* fixed error message for trying to assign to formal parameters and

    to open arrays (mantis #8111)

git-svn-id: trunk@5950 -

compiler/msg/errore.msg

@@ -1325,9 +1325,9 @@ type_h_smaller_possible_range_check=04049_H_Type size mismatch, possible loss of
 % this may cause a range-check error, or may lead to possible loss of data.
 type_e_cant_take_address_of_abstract_method=04050_E_The address of an abstract method can't be taken
 % An abstract method has no body, so the address of an abstract method can't be taken.
-type_e_operator_not_allowed=04051_E_The operator "$1" is not applicable for the operand type combination "$2" and "$3"
-% You are trying an operator that is not available for the type of the
-% operands
+type_e_assignment_not_allowed=04051_E_Assignments to formal parameters and open arrays are not possible
+% You are trying to assign a value to a formal (untyped var, const or out)
+% parameter, or to an open array.
 type_e_constant_expr_expected=04052_E_Constant Expression expected
 % The compiler expects an constant expression, but gets a variable expression.
 type_e_operator_not_supported_for_types=04053_E_Operation "$1" not supported for types "$2" and "$3"

compiler/msgidx.inc

@@ -365,7 +365,7 @@ const
   type_w_smaller_possible_range_check=04048;
   type_h_smaller_possible_range_check=04049;
   type_e_cant_take_address_of_abstract_method=04050;
-  type_e_operator_not_allowed=04051;
+  type_e_assignment_not_allowed=04051;
   type_e_constant_expr_expected=04052;
   type_e_operator_not_supported_for_types=04053;
   type_e_illegal_type_conversion=04054;
@@ -715,7 +715,7 @@ const
   option_info=11024;
   option_help_pages=11025;
 
-  MsgTxtSize = 42505;
+  MsgTxtSize = 42488;
 
   MsgIdxMax : array[1..20] of longint=(
     24,82,231,79,63,48,106,22,135,60,

compiler/msgtxt.inc

@@ -410,290 +410,290 @@ const msgtxt : array[0..000177,1..240] of char=(
   '04048_W_Type size mismatch, possible loss of data / range check error'#000+
   '04049_H_Type size mismatch, possible loss of data / range check error'#000+
   '04050_E_The address of an abstract method can'#039't be taken'#000+
-  '04051_E_The operator "$1" is not applicab','le for the operand type com'+
-  'bination "$2" and "$3"'#000+
+  '04051_E_Assignments to formal parameters ','and open arrays are not pos'+
+  'sible'#000+
   '04052_E_Constant Expression expected'#000+
   '04053_E_Operation "$1" not supported for types "$2" and "$3"'#000+
   '04054_E_Illegal type conversion: "$1" to "$2"'#000+
-  '04055_H_Conversion between ordinals and pointe','rs is not portable'#000+
+  '04055_H_Conversion between ordinals and pointers is not portabl','e'#000+
   '04056_W_Conversion between ordinals and pointers is not portable'#000+
   '04057_E_Can'#039't determine which overloaded function to call'#000+
   '04058_E_Illegal counter variable'#000+
-  '04059_W_Converting constant real value to double for C variable a','rgu'+
-  'ment, add explicit typecast to prevent this.'#000+
+  '04059_W_Converting constant real value to double for C variable argume'+
+  'nt, add expl','icit typecast to prevent this.'#000+
   '04060_E_Class or COM interface type expected, but got "$1"'#000+
   '04061_E_Constant packed arrays are not yet supported'#000+
   '04062_E_Incompatible type for arg no. $1: Got "$2" expected "(Bit)Pack'+
-  'ed Array"'#000,
-  '04063_E_Incompatible type for arg no. $1: Got "$2" expected "(not pack'+
-  'ed) Array"'#000+
+  'ed Array"'#000+
+  '04063_E_Incompati','ble type for arg no. $1: Got "$2" expected "(not pa'+
+  'cked) Array"'#000+
   '04064_E_Elements of packed arrays cannot be of a type which need to be'+
   ' initialised'#000+
   '04065_E_Constant packed records and objects are not yet supported'#000+
-  '04066_W_Ar','ithmetic "$1" on untyped pointer is unportable to {$T+}, s'+
+  '04066_W_Arithmetic "$1" on ','untyped pointer is unportable to {$T+}, s'+
   'uggest typecast'#000+
   '04076_E_Can'#039't take address of a subroutine marked as local'#000+
   '04077_E_Can'#039't export subroutine marked as local from a unit'#000+
   '04078_E_Type is not automatable: "$1"'#000+
-  '05000_E_I','dentifier not found "$1"'#000+
+  '05000_E_Identifier not fou','nd "$1"'#000+
   '05001_F_Internal Error in SymTableStack()'#000+
   '05002_E_Duplicate identifier "$1"'#000+
   '05003_H_Identifier already defined in $1 at line $2'#000+
   '05004_E_Unknown identifier "$1"'#000+
   '05005_E_Forward declaration not solved "$1"'#000+
-  '05007_E_Err','or in type definition'#000+
+  '05007_E_Error in type defini','tion'#000+
   '05009_E_Forward type not resolved "$1"'#000+
   '05010_E_Only static variables can be used in static methods or outside'+
   ' methods'#000+
   '05012_F_record or class type expected'#000+
-  '05013_E_Instances of classes or objects with an abstract metho','d are '+
-  'not allowed'#000+
+  '05013_E_Instances of classes or objects with an abstract method are no'+
+  't allowed',#000+
   '05014_W_Label not defined "$1"'#000+
   '05015_E_Label used but not defined "$1"'#000+
   '05016_E_Illegal label declaration'#000+
   '05017_E_GOTO and LABEL are not supported (use switch -Sg)'#000+
   '05018_E_Label not found'#000+
   '05019_E_identifier isn'#039't a label'#000+
-  '05','020_E_label already defined'#000+
+  '05020_E_label alrea','dy defined'#000+
