node.pas 33 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586878889909192939495969798991001011021031041051061071081091101111121131141151161171181191201211221231241251261271281291301311321331341351361371381391401411421431441451461471481491501511521531541551561571581591601611621631641651661671681691701711721731741751761771781791801811821831841851861871881891901911921931941951961971981992002012022032042052062072082092102112122132142152162172182192202212222232242252262272282292302312322332342352362372382392402412422432442452462472482492502512522532542552562572582592602612622632642652662672682692702712722732742752762772782792802812822832842852862872882892902912922932942952962972982993003013023033043053063073083093103113123133143153163173183193203213223233243253263273283293303313323333343353363373383393403413423433443453463473483493503513523533543553563573583593603613623633643653663673683693703713723733743753763773783793803813823833843853863873883893903913923933943953963973983994004014024034044054064074084094104114124134144154164174184194204214224234244254264274284294304314324334344354364374384394404414424434444454464474484494504514524534544554564574584594604614624634644654664674684694704714724734744754764774784794804814824834844854864874884894904914924934944954964974984995005015025035045055065075085095105115125135145155165175185195205215225235245255265275285295305315325335345355365375385395405415425435445455465475485495505515525535545555565575585595605615625635645655665675685695705715725735745755765775785795805815825835845855865875885895905915925935945955965975985996006016026036046056066076086096106116126136146156166176186196206216226236246256266276286296306316326336346356366376386396406416426436446456466476486496506516526536546556566576586596606616626636646656666676686696706716726736746756766776786796806816826836846856866876886896906916926936946956966976986997007017027037047057067077087097107117127137147157167177187197207217227237247257267277287297307317327337347357367377387397407417427437447457467477487497507517527537547557567577587597607617627637647657667677687697707717727737747757767777787797807817827837847857867877887897907917927937947957967977987998008018028038048058068078088098108118128138148158168178188198208218228238248258268278288298308318328338348358368378388398408418428438448458468478488498508518528538548558568578588598608618628638648658668678688698708718728738748758768778788798808818828838848858868878888898908918928938948958968978988999009019029039049059069079089099109119129139149159169179189199209219229239249259269279289299309319329339349359369379389399409419429439449459469479489499509519529539549559569579589599609619629639649659669679689699709719729739749759769779789799809819829839849859869879889899909919929939949959969979989991000100110021003100410051006100710081009101010111012101310141015101610171018101910201021102210231024102510261027102810291030103110321033103410351036103710381039104010411042104310441045104610471048104910501051105210531054105510561057105810591060106110621063106410651066106710681069107010711072107310741075107610771078107910801081108210831084108510861087108810891090109110921093109410951096109710981099110011011102110311041105110611071108110911101111111211131114111511161117111811191120
  1. {
  2. $Id$
  3. Copyright (c) 2000-2002 by Florian Klaempfl
  4. Basic node handling
  5. This program is free software; you can redistribute it and/or modify
  6. it under the terms of the GNU General Public License as published by
  7. the Free Software Foundation; either version 2 of the License, or
  8. (at your option) any later version.
  9. This program is distributed in the hope that it will be useful,
  10. but WITHOUT ANY WARRANTY; without even the implied warranty of
  11. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  12. GNU General Public License for more details.
  13. You should have received a copy of the GNU General Public License
  14. along with this program; if not, write to the Free Software
  15. Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  16. ****************************************************************************
  17. }
  18. unit node;
  19. {$i fpcdefs.inc}
  20. interface
  21. uses
  22. cclasses,
  23. globtype,globals,
  24. cpubase,
  25. aasmbase,
  26. symtype,symppu;
  27. type
  28. pconstset = ^tconstset;
  29. {$ifdef oldset}
  30. tconstset = array[0..31] of byte;
  31. pconst32bitset = ^tconst32bitset;
  32. tconst32bitset = array[0..7] of longint;
  33. {$else}
