+ sym_n_unit_not_used

compiler/errore.msg

@@ -1041,6 +1041,8 @@ sym_e_ill_type_decl_set=E_illegal type declaration of set elements
 % The declaration of a set contains an invalid type definition.
 sym_e_class_forward_not_resolved=E_Forward class definition not resolved $1
 % You declared a class, but you didn't implement it.
+sym_n_unit_not_used=H_Unit $1 not used in $2
+% The unit referenced in the \var{uses} clause is not used.
 sym_h_para_identifier_not_used=H_Parameter $1 not used
 % This is a warning. The identifier was declared (locally or globally) but
 % wasn't used (locally or globally).

compiler/msgidx.inc

@@ -280,6 +280,7 @@ type tmsgconst=(
   sym_e_label_already_defined,
   sym_e_ill_type_decl_set,
   sym_e_class_forward_not_resolved,
+  sym_n_unit_not_used,
   sym_h_para_identifier_not_used,
   sym_n_local_identifier_not_used,
   sym_h_para_identifier_only_set,

compiler/msgtxt.inc

@@ -298,123 +298,124 @@ const msgtxt : array[0..000110,1..240] of char=(
   'E_label already defined'#000+
   'E_illegal type declaration of set elements'#000+
   'E_Forward class definitio','n not resolved $1'#000+
+  'H_Unit $1 not used in $2'#000+
   'H_Parameter $1 not used'#000+
   'N_Local variable $1 not used'#000+
   'H_Value parameter $1 is assigned but never used'#000+
   'N_Local variable $1 is assigned but never used'#000+
   'H_Local $1 $2 is not used'#000+
-  'N_Private field $1.$2 is never used'#000+
-  'N_Private fi','eld $1.$2 is assigned but never used'#000+
+  'N_Private field $1.$2 i','s never used'#000+
+  'N_Private field $1.$2 is assigned but never used'#000+
   'N_Private method $1.$2 never used'#000+
   'E_Set type expected'#000+
   'W_Function result does not seem to be set'#000+
   'E_Unknown record field identifier $1'#000+
-  'W_Local variable $1 does not seem to be initialized'#000+
-  'W_Variable $1 does',' not seem to be initialized'#000+
+  'W_Local variable $1 does not seem to be initi','alized'#000+
+  'W_Variable $1 does not seem to be initialized'#000+
   'E_identifier idents no member $1'#000+
   'B_Found declaration: $1'#000+
   'E_Data segment too large (max. 2GB)'#000+
   'E_BREAK not allowed'#000+
   'E_CONTINUE not allowed'#000+
   'E_Expression too complicated - FPU stack overflow'#000+
-  'E_Illegal expression'#000+
-  'E_Inv','alid integer expression'#000+
+  'E','_Illegal expression'#000+
+  'E_Invalid integer expression'#000+
   'E_Illegal qualifier'#000+
   'E_High range limit < low range limit'#000+
   'E_Illegal counter variable'#000+
   'E_Can'#039't determine which overloaded function to call'#000+
   'E_Parameter list size exceeds 65535 bytes'#000+
-  'E_Illegal type conversion'#000+
-  'D_Conversion',' between ordinals and pointers is not portable across pl'+
-  'atforms'#000+
+  'E_Illegal typ','e conversion'#000+
+  'D_Conversion between ordinals and pointers is not portable across plat'+
+  'forms'#000+
   'E_File types must be var parameters'#000+
   'E_The use of a far pointer isn'#039't allowed there'#000+
   'E_illegal call by reference parameters'#000+
-  'E_EXPORT declared functions can'#039't be called'#000+
-  'W_Possible',' illegal call of constructor or destructor (doesn'#039't ma'+
-  'tch to this context)'#000+
