* fixed several ie9999s when illegal operators were used

compiler/msg/errore.msg

@@ -295,7 +295,7 @@ scan_f_include_deep_ten=02062_F_Including include files exceeds a depth of 16.
 % recursion is used.
 scan_e_too_many_push=02063_F_Too many levels of PUSH
 % A maximum of 20 levels is allowed.  This error occur only in mode MacPas.
-scan_e_too_many_pop=02064_E_A POP without a preceding PUSH 
+scan_e_too_many_pop=02064_E_A POP without a preceding PUSH
 % This error occur only in mode MacPas.
 % \end{description}
 #
@@ -1180,7 +1180,7 @@ type_e_operator_not_allowed=04051_E_The operator is not applicable for the opera
 % operands
 type_e_constant_expr_expected=04052_E_Constant Expression expected
 % The compiler expects an constant expression, but gets a variable expression.
-type_e_operator_not_supported_for_types=04053_E_Operation "$1" not supported types "$2" and "$3"
+type_e_operator_not_supported_for_types=04053_E_Operation "$1" not supported for types "$2" and "$3"
 % The operation is not allowed for the supplied types
 type_e_illegal_type_conversion=04054_E_Illegal type conversion: "$1" to "$2"
 % When doing a type-cast, you must take care that the sizes of the variable and

compiler/msgidx.inc

@@ -642,7 +642,7 @@ const
   option_info=11024;
   option_help_pages=11025;
 
-  MsgTxtSize = 36852;
+  MsgTxtSize = 36855;
 
   MsgIdxMax : array[1..20] of longint=(
     17,65,208,59,57,46,99,20,35,60,

compiler/msgtxt.inc

@@ -83,414 +83,413 @@ const msgtxt : array[0..000153,1..240] of char=(
   '02061_E_Constant strings can'#039't be longer than 255 chars'#000+
   '02062_F_Including include files exceeds a depth of 16.'#000+
   '02063_F_Too many levels of PUSH'#000+
-  '02064_E_A POP without a preceding PUSH '#000+
+  '02064_E_A POP without a preceding PUSH'#000+
   '03000_E_Parser - Syntax Error'#000+
-  '03004_E_INT','ERRUPT procedure can'#039't be nested'#000+
+  '03004_E_INTE','RRUPT procedure can'#039't be nested'#000+
   '03005_W_Procedure type "$1" ignored'#000+
   '03006_E_Not all declarations of "$1" are declared with OVERLOAD'#000+
   '03008_E_Duplicate exported function name "$1"'#000+
   '03009_E_Duplicate exported function index $1'#000+
-  '03010_E_Invalid ','index for exported function'#000+
+  '03010_E_Invalid i','ndex for exported function'#000+
   '03011_W_Relocatable DLL or executable $1 debug info does not work, dis'+
   'abled.'#000+
   '03012_W_To allow debugging for win32 code you need to disable relocati'+
   'on with -WN option'#000+
   '03013_E_Constructor name must be INIT'#000+
-  '03014_E_','Destructor name must be DONE'#000+
+  '03014_E_D','estructor name must be DONE'#000+
   '03016_E_Procedure type INLINE not supported'#000+
   '03018_W_Constructor should be public'#000+
   '03019_W_Destructor should be public'#000+
   '03020_N_Class should have one destructor only'#000+
-  '03021_E_Local class definitions are not allowed'#000,
-  '03022_F_Anonym class definitions are not allowed'#000+
+  '03021_E_Local class definitions are not allowed'#000+
+  '0','3022_F_Anonym class definitions are not allowed'#000+
   '03023_N_The object "$1" has no VMT'#000+
   '03024_E_Illegal parameter list'#000+
   '03026_E_Wrong number of parameters specified'#000+
   '03027_E_overloaded identifier "$1" isn'#039't a function'#000+
-  '03028_E_overloaded functions',' have the same parameter list'#000+
+  '03028_E_overloaded functions ','have the same parameter list'#000+
   '03029_E_function header doesn'#039't match the forward declaration "$1"'+
   #000+
   '03030_E_function header "$1" doesn'#039't match forward : var name chan'+
   'ges $2 => $3'#000+
   '03031_N_Values in enumeration types have to be ascending'#000+
-  '03033_E','_With can not be used for variables in a different segment'#000+
+  '03033_E_','With can not be used for variables in a different segment'#000+
   '03034_E_function nesting > 31'#000+
   '03035_E_range check error while evaluating constants'#000+
   '03036_W_range check error while evaluating constants'#000+
   '03037_E_duplicate case label'#000+
-  '03038_E_Upper bo','und of case range is less than lower bound'#000+
+  '03038_E_Upper bou','nd of case range is less than lower bound'#000+
   '03039_E_typed constants of classes are not allowed'#000+
   '03040_E_functions variables of overloaded functions are not allowed'#000+
   '03041_E_string length must be a value from 1 to 255'#000+
-  '03042_W_use extended synta','x of NEW and DISPOSE for instances of obje'+
+  '03042_W_use extended syntax',' of NEW and DISPOSE for instances of obje'+
   'cts'#000+
   '03043_W_use of NEW or DISPOSE for untyped pointers is meaningless'#000+
   '03044_E_use of NEW or DISPOSE is not possible for untyped pointers'#000+
   '03045_E_class identifier expected'#000+
-  '03046_E_type identifier not',' allowed here'#000+
+  '03046_E_type identifier not ','allowed here'#000+
   '03047_E_method identifier expected'#000+
   '03048_E_function header doesn'#039't match any method of this class "$1'+
   '"'#000+
   '03049_DL_procedure/function $1'#000+
   '03050_E_Illegal floating point constant'#000+
   '03051_E_FAIL can be used in constructors only'#000+
-  '03052_','E_Destructors can'#039't have parameters'#000+
+  '03052_E','_Destructors can'#039't have parameters'#000+
   '03053_E_Only class methods can be referred with class references'#000+
   '03054_E_Only class methods can be accessed in class methods'#000+
   '03055_E_Constant and CASE types do not match'#000+
-  '03056_E_The symbol can'#039't be export','ed from a library'#000+
+  '03056_E_The symbol can'#039't be exporte','d from a library'#000+
   '03057_W_An inherited method is hidden by "$1"'#000+
   '03058_E_There is no method in an ancestor class to be overridden: "$1"'+
   #000+
   '03059_E_No member is provided to access property'#000+
-  '03060_W_Stored prorperty directive is not yet implemente','d'#000+
+  '03060_W_Stored prorperty directive is not yet implemented',#000+
   '03061_E_Illegal symbol for property access'#000+
   '03062_E_Cannot access a protected field of an object here'#000+
   '03063_E_Cannot access a private field of an object here'#000+
   '03066_E_overridden methods must have the same return type: "$2" is ove'+
-  'rriden by "','$1" which has another return type'#000+
+  'rriden by "$','1" which has another return type'#000+
   '03067_E_EXPORT declared functions can'#039't be nested'#000+
   '03068_E_methods can'#039't be EXPORTed'#000+
   '03069_E_call by var parameters have to match exactly: Got "$1" expecte'+
   'd "$2"'#000+
-  '03070_E_Class isn'#039't a parent class of the cur','rent class'#000+
+  '03070_E_Class isn'#039't a parent class of the curr','ent class'#000+
   '03071_E_SELF is only allowed in methods'#000+
   '03072_E_methods can be only in other methods called direct with type i'+
   'dentifier of the class'#000+
   '03073_E_Illegal use of '#039':'#039#000+
-  '03074_E_range check error in set constructor or duplicate set element',
