fpc/compiler/verbose.pas

{
    Copyright (c) 1998-2002 by Peter Vreman

    This unit handles the verbose management

    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.

 ****************************************************************************
}
unit verbose;

{$i fpcdefs.inc}

interface

    uses
{$IFNDEF USE_FAKE_SYSUTILS}
      sysutils,
{$ELSE}
      fksysutl,
{$ENDIF}
      cutils,
      globtype,finput,
      cmsgs;

{$ifndef EXTERN_MSG}
  {$i msgtxt.inc}
{$endif}

{$i msgidx.inc}

    var
      msg : pmessage;

    type
      tmsgqueueevent = procedure(const s:TMsgStr;v,w:longint) of object;

    const
      msgfilename : string = '';

    procedure SetRedirectFile(const fn:string);
    function  SetVerbosity(const s:TCmdStr):boolean;
    procedure PrepareReport;

    function  CheckVerbosity(v:longint):boolean;
    function  SetMessageVerbosity(v:longint;state:tmsgstate):boolean;
    procedure RestoreLocalVerbosity(pstate : pmessagestaterecord);
    procedure FreeLocalVerbosity(var fstate : pmessagestaterecord);

    function ChangeMessageVerbosity(s: ansistring; var i: integer;state:tmsgstate): boolean;
    procedure ShowStatus;
    function  ErrorCount:longint;
    procedure SetErrorFlags(const s:string);
    procedure GenerateError;
    procedure Internalerror(i:longint);noreturn;
    procedure Comment(l:longint;s:ansistring);
    function  MessageStr(w:longint):TMsgStr;
    procedure Message(w:longint;onqueue:tmsgqueueevent=nil);
    procedure Message1(w:longint;const s1:TMsgStr;onqueue:tmsgqueueevent=nil);
    procedure Message2(w:longint;const s1,s2:TMsgStr;onqueue:tmsgqueueevent=nil);
    procedure Message3(w:longint;const s1,s2,s3:TMsgStr;onqueue:tmsgqueueevent=nil);
    procedure Message4(w:longint;const s1,s2,s3,s4:TMsgStr;onqueue:tmsgqueueevent=nil);
    procedure MessagePos(const pos:tfileposinfo;w:longint;onqueue:tmsgqueueevent=nil);
    procedure MessagePos1(const pos:tfileposinfo;w:longint;const s1:TMsgStr;onqueue:tmsgqueueevent=nil);
    procedure MessagePos2(const pos:tfileposinfo;w:longint;const s1,s2:TMsgStr;onqueue:tmsgqueueevent=nil);
    procedure MessagePos3(const pos:tfileposinfo;w:longint;const s1,s2,s3:TMsgStr;onqueue:tmsgqueueevent=nil);
    procedure MessagePos4(const pos:tfileposinfo;w:longint;const s1,s2,s3,s4:TMsgStr;onqueue:tmsgqueueevent=nil);

    { message calls with codegenerror support }
    procedure cgmessage(t : longint);
    procedure cgmessage1(t : longint;const s : TMsgStr);
    procedure cgmessage2(t : longint;const s1,s2 : TMsgStr);
    procedure cgmessage3(t : longint;const s1,s2,s3 : TMsgStr);
    procedure CGMessagePos(const pos:tfileposinfo;t:longint);
    procedure CGMessagePos1(const pos:tfileposinfo;t:longint;const s1:TMsgStr);
    procedure CGMessagePos2(const pos:tfileposinfo;t:longint;const s1,s2:TMsgStr);
    procedure CGMessagePos3(const pos:tfileposinfo;t:longint;const s1,s2,s3:TMsgStr);

    procedure FlushOutput;

    procedure InitVerbose;
    procedure DoneVerbose;


    const
      printnodespacing = '   ';
    var
      { indention used when writing a node tree to the screen }
      printnodeindention : string;


     { Node dumping support functions }
     procedure printnodeindent; inline;
     procedure printnodeunindent; inline;
{$ifdef DEBUG_NODE_XML}
     function SanitiseXMLString(const S: ansistring): ansistring;
     function WritePointer(const P: Pointer): ansistring;
     function WriteConstPUInt(const P: TConstPtrUInt): ansistring;
     function WriteGUID(const GUID: TGUID): ansistring;
{$endif DEBUG_NODE_XML}

implementation

    uses
      comphook,fmodule,constexp,globals,cfileutl,switches,cclasses;

