+ added warning if source or destination for x86 string instructions isn't

  specified to be (%esi) or (%edi), when using at&t syntax assembler (this is
  not considered an error by intel syntax assemblers, so we're not adding a
  warning there, for now)

git-svn-id: trunk@37458 -

compiler/msg/errore.msg

@@ -2483,7 +2483,7 @@ cg_f_max_units_reached=06057_F_Maximum number of units ($1) reached for the curr
 #
 # Assembler reader
 #
-# 07132 is the last used one
+# 07133 is the last used one
 #
 asmr_d_start_reading=07000_DL_Starting $1 styled assembler parsing
 % This informs you that an assembler block is being parsed
@@ -2804,6 +2804,11 @@ asmr_w_unable_to_determine_constant_size_using_word=07131_W_No size specified an
 % the compiler is unable to determine what size (byte, word, dword, etc.) it
 % should use for the constant. Based on its value, WORD is used.
 asmr_e_cannot_override_es_segment=07132_E_Cannot override ES segment
+% The ES segment in the ES:[EDI] reference of the x86 string instructions
+% cannot be overridden.
+asmr_w_invalid_reference=07133_W_Reference is not valid here (expected "$1")
+% Certain x86 instructions require a fixed source or destination reference
+% (e.g. [ESI] or [EDI] for the string instructions source and destination)
 #
 # Assembler/binary writers
 #

compiler/msgidx.inc

@@ -814,6 +814,7 @@ const
   asmr_w_unable_to_determine_constant_size_using_byte=07130;
   asmr_w_unable_to_determine_constant_size_using_word=07131;
   asmr_e_cannot_override_es_segment=07132;
+  asmr_w_invalid_reference=07133;
   asmw_f_too_many_asm_files=08000;
   asmw_f_assembler_output_not_supported=08001;
   asmw_f_comp_not_supported=08002;
@@ -1084,9 +1085,9 @@ const
   option_info=11024;
   option_help_pages=11025;
 
-  MsgTxtSize = 80564;
+  MsgTxtSize = 80616;
 
   MsgIdxMax : array[1..20] of longint=(
-    27,105,347,124,96,58,133,33,221,67,
+    27,105,347,124,96,58,134,33,221,67,
     60,20,30,1,1,1,1,1,1,1
   );

compiler/msgtxt.inc

@@ -1000,336 +1000,337 @@ const msgtxt : array[0..000335,1..240] of char=(
   '07131_W_No size specified and unable to determine the size of the cons'+
   'tant, using WORD as default'#000+
   '07132_E_Cannot override ES segment'#000+
-  '08000_F_Too many ','assembler files'#000+
+  '07133_W_Reference',' is not valid here (expected "$1")'#000+
+  '08000_F_Too many assembler files'#000+
   '08001_F_Selected assembler output not supported'#000+
   '08002_F_Comp not supported'#000+
   '08003_F_Direct not support for binary writers'#000+
-  '08004_E_Allocating of data is only allowed in bss section'#000+
+  '08004_E_Allocating of data is only allowed in bss s','ection'#000+
   '08005_F_No binary writer selected'#000+
-  '08006_E_Asm',': Opcode $1 not in table'#000+
+  '08006_E_Asm: Opcode $1 not in table'#000+
   '08007_E_Asm: $1 invalid combination of opcode and operands'#000+
   '08008_E_Asm: 16 Bit references not supported'#000+
   '08009_E_Asm: Invalid effective address'#000+
-  '08010_E_Asm: Immediate or reference expected'#000+
-  '08011_E_Asm: $1 value excee','ds bounds $2'#000+
+  '08010_E_Asm: Immedia','te or reference expected'#000+
+  '08011_E_Asm: $1 value exceeds bounds $2'#000+
   '08012_E_Asm: Short jump is out of range $1'#000+
   '08013_E_Asm: Undefined label $1'#000+
   '08014_E_Asm: Comp type not supported for this target'#000+
-  '08015_E_Asm: Extended type not supported for this target'#000+
+  '08015_E_Asm: Extended type not supported for th','is target'#000+
   '08016_E_Asm: Duplicate label $1'#000+
-  '08017_E_As','m: Redefined label $1'#000+
+  '08017_E_Asm: Redefined label $1'#000+
   '08018_E_Asm: First defined here'#000+
   '08019_E_Asm: Invalid register $1'#000+
   '08020_E_Asm: 16 or 32 Bit references not supported'#000+
   '08021_E_Asm: 64 Bit operands not supported'#000+
-  '08022_E_Asm: AH,BH,CH or DH cannot be used in an instructio','n requiri'+
+  '08022_E','_Asm: AH,BH,CH or DH cannot be used in an instruction requiri'+
   'ng REX prefix'#000+
   '08023_E_Missing .seh_endprologue directive'#000+
   '08024_E_Function prologue exceeds 255 bytes'#000+
   '08025_E_.seh_handlerdata directive without preceding .seh_handler'#000+
-  '08026_F_Relocation count for section $1 exceeds 65535'#000+
-  '08027_N_Ch','ange of bind type of symbol $1 from $2 to $3 after use'#000+
+  '08026_F_Relo','cation count for section $1 exceeds 65535'#000+
+  '08027_N_Change of bind type of symbol $1 from $2 to $3 after use'#000+
   '08028_H_Change of bind type of symbol $1 from $2 to $3 after use'#000+
   '08029_E_Asm: 32 Bit references not supported'#000+
-  '08030_F_Code segment too large'#000+
+  '08030_F_Code segment to','o large'#000+
   '08031_F_Data segment too large'#000+
-  '08032_E_Instr','uction not supported by the selected instruction set'#000+
+  '08032_E_Instruction not supported by the selected instruction set'#000+
   '09000_W_Source operating system redefined'#000+
   '09001_I_Assembling (pipe) $1'#000+
   '09002_E_Can'#039't create assembler file: $1'#000+
-  '09003_E_Can'#039't create object file: $1 (error code: $2)'#000+
-  '09004_E_Can'#039't create a','rchive file: $1'#000+
+  '09003_E_Can'#039't create obj','ect file: $1 (error code: $2)'#000+
+  '09004_E_Can'#039't create archive file: $1'#000+
   '09005_E_Assembler $1 not found, switching to external assembling'#000+
   '09006_T_Using assembler: $1'#000+
   '09007_E_Error while assembling exitcode $1'#000+
-  '09008_E_Can'#039't call the assembler, error $1 switching to external a'+
-  'ssembling'#000+
-  '09009_I_Asse','mbling $1'#000+
+  '09008_E_Can'#039't call the assembler, er','ror $1 switching to external'+
+  ' assembling'#000+
+  '09009_I_Assembling $1'#000+
   '09010_I_Assembling with smartlinking $1'#000+
   '09011_W_Object $1 not found, Linking may fail !'#000+
   '09012_W_Library $1 not found, Linking may fail !'#000+
   '09013_E_Error while linking'#000+
-  '09014_E_Can'#039't call the linker, switching to external linking'#000+
-  '0901','5_I_Linking $1'#000+
+  '09014_E_Can'#039't',' call the linker, switching to external linking'#000+
+  '09015_I_Linking $1'#000+
   '09016_E_Util $1 not found, switching to external linking'#000+
   '09017_T_Using util $1'#000+
   '09018_E_Creation of Executables not supported'#000+
-  '09019_E_Creation of Dynamic/Shared Libraries not supported'#000+
-  '09035_E_Creation of Static Libraries not ','supported'#000+
+  '09019_E_Creation of Dynamic/Shared Libraries not',' supported'#000+
+  '09035_E_Creation of Static Libraries not supported'#000+
   '09020_I_Closing script $1'#000+
   '09021_E_resource compiler "$1" not found, switching to external mode'#000+
   '09022_I_Compiling resource $1'#000+
-  '09023_T_unit $1 cannot be statically linked, switching to smart linkin'+
-  'g'#000+
-  '09024_T_unit $1 cannot be smart l','inked, switching to static linking'#000+
+  '09023_T_unit $1 cannot be statically linked, switchin','g to smart link'+
+  'ing'#000+
+  '09024_T_unit $1 cannot be smart linked, switching to static linking'#000+
   '09025_T_unit $1 cannot be shared linked, switching to static linking'#000+
   '09026_E_unit $1 cannot be smart or static linked'#000+
-  '09027_E_unit $1 cannot be shared or static linked'#000+
-  '09028_D_Calling resource compiler "$1','" with "$2" as command line'#000+
+  '09027_E_unit $1 cannot be shared or',' static linked'#000+
+  '09028_D_Calling resource compiler "$1" with "$2" as command line'#000+
   '09029_E_Error while compiling resources'#000+
   '09030_E_Can'#039't call the resource compiler "$1", switching to extern'+
   'al mode'#000+
   '09031_E_Can'#039't open resource file "$1"'#000+
-  '09032_E_Can'#039't write resource file "$1"'#000+
-  '09033_N_File "$1" not',' found for backquoted cat command'#000+
+  '09032_E_','Can'#039't write resource file "$1"'#000+
+  '09033_N_File "$1" not found for backquoted cat command'#000+
   '09034_W_"$1" not found, this will probably cause a linking failure'#000+
   '09128_F_Can'#039't post process executable $1'#000+
   '09129_F_Can'#039't open executable $1'#000+
-  '09130_X_Size of Code: $1 bytes'#000+
-  '09131_X_Size of initialized data: ','$1 bytes'#000+
+  '09130_X_Size ','of Code: $1 bytes'#000+
+  '09131_X_Size of initialized data: $1 bytes'#000+
   '09132_X_Size of uninitialized data: $1 bytes'#000+
   '09133_X_Stack space reserved: $1 bytes'#000+
   '09134_X_Stack space committed: $1 bytes'#000+
-  '09200_F_Executable image size is too big for $1 target.'#000+
-  '09201_W_Object file "$1" contains 32-bit absolute r','elocation to symb'+
