jMonkeyEngine/sdk/harness/common.xml

<?xml version="1.0" encoding="UTF-8"?>
<!--
DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER.

Copyright 1997-2010 Oracle and/or its affiliates. All rights reserved.

Oracle and Java are registered trademarks of Oracle and/or its affiliates.
Other names may be trademarks of their respective owners.


The contents of this file are subject to the terms of either the GNU
General Public License Version 2 only ("GPL") or the Common
Development and Distribution License("CDDL") (collectively, the
"License"). You may not use this file except in compliance with the
License. You can obtain a copy of the License at
http://www.netbeans.org/cddl-gplv2.html
or nbbuild/licenses/CDDL-GPL-2-CP. See the License for the
specific language governing permissions and limitations under the
License.  When distributing the software, include this License Header
Notice in each file and include the License file at
nbbuild/licenses/CDDL-GPL-2-CP.  Oracle designates this
particular file as subject to the "Classpath" exception as provided
by Oracle in the GPL Version 2 section of the License file that
accompanied this code. If applicable, add the following below the
License Header, with the fields enclosed by brackets [] replaced by
your own identifying information:
"Portions Copyrighted [year] [name of copyright owner]"

Contributor(s):

The Original Software is NetBeans. The Initial Developer of the Original
Software is Sun Microsystems, Inc. Portions Copyright 1997-2006 Sun
Microsystems, Inc. All Rights Reserved.

If you wish your version of this file to be governed by only the CDDL
or only the GPL Version 2, indicate your decision by adding
"[Contributor] elects to include this software in this distribution
under the [CDDL or GPL Version 2] license." If you do not indicate a
single choice of license, a recipient has the option to distribute
your version of this file under either the CDDL, the GPL Version 2 or
to extend the choice of license to its licensees as provided above.
However, if you add GPL Version 2 code and therefore, elected the GPL
Version 2 license, then the option applies only if the new code is
made subject to such option by the copyright holder.
-->
<project name="projectized-common" basedir=".">

    <!-- XXX supply descriptions for the appropriate targets -->
    <!-- XXX should use namespaces for NB in-VM tasks from ant/browsetask and debuggerjpda/ant and apisupport/ant -->
    <!-- XXX move more things here from projectized.xml when possible and desirable -->

    <condition property="testcoverage.import" value="testcoverage.xml">
        <and>
            <isset property="harness.dir"/>
            <available file="testcoverage.xml" filepath="${harness.dir}"/>
        </and>
    </condition>
    <condition property="testcoverage.import" value="${netbeans.dest.dir}/harness/testcoverage.xml">
        <and>
            <isset property="netbeans.dest.dir"/>
            <available file="testcoverage.xml" filepath="${netbeans.dest.dir}/harness"/>
        </and>
    </condition>
    <property name="testcoverage.import" value="no-testcoverage.xml"/>
    <import file="${testcoverage.import}"/>

    <target name="basic-init" depends="common-init,-jdk-init">
        <!-- Synch the following property loads with NbModuleProject.makeEvalDefs: -->
        <property file="nbproject/private/private.properties"/>
        <property file="nbproject/project.properties"/>
        <!-- Do not try to set module.classpath here, in particular: -->
        <!-- during a clean, the ${foo/bar.dir} properties may not be set. -->
        <parseprojectxml project="." 
            codenamebaseproperty="code.name.base"
            codenamebasedashesproperty="code.name.base.dashes" 
            codenamebaseslashesproperty="code.name.base.slashes"
        />
        <property name="module.jar.dir" value="modules"/>
        <property name="module.jar.basename" value="${code.name.base.dashes}.jar"/>
        <property name="module.jar" value="${module.jar.dir}/${module.jar.basename}"/>
        <available property="has.javahelp" file="javahelp" type="dir"/>
        <property name="javahelp.jar.dir" value="modules/docs"/>
        <property name="javahelp.jar.basename" value="${code.name.base.dashes}.jar"/>
        <property name="javahelp.jar" value="${javahelp.jar.dir}/${javahelp.jar.basename}"/>
        <condition property="javahelp.class.path.extension" value="docs/${javahelp.jar.basename}">
            <isset property="has.javahelp"/>
        </condition>
        <property name="javac.source" value="1.4"/>
        <property name="javac.target" value="${javac.source}"/>
        <property name="javac.compilerargs" value=""/>
        <property name="module.auto.deps.xml" location="module-auto-deps.xml"/>
        <condition property="has.module.auto.deps">
            <available file="${module.auto.deps.xml}"/>
        </condition>
        <property name="jar-excludes" value="**/*.java,**/*.form,**/package.html,**/doc-files/"/>
        <property name="module.jar.verifylinkageignores" value=""/>
        <property name="cp.extra" value=""/>
        <tstamp>
            <format property="module.build.started.time" pattern="yyyy-MM-dd'T'HH:mm:ss.SSSZ"/>
        </tstamp>
    </target>

    <target name="-release.dir">
        <property name="release.dir" location="release"/>
        <condition property="has.release.dir">
            <available file="${release.dir}"/>
        </condition>
    </target>
    <target name="-release.files" depends="-release.dir" if="has.release.dir">
        <pathconvert pathsep="," property="release.files">
            <path>
                <fileset dir="${release.dir}"/>
            </path>
            <filtermapper>
                <replacestring from="${release.dir}${file.separator}" to=""/>
                <replacestring from=" " to="?"/>
            </filtermapper>
        </pathconvert>
    </target>
    <target name="files-init" depends="basic-init,-release.files">
        <property name="release.files" value=""/>
        <property name="release.files.extra" value=""/>
        <property name="extra.module.files" value=""/>
        <patternset id="module.files" includes="${release.files},${release.files.extra},${extra.module.files}">
            <include name="${module.jar}"/>
            <include name="${javahelp.jar}" if="has.javahelp"/>
            <include name="config/Modules/${code.name.base.dashes}.xml"/>
            <include name="config/ModuleAutoDeps/${code.name.base.dashes}.xml" if="has.module.auto.deps"/>
            <include name="ant/nblib/${code.name.base.dashes}.jar"/>
        </patternset>
    </target>

    <target name="-javac-init-bootclasspath-prepend" depends="build-init" if="bootclasspath.prepend">
        <presetdef name="nb-javac">
            <custom-javac>
                <bootclasspath>
                    <path path="${nbjdk.bootclasspath}"/>
                </bootclasspath>
                <compilerarg value="-Xbootclasspath/p:${bootclasspath.prepend}" />
            </custom-javac>
        </presetdef>
    </target>

