* give a verbose fatal error instead of an internalerror when a required

    system unit type is not found

git-svn-id: trunk@5820 -

compiler/msg/errore.msg

@@ -1654,10 +1654,15 @@ cg_e_break_not_allowed=06044_E_BREAK not allowed
 cg_e_continue_not_allowed=06045_E_CONTINUE not allowed
 % You're trying to use \var{continue} outside a loop construction.
 cg_f_unknown_compilerproc=06046_F_Unknown compilerproc "$1". Check if you use the correct run time library.
-% The compiler expects that the runtime library contains some subrountines. If you see this error
-% and you didn't mess with the runtime library, it's very likely that the runtime library
+% The compiler expects that the runtime library contains certain subroutines. If you see this error
+% and you didn't change the runtime library code, it's very likely that the runtime library
 % you're using doesn't match the used compiler. If you changed the runtime library this error means
 % that you removed a subroutine which the compiler needs for internal use.
+cg_f_unknown_system_type=06047_F_Cannot find system type "$1". Check if you use the correct run time library.
+% The compiler expects that the runtime library contains certain type definitions. If you see this error
+% and you didn't change the runtime library code, it's very likely that the runtime library
+% you're using doesn't match the used compiler. If you changed the runtime library this error means
+% that you removed a type which the compiler needs for internal use.
 % \end{description}
 # EndOfTeX
 

compiler/msgidx.inc

@@ -456,6 +456,7 @@ const
   cg_e_break_not_allowed=06044;
   cg_e_continue_not_allowed=06045;
   cg_f_unknown_compilerproc=06046;
+  cg_f_unknown_system_type=06047;
   asmr_d_start_reading=07000;
   asmr_d_finish_reading=07001;
   asmr_e_none_label_contain_at=07002;
@@ -713,9 +714,9 @@ const
   option_info=11024;
   option_help_pages=11025;
 
-  MsgTxtSize = 42325;
+  MsgTxtSize = 42410;
 
   MsgIdxMax : array[1..20] of longint=(
-    24,82,230,79,63,47,106,22,135,60,
+    24,82,230,79,63,48,106,22,135,60,
     41,1,1,1,1,1,1,1,1,1
   );

compiler/msgtxt.inc

@@ -511,275 +511,276 @@ const msgtxt : array[0..000176,1..240] of char=(
   '06045_E_CONTINUE not allowed'#000+
   '06046_F_Unknown compilerproc "$1". Check if you use the correct run ti'+
   'me library.'#000+
+  '06047_F_Cannot find system type "$1". Check if you u','se the correct r'+
+  'un time library.'#000+
   '07000_DL_Starting $1 styled assembler parsing'#000+
-  '07001_','DL_Finished $1 styled assembler parsing'#000+
+  '07001_DL_Finished $1 styled assembler parsing'#000+
   '07002_E_Non-label pattern contains @'#000+
   '07004_E_Error building record offset'#000+
   '07005_E_OFFSET used without identifier'#000+
-  '07006_E_TYPE used without identifier'#000+
-  '07007_E_Cannot use local variable or parameters he','re'#000+
+  '07','006_E_TYPE used without identifier'#000+
+  '07007_E_Cannot use local variable or parameters here'#000+
   '07008_E_need to use OFFSET here'#000+
   '07009_E_need to use $ here'#000+
   '07010_E_Cannot use multiple relocatable symbols'#000+
-  '07011_E_Relocatable symbol can only be added'#000+
+  '07011_E_Relocatable symbol can only be added'#000,
   '07012_E_Invalid constant expression'#000+
   '07013_E_Relocatable symbol is not allowed'#000+
