* new Portuguese translations by Marcelo B Paula (mantis #15344)

git-svn-id: trunk@14443 -

.gitattributes

@@ -285,8 +285,8 @@ compiler/msg/errorid.msg svneol=native#text/plain
 compiler/msg/errorn.msg svneol=native#text/plain
 compiler/msg/errorpl.msg svneol=native#text/plain
 compiler/msg/errorpli.msg svneol=native#text/plain
-compiler/msg/errorptd.msg svneol=native#text/plain
-compiler/msg/errorptw.msg svneol=native#text/plain
+compiler/msg/errorpt.msg svneol=native#text/plain
+compiler/msg/errorptu.msg svneol=native#text/plain
 compiler/msg/errorr.msg svneol=native#text/plain
 compiler/msg/errorru.msg svneol=native#text/plain
 compiler/msg/errorues.msg svneol=native#text/plain

compiler/msg/errorpt.msg

@@ -0,0 +1,3114 @@
+#
+#   This file is part of the Free Pascal Compiler
+#   Copyright (c) 1999-2009 by the Free Pascal Development team
+#
+#   Portuguese (DOS CP850) language file for Free Pascal Compiler
+#   Contributed by Marcelo B Paula, based on errore.msg SVN Rev.14440
+#   Former translator: Ari Ricardo Ody <ary.odi at japinfo.com.br>
+#
+#   See the file COPYING.FPC, included in this distribution,
+#   for details about the copyright.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+#
+#
+# The constants are build in the following order:
+# <part>_<type>_<txtidentifier>
+#
+# <part> is the part of the compiler the message is used
+#   asmr_     assembler parsing
+#   asmw_     assembler writing/binary writers
+#   unit_     unit handling
+#   scan_     scanner
+#   parser_   parser
+#   type_     type checking
+#   general_  general info
+#   exec_     calls to assembler, external linker, binder
+#   link_     internal linker
+#
+# <type> the type of the message it should normally used for
+#   f_   fatal error
+#   e_   error
+#   w_   warning
+#   n_   note
+#   h_   hint
+#   i_   info
+#   l_   add linenumber
+#   u_   used
+#   t_   tried
+#   c_   conditional
+#   d_   debug message
+#   x_   executable informations
+#   o_   normal (e.g., "press enter to continue")
+#
+
+#
+# General
+#
+# 01023 is the last used one
+#
+# BeginOfTeX
+% \section{General compiler messages}
+% This section gives the compiler messages which are not fatal, but which
+% display useful information. The number of such messages can be
+% controlled with the various verbosity level \var{-v} switches.
+% \begin{description}
+general_t_compilername=01000_T_Compilador: $1
+% When the \var{-vt} switch is used, this line tells you what compiler
+% is used.
+general_d_sourceos=01001_D_SO Compilador: $1
+% When the \var{-vd} switch is used, this line tells you what the source
+% operating system is.
+general_i_targetos=01002_I_SO Alvo: $1
+% When the \var{-vd} switch is used, this line tells you what the target
+% operating system is.
+general_t_exepath=01003_T_Usando caminho execut vel: $1
+% When the \var{-vt} switch is used, this line tells you where the compiler
+% looks for its binaries.
+general_t_unitpath=01004_T_Usando caminho unidade: $1
+% When the \var{-vt} switch is used, this line tells you where the compiler
+% looks for compiled units. You can set this path with the \var{-Fu} option.
+general_t_includepath=01005_T_Usando caminho inclusäes: $1
+% When the \var{-vt} switch is used, this line tells you where the compiler
+% looks for its include files (files used in \var{\{\$I xxx\}} statements).
+% You can set this path with the \var{-Fi} option.
+general_t_librarypath=01006_T_Usando caminho biblioteca: $1
+% When the \var{-vt} switch is used, this line tells you where the compiler
+% looks for the libraries. You can set this path with the \var{-Fl} option.
+general_t_objectpath=01007_T_Usando caminho objeto: $1
+% When the \var{-vt} switch is used, this line tells you where the compiler
+% looks for object files you link in (files used in \var{\{\$L xxx\}} statements).
+% You can set this path with the \var{-Fo} option.
+general_i_abslines_compiled=01008_I_$1 linhas compiladas, $2 seg $3
+% When the \var{-vi} switch is used, the compiler reports the number
+% of lines compiled, and the time it took to compile them (real time,
+% not program time).
+general_f_no_memory_left=01009_F_Mem¢ria insuficiente
+% The compiler doesn't have enough memory to compile your program. There are
+% several remedies for this:
+% \begin{itemize}
+% \item If you're using the build option of the compiler, try compiling the
+% different units manually.
+% \item If you're compiling a huge program, split it up into units, and compile
+% these separately.
+% \item If the previous two don't work, recompile the compiler with a bigger
+% heap. (You can use the \var{-Ch} option for this, \seeo{Ch}.)
+% \end{itemize}
+general_i_writingresourcefile=01010_I_Gravando arquivo Tabela Recursos 'String': $1
+% This message is shown when the compiler writes the Resource String Table
+% file containing all the resource strings for a program.
+general_e_errorwritingresourcefile=01011_E_Gravando arquivo Tabela Recursos 'String': $1
+% This message is shown when the compiler encounters an error when writing
+% the Resource String Table file.
+general_i_fatal=01012_I_Fatal:
+% Prefix for Fatal Errors.
+general_i_error=01013_I_Erro:
+% Prefix for Errors.
+general_i_warning=01014_I_Aviso:
+% Prefix for Warnings.
+general_i_note=01015_I_Nota:
+% Prefix for Notes.
+general_i_hint=01016_I_Dica:
+% Prefix for Hints.
+general_e_path_does_not_exist=01017_E_Caminho "$1" nÆo existe
+% The specified path does not exist.
+general_f_compilation_aborted=01018_F_Compila‡Æo abortada
+% Compilation was aborted.
+general_text_bytes_code=01019_c¢digo gerado (bytes)
+% The size of the generated executable code, in bytes.
+general_text_bytes_data=01020_dados gerados (bytes)
+% The size of the generated program data, in bytes.
+general_i_number_of_warnings=01021_I_$1 aviso(s) emitido(s)
+% Total number of warnings issued during compilation.
+general_i_number_of_hints=01022_I_$1 dica(s) emitida(s)
+% Total number of hints issued during compilation.
+general_i_number_of_notes=01023_I_$1 nota(s) emitida(s)
+% Total number of notes issued during compilation.
+% \end{description}
+#
+# Scanner
+#
+# 02086 is the last used one
+#
+% \section{Scanner messages.}
+% This section lists the messages that the scanner emits. The scanner takes
+% care of the lexical structure of the pascal file, i.e. it tries to find
+% reserved words, strings, etc. It also takes care of directives and
+% conditional compilation handling.
+% \begin{description}
+scan_f_end_of_file=02000_F_Fim de arquivo inesperado
+% This typically happens in one of the following cases:
+% \begin{itemize}
+% \item The source file ends before the final \var{end.} statement. This
+% happens mostly when the \var{begin} and \var{end} statements aren't
+% balanced;
+% \item An include file ends in the middle of a statement.
+% \item A comment was not closed.
+% \end{itemize}
+scan_f_string_exceeds_line=02001_F_'String' excendo linha
+% There is a missing closing ' in a string, so it occupies
+% multiple lines.
+scan_f_illegal_char=02002_F_caractere ilegal "$1" ($2)
+% An illegal character was encountered in the input file.
+scan_f_syn_expected=02003_F_Erro sintaxe, "$1" esperado, mas "$2" encontrado
+% This indicates that the compiler expected a different token than
+% the one you typed. It can occur almost anywhere it is possible to make an error
+% against the Pascal language.
+scan_t_start_include_file=02004_TL_Iniciando leitura arquivo de inclusäes $1
+% When you provide the \var{-vt} switch, the compiler tells you
+% when it starts reading an included file.
+scan_w_comment_level=02005_W_N¡vel coment rio $1 encontrado
+% When the \var{-vw} switch is used, then the compiler warns you if
+% it finds nested comments. Nested comments are not allowed in Turbo Pascal
+% and Delphi, and can be a possible source of errors.
+scan_n_ignored_switch=02008_N_Ignorar chave compilador "$1"
+% With \var{-vn} on, the compiler warns if it ignores a switch.
+scan_w_illegal_switch=02009_W_Chave ilegal compilador "$1"
+% You included a compiler switch (i.e. \var{\{\$... \}}) which the compiler
+% does not recognise.
+scan_w_switch_is_global=02010_W_Chave global compilador fora de lugar
+% The compiler switch is misplaced, and should be located at
+% the start of the unit or program.
+scan_e_illegal_char_const=02011_E_Constante caractere ilegal
+% This happens when you specify a character with its ASCII code, as in
+% \var{\#96}, but the number is either illegal, or out of range.
+scan_f_cannot_open_input=02012_F_Imposs¡vel abrir arquivo "$1"
+% \fpc cannot find the program or unit source file you specified on the
+% command line.
+scan_f_cannot_open_includefile=02013_F_Imposs¡vel abrir arquivo de inclusäes "$1"
+% \fpc cannot find the source file you specified in a \var{\{\$include ..\}}
+% statement.
+scan_e_illegal_pack_records=02015_E_Especificador alinhamento registro ilegal "$1"
+% You are specifying \var{\{\$PACKRECORDS n\} } or \var{\{\$ALIGN n\} }
+% with an illegal value for \var{n}. For \$PACKRECORDS valid alignments are 1, 2, 4, 8, 16, 32, C,
+% NORMAL, DEFAULT, and for \$ALIGN valid alignments are 1, 2, 4, 8, 16, 32, ON,
+% OFF. Under mode MacPas \$ALIGN also supports MAC68K, POWER and RESET.
+scan_e_illegal_pack_enum=02016_E_Especificador tamanho-m¡nimo enumera‡Æo ilegal "$1"
+% You are specifying the \var{\{\$PACKENUM n\}} with an illegal value for
+% \var{n}. Only 1,2,4, NORMAL or DEFAULT is valid here.
+scan_e_endif_expected=02017_E_$ENDIF esperado para $1 $2 definido em $3 linha $4
+% Your conditional compilation statements are unbalanced.
+scan_e_preproc_syntax_error=02018_E_Erro sintaxe enquanto analisando uma expressÆo compila‡Æo condicional
+% There is an error in the expression following the \var{\{\$if ..\}}, \var{\{\$ifc \}}
+% or \var{\{\$setc \}} compiler directives.
+scan_e_error_in_preproc_expr=02019_E_Avaliando uma expressÆo compila‡Æo condicional
+% There is an error in the expression following the \var{\{\$if ..\}}, $ifc or $setc compiler
+% directives.
+scan_w_macro_cut_after_255_chars=02020_W_Conte£do macro limitada ao tamanho de 255 caracteres
+% The contents of macros cannot be longer than 255 characters.
+scan_e_endif_without_if=02021_E_ENDIF sem IF(N)DEF
+% Your \var{\{\$IFDEF ..\}} and {\{\$ENDIF\}} statements aren't balanced.
+scan_f_user_defined=02022_F_Definido pelo usu rio: $1
+% A user defined fatal error occurred. See also the \progref.
+scan_e_user_defined=02023_E_Definido pelo usu rio: $1
+% A user defined error occurred. See also the \progref.
+scan_w_user_defined=02024_W_Definido pelo usu rio: $1
+% A user defined warning occurred. See also the \progref.
+scan_n_user_defined=02025_N_Definido pelo usu rio: $1
+% A user defined note was encountered. See also the \progref.
+scan_h_user_defined=02026_H_Definido pelo usu rio: $1
+% A user defined hint was encountered. See also the \progref.
+scan_i_user_defined=02027_I_Definido pelo usu rio: $1
+% User defined information was encountered. See also the \progref.
+scan_e_keyword_cant_be_a_macro=02028_E_Palavra-chave redefinida como macro nÆo tem efeito
+% You cannot redefine keywords with macros.
+scan_f_macro_buffer_overflow=02029_F_Transbordamento "buffer" macro durante leitura ou expansÆo de uma macro
+% Your macro or its result was too long for the compiler.
+scan_w_macro_too_deep=02030_W_ExpansÆo de macros excede profundidade de 16.
+% When expanding a macro, macros have been nested to a level of 16.
+% The compiler will expand no further, since this may be a sign that
+% recursion is used.
+scan_w_wrong_styled_switch=02031_W_chaves compilador nÆo sÆo suportadas no estilo de coment rio //
+% Compiler switches should be in normal Pascal style comments.
+scan_d_handling_switch=02032_DL_Chave manipula‡Æo "$1"
+% When you set debugging info on (\var{-vd}) the compiler tells you when it
+% is evaluating conditional compile statements.
+scan_c_endif_found=02033_CL_ENDIF $1 encontrado
+% When you turn on conditional messages (\var{-vc}), the compiler tells you
+% where it encounters conditional statements.
+scan_c_ifdef_found=02034_CL_IFDEF $1 encontrado, $2
+% When you turn on conditional messages (\var{-vc}), the compiler tells you
+% where it encounters conditional statements.
+scan_c_ifopt_found=02035_CL_IFOPT $1 encontrado, $2
+% When you turn on conditional messages (\var{-vc}), the compiler tells you
+% where it encounters conditional statements.
+scan_c_if_found=02036_CL_IF $1 encontrado, $2
+% When you turn on conditional messages (\var{-vc}), the compiler tells you
+% where it encounters conditional statements.
+scan_c_ifndef_found=02037_CL_IFNDEF $1 encontrado, $2
+% When you turn on conditional messages (\var{-vc}), the compiler tells you
+% where it encounters conditional statements.
+scan_c_else_found=02038_CL_ELSE $1 encontrado, $2
+% When you turn on conditional messages (\var{-vc}), the compiler tells you
+% where it encounters conditional statements.
+scan_c_skipping_until=02039_CL_Pulando at‚...
+% When you turn on conditional messages (\var{-vc}), the compiler tells you
+% where it encounters conditional statements, and whether it is skipping or
+% compiling parts.
+scan_i_press_enter=02040_I_Tecle <return> para continuar
+% When the \var{-vi} switch is used, the compiler stops compilation
+% and waits for the \var{Enter} key to be pressed when it encounters
+% a \var{\{\$STOP\}} directive.
+scan_w_unsupported_switch=02041_W_Chave nÆo suportada "$1"
+% When warnings are turned on (\var{-vw}), the compiler warns you about
+% unsupported switches. This means that the switch is used in Delphi or
+% Turbo Pascal, but not in \fpc.
+scan_w_illegal_directive=02042_W_Diretiva compilador ilegal "$1"
+% When warnings are turned on (\var{-vw}), the compiler warns you about
+% unrecognised switches. For a list of recognised switches, see the \progref.
+scan_t_back_in=02043_TL_De volta $1
+% When you use the \var{-vt} switch, the compiler tells you when it has finished
+% reading an include file.
+scan_w_unsupported_app_type=02044_W_Tipo aplica‡Æo nÆo suportada: "$1"
+% You get this warning if you specify an unknown application type
+% with the directive \var{\{\$APPTYPE\}}.
+scan_w_app_type_not_support=02045_W_APPTYPE nÆo ‚ suportado pelo SO alvo
+% The \var{\{\$APPTYPE\}} directive is supported by certain operating systems only.
+scan_w_description_not_support=02046_W_DESCRIPTION nÆo ‚ suportado pelo SO alvo
+% The \var{\{\$DESCRIPTION\}} directive is not supported on this target OS.
+scan_n_version_not_support=02047_N_VERSION nÆo ‚ suportado pelo SO alvo
+% The \var{\{\$VERSION\}} directive is not supported on this target OS.
+scan_n_only_exe_version=02048_N_VERSION apenas para EXEs ou DLLs
+% The \var{\{\$VERSION\}} directive is only used for executable or DLL sources.
+scan_w_wrong_version_ignored=02049_W_Formato incorreto para a diretiva VERSION "$1"
+% The \var{\{\$VERSION\}} directive format is majorversion.minorversion
+% where majorversion and minorversion are words.
+scan_e_illegal_asmmode_specifier=02050_E_Estilo especificado assembler ilegal "$1"
+% When you specify an assembler mode with the \var{\{\$ASMMODE xxx\}} directive,
+% the compiler didn't recognize the mode you specified.
+scan_w_no_asm_reader_switch_inside_asm=02051_W_ASM reader switch is not possible inside asm statement, "$1" will be effective only for next
+% It is not possible to switch from one assembler reader to another
+% inside an assembler block. The new reader will be used for next
+% assembler statements only.
+scan_e_wrong_switch_toggle=02052_E_Chave alternƒncia incorreta, usar ON/OFF ou +/-
+% You need to use ON or OFF or a + or - to toggle the switch.
+scan_e_resourcefiles_not_supported=02053_E_Arquivo recursos nÆo suportado para este alvo
+% The target you are compiling for doesn't support resource files.
+scan_w_include_env_not_found=02054_W_Vari vel inclusÆo ambiente "$1" nÆo encontrado no ambiente
+% The included environment variable can't be found in the environment; it will
+% be replaced by an empty string instead.
+scan_e_invalid_maxfpureg_value=02055_E_Valor ilegal para o registrador limite UPF
+% Valid values for this directive are 0..8 and NORMAL/DEFAULT.
+scan_w_only_one_resourcefile_supported=02056_W_Apenas um arquivo de recursos ‚ suportado para este alvo
+% The target you are compiling for supports only one resource file.
+% The first resource file found is used, the others are discarded.
+scan_w_macro_support_turned_off=02057_W_Suporte Macro foi desativado
+% A macro declaration has been found, but macro support is currently off,
+% so the declaration will be ignored. To turn macro support on compile with
+% -Sm on the command line or add \{\$MACRO ON\} in the source.
+scan_e_invalid_interface_type=02058_E_Tipo ilegal de interface especificado. SÆo v lidos COM, CORBA ou DEFAULT.
+% The interface type that was specified is not supported.
+scan_w_appid_not_support=02059_W_APPID ‚ suportado apenas para PalmOS
+% The \var{\{\$APPID\}} directive is only supported for the PalmOS target.
+scan_w_appname_not_support=02060_W_APPNAME ‚ suportado apenas para PalmOS
+% The \var{\{\$APPNAME\}} directive is only supported for the PalmOS target.
+scan_e_string_exceeds_255_chars=02061_E_Constante 'String' nÆo pode ser maior que 255 caracteres
+% A single string constant can contain at most 255 chars. Try splitting up the
+% string into multiple smaller parts and concatenate them with a + operator.
+scan_f_include_deep_ten=02062_F_Incluindo arquivos inclusÆo excede um n¡vel de 16.
+% When including include files the files have been nested to a level of 16.
+% The compiler will expand no further, since this may be a sign that
+% recursion is used.
+scan_e_too_many_push=02063_F_Muitos n¡veis de PUSH. Max. 20
+% A maximum of 20 levels is allowed. This error occurs only in mode MacPas.
+scan_e_too_many_pop=02064_E_Um POP sem um PUSH anterior
+% This error occurs only in mode MacPas.
+scan_e_error_macro_lacks_value=02065_E_Macro ou vari vel tempo compila‡Æo "$1" sem nenhum valor
+% Thus the conditional compile time expression cannot be evaluated.
+scan_e_wrong_switch_toggle_default=02066_E_Chave alternƒncia incorreta, usar ON/OFF/DEFAULT ou +/-/*
+% You need to use ON or OFF or DEFAULT or a + or - or * to toggle the switch.
+scan_e_mode_switch_not_allowed=02067_E_Chave modo "$1" nÆo permitida aqui
+% A mode switch has already been encountered, or, in the case of option -Mmacpas,
+% a mode switch occurs after UNIT.
+scan_e_error_macro_undefined=02068_E_Vari vel tempo compila‡Æo ou macro "$1" nÆo definida.
+% Thus the conditional compile time expression cannot be evaluated. Only in mode MacPas.
+scan_e_utf8_bigger_than_65535=02069_E_C¢digo UTF-8 maior que 65535 encontrado
+% \fpc handles UTF-8 strings internally as widestrings, i.e. the char codes are limited to 65535.
+scan_e_utf8_malformed=02070_E_'String' UTF-8 mal-formada
+% The given string isn't a valid UTF-8 string.
+scan_c_switching_to_utf8=02071_C_Assinatura UTF-8 encontrada, usando codifica‡Æo UTF-8
+% The compiler found a UTF-8 encoding signature (\$ef, \$bb, \$bf) at the beginning of a file,
+% so it interprets it as a UTF-8 file.
+scan_e_compile_time_typeerror=02072_E_ExpressÆo tempo compila‡Æo: Procurado $1 mas obtido $2 na $3
+% The type-check of a compile time expression failed.
+scan_n_app_type_not_support=02073_N_APPTYPE nÆo ‚ suportado pelo SO alvo
+% The \var{\{\$APPTYPE\}} directive is supported by certain operating systems only.
+scan_e_illegal_optimization_specifier=02074_E_Otimiza‡Æo especificada ilegal "$1"
+% You specified an optimization with the \var{\{\$OPTIMIZATION xxx\}} directive,
+% and the compiler didn't recognize the optimization you specified.
+scan_w_setpeflags_not_support=02075_W_SETPEFLAGS nÆo ‚ suportado pelo SO alvo
+% The \var{\{\$SETPEFLAGS\}} directive is not supported by the target OS.
+scan_w_imagebase_not_support=02076_W_IMAGEBASE nÆo ‚ suportado pelo SO alvo
+% The \var{\{\$IMAGEBASE\}} directive is not supported by the target OS.
+scan_w_minstacksize_not_support=02077_W_MINSTACKSIZE nÆo ‚ suportado pelo SO alvo
+% The \var{\{\$MINSTACKSIZE\}} directive is not supported by the target OS.
+scan_w_maxstacksize_not_support=02078_W_MAXSTACKSIZE nÆo ‚ suportado pelo SO alvo
+% The \var{\{\$MAXSTACKSIZE\}} directive is not supported by the target OS.
+scanner_e_illegal_warn_state=02079_E_Estado ilegal para a diretiva $WARN
+% Only ON and OFF can be used as state with a \var{\{\$WARN\}} compiler directive.
+scan_e_only_packset=02080_E_Valor ilegal para conjunto empacotamento
+% Only 0, 1, 2, 4, 8, DEFAULT and NORMAL are allowed as packset parameters.
+scan_w_pic_ignored=02081_W_Diretiva PIC ou chave ignorada
+% Several targets, such as \windows, do not support nor need PIC,
+% so the PIC directive and switch are ignored.
+scan_w_unsupported_switch_by_target=02082_W_A chave "$1" nÆo ‚ suportada pelo alvo selecionado atualmente
+% Some compiler switches like \$E are not supported by all targets.
+scan_w_frameworks_darwin_only=02084_W_Op‡äes relacionadas a "Framework" sÆo apenas suportadas para Darwin/Mac OS X
+% Frameworks are not a known concept, or at least not supported by FPC,
+% on operating systems other than Darwin/Mac OS X.
+scan_e_illegal_minfpconstprec=02085_E_Constante precisÆo m¡nima ponto flutuante ilegal "$1"
+% Valid minimal precisions for floating point constants are default, 32 and 64,
+% which mean respectively minimal (usually 32 bit), 32 bit and 64 bit precision.
+scan_w_multiple_main_name_overrides=02086_W_Sobrescrevendo nome do procedimento "main" m£ltiplas vezes, foi previamente ajustado para "$1"
+% The name for the main entry procedure is specified more than once. Only the last
+% name will be used.
+% \end{description}
+#
+# Parser
+#
+# 03281 is the last used one
+#
+% \section{Parser messages}
+% This section lists all parser messages. The parser takes care of the
+% semantics of you language, i.e. it determines if your Pascal constructs
+% are correct.
+% \begin{description}
+parser_e_syntax_error=03000_E_Analizador - Erro sintaxe
+% An error against the Turbo Pascal language was encountered. This typically
+% happens when an illegal character is found in the source file.
+parser_e_dont_nest_interrupt=03004_E_Procedimento INTERRUPT nÆo pode ser aninhado
+% An \var{INTERRUPT} procedure must be global.
+parser_w_proc_directive_ignored=03005_W_Tipo procedimento "$1" ignorado
+% The specified procedure directive is ignored by FPC programs.
+parser_e_no_overload_for_all_procs=03006_E_Nem todas as declara‡äes de "$1" estÆo declaradas com OVERLOAD
+% When you want to use overloading using the \var{OVERLOAD} directive, then
+% all declarations need to have \var{OVERLOAD} specified.
+parser_e_export_name_double=03008_E_Nome fun‡Æo exportada duplicada "$1"
+% Exported function names inside a specific DLL must all be different.
+parser_e_export_ordinal_double=03009_E_Öndice fun‡Æo exportada duplicada $1
+% Exported function indexes inside a specific DLL must all be different.
+parser_e_export_invalid_index=03010_E_¡ndice inv lido para fun‡Æo exportada
+% DLL function index must be in the range \var{1..\$FFFF}.
+parser_w_parser_reloc_no_debug=03011_W_Informa‡Æo depura‡Æo DLL reloc vel ou execut vel $1 nÆo funciona, desabilitado.
+% It is currently not possible to include debug information in a relocatable DLL.
+parser_w_parser_win32_debug_needs_WN=03012_W_Para permitir depura‡Æo para c¢digo win32 vocˆ necessita desabilitar reloca‡Æo com op‡Æo -WN
+% Stabs debug info is wrong for relocatable DLL or EXES. Use -WN
+% if you want to debug win32 executables.
+parser_e_constructorname_must_be_init=03013_E_Nome Construtor deve ser INIT
+% You are declaring an object constructor with a name which is not \var{init}, and the
+% \var{-Ss} switch is in effect. See the switch \seeo{Ss}.
+parser_e_destructorname_must_be_done=03014_E_Nome Destruidor deve ser DONE
+% You are declaring an object destructor with a name which is not \var{done}, and the
+% \var{-Ss} switch is in effect. See the switch \seeo{Ss}.
+parser_e_proc_inline_not_supported=03016_E_Tipo procedimento INLINE nÆo suportado
+% You tried to compile a program with C++ style inlining, and forgot to
+% specify the \var{-Si} option (\seeo{Si}). The compiler doesn't support C++
+% styled inlining by default.
+parser_w_constructor_should_be_public=03018_W_Construtor deve ser p£blico
+% Constructors must be in the 'public' part of an object (class) declaration.
+parser_w_destructor_should_be_public=03019_W_Destruidor deve ser p£blico
+% Destructors must be in the 'public' part of an object (class) declaration.
+parser_n_only_one_destructor=03020_N_Classe deve ter apenas um destruidor
+% You can declare only one destructor for a class.
+parser_e_no_local_objects=03021_E_Defini‡äes classe local nÆo permitidas
+% Classes must be defined globally. They cannot be defined inside a
+% procedure or function.
+parser_f_no_anonym_objects=03022_F_Defini‡äes classe an“nima nÆo permitidas
+% An invalid object (class) declaration was encountered, i.e. an
+% object or class without methods that isn't derived from another object or
+% class. For example:
+% \begin{verbatim}
+% Type o = object
+%          a : longint;
+%          end;
+% \end{verbatim}
+% will trigger this error.
+parser_n_object_has_no_vmt=03023_N_O objeto "$1" nÆo tem VMT
+% This is a note indicating that the declared object has no
+% virtual method table.
+parser_e_illegal_parameter_list=03024_E_Lista parƒmetros ilegal
+% You are calling a function with parameters that are of a different type than
+% the declared parameters of the function.
+parser_e_wrong_parameter_size=03026_E_N£mero incorreto de parƒmetros especificado para chamada de "$1"
+% There is an error in the parameter list of the function or procedure --
+% the number of parameters is not correct.
+parser_e_overloaded_no_procedure=03027_E_Identificador sobrecarregado "$1" nÆo ‚ uma fun‡Æo
+% The compiler encountered a symbol with the same name as an overloaded
+% function, but it is not a function it can overload.
+parser_e_overloaded_have_same_parameters=03028_E_Fun‡äes sobrecarregadas tˆm a mesma lista de parƒmetros
+% You're declaring overloaded functions, but with the same parameter list.
+% Overloaded function must have at least 1 different parameter in their
+% declaration.
+parser_e_header_dont_match_forward=03029_E_Cabe‡alho da fun‡Æo nÆo coincide com a declara‡Æo anterior de "$1"
+% You declared a function with the same parameters but
+% different result type or function modifiers.
+parser_e_header_different_var_names=03030_E_Cabe‡alho fun‡Æo "$1" nÆo coincide com posterior : nome var modifica $2 => $3
+% You declared the function in the \var{interface} part, or with the
+% \var{forward} directive, but defined it with a different parameter list.
+parser_n_duplicate_enum=03031_N_Valores tipo enumera‡Æo tˆm que ser ascendentes
+% \fpc allows enumeration constructions as in C. Examine the following
+% two declarations:
+% \begin{verbatim}
+% type a = (A_A,A_B,A_E:=6,A_UAS:=200);
+% type a = (A_A,A_B,A_E:=6,A_UAS:=4);
+% \end{verbatim}
+% The second declaration would produce an error. \var{A\_UAS} needs to have a
+% value higher than \var{A\_E}, i.e. at least 7.
+parser_e_no_with_for_variable_in_other_segments=03033_E_With nÆo pode ser usado para vari veis em segmentos diferentes
+% With stores a variable locally on the stack,
+% but this is not possible if the variable belongs to another segment.
+parser_e_too_much_lexlevel=03034_E_Aninhamento fun‡Æo > 31
+% You can nest function definitions only 31 levels deep.
+parser_e_range_check_error=03035_E_Erro verifica‡Æo de faixa enquanto avaliando constantes
+% The constants are out of their allowed range.
+parser_w_range_check_error=03036_W_Erro verifica‡Æo de faixa enquanto avaliando constantes
+% The constants are out of their allowed range.
+parser_e_double_caselabel=03037_E_R¢tulo duplicado declara‡Æo "case"
+% You are specifying the same label 2 times in a \var{case} statement.
+parser_e_case_lower_less_than_upper_bound=03038_E_Limite superior da faixa declara‡Æo "case" ‚ menor que o limite inferior
+% The upper bound of a \var{case} label is less than the lower bound and this
+% is useless.
+parser_e_type_const_not_possible=03039_E_Constantes tipadas de classes ou interfaces nÆo sÆo permitidas
+% You cannot declare a constant of type class or object.
+parser_e_no_overloaded_procvars=03040_E_Vari veis fun‡Æo de fun‡äes sobrecarregadas nÆo sÆo permitidas
+% You are trying to assign an overloaded function to a procedural variable.
+% This is not allowed.
+parser_e_invalid_string_size=03041_E_Comprimento 'String' deve ter valor entre 1 … 255
+% The length of a shortstring in Pascal is limited to 255 characters. You are
+% trying to declare a string with length less than 1 or greater than 255.
+parser_w_use_extended_syntax_for_objects=03042_W_Use sintaxe extendida de NEW e DISPOSE para instanciar objetos
+% If you have a pointer \var{a} to an object type, then the statement
+% \var{new(a)} will not initialize the object (i.e. the constructor isn't
+% called), although space will be allocated. You should issue the
+% \var{new(a,init)} statement. This will allocate space, and call the
+% constructor of the object.
+parser_w_no_new_dispose_on_void_pointers=03043_W_Uso de NEW ou DISPOSE para ponteiros nÆo tipados nÆo tem sentido
+parser_e_no_new_dispose_on_void_pointers=03044_E_Uso de NEW ou DISPOSE nÆo ‚ poss¡vel para ponteiros nÆo tipados
+% You cannot use \var{new(p)} or \var{dispose(p)} if \var{p} is an untyped pointer
+% because no size is associated to an untyped pointer.
+% It is accepted for compatibility in \var{TP} and \var{DELPHI} modes, but the
+% compiler will still warn you if it finds such a construct.
+parser_e_class_id_expected=03045_E_Identificador de classe esperado
+% This happens when the compiler scans a procedure declaration that contains
+% a dot, i.e., an object or class method, but the type in front of the dot is not
+% a known type.
+parser_e_no_type_not_allowed_here=03046_E_Identificador tipo nÆo permitido aqui
+% You cannot use a type inside an expression.
+parser_e_methode_id_expected=03047_E_Identificador de m‚todo esperado
+% This identifier is not a method.
+% This happens when the compiler scans a procedure declaration that contains
+% a dot, i.e., an object or class method, but the procedure name is not a
+% procedure of this type.
+parser_e_header_dont_match_any_member=03048_E_Cabe‡alho fun‡Æo nÆo coincide com qualquer m‚todo desta classe "$1"
+% This identifier is not a method.
+% This happens when the compiler scans a procedure declaration that contains
+% a dot, i.e., an object or class method, but the procedure name is not a
+% procedure of this type.
+parser_d_procedure_start=03049_DL_Procedimento/fun‡Æo $1
+% When using the \var{-vd} switch, the compiler tells you when it starts
+% processing a procedure or function implementation.
+parser_e_error_in_real=03050_E_Constante ponto flutuante ilegal
+% The compiler expects a floating point expression, and gets something else.
+parser_e_fail_only_in_constructor=03051_E_FAIL s¢ pode ser usado em contrutores
+% You are using the \var{fail} keyword outside a constructor method.
+parser_e_no_paras_for_destructor=03052_E_Destruidores nÆo podem ter parƒmetros
+% You are declaring a destructor with a parameter list. Destructor methods
+% cannot have parameters.
+parser_e_only_class_methods_via_class_ref=03053_E_Apenas m‚todos classe podem ser referenciadas por referˆncias classe
+% This error occurs in a situation like the following:
+% \begin{verbatim}
+% Type :
+%    Tclass = Class of Tobject;
+%
+% Var C : TClass;
+%
+% begin
+% ...
+% C.free
+% \end{verbatim}
+% \var{Free} is not a class method and hence cannot be called with a class
+% reference.
+parser_e_only_class_methods=03054_E_Apenas m‚todos classe podem ser acessadas em m‚todos de classe
+% This is related to the previous error. You cannot call a method of an object
+% from inside a class method. The following code would produce this error:
+% \begin{verbatim}
+% class procedure tobject.x;
+%
+% begin
+%   free
+% \end{verbatim}
+% Because free is a normal method of a class it cannot be called from a class
+% method.
+parser_e_case_mismatch=03055_E_Constante e tipo CASE incompat¡veis
+% One of the labels is not of the same type as the case variable.
+parser_e_illegal_symbol_exported=03056_E_S¡mbolos s¢ podem ser exportados em uma biblioteca
+% You can only export procedures and functions when you write a library. You
+% cannot export variables or constants.
+parser_w_should_use_override=03057_W_Um m‚todo herdado ‚ ocultado por "$1"
+% A method that is declared \var{virtual} in a parent class, should be
+% overridden in the descendant class with the \var{override} directive. If you
+% don't specify the \var{override} directive, you will hide the parent method;
+% you will not override it.
+parser_e_nothing_to_be_overridden=03058_E_NÆo h  m‚todo na classe ancestral para ser sobreposto: "$1"
+% You are trying to \var{override} a virtual method of a parent class that does
+% not exist.
+parser_e_no_procedure_to_access_property=03059_E_Nenhum membro foi provido para acessar a propriedade
+% You specified no \var{read} directive for a property.
+parser_w_stored_not_implemented=03060_W_Diretiva propriedade armazenamento ainda nÆo foi implementada
+% This message is no longer used, as the \var{stored} directive has been implemented.
+parser_e_ill_property_access_sym=03061_E_S¡mbolo ilegal para acesso propriedade
+% There is an error in the \var{read} or \var{write} directives for an array
+% property. When you declare an array property, you can only access it with
+% procedures and functions. The following code would cause such an error.
+% \begin{verbatim}
+% tmyobject = class
+%   i : integer;
+%   property x [i : integer]: integer read I write i;
+% \end{verbatim}
+%
+parser_e_cant_access_protected_member=03062_E_NÆo ‚ poss¡vel acessar um campo protegido de um objeto aqui
+% Fields that are declared in a \var{protected} section of an object or class
+% declaration cannot be accessed outside the module where the object is
+% defined, or outside descendent object methods.
+parser_e_cant_access_private_member=03063_E_NÆo ‚ poss¡vel acessar um campo privado de um objeto aqui
+% Fields that are declared in a \var{private} section of an object or class
+% declaration cannot be accessed outside the module where the class is
+% defined.
+parser_e_overridden_methods_not_same_ret=03066_E_M‚todos sobrepostos devem ter o mesmo tipo de retorno: "$2" ‚ sobreposto por "$1" que possui outro tipo retorno
+% If you declare overridden methods in a class definition, they must
+% have the same return type.
+parser_e_dont_nest_export=03067_E_Fun‡äes EXPORT declaradas nÆo podem estar aninhadas
+% You cannot declare a function or procedure within a function or procedure
+% that was declared as an export procedure.
+parser_e_methods_dont_be_export=03068_E_M‚todos nÆo podem ser EXPORTados
+% You cannot declare a procedure that is a method for an object as
+% \var{export}ed.
+parser_e_call_by_ref_without_typeconv=03069_E_Chamada por var. para arg. no. $1 tem que coincidir exatamente: Obtido "$2" esperado "$3"
+% When calling a function declared with \var{var} parameters, the variables in
+% the function call must be of exactly the same type. There is no automatic
+% type conversion.
+parser_e_no_super_class=03070_E_Classe nÆo ‚ uma classe pai da classe atual
+% When calling inherited methods, you are trying to call a method of a non-related
+% class. You can only call an inherited method of a parent class.
+parser_e_self_not_in_method=03071_E_SELF ‚ permitido apenas em m‚todos
+% You are trying to use the \var{self} parameter outside an object's method.
+% Only methods get passed the \var{self} parameters.
+parser_e_generic_methods_only_in_methods=03072_E_M‚todos s¢ podem estar em outros m‚todos se chamados diretamente com o identificador de tipo da classe
+% A construction like \var{sometype.somemethod} is only allowed in a method.
+parser_e_illegal_colon_qualifier=03073_E_Uso ilegal de ':'
+% You are using the format \var{:} (colon) 2 times on an expression that
+% is not a real expression.
+parser_e_illegal_set_expr=03074_E_Erro verifica‡Æo de faixa em conjunto construtor ou elemento conjunto duplicado
+% The declaration of a set contains an error. Either one of the elements is
+% outside the range of the set type, or two of the elements are in fact
+% the same.
+parser_e_pointer_to_class_expected=03075_E_Ponteiro para objeto esperado
+% You specified an illegal type in a \var{new} statement.
+% The extended syntax of \var{new} needs an object as a parameter.
+parser_e_expr_have_to_be_constructor_call=03076_E_ExpressÆo deve ser chamada ao construtor
+% When using the extended syntax of \var{new}, you must specify the constructor
+% method of the object you are trying to create. The procedure you specified
+% is not a constructor.
+parser_e_expr_have_to_be_destructor_call=03077_E_ExpressÆo deve ser chamada ao destruidor
+% When using the extended syntax of \var{dispose}, you must specify the
+% destructor method of the object you are trying to dispose of.
+% The procedure you specified is not a destructor.
+parser_e_invalid_record_const=03078_E_Ordem ilegal dos elementos do registro
+% When declaring a constant record, you specified the fields in the wrong
+% order.
+parser_e_false_with_expr=03079_E_Tipo expressÆo deve ser classe ou tipo registro
+% A \var{with} statement needs an argument that is of the type \var{record}
+% or \var{class}. You are using \var{with} on an expression that is not of
+% this type.
+parser_e_void_function=03080_E_Procedimentos nÆo podem retornar um valor
+% In \fpc, you can specify a return value for a function when using
+% the \var{exit} statement. This error occurs when you try to do this with a
+% procedure. Procedures cannot return a value.
+parser_e_constructors_always_objects=03081_E_Construtores e destruidores devem ser m‚todos
+% You're declaring a procedure as destructor or constructor, when the
+% procedure isn't a class method.
+parser_e_operator_not_overloaded=03082_E_Operador nÆo ‚ sobrecarregado
+% You're trying to use an overloaded operator when it is not overloaded for
+% this type.
+parser_e_no_such_assignment=03083_E_Imposs¡vel sobrecarregar atribui‡äes para tipos iguais
+% You can not overload assignment for types
+% that the compiler considers as equal.
+parser_e_overload_impossible=03084_E_Operador sobrecarga imposs¡vel
+% The combination of operator, arguments and return type are
+% incompatible.
+parser_e_no_reraise_possible=03085_E_Re-elevar nÆo ‚ poss¡vel l 
+% You are trying to re-raise an exception where it is not allowed. You can only
+% re-raise exceptions in an \var{except} block.
+parser_e_no_new_or_dispose_for_classes=03086_E_A sintaxe estendida para new ou dispose nÆo ‚ permitida para uma classe
+% You cannot generate an instance of a class with the extended syntax of
+% \var{new}. The constructor must be used for that. For the same reason, you
+% cannot call \var{dispose} to de-allocate an instance of a class, the
+% destructor must be used for that.
+parser_e_procedure_overloading_is_off=03088_E_Sobrecarga de procimento est  desativada
+% When using the \var{-So} switch, procedure overloading is switched off.
+% Turbo Pascal does not support function overloading.
+parser_e_overload_operator_failed=03089_E_NÆo ‚ poss¡vel sobrecarregar este operador. Operadores relacionados poss¡veis de sobrecarga (se algum) sÆo: $1
+% You are trying to overload an operator which cannot be overloaded.
+% The following operators can be overloaded :
+% \begin{verbatim}
+%    +, -, *, /, =, >, <, <=, >=, is, as, in, **, :=
+% \end{verbatim}
+parser_e_comparative_operator_return_boolean=03090_E_Operador de compara‡Æo deve retornar um valor boleano
+% When overloading the \var{=} operator, the function must return a boolean
+% value.
+parser_e_only_virtual_methods_abstract=03091_E_Apenas m‚todos virtuais podem ser abstratos
+% You are declaring a method as abstract, when it is not declared to be
+% virtual.
+parser_f_unsupported_feature=03092_F_Uso de caracter¡stica nÆo suportada!
+% You're trying to force the compiler into doing something it cannot do yet.
+parser_e_mix_of_classes_and_objects=03093_E_A mistura de diferentes esp‚cies de objetos (class, object, interface, etc) nÆo ‚ permitida
+% You cannot derive \var{objects}, \var{classes}, \var{cppclasses} and \var{interfaces} intertwined. E.g.
+% a class cannot have an object as parent and vice versa.
+parser_w_unknown_proc_directive_ignored=03094_W_Diretiva desconhecida de procedimento teve que ser ignorada: "$1"
+% The procedure directive you specified is unknown.
+parser_e_absolute_only_one_var=03095_E_Absolute s¢ pode estar associada a uma vari vel
+% You cannot specify more than one variable before the \var{absolute} directive.
+% Thus, the following construct will provide this error:
+% \begin{verbatim}
+% Var Z : Longint;
+%     X,Y : Longint absolute Z;
+% \end{verbatim}
+parser_e_absolute_only_to_var_or_const=03096_E_Absolute s¢ pode estar associada com uma vari vel ou constante
+% The address of an \var{absolute} directive can only point to a variable or
+% constant. Therefore, the following code will produce this error:
+% \begin{verbatim}
+%   Procedure X;
+%
+%  var p : longint absolute x;
+% \end{verbatim}
+parser_e_initialized_only_one_var=03097_E_Apenas uma vari vel pode ser inicializada
+% You cannot specify more than one variable with a initial value in Delphi mode.
+parser_e_abstract_no_definition=03098_E_M‚todos abstratos nÆo devem ter qualquer defini‡Æo (com corpo fun‡Æo)
+% Abstract methods can only be declared, you cannot implement them. They
+% should be overridden by a descendant class.
+parser_e_overloaded_must_be_all_global=03099_E_Esta fun‡Æo sobrecarregada nÆo pode ser local (deve ser exportada)
+% You are defining an overloaded function in the implementation part of a unit,
+% but there is no corresponding declaration in the interface part of the unit.
+parser_w_virtual_without_constructor=03100_W_M‚todos virtuais sÆo usados sem um construtor em "$1"
+% If you declare objects or classes that contain virtual methods, you need
+% to have a constructor and destructor to initialize them. The compiler
+% encountered an object or class with virtual methods that doesn't have
+% a constructor/destructor pair.
+parser_c_macro_defined=03101_CL_Macro definida: $1
+% When \var{-vc} is used, the compiler tells you when it defines macros.
+parser_c_macro_undefined=03102_CL_Macro indefinida: $1
+% When \var{-vc} is used, the compiler tells you when it undefines macros.
+parser_c_macro_set_to=03103_CL_Macro $1 ajustada para $2
+% When \var{-vc} is used, the compiler tells you what values macros get.
+parser_i_compiling=03104_I_Compilando $1
+% When you turn on information messages (\var{-vi}), the compiler tells you
+% what units it is recompiling.
+parser_u_parsing_interface=03105_UL_Analisando interface da unidade $1
+% This tells you that the reading of the interface
+% of the current unit has started
+parser_u_parsing_implementation=03106_UL_Analisando implementa‡Æo de $1
+% This tells you that the code reading of the implementation
+% of the current unit, library or program starts
+parser_d_compiling_second_time=03107_DL_Compilando $1 uma segunda vez
+% When you request debug messages (\var{-vd}) the compiler tells you what
+% units it recompiles for the second time.
+parser_e_no_property_found_to_override=03109_E_Nenhuma propriedade encontrada para sobrepor
+% You want to override a property of a parent class, when there is, in fact,
+% no such property in the parent class.
+parser_e_only_one_default_property=03110_E_Apenas uma propriedade padrÆo ‚ permitida
+% You specified a property as \var{Default}, but the class already has a
+% default property, and a class can have only one default property.
+parser_e_property_need_paras=03111_E_A propriedade padrÆo deve ser uma propriedade matriz
+% Only array properties of classes can be made \var{default} properties.
+parser_e_constructor_cannot_be_not_virtual=03112_E_Construtores virtuais sÆo suportados apenas modelo objeto classe
+% You cannot have virtual constructors in objects. You can only have them
+% in classes.
+parser_e_no_default_property_available=03113_E_Nenhuma propriedade padrÆo dispon¡vel
+% You are trying to access a default property of a class, but this class (or one of
+% its ancestors) doesn't have a default property.
+parser_e_cant_have_published=03114_E_A classe nÆo pode ter uma se‡Æo PUBLISHED, use a chave {$M+}
+% If you want a \var{published} section in a class definition, you must
+% use the \var{\{\$M+\}} switch, which turns on generation of type
+% information.
+parser_e_forward_declaration_must_be_resolved=03115_E_Declara‡Æo posterior da classe "$1" deve ser resolvida aqui para usar a classe como ancestral
+% To be able to use an object as an ancestor object, it must be defined
+% first. This error occurs in the following situation:
+% \begin{verbatim}
+%  Type ParentClas = Class;
+%       ChildClass = Class(ParentClass)
+%         ...
+%       end;
+% \end{verbatim}
+% where \var{ParentClass} is declared but not defined.
+parser_e_no_local_operator=03116_E_Operadores locais nÆo suportados
+% You cannot overload locally, i.e. inside procedures or function
+% definitions.
+parser_e_proc_dir_not_allowed_in_interface=03117_E_Diretiva procedimento "$1" nÆo permitida na se‡Æo interface
+% This procedure directive is not allowed in the \var{interface} section of
+% a unit. You can only use it in the \var{implementation} section.
+parser_e_proc_dir_not_allowed_in_implementation=03118_E_Diretiva procedimento "$1" nÆo permitida na se‡Æo implementa‡Æo
+% This procedure directive is not allowed in the \var{implementation} section of
+% a unit. You can only use it in the \var{interface} section.
+parser_e_proc_dir_not_allowed_in_procvar=03119_E_Diretiva procedimento "$1" nÆo permitida na declara‡Æo procvar
+% This procedure directive cannot be part of a procedural or function
+% type declaration.
+parser_e_function_already_declared_public_forward=03120_E_Fun‡Æo j  declarada como P£blica/Posterior "$1"
+% You will get this error if a function is defined as \var{forward} twice.
+% Or if it occurs in the \var{interface} section, and again as a \var{forward}
+% declaration in the \var{implementation} section.
+parser_e_not_external_and_export=03121_E_Imposs¡vel usar ambos EXPORT e EXTERNAL
+% These two procedure directives are mutually exclusive.
+parser_w_not_supported_for_inline=03123_W_"$1" nÆo suportado ainda dentro procedimento/fun‡Æo em linha
+% Inline procedures don't support this declaration.
+parser_w_inlining_disabled=03124_W_Procedimentos em linha desabilitados
+% Inlining of procedures is disabled.
+parser_i_writing_browser_log=03125_I_Gravando hist¢rio Navegador $1
+% When information messages are on, the compiler warns you when it
+% writes the browser log (generated with the \var{\{\$Y+ \}} switch).
+parser_h_maybe_deref_caret_missing=03126_H_Talvez desreferˆncia de ponteiro esteja faltando
+% The compiler thinks that a pointer may need a dereference.
+parser_f_assembler_reader_not_supported=03127_F_Leitor assembler selecionado nÆo suportado
+% The selected assembler reader (with \var{\{\$ASMMODE xxx\}} is not
+% supported. The compiler can be compiled with or without support for a
+% particular assembler reader.
+parser_e_proc_dir_conflict=03128_E_Diretiva procedimento "$1" tem conflitos com outras diretivas
+% You specified a procedure directive that conflicts with other directives.
+% For instance \var{cdecl} and \var{pascal} are mutually exclusive.
+parser_e_call_convention_dont_match_forward=03129_E_Conven‡Æo de chamada nÆo coincide com declara‡Æo posterior
+% This error happens when you declare a function or procedure with
+% e.g. \var{cdecl;} but omit this directive in the implementation, or vice
+% versa. The calling convention is part of the function declaration, and
+% must be repeated in the function definition.
+parser_e_property_cant_have_a_default_value=03131_E_Propriedade nÆo pode ter um valor padrÆo
+% Set properties or indexed properties cannot have a default value.
+parser_e_property_default_value_must_const=03132_E_O valor padrÆo de um propriedade deve ser uma constante
+% The value of a \var{default} declared property must be known at compile
+% time. The value you specified is only known at run time. This happens
+% e.g. if you specify a variable name as a default value.
+parser_e_cant_publish_that=03133_E_S¡mbolo nÆo pode ser PUBLISHED, pode ser apenas uma classe
+% Only class type variables can be in a \var{published} section of a class
+% if they are not declared as a property.
+parser_e_cant_publish_that_property=03134_E_Este tipo de propriedade nÆo pode ser PUBLISHED
+% Properties in a \var{published} section cannot be array properties.
+% They must be moved to public sections. Properties in a \var{published}
+% section must be an ordinal type, a real type, strings or sets.
+parser_e_empty_import_name=03136_E_Um nome importa‡Æo ‚ requerido
+% Some targets need a name for the imported procedure or a \var{cdecl} specifier.
+parser_e_division_by_zero=03138_E_DivisÆo por zero
+% A division by zero was encounted.
+parser_e_invalid_float_operation=03139_E_Opera‡Æo ponto flutuante inv lida
+% An operation on two real type values produced an overflow or a division
+% by zero.
+parser_e_array_lower_less_than_upper_bound=03140_E_Limite superior da faixa ‚ menor que o limite inferior
+% The upper bound of an array declaration is less than the lower bound and this
+% is not possible.
+parser_w_string_too_long=03141_W_'String' "$1" ‚ maior que "$2"
+% The size of the constant string is larger than the size you specified in
+% string type definition.
+parser_e_string_larger_array=03142_E_Comprimento 'String' ‚ maior que o comprimento da matriz de caractere
+% The size of the constant string is larger than the size you specified in
+% the \var{Array[x..y] of char} definition.
+parser_e_ill_msg_expr=03143_E_ExpressÆo ilegal ap¢s diretiva mensagem
+% \fpc supports only integer or string values as message constants.
+parser_e_ill_msg_param=03144_E_Manipuladores mensagens podem ter apenas uma chamada por parƒmetro referˆncia
+% A method declared with the \var{message} directive as message handler
+% can take only one parameter which must be declared as call by reference.
+% Parameters are declared as call by reference using the \var{var}-directive.
+parser_e_duplicate_message_label=03145_E_R¢tulo mensagem duplicado: "$1"
+% A label for a message is used twice in one object/class.
+parser_e_self_in_non_message_handler=03146_E_Self pode ser um parƒmetro expl¡cito apenas em m‚todos que sÆo manipuladores de mensagens
+% The \var{Self} parameter can only be passed explicitly to a method which
+% is declared as message handler.
+parser_e_threadvars_only_sg=03147_E_Threadvars podem ser apenas est ticas ou globais
+% Threadvars must be static or global; you can't declare a thread
+% local to a procedure. Local variables are always local to a thread,
+% because every thread has its own stack and local variables
+% are stored on the stack.
+parser_f_direct_assembler_not_allowed=03148_F_Assembler direto nÆo suportado para formato de sa¡da bin rio
+% You can't use direct assembler when using a binary writer. Choose an
+% other output format or use another assembler reader.
+parser_w_no_objpas_use_mode=03149_W_NÆo carregue a unidade OBJPAS manualmente, use \{\$mode objfpc\} ou \{\$mode delphi\}
+% You are trying to load the \file{ObjPas} unit manually from a \var{uses} clause.
+% This is not a good idea. Use the \var{\{\$MODE OBJFPC\}} or
+% \var{\{\$mode delphi\}} directives which load the unit automatically.
+parser_e_no_object_override=03150_E_OVERRIDE nÆo pode ser usado em objetos
+% \var{Override} is not supported for objects, use \var{virtual} instead to override
+% a method of a parent object.
+parser_e_cant_use_inittable_here=03151_E_Tipos de dados que requerem inicializa‡Æo/finaliza‡Æo nÆo podem ser usados em registros variant
+% Some data types (e.g. \var{ansistring}) need initialization/finalization
+% code which is implicitly generated by the compiler. Such data types
+% can't be used in the variant part of a record.
+parser_e_resourcestring_only_sg=03152_E_Recursos 'String' podem ser apenas est ticos ou globais
+% Resourcestring can not be declared local, only global or using the static
+% directive.
+parser_e_exit_with_argument_not__possible=03153_E_EXIT com argumentos nÆo pode ser usado aqui
+% An exit statement with an argument for the return value can't be used here. This
+% can happen for example in \var{try..except} or \var{try..finally} blocks.
+parser_e_stored_property_must_be_boolean=03154_E_O tipo do s¡mbolo de armazenamento deve ser boleano
+% If you specify a storage symbol in a property declaration, it must be a
+% boolean type.
+parser_e_ill_property_storage_sym=03155_E_Este s¡mbolo nÆo ‚ permitido como s¡mbolo de armazenamento
+% You can't use this type of symbol as storage specifier in property
+% declaration. You can use only methods with the result type boolean,
+% boolean class fields or boolean constants.
+parser_e_only_publishable_classes_can_be_published=03156_E_Apenas classes que sÆo compiladas no modo $M+ podem ser PUBLISHED
+% A class-typed field in the published section of a class can only be a class which was
+% compiled in \var{\{\$M+\}} or which is derived from such a class. Normally
+% such a class should be derived from \var{TPersistent}.
+parser_e_proc_directive_expected=03157_E_Diretiva procedimento esperada
+% This error is triggered when you have a \var{\{\$Calling\}} directive without
+% a calling convention specified.
+% It also happens when declaring a procedure in a const block and you
+% used a ; after a procedure declaration which must be followed by a
+% procedure directive.
+% Correct declarations are:
+% \begin{verbatim}
+% const
+%   p : procedure;stdcall=nil;
+%   p : procedure stdcall=nil;
+% \end{verbatim}
+parser_e_invalid_property_index_value=03158_E_O valor de um ¡ndice de propriedade deve ser do tipo ordinal
+% The value you use to index a property must be of an ordinal type, for
+% example an integer or enumerated type.
+parser_e_procname_to_short_for_export=03159_E_Nome procedimento muito curto para ser exportado
+% The length of the procedure/function name must be at least 2 characters
+% long. This is because of a bug in dlltool which doesn't parse the .def
+% file correctly with a name of length 1.
+parser_e_dlltool_unit_var_problem=03160_E_Nenhuma entrada DEFFILE pode ser gerada para vars. globais unidade
+parser_e_dlltool_unit_var_problem2=03161_E_Compile sem a op‡Æo -WD
+% You need to compile this file without the -WD switch on the
+% command line.
+parser_f_need_objfpc_or_delphi_mode=03162_F_Vocˆ precisa do modo ObjFpc (-S2) ou Delphi (-Sd) para compilar este m¢dulo
+% You need to use \var{\{\$MODE OBJFPC\}} or \var{\{\$MODE DELPHI\}} to compile this file.
+% Or use the corresponding command line switch, either \var{-Mobjfpc} or \var{-MDelphi.}
+parser_e_no_export_with_index_for_target=03163_E_Imposs¡vel exportar com ¡ndice sob $1
+% Exporting of functions or procedures with a specified index is not
+% supported on this target.
+parser_e_no_export_of_variables_for_target=03164_E_Exporta‡Æo de vari veis nÆo ‚ suportada sob $1
+% Exporting of variables is not supported on this target.
+parser_e_improper_guid_syntax=03165_E_Sintaxe GUID impr¢pria
+% The GUID indication does not have the proper syntax. It should be of the form
+% \begin{verbatim}
+% {XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}
+% \end{verbatim}
+% Where each \var{X} represents a hexadecimal digit.
+parser_w_interface_mapping_notfound=03168_W_Procedimento chamado "$1" que fosse adequado … implementa‡Æo de $2.$3 nÆo encontrado
+% The compiler cannot find a suitable procedure which implements the given method of an interface.
+% A procedure with the same name is found, but the arguments do not match.
+parser_e_interface_id_expected=03169_E_Identificador interface esperado
+% This happens when the compiler scans a \var{class} declaration that contains
+% \var{interface} function name mapping code like this:
+% \begin{verbatim}
+% type
+%   TMyObject = class(TObject, IDispatch)
+%     function IUnknown.QueryInterface=MyQueryInterface;
+%     ....
+% \end{verbatim}
+% and the \var{interface} before the dot is not listed in the inheritance list.
+parser_e_type_cant_be_used_in_array_index=03170_E_Tipo "$1" nÆo pode ser usado como tipo ¡ndice matriz
+% Types like \var{qword} or \var{int64} aren't allowed as array index type.
+parser_e_no_con_des_in_interfaces=03171_E_Construtor e destruidor nÆo permitidos em interfaces
+% Constructor and destructor declarations aren't allowed in interfaces.
+% In the most cases method \var{QueryInterface} of \var{IUnknown} can
+% be used to create a new interface.
+parser_e_no_access_specifier_in_interfaces=03172_E_Especificadores de acesso nÆo podem ser usados em INTERFACEs e OBJCPROTOCOLs
+% The access specifiers \var{public}, \var{private}, \var{protected} and
+% \var{published} can't be used in interfaces, Objective-C protocols and categories because all methods
+% of an interface/protocol/category must be public.
+parser_e_no_vars_in_interfaces=03173_E_Uma interface ou protocolo Objective-C ou categoria nÆo pode conter campos
+% Declarations of fields are not allowed in interfaces and Objective-C protocols and categories.
+% An interface/protocol/category can contain only methods and properties with method read/write specifiers.
+parser_e_no_local_proc_external=03174_E_Imposs¡ve declarar procedimento local como EXTERNAL
+% Declaring local procedures as external is not possible. Local procedures
+% get hidden parameters that will make the chance of errors very high.
+parser_w_skipped_fields_before=03175_W_Alguns campos que vˆm antes de "$1" nÆo foram inicializados
+% In Delphi mode, not all fields of a typed constant record have to be
+% initialized, but the compiler warns you when it detects such situations.
+parser_e_skipped_fields_before=03176_E_Alguns campos que vˆm antes de "$1" nÆo foram inicializados
+% In all syntax modes but Delphi mode, you can't leave some fields uninitialized
+% in the middle of a typed constant record.
+parser_w_skipped_fields_after=03177_W_Alguns campos que vˆm depois de "$1" nÆo foram inicializados
+% You can leave some fields at the end of a type constant record uninitialized
+% (The compiler will initialize them to zero automatically). This may be the cause
+% of subtle problems.
+parser_e_varargs_need_cdecl_and_external=03178_E_Diretiva VarArgs (ou '...' em MacPas) sem CDecl/CPPDecl/MWPascal e External
+% The varargs directive (or the ``...'' varargs parameter in MacPas mode) can only be
+% used with procedures or functions that are declared with \var{external} and one of
+% \var{cdecl}, \var{cppdecl} and \var{mwpascal}. This functionality
+% is only supported to provide a compatible interface to C functions like printf.
+parser_e_self_call_by_value=03179_E_Self deve ser um parƒmetro normal (chamada-por-valor)
+% You can't declare \var{Self} as a const or var parameter, it must always be
+% a call-by-value parameter.
+parser_e_interface_has_no_guid=03180_E_Interface "$1" nÆo tem identifica‡Æo de interface
+% When you want to assign an interface to a constant, then the interface
+% must have a GUID value set.
+parser_e_illegal_field_or_method=03181_E_Campo classe ou identificador m‚todo "$1" desconhecido
+% Properties must refer to a field or method in the same class.
+parser_w_proc_overriding_calling=03182_W_Conven‡Æo chamada sobreposi‡Æo "$1" com "$2"
+% There are two directives in the procedure declaration that specify a calling
+% convention. Only the last directive will be used.
+parser_e_no_procvarobj_const=03183_E_Constantes tipadas do tipo "procedimento de objeto" podem ser apenas inicializadas com NIL
+% You can't assign the address of a method to a typed constant which has a
+% 'procedure of object' type, because such a constant requires two addresses:
+% that of the method (which is known at compile time) and that of the object or
+% class instance it operates on (which can not be known at compile time).
+parser_e_default_value_only_one_para=03184_E_Valor padrÆo pode ser atribu¡do apenas … um parƒmetro
+% It is not possible to specify a default value for several parameters at once.
+% The following is invalid:
+% \begin{verbatim}
+% Procedure MyProcedure (A,B : Integer = 0);
+% \end{verbatim}
+% Instead, this should be declared as
+% \begin{verbatim}
+% Procedure MyProcedure (A : Integer = 0; B : Integer = 0);
+% \end{verbatim}
+parser_e_default_value_expected_for_para=03185_E_Parƒmetro padrÆo requerido para "$1"
+% The specified parameter requires a default value.
+parser_w_unsupported_feature=03186_W_Uso de caracter¡stica nÆo suportada!
+% You're trying to force the compiler into doing something it cannot do yet.
+parser_h_c_arrays_are_references=03187_H_Matrizes C sÆo passadas por referˆncia
+% Any array passed to a C function is passed
+% by a pointer (i.e. by reference).
+parser_e_C_array_of_const_must_be_last=03188_E_Matrizes de constantes C devem ser o £ltimo argumento
+% You can not add any other argument after an \var{array of const} for
+% \var{cdecl} functions, as the size pushed on stack for this argument is
+% not known.
+parser_h_type_redef=03189_H_Redefini‡Æo do tipo "$1"
+% This is an indicator that a previously declared type is
+% being redefined as something else. This may, or may not
+% be, a potential source of errors.
+parser_w_cdecl_has_no_high=03190_W_Fun‡äes declaradas com cdecl nÆo tem um parƒmetro impl¡cito extra
+% Functions declared with the \var{cdecl} modifier do not pass an extra implicit parameter.
+parser_w_cdecl_no_openstring=03191_W_Fun‡äes declaradas com cdecl nÆo suportam 'String' aberta
+% Openstring is not supported for functions that have the \var{cdecl} modifier.
+parser_e_initialized_not_for_threadvar=03192_E_Imposs¡vel inicializar vari veis declaradas como threadvar
+% Variables declared as threadvar can not be initialized with a default value.
+% The variables will always be filled with zero at the start of a new thread.
+parser_e_msg_only_for_classes=03193_E_Diretiva mensagem ‚ permitida apenas em Classes
+% The message directive is only supported for Class types.
+parser_e_procedure_or_function_expected=03194_E_Procedimento ou Fun‡Æo esperados
+% A class method can only be specified for procedures and functions.
+parser_e_illegal_calling_convention=03195_W_Diretiva conven‡Æo de chamada ignorada: "$1"
+% Some calling conventions are supported only by certain CPUs. I.e. most non-i386 ports support
+% only the standard ABI calling convention of the CPU.
+parser_e_no_object_reintroduce=03196_E_REINTRODUCE nÆo pode ser usado em objetos
+% \var{reintroduce} is not supported for objects, Objective-C classes and Objective-C protocols.
+parser_e_paraloc_only_one_para=03197_E_Cada argumento deve ter sua pr¢pria localiza‡Æo
+% If locations for arguments are specified explicitly as it is required by
+% some syscall conventions, each argument must have its own location. Things
+% like
+% \begin{verbatim}
+% procedure p(i,j : longint 'r1');
+% \end{verbatim}
+% aren't allowed.
+parser_e_paraloc_all_paras=03198_E_Cada argumento deve ter uma localiza‡Æo expl¡cita
+% If one argument has an explicit argument location, all arguments of a procedure
+% must have one.
+parser_e_illegal_explicit_paraloc=03199_E_Localiza‡Æo argumento desconhecida
+% The location specified for an argument isn't recognized by the compiler.
+parser_e_32bitint_or_pointer_variable_expected=03200_E_Inteiro 32-Bit ou vari vel ponteiro esperados
+% The libbase for MorphOS/AmigaOS can be given only as \var{longint}, \var{dword} or any pointer variable.
+parser_e_goto_outside_proc=03201_E_Declara‡Æo Goto nÆo permitida entre procedimentos diferentes
+% It isn't allowed to use \var{goto} statements referencing labels outside the
+% current procedure. The following example shows the problem:
+% \begin{verbatim}
+% ...
+%   procedure p1;
+%   label
+%     l1;
+%
+%     procedure p2;
+%     begin
+%       goto l1; // This goto ISN'T allowed
+%     end;
+%
+%   begin
+%     p2
+%   l1:
+%   end;
+% ...
+%
+% \end{verbatim}
+parser_f_too_complex_proc=03202_F_Procedimento muito complexo, ele requer muitos registradores
+% Your procedure body is too long for the compiler. You should split the
+% procedure into multiple smaller procedures.
+parser_e_illegal_expression=03203_E_ExpressÆo ilegal
+% This can occur under many circumstances. Usually when trying to evaluate
+% constant expressions.
+parser_e_invalid_integer=03204_E_ExpressÆo inteira inv lida
+% You made an expression which isn't an integer, and the compiler expects the
+% result to be an integer.
+parser_e_invalid_qualifier=03205_E_Qualifiador ilegal
+% One of the following is happening :
+% \begin{itemize}
+% \item You're trying to access a field of a variable that is not a record.
+% \item You're indexing a variable that is not an array.
+% \item You're dereferencing a variable that is not a pointer.
+% \end{itemize}
+parser_e_upper_lower_than_lower=03206_E_Limite de faixa alta < limite de faixa baixa
+% You are declaring a subrange, and the high limit is less than the low limit of
+% the range.
+parser_e_macpas_exit_wrong_param=03207_E_Parƒmetro de sa¡da deve ser o nome do procedimento em que ele ‚ usado
+% Non local exit is not allowed. This error occurs only in mode MacPas.
+parser_e_illegal_assignment_to_count_var=03208_E_Atribui‡Æo ilegal para a vari vel for-loop "$1"
+% The type of a \var{for} loop variable must be an ordinal type.
+% Loop variables cannot be reals or strings. You also cannot assign values to
+% loop variables inside the loop (Except in Delphi and TP modes). Use a while or
+% repeat loop instead if you need to do something like that, since those
+% constructs were built for that.
+parser_e_no_local_var_external=03209_E_Imposs¡vel declarar vari vel local como EXTERNAL
+% Declaring local variables as external is not allowed. Only global variables can reference
+% external variables.
+parser_e_proc_already_external=03210_E_Procedimento j  foi declarado como EXTERNAL
+% The procedure is already declared with the EXTERNAL directive in an interface or
+% forward declaration.
+parser_w_implicit_uses_of_variants_unit=03211_W_Uso impl¡cito da unidade Variants
+% The Variant type is used in the unit without any used unit using the Variants unit. The
+% compiler has implicitly added the Variants unit to the uses list. To remove this warning
+% the Variants unit needs to be added to the uses statement.
+parser_e_no_static_method_in_interfaces=03212_E_Classe e m‚todos est ticos nÆo podem ser usados em INTERFACES
+% The specifier \var{class} and directive \var{static} can't be used in interfaces
+% because all methods of an interface must be public.
+parser_e_arithmetic_operation_overflow=03213_E_Transbordamento em opera‡Æo aritim‚tica
+% An operation on two integer values produced an overflow.
+parser_e_protected_or_private_expected=03214_E_Protected ou private esperados
+% \var{strict} can be only used together with \var{protected} or \var{private}.
+parser_e_illegal_slice=03215_E_SLICE nÆo pode ser usado fora da lista de parƒmetros
+% \var{slice} can be used only for arguments accepting an open array parameter.
+parser_e_dispinterface_cant_have_parent=03216_E_Uma DISPINTERFACE nÆo pode ter uma classe pai
+% A DISPINTERFACE is a special type of interface which can't have a parent class.
+parser_e_dispinterface_needs_a_guid=03217_E_Uma DISPINTERFACE necessita de um GUID
+% A DISPINTERFACE always needs an interface identification (a GUID).
+parser_w_overridden_methods_not_same_ret=03218_W_M‚todos susbtitu¡dos devem ter um tipo de retorno relacionados. Este c¢digo pode travar, ele depende de uma falha do analizador Delphi ("$2" ‚ sobreposto por "$1" que possue outro tipo de retorno)
+% If you declare overridden methods in a class definition, they must
+% have the same return type. Some versions of Delphi allow you to change the
+% return type of interface methods, and even to change procedures into
+% functions, but the resulting code may crash depending on the types used
+% and the way the methods are called.
+parser_e_dispid_must_be_ord_const=03219_E_IDs despacho devem ser constantes ordinais
+% The \var{dispid} keyword must be followed by an ordinal constant (the dispid index).
+parser_e_array_range_out_of_bounds=03220_E_A faixa da matriz ‚ demasiada grande
+% Regardless of the size taken up by its elements, an array cannot have more
+% than high(ptrint) elements. Additionally, the range type must be a subrange
+% of ptrint.
+parser_e_packed_element_no_var_addr=03221_E_O endere‡o nÆo pode ser obtido de elementos de matriz de bits compactados ou campos de registro
+% If you declare an array or record as \var{packed} in Mac Pascal mode
+% (or as \var{packed} in any mode with \var{\{\$bitpacking on\}}), it will
+% be packed at the bit level. This means it becomes impossible to take addresses
+% of individual array elements or record fields. The only exception to this rule
+% is in the case of packed arrays elements whose packed size is a multple of 8 bits.
+parser_e_packed_dynamic_open_array=03222_E_Matrizes dinƒmicas nÆo podem ser compactadas
+% Only regular (and possibly in the future also open) arrays can be packed.
+parser_e_packed_element_no_loop=03223_E_Elementos de matrizes de bits compactados ou campos de registro nÆo podem ser usadas como vari veis de la‡os
+% If you declare an array or record as \var{packed} in Mac Pascal mode
+% (or as \var{packed} in any mode with \var{\{\$bitpacking on\}}), it will
+% be packed at the bit level. For performance reasons, they cannot be
+% used as loop variables.
+parser_e_type_and_var_only_in_generics=03224_E_VAR e TYPE sÆo permitidos apenas em gen‚ricos
+% The usage of VAR and TYPE to declare new types inside an object is allowed only inside
+% generics.
+parser_e_cant_create_generics_of_this_type=03225_E_Este tipo nÆo pode ser um gen‚rico
+% Only Classes, Objects, Interfaces and Records are allowed to be used as generic.
+parser_w_no_lineinfo_use_switch=03226_W_NÆo caregue a unidade LINEINFO manualmente, Em vez disso utilize a chave de compilador -gl
+% Do not use the \file{lineinfo} unit directly, Use the \var{-gl} switch which
+% automatically adds the correct unit for reading the selected type of debugging
+% information. The unit that needs to be used depends on the type of
+% debug information used when compiling the binary.
+parser_e_no_funcret_specified=03227_E_Nenhum tipo de retorno de fun‡Æo especificado para a fun‡Æo "$1"
+% The first time you declare a function you have to declare it completely,
+% including all parameters and the result type.
+parser_e_special_onlygenerics=03228_E_Especializa‡Æo ‚ suportado apenas por tipos gen‚ricos
+% Types which are not generics can't be specialized.
+parser_e_no_generics_as_params=03229_E_Gen‚ricos nÆo podem ser usados como parƒmetros quando especializando gen‚ricos
+% When specializing a generic, only non-generic types can be used as parameters.
+parser_e_type_object_constants=03230_E_Constantes de objetos contendo uma VMT nÆo sÆo permitidas
+% If an object requires a VMT either because it contains a constructor or virtual methods,
+% it's not allowed to create constants of it. In TP and Delphi mode this is allowed
+% for compatibility reasons.
+parser_e_label_outside_proc=03231_E_Obter o endere‡o de r¢tulos definidos fora do escopo atual nÆo ‚ permitido
+% It isn't allowed to take the address of labels outside the
+% current procedure.
+parser_e_initialized_not_for_external=03233_E_Imposs¡vel inicializar vari veis declaradas como externas
+% Variables declared as external can not be initialized with a default value.
+parser_e_illegal_function_result=03234_E_Tipo de retorno de fun‡Æo ilegal
+% Some types like file types can not be used as function result.
+parser_e_no_common_type=03235_E_Nenhum tipo comum entre "$1" e "$2"
+% To perform an operation on integers, the compiler converts both operands
+% to their common type, which appears to be an invalid type. To determine the
+% common type of the operands, the compiler takes the minimum of the minimal values
+% of both types, and the maximum of the maximal values of both types. The common
+% type is then minimum..maximum.
+parser_e_no_generics_as_types=03236_E_Gen‚ricos sem especializa‡Æo nÆo podem ser usadas como um tipo para uma vari vel
+% Generics must be always specialized before being used as variable type.
+parser_w_register_list_ignored=03237_W_Lista registros ‚ ignorada para rotinas assembler puras
+% When using pure assembler routines, the list with modified registers is ignored.
+parser_e_implements_must_be_class_or_interface=03238_E_Propriedade 'Implements' deve ter tipo classe ou interface
+% A property which implements an interface must be of type class or interface.
+parser_e_implements_must_have_correct_type=03239_E_Propriedade 'Implements' deve implementar interface de tipo correto, encontrado "$1" esperado "$2"
+% A property which implements an interface actually implements a different interface.
+parser_e_implements_must_read_specifier=03240_E_Propriedade 'Implements' deve ter especificador de leitura
+% A property  which implements an interface must have at least a read specifier.
+parser_e_implements_must_not_have_write_specifier=03241_E_Propriedade 'Implements' nÆo deve ter especificador de escrita
+% A property  which implements an interface may not have a write specifier.
+parser_e_implements_must_not_have_stored_specifier=03242_E_Propriedade 'Implements' nÆo deve ter especificador de armazenagem
+% A property  which implements an interface may not have a stored specifier.
+parser_e_implements_uses_non_implemented_interface=03243_E_Propriedade 'Implements' usada em interface nÆo implementada: "$1"
+% The interface which is implemented by a property is not an interface implemented by the class.
+parser_e_unsupported_real=03244_E_Ponto flutuante nÆo suportado para este alvo
+% The compiler parsed a floating point expression, but it is not supported.
+parser_e_class_doesnt_implement_interface=03245_E_Classe "$1" nÆo implementa interface "$2"
+% The delegated interface is not implemented by the class given in the implements clause.
+parser_e_class_implements_must_be_interface=03246_E_Tipo usado por implementa‡Æo deve ser uma interface
+% The \var{implements} keyword must be followed by an interface type.
+parser_e_cant_export_var_different_name=03247_E_Vari veis nÆo podem ser exportadas com um nome diferente neste alvo, adicione o nome na declara‡Æo usando a diretiva "export" (nome vari vel: $1, nome exporta‡Æo declarado: $2)
+% On most targets it is not possible to change the name under which a variable
+% is exported inside the \var{exports} statement of a library.
+% In that case, you have to specify the export name at the point where the
+% variable is declared, using the \var{export} and \var{alias} directives.
+parser_e_weak_external_not_supported=03248_E_S¡mbolos externos fracos nÆo sÆo suportados para o atual alvo
+% A "weak external" symbol is a symbol which may or may not exist at (either static
+% or dynamic) link time. This concept may not be available (or implemented yet)
+% on the current cpu/OS target.
+parser_e_forward_mismatch=03249_E_Defini‡Æo posterior tipo incompat¡vel
+% Classes and interfaces being defined forward must have the same type
+% when being implemented. A forward interface can not be changed into a class.
+parser_n_ignore_lower_visibility=03250_N_M‚todo virtual "$1" tem baixa visibilidade ($2) que a classe pai $3 ($4)
+% The virtual method overrides an method that is declared with a higher visibility. This might give
+% unexpected results. In case the new visibility is private than it might be that a call to inherited in a
+% new child class will call the higher visible method in a parent class and ignores the private method.
+parser_e_field_not_allowed_here=03251_E_Campos nÆo podem aparecer depois dem um m‚todo ou defini‡Æo propriedade, inicie uma nova se‡Æo de visibilidade primeiro
+% Once a method or property has been defined in a class or object, you cannot define any fields afterwards
+% without starting a new visibility section (such as \var{public}, \var{private}, etc.). The reason is
+% that otherwise the source code can appear ambiguous to the compiler, since it is possible to use modifiers
+% such as \var{default} and \var{register} also as field names.
+parser_e_no_local_para_def=03252_E_Parƒmetros nÆo podem conter defini‡äes locais de tipo. Use uma defini‡Æo de tipo separada em um bloco de tipos
+% In Pascal, types are not considered to be identical simply because they are semantically equivalent.
+% Two variables or parameters are only considered to be of the same type if they refer to the
+% same type definition.
+% As a result, it is not allowed to define new types inside parameter lists, because then it is impossible to
+% refer to the same type definition in the procedure headers of the interface and implementation of a unit
+% (both procedure headers would define a separate type). Keep in mind that expressions such as
+% ``file of byte'' or ``string[50]'' also define a new type.
+parser_e_abstract_and_sealed_conflict=03253_E_Conflito ABSTRACT e SEALED
+% ABSTRACT and SEALED can not be used together in one declaration
+parser_e_sealed_descendant=03254_E_Imposs¡vel criar um descendente da classe selada "$1"
+% Sealed means that class can not be derived by another class.
+parser_e_sealed_class_cannot_have_abstract_methods=03255_E_Classe selada nÆo pode ter um m‚todo abstrato
+% Sealed means that class cannot be derived. Therefore no one class is able to override an abstract method in a sealed class.
+parser_e_only_virtual_methods_final=03256_E_Apenas m‚todos virtuais podem ser finais
+% You are declaring a method as final, when it is not declared to be
+% virtual.
+parser_e_final_can_no_be_overridden=03257_E_M‚todo final nÆo pode ser sobreposto: "$1"
+% You are trying to \var{override} a virtual method of a parent class that does
+% not exist.
+parser_e_multiple_messages=03258_E_Apenas uma mensagem pode ser usada por m‚todo.
+% It is not possible to associate multiple messages with a single method.
+parser_e_invalid_enumerator_identifier=03259_E_Identificador enumerador inv lido: "$1"
+% Only "MoveNext" and "Current" enumerator identifiers are supported.
+parser_e_enumerator_identifier_required=03260_E_Identificador enumerador requerido
+% "MoveNext" or "Current" identifier must follow the \var{enumerator} modifier.
+parser_e_enumerator_movenext_is_not_valid=03261_E_M‚todo enumerador 'MoveNext' padrÆo inv lido. M‚todo deve ser uma fun‡Æo com tipo de retorno boleano e sem argumentos requeridos.
+% "MoveNext" enumerator pattern method must be a function with Boolean return type and no required arguments
+parser_e_enumerator_current_is_not_valid=03262_E_Propriedade enumerador 'Current' padrÆo inv lido. Propriedade deve ter um 'getter'.
+% "Current" enumerator pattern property must have a getter
+parser_e_only_one_enumerator_movenext=03263_E_Apenas um m‚todo enumerador 'MoveNext' ‚ permitido por classe/objeto
+% Class or Object can have only one enumerator MoveNext declaration.
+parser_e_only_one_enumerator_current=03264_E_Apenas uma propriedade enumerador 'Current' ‚ permitida por classe/objeto
+% Class or Object can have only one enumerator Current declaration.
+parser_e_for_in_loop_cannot_be_used_for_the_type=03265_E_La‡o 'for in' nÆo pode ser usado para o tipo "$1"
+% For in loop can be used not for all types. For example it can not be used for the enumerations with jumps.
+parser_e_objc_requires_msgstr=03266_E_Mensagens Objective-C requerem que seu nome seletor Objective-C seja especificado usando a diretiva "message".
+% Objective-C messages require their Objective-C name (selector name) to be specified using the \var{message `someName:'} procedure directive.
+% While bindings to other languages automatically generate such names based on the identifier you use (by replacing
+% all underscores with colons), this is unsafe since nothing prevents an Objective-C method name to contain actual
+% colons.
+parser_e_objc_no_constructor_destructor=03267_E_Objective-C nÆo tem construtores nem destruidores formais. Use as mensagens 'alloc', 'initXXX' e 'dealloc'.
+% The Objective-C language does not have any constructors or destructors. While there are some messages with a similar
+% purpose (such as \var{init} and \var{dealloc}), these cannot be identified using automatic parsers and do not
+% guarantee anything like Pascal constructors/destructors (e.g., you have to take care of only calling ``designated''
+% inherited ``constructors''). For these reasons, we have opted to follow the standard Objective-C patterns for
+% instance creation/destruction.
+parser_e_message_string_too_long=03268_E_Nome mensagem ‚ muito longo (max. 255 caracteres)
+% Due to compiler implementation reasons, message names are currently limited to 255 characters.
+parser_e_objc_message_name_too_long=03269_E_Nome s¡mbolo mensagem Objective-C para "$1" ‚ muito longo
+% Due to compiler implementation reasons, mangled message names (i.e., the symbol names used in the assembler
+% code) are currently limited to 255 characters.
+parser_h_no_objc_parent=03270_H_Definindo uma nova classe raiz Objective-C. Para derivar de outra classe raiz (ex., NSObject), especifique-a como pai da classe
+% If no parent class is specified for an Object Pascal class, then it automatically derives from TObject.
+% Objective-C classes however do not automatically derive from NSObject, because one can have multiple
+% root classes in Objective-C. For example, in the Cocoa framework both NSObject and NSProxy are root classes.
+% Therefore, you have to explicitly define a parent class (such as NSObject) if you want to derive your
+% Objective-C class from it.
+parser_e_no_objc_published=03271_E_Classes Objective-C nÆo podem ter se‡äes PUBLISHED
+% In Object Pascal, ``published'' determines whether or not RTTI is generated. Since the Objective-C runtime always needs
+% RTTI for everything, this specified does not make sense for Objective-C classes.
+parser_f_need_objc=03272_F_Este m¢dulo requer que seja especificado uma chave de modo Objective-C para ser compilado
+% This error indicates the use of Objective-C language features without an Objective-C mode switch
+% active. Enable one via the -M command line switch, or the {\$modeswitch x} directive.
+parser_e_must_use_override_objc=03273_E_M‚todos herdados podem apenas ser sobrepostos em Objective-C, adicione "OVERRIDE".
+parser_h_should_use_override_objc=03274_H_M‚todos herdados podem apenas ser sobrepostos em Objective-C, adicinone "OVERRIDE".
+% It is not possible to \var{reintroduce} methods in Objective-C like in Object Pascal. Methods with the same
+% name always map to the same virtual method entry. In order to make this clear in the source code,
+% the compiler always requires the \var{override} directive to be specified when implementing overriding
+% Objective-C methods in Pascal. If the implementation is external, this rule is relaxed because Objective-C
+% does not have any \var{override}-style keyword (since it's the default and only behaviour in that language),
+% which makes it hard for automated header conversion tools to include it everywhere.
+parser_e_objc_message_name_changed=03275_E_Nome mensagem "$1" na classe herdada ‚ diferente do nome mensagem "$2" na classe atual.
+% An overriding Objective-C method cannot have a different message name than an inherited method. The reason
+% is that these message names uniquely define the message to the Objective-C runtime, which means that
+% giving them a different message name breaks the ``override'' semantics.
+parser_e_no_objc_unique=03276_E_Ainda nÆo ‚ poss¡vel fazer c¢pias £nicas de tipos Objective-C
+% Duplicating an Objective-C type using \var{type x = type y;} is not yet supported. You may be able to
+% obtain the desired effect using \var{type x = objcclass(y) end;} instead.
+parser_e_no_category_as_types=03277_E_Categorias Objective-C nÆo podem ser usadas como tipos
+% It is not possible to declare a variable as an instance of an Objective-C category. A
+% category adds methods to the scope of an existing class, but does not define a type by itself.
+parser_e_no_category_override=03278_E_Categorias nÆo sobrepäem, mas substituem m‚todos. Use "REINTRODUCE".
+parser_e_must_use_reintroduce_objc=03279_E_M‚todos substitu¡dos podem apenas ser reintroduzidos em Objective-C, adicione "REINTRODUCE".
+parser_h_should_use_reintroduce_objc=03280_H_M‚todos substitu¡dos podem apenas ser reintroduzidos em Objective-C, adicione "REINTRODUCE".
+% A category replaces an existing method in an Objective-C class, rather than that it overrides it.
+% Calling an inherited method from an category method will call that method in
+% the extended class' parent, not in the extended class itself. The
+% replaced method in the original class is basically lost, and can no longer be
+% called or referred to. This behaviour corresponds somewhat more closely to
+% \var{reintroduce} than to \var{override} (although in case of \var{reintroduce}
+% in Object Pascal, hidden methods are still reachable via inherited).
+parser_e_implements_getter_not_default_cc=03281_E_'Getter' para implementa‡Æo interface deve usar a conven‡Æo de chamada padrÆo do alvo.
+% Interface getters are called via a helper in the run time library, and hence
+% have to use the default calling convention for the target (\var{register} on
+% i386 and x86_64, \var{stdcall} on other architectures).
+% \end{description}
+#
+# Type Checking
+#
+# 04094 is the last used one
+#
+% \section{Type checking errors}
+% This section lists all errors that can occur when type checking is
+% performed.
+% \begin{description}
+type_e_mismatch=04000_E_Tipo incompat¡vel
+% This can happen in many cases:
+% \begin{itemize}
+% \item The variable you're assigning to is of a different type than the
+% expression in the assignment.
+% \item You are calling a function or procedure with parameters that are
+% incompatible with the parameters in the function or procedure definition.
+% \end{itemize}
+type_e_incompatible_types=04001_E_Tipos incompat¡veis: obtido "$1" esperado "$2"
+% There is no conversion possible between the two types.
+% Another possiblity is that they are declared in different
+% declarations:
+% \begin{verbatim}
+% Var
+%    A1 : Array[1..10] Of Integer;
+%    A2 : Array[1..10] Of Integer;
+%
+% Begin
+%    A1:=A2; { This statement also gives this error. It
+%              is due to the strict type checking of Pascal }
+% End.
+% \end{verbatim}
+type_e_not_equal_types=04002_E_Tipos incompat¡veis entre "$1" e "$2"
+% The types are not equal.
+type_e_type_id_expected=04003_E_Identificador de tipo esperado
+% The identifier is not a type, or you forgot to supply a type identifier.
+type_e_variable_id_expected=04004_E_Identificador de vari vel esperado
+% This happens when you pass a constant to a routine (such as \var{Inc} var or \var{Dec})
+% when it expects a variable. You can only pass variables as arguments to these functions.
