psub.pas 54 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586878889909192939495969798991001011021031041051061071081091101111121131141151161171181191201211221231241251261271281291301311321331341351361371381391401411421431441451461471481491501511521531541551561571581591601611621631641651661671681691701711721731741751761771781791801811821831841851861871881891901911921931941951961971981992002012022032042052062072082092102112122132142152162172182192202212222232242252262272282292302312322332342352362372382392402412422432442452462472482492502512522532542552562572582592602612622632642652662672682692702712722732742752762772782792802812822832842852862872882892902912922932942952962972982993003013023033043053063073083093103113123133143153163173183193203213223233243253263273283293303313323333343353363373383393403413423433443453463473483493503513523533543553563573583593603613623633643653663673683693703713723733743753763773783793803813823833843853863873883893903913923933943953963973983994004014024034044054064074084094104114124134144154164174184194204214224234244254264274284294304314324334344354364374384394404414424434444454464474484494504514524534544554564574584594604614624634644654664674684694704714724734744754764774784794804814824834844854864874884894904914924934944954964974984995005015025035045055065075085095105115125135145155165175185195205215225235245255265275285295305315325335345355365375385395405415425435445455465475485495505515525535545555565575585595605615625635645655665675685695705715725735745755765775785795805815825835845855865875885895905915925935945955965975985996006016026036046056066076086096106116126136146156166176186196206216226236246256266276286296306316326336346356366376386396406416426436446456466476486496506516526536546556566576586596606616626636646656666676686696706716726736746756766776786796806816826836846856866876886896906916926936946956966976986997007017027037047057067077087097107117127137147157167177187197207217227237247257267277287297307317327337347357367377387397407417427437447457467477487497507517527537547557567577587597607617627637647657667677687697707717727737747757767777787797807817827837847857867877887897907917927937947957967977987998008018028038048058068078088098108118128138148158168178188198208218228238248258268278288298308318328338348358368378388398408418428438448458468478488498508518528538548558568578588598608618628638648658668678688698708718728738748758768778788798808818828838848858868878888898908918928938948958968978988999009019029039049059069079089099109119129139149159169179189199209219229239249259269279289299309319329339349359369379389399409419429439449459469479489499509519529539549559569579589599609619629639649659669679689699709719729739749759769779789799809819829839849859869879889899909919929939949959969979989991000100110021003100410051006100710081009101010111012101310141015101610171018101910201021102210231024102510261027102810291030103110321033103410351036103710381039104010411042104310441045104610471048104910501051105210531054105510561057105810591060106110621063106410651066106710681069107010711072107310741075107610771078107910801081108210831084108510861087108810891090109110921093109410951096109710981099110011011102110311041105110611071108110911101111111211131114111511161117111811191120112111221123112411251126112711281129113011311132113311341135113611371138113911401141114211431144114511461147114811491150115111521153115411551156115711581159116011611162116311641165116611671168116911701171117211731174117511761177117811791180118111821183118411851186118711881189119011911192119311941195119611971198119912001201120212031204120512061207120812091210121112121213121412151216121712181219122012211222122312241225122612271228122912301231123212331234123512361237123812391240124112421243124412451246124712481249125012511252125312541255125612571258125912601261126212631264126512661267126812691270127112721273127412751276127712781279128012811282128312841285128612871288128912901291129212931294129512961297129812991300130113021303130413051306130713081309131013111312131313141315131613171318131913201321132213231324132513261327132813291330133113321333133413351336133713381339134013411342134313441345134613471348134913501351135213531354135513561357135813591360136113621363136413651366136713681369137013711372137313741375137613771378137913801381138213831384138513861387138813891390139113921393139413951396139713981399140014011402140314041405140614071408140914101411141214131414141514161417141814191420142114221423142414251426142714281429143014311432143314341435143614371438143914401441144214431444144514461447144814491450145114521453145414551456145714581459146014611462146314641465
  1. {
  2. Copyright (c) 1998-2002 by Florian Klaempfl, Daniel Mantione
  3. Does the parsing and codegeneration at subroutine level
  4. This program is free software; you can redistribute it and/or modify
  5. it under the terms of the GNU General Public License as published by
  6. the Free Software Foundation; either version 2 of the License, or
  7. (at your option) any later version.
  8. This program is distributed in the hope that it will be useful,
  9. but WITHOUT ANY WARRANTY; without even the implied warranty of
  10. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  11. GNU General Public License for more details.
  12. You should have received a copy of the GNU General Public License
  13. along with this program; if not, write to the Free Software
  14. Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  15. ****************************************************************************
  16. }
  17. unit psub;
  18. {$i fpcdefs.inc}
  19. interface
  20. uses
  21. cclasses,globals,
  22. node,nbas,
  23. symdef,procinfo;
  24. type
  25. tcgprocinfo = class(tprocinfo)
  26. private
  27. procedure add_entry_exit_code;
  28. public
  29. { code for the subroutine as tree }
  30. code : tnode;
  31. { positions in the tree for init/final }
  32. entry_asmnode,
  33. loadpara_asmnode,
  34. exitlabel_asmnode,
  35. stackcheck_asmnode,
  36. init_asmnode,
  37. final_asmnode : tasmnode;
  38. { list to store the procinfo's of the nested procedures }
  39. nestedprocs : tlinkedlist;
  40. constructor create(aparent:tprocinfo);override;
  41. destructor destroy;override;
  42. procedure printproc;
  43. procedure generate_code;
  44. procedure resetprocdef;
  45. procedure add_to_symtablestack;
  46. procedure remove_from_symtablestack;
  47. procedure parse_body;
  48. end;
  49. procedure printnode_reset;
  50. { reads the declaration blocks }
  51. procedure read_declarations(islibrary : boolean);
  52. { reads declarations in the interface part of a unit }
  53. procedure read_interface_declarations;
  54. implementation
  55. uses
  56. { common }
  57. cutils,
  58. { global }
  59. globtype,tokens,verbose,comphook,
  60. systems,
  61. { aasm }
  62. cpubase,aasmbase,aasmtai,
  63. { symtable }
  64. symconst,symbase,symsym,symtype,symtable,defutil,
  65. paramgr,
  66. ppu,fmodule,
  67. { pass 1 }
  68. nutils,nld,ncal,ncon,nflw,nadd,ncnv,nmem,
  69. pass_1,
  70. {$ifdef state_tracking}
  71. nstate,
  72. {$endif state_tracking}
  73. { pass 2 }
  74. {$ifndef NOPASS2}
  75. pass_2,
  76. {$endif}
  77. { parser }
  78. scanner,import,gendef,
  79. pbase,pstatmnt,pdecl,pdecsub,pexports,
  80. { codegen }
  81. tgobj,cgobj,
  82. ncgutil,regvars
  83. {$ifdef arm}
  84. ,aasmcpu
  85. {$endif arm}
  86. {$ifndef NOOPT}
  87. {$ifdef i386}
  88. ,aopt386
  89. {$else i386}
  90. ,aopt
  91. {$endif i386}
  92. {$endif}
  93. ;
  94. {****************************************************************************
  95. PROCEDURE/FUNCTION BODY PARSING
  96. ****************************************************************************}
  97. procedure initializevars(p:tnamedindexitem;arg:pointer);
  98. var
  99. b : tblocknode;
  100. begin
  101. if not (tsym(p).typ in [localvarsym,globalvarsym]) then
  102. exit;
  103. with tabstractnormalvarsym(p) do
  104. begin
  105. if assigned(defaultconstsym) then
  106. begin
  107. b:=tblocknode(arg);
  108. b.left:=cstatementnode.create(
  109. cassignmentnode.create(
  110. cloadnode.create(tsym(p),tsym(p).owner),
  111. cloadnode.create(defaultconstsym,defaultconstsym.owner)),
  112. b.left);
  113. end;
  114. end;
  115. end;
  116. procedure check_finalize_paras(p : tnamedindexitem;arg:pointer);
  117. begin
  118. if (tsym(p).typ=paravarsym) and
  119. (tparavarsym(p).varspez=vs_value) and
  120. not is_class(tparavarsym(p).vartype.def) and
  121. tparavarsym(p).vartype.def.needs_inittable then
  122. include(current_procinfo.flags,pi_needs_implicit_finally);
  123. end;
  124. procedure check_finalize_locals(p : tnamedindexitem;arg:pointer);
  125. begin
  126. if (tsym(p).typ=localvarsym) and
  127. (tlocalvarsym(p).refs>0) and
  128. not(vo_is_funcret in tlocalvarsym(p).varoptions) and
  129. not(is_class(tlocalvarsym(p).vartype.def)) and
  130. tlocalvarsym(p).vartype.def.needs_inittable then
  131. include(current_procinfo.flags,pi_needs_implicit_finally);
  132. end;
  133. function block(islibrary : boolean) : tnode;
  134. begin
  135. { parse const,types and vars }
  136. read_declarations(islibrary);
  137. { do we have an assembler block without the po_assembler?