-  '07014_E','_Invalid reference syntax'#000+
+  '07014_E_Invalid reference syntax'#000+
   '07015_E_You can not reach $1 from that code'#000+
   '07016_E_Local symbols/labels aren'#039't allowed as references'#000+
-  '07017_E_Invalid base and index register usage'#000+
+  '07017_E_Invalid base and in','dex register usage'#000+
   '07018_W_Possible error in object field handling'#000+
-  '07019_E_Wrong scal','e factor specified'#000+
+  '07019_E_Wrong scale factor specified'#000+
   '07020_E_Multiple index register usage'#000+
   '07021_E_Invalid operand type'#000+
   '07022_E_Invalid string as opcode operand: $1'#000+
-  '07023_W_@CODE and @DATA not supported'#000+
+  '07023_W_@CODE and @DATA ','not supported'#000+
   '07024_E_Null label references are not allowed'#000+
-  '07025_E_Divide by zero in',' asm evaluator'#000+
+  '07025_E_Divide by zero in asm evaluator'#000+
   '07026_E_Illegal expression'#000+
   '07027_E_escape sequence ignored: $1'#000+
   '07028_E_Invalid symbol reference'#000+
-  '07029_W_Fwait can cause emulation problems with emu387'#000+
+  '07029_W_Fwait can cause emulation problems w','ith emu387'#000+
   '07030_W_$1 without operand translated into $1P'#000+
-  '07031_W_ENTER instruction i','s not supported by Linux kernel'#000+
+  '07031_W_ENTER instruction is not supported by Linux kernel'#000+
   '07032_W_Calling an overload function in assembler'#000+
   '07033_E_Unsupported symbol type for operand'#000+
-  '07034_E_Constant value out of bounds'#000+
+  '07034_E_Constant value out of',' bounds'#000+
   '07035_E_Error converting decimal $1'#000+
   '07036_E_Error converting octal $1'#000+
-  '07037_E','_Error converting binary $1'#000+
+  '07037_E_Error converting binary $1'#000+
   '07038_E_Error converting hexadecimal $1'#000+
   '07039_H_$1 translated to $2'#000+
   '07040_W_$1 is associated to an overloaded function'#000+
-  '07041_E_Cannot use SELF outside a method'#000+
-  '07042_E_Cannot use OLDEBP outside a nested procedure',#000+
+  '07041_E_','Cannot use SELF outside a method'#000+
+  '07042_E_Cannot use OLDEBP outside a nested procedure'#000+
   '07043_W_Procedures can'#039't return any value in asm code'#000+
   '07044_E_SEG not supported'#000+
   '07045_E_Size suffix and destination or source size do not match'#000+
-  '07046_W_Size suffix and destination or source size do not match'#000+
-  '07047_E_Assembler syntax error'#000,
+  '07046_W_Si','ze suffix and destination or source size do not match'#000+
+  '07047_E_Assembler syntax error'#000+
   '07048_E_Invalid combination of opcode and operands'#000+
   '07049_E_Assembler syntax error in operand'#000+
   '07050_E_Assembler syntax error in constant'#000+
-  '07051_E_Invalid String expression'#000+
-  '07052_W_constant with symbol $1 for address which is not on a pointer'#000,
+  '07051_E_Invalid Str','ing expression'#000+
+  '07052_W_constant with symbol $1 for address which is not on a pointer'#000+
   '07053_E_Unrecognized opcode $1'#000+
   '07054_E_Invalid or missing opcode'#000+
   '07055_E_Invalid combination of prefix and opcode: $1'#000+
-  '07056_E_Invalid combination of override and opcode: $1'#000+
+  '07056_E_Invalid combination of overri','de and opcode: $1'#000+
   '07057_E_Too many operands on line'#000+
   '07058_W_NEAR ignored'#000+
