* by default disable the warning about interfaces raising a particular

    method's visibility, because this is common practice in Object-Pascal.
    It can be re-enabled with {$warn INTF_RAISE_VISIBILITY on} (mainly
    useful when trying to keep code compatible with the JVM target)

git-svn-id: trunk@21329 -

compiler/msg/errore.msg

@@ -1854,13 +1854,16 @@ type_e_no_managed_assign_generic_typecast=04115_E_The assignment side of an expr
 % to statically determine that no type-unsafe assignments or operations occur. By assigning a parent class type to a
 % variable of a child type by typecasting the assignment side to the parent class type, the type safety would no
 % longer be guaranteed and the generated code would fail verification at run time time.
-type_w_interface_lower_visibility=04116_W_The interface method "$1" raises the visibility of "$2" to public when accessed via an interface instance
+type_w_interface_lower_visibility=04116_-W_The interface method "$1" raises the visibility of "$2" to public when accessed via an interface instance
 type_e_interface_lower_visibility=04117_E_The interface method "$1" has a higher visibility (public) than "$2"
 % All methods in an interface have always public visibility. That means that if
 % an interface method is implemented using a (strict) protected or private method,
 % this method is actually publicly accessible via the interface. On the JVM
 % target this situation results in an error because the JVM rejects such
-% attempts to circumvent the visibility rules.
+% attempts to circumvent the visibility rules. On other targets this is a
+% warning that is disabled by default because such situations are common
+% practice, but it can be enabled in case you are concerned with keeping your
+% code compilable for the JVM target.
 % \end{description}
 #
 # Symtable

compiler/msgidx.inc

@@ -942,7 +942,7 @@ const
   option_info=11024;
   option_help_pages=11025;
 
-  MsgTxtSize = 65773;
+  MsgTxtSize = 65774;
 
   MsgIdxMax : array[1..20] of longint=(
     26,92,322,118,87,55,116,26,202,63,

compiler/msgtxt.inc

@@ -649,190 +649,190 @@ const msgtxt : array[0..000274,1..240] of char=(
   ' platforms, simply assign a value to them instead.'#000+
   '04115_E_The assignment side of an expression cannot be typecasted to a'+
   ' supertype on managed platforms'#000+
-  '04116_W_The interface method "$1" raises the vi','sibility of "$2" to p'+
-  'ublic when accessed via an interface instance'#000+
+  '04116_-W_The interface method "$1" raises the v','isibility of "$2" to '+
+  'public when accessed via an interface instance'#000+
   '04117_E_The interface method "$1" has a higher visibility (public) tha'+
   'n "$2"'#000+
   '05000_E_Identifier not found "$1"'#000+
   '05001_F_Internal Error in SymTableStack()'#000+
-  '05002_E_Duplicate id','entifier "$1"'#000+
+  '05002_E_Duplicate i','dentifier "$1"'#000+
   '05003_H_Identifier already defined in $1 at line $2'#000+
   '05004_E_Unknown identifier "$1"'#000+
   '05005_E_Forward declaration not solved "$1"'#000+
   '05007_E_Error in type definition'#000+
   '05009_E_Forward type not resolved "$1"'#000+
-  '05010_E_Only static variab','les can be used in static methods or outsi'+
+  '05010_E_Only static varia','bles can be used in static methods or outsi'+
   'de methods'#000+
   '05012_F_record or class type expected'#000+
   '05013_E_Instances of classes or objects with an abstract method are no'+
   't allowed'#000+
   '05014_W_Label not defined "$1"'#000+
-  '05015_E_Label used but not defined "$1','"'#000+
+  '05015_E_Label used but not defined "$','1"'#000+
   '05016_E_Illegal label declaration'#000+
   '05017_E_GOTO and LABEL are not supported (use switch -Sg)'#000+
   '05018_E_Label not found'#000+
   '05019_E_identifier isn'#039't a label'#000+
   '05020_E_label already defined'#000+
   '05021_E_illegal type declaration of set elements'#000+
-  '05022_E_Fo','rward class definition not resolved "$1"'#000+
+  '05022_E_F','orward class definition not resolved "$1"'#000+
   '05023_H_Unit "$1" not used in $2'#000+
   '05024_H_Parameter "$1" not used'#000+
   '05025_N_Local variable "$1" not used'#000+
   '05026_H_Value parameter "$1" is assigned but never used'#000+
-  '05027_N_Local variable "$1" is assigned b','ut never used'#000+
+  '05027_N_Local variable "$1" is assigned ','but never used'#000+
   '05028_H_Local $1 "$2" is not used'#000+
   '05029_N_Private field "$1.$2" is never used'#000+
   '05030_N_Private field "$1.$2" is assigned but never used'#000+
   '05031_N_Private method "$1.$2" never used'#000+
   '05032_E_Set type expected'#000+
-  '05033_W_Function result',' does not seem to be set'#000+
+  '05033_W_Function resul','t does not seem to be set'#000+
   '05034_W_Type "$1" is not aligned correctly in current record for C'#000+
   '05035_E_Unknown record field identifier "$1"'#000+
   '05036_W_Local variable "$1" does not seem to be initialized'#000+
-  '05037_W_Variable "$1" does not seem to be i','nitialized'#000+
+  '05037_W_Variable "$1" does not seem to be ','initialized'#000+
   '05038_E_identifier idents no member "$1"'#000+
   '05039_H_Found declaration: $1'#000+
   '05040_E_Data element too large'#000+
   '05042_E_No matching implementation for interface method "$1" found'#000+
   '05043_W_Symbol "$1" is deprecated'#000+
-  '05044_W_Symbol "$1" is not',' portable'#000+
+  '05044_W_Symbol "$1" is no','t portable'#000+
   '05055_W_Symbol "$1" is not implemented'#000+
   '05056_E_Can'#039't create unique type from this type'#000+
   '05057_H_Local variable "$1" does not seem to be initialized'#000+
   '05058_H_Variable "$1" does not seem to be initialized'#000+
-  '05059_W_Function result varia','ble does not seem to initialized'#000+
+  '05059_W_Function result vari','able does not seem to initialized'#000+
   '05060_H_Function result variable does not seem to be initialized'#000+
   '05061_W_Variable "$1" read but nowhere assigned'#000+
   '05062_H_Found abstract method: $1'#000+
   '05063_W_Symbol "$1" is experimental'#000+
-  '05064_W_Forward declarat','ion "$1" not resolved, assumed external'#000+
+  '05064_W_Forward declara','tion "$1" not resolved, assumed external'#000+
   '05065_W_Symbol "$1" is belongs to a library'#000+
   '05066_W_Symbol "$1" is deprecated: "$2"'#000+
   '05067_E_Cannot find an enumerator for the type "$1"'#000+
   '05068_E_Cannot find a "MoveNext" method in enumerator "$1"'#000+
-  '05069','_E_Cannot find a "Current" property in enumerator "$1"'#000+
+  '0506','9_E_Cannot find a "Current" property in enumerator "$1"'#000+
   '05070_E_Mismatch between number of declared parameters and number of c'+
   'olons in message string.'#000+
   '05071_N_Private type "$1.$2" never used'#000+
   '05072_N_Private const "$1.$2" never used'#000+
-  '05073_N_P','rivate property "$1.$2" never used'#000+
+  '05073_N_','Private property "$1.$2" never used'#000+
   '05074_W_Unit "$1" is deprecated'#000+
   '05075_W_Unit "$1" is deprecated: "$2"'#000+
   '05076_W_Unit "$1" is not portable'#000+
   '05077_W_Unit "$1" is belongs to a library'#000+
   '05078_W_Unit "$1" is not implemented'#000+
-  '05079_W_Unit "$1" is e','xperimental'#000+
+  '05079_W_Unit "$1" is ','experimental'#000+
