+ aktpackenum

compiler/errorn.msg

@@ -64,13 +64,15 @@ scan_u_start_include_file=U_Ingevoegd bestand $1 word geopend
 scan_w_comment_level=W_Commentaar diepte $1 gevonden
 scan_n_far_directive_ignored=N_$F directive (FAR) genegeerd
 scan_n_stack_check_global_under_linux=N_Stapeloverloop test is globaal onder linux
-scan_w_illegal_switch=W_Foutieve compiler schakelaar
+scan_n_ignored_switch=N_Genegeerde compiler schakelaar $1
+scan_w_illegal_switch=W_Foutieve compiler schakelaar $1
 scan_w_switch_is_global=W_Deze compiler schakelaar heeft ook een globaal effect
 scan_e_illegal_char_const=E_Foutieve constante voor een karakter
 scan_f_cannot_open_input=F_kan bestand niet openen
 scan_f_cannot_open_includefile=F_Kan ingevoerd bestand niet openen $1
 scan_e_too_much_endifs=E_Te veel $ENDIFs of $ELSEs
 scan_w_only_pack_records=W_Record velden kunnen maar op 1,2 of 4 bytes uitgelijnd worden.
+scan_w_only_pack_enum=W_Enumerated kan alleen worden bewaard in 1,2 of 4 bytes
 scan_e_endif_expected=E_$ENDIF verwacht voor $1 op $2 $3
 scan_e_preproc_syntax_error=E_Taalfout bij het compileren van een conditionele compilatie uitdrukking
 scan_e_error_in_preproc_expr=E_Evalueren van een conditionele compilatie uitdrukking

compiler/msgidx.inc

@@ -17,6 +17,7 @@ type tmsgconst=(
   scan_w_comment_level,
   scan_n_far_directive_ignored,
   scan_n_stack_check_global_under_linux,
+  scan_n_ignored_switch,
   scan_w_illegal_switch,
   scan_w_switch_is_global,
   scan_e_illegal_char_const,
@@ -24,6 +25,7 @@ type tmsgconst=(
   scan_f_cannot_open_includefile,
   scan_e_too_much_endifs,
   scan_w_only_pack_records,
+  scan_w_only_pack_enum,
   scan_e_endif_expected,
   scan_e_preproc_syntax_error,
   scan_e_error_in_preproc_expr,