  138. we should allow this for Delphi compatibility (PFV) }
  139. if (token=_ASM) and (m_delphi in aktmodeswitches) then
  140. include(current_procinfo.procdef.procoptions,po_assembler);
  141. { Handle assembler block different }
  142. if (po_assembler in current_procinfo.procdef.procoptions) then
  143. begin
  144. block:=assembler_block;
  145. exit;
  146. end;
  147. {Unit initialization?.}
  148. if (
  149. assigned(current_procinfo.procdef.localst) and
  150. (current_procinfo.procdef.localst.symtablelevel=main_program_level) and
  151. (current_module.is_unit)
  152. ) or
  153. islibrary then
  154. begin
  155. if (token=_END) then
  156. begin
  157. consume(_END);
  158. { We need at least a node, else the entry/exit code is not
  159. generated and thus no PASCALMAIN symbol which we need (PFV) }
  160. if islibrary then
  161. block:=cnothingnode.create
  162. else
  163. block:=nil;
  164. end
  165. else
  166. begin
  167. if token=_INITIALIZATION then
  168. begin
  169. { The library init code is already called and does not
  170. need to be in the initfinal table (PFV) }
  171. if not islibrary then
  172. current_module.flags:=current_module.flags or uf_init;
  173. block:=statement_block(_INITIALIZATION);
  174. end
  175. else if (token=_FINALIZATION) then
  176. begin
  177. if (current_module.flags and uf_finalize)<>0 then
  178. block:=statement_block(_FINALIZATION)
  179. else
  180. begin
  181. { can we allow no INITIALIZATION for DLL ??
  182. I think it should work PM }
  183. block:=nil;
  184. exit;
  185. end;
  186. end
  187. else
  188. begin
  189. { The library init code is already called and does not
  190. need to be in the initfinal table (PFV) }
  191. if not islibrary then
  192. current_module.flags:=current_module.flags or uf_init;
  193. block:=statement_block(_BEGIN);
  194. end;
  195. end;
  196. end
  197. else
  198. begin
  199. block:=statement_block(_BEGIN);
  200. if symtablestack.symtabletype=localsymtable then
  201. symtablestack.foreach_static(@initializevars,block);
  202. end;
  203. end;
  204. {****************************************************************************
  205. PROCEDURE/FUNCTION COMPILING
  206. ****************************************************************************}
  207. procedure printnode_reset;
  208. begin
  209. assign(printnodefile,treelogfilename);
  210. {$I-}
  211. rewrite(printnodefile);
  212. {$I+}
  213. if ioresult<>0 then
  214. begin
  215. Comment(V_Error,'Error creating '+treelogfilename);
  216. exit;
  217. end;
  218. close(printnodefile);
  219. end;
  220. function generate_bodyentry_block:tnode;
  221. var
  222. srsym : tsym;
  223. para : tcallparanode;
  224. newstatement : tstatementnode;
  225. htype : ttype;
  226. begin
  227. result:=internalstatements(newstatement);
  228. if assigned(current_procinfo.procdef._class) then
  229. begin
  230. { a constructor needs a help procedure }
  231. if (current_procinfo.procdef.proctypeoption=potype_constructor) then
  232. begin
  233. if is_class(current_procinfo.procdef._class) then
  234. begin
  235. include(current_procinfo.flags,pi_needs_implicit_finally);
  236. srsym:=search_class_member(current_procinfo.procdef._class,'NEWINSTANCE');
  237. if assigned(srsym) and
  238. (srsym.typ=procsym) then
  239. begin
  240. { if vmt>1 then newinstance }
  241. addstatement(newstatement,cifnode.create(
  242. caddnode.create(gtn,
  243. ctypeconvnode.create_internal(
  244. load_vmt_pointer_node,
  245. voidpointertype),
  246. cpointerconstnode.create(1,voidpointertype)),
  247. cassignmentnode.create(
  248. ctypeconvnode.create_internal(
  249. load_self_pointer_node,
  250. voidpointertype),
  251. ccallnode.create(nil,tprocsym(srsym),srsym.owner,load_vmt_pointer_node,[])),
  252. nil));
  253. end
  254. else
  255. internalerror(200305108);
  256. end
  257. else
  258. if is_object(current_procinfo.procdef._class) then
  259. begin
  260. htype.setdef(current_procinfo.procdef._class);
  261. htype.setdef(tpointerdef.create(htype));
  262. { parameter 3 : vmt_offset }
  263. { parameter 2 : address of pointer to vmt,
  264. this is required to allow setting the vmt to -1 to indicate
  265. that memory was allocated }
  266. { parameter 1 : self pointer }
  267. para:=ccallparanode.create(
  268. cordconstnode.create(current_procinfo.procdef._class.vmt_offset,s32inttype,false),
  269. ccallparanode.create(
  270. ctypeconvnode.create_internal(
  271. load_vmt_pointer_node,
  272. voidpointertype),
  273. ccallparanode.create(
  274. ctypeconvnode.create_internal(
  275. load_self_pointer_node,
  276. voidpointertype),
  277. nil)));
  278. addstatement(newstatement,cassignmentnode.create(
  279. ctypeconvnode.create_internal(
  280. load_self_pointer_node,
  281. voidpointertype),
  282. ccallnode.createintern('fpc_help_constructor',para)));
  283. end
  284. else
  285. internalerror(200305103);
  286. { if self=nil then exit
  287. calling fail instead of exit is useless because
  288. there is nothing to dispose (PFV) }
  289. addstatement(newstatement,cifnode.create(
  290. caddnode.create(equaln,
  291. load_self_pointer_node,
  292. cnilnode.create),
  293. cexitnode.create(nil),
  294. nil));
  295. end;
  296. { maybe call BeforeDestruction for classes }
  297. if (current_procinfo.procdef.proctypeoption=potype_destructor) and
  298. is_class(current_procinfo.procdef._class) then
  299. begin
  300. srsym:=search_class_member(current_procinfo.procdef._class,'BEFOREDESTRUCTION');
  301. if assigned(srsym) and
  302. (srsym.typ=procsym) then
  303. begin
  304. { if vmt<>0 then beforedestruction }
  305. addstatement(newstatement,cifnode.create(
  306. caddnode.create(unequaln,
  307. load_vmt_pointer_node,
  308. cnilnode.create),
  309. ccallnode.create(nil,tprocsym(srsym),srsym.owner,load_self_node,[]),
