* give an error when calling a virtual constructor from another constructor

    on the JVM target, because the generated code was invalid and I can't think
    of a generic way to solve it (see added comments in njvmcal.pas)

git-svn-id: branches/jvmbackend@19055 -

compiler/jvm/njvmcal.pas

@@ -51,6 +51,7 @@ interface
          function dispatch_procvar: tnode;
          procedure remove_hidden_paras;
         public
+         function pass_typecheck: tnode; override;
          function pass_1: tnode; override;
        end;
 
@@ -58,7 +59,7 @@ interface
 implementation
 
     uses
-      verbose,globtype,constexp,cutils,
+      verbose,globals,globtype,constexp,cutils,
       symconst,symtable,symsym,defutil,
       cgutils,tgobj,procinfo,htypechk,
       cpubase,aasmdata,aasmcpu,
@@ -454,6 +455,37 @@ implementation
     end;
 
 
+  function tjvmcallnode.pass_typecheck: tnode;
+    begin
+      result:=inherited pass_typecheck;
+      if assigned(result) or
+         codegenerror then
+        exit;
+      { unfortunately, we cannot handle a call to a virtual constructor for
+        the current instance from inside another constructor. The reason is
+        that these must be called via reflection, but before an instance has
+        been fully initialized (which can only be done by calling either an
+        inherited constructor or another constructor of this class) you can't
+        perform reflection.
+
+        Replacing virtual constructors with plain virtual methods that are
+        called after the instance has been initialized causes problems if they
+        in turn call plain constructors from inside the JDK (you cannot call
+        constructors anymore once the instance has been constructed). It also
+        causes problems regarding which other constructor to call then instead
+        before to initialize the instance (we could add dummy constructors for
+        that purpose to Pascal classes, but that scheme breaks when a class
+        inherits from a JDK class other than JLObject).
+      }
+      if (current_procinfo.procdef.proctypeoption=potype_constructor) and
+         not(cnf_inherited in callnodeflags) and
+         (procdefinition.proctypeoption=potype_constructor) and
+         (po_virtualmethod in procdefinition.procoptions) and
+         (cnf_member_call in callnodeflags) then
+        CGMessage(parser_e_jvm_invalid_virtual_constructor_call);
+    end;
+
+
   function tjvmcallnode.dispatch_procvar: tnode;
     var
       pdclass: tobjectdef;

compiler/msg/errore.msg

@@ -379,7 +379,7 @@ scanner_w_directive_ignored_on_target=02089_W_Directive "$1" is ignored for the
 #
 # Parser
 #
-# 03319 is the last used one
+# 03320 is the last used one
 #
 % \section{Parser messages}
 % This section lists all parser messages. The parser takes care of the
@@ -1426,6 +1426,11 @@ parser_d_internal_parser_string=03318_D_Parsing internally generated code: $1
 % with debugging errors in them.
 parser_e_feature_unsupported_for_vm=03319_E_This language feature is not supported on managed VM targets
 % Certain language features are not supported on targets that are managed virtual machines.
+parser_e_jvm_invalid_virtual_constructor_call=03320_E_Calling a virtual constructor for the current instance inside another constructor is not possible on the JVM target
+% The JVM does not natively support virtual constructor. Unforunately, we are not aware of a way to
+% emulate them in a way that makes it possible to support calling virtual constructors
+% for the current instance inside another constructor.
+%
 % \end{description}
 # Type Checking
 #

compiler/msgidx.inc

@@ -412,6 +412,7 @@ const
   parser_e_java_no_inherited_constructor=03317;
   parser_d_internal_parser_string=03318;
   parser_e_feature_unsupported_for_vm=03319;
+  parser_e_jvm_invalid_virtual_constructor_call=03320;
   type_e_mismatch=04000;
   type_e_incompatible_types=04001;
   type_e_not_equal_types=04002;
@@ -913,9 +914,9 @@ const
   option_info=11024;
   option_help_pages=11025;
 
-  MsgTxtSize = 62122;
+  MsgTxtSize = 62246;
 
   MsgIdxMax : array[1..20] of longint=(
-    26,90,320,107,87,54,111,23,202,63,
+    26,90,321,107,87,54,111,23,202,63,
     49,20,1,1,1,1,1,1,1,1
   );