    <target name="-javac-init-no-bootclasspath-prepend" depends="build-init" unless="bootclasspath.prepend">
        <presetdef name="nb-javac">
            <custom-javac>
                <bootclasspath>
                    <path path="${nbjdk.bootclasspath}"/>
                </bootclasspath>
            </custom-javac>
        </presetdef>
    </target>

    <target name="-javac-init" depends="build-init,-javac-init-bootclasspath-prepend,-javac-init-no-bootclasspath-prepend">
        <path id="cp">
            <pathelement path="${module.classpath}"/>
            <pathelement path="${cp.extra}"/>
        </path>
        <path id="processor.cp">
            <pathelement path="${module.run.classpath}"/>
            <pathelement path="${cp.extra}"/>
        </path>
        <!-- Unlike ${module.classpath}, this does not use publicPackageJarDir, since processors need not be in public packages. -->
        <!-- Also needs to include transitive dependencies. -->
    </target>

    <target name="up-to-date" depends="init">
        <uptodate targetfile="${cluster}/${module.jar}" property="is.jar.uptodate">
            <srcfiles dir="${src.dir}"/>
            <srcfiles dir="nbproject">
                <include name="project.xml"/>
                <include name="project.properties"/>
            </srcfiles>
            <srcfiles dir=".">
                <include name="manifest.mf"/>
            </srcfiles>
            <srcresources>
                <path refid="cp"/>
            </srcresources>
        </uptodate>
    </target>

    <target name="update" depends="basic-init">
        <fail
            message="Please specify URL of catalog to perform the update from via -Dautoupdate.catalog.url=..."
            unless="autoupdate.catalog.url"
        />
        <autoupdate
            updatecenter="${autoupdate.catalog.url}"
            todir="${cluster}"
        >
            <modules includes="${code.name.base}"/>
        </autoupdate>
    </target>

    <target name="compile" depends="init,up-to-date" unless="is.jar.uptodate">
        <mkdir dir="${build.classes.dir}"/>
        <depend srcdir="${src.dir}" destdir="${build.classes.dir}" cache="build/depcache">
            <classpath refid="cp"/>
        </depend>
        <nb-javac srcdir="${src.dir}" destdir="${build.classes.dir}" debug="${build.compiler.debug}" debuglevel="${build.compiler.debuglevel}" encoding="UTF-8"
                deprecation="${build.compiler.deprecation}" optimize="${build.compiler.optimize}" source="${javac.source}" target="${javac.target}" includeantruntime="false">
            <classpath refid="cp"/>
            <compilerarg line="${javac.compilerargs}"/>
            <processorpath refid="processor.cp"/>
        </nb-javac>
        <copy todir="${build.classes.dir}">
            <fileset dir="${src.dir}" excludes="${jar-excludes}"/>
        </copy>
    </target>

    <target name="compile-single" depends="init">
        <fail unless="javac.includes">Must select some files in the IDE or set javac.includes</fail>
        <mkdir dir="${build.classes.dir}"/>
        <!-- XXX consider forcing debug=true and deprecation=true -->
        <!-- XXX consider deleting the .class file first to force a rebuild -->
        <depend srcdir="${src.dir}" destdir="${build.classes.dir}" cache="build/depcache">
            <classpath refid="cp"/>
        </depend>
        <nb-javac srcdir="${src.dir}" destdir="${build.classes.dir}"
               debug="${build.compiler.debug}" deprecation="${build.compiler.deprecation}" encoding="UTF-8"
               source="${javac.source}" target="${javac.target}" includes="${javac.includes}" optimize="${build.compiler.optimize}" includeantruntime="false">
            <classpath refid="cp"/>
            <compilerarg line="${javac.compilerargs}"/>
            <processorpath refid="processor.cp"/>
        </nb-javac>
    </target>

    <target name="jar-prep" depends="init">
        <mkdir dir="${cluster}/${module.jar.dir}"/>
        <tstamp>
            <format property="buildnumber" pattern="yyMMdd" timezone="UTC"/>
        </tstamp>
    </target>

    <target name="jar" depends="init,compile,jar-prep" unless="is.jar.uptodate">
        <!-- XXX it seems that using <manifest> forces the JAR to be recreated each time -->
        <!-- (presumably due to the variable OIDE-M-I-V) -->
        <!-- so might have to use e.g. <manifest> task (created in build/ somewhere)? -->
        <!-- Cf: http://issues.apache.org/bugzilla/show_bug.cgi?id=29085 -->
        <!-- This task adds some or all of: -Public-Packages, -Friends, Class-Path, -IDE-Dependencies, -Module-Dependencies, -Specification-Version, -Implementation-Version, -Build-Version, AutoUpdate-Show-In-Client -->
        <jarwithmoduleattributes jarfile="${cluster}/${module.jar}" compress="${build.package.compress}" index="${build.package.index}" manifest="${manifest.mf}" stamp="${cluster}/.lastModified">
            <fileset dir="${build.classes.dir}"/>
        </jarwithmoduleattributes>
    </target>

    <!-- Can insert extra stuff in here: -->
    <target name="netbeans-extra"/>

    <target name="module-xml-regular" if="is.regular">
        <mkdir dir="${cluster}/config/Modules"/>
        <createmodulexml xmldir="${cluster}/config/Modules">
            <enabled dir="${cluster}">
                <include name="${module.jar}"/>
            </enabled>
        </createmodulexml>
    </target>

    <target name="module-xml-autoload" if="is.autoload">
        <mkdir dir="${cluster}/config/Modules"/>
        <createmodulexml xmldir="${cluster}/config/Modules">
            <autoload dir="${cluster}">
                <include name="${module.jar}"/>
            </autoload>
        </createmodulexml>
    </target>

    <target name="module-xml-eager" if="is.eager">
        <mkdir dir="${cluster}/config/Modules"/>
        <createmodulexml xmldir="${cluster}/config/Modules">
            <eager dir="${cluster}">
                <include name="${module.jar}"/>
            </eager>
        </createmodulexml>
    </target>

    <target name="module-auto-deps" depends="basic-init" if="has.module.auto.deps">
        <mkdir dir="${cluster}/config/ModuleAutoDeps"/>
        <copy file="${module.auto.deps.xml}" tofile="${cluster}/config/ModuleAutoDeps/${code.name.base.dashes}.xml"/>
    </target>