compiler/msgtxt.inc

@@ -17,555 +17,558 @@ const msgtxt : array[0..00084,1..240] of char=(+
   'W_Comment level $1 found'#000+
   'N_$F directive (FAR) ignored'#000+
   'N_Stack check is global under linux'#000+
-  'W_Illegal compiler switch'#000+
-  'W_This compiler switch ','has a global effect'#000+
+  'N_Ignored compiler switch $1'#000+
+  'W_Illegal compiler s','witch $1'#000+
+  'W_This compiler switch has a global effect'#000+
   'E_Illegal char constant'#000+
   'F_Can'#039't open file $1'#000+
   'F_Can'#039't open include file $1'#000+
   'E_Too many $ENDIFs or $ELSEs'#000+
   'W_Records fields can be aligned to 1,2,4 or 16 bytes only'#000+
+  'W_Enumerated can be saved i','n 1,2 or 4 bytes only'#000+
   'E_$1 expected for $2 defined in line $3'#000+
-  'E_Syntax error whil','e parsing a conditional compiling expression'#000+
+  'E_Syntax error while parsing a conditional compiling expression'#000+
   'E_Evaluating a conditional compiling expression'#000+
   'W_Macro contents is cut after char 255 to evalute expression'#000+
-  'E_ENDIF without IF(N)DEF'#000+
+  'E_END','IF without IF(N)DEF'#000+
   'F_User defined: $1'#000+
   'E_User defined: $1'#000+
   'W_User defined: $1'#000+
-  'N_Us','er defined: $1'#000+
+  'N_User defined: $1'#000+
   'H_User defined: $1'#000+
   'I_User defined: $1'#000+
   'E_Keyword redefined as macro has no effect'#000+
   'F_Macro buffer overflow while reading or expanding a macro'#000+
-  'W_Extension of macros exceeds a deep of 16, perhaps there is a recursi'+
-  've macro defini','tion (crashes the compiler)'#000+
+  'W_Ex','tension of macros exceeds a deep of 16, perhaps there is a recur'+
+  'sive macro definition (crashes the compiler)'#000+
   'E_compiler switches aren'#039't allowed in (* ... *) styled comments'#000+
   'D_Handling switch "$1"'#000+
   'C_ENDIF $1 found'#000+
   'C_IFDEF $1 found, $2'#000+
-  'C_IFOPT $1 found, $2'#000+
+  'C_IFOP','T $1 found, $2'#000+
   'C_IF $1 found, $2'#000+
   'C_IFNDEF $1 found, $2'#000+
   'C_ELSE $1 found, $2'#000+
-  'C_Skip','ping until...'#000+
+  'C_Skipping until...'#000+
   'I_Press <return> to continue'#000+
   'W_Unsupported switch $1'#000+
   'W_Illegal compiler directive $1'#000+
   'D_Back in $1'#000+
   'W_Unsupported assembler style specified $1'#000+
-  'E_Parser - Syntax Error'#000+
+  'E_Pa','rser - Syntax Error'#000+
   'W_Procedure type FAR ignored'#000+
   'W_Procedure type NEAR ignored'#000+
-  'E_','No DLL File specified'#000+
+  'E_No DLL File specified'#000+
   'E_Constructor name must be INIT'#000+
   'E_Destructor name must be DONE'#000+
   'E_Illegal open parameter'#000+
   'E_Procedure type INLINE not supported'#000+
-  'W_Private methods shouldn'#039't be VIRTUAL'#000+
+  'W_Private m','ethods shouldn'#039't be VIRTUAL'#000+
   'W_Constructor should be public'#000+
-  'W_Destructor should be',' public'#000+
+  'W_Destructor should be public'#000+
   'N_Class should have one destructor only'#000+
   'E_Local class definitions are not allowed'#000+
   'E_Anonym class definitions are not allowed'#000+
   'E_Ordinal value expected'#000+
-  'E_Illegal parameter list'#000+
+  'E','_Illegal parameter list'#000+
   'E_overloaded identifier isn'#039't a function identifier'#000+
-  'E_ove','rloaded functions have the same parameter list'#000+
+  'E_overloaded functions have the same parameter list'#000+
   'E_function header doesn'#039't match the forward declaration $1'#000+
-  'N_only values can be jumped over in enumeration types'#000+
+  'N_only values can be jumped over in enumeration types',#000+
   'N_Interface and implementation names are different !'#000+
   'E_function nesting > 31'#000+
-  'E_r','ange check error while evaluating constants'#000+
+  'E_range check error while evaluating constants'#000+
   'E_pointer type expected'#000+
   'E_class type expected'#000+
   'E_duplicate case label'#000+
   'E_typed constants of classes are not allowed'#000+
-  'E_functions variables of overloaded functions are not allowed'#000+
-  'E_string length must',' be a value from 1 to 255'#000+
+  'E','_functions variables of overloaded functions are not allowed'#000+
+  'E_string length must be a value from 1 to 255'#000+
   'W_use extended syntax of DISPOSE and NEW to generate instances of obje'+
   'cts'#000+
   'E_class identifier expected'#000+
   'E_method identifier expected'#000+
-  'E_function header doesn'#039't match any method of this class'#000+
+  'E_','function header doesn'#039't match any method of this class'#000+
   'P_procedure/function $1'#000+
-  'E_','Illegal floating point constant'#000+
+  'E_Illegal floating point constant'#000+
   'E_FAIL can be used in constructors only'#000+
   'E_Destructors can'#039't have parameters'#000+
   'E_string types doesn'#039't match, because of $V+ mode'#000+
-  'E_Only class methods can be referred with class references'#000+
-  'E_Only class methods ca','n be accessed in class methods'#000+
+  'E','_Only class methods can be referred with class references'#000+
+  'E_Only class methods can be accessed in class methods'#000+
   'E_Constant and CASE types do not match'#000+
   'E_The symbol can'#039't be exported from a library'#000+
   'W_A inherited method is hidden by $1'#000+
-  'E_There is no method in an ancestor class to be overridden: $1'#000+
-  'E_No member is provided ','to access property'#000+
+  'E_Ther','e is no method in an ancestor class to be overridden: $1'#000+
+  'E_No member is provided to access property'#000+
   'E_Illegal symbol for property access'#000+
   'E_Cannot access a protected field of an object here'#000+
   'E_Cannot access a private field of an object here'#000+
-  'E_all overloaded methods must be virtual if one is virtual: $1'#000+
-  'E_overloaded method','s which are virtual must have the same return typ'+
-  'e: $1'#000+
+  'E','_all overloaded methods must be virtual if one is virtual: $1'#000+
+  'E_overloaded methods which are virtual must have the same return type:'+
+  ' $1'#000+
   'E_EXPORT declared functions can'#039't be nested'#000+
   'E_methods can'#039't be EXPORTed'#000+
-  'E_call by var parameters have to match exactly'#000+
+  'E_call by var parameters have to',' match exactly'#000+
   'E_Class isn'#039't a super class of the current class'#000+
-  'E_SELF is only al','lowed in methods'#000+
+  'E_SELF is only allowed in methods'#000+
   'E_methods can be only in other methods called direct with type identif'+
   'ier of the class'#000+
   'E_Illegal use of '#039':'#039#000+
-  'E_range check error in set constructor or duplicate set element'#000+
+  'E_range check error in set constru','ctor or duplicate set element'#000+
   'E_Pointer to class expected'#000+
-  'E_Expression must be co','nstructor call'#000+
+  'E_Expression must be constructor call'#000+
   'E_Expression must be destructor call'#000+
   'E_Type conflict between set elements'#000+
-  'W_Using / will give a floating point result, use DIV instead to get an'+
