opts386.pas 6.8 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216
  1. {
  2. $Id$
  3. Copyright (c) 1993-98 by Florian Klaempfl, Pierre Muller
  4. interprets the commandline options which are i386 specific
  5. This program is free software; you can redistribute it and/or modify
  6. it under the terms of the GNU General Public License as published by
  7. the Free Software Foundation; either version 2 of the License, or
  8. (at your option) any later version.
  9. This program is distributed in the hope that it will be useful,
  10. but WITHOUT ANY WARRANTY; without even the implied warranty of
  11. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  12. GNU General Public License for more details.
  13. You should have received a copy of the GNU General Public License
  14. along with this program; if not, write to the Free Software
  15. Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  16. ****************************************************************************
  17. }
  18. unit opts386;
  19. interface
  20. uses
  21. options;
  22. type
  23. poption386=^toption386;
  24. toption386=object(toption)
  25. procedure interpret_proc_specific_options(const opt:string);virtual;
  26. end;
  27. implementation
  28. uses
  29. systems,globals;
  30. procedure toption386.interpret_proc_specific_options(const opt:string);
  31. var
  32. j : longint;
  33. More : string;
  34. begin
  35. More:=Upper(copy(opt,3,length(opt)-2));
  36. case opt[2] of
  37. 'A' : begin
  38. if set_string_asm(More) then
  39. initoutputformat:=target_asm.id
  40. else
  41. IllegalPara(opt);
  42. end;
  43. 'O' : begin
  44. for j:=3 to length(opt) do
  45. case opt[j] of
  46. '-' : initglobalswitches:=initglobalswitches-[cs_optimize,cs_maxoptimize,cs_littlesize];
  47. 'a' : initglobalswitches:=initglobalswitches+[cs_optimize];
  48. 'g' : initglobalswitches:=initglobalswitches+[cs_littlesize];
  49. 'G' : initglobalswitches:=initglobalswitches-[cs_littlesize];
  50. 'x' : initglobalswitches:=initglobalswitches+[cs_optimize,cs_maxoptimize];
  51. 'z' : initglobalswitches:=initglobalswitches+[cs_optimize,cs_uncertainopts];
  52. '2' : initoptprocessor:=pentium2;
  53. '3' : initoptprocessor:=int386;
  54. '4' : initoptprocessor:=int486;
  55. '5' : initoptprocessor:=pentium;
  56. '6' : initoptprocessor:=pentiumpro;
  57. '7' : initoptprocessor:=cx6x86;
  58. '8' : initoptprocessor:=amdk6
  59. else IllegalPara(opt);
  60. end;
  61. end;
  62. 'R' : begin
  63. if More='ATT' then
  64. initasmmode:=I386_ATT
  65. else
  66. if More='INTEL' then
  67. initasmmode:=I386_INTEL
  68. else
  69. if More='DIRECT' then
  70. initasmmode:=I386_DIRECT
  71. else
  72. IllegalPara(opt);
  73. end;
  74. else
  75. IllegalPara(opt);
  76. end;
  77. end;
  78. end.