-  'ol "$2".'#000+
+  '09200_F_Executable image size is too big for $1 target.',#000+
+  '09201_W_Object file "$1" contains 32-bit absolute relocation to symbol'+
+  ' "$2".'#000+
   '09202_E_Program segment too large (exceeds 64k by $1 bytes)'#000+
   '09203_E_Code segment "$1" too large (exceeds 64k by $2 bytes)'#000+
-  '09204_E_Data segment "$1" too large (exceeds 64k by $2 bytes)'#000+
-  '09205_E_Segment "$1" too large',' (exceeds 64k by $2 bytes)'#000+
+  '09204_E_Data segment "$1" too large (exc','eeds 64k by $2 bytes)'#000+
+  '09205_E_Segment "$1" too large (exceeds 64k by $2 bytes)'#000+
   '09206_E_Group "$1" too large (exceeds 64k by $2 bytes)'#000+
   '09207_E_Cannot create a .COM file, because the program contains segmen'+
   't relocations'#000+
-  '09208_W_Program "$1" uses experimental CheckPointer option'#000+
-  '09209_E_Multipl','e defined symbol "$1"'#000+
+  '09208_W_Program "$1" u','ses experimental CheckPointer option'#000+
+  '09209_E_Multiple defined symbol "$1"'#000+
   '09210_E_COMDAT selection mode $1 not supported (section: "$1")'#000+
   '09211_E_Associative section expected for COMDAT section "$1"'#000+
-  '09212_E_COMDAT section selection mode doesn'#039't match for section "$'+
-  '1" and symbol "$2"'#000+
-  '09213_E_A','ssociative COMDAT section for section "$1" not found'#000+
+  '09212_E_COMDAT section selection mode does','n'#039't match for section '+
+  '"$1" and symbol "$2"'#000+
+  '09213_E_Associative COMDAT section for section "$1" not found'#000+
   '09214_D_Discarding duplicate symbol "$1" due to COMDAT selection mode'#000+
-  '09215_D_Discarding duplicate symbol "$1" with same size due to COMDAT '+
-  'selection mode'#000+
-  '09216_D_Discarding duplicate sym','bol "$1" with same content due to CO'+
-  'MDAT selection mode'#000+
+  '09215_D_Discarding duplicate symbol "$1" with same size due to CO','MDA'+
+  'T selection mode'#000+
+  '09216_D_Discarding duplicate symbol "$1" with same content due to COMD'+
+  'AT selection mode'#000+
   '09217_D_Replacing duplicate symbol "$1" with smaller size due to COMDA'+
   'T selection mode'#000+
-  '09218_E_Size of duplicate COMDAT symbol "$1" differs'#000+
-  '09219_E_Content of duplicate COMDAT symbol "','$1" differs'#000+
+  '09218_E_Size of duplicate COMDAT symbol "$1" ','differs'#000+
+  '09219_E_Content of duplicate COMDAT symbol "$1" differs'#000+
   '09220_E_COMDAT selection mode for symbol "$1" differs'#000+
   '10000_T_Unitsearch: $1'#000+
   '10001_T_PPU Loading $1'#000+
   '10002_U_PPU Name: $1'#000+
   '10003_U_PPU Flags: $1'#000+
   '10004_U_PPU Crc: $1'#000+
-  '10005_U_PPU Time: $1'#000+
+  '10005_U_PPU T','ime: $1'#000+
   '10006_U_PPU File too short'#000+
-  '10007_U_PPU Inval','id Header (no PPU at the begin)'#000+
+  '10007_U_PPU Invalid Header (no PPU at the begin)'#000+
   '10008_U_PPU Invalid Version $1'#000+
   '10009_U_PPU is compiled for another processor'#000+
   '10010_U_PPU is compiled for another target'#000+
   '10011_U_PPU Source: $1'#000+
-  '10012_U_Writing $1'#000+
+  '10012_U_Writi','ng $1'#000+
   '10013_F_Can'#039't Write PPU-File'#000+
-  '10014_F_Error rea','ding PPU-File'#000+
+  '10014_F_Error reading PPU-File'#000+
   '10015_F_unexpected end of PPU-File'#000+
   '10016_F_Invalid PPU-File entry: $1'#000+
   '10017_F_PPU Dbx count problem'#000+
   '10018_E_Illegal unit name: $1'#000+
   '10019_F_Too much units'#000+
-  '10020_F_Circular unit reference between $1 and $2'#000+
-  '10021_F_Can'#039't compile u','nit $1, no sources available'#000+
+  '10020_F_Circular unit',' reference between $1 and $2'#000+
+  '10021_F_Can'#039't compile unit $1, no sources available'#000+
   '10022_F_Can'#039't find unit $1 used by $2'#000+
   '10023_W_Unit $1 was not found but $2 exists'#000+
   '10024_F_Unit $1 searched but $2 found'#000+
-  '10025_W_Compiling the system unit requires the -Us switch'#000+
-  '10026_F_There were $1 errors comp','iling module, stopping'#000+
+  '10025_W_Compiling the system unit requi','res the -Us switch'#000+
+  '10026_F_There were $1 errors compiling module, stopping'#000+
   '10027_U_Load from $1 ($2) unit $3'#000+
   '10028_U_Recompiling $1, checksum changed for $2'#000+
   '10029_U_Recompiling $1, source found only'#000+
-  '10030_U_Recompiling unit, static lib is older than ppufile'#000+
-  '10031_U_Recompiling unit, shared l','ib is older than ppufile'#000+
+  '10030_U_Recompiling unit, static lib is o','lder than ppufile'#000+
+  '10031_U_Recompiling unit, shared lib is older than ppufile'#000+
   '10032_U_Recompiling unit, obj and asm are older than ppufile'#000+
   '10033_U_Recompiling unit, obj is older than asm'#000+
   '10034_U_Parsing interface of $1'#000+
-  '10035_U_Parsing implementation of $1'#000+
+  '10035_U_Parsing implem','entation of $1'#000+
   '10036_U_Second load for unit $1'#000+
-  '10037','_U_PPU Check file $1 time $2'#000+
+  '10037_U_PPU Check file $1 time $2'#000+
   '10040_W_Can'#039't recompile unit $1, but found modified include files'#000+
   '10041_U_File $1 is newer than the one used for creating PPU file $2'#000+
-  '10042_U_Trying to use a unit which was compiled with a different FPU m'+
-  'ode'#000+
-  '100','43_U_Loading interface units from $1'#000+
+  '10042_U_Trying to use a u','nit which was compiled with a different FPU'+
+  ' mode'#000+
+  '10043_U_Loading interface units from $1'#000+
   '10044_U_Loading implementation units from $1'#000+
   '10045_U_Interface CRC changed for unit $1'#000+
   '10046_U_Implementation CRC changed for unit $1'#000+
-  '10047_U_Finished compiling unit $1'#000+
-  '10048_U_Adding dependency: $1 depe','nds on $2'#000+
+  '10047_U_Finished ','compiling unit $1'#000+
+  '10048_U_Adding dependency: $1 depends on $2'#000+
   '10049_U_No reload, is caller: $1'#000+
   '10050_U_No reload, already in second compile: $1'#000+
   '10051_U_Flag for reload: $1'#000+
   '10052_U_Forced reloading'#000+
   '10053_U_Previous state of $1: $2'#000+
-  '10054_U_Already compiling $1, setting second compile'#000+
-  '10055_U_L','oading unit $1'#000+
+  '10054_U_Al','ready compiling $1, setting second compile'#000+
+  '10055_U_Loading unit $1'#000+
   '10056_U_Finished loading unit $1'#000+
   '10057_U_Registering new unit $1'#000+
   '10058_U_Re-resolving unit $1'#000+
   '10059_U_Skipping re-resolving unit $1, still loading used units'#000+
-  '10060_U_Unloading resource unit $1 (not needed)'#000+
-  '10061_E_Unit $1 was',' compiled using a different whole program optimiz'+
-  'ation feedback input ($2, $3); recompile it without wpo or use the sam'+
-  'e wpo feedback input file for this compilation invocation'#000+
-  '10062_U_Indirect interface (objects/classes) CRC changed for un','it $1'+
+  '10060_U_Unloadi','ng resource unit $1 (not needed)'#000+
+  '10061_E_Unit $1 was compiled using a different whole program optimizat'+
+  'ion feedback input ($2, $3); recompile it without wpo or use the same '+
+  'wpo feedback input file for this compilation invocation'#000+
+  '10062_U_Ind','irect interface (objects/classes) CRC changed for unit $1'+
   #000+
   '10063_U_PPU is compiled for another i8086 memory model'#000+
   '10064_U_Loading unit $1 from package $2'#000+
   '10065_F_Internal type "$1" was not found. Check if you use the correct'+
-  ' run time library.'#000+
-  '10066_F_Internal type "$1" does not look as expect','ed. Check if you u'+
-  'se the correct run time library.'#000+
+  ' run time library','.'#000+
+  '10066_F_Internal type "$1" does not look as expected. Check if you use'+
+  ' the correct run time library.'#000+
   '11000_O_$1 [options] <inputfile> [options]'#000+
   '11001_W_Only one source file supported, changing source file to compil'+
   'e from "$1" into "$2"'#000+
-  '11002_W_DEF file can be created only for OS/2'#000+
-  '11003_E_','nested response files are not supported'#000+
+  '11','002_W_DEF file can be created only for OS/2'#000+
+  '11003_E_nested response files are not supported'#000+
   '11004_F_No source file name in command line'#000+
   '11005_N_No option inside $1 config file'#000+
   '11006_E_Illegal parameter: $1'#000+
   '11007_H_-? writes help pages'#000+
-  '11008_F_Too many config files nested'#000+
-  '11009_F_Unable to op','en file $1'#000+
+  '11008','_F_Too many config files nested'#000+
+  '11009_F_Unable to open file $1'#000+
   '11010_D_Reading further options from $1'#000+
   '11011_W_Target is already set to: $1'#000+
   '11012_W_Shared libs not supported on DOS platform, reverting to static'+