-  #000+
+  '03074_E_range check error in set constructor or duplicate set element'#000,
   '03075_E_Pointer to object expected'#000+
   '03076_E_Expression must be constructor call'#000+
   '03077_E_Expression must be destructor call'#000+
   '03078_E_Illegal order of record elements'#000+
   '03079_E_Expression type must be class or record type'#000+
-  '03080_E_Procedures can'#039,'t return a value'#000+
+  '03080_E_Procedures can'#039't',' return a value'#000+
   '03081_E_constructors and destructors must be methods'#000+
   '03082_E_Operator is not overloaded'#000+
   '03083_E_Impossible to overload assignment for equal types'#000+
   '03084_E_Impossible operator overload'#000+
   '03085_E_Re-raise isn'#039't possible there'#000+
-  '03','086_E_The extended syntax of new or dispose isn'#039't allowed for '+
+  '030','86_E_The extended syntax of new or dispose isn'#039't allowed for '+
   'a class'#000+
   '03088_E_Procedure overloading is switched off'#000+
   '03089_E_It is not possible to overload this operator (overload = inste'+
   'ad)'#000+
-  '03090_E_Comparative operator must return a boolean',' value'#000+
+  '03090_E_Comparative operator must return a boolean ','value'#000+
   '03091_E_Only virtual methods can be abstract'#000+
   '03092_F_Use of unsupported feature!'#000+
   '03093_E_The mix of different kind of objects (class, object, interface'+
   ', etc) isn'#039't allowed'#000+
   '03094_W_Unknown procedure directive had to be ignored: "$1"'#000+
-  '0','3095_E_absolute can only be associated to one variable'#000+
+  '03','095_E_absolute can only be associated to one variable'#000+
   '03096_E_absolute can only be associated with a var or const'#000+
   '03097_E_Only one variable can be initialized'#000+
   '03098_E_Abstract methods shouldn'#039't have any definition (with funct'+
   'ion body)'#000+
-  '0309','9_E_This overloaded function can'#039't be local (must be exporte'+
+  '03099','_E_This overloaded function can'#039't be local (must be exporte'+
   'd)'#000+
   '03100_W_Virtual methods are used without a constructor in "$1"'#000+
   '03101_CL_Macro defined: $1'#000+
   '03102_CL_Macro undefined: $1'#000+
   '03103_CL_Macro $1 set to $2'#000+
   '03104_I_Compiling $1'#000+
-  '03105_UL_','Parsing interface of unit $1'#000+
+  '03105_UL_P','arsing interface of unit $1'#000+
   '03106_UL_Parsing implementation of $1'#000+
   '03107_DL_Compiling $1 for the second time'#000+
   '03109_E_No property found to override'#000+
   '03110_E_Only one default property is allowed, found inherited default '+
-  'property in class "$1"'#000,
-  '03111_E_The default property must be an array property'#000+
+  'property in class "$1"'#000+
+  '0','3111_E_The default property must be an array property'#000+
   '03112_E_Virtual constructors are only supported in class object model'#000+
   '03113_E_No default property available'#000+
   '03114_E_The class can'#039't have a published section, use the {$M+} sw'+
   'itch'#000+
-  '03115_','E_Forward declaration of class "$1" must be resolved here to u'+
+  '03115_E','_Forward declaration of class "$1" must be resolved here to u'+
   'se the class as ancestor'#000+
   '03116_E_Local operators not supported'#000+
   '03117_E_Procedure directive "$1" not allowed in interface section'#000+
-  '03118_E_Procedure directive "$1" not allowed in i','mplementation secti'+
+  '03118_E_Procedure directive "$1" not allowed in im','plementation secti'+
   'on'#000+
   '03119_E_Procedure directive "$1" not allowed in procvar declaration'#000+
   '03120_E_Function is already declared Public/Forward "$1"'#000+
   '03121_E_Can'#039't use both EXPORT and EXTERNAL'#000+
-  '03123_W_"$1" not yet supported inside inline proce','dure/function'#000+
+  '03123_W_"$1" not yet supported inside inline proced','ure/function'#000+
   '03124_W_Inlining disabled'#000+
   '03125_I_Writing Browser log $1'#000+
   '03126_H_may be pointer dereference is missing'#000+
   '03127_F_Selected assembler reader not supported'#000+
   '03128_E_Procedure directive "$1" has conflicts with other directives'#000+
-  '03129_','E_Calling convention doesn'#039't match forward'#000+
+  '03129_E','_Calling convention doesn'#039't match forward'#000+
   '03131_E_Property can'#039't have a default value'#000+
   '03132_E_The default value of a property must be constant'#000+
   '03133_E_Symbol can'#039't be published, can be only a class'#000+
-  '03134_E_That kind of property can'#039't be pu','blished'#000+
+  '03134_E_That kind of property can'#039't be pub','lished'#000+
   '03136_W_An import name is required'#000+
   '03138_E_Division by zero'#000+
   '03139_E_Invalid floating point operation'#000+
   '03140_E_Upper bound of range is less than lower bound'#000+
   '03141_W_string "$1" is longer than "$2"'#000+
-  '03142_E_string length is larger than ','array of char length'#000+
+  '03142_E_string length is larger than a','rray of char length'#000+
   '03143_E_Illegal expression after message directive'#000+
   '03144_E_Message handlers can take only one call by ref. parameter'#000+
   '03145_E_Duplicate message label: "$1"'#000+
-  '03146_E_Self can only be an explicit parameter in methods which ','are '+
+  '03146_E_Self can only be an explicit parameter in methods which a','re '+
   'message handlers'#000+
   '03147_E_Threadvars can be only static or global'#000+
   '03148_F_Direct assembler not supported for binary output format'#000+
   '03149_W_Don'#039't load OBJPAS unit manually, use {$mode objfpc} or {$m'+
   'ode delphi} instead'#000+
-  '03150_E_OVERRIDE can'#039,'t be used in objects'#000+
+  '03150_E_OVERRIDE can'#039't',' be used in objects'#000+
   '03151_E_Data types which require initialization/finalization can'#039't'+
   ' be used in variant records'#000+
   '03152_E_Resourcestrings can be only static or global'#000+
   '03153_E_Exit with argument can'#039't be used here'#000+
-  '03154_E_The type of the st','orage symbol must be boolean'#000+
+  '03154_E_The type of the sto','rage symbol must be boolean'#000+
   '03155_E_This symbol isn'#039't allowed as storage symbol'#000+
   '03156_E_Only class which are compiled in $M+ mode can be published'#000+
   '03157_E_Procedure directive expected'#000+
-  '03158_E_The value for a property index must be of an or','dinal type'#000+
+  '03158_E_The value for a property index must be of an ord','inal type'#000+
   '03159_E_Procedure name to short to be exported'#000+
   '03160_E_No DEFFILE entry can be generated for unit global vars'#000+
   '03161_E_Compile without -WD option'#000+
   '03162_F_You need ObjFpc (-S2) or Delphi (-Sd) mode to compile this mod'+
   'ule'#000+
-  '03163_E_Ca','n'#039't export with index under $1'#000+
+  '03163_E_Can',#039't export with index under $1'#000+
   '03164_E_Exporting of variables is not supported under $1'#000+
   '03165_E_Improper GUID syntax'#000+
   '03168_W_Procedure named "$1" not found that is suitable for implementi'+