    <target name="release" depends="files-init" if="has.release.dir">
        <mkdir dir="${cluster}"/>
        <copy todir="${cluster}" overwrite="true">
            <fileset dir="${release.dir}">
                <patternset includes="${release.files}"/>
            </fileset>
        </copy>        
    </target>

    
    <target name="chmod-executables" depends="-init-executables">
        <chmod perm="a+x">
            <fileset refid="module.executable.files"/>
        </chmod>
    </target>

    <target name="verify-class-linkage" depends="jar,release">
        <verifyclasslinkage jar="${cluster}/${module.jar}" failonerror="false" ignores="${module.jar.verifylinkageignores}" maxwarnings="10">
            <classpath refid="cp"/>
            <classpath path="${nbjdk.bootclasspath}"/>
        </verifyclasslinkage>
    </target>

    <target name="-verify-apichanges"/><!-- just for overriding -->

    <target name="-validate-layers" depends="init">
        <parsemanifest manifest="${manifest.mf}" attribute="OpenIDE-Module-Layer" property="layer.file"/>
        <!-- DTD from sources -->
        <available file="${nb_all}/openide.filesystems/src/org/openide/filesystems/filesystem.dtd" type="file"
            property="dtd.cp" value="${nb_all}/openide.filesystems/src"/>
        <!-- DTD from platform -->
        <pathconvert property="dtd.cp">
            <pathfileset>
                <path refid="cluster.path.id"/>
                <filename name="core/org-openide-filesystems.jar"/>
            </pathfileset>
        </pathconvert>

        <xmlvalidate warn="no"> <!--  failonerror="false" -->
            <fileset file="${src.dir}/${layer.file}"/>
            <xmlcatalog classpath="${dtd.cp}">
                <dtd publicId="-//NetBeans//DTD Filesystem 1.0//EN"
                location="org/openide/filesystems/filesystem.dtd"/>
                <dtd publicId="-//NetBeans//DTD Filesystem 1.1//EN"
                location="org/openide/filesystems/filesystem1_1.dtd"/>
                <dtd publicId="-//NetBeans//DTD Filesystem 1.2//EN"
                location="org/openide/filesystems/filesystem1_2.dtd"/>
            </xmlcatalog>
        </xmlvalidate>
    </target>

    <target name="netbeans" depends="init,jar,netbeans-extra,module-xml-regular,module-xml-autoload,
            module-xml-eager,javahelp,module-auto-deps,release,chmod-executables,verify-class-linkage,
            -validate-layers,-verify-apichanges">
        <property name="module.files.toString" refid="module.files"/>
        <echo level="verbose">Basic matching module files: ${module.files.toString}</echo>
        <genlist outputfiledir="${cluster}" module="${module.jar}">
            <fileset dir="${cluster}">
                <patternset refid="module.files"/>
            </fileset>
        </genlist>
    </target>

    <target name="-jnlp-init">
        <fail unless="jnlp.dest.dir" >
            You have to provide value to jnlp.dest.dir property!
        </fail>
        <mkdir dir="${jnlp.dest.dir}" />
        <makeurl property="jnlp.codebase" file="${jnlp.dest.dir}"/>
        <property name="jnlp.signjar.alias" value="jnlp" />
        <property name="jnlp.signjar.keystore" location="${jnlp.dest.dir}/default.keystore" />
        <property name="jnlp.signjar.password" value="netbeans" />
        <property name="jnlp.permissions" value="&lt;security&gt;&lt;all-permissions/&gt;&lt;/security&gt;"/>
        <property name="jnlp.verify.excludes" value="" />
        <!-- Oddly, <available> as a task overrides existing properties, which is not what we want here. -->
        <condition property="jnlp.sign.jars" value="true">
            <available file="${jnlp.signjar.keystore}"/>
        </condition>
        <property name="jnlp.sign.jars" value="false"/>
        <property name="jnlp.indirect.jars" value="[NOTHING]"/>
        <property name="jnlp.indirect.files" value="[NOTHING]"/>
        <property name="jnlp.generate.versions" value="false"/>
    </target>

    <target name="jnlp" depends="init,netbeans,jnlp-master,-jnlp-init" description="Builds JNLP descriptor and signs JAR files" >
        <makejnlp
            dir="${jnlp.dest.dir}"
            alias="${jnlp.signjar.alias}"
            storepass="${jnlp.signjar.password}"
            keystore="${jnlp.signjar.keystore}"
            codebase="${jnlp.codebase}"
            verify="true"
            verifyexcludes="${jnlp.verify.excludes}"
            permissions="${jnlp.permissions}"
            signjars="${jnlp.sign.jars}"
            processjarversions="${jnlp.generate.versions}"
        >
            <modules dir="${cluster}" >
                <include name="${module.jar}" />
            </modules>
            <indirectjars dir="${cluster}" includes="${jnlp.indirect.jars}"/>
            <indirectfiles dir="${cluster}" includes="${jnlp.indirect.files}"/>
        </makejnlp>
    </target>

    <target name="jnlp-master" depends="init,netbeans" if="jnlp.master.dir" >
        <property name="jnlp.master.codebase" value="" />
        <makemasterjnlp
            dir="${jnlp.master.dir}"
            codebase="${jnlp.master.codebase}"
        >
            <modules dir="${cluster}" >
                <include name="${module.jar}" />
            </modules>
        </makemasterjnlp>
    </target>


    <target name="-nbm-prompt-for-storepass" if="keystore" unless="storepass">
        <input addproperty="storepass" message="Enter password for ${keystore}:"/>
    </target>

    <target name="-init-executables">
        <property name="nbm.executable.files" value="[NOTHING]"/><!-- fallback -->
        <fileset dir="${cluster}" id="module.executable.files" includes="${nbm.executable.files}"/>
    </target>