   '05021_E_illegal type declaration of set elements'#000+
   '05022_E_Forward class definition not resolved "$1"'#000+
   '05023_H_Unit "$1" not used in $2'#000+
   '05024_H_Parameter "$1" not used'#000+
   '05025_N_Local variable "$1" not used'#000+
-  '05026_H_Va','lue parameter "$1" is assigned but never used'#000+
+  '05026_H_Value parameter "$1','" is assigned but never used'#000+
   '05027_N_Local variable "$1" is assigned but never used'#000+
   '05028_H_Local $1 "$2" is not used'#000+
   '05029_N_Private field "$1.$2" is never used'#000+
   '05030_N_Private field "$1.$2" is assigned but never used'#000+
-  '0503','1_N_Private method "$1.$2" never used'#000+
+  '05031_N_Private metho','d "$1.$2" never used'#000+
   '05032_E_Set type expected'#000+
   '05033_W_Function result does not seem to be set'#000+
   '05034_W_Type "$1" is not aligned correctly in current record for C'#000+
   '05035_E_Unknown record field identifier "$1"'#000+
-  '05036_W_Local va','riable "$1" does not seem to be initialized'#000+
+  '05036_W_Local variable "$1" does ','not seem to be initialized'#000+
   '05037_W_Variable "$1" does not seem to be initialized'#000+
   '05038_E_identifier idents no member "$1"'#000+
   '05039_H_Found declaration: $1'#000+
   '05040_E_Data element too large'#000+
-  '05042_E_No matching implementation for i','nterface method "$1" found'#000+
+  '05042_E_No matching implementation for interface method "','$1" found'#000+
   '05043_W_Symbol "$1" is deprecated'#000+
   '05044_W_Symbol "$1" is not portable'#000+
   '05055_W_Symbol "$1" is not implemented'#000+
   '05056_E_Can'#039't create unique type from this type'#000+
-  '05057_H_Local variable "$1" does not seem to be initiali','zed'#000+
-  '05058_H_Variable "$1" does not seem to be initialized'#000+
+  '05057_H_Local variable "$1" does not seem to be initialized'#000+
+  '05058_H_Varia','ble "$1" does not seem to be initialized'#000+
   '05059_W_Function result variable does not seem to initialized'#000+
   '05060_H_Function result variable does not seem to be initialized'#000+
   '05061_W_Variable "$1" read but nowhere assigned'#000+
-  '05062_H','_Found abstract method: $1'#000+
+  '05062_H_Found abstract m','ethod: $1'#000+
   '06009_E_Parameter list size exceeds 65535 bytes'#000+
   '06012_E_File types must be var parameters'#000+
   '06013_E_The use of a far pointer isn'#039't allowed there'#000+
   '06015_E_EXPORT declared functions can'#039't be called'#000+
-  '06016_W_Possible ill','egal call of constructor or destructor'#000+
+  '06016_W_Possible illegal call of cons','tructor or destructor'#000+
   '06017_N_Inefficient code'#000+
   '06018_W_unreachable code'#000+
   '06020_E_Abstract methods can'#039't be called directly'#000+
   '06027_DL_Register $1 weight $2 $3'#000+
   '06029_DL_Stack frame is omitted'#000+
-  '06031_E_Object or class methods can',#039't be inline.'#000+
-  '06032_E_Procvar calls cannot be inline.'#000+
+  '06031_E_Object or class methods can'#039't be inline.'#000+
+  '060','32_E_Procvar calls cannot be inline.'#000+
   '06033_E_No code for inline procedure stored'#000+
   '06035_E_Element zero of an ansi/wide- or longstring can'#039't be acces'+
   'sed, use (set)length instead'#000+
-  '06037_E_Constructors or destructors can not be ','called inside a '#039'w'+
+  '06037_E_Constructors or destructors can not be called inside a '#039,'w'+
   'ith'#039' clause'#000+
   '06038_E_Cannot call message handler methods directly'#000+
   '06039_E_Jump in or outside of an exception block'#000+
   '06040_E_Control flow statements aren'#039't allowed in a finally block'#000+
-  '06041_W_Parameters size exceeds limit for ','certain cpu'#039's'#000+
-  '06042_W_Local variable size exceed limit for certain cpu'#039's'#000+
+  '06041_W_Parameters size exceeds limit for certain cpu'#039's'#000+
+  '060','42_W_Local variable size exceed limit for certain cpu'#039's'#000+
   '06043_E_Local variables size exceeds supported limit'#000+
   '06044_E_BREAK not allowed'#000+
   '06045_E_CONTINUE not allowed'#000+
-  '06046_F_Unknown compilerproc "$1". Check if you use the cor','rect run '+
-  'time library.'#000+
+  '06046_F_Unknown compilerproc "$1". Check if you use the correct run ti'+
+  'me lib','rary.'#000+
   '06047_F_Cannot find system type "$1". Check if you use the correct run'+
   ' time library.'#000+
   '07000_DL_Starting $1 styled assembler parsing'#000+
   '07001_DL_Finished $1 styled assembler parsing'#000+
   '07002_E_Non-label pattern contains @'#000+
-  '070','04_E_Error building record offset'#000+
+  '07004_E_Error buildi','ng record offset'#000+
   '07005_E_OFFSET used without identifier'#000+
   '07006_E_TYPE used without identifier'#000+
   '07007_E_Cannot use local variable or parameters here'#000+
   '07008_E_need to use OFFSET here'#000+
   '07009_E_need to use $ here'#000+
-  '07010_E_Cannot use',' multiple relocatable symbols'#000+
+  '07010_E_Cannot use multiple relocat','able symbols'#000+
   '07011_E_Relocatable symbol can only be added'#000+
   '07012_E_Invalid constant expression'#000+
   '07013_E_Relocatable symbol is not allowed'#000+
   '07014_E_Invalid reference syntax'#000+
   '07015_E_You can not reach $1 from that code'#000+
-  '07016_E_Lo','cal symbols/labels aren'#039't allowed as references'#000+
