netmaker/compose/docker-compose.reference.yml

services:
  netmaker: # The Primary Server for running Netmaker
    privileged: true # Necessary to run sudo/root level commands on host system. Likely using this if running with host networking on.
    container_name: netmaker
    image: gravitl/netmaker:v0.14.3
    volumes: # Volume mounts necessary for CLIENT_MODE to control wireguard networking on host (except dnsconfig, which is where dns config files are stored for use by CoreDNS)
      - dnsconfig:/root/config/dnsconfig # Netmaker writes Corefile to this location, which gets mounted by CoreDNS for DNS configuration.
      - sqldata:/root/data
      - /root/certs:/etc/netmaker/ # cert management location
    cap_add: # Necessary capabilities to set iptables when running in container
      - NET_ADMIN
      - NET_RAW
      - SYS_MODULE
    sysctls:
      - net.ipv4.ip_forward=1
      - net.ipv4.conf.all.src_valid_mark=1
      - net.ipv6.conf.all.disable_ipv6=0
      - net.ipv6.conf.all.forwarding=1
    restart: always
    network_mode: host # Must configure with very particular settngs for host networking to work. Do not just set on!
    environment:
      SERVER_NAME: "" # The domain/host IP indicating the mq broker address
      SERVER_HOST: "" # All the Docker Compose files pre-populate this with HOST_IP, which you replace as part of the install instructions. This will set the HTTP host.
      SERVER_HTTP_HOST: "127.0.0.1" # Overrides SERVER_HOST if set. Useful for making HTTP available via different interfaces/networks.
      API_PORT: 8081 # The HTTP API port for Netmaker. Used for API calls / communication from front end. If changed, need to change port of BACKEND_URL for netmaker-ui.
      CLIENT_MODE: "on" # on if netmaker should run its own client, off if not.
      MASTER_KEY: "secretkey" # The admin master key for accessing the API. Change this in any production installation.
      CORS_ALLOWED_ORIGIN: "*" # The "allowed origin" for API requests. Change to restrict where API requests can come from.
      REST_BACKEND: "on" # Enables the REST backend (API running on API_PORT at SERVER_HTTP_HOST). Change to "off" to turn off.
      DNS_MODE: "on" # Enables DNS Mode, meaning config files will be generated for CoreDNS. Note, turning "off" does not remove CoreDNS. You still need to remove CoreDNS from compose file.
      DISABLE_REMOTE_IP_CHECK: "off" # If turned "on", Server will not set Host based on remote IP check. This is already overridden if SERVER_HOST is set. Turned "off" by default.
      COREDNS_ADDR: "" # Address of the CoreDNS server. Defaults to SERVER_HOST
      DISPLAY_KEYS: "on" # Show keys permanently in UI (until deleted) as opposed to 1-time display.
      SERVER_API_CONN_STRING: "" # Changes the api connection string. IP:PORT format. By default is empty and uses SERVER_HOST:API_PORT
      RCE: "off" # Enables setting PostUp and PostDown (arbitrary commands) on nodes from the server. Off by default.
      NODE_ID: "" # Sets the name/id of the nodes that the server creates. Necessary for HA configurations to identify between servers (for instance, netmaker-1, netmaker-2, etc). For non-HA deployments, is not necessary.
      TELEMETRY: "on" # Whether or not to send telemetry data to help improve Netmaker. Switch to "off" to opt out of sending telemetry.
      MQ_HOST: "mq" # the address of the mq server. If running from docker compose it will be "mq". Otherwise, need to input address. If using "host networking", it will find and detect the IP of the mq container.
      HOST_NETWORK: "off" # whether or not host networking is turned on. Only turn on if configured for host networking (see docker-compose.hostnetwork.yml). Will set host-level settings like iptables.
      MANAGE_IPTABLES: "on" # deprecated
      PORT_FORWARD_SERVICES: "dns" # decide which services to port forward ("dns","ssh", or "mq")
    ports:
      - "51821-51830:51821-51830/udp"
      - "8081:8081"
  netmaker-ui: # The Netmaker UI Component
    container_name: netmaker-ui
    depends_on:
      - netmaker
    image: gravitl/netmaker-ui:v0.14.3
    links:
      - "netmaker:api"
    ports:
      - "8082:80"
    environment:
      BACKEND_URL: "http://HOST_IP:8081" # URL where UI will send API requests. Change based on SERVER_HOST, SERVER_HTTP_HOST, and API_PORT
  restart: always
  coredns: # The DNS Server. Remove this section if DNS_MODE="off"
    depends_on:
      - netmaker 
    image: coredns/coredns
    command: -conf /root/dnsconfig/Corefile
    container_name: coredns
    restart: always
    volumes:
      - dnsconfig:/root/dnsconfig
  caddy:
    image: caddy:latest
    container_name: caddy
    restart: unless-stopped
    network_mode: host # Wants ports 80 and 443!
    volumes:
      - /root/Caddyfile:/etc/caddy/Caddyfile
      # - $PWD/site:/srv # you could also serve a static site in site folder
      - caddy_data:/data
      - caddy_conf:/config  
  mq: # the MQTT broker for netmaker
    image: eclipse-mosquitto:2.0.11-openssl
    container_name: mq
    restart: unless-stopped
    ports:
      - "127.0.0.1:1883:1883"
      - "8883:8883" 
    volumes:
      - /root/mosquitto.conf:/mosquitto/config/mosquitto.conf # need to pull conf file from github before running (under docker/mosquitto.conf)
      - mosquitto_data:/mosquitto/data
      - mosquitto_logs:/mosquitto/log
      - /root/certs/:/mosquitto/certs/
volumes:
  caddy_data: {} # storage for caddy data
  caddy_conf: {} # storage for caddy configuration file
  sqldata: {} # storage for embedded sqlite
  dnsconfig: {} # storage for coredns
  mosquitto_data: {} # storage for mqtt data
  mosquitto_logs: {} # storage for mqtt logs