  34. tconstset = set of 0..255;
  35. {$endif}
  36. tnodetype = (
  37. emptynode, {No node (returns nil when loading from ppu)}
  38. addn, {Represents the + operator}
  39. muln, {Represents the * operator}
  40. subn, {Represents the - operator}
  41. divn, {Represents the div operator}
  42. symdifn, {Represents the >< operator}
  43. modn, {Represents the mod operator}
  44. assignn, {Represents an assignment}
  45. loadn, {Represents the use of a variabele}
  46. rangen, {Represents a range (i.e. 0..9)}
  47. ltn, {Represents the < operator}
  48. lten, {Represents the <= operator}
  49. gtn, {Represents the > operator}
  50. gten, {Represents the >= operator}
  51. equaln, {Represents the = operator}
  52. unequaln, {Represents the <> operator}
  53. inn, {Represents the in operator}
  54. orn, {Represents the or operator}
  55. xorn, {Represents the xor operator}
  56. shrn, {Represents the shr operator}
  57. shln, {Represents the shl operator}
  58. slashn, {Represents the / operator}
  59. andn, {Represents the and operator}
  60. subscriptn, {Field in a record/object}
  61. derefn, {Dereferences a pointer}
  62. addrn, {Represents the @ operator}
  63. doubleaddrn, {Represents the @@ operator}
  64. ordconstn, {Represents an ordinal value}
  65. typeconvn, {Represents type-conversion/typecast}
  66. calln, {Represents a call node}
  67. callparan, {Represents a parameter}
  68. realconstn, {Represents a real value}
  69. unaryminusn, {Represents a sign change (i.e. -2)}
  70. asmn, {Represents an assembler node }
  71. vecn, {Represents array indexing}
  72. pointerconstn, {Represents a pointer constant}
  73. stringconstn, {Represents a string constant}
  74. funcretn, {Represents the function result var}
  75. selfn, {Represents the self parameter}
  76. notn, {Represents the not operator}
  77. inlinen, {Internal procedures (i.e. writeln)}
  78. niln, {Represents the nil pointer}
  79. errorn, {This part of the tree could not be
  80. parsed because of a compiler error}
  81. typen, {A type name. Used for i.e. typeof(obj)}
  82. hnewn, {The new operation, constructor call}
  83. hdisposen, {The dispose operation with destructor call}
  84. setelementn, {A set element(s) (i.e. [a,b] and also [a..b])}
  85. setconstn, {A set constant (i.e. [1,2])}
  86. blockn, {A block of statements}
  87. statementn, {One statement in a block of nodes}
  88. ifn, {An if statement}
  89. breakn, {A break statement}
  90. continuen, {A continue statement}
  91. whilerepeatn, {A while or repeat statement}
  92. forn, {A for loop}
  93. exitn, {An exit statement}
  94. withn, {A with statement}
  95. casen, {A case statement}
  96. labeln, {A label}
  97. goton, {A goto statement}
  98. tryexceptn, {A try except block}
  99. raisen, {A raise statement}
  100. tryfinallyn, {A try finally statement}
  101. onn, {For an on statement in exception code}
  102. isn, {Represents the is operator}
  103. asn, {Represents the as typecast}
  104. caretn, {Represents the ^ operator}
  105. failn, {Represents the fail statement}
  106. starstarn, {Represents the ** operator exponentiation }
  107. procinlinen, {Procedures that can be inlined }
  108. arrayconstructorn, {Construction node for [...] parsing}
  109. arrayconstructorrangen, {Range element to allow sets in array construction tree}
  110. tempcreaten, { for temps in the result/firstpass }
  111. temprefn, { references to temps }
  112. tempdeleten, { for temps in the result/firstpass }
  113. addoptn, { added for optimizations where we cannot suppress }
  114. nothingn, {NOP, Do nothing}
  115. loadvmtn, {Load the address of the VMT of a class/object}
  116. guidconstn, {A GUID COM Interface constant }
  117. rttin {Rtti information so they can be accessed in result/firstpass}
  118. );
  119. const
  120. nodetype2str : array[tnodetype] of string[20] = (
  121. '<emptynode>',
  122. 'addn',
  123. 'muln',
  124. 'subn',
  125. 'divn',
  126. 'symdifn',
  127. 'modn',
  128. 'assignn',
  129. 'loadn',
  130. 'rangen',
  131. 'ltn',
  132. 'lten',
  133. 'gtn',
  134. 'gten',
  135. 'equaln',
  136. 'unequaln',
  137. 'inn',
  138. 'orn',
  139. 'xorn',
  140. 'shrn',
  141. 'shln',
  142. 'slashn',
  143. 'andn',
  144. 'subscriptn',
  145. 'derefn',
  146. 'addrn',
  147. 'doubleaddrn',
  148. 'ordconstn',
  149. 'typeconvn',
  150. 'calln',
  151. 'callparan',
  152. 'realconstn',
  153. 'unaryminusn',
  154. 'asmn',
  155. 'vecn',
  156. 'pointerconstn',
  157. 'stringconstn',
  158. 'funcretn',