{****************************************************************************
                       Extra Handlers for default compiler
****************************************************************************}

    procedure DoneRedirectFile;
      begin
        if status.use_redir then
         begin
           close(status.redirfile);
           status.use_redir:=false;
         end;
        if status.use_bugreport then
         begin
           close(status.reportbugfile);
           status.use_bugreport:=false;
         end;
      end;


    procedure SetRedirectFile(const fn:string);
      begin
        { close old redirection file because FileRedirection is handled in both passes }
        if status.use_redir then
          close(status.redirfile);

        assign(status.redirfile,fn);
      {$push}{$I-}
        append(status.redirfile);
        if ioresult <> 0 then
          begin
            assign(status.redirfile,fn);
            rewrite(status.redirfile);
          end;
      {$pop}
        status.use_redir:=(ioresult=0);
      end;


    procedure PrepareReport;
      var
        fn : string;
      begin
        if status.use_bugreport then
         exit;
        fn:='fpcdebug.txt';
        assign(status.reportbugfile,fn);
        {$push}{$I-}
         append(status.reportbugfile);
         if ioresult <> 0 then
          rewrite(status.reportbugfile);
        {$pop}
        status.use_bugreport:=(ioresult=0);
        if status.use_bugreport then
         writeln(status.reportbugfile,'FPC bug report file');
      end;

    procedure RestoreLocalVerbosity(pstate : pmessagestaterecord);
      var
        msgset : thashset;
        msgfound : boolean;
      begin
        msg^.ResetStates;
        msgset:=thashset.create(10,false,false);
        while assigned(pstate) do
          begin
            msgfound:=false;
            { only apply the newest message state }
            if not assigned(msgset.findoradd(@pstate^.value,sizeof(pstate^.value),msgfound)) or
                not msgfound then
              SetMessageVerbosity(pstate^.value,pstate^.state);
            pstate:=pstate^.next;
          end;
        msgset.free;
      end;

    procedure FreeLocalVerbosity(var fstate : pmessagestaterecord);
    var pstate : pmessagestaterecord;
      begin
        pstate:=unaligned(fstate);
        while assigned(pstate) do
          begin
            unaligned(fstate):=pstate^.next;
            dispose(pstate);
            pstate:=unaligned(fstate);
          end;
      end;

    function ChangeMessageVerbosity(s: ansistring; var i : integer;state:tmsgstate): boolean;
      var
        tok  : ansistring;
        msgnr, code : longint;
      begin
        { delete everything up to and including 'm' }
        delete(s,1,i);
        { the rest of the string must be message numbers }
        inc(i,length(s)+1);
        result:=false;
        repeat
          tok:=GetToken(s,',');
          if (tok='') then
            break;
          val(tok, msgnr, code);
          if (code<>0) then
            exit;
          if not msg^.valid(msgnr) then
            exit
          else
            recordpendingmessagestate(msgnr, state);
        until false;
        result:=true;
      end;

    function SetMessageVerbosity(v:longint;state:tmsgstate):boolean;
      begin
        result:=msg^.setverbosity(v,state);
      end;

    function CheckVerbosity(v:longint):boolean;
      begin
        result:=do_checkverbosity(v);
      end;


    function SetVerbosity(const s:TCmdStr):boolean;
      const
        message_verbosity:array[boolean] of tmsgstate=(ms_off_global,ms_on_global);
      var
        m : Longint;
        i : Integer;
        inverse : boolean;
        c : char;
      begin
        Setverbosity:=false;
        val(s,m,i);
        if (i=0) and (s<>'') then
         status.verbosity:=m
        else
         begin
           i:=1;
           while i<=length(s) do
             begin
                c:=upcase(s[i]);
                inverse:=false;
                { on/off ? }
                if (i<length(s)) then
                 case s[i+1] of
                  '-' : begin
                          inc(i);
                          inverse:=true;
                        end;
                  '+' : inc(i);
                 end;
                { handle switch }
                case c of
                { Special cases }
                 '0' : status.verbosity:=V_Default;
                 'A' : status.verbosity:=V_All;
                 'B' : begin
                          if inverse then
                            status.print_source_path:=false
                          else
                            status.print_source_path:=true;
                       end;
                 'M' : if not ChangeMessageVerbosity(s,i,message_verbosity[inverse]) then
                         begin
                           result:=false;
                           exit
                         end;
                 'P' : begin
                         if inverse then
                          paraprintnodetree:=0
                         else
                          paraprintnodetree:=1;
                       end;
                 'Q' : begin
                          if inverse then
                            status.showmsgnrs:=false
                          else
                            status.showmsgnrs:=true;
                       end;
                 'R' : begin
                          if inverse then
                            begin
                               status.use_gccoutput:=false;
                               status.use_stderr:=false;
                            end
                          else
                            begin
                               status.use_gccoutput:=true;
                               status.use_stderr:=true;
                            end;
                       end;
                 'V' : PrepareReport;
                 'Z' : begin
                          if inverse then
                            status.use_stderr:=false
                          else
                            status.use_stderr:=true;
                       end;
                { Normal cases - do an or }
                 'C' : if inverse then
                         status.verbosity:=status.verbosity and (not V_Conditional)
                       else
                         status.verbosity:=status.verbosity or V_Conditional;
                 'D' : if inverse then
                         status.verbosity:=status.verbosity and (not V_Debug)
                       else
                         status.verbosity:=status.verbosity or V_Debug;
                 'E' : if inverse then
                         status.verbosity:=status.verbosity and (not V_Error)
                       else
                         status.verbosity:=status.verbosity or V_Error;
                 'H' : if inverse then
                         status.verbosity:=status.verbosity and (not V_Hint)
                       else
                         status.verbosity:=status.verbosity or V_Hint;
                 'I' : if inverse then
                         status.verbosity:=status.verbosity and (not V_Info)
                       else
                         status.verbosity:=status.verbosity or V_Info;
                 'J' : if inverse then
                         status.verbosity:=status.verbosity and (not V_Parallel)
                       else
                         status.verbosity:=status.verbosity or V_Parallel;
                 'L' : if inverse then
                         status.verbosity:=status.verbosity and (not V_Status)
                       else
                         status.verbosity:=status.verbosity or V_Status;
                 'N' : if inverse then
                         status.verbosity:=status.verbosity and (not V_Note)
                       else
                         status.verbosity:=status.verbosity or V_Note;
                 'S' : if inverse then
                         status.verbosity:=status.verbosity and (not V_TimeStamps)
                       else
                         status.verbosity:=status.verbosity or V_TimeStamps;
                 'T' : if inverse then
                         status.verbosity:=status.verbosity and (not V_Tried)
                       else
                         status.verbosity:=status.verbosity or V_Tried;
                 'U' : if inverse then
                         status.verbosity:=status.verbosity and (not V_Used)
                       else
                         status.verbosity:=status.verbosity or V_Used;
                 'W' : if inverse then
                         status.verbosity:=status.verbosity and (not V_Warning)
                       else
                         status.verbosity:=status.verbosity or V_Warning;
                 'X' : if inverse then
                         status.verbosity:=status.verbosity and (not V_Executable)
                       else
                         status.verbosity:=status.verbosity or V_Executable;
                 end;
                inc(i);
             end;
           end;
        if status.verbosity=0 then
         status.verbosity:=V_Default;
        setverbosity:=true;
      end;