+  'E_EXPORT declared functions c','an'#039't be called'#000+
+  'W_Possible illegal call of constructor or destructor (doesn'#039't matc'+
+  'h to this context)'#000+
   'N_Inefficient code'#000+
   'W_unreachable code'#000+
   'E_procedure call with stackframe ESP/SP'#000+
   'E_Abstract methods can'#039't be called directly'#000+
-  'F_Internal Error in getfloatreg(), allocati','on failure'#000+
+  'F_Internal Error i','n getfloatreg(), allocation failure'#000+
   'F_Unknown float type'#000+
   'F_SecondVecn() base defined twice'#000+
   'F_Extended cg68k not supported'#000+
   'F_32-bit unsigned not supported in MC68000 mode'#000+
   'F_Internal Error in secondinline()'#000+
   'D_Register $1 weight $2 $3'#000+
-  'E_Stack limit excedeed in local r','outine'#000+
+  'E_Stack ','limit excedeed in local routine'#000+
   'D_Stack frame is omitted'#000+
   'W_Range check for 64 bit integers is not supported on this target'#000+
   'E_Object or class methods can'#039't be inline.'#000+
   'E_Procvar calls can'#039't be inline.'#000+
   'E_No code for inline procedure stored'#000+
-  'E_Direct call of interrupt p','rocedure $1 is not possible'#000+
+  'E_D','irect call of interrupt procedure $1 is not possible'#000+
   'E_Element zero of an ansi/wide- or longstring can'#039't be accessed, u'+
   'se (set)length instead'#000+
   'E_Include and exclude not implemented in this case'#000+
-  'E_Constructors or destructors can not be called inside a '#039'with'#039+
+  'E_Constructors or destructors can not be called',' inside a '#039'with'#039+
   ' clause'#000+
-  'E','_Cannot call message handler method directly'#000+
+  'E_Cannot call message handler method directly'#000+
   'E_Jump in or outside of an exception block'#000+
   'E_Control flow statements aren'#039't allowed in a finally block'#000+
   'D_Starting $1 styled assembler parsing'#000+
-  'D_Finished $1 styled assembler parsing'#000+
-  'E_Non-label pa','ttern contains @'#000+
+  'D_Finished $1 styled assembl','er parsing'#000+
+  'E_Non-label pattern contains @'#000+
   'W_Override operator not supported'#000+
   'E_Error building record offset'#000+
   'E_OFFSET used without identifier'#000+
   'E_TYPE used without identifier'#000+
   'E_Cannot use local variable or parameters here'#000+
-  'E_need to use OFFSET here'#000+
-  'E_Cannot use multiple',' relocatable symbols'#000+
+  'E_need to use OFFSET h','ere'#000+
+  'E_Cannot use multiple relocatable symbols'#000+
   'E_Relocatable symbol can only be added'#000+
   'E_Invalid constant expression'#000+
   'E_Relocatable symbol is not allowed'#000+
   'E_Invalid reference syntax'#000+
   'E_You can not reach $1 from that code'#000+
-  'E_Local symbols/labels aren'#039't allowed as referenc','es'#000+
+  'E_Local symbols/labels a','ren'#039't allowed as references'#000+
   'E_Invalid base and index register usage'#000+
   'W_Possible error in object field handling'#000+
   'E_Wrong scale factor specified'#000+
   'E_Multiple index register usage'#000+
   'E_Invalid operand type'#000+
   'E_Invalid string as opcode operand: $1'#000+
-  'W_@CODE and @DATA not supporte','d'#000+
+  'W_@CO','DE and @DATA not supported'#000+
   'E_Null label references are not allowed'#000+
