node.pas 40 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091929394959697989910010110210310410510610710810911011111211311411511611711811912012112212312412512612712812913013113213313413513613713813914014114214314414514614714814915015115215315415515615715815916016116216316416516616716816917017117217317417517617717817918018118218318418518618718818919019119219319419519619719819920020120220320420520620720820921021121221321421521621721821922022122222322422522622722822923023123223323423523623723823924024124224324424524624724824925025125225325425525625725825926026126226326426526626726826927027127227327427527627727827928028128228328428528628728828929029129229329429529629729829930030130230330430530630730830931031131231331431531631731831932032132232332432532632732832933033133233333433533633733833934034134234334434534634734834935035135235335435535635735835936036136236336436536636736836937037137237337437537637737837938038138238338438538638738838939039139239339439539639739839940040140240340440540640740840941041141241341441541641741841942042142242342442542642742842943043143243343443543643743843944044144244344444544644744844945045145245345445545645745845946046146246346446546646746846947047147247347447547647747847948048148248348448548648748848949049149249349449549649749849950050150250350450550650750850951051151251351451551651751851952052152252352452552652752852953053153253353453553653753853954054154254354454554654754854955055155255355455555655755855956056156256356456556656756856957057157257357457557657757857958058158258358458558658758858959059159259359459559659759859960060160260360460560660760860961061161261361461561661761861962062162262362462562662762862963063163263363463563663763863964064164264364464564664764864965065165265365465565665765865966066166266366466566666766866967067167267367467567667767867968068168268368468568668768868969069169269369469569669769869970070170270370470570670770870971071171271371471571671771871972072172272372472572672772872973073173273373473573673773873974074174274374474574674774874975075175275375475575675775875976076176276376476576676776876977077177277377477577677777877978078178278378478578678778878979079179279379479579679779879980080180280380480580680780880981081181281381481581681781881982082182282382482582682782882983083183283383483583683783883984084184284384484584684784884985085185285385485585685785885986086186286386486586686786886987087187287387487587687787887988088188288388488588688788888989089189289389489589689789889990090190290390490590690790890991091191291391491591691791891992092192292392492592692792892993093193293393493593693793893994094194294394494594694794894995095195295395495595695795895996096196296396496596696796896997097197297397497597697797897998098198298398498598698798898999099199299399499599699799899910001001100210031004100510061007100810091010101110121013101410151016101710181019102010211022102310241025102610271028102910301031103210331034103510361037103810391040104110421043104410451046104710481049105010511052105310541055105610571058105910601061106210631064106510661067106810691070107110721073107410751076107710781079108010811082108310841085108610871088108910901091109210931094109510961097109810991100110111021103110411051106110711081109111011111112111311141115111611171118111911201121112211231124112511261127112811291130113111321133113411351136113711381139114011411142114311441145114611471148114911501151115211531154115511561157115811591160116111621163116411651166116711681169117011711172117311741175117611771178117911801181118211831184118511861187118811891190119111921193119411951196119711981199120012011202120312041205120612071208120912101211121212131214121512161217121812191220122112221223122412251226122712281229123012311232123312341235123612371238123912401241124212431244124512461247124812491250125112521253125412551256125712581259126012611262126312641265126612671268126912701271127212731274127512761277127812791280128112821283128412851286128712881289129012911292129312941295129612971298129913001301130213031304130513061307130813091310131113121313131413151316131713181319132013211322132313241325132613271328132913301331133213331334133513361337
  1. {
  2. $Id$
  3. Copyright (c) 2000-2002 by Florian Klaempfl
  4. Basic node handling
  5. This program is free software; you can redistribute it and/or modify
  6. it under the terms of the GNU General Public License as published by
  7. the Free Software Foundation; either version 2 of the License, or
  8. (at your option) any later version.
  9. This program is distributed in the hope that it will be useful,
  10. but WITHOUT ANY WARRANTY; without even the implied warranty of
  11. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  12. GNU General Public License for more details.
  13. You should have received a copy of the GNU General Public License
  14. along with this program; if not, write to the Free Software
  15. Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  16. ****************************************************************************
  17. }
  18. unit node;
  19. {$i fpcdefs.inc}
  20. interface
  21. uses
  22. cclasses,
  23. globtype,globals,
  24. cpubase,cgbase,
  25. aasmbase,
  26. symtype,symppu;
  27. type
  28. pconstset = ^tconstset;
  29. tconstset = set of 0..255;
  30. tnodetype = (
  31. emptynode, {No node (returns nil when loading from ppu)}
  32. addn, {Represents the + operator}
  33. muln, {Represents the * operator}
  34. subn, {Represents the - operator}
  35. divn, {Represents the div operator}
  36. symdifn, {Represents the >< operator}
  37. modn, {Represents the mod operator}