    <target name="nbm" depends="init,netbeans,-nbm-prompt-for-storepass,-init-executables" description="Build NBM archive.">
        <mkdir dir="build"/>
        <property name="nbm.target.cluster" value=""/> <!-- fallback -->
        <property name="license.file.override" value="${license.file}"/>
        <property name="use.pack200" value="true"/>
        <property name="pack200.excludes" value=""/>
        <makenbm file="build/${nbm}"
                 productdir="${cluster}"
                 module="${module.jar}"
                 homepage="${nbm.homepage}"
                 distribution="${nbm.distribution}"
                 needsrestart="${nbm.needs.restart}"
                 global="${nbm.is.global}"
                 usepack200="${use.pack200}"
                 pack200excludes="${pack200.excludes}"
                 targetcluster="${nbm.target.cluster}"
                 releasedate="${nbm.release.date}"
                 moduleauthor="${nbm.module.author}">
            <license file="${license.file.override}"/>
            <signature keystore="${keystore}" storepass="${storepass}" alias="${nbm_alias}"/>
            <updaterjar>
                <pathfileset>
                    <path refid="cluster.path.id"/>
                    <filename name="modules/ext/updater.jar"/>
                </pathfileset>
            </updaterjar>
            <executables refid="module.executable.files"/>
        </makenbm>
    </target>

    <target name="test-preinit" depends="init"/>
    <target name="test-init" depends="init,test-preinit,test-lib-init">
        <property name="test.timeout" value="600000"/> <!-- 10min per test -->
        <property name="test.run.args" value="-ea"/>
        <property name="test.filter.trace" value="true"/>
        <macrodef name="test-init">
            <attribute name="test.type"/>
            <sequential>
                <property name="test.@{test.type}.dir" location="test/@{test.type}"/>
                <property name="test.@{test.type}.src.dir" location="${test.@{test.type}.dir}/src"/>
                <property name="test.@{test.type}.data.dir" location="${test.@{test.type}.dir}/data"/>
                <property name="build.test.@{test.type}.dir" location="build/test/@{test.type}"/>
                <property name="build.test.@{test.type}.classes.dir" location="${build.test.@{test.type}.dir}/classes"/>
                <property name="build.test.@{test.type}.results.dir" location="${build.test.@{test.type}.dir}/results"/>
                <property name="build.test.@{test.type}.work.dir" location="${build.test.@{test.type}.dir}/work"/>
                <property name="extra.test.libs.dir" location="${test.dist.dir}/extralibs"/>
                <!-- if project.xml doesn't contain test dependencies -->
                <property name="test.@{test.type}.folder" location="build/test/@{test.type}/dist"/>
                <property name="test.@{test.type}.out.folder" location="${test.@{test.type}.folder}"/>
                <property name="test-@{test.type}-sys-prop.cluster.path.final" value="${cluster.path.final}:${cluster}"/> <!-- #153178, 176019 -->
                <property name="test.@{test.type}.cp.extra" value=""/>
                <path id="test.@{test.type}.cp">
                    <!-- Cannot use <path refid="cp"/> since that uses ${module.classpath} and we want ${module.run.classpath}: -->
                    <pathelement path="${test.@{test.type}.compile.cp}"/>
                    <pathelement path="${cp.extra}"/>
                    <pathelement location="${cluster}/${module.jar}"/>
                    <path refid="test.unit.lib.cp"/>
                    <!-- for compatibility with property based classpath-->
                    <pathelement path="${module.run.classpath}"/>
                    <pathelement path="${test.@{test.type}.cp.extra}"/>
                </path>
                <path id="test.@{test.type}.run.cp">
                    <pathelement path="${build.test.@{test.type}.classes.dir}"/>
                    <!-- Cannot use <path refid="cp"/> since that uses ${module.classpath} and we want ${module.run.classpath}: -->
                    <pathelement path="${test.@{test.type}.runtime.cp}"/>
                    <pathelement path="${cp.extra}"/>
                    <pathelement location="${cluster}/${module.jar}"/>
                    <path refid="test.unit.lib.cp"/>
                    <!-- for compatibility with property based classpath-->
                    <pathelement path="${module.run.classpath}"/>
                    <pathelement path="${test.@{test.type}.run.cp.extra}"/>
                    <pathelement path="${test.@{test.type}.cp.extra}"/>
                </path>
                <path id="test.@{test.type}.processor.cp">
                    <path refid="processor.cp"/>
                    <pathelement location="${cluster}/${module.jar}"/>
                    <pathelement path="${test.@{test.type}.runtime.cp}"/>
                    <pathelement path="${test.@{test.type}.cp.extra}"/>
                </path>
                <!-- path reference used in both compiler and executor -->
                <propertyset id="test.@{test.type}.properties">
                    <propertyset>
                        <propertyref prefix="test-@{test.type}-sys-prop."/>
                        <mapper type="glob" from="test-@{test.type}-sys-prop.*" to="*"/>
                    </propertyset>
                    <propertyset>
                        <propertyref name="build.test.@{test.type}.work.dir"/>
                        <mapper type="glob" from="build.test.@{test.type}.work.dir" to="nbjunit.workdir"/>
                    </propertyset>
                </propertyset>
                <condition property="exists.test.@{test.type}.src.dir">
                    <and>
                        <available file="${test.@{test.type}.src.dir}" type="dir"/>
                        <not>
                            <istrue value="${disable.@{test.type}.tests}"/>
                        </not>
                    </and>
                </condition>

            </sequential>
        </macrodef>
        <test-init test.type="unit"/>
        <test-init test.type="qa-functional"/>
    </target>

    <target name="test-build" depends="netbeans,test-dep-build,do-test-build,test-build-datajar" description="Compile and package all tests."/>

    <macrodef name="test-dep-build">
        <attribute name="test.type"/>
        <sequential>
            <sortsuitemodules unsortedmodules="${test.@{test.type}.testdep}" sortedmodulesproperty="mods.sorted" sorttests="true"/>
            <subant buildpath="${mods.sorted}" target="do-test-build" />
        </sequential>
    </macrodef>
    <target name="test-unit-dep-build" if="test.unit.testdep">
        <test-dep-build test.type="unit"/>
    </target>
    <target name="test-qa-functional-dep-build" if="test.qa-functional.testdep">
        <test-dep-build test.type="qa-functional"/>
    </target>
    <target name="test-dep-build" depends="test-unit-dep-build,test-qa-functional-dep-build"/>