-  '07059_W_FAR ','ignored'#000+
+  '07059_W_FAR ignored'#000+
   '07060_E_Duplicate local symbol $1'#000+
   '07061_E_Undefined local symbol $1'#000+
   '07062_E_Unknown label identifier $1'#000+
   '07063_E_Invalid register name'#000+
-  '07064_E_Invalid floating point register name'#000+
+  '07064_E_Inval','id floating point register name'#000+
   '07066_W_Modulo not supported'#000+
-  '07067_E_Invalid floating',' point constant $1'#000+
+  '07067_E_Invalid floating point constant $1'#000+
   '07068_E_Invalid floating point expression'#000+
   '07069_E_Wrong symbol type'#000+
   '07070_E_Cannot index a local var or parameter with a register'#000+
-  '07071_E_Invalid segment override expression'#000+
+  '07071_','E_Invalid segment override expression'#000+
   '07072_W_Identifier $1 supposed external'#000+
-  '07073_E','_Strings not allowed as constants'#000+
+  '07073_E_Strings not allowed as constants'#000+
   '07074_No type of variable specified'#000+
   '07075_E_assembler code not returned to text section'#000+
-  '07076_E_Not a directive or local symbol $1'#000+
+  '07076_E_Not a directive or local ','symbol $1'#000+
   '07077_E_Using a defined name as a local label'#000+
-  '07078_E_Dollar token is used ','without an identifier'#000+
+  '07078_E_Dollar token is used without an identifier'#000+
   '07079_W_32bit constant created for address'#000+
   '07080_N_.align is target specific, use .balign or .p2align'#000+
-  '07081_E_Can'#039't access fields directly for parameters'#000+
+  '07081_E_Can'#039't access fields dir','ectly for parameters'#000+
   '07082_E_Can'#039't access fields of objects/classes directly'#000+
-  '07083_E_','No size specified and unable to determine the size of the op'+
-  'erands'#000+
+  '07083_E_No size specified and unable to determine the size of the oper'+
+  'ands'#000+
   '07084_E_Cannot use RESULT in this function'#000+
-  '07086_W_"$1" without operand translated into "$1 %st,%st(1)"'#000+
+  '07086_W_"$1" without operand translated into ','"$1 %st,%st(1)"'#000+
   '07087_W_"$1 %st(n)" translated into "$1 %st,%st(n)"'#000+
-  '07088_W_"$1 %st(n',')" translated into "$1 %st(n),%st"'#000+
+  '07088_W_"$1 %st(n)" translated into "$1 %st(n),%st"'#000+
   '07089_E_Char < not allowed here'#000+
   '07090_E_Char > not allowed here'#000+
   '07093_W_ALIGN not supported'#000+
-  '07094_E_Inc and Dec cannot be together'#000+
+  '07094_E_Inc and Dec cannot b','e together'#000+
   '07095_E_Invalid reglist for movem'#000+
   '07096_E_Reglist invalid for opcode'#000+
-  '07097','_E_Higher cpu mode required ($1)'#000+
+  '07097_E_Higher cpu mode required ($1)'#000+
   '07098_W_No size specified and unable to determine the size of the oper'+
   'ands, using DWORD as default'#000+
-  '07099_E_Syntax error while trying to parse a shifter operand'#000+
-  '07100_E_Address of packed component is not at a',' byte boundary'#000+
+  '07099_E_Syntax error wh','ile trying to parse a shifter operand'#000+
+  '07100_E_Address of packed component is not at a byte boundary'#000+
   '07101_W_No size specified and unable to determine the size of the oper'+
   'ands, using BYTE as default'#000+
-  '07102_W_Use of +offset(%ebp) for parameters invalid here'#000+
-  '07103_W_Use of +offset(%ebp) is not compatible with regcall convention',