  38. assignn, {Represents an assignment}
  39. loadn, {Represents the use of a variabele}
  40. rangen, {Represents a range (i.e. 0..9)}
  41. ltn, {Represents the < operator}
  42. lten, {Represents the <= operator}
  43. gtn, {Represents the > operator}
  44. gten, {Represents the >= operator}
  45. equaln, {Represents the = operator}
  46. unequaln, {Represents the <> operator}
  47. inn, {Represents the in operator}
  48. orn, {Represents the or operator}
  49. xorn, {Represents the xor operator}
  50. shrn, {Represents the shr operator}
  51. shln, {Represents the shl operator}
  52. slashn, {Represents the / operator}
  53. andn, {Represents the and operator}
  54. subscriptn, {Field in a record/object}
  55. derefn, {Dereferences a pointer}
  56. addrn, {Represents the @ operator}
  57. ordconstn, {Represents an ordinal value}
  58. typeconvn, {Represents type-conversion/typecast}
  59. calln, {Represents a call node}
  60. callparan, {Represents a parameter}
  61. realconstn, {Represents a real value}
  62. unaryminusn, {Represents a sign change (i.e. -2)}
  63. asmn, {Represents an assembler node }
  64. vecn, {Represents array indexing}
  65. pointerconstn, {Represents a pointer constant}
  66. stringconstn, {Represents a string constant}
  67. notn, {Represents the not operator}
  68. inlinen, {Internal procedures (i.e. writeln)}
  69. niln, {Represents the nil pointer}
  70. errorn, {This part of the tree could not be
  71. parsed because of a compiler error}
  72. typen, {A type name. Used for i.e. typeof(obj)}
  73. setelementn, {A set element(s) (i.e. [a,b] and also [a..b])}
  74. setconstn, {A set constant (i.e. [1,2])}
  75. blockn, {A block of statements}
  76. statementn, {One statement in a block of nodes}
  77. ifn, {An if statement}
  78. breakn, {A break statement}
  79. continuen, {A continue statement}
  80. whilerepeatn, {A while or repeat statement}
  81. forn, {A for loop}
  82. exitn, {An exit statement}
  83. withn, {A with statement}
  84. casen, {A case statement}
  85. labeln, {A label}
  86. goton, {A goto statement}
  87. tryexceptn, {A try except block}
  88. raisen, {A raise statement}
  89. tryfinallyn, {A try finally statement}
  90. onn, {For an on statement in exception code}
  91. isn, {Represents the is operator}
  92. asn, {Represents the as typecast}
  93. caretn, {Represents the ^ operator}
  94. starstarn, {Represents the ** operator exponentiation }
  95. arrayconstructorn, {Construction node for [...] parsing}
  96. arrayconstructorrangen, {Range element to allow sets in array construction tree}
  97. tempcreaten, { for temps in the result/firstpass }
  98. temprefn, { references to temps }
  99. tempdeleten, { for temps in the result/firstpass }
  100. addoptn, { added for optimizations where we cannot suppress }
  101. nothingn, {NOP, Do nothing}
  102. loadvmtaddrn, {Load the address of the VMT of a class/object}
  103. guidconstn, {A GUID COM Interface constant }
  104. rttin, {Rtti information so they can be accessed in result/firstpass}
  105. loadparentfpn { Load the framepointer of the parent for nested procedures }
  106. );
  107. const
  108. nodetype2str : array[tnodetype] of string[24] = (
  109. '<emptynode>',
  110. 'addn',
  111. 'muln',
  112. 'subn',
  113. 'divn',
  114. 'symdifn',
  115. 'modn',
  116. 'assignn',
  117. 'loadn',
  118. 'rangen',
  119. 'ltn',
  120. 'lten',
  121. 'gtn',
  122. 'gten',
  123. 'equaln',
  124. 'unequaln',
  125. 'inn',
  126. 'orn',
  127. 'xorn',
  128. 'shrn',
  129. 'shln',
  130. 'slashn',
  131. 'andn',
  132. 'subscriptn',
  133. 'derefn',
  134. 'addrn',
  135. 'ordconstn',
  136. 'typeconvn',
  137. 'calln',
  138. 'callparan',
  139. 'realconstn',
  140. 'unaryminusn',
  141. 'asmn',
  142. 'vecn',
  143. 'pointerconstn',
  144. 'stringconstn',
  145. 'notn',
  146. 'inlinen',
  147. 'niln',
  148. 'errorn',
  149. 'typen',
  150. 'setelementn',
  151. 'setconstn',
  152. 'blockn',
  153. 'statementn',
  154. 'ifn',
  155. 'breakn',
  156. 'continuen',
  157. 'whilerepeatn',
  158. 'forn',
  159. 'exitn',
  160. 'withn',
  161. 'casen',
  162. 'labeln',
  163. 'goton',
  164. 'tryexceptn',
  165. 'raisen',
  166. 'tryfinallyn',
  167. 'onn',
  168. 'isn',
  169. 'asn',
  170. 'caretn',
  171. 'starstarn',
  172. 'arrayconstructn',
  173. 'arrayconstructrangen',
  174. 'tempcreaten',
  175. 'temprefn',
  176. 'tempdeleten',
  177. 'addoptn',
  178. 'nothingn',
  179. 'loadvmtaddrn',
  180. 'guidconstn',
  181. 'rttin',
  182. 'loadparentfpn');
  183. type
  184. { all boolean field of ttree are now collected in flags }
  185. tnodeflag = (
  186. nf_swapable, { tbinop operands can be swaped }
  187. nf_swaped, { tbinop operands are swaped }
  188. nf_error,
  189. nf_copy,
  190. { general }
  191. nf_write, { Node is written to }
  192. nf_isproperty,
  193. { flags used by tcallnode }
  194. nf_return_value_used,
  195. nf_inherited,
  196. nf_anon_inherited,
  197. nf_new_call,
  198. nf_dispose_call,
  199. nf_member_call, { called with implicit methodpointer tree }
  200. { flags used by tcallparanode }
  201. nf_varargs_para, { belongs this para to varargs }
  202. { taddrnode }
  203. nf_procvarload,
  204. { tvecnode }
  205. nf_memindex,
  206. nf_memseg,
  207. nf_callunique,
  208. { tloadnode }
  209. nf_absolute,
  210. nf_load_self_pointer,
  211. { taddnode }
  212. nf_is_currency,
  213. { tassignmentnode }
  214. nf_concat_string,
  215. nf_use_strconcat,
  216. { tarrayconstructnode }
  217. nf_forcevaria,
  218. nf_novariaallowed,