  310. nil));
  311. end
  312. else
  313. internalerror(200305104);
  314. end;
  315. end;
  316. end;
  317. function generate_bodyexit_block:tnode;
  318. var
  319. srsym : tsym;
  320. para : tcallparanode;
  321. newstatement : tstatementnode;
  322. begin
  323. result:=internalstatements(newstatement);
  324. if assigned(current_procinfo.procdef._class) then
  325. begin
  326. { maybe call AfterConstruction for classes }
  327. if (current_procinfo.procdef.proctypeoption=potype_constructor) and
  328. is_class(current_procinfo.procdef._class) then
  329. begin
  330. srsym:=search_class_member(current_procinfo.procdef._class,'AFTERCONSTRUCTION');
  331. if assigned(srsym) and
  332. (srsym.typ=procsym) then
  333. begin
  334. { Self can be nil when fail is called }
  335. { if self<>nil and vmt<>nil then afterconstruction }
  336. addstatement(newstatement,cifnode.create(
  337. caddnode.create(andn,
  338. caddnode.create(unequaln,
  339. load_self_pointer_node,
  340. cnilnode.create),
  341. caddnode.create(unequaln,
  342. load_vmt_pointer_node,
  343. cnilnode.create)),
  344. ccallnode.create(nil,tprocsym(srsym),srsym.owner,load_self_node,[]),
  345. nil));
  346. end
  347. else
  348. internalerror(200305106);
  349. end;
  350. { a destructor needs a help procedure }
  351. if (current_procinfo.procdef.proctypeoption=potype_destructor) then
  352. begin
  353. if is_class(current_procinfo.procdef._class) then
  354. begin
  355. srsym:=search_class_member(current_procinfo.procdef._class,'FREEINSTANCE');
  356. if assigned(srsym) and
  357. (srsym.typ=procsym) then
  358. begin
  359. { if self<>0 and vmt=1 then freeinstance }
  360. addstatement(newstatement,cifnode.create(
  361. caddnode.create(andn,
  362. caddnode.create(unequaln,
  363. load_self_pointer_node,
  364. cnilnode.create),
  365. caddnode.create(equaln,
  366. ctypeconvnode.create(
  367. load_vmt_pointer_node,
  368. voidpointertype),
  369. cpointerconstnode.create(1,voidpointertype))),
  370. ccallnode.create(nil,tprocsym(srsym),srsym.owner,load_self_node,[]),
  371. nil));
  372. end
  373. else
  374. internalerror(200305108);
  375. end
  376. else
  377. if is_object(current_procinfo.procdef._class) then
  378. begin
  379. { finalize object data }
  380. if current_procinfo.procdef._class.needs_inittable then
  381. addstatement(newstatement,finalize_data_node(load_self_node));
  382. { parameter 3 : vmt_offset }
  383. { parameter 2 : pointer to vmt }
  384. { parameter 1 : self pointer }
  385. para:=ccallparanode.create(
  386. cordconstnode.create(current_procinfo.procdef._class.vmt_offset,s32inttype,false),
  387. ccallparanode.create(
  388. ctypeconvnode.create_internal(
  389. load_vmt_pointer_node,
  390. voidpointertype),
  391. ccallparanode.create(
  392. ctypeconvnode.create_internal(
  393. load_self_pointer_node,
  394. voidpointertype),
  395. nil)));
  396. addstatement(newstatement,
  397. ccallnode.createintern('fpc_help_destructor',para));
  398. end
  399. else
  400. internalerror(200305105);
  401. end;
  402. end;
  403. end;
  404. function generate_except_block:tnode;
  405. var
  406. pd : tprocdef;
  407. newstatement : tstatementnode;
  408. begin
  409. generate_except_block:=internalstatements(newstatement);
  410. { a constructor needs call destructor (if available) when it
  411. is not inherited }
  412. if assigned(current_procinfo.procdef._class) and
  413. (current_procinfo.procdef.proctypeoption=potype_constructor) then
  414. begin
  415. pd:=current_procinfo.procdef._class.searchdestructor;
  416. if assigned(pd) then
  417. begin
  418. { if vmt<>0 then call destructor }
  419. addstatement(newstatement,cifnode.create(
  420. caddnode.create(unequaln,
  421. load_vmt_pointer_node,
  422. cnilnode.create),
  423. ccallnode.create(nil,tprocsym(pd.procsym),pd.procsym.owner,load_self_node,[]),
  424. nil));
  425. end;
  426. end
  427. else
  428. begin
  429. { no constructor }
  430. { must be the return value finalized before reraising the exception? }
  431. if (not is_void(current_procinfo.procdef.rettype.def)) and
  432. (current_procinfo.procdef.rettype.def.needs_inittable) and
  433. (not is_class(current_procinfo.procdef.rettype.def)) then
  434. addstatement(newstatement,finalize_data_node(load_result_node));
  435. end;
  436. end;
  437. {****************************************************************************
  438. TCGProcInfo
  439. ****************************************************************************}
  440. constructor tcgprocinfo.create(aparent:tprocinfo);
  441. begin
  442. inherited Create(aparent);
  443. nestedprocs:=tlinkedlist.create;
  444. end;
  445. destructor tcgprocinfo.destroy;
  446. begin
  447. nestedprocs.free;
  448. if assigned(code) then
  449. code.free;
  450. inherited destroy;
  451. end;
  452. procedure tcgprocinfo.printproc;
  453. begin
  454. assign(printnodefile,treelogfilename);
  455. {$I-}
  456. append(printnodefile);
  457. if ioresult<>0 then
  458. rewrite(printnodefile);
  459. {$I+}
  460. if ioresult<>0 then
  461. begin
  462. Comment(V_Error,'Error creating '+treelogfilename);
  463. exit;
  464. end;
  465. writeln(printnodefile);
  466. writeln(printnodefile,'*******************************************************************************');
  467. writeln(printnodefile,procdef.fullprocname(false));
  468. writeln(printnodefile,'*******************************************************************************');
  469. printnode(printnodefile,code);
  470. close(printnodefile);
  471. end;
  472. procedure tcgprocinfo.add_entry_exit_code;
  473. var
  474. finalcode,
  475. bodyentrycode,
  476. bodyexitcode,
  477. exceptcode : tnode;
  478. newblock : tblocknode;
  479. codestatement,
  480. newstatement : tstatementnode;
