+ partly converted english errors to dutch

compiler/errorn.msg

@@ -0,0 +1,425 @@
+;
+; Dutch messagefile for Free Pascal Compiler
+;
+; The letters until the _ indicate which type of message will be displayed,
+; they are listed in order of importance, combinations may be made. The
+; default when no type is listed is V_Default (=Error)
+;  F - Fatal Error
+;  E - Error
+;  W - Warning
+;  N - Note
+;  H - Hint
+;  I - Info
+;  L - Linenumber
+;  U - Used
+;  T - Tried
+;  M - Macro
+;  P - Procedure
+;  C - Conditional
+;  D - Debug
+; Special cases:
+;  S - Stop the compiler after displaying the message
+;
+; Warning: When this file is loaded at runtime, the comments are also
+;          loaded to the memory
+;
+I_$1 kB vrij
+L_$1 lijnen $2 kB vrij
+I_$1 stream kB gebruikt
+I_$1 EMS kB gebruikt
+I_Compiler: $1
+I_Units gezocht in: $1
+D_Bron OS: $1
+I_Doel OS: $1
+U_Programma pad: $1
+U_GNU C bibliotheek: $1
+I_$1 Lijnen gecompileerd, $2 sec
+;
+; Scanner (also scanner part of the assembler)
+;
+F_Onverwacht einde van bestand
+F_String langer dan lijn
+F_illegaal karakter
+F_Syntax fout: $2 verwacht in kolom $1
+U_Start lezen ingevoegd bestand $1
+W_Commentaar niveau $1 gevonden
+N_$F directive (FAR) genegeerd
+N_Stapel check is globaal onder linux
+W_Illegale compiler schakelaar
+W_Deze compiler schakelaar heeft ook een globaal effect
+E_Illegale karakter constante
+F_kan bestand niet openen
+F_Kan ingevoerd bestand niet openen $1
+E_Te veel $ENDIFs of $ELSEs
+W_Record velden kunnen maar op 1,2 of 4 bytes gealigneerd worden.
+E_$ENDIF verwacht voor $1 op $2 $3
+E_Syntax fout bij het compileren van een conditionele compilatie uitdrukking
+E_Evalueren van een conditionele compilatie uitdrukking
+W_Macro inhoud is afgsneden op 255 karakters voor evaluatie
+E_ENDIF zonder IF(N)DEF
+F_Gebruiker definitie: $1
+E_Gebruiker definitie: $1
+W_Gebruiker definitie: $1
+N_Gebruiker definitie: $1
+H_Gebruiker definitie: $1
+I_Gebruiker definitie: $1
+E_Sleutelwoord herdefinieren als macro heeft geen effect
+F_Macro buffer overflow bij lezen of expanderen van macro
+W_Expansie van macro meer dan 16 niveus diep, waarschijnlijk een recursieve macro
+E_compiler schakelaar is niet toegestaan in (* ... *) commentaar
+D_Behandel schakelaar "$1"
+C_ENDIF $1 gevonden
+C_IFDEF $1 gevonden, $2
+C_IFOPT $1 gevonden, $2
+C_IF $1 gevonden, $2
+C_IFNDEF $1 gevonden, $2
+C_ELSE $1 gevonden, $2
+C_Negeer tot...