  219. { ttypeconvnode }
  220. nf_explicit,
  221. { tinlinenode }
  222. nf_inlineconst
  223. );
  224. tnodeflags = set of tnodeflag;
  225. const
  226. { contains the flags which must be equal for the equality }
  227. { of nodes }
  228. flagsequal : tnodeflags = [nf_error];
  229. type
  230. tnodelist = class
  231. end;
  232. { later (for the newcg) tnode will inherit from tlinkedlist_item }
  233. tnode = class
  234. public
  235. { type of this node }
  236. nodetype : tnodetype;
  237. { type of the current code block, general/const/type }
  238. blocktype : tblock_type;
  239. { expected location of the result of this node (pass1) }
  240. expectloc : tcgloc;
  241. { the location of the result of this node (pass2) }
  242. location : tlocation;
  243. { the parent node of this is node }
  244. { this field is set by concattolist }
  245. parent : tnode;
  246. { there are some properties about the node stored }
  247. flags : tnodeflags;
  248. ppuidx : longint;
  249. { the number of registers needed to evalute the node }
  250. registers32,registersfpu : longint; { must be longint !!!! }
  251. {$ifdef SUPPORT_MMX}
  252. registersmmx,registerskni : longint;
  253. {$endif SUPPORT_MMX}
  254. resulttype : ttype;
  255. fileinfo : tfileposinfo;
  256. localswitches : tlocalswitches;
  257. {$ifdef extdebug}
  258. maxfirstpasscount,
  259. firstpasscount : longint;
  260. {$endif extdebug}
  261. constructor create(t:tnodetype);
  262. { this constructor is only for creating copies of class }
  263. { the fields are copied by getcopy }
  264. constructor createforcopy;
  265. constructor ppuload(t:tnodetype;ppufile:tcompilerppufile);virtual;
  266. destructor destroy;override;
  267. procedure ppuwrite(ppufile:tcompilerppufile);virtual;
  268. procedure buildderefimpl;virtual;
  269. procedure derefimpl;virtual;
  270. procedure derefnode;virtual;
  271. { toggles the flag }
  272. procedure toggleflag(f : tnodeflag);
  273. { the 1.1 code generator may override pass_1 }
  274. { and it need not to implement det_* then }
  275. { 1.1: pass_1 returns a value<>0 if the node has been transformed }
  276. { 2.0: runs det_resulttype and det_temp }
  277. function pass_1 : tnode;virtual;abstract;
  278. { dermines the resulttype of the node }
  279. function det_resulttype : tnode;virtual;abstract;
  280. { dermines the number of necessary temp. locations to evaluate
  281. the node }
  282. {$ifdef state_tracking}
  283. { Does optimizations by keeping track of the variable states
  284. in a procedure }
  285. function track_state_pass(exec_known:boolean):boolean;virtual;
  286. {$endif}
  287. { For a t1:=t2 tree, mark the part of the tree t1 that gets
  288. written to (normally the loadnode) as write access. }
  289. procedure mark_write;virtual;
  290. procedure det_temp;virtual;abstract;
  291. procedure pass_2;virtual;abstract;
  292. { comparing of nodes }
  293. function isequal(p : tnode) : boolean;
  294. { to implement comparisation, override this method }
  295. function docompare(p : tnode) : boolean;virtual;
  296. { gets a copy of the node }
  297. function getcopy : tnode;virtual;
  298. procedure insertintolist(l : tnodelist);virtual;
  299. { writes a node for debugging purpose, shouldn't be called }
  300. { direct, because there is no test for nil, use printnode }
  301. { to write a complete tree }
  302. procedure printnodeinfo(var t:text);
  303. procedure printnodedata(var t:text);virtual;
  304. procedure printnodetree(var t:text);virtual;
  305. procedure concattolist(l : tlinkedlist);virtual;
  306. function ischild(p : tnode) : boolean;virtual;
  307. procedure set_file_line(from : tnode);
  308. procedure set_tree_filepos(const filepos : tfileposinfo);
  309. end;
  310. tnodeclass = class of tnode;
  311. tnodeclassarray = array[tnodetype] of tnodeclass;
  312. { this node is the anchestor for all nodes with at least }
  313. { one child, you have to use it if you want to use }
  314. { true- and falselabel }
  315. punarynode = ^tunarynode;
  316. tunarynode = class(tnode)
  317. left : tnode;
  318. constructor create(t:tnodetype;l : tnode);
  319. constructor ppuload(t:tnodetype;ppufile:tcompilerppufile);override;
  320. destructor destroy;override;
  321. procedure ppuwrite(ppufile:tcompilerppufile);override;
  322. procedure buildderefimpl;override;
  323. procedure derefimpl;override;
  324. procedure derefnode;override;
  325. procedure concattolist(l : tlinkedlist);override;
  326. function ischild(p : tnode) : boolean;override;
  327. function docompare(p : tnode) : boolean;override;
  328. function getcopy : tnode;override;
  329. procedure insertintolist(l : tnodelist);override;
  330. procedure left_max;
  331. procedure printnodedata(var t:text);override;
  332. end;
  333. pbinarynode = ^tbinarynode;
  334. tbinarynode = class(tunarynode)
  335. right : tnode;
  336. constructor create(t:tnodetype;l,r : tnode);
  337. constructor ppuload(t:tnodetype;ppufile:tcompilerppufile);override;
  338. destructor destroy;override;
  339. procedure ppuwrite(ppufile:tcompilerppufile);override;
  340. procedure buildderefimpl;override;
  341. procedure derefimpl;override;
  342. procedure derefnode;override;
  343. procedure concattolist(l : tlinkedlist);override;
  344. function ischild(p : tnode) : boolean;override;
  345. function docompare(p : tnode) : boolean;override;
  346. procedure swapleftright;
  347. function getcopy : tnode;override;
  348. procedure insertintolist(l : tnodelist);override;
  349. procedure left_right_max;