+  '07016_E_Local symbols/label','s aren'#039't allowed as references'#000+
   '07017_E_Invalid base and index register usage'#000+
   '07018_W_Possible error in object field handling'#000+
   '07019_E_Wrong scale factor specified'#000+
   '07020_E_Multiple index register usage'#000+
-  '07021_E_Invalid operand',' type'#000+
-  '07022_E_Invalid string as opcode operand: $1'#000+
+  '07021_E_Invalid operand type'#000+
+  '07022_E_Inv','alid string as opcode operand: $1'#000+
   '07023_W_@CODE and @DATA not supported'#000+
   '07024_E_Null label references are not allowed'#000+
   '07025_E_Divide by zero in asm evaluator'#000+
   '07026_E_Illegal expression'#000+
   '07027_E_escape sequence ignored: $1'#000+
-  '07','028_E_Invalid symbol reference'#000+
+  '07028_E_Invalid sym','bol reference'#000+
   '07029_W_Fwait can cause emulation problems with emu387'#000+
   '07030_W_$1 without operand translated into $1P'#000+
   '07031_W_ENTER instruction is not supported by Linux kernel'#000+
-  '07032_W_Calling an overload function in assemble','r'#000+
-  '07033_E_Unsupported symbol type for operand'#000+
+  '07032_W_Calling an overload function in assembler'#000+
+  '07033_E_Unsuppo','rted symbol type for operand'#000+
   '07034_E_Constant value out of bounds'#000+
   '07035_E_Error converting decimal $1'#000+
   '07036_E_Error converting octal $1'#000+
   '07037_E_Error converting binary $1'#000+
   '07038_E_Error converting hexadecimal $1'#000+
-  '07039_H_$1 t','ranslated to $2'#000+
-  '07040_W_$1 is associated to an overloaded function'#000+
+  '07039_H_$1 translated to $2'#000+
+  '0','7040_W_$1 is associated to an overloaded function'#000+
   '07041_E_Cannot use SELF outside a method'#000+
   '07042_E_Cannot use OLDEBP outside a nested procedure'#000+
   '07043_W_Procedures can'#039't return any value in asm code'#000+
-  '07044_E_SEG not supported',#000+
-  '07045_E_Size suffix and destination or source size do not match'#000+
+  '07044_E_SEG not supported'#000+
+  '07045_E_Size suf','fix and destination or source size do not match'#000+
   '07046_W_Size suffix and destination or source size do not match'#000+
   '07047_E_Assembler syntax error'#000+
   '07048_E_Invalid combination of opcode and operands'#000+
-  '07049_E_Assembler syntax erro','r in operand'#000+
-  '07050_E_Assembler syntax error in constant'#000+
+  '07049_E_Assembler syntax error in operand'#000+
+  '0705','0_E_Assembler syntax error in constant'#000+
   '07051_E_Invalid String expression'#000+
   '07052_W_constant with symbol $1 for address which is not on a pointer'#000+
   '07053_E_Unrecognized opcode $1'#000+
   '07054_E_Invalid or missing opcode'#000+
-  '07055_E_Invalid',' combination of prefix and opcode: $1'#000+
+  '07055_E_Invalid combination of p','refix and opcode: $1'#000+
   '07056_E_Invalid combination of override and opcode: $1'#000+
   '07057_E_Too many operands on line'#000+
   '07058_W_NEAR ignored'#000+
   '07059_W_FAR ignored'#000+
   '07060_E_Duplicate local symbol $1'#000+
   '07061_E_Undefined local symbol $1'#000+
-  '0706','2_E_Unknown label identifier $1'#000+
+  '07062_E_Unknown label',' identifier $1'#000+
   '07063_E_Invalid register name'#000+
   '07064_E_Invalid floating point register name'#000+
   '07066_W_Modulo not supported'#000+
   '07067_E_Invalid floating point constant $1'#000+
   '07068_E_Invalid floating point expression'#000+
-  '07069_E_Wrong symbo','l type'#000+
-  '07070_E_Cannot index a local var or parameter with a register'#000+
+  '07069_E_Wrong symbol type'#000+
+  '07070_E_Ca','nnot index a local var or parameter with a register'#000+
   '07071_E_Invalid segment override expression'#000+
   '07072_W_Identifier $1 supposed external'#000+
   '07073_E_Strings not allowed as constants'#000+
   '07074_No type of variable specified'#000+
-  '07075_E_as','sembler code not returned to text section'#000+
+  '07075_E_assembler code not ','returned to text section'#000+
   '07076_E_Not a directive or local symbol $1'#000+
   '07077_E_Using a defined name as a local label'#000+
   '07078_E_Dollar token is used without an identifier'#000+
   '07079_W_32bit constant created for address'#000+
-  '07080_N_.align ','is target specific, use .balign or .p2align'#000+
+  '07080_N_.align is target specifi','c, use .balign or .p2align'#000+
   '07081_E_Can'#039't access fields directly for parameters'#000+
   '07082_E_Can'#039't access fields of objects/classes directly'#000+
   '07083_E_No size specified and unable to determine the size of the oper'+
   'ands'#000+
-  '07084_E_Canno','t use RESULT in this function'#000+
+  '07084_E_Cannot use RESULT in t','his function'#000+
   '07086_W_"$1" without operand translated into "$1 %st,%st(1)"'#000+
   '07087_W_"$1 %st(n)" translated into "$1 %st,%st(n)"'#000+
   '07088_W_"$1 %st(n)" translated into "$1 %st(n),%st"'#000+
   '07089_E_Char < not allowed here'#000+
-  '07090_E_Char ','> not allowed here'#000+
+  '07090_E_Char > not allowed her','e'#000+
   '07093_W_ALIGN not supported'#000+
   '07094_E_Inc and Dec cannot be together'#000+
   '07095_E_Invalid reglist for movem'#000+
   '07096_E_Reglist invalid for opcode'#000+
   '07097_E_Higher cpu mode required ($1)'#000+
-  '07098_W_No size specified and unable to determi','ne the size of the op'+
+  '07098_W_No size specified and unable to determine the size of th','e op'+