+  'W_Using / will give a floating point result, use DIV instead to get an',+
   ' integer result'#000+
   'E_Illegal order of record elements'#000+
-  'E_Expression type must by clas','s or record type'#000+
+  'E_Expression type must by class or record type'#000+
   'E_Functions with void return value can'#039't return any value'#000+
   'E_constructors and destructors must be methods'#000+
-  'W_Automatic type conversion from floating type to COMP which is an int'+
-  'eger type'#000+
+  'W_Automatic type conversion from floa','ting type to COMP which is an i'+
+  'nteger type'#000+
   'E_Operator is not overloaded'#000+
-  'E_Variabl','e or type indentifier expected'#000+
+  'E_Variable or type indentifier expected'#000+
   'E_Re-raise isn'#039't possible there'#000+
   'E_The extended syntax of new or dispose isn'#039't allowed for a class'#000+
-  'E_Assembler incompatible with function return value'#000+
+  'E_Assembler incompatible with ','function return value'#000+
   'E_Procedure overloading is switched off'#000+
-  'E_It is not possibl','e to overload this operator (overload = instead)'#000+
+  'E_It is not possible to overload this operator (overload = instead)'#000+
   'E_Comparative operator must return a boolean value'#000+
   'E_Only virtual methods can be abstract'#000+
-  'F_Use of unsupported feature!'#000+
+  'F_Use of unsupported',' feature!'#000+
   'E_The mix of CLASSES and OBJECTS isn'#039't allowed'#000+
-  'W_Unknown procedure dire','ctive had to be ignored: $1'#000+
+  'W_Unknown procedure directive had to be ignored: $1'#000+
   'E_absolute can only be associated to ONE variable'#000+
   'E_absolute can only be associated a var or const'#000+
-  'E_Abtract methods shouldn'#039't have any definition (with function bod'+
-  'y)'#000+
-  'E_This overloaded function can'#039't be local (m','ust be exported)'#000+
+  'E_Abtract methods shouldn'#039't have',' any definition (with function b'+
+  'ody)'#000+
+  'E_This overloaded function can'#039't be local (must be exported)'#000+
   'E_succ or pred on enums with assignments not possible'#000+
   'W_Virtual methods are used without a constructor in $1'#000+
   'M_Macro defined: $1'#000+
-  'M_Macro undefined: $1'#000+
+  'M_Macro undef','ined: $1'#000+
   'M_Macro $1 set to $2'#000+
   'I_Compiling $1'#000+
   'D_Compiling $1 for the second time'#000+
-  'E','_Array properties aren'#039't allowed at this point'#000+
+  'E_Array properties aren'#039't allowed at this point'#000+
   'E_No property found to override'#000+
   'E_Only one default property is allowed, found inherited default proper'+
-  'ty in class %1'#000+
+  'ty in clas','s %1'#000+
   'E_The default property must be an array property'#000+
-  'E_Virtual constructors are ','only supported in class object model'#000+
+  'E_Virtual constructors are only supported in class object model'#000+
   'E_No default property available'#000+
   'E_The class can'#039't have a published section, use the {$M+} switch'#000+
-  'E_Forward declaration of class $1 must be resolved here to use the cla'+
-  'ss as anchestor'#000+
-  'E_Local operators no','t supported'#000+
+  'E_Forward declaration of ','class $1 must be resolved here to use the c'+
+  'lass as anchestor'#000+
+  'E_Local operators not supported'#000+
   'E_Procedure directive $1 not allowed in interface section'#000+
   'E_Procedure directive $1 not allowed in implementation section'#000+
-  'E_Procedure directive $1 not allowed in procvar declaration'#000+
-  'E_Function is already declared Public/Forward $','1'#000+
+  'E_Procedure directive $1 n','ot allowed in procvar declaration'#000+
+  'E_Function is already declared Public/Forward $1'#000+
   'E_Can'#039't use both EXPORT and EXTERNAL'#000+
   'E_NAME keyword expected'#000+
   'W_$1 not yet supported inside inline procedure/function'#000+
   'W_Inlining disabled'#000+
-  'I_Writing Browser log $1'#000+
+  'I_Writing Browser lo','g $1'#000+
   'H_may be pointer deref ^ is missing'#000+
-  'F_Selected assembler reader not supporte','d'#000+
+  'F_Selected assembler reader not supported'#000+
   'W_Local variable $1 doesn'#039't seem to be initialized yet !'#000+
   'E_Identifier not found $1'#000+
   'F_Internal Error in SymTableStack()'#000+
   'E_Duplicate identifier $1'#000+
-  'E_Unknown identifier $1'#000+
+  'E_Unknown id','entifier $1'#000+
   'E_Forward declaration not solved: $1'#000+
-  'F_Identifier type already define','d as type'#000+
+  'F_Identifier type already defined as type'#000+
   'E_Type identifier expected'#000+
   'E_Type mismatch'#000+
   'E_Error in type defenition'#000+
   'E_Type identifier not defined'#000+
-  'E_Only static variables can be used in static methods or outside metho'+
-  'ds'#000+
+  'E_Only static variables can be used in static met','hods or outside met'+
+  'hods'#000+
   'E_Invalid call to tvarsym.mangledname()'#000+
-  'F_record or class',' type expected'#000+
+  'F_record or class type expected'#000+
   'E_To generate an instance of a class or an object with an abtract meth'+
   'od isn'#039't allowed'#000+
   'E_Label not defined $1'#000+
   'E_Illegal label declaration'#000+
-  'E_GOTO und LABEL are not supported (use command line switch -Sg)'#000+
+  'E_GOTO',' und LABEL are not supported (use command line switch -Sg)'#000+
   'E_Label not found'#000+
-  'E_id','entifier isn'#039't a label'#000+
+  'E_identifier isn'#039't a label'#000+
   'E_label already defined'#000+
   'E_illegal type declaration of set elements'#000+
   'E_Forward class definition not resolved $1'#000+
   'H_Parameter not used $1'#000+
-  'W_Local variable not used $1'#000+
+  'W_','Local variable not used $1'#000+
   'E_Set elements are not compatible'#000+
-  'E_Set type expected'#000,+
+  'E_Set type expected'#000+
   'W_Function result does not seem to be set'#000+
   'E_Unknown field identifier'#000+
   'W_Local variable $1 does not seem to be initialized'#000+
   'E_identifier idents no member $1'#000+
-  'E_BREAK not allowed'#000+
+  'E_BRE','AK not allowed'#000+
   'E_CONTINUE not allowed'#000+
-  'E_Expression too complicated - FPU stack ov','erflow'#000+
+  'E_Expression too complicated - FPU stack overflow'#000+
   'E_Illegal expression'#000+
   'E_Invalid integer'#000+
   'E_Illegal qualifier'#000+
   'E_High range limit < low range limit'#000+
   'E_Illegal counter variable'#000+
-  'E_Can'#039't determine which overloaded function to call'#000+
+  'E_Can'#039't determine which overl','oaded function to call'#000+
   'E_Parameter list size exceeds 65535 bytes'#000+
-  'E_Illegal type c','onversion'#000+
+  'E_Illegal type conversion'#000+
   'E_File types must be var parameters'#000+
   'E_The use of a far pointer isn'#039't allowed there'#000+
   'E_illegal call by reference parameters'#000+
-  'E_EXPORT declared functions can'#039't be called'#000+
-  'W_Possible illegal call of constructor or destructor (doesn'#039't ma','t'+
-  'ch to this context)'#000+