+type_e_integer_expr_expected=04005_E_ExpressÆo inteira esperada, mas obtido "$1"
+% The compiler expects an expression of type integer, but gets a different
+% type.
+type_e_boolean_expr_expected=04006_E_ExpressÆo boleana esperada, mas obtido "$1"
+% The expression must be a boolean type. It should be return \var{True} or
+% \var{False}.
+type_e_ordinal_expr_expected=04007_E_ExpressÆo ordinal esperada
+% The expression must be of ordinal type, i.e., maximum a \var{Longint}.
+% This happens, for instance, when you specify a second argument
+% to \var{Inc} or \var{Dec} that doesn't evaluate to an ordinal value.
+type_e_pointer_type_expected=04008_E_Tipo ponteiro esperado, mas obtido "$1"
+% The variable or expression isn't of the type \var{pointer}. This
+% happens when you pass a variable that isn't a pointer to \var{New}
+% or \var{Dispose}.
+type_e_class_type_expected=04009_E_Tipo classe esperado, mas obtido "$1"
+% The variable or expression isn't of the type \var{class}. This happens
+% typically when
+% \begin{enumerate}
+% \item The parent class in a class declaration isn't a class.
+% \item An exception handler (\var{On}) contains a type identifier that
+% isn't a class.
+% \end{enumerate}
+type_e_cant_eval_constant_expr=04011_E_Imposs¡vel avaliar expressÆo constante
+% This error can occur when the bounds of an array you declared do
+% not evaluate to ordinal constants.
+type_e_set_element_are_not_comp=04012_E_Elementos conjunto nÆo sÆo compat¡veis
+% You are trying to perform an operation on two sets, when the set element types
+% are not the same. The base type of a set must be the same when taking the
+% union.
+type_e_set_operation_unknown=04013_E_Opera‡Æo nÆo implementada para conjuntos
+% several binary operations are not defined for sets.
+% These include: \var{div}, \var{mod}, \var{**}, \var{>=} and \var{<=}.
+% The last two may be  defined for sets in the future.
+type_w_convert_real_2_comp=04014_W_ConversÆo autom tica de tipo de ponto flutuante para COMP que ‚ um inteiro
+% An implicit type conversion from a real type to a \var{comp} is
+% encountered. Since \var{comp} is a 64 bit integer type, this may indicate
+% an error.
+type_h_use_div_for_int=04015_H_Use DIV como alternativa para obter um resultado inteiro
+% When hints are on, then an integer division with the '/' operator will
+% produce this message, because the result will then be of type real.
+type_e_strict_var_string_violation=04016_E_Tipos 'String' devem coincidir exatamente no modo $V+
+% When compiling in \var{\{\$V+\}} mode, the string you pass as a parameter
+% should be of the exact same type as the declared parameter of the procedure.
+type_e_succ_and_pred_enums_with_assign_not_possible=04017_E_'SUCC' ou 'PRED' nÆo ‚ poss¡vel em enumera‡äes com atribui‡äes
+% If you declare an enumeration type which has C-like assignments
+% in it, such as in the following:
+% \begin{verbatim}
+%   Tenum = (a,b,e:=5);
+% \end{verbatim}
+% then you cannot use the \var{Succ} or \var{Pred} functions with this enumeration.
+type_e_cant_read_write_type=04018_E_Imposs¡vel ler ou gravar vari veis deste tipo
+% You are trying to \var{read} or \var{write} a variable from or to a
+% file of type text, which doesn't support that variable's type.
+% Only integer types, reals, pchars and strings can be read from or
+% written to a text file. Booleans can only be written to text files.
+type_e_no_readln_writeln_for_typed_file=04019_E_Imposs¡vel usar 'readln' ou 'writeln' em arquivos tipados
+% \var{readln} and \var{writeln} are only allowed for text files.
+type_e_no_read_write_for_untyped_file=04020_E_Impossivel usar 'read' ou 'write' em arquivos nÆo tipados.
+% \var{read} and \var{write} are only allowed for text or typed files.
+type_e_typeconflict_in_set=04021_E_Conflito de tipos entre elementos de conjunto
+% There is at least one set element which is of the wrong type, i.e. not of
+% the set type.
+type_w_maybe_wrong_hi_lo=04022_W_lo/hi(dword/qword) retorna 'upper/lower word/dword'
+% \fpc supports an overloaded version of \var{lo/hi} for \var{longint/dword/int64/qword}
+% which returns the lower/upper word/dword of the argument. \tp always uses
+% a 16 bit \var{lo/hi} which always returns bits 0..7 for \var{lo} and the
+% bits 8..15 for \var{hi}. If you want the \tp behavior you have
+% to type cast the argument to a \var{word} or \var{integer}.
+type_e_integer_or_real_expr_expected=04023_E_ExpressÆo inteira ou real esperada
+% The first argument to \var{str} must be a real or integer type.
+type_e_wrong_type_in_array_constructor=04024_E_Tipo incorreto "$1" no construtor matriz
+% You are trying to use a type in an array constructor which is not
+% allowed.
+type_e_wrong_parameter_type=04025_E_Tipos incompat¡veis para o arg. no. $1: Obtido "$2", esperado "$3"
+% You are trying to pass an invalid type for the specified parameter.
+type_e_no_method_and_procedure_not_compatible=04026_E_M‚todo (vari vel) e Procedimento (vari vel) nÆo sÆo compat¡veis
+% You can't assign a method to a procedure variable or a procedure to a
+% method pointer.
+type_e_wrong_math_argument=04027_E_Constante ilegal passada para fun‡Æo matem tica interna
+% The constant argument passed to a \var{ln} or \var{sqrt} function is out of
+% the definition range of these functions.
+type_e_no_addr_of_constant=04028_E_Imposs¡vel obter o endere‡o de expressäes constantes
+% It is not possible to get the address of a constant expression, because they
+% aren't stored in memory. You can try making it a typed constant. This error
+% can also be displayed if you try to pass a property to a var parameter.
+type_e_argument_cant_be_assigned=04029_E_Argumento nÆo pode ser atribu¡do
+% Only expressions which can be on the left side of an
+% assignment can be passed as call by reference arguments.
+%
+% Remark: Properties can be used on the left side of an assignment,
+% nevertheless they cannot be used as arguments.
+type_e_cannot_local_proc_to_procvar=04030_E_Imposs¡vel atribuir procedimento/fun‡Æo local a vari vel procedimento
+% It's not allowed to assign a local procedure/function to a
+% procedure variable, because the calling convention of a local procedure/function is
+% different. You can only assign local procedure/function to a void pointer.
+type_e_no_assign_to_addr=04031_E_Imposs¡vel atribuir valores a um endere‡o
+% It is not allowed to assign a value to an address of a variable, constant,
+% procedure or function. You can try compiling with -So if the identifier
+% is a procedure variable.
+type_e_no_assign_to_const=04032_E_Imposs¡vel atribuir valors a uma vari vel constante
+% It's not allowed to assign a value to a variable which is declared
+% as a const. This is normally a parameter declared as const. To allow
+% changing the value, pass the parameter by value, or a parameter by reference
+% (using var).
+type_e_array_required=04033_E_Tipo matriz requerido
+% If you are accessing a variable using an index '[<x>]' then
+% the type must be an array. In FPC mode a pointer is also allowed.
+type_e_interface_type_expected=04034_E_Tipo interface esperado, mas obtido "$1"
+% The compiler expected to encounter an interface type name, but got something else.
+% The following code would produce this error:
+% \begin{verbatim}
+% Type
+%   TMyStream = Class(TStream,Integer)
+% \end{verbatim}
+type_h_mixed_signed_unsigned=04035_H_Misturando expressäes assinadas e 'longwords' obtem-se um resultado de 64bits
+% If you divide (or calculate the modulus of) a signed expression by a longword (or vice versa),
+% or if you have overflow and/or range checking turned on and use an arithmetic
+% expression (+, -, *, div, mod) in which both signed numbers and longwords appear,
+% then everything has to be evaluated in 64-bit arithmetic which is slower than normal
+% 32-bit arithmetic. You can avoid this by typecasting one operand so it
+% matches the result type of the other one.
+type_w_mixed_signed_unsigned2=04036_W_Misturando expressäes assinadas e cardinais pode causar um erro de verifica‡Æo de faixa
+% If you use a binary operator (and, or, xor) and one of
+% the operands is a longword while the other one is a signed expression, then,
+% if range checking is turned on, you may get a range check error because in
+% such a case both operands are converted to longword before the operation is
+% carried out. You can avoid this by typecasting one operand so it
+% matches the result type of the other one.
+type_e_typecast_wrong_size_for_assignment=04037_E_ConversÆo de tipo tem tamanhos diferentes ($1 -> $2) na atribui‡Æo
+% Type casting to a type with a different size is not allowed when the variable is
+% used in an assignment.
+type_e_array_index_enums_with_assign_not_possible=04038_E_Enumera‡äes com atribui‡äes nÆo podem ser usadas como ¡ndice de matrizes
+% When you declared an enumeration type which has C-like
+% assignments, such as in the following:
+% \begin{verbatim}
+%   Tenum = (a,b,e:=5);
+% \end{verbatim}
+% you cannot use it as the index of an array.
+type_e_classes_not_related=04039_E_Tipos Classe ou Objeto "$1" e "$2" nÆo estÆo relacionados
+% There is a typecast from one class or object to another while the class/object
+% are not related. This will probably lead to errors.
+type_w_classes_not_related=04040_W_Tipos Classe "$1" e "$2" nÆo estÆo relacionados
+% There is a typecast from one class to another while the classes
+% are not related. This will probably lead to errors.
+type_e_class_or_interface_type_expected=04041_E_Tipo classe ou interface esperado, mas obtido "$1"
+% The compiler expected a class or interface name, but got another type or identifier.
+type_e_type_is_not_completly_defined=04042_E_Tipo "$1" nÆo est  completamente definido
+% This error occurs when a type is not complete: i.e. a pointer type which points to
+% an undefined type.
+type_w_string_too_long=04043_W_Literal 'String' tem mais caracteres que comprimento 'string' curta
+% The size of the constant string, which is assigned to a shortstring,
+% is longer than the maximum size of the shortstring (255 characters).
+type_w_signed_unsigned_always_false=04044_W_Compara‡Æo ser  sempre falsa devido a faixa de valores
+% There is a comparison between an unsigned value and a signed constant which is
+% less than zero. Because of type promotion, the statement will always evaluate to
+% false. Explicitly typecast the constant to the correct range to avoid this problem.
+type_w_signed_unsigned_always_true=04045_W_Compara‡Æo ser  sempre verdadeira devido a faixa de valores
+% There is a comparison between an unsigned value and a signed constant which is
+% less than zero. Because of type promotion, the statement will always evaluate to
+% true. Explicitly typecast the constant to the correct range to avoid this problem.
+type_w_instance_with_abstract=04046_W_Construindo uma classe "$1" com m‚todo abstrato "$2"
+% An instance of a class is created which contains non-implemented abstract
+% methods. This will probably lead to a runtime error 211 in the code if that
+% routine is ever called. All abstract methods should be overriden.
+type_h_in_range_check=04047_H_O operador esquerdo em um operador 'IN' deve ser tamanho byte
+% The left operand of the \var{in} operator is not an ordinal or enumeration which fits
+% within 8 bits. This may lead to range check errors. The \var{in} operator
+% currently only supports a left operand which fits within a byte. In the case of
+% enumerations, the size of an element of an enumeration can be controlled with
+% the \var{\{\$PACKENUM\}} or \var{\{\$Zn\}} switches.
+type_w_smaller_possible_range_check=04048_W_Tamanho tipo incompat¡vel, poss¡vel perda de dados / erro verifica‡Æo faixa
+% There is an assignment to a smaller type than the source type. This means that
+% this may cause a range-check error, or may lead to possible loss of data.
+type_h_smaller_possible_range_check=04049_H_Tamanho tipo incompat¡vel, poss¡vel perda de dados / erro verifica‡Æo faixa
+% There is an assignment to a smaller type than the source type. This means that
+% this may cause a range-check error, or may lead to possible loss of data.
+type_e_cant_take_address_of_abstract_method=04050_E_O endere‡o de um m‚todo abstrato nÆo pode ser obtido
+% An abstract method has no body, so the address of an abstract method can't be taken.
+type_e_assignment_not_allowed=04051_E_Atribui‡äes … parƒmetros formais e matrizes abertas nÆo sÆo poss¡veis
+% You are trying to assign a value to a formal (untyped var, const or out)
+% parameter, or to an open array.
+type_e_constant_expr_expected=04052_E_ExpressÆo constante esperada
+% The compiler expects an constant expression, but gets a variable expression.
+type_e_operator_not_supported_for_types=04053_E_Opera‡Æo "$1" nÆo ‚ suportada para os tipos "$2" e "$3"
+% The operation is not allowed for the supplied types.
+type_e_illegal_type_conversion=04054_E_ConversÆo de tipo ilegal: "$1" para "$2"
+% When doing a type-cast, you must take care that the sizes of the variable and
+% the destination type are the same.
+type_h_pointer_to_longint_conv_not_portable=04055_H_ConversÆo entre ordinais e ponteiros nÆo ‚ port vel
+% If you typecast a pointer to a longint (or vice-versa), this code will not compile
+% on a machine using 64 bits addressing.
+type_w_pointer_to_longint_conv_not_portable=04056_W_ConversÆo entre ordinais e ponteiros nÆo ‚ port vel
+% If you typecast a pointer to an ordinal type of a different size (or vice-versa), this can
+% cause problems. This is a warning to help in finding the 32-bit specific code where cardinal/longint is used
+% to typecast pointers to ordinals. A solution is to use the ptrint/ptruint types instead.
+type_e_cant_choose_overload_function=04057_E_Imposs¡vel determinar qual fun‡Æo sobrecarregada chamar
+% You're calling overloaded functions with a parameter that doesn't correspond
+% to any of the declared function parameter lists. e.g. when you have declared
+% a function with parameters \var{word} and \var{longint}, and then you call
+% it with a parameter which is of type \var{integer}.
+type_e_illegal_count_var=04058_E_Vari vel contador ilegal
+% The type of a \var{for} loop variable must be an ordinal type.
+% Loop variables cannot be reals or strings.
+type_w_double_c_varargs=04059_W_Convertendo constante valor real para 'double' para vari vel argumento C, adicione conversÆo de tipo expl¡cita para evitar isso.
+% In C, constant real values are double by default. For this reason, if you
+% pass a constant real value to a variable argument part of a C function, FPC
+% by default converts this constant to double as well. If you want to prevent
+% this from happening, add an explicit typecast around the constant.
+type_e_class_or_cominterface_type_expected=04060_E_Tipo Classe ou interface COM esperado, mas obtido "$1"
+% Some operators, such as the AS operator, are only applicable to classes or COM interfaces.
+type_e_no_const_packed_array=04061_E_Matrizes constantes compactadas nÆo sÆo suportadas ainda
+% You cannot declare a (bit)packed array as a typed constant.
+type_e_got_expected_packed_array=04062_E_Tipos incompat¡veis para arg. no. $1: Obtido "$2" esperado "Matriz compactada (Bits)"
+% The compiler expects a (bit)packed array as the specified parameter.
+type_e_got_expected_unpacked_array=04063_E_Tipos incompat¡veis para arg. no. $1: Obtido "$2" esperado "Matriz (nÆo compactada)"
+% The compiler expects a regular (i.e., not packed) array as the specified parameter.
+type_e_no_packed_inittable=04064_E_Elementos de matrizes compactadas nÆo podem ser de um tipo que necessita ser inicializado
+% Support for packed arrays of types that need initialization
+% (such as ansistrings, or records which contain ansistrings) is not yet implemented.
+type_e_no_const_packed_record=04065_E_Registros constantes compactadas e objetos nÆo sÆo suportados ainda
+% You cannot declare a (bit)packed array as a typed constant at this time.
+type_w_untyped_arithmetic_unportable=04066_W_Aritm‚tica "$1" em ponteiros nÆo tipados nÆo ‚ port vel {$T+}, sugere-se conversÆo de tipo
+% Addition/subtraction from an untyped pointer may work differently in \var{\{\$T+\}}.
+% Use a typecast to a typed pointer.
+type_e_cant_take_address_of_local_subroutine=04076_E_Imposs¡vel obter endere‡o de uma subrotina marcada como local
+% The address of a subroutine marked as local can't be taken.
+type_e_cant_export_local=04077_E_Imposs¡vel exportar subrotina marcada como local de uma unidade
+% A subroutine marked as local can't be exported from a unit.
+type_e_not_automatable=04078_E_Tipo nÆo ‚ automatiz vel: "$1"
+% Only byte, integer, longint, smallint, currency, single, double, ansistring,
+% widestring, tdatetime, variant, olevariant, wordbool and all interfaces are automatable.
+type_h_convert_add_operands_to_prevent_overflow=04079_H_Convertendo os operandos para "$1" antes de realizar a soma pode prevenir erros de transbordamento.
+% Adding two types can cause overflow errors. Since you are converting the result to a larger type, you
+% could prevent such errors by converting the operands to this type before doing the addition.
+type_h_convert_sub_operands_to_prevent_overflow=04080_H_Convertendo os operandos para "$1" antes de realizar a subtra‡Æo pode prevenir erros de transbordamento.
+% Subtracting two types can cause overflow errors. Since you are converting the result to a larger type, you
+% could prevent such errors by converting the operands to this type before doing the subtraction.
+type_h_convert_mul_operands_to_prevent_overflow=04081_H_Convertendo os operados para "$1" antes de realizar a multiplica‡Æo pode prevenir erros de transbordamento.
+% Multiplying two types can cause overflow errors. Since you are converting the result to a larger type, you
+% could prevent such errors by converting the operands to this type before doing the multiplication.
+type_w_pointer_to_signed=04082_W_Convertendo ponteiros para inteiros assinados poe resultar em compara‡äes de resultados incorretas e erros de faixa. Ao inv‚s disso, use tipos nÆo assinados.
+% The virtual address space on 32-bit machines runs from \$00000000 to \$ffffffff.
+% Many operating systems allow you to allocate memory above \$80000000.
+% For example both \windows and \linux allow pointers in the range \$0000000 to \$bfffffff.
+% If you convert pointers to signed types, this can cause overflow and range check errors,
+% but also \$80000000 < \$7fffffff. This can cause random errors in code like "if p>q".
+type_interface_has_no_guid=04083_E_Tipo interface $1 nÆo tem um GUID v lido
+% When applying the as-operator to an interface or class, the desired interface (i.e. the right operand of the
+% as-operator) must have a valid GUID.
+type_e_invalid_objc_selector_name=04084_E_Nome seletor inv lido "$1"
+% An Objective-C selector cannot be empty, must be a valid identifier or a single colon,
+% and if it contains at least one colon it must also end in one.
+type_e_expected_objc_method_but_got=04085_E_M‚todo Objective-C esperado, mas obtido $1
+% A selector can only be created for Objective-C methods, not for any other kind
+% of procedure/function/method.
+type_e_expected_objc_method=04086_E_M‚todo Objective-C ou nome m‚todo constante esperados
+% A selector can only be created for Objective-C methods, either by specifying
+% the name using a string constant, or by using an Objective-C method identifier
+% that is visible in the current scope.
+type_e_no_type_info=04087_E_Nenhuma informa‡Æo de tipo dispon¡vel para este tipo
+% Type information is not generated for some types, such as enumerations with gaps
+% in their value range (this includes enumerations whose lower bound is different
+% from zero).
+type_e_ordinal_or_string_expr_expected=04088_E_Ordinal ou expressÆo 'string' esperados
+% The expression must be an ordinal or string type.
+type_e_string_expr_expected=04089_E_ExpressÆo 'string' esperada
+% The expression must be a string type.
+type_w_zero_to_nil=04090_W_Convertendo 0 para NIL
+% Use NIL rather than 0 when initialising a pointer. 
+type_e_protocol_type_expected=04091_E_Tipo protocolo Objective-C esperado, mas obtido "$1"
+% The compiler expected a protocol type name, but found something else.
+type_e_objc_type_unsupported=04092_E_O tipo "$1" nÆo ‚ suportado para intera‡Æo com c¢digo Objective-C de tempo execu‡Æo.
+% Objective-C makes extensive use of run time type information (RTTI). This format
+% is defined by the maintainers of the run time and can therefore not be adapted
+% to all possible Object Pascal types. In particular, types that depend on
+% reference counting by the compiler (such as ansistrings and certain kinds of
+% interfaces) cannot be used as fields of Objective-C classes, cannot be
+% directly passed to Objective-C methods, and cannot be encoded using \var{objc\_encode}.
+type_e_class_or_objcclass_type_expected=04093_E_Tipo classe ou 'objcclass' esperados, mas obtido "$1"
+% It is only possible to create class reference types of \var{class} and \var{objcclass}
+type_e_objcclass_type_expected=04094_E_Tipo 'Objcclass' esperado
+% The compiler expected an Objc
+% \var{objcclass} types
+%
+% \end{description}
+#
+# Symtable
+#
+# 05070 is the last used one
+#
+% \section{Symbol handling}
+% This section lists all the messages that concern the handling of symbols.
+% This means all things that have to do with procedure and variable names.
+% \begin{description}
+sym_e_id_not_found=05000_E_Identificador nÆo encontrado "$1"
+% The compiler doesn't know this symbol. Usually happens when you misspell
+% the name of a variable or procedure, or when you forget to declare a
+% variable.
+sym_f_internal_error_in_symtablestack=05001_F_Erro interno em SymTableStack()
+% An internal error occurred in the compiler; If you encounter such an error,
+% please contact the developers and try to provide an exact description of
+% the circumstances in which the error occurs.
+sym_e_duplicate_id=05002_E_Identificador duplicado "$1"
+% The identifier was already declared in the current scope.
+sym_h_duplicate_id_where=05003_H_Identificador j  definido em $1 na linha $2
+% The identifier was already declared in a previous scope.
+sym_e_unknown_id=05004_E_Identificador desconhecido "$1"
+% The identifier encountered has not been declared, or is used outside the
+% scope where it is defined.
+sym_e_forward_not_resolved=05005_E_Declara‡Æo posterior nÆo resolvida "$1"
+% This can happen in two cases:
+% \begin{itemize}
+% \item You declare a function in the \var{interface} part, or
+% with a \var{forward} directive, but do not implement it.
+% \item You reference a type which isn't declared in the current \var{type}
+% block.
+% \end{itemize}
+sym_e_error_in_type_def=05007_E_Erro na defini‡Æo de tipo
+% There is an error in your definition of a new array type.
+% One of the range delimiters in an array declaration is erroneous.
+% For example, \var{Array [1..1.25]} will trigger this error.
+sym_e_forward_type_not_resolved=05009_E_Tipo posterior nÆo resolvido "$1"
+% A symbol was forward defined, but no declaration was encountered.
+sym_e_only_static_in_static=05010_E_Apenas vari veis est ticas podem ser usadas em m‚todos est ticos ou m‚todos externos
+% A static method of an object can only access static variables.
+sym_f_type_must_be_rec_or_class=05012_F_Tipo registro ou classe esperados
+% The variable or expression isn't of the type \var{record} or \var{class}.
+sym_e_no_instance_of_abstract_object=05013_E_Instƒncias de classes ou objetos com m‚todos abstratos nÆo sÆo permitidas
+% You are trying to generate an instance of a class which has an abstract
+% method that wasn't overridden.
+sym_w_label_not_defined=05014_W_R¢tulo nÆo definido "$1"
+% A label was declared, but not defined.
+sym_e_label_used_and_not_defined=05015_E_R¢tulo usado mas nÆo definido "$1"
+% A label was declared and used, but not defined.
+sym_e_ill_label_decl=05016_E_Declara‡Æo r¢tulo ilegal
+% This error should never happen; it occurs if a label is defined outside a
+% procedure or function.
+sym_e_goto_and_label_not_supported=05017_E_GOTO e LABEL nÆo sÆo suportados (use a chave -Sg)
+% You must use the -Sg switch to compile a program which has \var{label}s
+% and \var{goto} statements. By default, \var{label} and \var{goto} aren't
+% supported.
+sym_e_label_not_found=05018_E_R¢tulo nÆo encontrado
+% A \var{goto label} was encountered, but the label wasn't declared.
+sym_e_id_is_no_label_id=05019_E_Identificador nÆo ‚ um r¢tulo
+% The identifier specified after the \var{goto} isn't of type label.
+sym_e_label_already_defined=05020_E_R¢tulo j  definido
+% You are defining a label twice. You can define a label only once.
+sym_e_ill_type_decl_set=05021_E_Declara‡Æo de tipo de conjunto de elementos ilegal
+% The declaration of a set contains an invalid type definition.
+sym_e_class_forward_not_resolved=05022_E_Declara‡Æo posterior de classe nÆo resolvida "$1"
+% You declared a class, but you did not implement it.
+sym_n_unit_not_used=05023_H_Unidade "$1" nÆo usada em $2
+% The unit referenced in the \var{uses} clause is not used.
+sym_h_para_identifier_not_used=05024_H_Parƒmetro "$1" nÆo usado
+% The identifier was declared (locally or globally) but
+% was not used (locally or globally).
+sym_n_local_identifier_not_used=05025_N_Vari vel local "$1" nÆo usada
+% You have declared, but not used, a variable in a procedure or function
+% implementation.
+sym_h_para_identifier_only_set=05026_H_Valor parƒmetro "$1" ‚ atribu¡do mas nunca usado
+% The identifier was declared (locally or globally) and
+% assigned to, but is not used (locally or globally) after the assignment.
+sym_n_local_identifier_only_set=05027_N_Vari vel local "$1" ‚ atribu¡da mas nunca usada
+% The variable in a procedure or function implementation is declared and
+% assigned to, but is not used after the assignment.
+sym_h_local_symbol_not_used=05028_H_Local $1 "$2" nÆo ‚ usado
+% A local symbol is never used.
+sym_n_private_identifier_not_used=05029_N_Campo privado "$1.$2" nunca usado
+% The indicated private field is defined, but is never used in the code.
+sym_n_private_identifier_only_set=05030_N_Campo privado "$1.$2" ‚ atribu¡do mas nunca usado
+% The indicated private field is declared and assigned to, but never read.
+sym_n_private_method_not_used=05031_N_M‚todo privado "$1.$2" nunca usado
+% The indicated private method is declared but is never used in the code.
+sym_e_set_expected=05032_E_Tipo conjunto esperado
+% The variable or expression is not of type \var{set}. This happens in an
+% \var{in} statement.
+sym_w_function_result_not_set=05033_W_Retorno da fun‡Æo parece nÆo ter sido ajustado
+% You can get this warning if the compiler thinks that a function return
+% value is not set. This will not be displayed for assembler procedures,
+% or procedures that contain assembler blocks.
+sym_w_wrong_C_pack=05034_W_Tipo "$1" nÆo est  alinhado corretamente no atual registro para C
+% Arrays with sizes not multiples of 4 will be wrongly aligned
+% for C structures.
+sym_e_illegal_field=05035_E_Identificador de campo de registro desconhecido "$1"
+% The field doesn't exist in the record/object definition.
+sym_w_uninitialized_local_variable=05036_W_Vari vel local "$1" nÆo parece ter sido inicializada
+% This message is displayed if the compiler thinks that a variable will
+% be used (i.e. it appears in the right-hand side of an expression) when it
+% was not initialized first (i.e. appeared in the left-hand side of an
+% assignment).
+sym_w_uninitialized_variable=05037_W_Vari vel "$1" parece nÆo ter sido inicializada
+% This message is displayed if the compiler thinks that a variable will
+% be used (i.e. it appears in the right-hand side of an expression) when it
+% was not initialized first (i.e. appeared in the left-hand side of an
+% assignment).
+sym_e_id_no_member=05038_E_Identificador nÆo identifica nenhum membro "$1"
+% This error is generated when an identifier of a record,
+% field or method is accessed while it is not defined.
+sym_h_param_list=05039_H_Declara‡Æo encontrada: $1
+% You get this when you use the \var{-vh} switch.In the case of an overloaded procedure
+% not being found. Then all candidate overloaded procedures are
+% listed, with their parameter lists.
+sym_e_segment_too_large=05040_E_Elemento de dados muito grande
+% You get this when you declare a data element whose size exceeds the
+% prescribed limit (2 Gb on 80386+/68020+ processors).
+sym_e_no_matching_implementation_found=05042_E_Nenhuma implementa‡Æo coincidente para m‚todo interface "$1" encontrada
+% There was no matching method found which could implement the interface
+% method. Check argument types and result type of the methods.
+sym_w_deprecated_symbol=05043_W_S¡mbolo "$1" est  depreciado
+% This means that a symbol (a variable, routine, etc...) which is
+% declared as \var{deprecated} is used. Deprecated symbols may no longer
+% be available in newer versions of the unit / library. Use of this symbol
+% should be avoided as much as possible.
+sym_w_non_portable_symbol=05044_W_S¡mbolo "$1" nÆo ‚ port vel
+% This means that a symbol (a variable, routine, etc...) which is
+% declared as \var{platform} is used. This symbol's value, use
+% and availability is platform specific and should not be used
+% if the source code must be portable.
+sym_w_non_implemented_symbol=05055_W_S¡mbolo "$1" nÆo est  implementado
+% This means that a symbol (a variable, routine, etc...) which is
+% declared as \var{unimplemented} is used. This symbol is defined,
+% but is not yet implemented on this specific platform.
+sym_e_cant_create_unique_type=05056_E_Imposs¡vel criar tipo £nico para este tipo
+% Only simple types like ordinal, float and string types are supported when
+% redefining a type with \var{type newtype = type oldtype;}.
+sym_h_uninitialized_local_variable=05057_H_Vari vel local "$1" parece nÆo ter sido inicializada
+% This message is displayed if the compiler thinks that a variable will
+% be used (i.e. it appears in the right-hand side of an expression) when it
+% was not initialized first (i.e. it did not appear in the left-hand side of an
+% assignment).
+sym_h_uninitialized_variable=05058_H_Vari vel "$1" parece nÆo ter sido inicializada
+% This message is displayed if the compiler thinks that a variable will
+% be used (i.e. it appears in the right-hand side of an expression) when it
+% was not initialized first (i.e. t did not appear in the left-hand side of an
+% assignment).
+sym_w_function_result_uninitialized=05059_W_Vari vel de retorno da fun‡Æo parece nÆo ter sido inicializada
+% This message is displayed if the compiler thinks that the function result
+% variable will be used (i.e. it appears in the right-hand side of an expression)
+% before it is initialized (i.e. before it appeared in the left-hand side of an
+% assignment).
+sym_h_function_result_uninitialized=05060_H_Vari vel de retorno da fun‡Æo parece nÆo ter sido inicializada
+% This message is displayed if the compiler thinks that the function result
+% variable will be used (i.e. it appears in the right-hand side of an expression)
+% before it is initialized (i.e. it appears in the left-hand side of an
+% assignment)
+sym_w_identifier_only_read=05061_W_Vari vel "$1" lida mas nÆo atribu¡da em lugar algum
+% You have read the value of a variable, but nowhere assigned a value to
+% it.
+sym_h_abstract_method_list=05062_H_M‚todo abstrato encontrado: $1
+% When getting a warning about constructing a class/object with abstract methods
+% you get this hint to assist you in finding the affected method.
+sym_w_experimental_symbol=05063_W_S¡mbolo "$1" ‚ experimental
+% This means that a symbol (a variable, routine, etc...) which is
+% declared as \var{experimental} is used. Experimental symbols
+% might disappear or change semantics in future versions. Usage of this symbol
+% should be avoided as much as possible.
+sym_w_forward_not_resolved=05064_W_Declara‡Æo posterior "$1" nÆo resolvida, assumida como externa
+% This happens if you declare a function in the \var{interface} of a unit in macpas mode,
+% but do not implement it.
+sym_w_library_symbol=05065_W_S¡mbolo "$1" pertence a uma biblioteca
+% This means that a symbol (a variable, routine, etc...) which is
+% declared as \var{library} is used. Library symbols may not be
+% available in other libraries.
+sym_w_deprecated_symbol_with_msg=05066_W_S¡mbolo "$1" est  depreciado: "$2"
+% This means that a symbol (a variable, routine, etc...) which is
+% declared as \var{deprecated} is used. Deprecated symbols may no longer
+% be available in newer versions of the unit / library. Use of this symbol
+% should be avoided as much as possible.
+sym_e_no_enumerator=05067_E_Imposs¡vel encontrar um enumerador para o tipo "$1"
+% This means that compiler can not find an apropriate enumerator to use in the for-in loop.
+% To create an enumerator you need to defind an operator enumerator or add a public or published 
+% GetEnumerator method to the class or object definition.
+sym_e_no_enumerator_move=05068_E_Imposs¡vel encontrar um m‚todo "MoveNext" no enumerador "$1"
+% This means that compiler can not find a public MoveNext method with the Boolean return type in
+% the enumerator class or object definition.
+sym_e_no_enumerator_current=05069_E_Imposs¡vel encontrar uma propriedade "Current" no enumerador "$1"
+% This means that compiler can not find a public Current property in  the enumerator class or object 
+% definition.
+sym_e_objc_para_mismatch=05070_E_Incompatibilidade entre n£mero de parƒmetros declarados e n£mero de dois pontos (:) na 'string' mensagem.
+% In Objective-C, a message name automatically contains as many colons as parameters.
+% In order to prevent mistakes when specifying the message name in FPC, the compiler
+% checks whether this is also the case here. Note that in case of messages taking a
+% variable number of arguments translated to FPC via an \var{array of const} parameter,
+% this final \var{array of const} parameter is not counted. Neither are the hidden
+% \var{self} and \var{\_cmd} parameters.
+% \end{description}
+#
+# Codegenerator
+#
+# 06049 is the last used one
+#
+% \section{Code generator messages}
+% This section lists all messages that can be displayed if the code
+% generator encounters an error condition.
+% \begin{description}
+cg_e_parasize_too_big=06009_E_Tamanho da lista de parƒmetros excede 65535 bytes
+% The I386 processor limits the parameter list to 65535 bytes. (The \var{RET}
+% instruction causes this.)
+cg_e_file_must_call_by_reference=06012_E_Tipos Arquivos devem ser parƒmetros var.
+% You cannot specify files as value parameters, i.e., they must always be
+% declared \var{var} parameters.
+cg_e_cant_use_far_pointer_there=06013_E_O uso de ponteiro distante nÆo ‚ permitido l 
+% Free Pascal doesn't support far pointers, so you cannot take the address of
+% an expression which has a far reference as a result. The \var{mem} construct
+% has a far reference as a result, so the following code will produce this
+% error:
+% \begin{verbatim}
+% var p : pointer;
+% ...
+% p:=@mem[a000:000];
+% \end{verbatim}
+cg_e_dont_call_exported_direct=06015_E_Fun‡äes 'EXPORT' declaradas nÆo podem ser chamadas
+% No longer in use.
+cg_w_member_cd_call_from_method=06016_W_Poss¡vel chamada ilegal de construtor ou destruidor
+% The compiler detected that a constructor or destructor is called within a
+% a method. This will probably lead to problems, since constructors / destructors
+% require parameters on entry.
+cg_n_inefficient_code=06017_N_C¢dio ineficiente
+% Your statement seems dubious to the compiler.
+cg_w_unreachable_code=06018_W_C¢digo inacess¡vel
+% You specified a construct which will never be executed. Example:
+% \begin{verbatim}
+% while false do
+%   begin
+%   {.. code ...}
+%   end;
+% \end{verbatim}
+cg_e_cant_call_abstract_method=06020_E_M‚todos abstratos nÆo podem ser chamados diretamente
+% You cannot call an abstract method directly. Instead, you must call an
+% overriding child method, because an abstract method isn't implemented.
+cg_d_register_weight=06027_DL_Registro $1 peso $2 $3
+% Debugging message. Shown when the compiler considers a variable for
+% keeping in the registers.
+cg_d_stackframe_omited=06029_DL_Quadro da pilha ‚ omitido
+% Some procedure/functions do not need a complete stack-frame, so it is omitted.
+% This message will be displayed when the {-vd} switch is used.
+cg_e_unable_inline_object_methods=06031_E_Objeto ou m‚todos classe nÆo podem ser 'em linha'.
+% You cannot have inlined object methods.
+cg_e_unable_inline_procvar=06032_E_Chamadas 'Procvar' nÆo podem ser 'em linha'.
+% A procedure with a procedural variable call cannot be inlined.
+cg_e_no_code_for_inline_stored=06033_E_Nenhum c¢digo para procedimento 'em linha' armazenado
+% The compiler couldn't store code for the inline procedure.
+cg_e_can_access_element_zero=06035_E_Elemento zero de uma 'ansi/wide-' ou stringlonga pode ser acessado, usar '(set)length'
+% You should use \var{setlength} to set the length of an ansi/wide/longstring
+% and \var{length} to get the length of such string type.
+cg_e_cannot_call_cons_dest_inside_with=06037_E_Construtores ou destruidores nÆo podem ser chamados de dentro de uma cl usula 'with'
+% Inside a \var{with} clause you cannot call a constructor or destructor for the
+% object you have in the \var{with} clause.
+cg_e_cannot_call_message_direct=06038_E_Imposs¡vel chamar m‚todos manipuladores de mensagem diretamente
+% A message method handler method cannot be called directly if it contains an
+% explicit \var{Self} argument.
+cg_e_goto_inout_of_exception_block=06039_E_Salto interno ou externo a um bloco de exce‡Æo
+% It is not allowed to jump in or outside of an exception block like \var{try..finally..end;}.
+% For example, the following code will produce this error:
+
+% \begin{verbatim}
+% label 1;
+%
+% ...
+%
+% try
+%    if not(final) then
+%      goto 1;   // this line will cause an error
+% finally
+%   ...
+% end;
+% 1:
+% ...
+% \end{verbatim}
+cg_e_control_flow_outside_finally=06040_E_Instru‡äes de controle de fluxo nÆo sÆo permitidos em um bloco 'finally'
+% It isn't allowed to use the control flow statements \var{break},
+% \var{continue} and \var{exit}
+% inside a finally statement. The following example shows the problem:
+% \begin{verbatim}
+% ...
+%   try
+%      p;
+%   finally
+%      ...
+%      exit;  // This exit ISN'T allowed
+%   end;
+% ...
+%
+% \end{verbatim}
+% If the procedure \var{p} raises an exception the finally block is
+% executed. If the execution reaches the exit, it's unclear what to do:
+% exit the procedure or search for another exception handler.
+cg_w_parasize_too_big=06041_W_Tamanho parƒmetros excede limite para certas CPU's
+% This indicates that you are declaring more than 64K of parameters, which
+% might not be supported on other processor targets.
+cg_w_localsize_too_big=06042_W_Tamanho vari vel local excede limite para certas CPU's
+% This indicates that you are declaring more than 32K of local variables, which
+% might not be supported on other processor targets.
+cg_e_localsize_too_big=06043_E_Tamanho vari veis locais excedem limites suportados
+% This indicates that you are declaring more than 32K of local variables, which
+% is not supported by this processor.
+cg_e_break_not_allowed=06044_E_BREAK nÆo permitido
+% You're trying to use \var{break} outside a loop construction.
+cg_e_continue_not_allowed=06045_E_CONTINUE nÆo permitido
+% You're trying to use \var{continue} outside a loop construction.
+cg_f_unknown_compilerproc=06046_F_'Compilerproc' desconhecido "$1". Verifique se vocˆ usa a biblioteca de tempo de execu‡Æo correta
+% The compiler expects that the runtime library contains certain subroutines. If you see this error
+% and you didn't change the runtime library code, it's very likely that the runtime library
+% you're using doesn't match the compiler in use. If you changed the runtime library this error means
+% that you removed a subroutine which the compiler needs for internal use.
+cg_f_unknown_system_type=06047_F_Imposs¡vel encontrar tipo sistema "$1". Verifique se vocˆ usa a biblioteca de tempo de execu‡Æo correta
+% The compiler expects that the runtime library contains certain type definitions. If you see this error
+% and you didn't change the runtime library code, it's very likely that the runtime library
+% you're using doesn't match the compiler in use. If you changed the runtime library this error means
+% that you removed a type which the compiler needs for internal use.
+cg_h_inherited_ignored=06048_H_Chamada herdada para m‚todo abstrato ignorada
+% This message appears only in Delphi mode when you call an abstract method
+% of a parent class via \var{inherited;}. The call is then ignored.
+cg_e_goto_label_not_found=06049_E_R¢tulo 'Goto' "$1" nÆo definido ou eliminado pela otimiza‡Æo
+% The label used in the goto definition is not defined or optimized away by the
+% unreachable code elemination.
+% \end{description}
+cg_f_unknown_type_in_unit=06050_F_Imposs¡vel encontrar o tipo "$1" na unidade "$2". Verifique se vocˆ usa a biblioteca de tempo de execu‡Æo correta.
+% The compiler expects that the runtime library contains certain type definitions. If you see this error
+% and you didn't change the runtime library code, it's very likely that the runtime library
+% you're using doesn't match the compiler in use. If you changed the runtime library this error means
+% that you removed a type which the compiler needs for internal use.
+# EndOfTeX
+
+#
+# Assembler reader
+#
+# 07109 is the last used one
+#
+asmr_d_start_reading=07000_DL_Iniciando $1 an lise estilo assembler
+% This informs you that an assembler block is being parsed
+asmr_d_finish_reading=07001_DL_Finalizada $1 an lise estilo assembler
+% This informs you that an assembler block has finished.
+asmr_e_none_label_contain_at=07002_E_PadrÆo nÆo-r¢tulo contˆm @
+% A identifier which isn't a label can't contain a @.
+asmr_e_building_record_offset=07004_E_Erro construindo deslocamento registro
+% There has an error occured while building the offset of a record/object
+% structure, this can happend when there is no field specified at all or
+% an unknown field identifier is used.
+asmr_e_offset_without_identifier=07005_E_'OFFSET' usado sem identificador
+% You can only use OFFSET with an identifier. Other syntaxes aren't
+% supported
+asmr_e_type_without_identifier=07006_E_'TYPE' usado sem identificador
+% You can only use TYPE with an identifier. Other syntaxes aren't
+% supported
+asmr_e_no_local_or_para_allowed=07007_E_Imposs¡vel usar vari vel local ou parƒmetro aqui
+% You can't use a local variable or parameter here, mostly because the
+% addressing of locals and parameters is done using the frame pointer register so the
+% address can't be obtained directly.
+asmr_e_need_offset=07008_E_Necess rio usar 'OFFSET' aqui
+% You need to use OFFSET <id> here to get the address of the identifier.
+asmr_e_need_dollar=07009_E_Necess rio usar $ aqui
+% You need to use $<id> here to get the address of the identifier.
+asmr_e_cant_have_multiple_relocatable_symbols=07010_E_Imposs¡vel usar m£ltiplos s¡mbolos reloc veis
+% You can't have more than one relocatable symbol (variable/typed constant)
+% in one argument.
+asmr_e_only_add_relocatable_symbol=07011_E_S¡mbolo reloc vel pode apenas ser adicionado
+% Relocatable symbols (variable/typed constant) can't be used with other
+% operators. Only addition is allowed.
+asmr_e_invalid_constant_expression=07012_E_ExpressÆo constante inv lida
+% There is an error in the constant expression.
+asmr_e_relocatable_symbol_not_allowed=07013_E_S¡mbolo reloc vel nÆo ‚ permitido
+% You can't use a relocatable symbol (variable/typed constant) here.
+asmr_e_invalid_reference_syntax=07014_E_Sintaxe referˆncia inv lida
+% There is an error in the reference.
+asmr_e_local_para_unreachable=07015_E_Vocˆ nÆo pode atingir $1 a partir desse c¢digo
+% You can not read directly the value of a local variable or parameter
+% of a higher level procedure in assembler code (except for
+% local assembler code without parameter nor locals).
+asmr_e_local_label_not_allowed_as_ref=07016_E_S¡mbolos locais/r¢tulos nÆo sÆo permitidos como referˆncias
+% You can't use local symbols/labels as references
+asmr_e_wrong_base_index=07017_E_Uso registro base e ¡ndice inv lido
+% There is an error with the base and index register, they are
+% probably incorrect
+asmr_w_possible_object_field_bug=07018_W_Poss¡vel erro na manipula‡Æo de campo de objeto
+% Fields of objects or classes can be reached directly in normal or objfpc
+% modes but TP and Delphi modes treat the field name as a simple offset.
+asmr_e_wrong_scale_factor=07019_E_Fator incorreto de escala especificado
+% The scale factor given is wrong, only 1,2,4 and 8 are allowed
+asmr_e_multiple_index=07020_E_Uso m£ltiplo registro ¡ndice
+% You are trying to use more than one index register
+asmr_e_invalid_operand_type=07021_E_Tipo operando inv lido
+% The operand type doesn't match with the opcode used
+asmr_e_invalid_string_as_opcode_operand=07022_E_'String' inv lido como operando 'opcode': $1
+% The string specified as operand is not correct with this opcode
+asmr_w_CODE_and_DATA_not_supported=07023_W_@CODE e @DATA nÆo suportados
+% @CODE and @DATA are unsupported and are ignored.
+asmr_e_null_label_ref_not_allowed=07024_E_Referˆncias nulas de r¢tulos nÆo sÆo permitidas
+asmr_e_expr_zero_divide=07025_E_DivisÆo por zero em avaliador asm
+% There is a division by zero in a constant expression
+asmr_e_expr_illegal=07026_E_Expressao ilegal
+% There is an illegal expression in a constant expression
+asmr_e_escape_seq_ignored=07027_E_Sequˆncia de escape ignorada: $1
+% There is a C-styled string, but the escape sequence in the string
+% is unknown, and is therefore ignored
+asmr_e_invalid_symbol_ref=07028_E_Referˆncia s¡mbolo inv lida
+asmr_w_fwait_emu_prob=07029_W_Fwait pode causar problemas de emula‡Æo com emu387
+asmr_w_fadd_to_faddp=07030_W_$1 sem operando traduzido em $1P
+asmr_w_enter_not_supported_by_linux=07031_W_Instru‡Æo 'ENTER' nÆo suportada pelo kernel Linux
+% ENTER instruction can generate a stack page fault that is not
+% caught correctly by the i386 Linux page handler.
+asmr_w_calling_overload_func=07032_W_Chamando uma fun‡Æo sobrecarregada em assembler
+% There is a call to an overloaded method in the assembler block,
+% this might be the sign there is a problem
+asmr_e_unsupported_symbol_type=07033_E_Tipo s¡mbolo nÆo suportado para operando
+asmr_e_constant_out_of_bounds=07034_E_Valor constante fora de faixa
+asmr_e_error_converting_decimal=07035_E_Erro convertendo decimal $1
+% A constant decimal value does not have the correct syntax
+asmr_e_error_converting_octal=07036_E_Erro convertendo octal $1
+% A constant octal value does not have the correct syntax
+asmr_e_error_converting_binary=07037_E_Erro convertendo bin rio $1
+% A constant binary value does not have the correct syntax
+asmr_e_error_converting_hexadecimal=07038_E_Erro convertendo hexadecimal $1
+% A constant hexadecimal value does not have the correct syntax
+asmr_h_direct_global_to_mangled=07039_H_$1 traduzido para $2
+asmr_w_direct_global_is_overloaded_func=07040_W_$1 est  associado a uma fun‡Æo sobrecarregada
+asmr_e_cannot_use_SELF_outside_a_method=07041_E_Imposs¡vel usar 'SELF' fora de um m‚todo
+% There is a reference to the \var{self} symbol while it is not
+% allowed. \var{self} can only be referenced inside methods
+asmr_e_cannot_use_OLDEBP_outside_nested_procedure=07042_E_Imposs¡vel usar 'OLDEBP' fora de um procedimento aninhado
+% There is a reference to the \var{oldebp} symbol while it is not
+% allowed. \var{oldebp} can only be referenced inside nested routines
+asmr_e_void_function=07043_W_Procedimentos nÆo podem retornar qualquer valor em c¢digo asm
+% Trying to return a value while in a procedure. A procedure
+% does not have any return value
+asmr_e_SEG_not_supported=07044_E_SEG nÆo suportado
+asmr_e_size_suffix_and_dest_dont_match=07045_E_Tamanho sufixo e tamanho destino ou fonte nÆo coincidem
+% The register size and the opcode size suffix don't match. This is
+% probably an error in the assembler statement
+asmr_w_size_suffix_and_dest_dont_match=07046_W_Tamanho sufixo e tamanho destino ou fonte nÆo coincidem
+% The register size and the opcode size suffix don't match. This is
+% probably an error in the assembler statement
+asmr_e_syntax_error=07047_E_Erro de sintaxe assembler
+% There is an assembler syntax error
+asmr_e_invalid_opcode_and_operand=07048_E_Combina‡Æo inv lida de 'opcode' e operandos
+% The opcode cannot be used with this type of operand
+asmr_e_syn_operand=07049_E_Erro de sintaxe assembler em operando
+asmr_e_syn_constant=07050_E_Erro de sintaxe assembler em constante
+asmr_e_invalid_string_expression=07051_E_ExpressÆo 'String' inv lida
+asmr_w_const32bit_for_address=07052_W_Constante com s¡mbolo $1 para endere‡o que nÆo est  em um ponteiro
+% A constant expression represents an address which does not fit
+% into a pointer. The address is probably incorrect
+asmr_e_unknown_opcode=07053_E_'Opcode' desconhecido $1
+% This opcode is not known
+asmr_e_invalid_or_missing_opcode=07054_E_'Opcode' inv lido ou faltando
+asmr_e_invalid_prefix_and_opcode=07055_E_Combina‡Æo inv lida de prefixo e 'opcode': $1
+asmr_e_invalid_override_and_opcode=07056_E_Combina‡Æo inv lida de 'override' e 'opcode': $1
+asmr_e_too_many_operands=07057_E_Muitos operandos na linha
+% There are too many operands for this opcode. Check your
+% assembler syntax
+asmr_w_near_ignored=07058_W_NEAR ignorado
+asmr_w_far_ignored=07059_W_FAR ignorado
+asmr_e_dup_local_sym=07060_E_S¡mbolo local duplicado $1
+asmr_e_unknown_local_sym=07061_E_S¡mbolo local indefinido $1
+asmr_e_unknown_label_identifier=07062_E_Identificador r¢tulo desconhecido $1
+asmr_e_invalid_register=07063_E_Nome registro inv lido
+% There is an unknown register name used as operand.
+asmr_e_invalid_fpu_register=07064_E_Nome registro ponto flutuante inv lido
+% There is an unknown register name used as operand.
+asmr_w_modulo_not_supported=07066_W_M¢dulo nÆo suportado
+asmr_e_invalid_float_const=07067_E_Constante ponto flutuante inv lida $1
+% The floating point constant declared in an assembler block is
+% invalid.
+asmr_e_invalid_float_expr=07068_E_ExpressÆo ponto flutuante inv lida
+% The floating point expression declared in an assembler block is
+% invalid.
+asmr_e_wrong_sym_type=07069_E_Tipo s¡mbolo incorreto
+asmr_e_cannot_index_relative_var=07070_E_Imposs¡vel indexar uma var. local ou parƒmetro com um registro
+% Trying to index using a base register a symbol which is already relative
+% to a register. This is not possible, and will probably lead to crashes.
+asmr_e_invalid_seg_override=07071_E_ExpressÆo sobreposi‡Æo segmento inv lida
+asmr_w_id_supposed_external=07072_W_Identificador $1 supostamente externo
+% There is a reference to an undefined symbol. This will not result
+% in an error, since the symbol might be external, but may cause
+% problems at link time if the symbol is not defined anywhere.
+asmr_e_string_not_allowed_as_const=07073_E_'Strings' nÆo permitidas como constantes
+% Character strings are not allowed as constants.
+asmr_e_no_var_type_specified=07074_Nenhum tipo de vari vel especificado
+% The syntax expects a type idenfitifer after the dot, but
+% none was found.
+asmr_w_assembler_code_not_returned_to_text=07075_E_C¢digo assembler nÆo retornou a se‡Æo texto
+% There was a directive in the assembler block to change sections,
+% but there is a missing return to the text section at the end
+% of the assembler block. This might cause errors during link time.
+asmr_e_not_directive_or_local_symbol=07076_E_NÆo ‚ uma diretiva ou s¡mbolo local $1
+% This symbol is unknown.
+asmr_w_using_defined_as_local=07077_E_Usando um nome definido como um r¢tulo local
+asmr_e_dollar_without_identifier=07078_E_Caracter D¢lar ‚ usado sem um identificador
+% A constant expression has an identifier which does not start with
+% the $ symbol.
+asmr_w_32bit_const_for_address=07079_W_Constante 32bit criada para endere‡o
+% A constant was used as an address. This is probably an error,
+% since using absolute addresses will probably not work.
+asmr_n_align_is_target_specific=07080_N_'.align' ‚ espec¡fico de alvo, use '.balign' ou '.p2align'
+% Using the .align directive is platform specific, and its meaning will vary
+% from one platform to another.
+asmr_e_cannot_access_field_directly_for_parameters=07081_E_Imposs¡vel acessar campos diretamente para parƒmetros
+% You should load the parameter first into a register and then access the
+% fields using that register.
+asmr_e_cannot_access_object_field_directly=07082_E_Imposs¡vel acessar campos de objetos/classes diretamente
+% You should load the self pointer first into a register and then access the
+% fields using the register as base. By default the self pointer is available
+% in the esi register on i386.
+asmr_e_unable_to_determine_reference_size=07083_E_Tamanho nÆo especificado e incapaz de determinar o tamanho dos operandos
+% You should specify explicitly a size for the reference, because
+% the compiler is unable to determine what size (byte,word,dword,etc.) it
+% should use for the reference.
+asmr_e_cannot_use_RESULT_here=07084_E_Imposs¡vel usar 'RESULT' nesta fun‡Æo
+% Some functions which return complex types cannot use the \var{result}
+% keyword.
+asmr_w_adding_explicit_args_fXX=07086_W_"$1" sem operando traduzido em "$1 %st,%st(1)"
+asmr_w_adding_explicit_first_arg_fXX=07087_W_"$1 %st(n)" traduzido em "$1 %st,%st(n)"
+asmr_w_adding_explicit_second_arg_fXX=07088_W_"$1 %st(n)" translated em "$1 %st(n),%st"
+asmr_e_invalid_char_smaller=07089_E_Caracter < nÆo permitido aqui
+% The shift operator requires the << characters. Only one
+% of those characters was found.
+asmr_e_invalid_char_greater=07090_E_Caracter > nÆo permitido aqui
+% The shift operator requires the >> characters. Only one
+% of those characters was found.
+asmr_w_align_not_supported=07093_W_ALIGN nÆo suportado
+asmr_e_no_inc_and_dec_together=07094_E_'Inc' e 'Dec' nÆo podem estar juntos
+% Trying to use an increment and a decrement within the same
+% opcode on the 680x0. This is impossible.
+asmr_e_invalid_reg_list_in_movem=07095_E_'Reglist' para 'movem' inv lido
+% Trying to use the \var{movem} opcode with invalid registers
+% to save or restore.
+asmr_e_invalid_reg_list_for_opcode=07096_E_'Reglist' inv lido para 'opcode'
+asmr_e_higher_cpu_mode_required=07097_E_Modo CPU maior requerido ($1)
+% Trying to use an instruction which is not supported in the current
+% cpu mode. Use a higher cpu generation to be able to use this
+% opcode in your assembler block
+asmr_w_unable_to_determine_reference_size_using_dword=07098_W_Nenhum tamanho especificado e incapaz de determinar o tamanho dos operandos, usando DWORD como padrÆo
+% You should specify explicitly a size for the reference, because
+% the compiler is unable to determine what size (byte,word,dword,etc.) it
+% should use for the reference. This warning is only used in Delphi mode where
+% it falls back to use DWORD as default.
+asmr_e_illegal_shifterop_syntax=07099_E_Erro de sintaxe tentando analisar um operando deslocamento
+% ARM only; ARM assembler supports a so called shifter operand. The used syntax isn't
+% a valid shifter operand. Example for an operation with shifter operand:
+% \begin{verbatim}
+% asm
+%   orr     r2,r2,r2,lsl #8
+% end;
+% \end{verbatim}
+asmr_e_packed_element=07100_E_Endere‡o de componente compactado nÆo est  no limite byte
+% Packed components (record fields and array elements) may start at an arbitrary
+% bit inside a byte. On CPU which do not support bit-addressable memory (which
+% includes all currently supported CPUs by FPC) you will therefore get an error
+% message when trying to index arrays with elements whose size is not a multiple
+% of 8 bits. The same goes for accessing record fields with such an address.
+% multiple of 8 bits.
+asmr_w_unable_to_determine_reference_size_using_byte=07101_W_Nenhum tamanho especificado e incapaz de determinar o tamanho dos operandos, usando BYTE como padrÆo
+% You should specify explicitly a size for the reference, because
+% the compiler is unable to determine what size (byte,word,dword,etc.) it
+% should use for the reference. This warning is only used in Delphi mode where
+% it falls back to use BYTE as default.
+asmr_w_no_direct_ebp_for_parameter=07102_W_Uso de '+offset(%ebp)' para parƒmetros inv lido aqui
+% Using direct 8(%ebp) reference for function/procedure parameters is invalid
+% if parameters are in registers.
+asmr_w_direct_ebp_for_parameter_regcall=07103_W_Uso de '+offset(%ebp)' nÆo ‚ compat¡vel com a conven‡Æo 'regcall'
+% Using direct 8(%ebp) reference for function/procedure parameters is invalid
+% if parameters are in registers.
+asmr_w_direct_ebp_neg_offset=07104_W_Uso de '-offset(%ebp)' nÆo ‚ recomendada para acesso a vari vel local
+% Using -8(%ebp) to access a local variable is not recommended
+asmr_w_direct_esp_neg_offset=07105_W_Uso de '-offset(%esp)', acesso pode causar travamento ou valor pode ser perdido
+% Using -8(%esp) to access a local stack is not recommended, as
+% this stack portion can be overwritten by any function calls or interrupts.
+asmr_e_no_vmtoffset_possible=07106_E_'VMTOffset' deve ser usado em combina‡Æo com um m‚todo virtual, e "$1" nÆo ‚ virtual
+% Only virtual methods have VMT offsets
+asmr_e_need_pic_ref=07107_E_Gerando PIC, mas referˆncia nÆo ‚ segura (PIC-safe)
+% The compiler has been configured to generate position-independent code
+% (PIC), but there are position-dependent references in the current
+% handwritten assembler instruction.
+asmr_e_mixing_regtypes=07108_E_Todos os registros em um conjunto de registros devem ser do mesmo tipo e largura
+% Instructions on the ARM architecture that take a register set as argument require that all registers
+% in this set are of the same kind (e.g., integer, vfp) and width (e.g., single precision, double precision).
+asmr_e_empty_regset=07109_E_Um conjunto de registros nÆo pode estar vazio
+% Instructions on the ARM architecture that take a register set as argument require that such a set
+% contains at least one register.
+#
+# Assembler/binary writers
+#
+# 08020 is the last used one
+#
+asmw_f_too_many_asm_files=08000_F_Muitos arquivos assembler
+% With smartlinking enabled, there are too many assembler
+% files generated. Disable smartlinking.
+asmw_f_assembler_output_not_supported=08001_F_Sa¡da assembler selecionada nÆo suportada
+asmw_f_comp_not_supported=08002_F_'Comp' nÆo suportado
+asmw_f_direct_not_supported=08003_F_Modo direto nÆo suportado por gravadores bin rios
+% Direct assembler mode is not supported for binary writers.
+asmw_e_alloc_data_only_in_bss=08004_E_Alocamento de dados somente permitida na se‡Æo 'bss'
+asmw_f_no_binary_writer_selected=08005_F_Nenhum gravador bin rio selecionado
+asmw_e_opcode_not_in_table=08006_E_Asm: Opcode $1 nÆo est  na tabela
+asmw_e_invalid_opcode_and_operands=08007_E_Asm: $1 combina‡Æo inv lida de 'opcode' e operandos
+asmw_e_16bit_not_supported=08008_E_Asm: referˆncias 16 Bits nÆo suportadas
+asmw_e_invalid_effective_address=08009_E_Asm: Endere‡o efetivo inv lido
+asmw_e_immediate_or_reference_expected=08010_E_Asm: Esperados 'Immediate' ou referˆncia
+asmw_e_value_exceeds_bounds=08011_E_Asm: $1 valor excede limites $2
+asmw_e_short_jmp_out_of_range=08012_E_Asm: Salto curto fora de faixa $1
+asmw_e_undefined_label=08013_E_Asm: R¢tulo indefinido $1
+asmw_e_comp_not_supported=08014_E_Asm: Tipo 'Comp' nÆo suportado por este alvo
+asmw_e_extended_not_supported=08015_E_Asm: Tipo extendido nÆo suportado por este alvo
+asmw_e_duplicate_label=08016_E_Asm: R¢tulo duplicado $1
+asmw_e_redefined_label=08017_E_Asm: R¢tulo redefinido $1
+asmw_e_first_defined_label=08018_E_Asm: Primeiramente definido aqui
+asmw_e_invalid_register=08019_E_Asm: Registro inv lido $1
+asmw_e_16bit_32bit_not_supported=08020_E_Asm: Referˆncias 16 ou 32 Bits nÆo suportadas
+asmw_e_64bit_not_supported=08021_E_Asm: Operandos 64 Bits nÆo suportados
+
+#
+# Executing linker/assembler
+#
+# 09032 is the last used one
+#
+# BeginOfTeX
+%
+% \section{Errors of assembling/linking stage}
+% This section lists errors that occur when the compiler is processing the
+% command line or handling the configuration files.
+% \begin{description}
+exec_w_source_os_redefined=09000_W_Sistema operacional fonte redefinido
+% The source operating system is redefined.
+exec_i_assembling_pipe=09001_I_Montando (pipe) $1
+% Assembling using a pipe to an external assembler.
+exec_d_cant_create_asmfile=09002_E_Imposs¡vel criar arquivo assembler: $1
+% The mentioned file can't be created. Check if you have
+% access permissions to create this file.
+exec_e_cant_create_objectfile=09003_E_Imposs¡vel criar arquivo objeto: $1
+% The mentioned file can't be created. Check if you have
+% got access permissions to create this file.
+exec_e_cant_create_archivefile=09004_E_Imposs¡vel criar arquivo: $1
+% The mentioned file can't be created. Check if you have
+% access permissions to create this file.
+exec_e_assembler_not_found=09005_E_Montador $1 nÆo encontrado, mudando para montador externo
+% The assembler program was not found. The compiler will produce a script that
+% can be used to assemble and link the program.
+exec_t_using_assembler=09006_T_Usando montador: $1
+% An informational message saying which assembler is being used.
+exec_e_error_while_assembling=09007_E_Erro ao montar c¢digo sa¡da $1
+% There was an error while assembling the file using an external assembler.
+% Consult the documentation of the assembler tool to find out more information
+% on this error.
+exec_e_cant_call_assembler=09008_E_Imposs¡vel chamar montador, erro $1 mudando para montador externo
+% An error occurred when calling an external assembler. The compiler will produce a script that
+% can be used to assemble and link the program.
+exec_i_assembling=09009_I_Montando $1
+% An informational message stating which file is being assembled.
+exec_i_assembling_smart=09010_I_Montando com vincula‡Æo inteligente $1
+% An informational message stating which file is being assembled using smartlinking.
+exec_w_objfile_not_found=09011_W_Objeto $1 nÆo encontrado, Vincula‡Æo pode falhar !
+% One of the object files is missing, and linking will probably fail.
+% Check your paths.
+exec_w_libfile_not_found=09012_W_Biblioteca $1 nÆo encontrada, Vincula‡Æo pode falhar !
+% One of the library files is missing, and linking will probably fail.
+% Check your paths.
+exec_e_error_while_linking=09013_E_Erro durante vincula‡Æo
+% Generic error while linking.
+exec_e_cant_call_linker=09014_E_Imposs¡vel chamar vinculador, mudando para vincula‡Æo externa
+% An error occurred when calling an external linker. The compiler will produce a script that
+% can be used to assemble and link the program.
+exec_i_linking=09015_I_Vinculando $1
+% An informational message, showing which program or library is being linked.
+exec_e_util_not_found=09016_E_Utilit rio $1 Æo encontrado, mudando para vincula‡Æo externa
+% An external tool was not found. The compiler will produce a script that
+% can be used to assemble and link or postprocess the program.
+exec_t_using_util=09017_T_Usando utilit rio $1
+% An informational message, showing which external program (usually a postprocessor) is being used.
+exec_e_exe_not_supported=09018_E_Cria‡Æo de Execut veis nÆo suportada
+% Creating executable programs is not supported for this platform, because it was
+% not yet implemented in the compiler.
+exec_e_dll_not_supported=09019_E_Cria‡Æo de bibliotecas Dinƒmicas/Compartilhadas nÆo suportada
+% Creating dynamically loadable libraries is not supported for this platform, because it was
+% not yet implemented in the compiler.
+exec_i_closing_script=09020_I_Fechando roteiro $1
+% Informational message showing when writing of the external assembling and linking script is finished.
+exec_e_res_not_found=09021_E_Compilador recursos "$1" nÆo encontrado, mudando para modo externo
+% An external resource compiler was not found. The compiler will produce a script that
+% can be used to assemble, compile resources and link or postprocess the program.
+exec_i_compilingresource=09022_I_Compilando recursos $1
+% An informational message, showing which resource is being compiled.
+exec_t_unit_not_static_linkable_switch_to_smart=09023_T_Unidade $1 nÆo pode ser vinculada estaticamente, mudando para vincula‡Æo inteligente
+% Static linking was requested, but a unit which is not statically linkable was used.
+exec_t_unit_not_smart_linkable_switch_to_static=09024_T_Unidade $1 nÆo pode ser vinculada inteligentemente, mudando para vincula‡Æo est tica
+% Smart linking was requested, but a unit which is not smart-linkable was used.
+exec_t_unit_not_shared_linkable_switch_to_static=09025_T_Unidade $1 nÆo pode ser vinculada compartilhadamente, mudando para vincula‡Æo est tica
+% Shared linking was requested, but a unit which is not shared-linkable was used.
+exec_e_unit_not_smart_or_static_linkable=09026_E_Unidade $1 nÆo pode ser vinculada inteligentemente ou estaticamente
+% Smart or static linking was requested, but a unit which cannot be used for either  was used.
+exec_e_unit_not_shared_or_static_linkable=09027_E_Unidade $1 nÆo pode ser vinculada compartilhadamente ou estaticamente
+% Shared or static linking was requested, but a unit which cannot be used for either  was used.
+exec_d_resbin_params=09028_D_Chamando compilador recursos "$1" com "$2" como linha comando
+% An informational message showing which command line is used for the resource compiler.
+exec_e_error_while_compiling_resources=09029_E_Erro ao compilar recursos
+% The resource compiler or converter returned an error.
+exec_e_cant_call_resource_compiler=09030_E_Imposs¡vel chamar o compilador recursos "$1", mudando para modo externo
+% An error occurred when calling a resource compiler. The compiler will produce
+% a script that can be used to assemble, compile resources and link or
+% postprocess the program.
+exec_e_cant_open_resource_file=09031_E_Imposs¡vel abrir arquivo recursos "$1"
+% An error occurred resource file can not be opened.
+exec_e_cant_write_resource_file=09032_E_Imposs¡vel gravar arquivo recursos "$1"
+% An error occurred resource file can not be written.
+%\end{description}
+# EndOfTeX
+
+#
+# Executable information
+#
+# 09134 is the last used one
+#
+# BeginOfTeX
+% \section{Executable information messages.}
+% This section lists all messages that the compiler emits when an executable program is produced,
+% and only when the internal linker is used.
+% \begin{description}
+execinfo_f_cant_process_executable=09128_F_Imposs¡vel p¢s-processar execut vel $1
+% Fatal error when the compiler is unable to post-process an executable.
+execinfo_f_cant_open_executable=09129_F_Imposs¡vel abrir execut vel $1
+% Fatal error when the compiler cannot open the file for the executable.
+execinfo_x_codesize=09130_X_Tamanho do C¢digo: $1 bytes
+% Informational message showing the size of the produced code section.
+execinfo_x_initdatasize=09131_X_Tamanho dos dados inicializados: $1 bytes
+% Informational message showing the size of the initialized data section.
+execinfo_x_uninitdatasize=09132_X_Tamanho dos dados nÆo inicializados: $1 bytes
+% Informational message showing the size of the uninitialized data section.
+execinfo_x_stackreserve=09133_X_Espa‡o da Pilha reservado: $1 bytes
+% Informational message showing the stack size that the compiler reserved for the executable.
+execinfo_x_stackcommit=09134_X_Espa‡o da Pilha comprometido: $1 bytes
+% Informational message showing the stack size that the compiler committed for the executable.
+%\end{description}
+# EndOfTeX
+
+#
+# Internal linker messages
+#
+# 09201 is the last used one
+#
+# BeginOfTeX
+% \section{Linker messages}
+% This section lists messages produced by internal linker.
+% \begin{description}
+link_f_executable_too_big=09200_F_Tamanho imagem execut vel ‚ muito grande para alvo $1.
+% Fatal error when resulting executable is too big.
+link_w_32bit_absolute_reloc=09201_W_Arquivo objeto "$1" contˆm reloca‡Æo absoluta de 32-bits para s¡mbolo "$2".
+% Warning when 64-bit object file contains 32-bit absolute relocations.
+% In such case an executable image can be loaded into lower 4Gb of
+% address space only.
+%\end{description}
+# EndOfTeX
+
+#
+# Unit loading
+#
+# 10061 is the last used one
+#
+# BeginOfTeX
+% \section{Unit loading messages.}
+% This section lists all messages that can occur when the compiler is
+% loading a unit from disk into memory. Many of these messages are
+% informational messages.
+% \begin{description}
+unit_t_unitsearch=10000_T_Busca Unidade: $1
+% When you use the \var{-vt} option, the compiler tells you where it tries to find
+% unit files.
+unit_t_ppu_loading=10001_T_Carregando PPU $1
+% When the \var{-vt} switch is used, the compiler tells you
+% what units it loads.
+unit_u_ppu_name=10002_U_Nome PPU: $1
+% When you use the \var{-vu} flag, the unit name is shown.
+unit_u_ppu_flags=10003_U_PPU 'Flags': $1
+% When you use the \var{-vu} flag, the unit flags are shown.
+unit_u_ppu_crc=10004_U_PPU 'Crc': $1
+% When you use the \var{-vu} flag, the unit CRC check is shown.
+unit_u_ppu_time=10005_U_Hora PPU: $1
+% When you use the \var{-vu} flag, the time the unit was compiled is shown.
+unit_u_ppu_file_too_short=10006_U_Arquivo PPU muito pequeno
+% The ppufile is too short, not all declarations are present.
+unit_u_ppu_invalid_header=10007_U_Cabe‡alho PPU inv lido (sem PPU no come‡o)
+% A unit file contains as the first three bytes the ASCII codes of the characters \var{PPU}.
+unit_u_ppu_invalid_version=10008_U_VersÆo PPU inv lida $1
+% This unit file was compiled with a different version of the compiler, and
+% cannot be read.
+unit_u_ppu_invalid_processor=10009_U_PPU foi compilado para outro processador
+% This unit file was compiled for a different processor type, and
+% cannot be read.
+unit_u_ppu_invalid_target=10010_U_PPU foi compilado para outro alvo
+% This unit file was compiled for a different target, and
+% cannot be read.
+unit_u_ppu_source=10011_U_Fonte PPU: $1
+% When you use the \var{-vu} flag, the unit source file name is shown.
+unit_u_ppu_write=10012_U_Gravando $1
+% When you specify the \var{-vu} switch, the compiler will tell you where it
+% writes the unit file.
+unit_f_ppu_cannot_write=10013_F_Imposs¡vel gravar arquivo PPU
+% An error occurred when writing the unit file.
+unit_f_ppu_read_error=10014_F_Erro ao ler arquivo PPU
+% This means that the unit file was corrupted, and contains invalid
+% information. Recompilation will be necessary.
+unit_f_ppu_read_unexpected_end=10015_F_Fim de arquivo PPU inesperado
+% Unexpected end of file. This may mean that the PPU file is
+% corrupted.
+unit_f_ppu_invalid_entry=10016_F_Entrada inv lida arquivo PPU: $1
+% The unit the compiler is trying to read is corrupted, or generated with a
+% newer version of the compiler.
+unit_f_ppu_dbx_count_problem=10017_F_Problema contagem Dbx PPU
+% There is an inconsistency in the debugging information of the unit.
+unit_e_illegal_unit_name=10018_E_Nome unidade ilegal: $1
+% The name of the unit does not match the file name.
+unit_f_too_much_units=10019_F_Muitas unidades
+% \fpc has a limit of 1024 units in a program. You can change this behavior
+% by changing the \var{maxunits} constant in the \file{fmodule.pas} file of the
+% compiler, and recompiling the compiler.
+unit_f_circular_unit_reference=10020_F_Referˆncia circular em unidade entre $1 e $2
+% Two units are using each other in the interface part. This is only allowed
+% in the \var{implementation} part. At least one unit must contain the other one
+% in the \var{implementation} section.
+unit_f_cant_compile_unit=10021_F_Imposs¡vel compilar unidade $1, nenhum fonte dispon¡vel
+% A unit was found that needs to be recompiled, but no sources are
+% available.
+unit_f_cant_find_ppu=10022_F_Imposs¡vel localizar unidade $1 usada por $2
+% You tried to use a unit of which the PPU file isn't found by the
+% compiler. Check your configuration file for the unit paths.
+unit_w_unit_name_error=10023_W_Unidade $1 nÆo foi encontrada mas $2 existe
+% This error message is no longer used.
+unit_f_unit_name_error=10024_F_Unidade $1 foi procurada mas $2 encontrada
+% \dos truncation of 8 letters for unit PPU files
+% may lead to problems when unit name is longer than 8 letters.
+unit_w_switch_us_missed=10025_W_Compilar a unidade 'system' requer a chave -Us
+% When recompiling the system unit (it needs special treatment), the
+% \var{-Us} switch must be specified.
+unit_f_errors_in_unit=10026_F_Houveram $1 erros ao compilar m¢dulo, parando
+% When the compiler encounters a fatal error or too many errors in a module
+% then it stops with this message.
+unit_u_load_unit=10027_U_Carregar de $1 ($2) unidade $3
+% When you use the \var{-vu} flag, which unit is loaded from which unit is
+% shown.
+unit_u_recompile_crc_change=10028_U_Recompilando $1, 'checksum' alterado para $2
+% The unit is recompiled because the checksum of a unit it depends on has
+% changed.
+unit_u_recompile_source_found_alone=10029_U_Recompilando $1, apenas fonte encontrado
+% When you use the \var{-vu} flag, these messages tell you why the current
+% unit is recompiled.
+unit_u_recompile_staticlib_is_older=10030_U_Recompilando unidade, bib est tica ‚ mais antiga que o arquivo ppu
+% When you use the \var{-vu} flag, the compiler warns if the static library
+% of the unit is older than the unit file itself.
+unit_u_recompile_sharedlib_is_older=10031_U_Recompilando unidade, bib compartilhada ‚ mais antiga que o arquivo ppu
+% When you use the \var{-vu} flag, the compiler warns if the shared library
+% of the unit is older than the unit file itself.
+unit_u_recompile_obj_and_asm_older=10032_U_Recompilando unidade, 'obj' e 'asm' sÆo mais antigos que o arquivo ppu
+% When you use the \var{-vu} flag, the compiler warns if the assembler or
+% object file of the unit is older than the unit file itself.
+unit_u_recompile_obj_older_than_asm=10033_U_Recompilando unidade, 'obj' ‚ mais antigo que 'asm'
+% When you use the \var{-vu} flag, the compiler warns if the assembler
+% file of the unit is older than the object file of the unit.
+unit_u_parsing_interface=10034_U_Analisando 'interface' de $1
+% When you use the \var{-vu} flag, the compiler warns that it starts
+% parsing the interface part of the unit.
+unit_u_parsing_implementation=10035_U_Analisando 'implementation' de $1
+% When you use the \var{-vu} flag, the compiler warns that it starts
+% parsing the implementation part of the unit.
+unit_u_second_load_unit=10036_U_Segundo carregamento para a unidade $1
+% When you use the \var{-vu} flag, the compiler warns that it starts
+% recompiling a unit for the second time. This can happen with
+% interdependent units.
+unit_u_check_time=10037_U_PPU Verifique arquivo $1 hora $2
+% When you use the \var{-vu} flag, the compiler shows the filename and
+% date and time of the file on which a recompile depends.
+### The following two error msgs is currently disabled.
+#unit_h_cond_not_set_in_last_compile=10038_H_Conditional $1 was not set at startup in last compilation of $2
+#% when recompilation of an unit is required the compiler will check that
+#% the same conditionals are set for the recompiliation. The compiler has
+#% found a conditional that currently is defined, but was not used the last
+#% time the unit was compiled.
+#unit_h_cond_set_in_last_compile=10039_H_Conditional $1 was set at startup in last compilation of $2
+#% when recompilation of an unit is required the compiler will check that
+#% the same conditionals are set for the recompiliation. The compiler has
+#% found a conditional that was used the last time the unit was compiled, but
+#% the conditional is currently not defined.
+unit_w_cant_compile_unit_with_changed_incfile=10040_W_Imposs¡vel recompilar unidade $1, mas encontrados arquivos de inclusÆo modificados
+% A unit was found to have modified include files, but
+% some source files were not found, so recompilation is impossible.
+unit_u_source_modified=10041_U_Arquivo $1 ‚ mais novo que o arquivo PPU $2
+% A modified source file for a compiler unit was found.
+unit_u_ppu_invalid_fpumode=10042_U_Tentando usar uma unidade que foi compilada com um modo diferente de FPU
+% Trying to compile code while using units which were not compiled with
+% the same floating point format mode. Either all code should be compiled
+% with FPU emulation on, or with FPU emulation off.
+unit_u_loading_interface_units=10043_U_Carregando unidades 'interface' de $1
+% When you use the \var{-vu} flag, the compiler warns that it is starting
+% to load the units defined in the interface part of the unit.
+unit_u_loading_implementation_units=10044_U_Carregando unidades 'implementation' de $1
+% When you use the \var{-vu} flag, the compiler warns that it is starting
+% to load the units defined in the implementation part of the unit.
+unit_u_interface_crc_changed=10045_U_Interface CRC alterado para a unidade $1
+% When you use the \var{-vu} flag, the compiler warns that the
+% CRC calculated for the interface has been changed after the implementation
+% has been parsed.
+unit_u_implementation_crc_changed=10046_U_Implementation CRC alterado para a unidade $1
+% When you use the \var{-vu} flag, the compiler warns that the
+% CRC calculated has been changed after the implementation
+% has been parsed.
+unit_u_finished_compiling=10047_U_Terminada a compila‡Æo da unidade $1
+% When you use the \var{-vu} flag, the compiler warns that it
+% has finished compiling the unit.
+unit_u_add_depend_to=10048_U_Adicionar dependˆncia de $1 para $2
+% When you use the \var{-vu} flag, the compiler warns that it
+% has added a dependency between the two units.
+unit_u_no_reload_is_caller=10049_U_Nenhum recarregamento, ‚ o chamador: $1
+% When you use the \var{-vu} flag, the compiler warns that it
+% will not reload the unit because it is the unit that wants
+% to load this unit.
+unit_u_no_reload_in_second_compile=10050_U_Nenhum recarregamento, j  em segunda compila‡Æo: $1
+% When you use the \var{-vu} flag, the compiler warns that it
+% will not reload the unit because it is already in a second recompile.
+unit_u_flag_for_reload=10051_U_'Flag' para recarregamento: $1
+% When you use the \var{-vu} flag, the compiler warns that it
+% has to reload the unit.
+unit_u_forced_reload=10052_U_Recarregamento for‡ado
+% When you use the \var{-vu} flag, the compiler warns that it
+% is reloading the unit because it was required.
+unit_u_previous_state=10053_U_Estado anterior de $1: $2
+% When you use the \var{-vu} flag, the compiler shows the
+% previous state of the unit.
+unit_u_second_compile_unit=10054_U_J  compilando $1, ajustando segunda compila‡Æo
+% When you use the \var{-vu} flag, the compiler warns that it is starting
+% to recompile a unit for the second time. This can happen with interdependent
+% units.
+unit_u_loading_unit=10055_U_Carregando unidade $1
+% When you use the \var{-vu} flag, the compiler warns that it starts
+% loading the unit.
+unit_u_finished_loading_unit=10056_U_Terminado carregamento unidade $1
+% When you use the \var{-vu} flag, the compiler warns that it finished
+% loading the unit.
+unit_u_registering_new_unit=10057_U_Registrando nova unidade $1
+% When you use the \var{-vu} flag, the compiler warns that it has
+% found a new unit and is registering it in the internal lists.
+unit_u_reresolving_unit=10058_U_Re-solucionando unidade $1
+% When you use the \var{-vu} flag, the compiler warns that it
+% has to recalculate the internal data of the unit.
+unit_u_skipping_reresolving_unit=10059_U_Pulando re-solu‡Æo unidade $1, ainda carregando unidades usadas
+% When you use the \var{-vu} flag, the compiler warns that it is
+% skipping the recalculation of the internal data of the unit
+% because there is no data to recalculate.
+unit_u_unload_resunit=10060_U_Descarregando unidade recursos $1 (nÆo necess ria)
+% When you use the \var{-vu} flag, the compiler warns that it is unloading the
+% resource handling unit, since no resources are used.
+unit_e_different_wpo_file=10061_E_Unidade $1 foi compilada usando uma entrada de retorno inteiramente diferente de otimiza‡Æo de programa ($2, $3); recompile-a sem 'wpo' ou use o mesmo arquivo de retorno de entrada 'wpo' para esta compila‡Æo
+% When a unit has been compiled using a particular whole program optimization (wpo) feedback file (\var{-FW<x>} \var{-OW<x>}),
+% this compiled version of the unit is specialised for that particular compilation scenario and cannot be used in
+% any other context. It has to be recompiled before you can use it in another program or with another wpo feedback input file.
+% \end{description}
+# EndOfTeX
+
+#
+#  Options
+#
+# 11047 is the last used one
+#
+option_usage=11000_O_$1 [options] <inputfile> [options]
+# BeginOfTeX
+%
+% \section{Command line handling errors}
+% This section lists errors that occur when the compiler is processing the
+% command line or handling the configuration files.
+% \begin{description}
+option_only_one_source_support=11001_W_Apenas uma arquivo fonte suportado, alterando arquivo fonte … compilar de "$1" para "$2"
+% You can specify only one source file on the command line. The last
+% one will be compiled, others will be ignored. This may indicate that
+% you forgot a \var{'-'} sign.
+option_def_only_for_os2=11002_W_Arquivo DEF pode ser criado apenas para OS/2
+% This option can only be specified when you're compiling for OS/2.
+option_no_nested_response_file=11003_E_Arquivos respostas aninhados nÆo sÆo suportados
+% You can not nest response files with the \var{@file} command line option.
+option_no_source_found=11004_F_Nenhm nome arquivo fonte na linha de comando
+% The compiler expects a source file name on the command line.
+option_no_option_found=11005_N_Nenhuma op‡Æo dentro do arquivo de configura‡äes $1
+% The compiler didn't find any option in that config file.
+option_illegal_para=11006_E_Parƒmetro ilegal: $1
+% You specified an unknown option.
+option_help_pages_para=11007_H_-? lista p ginas ajuda
+% When an unknown option is given, this message is diplayed.
+option_too_many_cfg_files=11008_F_Muitos arquivos de configura‡äes aninhados
+% You can only nest up to 16 config files.
+option_unable_open_file=11009_F_Incapaz de abrir arquivo $1
+% The option file cannot be found.
+option_reading_further_from=11010_D_Lendo demais op‡äes de $1
+% Displayed when you have notes turned on, and the compiler switches
+% to another options file.
+option_target_is_already_set=11011_W_Alvo j  est  ajustado para: $1
+% Displayed if more than one \var{-T} option is specified.
+option_no_shared_lib_under_dos=11012_W_Bibs compartilhadas nÆo sÆo suportadas pela plataforma DOS, revertendo para est tica
+% If you specify \var{-CD} for the \dos platform, this message is displayed.
+% The compiler supports only static libraries under \dos.
+option_too_many_ifdef=11013_F_No arquivo op‡äes $1 na linha $2 muitos \var{\#IF(N)DEFs} encontrados
+% The \var{\#IF(N)DEF} statements in the options file are not balanced with
+% the \var{\#ENDIF} statements.
+option_too_many_endif=11014_F_No arquivo op‡äes $1 na linha $2 encontrados \var{\#ENDIFs} inesperados
+% The \var{\#IF(N)DEF} statements in the options file are not balanced with
+% the \var{\#ENDIF} statements.
+option_too_less_endif=11015_F_Condicional aberta no final do arquivo de op‡äes
+% The \var{\#IF(N)DEF} statements in the options file are not balanced with
+% the \var{\#ENDIF} statements.
+option_no_debug_support=11016_W_Gera‡Æo de informa‡äes depura‡Æo nÆo ‚ suportada por este execut vel
+% It is possible to have a compiler executable that doesn't support
+% the generation of debugging info. If you use such an executable with the
+% \var{-g} switch, this warning will be displayed.
+option_no_debug_support_recompile_fpc=11017_H_Tente recompilar com -dGDB
+% It is possible to have a compiler executable that doesn't support
+% the generation of debugging info. If you use such an executable with the
+% \var{-g} switch, this warning will be displayed.
+option_obsolete_switch=11018_W_Vocˆ esta usando uma chave obsoleta $1
+% This warns you when you use a switch that is not needed/supported anymore.
+% It is recommended that you remove the switch to overcome problems in the
+% future, when the meaning of the switch may change.
+option_obsolete_switch_use_new=11019_W_Vocˆ esta usando uma chave obsoleta $1, favor usar $2
+% This warns you when you use a switch that is not supported anymore. You
+% must now use the second switch instead.
+% It is recommended that you change the switch to overcome problems in the
+% future, when the meaning of the switch may change.
+option_switch_bin_to_src_assembler=11020_N_Mudando montador assembler para o padrÆo escrita de fontes
+% This notifies you that the assembler has been changed because you used the
+% -a switch, which can't be used with a binary assembler writer.
+option_incompatible_asm=11021_W_Sa¡da Assembler selecionado "$1" incompat¡vel com "$2"
+option_asm_forced=11022_W_"$1" uso for‡ado montador assembler
+% The assembler output selected can not generate
+% object files with the correct format. Therefore, the
+% default assembler for this target is used instead.
+option_using_file=11026_T_Lendo op‡äes do arquivo $1
+% Options are also read from this file.
+option_using_env=11027_T_Lendo op‡äes do ambiente $1
+% Options are also read from this environment string.
+option_handling_option=11028_D_Manipulando op‡Æo "$1"
+% Debug info that an option is found and will be handled.
+option_help_press_enter=11029_O_*** pressione <enter> ***
+% Message shown when help is shown page per page. When pressing the ENTER
+% Key, the next page of help is shown. If you press q and then ENTER, the
+% compiler exits.
+option_start_reading_configfile=11030_H_In¡cio leitura do arquivo configura‡Æo $1
+% Start of configuration file parsing.
+option_end_reading_configfile=11031_H_Final leitura do arquivo configura‡Æo $1
+% End of configuration file parsing.
+option_interpreting_option=11032_D_Interpretando op‡Æo "$1"
+% The compiler is interpreting an option
+option_interpreting_firstpass_option=11036_D_Interpretando primeiro passo op‡Æo "$1"
+% The compiler is interpreting an option for the first time.
