123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921922923924925926927928929930931932933934935936937938939940941942943944945946947948949950951952953954955956957958959960961962963964965966967968969970971972973974975976977978979980981982983984985986987988989990991992993994995996997998999100010011002100310041005100610071008100910101011101210131014101510161017101810191020102110221023102410251026102710281029103010311032103310341035103610371038103910401041104210431044104510461047104810491050105110521053105410551056105710581059106010611062106310641065106610671068106910701071107210731074107510761077107810791080108110821083108410851086108710881089109010911092109310941095109610971098109911001101110211031104110511061107110811091110111111121113111411151116111711181119112011211122112311241125112611271128112911301131113211331134113511361137113811391140114111421143114411451146114711481149115011511152115311541155115611571158115911601161116211631164116511661167116811691170117111721173117411751176117711781179118011811182118311841185118611871188118911901191119211931194119511961197119811991200120112021203120412051206120712081209121012111212121312141215121612171218121912201221122212231224122512261227122812291230123112321233123412351236123712381239124012411242124312441245124612471248124912501251125212531254125512561257125812591260126112621263126412651266126712681269127012711272127312741275127612771278127912801281128212831284128512861287128812891290129112921293129412951296129712981299130013011302130313041305130613071308130913101311131213131314131513161317131813191320132113221323132413251326132713281329133013311332133313341335133613371338133913401341134213431344134513461347134813491350135113521353135413551356135713581359136013611362136313641365136613671368136913701371137213731374137513761377137813791380138113821383138413851386138713881389139013911392139313941395139613971398139914001401140214031404140514061407140814091410141114121413141414151416141714181419142014211422142314241425142614271428142914301431143214331434143514361437143814391440144114421443144414451446144714481449145014511452145314541455145614571458145914601461146214631464146514661467146814691470147114721473147414751476147714781479148014811482148314841485148614871488148914901491149214931494149514961497149814991500150115021503150415051506150715081509151015111512151315141515151615171518151915201521152215231524152515261527152815291530153115321533153415351536153715381539154015411542154315441545154615471548154915501551155215531554155515561557155815591560156115621563156415651566156715681569157015711572157315741575157615771578157915801581158215831584158515861587158815891590159115921593159415951596159715981599160016011602160316041605160616071608160916101611161216131614161516161617161816191620162116221623162416251626162716281629163016311632163316341635163616371638163916401641164216431644164516461647164816491650165116521653165416551656165716581659166016611662166316641665166616671668166916701671167216731674167516761677167816791680168116821683168416851686168716881689169016911692169316941695169616971698169917001701170217031704170517061707170817091710171117121713171417151716171717181719172017211722172317241725172617271728172917301731173217331734173517361737173817391740174117421743174417451746174717481749175017511752175317541755175617571758175917601761176217631764176517661767176817691770177117721773177417751776177717781779178017811782178317841785178617871788178917901791179217931794179517961797179817991800180118021803180418051806180718081809181018111812181318141815181618171818181918201821182218231824182518261827182818291830183118321833183418351836183718381839184018411842184318441845184618471848184918501851185218531854185518561857185818591860186118621863186418651866186718681869187018711872187318741875187618771878187918801881188218831884188518861887188818891890189118921893189418951896189718981899190019011902190319041905190619071908190919101911191219131914191519161917191819191920192119221923192419251926192719281929193019311932193319341935193619371938193919401941194219431944 |
- const msgtxt_codepage=20127;
- {$ifdef Delphi}
- const msgtxt : array[0..000350] of string[240]=(
- {$else Delphi}
- const msgtxt : array[0..000350,1..240] of char=(
- {$endif Delphi}
- '01000_T_Compiler: $1'#000+
- '01001_D_Compiler OS: $1'#000+
- '01002_I_Target OS: $1'#000+
- '01003_T_Using executable path: $1'#000+
- '01004_T_Using unit path: $1'#000+
- '01005_T_Using include path: $1'#000+
- '01006_T_Using library path: $1'#000+
- '01007_T_Using object path: $1'#000+
- '01008_I_$1 lines co','mpiled, $2 sec$3'#000+
- '01009_F_No memory left'#000+
- '01010_I_Writing Resource String Table file: $1'#000+
- '01011_E_Writing Resource String Table file: $1'#000+
- '01012_I_Fatal:'#000+
- '01013_I_Error:'#000+
- '01014_I_Warning:'#000+
- '01015_I_Note:'#000+
- '01016_I_Hint:'#000+
- '01017_E_Path "$1" does not exis','t'#000+
- '01018_F_Compilation aborted'#000+
- '01019_bytes code'#000+
- '01020_bytes data'#000+
- '01021_I_$1 warning(s) issued'#000+
- '01022_I_$1 hint(s) issued'#000+
- '01023_I_$1 note(s) issued'#000+
- '01024_F_I/O error: $1'#000+
- '01025_F_Operating system error: $1'#000+
- '01026_E_Compilation raised exception i','nternally'#000+
- '01027_T_Using unit scope: $1'#000+
- '02000_F_Unexpected end of file'#000+
- '02001_F_String exceeds line'#000+
- '02002_F_illegal character "$1" ($2)'#000+
- '02003_F_Syntax error, "$1" expected but "$2" found'#000+
- '02004_TL_Start reading includefile $1'#000+
- '02005_W_Comment l','evel $1 found'#000+
- '02008_N_Ignored compiler switch "$1"'#000+
- '02009_W_Illegal compiler switch "$1"'#000+
- '02010_W_Misplaced global compiler switch, ignored'#000+
- '02011_E_Illegal char constant'#000+
- '02012_F_Cannot open file "$1"'#000+
- '02013_F_Cannot open include file "$1"'#000+
- '0201','5_E_Illegal record alignment specifier "$1"'#000+
- '02016_E_Illegal enum minimum-size specifier "$1"'#000+
- '02017_E_$ENDIF expected for $1 $2 defined in $3 line $4'#000+
- '02018_E_Syntax error while parsing a conditional compiling expression'#000+
- '02019_E_Evaluating a ','conditional compiling expression'#000+
- '02020_W_Macro contents are limited to 255 characters in length'#000+
- '02021_E_ENDIF without IF(N)DEF'#000+
- '02022_F_User defined: $1'#000+
- '02023_E_User defined: $1'#000+
- '02024_W_User defined: $1'#000+
- '02025_N_User defined: $1'#000+
- '02026_H_User ','defined: $1'#000+
- '02027_I_User defined: $1'#000+
- '02028_E_Keyword redefined as macro has no effect'#000+
- '02029_F_Macro buffer overflow while reading or expanding a macro'#000+
- '02030_W_Expanding of macros exceeds a depth of 16.'#000+
- '02031_W_compiler switches are not supp','orted in // styled comments'#000+
- '02032_DL_Handling switch "$1"'#000+
- '02033_CL_ENDIF $1 found'#000+
- '02034_CL_IFDEF $1 found, $2'#000+
- '02035_CL_IFOPT $1 found, $2'#000+
- '02036_CL_IF $1 found, $2'#000+
- '02037_CL_IFNDEF $1 found, $2'#000+
- '02038_CL_ELSE $1 found, $2'#000+
- '02039_CL_Skipping unt','il...'#000+
- '02040_I_Press <return> to continue'#000+
- '02041_W_Unsupported switch "$1"'#000+
- '02042_W_Illegal compiler directive "$1"'#000+
- '02043_TL_Back in $1'#000+
- '02044_W_Unsupported application type: "$1"'#000+
- '02045_W_APPTYPE is not supported by the target OS'#000+
- '02046_W_DESCRI','PTION is not supported by the target OS'#000+
- '02047_N_VERSION is not supported by target OS'#000+
- '02048_N_VERSION only for exes or DLLs'#000+
- '02049_W_Wrong format for VERSION directive "$1"'#000+
- '02050_E_Illegal assembler style specified "$1"'#000+
- '02051_W_ASM reader sw','itch is not possible inside asm statement, "$1"'+
- ' will be effective only for next'#000+
- '02052_E_Wrong switch toggle, use ON/OFF or +/-'#000+
- '02053_E_Resource files are not supported for this target'#000+
- '02054_W_Include environment "$1" not found in environmen','t'#000+
- '02055_E_Illegal value for FPU register limit'#000+
- '02056_W_Only one resource file is supported for this target'#000+
- '02057_W_Macro support has been turned off'#000+
- '02058_E_Illegal interface type specified. Valids are COM, CORBA or DEF'+
- 'AULT.'#000+
- '02059_W_APPID i','s only supported for PalmOS'#000+
- '02060_W_APPNAME is only supported for PalmOS'#000+
- '02061_E_Constant strings cannot be longer than 255 chars'#000+
- '02062_F_Including include files exceeds a depth of 16.'#000+
- '02063_F_Too many levels of PUSH'#000+
- '02064_E_A POP without a',' preceding PUSH'#000+
- '02065_E_Macro or compile time variable "$1" does not have any value'#000+
- '02066_E_Wrong switch toggle, use ON/OFF/DEFAULT or +/-/*'#000+
- '02067_E_Mode switch "$1" not allowed here'#000+
- '02068_E_Compile time variable or macro "$1" is not define','d.'#000+
- '02069_E_UTF-8 code greater than 65535 found'#000+
- '02070_E_Malformed UTF-8 string'#000+
- '02071_C_UTF-8 signature found, using UTF-8 encoding'#000+
- '02072_E_Compile time expression: Wanted $1 but got $2 at $3'#000+
- '02073_N_APPTYPE is not supported by the target OS'#000,
- '02074_E_Illegal optimization specified "$1"'#000+
- '02075_W_SETPEFLAGS is not supported by the target OS'#000+
- '02076_W_IMAGEBASE is not supported by the target OS'#000+
- '02077_W_MINSTACKSIZE is not supported by the target OS'#000+
- '02078_W_MAXSTACKSIZE is not supporte','d by the target OS'#000+
- '02079_E_Illegal state "$1" for $WARN directive'#000+
- '02080_E_Illegal set packing value'#000+
- '02081_W_PIC directive or switch ignored'#000+
- '02082_W_The switch "$1" is not supported by the currently selected tar'+
- 'get'#000+
- '02084_W_Framework-related ','options are only supported for Darwin/Mac '+
- 'OS X'#000+
- '02085_E_Illegal minimal floating point constant precision "$1"'#000+
- '02086_W_Overriding name of "main" procedure multiple times, was previo'+
- 'usly set to "$1"'#000+
- '02087_W_Illegal identifier "$1" for $WARN d','irective'#000+
- '02088_E_Illegal alignment directive'#000+
- '02089_F_It is not possible to include a file that starts with an UTF-8'+
- ' BOM in a module that uses a different code page'#000+
- '02090_W_Directive "$1" is ignored for the current target platform'#000+
- '02091_W_Cu','rrent system codepage "$1" is not available for the compil'+
- 'er. Switching default codepage back to "$2".'#000+
- '02092_W_SETPEOPTFLAGS is not supported by the target OS'#000+
- '02093_E_Illegal argument for SETPEFLAGS'#000+
- '02094_E_Illegal argument for SETPEOPTFLAG','S'#000+
- '02095_E_Directive $1 is not supported on this target'#000+
- '02096_W_The specified stack size is not within the valid range for the'+
- ' platform. Setting the stack size ignored.'#000+
- '02097_W_The specified HeapMax value is smaller than the HeapMin value.'+
- ' S','etting HeapMax ignored.'#000+
- '02098_E_Illegal argument for HUGEPOINTERNORMALIZATION'#000+
- '02099_E_Illegal assembler CPU instruction set specified "$1"'#000+
- '02100_W_Specified syscall convention is not useable on this target'#000+
- '02101_W_Invalid syscall convention',' specified'#000+
- '02102_W_SETPEUSERVERSION is not supported by the target OS'#000+
- '02103_W_SETPEOSVERSION is not supported by the target OS'#000+
- '02104_W_SETPESUBSYSVERSION is not supported by the target OS'#000+
- '02105_N_Changed CPU type to be consistent with speci','fied controller'#000+
- '03000_E_Parser - Syntax Error'#000+
- '03004_E_INTERRUPT procedure cannot be nested'#000+
- '03005_W_Procedure type "$1" ignored'#000+
- '03006_E_Not all declarations of "$1" are declared with OVERLOAD'#000+
- '03008_E_Duplicate exported function name "$1"'#000+
- '030','09_E_Duplicate exported function index $1'#000+
- '03010_E_Invalid index for exported function'#000+
- '03011_W_Relocatable DLL or executable $1 debug info does not work, dis'+
- 'abled.'#000+
- '03012_W_To allow debugging for win32 code you need to disable relocati'+
- 'on with',' -WN option'#000+
- '03013_E_Constructor name must be INIT'#000+
- '03014_E_Destructor name must be DONE'#000+
- '03016_E_Procedure type INLINE not supported'#000+
- '03018_W_Constructor should be public'#000+
- '03019_W_Destructor should be public'#000+
- '03020_N_Class should have one destru','ctor only'#000+
- '03021_E_Local class definitions are not allowed'#000+
- '03022_F_Anonymous class definitions are not allowed'#000+
- '03023_N_The object "$1" has no VMT'#000+
- '03024_E_Illegal parameter list'#000+
- '03026_E_Wrong number of parameters specified for call to "$1"'#000+
- '03','027_E_overloaded identifier "$1" isn'#039't a function'#000+
- '03028_E_overloaded functions have the same parameter list'#000+
- '03029_E_function header doesn'#039't match the previous declaration "$1'+
- '"'#000+
- '03030_E_function header "$1" doesn'#039't match forward : var name ch','a'+
- 'nges $2 => $3'#000+
- '03031_N_Values in enumeration types have to be ascending'#000+
- '03033_E_With cannot be used for variables in a different segment'#000+
- '03034_E_function nesting > 31'#000+
- '03035_E_range check error while evaluating constants'#000+
- '03036_W_range check ','error while evaluating constants'#000+
- '03037_E_duplicate case label'#000+
- '03038_E_Upper bound of case range is less than lower bound'#000+