+  'E_EXPORT declared functions',' can'#039't be called'#000+
+  'W_Possible illegal call of constructor or destructor (doesn'#039't matc'+
+  'h to this context)'#000+
   'N_Inefficient code'#000+
   'W_unreachable code'#000+
   'E_procedure call with stackframe ESP/SP'#000+
   'E_Abstract methods can'#039't be called directly'#000+
-  'F_Internal Error in getfloatreg(), allocation failure'#000+
+  'F_Internal Error',' in getfloatreg(), allocation failure'#000+
   'F_Unknown float type'#000+
-  'F_SecondVecn() base de','fined twice'#000+
+  'F_SecondVecn() base defined twice'#000+
   'F_Extended cg68k not supported'#000+
   'F_32-bit unsigned not supported in MC68000 mode'#000+
   'F_Internal Error in secondinline()'#000+
   'D_Register $1 weight $2 $3'#000+
-  'E_Stack limit excedeed in local routine'#000+
+  'E_Stac','k limit excedeed in local routine'#000+
   'D_Stack frame is omited'#000+
-  'E_Unable to inline obje','ct methods'#000+
+  'E_Unable to inline object methods'#000+
   'E_Unable to inline procvar calls'#000+
   'E_No code for inline procedure stored'#000+
   'F_Divide by zero in asm evaluator'#000+
   'F_Evaluator stack overflow'#000+
-  'F_Evaluator stack underflow'#000+
+  'F_Evaluator stac','k underflow'#000+
   'F_Invalid numeric format in asm evaluator'#000+
-  'F_Invalid Operator in asm e','valuator'#000+
+  'F_Invalid Operator in asm evaluator'#000+
   'F_Unknown error in asm evaluator'#000+
   'W_Invalid numeric value'#000+
   'E_escape sequence ignored: $1'#000+
   'E_Asm syntax error - Prefix not found'#000+
-  'E_Asm syntax error - Trying to add more than one prefix'#000+
+  'E_Asm syntax error - Tryi','ng to add more than one prefix'#000+
   'E_Asm syntax error - Opcode not found'#000+
-  'E_Invalid sy','mbol reference'#000+
+  'E_Invalid symbol reference'#000+
   'W_Calling an overload function in an asm'#000+
   'E_Constant value out of bounds'#000+
   'E_Non-label pattern contains @'#000+
   'E_Invalid Operand: $1'#000+
-  'W_Override operator not supported'#000+
+  'W_Override operator',' not supported'#000+
   'E_Error in binary constant: $1'#000+
   'E_Error in octal constant: $1'#000+
-  'E_Err','or in hexadecimal constant: $1'#000+
+  'E_Error in hexadecimal constant: $1'#000+
   'E_Error in integer constant: $1'#000+
   'E_Invalid labeled opcode'#000+
   'F_Internal error in Findtype()'#000+
   'E_Invalid size for MOVSX/MOVZX'#000+
-  'E_16-bit base in 32-bit segment'#000+
+  'E_16-bit ','base in 32-bit segment'#000+
   'E_16-bit index in 32-bit segment'#000+
   'E_Invalid Opcode'#000+
-  'E_Consta','nt reference not allowed'#000+
+  'E_Constant reference not allowed'#000+
   'W_Fwait can cause emulation problems with emu387'#000+
   'E_Invalid combination of opcode and operands'#000+
-  'W_Opcode $1 not in table, operands not checked'#000+
+  'W_Opcode $1 not in table, operands not c','hecked'#000+
   'F_Internal Error in ConcatOpcode()'#000+
   'E_Invalid size in reference'#000+
-  'E_Invalid m','iddle sized operand'#000+
+  'E_Invalid middle sized operand'#000+
   'E_Invalid three operand opcode'#000+
   'E_Assembler syntax error'#000+
   'E_Invalid operand type'#000+
   'E_Segment overrides not supported'#000+
-  'E_Invalid constant symbol $1'#000+
+  'E_Invalid constant symbol ','$1'#000+
   'F_Internal Errror converting binary'#000+
   'F_Internal Errror converting hexadecimal'#000+
-  'F','_Internal Errror converting octal'#000+
+  'F_Internal Errror converting octal'#000+
   'E_Invalid constant expression'#000+
   'E_Unknown identifier: $1'#000+
   'E_Trying to define an index register more than once'#000+
-  'E_Invalid field specifier'#000+
+  'E_Invalid field sp','ecifier'#000+
   'F_Internal Error in BuildScaling()'#000+
   'E_Invalid scaling factor'#000+
-  'E_Invalid sca','ling value'#000+
+  'E_Invalid scaling value'#000+
   'E_Scaling value only allowed with index'#000+
   'E_Invalid assembler syntax. No ref with brackets)'#000+
-  'E_Expressions of the form [sreg:reg...] are currently not supported'#000+
+  'E_Expressions of the form [sreg:reg...] are currently not ','supported'#000+
   'E_Trying to define a segment register twice'#000+
-  'E_Trying to define a base r','egister twice'#000+
+  'E_Trying to define a base register twice'#000+
   'E_Trying to use a negative index register'#000+
   'E_Asm syntax error - error in reference'#000+
   'E_Local symbols not allowed as references'#000+
-  'E_Invalid operand in bracket expression'#000+
+  'E_Invalid operand in ','bracket expression'#000+
   'E_Invalid symbol name: $1'#000+
   'E_Invalid Reference syntax'#000+
-  'E_Invalid',' string as opcode operand: $1'#000+
+  'E_Invalid string as opcode operand: $1'#000+
   'W_@CODE and @DATA not supported'#000+
   'E_Null label references are not allowed'#000+
   'E_Cannot use SELF outside a method'#000+
-  'E_Asm syntax error - Should start with bracket'#000+
+  'E_Asm syntax error - S','hould start with bracket'#000+
   'E_Asm syntax error - register: $1'#000+
-  'E_SEG and OFFSET not s','upported'#000+
+  'E_SEG and OFFSET not supported'#000+
   'E_Asm syntax error - in opcode operand'#000+
   'E_Invalid String expression'#000+
   'E_Constant expression out of bounds'#000+
   'F_Internal Error in BuildConstant()'#000+
-  'W_A repeat prefix and a segment override on <= i386 may result in erro'+
-  'rs if an interrupt occ','urs'#000+
+  'W_A repeat ','prefix and a segment override on <= i386 may result in er'+
+  'rors if an interrupt occurs'#000+
   'E_Invalid or missing opcode'#000+
   'E_Invalid combination of prefix and opcode: $1'#000+
   'E_Invalid combination of override and opcode: $1'#000+
   'E_Too many operands on line'#000+
-  'E_Duplicate local symbol: $1'#000+
+  'E_D','uplicate local symbol: $1'#000+
   'E_Unknown label identifer: $1'#000+
-  'E_Assemble node syntax er','ror'#000+
+  'E_Assemble node syntax error'#000+
   'E_Undefined local symbol: $1'#000+
   'D_Starting intel styled assembler parsing...'#000+
   'D_Finished intel styled assembler parsing...'#000+
-  'E_Not a directive or local symbol: $1'#000+
+  'E_Not a directive or local symbol: $','1'#000+
   'E_/ at beginning of line not allowed'#000+
   'E_NOR not supported'#000+
-  'E_Invalid floating poi','nt register name'#000+
+  'E_Invalid floating point register name'#000+
   'W_Modulo not supported'#000+
   'E_Invalid floating point constant: $1'#000+
   'E_Size suffix and destination register do not match'#000+
-  'E_Internal error in ConcatLabeledInstr()'#000+
+  'E_Internal error in ConcatLab','eledInstr()'#000+
   'W_Floating point binary representation ignored'#000+
-  'W_Floating point hexad','ecimal representation ignored'#000+
+  'W_Floating point hexadecimal representation ignored'#000+
   'W_Floating point octal representation ignored'#000+
   'E_Invalid real constant expression'#000+
   'E_Parenthesis are not allowed'#000+
-  'E_Invalid Reference'#000+
+  'E_Invalid Referenc','e'#000+