  159. 'selfn',
  160. 'notn',
  161. 'inlinen',
  162. 'niln',
  163. 'errorn',
  164. 'typen',
  165. 'hnewn',
  166. 'hdisposen',
  167. 'setelementn',
  168. 'setconstn',
  169. 'blockn',
  170. 'statementn',
  171. 'ifn',
  172. 'breakn',
  173. 'continuen',
  174. 'whilerepeatn',
  175. 'forn',
  176. 'exitn',
  177. 'withn',
  178. 'casen',
  179. 'labeln',
  180. 'goton',
  181. 'tryexceptn',
  182. 'raisen',
  183. 'tryfinallyn',
  184. 'onn',
  185. 'isn',
  186. 'asn',
  187. 'caretn',
  188. 'failn',
  189. 'starstarn',
  190. 'procinlinen',
  191. 'arrayconstructn',
  192. 'arrayconstructrangen',
  193. 'tempcreaten',
  194. 'temprefn',
  195. 'tempdeleten',
  196. 'addoptn',
  197. 'nothingn',
  198. 'loadvmtn',
  199. 'guidconstn',
  200. 'rttin');
  201. type
  202. { all boolean field of ttree are now collected in flags }
  203. tnodeflags = (
  204. nf_needs_truefalselabel,
  205. nf_swapable, { tbinop operands can be swaped }
  206. nf_swaped, { tbinop operands are swaped }
  207. nf_error,
  208. nf_write, { Node is written to }
  209. { flags used by tcallnode }
  210. nf_return_value_used,
  211. nf_static_call,
  212. nf_anon_inherited,
  213. { flags used by tcallparanode }
  214. nf_varargs_para, { belongs this para to varargs }
  215. { taddrnode }
  216. nf_procvarload,
  217. { tvecnode }
  218. nf_memindex,
  219. nf_memseg,
  220. nf_callunique,
  221. { twithnode }
  222. nf_islocal,
  223. { tloadnode }
  224. nf_absolute,
  225. nf_first,
  226. { tassignmentnode }
  227. nf_concat_string,
  228. { tfuncretnode }
  229. nf_is_first_funcret,
  230. { tarrayconstructnode }
  231. nf_cargs, { 20th }
  232. nf_cargswap,
  233. nf_forcevaria,
  234. nf_novariaallowed,
  235. { ttypeconvnode }
  236. nf_explizit,
  237. { tinlinenode }
  238. nf_inlineconst,
  239. { general }
  240. nf_isproperty,
  241. nf_varstateset,
  242. { taddnode }
  243. nf_use_strconcat
  244. );
  245. tnodeflagset = set of tnodeflags;
  246. const
  247. { contains the flags which must be equal for the equality }
  248. { of nodes }
  249. flagsequal : tnodeflagset = [nf_error,nf_static_call];
  250. type
  251. tnodelist = class
  252. end;
  253. { later (for the newcg) tnode will inherit from tlinkedlist_item }
  254. tnode = class
  255. public
  256. { type of this node }
  257. nodetype : tnodetype;
  258. { type of the current code block, general/const/type }
  259. blocktype : tblock_type;
  260. { the location of the result of this node }
  261. location : tlocation;
  262. { the parent node of this is node }
  263. { this field is set by concattolist }
  264. parent : tnode;
  265. { there are some properties about the node stored }
  266. flags : tnodeflagset;
  267. { the number of registers needed to evalute the node }
  268. registers32,registersfpu : longint; { must be longint !!!! }
  269. {$ifdef SUPPORT_MMX}
  270. registersmmx,registerskni : longint;
  271. {$endif SUPPORT_MMX}
  272. resulttype : ttype;
  273. fileinfo : tfileposinfo;
  274. localswitches : tlocalswitches;
  275. {$ifdef extdebug}
  276. maxfirstpasscount,
  277. firstpasscount : longint;
  278. {$endif extdebug}
  279. constructor create(t:tnodetype);
  280. { this constructor is only for creating copies of class }
  281. { the fields are copied by getcopy }
  282. constructor createforcopy;
  283. constructor ppuload(t:tnodetype;ppufile:tcompilerppufile);virtual;
  284. destructor destroy;override;
  285. procedure ppuwrite(ppufile:tcompilerppufile);virtual;
  286. procedure derefimpl;virtual;
  287. { toggles the flag }
  288. procedure toggleflag(f : tnodeflags);
  289. { the 1.1 code generator may override pass_1 }
  290. { and it need not to implement det_* then }
  291. { 1.1: pass_1 returns a value<>0 if the node has been transformed }
  292. { 2.0: runs det_resulttype and det_temp }
  293. function pass_1 : tnode;virtual;abstract;
  294. { dermines the resulttype of the node }
  295. function det_resulttype : tnode;virtual;abstract;
  296. { dermines the number of necessary temp. locations to evaluate
  297. the node }
  298. {$ifdef state_tracking}
  299. { Does optimizations by keeping track of the variable states
  300. in a procedure }
  301. function track_state_pass(exec_known:boolean):boolean;virtual;
  302. {$endif}
  303. { For a t1:=t2 tree, mark the part of the tree t1 that gets
  304. written to (normally the loadnode) as write access. }
  305. procedure mark_write;virtual;abstract;
  306. procedure det_temp;virtual;abstract;