- '03039_E_typed constants of classes or interfaces are not allowed'#000+
- '03040_E_functions variables of overloaded functions ar','e not allowed'#000+
- '03041_E_string length must be a value from 1 to 255'#000+
- '03042_W_use extended syntax of NEW and DISPOSE for instances of object'+
- 's'#000+
- '03043_W_use of NEW or DISPOSE for untyped pointers is meaningless'#000+
- '03044_E_use of NEW or DISPOSE is not',' possible for untyped pointers'#000+
- '03045_E_class identifier expected'#000+
- '03046_E_type identifier not allowed here'#000+
- '03047_E_method identifier expected'#000+
- '03048_E_function header doesn'#039't match any method of this class "$1'+
- '"'#000+
- '03049_DL_procedure/function $1'#000,
- '03050_E_Illegal floating point constant'#000+
- '03051_E_FAIL can be used in constructors only'#000+
- '03052_E_Destructors cannot have parameters'#000+
- '03053_E_Only class methods, class properties and class variables can b'+
- 'e referred with class references'#000+
- '03054_E_','Only class methods, class properties and class variables can'+
- ' be accessed in class methods'#000+
- '03055_E_Constant and CASE types do not match'#000+
- '03056_E_The symbol cannot be exported from a library'#000+
- '03057_W_An inherited method is hidden by "$1"'#000+
- '03058_','E_There is no method in an ancestor class to be overridden: "$'+
- '1"'#000+
- '03059_E_No member is provided to access property'#000+
- '03060_W_Stored property directive is not yet implemented'#000+
- '03061_E_Illegal symbol for property access'#000+
- '03062_E_Cannot access a pr','otected field of an object here'#000+
- '03063_E_Cannot access a private field of an object here'#000+
- '03066_E_Overridden methods must have the same return type: "$2" is ove'+
- 'rridden by "$1" which has another return type'#000+
- '03067_E_EXPORT declared functions ca','nnot be nested'#000+
- '03068_E_Methods cannot be EXPORTed'#000+
- '03069_E_Call by var for arg no. $1 has to match exactly: Got "$2" expe'+
- 'cted "$3"'#000+
- '03070_E_Class isn'#039't a parent class of the current class'#000+
- '03071_E_SELF is only allowed in methods'#000+
- '03072_E_Method','s can be only in other methods called direct with type'+
- ' identifier of the class'#000+
- '03073_E_Illegal use of '#039':'#039#000+
- '03074_E_range check error in set constructor or duplicate set element'#000+
- '03075_E_Pointer to object expected'#000+
- '03076_E_Expression must be co','nstructor call'#000+
- '03077_E_Expression must be destructor call'#000+
- '03078_E_Illegal order of record elements'#000+
- '03079_E_Expression type must be class or record type, got $1'#000+
- '03080_E_Procedures cannot return a value'#000+
- '03081_E_constructors, destructors and c','lass operators must be method'+
- 's'#000+
- '03082_E_Operator is not overloaded'#000+
- '03083_E_Impossible to overload assignment for equal types'#000+
- '03084_E_Impossible operator overload'#000+
- '03085_E_Re-raise isn'#039't possible there'#000+
- '03086_E_The extended syntax of new or dis','pose isn'#039't allowed for '+
- 'a class'#000+
- '03088_E_Procedure overloading is switched off'#000+
- '03089_E_It is not possible to overload this operator. Related overload'+
- 'able operators (if any) are: $1'#000+
- '03090_E_Comparative operator must return a boolean value'#000+
- '0309','1_E_Only virtual methods can be abstract'#000+
- '03092_F_Use of unsupported feature: "$1".'#000+
- '03093_E_The mix of different kind of objects (class, object, interface'+
- ', etc) isn'#039't allowed'#000+
- '03094_W_Unknown procedure directive had to be ignored: "$1"'#000+
- '03095_','E_$1 can be associated with only one variable'#000+
- '03096_E_absolute can only be associated with a var or const'#000+
- '03097_E_Only one variable can be initialized'#000+
- '03098_E_Abstract methods shouldn'#039't have any definition (with funct'+
- 'ion body)'#000+
- '03099_E_This ','overloaded function cannot be local (must be exported)'#000+
- '03100_W_Virtual methods are used without a constructor in "$1"'#000+
- '03101_CL_Macro defined: $1'#000+
- '03102_CL_Macro undefined: $1'#000+
- '03103_CL_Macro $1 set to $2'#000+
- '03104_I_Compiling $1'#000+
- '03105_UL_Parsing ','interface of unit $1'#000+
- '03106_UL_Parsing implementation of $1'#000+
- '03107_DL_Compiling $1 for the second time'#000+
- '03109_E_No property found to override'#000+
- '03110_E_Only one default property is allowed'#000+
- '03111_E_The default property must be an array property'#000+
- '0','3112_E_Virtual constructors are only supported in class object mode'+
- 'l'#000+
- '03113_E_No default property available'#000+
- '03114_E_The class cannot have a published section, use the {$M+} switc'+
- 'h'#000+
- '03115_E_Forward declaration of class "$1" must be resolved he','re to u'+
- 'se the class as ancestor'#000+
- '03116_E_Local operators not supported'#000+
- '03117_E_Procedure directive "$1" not allowed in interface section'#000+
- '03118_E_Procedure directive "$1" not allowed in implementation section'+
- #000+
- '03119_E_Procedure directive "$1" ','not allowed in procvar declaration'#000+
- '03120_E_Function is already declared Public/Forward "$1"'#000+
- '03121_E_Cannot use both EXPORT and EXTERNAL'#000+
- '03123_H_"$1" not yet supported inside inline procedure/function'#000+
- '03124_H_Inlining disabled'#000+
- '03125_I_Writin','g Browser log $1'#000+
- '03126_H_may be pointer dereference is missing'#000+
- '03127_F_Selected assembler reader not supported'#000+
- '03128_E_Procedure directive "$1" cannot be used with $2'#000+
- '03129_E_Calling convention doesn'#039't match forward'#000+
- '03131_E_Property cannot ','have a default value'#000+
- '03132_E_The default value of a property must be constant'#000+
- '03133_E_Symbol cannot be published, can be only a class'#000+
- '03134_E_This kind of property cannot be published'#000+
- '03136_E_An import name is required'#000+
- '03138_E_Division by z','ero'#000+
- '03139_E_Invalid floating point operation'#000+
- '03140_E_Upper bound of range is less than lower bound'#000+
- '03141_W_string "$1" is longer than "$2"'#000+
- '03142_E_string length is larger than array of char length'#000+
- '03143_E_Illegal expression after message di','rective'#000+
- '03144_E_Message handlers can take only one call by ref. parameter'#000+
- '03145_E_Duplicate message label: "$1"'#000+
- '03146_E_Self can only be an explicit parameter in methods which are me'+
- 'ssage handlers'#000+
- '03147_E_Threadvars can be only static or gl','obal'#000+
- '03148_F_Direct assembler not supported for binary output format'#000+
- '03149_W_Don'#039't load OBJPAS unit manually, use {$mode objfpc} or {$m'+
- 'ode delphi} instead'#000+
- '03150_E_OVERRIDE cannot be used in objects'#000+
- '03151_E_Data types which require initializ','ation/finalization cannot '+
- 'be used in variant records'#000+
- '03152_E_Resourcestrings can be only static or global'#000+
- '03153_E_Exit with argument cannot be used here'#000+
- '03154_E_The type of the storage symbol must be boolean'#000+
- '03155_E_This symbol isn'#039't allowe','d as storage symbol'#000+
- '03156_E_Only classes which are compiled in $M+ mode can be published'#000+
- '03157_E_Procedure directive expected'#000+
- '03158_E_The value for a property index must be of an ordinal type'#000+
- '03159_E_Procedure name too short to be exported'#000,
- '03160_E_No DEFFILE entry can be generated for unit global vars'#000+
- '03161_E_Compile without -WD option'#000+
- '03162_F_You need ObjFpc (-S2) or Delphi (-Sd) mode to compile this mod'+
- 'ule'#000+
- '03163_E_Cannot export with index under $1'#000+
- '03164_E_Exporting of varia','bles is not supported under $1'#000+
- '03165_E_Improper GUID syntax'#000+
- '03168_W_Procedure named "$1" not found that is suitable for implementi'+
- 'ng the $2.$3'#000+
- '03169_E_interface identifier expected'#000+
- '03170_E_Type "$1" cannot be used as array index type'#000+
- '03171_','E_Con- and destructors are not allowed in interfaces'#000+
- '03172_E_Access specifiers cannot be used in INTERFACEs and OBJCPROTOCO'+
- 'Ls'#000+
- '03173_E_An interface, helper or Objective-C protocol or category canno'+
- 't contain fields'#000+
- '03174_E_Cannot declare loca','l procedure as EXTERNAL'#000+
- '03175_W_Some fields coming before "$1" were not initialized'#000+
- '03176_E_Some fields coming before "$1" were not initialized'#000+
- '03177_W_Some fields coming after "$1" were not initialized'#000+
- '03178_E_VarArgs directive (or '#039'...'#039' i','n MacPas) without CDecl'+
- '/CPPDecl/MWPascal/StdCall and External'#000+
- '03179_E_Self must be a normal (call-by-value) parameter'#000+
- '03180_E_Interface "$1" has no interface identification'#000+
- '03181_E_Unknown class field or method identifier "$1"'#000+
- '03182_W_Overr','iding calling convention "$1" with "$2"'#000+
- '03183_E_Typed constants of the type "procedure of object" can only be '+
- 'initialized with NIL'#000+
- '03184_E_Default value can only be assigned to one parameter'#000+
- '03185_E_Default parameter required for "$1"'#000+
- '03186','_W_Use of unsupported feature!'#000+
- '03187_H_C arrays are passed by reference'#000+
- '03188_E_C array of const must be the last argument'#000+
- '03189_H_Type "$1" redefinition'#000+
- '03190_W_cdecl'#039'ared functions have no high parameter'#000+
- '03191_W_cdecl'#039'ared functions do no','t support open strings'#000+
- '03192_E_Cannot initialize variables declared as threadvar'#000+
- '03193_E_Message directive is only allowed in Classes'#000+
- '03194_E_Procedure or Function expected'#000+
- '03195_W_Calling convention directive ignored: "$1"'#000+
- '03196_E_REINTROD','UCE cannot be used in objects'#000+
- '03197_E_Each argument must have its own location'#000+
- '03198_E_Each argument must have an explicit location'#000+
- '03199_E_Unknown argument location'#000+
- '03200_E_32 Bit-Integer or pointer variable expected'#000+
- '03201_E_Goto statement','s are not allowed between different procedures'+
- #000+
- '03202_F_Procedure too complex, it requires too many registers'#000+
- '03203_E_Illegal expression'#000+
- '03204_E_Invalid integer expression'#000+
- '03205_E_Illegal qualifier'#000+
- '03206_E_High range limit < low range limit'#000,
- '03207_E_Exit'#039's parameter must be the name of the procedure it is u'+
- 'sed in or of a surrounding procedure'#000+
- '03208_E_Illegal assignment to for-loop variable "$1"'#000+
- '03209_E_Cannot declare local variable as EXTERNAL'#000+
- '03210_E_Procedure is already decla','red EXTERNAL'#000+
- '03211_W_Implicit uses of Variants unit'#000+
- '03212_E_Class and static methods cannot be used in INTERFACES'#000+
- '03213_E_Overflow in arithmetic operation'#000+
- '03214_E_Protected or private expected'#000+
- '03215_E_SLICE cannot be used outside of paramet','er list'#000+
- '03216_E_A DISPINTERFACE cannot have a parent class'#000+
- '03217_E_A DISPINTERFACE needs a guid'#000+
- '03218_W_Overridden methods must have a related return type. This code '+
- 'may crash, it depends on a Delphi parser bug ("$2" is overridden by "$'+
- '1" w','hich has another return type)'#000+
- '03219_E_Dispatch IDs must be ordinal constants'#000+
- '03220_E_The range of the array is too large'#000+
- '03221_E_The address cannot be taken of bit packed array elements and r'+
- 'ecord fields'#000+
- '03222_E_Dynamic arrays cannot be pac','ked'#000+
- '03223_E_Bit packed array elements and record fields cannot be used as '+
- 'loop variables'#000+
- '03224_E_VAR, TYPE and CONST are allowed only in records, objects and c'+
- 'lasses'#000+
- '03225_E_This type cannot be a generic'#000+
- '03226_W_Don'#039't load LINEINFO unit man','ually, Use the -gl compiler '+
- 'switch instead'#000+
- '03227_E_No function result type specified for function "$1"'#000+
- '03228_E_Specialization is only supported for generic types'#000+
- '03229_E_Generics cannot be used as parameters when specializing generi'+
- 'cs'#000+
- '03230','_E_Constants of objects containing a VMT are not allowed'#000+
- '03231_E_Taking the address of labels defined outside the current scope'+
- ' isn'#039't allowed'#000+
- '03233_E_Cannot initialize variables declared as external'#000+
- '03234_E_Illegal function result type'#000+
- '0323','5_E_No common type possible between "$1" and "$2"'#000+
- '03236_E_Generics without specialization cannot be used as a type for a'+
- ' variable'#000+
- '03237_W_Register list is ignored for pure assembler routines'#000+
- '03238_E_Implements property must have class or in','terface type'#000+
- '03239_E_Implements-property must implement interface of correct type, '+
- 'found "$1" expected "$2"'#000+
- '03240_E_Implements-property must have read specifier'#000+
- '03241_E_Implements-property must not have write-specifier'#000+
- '03242_E_Implements-pr','operty must not have stored-specifier'#000+
- '03243_E_Implements-property used on unimplemented interface: "$1"'#000+
- '03244_E_Floating point not supported for this target'#000+
- '03245_E_Class "$1" does not implement interface "$2"'#000+
- '03246_E_Type used by implement','s must be an interface'#000+
- '03247_E_Variables cannot be exported with a different name on this tar'+