    <macrodef name="do-test-build">
        <attribute name="test.type"/>
        <sequential>
            <fail >
             Missing test dependency
              Runtime classpath: ${test.@{test.type}.runtime.cp}
              Compile classpath: ${test.@{test.type}.compile.cp}
                <condition>
                    <or>
                        <contains string="${test.@{test.type}.runtime.cp}" substring="-missing-Module-Entries-:" />
                        <contains string="${test.@{test.type}.compile.cp}" substring="-missing-Module-Entries-:" />
                    </or>
                </condition>
            </fail>
            <mkdir dir="${build.test.@{test.type}.classes.dir}"/>
            <mkdir dir="${test.dist.dir}"/>
            <depend srcdir="${test.@{test.type}.src.dir}" destdir="${build.test.@{test.type}.classes.dir}" cache="${build.test.@{test.type}.dir}/depcache">
                <classpath refid="test.@{test.type}.cp"/>
            </depend>
            <property name="test.excludes" value=""/> <!-- # 113770 -->
            <nb-javac srcdir="${test.@{test.type}.src.dir}" destdir="${build.test.@{test.type}.classes.dir}" excludes="${test.excludes}"
                   debug="true" deprecation="${build.compiler.deprecation}" encoding="UTF-8"
                   source="${javac.source}" target="${javac.target}" optimize="${build.compiler.optimize}" includeantruntime="false">
                <classpath refid="test.@{test.type}.cp"/>
                <compilerarg line="${javac.compilerargs}"/>
                <processorpath refid="test.@{test.type}.processor.cp"/>
            </nb-javac>
            <copy todir="${build.test.@{test.type}.classes.dir}">
                <fileset dir="${test.@{test.type}.src.dir}">
                    <exclude name="**/*.java"/>
                </fileset>
            </copy>
            <delete dir="${build.test.@{test.type}.dir}/data"/>
            <copy todir="${build.test.@{test.type}.dir}">
                <fileset dir="${test.@{test.type}.dir}">
                    <include name="data/**"/>
                </fileset>
            </copy>

            <available file="${test.@{test.type}.data.dir}" type="dir" property="exists.test.@{test.type}.data"/>
            <!-- test distribution -->
            <mkdir dir="${extra.test.libs.dir}"/>
            <mkdir dir="${test.@{test.type}.out.folder}"/>
            <jar destfile="${test.@{test.type}.out.folder}/tests.jar" basedir="${build.test.@{test.type}.classes.dir}" filesetmanifest="merge"/>
            <!-- create properties -->
            <shorterpaths inref="test.@{test.type}.run.cp"
                          out="test.@{test.type}.run.cp.short"
                          extralibs="extra.test.libs.short"
                          extralibsdir="${extra.test.libs.dir}"
                          testproperties="${test.@{test.type}.out.folder}/test.properties">
                <replacement dir="${netbeans.dest.dir}" name="netbeans.dest.dir"/> <!-- for pre-7.0 and NB.org projects -->
                <replacement dir="${test.dist.dir}" name="test.dist.dir"/>
                <!-- XXX this will not be right on Macs: -->
                <replacement dir="${nbjdk.home}/jre" name="java.home"/>
                <replacement dir="${nbjdk.home}" name="java.home.parent"/>
            </shorterpaths>
        </sequential>
    </macrodef>
    <target name="do-unit-test-build" depends="init,test-init" if="exists.test.unit.src.dir">
        <do-test-build test.type="unit"/>
    </target>
    <target name="do-qa-functional-test-build" depends="init,test-init" if="exists.test.qa-functional.src.dir">
        <do-test-build test.type="qa-functional"/>
    </target>
    <target name="do-test-build" depends="do-unit-test-build,do-qa-functional-test-build"/>

    <target name="test-unit-build-datajar" depends="do-test-build" if="exists.test.unit.data">
        <zip destfile="${test.unit.out.folder}/data.zip" basedir="${test.unit.data.dir}"/>
    </target>
    <target name="test-qa-functional-build-datajar" depends="do-test-build" if="exists.test.qa-functional.data">
        <zip destfile="${test.qa-functional.out.folder}/data.zip" basedir="${test.qa-functional.data.dir}"/>
    </target>
    <target name="test-build-datajar" depends="test-unit-build-datajar,test-qa-functional-build-datajar"/>

    <target name="compile-test-single" depends="init,test-init,jar">
        <macrodef name="compile-test-single">
            <attribute name="test.type"/>
            <sequential>
                <fail unless="javac.includes">Must select some files in the IDE or set javac.includes</fail>
                <mkdir dir="${build.test.@{test.type}.classes.dir}"/>
                <!-- XXX consider forcing deprecation=true -->
                <!-- XXX consider deleting the .class file first to force a rebuild -->
                <depend srcdir="${test.@{test.type}.src.dir}" destdir="${build.test.@{test.type}.classes.dir}" cache="${build.test.@{test.type}.dir}/depcache">
                    <classpath refid="test.@{test.type}.cp"/>
                </depend>
                <nb-javac srcdir="${test.@{test.type}.src.dir}" destdir="${build.test.@{test.type}.classes.dir}"
                       debug="true" deprecation="${build.compiler.deprecation}" encoding="UTF-8"
                       source="${javac.source}" target="${javac.target}" includeantruntime="false" optimize="${build.compiler.optimize}" includes="${javac.includes}">
                    <classpath refid="test.@{test.type}.cp"/>
                    <compilerarg line="${javac.compilerargs}"/>
                    <processorpath refid="test.@{test.type}.processor.cp"/>
                </nb-javac>
                <copy todir="${build.test.@{test.type}.classes.dir}">
                    <fileset dir="${test.@{test.type}.src.dir}">
                        <exclude name="**/*.java"/>
                    </fileset>
                </copy>
                <copy todir="${build.test.@{test.type}.dir}">
                    <fileset dir="${test.@{test.type}.dir}">
                        <include name="data/**"/>
                    </fileset>
                </copy>
            </sequential>
        </macrodef>
        <property name="test.type" value="unit"/>
        <compile-test-single test.type="${test.type}"/>
    </target>