+option_interpreting_file_option=11033_D_Interpretando op‡Æo arquivo "$1"
+% The compiler is interpreting an option which it read from the configuration file.
+option_read_config_file=11034_D_Lendo arquivo configura‡Æo "$1"
+% The compiler is starting to read the configuration file.
+option_found_file=11035_D_Nome arquivo fonte encontrado "$1"
+% Additional information about options.
+% Displayed when you have the debug option turned on.
+option_code_page_not_available=11039_E_P gina de c¢digo desconhecida
+% An unknown code page for the source files was requested.
+% The compiler is compiled with support for several code pages built-in.
+% The requested code page is not in that list. You will need to recompile
+% the compiler with support for the codepage you need.
+option_config_is_dir=11040_F_Arquivo configura‡Æo $1 ‚ um diret¢rio
+% Directories cannot be used as configuration files.
+option_confict_asm_debug=11041_W_Sa¡da montador Assembler selecionado "$1" nÆo pode gerar informa‡äes depura‡Æo, depura‡Æo desabilitada
+% The selected assembler output cannot generate
+% debugging information, debugging option is therefore disabled.
+option_ppc386_deprecated=11042_W_Uso de 'ppc386.cfg' est  depreciado, favor usar 'fpc.cfg'
+% Using ppc386.cfg is still supported for historical reasons, however, for a multiplatform
+% system the naming makes no sense anymore. Please continue to use fpc.cfg instead.
+option_else_without_if=11043_F_No arquivo op‡äes $1 na linha $2 diretiva \var{\#ELSE} sem \var{\#IF(N)DEF} encontrada
+% An \var{\#ELSE} statement was found in the options file without a matching \var{\#IF(N)DEF} statement.
+option_unsupported_target=11044_F_Op‡Æo "$1" nÆo ‚, ou ainda nÆo ‚, suportada pela plataforma alvo atual
+% Not all options are supported or implemented for all target platforms. This message informs you that a chosen
+% option is incompatible with the currently selected target platform.
+option_unsupported_target_for_feature=11045_F_A caracter¡stica "$1" nÆo ‚, ou ainda nÆo ‚, suportada pela plataforma alvo selecionada
+% Not all features are supported or implemented for all target platforms. This message informs you that a chosen
+% feature is incompatible with the currently selected target platform.
+option_dwarf_smart_linking=11046_N_Informa‡Æo de depura‡Æo DWARF nÆo pode ser usada com vincula‡Æo inteligente neste alvo, mudando para vincula‡Æo est tica
+% Smart linking is currently incompatble with DWARF debug information on most
+% platforms, so smart linking is disabled in such cases.
+option_ignored_target=11047_W_Op‡Æo "$1" ignorada pela plataforma alvo atual
+% Not all options are supported or implemented for all target platforms. This message informs you that a chosen
+% option is ignored for the currently selected target platform.
+%\end{description}
+# EndOfTeX
+
+#
+#  Whole program optimization
+#
+# 12019 is the last used one
+#
+# BeginOfTeX
+%
+% \section{Whole program optimization messages}
+% This section lists errors that occur when the compiler is performing
+% whole program optimization.
+% \begin{description}
+wpo_cant_find_file=12000_F_Imposs¡vel abrir arquivo de retorno de otimiza‡Æo completa de programa "$1"
+% The compiler cannot open the specified feedback file with whole program optimization information.
+wpo_begin_processing=12001_D_Processando informa‡äes de otimiza‡Æo completa de programa no arquivo retorno 'wpo' "$1"
+% The compiler starts processing whole program optimization information found in the named file.
+wpo_end_processing=12002_D_Terminado processamento de otimiza‡Æo completea de programa no arquivo retorno 'wpo' "$1"
+% The compiler has finished processing the whole program optimization information found in the named file.
+wpo_expected_section=12003_E_Se‡Æo cabe‡alho esperada, mas obtido "$2" na linhae $1 do arquivo retorno 'wpo'
+% The compiler expected a section header in the whole program optimization file (starting with \%),
+% but did not find it.
+wpo_no_section_handler=12004_W_Nenhum manipulador registrado para se‡Æo otimiza‡Æo completa de programa "$2" na linha $1 do arquivo de retorno 'wpo', ignorando
+% The compiler has no handler to deal with the mentioned whole program optimization information
+% section, and will therefore ignore it and skip to the next section.
+wpo_found_section=12005_D_Encontrada se‡Æo otimiza‡Æo completa de programa "$1" com informa‡äes sobre "$2"
+% The compiler encountered a section with whole program optimization information, and according
+% to its handler this section contains information usable for the mentioned purpose.
+wpo_no_input_specified=12006_F_As otimiza‡äes completas de programa selecionadas requerem um arquivo de retorno previamente gerado (use -Fw para especificar)
+% The compiler needs information gathered during a previous compilation run to perform the selected
+% whole program optimizations. You can specify the location of the feedback file containing this
+% information using the -Fw switch.
+wpo_not_enough_info=12007_E_Nenhuma informa‡Æo coletada necess ria para realizar "$1" otimiza‡Æo completa programa foi encontrada
+% While you pointed the compiler to a file containing whole program optimization feedback, it
+% did not contain the information necessary to perform the selected optimizations. You most likely
+% have to recompile the program using the appropate -OWxxx switch.
+wpo_no_output_specified=12008_F_Especifique um arquivo de retorno de otimiza‡Æo completa programa para armazenar as informa‡äes geradas (usando -FW)
+% You have to specify the feedback file in which the compiler has to store the whole program optimization
+% feedback that is generated during the compilation run. This can be done using the -FW switch.
+wpo_output_without_info_gen=12009_E_NÆo gerando qualquer informa‡Æo otimiza‡Æo completa programa, assim mesmo um arquivo de retorno foi especificado (usando -FW)
+% The compiler was instructed to store whole program optimization feedback into a file specified using -FW,
+% but not to actually generated any whole program optimization feedback. The classes of to be
+% generated information can be speciied using -OWxxx.
+wpo_input_without_info_use=12010_E_NÆo realizando qualquer otimiza‡Æo completa programa, assim mesmo um arquivo de retorno foi especificado (usando -Fw)
+% The compiler was not instructed to perform any whole program optimizations (no -Owxxx parameters),
+% but nevertheless an input file with such feedback was specified (using -Fwyyy). Since this can
+% indicate that you forgot to specify an -Owxxx parameter, the compiler generates an error in this case.
+wpo_skipping_unnecessary_section=12011_D_Pulando se‡Æo otimiza‡Æo completa programa "$1", porque nÆo ‚ necess ria pelas otimiza‡äes solicitadas
+% The whole program optimization feedback file contains a section with information that is not
+% required by the selected whole program optimizations.
+wpo_duplicate_wpotype=12012_W_Sobrepondo informa‡äes previamente lidas para "$1" do arquivo entrada retorno usando informa‡äes na se‡Æo "$2"
+% The feedback file contains multiple sections that provide the same class of information (e.g.,
+% information about which virtual methods can be devirtualized). In this case, the information in last encountered
+% section is used. Turn on debugging output (-vd) to see which class of information is provided by each section.
+wpo_cannot_extract_live_symbol_info_strip=12013_E_Imposs¡vel extrair informa‡äes de vida de s¡mbolos do programa durante elimina‡Æo s¡mbolos, use -Xs-
+% Certain symbol liveness collectors extract the symbol information from the linked program. If the symbol information
+% is stripped (option -Xs), this is not possible.
+wpo_cannot_extract_live_symbol_info_no_link=12014_E_Imposs¡vel extrair informa‡äes de vida de s¡mbolos do programa quando nÆo vinculando
+% Certain symbol liveness collectors extract the symbol information from the linked program. If the program is not
+% linked by the compiler, this is not possible.
+wpo_cannot_find_symbol_progs=12015_F_Imposs¡vel encontrar "$1" ou "$2" para extrair informa‡äes de vida de s¡mbolos do programa vinculado
+% Certain symbol liveness collectors need a helper program to extract the symbol information from the linked program.
+% This helper program is normally 'nm', which is part of the GNU binutils.
+wpo_error_reading_symbol_file=12016_E_Erro durante leitura das informa‡äes de v¡da de s¡mbolos produzidas por "$1"
+% An error occurred during the reading of the symbol liveness file that was generated using the 'nm' or 'objdump' program. The reason
+% can be that it was shorter than expected, or that its format was not understood.
+wpo_error_executing_symbol_prog=12017_F_Erro executando "$1" (c¢digo sa¡da: $2) para extrair informa‡äes de s¡mbolos do programa vinculado
+% Certain symbol liveness collectors need a helper program to extract the symbol information from the linked program.
+% The helper program produced the reported error code when it was run on the linked program.
+wpo_symbol_live_info_needs_smart_linking=12018_E_Cole‡Æo de informa‡äes de vida de s¡mbolos pode ajudar apenas quando usando vincula‡Æo inteligente, use -CX -XX
+% Whether or not a symbol is live is determined by looking whether it exists in the final linked program.
+% Without smart linking/dead code stripping, all symbols are always included, regardless of whether they are
+% actually used or not. So in that case all symbols will be seen as live, which makes this optimization ineffective.
+wpo_cant_create_feedback_file=12019_E_Imposs¡vel criar arquivo retorno otimiza‡äes completas de programa especificado "$1"
+% The compiler is unable to create the file specified using the -FW parameter to store the whole program optimisation information.
+%\end{description}
+# EndOfTeX
+
+
+#
+# Logo (option -l)
+#
+option_logo=11023_[
+Compilador Free Pascal versÆo $FPCFULLVERSION [$FPCDATE] para $FPCCPU
+Copyright (c) 1993-2009 by Florian Klaempfl
+]
+
+#
+# Info (option -i)
+#
+option_info=11024_[
+Compilador Free Pascal versÆo $FPCVERSION
+
+Data Compilador    : $FPCDATE
+CPU Alvo Copilador : $FPCCPU
+
+Alvos suportados:
+  $OSTARGETS
+
+Conjunto de instru‡äes CPU suportados:
+  $INSTRUCTIONSETS
+
+Conjunto de instru‡äes FPU suportados:
+  $FPUINSTRUCTIONSETS
+
+Alvos ABI suportados:
+  $ABITARGETS
+
+Otimiza‡äes suportadas:
+  $OPTIMIZATIONS
+
+Otimiza‡äs Completas Programa suportadas:
+  Todas
+  $WPOPTIMIZATIONS
+
+Tipos Microcontroladores suportados:
+  $CONTROLLERTYPES
+
+Este programa ‚ oferecido sob a Licen‡a Geral P£blica GNU
+Para maiores informa‡äes leia COPYING.FPC
+
+Reportar falhas, sugestäes, etc. para:
+                 http://bugs.freepascal.org
+ou
+                 [email protected]
+]
+
+#
+# Help pages (option -? and -h)
+#
+# The first character on the line indicates who will display this
+# line, the current possibilities are :
+#    * = every target
+#    3 = 80x86 targets
+#    6 = 680x0 targets
+#    e = in extended debug mode only
+#    P = PowerPC targets
+#    S = Sparc targets
+#    V = Virtual machine targets
+# The second character also indicates who will display this line,
+# (if the above character was TRUE) the current possibilities are :
+#    * = everyone
+#    g = with GDB info supported by the compiler
+#    O = OS/2
+#    L = UNIX systems
+#  The third character represents the indentation level.
+#
+option_help_pages=11025_[
+**0*_Ponha + ap¢s uma chave de op‡Æo boleana para habilit -la, - para desabilit -la
+**1a_O compilador nÆo elimina o arquivo gerado do montador assembler
+**2al_Lista linhas do c¢digo fonte no arquivo assembler
+**2an_Lista informa‡äes n¢ no arquivo assembler
+*L2ap_Usa encadeadores (pipes) em vez de criar arquivos tempor rios assembler
+**2ar_Lista informa‡äes aloca‡Æo/libera‡Æo registros no arquivo assembler
+**2at_Lista informa‡äes tempor rias aloca‡Æo/libera‡Æo no arquivo assembler
+**1A<x>_Formato sa¡da:
+**2Adefault_Usa montador assembler padrÆo
+3*2Aas_Monta usando o GNU AS
+3*2Anasmcoff_Arquivo COFF (Go32v2) usando Nasm
+3*2Anasmelf_Arquivo ELF32 (Linux) usando Nasm
+3*2Anasmwin32_Arquivo objeto Win32 usando Nasm
+3*2Anasmwdosx_Arquivo objeto Win32/WDOSX usando Nasm
+3*2Awasm_Arquivo Obj usando Wasm (Watcom)
+3*2Anasmobj_Arquivo Obj usando Nasm
+3*2Amasm_Arquivo Obj usando Masm (Microsoft)
+3*2Atasm_Arquivo Obj usando Tasm (Borland)
+3*2Aelf_ELF (Linux) usando gravador interno
+3*2Acoff_COFF (Go32v2) usando gravador interno
+3*2Apecoff_PE-COFF (Win32) usando gravador interno
+4*2Aas_Monta usando o GNU AS
+6*2Aas_Arquivo Unix .o usando o GNU AS
+6*2Agas_Montador assembler GNU Motorola
+6*2Amit_Sintaxe MIT (antigo GAS)
+6*2Amot_Montador assembler Motorola padrÆo
+A*2Aas_Monta usando o GNU AS
+P*2Aas_Monta usando o GNU AS
+S*2Aas_Monta usando o GNU AS
+**1b_Gera informa‡äes navegador
+**2bl_Gera informa‡äes s¡mbolos locais
+**1B_Constr¢i todos os m¢dulos
+**1C<x>_Op‡äes gera‡Æo de c¢digo:
+**2Ca<x>_Seleciona ABI, veja fpc -i para poss¡veis valores
+**2Cb_Gera c¢digo 'big-endian'
+**2Cc<x>_Ajusta conven‡Æo de chamada para <x>
+**2CD_Cria tamb‚m biblioteca dinƒmica (nÆo suportado)
+**2Ce_Compila‡Æo com opcodes de ponto flutuante emulados
+**2Cf<x>_Seleciona conjunto de instru‡äes fpu a usar, veja fpc -i para poss¡veis valores
+**2CF<x>_PrecisÆo m¡nima constante ponto flutuante (padrÆo, 32, 64)
+**2Cg_Gera c¢digo PIC
+**2Ch<n>_<n> bytes heap (entre 1023 e 67107840)
+**2Ci_Verifica‡Æo E/S
+**2Cn_Omite est gio vincula‡Æo
+**2Co_Verifica transbordamento de opera‡äes inteiras
+**2CO_Verifica poss¡vel transbordamento de opera‡äes inteiras
+**2Cp<x>_Seleciona conjunto de instru‡äes, veja fpc -i para poss¡ves valores
+**2CP<x>=<y>_ Ajustes compacta‡Æo
+**3CPPACKSET=<y>_ <y> conjunto aloca‡Æo: 0, 1 ou DEFAULT ou NORMAL, 2, 4 e 8
+**2Cr_Verifica‡Æo de faixa
+**2CR_Verifica validade de chamada de m‚todo de objeto
+**2Cs<n>_Ajusta verifica‡Æo tamanho da Pilha para <n>
+**2Ct_Verifica‡Æo Pilha (apenas para testes, veja manual)
+**2CX_Cria tamb‚m biblioteca inteligentemente vinculada
+**1d<x>_Define o s¡mbolo <x>
+**1D_Gera um arquivo DEF
+**2Dd<x>_Ajusta descri‡Æo para <x>
+**2Dv<x>_Ajusta versÆo DLL para <x>
+*O2Dw_Aplica‡Æo PM
+**1e<x>_Ajusta caminho para execut vel
+**1E_Mesmo que -Cn
+**1fPIC_Mesmo que -Cg
+**1F<x>_Ajusta nomes de arquivo e caminhos:
+**2Fa<x>[,y]_(para um programa) carregar unidades <x> e [y] antes de analisar cl usula 'uses'
+**2Fc<x>_Ajusta entrada p gina de c¢digo para <x>
+**2FC<x>_Ajusta nome do compilador RC bin rio para <x>
+**2Fd_Disabilita o cache de diret¢rios interno do compilador
+**2FD<x>_Ajusta o diret¢rio onde procurar por utilit rios para o compilador
+**2Fe<x>_Redireciona sa¡da erros para <x>
+**2Ff<x>_Adiciona <x> ao caminho framework (apenas Darwin)
+**2FE<x>_Ajusta caminho sa¡da exe/unidade para <x>
+**2Fi<x>_Adiciona <x> ao caminho inclusäes
+**2Fl<x>_Adiciona <x> ao caminho bibliotecas
+**2FL<x>_Use <x> como vinculador dinƒmico
+**2Fm<x>_Carrega tabela conversÆo unicode de <x>.txt no dir. do compilador
+**2Fo<x>_Adiciona <x> ao caminho objetos
+**2Fr<x>_Carrega o arquivo mensagens erro <x>
+**2FR<x>_Ajusta vinculador recursos (.res) para <x>
+**2Fu<x>_Adiciona <x> ao caminho unidades
+**2FU<x>_Ajusta caminho sa¡da unidade para <x>, sobrepäe -FE
+**2FW<x>_Armazena retorno otimiza‡Æo completa programa gerada em <x>
+**2Fw<x>_Carrega retorno otimiza‡Æo completa programa previamente armazenada de <x>
+*g1g_Gerar informa‡äes depura‡Æo (formato padrÆo para o alvo)
+*g2gc_Gerar verifica‡äes para ponteiros
+*g2gh_Usa unidade heaptrace (para depura‡Æo vazamentos/corrup‡Æo mem¢ria)
+*g2gl_Usa unidade informa‡äes linha (mostra mais info. com backtraces)
+*g2go<x>_Ajusta op‡äes informa‡äes depura‡Æo
+*g3godwarfsets_ Habilita 'conjunto' info. depura‡Æo DWARF (falhas gdb < 6.5)
+*g3gostabsabsincludes_ Armazena caminhos absolutos/completos arquivos inclusäes em 'Stabs'
+*g3godwarfmethodclassprefix_ Prefixa nomes m‚todos com nome classe em DWARF
+*g2gp_Preserva caixa nomes s¡mbolos em 'stabs'
+*g2gs_Gera informa‡äes depura‡Æo 'Stabs'
+*g2gt_Inutiliza vari veis locais (para detetar utiliza‡Æo de nÆo-inicilizadas)
+*g2gv_Gera programas rastre veis com 'Valgrind'
+*g2gw_Gera informa‡äes depura‡Æo DWARFv2 (mesmo que -gw2)
+*g2gw2_Gera informa‡äes depura‡Æo DWARFv2
+*g2gw3_Gera informa‡äes depura‡Æo DWARFv3
+**1i_Informa‡äes
+**2iD_Retorna data compilador
+**2iV_Retorna versÆo compilador curta
+**2iW_Retorna versÆo compilador completa
+**2iSO_Retorna SO compilador
+**2iSP_Retorna processador servidor compilador
+**2iTO_Retorna SO alvo
+**2iTP_Retorna processador alvo
+**1I<x>_Adiciona <x> ao caminho inclusäes
+**1k<x>_Passa <x> ao vinculador
+**1l_Grava logo
+**1M<x>_Ajusta modo linguagem para <x>
+**2Mfpc_Dialeto Free Pascal (padrÆo)
+**2Mobjfpc_Modo FPC com suporte ao Object Pascal
+**2Mdelphi_Modo compatibilidade Delphi 7
+**2Mtp_Modo compatibilidade TP/BP 7.0
+**2Mmacpas_Modo compatibilidade dialetos Macintosh Pascal
+**1n_NÆo ler os arquivos de configura‡äes padrÆo
+**1N<x>_Otimiza‡äes n¢s  rvore
+**2Nu_Desdobra la‡os
+**1o<x>_Altera o nome do execut vel produzido para <x>
+**1O<x>_Otimiza‡äes:
+**2O-_Disabilita otimiza‡äes
+**2O1_N¡vel 1 otimiza‡äes (r pida e amig vel depurador)
+**2O2_N¡vel 2 otimiza‡äes (-O1 + otimiza‡äes r pidas)
+**2O3_N¡vel 3 otimiza‡äes (-O2 + otimiza‡äes lentas)
+**2Oa<x>=<y>_Ajusta alinhamento
+**2Oo[NO]<x>_Habilita ou desabilita otimiza‡äes, veja fpc -i para poss¡veis valores
+**2Op<x>_Ajusta cpu alvo para otimiza‡äes, veja fpc -i para poss¡veis valores
+**2OW<x>_Gera retorno otimiza‡Æo completa programa para otimiza‡äes <x>, veja fpc -i para poss¡veis valores
+**2Ow<x>_Realiza otimiza‡Æo completa programa <x>, veja fpc -i para poss¡veis valores
+**2Os_Otimiza tamanho ao inv‚s de velocidade
+**1pg_Gera perfil c¢digo para 'gprof' (define FPC_PROFILE)
+**1R<x>_Estilo leitura Assembler:
+**2Rdefault_Use assembler padrÆo para alvo
+3*2Ratt_Leia assembler estilo AT&T
+3*2Rintel_Leia assembler estilo Intel
+6*2RMOT_Leia assembler estilo motorola
+**1S<x>_Op‡äes sintaxe:
+**2S2_Mesmo que -Mobjfpc
+**2Sc_Suporte operadores similares C (*=,+=,/= and -=)
+**2Sa_Liga afirma‡äes (assertions)
+**2Sd_Mesmo que -Mdelphi
+**2Se<x>_Op‡äes erros. <x> ‚ uma combina‡Æo do seguinte:
+**3*_<n> : Compilador para depois de <n> erros (padrÆo ‚ 1)
+**3*_w : Compilador tamb‚m para ap¢s avisos
+**3*_n : Compilador tamb‚m para ap¢s notas
+**3*_h : Compilador tamb‚m para ap¢s dicas
+**2Sg_Habilita LABEL e GOTO (padrÆo em -Mtp e -Mdelphi)
+**2Sh_Use 'ansistrings' por padrÆo ao inv‚s de 'shortstrings'
+**2Si_Liga 'inlining' de procedimentos/fun‡äes declaradas como "em-linha" (inline)
+**2Sk_Carrega unidade 'fpcylix'
+**2SI<x>_Ajusta estilo interface para <x>
+**3SIcom_COM interface compat¡vel (padrÆo)
+**3SIcorba_CORBA interface compat¡vel
+**2Sm_Suporta macros semelhantes C (global)
+**2So_Mesmo que -Mtp
+**2Ss_Nome construtor deve ser 'init' (destruidor deve ser 'done')
+**2St_Permite palavras-chave est ticas em objetos
+**2Sx_Habilita palavras-chave exce‡äes (padrÆo nos modos Delphi/ObjFPC)
+**1s_NÆo chama o montador assembler e o vinculador
+**2sh_Gera roteiro para vincular no servidor
+**2st_Gera roteiro para vincular no alvo
+**2sr_Pula fase aloca‡Æo registro (use com -alr)
+**1T<x>_Sistema operacional alvo:
+3*2Temx_OS/2 via EMX (incluidos extensor EMX/RSX)
+3*2Tfreebsd_FreeBSD
+3*2Tgo32v2_VersÆo 2 do extensor DOS DJ Delorie
+3*2Tlinux_Linux
+3*2Tnetbsd_NetBSD
+3*2Tnetware_M¢dulo Novell Netware (clib)
+3*2Tnetwlibc_M¢dulo Novell Netware (libc)
+3*2Topenbsd_OpenBSD
+3*2Tos2_OS/2 / eComStation
+3*2Tsunos_SunOS/Solaris
+3*2Tsymbian_Symbian OS
+3*2Twatcom_Extensor DOS compat¡vel Watcom
+3*2Twdosx_Extensor DOS WDOSX
+3*2Twin32_Windows 32 Bit
+3*2Twince_Windows CE
+4*2Tlinux_Linux
+6*2Tamiga_Commodore Amiga
+6*2Tatari_Atari ST/STe/TT
+6*2Tlinux_Linux/m68k
+6*2Tmacos_Macintosh m68k (nÆo suportado)
+6*2Tpalmos_PalmOS
+A*2Tlinux_Linux
+A*2Twince_Windows CE
+P*2Tamiga_AmigaOS no PowerPC
+P*2Tdarwin_Darwin e Mac OS X no PowerPC
+P*2Tlinux_Linux no PowerPC
+P*2Tmacos_Mac OS (cl ssico) no PowerPC
+P*2Tmorphos_MorphOS
+S*2Tlinux_Linux
+**1u<x>_Indefine o s¡mbolo <x>
+**1U_Op‡äes unidades:
+**2Un_NÆo verifica onde o nome unidade coincide com o nome arquivo
+**2Ur_Gera arquivos lan‡amento unidades (nunca automaticamente recompilado)
+**2Us_Compilar uma unidade sistema
+**1v<x>_Ser detalhado. <x> ‚ uma combina‡Æo das seguintes letras:
+**2*_e : Mostra erros (padrÆo)       0 : Nada mostra (exceto erros)
+**2*_w : Mostra avisos               u : Mostra info. unidade
+**2*_n : Mostra notas                t : Mostra arquivos tentados/usados
+**2*_h : Mostra dicas                c : Mostra condicionais
+**2*_i : Mostra info. geral          d : Mostra info. depura‡Æo
+**2*_l : Mostra n£meros linhas       r : Modo compatibilidade Rhide/GCC
+**2*_s : Mostra Data/Hora            q : Mostra n£meros mensagens
+**2*_a : Mostra tudo                 x : Info. execut vel (apenas Win32)
+**2*_b : Grava mensagens nome arqs.  p : Grava tree.log com  rvore an lise
+**2*_    com caminho completo        v : Grava fpcdebug.txt com muitas
+**2*_                                    informa‡äes de depura‡Æo
+**2*_m<x>,<y> : NÆo mostra mensagens numeradas <x> e <y>
+3*1W<x>_Op‡äes espec¡ficas alvo (alvos)
+A*1W<x>_Op‡äes espec¡ficas alvo (alvos)
+P*1W<x>_Op‡äes espec¡ficas alvo (alvos)
+p*1W<x>_Op‡äes espec¡ficas alvo (alvos)
+3*2Wb_Cria um encarte ao inv‚s de uma biblioteca (Darwin)
+P*2Wb_Cria um encarte ao inv‚s de uma biblioteca (Darwin)
+p*2Wb_Cria um encarte ao inv‚s de uma biblioteca (Darwin)
+3*2WB_Cria uma imagem reloc vel (Windows)
+A*2WB_Cria uma imagem reloc vel (Windows, Symbian)
+3*2WC_Especifica tipo aplica‡Æo console (EMX, OS/2, Windows)
+A*2WC_Especifica tipo aplica‡Æo console (Windows)
+P*2WC_Especifica tipo aplica‡Æo console (Classic Mac OS)
+3*2WD_Use DEFFILE para exportar fun‡äes de DLL ou EXE (Windows)
+A*2WD_Use DEFFILE para exportar fun‡äes de DLL ou EXE (Windows)
+3*2We_Use recursos externos (Darwin)
+P*2We_Use recursos externos (Darwin)
+p*2We_Use recursos externos (Darwin)
+3*2WF_Especifica tipo aplica‡Æo tela-cheia (EMX, OS/2)
+3*2WG_Especifica tipo aplica‡Æo gr fica (EMX, OS/2, Windows)
+A*2WG_Especifica tipo aplica‡Æo gr fica (Windows)
+P*2WG_Especifica tipo aplica‡Æo gr fica (Mac OS Cl ssico)
+3*2Wi_Use recursos internos (Darwin)
+P*2Wi_Use recursos internos (Darwin)
+p*2Wi_Use recursos internos (Darwin)
+3*2WN_NÆo gera c¢digo reloca‡Æo, necess rio para depura‡Æo (Windows)
+A*2WN_NÆo gera c¢digo reloca‡Æo, necess rio para depura‡Æo (Windows)
+3*2WR_Gera c¢digo reloca‡Æo (Windows)
+A*2WR_Gera c¢digo reloca‡Æo (Windows)
+P*2WT_Especifica tipo aplica‡Æo ferramenta MPW (Mac OS Cl ssico)
+3*2WX_Habilita pilha execut vel (Linux)
+A*2WX_Habilita pilha execut vel (Linux)
+p*2WX_Habilita pilha execut vel (Linux)
+P*2WX_Habilita pilha execut vel (Linux)
+**1X_Op‡äes execut vel:
+**2Xc_Passa '--shared/-dynamic' para o vinculador (BeOS, Darwin, FreeBSD, Linux)
+**2Xd_NÆo usa caminho busca biblioteca padrÆo (necess rio para compila‡Æo 'cross')
+**2Xe_Use vinculador externo
+**2Xg_Cria info.depura‡Æo em um arquivo separado e adiciona uma se‡Æo 'debuglink' no execut vel
+**2XD_Tenta vincular unidades dinƒmicamente (define FPC_LINK_DYNAMIC)
+**2Xi_Use vinculador interno
+**2Xm_Gera mapa vincula‡Æo
+**2XM<x>_Ajusta o nome da rotina 'principal' programa (padrÆo ‚ 'main')
+**2XP<x>_Prefixa os nomes dos utilit rios bin rios (binutils) com o prfixo <x>
+**2Xr<x>_Ajusta o caminho-rlink do vinculador para <x> (necess rio para compila‡Æo 'cross', veja o manual do 'ld' para mais informa‡äes) (BeOS, Linux)
+**2XR<x>_Prefixa <x> para todos caminhos busca vinculador (BeOS, Darwin, FreeBSD, Linux, Mac OS, Solaris)
+**2Xs_Elimina todos os s¡mbolos do execut vel
+**2XS_Tenta vincular unidades estaticamente (padrÆo, define FPC_LINK_STATIC)
+**2Xt_Vincula com bibliotecas est ticas (-static ‚ passado ao vinculador)
+**2XX_Tenta vincula‡Æo inteligente unidades (define FPC_LINK_SMART)
+**1*_
+**1?_Mostra esta ajuda
+**1h_Mostra esta ajuda sem pausa
+]
+
+#
+# The End...

compiler/msg/errorptd.msg

@@ -1,2484 +0,0 @@
-#
-#   This file is part of the Free Pascal Compiler
-#   Copyright (c) 1999-2008 by the Free Pascal Development team
-#
-#   Portuguese (DOS encoding) language file for Free Pascal Compiler
-#   Contributed by Ari Ricardo Ody <ari.ody at japinfo.com.br>
-#   Based on errore.msg of SVN revision 3935
-#
-#   See the file COPYING.FPC, included in this distribution,
-#   for details about the copyright.
-#
-#   This program is distributed in the hope that it will be useful,
-#   but WITHOUT ANY WARRANTY; without even the implied warranty of
-#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-#
-#
-# The constants are build in the following order:
-# <part>_<type>_<txtidentifier>
-#
-# <part> is the part of the compiler the message is used
-#   asmr_     assembler parsing
-#   asmw_     assembler writing/binary writers
-
-#   unit_     unit handling
-#   scan_     scanner
-#   parser_   parser
-#   type_     type checking
-#   general_  general info
-#   exec_     calls to assembler, linker, binder
-#
-# <type> the type of the message it should normally used for
-#   f_   fatal error
-#   e_   error
-#   w_   warning
-#   n_   note
-#   h_   hint
-#   i_   info
-#   l_   add linenumber
-#   u_   used
-#   t_   tried
-#   c_   conditional
-#   d_   debug message
-#   x_   executable informations
-#
-
-#
-# General
-#
-#
-# 01023 is the last used one
-#
-general_text_bytes_code=01019_bytes de codigo
-general_text_bytes_data=01020_bytes de dados
-# BeginOfTeX
-% \section{General compiler messages}
-% This section gives the compiler messages which are not fatal, but which
-% display useful information. The number of such messages can be
-% controlled with the various verbosity level \var{-v} switches.
-% \begin{description}
-general_t_compilername=01000_T_Compilador usado: $1
-% When the \var{-vt} switch is used, this line tells you what compiler
-% is used.
-general_d_sourceos=01001_D_Sist.Op. da compilacao: $1
-% When the \var{-vd} switch is used, this line tells you what the source
-% operating system is.
-general_i_targetos=01002_I_Sist.Op. de execucao: $1
-% When the \var{-vd} switch is used, this line tells you what the target
-% operating system is.
-general_t_exepath=01003_T_Caminho para os executaveis: $1
-% When the \var{-vt} switch is used, this line tells you where the compiler
-% looks for its binaries.
-general_t_unitpath=01004_T_Caminho para as units: $1
-% When the \var{-vt} switch is used, this line tells you where the compiler
-% looks for compiled units. You can set this path with the \var{-Fu}
-general_t_includepath=01005_T_Caminho para os includes: $1
-% When the \var{-vt} switch is used, this line tells you where the compiler
-% looks for its include files (files used in \var{\{\$I xxx\}} statements).
-% You can set this path with the \var{-I} option.
-general_t_librarypath=01006_T_Caminho para as libraries: $1
-% When the \var{-vt} switch is used, this line tells you where the compiler
-% looks for the libraries. You can set this path with the \var{-Fl} option.
-general_t_objectpath=01007_T_Caminho para modulos objeto: $1
-% When the \var{-vt} switch is used, this line tells you where the compiler
-% looks for object files you link in (files used in \var{\{\$L xxx\}} statements).
-% You can set this path with the \var{-Fo} option.
-general_i_abslines_compiled=01008_I_$1 Linhas compiladas, $2 seg$3
-% When the \var{-vi} switch is used, the compiler reports the number
-% of lines compiled, and the time it took to compile them (real time,
-% not program time).
-general_f_no_memory_left=01009_F_Memoria insuficiente para esta compilacao
-% The compiler doesn't have enough memory to compile your program. There are
-% several remedies for this:
-% \begin{itemize}
-% \item If you're using the build option of the compiler, try compiling the
-% different units manually.
-% \item If you're compiling a huge program, split it up in units, and compile
-% these separately.
-% \item If the previous two don't work, recompile the compiler with a bigger
-% heap (you can use the \var{-Ch} option for this, \seeo{Ch})
-% \end{itemize}
-general_i_writingresourcefile=01010_I_Gravando arquivo com os Resource strings: $1
-% This message is shown when the compiler writes the Resource String Table
-% file containing all the resource strings for a program.
-general_e_errorwritingresourcefile=01011_E_Gravando arquivo com os Resource strings: $1
-% This message is shown when the compiler encountered an error when writing
-% the Resource String Table file
-general_i_fatal=01012_I_Erro fatal:
-% Prefix for Fatal Errors
-general_i_error=01013_I_Erro:
-% Prefix for Errors
-general_i_warning=01014_I_Aviso:
-% Prefix for Warnings
-general_i_note=01015_I_Nota:
-% Prefix for Notes
-general_i_hint=01016_I_Sugestao:
-% Prefix for Hints
-general_e_path_does_not_exist=01017_E_Caminho "$1" nao existe
-% The specified path does not exist.
-general_f_compilation_aborted=01018_F_Compilacao abortada
-% Compilation was aborted.
-general_i_number_of_warnings=01021_I_Ocorreram $1 warning(s)
-% Total number of warnings issued during compilation.
-general_i_number_of_hints=01022_I_Feitas $1 sugestoes
-% Total number of hints issued during compilation.
-general_i_number_of_notes=01023_I_Feitos $1 comentarios 
-% Total number of notes issued during compilation.
-% \end{description}
-#
-# Scanner
-#
-# 02063 is the last used one
-#
-% \section{Scanner messages.}
-% This section lists the messages that the scanner emits. The scanner takes
-% care of the lexical structure of the pascal file, i.e. it tries to find
-% reserved words, strings, etc. It also takes care of directives and
-% conditional compiling handling.
-% \begin{description}
-scan_f_end_of_file=02000_F_Fim inesperado de arquivo
-% this typically happens in one of the following cases :
-% \begin{itemize}
-% \item The source file ends before the final \var{end.} statement. This
-% happens mostly when the \var{begin} and \var{end} statements aren't
-% balanced;
-% \item An include file ends in the middle of a statement.
-% \item A comment was not closed
-% \end{itemize}
-scan_f_string_exceeds_line=02001_F_String nao fechado na mesma linha
-% There is a missing closing ' in a string, so it occupies
-% multiple lines.
-scan_f_illegal_char=02002_F_caracter invalido "$1" ($2)
-% An illegal character was encountered in the input file.
-scan_f_syn_expected=02003_F_Erro de sintaxe "$1" esperado mas "$2" encontrado
-% This indicates that the compiler expected a different token than
-% the one you typed. It can occur almost everywhere where you make a
-% mistake against the pascal language.
-scan_t_start_include_file=02004_TL_Comecou a ler include file $1
-% When you provide the \var{-vt} switch, the compiler tells you
-% when it starts reading an included file.
-scan_w_comment_level=02005_W_Encontrado comentario de nivel $1
-% When the \var{-vw} switch is used, then the compiler warns you if
-% it finds nested comments. Nested comments are not allowed in Turbo Pascal
-% and can be a possible source of errors.
-scan_n_ignored_switch=02008_N_Ignorada diretiva "$1" do compilador
-% With \var{-vn} on, the compiler warns if it ignores a switch
-scan_w_illegal_switch=02009_W_Diretiva de compilador invalida "$1"
-% You included a compiler switch (i.e. \var{\{\$... \}}) which the compiler
-% does not recognise
-scan_w_switch_is_global=02010_W_Diretiva global do compilador em local invalido
-% The compiler switch is misplaced, and should be located at
-% the start of the unit or program.
-scan_e_illegal_char_const=02011_E_Constante caracter invalida
-% This happens when you specify a character with its ASCII code, as in
-% \var{\#96}, but the number is either illegal, or out of range.
-scan_f_cannot_open_input=02012_F_Arquivo "$1" nao encontrado
-% \fpc cannot find the program or unit source file you specified on the
-% command line.
-scan_f_cannot_open_includefile=02013_F_Includefile "$1" nao encontrado
-% \fpc cannot find the source file you specified in a \var{\{\$include ..\}}
-% statement.
-scan_e_illegal_pack_records=02015_E_Especificador de alinhamento de registro invalido "$1"
-% You are specifying the \var{\{\$PACKRECORDS n\} } or \var{\{\$ALIGN n\} }
-% with an illegal value for \var{n}. For \$PACKRECORDS valid alignments are 1, 2, 4, 8, 16, 32, C,
-% NORMAL, DEFAULT, and for \$ALIGN valid alignment are 1, 2, 4, 8, 16, 32, ON,
-% OFF. Under mode MacPas \$ALIGN also supports MAC68K, POWER and RESET.
-scan_e_illegal_pack_enum=02016_E_Especificador de tamanho minimo de variavel tipo enum invalido "$1"
-% You are specifying the \var{\{\$PACKENUM n\}} with an illegal value for
-% \var{n}. Only 1,2,4, NORMAL or DEFAULT are valid here.
-scan_e_endif_expected=02017_E_$ENDIF esperado para $1 $2 definidos em $3 na linha $4
-% Your conditional compilation statements are unbalanced.
-scan_e_preproc_syntax_error=02018_E_Erro de sintaxe na interpretacao(parse) de uma expressao de compilacao condicional
-% There is an error in the expression following the \var{\{\$if ..\}}, $ifc or $setc compiler
-% directives.
-scan_e_error_in_preproc_expr=02019_E_Avaliacao de uma expressao de compilacao condicional
-% There is an error in the expression following the \var{\{\$if ..\}}, $ifc or $setc compiler
-% directives.
-scan_w_macro_cut_after_255_chars=02020_W_O tamanho maximo de uma macro esta limitado a 255 caracteres
-% The contents of macros cannot be longer than 255 characters.
-scan_e_endif_without_if=02021_E_ENDIF sem correspondente IF(N)DEF
-% Your \var{\{\$IFDEF ..\}} and {\{\$ENDIF\}} statements aren't balanced.
-scan_f_user_defined=02022_F_Definido pelo usuario: $1
-% A user defined fatal error occurred. see also the \progref
-scan_e_user_defined=02023_E_Definido pelo usuario: $1
-% A user defined error occurred. see also the \progref
-scan_w_user_defined=02024_W_Definido pelo usuario: $1
-% A user defined warning occurred. see also the \progref
-scan_n_user_defined=02025_N_Definido pelo usuario: $1
-% A user defined note was encountered. see also the \progref
-scan_h_user_defined=02026_H_Definido pelo usuario: $1
-% A user defined hint was encountered. see also the \progref
-scan_i_user_defined=02027_I_Definido pelo usuario: $1
-% User defined information was encountered. see also the \progref
-scan_e_keyword_cant_be_a_macro=02028_E_Macro que substitui palavra chave nao tem efeito
-% You cannot redefine keywords with macros.
-scan_f_macro_buffer_overflow=02029_F_Overflow no buffer de macros durante leitura/expansao de macro
-% Your macro or its result was too long for the compiler.
-scan_w_macro_too_deep=02030_W_Mais de 16 niveis de aninhamento de macro.
-% When expanding a macro, macros have been nested to a level of 16.
-% The compiler will expand no further, since this may be a sign that
-% recursion is used.
-scan_w_wrong_styled_switch=02031_W_Diretivas de compilador nao sao aceitas em comentarios tipo //
-% Compiler switches should be in normal pascal style comments.
-scan_d_handling_switch=02032_DL_Tratando diretiva "$1"
-% When you set debugging info on (\var{-vd}) the compiler tells you when it
-% is evaluating conditional compile statements.
-scan_c_endif_found=02033_CL_ENDIF $1 encontrado
-% When you turn on conditional messages(\var{-vc}), the compiler tells you
-% where it encounters conditional statements.
-scan_c_ifdef_found=02034_CL_IFDEF $1 encontrado, $2
-% When you turn on conditional messages(\var{-vc}), the compiler tells you
-% where it encounters conditional statements.
-scan_c_ifopt_found=02035_CL_IFOPT $1 encontrado $2
-% When you turn on conditional messages(\var{-vc}), the compiler tells you
-% where it encounters conditional statements.
-scan_c_if_found=02036_CL_IF $1 encontrado, $2
-% When you turn on conditional messages(\var{-vc}), the compiler tells you
-% where it encounters conditional statements.
-scan_c_ifndef_found=02037_CL_IFNDEF $1 encontrado, $2
-% When you turn on conditional messages(\var{-vc}), the compiler tells you
-% where it encounters conditional statements.
-scan_c_else_found=02038_CL_ELSE $1 encontrado, $2
-% When you turn on conditional messages(\var{-vc}), the compiler tells you
-% where it encounters conditional statements.
-scan_c_skipping_until=02039_CL_Desprezando ate...
-% When you turn on conditional messages(\var{-vc}), the compiler tells you
-% where it encounters conditional statements, and whether it is skipping or
-% compiling parts.
-scan_i_press_enter=02040_I_Tecle <return> para continuar
-% When the \var{-vi} switch is used, the compiler stops compilation
-% and waits for the \var{Enter} key to be pressed when it encounters
-% a \var{\{\$STOP\}} directive.
-scan_w_unsupported_switch=02041_W_Diretiva nao suportada "$1"
-% When warnings are turned on (\var{-vw}) the compiler warns you about
-% unsupported switches. This means that the switch is used in Delphi or
-% Turbo Pascal, but not in \fpc
-scan_w_illegal_directive=02042_W_Diretiva de compilador invalida "$1"
-% When warings are turned on (\var{-vw}) the compiler warns you about
-% unrecognised switches. For a list of recognised switches, \progref
-scan_t_back_in=02043_TL_De volta em $1
-% When you use (\var{-vt}) the compiler tells you when it has finished
-% reading an include file.
-scan_w_unsupported_app_type=02044_W_Application type nao suportado: "$1"
-% You get this warning, if you specify an unknown application type
-% with the directive \var{\{\$APPTYPE\}}
-scan_w_app_type_not_support=02045_W_APPTYPE nao suportado pelo Sist.Op. de execucao
-% The \var{\{\$APPTYPE\}} directive is supported by certain operating systems only.
-scan_w_description_not_support=02046_W_Diretiva DESCRIPTION nao e suportada pelo Sist.Op. de execucao
-% The \var{\{\$DESCRIPTION\}} directive is not supported on this target OS
-scan_n_version_not_support=02047_N_Diretiva VERSION nao e suportada pelo Sist.Op. de execucao
-% The \var{\{\$VERSION\}} directive is not supported on this target OS
-scan_n_only_exe_version=02048_N_Diretiva VERSION e so para executaveis ou DLLs
-% The \var{\{\$VERSION\}} directive is only used for executable or DLL sources.
-scan_w_wrong_version_ignored=02049_W_Formato da diretiva VERSION errado "$1"
-% The \var{\{\$VERSION\}} directive format is majorversion.minorversion
-% where majorversion and minorversion are words.
-scan_e_illegal_asmmode_specifier=02050_E_Valor invalido na diretiva ASMMODE "$1"
-% When you specify an assembler mode with the \var{\{\$ASMMODE xxx\}}
-% the compiler didn't recognize the mode you specified.
-scan_w_no_asm_reader_switch_inside_asm=02051_W_Nao e possivel trocar tipo de assembly dentro de 1 trecho em assembly, a diretiva "$1" sera valida so no proximo trecho assembly
-% It is not possible to switch from one assembler reader to another
-% inside an assembler block. The new reader will be used for next
-% assembler statements only.
-scan_e_wrong_switch_toggle=02052_E_Valor de diretiva invalido, use ON/OFF ou +/-
-% You need to use ON or OFF or a + or - to toggle the switch
-scan_e_resourcefiles_not_supported=02053_E_Resource files nao sao suportados no Sist.Op. de execucao
-% The target you are compiling for doesn't support resource files.
-scan_w_include_env_not_found=02054_W_Variavel de ambiente "$1" nao encontrada
-% The included environment variable can't be found in the environment, it will
-% be replaced by an empty string instead.
-scan_e_invalid_maxfpureg_value=02055_E_Valor invalido para diretiva MAXFPUREGISTERS
-% Valid values for this directive are 0..8 and NORMAL/DEFAULT
-scan_w_only_one_resourcefile_supported=02056_W_O Sist.Op. de execucao suporta somente 1 resource file
-% The target you are compiling for supports only one resource file.
-% The first resource file found is used, the others are discarded.
-scan_w_macro_support_turned_off=02057_W_Suporte a macros foi desativado
-% A macro declaration has been found, but macro support is currently off,
-% so the declaration will be ignored. To turn macro support on compile with
-% -Sm on the commandline or add \{\$MACRO ON\} in the source
-scan_e_invalid_interface_type=02058_E_Tipo de interface invalido. Valores validos sao COM, CORBA or DEFAULT.
-% The interface type that was specified is not supported
-scan_w_appid_not_support=02059_W_APPID so e suportada pelo Sist.Op. de execucao PalmOS
-% The \var{\{\$APPID\}} directive is only supported for the PalmOS target.
-scan_w_appname_not_support=02060_W_APPNAME so e suportada pelo Sist.Op. de execucao PalmOS
-% The \var{\{\$APPNAME\}} directive is only supported for the PalmOS target.
-scan_e_string_exceeds_255_chars=02061_E_Constantes string nao podem exceder 255 caracteres
-% A single string constant can contain at most 255 chars. Try splitting up the
-% string in multiple smaller parts and concatenate them with a + operator.
-scan_f_include_deep_ten=02062_F_Numero de include files aninhados excede 16 niveis
-% When including include files the files have been nested to a level of 16.
-% The compiler will expand no further, since this may be a sign that
-% recursion is used.
-scan_e_too_many_push=02063_F_Numero maximo de niveis de PUSH excedido
-% A maximum of 20 levels is allowed. This error occurs only in mode MacPas.
-scan_e_too_many_pop=02064_E_POP nao precedido de PUSH
-% This error occurs only in mode MacPas.
-scan_e_error_macro_lacks_value=02065_E_Macro ou variavel de tempo de compilacao "$1" vazia ou sem valor atribuido
-% Thus the conditional compile time expression cannot be evaluated.
-scan_e_wrong_switch_toggle_default=02066_E_Valor de diretiva invalido, use ON/OFF/DEFAULT ou +/-/*
-% You need to use ON or OFF or DEFAULT or a + or - or * to toggle the switch
-scan_e_mode_switch_not_allowed=02067_E_Diretiva Mode "$1" nao permitida aqui
-% A mode switch has already been encountered, or, in case of option -Mmacpas,
-% a mode switch occur after UNIT.
-scan_e_error_macro_undefined=02068_E_Variavel de tempo de compilacao "$1" nao definida
-% Thus the conditional compile time expression cannot be evaluated. Only in mode MacPas.
-scan_e_utf8_bigger_than_65535=02069_E_Encontrado caracter com codigo UTF-8 maior do que 65535
-% \fpc handles utf-8 strings internally as widestrings e.g. the char codes are limited to 65535
-scan_e_utf8_malformed=02070_E_String UTF-8 com caracteres invalidos
-% The given string isn't a valid UTF-8 string
-scan_c_switching_to_utf8=02071_C_Encontrada assinatura UTF-8, conteudo do arquivo sera tratado como sendo UTF-8
-% The compiler found an UTF-8 encoding signature (\$ef, \$bb, \$bf) at the beginning of a file,
-% so it interprets it as an UTF-8 file
-scan_e_compile_time_typeerror=02072_E_Expressao em tempo de compilacao: Esperado $1 mas encontrado $2 em $3
-% Type check of a compile time expression failed.
-scan_n_app_type_not_support=02073_N_Diretiva APPTYPE nao suportada pelo sistema operacional de destino
-% The \var{\{\$APPTYPE\}} directive is supported by certain operating systems only.
-scan_e_illegal_optimization_specifier=02074_E_Especificada otimizacao ilegal "$1"
-% When you specify an optimization with the \var{\{\$OPTIMIZATION xxx\}}
-% the compiler didn't recognize the optimization you specified.
-scan_w_setpeflags_not_support=02075_W_Diretiva SETPEFLAGS nao suportada pelo sistema operacional de destino
-% The \var{\{\$SETPEFLAGS\}} directive is not supported by the target OS
-scan_w_imagebase_not_support=02076_W_Diretiva IMAGEBASE nao suportada pelo sistema operacional de destino
-% The \var{\{\$IMAGEBASE\}} directive is not supported by the target OS
-scan_w_minstacksize_not_support=02077_W_Diretiva MINSTACKSIZE nao suportada pelo sistema operacional de destino
-% The \var{\{\$MINSTACKSIZE\}} directive is not supported by the target OS
-scan_w_maxstacksize_not_support=02078_W_Diretiva MAXSTACKSIZE nao suportada pelo sistema operacional de destino
-% The \var{\{\$MAXSTACKSIZE\}} directive is not supported by the target OS
-% \end{description}
-#
-# Parser
-#
-# 03192 is the last used one
-#
-% \section{Parser messages}
-% This section lists all parser messages. The parser takes care of the
-% semantics of you language, i.e. it determines if your pascal constructs
-% are correct.
-% \begin{description}
-parser_e_syntax_error=03000_E_Parser - Erro de sintaxe
-% An error against the Turbo Pascal language was encountered. This happens
-% typically when an illegal character is found in the sources file.
-parser_e_dont_nest_interrupt=03004_E_INTERRUPT procedure nao pode ser local tem que ser global
-% An \var{INTERRUPT} procedure must be global.
-parser_w_proc_directive_ignored=03005_W_Tipo de procedure "$1" ignorado
-% The specified is ignored by FPC programs.
-parser_e_no_overload_for_all_procs=03006_E_OVERLOAD usado para "$1". Todas declaracoes devem usar OVERLOAD
-% When you want to use overloading using the \var{OVERLOAD} directive, then
-% all declarations need to have \var{OVERLOAD} specified.
-parser_e_export_name_double=03008_E_Funcoes exportadas com o nome externo "$1" igual
-% Exported function names inside a specific DLL must all be different
-parser_e_export_ordinal_double=03009_E_Funcoes exportadas com o index externo "$1" igual
-% Exported function names inside a specific DLL must all be different
-parser_e_export_invalid_index=03010_E_Valor de index externo de funcao exportada invalido
-% DLL function index must be in the range \var{1..\$FFFF}
-parser_w_parser_reloc_no_debug=03011_W_Informacoes de depuracao para DLL relocavel ou para executavel $1 nao funcionaram. Depuracao ignorada.
-parser_w_parser_win32_debug_needs_WN=03012_W_Para permitir depuracao de codigo win32 voce precisa desabilitar opcao de relocacao com a opcao -WN
-% Stabs info is wrong for relocatable DLL or EXES use -WN
-% if you want to debug win32 executables.
-parser_e_constructorname_must_be_init=03013_E_Nome do metodo Constructor deve ser INIT
-% You are declaring an object constructor with a name which is not \var{init}, and the
-% \var{-Ss} switch is in effect. See the \var{-Ss} switch (\seeo{Ss}).
-parser_e_destructorname_must_be_done=03014_E_Nome do metodo Destructor deve ser DONE
-% You are declaring an object destructor with a name which is not \var{done}, and the
-% \var{-Ss} switch is in effect. See the \var{-Ss} switch (\seeo{Ss}).
-parser_e_proc_inline_not_supported=03016_E_Uso de procedures tipo INLINE como no C++ nao suportado
-% You tried to compile a program with C++ style inlining, and forgot to
-% specify the \var{-Si} option (\seeo{Si}). The compiler doesn't support C++
-% styled inlining by default.
-parser_w_constructor_should_be_public=03018_W_Metodos Constructor devem estar em escopo "public" na classe
-% Constructors must be in the 'public' part of an object (class) declaration.
-parser_w_destructor_should_be_public=03019_W_Metodos Destructor devem estar em escopo "public" na classe
-% Destructors must be in the 'public' part of an object (class) declaration.
-parser_n_only_one_destructor=03020_N_Classes devem ter somente 1 metodo destructor
-% You can declare only one destructor for a class.
-parser_e_no_local_objects=03021_E_Declaracao de classes em escopo "local" nao permitida. Elas devem estar em escopo "global"
-% Classes must be defined globally. They cannot be defined inside a
-% procedure or function
-parser_f_no_anonym_objects=03022_F_Classes sem metodos e nao derivadas de outras(anonimas) nao sao permitidas
-% An invalid object (class) declaration was encountered, i.e. an
-% object or class without methods that isn't derived from another object or
-% class. For example:
-% \begin{verbatim}
-% Type o = object
-%          a : longint;
-%          end;
-% \end{verbatim}
-% will trigger this error.
-parser_n_object_has_no_vmt=03023_N_Nao ha entrada na VMT para o objeto "$1"
-% This is a note indicating that the declared object has no
-% virtual method table.
-parser_e_illegal_parameter_list=03024_E_Lista de argumentos invalida(tipos de dados diferem dos parametros)
-% You are calling a function with parameters that are of a different type than
-% the declared parameters of the function.
-parser_e_wrong_parameter_size=03026_E_Numero de parametros errado
-% There is an error in the parameter list of the function or procedure,
-% the number of parameters is not correct.
-parser_e_overloaded_no_procedure=03027_E_Metodo que esta fazendo overload e base do overload "$1" sao de tipo diferente (function/procedure)
-% The compiler encountered a symbol with the same name as an overloaded
-% function, but it is not a function it can overload.
-parser_e_overloaded_have_same_parameters=03028_E_Metodo tem mesma lista parametros do metodo sobre o qual queremos fazer overload
-% You're declaring overloaded functions, but with the same parameter list.
-% Overloaded function must have at least 1 different parameter in their
-% declaration.
-parser_e_header_dont_match_forward=03029_E_Tipo de retorno ou qualificador da funcao difere na declaracao forward "$1"
-% You declared a function with same parameters but
-% different result type or function modifiers.
-parser_e_header_different_var_names=03030_E_Header de funcao "$1" nao combina com o do forward : nome de variável trocado $2 => $3
-% You declared the function in the \var{interface} part, or with the
-% \var{forward} directive, but define it with a different parameter list.
-parser_n_duplicate_enum=03031_N_Valores especificados em tipos enumerados devem estar em ordem crescente
-% \fpc allows enumeration constructions as in C. Given the following
-% declaration two declarations:
-% \begin{verbatim}
-% type a = (A_A,A_B,A_E:=6,A_UAS:=200);
-% type a = (A_A,A_B,A_E:=6,A_UAS:=4);
-% \end{verbatim}
-% The second declaration would produce an error. \var{A\_UAS} needs to have a
-% value higher than \var{A\_E}, i.e. at least 7.
-parser_e_no_with_for_variable_in_other_segments=03033_E_"With" nao pode ser usado para variaveis in segmentos diferentes de memoria
-% With stores a variable locally on the stack,
-% but this is not possible if the variable belongs to another segment.
-parser_e_too_much_lexlevel=03034_E_Mais de 31 funcoes aninhadas
-% You can nest function definitions only 31 times.
-parser_e_range_check_error=03035_E_Erro de "range" durante apuracao de constantes
-% The constants are out of their allowed range.
-parser_w_range_check_error=03036_W_Erro de "range" durante apuracao de constantes
-% The constants are out of their allowed range.
-parser_e_double_caselabel=03037_E_Condicao duplicada em 1 comando case
-% You are specifying the same label 2 times in a \var{case} statement.
-parser_e_case_lower_less_than_upper_bound=03038_E_O valor superior de 1 "range" especificado num "case" e menor que o valor inferior
-% The upper bound of a \var{case} label is less than the lower bound and this
-% is useless
-parser_e_type_const_not_possible=03039_E_Constantes do tipo "class" ou "object" nao sao permitidas
-% You cannot declare a constant of type class or object.
-parser_e_no_overloaded_procvars=03040_E_Nao e permitido uso de variaveis tipo "function" em functions que sofrerao overload
-% You are trying to assign an overloaded function to a procedural variable.
-% This is not allowed
-parser_e_invalid_string_size=03041_E_Tamanho de string deve estar entre 1 e 255 bytes
-% The length of a shortstring in Pascal is limited to 255 characters. You are
-% trying to declare a string with length lower than 1 or greater than 255
-parser_w_use_extended_syntax_for_objects=03042_W_Use a sintaxe extendida de NEW e DISPOSE para instancias de objetos
-% If you have a pointer \var{a} to a class type, then the statement
-% \var{new(a)} will not initialize the class (i.e. the constructor isn't
-% called), although space will be allocated. you should issue the
-% \var{new(a,init)} statement. This will allocate space, and call the
-% constructor of the object
-parser_w_no_new_dispose_on_void_pointers=03043_W_Nao ha sentido em usar NEW ou DISPOSE para pointers untyped
-parser_e_no_new_dispose_on_void_pointers=03044_E_Nao e possivel usar NEW e DISPOSE para pointers untyped
-% You cannot use \var{new(p)} or \var{dispose(p)} if \var{p} is an untyped pointer
-% because no size is associated to an untyped pointer.
-% Accepted for compatibility in \var{tp} and \var{delphi} modes.
-parser_e_class_id_expected=03045_E_Identificador de classe ou objeto esperado antes do ponto
-% This happens when the compiler scans a procedure declaration that contains
-% a dot,
-% i.e., a object or class method, but the type in front of the dot is not
-% a known type.
-parser_e_no_type_not_allowed_here=03046_E_Identificador de type nao permitido neste contexto
-% You cannot use a type inside an expression.
-parser_e_methode_id_expected=03047_E_Metodo esperado apos o ponto
-% This identifier is not a method.
-% This happens when the compiler scans a procedure declaration that contains
-% a dot, i.e., a object or class method, but the procedure name is not a
-% procedure of this type.
-parser_e_header_dont_match_any_member=03048_E_Header de procedure/funcao "$1" nao identifica nenhum método desta classe
-% This identifier is not a method.
-% This happens when the compiler scans a procedure declaration that contains
-% a dot, i.e., a object or class method, but the procedure name is not a
-% procedure of this type.
-parser_d_procedure_start=03049_DL_procedure ou function $1
-% When using the \var{-vd} switch, the compiler tells you when it starts
-% processing a procedure or function implementation.
-parser_e_error_in_real=03050_E_Constante de ponto flutuante invalida
-% The compiler expects a floating point expression, and gets something else.
-parser_e_fail_only_in_constructor=03051_E_"FAIL" so pode ser usado em constructors
-% You are using the \var{fail} keyword outside a constructor method.
-parser_e_no_paras_for_destructor=03052_E_Metodos Destructor nao podem ter parametros
-% You are declaring a destructor with a parameter list. Destructor methods
-% cannot have parameters.
-parser_e_only_class_methods_via_class_ref=03053_E_Somente metodos de classe podem ser usados numa referencia de classe
-% This error occurs in a situation like the following:
-% \begin{verbatim}
-% Type :
-%    Tclass = Class of Tobject;
-%
-% Var C : TClass;
-%
-% begin
-% ...
-% C.free
-% \end{verbatim}
-% \var{Free} is not a class method and hence cannot be called with a class
-% reference.
-parser_e_only_class_methods=03054_E_Somente metodos da classe podem ser acessados em metodos de classe
-% This is related to the previous error. You cannot call a method of an object
-% from a inside a class method. The following code would produce this error:
-% \begin{verbatim}
-% class procedure tobject.x;
-%
-% begin
-%   free
-% \end{verbatim}
-% Because free is a normal method of a class it cannot be called from a class
-% method.
-parser_e_case_mismatch=03055_E_Constante usada numa clausula de um comando "case" nao combina com o tipo da variavel do "case"
-% One of the labels is not of the same type as the case variable.
-parser_e_illegal_symbol_exported=03056_E_O simbolo nao pode ser exportado de 1 library. So procedures ou functions
-% You can only export procedures and functions when you write a library. You
-% cannot export variables or constants.
-parser_w_should_use_override=03057_W_Um método herdado esta escondido(hidden) por "$1". Verifique se nao tem que usar a diretiva OVERRIDE
-% A method that is declared \var{virtual} in a parent class, should be
-% overridden in the descendent class with the \var{override} directive. If you
-% don't specify the \var{override} directive, you will hide the parent method;
-% you will not override it.
-parser_e_nothing_to_be_overridden=03058_E_Nao ha metodo em classe ancestral com este nome para sofrer overriden : "$1"
-% You are trying to \var{override} a virtual method of a parent class that does
-% not exist.
-parser_e_no_procedure_to_access_property=03059_E_Faltou a clausula "read" na declaracao da propriedade
-% You specified no \var{read} directive for a property.
-parser_w_stored_not_implemented=03060_W_Descontinuada
-% The \var{stored} directive is not yet implemented
-parser_e_ill_property_access_sym=03061_E_Simbolo invalido para acesso a uma propriedade(a propriedade e 1 array?)
-% There is an error in the \var{read} or \var{write} directives for an array
-% property. When you declare an array property, you can only access it with
-% procedures and functions. The following code would cause such an error.
-% \begin{verbatim}
-% tmyobject = class
-%   i : integer;
-%   property x [i : integer]: integer read I write i;
-% \end{verbatim}
-%
-parser_e_cant_access_protected_member=03062_E_Campo de objeto declarado como protected nao pode ser acessado aqui
-% Fields that are declared in a \var{protected} section of an object or class
-% declaration cannot be accessed outside the module where the object is
-% defined, or outside descendent object methods.
-parser_e_cant_access_private_member=03063_E_Campo de objeto declarado como private nao pode ser acessado aqui
-% Fields that are declared in a \var{private} section of an object or class
-% declaration cannot be accessed outside the module where the class is
-% defined.
-parser_e_overridden_methods_not_same_ret=03066_E_metodos envolvidos em override devem ter o mesmo tipo de retorno: "$2" faz override em "$1" que tem outro tipo de retorno
-% If you declare overridden methods in a class definition, they must
-% have the same return type.
-parser_e_dont_nest_export=03067_E_Functions/procedures nao podem ser declaradas aninhadas em functions/procedures que serao exportadas
-% You cannot declare a function or procedure within a function or procedure
-% that was declared as an export procedure.
-parser_e_methods_dont_be_export=03068_E_metodos nao podem ser exportados
-% You cannot declare a procedure that is a method for an object as
-% \var{export}ed.
-parser_e_call_by_ref_without_typeconv=03069_E_argumentos de chamadas por referencia tem que ter mesmo atributo que o parametro correspondente: Achado "$1" expected "$2"
-% When calling a function declared with \var{var} parameters, the variables in
-% the function call must be of exactly the same type. There is no automatic
-% type conversion.
-parser_e_no_super_class=03070_E_Metodo nao e de classe ancestral da que o esta chamando
-% When calling inherited methods, you are trying to call a method of a non-related
-% class. You can only call an inherited method of a parent class.
-parser_e_self_not_in_method=03071_E_Tentativa de usar "SELF" fora de um metodo
-% You are trying to use the \var{self} parameter outside an object's method.
-% Only methods get passed the \var{self} parameters.
-parser_e_generic_methods_only_in_methods=03072_E_so pode usar uma chamada no formato classe.metodo dentro de um metodo
-% A construction like \var{sometype.somemethod} is only allowed in a method.
-parser_e_illegal_colon_qualifier=03073_E_Uso de ':' em local invalido
-% You are using the format \var{:} (colon) 2 times on an expression that
-% is not a real expression.
-parser_e_illegal_set_expr=03074_E_Erro de range na declaracao de set: Elemento(s) duplicado(s) ou fora de faixa p/o tipo de dado
-% The declaration of a set contains an error. Either one of the elements is
-% outside the range of the set type, either two of the elements are in fact
-% the same.
-parser_e_pointer_to_class_expected=03075_E_Esperada pointer para um objeto
-% You specified an illegal type in a \var{new} statement.
-% The extended syntax of \var{new} needs an object as a parameter.
-parser_e_expr_have_to_be_constructor_call=03076_E_Expressao deve ser uma chamada a um constructor
-% When using the extended syntax of \var{new}, you must specify the constructor
-% method of the object you are trying to create. The procedure you specified
-% is not a constructor.
-parser_e_expr_have_to_be_destructor_call=03077_E_Expressao deve ser uma chamada a um destructor
-% When using the extended syntax of \var{dispose}, you must specify the
-% destructor method of the object you are trying to dispose of.
-% The procedure you specified is not a destructor.
-parser_e_invalid_record_const=03078_E_Campos declarados em ordem diferente da declaracao do record
-% When declaring a constant record, you specified the fields in the wrong
-% order.
-parser_e_false_with_expr=03079_E_O tipo de expressao deve ser de class ou de record
-% A \var{with} statement needs an argument that is of the type \var{record}
-% or \var{class}. You are using \var{with} on an expression that is not of
-% this type.
-parser_e_void_function=03080_E_Subrotinas/metodos do tipo "procedure" nao podem retornar valor
-% In \fpc, you can specify a return value for a function when using
-% the \var{exit} statement. This error occurs when you try to do this with a
-% procedure. Procedures cannot return a value.
-parser_e_constructors_always_objects=03081_E_Constructors e destructors devem ser metodos
-% You're declaring a procedure as destructor or constructor, when the
-% procedure isn't a class method.
-parser_e_operator_not_overloaded=03082_E_Um dos operandos nao esta na definicao deste operador
-% You're trying to use an overloaded operator when it is not overloaded for
-% this type.
-parser_e_no_such_assignment=03083_E_Impossivel overload com dados do mesmo tipo
-% You can not overload assignment for types
-% that the compiler considers as equal.
-parser_e_overload_impossible=03084_E_Combinacao de tipos do operador, dos argumentos e tipo de retorno incompativel
-% The combination of operator, arguments and return type are
-% incompatible.
-parser_e_no_reraise_possible=03085_E_Uso de raise nao e possivel aqui
-% You are trying to raise an exception where it is not allowed. You can only
-% raise exceptions in an \var{except} block.
-parser_e_no_new_or_dispose_for_classes=03086_E_Esta sintaxe de new ou dispose nao pode ser aplicada a classes
-% You cannot generate an instance of a class with the extended syntax of
-% \var{new}. The constructor must be used for that. For the same reason, you
-% cannot call \var{dispose} to de-allocate an instance of a class, the
-% destructor must be used for that.
-parser_e_procedure_overloading_is_off=03088_E_Overload de procedures esta desabilitado(ver diretiva -S)
-% When using the \var{-So} switch, procedure overloading is switched off.
-% Turbo Pascal does not support function overloading.
-parser_e_overload_operator_failed=03089_E_Este tipo de operador nao pode sofrer overload
-% You are trying to overload an operator which cannot be overloaded.
-% The following operators can be overloaded :
-% \begin{verbatim}
-%    +, -, *, /, =, >, <, <=, >=, is, as, in, **, :=
-% \end{verbatim}
-parser_e_comparative_operator_return_boolean=03090_E_Function que faca overload no operador = deve retornar "boolean"
-% When overloading the \var{=} operator, the function must return a boolean
-% value.
-parser_e_only_virtual_methods_abstract=03091_E_Somente metodos virtuais podem ser declarados "abstract"
-% You are declaring a method as abstract, when it is not declared to be
-% virtual.
-parser_f_unsupported_feature=03092_F_Feature nao suportada!
-% You're trying to force the compiler into doing something it cannot do yet.
-parser_e_mix_of_classes_and_objects=03093_E_A mistura de diferentes tipos de objetos(class, object, interface, etc) nao e permitida
-% You cannot derive \var{objects}, \var{classes}, \var{cppclasses} and \var{interfaces} interttwined . E.g.
-% a class cannot have an object as parent and vice versa.
-parser_w_unknown_proc_directive_ignored=03094_W_Diretiva desconhecida foi ignorada: "$1"
-% The procedure directive you specified is unknown.
-parser_e_absolute_only_one_var=03095_E_Absolute pode ser usado em linha que declare somente 1 variavel e redefinir variavel ou "typed constant"
-% You cannot specify more than one variable before the \var{absolute} directive.
-% Thus, the following construct will provide this error:
-% \begin{verbatim}
-% Var Z : Longint;
-%     X,Y : Longint absolute Z;
-% \end{verbatim}
-% \item [ absolute can only be associated a var or const ]
-% The address of a \var{absolute} directive can only point to a variable or a
-% typed constant. Therefore, the following code will produce this error:
-% \begin{verbatim}
-%   Procedure X;
-%
-%  var p : longint absolute x;
-% \end{verbatim}
-%
-parser_e_absolute_only_to_var_or_const=03096_E_Absolute so pode redefinir 1 variavel ou constante
-% The address of a \var{absolute} directive can only point to a variable or
-% constant. Therefore, the following code will produce this error:
-% \begin{verbatim}
-%   Procedure X;
-%
-%  var p : longint absolute x;
-% \end{verbatim}
-%
-parser_e_initialized_only_one_var=03097_E_Nao pode usar valor inicial em linha que declare mais de 1 variavel
-% You cannot specify more than one variable with a initial value
-% in Delphi mode.
-parser_e_abstract_no_definition=03098_E_Metodos abstract so podem ser declarados. Nao podem conter codigo
-% Abstract methods can only be declared, you cannot implement them. They
-% should be overridden by a descendant class.
-parser_e_overloaded_must_be_all_global=03099_E_Esta funcao que está sofrendo overload nao pode ser local (deve aparecer na interface)
-% You are defining a overloaded function in the implementation part of a unit,
-% but there is no corresponding declaration in the interface part of the unit.
-parser_w_virtual_without_constructor=03100_W_Objeto/classe contem metodos virtuais mas nao contem contructor em "$1"
-% If you declare objects or classes that contain virtual methods, you need
-% to have a constructor and destructor to initialize them. The compiler
-% encountered an object or class with virtual methods that doesn't have
-% a constructor/destructor pair.
-parser_c_macro_defined=03101_CL_Macro definida: $1
-% When \var{-vc} is used, the compiler tells you when it defines macros.
-parser_c_macro_undefined=03102_CL_Macro liberada ou "des-definida": $1
-% When \var{-vc} is used, the compiler tells you when it undefines macros.
-parser_c_macro_set_to=03103_CL_Macro $1 assumiu valor $2
-% When \var{-vc} is used, the compiler tells you what values macros get.
-parser_i_compiling=03104_I_Compilando "unit" $1
-% When you turn on information messages (\var{-vi}), the compiler tells you
-% what units it is recompiling.
-parser_u_parsing_interface=03105_UL_Interpretando "interface" da "unit" $1
-% This tells you that the reading of the interface
-% of the current unit starts
-parser_u_parsing_implementation=03106_UL_Interpretando "implementation" da "unit" $1
-% This tells you that the code reading of the implementation
-% of the current unit, library or program starts
-parser_d_compiling_second_time=03107_DL_Recompilando $1
-% When you request debug messages (\var{-vd}) the compiler tells you what
-% units it recompiles for the second time.
-parser_e_no_property_found_to_override=03109_E_Propriedade para sofrer override nao existe
-% You want to override a property of a parent class, when there is, in fact,
-% no such property in the parent class.
-parser_e_only_one_default_property=03110_E_Tentativa de definir propriedade default para classe que ja tem 1 default
-% You specified a property as \var{Default}, but the class already has a
-% default property, and a class can have only one default property.
-parser_e_property_need_paras=03111_E_A propriedade default deve ser uma "array property"
-% Only array properties of classes can be made \var{default} properties.
-parser_e_constructor_cannot_be_not_virtual=03112_E_Virtual constructors podem ser usados somente para classes
-% You cannot have virtual constructors in objects. You can only have them
-% in classes.
-parser_e_no_default_property_available=03113_E_Nao ha propriedade default disponivel(nem por heranca)
-% You are trying to access a default property of a class, but this class (or one of
-% its ancestors) doesn't have a default property.
-parser_e_cant_have_published=03114_E_A classe nao pode ter uma "published section", use a diretiva {$M+}
-% If you want a \var{published} section in a class definition, you must
-% use the \var{\{\$M+\}} switch, whch turns on generation of type
-% information.
-parser_e_forward_declaration_must_be_resolved=03115_E_A declaracao com forward da classe "$1" precisa ser resolvida aqui para poder usar esta classe como ancestral
-% To be able to use an object as an ancestor object, it must be defined
-% first. This error occurs in the following situation:
-% \begin{verbatim}
-%  Type ParentClas = Class;
-%       ChildClass = Class(ParentClass)
-%         ...
-%       end;
-% \end{verbatim}
-% Where \var{ParentClass} is declared but not defined.
-parser_e_no_local_operator=03116_E_Nao pode fazer overload de operadores locais
-% You cannot overload locally, i.e. inside procedures or function
-% definitions.
-parser_e_proc_dir_not_allowed_in_interface=03117_E_A diretiva "$1" nao e permitida secao "interface"
-% This procedure directive is not allowed in the \var{interface} section of
-% a unit. You can only use it in the \var{implementation} section.
-parser_e_proc_dir_not_allowed_in_implementation=03118_E_A diretiva "$1" nao e permitida secao "implementation"
-% This procedure directive is not defined in the \var{implementation} section of
-% a unit. You can only use it in the \var{interface} section.
-parser_e_proc_dir_not_allowed_in_procvar=03119_E_A diretiva "$1" nao e permitida na area de declaracao de variaveis de 1 procedure/function
-% This procedure directive cannot be part of a procedural or function
-% type declaration.
-parser_e_function_already_declared_public_forward=03120_E_Procedure/function ja foi declarada como Public/Forward "$1"
-% You will get this error if a function is defined as \var{forward} twice.
-% Or it is once in the \var{interface} section, and once as a \var{forward}
-% declaration in the \var{implmentation} section.
-parser_e_not_external_and_export=03121_E_Nao pode usar EXPORT e EXTERNAL simultaneamente
-% These two procedure directives are mutually exclusive
-parser_w_not_supported_for_inline=03123_W_"$1" ainda nao e suportada em "inline procedure/function"
-% Inline procedures don't support this declaration.
-parser_w_inlining_disabled=03124_W_O uso de INLINE esta desabilitado(diretiva $I)
-% Inlining of procedures is disabled.
-parser_i_writing_browser_log=03125_I_Avisa que gravou log do simbolo $1 gerado pelo "symbol browser"
-% When information messages are on, the compiler warns you when it
-% writes the browser log (generated with the \var{\{\$Y+ \}} switch).
-parser_h_maybe_deref_caret_missing=03126_H_Pode estar faltando uma "pointer dereference". Meramente um comentario p/questoes de sintaxe em relacao ao Delphi p/exemplo
-% The compiler thinks that a pointer may need a dereference.
-parser_f_assembler_reader_not_supported=03127_F_Tipo de assembly nao suportado
-% The selected assembler reader (with \var{\{\$ASMMODE xxx\}} is not
-% supported. The compiler can be compiled with or without support for a
-% particular assembler reader.
-parser_e_proc_dir_conflict=03128_E_Diretiva "$1" conflita com outras diretivas
-% You specified a procedure directive that conflicts with other directives.
-% for instance \var{cdecl} and \var{pascal} are mutually exclusive.
-parser_e_call_convention_dont_match_forward=03129_E_Interface/implementation "calling conventions" nao combinam(cdecl?)
-% This error happens when you declare a function or procedure with
-% e.g. \var{cdecl;} but omit this directive in the implementation, or vice
-% versa. The calling convention is part of the function declaration, and
-% must be repeated in the function definition.
-parser_e_property_cant_have_a_default_value=03131_E_A propriedade nao pode ter valor default(e tipo array ou set?)
-% Set properties or indexed properties cannot have a default value.
-parser_e_property_default_value_must_const=03132_E_O valor default de 1 propriedade deve ser uma constante
-% The value of a \var{default} declared property must be known at compile
-% time. The value you specified is only known at run time. This happens
-% .e.g. if you specify a variable name as a default value.
-parser_e_cant_publish_that=03133_E_Simbolo nao pode ser published. Somente propriedades e variaveis "class type"
-% Only class type variables can be in a \var{published} section of a class
-% if they are not declared as a property.
-parser_e_cant_publish_that_property=03134_E_Propriedades com este tipo de dados nao podem ser "published"
-% Properties in a \var{published} section cannot be array properties.
-% they must be moved to public sections. Properties in a \var{published}
-% section must be an ordinal type, a real type, strings or sets.
-parser_e_empty_import_name=03136_E_Procedures/functions que sao exportadas de DLL's devem ter 1 "external name"
-% Some targets need a name for the imported procedure or a \var{cdecl} specifier
-parser_e_division_by_zero=03138_E_Divisao por zero
-% There is a division by zero encounted
-parser_e_invalid_float_operation=03139_E_Operacao de ponto flutuante invalida
-% An operation on two real type values produced an overflow or a division
-% by zero.
-parser_e_array_lower_less_than_upper_bound=03140_E_Fim da faixa menor que o inicio da faixa
-% The upper bound of a an array declaration is less than the lower bound and this
-% is not possible
-parser_w_string_too_long=03141_W_Constante string "$1" e maior que a declaracao da variavel string "$2"
-% The size of the constant string is larger than the size you specified in
-% string type definition
-parser_e_string_larger_array=03142_E_Constante string maior do que o "array of char" a qual esta sendo atribuida
-% The size of the constant string is larger than the size you specified in
-% the array[x..y] of char definition
-parser_e_ill_msg_expr=03143_E_Expressao invalida apos uma diretiva
-% \fpc supports only integer or string values as message constants
-parser_e_ill_msg_param=03144_E_Metodos declarados com a diretiva {message}(message handlers) so podem ter 1 parametro e recebido por referencia
-% A method declared with the \var{message}-directive as message handler
-% can take only one parameter which must be declared as call by reference
-% Parameters are declared as call by reference using the \var{var}-directive
-parser_e_duplicate_message_label=03145_E_Label de mensagem duplicado: "$1"
-% A label for a message is used twice in one object/class
-parser_e_self_in_non_message_handler=03146_E_"Self" so pode ser usado como parametro explicito em metodos declarados com diretiva {message}(message handlers)
-% The self parameter can only be passed explicitly to a method which
-% is declared as message handler.
-parser_e_threadvars_only_sg=03147_E_Variaveis "Threadvars" so podem ser "static" ou "global"
-% Threadvars must be static or global, you can't declare a thread
-% local to a procedure. Local variables are always local to a thread,
-% because every thread has its own stack and local variables
-% are stored on the stack
-parser_f_direct_assembler_not_allowed=03148_F_"Direct assembly" nao e suportado quando usando formato binario de saida
-% You can't use direct assembler when using a binary writer, choose an
-% other outputformat or use an other assembler reader
-parser_w_no_objpas_use_mode=03149_W_Nao carregue OBJPAS unit com "uses", use \{\$mode objfpc\} ou \{\$mode delphi\} ao inves disto
-% You are trying to load the ObjPas unit manually from a uses clause. This is
-% not a good idea. Use the \var{\{\$mode objfpc\}} or
-% \var{\{\$mode delphi\}}
-% directives which load the unit automatically
-parser_e_no_object_override=03150_E_Nao e possivel fazer OVERRIDE em metodos de "object's"
-% Override is not supported for objects, use \var{virtual} instead to override
-% a method of a parent object
-parser_e_cant_use_inittable_here=03151_E_Tipos de dados que requeiram inicializacao/finalizacao nao podem ser usados em registros "variant"
-% Some data type (e.g. \var{ansistring}) needs initialization/finalization
-% code which is implicitly generated by the compiler. Such data types
-% can't be used in the variant part of a record.
-parser_e_resourcestring_only_sg=03152_E_Resourcestrings so podem ser declarados static ou global
-% Resourcestring can not be declared local, only global or using the static
-% directive.
-parser_e_exit_with_argument_not__possible=03153_E_"Exit" com argumento neste contexto, nao e permitido
-% an exit statement with an argument for the return value can't be used here, this
-% can happen e.g. in \var{try..except} or \var{try..finally} blocks
-parser_e_stored_property_must_be_boolean=03154_E_Simbolo de tipo de memoria deve ser booleano
-% If you specify a storage symbol in a property declaration, it must be of
-% the type boolean
-parser_e_ill_property_storage_sym=03155_E_Este simbolo nao e permitido como simbolo memoria
-% You can't use this type of symbol as storage specifier in property
-% declaration. You can use only methods with the result type boolean,
-% boolean class fields or boolean constants
-parser_e_only_publishable_classes_can__be_published=03156_E_So e permitido publicar classes compiladas com a diretiva $M+
-% In the published section of a class can be only class as fields used which
-% are compiled in \var{\{\$M+\}} or which are derived from such a class. Normally
-% such a class should be derived from TPersitent
-parser_e_proc_directive_expected=03157_E_Esperada diretiva de procedure
-% When declaring a procedure in a const block you used a ; after the
-% procedure declaration after which a procedure directive must follow.
-% Correct declarations are:
-% \begin{verbatim}
-% const
-%   p : procedure;stdcall=nil;
-%   p : procedure stdcall=nil;
-% \end{verbatim}
-parser_e_invalid_property_index_value=03158_E_O valor do "index" de uma propriedade deve ser do tipo ordinal
-% The value you use to index a property must be of an ordinal type, for
-% example an integer or enumerated type.
-parser_e_procname_to_short_for_export=03159_E_Nome de procedure/function que sera exportada tem que ter no minimo 2 caracteres
-% The length of the procedure/function name must be at least 2 characters
-% long. This is because of a bug in dlltool which doesn't parse the .def
-% file correct with a name of length 1.
-parser_e_dlltool_unit_var_problem=03160_E_Nao foi possivel gerar 1 DEFFILE para as variaveis globais da "unit"
-parser_e_dlltool_unit_var_problem2=03161_E_Compile sem a opcao -WD
-% You need to compile this file without the -WD switch on the
-% commandline
-parser_f_need_objfpc_or_delphi_mode=03162_F_Voce precisa de ObjFpc (-S2) ou Delphi (-Sd) mode para compilar este modulo
-% You need to use \{\$mode objfpc\} or \{\$mode delphi\} to compile this file.
-% Or use the equivalent commandline switches -S2 or -Sd.
-parser_e_no_export_with_index_for_target=03163_E_Nao e possivel exportar functions/procedures para este Sist.Op. $1
-% Exporting of functions or procedures with a specified index is not
-% supported on this target.
-parser_e_no_export_of_variables_for_target=03164_E_Exportacao de variaveis nao e permitida no Sist.Op. $1
-% Exporting of variables is not supported on this target.
-parser_e_improper_guid_syntax=03165_E_Sintaxe de declaracao GUID invalida
-parser_w_interface_mapping_notfound=03168_W_Procedure/function "$1" nao encontrada em contexto aplicavel para implementar $2.$3
-parser_e_interface_id_expected=03169_E_Esperado identificador de interface
-% This happens when the compiler scans a \var{class} declaration that contains
-% \var{interface} function name mapping code like this:
-% \begin{verbatim}
-% type
-%   TMyObject = class(TObject, IDispatch)
-%     function IUnknown.QueryInterface=MyQueryInterface;
-%     ....
-% \end{verbatim}
-% and the \var{interface} before the dot not listed in the inheritance list.
-parser_e_type_cant_be_used_in_array_index=03170_E_Tipo "$1" nao pode ser usado como "array index type"
-% Types like \var{qword} or \var{int64} aren't allowed as array index type
-parser_e_no_con_des_in_interfaces=03171_E_Constructors/destructors nao sao permitidos em interfaces
-% Constructor and destructor declarations aren't allowed in interface
-% In the most cases the method \var{QueryInterface} of \var{IUnknown} can
-% be used to create a new interface.
-parser_e_no_access_specifier_in_interfaces=03172_E_Especificacoes de visibilidade nao podem ser usadas em INTERFACES
-% The access specifiers \var{public}, \var{private}, \var{protected} and
-% \var{pusblished} can't be used in interfaces because all methods
-% of an interfaces must be public.
-parser_e_no_vars_in_interfaces=03173_E_Interfaces nao podem conter definicoes de campos
-% Declarations of fields aren't allowed in interfaces. An interface
-% can contain only methods
-parser_e_no_local_proc_external=03174_E_Nao e permitido declarar procedures locais como EXTERNAL
-% Declaring local procedures as external is not possible. Local procedures
-% get hidden parameters that will make the chance of errors very high
-parser_w_skipped_fields_before=03175_W_Alguns campos antes de "$1" nao foram inicializados
-% In Delphi mode, not all fields of a typed constant record have to be
-% initialized, but the compiler warns you when it detects such situations.
-parser_e_skipped_fields_before=03176_E_Alguns campos antes de "$1" nao foram inicializados
-% In all syntax modes but Delphi mode, you can't leave some fields uninitialized
-% in the middle of a typed constant record
-parser_w_skipped_fields_after=03177_W_Alguns campos apos "$1" nao foram inicializados
-% You can leave some fields at the end of a type constant record uninitialized
-% (the compiler will initialize them to zero automatically). This may be the cause
-% of subtle problems.
-parser_e_varargs_need_cdecl_and_external=03178_E_A diretiva VarArgs usada em procedure/function nao CDecl nem External
-% The varargs directive can only be used with procedures or functions
-% that are declared with \var{cdecl} and \var{external} directives. The varargs directive
-% is only meant to provide a compatible interface to C functions like printf.
-parser_e_self_call_by_value=03179_E_Self deve ser 1 parametro recebido p/valor(nao pode ser uma variavel/constante)
-% You can't declare self as a const or var parameter, it must always be
-% a call-by-value parameter
-parser_e_interface_has_no_guid=03180_E_Interface "$1" precisa ter 1 identificacao GUID
-% When you want to assign an interface to a constant, then the interface
-% must have a GUID value set.
-parser_e_illegal_field_or_method=03181_E_Campo de classe ou nome de metodo desconhecido "$1"
-% Properties must refer to a field or method in the same class.
-parser_w_proc_overriding_calling=03182_W_"Calling convention" "$2" substituira a "$1"
-% There are two directives in the procedure declaration that specify a calling
-% convention. Only the last directive will be used
-parser_e_no_procvarobj_const=03183_E_"Typed" constantes do tipo "procedure of object" so podem ser inicializadas com NIL
-% You can't assign the address of a method to a typed constant which has a
-% 'procedure of object' type, because such a constant requires two addresses:
-% that of the method (which is known at compile time) and that of the object or
-% class instance it operates on (which can not be known at compile time).