   'erands, using DWORD as default'#000+
   '07099_E_Syntax error while trying to parse a shifter operand'#000+
   '07100_E_Address of packed component is not at a byte boundary'#000+
-  '07101_W_No size specified and unable to determine the size of the',' op'+
-  'erands, using BYTE as default'#000+
+  '07101_W_No size specified and unable to determine the size of the oper'+
+  'ands, using ','BYTE as default'#000+
   '07102_W_Use of +offset(%ebp) for parameters invalid here'#000+
   '07103_W_Use of +offset(%ebp) is not compatible with regcall convention'+
   #000+
   '07104_W_Use of -offset(%ebp) is not recommended for local variable acc'+
   'ess'#000+
-  '07105','_W_Use of -offset(%esp), value may be crashed'#000+
+  '07105_W_Use of -offset','(%esp), value may be crashed'#000+
   '08000_F_Too many assembler files'#000+
   '08001_F_Selected assembler output not supported'#000+
   '08002_F_Comp not supported'#000+
   '08003_F_Direct not support for binary writers'#000+
-  '08004_E_Allocating of data is only allow','ed in bss section'#000+
+  '08004_E_Allocating of data is only allowed in bss section',#000+
   '08005_F_No binary writer selected'#000+
   '08006_E_Asm: Opcode $1 not in table'#000+
   '08007_E_Asm: $1 invalid combination of opcode and operands'#000+
   '08008_E_Asm: 16 Bit references not supported'#000+
   '08009_E_Asm: Invalid effective address'#000+
-  '08010_E_A','sm: Immediate or reference expected'#000+
+  '08010_E_Asm: Immediate or ','reference expected'#000+
   '08011_E_Asm: $1 value exceeds bounds $2'#000+
   '08012_E_Asm: Short jump is out of range $1'#000+
   '08013_E_Asm: Undefined label $1'#000+
   '08014_E_Asm: Comp type not supported for this target'#000+
-  '08015_E_Asm: Extended type not suppo','rted for this target'#000+
+  '08015_E_Asm: Extended type not supported for this tar','get'#000+
   '08016_E_Asm: Duplicate label $1'#000+
   '08017_E_Asm: Redefined label $1'#000+
   '08018_E_Asm: First defined here'#000+
   '08019_E_Asm: Invalid register $1'#000+
   '08020_E_Asm: 16 or 32 Bit references not supported'#000+
-  '08021_E_Asm: 64 Bit operands not suppor','ted'#000+
-  '09000_W_Source operating system redefined'#000+
+  '08021_E_Asm: 64 Bit operands not supported'#000+
+  '09000_W_Sourc','e operating system redefined'#000+
   '09001_I_Assembling (pipe) $1'#000+
   '09002_E_Can'#039't create assembler file: $1'#000+
   '09003_E_Can'#039't create object file: $1'#000+
   '09004_E_Can'#039't create archive file: $1'#000+
-  '09005_E_Assembler $1 not found, switching to exter','nal assembling'#000+
-  '09006_T_Using assembler: $1'#000+
+  '09005_E_Assembler $1 not found, switching to external assembling'#000+
+  '09','006_T_Using assembler: $1'#000+
   '09007_E_Error while assembling exitcode $1'#000+
   '09008_E_Can'#039't call the assembler, error $1 switching to external a'+
   'ssembling'#000+
   '09009_I_Assembling $1'#000+
   '09010_I_Assembling with smartlinking $1'#000+
-  '09011_W_Object $','1 not found, Linking may fail !'#000+
+  '09011_W_Object $1 not found, Link','ing may fail !'#000+
   '09012_W_Library $1 not found, Linking may fail !'#000+
   '09013_E_Error while linking'#000+
   '09014_E_Can'#039't call the linker, switching to external linking'#000+
   '09015_I_Linking $1'#000+
-  '09016_E_Util $1 not found, switching to external li','nking'#000+
-  '09017_T_Using util $1'#000+
+  '09016_E_Util $1 not found, switching to external linking'#000+
+  '09017_T_Usi','ng util $1'#000+
   '09018_E_Creation of Executables not supported'#000+
   '09019_E_Creation of Dynamic/Shared Libraries not supported'#000+
   '09020_I_Closing script $1'#000+
   '09021_E_resource compiler not found, switching to external mode'#000+
-  '09022_I_Compiling',' resource $1'#000+
-  '09023_T_unit $1 can'#039't be statically linked, switching to smart lin'+
-  'king'#000+
+  '09022_I_Compiling resource $1'#000+
+  '0902','3_T_unit $1 can'#039't be statically linked, switching to smart l'+
+  'inking'#000+
   '09024_T_unit $1 can'#039't be smart linked, switching to static linking'+
   #000+
   '09025_T_unit $1 can'#039't be shared linked, switching to static linkin'+
   'g'#000+
-  '09026_E_unit $1 can'#039't',' be smart or static linked'#000+
+  '09026_E_unit $1 can'#039't be smart or stat','ic linked'#000+
   '09027_E_unit $1 can'#039't be shared or static linked'#000+
   '09028_D_Calling resource compiler "$1" with "$2" as command line'#000+
   '09128_F_Can'#039't post process executable $1'#000+
   '09129_F_Can'#039't open executable $1'#000+
-  '09130_X_Size of Code: $1 ','bytes'#000+
-  '09131_X_Size of initialized data: $1 bytes'#000+
+  '09130_X_Size of Code: $1 bytes'#000+
+  '09131_X_Siz','e of initialized data: $1 bytes'#000+
   '09132_X_Size of uninitialized data: $1 bytes'#000+
   '09133_X_Stack space reserved: $1 bytes'#000+
   '09134_X_Stack space committed: $1 bytes'#000+
   '10000_T_Unitsearch: $1'#000+
   '10001_T_PPU Loading $1'#000+
-  '10002_U_PPU Name: $1'#000,
-  '10003_U_PPU Flags: $1'#000+
+  '10002_U_PPU Name: $1'#000+
+  '10003_U_PPU Flags',': $1'#000+
   '10004_U_PPU Crc: $1'#000+
   '10005_U_PPU Time: $1'#000+
   '10006_U_PPU File too short'#000+
   '10007_U_PPU Invalid Header (no PPU at the begin)'#000+
   '10008_U_PPU Invalid Version $1'#000+