   '05080_E_No complete definition of the formally declared class "$1" is '+
   'in scope'#000+
   '05081_E_Gotos into initialization or finalization blocks of units are '+
   'not allowed'#000+
   '05082_E_Invalid external name "$1" for formal class "$2"'#000+
-  '05083_E_Co','mplete class definition with external name "$1" here'#000+
+  '05083_E_C','omplete class definition with external name "$1" here'#000+
   '05084_W_Possible library conflict: symbol "$1" from library "$2" also '+
   'found in library "$3"'#000+
   '05085_E_Cannot add implicit constructor '#039'Create'#039' because ident'+
   'ifier already used by "$1"'#000+
-  '05086_','E_Cannot generate default constructor for class, because paren'+
+  '05086','_E_Cannot generate default constructor for class, because paren'+
   't has no parameterless constructor'#000+
   '06009_E_Parameter list size exceeds 65535 bytes'#000+
   '06012_E_File types must be var parameters'#000+
-  '06013_E_The use of a far pointer isn'#039't allowed there'#000,
+  '06013_E_The use of a far pointer isn'#039't allowed there',#000+
   '06015_E_EXPORT declared functions can'#039't be called'#000+
   '06016_W_Possible illegal call of constructor or destructor'#000+
   '06017_N_Inefficient code'#000+
   '06018_W_unreachable code'#000+
   '06020_E_Abstract methods can'#039't be called directly'#000+
-  '06027_DL_Register $1 weight $2 ','$3'#000+
+  '06027_DL_Register $1 weight $2',' $3'#000+
   '06029_DL_Stack frame is omitted'#000+
   '06031_E_Object or class methods can'#039't be inline.'#000+
   '06032_E_Procvar calls cannot be inline.'#000+
   '06033_E_No code for inline procedure stored'#000+
   '06035_E_Element zero of an ansi/wide- or longstring can'#039't be acces'+
-  'sed, u','se (set)length instead'#000+
+  'sed, ','use (set)length instead'#000+
   '06037_E_Constructors or destructors cannot be called inside a '#039'wit'+
   'h'#039' clause'#000+
   '06038_E_Cannot call message handler methods directly'#000+
   '06039_E_Jump in or outside of an exception block'#000+
-  '06040_E_Control flow statements aren'#039't ','allowed in a finally bloc'+
+  '06040_E_Control flow statements aren'#039't',' allowed in a finally bloc'+
   'k'#000+
   '06041_W_Parameters size exceeds limit for certain cpu'#039's'#000+
   '06042_W_Local variable size exceed limit for certain cpu'#039's'#000+
   '06043_E_Local variables size exceeds supported limit'#000+
   '06044_E_BREAK not allowed'#000+
-  '06045_E_CONTINUE no','t allowed'#000+
+  '06045_E_CONTINUE n','ot allowed'#000+
   '06046_F_Unknown compilerproc "$1". Check if you use the correct run ti'+
   'me library.'#000+
   '06047_F_Cannot find system type "$1". Check if you use the correct run'+
   ' time library.'#000+
   '06048_H_Inherited call to abstract method ignored'#000+
-  '06049_E_Goto ','label "$1" not defined or optimized away'#000+
+  '06049_E_Goto',' label "$1" not defined or optimized away'#000+
   '06050_F_Cannot find type "$1" in unit "$2". Check if you use the corre'+
   'ct run time library.'#000+
   '06051_E_Interprocedural gotos are allowed only to outer subroutines'#000+
-  '06052_E_Label must be defined in the sam','e scope as it is declared'#000+
+  '06052_E_Label must be defined in the sa','me scope as it is declared'#000+
   '06053_E_Leaving procedures containing explicit or implicit exceptions '+
   'frames using goto is not allowed'#000+
   '06054_E_In ISO mode, the mod operator is defined only for positive quo'+
   'tient'#000+
-  '07000_DL_Starting $1 styled assembl','er parsing'#000+
+  '07000_DL_Starting $1 styled assemb','ler parsing'#000+
   '07001_DL_Finished $1 styled assembler parsing'#000+
   '07002_E_Non-label pattern contains @'#000+
   '07004_E_Error building record offset'#000+
   '07005_E_OFFSET used without identifier'#000+
   '07006_E_TYPE used without identifier'#000+
-  '07007_E_Cannot use local variable',' or parameters here'#000+
+  '07007_E_Cannot use local variabl','e or parameters here'#000+
   '07008_E_need to use OFFSET here'#000+
   '07009_E_need to use $ here'#000+
   '07010_E_Cannot use multiple relocatable symbols'#000+
   '07011_E_Relocatable symbol can only be added'#000+
   '07012_E_Invalid constant expression'#000+
-  '07013_E_Relocatable symbol is no','t allowed'#000+
+  '07013_E_Relocatable symbol is n','ot allowed'#000+
   '07014_E_Invalid reference syntax'#000+
   '07015_E_You cannot reach $1 from that code'#000+
   '07016_E_Local symbols/labels aren'#039't allowed as references'#000+
   '07017_E_Invalid base and index register usage'#000+
   '07018_W_Possible error in object field handling'#000+
-  '07','019_E_Wrong scale factor specified'#000+
+  '0','7019_E_Wrong scale factor specified'#000+
   '07020_E_Multiple index register usage'#000+
   '07021_E_Invalid operand type'#000+
   '07022_E_Invalid string as opcode operand: $1'#000+
   '07023_W_@CODE and @DATA not supported'#000+
   '07024_E_Null label references are not allowed'#000+
-  '07025_E_D','ivide by zero in asm evaluator'#000+
+  '07025_E_','Divide by zero in asm evaluator'#000+
   '07026_E_Illegal expression'#000+
   '07027_E_escape sequence ignored: $1'#000+
   '07028_E_Invalid symbol reference'#000+
   '07029_W_Fwait can cause emulation problems with emu387'#000+
   '07030_W_$1 without operand translated into $1P'#000+
-  '07031_W_ENT','ER instruction is not supported by Linux kernel'#000+
+  '07031_W_EN','TER instruction is not supported by Linux kernel'#000+
   '07032_W_Calling an overload function in assembler'#000+
   '07033_E_Unsupported symbol type for operand'#000+
   '07034_E_Constant value out of bounds'#000+
   '07035_E_Error converting decimal $1'#000+
-  '07036_E_Error converting ','octal $1'#000+
+  '07036_E_Error converting',' octal $1'#000+
   '07037_E_Error converting binary $1'#000+
   '07038_E_Error converting hexadecimal $1'#000+
   '07039_H_$1 translated to $2'#000+
   '07040_W_$1 is associated to an overloaded function'#000+
   '07041_E_Cannot use SELF outside a method'#000+
-  '07042_E_Cannot use OLDEBP outside a ','nested procedure'#000+
+  '07042_E_Cannot use OLDEBP outside a',' nested procedure'#000+
   '07043_W_Procedures can'#039't return any value in asm code'#000+
   '07044_E_SEG not supported'#000+
   '07045_E_Size suffix and destination or source size do not match'#000+
   '07046_W_Size suffix and destination or source size do not match'#000+
-  '07047_E_Assembl','er syntax error'#000+
+  '07047_E_Assemb','ler syntax error'#000+
   '07048_E_Invalid combination of opcode and operands'#000+
   '07049_E_Assembler syntax error in operand'#000+
   '07050_E_Assembler syntax error in constant'#000+
   '07051_E_Invalid String expression'#000+
-  '07052_W_constant with symbol $1 for address which is n','ot on a pointe'+
+  '07052_W_constant with symbol $1 for address which is ','not on a pointe'+
   'r'#000+
   '07053_E_Unrecognized opcode $1'#000+
   '07054_E_Invalid or missing opcode'#000+
   '07055_E_Invalid combination of prefix and opcode: $1'#000+
   '07056_E_Invalid combination of override and opcode: $1'#000+
   '07057_E_Too many operands on line'#000+
-  '07058_W_NEAR igno','red'#000+
+  '07058_W_NEAR ign','ored'#000+
   '07059_W_FAR ignored'#000+
   '07060_E_Duplicate local symbol $1'#000+
