ * @param array $params parameters
+ * @return string with compiled code
+ */
+function smarty_modifiercompiler_count_characters($params, $compiler)
+{
+    if (!isset($params[1]) || $params[1] != 'true') {
+        return 'preg_match_all(\'/[^\s]/' . Smarty::$_UTF8_MODIFIER . '\',' . $params[0] . ', $tmp)';
+    }
+    if (Smarty::$_MBSTRING) {
+        return 'mb_strlen(' . $params[0] . ', \'' . addslashes(Smarty::$_CHARSET) . '\')';
+    }
+    // no MBString fallback
+    return 'strlen(' . $params[0] . ')';
+}

resources/templates/engine/smarty/plugins/modifiercompiler.count_paragraphs.php

@@ -0,0 +1,26 @@
+<?php
+/**
+ * Smarty plugin
+ *
+ * @package Smarty
+ * @subpackage PluginsModifierCompiler
+ */
+
+/**
+ * Smarty count_paragraphs modifier plugin
+ *
+ * Type:     modifier<br>
+ * Name:     count_paragraphs<br>
+ * Purpose:  count the number of paragraphs in a text
+ *
+ * @link http://www.smarty.net/manual/en/language.modifier.count.paragraphs.php
+ *          count_paragraphs (Smarty online manual)
+ * @author Uwe Tews
+ * @param array $params parameters
+ * @return string with compiled code
+ */
+function smarty_modifiercompiler_count_paragraphs($params, $compiler)
+{
+    // count \r or \n characters
+    return '(preg_match_all(\'#[\r\n]+#\', ' . $params[0] . ', $tmp)+1)';
+}

resources/templates/engine/smarty/plugins/modifiercompiler.count_sentences.php

@@ -0,0 +1,26 @@
+<?php
+/**
+ * Smarty plugin
+ *
+ * @package Smarty
+ * @subpackage PluginsModifierCompiler
+ */
+
+/**
+ * Smarty count_sentences modifier plugin
+ *
+ * Type:     modifier<br>
+ * Name:     count_sentences
+ * Purpose:  count the number of sentences in a text
+ *
+ * @link http://www.smarty.net/manual/en/language.modifier.count.paragraphs.php
+ *          count_sentences (Smarty online manual)
+ * @author Uwe Tews
+ * @param array $params parameters
+ * @return string with compiled code
+ */
+function smarty_modifiercompiler_count_sentences($params, $compiler)
+{
+    // find periods, question marks, exclamation marks with a word before but not after.
+    return 'preg_match_all("#\w[\.\?\!](\W|$)#S' . Smarty::$_UTF8_MODIFIER . '", ' . $params[0] . ', $tmp)';
+}

resources/templates/engine/smarty/plugins/modifiercompiler.count_words.php

@@ -0,0 +1,30 @@
+<?php
+/**
+ * Smarty plugin
+ *
+ * @package Smarty
+ * @subpackage PluginsModifierCompiler
+ */
+
+/**
+ * Smarty count_words modifier plugin
+ *
+ * Type:     modifier<br>
+ * Name:     count_words<br>
+ * Purpose:  count the number of words in a text
+ *
+ * @link http://www.smarty.net/manual/en/language.modifier.count.words.php count_words (Smarty online manual)
+ * @author Uwe Tews
+ * @param array $params parameters
+ * @return string with compiled code
+*/
+function smarty_modifiercompiler_count_words($params, $compiler)
+{
+    if (Smarty::$_MBSTRING) {
+        // return 'preg_match_all(\'#[\w\pL]+#' . Smarty::$_UTF8_MODIFIER . '\', ' . $params[0] . ', $tmp)';
+        // expression taken from http://de.php.net/manual/en/function.str-word-count.php#85592
+        return 'preg_match_all(\'/\p{L}[\p{L}\p{Mn}\p{Pd}\\\'\x{2019}]*/' . Smarty::$_UTF8_MODIFIER . '\', ' . $params[0] . ', $tmp)';
+    }
+    // no MBString fallback
+    return 'str_word_count(' . $params[0] . ')';
+}

resources/templates/engine/smarty/plugins/modifiercompiler.default.php

@@ -0,0 +1,34 @@
+<?php
+/**
+ * Smarty plugin
+ *
+ * @package Smarty
+ * @subpackage PluginsModifierCompiler
+ */
+
+/**
+ * Smarty default modifier plugin
+ *
+ * Type:     modifier<br>
+ * Name:     default<br>
+ * Purpose:  designate default value for empty variables
+ *
+ * @link http://www.smarty.net/manual/en/language.modifier.default.php default (Smarty online manual)
+ * @author Uwe Tews
+ * @param array $params parameters
+ * @return string with compiled code
+ */
+function smarty_modifiercompiler_default ($params, $compiler)
+{
+    $output = $params[0];
+    if (!isset($params[1])) {
+        $params[1] = "''";
+    }
+
+    array_shift($params);
+    foreach ($params as $param) {
+        $output = '(($tmp = @' . $output . ')===null||$tmp===\'\' ? ' . $param . ' : $tmp)';
+    }
+
+    return $output;
+}

resources/templates/engine/smarty/plugins/modifiercompiler.escape.php

@@ -0,0 +1,124 @@
+<?php
+/**
+ * Smarty plugin
+ *
+ * @package Smarty
+ * @subpackage PluginsModifierCompiler
+ */
+
+/**
+ * @ignore
+ */
+require_once( SMARTY_PLUGINS_DIR .'shared.literal_compiler_param.php' );
+
+/**
+ * Smarty escape modifier plugin
+ *
+ * Type:     modifier<br>
+ * Name:     escape<br>
+ * Purpose:  escape string for output
+ *
+ * @link http://www.smarty.net/docsv2/en/language.modifier.escape count_characters (Smarty online manual)
+ * @author Rodney Rehm
+ * @param array $params parameters
+ * @return string with compiled code
+ */
+function smarty_modifiercompiler_escape($params, $compiler)
+{
+    static $_double_encode = null;
+    if ($_double_encode === null) {
+        $_double_encode = version_compare(PHP_VERSION, '5.2.3', '>=');
+    }
+
+    try {
+        $esc_type = smarty_literal_compiler_param($params, 1, 'html');
+        $char_set = smarty_literal_compiler_param($params, 2, Smarty::$_CHARSET);
+        $double_encode = smarty_literal_compiler_param($params, 3, true);
+
+        if (!$char_set) {
+            $char_set = Smarty::$_CHARSET;
+        }
+
+        switch ($esc_type) {
+            case 'html':
+                if ($_double_encode) {
+                    return 'htmlspecialchars('
+                        . $params[0] .', ENT_QUOTES, '
+                        . var_export($char_set, true) . ', '
+                        . var_export($double_encode, true) . ')';
+                } elseif ($double_encode) {
+                    return 'htmlspecialchars('
+                        . $params[0] .', ENT_QUOTES, '
+                        . var_export($char_set, true) . ')';
+                } else {
+                    // fall back to modifier.escape.php
+                }
+
+            case 'htmlall':
+                if (Smarty::$_MBSTRING) {
+                    if ($_double_encode) {
+                        // php >=5.2.3 - go native
+                        return 'mb_convert_encoding(htmlspecialchars('
+                            . $params[0] .', ENT_QUOTES, '
+                            . var_export($char_set, true) . ', '
+                            . var_export($double_encode, true)
+                            . '), "HTML-ENTITIES", '
+                            . var_export($char_set, true) . ')';
+                    } elseif ($double_encode) {
+                        // php <5.2.3 - only handle double encoding
+                        return 'mb_convert_encoding(htmlspecialchars('
+                            . $params[0] .', ENT_QUOTES, '
+                            . var_export($char_set, true)
+                            . '), "HTML-ENTITIES", '
+                            . var_export($char_set, true) . ')';
+                    } else {
+                        // fall back to modifier.escape.php
+                    }
+                }
+
+                // no MBString fallback
+                if ($_double_encode) {
+                    // php >=5.2.3 - go native
+                    return 'htmlentities('
+                        . $params[0] .', ENT_QUOTES, '
+                        . var_export($char_set, true) . ', '
+                        . var_export($double_encode, true) . ')';
+                } elseif ($double_encode) {
+                    // php <5.2.3 - only handle double encoding
+                    return 'htmlentities('
+                        . $params[0] .', ENT_QUOTES, '
+                        . var_export($char_set, true) . ')';
+                } else {
+                    // fall back to modifier.escape.php
+                }
+
+            case 'url':
+                return 'rawurlencode(' . $params[0] . ')';
+
+            case 'urlpathinfo':
+                return 'str_replace("%2F", "/", rawurlencode(' . $params[0] . '))';
+
+            case 'quotes':
+                // escape unescaped single quotes
+                return 'preg_replace("%(?<!\\\\\\\\)\'%", "\\\'",' . $params[0] . ')';
+
+            case 'javascript':
+                // escape quotes and backslashes, newlines, etc.
+                return 'strtr(' . $params[0] . ', array("\\\\" => "\\\\\\\\", "\'" => "\\\\\'", "\"" => "\\\\\"", "\\r" => "\\\\r", "\\n" => "\\\n", "</" => "<\/" ))';
+
+        }
+    } catch (SmartyException $e) {
+        // pass through to regular plugin fallback
+    }
+
+    // could not optimize |escape call, so fallback to regular plugin
+    if ($compiler->template->caching && ($compiler->tag_nocache | $compiler->nocache)) {
+        $compiler->template->required_plugins['nocache']['escape']['modifier']['file'] = SMARTY_PLUGINS_DIR .'modifier.escape.php';
+        $compiler->template->required_plugins['nocache']['escape']['modifier']['function'] = 'smarty_modifier_escape';
+    } else {
+        $compiler->template->required_plugins['compiled']['escape']['modifier']['file'] = SMARTY_PLUGINS_DIR .'modifier.escape.php';
+        $compiler->template->required_plugins['compiled']['escape']['modifier']['function'] = 'smarty_modifier_escape';
+    }
+
+    return 'smarty_modifier_escape(' . join( ', ', $params ) . ')';
+}

resources/templates/engine/smarty/plugins/modifiercompiler.from_charset.php

@@ -0,0 +1,32 @@
+<?php
+/**
+ * Smarty plugin
+ *
+ * @package Smarty
+ * @subpackage PluginsModifierCompiler
+ */
+
+/**
+ * Smarty from_charset modifier plugin
+ *
+ * Type:     modifier<br>
+ * Name:     from_charset<br>
+ * Purpose:  convert character encoding from $charset to internal encoding
+ *
+ * @author Rodney Rehm
+ * @param array $params parameters
+ * @return string with compiled code
+ */
+function smarty_modifiercompiler_from_charset($params, $compiler)
+{
+    if (!Smarty::$_MBSTRING) {
+        // FIXME: (rodneyrehm) shouldn't this throw an error?
+        return $params[0];
+    }
+
+    if (!isset($params[1])) {
+        $params[1] = '"ISO-8859-1"';
+    }
+
+    return 'mb_convert_encoding(' . $params[0] . ', "' . addslashes(Smarty::$_CHARSET) . '", ' . $params[1] . ')';
+}

resources/templates/engine/smarty/plugins/modifiercompiler.indent.php

@@ -0,0 +1,31 @@
+<?php
+/**
+ * Smarty plugin
+ * @package Smarty
+ * @subpackage PluginsModifierCompiler
+ */
+
+/**
+ * Smarty indent modifier plugin
+ *
+ * Type:     modifier<br>
+ * Name:     indent<br>
+ * Purpose:  indent lines of text
+ *
+ * @link http://www.smarty.net/manual/en/language.modifier.indent.php indent (Smarty online manual)
+ * @author Uwe Tews
+ * @param array $params parameters
+ * @return string with compiled code
+ */
+
+function smarty_modifiercompiler_indent($params, $compiler)
+{
+    if (!isset($params[1])) {
+        $params[1] = 4;
+    }
+    if (!isset($params[2])) {
+        $params[2] = "' '";
+    }
+
+    return 'preg_replace(\'!^!m\',str_repeat(' . $params[2] . ',' . $params[1] . '),' . $params[0] . ')';
+}

resources/templates/engine/smarty/plugins/modifiercompiler.lower.php

@@ -0,0 +1,29 @@
+<?php
+/**
+ * Smarty plugin
+ * @package Smarty
+ * @subpackage PluginsModifierCompiler
+ */
+
+/**
+ * Smarty lower modifier plugin
+ *
+ * Type:     modifier<br>
+ * Name:     lower<br>
+ * Purpose:  convert string to lowercase
+ *
+ * @link http://www.smarty.net/manual/en/language.modifier.lower.php lower (Smarty online manual)
+ * @author Monte Ohrt <monte at ohrt dot com>
+ * @author Uwe Tews
+ * @param array $params parameters
+ * @return string with compiled code
+ */
+
+function smarty_modifiercompiler_lower($params, $compiler)
+{
+    if (Smarty::$_MBSTRING) {
+        return 'mb_strtolower(' . $params[0] . ', \'' . addslashes(Smarty::$_CHARSET) . '\')' ;
+    }
+    // no MBString fallback
+    return 'strtolower(' . $params[0] . ')';
+}

resources/templates/engine/smarty/plugins/modifiercompiler.noprint.php

@@ -0,0 +1,23 @@
+<?php
+/**
+ * Smarty plugin
+ *
+ * @package Smarty
+ * @subpackage PluginsModifierCompiler
+ */
+
+/**
+ * Smarty noprint modifier plugin
+ *
+ * Type:     modifier<br>
+ * Name:     noprint<br>
+ * Purpose:  return an empty string
+ *
+ * @author   Uwe Tews
+ * @param array $params parameters
+ * @return string with compiled code
+ */
+function smarty_modifiercompiler_noprint($params, $compiler)
+{
+    return "''";
+}

resources/templates/engine/smarty/plugins/modifiercompiler.string_format.php

@@ -0,0 +1,24 @@
+<?php
+/**
+ * Smarty plugin
+ *
+ * @package Smarty
+ * @subpackage PluginsModifierCompiler
+ */
+
+/**
+ * Smarty string_format modifier plugin
+ *
+ * Type:     modifier<br>
+ * Name:     string_format<br>
+ * Purpose:  format strings via sprintf
+ *
+ * @link http://www.smarty.net/manual/en/language.modifier.string.format.php string_format (Smarty online manual)
+ * @author Uwe Tews
+ * @param array $params parameters
+ * @return string with compiled code
+ */
+function smarty_modifiercompiler_string_format($params, $compiler)
+{
+    return 'sprintf(' . $params[1] . ',' . $params[0] . ')';
+}

resources/templates/engine/smarty/plugins/modifiercompiler.strip.php

@@ -0,0 +1,32 @@
+<?php
+/**
+ * Smarty plugin
+ *
+ * @package Smarty
+ * @subpackage PluginsModifierCompiler
+ */
+
+/**
+ * Smarty strip modifier plugin
+ *
+ * Type:     modifier<br>
+ * Name:     strip<br>
+ * Purpose:  Replace all repeated spaces, newlines, tabs
+ *              with a single space or supplied replacement string.<br>
+ * Example:  {$var|strip} {$var|strip:"&nbsp;"}<br>
+ * Date:     September 25th, 2002
+ *
+ * @link http://www.smarty.net/manual/en/language.modifier.strip.php strip (Smarty online manual)
+ * @author Uwe Tews
+ * @param array $params parameters
+ * @return string with compiled code
+ */
+
+function smarty_modifiercompiler_strip($params, $compiler)
+{
+    if (!isset($params[1])) {
+        $params[1] = "' '";
+    }
+
+    return "preg_replace('!\s+!" . Smarty::$_UTF8_MODIFIER . "', {$params[1]},{$params[0]})";
+}

resources/templates/engine/smarty/plugins/modifiercompiler.strip_tags.php

@@ -0,0 +1,28 @@
+<?php
+/**
+ * Smarty plugin
+ *
+ * @package Smarty
+ * @subpackage PluginsModifierCompiler
+ */
+
+/**
+ * Smarty strip_tags modifier plugin
+ *
+ * Type:     modifier<br>
+ * Name:     strip_tags<br>
+ * Purpose:  strip html tags from text
+ *
+ * @link http://www.smarty.net/manual/en/language.modifier.strip.tags.php strip_tags (Smarty online manual)
+ * @author Uwe Tews
+ * @param array $params parameters
+ * @return string with compiled code
+ */
+function smarty_modifiercompiler_strip_tags($params, $compiler)
+{
+ if (!isset($params[1]) || $params[1] === true ||  trim($params[1],'"') == 'true') {
+         return "preg_replace('!<[^>]*?>!', ' ', {$params[0]})";
+    } else {
+        return 'strip_tags(' . $params[0] . ')';
+    }
+}

resources/templates/engine/smarty/plugins/modifiercompiler.to_charset.php

@@ -0,0 +1,32 @@
+<?php
+/**
+ * Smarty plugin
+ *
+ * @package Smarty
+ * @subpackage PluginsModifierCompiler
+ */
+
+/**
+ * Smarty to_charset modifier plugin
+ *
+ * Type:     modifier<br>
+ * Name:     to_charset<br>
+ * Purpose:  convert character encoding from internal encoding to $charset
+ *
+ * @author Rodney Rehm
+ * @param array $params parameters
+ * @return string with compiled code
+ */
+function smarty_modifiercompiler_to_charset($params, $compiler)
+{
+    if (!Smarty::$_MBSTRING) {
+        // FIXME: (rodneyrehm) shouldn't this throw an error?
+        return $params[0];
+    }
+
+    if (!isset($params[1])) {
+        $params[1] = '"ISO-8859-1"';
+    }
+
+    return 'mb_convert_encoding(' . $params[0] . ', ' . $params[1] . ', "' . addslashes(Smarty::$_CHARSET) . '")';
+}

resources/templates/engine/smarty/plugins/modifiercompiler.unescape.php

@@ -0,0 +1,49 @@
+<?php
+/**
+ * Smarty plugin
+ *
+ * @package Smarty
+ * @subpackage PluginsModifierCompiler
+ */
+
+/**
+ * Smarty unescape modifier plugin
+ *
+ * Type:     modifier<br>
+ * Name:     unescape<br>
+ * Purpose:  unescape html entities
+ *
+ * @author Rodney Rehm
+ * @param array $params parameters
+ * @return string with compiled code
+ */
+function smarty_modifiercompiler_unescape($params, $compiler)
+{
+    if (!isset($params[1])) {
+        $params[1] = 'html';
+    }
+    if (!isset($params[2])) {
+        $params[2] = '\'' . addslashes(Smarty::$_CHARSET) . '\'';
+    } else {
+        $params[2] = "'" . $params[2] . "'";
+    }
+
+    switch (trim($params[1], '"\'')) {
+        case 'entity':
+        case 'htmlall':
+            if (Smarty::$_MBSTRING) {
+                return 'mb_convert_encoding(' . $params[0] . ', ' . $params[2] . ', \'HTML-ENTITIES\')';
+            }
+
+            return 'html_entity_decode(' . $params[0] . ', ENT_NOQUOTES, ' . $params[2] . ')';
+
+        case 'html':
+            return 'htmlspecialchars_decode(' . $params[0] . ', ENT_QUOTES)';
+
+        case 'url':
+            return 'rawurldecode(' . $params[0] . ')';
+
+        default:
+            return $params[0];
+    }
+}

resources/templates/engine/smarty/plugins/modifiercompiler.upper.php

@@ -0,0 +1,28 @@
+<?php
+/**
+ * Smarty plugin
+ *
+ * @package Smarty
+ * @subpackage PluginsModifierCompiler
+ */
+
+/**
+ * Smarty upper modifier plugin
+ *
+ * Type:     modifier<br>
+ * Name:     lower<br>
+ * Purpose:  convert string to uppercase
+ *
+ * @link http://smarty.php.net/manual/en/language.modifier.upper.php lower (Smarty online manual)
+ * @author Uwe Tews
+ * @param array $params parameters
+ * @return string with compiled code
+ */
+function smarty_modifiercompiler_upper($params, $compiler)
+{
+    if (Smarty::$_MBSTRING) {
+        return 'mb_strtoupper(' . $params[0] . ', \'' . addslashes(Smarty::$_CHARSET) . '\')' ;
+    }
+    // no MBString fallback
+    return 'strtoupper(' . $params[0] . ')';
+}

resources/templates/engine/smarty/plugins/modifiercompiler.wordwrap.php

@@ -0,0 +1,45 @@
+<?php
+/**
+ * Smarty plugin
+ *
+ * @package Smarty
+ * @subpackage PluginsModifierCompiler
+ */
+
+/**
+ * Smarty wordwrap modifier plugin
+ *
+ * Type:     modifier<br>
+ * Name:     wordwrap<br>
+ * Purpose:  wrap a string of text at a given length
+ *
+ * @link http://smarty.php.net/manual/en/language.modifier.wordwrap.php wordwrap (Smarty online manual)
+ * @author Uwe Tews
+ * @param array $params parameters
+ * @return string with compiled code
+ */
+function smarty_modifiercompiler_wordwrap($params, $compiler)
+{
+    if (!isset($params[1])) {
+        $params[1] = 80;
+    }
+    if (!isset($params[2])) {
+        $params[2] = '"\n"';
+    }
+    if (!isset($params[3])) {
+        $params[3] = 'false';
+    }
+    $function = 'wordwrap';
+    if (Smarty::$_MBSTRING) {
+    if ($compiler->template->caching && ($compiler->tag_nocache | $compiler->nocache)) {
+            $compiler->template->required_plugins['nocache']['wordwrap']['modifier']['file'] = SMARTY_PLUGINS_DIR .'shared.mb_wordwrap.php';
+            $compiler->template->required_plugins['nocache']['wordwrap']['modifier']['function'] = 'smarty_mb_wordwrap';
+        } else {
+            $compiler->template->required_plugins['compiled']['wordwrap']['modifier']['file'] = SMARTY_PLUGINS_DIR .'shared.mb_wordwrap.php';
+            $compiler->template->required_plugins['compiled']['wordwrap']['modifier']['function'] = 'smarty_mb_wordwrap';
+        }
+        $function = 'smarty_mb_wordwrap';
+    }
+
+    return $function . '(' . $params[0] . ',' . $params[1] . ',' . $params[2] . ',' . $params[3] . ')';
+}

resources/templates/engine/smarty/plugins/outputfilter.trimwhitespace.php

@@ -0,0 +1,90 @@
+<?php
+/**
+ * Smarty plugin
+ *
+ * @package Smarty
+ * @subpackage PluginsFilter
+ */
+
+/**
+ * Smarty trimwhitespace outputfilter plugin
+ *
+ * Trim unnecessary whitespace from HTML markup.
+ *
+ * @author   Rodney Rehm
+ * @param string                   $source input string
+ * @param Smarty_Internal_Template $smarty Smarty object
+ * @return string filtered output
+ * @todo substr_replace() is not overloaded by mbstring.func_overload - so this function might fail!
+ */
+function smarty_outputfilter_trimwhitespace($source, Smarty_Internal_Template $smarty)
+{
+    $store = array();
+    $_store = 0;
+    $_offset = 0;
+
+    // Unify Line-Breaks to \n
+    $source = preg_replace("/\015\012|\015|\012/", "\n", $source);
+
+    // capture Internet Explorer Conditional Comments
+    if (preg_match_all('#<!--\[[^\]]+\]>.*?<!\[[^\]]+\]-->#is', $source, $matches, PREG_OFFSET_CAPTURE | PREG_SET_ORDER)) {
+        foreach ($matches as $match) {
+            $store[] = $match[0][0];
+            $_length = strlen($match[0][0]);
+            $replace = '@!@SMARTY:' . $_store . ':SMARTY@!@';
+            $source = substr_replace($source, $replace, $match[0][1] - $_offset, $_length);
+
+            $_offset += $_length - strlen($replace);
+            $_store++;
+        }
+    }
+
+    // Strip all HTML-Comments
+    // yes, even the ones in <script> - see http://stackoverflow.com/a/808850/515124
+    $source = preg_replace( '#<!--.*?-->#ms', '', $source );
+
+    // capture html elements not to be messed with
+    $_offset = 0;
+    if (preg_match_all('#<(script|pre|textarea)[^>]*>.*?</\\1>#is', $source, $matches, PREG_OFFSET_CAPTURE | PREG_SET_ORDER)) {
+        foreach ($matches as $match) {
+            $store[] = $match[0][0];
+            $_length = strlen($match[0][0]);
+            $replace = '@!@SMARTY:' . $_store . ':SMARTY@!@';
+            $source = substr_replace($source, $replace, $match[0][1] - $_offset, $_length);
+
+            $_offset += $_length - strlen($replace);
+            $_store++;
+        }
+    }
+
+    $expressions = array(
+        // replace multiple spaces between tags by a single space
+        // can't remove them entirely, becaue that might break poorly implemented CSS display:inline-block elements
+        '#(:SMARTY@!@|>)\s+(?=@!@SMARTY:|<)#s' => '\1 \2',
+        // remove spaces between attributes (but not in attribute values!)
+        '#(([a-z0-9]\s*=\s*(["\'])[^\3]*?\3)|<[a-z0-9_]+)\s+([a-z/>])#is' => '\1 \4',
+        // note: for some very weird reason trim() seems to remove spaces inside attributes.
+        // maybe a \0 byte or something is interfering?
+        '#^\s+<#Ss' => '<',
+        '#>\s+$#Ss' => '>',
+    );
+
+    $source = preg_replace( array_keys($expressions), array_values($expressions), $source );
+    // note: for some very weird reason trim() seems to remove spaces inside attributes.
+    // maybe a \0 byte or something is interfering?
+    // $source = trim( $source );
+
+    $_offset = 0;
+    if (preg_match_all('#@!@SMARTY:([0-9]+):SMARTY@!@#is', $source, $matches, PREG_OFFSET_CAPTURE | PREG_SET_ORDER)) {
+        foreach ($matches as $match) {
+            $_length = strlen($match[0][0]);
+            $replace = $store[$match[1][0]];
+            $source = substr_replace($source, $replace, $match[0][1] + $_offset, $_length);
+
+            $_offset += strlen($replace) - $_length;
+            $_store++;
+        }
+    }
+
+    return $source;
+}

resources/templates/engine/smarty/plugins/shared.escape_special_chars.php

@@ -0,0 +1,51 @@
+<?php
+/**
+ * Smarty shared plugin
+ *
+ * @package Smarty
+ * @subpackage PluginsShared
+ */
+
+if (version_compare(PHP_VERSION, '5.2.3', '>=')) {
+    /**
+     * escape_special_chars common function
+     *
+     * Function: smarty_function_escape_special_chars<br>
+     * Purpose:  used by other smarty functions to escape
+     *           special chars except for already escaped ones
+     *
+     * @author   Monte Ohrt <monte at ohrt dot com>
+     * @param  string $string text that should by escaped
+     * @return string
+     */
+    function smarty_function_escape_special_chars($string)
+    {
+        if (!is_array($string)) {
+            $string = htmlspecialchars($string, ENT_COMPAT, Smarty::$_CHARSET, false);
+        }
+
+        return $string;
+    }
+} else {
+    /**
+     * escape_special_chars common function
+     *
+     * Function: smarty_function_escape_special_chars<br>
+     * Purpose:  used by other smarty functions to escape
+     *           special chars except for already escaped ones
+     *
+     * @author   Monte Ohrt <monte at ohrt dot com>
+     * @param  string $string text that should by escaped
+     * @return string
+     */
+    function smarty_function_escape_special_chars($string)
+    {
+        if (!is_array($string)) {
+            $string = preg_replace('!&(#?\w+);!', '%%%SMARTY_START%%%\\1%%%SMARTY_END%%%', $string);
+            $string = htmlspecialchars($string);
+            $string = str_replace(array('%%%SMARTY_START%%%', '%%%SMARTY_END%%%'), array('&', ';'), $string);
+        }
+
+        return $string;
+    }
+}

resources/templates/engine/smarty/plugins/shared.literal_compiler_param.php

@@ -0,0 +1,34 @@
+<?php
+/**
+ * Smarty plugin
+ *
+ * @package Smarty
+ * @subpackage PluginsShared
+ */
+
+/**
+ * evaluate compiler parameter
+ *
+ * @param array   $params  parameter array as given to the compiler function
+ * @param integer $index   array index of the parameter to convert
+ * @param mixed   $default value to be returned if the parameter is not present
+ * @return mixed evaluated value of parameter or $default
+ * @throws SmartyException if parameter is not a literal (but an expression, variable, …)
+ * @author Rodney Rehm
+ */
+function smarty_literal_compiler_param($params, $index, $default=null)
+{
+    // not set, go default
+    if (!isset($params[$index])) {
+        return $default;
+    }
+    // test if param is a literal
+    if (!preg_match('/^([\'"]?)[a-zA-Z0-9]+(\\1)$/', $params[$index])) {
+        throw new SmartyException('$param[' . $index . '] is not a literal and is thus not evaluatable at compile time');
+    }
+
+    $t = null;
+    eval("\$t = " . $params[$index] . ";");
+
+    return $t;
+}

resources/templates/engine/smarty/plugins/shared.make_timestamp.php

@@ -0,0 +1,41 @@
+<?php
+/**
+ * Smarty shared plugin
+ *
+ * @package Smarty
+ * @subpackage PluginsShared
+ */
+
+/**
+ * Function: smarty_make_timestamp<br>
+ * Purpose:  used by other smarty functions to make a timestamp from a string.
+ *
+ * @author   Monte Ohrt <monte at ohrt dot com>
+ * @param DateTime|int|string $string  date object, timestamp or string that can be converted using strtotime()
+ * @return int
+ */
+function smarty_make_timestamp($string)
+{
+    if (empty($string)) {
+        // use "now":
+        return time();
+    } elseif ($string instanceof DateTime) {
+        return $string->getTimestamp();
+    } elseif (strlen($string) == 14 && ctype_digit($string)) {
+        // it is mysql timestamp format of YYYYMMDDHHMMSS?
+        return mktime(substr($string, 8, 2),substr($string, 10, 2),substr($string, 12, 2),
+                       substr($string, 4, 2),substr($string, 6, 2),substr($string, 0, 4));
+    } elseif (is_numeric($string)) {
+        // it is a numeric string, we handle it as timestamp
+        return (int) $string;
+    } else {
+        // strtotime should handle it
+        $time = strtotime($string);
+        if ($time == -1 || $time === false) {
+            // strtotime() was not able to parse $string, use "now":
+            return time();
+        }
+
+        return $time;
+    }
+}

resources/templates/engine/smarty/plugins/shared.mb_str_replace.php

@@ -0,0 +1,55 @@
+<?php
+/**
+ * Smarty shared plugin
+ *
+ * @package Smarty
+ * @subpackage PluginsShared
+ */
+if (!function_exists('smarty_mb_str_replace')) {
+
+    /**
+     * Multibyte string replace
+     *
+     * @param  string $search  the string to be searched
+     * @param  string $replace the replacement string
+     * @param  string $subject the source string
+     * @param  int    &$count  number of matches found
+     * @return string replaced string
+     * @author Rodney Rehm
+     */
+    function smarty_mb_str_replace($search, $replace, $subject, &$count=0)
+    {
+        if (!is_array($search) && is_array($replace)) {
+            return false;
+        }
+        if (is_array($subject)) {
+            // call mb_replace for each single string in $subject
+            foreach ($subject as &$string) {
+                $string = &smarty_mb_str_replace($search, $replace, $string, $c);
+                $count += $c;
+            }
+        } elseif (is_array($search)) {
+            if (!is_array($replace)) {
+                foreach ($search as &$string) {
+                    $subject = smarty_mb_str_replace($string, $replace, $subject, $c);
+                    $count += $c;
+                }
+            } else {
+                $n = max(count($search), count($replace));
+                while ($n--) {
+                    $subject = smarty_mb_str_replace(current($search), current($replace), $subject, $c);
+                    $count += $c;
+                    next($search);
+                    next($replace);
+                }
+            }
+        } else {
+            $parts = mb_split(preg_quote($search), $subject);
+            $count = count($parts) - 1;
+            $subject = implode($replace, $parts);
+        }
+
+        return $subject;
+    }
+
+}

resources/templates/engine/smarty/plugins/shared.mb_unicode.php

@@ -0,0 +1,50 @@
+<?php
+/**
+ * Smarty shared plugin
+ *
+ * @package Smarty
+ * @subpackage PluginsShared
+ */
+
+/**
+ * convert characters to their decimal unicode equivalents
+ *
+ * @link http://www.ibm.com/developerworks/library/os-php-unicode/index.html#listing3 for inspiration
+ * @param string $string   characters to calculate unicode of
+ * @param string $encoding encoding of $string, if null mb_internal_encoding() is used
+ * @return array sequence of unicodes
+ * @author Rodney Rehm
+ */
+function smarty_mb_to_unicode($string, $encoding=null)
+{
+    if ($encoding) {
+        $expanded = mb_convert_encoding($string, "UTF-32BE", $encoding);
+    } else {
+        $expanded = mb_convert_encoding($string, "UTF-32BE");
+    }
+
+    return unpack("N*", $expanded);
+}
+
+/**
+ * convert unicodes to the character of given encoding
+ *
+ * @link http://www.ibm.com/developerworks/library/os-php-unicode/index.html#listing3 for inspiration
+ * @param integer|array $unicode  single unicode or list of unicodes to convert
+ * @param string        $encoding encoding of returned string, if null mb_internal_encoding() is used
+ * @return string unicode as character sequence in given $encoding
+ * @author Rodney Rehm
+ */
+function smarty_mb_from_unicode($unicode, $encoding=null)
+{
+    $t = '';
+    if (!$encoding) {
+        $encoding = mb_internal_encoding();
+    }
+    foreach ((array) $unicode as $utf32be) {
+        $character = pack("N*", $utf32be);
+        $t .= mb_convert_encoding($character, $encoding, "UTF-32BE");
+    }
+
+    return $t;
+}

resources/templates/engine/smarty/plugins/shared.mb_wordwrap.php

@@ -0,0 +1,82 @@
+<?php
+/**
+ * Smarty shared plugin
+ *
+ * @package Smarty
+ * @subpackage PluginsShared
+ */
+
+if (!function_exists('smarty_mb_wordwrap')) {
+
+    /**
+     * Wrap a string to a given number of characters
+     *
+     * @link http://php.net/manual/en/function.wordwrap.php for similarity
+     * @param  string  $str   the string to wrap
+     * @param  int     $width the width of the output
+     * @param  string  $break the character used to break the line
+     * @param  boolean $cut   ignored parameter, just for the sake of
+     * @return string  wrapped string
+     * @author Rodney Rehm
+     */
+    function smarty_mb_wordwrap($str, $width=75, $break="\n", $cut=false)
+    {
+        // break words into tokens using white space as a delimiter
+        $tokens = preg_split('!(\s)!S' . Smarty::$_UTF8_MODIFIER, $str, -1, PREG_SPLIT_NO_EMPTY + PREG_SPLIT_DELIM_CAPTURE);
+        $length = 0;
+        $t = '';
+        $_previous = false;
+
+        foreach ($tokens as $_token) {
+            $token_length = mb_strlen($_token, Smarty::$_CHARSET);
+            $_tokens = array($_token);
+            if ($token_length > $width) {
+                // remove last space
+                $t = mb_substr($t, 0, -1, Smarty::$_CHARSET);
+                $_previous = false;
+                $length = 0;
+
+                if ($cut) {
+                    $_tokens = preg_split('!(.{' . $width . '})!S' . Smarty::$_UTF8_MODIFIER, $_token, -1, PREG_SPLIT_NO_EMPTY + PREG_SPLIT_DELIM_CAPTURE);
+                    // broken words go on a new line
+                    $t .= $break;
+                }
+            }
+
+            foreach ($_tokens as $token) {
+                $_space = !!preg_match('!^\s$!S' . Smarty::$_UTF8_MODIFIER, $token);
+                $token_length = mb_strlen($token, Smarty::$_CHARSET);
+                $length += $token_length;
+
+                if ($length > $width) {
+                    // remove space before inserted break
+                    if ($_previous && $token_length < $width) {
+                        $t = mb_substr($t, 0, -1, Smarty::$_CHARSET);
+                    }
+
+                    // add the break before the token
+                    $t .= $break;
+                    $length = $token_length;
+
+                    // skip space after inserting a break
+                    if ($_space) {
+                        $length = 0;
+                        continue;
+                    }
+                } elseif ($token == "\n") {
+                    // hard break must reset counters
+                    $_previous = 0;
+                    $length = 0;
+                } else {
+                    // remember if we had a space or not
+                    $_previous = $_space;
+                }
+                // add the token
+                $t .= $token;
+            }
+        }
+
+        return $t;
+    }
+
+}

resources/templates/engine/smarty/plugins/variablefilter.htmlspecialchars.php

@@ -0,0 +1,19 @@
+<?php
+/**
+ * Smarty plugin
+ *
+ * @package Smarty
+ * @subpackage PluginsFilter
+ */
+
+/**
+ * Smarty htmlspecialchars variablefilter plugin
+ *
+ * @param string                   $source input string
+ * @param Smarty_Internal_Template $smarty Smarty object
+ * @return string filtered output
+ */
+function smarty_variablefilter_htmlspecialchars($source, $smarty)
+{
+    return htmlspecialchars($source, ENT_QUOTES, Smarty::$_CHARSET);
+}

resources/templates/engine/smarty/sysplugins/smarty_cacheresource.php

@@ -0,0 +1,389 @@
+<?php
+/**
+* Smarty Internal Plugin
+*
+* @package Smarty
+* @subpackage Cacher
+*/
+
+/**
+* Cache Handler API
+*
+* @package Smarty
+* @subpackage Cacher
+* @author Rodney Rehm
+*/
+abstract class Smarty_CacheResource
+{
+    /**
+    * cache for Smarty_CacheResource instances
+    * @var array
+    */
+    public static $resources = array();
+
+    /**
+    * resource types provided by the core
+    * @var array
+    */
+    protected static $sysplugins = array(
+        'file' => true,
+    );
+
+    /**
+    * populate Cached Object with meta data from Resource
+    *
+    * @param Smarty_Template_Cached $cached cached object
+    * @param Smarty_Internal_Template $_template template object
+    * @return void
+    */
+    abstract public function populate(Smarty_Template_Cached $cached, Smarty_Internal_Template $_template);
+
+    /**
+    * populate Cached Object with timestamp and exists from Resource
+    *
+    * @param Smarty_Template_Cached $source cached object
+    * @return void
+    */
+    abstract public function populateTimestamp(Smarty_Template_Cached $cached);
+
+    /**
+    * Read the cached template and process header
+    *
+    * @param Smarty_Internal_Template $_template template object
+    * @param Smarty_Template_Cached $cached cached object
+    * @return booelan true or false if the cached content does not exist
+    */
+    abstract public function process(Smarty_Internal_Template $_template, Smarty_Template_Cached $cached=null);
+
+    /**
+    * Write the rendered template output to cache
+    *
+    * @param Smarty_Internal_Template $_template template object
+    * @param string $content content to cache
+    * @return boolean success
+    */
+    abstract public function writeCachedContent(Smarty_Internal_Template $_template, $content);
+
+    /**
+    * Return cached content
+    *
+    * @param Smarty_Internal_Template $_template template object
+    * @param string $content content of cache
+    */
+    public function getCachedContent(Smarty_Internal_Template $_template)
+    {
+        if ($_template->cached->handler->process($_template)) {
+            ob_start();
+            $_template->properties['unifunc']($_template);
+
+            return ob_get_clean();
+        }
+
+        return null;
+    }
+
+    /**
+    * Empty cache
+    *
+    * @param Smarty $smarty Smarty object
+    * @param integer $exp_time expiration time (number of seconds, not timestamp)
+    * @return integer number of cache files deleted
+    */
+    abstract public function clearAll(Smarty $smarty, $exp_time=null);
+
+    /**
+    * Empty cache for a specific template
+    *
+    * @param Smarty $smarty Smarty object
+    * @param string $resource_name template name
+    * @param string $cache_id cache id
+    * @param string $compile_id compile id
+    * @param integer $exp_time expiration time (number of seconds, not timestamp)
+    * @return integer number of cache files deleted
+    */
+    abstract public function clear(Smarty $smarty, $resource_name, $cache_id, $compile_id, $exp_time);
+
+    public function locked(Smarty $smarty, Smarty_Template_Cached $cached)
+    {
+        // theoretically locking_timeout should be checked against time_limit (max_execution_time)
+        $start = microtime(true);
+        $hadLock = null;
+        while ($this->hasLock($smarty, $cached)) {
+            $hadLock = true;
+            if (microtime(true) - $start > $smarty->locking_timeout) {
+                // abort waiting for lock release
+                return false;
+            }
+            sleep(1);
+        }
+
+        return $hadLock;
+    }
+
+    public function hasLock(Smarty $smarty, Smarty_Template_Cached $cached)
+    {
+        // check if lock exists
+        return false;
+    }
+
+    public function acquireLock(Smarty $smarty, Smarty_Template_Cached $cached)
+    {
+        // create lock
+        return true;
+    }
+
+    public function releaseLock(Smarty $smarty, Smarty_Template_Cached $cached)
+    {
+        // release lock
+        return true;
+    }
+
+    /**
+    * Load Cache Resource Handler
+    *
+    * @param Smarty $smarty Smarty object
+    * @param string $type name of the cache resource
+    * @return Smarty_CacheResource Cache Resource Handler
+    */
+    public static function load(Smarty $smarty, $type = null)
+    {
+        if (!isset($type)) {
+            $type = $smarty->caching_type;
+        }
+
+        // try smarty's cache
+        if (isset($smarty->_cacheresource_handlers[$type])) {
+            return $smarty->_cacheresource_handlers[$type];
+        }
+
+        // try registered resource
+        if (isset($smarty->registered_cache_resources[$type])) {
+            // do not cache these instances as they may vary from instance to instance
+            return $smarty->_cacheresource_handlers[$type] = $smarty->registered_cache_resources[$type];
+        }
+        // try sysplugins dir
+        if (isset(self::$sysplugins[$type])) {
+            if (!isset(self::$resources[$type])) {
+                $cache_resource_class = 'Smarty_Internal_CacheResource_' . ucfirst($type);
+                self::$resources[$type] = new $cache_resource_class();
+            }
+
+            return $smarty->_cacheresource_handlers[$type] = self::$resources[$type];
+        }
+        // try plugins dir
+        $cache_resource_class = 'Smarty_CacheResource_' . ucfirst($type);
+        if ($smarty->loadPlugin($cache_resource_class)) {
+            if (!isset(self::$resources[$type])) {
+                self::$resources[$type] = new $cache_resource_class();
+            }
+
+            return $smarty->_cacheresource_handlers[$type] = self::$resources[$type];
+        }
+        // give up
+        throw new SmartyException("Unable to load cache resource '{$type}'");
+    }
+
+    /**
+    * Invalid Loaded Cache Files
+    *
+    * @param Smarty $smarty Smarty object
+    */
+    public static function invalidLoadedCache(Smarty $smarty)
+    {
+        foreach ($smarty->template_objects as $tpl) {
+            if (isset($tpl->cached)) {
+                $tpl->cached->valid = false;
+                $tpl->cached->processed = false;
+            }
+        }
+    }
+}
+
+/**
+* Smarty Resource Data Object
+*
+* Cache Data Container for Template Files
+*
+* @package Smarty
+* @subpackage TemplateResources
+* @author Rodney Rehm
+*/
+class Smarty_Template_Cached
+{
+    /**
+    * Source Filepath
+    * @var string
+    */
+    public $filepath = false;
+
+    /**
+    * Source Content
+    * @var string
+    */
+    public $content = null;
+
+    /**
+    * Source Timestamp
+    * @var integer
+    */
+    public $timestamp = false;
+
+    /**
+    * Source Existence
+    * @var boolean
+    */
+    public $exists = false;
+
+    /**
+    * Cache Is Valid
+    * @var boolean
+    */
+    public $valid = false;
+
+    /**
+    * Cache was processed
+    * @var boolean
+    */
+    public $processed = false;
+
+    /**
+    * CacheResource Handler
+    * @var Smarty_CacheResource
+    */
+    public $handler = null;
+
+    /**
+    * Template Compile Id (Smarty_Internal_Template::$compile_id)
+    * @var string
+    */
+    public $compile_id = null;
+
+    /**
+    * Template Cache Id (Smarty_Internal_Template::$cache_id)
+    * @var string
+    */
+    public $cache_id = null;
+
+    /**
+    * Id for cache locking
+    * @var string
+    */
+    public $lock_id = null;
+
+    /**
+    * flag that cache is locked by this instance
+    * @var bool
+    */
+    public $is_locked = false;
+
+    /**
+    * Source Object
+    * @var Smarty_Template_Source
+    */
+    public $source = null;
+
+    /**
+    * create Cached Object container
+    *
+    * @param Smarty_Internal_Template $_template template object
+    */
+    public function __construct(Smarty_Internal_Template $_template)
+    {
+        $this->compile_id = $_template->compile_id;
+        $this->cache_id = $_template->cache_id;
+        $this->source = $_template->source;
+        $_template->cached = $this;
+        $smarty = $_template->smarty;
+
+        //
+        // load resource handler
+        //
+        $this->handler = $handler = Smarty_CacheResource::load($smarty); // Note: prone to circular references
+
+        //
+        //    check if cache is valid
+        //
+        if (!($_template->caching == Smarty::CACHING_LIFETIME_CURRENT || $_template->caching == Smarty::CACHING_LIFETIME_SAVED) || $_template->source->recompiled) {
+            $handler->populate($this, $_template);
+
+            return;
+        }
+        while (true) {
+            while (true) {
+                $handler->populate($this, $_template);
+                if ($this->timestamp === false || $smarty->force_compile || $smarty->force_cache) {
+                    $this->valid = false;
+                } else {
+                    $this->valid = true;
+                }
+                if ($this->valid && $_template->caching == Smarty::CACHING_LIFETIME_CURRENT && $_template->cache_lifetime >= 0 && time() > ($this->timestamp + $_template->cache_lifetime)) {
+                    // lifetime expired
+                    $this->valid = false;
+                }
+                if ($this->valid || !$_template->smarty->cache_locking) {
+                    break;
+                }
+                if (!$this->handler->locked($_template->smarty, $this)) {
+                    $this->handler->acquireLock($_template->smarty, $this);
+                    break 2;
+                }
+            }
+            if ($this->valid) {
+                if (!$_template->smarty->cache_locking || $this->handler->locked($_template->smarty, $this) === null) {
+                    // load cache file for the following checks
+                    if ($smarty->debugging) {
+                        Smarty_Internal_Debug::start_cache($_template);
+                    }
+                    if ($handler->process($_template, $this) === false) {
+                        $this->valid = false;
+                    } else {
+                        $this->processed = true;
+                    }
+                    if ($smarty->debugging) {
+                        Smarty_Internal_Debug::end_cache($_template);
+                    }
+                } else {
+                    continue;
+                }
+            } else {
+                return;
+            }
+            if ($this->valid && $_template->caching === Smarty::CACHING_LIFETIME_SAVED && $_template->properties['cache_lifetime'] >= 0 && (time() > ($_template->cached->timestamp + $_template->properties['cache_lifetime']))) {
+                $this->valid = false;
+            }
+            if (!$this->valid && $_template->smarty->cache_locking) {
+                $this->handler->acquireLock($_template->smarty, $this);
+
+                return;
+            } else {
+                return;
+            }
+        }
+    }
+
+    /**
+    * Write this cache object to handler
+    *
+    * @param Smarty_Internal_Template $_template template object
+    * @param string $content content to cache
+    * @return boolean success
+    */
+    public function write(Smarty_Internal_Template $_template, $content)
+    {
+        if (!$_template->source->recompiled) {
+            if ($this->handler->writeCachedContent($_template, $content)) {
+                $this->timestamp = time();
+                $this->exists = true;
+                $this->valid = true;
+                if ($_template->smarty->cache_locking) {
+                    $this->handler->releaseLock($_template->smarty, $this);
+                }
+
+                return true;
+            }
+        }
+
+        return false;
+    }
+
+}