compiler/msgtxt.inc

@@ -1,7 +1,7 @@
 {$ifdef Delphi}
-const msgtxt : array[0..000258] of string[240]=(
+const msgtxt : array[0..000259] of string[240]=(
 {$else Delphi}
-const msgtxt : array[0..000258,1..240] of char=(
+const msgtxt : array[0..000259,1..240] of char=(
 {$endif Delphi}
   '01000_T_Compiler: $1'#000+
   '01001_D_Compiler OS: $1'#000+
@@ -508,601 +508,602 @@ const msgtxt : array[0..000258,1..240] of char=(
   'citly add a constructor that calls the inherited one if yo','u need it'#000+
   '03318_D_Parsing internally generated code: $1'#000+
   '03319_E_This language feature is not supported on managed VM targets'#000+
+  '03320_E_Calling a virtual constructor for the current instance inside '+
+  'another constructor is not possible on the JV','M target'#000+
   '04000_E_Type mismatch'#000+
   '04001_E_Incompatible types: got "$1" expected "$2"'#000+
-  '04002_E_Type mismatch between "$1" and "$2','"'#000+
+  '04002_E_Type mismatch between "$1" and "$2"'#000+
   '04003_E_Type identifier expected'#000+
   '04004_E_Variable identifier expected'#000+
-  '04005_E_Integer expression expected, but got "$1"'#000+
+  '04005_E_Integer expression expected, but got',' "$1"'#000+
   '04006_E_Boolean expression expected, but got "$1"'#000+
   '04007_E_Ordinal expression expected'#000+
-  '04008_E_pointer type expected, b','ut got "$1"'#000+
+  '04008_E_pointer type expected, but got "$1"'#000+
   '04009_E_class type expected, but got "$1"'#000+
   '04011_E_Can'#039't evaluate constant expression'#000+
-  '04012_E_Set elements are not compatible'#000+
+  '04012_E_Set element','s are not compatible'#000+
   '04013_E_Operation not implemented for sets'#000+
-  '04014_W_Automatic type conversion from floating type to COMP',' which i'+
-  's an integer type'#000+
+  '04014_W_Automatic type conversion from floating type to COMP which is '+
+  'an integer type'#000+
   '04015_H_use DIV instead to get an integer result'#000+
-  '04016_E_String types have to match exactly in $V+ mode'#000+
+  '04016_E_String types have to match exactl','y in $V+ mode'#000+
   '04017_E_succ or pred on enums with assignments not possible'#000+
-  '04018_E_Can'#039't read or write variables of this type',#000+
+  '04018_E_Can'#039't read or write variables of this type'#000+
   '04019_E_Can'#039't use readln or writeln on typed file'#000+
   '04020_E_Can'#039't use read or write on untyped file.'#000+
-  '04021_E_Type conflict between set elements'#000+
+  '04021_E_Type con','flict between set elements'#000+
   '04022_W_lo/hi(dword/qword) returns the upper/lower word/dword'#000+
-  '04023_E_Integer or real expression ','expected'#000+
+  '04023_E_Integer or real expression expected'#000+
   '04024_E_Wrong type "$1" in array constructor'#000+
-  '04025_E_Incompatible type for arg no. $1: Got "$2", expected "$3"'#000+
+  '04025_E_Incompatible type for arg no. $1: Got "$2", expected "','$3"'#000+
   '04026_E_Method (variable) and Procedure (variable) are not compatible'#000+
-  '04027_E_Illegal constant passed to internal math f','unction'#000+
+  '04027_E_Illegal constant passed to internal math function'#000+
   '04028_E_Can'#039't take the address of constant expressions'#000+
   '04029_E_Argument can'#039't be assigned to'#000+
-  '04030_E_Can'#039't assign local procedure/function to procedure variabl'+
-  'e'#000+
+  '04030_E_Can'#039't a','ssign local procedure/function to procedure varia'+
+  'ble'#000+
   '04031_E_Can'#039't assign values to an address'#000+
-  '04032_E_Can'#039't assign values t','o const variable'#000+
+  '04032_E_Can'#039't assign values to const variable'#000+
   '04033_E_Array type required'#000+
   '04034_E_interface type expected, but got "$1"'#000+
-  '04035_H_Mixing signed expressions and longwords gives a 64bit result'#000+
+  '04035_H_Mixing signed exp','ressions and longwords gives a 64bit result'+
+  #000+
   '04036_W_Mixing signed expressions and cardinals here may cause a range'+
-  ' check err','or'#000+
+  ' check error'#000+
   '04037_E_Typecast has different size ($1 -> $2) in assignment'#000+
-  '04038_E_enums with assignments can'#039't be used as array index'#000+
+  '04038_E_enums with assignments can'#039't be used as arra','y index'#000+
   '04039_E_Class or Object types "$1" and "$2" are not related'#000+
   '04040_W_Class types "$1" and "$2" are not related'#000+
-  '04041_','E_Class or interface type expected, but got "$1"'#000+
+  '04041_E_Class or interface type expected, but got "$1"'#000+
   '04042_E_Type "$1" is not completely defined'#000+
-  '04043_W_String literal has more characters than short string length'#000+
+  '04043_W_String literal ','has more characters than short string length'#000+
   '04044_W_Comparison is always false due to range of values'#000+
-  '04045_W_Comparison is',' always true due to range of values'#000+
+  '04045_W_Comparison is always true due to range of values'#000+
   '04046_W_Constructing a class "$1" with abstract method "$2"'#000+
-  '04047_H_The left operand of the IN operator should be byte sized'#000+
+  '04047_H_The left ope','rand of the IN operator should be byte sized'#000+
   '04048_W_Type size mismatch, possible loss of data / range check error'#000+
-  '04049_H_T','ype size mismatch, possible loss of data / range check erro'+
-  'r'#000+
-  '04050_E_The address of an abstract method can'#039't be taken'#000+
+  '04049_H_Type size mismatch, possible loss of data / range check error'#000+
+  '04050_E_The address of an abstract method can'#039't be take','n'#000+
   '04051_E_Assignments to formal parameters and open arrays are not possi'+
   'ble'#000+
   '04052_E_Constant Expression expected'#000+
-  '04053_E_Ope','ration "$1" not supported for types "$2" and "$3"'#000+
+  '04053_E_Operation "$1" not supported for types "$2" and "$3"'#000+
   '04054_E_Illegal type conversion: "$1" to "$2"'#000+
-  '04055_H_Conversion between ordinals and pointers is not portable'#000+
+  '04055_H_Conversion b','etween ordinals and pointers is not portable'#000+
   '04056_W_Conversion between ordinals and pointers is not portable'#000+
-  '04057_E_Can'#039't ','determine which overloaded function to call'#000+
+  '04057_E_Can'#039't determine which overloaded function to call'#000+
   '04058_E_Illegal counter variable'#000+
-  '04059_W_Converting constant real value to double for C variable argume'+
-  'nt, add explicit typecast to prevent this.'#000+
-  '04060_E_Class or COM interface type expected, but ','got "$1"'#000+
+  '04059_W_Converting constant real value ','to double for C variable argu'+
+  'ment, add explicit typecast to prevent this.'#000+
+  '04060_E_Class or COM interface type expected, but got "$1"'#000+
   '04061_E_Constant packed arrays are not yet supported'#000+
-  '04062_E_Incompatible type for arg no. $1: Got "$2" expected "(Bit)Pack'+
-  'ed Array"'#000+
+  '04062_E_Incompatible type for arg no. $1: Got "$2" exp','ected "(Bit)Pa'+
+  'cked Array"'#000+
   '04063_E_Incompatible type for arg no. $1: Got "$2" expected "(not pack'+
   'ed) Array"'#000+
-  '04064_E_Elements ','of packed arrays cannot be of a type which need to '+
-  'be initialised'#000+
-  '04065_E_Constant packed records and objects are not yet supported'#000+
+  '04064_E_Elements of packed arrays cannot be of a type which need to be'+
+  ' initialised'#000+
+  '04065_E_Constant packed records and objects are no','t yet supported'#000+
   '04066_W_Arithmetic "$1" on untyped pointer is unportable to {$T+}, sug'+
   'gest typecast'#000+
-  '04076_E_Can'#039't take addre','ss of a subroutine marked as local'#000+
+  '04076_E_Can'#039't take address of a subroutine marked as local'#000+
   '04077_E_Can'#039't export subroutine marked as local from a unit'#000+
-  '04078_E_Type is not automatable: "$1"'#000+
+  '04078_E_Type is not a','utomatable: "$1"'#000+
   '04079_H_Converting the operands to "$1" before doing the add could pre'+
   'vent overflow errors.'#000+
-  '04080_H_Convert','ing the operands to "$1" before doing the subtract co'+
-  'uld prevent overflow errors.'#000+
-  '04081_H_Converting the operands to "$1" before doing the multiply coul'+
+  '04080_H_Converting the operands to "$1" before doing the subtract coul'+
   'd prevent overflow errors.'#000+
-  '04082_W_Converting pointers to signed integers may result in ','wrong c'+
-  'omparison results and range errors, use an unsigned type instead.'#000+
-  '04083_E_Interface type $1 has no valid GUID'#000+
+  '04081_H_Converting the operands to',' "$1" before doing the multiply co'+
+  'uld prevent overflow errors.'#000+
+  '04082_W_Converting pointers to signed integers may result in wrong com'+
+  'parison results and range errors, use an unsigned type instead.'#000+
+  '04083_E_Interface type $1 has no valid GUID',#000+
   '04084_E_Invalid selector name "$1"'#000+
   '04085_E_Expected Objective-C method, but got $1'#000+
-  '04086_E_Expected Objective-C method or c','onstant method name'#000+
+  '04086_E_Expected Objective-C method or constant method name'#000+
   '04087_E_No type info available for this type'#000+
   '04088_E_Ordinal or string expression expected'#000+
-  '04089_E_String expression expected'#000+
+  '04089','_E_String expression expected'#000+
   '04090_W_Converting 0 to NIL'#000+
   '04091_E_Objective-C protocol type expected, but got "$1"'#000+
-  '04092_E_T','he type "$1" is not supported for interaction with the Obje'+
-  'ctive-C runtime.'#000+
-  '04093_E_Class or objcclass type expected, but got "$1"'#000+
+  '04092_E_The type "$1" is not supported for interaction with the Object'+
+  'ive-C runtime.'#000+
+  '04093_E_Class or objcclass type expected',', but got "$1"'#000+
   '04094_E_Objcclass type expected'#000+
   '04095_W_Coerced univ parameter type in procedural variable may cause c'+
-  'rash or',' memory corruption: $1 to $2'#000+
+  'rash or memory corruption: $1 to $2'#000+
   '04096_E_Type parameters of specializations of generics cannot referenc'+
-  'e the currently specialized type'#000+
+  'e the currently s','pecialized type'#000+
   '04097_E_Type parameters are not allowed on non-generic class/record/ob'+
   'ject procedure or function'#000+
-  '04098_E_Gen','eric declaration of "$1" differs from previous declaratio'+