  79. {
  80. $Log$
  81. Revision 1.9 1998-08-10 14:50:04 peter
  82. + localswitches, moduleswitches, globalswitches splitting
  83. Revision 1.8 1998/06/16 08:56:22 peter
  84. + targetcpu
  85. * cleaner pmodules for newppu
  86. Revision 1.7 1998/05/30 14:31:05 peter
  87. + $ASMMODE
  88. Revision 1.6 1998/05/28 17:26:48 peter
  89. * fixed -R switch, it didn't work after my previous akt/init patch
  90. * fixed bugs 110,130,136
  91. Revision 1.5 1998/05/23 01:21:14 peter
  92. + aktasmmode, aktoptprocessor, aktoutputformat
  93. + smartlink per module $SMARTLINK-/+ (like MMX) and moved to aktswitches
  94. + $LIBNAME to set the library name where the unit will be put in
  95. * splitted cgi386 a bit (codeseg to large for bp7)
  96. * nasm, tasm works again. nasm moved to ag386nsm.pas
  97. Revision 1.4 1998/05/10 12:07:15 jonas
  98. + switches for 6x86 and k6 optimizations
  99. Revision 1.3 1998/04/29 10:33:55 pierre
  100. + added some code for ansistring (not complete nor working yet)
  101. * corrected operator overloading
  102. * corrected nasm output
  103. + started inline procedures
  104. + added starstarn : use ** for exponentiation (^ gave problems)
  105. + started UseTokenInfo cond to get accurate positions
  106. Revision 1.1.1.1 1998/03/25 11:18:14 root
  107. * Restored version
  108. Revision 1.17 1998/03/10 01:17:21 peter
  109. * all files have the same header
  110. * messages are fully implemented, EXTDEBUG uses Comment()
  111. + AG... files for the Assembler generation
  112. Revision 1.16 1998/03/06 01:09:00 peter
  113. * removed the conflicts that had occured
  114. Revision 1.15 1998/03/06 00:52:30 peter
  115. * replaced all old messages from errore.msg, only ExtDebug and some
  116. Comment() calls are left
  117. * fixed options.pas
  118. Revision 1.14 1998/03/05 22:41:52 florian
  119. + missing constructor to options object added
  120. Revision 1.13 1998/03/05 02:44:14 peter
  121. * options cleanup and use of .msg file
  122. Revision 1.12 1998/03/04 17:33:47 michael
  123. + Changed ifdef FPK to ifdef FPC
  124. Revision 1.11 1998/03/02 21:21:39 jonas
  125. + added support for uncertain optimizations
  126. Revision 1.10 1998/03/02 01:48:47 peter
  127. * renamed target_DOS to target_GO32V1
  128. + new verbose system, merged old errors and verbose units into one new
  129. verbose.pas, so errors.pas is obsolete
  130. Revision 1.9 1998/02/22 23:03:20 peter
  131. * renamed msource->mainsource and name->unitname
  132. * optimized filename handling, filename is not seperate anymore with
  133. path+name+ext, this saves stackspace and a lot of fsplit()'s
  134. * recompiling of some units in libraries fixed
  135. * shared libraries are working again
  136. + $LINKLIB <lib> to support automatic linking to libraries
  137. + libraries are saved/read from the ppufile, also allows more libraries
  138. per ppufile
  139. Revision 1.8 1998/02/13 10:35:12 daniel
  140. * Made Motorola version compilable.
  141. * Fixed optimizer
  142. Revision 1.7 1998/02/12 11:50:15 daniel
  143. Yes! Finally! After three retries, my patch!
  144. Changes:
  145. Complete rewrite of psub.pas.
  146. Added support for DLL's.
  147. Compiler requires less memory.
  148. Platform units for each platform.
  149. Revision 1.6 1998/02/08 23:56:55 peter
  150. + -O- to turn off optimizes
  151. Revision 1.5 1998/01/23 17:12:14 pierre
  152. * added some improvements for as and ld :
  153. - doserror and dosexitcode treated separately
  154. - PATH searched if doserror=2
  155. + start of long and ansi string (far from complete)
  156. in conditionnal UseLongString and UseAnsiString
  157. * options.pas cleaned (some variables shifted to globals)gl
  158. Revision 1.4 1998/01/07 00:16:54 michael
  159. Restored released version (plus fixes) as current
  160. Revision 1.2 1997/12/15 09:11:29 florian
  161. + again opts386.pas commited (there was an error)
  162. Revision 1.1.1.1 1997/11/27 08:32:57 michael
  163. FPC Compiler CVS start
  164. Pre-CVS log:
  165. CEC Carl-Eric Codere
  166. FK Florian Klaempfl
  167. PM Pierre Muller
  168. + feature added
  169. - removed
  170. * bug fixed or changed
  171. History:
  172. 8th october 1997:
  173. * started from options.pas (FK)
  174. 23th november 1997:
  175. + added -R option for different assembler reading style (PM)
  176. }