  307. procedure pass_2;virtual;abstract;
  308. { comparing of nodes }
  309. function isequal(p : tnode) : boolean;
  310. { to implement comparisation, override this method }
  311. function docompare(p : tnode) : boolean;virtual;
  312. { gets a copy of the node }
  313. function getcopy : tnode;virtual;
  314. procedure insertintolist(l : tnodelist);virtual;
  315. {$ifdef EXTDEBUG}
  316. { writes a node for debugging purpose, shouldn't be called }
  317. { direct, because there is no test for nil, use writenode }
  318. { to write a complete tree }
  319. procedure dowrite;
  320. procedure dowritenodetype;virtual;
  321. procedure _dowrite;virtual;
  322. {$endif EXTDEBUG}
  323. procedure concattolist(l : tlinkedlist);virtual;
  324. function ischild(p : tnode) : boolean;virtual;
  325. procedure set_file_line(from : tnode);
  326. procedure set_tree_filepos(const filepos : tfileposinfo);
  327. end;
  328. tnodeclass = class of tnode;
  329. tnodeclassarray = array[tnodetype] of tnodeclass;
  330. { this node is the anchestor for all nodes with at least }
  331. { one child, you have to use it if you want to use }
  332. { true- and falselabel }
  333. punarynode = ^tunarynode;
  334. tunarynode = class(tnode)
  335. left : tnode;
  336. constructor create(t:tnodetype;l : tnode);
  337. constructor ppuload(t:tnodetype;ppufile:tcompilerppufile);override;
  338. destructor destroy;override;
  339. procedure ppuwrite(ppufile:tcompilerppufile);override;
  340. procedure derefimpl;override;
  341. procedure concattolist(l : tlinkedlist);override;
  342. function ischild(p : tnode) : boolean;override;
  343. function docompare(p : tnode) : boolean;override;
  344. function getcopy : tnode;override;
  345. procedure insertintolist(l : tnodelist);override;
  346. procedure left_max;
  347. {$ifdef extdebug}
  348. procedure _dowrite;override;
  349. {$endif extdebug}
  350. end;
  351. pbinarynode = ^tbinarynode;
  352. tbinarynode = class(tunarynode)
  353. right : tnode;
  354. constructor create(t:tnodetype;l,r : tnode);
  355. constructor ppuload(t:tnodetype;ppufile:tcompilerppufile);override;
  356. destructor destroy;override;
  357. procedure ppuwrite(ppufile:tcompilerppufile);override;
  358. procedure derefimpl;override;
  359. procedure concattolist(l : tlinkedlist);override;
  360. function ischild(p : tnode) : boolean;override;
  361. function docompare(p : tnode) : boolean;override;
  362. procedure swapleftright;
  363. function getcopy : tnode;override;
  364. procedure insertintolist(l : tnodelist);override;
  365. procedure left_right_max;
  366. {$ifdef extdebug}
  367. procedure _dowrite;override;
  368. {$endif extdebug}
  369. end;
  370. tbinopnode = class(tbinarynode)
  371. constructor create(t:tnodetype;l,r : tnode);virtual;
  372. function docompare(p : tnode) : boolean;override;
  373. end;
  374. {$ifdef tempregdebug}
  375. type
  376. pptree = ^tnode;
  377. var
  378. curptree: pptree;
  379. {$endif tempregdebug}
  380. var
  381. { array with all class types for tnodes }
  382. nodeclass : tnodeclassarray;
  383. {$ifdef EXTDEBUG}
  384. { indention used when writing the tree to the screen }
  385. writenodeindention : string;
  386. {$endif EXTDEBUG}
  387. function ppuloadnode(ppufile:tcompilerppufile):tnode;
  388. procedure ppuwritenode(ppufile:tcompilerppufile;n:tnode);
  389. {$ifdef EXTDEBUG}
  390. procedure writenode(t:tnode);
  391. {$endif EXTDEBUG}
  392. implementation
  393. uses
  394. cutils,verbose;
  395. const
  396. ppunodemarker = 255;
  397. {****************************************************************************
  398. Helpers
  399. ****************************************************************************}
  400. function ppuloadnode(ppufile:tcompilerppufile):tnode;
  401. var
  402. b : byte;
  403. t : tnodetype;
  404. begin
  405. { marker }
  406. b:=ppufile.getbyte;
  407. if b<>ppunodemarker then
  408. internalerror(200208151);
  409. { load nodetype }
  410. t:=tnodetype(ppufile.getbyte);
  411. if t>high(tnodetype) then
  412. internalerror(200208152);
  413. if t<>emptynode then
  414. begin
  415. if not assigned(nodeclass[t]) then
  416. internalerror(200208153);
  417. //writeln('load: ',nodetype2str[t]);
  418. { generate node of the correct class }
  419. ppuloadnode:=nodeclass[t].ppuload(t,ppufile);
  420. end
  421. else
  422. ppuloadnode:=nil;
  423. end;
  424. procedure ppuwritenode(ppufile:tcompilerppufile;n:tnode);
  425. begin
  426. { marker, read by ppuloadnode }