-  'n'#000+
+  '04098_E_Generic declaration of "$1" differs from previous declaration'#000+
   '04099_E_Helper type expected'#000+
-  '04100_E_Record type expected'#000+
+  '04100_E_Record type expected',#000+
   '04101_E_Derived class helper must extend a subclass of "$1" or the cla'+
   'ss itself'#000+
-  '04102_E_Derived record helper must extend "','$1"'#000+
+  '04102_E_Derived record helper must extend "$1"'#000+
   '04103_E_JVM virtual class methods cannot be static'#000+
-  '04104_E_Final (class) fields can only be assigned in their class'#039' '+
-  '(class) constructor'#000+
+  '04104_E_Final (class) fields can only be assigned in their cl','ass'#039+
+  ' (class) constructor'#000+
   '04105_E_It is not possible to typecast untyped parameters on managed p'+
-  'latforms, simply assign a val','ue to them instead.'#000+
+  'latforms, simply assign a value to them instead.'#000+
   '04106_E_The assignment side of an expression cannot be typecasted to a'+
-  ' supertype on managed platforms'#000+
+  ' supertype on managed plat','forms'#000+
   '05000_E_Identifier not found "$1"'#000+
   '05001_F_Internal Error in SymTableStack()'#000+
   '05002_E_Duplicate identifier "$1"'#000+
-  '05003_H_','Identifier already defined in $1 at line $2'#000+
+  '05003_H_Identifier already defined in $1 at line $2'#000+
   '05004_E_Unknown identifier "$1"'#000+
-  '05005_E_Forward declaration not solved "$1"'#000+
+  '05005_E_Forward declaration not solved "','$1"'#000+
   '05007_E_Error in type definition'#000+
   '05009_E_Forward type not resolved "$1"'#000+
-  '05010_E_Only static variables can be used in sta','tic methods or outsi'+
-  'de methods'#000+
+  '05010_E_Only static variables can be used in static methods or outside'+
+  ' methods'#000+
   '05012_F_record or class type expected'#000+
-  '05013_E_Instances of classes or objects with an abstract method are no'+
-  't allowed'#000+
+  '05013_E_Instances of classes or objects with an',' abstract method are '+
+  'not allowed'#000+
   '05014_W_Label not defined "$1"'#000+
   '05015_E_Label used but not defined "$1"'#000+
-  '05016_E_Illegal labe','l declaration'#000+
+  '05016_E_Illegal label declaration'#000+
   '05017_E_GOTO and LABEL are not supported (use switch -Sg)'#000+
   '05018_E_Label not found'#000+
-  '05019_E_identifier isn'#039't a label'#000+
+  '05019_E_identifier i','sn'#039't a label'#000+
   '05020_E_label already defined'#000+
   '05021_E_illegal type declaration of set elements'#000+
-  '05022_E_Forward class definition',' not resolved "$1"'#000+
+  '05022_E_Forward class definition not resolved "$1"'#000+
   '05023_H_Unit "$1" not used in $2'#000+
   '05024_H_Parameter "$1" not used'#000+
-  '05025_N_Local variable "$1" not used'#000+
+  '05025_N_Local variable "$1" not ','used'#000+
   '05026_H_Value parameter "$1" is assigned but never used'#000+
   '05027_N_Local variable "$1" is assigned but never used'#000+
-  '05028_H_','Local $1 "$2" is not used'#000+
+  '05028_H_Local $1 "$2" is not used'#000+
   '05029_N_Private field "$1.$2" is never used'#000+
-  '05030_N_Private field "$1.$2" is assigned but never used'#000+
+  '05030_N_Private field "$1.$2" is assigned but ','never used'#000+
   '05031_N_Private method "$1.$2" never used'#000+
   '05032_E_Set type expected'#000+
-  '05033_W_Function result does not seem to be s','et'#000+
+  '05033_W_Function result does not seem to be set'#000+
   '05034_W_Type "$1" is not aligned correctly in current record for C'#000+
   '05035_E_Unknown record field identifier "$1"'#000+
-  '05036_W_Local variable "$1" does not seem to be initialized'#000+
+  '0','5036_W_Local variable "$1" does not seem to be initialized'#000+
   '05037_W_Variable "$1" does not seem to be initialized'#000+
-  '05038_E_ide','ntifier idents no member "$1"'#000+
+  '05038_E_identifier idents no member "$1"'#000+
   '05039_H_Found declaration: $1'#000+
   '05040_E_Data element too large'#000+
-  '05042_E_No matching implementation for interface method "$1" found'#000+
+  '05042_E_No matching imple','mentation for interface method "$1" found'#000+
   '05043_W_Symbol "$1" is deprecated'#000+
   '05044_W_Symbol "$1" is not portable'#000+
-  '05055_W_Symb','ol "$1" is not implemented'#000+
+  '05055_W_Symbol "$1" is not implemented'#000+
   '05056_E_Can'#039't create unique type from this type'#000+
-  '05057_H_Local variable "$1" does not seem to be initialized'#000+
+  '05057_H_Local variable "$1" does not seem',' to be initialized'#000+
   '05058_H_Variable "$1" does not seem to be initialized'#000+
-  '05059_W_Function result variable does not seem to i','nitialized'#000+
+  '05059_W_Function result variable does not seem to initialized'#000+
   '05060_H_Function result variable does not seem to be initialized'#000+
-  '05061_W_Variable "$1" read but nowhere assigned'#000+
+  '05061_W_Variable "$1" read but nowhere a','ssigned'#000+
   '05062_H_Found abstract method: $1'#000+
   '05063_W_Symbol "$1" is experimental'#000+
-  '05064_W_Forward declaration "$1" not resolved,',' assumed external'#000+
+  '05064_W_Forward declaration "$1" not resolved, assumed external'#000+
   '05065_W_Symbol "$1" is belongs to a library'#000+
   '05066_W_Symbol "$1" is deprecated: "$2"'#000+
-  '05067_E_Cannot find an enumerator for the type "$1"'#000+
+  '05067_E_Cannot',' find an enumerator for the type "$1"'#000+
   '05068_E_Cannot find a "MoveNext" method in enumerator "$1"'#000+
-  '05069_E_Cannot find a "Curr','ent" property in enumerator "$1"'#000+
+  '05069_E_Cannot find a "Current" property in enumerator "$1"'#000+
   '05070_E_Mismatch between number of declared parameters and number of c'+
-  'olons in message string.'#000+
+  'olons in mess','age string.'#000+
   '05071_N_Private type "$1.$2" never used'#000+
   '05072_N_Private const "$1.$2" never used'#000+
-  '05073_N_Private property "$1.$2','" never used'#000+
+  '05073_N_Private property "$1.$2" never used'#000+
   '05074_W_Unit "$1" is deprecated'#000+
   '05075_W_Unit "$1" is deprecated: "$2"'#000+
-  '05076_W_Unit "$1" is not portable'#000+
+  '05076_W_Unit "$1" is not portable',#000+
   '05077_W_Unit "$1" is belongs to a library'#000+
   '05078_W_Unit "$1" is not implemented'#000+
   '05079_W_Unit "$1" is experimental'#000+
-  '05080_E_No',' complete definition of the formally declared class "$1" i'+
-  's in scope'#000+
-  '05081_E_Gotos into initialization or finalization blocks of units are '+
-  'not allowed'#000+
+  '05080_E_No complete definition of the formally declared class "$1" is '+
+  'in scope'#000+
+  '05081_E_Gotos into initialization or finalizati','on blocks of units ar'+
+  'e not allowed'#000+
   '05082_E_Invalid external name "$1" for formal class "$2"'#000+
-  '05083_E_Complete class definitio','n with external name "$1" here'#000+
+  '05083_E_Complete class definition with external name "$1" here'#000+
   '05084_W_Possible library conflict: symbol "$1" from library "$2" also '+
-  'found in library "$3"'#000+
+  'found in librar','y "$3"'#000+
   '05085_E_Cannot add implicit constructor '#039'Create'#039' because ident'+
   'ifier already used by "$1"'#000+
-  '05086_E_Cannot generate defa','ult constructor for class, because paren'+
-  't has no parameterless constructor'#000+
-  '06009_E_Parameter list size exceeds 65535 bytes'#000+
+  '05086_E_Cannot generate default constructor for class, because parent '+
+  'has no parameterless constructor'#000+
+  '06009_E_Parameter list size exceeds 65535',' bytes'#000+
   '06012_E_File types must be var parameters'#000+
   '06013_E_The use of a far pointer isn'#039't allowed there'#000+
-  '06015_E_EXPORT declare','d functions can'#039't be called'#000+
+  '06015_E_EXPORT declared functions can'#039't be called'#000+
   '06016_W_Possible illegal call of constructor or destructor'#000+
   '06017_N_Inefficient code'#000+
-  '06018_W_unreachable code'#000+
+  '0601','8_W_unreachable code'#000+
   '06020_E_Abstract methods can'#039't be called directly'#000+
   '06027_DL_Register $1 weight $2 $3'#000+
-  '06029_DL_Stack fram','e is omitted'#000+
+  '06029_DL_Stack frame is omitted'#000+
   '06031_E_Object or class methods can'#039't be inline.'#000+
   '06032_E_Procvar calls cannot be inline.'#000+
-  '06033_E_No code for inline procedure stored'#000+
+  '06033_E_No cod','e for inline procedure stored'#000+
   '06035_E_Element zero of an ansi/wide- or longstring can'#039't be acces'+
-  'sed, use (set)length instead',#000+
+  'sed, use (set)length instead'#000+
   '06037_E_Constructors or destructors cannot be called inside a '#039'wit'+
   'h'#039' clause'#000+
-  '06038_E_Cannot call message handler methods directly'#000+
+  '06038_E_Cannot call message handler met','hods directly'#000+
   '06039_E_Jump in or outside of an exception block'#000+
-  '06040_E_Control flow statements aren'#039't allowed in a finally b','loc'+
-  'k'#000+
+  '06040_E_Control flow statements aren'#039't allowed in a finally block'#000+
   '06041_W_Parameters size exceeds limit for certain cpu'#039's'#000+
-  '06042_W_Local variable size exceed limit for certain cpu'#039's'#000+
+  '06042_W_Local variable size exceed limit for certain cp','u'#039's'#000+
   '06043_E_Local variables size exceeds supported limit'#000+
   '06044_E_BREAK not allowed'#000+
   '06045_E_CONTINUE not allowed'#000+
-  '06046_F_Unkn','own compilerproc "$1". Check if you use the correct run '+
-  'time library.'#000+
-  '06047_F_Cannot find system type "$1". Check if you use the correct run'+
-  ' time library.'#000+
+  '06046_F_Unknown compilerproc "$1". Check if you use the correct run ti'+
+  'me library.'#000+
+  '06047_F_Cannot find system type "$1". Check if',' you use the correct r'+
+  'un time library.'#000+
   '06048_H_Inherited call to abstract method ignored'#000+
-  '06049_E_Goto label "$1" not defined',' or optimized away'#000+
+  '06049_E_Goto label "$1" not defined or optimized away'#000+
   '06050_F_Cannot find type "$1" in unit "$2". Check if you use the corre'+
   'ct run time library.'#000+
-  '06051_E_Interprocedural gotos are allowed only to outer subroutines'#000+
-  '06052_E_Label must be defined in the same scope as it is decla','red'#000+