   '10009_U_PPU is compiled for another processor'#000+
-  '10010_U_PPU is compiled ','for an other target'#000+
+  '10010_U_PPU is compiled for an other targ','et'#000+
   '10011_U_PPU Source: $1'#000+
   '10012_U_Writing $1'#000+
   '10013_F_Can'#039't Write PPU-File'#000+
@@ -701,93 +701,93 @@ const msgtxt : array[0..000177,1..240] of char=(
   '10015_F_unexpected end of PPU-File'#000+
   '10016_F_Invalid PPU-File entry: $1'#000+
   '10017_F_PPU Dbx count problem'#000+
-  '10018_E_Illegal un','it name: $1'#000+
-  '10019_F_Too much units'#000+
+  '10018_E_Illegal unit name: $1'#000+
+  '10019','_F_Too much units'#000+
   '10020_F_Circular unit reference between $1 and $2'#000+
   '10021_F_Can'#039't compile unit $1, no sources available'#000+
   '10022_F_Can'#039't find unit $1'#000+
   '10023_W_Unit $1 was not found but $2 exists'#000+
-  '10024_F_Unit $1 searched but $2 ','found'#000+
-  '10025_W_Compiling the system unit requires the -Us switch'#000+
+  '10024_F_Unit $1 searched but $2 found'#000+
+  '10025_W_Com','piling the system unit requires the -Us switch'#000+
   '10026_F_There were $1 errors compiling module, stopping'#000+
   '10027_U_Load from $1 ($2) unit $3'#000+
   '10028_U_Recompiling $1, checksum changed for $2'#000+
-  '10029_U_Recompiling $1, source found o','nly'#000+
-  '10030_U_Recompiling unit, static lib is older than ppufile'#000+
+  '10029_U_Recompiling $1, source found only'#000+
+  '10030_U_Recom','piling unit, static lib is older than ppufile'#000+
   '10031_U_Recompiling unit, shared lib is older than ppufile'#000+
   '10032_U_Recompiling unit, obj and asm are older than ppufile'#000+
   '10033_U_Recompiling unit, obj is older than asm'#000+
-  '10034_U_P','arsing interface of $1'#000+
+  '10034_U_Parsing interface ','of $1'#000+
   '10035_U_Parsing implementation of $1'#000+
   '10036_U_Second load for unit $1'#000+
   '10037_U_PPU Check file $1 time $2'#000+
   '10040_W_Can'#039't recompile unit $1, but found modifed include files'#000+
   '10041_U_File $1 is newer than PPU file $2'#000+
-  '10042_U','_Using a unit which was not compiled with correct FPU mode'#000+
+  '10042_U_Using a unit whi','ch was not compiled with correct FPU mode'#000+
   '10043_U_Loading interface units from $1'#000+
   '10044_U_Loading implementation units from $1'#000+
   '10045_U_Interface CRC changed for unit $1'#000+
   '10046_U_Implementation CRC changed for unit $1'#000+
-  '10047_U','_Finished compiling unit $1'#000+
+  '10047_U_Finished compili','ng unit $1'#000+
   '10048_U_Add dependency of $1 to $2'#000+
   '10049_U_No reload, is caller: $1'#000+
   '10050_U_No reload, already in second compile: $1'#000+
   '10051_U_Flag for reload: $1'#000+
   '10052_U_Forced reloading'#000+
   '10053_U_Previous state of $1: $2'#000+
-  '10054_U_A','lready compiling $1, setting second compile'#000+
+  '10054_U_Already compiling ','$1, setting second compile'#000+
   '10055_U_Loading unit $1'#000+
   '10056_U_Finished loading unit $1'#000+
   '10057_U_Registering new unit $1'#000+
   '10058_U_Re-resolving unit $1'#000+
   '10059_U_Skipping re-resolving unit $1, still loading used units'#000+
-  '11000_O_$1 [op','tions] <inputfile> [options]'#000+
+  '11000_O_$1 [options] <inputfile','> [options]'#000+
   '11001_W_Only one source file supported'#000+
   '11002_W_DEF file can be created only for OS/2'#000+
   '11003_E_nested response files are not supported'#000+
   '11004_F_No source file name in command line'#000+
-  '11005_N_No option inside $1 config',' file'#000+
-  '11006_E_Illegal parameter: $1'#000+
+  '11005_N_No option inside $1 config file'#000+
+  '11006_E_Ill','egal parameter: $1'#000+
   '11007_H_-? writes help pages'#000+
   '11008_F_Too many config files nested'#000+
   '11009_F_Unable to open file $1'#000+
   '11010_D_Reading further options from $1'#000+
   '11011_W_Target is already set to: $1'#000+
-  '11012_W_Shared libs not suppor','ted on DOS platform, reverting to stat'+
+  '11012_W_Shared libs not supported on DOS platfo','rm, reverting to stat'+
   'ic'#000+
   '11013_F_too many IF(N)DEFs'#000+
   '11014_F_too many ENDIFs'#000+
   '11015_F_open conditional at the end of the file'#000+
   '11016_W_Debug information generation is not supported by this executab'+
   'le'#000+
-  '11017_H_Try recompiling wit','h -dGDB'#000+
-  '11018_W_You are using the obsolete switch $1'#000+
+  '11017_H_Try recompiling with -dGDB'#000+
+  '11018_W_Y','ou are using the obsolete switch $1'#000+
   '11019_W_You are using the obsolete switch $1, please use $2'#000+
   '11020_N_Switching assembler to default source writing assembler'#000+
-  '11021_W_Assembler output selected "$1" is not compatible with "','$2"'#000+
-  '11022_W_"$1" assembler use forced'#000+
+  '11021_W_Assembler output selected "$1" is not compatible with "$2"'#000+
+  '11022_W_"$1" ','assembler use forced'#000+
   '11026_T_Reading options from file $1'#000+
   '11027_T_Reading options from environment $1'#000+
   '11028_D_Handling option "$1"'#000+
   '11029__*** press enter ***'#000+
   '11030_H_Start of reading config file $1'#000+
-  '11031_H_End of reading co','nfig file $1'#000+
-  '11032_D_interpreting option "$1"'#000+
+  '11031_H_End of reading config file $1'#000+
+  '1103','2_D_interpreting option "$1"'#000+
   '11036_D_interpreting firstpass option "$1"'#000+