    procedure Loadprefixes;

        function loadprefix(w:longint):string;
        var
          s : string;
          idx : longint;
        begin
          s:=msg^.get(w,[]);
          idx:=pos('_',s);
          if idx>0 then
           Loadprefix:=Copy(s,idx+1,255)
          else
           Loadprefix:=s;
        end;

      begin
      { Load the prefixes }
        fatalstr:=Loadprefix(general_i_fatal);
        errorstr:=Loadprefix(general_i_error);
        warningstr:=Loadprefix(general_i_warning);
        notestr:=Loadprefix(general_i_note);
        hintstr:=Loadprefix(general_i_hint);
      end;


    procedure LoadMsgFile(const fn:string);
      begin
        { reload the internal messages if not already loaded }
{$ifndef EXTERN_MSG}
        if not msg^.msgintern then
         msg^.LoadIntern(@msgtxt,msgtxtsize,msgtxt_codepage);
{$endif}
        if not msg^.LoadExtern(fn) then
         begin
{$ifdef EXTERN_MSG}
           writeln('Fatal: Cannot find error message file.');
           halt(3);
{$else}
           msg^.LoadIntern(@msgtxt,msgtxtsize,msgtxt_codepage);
{$endif}
         end;
        { reload the prefixes using the new messages }
        Loadprefixes;
      end;


    procedure MaybeLoadMessageFile;
      begin
        { Load new message file }
        if (msgfilename<>'')  then
         begin
           LoadMsgFile(msgfilename);
           msgfilename:='';
         end;
      end;


    var
      lastfileidx,
      lastmoduleidx : longint;


    Procedure UpdateStatus;
      var
        module : tmodule;
      begin
      { fix status }
        status.currentline:=current_filepos.line;
        status.currentcolumn:=current_filepos.column;
        if (current_filepos.moduleindex <> lastmoduleidx) or
           (current_filepos.fileindex <> lastfileidx) then
        begin
          module:=get_module(current_filepos.moduleindex);
          if assigned(module) and assigned(module.sourcefiles) then
            begin
              { update status record }
              status.currentmodule:=module.modulename^;
              status.currentsourceppufilename:=module.ppufilename;
              status.currentmodulestate:=ModuleStateStr[module.state];
              status.currentsource:=module.sourcefiles.get_file_name(current_filepos.fileindex);
              status.currentsourcepath:=module.sourcefiles.get_file_path(current_filepos.fileindex);
              status.sources_avail:=module.sources_avail;
              { if currentsourcepath is relative, make it absolute }
              if not path_absolute(status.currentsourcepath) then
                status.currentsourcepath:=GetCurrentDir+status.currentsourcepath;