  427. ppufile.putbyte(ppunodemarker);
  428. { type, read by ppuloadnode }
  429. if assigned(n) then
  430. begin
  431. ppufile.putbyte(byte(n.nodetype));
  432. //writeln('write: ',nodetype2str[n.nodetype]);
  433. n.ppuwrite(ppufile);
  434. end
  435. else
  436. ppufile.putbyte(byte(emptynode));
  437. end;
  438. {$ifdef EXTDEBUG}
  439. procedure writenode(t:tnode);
  440. begin
  441. if assigned(t) then
  442. t.dowrite
  443. else
  444. write(writenodeindention,'nil');
  445. if writenodeindention='' then
  446. writeln;
  447. end;
  448. {$endif EXTDEBUG}
  449. {****************************************************************************
  450. TNODE
  451. ****************************************************************************}
  452. constructor tnode.create(t:tnodetype);
  453. begin
  454. inherited create;
  455. nodetype:=t;
  456. blocktype:=block_type;
  457. { this allows easier error tracing }
  458. location.loc:=LOC_INVALID;
  459. { save local info }
  460. fileinfo:=aktfilepos;
  461. localswitches:=aktlocalswitches;
  462. resulttype.reset;
  463. registers32:=0;
  464. registersfpu:=0;
  465. {$ifdef SUPPORT_MMX}
  466. registersmmx:=0;
  467. {$endif SUPPORT_MMX}
  468. {$ifdef EXTDEBUG}
  469. maxfirstpasscount:=0;
  470. firstpasscount:=0;
  471. {$endif EXTDEBUG}
  472. flags:=[];
  473. end;
  474. constructor tnode.createforcopy;
  475. begin
  476. end;
  477. constructor tnode.ppuload(t:tnodetype;ppufile:tcompilerppufile);
  478. begin
  479. nodetype:=t;
  480. { tnode fields }
  481. blocktype:=tblock_type(ppufile.getbyte);
  482. ppufile.getposinfo(fileinfo);
  483. ppufile.getsmallset(localswitches);
  484. ppufile.gettype(resulttype);
  485. ppufile.getsmallset(flags);
  486. { updated by firstpass }
  487. location.loc:=LOC_INVALID;
  488. registers32:=0;
  489. registersfpu:=0;
  490. {$ifdef SUPPORT_MMX}
  491. registersmmx:=0;
  492. {$endif SUPPORT_MMX}
  493. {$ifdef EXTDEBUG}
  494. maxfirstpasscount:=0;
  495. firstpasscount:=0;
  496. {$endif EXTDEBUG}
  497. end;
  498. procedure tnode.ppuwrite(ppufile:tcompilerppufile);
  499. begin
  500. ppufile.putbyte(byte(block_type));
  501. ppufile.putposinfo(fileinfo);
  502. ppufile.putsmallset(localswitches);
  503. ppufile.puttype(resulttype);
  504. ppufile.putsmallset(flags);
  505. end;
  506. procedure tnode.derefimpl;
  507. begin
  508. resulttype.resolve;
  509. end;
  510. procedure tnode.toggleflag(f : tnodeflags);
  511. begin
  512. if f in flags then
  513. exclude(flags,f)
  514. else
  515. include(flags,f);
  516. end;
  517. destructor tnode.destroy;
  518. begin
  519. {$ifdef EXTDEBUG}
  520. if firstpasscount>maxfirstpasscount then
  521. maxfirstpasscount:=firstpasscount;
  522. {$endif EXTDEBUG}
  523. end;
  524. procedure tnode.concattolist(l : tlinkedlist);
  525. begin
  526. end;
  527. function tnode.ischild(p : tnode) : boolean;
  528. begin
  529. ischild:=false;
  530. end;
  531. {$ifdef EXTDEBUG}
  532. procedure tnode._dowrite;
  533. begin
  534. dowritenodetype;
  535. if assigned(resulttype.def) then
  536. write(',resulttype = "',resulttype.def.gettypename,'"')
  537. else
  538. write(',resulttype = <nil>');
  539. write(',location.loc = ',ord(location.loc));
  540. write(',registersint = ',registers32);
  541. write(',registersfpu = ',registersfpu);
  542. end;
  543. procedure tnode.dowritenodetype;
  544. begin
  545. write(nodetype2str[nodetype]);
  546. end;
  547. procedure tnode.dowrite;
  548. begin
  549. write(writenodeindention,'(');
  550. writenodeindention:=writenodeindention+' ';
  551. _dowrite;
  552. writeln;
  553. delete(writenodeindention,1,4);
  554. write(writenodeindention,')');
  555. end;
  556. {$endif EXTDEBUG}
  557. function tnode.isequal(p : tnode) : boolean;
  558. begin
  559. isequal:=
  560. (not assigned(self) and not assigned(p)) or
  561. (assigned(self) and assigned(p) and
  562. { optimized subclasses have the same nodetype as their }
  563. { superclass (for compatibility), so also check the classtype (JM) }
  564. (p.classtype=classtype) and
  565. (p.nodetype=nodetype) and
  566. (flags*flagsequal=p.flags*flagsequal) and
  567. docompare(p));
  568. end;
  569. {$ifdef state_tracking}
  570. function Tnode.track_state_pass(exec_known:boolean):boolean;
  571. begin
  572. track_state_pass:=false;
  573. end;
  574. {$endif state_tracking}
  575. function tnode.docompare(p : tnode) : boolean;
  576. begin
  577. docompare:=true;
  578. end;