  481. oldfilepos : tfileposinfo;
  482. begin
  483. oldfilepos:=aktfilepos;
  484. { Generate code/locations used at start of proc }
  485. aktfilepos:=entrypos;
  486. entry_asmnode:=casmnode.create_get_position;
  487. loadpara_asmnode:=casmnode.create_get_position;
  488. stackcheck_asmnode:=casmnode.create_get_position;
  489. init_asmnode:=casmnode.create_get_position;
  490. bodyentrycode:=generate_bodyentry_block;
  491. { Generate code/locations used at end of proc }
  492. aktfilepos:=exitpos;
  493. exitlabel_asmnode:=casmnode.create_get_position;
  494. final_asmnode:=casmnode.create_get_position;
  495. bodyexitcode:=generate_bodyexit_block;
  496. { Generate procedure by combining init+body+final,
  497. depending on the implicit finally we need to add
  498. an try...finally...end wrapper }
  499. newblock:=internalstatements(newstatement);
  500. if (cs_implicit_exceptions in aktmoduleswitches) and
  501. (pi_needs_implicit_finally in flags) and
  502. { but it's useless in init/final code of units }
  503. not(procdef.proctypeoption in [potype_unitfinalize,potype_unitinit]) then
  504. begin
  505. { Generate special exception block only needed when
  506. implicit finaly is used }
  507. aktfilepos:=exitpos;
  508. exceptcode:=generate_except_block;
  509. { Generate code that will be in the try...finally }
  510. finalcode:=internalstatements(codestatement);
  511. addstatement(codestatement,bodyexitcode);
  512. addstatement(codestatement,final_asmnode);
  513. { Initialize before try...finally...end frame }
  514. addstatement(newstatement,loadpara_asmnode);
  515. addstatement(newstatement,stackcheck_asmnode);
  516. addstatement(newstatement,entry_asmnode);
  517. addstatement(newstatement,init_asmnode);
  518. addstatement(newstatement,bodyentrycode);
  519. aktfilepos:=entrypos;
  520. addstatement(newstatement,ctryfinallynode.create_implicit(
  521. code,
  522. finalcode,
  523. exceptcode));
  524. addstatement(newstatement,exitlabel_asmnode);
  525. { set flag the implicit finally has been generated }
  526. include(flags,pi_has_implicit_finally);
  527. end
  528. else
  529. begin
  530. addstatement(newstatement,loadpara_asmnode);
  531. addstatement(newstatement,stackcheck_asmnode);
  532. addstatement(newstatement,entry_asmnode);
  533. addstatement(newstatement,init_asmnode);
  534. addstatement(newstatement,bodyentrycode);
  535. addstatement(newstatement,code);
  536. addstatement(newstatement,exitlabel_asmnode);
  537. addstatement(newstatement,bodyexitcode);
  538. addstatement(newstatement,final_asmnode);
  539. end;
  540. do_firstpass(newblock);
  541. code:=newblock;
  542. aktfilepos:=oldfilepos;
  543. end;
  544. procedure clearrefs(p : tnamedindexitem;arg:pointer);
  545. begin
  546. if (tsym(p).typ in [localvarsym,paravarsym,globalvarsym]) then
  547. if tabstractvarsym(p).refs>1 then
  548. tabstractvarsym(p).refs:=1;
  549. end;
  550. procedure tcgprocinfo.generate_code;
  551. var
  552. oldprocinfo : tprocinfo;
  553. oldaktmaxfpuregisters : longint;
  554. oldfilepos : tfileposinfo;
  555. templist : Taasmoutput;
  556. headertai : tai;
  557. begin
  558. { the initialization procedure can be empty, then we
  559. don't need to generate anything. When it was an empty
  560. procedure there would be at least a blocknode }
  561. if not assigned(code) then
  562. exit;
  563. { We need valid code }
  564. if Errorcount<>0 then
  565. exit;
  566. { The RA and Tempgen shall not be available yet }
  567. if assigned(tg) then
  568. internalerror(200309201);
  569. oldprocinfo:=current_procinfo;
  570. oldfilepos:=aktfilepos;
  571. oldaktmaxfpuregisters:=aktmaxfpuregisters;
  572. current_procinfo:=self;
  573. aktfilepos:=entrypos;
  574. { get new labels }
  575. aktbreaklabel:=nil;
  576. aktcontinuelabel:=nil;
  577. templist:=Taasmoutput.create;
  578. { add parast/localst to symtablestack }
  579. add_to_symtablestack;
  580. { when size optimization only count occurrence }
  581. if cs_littlesize in aktglobalswitches then
  582. cg.t_times:=1
  583. else
  584. { reference for repetition is 100 }
  585. cg.t_times:=100;
  586. { clear register count }
  587. symtablestack.foreach_static(@clearrefs,nil);
  588. symtablestack.next.foreach_static(@clearrefs,nil);
  589. { there's always a call to FPC_INITIALIZEUNITS/FPC_DO_EXIT in the main program }
  590. if (procdef.localst.symtablelevel=main_program_level) and
  591. (not current_module.is_unit) then
  592. include(flags,pi_do_call);
  593. { set implicit_finally flag when there are locals/paras to be finalized }
  594. current_procinfo.procdef.parast.foreach_static(@check_finalize_paras,nil);
  595. current_procinfo.procdef.localst.foreach_static(@check_finalize_locals,nil);
  596. { firstpass everything }
  597. flowcontrol:=[];
  598. do_firstpass(code);
  599. if code.registersfpu>0 then
  600. include(current_procinfo.flags,pi_uses_fpu);
  601. { add implicit entry and exit code }
  602. add_entry_exit_code;
  603. { only do secondpass if there are no errors }
  604. if ErrorCount=0 then
  605. begin
  606. { set the start offset to the start of the temp area in the stack }
  607. tg:=ttgobj.create;
  608. { Create register allocator }
  609. cg.init_register_allocators;
  610. set_first_temp_offset;
  611. generate_parameter_info;
  612. { Allocate space in temp/registers for parast and localst }
  613. aktfilepos:=entrypos;
  614. gen_alloc_symtable(aktproccode,procdef.parast);
  615. gen_alloc_symtable(aktproccode,procdef.localst);
  616. { Store temp offset for information about 'real' temps }
  617. tempstart:=tg.lasttemp;
  618. { Generate code to load register parameters in temps and insert local
  619. copies for values parameters. This must be done before the code for the
  620. body is generated because the localloc is updated.