+  '06051_','E_Interprocedural gotos are allowed only to outer subroutines'#000+
+  '06052_E_Label must be defined in the same scope as it is declared'#000+
   '06053_E_Leaving procedures containing explicit or implicit exceptions '+
   'frames using goto is not allowed'#000+
-  '07000_DL_Starting $1 styled assembler parsing'#000+
+  '07000_DL_','Starting $1 styled assembler parsing'#000+
   '07001_DL_Finished $1 styled assembler parsing'#000+
   '07002_E_Non-label pattern contains @'#000+
-  '0700','4_E_Error building record offset'#000+
+  '07004_E_Error building record offset'#000+
   '07005_E_OFFSET used without identifier'#000+
   '07006_E_TYPE used without identifier'#000+
-  '07007_E_Cannot use local variable or parameters here'#000+
+  '07007_E','_Cannot use local variable or parameters here'#000+
   '07008_E_need to use OFFSET here'#000+
   '07009_E_need to use $ here'#000+
-  '07010_E_Cannot use ','multiple relocatable symbols'#000+
+  '07010_E_Cannot use multiple relocatable symbols'#000+
   '07011_E_Relocatable symbol can only be added'#000+
   '07012_E_Invalid constant expression'#000+
-  '07013_E_Relocatable symbol is not allowed'#000+
+  '07013_','E_Relocatable symbol is not allowed'#000+
   '07014_E_Invalid reference syntax'#000+
   '07015_E_You cannot reach $1 from that code'#000+
-  '07016_E_Loca','l symbols/labels aren'#039't allowed as references'#000+
+  '07016_E_Local symbols/labels aren'#039't allowed as references'#000+
   '07017_E_Invalid base and index register usage'#000+
-  '07018_W_Possible error in object field handling'#000+
+  '07018_W_Possible error i','n object field handling'#000+
   '07019_E_Wrong scale factor specified'#000+
   '07020_E_Multiple index register usage'#000+
-  '07021_E_Invalid operand t','ype'#000+
+  '07021_E_Invalid operand type'#000+
   '07022_E_Invalid string as opcode operand: $1'#000+
   '07023_W_@CODE and @DATA not supported'#000+
-  '07024_E_Null label references are not allowed'#000+
+  '07024_E_Null label references',' are not allowed'#000+
   '07025_E_Divide by zero in asm evaluator'#000+
   '07026_E_Illegal expression'#000+
   '07027_E_escape sequence ignored: $1'#000+
-  '0702','8_E_Invalid symbol reference'#000+
+  '07028_E_Invalid symbol reference'#000+
   '07029_W_Fwait can cause emulation problems with emu387'#000+
-  '07030_W_$1 without operand translated into $1P'#000+
+  '07030_W_$1 without operand trans','lated into $1P'#000+
   '07031_W_ENTER instruction is not supported by Linux kernel'#000+
-  '07032_W_Calling an overload function in assembler'#000,
+  '07032_W_Calling an overload function in assembler'#000+
   '07033_E_Unsupported symbol type for operand'#000+
   '07034_E_Constant value out of bounds'#000+
-  '07035_E_Error converting decimal $1'#000+
+  '07035_E_Error converting decimal $1',#000+
   '07036_E_Error converting octal $1'#000+
   '07037_E_Error converting binary $1'#000+
   '07038_E_Error converting hexadecimal $1'#000+
-  '07039_H_$1 tra','nslated to $2'#000+
+  '07039_H_$1 translated to $2'#000+
   '07040_W_$1 is associated to an overloaded function'#000+
   '07041_E_Cannot use SELF outside a method'#000+
-  '07042_E_Cannot use OLDEBP outside a nested procedure'#000+
+  '07042_E_Ca','nnot use OLDEBP outside a nested procedure'#000+
   '07043_W_Procedures can'#039't return any value in asm code'#000+
   '07044_E_SEG not supported'#000+
-  '0','7045_E_Size suffix and destination or source size do not match'#000+
-  '07046_W_Size suffix and destination or source size do not match'#000+
+  '07045_E_Size suffix and destination or source size do not match'#000+
+  '07046_W_Size suffix and destination or source size do',' not match'#000+
   '07047_E_Assembler syntax error'#000+
   '07048_E_Invalid combination of opcode and operands'#000+
-  '07049_E_Assembler syntax error ','in operand'#000+
+  '07049_E_Assembler syntax error in operand'#000+
   '07050_E_Assembler syntax error in constant'#000+
   '07051_E_Invalid String expression'#000+
-  '07052_W_constant with symbol $1 for address which is not on a pointer'#000+
+  '07052_W_constant with symbol',' $1 for address which is not on a pointe'+
+  'r'#000+
   '07053_E_Unrecognized opcode $1'#000+
   '07054_E_Invalid or missing opcode'#000+
-  '07055_E_Invalid c','ombination of prefix and opcode: $1'#000+
+  '07055_E_Invalid combination of prefix and opcode: $1'#000+
   '07056_E_Invalid combination of override and opcode: $1'#000+
-  '07057_E_Too many operands on line'#000+
+  '07057_E_Too many operands',' on line'#000+
   '07058_W_NEAR ignored'#000+
   '07059_W_FAR ignored'#000+
   '07060_E_Duplicate local symbol $1'#000+
   '07061_E_Undefined local symbol $1'#000+
-  '07062_','E_Unknown label identifier $1'#000+
+  '07062_E_Unknown label identifier $1'#000+
   '07063_E_Invalid register name'#000+
   '07064_E_Invalid floating point register name'#000+
-  '07066_W_Modulo not supported'#000+
+  '07066_W_Mod','ulo not supported'#000+
   '07067_E_Invalid floating point constant $1'#000+
   '07068_E_Invalid floating point expression'#000+
-  '07069_E_Wrong symbol ','type'#000+
+  '07069_E_Wrong symbol type'#000+
   '07070_E_Cannot index a local var or parameter with a register'#000+
   '07071_E_Invalid segment override expression'#000+
-  '07072_W_Identifier $1 supposed external'#000+
+  '07072','_W_Identifier $1 supposed external'#000+
   '07073_E_Strings not allowed as constants'#000+
   '07074_E_No type of variable specified'#000+
-  '07075_E_as','sembler code not returned to text section'#000+
+  '07075_E_assembler code not returned to text section'#000+
   '07076_E_Not a directive or local symbol $1'#000+
-  '07077_E_Using a defined name as a local label'#000+
+  '07077_E_Using a defined name as',' a local label'#000+
   '07078_E_Dollar token is used without an identifier'#000+
   '07079_W_32bit constant created for address'#000+
-  '07080_N_.align ','is target specific, use .balign or .p2align'#000+
+  '07080_N_.align is target specific, use .balign or .p2align'#000+
   '07081_E_Can'#039't access fields directly for parameters'#000+
-  '07082_E_Can'#039't access fields of objects/classes directly'#000+
+  '07082_E_Can'#039't access',' fields of objects/classes directly'#000+
   '07083_E_No size specified and unable to determine the size of the oper'+
   'ands'#000+
-  '07084_E_Canno','t use RESULT in this function'#000+
+  '07084_E_Cannot use RESULT in this function'#000+
   '07086_W_"$1" without operand translated into "$1 %st,%st(1)"'#000+
-  '07087_W_"$1 %st(n)" translated into "$1 %st,%st(n)"'#000+
+  '07087_W_"$1 %st(n)" trans','lated into "$1 %st,%st(n)"'#000+
   '07088_W_"$1 %st(n)" translated into "$1 %st(n),%st"'#000+
   '07089_E_Char < not allowed here'#000+
-  '07090_E_Char ','> not allowed here'#000+
+  '07090_E_Char > not allowed here'#000+
   '07093_W_ALIGN not supported'#000+
   '07094_E_Inc and Dec cannot be together'#000+
-  '07095_E_Invalid reglist for movem'#000+
+  '07095_E_Invalid reglist for mo','vem'#000+
   '07096_E_Reglist invalid for opcode'#000+
   '07097_E_Higher cpu mode required ($1)'#000+
-  '07098_W_No size specified and unable to determi','ne the size of the op'+
-  'erands, using DWORD as default'#000+
+  '07098_W_No size specified and unable to determine the size of the oper'+
+  'ands, using DWORD as default'#000+
   '07099_E_Syntax error while trying to parse a shifter operand'#000+
-  '07100_E_Address of packed component is not at a byte boundary'#000+
-  '07101_W_No size specified and unable to determine the size of the',' op'+
-  'erands, using BYTE as default'#000+
+  '071','00_E_Address of packed component is not at a byte boundary'#000+
+  '07101_W_No size specified and unable to determine the size of the oper'+
+  'ands, using BYTE as default'#000+
   '07102_W_Use of +offset(%ebp) for parameters invalid here'#000+
-  '07103_W_Use of +offset(%ebp) is not compatible with regcall convention'+
-  #000+
+  '07103_W_Use of +offset(%eb','p) is not compatible with regcall conventi'+
+  'on'#000+
   '07104_W_Use of -offset(%ebp) is not recommended for local variable acc'+
   'ess'#000+
-  '07105','_W_Use of -offset(%esp), access may cause a crash or value may '+
-  'be lost'#000+
-  '07106_E_VMTOffset must be used in combination with a virtual method, a'+
-  'nd "$1" is not virtual'#000+
+  '07105_W_Use of -offset(%esp), access may cause a crash or value may be'+
+  ' lost'#000+
+  '07106_E_VMTOffset must be used in combination',' with a virtual method,'+
+  ' and "$1" is not virtual'#000+
   '07107_E_Generating PIC, but reference is not PIC-safe'#000+
-  '07108_E_All registers ','in a register set must be of the same kind and'+
-  ' width'#000+
+  '07108_E_All registers in a register set must be of the same kind and w'+
+  'idth'#000+
   '07109_E_A register set cannot be empty'#000+
-  '07110_W_@GOTPCREL is useless and potentially dangereous for local symb'+
-  'ols'#000+
+  '07110_W_@GOTPCREL is use','less and potentially dangereous for local sy'+
+  'mbols'#000+
   '08000_F_Too many assembler files'#000+
-  '08001_F_Selected assembler output not sup','ported'#000+
+  '08001_F_Selected assembler output not supported'#000+
   '08002_F_Comp not supported'#000+
   '08003_F_Direct not support for binary writers'#000+
-  '08004_E_Allocating of data is only allowed in bss section'#000+
+  '08004_E_Allocating of data is only a','llowed in bss section'#000+
   '08005_F_No binary writer selected'#000+
   '08006_E_Asm: Opcode $1 not in table'#000+
-  '08007_E_Asm: $1 invalid combinat','ion of opcode and operands'#000+
+  '08007_E_Asm: $1 invalid combination of opcode and operands'#000+
   '08008_E_Asm: 16 Bit references not supported'#000+
   '08009_E_Asm: Invalid effective address'#000+
-  '08010_E_Asm: Immediate or reference expected'#000+
+  '08010','_E_Asm: Immediate or reference expected'#000+
   '08011_E_Asm: $1 value exceeds bounds $2'#000+
   '08012_E_Asm: Short jump is out of range $1'#000+
-  '0','8013_E_Asm: Undefined label $1'#000+
+  '08013_E_Asm: Undefined label $1'#000+
   '08014_E_Asm: Comp type not supported for this target'#000+
-  '08015_E_Asm: Extended type not supported for this target'#000+
+  '08015_E_Asm: Extended type not s','upported for this target'#000+