  579. function tnode.getcopy : tnode;
  580. var
  581. p : tnode;
  582. begin
  583. { this is quite tricky because we need a node of the current }
  584. { node type and not one of tnode! }
  585. p:=tnodeclass(classtype).createforcopy;
  586. p.nodetype:=nodetype;
  587. p.location:=location;
  588. p.parent:=parent;
  589. p.flags:=flags;
  590. p.registers32:=registers32;
  591. p.registersfpu:=registersfpu;
  592. {$ifdef SUPPORT_MMX}
  593. p.registersmmx:=registersmmx;
  594. p.registerskni:=registerskni;
  595. {$endif SUPPORT_MMX}
  596. p.resulttype:=resulttype;
  597. p.fileinfo:=fileinfo;
  598. p.localswitches:=localswitches;
  599. {$ifdef extdebug}
  600. p.firstpasscount:=firstpasscount;
  601. {$endif extdebug}
  602. { p.list:=list; }
  603. getcopy:=p;
  604. end;
  605. { procedure tnode.mark_write;
  606. begin
  607. end;}
  608. procedure tnode.insertintolist(l : tnodelist);
  609. begin
  610. end;
  611. procedure tnode.set_file_line(from : tnode);
  612. begin
  613. if assigned(from) then
  614. fileinfo:=from.fileinfo;
  615. end;
  616. procedure tnode.set_tree_filepos(const filepos : tfileposinfo);
  617. begin
  618. fileinfo:=filepos;
  619. end;
  620. {****************************************************************************
  621. TUNARYNODE
  622. ****************************************************************************}
  623. constructor tunarynode.create(t:tnodetype;l : tnode);
  624. begin
  625. inherited create(t);
  626. left:=l;
  627. end;
  628. constructor tunarynode.ppuload(t:tnodetype;ppufile:tcompilerppufile);
  629. begin
  630. inherited ppuload(t,ppufile);
  631. left:=ppuloadnode(ppufile);
  632. end;
  633. destructor tunarynode.destroy;
  634. begin
  635. left.free;
  636. inherited destroy;
  637. end;
  638. procedure tunarynode.ppuwrite(ppufile:tcompilerppufile);
  639. begin
  640. inherited ppuwrite(ppufile);
  641. ppuwritenode(ppufile,left);
  642. end;
  643. procedure tunarynode.derefimpl;
  644. begin
  645. inherited derefimpl;
  646. if assigned(left) then
  647. left.derefimpl;
  648. end;
  649. function tunarynode.docompare(p : tnode) : boolean;
  650. begin
  651. docompare:=(inherited docompare(p) and
  652. ((left=nil) or left.isequal(tunarynode(p).left))
  653. );
  654. end;
  655. function tunarynode.getcopy : tnode;
  656. var
  657. p : tunarynode;
  658. begin
  659. p:=tunarynode(inherited getcopy);
  660. if assigned(left) then
  661. p.left:=left.getcopy
  662. else
  663. p.left:=nil;
  664. getcopy:=p;
  665. end;
  666. procedure tunarynode.insertintolist(l : tnodelist);
  667. begin
  668. end;
  669. {$ifdef extdebug}
  670. procedure tunarynode._dowrite;
  671. begin
  672. inherited _dowrite;
  673. writeln(',');
  674. writenode(left);
  675. end;
  676. {$endif}
  677. procedure tunarynode.left_max;
  678. begin
  679. registers32:=left.registers32;
  680. registersfpu:=left.registersfpu;
  681. {$ifdef SUPPORT_MMX}
  682. registersmmx:=left.registersmmx;
  683. {$endif SUPPORT_MMX}
  684. end;
  685. procedure tunarynode.concattolist(l : tlinkedlist);
  686. begin
  687. left.parent:=self;
  688. left.concattolist(l);
  689. inherited concattolist(l);
  690. end;
  691. function tunarynode.ischild(p : tnode) : boolean;
  692. begin
  693. ischild:=p=left;
  694. end;
  695. {****************************************************************************
  696. TBINARYNODE
  697. ****************************************************************************}
  698. constructor tbinarynode.create(t:tnodetype;l,r : tnode);
  699. begin
  700. inherited create(t,l);
  701. right:=r
  702. end;
  703. constructor tbinarynode.ppuload(t:tnodetype;ppufile:tcompilerppufile);
  704. begin
  705. inherited ppuload(t,ppufile);
  706. right:=ppuloadnode(ppufile);
  707. end;
  708. destructor tbinarynode.destroy;
  709. begin
  710. right.free;
  711. inherited destroy;
  712. end;
  713. procedure tbinarynode.ppuwrite(ppufile:tcompilerppufile);
  714. begin
  715. inherited ppuwrite(ppufile);
  716. ppuwritenode(ppufile,right);
  717. end;
  718. procedure tbinarynode.derefimpl;
  719. begin
  720. inherited derefimpl;
  721. if assigned(right) then
  722. right.derefimpl;
  723. end;
  724. procedure tbinarynode.concattolist(l : tlinkedlist);
  725. begin
  726. { we could change that depending on the number of }
  727. { required registers }
  728. left.parent:=self;
  729. left.concattolist(l);
  730. left.parent:=self;
  731. left.concattolist(l);
  732. inherited concattolist(l);