  621. Note: The generated code will be inserted after the code generation of
  622. the body is finished, because only then the position is known }
  623. {$ifdef oldregvars}
  624. assign_regvars(code);
  625. {$endif oldreg}
  626. aktfilepos:=entrypos;
  627. gen_load_para_value(templist);
  628. { caller paraloc info is also necessary in the stackframe_entry
  629. code of the ppc (and possibly other processors) }
  630. if not procdef.has_paraloc_info then
  631. begin
  632. procdef.requiredargarea:=paramanager.create_paraloc_info(procdef,callerside);
  633. procdef.has_paraloc_info:=true;
  634. end;
  635. { generate code for the node tree }
  636. do_secondpass(code);
  637. aktproccode.concatlist(exprasmlist);
  638. {$ifdef i386}
  639. procdef.fpu_used:=code.registersfpu;
  640. {$endif i386}
  641. { The position of the loadpara_asmnode is now known }
  642. aktproccode.insertlistafter(loadpara_asmnode.currenttai,templist);
  643. { first generate entry and initialize code with the correct
  644. position and switches }
  645. aktfilepos:=entrypos;
  646. aktlocalswitches:=entryswitches;
  647. gen_entry_code(templist);
  648. aktproccode.insertlistafter(entry_asmnode.currenttai,templist);
  649. gen_initialize_code(templist);
  650. aktproccode.insertlistafter(init_asmnode.currenttai,templist);
  651. { now generate finalize and exit code with the correct position
  652. and switches }
  653. aktfilepos:=exitpos;
  654. aktlocalswitches:=exitswitches;
  655. gen_finalize_code(templist);
  656. { the finalcode must be concated if there was no position available,
  657. using insertlistafter will result in an insert at the start
  658. when currentai=nil }
  659. if assigned(final_asmnode.currenttai) then
  660. aktproccode.insertlistafter(final_asmnode.currenttai,templist)
  661. else
  662. aktproccode.concatlist(templist);
  663. { insert exit label at the correct position }
  664. cg.a_label(templist,aktexitlabel);
  665. if assigned(exitlabel_asmnode.currenttai) then
  666. aktproccode.insertlistafter(exitlabel_asmnode.currenttai,templist)
  667. else
  668. aktproccode.concatlist(templist);
  669. { exit code }
  670. gen_exit_code(templist);
  671. aktproccode.concatlist(templist);
  672. {$ifdef OLDREGVARS}
  673. { note: this must be done only after as much code as possible has }
  674. { been generated. The result is that when you ungetregister() a }
  675. { regvar, it will actually free the regvar (and alse free the }
  676. { the regvars at the same time). Doing this too early will }
  677. { confuse the register allocator, as the regvars will still be }
  678. { used. It should be done before loading the result regs (so }
  679. { they don't conflict with the regvars) and before }
  680. { gen_entry_code (that one has to be able to allocate the }
  681. { regvars again) (JM) }
  682. free_regvars(aktproccode);
  683. {$endif OLDREGVARS}
  684. { add code that will load the return value, this is not done
  685. for assembler routines when they didn't reference the result
  686. variable }
  687. gen_load_return_value(templist);
  688. aktproccode.concatlist(templist);
  689. { generate symbol and save end of header position }
  690. aktfilepos:=entrypos;
  691. gen_proc_symbol(templist);
  692. headertai:=tai(templist.last);
  693. { insert symbol }
  694. aktproccode.insertlist(templist);
  695. { Free space in temp/registers for parast and localst, must be
  696. done after gen_entry_code }
  697. aktfilepos:=exitpos;
  698. gen_free_symtable(aktproccode,procdef.localst);
  699. gen_free_symtable(aktproccode,procdef.parast);
  700. { Already reserve all registers for stack checking code and
  701. generate the call to the helper function }
  702. if (cs_check_stack in entryswitches) and
  703. not(po_assembler in procdef.procoptions) and
  704. (current_procinfo.procdef.proctypeoption<>potype_proginit) then
  705. begin
  706. aktfilepos:=entrypos;
  707. gen_stack_check_call(templist);
  708. aktproccode.insertlistafter(stackcheck_asmnode.currenttai,templist)
  709. end;
  710. { The procedure body is finished, we can now
  711. allocate the registers }
  712. cg.do_register_allocation(aktproccode,headertai);
  713. { Add save and restore of used registers }
  714. aktfilepos:=entrypos;
  715. gen_save_used_regs(templist);
  716. aktproccode.insertlistafter(headertai,templist);
  717. aktfilepos:=exitpos;
  718. gen_restore_used_regs(aktproccode);
  719. { We know the size of the stack, now we can generate the
  720. parameter that is passed to the stack checking code }
  721. if (cs_check_stack in entryswitches) and
  722. not(po_assembler in procdef.procoptions) and
  723. (current_procinfo.procdef.proctypeoption<>potype_proginit) then
  724. begin
  725. aktfilepos:=entrypos;
  726. gen_stack_check_size_para(templist);
  727. aktproccode.insertlistafter(stackcheck_asmnode.currenttai,templist)
  728. end;
  729. { Add entry code (stack allocation) after header }
  730. aktfilepos:=entrypos;
  731. gen_proc_entry_code(templist);
  732. aktproccode.insertlistafter(headertai,templist);
  733. { Add exit code at the end }
  734. aktfilepos:=exitpos;
  735. gen_proc_exit_code(templist);
  736. aktproccode.concatlist(templist);
  737. { check if the implicit finally has been generated. The flag
  738. should already be set in pass1 }
  739. if (cs_implicit_exceptions in aktmoduleswitches) and
  740. not(procdef.proctypeoption in [potype_unitfinalize,potype_unitinit]) and
  741. (pi_needs_implicit_finally in flags) and
  742. not(pi_has_implicit_finally in flags) then
  743. internalerror(200405231);
  744. {$ifndef NoOpt}
  745. if not(cs_no_regalloc in aktglobalswitches) then
  746. begin