+I_Druk <return> om voort te gaan
+;
+; Parser
+;
+E_Parser - Syntax fout
+W_Procedure type FAR genegeerd
+W_Procedure type NEAR genegeerd
+E_geen DLL File gespecifieerd
+E_Constructor naam moet INIT zijn
+E_Destructor name moet DONE zijn
+E_Illegale open parameter
+E_Procedure type INLINE is niet ondersteund
+W_Private methodes zijn niet VIRTUAL
+E_Constructor mag niet private or protected zijn
+E_Destructor mag niet private or protected zijn
+N_Class heeft slechts 1 destructor
+E_Lokale class definities zijn niet toegestaan
+E_Anonieme class definities zijn niet toegestaan
+E_Ordinale waarde verwacht
+E_Illegale parameter lijst
+E_overladen identifieerder is geen functie identifieerder
+E_overladen functies hebben identieke parameterlijst
+E_functie hoofding klopt niet met voorwaartse declaratie $1
+N_Slechts waarden kunnen overgeslagen worden in opsommingstypes
+N_Interface and implementatie namen zijn verschillend
+E_functie meer dan 31 keer genest
+E_Bereikfout bij evalueren constantes
+E_Wijzer type verwacht
+E_class type verwacht
+E_Dubbel case geval
+E_Getypeerde constantes van classes zijn niet toegestaan
+E_functie variabelen van overladen functie zijn niet toegestaan
+E_string lengte moet tussen 1 en 255 liggen
+W_Gebruik de uitgebreide syntax van DISPOSE en NEW om nieuwe instanties van classes te genereren
+E_class identifieerder verwacht
+E_methode identifieerder verwacht
+E_function hoofding komt niet overeen met een methode van deze class
+P_procedure/functie $1 ($2) op lijn $3
+E_Illegale drijvende komma constante
+E_FAIL mag slechts in constructors gebruikt worden
+E_Destructors hebben geen parameters
+E_string types stemmen niet overeen, wegens $V+ modus
+E_Alleen class methodes kunnen gerefereerd met classe methodes
+E_Alleen class methodes togankelijk in classen
+E_Constante en CASE type komen niet overeen
+E_Het symbool kan niet uitgevoerd worden van een bibliotheek
+E_Een virtuele methode moet met OVERRIDE overroepen worden: $1
+E_Er is geen ouder methode die overroepen kan worden: $1
+E_No member is provided to access property
+E_Illegal symbol for property access
+E_Cannot write a protected field of an object
+E_all overloaded methods must be virtual if one is virtual: $1
+E_overloaded methods which are virtual must have the same return type: $1
+E_EXPORT declared functions can't be nested
+E_methods can't be EXPORTed
+E_call by var parameters have to match exactly
+E_Class isn't a super class of the current class
+E_SELF is only allowed in methods
+E_methods can be only in other methods called direct with type identifier of the class
+E_Illegal use of ':'
+E_range check error in set constructor or duplicate set element
+E_Pointer to class expected
+E_Expression must be constructor call
+E_Expression must be destructor call
+E_Type conflict between set elements
+W_The operator / isn't defined for integer, the result will be real, use DIV instead
+E_Illegal order of record elements
+E_Expression type must by class or record type
+E_Functions with void return value can't return any value
+E_constructors and destructors must be methods
+W_Automatic type conversion from floating type to COMP which is an integer type
+E_Operator is not overloaded
+E_Variable or type indentifier expected
+E_Re-raise isn't possible there
+E_The extended syntax of new or dispose isn't allowed for a class
+E_Assembler incompatible with function return value
+E_Procedure overloading is switched off
+E_It is not possible to overload this operator (overload = instead)
+E_Comparative operator must return a boolean value
+E_Only virtual methods can be abstract
+F_Use of unsupported feature!
+E_The mix of CLASSES and OBJECTS isn't allowed
+W_Unknown procedure directive had to be ignored: $1
+E_absolute can only be associated to ONE variable
+E_absolute can only be associated a var or const
+E_Abtract methods shouldn't have any definition (with function body)
+E_This overloaded function can't be local (must be exported)
+E_succ or pred on enums with assignments not possible
+W_Virtual methods are used without a constructor
+M_Macro defined: $1
+M_Macro undefined: $1
+M_Macro $1 set to $2
+I_Compiling $1
+D_Compiling $1 for the second time
+E_Array properties aren't allowed at this point
+E_No property found to override
+E_Only one default property is allowed, found inherited default property in class %1
+E_The default property must be an array property
+;
+; Symbol-table errors/warnings
+;
+N_Local variable $1 doesn't seem to be initialized yet !