   '08016_E_Asm: Duplicate label $1'#000+
   '08017_E_Asm: Redefined label $1'#000+
   '08018_E_Asm: First defined here'#000+
-  '080','19_E_Asm: Invalid register $1'#000+
+  '08019_E_Asm: Invalid register $1'#000+
   '08020_E_Asm: 16 or 32 Bit references not supported'#000+
-  '08021_E_Asm: 64 Bit operands not supported'#000+
+  '08021_E_Asm: 64 Bit operands not su','pported'#000+
   '08022_E_Asm: AH,BH,CH or DH cannot be used in an instruction requiring'+
   ' REX prefix'#000+
-  '09000_W_Source operating system re','defined'#000+
+  '09000_W_Source operating system redefined'#000+
   '09001_I_Assembling (pipe) $1'#000+
   '09002_E_Can'#039't create assembler file: $1'#000+
   '09003_E_Can'#039't create object file: $1'#000+
-  '09004_E_Can'#039't create archive file: $1'#000+
+  '09','004_E_Can'#039't create archive file: $1'#000+
   '09005_E_Assembler $1 not found, switching to external assembling'#000+
-  '09006_T_Using assembler',': $1'#000+
+  '09006_T_Using assembler: $1'#000+
   '09007_E_Error while assembling exitcode $1'#000+
   '09008_E_Can'#039't call the assembler, error $1 switching to external a'+
-  'ssembling'#000+
+  'ss','embling'#000+
   '09009_I_Assembling $1'#000+
   '09010_I_Assembling with smartlinking $1'#000+
   '09011_W_Object $1 not found, Linking may fail !'#000+
-  '09012_','W_Library $1 not found, Linking may fail !'#000+
+  '09012_W_Library $1 not found, Linking may fail !'#000+
   '09013_E_Error while linking'#000+
-  '09014_E_Can'#039't call the linker, switching to external linking'#000+
+  '09014_E_Can'#039't call the linker, switching to e','xternal linking'#000+
   '09015_I_Linking $1'#000+
   '09016_E_Util $1 not found, switching to external linking'#000+
   '09017_T_Using util $1'#000+
-  '09018_E_Cr','eation of Executables not supported'#000+
+  '09018_E_Creation of Executables not supported'#000+
   '09019_E_Creation of Dynamic/Shared Libraries not supported'#000+
-  '09020_I_Closing script $1'#000+
+  '09020_I_Closing scrip','t $1'#000+
   '09021_E_resource compiler "$1" not found, switching to external mode'#000+
   '09022_I_Compiling resource $1'#000+
-  '09023_T_unit $1 can'#039,'t be statically linked, switching to smart li'+
-  'nking'#000+
-  '09024_T_unit $1 can'#039't be smart linked, switching to static linking'+
-  #000+
+  '09023_T_unit $1 can'#039't be statically linked, switching to smart lin'+
+  'king'#000+
+  '09024_T_unit $1 can'#039't be smart linked, switching to static linkin',
+  'g'#000+
   '09025_T_unit $1 can'#039't be shared linked, switching to static linkin'+
   'g'#000+
   '09026_E_unit $1 can'#039't be smart or static linked'#000+
-  '09027_','E_unit $1 can'#039't be shared or static linked'#000+
+  '09027_E_unit $1 can'#039't be shared or static linked'#000+
   '09028_D_Calling resource compiler "$1" with "$2" as command line'#000+
-  '09029_E_Error while compiling resources'#000+
+  '09029_E_','Error while compiling resources'#000+
   '09030_E_Can'#039't call the resource compiler "$1", switching to extern'+
   'al mode'#000+
-  '09031_E_Can'#039't open',' resource file "$1"'#000+
+  '09031_E_Can'#039't open resource file "$1"'#000+
   '09032_E_Can'#039't write resource file "$1"'#000+
   '09128_F_Can'#039't post process executable $1'#000+
-  '09129_F_Can'#039't open executable $1'#000+
+  '09129_F_Can'#039't op','en executable $1'#000+
   '09130_X_Size of Code: $1 bytes'#000+
   '09131_X_Size of initialized data: $1 bytes'#000+
-  '09132_X_Size of uninitialized dat','a: $1 bytes'#000+
+  '09132_X_Size of uninitialized data: $1 bytes'#000+
   '09133_X_Stack space reserved: $1 bytes'#000+
   '09134_X_Stack space committed: $1 bytes'#000+
-  '09200_F_Executable image size is too big for $1 target.'#000+
+  '09200_F_Executable image ','size is too big for $1 target.'#000+
   '09201_W_Object file "$1" contains 32-bit absolute relocation to symbol'+
   ' "$2".'#000+
-  '10000_T_Unitsear','ch: $1'#000+
+  '10000_T_Unitsearch: $1'#000+
   '10001_T_PPU Loading $1'#000+
   '10002_U_PPU Name: $1'#000+
   '10003_U_PPU Flags: $1'#000+
   '10004_U_PPU Crc: $1'#000+
   '10005_U_PPU Time: $1'#000+
-  '10006_U_PPU File too short'#000+
+  '10','006_U_PPU File too short'#000+
   '10007_U_PPU Invalid Header (no PPU at the begin)'#000+
   '10008_U_PPU Invalid Version $1'#000+
-  '10009_U_PPU is comp','iled for another processor'#000+
+  '10009_U_PPU is compiled for another processor'#000+
   '10010_U_PPU is compiled for another target'#000+
   '10011_U_PPU Source: $1'#000+
   '10012_U_Writing $1'#000+
-  '10013_F_Can'#039't Write PPU-File'#000+
+  '1001','3_F_Can'#039't Write PPU-File'#000+
   '10014_F_Error reading PPU-File'#000+
   '10015_F_unexpected end of PPU-File'#000+
-  '10016_F_Invalid PPU-File entry: $','1'#000+
+  '10016_F_Invalid PPU-File entry: $1'#000+
   '10017_F_PPU Dbx count problem'#000+
   '10018_E_Illegal unit name: $1'#000+
   '10019_F_Too much units'#000+
-  '10020_F_Circular unit reference between $1 and $2'#000+
+  '10020_F_Circular unit reference',' between $1 and $2'#000+
   '10021_F_Can'#039't compile unit $1, no sources available'#000+
   '10022_F_Can'#039't find unit $1 used by $2'#000+
-  '10023_W_Unit $1',' was not found but $2 exists'#000+
+  '10023_W_Unit $1 was not found but $2 exists'#000+
   '10024_F_Unit $1 searched but $2 found'#000+
-  '10025_W_Compiling the system unit requires the -Us switch'#000+
+  '10025_W_Compiling the system unit requires the -U','s switch'#000+
   '10026_F_There were $1 errors compiling module, stopping'#000+
   '10027_U_Load from $1 ($2) unit $3'#000+
-  '10028_U_Recompiling $1, c','hecksum changed for $2'#000+
+  '10028_U_Recompiling $1, checksum changed for $2'#000+
   '10029_U_Recompiling $1, source found only'#000+
-  '10030_U_Recompiling unit, static lib is older than ppufile'#000+
+  '10030_U_Recompiling unit, static lib is older than ','ppufile'#000+
   '10031_U_Recompiling unit, shared lib is older than ppufile'#000+
-  '10032_U_Recompiling unit, obj and asm are older than ppuf','ile'#000+
+  '10032_U_Recompiling unit, obj and asm are older than ppufile'#000+
   '10033_U_Recompiling unit, obj is older than asm'#000+
   '10034_U_Parsing interface of $1'#000+
-  '10035_U_Parsing implementation of $1'#000+
+  '10035_U_Parsing implementation o','f $1'#000+
   '10036_U_Second load for unit $1'#000+
   '10037_U_PPU Check file $1 time $2'#000+
-  '10040_W_Can'#039't recompile unit $1, but found modifed in','clude files'+
-  #000+
+  '10040_W_Can'#039't recompile unit $1, but found modifed include files'#000+
   '10041_U_File $1 is newer than the one used for creating PPU file $2'#000+
-  '10042_U_Trying to use a unit which was compiled with a different FPU m'+
-  'ode'#000+
+  '10042_U_Trying to use a unit which w','as compiled with a different FPU'+
+  ' mode'#000+
   '10043_U_Loading interface units from $1'#000+
   '10044_U_Loading implementation units from $1'#000+
-  '1','0045_U_Interface CRC changed for unit $1'#000+
+  '10045_U_Interface CRC changed for unit $1'#000+
   '10046_U_Implementation CRC changed for unit $1'#000+
-  '10047_U_Finished compiling unit $1'#000+
+  '10047_U_Finished compiling u','nit $1'#000+
   '10048_U_Adding dependency: $1 depends on $2'#000+
   '10049_U_No reload, is caller: $1'#000+
-  '10050_U_No reload, already in second com','pile: $1'#000+
+  '10050_U_No reload, already in second compile: $1'#000+
   '10051_U_Flag for reload: $1'#000+
   '10052_U_Forced reloading'#000+
   '10053_U_Previous state of $1: $2'#000+
-  '10054_U_Already compiling $1, setting second compile'#000+
+  '10054_U_Already compi','ling $1, setting second compile'#000+
   '10055_U_Loading unit $1'#000+
   '10056_U_Finished loading unit $1'#000+
   '10057_U_Registering new unit $1'#000+
-  '100','58_U_Re-resolving unit $1'#000+
+  '10058_U_Re-resolving unit $1'#000+
   '10059_U_Skipping re-resolving unit $1, still loading used units'#000+
-  '10060_U_Unloading resource unit $1 (not needed)'#000+
+  '10060_U_Unloading resource',' unit $1 (not needed)'#000+
   '10061_E_Unit $1 was compiled using a different whole program optimizat'+
-  'ion feedback input ($2, $3); rec','ompile it without wpo or use the sam'+
-  'e wpo feedback input file for this compilation invocation'#000+
-  '10062_U_Indirect interface (objects/classes) CRC changed for unit $1'#000+
+  'ion feedback input ($2, $3); recompile it without wpo or use the same '+
+  'wpo feedback input file for this compilation invocation'#000+
+  '10062_U_Indirect inter','face (objects/classes) CRC changed for unit $1'+
+  #000+
   '11000_O_$1 [options] <inputfile> [options]'#000+
-  '11001_W_Only one source file suppo','rted, changing source file to comp'+
-  'ile from "$1" into "$2"'#000+
+  '11001_W_Only one source file supported, changing source file to compil'+
+  'e from "$1" into "$2"'#000+
   '11002_W_DEF file can be created only for OS/2'#000+
-  '11003_E_nested response files are not supported'#000+
+  '11003_E_nest','ed response files are not supported'#000+
   '11004_F_No source file name in command line'#000+
   '11005_N_No option inside $1 config file'#000+
-  '1100','6_E_Illegal parameter: $1'#000+
+  '11006_E_Illegal parameter: $1'#000+
   '11007_H_-? writes help pages'#000+
   '11008_F_Too many config files nested'#000+
-  '11009_F_Unable to open file $1'#000+
+  '11009_F_Unable to open f','ile $1'#000+
   '11010_D_Reading further options from $1'#000+
   '11011_W_Target is already set to: $1'#000+
-  '11012_W_Shared libs not supported on DOS',' platform, reverting to stat'+
-  'ic'#000+
+  '11012_W_Shared libs not supported on DOS platform, reverting to static'+
+  #000+
   '11013_F_In options file $1 at line $2 too many \var{\#IF(N)DEFs} encou'+
   'ntered'#000+
-  '11014_F_In options file $1 at line $2 unexpected \var{\#ENDIFs} encoun'+
-  'tered'#000+
-  '11015_F_Open conditional at the end of the options file'#000,
+  '11014_F_','In options file $1 at line $2 unexpected \var{\#ENDIFs} enco'+
+  'untered'#000+
+  '11015_F_Open conditional at the end of the options file'#000+
   '11016_W_Debug information generation is not supported by this executab'+
   'le'#000+
   '11017_H_Try recompiling with -dGDB'#000+
-  '11018_W_You are using the obsolete switch $1'#000+