   #000+
-  '11013_F_In options file $1 at line $2 too many #IF(N)DEFs encountered'#000+
-  '11014_F_In ','options file $1 at line $2 unexpected #ENDIFs encountered'+
-  #000+
+  '11013_F_In options file $1 at',' line $2 too many #IF(N)DEFs encountere'+
+  'd'#000+
+  '11014_F_In options file $1 at line $2 unexpected #ENDIFs encountered'#000+
   '11015_F_Open conditional at the end of the options file'#000+
   '11016_W_Debug information generation is not supported by this executab'+
   'le'#000+
-  '11017_H_Try recompiling with -dGDB'#000+
-  '11018_W_You are us','ing the obsolete switch $1'#000+
+  '1','1017_H_Try recompiling with -dGDB'#000+
+  '11018_W_You are using the obsolete switch $1'#000+
   '11019_W_You are using the obsolete switch $1, please use $2'#000+
   '11020_N_Switching assembler to default source writing assembler'#000+
-  '11021_W_Assembler output selected "$1" is not compatible with "$2"'#000+
-  '11022_W_"$1" assembler',' use forced'#000+
+  '11021_W_Assembler output selected "$1','" is not compatible with "$2"'#000+
+  '11022_W_"$1" assembler use forced'#000+
   '11026_T_Reading options from file $1'#000+
   '11027_T_Reading options from environment $1'#000+
   '11028_D_Handling option "$1"'#000+
   '11029_O_*** press enter ***'#000+
-  '11030_H_Start of reading config file $1'#000+
+  '11030_H_Start of reading config file $','1'#000+
   '11031_H_End of reading config file $1'#000+
-  '11032_D_inte','rpreting option "$1"'#000+
+  '11032_D_interpreting option "$1"'#000+
   '11036_D_interpreting firstpass option "$1"'#000+
   '11033_D_interpreting file option "$1"'#000+
   '11034_D_Reading config file "$1"'#000+
   '11035_D_found source file name "$1"'#000+
-  '11039_E_Unknown codepage "$1"'#000+
+  '11039_E_Unknown c','odepage "$1"'#000+
   '11040_F_Config file $1 is a directory'#000+
-  '1','1041_W_Assembler output selected "$1" cannot generate debug info, d'+
-  'ebugging disabled'#000+
+  '11041_W_Assembler output selected "$1" cannot generate debug info, deb'+
+  'ugging disabled'#000+
   '11042_W_Use of ppc386.cfg is deprecated, please use fpc.cfg instead'#000+
-  '11043_F_In options file $1 at line $2 #ELSE directive without #IF(N)DE'+
-  'F found'#000+
-  '11044_F_O','ption "$1" is not, or not yet, supported on the current tar'+
-  'get platform'#000+
+  '11043_F_In options file $1 at line ','$2 #ELSE directive without #IF(N)'+
+  'DEF found'#000+
+  '11044_F_Option "$1" is not, or not yet, supported on the current targe'+
+  't platform'#000+
   '11045_F_The feature "$1" is not, or not yet, supported on the selected'+
   ' target platform'#000+
-  '11046_N_DWARF debug information cannot be used with smart linking on t'+
-  'his target,',' switching to static linking'#000+
+  '11046_N_DWARF debug informati','on cannot be used with smart linking on'+
+  ' this target, switching to static linking'#000+
   '11047_W_Option "$1" is ignored for the current target platform.'#000+
   '11048_W_Disabling external debug information because it is unsupported'+
-  ' for the selected target/debug format combination.'#000+
-  '11049_N_DWARF debug inform','ation cannot be used with smart linking wi'+
-  'th external assembler, disabling static library creation.'#000+
+  ' for the selected target/','debug format combination.'#000+
+  '11049_N_DWARF debug information cannot be used with smart linking with'+
+  ' external assembler, disabling static library creation.'#000+
   '11050_E_Invalid value for MACOSX_DEPLOYMENT_TARGET environment variabl'+
   'e: $1'#000+
-  '11051_E_Invalid value for IPHONEOS_DEPLOYMENT_TARGET environment',' var'+
+  '11051_E_Inva','lid value for IPHONEOS_DEPLOYMENT_TARGET environment var'+
   'iable: $1'#000+
   '11052_E_You must use a FPU type of VFPV2, VFPV3 or VFPV3_D16 when usin'+
   'g the EABIHF ABI target'#000+
   '11053_W_The selected debug format is not supported on the current targ'+
-  'et, not changing the current setting'#000+
-  '11054_E_argument to "$1" ','is missing'#000+
+  'et, not ch','anging the current setting'#000+
+  '11054_E_argument to "$1" is missing'#000+
   '11055_E_malformed parameter: $1'#000+
   '11056_W_Smart linking requires external linker'#000+
   '11057_E_Creating .COM files is not supported in the current memory mod'+
-  'el. Only the tiny memory model supports making .COM files.'#000+
-  '11058_W_Experimental ','CheckPointer option not enabled because it is i'+
-  'ncomptatible with -Ur option.'#000+
+  'el. Only the tiny memory mod','el supports making .COM files.'#000+
+  '11058_W_Experimental CheckPointer option not enabled because it is inc'+
+  'omptatible with -Ur option.'#000+
   '11059_E_Unsupported target architecture -P$1, invoke the the "fpc" com'+
   'piler driver instead.'#000+
-  '12000_F_Cannot open whole program optimization feedback file "$1"'#000+
-  '12001','_D_Processing whole program optimization information in wpo fee'+
-  'dback file "$1"'#000+
+  '12000_F_Cannot open',' whole program optimization feedback file "$1"'#000+
+  '12001_D_Processing whole program optimization information in wpo feedb'+
+  'ack file "$1"'#000+
   '12002_D_Finished processing the whole program optimization information'+
   ' in wpo feedback file "$1"'#000+
-  '12003_E_Expected section header, but got "$2" at line $1 of wpo ','feed'+
+  '12003_E_Expe','cted section header, but got "$2" at line $1 of wpo feed'+
   'back file'#000+
   '12004_W_No handler registered for whole program optimization section "'+
   '$2" at line $1 of wpo feedback file, ignoring'#000+
-  '12005_D_Found whole program optimization section "$1" with information'+
-  ' about "$2"'#000+
-  '12006_F_The selected whole p','rogram optimizations require a previousl'+
-  'y generated feedback file (use -Fw to specify)'#000+
+  '12005_D_Found whole program optimization section "$1" with',' informati'+
+  'on about "$2"'#000+
+  '12006_F_The selected whole program optimizations require a previously '+
+  'generated feedback file (use -Fw to specify)'#000+
   '12007_E_No collected information necessary to perform "$1" whole progr'+
   'am optimization found'#000+
-  '12008_F_Specify a whole program optimization feedback file to',' store '+
+  '12008_F_S','pecify a whole program optimization feedback file to store '+
   'the generated info in (using -FW)'#000+
   '12009_E_Not generating any whole program optimization information, yet'+
   ' a feedback file was specified (using -FW)'#000+
-  '12010_E_Not performing any whole program optimizations, yet an input f'+
-  'eedback file was',' specified (using -Fw)'#000+
+  '12010_E_Not performing any whole p','rogram optimizations, yet an input'+
+  ' feedback file was specified (using -Fw)'#000+
   '12011_D_Skipping whole program optimization section "$1", because not '+
   'needed by the requested optimizations'#000+
-  '12012_W_Overriding previously read information for "$1" from feedback '+
-  'input file using information in section',' "$2"'#000+
+  '12012_W_Overriding previously read information for "$1" f','rom feedbac'+
+  'k input file using information in section "$2"'#000+
   '12013_E_Cannot extract symbol liveness information from program when s'+
   'tripping symbols, use -Xs-'#000+
   '12014_E_Cannot extract symbol liveness information from program when w'+
-  'hen not linking'#000+
-  '12015_F_Cannot find "$1" or "$2" to extract symbol ','liveness informat'+
-  'ion from linked program'#000+
+  'hen not linking',#000+
+  '12015_F_Cannot find "$1" or "$2" to extract symbol liveness informatio'+
+  'n from linked program'#000+
   '12016_E_Error during reading symbol liveness information produced by "'+
   '$1"'#000+
   '12017_F_Error executing "$1" (exitcode: $2) to extract symbol informat'+
-  'ion from linked program'#000+
-  '12018_E_Collection of symbol li','veness information can only help when'+
-  ' using smart linking, use -CX -XX'#000+
+  'ion',' from linked program'#000+
+  '12018_E_Collection of symbol liveness information can only help when u'+
+  'sing smart linking, use -CX -XX'#000+
   '12019_E_Cannot create specified whole program optimisation feedback fi'+
   'le "$1"'#000+
   '13001_F_Can'#039't find package $1'#000+
-  '13002_U_PCP file for package $1 found'#000+
-  '13003_E_Duplicate packa','ge $1'#000+
+  '13002_U_P','CP file for package $1 found'#000+
+  '13003_E_Duplicate package $1'#000+
   '13004_E_Unit $1 can not be part of a package'#000+
   '13005_N_Unit $1 is implicitely imported into package $2'#000+
   '13006_F_Failed to create PCP file $2 for package $1'#000+