   'ng the $2.$3'#000+
   '03169_E_interface identifier expected'#000+
-  '03','170_E_Type "$1" can'#039't be used as array index type'#000+
+  '031','70_E_Type "$1" can'#039't be used as array index type'#000+
   '03171_E_Con- and destructors aren'#039't allowed in interfaces'#000+
   '03172_E_Access specifiers can'#039't be used in INTERFACES'#000+
   '03173_E_An interface can'#039't contain fields'#000+
-  '03174_E_Can'#039't declare local procedur','e as EXTERNAL'#000+
+  '03174_E_Can'#039't declare local procedure',' as EXTERNAL'#000+
   '03175_W_Some fields coming before "$1" weren'#039't initialized'#000+
   '03176_E_Some fields coming before "$1" weren'#039't initialized'#000+
   '03177_W_Some fields coming after "$1" weren'#039't initialized'#000+
-  '03178_E_VarArgs directive without CDecl and Extern','al'#000+
+  '03178_E_VarArgs directive without CDecl and Externa','l'#000+
   '03179_E_Self must be a normal (call-by-value) parameter'#000+
   '03180_E_Interface "$1" has no interface identification'#000+
   '03181_E_Unknown class field or method identifier "$1"'#000+
   '03182_W_Overriding calling convention "$1" with "$2"'#000+
-  '03183_E_Typed const','ants of the type "procedure of object" can only b'+
+  '03183_E_Typed consta','nts of the type "procedure of object" can only b'+
   'e initialized with NIL'#000+
   '03184_E_Default value can only be assigned to one parameter'#000+
   '03185_E_Default parameter required for "$1"'#000+
   '03186_W_Use of unsupported feature!'#000+
-  '03187_H_C arrays are passed ','by reference'#000+
+  '03187_H_C arrays are passed b','y reference'#000+
   '03188_E_C array of const must be the last argument'#000+
   '03189_H_Type "$1" redefinition'#000+
   '03190_W_cdecl'#039'ared functions have no high parameter'#000+
   '03191_W_cdecl'#039'ared functions do not support open strings'#000+
-  '03192_E_Cannot initialize variables ','declared as threadvar'#000+
+  '03192_E_Cannot initialize variables d','eclared as threadvar'#000+
   '03193_E_Message directive is only allowed in Classes'#000+
   '03194_E_Procedure or Function expected'#000+
   '03195_W_Calling convention directive ignored: "$1"'#000+
   '03196_E_REINTRODUCE can'#039't be used in objects'#000+
-  '03197_E_Each argument must hav','e it'#039's own location'#000+
+  '03197_E_Each argument must have',' it'#039's own location'#000+
   '03198_E_Each argument must have an explicit location'#000+
   '03199_E_Unknown argument location'#000+
   '03200_E_32 Bit Integer or Pointer Variable expected'#000+
   '03201_E_Goto statements aren'#039't allowed between different procedure'+
   's'#000+
-  '03202_E_Expre','ssion too complicated - FPU stack overflow'#000+
+  '03202_E_Expres','sion too complicated - FPU stack overflow'#000+
   '03203_E_Illegal expression'#000+
   '03204_E_Invalid integer expression'#000+
   '03205_E_Illegal qualifier'#000+
   '03206_E_High range limit < low range limit'#000+
-  '03207_E_Exit'#039's parameter must be the name of the procedure it is u',
-  'sed in'#000+
+  '03207_E_Exit'#039's parameter must be the name of the procedure it is u'+
+  's','ed in'#000+
   '04000_E_Type mismatch'#000+
   '04001_E_Incompatible types: got "$1" expected "$2"'#000+
   '04002_E_Type mismatch between "$1" and "$2"'#000+
   '04003_E_Type identifier expected'#000+
   '04004_E_Variable identifier expected'#000+
-  '04005_E_Integer expression expected, but got "','$1"'#000+
+  '04005_E_Integer expression expected, but got "$','1"'#000+
   '04006_E_Boolean expression expected, but got "$1"'#000+
   '04007_E_Ordinal expression expected'#000+
   '04008_E_pointer type expected, but got "$1"'#000+
   '04009_E_class type expected, but got "$1"'#000+
   '04011_E_Can'#039't evaluate constant expression'#000+
-  '04012_E_Set elements ','are not compatible'#000+
+  '04012_E_Set elements a','re not compatible'#000+
   '04013_E_Operation not implemented for sets'#000+
   '04014_W_Automatic type conversion from floating type to COMP which is '+
   'an integer type'#000+
   '04015_H_use DIV instead to get an integer result'#000+
-  '04016_E_string types doesn'#039't match, because',' of $V+ mode'#000+
+  '04016_E_string types doesn'#039't match, because ','of $V+ mode'#000+
   '04017_E_succ or pred on enums with assignments not possible'#000+
   '04018_E_Can'#039't read or write variables of this type'#000+
   '04019_E_Can'#039't use readln or writeln on typed file'#000+
   '04020_E_Can'#039't use read or write on untyped file.'#000+
-  '04021_E_Type conf','lict between set elements'#000+
+  '04021_E_Type confl','ict between set elements'#000+
   '04022_W_lo/hi(dword/qword) returns the upper/lower word/dword'#000+
   '04023_E_Integer or real expression expected'#000+
   '04024_E_Wrong type "$1" in array constructor'#000+
-  '04025_E_Incompatible type for arg no. $1: Got "$2", expected "$','3"'#000+
+  '04025_E_Incompatible type for arg no. $1: Got "$2", expected "$3','"'#000+
   '04026_E_Method (variable) and Procedure (variable) are not compatible'#000+
   '04027_E_Illegal constant passed to internal math function'#000+
   '04028_E_Can'#039't get the address of constants'#000+
   '04029_E_Argument can'#039't be assigned to'#000+
-  '04030_E_Can'#039't assign local p','rocedure/function to procedure varia'+
+  '04030_E_Can'#039't assign local pr','ocedure/function to procedure varia'+
   'ble'#000+
   '04031_E_Can'#039't assign values to an address'#000+
   '04032_E_Can'#039't assign values to const variable'#000+
   '04033_E_Array type required'#000+
   '04034_E_interface type expected, but got "$1"'#000+
-  '04035_W_Mixing signed expressions and ','longwords gives a 64bit result'+
+  '04035_W_Mixing signed expressions and l','ongwords gives a 64bit result'+
   #000+
   '04036_W_Mixing signed expressions and cardinals here may cause a range'+
   ' check error'#000+
   '04037_E_Typecast has different size ($1 -> $2) in assignment'#000+
   '04038_E_enums with assignments can'#039't be used as array index'#000+
-  '04039','_E_Class or Object types "$1" and "$2" are not related'#000+
+  '04039_','E_Class or Object types "$1" and "$2" are not related'#000+
   '04040_W_Class types "$1" and "$2" are not related'#000+
   '04041_E_Class or interface type expected, but got "$1"'#000+
   '04042_E_Type "$1" is not completely defined'#000+
-  '04043_W_String literal has more char','acters than short string length'#000+
+  '04043_W_String literal has more chara','cters than short string length'#000+
   '04044_W_Comparison is always false due to range of values'#000+
   '04045_W_Comparison is always true due to range of values'#000+
   '04046_W_Constructing a class "$1" with abstract methods'#000+
-  '04047_H_The left operand of the IN op','erator should be byte sized'#000+
+  '04047_H_The left operand of the IN ope','rator should be byte sized'#000+
   '04048_W_Type size mismatch, possible loss of data / range check error'#000+