- 'get, add the name to the declaration using the "export" directive (var'+
- 'iable name: $1, declared export name: $2)'#000+
- '03248_E_Weak external symbols are n','ot supported for the current targ'+
- 'et'#000+
- '03249_E_Forward type definition does not match'#000+
- '03250_N_Virtual method "$1" has a lower visibility ($2) than parent cl'+
- 'ass $3 ($4)'#000+
- '03251_E_Fields cannot appear after a method or property definition, st'+
- 'art a',' new visibility section first'#000+
- '03252_E_Parameters or result types cannot contain local type definitio'+
- 'ns. Use a separate type definition in a type block.'#000+
- '03253_E_ABSTRACT and SEALED conflict'#000+
- '03254_E_Cannot create a descendant of the sealed cl','ass "$1"'#000+
- '03255_E_SEALED class cannot have an ABSTRACT method'#000+
- '03256_E_Only virtual methods can be final'#000+
- '03257_E_Final method cannot be overridden: "$1"'#000+
- '03258_E_Only one message can be used per method.'#000+
- '03259_E_Invalid enumerator identifier: "','$1"'#000+
- '03260_E_Enumerator identifier required'#000+
- '03261_E_Enumerator MoveNext pattern method is not valid. Method must b'+
- 'e a function with the Boolean return type and no required arguments.'#000+
- '03262_E_Enumerator Current pattern property is not valid. ','Property m'+
- 'ust have a getter.'#000+
- '03263_E_Only one enumerator MoveNext method is allowed per class/objec'+
- 't'#000+
- '03264_E_Only one enumerator Current property is allowed per class/obje'+
- 'ct'#000+
- '03265_E_For in loop cannot be used for the type "$1"'#000+
- '03266_E_Objec','tive-C messages require their Objective-C selector name'+
- ' to be specified using the "message" directive.'#000+
- '03267_E_Objective-C does not have formal constructors nor destructors.'+
- ' Use the alloc, initXXX and dealloc messages.'#000+
- '03268_E_Message name ','is too long (max. 255 characters)'#000+
- '03269_E_Objective-C message symbol name for "$1" is too long'#000+
- '03270_H_Defining a new Objective-C root class. To derive from another '+
- 'root class (e.g., NSObject), specify it as the parent class.'#000+
- '03271_E_Object','ive-C classes cannot have published sections.'#000+
- '03272_F_This module requires an Objective-C mode switch to be compiled'+
- #000+
- '03273_E_Inherited methods can only be overridden in Objective-C and Ja'+
- 'va, add "override" (inherited method defined in $1)'#000+
- '0','3274_H_Inherited methods can only be overridden in Objective-C and '+
- 'Java, add "override" (inherited method defined in $1).'#000+
- '03275_E_Message name "$1" in inherited class is different from message'+
- ' name "$2" in current class.'#000+
- '03276_E_It is not y','et possible to make unique copies of Objective-C '+
- 'or Java types'#000+
- '03277_E_Objective-C categories and Object Pascal class helpers cannot '+
- 'be used as types'#000+
- '03278_E_Categories do not override, but replace methods. Use "reintrod'+
- 'uce" instead.'#000+
- '03279_','E_Replaced methods can only be reintroduced in Objective-C, ad'+
- 'd "reintroduce" (replaced method defined in $1).'#000+
- '03280_H_Replaced methods can only be reintroduced in Objective-C, add '+
- '"reintroduce" (replaced method defined in $1).'#000+
- '03281_E_Gett','er for implements interface must use the target'#039's de'+
- 'fault calling convention.'#000+
- '03282_E_Typed files cannot contain reference-counted types.'#000+
- '03283_E_Operator is not overloaded: $2 "$1"'#000+
- '03284_E_Operator is not overloaded: "$1" $2 "$3"'#000+
- '03285_E_E','xpected another $1 array elements'#000+
- '03286_E_String constant too long while ansistrings are disabled'#000+
- '03287_E_Type cannot be used as univ parameter because its size is unkn'+
- 'own at compile time: "$1"'#000+
- '03288_E_Only one class constructor can be decl','ared in class: "$1"'#000+
- '03289_E_Only one class destructor can be declared in class: "$1"'#000+
- '03290_E_Class constructors cannot have parameters'#000+
- '03291_E_Class destructors cannot have parameters'#000+
- '03292_F_This construct requires the \{\$modeswitch objec','tivec1\} mod'+
- 'e switch to be active'#000+
- '03293_E_Unicodechar/string constants cannot be converted to ansi/short'+
- 'string at compile-time'#000+
- '03294_E_For-in Objective-Pascal loops require \{\$modeswitch Objective'+
- 'C2\} to be active'#000+
- '03295_E_The compiler cann','ot find the NSFastEnumerationProtocol or NS'+
- 'FastEnumerationState type in the CocoaAll unit'#000+
- '03296_E_Typed constants of the type '#039'procedure is nested'#039' can '+
- 'only be initialized with NIL and global procedures/functions'#000+
- '03297_F_Declaration of gene','ric inside another generic is not allowed'+
- #000+
- '03298_E_Forward declaration "$1" must be resolved before a class can c'+
- 'onform to or implement it'#000+
- '03299_E_Record types cannot have published sections'#000+
- '03300_E_Destructors are not allowed in records or ','helpers'#000+
- '03301_E_Class methods must be static in records'#000+
- '03302_E_Parameterless constructors are not allowed in records or recor'+
- 'd/type helpers'#000+
- '03303_E_Either the result or at least one parameter must be of type "$'+
- '1"'#000+
- '03304_E_Type parameters ma','y require initialization/finalization - ca'+
- 'nnot be used in variant records'#000+
- '03305_E_Variables being declared as external cannot be in a custom sec'+
- 'tion'#000+
- '03306_E_Non-static and non-global variables cannot have a section dire'+
- 'ctive'#000+
- '03307_E_"$1" is',' not allowed in helper types'#000+
- '03308_E_Class constructors are not allowed in helpers'#000+
- '03309_E_The use of "inherited" is not allowed in a record'#000+
- '03310_E_Type declarations are not allowed in local or anonymous record'+
- 's'#000+
- '03311_E_Duplicate implement','s clause for interface "$1"'#000+
- '03312_E_Interface "$1" cannot be delegated by "$2", it already has met'+
- 'hod resolutions'#000+
- '03313_E_Interface "$1" cannot have method resolutions, "$2" already de'+
- 'legates it'#000+
- '03314_E_Invalid codepage'#000+
- '03315_E_Only fields ','(var-sections) and constants can be final in obj'+
- 'ect types'#000+
- '03316_E_Final fields are currently only supported for external classes'+
- #000+
- '03317_E_Typed constants are not allowed here, only formal constants ar'+
- 'e'#000+
- '03318_E_Constructors are not automatica','lly inherited in the JVM; exp'+
- 'licitly add a constructor that calls the inherited one if you need it'#000+
- '03319_D_Parsing internally generated code: $1'#000+
- '03320_E_This language feature is not supported on managed VM targets'#000+
- '03321_E_Calling a virtual ','constructor for the current instance insid'+
- 'e another constructor is not possible on the JVM target'#000+
- '03322_E_Overriding method "$1" cannot have a lower visibility ($2) tha'+
- 'n in parent class $3 ($4)'#000+
- '03323_E_Procedure/Function declared with call ','option NOSTACKFRAME bu'+
- 't without ASSEMBLER'#000+
- '03324_E_Procedure/Function declared with call option NOSTACKFRAME but '+
- 'local stack size is $1'#000+
- '03325_E_Cannot generate property getter/setter $1 because its name cla'+
- 'shes with existing identifier $2'#000+
- '03','326_W_Automatically generated property getter/setter $1 overrides '+
- 'the same-named getter/setter in class $2'#000+
- '03327_W_Case mismatch between declared property getter/setter $1 and a'+
- 'utomatically constructed name $2, not changing declared name'#000+
- '03','328_E_Constants declarations are not allowed in local or anonymous'+
- ' records'#000+
- '03329_E_Method declarations are not allowed in local or anonymous reco'+
- 'rds'#000+
- '03330_E_Property declarations are not allowed in local or anonymous re'+
- 'cords'#000+
- '03331_E_Class m','ember declarations are not allowed in local or anonym'+
- 'ous records'#000+
- '03332_E_Visibility section "$1" not allowed in records'#000+
- '03333_E_Directive "$1" not allowed here'#000+
- '03334_E_Assembler blocks not allowed inside generics'#000+
- '03335_E_Properties can be o','nly static, global or inside structured t'+
- 'ypes'#000+
- '03336_E_Overloaded routines have the same mangled name'#000+
- '03337_E_Default values can only be specified for value, const and cons'+
- 'tref parameters'#000+
- '03338_W_Pointer type "$1" ignored'#000+
- '03339_E_Global Gene','ric template references static symtable'#000+
- '03340_UL_Unit $1 has been already compiled meanwhile.'#000+
- '03341_E_Explicit implementation of methods for specializations of gene'+
- 'rics is not allowed'#000+
- '03342_E_Generic methods are not allowed in interfaces'#000+
- '03','343_E_Generic methods can not be virtual'#000+
- '03344_E_Dynamic packages not supported for target OS'#000+
- '03345_E_The HardFloat directive cannot be used if soft float code is g'+
- 'enerated or fpu emulation is turned on'#000+
- '03346_E_Index $1 is not a valid inter','nal function index'#000+
- '03347_W_Operator overload hidden by internal operator: "$1" $2 "$3"'#000+
- '03348_E_Thread variables inside classes or records must be class varia'+
- 'bles'#000+
- '03349_E_Only static methods and static variables can be referenced thr'+
- 'ough an ','object type'#000+
- '04000_E_Type mismatch'#000+
- '04001_E_Incompatible types: got "$1" expected "$2"'#000+
- '04002_E_Type mismatch between "$1" and "$2"'#000+
- '04003_E_Type identifier expected'#000+
- '04004_E_Variable identifier expected'#000+
- '04005_E_Integer expression expected, but ','got "$1"'#000+
- '04006_E_Boolean expression expected, but got "$1"'#000+
- '04007_E_Ordinal expression expected'#000+
- '04008_E_pointer type expected, but got "$1"'#000+
- '04009_E_class type expected, but got "$1"'#000+
- '04011_E_Can'#039't evaluate constant expression'#000+
- '04012_E_Set elem','ents are not compatible'#000+
- '04013_E_Operation not implemented for sets'#000+
- '04014_W_Automatic type conversion from floating type to COMP which is '+
- 'an integer type'#000+
- '04015_H_use DIV instead to get an integer result'#000+
- '04016_E_String types have to match exa','ctly in $V+ mode'#000+
- '04017_E_succ or pred on enums with assignments not possible'#000+
- '04018_E_Can'#039't read or write variables of this type'#000+
- '04019_E_Can'#039't use readln or writeln on typed file'#000+
- '04020_E_Can'#039't use read or write on untyped file.'#000+
- '04021_E_Type ','conflict between set elements'#000+
- '04022_W_lo/hi(dword/qword) returns the upper/lower word/dword'#000+
- '04023_E_Integer or real expression expected'#000+
- '04024_E_Wrong type "$1" in array constructor'#000+
- '04025_E_Incompatible type for arg no. $1: Got "$2", expecte','d "$3"'#000+
- '04026_E_Method (variable) and Procedure (variable) are not compatible'#000+
- '04027_E_Illegal constant passed to internal math function'#000+
- '04028_E_Can'#039't take the address of constant expressions'#000+
- '04029_E_Argument cannot be assigned to'#000+
- '04030_E_Can',#039't assign local procedure/function to procedure variabl'+
- 'e'#000+
- '04031_E_Can'#039't assign values to an address'#000+
- '04032_E_Can'#039't assign values to const variable'#000+
- '04033_E_Array type required'#000+
- '04034_E_interface type expected, but got "$1"'#000+
- '04035_H_Mixing signed',' expressions and longwords gives a 64bit result'+
- #000+
- '04036_W_Mixing signed expressions and cardinals here may cause a range'+
- ' check error'#000+
- '04037_E_Typecast has different size ($1 -> $2) in assignment'#000+
- '04038_E_enums with assignments cannot be used as',' array index'#000+
- '04039_E_Class or Object types "$1" and "$2" are not related'#000+
- '04040_W_Class types "$1" and "$2" are not related'#000+
- '04041_E_Class or interface type expected, but got "$1"'#000+
- '04042_E_Type "$1" is not completely defined'#000+
- '04043_W_String lit','eral has more characters than short string length'#000+
- '04044_W_Comparison might be always false due to range of constant and '+
- 'expression'#000+
- '04045_W_Comparison might be always true due to range of constant and e'+
- 'xpression'#000+
- '04046_W_Constructing a class ','"$1" with abstract method "$2"'#000+
- '04047_H_The left operand of the IN operator should be byte sized'#000+
- '04048_W_Type size mismatch, possible loss of data / range check error'#000+
- '04049_H_Type size mismatch, possible loss of data / range check error'#000+
- '0405','0_E_The address of an abstract method cannot be taken'#000+
- '04051_E_Assignments to formal parameters and open arrays are not possi'+
- 'ble'#000+
- '04052_E_Constant Expression expected'#000+
- '04053_E_Operation "$1" not supported for types "$2" and "$3"'#000+
- '04054_E_Illega','l type conversion: "$1" to "$2"'#000+
- '04055_H_Conversion between ordinals and pointers is not portable'#000+
- '04056_W_Conversion between ordinals and pointers is not portable'#000+
- '04057_E_Can'#039't determine which overloaded function to call'#000+
- '04058_E_Illegal coun','ter variable'#000+
- '04059_W_Converting constant real value to double for C variable argume'+
- 'nt, add explicit typecast to prevent this.'#000+
- '04060_E_Class or COM interface type expected, but got "$1"'#000+
- '04061_E_Constant packed arrays are not yet supported'#000+