resources/templates/engine/smarty/sysplugins/smarty_cacheresource_custom.php

@@ -0,0 +1,241 @@
+<?php
+/**
+ * Smarty Internal Plugin
+ *
+ * @package Smarty
+ * @subpackage Cacher
+ */
+
+/**
+ * Cache Handler API
+ *
+ * @package Smarty
+ * @subpackage Cacher
+ * @author Rodney Rehm
+ */
+abstract class Smarty_CacheResource_Custom extends Smarty_CacheResource
+{
+    /**
+     * fetch cached content and its modification time from data source
+     *
+     * @param  string  $id         unique cache content identifier
+     * @param  string  $name       template name
+     * @param  string  $cache_id   cache id
+     * @param  string  $compile_id compile id
+     * @param  string  $content    cached content
+     * @param  integer $mtime      cache modification timestamp (epoch)
+     * @return void
+     */
+    abstract protected function fetch($id, $name, $cache_id, $compile_id, &$content, &$mtime);
+
+    /**
+     * Fetch cached content's modification timestamp from data source
+     *
+     * {@internal implementing this method is optional.
+     *  Only implement it if modification times can be accessed faster than loading the complete cached content.}}
+     *
+     * @param  string          $id         unique cache content identifier
+     * @param  string          $name       template name
+     * @param  string          $cache_id   cache id
+     * @param  string          $compile_id compile id
+     * @return integer|boolean timestamp (epoch) the template was modified, or false if not found
+     */
+    protected function fetchTimestamp($id, $name, $cache_id, $compile_id)
+    {
+        return null;
+    }
+
+    /**
+     * Save content to cache
+     *
+     * @param  string       $id         unique cache content identifier
+     * @param  string       $name       template name
+     * @param  string       $cache_id   cache id
+     * @param  string       $compile_id compile id
+     * @param  integer|null $exp_time   seconds till expiration or null
+     * @param  string       $content    content to cache
+     * @return boolean      success
+     */
+    abstract protected function save($id, $name, $cache_id, $compile_id, $exp_time, $content);
+
+    /**
+     * Delete content from cache
+     *
+     * @param  string       $name       template name
+     * @param  string       $cache_id   cache id
+     * @param  string       $compile_id compile id
+     * @param  integer|null $exp_time   seconds till expiration time in seconds or null
+     * @return integer      number of deleted caches
+     */
+    abstract protected function delete($name, $cache_id, $compile_id, $exp_time);
+
+    /**
+     * populate Cached Object with meta data from Resource
+     *
+     * @param  Smarty_Template_Cached   $cached    cached object
+     * @param  Smarty_Internal_Template $_template template object
+     * @return void
+     */
+    public function populate(Smarty_Template_Cached $cached, Smarty_Internal_Template $_template)
+    {
+        $_cache_id = isset($cached->cache_id) ? preg_replace('![^\w\|]+!', '_', $cached->cache_id) : null;
+        $_compile_id = isset($cached->compile_id) ? preg_replace('![^\w\|]+!', '_', $cached->compile_id) : null;
+
+        $cached->filepath = sha1($cached->source->filepath . $_cache_id . $_compile_id);
+        $this->populateTimestamp($cached);
+    }
+
+    /**
+     * populate Cached Object with timestamp and exists from Resource
+     *
+     * @param  Smarty_Template_Cached $source cached object
+     * @return void
+     */
+    public function populateTimestamp(Smarty_Template_Cached $cached)
+    {
+        $mtime = $this->fetchTimestamp($cached->filepath, $cached->source->name, $cached->cache_id, $cached->compile_id);
+        if ($mtime !== null) {
+            $cached->timestamp = $mtime;
+            $cached->exists = !!$cached->timestamp;
+
+            return;
+        }
+        $timestamp = null;
+        $this->fetch($cached->filepath, $cached->source->name, $cached->cache_id, $cached->compile_id, $cached->content, $timestamp);
+        $cached->timestamp = isset($timestamp) ? $timestamp : false;
+        $cached->exists = !!$cached->timestamp;
+    }
+
+    /**
+     * Read the cached template and process the header
+     *
+     * @param  Smarty_Internal_Template $_template template object
+     * @param  Smarty_Template_Cached   $cached    cached object
+     * @return booelan                  true or false if the cached content does not exist
+     */
+    public function process(Smarty_Internal_Template $_template, Smarty_Template_Cached $cached=null)
+    {
+        if (!$cached) {
+            $cached = $_template->cached;
+        }
+        $content = $cached->content ? $cached->content : null;
+        $timestamp = $cached->timestamp ? $cached->timestamp : null;
+        if ($content === null || !$timestamp) {
+            $this->fetch(
+                $_template->cached->filepath,
+                $_template->source->name,
+                $_template->cache_id,
+                $_template->compile_id,
+                $content,
+                $timestamp
+            );
+        }
+        if (isset($content)) {
+            $_smarty_tpl = $_template;
+            eval("?>" . $content);
+
+            return true;
+        }
+
+        return false;
+    }
+
+    /**
+     * Write the rendered template output to cache
+     *
+     * @param  Smarty_Internal_Template $_template template object
+     * @param  string                   $content   content to cache
+     * @return boolean                  success
+     */
+    public function writeCachedContent(Smarty_Internal_Template $_template, $content)
+    {
+        return $this->save(
+            $_template->cached->filepath,
+            $_template->source->name,
+            $_template->cache_id,
+            $_template->compile_id,
+            $_template->properties['cache_lifetime'],
+            $content
+        );
+    }
+
+    /**
+     * Empty cache
+     *
+     * @param  Smarty  $smarty   Smarty object
+     * @param  integer $exp_time expiration time (number of seconds, not timestamp)
+     * @return integer number of cache files deleted
+     */
+    public function clearAll(Smarty $smarty, $exp_time=null)
+    {
+        $this->cache = array();
+
+        return $this->delete(null, null, null, $exp_time);
+    }
+
+    /**
+     * Empty cache for a specific template
+     *
+     * @param  Smarty  $smarty        Smarty object
+     * @param  string  $resource_name template name
+     * @param  string  $cache_id      cache id
+     * @param  string  $compile_id    compile id
+     * @param  integer $exp_time      expiration time (number of seconds, not timestamp)
+     * @return integer number of cache files deleted
+     */
+    public function clear(Smarty $smarty, $resource_name, $cache_id, $compile_id, $exp_time)
+    {
+        $this->cache = array();
+
+        return $this->delete($resource_name, $cache_id, $compile_id, $exp_time);
+    }
+
+    /**
+     * Check is cache is locked for this template
+     *
+     * @param  Smarty                 $smarty Smarty object
+     * @param  Smarty_Template_Cached $cached cached object
+     * @return booelan                true or false if cache is locked
+     */
+    public function hasLock(Smarty $smarty, Smarty_Template_Cached $cached)
+    {
+        $id = $cached->filepath;
+        $name = $cached->source->name . '.lock';
+
+        $mtime = $this->fetchTimestamp($id, $name, null, null);
+        if ($mtime === null) {
+            $this->fetch($id, $name, null, null, $content, $mtime);
+        }
+
+        return $mtime && time() - $mtime < $smarty->locking_timeout;
+    }
+
+    /**
+     * Lock cache for this template
+     *
+     * @param Smarty                 $smarty Smarty object
+     * @param Smarty_Template_Cached $cached cached object
+     */
+    public function acquireLock(Smarty $smarty, Smarty_Template_Cached $cached)
+    {
+        $cached->is_locked = true;
+
+        $id = $cached->filepath;
+        $name = $cached->source->name . '.lock';
+        $this->save($id, $name, null, null, $smarty->locking_timeout, '');
+    }
+
+    /**
+     * Unlock cache for this template
+     *
+     * @param Smarty                 $smarty Smarty object
+     * @param Smarty_Template_Cached $cached cached object
+     */
+    public function releaseLock(Smarty $smarty, Smarty_Template_Cached $cached)
+    {
+        $cached->is_locked = false;
+
+        $name = $cached->source->name . '.lock';
+        $this->delete($name, null, null, null);
+    }
+}

resources/templates/engine/smarty/sysplugins/smarty_cacheresource_keyvaluestore.php

@@ -0,0 +1,472 @@
+<?php
+/**
+ * Smarty Internal Plugin
+ *
+ * @package Smarty
+ * @subpackage Cacher
+ */
+
+/**
+ * Smarty Cache Handler Base for Key/Value Storage Implementations
+ *
+ * This class implements the functionality required to use simple key/value stores
+ * for hierarchical cache groups. key/value stores like memcache or APC do not support
+ * wildcards in keys, therefore a cache group cannot be cleared like "a|*" - which
+ * is no problem to filesystem and RDBMS implementations.
+ *
+ * This implementation is based on the concept of invalidation. While one specific cache
+ * can be identified and cleared, any range of caches cannot be identified. For this reason
+ * each level of the cache group hierarchy can have its own value in the store. These values
+ * are nothing but microtimes, telling us when a particular cache group was cleared for the
+ * last time. These keys are evaluated for every cache read to determine if the cache has
+ * been invalidated since it was created and should hence be treated as inexistent.
+ *
+ * Although deep hierarchies are possible, they are not recommended. Try to keep your
+ * cache groups as shallow as possible. Anything up 3-5 parents should be ok. So
+ * »a|b|c« is a good depth where »a|b|c|d|e|f|g|h|i|j|k« isn't. Try to join correlating
+ * cache groups: if your cache groups look somewhat like »a|b|$page|$items|$whatever«
+ * consider using »a|b|c|$page-$items-$whatever« instead.
+ *
+ * @package Smarty
+ * @subpackage Cacher
+ * @author Rodney Rehm
+ */
+abstract class Smarty_CacheResource_KeyValueStore extends Smarty_CacheResource
+{
+    /**
+     * cache for contents
+     * @var array
+     */
+    protected $contents = array();
+    /**
+     * cache for timestamps
+     * @var array
+     */
+    protected $timestamps = array();
+
+    /**
+     * populate Cached Object with meta data from Resource
+     *
+     * @param  Smarty_Template_Cached   $cached    cached object
+     * @param  Smarty_Internal_Template $_template template object
+     * @return void
+     */
+    public function populate(Smarty_Template_Cached $cached, Smarty_Internal_Template $_template)
+    {
+        $cached->filepath = $_template->source->uid
+                . '#' . $this->sanitize($cached->source->name)
+                . '#' . $this->sanitize($cached->cache_id)
+                . '#' . $this->sanitize($cached->compile_id);
+
+        $this->populateTimestamp($cached);
+    }
+
+    /**
+     * populate Cached Object with timestamp and exists from Resource
+     *
+     * @param  Smarty_Template_Cached $cached cached object
+     * @return void
+     */
+    public function populateTimestamp(Smarty_Template_Cached $cached)
+    {
+        if (!$this->fetch($cached->filepath, $cached->source->name, $cached->cache_id, $cached->compile_id, $content, $timestamp, $cached->source->uid)) {
+            return;
+        }
+        $cached->content = $content;
+        $cached->timestamp = (int) $timestamp;
+        $cached->exists = $cached->timestamp;
+    }
+
+    /**
+     * Read the cached template and process the header
+     *
+     * @param  Smarty_Internal_Template $_template template object
+     * @param  Smarty_Template_Cached   $cached    cached object
+     * @return booelan                  true or false if the cached content does not exist
+     */
+    public function process(Smarty_Internal_Template $_template, Smarty_Template_Cached $cached=null)
+    {
+        if (!$cached) {
+            $cached = $_template->cached;
+        }
+        $content = $cached->content ? $cached->content : null;
+        $timestamp = $cached->timestamp ? $cached->timestamp : null;
+        if ($content === null || !$timestamp) {
+            if (!$this->fetch($_template->cached->filepath, $_template->source->name, $_template->cache_id, $_template->compile_id, $content, $timestamp, $_template->source->uid)) {
+                return false;
+            }
+        }
+        if (isset($content)) {
+            $_smarty_tpl = $_template;
+            eval("?>" . $content);
+
+            return true;
+        }
+
+        return false;
+    }
+
+    /**
+     * Write the rendered template output to cache
+     *
+     * @param  Smarty_Internal_Template $_template template object
+     * @param  string                   $content   content to cache
+     * @return boolean                  success
+     */
+    public function writeCachedContent(Smarty_Internal_Template $_template, $content)
+    {
+        $this->addMetaTimestamp($content);
+
+        return $this->write(array($_template->cached->filepath => $content), $_template->properties['cache_lifetime']);
+    }
+
+    /**
+     * Empty cache
+     *
+     * {@internal the $exp_time argument is ignored altogether }}
+     *
+     * @param  Smarty  $smarty   Smarty object
+     * @param  integer $exp_time expiration time [being ignored]
+     * @return integer number of cache files deleted [always -1]
+     * @uses purge() to clear the whole store
+     * @uses invalidate() to mark everything outdated if purge() is inapplicable
+     */
+    public function clearAll(Smarty $smarty, $exp_time=null)
+    {
+        if (!$this->purge()) {
+            $this->invalidate(null);
+        }
+
+        return -1;
+    }
+
+    /**
+     * Empty cache for a specific template
+     *
+     * {@internal the $exp_time argument is ignored altogether}}
+     *
+     * @param  Smarty  $smarty        Smarty object
+     * @param  string  $resource_name template name
+     * @param  string  $cache_id      cache id
+     * @param  string  $compile_id    compile id
+     * @param  integer $exp_time      expiration time [being ignored]
+     * @return integer number of cache files deleted [always -1]
+     * @uses buildCachedFilepath() to generate the CacheID
+     * @uses invalidate() to mark CacheIDs parent chain as outdated
+     * @uses delete() to remove CacheID from cache
+     */
+    public function clear(Smarty $smarty, $resource_name, $cache_id, $compile_id, $exp_time)
+    {
+        $uid = $this->getTemplateUid($smarty, $resource_name, $cache_id, $compile_id);
+        $cid = $uid . '#' . $this->sanitize($resource_name) . '#' . $this->sanitize($cache_id) . '#' . $this->sanitize($compile_id);
+        $this->delete(array($cid));
+        $this->invalidate($cid, $resource_name, $cache_id, $compile_id, $uid);
+
+        return -1;
+    }
+    /**
+     * Get template's unique ID
+     *
+     * @param  Smarty $smarty        Smarty object
+     * @param  string $resource_name template name
+     * @param  string $cache_id      cache id
+     * @param  string $compile_id    compile id
+     * @return string filepath of cache file
+     */
+    protected function getTemplateUid(Smarty $smarty, $resource_name, $cache_id, $compile_id)
+    {
+        $uid = '';
+        if (isset($resource_name)) {
+            $tpl = new $smarty->template_class($resource_name, $smarty);
+            if ($tpl->source->exists) {
+                $uid = $tpl->source->uid;
+            }
+
+            // remove from template cache
+            if ($smarty->allow_ambiguous_resources) {
+                $_templateId = $tpl->source->unique_resource . $tpl->cache_id . $tpl->compile_id;
+            } else {
+                $_templateId = $smarty->joined_template_dir . '#' . $resource_name . $tpl->cache_id . $tpl->compile_id;
+            }
+            if (isset($_templateId[150])) {
+                $_templateId = sha1($_templateId);
+            }
+            unset($smarty->template_objects[$_templateId]);
+        }
+
+        return $uid;
+    }
+
+    /**
+     * Sanitize CacheID components
+     *
+     * @param  string $string CacheID component to sanitize
+     * @return string sanitized CacheID component
+     */
+    protected function sanitize($string)
+    {
+        // some poeple smoke bad weed
+        $string = trim($string, '|');
+        if (!$string) {
+            return null;
+        }
+
+        return preg_replace('#[^\w\|]+#S', '_', $string);
+    }
+
+    /**
+     * Fetch and prepare a cache object.
+     *
+     * @param  string  $cid           CacheID to fetch
+     * @param  string  $resource_name template name
+     * @param  string  $cache_id      cache id
+     * @param  string  $compile_id    compile id
+     * @param  string  $content       cached content
+     * @param  integer &$timestamp    cached timestamp (epoch)
+     * @param  string  $resource_uid  resource's uid
+     * @return boolean success
+     */
+    protected function fetch($cid, $resource_name = null, $cache_id = null, $compile_id = null, &$content = null, &$timestamp = null, $resource_uid = null)
+    {
+        $t = $this->read(array($cid));
+        $content = !empty($t[$cid]) ? $t[$cid] : null;
+        $timestamp = null;
+
+        if ($content && ($timestamp = $this->getMetaTimestamp($content))) {
+            $invalidated = $this->getLatestInvalidationTimestamp($cid, $resource_name, $cache_id, $compile_id, $resource_uid);
+            if ($invalidated > $timestamp) {
+                $timestamp = null;
+                $content = null;
+            }
+        }
+
+        return !!$content;
+    }
+
+    /**
+     * Add current microtime to the beginning of $cache_content
+     *
+     * {@internal the header uses 8 Bytes, the first 4 Bytes are the seconds, the second 4 Bytes are the microseconds}}
+     *
+     * @param string &$content the content to be cached
+     */
+    protected function addMetaTimestamp(&$content)
+    {
+        $mt = explode(" ", microtime());
+        $ts = pack("NN", $mt[1], (int) ($mt[0] * 100000000));
+        $content = $ts . $content;
+    }
+
+    /**
+     * Extract the timestamp the $content was cached
+     *
+     * @param  string &$content the cached content
+     * @return float  the microtime the content was cached
+     */
+    protected function getMetaTimestamp(&$content)
+    {
+        $s = unpack("N", substr($content, 0, 4));
+        $m = unpack("N", substr($content, 4, 4));
+        $content = substr($content, 8);
+
+        return $s[1] + ($m[1] / 100000000);
+    }
+
+    /**
+     * Invalidate CacheID
+     *
+     * @param  string $cid           CacheID
+     * @param  string $resource_name template name
+     * @param  string $cache_id      cache id
+     * @param  string $compile_id    compile id
+     * @param  string $resource_uid  source's uid
+     * @return void
+     */
+    protected function invalidate($cid = null, $resource_name = null, $cache_id = null, $compile_id = null, $resource_uid = null)
+    {
+        $now = microtime(true);
+        $key = null;
+        // invalidate everything
+        if (!$resource_name && !$cache_id && !$compile_id) {
+            $key = 'IVK#ALL';
+        }
+        // invalidate all caches by template
+        else if ($resource_name && !$cache_id && !$compile_id) {
+            $key = 'IVK#TEMPLATE#' . $resource_uid . '#' . $this->sanitize($resource_name);
+        }
+        // invalidate all caches by cache group
+        else if (!$resource_name && $cache_id && !$compile_id) {
+            $key = 'IVK#CACHE#' . $this->sanitize($cache_id);
+        }
+        // invalidate all caches by compile id
+        else if (!$resource_name && !$cache_id && $compile_id) {
+            $key = 'IVK#COMPILE#' . $this->sanitize($compile_id);
+        }
+        // invalidate by combination
+        else {
+            $key = 'IVK#CID#' . $cid;
+        }
+        $this->write(array($key => $now));
+    }
+
+    /**
+     * Determine the latest timestamp known to the invalidation chain
+     *
+     * @param  string $cid           CacheID to determine latest invalidation timestamp of
+     * @param  string $resource_name template name
+     * @param  string $cache_id      cache id
+     * @param  string $compile_id    compile id
+     * @param  string $resource_uid  source's filepath
+     * @return float  the microtime the CacheID was invalidated
+     */
+    protected function getLatestInvalidationTimestamp($cid, $resource_name = null, $cache_id = null, $compile_id = null, $resource_uid = null)
+    {
+        // abort if there is no CacheID
+        if (false && !$cid) {
+            return 0;
+        }
+        // abort if there are no InvalidationKeys to check
+        if (!($_cid = $this->listInvalidationKeys($cid, $resource_name, $cache_id, $compile_id, $resource_uid))) {
+            return 0;
+        }
+
+        // there are no InValidationKeys
+        if (!($values = $this->read($_cid))) {
+            return 0;
+        }
+        // make sure we're dealing with floats
+        $values = array_map('floatval', $values);
+
+        return max($values);
+    }
+
+    /**
+     * Translate a CacheID into the list of applicable InvalidationKeys.
+     *
+     * Splits "some|chain|into|an|array" into array( '#clearAll#', 'some', 'some|chain', 'some|chain|into', ... )
+     *
+     * @param  string $cid           CacheID to translate
+     * @param  string $resource_name template name
+     * @param  string $cache_id      cache id
+     * @param  string $compile_id    compile id
+     * @param  string $resource_uid  source's filepath
+     * @return array  list of InvalidationKeys
+     * @uses $invalidationKeyPrefix to prepend to each InvalidationKey
+     */
+    protected function listInvalidationKeys($cid, $resource_name = null, $cache_id = null, $compile_id = null, $resource_uid = null)
+    {
+        $t = array('IVK#ALL');
+        $_name = $_compile = '#';
+        if ($resource_name) {
+            $_name .= $resource_uid . '#' . $this->sanitize($resource_name);
+            $t[] = 'IVK#TEMPLATE' . $_name;
+        }
+        if ($compile_id) {
+            $_compile .= $this->sanitize($compile_id);
+            $t[] = 'IVK#COMPILE' . $_compile;
+        }
+        $_name .= '#';
+        // some poeple smoke bad weed
+        $cid = trim($cache_id, '|');
+        if (!$cid) {
+            return $t;
+        }
+        $i = 0;
+        while (true) {
+            // determine next delimiter position
+            $i = strpos($cid, '|', $i);
+            // add complete CacheID if there are no more delimiters
+            if ($i === false) {
+                $t[] = 'IVK#CACHE#' . $cid;
+                $t[] = 'IVK#CID' . $_name . $cid . $_compile;
+                $t[] = 'IVK#CID' . $_name . $_compile;
+                break;
+            }
+            $part = substr($cid, 0, $i);
+            // add slice to list
+            $t[] = 'IVK#CACHE#' . $part;
+            $t[] = 'IVK#CID' . $_name . $part . $_compile;
+            // skip past delimiter position
+            $i++;
+        }
+
+        return $t;
+    }
+
+    /**
+     * Check is cache is locked for this template
+     *
+     * @param  Smarty                 $smarty Smarty object
+     * @param  Smarty_Template_Cached $cached cached object
+     * @return booelan                true or false if cache is locked
+     */
+    public function hasLock(Smarty $smarty, Smarty_Template_Cached $cached)
+    {
+        $key = 'LOCK#' . $cached->filepath;
+        $data = $this->read(array($key));
+
+        return $data && time() - $data[$key] < $smarty->locking_timeout;
+    }
+
+    /**
+     * Lock cache for this template
+     *
+     * @param Smarty                 $smarty Smarty object
+     * @param Smarty_Template_Cached $cached cached object
+     */
+    public function acquireLock(Smarty $smarty, Smarty_Template_Cached $cached)
+    {
+        $cached->is_locked = true;
+        $key = 'LOCK#' . $cached->filepath;
+        $this->write(array($key => time()), $smarty->locking_timeout);
+    }
+
+    /**
+     * Unlock cache for this template
+     *
+     * @param Smarty                 $smarty Smarty object
+     * @param Smarty_Template_Cached $cached cached object
+     */
+    public function releaseLock(Smarty $smarty, Smarty_Template_Cached $cached)
+    {
+        $cached->is_locked = false;
+        $key = 'LOCK#' . $cached->filepath;
+        $this->delete(array($key));
+    }
+
+    /**
+     * Read values for a set of keys from cache
+     *
+     * @param  array $keys list of keys to fetch
+     * @return array list of values with the given keys used as indexes
+     */
+    abstract protected function read(array $keys);
+
+    /**
+     * Save values for a set of keys to cache
+     *
+     * @param  array   $keys   list of values to save
+     * @param  int     $expire expiration time
+     * @return boolean true on success, false on failure
+     */
+    abstract protected function write(array $keys, $expire=null);
+
+    /**
+     * Remove values from cache
+     *
+     * @param  array   $keys list of keys to delete
+     * @return boolean true on success, false on failure
+     */
+    abstract protected function delete(array $keys);
+
+    /**
+     * Remove *all* values from cache
+     *
+     * @return boolean true on success, false on failure
+     */
+    protected function purge()
+    {
+        return false;
+    }
+
+}

resources/templates/engine/smarty/sysplugins/smarty_config_source.php

@@ -0,0 +1,94 @@
+<?php
+/**
+ * Smarty Internal Plugin
+ *
+ * @package Smarty
+ * @subpackage TemplateResources
+ */
+
+/**
+ * Smarty Resource Data Object
+ *
+ * Meta Data Container for Config Files
+ *
+ * @package Smarty
+ * @subpackage TemplateResources
+ * @author Rodney Rehm
+ *
+ * @property string $content
+ * @property int    $timestamp
+ * @property bool   $exists
+ */
+class Smarty_Config_Source extends Smarty_Template_Source
+{
+    /**
+     * create Config Object container
+     *
+     * @param Smarty_Resource $handler         Resource Handler this source object communicates with
+     * @param Smarty          $smarty          Smarty instance this source object belongs to
+     * @param string          $resource        full config_resource
+     * @param string          $type            type of resource
+     * @param string          $name            resource name
+     * @param string          $unique_resource unqiue resource name
+     */
+    public function __construct(Smarty_Resource $handler, Smarty $smarty, $resource, $type, $name, $unique_resource)
+    {
+        $this->handler = $handler; // Note: prone to circular references
+
+        // Note: these may be ->config_compiler_class etc in the future
+        //$this->config_compiler_class = $handler->config_compiler_class;
+        //$this->config_lexer_class = $handler->config_lexer_class;
+        //$this->config_parser_class = $handler->config_parser_class;
+
+        $this->smarty = $smarty;
+        $this->resource = $resource;
+        $this->type = $type;
+        $this->name = $name;
+        $this->unique_resource = $unique_resource;
+    }
+
+    /**
+     * <<magic>> Generic setter.
+     *
+     * @param  string          $property_name valid: content, timestamp, exists
+     * @param  mixed           $value         newly assigned value (not check for correct type)
+     * @throws SmartyException when the given property name is not valid
+     */
+    public function __set($property_name, $value)
+    {
+        switch ($property_name) {
+            case 'content':
+            case 'timestamp':
+            case 'exists':
+                $this->$property_name = $value;
+                break;
+
+            default:
+                throw new SmartyException("invalid config property '$property_name'.");
+        }
+    }
+
+    /**
+     * <<magic>> Generic getter.
+     *
+     * @param  string          $property_name valid: content, timestamp, exists
+     * @throws SmartyException when the given property name is not valid
+     */
+    public function __get($property_name)
+    {
+        switch ($property_name) {
+            case 'timestamp':
+            case 'exists':
+                $this->handler->populateTimestamp($this);
+
+                return $this->$property_name;
+
+            case 'content':
+                return $this->content = $this->handler->getContent($this);
+
+            default:
+                throw new SmartyException("config property '$property_name' does not exist.");
+        }
+    }
+
+}

resources/templates/engine/smarty/sysplugins/smarty_internal_cacheresource_file.php

@@ -0,0 +1,277 @@
+<?php
+    /**
+    * Smarty Internal Plugin CacheResource File
+    *
+    * @package Smarty
+    * @subpackage Cacher
+    * @author Uwe Tews
+    * @author Rodney Rehm
+    */
+
+    /**
+    * This class does contain all necessary methods for the HTML cache on file system
+    *
+    * Implements the file system as resource for the HTML cache Version ussing nocache inserts.
+    *
+    * @package Smarty
+    * @subpackage Cacher
+    */
+    class Smarty_Internal_CacheResource_File extends Smarty_CacheResource
+    {
+        /**
+        * populate Cached Object with meta data from Resource
+        *
+        * @param Smarty_Template_Cached   $cached    cached object
+        * @param Smarty_Internal_Template $_template template object
+        * @return void
+        */
+        public function populate(Smarty_Template_Cached $cached, Smarty_Internal_Template $_template)
+        {
+            $_source_file_path = str_replace(':', '.', $_template->source->filepath);
+            $_cache_id = isset($_template->cache_id) ? preg_replace('![^\w\|]+!', '_', $_template->cache_id) : null;
+            $_compile_id = isset($_template->compile_id) ? preg_replace('![^\w\|]+!', '_', $_template->compile_id) : null;
+            $_filepath = $_template->source->uid;
+            // if use_sub_dirs, break file into directories
+            if ($_template->smarty->use_sub_dirs) {
+                $_filepath = substr($_filepath, 0, 2) . DS
+                . substr($_filepath, 2, 2) . DS
+                . substr($_filepath, 4, 2) . DS
+                . $_filepath;
+            }
+            $_compile_dir_sep = $_template->smarty->use_sub_dirs ? DS : '^';
+            if (isset($_cache_id)) {
+                $_cache_id = str_replace('|', $_compile_dir_sep, $_cache_id) . $_compile_dir_sep;
+            } else {
+                $_cache_id = '';
+            }
+            if (isset($_compile_id)) {
+                $_compile_id = $_compile_id . $_compile_dir_sep;
+            } else {
+                $_compile_id = '';
+            }
+            $_cache_dir = $_template->smarty->getCacheDir();
+            if ($_template->smarty->cache_locking) {
+                // create locking file name
+                // relative file name?
+                if (!preg_match('/^([\/\\\\]|[a-zA-Z]:[\/\\\\])/', $_cache_dir)) {
+                    $_lock_dir = rtrim(getcwd(), '/\\') . DS . $_cache_dir;
+                } else {
+                    $_lock_dir = $_cache_dir;
+                }
+                $cached->lock_id = $_lock_dir.sha1($_cache_id.$_compile_id.$_template->source->uid).'.lock';
+            }
+            $cached->filepath = $_cache_dir . $_cache_id . $_compile_id . $_filepath . '.' . basename($_source_file_path) . '.php';
+            $cached->timestamp = @filemtime($cached->filepath);
+            $cached->exists = !!$cached->timestamp;
+        }
+
+        /**
+        * populate Cached Object with timestamp and exists from Resource
+        *
+        * @param Smarty_Template_Cached $cached cached object
+        * @return void
+        */
+        public function populateTimestamp(Smarty_Template_Cached $cached)
+        {
+            $cached->timestamp = @filemtime($cached->filepath);
+            $cached->exists = !!$cached->timestamp;
+        }
+
+        /**
+        * Read the cached template and process its header
+        *
+        * @param Smarty_Internal_Template $_template template object
+        * @param Smarty_Template_Cached $cached cached object
+        * @return booelan true or false if the cached content does not exist
+        */
+        public function process(Smarty_Internal_Template $_template, Smarty_Template_Cached $cached=null)
+        {
+            $_smarty_tpl = $_template;
+
+            return @include $_template->cached->filepath;
+        }
+
+        /**
+        * Write the rendered template output to cache
+        *
+        * @param Smarty_Internal_Template $_template template object
+        * @param string                   $content   content to cache
+        * @return boolean success
+        */
+        public function writeCachedContent(Smarty_Internal_Template $_template, $content)
+        {
+            if (Smarty_Internal_Write_File::writeFile($_template->cached->filepath, $content, $_template->smarty) === true) {
+                $_template->cached->timestamp = @filemtime($_template->cached->filepath);
+                $_template->cached->exists = !!$_template->cached->timestamp;
+                if ($_template->cached->exists) {
+                    return true;
+                }
+            }
+
+            return false;
+        }
+
+        /**
+        * Empty cache
+        *
+        * @param Smarty_Internal_Template $_template template object
+        * @param integer                  $exp_time  expiration time (number of seconds, not timestamp)
+        * @return integer number of cache files deleted
+        */
+        public function clearAll(Smarty $smarty, $exp_time = null)
+        {
+            return $this->clear($smarty, null, null, null, $exp_time);
+        }
+
+        /**
+        * Empty cache for a specific template
+        *
+        * @param Smarty  $_template     template object
+        * @param string  $resource_name template name
+        * @param string  $cache_id      cache id
+        * @param string  $compile_id    compile id
+        * @param integer $exp_time      expiration time (number of seconds, not timestamp)
+        * @return integer number of cache files deleted
+        */
+        public function clear(Smarty $smarty, $resource_name, $cache_id, $compile_id, $exp_time)
+        {
+            $_cache_id = isset($cache_id) ? preg_replace('![^\w\|]+!', '_', $cache_id) : null;
+            $_compile_id = isset($compile_id) ? preg_replace('![^\w\|]+!', '_', $compile_id) : null;
+            $_dir_sep = $smarty->use_sub_dirs ? '/' : '^';
+            $_compile_id_offset = $smarty->use_sub_dirs ? 3 : 0;
+            $_dir = $smarty->getCacheDir();
+            $_dir_length = strlen($_dir);
+            if (isset($_cache_id)) {
+                $_cache_id_parts = explode('|', $_cache_id);
+                $_cache_id_parts_count = count($_cache_id_parts);
+                if ($smarty->use_sub_dirs) {
+                    foreach ($_cache_id_parts as $id_part) {
+                        $_dir .= $id_part . DS;
+                    }
+                }
+            }
+            if (isset($resource_name)) {
+                $_save_stat = $smarty->caching;
+                $smarty->caching = true;
+                $tpl = new $smarty->template_class($resource_name, $smarty);
+                $smarty->caching = $_save_stat;
+
+                // remove from template cache
+                $tpl->source; // have the template registered before unset()
+                if ($smarty->allow_ambiguous_resources) {
+                    $_templateId = $tpl->source->unique_resource . $tpl->cache_id . $tpl->compile_id;
+                } else {
+                    $_templateId = $smarty->joined_template_dir . '#' . $resource_name . $tpl->cache_id . $tpl->compile_id;
+                }
+                if (isset($_templateId[150])) {
+                    $_templateId = sha1($_templateId);
+                }
+                unset($smarty->template_objects[$_templateId]);
+
+                if ($tpl->source->exists) {
+                    $_resourcename_parts = basename(str_replace('^', '/', $tpl->cached->filepath));
+                } else {
+                    return 0;
+                }
+            }
+            $_count = 0;
+            $_time = time();
+            if (file_exists($_dir)) {
+                $_cacheDirs = new RecursiveDirectoryIterator($_dir);
+                $_cache = new RecursiveIteratorIterator($_cacheDirs, RecursiveIteratorIterator::CHILD_FIRST);
+                foreach ($_cache as $_file) {
+                    if (substr(basename($_file->getPathname()),0,1) == '.' || strpos($_file, '.svn') !== false) continue;
+                    // directory ?
+                    if ($_file->isDir()) {
+                        if (!$_cache->isDot()) {
+                            // delete folder if empty
+                            @rmdir($_file->getPathname());
+                        }
+                    } else {
+                        $_parts = explode($_dir_sep, str_replace('\\', '/', substr((string) $_file, $_dir_length)));
+                        $_parts_count = count($_parts);
+                        // check name
+                        if (isset($resource_name)) {
+                            if ($_parts[$_parts_count-1] != $_resourcename_parts) {
+                                continue;
+                            }
+                        }
+                        // check compile id
+                        if (isset($_compile_id) && (!isset($_parts[$_parts_count-2 - $_compile_id_offset]) || $_parts[$_parts_count-2 - $_compile_id_offset] != $_compile_id)) {
+                            continue;
+                        }
+                        // check cache id
+                        if (isset($_cache_id)) {
+                            // count of cache id parts
+                            $_parts_count = (isset($_compile_id)) ? $_parts_count - 2 - $_compile_id_offset : $_parts_count - 1 - $_compile_id_offset;
+                            if ($_parts_count < $_cache_id_parts_count) {
+                                continue;
+                            }
+                            for ($i = 0; $i < $_cache_id_parts_count; $i++) {
+                                if ($_parts[$i] != $_cache_id_parts[$i]) continue 2;
+                            }
+                        }
+                        // expired ?
+                        if (isset($exp_time)) {
+                            if ($exp_time < 0) {
+                                preg_match('#\'cache_lifetime\' =>\s*(\d*)#', file_get_contents($_file), $match);
+                                if ($_time < (@filemtime($_file) + $match[1])) {
+                                    continue;
+                                }
+                            } else {
+                                if ($_time - @filemtime($_file) < $exp_time) {
+                                    continue;
+                                }
+                            }
+                        }
+                        $_count += @unlink((string) $_file) ? 1 : 0;
+                    }
+                }
+            }
+
+            return $_count;
+        }
+
+        /**
+        * Check is cache is locked for this template
+        *
+        * @param Smarty $smarty Smarty object
+        * @param Smarty_Template_Cached $cached cached object
+        * @return booelan true or false if cache is locked
+        */
+        public function hasLock(Smarty $smarty, Smarty_Template_Cached $cached)
+        {
+            if (version_compare(PHP_VERSION, '5.3.0', '>=')) {
+                clearstatcache(true, $cached->lock_id);
+            } else {
+                clearstatcache();
+            }
+            $t = @filemtime($cached->lock_id);
+
+            return $t && (time() - $t < $smarty->locking_timeout);
+        }
+
+        /**
+        * Lock cache for this template
+        *
+        * @param Smarty $smarty Smarty object
+        * @param Smarty_Template_Cached $cached cached object
+        */
+        public function acquireLock(Smarty $smarty, Smarty_Template_Cached $cached)
+        {
+            $cached->is_locked = true;
+            touch($cached->lock_id);
+        }
+
+        /**
+        * Unlock cache for this template
+        *
+        * @param Smarty $smarty Smarty object
+        * @param Smarty_Template_Cached $cached cached object
+        */
+        public function releaseLock(Smarty $smarty, Smarty_Template_Cached $cached)
+        {
+            $cached->is_locked = false;
+            @unlink($cached->lock_id);
+        }
+    }

resources/templates/engine/smarty/sysplugins/smarty_internal_compile_append.php

@@ -0,0 +1,51 @@
+<?php
+/**
+ * Smarty Internal Plugin Compile Append
+ *
+ * Compiles the {append} tag
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ * @author Uwe Tews
+ */
+
+/**
+ * Smarty Internal Plugin Compile Append Class
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ */
+class Smarty_Internal_Compile_Append extends Smarty_Internal_Compile_Assign
+{
+    /**
+     * Compiles code for the {append} tag
+     *
+     * @param  array  $args      array with attributes from parser
+     * @param  object $compiler  compiler object
+     * @param  array  $parameter array with compilation parameter
+     * @return string compiled code
+     */
+    public function compile($args, $compiler, $parameter)
+    {
+        // the following must be assigned at runtime because it will be overwritten in parent class
+        $this->required_attributes = array('var', 'value');
+        $this->shorttag_order = array('var', 'value');
+        $this->optional_attributes = array('scope', 'index');
+        // check and get attributes
+        $_attr = $this->getAttributes($compiler, $args);
+        // map to compile assign attributes
+        if (isset($_attr['index'])) {
+            $_params['smarty_internal_index'] = '[' . $_attr['index'] . ']';
+            unset($_attr['index']);
+        } else {
+            $_params['smarty_internal_index'] = '[]';
+        }
+        $_new_attr = array();
+        foreach ($_attr as $key => $value) {
+            $_new_attr[] = array($key => $value);
+        }
+        // call compile assign
+        return parent::compile($_new_attr, $compiler, $_params);
+    }
+
+}