   '07061_E_Undefined local symbol $1'#000+
@@ -840,135 +840,135 @@ const msgtxt : array[0..000274,1..240] of char=(
   '07063_E_Invalid register name'#000+
   '07064_E_Invalid floating point register name'#000+
   '07066_W_Modulo not supported'#000+
-  '07067_E_','Invalid floating point constant $1'#000+
+  '07067_E','_Invalid floating point constant $1'#000+
   '07068_E_Invalid floating point expression'#000+
   '07069_E_Wrong symbol type'#000+
   '07070_E_Cannot index a local var or parameter with a register'#000+
   '07071_E_Invalid segment override expression'#000+
-  '07072_W_Identifier $1 supposed ','external'#000+
+  '07072_W_Identifier $1 supposed',' external'#000+
   '07073_E_Strings not allowed as constants'#000+
   '07074_E_No type of variable specified'#000+
   '07075_E_assembler code not returned to text section'#000+
   '07076_E_Not a directive or local symbol $1'#000+
   '07077_E_Using a defined name as a local label'#000+
-  '07078_E_Dol','lar token is used without an identifier'#000+
+  '07078_E_Do','llar token is used without an identifier'#000+
   '07079_W_32bit constant created for address'#000+
   '07080_N_.align is target specific, use .balign or .p2align'#000+
   '07081_E_Can'#039't access fields directly for parameters'#000+
-  '07082_E_Can'#039't access fields of objects/classes',' directly'#000+
+  '07082_E_Can'#039't access fields of objects/classe','s directly'#000+
   '07083_E_No size specified and unable to determine the size of the oper'+
   'ands'#000+
   '07084_E_Cannot use RESULT in this function'#000+
   '07086_W_"$1" without operand translated into "$1 %st,%st(1)"'#000+
-  '07087_W_"$1 %st(n)" translated into "$1 %st,%st(n)"',#000+
+  '07087_W_"$1 %st(n)" translated into "$1 %st,%st(n)','"'#000+
   '07088_W_"$1 %st(n)" translated into "$1 %st(n),%st"'#000+
   '07089_E_Char < not allowed here'#000+
   '07090_E_Char > not allowed here'#000+
   '07093_W_ALIGN not supported'#000+
   '07094_E_Inc and Dec cannot be together'#000+
   '07095_E_Invalid reglist for movem'#000+
-  '07096_E_Reglist invali','d for opcode'#000+
+  '07096_E_Reglist inval','id for opcode'#000+
   '07097_E_Higher cpu mode required ($1)'#000+
   '07098_W_No size specified and unable to determine the size of the oper'+
   'ands, using DWORD as default'#000+
   '07099_E_Syntax error while trying to parse a shifter operand'#000+
-  '07100_E_Address of packed com','ponent is not at a byte boundary'#000+
+  '07100_E_Address of packed co','mponent is not at a byte boundary'#000+
   '07101_W_No size specified and unable to determine the size of the oper'+
   'ands, using BYTE as default'#000+
   '07102_W_Use of +offset(%ebp) for parameters invalid here'#000+
-  '07103_W_Use of +offset(%ebp) is not compatible with ','regcall conventi'+
+  '07103_W_Use of +offset(%ebp) is not compatible with',' regcall conventi'+
   'on'#000+
   '07104_W_Use of -offset(%ebp) is not recommended for local variable acc'+
   'ess'#000+
   '07105_W_Use of -offset(%esp), access may cause a crash or value may be'+
   ' lost'#000+
-  '07106_E_VMTOffset must be used in combination with a virtual method, a'+
-  'n','d "$1" is not virtual'#000+
+  '07106_E_VMTOffset must be used in combination with a virtual method, a',
+  'nd "$1" is not virtual'#000+
   '07107_E_Generating PIC, but reference is not PIC-safe'#000+
   '07108_E_All registers in a register set must be of the same kind and w'+
   'idth'#000+
   '07109_E_A register set cannot be empty'#000+
-  '07110_W_@GOTPCREL is useless and potentially dange','reous for local sy'+
+  '07110_W_@GOTPCREL is useless and potentially dang','ereous for local sy'+
   'mbols'#000+
   '07111_W_Constant with general purpose segment register'#000+
   '07112_E_Invalid offset value for $1'#000+
   '07113_E_Invalid register for $1'#000+
   '07114_E_SEH directives are allowed only in pure assembler procedures'#000+
-  '07115_E_Directive "$1" i','s not supported for the current target'#000+
+  '07115_E_Directive "$1" ','is not supported for the current target'#000+
   '08000_F_Too many assembler files'#000+
   '08001_F_Selected assembler output not supported'#000+
   '08002_F_Comp not supported'#000+
   '08003_F_Direct not support for binary writers'#000+
-  '08004_E_Allocating of data is only allowed in b','ss section'#000+
+  '08004_E_Allocating of data is only allowed in ','bss section'#000+
   '08005_F_No binary writer selected'#000+
   '08006_E_Asm: Opcode $1 not in table'#000+
   '08007_E_Asm: $1 invalid combination of opcode and operands'#000+
   '08008_E_Asm: 16 Bit references not supported'#000+
   '08009_E_Asm: Invalid effective address'#000+
-  '08010_E_Asm: Imm','ediate or reference expected'#000+
+  '08010_E_Asm: Im','mediate or reference expected'#000+
   '08011_E_Asm: $1 value exceeds bounds $2'#000+
   '08012_E_Asm: Short jump is out of range $1'#000+
   '08013_E_Asm: Undefined label $1'#000+
   '08014_E_Asm: Comp type not supported for this target'#000+
-  '08015_E_Asm: Extended type not supported fo','r this target'#000+
+  '08015_E_Asm: Extended type not supported f','or this target'#000+
   '08016_E_Asm: Duplicate label $1'#000+
   '08017_E_Asm: Redefined label $1'#000+
   '08018_E_Asm: First defined here'#000+
   '08019_E_Asm: Invalid register $1'#000+
   '08020_E_Asm: 16 or 32 Bit references not supported'#000+
   '08021_E_Asm: 64 Bit operands not supported'#000+
-  '080','22_E_Asm: AH,BH,CH or DH cannot be used in an instruction requiri'+
+  '08','022_E_Asm: AH,BH,CH or DH cannot be used in an instruction requiri'+
   'ng REX prefix'#000+
   '08023_E_Missing .seh_endprologue directive'#000+
   '08024_E_Function prologue exceeds 255 bytes'#000+
   '08025_E_.seh_handlerdata directive without preceding .seh_handler'#000+
-  '09000_W_','Source operating system redefined'#000+
+  '09000_W','_Source operating system redefined'#000+
   '09001_I_Assembling (pipe) $1'#000+
   '09002_E_Can'#039't create assembler file: $1'#000+
   '09003_E_Can'#039't create object file: $1 (error code: $2)'#000+
   '09004_E_Can'#039't create archive file: $1'#000+
-  '09005_E_Assembler $1 not found, switching to ','external assembling'#000+
+  '09005_E_Assembler $1 not found, switching to',' external assembling'#000+
   '09006_T_Using assembler: $1'#000+
   '09007_E_Error while assembling exitcode $1'#000+
   '09008_E_Can'#039't call the assembler, error $1 switching to external a'+
   'ssembling'#000+
   '09009_I_Assembling $1'#000+
   '09010_I_Assembling with smartlinking $1'#000+
-  '09011_W_Obj','ect $1 not found, Linking may fail !'#000+
+  '09011_W_Ob','ject $1 not found, Linking may fail !'#000+
   '09012_W_Library $1 not found, Linking may fail !'#000+
   '09013_E_Error while linking'#000+
   '09014_E_Can'#039't call the linker, switching to external linking'#000+
   '09015_I_Linking $1'#000+
-  '09016_E_Util $1 not found, switching to extern','al linking'#000+
+  '09016_E_Util $1 not found, switching to exter','nal linking'#000+
   '09017_T_Using util $1'#000+
   '09018_E_Creation of Executables not supported'#000+
   '09019_E_Creation of Dynamic/Shared Libraries not supported'#000+
   '09020_I_Closing script $1'#000+
   '09021_E_resource compiler "$1" not found, switching to external mode'#000+
-  '09022_I','_Compiling resource $1'#000+