  747. if (cs_optimize in aktglobalswitches) and
  748. { do not optimize pure assembler procedures }
  749. not(pi_is_assembler in flags) then
  750. optimize(aktproccode);
  751. end;
  752. {$endif NoOpt}
  753. { Add end symbol and debug info }
  754. aktfilepos:=exitpos;
  755. gen_proc_symbol_end(templist);
  756. aktproccode.concatlist(templist);
  757. {$ifdef ARM}
  758. { because of the limited constant size of the arm, all data access is done pc relative }
  759. insertpcrelativedata(aktproccode,aktlocaldata);
  760. {$endif ARM}
  761. { add the procedure to the al_procedures }
  762. maybe_new_object_file(asmlist[al_procedures]);
  763. new_section(asmlist[al_procedures],sec_code,lower(procdef.mangledname),aktalignment.procalign);
  764. asmlist[al_procedures].concatlist(aktproccode);
  765. { save local data (casetable) also in the same file }
  766. if assigned(aktlocaldata) and
  767. (not aktlocaldata.empty) then
  768. asmlist[al_procedures].concatlist(aktlocaldata);
  769. { only now we can remove the temps }
  770. tg.resettempgen;
  771. { stop tempgen and ra }
  772. tg.free;
  773. cg.done_register_allocators;
  774. tg:=nil;
  775. end;
  776. { restore symtablestack }
  777. remove_from_symtablestack;
  778. { restore }
  779. templist.free;
  780. aktmaxfpuregisters:=oldaktmaxfpuregisters;
  781. aktfilepos:=oldfilepos;
  782. current_procinfo:=oldprocinfo;
  783. end;
  784. procedure tcgprocinfo.add_to_symtablestack;
  785. var
  786. _class,hp : tobjectdef;
  787. begin
  788. { insert symtables for the class, but only if it is no nested function }
  789. if assigned(procdef._class) and
  790. not(assigned(parent) and
  791. assigned(parent.procdef) and
  792. assigned(parent.procdef._class)) then
  793. begin
  794. { insert them in the reverse order }
  795. hp:=nil;
  796. repeat
  797. _class:=procdef._class;
  798. while _class.childof<>hp do
  799. _class:=_class.childof;
  800. hp:=_class;
  801. _class.symtable.next:=symtablestack;
  802. symtablestack:=_class.symtable;
  803. until hp=procdef._class;
  804. end;
  805. { insert parasymtable in symtablestack when parsing
  806. a function }
  807. if procdef.parast.symtablelevel>=normal_function_level then
  808. begin
  809. procdef.parast.next:=symtablestack;
  810. symtablestack:=procdef.parast;
  811. end;
  812. procdef.localst.next:=symtablestack;
  813. symtablestack:=procdef.localst;
  814. end;
  815. procedure tcgprocinfo.remove_from_symtablestack;
  816. begin
  817. { remove localst/parast }
  818. if procdef.parast.symtablelevel>=normal_function_level then
  819. symtablestack:=symtablestack.next.next
  820. else
  821. symtablestack:=symtablestack.next;
  822. { remove class member symbol tables }
  823. while symtablestack.symtabletype=objectsymtable do
  824. symtablestack:=symtablestack.next;
  825. end;
  826. procedure tcgprocinfo.resetprocdef;
  827. begin
  828. { remove code tree, if not inline procedure }
  829. if assigned(code) then
  830. begin
  831. { the inline procedure has already got a copy of the tree
  832. stored in procdef.inlininginfo }
  833. code.free;
  834. code:=nil;
  835. end;
  836. end;
  837. function checknodeinlining(procdef: tprocdef): boolean;
  838. var
  839. i : integer;
  840. currpara : tparavarsym;
  841. begin
  842. result := false;
  843. if (pi_has_assembler_block in current_procinfo.flags) then
  844. exit;
  845. for i:=0 to procdef.paras.count-1 do
  846. begin
  847. currpara:=tparavarsym(procdef.paras[i]);
  848. { we can't handle formaldefs and special arrays (the latter may need a }
  849. { re-basing of the index, i.e. if you pass an array[1..10] as open array, }
  850. { you have to add 1 to all index operations if you directly inline it }
  851. if ((currpara.varspez in [vs_out,vs_var]) and
  852. (currpara.vartype.def.deftype=formaldef)) or
  853. is_special_array(currpara.vartype.def) then
  854. exit;
  855. end;
  856. result:=true;
  857. end;
  858. procedure tcgprocinfo.parse_body;
  859. var
  860. oldprocinfo : tprocinfo;
  861. oldblock_type : tblock_type;
  862. begin
  863. oldprocinfo:=current_procinfo;
  864. oldblock_type:=block_type;
  865. { reset break and continue labels }
  866. block_type:=bt_body;
  867. current_procinfo:=self;
  868. { calculate the lexical level }
  869. if procdef.parast.symtablelevel>maxnesting then
  870. Message(parser_e_too_much_lexlevel);
  871. { static is also important for local procedures !! }
  872. if (po_staticmethod in procdef.procoptions) then
  873. allow_only_static:=true
  874. else if (procdef.parast.symtablelevel=normal_function_level) then
  875. allow_only_static:=false;
  876. {$ifdef state_tracking}
  877. { aktstate:=Tstate_storage.create;}
  878. {$endif state_tracking}
  879. { create a local symbol table for this routine }
  880. if not assigned(procdef.localst) then
  881. procdef.insert_localst;
  882. { add parast/localst to symtablestack }
  883. add_to_symtablestack;
  884. { constant symbols are inserted in this symboltable }
  885. constsymtable:=symtablestack;
  886. { save entry info }
  887. entrypos:=aktfilepos;
  888. entryswitches:=aktlocalswitches;
  889. { parse the code ... }
  890. code:=block(current_module.islibrary);
  891. { save exit info }
  892. exitswitches:=aktlocalswitches;
  893. exitpos:=last_endtoken_filepos;
  894. { the procedure is now defined }
  895. procdef.forwarddef:=false;
  896. if assigned(code) then
  897. begin
  898. { get a better entry point }
  899. entrypos:=code.fileinfo;
  900. { Finish type checking pass }
  901. do_resulttypepass(code);
  902. end;
  903. { Check for unused labels, forwards, symbols for procedures. Static
  904. symtable is checked in pmodules.