   'F_Divide by zero in asm evaluator'#000+
   'F_Evaluator stack overflow'#000+
   'F_Evaluator stack underflow'#000+
   'F_Invalid numeric format in asm evaluator'#000+
   'F_Invalid Operator in asm evaluator'#000+
-  'E_escape sequence ignored: $1'#000+
-  'E','_Invalid symbol reference'#000+
+  'E_esca','pe sequence ignored: $1'#000+
+  'E_Invalid symbol reference'#000+
   'W_Fwait can cause emulation problems with emu387'#000+
   'W_Calling an overload function in assembler'#000+
   'E_Unsupported symbol type for operand'#000+
   'E_Constant value out of bounds'#000+
-  'E_Error converting decimal $1'#000+
-  'E_Error converting oct','al $1'#000+
+  'E_Error converting decimal ','$1'#000+
+  'E_Error converting octal $1'#000+
   'E_Error converting binary $1'#000+
   'E_Error converting hexadecimal $1'#000+
   'H_$1 translated to $2'#000+
   'W_$1 is associated to an overloaded function'#000+
   'E_Cannot use SELF outside a method'#000+
-  'E_Cannot use OLDEBP outside a nested procedure'#000+
-  'W_Procedures can'#039't ret','urn any value in asm code'#000+
+  'E_Cannot use OLDEBP outside a nested procedu','re'#000+
+  'W_Procedures can'#039't return any value in asm code'#000+
   'E_SEG not supported'#000+
   'E_Size suffix and destination or source size do not match'#000+
   'W_Size suffix and destination or source size do not match'#000+
   'E_Assembler syntax error'#000+
-  'E_Invalid combination of opcode and operands'#000+
-  'E_Asseml','er syntax error in operand'#000+
+  'E_Invalid combination of opc','ode and operands'#000+
+  'E_Assemler syntax error in operand'#000+
   'E_Assemler syntax error in constant'#000+
   'E_Invalid String expression'#000+
   '32bit constant created for address'#000+
   'E_Invalid or missing opcode'#000+
   'E_Invalid combination of prefix and opcode: $1'#000+
-  'E_Invalid combination of override and o','pcode: $1'#000+
+  'E_Invalid comb','ination of override and opcode: $1'#000+
   'E_Too many operands on line'#000+
   'W_NEAR ignored'#000+
   'W_FAR ignored'#000+
@@ -423,68 +424,68 @@ const msgtxt : array[0..000110,1..240] of char=(
   'E_Unknown label identifier $1'#000+
   'E_Invalid floating point register name'#000+
   'E_NOR not supported'#000+
-  'W_Modulo not supported'#000+
-  'E_Inv','alid floating point constant $1'#000+
+  'W_M','odulo not supported'#000+
+  'E_Invalid floating point constant $1'#000+
   'E_Invalid floating point expression'#000+
   'E_Wrong symbol type'#000+
   'E_Cannot index a local var or parameter with a register'#000+
   'E_Invalid segment override expression'#000+
-  'W_Identifier $1 supposed external'#000+
-  'E_Strings not allowed as',' constants'#000+
+  'W_Identifier $1 supposed external',#000+
+  'E_Strings not allowed as constants'#000+
   'No type of variable specified'#000+
   'E_assembler code not returned to text section'#000+
   'E_Not a directive or local symbol $1'#000+
   'E_Using a defined name as a local label'#000+
   'E_Dollar token is used without an identifier'#000+
-  'W_32bit constant created for ad','dress'#000+
+  'W_32bi','t constant created for address'#000+
   'N_.align is target specific, use .balign or .p2align'#000+
   'E_Can'#039't access fields directly for parameters'#000+