              { update lastfileidx only if name known PM }
              if status.currentsource<>'' then
                lastfileidx:=current_filepos.fileindex
              else
                lastfileidx:=0;

              lastmoduleidx:=module.unit_index;
            end;
        end;
      end;


    procedure ShowStatus;
      begin
        UpdateStatus;
        if do_status() then
          raise ECompilerAbort.Create;
      end;


    function ErrorCount:longint;
      begin
        ErrorCount:=status.errorcount;
      end;


    procedure SetErrorFlags(const s:string);
      var
        code : integer;
        i,j,l : longint;
      begin
      { empty string means error count = 1 for backward compatibility (PFV) }
        if s='' then
         begin
           status.maxerrorcount:=1;
           exit;
         end;
        i:=0;
        while (i<length(s)) do
         begin
           inc(i);
           case s[i] of
             '0'..'9' :
                begin
                  j:=i;
                  while (j<=length(s)) and (s[j] in ['0'..'9']) do
                   inc(j);
                  val(copy(s,i,j-i),l,code);
                  if code<>0 then
                   l:=1;
                  status.maxerrorcount:=l;
                  i:=j-1;
                end;
              'w','W' :
                begin
                  if (i<length(s)) and (s[i+1]='-') then
                    begin
                      inc(i);
                      status.errorwarning:=false;
                    end
                  else
                    begin
                      status.errorwarning:=true;
                      { Enable writing of warnings, to avoid getting errors without any message }
                      status.verbosity:=status.verbosity or V_Warning;
                    end;
                end;
              'n','N' :
                begin
                  if (i<length(s)) and (s[i+1]='-') then
                    begin
                      inc(i);
                      status.errornote:=false;
                    end
                  else
                    begin
                      status.errornote:=true;
                      { Enable writing of notes, to avoid getting errors without any message }
                      status.verbosity:=status.verbosity or V_Note;
                    end;

                end;
              'h','H' :
                begin
                  if (i<length(s)) and (s[i+1]='-') then
                    begin
                      inc(i);
                      status.errorhint:=false;
                    end
                  else
                    begin
                      status.errorhint:=true;
                      { Enable writing of hints, to avoid getting errors without any message }
                      status.verbosity:=status.verbosity or V_Hint;
                    end;
                end;
           end;
         end;
      end;


    procedure GenerateError;
      begin
        inc(status.errorcount);
      end;


    procedure internalerror(i : longint);noreturn;
      procedure doraise;
        begin
          raise ECompilerAbort.Create;
        end;
      begin
        UpdateStatus;
        do_internalerror(i);
        GenerateError;
        doraise;
      end;

    procedure Comment(l:longint;s:ansistring);
      var
        dostop : boolean;
      begin
        dostop:=((l and V_Fatal)<>0);
        if ((l and V_Error)<>0) or
           ((l and V_Fatal)<>0) or
           (status.errorwarning and ((l and V_Warning)<>0)) or
           (status.errornote and ((l and V_Note)<>0)) or
           (status.errorhint and ((l and V_Hint)<>0)) then
         GenerateError
        else
         if l and V_Warning <> 0 then
          inc(status.countWarnings)
         else
          if l and V_Note <> 0 then
           inc(status.countNotes)
          else
           if l and V_Hint <> 0 then
            inc(status.countHints);
      { check verbosity level }
        if not CheckVerbosity(l) then
          exit;
        if (l and V_LineInfoMask)<>0 then
          l:=l or V_LineInfo;
      { Create status info }
        UpdateStatus;
      { Fix replacements }
        DefaultReplacements(s,false);
      { show comment }
        if do_comment(l,s) or dostop then
          raise ECompilerAbort.Create;
        if (status.errorcount>=status.maxerrorcount) and not status.skip_error then
         begin
           Message1(unit_f_errors_in_unit,tostr(status.errorcount));
           status.skip_error:=true;
           raise ECompilerAbort.Create;
         end;
      end;

    function GetMessageState(m:longint):tmsgstate;
      var
        i: integer;
      begin
        i:=m div 1000;
        { get the default state }
        Result:=msg^.msgstates[i]^[m mod 1000];

        { and search at the current unit settings }
        { todo }
      end;