-  '13007_F_Failed to read PCP file for package $1'#000+
+  '13007_F_Failed to read PCP fi','le for package $1'#000+
   '13008_T_PCP loading $1'#000+
-  '13009_U_PCP',' Name: $1'#000+
+  '13009_U_PCP Name: $1'#000+
   '13010_U_PCP Flags: $1'#000+
   '13011_U_PCP Crc: $1'#000+
   '13012_U_PCP Time: $1'#000+
   '13013_U_PCP File too short'#000+
   '13014_U_PCP Invalid Header (no PCP at the begin)'#000+
   '13015_U_PCP Invalid Version $1'#000+
-  '13016_U_PCP is compiled for another processor'#000+
-  '13017_U_PCP is',' compiled for another target'#000+
+  '13016_U_','PCP is compiled for another processor'#000+
+  '13017_U_PCP is compiled for another target'#000+
   '13018_U_Writing $1'#000+
   '13019_F_Can'#039't Write PCP-File'#000+
   '13020_F_Error reading PCP-File'#000+
   '13021_F_unexpected end of PCP-File'#000+
   '13022_F_Invalid PCP-File entry: $1'#000+
-  '13023_U_Trying to use a unit which was compiled with a differe','nt FPU'+
+  '13023_U_Tr','ying to use a unit which was compiled with a different FPU'+
   ' mode'#000+
   '13024_T_Packagesearch: $1'#000+
   '13025_U_Required package $1'#000+
   '13026_U_Contained unit $1'#000+
   '13027_E_Unit $1 is already contained in package $2'#000+
-  '13028_W_Unit $1 is imported from indirectly required package $2'#000+
+  '13028_W_Unit $1 is imported from indirectly r','equired package $2'#000+
   '13029_U_PPL filename $1'#000+
-  '11023_Fre','e Pascal Compiler version $FPCFULLVERSION [$FPCDATE] for $F'+
-  'PCCPU'#010+
+  '11023_Free Pascal Compiler version $FPCFULLVERSION [$FPCDATE] for $FPC'+
+  'CPU'#010+
   'Copyright (c) 1993-2017 by Florian Klaempfl and others'#000+
   '11024_Free Pascal Compiler version $FPCVERSION'#010+
   #010+
-  'Compiler date      : $FPCDATE'#010+
+  'Compiler date      :',' $FPCDATE'#010+
   'Compiler CPU target: $FPCCPU'#010+
   #010+
-  'Supported ta','rgets (targets marked with '#039'{*}'#039' are under devel'+
-  'opment):'#010+
+  'Supported targets (targets marked with '#039'{*}'#039' are under develop'+
+  'ment):'#010+
   '  $OSTARGETS'#010+
   #010+
   'Supported CPU instruction sets:'#010+
@@ -1338,10 +1339,10 @@ const msgtxt : array[0..000335,1..240] of char=(
   'Supported FPU instruction sets:'#010+
   '  $FPUINSTRUCTIONSETS'#010+
   #010+
-  'Supported inline assembler modes:'#010+
+  'Supported ','inline assembler modes:'#010+
   '  $ASMMODES'#010+
   #010+
-  'Recognized comp','iler and RTL features:'#010+
+  'Recognized compiler and RTL features:'#010+
   '  $FEATURELIST'#010+
   #010+
   'Supported ABI targets:'#010+
@@ -1354,325 +1355,325 @@ const msgtxt : array[0..000335,1..240] of char=(
   '  All'#010+
   '  $WPOPTIMIZATIONS'#010+
   #010+
-  'Supported Microcontroller types:$\n  $CONTROLLERTYPES$\','n'#010+
+  'Sup','ported Microcontroller types:$\n  $CONTROLLERTYPES$\n'#010+
   'This program comes under the GNU General Public Licence'#010+
   'For more information read COPYING.v2'#010+
   #010+
   'Please report bugs in our bug tracker on:'#010+
   '                 http://bugs.freepascal.org'#010+
   #010+
-  'More information may be found on our WWW pages (including',' directions'+
+  'More ','information may be found on our WWW pages (including directions'+
   #010+
   'for mailing lists useful for asking questions or discussing potential'#010+
   'new features, etc.):'#010+
   '                 http://www.freepascal.org'#000+
-  '11025_F*0*_Only options valid for the default or selected platform are'+
-  ' listed.'#010+
-  '**0*_Put + afte','r a boolean switch option to enable it, - to disable '+
-  'it.'#010+
+  '11025_F*0*_Only options valid for the defa','ult or selected platform a'+
+  're listed.'#010+
+  '**0*_Put + after a boolean switch option to enable it, - to disable it'+
+  '.'#010+
   '**1@<x>_Read compiler options from <x> in addition to the default fpc.'+
   'cfg'#010+
-  '**1a_The compiler does not delete the generated assembler file'#010+
-  '**2a5_Don'#039't generate Big Obj COFF files for GN','U Binutils older t'+
-  'han 2.25 (Windows, NativeNT)'#010+
+  '**1a_The compiler does not delete the generated assembler',' file'#010+
+  '**2a5_Don'#039't generate Big Obj COFF files for GNU Binutils older tha'+
+  'n 2.25 (Windows, NativeNT)'#010+
   '**2al_List sourcecode lines in assembler file'#010+
   '**2an_List node info in assembler file (-dEXTDEBUG compiler)'#010+
-  '**2ao_Add an extra option to external assembler call (ignored for inte'+
-  'rnal)'#010+
-  '*L2ap_Use ','pipes instead of creating temporary assembler files'#010+
+  '**2ao_Add an extra option to exter','nal assembler call (ignored for in'+
+  'ternal)'#010+
+  '*L2ap_Use pipes instead of creating temporary assembler files'#010+
   '**2ar_List register allocation/release info in assembler file'#010+
   '**2at_List temp allocation/release info in assembler file'#010+
-  '**1A<x>_Output format:'#010+
+  '**1A<x>_Output f','ormat:'#010+
   '**2Adefault_Use default assembler'#010+
-  '3*2Aas_Asse','mble using GNU AS'#010+
+  '3*2Aas_Assemble using GNU AS'#010+
   '3*2Amacho_Mach-O (Darwin, Intel 32 bit) using internal writer'#010+
   '8*2Anasm_Assemble using Nasm'#010+
   '8*2Anasmobj_Assemble using Nasm'#010+
   '3*2Anasm_Assemble using Nasm'#010+
-  '3*2Anasmcoff_COFF (Go32v2) file using Nasm'#010+
-  '3*2Anasmelf_ELF32 (Linux) f','ile using Nasm'#010+
+  '3*2Anasmcoff_COFF ','(Go32v2) file using Nasm'#010+
+  '3*2Anasmelf_ELF32 (Linux) file using Nasm'#010+
   '3*2Anasmwin32_Win32 object file using Nasm'#010+
   '3*2Anasmwdosx_Win32/WDOSX object file using Nasm'#010+
   '3*2Anasmdarwin_macho32 object file using Nasm (experimental)'#010+
-  '3*2Awasm_Obj file using Wasm (Watcom)'#010+
+  '3*2Awasm_Obj file us','ing Wasm (Watcom)'#010+
   '3*2Anasmobj_Obj file using Nasm'#010+
-  '3*','2Amasm_Obj file using Masm (Microsoft)'#010+
+  '3*2Amasm_Obj file using Masm (Microsoft)'#010+
   '3*2Atasm_Obj file using Tasm (Borland)'#010+
   '3*2Aelf_ELF (Linux) using internal writer'#010+
   '3*2Acoff_COFF (Go32v2) using internal writer'#010+
-  '3*2Apecoff_PE-COFF (Win32) using internal writer'#010+
-  '3*2Ayasm_Assemble using Ya','sm (experimental)'#010+
+  '3*2Apecoff_PE-COFF (Win','32) using internal writer'#010+
+  '3*2Ayasm_Assemble using Yasm (experimental)'#010+
   '4*2Aas_Assemble using GNU AS'#010+
   '4*2Agas_Assemble using GNU GAS'#010+
   '4*2Agas-darwin_Assemble darwin Mach-O64 using GNU GAS'#010+
   '4*2Amasm_Win64 object file using ml64 (Microsoft)'#010+
-  '4*2Apecoff_PE-COFF (Win64) using internal writer'#010+
-  '4*2Aelf_E','LF (Linux-64bit) using internal writer'#010+
+  '4*2Ape','coff_PE-COFF (Win64) using internal writer'#010+
+  '4*2Aelf_ELF (Linux-64bit) using internal writer'#010+
   '4*2Ayasm_Assemble using Yasm (experimental)'#010+
   '4*2Anasm_Assemble  using Nasm (experimental)'#010+
-  '4*2Anasmwin64_Assemble Win64 object file using Nasm (experimental)'#010+
-  '4*2Anasmelf_Assemble Linux-64bit object file ','using Nasm (experimenta'+
-  'l)'#010+
+  '4*2Anasmwin64_Assemble Win64 object file using Nasm (experim','ental)'#010+
+  '4*2Anasmelf_Assemble Linux-64bit object file using Nasm (experimental)'+
+  #010+
   '4*2Anasmdarwin_Assemble darwin macho64 object file using Nasm (experim'+
   'ental)'#010+
   '6*2Aas_Unix o-file using GNU AS'#010+
   '6*2Agas_GNU Motorola assembler'#010+
-  '6*2Amit_MIT Syntax (old GAS)'#010+
+  '6*2Amit_MIT Syntax (ol','d GAS)'#010+
   '6*2Amot_Standard Motorola assembler'#010+
-  'A*2Aas_As','semble using GNU AS'#010+
+  'A*2Aas_Assemble using GNU AS'#010+
   'P*2Aas_Assemble using GNU AS'#010+
   'S*2Aas_Assemble using GNU AS'#010+
   '**1b_Generate browser info'#010+
   '**2bl_Generate local symbol info'#010+
   '**1B_Build all modules'#010+
-  '**1C<x>_Code generation options:'#010+
-  '**2C3_Turn on ieee error checking for constant','s'#010+
+  '**1C<x>_Code generation opt','ions:'#010+
+  '**2C3_Turn on ieee error checking for constants'#010+
   '**2Ca<x>_Select ABI; see fpc -i or fpc -ia for possible values'#010+
   '**2Cb_Generate code for a big-endian variant of the target architectur'+
   'e'#010+
   '**2Cc<x>_Set default calling convention to <x>'#010+
-  '**2CD_Create also dynamic library (not supported)'#010+
-  '**2Ce_','Compilation with emulated floating point opcodes'#010+
+  '**2C','D_Create also dynamic library (not supported)'#010+
+  '**2Ce_Compilation with emulated floating point opcodes'#010+
   '**2Cf<x>_Select fpu instruction set to use; see fpc -i or fpc -if for '+
   'possible values'#010+