  350. procedure printnodedata(var t:text);override;
  351. procedure printnodelist(var t:text);
  352. end;
  353. tbinopnode = class(tbinarynode)
  354. constructor create(t:tnodetype;l,r : tnode);virtual;
  355. function docompare(p : tnode) : boolean;override;
  356. end;
  357. var
  358. { array with all class types for tnodes }
  359. nodeclass : tnodeclassarray;
  360. function nodeppuidxget(i:longint):tnode;
  361. function ppuloadnode(ppufile:tcompilerppufile):tnode;
  362. procedure ppuwritenode(ppufile:tcompilerppufile;n:tnode);
  363. function ppuloadnodetree(ppufile:tcompilerppufile):tnode;
  364. procedure ppuwritenodetree(ppufile:tcompilerppufile;n:tnode);
  365. const
  366. printnodespacing = ' ';
  367. var
  368. { indention used when writing the tree to the screen }
  369. printnodeindention : string;
  370. procedure printnodeindent;
  371. procedure printnodeunindent;
  372. procedure printnode(var t:text;n:tnode);
  373. implementation
  374. uses
  375. cutils,verbose,ppu;
  376. const
  377. ppunodemarker = 255;
  378. {****************************************************************************
  379. Helpers
  380. ****************************************************************************}
  381. var
  382. nodeppudata : tdynamicarray;
  383. nodeppuidx : longint;
  384. procedure nodeppuidxcreate;
  385. begin
  386. nodeppudata:=tdynamicarray.create(1024);
  387. nodeppuidx:=0;
  388. end;
  389. procedure nodeppuidxfree;
  390. begin
  391. nodeppudata.free;
  392. nodeppudata:=nil;
  393. end;
  394. procedure nodeppuidxadd(n:tnode);
  395. begin
  396. if n.ppuidx<0 then
  397. internalerror(200311072);
  398. nodeppudata.seek(n.ppuidx*sizeof(pointer));
  399. nodeppudata.write(n,sizeof(pointer));
  400. end;
  401. function nodeppuidxget(i:longint):tnode;
  402. var
  403. l : longint;
  404. begin
  405. if i<0 then
  406. internalerror(200311072);
  407. nodeppudata.seek(i*sizeof(pointer));
  408. if nodeppudata.read(result,sizeof(pointer))<>sizeof(pointer) then
  409. internalerror(200311073);
  410. end;
  411. function ppuloadnode(ppufile:tcompilerppufile):tnode;
  412. var
  413. b : byte;
  414. t : tnodetype;
  415. hppuidx : longint;
  416. begin
  417. { marker }
  418. b:=ppufile.getbyte;
  419. if b<>ppunodemarker then
  420. internalerror(200208151);
  421. { load nodetype }
  422. t:=tnodetype(ppufile.getbyte);
  423. if t>high(tnodetype) then
  424. internalerror(200208152);
  425. if t<>emptynode then
  426. begin
  427. if not assigned(nodeclass[t]) then
  428. internalerror(200208153);
  429. hppuidx:=ppufile.getlongint;
  430. //writeln('load: ',nodetype2str[t]);
  431. { generate node of the correct class }
  432. result:=nodeclass[t].ppuload(t,ppufile);
  433. result.ppuidx:=hppuidx;
  434. nodeppuidxadd(result);
  435. end
  436. else
  437. result:=nil;
  438. end;
  439. procedure ppuwritenode(ppufile:tcompilerppufile;n:tnode);
  440. begin
  441. { marker, read by ppuloadnode }
  442. ppufile.putbyte(ppunodemarker);
  443. { type, read by ppuloadnode }
  444. if assigned(n) then
  445. begin
  446. if n.ppuidx=-1 then
  447. internalerror(200311071);
  448. n.ppuidx:=nodeppuidx;
  449. inc(nodeppuidx);
  450. ppufile.putbyte(byte(n.nodetype));
  451. ppufile.putlongint(n.ppuidx);
  452. //writeln('write: ',nodetype2str[n.nodetype]);
  453. n.ppuwrite(ppufile);
  454. end
  455. else
  456. ppufile.putbyte(byte(emptynode));
  457. end;
  458. function ppuloadnodetree(ppufile:tcompilerppufile):tnode;
  459. begin
  460. if ppufile.readentry<>ibnodetree then
  461. Message(unit_f_ppu_read_error);
  462. nodeppuidxcreate;
  463. result:=ppuloadnode(ppufile);
  464. result.derefnode;
  465. nodeppuidxfree;
  466. end;
  467. procedure ppuwritenodetree(ppufile:tcompilerppufile;n:tnode);
  468. begin
  469. nodeppuidx:=0;
  470. ppuwritenode(ppufile,n);
  471. ppufile.writeentry(ibnodetree);
  472. end;
  473. procedure printnodeindent;
  474. begin
  475. printnodeindention:=printnodeindention+printnodespacing;
  476. end;
  477. procedure printnodeunindent;
  478. begin
  479. delete(printnodeindention,1,length(printnodespacing));
  480. end;
  481. procedure printnode(var t:text;n:tnode);
  482. begin
  483. if assigned(n) then
  484. n.printnodetree(t)
  485. else
  486. writeln(t,printnodeindention,'nil');
  487. end;
  488. {****************************************************************************
  489. TNODE
  490. ****************************************************************************}
  491. constructor tnode.create(t:tnodetype);
  492. begin
  493. inherited create;
  494. nodetype:=t;
  495. blocktype:=block_type;
  496. { updated by firstpass }
  497. expectloc:=LOC_INVALID;
  498. { updated by secondpass }
  499. location.loc:=LOC_INVALID;
  500. { save local info }
  501. fileinfo:=aktfilepos;
  502. localswitches:=aktlocalswitches;
  503. resulttype.reset;
  504. registers32:=0;
  505. registersfpu:=0;
  506. {$ifdef SUPPORT_MMX}
  507. registersmmx:=0;
  508. {$endif SUPPORT_MMX}
  509. {$ifdef EXTDEBUG}
  510. maxfirstpasscount:=0;
  511. firstpasscount:=0;
  512. {$endif EXTDEBUG}
  513. flags:=[];
  514. ppuidx:=-1;
  515. end;
  516. constructor tnode.createforcopy;
  517. begin
  518. end;
  519. constructor tnode.ppuload(t:tnodetype;ppufile:tcompilerppufile);
  520. begin
  521. nodetype:=t;
  522. { tnode fields }
  523. blocktype:=tblock_type(ppufile.getbyte);
  524. ppufile.getposinfo(fileinfo);
  525. ppufile.getsmallset(localswitches);
  526. ppufile.gettype(resulttype);
  527. ppufile.getsmallset(flags);