+  '07102_W_Use of +offset(%ebp) for parameter','s invalid here'#000+
+  '07103_W_Use of +offset(%ebp) is not compatible with regcall convention'+
   #000+
   '07104_W_Use of -offset(%ebp) is not recommanded for local variable acc'+
   'ess'#000+
   '07105_W_Use of -offset(%esp), value may be crashed'#000+
-  '08000_F_Too many assembler files'#000+
+  '08000_F_Too many assembler fi','les'#000+
   '08001_F_Selected assembler output not supported'#000+
   '08002_F_Comp not supported'#000+
-  '08003_','F_Direct not support for binary writers'#000+
+  '08003_F_Direct not support for binary writers'#000+
   '08004_E_Allocating of data is only allowed in bss section'#000+
   '08005_F_No binary writer selected'#000+
-  '08006_E_Asm: Opcode $1 not in table'#000+
+  '08006_E_Asm: Opcode $1 ','not in table'#000+
   '08007_E_Asm: $1 invalid combination of opcode and operands'#000+
-  '08008_E_Asm: ','16 Bit references not supported'#000+
+  '08008_E_Asm: 16 Bit references not supported'#000+
   '08009_E_Asm: Invalid effective address'#000+
   '08010_E_Asm: Immediate or reference expected'#000+
-  '08011_E_Asm: $1 value exceeds bounds $2'#000+
+  '08011_E_Asm: $1 value exceeds bounds $2',#000+
   '08012_E_Asm: Short jump is out of range $1'#000+
   '08013_E_Asm: Undefined label $1'#000+
-  '08014_E_A','sm: Comp type not supported for this target'#000+
+  '08014_E_Asm: Comp type not supported for this target'#000+
   '08015_E_Asm: Extended type not supported for this target'#000+
   '08016_E_Asm: Duplicate label $1'#000+
-  '08017_E_Asm: Redefined label $1'#000+
+  '08017_E_Asm: Redefined',' label $1'#000+
   '08018_E_Asm: First defined here'#000+
   '08019_E_Asm: Invalid register $1'#000+
-  '08020_E_As','m: 16 or 32 Bit references not supported'#000+
+  '08020_E_Asm: 16 or 32 Bit references not supported'#000+
   '08021_E_Asm: 64 Bit operands not supported'#000+
   '09000_W_Source operating system redefined'#000+
-  '09001_I_Assembling (pipe) $1'#000+
+  '09001_I_Assembling (pipe) $1'#000,
   '09002_E_Can'#039't create assembler file: $1'#000+
   '09003_E_Can'#039't create object file: $1'#000+
-  '09004_E_','Can'#039't create archive file: $1'#000+
+  '09004_E_Can'#039't create archive file: $1'#000+
   '09005_E_Assembler $1 not found, switching to external assembling'#000+
   '09006_T_Using assembler: $1'#000+
-  '09007_E_Error while assembling exitcode $1'#000+
+  '09007_E_Error while assembling e','xitcode $1'#000+
   '09008_E_Can'#039't call the assembler, error $1 switching to external a'+
-  'ssemblin','g'#000+
+  'ssembling'#000+
   '09009_I_Assembling $1'#000+
   '09010_I_Assembling with smartlinking $1'#000+
   '09011_W_Object $1 not found, Linking may fail !'#000+
-  '09012_W_Library $1 not found, Linking may fail !'#000+
+  '09012_W_Library $1 not found, Linking may f','ail !'#000+
   '09013_E_Error while linking'#000+
-  '09014_E_Can'#039't call the linker, switching to externa','l linking'#000+
+  '09014_E_Can'#039't call the linker, switching to external linking'#000+
   '09015_I_Linking $1'#000+
   '09016_E_Util $1 not found, switching to external linking'#000+
   '09017_T_Using util $1'#000+
   '09018_E_Creation of Executables not supported'#000+
-  '09019_E_Creation of Dynamic/Shared Libraries not supported'#000+
+  '0','9019_E_Creation of Dynamic/Shared Libraries not supported'#000+