resources/templates/engine/smarty/sysplugins/smarty_internal_compile_assign.php

@@ -0,0 +1,87 @@
+<?php
+/**
+ * Smarty Internal Plugin Compile Assign
+ *
+ * Compiles the {assign} tag
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ * @author Uwe Tews
+ */
+
+/**
+ * Smarty Internal Plugin Compile Assign Class
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ */
+class Smarty_Internal_Compile_Assign extends Smarty_Internal_CompileBase
+{
+    /**
+     * Compiles code for the {assign} tag
+     *
+     * @param  array  $args      array with attributes from parser
+     * @param  object $compiler  compiler object
+     * @param  array  $parameter array with compilation parameter
+     * @return string compiled code
+     */
+    public function compile($args, $compiler, $parameter)
+    {
+        // the following must be assigned at runtime because it will be overwritten in Smarty_Internal_Compile_Append
+        $this->required_attributes = array('var', 'value');
+        $this->shorttag_order = array('var', 'value');
+        $this->optional_attributes = array('scope');
+        $_nocache = 'null';
+        $_scope = Smarty::SCOPE_LOCAL;
+        // check and get attributes
+        $_attr = $this->getAttributes($compiler, $args);
+        // nocache ?
+        if ($compiler->tag_nocache || $compiler->nocache) {
+            $_nocache = 'true';
+            // create nocache var to make it know for further compiling
+            if (isset($compiler->template->tpl_vars[trim($_attr['var'], "'")])) {
+                $compiler->template->tpl_vars[trim($_attr['var'], "'")]->nocache = true;
+            } else {
+                $compiler->template->tpl_vars[trim($_attr['var'], "'")] = new Smarty_variable(null, true);
+            }
+        }
+        // scope setup
+        if (isset($_attr['scope'])) {
+            $_attr['scope'] = trim($_attr['scope'], "'\"");
+            if ($_attr['scope'] == 'parent') {
+                $_scope = Smarty::SCOPE_PARENT;
+            } elseif ($_attr['scope'] == 'root') {
+                $_scope = Smarty::SCOPE_ROOT;
+            } elseif ($_attr['scope'] == 'global') {
+                $_scope = Smarty::SCOPE_GLOBAL;
+            } else {
+                $compiler->trigger_template_error('illegal value for "scope" attribute', $compiler->lex->taglineno);
+            }
+        }
+        // compiled output
+        if (isset($parameter['smarty_internal_index'])) {
+            $output = "<?php \$_smarty_tpl->createLocalArrayVariable($_attr[var], $_nocache, $_scope);\n\$_smarty_tpl->tpl_vars[$_attr[var]]->value$parameter[smarty_internal_index] = $_attr[value];";
+        } else {
+            // implement Smarty2's behaviour of variables assigned by reference
+            if ($compiler->template->smarty instanceof SmartyBC) {
+                $output = "<?php if (isset(\$_smarty_tpl->tpl_vars[$_attr[var]])) {\$_smarty_tpl->tpl_vars[$_attr[var]] = clone \$_smarty_tpl->tpl_vars[$_attr[var]];";
+                $output .= "\n\$_smarty_tpl->tpl_vars[$_attr[var]]->value = $_attr[value]; \$_smarty_tpl->tpl_vars[$_attr[var]]->nocache = $_nocache; \$_smarty_tpl->tpl_vars[$_attr[var]]->scope = $_scope;";
+                $output .= "\n} else \$_smarty_tpl->tpl_vars[$_attr[var]] = new Smarty_variable($_attr[value], $_nocache, $_scope);";
+            } else {
+                $output = "<?php \$_smarty_tpl->tpl_vars[$_attr[var]] = new Smarty_variable($_attr[value], $_nocache, $_scope);";
+            }
+        }
+        if ($_scope == Smarty::SCOPE_PARENT) {
+            $output .= "\nif (\$_smarty_tpl->parent != null) \$_smarty_tpl->parent->tpl_vars[$_attr[var]] = clone \$_smarty_tpl->tpl_vars[$_attr[var]];";
+        } elseif ($_scope == Smarty::SCOPE_ROOT || $_scope == Smarty::SCOPE_GLOBAL) {
+            $output .= "\n\$_ptr = \$_smarty_tpl->parent; while (\$_ptr != null) {\$_ptr->tpl_vars[$_attr[var]] = clone \$_smarty_tpl->tpl_vars[$_attr[var]]; \$_ptr = \$_ptr->parent; }";
+        }
+        if ($_scope == Smarty::SCOPE_GLOBAL) {
+            $output .= "\nSmarty::\$global_tpl_vars[$_attr[var]] = clone \$_smarty_tpl->tpl_vars[$_attr[var]];";
+        }
+        $output .= '?>';
+
+        return $output;
+    }
+
+}

resources/templates/engine/smarty/sysplugins/smarty_internal_compile_block.php

@@ -0,0 +1,428 @@
+<?php
+
+/**
+ * Smarty Internal Plugin Compile Block
+ *
+ * Compiles the {block}{/block} tags
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ * @author Uwe Tews
+ */
+
+/**
+ * Smarty Internal Plugin Compile Block Class
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ */
+class Smarty_Internal_Compile_Block extends Smarty_Internal_CompileBase
+{
+
+    const parent = '____SMARTY_BLOCK_PARENT____';
+    /**
+     * Attribute definition: Overwrites base class.
+     *
+     * @var array
+     * @see Smarty_Internal_CompileBase
+     */
+    public $required_attributes = array('name');
+
+    /**
+     * Attribute definition: Overwrites base class.
+     *
+     * @var array
+     * @see Smarty_Internal_CompileBase
+     */
+    public $shorttag_order = array('name');
+
+    /**
+     * Attribute definition: Overwrites base class.
+     *
+     * @var array
+     * @see Smarty_Internal_CompileBase
+     */
+    public $option_flags = array('hide', 'append', 'prepend', 'nocache');
+
+    /**
+     * Attribute definition: Overwrites base class.
+     *
+     * @var array
+     * @see Smarty_Internal_CompileBase
+     */
+    public $optional_attributes = array('internal_file', 'internal_uid', 'internal_line');
+    /**
+     * nested child block names
+     *
+     * @var array
+     */
+    public static $nested_block_names = array();
+
+    /**
+     * child block source buffer
+     *
+     * @var array
+     */
+    public static $block_data = array();
+
+    /**
+     * Compiles code for the {block} tag
+     *
+     * @param array $args     array with attributes from parser
+     * @param object $compiler compiler object
+     * @return boolean true
+     */
+    public function compile($args, $compiler)
+    {
+        // check and get attributes
+        $_attr = $this->getAttributes($compiler, $args);
+        $_name = trim($_attr['name'], "\"'");
+
+        // check if we process an inheritance child template
+        if ($compiler->inheritance_child) {
+            array_unshift(self::$nested_block_names, $_name);
+            $this->template->block_data[$_name]['source'] = '';
+            // build {block} for child block
+            self::$block_data[$_name]['source'] =
+                "{$compiler->smarty->left_delimiter}private_child_block name={$_attr['name']} file='{$compiler->template->source->filepath}'" .
+                " uid='{$compiler->template->source->uid}' line={$compiler->lex->line}";
+            if ($_attr['nocache']) {
+                self::$block_data[$_name]['source'] .= ' nocache';
+            }
+            self::$block_data[$_name]['source'] .= $compiler->smarty->right_delimiter;
+
+            $save = array($_attr, $compiler->inheritance);
+            $this->openTag($compiler, 'block', $save);
+            // set flag for {block} tag
+            $compiler->inheritance = true;
+            $compiler->lex->yypushstate(Smarty_Internal_Templatelexer::CHILDBLOCK);
+            $compiler->has_code = false;
+            return;
+        }
+        // must merge includes
+        if ($_attr['nocache'] == true) {
+            $compiler->tag_nocache = true;
+        }
+        $save = array($_attr, $compiler->inheritance, $compiler->parser->current_buffer, $compiler->nocache);
+        $this->openTag($compiler, 'block', $save);
+        $compiler->inheritance = true;
+        $compiler->nocache = $compiler->nocache | $compiler->tag_nocache;
+
+        $compiler->parser->current_buffer = new _smarty_template_buffer($compiler->parser);
+        $compiler->has_code = false;
+
+        return true;
+    }
+
+
+    /**
+     * Compile saved child block source
+     *
+     * @param object $compiler  compiler object
+     * @param string $_name     optional name of child block
+     * @return string   compiled code of child block
+     */
+    static function compileChildBlock($compiler, $_name = null)
+    {
+        if ($compiler->inheritance_child) {
+            $name1 = Smarty_Internal_Compile_Block::$nested_block_names[0];
+            if (isset($compiler->template->block_data[$name1])) {
+                //  replace inner block name with generic
+                Smarty_Internal_Compile_Block::$block_data[$name1]['source'] .= $compiler->template->block_data[$name1]['source'];
+                Smarty_Internal_Compile_Block::$block_data[$name1]['child'] = true;
+            }
+            $compiler->lex->yypushstate(Smarty_Internal_Templatelexer::CHILDBLOCK);
+            $compiler->has_code = false;
+            return;
+        }
+        // if called by {$smarty.block.child} we must search the name of enclosing {block}
+        if ($_name == null) {
+            $stack_count = count($compiler->_tag_stack);
+            while (--$stack_count >= 0) {
+                if ($compiler->_tag_stack[$stack_count][0] == 'block') {
+                    $_name = trim($compiler->_tag_stack[$stack_count][1][0]['name'], "\"'");
+                    break;
+                }
+            }
+        }
+        if ($_name == null) {
+            $compiler->trigger_template_error(' tag {$smarty.block.child} used outside {block} tags ', $compiler->lex->taglineno);
+        }
+        // undefined child?
+        if (!isset($compiler->template->block_data[$_name]['source'])) {
+            $compiler->popTrace();
+            return '';
+        }
+        // flag that child is already compile by {$smarty.block.child} inclusion
+        $compiler->template->block_data[$_name]['compiled'] = true;
+        $_tpl = new Smarty_Internal_template('string:' . $compiler->template->block_data[$_name]['source'], $compiler->smarty, $compiler->template, $compiler->template->cache_id,
+            $compiler->template->compile_id, $compiler->template->caching, $compiler->template->cache_lifetime);
+        if ($compiler->smarty->debugging) {
+            Smarty_Internal_Debug::ignore($_tpl);
+        }
+        $_tpl->variable_filters = $compiler->template->variable_filters;
+        $_tpl->properties['nocache_hash'] = $compiler->template->properties['nocache_hash'];
+        $_tpl->allow_relative_path = true;
+        $_tpl->compiler->inheritance = true;
+        $_tpl->compiler->suppressHeader = true;
+        $_tpl->compiler->suppressFilter = true;
+        $_tpl->compiler->suppressTemplatePropertyHeader = true;
+        $_tpl->compiler->suppressMergedTemplates = true;
+        $nocache = $compiler->nocache || $compiler->tag_nocache;
+        if (strpos($compiler->template->block_data[$_name]['source'], self::parent) !== false) {
+            $_output = str_replace(self::parent, $compiler->parser->current_buffer->to_smarty_php(), $_tpl->compiler->compileTemplate($_tpl, $nocache));
+        } elseif ($compiler->template->block_data[$_name]['mode'] == 'prepend') {
+            $_output = $_tpl->compiler->compileTemplate($_tpl, $nocache) . $compiler->parser->current_buffer->to_smarty_php();
+        } elseif ($compiler->template->block_data[$_name]['mode'] == 'append') {
+            $_output = $compiler->parser->current_buffer->to_smarty_php() . $_tpl->compiler->compileTemplate($_tpl, $nocache);
+        } elseif (!empty($compiler->template->block_data[$_name])) {
+            $_output = $_tpl->compiler->compileTemplate($_tpl, $nocache);
+        }
+        $compiler->template->properties['file_dependency'] = array_merge($compiler->template->properties['file_dependency'], $_tpl->properties['file_dependency']);
+        $compiler->template->properties['function'] = array_merge($compiler->template->properties['function'], $_tpl->properties['function']);
+        $compiler->merged_templates = array_merge($compiler->merged_templates, $_tpl->compiler->merged_templates);
+        $compiler->template->variable_filters = $_tpl->variable_filters;
+        if ($_tpl->has_nocache_code) {
+            $compiler->template->has_nocache_code = true;
+        }
+        foreach ($_tpl->required_plugins as $key => $tmp1) {
+            if ($compiler->nocache && $compiler->template->caching) {
+                $code = 'nocache';
+            } else {
+                $code = $key;
+            }
+            foreach ($tmp1 as $name => $tmp) {
+                foreach ($tmp as $type => $data) {
+                    $compiler->template->required_plugins[$code][$name][$type] = $data;
+                }
+            }
+        }
+        unset($_tpl);
+        $compiler->has_code = true;
+        return $_output;
+    }
+
+    /**
+     * Compile $smarty.block.parent
+     *
+     * @param object $compiler  compiler object
+     * @param string $_name     optional name of child block
+     * @return string   compiled code of schild block
+     */
+    static function compileParentBlock($compiler, $_name = null)
+    {
+        // if called by {$smarty.block.parent} we must search the name of enclosing {block}
+        if ($_name == null) {
+            $stack_count = count($compiler->_tag_stack);
+            while (--$stack_count >= 0) {
+                if ($compiler->_tag_stack[$stack_count][0] == 'block') {
+                    $_name = trim($compiler->_tag_stack[$stack_count][1][0]['name'], "\"'");
+                    break;
+                }
+            }
+        }
+        if ($_name == null) {
+            $compiler->trigger_template_error(' tag {$smarty.block.parent} used outside {block} tags ', $compiler->lex->taglineno);
+        }
+        if (empty(Smarty_Internal_Compile_Block::$nested_block_names)) {
+            $compiler->trigger_template_error(' illegal {$smarty.block.parent} in parent template ', $compiler->lex->taglineno);
+        }
+        Smarty_Internal_Compile_Block::$block_data[Smarty_Internal_Compile_Block::$nested_block_names[0]]['source'] .= Smarty_Internal_Compile_Block::parent;
+        $compiler->lex->yypushstate(Smarty_Internal_Templatelexer::CHILDBLOCK);
+        $compiler->has_code = false;
+        return;
+    }
+
+    /**
+     * Process block source
+     *
+     * @param string $source    source text
+     * @return ''
+     */
+    static function blockSource($compiler, $source)
+    {
+        Smarty_Internal_Compile_Block::$block_data[Smarty_Internal_Compile_Block::$nested_block_names[0]]['source'] .= $source;
+    }
+
+}
+
+
+/**
+ * Smarty Internal Plugin Compile BlockClose Class
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ */
+class Smarty_Internal_Compile_Blockclose extends Smarty_Internal_CompileBase
+{
+    /**
+     * Compiles code for the {/block} tag
+     *
+     * @param array $args     array with attributes from parser
+     * @param object $compiler compiler object
+     * @return string compiled code
+     */
+    public function compile($args, $compiler)
+    {
+        $compiler->has_code = true;
+        // check and get attributes
+        $_attr = $this->getAttributes($compiler, $args);
+        $saved_data = $this->closeTag($compiler, array('block'));
+        $_name = trim($saved_data[0]['name'], "\"'");
+        // reset flag for {block} tag
+        $compiler->inheritance = $saved_data[1];
+        // check if we process an inheritance child template
+        if ($compiler->inheritance_child) {
+            $name1 = Smarty_Internal_Compile_Block::$nested_block_names[0];
+            Smarty_Internal_Compile_Block::$block_data[$name1]['source'] .= "{$compiler->smarty->left_delimiter}/private_child_block{$compiler->smarty->right_delimiter}";
+            $level = count(Smarty_Internal_Compile_Block::$nested_block_names);
+            array_shift(Smarty_Internal_Compile_Block::$nested_block_names);
+            if (!empty(Smarty_Internal_Compile_Block::$nested_block_names)) {
+                $name2 = Smarty_Internal_Compile_Block::$nested_block_names[0];
+                if (isset($compiler->template->block_data[$name1]) || !$saved_data[0]['hide']) {
+                    if (isset(Smarty_Internal_Compile_Block::$block_data[$name1]['child']) || !isset($compiler->template->block_data[$name1])) {
+                        Smarty_Internal_Compile_Block::$block_data[$name2]['source'] .= Smarty_Internal_Compile_Block::$block_data[$name1]['source'];
+                    } else {
+                        if ($compiler->template->block_data[$name1]['mode'] == 'append') {
+                            Smarty_Internal_Compile_Block::$block_data[$name2]['source'] .= Smarty_Internal_Compile_Block::$block_data[$name1]['source'] . $compiler->template->block_data[$name1]['source'];
+                        } elseif ($compiler->template->block_data[$name1]['mode'] == 'prepend') {
+                            Smarty_Internal_Compile_Block::$block_data[$name2]['source'] .= $compiler->template->block_data[$name1]['source'] . Smarty_Internal_Compile_Block::$block_data[$name1]['source'];
+                        } else {
+                            Smarty_Internal_Compile_Block::$block_data[$name2]['source'] .= $compiler->template->block_data[$name1]['source'];
+                        }
+                    }
+                }
+                unset(Smarty_Internal_Compile_Block::$block_data[$name1]);
+                $compiler->lex->yypushstate(Smarty_Internal_Templatelexer::CHILDBLOCK);
+            } else {
+                if (isset($compiler->template->block_data[$name1]) || !$saved_data[0]['hide']) {
+                    if (isset($compiler->template->block_data[$name1]) && !isset(Smarty_Internal_Compile_Block::$block_data[$name1]['child'])) {
+                        if (strpos($compiler->template->block_data[$name1]['source'], Smarty_Internal_Compile_Block::parent) !== false) {
+                            $compiler->template->block_data[$name1]['source'] =
+                                str_replace(Smarty_Internal_Compile_Block::parent, Smarty_Internal_Compile_Block::$block_data[$name1]['source'], $compiler->template->block_data[$name1]['source']);
+                        } elseif ($compiler->template->block_data[$name1]['mode'] == 'prepend') {
+                            $compiler->template->block_data[$name1]['source'] .= Smarty_Internal_Compile_Block::$block_data[$name1]['source'];
+                        } elseif ($compiler->template->block_data[$name1]['mode'] == 'append') {
+                            $compiler->template->block_data[$name1]['source'] = Smarty_Internal_Compile_Block::$block_data[$name1]['source'] . $compiler->template->block_data[$name1]['source'];
+                        }
+                    } else {
+                        $compiler->template->block_data[$name1]['source'] = Smarty_Internal_Compile_Block::$block_data[$name1]['source'];
+                    }
+                    $compiler->template->block_data[$name1]['mode'] = 'replace';
+                    if ($saved_data[0]['append']) {
+                        $compiler->template->block_data[$name1]['mode'] = 'append';
+                    }
+                    if ($saved_data[0]['prepend']) {
+                        $compiler->template->block_data[$name1]['mode'] = 'prepend';
+                    }
+                }
+                unset(Smarty_Internal_Compile_Block::$block_data[$name1]);
+                $compiler->lex->yypushstate(Smarty_Internal_Templatelexer::CHILDBODY);
+            }
+            $compiler->has_code = false;
+            return;
+        }
+        if (isset($compiler->template->block_data[$_name]) && !isset($compiler->template->block_data[$_name]['compiled'])) {
+            $_output = Smarty_Internal_Compile_Block::compileChildBlock($compiler, $_name);
+        } else {
+            if ($saved_data[0]['hide'] && !isset($compiler->template->block_data[$_name]['source'])) {
+                $_output = '';
+            } else {
+                $_output = $compiler->parser->current_buffer->to_smarty_php();
+            }
+            unset($compiler->template->block_data[$_name]['compiled']);
+        }
+        // reset flags
+        $compiler->parser->current_buffer = $saved_data[2];
+        if ($compiler->nocache) {
+            $compiler->tag_nocache = true;
+        }
+        $compiler->nocache = $saved_data[3];
+        // $_output content has already nocache code processed
+        $compiler->suppressNocacheProcessing = true;
+
+        return $_output;
+    }
+}
+
+/**
+ * Smarty Internal Plugin Compile Child Block Class
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ */
+class Smarty_Internal_Compile_Private_Child_Block extends Smarty_Internal_CompileBase
+{
+
+    /**
+     * Attribute definition: Overwrites base class.
+     *
+     * @var array
+     * @see Smarty_Internal_CompileBase
+     */
+    public $required_attributes = array('name', 'file', 'uid', 'line');
+
+
+    /**
+     * Compiles code for the {private_child_block} tag
+     *
+     * @param array $args     array with attributes from parser
+     * @param object $compiler compiler object
+     * @return boolean true
+     */
+    public function compile($args, $compiler)
+    {
+        // check and get attributes
+        $_attr = $this->getAttributes($compiler, $args);
+
+        // must merge includes
+        if ($_attr['nocache'] == true) {
+            $compiler->tag_nocache = true;
+        }
+        $save = array($_attr, $compiler->nocache);
+
+        // set trace back to child block
+        $compiler->pushTrace(trim($_attr['file'], "\"'"), trim($_attr['uid'], "\"'"), $_attr['line'] - $compiler->lex->line);
+
+        $this->openTag($compiler, 'private_child_block', $save);
+
+        $compiler->nocache = $compiler->nocache | $compiler->tag_nocache;
+        $compiler->has_code = false;
+
+        return true;
+    }
+}
+
+/**
+ * Smarty Internal Plugin Compile Child Block Close Class
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ */
+class Smarty_Internal_Compile_Private_Child_Blockclose extends Smarty_Internal_CompileBase
+{
+
+
+    /**
+     * Compiles code for the {/private_child_block} tag
+     *
+     * @param array $args     array with attributes from parser
+     * @param object $compiler compiler object
+     * @return boolean true
+     */
+    public function compile($args, $compiler)
+    {
+        // check and get attributes
+        $_attr = $this->getAttributes($compiler, $args);
+
+        $saved_data = $this->closeTag($compiler, array('private_child_block'));
+
+        // end of child block
+        $compiler->popTrace();
+
+        $compiler->nocache = $saved_data[1];
+        $compiler->has_code = false;
+
+        return true;
+    }
+}

resources/templates/engine/smarty/sysplugins/smarty_internal_compile_break.php

@@ -0,0 +1,75 @@
+<?php
+/**
+ * Smarty Internal Plugin Compile Break
+ *
+ * Compiles the {break} tag
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ * @author Uwe Tews
+ */
+/**
+ * Smarty Internal Plugin Compile Break Class
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ */
+class Smarty_Internal_Compile_Break extends Smarty_Internal_CompileBase
+{
+    /**
+     * Attribute definition: Overwrites base class.
+     *
+     * @var array
+     * @see Smarty_Internal_CompileBase
+     */
+    public $optional_attributes = array('levels');
+    /**
+     * Attribute definition: Overwrites base class.
+     *
+     * @var array
+     * @see Smarty_Internal_CompileBase
+     */
+    public $shorttag_order = array('levels');
+
+    /**
+     * Compiles code for the {break} tag
+     *
+     * @param  array  $args      array with attributes from parser
+     * @param  object $compiler  compiler object
+     * @param  array  $parameter array with compilation parameter
+     * @return string compiled code
+     */
+    public function compile($args, $compiler, $parameter)
+    {
+        static $_is_loopy = array('for' => true, 'foreach' => true, 'while' => true, 'section' => true);
+        // check and get attributes
+        $_attr = $this->getAttributes($compiler, $args);
+
+        if ($_attr['nocache'] === true) {
+            $compiler->trigger_template_error('nocache option not allowed', $compiler->lex->taglineno);
+        }
+
+        if (isset($_attr['levels'])) {
+            if (!is_numeric($_attr['levels'])) {
+                $compiler->trigger_template_error('level attribute must be a numeric constant', $compiler->lex->taglineno);
+            }
+            $_levels = $_attr['levels'];
+        } else {
+            $_levels = 1;
+        }
+        $level_count = $_levels;
+        $stack_count = count($compiler->_tag_stack) - 1;
+        while ($level_count > 0 && $stack_count >= 0) {
+            if (isset($_is_loopy[$compiler->_tag_stack[$stack_count][0]])) {
+                $level_count--;
+            }
+            $stack_count--;
+        }
+        if ($level_count != 0) {
+            $compiler->trigger_template_error("cannot break {$_levels} level(s)", $compiler->lex->taglineno);
+        }
+
+        return "<?php break {$_levels}?>";
+    }
+
+}

resources/templates/engine/smarty/sysplugins/smarty_internal_compile_call.php

@@ -0,0 +1,129 @@
+<?php
+/**
+ * Smarty Internal Plugin Compile Function_Call
+ *
+ * Compiles the calls of user defined tags defined by {function}
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ * @author Uwe Tews
+ */
+
+/**
+ * Smarty Internal Plugin Compile Function_Call Class
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ */
+class Smarty_Internal_Compile_Call extends Smarty_Internal_CompileBase
+{
+    /**
+     * Attribute definition: Overwrites base class.
+     *
+     * @var array
+     * @see Smarty_Internal_CompileBase
+     */
+    public $required_attributes = array('name');
+    /**
+     * Attribute definition: Overwrites base class.
+     *
+     * @var array
+     * @see Smarty_Internal_CompileBase
+     */
+    public $shorttag_order = array('name');
+    /**
+     * Attribute definition: Overwrites base class.
+     *
+     * @var array
+     * @see Smarty_Internal_CompileBase
+     */
+    public $optional_attributes = array('_any');
+
+    /**
+     * Compiles the calls of user defined tags defined by {function}
+     *
+     * @param  array  $args      array with attributes from parser
+     * @param  object $compiler  compiler object
+     * @param  array  $parameter array with compilation parameter
+     * @return string compiled code
+     */
+    public function compile($args, $compiler)
+    {
+        // check and get attributes
+        $_attr = $this->getAttributes($compiler, $args);
+        // save possible attributes
+        if (isset($_attr['assign'])) {
+            // output will be stored in a smarty variable instead of beind displayed
+            $_assign = $_attr['assign'];
+        }
+        $_name = $_attr['name'];
+        if ($compiler->compiles_template_function) {
+            $compiler->called_functions[] = trim($_name, "'\"");
+        }
+        unset($_attr['name'], $_attr['assign'], $_attr['nocache']);
+        // set flag (compiled code of {function} must be included in cache file
+        if ($compiler->nocache || $compiler->tag_nocache) {
+            $_nocache = 'true';
+        } else {
+            $_nocache = 'false';
+        }
+        $_paramsArray = array();
+        foreach ($_attr as $_key => $_value) {
+            if (is_int($_key)) {
+                $_paramsArray[] = "$_key=>$_value";
+            } else {
+                $_paramsArray[] = "'$_key'=>$_value";
+            }
+        }
+        if (isset($compiler->template->properties['function'][$_name]['parameter'])) {
+            foreach ($compiler->template->properties['function'][$_name]['parameter'] as $_key => $_value) {
+                if (!isset($_attr[$_key])) {
+                    if (is_int($_key)) {
+                        $_paramsArray[] = "$_key=>$_value";
+                    } else {
+                        $_paramsArray[] = "'$_key'=>$_value";
+                    }
+                }
+            }
+        } elseif (isset($compiler->smarty->template_functions[$_name]['parameter'])) {
+            foreach ($compiler->smarty->template_functions[$_name]['parameter'] as $_key => $_value) {
+                if (!isset($_attr[$_key])) {
+                    if (is_int($_key)) {
+                        $_paramsArray[] = "$_key=>$_value";
+                    } else {
+                        $_paramsArray[] = "'$_key'=>$_value";
+                    }
+                }
+            }
+        }
+        //varibale name?
+        if (!(strpos($_name, '$') === false)) {
+            $call_cache = $_name;
+            $call_function = '$tmp = "smarty_template_function_".' . $_name . '; $tmp';
+        } else {
+            $_name = trim($_name, "'\"");
+            $call_cache = "'{$_name}'";
+            $call_function = 'smarty_template_function_' . $_name;
+        }
+
+        $_params = 'array(' . implode(",", $_paramsArray) . ')';
+        $_hash = str_replace('-', '_', $compiler->template->properties['nocache_hash']);
+        // was there an assign attribute
+        if (isset($_assign)) {
+            if ($compiler->template->caching) {
+                $_output = "<?php ob_start(); Smarty_Internal_Function_Call_Handler::call ({$call_cache},\$_smarty_tpl,{$_params},'{$_hash}',{$_nocache}); \$_smarty_tpl->assign({$_assign}, ob_get_clean());?>\n";
+            } else {
+                $_output = "<?php ob_start(); {$call_function}(\$_smarty_tpl,{$_params}); \$_smarty_tpl->assign({$_assign}, ob_get_clean());?>\n";
+            }
+        } else {
+            if ($compiler->template->caching) {
+                $_output = "<?php Smarty_Internal_Function_Call_Handler::call ({$call_cache},\$_smarty_tpl,{$_params},'{$_hash}',{$_nocache});?>\n";
+            } else {
+                $_output = "<?php {$call_function}(\$_smarty_tpl,{$_params});?>\n";
+            }
+        }
+
+        return $_output;
+    }
+
+}

resources/templates/engine/smarty/sysplugins/smarty_internal_compile_capture.php

@@ -0,0 +1,97 @@
+<?php
+/**
+ * Smarty Internal Plugin Compile Capture
+ *
+ * Compiles the {capture} tag
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ * @author Uwe Tews
+ */
+
+/**
+ * Smarty Internal Plugin Compile Capture Class
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ */
+class Smarty_Internal_Compile_Capture extends Smarty_Internal_CompileBase
+{
+    /**
+     * Attribute definition: Overwrites base class.
+     *
+     * @var array
+     * @see Smarty_Internal_CompileBase
+     */
+    public $shorttag_order = array('name');
+    /**
+     * Attribute definition: Overwrites base class.
+     *
+     * @var array
+     * @see Smarty_Internal_CompileBase
+     */
+    public $optional_attributes = array('name', 'assign', 'append');
+
+    /**
+     * Compiles code for the {capture} tag
+     *
+     * @param  array  $args     array with attributes from parser
+     * @param  object $compiler compiler object
+     * @return string compiled code
+     */
+    public function compile($args, $compiler)
+    {
+        // check and get attributes
+        $_attr = $this->getAttributes($compiler, $args);
+
+        $buffer = isset($_attr['name']) ? $_attr['name'] : "'default'";
+        $assign = isset($_attr['assign']) ? $_attr['assign'] : 'null';
+        $append = isset($_attr['append']) ? $_attr['append'] : 'null';
+
+        $compiler->_capture_stack[0][] = array($buffer, $assign, $append, $compiler->nocache);
+        // maybe nocache because of nocache variables
+        $compiler->nocache = $compiler->nocache | $compiler->tag_nocache;
+        $_output = "<?php \$_smarty_tpl->_capture_stack[0][] = array($buffer, $assign, $append); ob_start(); ?>";
+
+        return $_output;
+    }
+
+}
+
+/**
+ * Smarty Internal Plugin Compile Captureclose Class
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ */
+class Smarty_Internal_Compile_CaptureClose extends Smarty_Internal_CompileBase
+{
+    /**
+     * Compiles code for the {/capture} tag
+     *
+     * @param  array  $args     array with attributes from parser
+     * @param  object $compiler compiler object
+     * @return string compiled code
+     */
+    public function compile($args, $compiler)
+    {
+        // check and get attributes
+        $_attr = $this->getAttributes($compiler, $args);
+        // must endblock be nocache?
+        if ($compiler->nocache) {
+            $compiler->tag_nocache = true;
+        }
+
+        list($buffer, $assign, $append, $compiler->nocache) = array_pop($compiler->_capture_stack[0]);
+
+        $_output = "<?php list(\$_capture_buffer, \$_capture_assign, \$_capture_append) = array_pop(\$_smarty_tpl->_capture_stack[0]);\n";
+        $_output .= "if (!empty(\$_capture_buffer)) {\n";
+        $_output .= " if (isset(\$_capture_assign)) \$_smarty_tpl->assign(\$_capture_assign, ob_get_contents());\n";
+        $_output .= " if (isset( \$_capture_append)) \$_smarty_tpl->append( \$_capture_append, ob_get_contents());\n";
+        $_output .= " Smarty::\$_smarty_vars['capture'][\$_capture_buffer]=ob_get_clean();\n";
+        $_output .= "} else \$_smarty_tpl->capture_error();?>";
+
+        return $_output;
+    }
+
+}

resources/templates/engine/smarty/sysplugins/smarty_internal_compile_config_load.php

@@ -0,0 +1,83 @@
+<?php
+/**
+ * Smarty Internal Plugin Compile Config Load
+ *
+ * Compiles the {config load} tag
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ * @author Uwe Tews
+ */
+
+/**
+ * Smarty Internal Plugin Compile Config Load Class
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ */
+class Smarty_Internal_Compile_Config_Load extends Smarty_Internal_CompileBase
+{
+    /**
+     * Attribute definition: Overwrites base class.
+     *
+     * @var array
+     * @see Smarty_Internal_CompileBase
+     */
+    public $required_attributes = array('file');
+    /**
+     * Attribute definition: Overwrites base class.
+     *
+     * @var array
+     * @see Smarty_Internal_CompileBase
+     */
+    public $shorttag_order = array('file','section');
+    /**
+     * Attribute definition: Overwrites base class.
+     *
+     * @var array
+     * @see Smarty_Internal_CompileBase
+     */
+    public $optional_attributes = array('section', 'scope');
+
+    /**
+     * Compiles code for the {config_load} tag
+     *
+     * @param  array  $args     array with attributes from parser
+     * @param  object $compiler compiler object
+     * @return string compiled code
+     */
+    public function compile($args, $compiler)
+    {
+        static $_is_legal_scope = array('local' => true,'parent' => true,'root' => true,'global' => true);
+        // check and get attributes
+        $_attr = $this->getAttributes($compiler, $args);
+
+        if ($_attr['nocache'] === true) {
+            $compiler->trigger_template_error('nocache option not allowed', $compiler->lex->taglineno);
+        }
+
+        // save posible attributes
+        $conf_file = $_attr['file'];
+        if (isset($_attr['section'])) {
+            $section = $_attr['section'];
+        } else {
+            $section = 'null';
+        }
+        $scope = 'local';
+        // scope setup
+        if (isset($_attr['scope'])) {
+            $_attr['scope'] = trim($_attr['scope'], "'\"");
+            if (isset($_is_legal_scope[$_attr['scope']])) {
+                $scope = $_attr['scope'];
+           } else {
+                $compiler->trigger_template_error('illegal value for "scope" attribute', $compiler->lex->taglineno);
+           }
+        }
+        // create config object
+        $_output = "<?php  \$_config = new Smarty_Internal_Config($conf_file, \$_smarty_tpl->smarty, \$_smarty_tpl);";
+        $_output .= "\$_config->loadConfigVars($section, '$scope'); ?>";
+
+        return $_output;
+    }
+
+}

resources/templates/engine/smarty/sysplugins/smarty_internal_compile_continue.php

@@ -0,0 +1,76 @@
+<?php
+/**
+ * Smarty Internal Plugin Compile Continue
+ *
+ * Compiles the {continue} tag
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ * @author Uwe Tews
+ */
+
+/**
+ * Smarty Internal Plugin Compile Continue Class
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ */
+class Smarty_Internal_Compile_Continue extends Smarty_Internal_CompileBase
+{
+    /**
+     * Attribute definition: Overwrites base class.
+     *
+     * @var array
+     * @see Smarty_Internal_CompileBase
+     */
+    public $optional_attributes = array('levels');
+    /**
+     * Attribute definition: Overwrites base class.
+     *
+     * @var array
+     * @see Smarty_Internal_CompileBase
+     */
+    public $shorttag_order = array('levels');
+
+    /**
+     * Compiles code for the {continue} tag
+     *
+     * @param  array  $args      array with attributes from parser
+     * @param  object $compiler  compiler object
+     * @param  array  $parameter array with compilation parameter
+     * @return string compiled code
+     */
+    public function compile($args, $compiler, $parameter)
+    {
+        static $_is_loopy = array('for' => true, 'foreach' => true, 'while' => true, 'section' => true);
+        // check and get attributes
+        $_attr = $this->getAttributes($compiler, $args);
+
+        if ($_attr['nocache'] === true) {
+            $compiler->trigger_template_error('nocache option not allowed', $compiler->lex->taglineno);
+        }
+
+        if (isset($_attr['levels'])) {
+            if (!is_numeric($_attr['levels'])) {
+                $compiler->trigger_template_error('level attribute must be a numeric constant', $compiler->lex->taglineno);
+            }
+            $_levels = $_attr['levels'];
+        } else {
+            $_levels = 1;
+        }
+        $level_count = $_levels;
+        $stack_count = count($compiler->_tag_stack) - 1;
+        while ($level_count > 0 && $stack_count >= 0) {
+            if (isset($_is_loopy[$compiler->_tag_stack[$stack_count][0]])) {
+                $level_count--;
+            }
+            $stack_count--;
+        }
+        if ($level_count != 0) {
+            $compiler->trigger_template_error("cannot continue {$_levels} level(s)", $compiler->lex->taglineno);
+        }
+
+        return "<?php continue {$_levels}?>";
+    }
+
+}

resources/templates/engine/smarty/sysplugins/smarty_internal_compile_debug.php

@@ -0,0 +1,42 @@
+<?php
+/**
+ * Smarty Internal Plugin Compile Debug
+ *
+ * Compiles the {debug} tag.
+ * It opens a window the the Smarty Debugging Console.
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ * @author Uwe Tews
+ */
+
+/**
+ * Smarty Internal Plugin Compile Debug Class
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ */
+class Smarty_Internal_Compile_Debug extends Smarty_Internal_CompileBase
+{
+    /**
+     * Compiles code for the {debug} tag
+     *
+     * @param  array  $args     array with attributes from parser
+     * @param  object $compiler compiler object
+     * @return string compiled code
+     */
+    public function compile($args, $compiler)
+    {
+        // check and get attributes
+        $_attr = $this->getAttributes($compiler, $args);
+
+        // compile always as nocache
+        $compiler->tag_nocache = true;
+
+        // display debug template
+        $_output = "<?php \$_smarty_tpl->smarty->loadPlugin('Smarty_Internal_Debug'); Smarty_Internal_Debug::display_debug(\$_smarty_tpl); ?>";
+
+        return $_output;
+    }
+
+}

resources/templates/engine/smarty/sysplugins/smarty_internal_compile_eval.php

@@ -0,0 +1,72 @@
+<?php
+/**
+ * Smarty Internal Plugin Compile Eval
+ *
+ * Compiles the {eval} tag.
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ * @author Uwe Tews
+ */
+
+/**
+ * Smarty Internal Plugin Compile Eval Class
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ */
+class Smarty_Internal_Compile_Eval extends Smarty_Internal_CompileBase
+{
+    /**
+     * Attribute definition: Overwrites base class.
+     *
+     * @var array
+     * @see Smarty_Internal_CompileBase
+     */
+    public $required_attributes = array('var');
+    /**
+     * Attribute definition: Overwrites base class.
+     *
+     * @var array
+     * @see Smarty_Internal_CompileBase
+     */
+    public $optional_attributes = array('assign');
+    /**
+     * Attribute definition: Overwrites base class.
+     *
+     * @var array
+     * @see Smarty_Internal_CompileBase
+     */
+    public $shorttag_order = array('var','assign');
+
+    /**
+     * Compiles code for the {eval} tag
+     *
+     * @param  array  $args     array with attributes from parser
+     * @param  object $compiler compiler object
+     * @return string compiled code
+     */
+    public function compile($args, $compiler)
+    {
+        $this->required_attributes = array('var');
+        $this->optional_attributes = array('assign');
+        // check and get attributes
+        $_attr = $this->getAttributes($compiler, $args);
+        if (isset($_attr['assign'])) {
+              // output will be stored in a smarty variable instead of beind displayed
+            $_assign = $_attr['assign'];
+        }
+
+        // create template object
+        $_output = "\$_template = new {$compiler->smarty->template_class}('eval:'.".$_attr['var'].", \$_smarty_tpl->smarty, \$_smarty_tpl);";
+        //was there an assign attribute?
+        if (isset($_assign)) {
+            $_output .= "\$_smarty_tpl->assign($_assign,\$_template->fetch());";
+        } else {
+            $_output .= "echo \$_template->fetch();";
+        }
+
+        return "<?php $_output ?>";
+    }
+
+}

resources/templates/engine/smarty/sysplugins/smarty_internal_compile_extends.php

@@ -0,0 +1,87 @@
+<?php
+
+/**
+ * Smarty Internal Plugin Compile extend
+ *
+ * Compiles the {extends} tag
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ * @author Uwe Tews
+ */
+
+/**
+ * Smarty Internal Plugin Compile extend Class
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ */
+class Smarty_Internal_Compile_Extends extends Smarty_Internal_CompileBase
+{
+    /**
+     * Attribute definition: Overwrites base class.
+     *
+     * @var array
+     * @see Smarty_Internal_CompileBase
+     */
+    public $required_attributes = array('file');
+    /**
+     * Attribute definition: Overwrites base class.
+     *
+     * @var array
+     * @see Smarty_Internal_CompileBase
+     */
+    public $shorttag_order = array('file');
+
+    /**
+     * Compiles code for the {extends} tag
+     *
+     * @param array $args     array with attributes from parser
+     * @param object $compiler compiler object
+     * @return string compiled code
+     */
+    public function compile($args, $compiler)
+    {
+        // check and get attributes
+        $_attr = $this->getAttributes($compiler, $args);
+        if ($_attr['nocache'] === true) {
+            $compiler->trigger_template_error('nocache option not allowed', $compiler->lex->taglineno);
+        }
+        if (strpos($_attr['file'], '$_tmp') !== false) {
+            $compiler->trigger_template_error('illegal value for file attribute', $compiler->lex->taglineno);
+        }
+        // add tag to call parent template at the end of source
+
+        if ($compiler->has_variable_string || !((substr_count($_attr['file'], '"') == 2 || substr_count($_attr['file'], "'") == 2))
+            || substr_count($_attr['file'], '(') != 0 || substr_count($_attr['file'], '$_smarty_tpl->') != 0
+        ) {
+            $compiler->trigger_template_error('variable template file name not allowed', $compiler->lex->taglineno);
+        }
+
+        $name = trim($_attr['file'],"\"'");
+        // create template object
+        $_template = new $compiler->smarty->template_class($name, $compiler->smarty, $compiler->template);
+        // check for recursion
+        $uid = $_template->source->uid;
+        if (isset($compiler->extends_uid[$uid])) {
+            $compiler->trigger_template_error("illegal recursive call of \"$include_file\"", $this->lex->line - 1);
+        }
+        $compiler->extends_uid[$uid] = true;
+        if (empty($_template->source->components)) {
+            array_unshift($compiler->sources, $_template->source);
+        } else {
+            foreach ($_template->source->components as $source) {
+                array_unshift($compiler->sources, $source);
+                $uid = $source->uid;
+                if (isset($compiler->extends_uid[$uid])) {
+                    $compiler->trigger_template_error("illegal recursive call of \"{$sorce->filepath}\"", $this->lex->line - 1);
+                }
+                $compiler->extends_uid[$uid] = true;
+            }
+        }
+        unset ($_template);
+        $compiler->inheritance_child = true;
+        $compiler->lex->yypushstate(Smarty_Internal_Templatelexer::CHILDBODY);
+        return '';
+    }
+}