+E_Identifier not found $1
+F_Internal Error in SymTableStack()
+E_Duplicate identifier $1
+E_Unknown identifier $1
+E_Forward declaration not solved $1
+F_Identifier type already defined as type
+E_Type identifier expected
+E_Type mismatch
+E_Error in type defenition
+E_Type identifier not defined
+E_Only static variables can be used in static methods or outside methods
+E_Invalid call to tvarsym.mangledname()
+F_record or class type expected
+E_To generate an instance of a class or an object with an abtract method isn't allowed
+E_Label not defined $1
+E_Illegal label declaration
+E_GOTO und LABEL are not supported (use command line switch -Sg)
+E_Label not found
+E_identifier isn't a label
+E_label already defined
+E_illegal type declaration of set elements
+E_Forward class definition not resolved $1
+H_Identifier not used $1, declared in line $2
+E_Set elements are not compatible
+E_Set type expected
+W_Function result does not seem to be set
+E_Unknown field identifier
+N_Local variable does not seem to be initialized: $1
+E_identifier idents no member
+;
+; Codegenerator
+;
+E_BREAK not allowed
+E_CONTINUE not allowed
+E_Expression too complicated - FPU stack overflow
+E_Illegal expression
+E_Invalid integer
+E_Illegal qualifier
+E_High range limit < low range limit
+E_Illegal counter variable
+E_Can't determine which overloaded function to call
+E_Parameter list size exceeds 65535 bytes
+E_Illegal type conversion
+E_File types must be var parameters
+E_The use of a far pointer isn't allowed there
+E_illegal call by reference parameters
+E_EXPORT declared functions can't be called
+W_Possible illegal call of constructor or destructor (doesn't match to this context)
+N_Inefficient code
+W_unreachable code
+E_procedure call with stackframe ESP/SP
+E_Abstract methods can't be called directly
+F_Internal Error in getfloatreg(), allocation failure
+F_Unknown float type
+F_SecondVecn() base defined twice
+F_Extended cg68k not supported
+F_32-bit unsigned not supported in MC68000 mode
+F_Internal Error in secondinline()
+D_Register $1 weight $2 $3
+E_Stack limit excedeed in local routine
+D_Stack frame is omited
+;
+; Assembler parsers
+;
+F_Divide by zero in asm evaluator
+F_Evaluator stack overflow
+F_Evaluator stack underflow
+F_Invalid numeric format in asm evaluator
+F_Invalid Operator in asm evaluator
+F_Unknown error in asm evaluator
+W_Invalid numeric value
+E_escape sequence ignored: $1
+E_Asm syntax error - Prefix not found
+E_Asm syntax error - Trying to add more than one prefix
+E_Asm syntax error - Opcode not found
+E_Invalid symbol reference
+W_Calling an overload function in an asm
+E_Constant value out of bounds
+E_Non-label pattern contains @
+E_Invalid Operand: $1
+W_Override operator not supported
+E_Error in binary constant: $1
+E_Error in octal constant: $1
+E_Error in hexadecimal constant: $1
+E_Error in integer constant: $1
+E_Invalid labeled opcode
+F_Internal error in Findtype()
+E_Invalid size for MOVSX/MOVZX
+E_16-bit base in 32-bit segment
+E_16-bit index in 32-bit segment
+E_Invalid Opcode
+E_Constant reference not allowed
+W_Fwait can cause emulation problems with emu387
+E_Invalid combination of opcode and operands
+W_Opcode $1 not in table, operands not checked
+F_Internal Error in ConcatOpcode()
+E_Invalid size in reference
+E_Invalid middle sized operand
+E_Invalid three operand opcode
+E_Assembler syntax error
+E_Invalid operand type
+E_Segment overrides not supported
+E_Invalid constant symbol $1
+F_Internal Errror converting binary
+F_Internal Errror converting hexadecimal
+F_Internal Errror converting octal
+E_Invalid constant expression
+E_Unknown identifier: $1
+E_Trying to define an index register more than once
+E_Invalid field specifier
+F_Internal Error in BuildScaling()
+E_Invalid scaling factor
+E_Invalid scaling value
+E_Scaling value only allowed with index
+E_Invalid assembler syntax. No ref with brackets)
+E_Expressions of the form [sreg:reg...] are currently not supported
+E_Trying to define a segment register twice
+E_Trying to define a base register twice
+E_Trying to use a negative index register
+E_Asm syntax error - error in reference
+E_Local symbols not allowed as references
+E_Invalid operand in bracket expression
+E_Invalid symbol name: $1
+E_Invalid Reference syntax
+E_Invalid string as opcode operand: $1
+W_@CODE and @DATA not supported
+E_Null label references are not allowed
+E_Cannot use SELF outside a method
+E_Asm syntax error - Should start with bracket
+E_Asm syntax error - register: $1
+E_SEG and OFFSET not supported
+E_Asm syntax error - in opcode operand
+E_Invalid String expression
+E_Constant expression out of bounds
+F_Internal Error in BuildConstant()
+W_A repeat prefix and a segment override on <= i386 may result in errors if an interrupt occurs
+E_Invalid or missing opcode
+E_Invalid combination of prefix and opcode: $1
+E_Invalid combination of override and opcode: $1
+E_Too many operands on line
+E_Duplicate local symbol: $1
+E_Unknown label identifer: $1
+E_Assemble node syntax error
+E_Undefined local symbol: $1
+D_Starting intel styled assembler parsing...