+  '11018_W_','You are using the obsolete switch $1'#000+
   '11019_W_You are using the obsolete switch $1, please use $2'#000+
-  '11020_N_Switching assembler',' to default source writing assembler'#000+
+  '11020_N_Switching assembler to default source writing assembler'#000+
   '11021_W_Assembler output selected "$1" is not compatible with "$2"'#000+
-  '11022_W_"$1" assembler use forced'#000+
+  '11022_W_"$1"',' assembler use forced'#000+
   '11026_T_Reading options from file $1'#000+
   '11027_T_Reading options from environment $1'#000+
-  '11028_D_Handling opti','on "$1"'#000+
+  '11028_D_Handling option "$1"'#000+
   '11029_O_*** press enter ***'#000+
   '11030_H_Start of reading config file $1'#000+
   '11031_H_End of reading config file $1'#000+
-  '11032_D_interpreting option "$1"'#000+
+  '11','032_D_interpreting option "$1"'#000+
   '11036_D_interpreting firstpass option "$1"'#000+
   '11033_D_interpreting file option "$1"'#000+
-  '11034_D_Read','ing config file "$1"'#000+
+  '11034_D_Reading config file "$1"'#000+
   '11035_D_found source file name "$1"'#000+
   '11039_E_Unknown code page'#000+
-  '11040_F_Config file $1 is a directory'#000+
+  '11040_F_Config file $1 is a direc','tory'#000+
   '11041_W_Assembler output selected "$1" cannot generate debug info, deb'+
   'ugging disabled'#000+
-  '11042_W_Use of ppc386.cfg is depr','ecated, please use fpc.cfg instead'#000+
+  '11042_W_Use of ppc386.cfg is deprecated, please use fpc.cfg instead'#000+
   '11043_F_In options file $1 at line $2 \var{\#ELSE} directive without \'+
-  'var{\#IF(N)DEF} found'#000+
+  'var{\#IF(N)','DEF} found'#000+
   '11044_F_Option "$1" is not, or not yet, supported on the current targe'+
   't platform'#000+
-  '11045_F_The feature "$1" is not,',' or not yet, supported on the select'+
-  'ed target platform'#000+
-  '11046_N_DWARF debug information cannot be used with smart linking on t'+
-  'his target, switching to static linking'#000+
+  '11045_F_The feature "$1" is not, or not yet, supported on the selected'+
+  ' target platform'#000+
+  '11046_N_DWARF debug information cannot be used with smart lin','king on'+
+  ' this target, switching to static linking'#000+
   '11047_W_Option "$1" is ignored for the current target platform.'#000+
-  '11048_W_Dis','abling external debug information because it is unsupport'+
-  'ed for the selected target/debug format combination.'#000+
-  '12000_F_Cannot open whole program optimization feedback file "$1"'#000+
-  '12001_D_Processing whole program optimization information in wpo',' fee'+
-  'dback file "$1"'#000+
+  '11048_W_Disabling external debug information because it is unsupported'+
+  ' for the selected target/debug format combination.'#000+
+  '12000_','F_Cannot open whole program optimization feedback file "$1"'#000+
+  '12001_D_Processing whole program optimization information in wpo feedb'+
+  'ack file "$1"'#000+
   '12002_D_Finished processing the whole program optimization information'+
-  ' in wpo feedback file "$1"'#000+
+  ' in wpo feedback file "$1"',#000+
   '12003_E_Expected section header, but got "$2" at line $1 of wpo feedba'+
   'ck file'#000+
-  '12004_W_No handler registered for whole progr','am optimization section'+
-  ' "$2" at line $1 of wpo feedback file, ignoring'#000+
-  '12005_D_Found whole program optimization section "$1" with information'+
-  ' about "$2"'#000+
+  '12004_W_No handler registered for whole program optimization section "'+
+  '$2" at line $1 of wpo feedback file, ignoring'#000+
+  '12005_D_Found whole program optimization sect','ion "$1" with informati'+
+  'on about "$2"'#000+
   '12006_F_The selected whole program optimizations require a previously '+
-  'generated feedbac','k file (use -Fw to specify)'#000+
+  'generated feedback file (use -Fw to specify)'#000+
   '12007_E_No collected information necessary to perform "$1" whole progr'+
-  'am optimization found'#000+
+  'am optimization fo','und'#000+
   '12008_F_Specify a whole program optimization feedback file to store th'+
   'e generated info in (using -FW)'#000+
-  '12009_E_Not genera','ting any whole program optimization information, y'+
-  'et a feedback file was specified (using -FW)'#000+
-  '12010_E_Not performing any whole program optimizations, yet an input f'+
-  'eedback file was specified (using -Fw)'#000+
-  '12011_D_Skipping whole program optim','ization section "$1", because no'+
-  't needed by the requested optimizations'#000+
-  '12012_W_Overriding previously read information for "$1" from feedback '+
-  'input file using information in section "$2"'#000+
-  '12013_E_Cannot extract symbol liveness information fr','om program when'+
-  ' stripping symbols, use -Xs-'#000+
+  '12009_E_Not generating any whole program optimization information, yet'+
+  ' a feedback file was specified (using -FW)'#000+
+  '12010_E_Not performin','g any whole program optimizations, yet an input'+
+  ' feedback file was specified (using -Fw)'#000+
+  '12011_D_Skipping whole program optimization section "$1", because not '+
+  'needed by the requested optimizations'#000+
+  '12012_W_Overriding previously read informati','on for "$1" from feedbac'+
+  'k input file using information in section "$2"'#000+
+  '12013_E_Cannot extract symbol liveness information from program when s'+
+  'tripping symbols, use -Xs-'#000+
   '12014_E_Cannot extract symbol liveness information from program when w'+
-  'hen not linking'#000+
+  'he','n not linking'#000+
   '12015_F_Cannot find "$1" or "$2" to extract symbol liveness informatio'+
   'n from linked program'#000+
-  '12016_E_Error duri','ng reading symbol liveness information produced by'+
-  ' "$1"'#000+
-  '12017_F_Error executing "$1" (exitcode: $2) to extract symbol informat'+
-  'ion from linked program'#000+
+  '12016_E_Error during reading symbol liveness information produced by "'+
+  '$1"'#000+
+  '12017_F_Error executing "$1" (exitcode: $2) to extract symbo','l inform'+
+  'ation from linked program'#000+
   '12018_E_Collection of symbol liveness information can only help when u'+
-  'sing smart linking, ','use -CX -XX'#000+
+  'sing smart linking, use -CX -XX'#000+
   '12019_E_Cannot create specified whole program optimisation feedback fi'+
   'le "$1"'#000+
-  '11023_Free Pascal Compiler version $FPCFULLVERSION [$FPCDATE] for $FPC'+
-  'CPU'#010+
+  '11023_Free Pascal Compiler',' version $FPCFULLVERSION [$FPCDATE] for $F'+
+  'PCCPU'#010+
   'Copyright (c) 1993-2011 by Florian Klaempfl and others'#000+
-  '11024_Free Pascal Com','piler version $FPCVERSION'#010+
+  '11024_Free Pascal Compiler version $FPCVERSION'#010+
   #010+
   'Compiler Date      : $FPCDATE'#010+
   'Compiler CPU Target: $FPCCPU'#010+
   #010+
   'Supported targets:'#010+
-  '  $OSTARGETS'#010+
+  '  $OSTARGE','TS'#010+
   #010+
   'Supported CPU instruction sets:'#010+
   '  $INSTRUCTIONSETS'#010+
@@ -1110,7 +1111,7 @@ const msgtxt : array[0..000258,1..240] of char=(
   'Supported FPU instruction sets:'#010+
   '  $FPUINSTRUCTIONSETS'#010+
   #010+
-  'Supported ABI',' targets:'#010+
+  'Supported ABI targets:'#010+
   '  $ABITARGETS'#010+
   #010+
   'Supported Optimizations:'#010+
@@ -1118,333 +1119,332 @@ const msgtxt : array[0..000258,1..240] of char=(
   #010+
   'Supported Whole Program Optimizations:'#010+
   '  All'#010+
-  '  $WPOPTIMIZATIONS'#010+
+  '  $','WPOPTIMIZATIONS'#010+
   #010+
   'Supported Microcontroller types:'#010+
   '  $CONTROLLERTYPES'#010+
   #010+
-  'This program comes under the GNU General Public Licenc','e'#010+
+  'This program comes under the GNU General Public Licence'#010+
   'For more information read COPYING.FPC'#010+
   #010+
   'Report bugs, suggestions, etc. to:'#010+
-  '                 http://bugs.freepascal.org'#010+
+  '                 http://bugs.freepascal.','org'#010+
   'or'#010+
   '                 [email protected]'#000+
   '11025_**0*_Put + after a boolean switch option to enable it, - to disa'+
   'ble it'#010+
-  '**1','a_The compiler doesn'#039't delete the generated assembler file'#010+
+  '**1a_The compiler doesn'#039't delete the generated assembler file'#010+
   '**2al_List sourcecode lines in assembler file'#010+
-  '**2an_List node info in assembler file'#010+
+  '**2an_List ','node info in assembler file'#010+
   '*L2ap_Use pipes instead of creating temporary assembler files'#010+
-  '**2ar_List register allocation/rel','ease info in assembler file'#010+
+  '**2ar_List register allocation/release info in assembler file'#010+
   '**2at_List temp allocation/release info in assembler file'#010+
   '**1A<x>_Output format:'#010+
-  '**2Adefault_Use default assembler'#010+
+  '**2Adef','ault_Use default assembler'#010+
   '3*2Aas_Assemble using GNU AS'#010+
   '3*2Amacho_Mach-O (Darwin, Intel 32 bit) using internal writer'#010+
-  '3*2Ana','smcoff_COFF (Go32v2) file using Nasm'#010+
+  '3*2Anasmcoff_COFF (Go32v2) file using Nasm'#010+
   '3*2Anasmelf_ELF32 (Linux) file using Nasm'#010+
-  '3*2Anasmwin32_Win32 object file using Nasm'#010+
+  '3*2Anasmwin32_Win32 object file using',' Nasm'#010+
   '3*2Anasmwdosx_Win32/WDOSX object file using Nasm'#010+
   '3*2Awasm_Obj file using Wasm (Watcom)'#010+
-  '3*2Anasmobj_Obj file using Nasm',#010+
+  '3*2Anasmobj_Obj file using Nasm'#010+
   '3*2Amasm_Obj file using Masm (Microsoft)'#010+
   '3*2Atasm_Obj file using Tasm (Borland)'#010+
-  '3*2Aelf_ELF (Linux) using internal writer'#010+
+  '3*2Aelf_ELF (Linux) using internal ','writer'#010+
   '3*2Acoff_COFF (Go32v2) using internal writer'#010+
   '3*2Apecoff_PE-COFF (Win32) using internal writer'#010+
-  '4*2Aas_Assemble using G','NU AS'#010+
+  '4*2Aas_Assemble using GNU AS'#010+
   '4*2Agas_Assemble using GNU GAS'#010+
   '4*2Agas-darwin_Assemble darwin Mach-O64 using GNU GAS'#010+
-  '4*2Amasm_Win64 object file using ml64 (Microsoft)'#010+
+  '4*2Amasm_Win64 object fil','e using ml64 (Microsoft)'#010+
   '4*2Apecoff_PE-COFF (Win64) using internal writer'#010+
   '4*2Aelf_ELF (Linux-64bit) using internal writer'#010+
-  '6*','2Aas_Unix o-file using GNU AS'#010+
+  '6*2Aas_Unix o-file using GNU AS'#010+
   '6*2Agas_GNU Motorola assembler'#010+
   '6*2Amit_MIT Syntax (old GAS)'#010+
-  '6*2Amot_Standard Motorola assembler'#010+