   '09020_I_Closing script $1'#000+
-  '0','9021_E_resource compiler not found, switching to external mode'#000+
+  '09021_E_resource compiler not found, switching to external mode'#000+
   '09022_I_Compiling resource $1'#000+
-  '09023_T_unit $1 can'#039't be statically linked, switching to smart lin'+
-  'king'#000+
+  '09023_T_unit $1 can'#039't be statically linked, switching to smart',' l'+
+  'inking'#000+
   '09024_T_unit $1 can'#039't be smart linked, switching to static linking'+
   #000+
-  '09025_T_u','nit $1 can'#039't be shared linked, switching to static link'+
-  'ing'#000+
+  '09025_T_unit $1 can'#039't be shared linked, switching to static linkin'+
+  'g'#000+
   '09026_E_unit $1 can'#039't be smart or static linked'#000+
-  '09027_E_unit $1 can'#039't be shared or static linked'#000+
+  '09027_E_unit $1 can'#039't be shared or static linked',#000+
   '09028_D_Calling resource compiler "$1" with "$2" as command line'#000+
-  '09128_F_Can'#039't post ','process executable $1'#000+
+  '09128_F_Can'#039't post process executable $1'#000+
   '09129_F_Can'#039't open executable $1'#000+
   '09130_X_Size of Code: $1 bytes'#000+
   '09131_X_Size of initialized data: $1 bytes'#000+
-  '09132_X_Size of uninitialized data: $1 bytes'#000+
+  '09132_X_Size of uninitiali','zed data: $1 bytes'#000+
   '09133_X_Stack space reserved: $1 bytes'#000+
-  '09134_X_Stack space committ','ed: $1 bytes'#000+
+  '09134_X_Stack space committed: $1 bytes'#000+
   '10000_T_Unitsearch: $1'#000+
   '10001_T_PPU Loading $1'#000+
   '10002_U_PPU Name: $1'#000+
   '10003_U_PPU Flags: $1'#000+
   '10004_U_PPU Crc: $1'#000+
   '10005_U_PPU Time: $1'#000+
-  '10006_U_PPU File too short'#000+
+  '10006_U_PPU ','File too short'#000+
   '10007_U_PPU Invalid Header (no PPU at the begin)'#000+
-  '10008_U_PPU Invalid V','ersion $1'#000+
+  '10008_U_PPU Invalid Version $1'#000+
   '10009_U_PPU is compiled for another processor'#000+
   '10010_U_PPU is compiled for an other target'#000+
   '10011_U_PPU Source: $1'#000+
   '10012_U_Writing $1'#000+
-  '10013_F_Can'#039't Write PPU-File'#000+
+  '10013_F_Can'#039't',' Write PPU-File'#000+
   '10014_F_Error reading PPU-File'#000+
   '10015_F_unexpected end of PPU-File'#000+
-  '100','16_F_Invalid PPU-File entry: $1'#000+
+  '10016_F_Invalid PPU-File entry: $1'#000+
   '10017_F_PPU Dbx count problem'#000+
   '10018_E_Illegal unit name: $1'#000+
   '10019_F_Too much units'#000+
-  '10020_F_Circular unit reference between $1 and $2'#000+
+  '10020_F_Circular unit reference between ','$1 and $2'#000+
   '10021_F_Can'#039't compile unit $1, no sources available'#000+
-  '10022_F_Can'#039't find unit',' $1'#000+
+  '10022_F_Can'#039't find unit $1'#000+
   '10023_W_Unit $1 was not found but $2 exists'#000+
   '10024_F_Unit $1 searched but $2 found'#000+
   '10025_W_Compiling the system unit requires the -Us switch'#000+
-  '10026_F_There were $1 errors compiling module, stopping'#000+
+  '10026_F_The','re were $1 errors compiling module, stopping'#000+
   '10027_U_Load from $1 ($2) unit $3'#000+
-  '10028_','U_Recompiling $1, checksum changed for $2'#000+
+  '10028_U_Recompiling $1, checksum changed for $2'#000+
   '10029_U_Recompiling $1, source found only'#000+
   '10030_U_Recompiling unit, static lib is older than ppufile'#000+