-parser_e_default_value_only_one_para=03184_E_Valor default so pode ser atribuido a 1 parametro
-parser_e_default_value_expected_for_para=03185_E_Parametro default requerido para "$1"
-parser_w_unsupported_feature=03186_W_Use de feature nao suportada
-% You're trying to force the compiler into doing something it cannot do yet.
-parser_h_c_arrays_are_references=03187_H_Parametros passados a functions/procedures em C devem ser passados por referencia(pointer)
-% Any array passed to a C functions is passed
-% by a pointer (i.e. by reference).
-parser_e_C_array_of_const_must_be_last=03188_E_Array de constantes deve ser o ultimo argumento de uma chamada do C
-% You can not add any other argument after an \var{array of const} for
-% \var{cdecl} functions, as the size pushed on stack for this argument is
-% not known.
-parser_h_type_redef=03189_H_O "type" "$1" ja foi criado, tentativa de redefinicao
-% This is an indicator that a previously declared type is
-% being redefined as something else. This may, or may not
-% be, a cause for errors.
-parser_w_cdecl_has_no_high=03190_W_Functions/procedures declaradas CDECL nao suportam funcoes built in do compilador FPC
-% Functions declared with cdecl modifier do not pass an extra implicit parameter.
-parser_w_cdecl_no_openstring=03191_W_Functions/procedures declaradas CDECL devem ser chamadas com string de tamanho igual ao declarado no cabecalho da Function/procedure
-% Openstring is not supported for cdecl'ared functions.
-parser_e_initialized_not_for_threadvar=03192_E_Variaveis "threadvar" nao podem ser inicializadas
-% Variables declared as threadvar can not be initialized with a default value.
-% The variables will always be filled with zero at the start of a new thread.
-parser_e_msg_only_for_classes=03193_E_A diretiva MESSAGE so e permitida em Classes
-% The message directive is only supported for Class types.
-parser_e_procedure_or_function_expected=03194_E_Procedure/Function esperada
-% A class method can only be specified for procedures and functions.
-parser_e_illegal_calling_convention=03195_W_Diretiva de "calling convention" ignorada: "$1"
-% Some calling conventions are supported only by certain CPUs. I.e. most non-i386 ports support
-% only the standard ABI calling convention of the CPU.
-parser_e_no_object_reintroduce=03196_E_REINTRODUCE nao pode ser usado em objetos
-% \var{reintroduce} is not supported for objects.
-parser_e_paraloc_only_one_para=03197_E_Cada argumento tem sua devida posicao
-% If locations for arguments are specified explicitly as it is required by
-% some syscall conventions, each argument must have it's only location, things
-% like \var{procedure p(i,j : longint 'r1');} aren't allowed
-parser_e_paraloc_all_paras=03198_E_Cada argumento tem sua posicao especifica
-% If one argument has an explicit argument location, all arguments of a procedure
-% must have one.
-parser_e_illegal_explicit_paraloc=03199_E_Posicao do argumento desconhecida
-% The location specified for an argument isn't recognized by the compiler
-parser_e_32bitint_or_pointer_variable_expected=03200_E_Esperado um inteiro de 32 bits ou uma pointer
-% The libbase for MorphOS/AmigaOS can be give only as \var{longint}, \var{dword} or any pointer variable.
-parser_e_goto_outside_proc=03201_E_Comando GOTO nao pode desviar para label fora da procedure/function
-% It isn't allowed to use the \var{goto} statements referencing labels outside the
-% current procedure. The following example shows the problem:
-% \begin{verbatim}
-% ...
-%   procedure p1;
-%   label
-%     l1;
-%
-%     procedure p2;
-%     begin
-%       goto l1; // This goto ISN'T allowed
-%     end;
-%
-%   begin
-%     p2
-%   l1:
-%   end;
-% ...
-%
-% \end{verbatim}
-parser_f_too_complex_proc=03202_F_Procedure muito complexa, ela requer registradores demais
-% Your procedure body is too long for the compiler. You should split the
-% procedure into multiple smaller procedures.
-parser_e_illegal_expression=03203_E_Expressão inválida
-% This can occur under many circumstances. Mostly when trying to evaluate
-% constant expressions.
-parser_e_invalid_integer=03204_E_Resultado da expressao nao e "integer"
-% You made an expression which isn't an integer, and the compiler expects the
-% result to be an integer.
-parser_e_invalid_qualifier=03205_E_Qualificador invalido
-% One of the following is happening :
-% \begin{itemize}
-% \item You're trying to access a field of a variable that is not a record.
-% \item You're indexing a variable that is not an array.
-% \item You're dereferencing a variable that is not a pointer.
-% \end{itemize}
-parser_e_upper_lower_than_lower=03206_E_Limite superior < limite inferior
-% You are declaring a subrange, and the lower limit is higher than the high
-% limit of the range.
-parser_e_macpas_exit_wrong_param=03207_E_O parametro do Exit deve ser o nome da procedure onde ele e usado
-% Non local exit is not allowed. This error occurs only in mode MacPas.
-parser_e_illegal_assignment_to_count_var=03208_E_Assinalamento invalido para a variavel de controle do loop "for" "$1"
-% The type of a \var{for} loop variable must be an ordinal type.
-% Loop variables cannot be reals or strings.
-parser_e_no_local_var_external=03209_E_Variaveis locais nao podem ser declaradas EXTERNAL
-% Declaring local variables as external is not allowed. Only global variables can reference
-% to external variables.
-parser_e_proc_already_external=03210_E_Procedure ja foi declarada EXTERNAL
-% The procedure is already declared with the EXTERNAL directive in an interface or
-% forward declaration.
-parser_w_implicit_uses_of_variants_unit=03211_W_Assumido uso de Variants unit
-% The Variant type is used in the unit without any used unit using the Variants unit. The
-% compiler has implicitly added the Variants unit to the uses list. To remove this warning
-% the Variants unit needs to be added to the uses statement.
-parser_e_no_static_method_in_interfaces=03212_E_Classes e metodos static nao podem ser usados em INTERFACES
-% The specifier \var{class} and directive \var{static} can't be used in interfaces
-% because all methods of an interfaces must be public.
-parser_e_arithmetic_operation_overflow=03213_E_Overflow em operacao aritmetica
-% An operation on two integers values produced an overflow
-parser_e_protected_or_private_expected=03214_E_Protected ou private esperados
-% \var{strict} can be only used together with \var{protected} or \var{private}.
-parser_e_illegal_slice=03215_E_SLICE nao pode ser usado fora de uma lista de parametros
-% \var{slice} can be used only for arguments accepting an open array parameter
-parser_e_dispinterface_cant_have_parent=03216_E_Uma DISPINTERFACE nao pode ter classe pai
-% A DISPINMTERFACE is a special type of interface which can't have a parent class
-parser_e_dispinterface_needs_a_guid=03217_E_Uma DISPINTERFACE precisa de uma identificacao
-% A DISPINMTERFACE always needs an interface identification
-parser_w_overridden_methods_not_same_ret=03218_W_Metodos que fazem override em outros devem ter tipos de retorno relacionados ("$2" sofre override de "$1" que tem outro tipo de retorno))
-% If you declare overridden methods in a class definition, they must
-% have the same return type. Some versions of Delphi allow you to change the
-% return type of interface methods, and even to change procedures into
-% functions, but the resulting code may crash depending on the types used
-% and the way the methods are called.
-parser_e_dispid_must_be_ord_const=03219_E_Identificadores de prioridade de selecao devem ser constantes ordinais
-% \end{description}
-#
-# Type Checking
-#
-# 04049 is the last used one
-#
-% \section{Type checking errors}
-% This section lists all errors that can occur when type checking is
-% performed.
-% \begin{description}
-type_e_mismatch=04000_E_Type nao combina
-% This can happen in many cases:
-% \begin{itemize}
-% \item The variable you're assigning to is of a different type than the
-% expression in the assignment.
-% \item You are calling a function or procedure with parameters that are
-% incompatible with the parameters in the function or procedure definition.
-% \end{itemize}
-type_e_incompatible_types=04001_E_Tipos de dado incompativeis. Encontrado "$1" esperado "$2"
-% There is no conversion possible between the two types
-% Another possiblity is that they are declared in different
-% declarations:
-% \begin{verbatim}
-% Var
-%    A1 : Array[1..10] Of Integer;
-%    A2 : Array[1..10] Of Integer;
-%
-% Begin
-%    A1:=A2; { This statement gives also this error, it
-%              is due the strict type checking of pascal }
-% End.
-% \end{verbatim}
-type_e_not_equal_types=04002_E_Tipos de "$1" e "$2" nao combinam
-% The types are not equal
-type_e_type_id_expected=04003_E_Identificador de tipo(type) esperado
-% The identifier is not a type, or you forgot to supply a type identifier.
-type_e_variable_id_expected=04004_E_Esperada uma variavel
-% This happens when you pass a constant to a routine (such as \var{Inc} var or \var{Dec})
-% when it expects a variable. You can only pass variables as arguments to these functions.
-type_e_integer_expr_expected=04005_E_Esperada expressao do tipo "integer", mas encontrada "$1"
-% The compiler expects an expression of type integer, but gets a different
-% type.
-type_e_boolean_expr_expected=04006_E_Esperada expressao do tipo "boolean", mas encontrada "$1"
-% The expression must be a boolean type, it should be return true or
-% false.
-type_e_ordinal_expr_expected=04007_E_Esperada expressao do tipo "ordinal"
-% The expression must be of ordinal type, i.e., maximum a \var{Longint}.
-% This happens, for instance, when you specify a second argument
-% to \var{Inc} or \var{Dec} that doesn't evaluate to an ordinal value.
-type_e_pointer_type_expected=04008_E_Esperado tipo pointer, mas encontrado "$1"
-% The variable or expression isn't of the type \var{pointer}. This
-% happens when you pass a variable that isn't a pointer to \var{New}
-% or \var{Dispose}.
-type_e_class_type_expected=04009_E_Esperada uma classe, mas encontrado "$1"
-% The variable of expression isn't of the type \var{class}. This happens
-% typically when
-% \begin{enumerate}
-% \item The parent class in a class declaration isn't a class.
-% \item An exception handler (\var{On}) contains a type identifier that
-% isn't a class.
-% \end{enumerate}
-type_e_cant_eval_constant_expr=04011_E_Nao pude resolver a expressao
-% This error can occur when the bounds of an array you declared does
-% not evaluate to ordinal constants
-type_e_set_element_are_not_comp=04012_E_Os elementos dos "sets" sao incompativeis
-% You are trying to make an operation on two sets, when the set element types
-% are not the same. The base type of a set must be the same when taking the
-% union
-type_e_set_operation_unknown=04013_E_Operacao nao implementada para "sets"
-% several binary operations are not defined for sets
-% like div mod ** (also >= <= for now)
-type_w_convert_real_2_comp=04014_W_Conversao automatica de floating type para COMP o qual e do tipo "integer"
-% An implicit type conversion from a real type to a \var{comp} is
-% encountered. Since \var{comp} is a 64 bit integer type, this may indicate
-% an error.
-type_h_use_div_for_int=04015_H_Use o operador DIV para obter um resultado "integer"
-% When hints are on, then an integer division with the '/' operator will
-% procuce this message, because the result will then be of type real
-type_e_strict_var_string_violation=04016_E_String types nao combinam, por causa da diretiva $V+
-% When compiling in \var{\{\$V+\}} mode, the string you pass as a parameter
-% should be of the exact same type as the declared parameter of the procedure.
-type_e_succ_and_pred_enums_with_assign_not_possible=04017_E_Succ ou Pred em tipos "enumerated" que contenham atribuicoes nao e possivel
-% When you declared an enumeration type which has assignments in it, as in C,
-% like in the following:
-% \begin{verbatim}
-%   Tenum = (a,b,e:=5);
-% \end{verbatim}
-% you cannot use the \var{Succ} or \var{Pred} functions on them.
-type_e_cant_read_write_type=04018_E_Nao e possivel ler ou gravar variaveis deste "type"
-% You are trying to \var{read} or \var{write} a variable from or to a
-% file of type text, which doesn't support that. Only integer types,
-% reals, pchars and strings can be read from/written to a text file.
-% Booleans can only be written to text files.
-type_e_no_readln_writeln_for_typed_file=04019_E_Nao pode usar readln ou writeln em arquivo "typed"
-% \var{readln} and \var{writeln} are only allowed for text files.
-type_e_no_read_write_for_untyped_file=04020_E_Nao pode usar read ou write em arquivo "untyped"
-% \var{read} and \var{write} are only allowed for text or typed files.
-type_e_typeconflict_in_set=04021_E_Conflito de tipo entre 1 ou mais elementos e o tipo de dados do SET
-% There is at least one set element which is of the wrong type, i.e. not of
-% the set type.
-type_w_maybe_wrong_hi_lo=04022_W_lo/hi(dword/qword) retorna upper/lower nos formatos word/dword
-% \fpc supports an overloaded version of \var{lo/hi} for \var{longint/dword/int64/qword}
-% which returns the lower/upper word/dword of the argument. TP always uses
-% a 16 bit \var{lo/hi} which returns always bits 0..7 for \var{lo} and the
-% bits 8..15 for \var{hi}. If you want the TP behavior you have
-% to type cast the argument to \var{word/integer}
-type_e_integer_or_real_expr_expected=04023_E_Esperada expressao "integer" ou "real"
-% The first argument to \var{str} must a real or integer type.
-type_e_wrong_type_in_array_constructor=04024_E_Tipo "$1" invalido em "array constructor"
-% You are trying to use a type in an array constructor which is not
-% allowed.
-type_e_wrong_parameter_type=04025_E_Tipo incompativel para o arg no. $1: Recebido "$2", esperado "$3"
-% You are trying to pass an invalid type for the specified parameter.
-type_e_no_method_and_procedure_not_compatible=04026_E_Variaveis do tipo "procedure of object" nao sao compativeis com variaveis do tipo "procedure"
-% You can't assign a method to a procedure variable or a procedure to a
-% method pointer.
-type_e_wrong_math_argument=04027_E_Constante invalida passada para funcao matematica
-% The constant argument passed to a ln or sqrt function is out of
-% the definition range of these functions.
-type_e_no_addr_of_constant=04028_E_Nao e possivel obter endereco de constantes
-% It is not possible to get the address of a constant, because they
-% aren't stored in memory, you can try making it a typed constant.
-type_e_argument_cant_be_assigned=04029_E_Nao se pode atribuir dados a este argumento
-% Only expressions which can be on the left side of an
-% assignment can be passed as call by reference argument
-% Remark: Properties can be only
-% used on the left side of an assignment, but they cannot be used as arguments
-type_e_cannot_local_proc_to_procvar=04030_E_Nao pode atribuir procedure/function local a uma variavel do tipo "procedure"
-% It's not allowed to assign a local procedure/function to a
-% procedure variable, because the calling of local procedure/function is
-% different. You can only assign local procedure/function to a void pointer.
-type_e_no_assign_to_addr=04031_E_Nao pode atribuir valores a um endereco
-% It is not allowed to assign a value to an address of a variable,constant,
-% procedure or function. You can try compiling with -So if the identifier
-% is a procedure variable.
-type_e_no_assign_to_const=04032_E_Nao pode atribuir valores a uma variavel declarada como "const"
-% It's not allowed to assign a value to a variable which is declared
-% as a const. This is normally a parameter declared as const, to allow
-% changing the value make the parameter as a value parameter or a var.
-type_e_array_required=04033_E_Requerido tipo array
-% If you are accessing a variable using an index '[<x>]' then
-% the type must be an array. In FPC mode also a pointer is allowed.
-type_e_interface_type_expected=04034_E_Esperado tipo "interface" mas encontrado "$1"
-type_w_mixed_signed_unsigned=04035_W_Misturar expressoes com sinal e "longword" gera resultado de 64 bits
-% If you divide (or calculate the modulus of) a signed expression by a longword (or vice versa),
-% or if you have overflow and/or range checking turned on and use an arithmetic
-% expression (+, -, *, div, mod) in which both signed numbers and longwords appear,
-% then everything has to be evaluated in 64bit which is slower than normal
-% 32bit arithmetic. You can avoid this by typecasting one operand so it
-% matches the result type of the other one.
-type_w_mixed_signed_unsigned2=04036_W_Misturar expressoes com sinal e "cardinals" neste ponto pode causar "range check error"
-% If you use a binary operator (and, or, xor) and one of
-% the operands is a longword while the other one is a signed expression, then,
-% if range checking is turned on, you may get a range check error because in
-% such a case both operands are converted to longword before the operation is
-% carried out. You can avoid this by typecasting one operand so it
-% matches the result type of the other one.
-type_e_typecast_wrong_size_for_assignment=04037_E_Variavel que sofreu typecast ficou com tamanho diferente ($1 -> $2)
-% Type casting to a type with a different size is not allowed when the variable is
-% used for assigning.
-type_e_array_index_enums_with_assign_not_possible=04038_E_Membro de "enumerated" que contenha atribuicoes, nao pode ser usado como indice de array
-% When you declared an enumeration type which has assignments in it, as in C,
-% like in the following:
-% \begin{verbatim}
-%   Tenum = (a,b,e:=5);
-% \end{verbatim}
-% you cannot use it as index of an array.
-type_e_classes_not_related=04039_E_Classes ou "objects" de tipos "$1" and "$2" nao estao relacionados(os tipos)
-% There is a typecast from one class or object to another while the class/object
-% are not related. This will probably lead to errors
-type_w_classes_not_related=04040_W_Classes "types" "$1" e "$2" nao estao relacionados
-% There is a typecast from one class or object to another while the class/object
-% are not related. This will probably lead to errors
-type_e_class_or_interface_type_expected=04041_E_Esperada uma classe ou um interface mas encontrado "$1"
-type_e_type_is_not_completly_defined=04042_E_O "type" "$1" nao esta completamente definido
-type_w_string_too_long=04043_W_Literal tem mais caracteres que o tamanho de "short string"
-% The size of the constant string, which is assigned to a shortstring,
-% is longer than the maximum size of the shortstring
-type_w_signed_unsigned_always_false=04044_W_Comparacao sera sempre falsa devido ao "range" de valores
-% There is a comparison between an unsigned value and a signed constant which is
-% less than zero. Because of type promotion, the statement will always evaluate to
-% false. Exlicitly typecast the constant to the correct range to avoid this problem.
-type_w_signed_unsigned_always_true=04045_W_Comparacao sera sempre verdadeira devido ao "range" de valores
-% There is a comparison between an unsigned value and a signed constant which is
-% less than zero. Because of type promotion, the statement will always evaluate to
-% true. Exlicitly typecast the constant to the correct range to avoid this problem.
-type_w_instance_with_abstract=04046_W_Construindo classe "$1" mas superclasse tem metodos virtuais que nao sofreram override
-% An instance of a class is created which contains non-implemented abstract
-% methods. This will probably lead to a runtime error 211 in the code if that
-% routine is ever called. All abstract methods should be overriden.
-type_h_in_range_check=04047_H_Operando a esquerada de um operador IN tem que ter tamanho de 1 byte
-% The left operand of the \var{in} operator is not an ordinal or enumeration which fits
-% within 8-bits, this may lead to range check errors. The \var{in} operator
-% currently only supports a left operand which fits within a byte. In the case of
-% enumerations, the size of an element of an enumeration can be controlled with
-% the \var{\{\$PACKENUM\}} or \var{\{\$Zn\}} switches.
-type_w_smaller_possible_range_check=04048_W_"Types" de tamanho diferente, havera possivel perda de dados e/ou "range check error"
-% There is an assignment to a smaller type than the source type. This means that
-% this may cause a range-check error, or may lead to possible loss of data.
-type_h_smaller_possible_range_check=04049_H_Tamanho dos types nao combina, possivel perda de dados ou erro de "range"
-% There is an assignment to a smaller type than the source type. This means that
-% this may cause a range-check error, or may lead to possible loss of data.
-type_e_cant_take_address_of_abstract_method=04050_E_Nao foi possivel obter o endereco de 1 metodo abstrato
-% An abstract method has no body, so the address of an abstract method can't be taken.
-type_e_operator_not_allowed=04051_E_O operador nao se aplica ao tipo de operando
-% You are trying an operator that is not available for the type of the
-% operands
-type_e_constant_expr_expected=04052_E_Esperada expressao do tipo constante
-% The compiler expects an constant expression, but gets a variable expression.
-type_e_operator_not_supported_for_types=04053_E_Operacao "$1" nao permitida para os tipos "$2" and "$3"
-% The operation is not allowed for the supplied types
-type_e_illegal_type_conversion=04054_E_Conversao ilegal de tipos: "$1" para "$2"
-% When doing a type-cast, you must take care that the sizes of the variable and
-% the destination type are the same.
-type_h_pointer_to_longint_conv_not_portable=04055_H_Conversao entre "ordinals" e "pointer" nao e portavel
-% If you typecast a pointer to a longint (or vice-versa), this code will not compile
-% on a machine using 64-bit for pointer storage.
-type_w_pointer_to_longint_conv_not_portable=04056_W_Conversao entre "ordinals" e "pointer" nao e portavel
-% If you typecast a pointer to a ordinal type of a different size (or vice-versa), this can
-% cause problems. This is a warning to help finding the 32bit specific code where cardinal/longint is used
-% to typecast pointers to ordinals. A solution is to use the ptrint/ptruint types instead.
-type_e_cant_choose_overload_function=04057_E_Nao foi possivel determinar qual das functions que sofreram overload deve ser chamada
-% You're calling overloaded functions with a parameter that doesn't correspond
-% to any of the declared function parameter lists. e.g. when you have declared
-% a function with parameters \var{word} and \var{longint}, and then you call
-% it with a parameter which is of type \var{integer}.
-type_e_illegal_count_var=04058_E_Variavel usada como contador e de tipo invalido
-% The type of a \var{for} loop variable must be an ordinal type.
-% Loop variables cannot be reals or strings.
-type_w_double_c_varargs=04059_W_Convertendo constante tipo real p/tipo double p/ser usada como variavel de C, adicione typecast explicito p/evitar isto
-% In C, constant real values are double by default. For this reason, if you
-% pass a constant real value to a variable argument part of a C function, FPC
-% by default converts this constant to double as well. If you want to prevent
-% this from happening, add an explicit typecast around the constant.
-type_e_class_or_cominterface_type_expected=04060_E_Esperada classe ou interface tipo COM, mas encontrado "$1"
-% Some operators like the AS operator are only appliable to classes or COM interfaces.
-% \end{description}
-#
-# Symtable
-#
-# 05055 is the last used one
-#
-% \section{Symbol handling}
-% This section lists all the messages that concern the handling of symbols.
-% This means all things that have to do with procedure and variable names.
-% \begin{description}
-sym_e_id_not_found=05000_E_Identificador nao encontrado "$1"
-% The compiler doesn't know this symbol. Usually happens when you misspel
-% the name of a variable or procedure, or when you forgot to declare a
-% variable.
-sym_f_internal_error_in_symtablestack=05001_F_Erro interno no SymTableStack()
-% An internal error occurred in the compiler; If you encounter such an error,
-% please contact the developers and try to provide an exact description of
-% the circumstances in which the error occurs.
-sym_e_duplicate_id=05002_E_Identificador duplicado "$1"
-% The identifier was already declared in the current scope.
-sym_h_duplicate_id_where=05003_H_Identificador ja definido em $1 na linha $2
-% The identifier was already declared in a previous scope.
-sym_e_unknown_id=05004_E_Identificador desconhecido "$1"
-% The identifier encountered has not been declared, or is used outside the
-% scope where it is defined.
-sym_e_forward_not_resolved=05005_E_Declaracao "forward" nao resolvida "$1"
-% This can happen in two cases:
-% \begin{itemize}
-% \item This happens when you declare a function (in the \var{interface} part, or
-% with a \var{forward} directive, but do not implement it.
-% \item You reference a type which isn't declared in the current \var{type}
-% block.
-% \end{itemize}
-sym_e_error_in_type_def=05007_E_Erro na definicao de um "type"
-% There is an error in your definition of a new array type:
-% \item One of the range delimiters in an array declaration is erroneous.
-% For example, \var{Array [1..1.25]} will trigger this error.
-sym_e_forward_type_not_resolved=05009_E_"Forward type" "$1" nao resolvido
-% A symbol was forward defined, but no declaration was encountered.
-sym_e_only_static_in_static=05010_E_Apenas variaveis "static" podem ser usadas em metodos "static" ou metodos externos ao bloco
-% A static method of an object can only access static variables.
-sym_f_type_must_be_rec_or_class=05012_F_Esperado um record ou uma classe
-% The variable or expression isn't of the type \var{record} or \var{class}.
-sym_e_no_instance_of_abstract_object=05013_E_Nao e permitido instanciar classes ou objetos atraves de metodos abstratos
-% You are trying to generate an instance of a class which has an abstract
-% method that wasn't overridden.
-sym_w_label_not_defined=05014_W_"Label" nao definido "$1"
-% A label was declared, but not defined.
-sym_e_label_used_and_not_defined=05015_E_"Label" usado mas nao definido "$1"
-% A label was declared and used, but not defined.
-sym_e_ill_label_decl=05016_E_Declaracao de label invalida
-% This error should never happen; it occurs if a label is defined outside a
-% procedure or function.
-sym_e_goto_and_label_not_supported=05017_E_GOTO e LABEL nao suportados (use a diretiva -Sg)
-% You must compile a program which has \var{label}s and \var{goto} statements
-% with the \var{-Sg} switch. By default, \var{label} and \var{goto} aren't
-% supported.
-sym_e_label_not_found=05018_E_Label nao encontrado
-% A \var{goto label} was encountered, but the label isn't declared.
-sym_e_id_is_no_label_id=05019_E_Identificador nao e um label
-% The identifier specified after the \var{goto} isn't of type label.
-sym_e_label_already_defined=05020_E_Label ja definido
-% You are defining a label twice. You can define a label only once.
-sym_e_ill_type_decl_set=05021_E_Type invalido na declaracao dos elementos de um set
-% The declaration of a set contains an invalid type definition.
-sym_e_class_forward_not_resolved=05022_E_Definicao da classe citada num "forward" nao resolvida "$1"
-% You declared a class, but you did not implement it.
-sym_n_unit_not_used=05023_H_"Unit" "$1" nao usada em $2
-% The unit referenced in the \var{uses} clause is not used.
-sym_h_para_identifier_not_used=05024_H_Identificador "$1" nao usado
-% The identifier was declared (locally or globally) but
-% was not used (locally or globally).
-sym_n_local_identifier_not_used=05025_N_Variavel local "$1" nao usada
-% You have declared, but not used a variable in a procedure or function
-% implementation.
-sym_h_para_identifier_only_set=05026_H_Identificador "$1" declarado com valor mas nunca usado
-% The identifier was declared (locally or globally)
-% set but not used (locally or globally).
-sym_n_local_identifier_only_set=05027_N_Variavel local "$1" e declarada/inicializada mas nunca usada
-% The variable in a procedure or function
-% implementation is declared, set but never used.
-sym_h_local_symbol_not_used=05028_H_Simbolo local $1 "$2" nao e usado
-% A local symbol is never used.
-sym_n_private_identifier_not_used=05029_N_Campo "private" "$1.$2" nunca e usado
-sym_n_private_identifier_only_set=05030_N_Campo "private" "$1.$2" e inicializado mas nunca usado
-sym_n_private_method_not_used=05031_N_Metodo "private" "$1.$2" nunca usado
-sym_e_set_expected=05032_E_Esperado tipo "set"
-% The variable or expression is not of type \var{set}. This happens in an
-% \var{in} statement.
-sym_w_function_result_not_set=05033_W_Resultado de uma function parece nao ter sido atribuido
-% You can get this warning if the compiler thinks that a function return
-% value is not set. This will not be displayed for assembler procedures,
-% or procedures that contain assembler blocks.
-sym_w_wrong_C_pack=05034_W_Type "$1" parece nao estar alinhado corretamente no registro corrente para em estruturas C
-% Arrays with sizes not multiples of 4 will be wrongly aligned
-% for C structures.
-sym_e_illegal_field=05035_E_Campo de "record" desconhecido "$1"
-% The field doesn't exist in the record/object definition.
-sym_w_uninitialized_local_variable=05036_W_Variavel local "$1" parece nao ter sido inicializada
-% This message is displayed if the compiler thinks that a variable will
-% be used (i.e. appears in the right-hand-side of an expression) when it
-% was not initialized first (i.e. appeared in the left-hand side of an
-% assigment)
-sym_w_uninitialized_variable=05037_W_Variavel "$1" nao parece ter sido inicializada
-% This message is displayed if the compiler thinks that a variable will
-% be used (i.e. appears in the right-hand-side of an expression) when it
-% was not initialized first (i.e. appeared in the left-hand side of an
-% assigment)
-sym_e_id_no_member=05038_E_Identificador nao identifica nenhum dado ou metodo "$1"
-% This error is generated when an identifier of a record,
-% field, or method is accessed while it is not defined.
-sym_h_param_list=05039_H_Declaracao encontrada mas procedure que sofre o overload nao: $1
-% You get this when you use the \var{-vh} switch. In case an overloaded
-% procedure is not found, then all candidate overloaded procedures are
-% listed, with their parameter lists.
-sym_e_segment_too_large=05040_E_Elemento de dados muito grande
-% You get this when you declare a data element whose size exceeds the
-% prescribed limit (2 Gb on 80386+/68020+ processors)
-sym_e_no_matching_implementation_found=05042_E_Nao encontrada implementacao de metodo para a interface "$1"
-% There was no matching method found which could implement the interface
-% method. Check argument types and result type of the methods.
-sym_w_deprecated_symbol=05043_W_Symbol "$1" esta obsoleto(a)
-% This means that a symbol (a variable, routine, etc...) which is
-% declared as \var{deprecated} is used. Deprecated symbols may no longer
-% be available in newer versions of the unit / library. Usage of this symbol
-% should be avoided as much as possible.
-sym_w_non_portable_symbol=05044_W_Simbolo "$1" nao e portavel
-% This means that a symbol (a variable, routine, etc...) which is
-% declared as \var{platform} is used. This symbol's value, usage
-% and availability is platform specific and should not be used
-% if the source code must be portable.
-sym_w_non_implemented_symbol=05055_W_Simbolo "$1" nao esta implementado
-% This means that a symbol (a variable, routine, etc...) which is
-% declared as \var{unimplemented} is used. This symbol is defined,
-% but is not yet implemented on this specific platform.
-sym_e_cant_create_unique_type=05056_E_Nao e possivel criar 1 "type" que seja unico a partir deste "type"
-% Only simple types like ordinal, float and string types are supported when
-% redefining a type with \var{type newtype = type oldtype;}.
-sym_h_uninitialized_local_variable=05057_H_Variavel local "$1" nao parece ter sido inicializada
-% This message is displayed if the compiler thinks that a variable will
-% be used (i.e. appears in the right-hand-side of an expression) when it
-% was not initialized first (i.e. appeared in the left-hand side of an
-% assigment)
-sym_h_uninitialized_variable=05058_H_Variavel "$1" nao parece ter sido inicializada
-% This message is displayed if the compiler thinks that a variable will
-% be used (i.e. appears in the right-hand-side of an expression) when it
-% was not initialized first (i.e. appeared in the left-hand side of an
-% assigment)
-sym_w_function_result_uninitialized=05059_W_Variavel resultado de uma function nao parece estar sendo inicializada
-% This message is displayed if the compiler thinks that the function result
-% variable will be used (i.e. appears in the right-hand-side of an expression)
-% before it is initialized (i.e. appeared in the left-hand side of an
-% assigment)
-sym_h_function_result_uninitialized=05060_H_Variavel resultado de uma function nao parece estar sendo inicializada
-% This message is displayed if the compiler thinks that the function result
-% variable will be used (i.e. appears in the right-hand-side of an expression)
-% before it is initialized (i.e. appeared in the left-hand side of an
-% assigment)
-sym_w_identifier_only_read=05061_W_Variavel "$1" usada em um read mas nao sofre assinalamento em lugar algum
-% You have read the value of a variable, but nowhere assigned a value to
-% it.
-
-% \end{description}
-#
-# Codegenerator
-#
-# 06040 is the last used one
-#
-% \section{Code generator messages}
-% This section lists all messages that can be displayed if the code
-% generator encounters an error condition.
-% \begin{description}
-cg_e_parasize_too_big=06009_E_Lista de parametros excede 65535 bytes
-% The I386 processor limits the parameter list to 65535 bytes (the \var{RET}
-% instruction causes this)
-cg_e_file_must_call_by_reference=06012_E_"File types" devem ser variaveis
-% You cannot specify files as value parameters, i.e. they must always be
-% declared \var{var} parameters.
-cg_e_cant_use_far_pointer_there=06013_E_O uso de pointer tipo "far" nao e permitido
-% Free Pascal doesn't support far pointers, so you cannot take the address of
-% an expression which has a far reference as a result. The \var{mem} construct
-% has a far reference as a result, so the following code will produce this
-% error:
-% \begin{verbatim}
-% var p : pointer;
-% ...
-% p:=@mem[a000:000];
-% \end{verbatim}
-cg_e_dont_call_exported_direct=06015_E_Functions declaradas EXPORT nao podem ser chamadas
-% No longer in use.
-cg_w_member_cd_call_from_method=06016_W_Possivel chamada invalida a constructor ou destructor
-% The compiler detected that a constructor or destructor is called within a
-% a method. This will probably lead to problems, since constructors / destructors
-% require parameters on entry.
-cg_n_inefficient_code=06017_N_Codigo pouco eficiente
-% Your statement seems dubious to the compiler.
-cg_w_unreachable_code=06018_W_Codigo nunca sera executado
-% You specified a construct which will never be executed. Example:
-% \begin{verbatim}
-% while false do
-%   begin
-%   {.. code ...}
-%   end;
-% \end{verbatim}
-cg_e_cant_call_abstract_method=06020_E_Metodos abstratos nao podem ser chamadaos diretamente
-% You cannot call an abstract method directy, instead you must call a
-% overriding child method, because an abstract method isn't implemented.
-cg_d_register_weight=06027_DL_Registrador $1 tem prioridade sobre $2 $3
-% Debugging message. Shown when the compiler considers a variable for
-% keeping in the registers.
-cg_d_stackframe_omited=06029_DL_"Stack frame" omitido
-% Some procedure/functions do not need a complete stack-frame, so it is omitted.
-% This message will be displayed when the {-vd} switch is used.
-cg_e_unable_inline_object_methods=06031_E_Objetos ou metodos nao podem ser inline.
-% You cannot have inlined object methods.
-cg_e_unable_inline_procvar=06032_E_Call a variaveis do tipo procedure nao podem ser inline
-% A procedure with a procedural variable call cannot be inlined.
-cg_e_no_code_for_inline_stored=06033_E_Nenhum codigo foi carregado para a procedure inline
-% The compiler couldn't store code for the inline procedure.
-cg_e_can_access_element_zero=06035_E_O elemento zero de 1 ansi/wide- ou longstring nao pode ser acessado, use SetLength
-% You should use \var{setlength} to set the length of an ansi/wide/longstring
-% and \var{length} to get the length of such a string types
-cg_e_cannot_call_cons_dest_inside_with=06037_E_Constructors ou destructors nao podem ser chamados de dentro de 1 clausula 'with'
-% Inside a \var{with} clause you cannot call a constructor or destructor for the
-% object you have in the \var{with} clause.
-cg_e_cannot_call_message_direct=06038_E_Nao e possivel acessar diretamente metodos do tipo "message handler"(declarados com diretiva message)
-% A message method handler method cannot be called directly if it contains an
-% explicit self argument
-cg_e_goto_inout_of_exception_block=06039_E_Pulo para dentro ou para fora de 1 "exception block"
-% It is not allowed to jump in or outside of an exception block like \var{try..finally..end;}:
-% \begin{verbatim}
-% label 1;
-%
-% ...
-%
-% try
-%    if not(final) then
-%      goto 1;   // this line will cause an error
-% finally
-%   ...
-% end;
-% 1:
-% ...
-% \end{verbatim}
-cg_e_control_flow_outside_finally=06040_E_Comandos de controle de fluxo de execucao nao sao permitidos dentro de blocos "finally"
-% It isn't allowed to use the control flow statements \var{break},
-% \var{continue} and \var{exit}
-% inside a finally statement. The following example shows the problem:
-% \begin{verbatim}
-% ...
-%   try
-%      p;
-%   finally
-%      ...
-%      exit;  // This exit ISN'T allowed
-%   end;
-% ...
-%
-% \end{verbatim}
-% If the procedure \var{p} raises an exception the finally block is
-% executed. If the execution reaches the exit, it's unclear what to do:
-% exiting the procedure or searching for another exception handler
-cg_w_parasize_too_big=06041_W_Tamanho total dos parametros excede o limite de alguns processadores
-% This indicates that you are declaring more than 64K of parameters, which
-% might not be supported on other processor targets.
-cg_w_localsize_too_big=06042_W_O tamanho total das variaveis locais excede o limite de alguns processadores
-% This indicates that you are declaring more than 32K of local variables, which
-% might not be supported on other processor targets.
-cg_e_localsize_too_big=06043_E_O tamanho das variaveis locais excede o limite suportado
-% This indicates that you are declaring more than 32K of local variables, which
-% is not supported by this processor.
-cg_e_break_not_allowed=06044_E_BREAK nao permitido neste ponto
-% You're trying to use \var{break} outside a loop construction.
-cg_e_continue_not_allowed=06045_E_CONTINUE nao permitido neste ponto
-% You're trying to use \var{continue} outside a loop construction.
-cg_f_unknown_compilerproc=06046_F_Procedure de compilador "$1" invalida. Verifique se usou a library de run time correta
-% The compiler expects that the runtime library contains some subrountines. If you see this error
-% and you didn't mess with the runtime library, it's very likely that the runtime library
-% you're using doesn't match the used compiler. If you changed the runtime library this error means
-% that you removed a subroutine which the compiler needs for internal use.
-% \end{description}
-# EndOfTeX
-
-#
-# Assembler reader
-#
-# 07097 is the last used one
-#
-asmr_d_start_reading=07000_DL_Iniciando a montagem do bloco assembly $1
-% This informs you that an assembler block is being parsed
-asmr_d_finish_reading=07001_DL_Montagem do bloco assembly $1 finalizada
-% This informs you that an assembler block has finished.
-asmr_e_none_label_contain_at=07002_E_Encontrado o caracter @ em identificador que nao e label
-% A identifier which isn't a label can't contain a @.
-asmr_e_building_record_offset=07004_E_Erro durante a apuracao de um deslocamento(offset)
-% There has an error occured while building the offset of a record/object
-% structure, this can happend when there is no field specified at all or
-% an unknown field identifier is used.
-asmr_e_offset_without_identifier=07005_E_Deslocamento(OFFSET) usado sem um identificador
-% You can only use OFFSET with an identifier. Other syntaxes aren't
-% supported
-asmr_e_type_without_identifier=07006_E_"TYPE" usado sem identificador
-% You can only use TYPE with an identifier. Other syntaxes aren't
-% supported
-asmr_e_no_local_or_para_allowed=07007_E_Nao pode usar variavel local ou parametros aqui
-% You can't use a local variable or parameter here, mostly because the
-% addressing of locals and parameters is done using the frame pointer register so the
-% address can't be obtained directly.
-asmr_e_need_offset=07008_E_E necessario o uso do operador OFFSET aqui
-% You need to use OFFSET <id> here to get the address of the identifier.
-asmr_e_need_dollar=07009_E_Precisa usar $ aqui
-% You need to use $<id> here to get the address of the identifier.
-asmr_e_cant_have_multiple_relocatable_symbols=07010_E_Nao pode usar multiplos simbolos relocaveis
-% You can't have more than one relocatable symbol (variable/typed constant)
-% in one argument.
-asmr_e_only_add_relocatable_symbol=07011_E_Simbolo relocavel so pode ser usado para adicao
-% Relocatable symbols (variable/typed constant) can't be used with other
-% operators. Only addition is allowed.
-asmr_e_invalid_constant_expression=07012_E_Expressao constante invalida
-% There is an error in the constant expression.
-asmr_e_relocatable_symbol_not_allowed=07013_E_Simbolo relocavel nao permitido aqui
-% You can't use a relocatable symbol (variable/typed constant) here.
-asmr_e_invalid_reference_syntax=07014_E_Erro de sintaxe
-% There is an error in the reference.
-asmr_e_local_para_unreachable=07015_E_Nao permitido acionar $1 a partir deste codigo
-% You can not read directly the value of a local variable or parameter
-% of a higher level procedure in assembler code (except for
-% local assembler code without parameter nor locals).
-asmr_e_local_label_not_allowed_as_ref=07016_E_Simbolos e labels locais nao sao permitidos como referencias
-% You can't use local symbols/labels as references
-asmr_e_wrong_base_index=07017_E_Uso invalido de registradores base e indexador
-% There is an error with the base and index register, they are
-% probably incorrect
-asmr_w_possible_object_field_bug=07018_W_Possivel erro no manuseio de algum campo de objeto
-% Fields of objects or classes can be reached directly in normal or objfpc
-% modes but TP and Delphi modes treat the field name as a simple offset.
-asmr_e_wrong_scale_factor=07019_E_Especificado fator de escala errado
-% The scale factor given is wrong, only 1,2,4 and 8 are allowed
-asmr_e_multiple_index=07020_E_Uso de multiplos registradores indexadores
-% You are trying to use more than one index register
-asmr_e_invalid_operand_type=07021_E_Tipo de operando invalido
-% The operand type doesn't match with the opcode used
-asmr_e_invalid_string_as_opcode_operand=07022_E_Opcode invalido: $1
-% The string specified as operand is not correct with this opcode
-asmr_w_CODE_and_DATA_not_supported=07023_W_@CODE e @DATA nao suportados
-% @CODE and @DATA are unsupported and are ignored.
-asmr_e_null_label_ref_not_allowed=07024_E_Null label references nao permitidas
-asmr_e_expr_zero_divide=07025_E_Divisao por zero no analisador do assembler
-% There is a division by zero in a constant expression
-asmr_e_expr_illegal=07026_E_Expressao ilegal
-% There is an illegal expression in a constant expression
-asmr_e_escape_seq_ignored=07027_E_Sequencia de escape ignorada: $1
-% There is a C-styled string, but the escape sequence in the string
-% is unknown, and is therefore ignored
-asmr_e_invalid_symbol_ref=07028_E_Referencia a simbolo invalida
-asmr_w_fwait_emu_prob=07029_W_Fwait pode causar problemas de emulacao com emu387
-asmr_w_fadd_to_faddp=07030_W_$1 sem operandos traduzida para $1P
-asmr_w_enter_not_supported_by_linux=07031_W_Instrucao ENTER nao e suportada pelo kernel do Linux
-% ENTER instruction can generate a stack page fault that is not
-% caught correctly by the i386 Linux page handler.
-asmr_w_calling_overload_func=07032_W_Chamada em assembly a 1 metodo que sofreu overload
-% There is a call to an overloaded method in the assembler block,
-% this might be the sign there is a problem
-asmr_e_unsupported_symbol_type=07033_E_Simbolo de "type" nao suportado para operando
-asmr_e_constant_out_of_bounds=07034_E_Constante fora da faixa
-asmr_e_error_converting_decimal=07035_E_Erro convertendo decimal $1
-% A constant decimal value does not have the correct syntax
-asmr_e_error_converting_octal=07036_E_Erro convertendo octal $1
-% A constant octal value does not have the correct syntax
-asmr_e_error_converting_binary=07037_E_Erro convertendo binario $1
-% A constant binary value does not have the correct syntax
-asmr_e_error_converting_hexadecimal=07038_E_Error convertendo hexadecimal $1
-% A constant hexadecimal value does not have the correct syntax
-asmr_h_direct_global_to_mangled=07039_H_$1 traduzido para $2
-asmr_w_direct_global_is_overloaded_func=07040_W_$1 esta associado a uma function que sofreu overload
-asmr_e_cannot_use_SELF_outside_a_method=07041_E_Nao pode usar SELF fora de um metodo
-% There is a reference to the \var{self} symbol while it is not
-% allowed. \var{self} can only be referenced inside methods
-asmr_e_cannot_use_OLDEBP_outside_nested_procedure=07042_E_Nao pode usar OLDEBP fora de uma procedure aninhada
-% There is a reference to the \var{oldebp} symbol while it is not
-% allowed. \var{oldebp} can only be referenced inside nested routines
-asmr_e_void_function=07043_W_Procedures nao podem retornar nenhum valor no codigo assembly
-% Trying to return a value while in a procedure. A procedure
-% does not have any return value
-asmr_e_SEG_not_supported=07044_E_SEG nao suportado
-asmr_e_size_suffix_and_dest_dont_match=07045_E_Sufixo de tamanho e o destino ou tamanho da origem nao combinam
-% The register size and the opcode size suffix don't match. This is
-% probably an error in the assembler statement
-asmr_w_size_suffix_and_dest_dont_match=07046_W_Tamanho do "suffix" e o tamanho do destino ou da origem nao combinam
-% The register size and the opcode size suffix don't match. This is
-% probably an error in the assembler statement
-asmr_e_syntax_error=07047_E_Erro de sintaxe assembly
-% There is an assembler syntax error
-asmr_e_invalid_opcode_and_operand=07048_E_Combinacao de opcode e operandos invalida
-% The opcode cannot be used with this type of operand
-asmr_e_syn_operand=07049_E_Erro de sintaxe assembly em operando
-asmr_e_syn_constant=07050_E_Erro de sintaxe assembly em constante
-asmr_e_invalid_string_expression=07051_E_Expressao string invalida
-asmr_w_const32bit_for_address=07052_W_Constante com simbolo $1 para endereco que nao esta numa pointer
-% A constant expression represents an address which does not fit
-% into a pointer. The address is probably incorrect
-asmr_e_unknown_opcode=07053_E_Opcode nao reconhecido $1
-% This opcode is not known
-asmr_e_invalid_or_missing_opcode=07054_E_Opcode invalido ou ausente
-asmr_e_invalid_prefix_and_opcode=07055_E_Combinacao de opcode e prefixo invalida: $1
-asmr_e_invalid_override_and_opcode=07056_E_Combinacao invalida de opcode e override: $1
-asmr_e_too_many_operands=07057_E_Operandos em excesso numa linha
-% There are too many operands for this opcode. Check your
-% assembler syntax
-asmr_w_near_ignored=07058_W_NEAR ignorado
-asmr_w_far_ignored=07059_W_FAR ignorado
-asmr_e_dup_local_sym=07060_E_Simbolo local duplicado $1
-asmr_e_unknown_local_sym=07061_E_Simbolo local nao definido $1
-asmr_e_unknown_label_identifier=07062_E_Label desconhecido $1
-asmr_e_invalid_register=07063_E_Nome de registrador invalido
-% There is an unknown register name used as operand.
-asmr_e_invalid_fpu_register=07064_E_Nome de registrador de ponto flutuante invalido
-% There is an unknown register name used as operand.
-asmr_w_modulo_not_supported=07066_W_Funcao "mod"(resto) nao suportada
-asmr_e_invalid_float_const=07067_E_Constante de ponto flutuante invalida $1
-% The floating point constant declared in an assembler block is
-% invalid.
-asmr_e_invalid_float_expr=07068_E_Expressao de ponto flutuante invalida
-% The floating point expression declared in an assembler block is
-% invalid.
-asmr_e_wrong_sym_type=07069_E_Simbolo de tipo invalido
-asmr_e_cannot_index_relative_var=07070_E_Nao pode indexar com registrador uma variavel local ou parametro(que ja sao relativos a 1 reg. base)
-% Trying to index using a base register a symbol which is already relative
-% to a register. This is not possible, and will probably lead to crashes.
-asmr_e_invalid_seg_override=07071_E_Expressao com override invalido de segmento
-asmr_w_id_supposed_external=07072_W_Identificador $1 assumido como external
-% There is a reference to an undefined symbol. This will not result
-% in an error, since the symbol might be external, but may cause
-% problems at link time if the symbol is not defined anywhere.
-asmr_e_string_not_allowed_as_const=07073_E_Strings nao permitidos como constantes
-% Character strings are not allowed as constants.
-asmr_e_no_var_type_specified=07074_Nenhum tipo de variavel especificado
-% The syntax expects a type idenfitifer after the dot, but
-% none was found.
-asmr_w_assembler_code_not_returned_to_text=07075_E_O codigo assembly nao gera retorno a secao de texto
-% There was a directive in the assembler block to change sections,
-% but there is a missing return to the text section at the end
-% of the assembler block. This might cause errors during link time.
-asmr_e_not_directive_or_local_symbol=07076_E_Nao e uma diretiva nem um simbolo local $1
-% This symbol is unknown.
-asmr_w_using_defined_as_local=07077_E_Usando um nome auto-definido como label local
-asmr_e_dollar_without_identifier=07078_E_Um simbolo "$" usado sem estar no inicio de 1 identificador
-% A constant expression has an identifier which does not start with
-% the $ symbol.
-asmr_w_32bit_const_for_address=07079_W_Criada uma constante de 32 bits para enderecamento
-% A constant was used as an address. This is probably an error,
-% since using absolute addresses will probably not work.
-asmr_n_align_is_target_specific=07080_N_.align e especifico de plataforma, use .balign ou .p2align
-% Using the .align directive is platform specific, and its meaning will vary
-% from one platform to another.
-asmr_e_cannot_access_field_directly_for_parameters=07081_E_Nao pode acessar diretamente os campos de parametros
-% You should load the parameter first into a register and then access the
-% fields using that register.
-asmr_e_cannot_access_object_field_directly=07082_E_Nao pode acessar diretamente campos de objetos/classes
-% You should load the self pointer first into a register and then access the
-% fields using the register as base. By default the self pointer is available
-% in the esi register on i386.
-asmr_e_unable_to_determine_reference_size=07083_E_Nao especificado tamanho e nao foi possivel determinar o tamanho dos operandos
-% You should specify explicitly a size for the reference, because
-% the compiler is unable to determine what size (byte,word,dword,etc.) it
-% should use for the reference.
-asmr_e_cannot_use_RESULT_here=07084_E_Nao pode usar RESULT nesta function
-% Some functions which return complex types cannot use the \var{result}
-% keyword.
-asmr_w_adding_explicit_args_fXX=07086_W_"$1" sem operando traduzido para "$1 %st,%st(1)"
-asmr_w_adding_explicit_first_arg_fXX=07087_W_"$1 %st(n)" traduzido para "$1 %st,%st(n)"
-asmr_w_adding_explicit_second_arg_fXX=07088_W_"$1 %st(n)" traduzido para "$1 %st(n),%st"
-asmr_e_invalid_char_smaller=07089_E_O caracter < nao e permitido aqui
-% The shift operator requires the << characters. Only one
-% of those characters was found.
-asmr_e_invalid_char_greater=07090_E_O caracter > nao e permitido aqui
-% The shift operator requires the >> characters. Only one
-% of those characters was found.
-asmr_w_align_not_supported=07093_W_ALIGN nao suportado
-asmr_e_no_inc_and_dec_together=07094_E_"Inc" e "Dec" nao podem estar juntos
-% Trying to use an increment and a decrement within the same
-% opcode on the 680x0. This is impossible.
-asmr_e_invalid_reg_list_in_movem=07095_E_Registrador(es) invalido(s) para "movem"
-% Trying to use the \var{movem} opcode with invalid registers
-% to save or restore.
-asmr_e_invalid_reg_list_for_opcode=07096_E_Registrador(es) invalidos para o opcode
-asmr_e_higher_cpu_mode_required=07097_E_Requerido modo de CPU mais avancado ($1)
-% Trying to use an instruction which is not supported in the current
-% cpu mode. Use a higher cpu generation to be able to use this
-% opcode in your assembler block
-asmr_w_unable_to_determine_reference_size_using_dword=07098_W_Nao foi especificado tamanho e nao e possivel determinar o tamanho dos operandos, DWORD usado como default
-% You should specify explicitly a size for the reference, because
-% the compiler is unable to determine what size (byte,word,dword,etc.) it
-% should use for the reference. This warning is only used in Delphi mode where
-% it falls back to use DWORD as default.
-asmr_e_illegal_shifterop_syntax=07099_E_Erro de sintaxe enquanto tentava montar uma operacao de "shift"
-% ARM only; ARM assembler supports a so called shifter operand. The used syntax isn't
-% a valid shifter operand. Example for an operation with shifter operand:
-% \begin{verbatim}
-% asm
-%   orr     r2,r2,r2,lsl #8
-% end;
-% \end{verbatim}
-#
-# Assembler/binary writers
-#
-# 08018 is the last used one
-#
-asmw_f_too_many_asm_files=08000_F_Excesso de arquivos assembly
-% With smartlinking enabled, there are too many assembler
-% files generated. Disable smartlinking.
-asmw_f_assembler_output_not_supported=08001_F_Tipo de saida do assembler nao suportado
-asmw_f_comp_not_supported=08002_F_"Comp" nao suportado
-asmw_f_direct_not_supported=08003_F_"Direct" nao suportado para "binary writers"
-% Direct assembler mode is not supported for binary writers.
-asmw_e_alloc_data_only_in_bss=08004_E_Alocacao de dados so e permitida na secao bss
-asmw_f_no_binary_writer_selected=08005_F_Nenhum "binary writer" selecionado
-asmw_e_opcode_not_in_table=08006_E_Assembler: Opcode $1 nao existe na tabela
-asmw_e_invalid_opcode_and_operands=08007_E_Asssmbler: $1 combinacao de opcode e operadores invalida
-asmw_e_16bit_not_supported=08008_E_Assembler: Referencias de 16 bits nao suportadas
-asmw_e_invalid_effective_address=08009_E_Assembler: Endereco efetivo invalido
-asmw_e_immediate_or_reference_expected=08010_E_Assembler: Esperados um operador imediato ou uma referencia
-asmw_e_value_exceeds_bounds=08011_E_Assembler: Valor de $1 excede os limites de $2
-asmw_e_short_jmp_out_of_range=08012_E_Assembler: "Short jump" fora de faixa $1("short jump" gera troca de segmento de memoria?)
-asmw_e_undefined_label=08013_E_Assembler: Label indefinido $1
-asmw_e_comp_not_supported=08014_E_Assembler: Type "Comp" nao suportado na plataforma destino
-asmw_e_extended_not_supported=08015_E_Assembler: "Type" Extended nao suportado na plataforma destino
-asmw_e_duplicate_label=08016_E_Assembler: Label duplicado $1
-asmw_e_redefined_label=08017_E_Assembler: Label redefinido $1
-asmw_e_first_defined_label=08018_E_Assembler: Definido a primeira vez aqui
-asmw_e_invalid_register=08019_E_Assembler: Registrador invalido $1
-asmw_e_16bit_32bit_not_supported=08020_E_Asm: Referencias em 16 e 32 bits nao suportadas
-asmw_e_64bit_not_supported=08021_E_Asm: Operandos de 64 bits nao suportados
-
-#
-# Executing linker/assembler
-#
-# 09034 is the last used one
-#
-# BeginOfTeX
-%
-% \section{Errors of assembling/linking stage}
-% This section lists errors that occur when the compiler is processing the
-% command line or handling the configuration files.
-% \begin{description}
-exec_w_source_os_redefined=09000_W_Sist Oper fonte redefinido
-exec_i_assembling_pipe=09001_I_Montagem em andamento $1
-exec_d_cant_create_asmfile=09002_E_Assembler nao pode criar o arquivo $1
-% The mentioned file can't be created. Check if you have got
-% access permissions to create this file
-exec_e_cant_create_objectfile=09003_E_Nao pode criar o arquivo objeto: $1
-% The mentioned file can't be created. Check if you've
-% got access permissions to create this file
-exec_e_cant_create_archivefile=09004_E_Nao pode criar o arquivo "archive": $1
-% The mentioned file can't be created. Check if you've
-% access permissions to create this file
-exec_e_assembler_not_found=09005_E_Assembler $1 nao encontrado, mudando para montagem assembly externa
-exec_t_using_assembler=09006_T_Usando o assembler: $1
-exec_e_error_while_assembling=09007_E_Erro durante a montagem assembly -> exitcode $1
-% There was an error while assembling the file using an external assembler.
-% Consult the documentation of the assembler tool to find out more information
-% on this error.
-exec_e_cant_call_assembler=09008_E_Nao pode chamar o assembler, erro $1. Mudando para montagem assembly externa
-exec_i_assembling=09009_I_Montando $1
-exec_i_assembling_smart=09010_I_Montagem com smartlinking $1
-exec_w_objfile_not_found=09011_W_Objeto $1 nao encontrado, a link-edicao pode falhar!
-% One of the object file is missing, and linking will probably fail.
-% Check your paths.
-exec_w_libfile_not_found=09012_W_Library $1 nao encontrada, a link-edicao pode falhar!
-% One of the library file is missing, and linking will probably fail.
-% Check your paths.
-exec_e_error_while_linking=09013_E_Erro durante a link-edicao
-% Generic error while linking.
-exec_e_cant_call_linker=09014_E_Nao pode chamar o linkage editor interno, mudando para link-edicao externa
-exec_i_linking=09015_I_Link edicao de $1
-exec_e_util_not_found=09016_E_Utilitario $1 nao encontrado, mudando para link-edicao externa
-exec_t_using_util=09017_T_Usando utilitario $1
-exec_e_exe_not_supported=09018_E_Criacao de executaveis nao suportada
-exec_e_dll_not_supported=09019_E_Criacao de libraries Dynamic/Shared nao suportada
-exec_i_closing_script=09020_I_Fechando script $1
-exec_e_res_not_found=09021_E_Recurso do compilador nao encontrado, mudando para modo externo
-exec_i_compilingresource=09022_I_Recurso de compilacao $1
-exec_t_unit_not_static_linkable_switch_to_smart=09023_T_A "unit" $1 nao pode ser link-editada de forma estatica, mudando para o modo "smart linking"
-exec_t_unit_not_smart_linkable_switch_to_static=09024_T_A "unit" $1 nao pode ser link-editada no modo "smart linking", mudando para link-edicao estatica
-exec_t_unit_not_shared_linkable_switch_to_static=09025_T_A "unit" $1 nao pode ser link-editada em modo "shared linking", mudando para link-edicao estatica
-exec_e_unit_not_smart_or_static_linkable=09026_E_A "unit" $1 nao pode ser link-editada nem no modo "smart linking" nem em link-edicao estatica
-exec_e_unit_not_shared_or_static_linkable=09027_E_A "unit" $1 nao pode ser link-editada nem no modo "shared linking" nem em link-edicao estatica
-exec_d_resbin_params=09028_D_Chamando o compilador "$1" com a linha de comando "$2"
-%\end{description}
-# EndOfTeX
-
-#
-# Executable information
-#
-execinfo_f_cant_process_executable=09128_F_Nao pode pos-processar o executavel $1
-execinfo_f_cant_open_executable=09129_F_Nao pode abrir o executavel $1
-execinfo_x_codesize=09130_X_Tamanho do codigo: $1 bytes
-execinfo_x_initdatasize=09131_X_Tamanho da area de dados inicializados: $1 bytes
-execinfo_x_uninitdatasize=09132_X_Tamanho da area de dados nao-inicializados: $1 bytes
-execinfo_x_stackreserve=09133_X_Espaco reservado para o stack: $1 bytes
-execinfo_x_stackcommit=09134_X_Espaco realmente usado pelo stack: $1 bytes
-
-#
-# Unit loading
-#
-# 10041 is the last used one
-#
-# BeginOfTeX
-% \section{Unit loading messages.}
-% This section lists all messages that can occur when the compiler is
-% loading a unit from disk into memory. Many of these messages are
-% informational messages.
-% \begin{description}
-unit_t_unitsearch=10000_T_Caminho onde o compilador tentara achar "units": $1
-% When you use the \var{-vt}, the compiler tells you where it tries to find
-% unit files.
-unit_t_ppu_loading=10001_T_"Units" carregadas pelo compilador $1 (.PPU)
-% When the \var{-vt} switch is used, the compiler tells you
-% what units it loads.
-unit_u_ppu_name=10002_U_Nome da "unit"(.PPU): $1
-% When you use the \var{-vu} flag, the unit name is shown.
-unit_u_ppu_flags=10003_U_Flags da "unit"(.PPU): $1
-% When you use the \var{-vu} flag, the unit flags are shown.
-unit_u_ppu_crc=10004_U_Check sum da "unit"(.PPU): $1
-% When you use the \var{-vu} flag, the unit CRC check is shown.
-unit_u_ppu_time=10005_U_Data de compilacao da "unit"(.PPU): $1
-% When you use the \var{-vu} flag, the time the unit was compiled is shown.
-unit_u_ppu_file_too_short=10006_U_Arquivo PPU da "unit" muito pequeno
-% The ppufile is too short, not all declarations are present.
-unit_u_ppu_invalid_header=10007_U_Header de arquivo PPU(de uma "unit") invalido(nao tem PPU no inicio)
-% A unit file contains as the first three bytes the ascii codes of \var{PPU}
-unit_u_ppu_invalid_version=10008_U_Versao de arquivo PPU(de uma "unit") invalida $1
-% This unit file was compiled with a different version of the compiler, and
-% cannot be read.
-unit_u_ppu_invalid_processor=10009_U_"Unit"(arquivo PPU) compilada para outro processador
-% This unit file was compiled for a different processor type, and
-% cannot be read
-unit_u_ppu_invalid_target=10010_U_"Unit"(arquivo PPU) foi compilada para outro sistema operacional
-% This unit file was compiled for a different target, and
-% cannot be read
-unit_u_ppu_source=10011_U_Check sum do arquivo PPU da "unit": $1
-% When you use the \var{-vu} flag, the unit source file name is shown.
-unit_u_ppu_write=10012_U_Gravando as "units"(arquivos PPU) em: $1
-% When you specify the \var{-vu} switch, the compiler will tell you where it
-% writes the unit file.
-unit_f_ppu_cannot_write=10013_F_Nao pode gravar o arquivo PPU
-% An error occurred when writing the unit file.
-unit_f_ppu_read_error=10014_F_Erro durante a leitura de um arquivo PPU
-% This means that the unit file was corrupted, and contains invalid
-% information. Recompilation will be necessary.
-unit_f_ppu_read_unexpected_end=10015_F_Fim de arquivo PPU inesperado
-% Unexpected end of file. This may mean that the PPU file is
-% corrupted.
-unit_f_ppu_invalid_entry=10016_F_Arquivo PPU em formato invalido: $1
-% The unit the compiler is trying to read is corrupted, or generated with a
-% newer version of the compiler.
-unit_f_ppu_dbx_count_problem=10017_F_Problema na contagem Dbx
-% There is an inconsistency in the debugging information of the unit.
-unit_e_illegal_unit_name=10018_E_Nome da "unit" invalido $1. Diverge do nome do arquivo que a contem.
-% The name of the unit does not match the file name.
-unit_f_too_much_units=10019_F_Ha "units" demais. Excedem o limite definido para a compilacao(diretiva maxunits)
-% \fpc has a limit of 1024 units in a program. You can change this behavior
-% by changing the \var{maxunits} constant in the \file{fmodule.pas} file of the
-% compiler, and recompiling the compiler.
-unit_f_circular_unit_reference=10020_F_"Units" $1 e $2 referem-se mutuamente(referencia circular)
-% Two units are using each other in the interface part. This is only allowed
-% in the \var{implementation} part. At least one unit must contain the other one
-% in the \var{implementation} section.
-unit_f_cant_compile_unit=10021_F_"Unit" $1 precisa ser recompilada mas o fonte nao foi encontrado
-% A unit was found that needs to be recompiled, but no sources are
-% available.
-unit_f_cant_find_ppu=10022_F_'Unit'(arquivo PPU) "$1" nao pode ser encontrada
-% You tried to use a unit of which the PPU file isn't found by the
-% compiler. Check your configuration file for the unit paths
-unit_w_unit_name_error=10023_W_"Unit" $1 nao foi encontrada mas a $2 existe
-unit_f_unit_name_error=10024_F_"Unit" $1 procurada mas a $2 foi encontrada
-% Dos truncation of 8 letters for unit PPU files
-% may lead to problems when unit name is longer than 8 letters.
-unit_w_switch_us_missed=10025_W_Para compilar a "unit" System tem que usar a diretiva -Us
-% When recompiling the system unit (it needs special treatment), the
-% \var{-Us} must be specified.
-unit_f_errors_in_unit=10026_F_Houve $1 erros compilando o modulo, compilacao abortada
-% When the compiler encounters a fatal error or too many errors in a module
-% then it stops with this message.
-unit_u_load_unit=10027_U_Carregando $3 a partir da "unit" $1. A carga foi requisitada em $2.
-% When you use the \var{-vu} flag, which unit is loaded from which unit is
-% shown.
-unit_u_recompile_crc_change=10028_U_Recompilando a "unit" $1, checksum mudou para $2
-unit_u_recompile_source_found_alone=10029_U_Recompilando $1 porque foi encontrado somente o fonte
-% When you use the \var{-vu} flag, these messages tell you why the current
-% unit is recompiled.
-unit_u_recompile_staticlib_is_older=10030_U_Recompilando a "unit", algum das "static libraries" e mais antiga que o arquivo PPU
-% When you use the \var{-vu} flag, the compiler warns if the static library
-% of the unit are older than the unit file itself.
-unit_u_recompile_sharedlib_is_older=10031_U_Recompilando a "unit", a "shared lib" e mais antiga que o ppufile
-% When you use the \var{-vu} flag, the compiler warns if the shared library
-% of the unit are older than the unit file itself.
-unit_u_recompile_obj_and_asm_older=10032_U_Recompilando a "unit". Modulos obj e asm tem data mais antiga que o PPU
-% When you use the \var{-vu} flag, the compiler warns if the assembler or
-% object file of the unit are older than the unit file itself.
-unit_u_recompile_obj_older_than_asm=10033_U_Recompilando a "unit". Modulo obj mais antigo que o asm
-% When you use the \var{-vu} flag, the compiler warns if the assembler
-% file of the unit is older than the object file of the unit.
-unit_u_parsing_interface=10034_U_Interpretando interface da "unit" $1
-% When you use the \var{-vu} flag, the compiler warns that it starts
-% parsing the interface part of the unit
-unit_u_parsing_implementation=10035_U_Interpretando implementation da "unit" $1
-% When you use the \var{-vu} flag, the compiler warns that it starts
-% parsing the implementation part of the unit
-unit_u_second_load_unit=10036_U_Segunda carga da "unit" $1
-% When you use the \var{-vu} flag, the compiler warns that it starts
-% recompiling a unit for the second time. This can happend with interdepend
-% units.
-unit_u_check_time=10037_U_Verificando arquivo PPU $1 data/hora $2
-% When you use the \var{-vu} flag, the compiler show the filename and
-% date and time of the file which a recompile depends on
-### The following two error msgs is currently disabled.
-#unit_h_cond_not_set_in_last_compile=10038_H_Conditional $1 was not set at startup in last compilation of $2
-#% when recompilation of an unit is required the compiler will check that
-#% the same conditionals are set for the recompiliation. The compiler has
-#% found a conditional that currently is defined, but was not used the last
-#% time the unit was compiled.
-#unit_h_cond_set_in_last_compile=10039_H_Conditional $1 was set at startup in last compilation of $2
-#% when recompilation of an unit is required the compiler will check that
-#% the same conditionals are set for the recompiliation. The compiler has
-#% found a conditional that was used the last time the unit was compiled, but
-#% the conditional is currently not defined.
-unit_w_cant_compile_unit_with_changed_incfile=10040_W_Nao pode recompilar "unit" $1, mas foram encontrados arquivos de include modificados
-% A unit was found to have modified include files, but
-% some source files were not found, so recompilation is impossible.
-unit_h_source_modified=10041_H_Arquivo $1 e mais recente que o arquivo PPU $2 que foi compilado com flag de release -Ur
-% A modified source file for a unit was found that was compiled with the
-% release flag (-Ur). The unit will not implicitly be recompiled because
-% this release flag is set.
-unit_u_ppu_invalid_fpumode=10042_U_Usando uma "unit" que foi compilada com tipo diferente de emulacao de ponto flutuante(FPU)
-% Trying to compile code while using units which were not compiled with
-% the same floating point format mode. Either all code should be compiled
-% with FPU emulation on, or with FPU emulation off.
-unit_u_loading_interface_units=10043_U_Incluindo "units" relacionadas na interface da "unit" $1
-% When you use the \var{-vu} flag, the compiler warns that it starts
-% loading the units defined in the interface part of the unit.
-unit_u_loading_implementation_units=10044_U_Incluindo "units" relacionadas na implementation da "unit" $1
-% When you use the \var{-vu} flag, the compiler warns that it starts
-% loading the units defined in the implementation part of the unit.
-unit_u_interface_crc_changed=10045_U_Check sum da Interface modificado para a "unit" $1
-% When you use the \var{-vu} flag, the compiler warns that it the
-% CRC calculated for the interface has been changed after the implementation
-% has been parsed.
-unit_u_implementation_crc_changed=10046_U_Check sum da Implementation modificado para a "unit" $1
-% When you use the \var{-vu} flag, the compiler warns that it the
-% CRC calculated has been changed after the implementation
-% has been parsed.
-unit_u_finished_compiling=10047_U_Compilacao da "unit" $1 terminada
-% When you use the \var{-vu} flag, the compiler warns that it
-% has finished compiling the unit.
-unit_u_add_depend_to=10048_U_Dependencia de $1 adicionada a $2
-% When you use the \var{-vu} flag, the compiler warns that it
-% has added a dependency between the two units.
-unit_u_no_reload_is_caller=10049_U_Nao precisa carregar de novo, "unit" ja esta carregada $1
-% When you use the \var{-vu} flag, the compiler warns that it
-% has will not reload the unit because it is the unit that wants
-% to load this unit
-unit_u_no_reload_in_second_compile=10050_U_Nao precisa carregar a unit de novo, e uma recompilacao $1
-% When you use the \var{-vu} flag, the compiler warns that it
-% has will not reload the unit because it is already in a second recompile
-unit_u_flag_for_reload=10051_U_Recarregando: $1
-% When you use the \var{-vu} flag, the compiler warns that it
-% has to reload the unit
-unit_u_forced_reload=10052_U_Recarga forcada
-% When you use the \var{-vu} flag, the compiler warns that it
-% has is reloading the unit because it was required
-unit_u_previous_state=10053_U_Estado anterior de $1: $2
-% When you use the \var{-vu} flag, the compiler shows the
-% previous state of the unit
-unit_u_second_compile_unit=10054_U_Ja compilando $1, setando opcao de recompilacao
-% When you use the \var{-vu} flag, the compiler warns that it starts
-% recompiling a unit for the second time. This can happend with interdepend
-% units.
-unit_u_loading_unit=10055_U_Carregando a "unit" $1
-% When you use the \var{-vu} flag, the compiler warns that it starts
-% loading the unit.
-unit_u_finished_loading_unit=10056_U_Carga da "unit" $1 terminada
-% When you use the \var{-vu} flag, the compiler warns that it finished
-% loading the unit.
-unit_u_registering_new_unit=10057_U_Registrando a nova "unit" $1
-% When you use the \var{-vu} flag, the compiler warns that it has
-% found a new unit and registers it in the internal lists.
-unit_u_reresolving_unit=10058_U_Recalculando area de dados da "unit" $1
-% When you use the \var{-vu} flag, the compiler warns that it
-% has to recalculate the internal data of the unit
-unit_u_skipping_reresolving_unit=10059_U_Pulando o recalculo da area de dados da "unit" $1, "units" usadas ja carregadas
-% When you use the \var{-vu} flag, the compiler warns that it
-% skips to recalculate the internal data of the unit because there
-% is no data to recalculate
-% \end{description}
-# EndOfTeX
-
-#
-#  Options
-#
-# 11039 is the last used one
-#
-option_usage=11000_O_$1 [opcoes] <arquivo entrada> [opcoes]
-# BeginOfTeX
-%
-% \section{Command-line handling errors}
-% This section lists errors that occur when the compiler is processing the
-% command line or handling the configuration files.
-% \begin{description}
-option_only_one_source_support=11001_W_Suportado apenas um arquivo fonte
-% You can specify only one source file on the command line. The first
-% one will be compiled, others will be ignored. This may indicate that
-% you forgot a \var{'-'} sign.
-option_def_only_for_os2=11002_W_Arquivo DEF so pode ser criado para OS/2
-% This option can only be specified when you're compiling for OS/2
-option_no_nested_response_file=11003_E_Response files aninhados nao permitidos
-% you cannot nest response files with the \var{@file} command-line option.
-option_no_source_found=11004_F_Nenhum arquivo fonte especifica na linha de comando
-% The compiler expects a source file name on the command line.
-option_no_option_found=11005_N_Nenhuma opcao dentro do arquivo de configuracao $1
-% The compiler didn't find any option in that config file.
-option_illegal_para=11006_E_Parametro invalido: $1
-% You specified an unknown option.
-option_help_pages_para=11007_H_"-?" exibe paginas de help
-% When an unknown option is given, this message is diplayed.
-option_too_many_cfg_files=11008_F_Muitos arquivos de configuracao aninhados(+ de 16 niveis)
-% You can only nest up to 16 config files.
-option_unable_open_file=11009_F_Nao foi possivel abrir arquivo $1
-% The option file cannot be found.
-option_reading_further_from=11010_D_Lendo opcoes adicionais de $1
-% Displayed when you have notes turned on, and the compiler switches
-% to another options file.
-option_target_is_already_set=11011_W_Sistema operacional destino ja esta setado para: $1
-% Displayed if more than one \var{-T} option is specified.
-option_no_shared_lib_under_dos=11012_W_Libraries shared nao suportados em DOS, revertendo para libraries estaticas
-% If you specify \var{-CD} for the \dos platform, this message is displayed.
-% The compiler supports only static libraries under \dos
-option_too_many_ifdef=11013_F_IF(N)DEFs em excesso
-% the \var{\#IF(N)DEF} statements in the options file are not balanced with
-% the \var{\#ENDIF} statements.
-option_too_many_endif=11014_F_ENDIFs em excesso
-% the \var{\#IF(N)DEF} statements in the options file are not balanced with
-% the \var{\#ENDIF} statements.
-option_too_less_endif=11015_F_Comando de compilacao condicional nao fechado no final de arquivo
-% the \var{\#IF(N)DEF} statements in the options file are not balanced with
-% the \var{\#ENDIF} statements.
-option_no_debug_support=11016_W_Este executavel do compilador nao suporta geracao de informacoes de debug
-% It is possible to have a compiler executable that doesn't support
-% the generation of debugging info. If you use such an executable with the
-% \var{-g} switch, this warning will be displayed.
-option_no_debug_support_recompile_fpc=11017_H_Tente recompilar com -dGDB
-% It is possible to have a compiler executable that doesn't support
-% the generation of debugging info. If you use such an executable with the
-% \var{-g} switch, this warning will be displayed.
-option_obsolete_switch=11018_W_Voce esta usando uma diretiva obsoleta $1
-% this warns you when you use a switch that is not needed/supported anymore.
-% It is recommended that you remove the switch to overcome problems in the
-% future, when the switch meaning may change.
-option_obsolete_switch_use_new=11019_W_Voce esta usando a diretiva obsoleta $1, por favor use $2
-% this warns you when you use a switch that is not supported anymore. You
-% must now use the second switch instead.
-% It is recommended that you change the switch to overcome problems in the
-% future, when the switch meaning may change.
-option_switch_bin_to_src_assembler=11020_N_Mudando assembler para o modo default de fonte
-% this notifies you that the assembler has been changed because you used the
-% -a switch which can't be used with a binary assembler writer.
-option_incompatible_asm=11021_W_Tipo de saida assembler selecionada "$1" nao compativel com "$2"
-option_asm_forced=11022_W_Forcado uso de assembler "$1"
-% The assembler output selected can not generate
-% object files with the correct format. Therefore, the
-% default assembler for this target is used instead.
-option_using_file=11026_T_Lendo opcoes a partir do arquivo $1
-% Options are also read from this file
-option_using_env=11027_T_Lendo opcoes da variavel de ambiente $1
-% Options are also read from this environment string
-option_handling_option=11028_D_Tratando opcao "$1"
-% Debug info that an option is found and will be handled
-option_help_press_enter=11029__*** pressione enter ***
-option_start_reading_configfile=11030_H_Inicio do tratamento do arquivo de configuracao $1
-% Starting of config file parsing.
-option_end_reading_configfile=11031_H_Fim do arquivo durante leitura do arquivo de configuracao $1
-% End of config file parsing.
-option_interpreting_option=11032_D_Interpretando a opcao "$1"
-option_interpreting_firstpass_option=11036_D_Interpretando a opcao de primeiro passo "$1"
-option_interpreting_file_option=11033_D_Interpretando opcao de arquivo "$1"
-option_read_config_file=11034_D_Lendo o arquivo de configuracao "$1"
-option_found_file=11035_D_Encontrado o arquivo fonte "$1"
-% Additional infos about options, displayed
-% when you have debug option turned on.
-option_code_page_not_available=11039_E_Pagina de codigo desconhecida
-option_config_is_dir=11040_F_Arquivo de configuracao $1 e um diretorio
-% Directories can not be used as configuration files.
-%\end{description}
-# EndOfTeX
-
-#
-# Logo (option -l)
-#
-option_logo=11023_[
-Free Pascal Compiler versao $FPCFULLVERSION [$FPCDATE] para $FPCCPU
-Copyright (c) 1993-2009 por Florian Klaempfl
-]
-
-#
-# Info (option -i)
-#
-option_info=11024_[
-Free Pascal Compiler versao $FPCVERSION
-
-Data do compilador : $FPCDATE
-Processador destino: $FPCCPU
-
-Sistemas operacionais atendidos
-  $OSTARGETS
-
-Conjuntos de instrucoes atendidos:
-  $INSTRUCTIONSETS
-
-Conjuntos de instrucoes de ponto flutuante atendidos:
-  $FPUINSTRUCTIONSETS
-
-Este programa vem sob a licenca GNU General Public Licence
-Para mais informacoes leia COPYING.FPC
-
-Informacoes de erros detectados, sugestoes, etc para:
-                 http://bugs.freepascal.org
-ou
-                 [email protected]
-]
-# Help pages
-option_help_pages=11025_[
-**0*_coloque + apos 1 opcao booleana para habilita-la, - para desabilita-la
-**1a_o compilador nao deletou o arquivo assembly gerado
-**2al_Lista as linhas de codigo fonte do arquivo assembly
-**2an_lista as informacoes de node do arquivo assembly
-*L2ap_use pipes(redirecione) ao inves de criar arquivos assembly temporarios
-**2ar_lista informacoes de alocacao/liberacao de registradores no arquivo asembly
-**2at_lista informacoes de alocacao/liberacao temporarias no arquivo assembly
-**1A<x>_Formato de saida:
-**2Adefault_use o assembly default
-3*2Aas_Montagem feita usando o GNU AS
-3*2Anasmcoff_coff (Go32v2) file gerado usando Nasm
-3*2Anasmelf_elf32 (Linux) file gerado usando Nasm
-3*2Anasmwin32_Win32 object file gerado usando Nasm
-3*2Anasmwdosx_Win32/WDOSX object file gerado usando Nasm
-3*2Awasm_obj file gerado usando Wasm (Watcom)
-3*2Anasmobj_obj file gerado usando Nasm
-3*2Amasm_obj file gerado usando Masm (Microsoft)
-3*2Atasm_obj file gerado usando Tasm (Borland)
-3*2Aelf_elf32 (Linux) gerado usando uma internal writer
-3*2Acoff_coff (Go32v2) gerado usando uma internal writer
-3*2Apecoff_pecoff (Win32) gerado usando uma internal writer
-4*2Aas_Montagem feita usando o GNU AS
-6*2Aas_Unix o-file gerado usando o GNU AS
-6*2Agas_GNU Motorola assembler
-6*2Amit_MIT Syntax (old GAS)
-6*2Amot_Standard Motorola assembler
-A*2Aas_Montagem feita usando o GNU AS
-P*2Aas_Montagem feita usando o GNU AS
-S*2Aas_Montagem feita usando o GNU AS
-**1b_gera informacoes do browser
-**2bl_gera a local symbol information
-**1B_Compila/monta todos os modulos
-**1C<x>_opcoes de geracao do codigo:
-**2Cc<x>_default calling convention setada para <x>
-**2CD_criar tambem a dynamic library (nao suportado)
-**2Ce_Compilacao com opcodes de ponto flutuante emulados
-**2Cf<x>_Selecione o conjunto de instrucoes de ponto flutuante a ser usado, veja diretiva -i do FPC para valores possiveis
-**2Cg_Gerar codigo com enderecamento relativo(enderecar usando so o deslocamento do operando)
-**2Ch<n>_define heap com <n> bytes (entre 1023->1KB e 67107840->64 MB)
-**2Ci_IO-checking(validacao dos comandos de I/O)
-**2Cn_Nao executar estagio de link-edicao
-**2Co_Checar overflow de operacoes com inteiros
-**2Cp<x>_seleciona o conjunto de instrucoes, veja diretiva FPC -i para valores possiveis
-**2Cr_range checking(validacao da faixa de validade de valores)
-**2CR_verificar validade das chamadas de metodos de objetos
-**2Cs<n>_seta o tamanho do stack para o valor <n>
-**2Ct_stack checking(verifica estouros da capacidade do stack)
-**2CX_criar tambem a smartlinked library
-**1d<x>_define o simbolo <x>
-**1D_gera um DEF file
-**2Dd<x>_seta a descricao para <x>
-**2Dv<x>_set a versao das DLL para <x>
-*O2Dw_PM application(usa o Presentation manager do OS/2)
-**1e<x>_seta o path para o executavel
-**1E_o mesmo que -Cn
-**1F<x>_seta nomes de arquivos e paths:
-**2Fa<x>[,y]_para o programa primeiro carregar as "units" <x> e [y] antes de interpretar o "uses"
-**2Fc<x>_seta a pagina de codigo da entrada para <x>
-**2FD<x>_seta o diretorio onde procurar pelas utilities do compilador
-**2Fe<x>_redireciona a saida de erros para <x>
-**2FE<x>_seta a saida de exe/units para o path <x>
-**2Fi<x>_adiciona <x> ao(s) path(s) de include
-**2Fl<x>_adiciona <x> ao library path
-**2FL<x>_usa <x> como dynamic linker
-**2Fo<x>_adiciona <x> ao object path
-**2Fr<x>_carrega o arquivo de mensagens de erro <x>
-**2Fu<x>_adiciona <x> ao unit path
-**2FU<x>_seta o unit output path para <x>, anula o informado na diretiva -FE
-*g1g_gerar informacoes para o depurador(debugger)
-*g2gc_gerar checagem de pointers
-*g2gd_usar dbx
-*g2gg_usar gsym
-*g2gh_Usar "unit" de trace de heap (para depuracao de descontinuidade de memoria)
-*g2gl_usar unit com informacoes de numeros de linhas para obter msgs de erro com seu numero de linha
-*g2gv_gerar programas tracaveis com valgrind
-*g2gw_gerar informacoes de depuracao para dwarf
-**1i_informacoes
-**2iD_retorna a data de compilacao do compilador
-**2iV_retorna a versao do compilador
-**2iSO_retorna o sistema operacional onde esta sendo feita a compilacao
-**2iSP_retorna o processador do compilador
-**2iTO_retorna o sistema operacional para o qual sera gerado o executavel
-**2iTP_retorna o processador para o qual sera gerado o executavel
-**1I<x>_adiciona <x> ao(s) path(s) de include
-**1k<x>_Passa <x> para o linkage editor
-**1l_escreva as mensagens de identificacao
-**1M<x>_seta language mode para <x>(delphi, FPC, etc.)
-**2Mfpc_dialeto free pascal (default)
-**2Mobjfpc_ativa algumas extensoes do Delphi 2
-**2Mdelphi_Tenta manter compatibilidade com o Delphi
-**2Mtp_Tenta manter a compatibilidade com TP/BP 7.0
-**2Mgpc_Tenta manter compatibilidade com gpc
-**2Mmacpas_Tenta manter compatibilidade com os dialetos do macintosh pascal
-**1n_nao ler o arquivo de configuracao default
-**2Nu_expanda o conteudo dos loops
-**1o<x>_Troca o nome do executavel produzido para <x>
-**1O<x>_otimizacoes:
-3*2Og_gera codigo(executavel) menor
-3*2OG_gera codigo(executavel) mais rapido(default)
-**2Or_mantem certas variaveis em registradores
-3*2Ou_ativa otimizacoes incertas (veja documentacao)
-3*2O1_otimizacoes de nivel 1 (optimizacoes rapidas)
-3*2O2_otimizacoes de nivel 2(-O1 optimizacoes + lentas)
-3*2O3_otimizacoes de nivel 3(-O2 repetidamente, max 5 vezes)
-3*2Op<x>_processador para o qual sera gerado o executavel(target)
-3*3Op1_seta processador destino como 386/486
-3*3Op2_seta processador destino como Pentium/PentiumMMX (tm)
-3*3Op3_seta processador destino como PPro/PII/c6x86/K6 (tm)
-6*2Og_gera codigo(executavel) menor
-6*2OG_gera codigo(executavel) mais rapido(default)
-6*2Ox_otimize ao maximo(ainda com problemas!!!)
-6*2O0_seta como processador destino(gera executavel para) o MC68000
-6*2O2_seta como processador destino(gera executavel para) o MC68020+ (default)
-**1pg_gera perfil para gprof (cria o FPC_PROFILE)
-**1R<x>_estilo de leitura do assembler:
-**2Rdefault_use o assembler default
-3*2Ratt_ler assembly no estilo AT&T
-3*2Rintel_ler assembly no estilo Intel
-6*2RMOT_ler assembly no estilo motorola
-**1S<x>_opcoes de sintaxe:
-**2S2_o mesmo que -Mobjfpc
-**2Sc_suporta operadores como o C (*=,+=,/= and -=)
-**2Sa_include assertion code.
