| .. |
|
aasmcpu.pas
|
4e2fb9d28b
* MIPS: fixed O_MOVE_SOURCE and O_MOVE_DEST constants (they were swapped, amazing that it ever worked with such a mistake).
|
11 år sedan |
|
aoptcpu.pas
|
3ede5ec99b
* MIPS peephole: refactored/simplified and added (another) couple of optimizations.
|
11 år sedan |
|
aoptcpub.pas
|
93e0dd9c2f
* Patch from Fuxin Zhang: other mips and mipsel CPUs changes
|
13 år sedan |
|
aoptcpud.pas
|
0c8546f94c
* more MIPS code of David Zhang integrated
|
16 år sedan |
|
cgcpu.pas
|
ac64c4600f
+ MIPS: make use of instructions MUL,SEB and SEH that are available in modern cores.
|
11 år sedan |
|
cpubase.pas
|
c260879439
* MIPS: updated registers, dropped special registers not recognized by GAS (actually, "pc" is recognized, but it is used only for MIPS16 mode, so it is easier to add back if/when this mode is supported), added FPU condition code registers ($fcc0..$fcc7).
|
11 år sedan |
|
cpuelf.pas
|
d22dc68fda
* fixed DFA warnings for MIPS and AVR
|
11 år sedan |
|
cpugas.pas
|
244f65525b
* MIPS: dropped gas_std_regname, its functionality merged into std_regname. This fixes register names in non-instructions (reg. allocation information, variable locations, etc.) and makes assembler listings more readable.
|
11 år sedan |
|
cpuinfo.pas
|
057660d636
Replaced controller specific unit files with new automatically created version plus fixed wrong addressing of devcfg memory in linkerscript
|
11 år sedan |
|
cpunode.pas
|
b57c95043f
+ support overriding tdef/tsym methods with target-specific functionality:
|
11 år sedan |
|
cpupara.pas
|
c3350d13f9
* MIPS: floating point parameters on stack should be loaded to/from FPU registers directly, without using temp.
|
12 år sedan |
|
cpupi.pas
|
96dd464bf2
* Moved fixup_jmps to target-specific classes for powerpc,powerpc64 and MIPS, cleaned out remaining $ifdef's. A slight functionality change is that fixup_jmps is now called before adding the procedure end symbol, not after, but that should not matter.
|
11 år sedan |
|
cputarg.pas
|
b2b26f84cf
* partially merged the mips-embedded branch of Michael Ring:
|
11 år sedan |
|
hlcgcpu.pas
|
54df3e3f37
Initial version of mipsel-embedded Target for pic32mx chips.
|
12 år sedan |
|
itcpugas.pas
|
3d2a27c66c
* fix fpu register type
|
13 år sedan |
|
mipsreg.dat
|
e367ccc0ee
* MIPS: changed superregister number for $fcc0..$fcc7 to start from 32, so that range 0..31 can be used without translating into symbolic names.
|
11 år sedan |
|
ncpuadd.pas
|
d9a7d28838
+ MIPS: support floating point conditions in its emulated flags, on MIPS4+ convert such flags to registers using conditional move instructions (i.e. without branching). For older cores generated code remains the same.
|
11 år sedan |
|
ncpucall.pas
|
87684e1cf1
* MIPS: clean up
|
11 år sedan |
|
ncpucnv.pas
|
5655baa23a
* MIPS: optimized conversion of unsigned 32-bit integers to float, now uses one integer register instead of two and does not generate redundant move.
|
11 år sedan |
|
ncpuinln.pas
|
4065483a50
* completed thlcgobj.location_force_fpureg(), use it everywhere and removed
|
11 år sedan |
|
ncpuld.pas
|
4b820a1ca5
- Removed tcgloadnode.generate_picvaraccess, it is never used and is not necessary because PIC stuff is handled at lower levels.
|
12 år sedan |
|
ncpumat.pas
|
cd27d64cd5
+ Support (as target-independent as possible) optimization of division by constants:
|
11 år sedan |
|
ncpuset.pas
|
e163a2c813
* MIPS and SPARC: determine whether case expression is in range using a single unsigned comparison (like it is done on other targets).
|
11 år sedan |
|
opcode.inc
|
4e7c908b0d
+ MIPS: added movn and movz instructions.