-  '10031_U_Recompiling unit, shared lib is older than ppufile'#000+
-  '10032_U_Recompiling unit, obj and asm ','are older than ppufile'#000+
+  '10031_U_Reco','mpiling unit, shared lib is older than ppufile'#000+
+  '10032_U_Recompiling unit, obj and asm are older than ppufile'#000+
   '10033_U_Recompiling unit, obj is older than asm'#000+
   '10034_U_Parsing interface of $1'#000+
   '10035_U_Parsing implementation of $1'#000+
-  '10036_U_Second load for unit $1'#000+
+  '10036_U_Second ','load for unit $1'#000+
   '10037_U_PPU Check file $1 time $2'#000+
-  '10040_W_Can'#039't recompile unit $1, b','ut found modifed include files'+
-  #000+
+  '10040_W_Can'#039't recompile unit $1, but found modifed include files'#000+
   '10041_U_File $1 is newer than PPU file $2'#000+
   '10042_U_Using a unit which was not compiled with correct FPU mode'#000+
-  '10043_U_Loading interface units from $1'#000+
+  '10043_U_Loading ','interface units from $1'#000+
   '10044_U_Loading implementation units from $1'#000+
-  '10045_U_Interfac','e CRC changed for unit $1'#000+
+  '10045_U_Interface CRC changed for unit $1'#000+
   '10046_U_Implementation CRC changed for unit $1'#000+
   '10047_U_Finished compiling unit $1'#000+
   '10048_U_Add dependency of $1 to $2'#000+
-  '10049_U_No reload, is caller: $1'#000+
+  '10049_U_No r','eload, is caller: $1'#000+
   '10050_U_No reload, already in second compile: $1'#000+
-  '10051_U_Flag fo','r reload: $1'#000+
+  '10051_U_Flag for reload: $1'#000+
   '10052_U_Forced reloading'#000+
   '10053_U_Previous state of $1: $2'#000+
   '10054_U_Already compiling $1, setting second compile'#000+
   '10055_U_Loading unit $1'#000+
-  '10056_U_Finished loading unit $1'#000+
+  '10056_U','_Finished loading unit $1'#000+
   '10057_U_Registering new unit $1'#000+
-  '10058_U_Re-resolving unit $','1'#000+
+  '10058_U_Re-resolving unit $1'#000+
   '10059_U_Skipping re-resolving unit $1, still loading used units'#000+
   '11000_O_$1 [options] <inputfile> [options]'#000+
   '11001_W_Only one source file supported'#000+
-  '11002_W_DEF file can be created only for OS/2'#000+
-  '11003_E_nested response files are not supporte','d'#000+
+  '11002_W','_DEF file can be created only for OS/2'#000+
+  '11003_E_nested response files are not supported'#000+
   '11004_F_No source file name in command line'#000+
   '11005_N_No option inside $1 config file'#000+
   '11006_E_Illegal parameter: $1'#000+
   '11007_H_-? writes help pages'#000+
-  '11008_F_Too many config files nested'#000+
+  '11008_F_To','o many config files nested'#000+
   '11009_F_Unable to open file $1'#000+
-  '11010_D_Reading further opt','ions from $1'#000+
+  '11010_D_Reading further options from $1'#000+
   '11011_W_Target is already set to: $1'#000+
   '11012_W_Shared libs not supported on DOS platform, reverting to static'+
   #000+
   '11013_F_too many IF(N)DEFs'#000+
-  '11014_F_too many ENDIFs'#000+
+  '11014_F','_too many ENDIFs'#000+
   '11015_F_open conditional at the end of the file'#000+
-  '11016_W_Debug inform','ation generation is not supported by this execut'+
-  'able'#000+
+  '11016_W_Debug information generation is not supported by this executab'+
+  'le'#000+
   '11017_H_Try recompiling with -dGDB'#000+
   '11018_W_You are using the obsolete switch $1'#000+
-  '11019_W_You are using the obsolete switch $1, please use $2'#000+