resources/templates/engine/smarty/sysplugins/smarty_internal_compile_for.php

@@ -0,0 +1,150 @@
+<?php
+/**
+ * Smarty Internal Plugin Compile For
+ *
+ * Compiles the {for} {forelse} {/for} tags
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ * @author Uwe Tews
+ */
+
+/**
+ * Smarty Internal Plugin Compile For Class
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ */
+class Smarty_Internal_Compile_For extends Smarty_Internal_CompileBase
+{
+    /**
+     * Compiles code for the {for} tag
+     *
+     * Smarty 3 does implement two different sytaxes:
+     *
+     * - {for $var in $array}
+     * For looping over arrays or iterators
+     *
+     * - {for $x=0; $x<$y; $x++}
+     * For general loops
+     *
+     * The parser is gereration different sets of attribute by which this compiler can
+     * determin which syntax is used.
+     *
+     * @param  array  $args      array with attributes from parser
+     * @param  object $compiler  compiler object
+     * @param  array  $parameter array with compilation parameter
+     * @return string compiled code
+     */
+    public function compile($args, $compiler, $parameter)
+    {
+        if ($parameter == 0) {
+            $this->required_attributes = array('start', 'to');
+            $this->optional_attributes = array('max', 'step');
+        } else {
+            $this->required_attributes = array('start', 'ifexp', 'var', 'step');
+            $this->optional_attributes = array();
+        }
+        // check and get attributes
+        $_attr = $this->getAttributes($compiler, $args);
+
+        $output = "<?php ";
+        if ($parameter == 1) {
+            foreach ($_attr['start'] as $_statement) {
+                $output .= " \$_smarty_tpl->tpl_vars[$_statement[var]] = new Smarty_Variable;";
+                $output .= " \$_smarty_tpl->tpl_vars[$_statement[var]]->value = $_statement[value];\n";
+            }
+            $output .= "  if ($_attr[ifexp]) { for (\$_foo=true;$_attr[ifexp]; \$_smarty_tpl->tpl_vars[$_attr[var]]->value$_attr[step]) {\n";
+        } else {
+            $_statement = $_attr['start'];
+            $output .= "\$_smarty_tpl->tpl_vars[$_statement[var]] = new Smarty_Variable;";
+            if (isset($_attr['step'])) {
+                $output .= "\$_smarty_tpl->tpl_vars[$_statement[var]]->step = $_attr[step];";
+            } else {
+                $output .= "\$_smarty_tpl->tpl_vars[$_statement[var]]->step = 1;";
+            }
+            if (isset($_attr['max'])) {
+                $output .= "\$_smarty_tpl->tpl_vars[$_statement[var]]->total = (int) min(ceil((\$_smarty_tpl->tpl_vars[$_statement[var]]->step > 0 ? $_attr[to]+1 - ($_statement[value]) : $_statement[value]-($_attr[to])+1)/abs(\$_smarty_tpl->tpl_vars[$_statement[var]]->step)),$_attr[max]);\n";
+            } else {
+                $output .= "\$_smarty_tpl->tpl_vars[$_statement[var]]->total = (int) ceil((\$_smarty_tpl->tpl_vars[$_statement[var]]->step > 0 ? $_attr[to]+1 - ($_statement[value]) : $_statement[value]-($_attr[to])+1)/abs(\$_smarty_tpl->tpl_vars[$_statement[var]]->step));\n";
+            }
+            $output .= "if (\$_smarty_tpl->tpl_vars[$_statement[var]]->total > 0) {\n";
+            $output .= "for (\$_smarty_tpl->tpl_vars[$_statement[var]]->value = $_statement[value], \$_smarty_tpl->tpl_vars[$_statement[var]]->iteration = 1;\$_smarty_tpl->tpl_vars[$_statement[var]]->iteration <= \$_smarty_tpl->tpl_vars[$_statement[var]]->total;\$_smarty_tpl->tpl_vars[$_statement[var]]->value += \$_smarty_tpl->tpl_vars[$_statement[var]]->step, \$_smarty_tpl->tpl_vars[$_statement[var]]->iteration++) {\n";
+            $output .= "\$_smarty_tpl->tpl_vars[$_statement[var]]->first = \$_smarty_tpl->tpl_vars[$_statement[var]]->iteration == 1;";
+            $output .= "\$_smarty_tpl->tpl_vars[$_statement[var]]->last = \$_smarty_tpl->tpl_vars[$_statement[var]]->iteration == \$_smarty_tpl->tpl_vars[$_statement[var]]->total;";
+        }
+        $output .= "?>";
+
+        $this->openTag($compiler, 'for', array('for', $compiler->nocache));
+        // maybe nocache because of nocache variables
+        $compiler->nocache = $compiler->nocache | $compiler->tag_nocache;
+        // return compiled code
+        return $output;
+    }
+
+}
+
+/**
+ * Smarty Internal Plugin Compile Forelse Class
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ */
+class Smarty_Internal_Compile_Forelse extends Smarty_Internal_CompileBase
+{
+    /**
+     * Compiles code for the {forelse} tag
+     *
+     * @param  array  $args      array with attributes from parser
+     * @param  object $compiler  compiler object
+     * @param  array  $parameter array with compilation parameter
+     * @return string compiled code
+     */
+    public function compile($args, $compiler, $parameter)
+    {
+        // check and get attributes
+        $_attr  = $this->getAttributes($compiler, $args);
+
+        list($openTag, $nocache) = $this->closeTag($compiler, array('for'));
+        $this->openTag($compiler, 'forelse', array('forelse', $nocache));
+
+        return "<?php }} else { ?>";
+    }
+
+}
+
+/**
+ * Smarty Internal Plugin Compile Forclose Class
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ */
+class Smarty_Internal_Compile_Forclose extends Smarty_Internal_CompileBase
+{
+    /**
+     * Compiles code for the {/for} tag
+     *
+     * @param  array  $args      array with attributes from parser
+     * @param  object $compiler  compiler object
+     * @param  array  $parameter array with compilation parameter
+     * @return string compiled code
+     */
+    public function compile($args, $compiler, $parameter)
+    {
+        // check and get attributes
+        $_attr = $this->getAttributes($compiler, $args);
+        // must endblock be nocache?
+        if ($compiler->nocache) {
+            $compiler->tag_nocache = true;
+        }
+
+        list($openTag, $compiler->nocache) = $this->closeTag($compiler, array('for', 'forelse'));
+
+        if ($openTag == 'forelse') {
+            return "<?php }  ?>";
+        } else {
+            return "<?php }} ?>";
+        }
+    }
+
+}

resources/templates/engine/smarty/sysplugins/smarty_internal_compile_foreach.php

@@ -0,0 +1,230 @@
+<?php
+/**
+ * Smarty Internal Plugin Compile Foreach
+ *
+ * Compiles the {foreach} {foreachelse} {/foreach} tags
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ * @author Uwe Tews
+ */
+
+/**
+ * Smarty Internal Plugin Compile Foreach Class
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ */
+class Smarty_Internal_Compile_Foreach extends Smarty_Internal_CompileBase
+{
+    /**
+     * Attribute definition: Overwrites base class.
+     *
+     * @var array
+     * @see Smarty_Internal_CompileBase
+     */
+    public $required_attributes = array('from', 'item');
+    /**
+     * Attribute definition: Overwrites base class.
+     *
+     * @var array
+     * @see Smarty_Internal_CompileBase
+     */
+    public $optional_attributes = array('name', 'key');
+    /**
+     * Attribute definition: Overwrites base class.
+     *
+     * @var array
+     * @see Smarty_Internal_CompileBase
+     */
+    public $shorttag_order = array('from','item','key','name');
+
+    /**
+     * Compiles code for the {foreach} tag
+     *
+     * @param  array  $args      array with attributes from parser
+     * @param  object $compiler  compiler object
+     * @param  array  $parameter array with compilation parameter
+     * @return string compiled code
+     */
+    public function compile($args, $compiler, $parameter)
+    {
+        $tpl = $compiler->template;
+        // check and get attributes
+        $_attr = $this->getAttributes($compiler, $args);
+
+        $from = $_attr['from'];
+        $item = $_attr['item'];
+        if (!strncmp("\$_smarty_tpl->tpl_vars[$item]", $from, strlen($item) + 24)) {
+            $compiler->trigger_template_error("item variable {$item} may not be the same variable as at 'from'", $compiler->lex->taglineno);
+        }
+
+        if (isset($_attr['key'])) {
+            $key = $_attr['key'];
+        } else {
+            $key = null;
+        }
+
+        $this->openTag($compiler, 'foreach', array('foreach', $compiler->nocache, $item, $key));
+        // maybe nocache because of nocache variables
+        $compiler->nocache = $compiler->nocache | $compiler->tag_nocache;
+
+        if (isset($_attr['name'])) {
+            $name = $_attr['name'];
+            $has_name = true;
+            $SmartyVarName = '$smarty.foreach.' . trim($name, '\'"') . '.';
+        } else {
+            $name = null;
+            $has_name = false;
+        }
+        $ItemVarName = '$' . trim($item, '\'"') . '@';
+        // evaluates which Smarty variables and properties have to be computed
+        if ($has_name) {
+            $usesSmartyFirst = strpos($tpl->source->content, $SmartyVarName . 'first') !== false;
+            $usesSmartyLast = strpos($tpl->source->content, $SmartyVarName . 'last') !== false;
+            $usesSmartyIndex = strpos($tpl->source->content, $SmartyVarName . 'index') !== false;
+            $usesSmartyIteration = strpos($tpl->source->content, $SmartyVarName . 'iteration') !== false;
+            $usesSmartyShow = strpos($tpl->source->content, $SmartyVarName . 'show') !== false;
+            $usesSmartyTotal = strpos($tpl->source->content, $SmartyVarName . 'total') !== false;
+        } else {
+            $usesSmartyFirst = false;
+            $usesSmartyLast = false;
+            $usesSmartyTotal = false;
+            $usesSmartyShow = false;
+        }
+
+        $usesPropFirst = $usesSmartyFirst || strpos($tpl->source->content, $ItemVarName . 'first') !== false;
+        $usesPropLast = $usesSmartyLast || strpos($tpl->source->content, $ItemVarName . 'last') !== false;
+        $usesPropIndex = $usesPropFirst || strpos($tpl->source->content, $ItemVarName . 'index') !== false;
+        $usesPropIteration = $usesPropLast || strpos($tpl->source->content, $ItemVarName . 'iteration') !== false;
+        $usesPropShow = strpos($tpl->source->content, $ItemVarName . 'show') !== false;
+        $usesPropTotal = $usesSmartyTotal || $usesSmartyShow || $usesPropShow || $usesPropLast || strpos($tpl->source->content, $ItemVarName . 'total') !== false;
+        // generate output code
+        $output = "<?php ";
+        $output .= " \$_smarty_tpl->tpl_vars[$item] = new Smarty_Variable; \$_smarty_tpl->tpl_vars[$item]->_loop = false;\n";
+        if ($key != null) {
+            $output .= " \$_smarty_tpl->tpl_vars[$key] = new Smarty_Variable;\n";
+        }
+        $output .= " \$_from = $from; if (!is_array(\$_from) && !is_object(\$_from)) { settype(\$_from, 'array');}\n";
+        if ($usesPropTotal) {
+            $output .= " \$_smarty_tpl->tpl_vars[$item]->total= \$_smarty_tpl->_count(\$_from);\n";
+        }
+        if ($usesPropIteration) {
+            $output .= " \$_smarty_tpl->tpl_vars[$item]->iteration=0;\n";
+        }
+        if ($usesPropIndex) {
+            $output .= " \$_smarty_tpl->tpl_vars[$item]->index=-1;\n";
+        }
+        if ($usesPropShow) {
+            $output .= " \$_smarty_tpl->tpl_vars[$item]->show = (\$_smarty_tpl->tpl_vars[$item]->total > 0);\n";
+        }
+        if ($has_name) {
+            if ($usesSmartyTotal) {
+                $output .= " \$_smarty_tpl->tpl_vars['smarty']->value['foreach'][$name]['total'] = \$_smarty_tpl->tpl_vars[$item]->total;\n";
+            }
+            if ($usesSmartyIteration) {
+                $output .= " \$_smarty_tpl->tpl_vars['smarty']->value['foreach'][$name]['iteration']=0;\n";
+            }
+            if ($usesSmartyIndex) {
+                $output .= " \$_smarty_tpl->tpl_vars['smarty']->value['foreach'][$name]['index']=-1;\n";
+            }
+            if ($usesSmartyShow) {
+                $output .= " \$_smarty_tpl->tpl_vars['smarty']->value['foreach'][$name]['show']=(\$_smarty_tpl->tpl_vars[$item]->total > 0);\n";
+            }
+        }
+        $output .= "foreach (\$_from as \$_smarty_tpl->tpl_vars[$item]->key => \$_smarty_tpl->tpl_vars[$item]->value) {\n\$_smarty_tpl->tpl_vars[$item]->_loop = true;\n";
+        if ($key != null) {
+            $output .= " \$_smarty_tpl->tpl_vars[$key]->value = \$_smarty_tpl->tpl_vars[$item]->key;\n";
+        }
+        if ($usesPropIteration) {
+            $output .= " \$_smarty_tpl->tpl_vars[$item]->iteration++;\n";
+        }
+        if ($usesPropIndex) {
+            $output .= " \$_smarty_tpl->tpl_vars[$item]->index++;\n";
+        }
+        if ($usesPropFirst) {
+            $output .= " \$_smarty_tpl->tpl_vars[$item]->first = \$_smarty_tpl->tpl_vars[$item]->index === 0;\n";
+        }
+        if ($usesPropLast) {
+            $output .= " \$_smarty_tpl->tpl_vars[$item]->last = \$_smarty_tpl->tpl_vars[$item]->iteration === \$_smarty_tpl->tpl_vars[$item]->total;\n";
+        }
+        if ($has_name) {
+            if ($usesSmartyFirst) {
+                $output .= " \$_smarty_tpl->tpl_vars['smarty']->value['foreach'][$name]['first'] = \$_smarty_tpl->tpl_vars[$item]->first;\n";
+            }
+            if ($usesSmartyIteration) {
+                $output .= " \$_smarty_tpl->tpl_vars['smarty']->value['foreach'][$name]['iteration']++;\n";
+            }
+            if ($usesSmartyIndex) {
+                $output .= " \$_smarty_tpl->tpl_vars['smarty']->value['foreach'][$name]['index']++;\n";
+            }
+            if ($usesSmartyLast) {
+                $output .= " \$_smarty_tpl->tpl_vars['smarty']->value['foreach'][$name]['last'] = \$_smarty_tpl->tpl_vars[$item]->last;\n";
+            }
+        }
+        $output .= "?>";
+
+        return $output;
+    }
+}
+
+/**
+ * Smarty Internal Plugin Compile Foreachelse Class
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ */
+class Smarty_Internal_Compile_Foreachelse extends Smarty_Internal_CompileBase
+{
+    /**
+     * Compiles code for the {foreachelse} tag
+     *
+     * @param  array  $args      array with attributes from parser
+     * @param  object $compiler  compiler object
+     * @param  array  $parameter array with compilation parameter
+     * @return string compiled code
+     */
+    public function compile($args, $compiler, $parameter)
+    {
+        // check and get attributes
+        $_attr = $this->getAttributes($compiler, $args);
+
+        list($openTag, $nocache, $item, $key) = $this->closeTag($compiler, array('foreach'));
+        $this->openTag($compiler, 'foreachelse', array('foreachelse', $nocache, $item, $key));
+
+        return "<?php }\nif (!\$_smarty_tpl->tpl_vars[$item]->_loop) {\n?>";
+    }
+
+}
+
+/**
+ * Smarty Internal Plugin Compile Foreachclose Class
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ */
+class Smarty_Internal_Compile_Foreachclose extends Smarty_Internal_CompileBase
+{
+    /**
+     * Compiles code for the {/foreach} tag
+     *
+     * @param  array  $args      array with attributes from parser
+     * @param  object $compiler  compiler object
+     * @param  array  $parameter array with compilation parameter
+     * @return string compiled code
+     */
+    public function compile($args, $compiler, $parameter)
+    {
+        // check and get attributes
+        $_attr = $this->getAttributes($compiler, $args);
+        // must endblock be nocache?
+        if ($compiler->nocache) {
+            $compiler->tag_nocache = true;
+        }
+
+        list($openTag, $compiler->nocache, $item, $key) = $this->closeTag($compiler, array('foreach', 'foreachelse'));
+
+        return "<?php } ?>";
+    }
+
+}

resources/templates/engine/smarty/sysplugins/smarty_internal_compile_function.php

@@ -0,0 +1,165 @@
+<?php
+/**
+ * Smarty Internal Plugin Compile Function
+ *
+ * Compiles the {function} {/function} tags
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ * @author Uwe Tews
+ */
+
+/**
+ * Smarty Internal Plugin Compile Function Class
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ */
+class Smarty_Internal_Compile_Function extends Smarty_Internal_CompileBase
+{
+    /**
+     * Attribute definition: Overwrites base class.
+     *
+     * @var array
+     * @see Smarty_Internal_CompileBase
+     */
+    public $required_attributes = array('name');
+    /**
+     * Attribute definition: Overwrites base class.
+     *
+     * @var array
+     * @see Smarty_Internal_CompileBase
+     */
+    public $shorttag_order = array('name');
+    /**
+     * Attribute definition: Overwrites base class.
+     *
+     * @var array
+     * @see Smarty_Internal_CompileBase
+     */
+    public $optional_attributes = array('_any');
+
+    /**
+     * Compiles code for the {function} tag
+     *
+     * @param  array   $args      array with attributes from parser
+     * @param  object  $compiler  compiler object
+     * @param  array   $parameter array with compilation parameter
+     * @return boolean true
+     */
+    public function compile($args, $compiler, $parameter)
+    {
+        // check and get attributes
+        $_attr = $this->getAttributes($compiler, $args);
+
+        if ($_attr['nocache'] === true) {
+            $compiler->trigger_template_error('nocache option not allowed', $compiler->lex->taglineno);
+        }
+        unset($_attr['nocache']);
+        $save = array($_attr, $compiler->parser->current_buffer,
+            $compiler->template->has_nocache_code, $compiler->template->required_plugins);
+        $this->openTag($compiler, 'function', $save);
+        $_name = trim($_attr['name'], "'\"");
+        unset($_attr['name']);
+        // set flag that we are compiling a template function
+        $compiler->compiles_template_function = true;
+        $compiler->template->properties['function'][$_name]['parameter'] = array();
+        $_smarty_tpl = $compiler->template;
+        foreach ($_attr as $_key => $_data) {
+            eval ('$tmp='.$_data.';');
+            $compiler->template->properties['function'][$_name]['parameter'][$_key] = $tmp;
+        }
+        $compiler->smarty->template_functions[$_name]['parameter'] = $compiler->template->properties['function'][$_name]['parameter'];
+        if ($compiler->template->caching) {
+            $output = '';
+        } else {
+            $output = "<?php if (!function_exists('smarty_template_function_{$_name}')) {
+    function smarty_template_function_{$_name}(\$_smarty_tpl,\$params) {
+    \$saved_tpl_vars = \$_smarty_tpl->tpl_vars;
+    foreach (\$_smarty_tpl->smarty->template_functions['{$_name}']['parameter'] as \$key => \$value) {\$_smarty_tpl->tpl_vars[\$key] = new Smarty_variable(\$value);};
+    foreach (\$params as \$key => \$value) {\$_smarty_tpl->tpl_vars[\$key] = new Smarty_variable(\$value);}?>";
+        }
+        // Init temporay context
+        $compiler->template->required_plugins = array('compiled' => array(), 'nocache' => array());
+        $compiler->parser->current_buffer = new _smarty_template_buffer($compiler->parser);
+        $compiler->parser->current_buffer->append_subtree(new _smarty_tag($compiler->parser, $output));
+        $compiler->template->has_nocache_code = false;
+        $compiler->has_code = false;
+        $compiler->template->properties['function'][$_name]['compiled'] = '';
+        return true;
+    }
+
+}
+
+/**
+ * Smarty Internal Plugin Compile Functionclose Class
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ */
+class Smarty_Internal_Compile_Functionclose extends Smarty_Internal_CompileBase
+{
+    /**
+     * Compiles code for the {/function} tag
+     *
+     * @param  array   $args      array with attributes from parser
+     * @param  object  $compiler  compiler object
+     * @param  array   $parameter array with compilation parameter
+     * @return boolean true
+     */
+    public function compile($args, $compiler, $parameter)
+    {
+        $_attr = $this->getAttributes($compiler, $args);
+        $saved_data = $this->closeTag($compiler, array('function'));
+        $_name = trim($saved_data[0]['name'], "'\"");
+        // build plugin include code
+        $plugins_string = '';
+        if (!empty($compiler->template->required_plugins['compiled'])) {
+            $plugins_string = '<?php ';
+            foreach ($compiler->template->required_plugins['compiled'] as $tmp) {
+                foreach ($tmp as $data) {
+                    $plugins_string .= "if (!is_callable('{$data['function']}')) include '{$data['file']}';\n";
+                }
+            }
+            $plugins_string .= '?>';
+        }
+        if (!empty($compiler->template->required_plugins['nocache'])) {
+            $plugins_string .= "<?php echo '/*%%SmartyNocache:{$compiler->template->properties['nocache_hash']}%%*/<?php ";
+            foreach ($compiler->template->required_plugins['nocache'] as $tmp) {
+                foreach ($tmp as $data) {
+                    $plugins_string .= "if (!is_callable(\'{$data['function']}\')) include \'{$data['file']}\';\n";
+                }
+            }
+            $plugins_string .= "?>/*/%%SmartyNocache:{$compiler->template->properties['nocache_hash']}%%*/';?>\n";
+        }
+         // remove last line break from function definition
+         $last = count($compiler->parser->current_buffer->subtrees) - 1;
+         if ($compiler->parser->current_buffer->subtrees[$last] instanceof _smarty_linebreak) {
+             unset($compiler->parser->current_buffer->subtrees[$last]);
+         }
+        // if caching save template function for possible nocache call
+        if ($compiler->template->caching) {
+            $compiler->template->properties['function'][$_name]['compiled'] .= $plugins_string
+             . $compiler->parser->current_buffer->to_smarty_php();
+            $compiler->template->properties['function'][$_name]['nocache_hash'] = $compiler->template->properties['nocache_hash'];
+            $compiler->template->properties['function'][$_name]['has_nocache_code'] = $compiler->template->has_nocache_code;
+            $compiler->template->properties['function'][$_name]['called_functions'] = $compiler->called_functions;
+            $compiler->called_functions = array();
+            $compiler->smarty->template_functions[$_name] = $compiler->template->properties['function'][$_name];
+            $compiler->has_code = false;
+            $output = true;
+        } else {
+            $output = $plugins_string . $compiler->parser->current_buffer->to_smarty_php() . "<?php \$_smarty_tpl->tpl_vars = \$saved_tpl_vars;
+foreach (Smarty::\$global_tpl_vars as \$key => \$value) if(!isset(\$_smarty_tpl->tpl_vars[\$key])) \$_smarty_tpl->tpl_vars[\$key] = \$value;}}?>\n";
+        }
+        // reset flag that we are compiling a template function
+        $compiler->compiles_template_function = false;
+        // restore old compiler status
+        $compiler->parser->current_buffer = $saved_data[1];
+        $compiler->template->has_nocache_code = $compiler->template->has_nocache_code | $saved_data[2];
+        $compiler->template->required_plugins = $saved_data[3];
+
+        return $output;
+    }
+
+}

resources/templates/engine/smarty/sysplugins/smarty_internal_compile_if.php

@@ -0,0 +1,210 @@
+<?php
+/**
+* Smarty Internal Plugin Compile If
+*
+* Compiles the {if} {else} {elseif} {/if} tags
+*
+* @package Smarty
+* @subpackage Compiler
+* @author Uwe Tews
+*/
+
+/**
+* Smarty Internal Plugin Compile If Class
+*
+* @package Smarty
+* @subpackage Compiler
+*/
+class Smarty_Internal_Compile_If extends Smarty_Internal_CompileBase
+{
+    /**
+    * Compiles code for the {if} tag
+    *
+    * @param array  $args       array with attributes from parser
+    * @param object $compiler   compiler object
+    * @param array  $parameter  array with compilation parameter
+    * @return string compiled code
+    */
+    public function compile($args, $compiler, $parameter)
+    {
+        // check and get attributes
+        $_attr = $this->getAttributes($compiler, $args);
+        $this->openTag($compiler, 'if', array(1, $compiler->nocache));
+        // must whole block be nocache ?
+        $compiler->nocache = $compiler->nocache | $compiler->tag_nocache;
+
+        if (!array_key_exists("if condition",$parameter)) {
+            $compiler->trigger_template_error("missing if condition", $compiler->lex->taglineno);
+        }
+
+        if (is_array($parameter['if condition'])) {
+            if ($compiler->nocache) {
+                $_nocache = ',true';
+                // create nocache var to make it know for further compiling
+                if (is_array($parameter['if condition']['var'])) {
+                    $compiler->template->tpl_vars[trim($parameter['if condition']['var']['var'], "'")] = new Smarty_variable(null, true);
+                } else {
+                    $compiler->template->tpl_vars[trim($parameter['if condition']['var'], "'")] = new Smarty_variable(null, true);
+                }
+            } else {
+                $_nocache = '';
+            }
+            if (is_array($parameter['if condition']['var'])) {
+                $_output = "<?php if (!isset(\$_smarty_tpl->tpl_vars[".$parameter['if condition']['var']['var']."]) || !is_array(\$_smarty_tpl->tpl_vars[".$parameter['if condition']['var']['var']."]->value)) \$_smarty_tpl->createLocalArrayVariable(".$parameter['if condition']['var']['var']."$_nocache);\n";
+                $_output .= "if (\$_smarty_tpl->tpl_vars[".$parameter['if condition']['var']['var']."]->value".$parameter['if condition']['var']['smarty_internal_index']." = ".$parameter['if condition']['value'].") {?>";
+            } else {
+                $_output = "<?php if (!isset(\$_smarty_tpl->tpl_vars[".$parameter['if condition']['var']."])) \$_smarty_tpl->tpl_vars[".$parameter['if condition']['var']."] = new Smarty_Variable(null{$_nocache});";
+                $_output .= "if (\$_smarty_tpl->tpl_vars[".$parameter['if condition']['var']."]->value = ".$parameter['if condition']['value'].") {?>";
+            }
+
+            return $_output;
+        } else {
+            return "<?php if ({$parameter['if condition']}) {?>";
+        }
+    }
+
+}
+
+/**
+* Smarty Internal Plugin Compile Else Class
+*
+* @package Smarty
+* @subpackage Compiler
+*/
+class Smarty_Internal_Compile_Else extends Smarty_Internal_CompileBase
+{
+    /**
+    * Compiles code for the {else} tag
+    *
+    * @param array  $args       array with attributes from parser
+    * @param object $compiler   compiler object
+    * @param array  $parameter  array with compilation parameter
+    * @return string compiled code
+    */
+    public function compile($args, $compiler, $parameter)
+    {
+        list($nesting, $compiler->tag_nocache) = $this->closeTag($compiler, array('if', 'elseif'));
+        $this->openTag($compiler, 'else', array($nesting, $compiler->tag_nocache));
+
+        return "<?php } else { ?>";
+    }
+
+}
+
+/**
+* Smarty Internal Plugin Compile ElseIf Class
+*
+* @package Smarty
+* @subpackage Compiler
+*/
+class Smarty_Internal_Compile_Elseif extends Smarty_Internal_CompileBase
+{
+    /**
+    * Compiles code for the {elseif} tag
+    *
+    * @param array  $args       array with attributes from parser
+    * @param object $compiler   compiler object
+    * @param array  $parameter  array with compilation parameter
+    * @return string compiled code
+    */
+    public function compile($args, $compiler, $parameter)
+    {
+        // check and get attributes
+        $_attr = $this->getAttributes($compiler, $args);
+
+        list($nesting, $compiler->tag_nocache) = $this->closeTag($compiler, array('if', 'elseif'));
+
+        if (!array_key_exists("if condition",$parameter)) {
+            $compiler->trigger_template_error("missing elseif condition", $compiler->lex->taglineno);
+        }
+
+        if (is_array($parameter['if condition'])) {
+            $condition_by_assign = true;
+            if ($compiler->nocache) {
+                $_nocache = ',true';
+                // create nocache var to make it know for further compiling
+                if (is_array($parameter['if condition']['var'])) {
+                    $compiler->template->tpl_vars[trim($parameter['if condition']['var']['var'], "'")] = new Smarty_variable(null, true);
+                } else {
+                    $compiler->template->tpl_vars[trim($parameter['if condition']['var'], "'")] = new Smarty_variable(null, true);
+                }
+            } else {
+                $_nocache = '';
+            }
+        } else {
+            $condition_by_assign = false;
+        }
+
+        if (empty($compiler->prefix_code)) {
+            if ($condition_by_assign) {
+                $this->openTag($compiler, 'elseif', array($nesting + 1, $compiler->tag_nocache));
+                if (is_array($parameter['if condition']['var'])) {
+                    $_output = "<?php } else { if (!isset(\$_smarty_tpl->tpl_vars[" . $parameter['if condition']['var']['var'] . "]) || !is_array(\$_smarty_tpl->tpl_vars[" . $parameter['if condition']['var']['var'] . "]->value)) \$_smarty_tpl->createLocalArrayVariable(" . $parameter['if condition']['var']['var'] . "$_nocache);\n";
+                    $_output .= "if (\$_smarty_tpl->tpl_vars[" . $parameter['if condition']['var']['var'] . "]->value" . $parameter['if condition']['var']['smarty_internal_index'] . " = " . $parameter['if condition']['value'] . ") {?>";
+                } else {
+                    $_output = "<?php  } else { if (!isset(\$_smarty_tpl->tpl_vars[" . $parameter['if condition']['var'] . "])) \$_smarty_tpl->tpl_vars[" . $parameter['if condition']['var'] . "] = new Smarty_Variable(null{$_nocache});";
+                    $_output .= "if (\$_smarty_tpl->tpl_vars[" . $parameter['if condition']['var'] . "]->value = " . $parameter['if condition']['value'] . ") {?>";
+                }
+
+                return $_output;
+            } else {
+                $this->openTag($compiler, 'elseif', array($nesting, $compiler->tag_nocache));
+
+                return "<?php } elseif ({$parameter['if condition']}) {?>";
+            }
+        } else {
+            $tmp = '';
+            foreach ($compiler->prefix_code as $code)
+            $tmp .= $code;
+            $compiler->prefix_code = array();
+            $this->openTag($compiler, 'elseif', array($nesting + 1, $compiler->tag_nocache));
+            if ($condition_by_assign) {
+                if (is_array($parameter['if condition']['var'])) {
+                    $_output = "<?php } else {?>{$tmp}<?php  if (!isset(\$_smarty_tpl->tpl_vars[" . $parameter['if condition']['var']['var'] . "]) || !is_array(\$_smarty_tpl->tpl_vars[" . $parameter['if condition']['var']['var'] . "]->value)) \$_smarty_tpl->createLocalArrayVariable(" . $parameter['if condition']['var']['var'] . "$_nocache);\n";
+                    $_output .= "if (\$_smarty_tpl->tpl_vars[" . $parameter['if condition']['var']['var'] . "]->value" . $parameter['if condition']['var']['smarty_internal_index'] . " = " . $parameter['if condition']['value'] . ") {?>";
+                } else {
+                    $_output = "<?php } else {?>{$tmp}<?php if (!isset(\$_smarty_tpl->tpl_vars[" . $parameter['if condition']['var'] . "])) \$_smarty_tpl->tpl_vars[" . $parameter['if condition']['var'] . "] = new Smarty_Variable(null{$_nocache});";
+                    $_output .= "if (\$_smarty_tpl->tpl_vars[" . $parameter['if condition']['var'] . "]->value = " . $parameter['if condition']['value'] . ") {?>";
+                }
+
+                return $_output;
+            } else {
+                return "<?php } else {?>{$tmp}<?php if ({$parameter['if condition']}) {?>";
+            }
+        }
+    }
+
+}
+
+/**
+* Smarty Internal Plugin Compile Ifclose Class
+*
+* @package Smarty
+* @subpackage Compiler
+*/
+class Smarty_Internal_Compile_Ifclose extends Smarty_Internal_CompileBase
+{
+    /**
+    * Compiles code for the {/if} tag
+    *
+    * @param array  $args       array with attributes from parser
+    * @param object $compiler   compiler object
+    * @param array  $parameter  array with compilation parameter
+    * @return string compiled code
+    */
+    public function compile($args, $compiler, $parameter)
+    {
+        // must endblock be nocache?
+        if ($compiler->nocache) {
+            $compiler->tag_nocache = true;
+        }
+        list($nesting, $compiler->nocache) = $this->closeTag($compiler, array('if', 'else', 'elseif'));
+        $tmp = '';
+        for ($i = 0; $i < $nesting; $i++) {
+            $tmp .= '}';
+        }
+
+        return "<?php {$tmp}?>";
+    }
+
+}

resources/templates/engine/smarty/sysplugins/smarty_internal_compile_include.php

@@ -0,0 +1,255 @@
+<?php
+/**
+ * Smarty Internal Plugin Compile Include
+ *
+ * Compiles the {include} tag
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ * @author Uwe Tews
+ */
+
+/**
+ * Smarty Internal Plugin Compile Include Class
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ */
+class Smarty_Internal_Compile_Include extends Smarty_Internal_CompileBase
+{
+    /**
+     * caching mode to create nocache code but no cache file
+     */
+    const CACHING_NOCACHE_CODE = 9999;
+    /**
+     * Attribute definition: Overwrites base class.
+     *
+     * @var array
+     * @see Smarty_Internal_CompileBase
+     */
+    public $required_attributes = array('file');
+    /**
+     * Attribute definition: Overwrites base class.
+     *
+     * @var array
+     * @see Smarty_Internal_CompileBase
+     */
+    public $shorttag_order = array('file');
+    /**
+     * Attribute definition: Overwrites base class.
+     *
+     * @var array
+     * @see Smarty_Internal_CompileBase
+     */
+    public $option_flags = array('nocache', 'inline', 'caching');
+    /**
+     * Attribute definition: Overwrites base class.
+     *
+     * @var array
+     * @see Smarty_Internal_CompileBase
+     */
+    public $optional_attributes = array('_any');
+
+    /**
+     * Compiles code for the {include} tag
+     *
+     * @param  array $args      array with attributes from parser
+     * @param  object $compiler  compiler object
+     * @param  array $parameter array with compilation parameter
+     * @return string compiled code
+     */
+    public function compile($args, $compiler, $parameter)
+    {
+        // check and get attributes
+        $_attr = $this->getAttributes($compiler, $args);
+        // save posible attributes
+        $include_file = $_attr['file'];
+
+        if (isset($_attr['assign'])) {
+            // output will be stored in a smarty variable instead of beind displayed
+            $_assign = $_attr['assign'];
+        }
+
+        $_parent_scope = Smarty::SCOPE_LOCAL;
+        if (isset($_attr['scope'])) {
+            $_attr['scope'] = trim($_attr['scope'], "'\"");
+            if ($_attr['scope'] == 'parent') {
+                $_parent_scope = Smarty::SCOPE_PARENT;
+            } elseif ($_attr['scope'] == 'root') {
+                $_parent_scope = Smarty::SCOPE_ROOT;
+            } elseif ($_attr['scope'] == 'global') {
+                $_parent_scope = Smarty::SCOPE_GLOBAL;
+            }
+        }
+        
+        $_caching = Smarty::CACHING_OFF;
+
+        // flag if included template code should be merged into caller
+        $merge_compiled_includes = ($compiler->smarty->merge_compiled_includes || $_attr['inline'] === true) && !$compiler->template->source->recompiled;
+
+        // set default when in nocache mode
+//       if ($compiler->template->caching && ($compiler->nocache || $compiler->tag_nocache || $compiler->forceNocache == 2)) {
+        if ($compiler->template->caching && ((!$compiler->inheritance && !$compiler->nocache && !$compiler->tag_nocache) || ($compiler->inheritance && ($compiler->nocache ||$compiler->tag_nocache)))) {
+            $_caching = self::CACHING_NOCACHE_CODE;
+        }
+        /*
+        * if the {include} tag provides individual parameter for caching
+        * it will not be included into the common cache file and treated like
+        * a nocache section
+        */
+        if (isset($_attr['cache_lifetime'])) {
+            $_cache_lifetime = $_attr['cache_lifetime'];
+            $compiler->tag_nocache = true;
+            $_caching = Smarty::CACHING_LIFETIME_CURRENT;
+        } else {
+            $_cache_lifetime = 'null';
+        }
+        if (isset($_attr['cache_id'])) {
+            $_cache_id = $_attr['cache_id'];
+            $compiler->tag_nocache = true;
+            $_caching = Smarty::CACHING_LIFETIME_CURRENT;
+        } else {
+            $_cache_id = '$_smarty_tpl->cache_id';
+        }
+        if (isset($_attr['compile_id'])) {
+            $_compile_id = $_attr['compile_id'];
+        } else {
+            $_compile_id = '$_smarty_tpl->compile_id';
+        }
+        if ($_attr['caching'] === true) {
+            $_caching = Smarty::CACHING_LIFETIME_CURRENT;
+        }
+        if ($_attr['nocache'] === true) {
+            $compiler->tag_nocache = true;
+            if ($merge_compiled_includes || $compiler->inheritance) {
+            $_caching = self::CACHING_NOCACHE_CODE;
+            } else {
+            $_caching = Smarty::CACHING_OFF;
+            }
+        }
+
+        $has_compiled_template = false;
+        if ($merge_compiled_includes || $compiler->inheritance) {
+            // variable template name ?
+            if ($compiler->has_variable_string || !((substr_count($include_file, '"') == 2 || substr_count($include_file, "'") == 2))
+                || substr_count($include_file, '(') != 0 || substr_count($include_file, '$_smarty_tpl->') != 0
+            ) {
+                $merge_compiled_includes = false;
+                if ($compiler->inheritance) {
+                    $compiler->trigger_template_error(' variable template file names not allow within {block} tags');
+                }
+            }
+            // variable compile_id?
+            if (isset($_attr['compile_id'])) {
+                if (!((substr_count($_attr['compile_id'], '"') == 2 || substr_count($_attr['compile_id'], "'") == 2))
+                    || substr_count($_attr['compile_id'], '(') != 0 || substr_count($_attr['compile_id'], '$_smarty_tpl->') != 0
+                ) {
+                    $merge_compiled_includes = false;
+                    if ($compiler->inheritance) {
+                        $compiler->trigger_template_error(' variable compile_id not allow within {block} tags');
+                    }
+                }
+            }
+            if ($compiler->template->caching && ($compiler->tag_nocache || $compiler->nocache) && $_caching != self::CACHING_NOCACHE_CODE) {
+                $merge_compiled_includes = false;
+                if ($compiler->inheritance) {
+                    $compiler->trigger_template_error(' invalid caching mode of subtemplate within {block} tags');
+                }
+            }
+        }
+        if ($merge_compiled_includes || $compiler->inheritance) {
+            // we must observe different compile_id
+            $uid = sha1($_compile_id);
+            $tpl_name = null;
+            $nocache = false;
+            eval("\$tpl_name = $include_file;");
+            if (!isset($compiler->smarty->merged_templates_func[$tpl_name][$uid]) || $compiler->inheritance) {
+                $tpl = new $compiler->smarty->template_class ($tpl_name, $compiler->smarty, $compiler->template, $compiler->template->cache_id, $compiler->template->compile_id);
+                // save unique function name
+                $compiler->smarty->merged_templates_func[$tpl_name][$uid]['func'] = $tpl->properties['unifunc'] = 'content_' . str_replace('.', '_', uniqid('', true));
+                // use current nocache hash for inlined code
+                $compiler->smarty->merged_templates_func[$tpl_name][$uid]['nocache_hash'] = $tpl->properties['nocache_hash'] = $compiler->template->properties['nocache_hash'];
+                if ($compiler->template->caching && $_caching == self::CACHING_NOCACHE_CODE) {
+                    // all code must be nocache
+                    $nocache = true;
+                }
+                if ($compiler->inheritance) {
+                    $tpl->compiler->inheritance = true;
+                }
+                // make sure whole chain gets compiled
+                $tpl->mustCompile = true;
+                if (!($tpl->source->uncompiled) && $tpl->source->exists) {
+
+
+                    // get compiled code
+                    $compiled_code = $tpl->compiler->compileTemplate($tpl, $nocache);
+                    // release compiler object to free memory
+                    unset($tpl->compiler);
+                    // merge compiled code for {function} tags
+                    $compiler->template->properties['function'] = array_merge($compiler->template->properties['function'], $tpl->properties['function']);
+                    // merge filedependency
+                    $tpl->properties['file_dependency'][$tpl->source->uid] = array($tpl->source->filepath, $tpl->source->timestamp, $tpl->source->type);
+                    $compiler->template->properties['file_dependency'] = array_merge($compiler->template->properties['file_dependency'], $tpl->properties['file_dependency']);
+                    // remove header code
+                    $compiled_code = preg_replace("/(<\?php \/\*%%SmartyHeaderCode:{$tpl->properties['nocache_hash']}%%\*\/(.+?)\/\*\/%%SmartyHeaderCode%%\*\/\?>\n)/s", '', $compiled_code);
+                    if ($tpl->has_nocache_code) {
+                        // replace nocache_hash
+                        $compiled_code = str_replace("{$tpl->properties['nocache_hash']}", $compiler->template->properties['nocache_hash'], $compiled_code);
+                        $compiler->template->has_nocache_code = true;
+                    }
+                    $compiler->merged_templates[$tpl->properties['unifunc']] = $compiled_code;
+                    $has_compiled_template = true;
+                    unset ($tpl);
+                }
+            } else {
+                $has_compiled_template = true;
+            }
+        }
+        // delete {include} standard attributes
+        unset($_attr['file'], $_attr['assign'], $_attr['cache_id'], $_attr['compile_id'], $_attr['cache_lifetime'], $_attr['nocache'], $_attr['caching'], $_attr['scope'], $_attr['inline']);
+        // remaining attributes must be assigned as smarty variable
+        if (!empty($_attr)) {
+            if ($_parent_scope == Smarty::SCOPE_LOCAL) {
+                // create variables
+                foreach ($_attr as $key => $value) {
+                    $_pairs[] = "'$key'=>$value";
+                }
+                $_vars = 'array(' . join(',', $_pairs) . ')';
+                $_has_vars = true;
+            } else {
+                $compiler->trigger_template_error('variable passing not allowed in parent/global scope', $compiler->lex->taglineno);
+            }
+        } else {
+            $_vars = 'array()';
+            $_has_vars = false;
+        }
+        if ($has_compiled_template) {
+            // never call inline templates in nocache mode
+            $compiler->suppressNocacheProcessing = true;
+            $_hash = $compiler->smarty->merged_templates_func[$tpl_name][$uid]['nocache_hash'];
+            $_output = "<?php /*  Call merged included template \"" . $tpl_name . "\" */\n";
+            $_output .= "\$_tpl_stack[] = \$_smarty_tpl;\n";
+            $_output .= " \$_smarty_tpl = \$_smarty_tpl->setupInlineSubTemplate($include_file, $_cache_id, $_compile_id, $_caching, $_cache_lifetime, $_vars, $_parent_scope, '$_hash');\n";
+            if (isset($_assign)) {
+                $_output .= 'ob_start(); ';
+            }
+            $_output .= $compiler->smarty->merged_templates_func[$tpl_name][$uid]['func'] . "(\$_smarty_tpl);\n";
+            $_output .= "\$_smarty_tpl = array_pop(\$_tpl_stack); ";
+            if (isset($_assign)) {
+                $_output .= " \$_smarty_tpl->tpl_vars[$_assign] = new Smarty_variable(ob_get_clean());";
+            }
+            $_output .= "\n/*  End of included template \"" . $tpl_name . "\" */?>";
+
+            return $_output;
+        }
+
+        // was there an assign attribute
+        if (isset($_assign)) {
+            $_output = "<?php \$_smarty_tpl->tpl_vars[$_assign] = new Smarty_variable(\$_smarty_tpl->getSubTemplate ($include_file, $_cache_id, $_compile_id, $_caching, $_cache_lifetime, $_vars, $_parent_scope));?>\n";;
+        } else {
+            $_output = "<?php echo \$_smarty_tpl->getSubTemplate ($include_file, $_cache_id, $_compile_id, $_caching, $_cache_lifetime, $_vars, $_parent_scope);?>\n";
+        }
+
+        return $_output;
+    }
+}

resources/templates/engine/smarty/sysplugins/smarty_internal_compile_include_php.php