+  '09022_','I_Compiling resource $1'#000+
   '09023_T_unit $1 can'#039't be statically linked, switching to smart lin'+
   'king'#000+
   '09024_T_unit $1 can'#039't be smart linked, switching to static linking'+
   #000+
   '09025_T_unit $1 can'#039't be shared linked, switching to static linkin'+
   'g'#000+
-  '09026_E_uni','t $1 can'#039't be smart or static linked'#000+
+  '09026_E_un','it $1 can'#039't be smart or static linked'#000+
   '09027_E_unit $1 can'#039't be shared or static linked'#000+
   '09028_D_Calling resource compiler "$1" with "$2" as command line'#000+
   '09029_E_Error while compiling resources'#000+
-  '09030_E_Can'#039't call the resource compiler "$1", sw','itching to exte'+
+  '09030_E_Can'#039't call the resource compiler "$1", s','witching to exte'+
   'rnal mode'#000+
   '09031_E_Can'#039't open resource file "$1"'#000+
   '09032_E_Can'#039't write resource file "$1"'#000+
   '09033_N_File "$1" not found for backquoted cat command'#000+
   '09128_F_Can'#039't post process executable $1'#000+
   '09129_F_Can'#039't open executable $1'#000+
-  '09130_X_S','ize of Code: $1 bytes'#000+
+  '09130_X_','Size of Code: $1 bytes'#000+
   '09131_X_Size of initialized data: $1 bytes'#000+
   '09132_X_Size of uninitialized data: $1 bytes'#000+
   '09133_X_Stack space reserved: $1 bytes'#000+
   '09134_X_Stack space committed: $1 bytes'#000+
-  '09200_F_Executable image size is too big for $1 tar','get.'#000+
+  '09200_F_Executable image size is too big for $1 ta','rget.'#000+
   '09201_W_Object file "$1" contains 32-bit absolute relocation to symbol'+
   ' "$2".'#000+
   '10000_T_Unitsearch: $1'#000+
@@ -977,171 +977,171 @@ const msgtxt : array[0..000274,1..240] of char=(
   '10003_U_PPU Flags: $1'#000+
   '10004_U_PPU Crc: $1'#000+
   '10005_U_PPU Time: $1'#000+
-  '10006_U_PPU File too short'#000+
-  '1','0007_U_PPU Invalid Header (no PPU at the begin)'#000+
+  '10006_U_PPU File too short'#000,
+  '10007_U_PPU Invalid Header (no PPU at the begin)'#000+
   '10008_U_PPU Invalid Version $1'#000+
   '10009_U_PPU is compiled for another processor'#000+
   '10010_U_PPU is compiled for another target'#000+
   '10011_U_PPU Source: $1'#000+
   '10012_U_Writing $1'#000+
-  '10013_F_Can'#039't Write PPU-File'#000+
-  '1','0014_F_Error reading PPU-File'#000+
+  '10013_F_Can'#039't Write PPU-File'#000,
+  '10014_F_Error reading PPU-File'#000+
   '10015_F_unexpected end of PPU-File'#000+
   '10016_F_Invalid PPU-File entry: $1'#000+
   '10017_F_PPU Dbx count problem'#000+
   '10018_E_Illegal unit name: $1'#000+
   '10019_F_Too much units'#000+
   '10020_F_Circular unit reference between $1 and $2'#000+
-  '10021_F','_Can'#039't compile unit $1, no sources available'#000+
+  '10021_','F_Can'#039't compile unit $1, no sources available'#000+
   '10022_F_Can'#039't find unit $1 used by $2'#000+
   '10023_W_Unit $1 was not found but $2 exists'#000+
   '10024_F_Unit $1 searched but $2 found'#000+
   '10025_W_Compiling the system unit requires the -Us switch'#000+
-  '10026_F_There wer','e $1 errors compiling module, stopping'#000+
+  '10026_F_There we','re $1 errors compiling module, stopping'#000+
   '10027_U_Load from $1 ($2) unit $3'#000+
   '10028_U_Recompiling $1, checksum changed for $2'#000+
   '10029_U_Recompiling $1, source found only'#000+
   '10030_U_Recompiling unit, static lib is older than ppufile'#000+
-  '10031_U_Recompilin','g unit, shared lib is older than ppufile'#000+
+  '10031_U_Recompili','ng unit, shared lib is older than ppufile'#000+
   '10032_U_Recompiling unit, obj and asm are older than ppufile'#000+
   '10033_U_Recompiling unit, obj is older than asm'#000+
   '10034_U_Parsing interface of $1'#000+
   '10035_U_Parsing implementation of $1'#000+
-  '10036_U_Second load f','or unit $1'#000+
+  '10036_U_Second load ','for unit $1'#000+
   '10037_U_PPU Check file $1 time $2'#000+
   '10040_W_Can'#039't recompile unit $1, but found modifed include files'#000+
   '10041_U_File $1 is newer than the one used for creating PPU file $2'#000+
-  '10042_U_Trying to use a unit which was compiled with a differe','nt FPU'+
+  '10042_U_Trying to use a unit which was compiled with a differ','ent FPU'+
   ' mode'#000+
   '10043_U_Loading interface units from $1'#000+
   '10044_U_Loading implementation units from $1'#000+
   '10045_U_Interface CRC changed for unit $1'#000+
   '10046_U_Implementation CRC changed for unit $1'#000+
   '10047_U_Finished compiling unit $1'#000+
-  '10048_U_Adding depe','ndency: $1 depends on $2'#000+
+  '10048_U_Adding dep','endency: $1 depends on $2'#000+
   '10049_U_No reload, is caller: $1'#000+
   '10050_U_No reload, already in second compile: $1'#000+
   '10051_U_Flag for reload: $1'#000+
   '10052_U_Forced reloading'#000+
   '10053_U_Previous state of $1: $2'#000+
-  '10054_U_Already compiling $1, setting second co','mpile'#000+
+  '10054_U_Already compiling $1, setting second c','ompile'#000+
   '10055_U_Loading unit $1'#000+
   '10056_U_Finished loading unit $1'#000+
   '10057_U_Registering new unit $1'#000+
   '10058_U_Re-resolving unit $1'#000+
   '10059_U_Skipping re-resolving unit $1, still loading used units'#000+
   '10060_U_Unloading resource unit $1 (not needed)'#000+
-  '1006','1_E_Unit $1 was compiled using a different whole program optimiz'+
+  '100','61_E_Unit $1 was compiled using a different whole program optimiz'+
   'ation feedback input ($2, $3); recompile it without wpo or use the sam'+
   'e wpo feedback input file for this compilation invocation'#000+
-  '10062_U_Indirect interface (objects/classes) CRC',' changed for unit $1'+
+  '10062_U_Indirect interface (objects/classes) CR','C changed for unit $1'+
   #000+
   '11000_O_$1 [options] <inputfile> [options]'#000+
   '11001_W_Only one source file supported, changing source file to compil'+
   'e from "$1" into "$2"'#000+
   '11002_W_DEF file can be created only for OS/2'#000+
-  '11003_E_nested response files are not ','supported'#000+
+  '11003_E_nested response files are not',' supported'#000+
   '11004_F_No source file name in command line'#000+
   '11005_N_No option inside $1 config file'#000+
   '11006_E_Illegal parameter: $1'#000+
   '11007_H_-? writes help pages'#000+
   '11008_F_Too many config files nested'#000+
   '11009_F_Unable to open file $1'#000+
-  '11010_D_Reading fur','ther options from $1'#000+
+  '11010_D_Reading fu','rther options from $1'#000+
   '11011_W_Target is already set to: $1'#000+
   '11012_W_Shared libs not supported on DOS platform, reverting to static'+
   #000+
   '11013_F_In options file $1 at line $2 too many \var{\#IF(N)DEFs} encou'+
   'ntered'#000+
-  '11014_F_In options file $1 at line',' $2 unexpected \var{\#ENDIFs} enco'+
+  '11014_F_In options file $1 at lin','e $2 unexpected \var{\#ENDIFs} enco'+
   'untered'#000+
   '11015_F_Open conditional at the end of the options file'#000+
   '11016_W_Debug information generation is not supported by this executab'+
   'le'#000+
   '11017_H_Try recompiling with -dGDB'#000+
-  '11018_W_You are using the obsolete',' switch $1'#000+
+  '11018_W_You are using the obsolet','e switch $1'#000+
   '11019_W_You are using the obsolete switch $1, please use $2'#000+
   '11020_N_Switching assembler to default source writing assembler'#000+