    Procedure Msg2Comment(s:ansistring;w:longint;onqueue:tmsgqueueevent);
      var
        idx,i,v : longint;
        dostop  : boolean;
        doqueue : boolean;
        st      : tmsgstate;
        ch      : char;
      begin
      {Reset}
        dostop:=false;
        doqueue:=false;
        v:=0;
      {Parse options}
        idx:=pos('_',s);
        if idx=0 then
         v:=V_None
        else
         if (idx >= 1) And (idx <= 5) then
          begin
            for i:=1 to idx do
             begin
               ch:=upcase(s[i]);
               case ch of
                'F' :
                  begin
                    v:=v or V_Fatal;
                    GenerateError;
                    dostop:=true;
                  end;
                'E','W','N','H':
                  begin
                    if ch='E' then
                      st:=ms_error
                    else
                      st:=GetMessageState(w);
                    { We only want to know about local value }
                    st:= tmsgstate(ord(st) and ms_local_mask);
                    if st=ms_error then
                      begin
                        v:=v or V_Error;
                        GenerateError;
                      end
                    else if st<>ms_off then
                      case ch of
                       'W':
                         begin
                           v:=v or V_Warning;
                           if CheckVerbosity(V_Warning) then
                             if status.errorwarning then
                              GenerateError
                             else
                              inc(status.countWarnings);
                         end;
                       'N' :
                         begin
                           v:=v or V_Note;
                           if CheckVerbosity(V_Note) then
                             if status.errornote then
                              GenerateError
                             else
                              inc(status.countNotes);
                         end;
                       'H' :
                         begin
                           v:=v or V_Hint;
                           if CheckVerbosity(V_Hint) then
                             if status.errorhint then
                              GenerateError
                             else
                              inc(status.countHints);
                         end;
                      end;
                  end;
                'O' :
                  v:=v or V_Normal;
                'I' :
                  v:=v or V_Info;
                'L' :
                  v:=v or V_LineInfo;
                'U' :
                  v:=v or V_Used;
                'T' :
                  v:=v or V_Tried;
                'C' :
                  v:=v or V_Conditional;
                'D' :
                  v:=v or V_Debug;
                'X' :
                  v:=v or V_Executable;
                'S' :
                  dostop:=true;
                '_' : ;
               end;
             end;
          end;
        Delete(s,1,idx);
      { check verbosity level }
        if not CheckVerbosity(v) then
          begin
            doqueue := onqueue <> nil;
            if not doqueue then
              exit;
          end;
        if (v and V_LineInfoMask)<>0 then
          v:=v or V_LineInfo;
      { fix status }
        UpdateStatus;
      { Fix replacements }
        DefaultReplacements(s,false);
        if status.showmsgnrs and ((v and V_Normal)=0) then
          s:='('+tostr(w)+') '+s;
        if doqueue then
          begin
            onqueue(s,v,w);
            exit;
          end;
      { show comment }
        if do_comment(v,s) or dostop then
          raise ECompilerAbort.Create;
        if (status.errorcount>=status.maxerrorcount) and not status.skip_error then
          begin
            Message1(unit_f_errors_in_unit,tostr(status.errorcount));
            status.skip_error:=true;
            raise ECompilerAbort.Create;
          end;
      end;


    function  MessageStr(w:longint):TMsgStr;
      begin
        MaybeLoadMessageFile;
        MessageStr:=msg^.Get(w,[]);
      end;


    procedure Message(w:longint;onqueue:tmsgqueueevent=nil);
      begin
        MaybeLoadMessageFile;
        Msg2Comment(msg^.Get(w,[]),w,onqueue);
      end;


    procedure Message1(w:longint;const s1:TMsgStr;onqueue:tmsgqueueevent=nil);

      begin
        MaybeLoadMessageFile;
        Msg2Comment(msg^.Get(w,[s1]),w,onqueue);
      end;


    procedure Message2(w:longint;const s1,s2:TMsgStr;onqueue:tmsgqueueevent=nil);
      begin
        MaybeLoadMessageFile;
        Msg2Comment(msg^.Get(w,[s1,s2]),w,onqueue);
      end;


    procedure Message3(w:longint;const s1,s2,s3:TMsgStr;onqueue:tmsgqueueevent=nil);
      begin
        MaybeLoadMessageFile;
        Msg2Comment(msg^.Get(w,[s1,s2,s3]),w,onqueue);
      end;


    procedure Message4(w:longint;const s1,s2,s3,s4:TMsgStr;onqueue:tmsgqueueevent=nil);
      begin
        MaybeLoadMessageFile;
        Msg2Comment(msg^.Get(w,[s1,s2,s3,s4]),w,onqueue);
      end;


    procedure MessagePos(const pos:tfileposinfo;w:longint;onqueue:tmsgqueueevent=nil);
      var
        oldpos : tfileposinfo;
      begin
        oldpos:=current_filepos;
        current_filepos:=pos;
        MaybeLoadMessageFile;
        Msg2Comment(msg^.Get(w,[]),w,onqueue);
        current_filepos:=oldpos;
      end;


    procedure MessagePos1(const pos:tfileposinfo;w:longint;const s1:TMsgStr;onqueue:tmsgqueueevent=nil);
      var
        oldpos : tfileposinfo;
      begin
        oldpos:=current_filepos;
        current_filepos:=pos;
        MaybeLoadMessageFile;
        Msg2Comment(msg^.Get(w,[s1]),w,onqueue);
        current_filepos:=oldpos;
      end;


    procedure MessagePos2(const pos:tfileposinfo;w:longint;const s1,s2:TMsgStr;onqueue:tmsgqueueevent=nil);
      var
        oldpos : tfileposinfo;
      begin
        oldpos:=current_filepos;
        current_filepos:=pos;
        MaybeLoadMessageFile;
        Msg2Comment(msg^.Get(w,[s1,s2]),w,onqueue);
        current_filepos:=oldpos;
      end;