@@ -0,0 +1,106 @@
+<?php
+/**
+ * Smarty Internal Plugin Compile Include PHP
+ *
+ * Compiles the {include_php} tag
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ * @author Uwe Tews
+ */
+
+/**
+ * Smarty Internal Plugin Compile Insert Class
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ */
+class Smarty_Internal_Compile_Include_Php extends Smarty_Internal_CompileBase
+{
+    /**
+     * Attribute definition: Overwrites base class.
+     *
+     * @var array
+     * @see Smarty_Internal_CompileBase
+     */
+    public $required_attributes = array('file');
+    /**
+     * Attribute definition: Overwrites base class.
+     *
+     * @var array
+     * @see Smarty_Internal_CompileBase
+     */
+    public $shorttag_order = array('file');
+    /**
+     * Attribute definition: Overwrites base class.
+     *
+     * @var array
+     * @see Smarty_Internal_CompileBase
+     */
+    public $optional_attributes = array('once', 'assign');
+
+    /**
+     * Compiles code for the {include_php} tag
+     *
+     * @param  array  $args     array with attributes from parser
+     * @param  object $compiler compiler object
+     * @return string compiled code
+     */
+    public function compile($args, $compiler)
+    {
+        if (!($compiler->smarty instanceof SmartyBC)) {
+            throw new SmartyException("{include_php} is deprecated, use SmartyBC class to enable");
+        }
+        // check and get attributes
+        $_attr = $this->getAttributes($compiler, $args);
+
+        $_output = '<?php ';
+
+        $_smarty_tpl = $compiler->template;
+        $_filepath = false;
+        eval('$_file = ' . $_attr['file'] . ';');
+        if (!isset($compiler->smarty->security_policy) && file_exists($_file)) {
+            $_filepath = $_file;
+        } else {
+            if (isset($compiler->smarty->security_policy)) {
+                $_dir = $compiler->smarty->security_policy->trusted_dir;
+            } else {
+                $_dir = $compiler->smarty->trusted_dir;
+            }
+            if (!empty($_dir)) {
+                foreach ((array) $_dir as $_script_dir) {
+                    $_script_dir = rtrim($_script_dir, '/\\') . DS;
+                    if (file_exists($_script_dir . $_file)) {
+                        $_filepath = $_script_dir .  $_file;
+                        break;
+                    }
+                }
+            }
+        }
+        if ($_filepath == false) {
+            $compiler->trigger_template_error("{include_php} file '{$_file}' is not readable", $compiler->lex->taglineno);
+        }
+
+        if (isset($compiler->smarty->security_policy)) {
+            $compiler->smarty->security_policy->isTrustedPHPDir($_filepath);
+        }
+
+        if (isset($_attr['assign'])) {
+            // output will be stored in a smarty variable instead of being displayed
+            $_assign = $_attr['assign'];
+        }
+        $_once = '_once';
+        if (isset($_attr['once'])) {
+            if ($_attr['once'] == 'false') {
+                $_once = '';
+            }
+        }
+
+        if (isset($_assign)) {
+            return "<?php ob_start(); include{$_once} ('{$_filepath}'); \$_smarty_tpl->assign({$_assign},ob_get_contents()); ob_end_clean();?>";
+        } else {
+            return "<?php include{$_once} ('{$_filepath}');?>\n";
+        }
+    }
+
+}

resources/templates/engine/smarty/sysplugins/smarty_internal_compile_insert.php

@@ -0,0 +1,141 @@
+<?php
+
+/**
+ * Smarty Internal Plugin Compile Insert
+ *
+ * Compiles the {insert} tag
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ * @author Uwe Tews
+ */
+
+/**
+ * Smarty Internal Plugin Compile Insert Class
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ */
+class Smarty_Internal_Compile_Insert extends Smarty_Internal_CompileBase
+{
+    /**
+     * Attribute definition: Overwrites base class.
+     *
+     * @var array
+     * @see Smarty_Internal_CompileBase
+     */
+    public $required_attributes = array('name');
+    /**
+     * Attribute definition: Overwrites base class.
+     *
+     * @var array
+     * @see Smarty_Internal_CompileBase
+     */
+    public $shorttag_order = array('name');
+    /**
+     * Attribute definition: Overwrites base class.
+     *
+     * @var array
+     * @see Smarty_Internal_CompileBase
+     */
+    public $optional_attributes = array('_any');
+
+    /**
+     * Compiles code for the {insert} tag
+     *
+     * @param  array  $args     array with attributes from parser
+     * @param  object $compiler compiler object
+     * @return string compiled code
+     */
+    public function compile($args, $compiler)
+    {
+        // check and get attributes
+        $_attr = $this->getAttributes($compiler, $args);
+        // never compile as nocache code
+        $compiler->suppressNocacheProcessing = true;
+        $compiler->tag_nocache = true;
+        $_smarty_tpl = $compiler->template;
+        $_name = null;
+        $_script = null;
+
+        $_output = '<?php ';
+        // save posible attributes
+        eval('$_name = ' . $_attr['name'] . ';');
+        if (isset($_attr['assign'])) {
+            // output will be stored in a smarty variable instead of being displayed
+            $_assign = $_attr['assign'];
+            // create variable to make shure that the compiler knows about its nocache status
+            $compiler->template->tpl_vars[trim($_attr['assign'], "'")] = new Smarty_Variable(null, true);
+        }
+        if (isset($_attr['script'])) {
+            // script which must be included
+            $_function = "smarty_insert_{$_name}";
+            $_smarty_tpl = $compiler->template;
+            $_filepath = false;
+            eval('$_script = ' . $_attr['script'] . ';');
+            if (!isset($compiler->smarty->security_policy) && file_exists($_script)) {
+                $_filepath = $_script;
+            } else {
+                if (isset($compiler->smarty->security_policy)) {
+                    $_dir = $compiler->smarty->security_policy->trusted_dir;
+                } else {
+                    $_dir = $compiler->smarty->trusted_dir;
+                }
+                if (!empty($_dir)) {
+                    foreach ((array) $_dir as $_script_dir) {
+                        $_script_dir = rtrim($_script_dir, '/\\') . DS;
+                        if (file_exists($_script_dir . $_script)) {
+                            $_filepath = $_script_dir . $_script;
+                            break;
+                        }
+                    }
+                }
+            }
+            if ($_filepath == false) {
+                $compiler->trigger_template_error("{insert} missing script file '{$_script}'", $compiler->lex->taglineno);
+            }
+            // code for script file loading
+            $_output .= "require_once '{$_filepath}' ;";
+            require_once $_filepath;
+            if (!is_callable($_function)) {
+                $compiler->trigger_template_error(" {insert} function '{$_function}' is not callable in script file '{$_script}'", $compiler->lex->taglineno);
+            }
+        } else {
+            $_filepath = 'null';
+            $_function = "insert_{$_name}";
+            // function in PHP script ?
+            if (!is_callable($_function)) {
+                // try plugin
+                if (!$_function = $compiler->getPlugin($_name, 'insert')) {
+                    $compiler->trigger_template_error("{insert} no function or plugin found for '{$_name}'", $compiler->lex->taglineno);
+                }
+            }
+        }
+        // delete {insert} standard attributes
+        unset($_attr['name'], $_attr['assign'], $_attr['script'], $_attr['nocache']);
+        // convert attributes into parameter array string
+        $_paramsArray = array();
+        foreach ($_attr as $_key => $_value) {
+            $_paramsArray[] = "'$_key' => $_value";
+        }
+        $_params = 'array(' . implode(", ", $_paramsArray) . ')';
+        // call insert
+        if (isset($_assign)) {
+            if ($_smarty_tpl->caching) {
+                $_output .= "echo Smarty_Internal_Nocache_Insert::compile ('{$_function}',{$_params}, \$_smarty_tpl, '{$_filepath}',{$_assign});?>";
+            } else {
+                $_output .= "\$_smarty_tpl->assign({$_assign} , {$_function} ({$_params},\$_smarty_tpl), true);?>";
+            }
+        } else {
+            $compiler->has_output = true;
+            if ($_smarty_tpl->caching) {
+                $_output .= "echo Smarty_Internal_Nocache_Insert::compile ('{$_function}',{$_params}, \$_smarty_tpl, '{$_filepath}');?>";
+            } else {
+                $_output .= "echo {$_function}({$_params},\$_smarty_tpl);?>";
+            }
+        }
+
+        return $_output;
+    }
+
+}

resources/templates/engine/smarty/sysplugins/smarty_internal_compile_ldelim.php

@@ -0,0 +1,40 @@
+<?php
+/**
+ * Smarty Internal Plugin Compile Ldelim
+ *
+ * Compiles the {ldelim} tag
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ * @author Uwe Tews
+ */
+
+/**
+ * Smarty Internal Plugin Compile Ldelim Class
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ */
+class Smarty_Internal_Compile_Ldelim extends Smarty_Internal_CompileBase
+{
+    /**
+     * Compiles code for the {ldelim} tag
+     *
+     * This tag does output the left delimiter
+     * @param  array  $args     array with attributes from parser
+     * @param  object $compiler compiler object
+     * @return string compiled code
+     */
+    public function compile($args, $compiler)
+    {
+        $_attr = $this->getAttributes($compiler, $args);
+        if ($_attr['nocache'] === true) {
+            $compiler->trigger_template_error('nocache option not allowed', $compiler->lex->taglineno);
+        }
+        // this tag does not return compiled code
+        $compiler->has_code = true;
+
+        return $compiler->smarty->left_delimiter;
+    }
+
+}

resources/templates/engine/smarty/sysplugins/smarty_internal_compile_nocache.php

@@ -0,0 +1,78 @@
+<?php
+/**
+ * Smarty Internal Plugin Compile Nocache
+ *
+ * Compiles the {nocache} {/nocache} tags.
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ * @author Uwe Tews
+ */
+
+/**
+ * Smarty Internal Plugin Compile Nocache Classv
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ */
+class Smarty_Internal_Compile_Nocache extends Smarty_Internal_CompileBase
+{
+    /**
+     * Compiles code for the {nocache} tag
+     *
+     * This tag does not generate compiled output. It only sets a compiler flag.
+     *
+     * @param  array  $args     array with attributes from parser
+     * @param  object $compiler compiler object
+     * @return bool
+     */
+    public function compile($args, $compiler)
+    {
+        $_attr = $this->getAttributes($compiler, $args);
+        if ($_attr['nocache'] === true) {
+            $compiler->trigger_template_error('nocache option not allowed', $compiler->lex->taglineno);
+        }
+        if ($compiler->template->caching) {
+        // enter nocache mode
+        $this->openTag($compiler, 'nocache', $compiler->nocache);
+        $compiler->nocache = true;
+        }
+        // this tag does not return compiled code
+        $compiler->has_code = false;
+
+        return true;
+    }
+
+}
+
+/**
+ * Smarty Internal Plugin Compile Nocacheclose Class
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ */
+class Smarty_Internal_Compile_Nocacheclose extends Smarty_Internal_CompileBase
+{
+    /**
+     * Compiles code for the {/nocache} tag
+     *
+     * This tag does not generate compiled output. It only sets a compiler flag.
+     *
+     * @param  array  $args     array with attributes from parser
+     * @param  object $compiler compiler object
+     * @return bool
+     */
+    public function compile($args, $compiler)
+    {
+        $_attr = $this->getAttributes($compiler, $args);
+        if ($compiler->template->caching) {
+        // restore old nocache mode
+        $compiler->nocache = $this->closeTag($compiler, 'nocache');
+        }
+        // this tag does not return compiled code
+        $compiler->has_code = false;
+
+        return true;
+    }
+
+}

resources/templates/engine/smarty/sysplugins/smarty_internal_compile_private_block_plugin.php

@@ -0,0 +1,86 @@
+<?php
+/**
+ * Smarty Internal Plugin Compile Block Plugin
+ *
+ * Compiles code for the execution of block plugin
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ * @author Uwe Tews
+ */
+
+/**
+ * Smarty Internal Plugin Compile Block Plugin Class
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ */
+class Smarty_Internal_Compile_Private_Block_Plugin extends Smarty_Internal_CompileBase
+{
+    /**
+     * Attribute definition: Overwrites base class.
+     *
+     * @var array
+     * @see Smarty_Internal_CompileBase
+     */
+    public $optional_attributes = array('_any');
+
+    /**
+     * Compiles code for the execution of block plugin
+     *
+     * @param  array  $args      array with attributes from parser
+     * @param  object $compiler  compiler object
+     * @param  array  $parameter array with compilation parameter
+     * @param  string $tag       name of block plugin
+     * @param  string $function  PHP function name
+     * @return string compiled code
+     */
+    public function compile($args, $compiler, $parameter, $tag, $function)
+    {
+        if (!isset($tag[5]) || substr($tag, -5) != 'close') {
+            // opening tag of block plugin
+            // check and get attributes
+            $_attr = $this->getAttributes($compiler, $args);
+            if ($_attr['nocache'] === true) {
+                $compiler->tag_nocache = true;
+            }
+               unset($_attr['nocache']);
+            // convert attributes into parameter array string
+            $_paramsArray = array();
+            foreach ($_attr as $_key => $_value) {
+                if (is_int($_key)) {
+                    $_paramsArray[] = "$_key=>$_value";
+                } else {
+                    $_paramsArray[] = "'$_key'=>$_value";
+                }
+            }
+            $_params = 'array(' . implode(",", $_paramsArray) . ')';
+
+            $this->openTag($compiler, $tag, array($_params, $compiler->nocache));
+            // maybe nocache because of nocache variables or nocache plugin
+            $compiler->nocache = $compiler->nocache | $compiler->tag_nocache;
+            // compile code
+            $output = "<?php \$_smarty_tpl->smarty->_tag_stack[] = array('{$tag}', {$_params}); \$_block_repeat=true; echo {$function}({$_params}, null, \$_smarty_tpl, \$_block_repeat);while (\$_block_repeat) { ob_start();?>";
+        } else {
+            // must endblock be nocache?
+            if ($compiler->nocache) {
+                $compiler->tag_nocache = true;
+            }
+            // closing tag of block plugin, restore nocache
+            list($_params, $compiler->nocache) = $this->closeTag($compiler, substr($tag, 0, -5));
+            // This tag does create output
+            $compiler->has_output = true;
+            // compile code
+            if (!isset($parameter['modifier_list'])) {
+                $mod_pre = $mod_post ='';
+            } else {
+                $mod_pre = ' ob_start(); ';
+                $mod_post = 'echo '.$compiler->compileTag('private_modifier',array(),array('modifierlist'=>$parameter['modifier_list'],'value'=>'ob_get_clean()')).';';
+            }
+            $output = "<?php \$_block_content = ob_get_clean(); \$_block_repeat=false;".$mod_pre." echo {$function}({$_params}, \$_block_content, \$_smarty_tpl, \$_block_repeat); ".$mod_post." } array_pop(\$_smarty_tpl->smarty->_tag_stack);?>";
+        }
+
+        return $output . "\n";
+    }
+
+}

resources/templates/engine/smarty/sysplugins/smarty_internal_compile_private_function_plugin.php

@@ -0,0 +1,72 @@
+<?php
+/**
+ * Smarty Internal Plugin Compile Function Plugin
+ *
+ * Compiles code for the execution of function plugin
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ * @author Uwe Tews
+ */
+
+/**
+ * Smarty Internal Plugin Compile Function Plugin Class
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ */
+class Smarty_Internal_Compile_Private_Function_Plugin extends Smarty_Internal_CompileBase
+{
+    /**
+     * Attribute definition: Overwrites base class.
+     *
+     * @var array
+     * @see Smarty_Internal_CompileBase
+     */
+    public $required_attributes = array();
+    /**
+     * Attribute definition: Overwrites base class.
+     *
+     * @var array
+     * @see Smarty_Internal_CompileBase
+     */
+    public $optional_attributes = array('_any');
+
+    /**
+     * Compiles code for the execution of function plugin
+     *
+     * @param  array  $args      array with attributes from parser
+     * @param  object $compiler  compiler object
+     * @param  array  $parameter array with compilation parameter
+     * @param  string $tag       name of function plugin
+     * @param  string $function  PHP function name
+     * @return string compiled code
+     */
+    public function compile($args, $compiler, $parameter, $tag, $function)
+    {
+        // This tag does create output
+        $compiler->has_output = true;
+
+        // check and get attributes
+        $_attr = $this->getAttributes($compiler, $args);
+        if ($_attr['nocache'] === true) {
+            $compiler->tag_nocache = true;
+        }
+        unset($_attr['nocache']);
+        // convert attributes into parameter array string
+        $_paramsArray = array();
+        foreach ($_attr as $_key => $_value) {
+            if (is_int($_key)) {
+                $_paramsArray[] = "$_key=>$_value";
+            } else {
+                $_paramsArray[] = "'$_key'=>$_value";
+            }
+        }
+        $_params = 'array(' . implode(",", $_paramsArray) . ')';
+        // compile code
+        $output = "<?php echo {$function}({$_params},\$_smarty_tpl);?>\n";
+
+        return $output;
+    }
+
+}

resources/templates/engine/smarty/sysplugins/smarty_internal_compile_private_modifier.php

@@ -0,0 +1,140 @@
+<?php
+
+/**
+ * Smarty Internal Plugin Compile Modifier
+ *
+ * Compiles code for modifier execution
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ * @author Uwe Tews
+ */
+
+/**
+ * Smarty Internal Plugin Compile Modifier Class
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ */
+class Smarty_Internal_Compile_Private_Modifier extends Smarty_Internal_CompileBase
+{
+    /**
+     * Compiles code for modifier execution
+     *
+     * @param  array  $args      array with attributes from parser
+     * @param  object $compiler  compiler object
+     * @param  array  $parameter array with compilation parameter
+     * @return string compiled code
+     */
+    public function compile($args, $compiler, $parameter)
+    {
+        // check and get attributes
+        $_attr = $this->getAttributes($compiler, $args);
+        $output = $parameter['value'];
+        // loop over list of modifiers
+        foreach ($parameter['modifierlist'] as $single_modifier) {
+            $modifier = $single_modifier[0];
+            $single_modifier[0] = $output;
+            $params = implode(',', $single_modifier);
+            // check if we know already the type of modifier
+            if (isset($compiler->known_modifier_type[$modifier])) {
+                $modifier_types = array($compiler->known_modifier_type[$modifier]);
+            } else {
+                $modifier_types = array(1, 2, 3, 4, 5, 6);
+            }
+            foreach ($modifier_types as $type) {
+                switch ($type) {
+                    case 1:
+                        // registered modifier
+                        if (isset($compiler->smarty->registered_plugins[Smarty::PLUGIN_MODIFIER][$modifier])) {
+                            $function = $compiler->smarty->registered_plugins[Smarty::PLUGIN_MODIFIER][$modifier][0];
+                            if (!is_array($function)) {
+                                $output = "{$function}({$params})";
+                            } else {
+                                if (is_object($function[0])) {
+                                    $output = '$_smarty_tpl->smarty->registered_plugins[Smarty::PLUGIN_MODIFIER][\'' . $modifier . '\'][0][0]->' . $function[1] . '(' . $params . ')';
+                                } else {
+                                    $output = $function[0] . '::' . $function[1] . '(' . $params . ')';
+                                }
+                            }
+                            $compiler->known_modifier_type[$modifier] = $type;
+                            break 2;
+                        }
+                        break;
+                    case 2:
+                        // registered modifier compiler
+                        if (isset($compiler->smarty->registered_plugins[Smarty::PLUGIN_MODIFIERCOMPILER][$modifier][0])) {
+                            $output = call_user_func($compiler->smarty->registered_plugins[Smarty::PLUGIN_MODIFIERCOMPILER][$modifier][0], $single_modifier, $compiler->smarty);
+                            $compiler->known_modifier_type[$modifier] = $type;
+                            break 2;
+                        }
+                        break;
+                    case 3:
+                        // modifiercompiler plugin
+                        if ($compiler->smarty->loadPlugin('smarty_modifiercompiler_' . $modifier)) {
+                            // check if modifier allowed
+                            if (!is_object($compiler->smarty->security_policy) || $compiler->smarty->security_policy->isTrustedModifier($modifier, $compiler)) {
+                                $plugin = 'smarty_modifiercompiler_' . $modifier;
+                                $output = $plugin($single_modifier, $compiler);
+                            }
+                            $compiler->known_modifier_type[$modifier] = $type;
+                            break 2;
+                        }
+                        break;
+                    case 4:
+                        // modifier plugin
+                        if ($function = $compiler->getPlugin($modifier, Smarty::PLUGIN_MODIFIER)) {
+                            // check if modifier allowed
+                            if (!is_object($compiler->smarty->security_policy) || $compiler->smarty->security_policy->isTrustedModifier($modifier, $compiler)) {
+                                $output = "{$function}({$params})";
+                            }
+                            $compiler->known_modifier_type[$modifier] = $type;
+                            break 2;
+                        }
+                        break;
+                    case 5:
+                        // PHP function
+                        if (is_callable($modifier)) {
+                            // check if modifier allowed
+                            if (!is_object($compiler->smarty->security_policy) || $compiler->smarty->security_policy->isTrustedPhpModifier($modifier, $compiler)) {
+                                $output = "{$modifier}({$params})";
+                            }
+                            $compiler->known_modifier_type[$modifier] = $type;
+                            break 2;
+                        }
+                        break;
+                    case 6:
+                        // default plugin handler
+                        if (isset($compiler->default_handler_plugins[Smarty::PLUGIN_MODIFIER][$modifier]) || (is_callable($compiler->smarty->default_plugin_handler_func) && $compiler->getPluginFromDefaultHandler($modifier, Smarty::PLUGIN_MODIFIER))) {
+                            $function = $compiler->default_handler_plugins[Smarty::PLUGIN_MODIFIER][$modifier][0];
+                            // check if modifier allowed
+                            if (!is_object($compiler->smarty->security_policy) || $compiler->smarty->security_policy->isTrustedModifier($modifier, $compiler)) {
+                                if (!is_array($function)) {
+                                    $output = "{$function}({$params})";
+                                } else {
+                                    if (is_object($function[0])) {
+                                        $output = '$_smarty_tpl->smarty->registered_plugins[Smarty::PLUGIN_MODIFIER][\'' . $modifier . '\'][0][0]->' . $function[1] . '(' . $params . ')';
+                                    } else {
+                                        $output = $function[0] . '::' . $function[1] . '(' . $params . ')';
+                                    }
+                                }
+                            }
+                            if (isset($compiler->template->required_plugins['nocache'][$modifier][Smarty::PLUGIN_MODIFIER]['file']) || isset($compiler->template->required_plugins['compiled'][$modifier][Smarty::PLUGIN_MODIFIER]['file'])) {
+                                // was a plugin
+                                $compiler->known_modifier_type[$modifier] = 4;
+                            } else {
+                                $compiler->known_modifier_type[$modifier] = $type;
+                            }
+                            break 2;
+                        }
+                }
+            }
+            if (!isset($compiler->known_modifier_type[$modifier])) {
+                $compiler->trigger_template_error("unknown modifier \"" . $modifier . "\"", $compiler->lex->taglineno);
+            }
+        }
+
+        return $output;
+    }
+
+}

resources/templates/engine/smarty/sysplugins/smarty_internal_compile_private_object_block_function.php

@@ -0,0 +1,87 @@
+<?php
+/**
+ * Smarty Internal Plugin Compile Object Block Function
+ *
+ * Compiles code for registered objects as block function
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ * @author Uwe Tews
+ */
+
+/**
+ * Smarty Internal Plugin Compile Object Block Function Class
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ */
+class Smarty_Internal_Compile_Private_Object_Block_Function extends Smarty_Internal_CompileBase
+{
+    /**
+     * Attribute definition: Overwrites base class.
+     *
+     * @var array
+     * @see Smarty_Internal_CompileBase
+     */
+    public $optional_attributes = array('_any');
+
+    /**
+     * Compiles code for the execution of block plugin
+     *
+     * @param  array  $args      array with attributes from parser
+     * @param  object $compiler  compiler object
+     * @param  array  $parameter array with compilation parameter
+     * @param  string $tag       name of block object
+     * @param  string $method    name of method to call
+     * @return string compiled code
+     */
+    public function compile($args, $compiler, $parameter, $tag, $method)
+    {
+        if (!isset($tag[5]) || substr($tag, -5) != 'close') {
+            // opening tag of block plugin
+            // check and get attributes
+            $_attr = $this->getAttributes($compiler, $args);
+            if ($_attr['nocache'] === true) {
+                $compiler->tag_nocache = true;
+            }
+            unset($_attr['nocache']);
+            // convert attributes into parameter array string
+            $_paramsArray = array();
+            foreach ($_attr as $_key => $_value) {
+                if (is_int($_key)) {
+                    $_paramsArray[] = "$_key=>$_value";
+                } else {
+                    $_paramsArray[] = "'$_key'=>$_value";
+                }
+            }
+            $_params = 'array(' . implode(",", $_paramsArray) . ')';
+
+            $this->openTag($compiler, $tag . '->' . $method, array($_params, $compiler->nocache));
+            // maybe nocache because of nocache variables or nocache plugin
+            $compiler->nocache = $compiler->nocache | $compiler->tag_nocache;
+            // compile code
+            $output = "<?php \$_smarty_tpl->smarty->_tag_stack[] = array('{$tag}->{$method}', {$_params}); \$_block_repeat=true; echo \$_smarty_tpl->smarty->registered_objects['{$tag}'][0]->{$method}({$_params}, null, \$_smarty_tpl, \$_block_repeat);while (\$_block_repeat) { ob_start();?>";
+        } else {
+            $base_tag = substr($tag, 0, -5);
+            // must endblock be nocache?
+            if ($compiler->nocache) {
+                $compiler->tag_nocache = true;
+            }
+            // closing tag of block plugin, restore nocache
+            list($_params, $compiler->nocache) = $this->closeTag($compiler, $base_tag . '->' . $method);
+            // This tag does create output
+            $compiler->has_output = true;
+            // compile code
+            if (!isset($parameter['modifier_list'])) {
+                $mod_pre = $mod_post = '';
+            } else {
+                $mod_pre = ' ob_start(); ';
+                $mod_post = 'echo ' . $compiler->compileTag('private_modifier', array(), array('modifierlist' => $parameter['modifier_list'], 'value' => 'ob_get_clean()')) . ';';
+            }
+            $output = "<?php \$_block_content = ob_get_contents(); ob_end_clean(); \$_block_repeat=false;" . $mod_pre . " echo \$_smarty_tpl->smarty->registered_objects['{$base_tag}'][0]->{$method}({$_params}, \$_block_content, \$_smarty_tpl, \$_block_repeat); " . $mod_post . "  } array_pop(\$_smarty_tpl->smarty->_tag_stack);?>";
+        }
+
+        return $output . "\n";
+    }
+
+}

resources/templates/engine/smarty/sysplugins/smarty_internal_compile_private_object_function.php

@@ -0,0 +1,85 @@
+<?php
+/**
+ * Smarty Internal Plugin Compile Object Funtion
+ *
+ * Compiles code for registered objects as function
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ * @author Uwe Tews
+ */
+
+/**
+ * Smarty Internal Plugin Compile Object Function Class
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ */
+class Smarty_Internal_Compile_Private_Object_Function extends Smarty_Internal_CompileBase
+{
+    /**
+     * Attribute definition: Overwrites base class.
+     *
+     * @var array
+     * @see Smarty_Internal_CompileBase
+     */
+    public $optional_attributes = array('_any');
+
+    /**
+     * Compiles code for the execution of function plugin
+     *
+     * @param  array $args      array with attributes from parser
+     * @param  object $compiler  compiler object
+     * @param  array $parameter array with compilation parameter
+     * @param  string $tag       name of function
+     * @param  string $method    name of method to call
+     * @return string compiled code
+     */
+    public function compile($args, $compiler, $parameter, $tag, $method)
+    {
+        // check and get attributes
+        $_attr = $this->getAttributes($compiler, $args);
+        if ($_attr['nocache'] === true) {
+            $compiler->tag_nocache = true;
+        }
+        unset($_attr['nocache']);
+        $_assign = null;
+        if (isset($_attr['assign'])) {
+            $_assign = $_attr['assign'];
+            unset($_attr['assign']);
+        }
+        // method or property ?
+        if (method_exists($compiler->smarty->registered_objects[$tag][0], $method)) {
+            // convert attributes into parameter array string
+            if ($compiler->smarty->registered_objects[$tag][2]) {
+                $_paramsArray = array();
+                foreach ($_attr as $_key => $_value) {
+                    if (is_int($_key)) {
+                        $_paramsArray[] = "$_key=>$_value";
+                    } else {
+                        $_paramsArray[] = "'$_key'=>$_value";
+                    }
+                }
+                $_params = 'array(' . implode(",", $_paramsArray) . ')';
+                $return = "\$_smarty_tpl->smarty->registered_objects['{$tag}'][0]->{$method}({$_params},\$_smarty_tpl)";
+            } else {
+                $_params = implode(",", $_attr);
+                $return = "\$_smarty_tpl->smarty->registered_objects['{$tag}'][0]->{$method}({$_params})";
+            }
+        } else {
+            // object property
+            $return = "\$_smarty_tpl->smarty->registered_objects['{$tag}'][0]->{$method}";
+        }
+
+        if (empty($_assign)) {
+            // This tag does create output
+            $compiler->has_output = true;
+            $output = "<?php echo {$return};?>\n";
+        } else {
+            $output = "<?php \$_smarty_tpl->assign({$_assign},{$return});?>\n";
+        }
+
+        return $output;
+    }
+
+}

resources/templates/engine/smarty/sysplugins/smarty_internal_compile_private_print_expression.php

@@ -0,0 +1,156 @@
+<?php
+/**
+* Smarty Internal Plugin Compile Print Expression
+*
+* Compiles any tag which will output an expression or variable
+*
+* @package Smarty
+* @subpackage Compiler
+* @author Uwe Tews
+*/
+
+/**
+* Smarty Internal Plugin Compile Print Expression Class
+*
+* @package Smarty
+* @subpackage Compiler
+*/
+class Smarty_Internal_Compile_Private_Print_Expression extends Smarty_Internal_CompileBase
+{
+    /**
+    * Attribute definition: Overwrites base class.
+    *
+    * @var array
+    * @see Smarty_Internal_CompileBase
+    */
+    public $optional_attributes = array('assign');
+    /**
+    * Attribute definition: Overwrites base class.
+    *
+    * @var array
+    * @see Smarty_Internal_CompileBase
+    */
+    public $option_flags = array('nocache', 'nofilter');
+
+    /**
+    * Compiles code for gererting output from any expression
+    *
+    * @param array  $args      array with attributes from parser
+    * @param object $compiler  compiler object
+    * @param array  $parameter array with compilation parameter
+    * @return string compiled code
+    */
+    public function compile($args, $compiler, $parameter)
+    {
+        // check and get attributes
+        $_attr = $this->getAttributes($compiler, $args);
+        // nocache option
+        if ($_attr['nocache'] === true) {
+            $compiler->tag_nocache = true;
+        }
+        // filter handling
+        if ($_attr['nofilter'] === true) {
+            $_filter = 'false';
+        } else {
+            $_filter = 'true';
+        }
+        if (isset($_attr['assign'])) {
+            // assign output to variable
+            $output = "<?php \$_smarty_tpl->assign({$_attr['assign']},{$parameter['value']});?>";
+        } else {
+            // display value
+            $output = $parameter['value'];
+            // tag modifier
+            if (!empty($parameter['modifierlist'])) {
+                $output = $compiler->compileTag('private_modifier', array(), array('modifierlist' => $parameter['modifierlist'], 'value' => $output));
+            }
+            if (!$_attr['nofilter']) {
+                // default modifier
+                if (!empty($compiler->smarty->default_modifiers)) {
+                    if (empty($compiler->default_modifier_list)) {
+                        $modifierlist = array();
+                        foreach ($compiler->smarty->default_modifiers as $key => $single_default_modifier) {
+                            preg_match_all('/(\'[^\'\\\\]*(?:\\\\.[^\'\\\\]*)*\'|"[^"\\\\]*(?:\\\\.[^"\\\\]*)*"|:|[^:]+)/', $single_default_modifier, $mod_array);
+                            for ($i = 0, $count = count($mod_array[0]);$i < $count;$i++) {
+                                if ($mod_array[0][$i] != ':') {
+                                    $modifierlist[$key][] = $mod_array[0][$i];
+                                }
+                            }
+                        }
+                        $compiler->default_modifier_list  = $modifierlist;
+                    }
+                    $output = $compiler->compileTag('private_modifier', array(), array('modifierlist' => $compiler->default_modifier_list, 'value' => $output));
+                }
+                // autoescape html
+                if ($compiler->template->smarty->escape_html) {
+                    $output = "htmlspecialchars({$output}, ENT_QUOTES, '" . addslashes(Smarty::$_CHARSET) . "')";
+                }
+                // loop over registerd filters
+                if (!empty($compiler->template->smarty->registered_filters[Smarty::FILTER_VARIABLE])) {
+                    foreach ($compiler->template->smarty->registered_filters[Smarty::FILTER_VARIABLE] as $key => $function) {
+                        if (!is_array($function)) {
+                            $output = "{$function}({$output},\$_smarty_tpl)";
+                        } elseif (is_object($function[0])) {
+                            $output = "\$_smarty_tpl->smarty->registered_filters[Smarty::FILTER_VARIABLE]['{$key}'][0]->{$function[1]}({$output},\$_smarty_tpl)";
+                        } else {
+                            $output = "{$function[0]}::{$function[1]}({$output},\$_smarty_tpl)";
+                        }
+                    }
+                }
+                // auto loaded filters
+                if (isset($compiler->smarty->autoload_filters[Smarty::FILTER_VARIABLE])) {
+                    foreach ((array) $compiler->template->smarty->autoload_filters[Smarty::FILTER_VARIABLE] as $name) {
+                        $result = $this->compile_output_filter($compiler, $name, $output);
+                        if ($result !== false) {
+                            $output = $result;
+                        } else {
+                            // not found, throw exception
+                            throw new SmartyException("Unable to load filter '{$name}'");
+                        }
+                    }
+                }
+                if (isset($compiler->template->variable_filters)) {
+                    foreach ($compiler->template->variable_filters as $filter) {
+                        if (count($filter) == 1 && ($result = $this->compile_output_filter($compiler, $filter[0], $output)) !== false) {
+                            $output = $result;
+                        } else {
+                            $output = $compiler->compileTag('private_modifier', array(), array('modifierlist' => array($filter), 'value' => $output));
+                        }
+                    }
+                }
+            }
+
+            $compiler->has_output = true;
+            $output = "<?php echo {$output};?>";
+        }
+
+        return $output;
+    }
+
+    /**
+    * @param object $compiler compiler object
+    * @param string $name     name of variable filter
+    * @param type   $output   embedded output
+    * @return string
+    */
+    private function compile_output_filter($compiler, $name, $output)
+    {
+        $plugin_name = "smarty_variablefilter_{$name}";
+        $path = $compiler->smarty->loadPlugin($plugin_name, false);
+        if ($path) {
+            if ($compiler->template->caching) {
+                $compiler->template->required_plugins['nocache'][$name][Smarty::FILTER_VARIABLE]['file'] = $path;
+                $compiler->template->required_plugins['nocache'][$name][Smarty::FILTER_VARIABLE]['function'] = $plugin_name;
+            } else {
+                $compiler->template->required_plugins['compiled'][$name][Smarty::FILTER_VARIABLE]['file'] = $path;
+                $compiler->template->required_plugins['compiled'][$name][Smarty::FILTER_VARIABLE]['function'] = $plugin_name;
+            }
+        } else {
+            // not found
+            return false;
+        }
+
+        return "{$plugin_name}({$output},\$_smarty_tpl)";
+    }
+
+}

resources/templates/engine/smarty/sysplugins/smarty_internal_compile_private_registered_block.php

@@ -0,0 +1,112 @@
+<?php
+/**
+ * Smarty Internal Plugin Compile Registered Block
+ *
+ * Compiles code for the execution of a registered block function
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ * @author Uwe Tews
+ */
+
+/**
+ * Smarty Internal Plugin Compile Registered Block Class
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ */
+class Smarty_Internal_Compile_Private_Registered_Block extends Smarty_Internal_CompileBase
+{
+    /**
+     * Attribute definition: Overwrites base class.
+     *
+     * @var array
+     * @see Smarty_Internal_CompileBase
+     */
+    public $optional_attributes = array('_any');
+
+    /**
+     * Compiles code for the execution of a block function
+     *
+     * @param  array  $args      array with attributes from parser
+     * @param  object $compiler  compiler object
+     * @param  array  $parameter array with compilation parameter
+     * @param  string $tag       name of block function
+     * @return string compiled code
+     */
+    public function compile($args, $compiler, $parameter, $tag)
+    {
+        if (!isset($tag[5]) || substr($tag,-5) != 'close') {
+            // opening tag of block plugin
+            // check and get attributes
+            $_attr = $this->getAttributes($compiler, $args);
+            if ($_attr['nocache']) {
+                $compiler->tag_nocache = true;
+            }
+               unset($_attr['nocache']);
+               if (isset($compiler->smarty->registered_plugins[Smarty::PLUGIN_BLOCK][$tag])) {
+                   $tag_info = $compiler->smarty->registered_plugins[Smarty::PLUGIN_BLOCK][$tag];
+               } else {
+                   $tag_info = $compiler->default_handler_plugins[Smarty::PLUGIN_BLOCK][$tag];
+               }
+            // convert attributes into parameter array string
+            $_paramsArray = array();
+            foreach ($_attr as $_key => $_value) {
+                if (is_int($_key)) {
+                    $_paramsArray[] = "$_key=>$_value";
+                } elseif ($compiler->template->caching && in_array($_key,$tag_info[2])) {
+                    $_value = str_replace("'","^#^",$_value);
+                    $_paramsArray[] = "'$_key'=>^#^.var_export($_value,true).^#^";
+                } else {
+                    $_paramsArray[] = "'$_key'=>$_value";
+                }
+            }
+            $_params = 'array(' . implode(",", $_paramsArray) . ')';
+
+            $this->openTag($compiler, $tag, array($_params, $compiler->nocache));
+            // maybe nocache because of nocache variables or nocache plugin
+            $compiler->nocache = !$tag_info[1] | $compiler->nocache | $compiler->tag_nocache;
+            $function = $tag_info[0];
+            // compile code
+            if (!is_array($function)) {
+                $output = "<?php \$_smarty_tpl->smarty->_tag_stack[] = array('{$tag}', {$_params}); \$_block_repeat=true; echo {$function}({$_params}, null, \$_smarty_tpl, \$_block_repeat);while (\$_block_repeat) { ob_start();?>";
+            } elseif (is_object($function[0])) {
+                $output = "<?php \$_smarty_tpl->smarty->_tag_stack[] = array('{$tag}', {$_params}); \$_block_repeat=true; echo \$_smarty_tpl->smarty->registered_plugins['block']['{$tag}'][0][0]->{$function[1]}({$_params}, null, \$_smarty_tpl, \$_block_repeat);while (\$_block_repeat) { ob_start();?>";
+            } else {
+                $output = "<?php \$_smarty_tpl->smarty->_tag_stack[] = array('{$tag}', {$_params}); \$_block_repeat=true; echo {$function[0]}::{$function[1]}({$_params}, null, \$_smarty_tpl, \$_block_repeat);while (\$_block_repeat) { ob_start();?>";
+            }
+        } else {
+            // must endblock be nocache?
+            if ($compiler->nocache) {
+                $compiler->tag_nocache = true;
+            }
+            $base_tag = substr($tag, 0, -5);
+            // closing tag of block plugin, restore nocache
+            list($_params, $compiler->nocache) = $this->closeTag($compiler, $base_tag);
+            // This tag does create output
+            $compiler->has_output = true;
+               if (isset($compiler->smarty->registered_plugins[Smarty::PLUGIN_BLOCK][$base_tag])) {
+                   $function = $compiler->smarty->registered_plugins[Smarty::PLUGIN_BLOCK][$base_tag][0];
+               } else {
+                   $function = $compiler->default_handler_plugins[Smarty::PLUGIN_BLOCK][$base_tag][0];
+               }
+            // compile code
+            if (!isset($parameter['modifier_list'])) {
+                $mod_pre = $mod_post ='';
+            } else {
+                $mod_pre = ' ob_start(); ';
+                $mod_post = 'echo '.$compiler->compileTag('private_modifier',array(),array('modifierlist'=>$parameter['modifier_list'],'value'=>'ob_get_clean()')).';';
+            }
+            if (!is_array($function)) {
+                $output = "<?php \$_block_content = ob_get_clean(); \$_block_repeat=false;".$mod_pre." echo {$function}({$_params}, \$_block_content, \$_smarty_tpl, \$_block_repeat);".$mod_post." } array_pop(\$_smarty_tpl->smarty->_tag_stack);?>";
+            } elseif (is_object($function[0])) {
+                $output = "<?php \$_block_content = ob_get_clean(); \$_block_repeat=false;".$mod_pre." echo \$_smarty_tpl->smarty->registered_plugins['block']['{$base_tag}'][0][0]->{$function[1]}({$_params}, \$_block_content, \$_smarty_tpl, \$_block_repeat); ".$mod_post."} array_pop(\$_smarty_tpl->smarty->_tag_stack);?>";
+            } else {
+                $output = "<?php \$_block_content = ob_get_clean(); \$_block_repeat=false;".$mod_pre." echo {$function[0]}::{$function[1]}({$_params}, \$_block_content, \$_smarty_tpl, \$_block_repeat); ".$mod_post."} array_pop(\$_smarty_tpl->smarty->_tag_stack);?>";
+            }
+        }
+
+        return $output . "\n";
+    }
+
+}

resources/templates/engine/smarty/sysplugins/smarty_internal_compile_private_registered_function.php