-  '**2CF<x>_Minimal floating point constant precision (default, 32, 64)'#010+
+  '**2CF<x>_Minimal floating point constant precision (d','efault, 32, 64)'+
+  #010+
   '**2Cg_Generate PIC code'#010+
-  '**2Ch<n>[,m]','_<n> bytes min heap size (between 1023 and 67107840) and'+
-  ' optionally [m] max heap size'#010+
+  '**2Ch<n>[,m]_<n> bytes min heap size (between 1023 and 67107840) and o'+
+  'ptionally [m] max heap size'#010+
   '**2Ci_IO-checking'#010+
   'A*2CI<x>_Select instruction set on ARM: ARM or THUMB'#010+
   '**2Cn_Omit linking stage'#010+
-  'P*2CN_Generate nil-pointer checks (AIX-only)'#010+
-  '**2Co_Check o','verflow of integer operations'#010+
+  'P*2CN_','Generate nil-pointer checks (AIX-only)'#010+
+  '**2Co_Check overflow of integer operations'#010+
   '**2CO_Check for possible overflow of integer operations'#010+
   '**2Cp<x>_Select instruction set; see fpc -i or fpc -ic for possible va'+
   'lues'#010+
-  '**2CP<x>=<y>_ packing settings'#010+
-  '**3CPPACKSET=<y>_ <y> set allocation: 0, 1 or DE','FAULT or NORMAL, 2, '+
-  '4 and 8'#010+
+  '**2CP<x>=<y>_ packing setti','ngs'#010+
+  '**3CPPACKSET=<y>_ <y> set allocation: 0, 1 or DEFAULT or NORMAL, 2, 4 '+
+  'and 8'#010+
   '**3CPPACKENUM=<y>_ <y> enum packing: 0, 1, 2 and 4 or DEFAULT or NORMA'+
   'L'#010+
   '**3CPPACKRECORD=<y>_ <y> record packing: 0 or DEFAULT or NORMAL, 1, 2,'+
   ' 4, 8, 16 and 32'#010+
-  '**2Cr_Range checking'#010+
-  '**2CR_Verify object method call ','validity'#010+
+  '*','*2Cr_Range checking'#010+
+  '**2CR_Verify object method call validity'#010+
   '**2Cs<n>_Set stack checking size to <n>'#010+
   '**2Ct_Stack checking (for testing only, see manual)'#010+
   '8*2CT<x>_Target-specific code generation options'#010+
-  '3*2CT<x>_Target-specific code generation options'#010+
-  '4*2CT<x>_Target-specific code generation ','options'#010+
+  '3*2CT<x>_Target-specific code generati','on options'#010+
+  '4*2CT<x>_Target-specific code generation options'#010+
   'p*2CT<x>_Target-specific code generation options'#010+
   'P*2CT<x>_Target-specific code generation options'#010+
   'J*2CT<x>_Target-specific code generation options'#010+
-  'A*2CT<x>_Target-specific code generation options'#010+
-  'p*3CTsmalltoc_ Generate smaller TOCs',' at the expense of execution spe'+
-  'ed (AIX)'#010+
+  'A*2CT<x>_Target-specific code gen','eration options'#010+
+  'p*3CTsmalltoc_ Generate smaller TOCs at the expense of execution speed'+
+  ' (AIX)'#010+
   'P*3CTsmalltoc_ Generate smaller TOCs at the expense of execution speed'+
   ' (AIX)'#010+
-  'J*3CTautogetterprefix=X_  Automatically create getters for properties '+
+  'J*3CTautogetterprefix=X_  Automatically create getters for properties ',
+  'with prefix X (empty string disables)'#010+
+  'J*3CTautosetterprefix=X_  Automatically create setters for properties '+
   'with prefix X (empty string disables)'#010+
-  'J*3CTautosette','rprefix=X_  Automatically create setters for propertie'+
-  's with prefix X (empty string disables)'#010+
   '8*3CTcld_                 Emit a CLD instruction before using the x86 '+
   'string instructions'#010+
-  '3*3CTcld_                 Emit a CLD instruction before ','using the x8'+
+  '3*3C','Tcld_                 Emit a CLD instruction before using the x8'+
   '6 string instructions'#010+
   '4*3CTcld_                 Emit a CLD instruction before using the x86 '+
   'string instructions'#010+
-  '8*3CTfarprocspushoddbp_       Increment BP before pushing it in the pr'+
-  'ologue of far functions'#010+
-  'J*3CTcompactintarrayin','it_ Generate smaller (but potentially slower) '+
-  'code for initializing integer array constants'#010+
+  '8*3CTfarprocspushoddbp_       Increment BP before pushing it in ','the '+
+  'prologue of far functions'#010+
+  'J*3CTcompactintarrayinit_ Generate smaller (but potentially slower) co'+
+  'de for initializing integer array constants'#010+
   'J*3CTenumfieldinit_       Initialize enumeration fields in constructor'+
-  's to enumtype(0), after calling inherited constructors'#010+
-  'J*3CTinitlocals_       ','   Initialize local variables that trigger a '+
-  'JVM bytecode verification error if used uninitialized (slows down code'+
-  ')'#010+
+  's to enumtype(0), after ca','lling inherited constructors'#010+
+  'J*3CTinitlocals_          Initialize local variables that trigger a JV'+
+  'M bytecode verification error if used uninitialized (slows down code)'#010+
   'J*3CTlowercaseprocstart_  Lowercase the first character of procedure/f'+
-  'unction/method names'#010+
-  'A*3CTthumbinterworking_ Generate',' Thumb interworking-safe code if pos'+
-  'sible'#010+
+  'u','nction/method names'#010+
+  'A*3CTthumbinterworking_ Generate Thumb interworking-safe code if possi'+
+  'ble'#010+
   'J*2Cv_Var/out parameter copy-out checking'#010+
   '**2CX_Create also smartlinked library'#010+
   '**1d<x>_Defines the symbol <x>'#010+
   '**1D_Generate a DEF file'#010+
-  '**2Dd<x>_Set description to <x>'#010+
-  '**2Dv<x>_Set DLL version to <x','>'#010+
+  '**2Dd<x>_S','et description to <x>'#010+
+  '**2Dv<x>_Set DLL version to <x>'#010+
   '*O2Dw_PM application'#010+
   '**1e<x>_Set path to executable'#010+
   '**1E_Same as -Cn'#010+
   '**1fPIC_Same as -Cg'#010+
   '**1F<x>_Set file names and paths:'#010+
-  '**2Fa<x>[,y]_(for a program) load units <x> and [y] before uses is par'+
-  'sed'#010+
+  '**2Fa<x>[,y]_(for a program) load units <x> and [y] before uses',' is p'+
+  'arsed'#010+
   '**2Fc<x>_Set input codepage to <x>'#010+
-  '**2FC<','x>_Set RC compiler binary name to <x>'#010+
+  '**2FC<x>_Set RC compiler binary name to <x>'#010+
   '**2Fd_Disable the compiler'#039's internal directory cache'#010+
   '**2FD<x>_Set the directory where to search for compiler utilities'#010+
-  '**2Fe<x>_Redirect error output to <x>'#010+
-  '**2Ff<x>_Add <x> to framework path (Darwin o','nly)'#010+
+  '**2Fe<x>_Redirect error output',' to <x>'#010+
+  '**2Ff<x>_Add <x> to framework path (Darwin only)'#010+
   '**2FE<x>_Set exe/unit output path to <x>'#010+
   '**2Fi<x>_Add <x> to include path'#010+
   '**2Fl<x>_Add <x> to library path'#010+
   '**2FL<x>_Use <x> as dynamic linker'#010+
-  '**2Fm<x>_Load unicode conversion table from <x>.txt in the compiler di'+
-  'r'#010+
-  '**2FM<x>_Set the dire','ctory where to search for unicode binary files'#010+
+  '**2Fm<x>_Load unicode conversion table fr','om <x>.txt in the compiler '+
+  'dir'#010+
+  '**2FM<x>_Set the directory where to search for unicode binary files'#010+
   '**2Fo<x>_Add <x> to object path'#010+
   '**2Fr<x>_Load error message file <x>'#010+
   '**2FR<x>_Set resource (.res) linker to <x>'#010+
-  '**2Fu<x>_Add <x> to unit path'#010+
-  '**2FU<x>_Set unit output path to <x>, overrides -FE',#010+
+  '**2Fu<x>_Add <x> to unit path',#010+
+  '**2FU<x>_Set unit output path to <x>, overrides -FE'#010+
   '**2FW<x>_Store generated whole-program optimization feedback in <x>'#010+
   '**2Fw<x>_Load previously stored whole-program optimization feedback fr'+
   'om <x>'#010+
-  '*g1g_Generate debug information (default format for target)'#010+
-  '*g2gc_Generate checks for pointers',' (experimental, only available on '+
-  'some targets, might generate false positive)'#010+
+  '*g1g_Generate debug information (default f','ormat for target)'#010+
+  '*g2gc_Generate checks for pointers (experimental, only available on so'+
+  'me targets, might generate false positive)'#010+
   '*g2gh_Use heaptrace unit (for memory leak/corruption debugging)'#010+
-  '*g2gl_Use line info unit (show more info with backtraces)'#010+
-  '*g2go<x>_Set debug information options'#010,
+  '*g2gl_Use line info unit (show more info with',' backtraces)'#010+
+  '*g2go<x>_Set debug information options'#010+
   '*g3godwarfsets_ Enable DWARF '#039'set'#039' type debug information (bre'+
   'aks gdb < 6.5)'#010+
   '*g3gostabsabsincludes_ Store absolute/full include file paths in Stabs'+
   #010+
-  '*g3godwarfmethodclassprefix_ Prefix method names in DWARF with class n'+
-  'ame'#010+
-  '*g3godwarfcpp_ Sim','ulate C++ debug information in DWARF'#010+
+  '*g3godwarfmethodclassprefix_ Prefix meth','od names in DWARF with class'+
+  ' name'#010+
+  '*g3godwarfcpp_ Simulate C++ debug information in DWARF'#010+
   '*g2gp_Preserve case in stabs symbol names'#010+
   '*g2gs_Generate Stabs debug information'#010+
   '*g2gt_Trash local variables (to detect uninitialized uses; multiple '#039+
-  't'#039' changes the trashing value)'#010+
-  '*g2gv_Generates progra','ms traceable with Valgrind'#010+