   '11033_D_interpreting file option "$1"'#000+
   '11034_D_Reading config file "$1"'#000+
   '11035_D_found source file name "$1"'#000+
   '11039_E_Unknown code page'#000+
-  '11040_F_Config fil','e $1 is a directory'#000+
+  '11040_F_Config file $1 is a directo','ry'#000+
   '11023_Free Pascal Compiler version $FPCFULLVERSION [$FPCDATE] for $FPC'+
   'CPU'#010+
   'Copyright (c) 1993-2006 by Florian Klaempfl'#000+
   '11024_Free Pascal Compiler version $FPCVERSION'#010+
   #010+
   'Compiler Date      : $FPCDATE'#010+
-  'Compiler CPU Target: $FP','CCPU'#010+
+  'Compiler CPU Target: $FPCCPU'#010+
   #010+
-  'Supported targets:'#010+
+  'Supported t','argets:'#010+
   '  $OSTARGETS'#010+
   #010+
   'Supported CPU instruction sets:'#010+
@@ -799,38 +799,38 @@ const msgtxt : array[0..000177,1..240] of char=(
   'Supported Optimizations:'#010+
   '  $OPTIMIZATIONS'#010+
   #010+
-  'This program comes under the GNU General Public Lic','ence'#010+
-  'For more information read COPYING.FPC'#010+
+  'This program comes under the GNU General Public Licence'#010+
+  'For more inf','ormation read COPYING.FPC'#010+
   #010+
   'Report bugs,suggestions etc to:'#010+
   '                 [email protected]'#000+
   '11025_**0*_put + after a boolean switch option to enable it, - to disa'+
   'ble it'#010+
-  '**1a_the compiler doesn'#039't delete the generated ass','embler file'#010+
-  '**2al_list sourcecode lines in assembler file'#010+
+  '**1a_the compiler doesn'#039't delete the generated assembler file'#010+
+  '**2al','_list sourcecode lines in assembler file'#010+
   '**2an_list node info in assembler file'#010+
   '*L2ap_use pipes instead of creating temporary assembler files'#010+
   '**2ar_list register allocation/release info in assembler file'#010+
-  '**2at_list temp all','ocation/release info in assembler file'#010+
+  '**2at_list temp allocation/release i','nfo in assembler file'#010+
   '**1A<x>_output format:'#010+
   '**2Adefault_use default assembler'#010+
   '3*2Aas_assemble using GNU AS'#010+
   '3*2Anasmcoff_coff (Go32v2) file using Nasm'#010+
   '3*2Anasmelf_elf32 (Linux) file using Nasm'#010+
-  '3*2Anasmwin32_Win32 object fil','e using Nasm'#010+
-  '3*2Anasmwdosx_Win32/WDOSX object file using Nasm'#010+
+  '3*2Anasmwin32_Win32 object file using Nasm'#010+
+  '3*2A','nasmwdosx_Win32/WDOSX object file using Nasm'#010+
   '3*2Awasm_obj file using Wasm (Watcom)'#010+
   '3*2Anasmobj_obj file using Nasm'#010+
   '3*2Amasm_obj file using Masm (Microsoft)'#010+
   '3*2Atasm_obj file using Tasm (Borland)'#010+
-  '3*2Aelf_elf32 (Linux) using ','internal writer'#010+
-  '3*2Acoff_coff (Go32v2) using internal writer'#010+
+  '3*2Aelf_elf32 (Linux) using internal writer'#010+
+  '3','*2Acoff_coff (Go32v2) using internal writer'#010+
   '3*2Apecoff_pecoff (Win32) using internal writer'#010+
   '4*2Aas_assemble using GNU AS'#010+
   '6*2Aas_Unix o-file using GNU AS'#010+
   '6*2Agas_GNU Motorola assembler'#010+
   '6*2Amit_MIT Syntax (old GAS)'#010+
-  '6*2Amot_St','andard Motorola assembler'#010+
+  '6*2Amot_Standard Motorola a','ssembler'#010+
   'A*2Aas_assemble using GNU AS'#010+
   'P*2Aas_assemble using GNU AS'#010+
   'S*2Aas_assemble using GNU AS'#010+
@@ -838,27 +838,27 @@ const msgtxt : array[0..000177,1..240] of char=(
   '**2bl_generate local symbol info'#010+
   '**1B_build all modules'#010+
   '**1C<x>_code generation options:'#010+
-  '**2Cc<x>_se','t default calling convention to <x>'#010+
+  '**2Cc<x>_set default calling',' convention to <x>'#010+
   '**2CD_create also dynamic library (not supported)'#010+
   '**2Ce_Compilation with emulated floating point opcodes'#010+
   '**2Cf<x>_Select fpu instruction set to use, see fpc -i for possible va'+
   'lues'#010+
-  '**2Cg_Generate PIC code'#010,
-  '**2Ch<n>_<n> bytes heap (between 1023 and 67107840)'#010+
+  '**2Cg_Generate PIC code'#010+
+  '**2Ch<n>_<n> byte','s heap (between 1023 and 67107840)'#010+
   '**2Ci_IO-checking'#010+
   '**2Cn_omit linking stage'#010+
   '**2Co_check overflow of integer operations'#010+
   '**2Cp<x>_select instruction set, see fpc -i for possible values'#010+
   '**2CP<x>=<y>_ packing settings'#010+
-  '**3CPPA','CKSET=<y>_ <y> set allocation: 0, 1 or DEFAULT or NORMAL, 2, '+
+  '**3CPPACKSET=<y>_ <y> se','t allocation: 0, 1 or DEFAULT or NORMAL, 2, '+
   '4 and 8'#010+
   '**2Cr_range checking'#010+
   '**2CR_verify object method call validity'#010+
   '**2Cs<n>_set stack size to <n>'#010+
   '**2Ct_stack checking'#010+
   '**2CX_create also smartlinked library'#010+
-  '**1d<x>_defines the',' symbol <x>'#010+
-  '**1D_generate a DEF file'#010+
+  '**1d<x>_defines the symbol <x>'#010+
+  '**1D_','generate a DEF file'#010+
   '**2Dd<x>_set description to <x>'#010+
   '**2Dv<x>_set DLL version to <x>'#010+
   '*O2Dw_PM application'#010+
@@ -866,33 +866,33 @@ const msgtxt : array[0..000177,1..240] of char=(
   '**1E_same as -Cn'#010+
   '**1fPIC_same as -Cg'#010+
   '**1F<x>_set file names and paths:'#010+
-  '**2Fa<x>[,y]_for',' a program load first units <x> and [y] before uses '+
+  '**2Fa<x>[,y]_for a program load f','irst units <x> and [y] before uses '+
   'is parsed'#010+
   '**2Fc<x>_sets input codepage to <x>'#010+
   '**2FD<x>_sets the directory where to search for compiler utilities'#010+
   '**2Fe<x>_redirect error output to <x>'#010+