    <macrodef name="metaproperty">
        <attribute name="name"/>
        <attribute name="value"/>
        <sequential>
            <property name="@{name}" value="${@{value}}"/>
        </sequential>
    </macrodef>
    <macrodef name="test">
        <attribute name="test.type"/>
        <attribute name="disable.apple.ui" default="false"/>
        <sequential>
            <property name="test.config" value="default"/>
            <property name="test.config.default.includes" value="**/*Test.class"/>
            <property name="test.config.${test.config}.includes" value="NOTHING"/>
            <metaproperty name="test.includes" value="test.config.${test.config}.includes"/>
            <property name="test.config.${test.config}.excludes" value=""/>
            <metaproperty name="test.excludes" value="test.config.${test.config}.excludes"/>
            <mkdir dir="${build.test.@{test.type}.results.dir}"/>
            <junit showoutput="true" fork="true" failureproperty="tests.failed" errorproperty="tests.failed" filtertrace="${test.filter.trace}" tempdir="${build.test.@{test.type}.results.dir}" timeout="${test.timeout}">
                <batchtest todir="${build.test.@{test.type}.results.dir}">
                    <fileset dir="${build.test.@{test.type}.classes.dir}" includes="${test.includes}" excludes="${test.excludes}"/>
                </batchtest>
                <classpath refid="test.@{test.type}.run.cp"/>
                <syspropertyset refid="test.@{test.type}.properties"/>
                <jvmarg value="-Xbootclasspath/p:${bootclasspath.prepend}"/>
                <jvmarg line="${test.run.args}"/>
                <!--needed to have tests NOT to steal focus when running, works in latest apple jdk update only.-->
                <sysproperty key="apple.awt.UIElement" value="@{disable.apple.ui}"/>
                <formatter type="brief" usefile="false"/>
                <formatter type="xml"/>
            </junit>
            <fail message="Some tests failed; see details above.">
                <condition>
                    <and>
                        <isset property="tests.failed"/>
                        <isfalse value="${continue.after.failing.tests}"/>
                    </and>
                </condition>
            </fail>
        </sequential>
    </macrodef>
    <target name="test-unit" depends="init,test-init,test-build" if="exists.test.unit.src.dir">
        <test test.type="unit" disable.apple.ui="true"/>
    </target>
    <target name="test-qa-functional" depends="init,test-init,test-build" if="exists.test.qa-functional.src.dir">
        <test test.type="qa-functional"/>
    </target>

    <target name="test-generate-html">
        <subant target="-test-browse-html" genericantfile="${ant.file}" inheritall="true">
            <dirset dir="build/test" includes="*/results"/>
        </subant>
    </target>

    <target name="-do-test-generate-html">
        <junitreport todir=".">
            <fileset dir=".">
                <include name="TEST-*.xml"/>
            </fileset>
            <report format="frames" todir="html"/>
        </junitreport>
        <makeurl file="${basedir}/html/index.html" property="test.report.url"/>
        <echo>

        Report URL: ${test.report.url}
        </echo>
    </target>

    <target name="-test-browse-html" if="netbeans.home" depends="-do-test-generate-html">
        <nbbrowse file="html/index.html"/>
    </target>
    <target name="test" depends="test-unit,test-qa-functional"/>

    <target name="test-single" depends="init,test-init,test-build">
        <macrodef name="test-single">
            <attribute name="test.type"/>
            <sequential>
                <fail unless="test.includes">Must set test.includes</fail>
                <mkdir dir="${build.test.@{test.type}.results.dir}"/>
                <junit showoutput="true" fork="true" failureproperty="tests.failed" errorproperty="tests.failed" filtertrace="${test.filter.trace}" tempdir="${build.test.@{test.type}.results.dir}" timeout="${test.timeout}">
                    <batchtest todir="${build.test.@{test.type}.results.dir}">
                        <fileset dir="${test.@{test.type}.src.dir}" includes="${test.includes}"/>
                    </batchtest>
                    <classpath refid="test.@{test.type}.run.cp"/>
                    <syspropertyset refid="test.@{test.type}.properties"/>
                    <jvmarg line="${test.run.args}"/>
                    <jvmarg value="-Xbootclasspath/p:${bootclasspath.prepend}"/>
                    <formatter type="brief" usefile="false"/>
                    <formatter type="xml"/>
                </junit>
                <fail if="tests.failed" unless="continue.after.failing.tests">Some tests failed; see details above.</fail>
            </sequential>
        </macrodef>
        <property name="test.type" value="unit"/>
        <test-single test.type="${test.type}"/>
    </target>

    <target name="do-debug-test-single" depends="test-init">
        <macrodef name="do-debug-test-single">
            <attribute name="test.type"/>
            <sequential>
                <fail unless="test.class">Must set test.class</fail>
                <property name="test.report.file" location="${build.test.@{test.type}.results.dir}/TEST-${test.class}.xml"/>
                <delete file="${test.report.file}"/>
                <mkdir dir="${build.test.@{test.type}.results.dir}"/>
                <touch file="${test.report.file}" verbose="false"/>   <!-- must exist, otherwise the XML formatter would fail -->
                <java fork="true" classname="org.apache.tools.ant.taskdefs.optional.junit.JUnitTestRunner">
                    <jvmarg value="-Xdebug"/>
                    <jvmarg value="-Xrunjdwp:transport=dt_socket,address=${jpda.address}"/>
                    <jvmarg line="${test.run.args}"/>
                    <classpath>
                        <path refid="test.@{test.type}.run.cp"/>
                        <pathelement location="${ant.home}/lib/ant.jar"/>
                        <pathelement location="${ant.home}/lib/ant-junit.jar"/>
                    </classpath>
                    <jvmarg value="-Xbootclasspath/p:${bootclasspath.prepend}"/>
                    <syspropertyset refid="test.@{test.type}.properties"/>
                    <arg value="${test.class}"/>
                    <arg value="showoutput=true"/>
                    <arg value="formatter=org.apache.tools.ant.taskdefs.optional.junit.BriefJUnitResultFormatter"/>
                    <arg value="formatter=org.apache.tools.ant.taskdefs.optional.junit.XMLJUnitResultFormatter,${test.report.file}"/>
                </java>
            </sequential>
        </macrodef>
        <property name="test.type" value="unit"/>
        <do-debug-test-single test.type="${test.type}"/>
    </target>

    <target name="debug-test-single" depends="init,test-init,test-build,do-debug-test-single"/>

    <target name="debug-test-single-nb" depends="init,test-init,test-build,-jdk-presetdef-nbjpdastart" if="netbeans.home">
        <macrodef name="debug-test-single-nb">
            <attribute name="test.type"/>
            <sequential>
                <fail unless="test.class">Must set test.class</fail>
                <nbjpdastart transport="dt_socket" addressproperty="jpda.address" name="${test.class}">
                    <classpath>
                        <path refid="test.@{test.type}.run.cp"/>
                        <!-- Permit extra sources to be searched even if they are not in the actual CP. -->
                        <!-- Used e.g. from ant/test/unit since some tests use dynamic loading: -->
                        <pathelement path="${test.@{test.type}.debug.cp.extra}"/>
                    </classpath>
                </nbjpdastart>
                <antcall target="do-debug-test-single"/>
            </sequential>
        </macrodef>
        <property name="test.type" value="unit"/>
        <debug-test-single-nb test.type="${test.type}"/>
    </target>