  528. { updated by firstpass }
  529. expectloc:=LOC_INVALID;
  530. { updated by secondpass }
  531. location.loc:=LOC_INVALID;
  532. registers32:=0;
  533. registersfpu:=0;
  534. {$ifdef SUPPORT_MMX}
  535. registersmmx:=0;
  536. {$endif SUPPORT_MMX}
  537. {$ifdef EXTDEBUG}
  538. maxfirstpasscount:=0;
  539. firstpasscount:=0;
  540. {$endif EXTDEBUG}
  541. ppuidx:=-1;
  542. end;
  543. procedure tnode.ppuwrite(ppufile:tcompilerppufile);
  544. begin
  545. ppufile.putbyte(byte(block_type));
  546. ppufile.putposinfo(fileinfo);
  547. ppufile.putsmallset(localswitches);
  548. ppufile.puttype(resulttype);
  549. ppufile.putsmallset(flags);
  550. end;
  551. procedure tnode.buildderefimpl;
  552. begin
  553. resulttype.buildderef;
  554. end;
  555. procedure tnode.derefimpl;
  556. begin
  557. resulttype.resolve;
  558. end;
  559. procedure tnode.derefnode;
  560. begin
  561. end;
  562. procedure tnode.toggleflag(f : tnodeflag);
  563. begin
  564. if f in flags then
  565. exclude(flags,f)
  566. else
  567. include(flags,f);
  568. end;
  569. destructor tnode.destroy;
  570. begin
  571. {$ifdef EXTDEBUG}
  572. if firstpasscount>maxfirstpasscount then
  573. maxfirstpasscount:=firstpasscount;
  574. {$endif EXTDEBUG}
  575. end;
  576. procedure tnode.concattolist(l : tlinkedlist);
  577. begin
  578. end;
  579. function tnode.ischild(p : tnode) : boolean;
  580. begin
  581. ischild:=false;
  582. end;
  583. procedure tnode.mark_write;
  584. begin
  585. {$ifdef EXTDEBUG}
  586. Comment(V_Warning,'mark_write not implemented for '+nodetype2str[nodetype]);
  587. {$endif EXTDEBUG}
  588. end;
  589. procedure tnode.printnodeinfo(var t:text);
  590. begin
  591. write(t,nodetype2str[nodetype]);
  592. if assigned(resulttype.def) then
  593. write(t,', resulttype = "',resulttype.def.gettypename,'"')
  594. else
  595. write(t,', resulttype = <nil>');
  596. writeln(t,', pos = (',fileinfo.line,',',fileinfo.column,')',
  597. ', loc = ',tcgloc2str[location.loc],
  598. ', expectloc = ',tcgloc2str[expectloc],
  599. ', intregs = ',registers32,
  600. ', fpuregs = ',registersfpu);
  601. end;
  602. procedure tnode.printnodedata(var t:text);
  603. begin
  604. end;
  605. procedure tnode.printnodetree(var t:text);
  606. begin
  607. write(t,printnodeindention,'(');
  608. printnodeinfo(t);
  609. printnodeindent;
  610. printnodedata(t);
  611. printnodeunindent;
  612. writeln(t,printnodeindention,')');
  613. end;
  614. function tnode.isequal(p : tnode) : boolean;
  615. begin
  616. isequal:=
  617. (not assigned(self) and not assigned(p)) or
  618. (assigned(self) and assigned(p) and
  619. { optimized subclasses have the same nodetype as their }
  620. { superclass (for compatibility), so also check the classtype (JM) }
  621. (p.classtype=classtype) and
  622. (p.nodetype=nodetype) and
  623. (flags*flagsequal=p.flags*flagsequal) and
  624. docompare(p));
  625. end;
  626. {$ifdef state_tracking}
  627. function Tnode.track_state_pass(exec_known:boolean):boolean;
  628. begin
  629. track_state_pass:=false;
  630. end;
  631. {$endif state_tracking}
  632. function tnode.docompare(p : tnode) : boolean;
  633. begin
  634. docompare:=true;
  635. end;
  636. function tnode.getcopy : tnode;
  637. var
  638. p : tnode;
  639. begin
  640. { this is quite tricky because we need a node of the current }
  641. { node type and not one of tnode! }
  642. p:=tnodeclass(classtype).createforcopy;
  643. p.nodetype:=nodetype;
  644. p.location:=location;
  645. p.parent:=parent;
  646. p.flags:=flags;
  647. p.registers32:=registers32;
  648. p.registersfpu:=registersfpu;
  649. {$ifdef SUPPORT_MMX}
  650. p.registersmmx:=registersmmx;
  651. p.registerskni:=registerskni;
  652. {$endif SUPPORT_MMX}
  653. p.resulttype:=resulttype;
  654. p.fileinfo:=fileinfo;
  655. p.localswitches:=localswitches;
  656. {$ifdef extdebug}
  657. p.firstpasscount:=firstpasscount;
  658. {$endif extdebug}
  659. { mark node as being a copy }
  660. include(p.flags,nf_copy);
  661. { p.list:=list; }
  662. getcopy:=p;
  663. end;
  664. procedure tnode.insertintolist(l : tnodelist);
  665. begin
  666. end;
  667. procedure tnode.set_file_line(from : tnode);
  668. begin
  669. if assigned(from) then
  670. fileinfo:=from.fileinfo;
  671. end;
  672. procedure tnode.set_tree_filepos(const filepos : tfileposinfo);
  673. begin
  674. fileinfo:=filepos;
  675. end;
  676. {****************************************************************************
  677. TUNARYNODE
  678. ****************************************************************************}
  679. constructor tunarynode.create(t:tnodetype;l : tnode);
  680. begin
  681. inherited create(t);
  682. left:=l;
  683. end;
  684. constructor tunarynode.ppuload(t:tnodetype;ppufile:tcompilerppufile);
  685. begin
  686. inherited ppuload(t,ppufile);
  687. left:=ppuloadnode(ppufile);
  688. end;
  689. destructor tunarynode.destroy;
  690. begin
  691. left.free;
  692. inherited destroy;
  693. end;
  694. procedure tunarynode.ppuwrite(ppufile:tcompilerppufile);
  695. begin
  696. inherited ppuwrite(ppufile);
  697. ppuwritenode(ppufile,left);
  698. end;
  699. procedure tunarynode.buildderefimpl;
  700. begin
  701. inherited buildderefimpl;
  702. if assigned(left) then
  703. left.buildderefimpl;
  704. end;
  705. procedure tunarynode.derefimpl;
  706. begin
  707. inherited derefimpl;
  708. if assigned(left) then
  709. left.derefimpl;
  710. end;
  711. procedure tunarynode.derefnode;
  712. begin
  713. inherited derefnode;