- '04','062_E_Incompatible type for arg no. $1: Got "$2" expected "(Bit)Pa'+
- 'cked Array"'#000+
- '04063_E_Incompatible type for arg no. $1: Got "$2" expected "(not pack'+
- 'ed) Array"'#000+
- '04064_E_Elements of packed arrays cannot be of a type which need to be'+
- ' initialise','d'#000+
- '04065_E_Constant packed records and objects are not yet supported'#000+
- '04066_W_Arithmetic "$1" on untyped pointer is unportable to {$T+}, sug'+
- 'gest typecast'#000+
- '04076_E_Can'#039't take address of a subroutine marked as local'#000+
- '04077_E_Can'#039't export subrouti','ne marked as local from a unit'#000+
- '04078_E_Type is not automatable: "$1"'#000+
- '04079_H_Converting the operands to "$1" before doing the add could pre'+
- 'vent overflow errors.'#000+
- '04080_H_Converting the operands to "$1" before doing the subtract coul'+
- 'd prevent',' overflow errors.'#000+
- '04081_H_Converting the operands to "$1" before doing the multiply coul'+
- 'd prevent overflow errors.'#000+
- '04082_W_Converting pointers to signed integers may result in wrong com'+
- 'parison results and range errors, use an unsigned type ','instead.'#000+
- '04083_E_Interface type $1 has no valid GUID'#000+
- '04084_E_Invalid selector name "$1"'#000+
- '04085_E_Expected Objective-C method, but got $1'#000+
- '04086_E_Expected Objective-C method or constant method name'#000+
- '04087_E_No type info available for this type',#000+
- '04088_E_Ordinal or string expression expected'#000+
- '04089_E_String expression expected'#000+
- '04090_W_Converting 0 to NIL'#000+
- '04091_E_Objective-C protocol type expected, but got "$1"'#000+
- '04092_E_The type "$1" is not supported for interaction with the Object'+
- 'ive','-C and the blocks runtime.'#000+
- '04093_E_Class or objcclass type expected, but got "$1"'#000+
- '04094_E_Objcclass type expected'#000+
- '04095_W_Coerced univ parameter type in procedural variable may cause c'+
- 'rash or memory corruption: $1 to $2'#000+
- '04096_E_Type paramet','ers of specializations of generics cannot refere'+
- 'nce the currently specialized type'#000+
- '04097_E_Type parameters are not allowed on non-generic class/record/ob'+
- 'ject procedure or function'#000+
- '04098_E_Generic declaration of "$1" differs from previous de','claratio'+
- 'n'#000+
- '04099_E_Helper type expected'#000+
- '04100_E_Record type expected'#000+
- '04101_E_Derived class helper must extend a subclass of "$1" or the cla'+
- 'ss itself'#000+
- '04102_E_Derived record or type helper must extend "$1"'#000+
- '04103_E_Invalid assignment, procedure','s return no value'#000+
- '04104_W_Implicit string type conversion from "$1" to "$2"'#000+
- '04105_W_Implicit string type conversion with potential data loss from '+
- '"$1" to "$2"'#000+
- '04106_-W_Explicit string typecast from "$1" to "$2"'#000+
- '04107_-W_Explicit string type','cast with potential data loss from "$1"'+
- ' to "$2"'#000+
- '04108_W_Unicode constant cast with potential data loss'#000+
- '04109_E_range check error while evaluating constants ($1 must be betwe'+
- 'en $2 and $3)'#000+
- '04110_W_range check error while evaluating constants ','($1 must be bet'+
- 'ween $2 and $3)'#000+
- '04111_E_This type is not supported for the Default() intrinsic'#000+
- '04112_E_JVM virtual class methods cannot be static'#000+
- '04113_E_Final (class) fields can only be assigned in their class'#039' '+
- '(class) constructor'#000+
- '04114_E_I','t is not possible to typecast untyped parameters on managed'+
- ' platforms, simply assign a value to them instead.'#000+
- '04115_E_The assignment side of an expression cannot be typecasted to a'+
- ' supertype on managed platforms'#000+
- '04116_-W_The interface metho','d "$1" raises the visibility of "$2" to '+
- 'public when accessed via an interface instance'#000+
- '04117_E_The interface method "$1" has a higher visibility (public) tha'+
- 'n "$2"'#000+
- '04118_E_TYPEOF can only be used on object types with VMT'#000+
- '04119_E_It is not p','ossible to define a default value for a parameter'+
- ' of type "$1"'#000+
- '04120_E_Type "$1" cannot be extended by a type helper'#000+
- '04121_E_Procedure or function must be far in order to allow taking its'+
- ' address: "$1"'#000+
- '04122_W_Creating an instance of abstra','ct class "$1"'#000+
- '04123_E_Subroutine references cannot be declared as "of object" or "is'+
- ' nested", they can always refer to any kind of subroutine'#000+
- '04124_E_Procedure variables in that memory model do not store segment '+
- 'information'#000+
- '04125_W_The firs','t value of a set constructur range is greater then t'+
- 'he second value, so the range describes an empty set.'#000+
- '04126_E_C block reference must use CDECL or MWPASCAL calling conventio'+
- 'n.'#000+
- '05000_E_Identifier not found "$1"'#000+
- '05001_F_Internal Error in S','ymTableStack()'#000+
- '05002_E_Duplicate identifier "$1"'#000+
- '05003_H_Identifier already defined in $1 at line $2'#000+
- '05004_E_Unknown identifier "$1"'#000+
- '05005_E_Forward declaration not solved "$1"'#000+
- '05007_E_Error in type definition'#000+
- '05009_E_Forward type not resol','ved "$1"'#000+
- '05010_E_Only static variables can be used in static methods or outside'+
- ' methods'#000+
- '05012_E_Record or object or class type expected'#000+
- '05013_E_Instances of classes or objects with an abstract method are no'+
- 't allowed'#000+
- '05014_W_Label not define','d "$1"'#000+
- '05015_E_Label used but not defined "$1"'#000+
- '05016_E_Illegal label declaration'#000+
- '05017_E_GOTO and LABEL are not supported (use switch -Sg)'#000+
- '05018_E_Label not found'#000+
- '05019_E_identifier isn'#039't a label'#000+
- '05020_E_label already defined'#000+
- '05021_E_illega','l type declaration of set elements'#000+
- '05022_E_Forward class definition not resolved "$1"'#000+
- '05023_H_Unit "$1" not used in $2'#000+
- '05024_H_Parameter "$1" not used'#000+
- '05025_N_Local variable "$1" not used'#000+
- '05026_H_Value parameter "$1" is assigned but never u','sed'#000+
- '05027_N_Local variable "$1" is assigned but never used'#000+
- '05028_H_Local $1 "$2" is not used'#000+
- '05029_N_Private field "$1.$2" is never used'#000+
- '05030_N_Private field "$1.$2" is assigned but never used'#000+
- '05031_N_Private method "$1.$2" never used'#000+
- '0503','2_E_Set type expected'#000+
- '05033_W_Function result does not seem to be set'#000+
- '05034_W_Type "$1" is not aligned correctly in current record for C'#000+
- '05035_E_Unknown record field identifier "$1"'#000+
- '05036_W_Local variable "$1" does not seem to be initialize','d'#000+
- '05037_W_Variable "$1" does not seem to be initialized'#000+
- '05038_E_identifier idents no member "$1"'#000+
- '05039_H_Found declaration: $1'#000+
- '05040_E_Data element too large'#000+
- '05042_E_No matching implementation for interface method "$1" found'#000+
- '05043_W_Symbol ','"$1" is deprecated'#000+
- '05044_W_Symbol "$1" is not portable'#000+
- '05055_W_Symbol "$1" is not implemented'#000+
- '05056_E_Can'#039't create unique type from this type'#000+
- '05057_H_Local variable "$1" does not seem to be initialized'#000+
- '05058_H_Variable "$1" does not seem to',' be initialized'#000+
- '05059_W_Function result variable does not seem to be initialized'#000+
- '05060_H_Function result variable does not seem to be initialized'#000+
- '05061_W_Variable "$1" read but nowhere assigned'#000+
- '05062_H_Found abstract method: $1'#000+
- '05063_W_Symb','ol "$1" is experimental'#000+
- '05064_W_Forward declaration "$1" not resolved, assumed external'#000+
- '05065_W_Symbol "$1" is belongs to a library'#000+
- '05066_W_Symbol "$1" is deprecated: "$2"'#000+
- '05067_E_Cannot find an enumerator for the type "$1"'#000+
- '05068_E_Cannot f','ind a "MoveNext" method in enumerator "$1"'#000+
- '05069_E_Cannot find a "Current" property in enumerator "$1"'#000+
- '05070_E_Mismatch between number of declared parameters and number of c'+
- 'olons in message string.'#000+
- '05071_N_Private type "$1.$2" never used'#000+
- '05','072_N_Private const "$1.$2" never used'#000+
- '05073_N_Private property "$1.$2" never used'#000+
- '05074_W_Unit "$1" is deprecated'#000+
- '05075_W_Unit "$1" is deprecated: "$2"'#000+
- '05076_W_Unit "$1" is not portable'#000+
- '05077_W_Unit "$1" is belongs to a library'#000+
- '05078_W_Uni','t "$1" is not implemented'#000+
- '05079_W_Unit "$1" is experimental'#000+
- '05080_E_No full definition of the formally declared class "$1" is in s'+
- 'cope. Add the unit containing its full definition to the uses clause.'#000+
- '05081_E_Gotos into initialization or fin','alization blocks of units ar'+
- 'e not allowed'#000+
- '05082_E_Invalid external name "$1" for formal class "$2"'#000+
- '05083_E_Complete class definition with external name "$1" here'#000+
- '05084_W_Possible library conflict: symbol "$1" from library "$2" also '+
- 'found in',' library "$3"'#000+
- '05085_E_Cannot add implicit constructor '#039'Create'#039' because ident'+
- 'ifier already used by "$1"'#000+
- '05086_E_Cannot generate default constructor for class, because parent '+
- 'has no parameterless constructor'#000+
- '05087_D_Adding helper for $1'#000+
- '05088','_E_Found declaration: $1'#000+
- '05089_W_Local variable "$1" of a managed type does not seem to be init'+
- 'ialized'#000+
- '05090_W_Variable "$1" of a managed type does not seem to be initialize'+
- 'd'#000+
- '05091_H_Local variable "$1" of a managed type does not seem to be',' in'+
- 'itialized'#000+
- '05092_H_Variable "$1" of a managed type does not seem to be initialize'+
- 'd'#000+
- '05093_W_function result variable of a managed type does not seem to be'+
- ' initialized'#000+
- '05094_H_Function result variable of a managed type does not seem to be'+
- ' i','nitialized'#000+
- '05095_W_Duplicate identifier "$1"'#000+
- '05096_E_Generic type parameter "$1" does not match with the one in the'+
- ' declaration'#000+
- '05097_E_Generic type parameter declared as "$1"'#000+
- '05098_E_Record or object type expected'#000+
- '06009_E_Parameter list si','ze exceeds 65535 bytes'#000+
- '06012_E_File types must be var parameters'#000+
- '06013_E_The use of a far pointer isn'#039't allowed there'#000+
- '06015_E_EXPORT declared functions cannot be called'#000+
- '06016_W_Possible illegal call of constructor or destructor'#000+
- '06017_N_Inef','ficient code'#000+
- '06018_W_unreachable code'#000+
- '06020_E_Abstract methods cannot be called directly'#000+
- '06027_DL_Register $1 weight $2 $3'#000+
- '06029_DL_Stack frame is omitted'#000+
- '06031_E_Object or class methods cannot be inline.'#000+
- '06032_E_Procvar calls cannot be inl','ine.'#000+
- '06033_E_No code for inline procedure stored'#000+
- '06035_E_Element zero of an ansi/wide- or longstring cannot be accessed'+
- ', use (set)length instead'#000+
- '06037_E_Constructors or destructors cannot be called inside a '#039'wit'+
- 'h'#039' clause'#000+
- '06038_E_Cannot call',' message handler methods directly'#000+
- '06039_E_Jump in or outside of an exception block'#000+
- '06040_E_Control flow statements are not allowed in a finally block'#000+
- '06041_W_Parameters size exceeds limit for certain cpu'#039's'#000+
- '06042_W_Local variable size exceed',' limit for certain cpu'#039's'#000+
- '06043_E_Local variables size exceeds supported limit'#000+
- '06044_E_BREAK not allowed'#000+
- '06045_E_CONTINUE not allowed'#000+
- '06046_F_Unknown compilerproc "$1". Check if you use the correct run ti'+
- 'me library.'#000+
- '06047_F_Cannot find syste','m type "$1". Check if you use the correct r'+
- 'un time library.'#000+
- '06048_H_Inherited call to abstract method ignored'#000+
- '06049_E_Goto label "$1" not defined or optimized away'#000+
- '06050_F_Cannot find type "$1" in unit "$2". Check if you use the corre'+
- 'ct run',' time library.'#000+
- '06051_E_Interprocedural gotos are allowed only to outer subroutines'#000+
- '06052_E_Label must be defined in the same scope as it is declared'#000+
- '06053_E_Leaving procedures containing explicit or implicit exceptions '+
- 'frames using goto is ','not allowed'#000+
- '06054_E_In ISO mode, the mod operator is defined only for positive quo'+
- 'tient'#000+
- '06055_DL_Auto inlining: $1'#000+
- '06056_E_The function used, is not supported by the selected instructio'+
- 'n set: $1'#000+
- '06057_F_Maximum number of units ($1) reached ','for the current target'#000+
- '06058_N_Call to subroutine "$1" marked as inline is not inlined'#000+
- '06059_E_Case statement does not handle ordinal value "$1", and no else'+
- '/otherwise statement is present.'#000+
- '06060_W_Case statement does not handle all possibl','e cases'#000+
- '06061_W_The current subroutine "$1" cannot be compiled for the target '+
- 'CPU, creating dummy'#000+
- '06062_W_The target CPU does not support preserving the registers in su'+
- 'broutine "$1"'#000+
- '07000_DL_Starting $1 styled assembler parsing'#000+
- '07001_DL_Fin','ished $1 styled assembler parsing'#000+
- '07002_E_Non-label pattern contains @'#000+
- '07004_E_Error building record offset'#000+
- '07005_E_OFFSET used without identifier'#000+
- '07006_E_TYPE used without identifier'#000+