+  '6*2Amot_Standard Motorola ','assembler'#010+
   'A*2Aas_Assemble using GNU AS'#010+
   'P*2Aas_Assemble using GNU AS'#010+
   'S*2Aas_Assemble using GNU AS'#010+
-  '**1b_Generate browser info'#010,
+  '**1b_Generate browser info'#010+
   '**2bl_Generate local symbol info'#010+
   '**1B_Build all modules'#010+
   '**1C<x>_Code generation options:'#010+
-  '**2C3<x>_Turn on ieee error checking for constants'#010+
+  '**2C3<x>_Turn on ieee error',' checking for constants'#010+
   '**2Ca<x>_Select ABI, see fpc -i for possible values'#010+
   '**2Cb_Generate big-endian code'#010+
-  '**2Cc<x>_Set defa','ult calling convention to <x>'#010+
+  '**2Cc<x>_Set default calling convention to <x>'#010+
   '**2CD_Create also dynamic library (not supported)'#010+
-  '**2Ce_Compilation with emulated floating point opcodes'#010+
+  '**2Ce_Compilation with emulated floa','ting point opcodes'#010+
   '**2Cf<x>_Select fpu instruction set to use, see fpc -i for possible va'+
   'lues'#010+
-  '**2CF<x>_Minimal floating poin','t constant precision (default, 32, 64)'+
-  #010+
+  '**2CF<x>_Minimal floating point constant precision (default, 32, 64)'#010+
   '**2Cg_Generate PIC code'#010+
   '**2Ch<n>_<n> bytes heap (between 1023 and 67107840)'#010+
-  '**2Ci_IO-checking'#010+
+  '*','*2Ci_IO-checking'#010+
   '**2Cn_Omit linking stage'#010+
   '**2Co_Check overflow of integer operations'#010+
-  '**2CO_Check for possible overflow of in','teger operations'#010+
+  '**2CO_Check for possible overflow of integer operations'#010+
   '**2Cp<x>_Select instruction set, see fpc -i for possible values'#010+
   '**2CP<x>=<y>_ packing settings'#010+
-  '**3CPPACKSET=<y>_ <y> set allocation: 0, 1 or DEFAULT or NORMAL, 2, 4 '+
-  'and 8'#010+
+  '**3C','PPACKSET=<y>_ <y> set allocation: 0, 1 or DEFAULT or NORMAL, 2, '+
+  '4 and 8'#010+
   '**2Cr_Range checking'#010+
-  '**2CR_Verify object method call',' validity'#010+
+  '**2CR_Verify object method call validity'#010+
   '**2Cs<n>_Set stack checking size to <n>'#010+
   '**2Ct_Stack checking (for testing only, see manual)'#010+
-  '**2CX_Create also smartlinked library'#010+
+  '**2CX_Create a','lso smartlinked library'#010+
   '**1d<x>_Defines the symbol <x>'#010+
   '**1D_Generate a DEF file'#010+
   '**2Dd<x>_Set description to <x>'#010+
-  '**2Dv<x>_Set',' DLL version to <x>'#010+
+  '**2Dv<x>_Set DLL version to <x>'#010+
   '*O2Dw_PM application'#010+
   '**1e<x>_Set path to executable'#010+
   '**1E_Same as -Cn'#010+
   '**1fPIC_Same as -Cg'#010+
-  '**1F<x>_Set file names and paths:'#010+
+  '**1F<x>','_Set file names and paths:'#010+
   '**2Fa<x>[,y]_(for a program) load units <x> and [y] before uses is par'+
   'sed'#010+
-  '**2Fc<x>_Set input code','page to <x>'#010+
+  '**2Fc<x>_Set input codepage to <x>'#010+
   '**2FC<x>_Set RC compiler binary name to <x>'#010+
   '**2Fd_Disable the compiler'#039's internal directory cache'#010+
-  '**2FD<x>_Set the directory where to search for compiler utilities'#010+
+  '**2FD<','x>_Set the directory where to search for compiler utilities'#010+
   '**2Fe<x>_Redirect error output to <x>'#010+
-  '**2Ff<x>_Add <x> to framew','ork path (Darwin only)'#010+
+  '**2Ff<x>_Add <x> to framework path (Darwin only)'#010+
   '**2FE<x>_Set exe/unit output path to <x>'#010+
   '**2Fi<x>_Add <x> to include path'#010+
-  '**2Fl<x>_Add <x> to library path'#010+
+  '**2Fl<x>_Add <x> to',' library path'#010+
   '**2FL<x>_Use <x> as dynamic linker'#010+
   '**2Fm<x>_Load unicode conversion table from <x>.txt in the compiler di'+
   'r'#010+
-  '**2','Fo<x>_Add <x> to object path'#010+
+  '**2Fo<x>_Add <x> to object path'#010+
   '**2Fr<x>_Load error message file <x>'#010+
   '**2FR<x>_Set resource (.res) linker to <x>'#010+
-  '**2Fu<x>_Add <x> to unit path'#010+
+  '**2Fu<x','>_Add <x> to unit path'#010+
   '**2FU<x>_Set unit output path to <x>, overrides -FE'#010+
-  '**2FW<x>_Store generated whole-program optimizati','on feedback in <x>'#010+
+  '**2FW<x>_Store generated whole-program optimization feedback in <x>'#010+
   '**2Fw<x>_Load previously stored whole-program optimization feedback fr'+
   'om <x>'#010+
-  '*g1g_Generate debug information (default format for target)'#010+
+  '*g1g_Generate debug ','information (default format for target)'#010+
   '*g2gc_Generate checks for pointers'#010+
-  '*g2gh_Use heaptrace unit (for memory leak/corrupt','ion debugging)'#010+
+  '*g2gh_Use heaptrace unit (for memory leak/corruption debugging)'#010+
   '*g2gl_Use line info unit (show more info with backtraces)'#010+
   '*g2go<x>_Set debug information options'#010+
-  '*g3godwarfsets_ Enable DWARF '#039'set'#039' type debug information (bre'+
-  'aks gdb < 6.5)'#010+
-  '*g3gostabsabsincludes_ Store absolute/full include ','file paths in Sta'+
-  'bs'#010+
+  '*g3g','odwarfsets_ Enable DWARF '#039'set'#039' type debug information (b'+
+  'reaks gdb < 6.5)'#010+
+  '*g3gostabsabsincludes_ Store absolute/full include file paths in Stabs'+
+  #010+
   '*g3godwarfmethodclassprefix_ Prefix method names in DWARF with class n'+
   'ame'#010+
-  '*g2gp_Preserve case in stabs symbol names'#010+
+  '*g2gp_Preserve case in',' stabs symbol names'#010+
   '*g2gs_Generate Stabs debug information'#010+
   '*g2gt_Trash local variables (to detect uninitialized uses)'#010+
-  '*g2gv_','Generates programs traceable with Valgrind'#010+
+  '*g2gv_Generates programs traceable with Valgrind'#010+
   '*g2gw_Generate DWARFv2 debug information (same as -gw2)'#010+
-  '*g2gw2_Generate DWARFv2 debug information'#010+
+  '*g2gw2_Generate D','WARFv2 debug information'#010+
   '*g2gw3_Generate DWARFv3 debug information'#010+
-  '*g2gw4_Generate DWARFv4 debug information (experimental)'#010,
+  '*g2gw4_Generate DWARFv4 debug information (experimental)'#010+
   '**1i_Information'#010+
   '**2iD_Return compiler date'#010+
   '**2iV_Return short compiler version'#010+
   '**2iW_Return full compiler version'#010+
-  '**2iSO_Return compiler OS'#010+
+  '*','*2iSO_Return compiler OS'#010+
   '**2iSP_Return compiler host processor'#010+
   '**2iTO_Return target OS'#010+
   '**2iTP_Return target processor'#010+
-  '**1I<x','>_Add <x> to include path'#010+
+  '**1I<x>_Add <x> to include path'#010+
   '**1k<x>_Pass <x> to the linker'#010+
   '**1l_Write logo'#010+
   '**1M<x>_Set language mode to <x>'#010+
-  '**2Mfpc_Free Pascal dialect (default)'#010+
+  '**2Mfpc_Fr','ee Pascal dialect (default)'#010+
   '**2Mobjfpc_FPC mode with Object Pascal support'#010+
   '**2Mdelphi_Delphi 7 compatibility mode'#010+
-  '**2Mtp_TP/','BP 7.0 compatibility mode'#010+
+  '**2Mtp_TP/BP 7.0 compatibility mode'#010+
   '**2Mmacpas_Macintosh Pascal dialects compatibility mode'#010+
-  '**1n_Do not read the default config files'#010+
+  '**1n_Do not read the default confi','g files'#010+
   '**1N<x>_Node tree optimizations'#010+
   '**2Nu_Unroll loops'#010+
   '**1o<x>_Change the name of the executable produced to <x>'#010+
-  '**1O<x>','_Optimizations:'#010+
+  '**1O<x>_Optimizations:'#010+
   '**2O-_Disable optimizations'#010+
   '**2O1_Level 1 optimizations (quick and debugger friendly)'#010+
-  '**2O2_Level 2 optimizations (-O1 + quick optimizations)'#010+
+  '**2O2_Level 2 ','optimizations (-O1 + quick optimizations)'#010+
   '**2O3_Level 3 optimizations (-O2 + slow optimizations)'#010+
-  '**2Oa<x>=<y>_Set alignment'#010,
+  '**2Oa<x>=<y>_Set alignment'#010+
   '**2Oo[NO]<x>_Enable or disable optimizations, see fpc -i for possible '+
   'values'#010+
-  '**2Op<x>_Set target cpu for optimizing, see fpc -i for possible values'+
-  #010+
+  '**2Op<x>_Set target cpu for optimizing,',' see fpc -i for possible valu'+
+  'es'#010+
   '**2OW<x>_Generate whole-program optimization feedback for optimization'+
-  ' <x>, see fpc -i for p','ossible values'#010+
+  ' <x>, see fpc -i for possible values'#010+
   '**2Ow<x>_Perform whole-program optimization <x>, see fpc -i for possib'+
   'le values'#010+
-  '**2Os_Optimize for size rather than speed'#010+
+  '**2Os_Optimize for si','ze rather than speed'#010+
   '**1pg_Generate profile code for gprof (defines FPC_PROFILE)'#010+
   '**1R<x>_Assembler reading style:'#010+
-  '**2Rdefaul','t_Use default assembler for target'#010+
+  '**2Rdefault_Use default assembler for target'#010+
   '3*2Ratt_Read AT&T style assembler'#010+
   '3*2Rintel_Read Intel style assembler'#010+
-  '6*2RMOT_Read motorola style assembler'#010+
+  '6*2RMOT_Re','ad motorola style assembler'#010+
   '**1S<x>_Syntax options:'#010+
   '**2S2_Same as -Mobjfpc'#010+
-  '**2Sc_Support operators like C (*=,+=,/= and -=)'#010,
+  '**2Sc_Support operators like C (*=,+=,/= and -=)'#010+
   '**2Sa_Turn on assertions'#010+
   '**2Sd_Same as -Mdelphi'#010+
   '**2Se<x>_Error options. <x> is a combination of the following:'#010+
-  '**3*_<n> : Compiler halts after the <n> errors (default is 1)'#010+
+  '**3*_','<n> : Compiler halts after the <n> errors (default is 1)'#010+
   '**3*_w : Compiler also halts after warnings'#010+
-  '**3*_n : Compiler also ','halts after notes'#010+
+  '**3*_n : Compiler also halts after notes'#010+
   '**3*_h : Compiler also halts after hints'#010+
-  '**2Sg_Enable LABEL and GOTO (default in -Mtp and -Mdelphi)'#010+
+  '**2Sg_Enable LABEL and GOTO (default in -Mtp and -Mdelphi',')'#010+
   '**2Sh_Use reference counted strings (ansistring by default) instead of'+
   ' shortstrings'#010+
-  '**2Si_Turn on inlining of procedures/f','unctions declared as "inline"'#010+
+  '**2Si_Turn on inlining of procedures/functions declared as "inline"'#010+
   '**2Sk_Load fpcylix unit'#010+
   '**2SI<x>_Set interface style to <x>'#010+
-  '**3SIcom_COM compatible interface (default)'#010+
+  '**3SIcom_COM compatible in','terface (default)'#010+
   '**3SIcorba_CORBA compatible interface'#010+
   '**2Sm_Support macros like C (global)'#010+
   '**2So_Same as -Mtp'#010+
-  '**2Ss_Constr','uctor name must be init (destructor must be done)'#010+
+  '**2Ss_Constructor name must be init (destructor must be done)'#010+
   '**2Sx_Enable exception keywords (default in Delphi/ObjFPC modes)'#010+
-  '**2Sy_@<pointer> returns a typed pointer, same as $T+'#010+
+  '*','*2Sy_@<pointer> returns a typed pointer, same as $T+'#010+