-  '**2FE<x>_set exe/unit output path to ','<x>'#010+
-  '**2Fi<x>_adds <x> to include path'#010+
+  '**2FE<x>_set exe/unit output path to <x>'#010+
+  '**2Fi<x>_adds',' <x> to include path'#010+
   '**2Fl<x>_adds <x> to library path'#010+
   '**2FL<x>_uses <x> as dynamic linker'#010+
   '**2Fo<x>_adds <x> to object path'#010+
   '**2Fr<x>_load error message file <x>'#010+
   '**2Fu<x>_adds <x> to unit path'#010+
-  '**2FU<x>_set unit output path t','o <x>, overrides -FE'#010+
+  '**2FU<x>_set unit output path to <x>, overrides ','-FE'#010+
   '*g1g_generate debugger information:'#010+
   '*g2gc_generate checks for pointers'#010+
   '*g2gd_use dbx'#010+
   '*g2gg_use gsym'#010+
   '*g2gh_use heap trace unit (for memory leak debugging)'#010+
   '*g2gl_use line info unit to show more info for backtraces'#010+
-  '*g2gt_t','rash local variables (to detect uninitialized uses)'#010+
+  '*g2gt_trash local variab','les (to detect uninitialized uses)'#010+
   '*g2gv_generates programs traceable with valgrind'#010+
   '*g2gw_generate dwarf debugging info'#010+
   '**1i_information'#010+
   '**2iD_return compiler date'#010+
   '**2iV_return compiler version'#010+
-  '**2iW_return full compiler ve','rsion'#010+
-  '**2iSO_return compiler OS'#010+
+  '**2iW_return full compiler version'#010+
+  '**2iSO_retu','rn compiler OS'#010+
   '**2iSP_return compiler processor'#010+
   '**2iTO_return target OS'#010+
   '**2iTP_return target processor'#010+
@@ -900,62 +900,62 @@ const msgtxt : array[0..000177,1..240] of char=(
   '**1k<x>_Pass <x> to the linker'#010+
   '**1l_write logo'#010+
   '**1M<x>_set language mode to <x>'#010+
-  '**2Mfpc','_free pascal dialect (default)'#010+
+  '**2Mfpc_free pascal dial','ect (default)'#010+
   '**2Mobjfpc_switch some Delphi 2 extensions on'#010+
   '**2Mdelphi_tries to be Delphi compatible'#010+
   '**2Mtp_tries to be TP/BP 7.0 compatible'#010+
   '**2Mgpc_tries to be gpc compatible'#010+
-  '**2Mmacpas_tries to be compatible to the macint','osh pascal dialects'#010+
+  '**2Mmacpas_tries to be compatible to the macintosh pascal dialec','ts'#010+
   '**1n_don'#039't read the default config file'#010+
   '**1N<x>_node tree optimizations'#010+
   '**2Nu_unroll loops'#010+
   '**1o<x>_change the name of the executable produced to <x>'#010+
   '**1O<x>_optimizations:'#010+
   '**2O-_disable optimizations'#010+
-  '**2O1_level 1 optimi','zations (quick and debugger friendly)'#010+
+  '**2O1_level 1 optimizations (quick an','d debugger friendly)'#010+
   '**2O2_level 2 optimizations (-O1 + quick optimizations)'#010+
   '**2O3_level 3 optimizations (-O2 + slow optimizations)'#010+
   '**2Oa<x>=<y>_set alignment'#010+
-  '**2Oo[NO]<x>_enable or disable optimizations, see fpc -i for pos','sibl'+
-  'e values'#010+
-  '**2Op<x>_set target cpu for optimizing, see fpc -i for possible values'+
-  #010+
+  '**2Oo[NO]<x>_enable or disable optimizations, see fpc -i for possible '+
+  'values'#010+
+  '**2O','p<x>_set target cpu for optimizing, see fpc -i for possible valu'+
+  'es'#010+
   '**2Os_generate smaller code'#010+
   '**1pg_generate profile code for gprof (defines FPC_PROFILE)'#010+
   '**1R<x>_assembler reading style:'#010+
   '**2Rdefault_use default assembler'#010+
-  '3','*2Ratt_read AT&T style assembler'#010+
+  '3*2Ratt_read AT&T ','style assembler'#010+
   '3*2Rintel_read Intel style assembler'#010+
   '6*2RMOT_read motorola style assembler'#010+
   '**1S<x>_syntax options:'#010+
   '**2S2_same as -Mobjfpc'#010+
   '**2Sc_supports operators like C (*=,+=,/= and -=)'#010+
   '**2Sa_include assertion code.'#010+
-  '**2Sd','_same as -Mdelphi'#010+
+  '**2Sd_same as -Mdelphi',#010+
   '**2Se<x>_error options. <x> is a combination of the following:'#010+
   '**3*_<n> : compiler stops after the <n> errors (default is 1)'#010+
   '**3*_w : compiler stops also after warnings'#010+
   '**3*_n : compiler stops also after notes'#010+
-  '**3*_h : com','piler stops also after hints'#010+
+  '**3*_h : compiler stops also ','after hints'#010+
   '**2Sg_allow LABEL and GOTO'#010+
   '**2Sh_Use ansistrings'#010+
   '**2Si_support C++ styled INLINE'#010+
   '**2Sk_load fpcylix unit'#010+
   '**2SI<x>_set interface style to <x>'#010+
   '**3SIcom_COM compatible interface (default)'#010+
-  '**3SIcorba_CORBA compatibl','e interface'#010+
-  '**2Sm_support macros like C (global)'#010+
+  '**3SIcorba_CORBA compatible interface'#010+
+  '**2Sm','_support macros like C (global)'#010+
   '**2So_same as -Mtp'#010+
   '**2Sp_same as -Mgpc'#010+
   '**2Ss_constructor name must be init (destructor must be done)'#010+
   '**2St_allow static keyword in objects'#010+
-  '**2Sx_enable exception keywords (default in Delphi/O','bjFPC modes)'#010+
-  '**1s_don'#039't call assembler and linker'#010+
+  '**2Sx_enable exception keywords (default in Delphi/ObjFPC modes)'#010+
+  '**1s','_don'#039't call assembler and linker'#010+
   '**2sh_Generate script to link on host'#010+
   '**2st_Generate script to link on target'#010+
   '**2sr_Skip register allocation phase (use with -alr)'#010+
   '**1T<x>_Target operating system:'#010+
-  '3*2Temx_OS/2 via EMX (incl','uding EMX/RSX extender)'#010+
+  '3*2Temx_OS/2 via EMX (including EMX/RSX ext','ender)'#010+
   '3*2Tfreebsd_FreeBSD'#010+
   '3*2Tgo32v2_Version 2 of DJ Delorie DOS extender'#010+