- '07007_E_Cannot use local variable or parameters here'#000+
- '070','08_E_need to use OFFSET here'#000+
- '07009_E_need to use $ here'#000+
- '07010_E_Cannot use multiple relocatable symbols'#000+
- '07011_E_Relocatable symbol can only be added'#000+
- '07012_E_Invalid constant expression'#000+
- '07013_E_Relocatable symbol is not allowed'#000+
- '07014_E_Inval','id reference syntax'#000+
- '07015_E_You cannot reach $1 from that code'#000+
- '07016_E_Local symbols/labels are not allowed as references'#000+
- '07017_E_Invalid base and index register usage'#000+
- '07018_W_Possible error in object field handling'#000+
- '07019_E_Wrong scale fact','or specified'#000+
- '07020_E_Multiple index register usage'#000+
- '07021_E_Invalid operand type'#000+
- '07022_E_Invalid string as opcode operand: $1'#000+
- '07023_W_@CODE and @DATA not supported'#000+
- '07024_E_Null label references are not allowed'#000+
- '07025_E_Divide by zero in asm e','valuator'#000+
- '07026_E_Illegal expression'#000+
- '07027_E_escape sequence ignored: $1'#000+
- '07028_E_Invalid symbol reference'#000+
- '07029_W_Fwait can cause emulation problems with emu387'#000+
- '07030_W_$1 without operand translated into $1P'#000+
- '07031_W_ENTER instruction is not ','supported by Linux kernel'#000+
- '07032_W_Calling an overload function in assembler'#000+
- '07033_E_Unsupported symbol type for operand'#000+
- '07034_E_Constant value out of bounds'#000+
- '07035_E_Error converting decimal $1'#000+
- '07036_E_Error converting octal $1'#000+
- '07037_E_Error',' converting binary $1'#000+
- '07038_E_Error converting hexadecimal $1'#000+
- '07039_H_$1 translated to $2'#000+
- '07040_W_$1 is associated to an overloaded function'#000+
- '07041_E_Cannot use SELF outside a method'#000+
- '07042_E_Cannot use OLDEBP outside a nested procedure'#000+
- '07043','_W_Procedures cannot return any value in asm code'#000+
- '07044_E_SEG not supported'#000+
- '07045_E_Size suffix and destination or source size do not match'#000+
- '07046_W_Size suffix and destination or source size do not match'#000+
- '07047_E_Assembler syntax error'#000+
- '07048','_E_Invalid combination of opcode and operands'#000+
- '07049_E_Assembler syntax error in operand'#000+
- '07050_E_Assembler syntax error in constant'#000+
- '07051_E_Invalid String expression'#000+
- '07052_W_constant with symbol $1 for address which is not on a pointer'#000+
- '07053','_E_Unrecognized opcode $1'#000+
- '07054_E_Invalid or missing opcode'#000+
- '07055_E_Invalid combination of prefix and opcode: $1'#000+
- '07056_E_Invalid combination of override and opcode: $1'#000+
- '07057_E_Too many operands on line'#000+
- '07058_W_NEAR ignored'#000+
- '07059_W_FAR ignor','ed'#000+
- '07060_E_Duplicate local symbol $1'#000+
- '07061_E_Undefined local symbol $1'#000+
- '07062_E_Unknown label identifier $1'#000+
- '07063_E_Invalid register name'#000+
- '07064_E_Invalid floating point register name'#000+
- '07066_W_Modulo not supported'#000+
- '07067_E_Invalid floating poin','t constant $1'#000+
- '07068_E_Invalid floating point expression'#000+
- '07069_E_Wrong symbol type'#000+
- '07070_E_Cannot index a local var or parameter with a register'#000+
- '07071_E_Invalid segment override expression'#000+
- '07072_W_Identifier $1 supposed external'#000+
- '07073_E_Stri','ngs not allowed as constants'#000+
- '07074_E_No type of variable specified'#000+
- '07075_E_assembler code not returned to text section'#000+
- '07076_E_Not a directive or local symbol $1'#000+
- '07077_E_Using a defined name as a local label'#000+
- '07078_E_Dollar token is used wit','hout an identifier'#000+
- '07079_W_32bit constant created for address'#000+
- '07080_N_.align is target specific, use .balign or .p2align'#000+
- '07081_E_Cannot directly access fields of pointer-based parameters'#000+
- '07082_E_Can'#039't access fields of objects/classes direct','ly'#000+
- '07083_E_No size specified and unable to determine the size of the oper'+
- 'ands'#000+
- '07084_E_Cannot use RESULT in this function'#000+
- '07086_W_"$1" without operand translated into "$1 %st,%st(1)"'#000+
- '07087_W_"$1 %st(n)" translated into "$1 %st,%st(n)"'#000+
- '07088_','W_"$1 %st(n)" translated into "$1 %st(n),%st"'#000+
- '07089_E_Char < not allowed here'#000+
- '07090_E_Char > not allowed here'#000+
- '07093_W_ALIGN not supported'#000+
- '07094_E_Inc and Dec cannot be together'#000+
- '07095_E_Invalid register list for MOVEM or FMOVEM'#000+
- '07096_E_Regli','st invalid for opcode'#000+
- '07097_E_Higher cpu mode required ($1)'#000+
- '07098_W_No size specified and unable to determine the size of the oper'+
- 'ands, using DWORD as default'#000+
- '07099_E_Syntax error while trying to parse a shifter operand'#000+
- '07100_E_Address of p','acked component is not at a byte boundary'#000+
- '07101_W_No size specified and unable to determine the size of the oper'+
- 'ands, using BYTE as default'#000+
- '07102_W_Use of +offset(%ebp) for parameters invalid here'#000+
- '07103_W_Use of +offset(%ebp) is not compati','ble with regcall conventi'+
- 'on'#000+
- '07104_W_Use of -offset(%ebp) is not recommended for local variable acc'+
- 'ess'#000+
- '07105_W_Use of -offset(%esp), access may cause a crash or value may be'+
- ' lost'#000+
- '07106_E_VMTOffset must be used in combination with a virtual m','ethod,'+
- ' and "$1" is not virtual'#000+
- '07107_E_Generating PIC, but reference is not PIC-safe'#000+
- '07108_E_All registers in a register set must be of the same kind and w'+
- 'idth'#000+
- '07109_E_A register set cannot be empty'#000+
- '07110_W_@GOTPCREL is useless and potentia','lly dangerous for local sym'+
- 'bols'#000+
- '07111_W_Constant with general purpose segment register'#000+
- '07112_E_Invalid offset value for $1'#000+
- '07113_E_Invalid register for $1'#000+
- '07114_E_SEH directives are allowed only in pure assembler procedures'#000+
- '07115_E_Directiv','e "$1" is not supported for the current target'#000+
- '07116_E_This function'#039's result location cannot be encoded directly'+
- ' in a single operand when "nostackframe" is used'#000+
- '07117_E_GOTPCREL references in Intel assembler syntax cannot contain a'+
- ' base or',' index register, and their offset must 0.'#000+
- '07118_E_The current target does not support GOTPCREL relocations'#000+
- '07119_W_Exported/global symbols should be accessed via the GOT'#000+
- '07120_W_Check size of memory operand "$1"'#000+
- '07121_W_Check size of memory',' operand "$1: memory-operand-size is $2 '+
- 'bits, but expected [$3 bits]"'#000+
- '07122_W_Check size of memory operand "$1: memory-operand-size is $2 bi'+
- 'ts, but expected [$3 bits + $4 byte offset]"'#000+
- '07123_W_Check "$1: offset of memory operand is negative',' "$2 byte"'#000+
- '07124_W_Check "$1: size of memory operand is empty, but es exists diff'+
- 'erent definitions of the memory size =>> map to $2 (smallest option)"'#000+
- '07125_E_Invalid register used in memory reference expression: "$1"'#000+
- '07126_E_SEG used witho','ut identifier'#000+
- '07127_E_@CODE and @DATA can only be used with the SEG operator'#000+
- '07128_E_Not enough space (16 bits required) for the segment constant o'+
- 'f symbol $1'#000+
- '07129_E_Invalid value of .code directive constant'#000+
- '07130_W_No size specified and u','nable to determine the size of the co'+
- 'nstant, using BYTE as default'#000+
- '07131_W_No size specified and unable to determine the size of the cons'+
- 'tant, using WORD as default'#000+
- '07132_E_Cannot override ES segment'#000+
- '07133_W_Reference is not valid here (exp','ected "$1")'#000+
- '07134_E_Address sizes do not match'#000+
- '07135_E_Instruction "POP CS" is not valid for the current target'#000+
- '07136_W_Instruction "POP CS" is not portable (it only works on 8086 an'+
- 'd 8088 CPUs)'#000+
- '07137_E_Label $1 can only be declared public ','before it'#039's defined'+
- #000+
- '07138_E_Local label $1 cannot be declared public'#000+
- '07139_E_Cannot use multiple segment overrides'#000+
- '07140_W_Multiple segment overrides (only the last one will take effect'+
- ')'#000+
- '07141_W_Segment base $1 will be generated, but is ign','ored by the CPU'+
- ' in 64-bit mode'#000+
- '08000_F_Too many assembler files'#000+
- '08001_F_Selected assembler output not supported'#000+
- '08002_F_Comp not supported'#000+
- '08003_F_Direct not support for binary writers'#000+
- '08004_E_Allocating of data is only allowed in bss secti','on'#000+
- '08005_F_No binary writer selected'#000+
- '08006_E_Asm: Opcode $1 not in table'#000+
- '08007_E_Asm: $1 invalid combination of opcode and operands'#000+
- '08008_E_Asm: 16 Bit references not supported'#000+
- '08009_E_Asm: Invalid effective address'#000+
- '08010_E_Asm: Immediate o','r reference expected'#000+
- '08011_E_Asm: $1 value exceeds bounds $2'#000+
- '08012_E_Asm: Short jump is out of range $1'#000+
- '08013_E_Asm: Undefined label $1'#000+
- '08014_E_Asm: Comp type not supported for this target'#000+
- '08015_E_Asm: Extended type not supported for this t','arget'#000+
- '08016_E_Asm: Duplicate label $1'#000+
- '08017_E_Asm: Redefined label $1'#000+
- '08018_E_Asm: First defined here'#000+
- '08019_E_Asm: Invalid register $1'#000+
- '08020_E_Asm: 16 or 32 Bit references not supported'#000+
- '08021_E_Asm: 64 Bit operands not supported'#000+
- '08022_E_Asm',': AH,BH,CH or DH cannot be used in an instruction requiri'+
- 'ng REX prefix'#000+
- '08023_E_Missing .seh_endprologue directive'#000+
- '08024_E_Function prologue exceeds 255 bytes'#000+
- '08025_E_.seh_handlerdata directive without preceding .seh_handler'#000+
- '08026_F_Relocati','on count for section $1 exceeds 65535'#000+
- '08027_N_Change of bind type of symbol $1 from $2 to $3 after use'#000+
- '08028_H_Change of bind type of symbol $1 from $2 to $3 after use'#000+
- '08029_E_Asm: 32 Bit references not supported'#000+
- '08030_F_Code segment too la','rge'#000+
- '08031_F_Data segment too large'#000+
- '08032_E_Instruction not supported by the selected instruction set'#000+
- '08033_E_Asm: conditional branch destination is out of range'#000+
- '09000_W_Source operating system redefined'#000+
- '09001_I_Assembling (pipe) $1'#000+
- '09002_E_','Can'#039't create assembler file: $1'#000+
- '09003_E_Can'#039't create object file: $1 (error code: $2)'#000+
- '09004_E_Can'#039't create archive file: $1'#000+
- '09005_E_Assembler $1 not found, switching to external assembling'#000+
- '09006_T_Using assembler: $1'#000+
- '09007_E_Error while ass','embling exitcode $1'#000+
- '09008_E_Can'#039't call the assembler, error $1 switching to external a'+
- 'ssembling'#000+
- '09009_I_Assembling $1'#000+
- '09010_I_Assembling with smartlinking $1'#000+
- '09011_W_Object $1 not found, Linking may fail !'#000+
- '09012_W_Library $1 not found, Link','ing may fail !'#000+
- '09013_E_Error while linking'#000+
- '09014_E_Can'#039't call the linker, switching to external linking'#000+
- '09015_I_Linking $1'#000+
- '09016_E_Util $1 not found, switching to external linking'#000+
- '09017_T_Using util $1'#000+
- '09018_E_Creation of Executables not su','pported'#000+
- '09019_E_Creation of Dynamic/Shared Libraries not supported'#000+
- '09035_E_Creation of Static Libraries not supported'#000+
- '09020_I_Closing script $1'#000+
- '09021_E_resource compiler "$1" not found, switching to external mode'#000+
- '09022_I_Compiling resource ','$1'#000+
- '09023_T_unit $1 cannot be statically linked, switching to smart linkin'+
- 'g'#000+
- '09024_T_unit $1 cannot be smart linked, switching to static linking'#000+
- '09025_T_unit $1 cannot be shared linked, switching to static linking'#000+
- '09026_E_unit $1 cannot be sm','art or static linked'#000+
- '09027_E_unit $1 cannot be shared or static linked'#000+
- '09028_D_Calling resource compiler "$1" with "$2" as command line'#000+
- '09029_E_Error while compiling resources'#000+
- '09030_E_Can'#039't call the resource compiler "$1", switching to exte','r'+
- 'nal mode'#000+
- '09031_E_Can'#039't open resource file "$1"'#000+
- '09032_E_Can'#039't write resource file "$1"'#000+
- '09033_N_File "$1" not found for backquoted cat command'#000+
- '09034_W_"$1" not found, this will probably cause a linking failure'#000+
- '09128_F_Can'#039't post process exec','utable $1'#000+
- '09129_F_Can'#039't open executable $1'#000+
- '09130_X_Size of Code: $1 bytes'#000+
- '09131_X_Size of initialized data: $1 bytes'#000+
- '09132_X_Size of uninitialized data: $1 bytes'#000+
- '09133_X_Stack space reserved: $1 bytes'#000+
- '09134_X_Stack space committed: $1 bytes',#000+
- '09200_F_Executable image size is too big for $1 target.'#000+
- '09201_W_Object file "$1" contains 32-bit absolute relocation to symbol'+
- ' "$2".'#000+
- '09202_E_Program segment too large (exceeds 64k by $1 bytes)'#000+
- '09203_E_Code segment "$1" too large (exceeds 6','4k by $2 bytes)'#000+
- '09204_E_Data segment "$1" too large (exceeds 64k by $2 bytes)'#000+
- '09205_E_Segment "$1" too large (exceeds 64k by $2 bytes)'#000+
- '09206_E_Group "$1" too large (exceeds 64k by $2 bytes)'#000+
- '09207_E_Cannot create a .COM file, because the pro','gram contains segm'+
- 'ent relocations'#000+
- '09208_W_Program "$1" uses experimental CheckPointer option'#000+