    procedure MessagePos3(const pos:tfileposinfo;w:longint;const s1,s2,s3:TMsgStr;onqueue:tmsgqueueevent=nil);
      var
        oldpos : tfileposinfo;
      begin
        oldpos:=current_filepos;
        current_filepos:=pos;
        MaybeLoadMessageFile;
        Msg2Comment(msg^.Get(w,[s1,s2,s3]),w,onqueue);
        current_filepos:=oldpos;
      end;


    procedure MessagePos4(const pos:tfileposinfo;w:longint;const s1,s2,s3,s4:TMsgStr;onqueue:tmsgqueueevent=nil);
      var
        oldpos : tfileposinfo;
      begin
        oldpos:=current_filepos;
        current_filepos:=pos;
        MaybeLoadMessageFile;
        Msg2Comment(msg^.Get(w,[s1,s2,s3,s4]),w,onqueue);
        current_filepos:=oldpos;
      end;


{*****************************************************************************
            override the message calls to set codegenerror
*****************************************************************************}

    procedure cgmessage(t : longint);
      var
         olderrorcount : longint;
      begin
         if not(codegenerror) then
           begin
              olderrorcount:=Errorcount;
              verbose.Message(t);
              codegenerror:=olderrorcount<>Errorcount;
           end;
      end;

    procedure cgmessage1(t : longint;const s : TMsgStr);
      var
         olderrorcount : longint;
      begin
         if not(codegenerror) then
           begin
              olderrorcount:=Errorcount;
              verbose.Message1(t,s);
              codegenerror:=olderrorcount<>Errorcount;
           end;
      end;

    procedure cgmessage2(t : longint;const s1,s2 : TMsgStr);
      var
         olderrorcount : longint;
      begin
         if not(codegenerror) then
           begin
              olderrorcount:=Errorcount;
              verbose.Message2(t,s1,s2);
              codegenerror:=olderrorcount<>Errorcount;
           end;
      end;

    procedure cgmessage3(t : longint;const s1,s2,s3 : TMsgStr);
      var
         olderrorcount : longint;
      begin
         if not(codegenerror) then
           begin
              olderrorcount:=Errorcount;
              verbose.Message3(t,s1,s2,s3);
              codegenerror:=olderrorcount<>Errorcount;
           end;
      end;


    procedure cgmessagepos(const pos:tfileposinfo;t : longint);
      var
         olderrorcount : longint;
      begin
         if not(codegenerror) then
           begin
              olderrorcount:=Errorcount;
              verbose.MessagePos(pos,t);
              codegenerror:=olderrorcount<>Errorcount;
           end;
      end;

    procedure cgmessagepos1(const pos:tfileposinfo;t : longint;const s1 : TMsgStr);
      var
         olderrorcount : longint;
      begin
         if not(codegenerror) then
           begin
              olderrorcount:=Errorcount;
              verbose.MessagePos1(pos,t,s1);
              codegenerror:=olderrorcount<>Errorcount;
           end;
      end;

    procedure cgmessagepos2(const pos:tfileposinfo;t : longint;const s1,s2 : TMsgStr);
      var
         olderrorcount : longint;
      begin
         if not(codegenerror) then
           begin
              olderrorcount:=Errorcount;
              verbose.MessagePos2(pos,t,s1,s2);
              codegenerror:=olderrorcount<>Errorcount;
           end;
      end;

    procedure cgmessagepos3(const pos:tfileposinfo;t : longint;const s1,s2,s3 : TMsgStr);
      var
         olderrorcount : longint;
      begin
         if not(codegenerror) then
           begin
              olderrorcount:=Errorcount;
              verbose.MessagePos3(pos,t,s1,s2,s3);
              codegenerror:=olderrorcount<>Errorcount;
           end;
      end;


    procedure FlushOutput;
      begin
        if not (Status.Use_StdErr) then (* StdErr is flushed after every line *)
          begin
            if Status.Use_Redir then
              Flush(Status.RedirFile)
            else
              Flush(Output);
          end;
      end;


{*****************************************************************************
                                Initialization
*****************************************************************************}

    procedure InitVerbose;
      begin
      { Init }
        msg:=new(pmessage,Init(20,msgidxmax));
        if msg=nil then
         begin
           writeln('Fatal: MsgIdx Wrong');
           halt(3);
         end;
{$ifndef EXTERN_MSG}
        msg^.LoadIntern(@msgtxt,msgtxtsize,msgtxt_codepage);
{$else EXTERN_MSG}
        LoadMsgFile(exepath+'errore.msg');
{$endif EXTERN_MSG}
        FillChar(Status,sizeof(TCompilerStatus),0);
        status.verbosity:=V_Default;
        Status.MaxErrorCount:=50;
        Status.codesize:=aword(-1);
        Status.datasize:=aword(-1);
        Loadprefixes;
        lastfileidx:=-1;
        lastmoduleidx:=-1;
        status.currentmodule:='';
        status.currentsourceppufilename:='';
        status.currentsource:='';
        status.currentsourcepath:='';
        { Register internalerrorproc for cutils/cclasses }
        internalerrorproc:=@internalerror;
      end;


    procedure DoneVerbose;
      begin
        if assigned(msg) then
         begin
           dispose(msg,Done);
           msg:=nil;
         end;
        DoneRedirectFile;
      end;


    procedure printnodeindent; inline;
      begin
        printnodeindention:=printnodeindention+printnodespacing;
      end;


    procedure printnodeunindent; inline;
      begin
        delete(printnodeindention,1,length(printnodespacing));
      end;