@@ -0,0 +1,80 @@
+<?php
+/**
+ * Smarty Internal Plugin Compile Registered Function
+ *
+ * Compiles code for the execution of a registered function
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ * @author Uwe Tews
+ */
+
+/**
+ * Smarty Internal Plugin Compile Registered Function Class
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ */
+class Smarty_Internal_Compile_Private_Registered_Function extends Smarty_Internal_CompileBase
+{
+    /**
+     * Attribute definition: Overwrites base class.
+     *
+     * @var array
+     * @see Smarty_Internal_CompileBase
+     */
+    public $optional_attributes = array('_any');
+
+    /**
+     * Compiles code for the execution of a registered function
+     *
+     * @param  array  $args      array with attributes from parser
+     * @param  object $compiler  compiler object
+     * @param  array  $parameter array with compilation parameter
+     * @param  string $tag       name of function
+     * @return string compiled code
+     */
+    public function compile($args, $compiler, $parameter, $tag)
+    {
+        // This tag does create output
+        $compiler->has_output = true;
+        // check and get attributes
+        $_attr = $this->getAttributes($compiler, $args);
+        if ($_attr['nocache']) {
+            $compiler->tag_nocache = true;
+        }
+        unset($_attr['nocache']);
+               if (isset($compiler->smarty->registered_plugins[Smarty::PLUGIN_FUNCTION][$tag])) {
+                   $tag_info = $compiler->smarty->registered_plugins[Smarty::PLUGIN_FUNCTION][$tag];
+               } else {
+                   $tag_info = $compiler->default_handler_plugins[Smarty::PLUGIN_FUNCTION][$tag];
+               }
+        // not cachable?
+        $compiler->tag_nocache =  $compiler->tag_nocache || !$tag_info[1];
+        // convert attributes into parameter array string
+        $_paramsArray = array();
+        foreach ($_attr as $_key => $_value) {
+            if (is_int($_key)) {
+                $_paramsArray[] = "$_key=>$_value";
+            } elseif ($compiler->template->caching && in_array($_key,$tag_info[2])) {
+                $_value = str_replace("'","^#^",$_value);
+                $_paramsArray[] = "'$_key'=>^#^.var_export($_value,true).^#^";
+            } else {
+                $_paramsArray[] = "'$_key'=>$_value";
+            }
+        }
+        $_params = 'array(' . implode(",", $_paramsArray) . ')';
+        $function = $tag_info[0];
+        // compile code
+        if (!is_array($function)) {
+            $output = "<?php echo {$function}({$_params},\$_smarty_tpl);?>\n";
+        } elseif (is_object($function[0])) {
+            $output = "<?php echo \$_smarty_tpl->smarty->registered_plugins[Smarty::PLUGIN_FUNCTION]['{$tag}'][0][0]->{$function[1]}({$_params},\$_smarty_tpl);?>\n";
+        } else {
+            $output = "<?php echo {$function[0]}::{$function[1]}({$_params},\$_smarty_tpl);?>\n";
+        }
+
+        return $output;
+    }
+
+}

resources/templates/engine/smarty/sysplugins/smarty_internal_compile_private_special_variable.php

@@ -0,0 +1,114 @@
+<?php
+/**
+ * Smarty Internal Plugin Compile Special Smarty Variable
+ *
+ * Compiles the special $smarty variables
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ * @author Uwe Tews
+ */
+
+/**
+ * Smarty Internal Plugin Compile special Smarty Variable Class
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ */
+class Smarty_Internal_Compile_Private_Special_Variable extends Smarty_Internal_CompileBase
+{
+    /**
+     * Compiles code for the speical $smarty variables
+     *
+     * @param  array  $args     array with attributes from parser
+     * @param  object $compiler compiler object
+     * @return string compiled code
+     */
+    public function compile($args, $compiler, $parameter)
+    {
+        $_index = preg_split("/\]\[/",substr($parameter, 1, strlen($parameter)-2));
+        $compiled_ref = ' ';
+        $variable = trim($_index[0], "'");
+        switch ($variable) {
+            case 'foreach':
+                return "\$_smarty_tpl->getVariable('smarty')->value$parameter";
+            case 'section':
+                return "\$_smarty_tpl->getVariable('smarty')->value$parameter";
+            case 'capture':
+                return "Smarty::\$_smarty_vars$parameter";
+            case 'now':
+                return 'time()';
+            case 'cookies':
+                if (isset($compiler->smarty->security_policy) && !$compiler->smarty->security_policy->allow_super_globals) {
+                    $compiler->trigger_template_error("(secure mode) super globals not permitted");
+                    break;
+                }
+                $compiled_ref = '$_COOKIE';
+                break;
+
+            case 'get':
+            case 'post':
+            case 'env':
+            case 'server':
+            case 'session':
+            case 'request':
+                if (isset($compiler->smarty->security_policy) && !$compiler->smarty->security_policy->allow_super_globals) {
+                    $compiler->trigger_template_error("(secure mode) super globals not permitted");
+                    break;
+                }
+                $compiled_ref = '$_'.strtoupper($variable);
+                break;
+
+            case 'template':
+                return 'basename($_smarty_tpl->source->filepath)';
+
+            case 'template_object':
+                return '$_smarty_tpl';
+
+            case 'current_dir':
+                return 'dirname($_smarty_tpl->source->filepath)';
+
+            case 'version':
+                $_version = Smarty::SMARTY_VERSION;
+
+                return "'$_version'";
+
+            case 'const':
+                if (isset($compiler->smarty->security_policy) && !$compiler->smarty->security_policy->allow_constants) {
+                    $compiler->trigger_template_error("(secure mode) constants not permitted");
+                    break;
+                }
+
+                return "@constant({$_index[1]})";
+
+            case 'config':
+                if (isset($_index[2])) {
+                    return "(is_array(\$tmp = \$_smarty_tpl->getConfigVariable($_index[1])) ? \$tmp[$_index[2]] : null)";
+                } else {
+                    return "\$_smarty_tpl->getConfigVariable($_index[1])";
+                }
+            case 'ldelim':
+                $_ldelim = $compiler->smarty->left_delimiter;
+
+                return "'$_ldelim'";
+
+            case 'rdelim':
+                $_rdelim = $compiler->smarty->right_delimiter;
+
+                return "'$_rdelim'";
+
+            default:
+                $compiler->trigger_template_error('$smarty.' . trim($_index[0], "'") . ' is invalid');
+                break;
+        }
+        if (isset($_index[1])) {
+            array_shift($_index);
+            foreach ($_index as $_ind) {
+                $compiled_ref = $compiled_ref . "[$_ind]";
+            }
+        }
+
+        return $compiled_ref;
+    }
+
+}

resources/templates/engine/smarty/sysplugins/smarty_internal_compile_rdelim.php

@@ -0,0 +1,40 @@
+<?php
+/**
+ * Smarty Internal Plugin Compile Rdelim
+ *
+ * Compiles the {rdelim} tag
+ * @package Smarty
+ * @subpackage Compiler
+ * @author Uwe Tews
+ */
+
+/**
+ * Smarty Internal Plugin Compile Rdelim Class
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ */
+class Smarty_Internal_Compile_Rdelim extends Smarty_Internal_CompileBase
+{
+    /**
+     * Compiles code for the {rdelim} tag
+     *
+     * This tag does output the right delimiter.
+     *
+     * @param  array  $args     array with attributes from parser
+     * @param  object $compiler compiler object
+     * @return string compiled code
+     */
+    public function compile($args, $compiler)
+    {
+        $_attr = $this->getAttributes($compiler, $args);
+        if ($_attr['nocache'] === true) {
+            $compiler->trigger_template_error('nocache option not allowed', $compiler->lex->taglineno);
+        }
+        // this tag does not return compiled code
+        $compiler->has_code = true;
+
+        return $compiler->smarty->right_delimiter;
+    }
+
+}

resources/templates/engine/smarty/sysplugins/smarty_internal_compile_section.php

@@ -0,0 +1,202 @@
+<?php
+/**
+ * Smarty Internal Plugin Compile Section
+ *
+ * Compiles the {section} {sectionelse} {/section} tags
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ * @author Uwe Tews
+ */
+
+/**
+ * Smarty Internal Plugin Compile Section Class
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ */
+class Smarty_Internal_Compile_Section extends Smarty_Internal_CompileBase
+{
+    /**
+     * Attribute definition: Overwrites base class.
+     *
+     * @var array
+     * @see Smarty_Internal_CompileBase
+     */
+    public $required_attributes = array('name', 'loop');
+    /**
+     * Attribute definition: Overwrites base class.
+     *
+     * @var array
+     * @see Smarty_Internal_CompileBase
+     */
+    public $shorttag_order = array('name', 'loop');
+    /**
+     * Attribute definition: Overwrites base class.
+     *
+     * @var array
+     * @see Smarty_Internal_CompileBase
+     */
+    public $optional_attributes = array('start', 'step', 'max', 'show');
+
+    /**
+     * Compiles code for the {section} tag
+     *
+     * @param  array  $args     array with attributes from parser
+     * @param  object $compiler compiler object
+     * @return string compiled code
+     */
+    public function compile($args, $compiler)
+    {
+        // check and get attributes
+        $_attr = $this->getAttributes($compiler, $args);
+
+        $this->openTag($compiler, 'section', array('section', $compiler->nocache));
+        // maybe nocache because of nocache variables
+        $compiler->nocache = $compiler->nocache | $compiler->tag_nocache;
+
+        $output = "<?php ";
+
+        $section_name = $_attr['name'];
+
+        $output .= "if (isset(\$_smarty_tpl->tpl_vars['smarty']->value['section'][$section_name])) unset(\$_smarty_tpl->tpl_vars['smarty']->value['section'][$section_name]);\n";
+        $section_props = "\$_smarty_tpl->tpl_vars['smarty']->value['section'][$section_name]";
+
+        foreach ($_attr as $attr_name => $attr_value) {
+            switch ($attr_name) {
+                case 'loop':
+                    $output .= "{$section_props}['loop'] = is_array(\$_loop=$attr_value) ? count(\$_loop) : max(0, (int) \$_loop); unset(\$_loop);\n";
+                    break;
+
+                case 'show':
+                    if (is_bool($attr_value))
+                        $show_attr_value = $attr_value ? 'true' : 'false';
+                    else
+                        $show_attr_value = "(bool) $attr_value";
+                    $output .= "{$section_props}['show'] = $show_attr_value;\n";
+                    break;
+
+                case 'name':
+                    $output .= "{$section_props}['$attr_name'] = $attr_value;\n";
+                    break;
+
+                case 'max':
+                case 'start':
+                    $output .= "{$section_props}['$attr_name'] = (int) $attr_value;\n";
+                    break;
+
+                case 'step':
+                    $output .= "{$section_props}['$attr_name'] = ((int) $attr_value) == 0 ? 1 : (int) $attr_value;\n";
+                    break;
+            }
+        }
+
+        if (!isset($_attr['show']))
+            $output .= "{$section_props}['show'] = true;\n";
+
+        if (!isset($_attr['loop']))
+            $output .= "{$section_props}['loop'] = 1;\n";
+
+        if (!isset($_attr['max']))
+            $output .= "{$section_props}['max'] = {$section_props}['loop'];\n";
+        else
+            $output .= "if ({$section_props}['max'] < 0)\n" . "    {$section_props}['max'] = {$section_props}['loop'];\n";
+
+        if (!isset($_attr['step']))
+            $output .= "{$section_props}['step'] = 1;\n";
+
+        if (!isset($_attr['start']))
+            $output .= "{$section_props}['start'] = {$section_props}['step'] > 0 ? 0 : {$section_props}['loop']-1;\n";
+        else {
+            $output .= "if ({$section_props}['start'] < 0)\n" . "    {$section_props}['start'] = max({$section_props}['step'] > 0 ? 0 : -1, {$section_props}['loop'] + {$section_props}['start']);\n" . "else\n" . "    {$section_props}['start'] = min({$section_props}['start'], {$section_props}['step'] > 0 ? {$section_props}['loop'] : {$section_props}['loop']-1);\n";
+        }
+
+        $output .= "if ({$section_props}['show']) {\n";
+        if (!isset($_attr['start']) && !isset($_attr['step']) && !isset($_attr['max'])) {
+            $output .= "    {$section_props}['total'] = {$section_props}['loop'];\n";
+        } else {
+            $output .= "    {$section_props}['total'] = min(ceil(({$section_props}['step'] > 0 ? {$section_props}['loop'] - {$section_props}['start'] : {$section_props}['start']+1)/abs({$section_props}['step'])), {$section_props}['max']);\n";
+        }
+        $output .= "    if ({$section_props}['total'] == 0)\n" . "        {$section_props}['show'] = false;\n" . "} else\n" . "    {$section_props}['total'] = 0;\n";
+
+        $output .= "if ({$section_props}['show']):\n";
+        $output .= "
+            for ({$section_props}['index'] = {$section_props}['start'], {$section_props}['iteration'] = 1;
+                 {$section_props}['iteration'] <= {$section_props}['total'];
+                 {$section_props}['index'] += {$section_props}['step'], {$section_props}['iteration']++):\n";
+        $output .= "{$section_props}['rownum'] = {$section_props}['iteration'];\n";
+        $output .= "{$section_props}['index_prev'] = {$section_props}['index'] - {$section_props}['step'];\n";
+        $output .= "{$section_props}['index_next'] = {$section_props}['index'] + {$section_props}['step'];\n";
+        $output .= "{$section_props}['first']      = ({$section_props}['iteration'] == 1);\n";
+        $output .= "{$section_props}['last']       = ({$section_props}['iteration'] == {$section_props}['total']);\n";
+
+        $output .= "?>";
+
+        return $output;
+    }
+
+}
+
+/**
+ * Smarty Internal Plugin Compile Sectionelse Class
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ */
+class Smarty_Internal_Compile_Sectionelse extends Smarty_Internal_CompileBase
+{
+    /**
+     * Compiles code for the {sectionelse} tag
+     *
+     * @param  array  $args     array with attributes from parser
+     * @param  object $compiler compiler object
+     * @return string compiled code
+     */
+    public function compile($args, $compiler)
+    {
+        // check and get attributes
+        $_attr = $this->getAttributes($compiler, $args);
+
+        list($openTag, $nocache) = $this->closeTag($compiler, array('section'));
+        $this->openTag($compiler, 'sectionelse', array('sectionelse', $nocache));
+
+        return "<?php endfor; else: ?>";
+    }
+
+}
+
+/**
+ * Smarty Internal Plugin Compile Sectionclose Class
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ */
+class Smarty_Internal_Compile_Sectionclose extends Smarty_Internal_CompileBase
+{
+    /**
+     * Compiles code for the {/section} tag
+     *
+     * @param  array  $args     array with attributes from parser
+     * @param  object $compiler compiler object
+     * @return string compiled code
+     */
+    public function compile($args, $compiler)
+    {
+        // check and get attributes
+        $_attr = $this->getAttributes($compiler, $args);
+
+        // must endblock be nocache?
+        if ($compiler->nocache) {
+            $compiler->tag_nocache = true;
+        }
+
+        list($openTag, $compiler->nocache) = $this->closeTag($compiler, array('section', 'sectionelse'));
+
+        if ($openTag == 'sectionelse') {
+            return "<?php endif; ?>";
+        } else {
+            return "<?php endfor; endif; ?>";
+        }
+    }
+
+}

resources/templates/engine/smarty/sysplugins/smarty_internal_compile_setfilter.php

@@ -0,0 +1,72 @@
+<?php
+/**
+ * Smarty Internal Plugin Compile Setfilter
+ *
+ * Compiles code for setfilter tag
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ * @author Uwe Tews
+ */
+
+/**
+ * Smarty Internal Plugin Compile Setfilter Class
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ */
+class Smarty_Internal_Compile_Setfilter extends Smarty_Internal_CompileBase
+{
+    /**
+     * Compiles code for setfilter tag
+     *
+     * @param  array  $args      array with attributes from parser
+     * @param  object $compiler  compiler object
+     * @param  array  $parameter array with compilation parameter
+     * @return string compiled code
+     */
+    public function compile($args, $compiler, $parameter)
+    {
+        $compiler->variable_filter_stack[] = $compiler->template->variable_filters;
+        $compiler->template->variable_filters = $parameter['modifier_list'];
+        // this tag does not return compiled code
+        $compiler->has_code = false;
+
+        return true;
+    }
+
+}
+
+/**
+ * Smarty Internal Plugin Compile Setfilterclose Class
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ */
+class Smarty_Internal_Compile_Setfilterclose extends Smarty_Internal_CompileBase
+{
+    /**
+     * Compiles code for the {/setfilter} tag
+     *
+     * This tag does not generate compiled output. It resets variable filter.
+     *
+     * @param  array  $args     array with attributes from parser
+     * @param  object $compiler compiler object
+     * @return string compiled code
+     */
+    public function compile($args, $compiler)
+    {
+        $_attr = $this->getAttributes($compiler, $args);
+        // reset variable filter to previous state
+        if (count($compiler->variable_filter_stack)) {
+            $compiler->template->variable_filters = array_pop($compiler->variable_filter_stack);
+        } else {
+            $compiler->template->variable_filters = array();
+        }
+        // this tag does not return compiled code
+        $compiler->has_code = false;
+
+        return true;
+    }
+
+}

resources/templates/engine/smarty/sysplugins/smarty_internal_compile_while.php

@@ -0,0 +1,94 @@
+<?php
+/**
+ * Smarty Internal Plugin Compile While
+ *
+ * Compiles the {while} tag
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ * @author Uwe Tews
+ */
+
+/**
+ * Smarty Internal Plugin Compile While Class
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ */
+class Smarty_Internal_Compile_While extends Smarty_Internal_CompileBase
+{
+    /**
+     * Compiles code for the {while} tag
+     *
+     * @param  array  $args      array with attributes from parser
+     * @param  object $compiler  compiler object
+     * @param  array  $parameter array with compilation parameter
+     * @return string compiled code
+     */
+    public function compile($args, $compiler, $parameter)
+    {
+        // check and get attributes
+        $_attr = $this->getAttributes($compiler, $args);
+        $this->openTag($compiler, 'while', $compiler->nocache);
+
+        if (!array_key_exists("if condition",$parameter)) {
+            $compiler->trigger_template_error("missing while condition", $compiler->lex->taglineno);
+        }
+
+        // maybe nocache because of nocache variables
+        $compiler->nocache = $compiler->nocache | $compiler->tag_nocache;
+        if (is_array($parameter['if condition'])) {
+            if ($compiler->nocache) {
+                $_nocache = ',true';
+                // create nocache var to make it know for further compiling
+                if (is_array($parameter['if condition']['var'])) {
+                    $compiler->template->tpl_vars[trim($parameter['if condition']['var']['var'], "'")] = new Smarty_variable(null, true);
+                } else {
+                    $compiler->template->tpl_vars[trim($parameter['if condition']['var'], "'")] = new Smarty_variable(null, true);
+                }
+            } else {
+                $_nocache = '';
+            }
+            if (is_array($parameter['if condition']['var'])) {
+                $_output = "<?php if (!isset(\$_smarty_tpl->tpl_vars[" . $parameter['if condition']['var']['var'] . "]) || !is_array(\$_smarty_tpl->tpl_vars[" . $parameter['if condition']['var']['var'] . "]->value)) \$_smarty_tpl->createLocalArrayVariable(" . $parameter['if condition']['var']['var'] . "$_nocache);\n";
+                $_output .= "while (\$_smarty_tpl->tpl_vars[" . $parameter['if condition']['var']['var'] . "]->value" . $parameter['if condition']['var']['smarty_internal_index'] . " = " . $parameter['if condition']['value'] . ") {?>";
+            } else {
+                $_output = "<?php if (!isset(\$_smarty_tpl->tpl_vars[" . $parameter['if condition']['var'] . "])) \$_smarty_tpl->tpl_vars[" . $parameter['if condition']['var'] . "] = new Smarty_Variable(null{$_nocache});";
+                $_output .= "while (\$_smarty_tpl->tpl_vars[" . $parameter['if condition']['var'] . "]->value = " . $parameter['if condition']['value'] . ") {?>";
+            }
+
+            return $_output;
+        } else {
+            return "<?php while ({$parameter['if condition']}) {?>";
+        }
+    }
+
+}
+
+/**
+ * Smarty Internal Plugin Compile Whileclose Class
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ */
+class Smarty_Internal_Compile_Whileclose extends Smarty_Internal_CompileBase
+{
+    /**
+     * Compiles code for the {/while} tag
+     *
+     * @param  array  $args     array with attributes from parser
+     * @param  object $compiler compiler object
+     * @return string compiled code
+     */
+    public function compile($args, $compiler)
+    {
+        // must endblock be nocache?
+        if ($compiler->nocache) {
+            $compiler->tag_nocache = true;
+        }
+        $compiler->nocache = $this->closeTag($compiler, array('while'));
+
+        return "<?php }?>";
+    }
+
+}

resources/templates/engine/smarty/sysplugins/smarty_internal_compilebase.php

@@ -0,0 +1,176 @@
+<?php
+/**
+ * Smarty Internal Plugin CompileBase
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ * @author Uwe Tews
+ */
+
+/**
+ * This class does extend all internal compile plugins
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ */
+abstract class Smarty_Internal_CompileBase
+{
+    /**
+     * Array of names of required attribute required by tag
+     *
+     * @var array
+     */
+    public $required_attributes = array();
+    /**
+     * Array of names of optional attribute required by tag
+     * use array('_any') if there is no restriction of attributes names
+     *
+     * @var array
+     */
+    public $optional_attributes = array();
+    /**
+     * Shorttag attribute order defined by its names
+     *
+     * @var array
+     */
+    public $shorttag_order = array();
+    /**
+     * Array of names of valid option flags
+     *
+     * @var array
+     */
+    public $option_flags = array('nocache');
+
+    /**
+     * This function checks if the attributes passed are valid
+     *
+     * The attributes passed for the tag to compile are checked against the list of required and
+     * optional attributes. Required attributes must be present. Optional attributes are check against
+     * the corresponding list. The keyword '_any' specifies that any attribute will be accepted
+     * as valid
+     *
+     * @param  object $compiler   compiler object
+     * @param  array  $attributes attributes applied to the tag
+     * @return array  of mapped attributes for further processing
+     */
+    public function getAttributes($compiler, $attributes)
+    {
+        $_indexed_attr = array();
+        // loop over attributes
+        foreach ($attributes as $key => $mixed) {
+            // shorthand ?
+            if (!is_array($mixed)) {
+                // option flag ?
+                if (in_array(trim($mixed, '\'"'), $this->option_flags)) {
+                    $_indexed_attr[trim($mixed, '\'"')] = true;
+                    // shorthand attribute ?
+                } elseif (isset($this->shorttag_order[$key])) {
+                    $_indexed_attr[$this->shorttag_order[$key]] = $mixed;
+                } else {
+                    // too many shorthands
+                    $compiler->trigger_template_error('too many shorthand attributes', $compiler->lex->taglineno);
+                }
+                // named attribute
+            } else {
+                $kv = each($mixed);
+                // option flag?
+                if (in_array($kv['key'], $this->option_flags)) {
+                    if (is_bool($kv['value'])) {
+                        $_indexed_attr[$kv['key']] = $kv['value'];
+                    } elseif (is_string($kv['value']) && in_array(trim($kv['value'], '\'"'), array('true', 'false'))) {
+                        if (trim($kv['value']) == 'true') {
+                            $_indexed_attr[$kv['key']] = true;
+                        } else {
+                            $_indexed_attr[$kv['key']] = false;
+                        }
+                    } elseif (is_numeric($kv['value']) && in_array($kv['value'], array(0, 1))) {
+                        if ($kv['value'] == 1) {
+                            $_indexed_attr[$kv['key']] = true;
+                        } else {
+                            $_indexed_attr[$kv['key']] = false;
+                        }
+                    } else {
+                        $compiler->trigger_template_error("illegal value of option flag \"{$kv['key']}\"", $compiler->lex->taglineno);
+                    }
+                    // must be named attribute
+                } else {
+                    reset($mixed);
+                    $_indexed_attr[key($mixed)] = $mixed[key($mixed)];
+                }
+            }
+        }
+        // check if all required attributes present
+        foreach ($this->required_attributes as $attr) {
+            if (!array_key_exists($attr, $_indexed_attr)) {
+                $compiler->trigger_template_error("missing \"" . $attr . "\" attribute", $compiler->lex->taglineno);
+            }
+        }
+        // check for unallowed attributes
+        if ($this->optional_attributes != array('_any')) {
+            $tmp_array = array_merge($this->required_attributes, $this->optional_attributes, $this->option_flags);
+            foreach ($_indexed_attr as $key => $dummy) {
+                if (!in_array($key, $tmp_array) && $key !== 0) {
+                    $compiler->trigger_template_error("unexpected \"" . $key . "\" attribute", $compiler->lex->taglineno);
+                }
+            }
+        }
+        // default 'false' for all option flags not set
+        foreach ($this->option_flags as $flag) {
+            if (!isset($_indexed_attr[$flag])) {
+                $_indexed_attr[$flag] = false;
+            }
+        }
+
+        return $_indexed_attr;
+    }
+
+    /**
+     * Push opening tag name on stack
+     *
+     * Optionally additional data can be saved on stack
+     *
+     * @param object $compiler compiler object
+     * @param string $openTag  the opening tag's name
+     * @param mixed  $data     optional data saved
+     */
+    public function openTag($compiler, $openTag, $data = null)
+    {
+        array_push($compiler->_tag_stack, array($openTag, $data));
+    }
+
+    /**
+     * Pop closing tag
+     *
+     * Raise an error if this stack-top doesn't match with expected opening tags
+     *
+     * @param  object       $compiler    compiler object
+     * @param  array|string $expectedTag the expected opening tag names
+     * @return mixed        any type the opening tag's name or saved data
+     */
+    public function closeTag($compiler, $expectedTag)
+    {
+        if (count($compiler->_tag_stack) > 0) {
+            // get stacked info
+            list($_openTag, $_data) = array_pop($compiler->_tag_stack);
+            // open tag must match with the expected ones
+            if (in_array($_openTag, (array) $expectedTag)) {
+                if (is_null($_data)) {
+                    // return opening tag
+                    return $_openTag;
+                } else {
+                    // return restored data
+                    return $_data;
+                }
+            }
+            // wrong nesting of tags
+            $compiler->trigger_template_error("unclosed {$compiler->smarty->left_delimiter}" . $_openTag . "{$compiler->smarty->right_delimiter} tag");
+
+            return;
+        }
+        // wrong nesting of tags
+        $compiler->trigger_template_error("unexpected closing tag", $compiler->lex->taglineno);
+
+        return;
+    }
+
+}

resources/templates/engine/smarty/sysplugins/smarty_internal_config.php

@@ -0,0 +1,305 @@
+<?php
+/**
+ * Smarty Internal Plugin Config
+ *
+ * @package Smarty
+ * @subpackage Config
+ * @author Uwe Tews
+ */
+
+/**
+ * Smarty Internal Plugin Config
+ *
+ * Main class for config variables
+ *
+ * @package Smarty
+ * @subpackage Config
+ *
+ * @property Smarty_Config_Source   $source
+ * @property Smarty_Config_Compiled $compiled
+ * @ignore
+ */
+class Smarty_Internal_Config
+{
+    /**
+     * Samrty instance
+     *
+     * @var Smarty object
+     */
+    public $smarty = null;
+    /**
+     * Object of config var storage
+     *
+     * @var object
+     */
+    public $data = null;
+    /**
+     * Config resource
+     * @var string
+     */
+    public $config_resource = null;
+    /**
+     * Compiled config file
+     *
+     * @var string
+     */
+    public $compiled_config = null;
+    /**
+     * filepath of compiled config file
+     *
+     * @var string
+     */
+    public $compiled_filepath = null;
+    /**
+     * Filemtime of compiled config Filemtime
+     *
+     * @var int
+     */
+    public $compiled_timestamp = null;
+    /**
+     * flag if compiled config file is invalid and must be (re)compiled
+     * @var bool
+     */
+    public $mustCompile = null;
+    /**
+     * Config file compiler object
+     *
+     * @var Smarty_Internal_Config_File_Compiler object
+     */
+    public $compiler_object = null;
+
+    /**
+     * Constructor of config file object
+     *
+     * @param string $config_resource config file resource name
+     * @param Smarty $smarty          Smarty instance
+     * @param object $data            object for config vars storage
+     */
+    public function __construct($config_resource, $smarty, $data = null)
+    {
+        $this->data = $data;
+        $this->smarty = $smarty;
+        $this->config_resource = $config_resource;
+    }
+
+    /**
+     * Returns the compiled  filepath
+     *
+     * @return string the compiled filepath
+     */
+    public function getCompiledFilepath()
+    {
+        return $this->compiled_filepath === null ?
+                ($this->compiled_filepath = $this->buildCompiledFilepath()) :
+                $this->compiled_filepath;
+    }
+
+    /**
+     * Get file path.
+     *
+     * @return string
+     */
+    public function buildCompiledFilepath()
+    {
+        $_compile_id = isset($this->smarty->compile_id) ? preg_replace('![^\w\|]+!', '_', $this->smarty->compile_id) : null;
+        $_flag = (int) $this->smarty->config_read_hidden + (int) $this->smarty->config_booleanize * 2
+                + (int) $this->smarty->config_overwrite * 4;
+        $_filepath = sha1($this->source->filepath . $_flag);
+        // if use_sub_dirs, break file into directories
+        if ($this->smarty->use_sub_dirs) {
+            $_filepath = substr($_filepath, 0, 2) . DS
+                    . substr($_filepath, 2, 2) . DS
+                    . substr($_filepath, 4, 2) . DS
+                    . $_filepath;
+        }
+        $_compile_dir_sep = $this->smarty->use_sub_dirs ? DS : '^';
+        if (isset($_compile_id)) {
+            $_filepath = $_compile_id . $_compile_dir_sep . $_filepath;
+        }
+        $_compile_dir = $this->smarty->getCompileDir();
+
+        return $_compile_dir . $_filepath . '.' . basename($this->source->name) . '.config' . '.php';
+    }
+
+    /**
+     * Returns the timpestamp of the compiled file
+     *
+     * @return integer the file timestamp
+     */
+    public function getCompiledTimestamp()
+    {
+        return $this->compiled_timestamp === null
+            ? ($this->compiled_timestamp = (file_exists($this->getCompiledFilepath())) ? filemtime($this->getCompiledFilepath()) : false)
+            : $this->compiled_timestamp;
+    }
+
+    /**
+     * Returns if the current config file must be compiled
+     *
+     * It does compare the timestamps of config source and the compiled config and checks the force compile configuration
+     *
+     * @return boolean true if the file must be compiled
+     */
+    public function mustCompile()
+    {
+        return $this->mustCompile === null ?
+            $this->mustCompile = ($this->smarty->force_compile || $this->getCompiledTimestamp () === false || $this->smarty->compile_check && $this->getCompiledTimestamp () < $this->source->timestamp):
+            $this->mustCompile;
+    }
+
+    /**
+     * Returns the compiled config file
+     *
+     * It checks if the config file must be compiled or just read the compiled version
+     *
+     * @return string the compiled config file
+     */
+    public function getCompiledConfig()
+    {
+        if ($this->compiled_config === null) {
+            // see if template needs compiling.
+            if ($this->mustCompile()) {
+                $this->compileConfigSource();
+            } else {
+                $this->compiled_config = file_get_contents($this->getCompiledFilepath());
+            }
+        }
+
+        return $this->compiled_config;
+    }
+
+    /**
+     * Compiles the config files
+     *
+     * @throws Exception
+     */
+    public function compileConfigSource()
+    {
+        // compile template
+        if (!is_object($this->compiler_object)) {
+            // load compiler
+            $this->compiler_object = new Smarty_Internal_Config_File_Compiler($this->smarty);
+        }
+        // compile locking
+        if ($this->smarty->compile_locking) {
+            if ($saved_timestamp = $this->getCompiledTimestamp()) {
+                touch($this->getCompiledFilepath());
+            }
+        }
+        // call compiler
+        try {
+            $this->compiler_object->compileSource($this);
+        } catch (Exception $e) {
+            // restore old timestamp in case of error
+            if ($this->smarty->compile_locking && $saved_timestamp) {
+                touch($this->getCompiledFilepath(), $saved_timestamp);
+            }
+            throw $e;
+        }
+        // compiling succeded
+        // write compiled template
+        Smarty_Internal_Write_File::writeFile($this->getCompiledFilepath(), $this->getCompiledConfig(), $this->smarty);
+    }
+
+    /**
+     * load config variables
+     *
+     * @param mixed  $sections array of section names, single section or null
+     * @param object $scope    global,parent or local
+     */
+    public function loadConfigVars($sections = null, $scope = 'local')
+    {
+        if ($this->data instanceof Smarty_Internal_Template) {
+            $this->data->properties['file_dependency'][sha1($this->source->filepath)] = array($this->source->filepath, $this->source->timestamp, 'file');
+        }
+        if ($this->mustCompile()) {
+            $this->compileConfigSource();
+        }
+        // pointer to scope
+        if ($scope == 'local') {
+            $scope_ptr = $this->data;
+        } elseif ($scope == 'parent') {
+            if (isset($this->data->parent)) {
+                $scope_ptr = $this->data->parent;
+            } else {
+                $scope_ptr = $this->data;
+            }
+        } elseif ($scope == 'root' || $scope == 'global') {
+            $scope_ptr = $this->data;
+            while (isset($scope_ptr->parent)) {
+                $scope_ptr = $scope_ptr->parent;
+            }
+        }
+        $_config_vars = array();
+        include($this->getCompiledFilepath());
+        // copy global config vars
+        foreach ($_config_vars['vars'] as $variable => $value) {
+            if ($this->smarty->config_overwrite || !isset($scope_ptr->config_vars[$variable])) {
+                $scope_ptr->config_vars[$variable] = $value;
+            } else {
+                $scope_ptr->config_vars[$variable] = array_merge((array) $scope_ptr->config_vars[$variable], (array) $value);
+            }
+        }
+        // scan sections
+        if (!empty($sections)) {
+            foreach ((array) $sections as $this_section) {
+                if (isset($_config_vars['sections'][$this_section])) {
+                    foreach ($_config_vars['sections'][$this_section]['vars'] as $variable => $value) {
+                        if ($this->smarty->config_overwrite || !isset($scope_ptr->config_vars[$variable])) {
+                            $scope_ptr->config_vars[$variable] = $value;
+                        } else {
+                            $scope_ptr->config_vars[$variable] = array_merge((array) $scope_ptr->config_vars[$variable], (array) $value);
+                        }
+                    }
+                }
+            }
+        }
+    }
+
+    /**
+     * set Smarty property in template context
+     *
+     * @param  string          $property_name property name
+     * @param  mixed           $value         value
+     * @throws SmartyException if $property_name is not valid
+     */
+    public function __set($property_name, $value)
+    {
+        switch ($property_name) {
+            case 'source':
+            case 'compiled':
+                $this->$property_name = $value;
+
+                return;
+        }
+
+        throw new SmartyException("invalid config property '$property_name'.");
+    }
+
+    /**
+     * get Smarty property in template context
+     *
+     * @param  string          $property_name property name
+     * @throws SmartyException if $property_name is not valid
+     */
+    public function __get($property_name)
+    {
+        switch ($property_name) {
+            case 'source':
+                if (empty($this->config_resource)) {
+                    throw new SmartyException("Unable to parse resource name \"{$this->config_resource}\"");
+                }
+                $this->source = Smarty_Resource::config($this);
+
+                return $this->source;
+
+            case 'compiled':
+                $this->compiled = $this->source->getCompiled($this);
+
+                return $this->compiled;
+        }
+
+        throw new SmartyException("config attribute '$property_name' does not exist.");
+    }
+
+}

resources/templates/engine/smarty/sysplugins/smarty_internal_config_file_compiler.php

@@ -0,0 +1,142 @@
+<?php
+/**
+ * Smarty Internal Plugin Config File Compiler
+ *
+ * This is the config file compiler class. It calls the lexer and parser to
+ * perform the compiling.
+ *
+ * @package Smarty
+ * @subpackage Config
+ * @author Uwe Tews
+ */
+
+/**
+ * Main config file compiler class
+ *
+ * @package Smarty
+ * @subpackage Config
+ */
+class Smarty_Internal_Config_File_Compiler
+{
+    /**
+     * Lexer object
+     *
+     * @var object
+     */
+    public $lex;
+
+    /**
+     * Parser object
+     *
+     * @var object
+     */
+    public $parser;
+
+    /**
+     * Smarty object
+     *
+     * @var Smarty object
+     */
+    public $smarty;
+
+    /**
+     * Smarty object
+     *
+     * @var Smarty_Internal_Config object
+     */
+    public $config;
+
+    /**
+     * Compiled config data sections and variables
+     *
+     * @var array
+     */
+    public $config_data = array();
+
+    /**
+     * Initialize compiler
+     *
+     * @param Smarty $smarty base instance
+     */
+    public function __construct($smarty)
+    {
+        $this->smarty = $smarty;
+        $this->config_data['sections'] = array();
+        $this->config_data['vars'] = array();
+    }
+
+    /**
+     * Method to compile a Smarty template.
+     *
+     * @param  Smarty_Internal_Config $config config object
+     * @return bool                   true if compiling succeeded, false if it failed
+     */
+    public function compileSource(Smarty_Internal_Config $config)
+    {
+        /* here is where the compiling takes place. Smarty
+          tags in the templates are replaces with PHP code,
+          then written to compiled files. */
+        $this->config = $config;
+        // get config file source
+        $_content = $config->source->content . "\n";
+        // on empty template just return
+        if ($_content == '') {
+            return true;
+        }
+        // init the lexer/parser to compile the config file
+        $lex = new Smarty_Internal_Configfilelexer($_content, $this->smarty);
+        $parser = new Smarty_Internal_Configfileparser($lex, $this);
+        if ($this->smarty->_parserdebug) $parser->PrintTrace();
+        // get tokens from lexer and parse them
+        while ($lex->yylex()) {
+            if ($this->smarty->_parserdebug) echo "<br>Parsing  {$parser->yyTokenName[$lex->token]} Token {$lex->value} Line {$lex->line} \n";
+            $parser->doParse($lex->token, $lex->value);
+        }
+        // finish parsing process
+        $parser->doParse(0, 0);
+        $config->compiled_config = '<?php $_config_vars = ' . var_export($this->config_data, true) . '; ?>';
+    }
+
+    /**
+     * display compiler error messages without dying
+     *
+     * If parameter $args is empty it is a parser detected syntax error.
+     * In this case the parser is called to obtain information about exspected tokens.
+     *
+     * If parameter $args contains a string this is used as error message
+     *
+     * @param string $args individual error message or null
+     */
+    public function trigger_config_file_error($args = null)
+    {
+        $this->lex = Smarty_Internal_Configfilelexer::instance();
+        $this->parser = Smarty_Internal_Configfileparser::instance();
+        // get template source line which has error
+        $line = $this->lex->line;
+        if (isset($args)) {
+            // $line--;
+        }
+        $match = preg_split("/\n/", $this->lex->data);
+        $error_text = "Syntax error in config file '{$this->config->source->filepath}' on line {$line} '{$match[$line-1]}' ";
+        if (isset($args)) {
+            // individual error message
+            $error_text .= $args;
+        } else {
+            // exspected token from parser
+            foreach ($this->parser->yy_get_expected_tokens($this->parser->yymajor) as $token) {
+                $exp_token = $this->parser->yyTokenName[$token];
+                if (isset($this->lex->smarty_token_names[$exp_token])) {
+                    // token type from lexer
+                    $expect[] = '"' . $this->lex->smarty_token_names[$exp_token] . '"';
+                } else {
+                    // otherwise internal token name
+                    $expect[] = $this->parser->yyTokenName[$token];
+                }
+            }
+            // output parser error message
+            $error_text .= ' - Unexpected "' . $this->lex->value . '", expected one of: ' . implode(' , ', $expect);
+        }
+        throw new SmartyCompilerException($error_text);
+    }
+
+}