+  't',#039' changes the trashing value)'#010+
+  '*g2gv_Generates programs traceable with Valgrind'#010+
   '*g2gw_Generate DWARFv2 debug information (same as -gw2)'#010+
   '*g2gw2_Generate DWARFv2 debug information'#010+
   '*g2gw3_Generate DWARFv3 debug information'#010+
-  '*g2gw4_Generate DWARFv4 debug information (experimental)'#010+
-  '**1i_Information',#010+
+  '*g2gw4_Generate DWARF','v4 debug information (experimental)'#010+
+  '**1i_Information'#010+
   '**2iD_Return compiler date'#010+
   '**2iSO_Return compiler OS'#010+
   '**2iSP_Return compiler host processor'#010+
   '**2iTO_Return target OS'#010+
   '**2iTP_Return target processor'#010+
   '**2iV_Return short compiler version'#010+
-  '**2iW_Return full compiler version'#010+
-  '**2ia_Return list of s','upported ABI targets'#010+
+  '**2iW','_Return full compiler version'#010+
+  '**2ia_Return list of supported ABI targets'#010+
   '**2ic_Return list of supported CPU instruction sets'#010+
   '**2if_Return list of supported FPU instruction sets'#010+
   '**2ii_Return list of supported inline assembler modes'#010+
-  '**2io_Return list of supported optimizations'#010+
-  '**2ir_Return lis','t of recognized compiler and RTL features'#010+
+  '**2io_Ret','urn list of supported optimizations'#010+
+  '**2ir_Return list of recognized compiler and RTL features'#010+
   '**2it_Return list of supported targets'#010+
   '**2iu_Return list of supported microcontroller types'#010+
-  '**2iw_Return list of supported whole program optimizations'#010+
+  '**2iw_Return list of supported whole program optimizat','ions'#010+
   '**1I<x>_Add <x> to include path'#010+
-  '**1k<x>_Pass <x','> to the linker'#010+
+  '**1k<x>_Pass <x> to the linker'#010+
   '**1l_Write logo'#010+
   '**1M<x>_Set language mode to <x>'#010+
   '**2Mfpc_Free Pascal dialect (default)'#010+
   '**2Mobjfpc_FPC mode with Object Pascal support'#010+
-  '**2Mdelphi_Delphi 7 compatibility mode'#010+
+  '**2Mdelphi_Delphi 7 compatibility mode',#010+
   '**2Mtp_TP/BP 7.0 compatibility mode'#010+
-  '**2Mmacpas_Maci','ntosh Pascal dialects compatibility mode'#010+
+  '**2Mmacpas_Macintosh Pascal dialects compatibility mode'#010+
   '**2Miso_ISO 7185 mode'#010+
   '**2Mextendedpascal_ISO 10206 mode'#010+
   '**2Mdelphiunicode_Delphi 2009 and later compatibility mode'#010+
-  '**1n_Do not read the default config files'#010+
-  '**1o<x>_Change the name of the executable ','produced to <x>'#010+
+  '**1n_Do not read the default con','fig files'#010+
+  '**1o<x>_Change the name of the executable produced to <x>'#010+
   '**1O<x>_Optimizations:'#010+
   '**2O-_Disable optimizations'#010+
   '**2O1_Level 1 optimizations (quick and debugger friendly)'#010+
   '**2O2_Level 2 optimizations (-O1 + quick optimizations)'#010+
-  '**2O3_Level 3 optimizations (-O2 + slow optimizations)'#010+
-  '**2O','4_Level 4 optimizations (-O3 + optimizations which might have un'+
-  'expected side effects)'#010+
+  '**2O3_L','evel 3 optimizations (-O2 + slow optimizations)'#010+
+  '**2O4_Level 4 optimizations (-O3 + optimizations which might have unex'+
+  'pected side effects)'#010+
   '**2Oa<x>=<y>_Set alignment'#010+
   '**2Oo[NO]<x>_Enable or disable optimizations; see fpc -i or fpc -io fo'+
-  'r possible values'#010+
-  '**2Op<x>_Set target cpu for optimizing','; see fpc -i or fpc -ic for po'+
-  'ssible values'#010+
+  'r po','ssible values'#010+
+  '**2Op<x>_Set target cpu for optimizing; see fpc -i or fpc -ic for poss'+
+  'ible values'#010+
   '**2OW<x>_Generate whole-program optimization feedback for optimization'+
   ' <x>; see fpc -i or fpc -iw for possible values'#010+
-  '**2Ow<x>_Perform whole-program optimization <x>; see fpc -i or fpc -iw'+
-  ' for pos','sible values'#010+
+  '**2Ow<x>_Perform whole-pro','gram optimization <x>; see fpc -i or fpc -'+
+  'iw for possible values'#010+
   '**2Os_Optimize for size rather than speed'#010+
   '**1pg_Generate profile code for gprof (defines FPC_PROFILE)'#010+
   'F*1P<x>_Target CPU / compiler related options:'#010+
-  'F*2PB_Show default compiler binary'#010+
+  'F*2PB_Show default compile','r binary'#010+
   'F*2PP_Show default target cpu'#010+
-  'F*2P<x>_Set t','arget CPU (aarch64,arm,avr,i386,i8086,jvm,m68k,mips,mip'+
-  'sel,powerpc,powerpc64,sparc,x86_64)'#010+
+  'F*2P<x>_Set target CPU (aarch64,arm,avr,i386,i8086,jvm,m68k,mips,mipse'+
+  'l,powerpc,powerpc64,sparc,x86_64)'#010+
   '**1R<x>_Assembler reading style:'#010+
   '**2Rdefault_Use default assembler for target'#010+
-  '3*2Ratt_Read AT&T style assembler'#010+
-  '3*2Rintel_Read Intel style assembler'#010,
+  '3*2Ratt_Read AT&T s','tyle assembler'#010+
+  '3*2Rintel_Read Intel style assembler'#010+
   '4*2Ratt_Read AT&T style assembler'#010+
   '4*2Rintel_Read Intel style assembler'#010+
   '8*2Ratt_Read AT&T style assembler'#010+
   '8*2Rintel_Read Intel style assembler'#010+
   '6*2RMOT_Read Motorola style assembler'#010+
-  '**1S<x>_Syntax options:'#010+
+  '**1S<x>_','Syntax options:'#010+
   '**2S2_Same as -Mobjfpc'#010+
-  '**2Sc_Support',' operators like C (*=,+=,/= and -=)'#010+
+  '**2Sc_Support operators like C (*=,+=,/= and -=)'#010+
   '**2Sa_Turn on assertions'#010+
   '**2Sd_Same as -Mdelphi'#010+
   '**2Se<x>_Error options. <x> is a combination of the following:'#010+
-  '**3*_<n> : Compiler halts after the <n> errors (default is 1)'#010+
-  '**3*_w : Compiler also halts af','ter warnings'#010+
+  '**3*_<n> : Compiler halts after the <n> e','rrors (default is 1)'#010+
+  '**3*_w : Compiler also halts after warnings'#010+
   '**3*_n : Compiler also halts after notes'#010+
   '**3*_h : Compiler also halts after hints'#010+
   '**2Sf_Enable certain features in compiler and RTL; see fpc -i or fpc -'+
-  'ir for possible values)'#010+
-  '**2Sg_Enable LABEL and GOTO (default in -Mtp and -M','delphi)'#010+
+  'ir for possible values)',#010+
+  '**2Sg_Enable LABEL and GOTO (default in -Mtp and -Mdelphi)'#010+
   '**2Sh_Use reference counted strings (ansistring by default) instead of'+
   ' shortstrings'#010+
   '**2Si_Turn on inlining of procedures/functions declared as "inline"'#010+
-  '**2Sj_Allows typed constants to be writeable (default in all modes)'#010+
-  '**2Sk_Load f','pcylix unit'#010+
+  '**2Sj_Allows typed constants',' to be writeable (default in all modes)'#010+
+  '**2Sk_Load fpcylix unit'#010+
   '**2SI<x>_Set interface style to <x>'#010+
   '**3SIcom_COM compatible interface (default)'#010+
   '**3SIcorba_CORBA compatible interface'#010+
   '**2Sm_Support macros like C (global)'#010+
   '**2So_Same as -Mtp'#010+
-  '**2Sr_Transparent file names in ISO mode'#010+
-  '**2Ss_Constru','ctor name must be init (destructor must be done)'#010+
+  '**','2Sr_Transparent file names in ISO mode'#010+
+  '**2Ss_Constructor name must be init (destructor must be done)'#010+
   '**2Sv_Support vector processing (use CPU vector extensions if availabl'+
   'e)'#010+
   '**2Sx_Enable exception keywords (default in Delphi/ObjFPC modes)'#010+
-  '**2Sy_@<pointer> returns a typed pointer, same as $T+',#010+
+  '*','*2Sy_@<pointer> returns a typed pointer, same as $T+'#010+
   '**1s_Do not call assembler and linker'#010+
   '**2sh_Generate script to link on host'#010+
   '**2st_Generate script to link on target'#010+
   '**2sr_Skip register allocation phase (use with -alr)'#010+
-  '**1T<x>_Target operating system:'#010+
+  '**1T<x>_Target ope','rating system:'#010+
   '3*2Tandroid_Android'#010+
   '3*2Taros_AROS'#010+
-  '3*2','Tbeos_BeOS'#010+
+  '3*2Tbeos_BeOS'#010+
   '3*2Tdarwin_Darwin/Mac OS X'#010+
   '3*2Tembedded_Embedded'#010+
   '3*2Temx_OS/2 via EMX (including EMX/RSX extender)'#010+
   '3*2Tfreebsd_FreeBSD'#010+
   '3*2Tgo32v2_Version 2 of DJ Delorie DOS extender'#010+
-  '3*2Thaiku_Haiku'#010+
-  '3*2Tiphonesim_ iPhoneSimulator from iOS SDK 3.','2+ (older versions: -T'+
-  'darwin)'#010+
+  '3*2Thaiku_','Haiku'#010+
+  '3*2Tiphonesim_ iPhoneSimulator from iOS SDK 3.2+ (older versions: -Tda'+
+  'rwin)'#010+
   '3*2Tlinux_Linux'#010+
   '3*2Tnativent_Native NT API (experimental)'#010+
   '3*2Tnetbsd_NetBSD'#010+
   '3*2Tnetware_Novell Netware Module (clib)'#010+
-  '3*2Tnetwlibc_Novell Netware Module (libc)'#010+
+  '3*2Tnetwlibc_Novell Netware Module (libc)',#010+
   '3*2Topenbsd_OpenBSD'#010+
   '3*2Tos2_OS/2 / eComStation'#010+
-  '3*2T','symbian_Symbian OS'#010+
+  '3*2Tsymbian_Symbian OS'#010+
   '3*2Tsolaris_Solaris'#010+
   '3*2Twatcom_Watcom compatible DOS extender'#010+
   '3*2Twdosx_WDOSX DOS extender'#010+
   '3*2Twin32_Windows 32 Bit'#010+