-**2Sd_o mesmo que -Mdelphi
-**2Se<x>_opcoes de erro. <x> e uma combinacao do seguinte:
-**3*_<n> : compilador para apos <n> erros (o default e 1)
-**3*_w : compilador tambem para apos warnings
-**3*_n : compilador tambem para apos notes
-**3*_h : compilador tambem para apos hints
-**2Sg_permitir LABEL e GOTO
-**2Sh_Use strings do tipo ansistring
-**2Si_dar suporte a INLINE estilo C++
-**2SI<x>_setar estilo de interface para <x>
-**3SIcom_interface compativel com COM (default)
-**3SIcorba_interface compativel com CORBA
-**2Sm_suporta macros como o C (global)
-**2So_o mesmo que -Mtp
-**2Sp_o mesmo que -Mgpc
-**2Ss_constructor tem que se chamar init (destructor tem que se chamar done)
-**2St_permitir a keyword static em objetos
-**1s_nao chamar o assembler nem linker
-**2sh_Gerar script para link edicao no host
-**2st_Gerar script para link edicao no sistema operacional de destino
-**2sr_Pular a fase de alocacao de registradores (usar com -alr)
-**1T<x>_Sistema operacional para o qual sera gerado o executavel(target):
-3*2Temx_OS/2 via EMX (incluindo o extensor EMX/RSX)
-3*2Tfreebsd_FreeBSD
-3*2Tgo32v2_Versao 2 do DJ Delorie DOS extender
-3*2Tlinux_Linux
-3*2Tnetbsd_NetBSD
-3*2Tnetware_Novell Netware Module (clib)
-3*2Tnetwlibc_Novell Netware Module (libc)
-3*2Topenbsd_OpenBSD
-3*2Tos2_OS/2 / eComStation
-3*2Tsunos_SunOS/Solaris
-3*2Twatcom_Watcom compatible DOS extender
-3*2Twdosx_WDOSX DOS extender
-3*2Twin32_Windows 32 Bit
-4*2Tlinux_Linux
-6*2Tamiga_Commodore Amiga
-6*2Tatari_Atari ST/STe/TT
-6*2Tlinux_Linux/m68k
-6*2Tmacos_Macintosh m68k (not supported)
-6*2Tpalmos_PalmOS
-A*2Tlinux_Linux
-P*2Tdarwin_Darwin and MacOS X on PowerPC
-P*2Tlinux_Linux on PowerPC
-P*2Tmacos_MacOS (classic) on PowerPC
-P*2Tmorphos_MorphOS
-S*2Tlinux_Linux
-**1u<x>_excluir definicao do simbolo <x>
-**1U_opcoes de "unit":
-**2Un_nao verifique o nome da "unit"
-**2Ur_gerar arquivos de "unit" do tipo "release"
-**2Us_compilar uma "unit" system
-**1v<x>_Mostrar opcoes de compilacao. <x> e uma combinacao das seguintes letras:
-**2*_e : Mostrar erros (default)     0 : Mostrar somente erros
-**2*_w : Mostrar avisos              u : Mostrar informacoes da "unit"
-**2*_n : Mostrar "notes"             t : Mostrar arquivos acessados/usados
-**2*_h : Mostrar "hints"             c : Mostrar "conditionals"
-**2*_i : Mostrar informacoes gerais  d : Mostrar informacoes de depuracao(debug)
-**2*_l : Mostrar numeros de linha    r : Modo de compatibilidade Rhide/GCCode
-**2*_a : Mostrar tudo                x : Informacoes do executavel (Win32 apenas)
-**2*_v : grava fpcdebug.txt com      p : Grava tree.log com a arvore de parse
-**2*_    muitas informacoes de depuracao
-3*1W<x>_opcoes do sistema operacional de destino no formato Win32
-3*2WB_Criar uma imagem relocavel
-3*2WB<x>_Setar a base da imagem para o valor hexadecimal <x>
-3*2WC_Especifica aplicacao tipo console
-3*2WD_Use DEFFILE para exportar functions de DLL ou EXE
-3*2WF_Especifica aplicacao tipo tela cheia (apenas OS/2)
-3*2WG_Especifica aplicacao grafica
-3*2WN_Nao gerar codigo relocavel (necessario para depuracao)
-3*2WR_Gerar codigo relocavel
-P*2WC_Especifica aplicacao tipo console (apenas MacOS)
-P*2WG_Especifica aplicacao grafica (apenas MacOS)
-P*2WT_Especifica aplicacao do tipo ferramenta (ferramenta MPW, apenas MacOS)
-**1X_opcoes de executavel:
-**2Xc_passar --shared ao linkage editor (apenas Unix)
-**2Xd_nao usar caminho padrao de pesquisa em library (necessario para cross compile)
-**2XD_tentar link editar "units" dinamicas(definir FPC_LINK_DYNAMIC)
-**2Xm_gerar mapa de link edicao
-**2XM<x>_seta o nome da rotina principal do programa (default e 'main')
-**2XP<x>_prefixa os nomes dos binutils com o prefixo <x>
-**2Xr<x>_setar o caminho de pesquisa de libraries para <x> (necessario para cross compile)
-**2Xs_elimine todos os simbolos do executavel
-**2XS_tente link editar as units como static (default) (definido com FPC_LINK_STATIC)
-**2Xt_link editar com static libraries (-static e passado ao linkage editor)
-**2XX_tente link editar as unidades com smart linking(definido com FPC_LINK_SMART)
-**1?_Mostra esta ajuda
-**1h_mostra esta ajuda sem espera
-]
-
-#
-# The End...
-%%% scan_w_only_pack_records=02015_W_O alinhamento de campos de registro so pode ser em 1,2,4,8,16 or 32 bytes
-%%% scan_w_only_pack_enum=02016_W_Tipo enumerado pode ser salvo em apenas 1,2 ou 4 bytes
-%%% parser_e_exit_with_argument_not_possible=03153_E_Nao e possivel usar "Exit" com argumento neste contexto
-%%% parser_e_only_publishable_classes_can_be_published=03156_E_So podem ter atributo "published" classes compiladas com $M+
-%%% type_w_smaller_possible_range_check=04048_W_"Types" de tamanho diferente, havera possivel perda de dados e/ou "range check error"
-%%% mr_e_local_para_unreachable=07015_E_Nao pode acessar a variavel $1 direto deste codigo
-%%% asmr_e_size_suffix_and_dest_dont_match=07045_E_Sufixo de tamanho e o destino ou tamanho da origem nao combinam
-%%% option_no_debug_support=11016_W_Este executavel do compilador nao suporta geracao de informacoes de debug
-%%% scan_e_illegal_pack_records=02015_E_Illegal record alignment specifier "$1"
-% You are specifying the \var{\{\$PACKRECORDS n\} } or \var{\{\$ALIGN n\} }
-% with an illegal value for \var{n}. For \$PACKRECORDS valid alignments are 1, 2, 4, 8, 16, 32, C,
-% NORMAL, DEFAULT, and for \$ALIGN valid alignment are 1, 2, 4, 8, 16, 32, ON,
-% OFF. Under mode MacPas \$ALIGN also supports MAC68K, POWER and RESET.
-%%% scan_e_illegal_pack_enum=02016_E_Illegal enum minimum-size specifier "$1"
-% You are specifying the \var{\{\$PACKENUM n\}} with an illegal value for
-% \var{n}. Only 1,2,4, NORMAL or DEFAULT are valid here.
-%%% scan_e_compile_time_typeerror=02072_E_Compile time expression: Wanted $1 but got $2 at $3
-% Type check of a compile time expression failed.
-% \end{description}
-#
-# Parser
-#
-# 03192 is the last used one
-#
-% \section{Parser messages}
-% This section lists all parser messages. The parser takes care of the
-% semantics of you language, i.e. it determines if your pascal constructs
-% are correct.
-% \begin{description}
-%%% cg_f_unknown_compilerproc=06046_F_Unknown compilerproc "$1". Check if you use the correct run time library.
-% The compiler expects that the runtime library contains some subrountines. If you see this error
-% and you didn't mess with the runtime library, it's very likely that the runtime library
-% you're using doesn't match the used compiler. If you changed the runtime library this error means
-% that you removed a subroutine which the compiler needs for internal use.
-% \end{description}
-# EndOfTeX
-
-#
-# Assembler reader
-#
-# 07097 is the last used one
-#
-%%% exec_d_resbin_params=09028_D_Calling resource compiler "$1" with "$2" as command line
-%\end{description}
-# EndOfTeX
-
-#
-# Executable information
-#

compiler/msg/errorptu.msg

@@ -0,0 +1,3114 @@
+#
+#   This file is part of the Free Pascal Compiler
+#   Copyright (c) 1999-2009 by the Free Pascal Development team
+#
+#   Portuguese (UTF-8) language file for Free Pascal Compiler
+#   Contributed by Marcelo B Paula, based on errore.msg SVN Rev.14440
+#   Former translator: Ari Ricardo Ody <ary.odi at japinfo.com.br>
+#
+#   See the file COPYING.FPC, included in this distribution,
+#   for details about the copyright.
+#
+#   This program is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+#
+#
+# The constants are build in the following order:
+# <part>_<type>_<txtidentifier>
+#
+# <part> is the part of the compiler the message is used
+#   asmr_     assembler parsing
+#   asmw_     assembler writing/binary writers
+#   unit_     unit handling
+#   scan_     scanner
+#   parser_   parser
+#   type_     type checking
+#   general_  general info
+#   exec_     calls to assembler, external linker, binder
+#   link_     internal linker
+#
+# <type> the type of the message it should normally used for
+#   f_   fatal error
+#   e_   error
+#   w_   warning
+#   n_   note
+#   h_   hint
+#   i_   info
+#   l_   add linenumber
+#   u_   used
+#   t_   tried
+#   c_   conditional
+#   d_   debug message
+#   x_   executable informations
+#   o_   normal (e.g., "press enter to continue")
+#
+
+#
+# General
+#
+# 01023 is the last used one
+#
+# BeginOfTeX
+% \section{General compiler messages}
+% This section gives the compiler messages which are not fatal, but which
+% display useful information. The number of such messages can be
+% controlled with the various verbosity level \var{-v} switches.
+% \begin{description}
+general_t_compilername=01000_T_Compilador: $1
+% When the \var{-vt} switch is used, this line tells you what compiler
+% is used.
+general_d_sourceos=01001_D_SO Compilador: $1
+% When the \var{-vd} switch is used, this line tells you what the source
+% operating system is.
+general_i_targetos=01002_I_SO Alvo: $1
+% When the \var{-vd} switch is used, this line tells you what the target
+% operating system is.
+general_t_exepath=01003_T_Usando caminho executável: $1
+% When the \var{-vt} switch is used, this line tells you where the compiler
+% looks for its binaries.
+general_t_unitpath=01004_T_Usando caminho unidade: $1
+% When the \var{-vt} switch is used, this line tells you where the compiler
+% looks for compiled units. You can set this path with the \var{-Fu} option.
+general_t_includepath=01005_T_Usando caminho inclusões: $1
+% When the \var{-vt} switch is used, this line tells you where the compiler
+% looks for its include files (files used in \var{\{\$I xxx\}} statements).
+% You can set this path with the \var{-Fi} option.
+general_t_librarypath=01006_T_Usando caminho biblioteca: $1
+% When the \var{-vt} switch is used, this line tells you where the compiler
+% looks for the libraries. You can set this path with the \var{-Fl} option.
+general_t_objectpath=01007_T_Usando caminho objeto: $1
+% When the \var{-vt} switch is used, this line tells you where the compiler
+% looks for object files you link in (files used in \var{\{\$L xxx\}} statements).
+% You can set this path with the \var{-Fo} option.
+general_i_abslines_compiled=01008_I_$1 linhas compiladas, $2 seg $3
+% When the \var{-vi} switch is used, the compiler reports the number
+% of lines compiled, and the time it took to compile them (real time,
+% not program time).
+general_f_no_memory_left=01009_F_Memória insuficiente
+% The compiler doesn't have enough memory to compile your program. There are
+% several remedies for this:
+% \begin{itemize}
+% \item If you're using the build option of the compiler, try compiling the
+% different units manually.
+% \item If you're compiling a huge program, split it up into units, and compile
+% these separately.
+% \item If the previous two don't work, recompile the compiler with a bigger
+% heap. (You can use the \var{-Ch} option for this, \seeo{Ch}.)
+% \end{itemize}
+general_i_writingresourcefile=01010_I_Gravando arquivo Tabela Recursos 'String': $1
+% This message is shown when the compiler writes the Resource String Table
+% file containing all the resource strings for a program.
+general_e_errorwritingresourcefile=01011_E_Gravando arquivo Tabela Recursos 'String': $1
+% This message is shown when the compiler encounters an error when writing
+% the Resource String Table file.
+general_i_fatal=01012_I_Fatal:
+% Prefix for Fatal Errors.
+general_i_error=01013_I_Erro:
+% Prefix for Errors.
+general_i_warning=01014_I_Aviso:
+% Prefix for Warnings.
+general_i_note=01015_I_Nota:
+% Prefix for Notes.
+general_i_hint=01016_I_Dica:
+% Prefix for Hints.
+general_e_path_does_not_exist=01017_E_Caminho "$1" não existe
+% The specified path does not exist.
+general_f_compilation_aborted=01018_F_Compilação abortada
+% Compilation was aborted.
+general_text_bytes_code=01019_código gerado (bytes)
+% The size of the generated executable code, in bytes.
+general_text_bytes_data=01020_dados gerados (bytes)
+% The size of the generated program data, in bytes.
+general_i_number_of_warnings=01021_I_$1 aviso(s) emitido(s)
+% Total number of warnings issued during compilation.
+general_i_number_of_hints=01022_I_$1 dica(s) emitida(s)
+% Total number of hints issued during compilation.
+general_i_number_of_notes=01023_I_$1 nota(s) emitida(s)
+% Total number of notes issued during compilation.
+% \end{description}
+#
+# Scanner
+#
+# 02086 is the last used one
+#
+% \section{Scanner messages.}
+% This section lists the messages that the scanner emits. The scanner takes
+% care of the lexical structure of the pascal file, i.e. it tries to find
+% reserved words, strings, etc. It also takes care of directives and
+% conditional compilation handling.
+% \begin{description}
+scan_f_end_of_file=02000_F_Fim de arquivo inesperado
+% This typically happens in one of the following cases:
+% \begin{itemize}
+% \item The source file ends before the final \var{end.} statement. This
+% happens mostly when the \var{begin} and \var{end} statements aren't
+% balanced;
+% \item An include file ends in the middle of a statement.
+% \item A comment was not closed.
+% \end{itemize}
+scan_f_string_exceeds_line=02001_F_'String' excendo linha
+% There is a missing closing ' in a string, so it occupies
+% multiple lines.
+scan_f_illegal_char=02002_F_caractere ilegal "$1" ($2)
+% An illegal character was encountered in the input file.
+scan_f_syn_expected=02003_F_Erro sintaxe, "$1" esperado, mas "$2" encontrado
+% This indicates that the compiler expected a different token than
+% the one you typed. It can occur almost anywhere it is possible to make an error
+% against the Pascal language.
+scan_t_start_include_file=02004_TL_Iniciando leitura arquivo de inclusões $1
+% When you provide the \var{-vt} switch, the compiler tells you
+% when it starts reading an included file.
+scan_w_comment_level=02005_W_Nível comentário $1 encontrado
+% When the \var{-vw} switch is used, then the compiler warns you if
+% it finds nested comments. Nested comments are not allowed in Turbo Pascal
+% and Delphi, and can be a possible source of errors.
+scan_n_ignored_switch=02008_N_Ignorar chave compilador "$1"
+% With \var{-vn} on, the compiler warns if it ignores a switch.
+scan_w_illegal_switch=02009_W_Chave ilegal compilador "$1"
+% You included a compiler switch (i.e. \var{\{\$... \}}) which the compiler
+% does not recognise.
+scan_w_switch_is_global=02010_W_Chave global compilador fora de lugar
+% The compiler switch is misplaced, and should be located at
+% the start of the unit or program.
+scan_e_illegal_char_const=02011_E_Constante caractere ilegal
+% This happens when you specify a character with its ASCII code, as in
+% \var{\#96}, but the number is either illegal, or out of range.
+scan_f_cannot_open_input=02012_F_Impossível abrir arquivo "$1"
+% \fpc cannot find the program or unit source file you specified on the
+% command line.
+scan_f_cannot_open_includefile=02013_F_Impossível abrir arquivo de inclusões "$1"
+% \fpc cannot find the source file you specified in a \var{\{\$include ..\}}
+% statement.
+scan_e_illegal_pack_records=02015_E_Especificador alinhamento registro ilegal "$1"
+% You are specifying \var{\{\$PACKRECORDS n\} } or \var{\{\$ALIGN n\} }
+% with an illegal value for \var{n}. For \$PACKRECORDS valid alignments are 1, 2, 4, 8, 16, 32, C,
+% NORMAL, DEFAULT, and for \$ALIGN valid alignments are 1, 2, 4, 8, 16, 32, ON,
+% OFF. Under mode MacPas \$ALIGN also supports MAC68K, POWER and RESET.
+scan_e_illegal_pack_enum=02016_E_Especificador tamanho-mínimo enumeração ilegal "$1"
+% You are specifying the \var{\{\$PACKENUM n\}} with an illegal value for
+% \var{n}. Only 1,2,4, NORMAL or DEFAULT is valid here.
+scan_e_endif_expected=02017_E_$ENDIF esperado para $1 $2 definido em $3 linha $4
+% Your conditional compilation statements are unbalanced.
+scan_e_preproc_syntax_error=02018_E_Erro sintaxe enquanto analisando uma expressão compilação condicional
+% There is an error in the expression following the \var{\{\$if ..\}}, \var{\{\$ifc \}}
+% or \var{\{\$setc \}} compiler directives.
+scan_e_error_in_preproc_expr=02019_E_Avaliando uma expressão compilação condicional
+% There is an error in the expression following the \var{\{\$if ..\}}, $ifc or $setc compiler
+% directives.
+scan_w_macro_cut_after_255_chars=02020_W_Conteúdo macro limitada ao tamanho de 255 caracteres
+% The contents of macros cannot be longer than 255 characters.
+scan_e_endif_without_if=02021_E_ENDIF sem IF(N)DEF
+% Your \var{\{\$IFDEF ..\}} and {\{\$ENDIF\}} statements aren't balanced.
+scan_f_user_defined=02022_F_Definido pelo usuário: $1
+% A user defined fatal error occurred. See also the \progref.
+scan_e_user_defined=02023_E_Definido pelo usuário: $1
+% A user defined error occurred. See also the \progref.
+scan_w_user_defined=02024_W_Definido pelo usuário: $1
+% A user defined warning occurred. See also the \progref.
+scan_n_user_defined=02025_N_Definido pelo usuário: $1
+% A user defined note was encountered. See also the \progref.
+scan_h_user_defined=02026_H_Definido pelo usuário: $1
+% A user defined hint was encountered. See also the \progref.
+scan_i_user_defined=02027_I_Definido pelo usuário: $1
+% User defined information was encountered. See also the \progref.
+scan_e_keyword_cant_be_a_macro=02028_E_Palavra-chave redefinida como macro não tem efeito
+% You cannot redefine keywords with macros.
+scan_f_macro_buffer_overflow=02029_F_Transbordamento "buffer" macro durante leitura ou expansão de uma macro
+% Your macro or its result was too long for the compiler.
+scan_w_macro_too_deep=02030_W_Expansão de macros excede profundidade de 16.
+% When expanding a macro, macros have been nested to a level of 16.
+% The compiler will expand no further, since this may be a sign that
+% recursion is used.
+scan_w_wrong_styled_switch=02031_W_chaves compilador não são suportadas no estilo de comentário //
+% Compiler switches should be in normal Pascal style comments.
+scan_d_handling_switch=02032_DL_Chave manipulação "$1"
+% When you set debugging info on (\var{-vd}) the compiler tells you when it
+% is evaluating conditional compile statements.
+scan_c_endif_found=02033_CL_ENDIF $1 encontrado
+% When you turn on conditional messages (\var{-vc}), the compiler tells you
+% where it encounters conditional statements.
+scan_c_ifdef_found=02034_CL_IFDEF $1 encontrado, $2
+% When you turn on conditional messages (\var{-vc}), the compiler tells you
+% where it encounters conditional statements.
+scan_c_ifopt_found=02035_CL_IFOPT $1 encontrado, $2
+% When you turn on conditional messages (\var{-vc}), the compiler tells you
+% where it encounters conditional statements.
+scan_c_if_found=02036_CL_IF $1 encontrado, $2
+% When you turn on conditional messages (\var{-vc}), the compiler tells you
+% where it encounters conditional statements.
+scan_c_ifndef_found=02037_CL_IFNDEF $1 encontrado, $2
+% When you turn on conditional messages (\var{-vc}), the compiler tells you
+% where it encounters conditional statements.
+scan_c_else_found=02038_CL_ELSE $1 encontrado, $2
+% When you turn on conditional messages (\var{-vc}), the compiler tells you
+% where it encounters conditional statements.
+scan_c_skipping_until=02039_CL_Pulando até...
+% When you turn on conditional messages (\var{-vc}), the compiler tells you
+% where it encounters conditional statements, and whether it is skipping or
+% compiling parts.
+scan_i_press_enter=02040_I_Tecle <return> para continuar
+% When the \var{-vi} switch is used, the compiler stops compilation
+% and waits for the \var{Enter} key to be pressed when it encounters
+% a \var{\{\$STOP\}} directive.
+scan_w_unsupported_switch=02041_W_Chave não suportada "$1"
+% When warnings are turned on (\var{-vw}), the compiler warns you about
+% unsupported switches. This means that the switch is used in Delphi or
+% Turbo Pascal, but not in \fpc.
+scan_w_illegal_directive=02042_W_Diretiva compilador ilegal "$1"
+% When warnings are turned on (\var{-vw}), the compiler warns you about
+% unrecognised switches. For a list of recognised switches, see the \progref.
+scan_t_back_in=02043_TL_De volta $1
+% When you use the \var{-vt} switch, the compiler tells you when it has finished
+% reading an include file.
+scan_w_unsupported_app_type=02044_W_Tipo aplicação não suportada: "$1"
+% You get this warning if you specify an unknown application type
+% with the directive \var{\{\$APPTYPE\}}.
+scan_w_app_type_not_support=02045_W_APPTYPE não é suportado pelo SO alvo
+% The \var{\{\$APPTYPE\}} directive is supported by certain operating systems only.
+scan_w_description_not_support=02046_W_DESCRIPTION não é suportado pelo SO alvo
+% The \var{\{\$DESCRIPTION\}} directive is not supported on this target OS.
+scan_n_version_not_support=02047_N_VERSION não é suportado pelo SO alvo
+% The \var{\{\$VERSION\}} directive is not supported on this target OS.
+scan_n_only_exe_version=02048_N_VERSION apenas para EXEs ou DLLs
+% The \var{\{\$VERSION\}} directive is only used for executable or DLL sources.
+scan_w_wrong_version_ignored=02049_W_Formato incorreto para a diretiva VERSION "$1"
+% The \var{\{\$VERSION\}} directive format is majorversion.minorversion
+% where majorversion and minorversion are words.
+scan_e_illegal_asmmode_specifier=02050_E_Estilo especificado assembler ilegal "$1"
+% When you specify an assembler mode with the \var{\{\$ASMMODE xxx\}} directive,
+% the compiler didn't recognize the mode you specified.
+scan_w_no_asm_reader_switch_inside_asm=02051_W_ASM reader switch is not possible inside asm statement, "$1" will be effective only for next
+% It is not possible to switch from one assembler reader to another
+% inside an assembler block. The new reader will be used for next
+% assembler statements only.
+scan_e_wrong_switch_toggle=02052_E_Chave alternância incorreta, usar ON/OFF ou +/-
+% You need to use ON or OFF or a + or - to toggle the switch.
+scan_e_resourcefiles_not_supported=02053_E_Arquivo recursos não suportado para este alvo
+% The target you are compiling for doesn't support resource files.
+scan_w_include_env_not_found=02054_W_Variável inclusão ambiente "$1" não encontrado no ambiente
+% The included environment variable can't be found in the environment; it will
+% be replaced by an empty string instead.
+scan_e_invalid_maxfpureg_value=02055_E_Valor ilegal para o registrador limite UPF
+% Valid values for this directive are 0..8 and NORMAL/DEFAULT.
+scan_w_only_one_resourcefile_supported=02056_W_Apenas um arquivo de recursos é suportado para este alvo
+% The target you are compiling for supports only one resource file.
+% The first resource file found is used, the others are discarded.
+scan_w_macro_support_turned_off=02057_W_Suporte Macro foi desativado
+% A macro declaration has been found, but macro support is currently off,
+% so the declaration will be ignored. To turn macro support on compile with
+% -Sm on the command line or add \{\$MACRO ON\} in the source.
+scan_e_invalid_interface_type=02058_E_Tipo ilegal de interface especificado. São válidos COM, CORBA ou DEFAULT.
+% The interface type that was specified is not supported.
+scan_w_appid_not_support=02059_W_APPID é suportado apenas para PalmOS
+% The \var{\{\$APPID\}} directive is only supported for the PalmOS target.
+scan_w_appname_not_support=02060_W_APPNAME é suportado apenas para PalmOS
+% The \var{\{\$APPNAME\}} directive is only supported for the PalmOS target.
+scan_e_string_exceeds_255_chars=02061_E_Constante 'String' não pode ser maior que 255 caracteres
+% A single string constant can contain at most 255 chars. Try splitting up the
+% string into multiple smaller parts and concatenate them with a + operator.
+scan_f_include_deep_ten=02062_F_Incluindo arquivos inclusão excede um nível de 16.
+% When including include files the files have been nested to a level of 16.
+% The compiler will expand no further, since this may be a sign that
+% recursion is used.
+scan_e_too_many_push=02063_F_Muitos níveis de PUSH. Max. 20
+% A maximum of 20 levels is allowed. This error occurs only in mode MacPas.
+scan_e_too_many_pop=02064_E_Um POP sem um PUSH anterior
+% This error occurs only in mode MacPas.
+scan_e_error_macro_lacks_value=02065_E_Macro ou variável tempo compilação "$1" sem nenhum valor
+% Thus the conditional compile time expression cannot be evaluated.
+scan_e_wrong_switch_toggle_default=02066_E_Chave alternância incorreta, usar ON/OFF/DEFAULT ou +/-/*
+% You need to use ON or OFF or DEFAULT or a + or - or * to toggle the switch.
+scan_e_mode_switch_not_allowed=02067_E_Chave modo "$1" não permitida aqui
+% A mode switch has already been encountered, or, in the case of option -Mmacpas,
+% a mode switch occurs after UNIT.
+scan_e_error_macro_undefined=02068_E_Variável tempo compilação ou macro "$1" não definida.
+% Thus the conditional compile time expression cannot be evaluated. Only in mode MacPas.
+scan_e_utf8_bigger_than_65535=02069_E_Código UTF-8 maior que 65535 encontrado
+% \fpc handles UTF-8 strings internally as widestrings, i.e. the char codes are limited to 65535.
+scan_e_utf8_malformed=02070_E_'String' UTF-8 mal-formada
+% The given string isn't a valid UTF-8 string.
+scan_c_switching_to_utf8=02071_C_Assinatura UTF-8 encontrada, usando codificação UTF-8
+% The compiler found a UTF-8 encoding signature (\$ef, \$bb, \$bf) at the beginning of a file,
+% so it interprets it as a UTF-8 file.
+scan_e_compile_time_typeerror=02072_E_Expressão tempo compilação: Procurado $1 mas obtido $2 na $3
+% The type-check of a compile time expression failed.
+scan_n_app_type_not_support=02073_N_APPTYPE não é suportado pelo SO alvo
+% The \var{\{\$APPTYPE\}} directive is supported by certain operating systems only.
+scan_e_illegal_optimization_specifier=02074_E_Otimização especificada ilegal "$1"
+% You specified an optimization with the \var{\{\$OPTIMIZATION xxx\}} directive,
+% and the compiler didn't recognize the optimization you specified.
+scan_w_setpeflags_not_support=02075_W_SETPEFLAGS não é suportado pelo SO alvo
+% The \var{\{\$SETPEFLAGS\}} directive is not supported by the target OS.
+scan_w_imagebase_not_support=02076_W_IMAGEBASE não é suportado pelo SO alvo
+% The \var{\{\$IMAGEBASE\}} directive is not supported by the target OS.
+scan_w_minstacksize_not_support=02077_W_MINSTACKSIZE não é suportado pelo SO alvo
+% The \var{\{\$MINSTACKSIZE\}} directive is not supported by the target OS.
+scan_w_maxstacksize_not_support=02078_W_MAXSTACKSIZE não é suportado pelo SO alvo
+% The \var{\{\$MAXSTACKSIZE\}} directive is not supported by the target OS.
+scanner_e_illegal_warn_state=02079_E_Estado ilegal para a diretiva $WARN
+% Only ON and OFF can be used as state with a \var{\{\$WARN\}} compiler directive.
+scan_e_only_packset=02080_E_Valor ilegal para conjunto empacotamento
+% Only 0, 1, 2, 4, 8, DEFAULT and NORMAL are allowed as packset parameters.
+scan_w_pic_ignored=02081_W_Diretiva PIC ou chave ignorada
+% Several targets, such as \windows, do not support nor need PIC,
+% so the PIC directive and switch are ignored.
+scan_w_unsupported_switch_by_target=02082_W_A chave "$1" não é suportada pelo alvo selecionado atualmente
+% Some compiler switches like \$E are not supported by all targets.
+scan_w_frameworks_darwin_only=02084_W_Opções relacionadas a "Framework" são apenas suportadas para Darwin/Mac OS X
+% Frameworks are not a known concept, or at least not supported by FPC,
+% on operating systems other than Darwin/Mac OS X.
+scan_e_illegal_minfpconstprec=02085_E_Constante precisão mínima ponto flutuante ilegal "$1"
+% Valid minimal precisions for floating point constants are default, 32 and 64,
+% which mean respectively minimal (usually 32 bit), 32 bit and 64 bit precision.
+scan_w_multiple_main_name_overrides=02086_W_Sobrescrevendo nome do procedimento "main" múltiplas vezes, foi previamente ajustado para "$1"
+% The name for the main entry procedure is specified more than once. Only the last
+% name will be used.
+% \end{description}
+#
+# Parser
+#
+# 03281 is the last used one
+#
+% \section{Parser messages}
+% This section lists all parser messages. The parser takes care of the
+% semantics of you language, i.e. it determines if your Pascal constructs
+% are correct.
+% \begin{description}
+parser_e_syntax_error=03000_E_Analizador - Erro sintaxe
+% An error against the Turbo Pascal language was encountered. This typically
+% happens when an illegal character is found in the source file.
+parser_e_dont_nest_interrupt=03004_E_Procedimento INTERRUPT não pode ser aninhado
+% An \var{INTERRUPT} procedure must be global.
+parser_w_proc_directive_ignored=03005_W_Tipo procedimento "$1" ignorado
+% The specified procedure directive is ignored by FPC programs.
+parser_e_no_overload_for_all_procs=03006_E_Nem todas as declarações de "$1" estão declaradas com OVERLOAD
+% When you want to use overloading using the \var{OVERLOAD} directive, then
+% all declarations need to have \var{OVERLOAD} specified.
+parser_e_export_name_double=03008_E_Nome função exportada duplicada "$1"
+% Exported function names inside a specific DLL must all be different.
+parser_e_export_ordinal_double=03009_E_Índice função exportada duplicada $1
+% Exported function indexes inside a specific DLL must all be different.
+parser_e_export_invalid_index=03010_E_índice inválido para função exportada
+% DLL function index must be in the range \var{1..\$FFFF}.
+parser_w_parser_reloc_no_debug=03011_W_Informação depuração DLL relocável ou executável $1 não funciona, desabilitado.
+% It is currently not possible to include debug information in a relocatable DLL.
+parser_w_parser_win32_debug_needs_WN=03012_W_Para permitir depuração para código win32 você necessita desabilitar relocação com opção -WN
+% Stabs debug info is wrong for relocatable DLL or EXES. Use -WN
+% if you want to debug win32 executables.
+parser_e_constructorname_must_be_init=03013_E_Nome Construtor deve ser INIT
+% You are declaring an object constructor with a name which is not \var{init}, and the
+% \var{-Ss} switch is in effect. See the switch \seeo{Ss}.
+parser_e_destructorname_must_be_done=03014_E_Nome Destruidor deve ser DONE
+% You are declaring an object destructor with a name which is not \var{done}, and the
+% \var{-Ss} switch is in effect. See the switch \seeo{Ss}.
+parser_e_proc_inline_not_supported=03016_E_Tipo procedimento INLINE não suportado
+% You tried to compile a program with C++ style inlining, and forgot to
+% specify the \var{-Si} option (\seeo{Si}). The compiler doesn't support C++
+% styled inlining by default.
+parser_w_constructor_should_be_public=03018_W_Construtor deve ser público
+% Constructors must be in the 'public' part of an object (class) declaration.
+parser_w_destructor_should_be_public=03019_W_Destruidor deve ser público
+% Destructors must be in the 'public' part of an object (class) declaration.
+parser_n_only_one_destructor=03020_N_Classe deve ter apenas um destruidor
+% You can declare only one destructor for a class.
+parser_e_no_local_objects=03021_E_Definições classe local não permitidas
+% Classes must be defined globally. They cannot be defined inside a
+% procedure or function.
+parser_f_no_anonym_objects=03022_F_Definições classe anônima não permitidas
+% An invalid object (class) declaration was encountered, i.e. an
+% object or class without methods that isn't derived from another object or
+% class. For example:
+% \begin{verbatim}
+% Type o = object
+%          a : longint;
+%          end;
+% \end{verbatim}
+% will trigger this error.
+parser_n_object_has_no_vmt=03023_N_O objeto "$1" não tem VMT
+% This is a note indicating that the declared object has no
+% virtual method table.
+parser_e_illegal_parameter_list=03024_E_Lista parâmetros ilegal
+% You are calling a function with parameters that are of a different type than
+% the declared parameters of the function.
+parser_e_wrong_parameter_size=03026_E_Número incorreto de parâmetros especificado para chamada de "$1"
+% There is an error in the parameter list of the function or procedure --
+% the number of parameters is not correct.
+parser_e_overloaded_no_procedure=03027_E_Identificador sobrecarregado "$1" não é uma função
+% The compiler encountered a symbol with the same name as an overloaded
+% function, but it is not a function it can overload.
+parser_e_overloaded_have_same_parameters=03028_E_Funções sobrecarregadas têm a mesma lista de parâmetros
+% You're declaring overloaded functions, but with the same parameter list.
+% Overloaded function must have at least 1 different parameter in their
+% declaration.
+parser_e_header_dont_match_forward=03029_E_Cabeçalho da função não coincide com a declaração anterior de "$1"
+% You declared a function with the same parameters but
+% different result type or function modifiers.
+parser_e_header_different_var_names=03030_E_Cabeçalho função "$1" não coincide com posterior : nome var modifica $2 => $3
+% You declared the function in the \var{interface} part, or with the
+% \var{forward} directive, but defined it with a different parameter list.
+parser_n_duplicate_enum=03031_N_Valores tipo enumeração têm que ser ascendentes
+% \fpc allows enumeration constructions as in C. Examine the following
+% two declarations:
+% \begin{verbatim}
+% type a = (A_A,A_B,A_E:=6,A_UAS:=200);
+% type a = (A_A,A_B,A_E:=6,A_UAS:=4);
+% \end{verbatim}
+% The second declaration would produce an error. \var{A\_UAS} needs to have a
+% value higher than \var{A\_E}, i.e. at least 7.
+parser_e_no_with_for_variable_in_other_segments=03033_E_With não pode ser usado para variáveis em segmentos diferentes
+% With stores a variable locally on the stack,
+% but this is not possible if the variable belongs to another segment.
+parser_e_too_much_lexlevel=03034_E_Aninhamento função > 31
+% You can nest function definitions only 31 levels deep.
+parser_e_range_check_error=03035_E_Erro verificação de faixa enquanto avaliando constantes
+% The constants are out of their allowed range.
+parser_w_range_check_error=03036_W_Erro verificação de faixa enquanto avaliando constantes
+% The constants are out of their allowed range.
+parser_e_double_caselabel=03037_E_Rótulo duplicado declaração "case"
+% You are specifying the same label 2 times in a \var{case} statement.
+parser_e_case_lower_less_than_upper_bound=03038_E_Limite superior da faixa declaração "case" é menor que o limite inferior
+% The upper bound of a \var{case} label is less than the lower bound and this
+% is useless.
+parser_e_type_const_not_possible=03039_E_Constantes tipadas de classes ou interfaces não são permitidas
+% You cannot declare a constant of type class or object.
+parser_e_no_overloaded_procvars=03040_E_Variáveis função de funções sobrecarregadas não são permitidas
+% You are trying to assign an overloaded function to a procedural variable.
+% This is not allowed.
+parser_e_invalid_string_size=03041_E_Comprimento 'String' deve ter valor entre 1 à 255
+% The length of a shortstring in Pascal is limited to 255 characters. You are
+% trying to declare a string with length less than 1 or greater than 255.
+parser_w_use_extended_syntax_for_objects=03042_W_Use sintaxe extendida de NEW e DISPOSE para instanciar objetos
+% If you have a pointer \var{a} to an object type, then the statement
+% \var{new(a)} will not initialize the object (i.e. the constructor isn't
+% called), although space will be allocated. You should issue the
+% \var{new(a,init)} statement. This will allocate space, and call the
+% constructor of the object.
+parser_w_no_new_dispose_on_void_pointers=03043_W_Uso de NEW ou DISPOSE para ponteiros não tipados não tem sentido
+parser_e_no_new_dispose_on_void_pointers=03044_E_Uso de NEW ou DISPOSE não é possível para ponteiros não tipados
+% You cannot use \var{new(p)} or \var{dispose(p)} if \var{p} is an untyped pointer
+% because no size is associated to an untyped pointer.
+% It is accepted for compatibility in \var{TP} and \var{DELPHI} modes, but the
+% compiler will still warn you if it finds such a construct.
+parser_e_class_id_expected=03045_E_Identificador de classe esperado
+% This happens when the compiler scans a procedure declaration that contains
+% a dot, i.e., an object or class method, but the type in front of the dot is not
+% a known type.
+parser_e_no_type_not_allowed_here=03046_E_Identificador tipo não permitido aqui
+% You cannot use a type inside an expression.
+parser_e_methode_id_expected=03047_E_Identificador de método esperado
+% This identifier is not a method.
+% This happens when the compiler scans a procedure declaration that contains
+% a dot, i.e., an object or class method, but the procedure name is not a
+% procedure of this type.
+parser_e_header_dont_match_any_member=03048_E_Cabeçalho função não coincide com qualquer método desta classe "$1"
+% This identifier is not a method.
+% This happens when the compiler scans a procedure declaration that contains
+% a dot, i.e., an object or class method, but the procedure name is not a
+% procedure of this type.
+parser_d_procedure_start=03049_DL_Procedimento/função $1
+% When using the \var{-vd} switch, the compiler tells you when it starts
+% processing a procedure or function implementation.
+parser_e_error_in_real=03050_E_Constante ponto flutuante ilegal
+% The compiler expects a floating point expression, and gets something else.
+parser_e_fail_only_in_constructor=03051_E_FAIL só pode ser usado em contrutores
+% You are using the \var{fail} keyword outside a constructor method.
+parser_e_no_paras_for_destructor=03052_E_Destruidores não podem ter parâmetros
+% You are declaring a destructor with a parameter list. Destructor methods
+% cannot have parameters.
+parser_e_only_class_methods_via_class_ref=03053_E_Apenas métodos classe podem ser referenciadas por referências classe
+% This error occurs in a situation like the following:
+% \begin{verbatim}
+% Type :
+%    Tclass = Class of Tobject;
+%
+% Var C : TClass;
+%
+% begin
+% ...
+% C.free
+% \end{verbatim}
+% \var{Free} is not a class method and hence cannot be called with a class
+% reference.
+parser_e_only_class_methods=03054_E_Apenas métodos classe podem ser acessadas em métodos de classe
+% This is related to the previous error. You cannot call a method of an object
+% from inside a class method. The following code would produce this error:
+% \begin{verbatim}
+% class procedure tobject.x;
+%
+% begin
+%   free
+% \end{verbatim}
+% Because free is a normal method of a class it cannot be called from a class
+% method.
+parser_e_case_mismatch=03055_E_Constante e tipo CASE incompatíveis
+% One of the labels is not of the same type as the case variable.
+parser_e_illegal_symbol_exported=03056_E_Símbolos só podem ser exportados em uma biblioteca
+% You can only export procedures and functions when you write a library. You
+% cannot export variables or constants.
+parser_w_should_use_override=03057_W_Um método herdado é ocultado por "$1"
+% A method that is declared \var{virtual} in a parent class, should be
+% overridden in the descendant class with the \var{override} directive. If you
+% don't specify the \var{override} directive, you will hide the parent method;
+% you will not override it.
+parser_e_nothing_to_be_overridden=03058_E_Não há método na classe ancestral para ser sobreposto: "$1"
+% You are trying to \var{override} a virtual method of a parent class that does
+% not exist.
+parser_e_no_procedure_to_access_property=03059_E_Nenhum membro foi provido para acessar a propriedade
+% You specified no \var{read} directive for a property.
+parser_w_stored_not_implemented=03060_W_Diretiva propriedade armazenamento ainda não foi implementada
+% This message is no longer used, as the \var{stored} directive has been implemented.
+parser_e_ill_property_access_sym=03061_E_Símbolo ilegal para acesso propriedade
+% There is an error in the \var{read} or \var{write} directives for an array
+% property. When you declare an array property, you can only access it with
+% procedures and functions. The following code would cause such an error.
+% \begin{verbatim}
+% tmyobject = class
+%   i : integer;
+%   property x [i : integer]: integer read I write i;
+% \end{verbatim}
+%
+parser_e_cant_access_protected_member=03062_E_Não é possível acessar um campo protegido de um objeto aqui
+% Fields that are declared in a \var{protected} section of an object or class
+% declaration cannot be accessed outside the module where the object is
+% defined, or outside descendent object methods.
+parser_e_cant_access_private_member=03063_E_Não é possível acessar um campo privado de um objeto aqui
+% Fields that are declared in a \var{private} section of an object or class
+% declaration cannot be accessed outside the module where the class is
+% defined.
+parser_e_overridden_methods_not_same_ret=03066_E_Métodos sobrepostos devem ter o mesmo tipo de retorno: "$2" é sobreposto por "$1" que possui outro tipo retorno
+% If you declare overridden methods in a class definition, they must
+% have the same return type.
+parser_e_dont_nest_export=03067_E_Funções EXPORT declaradas não podem estar aninhadas
+% You cannot declare a function or procedure within a function or procedure
+% that was declared as an export procedure.
+parser_e_methods_dont_be_export=03068_E_Métodos não podem ser EXPORTados
+% You cannot declare a procedure that is a method for an object as
+% \var{export}ed.
+parser_e_call_by_ref_without_typeconv=03069_E_Chamada por var. para arg. no. $1 tem que coincidir exatamente: Obtido "$2" esperado "$3"
+% When calling a function declared with \var{var} parameters, the variables in
+% the function call must be of exactly the same type. There is no automatic
+% type conversion.
+parser_e_no_super_class=03070_E_Classe não é uma classe pai da classe atual
+% When calling inherited methods, you are trying to call a method of a non-related
+% class. You can only call an inherited method of a parent class.
+parser_e_self_not_in_method=03071_E_SELF é permitido apenas em métodos
+% You are trying to use the \var{self} parameter outside an object's method.
+% Only methods get passed the \var{self} parameters.
+parser_e_generic_methods_only_in_methods=03072_E_Métodos só podem estar em outros métodos se chamados diretamente com o identificador de tipo da classe
+% A construction like \var{sometype.somemethod} is only allowed in a method.
+parser_e_illegal_colon_qualifier=03073_E_Uso ilegal de ':'
+% You are using the format \var{:} (colon) 2 times on an expression that
+% is not a real expression.
+parser_e_illegal_set_expr=03074_E_Erro verificação de faixa em conjunto construtor ou elemento conjunto duplicado
+% The declaration of a set contains an error. Either one of the elements is
+% outside the range of the set type, or two of the elements are in fact
+% the same.
+parser_e_pointer_to_class_expected=03075_E_Ponteiro para objeto esperado
+% You specified an illegal type in a \var{new} statement.
+% The extended syntax of \var{new} needs an object as a parameter.
+parser_e_expr_have_to_be_constructor_call=03076_E_Expressão deve ser chamada ao construtor
+% When using the extended syntax of \var{new}, you must specify the constructor
+% method of the object you are trying to create. The procedure you specified
+% is not a constructor.
+parser_e_expr_have_to_be_destructor_call=03077_E_Expressão deve ser chamada ao destruidor
+% When using the extended syntax of \var{dispose}, you must specify the
+% destructor method of the object you are trying to dispose of.
+% The procedure you specified is not a destructor.
+parser_e_invalid_record_const=03078_E_Ordem ilegal dos elementos do registro
+% When declaring a constant record, you specified the fields in the wrong
+% order.
+parser_e_false_with_expr=03079_E_Tipo expressão deve ser classe ou tipo registro
+% A \var{with} statement needs an argument that is of the type \var{record}
+% or \var{class}. You are using \var{with} on an expression that is not of
+% this type.
+parser_e_void_function=03080_E_Procedimentos não podem retornar um valor
+% In \fpc, you can specify a return value for a function when using
+% the \var{exit} statement. This error occurs when you try to do this with a
+% procedure. Procedures cannot return a value.
+parser_e_constructors_always_objects=03081_E_Construtores e destruidores devem ser métodos
+% You're declaring a procedure as destructor or constructor, when the
+% procedure isn't a class method.
+parser_e_operator_not_overloaded=03082_E_Operador não é sobrecarregado
+% You're trying to use an overloaded operator when it is not overloaded for
+% this type.
+parser_e_no_such_assignment=03083_E_Impossível sobrecarregar atribuições para tipos iguais
+% You can not overload assignment for types
+% that the compiler considers as equal.
+parser_e_overload_impossible=03084_E_Operador sobrecarga impossível
+% The combination of operator, arguments and return type are
+% incompatible.
+parser_e_no_reraise_possible=03085_E_Re-elevar não é possível lá
+% You are trying to re-raise an exception where it is not allowed. You can only
+% re-raise exceptions in an \var{except} block.
+parser_e_no_new_or_dispose_for_classes=03086_E_A sintaxe estendida para new ou dispose não é permitida para uma classe
+% You cannot generate an instance of a class with the extended syntax of
+% \var{new}. The constructor must be used for that. For the same reason, you
+% cannot call \var{dispose} to de-allocate an instance of a class, the
+% destructor must be used for that.
+parser_e_procedure_overloading_is_off=03088_E_Sobrecarga de procimento está desativada
+% When using the \var{-So} switch, procedure overloading is switched off.
+% Turbo Pascal does not support function overloading.
+parser_e_overload_operator_failed=03089_E_Não é possível sobrecarregar este operador. Operadores relacionados possíveis de sobrecarga (se algum) são: $1
+% You are trying to overload an operator which cannot be overloaded.
+% The following operators can be overloaded :
+% \begin{verbatim}
+%    +, -, *, /, =, >, <, <=, >=, is, as, in, **, :=
+% \end{verbatim}
+parser_e_comparative_operator_return_boolean=03090_E_Operador de comparação deve retornar um valor boleano
+% When overloading the \var{=} operator, the function must return a boolean
+% value.
+parser_e_only_virtual_methods_abstract=03091_E_Apenas métodos virtuais podem ser abstratos
+% You are declaring a method as abstract, when it is not declared to be
+% virtual.
+parser_f_unsupported_feature=03092_F_Uso de característica não suportada!
+% You're trying to force the compiler into doing something it cannot do yet.
+parser_e_mix_of_classes_and_objects=03093_E_A mistura de diferentes espécies de objetos (class, object, interface, etc) não é permitida
+% You cannot derive \var{objects}, \var{classes}, \var{cppclasses} and \var{interfaces} intertwined. E.g.
+% a class cannot have an object as parent and vice versa.
+parser_w_unknown_proc_directive_ignored=03094_W_Diretiva desconhecida de procedimento teve que ser ignorada: "$1"
+% The procedure directive you specified is unknown.
+parser_e_absolute_only_one_var=03095_E_Absolute só pode estar associada a uma variável
+% You cannot specify more than one variable before the \var{absolute} directive.
+% Thus, the following construct will provide this error:
+% \begin{verbatim}
+% Var Z : Longint;
+%     X,Y : Longint absolute Z;
+% \end{verbatim}
+parser_e_absolute_only_to_var_or_const=03096_E_Absolute só pode estar associada com uma variável ou constante
+% The address of an \var{absolute} directive can only point to a variable or
+% constant. Therefore, the following code will produce this error:
+% \begin{verbatim}
+%   Procedure X;
+%
+%  var p : longint absolute x;
+% \end{verbatim}
+parser_e_initialized_only_one_var=03097_E_Apenas uma variável pode ser inicializada
+% You cannot specify more than one variable with a initial value in Delphi mode.
+parser_e_abstract_no_definition=03098_E_Métodos abstratos não devem ter qualquer definição (com corpo função)
+% Abstract methods can only be declared, you cannot implement them. They
+% should be overridden by a descendant class.
+parser_e_overloaded_must_be_all_global=03099_E_Esta função sobrecarregada não pode ser local (deve ser exportada)
+% You are defining an overloaded function in the implementation part of a unit,
+% but there is no corresponding declaration in the interface part of the unit.
+parser_w_virtual_without_constructor=03100_W_Métodos virtuais são usados sem um construtor em "$1"
+% If you declare objects or classes that contain virtual methods, you need
+% to have a constructor and destructor to initialize them. The compiler
+% encountered an object or class with virtual methods that doesn't have
+% a constructor/destructor pair.
+parser_c_macro_defined=03101_CL_Macro definida: $1
+% When \var{-vc} is used, the compiler tells you when it defines macros.
+parser_c_macro_undefined=03102_CL_Macro indefinida: $1
+% When \var{-vc} is used, the compiler tells you when it undefines macros.
+parser_c_macro_set_to=03103_CL_Macro $1 ajustada para $2
+% When \var{-vc} is used, the compiler tells you what values macros get.
+parser_i_compiling=03104_I_Compilando $1
+% When you turn on information messages (\var{-vi}), the compiler tells you
+% what units it is recompiling.
+parser_u_parsing_interface=03105_UL_Analisando interface da unidade $1
+% This tells you that the reading of the interface
+% of the current unit has started
+parser_u_parsing_implementation=03106_UL_Analisando implementação de $1
+% This tells you that the code reading of the implementation
+% of the current unit, library or program starts
+parser_d_compiling_second_time=03107_DL_Compilando $1 uma segunda vez
+% When you request debug messages (\var{-vd}) the compiler tells you what
+% units it recompiles for the second time.
+parser_e_no_property_found_to_override=03109_E_Nenhuma propriedade encontrada para sobrepor
+% You want to override a property of a parent class, when there is, in fact,
+% no such property in the parent class.
+parser_e_only_one_default_property=03110_E_Apenas uma propriedade padrão é permitida
+% You specified a property as \var{Default}, but the class already has a
+% default property, and a class can have only one default property.
+parser_e_property_need_paras=03111_E_A propriedade padrão deve ser uma propriedade matriz
+% Only array properties of classes can be made \var{default} properties.
+parser_e_constructor_cannot_be_not_virtual=03112_E_Construtores virtuais são suportados apenas modelo objeto classe
+% You cannot have virtual constructors in objects. You can only have them
+% in classes.
+parser_e_no_default_property_available=03113_E_Nenhuma propriedade padrão disponível
+% You are trying to access a default property of a class, but this class (or one of
+% its ancestors) doesn't have a default property.
+parser_e_cant_have_published=03114_E_A classe não pode ter uma seção PUBLISHED, use a chave {$M+}
+% If you want a \var{published} section in a class definition, you must
+% use the \var{\{\$M+\}} switch, which turns on generation of type
+% information.
+parser_e_forward_declaration_must_be_resolved=03115_E_Declaração posterior da classe "$1" deve ser resolvida aqui para usar a classe como ancestral
+% To be able to use an object as an ancestor object, it must be defined
+% first. This error occurs in the following situation:
+% \begin{verbatim}
+%  Type ParentClas = Class;
+%       ChildClass = Class(ParentClass)
+%         ...
+%       end;
+% \end{verbatim}
+% where \var{ParentClass} is declared but not defined.
+parser_e_no_local_operator=03116_E_Operadores locais não suportados
+% You cannot overload locally, i.e. inside procedures or function
+% definitions.
+parser_e_proc_dir_not_allowed_in_interface=03117_E_Diretiva procedimento "$1" não permitida na seção interface
+% This procedure directive is not allowed in the \var{interface} section of
+% a unit. You can only use it in the \var{implementation} section.
+parser_e_proc_dir_not_allowed_in_implementation=03118_E_Diretiva procedimento "$1" não permitida na seção implementação
+% This procedure directive is not allowed in the \var{implementation} section of
+% a unit. You can only use it in the \var{interface} section.
+parser_e_proc_dir_not_allowed_in_procvar=03119_E_Diretiva procedimento "$1" não permitida na declaração procvar
+% This procedure directive cannot be part of a procedural or function
+% type declaration.
+parser_e_function_already_declared_public_forward=03120_E_Função já declarada como Pública/Posterior "$1"
+% You will get this error if a function is defined as \var{forward} twice.
+% Or if it occurs in the \var{interface} section, and again as a \var{forward}
+% declaration in the \var{implementation} section.
+parser_e_not_external_and_export=03121_E_Impossível usar ambos EXPORT e EXTERNAL
+% These two procedure directives are mutually exclusive.
+parser_w_not_supported_for_inline=03123_W_"$1" não suportado ainda dentro procedimento/função em linha
+% Inline procedures don't support this declaration.
+parser_w_inlining_disabled=03124_W_Procedimentos em linha desabilitados
+% Inlining of procedures is disabled.
+parser_i_writing_browser_log=03125_I_Gravando histório Navegador $1
+% When information messages are on, the compiler warns you when it
+% writes the browser log (generated with the \var{\{\$Y+ \}} switch).
+parser_h_maybe_deref_caret_missing=03126_H_Talvez desreferência de ponteiro esteja faltando
+% The compiler thinks that a pointer may need a dereference.
+parser_f_assembler_reader_not_supported=03127_F_Leitor assembler selecionado não suportado
+% The selected assembler reader (with \var{\{\$ASMMODE xxx\}} is not
+% supported. The compiler can be compiled with or without support for a
+% particular assembler reader.
+parser_e_proc_dir_conflict=03128_E_Diretiva procedimento "$1" tem conflitos com outras diretivas
+% You specified a procedure directive that conflicts with other directives.
+% For instance \var{cdecl} and \var{pascal} are mutually exclusive.
+parser_e_call_convention_dont_match_forward=03129_E_Convenção de chamada não coincide com declaração posterior
+% This error happens when you declare a function or procedure with
+% e.g. \var{cdecl;} but omit this directive in the implementation, or vice
+% versa. The calling convention is part of the function declaration, and
+% must be repeated in the function definition.
+parser_e_property_cant_have_a_default_value=03131_E_Propriedade não pode ter um valor padrão
+% Set properties or indexed properties cannot have a default value.
+parser_e_property_default_value_must_const=03132_E_O valor padrão de um propriedade deve ser uma constante
+% The value of a \var{default} declared property must be known at compile
+% time. The value you specified is only known at run time. This happens
+% e.g. if you specify a variable name as a default value.
+parser_e_cant_publish_that=03133_E_Símbolo não pode ser PUBLISHED, pode ser apenas uma classe
+% Only class type variables can be in a \var{published} section of a class
+% if they are not declared as a property.
+parser_e_cant_publish_that_property=03134_E_Este tipo de propriedade não pode ser PUBLISHED
+% Properties in a \var{published} section cannot be array properties.
+% They must be moved to public sections. Properties in a \var{published}
+% section must be an ordinal type, a real type, strings or sets.
+parser_e_empty_import_name=03136_E_Um nome importação é requerido
+% Some targets need a name for the imported procedure or a \var{cdecl} specifier.
+parser_e_division_by_zero=03138_E_Divisão por zero
+% A division by zero was encounted.
+parser_e_invalid_float_operation=03139_E_Operação ponto flutuante inválida
+% An operation on two real type values produced an overflow or a division
+% by zero.
+parser_e_array_lower_less_than_upper_bound=03140_E_Limite superior da faixa é menor que o limite inferior
+% The upper bound of an array declaration is less than the lower bound and this
+% is not possible.
+parser_w_string_too_long=03141_W_'String' "$1" é maior que "$2"
+% The size of the constant string is larger than the size you specified in
+% string type definition.
+parser_e_string_larger_array=03142_E_Comprimento 'String' é maior que o comprimento da matriz de caractere
+% The size of the constant string is larger than the size you specified in
+% the \var{Array[x..y] of char} definition.
+parser_e_ill_msg_expr=03143_E_Expressão ilegal após diretiva mensagem
+% \fpc supports only integer or string values as message constants.
+parser_e_ill_msg_param=03144_E_Manipuladores mensagens podem ter apenas uma chamada por parâmetro referência
+% A method declared with the \var{message} directive as message handler
+% can take only one parameter which must be declared as call by reference.
+% Parameters are declared as call by reference using the \var{var}-directive.
+parser_e_duplicate_message_label=03145_E_Rótulo mensagem duplicado: "$1"
+% A label for a message is used twice in one object/class.
+parser_e_self_in_non_message_handler=03146_E_Self pode ser um parâmetro explícito apenas em métodos que são manipuladores de mensagens
+% The \var{Self} parameter can only be passed explicitly to a method which
+% is declared as message handler.
+parser_e_threadvars_only_sg=03147_E_Threadvars podem ser apenas estáticas ou globais
+% Threadvars must be static or global; you can't declare a thread
+% local to a procedure. Local variables are always local to a thread,
+% because every thread has its own stack and local variables
+% are stored on the stack.
+parser_f_direct_assembler_not_allowed=03148_F_Assembler direto não suportado para formato de saída binário
+% You can't use direct assembler when using a binary writer. Choose an
+% other output format or use another assembler reader.
+parser_w_no_objpas_use_mode=03149_W_Não carregue a unidade OBJPAS manualmente, use \{\$mode objfpc\} ou \{\$mode delphi\}
+% You are trying to load the \file{ObjPas} unit manually from a \var{uses} clause.
+% This is not a good idea. Use the \var{\{\$MODE OBJFPC\}} or
+% \var{\{\$mode delphi\}} directives which load the unit automatically.
+parser_e_no_object_override=03150_E_OVERRIDE não pode ser usado em objetos
+% \var{Override} is not supported for objects, use \var{virtual} instead to override
+% a method of a parent object.
+parser_e_cant_use_inittable_here=03151_E_Tipos de dados que requerem inicialização/finalização não podem ser usados em registros variant
+% Some data types (e.g. \var{ansistring}) need initialization/finalization
+% code which is implicitly generated by the compiler. Such data types
+% can't be used in the variant part of a record.
+parser_e_resourcestring_only_sg=03152_E_Recursos 'String' podem ser apenas estáticos ou globais
+% Resourcestring can not be declared local, only global or using the static
+% directive.
+parser_e_exit_with_argument_not__possible=03153_E_EXIT com argumentos não pode ser usado aqui
+% An exit statement with an argument for the return value can't be used here. This
+% can happen for example in \var{try..except} or \var{try..finally} blocks.
+parser_e_stored_property_must_be_boolean=03154_E_O tipo do símbolo de armazenamento deve ser boleano
+% If you specify a storage symbol in a property declaration, it must be a
+% boolean type.
+parser_e_ill_property_storage_sym=03155_E_Este símbolo não é permitido como símbolo de armazenamento
+% You can't use this type of symbol as storage specifier in property
+% declaration. You can use only methods with the result type boolean,
+% boolean class fields or boolean constants.
+parser_e_only_publishable_classes_can_be_published=03156_E_Apenas classes que são compiladas no modo $M+ podem ser PUBLISHED
+% A class-typed field in the published section of a class can only be a class which was
+% compiled in \var{\{\$M+\}} or which is derived from such a class. Normally
+% such a class should be derived from \var{TPersistent}.
+parser_e_proc_directive_expected=03157_E_Diretiva procedimento esperada
+% This error is triggered when you have a \var{\{\$Calling\}} directive without
+% a calling convention specified.
+% It also happens when declaring a procedure in a const block and you
+% used a ; after a procedure declaration which must be followed by a
+% procedure directive.
+% Correct declarations are:
+% \begin{verbatim}
+% const
+%   p : procedure;stdcall=nil;
+%   p : procedure stdcall=nil;
+% \end{verbatim}
+parser_e_invalid_property_index_value=03158_E_O valor de um índice de propriedade deve ser do tipo ordinal
+% The value you use to index a property must be of an ordinal type, for
+% example an integer or enumerated type.
+parser_e_procname_to_short_for_export=03159_E_Nome procedimento muito curto para ser exportado
+% The length of the procedure/function name must be at least 2 characters
+% long. This is because of a bug in dlltool which doesn't parse the .def
+% file correctly with a name of length 1.
+parser_e_dlltool_unit_var_problem=03160_E_Nenhuma entrada DEFFILE pode ser gerada para vars. globais unidade
+parser_e_dlltool_unit_var_problem2=03161_E_Compile sem a opção -WD
+% You need to compile this file without the -WD switch on the
+% command line.
+parser_f_need_objfpc_or_delphi_mode=03162_F_Você precisa do modo ObjFpc (-S2) ou Delphi (-Sd) para compilar este módulo
+% You need to use \var{\{\$MODE OBJFPC\}} or \var{\{\$MODE DELPHI\}} to compile this file.
+% Or use the corresponding command line switch, either \var{-Mobjfpc} or \var{-MDelphi.}
+parser_e_no_export_with_index_for_target=03163_E_Impossível exportar com índice sob $1
+% Exporting of functions or procedures with a specified index is not
+% supported on this target.
+parser_e_no_export_of_variables_for_target=03164_E_Exportação de variáveis não é suportada sob $1
+% Exporting of variables is not supported on this target.
+parser_e_improper_guid_syntax=03165_E_Sintaxe GUID imprópria
+% The GUID indication does not have the proper syntax. It should be of the form
+% \begin{verbatim}
+% {XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}
+% \end{verbatim}
+% Where each \var{X} represents a hexadecimal digit.
+parser_w_interface_mapping_notfound=03168_W_Procedimento chamado "$1" que fosse adequado à implementação de $2.$3 não encontrado
+% The compiler cannot find a suitable procedure which implements the given method of an interface.
+% A procedure with the same name is found, but the arguments do not match.
+parser_e_interface_id_expected=03169_E_Identificador interface esperado
+% This happens when the compiler scans a \var{class} declaration that contains
+% \var{interface} function name mapping code like this:
+% \begin{verbatim}
+% type
+%   TMyObject = class(TObject, IDispatch)
+%     function IUnknown.QueryInterface=MyQueryInterface;
+%     ....
+% \end{verbatim}
+% and the \var{interface} before the dot is not listed in the inheritance list.
+parser_e_type_cant_be_used_in_array_index=03170_E_Tipo "$1" não pode ser usado como tipo índice matriz
+% Types like \var{qword} or \var{int64} aren't allowed as array index type.
+parser_e_no_con_des_in_interfaces=03171_E_Construtor e destruidor não permitidos em interfaces
+% Constructor and destructor declarations aren't allowed in interfaces.
+% In the most cases method \var{QueryInterface} of \var{IUnknown} can
+% be used to create a new interface.
+parser_e_no_access_specifier_in_interfaces=03172_E_Especificadores de acesso não podem ser usados em INTERFACEs e OBJCPROTOCOLs
+% The access specifiers \var{public}, \var{private}, \var{protected} and
+% \var{published} can't be used in interfaces, Objective-C protocols and categories because all methods
+% of an interface/protocol/category must be public.
+parser_e_no_vars_in_interfaces=03173_E_Uma interface ou protocolo Objective-C ou categoria não pode conter campos
+% Declarations of fields are not allowed in interfaces and Objective-C protocols and categories.
+% An interface/protocol/category can contain only methods and properties with method read/write specifiers.
+parser_e_no_local_proc_external=03174_E_Impossíve declarar procedimento local como EXTERNAL
+% Declaring local procedures as external is not possible. Local procedures
+% get hidden parameters that will make the chance of errors very high.
+parser_w_skipped_fields_before=03175_W_Alguns campos que vêm antes de "$1" não foram inicializados
+% In Delphi mode, not all fields of a typed constant record have to be
+% initialized, but the compiler warns you when it detects such situations.
+parser_e_skipped_fields_before=03176_E_Alguns campos que vêm antes de "$1" não foram inicializados
+% In all syntax modes but Delphi mode, you can't leave some fields uninitialized
+% in the middle of a typed constant record.
+parser_w_skipped_fields_after=03177_W_Alguns campos que vêm depois de "$1" não foram inicializados
+% You can leave some fields at the end of a type constant record uninitialized
+% (The compiler will initialize them to zero automatically). This may be the cause
+% of subtle problems.
+parser_e_varargs_need_cdecl_and_external=03178_E_Diretiva VarArgs (ou '...' em MacPas) sem CDecl/CPPDecl/MWPascal e External
+% The varargs directive (or the ``...'' varargs parameter in MacPas mode) can only be
+% used with procedures or functions that are declared with \var{external} and one of
+% \var{cdecl}, \var{cppdecl} and \var{mwpascal}. This functionality
+% is only supported to provide a compatible interface to C functions like printf.
+parser_e_self_call_by_value=03179_E_Self deve ser um parâmetro normal (chamada-por-valor)
+% You can't declare \var{Self} as a const or var parameter, it must always be
+% a call-by-value parameter.
+parser_e_interface_has_no_guid=03180_E_Interface "$1" não tem identificação de interface
+% When you want to assign an interface to a constant, then the interface
+% must have a GUID value set.
+parser_e_illegal_field_or_method=03181_E_Campo classe ou identificador método "$1" desconhecido
+% Properties must refer to a field or method in the same class.
+parser_w_proc_overriding_calling=03182_W_Convenção chamada sobreposição "$1" com "$2"
+% There are two directives in the procedure declaration that specify a calling
+% convention. Only the last directive will be used.
+parser_e_no_procvarobj_const=03183_E_Constantes tipadas do tipo "procedimento de objeto" podem ser apenas inicializadas com NIL
+% You can't assign the address of a method to a typed constant which has a
+% 'procedure of object' type, because such a constant requires two addresses:
+% that of the method (which is known at compile time) and that of the object or
+% class instance it operates on (which can not be known at compile time).
+parser_e_default_value_only_one_para=03184_E_Valor padrão pode ser atribuído apenas à um parâmetro
+% It is not possible to specify a default value for several parameters at once.
+% The following is invalid:
+% \begin{verbatim}
+% Procedure MyProcedure (A,B : Integer = 0);
+% \end{verbatim}
+% Instead, this should be declared as
+% \begin{verbatim}
+% Procedure MyProcedure (A : Integer = 0; B : Integer = 0);
+% \end{verbatim}
+parser_e_default_value_expected_for_para=03185_E_Parâmetro padrão requerido para "$1"
+% The specified parameter requires a default value.
+parser_w_unsupported_feature=03186_W_Uso de característica não suportada!
+% You're trying to force the compiler into doing something it cannot do yet.
+parser_h_c_arrays_are_references=03187_H_Matrizes C são passadas por referência
+% Any array passed to a C function is passed
+% by a pointer (i.e. by reference).
+parser_e_C_array_of_const_must_be_last=03188_E_Matrizes de constantes C devem ser o último argumento
+% You can not add any other argument after an \var{array of const} for
+% \var{cdecl} functions, as the size pushed on stack for this argument is
+% not known.
+parser_h_type_redef=03189_H_Redefinição do tipo "$1"
+% This is an indicator that a previously declared type is
+% being redefined as something else. This may, or may not
+% be, a potential source of errors.
+parser_w_cdecl_has_no_high=03190_W_Funções declaradas com cdecl não tem um parâmetro implícito extra
+% Functions declared with the \var{cdecl} modifier do not pass an extra implicit parameter.
+parser_w_cdecl_no_openstring=03191_W_Funções declaradas com cdecl não suportam 'String' aberta
+% Openstring is not supported for functions that have the \var{cdecl} modifier.
+parser_e_initialized_not_for_threadvar=03192_E_Impossível inicializar variáveis declaradas como threadvar
+% Variables declared as threadvar can not be initialized with a default value.
+% The variables will always be filled with zero at the start of a new thread.
+parser_e_msg_only_for_classes=03193_E_Diretiva mensagem é permitida apenas em Classes
+% The message directive is only supported for Class types.
+parser_e_procedure_or_function_expected=03194_E_Procedimento ou Função esperados
+% A class method can only be specified for procedures and functions.
+parser_e_illegal_calling_convention=03195_W_Diretiva convenção de chamada ignorada: "$1"
+% Some calling conventions are supported only by certain CPUs. I.e. most non-i386 ports support
+% only the standard ABI calling convention of the CPU.
+parser_e_no_object_reintroduce=03196_E_REINTRODUCE não pode ser usado em objetos
+% \var{reintroduce} is not supported for objects, Objective-C classes and Objective-C protocols.
+parser_e_paraloc_only_one_para=03197_E_Cada argumento deve ter sua própria localização
+% If locations for arguments are specified explicitly as it is required by
+% some syscall conventions, each argument must have its own location. Things
+% like
+% \begin{verbatim}
+% procedure p(i,j : longint 'r1');
+% \end{verbatim}
+% aren't allowed.
+parser_e_paraloc_all_paras=03198_E_Cada argumento deve ter uma localização explícita
+% If one argument has an explicit argument location, all arguments of a procedure
+% must have one.
+parser_e_illegal_explicit_paraloc=03199_E_Localização argumento desconhecida
+% The location specified for an argument isn't recognized by the compiler.
+parser_e_32bitint_or_pointer_variable_expected=03200_E_Inteiro 32-Bit ou variável ponteiro esperados
+% The libbase for MorphOS/AmigaOS can be given only as \var{longint}, \var{dword} or any pointer variable.
+parser_e_goto_outside_proc=03201_E_Declaração Goto não permitida entre procedimentos diferentes
+% It isn't allowed to use \var{goto} statements referencing labels outside the
+% current procedure. The following example shows the problem:
+% \begin{verbatim}
+% ...
+%   procedure p1;
+%   label
+%     l1;
+%
+%     procedure p2;
+%     begin
+%       goto l1; // This goto ISN'T allowed
+%     end;
+%
+%   begin
+%     p2
+%   l1:
+%   end;
+% ...
+%
+% \end{verbatim}
+parser_f_too_complex_proc=03202_F_Procedimento muito complexo, ele requer muitos registradores
+% Your procedure body is too long for the compiler. You should split the
+% procedure into multiple smaller procedures.
+parser_e_illegal_expression=03203_E_Expressão ilegal
+% This can occur under many circumstances. Usually when trying to evaluate
+% constant expressions.
+parser_e_invalid_integer=03204_E_Expressão inteira inválida
+% You made an expression which isn't an integer, and the compiler expects the
+% result to be an integer.
+parser_e_invalid_qualifier=03205_E_Qualifiador ilegal
+% One of the following is happening :
+% \begin{itemize}
+% \item You're trying to access a field of a variable that is not a record.
+% \item You're indexing a variable that is not an array.
+% \item You're dereferencing a variable that is not a pointer.
+% \end{itemize}
+parser_e_upper_lower_than_lower=03206_E_Limite de faixa alta < limite de faixa baixa
+% You are declaring a subrange, and the high limit is less than the low limit of
+% the range.
+parser_e_macpas_exit_wrong_param=03207_E_Parâmetro de saída deve ser o nome do procedimento em que ele é usado
+% Non local exit is not allowed. This error occurs only in mode MacPas.
+parser_e_illegal_assignment_to_count_var=03208_E_Atribuição ilegal para a variável for-loop "$1"
+% The type of a \var{for} loop variable must be an ordinal type.
+% Loop variables cannot be reals or strings. You also cannot assign values to
+% loop variables inside the loop (Except in Delphi and TP modes). Use a while or
+% repeat loop instead if you need to do something like that, since those
+% constructs were built for that.
+parser_e_no_local_var_external=03209_E_Impossível declarar variável local como EXTERNAL
+% Declaring local variables as external is not allowed. Only global variables can reference
+% external variables.
+parser_e_proc_already_external=03210_E_Procedimento já foi declarado como EXTERNAL
+% The procedure is already declared with the EXTERNAL directive in an interface or
+% forward declaration.
+parser_w_implicit_uses_of_variants_unit=03211_W_Uso implícito da unidade Variants
+% The Variant type is used in the unit without any used unit using the Variants unit. The
+% compiler has implicitly added the Variants unit to the uses list. To remove this warning
+% the Variants unit needs to be added to the uses statement.
+parser_e_no_static_method_in_interfaces=03212_E_Classe e métodos estáticos não podem ser usados em INTERFACES
+% The specifier \var{class} and directive \var{static} can't be used in interfaces
+% because all methods of an interface must be public.
+parser_e_arithmetic_operation_overflow=03213_E_Transbordamento em operação aritimética
+% An operation on two integer values produced an overflow.
+parser_e_protected_or_private_expected=03214_E_Protected ou private esperados
+% \var{strict} can be only used together with \var{protected} or \var{private}.
+parser_e_illegal_slice=03215_E_SLICE não pode ser usado fora da lista de parâmetros
+% \var{slice} can be used only for arguments accepting an open array parameter.
+parser_e_dispinterface_cant_have_parent=03216_E_Uma DISPINTERFACE não pode ter uma classe pai
+% A DISPINTERFACE is a special type of interface which can't have a parent class.
+parser_e_dispinterface_needs_a_guid=03217_E_Uma DISPINTERFACE necessita de um GUID
+% A DISPINTERFACE always needs an interface identification (a GUID).
+parser_w_overridden_methods_not_same_ret=03218_W_Métodos susbtituídos devem ter um tipo de retorno relacionados. Este código pode travar, ele depende de uma falha do analizador Delphi ("$2" é sobreposto por "$1" que possue outro tipo de retorno)
+% If you declare overridden methods in a class definition, they must
+% have the same return type. Some versions of Delphi allow you to change the
+% return type of interface methods, and even to change procedures into
+% functions, but the resulting code may crash depending on the types used
+% and the way the methods are called.
+parser_e_dispid_must_be_ord_const=03219_E_IDs despacho devem ser constantes ordinais
+% The \var{dispid} keyword must be followed by an ordinal constant (the dispid index).
+parser_e_array_range_out_of_bounds=03220_E_A faixa da matriz é demasiada grande
+% Regardless of the size taken up by its elements, an array cannot have more
+% than high(ptrint) elements. Additionally, the range type must be a subrange
+% of ptrint.
+parser_e_packed_element_no_var_addr=03221_E_O endereço não pode ser obtido de elementos de matriz de bits compactados ou campos de registro
+% If you declare an array or record as \var{packed} in Mac Pascal mode
+% (or as \var{packed} in any mode with \var{\{\$bitpacking on\}}), it will
+% be packed at the bit level. This means it becomes impossible to take addresses
+% of individual array elements or record fields. The only exception to this rule
+% is in the case of packed arrays elements whose packed size is a multple of 8 bits.
+parser_e_packed_dynamic_open_array=03222_E_Matrizes dinâmicas não podem ser compactadas
+% Only regular (and possibly in the future also open) arrays can be packed.
+parser_e_packed_element_no_loop=03223_E_Elementos de matrizes de bits compactados ou campos de registro não podem ser usadas como variáveis de laços
+% If you declare an array or record as \var{packed} in Mac Pascal mode
+% (or as \var{packed} in any mode with \var{\{\$bitpacking on\}}), it will
+% be packed at the bit level. For performance reasons, they cannot be
+% used as loop variables.
+parser_e_type_and_var_only_in_generics=03224_E_VAR e TYPE são permitidos apenas em genéricos
+% The usage of VAR and TYPE to declare new types inside an object is allowed only inside
+% generics.
+parser_e_cant_create_generics_of_this_type=03225_E_Este tipo não pode ser um genérico
+% Only Classes, Objects, Interfaces and Records are allowed to be used as generic.
+parser_w_no_lineinfo_use_switch=03226_W_Não caregue a unidade LINEINFO manualmente, Em vez disso utilize a chave de compilador -gl
+% Do not use the \file{lineinfo} unit directly, Use the \var{-gl} switch which
+% automatically adds the correct unit for reading the selected type of debugging
+% information. The unit that needs to be used depends on the type of
+% debug information used when compiling the binary.
+parser_e_no_funcret_specified=03227_E_Nenhum tipo de retorno de função especificado para a função "$1"
+% The first time you declare a function you have to declare it completely,
+% including all parameters and the result type.
+parser_e_special_onlygenerics=03228_E_Especialização é suportado apenas por tipos genéricos
+% Types which are not generics can't be specialized.
+parser_e_no_generics_as_params=03229_E_Genéricos não podem ser usados como parâmetros quando especializando genéricos
+% When specializing a generic, only non-generic types can be used as parameters.
+parser_e_type_object_constants=03230_E_Constantes de objetos contendo uma VMT não são permitidas
+% If an object requires a VMT either because it contains a constructor or virtual methods,
+% it's not allowed to create constants of it. In TP and Delphi mode this is allowed
+% for compatibility reasons.
+parser_e_label_outside_proc=03231_E_Obter o endereço de rótulos definidos fora do escopo atual não é permitido
+% It isn't allowed to take the address of labels outside the
+% current procedure.
+parser_e_initialized_not_for_external=03233_E_Impossível inicializar variáveis declaradas como externas
+% Variables declared as external can not be initialized with a default value.
+parser_e_illegal_function_result=03234_E_Tipo de retorno de função ilegal
+% Some types like file types can not be used as function result.
+parser_e_no_common_type=03235_E_Nenhum tipo comum entre "$1" e "$2"
+% To perform an operation on integers, the compiler converts both operands
+% to their common type, which appears to be an invalid type. To determine the
+% common type of the operands, the compiler takes the minimum of the minimal values
+% of both types, and the maximum of the maximal values of both types. The common
+% type is then minimum..maximum.
+parser_e_no_generics_as_types=03236_E_Genéricos sem especialização não podem ser usadas como um tipo para uma variável
+% Generics must be always specialized before being used as variable type.
+parser_w_register_list_ignored=03237_W_Lista registros é ignorada para rotinas assembler puras
+% When using pure assembler routines, the list with modified registers is ignored.
+parser_e_implements_must_be_class_or_interface=03238_E_Propriedade 'Implements' deve ter tipo classe ou interface
+% A property which implements an interface must be of type class or interface.
+parser_e_implements_must_have_correct_type=03239_E_Propriedade 'Implements' deve implementar interface de tipo correto, encontrado "$1" esperado "$2"
+% A property which implements an interface actually implements a different interface.
+parser_e_implements_must_read_specifier=03240_E_Propriedade 'Implements' deve ter especificador de leitura
+% A property  which implements an interface must have at least a read specifier.
+parser_e_implements_must_not_have_write_specifier=03241_E_Propriedade 'Implements' não deve ter especificador de escrita
+% A property  which implements an interface may not have a write specifier.
+parser_e_implements_must_not_have_stored_specifier=03242_E_Propriedade 'Implements' não deve ter especificador de armazenagem
+% A property  which implements an interface may not have a stored specifier.
+parser_e_implements_uses_non_implemented_interface=03243_E_Propriedade 'Implements' usada em interface não implementada: "$1"
+% The interface which is implemented by a property is not an interface implemented by the class.
+parser_e_unsupported_real=03244_E_Ponto flutuante não suportado para este alvo
+% The compiler parsed a floating point expression, but it is not supported.
+parser_e_class_doesnt_implement_interface=03245_E_Classe "$1" não implementa interface "$2"
+% The delegated interface is not implemented by the class given in the implements clause.
+parser_e_class_implements_must_be_interface=03246_E_Tipo usado por implementação deve ser uma interface
+% The \var{implements} keyword must be followed by an interface type.
+parser_e_cant_export_var_different_name=03247_E_Variáveis não podem ser exportadas com um nome diferente neste alvo, adicione o nome na declaração usando a diretiva "export" (nome variável: $1, nome exportação declarado: $2)
+% On most targets it is not possible to change the name under which a variable
+% is exported inside the \var{exports} statement of a library.
+% In that case, you have to specify the export name at the point where the
+% variable is declared, using the \var{export} and \var{alias} directives.
+parser_e_weak_external_not_supported=03248_E_Símbolos externos fracos não são suportados para o atual alvo
+% A "weak external" symbol is a symbol which may or may not exist at (either static
+% or dynamic) link time. This concept may not be available (or implemented yet)
+% on the current cpu/OS target.
+parser_e_forward_mismatch=03249_E_Definição posterior tipo incompatível
+% Classes and interfaces being defined forward must have the same type
+% when being implemented. A forward interface can not be changed into a class.
+parser_n_ignore_lower_visibility=03250_N_Método virtual "$1" tem baixa visibilidade ($2) que a classe pai $3 ($4)
+% The virtual method overrides an method that is declared with a higher visibility. This might give
+% unexpected results. In case the new visibility is private than it might be that a call to inherited in a
+% new child class will call the higher visible method in a parent class and ignores the private method.
+parser_e_field_not_allowed_here=03251_E_Campos não podem aparecer depois dem um método ou definição propriedade, inicie uma nova seção de visibilidade primeiro
+% Once a method or property has been defined in a class or object, you cannot define any fields afterwards
+% without starting a new visibility section (such as \var{public}, \var{private}, etc.). The reason is
+% that otherwise the source code can appear ambiguous to the compiler, since it is possible to use modifiers
+% such as \var{default} and \var{register} also as field names.
+parser_e_no_local_para_def=03252_E_Parâmetros não podem conter definições locais de tipo. Use uma definição de tipo separada em um bloco de tipos
+% In Pascal, types are not considered to be identical simply because they are semantically equivalent.
+% Two variables or parameters are only considered to be of the same type if they refer to the
+% same type definition.
+% As a result, it is not allowed to define new types inside parameter lists, because then it is impossible to
+% refer to the same type definition in the procedure headers of the interface and implementation of a unit
+% (both procedure headers would define a separate type). Keep in mind that expressions such as
+% ``file of byte'' or ``string[50]'' also define a new type.
+parser_e_abstract_and_sealed_conflict=03253_E_Conflito ABSTRACT e SEALED
+% ABSTRACT and SEALED can not be used together in one declaration
+parser_e_sealed_descendant=03254_E_Impossível criar um descendente da classe selada "$1"
+% Sealed means that class can not be derived by another class.
+parser_e_sealed_class_cannot_have_abstract_methods=03255_E_Classe selada não pode ter um método abstrato
+% Sealed means that class cannot be derived. Therefore no one class is able to override an abstract method in a sealed class.
+parser_e_only_virtual_methods_final=03256_E_Apenas métodos virtuais podem ser finais
+% You are declaring a method as final, when it is not declared to be
+% virtual.
+parser_e_final_can_no_be_overridden=03257_E_Método final não pode ser sobreposto: "$1"
+% You are trying to \var{override} a virtual method of a parent class that does
+% not exist.
+parser_e_multiple_messages=03258_E_Apenas uma mensagem pode ser usada por método.
+% It is not possible to associate multiple messages with a single method.
+parser_e_invalid_enumerator_identifier=03259_E_Identificador enumerador inválido: "$1"
+% Only "MoveNext" and "Current" enumerator identifiers are supported.
+parser_e_enumerator_identifier_required=03260_E_Identificador enumerador requerido
+% "MoveNext" or "Current" identifier must follow the \var{enumerator} modifier.
+parser_e_enumerator_movenext_is_not_valid=03261_E_Método enumerador 'MoveNext' padrão inválido. Método deve ser uma função com tipo de retorno boleano e sem argumentos requeridos.
+% "MoveNext" enumerator pattern method must be a function with Boolean return type and no required arguments
+parser_e_enumerator_current_is_not_valid=03262_E_Propriedade enumerador 'Current' padrão inválido. Propriedade deve ter um 'getter'.
+% "Current" enumerator pattern property must have a getter
+parser_e_only_one_enumerator_movenext=03263_E_Apenas um método enumerador 'MoveNext' é permitido por classe/objeto
+% Class or Object can have only one enumerator MoveNext declaration.
+parser_e_only_one_enumerator_current=03264_E_Apenas uma propriedade enumerador 'Current' é permitida por classe/objeto
+% Class or Object can have only one enumerator Current declaration.
+parser_e_for_in_loop_cannot_be_used_for_the_type=03265_E_Laço 'for in' não pode ser usado para o tipo "$1"
+% For in loop can be used not for all types. For example it can not be used for the enumerations with jumps.
+parser_e_objc_requires_msgstr=03266_E_Mensagens Objective-C requerem que seu nome seletor Objective-C seja especificado usando a diretiva "message".
+% Objective-C messages require their Objective-C name (selector name) to be specified using the \var{message `someName:'} procedure directive.
+% While bindings to other languages automatically generate such names based on the identifier you use (by replacing
+% all underscores with colons), this is unsafe since nothing prevents an Objective-C method name to contain actual
+% colons.
+parser_e_objc_no_constructor_destructor=03267_E_Objective-C não tem construtores nem destruidores formais. Use as mensagens 'alloc', 'initXXX' e 'dealloc'.
+% The Objective-C language does not have any constructors or destructors. While there are some messages with a similar
+% purpose (such as \var{init} and \var{dealloc}), these cannot be identified using automatic parsers and do not
+% guarantee anything like Pascal constructors/destructors (e.g., you have to take care of only calling ``designated''
+% inherited ``constructors''). For these reasons, we have opted to follow the standard Objective-C patterns for
+% instance creation/destruction.
+parser_e_message_string_too_long=03268_E_Nome mensagem é muito longo (max. 255 caracteres)
+% Due to compiler implementation reasons, message names are currently limited to 255 characters.
+parser_e_objc_message_name_too_long=03269_E_Nome símbolo mensagem Objective-C para "$1" é muito longo
+% Due to compiler implementation reasons, mangled message names (i.e., the symbol names used in the assembler
+% code) are currently limited to 255 characters.
+parser_h_no_objc_parent=03270_H_Definindo uma nova classe raiz Objective-C. Para derivar de outra classe raiz (ex., NSObject), especifique-a como pai da classe
+% If no parent class is specified for an Object Pascal class, then it automatically derives from TObject.
+% Objective-C classes however do not automatically derive from NSObject, because one can have multiple
+% root classes in Objective-C. For example, in the Cocoa framework both NSObject and NSProxy are root classes.
+% Therefore, you have to explicitly define a parent class (such as NSObject) if you want to derive your
+% Objective-C class from it.
+parser_e_no_objc_published=03271_E_Classes Objective-C não podem ter seções PUBLISHED
+% In Object Pascal, ``published'' determines whether or not RTTI is generated. Since the Objective-C runtime always needs
+% RTTI for everything, this specified does not make sense for Objective-C classes.
+parser_f_need_objc=03272_F_Este módulo requer que seja especificado uma chave de modo Objective-C para ser compilado
+% This error indicates the use of Objective-C language features without an Objective-C mode switch
+% active. Enable one via the -M command line switch, or the {\$modeswitch x} directive.
+parser_e_must_use_override_objc=03273_E_Métodos herdados podem apenas ser sobrepostos em Objective-C, adicione "OVERRIDE".
+parser_h_should_use_override_objc=03274_H_Métodos herdados podem apenas ser sobrepostos em Objective-C, adicinone "OVERRIDE".
+% It is not possible to \var{reintroduce} methods in Objective-C like in Object Pascal. Methods with the same
+% name always map to the same virtual method entry. In order to make this clear in the source code,
+% the compiler always requires the \var{override} directive to be specified when implementing overriding
+% Objective-C methods in Pascal. If the implementation is external, this rule is relaxed because Objective-C
+% does not have any \var{override}-style keyword (since it's the default and only behaviour in that language),
+% which makes it hard for automated header conversion tools to include it everywhere.
+parser_e_objc_message_name_changed=03275_E_Nome mensagem "$1" na classe herdada é diferente do nome mensagem "$2" na classe atual.
+% An overriding Objective-C method cannot have a different message name than an inherited method. The reason
+% is that these message names uniquely define the message to the Objective-C runtime, which means that
+% giving them a different message name breaks the ``override'' semantics.
+parser_e_no_objc_unique=03276_E_Ainda não é possível fazer cópias únicas de tipos Objective-C
+% Duplicating an Objective-C type using \var{type x = type y;} is not yet supported. You may be able to
+% obtain the desired effect using \var{type x = objcclass(y) end;} instead.
+parser_e_no_category_as_types=03277_E_Categorias Objective-C não podem ser usadas como tipos
+% It is not possible to declare a variable as an instance of an Objective-C category. A
+% category adds methods to the scope of an existing class, but does not define a type by itself.
+parser_e_no_category_override=03278_E_Categorias não sobrepõem, mas substituem métodos. Use "REINTRODUCE".
+parser_e_must_use_reintroduce_objc=03279_E_Métodos substituídos podem apenas ser reintroduzidos em Objective-C, adicione "REINTRODUCE".
+parser_h_should_use_reintroduce_objc=03280_H_Métodos substituídos podem apenas ser reintroduzidos em Objective-C, adicione "REINTRODUCE".
+% A category replaces an existing method in an Objective-C class, rather than that it overrides it.