{$ifdef DEBUG_NODE_XML}
    function WritePointer(const P: Pointer): ansistring;
      begin
        case PtrUInt(P) of
          0:
            WritePointer := 'nil';
          1..$FFFF:
            WritePointer := '$' + hexstr(PtrUInt(P), 4);
    {$if sizeof(Pointer) >= 4}
          $10000..$FFFFFFFF:
            WritePointer := '$' + hexstr(PtrUInt(P), 8);
    {$ifend sizeof(Pointer) >= 4}
    {$if sizeof(Pointer) > 4}
          else
            WritePointer := '$' + hexstr(PtrUInt(P), 2*sizeof(Pointer));
    {$ifend sizeof(Pointer) > 4}
        end;
      end;


    function WriteConstPUInt(const P: TConstPtrUInt): ansistring;
      begin
        case P of
          0:
            WriteConstPUInt := 'nil';
          1..$FFFF:
            WriteConstPUInt := '$' + hexstr(P, 4);
    {$if sizeof(TConstPtrUInt) >= 4}
          $10000..$FFFFFFFF:
            WriteConstPUInt := '$' + hexstr(P, 8);
    {$ifend sizeof(TConstPtrUInt) >= 4}
    {$if sizeof(TConstPtrUInt) > 4}
          else
            WriteConstPUInt := '$' + hexstr(P, 2*sizeof(TConstPtrUInt));
    {$endif sizeof(TConstPtrUInt) > 4}
        end;
      end;


    function WriteGUID(const GUID: TGUID): ansistring;
      var
        i: Integer;
      begin
        Result := '{' + hexstr(GUID.D1, 8) + '-' + hexstr(GUID.D2, 4) + '-' + hexstr(GUID.D3, 4) + '-';
        for i := 0 to 7 do
          Result := Result + hexstr(GUID.D4[i], 2);

        Result := Result + '}';
      end;


    function SanitiseXMLString(const S: ansistring): ansistring;
      var
        X, UTF8Len, UTF8Char, CurrentChar: Integer;
        needs_quoting, in_quotes, add_end_quote: Boolean;
        DoASCII: Boolean;

        { Write the given byte as #xxx }
        procedure EncodeControlChar(Value: Byte);
          begin
            if X = Length(Result) then
              add_end_quote := False;

            Delete(Result, X, 1);
            if in_quotes then
              begin
                Insert('#' + tostr(Value) + '''', Result, X);

                { If the entire string consists of control characters, it
                  doesn't need quoting, so only set the flag here }
                needs_quoting := True;

                in_quotes := False;
              end
            else
              Insert('#' + tostr(Value), Result, X);
          end;

        { Write the given byte as either a plain character or an XML keyword }
        procedure EncodeStandardChar(Value: Byte);
          begin
            if not in_quotes then
              begin
                in_quotes := True;
                if (X < Length(Result)) then
                  begin
                    needs_quoting := True;
                    Insert('''', Result, X + 1)
                  end;
              end;

            { Check the character for anything that could be mistaken for an XML element }
            case CurrentChar of
              Ord('#'):
                { Required to differentiate '#27' from the escape code #27, for example }
                needs_quoting:=true;

              Ord('<'):
                begin
                  Delete(Result, X, 1);
                  Insert('&lt;', Result, X);
                end;
              Ord('>'):
                begin
                  Delete(Result, X, 1);
                  Insert('&gt;', Result, X);
                end;
              Ord('&'):
                begin
                  Delete(Result, X, 1);
                  Insert('&amp;', Result, X);
                end;
              Ord('"'):
                begin
                  needs_quoting := True;
                  Delete(Result, X, 1);
                  Insert('&quot;', Result, X);
                end;
              Ord(''''):
                begin
                  needs_quoting:=true;
                  { Simply double it like in pascal strings }
                  Insert('''', Result, X);
                end;
              else
                { Do nothing };
            end;
          end;

        { Convert character between $80 and $FF to UTF-8 }
        procedure EncodeExtendedChar(Value: Byte);
          begin
            if not in_quotes then
              begin
                in_quotes := True;
                if (X < Length(Result)) then
                  begin
                    needs_quoting := True;
                    Insert('''', Result, X + 1)
                  end;
              end;

            case Value of
              $80..$BF: { Add $C2 before the value }
                Insert(#$C2, Result, X);
              $C0..$FF: { Zero the $40 bit and add $C3 before the value }
                begin
                  Result[X] := Char(Byte(Result[X]) and $BF);
                  Insert(#$C3, Result, X);
                end;
              else
                { Previous conditions should prevent this procedure from being
                  called if Value < $80 }
                InternalError(2019061901);
            end;
          end;

      begin
        needs_quoting := False;
        Result := S;