   '3*2Tlinux_Linux'#010+
@@ -963,8 +963,8 @@ const msgtxt : array[0..000177,1..240] of char=(
   '3*2Tnetware_Novell Netware Module (clib)'#010+
   '3*2Tnetwlibc_Novell Netware Module (libc)'#010+
   '3*2Topenbsd_OpenBSD'#010+
-  '3*2Tos2_OS/','2 / eComStation'#010+
-  '3*2Tsunos_SunOS/Solaris'#010+
+  '3*2Tos2_OS/2 / eComStation'#010+
+  '3','*2Tsunos_SunOS/Solaris'#010+
   '3*2Twatcom_Watcom compatible DOS extender'#010+
   '3*2Twdosx_WDOSX DOS extender'#010+
   '3*2Twin32_Windows 32 Bit'#010+
@@ -972,8 +972,8 @@ const msgtxt : array[0..000177,1..240] of char=(
   '4*2Tlinux_Linux'#010+
   '6*2Tamiga_Commodore Amiga'#010+
   '6*2Tatari_Atari ST/STe/TT'#010+
-  '6*2Tlinux_Linux','/m68k'#010+
-  '6*2Tmacos_Macintosh m68k (not supported)'#010+
+  '6*2Tlinux_Linux/m68k'#010+
+  '6*2Tmacos_M','acintosh m68k (not supported)'#010+
   '6*2Tpalmos_PalmOS'#010+
   'A*2Tlinux_Linux'#010+
   'A*2Twince_Windows CE'#010+
@@ -981,54 +981,55 @@ const msgtxt : array[0..000177,1..240] of char=(
   'P*2Tdarwin_Darwin and MacOS X on PowerPC'#010+
   'P*2Tlinux_Linux on PowerPC'#010+
   'P*2Tmacos_MacOS (classic) on PowerPC'#010+
-  'P*2T','morphos_MorphOS'#010+
-  'S*2Tlinux_Linux'#010+
+  'P*2Tmorphos_MorphOS'#010+
+  'S','*2Tlinux_Linux'#010+
   '**1u<x>_undefines the symbol <x>'#010+
   '**1U_unit options:'#010+
   '**2Un_don'#039't check the unit name'#010+
   '**2Ur_generate release unit files'#010+
   '**2Us_compile a system unit'#010+
-  '**1v<x>_Be verbose. <x> is a combination of the following lett','ers:'#010+
-  '**2*_e : Show errors (default)       0 : Show nothing (except errors)'#010+
+  '**1v<x>_Be verbose. <x> is a combination of the following letters:'#010+
+  '**2*_e : Sho','w errors (default)       0 : Show nothing (except errors'+
+  ')'#010+
   '**2*_w : Show warnings               u : Show unit info'#010+
   '**2*_n : Show notes                  t : Show tried/used files'#010+
-  '**2*_h : Show hints                  c : Show ','conditionals'#010+
-  '**2*_i : Show general info           d : Show debug info'#010+
+  '**2*_h : Show hints                  c : Show conditionals'#010+
+  '**2*','_i : Show general info           d : Show debug info'#010+
   '**2*_l : Show linenumbers            r : Rhide/GCC compatibility mode'#010+
   '**2*_a : Show everything             x : Executable info (Win32 only)'#010+
-  '**2*_b : Write file names mess','ages with full path'#010+
+  '**2*_b : Write file names messages with full pa','th'#010+
   '**2*_v : write fpcdebug.txt with     p : Write tree.log with parse tre'+
   'e'#010+
   '**2*_    lots of debugging info'#010+
   '3*1W<x>_Win32-like target options'#010+
   '3*2WB_Create a relocatable image'#010+
-  '3*2WB<x>_Set Image base to Hexadecimal <x> value'#010,
-  '3*2WC_Specify console type application'#010+
+  '3*2WB<x>_Set Image base to Hexadecimal <x> value'#010+
+  '3*2WC_Specify con','sole type application'#010+
   '3*2WD_Use DEFFILE to export functions of DLL or EXE'#010+
   '3*2WF_Specify full-screen type application (OS/2 only)'#010+
   '3*2WG_Specify graphic type application'#010+
-  '3*2WN_Do not generate relocation code (necessary for de','bugging)'#010+
-  '3*2WR_Generate relocation code'#010+
+  '3*2WN_Do not generate relocation code (necessary for debugging)'#010+
+  '3*2WR_Ge','nerate relocation code'#010+
   'P*2WC_Specify console type application (MacOS only)'#010+
   'P*2WG_Specify graphic type application (MacOS only)'#010+
   'P*2WT_Specify tool type application (MPW tool, MacOS only)'#010+
   '**1X_executable options:'#010+
-  '**2Xc_pass -','-shared to the linker (Unix only)'#010+
+  '**2Xc_pass --shared to the li','nker (Unix only)'#010+
   '**2Xd_don'#039't use standard library search path (needed for cross com'+
   'pile)'#010+
   '**2Xe_use external linker'#010+
   '**2XD_try to link units dynamic          (defines FPC_LINK_DYNAMIC)'#010+
   '**2Xi_use internal linker'#010+
-  '**2Xm_generate',' link map'#010+
-  '**2XM<x>_set the name of the '#039'main'#039' program routine (default i'+
-  's '#039'main'#039')'#010+
+  '**2Xm_generate link map'#010+
+  '**2XM<x','>_set the name of the '#039'main'#039' program routine (default'+
+  ' is '#039'main'#039')'#010+
   '**2XP<x>_prepend the binutils names with the prefix <x>'#010+
   '**2Xr<x>_set library search path to <x> (needed for cross compile)'#010+
-  '**2Xs_strip all symbols from execut','able'#010+
-  '**2XS_try to link units static (default) (defines FPC_LINK_STATIC)'#010+
+  '**2Xs_strip all symbols from executable'#010+
+  '**2XS_try to',' link units static (default) (defines FPC_LINK_STATIC)'#010+
   '**2Xt_link with static libraries (-static is passed to linker)'#010+
   '**2XX_try to link units smart            (defines FPC_LINK_SMART)'#010+
   '**1*_'#010+
   '**1?_shows this help'#010+
-  '**1h_shows t','his help without waiting'#000
+  '**1h_shows this help without ','waiting'#000
 );

compiler/nld.pas

@@ -585,7 +585,7 @@ implementation
         { assignments to formaldefs and open arrays aren't allowed }
         if (left.resultdef.typ=formaldef) or
            is_open_array(left.resultdef) then
-          CGMessage(type_e_operator_not_allowed);
+          CGMessage(type_e_assignment_not_allowed);
 
         { test if node can be assigned, properties are allowed }
         valid_for_assignment(left,true);