   'E_Can'#039't access fields of objects/classes directly'#000+
   'F_Too many assembler files'#000+
-  'F_Selected assembler output not supported'#000+
-  'F_Comp not suppo','rted'#000+
+  'F_Selected assembler output not s','upported'#000+
+  'F_Comp not supported'#000+
   'F_Direct not support for binary writers'#000+
   'E_Allocating of data is only allowed in bss section'#000+
   'F_No binary writer selected'#000+
   'E_Asm: Opcode $1 not in table'#000+
   'E_Asm: $1 invalid combination of opcode and operands'#000+
-  'E_Asm: 16 Bit references not sup','ported'#000+
+  'E_Asm: ','16 Bit references not supported'#000+
   'E_Asm: Invalid effective address'#000+
   'E_Asm: Immediate or reference expected'#000+
   'E_Asm: $1 value exceeds bounds $2'#000+
   'E_Asm: Short jump is out of range $1'#000+
   'E_Asm: Undefined label $1'#000+
   'W_Source operating system redefined'#000+
-  'I_Assembling (pipe) $1'#000+
-  'E_Can',#039't create assember file: $1'#000+
+  'I_A','ssembling (pipe) $1'#000+
+  'E_Can'#039't create assember file: $1'#000+
   'E_Can'#039't create object file: $1'#000+
   'E_Can'#039't create archive file: $1'#000+
   'W_Assembler $1 not found, switching to external assembling'#000+
   'T_Using assembler: $1'#000+
   'W_Error while assembling exitcode $1'#000+
-  'W_Can'#039't call the assembler, err','or $1 switching to external assem'+
-  'bling'#000+
+  'W_Can'#039,'t call the assembler, error $1 switching to external assemb'+
+  'ling'#000+
   'I_Assembling $1'#000+
   'I_Assembling smartlink $1'#000+
   'W_Object $1 not found, Linking may fail !'#000+
   'W_Library $1 not found, Linking may fail !'#000+
   'W_Error while linking'#000+
-  'W_Can'#039't call the linker, switching to external linki','ng'#000+
+  'W_Can'#039't call the linker, sw','itching to external linking'#000+
   'I_Linking $1'#000+
   'W_Util $1 not found, switching to external linking'#000+
   'T_Using util $1'#000+
   'E_Creation of Executables not supported'#000+
   'E_Creation of Dynamic/Shared Libraries not supported'#000+
   'I_Closing script $1'#000+
-  'W_resource compiler not found, switching to ','external mode'#000+
+  'W_resource compiler',' not found, switching to external mode'#000+
   'I_Compiling resource $1'#000+
   'F_Can'#039't post process executable $1'#000+
   'F_Can'#039't open executable $1'#000+
   'X_Size of Code: $1 bytes'#000+
   'X_Size of initialized data: $1 bytes'#000+
   'X_Size of uninitialized data: $1 bytes'#000+
-  'X_Stack space reserved: $1 bytes'#000+
-  'X_Stac','k space commited: $1 bytes'#000+
+  'X_Stack space ','reserved: $1 bytes'#000+
+  'X_Stack space commited: $1 bytes'#000+
   'T_Unitsearch: $1'#000+
   'T_PPU Loading $1'#000+
   'U_PPU Name: $1'#000+
@@ -494,7 +495,7 @@ const msgtxt : array[0..000110,1..240] of char=(
   'U_PPU File too short'#000+
   'U_PPU Invalid Header (no PPU at the begin)'#000+
   'U_PPU Invalid Version $1'#000+
-  'U_PPU is compiled for an other',' processor'#000+
+  'U_PPU',' is compiled for an other processor'#000+
   'U_PPU is compiled for an other target'#000+
   'U_PPU Source: $1'#000+
   'U_Writing $1'#000+
@@ -503,101 +504,101 @@ const msgtxt : array[0..000110,1..240] of char=(
