pierre cc537a2e76 Try to avoid uncorrect optimization 10 yıl önce
..
aasmcpu.pas 4e2fb9d28b * MIPS: fixed O_MOVE_SOURCE and O_MOVE_DEST constants (they were swapped, amazing that it ever worked with such a mistake). 11 yıl önce
aoptcpu.pas cc537a2e76 Try to avoid uncorrect optimization 10 yıl önce
aoptcpub.pas 93e0dd9c2f * Patch from Fuxin Zhang: other mips and mipsel CPUs changes 13 yıl önce
aoptcpud.pas 0c8546f94c * more MIPS code of David Zhang integrated 16 yıl önce
cgcpu.pas 06ee500352 * MIPS: improved code generation in make_simple_ref 11 yıl önce
cpubase.pas c260879439 * MIPS: updated registers, dropped special registers not recognized by GAS (actually, "pc" is recognized, but it is used only for MIPS16 mode, so it is easier to add back if/when this mode is supported), added FPU condition code registers ($fcc0..$fcc7). 11 yıl önce
cpuelf.pas a4053370fc * ELF linker: track relocation style (REL or RELA) of each input section and use it instead of global default on MIPS targets. This fixes internal linking of tests/test/units/system/tres*.pp. 10 yıl önce
cpugas.pas b46ce6b70e * Fixed condition to output div/divu having R0 as first operand as non-macros. 10 yıl önce
cpuinfo.pas 5c67fcc43f + change always floating point divisions into multiplications if they are a power of two, 10 yıl önce
cpunode.pas b57c95043f + support overriding tdef/tsym methods with target-specific functionality: 11 yıl önce
cpupara.pas c3350d13f9 * MIPS: floating point parameters on stack should be loaded to/from FPU registers directly, without using temp. 12 yıl önce
cpupi.pas 96dd464bf2 * Moved fixup_jmps to target-specific classes for powerpc,powerpc64 and MIPS, cleaned out remaining $ifdef's. A slight functionality change is that fixup_jmps is now called before adding the procedure end symbol, not after, but that should not matter. 11 yıl önce
cputarg.pas b2b26f84cf * partially merged the mips-embedded branch of Michael Ring: 11 yıl önce
hlcgcpu.pas b2b26f84cf * partially merged the mips-embedded branch of Michael Ring: 11 yıl önce
itcpugas.pas 3d2a27c66c * fix fpu register type 13 yıl önce
mipsreg.dat e367ccc0ee * MIPS: changed superregister number for $fcc0..$fcc7 to start from 32, so that range 0..31 can be used without translating into symbolic names. 11 yıl önce
ncpuadd.pas 57094d495b + MIPS: implement inline full 64-bit multiplication, for cases when overflow checking is off and CPU is set to mips32r2. 10 yıl önce
ncpucall.pas 87684e1cf1 * MIPS: clean up 11 yıl önce
ncpucnv.pas 5655baa23a * MIPS: optimized conversion of unsigned 32-bit integers to float, now uses one integer register instead of two and does not generate redundant move. 11 yıl önce
ncpuinln.pas 4065483a50 * completed thlcgobj.location_force_fpureg(), use it everywhere and removed 11 yıl önce
ncpuld.pas 4b820a1ca5 - Removed tcgloadnode.generate_picvaraccess, it is never used and is not necessary because PIC stuff is handled at lower levels. 12 yıl önce
ncpumat.pas cd27d64cd5 + Support (as target-independent as possible) optimization of division by constants: 11 yıl önce
ncpuset.pas e163a2c813 * MIPS and SPARC: determine whether case expression is in range using a single unsigned comparison (like it is done on other targets). 11 yıl önce
opcode.inc 4e7c908b0d + MIPS: added movn and movz instructions. 11 yıl önce
racpugas.pas e367ccc0ee * MIPS: changed superregister number for $fcc0..$fcc7 to start from 32, so that range 0..31 can be used without translating into symbolic names. 11 yıl önce
rgcpu.pas 3b06465322 + MIPS: support replacement spilling for mov.s, mov.d and (partially) mtc1 instructions. 11 yıl önce
rmipscon.inc e367ccc0ee * MIPS: changed superregister number for $fcc0..$fcc7 to start from 32, so that range 0..31 can be used without translating into symbolic names. 11 yıl önce
rmipsdwf.inc c260879439 * MIPS: updated registers, dropped special registers not recognized by GAS (actually, "pc" is recognized, but it is used only for MIPS16 mode, so it is easier to add back if/when this mode is supported), added FPU condition code registers ($fcc0..$fcc7). 11 yıl önce
rmipsgas.inc c260879439 * MIPS: updated registers, dropped special registers not recognized by GAS (actually, "pc" is recognized, but it is used only for MIPS16 mode, so it is easier to add back if/when this mode is supported), added FPU condition code registers ($fcc0..$fcc7). 11 yıl önce
rmipsgri.inc c260879439 * MIPS: updated registers, dropped special registers not recognized by GAS (actually, "pc" is recognized, but it is used only for MIPS16 mode, so it is easier to add back if/when this mode is supported), added FPU condition code registers ($fcc0..$fcc7). 11 yıl önce
rmipsgss.inc f58fcdf401 + basic mips stuff 20 yıl önce
rmipsnor.inc c260879439 * MIPS: updated registers, dropped special registers not recognized by GAS (actually, "pc" is recognized, but it is used only for MIPS16 mode, so it is easier to add back if/when this mode is supported), added FPU condition code registers ($fcc0..$fcc7). 11 yıl önce
rmipsnum.inc c260879439 * MIPS: updated registers, dropped special registers not recognized by GAS (actually, "pc" is recognized, but it is used only for MIPS16 mode, so it is easier to add back if/when this mode is supported), added FPU condition code registers ($fcc0..$fcc7). 11 yıl önce
rmipsrni.inc c260879439 * MIPS: updated registers, dropped special registers not recognized by GAS (actually, "pc" is recognized, but it is used only for MIPS16 mode, so it is easier to add back if/when this mode is supported), added FPU condition code registers ($fcc0..$fcc7). 11 yıl önce
rmipssri.inc c260879439 * MIPS: updated registers, dropped special registers not recognized by GAS (actually, "pc" is recognized, but it is used only for MIPS16 mode, so it is easier to add back if/when this mode is supported), added FPU condition code registers ($fcc0..$fcc7). 11 yıl önce
rmipssta.inc c260879439 * MIPS: updated registers, dropped special registers not recognized by GAS (actually, "pc" is recognized, but it is used only for MIPS16 mode, so it is easier to add back if/when this mode is supported), added FPU condition code registers ($fcc0..$fcc7). 11 yıl önce
rmipsstd.inc c260879439 * MIPS: updated registers, dropped special registers not recognized by GAS (actually, "pc" is recognized, but it is used only for MIPS16 mode, so it is easier to add back if/when this mode is supported), added FPU condition code registers ($fcc0..$fcc7). 11 yıl önce
rmipssup.inc e367ccc0ee * MIPS: changed superregister number for $fcc0..$fcc7 to start from 32, so that range 0..31 can be used without translating into symbolic names. 11 yıl önce
strinst.inc 4e7c908b0d + MIPS: added movn and movz instructions. 11 yıl önce
symcpu.pas 02495c17bd Fix a typo. The CPU specific version of "ttypesym" should be called "tcputypesym" and not "tcpuypesym". 11 yıl önce