   '11021_W_Assembler output selected "$1" is not compatible with "$2"'#000+
   '11022_W_"$1" assembler use forced'#000+
-  '1102','6_T_Reading options from file $1'#000+
+  '110','26_T_Reading options from file $1'#000+
   '11027_T_Reading options from environment $1'#000+
   '11028_D_Handling option "$1"'#000+
   '11029_O_*** press enter ***'#000+
   '11030_H_Start of reading config file $1'#000+
   '11031_H_End of reading config file $1'#000+
-  '11032_D_interpreting option ','"$1"'#000+
+  '11032_D_interpreting option',' "$1"'#000+
   '11036_D_interpreting firstpass option "$1"'#000+
   '11033_D_interpreting file option "$1"'#000+
   '11034_D_Reading config file "$1"'#000+
   '11035_D_found source file name "$1"'#000+
   '11039_E_Unknown codepage "$1"'#000+
   '11040_F_Config file $1 is a directory'#000+
-  '11041_W_Assembler',' output selected "$1" cannot generate debug info, d'+
+  '11041_W_Assemble','r output selected "$1" cannot generate debug info, d'+
   'ebugging disabled'#000+
   '11042_W_Use of ppc386.cfg is deprecated, please use fpc.cfg instead'#000+
   '11043_F_In options file $1 at line $2 \var{\#ELSE} directive without \'+
   'var{\#IF(N)DEF} found'#000+
-  '11044_F_Opt','ion "$1" is not, or not yet, supported on the current tar'+
+  '11044_F_Op','tion "$1" is not, or not yet, supported on the current tar'+
   'get platform'#000+
   '11045_F_The feature "$1" is not, or not yet, supported on the selected'+
   ' target platform'#000+
   '11046_N_DWARF debug information cannot be used with smart linking on t'+
-  'his target, s','witching to static linking'#000+
+  'his target, ','switching to static linking'#000+
   '11047_W_Option "$1" is ignored for the current target platform.'#000+
   '11048_W_Disabling external debug information because it is unsupported'+
   ' for the selected target/debug format combination.'#000+
-  '11049_N_DWARF debug informat','ion cannot be used with smart linking wi'+
+  '11049_N_DWARF debug informa','tion cannot be used with smart linking wi'+
   'th external assembler, disabling static library creation.'#000+
   '11050_E_Invalid value for MACOSX_DEPLOYMENT_TARGET environment variabl'+
   'e: $1'#000+
-  '11051_E_Invalid value for IPHONEOS_DEPLOYMENT_TARGET environment v','ar'+
+  '11051_E_Invalid value for IPHONEOS_DEPLOYMENT_TARGET environment ','var'+
   'iable: $1'#000+
   '11052_E_You must use a FPU type of VFPV2, VFPV3 or VFPV3_D16 when usin'+
   'g the EABIHF ABI target'#000+
   '12000_F_Cannot open whole program optimization feedback file "$1"'#000+
-  '12001_D_Processing whole program optimization information in wpo fee','d'+
-  'back file "$1"'#000+
+  '12001_D_Processing whole program optimization information in wpo fe','e'+
+  'dback file "$1"'#000+
   '12002_D_Finished processing the whole program optimization information'+
   ' in wpo feedback file "$1"'#000+
   '12003_E_Expected section header, but got "$2" at line $1 of wpo feedba'+
   'ck file'#000+
-  '12004_W_No handler registered for whole program o','ptimization section'+
+  '12004_W_No handler registered for whole program ','optimization section'+
   ' "$2" at line $1 of wpo feedback file, ignoring'#000+
   '12005_D_Found whole program optimization section "$1" with information'+
   ' about "$2"'#000+
   '12006_F_The selected whole program optimizations require a previously '+
-  'generated feedback fi','le (use -Fw to specify)'#000+
+  'generated feedback f','ile (use -Fw to specify)'#000+
   '12007_E_No collected information necessary to perform "$1" whole progr'+
   'am optimization found'#000+
   '12008_F_Specify a whole program optimization feedback file to store th'+
   'e generated info in (using -FW)'#000+
-  '12009_E_Not generating',' any whole program optimization information, y'+
+  '12009_E_Not generatin','g any whole program optimization information, y'+
   'et a feedback file was specified (using -FW)'#000+
   '12010_E_Not performing any whole program optimizations, yet an input f'+
   'eedback file was specified (using -Fw)'#000+
-  '12011_D_Skipping whole program optimizat','ion section "$1", because no'+
+  '12011_D_Skipping whole program optimiza','tion section "$1", because no'+
   't needed by the requested optimizations'#000+
   '12012_W_Overriding previously read information for "$1" from feedback '+
   'input file using information in section "$2"'#000+
-  '12013_E_Cannot extract symbol liveness information from p','rogram when'+
+  '12013_E_Cannot extract symbol liveness information from ','program when'+
   ' stripping symbols, use -Xs-'#000+
   '12014_E_Cannot extract symbol liveness information from program when w'+
   'hen not linking'#000+
   '12015_F_Cannot find "$1" or "$2" to extract symbol liveness informatio'+
   'n from linked program'#000+
-  '12016_E_Error during r','eading symbol liveness information produced by'+
+  '12016_E_Error during ','reading symbol liveness information produced by'+
   ' "$1"'#000+
   '12017_F_Error executing "$1" (exitcode: $2) to extract symbol informat'+
   'ion from linked program'#000+
   '12018_E_Collection of symbol liveness information can only help when u'+
-  'sing smart linking, use ','-CX -XX'#000+
+  'sing smart linking, use',' -CX -XX'#000+
   '12019_E_Cannot create specified whole program optimisation feedback fi'+
   'le "$1"'#000+
   '11023_Free Pascal Compiler version $FPCFULLVERSION [$FPCDATE] for $FPC'+
   'CPU'#010+
   'Copyright (c) 1993-2012 by Florian Klaempfl and others'#000+
-  '11024_Free Pascal Compile','r version $FPCVERSION'#010+
+  '11024_Free Pascal Compil','er version $FPCVERSION'#010+
   #010+
   'Compiler Date      : $FPCDATE'#010+
   'Compiler CPU Target: $FPCCPU'#010+
@@ -1155,7 +1155,7 @@ const msgtxt : array[0..000274,1..240] of char=(
   'Supported FPU instruction sets:'#010+
   '  $FPUINSTRUCTIONSETS'#010+
   #010+
-  'Supported ABI tar','gets:'#010+
+  'Supported ABI ta','rgets:'#010+
   '  $ABITARGETS'#010+
   #010+
   'Supported Optimizations:'#010+
@@ -1169,47 +1169,47 @@ const msgtxt : array[0..000274,1..240] of char=(
   '  $CONTROLLERTYPES'#010+
   #010+
   'This program comes under the GNU General Public Licence'#010+
-  'Fo','r more information read COPYING.v2'#010+
+  'F','or more information read COPYING.v2'#010+
   #010+
   'Please report bugs in our bug tracker on:'#010+
   '                 http://bugs.freepascal.org'#010+
   #010+
   'More information may be found on our WWW pages (including directions'#010+
-  'for mailing lists useful for asking questions or',' discussing potentia'+
+  'for mailing lists useful for asking questions o','r discussing potentia'+
   'l'#010+
   'new features, etc.):'#010+
   '                 http://www.freepascal.org'#000+
   '11025_**0*_Put + after a boolean switch option to enable it, - to disa'+
   'ble it'#010+
   '**1a_The compiler doesn'#039't delete the generated assembler file'#010+
-  '**2al_List sour','cecode lines in assembler file'#010+
+  '**2al_List sou','rcecode lines in assembler file'#010+
   '**2an_List node info in assembler file (-dEXTDEBUG compiler)'#010+
   '*L2ap_Use pipes instead of creating temporary assembler files'#010+
   '**2ar_List register allocation/release info in assembler file'#010+