   'F_unexpected end of PPU-File'#000+
   'F_Invalid PPU-File entry: $1'#000+
   'F_PPU Dbx count problem'#000+
-  'E_Illegal unit name: $1'#000+
-  'F_Too m','uch units'#000+
+  'E_Ille','gal unit name: $1'#000+
+  'F_Too much units'#000+
   'F_Circular unit reference between $1 and $2'#000+
   'F_Can'#039't compile unit $1, no sources available'#000+
   'F_Can'#039't find unit $1'#000+
   'W_Unit $1 was not found but $2 exists'#000+
   'F_Unit $1 searched but $2 found'#000+
-  'W_Compiling the system unit requires the -Us swit','ch'#000+
+  'W_Compiling the system u','nit requires the -Us switch'#000+
   'F_There were $1 errors compiling module, stopping'#000+
   'U_Load from $1 ($2) unit $3'#000+
   'U_Recompiling $1, checksum changed for $2'#000+
   'U_Recompiling $1, source found only'#000+
   'U_Recompiling unit, static lib is older than ppufile'#000+
-  'U_Recompiling unit, shared l','ib is older than ppufile'#000+
+  'U_R','ecompiling unit, shared lib is older than ppufile'#000+
   'U_Recompiling unit, obj and asm are older than ppufile'#000+
   'U_Recompiling unit, obj is older than asm'#000+
   'U_Parsing interface of $1'#000+
   'U_Parsing implementation of $1'#000+
   'U_Second load for unit $1'#000+
-  'U_PPU Check file $1 time $2'#000+
-  '$1 [opt','ions] <inputfile> [options]'#000+
+  'U_PPU Chec','k file $1 time $2'#000+
+  '$1 [options] <inputfile> [options]'#000+
   'W_Only one source file supported'#000+
   'W_DEF file can be created only for OS/2'#000+
   'E_nested response files are not supported'#000+
   'F_No source file name in command line'#000+
-  'N_No option inside $1 config file'#000+
+  'N_No option inside $1 config file'#000,
   'E_Illegal parameter: $1'#000+
-  'H','_-? writes help pages'#000+
+  'H_-? writes help pages'#000+
   'F_Too many config files nested'#000+
   'F_Unable to open file $1'#000+
   'N_Reading further options from $1'#000+
   'W_Target is already set to: $1'#000+
   'W_Shared libs not supported on DOS platform, reverting to static'#000+
-  'F_too many IF(N)DEFs'#000+
-  'F_too many ','ENDIFs'#000+
+  'F_too m','any IF(N)DEFs'#000+
+  'F_too many ENDIFs'#000+
   'F_open conditional at the end of the file'#000+
   'W_Debug information generation is not supported by this executable'#000+
   'H_Try recompiling with -dGDB'#000+
   'E_You are using the obsolete switch $1'#000+
-  'E_You are using the obsolete switch $1, please use $2'#000+
-  'N_','Switching assembler to default source writing assembler'#000+
+  'E_You are using the obsolete sw','itch $1, please use $2'#000+
+  'N_Switching assembler to default source writing assembler'#000+
   'Free Pascal Compiler version $FPCVER [$FPCDATE] for $FPCTARGET'#000+
   'Copyright (c) 1993-2000 by Florian Klaempfl'#000+
   'Free Pascal Compiler version $FPCVER'#000+
   #000+
-  'Compiler Date  : $FPCDATE'#000+
-  'Compiler Targ','et: $FPCTARGET'#000+
+  'Compiler Date ',' : $FPCDATE'#000+
+  'Compiler Target: $FPCTARGET'#000+
   #000+
   'This program comes under the GNU General Public Licence'#000+
   'For more information read COPYING.FPC'#000+
   #000+
   'Report bugs,suggestions etc to:'#000+
   '                 [email protected]'#000+
-  '**0*_put + after a boolean switch option to enable it, - t','o disable '+