    <target name="run-test-main"  depends="init,test-init,test-build">
        <macrodef name="tjava">
            <attribute name="test.type"/>
            <element name="customize" optional="true"/>
            <sequential>
                <fail unless="main.class">Must set main.class.</fail>
                <mkdir dir="${build.test.@{test.type}.results.dir}"/>
                <java classname="${main.class}" dir="${build.test.@{test.type}.results.dir}" fork="true">
                    <classpath refid="test.@{test.type}.run.cp"/>
                    <syspropertyset refid="test.@{test.type}.properties"/>
                    <jvmarg line="${test.run.args}"/>
                    <customize/>
                </java>
            </sequential>
        </macrodef>
        <property name="test.type" value="unit"/> <!-- compatibility -->
        <tjava test.type="${test.type}"/>
    </target>

    <target name="do-debug-test-main" depends="test-init">
        <macrodef name="do-debug-test-main">
            <attribute name="test.type"/>
            <element name="customize" optional="true"/>
            <sequential>
                <fail unless="main.class">Must set main.class.</fail>
                <mkdir dir="${build.test.@{test.type}.results.dir}"/>
                <java fork="true" classname="${main.class}">
                    <jvmarg value="-Xdebug"/>
                    <jvmarg value="-Xrunjdwp:transport=dt_socket,address=${jpda.address}"/>
                    <jvmarg line="${test.run.args}"/>
                    <classpath refid="test.@{test.type}.run.cp"/>
                    <syspropertyset refid="test.@{test.type}.properties"/>
                    <customize/>
                </java>
            </sequential>
        </macrodef>
        <property name="test.type" value="unit"/>
        <do-debug-test-main test.type="${test.type}"/>
    </target>

    <target name="debug-test-main-nb" depends="init,test-init,test-build,-jdk-presetdef-nbjpdastart" if="netbeans.home">
        <macrodef name="debug-test-main-nb">
            <attribute name="test.type"/>
            <sequential>
                <fail unless="main.class">Must set main.class</fail>
                <nbjpdastart transport="dt_socket" addressproperty="jpda.address" name="${main.class}">
                    <classpath>
                        <path refid="test.@{test.type}.run.cp"/>
                        <!-- Permit extra sources to be searched even if they are not in the actual CP. -->
                        <!-- Used e.g. from ant/test/unit since some tests use dynamic loading: -->
                        <pathelement path="${test.@{test.type}.debug.cp.extra}"/>
                    </classpath>
                </nbjpdastart>
                <antcall target="do-debug-test-main"/>
            </sequential>
        </macrodef>
        <property name="test.type" value="unit"/>
        <debug-test-main-nb test.type="${test.type}"/>
    </target>
    
    <target name="-pre-debug-fix" depends="init">
        <fail unless="fix.class">Must set fix.class to e.g. org/netbeans/modules/foo/Bar</fail>
        <property name="javac.includes" value="${fix.class}.java"/>
    </target>
    <target name="debug-fix-nb" if="netbeans.home" depends="init,-pre-debug-fix,compile-single">
        <nbjpdareload>
            <fileset includes="${fix.class}*.class" dir="${build.classes.dir}"/>
        </nbjpdareload>
    </target>
    <target name="debug-fix-test-nb" if="netbeans.home" depends="init,-pre-debug-fix,compile-test-single">
        <macrodef name="debug-fix-test-nb">
            <attribute name="test.type"/>
            <sequential>
                <nbjpdareload>
                    <fileset includes="${fix.class}*.class" dir="${build.test.@{test.type}.classes.dir}"/>
                </nbjpdareload>
            </sequential>
        </macrodef>
        <property name="test.type" value="unit"/>
        <debug-fix-test-nb test.type="${test.type}"/>
    </target>

    <target name="profile-test-single-nb" depends="init,test-init,test-build,-jdk-presetdef-nbprofiledirect">
        <macrodef name="profile-test-single-nb">
            <attribute name="test.type"/>
            <sequential>
                <fail unless="profile.class">Must set profile.class</fail>
                <mkdir dir="${build.test.@{test.type}.results.dir}"/>
                <nbprofiledirect
                    jvmargsproperty="profiler.jvmargs"
                    >
                    <classpath refid="test.@{test.type}.run.cp"/>
                </nbprofiledirect>
                <junit showoutput="true" fork="true" failureproperty="tests.failed" errorproperty="tests.failed" filtertrace="${test.filter.trace}" tempdir="${build.test.@{test.type}.results.dir}">
                    <env key="${profiler.info.pathvar}" path="${profiler.info.agentpath}:${profiler.current.path}"/>
                    <jvmarg value="${profiler.info.jvmargs.agent}"/>
                    <jvmarg line="${profiler.info.jvmargs}"/>
                    <test name="${profile.class}" todir="${build.test.@{test.type}.results.dir}"/>
                    <classpath refid="test.@{test.type}.run.cp"/>
                    <jvmarg value="-Xbootclasspath/p:${bootclasspath.prepend}"/>
                    <syspropertyset refid="test.@{test.type}.properties"/>
                    <jvmarg line="${test.run.args}"/>
                    <formatter type="brief" usefile="false"/>
                    <formatter type="xml"/>
                </junit>
                <fail if="tests.failed">Some tests failed; see details above.</fail>
            </sequential>
        </macrodef>
        <property name="test.type" value="unit"/>
        <profile-test-single-nb test.type="${test.type}"/>
    </target>