   '**1s_Do not call assembler and linker'#010+
-  '**2sh_Generate script to link on ','host'#010+
+  '**2sh_Generate script to link on host'#010+
   '**2st_Generate script to link on target'#010+
   '**2sr_Skip register allocation phase (use with -alr)'#010+
-  '**1T<x>_Target operating system:'#010+
+  '**1T<x>_Target ope','rating system:'#010+
   '3*2Tdarwin_Darwin/Mac OS X'#010+
   '3*2Temx_OS/2 via EMX (including EMX/RSX extender)'#010+
   '3*2Tfreebsd_FreeBSD'#010+
-  '3*2Tgo32v2_V','ersion 2 of DJ Delorie DOS extender'#010+
+  '3*2Tgo32v2_Version 2 of DJ Delorie DOS extender'#010+
   '3*2Tiphonesim_ iPhoneSimulator from iOS SDK 3.2+ (older versions: -Tda'+
   'rwin)'#010+
-  '3*2Tlinux_Linux'#010+
+  '3*2T','linux_Linux'#010+
   '3*2Tnetbsd_NetBSD'#010+
   '3*2Tnetware_Novell Netware Module (clib)'#010+
   '3*2Tnetwlibc_Novell Netware Module (libc)'#010+
-  '3*2Topenbsd','_OpenBSD'#010+
+  '3*2Topenbsd_OpenBSD'#010+
   '3*2Tos2_OS/2 / eComStation'#010+
   '3*2Tsunos_SunOS/Solaris'#010+
   '3*2Tsymbian_Symbian OS'#010+
   '3*2Tsolaris_Solaris'#010+
-  '3*2Twatcom_Watcom compatible DOS extender'#010+
+  '3*2Twatcom_Wa','tcom compatible DOS extender'#010+
   '3*2Twdosx_WDOSX DOS extender'#010+
   '3*2Twin32_Windows 32 Bit'#010+
   '3*2Twince_Windows CE'#010+
-  '4*2Tdarwin_Darwin/Ma','c OS X'#010+
+  '4*2Tdarwin_Darwin/Mac OS X'#010+
   '4*2Tlinux_Linux'#010+
   '4*2Twin64_Win64 (64 bit Windows systems)'#010+
   '6*2Tamiga_Commodore Amiga'#010+
-  '6*2Tatari_Atari ST/STe/TT'#010+
+  '6*2Tatari_Atari ST/STe/TT'#010,
   '6*2Tlinux_Linux'#010+
   '6*2Tpalmos_PalmOS'#010+
   'A*2Tdarwin_Darwin/iPhoneOS/iOS'#010+
   'A*2Tlinux_Linux'#010+
   'A*2Twince_Windows CE'#010+
   'P*2Tamiga_AmigaOS'#010+
-  'P*2T','darwin_Darwin/Mac OS X'#010+
+  'P*2Tdarwin_Darwin/Mac OS X'#010+
   'P*2Tlinux_Linux'#010+
   'P*2Tmacos_Mac OS (classic)'#010+
   'P*2Tmorphos_MorphOS'#010+
   'S*2Tsolaris_Solaris'#010+
-  'S*2Tlinux_Linux'#010+
+  'S*2Tlinux_','Linux'#010+
   '**1u<x>_Undefines the symbol <x>'#010+
   '**1U_Unit options:'#010+
   '**2Un_Do not check where the unit name matches the file name'#010+
-  '**2Ur','_Generate release unit files (never automatically recompiled)'#010+
+  '**2Ur_Generate release unit files (never automatically recompiled)'#010+
   '**2Us_Compile a system unit'#010+
-  '**1v<x>_Be verbose. <x> is a combination of the following letters:'#010+
+  '**1v<x>_Be verbose. <x> is',' a combination of the following letters:'#010+
   '**2*_e : Show errors (default)       0 : Show nothing (except errors)'#010+
-  '**2*_w : Show',' warnings               u : Show unit info'#010+
+  '**2*_w : Show warnings               u : Show unit info'#010+
   '**2*_n : Show notes                  t : Show tried/used files'#010+
-  '**2*_h : Show hints                  c : Show conditionals'#010+
+  '**2*_h : S','how hints                  c : Show conditionals'#010+
   '**2*_i : Show general info           d : Show debug info'#010+
-  '**2*_l : Show line','numbers            r : Rhide/GCC compatibility mod'+
-  'e'#010+
+  '**2*_l : Show linenumbers            r : Rhide/GCC compatibility mode'#010+
   '**2*_s : Show time stamps            q : Show message numbers'#010+
-  '**2*_a : Show everything             x : Executable info (Win32 only)'#010+
-  '**2*_b : Write file names messages   p : Write tree.log ','with parse t'+
-  'ree'#010+
+  '**','2*_a : Show everything             x : Executable info (Win32 only'+
+  ')'#010+
+  '**2*_b : Write file names messages   p : Write tree.log with parse tre'+
+  'e'#010+
   '**2*_    with full path              v : Write fpcdebug.txt with'#010+
-  '**2*_                                    lots of debugging info'#010+
+  '**2*_                              ','      lots of debugging info'#010+
   '**2*_m<x>,<y> : Don'#039't show messages numbered <x> and <y>'#010+
-  '**1W<x>_Target-specific options (targe','ts)'#010+
+  '**1W<x>_Target-specific options (targets)'#010+
   '3*2WA_Specify native type application (Windows)'#010+
   '4*2WA_Specify native type application (Windows)'#010+
-  'A*2WA_Specify native type application (Windows)'#010+
+  'A*2WA_Specify na','tive type application (Windows)'#010+
   '3*2Wb_Create a bundle instead of a library (Darwin)'#010+
-  'P*2Wb_Create a bundle instead of a libra','ry (Darwin)'#010+
+  'P*2Wb_Create a bundle instead of a library (Darwin)'#010+
   'p*2Wb_Create a bundle instead of a library (Darwin)'#010+
-  'A*2Wb_Create a bundle instead of a library (Darwin)'#010+
+  'A*2Wb_Create a bundle instead of a library (Darwin)'#010,
   '4*2Wb_Create a bundle instead of a library (Darwin)'#010+
   '3*2WB_Create a relocatable image (Windows, Symbian)'#010+
-  '3*2WBxxxx_Set image ','base to xxxx (Windows, Symbian)'#010+
+  '3*2WBxxxx_Set image base to xxxx (Windows, Symbian)'#010+
   '4*2WB_Create a relocatable image (Windows)'#010+
-  '4*2WBxxxx_Set image base to xxxx (Windows)'#010+
+  '4*2WBxxxx_Set image base to xxxx (Windows',')'#010+
   'A*2WB_Create a relocatable image (Windows, Symbian)'#010+
   'A*2WBxxxx_Set image base to xxxx (Windows, Symbian)'#010+
-  '3*2WC_Specify cons','ole type application (EMX, OS/2, Windows)'#010+
+  '3*2WC_Specify console type application (EMX, OS/2, Windows)'#010+
   '4*2WC_Specify console type application (EMX, OS/2, Windows)'#010+
-  'A*2WC_Specify console type application (Windows)'#010+
+  'A*2WC_Specify ','console type application (Windows)'#010+
   'P*2WC_Specify console type application (Classic Mac OS)'#010+
-  '3*2WD_Use DEFFILE to export funct','ions of DLL or EXE (Windows)'#010+
+  '3*2WD_Use DEFFILE to export functions of DLL or EXE (Windows)'#010+
   '4*2WD_Use DEFFILE to export functions of DLL or EXE (Windows)'#010+
-  'A*2WD_Use DEFFILE to export functions of DLL or EXE (Windows)'#010+
+  'A*2WD_Use DEFFILE to expo','rt functions of DLL or EXE (Windows)'#010+
   '3*2We_Use external resources (Darwin)'#010+
   '4*2We_Use external resources (Darwin)'#010+
-  'A*2We_Use e','xternal resources (Darwin)'#010+
+  'A*2We_Use external resources (Darwin)'#010+
   'P*2We_Use external resources (Darwin)'#010+
   'p*2We_Use external resources (Darwin)'#010+
-  '3*2WF_Specify full-screen type application (EMX, OS/2)'#010+
+  '3*2WF_Specify',' full-screen type application (EMX, OS/2)'#010+
   '3*2WG_Specify graphic type application (EMX, OS/2, Windows)'#010+
-  '4*2WG_Specify graphic ','type application (EMX, OS/2, Windows)'#010+
+  '4*2WG_Specify graphic type application (EMX, OS/2, Windows)'#010+
   'A*2WG_Specify graphic type application (Windows)'#010+
-  'P*2WG_Specify graphic type application (Classic Mac OS)'#010+
+  'P*2WG_Specify graphic type ap','plication (Classic Mac OS)'#010+
   '3*2Wi_Use internal resources (Darwin)'#010+
   '4*2Wi_Use internal resources (Darwin)'#010+
-  'A*2Wi_Use internal re','sources (Darwin)'#010+
+  'A*2Wi_Use internal resources (Darwin)'#010+
   'P*2Wi_Use internal resources (Darwin)'#010+
   'p*2Wi_Use internal resources (Darwin)'#010+
-  '3*2WI_Turn on/off the usage of import sections (Windows)'#010+
+  '3*2WI_Turn on/off the u','sage of import sections (Windows)'#010+
   '4*2WI_Turn on/off the usage of import sections (Windows)'#010+
-  'A*2WI_Turn on/off the usage of im','port sections (Windows)'#010+
+  'A*2WI_Turn on/off the usage of import sections (Windows)'#010+
   '3*2WN_Do not generate relocation code, needed for debugging (Windows)'#010+
-  '4*2WN_Do not generate relocation code, needed for debugging (Windows)'#010+
+  '4*2WN_Do not generate ','relocation code, needed for debugging (Windows'+
+  ')'#010+
   'A*2WN_Do not generate relocation code, needed for debugging (Windows)'#010+
-  'A*2Wpx','xxx_Specify the controller type, see fpc -i for possible value'+
+  'A*2Wpxxxx_Specify the controller type, see fpc -i for possible values'#010+
+  'V*2Wpxxxx_Specify the controller type, see fpc -i fo','r possible value'+
   's'#010+
-  'V*2Wpxxxx_Specify the controller type, see fpc -i for possible values'#010+
   '3*2WR_Generate relocation code (Windows)'#010+
   '4*2WR_Generate relocation code (Windows)'#010+
-  'A*2WR_Generate relocatio','n code (Windows)'#010+
+  'A*2WR_Generate relocation code (Windows)'#010+
   'P*2WT_Specify MPW tool type application (Classic Mac OS)'#010+
   '**2WX_Enable executable stack (Linux)'#010+
-  '**1X_Executable options:'#010+
+  '**1X','_Executable options:'#010+
   '**2Xc_Pass --shared/-dynamic to the linker (BeOS, Darwin, FreeBSD, Lin'+
   'ux)'#010+
-  '**2Xd_Do not use standard lib','rary search path (needed for cross comp'+
-  'ile)'#010+
+  '**2Xd_Do not use standard library search path (needed for cross compil'+
+  'e)'#010+
   '**2Xe_Use external linker'#010+
-  '**2Xg_Create debuginfo in a separate file and add a debuglink section '+
-  'to executable'#010+
+  '**2Xg_Create debuginfo in a separate file and ','add a debuglink sectio'+
+  'n to executable'#010+
   '**2XD_Try to link units dynamically      (defines FPC_LINK_DYNAMIC)'#010+
-  '**2Xi_Use internal',' linker'#010+
+  '**2Xi_Use internal linker'#010+
   '**2Xm_Generate link map'#010+
   '**2XM<x>_Set the name of the '#039'main'#039' program routine (default i'+
   's '#039'main'#039')'#010+
-  '**2XP<x>_Prepend the binutils names with the prefix <x>'#010+
+  '**2XP<x>_Pre','pend the binutils names with the prefix <x>'#010+
   '**2Xr<x>_Set the linker'#039's rlink-path to <x> (needed for cross comp'+
-  'ile, see the l','d manual for more information) (BeOS, Linux)'#010+
+  'ile, see the ld manual for more information) (BeOS, Linux)'#010+
   '**2XR<x>_Prepend <x> to all linker search paths (BeOS, Darwin, FreeBSD'+
-  ', Linux, Mac OS, Solaris)'#010+
+  ',',' Linux, Mac OS, Solaris)'#010+
   '**2Xs_Strip all symbols from executable'#010+
-  '**2XS_Try to link units statically (default, defines FPC_LI','NK_STATIC'+
-  ')'#010+
+  '**2XS_Try to link units statically (default, defines FPC_LINK_STATIC)'#010+
   '**2Xt_Link with static libraries (-static is passed to linker)'#010+
-  '**2XX_Try to smartlink units             (defines FPC_LINK_SMART)'#010+
+  '**2XX_Try to smartlink units             (','defines FPC_LINK_SMART)'#010+
   '**1*_'#010+
   '**1?_Show this help'#010+
   '**1h_Shows this help without waiting'