  714. if assigned(left) then
  715. left.derefnode;
  716. end;
  717. function tunarynode.docompare(p : tnode) : boolean;
  718. begin
  719. docompare:=(inherited docompare(p) and
  720. ((left=nil) or left.isequal(tunarynode(p).left))
  721. );
  722. end;
  723. function tunarynode.getcopy : tnode;
  724. var
  725. p : tunarynode;
  726. begin
  727. p:=tunarynode(inherited getcopy);
  728. if assigned(left) then
  729. p.left:=left.getcopy
  730. else
  731. p.left:=nil;
  732. getcopy:=p;
  733. end;
  734. procedure tunarynode.insertintolist(l : tnodelist);
  735. begin
  736. end;
  737. procedure tunarynode.printnodedata(var t:text);
  738. begin
  739. inherited printnodedata(t);
  740. printnode(t,left);
  741. end;
  742. procedure tunarynode.left_max;
  743. begin
  744. registers32:=left.registers32;
  745. registersfpu:=left.registersfpu;
  746. {$ifdef SUPPORT_MMX}
  747. registersmmx:=left.registersmmx;
  748. {$endif SUPPORT_MMX}
  749. end;
  750. procedure tunarynode.concattolist(l : tlinkedlist);
  751. begin
  752. left.parent:=self;
  753. left.concattolist(l);
  754. inherited concattolist(l);
  755. end;
  756. function tunarynode.ischild(p : tnode) : boolean;
  757. begin
  758. ischild:=p=left;
  759. end;
  760. {****************************************************************************
  761. TBINARYNODE
  762. ****************************************************************************}
  763. constructor tbinarynode.create(t:tnodetype;l,r : tnode);
  764. begin
  765. inherited create(t,l);
  766. right:=r
  767. end;
  768. constructor tbinarynode.ppuload(t:tnodetype;ppufile:tcompilerppufile);
  769. begin
  770. inherited ppuload(t,ppufile);
  771. right:=ppuloadnode(ppufile);
  772. end;
  773. destructor tbinarynode.destroy;
  774. begin
  775. right.free;
  776. inherited destroy;
  777. end;
  778. procedure tbinarynode.ppuwrite(ppufile:tcompilerppufile);
  779. begin
  780. inherited ppuwrite(ppufile);
  781. ppuwritenode(ppufile,right);
  782. end;
  783. procedure tbinarynode.buildderefimpl;
  784. begin
  785. inherited buildderefimpl;
  786. if assigned(right) then
  787. right.buildderefimpl;
  788. end;
  789. procedure tbinarynode.derefimpl;
  790. begin
  791. inherited derefimpl;
  792. if assigned(right) then
  793. right.derefimpl;
  794. end;
  795. procedure tbinarynode.derefnode;
  796. begin
  797. inherited derefnode;
  798. if assigned(right) then
  799. right.derefnode;
  800. end;
  801. procedure tbinarynode.concattolist(l : tlinkedlist);
  802. begin
  803. { we could change that depending on the number of }
  804. { required registers }
  805. left.parent:=self;
  806. left.concattolist(l);
  807. left.parent:=self;
  808. left.concattolist(l);
  809. inherited concattolist(l);
  810. end;
  811. function tbinarynode.ischild(p : tnode) : boolean;
  812. begin
  813. ischild:=(p=right);
  814. end;
  815. function tbinarynode.docompare(p : tnode) : boolean;
  816. begin
  817. docompare:=(inherited docompare(p) and
  818. ((right=nil) or right.isequal(tbinarynode(p).right))
  819. );
  820. end;
  821. function tbinarynode.getcopy : tnode;
  822. var
  823. p : tbinarynode;
  824. begin
  825. p:=tbinarynode(inherited getcopy);
  826. if assigned(right) then
  827. p.right:=right.getcopy
  828. else
  829. p.right:=nil;
  830. getcopy:=p;
  831. end;
  832. procedure tbinarynode.insertintolist(l : tnodelist);
  833. begin
  834. end;
  835. procedure tbinarynode.swapleftright;
  836. var
  837. swapp : tnode;
  838. begin
  839. swapp:=right;
  840. right:=left;
  841. left:=swapp;
  842. if nf_swaped in flags then
  843. exclude(flags,nf_swaped)
  844. else
  845. include(flags,nf_swaped);
  846. end;
  847. procedure tbinarynode.left_right_max;
  848. begin
  849. if assigned(left) then
  850. begin
  851. if assigned(right) then
  852. begin
  853. registers32:=max(left.registers32,right.registers32);
  854. registersfpu:=max(left.registersfpu,right.registersfpu);
  855. {$ifdef SUPPORT_MMX}
  856. registersmmx:=max(left.registersmmx,right.registersmmx);
  857. {$endif SUPPORT_MMX}
  858. end
  859. else
  860. begin
  861. registers32:=left.registers32;
  862. registersfpu:=left.registersfpu;
  863. {$ifdef SUPPORT_MMX}
  864. registersmmx:=left.registersmmx;
  865. {$endif SUPPORT_MMX}
  866. end;
  867. end;
  868. end;
  869. procedure tbinarynode.printnodedata(var t:text);
  870. begin
  871. inherited printnodedata(t);
  872. printnode(t,right);
  873. end;
  874. procedure tbinarynode.printnodelist(var t:text);
  875. var
  876. hp : tbinarynode;
  877. begin
  878. hp:=self;
  879. while assigned(hp) do
  880. begin
  881. write(t,printnodeindention,'(');
  882. printnodeindent;
  883. hp.printnodeinfo(t);
  884. printnode(t,hp.left);
  885. printnodeunindent;
  886. writeln(t,printnodeindention,')');
  887. hp:=tbinarynode(hp.right);
  888. end;
  889. end;
  890. {****************************************************************************
  891. TBINOPYNODE
  892. ****************************************************************************}
  893. constructor tbinopnode.create(t:tnodetype;l,r : tnode);
  894. begin
  895. inherited create(t,l,r);
  896. end;
  897. function tbinopnode.docompare(p : tnode) : boolean;
  898. begin
  899. docompare:=(inherited docompare(p)) or
  900. { if that's in the flags, is p then always a tbinopnode (?) (JM) }
  901. ((nf_swapable in flags) and
  902. left.isequal(tbinopnode(p).right) and
  903. right.isequal(tbinopnode(p).left));
  904. end;
  905. end.