  905. The check must be done after the resulttypepass }
  906. if (Errorcount=0) and
  907. (tstoredsymtable(procdef.localst).symtabletype<>staticsymtable) then
  908. begin
  909. { check if forwards are resolved }
  910. tstoredsymtable(procdef.localst).check_forwards;
  911. { check if all labels are used }
  912. tstoredsymtable(procdef.localst).checklabels;
  913. { remove cross unit overloads }
  914. tstoredsymtable(procdef.localst).unchain_overloaded;
  915. { check for unused symbols, but only if there is no asm block }
  916. if not(pi_has_assembler_block in flags) then
  917. begin
  918. tstoredsymtable(procdef.localst).allsymbolsused;
  919. tstoredsymtable(procdef.parast).allsymbolsused;
  920. end;
  921. end;
  922. if (po_inline in procdef.procoptions) then
  923. begin
  924. { Can we inline this procedure? }
  925. if checknodeinlining(procdef) then
  926. begin
  927. new(procdef.inlininginfo);
  928. include(procdef.procoptions,po_has_inlininginfo);
  929. procdef.inlininginfo^.code:=code.getcopy;
  930. procdef.inlininginfo^.flags:=current_procinfo.flags;
  931. { The blocknode needs to set an exit label }
  932. if procdef.inlininginfo^.code.nodetype=blockn then
  933. include(procdef.inlininginfo^.code.flags,nf_block_with_exit);
  934. end;
  935. end;
  936. { Print the node to tree.log }
  937. if paraprintnodetree=1 then
  938. printproc;
  939. { ... remove symbol tables }
  940. remove_from_symtablestack;
  941. {$ifdef state_tracking}
  942. { aktstate.destroy;}
  943. {$endif state_tracking}
  944. { reset to normal non static function }
  945. if (procdef.parast.symtablelevel=normal_function_level) then
  946. allow_only_static:=false;
  947. current_procinfo:=oldprocinfo;
  948. block_type:=oldblock_type;
  949. end;
  950. {****************************************************************************
  951. PROCEDURE/FUNCTION PARSING
  952. ****************************************************************************}
  953. procedure check_init_paras(p:tnamedindexitem;arg:pointer);
  954. begin
  955. if tsym(p).typ<>paravarsym then
  956. exit;
  957. with tparavarsym(p) do
  958. if (not is_class(vartype.def) and
  959. vartype.def.needs_inittable and
  960. (varspez in [vs_value,vs_out])) then
  961. include(current_procinfo.flags,pi_do_call);
  962. end;
  963. procedure read_proc;
  964. {
  965. Parses the procedure directives, then parses the procedure body, then
  966. generates the code for it
  967. }
  968. procedure do_generate_code(pi:tcgprocinfo);
  969. var
  970. hpi : tcgprocinfo;
  971. begin
  972. { generate code for this procedure }
  973. pi.generate_code;
  974. { process nested procs }
  975. hpi:=tcgprocinfo(pi.nestedprocs.first);
  976. while assigned(hpi) do
  977. begin
  978. do_generate_code(hpi);
  979. hpi:=tcgprocinfo(hpi.next);
  980. end;
  981. pi.resetprocdef;
  982. end;
  983. var
  984. old_current_procinfo : tprocinfo;
  985. oldconstsymtable : tsymtable;
  986. oldfailtokenmode : tmodeswitch;
  987. pdflags : tpdflags;
  988. pd : tprocdef;
  989. isnestedproc : boolean;
  990. s : string;
  991. begin
  992. { save old state }
  993. oldconstsymtable:=constsymtable;
  994. old_current_procinfo:=current_procinfo;
  995. { reset current_procinfo.procdef to nil to be sure that nothing is writing
  996. to an other procdef }
  997. current_procinfo:=nil;
  998. { parse procedure declaration }
  999. if assigned(old_current_procinfo) and
  1000. assigned(old_current_procinfo.procdef) then
  1001. pd:=parse_proc_dec(old_current_procinfo.procdef._class)
  1002. else
  1003. pd:=parse_proc_dec(nil);
  1004. { set the default function options }
  1005. if parse_only then
  1006. begin
  1007. pd.forwarddef:=true;
  1008. { set also the interface flag, for better error message when the
  1009. implementation doesn't much this header }
  1010. pd.interfacedef:=true;
  1011. include(pd.procoptions,po_global);
  1012. pdflags:=[pd_interface];
  1013. end
  1014. else
  1015. begin
  1016. pdflags:=[pd_body];
  1017. if (not current_module.in_interface) then
  1018. include(pdflags,pd_implemen);
  1019. if (not current_module.is_unit) or
  1020. maybe_smartlink_symbol then
  1021. include(pd.procoptions,po_global);
  1022. pd.forwarddef:=false;
  1023. end;
  1024. { parse the directives that may follow }
  1025. parse_proc_directives(pd,pdflags);
  1026. { hint directives, these can be separated by semicolons here,
  1027. that needs to be handled here with a loop (PFV) }
  1028. while try_consume_hintdirective(pd.symoptions) do
  1029. Consume(_SEMICOLON);
  1030. { Set calling convention }
  1031. handle_calling_convention(pd);
  1032. { search for forward declarations }
  1033. if not proc_add_definition(pd) then
  1034. begin
  1035. { A method must be forward defined (in the object declaration) }
  1036. if assigned(pd._class) and
  1037. (not assigned(old_current_procinfo.procdef._class)) then
  1038. begin
  1039. MessagePos1(pd.fileinfo,parser_e_header_dont_match_any_member,pd.fullprocname(false));
  1040. tprocsym(pd.procsym).write_parameter_lists(pd);
  1041. end
  1042. else
  1043. begin
  1044. { Give a better error if there is a forward def in the interface and only
  1045. a single implementation }
  1046. if (not pd.forwarddef) and
  1047. (not pd.interfacedef) and
  1048. (tprocsym(pd.procsym).procdef_count>1) and
  1049. tprocsym(pd.procsym).first_procdef.forwarddef and
  1050. tprocsym(pd.procsym).first_procdef.interfacedef and
  1051. not(tprocsym(pd.procsym).procdef_count>2) then
  1052. begin
  1053. MessagePos1(pd.fileinfo,parser_e_header_dont_match_forward,pd.fullprocname(false));
  1054. tprocsym(pd.procsym).write_parameter_lists(pd);
  1055. end;
  1056. end;
  1057. end;
  1058. { Set mangled name }
  1059. proc_set_mangledname(pd);
  1060. { compile procedure when a body is needed }
  1061. if (pd_body in pdflags) then
  1062. begin
  1063. Message1(parser_d_procedure_start,pd.fullprocname(false));
  1064. { create a new procedure }
  1065. current_procinfo:=cprocinfo.create(old_current_procinfo);
  1066. current_module.procinfo:=current_procinfo;
  1067. current_procinfo.procdef:=pd;
  1068. isnestedproc:=(current_procinfo.procdef.parast.symtablelevel>normal_function_level);
  1069. { Insert mangledname }
  1070. pd.aliasnames.insert(pd.mangledname);
  1071. { Handle Export of this procedure }
  1072. if (po_exports in pd.procoptions) and
  1073. (target_info.system in [system_i386_os2,system_i386_emx]) then
  1074. begin
  1075. pd.aliasnames.insert(pd.procsym.realname);
  1076. if cs_link_deffile in aktglobalswitches then
  1077. deffile.AddExport(pd.mangledname);
  1078. end;
  1079. { Insert result variables in the localst }
  1080. insert_funcret_local(pd);
  1081. { check if there are para's which require initing -> set }
  1082. { pi_do_call (if not yet set) }