+D_Finished intel styled assembler parsing...
+E_Not a directive or local symbol: $1
+E_/ at beginning of line not allowed
+E_NOR not supported
+E_Invalid floating point register name
+W_Modulo not supported
+E_Invalid floating point constant: $1
+E_Size suffix and destination register do not match
+E_Internal error in ConcatLabeledInstr()
+W_Floating point binary representation ignored
+W_Floating point hexadecimal representation ignored
+W_Floating point octal representation ignored
+E_Invalid real constant expression
+E_Parenthesis are not allowed
+E_Invalid Reference
+E_Cannot use __SELF outside a method
+E_Cannot use __OLDEBP outside a nested procedure
+W_Identifier $1 supposed external
+E_Invalid segment override expression
+E_Strings not allowed as constants
+D_Starting AT&T styled assembler parsing...
+D_Finished AT&T styled assembler parsing...
+E_Switching sections is not allowed in an assembler block
+E_Invalid global definition
+E_Line separator expected
+W_globl not supported
+W_align not supported
+W_lcomm not supported
+W_comm not supported
+E_Invalid local common definition
+E_Invalid global common definition
+E_local symbol: $1 not found inside asm statement
+E_assembler code not returned to text
+F_internal error in BuildReference()
+E_invalid opcode size
+W_NEAR ignored
+W_FAR ignored
+D_Creating inline asm lookup tables
+W_Using a defined name as a local label
+F_internal error in HandleExtend()
+E_Invalid character: <
+E_Invalid character: >
+E_Unsupported opcode
+E_Increment and Decrement mode not allowed together
+E_Invalid Register list in movem/fmovem
+E_Invalid Register list for opcode
+E_68020+ mode required to assemble
+D_Starting Motorola styled assembler parsing...
+D_Finished Motorola styled assembler parsing...
+W_XDEF not supported
+W_Functions with void return value can't return any value in asm code
+E_Invalid suffix for intel assembler
+E_Extended not supported in this mode
+E_Comp not supported in this mode
+W_You need GNU as version >= 2.81 to compile this MMX code
+;
+; Exec, calls to assembler, linker, binder, libraries
+;
+I_Assembling (pipe) $1
+E_Can't create assember file $1
+W_Assembler $1 not found, switching to external assembling
+U_Using assembler: $1
+W_Error while assembling
+W_Can't call the assembler, switching to external assembling
+I_Assembling $1
+W_Linker $1 not found, switching to external linking
+U_Using linker: $1
+E_File $1 not found, Linking may fail !!
+W_Error while linking
+W_Can't call the linker, switching to external linking
+I_Linking $1
+W_binder not found, switching to external binding
+W_ar not found, switching to external ar
+E_Dynamic Libraries not supported
+I_Closing script $1
+;
+; Unit handling, PPU file
+;
+U_PPU Loading $1
+D_PPU Time: $1
+D_PPU File too short
+D_PPU Invalid Header (no PPU at the begin)
+D_PPU Invalid Version $1
+D_PPU Flags: $1
+D_PPU Crc: $1
+T_PPU Source: $1
+D_objectfile and assemblerfile are older than ppufile
+D_objectfile is older than assemblerfile
+T_Unitsearch: $1
+U_Writing $1
+F_Can't Write PPU-File
+F_reading PPU-File
+F_Invalid PPU-File entry: $1
+F_PPU Dbx count problem
+E_Illegal unit name: $1
+F_Too much units
+F_Circular unit reference
+F_Can't compile unit $1, no sources available
+W_Compiling the system unit requires the -Us switch
+E_$1 Errors
+F_There were errors compiling module, compilation stopped