- '09209_E_Multiple defined symbol "$1"'#000+
- '09210_E_COMDAT selection mode $1 not supported (section: "$1")'#000+
- '09211_E_Associative section expected for COMDAT',' section "$1"'#000+
- '09212_E_COMDAT section selection mode doesn'#039't match for section "$'+
- '1" and symbol "$2"'#000+
- '09213_E_Associative COMDAT section for section "$1" not found'#000+
- '09214_D_Discarding duplicate symbol "$1" due to COMDAT selection mode'#000+
- '09215_D_D','iscarding duplicate symbol "$1" with same size due to COMDA'+
- 'T selection mode'#000+
- '09216_D_Discarding duplicate symbol "$1" with same content due to COMD'+
- 'AT selection mode'#000+
- '09217_D_Replacing duplicate symbol "$1" with smaller size due to COMDA'+
- 'T sele','ction mode'#000+
- '09218_E_Size of duplicate COMDAT symbol "$1" differs'#000+
- '09219_E_Content of duplicate COMDAT symbol "$1" differs'#000+
- '09220_E_COMDAT selection mode for symbol "$1" differs'#000+
- '09223_E_Using internal linker in cross-endian configuration is not',' s'+
- 'upported'#000+
- '10000_T_Unitsearch: $1'#000+
- '10001_T_PPU Loading $1'#000+
- '10002_U_PPU Name: $1'#000+
- '10003_U_PPU Flags: $1'#000+
- '10004_U_PPU Crc: $1'#000+
- '10005_U_PPU Time: $1'#000+
- '10006_U_PPU File too short'#000+
- '10007_U_PPU Invalid Header (no PPU at the begin)'#000+
- '10008_U_PPU Invalid Ver','sion $1'#000+
- '10009_U_PPU is compiled for another processor'#000+
- '10010_U_PPU is compiled for another target'#000+
- '10011_U_PPU Source: $1'#000+
- '10012_U_Writing $1'#000+
- '10013_F_Can'#039't Write PPU-File'#000+
- '10014_F_Error reading PPU-File'#000+
- '10015_F_unexpected end of PPU-File'#000+
- '10016_','F_Invalid PPU-File entry: $1'#000+
- '10017_F_PPU Dbx count problem'#000+
- '10018_E_Illegal unit name: $1 (expecting $2)'#000+
- '10019_F_Too much units'#000+
- '10020_F_Circular unit reference between $1 and $2'#000+
- '10021_F_Can'#039't compile unit $1, no sources available'#000+
- '10022_F_Can',#039't find unit $1 used by $2'#000+
- '10023_W_Unit $1 was not found but $2 exists'#000+
- '10024_F_Unit $1 searched but $2 found'#000+
- '10025_W_Compiling the system unit requires the -Us switch'#000+
- '10026_F_There were $1 errors compiling module, stopping'#000+
- '10027_U_Load from',' $1 ($2) unit $3'#000+
- '10028_U_Recompiling $1, checksum changed for $2'#000+
- '10029_U_Recompiling $1, source found only'#000+
- '10030_U_Recompiling unit, static lib is older than ppufile'#000+
- '10031_U_Recompiling unit, shared lib is older than ppufile'#000+
- '10032_U_Recompi','ling unit, obj and asm are older than ppufile'#000+
- '10033_U_Recompiling unit, obj is older than asm'#000+
- '10034_U_Parsing interface of $1'#000+
- '10035_U_Parsing implementation of $1'#000+
- '10036_U_Second load for unit $1'#000+
- '10037_U_PPU Check file $1 time $2'#000+
- '10040_W_Can',#039't recompile unit $1, but found modified include files'#000+
- '10041_U_File $1 is newer than the one used for creating PPU file $2'#000+
- '10042_U_Trying to use a unit which was compiled with a different FPU m'+
- 'ode'#000+
- '10043_U_Loading interface units from $1'#000+
- '100','44_U_Loading implementation units from $1'#000+
- '10045_U_Interface CRC changed for unit $1'#000+
- '10046_U_Implementation CRC changed for unit $1'#000+
- '10047_U_Finished compiling unit $1'#000+
- '10048_U_Adding dependency: $1 depends on $2'#000+
- '10049_U_No reload, is caller: ','$1'#000+
- '10050_U_No reload, already in second compile: $1'#000+
- '10051_U_Flag for reload: $1'#000+
- '10052_U_Forced reloading'#000+
- '10053_U_Previous state of $1: $2'#000+
- '10054_U_Already compiling $1, setting second compile'#000+
- '10055_U_Loading unit $1'#000+
- '10056_U_Finished loading ','unit $1'#000+
- '10057_U_Registering new unit $1'#000+
- '10058_U_Re-resolving unit $1'#000+
- '10059_U_Skipping re-resolving unit $1, still loading used units'#000+
- '10060_U_Unloading resource unit $1 (not needed)'#000+
- '10061_E_Unit $1 was compiled using a different whole progra','m optimiz'+
- 'ation feedback input ($2, $3); recompile it without wpo or use the sam'+
- 'e wpo feedback input file for this compilation invocation'#000+
- '10062_U_Indirect interface (objects/classes) CRC changed for unit $1'#000+
- '10063_U_PPU is compiled for anothe','r i8086 memory model'#000+
- '10064_U_Loading unit $1 from package $2'#000+
- '10065_F_Internal type "$1" was not found. Check if you use the correct'+
- ' run time library.'#000+
- '10066_F_Internal type "$1" does not look as expected. Check if you use'+
- ' the correct run tim','e library.'#000+
- '11000_O_$1 [options] <inputfile> [options]'#000+
- '11001_W_Only one source file supported, changing source file to compil'+
- 'e from "$1" into "$2"'#000+
- '11002_W_DEF file can be created only for OS/2'#000+
- '11003_E_nested response files are not supported'#000,
- '11004_F_No source file name in command line'#000+
- '11005_N_No option inside $1 config file'#000+
- '11006_E_Illegal parameter: $1'#000+
- '11007_H_-? writes help pages'#000+
- '11008_F_Too many config files nested'#000+
- '11009_F_Unable to open file $1'#000+
- '11010_D_Reading further optio','ns from $1'#000+
- '11011_W_Target is already set to: $1'#000+
- '11012_W_Shared libs not supported on DOS platform, reverting to static'+
- #000+
- '11013_F_In options file $1 at line $2 too many #IF(N)DEFs encountered'#000+
- '11014_F_In options file $1 at line $2 unexpected #E','NDIFs encountered'+
- #000+
- '11015_F_Open conditional at the end of the options file'#000+
- '11016_W_Debug information generation is not supported by this executab'+
- 'le'#000+
- '11017_H_Try recompiling with -dGDB'#000+
- '11018_W_You are using the obsolete switch $1'#000+
- '11019_W_You a','re using the obsolete switch $1, please use $2'#000+
- '11020_N_Switching assembler to default source writing assembler'#000+
- '11068_N_Switching assembler to default source writing assembler in cro'+
- 'ss-endian configuration'#000+
- '11021_W_Assembler output selected "','$1" is not compatible with "$2"'#000+
- '11022_W_"$1" assembler use forced'#000+
- '11026_T_Reading options from file $1'#000+
- '11027_T_Reading options from environment $1'#000+
- '11028_D_Handling option "$1"'#000+
- '11029_O_*** press enter ***'#000+
- '11030_H_Start of reading config file',' $1'#000+
- '11031_H_End of reading config file $1'#000+
- '11032_D_interpreting option "$1"'#000+
- '11036_D_interpreting firstpass option "$1"'#000+
- '11033_D_interpreting file option "$1"'#000+
- '11034_D_Reading config file "$1"'#000+
- '11035_D_found source file name "$1"'#000+
- '11039_E_Unknown',' codepage "$1"'#000+
- '11040_F_Config file $1 is a directory'#000+
- '11041_W_Assembler output selected "$1" cannot generate debug info, deb'+
- 'ugging disabled'#000+
- '11042_W_Use of ppc386.cfg is deprecated, please use fpc.cfg instead'#000+
- '11043_F_In options file $1 at lin','e $2 #ELSE directive without #IF(N)'+
- 'DEF found'#000+
- '11044_F_Option "$1" is not, or not yet, supported on the current targe'+
- 't platform'#000+
- '11045_F_The feature "$1" is not, or not yet, supported on the selected'+
- ' target platform'#000+
- '11046_N_DWARF debug informa','tion cannot be used with smart linking on'+
- ' this target, switching to static linking'#000+
- '11047_W_Option "$1" is ignored for the current target platform.'#000+
- '11048_W_Disabling external debug information because it is unsupported'+
- ' for the selected targe','t/debug format combination.'#000+
- '11049_N_DWARF debug information cannot be used with smart linking with'+
- ' external assembler, disabling static library creation.'#000+
- '11050_E_Invalid value for MACOSX_DEPLOYMENT_TARGET environment variabl'+
- 'e: $1'#000+
- '11051_E_In','valid value for IPHONEOS_DEPLOYMENT_TARGET environment var'+
- 'iable: $1'#000+
- '11052_E_You must use a FPU type of VFPV2, VFPV3 or VFPV3_D16 when usin'+
- 'g the EABIHF ABI target'#000+
- '11053_W_The selected debug format is not supported on the current targ'+
- 'et, not ','changing the current setting'#000+
- '11054_E_argument to "$1" is missing'#000+
- '11055_E_malformed parameter: $1'#000+
- '11056_W_Smart linking requires external linker'#000+
- '11057_E_Creating .COM files is not supported in the current memory mod'+
- 'el. Only the tiny memory m','odel supports making .COM files.'#000+
- '11058_W_Experimental CheckPointer option not enabled because it is inc'+
- 'omptatible with -Ur option.'#000+
- '11059_E_Unsupported target architecture -P$1, invoke the "fpc" compile'+
- 'r driver instead.'#000+
- '11060_E_Feature switc','hes are only supported while compiling the syst'+
- 'em unit.'#000+
- '11061_N_The selected debug format is not supported by the internal lin'+
- 'ker, switching to external linking'#000+
- '11062_E_You can'#039't use both options ($1) ($2) at same time.'#000+
- '12000_F_Cannot open ','whole program optimization feedback file "$1"'#000+
- '12001_D_Processing whole program optimization information in wpo feedb'+
- 'ack file "$1"'#000+
- '12002_D_Finished processing the whole program optimization information'+
- ' in wpo feedback file "$1"'#000+
- '12003_E_Expec','ted section header, but got "$2" at line $1 of wpo feed'+
- 'back file'#000+
- '12004_W_No handler registered for whole program optimization section "'+
- '$2" at line $1 of wpo feedback file, ignoring'#000+
- '12005_D_Found whole program optimization section "$1" with ','informati'+
- 'on about "$2"'#000+
- '12006_F_The selected whole program optimizations require a previously '+
- 'generated feedback file (use -Fw to specify)'#000+
- '12007_E_No collected information necessary to perform "$1" whole progr'+
- 'am optimization found'#000+
- '12008_F_Sp','ecify a whole program optimization feedback file to store '+
- 'the generated info in (using -FW)'#000+
- '12009_E_Not generating any whole program optimization information, yet'+
- ' a feedback file was specified (using -FW)'#000+
- '12010_E_Not performing any whole pr','ogram optimizations, yet an input'+
- ' feedback file was specified (using -Fw)'#000+
- '12011_D_Skipping whole program optimization section "$1", because not '+
- 'needed by the requested optimizations'#000+
- '12012_W_Overriding previously read information for "$1" fr','om feedbac'+
- 'k input file using information in section "$2"'#000+
- '12013_E_Cannot extract symbol liveness information from program when s'+
- 'tripping symbols, use -Xs-'#000+
- '12014_E_Cannot extract symbol liveness information from program when w'+
- 'hen not linking'#000,
- '12015_F_Cannot find "$1" or "$2" to extract symbol liveness informatio'+
- 'n from linked program'#000+
- '12016_E_Error during reading symbol liveness information produced by "'+
- '$1"'#000+
- '12017_F_Error executing "$1" (exitcode: $2) to extract symbol informat'+
- 'ion ','from linked program'#000+
- '12018_E_Collection of symbol liveness information can only help when u'+
- 'sing smart linking, use -CX -XX'#000+
- '12019_E_Cannot create specified whole program optimisation feedback fi'+
- 'le "$1"'#000+
- '13001_F_Can'#039't find package $1'#000+
- '13002_U_PC','P file for package $1 found'#000+
- '13003_E_Duplicate package $1'#000+
- '13004_E_Unit $1 can not be part of a package'#000+
- '13005_N_Unit $1 is implicitly imported into package $2'#000+
- '13006_F_Failed to create PCP file $2 for package $1'#000+
- '13007_F_Failed to read PCP file',' for package $1'#000+
- '13008_T_PCP loading $1'#000+
- '13009_U_PCP Name: $1'#000+
- '13010_U_PCP Flags: $1'#000+
- '13011_U_PCP Crc: $1'#000+
- '13012_U_PCP Time: $1'#000+
- '13013_U_PCP File too short'#000+
- '13014_U_PCP Invalid Header (no PCP at the begin)'#000+
- '13015_U_PCP Invalid Version $1'#000+
- '13016_U_PC','P is compiled for another processor'#000+
- '13017_U_PCP is compiled for another target'#000+
- '13018_U_Writing $1'#000+
- '13019_F_Can'#039't Write PCP-File'#000+
- '13020_F_Error reading PCP-File'#000+
- '13021_F_unexpected end of PCP-File'#000+
- '13022_F_Invalid PCP-File entry: $1'#000+
- '13023_U_Tryi','ng to use a unit which was compiled with a different FPU'+
- ' mode'#000+
- '13024_T_Packagesearch: $1'#000+
- '13025_U_Required package $1'#000+
- '13026_U_Contained unit $1'#000+
- '13027_E_Unit $1 is already contained in package $2'#000+
- '13028_W_Unit $1 is imported from indirectly req','uired package $2'#000+
- '13029_U_PPL filename $1'#000+
- '11023_Free Pascal Compiler version $FPCFULLVERSION [$FPCDATE] for $FPC'+
- 'CPU'#010+
- 'Copyright (c) 1993-2024 by Florian Klaempfl and others'#000+
- '11024_Free Pascal Compiler version $FPCVERSION'#010+
- #010+
- 'Compiler date : $','FPCDATE'#010+
- 'Compiler CPU target: $FPCCPU'#010+
- #010+
- 'Supported targets (targets marked with '#039'{*}'#039' are under develop'+
- 'ment):'#010+
- ' $OSTARGETS'#010+
- #010+
- 'Supported CPU instruction sets:'#010+
- ' $INSTRUCTIONSETS'#010+
- #010+
- 'Supported FPU instruction sets:'#010+
- ' $FPUINSTRUCTIONSETS'#010+
- #010+
- 'Supported in','line assembler modes:'#010+
- ' $ASMMODES'#010+
- #010+
- 'Recognized compiler and RTL features:'#010+
- ' $FEATURELIST'#010+
- #010+
- 'Recognized modeswitches:'#010+
- ' $MODESWITCHES'#010+
- #010+