-  '**2at_List temp allocati','on/release info in assembler file'#010+
+  '**2at_List temp allocat','ion/release info in assembler file'#010+
   '**1A<x>_Output format:'#010+
   '**2Adefault_Use default assembler'#010+
   '3*2Aas_Assemble using GNU AS'#010+
   '3*2Amacho_Mach-O (Darwin, Intel 32 bit) using internal writer'#010+
   '3*2Anasmcoff_COFF (Go32v2) file using Nasm'#010+
-  '3*2Anasmelf_ELF','32 (Linux) file using Nasm'#010+
+  '3*2Anasmelf_EL','F32 (Linux) file using Nasm'#010+
   '3*2Anasmwin32_Win32 object file using Nasm'#010+
   '3*2Anasmwdosx_Win32/WDOSX object file using Nasm'#010+
   '3*2Awasm_Obj file using Wasm (Watcom)'#010+
   '3*2Anasmobj_Obj file using Nasm'#010+
   '3*2Amasm_Obj file using Masm (Microsoft)'#010+
-  '3*2Atasm_O','bj file using Tasm (Borland)'#010+
+  '3*2Atasm_','Obj file using Tasm (Borland)'#010+
   '3*2Aelf_ELF (Linux) using internal writer'#010+
   '3*2Acoff_COFF (Go32v2) using internal writer'#010+
   '3*2Apecoff_PE-COFF (Win32) using internal writer'#010+
   '4*2Aas_Assemble using GNU AS'#010+
   '4*2Agas_Assemble using GNU GAS'#010+
-  '4*2Agas-darwin_','Assemble darwin Mach-O64 using GNU GAS'#010+
+  '4*2Agas-darwin','_Assemble darwin Mach-O64 using GNU GAS'#010+
   '4*2Amasm_Win64 object file using ml64 (Microsoft)'#010+
   '4*2Apecoff_PE-COFF (Win64) using internal writer'#010+
   '4*2Aelf_ELF (Linux-64bit) using internal writer'#010+
   '6*2Aas_Unix o-file using GNU AS'#010+
-  '6*2Agas_GNU Motorola a','ssembler'#010+
+  '6*2Agas_GNU Motorola ','assembler'#010+
   '6*2Amit_MIT Syntax (old GAS)'#010+
   '6*2Amot_Standard Motorola assembler'#010+
   'A*2Aas_Assemble using GNU AS'#010+
@@ -1217,47 +1217,47 @@ const msgtxt : array[0..000274,1..240] of char=(
   'S*2Aas_Assemble using GNU AS'#010+
   '**1b_Generate browser info'#010+
   '**2bl_Generate local symbol info'#010+
-  '**1B_Build all modu','les'#010+
+  '**1B_Build all mod','ules'#010+
   '**1C<x>_Code generation options:'#010+
   '**2C3<x>_Turn on ieee error checking for constants'#010+
   '**2Ca<x>_Select ABI, see fpc -i for possible values'#010+
   '**2Cb_Generate big-endian code'#010+
   '**2Cc<x>_Set default calling convention to <x>'#010+
-  '**2CD_Create also dyna','mic library (not supported)'#010+
+  '**2CD_Create also dyn','amic library (not supported)'#010+
   '**2Ce_Compilation with emulated floating point opcodes'#010+
   '**2Cf<x>_Select fpu instruction set to use, see fpc -i for possible va'+
   'lues'#010+
   '**2CF<x>_Minimal floating point constant precision (default, 32, 64)'#010+
-  '**2Cg_Generat','e PIC code'#010+
+  '**2Cg_Genera','te PIC code'#010+
   '**2Ch<n>_<n> bytes heap (between 1023 and 67107840)'#010+
   '**2Ci_IO-checking'#010+
   '**2Cn_Omit linking stage'#010+
   'P*2CN_Generate nil-pointer checks (AIX-only)'#010+
   '**2Co_Check overflow of integer operations'#010+
-  '**2CO_Check for possible overflow of integer o','perations'#010+
+  '**2CO_Check for possible overflow of integer ','operations'#010+
   '**2Cp<x>_Select instruction set, see fpc -i for possible values'#010+
   '**2CP<x>=<y>_ packing settings'#010+
   '**3CPPACKSET=<y>_ <y> set allocation: 0, 1 or DEFAULT or NORMAL, 2, 4 '+
   'and 8'#010+
   '**2Cr_Range checking'#010+
-  '**2CR_Verify object method call validi','ty'#010+
+  '**2CR_Verify object method call valid','ity'#010+
   '**2Cs<n>_Set stack checking size to <n>'#010+
   '**2Ct_Stack checking (for testing only, see manual)<<<<<<< HEAD'#010+
   'p*2CT<x>_Target-specific code generation options'#010+
   'P*2CT<x>_Target-specific code generation options'#010+
-  'J*2CT<x>_Target-specific code gener','ation options'#010+
+  'J*2CT<x>_Target-specific code gene','ration options'#010+
   'p*3CTsmalltoc_ Generate smaller TOCs at the expense of execution speed'+
   ' (AIX)'#010+
   'P*3CTsmalltoc_ Generate smaller TOCs at the expense of execution speed'+
   ' (AIX)'#010+
   'J*3CTcompactintarrayinit_ Generate smaller (but potentially slower) co'+
-  'de',' for initializing integer array constants'#010+
+  'd','e for initializing integer array constants'#010+
   'J*2Cv_Var/out parameter copy-out checking'#010+
   '**2CX_Create also smartlinked library'#010+
   '**1d<x>_Defines the symbol <x>'#010+
   '**1D_Generate a DEF file'#010+
   '**2Dd<x>_Set description to <x>'#010+
-  '**2Dv<x>_Set DLL version to <x','>'#010+
+  '**2Dv<x>_Set DLL version to <','x>'#010+
   '*O2Dw_PM application'#010+
   '**1e<x>_Set path to executable'#010+
   '**1E_Same as -Cn'#010+
@@ -1266,89 +1266,89 @@ const msgtxt : array[0..000274,1..240] of char=(
   '**2Fa<x>[,y]_(for a program) load units <x> and [y] before uses is par'+
   'sed'#010+
   '**2Fc<x>_Set input codepage to <x>'#010+
-  '**2FC<','x>_Set RC compiler binary name to <x>'#010+
+  '**2FC','<x>_Set RC compiler binary name to <x>'#010+
   '**2Fd_Disable the compiler'#039's internal directory cache'#010+
   '**2FD<x>_Set the directory where to search for compiler utilities'#010+
   '**2Fe<x>_Redirect error output to <x>'#010+
-  '**2Ff<x>_Add <x> to framework path (Darwin o','nly)'#010+
+  '**2Ff<x>_Add <x> to framework path (Darwin ','only)'#010+
   '**2FE<x>_Set exe/unit output path to <x>'#010+
   '**2Fi<x>_Add <x> to include path'#010+
   '**2Fl<x>_Add <x> to library path'#010+
   '**2FL<x>_Use <x> as dynamic linker'#010+
   '**2Fm<x>_Load unicode conversion table from <x>.txt in the compiler di'+
   'r'#010+
-  '**2Fo<x>_Add <x> to o','bject path'#010+
+  '**2Fo<x>_Add <x> to ','object path'#010+
   '**2Fr<x>_Load error message file <x>'#010+
   '**2FR<x>_Set resource (.res) linker to <x>'#010+
   '**2Fu<x>_Add <x> to unit path'#010+
   '**2FU<x>_Set unit output path to <x>, overrides -FE'#010+
-  '**2FW<x>_Store generated whole-program optimization feedback in <x>',#010+
+  '**2FW<x>_Store generated whole-program optimization feedback in <x','>'#010+
   '**2Fw<x>_Load previously stored whole-program optimization feedback fr'+
   'om <x>'#010+
   '*g1g_Generate debug information (default format for target)'#010+
   '*g2gc_Generate checks for pointers'#010+
   '*g2gh_Use heaptrace unit (for memory leak/corruption debugging)'#010+
-  '*g2','gl_Use line info unit (show more info with backtraces)'#010+
+  '*g','2gl_Use line info unit (show more info with backtraces)'#010+
   '*g2go<x>_Set debug information options'#010+
   '*g3godwarfsets_ Enable DWARF '#039'set'#039' type debug information (bre'+
   'aks gdb < 6.5)'#010+
-  '*g3gostabsabsincludes_ Store absolute/full include file paths in Stab',
+  '*g3gostabsabsincludes_ Store absolute/full include file paths in Sta','b'+
   's'#010+
   '*g3godwarfmethodclassprefix_ Prefix method names in DWARF with class n'+
   'ame'#010+
   '*g2gp_Preserve case in stabs symbol names'#010+
   '*g2gs_Generate Stabs debug information'#010+
   '*g2gt_Trash local variables (to detect uninitialized uses)'#010+
-  '*g2gv_Generates programs',' traceable with Valgrind'#010+
+  '*g2gv_Generates program','s traceable with Valgrind'#010+
   '*g2gw_Generate DWARFv2 debug information (same as -gw2)'#010+
   '*g2gw2_Generate DWARFv2 debug information'#010+
   '*g2gw3_Generate DWARFv3 debug information'#010+
   '*g2gw4_Generate DWARFv4 debug information (experimental)'#010+
-  '**1i_Information'#010+