+% Calling an inherited method from an category method will call that method in
+% the extended class' parent, not in the extended class itself. The
+% replaced method in the original class is basically lost, and can no longer be
+% called or referred to. This behaviour corresponds somewhat more closely to
+% \var{reintroduce} than to \var{override} (although in case of \var{reintroduce}
+% in Object Pascal, hidden methods are still reachable via inherited).
+parser_e_implements_getter_not_default_cc=03281_E_'Getter' para implementação interface deve usar a convenção de chamada padrão do alvo.
+% Interface getters are called via a helper in the run time library, and hence
+% have to use the default calling convention for the target (\var{register} on
+% i386 and x86_64, \var{stdcall} on other architectures).
+% \end{description}
+#
+# Type Checking
+#
+# 04094 is the last used one
+#
+% \section{Type checking errors}
+% This section lists all errors that can occur when type checking is
+% performed.
+% \begin{description}
+type_e_mismatch=04000_E_Tipo incompatível
+% This can happen in many cases:
+% \begin{itemize}
+% \item The variable you're assigning to is of a different type than the
+% expression in the assignment.
+% \item You are calling a function or procedure with parameters that are
+% incompatible with the parameters in the function or procedure definition.
+% \end{itemize}
+type_e_incompatible_types=04001_E_Tipos incompatíveis: obtido "$1" esperado "$2"
+% There is no conversion possible between the two types.
+% Another possiblity is that they are declared in different
+% declarations:
+% \begin{verbatim}
+% Var
+%    A1 : Array[1..10] Of Integer;
+%    A2 : Array[1..10] Of Integer;
+%
+% Begin
+%    A1:=A2; { This statement also gives this error. It
+%              is due to the strict type checking of Pascal }
+% End.
+% \end{verbatim}
+type_e_not_equal_types=04002_E_Tipos incompatíveis entre "$1" e "$2"
+% The types are not equal.
+type_e_type_id_expected=04003_E_Identificador de tipo esperado
+% The identifier is not a type, or you forgot to supply a type identifier.
+type_e_variable_id_expected=04004_E_Identificador de variável esperado
+% This happens when you pass a constant to a routine (such as \var{Inc} var or \var{Dec})
+% when it expects a variable. You can only pass variables as arguments to these functions.
+type_e_integer_expr_expected=04005_E_Expressão inteira esperada, mas obtido "$1"
+% The compiler expects an expression of type integer, but gets a different
+% type.
+type_e_boolean_expr_expected=04006_E_Expressão boleana esperada, mas obtido "$1"
+% The expression must be a boolean type. It should be return \var{True} or
+% \var{False}.
+type_e_ordinal_expr_expected=04007_E_Expressão ordinal esperada
+% The expression must be of ordinal type, i.e., maximum a \var{Longint}.
+% This happens, for instance, when you specify a second argument
+% to \var{Inc} or \var{Dec} that doesn't evaluate to an ordinal value.
+type_e_pointer_type_expected=04008_E_Tipo ponteiro esperado, mas obtido "$1"
+% The variable or expression isn't of the type \var{pointer}. This
+% happens when you pass a variable that isn't a pointer to \var{New}
+% or \var{Dispose}.
+type_e_class_type_expected=04009_E_Tipo classe esperado, mas obtido "$1"
+% The variable or expression isn't of the type \var{class}. This happens
+% typically when
+% \begin{enumerate}
+% \item The parent class in a class declaration isn't a class.
+% \item An exception handler (\var{On}) contains a type identifier that
+% isn't a class.
+% \end{enumerate}
+type_e_cant_eval_constant_expr=04011_E_Impossível avaliar expressão constante
+% This error can occur when the bounds of an array you declared do
+% not evaluate to ordinal constants.
+type_e_set_element_are_not_comp=04012_E_Elementos conjunto não são compatíveis
+% You are trying to perform an operation on two sets, when the set element types
+% are not the same. The base type of a set must be the same when taking the
+% union.
+type_e_set_operation_unknown=04013_E_Operação não implementada para conjuntos
+% several binary operations are not defined for sets.
+% These include: \var{div}, \var{mod}, \var{**}, \var{>=} and \var{<=}.
+% The last two may be  defined for sets in the future.
+type_w_convert_real_2_comp=04014_W_Conversão automática de tipo de ponto flutuante para COMP que é um inteiro
+% An implicit type conversion from a real type to a \var{comp} is
+% encountered. Since \var{comp} is a 64 bit integer type, this may indicate
+% an error.
+type_h_use_div_for_int=04015_H_Use DIV como alternativa para obter um resultado inteiro
+% When hints are on, then an integer division with the '/' operator will
+% produce this message, because the result will then be of type real.
+type_e_strict_var_string_violation=04016_E_Tipos 'String' devem coincidir exatamente no modo $V+
+% When compiling in \var{\{\$V+\}} mode, the string you pass as a parameter
+% should be of the exact same type as the declared parameter of the procedure.
+type_e_succ_and_pred_enums_with_assign_not_possible=04017_E_'SUCC' ou 'PRED' não é possível em enumerações com atribuições
+% If you declare an enumeration type which has C-like assignments
+% in it, such as in the following:
+% \begin{verbatim}
+%   Tenum = (a,b,e:=5);
+% \end{verbatim}
+% then you cannot use the \var{Succ} or \var{Pred} functions with this enumeration.
+type_e_cant_read_write_type=04018_E_Impossível ler ou gravar variáveis deste tipo
+% You are trying to \var{read} or \var{write} a variable from or to a
+% file of type text, which doesn't support that variable's type.
+% Only integer types, reals, pchars and strings can be read from or
+% written to a text file. Booleans can only be written to text files.
+type_e_no_readln_writeln_for_typed_file=04019_E_Impossível usar 'readln' ou 'writeln' em arquivos tipados
+% \var{readln} and \var{writeln} are only allowed for text files.
+type_e_no_read_write_for_untyped_file=04020_E_Impossivel usar 'read' ou 'write' em arquivos não tipados.
+% \var{read} and \var{write} are only allowed for text or typed files.
+type_e_typeconflict_in_set=04021_E_Conflito de tipos entre elementos de conjunto
+% There is at least one set element which is of the wrong type, i.e. not of
+% the set type.
+type_w_maybe_wrong_hi_lo=04022_W_lo/hi(dword/qword) retorna 'upper/lower word/dword'
+% \fpc supports an overloaded version of \var{lo/hi} for \var{longint/dword/int64/qword}
+% which returns the lower/upper word/dword of the argument. \tp always uses
+% a 16 bit \var{lo/hi} which always returns bits 0..7 for \var{lo} and the
+% bits 8..15 for \var{hi}. If you want the \tp behavior you have
+% to type cast the argument to a \var{word} or \var{integer}.
+type_e_integer_or_real_expr_expected=04023_E_Expressão inteira ou real esperada
+% The first argument to \var{str} must be a real or integer type.
+type_e_wrong_type_in_array_constructor=04024_E_Tipo incorreto "$1" no construtor matriz
+% You are trying to use a type in an array constructor which is not
+% allowed.
+type_e_wrong_parameter_type=04025_E_Tipos incompatíveis para o arg. no. $1: Obtido "$2", esperado "$3"
+% You are trying to pass an invalid type for the specified parameter.
+type_e_no_method_and_procedure_not_compatible=04026_E_Método (variável) e Procedimento (variável) não são compatíveis
+% You can't assign a method to a procedure variable or a procedure to a
+% method pointer.
+type_e_wrong_math_argument=04027_E_Constante ilegal passada para função matemática interna
+% The constant argument passed to a \var{ln} or \var{sqrt} function is out of
+% the definition range of these functions.
+type_e_no_addr_of_constant=04028_E_Impossível obter o endereço de expressões constantes
+% It is not possible to get the address of a constant expression, because they
+% aren't stored in memory. You can try making it a typed constant. This error
+% can also be displayed if you try to pass a property to a var parameter.
+type_e_argument_cant_be_assigned=04029_E_Argumento não pode ser atribuído
+% Only expressions which can be on the left side of an
+% assignment can be passed as call by reference arguments.
+%
+% Remark: Properties can be used on the left side of an assignment,
+% nevertheless they cannot be used as arguments.
+type_e_cannot_local_proc_to_procvar=04030_E_Impossível atribuir procedimento/função local a variável procedimento
+% It's not allowed to assign a local procedure/function to a
+% procedure variable, because the calling convention of a local procedure/function is
+% different. You can only assign local procedure/function to a void pointer.
+type_e_no_assign_to_addr=04031_E_Impossível atribuir valores a um endereço
+% It is not allowed to assign a value to an address of a variable, constant,
+% procedure or function. You can try compiling with -So if the identifier
+% is a procedure variable.
+type_e_no_assign_to_const=04032_E_Impossível atribuir valors a uma variável constante
+% It's not allowed to assign a value to a variable which is declared
+% as a const. This is normally a parameter declared as const. To allow
+% changing the value, pass the parameter by value, or a parameter by reference
+% (using var).
+type_e_array_required=04033_E_Tipo matriz requerido
+% If you are accessing a variable using an index '[<x>]' then
+% the type must be an array. In FPC mode a pointer is also allowed.
+type_e_interface_type_expected=04034_E_Tipo interface esperado, mas obtido "$1"
+% The compiler expected to encounter an interface type name, but got something else.
+% The following code would produce this error:
+% \begin{verbatim}
+% Type
+%   TMyStream = Class(TStream,Integer)
+% \end{verbatim}
+type_h_mixed_signed_unsigned=04035_H_Misturando expressões assinadas e 'longwords' obtem-se um resultado de 64bits
+% If you divide (or calculate the modulus of) a signed expression by a longword (or vice versa),
+% or if you have overflow and/or range checking turned on and use an arithmetic
+% expression (+, -, *, div, mod) in which both signed numbers and longwords appear,
+% then everything has to be evaluated in 64-bit arithmetic which is slower than normal
+% 32-bit arithmetic. You can avoid this by typecasting one operand so it
+% matches the result type of the other one.
+type_w_mixed_signed_unsigned2=04036_W_Misturando expressões assinadas e cardinais pode causar um erro de verificação de faixa
+% If you use a binary operator (and, or, xor) and one of
+% the operands is a longword while the other one is a signed expression, then,
+% if range checking is turned on, you may get a range check error because in
+% such a case both operands are converted to longword before the operation is
+% carried out. You can avoid this by typecasting one operand so it
+% matches the result type of the other one.
+type_e_typecast_wrong_size_for_assignment=04037_E_Conversão de tipo tem tamanhos diferentes ($1 -> $2) na atribuição
+% Type casting to a type with a different size is not allowed when the variable is
+% used in an assignment.
+type_e_array_index_enums_with_assign_not_possible=04038_E_Enumerações com atribuições não podem ser usadas como índice de matrizes
+% When you declared an enumeration type which has C-like
+% assignments, such as in the following:
+% \begin{verbatim}
+%   Tenum = (a,b,e:=5);
+% \end{verbatim}
+% you cannot use it as the index of an array.
+type_e_classes_not_related=04039_E_Tipos Classe ou Objeto "$1" e "$2" não estão relacionados
+% There is a typecast from one class or object to another while the class/object
+% are not related. This will probably lead to errors.
+type_w_classes_not_related=04040_W_Tipos Classe "$1" e "$2" não estão relacionados
+% There is a typecast from one class to another while the classes
+% are not related. This will probably lead to errors.
+type_e_class_or_interface_type_expected=04041_E_Tipo classe ou interface esperado, mas obtido "$1"
+% The compiler expected a class or interface name, but got another type or identifier.
+type_e_type_is_not_completly_defined=04042_E_Tipo "$1" não está completamente definido
+% This error occurs when a type is not complete: i.e. a pointer type which points to
+% an undefined type.
+type_w_string_too_long=04043_W_Literal 'String' tem mais caracteres que comprimento 'string' curta
+% The size of the constant string, which is assigned to a shortstring,
+% is longer than the maximum size of the shortstring (255 characters).
+type_w_signed_unsigned_always_false=04044_W_Comparação será sempre falsa devido a faixa de valores
+% There is a comparison between an unsigned value and a signed constant which is
+% less than zero. Because of type promotion, the statement will always evaluate to
+% false. Explicitly typecast the constant to the correct range to avoid this problem.
+type_w_signed_unsigned_always_true=04045_W_Comparação será sempre verdadeira devido a faixa de valores
+% There is a comparison between an unsigned value and a signed constant which is
+% less than zero. Because of type promotion, the statement will always evaluate to
+% true. Explicitly typecast the constant to the correct range to avoid this problem.
+type_w_instance_with_abstract=04046_W_Construindo uma classe "$1" com método abstrato "$2"
+% An instance of a class is created which contains non-implemented abstract
+% methods. This will probably lead to a runtime error 211 in the code if that
+% routine is ever called. All abstract methods should be overriden.
+type_h_in_range_check=04047_H_O operador esquerdo em um operador 'IN' deve ser tamanho byte
+% The left operand of the \var{in} operator is not an ordinal or enumeration which fits
+% within 8 bits. This may lead to range check errors. The \var{in} operator
+% currently only supports a left operand which fits within a byte. In the case of
+% enumerations, the size of an element of an enumeration can be controlled with
+% the \var{\{\$PACKENUM\}} or \var{\{\$Zn\}} switches.
+type_w_smaller_possible_range_check=04048_W_Tamanho tipo incompatível, possível perda de dados / erro verificação faixa
+% There is an assignment to a smaller type than the source type. This means that
+% this may cause a range-check error, or may lead to possible loss of data.
+type_h_smaller_possible_range_check=04049_H_Tamanho tipo incompatível, possível perda de dados / erro verificação faixa
+% There is an assignment to a smaller type than the source type. This means that
+% this may cause a range-check error, or may lead to possible loss of data.
+type_e_cant_take_address_of_abstract_method=04050_E_O endereço de um método abstrato não pode ser obtido
+% An abstract method has no body, so the address of an abstract method can't be taken.
+type_e_assignment_not_allowed=04051_E_Atribuições à parâmetros formais e matrizes abertas não são possíveis
+% You are trying to assign a value to a formal (untyped var, const or out)
+% parameter, or to an open array.
+type_e_constant_expr_expected=04052_E_Expressão constante esperada
+% The compiler expects an constant expression, but gets a variable expression.
+type_e_operator_not_supported_for_types=04053_E_Operação "$1" não é suportada para os tipos "$2" e "$3"
+% The operation is not allowed for the supplied types.
+type_e_illegal_type_conversion=04054_E_Conversão de tipo ilegal: "$1" para "$2"
+% When doing a type-cast, you must take care that the sizes of the variable and
+% the destination type are the same.
+type_h_pointer_to_longint_conv_not_portable=04055_H_Conversão entre ordinais e ponteiros não é portável
+% If you typecast a pointer to a longint (or vice-versa), this code will not compile
+% on a machine using 64 bits addressing.
+type_w_pointer_to_longint_conv_not_portable=04056_W_Conversão entre ordinais e ponteiros não é portável
+% If you typecast a pointer to an ordinal type of a different size (or vice-versa), this can
+% cause problems. This is a warning to help in finding the 32-bit specific code where cardinal/longint is used
+% to typecast pointers to ordinals. A solution is to use the ptrint/ptruint types instead.
+type_e_cant_choose_overload_function=04057_E_Impossível determinar qual função sobrecarregada chamar
+% You're calling overloaded functions with a parameter that doesn't correspond
+% to any of the declared function parameter lists. e.g. when you have declared
+% a function with parameters \var{word} and \var{longint}, and then you call
+% it with a parameter which is of type \var{integer}.
+type_e_illegal_count_var=04058_E_Variável contador ilegal
+% The type of a \var{for} loop variable must be an ordinal type.
+% Loop variables cannot be reals or strings.
+type_w_double_c_varargs=04059_W_Convertendo constante valor real para 'double' para variável argumento C, adicione conversão de tipo explícita para evitar isso.
+% In C, constant real values are double by default. For this reason, if you
+% pass a constant real value to a variable argument part of a C function, FPC
+% by default converts this constant to double as well. If you want to prevent
+% this from happening, add an explicit typecast around the constant.
+type_e_class_or_cominterface_type_expected=04060_E_Tipo Classe ou interface COM esperado, mas obtido "$1"
+% Some operators, such as the AS operator, are only applicable to classes or COM interfaces.
+type_e_no_const_packed_array=04061_E_Matrizes constantes compactadas não são suportadas ainda
+% You cannot declare a (bit)packed array as a typed constant.
+type_e_got_expected_packed_array=04062_E_Tipos incompatíveis para arg. no. $1: Obtido "$2" esperado "Matriz compactada (Bits)"
+% The compiler expects a (bit)packed array as the specified parameter.
+type_e_got_expected_unpacked_array=04063_E_Tipos incompatíveis para arg. no. $1: Obtido "$2" esperado "Matriz (não compactada)"
+% The compiler expects a regular (i.e., not packed) array as the specified parameter.
+type_e_no_packed_inittable=04064_E_Elementos de matrizes compactadas não podem ser de um tipo que necessita ser inicializado
+% Support for packed arrays of types that need initialization
+% (such as ansistrings, or records which contain ansistrings) is not yet implemented.
+type_e_no_const_packed_record=04065_E_Registros constantes compactadas e objetos não são suportados ainda
+% You cannot declare a (bit)packed array as a typed constant at this time.
+type_w_untyped_arithmetic_unportable=04066_W_Aritmética "$1" em ponteiros não tipados não é portável {$T+}, sugere-se conversão de tipo
+% Addition/subtraction from an untyped pointer may work differently in \var{\{\$T+\}}.
+% Use a typecast to a typed pointer.
+type_e_cant_take_address_of_local_subroutine=04076_E_Impossível obter endereço de uma subrotina marcada como local
+% The address of a subroutine marked as local can't be taken.
+type_e_cant_export_local=04077_E_Impossível exportar subrotina marcada como local de uma unidade
+% A subroutine marked as local can't be exported from a unit.
+type_e_not_automatable=04078_E_Tipo não é automatizável: "$1"
+% Only byte, integer, longint, smallint, currency, single, double, ansistring,
+% widestring, tdatetime, variant, olevariant, wordbool and all interfaces are automatable.
+type_h_convert_add_operands_to_prevent_overflow=04079_H_Convertendo os operandos para "$1" antes de realizar a soma pode prevenir erros de transbordamento.
+% Adding two types can cause overflow errors. Since you are converting the result to a larger type, you
+% could prevent such errors by converting the operands to this type before doing the addition.
+type_h_convert_sub_operands_to_prevent_overflow=04080_H_Convertendo os operandos para "$1" antes de realizar a subtração pode prevenir erros de transbordamento.
+% Subtracting two types can cause overflow errors. Since you are converting the result to a larger type, you
+% could prevent such errors by converting the operands to this type before doing the subtraction.
+type_h_convert_mul_operands_to_prevent_overflow=04081_H_Convertendo os operados para "$1" antes de realizar a multiplicação pode prevenir erros de transbordamento.
+% Multiplying two types can cause overflow errors. Since you are converting the result to a larger type, you
+% could prevent such errors by converting the operands to this type before doing the multiplication.
+type_w_pointer_to_signed=04082_W_Convertendo ponteiros para inteiros assinados poe resultar em comparações de resultados incorretas e erros de faixa. Ao invés disso, use tipos não assinados.
+% The virtual address space on 32-bit machines runs from \$00000000 to \$ffffffff.
+% Many operating systems allow you to allocate memory above \$80000000.
+% For example both \windows and \linux allow pointers in the range \$0000000 to \$bfffffff.
+% If you convert pointers to signed types, this can cause overflow and range check errors,
+% but also \$80000000 < \$7fffffff. This can cause random errors in code like "if p>q".
+type_interface_has_no_guid=04083_E_Tipo interface $1 não tem um GUID válido
+% When applying the as-operator to an interface or class, the desired interface (i.e. the right operand of the
+% as-operator) must have a valid GUID.
+type_e_invalid_objc_selector_name=04084_E_Nome seletor inválido "$1"
+% An Objective-C selector cannot be empty, must be a valid identifier or a single colon,
+% and if it contains at least one colon it must also end in one.
+type_e_expected_objc_method_but_got=04085_E_Método Objective-C esperado, mas obtido $1
+% A selector can only be created for Objective-C methods, not for any other kind
+% of procedure/function/method.
+type_e_expected_objc_method=04086_E_Método Objective-C ou nome método constante esperados
+% A selector can only be created for Objective-C methods, either by specifying
+% the name using a string constant, or by using an Objective-C method identifier
+% that is visible in the current scope.
+type_e_no_type_info=04087_E_Nenhuma informação de tipo disponível para este tipo
+% Type information is not generated for some types, such as enumerations with gaps
+% in their value range (this includes enumerations whose lower bound is different
+% from zero).
+type_e_ordinal_or_string_expr_expected=04088_E_Ordinal ou expressão 'string' esperados
+% The expression must be an ordinal or string type.
+type_e_string_expr_expected=04089_E_Expressão 'string' esperada
+% The expression must be a string type.
+type_w_zero_to_nil=04090_W_Convertendo 0 para NIL
+% Use NIL rather than 0 when initialising a pointer. 
+type_e_protocol_type_expected=04091_E_Tipo protocolo Objective-C esperado, mas obtido "$1"
+% The compiler expected a protocol type name, but found something else.
+type_e_objc_type_unsupported=04092_E_O tipo "$1" não é suportado para interação com código Objective-C de tempo execução.
+% Objective-C makes extensive use of run time type information (RTTI). This format
+% is defined by the maintainers of the run time and can therefore not be adapted
+% to all possible Object Pascal types. In particular, types that depend on
+% reference counting by the compiler (such as ansistrings and certain kinds of
+% interfaces) cannot be used as fields of Objective-C classes, cannot be
+% directly passed to Objective-C methods, and cannot be encoded using \var{objc\_encode}.
+type_e_class_or_objcclass_type_expected=04093_E_Tipo classe ou 'objcclass' esperados, mas obtido "$1"
+% It is only possible to create class reference types of \var{class} and \var{objcclass}
+type_e_objcclass_type_expected=04094_E_Tipo 'Objcclass' esperado
+% The compiler expected an Objc
+% \var{objcclass} types
+%
+% \end{description}
+#
+# Symtable
+#
+# 05070 is the last used one
+#
+% \section{Symbol handling}
+% This section lists all the messages that concern the handling of symbols.
+% This means all things that have to do with procedure and variable names.
+% \begin{description}
+sym_e_id_not_found=05000_E_Identificador não encontrado "$1"
+% The compiler doesn't know this symbol. Usually happens when you misspell
+% the name of a variable or procedure, or when you forget to declare a
+% variable.
+sym_f_internal_error_in_symtablestack=05001_F_Erro interno em SymTableStack()
+% An internal error occurred in the compiler; If you encounter such an error,
+% please contact the developers and try to provide an exact description of
+% the circumstances in which the error occurs.
+sym_e_duplicate_id=05002_E_Identificador duplicado "$1"
+% The identifier was already declared in the current scope.
+sym_h_duplicate_id_where=05003_H_Identificador já definido em $1 na linha $2
+% The identifier was already declared in a previous scope.
+sym_e_unknown_id=05004_E_Identificador desconhecido "$1"
+% The identifier encountered has not been declared, or is used outside the
+% scope where it is defined.
+sym_e_forward_not_resolved=05005_E_Declaração posterior não resolvida "$1"
+% This can happen in two cases:
+% \begin{itemize}
+% \item You declare a function in the \var{interface} part, or
+% with a \var{forward} directive, but do not implement it.
+% \item You reference a type which isn't declared in the current \var{type}
+% block.
+% \end{itemize}
+sym_e_error_in_type_def=05007_E_Erro na definição de tipo
+% There is an error in your definition of a new array type.
+% One of the range delimiters in an array declaration is erroneous.
+% For example, \var{Array [1..1.25]} will trigger this error.
+sym_e_forward_type_not_resolved=05009_E_Tipo posterior não resolvido "$1"
+% A symbol was forward defined, but no declaration was encountered.
+sym_e_only_static_in_static=05010_E_Apenas variáveis estáticas podem ser usadas em métodos estáticos ou métodos externos
+% A static method of an object can only access static variables.
+sym_f_type_must_be_rec_or_class=05012_F_Tipo registro ou classe esperados
+% The variable or expression isn't of the type \var{record} or \var{class}.
+sym_e_no_instance_of_abstract_object=05013_E_Instâncias de classes ou objetos com métodos abstratos não são permitidas
+% You are trying to generate an instance of a class which has an abstract
+% method that wasn't overridden.
+sym_w_label_not_defined=05014_W_Rótulo não definido "$1"
+% A label was declared, but not defined.
+sym_e_label_used_and_not_defined=05015_E_Rótulo usado mas não definido "$1"
+% A label was declared and used, but not defined.
+sym_e_ill_label_decl=05016_E_Declaração rótulo ilegal
+% This error should never happen; it occurs if a label is defined outside a
+% procedure or function.
+sym_e_goto_and_label_not_supported=05017_E_GOTO e LABEL não são suportados (use a chave -Sg)
+% You must use the -Sg switch to compile a program which has \var{label}s
+% and \var{goto} statements. By default, \var{label} and \var{goto} aren't
+% supported.
+sym_e_label_not_found=05018_E_Rótulo não encontrado
+% A \var{goto label} was encountered, but the label wasn't declared.
+sym_e_id_is_no_label_id=05019_E_Identificador não é um rótulo
+% The identifier specified after the \var{goto} isn't of type label.
+sym_e_label_already_defined=05020_E_Rótulo já definido
+% You are defining a label twice. You can define a label only once.
+sym_e_ill_type_decl_set=05021_E_Declaração de tipo de conjunto de elementos ilegal
+% The declaration of a set contains an invalid type definition.
+sym_e_class_forward_not_resolved=05022_E_Declaração posterior de classe não resolvida "$1"
+% You declared a class, but you did not implement it.
+sym_n_unit_not_used=05023_H_Unidade "$1" não usada em $2
+% The unit referenced in the \var{uses} clause is not used.
+sym_h_para_identifier_not_used=05024_H_Parâmetro "$1" não usado
+% The identifier was declared (locally or globally) but
+% was not used (locally or globally).
+sym_n_local_identifier_not_used=05025_N_Variável local "$1" não usada
+% You have declared, but not used, a variable in a procedure or function
+% implementation.
+sym_h_para_identifier_only_set=05026_H_Valor parâmetro "$1" é atribuído mas nunca usado
+% The identifier was declared (locally or globally) and
+% assigned to, but is not used (locally or globally) after the assignment.
+sym_n_local_identifier_only_set=05027_N_Variável local "$1" é atribuída mas nunca usada
+% The variable in a procedure or function implementation is declared and
+% assigned to, but is not used after the assignment.
+sym_h_local_symbol_not_used=05028_H_Local $1 "$2" não é usado
+% A local symbol is never used.
+sym_n_private_identifier_not_used=05029_N_Campo privado "$1.$2" nunca usado
+% The indicated private field is defined, but is never used in the code.
+sym_n_private_identifier_only_set=05030_N_Campo privado "$1.$2" é atribuído mas nunca usado
+% The indicated private field is declared and assigned to, but never read.
+sym_n_private_method_not_used=05031_N_Método privado "$1.$2" nunca usado
+% The indicated private method is declared but is never used in the code.
+sym_e_set_expected=05032_E_Tipo conjunto esperado
+% The variable or expression is not of type \var{set}. This happens in an
+% \var{in} statement.
+sym_w_function_result_not_set=05033_W_Retorno da função parece não ter sido ajustado
+% You can get this warning if the compiler thinks that a function return
+% value is not set. This will not be displayed for assembler procedures,
+% or procedures that contain assembler blocks.
+sym_w_wrong_C_pack=05034_W_Tipo "$1" não está alinhado corretamente no atual registro para C
+% Arrays with sizes not multiples of 4 will be wrongly aligned
+% for C structures.
+sym_e_illegal_field=05035_E_Identificador de campo de registro desconhecido "$1"
+% The field doesn't exist in the record/object definition.
+sym_w_uninitialized_local_variable=05036_W_Variável local "$1" não parece ter sido inicializada
+% This message is displayed if the compiler thinks that a variable will
+% be used (i.e. it appears in the right-hand side of an expression) when it
+% was not initialized first (i.e. appeared in the left-hand side of an
+% assignment).
+sym_w_uninitialized_variable=05037_W_Variável "$1" parece não ter sido inicializada
+% This message is displayed if the compiler thinks that a variable will
+% be used (i.e. it appears in the right-hand side of an expression) when it
+% was not initialized first (i.e. appeared in the left-hand side of an
+% assignment).
+sym_e_id_no_member=05038_E_Identificador não identifica nenhum membro "$1"
+% This error is generated when an identifier of a record,
+% field or method is accessed while it is not defined.
+sym_h_param_list=05039_H_Declaração encontrada: $1
+% You get this when you use the \var{-vh} switch.In the case of an overloaded procedure
+% not being found. Then all candidate overloaded procedures are
+% listed, with their parameter lists.
+sym_e_segment_too_large=05040_E_Elemento de dados muito grande
+% You get this when you declare a data element whose size exceeds the
+% prescribed limit (2 Gb on 80386+/68020+ processors).
+sym_e_no_matching_implementation_found=05042_E_Nenhuma implementação coincidente para método interface "$1" encontrada
+% There was no matching method found which could implement the interface
+% method. Check argument types and result type of the methods.
+sym_w_deprecated_symbol=05043_W_Símbolo "$1" está depreciado
+% This means that a symbol (a variable, routine, etc...) which is
+% declared as \var{deprecated} is used. Deprecated symbols may no longer
+% be available in newer versions of the unit / library. Use of this symbol
+% should be avoided as much as possible.
+sym_w_non_portable_symbol=05044_W_Símbolo "$1" não é portável
+% This means that a symbol (a variable, routine, etc...) which is
+% declared as \var{platform} is used. This symbol's value, use
+% and availability is platform specific and should not be used
+% if the source code must be portable.
+sym_w_non_implemented_symbol=05055_W_Símbolo "$1" não está implementado
+% This means that a symbol (a variable, routine, etc...) which is
+% declared as \var{unimplemented} is used. This symbol is defined,
+% but is not yet implemented on this specific platform.
+sym_e_cant_create_unique_type=05056_E_Impossível criar tipo único para este tipo
+% Only simple types like ordinal, float and string types are supported when
+% redefining a type with \var{type newtype = type oldtype;}.
+sym_h_uninitialized_local_variable=05057_H_Variável local "$1" parece não ter sido inicializada
+% This message is displayed if the compiler thinks that a variable will
+% be used (i.e. it appears in the right-hand side of an expression) when it
+% was not initialized first (i.e. it did not appear in the left-hand side of an
+% assignment).
+sym_h_uninitialized_variable=05058_H_Variável "$1" parece não ter sido inicializada
+% This message is displayed if the compiler thinks that a variable will
+% be used (i.e. it appears in the right-hand side of an expression) when it
+% was not initialized first (i.e. t did not appear in the left-hand side of an
+% assignment).
+sym_w_function_result_uninitialized=05059_W_Variável de retorno da função parece não ter sido inicializada
+% This message is displayed if the compiler thinks that the function result
+% variable will be used (i.e. it appears in the right-hand side of an expression)
+% before it is initialized (i.e. before it appeared in the left-hand side of an
+% assignment).
+sym_h_function_result_uninitialized=05060_H_Variável de retorno da função parece não ter sido inicializada
+% This message is displayed if the compiler thinks that the function result
+% variable will be used (i.e. it appears in the right-hand side of an expression)
+% before it is initialized (i.e. it appears in the left-hand side of an
+% assignment)
+sym_w_identifier_only_read=05061_W_Variável "$1" lida mas não atribuída em lugar algum
+% You have read the value of a variable, but nowhere assigned a value to
+% it.
+sym_h_abstract_method_list=05062_H_Método abstrato encontrado: $1
+% When getting a warning about constructing a class/object with abstract methods
+% you get this hint to assist you in finding the affected method.
+sym_w_experimental_symbol=05063_W_Símbolo "$1" é experimental
+% This means that a symbol (a variable, routine, etc...) which is
+% declared as \var{experimental} is used. Experimental symbols
+% might disappear or change semantics in future versions. Usage of this symbol
+% should be avoided as much as possible.
+sym_w_forward_not_resolved=05064_W_Declaração posterior "$1" não resolvida, assumida como externa
+% This happens if you declare a function in the \var{interface} of a unit in macpas mode,
+% but do not implement it.
+sym_w_library_symbol=05065_W_Símbolo "$1" pertence a uma biblioteca
+% This means that a symbol (a variable, routine, etc...) which is
+% declared as \var{library} is used. Library symbols may not be
+% available in other libraries.
+sym_w_deprecated_symbol_with_msg=05066_W_Símbolo "$1" está depreciado: "$2"
+% This means that a symbol (a variable, routine, etc...) which is
+% declared as \var{deprecated} is used. Deprecated symbols may no longer
+% be available in newer versions of the unit / library. Use of this symbol
+% should be avoided as much as possible.
+sym_e_no_enumerator=05067_E_Impossível encontrar um enumerador para o tipo "$1"
+% This means that compiler can not find an apropriate enumerator to use in the for-in loop.
+% To create an enumerator you need to defind an operator enumerator or add a public or published 
+% GetEnumerator method to the class or object definition.
+sym_e_no_enumerator_move=05068_E_Impossível encontrar um método "MoveNext" no enumerador "$1"
+% This means that compiler can not find a public MoveNext method with the Boolean return type in
+% the enumerator class or object definition.
+sym_e_no_enumerator_current=05069_E_Impossível encontrar uma propriedade "Current" no enumerador "$1"
+% This means that compiler can not find a public Current property in  the enumerator class or object 
+% definition.
+sym_e_objc_para_mismatch=05070_E_Incompatibilidade entre número de parâmetros declarados e número de dois pontos (:) na 'string' mensagem.
+% In Objective-C, a message name automatically contains as many colons as parameters.
+% In order to prevent mistakes when specifying the message name in FPC, the compiler
+% checks whether this is also the case here. Note that in case of messages taking a
+% variable number of arguments translated to FPC via an \var{array of const} parameter,
+% this final \var{array of const} parameter is not counted. Neither are the hidden
+% \var{self} and \var{\_cmd} parameters.
+% \end{description}
+#
+# Codegenerator
+#
+# 06049 is the last used one
+#
+% \section{Code generator messages}
+% This section lists all messages that can be displayed if the code
+% generator encounters an error condition.
+% \begin{description}
+cg_e_parasize_too_big=06009_E_Tamanho da lista de parâmetros excede 65535 bytes
+% The I386 processor limits the parameter list to 65535 bytes. (The \var{RET}
+% instruction causes this.)
+cg_e_file_must_call_by_reference=06012_E_Tipos Arquivos devem ser parâmetros var.
+% You cannot specify files as value parameters, i.e., they must always be
+% declared \var{var} parameters.
+cg_e_cant_use_far_pointer_there=06013_E_O uso de ponteiro distante não é permitido lá
+% Free Pascal doesn't support far pointers, so you cannot take the address of
+% an expression which has a far reference as a result. The \var{mem} construct
+% has a far reference as a result, so the following code will produce this
+% error:
+% \begin{verbatim}
+% var p : pointer;
+% ...
+% p:=@mem[a000:000];
+% \end{verbatim}
+cg_e_dont_call_exported_direct=06015_E_Funções 'EXPORT' declaradas não podem ser chamadas
+% No longer in use.
+cg_w_member_cd_call_from_method=06016_W_Possível chamada ilegal de construtor ou destruidor
+% The compiler detected that a constructor or destructor is called within a
+% a method. This will probably lead to problems, since constructors / destructors
+% require parameters on entry.
+cg_n_inefficient_code=06017_N_Códio ineficiente
+% Your statement seems dubious to the compiler.
+cg_w_unreachable_code=06018_W_Código inacessível
+% You specified a construct which will never be executed. Example:
+% \begin{verbatim}
+% while false do
+%   begin
+%   {.. code ...}
+%   end;
+% \end{verbatim}
+cg_e_cant_call_abstract_method=06020_E_Métodos abstratos não podem ser chamados diretamente
+% You cannot call an abstract method directly. Instead, you must call an
+% overriding child method, because an abstract method isn't implemented.
+cg_d_register_weight=06027_DL_Registro $1 peso $2 $3
+% Debugging message. Shown when the compiler considers a variable for
+% keeping in the registers.
+cg_d_stackframe_omited=06029_DL_Quadro da pilha é omitido
+% Some procedure/functions do not need a complete stack-frame, so it is omitted.
+% This message will be displayed when the {-vd} switch is used.
+cg_e_unable_inline_object_methods=06031_E_Objeto ou métodos classe não podem ser 'em linha'.
+% You cannot have inlined object methods.
+cg_e_unable_inline_procvar=06032_E_Chamadas 'Procvar' não podem ser 'em linha'.
+% A procedure with a procedural variable call cannot be inlined.
+cg_e_no_code_for_inline_stored=06033_E_Nenhum código para procedimento 'em linha' armazenado
+% The compiler couldn't store code for the inline procedure.
+cg_e_can_access_element_zero=06035_E_Elemento zero de uma 'ansi/wide-' ou stringlonga pode ser acessado, usar '(set)length'
+% You should use \var{setlength} to set the length of an ansi/wide/longstring
+% and \var{length} to get the length of such string type.
+cg_e_cannot_call_cons_dest_inside_with=06037_E_Construtores ou destruidores não podem ser chamados de dentro de uma cláusula 'with'
+% Inside a \var{with} clause you cannot call a constructor or destructor for the
+% object you have in the \var{with} clause.
+cg_e_cannot_call_message_direct=06038_E_Impossível chamar métodos manipuladores de mensagem diretamente
+% A message method handler method cannot be called directly if it contains an
+% explicit \var{Self} argument.
+cg_e_goto_inout_of_exception_block=06039_E_Salto interno ou externo a um bloco de exceção
+% It is not allowed to jump in or outside of an exception block like \var{try..finally..end;}.
+% For example, the following code will produce this error:
+
+% \begin{verbatim}
+% label 1;
+%
+% ...
+%
+% try
+%    if not(final) then
+%      goto 1;   // this line will cause an error
+% finally
+%   ...
+% end;
+% 1:
+% ...
+% \end{verbatim}
+cg_e_control_flow_outside_finally=06040_E_Instruções de controle de fluxo não são permitidos em um bloco 'finally'
+% It isn't allowed to use the control flow statements \var{break},
+% \var{continue} and \var{exit}
+% inside a finally statement. The following example shows the problem:
+% \begin{verbatim}
+% ...
+%   try
+%      p;
+%   finally
+%      ...
+%      exit;  // This exit ISN'T allowed
+%   end;
+% ...
+%
+% \end{verbatim}
+% If the procedure \var{p} raises an exception the finally block is
+% executed. If the execution reaches the exit, it's unclear what to do:
+% exit the procedure or search for another exception handler.
+cg_w_parasize_too_big=06041_W_Tamanho parâmetros excede limite para certas CPU's
+% This indicates that you are declaring more than 64K of parameters, which
+% might not be supported on other processor targets.
+cg_w_localsize_too_big=06042_W_Tamanho variável local excede limite para certas CPU's
+% This indicates that you are declaring more than 32K of local variables, which
+% might not be supported on other processor targets.
+cg_e_localsize_too_big=06043_E_Tamanho variáveis locais excedem limites suportados
+% This indicates that you are declaring more than 32K of local variables, which
+% is not supported by this processor.
+cg_e_break_not_allowed=06044_E_BREAK não permitido
+% You're trying to use \var{break} outside a loop construction.
+cg_e_continue_not_allowed=06045_E_CONTINUE não permitido
+% You're trying to use \var{continue} outside a loop construction.
+cg_f_unknown_compilerproc=06046_F_'Compilerproc' desconhecido "$1". Verifique se você usa a biblioteca de tempo de execução correta
+% The compiler expects that the runtime library contains certain subroutines. If you see this error
+% and you didn't change the runtime library code, it's very likely that the runtime library
+% you're using doesn't match the compiler in use. If you changed the runtime library this error means
+% that you removed a subroutine which the compiler needs for internal use.
+cg_f_unknown_system_type=06047_F_Impossível encontrar tipo sistema "$1". Verifique se você usa a biblioteca de tempo de execução correta
+% The compiler expects that the runtime library contains certain type definitions. If you see this error
+% and you didn't change the runtime library code, it's very likely that the runtime library
+% you're using doesn't match the compiler in use. If you changed the runtime library this error means
+% that you removed a type which the compiler needs for internal use.
+cg_h_inherited_ignored=06048_H_Chamada herdada para método abstrato ignorada
+% This message appears only in Delphi mode when you call an abstract method
+% of a parent class via \var{inherited;}. The call is then ignored.
+cg_e_goto_label_not_found=06049_E_Rótulo 'Goto' "$1" não definido ou eliminado pela otimização
+% The label used in the goto definition is not defined or optimized away by the
+% unreachable code elemination.
+% \end{description}
+cg_f_unknown_type_in_unit=06050_F_Impossível encontrar o tipo "$1" na unidade "$2". Verifique se você usa a biblioteca de tempo de execução correta.
+% The compiler expects that the runtime library contains certain type definitions. If you see this error
+% and you didn't change the runtime library code, it's very likely that the runtime library
+% you're using doesn't match the compiler in use. If you changed the runtime library this error means
+% that you removed a type which the compiler needs for internal use.
+# EndOfTeX
+
+#
+# Assembler reader
+#
+# 07109 is the last used one
+#
+asmr_d_start_reading=07000_DL_Iniciando $1 análise estilo assembler
+% This informs you that an assembler block is being parsed
+asmr_d_finish_reading=07001_DL_Finalizada $1 análise estilo assembler
+% This informs you that an assembler block has finished.
+asmr_e_none_label_contain_at=07002_E_Padrão não-rótulo contêm @
+% A identifier which isn't a label can't contain a @.
+asmr_e_building_record_offset=07004_E_Erro construindo deslocamento registro
+% There has an error occured while building the offset of a record/object
+% structure, this can happend when there is no field specified at all or
+% an unknown field identifier is used.
+asmr_e_offset_without_identifier=07005_E_'OFFSET' usado sem identificador
+% You can only use OFFSET with an identifier. Other syntaxes aren't
+% supported
+asmr_e_type_without_identifier=07006_E_'TYPE' usado sem identificador
+% You can only use TYPE with an identifier. Other syntaxes aren't
+% supported
+asmr_e_no_local_or_para_allowed=07007_E_Impossível usar variável local ou parâmetro aqui
+% You can't use a local variable or parameter here, mostly because the
+% addressing of locals and parameters is done using the frame pointer register so the
+% address can't be obtained directly.
+asmr_e_need_offset=07008_E_Necessário usar 'OFFSET' aqui
+% You need to use OFFSET <id> here to get the address of the identifier.
+asmr_e_need_dollar=07009_E_Necessário usar $ aqui
+% You need to use $<id> here to get the address of the identifier.
+asmr_e_cant_have_multiple_relocatable_symbols=07010_E_Impossível usar múltiplos símbolos relocáveis
+% You can't have more than one relocatable symbol (variable/typed constant)
+% in one argument.
+asmr_e_only_add_relocatable_symbol=07011_E_Símbolo relocável pode apenas ser adicionado
+% Relocatable symbols (variable/typed constant) can't be used with other
+% operators. Only addition is allowed.
+asmr_e_invalid_constant_expression=07012_E_Expressão constante inválida
+% There is an error in the constant expression.
+asmr_e_relocatable_symbol_not_allowed=07013_E_Símbolo relocável não é permitido
+% You can't use a relocatable symbol (variable/typed constant) here.
+asmr_e_invalid_reference_syntax=07014_E_Sintaxe referência inválida
+% There is an error in the reference.
+asmr_e_local_para_unreachable=07015_E_Você não pode atingir $1 a partir desse código
+% You can not read directly the value of a local variable or parameter
+% of a higher level procedure in assembler code (except for
+% local assembler code without parameter nor locals).
+asmr_e_local_label_not_allowed_as_ref=07016_E_Símbolos locais/rótulos não são permitidos como referências
+% You can't use local symbols/labels as references
+asmr_e_wrong_base_index=07017_E_Uso registro base e índice inválido
+% There is an error with the base and index register, they are
+% probably incorrect
+asmr_w_possible_object_field_bug=07018_W_Possível erro na manipulação de campo de objeto
+% Fields of objects or classes can be reached directly in normal or objfpc
+% modes but TP and Delphi modes treat the field name as a simple offset.
+asmr_e_wrong_scale_factor=07019_E_Fator incorreto de escala especificado
+% The scale factor given is wrong, only 1,2,4 and 8 are allowed
+asmr_e_multiple_index=07020_E_Uso múltiplo registro índice
+% You are trying to use more than one index register
+asmr_e_invalid_operand_type=07021_E_Tipo operando inválido
+% The operand type doesn't match with the opcode used
+asmr_e_invalid_string_as_opcode_operand=07022_E_'String' inválido como operando 'opcode': $1
+% The string specified as operand is not correct with this opcode
+asmr_w_CODE_and_DATA_not_supported=07023_W_@CODE e @DATA não suportados
+% @CODE and @DATA are unsupported and are ignored.
+asmr_e_null_label_ref_not_allowed=07024_E_Referências nulas de rótulos não são permitidas
+asmr_e_expr_zero_divide=07025_E_Divisão por zero em avaliador asm
+% There is a division by zero in a constant expression
+asmr_e_expr_illegal=07026_E_Expressao ilegal
+% There is an illegal expression in a constant expression
+asmr_e_escape_seq_ignored=07027_E_Sequência de escape ignorada: $1
+% There is a C-styled string, but the escape sequence in the string
+% is unknown, and is therefore ignored
+asmr_e_invalid_symbol_ref=07028_E_Referência símbolo inválida
+asmr_w_fwait_emu_prob=07029_W_Fwait pode causar problemas de emulação com emu387
+asmr_w_fadd_to_faddp=07030_W_$1 sem operando traduzido em $1P
+asmr_w_enter_not_supported_by_linux=07031_W_Instrução 'ENTER' não suportada pelo kernel Linux
+% ENTER instruction can generate a stack page fault that is not
+% caught correctly by the i386 Linux page handler.
+asmr_w_calling_overload_func=07032_W_Chamando uma função sobrecarregada em assembler
+% There is a call to an overloaded method in the assembler block,
+% this might be the sign there is a problem
+asmr_e_unsupported_symbol_type=07033_E_Tipo símbolo não suportado para operando
+asmr_e_constant_out_of_bounds=07034_E_Valor constante fora de faixa
+asmr_e_error_converting_decimal=07035_E_Erro convertendo decimal $1
+% A constant decimal value does not have the correct syntax
+asmr_e_error_converting_octal=07036_E_Erro convertendo octal $1
+% A constant octal value does not have the correct syntax
+asmr_e_error_converting_binary=07037_E_Erro convertendo binário $1
+% A constant binary value does not have the correct syntax
+asmr_e_error_converting_hexadecimal=07038_E_Erro convertendo hexadecimal $1
+% A constant hexadecimal value does not have the correct syntax
+asmr_h_direct_global_to_mangled=07039_H_$1 traduzido para $2
+asmr_w_direct_global_is_overloaded_func=07040_W_$1 está associado a uma função sobrecarregada
+asmr_e_cannot_use_SELF_outside_a_method=07041_E_Impossível usar 'SELF' fora de um método
+% There is a reference to the \var{self} symbol while it is not
+% allowed. \var{self} can only be referenced inside methods
+asmr_e_cannot_use_OLDEBP_outside_nested_procedure=07042_E_Impossível usar 'OLDEBP' fora de um procedimento aninhado
+% There is a reference to the \var{oldebp} symbol while it is not
+% allowed. \var{oldebp} can only be referenced inside nested routines
+asmr_e_void_function=07043_W_Procedimentos não podem retornar qualquer valor em código asm
+% Trying to return a value while in a procedure. A procedure
+% does not have any return value
+asmr_e_SEG_not_supported=07044_E_SEG não suportado
+asmr_e_size_suffix_and_dest_dont_match=07045_E_Tamanho sufixo e tamanho destino ou fonte não coincidem
+% The register size and the opcode size suffix don't match. This is
+% probably an error in the assembler statement
+asmr_w_size_suffix_and_dest_dont_match=07046_W_Tamanho sufixo e tamanho destino ou fonte não coincidem
+% The register size and the opcode size suffix don't match. This is
+% probably an error in the assembler statement
+asmr_e_syntax_error=07047_E_Erro de sintaxe assembler
+% There is an assembler syntax error
+asmr_e_invalid_opcode_and_operand=07048_E_Combinação inválida de 'opcode' e operandos
+% The opcode cannot be used with this type of operand
+asmr_e_syn_operand=07049_E_Erro de sintaxe assembler em operando
+asmr_e_syn_constant=07050_E_Erro de sintaxe assembler em constante
+asmr_e_invalid_string_expression=07051_E_Expressão 'String' inválida
+asmr_w_const32bit_for_address=07052_W_Constante com símbolo $1 para endereço que não está em um ponteiro
+% A constant expression represents an address which does not fit
+% into a pointer. The address is probably incorrect
+asmr_e_unknown_opcode=07053_E_'Opcode' desconhecido $1
+% This opcode is not known
+asmr_e_invalid_or_missing_opcode=07054_E_'Opcode' inválido ou faltando
+asmr_e_invalid_prefix_and_opcode=07055_E_Combinação inválida de prefixo e 'opcode': $1
+asmr_e_invalid_override_and_opcode=07056_E_Combinação inválida de 'override' e 'opcode': $1
+asmr_e_too_many_operands=07057_E_Muitos operandos na linha
+% There are too many operands for this opcode. Check your
+% assembler syntax
+asmr_w_near_ignored=07058_W_NEAR ignorado
+asmr_w_far_ignored=07059_W_FAR ignorado
+asmr_e_dup_local_sym=07060_E_Símbolo local duplicado $1
+asmr_e_unknown_local_sym=07061_E_Símbolo local indefinido $1
+asmr_e_unknown_label_identifier=07062_E_Identificador rótulo desconhecido $1
+asmr_e_invalid_register=07063_E_Nome registro inválido
+% There is an unknown register name used as operand.
+asmr_e_invalid_fpu_register=07064_E_Nome registro ponto flutuante inválido
+% There is an unknown register name used as operand.
+asmr_w_modulo_not_supported=07066_W_Módulo não suportado
+asmr_e_invalid_float_const=07067_E_Constante ponto flutuante inválida $1
+% The floating point constant declared in an assembler block is
+% invalid.
+asmr_e_invalid_float_expr=07068_E_Expressão ponto flutuante inválida
+% The floating point expression declared in an assembler block is
+% invalid.
+asmr_e_wrong_sym_type=07069_E_Tipo símbolo incorreto
+asmr_e_cannot_index_relative_var=07070_E_Impossível indexar uma var. local ou parâmetro com um registro
+% Trying to index using a base register a symbol which is already relative
+% to a register. This is not possible, and will probably lead to crashes.
+asmr_e_invalid_seg_override=07071_E_Expressão sobreposição segmento inválida
+asmr_w_id_supposed_external=07072_W_Identificador $1 supostamente externo
+% There is a reference to an undefined symbol. This will not result
+% in an error, since the symbol might be external, but may cause
+% problems at link time if the symbol is not defined anywhere.
+asmr_e_string_not_allowed_as_const=07073_E_'Strings' não permitidas como constantes
+% Character strings are not allowed as constants.
+asmr_e_no_var_type_specified=07074_Nenhum tipo de variável especificado
+% The syntax expects a type idenfitifer after the dot, but
+% none was found.
+asmr_w_assembler_code_not_returned_to_text=07075_E_Código assembler não retornou a seção texto
+% There was a directive in the assembler block to change sections,
+% but there is a missing return to the text section at the end
+% of the assembler block. This might cause errors during link time.
+asmr_e_not_directive_or_local_symbol=07076_E_Não é uma diretiva ou símbolo local $1
+% This symbol is unknown.
+asmr_w_using_defined_as_local=07077_E_Usando um nome definido como um rótulo local
+asmr_e_dollar_without_identifier=07078_E_Caracter Dólar é usado sem um identificador
+% A constant expression has an identifier which does not start with
+% the $ symbol.
+asmr_w_32bit_const_for_address=07079_W_Constante 32bit criada para endereço
+% A constant was used as an address. This is probably an error,
+% since using absolute addresses will probably not work.
+asmr_n_align_is_target_specific=07080_N_'.align' é específico de alvo, use '.balign' ou '.p2align'
+% Using the .align directive is platform specific, and its meaning will vary
+% from one platform to another.
+asmr_e_cannot_access_field_directly_for_parameters=07081_E_Impossível acessar campos diretamente para parâmetros
+% You should load the parameter first into a register and then access the
+% fields using that register.
+asmr_e_cannot_access_object_field_directly=07082_E_Impossível acessar campos de objetos/classes diretamente
+% You should load the self pointer first into a register and then access the
+% fields using the register as base. By default the self pointer is available
+% in the esi register on i386.
+asmr_e_unable_to_determine_reference_size=07083_E_Tamanho não especificado e incapaz de determinar o tamanho dos operandos
+% You should specify explicitly a size for the reference, because
+% the compiler is unable to determine what size (byte,word,dword,etc.) it
+% should use for the reference.
+asmr_e_cannot_use_RESULT_here=07084_E_Impossível usar 'RESULT' nesta função
+% Some functions which return complex types cannot use the \var{result}
+% keyword.
+asmr_w_adding_explicit_args_fXX=07086_W_"$1" sem operando traduzido em "$1 %st,%st(1)"
+asmr_w_adding_explicit_first_arg_fXX=07087_W_"$1 %st(n)" traduzido em "$1 %st,%st(n)"
+asmr_w_adding_explicit_second_arg_fXX=07088_W_"$1 %st(n)" translated em "$1 %st(n),%st"
+asmr_e_invalid_char_smaller=07089_E_Caracter < não permitido aqui
+% The shift operator requires the << characters. Only one
+% of those characters was found.
+asmr_e_invalid_char_greater=07090_E_Caracter > não permitido aqui
+% The shift operator requires the >> characters. Only one
+% of those characters was found.
+asmr_w_align_not_supported=07093_W_ALIGN não suportado
+asmr_e_no_inc_and_dec_together=07094_E_'Inc' e 'Dec' não podem estar juntos
+% Trying to use an increment and a decrement within the same
+% opcode on the 680x0. This is impossible.
+asmr_e_invalid_reg_list_in_movem=07095_E_'Reglist' para 'movem' inválido
+% Trying to use the \var{movem} opcode with invalid registers
+% to save or restore.
+asmr_e_invalid_reg_list_for_opcode=07096_E_'Reglist' inválido para 'opcode'
+asmr_e_higher_cpu_mode_required=07097_E_Modo CPU maior requerido ($1)
+% Trying to use an instruction which is not supported in the current
+% cpu mode. Use a higher cpu generation to be able to use this
+% opcode in your assembler block
+asmr_w_unable_to_determine_reference_size_using_dword=07098_W_Nenhum tamanho especificado e incapaz de determinar o tamanho dos operandos, usando DWORD como padrão
+% You should specify explicitly a size for the reference, because
+% the compiler is unable to determine what size (byte,word,dword,etc.) it
+% should use for the reference. This warning is only used in Delphi mode where
+% it falls back to use DWORD as default.
+asmr_e_illegal_shifterop_syntax=07099_E_Erro de sintaxe tentando analisar um operando deslocamento
+% ARM only; ARM assembler supports a so called shifter operand. The used syntax isn't
+% a valid shifter operand. Example for an operation with shifter operand:
+% \begin{verbatim}
+% asm
+%   orr     r2,r2,r2,lsl #8
+% end;
+% \end{verbatim}
+asmr_e_packed_element=07100_E_Endereço de componente compactado não está no limite byte
+% Packed components (record fields and array elements) may start at an arbitrary
+% bit inside a byte. On CPU which do not support bit-addressable memory (which
+% includes all currently supported CPUs by FPC) you will therefore get an error
+% message when trying to index arrays with elements whose size is not a multiple
+% of 8 bits. The same goes for accessing record fields with such an address.
+% multiple of 8 bits.
+asmr_w_unable_to_determine_reference_size_using_byte=07101_W_Nenhum tamanho especificado e incapaz de determinar o tamanho dos operandos, usando BYTE como padrão
+% You should specify explicitly a size for the reference, because
+% the compiler is unable to determine what size (byte,word,dword,etc.) it
+% should use for the reference. This warning is only used in Delphi mode where
+% it falls back to use BYTE as default.
+asmr_w_no_direct_ebp_for_parameter=07102_W_Uso de '+offset(%ebp)' para parâmetros inválido aqui
+% Using direct 8(%ebp) reference for function/procedure parameters is invalid
+% if parameters are in registers.
+asmr_w_direct_ebp_for_parameter_regcall=07103_W_Uso de '+offset(%ebp)' não é compatível com a convenção 'regcall'
+% Using direct 8(%ebp) reference for function/procedure parameters is invalid
+% if parameters are in registers.
+asmr_w_direct_ebp_neg_offset=07104_W_Uso de '-offset(%ebp)' não é recomendada para acesso a variável local
+% Using -8(%ebp) to access a local variable is not recommended
+asmr_w_direct_esp_neg_offset=07105_W_Uso de '-offset(%esp)', acesso pode causar travamento ou valor pode ser perdido
+% Using -8(%esp) to access a local stack is not recommended, as
+% this stack portion can be overwritten by any function calls or interrupts.
+asmr_e_no_vmtoffset_possible=07106_E_'VMTOffset' deve ser usado em combinação com um método virtual, e "$1" não é virtual
+% Only virtual methods have VMT offsets
+asmr_e_need_pic_ref=07107_E_Gerando PIC, mas referência não é segura (PIC-safe)
+% The compiler has been configured to generate position-independent code
+% (PIC), but there are position-dependent references in the current
+% handwritten assembler instruction.
+asmr_e_mixing_regtypes=07108_E_Todos os registros em um conjunto de registros devem ser do mesmo tipo e largura
+% Instructions on the ARM architecture that take a register set as argument require that all registers
+% in this set are of the same kind (e.g., integer, vfp) and width (e.g., single precision, double precision).
+asmr_e_empty_regset=07109_E_Um conjunto de registros não pode estar vazio
+% Instructions on the ARM architecture that take a register set as argument require that such a set
+% contains at least one register.
+#
+# Assembler/binary writers
+#
+# 08020 is the last used one
+#
+asmw_f_too_many_asm_files=08000_F_Muitos arquivos assembler
+% With smartlinking enabled, there are too many assembler
+% files generated. Disable smartlinking.
+asmw_f_assembler_output_not_supported=08001_F_Saída assembler selecionada não suportada
+asmw_f_comp_not_supported=08002_F_'Comp' não suportado
+asmw_f_direct_not_supported=08003_F_Modo direto não suportado por gravadores binários
+% Direct assembler mode is not supported for binary writers.
+asmw_e_alloc_data_only_in_bss=08004_E_Alocamento de dados somente permitida na seção 'bss'
+asmw_f_no_binary_writer_selected=08005_F_Nenhum gravador binário selecionado
+asmw_e_opcode_not_in_table=08006_E_Asm: Opcode $1 não está na tabela
+asmw_e_invalid_opcode_and_operands=08007_E_Asm: $1 combinação inválida de 'opcode' e operandos
+asmw_e_16bit_not_supported=08008_E_Asm: referências 16 Bits não suportadas
+asmw_e_invalid_effective_address=08009_E_Asm: Endereço efetivo inválido
+asmw_e_immediate_or_reference_expected=08010_E_Asm: Esperados 'Immediate' ou referência
+asmw_e_value_exceeds_bounds=08011_E_Asm: $1 valor excede limites $2
+asmw_e_short_jmp_out_of_range=08012_E_Asm: Salto curto fora de faixa $1
+asmw_e_undefined_label=08013_E_Asm: Rótulo indefinido $1
+asmw_e_comp_not_supported=08014_E_Asm: Tipo 'Comp' não suportado por este alvo
+asmw_e_extended_not_supported=08015_E_Asm: Tipo extendido não suportado por este alvo
+asmw_e_duplicate_label=08016_E_Asm: Rótulo duplicado $1
+asmw_e_redefined_label=08017_E_Asm: Rótulo redefinido $1
+asmw_e_first_defined_label=08018_E_Asm: Primeiramente definido aqui
+asmw_e_invalid_register=08019_E_Asm: Registro inválido $1
+asmw_e_16bit_32bit_not_supported=08020_E_Asm: Referências 16 ou 32 Bits não suportadas
+asmw_e_64bit_not_supported=08021_E_Asm: Operandos 64 Bits não suportados
+
+#
+# Executing linker/assembler
+#
+# 09032 is the last used one
+#
+# BeginOfTeX
+%
+% \section{Errors of assembling/linking stage}
+% This section lists errors that occur when the compiler is processing the
+% command line or handling the configuration files.
+% \begin{description}
+exec_w_source_os_redefined=09000_W_Sistema operacional fonte redefinido
+% The source operating system is redefined.
+exec_i_assembling_pipe=09001_I_Montando (pipe) $1
+% Assembling using a pipe to an external assembler.
+exec_d_cant_create_asmfile=09002_E_Impossível criar arquivo assembler: $1
+% The mentioned file can't be created. Check if you have
+% access permissions to create this file.
+exec_e_cant_create_objectfile=09003_E_Impossível criar arquivo objeto: $1
+% The mentioned file can't be created. Check if you have
+% got access permissions to create this file.
+exec_e_cant_create_archivefile=09004_E_Impossível criar arquivo: $1
+% The mentioned file can't be created. Check if you have
+% access permissions to create this file.
+exec_e_assembler_not_found=09005_E_Montador $1 não encontrado, mudando para montador externo
+% The assembler program was not found. The compiler will produce a script that
+% can be used to assemble and link the program.
+exec_t_using_assembler=09006_T_Usando montador: $1
+% An informational message saying which assembler is being used.
+exec_e_error_while_assembling=09007_E_Erro ao montar código saída $1
+% There was an error while assembling the file using an external assembler.
+% Consult the documentation of the assembler tool to find out more information
+% on this error.
+exec_e_cant_call_assembler=09008_E_Impossível chamar montador, erro $1 mudando para montador externo
+% An error occurred when calling an external assembler. The compiler will produce a script that
+% can be used to assemble and link the program.
+exec_i_assembling=09009_I_Montando $1
+% An informational message stating which file is being assembled.
+exec_i_assembling_smart=09010_I_Montando com vinculação inteligente $1
+% An informational message stating which file is being assembled using smartlinking.
+exec_w_objfile_not_found=09011_W_Objeto $1 não encontrado, Vinculação pode falhar !
+% One of the object files is missing, and linking will probably fail.
+% Check your paths.
+exec_w_libfile_not_found=09012_W_Biblioteca $1 não encontrada, Vinculação pode falhar !
+% One of the library files is missing, and linking will probably fail.
+% Check your paths.
+exec_e_error_while_linking=09013_E_Erro durante vinculação
+% Generic error while linking.
+exec_e_cant_call_linker=09014_E_Impossível chamar vinculador, mudando para vinculação externa
+% An error occurred when calling an external linker. The compiler will produce a script that
+% can be used to assemble and link the program.
+exec_i_linking=09015_I_Vinculando $1
+% An informational message, showing which program or library is being linked.
+exec_e_util_not_found=09016_E_Utilitário $1 ão encontrado, mudando para vinculação externa
+% An external tool was not found. The compiler will produce a script that
+% can be used to assemble and link or postprocess the program.
+exec_t_using_util=09017_T_Usando utilitário $1
+% An informational message, showing which external program (usually a postprocessor) is being used.
+exec_e_exe_not_supported=09018_E_Criação de Executáveis não suportada
+% Creating executable programs is not supported for this platform, because it was
+% not yet implemented in the compiler.
+exec_e_dll_not_supported=09019_E_Criação de bibliotecas Dinâmicas/Compartilhadas não suportada
+% Creating dynamically loadable libraries is not supported for this platform, because it was
+% not yet implemented in the compiler.
+exec_i_closing_script=09020_I_Fechando roteiro $1
+% Informational message showing when writing of the external assembling and linking script is finished.
+exec_e_res_not_found=09021_E_Compilador recursos "$1" não encontrado, mudando para modo externo
+% An external resource compiler was not found. The compiler will produce a script that
+% can be used to assemble, compile resources and link or postprocess the program.
+exec_i_compilingresource=09022_I_Compilando recursos $1
+% An informational message, showing which resource is being compiled.
+exec_t_unit_not_static_linkable_switch_to_smart=09023_T_Unidade $1 não pode ser vinculada estaticamente, mudando para vinculação inteligente
+% Static linking was requested, but a unit which is not statically linkable was used.
+exec_t_unit_not_smart_linkable_switch_to_static=09024_T_Unidade $1 não pode ser vinculada inteligentemente, mudando para vinculação estática
+% Smart linking was requested, but a unit which is not smart-linkable was used.
+exec_t_unit_not_shared_linkable_switch_to_static=09025_T_Unidade $1 não pode ser vinculada compartilhadamente, mudando para vinculação estática
+% Shared linking was requested, but a unit which is not shared-linkable was used.
+exec_e_unit_not_smart_or_static_linkable=09026_E_Unidade $1 não pode ser vinculada inteligentemente ou estaticamente
+% Smart or static linking was requested, but a unit which cannot be used for either  was used.
+exec_e_unit_not_shared_or_static_linkable=09027_E_Unidade $1 não pode ser vinculada compartilhadamente ou estaticamente
+% Shared or static linking was requested, but a unit which cannot be used for either  was used.
+exec_d_resbin_params=09028_D_Chamando compilador recursos "$1" com "$2" como linha comando
+% An informational message showing which command line is used for the resource compiler.
+exec_e_error_while_compiling_resources=09029_E_Erro ao compilar recursos
+% The resource compiler or converter returned an error.
+exec_e_cant_call_resource_compiler=09030_E_Impossível chamar o compilador recursos "$1", mudando para modo externo
+% An error occurred when calling a resource compiler. The compiler will produce
+% a script that can be used to assemble, compile resources and link or
+% postprocess the program.
+exec_e_cant_open_resource_file=09031_E_Impossível abrir arquivo recursos "$1"
+% An error occurred resource file can not be opened.
+exec_e_cant_write_resource_file=09032_E_Impossível gravar arquivo recursos "$1"
+% An error occurred resource file can not be written.
+%\end{description}
+# EndOfTeX
+
+#
+# Executable information
+#
+# 09134 is the last used one
+#
+# BeginOfTeX
+% \section{Executable information messages.}
+% This section lists all messages that the compiler emits when an executable program is produced,
+% and only when the internal linker is used.
+% \begin{description}
+execinfo_f_cant_process_executable=09128_F_Impossível pós-processar executável $1
+% Fatal error when the compiler is unable to post-process an executable.
+execinfo_f_cant_open_executable=09129_F_Impossível abrir executável $1
+% Fatal error when the compiler cannot open the file for the executable.
+execinfo_x_codesize=09130_X_Tamanho do Código: $1 bytes
+% Informational message showing the size of the produced code section.
+execinfo_x_initdatasize=09131_X_Tamanho dos dados inicializados: $1 bytes
+% Informational message showing the size of the initialized data section.
+execinfo_x_uninitdatasize=09132_X_Tamanho dos dados não inicializados: $1 bytes
+% Informational message showing the size of the uninitialized data section.
+execinfo_x_stackreserve=09133_X_Espaço da Pilha reservado: $1 bytes
+% Informational message showing the stack size that the compiler reserved for the executable.
+execinfo_x_stackcommit=09134_X_Espaço da Pilha comprometido: $1 bytes
+% Informational message showing the stack size that the compiler committed for the executable.
+%\end{description}
+# EndOfTeX
+
+#
+# Internal linker messages
+#
+# 09201 is the last used one
+#
+# BeginOfTeX
+% \section{Linker messages}
+% This section lists messages produced by internal linker.
+% \begin{description}
+link_f_executable_too_big=09200_F_Tamanho imagem executável é muito grande para alvo $1.
+% Fatal error when resulting executable is too big.
+link_w_32bit_absolute_reloc=09201_W_Arquivo objeto "$1" contêm relocação absoluta de 32-bits para símbolo "$2".
+% Warning when 64-bit object file contains 32-bit absolute relocations.
+% In such case an executable image can be loaded into lower 4Gb of
+% address space only.
+%\end{description}
+# EndOfTeX
+
+#
+# Unit loading
+#
+# 10061 is the last used one
+#
+# BeginOfTeX
+% \section{Unit loading messages.}
+% This section lists all messages that can occur when the compiler is
+% loading a unit from disk into memory. Many of these messages are
+% informational messages.
+% \begin{description}
+unit_t_unitsearch=10000_T_Busca Unidade: $1
+% When you use the \var{-vt} option, the compiler tells you where it tries to find
+% unit files.
+unit_t_ppu_loading=10001_T_Carregando PPU $1
+% When the \var{-vt} switch is used, the compiler tells you
+% what units it loads.
+unit_u_ppu_name=10002_U_Nome PPU: $1
+% When you use the \var{-vu} flag, the unit name is shown.
+unit_u_ppu_flags=10003_U_PPU 'Flags': $1
+% When you use the \var{-vu} flag, the unit flags are shown.
+unit_u_ppu_crc=10004_U_PPU 'Crc': $1
+% When you use the \var{-vu} flag, the unit CRC check is shown.
+unit_u_ppu_time=10005_U_Hora PPU: $1
+% When you use the \var{-vu} flag, the time the unit was compiled is shown.
+unit_u_ppu_file_too_short=10006_U_Arquivo PPU muito pequeno
+% The ppufile is too short, not all declarations are present.
+unit_u_ppu_invalid_header=10007_U_Cabeçalho PPU inválido (sem PPU no começo)
+% A unit file contains as the first three bytes the ASCII codes of the characters \var{PPU}.
+unit_u_ppu_invalid_version=10008_U_Versão PPU inválida $1
+% This unit file was compiled with a different version of the compiler, and
+% cannot be read.
+unit_u_ppu_invalid_processor=10009_U_PPU foi compilado para outro processador
+% This unit file was compiled for a different processor type, and
+% cannot be read.
+unit_u_ppu_invalid_target=10010_U_PPU foi compilado para outro alvo
+% This unit file was compiled for a different target, and
+% cannot be read.
+unit_u_ppu_source=10011_U_Fonte PPU: $1
+% When you use the \var{-vu} flag, the unit source file name is shown.
+unit_u_ppu_write=10012_U_Gravando $1
+% When you specify the \var{-vu} switch, the compiler will tell you where it
+% writes the unit file.
+unit_f_ppu_cannot_write=10013_F_Impossível gravar arquivo PPU
+% An error occurred when writing the unit file.
+unit_f_ppu_read_error=10014_F_Erro ao ler arquivo PPU
+% This means that the unit file was corrupted, and contains invalid
+% information. Recompilation will be necessary.
+unit_f_ppu_read_unexpected_end=10015_F_Fim de arquivo PPU inesperado
+% Unexpected end of file. This may mean that the PPU file is
+% corrupted.
+unit_f_ppu_invalid_entry=10016_F_Entrada inválida arquivo PPU: $1
+% The unit the compiler is trying to read is corrupted, or generated with a
+% newer version of the compiler.
+unit_f_ppu_dbx_count_problem=10017_F_Problema contagem Dbx PPU
+% There is an inconsistency in the debugging information of the unit.
+unit_e_illegal_unit_name=10018_E_Nome unidade ilegal: $1
+% The name of the unit does not match the file name.
+unit_f_too_much_units=10019_F_Muitas unidades
+% \fpc has a limit of 1024 units in a program. You can change this behavior
+% by changing the \var{maxunits} constant in the \file{fmodule.pas} file of the
+% compiler, and recompiling the compiler.
+unit_f_circular_unit_reference=10020_F_Referência circular em unidade entre $1 e $2
+% Two units are using each other in the interface part. This is only allowed
+% in the \var{implementation} part. At least one unit must contain the other one
+% in the \var{implementation} section.
+unit_f_cant_compile_unit=10021_F_Impossível compilar unidade $1, nenhum fonte disponível
+% A unit was found that needs to be recompiled, but no sources are
+% available.
+unit_f_cant_find_ppu=10022_F_Impossível localizar unidade $1 usada por $2
+% You tried to use a unit of which the PPU file isn't found by the
+% compiler. Check your configuration file for the unit paths.
+unit_w_unit_name_error=10023_W_Unidade $1 não foi encontrada mas $2 existe
+% This error message is no longer used.
+unit_f_unit_name_error=10024_F_Unidade $1 foi procurada mas $2 encontrada
+% \dos truncation of 8 letters for unit PPU files
+% may lead to problems when unit name is longer than 8 letters.
+unit_w_switch_us_missed=10025_W_Compilar a unidade 'system' requer a chave -Us
+% When recompiling the system unit (it needs special treatment), the
+% \var{-Us} switch must be specified.
+unit_f_errors_in_unit=10026_F_Houveram $1 erros ao compilar módulo, parando
+% When the compiler encounters a fatal error or too many errors in a module
+% then it stops with this message.
+unit_u_load_unit=10027_U_Carregar de $1 ($2) unidade $3
+% When you use the \var{-vu} flag, which unit is loaded from which unit is
+% shown.
+unit_u_recompile_crc_change=10028_U_Recompilando $1, 'checksum' alterado para $2
+% The unit is recompiled because the checksum of a unit it depends on has
+% changed.
+unit_u_recompile_source_found_alone=10029_U_Recompilando $1, apenas fonte encontrado
+% When you use the \var{-vu} flag, these messages tell you why the current
+% unit is recompiled.
+unit_u_recompile_staticlib_is_older=10030_U_Recompilando unidade, bib estática é mais antiga que o arquivo ppu
+% When you use the \var{-vu} flag, the compiler warns if the static library
+% of the unit is older than the unit file itself.
+unit_u_recompile_sharedlib_is_older=10031_U_Recompilando unidade, bib compartilhada é mais antiga que o arquivo ppu
+% When you use the \var{-vu} flag, the compiler warns if the shared library
+% of the unit is older than the unit file itself.
+unit_u_recompile_obj_and_asm_older=10032_U_Recompilando unidade, 'obj' e 'asm' são mais antigos que o arquivo ppu
+% When you use the \var{-vu} flag, the compiler warns if the assembler or
+% object file of the unit is older than the unit file itself.
+unit_u_recompile_obj_older_than_asm=10033_U_Recompilando unidade, 'obj' é mais antigo que 'asm'
+% When you use the \var{-vu} flag, the compiler warns if the assembler
+% file of the unit is older than the object file of the unit.
+unit_u_parsing_interface=10034_U_Analisando 'interface' de $1
+% When you use the \var{-vu} flag, the compiler warns that it starts
+% parsing the interface part of the unit.
+unit_u_parsing_implementation=10035_U_Analisando 'implementation' de $1
+% When you use the \var{-vu} flag, the compiler warns that it starts
+% parsing the implementation part of the unit.
+unit_u_second_load_unit=10036_U_Segundo carregamento para a unidade $1
+% When you use the \var{-vu} flag, the compiler warns that it starts
+% recompiling a unit for the second time. This can happen with
+% interdependent units.
+unit_u_check_time=10037_U_PPU Verifique arquivo $1 hora $2
+% When you use the \var{-vu} flag, the compiler shows the filename and
+% date and time of the file on which a recompile depends.
+### The following two error msgs is currently disabled.
+#unit_h_cond_not_set_in_last_compile=10038_H_Conditional $1 was not set at startup in last compilation of $2
+#% when recompilation of an unit is required the compiler will check that
+#% the same conditionals are set for the recompiliation. The compiler has
+#% found a conditional that currently is defined, but was not used the last
+#% time the unit was compiled.
+#unit_h_cond_set_in_last_compile=10039_H_Conditional $1 was set at startup in last compilation of $2
+#% when recompilation of an unit is required the compiler will check that
+#% the same conditionals are set for the recompiliation. The compiler has
+#% found a conditional that was used the last time the unit was compiled, but
+#% the conditional is currently not defined.
+unit_w_cant_compile_unit_with_changed_incfile=10040_W_Impossível recompilar unidade $1, mas encontrados arquivos de inclusão modificados
+% A unit was found to have modified include files, but
+% some source files were not found, so recompilation is impossible.
+unit_u_source_modified=10041_U_Arquivo $1 é mais novo que o arquivo PPU $2
+% A modified source file for a compiler unit was found.
+unit_u_ppu_invalid_fpumode=10042_U_Tentando usar uma unidade que foi compilada com um modo diferente de FPU
+% Trying to compile code while using units which were not compiled with
+% the same floating point format mode. Either all code should be compiled
+% with FPU emulation on, or with FPU emulation off.
+unit_u_loading_interface_units=10043_U_Carregando unidades 'interface' de $1
+% When you use the \var{-vu} flag, the compiler warns that it is starting
+% to load the units defined in the interface part of the unit.
+unit_u_loading_implementation_units=10044_U_Carregando unidades 'implementation' de $1
+% When you use the \var{-vu} flag, the compiler warns that it is starting
+% to load the units defined in the implementation part of the unit.
+unit_u_interface_crc_changed=10045_U_Interface CRC alterado para a unidade $1
+% When you use the \var{-vu} flag, the compiler warns that the
+% CRC calculated for the interface has been changed after the implementation
+% has been parsed.
+unit_u_implementation_crc_changed=10046_U_Implementation CRC alterado para a unidade $1
+% When you use the \var{-vu} flag, the compiler warns that the
+% CRC calculated has been changed after the implementation
+% has been parsed.
+unit_u_finished_compiling=10047_U_Terminada a compilação da unidade $1
+% When you use the \var{-vu} flag, the compiler warns that it
+% has finished compiling the unit.
+unit_u_add_depend_to=10048_U_Adicionar dependência de $1 para $2
+% When you use the \var{-vu} flag, the compiler warns that it
+% has added a dependency between the two units.
+unit_u_no_reload_is_caller=10049_U_Nenhum recarregamento, é o chamador: $1
+% When you use the \var{-vu} flag, the compiler warns that it
+% will not reload the unit because it is the unit that wants
+% to load this unit.
+unit_u_no_reload_in_second_compile=10050_U_Nenhum recarregamento, já em segunda compilação: $1
+% When you use the \var{-vu} flag, the compiler warns that it
+% will not reload the unit because it is already in a second recompile.
+unit_u_flag_for_reload=10051_U_'Flag' para recarregamento: $1
+% When you use the \var{-vu} flag, the compiler warns that it
+% has to reload the unit.
+unit_u_forced_reload=10052_U_Recarregamento forçado
+% When you use the \var{-vu} flag, the compiler warns that it
+% is reloading the unit because it was required.
+unit_u_previous_state=10053_U_Estado anterior de $1: $2
+% When you use the \var{-vu} flag, the compiler shows the
+% previous state of the unit.
+unit_u_second_compile_unit=10054_U_Já compilando $1, ajustando segunda compilação
+% When you use the \var{-vu} flag, the compiler warns that it is starting
+% to recompile a unit for the second time. This can happen with interdependent
+% units.
+unit_u_loading_unit=10055_U_Carregando unidade $1
+% When you use the \var{-vu} flag, the compiler warns that it starts
+% loading the unit.
+unit_u_finished_loading_unit=10056_U_Terminado carregamento unidade $1
+% When you use the \var{-vu} flag, the compiler warns that it finished
+% loading the unit.
+unit_u_registering_new_unit=10057_U_Registrando nova unidade $1
+% When you use the \var{-vu} flag, the compiler warns that it has
+% found a new unit and is registering it in the internal lists.
+unit_u_reresolving_unit=10058_U_Re-solucionando unidade $1
+% When you use the \var{-vu} flag, the compiler warns that it
+% has to recalculate the internal data of the unit.
+unit_u_skipping_reresolving_unit=10059_U_Pulando re-solução unidade $1, ainda carregando unidades usadas
+% When you use the \var{-vu} flag, the compiler warns that it is
+% skipping the recalculation of the internal data of the unit
+% because there is no data to recalculate.
+unit_u_unload_resunit=10060_U_Descarregando unidade recursos $1 (não necessária)
+% When you use the \var{-vu} flag, the compiler warns that it is unloading the
+% resource handling unit, since no resources are used.
+unit_e_different_wpo_file=10061_E_Unidade $1 foi compilada usando uma entrada de retorno inteiramente diferente de otimização de programa ($2, $3); recompile-a sem 'wpo' ou use o mesmo arquivo de retorno de entrada 'wpo' para esta compilação
+% When a unit has been compiled using a particular whole program optimization (wpo) feedback file (\var{-FW<x>} \var{-OW<x>}),
+% this compiled version of the unit is specialised for that particular compilation scenario and cannot be used in
+% any other context. It has to be recompiled before you can use it in another program or with another wpo feedback input file.
+% \end{description}
+# EndOfTeX
+
+#
+#  Options
+#
+# 11047 is the last used one
+#
+option_usage=11000_O_$1 [options] <inputfile> [options]
+# BeginOfTeX
+%
+% \section{Command line handling errors}
+% This section lists errors that occur when the compiler is processing the
+% command line or handling the configuration files.
+% \begin{description}
+option_only_one_source_support=11001_W_Apenas uma arquivo fonte suportado, alterando arquivo fonte à compilar de "$1" para "$2"
+% You can specify only one source file on the command line. The last
+% one will be compiled, others will be ignored. This may indicate that
+% you forgot a \var{'-'} sign.
+option_def_only_for_os2=11002_W_Arquivo DEF pode ser criado apenas para OS/2
+% This option can only be specified when you're compiling for OS/2.
+option_no_nested_response_file=11003_E_Arquivos respostas aninhados não são suportados
+% You can not nest response files with the \var{@file} command line option.
+option_no_source_found=11004_F_Nenhm nome arquivo fonte na linha de comando
+% The compiler expects a source file name on the command line.
+option_no_option_found=11005_N_Nenhuma opção dentro do arquivo de configurações $1
+% The compiler didn't find any option in that config file.
+option_illegal_para=11006_E_Parâmetro ilegal: $1
+% You specified an unknown option.
+option_help_pages_para=11007_H_-? lista páginas ajuda
+% When an unknown option is given, this message is diplayed.
+option_too_many_cfg_files=11008_F_Muitos arquivos de configurações aninhados
+% You can only nest up to 16 config files.
+option_unable_open_file=11009_F_Incapaz de abrir arquivo $1
+% The option file cannot be found.
+option_reading_further_from=11010_D_Lendo demais opções de $1
+% Displayed when you have notes turned on, and the compiler switches
+% to another options file.
+option_target_is_already_set=11011_W_Alvo já está ajustado para: $1
+% Displayed if more than one \var{-T} option is specified.
+option_no_shared_lib_under_dos=11012_W_Bibs compartilhadas não são suportadas pela plataforma DOS, revertendo para estática
+% If you specify \var{-CD} for the \dos platform, this message is displayed.
+% The compiler supports only static libraries under \dos.
+option_too_many_ifdef=11013_F_No arquivo opções $1 na linha $2 muitos \var{\#IF(N)DEFs} encontrados
+% The \var{\#IF(N)DEF} statements in the options file are not balanced with
+% the \var{\#ENDIF} statements.
+option_too_many_endif=11014_F_No arquivo opções $1 na linha $2 encontrados \var{\#ENDIFs} inesperados
+% The \var{\#IF(N)DEF} statements in the options file are not balanced with
+% the \var{\#ENDIF} statements.
+option_too_less_endif=11015_F_Condicional aberta no final do arquivo de opções
+% The \var{\#IF(N)DEF} statements in the options file are not balanced with
+% the \var{\#ENDIF} statements.
+option_no_debug_support=11016_W_Geração de informações depuração não é suportada por este executável
+% It is possible to have a compiler executable that doesn't support
+% the generation of debugging info. If you use such an executable with the
+% \var{-g} switch, this warning will be displayed.
+option_no_debug_support_recompile_fpc=11017_H_Tente recompilar com -dGDB
+% It is possible to have a compiler executable that doesn't support
+% the generation of debugging info. If you use such an executable with the
+% \var{-g} switch, this warning will be displayed.
+option_obsolete_switch=11018_W_Você esta usando uma chave obsoleta $1
+% This warns you when you use a switch that is not needed/supported anymore.
+% It is recommended that you remove the switch to overcome problems in the
+% future, when the meaning of the switch may change.
+option_obsolete_switch_use_new=11019_W_Você esta usando uma chave obsoleta $1, favor usar $2
+% This warns you when you use a switch that is not supported anymore. You
+% must now use the second switch instead.
+% It is recommended that you change the switch to overcome problems in the
+% future, when the meaning of the switch may change.
+option_switch_bin_to_src_assembler=11020_N_Mudando montador assembler para o padrão escrita de fontes
+% This notifies you that the assembler has been changed because you used the
+% -a switch, which can't be used with a binary assembler writer.
+option_incompatible_asm=11021_W_Saída Assembler selecionado "$1" incompatível com "$2"
+option_asm_forced=11022_W_"$1" uso forçado montador assembler
+% The assembler output selected can not generate
+% object files with the correct format. Therefore, the
+% default assembler for this target is used instead.
+option_using_file=11026_T_Lendo opções do arquivo $1
+% Options are also read from this file.
+option_using_env=11027_T_Lendo opções do ambiente $1
+% Options are also read from this environment string.
+option_handling_option=11028_D_Manipulando opção "$1"
+% Debug info that an option is found and will be handled.
+option_help_press_enter=11029_O_*** pressione <enter> ***
+% Message shown when help is shown page per page. When pressing the ENTER
+% Key, the next page of help is shown. If you press q and then ENTER, the
+% compiler exits.
+option_start_reading_configfile=11030_H_Início leitura do arquivo configuração $1
+% Start of configuration file parsing.
+option_end_reading_configfile=11031_H_Final leitura do arquivo configuração $1
+% End of configuration file parsing.
+option_interpreting_option=11032_D_Interpretando opção "$1"
+% The compiler is interpreting an option
+option_interpreting_firstpass_option=11036_D_Interpretando primeiro passo opção "$1"
+% The compiler is interpreting an option for the first time.
+option_interpreting_file_option=11033_D_Interpretando opção arquivo "$1"
+% The compiler is interpreting an option which it read from the configuration file.
+option_read_config_file=11034_D_Lendo arquivo configuração "$1"
+% The compiler is starting to read the configuration file.
+option_found_file=11035_D_Nome arquivo fonte encontrado "$1"
+% Additional information about options.
+% Displayed when you have the debug option turned on.
+option_code_page_not_available=11039_E_Página de código desconhecida
+% An unknown code page for the source files was requested.
+% The compiler is compiled with support for several code pages built-in.
+% The requested code page is not in that list. You will need to recompile
+% the compiler with support for the codepage you need.
+option_config_is_dir=11040_F_Arquivo configuração $1 é um diretório
+% Directories cannot be used as configuration files.
+option_confict_asm_debug=11041_W_Saída montador Assembler selecionado "$1" não pode gerar informações depuração, depuração desabilitada
+% The selected assembler output cannot generate
+% debugging information, debugging option is therefore disabled.
+option_ppc386_deprecated=11042_W_Uso de 'ppc386.cfg' está depreciado, favor usar 'fpc.cfg'
+% Using ppc386.cfg is still supported for historical reasons, however, for a multiplatform
+% system the naming makes no sense anymore. Please continue to use fpc.cfg instead.
+option_else_without_if=11043_F_No arquivo opções $1 na linha $2 diretiva \var{\#ELSE} sem \var{\#IF(N)DEF} encontrada
+% An \var{\#ELSE} statement was found in the options file without a matching \var{\#IF(N)DEF} statement.
+option_unsupported_target=11044_F_Opção "$1" não é, ou ainda não é, suportada pela plataforma alvo atual
+% Not all options are supported or implemented for all target platforms. This message informs you that a chosen
+% option is incompatible with the currently selected target platform.