  733. end;
  734. function tbinarynode.ischild(p : tnode) : boolean;
  735. begin
  736. ischild:=(p=right);
  737. end;
  738. function tbinarynode.docompare(p : tnode) : boolean;
  739. begin
  740. docompare:=(inherited docompare(p) and
  741. ((right=nil) or right.isequal(tbinarynode(p).right))
  742. );
  743. end;
  744. function tbinarynode.getcopy : tnode;
  745. var
  746. p : tbinarynode;
  747. begin
  748. p:=tbinarynode(inherited getcopy);
  749. if assigned(right) then
  750. p.right:=right.getcopy
  751. else
  752. p.right:=nil;
  753. getcopy:=p;
  754. end;
  755. procedure tbinarynode.insertintolist(l : tnodelist);
  756. begin
  757. end;
  758. procedure tbinarynode.swapleftright;
  759. var
  760. swapp : tnode;
  761. begin
  762. swapp:=right;
  763. right:=left;
  764. left:=swapp;
  765. if nf_swaped in flags then
  766. exclude(flags,nf_swaped)
  767. else
  768. include(flags,nf_swaped);
  769. end;
  770. procedure tbinarynode.left_right_max;
  771. begin
  772. if assigned(left) then
  773. begin
  774. if assigned(right) then
  775. begin
  776. registers32:=max(left.registers32,right.registers32);
  777. registersfpu:=max(left.registersfpu,right.registersfpu);
  778. {$ifdef SUPPORT_MMX}
  779. registersmmx:=max(left.registersmmx,right.registersmmx);
  780. {$endif SUPPORT_MMX}
  781. end
  782. else
  783. begin
  784. registers32:=left.registers32;
  785. registersfpu:=left.registersfpu;
  786. {$ifdef SUPPORT_MMX}
  787. registersmmx:=left.registersmmx;
  788. {$endif SUPPORT_MMX}
  789. end;
  790. end;
  791. end;
  792. {$ifdef extdebug}
  793. procedure tbinarynode._dowrite;
  794. begin
  795. inherited _dowrite;
  796. writeln(',');
  797. writenode(right);
  798. end;
  799. {$endif}
  800. {****************************************************************************
  801. TBINOPYNODE
  802. ****************************************************************************}
  803. constructor tbinopnode.create(t:tnodetype;l,r : tnode);
  804. begin
  805. inherited create(t,l,r);
  806. end;
  807. function tbinopnode.docompare(p : tnode) : boolean;
  808. begin
  809. docompare:=(inherited docompare(p)) or
  810. { if that's in the flags, is p then always a tbinopnode (?) (JM) }
  811. ((nf_swapable in flags) and
  812. left.isequal(tbinopnode(p).right) and
  813. right.isequal(tbinopnode(p).left));
  814. end;
  815. end.
  816. {
  817. $Log$
  818. Revision 1.52 2003-04-10 17:57:52 peter
  819. * vs_hidden released
  820. Revision 1.51 2003/03/28 19:16:56 peter
  821. * generic constructor working for i386
  822. * remove fixed self register
  823. * esi added as address register for i386
  824. Revision 1.50 2003/03/17 16:54:41 peter
  825. * support DefaultHandler and anonymous inheritance fixed
  826. for message methods
  827. Revision 1.49 2003/01/04 15:54:03 daniel
  828. * Fixed mark_write for @ operator
  829. (can happen when compiling @procvar:=nil (Delphi mode construction))
  830. Revision 1.48 2003/01/03 21:03:02 peter
  831. * made mark_write dummy instead of abstract
  832. Revision 1.47 2003/01/03 12:15:56 daniel
  833. * Removed ifdefs around notifications
  834. ifdefs around for loop optimizations remain
  835. Revision 1.46 2002/12/26 18:24:33 jonas
  836. * fixed check for whether or not a high parameter was already generated
  837. * no type checking/conversions for invisible parameters
  838. Revision 1.45 2002/11/28 11:17:04 florian
  839. * loop node flags from node flags splitted
  840. Revision 1.44 2002/10/05 00:48:57 peter
  841. * support inherited; support for overload as it is handled by
  842. delphi. This is only for delphi mode as it is working is
  843. undocumented and hard to predict what is done
  844. Revision 1.43 2002/09/07 15:25:03 peter
  845. * old logs removed and tabs fixed
  846. Revision 1.42 2002/09/03 16:26:26 daniel
  847. * Make Tprocdef.defs protected
  848. Revision 1.41 2002/09/01 13:28:38 daniel
  849. - write_access fields removed in favor of a flag
  850. Revision 1.40 2002/09/01 08:01:16 daniel
  851. * Removed sets from Tcallnode.det_resulttype
  852. + Added read/write notifications of variables. These will be usefull
  853. for providing information for several optimizations. For example
  854. the value of the loop variable of a for loop does matter is the
  855. variable is read after the for loop, but if it's no longer used
  856. or written, it doesn't matter and this can be used to optimize
  857. the loop code generation.