- 'Supported ABI targets:'#010+
- ' $ABITARGETS'#010+
- #010+
- 'Supported Optimizations:'#010+
- ' $OPTIMIZATIONS'#010+
- #010+
- 'Supported Whole Program Opti','mizations:'#010+
- ' All'#010+
- ' $WPOPTIMIZATIONS'#010+
- #010+
- 'Code Generation Backend'#010+
- ' $CODEGENERATIONBACKEND'#010+
- #010+
- 'Supported Microcontroller types:$\n $CONTROLLERTYPES$\n'#010+
- 'This program comes under the GNU General Public Licence'#010+
- 'For more information read COPYING.v2'#010+
- #010+
- 'Pl','ease report bugs in our bug tracker on:'#010+
- ' http://bugs.freepascal.org'#010+
- #010+
- 'More information may be found on our WWW pages (including directions'#010+
- 'for mailing lists useful for asking questions or discussing potential'#010+
- 'new features, et','c.):'#010+
- ' http://www.freepascal.org'#000+
- '11025_F*0*_Only options valid for the default or selected platform are'+
- ' listed.'#010+
- '**0*_Put + after a boolean switch option to enable it, - to disable it'+
- '.'#010+
- '**1@<x>_Read compiler options from <x> in',' addition to the default fp'+
- 'c.cfg'#010+
- '**1a_The compiler does not delete the generated assembler file'#010+
- '**2a5_Don'#039't generate Big Obj COFF files for GNU Binutils older tha'+
- 'n 2.25 (Windows, NativeNT)'#010+
- '**2al_List sourcecode lines in assembler file'#010+
- '**2an','_List node info in assembler file (-dEXTDEBUG compiler)'#010+
- '**2ao_Add an extra option to external assembler call (ignored for inte'+
- 'rnal)'#010+
- '*L2ap_Use pipes instead of creating temporary assembler files'#010+
- '**2ar_List register allocation/release info in',' assembler file'#010+
- '**2at_List temp allocation/release info in assembler file'#010+
- '**1A<x>_Output format:'#010+
- '**2Adefault_Use default assembler'#010+
- '3*2Aas_Assemble using GNU AS'#010+
- '3*2Amacho_Mach-O (Darwin, Intel 32 bit) using internal writer'#010+
- '8*2Anasm_Assemble ','using Nasm'#010+
- '8*2Anasmobj_Assemble using Nasm'#010+
- '3*2Anasm_Assemble using Nasm'#010+
- '3*2Anasmcoff_COFF (Go32v2) file using Nasm'#010+
- '3*2Anasmelf_ELF32 (Linux) file using Nasm'#010+
- '3*2Anasmwin32_Win32 object file using Nasm'#010+
- '3*2Anasmwdosx_Win32/WDOSX object file us','ing Nasm'#010+
- '3*2Anasmdarwin_macho32 object file using Nasm (experimental)'#010+
- '3*2Awasm_Obj file using Wasm (Watcom)'#010+
- '3*2Anasmobj_Obj file using Nasm'#010+
- '3*2Amasm_Obj file using Masm (Microsoft)'#010+
- '3*2Atasm_Obj file using Tasm (Borland)'#010+
- '3*2Aelf_ELF (Linux) ','using internal writer'#010+
- '3*2Acoff_COFF (Go32v2) using internal writer'#010+
- '3*2Apecoff_PE-COFF (Win32) using internal writer'#010+
- '3*2Ayasm_Assemble using Yasm (experimental)'#010+
- '4*2Aas_Assemble using GNU AS'#010+
- '4*2Agas_Assemble using GNU GAS'#010+
- '4*2Agas-darwin_Assem','ble darwin Mach-O64 using GNU GAS'#010+
- '4*2Amasm_Win64 object file using ml64 (Microsoft)'#010+
- '4*2Apecoff_PE-COFF (Win64) using internal writer'#010+
- '4*2Aelf_ELF (Linux-64bit) using internal writer'#010+
- '4*2Ayasm_Assemble using Yasm (experimental)'#010+
- '4*2Anasm_Assemb','le using Nasm (experimental)'#010+
- '4*2Anasmwin64_Assemble Win64 object file using Nasm (experimental)'#010+
- '4*2Anasmelf_Assemble Linux-64bit object file using Nasm (experimental)'+
- #010+
- '4*2Anasmdarwin_Assemble darwin macho64 object file using Nasm (experim'+
- 'ent','al)'#010+
- '6*2Aas_Unix o-file using GNU AS'#010+
- '6*2Agas_GNU Motorola assembler'#010+
- '6*2Amit_MIT Syntax (old GAS)'#010+
- '6*2Amot_Standard Motorola assembler'#010+
- 'A*2Aas_Assemble using GNU AS'#010+
- 'P*2Aas_Assemble using GNU AS'#010+
- 'S*2Aas_Assemble using GNU AS'#010+
- '**1b_Generate browser',' info'#010+
- '**2bl_Generate local symbol info'#010+
- '**1B_Build all modules'#010+
- '**1C<x>_Code generation options:'#010+
- '**2C3_Turn on ieee error checking for constants'#010+
- '**2Ca<x>_Select ABI; see fpc -i or fpc -ia for possible values'#010+
- '**2Cb_Generate code for a big-endi','an variant of the target architect'+
- 'ure'#010+
- '**2Cc<x>_Set default calling convention to <x>'#010+
- '**2CD_Create also dynamic library (not supported)'#010+
- '**2Ce_Compilation with emulated floating point opcodes'#010+
- '**2Cf<x>_Select fpu instruction set to use; see fp','c -i or fpc -if fo'+
- 'r possible values'#010+
- '**2CF<x>_Minimal floating point constant precision (default, 32, 64)'#010+
- '**2Cg_Generate PIC code'#010+
- '**2Ch<n>[,m]_<n> bytes min heap size (between 1023 and 67107840) and o'+
- 'ptionally [m] max heap size'#010+
- '**2Ci_IO-chec','king'#010+
- 'A*2CI<x>_Select instruction set on ARM: ARM or THUMB'#010+
- '**2Cn_Omit linking stage'#010+
- 'P*2CN_Generate nil-pointer checks (AIX-only)'#010+
- '**2Co_Check overflow of integer operations'#010+
- '**2CO_Check for possible overflow of integer operations'#010+
- '**2Cp<x>_Sele','ct instruction set; see fpc -i or fpc -ic for possible '+
- 'values'#010+
- '**2CP<x>=<y>_ packing settings'#010+
- '**3CPPACKSET=<y>_ <y> set allocation: 0, 1 or DEFAULT or NORMAL, 2, 4 '+
- 'and 8'#010+
- '**3CPPACKENUM=<y>_ <y> enum packing: 0, 1, 2 and 4 or DEFAULT or NORMA'+
- 'L',#010+
- '**3CPPACKRECORD=<y>_ <y> record packing: 0 or DEFAULT or NORMAL, 1, 2,'+
- ' 4, 8, 16 and 32'#010+
- '**2Cr_Range checking'#010+
- '**2CR_Verify object method call validity'#010+
- '**2Cs<n>_Set stack checking size to <n>'#010+
- '**2Ct_Stack checking (for testing only, see manual',')'#010+
- '8*2CT<x>_Target-specific code generation options'#010+
- '3*2CT<x>_Target-specific code generation options'#010+
- '4*2CT<x>_Target-specific code generation options'#010+
- 'p*2CT<x>_Target-specific code generation options'#010+
- 'P*2CT<x>_Target-specific code generation o','ptions'#010+
- 'J*2CT<x>_Target-specific code generation options'#010+
- 'A*2CT<x>_Target-specific code generation options'#010+
- 'p*3CTsmalltoc_ Generate smaller TOCs at the expense of execution speed'+
- ' (AIX)'#010+
- 'P*3CTsmalltoc_ Generate smaller TOCs at the expense of exe','cution spe'+
- 'ed (AIX)'#010+
- 'J*3CTautogetterprefix=X_ Automatically create getters for properties '+
- 'with prefix X (empty string disables)'#010+
- 'J*3CTautosetterprefix=X_ Automatically create setters for properties '+
- 'with prefix X (empty string disables)'#010+
- '8*3CT','cld_ Emit a CLD instruction before using the x8'+
- '6 string instructions'#010+
- '3*3CTcld_ Emit a CLD instruction before using the x86 '+
- 'string instructions'#010+
- '4*3CTcld_ Emit a CLD instruction before using the',' x8'+
- '6 string instructions'#010+
- '8*3CTfarprocspushoddbp_ Increment BP before pushing it in the pr'+
- 'ologue of far functions'#010+
- 'J*3CTcompactintarrayinit_ Generate smaller (but potentially slower) co'+
- 'de for initializing integer array constants'#010+
- 'J*3CTen','umfieldinit_ Initialize enumeration fields in construct'+
- 'ors to enumtype(0), after calling inherited constructors'#010+
- 'J*3CTinitlocals_ Initialize local variables that trigger a JV'+
- 'M bytecode verification error if used uninitialized ','(slows down code'+
- ')'#010+
- 'J*3CTlowercaseprocstart_ Lowercase the first character of procedure/f'+
- 'unction/method names'#010+
- 'A*3CTthumbinterworking_ Generate Thumb interworking-safe code if possi'+
- 'ble'#010+
- 'J*2Cv_Var/out parameter copy-out checking'#010+
- '**2CX_Create al','so smartlinked library'#010+
- '**1d<x>_Defines the symbol <x>'#010+
- '**1D_Generate a DEF file'#010+
- '**2DD<x>_Set the date string returned by %DATE% to x, it is not checke'+
- 'd for being a valid date string'#010+
- '**2Dd<x>_Set description to <x>'#010+
- '**2DT<x>_Set the time strin','g returned by %TIME% to x, it is not chec'+
- 'ked for being a valid time string'#010+
- '**2Dv<x>_Set DLL version to <x>'#010+
- '*O2Dw_PM application'#010+
- '**1e<x>_Set path to executable'#010+
- '**1E_Same as -Cn'#010+
- '**1fPIC_Same as -Cg'#010+
- '**1F<x>_Set file names and paths:'#010+
- '**2Fa<x>[,','y]_(for a program) load units <x> and [y] before uses is p'+
- 'arsed'#010+
- '**2Fc<x>_Set input codepage to <x>'#010+
- '**2FC<x>_Set RC compiler binary name to <x>'#010+
- '**2Fd_Disable the compiler'#039's internal directory cache'#010+
- '**2FD<x>_Set the directory where to search ','for compiler utilities'#010+
- '**2Fe<x>_Redirect error output to <x>'#010+
- '**2Ff<x>_Add <x> to framework path (Darwin only)'#010+
- '**2FE<x>_Set exe/unit output path to <x>'#010+
- '**2Fi<x>_Add <x> to include path'#010+
- '**2Fl<x>_Add <x> to library path'#010+
- '**2FL<x>_Use <x> as dyn','amic linker'#010+
- '**2Fm<x>_Load unicode conversion table from <x>.txt in the compiler di'+
- 'r'#010+
- '**2FM<x>_Set the directory where to search for unicode binary files'#010+
- '**2FN<x>_Add <x> to list of default unit scopes (namespaces)'#010+
- '**2Fo<x>_Add <x> to object ','path'#010+
- '**2Fr<x>_Load error message file <x>'#010+
- '**2FR<x>_Set resource (.res) linker to <x>'#010+
- '**2Fu<x>_Add <x> to unit path'#010+
- '**2FU<x>_Set unit output path to <x>, overrides -FE'#010+
- '**2FW<x>_Store generated whole-program optimization feedback in <x>'#010+
- '**2Fw','<x>_Load previously stored whole-program optimization feedback '+
- 'from <x>'#010+
- '*g1g_Generate debug information (default format for target)'#010+
- '*g2gc_Generate checks for pointers (experimental, only available on so'+
- 'me targets, might generate false posit','ive)'#010+
- '*g2gh_Use heaptrace unit (for memory leak/corruption debugging)'#010+
- '*g2gl_Use line info unit (show more info with backtraces)'#010+
- '*g2gm_Generate Microsoft CodeView debug information (experimental)'#010+
- '*g2go<x>_Set debug information options'#010+
- '*g3godw','arfsets_ Enable DWARF '#039'set'#039' type debug information (b'+
- 'reaks gdb < 6.5)'#010+
- '*g3gostabsabsincludes_ Store absolute/full include file paths in Stabs'+
- #010+
- '*g3godwarfmethodclassprefix_ Prefix method names in DWARF with class n'+
- 'ame'#010+
- '*g3godwarfcpp_ Simulate C','++ debug information in DWARF'#010+
- '*g3godwarfomflinnum_ Generate line number information in OMF LINNUM re'+
- 'cords in MS LINK format in addition to the DWARF debug information (Op'+
- 'en Watcom Debugger/Linker compatibility)'#010+
- '*g2gp_Preserve case in stabs ','symbol names'#010+
- '*g2gs_Generate Stabs debug information'#010+
- '*g2gt_Trash local variables (to detect uninitialized uses; multiple '#039+
- 't'#039' changes the trashing value)'#010+
- '*g2gv_Generates programs traceable with Valgrind'#010+
- '*g2gw_Generate DWARFv2 debug informatio','n (same as -gw2)'#010+
- '*g2gw2_Generate DWARFv2 debug information'#010+
- '*g2gw3_Generate DWARFv3 debug information'#010+
- '*g2gw4_Generate DWARFv4 debug information (experimental)'#010+
- '**1i_Information'#010+
- '**2iD_Return compiler date'#010+
- '**2iSO_Return compiler OS'#010+
- '**2iSP_Retur','n compiler host processor'#010+
- '**2iTO_Return target OS'#010+
- '**2iTP_Return target processor'#010+
- '**2iV_Return short compiler version'#010+
- '**2iW_Return full compiler version'#010+
- '**2ia_Return list of supported ABI targets'#010+
- '**2ib_Return the used code generation backend',' type'#010+
- '**2ic_Return list of supported CPU instruction sets'#010+
- '**2if_Return list of supported FPU instruction sets'#010+
- '**2ii_Return list of supported inline assembler modes'#010+
- '**2im_Return list of supported modeswitches'#010+
- '**2io_Return list of supported o','ptimizations'#010+
- '**2ir_Return list of recognized compiler and RTL features'#010+
- '**2it_Return list of supported targets'#010+
- '**2iu_Return list of supported microcontroller types'#010+
- '**2iw_Return list of supported whole program optimizations'#010+
- '**1I<x>_Add <x> to',' include path'#010+
- '**1k<x>_Pass <x> to the linker'#010+
- '**1l_Write logo'#010+
- '**1M<x>_Set language mode to <x> / enable modeswitch <x> (see option -'+
- 'im)'#010+
- '**2Mfpc_Free Pascal dialect (default)'#010+
- '**2Mobjfpc_FPC mode with Object Pascal support'#010+
- '**2Mdelphi_Delphi 7 ','compatibility mode'#010+
- '**2Mtp_TP/BP 7.0 compatibility mode'#010+
- '**2Mmacpas_Macintosh Pascal dialects compatibility mode'#010+
- '**2Miso_ISO 7185 mode'#010+
- '**2Mextendedpascal_ISO 10206 mode'#010+
- '**2Mdelphiunicode_Delphi 2009 and later compatibility mode'#010+
- '**2*_Each mode',' (as listed above) enables its default set of modeswit'+
- 'ches.'#010+
- '**2*_Other modeswitches are disabled and need to be enabled one by ano'+
- 'ther.'#010+
- '**1M<x>-_Disable modeswitch <x> (see option -im)'#010+
- '**1n_Do not read the default config files'#010+
- '**1o<x>_Chang','e the name of the executable produced to <x>'#010+
- '**1O<x>_Optimizations:'#010+
- '**2O-_Disable optimizations'#010+
- '**2O1_Level 1 optimizations (quick and debugger friendly)'#010+
- '**2O2_Level 2 optimizations (-O1 + quick optimizations)'#010+
- '**2O3_Level 3 optimizations (-','O2 + slow optimizations)'#010+
- '**2O4_Level 4 optimizations (-O3 + optimizations which might have unex'+
- 'pected side effects)'#010+
- '**2Oa<x>=<y>_Set alignment'#010+
- '**2Oo[NO]<x>_Enable or disable optimizations; see fpc -i or fpc -io fo'+
- 'r possible values'#010+
- '**2Op<x>_','Set target cpu for optimizing; see fpc -i or fpc -ic for po'+