   '04049_H_Type size mismatch, possible loss of data / range check error'#000+
   '04050_E_The address of an abstract method can'#039't be taken'#000+
-  '04051_E_The ope','rator is not applicable for the operand type'#000+
+  '04051_E_The oper','ator is not applicable for the operand type'#000+
   '04052_E_Constant Expression expected'#000+
-  '04053_E_Operation "$1" not supported types "$2" and "$3"'#000+
+  '04053_E_Operation "$1" not supported for types "$2" and "$3"'#000+
   '04054_E_Illegal type conversion: "$1" to "$2"'#000+
-  '04055_H_Conversion between ordinals and pointers is not',' portable'#000+
+  '04055_H_Conversion between ordinals and pointers is ','not portable'#000+
   '04056_W_Conversion between ordinals and pointers is not portable'#000+
   '04057_E_Can'#039't determine which overloaded function to call'#000+
   '04058_E_Illegal counter variable'#000+
   '05000_E_Identifier not found "$1"'#000+
-  '05001_F_Internal Error in SymTableStack(',')'#000+
+  '05001_F_Internal Error in SymTableSta','ck()'#000+
   '05002_E_Duplicate identifier "$1"'#000+
   '05003_H_Identifier already defined in $1 at line $2'#000+
   '05004_E_Unknown identifier "$1"'#000+
   '05005_E_Forward declaration not solved "$1"'#000+
   '05007_E_Error in type definition'#000+
   '05009_E_Forward type not resolved "$1"'#000+
-  '0501','0_E_Only static variables can be used in static methods or outsi'+
+  '0','5010_E_Only static variables can be used in static methods or outsi'+
   'de methods'#000+
   '05012_F_record or class type expected'#000+
   '05013_E_Instances of classes or objects with an abstract method are no'+
   't allowed'#000+
   '05014_W_Label not defined "$1"'#000+
-  '05015_E_Label us','ed but not defined "$1"'#000+
+  '05015_E_Label',' used but not defined "$1"'#000+
   '05016_E_Illegal label declaration'#000+
   '05017_E_GOTO and LABEL are not supported (use switch -Sg)'#000+
   '05018_E_Label not found'#000+
   '05019_E_identifier isn'#039't a label'#000+
   '05020_E_label already defined'#000+
-  '05021_E_illegal type declaration of s','et elements'#000+
+  '05021_E_illegal type declaration o','f set elements'#000+
   '05022_E_Forward class definition not resolved "$1"'#000+
   '05023_H_Unit "$1" not used in $2'#000+
   '05024_H_Parameter "$1" not used'#000+
   '05025_N_Local variable "$1" not used'#000+
   '05026_H_Value parameter "$1" is assigned but never used'#000+
-  '05027_N_Local varia','ble "$1" is assigned but never used'#000+
+  '05027_N_Local va','riable "$1" is assigned but never used'#000+
   '05028_H_Local $1 "$2" is not used'#000+
   '05029_N_Private field "$1.$2" is never used'#000+
   '05030_N_Private field "$1.$2" is assigned but never used'#000+
   '05031_N_Private method "$1.$2" never used'#000+
-  '05032_E_Set type expected'#000+
-  '0','5033_W_Function result does not seem to be set'#000+
+  '05032_E_Set type expecte','d'#000+
+  '05033_W_Function result does not seem to be set'#000+
   '05034_W_Type "$1" is not aligned correctly in current record for C'#000+
   '05035_E_Unknown record field identifier "$1"'#000+
   '05036_W_Local variable "$1" does not seem to be initialized'#000+
-  '05037_W_Variable "$1"',' does not seem to be initialized'#000+
+  '05037_W_Variable "','$1" does not seem to be initialized'#000+
   '05038_E_identifier idents no member "$1"'#000+
   '05039_H_Found declaration: $1'#000+
   '05040_E_Data element too large'#000+
   '05042_E_No matching implementation for interface method "$1" found'#000+
   '05043_W_Symbol "$1" is deprecated'#000+
-  '0504','4_W_Symbol "$1" is not portable'#000+
+  '0','5044_W_Symbol "$1" is not portable'#000+
   '05055_W_Symbol "$1" is not implemented'#000+
   '05056_E_Can'#039't create unique type from this type'#000+
   '06009_E_Parameter list size exceeds 65535 bytes'#000+
   '06012_E_File types must be var parameters'#000+
-  '06013_E_The use of a far pointe','r isn'#039't allowed there'#000+
+  '06013_E_The use of a far poi','nter isn'#039't allowed there'#000+
   '06015_E_EXPORT declared functions can'#039't be called'#000+
   '06016_W_Possible illegal call of constructor or destructor'#000+
   '06017_N_Inefficient code'#000+
   '06018_W_unreachable code'#000+
   '06020_E_Abstract methods can'#039't be called directly'#000+
-  '06027_DL_','Register $1 weight $2 $3'#000+
+  '06027_','DL_Register $1 weight $2 $3'#000+
   '06029_DL_Stack frame is omitted'#000+
   '06031_E_Object or class methods can'#039't be inline.'#000+
   '06032_E_Procvar calls cannot be inline.'#000+
   '06033_E_No code for inline procedure stored'#000+
-  '06035_E_Element zero of an ansi/wide- or longstrin','g can'#039't be acc'+
+  '06035_E_Element zero of an ansi/wide- or longst','ring can'#039't be acc'+
   'essed, use (set)length instead'#000+
   '06037_E_Constructors or destructors can not be called inside a '#039'wi'+
   'th'#039' clause'#000+
   '06038_E_Cannot call message handler methods directly'#000+
   '06039_E_Jump in or outside of an exception block'#000+
-  '06040_E_Control ','flow statements aren'#039't allowed in a finally bloc'+
+  '06040_E_Contr','ol flow statements aren'#039't allowed in a finally bloc'+
   'k'#000+
   '06041_W_Parameters size exceeds limit for certain cpu'#039's'#000+
   '06042_W_Local variable size exceed limit for certain cpu'#039's'#000+
   '06043_E_Local variables size exceeds supported limit'#000+
-  '06044_E_BREAK not allo','wed'#000+
+  '06044_E_BREAK not a','llowed'#000+
   '06045_E_CONTINUE not allowed'#000+
   '07000_DL_Starting $1 styled assembler parsing'#000+
   '07001_DL_Finished $1 styled assembler parsing'#000+
   '07002_E_Non-label pattern contains @'#000+
   '07004_E_Error building record offset'#000+
-  '07005_E_OFFSET used without identifier'#000+
-  '07','006_E_TYPE used without identifier'#000+
+  '07005_E_OFFSET used without identifier',#000+
+  '07006_E_TYPE used without identifier'#000+
   '07007_E_Cannot use local variable or parameters here'#000+
   '07008_E_need to use OFFSET here'#000+
   '07009_E_need to use $ here'#000+
   '07010_E_Cannot use multiple relocatable symbols'#000+
-  '07011_E_Relocatable symbol can only be added'#000,
+  '07011_E_Relocatable symbol can only be add','ed'#000+
   '07012_E_Invalid constant expression'#000+
   '07013_E_Relocatable symbol is not allowed'#000+
   '07014_E_Invalid reference syntax'#000+
   '07015_E_You can not reach $1 from that code'#000+
   '07016_E_Local symbols/labels aren'#039't allowed as references'#000+
-  '07017_E_Invalid base and in','dex register usage'#000+
+  '07017_E_Invalid base and',' index register usage'#000+
   '07018_W_Possible error in object field handling'#000+
   '07019_E_Wrong scale factor specified'#000+
   '07020_E_Multiple index register usage'#000+
   '07021_E_Invalid operand type'#000+
   '07022_E_Invalid string as opcode operand: $1'#000+
-  '07023_W_@CODE and @DATA ','not supported'#000+
+  '07023_W_@CODE and @DA','TA not supported'#000+