resources/templates/engine/smarty/sysplugins/smarty_internal_configfilelexer.php

@@ -0,0 +1,598 @@
+<?php
+/**
+* Smarty Internal Plugin Configfilelexer
+*
+* This is the lexer to break the config file source into tokens
+* @package Smarty
+* @subpackage Config
+* @author Uwe Tews
+*/
+/**
+* Smarty Internal Plugin Configfilelexer
+*/
+class Smarty_Internal_Configfilelexer
+{
+
+    public $data;
+    public $counter;
+    public $token;
+    public $value;
+    public $node;
+    public $line;
+    private $state = 1;
+    public $smarty_token_names = array (		// Text for parser error messages
+                   );
+
+    public function __construct($data, $smarty)
+    {
+        // set instance object
+        self::instance($this);
+        $this->data = $data . "\n"; //now all lines are \n-terminated
+        $this->counter = 0;
+        $this->line = 1;
+        $this->smarty = $smarty;
+        $this->mbstring_overload = ini_get('mbstring.func_overload') & 2;
+    }
+    public static function &instance($new_instance = null)
+    {
+        static $instance = null;
+        if (isset($new_instance) && is_object($new_instance))
+            $instance = $new_instance;
+
+        return $instance;
+    }
+
+    private $_yy_state = 1;
+    private $_yy_stack = array();
+
+    public function yylex()
+    {
+        return $this->{'yylex' . $this->_yy_state}();
+    }
+
+    public function yypushstate($state)
+    {
+        array_push($this->_yy_stack, $this->_yy_state);
+        $this->_yy_state = $state;
+    }
+
+    public function yypopstate()
+    {
+        $this->_yy_state = array_pop($this->_yy_stack);
+    }
+
+    public function yybegin($state)
+    {
+        $this->_yy_state = $state;
+    }
+
+    public function yylex1()
+    {
+        $tokenMap = array (
+              1 => 0,
+              2 => 0,
+              3 => 0,
+              4 => 0,
+              5 => 0,
+              6 => 0,
+              7 => 0,
+              8 => 0,
+            );
+        if ($this->counter >= ($this->mbstring_overload ? mb_strlen($this->data,'latin1'): strlen($this->data))) {
+            return false; // end of input
+        }
+        $yy_global_pattern = "/\G(#|;)|\G(\\[)|\G(\\])|\G(=)|\G([ \t\r]+)|\G(\n)|\G([0-9]*[a-zA-Z_]\\w*)|\G([\S\s])/iS";
+
+        do {
+            if ($this->mbstring_overload ? preg_match($yy_global_pattern, mb_substr($this->data, $this->counter,2000000000,'latin1'), $yymatches) : preg_match($yy_global_pattern,$this->data, $yymatches, null, $this->counter)) {
+                $yysubmatches = $yymatches;
+                $yymatches = array_filter($yymatches, 'strlen'); // remove empty sub-patterns
+                if (!count($yymatches)) {
+                    throw new Exception('Error: lexing failed because a rule matched' .
+                        ' an empty string.  Input "' . substr($this->data,
+                        $this->counter, 5) . '... state START');
+                }
+                next($yymatches); // skip global match
+                $this->token = key($yymatches); // token number
+                if ($tokenMap[$this->token]) {
+                    // extract sub-patterns for passing to lex function
+                    $yysubmatches = array_slice($yysubmatches, $this->token + 1,
+                        $tokenMap[$this->token]);
+                } else {
+                    $yysubmatches = array();
+                }
+                $this->value = current($yymatches); // token value
+                $r = $this->{'yy_r1_' . $this->token}($yysubmatches);
+                if ($r === null) {
+                    $this->counter += ($this->mbstring_overload ? mb_strlen($this->value,'latin1'): strlen($this->value));
+                    $this->line += substr_count($this->value, "\n");
+                    // accept this token
+                    return true;
+                } elseif ($r === true) {
+                    // we have changed state
+                    // process this token in the new state
+                    return $this->yylex();
+                } elseif ($r === false) {
+                    $this->counter += ($this->mbstring_overload ? mb_strlen($this->value,'latin1'): strlen($this->value));
+                    $this->line += substr_count($this->value, "\n");
+                    if ($this->counter >= ($this->mbstring_overload ? mb_strlen($this->data,'latin1'): strlen($this->data))) {
+                        return false; // end of input
+                    }
+                    // skip this token
+                    continue;
+                }            } else {
+                throw new Exception('Unexpected input at line' . $this->line .
+                    ': ' . $this->data[$this->counter]);
+            }
+            break;
+        } while (true);
+
+    } // end function
+
+    const START = 1;
+    public function yy_r1_1($yy_subpatterns)
+    {
+
+    $this->token = Smarty_Internal_Configfileparser::TPC_COMMENTSTART;
+    $this->yypushstate(self::COMMENT);
+    }
+    public function yy_r1_2($yy_subpatterns)
+    {
+
+    $this->token = Smarty_Internal_Configfileparser::TPC_OPENB;
+    $this->yypushstate(self::SECTION);
+    }
+    public function yy_r1_3($yy_subpatterns)
+    {
+
+    $this->token = Smarty_Internal_Configfileparser::TPC_CLOSEB;
+    }
+    public function yy_r1_4($yy_subpatterns)
+    {
+
+    $this->token = Smarty_Internal_Configfileparser::TPC_EQUAL;
+    $this->yypushstate(self::VALUE);
+    }
+    public function yy_r1_5($yy_subpatterns)
+    {
+    return false;
+    }
+    public function yy_r1_6($yy_subpatterns)
+    {
+
+    $this->token = Smarty_Internal_Configfileparser::TPC_NEWLINE;
+    }
+    public function yy_r1_7($yy_subpatterns)
+    {
+
+    $this->token = Smarty_Internal_Configfileparser::TPC_ID;
+    }
+    public function yy_r1_8($yy_subpatterns)
+    {
+
+    $this->token = Smarty_Internal_Configfileparser::TPC_OTHER;
+    }
+
+    public function yylex2()
+    {
+        $tokenMap = array (
+              1 => 0,
+              2 => 0,
+              3 => 0,
+              4 => 0,
+              5 => 0,
+              6 => 0,
+              7 => 0,
+              8 => 0,
+              9 => 0,
+            );
+        if ($this->counter >= ($this->mbstring_overload ? mb_strlen($this->data,'latin1'): strlen($this->data))) {
+            return false; // end of input
+        }
+        $yy_global_pattern = "/\G([ \t\r]+)|\G(\\d+\\.\\d+(?=[ \t\r]*[\n#;]))|\G(\\d+(?=[ \t\r]*[\n#;]))|\G(\"\"\")|\G('[^'\\\\]*(?:\\\\.[^'\\\\]*)*'(?=[ \t\r]*[\n#;]))|\G(\"[^\"\\\\]*(?:\\\\.[^\"\\\\]*)*\"(?=[ \t\r]*[\n#;]))|\G([a-zA-Z]+(?=[ \t\r]*[\n#;]))|\G([^\n]+?(?=[ \t\r]*\n))|\G(\n)/iS";
+
+        do {
+            if ($this->mbstring_overload ? preg_match($yy_global_pattern, mb_substr($this->data, $this->counter,2000000000,'latin1'), $yymatches) : preg_match($yy_global_pattern,$this->data, $yymatches, null, $this->counter)) {
+                $yysubmatches = $yymatches;
+                $yymatches = array_filter($yymatches, 'strlen'); // remove empty sub-patterns
+                if (!count($yymatches)) {
+                    throw new Exception('Error: lexing failed because a rule matched' .
+                        ' an empty string.  Input "' . substr($this->data,
+                        $this->counter, 5) . '... state VALUE');
+                }
+                next($yymatches); // skip global match
+                $this->token = key($yymatches); // token number
+                if ($tokenMap[$this->token]) {
+                    // extract sub-patterns for passing to lex function
+                    $yysubmatches = array_slice($yysubmatches, $this->token + 1,
+                        $tokenMap[$this->token]);
+                } else {
+                    $yysubmatches = array();
+                }
+                $this->value = current($yymatches); // token value
+                $r = $this->{'yy_r2_' . $this->token}($yysubmatches);
+                if ($r === null) {
+                    $this->counter += ($this->mbstring_overload ? mb_strlen($this->value,'latin1'): strlen($this->value));
+                    $this->line += substr_count($this->value, "\n");
+                    // accept this token
+                    return true;
+                } elseif ($r === true) {
+                    // we have changed state
+                    // process this token in the new state
+                    return $this->yylex();
+                } elseif ($r === false) {
+                    $this->counter += ($this->mbstring_overload ? mb_strlen($this->value,'latin1'): strlen($this->value));
+                    $this->line += substr_count($this->value, "\n");
+                    if ($this->counter >= ($this->mbstring_overload ? mb_strlen($this->data,'latin1'): strlen($this->data))) {
+                        return false; // end of input
+                    }
+                    // skip this token
+                    continue;
+                }            } else {
+                throw new Exception('Unexpected input at line' . $this->line .
+                    ': ' . $this->data[$this->counter]);
+            }
+            break;
+        } while (true);
+
+    } // end function
+
+    const VALUE = 2;
+    public function yy_r2_1($yy_subpatterns)
+    {
+    return false;
+    }
+    public function yy_r2_2($yy_subpatterns)
+    {
+
+    $this->token = Smarty_Internal_Configfileparser::TPC_FLOAT;
+    $this->yypopstate();
+    }
+    public function yy_r2_3($yy_subpatterns)
+    {
+
+    $this->token = Smarty_Internal_Configfileparser::TPC_INT;
+    $this->yypopstate();
+    }
+    public function yy_r2_4($yy_subpatterns)
+    {
+
+    $this->token = Smarty_Internal_Configfileparser::TPC_TRIPPLE_QUOTES;
+    $this->yypushstate(self::TRIPPLE);
+    }
+    public function yy_r2_5($yy_subpatterns)
+    {
+
+    $this->token = Smarty_Internal_Configfileparser::TPC_SINGLE_QUOTED_STRING;
+    $this->yypopstate();
+    }
+    public function yy_r2_6($yy_subpatterns)
+    {
+
+    $this->token = Smarty_Internal_Configfileparser::TPC_DOUBLE_QUOTED_STRING;
+    $this->yypopstate();
+    }
+    public function yy_r2_7($yy_subpatterns)
+    {
+
+    if (!$this->smarty->config_booleanize || !in_array(strtolower($this->value), Array("true", "false", "on", "off", "yes", "no")) ) {
+        $this->yypopstate();
+        $this->yypushstate(self::NAKED_STRING_VALUE);
+
+        return true; //reprocess in new state
+    } else {
+        $this->token = Smarty_Internal_Configfileparser::TPC_BOOL;
+        $this->yypopstate();
+    }
+    }
+    public function yy_r2_8($yy_subpatterns)
+    {
+
+    $this->token = Smarty_Internal_Configfileparser::TPC_NAKED_STRING;
+    $this->yypopstate();
+    }
+    public function yy_r2_9($yy_subpatterns)
+    {
+
+    $this->token = Smarty_Internal_Configfileparser::TPC_NAKED_STRING;
+    $this->value = "";
+    $this->yypopstate();
+    }
+
+    public function yylex3()
+    {
+        $tokenMap = array (
+              1 => 0,
+            );
+        if ($this->counter >= ($this->mbstring_overload ? mb_strlen($this->data,'latin1'): strlen($this->data))) {
+            return false; // end of input
+        }
+        $yy_global_pattern = "/\G([^\n]+?(?=[ \t\r]*\n))/iS";
+
+        do {
+            if ($this->mbstring_overload ? preg_match($yy_global_pattern, mb_substr($this->data, $this->counter,2000000000,'latin1'), $yymatches) : preg_match($yy_global_pattern,$this->data, $yymatches, null, $this->counter)) {
+                $yysubmatches = $yymatches;
+                $yymatches = array_filter($yymatches, 'strlen'); // remove empty sub-patterns
+                if (!count($yymatches)) {
+                    throw new Exception('Error: lexing failed because a rule matched' .
+                        ' an empty string.  Input "' . substr($this->data,
+                        $this->counter, 5) . '... state NAKED_STRING_VALUE');
+                }
+                next($yymatches); // skip global match
+                $this->token = key($yymatches); // token number
+                if ($tokenMap[$this->token]) {
+                    // extract sub-patterns for passing to lex function
+                    $yysubmatches = array_slice($yysubmatches, $this->token + 1,
+                        $tokenMap[$this->token]);
+                } else {
+                    $yysubmatches = array();
+                }
+                $this->value = current($yymatches); // token value
+                $r = $this->{'yy_r3_' . $this->token}($yysubmatches);
+                if ($r === null) {
+                    $this->counter += ($this->mbstring_overload ? mb_strlen($this->value,'latin1'): strlen($this->value));
+                    $this->line += substr_count($this->value, "\n");
+                    // accept this token
+                    return true;
+                } elseif ($r === true) {
+                    // we have changed state
+                    // process this token in the new state
+                    return $this->yylex();
+                } elseif ($r === false) {
+                    $this->counter += ($this->mbstring_overload ? mb_strlen($this->value,'latin1'): strlen($this->value));
+                    $this->line += substr_count($this->value, "\n");
+                    if ($this->counter >= ($this->mbstring_overload ? mb_strlen($this->data,'latin1'): strlen($this->data))) {
+                        return false; // end of input
+                    }
+                    // skip this token
+                    continue;
+                }            } else {
+                throw new Exception('Unexpected input at line' . $this->line .
+                    ': ' . $this->data[$this->counter]);
+            }
+            break;
+        } while (true);
+
+    } // end function
+
+    const NAKED_STRING_VALUE = 3;
+    public function yy_r3_1($yy_subpatterns)
+    {
+
+    $this->token = Smarty_Internal_Configfileparser::TPC_NAKED_STRING;
+    $this->yypopstate();
+    }
+
+    public function yylex4()
+    {
+        $tokenMap = array (
+              1 => 0,
+              2 => 0,
+              3 => 0,
+            );
+        if ($this->counter >= ($this->mbstring_overload ? mb_strlen($this->data,'latin1'): strlen($this->data))) {
+            return false; // end of input
+        }
+        $yy_global_pattern = "/\G([ \t\r]+)|\G([^\n]+?(?=[ \t\r]*\n))|\G(\n)/iS";
+
+        do {
+            if ($this->mbstring_overload ? preg_match($yy_global_pattern, mb_substr($this->data, $this->counter,2000000000,'latin1'), $yymatches) : preg_match($yy_global_pattern,$this->data, $yymatches, null, $this->counter)) {
+                $yysubmatches = $yymatches;
+                $yymatches = array_filter($yymatches, 'strlen'); // remove empty sub-patterns
+                if (!count($yymatches)) {
+                    throw new Exception('Error: lexing failed because a rule matched' .
+                        ' an empty string.  Input "' . substr($this->data,
+                        $this->counter, 5) . '... state COMMENT');
+                }
+                next($yymatches); // skip global match
+                $this->token = key($yymatches); // token number
+                if ($tokenMap[$this->token]) {
+                    // extract sub-patterns for passing to lex function
+                    $yysubmatches = array_slice($yysubmatches, $this->token + 1,
+                        $tokenMap[$this->token]);
+                } else {
+                    $yysubmatches = array();
+                }
+                $this->value = current($yymatches); // token value
+                $r = $this->{'yy_r4_' . $this->token}($yysubmatches);
+                if ($r === null) {
+                    $this->counter += ($this->mbstring_overload ? mb_strlen($this->value,'latin1'): strlen($this->value));
+                    $this->line += substr_count($this->value, "\n");
+                    // accept this token
+                    return true;
+                } elseif ($r === true) {
+                    // we have changed state
+                    // process this token in the new state
+                    return $this->yylex();
+                } elseif ($r === false) {
+                    $this->counter += ($this->mbstring_overload ? mb_strlen($this->value,'latin1'): strlen($this->value));
+                    $this->line += substr_count($this->value, "\n");
+                    if ($this->counter >= ($this->mbstring_overload ? mb_strlen($this->data,'latin1'): strlen($this->data))) {
+                        return false; // end of input
+                    }
+                    // skip this token
+                    continue;
+                }            } else {
+                throw new Exception('Unexpected input at line' . $this->line .
+                    ': ' . $this->data[$this->counter]);
+            }
+            break;
+        } while (true);
+
+    } // end function
+
+    const COMMENT = 4;
+    public function yy_r4_1($yy_subpatterns)
+    {
+    return false;
+    }
+    public function yy_r4_2($yy_subpatterns)
+    {
+
+    $this->token = Smarty_Internal_Configfileparser::TPC_NAKED_STRING;
+    }
+    public function yy_r4_3($yy_subpatterns)
+    {
+
+    $this->token = Smarty_Internal_Configfileparser::TPC_NEWLINE;
+    $this->yypopstate();
+    }
+
+    public function yylex5()
+    {
+        $tokenMap = array (
+              1 => 0,
+              2 => 0,
+            );
+        if ($this->counter >= ($this->mbstring_overload ? mb_strlen($this->data,'latin1'): strlen($this->data))) {
+            return false; // end of input
+        }
+        $yy_global_pattern = "/\G(\\.)|\G(.*?(?=[\.=[\]\r\n]))/iS";
+
+        do {
+            if ($this->mbstring_overload ? preg_match($yy_global_pattern, mb_substr($this->data, $this->counter,2000000000,'latin1'), $yymatches) : preg_match($yy_global_pattern,$this->data, $yymatches, null, $this->counter)) {
+                $yysubmatches = $yymatches;
+                $yymatches = array_filter($yymatches, 'strlen'); // remove empty sub-patterns
+                if (!count($yymatches)) {
+                    throw new Exception('Error: lexing failed because a rule matched' .
+                        ' an empty string.  Input "' . substr($this->data,
+                        $this->counter, 5) . '... state SECTION');
+                }
+                next($yymatches); // skip global match
+                $this->token = key($yymatches); // token number
+                if ($tokenMap[$this->token]) {
+                    // extract sub-patterns for passing to lex function
+                    $yysubmatches = array_slice($yysubmatches, $this->token + 1,
+                        $tokenMap[$this->token]);
+                } else {
+                    $yysubmatches = array();
+                }
+                $this->value = current($yymatches); // token value
+                $r = $this->{'yy_r5_' . $this->token}($yysubmatches);
+                if ($r === null) {
+                    $this->counter += ($this->mbstring_overload ? mb_strlen($this->value,'latin1'): strlen($this->value));
+                    $this->line += substr_count($this->value, "\n");
+                    // accept this token
+                    return true;
+                } elseif ($r === true) {
+                    // we have changed state
+                    // process this token in the new state
+                    return $this->yylex();
+                } elseif ($r === false) {
+                    $this->counter += ($this->mbstring_overload ? mb_strlen($this->value,'latin1'): strlen($this->value));
+                    $this->line += substr_count($this->value, "\n");
+                    if ($this->counter >= ($this->mbstring_overload ? mb_strlen($this->data,'latin1'): strlen($this->data))) {
+                        return false; // end of input
+                    }
+                    // skip this token
+                    continue;
+                }            } else {
+                throw new Exception('Unexpected input at line' . $this->line .
+                    ': ' . $this->data[$this->counter]);
+            }
+            break;
+        } while (true);
+
+    } // end function
+
+    const SECTION = 5;
+    public function yy_r5_1($yy_subpatterns)
+    {
+
+    $this->token = Smarty_Internal_Configfileparser::TPC_DOT;
+    }
+    public function yy_r5_2($yy_subpatterns)
+    {
+
+    $this->token = Smarty_Internal_Configfileparser::TPC_SECTION;
+    $this->yypopstate();
+    }
+
+    public function yylex6()
+    {
+        $tokenMap = array (
+              1 => 0,
+              2 => 0,
+            );
+        if ($this->counter >= ($this->mbstring_overload ? mb_strlen($this->data,'latin1'): strlen($this->data))) {
+            return false; // end of input
+        }
+        $yy_global_pattern = "/\G(\"\"\"(?=[ \t\r]*[\n#;]))|\G([\S\s])/iS";
+
+        do {
+            if ($this->mbstring_overload ? preg_match($yy_global_pattern, mb_substr($this->data, $this->counter,2000000000,'latin1'), $yymatches) : preg_match($yy_global_pattern,$this->data, $yymatches, null, $this->counter)) {
+                $yysubmatches = $yymatches;
+                $yymatches = array_filter($yymatches, 'strlen'); // remove empty sub-patterns
+                if (!count($yymatches)) {
+                    throw new Exception('Error: lexing failed because a rule matched' .
+                        ' an empty string.  Input "' . substr($this->data,
+                        $this->counter, 5) . '... state TRIPPLE');
+                }
+                next($yymatches); // skip global match
+                $this->token = key($yymatches); // token number
+                if ($tokenMap[$this->token]) {
+                    // extract sub-patterns for passing to lex function
+                    $yysubmatches = array_slice($yysubmatches, $this->token + 1,
+                        $tokenMap[$this->token]);
+                } else {
+                    $yysubmatches = array();
+                }
+                $this->value = current($yymatches); // token value
+                $r = $this->{'yy_r6_' . $this->token}($yysubmatches);
+                if ($r === null) {
+                    $this->counter += ($this->mbstring_overload ? mb_strlen($this->value,'latin1'): strlen($this->value));
+                    $this->line += substr_count($this->value, "\n");
+                    // accept this token
+                    return true;
+                } elseif ($r === true) {
+                    // we have changed state
+                    // process this token in the new state
+                    return $this->yylex();
+                } elseif ($r === false) {
+                    $this->counter += ($this->mbstring_overload ? mb_strlen($this->value,'latin1'): strlen($this->value));
+                    $this->line += substr_count($this->value, "\n");
+                    if ($this->counter >= ($this->mbstring_overload ? mb_strlen($this->data,'latin1'): strlen($this->data))) {
+                        return false; // end of input
+                    }
+                    // skip this token
+                    continue;
+                }            } else {
+                throw new Exception('Unexpected input at line' . $this->line .
+                    ': ' . $this->data[$this->counter]);
+            }
+            break;
+        } while (true);
+
+    } // end function
+
+    const TRIPPLE = 6;
+    public function yy_r6_1($yy_subpatterns)
+    {
+
+    $this->token = Smarty_Internal_Configfileparser::TPC_TRIPPLE_QUOTES_END;
+    $this->yypopstate();
+    $this->yypushstate(self::START);
+    }
+    public function yy_r6_2($yy_subpatterns)
+    {
+
+  if ($this->mbstring_overload) {
+    $to = mb_strlen($this->data,'latin1');
+  } else {
+    $to = strlen($this->data);
+  }
+  preg_match("/\"\"\"[ \t\r]*[\n#;]/",$this->data,$match,PREG_OFFSET_CAPTURE,$this->counter);
+  if (isset($match[0][1])) {
+    $to = $match[0][1];
+  } else {
+    $this->compiler->trigger_template_error ("missing or misspelled literal closing tag");
+  }
+  if ($this->mbstring_overload) {
+    $this->value = mb_substr($this->data,$this->counter,$to-$this->counter,'latin1');
+  } else {
+    $this->value = substr($this->data,$this->counter,$to-$this->counter);
+  }
+  $this->token = Smarty_Internal_Configfileparser::TPC_TRIPPLE_TEXT;
+    }
+
+}

resources/templates/engine/smarty/sysplugins/smarty_internal_configfileparser.php

@@ -0,0 +1,953 @@
+<?php
+/**
+* Smarty Internal Plugin Configfileparser
+*
+* This is the config file parser.
+* It is generated from the internal.configfileparser.y file
+* @package Smarty
+* @subpackage Compiler
+* @author Uwe Tews
+*/
+
+class TPC_yyToken implements ArrayAccess
+{
+    public $string = '';
+    public $metadata = array();
+
+    public function __construct($s, $m = array())
+    {
+        if ($s instanceof TPC_yyToken) {
+            $this->string = $s->string;
+            $this->metadata = $s->metadata;
+        } else {
+            $this->string = (string) $s;
+            if ($m instanceof TPC_yyToken) {
+                $this->metadata = $m->metadata;
+            } elseif (is_array($m)) {
+                $this->metadata = $m;
+            }
+        }
+    }
+
+    public function __toString()
+    {
+        return $this->_string;
+    }
+
+    public function offsetExists($offset)
+    {
+        return isset($this->metadata[$offset]);
+    }
+
+    public function offsetGet($offset)
+    {
+        return $this->metadata[$offset];
+    }
+
+    public function offsetSet($offset, $value)
+    {
+        if ($offset === null) {
+            if (isset($value[0])) {
+                $x = ($value instanceof TPC_yyToken) ?
+                    $value->metadata : $value;
+                $this->metadata = array_merge($this->metadata, $x);
+
+                return;
+            }
+            $offset = count($this->metadata);
+        }
+        if ($value === null) {
+            return;
+        }
+        if ($value instanceof TPC_yyToken) {
+            if ($value->metadata) {
+                $this->metadata[$offset] = $value->metadata;
+            }
+        } elseif ($value) {
+            $this->metadata[$offset] = $value;
+        }
+    }
+
+    public function offsetUnset($offset)
+    {
+        unset($this->metadata[$offset]);
+    }
+}
+
+class TPC_yyStackEntry
+{
+    public $stateno;       /* The state-number */
+    public $major;         /* The major token value.  This is the code
+                     ** number for the token at this stack level */
+    public $minor; /* The user-supplied minor token value.  This
+                     ** is the value of the token  */
+};
+
+#line 12 "smarty_internal_configfileparser.y"
+class Smarty_Internal_Configfileparser#line 79 "smarty_internal_configfileparser.php"
+{
+#line 14 "smarty_internal_configfileparser.y"
+
+    // states whether the parse was successful or not
+    public $successful = true;
+    public $retvalue = 0;
+    private $lex;
+    private $internalError = false;
+
+    public function __construct($lex, $compiler)
+    {
+        // set instance object
+        self::instance($this);
+        $this->lex = $lex;
+        $this->smarty = $compiler->smarty;
+        $this->compiler = $compiler;
+    }
+    public static function &instance($new_instance = null)
+    {
+        static $instance = null;
+        if (isset($new_instance) && is_object($new_instance))
+            $instance = $new_instance;
+
+        return $instance;
+    }
+
+    private function parse_bool($str)
+    {
+        if (in_array(strtolower($str) ,array('on','yes','true'))) {
+            $res = true;
+        } else {
+            $res = false;
+        }
+
+        return $res;
+    }
+
+    private static $escapes_single = Array('\\' => '\\',
+                                          '\'' => '\'');
+    private static function parse_single_quoted_string($qstr)
+    {
+        $escaped_string = substr($qstr, 1, strlen($qstr)-2); //remove outer quotes
+
+        $ss = preg_split('/(\\\\.)/', $escaped_string, -1, PREG_SPLIT_DELIM_CAPTURE);
+
+        $str = "";
+        foreach ($ss as $s) {
+            if (strlen($s) === 2 && $s[0] === '\\') {
+                if (isset(self::$escapes_single[$s[1]])) {
+                    $s = self::$escapes_single[$s[1]];
+                }
+             }
+
+             $str .= $s;
+        }
+
+        return $str;
+    }
+
+    private static function parse_double_quoted_string($qstr)
+    {
+        $inner_str = substr($qstr, 1, strlen($qstr)-2);
+
+        return stripcslashes($inner_str);
+    }
+
+    private static function parse_tripple_double_quoted_string($qstr)
+    {
+        return stripcslashes($qstr);
+    }
+
+    private function set_var(Array $var, Array &$target_array)
+    {
+        $key = $var["key"];
+        $value = $var["value"];
+
+        if ($this->smarty->config_overwrite || !isset($target_array['vars'][$key])) {
+            $target_array['vars'][$key] = $value;
+        } else {
+            settype($target_array['vars'][$key], 'array');
+            $target_array['vars'][$key][] = $value;
+        }
+    }
+
+    private function add_global_vars(Array $vars)
+    {
+        if (!isset($this->compiler->config_data['vars'])) {
+      $this->compiler->config_data['vars'] = Array();
+        }
+        foreach ($vars as $var) {
+            $this->set_var($var, $this->compiler->config_data);
+        }
+    }
+
+    private function add_section_vars($section_name, Array $vars)
+    {
+        if (!isset($this->compiler->config_data['sections'][$section_name]['vars'])) {
+            $this->compiler->config_data['sections'][$section_name]['vars'] = Array();
+        }
+        foreach ($vars as $var) {
+            $this->set_var($var, $this->compiler->config_data['sections'][$section_name]);
+        }
+    }
+#line 173 "smarty_internal_configfileparser.php"
+
+    const TPC_OPENB                          =  1;
+    const TPC_SECTION                        =  2;
+    const TPC_CLOSEB                         =  3;
+    const TPC_DOT                            =  4;
+    const TPC_ID                             =  5;
+    const TPC_EQUAL                          =  6;
+    const TPC_FLOAT                          =  7;
+    const TPC_INT                            =  8;
+    const TPC_BOOL                           =  9;
+    const TPC_SINGLE_QUOTED_STRING           = 10;
+    const TPC_DOUBLE_QUOTED_STRING           = 11;
+    const TPC_TRIPPLE_QUOTES                 = 12;
+    const TPC_TRIPPLE_TEXT                   = 13;
+    const TPC_TRIPPLE_QUOTES_END             = 14;
+    const TPC_NAKED_STRING                   = 15;
+    const TPC_OTHER                          = 16;
+    const TPC_NEWLINE                        = 17;
+    const TPC_COMMENTSTART                   = 18;
+    const YY_NO_ACTION = 60;
+    const YY_ACCEPT_ACTION = 59;
+    const YY_ERROR_ACTION = 58;
+
+    const YY_SZ_ACTTAB = 38;
+static public $yy_action = array(
+ /*     0 */    29,   30,   34,   33,   24,   13,   19,   25,   35,   21,
+ /*    10 */    59,    8,    3,    1,   20,   12,   14,   31,   20,   12,
+ /*    20 */    15,   17,   23,   18,   27,   26,    4,    5,    6,   32,
+ /*    30 */     2,   11,   28,   22,   16,    9,    7,   10,
+    );
+    public static $yy_lookahead = array(
+ /*     0 */     7,    8,    9,   10,   11,   12,    5,   27,   15,   16,
+ /*    10 */    20,   21,   23,   23,   17,   18,   13,   14,   17,   18,
+ /*    20 */    15,    2,   17,    4,   25,   26,    6,    3,    3,   14,
+ /*    30 */    23,    1,   24,   17,    2,   25,   22,   25,
+);
+    const YY_SHIFT_USE_DFLT = -8;
+    const YY_SHIFT_MAX = 19;
+    public static $yy_shift_ofst = array(
+ /*     0 */    -8,    1,    1,    1,   -7,   -3,   -3,   30,   -8,   -8,
+ /*    10 */    -8,   19,    5,    3,   15,   16,   24,   25,   32,   20,
+);
+    const YY_REDUCE_USE_DFLT = -21;
+    const YY_REDUCE_MAX = 10;
+    public static $yy_reduce_ofst = array(
+ /*     0 */   -10,   -1,   -1,   -1,  -20,   10,   12,    8,   14,    7,
+ /*    10 */   -11,
+);
+    public static $yyExpectedTokens = array(
+        /* 0 */ array(),
+        /* 1 */ array(5, 17, 18, ),
+        /* 2 */ array(5, 17, 18, ),
+        /* 3 */ array(5, 17, 18, ),
+        /* 4 */ array(7, 8, 9, 10, 11, 12, 15, 16, ),
+        /* 5 */ array(17, 18, ),
+        /* 6 */ array(17, 18, ),
+        /* 7 */ array(1, ),
+        /* 8 */ array(),
+        /* 9 */ array(),
+        /* 10 */ array(),
+        /* 11 */ array(2, 4, ),
+        /* 12 */ array(15, 17, ),
+        /* 13 */ array(13, 14, ),
+        /* 14 */ array(14, ),
+        /* 15 */ array(17, ),
+        /* 16 */ array(3, ),
+        /* 17 */ array(3, ),
+        /* 18 */ array(2, ),
+        /* 19 */ array(6, ),
+        /* 20 */ array(),
+        /* 21 */ array(),
+        /* 22 */ array(),
+        /* 23 */ array(),
+        /* 24 */ array(),
+        /* 25 */ array(),
+        /* 26 */ array(),
+        /* 27 */ array(),
+        /* 28 */ array(),
+        /* 29 */ array(),
+        /* 30 */ array(),
+        /* 31 */ array(),
+        /* 32 */ array(),
+        /* 33 */ array(),
+        /* 34 */ array(),
+        /* 35 */ array(),
+);
+    public static $yy_default = array(
+ /*     0 */    44,   37,   41,   40,   58,   58,   58,   36,   39,   44,
+ /*    10 */    44,   58,   58,   58,   58,   58,   58,   58,   58,   58,
+ /*    20 */    55,   54,   57,   56,   50,   45,   43,   42,   38,   46,
+ /*    30 */    47,   52,   51,   49,   48,   53,
+);
+    const YYNOCODE = 29;
+    const YYSTACKDEPTH = 100;
+    const YYNSTATE = 36;
+    const YYNRULE = 22;
+    const YYERRORSYMBOL = 19;
+    const YYERRSYMDT = 'yy0';
+    const YYFALLBACK = 0;
+    public static $yyFallback = array(
+    );
+    public static function Trace($TraceFILE, $zTracePrompt)
+    {
+        if (!$TraceFILE) {
+            $zTracePrompt = 0;
+        } elseif (!$zTracePrompt) {
+            $TraceFILE = 0;
+        }
+        self::$yyTraceFILE = $TraceFILE;
+        self::$yyTracePrompt = $zTracePrompt;
+    }
+
+    public static function PrintTrace()
+    {
+        self::$yyTraceFILE = fopen('php://output', 'w');
+        self::$yyTracePrompt = '<br>';
+    }
+
+    public static $yyTraceFILE;
+    public static $yyTracePrompt;
+    public $yyidx;                    /* Index of top element in stack */
+    public $yyerrcnt;                 /* Shifts left before out of the error */
+    public $yystack = array();  /* The parser's stack */
+
+    public $yyTokenName = array(
+  '$',             'OPENB',         'SECTION',       'CLOSEB',
+  'DOT',           'ID',            'EQUAL',         'FLOAT',
+  'INT',           'BOOL',          'SINGLE_QUOTED_STRING',  'DOUBLE_QUOTED_STRING',
+  'TRIPPLE_QUOTES',  'TRIPPLE_TEXT',  'TRIPPLE_QUOTES_END',  'NAKED_STRING',
+  'OTHER',         'NEWLINE',       'COMMENTSTART',  'error',
+  'start',         'global_vars',   'sections',      'var_list',
+  'section',       'newline',       'var',           'value',
+    );
+
+    public static $yyRuleName = array(
+ /*   0 */ "start ::= global_vars sections",
+ /*   1 */ "global_vars ::= var_list",
+ /*   2 */ "sections ::= sections section",
+ /*   3 */ "sections ::=",
+ /*   4 */ "section ::= OPENB SECTION CLOSEB newline var_list",
+ /*   5 */ "section ::= OPENB DOT SECTION CLOSEB newline var_list",
+ /*   6 */ "var_list ::= var_list newline",
+ /*   7 */ "var_list ::= var_list var",
+ /*   8 */ "var_list ::=",
+ /*   9 */ "var ::= ID EQUAL value",
+ /*  10 */ "value ::= FLOAT",
+ /*  11 */ "value ::= INT",
+ /*  12 */ "value ::= BOOL",
+ /*  13 */ "value ::= SINGLE_QUOTED_STRING",
+ /*  14 */ "value ::= DOUBLE_QUOTED_STRING",
+ /*  15 */ "value ::= TRIPPLE_QUOTES TRIPPLE_TEXT TRIPPLE_QUOTES_END",
+ /*  16 */ "value ::= TRIPPLE_QUOTES TRIPPLE_QUOTES_END",
+ /*  17 */ "value ::= NAKED_STRING",
+ /*  18 */ "value ::= OTHER",
+ /*  19 */ "newline ::= NEWLINE",
+ /*  20 */ "newline ::= COMMENTSTART NEWLINE",
+ /*  21 */ "newline ::= COMMENTSTART NAKED_STRING NEWLINE",
+    );
+
+    public function tokenName($tokenType)
+    {
+        if ($tokenType === 0) {
+            return 'End of Input';
+        }
+        if ($tokenType > 0 && $tokenType < count($this->yyTokenName)) {
+            return $this->yyTokenName[$tokenType];
+        } else {
+            return "Unknown";
+        }
+    }
+
+    public static function yy_destructor($yymajor, $yypminor)
+    {
+        switch ($yymajor) {
+            default:  break;   /* If no destructor action specified: do nothing */
+        }
+    }
+
+    public function yy_pop_parser_stack()
+    {
+        if (!count($this->yystack)) {
+            return;
+        }
+        $yytos = array_pop($this->yystack);
+        if (self::$yyTraceFILE && $this->yyidx >= 0) {
+            fwrite(self::$yyTraceFILE,
+                self::$yyTracePrompt . 'Popping ' . $this->yyTokenName[$yytos->major] .
+                    "\n");
+        }
+        $yymajor = $yytos->major;
+        self::yy_destructor($yymajor, $yytos->minor);
+        $this->yyidx--;
+
+        return $yymajor;
+    }
+
+    public function __destruct()
+    {
+        while ($this->yystack !== Array()) {
+            $this->yy_pop_parser_stack();
+        }
+        if (is_resource(self::$yyTraceFILE)) {
+            fclose(self::$yyTraceFILE);
+        }
+    }
+
+    public function yy_get_expected_tokens($token)
+    {
+        $state = $this->yystack[$this->yyidx]->stateno;
+        $expected = self::$yyExpectedTokens[$state];
+        if (in_array($token, self::$yyExpectedTokens[$state], true)) {
+            return $expected;
+        }
+        $stack = $this->yystack;
+        $yyidx = $this->yyidx;
+        do {
+            $yyact = $this->yy_find_shift_action($token);
+            if ($yyact >= self::YYNSTATE && $yyact < self::YYNSTATE + self::YYNRULE) {
+                // reduce action
+                $done = 0;
+                do {
+                    if ($done++ == 100) {
+                        $this->yyidx = $yyidx;
+                        $this->yystack = $stack;
+                        // too much recursion prevents proper detection
+                        // so give up
+                        return array_unique($expected);
+                    }
+                    $yyruleno = $yyact - self::YYNSTATE;
+                    $this->yyidx -= self::$yyRuleInfo[$yyruleno]['rhs'];
+                    $nextstate = $this->yy_find_reduce_action(
+                        $this->yystack[$this->yyidx]->stateno,
+                        self::$yyRuleInfo[$yyruleno]['lhs']);
+                    if (isset(self::$yyExpectedTokens[$nextstate])) {
+                $expected = array_merge($expected, self::$yyExpectedTokens[$nextstate]);
+                            if (in_array($token,
+                                  self::$yyExpectedTokens[$nextstate], true)) {
+                            $this->yyidx = $yyidx;
+                            $this->yystack = $stack;
+
+                            return array_unique($expected);
+                        }
+                    }
+                    if ($nextstate < self::YYNSTATE) {
+                        // we need to shift a non-terminal
+                        $this->yyidx++;
+                        $x = new TPC_yyStackEntry;
+                        $x->stateno = $nextstate;
+                        $x->major = self::$yyRuleInfo[$yyruleno]['lhs'];
+                        $this->yystack[$this->yyidx] = $x;
+                        continue 2;
+                    } elseif ($nextstate == self::YYNSTATE + self::YYNRULE + 1) {
+                        $this->yyidx = $yyidx;
+                        $this->yystack = $stack;
+                        // the last token was just ignored, we can't accept
+                        // by ignoring input, this is in essence ignoring a
+                        // syntax error!
+                        return array_unique($expected);
+                    } elseif ($nextstate === self::YY_NO_ACTION) {
+                        $this->yyidx = $yyidx;
+                        $this->yystack = $stack;
+                        // input accepted, but not shifted (I guess)
+                        return $expected;
+                    } else {
+                        $yyact = $nextstate;
+                    }
+                } while (true);
+            }
+            break;
+        } while (true);
+    $this->yyidx = $yyidx;
+    $this->yystack = $stack;
+
+        return array_unique($expected);
+    }
+
+    public function yy_is_expected_token($token)
+    {
+        if ($token === 0) {
+            return true; // 0 is not part of this
+        }
+        $state = $this->yystack[$this->yyidx]->stateno;
+        if (in_array($token, self::$yyExpectedTokens[$state], true)) {
+            return true;
+        }
+        $stack = $this->yystack;
+        $yyidx = $this->yyidx;
+        do {
+            $yyact = $this->yy_find_shift_action($token);
+            if ($yyact >= self::YYNSTATE && $yyact < self::YYNSTATE + self::YYNRULE) {
+                // reduce action
+                $done = 0;
+                do {
+                    if ($done++ == 100) {
+                        $this->yyidx = $yyidx;
+                        $this->yystack = $stack;
+                        // too much recursion prevents proper detection
+                        // so give up
+                        return true;
+                    }
+                    $yyruleno = $yyact - self::YYNSTATE;
+                    $this->yyidx -= self::$yyRuleInfo[$yyruleno]['rhs'];
+                    $nextstate = $this->yy_find_reduce_action(
+                        $this->yystack[$this->yyidx]->stateno,
+                        self::$yyRuleInfo[$yyruleno]['lhs']);
+                    if (isset(self::$yyExpectedTokens[$nextstate]) &&
+                          in_array($token, self::$yyExpectedTokens[$nextstate], true)) {
+                        $this->yyidx = $yyidx;
+                        $this->yystack = $stack;
+
+                        return true;
+                    }
+                    if ($nextstate < self::YYNSTATE) {
+                        // we need to shift a non-terminal
+                        $this->yyidx++;
+                        $x = new TPC_yyStackEntry;
+                        $x->stateno = $nextstate;
+                        $x->major = self::$yyRuleInfo[$yyruleno]['lhs'];
+                        $this->yystack[$this->yyidx] = $x;
+                        continue 2;
+                    } elseif ($nextstate == self::YYNSTATE + self::YYNRULE + 1) {
+                        $this->yyidx = $yyidx;
+                        $this->yystack = $stack;
+                        if (!$token) {
+                            // end of input: this is valid
+                            return true;
+                        }
+                        // the last token was just ignored, we can't accept
+                        // by ignoring input, this is in essence ignoring a
+                        // syntax error!
+                        return false;
+                    } elseif ($nextstate === self::YY_NO_ACTION) {
+                        $this->yyidx = $yyidx;
+                        $this->yystack = $stack;
+                        // input accepted, but not shifted (I guess)
+                        return true;
+                    } else {
+                        $yyact = $nextstate;
+                    }
+                } while (true);
+            }
+            break;
+        } while (true);
+        $this->yyidx = $yyidx;
+        $this->yystack = $stack;
+
+        return true;
+    }
+
+   public function yy_find_shift_action($iLookAhead)
+    {
+        $stateno = $this->yystack[$this->yyidx]->stateno;
+
+        /* if ($this->yyidx < 0) return self::YY_NO_ACTION;  */
+        if (!isset(self::$yy_shift_ofst[$stateno])) {
+            // no shift actions
+            return self::$yy_default[$stateno];
+        }
+        $i = self::$yy_shift_ofst[$stateno];
+        if ($i === self::YY_SHIFT_USE_DFLT) {
+            return self::$yy_default[$stateno];
+        }
+        if ($iLookAhead == self::YYNOCODE) {
+            return self::YY_NO_ACTION;
+        }
+        $i += $iLookAhead;
+        if ($i < 0 || $i >= self::YY_SZ_ACTTAB ||
+              self::$yy_lookahead[$i] != $iLookAhead) {
+            if (count(self::$yyFallback) && $iLookAhead < count(self::$yyFallback)
+                   && ($iFallback = self::$yyFallback[$iLookAhead]) != 0) {
+                if (self::$yyTraceFILE) {
+                    fwrite(self::$yyTraceFILE, self::$yyTracePrompt . "FALLBACK " .
+                        $this->yyTokenName[$iLookAhead] . " => " .
+                        $this->yyTokenName[$iFallback] . "\n");
+                }
+
+                return $this->yy_find_shift_action($iFallback);
+            }
+
+            return self::$yy_default[$stateno];
+        } else {
+            return self::$yy_action[$i];
+        }
+    }
+
+    public function yy_find_reduce_action($stateno, $iLookAhead)
+    {
+        /* $stateno = $this->yystack[$this->yyidx]->stateno; */
+
+        if (!isset(self::$yy_reduce_ofst[$stateno])) {
+            return self::$yy_default[$stateno];
+        }
+        $i = self::$yy_reduce_ofst[$stateno];
+        if ($i == self::YY_REDUCE_USE_DFLT) {
+            return self::$yy_default[$stateno];
+        }
+        if ($iLookAhead == self::YYNOCODE) {
+            return self::YY_NO_ACTION;
+        }
+        $i += $iLookAhead;
+        if ($i < 0 || $i >= self::YY_SZ_ACTTAB ||
+              self::$yy_lookahead[$i] != $iLookAhead) {
+            return self::$yy_default[$stateno];
+        } else {
+            return self::$yy_action[$i];
+        }
+    }
+
+    public function yy_shift($yyNewState, $yyMajor, $yypMinor)
+    {
+        $this->yyidx++;
+        if ($this->yyidx >= self::YYSTACKDEPTH) {
+            $this->yyidx--;
+            if (self::$yyTraceFILE) {
+                fprintf(self::$yyTraceFILE, "%sStack Overflow!\n", self::$yyTracePrompt);
+            }
+            while ($this->yyidx >= 0) {
+                $this->yy_pop_parser_stack();
+            }
+#line 125 "smarty_internal_configfileparser.y"
+
+    $this->internalError = true;
+    $this->compiler->trigger_config_file_error("Stack overflow in configfile parser");
+#line 593 "smarty_internal_configfileparser.php"
+
+            return;
+        }
+        $yytos = new TPC_yyStackEntry;
+        $yytos->stateno = $yyNewState;
+        $yytos->major = $yyMajor;
+        $yytos->minor = $yypMinor;
+        array_push($this->yystack, $yytos);
+        if (self::$yyTraceFILE && $this->yyidx > 0) {
+            fprintf(self::$yyTraceFILE, "%sShift %d\n", self::$yyTracePrompt,
+                $yyNewState);
+            fprintf(self::$yyTraceFILE, "%sStack:", self::$yyTracePrompt);
+            for ($i = 1; $i <= $this->yyidx; $i++) {
+                fprintf(self::$yyTraceFILE, " %s",
+                    $this->yyTokenName[$this->yystack[$i]->major]);
+            }
+            fwrite(self::$yyTraceFILE,"\n");
+        }
+    }
+
+    public static $yyRuleInfo = array(
+  array( 'lhs' => 20, 'rhs' => 2 ),
+  array( 'lhs' => 21, 'rhs' => 1 ),
+  array( 'lhs' => 22, 'rhs' => 2 ),
+  array( 'lhs' => 22, 'rhs' => 0 ),
+  array( 'lhs' => 24, 'rhs' => 5 ),
+  array( 'lhs' => 24, 'rhs' => 6 ),
+  array( 'lhs' => 23, 'rhs' => 2 ),
+  array( 'lhs' => 23, 'rhs' => 2 ),
+  array( 'lhs' => 23, 'rhs' => 0 ),
+  array( 'lhs' => 26, 'rhs' => 3 ),
+  array( 'lhs' => 27, 'rhs' => 1 ),
+  array( 'lhs' => 27, 'rhs' => 1 ),
+  array( 'lhs' => 27, 'rhs' => 1 ),
+  array( 'lhs' => 27, 'rhs' => 1 ),
+  array( 'lhs' => 27, 'rhs' => 1 ),
+  array( 'lhs' => 27, 'rhs' => 3 ),
+  array( 'lhs' => 27, 'rhs' => 2 ),
+  array( 'lhs' => 27, 'rhs' => 1 ),
+  array( 'lhs' => 27, 'rhs' => 1 ),
+  array( 'lhs' => 25, 'rhs' => 1 ),
+  array( 'lhs' => 25, 'rhs' => 2 ),
+  array( 'lhs' => 25, 'rhs' => 3 ),
+    );
+
+    public static $yyReduceMap = array(
+        0 => 0,
+        2 => 0,
+        3 => 0,
+        19 => 0,
+        20 => 0,
+        21 => 0,
+        1 => 1,
+        4 => 4,
+        5 => 5,
+        6 => 6,
+        7 => 7,
+        8 => 8,
+        9 => 9,
+        10 => 10,
+        11 => 11,
+        12 => 12,
+        13 => 13,
+        14 => 14,
+        15 => 15,
+        16 => 16,
+        17 => 17,
+        18 => 17,
+    );
+#line 131 "smarty_internal_configfileparser.y"
+    public function yy_r0()
+    {
+    $this->_retvalue = null;
+    }
+#line 666 "smarty_internal_configfileparser.php"
+#line 136 "smarty_internal_configfileparser.y"
+    public function yy_r1()
+    {
+    $this->add_global_vars($this->yystack[$this->yyidx + 0]->minor); $this->_retvalue = null;
+    }
+#line 671 "smarty_internal_configfileparser.php"
+#line 149 "smarty_internal_configfileparser.y"
+    public function yy_r4()
+    {
+    $this->add_section_vars($this->yystack[$this->yyidx + -3]->minor, $this->yystack[$this->yyidx + 0]->minor);
+    $this->_retvalue = null;
+    }
+#line 677 "smarty_internal_configfileparser.php"
+#line 154 "smarty_internal_configfileparser.y"
+    public function yy_r5()
+    {
+    if ($this->smarty->config_read_hidden) {
+        $this->add_section_vars($this->yystack[$this->yyidx + -3]->minor, $this->yystack[$this->yyidx + 0]->minor);
+    }
+    $this->_retvalue = null;
+    }
+#line 685 "smarty_internal_configfileparser.php"
+#line 162 "smarty_internal_configfileparser.y"
+    public function yy_r6()
+    {
+    $this->_retvalue = $this->yystack[$this->yyidx + -1]->minor;
+    }
+#line 690 "smarty_internal_configfileparser.php"
+#line 166 "smarty_internal_configfileparser.y"
+    public function yy_r7()
+    {
+    $this->_retvalue = array_merge($this->yystack[$this->yyidx + -1]->minor, Array($this->yystack[$this->yyidx + 0]->minor));
+    }
+#line 695 "smarty_internal_configfileparser.php"
+#line 170 "smarty_internal_configfileparser.y"
+    public function yy_r8()
+    {
+    $this->_retvalue = Array();
+    }
+#line 700 "smarty_internal_configfileparser.php"
+#line 176 "smarty_internal_configfileparser.y"
+    public function yy_r9()
+    {
+    $this->_retvalue = Array("key" => $this->yystack[$this->yyidx + -2]->minor, "value" => $this->yystack[$this->yyidx + 0]->minor);
+    }
+#line 705 "smarty_internal_configfileparser.php"
+#line 181 "smarty_internal_configfileparser.y"
+    public function yy_r10()
+    {
+    $this->_retvalue = (float) $this->yystack[$this->yyidx + 0]->minor;
+    }
+#line 710 "smarty_internal_configfileparser.php"
+#line 185 "smarty_internal_configfileparser.y"
+    public function yy_r11()
+    {
+    $this->_retvalue = (int) $this->yystack[$this->yyidx + 0]->minor;
+    }
+#line 715 "smarty_internal_configfileparser.php"
+#line 189 "smarty_internal_configfileparser.y"
+    public function yy_r12()
+    {
+    $this->_retvalue = $this->parse_bool($this->yystack[$this->yyidx + 0]->minor);
+    }
+#line 720 "smarty_internal_configfileparser.php"
+#line 193 "smarty_internal_configfileparser.y"
+    public function yy_r13()
+    {
+    $this->_retvalue = self::parse_single_quoted_string($this->yystack[$this->yyidx + 0]->minor);
+    }
+#line 725 "smarty_internal_configfileparser.php"
+#line 197 "smarty_internal_configfileparser.y"
+    public function yy_r14()
+    {
+    $this->_retvalue = self::parse_double_quoted_string($this->yystack[$this->yyidx + 0]->minor);
+    }
+#line 730 "smarty_internal_configfileparser.php"
+#line 201 "smarty_internal_configfileparser.y"
+    public function yy_r15()
+    {
+    $this->_retvalue = self::parse_tripple_double_quoted_string($this->yystack[$this->yyidx + -1]->minor);
+    }
+#line 735 "smarty_internal_configfileparser.php"
+#line 205 "smarty_internal_configfileparser.y"
+    public function yy_r16()
+    {
+    $this->_retvalue = '';
+    }
+#line 740 "smarty_internal_configfileparser.php"
+#line 209 "smarty_internal_configfileparser.y"
+    public function yy_r17()
+    {
+    $this->_retvalue = $this->yystack[$this->yyidx + 0]->minor;
+    }
+#line 745 "smarty_internal_configfileparser.php"
+
+    private $_retvalue;
+
+    public function yy_reduce($yyruleno)
+    {
+        $yymsp = $this->yystack[$this->yyidx];
+        if (self::$yyTraceFILE && $yyruleno >= 0
+              && $yyruleno < count(self::$yyRuleName)) {
+            fprintf(self::$yyTraceFILE, "%sReduce (%d) [%s].\n",
+                self::$yyTracePrompt, $yyruleno,
+                self::$yyRuleName[$yyruleno]);
+        }
+
+        $this->_retvalue = $yy_lefthand_side = null;
+        if (array_key_exists($yyruleno, self::$yyReduceMap)) {
+            // call the action
+            $this->_retvalue = null;
+            $this->{'yy_r' . self::$yyReduceMap[$yyruleno]}();
+            $yy_lefthand_side = $this->_retvalue;
+        }
+        $yygoto = self::$yyRuleInfo[$yyruleno]['lhs'];
+        $yysize = self::$yyRuleInfo[$yyruleno]['rhs'];
+        $this->yyidx -= $yysize;
+        for ($i = $yysize; $i; $i--) {
+            // pop all of the right-hand side parameters
+            array_pop($this->yystack);
+        }
+        $yyact = $this->yy_find_reduce_action($this->yystack[$this->yyidx]->stateno, $yygoto);
+        if ($yyact < self::YYNSTATE) {
+            if (!self::$yyTraceFILE && $yysize) {
+                $this->yyidx++;
+                $x = new TPC_yyStackEntry;
+                $x->stateno = $yyact;
+                $x->major = $yygoto;
+                $x->minor = $yy_lefthand_side;
+                $this->yystack[$this->yyidx] = $x;
+            } else {
+                $this->yy_shift($yyact, $yygoto, $yy_lefthand_side);
+            }
+        } elseif ($yyact == self::YYNSTATE + self::YYNRULE + 1) {
+            $this->yy_accept();
+        }
+    }
+
+    public function yy_parse_failed()
+    {
+        if (self::$yyTraceFILE) {
+            fprintf(self::$yyTraceFILE, "%sFail!\n", self::$yyTracePrompt);
+        } while ($this->yyidx >= 0) {
+            $this->yy_pop_parser_stack();
+        }
+    }
+
+    public function yy_syntax_error($yymajor, $TOKEN)
+    {
+#line 118 "smarty_internal_configfileparser.y"
+
+    $this->internalError = true;
+    $this->yymajor = $yymajor;
+    $this->compiler->trigger_config_file_error();
+#line 808 "smarty_internal_configfileparser.php"
+    }
+
+    public function yy_accept()
+    {
+        if (self::$yyTraceFILE) {
+            fprintf(self::$yyTraceFILE, "%sAccept!\n", self::$yyTracePrompt);
+        } while ($this->yyidx >= 0) {
+            $stack = $this->yy_pop_parser_stack();
+        }
+#line 110 "smarty_internal_configfileparser.y"
+
+    $this->successful = !$this->internalError;
+    $this->internalError = false;
+    $this->retvalue = $this->_retvalue;
+    //echo $this->retvalue."\n\n";
+#line 826 "smarty_internal_configfileparser.php"
+    }
+
+    public function doParse($yymajor, $yytokenvalue)
+    {
+        $yyerrorhit = 0;   /* True if yymajor has invoked an error */
+
+        if ($this->yyidx === null || $this->yyidx < 0) {
+            $this->yyidx = 0;
+            $this->yyerrcnt = -1;
+            $x = new TPC_yyStackEntry;
+            $x->stateno = 0;
+            $x->major = 0;
+            $this->yystack = array();
+            array_push($this->yystack, $x);
+        }
+        $yyendofinput = ($yymajor==0);
+
+        if (self::$yyTraceFILE) {
+            fprintf(self::$yyTraceFILE, "%sInput %s\n",
+                self::$yyTracePrompt, $this->yyTokenName[$yymajor]);
+        }
+
+        do {
+            $yyact = $this->yy_find_shift_action($yymajor);
+            if ($yymajor < self::YYERRORSYMBOL &&
+                  !$this->yy_is_expected_token($yymajor)) {
+                // force a syntax error
+                $yyact = self::YY_ERROR_ACTION;
+            }
+            if ($yyact < self::YYNSTATE) {
+                $this->yy_shift($yyact, $yymajor, $yytokenvalue);
+                $this->yyerrcnt--;
+                if ($yyendofinput && $this->yyidx >= 0) {
+                    $yymajor = 0;
+                } else {
+                    $yymajor = self::YYNOCODE;
+                }
+            } elseif ($yyact < self::YYNSTATE + self::YYNRULE) {
+                $this->yy_reduce($yyact - self::YYNSTATE);
+            } elseif ($yyact == self::YY_ERROR_ACTION) {
+                if (self::$yyTraceFILE) {
+                    fprintf(self::$yyTraceFILE, "%sSyntax Error!\n",
+                        self::$yyTracePrompt);
+                }
+                if (self::YYERRORSYMBOL) {
+                    if ($this->yyerrcnt < 0) {
+                        $this->yy_syntax_error($yymajor, $yytokenvalue);
+                    }
+                    $yymx = $this->yystack[$this->yyidx]->major;
+                    if ($yymx == self::YYERRORSYMBOL || $yyerrorhit) {
+                        if (self::$yyTraceFILE) {
+                            fprintf(self::$yyTraceFILE, "%sDiscard input token %s\n",
+                                self::$yyTracePrompt, $this->yyTokenName[$yymajor]);
+                        }
+                        $this->yy_destructor($yymajor, $yytokenvalue);
+                        $yymajor = self::YYNOCODE;
+                    } else {
+                        while ($this->yyidx >= 0 &&
+                                 $yymx != self::YYERRORSYMBOL &&
+        ($yyact = $this->yy_find_shift_action(self::YYERRORSYMBOL)) >= self::YYNSTATE
+                              ){
+                            $this->yy_pop_parser_stack();
+                        }
+                        if ($this->yyidx < 0 || $yymajor==0) {
+                            $this->yy_destructor($yymajor, $yytokenvalue);
+                            $this->yy_parse_failed();
+                            $yymajor = self::YYNOCODE;
+                        } elseif ($yymx != self::YYERRORSYMBOL) {
+                            $u2 = 0;
+                            $this->yy_shift($yyact, self::YYERRORSYMBOL, $u2);
+                        }
+                    }
+                    $this->yyerrcnt = 3;
+                    $yyerrorhit = 1;
+                } else {
+                    if ($this->yyerrcnt <= 0) {
+                        $this->yy_syntax_error($yymajor, $yytokenvalue);
+                    }
+                    $this->yyerrcnt = 3;
+                    $this->yy_destructor($yymajor, $yytokenvalue);
+                    if ($yyendofinput) {
+                        $this->yy_parse_failed();
+                    }
+                    $yymajor = self::YYNOCODE;
+                }
+            } else {
+                $this->yy_accept();
+                $yymajor = self::YYNOCODE;
+            }
+        } while ($yymajor != self::YYNOCODE && $this->yyidx >= 0);
+    }
+}