  858. Revision 1.39 2002/08/22 11:21:45 florian
  859. + register32 is now written by tnode.dowrite
  860. * fixed write of value of tconstnode
  861. Revision 1.38 2002/08/19 19:36:44 peter
  862. * More fixes for cross unit inlining, all tnodes are now implemented
  863. * Moved pocall_internconst to po_internconst because it is not a
  864. calling type at all and it conflicted when inlining of these small
  865. functions was requested
  866. Revision 1.37 2002/08/18 20:06:24 peter
  867. * inlining is now also allowed in interface
  868. * renamed write/load to ppuwrite/ppuload
  869. * tnode storing in ppu
  870. * nld,ncon,nbas are already updated for storing in ppu
  871. Revision 1.36 2002/08/17 22:09:46 florian
  872. * result type handling in tcgcal.pass_2 overhauled
  873. * better tnode.dowrite
  874. * some ppc stuff fixed
  875. Revision 1.35 2002/08/15 19:10:35 peter
  876. * first things tai,tnode storing in ppu
  877. Revision 1.34 2002/08/09 19:15:41 carl
  878. - removed newcg define
  879. Revision 1.33 2002/07/23 12:34:30 daniel
  880. * Readded old set code. To use it define 'oldset'. Activated by default
  881. for ppc.
  882. Revision 1.32 2002/07/22 11:48:04 daniel
  883. * Sets are now internally sets.
  884. Revision 1.31 2002/07/21 06:58:49 daniel
  885. * Changed booleans into flags
  886. Revision 1.30 2002/07/19 11:41:36 daniel
  887. * State tracker work
  888. * The whilen and repeatn are now completely unified into whilerepeatn. This
  889. allows the state tracker to change while nodes automatically into
  890. repeat nodes.
  891. * Resulttypepass improvements to the notn. 'not not a' is optimized away and
  892. 'not(a>b)' is optimized into 'a<=b'.
  893. * Resulttypepass improvements to the whilerepeatn. 'while not a' is optimized
  894. by removing the notn and later switchting the true and falselabels. The
  895. same is done with 'repeat until not a'.
  896. Revision 1.29 2002/07/14 18:00:44 daniel
  897. + Added the beginning of a state tracker. This will track the values of
  898. variables through procedures and optimize things away.
  899. Revision 1.28 2002/07/01 18:46:24 peter
  900. * internal linker
  901. * reorganized aasm layer
  902. Revision 1.27 2002/05/18 13:34:10 peter
  903. * readded missing revisions
  904. Revision 1.26 2002/05/16 19:46:39 carl
  905. + defines.inc -> fpcdefs.inc to avoid conflicts if compiling by hand
  906. + try to fix temp allocation (still in ifdef)
  907. + generic constructor calls
  908. + start of tassembler / tmodulebase class cleanup
  909. Revision 1.24 2002/04/21 19:02:04 peter
  910. * removed newn and disposen nodes, the code is now directly
  911. inlined from pexpr
  912. * -an option that will write the secondpass nodes to the .s file, this
  913. requires EXTDEBUG define to actually write the info
  914. * fixed various internal errors and crashes due recent code changes
  915. Revision 1.23 2002/04/06 18:13:01 jonas
  916. * several powerpc-related additions and fixes
  917. Revision 1.22 2002/03/31 20:26:35 jonas
  918. + a_loadfpu_* and a_loadmm_* methods in tcg
  919. * register allocation is now handled by a class and is mostly processor
  920. independent (+rgobj.pas and i386/rgcpu.pas)
  921. * temp allocation is now handled by a class (+tgobj.pas, -i386\tgcpu.pas)
  922. * some small improvements and fixes to the optimizer
  923. * some register allocation fixes
  924. * some fpuvaroffset fixes in the unary minus node
  925. * push/popusedregisters is now called rg.save/restoreusedregisters and
  926. (for i386) uses temps instead of push/pop's when using -Op3 (that code is
  927. also better optimizable)
  928. * fixed and optimized register saving/restoring for new/dispose nodes
  929. * LOC_FPU locations now also require their "register" field to be set to
  930. R_ST, not R_ST0 (the latter is used for LOC_CFPUREGISTER locations only)
  931. - list field removed of the tnode class because it's not used currently
  932. and can cause hard-to-find bugs
  933. }