|
11 år sedan |
|
racpugas.pas
|
e367ccc0ee
* MIPS: changed superregister number for $fcc0..$fcc7 to start from 32, so that range 0..31 can be used without translating into symbolic names.
|
11 år sedan |
|
rgcpu.pas
|
3b06465322
+ MIPS: support replacement spilling for mov.s, mov.d and (partially) mtc1 instructions.
|
11 år sedan |
|
rmipscon.inc
|
e367ccc0ee
* MIPS: changed superregister number for $fcc0..$fcc7 to start from 32, so that range 0..31 can be used without translating into symbolic names.
|
11 år sedan |
|
rmipsdwf.inc
|
c260879439
* MIPS: updated registers, dropped special registers not recognized by GAS (actually, "pc" is recognized, but it is used only for MIPS16 mode, so it is easier to add back if/when this mode is supported), added FPU condition code registers ($fcc0..$fcc7).
|
11 år sedan |
|
rmipsgas.inc
|
c260879439
* MIPS: updated registers, dropped special registers not recognized by GAS (actually, "pc" is recognized, but it is used only for MIPS16 mode, so it is easier to add back if/when this mode is supported), added FPU condition code registers ($fcc0..$fcc7).
|
11 år sedan |
|
rmipsgri.inc
|
c260879439
* MIPS: updated registers, dropped special registers not recognized by GAS (actually, "pc" is recognized, but it is used only for MIPS16 mode, so it is easier to add back if/when this mode is supported), added FPU condition code registers ($fcc0..$fcc7).
|
11 år sedan |
|
rmipsgss.inc
|
f58fcdf401
+ basic mips stuff
|
20 år sedan |
|
rmipsnor.inc
|
c260879439
* MIPS: updated registers, dropped special registers not recognized by GAS (actually, "pc" is recognized, but it is used only for MIPS16 mode, so it is easier to add back if/when this mode is supported), added FPU condition code registers ($fcc0..$fcc7).
|
11 år sedan |
|
rmipsnum.inc
|
c260879439
* MIPS: updated registers, dropped special registers not recognized by GAS (actually, "pc" is recognized, but it is used only for MIPS16 mode, so it is easier to add back if/when this mode is supported), added FPU condition code registers ($fcc0..$fcc7).
|
11 år sedan |
|
rmipsrni.inc
|
c260879439
* MIPS: updated registers, dropped special registers not recognized by GAS (actually, "pc" is recognized, but it is used only for MIPS16 mode, so it is easier to add back if/when this mode is supported), added FPU condition code registers ($fcc0..$fcc7).
|
11 år sedan |
|
rmipssri.inc
|
c260879439
* MIPS: updated registers, dropped special registers not recognized by GAS (actually, "pc" is recognized, but it is used only for MIPS16 mode, so it is easier to add back if/when this mode is supported), added FPU condition code registers ($fcc0..$fcc7).
|
11 år sedan |
|
rmipssta.inc
|
c260879439
* MIPS: updated registers, dropped special registers not recognized by GAS (actually, "pc" is recognized, but it is used only for MIPS16 mode, so it is easier to add back if/when this mode is supported), added FPU condition code registers ($fcc0..$fcc7).
|
11 år sedan |
|
rmipsstd.inc
|
c260879439
* MIPS: updated registers, dropped special registers not recognized by GAS (actually, "pc" is recognized, but it is used only for MIPS16 mode, so it is easier to add back if/when this mode is supported), added FPU condition code registers ($fcc0..$fcc7).
|
11 år sedan |
|
rmipssup.inc
|
e367ccc0ee
* MIPS: changed superregister number for $fcc0..$fcc7 to start from 32, so that range 0..31 can be used without translating into symbolic names.
|
11 år sedan |
|
strinst.inc
|
4e7c908b0d
+ MIPS: added movn and movz instructions.
|
11 år sedan |
|
symcpu.pas
|
02495c17bd
Fix a typo. The CPU specific version of "ttypesym" should be called "tcputypesym" and not "tcpuypesym".
|
11 år sedan |
ring
057660d636
Replaced controller specific unit files with new automatically created version plus fixed wrong addressing of devcfg memory in linkerscript