-  '*','*2iD_Return compiler date'#010+
+  '**1i_Information'#010,
+  '**2iD_Return compiler date'#010+
   '**2iV_Return short compiler version'#010+
   '**2iW_Return full compiler version'#010+
   '**2iSO_Return compiler OS'#010+
   '**2iSP_Return compiler host processor'#010+
   '**2iTO_Return target OS'#010+
   '**2iTP_Return target processor'#010+
-  '**1I<x>_Add <x> to inclu','de path'#010+
+  '**1I<x>_Add <x> to incl','ude path'#010+
   '**1k<x>_Pass <x> to the linker'#010+
   '**1l_Write logo'#010+
   '**1M<x>_Set language mode to <x>'#010+
   '**2Mfpc_Free Pascal dialect (default)'#010+
   '**2Mobjfpc_FPC mode with Object Pascal support'#010+
   '**2Mdelphi_Delphi 7 compatibility mode'#010+
-  '**2Mtp_TP/BP 7.0 compatibili','ty mode'#010+
+  '**2Mtp_TP/BP 7.0 compatibil','ity mode'#010+
   '**2Mmacpas_Macintosh Pascal dialects compatibility mode'#010+
   '**1n_Do not read the default config files'#010+
   '**1N<x>_Node tree optimizations'#010+
   '**2Nu_Unroll loops'#010+
   '**1o<x>_Change the name of the executable produced to <x>'#010+
   '**1O<x>_Optimizations:'#010+
-  '**','2O-_Disable optimizations'#010+
+  '*','*2O-_Disable optimizations'#010+
   '**2O1_Level 1 optimizations (quick and debugger friendly)'#010+
   '**2O2_Level 2 optimizations (-O1 + quick optimizations)'#010+
   '**2O3_Level 3 optimizations (-O2 + slow optimizations)'#010+
   '**2Oa<x>=<y>_Set alignment'#010+
-  '**2Oo[NO]<x>_Enabl','e or disable optimizations, see fpc -i for possibl'+
+  '**2Oo[NO]<x>_Enab','le or disable optimizations, see fpc -i for possibl'+
   'e values'#010+
   '**2Op<x>_Set target cpu for optimizing, see fpc -i for possible values'+
   #010+
   '**2OW<x>_Generate whole-program optimization feedback for optimization'+
   ' <x>, see fpc -i for possible values'#010+
-  '**2','Ow<x>_Perform whole-program optimization <x>, see fpc -i for poss'+
+  '**','2Ow<x>_Perform whole-program optimization <x>, see fpc -i for poss'+
   'ible values'#010+
   '**2Os_Optimize for size rather than speed'#010+
   '**1pg_Generate profile code for gprof (defines FPC_PROFILE)'#010+
   'F*1P<x>_Target CPU / compiler related options:'#010+
-  'F*2PB_Show def','ault compiler binary'#010+
+  'F*2PB_Show de','fault compiler binary'#010+
   'F*2PP_Show default target cpu'#010+
   'F*2P<x>_Set target CPU (arm,i386,m68k,mips,mipsel,powerpc,powerpc64,sp'+
   'arc,x86_64'#010+
   '**1R<x>_Assembler reading style:'#010+
   '**2Rdefault_Use default assembler for target'#010+
-  '3*2Ratt_Read AT&T style assemb','ler'#010+
+  '3*2Ratt_Read AT&T style assem','bler'#010+
   '3*2Rintel_Read Intel style assembler'#010+
   '6*2RMOT_Read motorola style assembler'#010+
   '**1S<x>_Syntax options:'#010+
@@ -1356,34 +1356,34 @@ const msgtxt : array[0..000274,1..240] of char=(
   '**2Sc_Support operators like C (*=,+=,/= and -=)'#010+
   '**2Sa_Turn on assertions'#010+
   '**2Sd_Same as -Mdelphi'#010+
-  '**2Se<x>_Error op','tions. <x> is a combination of the following:'#010+
+  '**2Se<x>_Error o','ptions. <x> is a combination of the following:'#010+
   '**3*_<n> : Compiler halts after the <n> errors (default is 1)'#010+
   '**3*_w : Compiler also halts after warnings'#010+
   '**3*_n : Compiler also halts after notes'#010+
   '**3*_h : Compiler also halts after hints'#010+
-  '**2Sg_','Enable LABEL and GOTO (default in -Mtp and -Mdelphi)'#010+
+  '**2Sg','_Enable LABEL and GOTO (default in -Mtp and -Mdelphi)'#010+
   '**2Sh_Use reference counted strings (ansistring by default) instead of'+
   ' shortstrings'#010+
   '**2Si_Turn on inlining of procedures/functions declared as "inline"'#010+
   '**2Sk_Load fpcylix unit'#010+
-  '**2SI<x>_Se','t interface style to <x>'#010+
+  '**2SI<x>_S','et interface style to <x>'#010+
   '**3SIcom_COM compatible interface (default)'#010+
   '**3SIcorba_CORBA compatible interface'#010+
   '**2Sm_Support macros like C (global)'#010+
   '**2So_Same as -Mtp'#010+
   '**2Ss_Constructor name must be init (destructor must be done)'#010+
-  '**2Sx_Enable ex','ception keywords (default in Delphi/ObjFPC modes)'#010+
+  '**2Sx_Enable e','xception keywords (default in Delphi/ObjFPC modes)'#010+
   '**2Sy_@<pointer> returns a typed pointer, same as $T+'#010+
   '**1s_Do not call assembler and linker'#010+
   '**2sh_Generate script to link on host'#010+
   '**2st_Generate script to link on target'#010+
-  '**2sr_Skip register ','allocation phase (use with -alr)'#010+
+  '**2sr_Skip register',' allocation phase (use with -alr)'#010+
   '**1T<x>_Target operating system:'#010+
   '3*2Tdarwin_Darwin/Mac OS X'#010+
   '3*2Temx_OS/2 via EMX (including EMX/RSX extender)'#010+
   '3*2Tfreebsd_FreeBSD'#010+
   '3*2Tgo32v2_Version 2 of DJ Delorie DOS extender'#010+
-  '3*2Tiphonesim_ iPhoneSimulato','r from iOS SDK 3.2+ (older versions: -T'+
+  '3*2Tiphonesim_ iPhoneSimulat','or from iOS SDK 3.2+ (older versions: -T'+
   'darwin)'#010+
   '3*2Tlinux_Linux'#010+
   '3*2Tnetbsd_NetBSD'#010+
@@ -1392,7 +1392,7 @@ const msgtxt : array[0..000274,1..240] of char=(
   '3*2Topenbsd_OpenBSD'#010+
   '3*2Tos2_OS/2 / eComStation'#010+
   '3*2Tsunos_SunOS/Solaris'#010+
-  '3*2Ts','ymbian_Symbian OS'#010+
+  '3*2T','symbian_Symbian OS'#010+
   '3*2Tsolaris_Solaris'#010+
   '3*2Twatcom_Watcom compatible DOS extender'#010+
   '3*2Twdosx_WDOSX DOS extender'#010+
@@ -1400,8 +1400,8 @@ const msgtxt : array[0..000274,1..240] of char=(
   '3*2Twince_Windows CE'#010+
   '4*2Tdarwin_Darwin/Mac OS X'#010+
   '4*2Tlinux_Linux'#010+
-  '4*2Twin64_Win64 (64 bit Windows systems)'#010+
-  '6','*2Tamiga_Commodore Amiga'#010+
+  '4*2Twin64_Win64 (64 bit Windows systems)'#010,
+  '6*2Tamiga_Commodore Amiga'#010+
   '6*2Tatari_Atari ST/STe/TT'#010+
   '6*2Tlinux_Linux'#010+
   '6*2Tpalmos_PalmOS'#010+
@@ -1411,7 +1411,7 @@ const msgtxt : array[0..000274,1..240] of char=(
   'P*2Tamiga_AmigaOS'#010+
   'P*2Tdarwin_Darwin/Mac OS X'#010+
   'P*2Tlinux_Linux'#010+
-  'P*2Tmacos_Mac OS (classic)',#010+
+  'P*2Tmacos_Mac OS (classic',')'#010+
   'P*2Tmorphos_MorphOS'#010+
   'S*2Tsolaris_Solaris'#010+
   'S*2Tlinux_Linux'#010+
@@ -1419,110 +1419,110 @@ const msgtxt : array[0..000274,1..240] of char=(
   '**1U_Unit options:'#010+
   '**2Un_Do not check where the unit name matches the file name'#010+
   '**2Ur_Generate release unit files (never automatically recompiled)'#010+
-  '**2','Us_Compile a system unit'#010+
+  '**','2Us_Compile a system unit'#010+
   '**1v<x>_Be verbose. <x> is a combination of the following letters:'#010+
   '**2*_e : Show errors (default)       0 : Show nothing (except errors)'#010+
   '**2*_w : Show warnings               u : Show unit info'#010+
-  '**2*_n : Show notes   ','               t : Show tried/used files'#010+
+  '**2*_n : Show notes  ','                t : Show tried/used files'#010+
   '**2*_h : Show hints                  c : Show conditionals'#010+
   '**2*_i : Show general info           d : Show debug info'#010+
   '**2*_l : Show linenumbers            r : Rhide/GCC compatibility mode'#010+
-  '**2*_s : Show',' time stamps            q : Show message numbers'#010+
+  '**2*_s : Sho','w time stamps            q : Show message numbers'#010+
   '**2*_a : Show everything             x : Executable info (Win32 only)'#010+