   '07024_E_Null label references are not allowed'#000+
   '07025_E_Divide by zero in asm evaluator'#000+
   '07026_E_Illegal expression'#000+
   '07027_E_escape sequence ignored: $1'#000+
   '07028_E_Invalid symbol reference'#000+
-  '07029_W_Fwait can cause emulation problems w','ith emu387'#000+
+  '07029_W_Fwait can cause emulation problem','s with emu387'#000+
   '07030_W_$1 without operand translated into $1P'#000+
   '07031_W_ENTER instruction is not supported by Linux kernel'#000+
   '07032_W_Calling an overload function in assembler'#000+
   '07033_E_Unsupported symbol type for operand'#000+
-  '07034_E_Constant value out of',' bounds'#000+
+  '07034_E_Constant value out',' of bounds'#000+
   '07035_E_Error converting decimal $1'#000+
   '07036_E_Error converting octal $1'#000+
   '07037_E_Error converting binary $1'#000+
   '07038_E_Error converting hexadecimal $1'#000+
   '07039_H_$1 translated to $2'#000+
   '07040_W_$1 is associated to an overloaded function'#000+
-  '07041_E_','Cannot use SELF outside a method'#000+
+  '07041','_E_Cannot use SELF outside a method'#000+
   '07042_E_Cannot use OLDEBP outside a nested procedure'#000+
   '07043_W_Procedures can'#039't return any value in asm code'#000+
   '07044_E_SEG not supported'#000+
   '07045_E_Size suffix and destination or source size do not match'#000+
-  '07046_W_Si','ze suffix and destination or source size do not match'#000+
+  '07046_W','_Size suffix and destination or source size do not match'#000+
   '07047_E_Assembler syntax error'#000+
   '07048_E_Invalid combination of opcode and operands'#000+
   '07049_E_Assembler syntax error in operand'#000+
   '07050_E_Assembler syntax error in constant'#000+
-  '07051_E_Invalid Str','ing expression'#000+
+  '07051_E_Invalid ','String expression'#000+
   '07052_W_constant with symbol $1 for address which is not on a pointer'#000+
   '07053_E_Unrecognized opcode $1'#000+
   '07054_E_Invalid or missing opcode'#000+
   '07055_E_Invalid combination of prefix and opcode: $1'#000+
-  '07056_E_Invalid combination of overri','de and opcode: $1'#000+
+  '07056_E_Invalid combination of ove','rride and opcode: $1'#000+
   '07057_E_Too many operands on line'#000+
   '07058_W_NEAR ignored'#000+
   '07059_W_FAR ignored'#000+
@@ -498,101 +497,101 @@ const msgtxt : array[0..000153,1..240] of char=(
   '07061_E_Undefined local symbol $1'#000+
   '07062_E_Unknown label identifier $1'#000+
   '07063_E_Invalid register name'#000+
-  '07064_E_Inval','id floating point register name'#000+
+  '07064_E_In','valid floating point register name'#000+
   '07066_W_Modulo not supported'#000+
   '07067_E_Invalid floating point constant $1'#000+
   '07068_E_Invalid floating point expression'#000+
   '07069_E_Wrong symbol type'#000+
   '07070_E_Cannot index a local var or parameter with a register'#000+
-  '07071_','E_Invalid segment override expression'#000+
+  '070','71_E_Invalid segment override expression'#000+
   '07072_W_Identifier $1 supposed external'#000+
   '07073_E_Strings not allowed as constants'#000+
   '07074_No type of variable specified'#000+
   '07075_E_assembler code not returned to text section'#000+
-  '07076_E_Not a directive or local ','symbol $1'#000+
+  '07076_E_Not a directive or loc','al symbol $1'#000+
   '07077_E_Using a defined name as a local label'#000+
   '07078_E_Dollar token is used without an identifier'#000+
   '07079_W_32bit constant created for address'#000+
   '07080_N_.align is target specific, use .balign or .p2align'#000+
-  '07081_E_Can'#039't access fields dir','ectly for parameters'#000+
+  '07081_E_Can'#039't access fields ','directly for parameters'#000+
   '07082_E_Can'#039't access fields of objects/classes directly'#000+
   '07083_E_No size specified and unable to determine the size of the oper'+
   'ands'#000+
   '07084_E_Cannot use RESULT in this function'#000+
-  '07086_W_"$1" without operand translated into ','"$1 %st,%st(1)"'#000+
+  '07086_W_"$1" without operand translated in','to "$1 %st,%st(1)"'#000+
   '07087_W_"$1 %st(n)" translated into "$1 %st,%st(n)"'#000+
   '07088_W_"$1 %st(n)" translated into "$1 %st(n),%st"'#000+
   '07089_E_Char < not allowed here'#000+
   '07090_E_Char > not allowed here'#000+
   '07093_W_ALIGN not supported'#000+
-  '07094_E_Inc and Dec cannot b','e together'#000+
+  '07094_E_Inc and Dec canno','t be together'#000+
   '07095_E_Invalid reglist for movem'#000+
   '07096_E_Reglist invalid for opcode'#000+
   '07097_E_Higher cpu mode required ($1)'#000+
   '07098_W_No size specified and unable to determine the size of the oper'+
   'ands, using DWORD as default'#000+
-  '08000_F_Too many assemb','ler files'#000+
+  '08000_F_Too many ass','embler files'#000+
   '08001_F_Selected assembler output not supported'#000+
   '08002_F_Comp not supported'#000+
   '08003_F_Direct not support for binary writers'#000+
   '08004_E_Allocating of data is only allowed in bss section'#000+
   '08005_F_No binary writer selected'#000+
-  '08006_E_Asm: Opco','de $1 not in table'#000+
+  '08006_E_Asm: O','pcode $1 not in table'#000+
   '08007_E_Asm: $1 invalid combination of opcode and operands'#000+
   '08008_E_Asm: 16 Bit references not supported'#000+
   '08009_E_Asm: Invalid effective address'#000+
   '08010_E_Asm: Immediate or reference expected'#000+
-  '08011_E_Asm: $1 value exceeds bou','nds $2'#000+
+  '08011_E_Asm: $1 value exceeds ','bounds $2'#000+
   '08012_E_Asm: Short jump is out of range $1'#000+
   '08013_E_Asm: Undefined label $1'#000+
   '08014_E_Asm: Comp type not supported for this target'#000+
   '08015_E_Asm: Extended type not supported for this target'#000+
   '08016_E_Asm: Duplicate label $1'#000+
-  '08017_E_Asm: Red','efined label $1'#000+
+  '08017_E_Asm: ','Redefined label $1'#000+
   '08018_E_Asm: First defined here'#000+
   '08019_E_Asm: Invalid register $1'#000+
   '09000_W_Source operating system redefined'#000+
   '09001_I_Assembling (pipe) $1'#000+
   '09002_E_Can'#039't create assember file: $1'#000+
   '09003_E_Can'#039't create object file: $1'#000+
-  '09004_E_Can'#039,'t create archive file: $1'#000+
+  '09004_E_C','an'#039't create archive file: $1'#000+
   '09005_E_Assembler $1 not found, switching to external assembling'#000+
   '09006_T_Using assembler: $1'#000+
   '09007_E_Error while assembling exitcode $1'#000+
   '09008_E_Can'#039't call the assembler, error $1 switching to external a'+
-  'ssembling'#000+
-  '09','009_I_Assembling $1'#000+
+  'ssembling',#000+
+  '09009_I_Assembling $1'#000+
   '09010_I_Assembling with smartlinking $1'#000+
   '09011_W_Object $1 not found, Linking may fail !'#000+
   '09012_W_Library $1 not found, Linking may fail !'#000+
   '09013_E_Error while linking'#000+
-  '09014_E_Can'#039't call the linker, switching to external li','nking'#000+
+  '09014_E_Can'#039't call the linker, switching to external',' linking'#000+
   '09015_I_Linking $1'#000+
   '09016_E_Util $1 not found, switching to external linking'#000+