   'E_Cannot use __SELF outside a method'#000+
-  'E_Cannot use __OLDEBP outside a nested pro','cedure'#000+
+  'E_Cannot use __OLDEBP outside a nested procedure'#000+
   'W_Identifier $1 supposed external'#000+
   'E_Invalid segment override expression'#000+
   'E_Strings not allowed as constants'#000+
   'D_Starting AT&T styled assembler parsing...'#000+
-  'D_Finished AT&T styled assembler parsing...'#000+
-  'E_Switching sections is not allowed in',' an assembler block'#000+
+  'D','_Finished AT&T styled assembler parsing...'#000+
+  'E_Switching sections is not allowed in an assembler block'#000+
   'E_Invalid global definition'#000+
   'E_Line separator expected'#000+
   'W_globl not supported'#000+
   'W_align not supported'#000+
   'W_lcomm not supported'#000+
-  'W_comm not supported'#000+
+  'W_comm not supporte','d'#000+
   'E_Invalid local common definition'#000+
   'E_Invalid global common definition'#000+
-  'E_local sy','mbol: $1 not found inside asm statement'#000+
+  'E_local symbol: $1 not found inside asm statement'#000+
   'E_assembler code not returned to text'#000+
   'F_internal error in BuildReference()'#000+
   'E_invalid opcode size'#000+
   'W_NEAR ignored'#000+
-  'W_FAR ignored'#000+
+  'W_FAR i','gnored'#000+
   'D_Creating inline asm lookup tables'#000+
-  'W_Using a defined name as a local labe','l'#000+
+  'W_Using a defined name as a local label'#000+
   'F_internal error in HandleExtend()'#000+
   'E_Invalid character: <'#000+
   'E_Invalid character: >'#000+
   'E_Unsupported opcode'#000+
   'E_Increment and Decrement mode not allowed together'#000+
-  'E_Invalid Register list in movem/fmovem'#000+
+  'E_I','nvalid Register list in movem/fmovem'#000+
   'E_Invalid Register list for opcode'#000+
-  'E_68020+ ','mode required to assemble'#000+
+  'E_68020+ mode required to assemble'#000+
   'D_Starting Motorola styled assembler parsing...'#000+
   'D_Finished Motorola styled assembler parsing...'#000+
   'W_XDEF not supported'#000+
-  'W_Functions with void return value can'#039't return any value in asm c'+
-  'ode'#000+
-  'E_Invalid suffix for intel ','assembler'#000+
+  'W_Functions with',' void return value can'#039't return any value in asm'+
+  ' code'#000+
+  'E_Invalid suffix for intel assembler'#000+
   'E_Extended not supported in this mode'#000+
   'E_Comp not supported in this mode'#000+
   'W_You need GNU as version >= 2.81 to compile this MMX code'#000+
-  'F_Too many assembler files'#000+
+  'F_Too many assembl','er files'#000+
   'F_Selected assembler output not supported'#000+
-  'E_Unsupported symbol type for ','operand'#000+
+  'E_Unsupported symbol type for operand'#000+
   'I_Assembling (pipe) $1'#000+
   'E_Can'#039't create assember file $1'#000+
   'W_Assembler $1 not found, switching to external assembling'#000+
   'U_Using assembler: $1'#000+
-  'W_Error while assembling'#000+
+  'W_Error while a','ssembling'#000+
   'W_Can'#039't call the assembler, switching to external assembling'#000+
-  'I_Assembli','ng $1'#000+
+  'I_Assembling $1'#000+
   'W_Linker $1 not found, switching to external linking'#000+
   'U_Using linker: $1'#000+
   'W_Object $1 not found, Linking may fail !'#000+
-  'W_Library $1 not found, Linking may fail !'#000+
+  'W_Library $1 not found, Linking may fai','l !'#000+
   'W_Error while linking'#000+
-  'W_Can'#039't call the linker, switching to external linking'#000,+
+  'W_Can'#039't call the linker, switching to external linking'#000+
   'I_Linking $1'#000+
   'W_binder not found, switching to external binding'#000+
   'W_ar not found, switching to external ar'#000+
   'E_Dynamic Libraries not supported'#000+
   'I_Closing script $1'#000+
-  'U_PPU Loading $1'#000+
+  'U','_PPU Loading $1'#000+
   'D_PPU Time: $1'#000+
   'D_PPU File too short'#000+
-  'D_PPU Invalid Header (no PPU ','at the begin)'#000+
+  'D_PPU Invalid Header (no PPU at the begin)'#000+
   'D_PPU Invalid Version $1'#000+
   'D_PPU Flags: $1'#000+
   'D_PPU Crc: $1'#000+
   'T_PPU Source: $1'#000+
   'D_objectfile and assemblerfile are older than ppufile'#000+
-  'D_objectfile is older than assemblerfile'#000+
+  'D_objectfile is old','er than assemblerfile'#000+
   'T_Unitsearch: $1'#000+
   'U_Writing $1'#000+
   'F_Can'#039't Write PPU-File'#000+
-  'F_read','ing PPU-File'#000+
+  'F_reading PPU-File'#000+
   'F_Invalid PPU-File entry: $1'#000+
   'F_PPU Dbx count problem'#000+
   'E_Illegal unit name: $1'#000+
   'F_Too much units'#000+
   'F_Circular unit reference'#000+
-  'F_Can'#039't compile unit $1, no sources available'#000+
+  'F_Can'#039't compile unit $1, n','o sources available'#000+
   'W_Compiling the system unit requires the -Us switch'#000+
-  'F_There w','ere $1 errors compiling module, stopping'#000+
+  'F_There were $1 errors compiling module, stopping'#000+
   '$1 [options] <inputfile> [options]'#000+
   'W_Only one source file supported'#000+
   'W_DEF file can be created only for OS/2'#000+
-  'E_nested response files are not supported'#000+
+  'E_nested r','esponse files are not supported'#000+
   'F_No source file name in command line'#000+
-  'E_Illegal p','arameter: $1'#000+
+  'E_Illegal parameter: $1'#000+
   'H_-? writes help pages'#000+
   'F_Too many config files nested'#000+
   'F_Unable to open file $1'#000+
   'N_Reading further options from $1'#000+
   'W_Target is already set to: $1'#000+
-  'W_Shared libs not supported on DOS platform, reverting to static'#000+
-  'F_too many IF(N)DE','Fs'#000+
+  'W_','Shared libs not supported on DOS platform, reverting to static'#000+
+  'F_too many IF(N)DEFs'#000+
   'F_too many ENDIFs'#000+
   'F_open conditional at the end of the file'#000+
   'W_Debug information generation is not supported by this executable'#000+
-  'H_Try recompiling with -dGDB'#000+
+  'H_Try recompiling with -dGDB'#000,+
   'Free Pascal Compiler version $FPCVER [$FPCDATE] for $FPCTARGET'#000+
-  'Copyright (c) 1993','-98 by Florian Klaempfl'#000+
+  'Copyright (c) 1993-98 by Florian Klaempfl'#000+
   'Free Pascal Compiler version $FPCVER'#000+
   '<lf>'#000+
   'Compiler Date  : $FPCDATE'#000+
   'Compiler Target: $FPCTARGET'#000+
   '<lf>'#000+
-  'This program comes under the GNU General Public Licence'#000+
+  'This program comes under the GNU G','eneral Public Licence'#000+
   'For more information read COPYING.FPC'#000+
   '<lf>'#000+
-  'Report bugs,sugg','estions etc to:'#000+
+  'Report bugs,suggestions etc to:'#000+
   '                [email protected]'#000+
   '**0*_+ switch option on, - off'#000+
   '**1a_the compiler doesn'#039't delete the generated assembler file'#000+
-  '*t1b_use EMS'#000+
+  '*','t1b_use EMS'#000+
   '**1B_build all modules'#000+
   '**1C_code generation options'#000+
-  '3*2CD_create dyna','mic library'#000+
+  '3*2CD_create dynamic library'#000+
   '**2Ch<n>_<n> bytes heap (between 1023 and 67107840)'#000+
   '**2Ci_IO-checking'#000+
   '**2Cn_omit linking stage'#000+
   '**2Co_check overflow of integer operations'#000+