+  '**0*_put + after a boolean switch',' option to enable it, - to disable '+
   'it'#000+
   '**1a_the compiler doesn'#039't delete the generated assembler file'#000+
   '**2al_list sourcecode lines in assembler file'#000+
   '**2ar_list register allocation/release info in assembler file'#000+
-  '**2at_list temp allocation/release info in assembler file',#000+
+  '**2at_list temp allocation/relea','se info in assembler file'#000+
   '**1b_generate browser info'#000+
   '**2bl_generate local symbol info'#000+
   '**1B_build all modules'#000+
   '**1C<x>_code generation options:'#000+
   '**2CD_create also dynamic library (not supported)'#000+
-  '**2Ch<n>_<n> bytes heap (between 1023 and 67107840)'#000+
+  '**2Ch<n>_<n> bytes heap (between 1023 and 671078','40)'#000+
   '**2Ci_IO-checking'#000+
-  '**2','Cn_omit linking stage'#000+
+  '**2Cn_omit linking stage'#000+
   '**2Co_check overflow of integer operations'#000+
   '**2Cr_range checking'#000+
   '**2Cs<n>_set stack size to <n>'#000+
   '**2Ct_stack checking'#000+
   '**2CX_create also smartlinked library'#000+
   '**1d<x>_defines the symbol <x>'#000+
-  '*O1D_generate a DEF file'#000+
-  '*O2Dd<x>','_set description to <x>'#000+
+  '*O1D_gen','erate a DEF file'#000+
+  '*O2Dd<x>_set description to <x>'#000+
   '*O2Dw_PM application'#000+
   '**1e<x>_set path to executable'#000+
   '**1E_same as -Cn'#000+
   '**1F<x>_set file names and paths:'#000+
   '**2FD<x>_sets the directory where to search for compiler utilities'#000+
-  '**2Fe<x>_redirect error output to <x>'#000+
-  '**2FE<x>','_set exe/unit output path to <x>'#000+
+  '**2Fe<x>_redirect err','or output to <x>'#000+
+  '**2FE<x>_set exe/unit output path to <x>'#000+
   '**2Fi<x>_adds <x> to include path'#000+
   '**2Fl<x>_adds <x> to library path'#000+
   '*L2FL<x>_uses <x> as dynamic linker'#000+
   '**2Fo<x>_adds <x> to object path'#000+
   '**2Fr<x>_load error message file <x>'#000+
-  '**2Fu<x>_adds <x> to unit path'#000+
-  '**','2FU<x>_set unit output path to <x>, overrides -FE'#000+
+  '**2Fu<x>','_adds <x> to unit path'#000+
+  '**2FU<x>_set unit output path to <x>, overrides -FE'#000+
   '*g1g_generate debugger information:'#000+
   '*g2gg_use gsym'#000+
   '*g2gd_use dbx'#000+
   '*g2gh_use heap trace unit (for memory leak debugging)'#000+
-  '*g2gl_use line info unit to show more info for backtraces'#000+
-  '*g2gc_generat','e checks for pointers'#000+
+  '*g2gl_use line info unit to show more info for',' backtraces'#000+
+  '*g2gc_generate checks for pointers'#000+
   '**1i_information'#000+
   '**2iD_return compiler date'#000+
   '**2iV_return compiler version'#000+
@@ -605,102 +606,102 @@ const msgtxt : array[0..000110,1..240] of char=(
   '**2iSP_return compiler processor'#000+
   '**2iTO_return target OS'#000+
   '**2iTP_return target processor'#000+
-  '**1I<x>_adds <x> to include pa','th'#000+
+  '**1I<','x>_adds <x> to include path'#000+
   '**1k<x>_Pass <x> to the linker'#000+
   '**1l_write logo'#000+
   '**1n_don'#039't read the default config file'#000+
   '**1o<x>_change the name of the executable produced to <x>'#000+
   '**1pg_generate profile code for gprof (defines FPC_PROFILE)'#000+