   '09017_T_Using util $1'#000+
   '09018_E_Creation of Executables not supported'#000+
   '09019_E_Creation of Dynamic/Shared Libraries not supported'#000+
   '09020_I_Closing script $1'#000+
-  '09021','_E_resource compiler not found, switching to external mode'#000+
+  '09','021_E_resource compiler not found, switching to external mode'#000+
   '09022_I_Compiling resource $1'#000+
   '09023_T_unit $1 can'#039't be statically linked, switching to smart lin'+
   'king'#000+
   '09024_T_unit $1 can'#039't be smart linked, switching to static linking'+
   #000+
-  '09025_T_unit ','$1 can'#039't be shared linked, switching to static link'+
+  '09025_T_un','it $1 can'#039't be shared linked, switching to static link'+
   'ing'#000+
   '09026_E_unit $1 can'#039't be smart or static linked'#000+
   '09027_E_unit $1 can'#039't be shared or static linked'#000+
   '09028_F_Can'#039't post process executable $1'#000+
   '09029_F_Can'#039't open executable $1'#000+
-  '09030_X_Size o','f Code: $1 bytes'#000+
+  '09030_X_Siz','e of Code: $1 bytes'#000+
   '09031_X_Size of initialized data: $1 bytes'#000+
   '09032_X_Size of uninitialized data: $1 bytes'#000+
   '09033_X_Stack space reserved: $1 bytes'#000+
   '09034_X_Stack space commited: $1 bytes'#000+
   '10000_T_Unitsearch: $1'#000+
   '10001_T_PPU Loading $1'#000+
-  '10002_U_PPU',' Name: $1'#000+
+  '10002_U_','PPU Name: $1'#000+
   '10003_U_PPU Flags: $1'#000+
   '10004_U_PPU Crc: $1'#000+
   '10005_U_PPU Time: $1'#000+
@@ -600,7 +599,7 @@ const msgtxt : array[0..000153,1..240] of char=(
   '10007_U_PPU Invalid Header (no PPU at the begin)'#000+
   '10008_U_PPU Invalid Version $1'#000+
   '10009_U_PPU is compiled for another processor'#000+
-  '10010_U_PPU is',' compiled for an other target'#000+
+  '10010_U_PPU',' is compiled for an other target'#000+
   '10011_U_PPU Source: $1'#000+
   '10012_U_Writing $1'#000+
   '10013_F_Can'#039't Write PPU-File'#000+
@@ -608,89 +607,89 @@ const msgtxt : array[0..000153,1..240] of char=(
   '10015_F_unexpected end of PPU-File'#000+
   '10016_F_Invalid PPU-File entry: $1'#000+
   '10017_F_PPU Dbx count problem'#000+
-  '10018_E_','Illegal unit name: $1'#000+
+  '10018','_E_Illegal unit name: $1'#000+
   '10019_F_Too much units'#000+
   '10020_F_Circular unit reference between $1 and $2'#000+
   '10021_F_Can'#039't compile unit $1, no sources available'#000+
   '10022_F_Can'#039't find unit $1'#000+
   '10023_W_Unit $1 was not found but $2 exists'#000+
-  '10024_F_Unit $1 search','ed but $2 found'#000+
+  '10024_F_Unit $1 sea','rched but $2 found'#000+
   '10025_W_Compiling the system unit requires the -Us switch'#000+
   '10026_F_There were $1 errors compiling module, stopping'#000+
   '10027_U_Load from $1 ($2) unit $3'#000+
   '10028_U_Recompiling $1, checksum changed for $2'#000+
-  '10029_U_Recompiling $1, sour','ce found only'#000+
+  '10029_U_Recompiling $1, s','ource found only'#000+
   '10030_U_Recompiling unit, static lib is older than ppufile'#000+
   '10031_U_Recompiling unit, shared lib is older than ppufile'#000+
   '10032_U_Recompiling unit, obj and asm are older than ppufile'#000+
-  '10033_U_Recompiling unit, obj is older than asm',#000+
+  '10033_U_Recompiling unit, obj is older than ','asm'#000+
   '10034_U_Parsing interface of $1'#000+
   '10035_U_Parsing implementation of $1'#000+
   '10036_U_Second load for unit $1'#000+
   '10037_U_PPU Check file $1 time $2'#000+
   '10038_H_Conditional $1 was not set at startup in last compilation of $'+
   '2'#000+
-  '10039_H_Conditional $1 was set a','t startup in last compilation of $2'#000+
+  '10039_H_Conditional $1 was se','t at startup in last compilation of $2'#000+
   '10040_W_Can'#039't recompile unit $1, but found modifed include files'#000+
   '10041_H_File $1 is newer than Release PPU file $2'#000+
   '10042_U_Using a unit which was not compiled with correct FPU mode'#000+
-  '10043_U_Loading interfa','ce units from $1'#000+
+  '10043_U_Loading inte','rface units from $1'#000+
   '10044_U_Loading implementation units from $1'#000+
   '10045_U_Interface CRC changed for unit $1'#000+
   '10046_U_Implementation CRC changed for unit $1'#000+
   '10047_U_Finished compiling unit $1'#000+
   '10048_U_Add dependency of $1 to $2'#000+
-  '10049_U_No reload, ','is caller: $1'#000+
+  '10049_U_No reloa','d, is caller: $1'#000+
   '10050_U_No reload, already in second compile: $1'#000+
   '10051_U_Flag for reload: $1'#000+
   '10052_U_Forced reloading'#000+
   '10053_U_Previous state of $1: $2'#000+
   '10054_U_Already compiling $1, setting second compile'#000+
   '10055_U_Loading unit $1'#000+
-  '10056_U_Finish','ed loading unit $1'#000+
+  '10056_U_Fin','ished loading unit $1'#000+
   '10057_U_Registering new unit $1'#000+
   '10058_U_Re-resolving unit $1'#000+
   '10059_U_Skipping re-resolving unit $1, still loading used units'#000+
   '11000_$1 [options] <inputfile> [options]'#000+
   '11001_W_Only one source file supported'#000+
-  '11002_W_DEF file',' can be created only for OS/2'#000+
+  '11002_W_DEF f','ile can be created only for OS/2'#000+
   '11003_E_nested response files are not supported'#000+
   '11004_F_No source file name in command line'#000+
   '11005_N_No option inside $1 config file'#000+
   '11006_E_Illegal parameter: $1'#000+
   '11007_H_-? writes help pages'#000+
-  '11008_F_Too many co','nfig files nested'#000+
+  '11008_F_Too many',' config files nested'#000+
   '11009_F_Unable to open file $1'#000+
   '11010_D_Reading further options from $1'#000+
   '11011_W_Target is already set to: $1'#000+
   '11012_W_Shared libs not supported on DOS platform, reverting to static'+
   #000+
   '11013_F_too many IF(N)DEFs'#000+
-  '11014_F_too many',' ENDIFs'#000+
+  '11014_F_too m','any ENDIFs'#000+
   '11015_F_open conditional at the end of the file'#000+
   '11016_W_Debug information generation is not supported by this executab'+
   'le'#000+
   '11017_H_Try recompiling with -dGDB'#000+
   '11018_E_You are using the obsolete switch $1'#000+
-  '11019_E_You are using the obsol','ete switch $1, please use $2'#000+
+  '11019_E_You are using the ob','solete switch $1, please use $2'#000+
   '11020_N_Switching assembler to default source writing assembler'#000+
   '11021_W_Assembler output selected "$1" is not compatible with "$2"'#000+
   '11022_W_"$1" assembler use forced'#000+
   '11026_T_Reading options from file $1'#000+
-  '11027_T_R','eading options from environment $1'#000+
+  '11027_','T_Reading options from environment $1'#000+
   '11028_D_Handling option "$1"'#000+
   '11029__*** press enter ***'#000+
   '11030_H_Start of reading config file $1'#000+
   '11031_H_End of reading config file $1'#000+
   '11032_D_interpreting option "$1"'#000+
-  '11036_D_interpreting firstpass option ','"$1"'#000+
+  '11036_D_interpreting firstpass opti','on "$1"'#000+
   '11033_D_interpreting file option "$1"'#000+
   '11034_D_Reading config file "$1"'#000+