-  '**2Cr_range checking'#000+
+  '**2Cr_ran','ge checking'#000+
   '**2Cs<n>_set stack size to <n>'#000+
   '**2Ct_stack checking'#000+
-  '3*2CS_create stat','ic library'#000+
+  '3*2CS_create static library'#000+
   '3*2Cx_use smartlinking'#000+
   '**1d<x>_defines the symbol <x>'#000+
   '*O1D_generate a DEF file'#000+
   '*O2Dd<x>_set description to <x>'#000+
   '*O2Dw_PM application'#000+
-  '**1e<x>_set path to executable'#000+
+  '**1e<x>_set path',' to executable'#000+
   '**1E_same as -Cn'#000+
   '**1F_set file names and paths'#000+
-  '**2Fe<x>_redirect e','rror output to <x>'#000+
+  '**2Fe<x>_redirect error output to <x>'#000+
   '*L2Fg<x>_same as -Fl'#000+
   '**2Fi<x>_adds <x> to include path'#000+
   '**2Fl<x>_adds <x> to library path'#000+
   '*L2FL<x>_uses <x> as dynamic linker'#000+
-  '**2Fo<x>_adds <x> to object path'#000+
+  '**2Fo<x>_adds <','x> to object path'#000+
   '**2Fr<x>_load error message file <x>'#000+
-  '**2Fu<x>_adds <x> to unit ','path'#000+
+  '**2Fu<x>_adds <x> to unit path'#000+
   '*g1g_generate debugger information'#000+
   '*g2gg_use gsym'#000+
   '*g2gd_use dbx'#000+
   '**1i_information'#000+
   '**1I<x>_adds <x> to include path'#000+
   '**1k<x>_Pass <x> to the linker'#000+
-  '**1l_write logo'#000+
+  '**1l_writ','e logo'#000+
   '**1n_don'#039't read the default config file'#000+
-  '**1o<x>_change the name of the exe','cutable produced to <x>'#000+
+  '**1o<x>_change the name of the executable produced to <x>'#000+
   '**1pg_generate profile code for gprof'#000+
   '*L1P_use pipes instead of creating temporary assembler files'#000+
   '**1S_syntax options'#000+
-  '**2S2_switch some Delphi 2 extensions on'#000+
+  '**2S2_switch som','e Delphi 2 extensions on'#000+
   '**2Sc_supports operators like C (*=,+=,/= and -=)'#000+
-  '**2Sd_','compiler disposes asm lists (uses less memory but slower)'#000+
+  '**2Sd_compiler disposes asm lists (uses less memory but slower)'#000+
   '**2Se_compiler stops after the first error'#000+
   '**2Sg_allow LABEL and GOTO'#000+
-  '**2Si_support C++ stlyed INLINE'#000+
+  '**2Si_support C++ stlyed INLINE',#000+
   '**2Sm_support macros like C (global)'#000+
   '**2So_tries to be TP/BP 7.0 compatible'#000+
-  '**2S','p_tries to be gpc compatible'#000+
+  '**2Sp_tries to be gpc compatible'#000+
   '**2Ss_constructor name must be init (destructor must be done)'#000+
   '**2St_allow static keyword in objects'#000+
-  '**2Sv_allow variable directives (cvar,external,public,export)'#000+
-  '**1s_don'#039't call assembler and linker (only with -','a)'#000+
+  '**2Sv_allow variable directive','s (cvar,external,public,export)'#000+
+  '**1s_don'#039't call assembler and linker (only with -a)'#000+
   '**1T<x>_Target operating system'#000+
   '3*2TGO32V1_version 1 of DJ Delorie DOS extender'#000+
   '3*2TGO32V2_version 2 of DJ Delorie DOS extender'#000+
   '3*2TLINUX_Linux'#000+
-  '3*2TOS2_OS/2 2.x'#000+
+  '3*2TOS2_OS/2',' 2.x'#000+
   '3*2TWin32_Windows 32 Bit'#000+
   '6*2TAMIGA_Commodore Amiga'#000+
-  '6*2TATARI_Atari ST/STe/TT',#000+
+  '6*2TATARI_Atari ST/STe/TT'#000+
   '6*2TMACOS_Macintosh m68k'#000+
   '6*2TLINUX_Linux-68k'#000+
   '**1u<x>_undefines the symbol <x>'#000+
   '**1U_unit options'#000+
   '**2Un_don'#039't check the unit name'#000+
   '**2Up<x>_same as -Fu<x>'#000+
-  '**2Us_compile a system unit'#000+
-  '**1v<x>_Be verbose. <x> is a combination of the following l','etters :'#000+
+  '**2Us_','compile a system unit'#000+
+  '**1v<x>_Be verbose. <x> is a combination of the following letters :'#000+
   '**2*_e : Show errors (default)       d : Show debug info'#000+
   '**2*_w : Show warnings               u : Show used files'#000+
-  '**2*_n : Show notes                  t : Show tried files'#000+
-  '**2*_h : Show hints                  m : Show defined macro','s'#000+
+  '**2*_n : Show notes                 ',' t : Show tried files'#000+
+  '**2*_h : Show hints                  m : Show defined macros'#000+
   '**2*_i : Show general info           p : Show compiled procedures'#000+
   '**2*_l : Show linenumbers            c : Show conditionals'#000+
-  '**2*_a : Show everything             0 : Show nothing (except errors)'#000+
+  '**2*_a : Show everything        ','     0 : Show nothing (except errors'+
+  ')'#000+
   '**1X_executable options'#000+
-  '*L2Xc_link with the',' c library'#000+
+  '*L2Xc_link with the c library'#000+
   '**2XD_link with dynamic libraries (defines FPC_LINK_DYNAMIC)'#000+
   '**2Xs_strip all symbols from executable'#000+
-  '**2XS_link with static libraries (defines FPC_LINK_STATIC)'#000+
+  '**2XS_link with static libraries (defines FPC_L','INK_STATIC)'#000+
   '**0*_Processor specific options:'#000+
   '3*1A_output format'#000+
-  '3*2Ao_coff file u','sing GNU AS'#000+
+  '3*2Ao_coff file using GNU AS'#000+
   '3*2Anasmcoff_coff file using Nasm'#000+
   '3*2Anasmelf_elf32 (linux) file using Nasm'#000+
   '3*2Anasmobj_obj file using Nasm'#000+
   '3*2Amasm_obj using Masm (Mircosoft)'#000+
-  '3*2Atasm_obj using Tasm (Borland)'#000+
+  '3*2','Atasm_obj using Tasm (Borland)'#000+
   '3*1R_assembler reading style'#000+
-  '3*2Ratt_read AT&T sty','le assembler'#000+
+  '3*2Ratt_read AT&T style assembler'#000+
   '3*2Rintel_read Intel style assembler'#000+
   '3*2Rdirect_copy assembler text directly to assembler file'#000+
   '3*1O<x>_optimizations'#000+
   '3*2Og_generate smaller code'#000+
-  '3*2OG_generate faster code (default)'#000+
-  '3*2Or_keep certain variables in registers (st','ill BUGGY!!!)'#000+
+  '3','*2OG_generate faster code (default)'#000+
+  '3*2Or_keep certain variables in registers (still BUGGY!!!)'#000+
   '3*2Ou_enable uncertain optimizations (see docs)'#000+
   '3*2O1_level 1 optimizations (quick optimizations)'#000+
-  '3*2O2_level 2 optimizations (-O1 + slower optimizations)'#000+
+  '3*2O2_level 2 optimizations (-O1 + slower optim','izations)'#000+
   '3*2O3_level 3 optimizations (same as -O2u)'#000+
   '3*2Op_target processor'#000+
-  '3*3Op','1_set target processor to 386/486'#000+
+  '3*3Op1_set target processor to 386/486'#000+
   '3*3Op2_set target processor to Pentium/PentiumMMX (tm)'#000+
   '3*3Op3_set target processor to PPro/PII/c6x86/K6 (tm)'#000+
-  '6*1A_output format'#000+
+  '6*1A_output form','at'#000+
   '6*2Ao_Unix o-file using GNU AS'#000+
   '6*2Agas_GNU Motorola assembler'#000+
-  '6*2Amit_MIT Synt','ax (old GAS)'#000+
+  '6*2Amit_MIT Syntax (old GAS)'#000+
   '6*2Amot_Standard Motorola assembler'#000+
   '6*1O_optimizations'#000+
   '6*2Oa_turn on the optimizer'#000+
   '6*2Og_generate smaller code'#000+
-  '6*2OG_generate faster code (default)'#000+
+  '6*2OG_generate faster code (default',')'#000+
   '6*2Ox_optimize maximum (still BUGGY!!!)'#000+
-  '6*2O2_set target processor to a MC68020','+'#000+
+  '6*2O2_set target processor to a MC68020+'#000+
   '**1*_'#000+
   '**1?_shows this help'#000+
   '**1h_shows this help without waiting'#000