+option_unsupported_target_for_feature=11045_F_A característica "$1" não é, ou ainda não é, suportada pela plataforma alvo selecionada
+% Not all features are supported or implemented for all target platforms. This message informs you that a chosen
+% feature is incompatible with the currently selected target platform.
+option_dwarf_smart_linking=11046_N_Informação de depuração DWARF não pode ser usada com vinculação inteligente neste alvo, mudando para vinculação estática
+% Smart linking is currently incompatble with DWARF debug information on most
+% platforms, so smart linking is disabled in such cases.
+option_ignored_target=11047_W_Opção "$1" ignorada pela plataforma alvo atual
+% Not all options are supported or implemented for all target platforms. This message informs you that a chosen
+% option is ignored for the currently selected target platform.
+%\end{description}
+# EndOfTeX
+
+#
+#  Whole program optimization
+#
+# 12019 is the last used one
+#
+# BeginOfTeX
+%
+% \section{Whole program optimization messages}
+% This section lists errors that occur when the compiler is performing
+% whole program optimization.
+% \begin{description}
+wpo_cant_find_file=12000_F_Impossível abrir arquivo de retorno de otimização completa de programa "$1"
+% The compiler cannot open the specified feedback file with whole program optimization information.
+wpo_begin_processing=12001_D_Processando informações de otimização completa de programa no arquivo retorno 'wpo' "$1"
+% The compiler starts processing whole program optimization information found in the named file.
+wpo_end_processing=12002_D_Terminado processamento de otimização completea de programa no arquivo retorno 'wpo' "$1"
+% The compiler has finished processing the whole program optimization information found in the named file.
+wpo_expected_section=12003_E_Seção cabeçalho esperada, mas obtido "$2" na linhae $1 do arquivo retorno 'wpo'
+% The compiler expected a section header in the whole program optimization file (starting with \%),
+% but did not find it.
+wpo_no_section_handler=12004_W_Nenhum manipulador registrado para seção otimização completa de programa "$2" na linha $1 do arquivo de retorno 'wpo', ignorando
+% The compiler has no handler to deal with the mentioned whole program optimization information
+% section, and will therefore ignore it and skip to the next section.
+wpo_found_section=12005_D_Encontrada seção otimização completa de programa "$1" com informações sobre "$2"
+% The compiler encountered a section with whole program optimization information, and according
+% to its handler this section contains information usable for the mentioned purpose.
+wpo_no_input_specified=12006_F_As otimizações completas de programa selecionadas requerem um arquivo de retorno previamente gerado (use -Fw para especificar)
+% The compiler needs information gathered during a previous compilation run to perform the selected
+% whole program optimizations. You can specify the location of the feedback file containing this
+% information using the -Fw switch.
+wpo_not_enough_info=12007_E_Nenhuma informação coletada necessária para realizar "$1" otimização completa programa foi encontrada
+% While you pointed the compiler to a file containing whole program optimization feedback, it
+% did not contain the information necessary to perform the selected optimizations. You most likely
+% have to recompile the program using the appropate -OWxxx switch.
+wpo_no_output_specified=12008_F_Especifique um arquivo de retorno de otimização completa programa para armazenar as informações geradas (usando -FW)
+% You have to specify the feedback file in which the compiler has to store the whole program optimization
+% feedback that is generated during the compilation run. This can be done using the -FW switch.
+wpo_output_without_info_gen=12009_E_Não gerando qualquer informação otimização completa programa, assim mesmo um arquivo de retorno foi especificado (usando -FW)
+% The compiler was instructed to store whole program optimization feedback into a file specified using -FW,
+% but not to actually generated any whole program optimization feedback. The classes of to be
+% generated information can be speciied using -OWxxx.
+wpo_input_without_info_use=12010_E_Não realizando qualquer otimização completa programa, assim mesmo um arquivo de retorno foi especificado (usando -Fw)
+% The compiler was not instructed to perform any whole program optimizations (no -Owxxx parameters),
+% but nevertheless an input file with such feedback was specified (using -Fwyyy). Since this can
+% indicate that you forgot to specify an -Owxxx parameter, the compiler generates an error in this case.
+wpo_skipping_unnecessary_section=12011_D_Pulando seção otimização completa programa "$1", porque não é necessária pelas otimizações solicitadas
+% The whole program optimization feedback file contains a section with information that is not
+% required by the selected whole program optimizations.
+wpo_duplicate_wpotype=12012_W_Sobrepondo informações previamente lidas para "$1" do arquivo entrada retorno usando informações na seção "$2"
+% The feedback file contains multiple sections that provide the same class of information (e.g.,
+% information about which virtual methods can be devirtualized). In this case, the information in last encountered
+% section is used. Turn on debugging output (-vd) to see which class of information is provided by each section.
+wpo_cannot_extract_live_symbol_info_strip=12013_E_Impossível extrair informações de vida de símbolos do programa durante eliminação símbolos, use -Xs-
+% Certain symbol liveness collectors extract the symbol information from the linked program. If the symbol information
+% is stripped (option -Xs), this is not possible.
+wpo_cannot_extract_live_symbol_info_no_link=12014_E_Impossível extrair informações de vida de símbolos do programa quando não vinculando
+% Certain symbol liveness collectors extract the symbol information from the linked program. If the program is not
+% linked by the compiler, this is not possible.
+wpo_cannot_find_symbol_progs=12015_F_Impossível encontrar "$1" ou "$2" para extrair informações de vida de símbolos do programa vinculado
+% Certain symbol liveness collectors need a helper program to extract the symbol information from the linked program.
+% This helper program is normally 'nm', which is part of the GNU binutils.
+wpo_error_reading_symbol_file=12016_E_Erro durante leitura das informações de vída de símbolos produzidas por "$1"
+% An error occurred during the reading of the symbol liveness file that was generated using the 'nm' or 'objdump' program. The reason
+% can be that it was shorter than expected, or that its format was not understood.
+wpo_error_executing_symbol_prog=12017_F_Erro executando "$1" (código saída: $2) para extrair informações de símbolos do programa vinculado
+% Certain symbol liveness collectors need a helper program to extract the symbol information from the linked program.
+% The helper program produced the reported error code when it was run on the linked program.
+wpo_symbol_live_info_needs_smart_linking=12018_E_Coleção de informações de vida de símbolos pode ajudar apenas quando usando vinculação inteligente, use -CX -XX
+% Whether or not a symbol is live is determined by looking whether it exists in the final linked program.
+% Without smart linking/dead code stripping, all symbols are always included, regardless of whether they are
+% actually used or not. So in that case all symbols will be seen as live, which makes this optimization ineffective.
+wpo_cant_create_feedback_file=12019_E_Impossível criar arquivo retorno otimizações completas de programa especificado "$1"
+% The compiler is unable to create the file specified using the -FW parameter to store the whole program optimisation information.
+%\end{description}
+# EndOfTeX
+
+
+#
+# Logo (option -l)
+#
+option_logo=11023_[
+Compilador Free Pascal versão $FPCFULLVERSION [$FPCDATE] para $FPCCPU
+Copyright (c) 1993-2009 by Florian Klaempfl
+]
+
+#
+# Info (option -i)
+#
+option_info=11024_[
+Compilador Free Pascal versão $FPCVERSION
+
+Data Compilador    : $FPCDATE
+CPU Alvo Copilador : $FPCCPU
+
+Alvos suportados:
+  $OSTARGETS
+
+Conjunto de instruções CPU suportados:
+  $INSTRUCTIONSETS
+
+Conjunto de instruções FPU suportados:
+  $FPUINSTRUCTIONSETS
+
+Alvos ABI suportados:
+  $ABITARGETS
+
+Otimizações suportadas:
+  $OPTIMIZATIONS
+
+Otimizaçõs Completas Programa suportadas:
+  Todas
+  $WPOPTIMIZATIONS
+
+Tipos Microcontroladores suportados:
+  $CONTROLLERTYPES
+
+Este programa é oferecido sob a Licença Geral Pública GNU
+Para maiores informações leia COPYING.FPC
+
+Reportar falhas, sugestões, etc. para:
+                 http://bugs.freepascal.org
+ou
+                 [email protected]
+]
+
+#
+# Help pages (option -? and -h)
+#
+# The first character on the line indicates who will display this
+# line, the current possibilities are :
+#    * = every target
+#    3 = 80x86 targets
+#    6 = 680x0 targets
+#    e = in extended debug mode only
+#    P = PowerPC targets
+#    S = Sparc targets
+#    V = Virtual machine targets
+# The second character also indicates who will display this line,
+# (if the above character was TRUE) the current possibilities are :
+#    * = everyone
+#    g = with GDB info supported by the compiler
+#    O = OS/2
+#    L = UNIX systems
+#  The third character represents the indentation level.
+#
+option_help_pages=11025_[
+**0*_Ponha + após uma chave de opção boleana para habilitá-la, - para desabilitá-la
+**1a_O compilador não elimina o arquivo gerado do montador assembler
+**2al_Lista linhas do código fonte no arquivo assembler
+**2an_Lista informações nó no arquivo assembler
+*L2ap_Usa encadeadores (pipes) em vez de criar arquivos temporários assembler
+**2ar_Lista informações alocação/liberação registros no arquivo assembler
+**2at_Lista informações temporárias alocação/liberação no arquivo assembler
+**1A<x>_Formato saída:
+**2Adefault_Usa montador assembler padrão
+3*2Aas_Monta usando o GNU AS
+3*2Anasmcoff_Arquivo COFF (Go32v2) usando Nasm
+3*2Anasmelf_Arquivo ELF32 (Linux) usando Nasm
+3*2Anasmwin32_Arquivo objeto Win32 usando Nasm
+3*2Anasmwdosx_Arquivo objeto Win32/WDOSX usando Nasm
+3*2Awasm_Arquivo Obj usando Wasm (Watcom)
+3*2Anasmobj_Arquivo Obj usando Nasm
+3*2Amasm_Arquivo Obj usando Masm (Microsoft)
+3*2Atasm_Arquivo Obj usando Tasm (Borland)
+3*2Aelf_ELF (Linux) usando gravador interno
+3*2Acoff_COFF (Go32v2) usando gravador interno
+3*2Apecoff_PE-COFF (Win32) usando gravador interno
+4*2Aas_Monta usando o GNU AS
+6*2Aas_Arquivo Unix .o usando o GNU AS
+6*2Agas_Montador assembler GNU Motorola
+6*2Amit_Sintaxe MIT (antigo GAS)
+6*2Amot_Montador assembler Motorola padrão
+A*2Aas_Monta usando o GNU AS
+P*2Aas_Monta usando o GNU AS
+S*2Aas_Monta usando o GNU AS
+**1b_Gera informações navegador
+**2bl_Gera informações símbolos locais
+**1B_Constrói todos os módulos
+**1C<x>_Opções geração de código:
+**2Ca<x>_Seleciona ABI, veja fpc -i para possíveis valores
+**2Cb_Gera código 'big-endian'
+**2Cc<x>_Ajusta convenção de chamada para <x>
+**2CD_Cria também biblioteca dinâmica (não suportado)
+**2Ce_Compilação com opcodes de ponto flutuante emulados
+**2Cf<x>_Seleciona conjunto de instruções fpu a usar, veja fpc -i para possíveis valores
+**2CF<x>_Precisão mínima constante ponto flutuante (padrão, 32, 64)
+**2Cg_Gera código PIC
+**2Ch<n>_<n> bytes heap (entre 1023 e 67107840)
+**2Ci_Verificação E/S
+**2Cn_Omite estágio vinculação
+**2Co_Verifica transbordamento de operações inteiras
+**2CO_Verifica possível transbordamento de operações inteiras
+**2Cp<x>_Seleciona conjunto de instruções, veja fpc -i para possíves valores
+**2CP<x>=<y>_ Ajustes compactação
+**3CPPACKSET=<y>_ <y> conjunto alocação: 0, 1 ou DEFAULT ou NORMAL, 2, 4 e 8
+**2Cr_Verificação de faixa
+**2CR_Verifica validade de chamada de método de objeto
+**2Cs<n>_Ajusta verificação tamanho da Pilha para <n>
+**2Ct_Verificação Pilha (apenas para testes, veja manual)
+**2CX_Cria também biblioteca inteligentemente vinculada
+**1d<x>_Define o símbolo <x>
+**1D_Gera um arquivo DEF
+**2Dd<x>_Ajusta descrição para <x>
+**2Dv<x>_Ajusta versão DLL para <x>
+*O2Dw_Aplicação PM
+**1e<x>_Ajusta caminho para executável
+**1E_Mesmo que -Cn
+**1fPIC_Mesmo que -Cg
+**1F<x>_Ajusta nomes de arquivo e caminhos:
+**2Fa<x>[,y]_(para um programa) carregar unidades <x> e [y] antes de analisar cláusula 'uses'
+**2Fc<x>_Ajusta entrada página de código para <x>
+**2FC<x>_Ajusta nome do compilador RC binário para <x>
+**2Fd_Disabilita o cache de diretórios interno do compilador
+**2FD<x>_Ajusta o diretório onde procurar por utilitários para o compilador
+**2Fe<x>_Redireciona saída erros para <x>
+**2Ff<x>_Adiciona <x> ao caminho framework (apenas Darwin)
+**2FE<x>_Ajusta caminho saída exe/unidade para <x>
+**2Fi<x>_Adiciona <x> ao caminho inclusões
+**2Fl<x>_Adiciona <x> ao caminho bibliotecas
+**2FL<x>_Use <x> como vinculador dinâmico
+**2Fm<x>_Carrega tabela conversão unicode de <x>.txt no dir. do compilador
+**2Fo<x>_Adiciona <x> ao caminho objetos
+**2Fr<x>_Carrega o arquivo mensagens erro <x>
+**2FR<x>_Ajusta vinculador recursos (.res) para <x>
+**2Fu<x>_Adiciona <x> ao caminho unidades
+**2FU<x>_Ajusta caminho saída unidade para <x>, sobrepõe -FE
+**2FW<x>_Armazena retorno otimização completa programa gerada em <x>
+**2Fw<x>_Carrega retorno otimização completa programa previamente armazenada de <x>
+*g1g_Gerar informações depuração (formato padrão para o alvo)
+*g2gc_Gerar verificações para ponteiros
+*g2gh_Usa unidade heaptrace (para depuração vazamentos/corrupção memória)
+*g2gl_Usa unidade informações linha (mostra mais info. com backtraces)
+*g2go<x>_Ajusta opções informações depuração
+*g3godwarfsets_ Habilita 'conjunto' info. depuração DWARF (falhas gdb < 6.5)
+*g3gostabsabsincludes_ Armazena caminhos absolutos/completos arquivos inclusões em 'Stabs'
+*g3godwarfmethodclassprefix_ Prefixa nomes métodos com nome classe em DWARF
+*g2gp_Preserva caixa nomes símbolos em 'stabs'
+*g2gs_Gera informações depuração 'Stabs'
+*g2gt_Inutiliza variáveis locais (para detetar utilização de não-inicilizadas)
+*g2gv_Gera programas rastreáveis com 'Valgrind'
+*g2gw_Gera informações depuração DWARFv2 (mesmo que -gw2)
+*g2gw2_Gera informações depuração DWARFv2
+*g2gw3_Gera informações depuração DWARFv3
+**1i_Informações
+**2iD_Retorna data compilador
+**2iV_Retorna versão compilador curta
+**2iW_Retorna versão compilador completa
+**2iSO_Retorna SO compilador
+**2iSP_Retorna processador servidor compilador
+**2iTO_Retorna SO alvo
+**2iTP_Retorna processador alvo
+**1I<x>_Adiciona <x> ao caminho inclusões
+**1k<x>_Passa <x> ao vinculador
+**1l_Grava logo
+**1M<x>_Ajusta modo linguagem para <x>
+**2Mfpc_Dialeto Free Pascal (padrão)
+**2Mobjfpc_Modo FPC com suporte ao Object Pascal
+**2Mdelphi_Modo compatibilidade Delphi 7
+**2Mtp_Modo compatibilidade TP/BP 7.0
+**2Mmacpas_Modo compatibilidade dialetos Macintosh Pascal
+**1n_Não ler os arquivos de configurações padrão
+**1N<x>_Otimizações nós árvore
+**2Nu_Desdobra laços
+**1o<x>_Altera o nome do executável produzido para <x>
+**1O<x>_Otimizações:
+**2O-_Disabilita otimizações
+**2O1_Nível 1 otimizações (rápida e amigável depurador)
+**2O2_Nível 2 otimizações (-O1 + otimizações rápidas)
+**2O3_Nível 3 otimizações (-O2 + otimizações lentas)
+**2Oa<x>=<y>_Ajusta alinhamento
+**2Oo[NO]<x>_Habilita ou desabilita otimizações, veja fpc -i para possíveis valores
+**2Op<x>_Ajusta cpu alvo para otimizações, veja fpc -i para possíveis valores
+**2OW<x>_Gera retorno otimização completa programa para otimizações <x>, veja fpc -i para possíveis valores
+**2Ow<x>_Realiza otimização completa programa <x>, veja fpc -i para possíveis valores
+**2Os_Otimiza tamanho ao invés de velocidade
+**1pg_Gera perfil código para 'gprof' (define FPC_PROFILE)
+**1R<x>_Estilo leitura Assembler:
+**2Rdefault_Use assembler padrão para alvo
+3*2Ratt_Leia assembler estilo AT&T
+3*2Rintel_Leia assembler estilo Intel
+6*2RMOT_Leia assembler estilo motorola
+**1S<x>_Opções sintaxe:
+**2S2_Mesmo que -Mobjfpc
+**2Sc_Suporte operadores similares C (*=,+=,/= and -=)
+**2Sa_Liga afirmações (assertions)
+**2Sd_Mesmo que -Mdelphi
+**2Se<x>_Opções erros. <x> é uma combinação do seguinte:
+**3*_<n> : Compilador para depois de <n> erros (padrão é 1)
+**3*_w : Compilador também para após avisos
+**3*_n : Compilador também para após notas
+**3*_h : Compilador também para após dicas
+**2Sg_Habilita LABEL e GOTO (padrão em -Mtp e -Mdelphi)
+**2Sh_Use 'ansistrings' por padrão ao invés de 'shortstrings'
+**2Si_Liga 'inlining' de procedimentos/funções declaradas como "em-linha" (inline)
+**2Sk_Carrega unidade 'fpcylix'
+**2SI<x>_Ajusta estilo interface para <x>
+**3SIcom_COM interface compatível (padrão)
+**3SIcorba_CORBA interface compatível
+**2Sm_Suporta macros semelhantes C (global)
+**2So_Mesmo que -Mtp
+**2Ss_Nome construtor deve ser 'init' (destruidor deve ser 'done')
+**2St_Permite palavras-chave estáticas em objetos
+**2Sx_Habilita palavras-chave exceções (padrão nos modos Delphi/ObjFPC)
+**1s_Não chama o montador assembler e o vinculador
+**2sh_Gera roteiro para vincular no servidor
+**2st_Gera roteiro para vincular no alvo
+**2sr_Pula fase alocação registro (use com -alr)
+**1T<x>_Sistema operacional alvo:
+3*2Temx_OS/2 via EMX (incluidos extensor EMX/RSX)
+3*2Tfreebsd_FreeBSD
+3*2Tgo32v2_Versão 2 do extensor DOS DJ Delorie
+3*2Tlinux_Linux
+3*2Tnetbsd_NetBSD
+3*2Tnetware_Módulo Novell Netware (clib)
+3*2Tnetwlibc_Módulo Novell Netware (libc)
+3*2Topenbsd_OpenBSD
+3*2Tos2_OS/2 / eComStation
+3*2Tsunos_SunOS/Solaris
+3*2Tsymbian_Symbian OS
+3*2Twatcom_Extensor DOS compatível Watcom
+3*2Twdosx_Extensor DOS WDOSX
+3*2Twin32_Windows 32 Bit
+3*2Twince_Windows CE
+4*2Tlinux_Linux
+6*2Tamiga_Commodore Amiga
+6*2Tatari_Atari ST/STe/TT
+6*2Tlinux_Linux/m68k
+6*2Tmacos_Macintosh m68k (não suportado)
+6*2Tpalmos_PalmOS
+A*2Tlinux_Linux
+A*2Twince_Windows CE
+P*2Tamiga_AmigaOS no PowerPC
+P*2Tdarwin_Darwin e Mac OS X no PowerPC
+P*2Tlinux_Linux no PowerPC
+P*2Tmacos_Mac OS (clássico) no PowerPC
+P*2Tmorphos_MorphOS
+S*2Tlinux_Linux
+**1u<x>_Indefine o símbolo <x>
+**1U_Opções unidades:
+**2Un_Não verifica onde o nome unidade coincide com o nome arquivo
+**2Ur_Gera arquivos lançamento unidades (nunca automaticamente recompilado)
+**2Us_Compilar uma unidade sistema
+**1v<x>_Ser detalhado. <x> é uma combinação das seguintes letras:
+**2*_e : Mostra erros (padrão)       0 : Nada mostra (exceto erros)
+**2*_w : Mostra avisos               u : Mostra info. unidade
+**2*_n : Mostra notas                t : Mostra arquivos tentados/usados
+**2*_h : Mostra dicas                c : Mostra condicionais
+**2*_i : Mostra info. geral          d : Mostra info. depuração
+**2*_l : Mostra números linhas       r : Modo compatibilidade Rhide/GCC
+**2*_s : Mostra Data/Hora            q : Mostra números mensagens
+**2*_a : Mostra tudo                 x : Info. executável (apenas Win32)
+**2*_b : Grava mensagens nome arqs.  p : Grava tree.log com árvore análise
+**2*_    com caminho completo        v : Grava fpcdebug.txt com muitas
+**2*_                                    informações de depuração
+**2*_m<x>,<y> : Não mostra mensagens numeradas <x> e <y>
+3*1W<x>_Opções específicas alvo (alvos)
+A*1W<x>_Opções específicas alvo (alvos)
+P*1W<x>_Opções específicas alvo (alvos)
+p*1W<x>_Opções específicas alvo (alvos)
+3*2Wb_Cria um encarte ao invés de uma biblioteca (Darwin)
+P*2Wb_Cria um encarte ao invés de uma biblioteca (Darwin)
+p*2Wb_Cria um encarte ao invés de uma biblioteca (Darwin)
+3*2WB_Cria uma imagem relocável (Windows)
+A*2WB_Cria uma imagem relocável (Windows, Symbian)
+3*2WC_Especifica tipo aplicação console (EMX, OS/2, Windows)
+A*2WC_Especifica tipo aplicação console (Windows)
+P*2WC_Especifica tipo aplicação console (Classic Mac OS)
+3*2WD_Use DEFFILE para exportar funções de DLL ou EXE (Windows)
+A*2WD_Use DEFFILE para exportar funções de DLL ou EXE (Windows)
+3*2We_Use recursos externos (Darwin)
+P*2We_Use recursos externos (Darwin)
+p*2We_Use recursos externos (Darwin)
+3*2WF_Especifica tipo aplicação tela-cheia (EMX, OS/2)
+3*2WG_Especifica tipo aplicação gráfica (EMX, OS/2, Windows)
+A*2WG_Especifica tipo aplicação gráfica (Windows)
+P*2WG_Especifica tipo aplicação gráfica (Mac OS Clássico)
+3*2Wi_Use recursos internos (Darwin)
+P*2Wi_Use recursos internos (Darwin)
+p*2Wi_Use recursos internos (Darwin)
+3*2WN_Não gera código relocação, necessário para depuração (Windows)
+A*2WN_Não gera código relocação, necessário para depuração (Windows)
+3*2WR_Gera código relocação (Windows)
+A*2WR_Gera código relocação (Windows)
+P*2WT_Especifica tipo aplicação ferramenta MPW (Mac OS Clássico)
+3*2WX_Habilita pilha executável (Linux)
+A*2WX_Habilita pilha executável (Linux)
+p*2WX_Habilita pilha executável (Linux)
+P*2WX_Habilita pilha executável (Linux)
+**1X_Opções executável:
+**2Xc_Passa '--shared/-dynamic' para o vinculador (BeOS, Darwin, FreeBSD, Linux)
+**2Xd_Não usa caminho busca biblioteca padrão (necessário para compilação 'cross')
+**2Xe_Use vinculador externo
+**2Xg_Cria info.depuração em um arquivo separado e adiciona uma seção 'debuglink' no executável
+**2XD_Tenta vincular unidades dinâmicamente (define FPC_LINK_DYNAMIC)
+**2Xi_Use vinculador interno
+**2Xm_Gera mapa vinculação
+**2XM<x>_Ajusta o nome da rotina 'principal' programa (padrão é 'main')
+**2XP<x>_Prefixa os nomes dos utilitários binários (binutils) com o prfixo <x>
+**2Xr<x>_Ajusta o caminho-rlink do vinculador para <x> (necessário para compilação 'cross', veja o manual do 'ld' para mais informações) (BeOS, Linux)
+**2XR<x>_Prefixa <x> para todos caminhos busca vinculador (BeOS, Darwin, FreeBSD, Linux, Mac OS, Solaris)
+**2Xs_Elimina todos os símbolos do executável
+**2XS_Tenta vincular unidades estaticamente (padrão, define FPC_LINK_STATIC)
+**2Xt_Vincula com bibliotecas estáticas (-static é passado ao vinculador)
+**2XX_Tenta vinculação inteligente unidades (define FPC_LINK_SMART)
+**1*_
+**1?_Mostra esta ajuda
+**1h_Mostra esta ajuda sem pausa
+]
+
+#
+# The End...

compiler/msg/errorptw.msg

@@ -1,2482 +0,0 @@
-#
-#   This file is part of the Free Pascal Compiler
-#   Copyright (c) 1999-2008 by the Free Pascal Development team
-#
-#   Portuguese (Windows encoding) language file for Free Pascal Compiler
-#   Contributed by Ari Ricardo Ody <ari.ody at japinfo.com.br>
-#   Based on errore.msg of SVN revision 3935
-#
-#   See the file COPYING.FPC, included in this distribution,
-#   for details about the copyright.
-#
-#   This program is distributed in the hope that it will be useful,
-#   but WITHOUT ANY WARRANTY; without even the implied warranty of
-#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-#
-#
-# The constants are build in the following order:
-# <part>_<type>_<txtidentifier>
-#
-# <part> is the part of the compiler the message is used
-#   asmr_     assembler parsing
-#   asmw_     assembler writing/binary writers
-
-#   unit_     unit handling
-#   scan_     scanner
-#   parser_   parser
-#   type_     type checking
-#   general_  general info
-#   exec_     calls to assembler, linker, binder
-#
-# <type> the type of the message it should normally used for
-#   f_   fatal error
-#   e_   error
-#   w_   warning
-#   n_   note
-#   h_   hint
-#   i_   info
-#   l_   add linenumber
-#   u_   used
-#   t_   tried
-#   c_   conditional
-#   d_   debug message
-#   x_   executable informations
-#
-
-#
-# General
-#
-#
-# 01023 is the last used one
-#
-general_text_bytes_code=01019_bytes de código
-general_text_bytes_data=01020_bytes de dados
-# BeginOfTeX
-% \section{General compiler messages}
-% This section gives the compiler messages which are not fatal, but which
-% display useful information. The number of such messages can be
-% controlled with the various verbosity level \var{-v} switches.
-% \begin{description}
-general_t_compilername=01000_T_Compilador usado: $1
-% When the \var{-vt} switch is used, this line tells you what compiler
-% is used.
-general_d_sourceos=01001_D_Sist.Op. da compilação: $1
-% When the \var{-vd} switch is used, this line tells you what the source
-% operating system is.
-general_i_targetos=01002_I_Sist.Op. de execução: $1
-% When the \var{-vd} switch is used, this line tells you what the target
-% operating system is.
-general_t_exepath=01003_T_Caminho para os executáveis: $1
-% When the \var{-vt} switch is used, this line tells you where the compiler
-% looks for its binaries.
-general_t_unitpath=01004_T_Caminho para as units: $1
-% When the \var{-vt} switch is used, this line tells you where the compiler
-% looks for compiled units. You can set this path with the \var{-Fu}
-general_t_includepath=01005_T_Caminho para os includes: $1
-% When the \var{-vt} switch is used, this line tells you where the compiler
-% looks for its include files (files used in \var{\{\$I xxx\}} statements).
-% You can set this path with the \var{-I} option.
-general_t_librarypath=01006_T_Caminho para as libraries: $1
-% When the \var{-vt} switch is used, this line tells you where the compiler
-% looks for the libraries. You can set this path with the \var{-Fl} option.
-general_t_objectpath=01007_T_Caminho para módulos objeto: $1
-% When the \var{-vt} switch is used, this line tells you where the compiler
-% looks for object files you link in (files used in \var{\{\$L xxx\}} statements).
-% You can set this path with the \var{-Fo} option.
-general_i_abslines_compiled=01008_I_$1 Linhas compiladas, $2 seg$3
-% When the \var{-vi} switch is used, the compiler reports the number
-% of lines compiled, and the time it took to compile them (real time,
-% not program time).
-general_f_no_memory_left=01009_F_Memória insuficiente para esta compilação
-% The compiler doesn't have enough memory to compile your program. There are
-% several remedies for this:
-% \begin{itemize}
-% \item If you're using the build option of the compiler, try compiling the
-% different units manually.
-% \item If you're compiling a huge program, split it up in units, and compile
-% these separately.
-% \item If the previous two don't work, recompile the compiler with a bigger
-% heap (you can use the \var{-Ch} option for this, \seeo{Ch})
-% \end{itemize}
-general_i_writingresourcefile=01010_I_Gravando arquivo com os Resource strings: $1
-% This message is shown when the compiler writes the Resource String Table
-% file containing all the resource strings for a program.
-general_e_errorwritingresourcefile=01011_E_Gravando arquivo com os Resource strings: $1
-% This message is shown when the compiler encountered an error when writing
-% the Resource String Table file
-general_i_fatal=01012_I_Erro fatal:
-% Prefix for Fatal Errors
-general_i_error=01013_I_Erro:
-% Prefix for Errors
-general_i_warning=01014_I_Aviso:
-% Prefix for Warnings
-general_i_note=01015_I_Nota:
-% Prefix for Notes
-general_i_hint=01016_I_Sugestão:
-% Prefix for Hints
-general_e_path_does_not_exist=01017_E_Caminho "$1" não existe
-% The specified path does not exist.
-general_f_compilation_aborted=01018_F_Compilação abortada
-% Compilation was aborted.
-general_i_number_of_warnings=01021_I_Ocorreram $1 warning(s)
-% Total number of warnings issued during compilation.
-general_i_number_of_hints=01022_I_Feitas $1 sugestões
-% Total number of hints issued during compilation.
-general_i_number_of_notes=01023_I_Feitos $1 comentários 
-% Total number of notes issued during compilation.
-% \end{description}
-#
-# Scanner
-#
-# 02063 is the last used one
-#
-% \section{Scanner messages.}
-% This section lists the messages that the scanner emits. The scanner takes
-% care of the lexical structure of the pascal file, i.e. it tries to find
-% reserved words, strings, etc. It also takes care of directives and
-% conditional compiling handling.
-% \begin{description}
-scan_f_end_of_file=02000_F_Fim inesperado de arquivo
-% this typically happens in one of the following cases :
-% \begin{itemize}
-% \item The source file ends before the final \var{end.} statement. This
-% happens mostly when the \var{begin} and \var{end} statements aren't
-% balanced;
-% \item An include file ends in the middle of a statement.
-% \item A comment was not closed
-% \end{itemize}
-scan_f_string_exceeds_line=02001_F_String não fechado na mesma linha
-% There is a missing closing ' in a string, so it occupies
-% multiple lines.
-scan_f_illegal_char=02002_F_caracter inválido "$1" ($2)
-% An illegal character was encountered in the input file.
-scan_f_syn_expected=02003_F_Erro de sintaxe "$1" esperado mas "$2" encontrado
-% This indicates that the compiler expected a different token than
-% the one you typed. It can occur almost everywhere where you make a
-% mistake against the pascal language.
-scan_t_start_include_file=02004_TL_Começou a ler include file $1
-% When you provide the \var{-vt} switch, the compiler tells you
-% when it starts reading an included file.
-scan_w_comment_level=02005_W_Encontrado comentário de nível $1
-% When the \var{-vw} switch is used, then the compiler warns you if
-% it finds nested comments. Nested comments are not allowed in Turbo Pascal
-% and can be a possible source of errors.
-scan_n_ignored_switch=02008_N_Ignorada diretiva "$1" do compilador
-% With \var{-vn} on, the compiler warns if it ignores a switch
-scan_w_illegal_switch=02009_W_Diretiva de compilador inválida "$1"
-% You included a compiler switch (i.e. \var{\{\$... \}}) which the compiler
-% does not recognise
-scan_w_switch_is_global=02010_W_Diretiva global do compilador em local inválido
-% The compiler switch is misplaced, and should be located at
-% the start of the unit or program.
-scan_e_illegal_char_const=02011_E_Constante caracter inválida
-% This happens when you specify a character with its ASCII code, as in
-% \var{\#96}, but the number is either illegal, or out of range.
-scan_f_cannot_open_input=02012_F_Arquivo "$1" não encontrado
-% \fpc cannot find the program or unit source file you specified on the
-% command line.
-scan_f_cannot_open_includefile=02013_F_Includefile "$1" não encontrado
-% \fpc cannot find the source file you specified in a \var{\{\$include ..\}}
-% statement.
-scan_e_illegal_pack_records=02015_E_Especificador de alinhamento de registro inválido "$1"
-% You are specifying the \var{\{\$PACKRECORDS n\} } or \var{\{\$ALIGN n\} }
-% with an illegal value for \var{n}. For \$PACKRECORDS valid alignments are 1, 2, 4, 8, 16, 32, C,
-% NORMAL, DEFAULT, and for \$ALIGN valid alignment are 1, 2, 4, 8, 16, 32, ON,
-% OFF. Under mode MacPas \$ALIGN also supports MAC68K, POWER and RESET.
-scan_e_illegal_pack_enum=02016_E_Especificador de tamanho mínimo de variável tipo enum inválido "$1"
-% You are specifying the \var{\{\$PACKENUM n\}} with an illegal value for
-% \var{n}. Only 1,2,4, NORMAL or DEFAULT are valid here.
-scan_e_endif_expected=02017_E_$ENDIF esperado para $1 $2 definidos em $3 na linha $4
-% Your conditional compilation statements are unbalanced.
-scan_e_preproc_syntax_error=02018_E_Erro de sintaxe na interpretação(parse) de uma expressão de compilação condicional
-% There is an error in the expression following the \var{\{\$if ..\}}, $ifc or $setc compiler
-% directives.
-scan_e_error_in_preproc_expr=02019_E_Avaliação de uma expressão de compilação condicional
-% There is an error in the expression following the \var{\{\$if ..\}}, $ifc or $setc compiler
-% directives.
-scan_w_macro_cut_after_255_chars=02020_W_O tamanho máximo de uma macro está limitado a 255 caracteres
-% The contents of macros cannot be longer than 255 characters.
-scan_e_endif_without_if=02021_E_ENDIF sem correspondente IF(N)DEF
-% Your \var{\{\$IFDEF ..\}} and {\{\$ENDIF\}} statements aren't balanced.
-scan_f_user_defined=02022_F_Definido pelo usuário: $1
-% A user defined fatal error occurred. see also the \progref
-scan_e_user_defined=02023_E_Definido pelo usuário: $1
-% A user defined error occurred. see also the \progref
-scan_w_user_defined=02024_W_Definido pelo usuário: $1
-% A user defined warning occurred. see also the \progref
-scan_n_user_defined=02025_N_Definido pelo usuário: $1
-% A user defined note was encountered. see also the \progref
-scan_h_user_defined=02026_H_Definido pelo usuário: $1
-% A user defined hint was encountered. see also the \progref
-scan_i_user_defined=02027_I_Definido pelo usuário: $1
-% User defined information was encountered. see also the \progref
-scan_e_keyword_cant_be_a_macro=02028_E_Macro que substitui palavra chave não tem efeito
-% You cannot redefine keywords with macros.
-scan_f_macro_buffer_overflow=02029_F_Overflow no buffer de macros durante leitura/expansão de macro
-% Your macro or its result was too long for the compiler.
-scan_w_macro_too_deep=02030_W_Mais de 16 níveis de aninhamento de macro.
-% When expanding a macro, macros have been nested to a level of 16.
-% The compiler will expand no further, since this may be a sign that
-% recursion is used.
-scan_w_wrong_styled_switch=02031_W_Diretivas de compilador não são aceitas em comentários tipo //
-% Compiler switches should be in normal pascal style comments.
-scan_d_handling_switch=02032_DL_Tratando diretiva "$1"
-% When you set debugging info on (\var{-vd}) the compiler tells you when it
-% is evaluating conditional compile statements.
-scan_c_endif_found=02033_CL_ENDIF $1 encontrado
-% When you turn on conditional messages(\var{-vc}), the compiler tells you
-% where it encounters conditional statements.
-scan_c_ifdef_found=02034_CL_IFDEF $1 encontrado, $2
-% When you turn on conditional messages(\var{-vc}), the compiler tells you
-% where it encounters conditional statements.
-scan_c_ifopt_found=02035_CL_IFOPT $1 encontrado $2
-% When you turn on conditional messages(\var{-vc}), the compiler tells you
-% where it encounters conditional statements.
-scan_c_if_found=02036_CL_IF $1 encontrado, $2
-% When you turn on conditional messages(\var{-vc}), the compiler tells you
-% where it encounters conditional statements.
-scan_c_ifndef_found=02037_CL_IFNDEF $1 encontrado, $2
-% When you turn on conditional messages(\var{-vc}), the compiler tells you
-% where it encounters conditional statements.
-scan_c_else_found=02038_CL_ELSE $1 encontrado, $2
-% When you turn on conditional messages(\var{-vc}), the compiler tells you
-% where it encounters conditional statements.
-scan_c_skipping_until=02039_CL_Desprezando até...
-% When you turn on conditional messages(\var{-vc}), the compiler tells you
-% where it encounters conditional statements, and whether it is skipping or
-% compiling parts.
-scan_i_press_enter=02040_I_Tecle <return> para continuar
-% When the \var{-vi} switch is used, the compiler stops compilation
-% and waits for the \var{Enter} key to be pressed when it encounters
-% a \var{\{\$STOP\}} directive.
-scan_w_unsupported_switch=02041_W_Diretiva não suportada "$1"
-% When warnings are turned on (\var{-vw}) the compiler warns you about
-% unsupported switches. This means that the switch is used in Delphi or
-% Turbo Pascal, but not in \fpc
-scan_w_illegal_directive=02042_W_Diretiva de compilador inválida "$1"
-% When warings are turned on (\var{-vw}) the compiler warns you about
-% unrecognised switches. For a list of recognised switches, \progref
-scan_t_back_in=02043_TL_De volta em $1
-% When you use (\var{-vt}) the compiler tells you when it has finished
-% reading an include file.
-scan_w_unsupported_app_type=02044_W_Application type não suportado: "$1"
-% You get this warning, if you specify an unknown application type
-% with the directive \var{\{\$APPTYPE\}}
-scan_w_app_type_not_support=02045_W_APPTYPE não suportado pelo Sist.Op. de execução
-% The \var{\{\$APPTYPE\}} directive is supported by certain operating systems only.
-scan_w_description_not_support=02046_W_Diretiva DESCRIPTION não é suportada pelo Sist.Op. de execução
-% The \var{\{\$DESCRIPTION\}} directive is not supported on this target OS
-scan_n_version_not_support=02047_N_Diretiva VERSION não é suportada pelo Sist.Op. de execução
-% The \var{\{\$VERSION\}} directive is not supported on this target OS
-scan_n_only_exe_version=02048_N_Diretiva VERSION é só para executáveis ou DLLs
-% The \var{\{\$VERSION\}} directive is only used for executable or DLL sources.
-scan_w_wrong_version_ignored=02049_W_Formato da diretiva VERSION errado "$1"
-% The \var{\{\$VERSION\}} directive format is majorversion.minorversion
-% where majorversion and minorversion are words.
-scan_e_illegal_asmmode_specifier=02050_E_Valor inválido na diretiva ASMMODE "$1"
-% When you specify an assembler mode with the \var{\{\$ASMMODE xxx\}}
-% the compiler didn't recognize the mode you specified.
-scan_w_no_asm_reader_switch_inside_asm=02051_W_Não é possível trocar tipo de assembly dentro de 1 trecho em assembly, a diretiva "$1" será válida só no próximo trecho assembly
-% It is not possible to switch from one assembler reader to another
-% inside an assembler block. The new reader will be used for next
-% assembler statements only.
-scan_e_wrong_switch_toggle=02052_E_Valor de diretiva inválido, use ON/OFF ou +/-
-% You need to use ON or OFF or a + or - to toggle the switch
-scan_e_resourcefiles_not_supported=02053_E_Resource files não são suportados no Sist.Op. de execução
-% The target you are compiling for doesn't support resource files.
-scan_w_include_env_not_found=02054_W_Variável de ambiente "$1" não encontrada
-% The included environment variable can't be found in the environment, it will
-% be replaced by an empty string instead.
-scan_e_invalid_maxfpureg_value=02055_E_Valor inválido para diretiva MAXFPUREGISTERS
-% Valid values for this directive are 0..8 and NORMAL/DEFAULT
-scan_w_only_one_resourcefile_supported=02056_W_O Sist.Op. de execução suporta somente 1 resource file
-% The target you are compiling for supports only one resource file.
-% The first resource file found is used, the others are discarded.
-scan_w_macro_support_turned_off=02057_W_Suporte a macros foi desativado
-% A macro declaration has been found, but macro support is currently off,
-% so the declaration will be ignored. To turn macro support on compile with
-% -Sm on the commandline or add \{\$MACRO ON\} in the source
-scan_e_invalid_interface_type=02058_E_Tipo de interface inválido. Valores válidos são COM, CORBA or DEFAULT.
-% The interface type that was specified is not supported
-scan_w_appid_not_support=02059_W_APPID só é suportada pelo Sist.Op. de execução PalmOS
-% The \var{\{\$APPID\}} directive is only supported for the PalmOS target.
-scan_w_appname_not_support=02060_W_APPNAME só é suportada pelo Sist.Op. de execução PalmOS
-% The \var{\{\$APPNAME\}} directive is only supported for the PalmOS target.
-scan_e_string_exceeds_255_chars=02061_E_Constantes string não podem exceder 255 caracteres
-% A single string constant can contain at most 255 chars. Try splitting up the
-% string in multiple smaller parts and concatenate them with a + operator.
-scan_f_include_deep_ten=02062_F_Número de include files aninhados excede 16 níveis
-% When including include files the files have been nested to a level of 16.
-% The compiler will expand no further, since this may be a sign that
-% recursion is used.
-scan_e_too_many_push=02063_F_Número máximo de níveis de PUSH excedido
-% A maximum of 20 levels is allowed. This error occurs only in mode MacPas.
-scan_e_too_many_pop=02064_E_POP não precedido de PUSH
-% This error occurs only in mode MacPas.
-scan_e_error_macro_lacks_value=02065_E_Macro ou variável de tempo de compilação "$1" vazia ou sem valor atribuído
-% Thus the conditional compile time expression cannot be evaluated.
-scan_e_wrong_switch_toggle_default=02066_E_Valor de diretiva inválido, use ON/OFF/DEFAULT ou +/-/*
-% You need to use ON or OFF or DEFAULT or a + or - or * to toggle the switch
-scan_e_mode_switch_not_allowed=02067_E_Diretiva Mode "$1" não permitida aqui
-% A mode switch has already been encountered, or, in case of option -Mmacpas,
-% a mode switch occur after UNIT.
-scan_e_error_macro_undefined=02068_E_Variável de tempo de compilação "$1" não definida
-% Thus the conditional compile time expression cannot be evaluated. Only in mode MacPas.
-scan_e_utf8_bigger_than_65535=02069_E_Encontrado caracter com código UTF-8 maior do que 65535
-% \fpc handles utf-8 strings internally as widestrings e.g. the char codes are limited to 65535
-scan_e_utf8_malformed=02070_E_String UTF-8 com caracteres inválidos
-% The given string isn't a valid UTF-8 string
-scan_c_switching_to_utf8=02071_C_Encontrada assinatura UTF-8, conteúdo do arquivo será tratado como sendo UTF-8
-% The compiler found an UTF-8 encoding signature (\$ef, \$bb, \$bf) at the beginning of a file,
-% so it interprets it as an UTF-8 file
-scan_e_compile_time_typeerror=02072_E_Expressão em tempo de compilação: Esperado $1 mas encontrado $2 em $3
-% Type check of a compile time expression failed.
-scan_n_app_type_not_support=02073_N_Diretiva APPTYPE não suportada pelo sistema operacional de destino
-% The \var{\{\$APPTYPE\}} directive is supported by certain operating systems only.
-scan_e_illegal_optimization_specifier=02074_E_Especificada otimizacao ilegal "$1"
-% When you specify an optimization with the \var{\{\$OPTIMIZATION xxx\}}
-% the compiler didn't recognize the optimization you specified.
-scan_w_setpeflags_not_support=02075_W_Diretiva SETPEFLAGS não suportada pelo sistema operacional de destino
-% The \var{\{\$SETPEFLAGS\}} directive is not supported by the target OS
-scan_w_imagebase_not_support=02076_W_Diretiva IMAGEBASE não suportada pelo sistema operacional de destino
-% The \var{\{\$IMAGEBASE\}} directive is not supported by the target OS
-scan_w_minstacksize_not_support=02077_W_Diretiva MINSTACKSIZE não suportada pelo sistema operacional de destino
-% The \var{\{\$MINSTACKSIZE\}} directive is not supported by the target OS
-scan_w_maxstacksize_not_support=02078_W_Diretiva MAXSTACKSIZE não suportada pelo sistema operacional de destino
-% The \var{\{\$MAXSTACKSIZE\}} directive is not supported by the target OS
-% \end{description}
-#
-# Parser
-#
-# 03192 is the last used one
-#
-% \section{Parser messages}
-% This section lists all parser messages. The parser takes care of the
-% semantics of you language, i.e. it determines if your pascal constructs
-% are correct.
-% \begin{description}
-parser_e_syntax_error=03000_E_Parser - Erro de sintaxe
-% An error against the Turbo Pascal language was encountered. This happens
-% typically when an illegal character is found in the sources file.
-parser_e_dont_nest_interrupt=03004_E_INTERRUPT procedure não pode ser local tem que ser global
-% An \var{INTERRUPT} procedure must be global.
-parser_w_proc_directive_ignored=03005_W_Tipo de procedure "$1" ignorado
-% The specified is ignored by FPC programs.
-parser_e_no_overload_for_all_procs=03006_E_OVERLOAD usado para "$1". Todas declarações devem usar OVERLOAD
-% When you want to use overloading using the \var{OVERLOAD} directive, then
-% all declarations need to have \var{OVERLOAD} specified.
-parser_e_export_name_double=03008_E_Funções exportadas com o nome externo "$1" igual
-% Exported function names inside a specific DLL must all be different
-parser_e_export_ordinal_double=03009_E_Funções exportadas com o index externo "$1" igual
-% Exported function names inside a specific DLL must all be different
-parser_e_export_invalid_index=03010_E_Valor de index externo de função exportada inválido
-% DLL function index must be in the range \var{1..\$FFFF}
-parser_w_parser_reloc_no_debug=03011_W_Informações de depuração para DLL relocável ou para executável $1 não funcionaram. Depuração ignorada.
-parser_w_parser_win32_debug_needs_WN=03012_W_Para permitir depuração de código win32 voce precisa desabilitar opção de relocação com a opção -WN
-% Stabs info is wrong for relocatable DLL or EXES use -WN
-% if you want to debug win32 executables.
-parser_e_constructorname_must_be_init=03013_E_Nome do método Constructor deve ser INIT
-% You are declaring an object constructor with a name which is not \var{init}, and the
-% \var{-Ss} switch is in effect. See the \var{-Ss} switch (\seeo{Ss}).
-parser_e_destructorname_must_be_done=03014_E_Nome do método Destructor deve ser DONE
-% You are declaring an object destructor with a name which is not \var{done}, and the
-% \var{-Ss} switch is in effect. See the \var{-Ss} switch (\seeo{Ss}).
-parser_e_proc_inline_not_supported=03016_E_Uso de procedures tipo INLINE como no C++ não suportado
-% You tried to compile a program with C++ style inlining, and forgot to
-% specify the \var{-Si} option (\seeo{Si}). The compiler doesn't support C++
-% styled inlining by default.
-parser_w_constructor_should_be_public=03018_W_Métodos Constructor devem estar em escopo "public" na classe
-% Constructors must be in the 'public' part of an object (class) declaration.
-parser_w_destructor_should_be_public=03019_W_Métodos Destructor devem estar em escopo "public" na classe
-% Destructors must be in the 'public' part of an object (class) declaration.
-parser_n_only_one_destructor=03020_N_Classes devem ter somente 1 método destructor
-% You can declare only one destructor for a class.
-parser_e_no_local_objects=03021_E_Declaração de classes em escopo "local" não permitida. Elas devem estar em escopo "global"
-% Classes must be defined globally. They cannot be defined inside a
-% procedure or function
-parser_f_no_anonym_objects=03022_F_Classes sem métodos e não derivadas de outras(anônimas) não são permitidas
-% An invalid object (class) declaration was encountered, i.e. an
-% object or class without methods that isn't derived from another object or
-% class. For example:
-% \begin{verbatim}
-% Type o = object
-%          a : longint;
-%          end;
-% \end{verbatim}
-% will trigger this error.
-parser_n_object_has_no_vmt=03023_N_Não há entrada na VMT para o objeto "$1"
-% This is a note indicating that the declared object has no
-% virtual method table.
-parser_e_illegal_parameter_list=03024_E_Lista de argumentos inválida(tipos de dados diferem dos parâmetros)
-% You are calling a function with parameters that are of a different type than
-% the declared parameters of the function.
-parser_e_wrong_parameter_size=03026_E_Número de parâmetros errado
-% There is an error in the parameter list of the function or procedure,
-% the number of parameters is not correct.
-parser_e_overloaded_no_procedure=03027_E_Método que está fazendo overload e base do overload "$1" são de tipo diferente (function/procedure)
-% The compiler encountered a symbol with the same name as an overloaded
-% function, but it is not a function it can overload.
-parser_e_overloaded_have_same_parameters=03028_E_Método tem mesma lista parâmetros do método sobre o qual queremos fazer overload
-% You're declaring overloaded functions, but with the same parameter list.
-% Overloaded function must have at least 1 different parameter in their
-% declaration.
-parser_e_header_dont_match_forward=03029_E_Tipo de retorno ou qualificador da função difere na declaração forward "$1"
-% You declared a function with same parameters but
-% different result type or function modifiers.
-parser_e_header_different_var_names=03030_E_Header de função "$1" não combina com o do forward : nome de variável trocado $2 => $3
-% You declared the function in the \var{interface} part, or with the
-% \var{forward} directive, but define it with a different parameter list.
-parser_n_duplicate_enum=03031_N_Valores especificados em tipos enumerados devem estar em ordem crescente
-% \fpc allows enumeration constructions as in C. Given the following
-% declaration two declarations:
-% \begin{verbatim}
-% type a = (A_A,A_B,A_E:=6,A_UAS:=200);
-% type a = (A_A,A_B,A_E:=6,A_UAS:=4);
-% \end{verbatim}
-% The second declaration would produce an error. \var{A\_UAS} needs to have a
-% value higher than \var{A\_E}, i.e. at least 7.
-parser_e_no_with_for_variable_in_other_segments=03033_E_"With" não pode ser usado para variáveis in segmentos diferentes de memória
-% With stores a variable locally on the stack,
-% but this is not possible if the variable belongs to another segment.
-parser_e_too_much_lexlevel=03034_E_Mais de 31 funções aninhadas
-% You can nest function definitions only 31 times.
-parser_e_range_check_error=03035_E_Erro de "range" durante apuração de constantes
-% The constants are out of their allowed range.
-parser_w_range_check_error=03036_W_Erro de "range" durante apuração de constantes
-% The constants are out of their allowed range.
-parser_e_double_caselabel=03037_E_Condição duplicada em 1 comando case
-% You are specifying the same label 2 times in a \var{case} statement.
-parser_e_case_lower_less_than_upper_bound=03038_E_O valor superior de 1 "range" especificado num "case" é menor que o valor inferior
-% The upper bound of a \var{case} label is less than the lower bound and this
-% is useless
-parser_e_type_const_not_possible=03039_E_Constantes do tipo "class" ou "object" não são permitidas
-% You cannot declare a constant of type class or object.
-parser_e_no_overloaded_procvars=03040_E_Não é permitido uso de variáveis tipo "function" em functions que sofrerão overload
-% You are trying to assign an overloaded function to a procedural variable.
-% This is not allowed
-parser_e_invalid_string_size=03041_E_Tamanho de string deve estar entre 1 e 255 bytes
-% The length of a shortstring in Pascal is limited to 255 characters. You are
-% trying to declare a string with length lower than 1 or greater than 255
-parser_w_use_extended_syntax_for_objects=03042_W_Use a sintaxe extendida de NEW e DISPOSE para instâncias de objetos
-% If you have a pointer \var{a} to a class type, then the statement
-% \var{new(a)} will not initialize the class (i.e. the constructor isn't
-% called), although space will be allocated. you should issue the
-% \var{new(a,init)} statement. This will allocate space, and call the
-% constructor of the object
-parser_w_no_new_dispose_on_void_pointers=03043_W_Não há sentido em usar NEW ou DISPOSE para pointers untyped
-parser_e_no_new_dispose_on_void_pointers=03044_E_Não é possível usar NEW e DISPOSE para pointers untyped
-% You cannot use \var{new(p)} or \var{dispose(p)} if \var{p} is an untyped pointer
-% because no size is associated to an untyped pointer.
-% Accepted for compatibility in \var{tp} and \var{delphi} modes.
-parser_e_class_id_expected=03045_E_Identificador de classe ou objeto esperado antes do ponto
-% This happens when the compiler scans a procedure declaration that contains
-% a dot,
-% i.e., a object or class method, but the type in front of the dot is not
-% a known type.
-parser_e_no_type_not_allowed_here=03046_E_Identificador de type não permitido neste contexto
-% You cannot use a type inside an expression.
-parser_e_methode_id_expected=03047_E_Método esperado após o ponto
-% This identifier is not a method.
-% This happens when the compiler scans a procedure declaration that contains
-% a dot, i.e., a object or class method, but the procedure name is not a
-% procedure of this type.
-parser_e_header_dont_match_any_member=03048_E_Header de procedure/função "$1" não identifica nenhum método desta classe
-% This identifier is not a method.
-% This happens when the compiler scans a procedure declaration that contains
-% a dot, i.e., a object or class method, but the procedure name is not a
-% procedure of this type.
-parser_d_procedure_start=03049_DL_procedure ou function $1
-% When using the \var{-vd} switch, the compiler tells you when it starts
-% processing a procedure or function implementation.
-parser_e_error_in_real=03050_E_Constante de ponto flutuante inválida
-% The compiler expects a floating point expression, and gets something else.
-parser_e_fail_only_in_constructor=03051_E_"FAIL" só pode ser usado em "constructors"
-% You are using the \var{fail} keyword outside a constructor method.
-parser_e_no_paras_for_destructor=03052_E_Métodos Destructor não podem ter parâmetros
-% You are declaring a destructor with a parameter list. Destructor methods
-% cannot have parameters.
-parser_e_only_class_methods_via_class_ref=03053_E_Somente métodos de classe podem ser usados numa referência de classe
-% This error occurs in a situation like the following:
-% \begin{verbatim}
-% Type :
-%    Tclass = Class of Tobject;
-%
-% Var C : TClass;
-%
-% begin
-% ...
-% C.free
-% \end{verbatim}
-% \var{Free} is not a class method and hence cannot be called with a class
-% reference.
-parser_e_only_class_methods=03054_E_Somente métodos da classe podem ser acessados em métodos de classe
-% This is related to the previous error. You cannot call a method of an object
-% from a inside a class method. The following code would produce this error:
-% \begin{verbatim}
-% class procedure tobject.x;
-%
-% begin
-%   free
-% \end{verbatim}
-% Because free is a normal method of a class it cannot be called from a class
-% method.
-parser_e_case_mismatch=03055_E_Constante usada numa cláusula de um comando "case" não combina com o tipo da variável do "case"
-% One of the labels is not of the same type as the case variable.
-parser_e_illegal_symbol_exported=03056_E_O símbolo não pode ser exportado de 1 library. Só procedures ou functions
-% You can only export procedures and functions when you write a library. You
-% cannot export variables or constants.
-parser_w_should_use_override=03057_W_Um método herdado está escondido(hidden) por "$1". Verifique se não tem que usar a diretiva OVERRIDE
-% A method that is declared \var{virtual} in a parent class, should be
-% overridden in the descendent class with the \var{override} directive. If you
-% don't specify the \var{override} directive, you will hide the parent method;
-% you will not override it.
-parser_e_nothing_to_be_overridden=03058_E_Não há método em classe ancestral com este nome para sofrer overriden : "$1"
-% You are trying to \var{override} a virtual method of a parent class that does
-% not exist.
-parser_e_no_procedure_to_access_property=03059_E_Faltou a cláusula "read" na declaração da propriedade
-% You specified no \var{read} directive for a property.
-parser_w_stored_not_implemented=03060_W_Descontinuada
-% The \var{stored} directive is not yet implemented
-parser_e_ill_property_access_sym=03061_E_Símbolo inválido para acesso a uma propriedade(a propriedade é 1 array?)
-% There is an error in the \var{read} or \var{write} directives for an array
-% property. When you declare an array property, you can only access it with
-% procedures and functions. The following code would cause such an error.
-% \begin{verbatim}
-% tmyobject = class
-%   i : integer;
-%   property x [i : integer]: integer read I write i;
-% \end{verbatim}
-%
-parser_e_cant_access_protected_member=03062_E_Campo de objeto declarado como protected não pode ser acessado aqui
-% Fields that are declared in a \var{protected} section of an object or class
-% declaration cannot be accessed outside the module where the object is
-% defined, or outside descendent object methods.
-parser_e_cant_access_private_member=03063_E_Campo de objeto declarado como private não pode ser acessado aqui
-% Fields that are declared in a \var{private} section of an object or class
-% declaration cannot be accessed outside the module where the class is
-% defined.
-parser_e_overridden_methods_not_same_ret=03066_E_metodos envolvidos em override devem ter o mesmo tipo de retorno: "$2" faz override em "$1" que tem outro tipo de retorno
-% If you declare overridden methods in a class definition, they must
-% have the same return type.
-parser_e_dont_nest_export=03067_E_Functions/procedures não podem ser declaradas aninhadas em functions/procedures que serão exportadas
-% You cannot declare a function or procedure within a function or procedure
-% that was declared as an export procedure.
-parser_e_methods_dont_be_export=03068_E_métodos não podem ser exportados
-% You cannot declare a procedure that is a method for an object as
-% \var{export}ed.
-parser_e_call_by_ref_without_typeconv=03069_E_argumentos de chamadas por referência tem que ter mesmo atributo que o parâmetro correspondente: Achado "$1" esperado "$2"
-% When calling a function declared with \var{var} parameters, the variables in
-% the function call must be of exactly the same type. There is no automatic
-% type conversion.
-parser_e_no_super_class=03070_E_Metodo não é de classe ancestral da que o está chamando
-% When calling inherited methods, you are trying to call a method of a non-related
-% class. You can only call an inherited method of a parent class.
-parser_e_self_not_in_method=03071_E_Tentativa de usar "SELF" fora de um método
-% You are trying to use the \var{self} parameter outside an object's method.
-% Only methods get passed the \var{self} parameters.
-parser_e_generic_methods_only_in_methods=03072_E_só pode usar uma chamada no formato classe.metodo dentro de um metodo
-% A construction like \var{sometype.somemethod} is only allowed in a method.
-parser_e_illegal_colon_qualifier=03073_E_Uso de ':' em local inválido
-% You are using the format \var{:} (colon) 2 times on an expression that
-% is not a real expression.
-parser_e_illegal_set_expr=03074_E_Erro de range na declaração de set: Elemento(s) duplicado(s) ou fora de faixa p/o tipo de dado
-% The declaration of a set contains an error. Either one of the elements is
-% outside the range of the set type, either two of the elements are in fact
-% the same.
-parser_e_pointer_to_class_expected=03075_E_Esperada pointer para um objeto
-% You specified an illegal type in a \var{new} statement.
-% The extended syntax of \var{new} needs an object as a parameter.
-parser_e_expr_have_to_be_constructor_call=03076_E_Expressão deve ser uma chamada a um constructor
-% When using the extended syntax of \var{new}, you must specify the constructor
-% method of the object you are trying to create. The procedure you specified
-% is not a constructor.
-parser_e_expr_have_to_be_destructor_call=03077_E_Expressão deve ser uma chamada a um destructor
-% When using the extended syntax of \var{dispose}, you must specify the
-% destructor method of the object you are trying to dispose of.
-% The procedure you specified is not a destructor.
-parser_e_invalid_record_const=03078_E_Campos declarados em ordem diferente da declaração do record
-% When declaring a constant record, you specified the fields in the wrong
-% order.
-parser_e_false_with_expr=03079_E_O tipo de expressão deve ser de class ou de record
-% A \var{with} statement needs an argument that is of the type \var{record}
-% or \var{class}. You are using \var{with} on an expression that is not of
-% this type.
-parser_e_void_function=03080_E_Subrotinas/métodos do tipo "procedure" não podem retornar valor
-% In \fpc, you can specify a return value for a function when using
-% the \var{exit} statement. This error occurs when you try to do this with a
-% procedure. Procedures cannot return a value.
-parser_e_constructors_always_objects=03081_E_Constructors e destructors devem ser métodos
-% You're declaring a procedure as destructor or constructor, when the
-% procedure isn't a class method.
-parser_e_operator_not_overloaded=03082_E_Um dos operandos não está na definição deste operador
-% You're trying to use an overloaded operator when it is not overloaded for
-% this type.
-parser_e_no_such_assignment=03083_E_Impossível overload com dados do mesmo tipo
-% You can not overload assignment for types
-% that the compiler considers as equal.
-parser_e_overload_impossible=03084_E_Combinação de tipos do operador, dos argumentos e tipo de retorno incompatível
-% The combination of operator, arguments and return type are
-% incompatible.
-parser_e_no_reraise_possible=03085_E_Uso de raise não é possível aqui
-% You are trying to raise an exception where it is not allowed. You can only
-% raise exceptions in an \var{except} block.
-parser_e_no_new_or_dispose_for_classes=03086_E_Esta sintaxe de new ou dispose não pode ser aplicada a classes
-% You cannot generate an instance of a class with the extended syntax of
-% \var{new}. The constructor must be used for that. For the same reason, you
-% cannot call \var{dispose} to de-allocate an instance of a class, the
-% destructor must be used for that.
-parser_e_procedure_overloading_is_off=03088_E_Overload de procedures está desabilitado(ver diretiva -S)
-% When using the \var{-So} switch, procedure overloading is switched off.
-% Turbo Pascal does not support function overloading.
-parser_e_overload_operator_failed=03089_E_Este tipo de operador não pode sofrer overload
-% You are trying to overload an operator which cannot be overloaded.
-% The following operators can be overloaded :
-% \begin{verbatim}
-%    +, -, *, /, =, >, <, <=, >=, is, as, in, **, :=
-% \end{verbatim}
-parser_e_comparative_operator_return_boolean=03090_E_Function que faça overload no operador = deve retornar "boolean"
-% When overloading the \var{=} operator, the function must return a boolean
-% value.
-parser_e_only_virtual_methods_abstract=03091_E_Somente métodos virtuais podem ser declarados "abstract"
-% You are declaring a method as abstract, when it is not declared to be
-% virtual.
-parser_f_unsupported_feature=03092_F_Feature não suportada!
-% You're trying to force the compiler into doing something it cannot do yet.
-parser_e_mix_of_classes_and_objects=03093_E_A mistura de diferentes tipos de objetos(class, object, interface, etc) não é permitida
-% You cannot derive \var{objects}, \var{classes}, \var{cppclasses} and \var{interfaces} interttwined . E.g.
-% a class cannot have an object as parent and vice versa.
-parser_w_unknown_proc_directive_ignored=03094_W_Diretiva desconhecida foi ignorada: "$1"
-% The procedure directive you specified is unknown.
-parser_e_absolute_only_one_var=03095_E_Absolute pode ser usado em linha que declare somente 1 variável e redefinir variável ou "typed constant"
-% You cannot specify more than one variable before the \var{absolute} directive.
-% Thus, the following construct will provide this error:
-% \begin{verbatim}
-% Var Z : Longint;
-%     X,Y : Longint absolute Z;
-% \end{verbatim}
-% \item [ absolute can only be associated a var or const ]
-% The address of a \var{absolute} directive can only point to a variable or a
-% typed constant. Therefore, the following code will produce this error:
-% \begin{verbatim}
-%   Procedure X;
-%
-%  var p : longint absolute x;
-% \end{verbatim}
-%
-parser_e_absolute_only_to_var_or_const=03096_E_Absolute só pode redefinir 1 variável ou constante
-% The address of a \var{absolute} directive can only point to a variable or
-% constant. Therefore, the following code will produce this error:
-% \begin{verbatim}
-%   Procedure X;
-%
-%  var p : longint absolute x;
-% \end{verbatim}
-%
-parser_e_initialized_only_one_var=03097_E_Não pode usar valor inicial em linha que declare mais de 1 variável
-% You cannot specify more than one variable with a initial value
-% in Delphi mode.
-parser_e_abstract_no_definition=03098_E_Métodos abstract só podem ser declarados. Não podem conter código
-% Abstract methods can only be declared, you cannot implement them. They
-% should be overridden by a descendant class.
-parser_e_overloaded_must_be_all_global=03099_E_Esta função que está sofrendo overload não pode ser local (deve aparecer na interface)
-% You are defining a overloaded function in the implementation part of a unit,
-% but there is no corresponding declaration in the interface part of the unit.
-parser_w_virtual_without_constructor=03100_W_Objeto/classe contém métodos virtuais mas não contém contructor em "$1"
-% If you declare objects or classes that contain virtual methods, you need
-% to have a constructor and destructor to initialize them. The compiler
-% encountered an object or class with virtual methods that doesn't have
-% a constructor/destructor pair.
-parser_c_macro_defined=03101_CL_Macro definida: $1
-% When \var{-vc} is used, the compiler tells you when it defines macros.
-parser_c_macro_undefined=03102_CL_Macro liberada ou "des-definida": $1
-% When \var{-vc} is used, the compiler tells you when it undefines macros.
-parser_c_macro_set_to=03103_CL_Macro $1 assumiu valor $2
-% When \var{-vc} is used, the compiler tells you what values macros get.
-parser_i_compiling=03104_I_Compilando "unit" $1
-% When you turn on information messages (\var{-vi}), the compiler tells you
-% what units it is recompiling.
-parser_u_parsing_interface=03105_UL_Interpretando "interface" da "unit" $1
-% This tells you that the reading of the interface
-% of the current unit starts
-parser_u_parsing_implementation=03106_UL_Interpretando "implementation" da "unit" $1
-% This tells you that the code reading of the implementation
-% of the current unit, library or program starts
-parser_d_compiling_second_time=03107_DL_Recompilando $1
-% When you request debug messages (\var{-vd}) the compiler tells you what
-% units it recompiles for the second time.
-parser_e_no_property_found_to_override=03109_E_Propriedade para sofrer override não existe
-% You want to override a property of a parent class, when there is, in fact,
-% no such property in the parent class.
-parser_e_only_one_default_property=03110_E_Tentativa de definir propriedade default para classe que já tem 1 default
-% You specified a property as \var{Default}, but the class already has a
-% default property, and a class can have only one default property.
-parser_e_property_need_paras=03111_E_A propriedade default deve ser uma "array property"
-% Only array properties of classes can be made \var{default} properties.
-parser_e_constructor_cannot_be_not_virtual=03112_E_Virtual constructors podem ser usados somente para classes
-% You cannot have virtual constructors in objects. You can only have them
-% in classes.
-parser_e_no_default_property_available=03113_E_Não há propriedade default disponível(nem por herança)
-% You are trying to access a default property of a class, but this class (or one of
-% its ancestors) doesn't have a default property.
-parser_e_cant_have_published=03114_E_A classe não pode ter uma "published section", use a diretiva {$M+}
-% If you want a \var{published} section in a class definition, you must
-% use the \var{\{\$M+\}} switch, whch turns on generation of type
-% information.
-parser_e_forward_declaration_must_be_resolved=03115_E_A declaração com forward da classe "$1" precisa ser resolvida aqui para poder usar esta classe como ancestral
-% To be able to use an object as an ancestor object, it must be defined
-% first. This error occurs in the following situation:
-% \begin{verbatim}
-%  Type ParentClas = Class;
-%       ChildClass = Class(ParentClass)
-%         ...
-%       end;
-% \end{verbatim}
-% Where \var{ParentClass} is declared but not defined.
-parser_e_no_local_operator=03116_E_Não pode fazer overload de operadores locais
-% You cannot overload locally, i.e. inside procedures or function
-% definitions.
-parser_e_proc_dir_not_allowed_in_interface=03117_E_A diretiva "$1" não é permitida seção "interface"
-% This procedure directive is not allowed in the \var{interface} section of
-% a unit. You can only use it in the \var{implementation} section.
-parser_e_proc_dir_not_allowed_in_implementation=03118_E_A diretiva "$1" não é permitida seção "implementation"
-% This procedure directive is not defined in the \var{implementation} section of
-% a unit. You can only use it in the \var{interface} section.
-parser_e_proc_dir_not_allowed_in_procvar=03119_E_A diretiva "$1" não é permitida na área de declaração de variáveis de 1 procedure/function
-% This procedure directive cannot be part of a procedural or function
-% type declaration.
-parser_e_function_already_declared_public_forward=03120_E_Procedure/function já foi declarada como Public/Forward "$1"
-% You will get this error if a function is defined as \var{forward} twice.
-% Or it is once in the \var{interface} section, and once as a \var{forward}
-% declaration in the \var{implmentation} section.
-parser_e_not_external_and_export=03121_E_Não pode usar EXPORT e EXTERNAL simultaneamente
-% These two procedure directives are mutually exclusive
-parser_w_not_supported_for_inline=03123_W_"$1" ainda não é suportada em "inline procedure/function"
-% Inline procedures don't support this declaration.
-parser_w_inlining_disabled=03124_W_O uso de INLINE está desabilitado(diretiva $I)
-% Inlining of procedures is disabled.
-parser_i_writing_browser_log=03125_I_Avisa que gravou log do símbolo $1 gerado pelo "symbol browser"
-% When information messages are on, the compiler warns you when it
-% writes the browser log (generated with the \var{\{\$Y+ \}} switch).
-parser_h_maybe_deref_caret_missing=03126_H_Pode estar faltando uma "pointer dereference". Meramente um comentário p/questões de sintaxe em relação ao Delphi p/exemplo
-% The compiler thinks that a pointer may need a dereference.
-parser_f_assembler_reader_not_supported=03127_F_Tipo de assembly não suportado
-% The selected assembler reader (with \var{\{\$ASMMODE xxx\}} is not
-% supported. The compiler can be compiled with or without support for a
-% particular assembler reader.
-parser_e_proc_dir_conflict=03128_E_Diretiva "$1" conflita com outras diretivas
-% You specified a procedure directive that conflicts with other directives.
-% for instance \var{cdecl} and \var{pascal} are mutually exclusive.
-parser_e_call_convention_dont_match_forward=03129_E_Interface/implementation "calling conventions" não combinam(cdecl?)
-% This error happens when you declare a function or procedure with
-% e.g. \var{cdecl;} but omit this directive in the implementation, or vice
-% versa. The calling convention is part of the function declaration, and
-% must be repeated in the function definition.
-parser_e_property_cant_have_a_default_value=03131_E_A propriedade não pode ter valor default(é tipo array ou set?)
-% Set properties or indexed properties cannot have a default value.
-parser_e_property_default_value_must_const=03132_E_O valor default de 1 propriedade deve ser uma constante
-% The value of a \var{default} declared property must be known at compile
-% time. The value you specified is only known at run time. This happens
-% .e.g. if you specify a variable name as a default value.
-parser_e_cant_publish_that=03133_E_Simbolo não pode ser published. Somente propriedades e variáveis "class type"
-% Only class type variables can be in a \var{published} section of a class
-% if they are not declared as a property.
-parser_e_cant_publish_that_property=03134_E_Propriedades com este tipo de dados não podem ser "published"
-% Properties in a \var{published} section cannot be array properties.
-% they must be moved to public sections. Properties in a \var{published}
-% section must be an ordinal type, a real type, strings or sets.
-parser_e_empty_import_name=03136_E_Procedures/functions que são exportadas de DLL's devem ter 1 "external name"
-% Some targets need a name for the imported procedure or a \var{cdecl} specifier
-parser_e_division_by_zero=03138_E_Divisão por zero
-% There is a division by zero encounted
-parser_e_invalid_float_operation=03139_E_Operação de ponto flutuante inválida
-% An operation on two real type values produced an overflow or a division
-% by zero.
-parser_e_array_lower_less_than_upper_bound=03140_E_Fim da faixa menor que o início da faixa
-% The upper bound of a an array declaration is less than the lower bound and this
-% is not possible
-parser_w_string_too_long=03141_W_Constante string "$1" é maior que a declaração da variável string "$2"
-% The size of the constant string is larger than the size you specified in
-% string type definition
-parser_e_string_larger_array=03142_E_Constante string maior do que o "array of char" a qual está sendo atribuída
-% The size of the constant string is larger than the size you specified in
-% the array[x..y] of char definition
-parser_e_ill_msg_expr=03143_E_Expressão inválida após uma diretiva
-% \fpc supports only integer or string values as message constants
-parser_e_ill_msg_param=03144_E_Métodos declarados com a diretiva {message}(message handlers) só podem ter 1 parâmetro e recebido por referêcia
-% A method declared with the \var{message}-directive as message handler
-% can take only one parameter which must be declared as call by reference
-% Parameters are declared as call by reference using the \var{var}-directive
-parser_e_duplicate_message_label=03145_E_Label de mensagem duplicado: "$1"
-% A label for a message is used twice in one object/class
-parser_e_self_in_non_message_handler=03146_E_"Self" só pode ser usado como parâmetro explícito em métodos declarados com diretiva {message}(message handlers)
-% The self parameter can only be passed explicitly to a method which
-% is declared as message handler.
-parser_e_threadvars_only_sg=03147_E_Variáveis "Threadvars" s´ podem ser "static" ou "global"
-% Threadvars must be static or global, you can't declare a thread
-% local to a procedure. Local variables are always local to a thread,
-% because every thread has its own stack and local variables
-% are stored on the stack
-parser_f_direct_assembler_not_allowed=03148_F_"Direct assembly" não é suportado quando usando formato binário de saída
-% You can't use direct assembler when using a binary writer, choose an
-% other outputformat or use an other assembler reader
-parser_w_no_objpas_use_mode=03149_W_Não carregue OBJPAS unit com "uses", use \{\$mode objfpc\} ou \{\$mode delphi\} ao invés disto
-% You are trying to load the ObjPas unit manually from a uses clause. This is
-% not a good idea. Use the \var{\{\$mode objfpc\}} or
-% \var{\{\$mode delphi\}}
-% directives which load the unit automatically
-parser_e_no_object_override=03150_E_Não é possível fazer OVERRIDE em métodos de "object's"
-% Override is not supported for objects, use \var{virtual} instead to override
-% a method of a parent object
-parser_e_cant_use_inittable_here=03151_E_Tipos de dados que requeiram inicialização/finalização não podem ser usados em registros "variant"
-% Some data type (e.g. \var{ansistring}) needs initialization/finalization
-% code which is implicitly generated by the compiler. Such data types
-% can't be used in the variant part of a record.
-parser_e_resourcestring_only_sg=03152_E_Resourcestrings só podem ser declarados static ou global
-% Resourcestring can not be declared local, only global or using the static
-% directive.
-parser_e_exit_with_argument_not__possible=03153_E_"Exit" com argumento neste contexto, não é permitido
-% an exit statement with an argument for the return value can't be used here, this
-% can happen e.g. in \var{try..except} or \var{try..finally} blocks
-parser_e_stored_property_must_be_boolean=03154_E_Símbolo de tipo de memoria deve ser booleano
-% If you specify a storage symbol in a property declaration, it must be of
-% the type boolean
-parser_e_ill_property_storage_sym=03155_E_Este símbolo não é permitido como símbolo memória
-% You can't use this type of symbol as storage specifier in property
-% declaration. You can use only methods with the result type boolean,
-% boolean class fields or boolean constants
-parser_e_only_publishable_classes_can__be_published=03156_E_Só é permitido publicar classes compiladas com a diretiva $M+
-% In the published section of a class can be only class as fields used which
-% are compiled in \var{\{\$M+\}} or which are derived from such a class. Normally
-% such a class should be derived from TPersitent
-parser_e_proc_directive_expected=03157_E_Esperada diretiva de procedure
-% When declaring a procedure in a const block you used a ; after the
-% procedure declaration after which a procedure directive must follow.
-% Correct declarations are:
-% \begin{verbatim}
-% const
-%   p : procedure;stdcall=nil;
-%   p : procedure stdcall=nil;
-% \end{verbatim}
-parser_e_invalid_property_index_value=03158_E_O valor do "index" de uma propriedade deve ser do tipo ordinal
-% The value you use to index a property must be of an ordinal type, for
-% example an integer or enumerated type.
-parser_e_procname_to_short_for_export=03159_E_Nome de procedure/function que será exportada tem que ter no mínimo 2 caracteres
-% The length of the procedure/function name must be at least 2 characters
-% long. This is because of a bug in dlltool which doesn't parse the .def
-% file correct with a name of length 1.
-parser_e_dlltool_unit_var_problem=03160_E_Não foi possível gerar 1 DEFFILE para as variáveis globais da "unit"
-parser_e_dlltool_unit_var_problem2=03161_E_Compile sem a opção -WD
-% You need to compile this file without the -WD switch on the
-% commandline
-parser_f_need_objfpc_or_delphi_mode=03162_F_Voce precisa de ObjFpc (-S2) ou Delphi (-Sd) mode para compilar este módulo
-% You need to use \{\$mode objfpc\} or \{\$mode delphi\} to compile this file.
-% Or use the equivalent commandline switches -S2 or -Sd.
-parser_e_no_export_with_index_for_target=03163_E_Não é possível exportar functions/procedures para este Sist.Op. $1
-% Exporting of functions or procedures with a specified index is not
-% supported on this target.
-parser_e_no_export_of_variables_for_target=03164_E_Exportação de variáveis não é permitida no Sist.Op. $1
-% Exporting of variables is not supported on this target.
-parser_e_improper_guid_syntax=03165_E_Sintaxe de declaração GUID inválida
-parser_w_interface_mapping_notfound=03168_W_Procedure/function "$1" não encontrada em contexto aplicável para implementar $2.$3
-parser_e_interface_id_expected=03169_E_Esperado identificador de interface
-% This happens when the compiler scans a \var{class} declaration that contains
-% \var{interface} function name mapping code like this:
-% \begin{verbatim}
-% type
-%   TMyObject = class(TObject, IDispatch)
-%     function IUnknown.QueryInterface=MyQueryInterface;
-%     ....
-% \end{verbatim}
-% and the \var{interface} before the dot not listed in the inheritance list.
-parser_e_type_cant_be_used_in_array_index=03170_E_Tipo "$1" não pode ser usado como "array index type"
-% Types like \var{qword} or \var{int64} aren't allowed as array index type
-parser_e_no_con_des_in_interfaces=03171_E_Constructors/destructors não são permitidos em interfaces
-% Constructor and destructor declarations aren't allowed in interface
-% In the most cases the method \var{QueryInterface} of \var{IUnknown} can
-% be used to create a new interface.
-parser_e_no_access_specifier_in_interfaces=03172_E_Especificacoes de visibilidade não podem ser usadas em INTERFACES
-% The access specifiers \var{public}, \var{private}, \var{protected} and
-% \var{pusblished} can't be used in interfaces because all methods
-% of an interfaces must be public.
-parser_e_no_vars_in_interfaces=03173_E_Interfaces não podem conter definições de campos
-% Declarations of fields aren't allowed in interfaces. An interface
-% can contain only methods
-parser_e_no_local_proc_external=03174_E_Não é permitido declarar procedures locais como EXTERNAL
-% Declaring local procedures as external is not possible. Local procedures
-% get hidden parameters that will make the chance of errors very high
-parser_w_skipped_fields_before=03175_W_Alguns campos antes de "$1" não foram inicializados
-% In Delphi mode, not all fields of a typed constant record have to be
-% initialized, but the compiler warns you when it detects such situations.
-parser_e_skipped_fields_before=03176_E_Alguns campos antes de "$1" não foram inicializados
-% In all syntax modes but Delphi mode, you can't leave some fields uninitialized
-% in the middle of a typed constant record
-parser_w_skipped_fields_after=03177_W_Alguns campos após "$1" não foram inicializados
-% You can leave some fields at the end of a type constant record uninitialized
-% (the compiler will initialize them to zero automatically). This may be the cause
-% of subtle problems.
-parser_e_varargs_need_cdecl_and_external=03178_E_A diretiva VarArgs usada em procedure/function não CDecl nem External
-% The varargs directive can only be used with procedures or functions
-% that are declared with \var{cdecl} and \var{external} directives. The varargs directive
-% is only meant to provide a compatible interface to C functions like printf.
-parser_e_self_call_by_value=03179_E_Self deve ser 1 parâmetro recebido p/valor(não pode ser uma variável/constante)
-% You can't declare self as a const or var parameter, it must always be
-% a call-by-value parameter
-parser_e_interface_has_no_guid=03180_E_Interface "$1" precisa ter 1 identificação GUID
-% When you want to assign an interface to a constant, then the interface
-% must have a GUID value set.
-parser_e_illegal_field_or_method=03181_E_Campo de classe ou nome de método desconhecido "$1"
-% Properties must refer to a field or method in the same class.
-parser_w_proc_overriding_calling=03182_W_"Calling convention" "$2" substituirá a "$1"
-% There are two directives in the procedure declaration that specify a calling
-% convention. Only the last directive will be used
-parser_e_no_procvarobj_const=03183_E_"Typed" constantes do tipo "procedure of object" só podem ser inicializadas com NIL
-% You can't assign the address of a method to a typed constant which has a
-% 'procedure of object' type, because such a constant requires two addresses:
-% that of the method (which is known at compile time) and that of the object or
-% class instance it operates on (which can not be known at compile time).
-parser_e_default_value_only_one_para=03184_E_Valor default só pode ser atribuido a 1 parametro
-parser_e_default_value_expected_for_para=03185_E_Parâmetro default requerido para "$1"
-parser_w_unsupported_feature=03186_W_Use de feature não suportada
-% You're trying to force the compiler into doing something it cannot do yet.
-parser_h_c_arrays_are_references=03187_H_Parametros passados a functions/procedures em C devem ser passados por referência(pointer)
-% Any array passed to a C functions is passed
-% by a pointer (i.e. by reference).
-parser_e_C_array_of_const_must_be_last=03188_E_Array de constantes deve ser o último argumento de uma chamada do C
-% You can not add any other argument after an \var{array of const} for
-% \var{cdecl} functions, as the size pushed on stack for this argument is
-% not known.
-parser_h_type_redef=03189_H_O "type" "$1" já foi criado, tentativa de redefinição
-% This is an indicator that a previously declared type is
-% being redefined as something else. This may, or may not
-% be, a cause for errors.
-parser_w_cdecl_has_no_high=03190_W_Functions/procedures declaradas CDECL não suportam funções built in do compilador FPC
-% Functions declared with cdecl modifier do not pass an extra implicit parameter.
-parser_w_cdecl_no_openstring=03191_W_Functions/procedures declaradas CDECL devem ser chamadas com string de tamanho igual ao declarado no cabecalho da Function/procedure
-% Openstring is not supported for cdecl'ared functions.
-parser_e_initialized_not_for_threadvar=03192_E_Variáveis "threadvar" não podem ser inicializadas
-% Variables declared as threadvar can not be initialized with a default value.
-% The variables will always be filled with zero at the start of a new thread.
-parser_e_msg_only_for_classes=03193_E_A diretiva MESSAGE só é permitida em Classes
-% The message directive is only supported for Class types.
-parser_e_procedure_or_function_expected=03194_E_Procedure/Function esperada
-% A class method can only be specified for procedures and functions.
-parser_e_illegal_calling_convention=03195_W_Diretiva de "calling convention" ignorada: "$1"
-% Some calling conventions are supported only by certain CPUs. I.e. most non-i386 ports support
-% only the standard ABI calling convention of the CPU.
-parser_e_no_object_reintroduce=03196_E_REINTRODUCE não pode ser usado em objetos
-% \var{reintroduce} is not supported for objects.
-parser_e_paraloc_only_one_para=03197_E_Cada argumento tem sua devida posição
-% If locations for arguments are specified explicitly as it is required by
-% some syscall conventions, each argument must have it's only location, things
-% like \var{procedure p(i,j : longint 'r1');} aren't allowed
-parser_e_paraloc_all_paras=03198_E_Cada argumento tem sua posição específica
-% If one argument has an explicit argument location, all arguments of a procedure
-% must have one.
-parser_e_illegal_explicit_paraloc=03199_E_Posicao do argumento desconhecida
-% The location specified for an argument isn't recognized by the compiler
-parser_e_32bitint_or_pointer_variable_expected=03200_E_Esperado um inteiro de 32 bits ou uma pointer
-% The libbase for MorphOS/AmigaOS can be give only as \var{longint}, \var{dword} or any pointer variable.
-parser_e_goto_outside_proc=03201_E_Comando GOTO não pode desviar para label fora da procedure/function
-% It isn't allowed to use the \var{goto} statements referencing labels outside the
-% current procedure. The following example shows the problem:
-% \begin{verbatim}
-% ...
-%   procedure p1;
-%   label
-%     l1;
-%
-%     procedure p2;
-%     begin
-%       goto l1; // This goto ISN'T allowed
-%     end;
-%
-%   begin
-%     p2
-%   l1:
-%   end;
-% ...
-%
-% \end{verbatim}
-parser_f_too_complex_proc=03202_F_Procedure muito complexa, ela requer registradores demais
-% Your procedure body is too long for the compiler. You should split the
-% procedure into multiple smaller procedures.
-parser_e_illegal_expression=03203_E_Expressão inválida
-% This can occur under many circumstances. Mostly when trying to evaluate
-% constant expressions.
-parser_e_invalid_integer=03204_E_Resultado da expressão não é "integer"
-% You made an expression which isn't an integer, and the compiler expects the
-% result to be an integer.
-parser_e_invalid_qualifier=03205_E_Qualificador inválido
-% One of the following is happening :
-% \begin{itemize}
-% \item You're trying to access a field of a variable that is not a record.
-% \item You're indexing a variable that is not an array.
-% \item You're dereferencing a variable that is not a pointer.
-% \end{itemize}
-parser_e_upper_lower_than_lower=03206_E_Limite superior < limite inferior
-% You are declaring a subrange, and the lower limit is higher than the high
-% limit of the range.
-parser_e_macpas_exit_wrong_param=03207_E_O parâmetro do Exit deve ser o nome da procedure onde ele é usado
-% Non local exit is not allowed. This error occurs only in mode MacPas.
-parser_e_illegal_assignment_to_count_var=03208_E_Assinalamento inválido para a variável de controle do loop "for" "$1"
-% The type of a \var{for} loop variable must be an ordinal type.
-% Loop variables cannot be reals or strings.
-parser_e_no_local_var_external=03209_E_Variáveis locais não podem ser declaradas EXTERNAL
-% Declaring local variables as external is not allowed. Only global variables can reference
-% to external variables.