   '3*2Twince_Windows CE'#010+
   '4*2Tdarwin_Darwin/Mac OS X'#010+
-  '4*2Tfreebsd_FreeBSD'#010+
+  '4*2Tf','reebsd_FreeBSD'#010+
   '4*2Tiphonesim_ iPhoneSimulator'#010+
-  '4*2Tli','nux_Linux'#010+
+  '4*2Tlinux_Linux'#010+
   '4*2Tnetbsd_NetBSD'#010+
   '4*2Topenbsd_OpenBSD'#010+
   '4*2Tsolaris_Solaris'#010+
@@ -1680,10 +1681,10 @@ const msgtxt : array[0..000335,1..240] of char=(
   '6*2Tamiga_Commodore Amiga'#010+
   '6*2Tatari_Atari ST/STe/TT'#010+
   '6*2Tlinux_Linux'#010+
-  '6*2Tnetbsd_NetBSD'#010+
+  '6*2Tnetbsd_','NetBSD'#010+
   '6*2Tmacos_Mac OS'#010+
   '6*2Tpalmos_PalmOS'#010+
-  '8*2Tmsdos_','MS-DOS (and compatible)'#010+
+  '8*2Tmsdos_MS-DOS (and compatible)'#010+
   'A*2Tandroid_Android'#010+
   'A*2Tdarwin_Darwin/iPhoneOS/iOS'#010+
   'A*2Tembedded_Embedded'#010+
@@ -1691,10 +1692,10 @@ const msgtxt : array[0..000335,1..240] of char=(
   'A*2Tlinux_Linux'#010+
   'A*2Tnds_Nintendo DS'#010+
   'A*2Tsymbian_Symbian'#010+
-  'A*2Twince_Windows CE'#010+
+  'A*2Twince_','Windows CE'#010+
   'a*2Tdarwin_Darwin/iOS'#010+
   'a*2Tlinux_Linux'#010+
-  'J*2','Tandroid_Android'#010+
+  'J*2Tandroid_Android'#010+
   'J*2Tjava_Java'#010+
   'm*2Tandroid_Android'#010+
   'm*2Tembedded_Embedded'#010+
@@ -1704,9 +1705,9 @@ const msgtxt : array[0..000335,1..240] of char=(
   'P*2Taix_AIX'#010+
   'P*2Tamiga_AmigaOS'#010+
   'P*2Tdarwin_Darwin/Mac OS X'#010+
-  'P*2Tlinux_Linux'#010+
+  'P*2T','linux_Linux'#010+
   'P*2Tmacos_Mac OS (classic)'#010+
-  'P*2Tmorphos_M','orphOS'#010+
+  'P*2Tmorphos_MorphOS'#010+
   'P*2Tnetbsd_NetBSD'#010+
   'P*2Twii_Wii'#010+
   'p*2Taix_AIX'#010+
@@ -1716,144 +1717,143 @@ const msgtxt : array[0..000335,1..240] of char=(
   'S*2Tlinux_Linux'#010+
   's*2Tlinux_Linux'#010+
   'V*2Tembedded_Embedded'#010+
-  '**1u<x>_Undefines the symbol <x>'#010+
+  '**1u<x>_Undefines the ','symbol <x>'#010+
   '**1U_Unit options:'#010+
-  '**2Un_Do not check whe','re the unit name matches the file name'#010+
+  '**2Un_Do not check where the unit name matches the file name'#010+
   '**2Ur_Generate release unit files (never automatically recompiled)'#010+
   '**2Us_Compile a system unit'#010+
-  '**1v<x>_Be verbose. <x> is a combination of the following letters:'#010+
-  '**2*_e : Show errors (default)       0 ',': Show nothing (except errors'+
-  ')'#010+
+  '**1v<x>_Be verbose. <x> is a combination of the follow','ing letters:'#010+
+  '**2*_e : Show errors (default)       0 : Show nothing (except errors)'#010+
   '**2*_w : Show warnings               u : Show unit info'#010+
   '**2*_n : Show notes                  t : Show tried/used files'#010+
-  '**2*_h : Show hints                  c : Show conditionals'#010+
-  '**2*_i : Show general info     ','      d : Show debug info'#010+
+  '**2*_h : Show hints                  c',' : Show conditionals'#010+
+  '**2*_i : Show general info           d : Show debug info'#010+
   '**2*_l : Show linenumbers            r : Rhide/GCC compatibility mode'#010+
   '**2*_s : Show time stamps            q : Show message numbers'#010+
-  '**2*_a : Show everything             x : Show info about invoked tools'+
-  #010+
-  '**2*_b : Wr','ite file names messages   p : Write tree.log with parse t'+
-  'ree'#010+
+  '**2*_a : Show everything      ','       x : Show info about invoked too'+
+  'ls'#010+
+  '**2*_b : Write file names messages   p : Write tree.log with parse tre'+
+  'e'#010+
   '**2*_    with full path              v : Write fpcdebug.txt with'#010+
-  '**2*_z : Write output to stderr          lots of debugging info'#010+
-  '**2*_m<x>,<y> : Do not show messages numbered <x> ','and <y>'#010+
+  '**2*_z : Write output to stderr          lots of debugging inf','o'#010+
+  '**2*_m<x>,<y> : Do not show messages numbered <x> and <y>'#010+
   'F*1V<x>_Append '#039'-<x>'#039' to the used compiler binary name (e.g. f'+
   'or version)'#010+
   '**1W<x>_Target-specific options (targets)'#010+
   '3*2WA_Specify native type application (Windows)'#010+
-  '4*2WA_Specify native type application (Windows)'#010+
-  'A*2WA_Specify native',' type application (Windows)'#010+
+  '4*2WA_Specify na','tive type application (Windows)'#010+
+  'A*2WA_Specify native type application (Windows)'#010+
   '3*2Wb_Create a bundle instead of a library (Darwin)'#010+
   'P*2Wb_Create a bundle instead of a library (Darwin)'#010+
   'p*2Wb_Create a bundle instead of a library (Darwin)'#010+
-  'a*2Wb_Create a bundle instead of a library (Darwin)'#010+
-  'A*2W','b_Create a bundle instead of a library (Darwin)'#010+
+  'a*2W','b_Create a bundle instead of a library (Darwin)'#010+
+  'A*2Wb_Create a bundle instead of a library (Darwin)'#010+
   '4*2Wb_Create a bundle instead of a library (Darwin)'#010+
   '3*2WB_Create a relocatable image (Windows, Symbian)'#010+
-  '3*2WB<x>_Set image base to <x> (Windows, Symbian)'#010+
-  '4*2WB_Create a relocatable image (Wind','ows)'#010+
+  '3*2WB<x>_Set image base to <x> (Wind','ows, Symbian)'#010+
+  '4*2WB_Create a relocatable image (Windows)'#010+
   '4*2WB<x>_Set image base to <x> (Windows)'#010+
   'A*2WB_Create a relocatable image (Windows, Symbian)'#010+
   'A*2WB<x>_Set image base to <x> (Windows, Symbian)'#010+
-  '3*2WC_Specify console type application (EMX, OS/2, Windows)'#010+
-  '4*2WC_Specify console type appli','cation (Windows)'#010+
+  '3*2WC_Specify console type application (','EMX, OS/2, Windows)'#010+
+  '4*2WC_Specify console type application (Windows)'#010+
   'A*2WC_Specify console type application (Windows)'#010+
   'P*2WC_Specify console type application (Classic Mac OS)'#010+
   '3*2WD_Use DEFFILE to export functions of DLL or EXE (Windows)'#010+
-  '4*2WD_Use DEFFILE to export functions of DLL or EXE (Win','dows)'#010+
+  '4*2W','D_Use DEFFILE to export functions of DLL or EXE (Windows)'#010+
   'A*2WD_Use DEFFILE to export functions of DLL or EXE (Windows)'#010+
   '3*2We_Use external resources (Darwin)'#010+
   '4*2We_Use external resources (Darwin)'#010+
   'a*2We_Use external resources (Darwin)'#010+
-  'A*2We_Use external resources (Darwin)'#010+
-  'P*2We_Use external r','esources (Darwin)'#010+
+  'A*2We_','Use external resources (Darwin)'#010+
+  'P*2We_Use external resources (Darwin)'#010+
   'p*2We_Use external resources (Darwin)'#010+
   '3*2WF_Specify full-screen type application (EMX, OS/2)'#010+
   '3*2WG_Specify graphic type application (EMX, OS/2, Windows)'#010+
-  '4*2WG_Specify graphic type application (Windows)'#010+
-  'A*2WG_Specify graphi','c type application (Windows)'#010+
+  '4*2WG_Specify gra','phic type application (Windows)'#010+
+  'A*2WG_Specify graphic type application (Windows)'#010+
   'P*2WG_Specify graphic type application (Classic Mac OS)'#010+
   '3*2Wi_Use internal resources (Darwin)'#010+
   '4*2Wi_Use internal resources (Darwin)'#010+
-  'a*2Wi_Use internal resources (Darwin)'#010+
+  'a*2Wi_Use internal resource','s (Darwin)'#010+
   'A*2Wi_Use internal resources (Darwin)'#010+
-  'P*2','Wi_Use internal resources (Darwin)'#010+
+  'P*2Wi_Use internal resources (Darwin)'#010+
   'p*2Wi_Use internal resources (Darwin)'#010+
   '3*2WI_Turn on/off the usage of import sections (Windows)'#010+
   '4*2WI_Turn on/off the usage of import sections (Windows)'#010+
-  'A*2WI_Turn on/off the usage of import sections (Windo','ws)'#010+
+  'A','*2WI_Turn on/off the usage of import sections (Windows)'#010+
   '8*2Wh_Use huge code for units (ignored for models with CODE in a uniqu'+
   'e segment)'#010+
   '8*2Wm<x>_Set memory model'#010+
   '8*3WmTiny_Tiny memory model'#010+
   '8*3WmSmall_Small memory model (default)'#010+
-  '8*3WmMedium_Medium memory model'#010+
-  '8*3WmCompact_Compact memory m','odel'#010+
+  '8*3WmMedi','um_Medium memory model'#010+
+  '8*3WmCompact_Compact memory model'#010+
   '8*3WmLarge_Large memory model'#010+
   '8*3WmHuge_Huge memory model'#010+
   '3*2WM<x>_Minimum Mac OS X deployment version: 10.4, 10.5.1, ... (Darwi'+
   'n)'#010+
-  '4*2WM<x>_Minimum Mac OS X deployment version: 10.4, 10.5.1, ... (Darwi'+
-  'n)'#010+
-  'p*2WM<x>_Minimum Mac OS X deplo','yment version: 10.4, 10.5.1, ... (Dar'+
+  '4*2WM<x>_Minimum Mac OS X deployment version: 10.4, ','10.5.1, ... (Dar'+
   'win)'#010+
+  'p*2WM<x>_Minimum Mac OS X deployment version: 10.4, 10.5.1, ... (Darwi'+
+  'n)'#010+
   'P*2WM<x>_Minimum Mac OS X deployment version: 10.4, 10.5.1, ... (Darwi'+
   'n)'#010+
   '3*2WN_Do not generate relocation code, needed for debugging (Windows)'#010+
-  '4*2WN_Do not generate relocation code, needed for debug','ging (Windows'+