- 'ssible values'#010+
- '**2OW<x>_Generate whole-program optimization feedback for optimization'+
- ' <x>; see fpc -i or fpc -iw for possible values'#010+
- '**2Ow<x>_Perform whole-program optimization <x>; ','see fpc -i or fpc -'+
- 'iw for possible values'#010+
- '**2Os_Optimize for size rather than speed'#010+
- '**1pg_Generate profile code for gprof (defines FPC_PROFILE)'#010+
- 'F*1P<x>_Target CPU / compiler related options:'#010+
- 'F*2PB_Show default compiler binary'#010+
- 'F*2PP_Show def','ault target cpu'#010+
- 'F*2P<x>_Set target CPU (aarch64,arm,avr,i386,i8086,jvm,m68k,mips,mipse'+
- 'l,powerpc,powerpc64,sparc,x86_64)'#010+
- '**1R<x>_Assembler reading style:'#010+
- '**2Rdefault_Use default assembler for target'#010+
- '3*2Ratt_Read AT&T style assembler'#010+
- '3*2Rinte','l_Read Intel style assembler'#010+
- '4*2Ratt_Read AT&T style assembler'#010+
- '4*2Rintel_Read Intel style assembler'#010+
- '8*2Ratt_Read AT&T style assembler'#010+
- '8*2Rintel_Read Intel style assembler'#010+
- '6*2RMOT_Read Motorola style assembler'#010+
- '**1S<x>_Syntax options:'#010+
- '**2S2_S','ame as -Mobjfpc'#010+
- '**2Sc_Support operators like C (*=,+=,/= and -=)'#010+
- '**2Sa_Turn on assertions'#010+
- '**2Sd_Same as -Mdelphi'#010+
- '**2Se<x>_Error options. <x> is a combination of the following:'#010+
- '**3*_<n> : Compiler halts after the <n> errors (default is 1)'#010+
- '**','3*_w : Compiler also halts after warnings'#010+
- '**3*_n : Compiler also halts after notes'#010+
- '**3*_h : Compiler also halts after hints'#010+
- '**2Sf_Enable certain features in compiler and RTL; see fpc -i or fpc -'+
- 'ir for possible values)'#010+
- '**2Sg_Enable LABEL and',' GOTO (default in -Mtp and -Mdelphi)'#010+
- '**2Sh_Use reference counted strings (ansistring by default) instead of'+
- ' shortstrings'#010+
- '**2Si_Turn on inlining of procedures/functions declared as "inline"'#010+
- '**2Sj_Allows typed constants to be writeable (defau','lt in all modes)'#010+
- '**2Sk_Load fpcylix unit'#010+
- '**2SI<x>_Set interface style to <x>'#010+
- '**3SIcom_COM compatible interface (default)'#010+
- '**3SIcorba_CORBA compatible interface'#010+
- '**2Sm_Support macros like C (global)'#010+
- '**2So_Same as -Mtp'#010+
- '**2Sr_Transparent file na','mes in ISO mode'#010+
- '**2Ss_Constructor name must be init (destructor must be done)'#010+
- '**2Sv_Support vector processing (use CPU vector extensions if availabl'+
- 'e)'#010+
- '**2Sx_Enable exception keywords (default in Delphi/ObjFPC modes)'#010+
- '**2Sy_@<pointer> returns',' a typed pointer, same as $T+'#010+
- '**1s_Do not call assembler and linker'#010+
- '**2sh_Generate script to link on host'#010+
- '**2st_Generate script to link on target'#010+
- '**2sr_Skip register allocation phase (use with -alr)'#010+
- '**1T<x>_Target operating system:'#010+
- '3*2Tandr','oid_Android'#010+
- '3*2Taros_AROS'#010+
- '3*2Tbeos_BeOS'#010+
- '3*2Tdarwin_Darwin/Mac OS X'#010+
- '3*2Tembedded_Embedded'#010+
- '3*2Temx_OS/2 via EMX (including EMX/RSX extender)'#010+
- '3*2Tfreebsd_FreeBSD'#010+
- '3*2Tgo32v2_Version 2 of DJ Delorie DOS extender'#010+
- '3*2Thaiku_Haiku'#010+
- '3*2Tiphonesim_iPh','oneSimulator from iOS SDK 3.2+ (older versions: -Td'+
- 'arwin)'#010+
- '3*2Tlinux_Linux'#010+
- '3*2Tnativent_Native NT API (experimental)'#010+
- '3*2Tnetbsd_NetBSD'#010+
- '3*2Tnetware_Novell Netware Module (clib)'#010+
- '3*2Tnetwlibc_Novell Netware Module (libc)'#010+
- '3*2Topenbsd_OpenBSD'#010+
- '3*2','Tos2_OS/2 / eComStation'#010+
- '3*2Tsymbian_Symbian OS'#010+
- '3*2Tsolaris_Solaris'#010+
- '3*2Twatcom_Watcom compatible DOS extender'#010+
- '3*2Twdosx_WDOSX DOS extender'#010+
- '3*2Twin32_Windows 32 Bit'#010+
- '3*2Twince_Windows CE'#010+
- '4*2Taros_AROS'#010+
- '4*2Tdarwin_Darwin/Mac OS X'#010+
- '4*2Tdragonfly_D','ragonFly BSD'#010+
- '4*2Tembedded_Embedded'#010+
- '4*2Tfreebsd_FreeBSD'#010+
- '4*2Tiphonesim_iPhoneSimulator'#010+
- '4*2Tlinux_Linux'#010+
- '4*2Tnetbsd_NetBSD'#010+
- '4*2Topenbsd_OpenBSD'#010+
- '4*2Tsolaris_Solaris'#010+
- '4*2Twin64_Win64 (64 bit Windows systems)'#010+
- '6*2Tamiga_Commodore Amiga'#010+
- '6*2Tatari_Atar','i ST/STe/TT'#010+
- '6*2Tembedded_Embedded'#010+
- '6*2Tlinux_Linux'#010+
- '6*2Tnetbsd_NetBSD'#010+
- '6*2Tmacosclassic_Classic Mac OS'#010+
- '6*2Tpalmos_PalmOS'#010+
- '8*2Tembedded_Embedded'#010+
- '8*2Tmsdos_MS-DOS (and compatible)'#010+
- '8*2Twin16_Windows 16 Bit'#010+
- 'A*2Tandroid_Android'#010+
- 'A*2Taros_AROS'#010+
- 'A*2Temb','edded_Embedded'#010+
- 'A*2Tgba_Game Boy Advance'#010+
- 'A*2Tios_iOS'#010+
- 'A*2Tlinux_Linux'#010+
- 'A*2Tnds_Nintendo DS'#010+
- 'A*2Tnetbsd_NetBSD'#010+
- 'A*2Tpalmos_PalmOS'#010+
- 'A*2Tsymbian_Symbian'#010+
- 'A*2Twince_Windows CE'#010+
- 'a*2Tdarwin_Darwin/Mac OS X'#010+
- 'a*2Tios_iOS'#010+
- 'a*2Tlinux_Linux'#010+
- 'J*2Tandroid_Android'#010,
- 'J*2Tjava_Java'#010+
- 'm*2Tandroid_Android'#010+
- 'm*2Tembedded_Embedded'#010+
- 'm*2Tlinux_Linux'#010+
- 'M*2Tembedded_Embedded'#010+
- 'M*2Tlinux_Linux'#010+
- 'P*2Taix_AIX'#010+
- 'P*2Tamiga_AmigaOS'#010+
- 'P*2Tdarwin_Darwin/Mac OS X'#010+
- 'P*2Tembedded_Embedded'#010+
- 'P*2Tlinux_Linux'#010+
- 'P*2Tmacosclassic_Classic Mac OS'#010+
- 'P*2','Tmorphos_MorphOS'#010+
- 'P*2Tnetbsd_NetBSD'#010+
- 'P*2Twii_Wii'#010+
- 'p*2Taix_AIX'#010+
- 'p*2Tdarwin_Darwin/Mac OS X'#010+
- 'p*2Tembedded_Embedded'#010+
- 'p*2Tlinux_Linux'#010+
- 'S*2Tlinux_Linux'#010+
- 'S*2Tsolaris_Solaris'#010+
- 's*2Tlinux_Linux'#010+
- 'V*2Tembedded_Embedded'#010+
- '**1u<x>_Undefines the symbol <x>'#010+
- '**1U_Unit',' options:'#010+
- '**2Un_Do not check where the unit name matches the file name'#010+
- '**2Ur_Generate release unit files (never automatically recompiled)'#010+
- '**2Us_Compile a system unit'#010+
- '**1v<x>_Be verbose. <x> is a combination of the following letters:'#010+
- '**2*_e ',': Show errors (default) 0 : Show nothing (except errors'+
- ')'#010+
- '**2*_w : Show warnings u : Show unit info'#010+
- '**2*_n : Show notes t : Show tried/used files'#010+
- '**2*_h : Show hints c : Show conditionals',#010+
- '**2*_i : Show general info d : Show debug info'#010+
- '**2*_l : Show linenumbers r : Rhide/GCC compatibility mode'#010+
- '**2*_s : Show time stamps q : Show message numbers'#010+
- '**2*_a : Show everything x : Show info',' about invoked too'+
- 'ls'#010+
- '**2*_b : Write file names messages p : Write tree.log with parse tre'+
- 'e'#010+
- '**2*_ with full path v : Write fpcdebug.txt with'#010+
- '**2*_z : Write output to stderr lots of debugging info'#010+
- '**2*_m<x>,<y> : Do',' not show messages numbered <x> and <y>'#010+
- 'F*1V<x>_Append '#039'-<x>'#039' to the used compiler binary name (e.g. f'+
- 'or version)'#010+
- '**1W<x>_Target-specific options (targets)'#010+
- '3*2WA_Specify native type application (Windows)'#010+
- '4*2WA_Specify native type applicatio','n (Windows)'#010+
- 'A*2WA_Specify native type application (Windows)'#010+
- '3*2Wb_Create a bundle instead of a library (Darwin)'#010+
- 'P*2Wb_Create a bundle instead of a library (Darwin)'#010+
- 'p*2Wb_Create a bundle instead of a library (Darwin)'#010+
- 'a*2Wb_Create a bundle in','stead of a library (Darwin)'#010+
- 'A*2Wb_Create a bundle instead of a library (Darwin)'#010+
- '4*2Wb_Create a bundle instead of a library (Darwin)'#010+
- '3*2WB_Create a relocatable image (Windows, Symbian)'#010+
- '3*2WB<x>_Set image base to <x> (Windows, Symbian)'#010+
- '4*2WB_','Create a relocatable image (Windows)'#010+
- '4*2WB<x>_Set image base to <x> (Windows)'#010+
- 'A*2WB_Create a relocatable image (Windows, Symbian)'#010+
- 'A*2WB<x>_Set image base to <x> (Windows, Symbian)'#010+
- '3*2WC_Specify console type application (EMX, OS/2, Windows)'#010,
- '4*2WC_Specify console type application (Windows)'#010+
- 'A*2WC_Specify console type application (Windows)'#010+
- 'P*2WC_Specify console type application (Classic Mac OS)'#010+
- '3*2WD_Use DEFFILE to export functions of DLL or EXE (Windows)'#010+
- '4*2WD_Use DEFFILE to exp','ort functions of DLL or EXE (Windows)'#010+
- 'A*2WD_Use DEFFILE to export functions of DLL or EXE (Windows)'#010+
- '3*2We_Use external resources (Darwin)'#010+
- '4*2We_Use external resources (Darwin)'#010+
- 'a*2We_Use external resources (Darwin)'#010+
- 'A*2We_Use external resourc','es (Darwin)'#010+
- 'P*2We_Use external resources (Darwin)'#010+
- 'p*2We_Use external resources (Darwin)'#010+
- '3*2WF_Specify full-screen type application (EMX, OS/2)'#010+
- '6*2WF<x>_Set TOS program flags to <x> (Atari)'#010+
- '3*2WG_Specify graphic type application (EMX, OS/2, ','Windows)'#010+
- '4*2WG_Specify graphic type application (Windows)'#010+
- 'A*2WG_Specify graphic type application (Windows)'#010+
- 'P*2WG_Specify graphic type application (Classic Mac OS)'#010+
- '3*2Wi_Use internal resources (Darwin)'#010+
- '4*2Wi_Use internal resources (Darwin)'#010+
- 'a','*2Wi_Use internal resources (Darwin)'#010+
- 'A*2Wi_Use internal resources (Darwin)'#010+
- 'P*2Wi_Use internal resources (Darwin)'#010+
- 'p*2Wi_Use internal resources (Darwin)'#010+
- '3*2WI_Turn on/off the usage of import sections (Windows)'#010+
- '4*2WI_Turn on/off the usage of i','mport sections (Windows)'#010+
- 'A*2WI_Turn on/off the usage of import sections (Windows)'#010+
- '8*2Wh_Use huge code for units (ignored for models with CODE in a uniqu'+
- 'e segment)'#010+
- '8*2Wm<x>_Set memory model'#010+
- '8*3WmTiny_Tiny memory model'#010+
- '8*3WmSmall_Small memory',' model (default)'#010+
- '8*3WmMedium_Medium memory model'#010+
- '8*3WmCompact_Compact memory model'#010+
- '8*3WmLarge_Large memory model'#010+
- '8*3WmHuge_Huge memory model'#010+
- '3*2WM<x>_Minimum Mac OS X deployment version: 10.4, 10.5.1, ... (Darwi'+
- 'n)'#010+
- '4*2WM<x>_Minimum Mac OS X ','deployment version: 10.4, 10.5.1, ... (Dar'+
- 'win)'#010+
- 'p*2WM<x>_Minimum Mac OS X deployment version: 10.4, 10.5.1, ... (Darwi'+
- 'n)'#010+
- 'P*2WM<x>_Minimum Mac OS X deployment version: 10.4, 10.5.1, ... (Darwi'+
- 'n)'#010+
- '3*2WN_Do not generate relocation code, needed f','or debugging (Windows'+
- ')'#010+
- '4*2WN_Do not generate relocation code, needed for debugging (Windows)'#010+
- 'A*2WN_Do not generate relocation code, needed for debugging (Windows)'#010+
- 'A*2Wp<x>_Specify the controller type; see fpc -i or fpc -iu for possib'+
- 'le valu','es'#010+
- 'm*2Wp<x>_Specify the controller type; see fpc -i or fpc -iu for possib'+
- 'le values'#010+
- 'V*2Wp<x>_Specify the controller type; see fpc -i or fpc -iu for possib'+
- 'le values'#010+
- '3*2WP<x>_Minimum iOS deployment version: 3.0, 5.0.1, ... (iphonesim)'#010+
- '4*2WP<x>','_Minimum iOS deployment version: 8.0, 8.0.2, ... (iphonesim)'+
- #010+
- 'a*2WP<x>_Minimum iOS deployment version: 7.0, 7.1.2, ... (Darwin)'#010+
- 'A*2WP<x>_Minimum iOS deployment version: 3.0, 5.0.1, ... (Darwin)'#010+
- '3*2WR_Generate relocation code (Windows)'#010+
- '4*2WR_','Generate relocation code (Windows)'#010+
- 'A*2WR_Generate relocation code (Windows)'#010+
- '8*2Wt<x>_Set the target executable format'#010+
- '8*3Wtexe_Create a DOS .EXE file (default)'#010+
- '8*3Wtcom_Create a DOS .COM file (requires tiny memory model)'#010+
- 'P*2WT_Specify MPW t','ool type application (Classic Mac OS)'#010+
- '**2WX_Enable executable stack (Linux)'#010+
- '**1X_Executable options:'#010+
- '**2X9_Generate linkerscript for GNU Binutils ld older than version 2.1'+
- '9.1 (Linux)'#010+
- '**2Xc_Pass --shared/-dynamic to the linker (BeOS, Darwin,',' FreeBSD, L'+
- 'inux)'#010+
- '**2Xd_Do not search default library path (sometimes required for cross'+
- '-compiling when not using -XR)'#010+
- '**2Xe_Use external linker'#010+
- '**2Xf_Substitute pthread library name for linking (BSD)'#010+
- '**2Xg_Create debuginfo in a separate fil','e and add a debuglink sectio'+
- 'n to executable'#010+
- '**2XD_Try to link units dynamically (defines FPC_LINK_DYNAMIC)'#010+
- '**2Xi_Use internal linker'#010+
- '**2XLA_Define library substitutions for linking'#010+
- '**2XLO_Define order of library linking'#010+
- '**2XLD_Exclude ','default order of standard libraries'#010+
- '**2Xm_Generate link map'#010+
- '**2XM<x>_Set the name of the '#039'main'#039' program routine (default i'+
- 's '#039'main'#039')'#010+
- '**2Xn_Use target system native linker instead of GNU ld (Solaris, AIX)'+
- #010+
- 'F*2Xp<x>_First search for the compile','r binary in the directory <x>'#010+
- '**2XP<x>_Prepend the binutils names with the prefix <x>'#010+
- '**2Xr<x>_Set the linker'#039's rlink-path to <x> (needed for cross comp'+
- 'ile, see the ld manual for more information) (BeOS, Linux)'#010+
- '**2XR<x>_Prepend <x> to all l','inker search paths (BeOS, Darwin, FreeB'+
- 'SD, Linux, Mac OS, Solaris)'#010+
- '**2Xs_Strip all symbols from executable'#010+
- '**2XS_Try to link units statically (default, defines FPC_LINK_STATIC)'#010+
- '**2Xt_Link with static libraries (-static is passed to linker)'#010,
- '**2Xv_Generate table for Virtual Entry calls'#010+
- '**2XV_Use VLink as external linker (default on Amiga, MorphOS)'#010+
- '**2XX_Try to smartlink units (defines FPC_LINK_SMART)'#010+
- '**1*_'#010+
- '**1?_Show this help'#010+
- '**1h_Shows this help without waiti','ng'
- );
|