  906. {
  907. $Log$
  908. Revision 1.76 2003-11-23 17:38:48 peter
  909. * mark nodes that are copies
  910. Revision 1.75 2003/11/12 15:48:27 peter
  911. * fix set_varstate in for loops
  912. * fix set_varstate from case statements
  913. Revision 1.74 2003/11/10 22:02:52 peter
  914. * cross unit inlining fixed
  915. Revision 1.73 2003/10/23 14:44:07 peter
  916. * splitted buildderef and buildderefimpl to fix interface crc
  917. calculation
  918. Revision 1.72 2003/10/22 20:40:00 peter
  919. * write derefdata in a separate ppu entry
  920. Revision 1.71 2003/10/18 15:41:26 peter
  921. * made worklists dynamic in size
  922. Revision 1.70 2003/10/17 01:22:08 florian
  923. * compilation of the powerpc compiler fixed
  924. Revision 1.69 2003/10/08 19:19:45 peter
  925. * set_varstate cleanup
  926. Revision 1.68 2003/10/01 20:34:49 peter
  927. * procinfo unit contains tprocinfo
  928. * cginfo renamed to cgbase
  929. * moved cgmessage to verbose
  930. * fixed ppc and sparc compiles
  931. Revision 1.67 2003/09/28 17:55:04 peter
  932. * parent framepointer changed to hidden parameter
  933. * tloadparentfpnode added
  934. Revision 1.66 2003/09/06 22:27:08 florian
  935. * fixed web bug 2669
  936. * cosmetic fix in printnode
  937. * tobjectdef.gettypename implemented
  938. Revision 1.65 2003/09/03 15:55:01 peter
  939. * NEWRA branch merged
  940. Revision 1.64 2003/09/03 11:18:37 florian
  941. * fixed arm concatcopy
  942. + arm support in the common compiler sources added
  943. * moved some generic cg code around
  944. + tfputype added
  945. * ...
  946. Revision 1.63 2003/08/10 17:25:23 peter
  947. * fixed some reported bugs
  948. Revision 1.62 2003/05/26 21:17:17 peter
  949. * procinlinenode removed
  950. * aktexit2label removed, fast exit removed
  951. + tcallnode.inlined_pass_2 added
  952. Revision 1.61 2003/05/13 19:14:41 peter
  953. * failn removed
  954. * inherited result code check moven to pexpr
  955. Revision 1.60 2003/05/11 21:37:03 peter
  956. * moved implicit exception frame from ncgutil to psub
  957. * constructor/destructor helpers moved from cobj/ncgutil to psub
  958. Revision 1.59 2003/05/09 17:47:02 peter
  959. * self moved to hidden parameter
  960. * removed hdisposen,hnewn,selfn
  961. Revision 1.58 2003/04/25 20:59:33 peter
  962. * removed funcretn,funcretsym, function result is now in varsym
  963. and aliases for result and function name are added using absolutesym
  964. * vs_hidden parameter for funcret passed in parameter
  965. * vs_hidden fixes
  966. * writenode changed to printnode and released from extdebug
  967. * -vp option added to generate a tree.log with the nodetree
  968. * nicer printnode for statements, callnode
  969. Revision 1.57 2002/04/25 20:15:39 florian
  970. * block nodes within expressions shouldn't release the used registers,
  971. fixed using a flag till the new rg is ready
  972. Revision 1.56 2003/04/24 22:29:58 florian
  973. * fixed a lot of PowerPC related stuff
  974. Revision 1.55 2003/04/23 10:12:14 peter
  975. * allow multi pass2 changed to global boolean instead of node flag
  976. Revision 1.54 2003/04/22 23:50:23 peter
  977. * firstpass uses expectloc
  978. * checks if there are differences between the expectloc and
  979. location.loc from secondpass in EXTDEBUG
  980. Revision 1.53 2003/04/22 09:52:00 peter
  981. * mark_write implemented for default with a warning in EXTDEBUG, this
  982. is required for error recovery where the left node can be also a non
  983. writable node
  984. Revision 1.52 2003/04/10 17:57:52 peter
  985. * vs_hidden released
  986. Revision 1.51 2003/03/28 19:16:56 peter
  987. * generic constructor working for i386
  988. * remove fixed self register
  989. * esi added as address register for i386
  990. Revision 1.50 2003/03/17 16:54:41 peter
  991. * support DefaultHandler and anonymous inheritance fixed
  992. for message methods
  993. Revision 1.49 2003/01/04 15:54:03 daniel
  994. * Fixed mark_write for @ operator
  995. (can happen when compiling @procvar:=nil (Delphi mode construction))
  996. Revision 1.48 2003/01/03 21:03:02 peter
  997. * made mark_write dummy instead of abstract
  998. Revision 1.47 2003/01/03 12:15:56 daniel
  999. * Removed ifdefs around notifications
  1000. ifdefs around for loop optimizations remain
  1001. Revision 1.46 2002/12/26 18:24:33 jonas
  1002. * fixed check for whether or not a high parameter was already generated
  1003. * no type checking/conversions for invisible parameters
  1004. Revision 1.45 2002/11/28 11:17:04 florian
  1005. * loop node flags from node flags splitted
  1006. Revision 1.44 2002/10/05 00:48:57 peter
  1007. * support inherited; support for overload as it is handled by
  1008. delphi. This is only for delphi mode as it is working is
  1009. undocumented and hard to predict what is done
  1010. Revision 1.43 2002/09/07 15:25:03 peter
  1011. * old logs removed and tabs fixed
  1012. Revision 1.42 2002/09/03 16:26:26 daniel
  1013. * Make Tprocdef.defs protected
  1014. Revision 1.41 2002/09/01 13:28:38 daniel
  1015. - write_access fields removed in favor of a flag
  1016. Revision 1.40 2002/09/01 08:01:16 daniel
  1017. * Removed sets from Tcallnode.det_resulttype
  1018. + Added read/write notifications of variables. These will be usefull
  1019. for providing information for several optimizations. For example
  1020. the value of the loop variable of a for loop does matter is the
  1021. variable is read after the for loop, but if it's no longer used
  1022. or written, it doesn't matter and this can be used to optimize
  1023. the loop code generation.