-  '*L1P_use pipes instead of creati','ng temporary assembler files'#000+
+  '*L1P_us','e pipes instead of creating temporary assembler files'#000+
   '**1S<x>_syntax options:'#000+
   '**2S2_switch some Delphi 2 extensions on'#000+
   '**2Sc_supports operators like C (*=,+=,/= and -=)'#000+
   '**2sa_include assertion code.'#000+
   '**2Sd_tries to be Delphi compatible'#000+
-  '**2Se<x>_compiler stops after ','the <x> errors (default is 1)'#000+
+  '**2Se','<x>_compiler stops after the <x> errors (default is 1)'#000+
   '**2Sg_allow LABEL and GOTO'#000+
   '**2Sh_Use ansistrings'#000+
   '**2Si_support C++ styled INLINE'#000+
   '**2Sm_support macros like C (global)'#000+
   '**2So_tries to be TP/BP 7.0 compatible'#000+
-  '**2Sp_tries to be gpc compatible'#000+
-  '**2Ss_constructor na','me must be init (destructor must be done)'#000+
+  '**2Sp_tries to be gpc compat','ible'#000+
+  '**2Ss_constructor name must be init (destructor must be done)'#000+
   '**2St_allow static keyword in objects'#000+
   '**1s_don'#039't call assembler and linker (only with -a)'#000+
   '**1u<x>_undefines the symbol <x>'#000+
   '**1U_unit options:'#000+
-  '**2Un_don'#039't check the unit name'#000+
-  '**2Us_compile a system u','nit'#000+
+  '**2Un_don'#039't check the unit name',#000+
+  '**2Us_compile a system unit'#000+
   '**1v<x>_Be verbose. <x> is a combination of the following letters:'#000+
   '**2*_e : Show errors (default)       d : Show debug info'#000+
   '**2*_w : Show warnings               u : Show unit info'#000+
-  '**2*_n : Show notes                  t : Show tried/used',' files'#000+
+  '**2*_n : Show notes            ','      t : Show tried/used files'#000+
   '**2*_h : Show hints                  m : Show defined macros'#000+
   '**2*_i : Show general info           p : Show compiled procedures'#000+
   '**2*_l : Show linenumbers            c : Show conditionals'#000+
-  '**2*_a : Show everything             0 : Show n','othing (except errors'+
+  '**2*_a : Show everythi','ng             0 : Show nothing (except errors'+
   ')'#000+
   '**2*_b : Show all procedure          r : Rhide/GCC compatibility mode'#000+
   '**2*_    declarations if an error    x : Executable info (Win32 only)'#000+
   '**2*_    occurs'#000+
   '**1X_executable options:'#000+
-  '*L2Xc_link with the c library'#000+
-  '**2Xs_','strip all symbols from executable'#000+
+  '*L2Xc_link ','with the c library'#000+
+  '**2Xs_strip all symbols from executable'#000+
   '**2XD_try to link dynamic          (defines FPC_LINK_DYNAMIC)'#000+
   '**2XS_try to link static (default) (defines FPC_LINK_STATIC)'#000+
-  '**2XX_try to link smart            (defines FPC_LINK_SMART)'#000+
-  '**0*_Processor specific',' options:'#000+
+  '**2XX_try to link smart            (defines FPC_LINK_SMART',')'#000+
+  '**0*_Processor specific options:'#000+
   '3*1A<x>_output format:'#000+
   '3*2Aas_assemble using GNU AS'#000+
   '3*2Aasaout_assemble using GNU AS for aout (Go32v1)'#000+
   '3*2Anasmcoff_coff (Go32v2) file using Nasm'#000+
   '3*2Anasmelf_elf32 (Linux) file using Nasm'#000+
-  '3*2Anasmobj_obj file using Nasm'#000+
-  '3*2Amasm_o','bj file using Masm (Microsoft)'#000+
+  '3*2Anasmobj_obj f','ile using Nasm'#000+