compiler/parser.pas

@@ -212,6 +212,7 @@ unit parser;
          aktlocalswitches:=initlocalswitches;
          aktmoduleswitches:=initmoduleswitches;
          aktpackrecords:=initpackrecords;
+         aktpackenum:=initpackenum;
          aktoutputformat:=initoutputformat;
          aktoptprocessor:=initoptprocessor;
          aktasmmode:=initasmmode;
@@ -370,7 +371,10 @@ unit parser;
 end.
 {
   $Log$
-  Revision 1.40  1998-09-01 07:54:19  pierre
+  Revision 1.41  1998-09-01 12:53:24  peter
+    + aktpackenum
+
+  Revision 1.40  1998/09/01 07:54:19  pierre
     * UseBrowser a little updated (might still be buggy !!)
     * bug in psub.pas in function specifier removed
     * stdcall allowed in interface and in implementation

compiler/symdef.inc

@@ -533,54 +533,102 @@
       begin
          tdef.init;
          deftype:=enumdef;
-         min:=0;
-         max:=0;
-         savesize:=Sizeof(longint);
+         minval:=0;
+         maxval:=0;
+         calcsavesize;
          has_jumps:=false;
          basedef:=nil;
          first:=nil;
       end;
 
+
     constructor tenumdef.init_subrange(_basedef:penumdef;_min,_max:longint);
       begin
          tdef.init;
          deftype:=enumdef;
-         min:=_min;
-         max:=_max;
+         minval:=_min;
+         maxval:=_max;
          basedef:=_basedef;
-         savesize:=Sizeof(longint);
+         calcsavesize;
          has_jumps:=false;
          first:=nil;
       end;
 