   '**2*_b : Write file names messages   p : Write tree.log with parse tre'+
   'e'#010+
-  '**2*_    with full path              v : Write fp','cdebug.txt with'#010+
+  '**2*_    with full path              v : Write f','pcdebug.txt with'#010+
   '**2*_                                    lots of debugging info'#010+
   '**2*_m<x>,<y> : Don'#039't show messages numbered <x> and <y>'#010+
   'F*1V<x>_Append '#039'-<x>'#039' to the used compiler binary name (e.g. f'+
   'or version)'#010+
-  '**1W<x>_Target-specific optio','ns (targets)'#010+
+  '**1W<x>_Target-specific opti','ons (targets)'#010+
   '3*2WA_Specify native type application (Windows)'#010+
   '4*2WA_Specify native type application (Windows)'#010+
   'A*2WA_Specify native type application (Windows)'#010+
   '3*2Wb_Create a bundle instead of a library (Darwin)'#010+
-  'P*2Wb_Create a bundle instead o','f a library (Darwin)'#010+
+  'P*2Wb_Create a bundle instead ','of a library (Darwin)'#010+
   'p*2Wb_Create a bundle instead of a library (Darwin)'#010+
   'A*2Wb_Create a bundle instead of a library (Darwin)'#010+
   '4*2Wb_Create a bundle instead of a library (Darwin)'#010+
   '3*2WB_Create a relocatable image (Windows, Symbian)'#010+
-  '3*2WBxxxx_S','et image base to xxxx (Windows, Symbian)'#010+
+  '3*2WBxxxx_','Set image base to xxxx (Windows, Symbian)'#010+
   '4*2WB_Create a relocatable image (Windows)'#010+
   '4*2WBxxxx_Set image base to xxxx (Windows)'#010+
   'A*2WB_Create a relocatable image (Windows, Symbian)'#010+
   'A*2WBxxxx_Set image base to xxxx (Windows, Symbian)'#010+
-  '3*2WC_Spe','cify console type application (EMX, OS/2, Windows)'#010+
+  '3*2WC_Sp','ecify console type application (EMX, OS/2, Windows)'#010+
   '4*2WC_Specify console type application (EMX, OS/2, Windows)'#010+
   'A*2WC_Specify console type application (Windows)'#010+
   'P*2WC_Specify console type application (Classic Mac OS)'#010+
-  '3*2WD_Use DEFFILE to exp','ort functions of DLL or EXE (Windows)'#010+
+  '3*2WD_Use DEFFILE to ex','port functions of DLL or EXE (Windows)'#010+
   '4*2WD_Use DEFFILE to export functions of DLL or EXE (Windows)'#010+
   'A*2WD_Use DEFFILE to export functions of DLL or EXE (Windows)'#010+
   '3*2We_Use external resources (Darwin)'#010+
   '4*2We_Use external resources (Darwin)'#010+
-  'A*','2We_Use external resources (Darwin)'#010+
+  'A','*2We_Use external resources (Darwin)'#010+
   'P*2We_Use external resources (Darwin)'#010+
   'p*2We_Use external resources (Darwin)'#010+
   '3*2WF_Specify full-screen type application (EMX, OS/2)'#010+
   '3*2WG_Specify graphic type application (EMX, OS/2, Windows)'#010+
-  '4*2WG_Specify',' graphic type application (EMX, OS/2, Windows)'#010+
+  '4*2WG_Specif','y graphic type application (EMX, OS/2, Windows)'#010+
   'A*2WG_Specify graphic type application (Windows)'#010+
   'P*2WG_Specify graphic type application (Classic Mac OS)'#010+
   '3*2Wi_Use internal resources (Darwin)'#010+
   '4*2Wi_Use internal resources (Darwin)'#010+
-  'A*2Wi_Use in','ternal resources (Darwin)'#010+
+  'A*2Wi_Use i','nternal resources (Darwin)'#010+
   'P*2Wi_Use internal resources (Darwin)'#010+
   'p*2Wi_Use internal resources (Darwin)'#010+
   '3*2WI_Turn on/off the usage of import sections (Windows)'#010+
   '4*2WI_Turn on/off the usage of import sections (Windows)'#010+
-  'A*2WI_Turn on/off the us','age of import sections (Windows)'#010+
+  'A*2WI_Turn on/off the u','sage of import sections (Windows)'#010+
   '3*2WM<x>_Minimum Mac OS X deployment version: 10.4, 10.5.1, ... (Darwi'+
   'n)'#010+
   '4*2WM<x>_Minimum Mac OS X deployment version: 10.4, 10.5.1, ... (Darwi'+
   'n)'#010+
-  'p*2WM<x>_Minimum Mac OS X deployment version: 10.4, 10.5.1, .','.. (Dar'+
+  'p*2WM<x>_Minimum Mac OS X deployment version: 10.4, 10.5.1, ','... (Dar'+
   'win)'#010+
   'P*2WM<x>_Minimum Mac OS X deployment version: 10.4, 10.5.1, ... (Darwi'+
   'n)'#010+
   '3*2WN_Do not generate relocation code, needed for debugging (Windows)'#010+
   '4*2WN_Do not generate relocation code, needed for debugging (Windows)'#010+
-  'A*2WN_Do not ge','nerate relocation code, needed for debugging (Windows'+
+  'A*2WN_Do not g','enerate relocation code, needed for debugging (Windows'+
   ')'#010+
   'A*2Wpxxxx_Specify the controller type, see fpc -i for possible values'#010+
   'V*2Wpxxxx_Specify the controller type, see fpc -i for possible values'#010+
-  '3*2WP<x>_Minimum iOS deployment version: 3.0,',' 5.0.1, ... (iphonesim)'+
+  '3*2WP<x>_Minimum iOS deployment version: 3.0',', 5.0.1, ... (iphonesim)'+
   #010+
   'A*2WP<x>_Minimum iOS deployment version: 3.0, 5.0.1, ... (Darwin)'#010+
   '3*2WR_Generate relocation code (Windows)'#010+
   '4*2WR_Generate relocation code (Windows)'#010+
   'A*2WR_Generate relocation code (Windows)'#010+
-  'P*2WT_Specify MPW tool type',' application (Classic Mac OS)'#010+
+  'P*2WT_Specify MPW tool typ','e application (Classic Mac OS)'#010+
   '**2WX_Enable executable stack (Linux)'#010+
   '**1X_Executable options:'#010+
   '**2Xc_Pass --shared/-dynamic to the linker (BeOS, Darwin, FreeBSD, Lin'+
   'ux)'#010+
   '**2Xd_Do not search default library path (sometimes required for cross'+
-  '-co','mpiling when not using -XR)'#010+
+  '-c','ompiling when not using -XR)'#010+
   '**2Xe_Use external linker'#010+
   '**2Xg_Create debuginfo in a separate file and add a debuglink section '+
   'to executable'#010+
   '**2XD_Try to link units dynamically      (defines FPC_LINK_DYNAMIC)'#010+
   '**2Xi_Use internal linker'#010+
-  '**2Xm_Ge','nerate link map'#010+
+  '**2Xm_G','enerate link map'#010+
   '**2XM<x>_Set the name of the '#039'main'#039' program routine (default i'+
   's '#039'main'#039')'#010+
   'F*2Xp<x>_First search for the compiler binary in the directory <x>'#010+
   '**2XP<x>_Prepend the binutils names with the prefix <x>'#010+
-  '**2Xr<x>_Set the linker'#039's rli','nk-path to <x> (needed for cross co'+
+  '**2Xr<x>_Set the linker'#039's rl','ink-path to <x> (needed for cross co'+
   'mpile, see the ld manual for more information) (BeOS, Linux)'#010+
   '**2XR<x>_Prepend <x> to all linker search paths (BeOS, Darwin, FreeBSD'+
   ', Linux, Mac OS, Solaris)'#010+
   '**2Xs_Strip all symbols from executable'#010+
-  '**2XS_Tr','y to link units statically (default, defines FPC_LINK_STATIC'+
+  '**2XS_T','ry to link units statically (default, defines FPC_LINK_STATIC'+
   ')'#010+
   '**2Xt_Link with static libraries (-static is passed to linker)'#010+
   '**2XX_Try to smartlink units             (defines FPC_LINK_SMART)'#010+
   '**1*_'#010+
   '**1?_Show this help'#010+
-  '**1h_Shows this help wi','thout waiting'
+  '**1h_Shows this help w','ithout waiting'
 );

compiler/scandir.pas

@@ -1268,7 +1268,6 @@ unit scandir;
       $warn <identifier> on
       $warn <identifier> off
       $warn <identifier> error
-      not implemented yet
     }
     procedure dir_warn;
       var
@@ -1360,6 +1359,9 @@ unit scandir;
         else
         if ident='CVT_NARROWING_STRING_LOST' then
           recordpendingmessagestate(type_w_unicode_data_loss, msgstate)
+        else
+        if ident='INTF_RAISE_VISIBILITY' then
+          recordpendingmessagestate(type_w_interface_lower_visibility, msgstate)
         else
           begin
             i:=0;