-parser_e_proc_already_external=03210_E_Procedure já foi declarada EXTERNAL
-% The procedure is already declared with the EXTERNAL directive in an interface or
-% forward declaration.
-parser_w_implicit_uses_of_variants_unit=03211_W_Assumido uso de Variants unit
-% The Variant type is used in the unit without any used unit using the Variants unit. The
-% compiler has implicitly added the Variants unit to the uses list. To remove this warning
-% the Variants unit needs to be added to the uses statement.
-parser_e_no_static_method_in_interfaces=03212_E_Classes e métodos static não podem ser usados em INTERFACES
-% The specifier \var{class} and directive \var{static} can't be used in interfaces
-% because all methods of an interfaces must be public.
-parser_e_arithmetic_operation_overflow=03213_E_Overflow em operação aritmética
-% An operation on two integers values produced an overflow
-parser_e_protected_or_private_expected=03214_E_Protected ou private esperados
-% \var{strict} can be only used together with \var{protected} or \var{private}.
-parser_e_illegal_slice=03215_E_SLICE não pode ser usado fora de uma lista de parâmetros
-% \var{slice} can be used only for arguments accepting an open array parameter
-parser_e_dispinterface_cant_have_parent=03216_E_Uma DISPINTERFACE não pode ter classe pai
-% A DISPINMTERFACE is a special type of interface which can't have a parent class
-parser_e_dispinterface_needs_a_guid=03217_E_Uma DISPINTERFACE precisa de uma identificação
-% A DISPINMTERFACE always needs an interface identification
-parser_w_overridden_methods_not_same_ret=03218_W_Metodos que fazem override em outros devem ter tipos de retorno relacionados ("$2" sofre override de "$1" que tem outro tipo de retorno))
-% If you declare overridden methods in a class definition, they must
-% have the same return type. Some versions of Delphi allow you to change the
-% return type of interface methods, and even to change procedures into
-% functions, but the resulting code may crash depending on the types used
-% and the way the methods are called.
-parser_e_dispid_must_be_ord_const=03219_E_Identificadores de prioridade de seleção devem ser constantes ordinais
-% \end{description}
-#
-# Type Checking
-#
-# 04049 is the last used one
-#
-% \section{Type checking errors}
-% This section lists all errors that can occur when type checking is
-% performed.
-% \begin{description}
-type_e_mismatch=04000_E_Type não combina
-% This can happen in many cases:
-% \begin{itemize}
-% \item The variable you're assigning to is of a different type than the
-% expression in the assignment.
-% \item You are calling a function or procedure with parameters that are
-% incompatible with the parameters in the function or procedure definition.
-% \end{itemize}
-type_e_incompatible_types=04001_E_Tipos de dado incompatíveis. Encontrado "$1" esperado "$2"
-% There is no conversion possible between the two types
-% Another possiblity is that they are declared in different
-% declarations:
-% \begin{verbatim}
-% Var
-%    A1 : Array[1..10] Of Integer;
-%    A2 : Array[1..10] Of Integer;
-%
-% Begin
-%    A1:=A2; { This statement gives also this error, it
-%              is due the strict type checking of pascal }
-% End.
-% \end{verbatim}
-type_e_not_equal_types=04002_E_Tipos de "$1" e "$2" não combinam
-% The types are not equal
-type_e_type_id_expected=04003_E_Identificador de tipo(type) esperado
-% The identifier is not a type, or you forgot to supply a type identifier.
-type_e_variable_id_expected=04004_E_Esperada uma variável
-% This happens when you pass a constant to a routine (such as \var{Inc} var or \var{Dec})
-% when it expects a variable. You can only pass variables as arguments to these functions.
-type_e_integer_expr_expected=04005_E_Esperada expressão do tipo "integer", mas encontrada "$1"
-% The compiler expects an expression of type integer, but gets a different
-% type.
-type_e_boolean_expr_expected=04006_E_Esperada expressão do tipo "boolean", mas encontrada "$1"
-% The expression must be a boolean type, it should be return true or
-% false.
-type_e_ordinal_expr_expected=04007_E_Esperada expressão do tipo "ordinal"
-% The expression must be of ordinal type, i.e., maximum a \var{Longint}.
-% This happens, for instance, when you specify a second argument
-% to \var{Inc} or \var{Dec} that doesn't evaluate to an ordinal value.
-type_e_pointer_type_expected=04008_E_Esperado tipo pointer, mas encontrado "$1"
-% The variable or expression isn't of the type \var{pointer}. This
-% happens when you pass a variable that isn't a pointer to \var{New}
-% or \var{Dispose}.
-type_e_class_type_expected=04009_E_Esperada uma classe, mas encontrado "$1"
-% The variable of expression isn't of the type \var{class}. This happens
-% typically when
-% \begin{enumerate}
-% \item The parent class in a class declaration isn't a class.
-% \item An exception handler (\var{On}) contains a type identifier that
-% isn't a class.
-% \end{enumerate}
-type_e_cant_eval_constant_expr=04011_E_Não pude resolver a expressão
-% This error can occur when the bounds of an array you declared does
-% not evaluate to ordinal constants
-type_e_set_element_are_not_comp=04012_E_Os elementos dos "sets" são incompatíveis
-% You are trying to make an operation on two sets, when the set element types
-% are not the same. The base type of a set must be the same when taking the
-% union
-type_e_set_operation_unknown=04013_E_Operação não implementada para "sets"
-% several binary operations are not defined for sets
-% like div mod ** (also >= <= for now)
-type_w_convert_real_2_comp=04014_W_Conversão automática de floating type para COMP o qual é do tipo "integer"
-% An implicit type conversion from a real type to a \var{comp} is
-% encountered. Since \var{comp} is a 64 bit integer type, this may indicate
-% an error.
-type_h_use_div_for_int=04015_H_Use o operador DIV para obter um resultado "integer"
-% When hints are on, then an integer division with the '/' operator will
-% procuce this message, because the result will then be of type real
-type_e_strict_var_string_violation=04016_E_String types não combinam, por causa da diretiva $V+
-% When compiling in \var{\{\$V+\}} mode, the string you pass as a parameter
-% should be of the exact same type as the declared parameter of the procedure.
-type_e_succ_and_pred_enums_with_assign_not_possible=04017_E_Succ ou Pred em tipos "enumerated" que contenham atribuições não é possível
-% When you declared an enumeration type which has assignments in it, as in C,
-% like in the following:
-% \begin{verbatim}
-%   Tenum = (a,b,e:=5);
-% \end{verbatim}
-% you cannot use the \var{Succ} or \var{Pred} functions on them.
-type_e_cant_read_write_type=04018_E_Não é possível ler ou gravar variáveis deste "type"
-% You are trying to \var{read} or \var{write} a variable from or to a
-% file of type text, which doesn't support that. Only integer types,
-% reals, pchars and strings can be read from/written to a text file.
-% Booleans can only be written to text files.
-type_e_no_readln_writeln_for_typed_file=04019_E_Não pode usar readln ou writeln em arquivo "typed"
-% \var{readln} and \var{writeln} are only allowed for text files.
-type_e_no_read_write_for_untyped_file=04020_E_Não pode usar read ou write em arquivo "untyped"
-% \var{read} and \var{write} are only allowed for text or typed files.
-type_e_typeconflict_in_set=04021_E_Conflito de tipo entre 1 ou mais elementos e o tipo de dados do SET
-% There is at least one set element which is of the wrong type, i.e. not of
-% the set type.
-type_w_maybe_wrong_hi_lo=04022_W_lo/hi(dword/qword) retorna upper/lower nos formatos word/dword
-% \fpc supports an overloaded version of \var{lo/hi} for \var{longint/dword/int64/qword}
-% which returns the lower/upper word/dword of the argument. TP always uses
-% a 16 bit \var{lo/hi} which returns always bits 0..7 for \var{lo} and the
-% bits 8..15 for \var{hi}. If you want the TP behavior you have
-% to type cast the argument to \var{word/integer}
-type_e_integer_or_real_expr_expected=04023_E_Esperada expressão "integer" ou "real"
-% The first argument to \var{str} must a real or integer type.
-type_e_wrong_type_in_array_constructor=04024_E_Tipo "$1" inválido em "array constructor"
-% You are trying to use a type in an array constructor which is not
-% allowed.
-type_e_wrong_parameter_type=04025_E_Tipo incompatível para o arg no. $1: Recebido "$2", esperado "$3"
-% You are trying to pass an invalid type for the specified parameter.
-type_e_no_method_and_procedure_not_compatible=04026_E_Variáveis do tipo "procedure of object" não são compatíveis com variáveis do tipo "procedure"
-% You can't assign a method to a procedure variable or a procedure to a
-% method pointer.
-type_e_wrong_math_argument=04027_E_Constante inválida passada para função matemática
-% The constant argument passed to a ln or sqrt function is out of
-% the definition range of these functions.
-type_e_no_addr_of_constant=04028_E_Não é possível obter endereço de constantes
-% It is not possible to get the address of a constant, because they
-% aren't stored in memory, you can try making it a typed constant.
-type_e_argument_cant_be_assigned=04029_E_Não se pode atribuir dados a este argumento
-% Only expressions which can be on the left side of an
-% assignment can be passed as call by reference argument
-% Remark: Properties can be only
-% used on the left side of an assignment, but they cannot be used as arguments
-type_e_cannot_local_proc_to_procvar=04030_E_Não pode atribuir procedure/function local a uma variável do tipo "procedure"
-% It's not allowed to assign a local procedure/function to a
-% procedure variable, because the calling of local procedure/function is
-% different. You can only assign local procedure/function to a void pointer.
-type_e_no_assign_to_addr=04031_E_Não pode atribuir valores a um endereço
-% It is not allowed to assign a value to an address of a variable,constant,
-% procedure or function. You can try compiling with -So if the identifier
-% is a procedure variable.
-type_e_no_assign_to_const=04032_E_Não pode atribuir valores a uma variável declarada como "const"
-% It's not allowed to assign a value to a variable which is declared
-% as a const. This is normally a parameter declared as const, to allow
-% changing the value make the parameter as a value parameter or a var.
-type_e_array_required=04033_E_Requerido tipo array
-% If you are accessing a variable using an index '[<x>]' then
-% the type must be an array. In FPC mode also a pointer is allowed.
-type_e_interface_type_expected=04034_E_Esperado tipo "interface" mas encontrado "$1"
-type_w_mixed_signed_unsigned=04035_W_Misturar expressões com sinal e "longword" gera resultado de 64 bits
-% If you divide (or calculate the modulus of) a signed expression by a longword (or vice versa),
-% or if you have overflow and/or range checking turned on and use an arithmetic
-% expression (+, -, *, div, mod) in which both signed numbers and longwords appear,
-% then everything has to be evaluated in 64bit which is slower than normal
-% 32bit arithmetic. You can avoid this by typecasting one operand so it
-% matches the result type of the other one.
-type_w_mixed_signed_unsigned2=04036_W_Misturar expressões com sinal e "cardinals" neste ponto pode causar "range check error"
-% If you use a binary operator (and, or, xor) and one of
-% the operands is a longword while the other one is a signed expression, then,
-% if range checking is turned on, you may get a range check error because in
-% such a case both operands are converted to longword before the operation is
-% carried out. You can avoid this by typecasting one operand so it
-% matches the result type of the other one.
-type_e_typecast_wrong_size_for_assignment=04037_E_Variável que sofreu typecast ficou com tamanho diferente ($1 -> $2)
-% Type casting to a type with a different size is not allowed when the variable is
-% used for assigning.
-type_e_array_index_enums_with_assign_not_possible=04038_E_Membro de "enumerated" que contenha atribuições, não pode ser usado como índice de array
-% When you declared an enumeration type which has assignments in it, as in C,
-% like in the following:
-% \begin{verbatim}
-%   Tenum = (a,b,e:=5);
-% \end{verbatim}
-% you cannot use it as index of an array.
-type_e_classes_not_related=04039_E_Classes ou "objects" de tipos "$1" and "$2" não estão relacionados(os tipos)
-% There is a typecast from one class or object to another while the class/object
-% are not related. This will probably lead to errors
-type_w_classes_not_related=04040_W_Classes "types" "$1" e "$2" não estão relacionados
-% There is a typecast from one class or object to another while the class/object
-% are not related. This will probably lead to errors
-type_e_class_or_interface_type_expected=04041_E_Esperada uma classe ou um interface mas encontrado "$1"
-type_e_type_is_not_completly_defined=04042_E_O "type" "$1" não está completamente definido
-type_w_string_too_long=04043_W_Literal tem mais caracteres que o tamanho de "short string"
-% The size of the constant string, which is assigned to a shortstring,
-% is longer than the maximum size of the shortstring
-type_w_signed_unsigned_always_false=04044_W_Comparação será sempre falsa devido ao "range" de valores
-% There is a comparison between an unsigned value and a signed constant which is
-% less than zero. Because of type promotion, the statement will always evaluate to
-% false. Exlicitly typecast the constant to the correct range to avoid this problem.
-type_w_signed_unsigned_always_true=04045_W_Comparação será sempre verdadeira devido ao "range" de valores
-% There is a comparison between an unsigned value and a signed constant which is
-% less than zero. Because of type promotion, the statement will always evaluate to
-% true. Exlicitly typecast the constant to the correct range to avoid this problem.
-type_w_instance_with_abstract=04046_W_Construindo classe "$1" mas superclasse tem métodos virtuais que não sofreram override
-% An instance of a class is created which contains non-implemented abstract
-% methods. This will probably lead to a runtime error 211 in the code if that
-% routine is ever called. All abstract methods should be overriden.
-type_h_in_range_check=04047_H_Operando a esquerada de um operador IN tem que ter tamanho de 1 byte
-% The left operand of the \var{in} operator is not an ordinal or enumeration which fits
-% within 8-bits, this may lead to range check errors. The \var{in} operator
-% currently only supports a left operand which fits within a byte. In the case of
-% enumerations, the size of an element of an enumeration can be controlled with
-% the \var{\{\$PACKENUM\}} or \var{\{\$Zn\}} switches.
-type_w_smaller_possible_range_check=04048_W_"Types" de tamanho diferente, haverá possível perda de dados e/ou "range check error"
-% There is an assignment to a smaller type than the source type. This means that
-% this may cause a range-check error, or may lead to possible loss of data.
-type_h_smaller_possible_range_check=04049_H_Tamanho dos types não combina, possível perda de dados ou erro de "range"
-% There is an assignment to a smaller type than the source type. This means that
-% this may cause a range-check error, or may lead to possible loss of data.
-type_e_cant_take_address_of_abstract_method=04050_E_Não foi possível obter o endereço de 1 método abstrato
-% An abstract method has no body, so the address of an abstract method can't be taken.
-type_e_operator_not_allowed=04051_E_O operador não se aplica ao tipo de operando
-% You are trying an operator that is not available for the type of the
-% operands
-type_e_constant_expr_expected=04052_E_Esperada expressão do tipo constante
-% The compiler expects an constant expression, but gets a variable expression.
-type_e_operator_not_supported_for_types=04053_E_Operação "$1" não permitida para os tipos "$2" and "$3"
-% The operation is not allowed for the supplied types
-type_e_illegal_type_conversion=04054_E_Conversão ilegal de tipos: "$1" para "$2"
-% When doing a type-cast, you must take care that the sizes of the variable and
-% the destination type are the same.
-type_h_pointer_to_longint_conv_not_portable=04055_H_Conversão entre "ordinals" e "pointer" não é portável
-% If you typecast a pointer to a longint (or vice-versa), this code will not compile
-% on a machine using 64-bit for pointer storage.
-type_w_pointer_to_longint_conv_not_portable=04056_W_Conversão entre "ordinals" e "pointer" não é portável
-% If you typecast a pointer to a ordinal type of a different size (or vice-versa), this can
-% cause problems. This is a warning to help finding the 32bit specific code where cardinal/longint is used
-% to typecast pointers to ordinals. A solution is to use the ptrint/ptruint types instead.
-type_e_cant_choose_overload_function=04057_E_Não foi possível determinar qual das functions que sofreram overload deve ser chamada
-% You're calling overloaded functions with a parameter that doesn't correspond
-% to any of the declared function parameter lists. e.g. when you have declared
-% a function with parameters \var{word} and \var{longint}, and then you call
-% it with a parameter which is of type \var{integer}.
-type_e_illegal_count_var=04058_E_Variável usada como contador é de tipo inválido
-% The type of a \var{for} loop variable must be an ordinal type.
-% Loop variables cannot be reals or strings.
-type_w_double_c_varargs=04059_W_Convertendo constante tipo real p/tipo double p/ser usada como variável de C, adicione typecast explícito p/evitar isto
-% In C, constant real values are double by default. For this reason, if you
-% pass a constant real value to a variable argument part of a C function, FPC
-% by default converts this constant to double as well. If you want to prevent
-% this from happening, add an explicit typecast around the constant.
-type_e_class_or_cominterface_type_expected=04060_E_Esperada classe ou interface tipo COM, mas encontrado "$1"
-% Some operators like the AS operator are only appliable to classes or COM interfaces.
-% \end{description}
-#
-# Symtable
-#
-# 05055 is the last used one
-#
-% \section{Symbol handling}
-% This section lists all the messages that concern the handling of symbols.
-% This means all things that have to do with procedure and variable names.
-% \begin{description}
-sym_e_id_not_found=05000_E_Identificador não encontrado "$1"
-% The compiler doesn't know this symbol. Usually happens when you misspel
-% the name of a variable or procedure, or when you forgot to declare a
-% variable.
-sym_f_internal_error_in_symtablestack=05001_F_Erro interno no SymTableStack()
-% An internal error occurred in the compiler; If you encounter such an error,
-% please contact the developers and try to provide an exact description of
-% the circumstances in which the error occurs.
-sym_e_duplicate_id=05002_E_Identificador duplicado "$1"
-% The identifier was already declared in the current scope.
-sym_h_duplicate_id_where=05003_H_Identificador já definido em $1 na linha $2
-% The identifier was already declared in a previous scope.
-sym_e_unknown_id=05004_E_Identificador desconhecido "$1"
-% The identifier encountered has not been declared, or is used outside the
-% scope where it is defined.
-sym_e_forward_not_resolved=05005_E_Declaração "forward" não resolvida "$1"
-% This can happen in two cases:
-% \begin{itemize}
-% \item This happens when you declare a function (in the \var{interface} part, or
-% with a \var{forward} directive, but do not implement it.
-% \item You reference a type which isn't declared in the current \var{type}
-% block.
-% \end{itemize}
-sym_e_error_in_type_def=05007_E_Erro na definição de um "type"
-% There is an error in your definition of a new array type:
-% \item One of the range delimiters in an array declaration is erroneous.
-% For example, \var{Array [1..1.25]} will trigger this error.
-sym_e_forward_type_not_resolved=05009_E_"Forward type" "$1" não resolvido
-% A symbol was forward defined, but no declaration was encountered.
-sym_e_only_static_in_static=05010_E_Apenas variáveis "static" podem ser usadas em metodos "static" ou metodos externos ao bloco
-% A static method of an object can only access static variables.
-sym_f_type_must_be_rec_or_class=05012_F_Esperado um record ou uma classe
-% The variable or expression isn't of the type \var{record} or \var{class}.
-sym_e_no_instance_of_abstract_object=05013_E_Não é permitido instanciar classes ou objetos através de métodos abstratos
-% You are trying to generate an instance of a class which has an abstract
-% method that wasn't overridden.
-sym_w_label_not_defined=05014_W_"Label" não definido "$1"
-% A label was declared, but not defined.
-sym_e_label_used_and_not_defined=05015_E_"Label" usado mas não definido "$1"
-% A label was declared and used, but not defined.
-sym_e_ill_label_decl=05016_E_Declaração de label inválida
-% This error should never happen; it occurs if a label is defined outside a
-% procedure or function.
-sym_e_goto_and_label_not_supported=05017_E_GOTO e LABEL não suportados (use a diretiva -Sg)
-% You must compile a program which has \var{label}s and \var{goto} statements
-% with the \var{-Sg} switch. By default, \var{label} and \var{goto} aren't
-% supported.
-sym_e_label_not_found=05018_E_Label não encontrado
-% A \var{goto label} was encountered, but the label isn't declared.
-sym_e_id_is_no_label_id=05019_E_Identificador não é um label
-% The identifier specified after the \var{goto} isn't of type label.
-sym_e_label_already_defined=05020_E_Lable já definido
-% You are defining a label twice. You can define a label only once.
-sym_e_ill_type_decl_set=05021_E_Type inválido na declaração dos elementos de um set
-% The declaration of a set contains an invalid type definition.
-sym_e_class_forward_not_resolved=05022_E_Definição da classe citada num "forward" não resolvida "$1"
-% You declared a class, but you did not implement it.
-sym_n_unit_not_used=05023_H_"Unit" "$1" não usada em $2
-% The unit referenced in the \var{uses} clause is not used.
-sym_h_para_identifier_not_used=05024_H_Identificador "$1" não usado
-% The identifier was declared (locally or globally) but
-% was not used (locally or globally).
-sym_n_local_identifier_not_used=05025_N_Variável local "$1" não usada
-% You have declared, but not used a variable in a procedure or function
-% implementation.
-sym_h_para_identifier_only_set=05026_H_Identificador "$1" declarado com valor mas nunca usado
-% The identifier was declared (locally or globally)
-% set but not used (locally or globally).
-sym_n_local_identifier_only_set=05027_N_Variável local "$1" é declarada/inicializada mas nunca usada
-% The variable in a procedure or function
-% implementation is declared, set but never used.
-sym_h_local_symbol_not_used=05028_H_Símbolo local $1 "$2" não é usado
-% A local symbol is never used.
-sym_n_private_identifier_not_used=05029_N_Campo "private" "$1.$2" nunca é usado
-sym_n_private_identifier_only_set=05030_N_Campo "private" "$1.$2" é inicializado mas nunca usado
-sym_n_private_method_not_used=05031_N_Metodo "private" "$1.$2" nunca usado
-sym_e_set_expected=05032_E_Esperado tipo "set"
-% The variable or expression is not of type \var{set}. This happens in an
-% \var{in} statement.
-sym_w_function_result_not_set=05033_W_Resultado de uma function parece não ter sido atribuído
-% You can get this warning if the compiler thinks that a function return
-% value is not set. This will not be displayed for assembler procedures,
-% or procedures that contain assembler blocks.
-sym_w_wrong_C_pack=05034_W_Type "$1" parece não estar alinhado corretamente no registro corrente para em estruturas C
-% Arrays with sizes not multiples of 4 will be wrongly aligned
-% for C structures.
-sym_e_illegal_field=05035_E_Campo de "record" desconhecido "$1"
-% The field doesn't exist in the record/object definition.
-sym_w_uninitialized_local_variable=05036_W_Variável local "$1" parece não ter sido inicializada
-% This message is displayed if the compiler thinks that a variable will
-% be used (i.e. appears in the right-hand-side of an expression) when it
-% was not initialized first (i.e. appeared in the left-hand side of an
-% assigment)
-sym_w_uninitialized_variable=05037_W_Variavel "$1" não parece ter sido inicializada
-% This message is displayed if the compiler thinks that a variable will
-% be used (i.e. appears in the right-hand-side of an expression) when it
-% was not initialized first (i.e. appeared in the left-hand side of an
-% assigment)
-sym_e_id_no_member=05038_E_Identificador não identifica nenhum dado ou método "$1"
-% This error is generated when an identifier of a record,
-% field, or method is accessed while it is not defined.
-sym_h_param_list=05039_H_Declaração encontrada mas procedure que sofre o overload não: $1
-% You get this when you use the \var{-vh} switch. In case an overloaded
-% procedure is not found, then all candidate overloaded procedures are
-% listed, with their parameter lists.
-sym_e_segment_too_large=05040_E_Elemento de dados muito grande
-% You get this when you declare a data element whose size exceeds the
-% prescribed limit (2 Gb on 80386+/68020+ processors)
-sym_e_no_matching_implementation_found=05042_E_Não encontrada implementação de metodo para a interface "$1"
-% There was no matching method found which could implement the interface
-% method. Check argument types and result type of the methods.
-sym_w_deprecated_symbol=05043_W_Symbol "$1" está obsoleto(a)
-% This means that a symbol (a variable, routine, etc...) which is
-% declared as \var{deprecated} is used. Deprecated symbols may no longer
-% be available in newer versions of the unit / library. Usage of this symbol
-% should be avoided as much as possible.
-sym_w_non_portable_symbol=05044_W_Símbolo "$1" não é portavel
-% This means that a symbol (a variable, routine, etc...) which is
-% declared as \var{platform} is used. This symbol's value, usage
-% and availability is platform specific and should not be used
-% if the source code must be portable.
-sym_w_non_implemented_symbol=05055_W_Símbolo "$1" não está implementado
-% This means that a symbol (a variable, routine, etc...) which is
-% declared as \var{unimplemented} is used. This symbol is defined,
-% but is not yet implemented on this specific platform.
-sym_e_cant_create_unique_type=05056_E_Não é possível criar 1 "type" que seja único a partir deste "type"
-% Only simple types like ordinal, float and string types are supported when
-% redefining a type with \var{type newtype = type oldtype;}.
-sym_h_uninitialized_local_variable=05057_H_Variável local "$1" não parece ter sido inicializada
-% This message is displayed if the compiler thinks that a variable will
-% be used (i.e. appears in the right-hand-side of an expression) when it
-% was not initialized first (i.e. appeared in the left-hand side of an
-% assigment)
-sym_h_uninitialized_variable=05058_H_Variável "$1" não parece ter sido inicializada
-% This message is displayed if the compiler thinks that a variable will
-% be used (i.e. appears in the right-hand-side of an expression) when it
-% was not initialized first (i.e. appeared in the left-hand side of an
-% assigment)
-sym_w_function_result_uninitialized=05059_W_Variável resultado de uma function não parece estar sendo inicializada
-% This message is displayed if the compiler thinks that the function result
-% variable will be used (i.e. appears in the right-hand-side of an expression)
-% before it is initialized (i.e. appeared in the left-hand side of an
-% assigment)
-sym_h_function_result_uninitialized=05060_H_Variável resultado de uma function não parece estar sendo inicializada
-% This message is displayed if the compiler thinks that the function result
-% variable will be used (i.e. appears in the right-hand-side of an expression)
-% before it is initialized (i.e. appeared in the left-hand side of an
-% assigment)
-sym_w_identifier_only_read=05061_W_Variavel "$1" usada em um read mas não sofre assinalamento em lugar algum
-% You have read the value of a variable, but nowhere assigned a value to
-% it.
-
-% \end{description}
-#
-# Codegenerator
-#
-# 06040 is the last used one
-#
-% \section{Code generator messages}
-% This section lists all messages that can be displayed if the code
-% generator encounters an error condition.
-% \begin{description}
-cg_e_parasize_too_big=06009_E_Lista de parâmetros excede 65535 bytes
-% The I386 processor limits the parameter list to 65535 bytes (the \var{RET}
-% instruction causes this)
-cg_e_file_must_call_by_reference=06012_E_"File types" devem ser variáveis
-% You cannot specify files as value parameters, i.e. they must always be
-% declared \var{var} parameters.
-cg_e_cant_use_far_pointer_there=06013_E_O uso de pointer tipo "far" não é permitido
-% Free Pascal doesn't support far pointers, so you cannot take the address of
-% an expression which has a far reference as a result. The \var{mem} construct
-% has a far reference as a result, so the following code will produce this
-% error:
-% \begin{verbatim}
-% var p : pointer;
-% ...
-% p:=@mem[a000:000];
-% \end{verbatim}
-cg_e_dont_call_exported_direct=06015_E_Functions declaradas EXPORT não podem ser chamadas
-% No longer in use.
-cg_w_member_cd_call_from_method=06016_W_Possível chamada inválida a constructor ou destructor
-% The compiler detected that a constructor or destructor is called within a
-% a method. This will probably lead to problems, since constructors / destructors
-% require parameters on entry.
-cg_n_inefficient_code=06017_N_Código pouco eficiente
-% Your statement seems dubious to the compiler.
-cg_w_unreachable_code=06018_W_Código nunca será executado
-% You specified a construct which will never be executed. Example:
-% \begin{verbatim}
-% while false do
-%   begin
-%   {.. code ...}
-%   end;
-% \end{verbatim}
-cg_e_cant_call_abstract_method=06020_E_Métodos abstratos não podem ser chamadaos diretamente
-% You cannot call an abstract method directy, instead you must call a
-% overriding child method, because an abstract method isn't implemented.
-cg_d_register_weight=06027_DL_Registrador $1 tem prioridade sobre $2 $3
-% Debugging message. Shown when the compiler considers a variable for
-% keeping in the registers.
-cg_d_stackframe_omited=06029_DL_"Stack frame" omitido
-% Some procedure/functions do not need a complete stack-frame, so it is omitted.
-% This message will be displayed when the {-vd} switch is used.
-cg_e_unable_inline_object_methods=06031_E_Objetos ou métodos não podem ser inline.
-% You cannot have inlined object methods.
-cg_e_unable_inline_procvar=06032_E_Call a variáveis do tipo procedure não podem ser inline
-% A procedure with a procedural variable call cannot be inlined.
-cg_e_no_code_for_inline_stored=06033_E_Nenhum código foi carregado para a procedure inline
-% The compiler couldn't store code for the inline procedure.
-cg_e_can_access_element_zero=06035_E_O elemento zero de 1 ansi/wide- ou longstring não pode ser acessado, use SetLength
-% You should use \var{setlength} to set the length of an ansi/wide/longstring
-% and \var{length} to get the length of such a string types
-cg_e_cannot_call_cons_dest_inside_with=06037_E_Constructors ou destructors não podem ser chamados de dentro de 1 cláusula 'with'
-% Inside a \var{with} clause you cannot call a constructor or destructor for the
-% object you have in the \var{with} clause.
-cg_e_cannot_call_message_direct=06038_E_Não é possível acessar diretamente métodos do tipo "message handler"(declarados com diretiva message)
-% A message method handler method cannot be called directly if it contains an
-% explicit self argument
-cg_e_goto_inout_of_exception_block=06039_E_Pulo para dentro ou para fora de 1 "exception block"
-% It is not allowed to jump in or outside of an exception block like \var{try..finally..end;}:
-% \begin{verbatim}
-% label 1;
-%
-% ...
-%
-% try
-%    if not(final) then
-%      goto 1;   // this line will cause an error
-% finally
-%   ...
-% end;
-% 1:
-% ...
-% \end{verbatim}
-cg_e_control_flow_outside_finally=06040_E_Comandos de controle de fluxo de execução não são permitidos dentro de blocos "finally"
-% It isn't allowed to use the control flow statements \var{break},
-% \var{continue} and \var{exit}
-% inside a finally statement. The following example shows the problem:
-% \begin{verbatim}
-% ...
-%   try
-%      p;
-%   finally
-%      ...
-%      exit;  // This exit ISN'T allowed
-%   end;
-% ...
-%
-% \end{verbatim}
-% If the procedure \var{p} raises an exception the finally block is
-% executed. If the execution reaches the exit, it's unclear what to do:
-% exiting the procedure or searching for another exception handler
-cg_w_parasize_too_big=06041_W_Tamanho total dos parâmetros excede o limite de alguns processadores
-% This indicates that you are declaring more than 64K of parameters, which
-% might not be supported on other processor targets.
-cg_w_localsize_too_big=06042_W_O tamanho total das variáveis locais excede o limite de alguns processadores
-% This indicates that you are declaring more than 32K of local variables, which
-% might not be supported on other processor targets.
-cg_e_localsize_too_big=06043_E_O tamanho das variáveis locais excede o limite suportado
-% This indicates that you are declaring more than 32K of local variables, which
-% is not supported by this processor.
-cg_e_break_not_allowed=06044_E_BREAK não permitido neste ponto
-% You're trying to use \var{break} outside a loop construction.
-cg_e_continue_not_allowed=06045_E_CONTINUE não permitido neste ponto
-% You're trying to use \var{continue} outside a loop construction.
-cg_f_unknown_compilerproc=06046_F_Procedure de compilador "$1" inválida. Verifique se usou a library de run time correta
-% The compiler expects that the runtime library contains some subrountines. If you see this error
-% and you didn't mess with the runtime library, it's very likely that the runtime library
-% you're using doesn't match the used compiler. If you changed the runtime library this error means
-% that you removed a subroutine which the compiler needs for internal use.
-% \end{description}
-# EndOfTeX
-
-#
-# Assembler reader
-#
-# 07097 is the last used one
-#
-asmr_d_start_reading=07000_DL_Iniciando a montagem do bloco assembly $1
-% This informs you that an assembler block is being parsed
-asmr_d_finish_reading=07001_DL_Montagem do bloco assembly $1 finalizada
-% This informs you that an assembler block has finished.
-asmr_e_none_label_contain_at=07002_E_Encontrado o caracter @ em identificador que não é label
-% A identifier which isn't a label can't contain a @.
-asmr_e_building_record_offset=07004_E_Erro durante a apuração de um deslocamento(offset)
-% There has an error occured while building the offset of a record/object
-% structure, this can happend when there is no field specified at all or
-% an unknown field identifier is used.
-asmr_e_offset_without_identifier=07005_E_Deslocamento(OFFSET) usado sem um identificador
-% You can only use OFFSET with an identifier. Other syntaxes aren't
-% supported
-asmr_e_type_without_identifier=07006_E_"TYPE" usado sem identificador
-% You can only use TYPE with an identifier. Other syntaxes aren't
-% supported
-asmr_e_no_local_or_para_allowed=07007_E_Não pode usar variável local ou parâmetros aqui
-% You can't use a local variable or parameter here, mostly because the
-% addressing of locals and parameters is done using the frame pointer register so the
-% address can't be obtained directly.
-asmr_e_need_offset=07008_E_É necessário o uso do operador OFFSET aqui
-% You need to use OFFSET <id> here to get the address of the identifier.
-asmr_e_need_dollar=07009_E_Precisa usar $ aqui
-% You need to use $<id> here to get the address of the identifier.
-asmr_e_cant_have_multiple_relocatable_symbols=07010_E_Não pode usar múltiplos símbolos relocáveis
-% You can't have more than one relocatable symbol (variable/typed constant)
-% in one argument.
-asmr_e_only_add_relocatable_symbol=07011_E_Simbolo relocável só pode ser usado para adição
-% Relocatable symbols (variable/typed constant) can't be used with other
-% operators. Only addition is allowed.
-asmr_e_invalid_constant_expression=07012_E_Expressão constante inválida
-% There is an error in the constant expression.
-asmr_e_relocatable_symbol_not_allowed=07013_E_Símbolo relocável não permitido aqui
-% You can't use a relocatable symbol (variable/typed constant) here.
-asmr_e_invalid_reference_syntax=07014_E_Erro de sintaxe
-% There is an error in the reference.
-asmr_e_local_para_unreachable=07015_E_Nao permitido acionar $1 a partir deste código
-% You can not read directly the value of a local variable or parameter
-% of a higher level procedure in assembler code (except for
-% local assembler code without parameter nor locals).
-asmr_e_local_label_not_allowed_as_ref=07016_E_Símbolos e labels locais não são permitidos como referências
-% You can't use local symbols/labels as references
-asmr_e_wrong_base_index=07017_E_Uso inválido de registradores base e indexador
-% There is an error with the base and index register, they are
-% probably incorrect
-asmr_w_possible_object_field_bug=07018_W_Possível erro no manuseio de algum campo de objeto
-% Fields of objects or classes can be reached directly in normal or objfpc
-% modes but TP and Delphi modes treat the field name as a simple offset.
-asmr_e_wrong_scale_factor=07019_E_Especificado fator de escala errado
-% The scale factor given is wrong, only 1,2,4 and 8 are allowed
-asmr_e_multiple_index=07020_E_Uso de múltiplos registradores indexadores
-% You are trying to use more than one index register
-asmr_e_invalid_operand_type=07021_E_Tipo de operando inválido
-% The operand type doesn't match with the opcode used
-asmr_e_invalid_string_as_opcode_operand=07022_E_Opcode inválido: $1
-% The string specified as operand is not correct with this opcode
-asmr_w_CODE_and_DATA_not_supported=07023_W_@CODE e @DATA não suportados
-% @CODE and @DATA are unsupported and are ignored.
-asmr_e_null_label_ref_not_allowed=07024_E_Null label references não permitidas
-asmr_e_expr_zero_divide=07025_E_Divisão por zero no analisador do assembler
-% There is a division by zero in a constant expression
-asmr_e_expr_illegal=07026_E_Expressão ilegal
-% There is an illegal expression in a constant expression
-asmr_e_escape_seq_ignored=07027_E_Sequencia de escape ignorada: $1
-% There is a C-styled string, but the escape sequence in the string
-% is unknown, and is therefore ignored
-asmr_e_invalid_symbol_ref=07028_E_Referência a símbolo inválida
-asmr_w_fwait_emu_prob=07029_W_Fwait pode causar problemas de emulação com emu387
-asmr_w_fadd_to_faddp=07030_W_$1 sem operandos traduzida para $1P
-asmr_w_enter_not_supported_by_linux=07031_W_Instrução ENTER não é suportada pelo kernel do Linux
-% ENTER instruction can generate a stack page fault that is not
-% caught correctly by the i386 Linux page handler.
-asmr_w_calling_overload_func=07032_W_Chamada em assembly a 1 método que sofreu overload
-% There is a call to an overloaded method in the assembler block,
-% this might be the sign there is a problem
-asmr_e_unsupported_symbol_type=07033_E_Símbolo de "type" não suportado para operando
-asmr_e_constant_out_of_bounds=07034_E_Constante fora da faixa
-asmr_e_error_converting_decimal=07035_E_Erro convertendo decimal $1
-% A constant decimal value does not have the correct syntax
-asmr_e_error_converting_octal=07036_E_Erro convertendo octal $1
-% A constant octal value does not have the correct syntax
-asmr_e_error_converting_binary=07037_E_Erro convertendo binario $1
-% A constant binary value does not have the correct syntax
-asmr_e_error_converting_hexadecimal=07038_E_Error convertendo hexadecimal $1
-% A constant hexadecimal value does not have the correct syntax
-asmr_h_direct_global_to_mangled=07039_H_$1 traduzido para $2
-asmr_w_direct_global_is_overloaded_func=07040_W_$1 está associado a uma function que sofreu overload
-asmr_e_cannot_use_SELF_outside_a_method=07041_E_Não pode usar SELF fora de um método
-% There is a reference to the \var{self} symbol while it is not
-% allowed. \var{self} can only be referenced inside methods
-asmr_e_cannot_use_OLDEBP_outside_nested_procedure=07042_E_Não pode usar OLDEBP fora de uma procedure aninhada
-% There is a reference to the \var{oldebp} symbol while it is not
-% allowed. \var{oldebp} can only be referenced inside nested routines
-asmr_e_void_function=07043_W_Procedures não podem retornar nenhum valor no código assembly
-% Trying to return a value while in a procedure. A procedure
-% does not have any return value
-asmr_e_SEG_not_supported=07044_E_SEG não suportado
-asmr_e_size_suffix_and_dest_dont_match=07045_E_Sufixo de tamanho e o destino ou tamanho da origem não combinam
-% The register size and the opcode size suffix don't match. This is
-% probably an error in the assembler statement
-asmr_w_size_suffix_and_dest_dont_match=07046_W_Tamanho do "suffix" e o tamanho do destino ou da origem não combinam
-% The register size and the opcode size suffix don't match. This is
-% probably an error in the assembler statement
-asmr_e_syntax_error=07047_E_Erro de sintaxe assembly
-% There is an assembler syntax error
-asmr_e_invalid_opcode_and_operand=07048_E_Combinação de opcode e operandos inválida
-% The opcode cannot be used with this type of operand
-asmr_e_syn_operand=07049_E_Erro de sintaxe assembly em operando
-asmr_e_syn_constant=07050_E_Erro de sintaxe assembly em constante
-asmr_e_invalid_string_expression=07051_E_Expressão string inválida
-asmr_w_const32bit_for_address=07052_W_Constante com símbolo $1 para endereço que não está numa pointer
-% A constant expression represents an address which does not fit
-% into a pointer. The address is probably incorrect
-asmr_e_unknown_opcode=07053_E_Opcode não reconhecido $1
-% This opcode is not known
-asmr_e_invalid_or_missing_opcode=07054_E_Opcode inválido ou ausente
-asmr_e_invalid_prefix_and_opcode=07055_E_Combinação de opcode e prefixo inválida: $1
-asmr_e_invalid_override_and_opcode=07056_E_Combinação inválida de opcode e override: $1
-asmr_e_too_many_operands=07057_E_Operandos em excesso numa linha
-% There are too many operands for this opcode. Check your
-% assembler syntax
-asmr_w_near_ignored=07058_W_NEAR ignorado
-asmr_w_far_ignored=07059_W_FAR ignorado
-asmr_e_dup_local_sym=07060_E_Símbolo local duplicado $1
-asmr_e_unknown_local_sym=07061_E_Símbolo local não definido $1
-asmr_e_unknown_label_identifier=07062_E_Label desconhecido $1
-asmr_e_invalid_register=07063_E_Nome de registrador inválido
-% There is an unknown register name used as operand.
-asmr_e_invalid_fpu_register=07064_E_Nome de registrador de ponto flutuante inválido
-% There is an unknown register name used as operand.
-asmr_w_modulo_not_supported=07066_W_Função "mod"(resto) não suportada
-asmr_e_invalid_float_const=07067_E_Constante de ponto flutuante inválida $1
-% The floating point constant declared in an assembler block is
-% invalid.
-asmr_e_invalid_float_expr=07068_E_Expressão de ponto flutuante inválida
-% The floating point expression declared in an assembler block is
-% invalid.
-asmr_e_wrong_sym_type=07069_E_Símbolo de tipo inválido
-asmr_e_cannot_index_relative_var=07070_E_Nao pode indexar com registrador uma variável local ou parâmetro(que já são indexados a 1 reg. base)
-% Trying to index using a base register a symbol which is already relative
-% to a register. This is not possible, and will probably lead to crashes.
-asmr_e_invalid_seg_override=07071_E_Expressão com override inválido de segmento
-asmr_w_id_supposed_external=07072_W_Identificador $1 assumido como external
-% There is a reference to an undefined symbol. This will not result
-% in an error, since the symbol might be external, but may cause
-% problems at link time if the symbol is not defined anywhere.
-asmr_e_string_not_allowed_as_const=07073_E_Strings não permitidos como constantes
-% Character strings are not allowed as constants.
-asmr_e_no_var_type_specified=07074_Nenhum tipo de variável especificado
-% The syntax expects a type idenfitifer after the dot, but
-% none was found.
-asmr_w_assembler_code_not_returned_to_text=07075_E_O codigo assembly não gera retorno a seção de texto
-% There was a directive in the assembler block to change sections,
-% but there is a missing return to the text section at the end
-% of the assembler block. This might cause errors during link time.
-asmr_e_not_directive_or_local_symbol=07076_E_Não é uma diretiva nem um símbolo local $1
-% This symbol is unknown.
-asmr_w_using_defined_as_local=07077_E_Usando um nome auto-definido como label local
-asmr_e_dollar_without_identifier=07078_E_Um símbolo "$" usado sem estar no início de 1 identificador
-% A constant expression has an identifier which does not start with
-% the $ symbol.
-asmr_w_32bit_const_for_address=07079_W_Criada uma constante de 32 bits para endereçamento
-% A constant was used as an address. This is probably an error,
-% since using absolute addresses will probably not work.
-asmr_n_align_is_target_specific=07080_N_.align é especifico de plataforma, use .balign ou .p2align
-% Using the .align directive is platform specific, and its meaning will vary
-% from one platform to another.
-asmr_e_cannot_access_field_directly_for_parameters=07081_E_Não pode acessar diretamente os campos de parâmetros
-% You should load the parameter first into a register and then access the
-% fields using that register.
-asmr_e_cannot_access_object_field_directly=07082_E_Não pode acessar diretamente campos de objetos/classes
-% You should load the self pointer first into a register and then access the
-% fields using the register as base. By default the self pointer is available
-% in the esi register on i386.
-asmr_e_unable_to_determine_reference_size=07083_E_Não especificado tamanho e não foi possível determinar o tamanho dos operandos
-% You should specify explicitly a size for the reference, because
-% the compiler is unable to determine what size (byte,word,dword,etc.) it
-% should use for the reference.
-asmr_e_cannot_use_RESULT_here=07084_E_Não pode usar RESULT nesta function
-% Some functions which return complex types cannot use the \var{result}
-% keyword.
-asmr_w_adding_explicit_args_fXX=07086_W_"$1" sem operando traduzido para "$1 %st,%st(1)"
-asmr_w_adding_explicit_first_arg_fXX=07087_W_"$1 %st(n)" traduzido para "$1 %st,%st(n)"
-asmr_w_adding_explicit_second_arg_fXX=07088_W_"$1 %st(n)" traduzido para "$1 %st(n),%st"
-asmr_e_invalid_char_smaller=07089_E_O caracter < não é permitido aqui
-% The shift operator requires the << characters. Only one
-% of those characters was found.
-asmr_e_invalid_char_greater=07090_E_O caracter > não é permitido aqui
-% The shift operator requires the >> characters. Only one
-% of those characters was found.
-asmr_w_align_not_supported=07093_W_ALIGN não suportado
-asmr_e_no_inc_and_dec_together=07094_E_"Inc" e "Dec" não podem estar juntos
-% Trying to use an increment and a decrement within the same
-% opcode on the 680x0. This is impossible.
-asmr_e_invalid_reg_list_in_movem=07095_E_Registrador(es) inválido(s) para "movem"
-% Trying to use the \var{movem} opcode with invalid registers
-% to save or restore.
-asmr_e_invalid_reg_list_for_opcode=07096_E_Registrador(es) inválidos para o opcode
-asmr_e_higher_cpu_mode_required=07097_E_Requerido modo de CPU mais avançado ($1)
-% Trying to use an instruction which is not supported in the current
-% cpu mode. Use a higher cpu generation to be able to use this
-% opcode in your assembler block
-asmr_w_unable_to_determine_reference_size_using_dword=07098_W_Não foi especificado tamanho e não é possivel determinar o tamanho dos operandos, DWORD usado como default
-% You should specify explicitly a size for the reference, because
-% the compiler is unable to determine what size (byte,word,dword,etc.) it
-% should use for the reference. This warning is only used in Delphi mode where
-% it falls back to use DWORD as default.
-asmr_e_illegal_shifterop_syntax=07099_E_Erro de sintaxe enquanto tentava montar uma operação de "shift"
-% ARM only; ARM assembler supports a so called shifter operand. The used syntax isn't
-% a valid shifter operand. Example for an operation with shifter operand:
-% \begin{verbatim}
-% asm
-%   orr     r2,r2,r2,lsl #8
-% end;
-% \end{verbatim}
-#
-# Assembler/binary writers
-#
-# 08018 is the last used one
-#
-asmw_f_too_many_asm_files=08000_F_Excesso de arquivos assembly
-% With smartlinking enabled, there are too many assembler
-% files generated. Disable smartlinking.
-asmw_f_assembler_output_not_supported=08001_F_Tipo de saida do assembler não suportado
-asmw_f_comp_not_supported=08002_F_"Comp" não suportado
-asmw_f_direct_not_supported=08003_F_"Direct" não suportado para "binary writers"
-% Direct assembler mode is not supported for binary writers.
-asmw_e_alloc_data_only_in_bss=08004_E_Alocação de dados só é permitida na seção bss
-asmw_f_no_binary_writer_selected=08005_F_Nenhum "binary writer" selecionado
-asmw_e_opcode_not_in_table=08006_E_Assembler: Opcode $1 não existe na tabela
-asmw_e_invalid_opcode_and_operands=08007_E_Asssmbler: $1 combinação de opcode e operadores inválida
-asmw_e_16bit_not_supported=08008_E_Assembler: Referências de 16 bits não suportadas
-asmw_e_invalid_effective_address=08009_E_Assembler: Endereço efetivo inválido
-asmw_e_immediate_or_reference_expected=08010_E_Assembler: Esperados um operador imediato ou uma referência
-asmw_e_value_exceeds_bounds=08011_E_Assembler: Valor de $1 excede os limites de $2
-asmw_e_short_jmp_out_of_range=08012_E_Assembler: "Short jump" fora de faixa $1("short jump" gera troca de segmento de memória?)
-asmw_e_undefined_label=08013_E_Assembler: Label indefinido $1
-asmw_e_comp_not_supported=08014_E_Assembler: Type "Comp" não suportado na plataforma destino
-asmw_e_extended_not_supported=08015_E_Assembler: "Type" Extended não suportado na plataforma destino
-asmw_e_duplicate_label=08016_E_Assembler: Label duplicado $1
-asmw_e_redefined_label=08017_E_Assembler: Label redefinido $1
-asmw_e_first_defined_label=08018_E_Assembler: Definido a primeira vez aqui
-asmw_e_invalid_register=08019_E_Assembler: Registrador inválido $1
-asmw_e_16bit_32bit_not_supported=08020_E_Asm: Referencias em 16 e 32 bits não suportadas
-asmw_e_64bit_not_supported=08021_E_Asm: Operandos de 64 bits não suportados
-
-#
-# Executing linker/assembler
-#
-# 09034 is the last used one
-#
-# BeginOfTeX
-%
-% \section{Errors of assembling/linking stage}
-% This section lists errors that occur when the compiler is processing the
-% command line or handling the configuration files.
-% \begin{description}
-exec_w_source_os_redefined=09000_W_Sist Oper fonte redefinido
-exec_i_assembling_pipe=09001_I_Montagem em andamento $1
-exec_d_cant_create_asmfile=09002_E_Assembler não pode criar o arquivo $1
-% The mentioned file can't be created. Check if you have got
-% access permissions to create this file
-exec_e_cant_create_objectfile=09003_E_Não pode criar o arquivo objeto: $1
-% The mentioned file can't be created. Check if you've
-% got access permissions to create this file
-exec_e_cant_create_archivefile=09004_E_Não pode criar o arquivo "archive": $1
-% The mentioned file can't be created. Check if you've
-% access permissions to create this file
-exec_e_assembler_not_found=09005_E_Assembler $1 não encontrado, mudando para montagem assembly externa
-exec_t_using_assembler=09006_T_Usando o assembler: $1
-exec_e_error_while_assembling=09007_E_Erro durante a montagem assembly -> exitcode $1
-% There was an error while assembling the file using an external assembler.
-% Consult the documentation of the assembler tool to find out more information
-% on this error.
-exec_e_cant_call_assembler=09008_E_Não pode chamar o assembler, erro $1. Mudando para montagem assembly externa
-exec_i_assembling=09009_I_Montando $1
-exec_i_assembling_smart=09010_I_Montagem com smartlinking $1
-exec_w_objfile_not_found=09011_W_Objeto $1 não encontrado, a link-edição pode falhar!
-% One of the object file is missing, and linking will probably fail.
-% Check your paths.
-exec_w_libfile_not_found=09012_W_Library $1 não encontrada, a link-edição pode falhar!
-% One of the library file is missing, and linking will probably fail.
-% Check your paths.
-exec_e_error_while_linking=09013_E_Erro durante a link-edição
-% Generic error while linking.
-exec_e_cant_call_linker=09014_E_Não pode chamar o linkage editor interno, mudando para link-edição externa
-exec_i_linking=09015_I_Link edição de $1
-exec_e_util_not_found=09016_E_Utilitário $1 não encontrado, mudando para link-edição externa
-exec_t_using_util=09017_T_Usando utilitário $1
-exec_e_exe_not_supported=09018_E_Criação de executáveis não suportada
-exec_e_dll_not_supported=09019_E_Criação de libraries Dynamic/Shared não suportada
-exec_i_closing_script=09020_I_Fechando script $1
-exec_e_res_not_found=09021_E_Recurso do compilador não encontrado, mudando para modo externo
-exec_i_compilingresource=09022_I_Recurso de compilação $1
-exec_t_unit_not_static_linkable_switch_to_smart=09023_T_A "unit" $1 não pode ser link-editada de forma estática, mudando para o modo "smart linking"
-exec_t_unit_not_smart_linkable_switch_to_static=09024_T_A "unit" $1 não pode ser link-editada no modo "smart linking", mudando para link-edição estática
-exec_t_unit_not_shared_linkable_switch_to_static=09025_T_A "unit" $1 nao pode ser link-editada em modo "shared linking", mudando para link-edicao estática
-exec_e_unit_not_smart_or_static_linkable=09026_E_A "unit" $1 não pode ser link-editada nem no modo "smart linking" nem em link-edição estática
-exec_e_unit_not_shared_or_static_linkable=09027_E_A "unit" $1 não pode ser link-editada nem no modo "shared linking" nem em link-edição estática
-exec_d_resbin_params=09028_D_Chamando o compilador "$1" com a linha de comando "$2"
-%\end{description}
-# EndOfTeX
-
-#
-# Executable information
-#
-execinfo_f_cant_process_executable=09128_F_Não pode pós-processar o executável $1
-execinfo_f_cant_open_executable=09129_F_Não pode abrir o executável $1
-execinfo_x_codesize=09130_X_Tamanho do código: $1 bytes
-execinfo_x_initdatasize=09131_X_Tamanho da área de dados inicializados: $1 bytes
-execinfo_x_uninitdatasize=09132_X_Tamanho da área de dados não-inicializados: $1 bytes
-execinfo_x_stackreserve=09133_X_Espaço reservado para o stack: $1 bytes
-execinfo_x_stackcommit=09134_X_Espaço realmente usado pelo stack: $1 bytes
-
-#
-# Unit loading
-#
-# 10041 is the last used one
-#
-# BeginOfTeX
-% \section{Unit loading messages.}
-% This section lists all messages that can occur when the compiler is
-% loading a unit from disk into memory. Many of these messages are
-% informational messages.
-% \begin{description}
-unit_t_unitsearch=10000_T_Caminho onde o compilador tentará achar "units": $1
-% When you use the \var{-vt}, the compiler tells you where it tries to find
-% unit files.
-unit_t_ppu_loading=10001_T_"Units" carregadas pelo compilador $1 (.PPU)
-% When the \var{-vt} switch is used, the compiler tells you
-% what units it loads.
-unit_u_ppu_name=10002_U_Nome da "unit"(.PPU): $1
-% When you use the \var{-vu} flag, the unit name is shown.
-unit_u_ppu_flags=10003_U_Flags da "unit"(.PPU): $1
-% When you use the \var{-vu} flag, the unit flags are shown.
-unit_u_ppu_crc=10004_U_Check sum da "unit"(.PPU): $1
-% When you use the \var{-vu} flag, the unit CRC check is shown.
-unit_u_ppu_time=10005_U_Data de compilação da "unit"(.PPU): $1
-% When you use the \var{-vu} flag, the time the unit was compiled is shown.
-unit_u_ppu_file_too_short=10006_U_Arquivo PPU da "unit" muito pequeno
-% The ppufile is too short, not all declarations are present.
-unit_u_ppu_invalid_header=10007_U_Header de arquivo PPU(de uma "unit") inválido(não tem PPU no início)
-% A unit file contains as the first three bytes the ascii codes of \var{PPU}
-unit_u_ppu_invalid_version=10008_U_Versão de arquivo PPU(de uma "unit") inválida $1
-% This unit file was compiled with a different version of the compiler, and
-% cannot be read.
-unit_u_ppu_invalid_processor=10009_U_"Unit"(arquivo PPU) compilada para outro processador
-% This unit file was compiled for a different processor type, and
-% cannot be read
-unit_u_ppu_invalid_target=10010_U_"Unit"(arquivo PPU) foi compilada para outro sistema operacional
-% This unit file was compiled for a different target, and
-% cannot be read
-unit_u_ppu_source=10011_U_Check sum do arquivo PPU da "unit": $1
-% When you use the \var{-vu} flag, the unit source file name is shown.
-unit_u_ppu_write=10012_U_Gravando as "units"(arquivos PPU) em: $1
-% When you specify the \var{-vu} switch, the compiler will tell you where it
-% writes the unit file.
-unit_f_ppu_cannot_write=10013_F_Nao pode gravar o arquivo PPU
-% An error occurred when writing the unit file.
-unit_f_ppu_read_error=10014_F_Erro durante a leitura de um arquivo PPU
-% This means that the unit file was corrupted, and contains invalid
-% information. Recompilation will be necessary.
-unit_f_ppu_read_unexpected_end=10015_F_Fim de arquivo PPU inesperado
-% Unexpected end of file. This may mean that the PPU file is
-% corrupted.
-unit_f_ppu_invalid_entry=10016_F_Arquivo PPU em formato inválido: $1
-% The unit the compiler is trying to read is corrupted, or generated with a
-% newer version of the compiler.
-unit_f_ppu_dbx_count_problem=10017_F_Problema na contagem Dbx
-% There is an inconsistency in the debugging information of the unit.
-unit_e_illegal_unit_name=10018_E_Nome da "unit" inválido $1. Diverge do nome do arquivo que a contem.
-% The name of the unit does not match the file name.
-unit_f_too_much_units=10019_F_Há "units" demais. Excedem o limite definido para a compilação(diretiva maxunits)
-% \fpc has a limit of 1024 units in a program. You can change this behavior
-% by changing the \var{maxunits} constant in the \file{fmodule.pas} file of the
-% compiler, and recompiling the compiler.
-unit_f_circular_unit_reference=10020_F_"Units" $1 e $2 referem-se mutuamente(referência circular)
-% Two units are using each other in the interface part. This is only allowed
-% in the \var{implementation} part. At least one unit must contain the other one
-% in the \var{implementation} section.
-unit_f_cant_compile_unit=10021_F_"Unit" $1 precisa ser recompilada mas o fonte não foi encontrado
-% A unit was found that needs to be recompiled, but no sources are
-% available.
-unit_f_cant_find_ppu=10022_F_"Unit"(arquivo PPU) "$1" não pode ser encontrada
-% You tried to use a unit of which the PPU file isn't found by the
-% compiler. Check your configuration file for the unit paths
-unit_w_unit_name_error=10023_W_"Unit" $1 não foi encontrada mas a $2 existe
-unit_f_unit_name_error=10024_F_"Unit" $1 procurada mas a $2 foi encontrada
-% Dos truncation of 8 letters for unit PPU files
-% may lead to problems when unit name is longer than 8 letters.
-unit_w_switch_us_missed=10025_W_Para compilar a "unit" System tem que usar a diretiva -Us
-% When recompiling the system unit (it needs special treatment), the
-% \var{-Us} must be specified.
-unit_f_errors_in_unit=10026_F_Houve $1 erros compilando o módulo, compilação abortada
-% When the compiler encounters a fatal error or too many errors in a module
-% then it stops with this message.
-unit_u_load_unit=10027_U_Carregando $3 a partir da "unit" $1. A carga foi requisitada em $2.
-% When you use the \var{-vu} flag, which unit is loaded from which unit is
-% shown.
-unit_u_recompile_crc_change=10028_U_Recompilando a "unit" $1, checksum mudou para $2
-unit_u_recompile_source_found_alone=10029_U_Recompilando $1 porque foi encontrado somente o fonte
-% When you use the \var{-vu} flag, these messages tell you why the current
-% unit is recompiled.
-unit_u_recompile_staticlib_is_older=10030_U_Recompilando a "unit", algum das "static libraries" é mais antiga que o arquivo PPU
-% When you use the \var{-vu} flag, the compiler warns if the static library
-% of the unit are older than the unit file itself.
-unit_u_recompile_sharedlib_is_older=10031_U_Recompilando a "unit", a "shared lib" ‚ mais antiga que o ppufile
-% When you use the \var{-vu} flag, the compiler warns if the shared library
-% of the unit are older than the unit file itself.
-unit_u_recompile_obj_and_asm_older=10032_U_Recompilando a "unit". Módulos obj e asm tem data mais antiga que o PPU
-% When you use the \var{-vu} flag, the compiler warns if the assembler or
-% object file of the unit are older than the unit file itself.
-unit_u_recompile_obj_older_than_asm=10033_U_Recompilando a "unit". Módulo obj mais antigo que o asm
-% When you use the \var{-vu} flag, the compiler warns if the assembler
-% file of the unit is older than the object file of the unit.
-unit_u_parsing_interface=10034_U_Interpretando interface da "unit" $1
-% When you use the \var{-vu} flag, the compiler warns that it starts
-% parsing the interface part of the unit
-unit_u_parsing_implementation=10035_U_Interpretando implementation da "unit" $1
-% When you use the \var{-vu} flag, the compiler warns that it starts
-% parsing the implementation part of the unit
-unit_u_second_load_unit=10036_U_Segunda carga da "unit" $1
-% When you use the \var{-vu} flag, the compiler warns that it starts
-% recompiling a unit for the second time. This can happend with interdepend
-% units.
-unit_u_check_time=10037_U_Verificando arquivo PPU $1 data/hora $2
-% When you use the \var{-vu} flag, the compiler show the filename and
-% date and time of the file which a recompile depends on
-### The following two error msgs is currently disabled.
-#unit_h_cond_not_set_in_last_compile=10038_H_Conditional $1 was not set at startup in last compilation of $2
-#% when recompilation of an unit is required the compiler will check that
-#% the same conditionals are set for the recompiliation. The compiler has
-#% found a conditional that currently is defined, but was not used the last
-#% time the unit was compiled.
-#unit_h_cond_set_in_last_compile=10039_H_Conditional $1 was set at startup in last compilation of $2
-#% when recompilation of an unit is required the compiler will check that
-#% the same conditionals are set for the recompiliation. The compiler has
-#% found a conditional that was used the last time the unit was compiled, but
-#% the conditional is currently not defined.
-unit_w_cant_compile_unit_with_changed_incfile=10040_W_Não pode recompilar "unit" $1, mas foram encontrados arquivos de include modificados
-% A unit was found to have modified include files, but
-% some source files were not found, so recompilation is impossible.
-unit_h_source_modified=10041_H_Arquivo $1 é mais recente que o arquivo PPU $2 que foi compilado com flag de release -Ur
-% A modified source file for a unit was found that was compiled with the
-% release flag (-Ur). The unit will not implicitly be recompiled because
-% this release flag is set.
-unit_u_ppu_invalid_fpumode=10042_U_Usando uma "unit" que foi compilada com tipo diferente de emulação de ponto flutuante(FPU)
-% Trying to compile code while using units which were not compiled with
-% the same floating point format mode. Either all code should be compiled
-% with FPU emulation on, or with FPU emulation off.
-unit_u_loading_interface_units=10043_U_Incluindo "units" relacionadas na interface da "unit" $1
-% When you use the \var{-vu} flag, the compiler warns that it starts
-% loading the units defined in the interface part of the unit.
-unit_u_loading_implementation_units=10044_U_Incluindo "units" relacionadas na implementation da "unit" $1
-% When you use the \var{-vu} flag, the compiler warns that it starts
-% loading the units defined in the implementation part of the unit.
-unit_u_interface_crc_changed=10045_U_Check sum da Interface modificado para a "unit" $1
-% When you use the \var{-vu} flag, the compiler warns that it the
-% CRC calculated for the interface has been changed after the implementation
-% has been parsed.
-unit_u_implementation_crc_changed=10046_U_Check sum da Implementation modificado para a "unit" $1
-% When you use the \var{-vu} flag, the compiler warns that it the
-% CRC calculated has been changed after the implementation
-% has been parsed.
-unit_u_finished_compiling=10047_U_Compilação da "unit" $1 terminada
-% When you use the \var{-vu} flag, the compiler warns that it
-% has finished compiling the unit.
-unit_u_add_depend_to=10048_U_Dependência de $1 adicionada a $2
-% When you use the \var{-vu} flag, the compiler warns that it
-% has added a dependency between the two units.
-unit_u_no_reload_is_caller=10049_U_Não precisa carregar de novo, "unit" já está carregada $1
-% When you use the \var{-vu} flag, the compiler warns that it
-% has will not reload the unit because it is the unit that wants
-% to load this unit
-unit_u_no_reload_in_second_compile=10050_U_Não precisa carregar a unit de novo, é uma recompilação $1
-% When you use the \var{-vu} flag, the compiler warns that it
-% has will not reload the unit because it is already in a second recompile
-unit_u_flag_for_reload=10051_U_Recarregando: $1
-% When you use the \var{-vu} flag, the compiler warns that it
-% has to reload the unit
-unit_u_forced_reload=10052_U_Recarga forçada
-% When you use the \var{-vu} flag, the compiler warns that it
-% has is reloading the unit because it was required
-unit_u_previous_state=10053_U_Estado anterior de $1: $2
-% When you use the \var{-vu} flag, the compiler shows the
-% previous state of the unit
-unit_u_second_compile_unit=10054_U_Já compilando $1, setando opção de recompilação
-% When you use the \var{-vu} flag, the compiler warns that it starts
-% recompiling a unit for the second time. This can happend with interdepend
-% units.
-unit_u_loading_unit=10055_U_Carregando a "unit" $1
-% When you use the \var{-vu} flag, the compiler warns that it starts
-% loading the unit.
-unit_u_finished_loading_unit=10056_U_Carga da "unit" $1 terminada
-% When you use the \var{-vu} flag, the compiler warns that it finished
-% loading the unit.
-unit_u_registering_new_unit=10057_U_Registrando a nova "unit" $1
-% When you use the \var{-vu} flag, the compiler warns that it has
-% found a new unit and registers it in the internal lists.
-unit_u_reresolving_unit=10058_U_Recalculando área de dados da "unit" $1
-% When you use the \var{-vu} flag, the compiler warns that it
-% has to recalculate the internal data of the unit
-unit_u_skipping_reresolving_unit=10059_U_Pulando o recalculo da área de dados da "unit" $1, "units" usadas já carregadas
-% When you use the \var{-vu} flag, the compiler warns that it
-% skips to recalculate the internal data of the unit because there
-% is no data to recalculate
-% \end{description}
-# EndOfTeX
-
-#
-#  Options
-#
-# 11039 is the last used one
-#
-option_usage=11000_O_$1 [opções] <arquivo entrada> [opções]
-# BeginOfTeX
-%
-% \section{Command-line handling errors}
-% This section lists errors that occur when the compiler is processing the
-% command line or handling the configuration files.
-% \begin{description}
-option_only_one_source_support=11001_W_Suportado apenas um arquivo fonte
-% You can specify only one source file on the command line. The first
-% one will be compiled, others will be ignored. This may indicate that
-% you forgot a \var{'-'} sign.
-option_def_only_for_os2=11002_W_Arquivo DEF só pode ser criado para OS/2
-% This option can only be specified when you're compiling for OS/2
-option_no_nested_response_file=11003_E_Response files aninhados não permitidos
-% you cannot nest response files with the \var{@file} command-line option.
-option_no_source_found=11004_F_Nenhum arquivo fonte especifica na linha de comando
-% The compiler expects a source file name on the command line.
-option_no_option_found=11005_N_Nenhuma opção dentro do arquivo de configuração $1
-% The compiler didn't find any option in that config file.
-option_illegal_para=11006_E_Parâmetro inválido: $1
-% You specified an unknown option.
-option_help_pages_para=11007_H_"-?" exibe páginas de help
-% When an unknown option is given, this message is diplayed.
-option_too_many_cfg_files=11008_F_Muitos arquivos de configuração aninhados(+ de 16 níveis)
-% You can only nest up to 16 config files.
-option_unable_open_file=11009_F_Não foi possível abrir arquivo $1
-% The option file cannot be found.
-option_reading_further_from=11010_D_Lendo opções adicionais de $1
-% Displayed when you have notes turned on, and the compiler switches
-% to another options file.
-option_target_is_already_set=11011_W_Sistema operacional destino já está setado para: $1
-% Displayed if more than one \var{-T} option is specified.
-option_no_shared_lib_under_dos=11012_W_Libraries shared não suportados em DOS, revertendo para libraries estáticas
-% If you specify \var{-CD} for the \dos platform, this message is displayed.
-% The compiler supports only static libraries under \dos
-option_too_many_ifdef=11013_F_IF(N)DEFs em excesso
-% the \var{\#IF(N)DEF} statements in the options file are not balanced with
-% the \var{\#ENDIF} statements.
-option_too_many_endif=11014_F_ENDIFs em excesso
-% the \var{\#IF(N)DEF} statements in the options file are not balanced with
-% the \var{\#ENDIF} statements.
-option_too_less_endif=11015_F_Comando de compilação condicional não fechado no final de arquivo
-% the \var{\#IF(N)DEF} statements in the options file are not balanced with
-% the \var{\#ENDIF} statements.
-option_no_debug_support=11016_W_Este executável do compilador não suporta geração de informações de debug
-% It is possible to have a compiler executable that doesn't support
-% the generation of debugging info. If you use such an executable with the
-% \var{-g} switch, this warning will be displayed.
-option_no_debug_support_recompile_fpc=11017_H_Tente recompilar com -dGDB
-% It is possible to have a compiler executable that doesn't support
-% the generation of debugging info. If you use such an executable with the
-% \var{-g} switch, this warning will be displayed.
-option_obsolete_switch=11018_W_Voce está usando uma diretiva obsoleta $1
-% this warns you when you use a switch that is not needed/supported anymore.
-% It is recommended that you remove the switch to overcome problems in the
-% future, when the switch meaning may change.
-option_obsolete_switch_use_new=11019_W_Voce está usando a diretiva obsoleta $1, por favor use $2
-% this warns you when you use a switch that is not supported anymore. You
-% must now use the second switch instead.
-% It is recommended that you change the switch to overcome problems in the
-% future, when the switch meaning may change.
-option_switch_bin_to_src_assembler=11020_N_Mudando assembler para o modo default de fonte
-% this notifies you that the assembler has been changed because you used the
-% -a switch which can't be used with a binary assembler writer.
-option_incompatible_asm=11021_W_Tipo de saída assembler selecionada "$1" não compatível com "$2"
-option_asm_forced=11022_W_Forçado uso de assembler "$1"
-% The assembler output selected can not generate
-% object files with the correct format. Therefore, the
-% default assembler for this target is used instead.
-option_using_file=11026_T_Lendo opções a partir do arquivo $1
-% Options are also read from this file
-option_using_env=11027_T_Lendo opções da variável de ambiente $1
-% Options are also read from this environment string
-option_handling_option=11028_D_Tratando opção "$1"
-% Debug info that an option is found and will be handled
-option_help_press_enter=11029__*** pressione enter ***
-option_start_reading_configfile=11030_H_Início do tratamento do arquivo de configuração $1
-% Starting of config file parsing.
-option_end_reading_configfile=11031_H_Fim do arquivo durante leitura do arquivo de configuração $1
-% End of config file parsing.
-option_interpreting_option=11032_D_Interpretando a opção "$1"
-option_interpreting_firstpass_option=11036_D_Interpretando a opção de primeiro passo "$1"
-option_interpreting_file_option=11033_D_Interpretando opção de arquivo "$1"
-option_read_config_file=11034_D_Lendo o arquivo de configuração "$1"
-option_found_file=11035_D_Encontrado o arquivo fonte "$1"
-% Additional infos about options, displayed
-% when you have debug option turned on.
-option_code_page_not_available=11039_E_Página de código desconhecida
-option_config_is_dir=11040_F_Arquivo de configuração $1 é um diretório
-% Directories can not be used as configuration files.
-%\end{description}
-# EndOfTeX
-
-#
-# Logo (option -l)
-#
-option_logo=11023_[
-Free Pascal Compiler versão $FPCFULLVERSION [$FPCDATE] para $FPCCPU
-Copyright (c) 1993-2009 por Florian Klaempfl
-]
-
-#
-# Info (option -i)
-#
-option_info=11024_[
-Free Pascal Compiler versão $FPCVERSION
-
-Data do compilador : $FPCDATE
-Processador destino: $FPCCPU
-
-Sistemas operacionais atendidos
-  $OSTARGETS
-
-Conjuntos de instruções atendidos:
-  $INSTRUCTIONSETS
-
-Conjuntos de instruções de ponto flutuante atendidos:
-  $FPUINSTRUCTIONSETS
-
-Este programa vem sob a licença GNU General Public Licence
-Para mais informações leia COPYING.FPC
-
-Informações de erros detectados, sugestões, etc para:
-                 http://bugs.freepascal.org
-ou
-                 [email protected]
-]
-# Help pages
-option_help_pages=11025_[
-**0*_coloque + após 1 opção booleana para habilita-la, - para desabilita-la
-**1a_o compilador não deletou o arquivo assembly gerado
-**2al_Lista as linhas de código fonte do arquivo assembly
-**2an_lista as informações de node do arquivo assembly
-*L2ap_use pipes(redirecione) ao invés de criar arquivos assembly temporários
-**2ar_lista informações de alocação/liberação de registradores no arquivo asembly
-**2at_lista informaçoes de alocação/liberação temporárias no arquivo assembly
-**1A<x>_Formato de saída:
-**2Adefault_use o assembly default
-3*2Aas_Montagem feita usando o GNU AS
-3*2Anasmcoff_coff (Go32v2) file gerado usando Nasm
-3*2Anasmelf_elf32 (Linux) file gerado usando Nasm
-3*2Anasmwin32_Win32 object file gerado usando Nasm
-3*2Anasmwdosx_Win32/WDOSX object file gerado usando Nasm
-3*2Awasm_obj file gerado usando Wasm (Watcom)
-3*2Anasmobj_obj file gerado usando Nasm
-3*2Amasm_obj file gerado usando Masm (Microsoft)
-3*2Atasm_obj file gerado usando Tasm (Borland)
-3*2Aelf_elf32 (Linux) gerado usando uma internal writer
-3*2Acoff_coff (Go32v2) gerado usando uma internal writer
-3*2Apecoff_pecoff (Win32) gerado usando uma internal writer
-4*2Aas_Montagem feita usando o GNU AS
-6*2Aas_Unix o-file gerado usando o GNU AS
-6*2Agas_GNU Motorola assembler
-6*2Amit_MIT Syntax (old GAS)
-6*2Amot_Standard Motorola assembler
-A*2Aas_Montagem feita usando o GNU AS
-P*2Aas_Montagem feita usando o GNU AS
-S*2Aas_Montagem feita usando o GNU AS
-**1b_gera informações do browser
-**2bl_gera a local symbol information
-**1B_Compila/monta todos os módulos
-**1C<x>_opções de geração do código:
-**2Cc<x>_default calling convention setada para <x>
-**2CD_criar também a dynamic library (não suportado)
-**2Ce_Compilação com opcodes de ponto flutuante emulados
-**2Cf<x>_Selecione o conjunto de instruções de ponto flutuante a ser usado, veja diretiva -i do FPC para valores possíveis
-**2Cg_Gerar código com endereçamento relativo(endereçar usando só o deslocamento do operando)
-**2Ch<n>_define heap com <n> bytes (entre 1023->1KB e 67107840->64 MB)
-**2Ci_IO-checking(validação dos comandos de I/O)
-**2Cn_Não executar estágio de link-edição
-**2Co_Checar overflow de operações com inteiros
-**2Cp<x>_seleciona o conjunto de instruções, veja diretiva FPC -i para valores possíveis
-**2Cr_range checking(validação da faixa de validade de valores)
-**2CR_verificar validade das chamadas de métodos de objetos
-**2Cs<n>_seta o tamanho do stack para o valor <n>
-**2Ct_stack checking(verifica estouros da capacidade do stack)
-**2CX_criar também a smartlinked library
-**1d<x>_define o símbolo <x>
-**1D_gera um DEF file
-**2Dd<x>_seta a descrição para <x>
-**2Dv<x>_set a versão das DLL para <x>
-*O2Dw_PM application(usa o Presentation manager do OS/2)
-**1e<x>_seta o path para o executável
-**1E_o mesmo que -Cn
-**1F<x>_seta nomes de arquivos e paths:
-**2Fa<x>[,y]_para o programa primeiro carregar as "units" <x> e [y] antes de interpretar o "uses"
-**2Fc<x>_seta a página de código da entrada para <x>
-**2FD<x>_seta o diretório onde procurar pelas utilities do compilador
-**2Fe<x>_redireciona a saída de erros para <x>
-**2FE<x>_seta a saída de exe/units para o path <x>
-**2Fi<x>_adiciona <x> ao(s) path(s) de include
-**2Fl<x>_adiciona <x> ao library path
-**2FL<x>_usa <x> como dynamic linker
-**2Fo<x>_adiciona <x> ao object path
-**2Fr<x>_carrega o arquivo de mensagens de erro <x>
-**2Fu<x>_adiciona <x> ao unit path
-**2FU<x>_seta o unit output path para <x>, anula o informado na diretiva -FE
-*g1g_gerar informações para o depurador(debugger)
-*g2gc_gerar checagem de pointers
-*g2gd_usar dbx
-*g2gg_usar gsym
-*g2gh_Usar "unit" de trace de heap (para depuração de descontinuidade de memória)
-*g2gl_usar unit com informações de números de linhas para obter msgs de erro com seu número de linha
-*g2gv_gerar programas traçáveis com valgrind
-*g2gw_gerar informações de depuração para dwarf
-**1i_informações
-**2iD_retorna a data de compilação do compilador
-**2iV_retorna a versão do compilador
-**2iSO_retorna o sistema operacional onde está sendo feita a compilação
-**2iSP_retorna o processador do compilador
-**2iTO_retorna o sistema operacional para o qual será gerado o executável
-**2iTP_retorna o processador para o qual será gerado o executável
-**1I<x>_adiciona <x> ao(s) path(s) de include
-**1k<x>_Passa <x> para o linkage editor
-**1l_escreva as mensagens de identificação
-**1M<x>_seta language mode para <x>(delphi, FPC, etc.)
-**2Mfpc_dialeto free pascal (default)
-**2Mobjfpc_ativa algumas extensões do Delphi 2
-**2Mdelphi_Tenta manter compatibilidade com o Delphi
-**2Mtp_Tenta manter a compatibilidade com TP/BP 7.0
-**2Mgpc_Tenta manter compatibilidade com gpc
-**2Mmacpas_Tenta manter compatibilidade com os dialetos do macintosh pascal
-**1n_não ler o arquivo de configuração default
-**2Nu_expanda o conteúdo dos loops
-**1o<x>_Troca o nome do executável produzido para <x>
-**1O<x>_otimizações:
-3*2Og_gera codigo(executável) menor
-3*2OG_gera codigo(executável) mais rápido(default)
-**2Or_mantem certas variáveis em registradores
-3*2Ou_ativa otimizações incertas (veja documentação)
-3*2O1_otimizações de nível 1 (optimizações rápidas)
-3*2O2_otimizações de nível 2(-O1 optimizações + lentas)
-3*2O3_otimizações de nível 3(-O2 repetidamente, max 5 vezes)
-3*2Op<x>_processador para o qual será gerado o executável(target)
-3*3Op1_seta processador destino como 386/486
-3*3Op2_seta processador destino como Pentium/PentiumMMX (tm)
-3*3Op3_seta processador destino como PPro/PII/c6x86/K6 (tm)
-6*2Og_gera código(executável) menor
-6*2OG_gera código(executável) mais rápido(default)
-6*2Ox_otimize ao máximo(ainda com problemas!!!)
-6*2O0_seta como processador destino(gera executável para) o MC68000
-6*2O2_seta como processador destino(gera executável para) o MC68020+ (default)
-**1pg_gera perfil para gprof (cria o FPC_PROFILE)
-**1R<x>_estilo de leitura do assembler:
-**2Rdefault_use o assembler default
-3*2Ratt_ler assembly no estilo AT&T
-3*2Rintel_ler assembly no estilo Intel
-6*2RMOT_ler assembly no estilo motorola
-**1S<x>_opções de sintaxe:
-**2S2_o mesmo que -Mobjfpc
-**2Sc_suporta operadores como o C (*=,+=,/= and -=)
-**2Sa_include assertion code.
-**2Sd_o mesmo que -Mdelphi
-**2Se<x>_opções de erro. <x> é uma combinação do seguinte:
-**3*_<n> : compilador para após <n> erros (o default é 1)
-**3*_w : compilador também para após warnings
-**3*_n : compilador também para após notes
-**3*_h : compilador também para após hints
-**2Sg_permitir LABEL e GOTO
-**2Sh_Use strings do tipo ansistring
-**2Si_dar suporte a INLINE estilo C++
-**2SI<x>_setar estilo de interface para <x>
-**3SIcom_interface compatível com COM (default)
-**3SIcorba_interface compatível com CORBA
-**2Sm_suporta macros como o C (global)
-**2So_o mesmo que -Mtp
-**2Sp_o mesmo que -Mgpc
-**2Ss_constructor tem que se chamar init (destructor tem que se chamar done)
-**2St_permitir a keyword static em objetos
-**1s_não chamar o assembler nem linker
-**2sh_Gerar script para link edição no host
-**2st_Gerar script para link edição no sistema operacional de destino
-**2sr_Pular a fase de alocação de registradores (usar com -alr)
-**1T<x>_Sistema operacional para o qual será gerado o executável(target):
-3*2Temx_OS/2 via EMX (incluindo o extensor EMX/RSX)
-3*2Tfreebsd_FreeBSD
-3*2Tgo32v2_Versao 2 do DJ Delorie DOS extender
-3*2Tlinux_Linux
-3*2Tnetbsd_NetBSD
-3*2Tnetware_Novell Netware Module (clib)
-3*2Tnetwlibc_Novell Netware Module (libc)
-3*2Topenbsd_OpenBSD
-3*2Tos2_OS/2 / eComStation
-3*2Tsunos_SunOS/Solaris
-3*2Twatcom_Watcom compatible DOS extender
-3*2Twdosx_WDOSX DOS extender
-3*2Twin32_Windows 32 Bit
-4*2Tlinux_Linux
-6*2Tamiga_Commodore Amiga
-6*2Tatari_Atari ST/STe/TT
-6*2Tlinux_Linux/m68k
-6*2Tmacos_Macintosh m68k (not supported)
-6*2Tpalmos_PalmOS
-A*2Tlinux_Linux
-P*2Tdarwin_Darwin and MacOS X on PowerPC
-P*2Tlinux_Linux on PowerPC
-P*2Tmacos_MacOS (classic) on PowerPC
-P*2Tmorphos_MorphOS
-S*2Tlinux_Linux
-**1u<x>_excluir definição do símbolo <x>
-**1U_opções de "unit":
-**2Un_não verifique o nome da "unit"
-**2Ur_gerar arquivos de "unit" do tipo "release"
-**2Us_compilar uma "unit" system
-**1v<x>_Mostrar opções de compilação. <x> é uma combinação das seguintes letras:
-**2*_e : Mostrar erros (default)     0 : Mostrar somente erros
-**2*_w : Mostrar avisos              u : Mostrar informações da "unit"
-**2*_n : Mostrar "notes"             t : Mostrar arquivos acessados/usados
-**2*_h : Mostrar "hints"             c : Mostrar "conditionals"
-**2*_i : Mostrar informações gerais  d : Mostrar informações de depuração(debug)
-**2*_l : Mostrar números de linha    r : Modo de compatibilidade Rhide/GCCode
-**2*_a : Mostrar tudo                x : Informações do executável (Win32 apenas)
-**2*_v : grava fpcdebug.txt com      p : Grava tree.log com a árvore de parse
-**2*_    muitas informações de depuração
-3*1W<x>_opções do sistema operacional de destino no formato Win32
-3*2WB_Criar uma imagem relocável
-3*2WB<x>_Setar a base da imagem para o valor hexadecimal <x>
-3*2WC_Especifica aplicação tipo console
-3*2WD_Use DEFFILE para exportar functions de DLL ou EXE
-3*2WF_Especifica aplicação tipo tela cheia (apenas OS/2)
-3*2WG_Especifica aplicação gráfica
-3*2WN_Não gerar código relocável (necessário para depuração)
-3*2WR_Gerar código relocável
-P*2WC_Especifica aplicação tipo console (apenas MacOS)
-P*2WG_Especifica aplicação gráfica (apenas MacOS)
-P*2WT_Especifica aplicação do tipo ferramenta (ferramenta MPW, apenas MacOS)
-**1X_opções de executável:
-**2Xc_passar --shared ao linkage editor (apenas Unix)
-**2Xd_não usar caminho padrão de pesquisa em library (necessário para cross compile)
-**2XD_tentar link editar "units" dinâmicas(definir FPC_LINK_DYNAMIC)
-**2Xm_gerar mapa de link edição
-**2XM<x>_seta o nome da rotina principal do programa (default é 'main')
-**2XP<x>_prefixa os nomes dos binutils com o prefixo <x>
-**2Xr<x>_setar o caminho de pesquisa de libraries para <x> (necessário para cross compile)
-**2Xs_elimine todos os símbolos do executável
-**2XS_tente link editar as units como static (default) (definido com FPC_LINK_STATIC)
-**2Xt_link editar com static libraries (-static é passado ao linkage editor)
-**2XX_tente link editar as unidades com smart linking(definido com FPC_LINK_SMART)
-**1?_Mostra esta ajuda
-**1h_mostra esta ajuda sem espera
-]
-# End of help
-%%% scan_w_only_pack_records=02015_W_O alinhamento de campos de registro só pode ser em 1,2,4,8,16 or 32 bytes
-%%% scan_w_only_pack_enum=02016_W_Tipo enumerado pode ser salvo em apenas 1, 2 ou 4 bytes
-%%% parser_e_exit_with_argument_not_possible=03153_E_Não é possível usar "Exit" com argumento neste contexto
-%%% parser_e_only_publishable_classes_can_be_published=03156_E_Só podem ter atributo "published" classes compiladas com $M+
-%%% type_w_smaller_possible_range_check=04048_W_"Types" de tamanho diferente, haverá possível perda de dados e/ou "range check error"
-%%% mr_e_local_para_unreachable=07015_E_Não pode acessar a variável $1 direto deste código
-%%% asmr_e_size_suffix_and_dest_dont_match=07045_E_Sufixo de tamanho e o destino ou tamanho da origem não combinam
-%%% option_no_debug_support=11016_W_Este executável do compilador não suporta geração de informações de debug
-%%% scan_e_illegal_pack_records=02015_E_Illegal record alignment specifier "$1"
-% You are specifying the \var{\{\$PACKRECORDS n\} } or \var{\{\$ALIGN n\} }
-% with an illegal value for \var{n}. For \$PACKRECORDS valid alignments are 1, 2, 4, 8, 16, 32, C,
-% NORMAL, DEFAULT, and for \$ALIGN valid alignment are 1, 2, 4, 8, 16, 32, ON,
-% OFF. Under mode MacPas \$ALIGN also supports MAC68K, POWER and RESET.
-%%% scan_e_illegal_pack_enum=02016_E_Illegal enum minimum-size specifier "$1"
-% You are specifying the \var{\{\$PACKENUM n\}} with an illegal value for
-% \var{n}. Only 1,2,4, NORMAL or DEFAULT are valid here.
-%%% scan_e_compile_time_typeerror=02072_E_Compile time expression: Wanted $1 but got $2 at $3
-% Type check of a compile time expression failed.
-% \end{description}
-#
-# Parser
-#
-# 03192 is the last used one
-#
-% \section{Parser messages}
-% This section lists all parser messages. The parser takes care of the
-% semantics of you language, i.e. it determines if your pascal constructs
-% are correct.
-% \begin{description}
-%%% cg_f_unknown_compilerproc=06046_F_Unknown compilerproc "$1". Check if you use the correct run time library.
-% The compiler expects that the runtime library contains some subrountines. If you see this error
-% and you didn't mess with the runtime library, it's very likely that the runtime library
-% you're using doesn't match the used compiler. If you changed the runtime library this error means
-% that you removed a subroutine which the compiler needs for internal use.
-% \end{description}
-# EndOfTeX
-
-#
-# Assembler reader
-#
-# 07097 is the last used one
-#
-%%% exec_d_resbin_params=09028_D_Calling resource compiler "$1" with "$2" as command line
-%\end{description}
-# EndOfTeX
-
-#
-# Executable information
-#