+  '4*2','WN_Do not generate relocation code, needed for debugging (Windows'+
   ')'#010+
   'A*2WN_Do not generate relocation code, needed for debugging (Windows)'#010+
   'A*2Wp<x>_Specify the controller type; see fpc -i or fpc -iu for possib'+
   'le values'#010+
-  'm*2Wp<x>_Specify the controller type; see fpc -i or fpc -iu for possib'+
-  'le va','lues'#010+
+  'm*2Wp<x>_Specify the co','ntroller type; see fpc -i or fpc -iu for poss'+
+  'ible values'#010+
   'V*2Wp<x>_Specify the controller type; see fpc -i or fpc -iu for possib'+
   'le values'#010+
   '3*2WP<x>_Minimum iOS deployment version: 3.0, 5.0.1, ... (iphonesim)'#010+
-  '4*2WP<x>_Minimum iOS deployment version: 8.0, 8.0.2, ... (iphonesim)'#010+
-  'a*2WP<x>_Minimum ','iOS deployment version: 7.0, 7.1.2, ... (Darwin)'#010+
+  '4*2WP<x>_Minimum iOS deployment ve','rsion: 8.0, 8.0.2, ... (iphonesim)'+
+  #010+
+  'a*2WP<x>_Minimum iOS deployment version: 7.0, 7.1.2, ... (Darwin)'#010+
   'A*2WP<x>_Minimum iOS deployment version: 3.0, 5.0.1, ... (Darwin)'#010+
   '3*2WR_Generate relocation code (Windows)'#010+
-  '4*2WR_Generate relocation code (Windows)'#010+
+  '4*2WR_Generate relocation code (','Windows)'#010+
   'A*2WR_Generate relocation code (Windows)'#010+
-  '8*','2Wt<x>_Set the target executable format'#010+
+  '8*2Wt<x>_Set the target executable format'#010+
   '8*3Wtexe_Create a DOS .EXE file (default)'#010+
   '8*3Wtcom_Create a DOS .COM file (requires tiny memory model)'#010+
-  'P*2WT_Specify MPW tool type application (Classic Mac OS)'#010+
+  'P*2WT_Specify MPW tool type application (Clas','sic Mac OS)'#010+
   '**2WX_Enable executable stack (Linux)'#010+
-  '**','1X_Executable options:'#010+
+  '**1X_Executable options:'#010+
   '**2X9_Generate linkerscript for GNU Binutils ld older than version 2.1'+
   '9.1 (Linux)'#010+
   '**2Xc_Pass --shared/-dynamic to the linker (BeOS, Darwin, FreeBSD, Lin'+
   'ux)'#010+
-  '**2Xd_Do not search default library path (sometimes required ','for cro'+
+  '**2Xd_Do ','not search default library path (sometimes required for cro'+
   'ss-compiling when not using -XR)'#010+
   '**2Xe_Use external linker'#010+
   '**2Xf_Substitute pthread library name for linking (BSD)'#010+
-  '**2Xg_Create debuginfo in a separate file and add a debuglink section '+
-  'to executable'#010+
-  '**2XD_Try to link units dynamicall','y      (defines FPC_LINK_DYNAMIC)'#010+
+  '**2Xg_Create debuginfo in a separate file and add a debuglink sect','io'+
+  'n to executable'#010+
+  '**2XD_Try to link units dynamically      (defines FPC_LINK_DYNAMIC)'#010+
   '**2Xi_Use internal linker'#010+
   '**2XLA_Define library substitutions for linking'#010+
   '**2XLO_Define order of library linking'#010+
-  '**2XLD_Exclude default order of standard libraries'#010+
+  '**2XLD_Exclude default order of standard ','libraries'#010+
   '**2Xm_Generate link map'#010+
-  '**2XM<x>_Set the n','ame of the '#039'main'#039' program routine (default'+
-  ' is '#039'main'#039')'#010+
+  '**2XM<x>_Set the name of the '#039'main'#039' program routine (default i'+
+  's '#039'main'#039')'#010+
   '**2Xn_Use target system native linker instead of GNU ld (Solaris, AIX)'+
   #010+
-  'F*2Xp<x>_First search for the compiler binary in the directory <x>'#010+
-  '**2XP<x>_Prepend the binutils names with the pre','fix <x>'#010+
+  'F*2Xp<x>_First search for the compiler binary in the directory ','<x>'#010+
+  '**2XP<x>_Prepend the binutils names with the prefix <x>'#010+
   '**2Xr<x>_Set the linker'#039's rlink-path to <x> (needed for cross comp'+
   'ile, see the ld manual for more information) (BeOS, Linux)'#010+
-  '**2XR<x>_Prepend <x> to all linker search paths (BeOS, Darwin, FreeBSD'+
-  ', Linux, Mac OS, Solaris)'#010+
-  '**2Xs_Strip',' all symbols from executable'#010+
+  '**2XR<x>_Prepend <x> to all linker search paths (BeOS, ','Darwin, FreeB'+
+  'SD, Linux, Mac OS, Solaris)'#010+
+  '**2Xs_Strip all symbols from executable'#010+
   '**2XS_Try to link units statically (default, defines FPC_LINK_STATIC)'#010+
   '**2Xt_Link with static libraries (-static is passed to linker)'#010+
-  '**2Xv_Generate table for Virtual Entry calls'#010+
-  '**2XV_Use VLink as external linke','r       (default on Amiga, MorphOS)'+
-  #010+
+  '**2Xv_Generate table for V','irtual Entry calls'#010+
+  '**2XV_Use VLink as external linker       (default on Amiga, MorphOS)'#010+
   '**2XX_Try to smartlink units             (defines FPC_LINK_SMART)'#010+
   '**1*_'#010+
   '**1?_Show this help'#010+

compiler/x86/rax86att.pas

@@ -786,7 +786,7 @@ Implementation
       var
         operandnum : longint;
         PrefixOp,OverrideOp: tasmop;
-        di_param: ShortInt;
+        di_param, si_param: ShortInt;
       Begin
         PrefixOp:=A_None;
         OverrideOp:=A_None;
@@ -901,16 +901,68 @@ Implementation
         { Check for invalid ES: overrides }
         if is_x86_parameterized_string_op(instr.opcode) then
           begin
+            si_param:=get_x86_string_op_si_param(instr.opcode);
+            if si_param<>-1 then
+              begin
+                si_param:=x86_parameterized_string_op_param_count(instr.opcode)-si_param;
+                if si_param<=operandnum then
+                  with instr.operands[si_param] do
+                    if (opr.typ=OPR_REFERENCE) then
+                      begin
+                        if not((((opr.ref.index<>NR_NO) and
+                                 (opr.ref.base=NR_NO) and
+                                 (getregtype(opr.ref.index)=R_INTREGISTER) and
+                                 (getsupreg(opr.ref.index)=RS_ESI)) or
+                                ((opr.ref.index=NR_NO) and
+                                 (opr.ref.base<>NR_NO) and
+                                 (getregtype(opr.ref.base)=R_INTREGISTER) and
+                                 (getsupreg(opr.ref.base)=RS_ESI))) and
+                               (opr.ref.offset=0) and
+                               (opr.ref.scalefactor<=1) and
+                               (opr.ref.refaddr=addr_no) and
+                               (opr.ref.symbol=nil) and
+                               (opr.ref.relsymbol=nil)) then
+{$if defined(i8086)}
+                          Message1(asmr_w_invalid_reference,'(%si)');
+{$elseif defined(i386)}
+                          Message1(asmr_w_invalid_reference,'(%esi)');
+{$elseif defined(x86_64)}
+                          Message1(asmr_w_invalid_reference,'(%rsi)');
+{$endif}
+                      end;
+              end;
             di_param:=get_x86_string_op_di_param(instr.opcode);
             if di_param<>-1 then
               begin
                 di_param:=x86_parameterized_string_op_param_count(instr.opcode)-di_param;
                 if di_param<=operandnum then
                   with instr.operands[di_param] do
-                    if (opr.typ=OPR_REFERENCE) and
-                       (opr.ref.segment<>NR_NO) and
-                       (opr.ref.segment<>NR_ES) then
-                      Message(asmr_e_cannot_override_es_segment);
+                    if (opr.typ=OPR_REFERENCE) then
+                      begin
+                        if (opr.ref.segment<>NR_NO) and
+                           (opr.ref.segment<>NR_ES) then
+                          Message(asmr_e_cannot_override_es_segment);
+                        if not((((opr.ref.index<>NR_NO) and
+                                 (opr.ref.base=NR_NO) and
+                                 (getregtype(opr.ref.index)=R_INTREGISTER) and
+                                 (getsupreg(opr.ref.index)=RS_EDI)) or
+                                ((opr.ref.index=NR_NO) and
+                                 (opr.ref.base<>NR_NO) and
+                                 (getregtype(opr.ref.base)=R_INTREGISTER) and
+                                 (getsupreg(opr.ref.base)=RS_EDI))) and
+                               (opr.ref.offset=0) and
+                               (opr.ref.scalefactor<=1) and
+                               (opr.ref.refaddr=addr_no) and
+                               (opr.ref.symbol=nil) and
+                               (opr.ref.relsymbol=nil)) then
+{$if defined(i8086)}
+                          Message1(asmr_w_invalid_reference,'(%di)');
+{$elseif defined(i386)}
+                          Message1(asmr_w_invalid_reference,'(%edi)');
+{$elseif defined(x86_64)}
+                          Message1(asmr_w_invalid_reference,'(%edi)');
+{$endif}
+                      end;
               end;
           end;
       end;