+  '3*2Amasm_obj file using Masm (Microsoft)'#000+
   '3*2Atasm_obj file using Tasm (Borland)'#000+
   '3*2Acoff_coff (Go32v2) using internal writer'#000+
   '3*2Apecoff_pecoff (Win32) using internal writer'#000+
   '3*1R<x>_assembler reading style:'#000+
-  '3*2Ratt_read AT&T style assembler'#000+
-  '3*2Rintel_','read Intel style assembler'#000+
+  '3*2Ratt_read AT&T s','tyle assembler'#000+
+  '3*2Rintel_read Intel style assembler'#000+
   '3*2Rdirect_copy assembler text directly to assembler file'#000+
   '3*1O<x>_optimizations:'#000+
   '3*2Og_generate smaller code'#000+
   '3*2OG_generate faster code (default)'#000+
-  '3*2Or_keep certain variables in registers'#000+
-  '3*2Ou_enable uncertain op','timizations (see docs)'#000+
+  '3*2Or_keep certain variables in registers'#000,
+  '3*2Ou_enable uncertain optimizations (see docs)'#000+
   '3*2O1_level 1 optimizations (quick optimizations)'#000+
   '3*2O2_level 2 optimizations (-O1 + slower optimizations)'#000+
   '3*2O3_level 3 optimizations (same as -O2u)'#000+
   '3*2Op<x>_target processor:'#000+
-  '3*3Op1_set target processor to 386/486'#000+
-  '3','*3Op2_set target processor to Pentium/PentiumMMX (tm)'#000+
+  '3*3Op1_set targ','et processor to 386/486'#000+
+  '3*3Op2_set target processor to Pentium/PentiumMMX (tm)'#000+
   '3*3Op3_set target processor to PPro/PII/c6x86/K6 (tm)'#000+
   '3*1T<x>_Target operating system:'#000+
   '3*2TGO32V1_version 1 of DJ Delorie DOS extender'#000+
-  '3*2TGO32V2_version 2 of DJ Delorie DOS extender'#000+
-  '3*2','TLINUX_Linux'#000+
+  '3*2TGO32V2_version 2 of DJ',' Delorie DOS extender'#000+
+  '3*2TLINUX_Linux'#000+
   '3*2TOS2_OS/2 2.x'#000+
   '3*2TWin32_Windows 32 Bit'#000+
   '3*1W<x>_Win32 target options'#000+
   '3*2WB<x>_Set Image base to Hexadecimal <x> value'#000+
   '3*2WC_Specify console type application'#000+
-  '3*2WD_Use DEFFILE to export functions of DLL or EXE'#000+
-  '3*2WG_Specify gr','aphic type application'#000+
+  '3*2WD_Use DEFFILE to export functions of DL','L or EXE'#000+
+  '3*2WG_Specify graphic type application'#000+
   '3*2WN_Do not generate relocation code (necessary for debugging)'#000+
   '3*2WR_Generate relocation code'#000+
   '6*1A<x>_output format'#000+
   '6*2Aas_Unix o-file using GNU AS'#000+
   '6*2Agas_GNU Motorola assembler'#000+
-  '6*2Amit_MIT Syntax (old GAS)'#000+
-  '6*2Amot_','Standard Motorola assembler'#000+
+  '6*2Amit_MIT ','Syntax (old GAS)'#000+
+  '6*2Amot_Standard Motorola assembler'#000+
   '6*1O_optimizations:'#000+
   '6*2Oa_turn on the optimizer'#000+
   '6*2Og_generate smaller code'#000+
   '6*2OG_generate faster code (default)'#000+
   '6*2Ox_optimize maximum (still BUGGY!!!)'#000+
-  '6*2O2_set target processor to a MC68020+'#000+
-  '6*1R<x>_assembler ','reading style:'#000+
+  '6*2O2_set target processor to a MC','68020+'#000+
+  '6*1R<x>_assembler reading style:'#000+
   '6*2RMOT_read motorola style assembler'#000+
   '6*1T<x>_Target operating system:'#000+
   '6*2TAMIGA_Commodore Amiga'#000+
@@ -709,5 +710,5 @@ const msgtxt : array[0..000110,1..240] of char=(
   '6*2TLINUX_Linux-68k'#000+
   '**1*_'#000+
   '**1?_shows this help'#000+
-  '**1h_shows this help without w','aiting'#000
+  '**1h_','shows this help without waiting'#000
 );