   '11035_D_found source file name "$1"'#000+
   '11037_D_Defining symbol $1'#000+
   '11038_D_Undefining symbol $1'#000+
   '11039_E_Unknown code page'#000+
-  '11023_Free Pascal Compiler version $FPCVER [$F','PCDATE] for $FPCTARGET'+
+  '11023_Free Pascal Compiler version $FPCVER ','[$FPCDATE] for $FPCTARGET'+
   #010+
   'Copyright (c) 1993-2004 by Florian Klaempfl'#000+
   '11024_Free Pascal Compiler version $FPCVER'#010+
@@ -701,33 +700,33 @@ const msgtxt : array[0..000153,1..240] of char=(
   'Supported targets:'#010+
   '  $OSTARGETS'#010+
   #010+
-  'This program comes under the GNU General ','Public Licence'#010+
+  'This program comes under the GNU Gener','al Public Licence'#010+
   'For more information read COPYING.FPC'#010+
   #010+
   'Report bugs,suggestions etc to:'#010+
   '                 [email protected]'#000+
   '11025_**0*_put + after a boolean switch option to enable it, - to disa'+
   'ble it'#010+
-  '**1a_the compiler doesn'#039't delete the g','enerated assembler file'#010+
+  '**1a_the compiler doesn'#039't delete th','e generated assembler file'#010+
   '**2al_list sourcecode lines in assembler file'#010+
   '**2ar_list register allocation/release info in assembler file'#010+
   '**2at_list temp allocation/release info in assembler file'#010+
   '**1b_generate browser info'#010+
-  '**2bl_generate local sy','mbol info'#010+
+  '**2bl_generate local',' symbol info'#010+
   '**1B_build all modules'#010+
   '**1C<x>_code generation options:'#010+
   '**2CD_create also dynamic library (not supported)'#010+
   '**2Ce_Compilation with emulated floating point opcodes'#010+
   '**2Cf_Select fpu instruction set to use'#010+
   '**2Cg_Generate PIC code'#010+
-  '**2Ch','<n>_<n> bytes heap (between 1023 and 67107840)'#010+
+  '**','2Ch<n>_<n> bytes heap (between 1023 and 67107840)'#010+
   '**2Ci_IO-checking'#010+
   '**2Cn_omit linking stage'#010+
   '**2Co_check overflow of integer operations'#010+
   '**2Cr_range checking'#010+
   '**2CR_verify object method call validity'#010+
   '**2Cs<n>_set stack size to <n>'#010+
-  '**2Ct_stack ch','ecking'#010+
+  '**2Ct_stack',' checking'#010+
   '**2CX_create also smartlinked library'#010+
   '**1d<x>_defines the symbol <x>'#010+
   '*O1D_generate a DEF file'#010+
@@ -736,12 +735,12 @@ const msgtxt : array[0..000153,1..240] of char=(
   '**1e<x>_set path to executable'#010+
   '**1E_same as -Cn'#010+
   '**1F<x>_set file names and paths:'#010+
-  '**2F','D<x>_sets the directory where to search for compiler utilities'#010+
+  '*','*2FD<x>_sets the directory where to search for compiler utilities'#010+
   '**2Fe<x>_redirect error output to <x>'#010+
   '**2FE<x>_set exe/unit output path to <x>'#010+
   '**2Fi<x>_adds <x> to include path'#010+
   '**2Fl<x>_adds <x> to library path'#010+
-  '*L2FL<x>_uses <x> as dynamic l','inker'#010+
+  '*L2FL<x>_uses <x> as dynami','c linker'#010+
   '**2Fo<x>_adds <x> to object path'#010+
   '**2Fr<x>_load error message file <x>'#010+
   '**2Fu<x>_adds <x> to unit path'#010+
@@ -749,13 +748,13 @@ const msgtxt : array[0..000153,1..240] of char=(
   '*g1g_generate debugger information:'#010+
   '*g2gg_use gsym'#010+
   '*g2gd_use dbx'#010+
-  '*g2gh_use heap t','race unit (for memory leak debugging)'#010+
+  '*g2gh_use hea','p trace unit (for memory leak debugging)'#010+
   '*g2gl_use line info unit to show more info for backtraces'#010+
   '*g2gc_generate checks for pointers'#010+
   '*g2gv_generates programs tracable with valygrind'#010+
   '*g2gw_generate dwarf debugging info'#010+
   '**1i_information'#010+
-  '**2iD_r','eturn compiler date'#010+
+  '**2i','D_return compiler date'#010+
   '**2iV_return compiler version'#010+
   '**2iSO_return compiler OS'#010+
   '**2iSP_return compiler processor'#010+
@@ -763,24 +762,24 @@ const msgtxt : array[0..000153,1..240] of char=(
   '**2iTP_return target processor'#010+
   '**1I<x>_adds <x> to include path'#010+
   '**1k<x>_Pass <x> to the linker'#010+
-  '**1l_write l','ogo'#010+
+  '**1l_writ','e logo'#010+
   '**1M<x>_set language mode to <x>'#010+
   '**2Mfpc_free pascal dialect (default)'#010+
   '**2Mobjfpc_switch some Delphi 2 extensions on'#010+
   '**2Mdelphi_tries to be Delphi compatible'#010+
   '**2Mtp_tries to be TP/BP 7.0 compatible'#010+
-  '**2Mgpc_tries to be gpc compatible'#010+
-  '**2','Mmacpas_tries to be compatible to the macintosh pascal dialects'#010+
+  '**2Mgpc_tries to be gpc compatible'#010,
+  '**2Mmacpas_tries to be compatible to the macintosh pascal dialects'#010+
   '**1n_don'#039't read the default config file'#010+
   '**1o<x>_change the name of the executable produced to <x>'#010+
   '**1pg_generate profile code for gprof (defines FPC_PROFILE)'#010+
-  '*L1P_use pipes ins','tead of creating temporary assembler files'#010+
+  '*L1P_use pipes ','instead of creating temporary assembler files'#010+
   '**1S<x>_syntax options:'#010+
   '**2S2_same as -Mobjfpc'#010+
   '**2Sc_supports operators like C (*=,+=,/= and -=)'#010+
   '**2Sa_include assertion code.'#010+
   '**2Sd_same as -Mdelphi'#010+
-  '**2Se<x>_compiler stops after the <x> errors (d','efault is 1)'#010+
+  '**2Se<x>_compiler stops after the <x> errors',' (default is 1)'#010+
   '**2Sg_allow LABEL and GOTO'#010+
   '**2Sh_Use ansistrings'#010+
   '**2Si_support C++ styled INLINE'#010+
@@ -788,67 +787,67 @@ const msgtxt : array[0..000153,1..240] of char=(
   '**2So_same as -Mtp'#010+
   '**2Sp_same as -Mgpc'#010+
   '**2Ss_constructor name must be init (destructor must be done)'#010+
-  '**2St_al','low static keyword in objects'#010+
+  '**2St','_allow static keyword in objects'#010+
   '**1s_don'#039't call assembler and linker'#010+
   '**2sh_Generate script to link on host'#010+
   '**2st_Generate script to link on target'#010+
   '**2sr_Skip register allocation phase (optimizations will be disabled)'#010+
-  '**1u<x>_undefines the sym','bol <x>'#010+
+  '**1u<x>_undefines the ','symbol <x>'#010+
   '**1U_unit options:'#010+
   '**2Un_don'#039't check the unit name'#010+
   '**2Ur_generate release unit files'#010+
   '**2Us_compile a system unit'#010+
   '**1v<x>_Be verbose. <x> is a combination of the following letters:'#010+
-  '**2*_e : Show errors (default)       d : Show debug ','info'#010+
+  '**2*_e : Show errors (default)       d : Show deb','ug info'#010+
   '**2*_w : Show warnings               u : Show unit info'#010+
   '**2*_n : Show notes                  t : Show tried/used files'#010+
   '**2*_h : Show hints                  m : Show defined macros'#010+
-  '**2*_i : Show general info           p : Show compiled ','procedures'#010+
+  '**2*_i : Show general info           p : Show compil','ed procedures'#010+
   '**2*_l : Show linenumbers            c : Show conditionals'#010+
   '**2*_a : Show everything             0 : Show nothing (except errors)'#010+
   '**2*_b : Show all procedure          r : Rhide/GCC compatibility mode'#010+