    <target name="-javadoc-init" depends="init">
        <!-- #71884: default Javadoc title and header -->
        <property file="${manifest.mf}" prefix="mf."/>
        <property file="${src.dir}/${mf.OpenIDE-Module-Localizing-Bundle}" prefix="bundle."/>
        <condition property="javadoc.title" value="${bundle.OpenIDE-Module-Name}">
            <isset property="bundle.OpenIDE-Module-Name"/>
        </condition>
        <property name="javadoc.title" value="${code.name.base.dashes}"/> <!-- fallback -->
        <condition property="mf.OpenIDE-Module-Specification-Version" value="${spec.version.base}"> <!-- fallback -->
            <isset property="spec.version.base"/>
        </condition>
        <property name="mf.OpenIDE-Module" value="${code.name.base.dashes}"/> <!-- fallback -->
        <property name="mf.OpenIDE-Module-Implementation-Version" value=""/> <!-- fallback -->
        <property name="javadoc.header" value="${mf.OpenIDE-Module} ${mf.OpenIDE-Module-Specification-Version} ${mf.OpenIDE-Module-Implementation-Version}"/>
    </target>

    <target name="arch" depends="init" description="Process an arch.xml, creating it if it does not yet exist.">
        <fail unless="javadoc.arch">You must define e.g. javadoc.arch=$${basedir}/arch.xml in project.properties</fail>
        <mkdir dir="build"/>
        <property name="arch.output.html" location="build/arch.html"/>
        <property name="arch.generate" value="true"/>
        <arch answers="${javadoc.arch}" output="${arch.output.html}"
            project="nbproject/project.xml"
        />
    </target>

    <target name="-arch-nb-check"> <!-- #67438: might not yet exist, if arch file newly generated as skeleton -->
        <condition property="-arch-nb-run">
            <and>
                <isset property="netbeans.home"/>
                <available file="${arch.output.html}"/>
            </and>
        </condition>
    </target>
    <target name="arch-nb" depends="init,arch,-arch-nb-check" if="-arch-nb-run" description="Process an arch.xml, creating it if it does not yet exist, and display the result.">
        <nbbrowse file="${arch.output.html}"/>
    </target>

    <target name="-testuserdir-delete-init" depends="files-init">
        <property name="test.user.dir" location="build/testuserdir"/>
        <property name="test.user.dir.lock" location="${test.user.dir}/lock"/>
        <available property="app.running" file="${test.user.dir.lock}"/>
    </target>
    <target name="-testuserdir-delete-ok" depends="-testuserdir-delete-init" unless="app.running">
        <delete dir="${test.user.dir}"/>
    </target>
    <target name="-testuserdir-delete-fail" depends="-testuserdir-delete-init" if="app.running">
        <!-- #66799: best to warn about this condition... -->
        <fail>Will not delete ${test.user.dir} because ${test.user.dir.lock} still exists; kill any running process and delete lock file if necessary</fail>
    </target>
    <target name="testuserdir-delete" depends="-testuserdir-delete-ok,-testuserdir-delete-fail" description="Delete testing user directory (if the application is not running); clears any saved settings etc."/>

    <target name="clean" depends="files-init,testuserdir-delete,test-clean">
        <delete failonerror="false" includeemptydirs="true">
            <fileset dir="${build.classes.dir}" />
            <fileset dir="build">
                <exclude name="testuserdir/"/>
            </fileset>
        </delete>
        <delete dir="${netbeans.javadoc.dir}/${code.name.base.dashes}"/>
        <delete file="${netbeans.javadoc.dir}/${code.name.base.dashes}.zip"/>
        <delete includeemptydirs="true" failonerror="false"> <!-- #59457: OK if cluster does not exist currently -->
            <fileset dir="${cluster}">
                <patternset refid="module.files"/>
            </fileset>
        </delete>
        <delete file="${cluster}/update_tracking/${code.name.base.dashes}.xml"/>
	<delete file="${netbeans.dest.dir}/${module.cluster.name}.built" failonerror="false"/>
    </target>
    <target name="test-clean" depends="basic-init,files-init">
        <macrodef name="test-clean">
            <attribute name="test.type"/>
            <sequential>
                <parseprojectxml project=".">
                    <testtype name="@{test.type}" folder="test.@{test.type}.folder"/>
                </parseprojectxml>
                <property name="test.@{test.type}.out.folder" location="${test.@{test.type}.folder}"/>
                <delete dir="${test.@{test.type}.out.folder}"/>
            </sequential>
        </macrodef>
        <test-clean test.type="unit"/>
        <test-clean test.type="qa-functional"/>
    </target>

    <target name="fix-dependencies" depends="basic-init" description="Removes unused compilation dependencies on other modules.">
        <property name="build.compiler.deprecation" value="false" />
        <fixdependencies antfile="../../build.xml" buildtarget="netbeans" cleantarget="clean" failonerror="true" sanitycheck="false">
            <replace codenamebase="org.openide" addcompiletime="true" >
                <module codenamebase="org.openide.filesystems" spec="6.2"/>
                <module codenamebase="org.openide.util" spec="6.2"/>
                <module codenamebase="org.openide.util.enumerations" spec="6.2"/>
                <module codenamebase="org.openide.modules" spec="6.2"/>
                <module codenamebase="org.openide.nodes" spec="6.2"/>
                <module codenamebase="org.openide.explorer" spec="6.2"/>
                <module codenamebase="org.openide.awt" spec="6.2"/>
                <module codenamebase="org.openide.dialogs" spec="6.2"/>
                <module codenamebase="org.openide.compat" spec="6.2"/>
                <module codenamebase="org.openide.options" spec="6.2"/>
                <module codenamebase="org.openide.windows" spec="6.2"/>
                <module codenamebase="org.openide.text" spec="6.2"/>
                <module codenamebase="org.openide.actions" spec="6.2"/>
                <module codenamebase="org.openide.loaders" spec="5.3"/>
            </replace>
            <replace codenamebase="org.openide.util" addcompiletime="true" >
                <module codenamebase="org.openide.util" spec="8.0"/>
                <module codenamebase="org.openide.util.lookup" spec="8.0"/>
            </replace>

            <fileset dir="nbproject" >
                <include name="project.xml" />
            </fileset>
        </fixdependencies>
    </target>

    <target name="fix-test-dependencies" depends="basic-init" description="Moves classpath for tests from project.properties to project.xml.">
        <fixtestdeps projectXml="nbproject/project.xml"
                  propertiesFile="nbproject/project.properties"/>
    </target>

    <target name="display-coverage-report" depends="coverage-report"
        description="Creates and displays unit test coverage report for this module">
        <fail unless="testcoverage.unit.report.dir">
Property testcoverage.unit.report.dir not set. Test coverage script may be missing in ${harness.dir}.
        </fail>
        <nbbrowse file="${testcoverage.unit.report.dir}/index.html"/>
    </target>
    
</project>