  1024. Revision 1.39 2002/08/22 11:21:45 florian
  1025. + register32 is now written by tnode.dowrite
  1026. * fixed write of value of tconstnode
  1027. Revision 1.38 2002/08/19 19:36:44 peter
  1028. * More fixes for cross unit inlining, all tnodes are now implemented
  1029. * Moved pocall_internconst to po_internconst because it is not a
  1030. calling type at all and it conflicted when inlining of these small
  1031. functions was requested
  1032. Revision 1.37 2002/08/18 20:06:24 peter
  1033. * inlining is now also allowed in interface
  1034. * renamed write/load to ppuwrite/ppuload
  1035. * tnode storing in ppu
  1036. * nld,ncon,nbas are already updated for storing in ppu
  1037. Revision 1.36 2002/08/17 22:09:46 florian
  1038. * result type handling in tcgcal.pass_2 overhauled
  1039. * better tnode.dowrite
  1040. * some ppc stuff fixed
  1041. Revision 1.35 2002/08/15 19:10:35 peter
  1042. * first things tai,tnode storing in ppu
  1043. Revision 1.34 2002/08/09 19:15:41 carl
  1044. - removed newcg define
  1045. Revision 1.33 2002/07/23 12:34:30 daniel
  1046. * Readded old set code. To use it define 'oldset'. Activated by default
  1047. for ppc.
  1048. Revision 1.32 2002/07/22 11:48:04 daniel
  1049. * Sets are now internally sets.
  1050. Revision 1.31 2002/07/21 06:58:49 daniel
  1051. * Changed booleans into flags
  1052. Revision 1.30 2002/07/19 11:41:36 daniel
  1053. * State tracker work
  1054. * The whilen and repeatn are now completely unified into whilerepeatn. This
  1055. allows the state tracker to change while nodes automatically into
  1056. repeat nodes.
  1057. * Resulttypepass improvements to the notn. 'not not a' is optimized away and
  1058. 'not(a>b)' is optimized into 'a<=b'.
  1059. * Resulttypepass improvements to the whilerepeatn. 'while not a' is optimized
  1060. by removing the notn and later switchting the true and falselabels. The
  1061. same is done with 'repeat until not a'.
  1062. Revision 1.29 2002/07/14 18:00:44 daniel
  1063. + Added the beginning of a state tracker. This will track the values of
  1064. variables through procedures and optimize things away.
  1065. Revision 1.28 2002/07/01 18:46:24 peter
  1066. * internal linker
  1067. * reorganized aasm layer
  1068. Revision 1.27 2002/05/18 13:34:10 peter
  1069. * readded missing revisions
  1070. Revision 1.26 2002/05/16 19:46:39 carl
  1071. + defines.inc -> fpcdefs.inc to avoid conflicts if compiling by hand
  1072. + try to fix temp allocation (still in ifdef)
  1073. + generic constructor calls
  1074. + start of tassembler / tmodulebase class cleanup
  1075. Revision 1.24 2002/04/21 19:02:04 peter
  1076. * removed newn and disposen nodes, the code is now directly
  1077. inlined from pexpr
  1078. * -an option that will write the secondpass nodes to the .s file, this
  1079. requires EXTDEBUG define to actually write the info
  1080. * fixed various internal errors and crashes due recent code changes
  1081. Revision 1.23 2002/04/06 18:13:01 jonas
  1082. * several powerpc-related additions and fixes
  1083. Revision 1.22 2002/03/31 20:26:35 jonas
  1084. + a_loadfpu_* and a_loadmm_* methods in tcg
  1085. * register allocation is now handled by a class and is mostly processor
  1086. independent (+rgobj.pas and i386/rgcpu.pas)
  1087. * temp allocation is now handled by a class (+tgobj.pas, -i386\tgcpu.pas)
  1088. * some small improvements and fixes to the optimizer
  1089. * some register allocation fixes
  1090. * some fpuvaroffset fixes in the unary minus node
  1091. * push/popusedregisters is now called rg.save/restoreusedregisters and
  1092. (for i386) uses temps instead of push/pop's when using -Op3 (that code is
  1093. also better optimizable)
  1094. * fixed and optimized register saving/restoring for new/dispose nodes
  1095. * LOC_FPU locations now also require their "register" field to be set to
  1096. R_ST, not R_ST0 (the latter is used for LOC_CFPUREGISTER locations only)
  1097. - list field removed of the tnode class because it's not used currently
  1098. and can cause hard-to-find bugs
  1099. }