        { Gets set to True if an invalid UTF-8 sequence is found }
        DoASCII := False;

        { By setting in_quotes to false here, we can exclude the single
          quotation marks surrounding the string if it doesn't contain any
          control characters, or consists entirely of control characters. }
        in_quotes := False;

        add_end_quote := True;

        X := Length(Result);
        while X > 0 do
          begin
            CurrentChar := Ord(Result[X]);

            { Control characters and extended characters need special handling }
            case CurrentChar of
              $00..$1F, $7F:
                EncodeControlChar(CurrentChar);

              $20..$7E:
                EncodeStandardChar(CurrentChar);

              { UTF-8 continuation byte }
              $80..$BF:
                begin
                  if not in_quotes then
                    begin
                      in_quotes := True;
                      if (X < Length(Result)) then
                        begin
                          needs_quoting := True;
                          Insert('''', Result, X + 1)
                        end;
                    end;

                  UTF8Char := CurrentChar and $3F; { The data bits of the continuation byte }
                  UTF8Len := 1; { This variable actually holds 1 less than the length }

                  { By setting DoASCII to true, it marks the string as 'invalid UTF-8'
                    automatically if it reaches the beginning of the string unexpectedly }
                  DoASCII := True;

                  Dec(X);
                  while X > 0 do
                    begin
                      CurrentChar := Ord(Result[X]);

                      case CurrentChar of
                        { A standard character here is invalid UTF-8 }
                        $00..$7F:
                          Break;

                        { Another continuation byte }
                        $80..$BF:
                          begin
                            UTF8Char := UTF8Char or ((CurrentChar and $3F) shl (6 * UTF8Len));

                            dec(X);
                            Inc(UTF8Len);
                            if UTF8Len >= 4 then
                              { Sequence too long }
                              Break;
                          end;

                        { Lead byte for 2-byte sequences }
                        $C2..$DF:
                          begin
                            if UTF8Len <> 1 then Break;

                            UTF8Char := UTF8Char or ((CurrentChar and $1F) shl 6);

                            { Check to see if the code is in range and not part of an 'overlong' sequence }
                            case UTF8Char of
                              $0080..$07FF:
                                DoASCII := False;
                              else
                                { Do nothing - DoASCII is already true }
                            end;
                            Break;
                          end;

                        { Lead byte for 3-byte sequences }
                        $E0..$EF:
                          begin
                            if UTF8Len <> 2 then Break;

                            UTF8Char := UTF8Char or ((CurrentChar and $0F) shl 12);

                            { Check to see if the code is in range and not part of an 'overlong' sequence }
                            case UTF8Char of
                              $0800..$D7FF, $E000..$FFFF: { $D800..$DFFF is reserved and hence invalid }
                                DoASCII := False;
                              else
                                { Do nothing - DoASCII is already true }
                            end;
                            Break;
                          end;

                        { Lead byte for 4-byte sequences }
                        $F0..$F4:
                          begin
                            if UTF8Len <> 3 then Break;

                            UTF8Char := UTF8Char or ((CurrentChar and $07) shl 18);

                            { Check to see if the code is in range and not part of an 'overlong' sequence }
                            case UTF8Char of
                              $010000..$10FFFF:
                                DoASCII := False;
                              else
                                { Do nothing - DoASCII is already true }
                            end;
                            Break;
                          end;

                        { Invalid character }
                        else
                          Break;
                      end;
                    end;

                  if DoASCII then
                    Break;

                  { If all is fine, we don't need to encode any more characters }
                end;

              { Invalid UTF-8 bytes and lead bytes without continuation bytes }
              $C0..$FF:
                begin
                  DoASCII := True;
                  Break;
                end;
            end;

            Dec(X);
          end;

        { UTF-8 failed, so encode the string as plain ASCII }
        if DoASCII then
          begin
            { Reset the flags and Result }
            needs_quoting := False;
            Result := S;
            in_quotes := False;
            add_end_quote := True;

            for X := Length(Result) downto 1 do
              begin
                CurrentChar := Ord(Result[X]);

                { Control characters and extended characters need special handling }
                case CurrentChar of
                  $00..$1F, $7F:
                    EncodeControlChar(CurrentChar);

                  $20..$7E:
                    EncodeStandardChar(CurrentChar);

                  { Extended characters }
                  else
                    EncodeExtendedChar(CurrentChar);

                end;
              end;
          end;

        if needs_quoting then
          begin
            if in_quotes then
              Result := '''' + Result;

            if add_end_quote then
              Result := Result + '''';
          end;
      end;
{$endif DEBUG_NODE_XML}


finalization
  { Be sure to close the redirect files to flush all data }
  DoneRedirectFile;
end.