+
     constructor tenumdef.load;
       begin
          tdef.load;
          deftype:=enumdef;
          basedef:=penumdef(readdefref);
-         min:=readlong;
-         max:=readlong;
-         savesize:=Sizeof(longint);
+         minval:=readlong;
+         maxval:=readlong;
+         savesize:=readlong;
          has_jumps:=false;
          first:=Nil;
       end;
 
+
+    procedure tenumdef.calcsavesize;
+      var
+        len : longint;
+      begin
+        len:=max-min;
+        if (aktpackenum=4) or (len>65535) then
+         savesize:=4
+        else
+         if (aktpackenum=2) or (len>255) then
+          savesize:=2
+        else
+         savesize:=1;
+      writeln('enum: ',aktpackenum,' save: ',savesize);
+      end;
+
+
+    procedure tenumdef.setmax(_max:longint);
+      begin
+        maxval:=_max;
+        calcsavesize;
+      end;
+
+
+    procedure tenumdef.setmin(_min:longint);
+      begin
+        minval:=_min;
+        calcsavesize;
+      end;
+
+
+    function tenumdef.min:longint;
+      begin
+        min:=minval;
+      end;
+
+
+    function tenumdef.max:longint;
+      begin
+        max:=maxval;
+      end;
+
+
     procedure tenumdef.deref;
       begin
         resolvedef(pdef(basedef));
       end;
 
+
     destructor tenumdef.done;
       begin
         inherited done;
       end;
 
+
     procedure tenumdef.write;
       begin
          tdef.write;
          writedefref(basedef);
          writelong(min);
          writelong(max);
+         writelong(savesize);
          current_ppu^.writeentry(ibenumdef);
       end;
 
@@ -1480,10 +1528,8 @@
          while assigned(hp) do
            begin
               hp^.deref;
-
               { set owner }
               hp^.owner:=symtable;
-
               hp:=hp^.next;
            end;
          {$ifdef tp}
@@ -2262,14 +2308,14 @@
          name:=stringdup(readstring);
          childof:=pobjectdef(readdefref);
          options:=readlong;
-	 
+        
          oldread_member:=read_member;
          read_member:=true;
          object_options:=true;
          publicsyms:=new(psymtable,loadasstruct(objectsymtable));
          object_options:=false;
          read_member:=oldread_member;
-	 
+        
          publicsyms^.defowner:=@self;
          publicsyms^.datasize:=savesize;
          publicsyms^.name := stringdup(name^);
@@ -2404,7 +2450,7 @@
          writedefref(childof);
          writelong(options);
          current_ppu^.writeentry(ibobjectdef);
-	 
+        
          oldread_member:=read_member;
          read_member:=true;
          object_options:=true;
@@ -2556,7 +2602,7 @@
          { generate the name }
          rttilist^.concat(new(pai_const,init_8bit(length(name^))));
          rttilist^.concat(new(pai_string,init(name^)));
-         
+
          rttilist^.concat(new(pai_const,init_32bit(size)));
          count:=0;
          publicsyms^.foreach(count_field);
@@ -2583,7 +2629,10 @@
 
 {
   $Log$
-  Revision 1.28  1998-09-01 07:54:22  pierre
+  Revision 1.29  1998-09-01 12:53:25  peter
+    + aktpackenum
+
+  Revision 1.28  1998/09/01 07:54:22  pierre
     * UseBrowser a little updated (might still be buggy !!)
     * bug in psub.pas in function specifier removed
     * stdcall allowed in interface and in implementation

compiler/symsym.inc

@@ -1365,9 +1365,9 @@
          definition:=def;
          value:=v;
          if def^.min>v then
-           def^.min:=v;
+           def^.setmin(v);
          if def^.max<v then
-           def^.max:=v;
+           def^.setmax(v);
 {$ifdef GDB}
          order;
 {$endif GDB}
@@ -1484,12 +1484,12 @@
       begin
          resolvedef(definition);
          if assigned(definition) then
-	  begin
+          begin
             if definition^.sym=nil then
              definition^.sym:=@self;
             if definition^.deftype=recorddef then
              precdef(definition)^.symtable^.name:=stringdup('record '+name);
-	  end;   
+          end;
       end;
 
 
@@ -1606,7 +1606,10 @@
 
 {
   $Log$
-  Revision 1.37  1998-09-01 07:54:25  pierre
+  Revision 1.38  1998-09-01 12:53:26  peter
+    + aktpackenum
+
+  Revision 1.37  1998/09/01 07:54:25  pierre
     * UseBrowser a little updated (might still be buggy !!)
     * bug in psub.pas in function specifier removed
     * stdcall allowed in interface and in implementation

compiler/types.pas

@@ -878,7 +878,10 @@ unit types;
 end.
 {
   $Log$
-  Revision 1.21  1998-08-19 00:42:45  peter
+  Revision 1.22  1998-09-01 12:53:28  peter
+    + aktpackenum
+
+  Revision 1.21  1998/08/19 00:42:45  peter
     + subrange types for enums
     + checking for bounds type with ranges
 
@@ -899,26 +902,6 @@ end.
 
   Revision 1.17  1998/08/05 16:00:17  florian
     * some fixes for ansi strings
-    * $log$ to $Log$
-    * $log$ to Revision 1.21  1998-08-19 00:42:45  peter
-    * $log$ to   + subrange types for enums
-    * $log$ to   + checking for bounds type with ranges
-    * $log$ to
-    * $log$ to Revision 1.20  1998/08/18 14:17:14  pierre
-    * $log$ to   * bug about assigning the return value of a function to
-    * $log$ to     a procvar fixed : warning
-    * $log$ to     assigning a proc to a procvar need @ in FPC mode !!
-    * $log$ to   * missing file/line info restored
-    * $log$ to
-    * $log$ to Revision 1.19  1998/08/18 09:24:48  pierre
-    * $log$ to   * small warning position bug fixed
-    * $log$ to   * support_mmx switches splitting was missing
-    * $log$ to   * rhide error and warning output corrected
-    * $log$ to
-    * $log$ to Revision 1.18  1998/08/14 18:18:49  peter
-    * $log$ to   + dynamic set contruction
-    * $log$ to   * smallsets are now working (always longint size)
-    * $log$ to changed
 
   Revision 1.16  1998/07/20 23:35:50  michael
   Const ansistrings are not copied.