  1083. if not(pi_do_call in current_procinfo.flags) then
  1084. pd.parast.foreach_static(@check_init_paras,nil);
  1085. { set _FAIL as keyword if constructor }
  1086. if (pd.proctypeoption=potype_constructor) then
  1087. begin
  1088. oldfailtokenmode:=tokeninfo^[_FAIL].keyword;
  1089. tokeninfo^[_FAIL].keyword:=m_all;
  1090. end;
  1091. tcgprocinfo(current_procinfo).parse_body;
  1092. { When it's a nested procedure then defer the code generation,
  1093. when back at normal function level then generate the code
  1094. for all defered nested procedures and the current procedure }
  1095. if isnestedproc then
  1096. tcgprocinfo(current_procinfo.parent).nestedprocs.insert(current_procinfo)
  1097. else
  1098. begin
  1099. { We can't support inlining for procedures that have nested
  1100. procedures because the nested procedures use a fixed offset
  1101. for accessing locals in the parent procedure (PFV) }
  1102. if (po_inline in current_procinfo.procdef.procoptions) and
  1103. (tcgprocinfo(current_procinfo).nestedprocs.count>0) then
  1104. begin
  1105. Message1(parser_w_not_supported_for_inline,'nested procedures');
  1106. Message(parser_w_inlining_disabled);
  1107. current_procinfo.procdef.proccalloption:=pocall_default;
  1108. end;
  1109. do_generate_code(tcgprocinfo(current_procinfo));
  1110. end;
  1111. { reset _FAIL as _SELF normal }
  1112. if (pd.proctypeoption=potype_constructor) then
  1113. tokeninfo^[_FAIL].keyword:=oldfailtokenmode;
  1114. { release procinfo }
  1115. if tprocinfo(current_module.procinfo)<>current_procinfo then
  1116. internalerror(200304274);
  1117. current_module.procinfo:=current_procinfo.parent;
  1118. if not isnestedproc then
  1119. current_procinfo.free;
  1120. consume(_SEMICOLON);
  1121. end
  1122. else
  1123. begin
  1124. { Handle imports }
  1125. if (po_external in pd.procoptions) then
  1126. begin
  1127. { External declared in implementation, and there was already a
  1128. forward (or interface) declaration then we need to generate
  1129. a stub that calls the external routine }
  1130. if (not pd.forwarddef) and
  1131. (pd.hasforward) and
  1132. not(
  1133. assigned(pd.import_dll) and
  1134. (target_info.system in [system_i386_win32,system_i386_wdosx,
  1135. system_i386_emx,system_i386_os2,system_arm_wince,system_i386_wince])
  1136. ) then
  1137. begin
  1138. s:=proc_get_importname(pd);
  1139. if s<>'' then
  1140. gen_external_stub(asmlist[al_procedures],pd,s);
  1141. end;
  1142. { Import DLL specified? }
  1143. if assigned(pd.import_dll) then
  1144. begin
  1145. { create importlib if not already done }
  1146. if not(current_module.uses_imports) then
  1147. begin
  1148. current_module.uses_imports:=true;
  1149. importlib.preparelib(current_module.realmodulename^);
  1150. end;
  1151. if assigned(pd.import_name) then
  1152. importlib.importprocedure(pd,pd.import_dll^,pd.import_nr,pd.import_name^)
  1153. else
  1154. importlib.importprocedure(pd,pd.import_dll^,pd.import_nr,'');
  1155. end
  1156. else
  1157. begin
  1158. { add import name to external list for DLL scanning }
  1159. if target_info.DllScanSupported then
  1160. current_module.externals.insert(tExternalsItem.create(proc_get_importname(pd)));
  1161. end;
  1162. end;
  1163. end;
  1164. { Restore old state }
  1165. constsymtable:=oldconstsymtable;
  1166. current_procinfo:=old_current_procinfo;
  1167. end;
  1168. {****************************************************************************
  1169. DECLARATION PARSING
  1170. ****************************************************************************}
  1171. { search in symtablestack for not complete classes }
  1172. procedure check_forward_class(p : tnamedindexitem;arg:pointer);
  1173. begin
  1174. if (tsym(p).typ=typesym) and
  1175. (ttypesym(p).restype.def.deftype=objectdef) and
  1176. (oo_is_forward in tobjectdef(ttypesym(p).restype.def).objectoptions) then
  1177. MessagePos1(tsym(p).fileinfo,sym_e_forward_type_not_resolved,tsym(p).realname);
  1178. end;
  1179. procedure read_declarations(islibrary : boolean);
  1180. begin
  1181. repeat
  1182. if not assigned(current_procinfo) then
  1183. internalerror(200304251);
  1184. case token of
  1185. _LABEL:
  1186. label_dec;
  1187. _CONST:
  1188. const_dec;
  1189. _TYPE:
  1190. type_dec;
  1191. _VAR:
  1192. var_dec;
  1193. _THREADVAR:
  1194. threadvar_dec;
  1195. _CONSTRUCTOR,
  1196. _DESTRUCTOR,
  1197. _FUNCTION,
  1198. _PROCEDURE,
  1199. _OPERATOR,
  1200. _CLASS:
  1201. read_proc;
  1202. _EXPORTS:
  1203. begin
  1204. if not(assigned(current_procinfo.procdef.localst)) or
  1205. (current_procinfo.procdef.localst.symtablelevel>main_program_level) or
  1206. (current_module.is_unit) then
  1207. begin
  1208. Message(parser_e_syntax_error);
  1209. consume_all_until(_SEMICOLON);
  1210. end
  1211. else if islibrary or
  1212. (target_info.system in [
  1213. system_i386_win32,
  1214. system_i386_wdosx,
  1215. system_i386_Netware,
  1216. system_i386_netwlibc,
  1217. system_arm_wince,
  1218. system_x86_64_win64,
  1219. system_ia64_win64]+system_linux) then
  1220. read_exports
  1221. else
  1222. begin
  1223. Message(parser_w_unsupported_feature);
  1224. consume(_BEGIN);
  1225. end;
  1226. end
  1227. else
  1228. begin
  1229. case idtoken of
  1230. _RESOURCESTRING :
  1231. begin
  1232. { m_class is needed, because the resourcestring
  1233. loading is in the ObjPas unit }
  1234. if (m_class in aktmodeswitches) then
  1235. resourcestring_dec
  1236. else
  1237. break;
  1238. end;
  1239. _PROPERTY:
  1240. begin
  1241. if (m_fpc in aktmodeswitches) then
  1242. property_dec
  1243. else
  1244. break;
  1245. end;
  1246. else
  1247. break;
  1248. end;
  1249. end;
  1250. end;
  1251. until false;
  1252. { check for incomplete class definitions, this is only required
  1253. for fpc modes }
  1254. if (m_fpc in aktmodeswitches) then
  1255. symtablestack.foreach_static(@check_forward_class,nil);
  1256. end;
  1257. procedure read_interface_declarations;
  1258. begin
  1259. repeat
  1260. case token of
  1261. _CONST :
  1262. const_dec;
  1263. _TYPE :
  1264. type_dec;
  1265. _VAR :
  1266. var_dec;
  1267. _THREADVAR :
  1268. threadvar_dec;
  1269. _FUNCTION,
  1270. _PROCEDURE,
  1271. _OPERATOR :
  1272. read_proc;
  1273. else
  1274. begin
  1275. case idtoken of
  1276. _RESOURCESTRING :
  1277. resourcestring_dec;
  1278. _PROPERTY:
  1279. begin
  1280. if (m_fpc in aktmodeswitches) then
  1281. property_dec
  1282. else
  1283. break;
  1284. end;
  1285. else
  1286. break;
  1287. end;
  1288. end;
  1289. end;
  1290. until false;
  1291. { check for incomplete class definitions, this is only required
  1292. for fpc modes }
  1293. if (m_fpc in aktmodeswitches) then
  1294. symtablestack.foreach_static(@check_forward_class,nil);
  1295. end;
  1296. end.