-  '**2*_    declarations if an er','ror    x : Executable info (Win32 only'+
+  '**2*_    declarations if an',' error    x : Executable info (Win32 only'+
   ')'#010+
   '**2*_    occurs'#010+
   '**1V_write fpcdebug.txt file with lots of debugging info'#010+
   '**1X_executable options:'#010+
   '*L2Xc_link with the c library'#010+
   '**2Xs_strip all symbols from executable'#010+
-  '**2XD_try to link dynamic       ','   (defines FPC_LINK_DYNAMIC)'#010+
+  '**2XD_try to link dynamic    ','      (defines FPC_LINK_DYNAMIC)'#010+
   '**2XP<x>_prepend the binutils names with the prefix <x>'#010+
   '**2XS_try to link static (default) (defines FPC_LINK_STATIC)'#010+
   '**2XX_try to link smart            (defines FPC_LINK_SMART)'#010+
-  '**0*_Processor specific options:'#010,
+  '**0*_Processor specific option','s:'#010+
   '3*1A<x>_output format:'#010+
   '3*2Aas_assemble using GNU AS'#010+
   '3*2Anasmcoff_coff (Go32v2) file using Nasm'#010+
   '3*2Anasmelf_elf32 (Linux) file using Nasm'#010+
   '3*2Awasm_obj file using Wasm (Watcom)'#010+
   '3*2Anasmobj_obj file using Nasm'#010+
-  '3*2Amasm_obj file using Masm (Mic','rosoft)'#010+
+  '3*2Amasm_obj file using Masm (','Microsoft)'#010+
   '3*2Atasm_obj file using Tasm (Borland)'#010+
   '3*2Acoff_coff (Go32v2) using internal writer'#010+
   '3*2Apecoff_pecoff (Win32) using internal writer'#010+
   '3*1R<x>_assembler reading style:'#010+
   '3*2Ratt_read AT&T style assembler'#010+
-  '3*2Rintel_read Intel style assemb','ler'#010+
+  '3*2Rintel_read Intel style ass','embler'#010+
   '3*2Rdirect_copy assembler text directly to assembler file'#010+
   '3*1O<x>_optimizations:'#010+
   '3*2Og_generate smaller code'#010+
   '3*2OG_generate faster code (default)'#010+
   '3*2Or_keep certain variables in registers'#010+
-  '3*2Ou_enable uncertain optimizations (see docs)'#010,
+  '3*2Ou_enable uncertain optimizations (see doc','s)'#010+
   '3*2O1_level 1 optimizations (quick optimizations)'#010+
   '3*2O2_level 2 optimizations (-O1 + slower optimizations)'#010+
   '3*2O3_level 3 optimizations (-O2 repeatedly, max 5 times)'#010+
   '3*2Op<x>_target processor:'#010+
   '3*3Op1_set target processor to 386/486'#010+
-  '3*3Op2_se','t target processor to Pentium/PentiumMMX (tm)'#010+
+  '3*3Op2','_set target processor to Pentium/PentiumMMX (tm)'#010+
   '3*3Op3_set target processor to PPro/PII/c6x86/K6 (tm)'#010+
   '3*1T<x>_Target operating system:'#010+
   '3*2Temx_OS/2 via EMX (including EMX/RSX extender)'#010+
   '3*2Tgo32v2_Version 2 of DJ Delorie DOS extender'#010+
-  '3*2Tlinux','_Linux'#010+
+  '3*2Tli','nux_Linux'#010+
   '3*2Tnetware_Novell Netware Module (clib)'#010+
   '3*2Tos2_OS/2 / eComStation'#010+
   '3*2Tsunos_SunOS/Solaris'#010+
@@ -856,26 +855,26 @@ const msgtxt : array[0..000153,1..240] of char=(
   '3*2Twdosx_WDOSX DOS extender'#010+
   '3*2Twin32_Windows 32 Bit'#010+
   '3*1W<x>_Win32-like target options'#010+
-  '3*2WB<x>_Se','t Image base to Hexadecimal <x> value'#010+
+  '3*2WB<x>','_Set Image base to Hexadecimal <x> value'#010+
   '3*2WC_Specify console type application'#010+
   '3*2WD_Use DEFFILE to export functions of DLL or EXE'#010+
   '3*2WF_Specify full-screen type application (OS/2 only)'#010+
   '3*2WG_Specify graphic type application'#010+
-  '3*2WN_Do not gene','rate relocation code (necessary for debugging)'#010+
+  '3*2WN_Do not g','enerate relocation code (necessary for debugging)'#010+
   '3*2WR_Generate relocation code'#010+
   '6*1A<x>_output format'#010+
   '6*2Aas_Unix o-file using GNU AS'#010+
   '6*2Agas_GNU Motorola assembler'#010+
   '6*2Amit_MIT Syntax (old GAS)'#010+
   '6*2Amot_Standard Motorola assembler'#010+
-  '6*1O_optimiz','ations:'#010+
+  '6*1O_opti','mizations:'#010+
   '6*2Oa_turn on the optimizer'#010+
   '6*2Og_generate smaller code'#010+
   '6*2OG_generate faster code (default)'#010+
   '6*2Ox_optimize maximum (still BUGGY!!!)'#010+
   '6*2O0_set target processor to a MC68000'#010+
   '6*2O2_set target processor to a MC68020+ (default)'#010+
-  '6*1R<x>_','assembler reading style:'#010+
+  '6*1R<','x>_assembler reading style:'#010+
   '6*2RMOT_read motorola style assembler'#010+
   '6*1T<x>_Target operating system:'#010+
   '6*2Tamiga_Commodore Amiga'#010+
@@ -883,13 +882,13 @@ const msgtxt : array[0..000153,1..240] of char=(
   '6*2Tlinux_Linux-68k'#010+
   '6*2Tmacos_Macintosh m68k (not supported)'#010+
   '6*2Tpalmos_PalmOS'#010+
-  'P*1T<x>_Targe','t operating system:'#010+
+  'P*1T<x>_Ta','rget operating system:'#010+
   'P*2Tdarwin_Darwin and MacOS X on PowerPC'#010+
   'P*2Tlinux_Linux on PowerPC'#010+
   'P*2Tmacos_MacOS (classic) on PowerPC'#010+
   'P*2Tmorphos_MorphOS'#010+
   'P*2WC_Specify console type application (MacOS only)'#010+
-  'P*2WG_Specify graphic type application (Mac','OS only)'#010+
+  'P*2WG_Specify graphic type application (','MacOS only)'#010+
   'P*2WT_Specify tool type application (MPW tool, MacOS only)'#010+
   '**1*_'#010+
   '**1?_shows this help'#010+

compiler/nadd.pas

@@ -527,6 +527,11 @@ implementation
                    t:=cordconstnode.create(byte(compareansistrings(s1,s2,l1,l2)=0),booltype,true);
                  unequaln :
                    t:=cordconstnode.create(byte(compareansistrings(s1,s2,l1,l2)<>0),booltype,true);
+                 else
+                   begin
+                     CGMessage3(type_e_operator_not_supported_for_types,node2opstr(nodetype),ld.typename,rd.typename);
+                     t:=cnothingnode.create;
+                   end;
               end;
               result:=t;
               exit;
@@ -594,6 +599,11 @@ implementation
                      b:=tsetconstnode(left).value_set^ >= tsetconstnode(right).value_set^;
                      t:=cordconstnode.create(byte(b),booltype,true);
                    end;
+                 else
+                   begin
+                     CGMessage3(type_e_operator_not_supported_for_types,node2opstr(nodetype),ld.typename,rd.typename);
+                     t:=cnothingnode.create;
+                   end;
               end;
               result:=t;
               exit;
@@ -718,7 +728,11 @@ implementation
                        end;
                     end;
                   else
-                    CGMessage3(type_e_operator_not_supported_for_types,node2opstr(nodetype),ld.typename,rd.typename);
+                    begin
+                      CGMessage3(type_e_operator_not_supported_for_types,node2opstr(nodetype),ld.typename,rd.typename);
+                      result:=cnothingnode.create;
+                      exit;
+                    end;
                 end;
               end
              { Both are chars? }
@@ -2010,7 +2024,10 @@ begin
 end.
 {
   $Log$
-  Revision 1.125  2004-06-20 08:55:29  florian
+  Revision 1.126  2004-08-08 15:22:29  florian
+    * fixed several ie9999s when illegal operators were used
+
+  Revision 1.125  2004/06/20 08:55:29  florian
     * logs truncated
 
   Revision 1.124  2004/06/16 20:07:07  florian