resources/templates/engine/smarty/sysplugins/smarty_internal_data.php

@@ -0,0 +1,561 @@
+<?php
+/**
+ * Smarty Internal Plugin Data
+ *
+ * This file contains the basic classes and methodes for template and variable creation
+ *
+ * @package Smarty
+ * @subpackage Template
+ * @author Uwe Tews
+ */
+
+/**
+ * Base class with template and variable methodes
+ *
+ * @package Smarty
+ * @subpackage Template
+ */
+class Smarty_Internal_Data
+{
+    /**
+     * name of class used for templates
+     *
+     * @var string
+     */
+    public $template_class = 'Smarty_Internal_Template';
+    /**
+     * template variables
+     *
+     * @var array
+     */
+    public $tpl_vars = array();
+    /**
+     * parent template (if any)
+     *
+     * @var Smarty_Internal_Template
+     */
+    public $parent = null;
+    /**
+     * configuration settings
+     *
+     * @var array
+     */
+    public $config_vars = array();
+
+    /**
+     * assigns a Smarty variable
+     *
+     * @param  array|string         $tpl_var the template variable name(s)
+     * @param  mixed                $value   the value to assign
+     * @param  boolean              $nocache if true any output of this variable will be not cached
+     * @param  boolean              $scope   the scope the variable will have  (local,parent or root)
+     * @return Smarty_Internal_Data current Smarty_Internal_Data (or Smarty or Smarty_Internal_Template) instance for chaining
+     */
+    public function assign($tpl_var, $value = null, $nocache = false)
+    {
+        if (is_array($tpl_var)) {
+            foreach ($tpl_var as $_key => $_val) {
+                if ($_key != '') {
+                    $this->tpl_vars[$_key] = new Smarty_variable($_val, $nocache);
+                }
+            }
+        } else {
+            if ($tpl_var != '') {
+                $this->tpl_vars[$tpl_var] = new Smarty_variable($value, $nocache);
+            }
+        }
+
+        return $this;
+    }
+
+    /**
+     * assigns a global Smarty variable
+     *
+     * @param  string               $varname the global variable name
+     * @param  mixed                $value   the value to assign
+     * @param  boolean              $nocache if true any output of this variable will be not cached
+     * @return Smarty_Internal_Data current Smarty_Internal_Data (or Smarty or Smarty_Internal_Template) instance for chaining
+     */
+    public function assignGlobal($varname, $value = null, $nocache = false)
+    {
+        if ($varname != '') {
+            Smarty::$global_tpl_vars[$varname] = new Smarty_variable($value, $nocache);
+            $ptr = $this;
+            while ($ptr instanceof Smarty_Internal_Template) {
+                $ptr->tpl_vars[$varname] = clone Smarty::$global_tpl_vars[$varname];
+                $ptr = $ptr->parent;
+            }
+        }
+
+        return $this;
+    }
+    /**
+     * assigns values to template variables by reference
+     *
+     * @param string $tpl_var the template variable name
+     * @param mixed $ &$value the referenced value to assign
+     * @param  boolean              $nocache if true any output of this variable will be not cached
+     * @return Smarty_Internal_Data current Smarty_Internal_Data (or Smarty or Smarty_Internal_Template) instance for chaining
+     */
+    public function assignByRef($tpl_var, &$value, $nocache = false)
+    {
+        if ($tpl_var != '') {
+            $this->tpl_vars[$tpl_var] = new Smarty_variable(null, $nocache);
+            $this->tpl_vars[$tpl_var]->value = &$value;
+        }
+
+        return $this;
+    }
+
+    /**
+     * appends values to template variables
+     *
+     * @param  array|string         $tpl_var the template variable name(s)
+     * @param  mixed                $value   the value to append
+     * @param  boolean              $merge   flag if array elements shall be merged
+     * @param  boolean              $nocache if true any output of this variable will be not cached
+     * @return Smarty_Internal_Data current Smarty_Internal_Data (or Smarty or Smarty_Internal_Template) instance for chaining
+     */
+    public function append($tpl_var, $value = null, $merge = false, $nocache = false)
+    {
+        if (is_array($tpl_var)) {
+            // $tpl_var is an array, ignore $value
+            foreach ($tpl_var as $_key => $_val) {
+                if ($_key != '') {
+                    if (!isset($this->tpl_vars[$_key])) {
+                        $tpl_var_inst = $this->getVariable($_key, null, true, false);
+                        if ($tpl_var_inst instanceof Undefined_Smarty_Variable) {
+                            $this->tpl_vars[$_key] = new Smarty_variable(null, $nocache);
+                        } else {
+                            $this->tpl_vars[$_key] = clone $tpl_var_inst;
+                        }
+                    }
+                    if (!(is_array($this->tpl_vars[$_key]->value) || $this->tpl_vars[$_key]->value instanceof ArrayAccess)) {
+                        settype($this->tpl_vars[$_key]->value, 'array');
+                    }
+                    if ($merge && is_array($_val)) {
+                        foreach ($_val as $_mkey => $_mval) {
+                            $this->tpl_vars[$_key]->value[$_mkey] = $_mval;
+                        }
+                    } else {
+                        $this->tpl_vars[$_key]->value[] = $_val;
+                    }
+                }
+            }
+        } else {
+            if ($tpl_var != '' && isset($value)) {
+                if (!isset($this->tpl_vars[$tpl_var])) {
+                    $tpl_var_inst = $this->getVariable($tpl_var, null, true, false);
+                    if ($tpl_var_inst instanceof Undefined_Smarty_Variable) {
+                        $this->tpl_vars[$tpl_var] = new Smarty_variable(null, $nocache);
+                    } else {
+                        $this->tpl_vars[$tpl_var] = clone $tpl_var_inst;
+                    }
+                }
+                if (!(is_array($this->tpl_vars[$tpl_var]->value) || $this->tpl_vars[$tpl_var]->value instanceof ArrayAccess)) {
+                    settype($this->tpl_vars[$tpl_var]->value, 'array');
+                }
+                if ($merge && is_array($value)) {
+                    foreach ($value as $_mkey => $_mval) {
+                        $this->tpl_vars[$tpl_var]->value[$_mkey] = $_mval;
+                    }
+                } else {
+                    $this->tpl_vars[$tpl_var]->value[] = $value;
+                }
+            }
+        }
+
+        return $this;
+    }
+
+    /**
+     * appends values to template variables by reference
+     *
+     * @param  string               $tpl_var the template variable name
+     * @param  mixed                &$value  the referenced value to append
+     * @param  boolean              $merge   flag if array elements shall be merged
+     * @return Smarty_Internal_Data current Smarty_Internal_Data (or Smarty or Smarty_Internal_Template) instance for chaining
+     */
+    public function appendByRef($tpl_var, &$value, $merge = false)
+    {
+        if ($tpl_var != '' && isset($value)) {
+            if (!isset($this->tpl_vars[$tpl_var])) {
+                $this->tpl_vars[$tpl_var] = new Smarty_variable();
+            }
+            if (!is_array($this->tpl_vars[$tpl_var]->value)) {
+                settype($this->tpl_vars[$tpl_var]->value, 'array');
+            }
+            if ($merge && is_array($value)) {
+                foreach ($value as $_key => $_val) {
+                    $this->tpl_vars[$tpl_var]->value[$_key] = &$value[$_key];
+                }
+            } else {
+                $this->tpl_vars[$tpl_var]->value[] = &$value;
+            }
+        }
+
+        return $this;
+    }
+
+    /**
+     * Returns a single or all template variables
+     *
+     * @param  string  $varname        variable name or null
+     * @param  string  $_ptr           optional pointer to data object
+     * @param  boolean $search_parents include parent templates?
+     * @return string  variable value or or array of variables
+     */
+    public function getTemplateVars($varname = null, $_ptr = null, $search_parents = true)
+    {
+        if (isset($varname)) {
+            $_var = $this->getVariable($varname, $_ptr, $search_parents, false);
+            if (is_object($_var)) {
+                return $_var->value;
+            } else {
+                return null;
+            }
+        } else {
+            $_result = array();
+            if ($_ptr === null) {
+                $_ptr = $this;
+            } while ($_ptr !== null) {
+                foreach ($_ptr->tpl_vars AS $key => $var) {
+                    if (!array_key_exists($key, $_result)) {
+                        $_result[$key] = $var->value;
+                    }
+                }
+                // not found, try at parent
+                if ($search_parents) {
+                    $_ptr = $_ptr->parent;
+                } else {
+                    $_ptr = null;
+                }
+            }
+            if ($search_parents && isset(Smarty::$global_tpl_vars)) {
+                foreach (Smarty::$global_tpl_vars AS $key => $var) {
+                    if (!array_key_exists($key, $_result)) {
+                        $_result[$key] = $var->value;
+                    }
+                }
+            }
+
+            return $_result;
+        }
+    }
+
+    /**
+     * clear the given assigned template variable.
+     *
+     * @param  string|array         $tpl_var the template variable(s) to clear
+     * @return Smarty_Internal_Data current Smarty_Internal_Data (or Smarty or Smarty_Internal_Template) instance for chaining
+     */
+    public function clearAssign($tpl_var)
+    {
+        if (is_array($tpl_var)) {
+            foreach ($tpl_var as $curr_var) {
+                unset($this->tpl_vars[$curr_var]);
+            }
+        } else {
+            unset($this->tpl_vars[$tpl_var]);
+        }
+
+        return $this;
+    }
+
+    /**
+     * clear all the assigned template variables.
+     * @return Smarty_Internal_Data current Smarty_Internal_Data (or Smarty or Smarty_Internal_Template) instance for chaining
+     */
+    public function clearAllAssign()
+    {
+        $this->tpl_vars = array();
+
+        return $this;
+    }
+
+    /**
+     * load a config file, optionally load just selected sections
+     *
+     * @param  string               $config_file filename
+     * @param  mixed                $sections    array of section names, single section or null
+     * @return Smarty_Internal_Data current Smarty_Internal_Data (or Smarty or Smarty_Internal_Template) instance for chaining
+     */
+    public function configLoad($config_file, $sections = null)
+    {
+        // load Config class
+        $config = new Smarty_Internal_Config($config_file, $this->smarty, $this);
+        $config->loadConfigVars($sections);
+
+        return $this;
+    }
+
+    /**
+     * gets the object of a Smarty variable
+     *
+     * @param  string  $variable       the name of the Smarty variable
+     * @param  object  $_ptr           optional pointer to data object
+     * @param  boolean $search_parents search also in parent data
+     * @return object  the object of the variable
+     */
+    public function getVariable($variable, $_ptr = null, $search_parents = true, $error_enable = true)
+    {
+        if ($_ptr === null) {
+            $_ptr = $this;
+        } while ($_ptr !== null) {
+            if (isset($_ptr->tpl_vars[$variable])) {
+                // found it, return it
+                return $_ptr->tpl_vars[$variable];
+            }
+            // not found, try at parent
+            if ($search_parents) {
+                $_ptr = $_ptr->parent;
+            } else {
+                $_ptr = null;
+            }
+        }
+        if (isset(Smarty::$global_tpl_vars[$variable])) {
+            // found it, return it
+            return Smarty::$global_tpl_vars[$variable];
+        }
+        if ($this->smarty->error_unassigned && $error_enable) {
+            // force a notice
+            $x = $$variable;
+        }
+
+        return new Undefined_Smarty_Variable;
+    }
+
+    /**
+     * gets  a config variable
+     *
+     * @param  string $variable the name of the config variable
+     * @return mixed  the value of the config variable
+     */
+    public function getConfigVariable($variable, $error_enable = true)
+    {
+        $_ptr = $this;
+        while ($_ptr !== null) {
+            if (isset($_ptr->config_vars[$variable])) {
+                // found it, return it
+                return $_ptr->config_vars[$variable];
+            }
+            // not found, try at parent
+            $_ptr = $_ptr->parent;
+        }
+        if ($this->smarty->error_unassigned && $error_enable) {
+            // force a notice
+            $x = $$variable;
+        }
+
+        return null;
+    }
+
+    /**
+     * gets  a stream variable
+     *
+     * @param  string $variable the stream of the variable
+     * @return mixed  the value of the stream variable
+     */
+    public function getStreamVariable($variable)
+    {
+        $_result = '';
+        $fp = fopen($variable, 'r+');
+        if ($fp) {
+            while (!feof($fp) && ($current_line = fgets($fp)) !== false ) {
+                $_result .= $current_line;
+            }
+            fclose($fp);
+
+            return $_result;
+        }
+
+        if ($this->smarty->error_unassigned) {
+            throw new SmartyException('Undefined stream variable "' . $variable . '"');
+        } else {
+            return null;
+        }
+    }
+
+    /**
+     * Returns a single or all config variables
+     *
+     * @param  string $varname variable name or null
+     * @return string variable value or or array of variables
+     */
+    public function getConfigVars($varname = null, $search_parents = true)
+    {
+        $_ptr = $this;
+        $var_array = array();
+        while ($_ptr !== null) {
+            if (isset($varname)) {
+                if (isset($_ptr->config_vars[$varname])) {
+                    return $_ptr->config_vars[$varname];
+                }
+            } else {
+                $var_array = array_merge($_ptr->config_vars, $var_array);
+            }
+             // not found, try at parent
+            if ($search_parents) {
+                $_ptr = $_ptr->parent;
+            } else {
+                $_ptr = null;
+            }
+        }
+        if (isset($varname)) {
+            return '';
+        } else {
+            return $var_array;
+        }
+    }
+
+    /**
+     * Deassigns a single or all config variables
+     *
+     * @param  string               $varname variable name or null
+     * @return Smarty_Internal_Data current Smarty_Internal_Data (or Smarty or Smarty_Internal_Template) instance for chaining
+     */
+    public function clearConfig($varname = null)
+    {
+        if (isset($varname)) {
+            unset($this->config_vars[$varname]);
+        } else {
+            $this->config_vars = array();
+        }
+
+        return $this;
+    }
+
+}
+
+/**
+ * class for the Smarty data object
+ *
+ * The Smarty data object will hold Smarty variables in the current scope
+ *
+ * @package Smarty
+ * @subpackage Template
+ */
+class Smarty_Data extends Smarty_Internal_Data
+{
+    /**
+     * Smarty object
+     *
+     * @var Smarty
+     */
+    public $smarty = null;
+
+    /**
+     * create Smarty data object
+     *
+     * @param Smarty|array $_parent parent template
+     * @param Smarty       $smarty  global smarty instance
+     */
+    public function __construct ($_parent = null, $smarty = null)
+    {
+        $this->smarty = $smarty;
+        if (is_object($_parent)) {
+            // when object set up back pointer
+            $this->parent = $_parent;
+        } elseif (is_array($_parent)) {
+            // set up variable values
+            foreach ($_parent as $_key => $_val) {
+                $this->tpl_vars[$_key] = new Smarty_variable($_val);
+            }
+        } elseif ($_parent != null) {
+            throw new SmartyException("Wrong type for template variables");
+        }
+    }
+
+}
+
+/**
+ * class for the Smarty variable object
+ *
+ * This class defines the Smarty variable object
+ *
+ * @package Smarty
+ * @subpackage Template
+ */
+class Smarty_Variable
+{
+    /**
+     * template variable
+     *
+     * @var mixed
+     */
+    public $value = null;
+    /**
+     * if true any output of this variable will be not cached
+     *
+     * @var boolean
+     */
+    public $nocache = false;
+    /**
+     * the scope the variable will have  (local,parent or root)
+     *
+     * @var int
+     */
+    public $scope = Smarty::SCOPE_LOCAL;
+
+    /**
+     * create Smarty variable object
+     *
+     * @param mixed   $value   the value to assign
+     * @param boolean $nocache if true any output of this variable will be not cached
+     * @param int     $scope   the scope the variable will have  (local,parent or root)
+     */
+    public function __construct($value = null, $nocache = false, $scope = Smarty::SCOPE_LOCAL)
+    {
+        $this->value = $value;
+        $this->nocache = $nocache;
+        $this->scope = $scope;
+    }
+
+    /**
+     * <<magic>> String conversion
+     *
+     * @return string
+     */
+    public function __toString()
+    {
+        return (string) $this->value;
+    }
+
+}
+
+/**
+ * class for undefined variable object
+ *
+ * This class defines an object for undefined variable handling
+ *
+ * @package Smarty
+ * @subpackage Template
+ */
+class Undefined_Smarty_Variable
+{
+    /**
+     * Returns FALSE for 'nocache' and NULL otherwise.
+     *
+     * @param  string $name
+     * @return bool
+     */
+    public function __get($name)
+    {
+        if ($name == 'nocache') {
+            return false;
+        } else {
+            return null;
+        }
+    }
+
+    /**
+     * Always returns an empty string.
+     *
+     * @return string
+     */
+    public function __toString()
+    {
+        return "";
+    }
+
+}

resources/templates/engine/smarty/sysplugins/smarty_internal_debug.php

@@ -0,0 +1,254 @@
+<?php
+/**
+ * Smarty Internal Plugin Debug
+ *
+ * Class to collect data for the Smarty Debugging Consol
+ *
+ * @package Smarty
+ * @subpackage Debug
+ * @author Uwe Tews
+ */
+
+/**
+ * Smarty Internal Plugin Debug Class
+ *
+ * @package Smarty
+ * @subpackage Debug
+ */
+class Smarty_Internal_Debug extends Smarty_Internal_Data
+{
+    /**
+     * template data
+     *
+     * @var array
+     */
+    public static $template_data = array();
+
+    /**
+     * List of uid's which shall be ignored
+     *
+     * @var array
+     */
+    public static $ignore_uid = array();
+
+    /**
+     * Ignore template
+     *
+     * @param object $template
+     */
+    public static function ignore($template)
+    {
+        // calculate Uid if not already done
+        if ($template->source->uid == '') {
+            $template->source->filepath;
+        }
+        self::$ignore_uid[$template->source->uid] = true;
+    }
+
+    /**
+     * Start logging of compile time
+     *
+     * @param object $template
+     */
+    public static function start_compile($template)
+    {
+        static $_is_stringy = array('string' => true, 'eval' => true);
+        if (!empty($template->compiler->trace_uid)) {
+            $key = $template->compiler->trace_uid;
+            if (!isset(self::$template_data[$key])) {
+                if (isset($_is_stringy[$template->source->type])) {
+                    self::$template_data[$key]['name'] = '\'' . substr($template->source->name, 0, 25) . '...\'';
+                } else {
+                    self::$template_data[$key]['name'] = $template->source->filepath;
+                }
+                self::$template_data[$key]['compile_time'] = 0;
+                self::$template_data[$key]['render_time'] = 0;
+                self::$template_data[$key]['cache_time'] = 0;
+            }
+        } else {
+            if (isset(self::$ignore_uid[$template->source->uid])) {
+                return;
+            }
+            $key = self::get_key($template);
+        }
+        self::$template_data[$key]['start_time'] = microtime(true);
+    }
+
+    /**
+     * End logging of compile time
+     *
+     * @param object $template
+     */
+    public static function end_compile($template)
+    {
+        if (!empty($template->compiler->trace_uid)) {
+            $key = $template->compiler->trace_uid;
+        } else {
+            if (isset(self::$ignore_uid[$template->source->uid])) {
+                return;
+            }
+
+            $key = self::get_key($template);
+        }
+        self::$template_data[$key]['compile_time'] += microtime(true) - self::$template_data[$key]['start_time'];
+    }
+
+    /**
+     * Start logging of render time
+     *
+     * @param object $template
+     */
+    public static function start_render($template)
+    {
+        $key = self::get_key($template);
+        self::$template_data[$key]['start_time'] = microtime(true);
+    }
+
+    /**
+     * End logging of compile time
+     *
+     * @param object $template
+     */
+    public static function end_render($template)
+    {
+        $key = self::get_key($template);
+        self::$template_data[$key]['render_time'] += microtime(true) - self::$template_data[$key]['start_time'];
+    }
+
+    /**
+     * Start logging of cache time
+     *
+     * @param object $template cached template
+     */
+    public static function start_cache($template)
+    {
+        $key = self::get_key($template);
+        self::$template_data[$key]['start_time'] = microtime(true);
+    }
+
+    /**
+     * End logging of cache time
+     *
+     * @param object $template cached template
+     */
+    public static function end_cache($template)
+    {
+        $key = self::get_key($template);
+        self::$template_data[$key]['cache_time'] += microtime(true) - self::$template_data[$key]['start_time'];
+    }
+
+    /**
+     * Opens a window for the Smarty Debugging Consol and display the data
+     *
+     * @param Smarty_Internal_Template|Smarty $obj object to debug
+     */
+    public static function display_debug($obj)
+    {
+        // prepare information of assigned variables
+        $ptr = self::get_debug_vars($obj);
+        if ($obj instanceof Smarty) {
+            $smarty = clone $obj;
+        } else {
+            $smarty = clone $obj->smarty;
+        }
+        $_assigned_vars = $ptr->tpl_vars;
+        ksort($_assigned_vars);
+        $_config_vars = $ptr->config_vars;
+        ksort($_config_vars);
+        $smarty->registered_filters = array();
+        $smarty->autoload_filters = array();
+        $smarty->default_modifiers = array();
+        $smarty->force_compile = false;
+        $smarty->left_delimiter = '{';
+        $smarty->right_delimiter = '}';
+        $smarty->debugging = false;
+        $smarty->debugging_ctrl = 'NONE';
+        $smarty->force_compile = false;
+        $_template = new Smarty_Internal_Template($smarty->debug_tpl, $smarty);
+        $_template->caching = false;
+        $_template->disableSecurity();
+        $_template->cache_id = null;
+        $_template->compile_id = null;
+        if ($obj instanceof Smarty_Internal_Template) {
+            $_template->assign('template_name', $obj->source->type . ':' . $obj->source->name);
+        }
+        if ($obj instanceof Smarty) {
+            $_template->assign('template_data', self::$template_data);
+        } else {
+            $_template->assign('template_data', null);
+        }
+        $_template->assign('assigned_vars', $_assigned_vars);
+        $_template->assign('config_vars', $_config_vars);
+        $_template->assign('execution_time', microtime(true) - $smarty->start_time);
+        echo $_template->fetch();
+    }
+
+    /**
+     * Recursively gets variables from all template/data scopes
+     *
+     * @param  Smarty_Internal_Template|Smarty_Data $obj object to debug
+     * @return StdClass
+     */
+    public static function get_debug_vars($obj)
+    {
+        $config_vars = $obj->config_vars;
+        $tpl_vars = array();
+        foreach ($obj->tpl_vars as $key => $var) {
+            $tpl_vars[$key] = clone $var;
+            if ($obj instanceof Smarty_Internal_Template) {
+                $tpl_vars[$key]->scope = $obj->source->type . ':' . $obj->source->name;
+            } elseif ($obj instanceof Smarty_Data) {
+                $tpl_vars[$key]->scope = 'Data object';
+            } else {
+                $tpl_vars[$key]->scope = 'Smarty root';
+            }
+        }
+
+        if (isset($obj->parent)) {
+            $parent = self::get_debug_vars($obj->parent);
+            $tpl_vars = array_merge($parent->tpl_vars, $tpl_vars);
+            $config_vars = array_merge($parent->config_vars, $config_vars);
+        } else {
+            foreach (Smarty::$global_tpl_vars as $name => $var) {
+                if (!array_key_exists($name, $tpl_vars)) {
+                    $clone = clone $var;
+                    $clone->scope = 'Global';
+                    $tpl_vars[$name] = $clone;
+                }
+            }
+        }
+
+        return (object)array('tpl_vars' => $tpl_vars, 'config_vars' => $config_vars);
+    }
+
+    /**
+     * Return key into $template_data for template
+     *
+     * @param  object $template template object
+     * @return string key into $template_data
+     */
+    private static function get_key($template)
+    {
+        static $_is_stringy = array('string' => true, 'eval' => true);
+        // calculate Uid if not already done
+        if ($template->source->uid == '') {
+            $template->source->filepath;
+        }
+        $key = $template->source->uid;
+        if (isset(self::$template_data[$key])) {
+            return $key;
+        } else {
+            if (isset($_is_stringy[$template->source->type])) {
+                self::$template_data[$key]['name'] = '\'' . substr($template->source->name, 0, 25) . '...\'';
+            } else {
+                self::$template_data[$key]['name'] = $template->source->filepath;
+            }
+            self::$template_data[$key]['compile_time'] = 0;
+            self::$template_data[$key]['render_time'] = 0;
+            self::$template_data[$key]['cache_time'] = 0;
+
+            return $key;
+        }
+    }
+
+}

resources/templates/engine/smarty/sysplugins/smarty_internal_filter_handler.php

@@ -0,0 +1,68 @@
+<?php
+/**
+ * Smarty Internal Plugin Filter Handler
+ *
+ * Smarty filter handler class
+ *
+ * @package Smarty
+ * @subpackage PluginsInternal
+ * @author Uwe Tews
+ */
+
+/**
+ * Class for filter processing
+ *
+ * @package Smarty
+ * @subpackage PluginsInternal
+ */
+class Smarty_Internal_Filter_Handler
+{
+    /**
+     * Run filters over content
+     *
+     * The filters will be lazy loaded if required
+     * class name format: Smarty_FilterType_FilterName
+     * plugin filename format: filtertype.filtername.php
+     * Smarty2 filter plugins could be used
+     *
+     * @param  string                   $type     the type of filter ('pre','post','output') which shall run
+     * @param  string                   $content  the content which shall be processed by the filters
+     * @param  Smarty_Internal_Template $template template object
+     * @return string                   the filtered content
+     */
+    public static function runFilter($type, $content, Smarty_Internal_Template $template)
+    {
+        $output = $content;
+        // loop over autoload filters of specified type
+        if (!empty($template->smarty->autoload_filters[$type])) {
+            foreach ((array) $template->smarty->autoload_filters[$type] as $name) {
+                $plugin_name = "Smarty_{$type}filter_{$name}";
+                if ($template->smarty->loadPlugin($plugin_name)) {
+                    if (function_exists($plugin_name)) {
+                        // use loaded Smarty2 style plugin
+                        $output = $plugin_name($output, $template);
+                    } elseif (class_exists($plugin_name, false)) {
+                        // loaded class of filter plugin
+                        $output = call_user_func(array($plugin_name, 'execute'), $output, $template);
+                    }
+                } else {
+                    // nothing found, throw exception
+                    throw new SmartyException("Unable to load filter {$plugin_name}");
+                }
+            }
+        }
+        // loop over registerd filters of specified type
+        if (!empty($template->smarty->registered_filters[$type])) {
+            foreach ($template->smarty->registered_filters[$type] as $key => $name) {
+                if (is_array($template->smarty->registered_filters[$type][$key])) {
+                    $output = call_user_func($template->smarty->registered_filters[$type][$key], $output, $template);
+                } else {
+                    $output = $template->smarty->registered_filters[$type][$key]($output, $template);
+                }
+            }
+        }
+        // return filtered output
+        return $output;
+    }
+
+}

resources/templates/engine/smarty/sysplugins/smarty_internal_function_call_handler.php

@@ -0,0 +1,53 @@
+<?php
+/**
+ * Smarty Internal Plugin Function Call Handler
+ *
+ * @package Smarty
+ * @subpackage PluginsInternal
+ * @author Uwe Tews
+ */
+
+/**
+ * This class does call function defined with the {function} tag
+ *
+ * @package Smarty
+ * @subpackage PluginsInternal
+ */
+class Smarty_Internal_Function_Call_Handler
+{
+    /**
+     * This function handles calls to template functions defined by {function}
+     * It does create a PHP function at the first call
+     *
+     * @param string                   $_name     template function name
+     * @param Smarty_Internal_Template $_template template object
+     * @param array                    $_params   Smarty variables passed as call parameter
+     * @param string                   $_hash     nocache hash value
+     * @param bool                     $_nocache  nocache flag
+     */
+    public static function call($_name, Smarty_Internal_Template $_template, $_params, $_hash, $_nocache)
+    {
+        if ($_nocache) {
+            $_function = "smarty_template_function_{$_name}_nocache";
+        } else {
+            $_function = "smarty_template_function_{$_hash}_{$_name}";
+        }
+        if (!is_callable($_function)) {
+            $_code = "function {$_function}(\$_smarty_tpl,\$params) {
+    \$saved_tpl_vars = \$_smarty_tpl->tpl_vars;
+    foreach (\$_smarty_tpl->smarty->template_functions['{$_name}']['parameter'] as \$key => \$value) {\$_smarty_tpl->tpl_vars[\$key] = new Smarty_variable(\$value);};
+    foreach (\$params as \$key => \$value) {\$_smarty_tpl->tpl_vars[\$key] = new Smarty_variable(\$value);}?>";
+            if ($_nocache) {
+                $_code .= preg_replace(array("!<\?php echo \\'/\*%%SmartyNocache:{$_template->smarty->template_functions[$_name]['nocache_hash']}%%\*/|/\*/%%SmartyNocache:{$_template->smarty->template_functions[$_name]['nocache_hash']}%%\*/\\';\?>!",
+                        "!\\\'!"), array('', "'"), $_template->smarty->template_functions[$_name]['compiled']);
+                $_template->smarty->template_functions[$_name]['called_nocache'] = true;
+            } else {
+                $_code .= preg_replace("/{$_template->smarty->template_functions[$_name]['nocache_hash']}/", $_template->properties['nocache_hash'], $_template->smarty->template_functions[$_name]['compiled']);
+            }
+            $_code .= "<?php \$_smarty_tpl->tpl_vars = \$saved_tpl_vars;}";
+            eval($_code);
+        }
+        $_function($_template, $_params);
+    }
+
+}

resources/templates/engine/smarty/sysplugins/smarty_internal_get_include_path.php

@@ -0,0 +1,46 @@
+<?php
+/**
+ * Smarty read include path plugin
+ *
+ * @package Smarty
+ * @subpackage PluginsInternal
+ * @author Monte Ohrt
+ */
+
+/**
+ * Smarty Internal Read Include Path Class
+ *
+ * @package Smarty
+ * @subpackage PluginsInternal
+ */
+class Smarty_Internal_Get_Include_Path
+{
+    /**
+     * Return full file path from PHP include_path
+     *
+     * @param  string         $filepath filepath
+     * @return string|boolean full filepath or false
+     */
+    public static function getIncludePath($filepath)
+    {
+        static $_include_path = null;
+
+        if (function_exists('stream_resolve_include_path')) {
+            // available since PHP 5.3.2
+            return stream_resolve_include_path($filepath);
+        }
+
+        if ($_include_path === null) {
+            $_include_path = explode(PATH_SEPARATOR, get_include_path());
+        }
+
+        foreach ($_include_path as $_path) {
+            if (file_exists($_path . DS . $filepath)) {
+                return $_path . DS . $filepath;
+            }
+        }
+
+        return false;
+    }
+
+}

resources/templates/engine/smarty/sysplugins/smarty_internal_nocache_insert.php

@@ -0,0 +1,52 @@
+<?php
+/**
+ * Smarty Internal Plugin Nocache Insert
+ *
+ * Compiles the {insert} tag into the cache file
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ * @author Uwe Tews
+ */
+
+/**
+ * Smarty Internal Plugin Compile Insert Class
+ *
+ * @package Smarty
+ * @subpackage Compiler
+ */
+class Smarty_Internal_Nocache_Insert
+{
+    /**
+     * Compiles code for the {insert} tag into cache file
+     *
+     * @param  string                   $_function insert function name
+     * @param  array                    $_attr     array with parameter
+     * @param  Smarty_Internal_Template $_template template object
+     * @param  string                   $_script   script name to load or 'null'
+     * @param  string                   $_assign   optional variable name
+     * @return string                   compiled code
+     */
+    public static function compile($_function, $_attr, $_template, $_script, $_assign = null)
+    {
+        $_output = '<?php ';
+        if ($_script != 'null') {
+            // script which must be included
+            // code for script file loading
+            $_output .= "require_once '{$_script}';";
+        }
+        // call insert
+        if (isset($_assign)) {
+            $_output .= "\$_smarty_tpl->assign('{$_assign}' , {$_function} (" . var_export($_attr, true) . ",\$_smarty_tpl), true);?>";
+        } else {
+            $_output .= "echo {$_function}(" . var_export($_attr, true) . ",\$_smarty_tpl);?>";
+        }
+        $_tpl = $_template;
+        while ($_tpl->parent instanceof Smarty_Internal_Template) {
+            $_tpl = $_tpl->parent;
+        }
+
+        return "/*%%SmartyNocache:{$_tpl->properties['nocache_hash']}%%*/" . $_output . "/*/%%SmartyNocache:{$_tpl->properties['nocache_hash']}%%*/";
+    }
+
+}