-  '11020_N_Switching assembler to default source w','riting assembler'#000+
+  '11019_W_You are using ','the obsolete switch $1, please use $2'#000+
+  '11020_N_Switching assembler to default source writing assembler'#000+
   '11021_W_Assembler output selected "$1" is not compatible with "$2"'#000+
   '11022_W_"$1" assembler use forced'#000+
-  '11026_T_Reading options from file $1'#000+
+  '11026_T_Reading options from file $1'#000,
   '11027_T_Reading options from environment $1'#000+
   '11028_D_Handling option "$1"'#000+
-  '11029__*** p','ress enter ***'#000+
+  '11029__*** press enter ***'#000+
   '11030_H_Start of reading config file $1'#000+
   '11031_H_End of reading config file $1'#000+
   '11032_D_interpreting option "$1"'#000+
-  '11036_D_interpreting firstpass option "$1"'#000+
+  '11036_D_interpreting firstpas','s option "$1"'#000+
   '11033_D_interpreting file option "$1"'#000+
-  '11034_D_Reading config file "$1"'#000,
+  '11034_D_Reading config file "$1"'#000+
   '11035_D_found source file name "$1"'#000+
   '11039_E_Unknown code page'#000+
   '11040_F_Config file $1 is a directory'#000+
-  '11023_Free Pascal Compiler version $FPCFULLVERSION [$FPCDATE] for $FPC'+
-  'CPU'#010+
+  '11023_Free Pascal Compiler version $FPCFULLVERSION [$FP','CDATE] for $F'+
+  'PCCPU'#010+
   'Copyright (c) 1993-2006 by Florian Klaempfl'#000+
-  '11024_Free Pascal Comp','iler version $FPCVERSION'#010+
+  '11024_Free Pascal Compiler version $FPCVERSION'#010+
   #010+
   'Compiler Date      : $FPCDATE'#010+
   'Compiler CPU Target: $FPCCPU'#010+
@@ -788,243 +789,243 @@ const msgtxt : array[0..000176,1..240] of char=(
   '  $OSTARGETS'#010+
   #010+
   'Supported CPU instruction sets:'#010+
-  '  $INSTRUCTIONSETS'#010+
+  '  $I','NSTRUCTIONSETS'#010+
   #010+
   'Supported FPU instruction sets:'#010+
   '  $FPUINSTRUCTIONSETS'#010+
   #010+
-  'Supported Opti','mizations:'#010+
+  'Supported Optimizations:'#010+
   '  $OPTIMIZATIONS'#010+
   #010+
   'This program comes under the GNU General Public Licence'#010+
   'For more information read COPYING.FPC'#010+
   #010+
-  'Report bugs,suggestions etc to:'#010+
+  'Report bugs,suggestions etc to:',#010+
   '                 [email protected]'#000+
-  '11025_**0*_put + after a boolean switch option ','to enable it, - to di'+
-  'sable it'#010+
+  '11025_**0*_put + after a boolean switch option to enable it, - to disa'+
+  'ble it'#010+
   '**1a_the compiler doesn'#039't delete the generated assembler file'#010+
   '**2al_list sourcecode lines in assembler file'#010+
-  '**2an_list node info in assembler file'#010+
+  '**2an_list node i','nfo in assembler file'#010+
   '*L2ap_use pipes instead of creating temporary assembler files'#010+
-  '*','*2ar_list register allocation/release info in assembler file'#010+
+  '**2ar_list register allocation/release info in assembler file'#010+
   '**2at_list temp allocation/release info in assembler file'#010+
   '**1A<x>_output format:'#010+
-  '**2Adefault_use default assembler'#010+
+  '**2Adefault_u','se default assembler'#010+
   '3*2Aas_assemble using GNU AS'#010+
-  '3*2Anasmcoff_coff (Go32v2) file usi','ng Nasm'#010+
+  '3*2Anasmcoff_coff (Go32v2) file using Nasm'#010+
   '3*2Anasmelf_elf32 (Linux) file using Nasm'#010+
   '3*2Anasmwin32_Win32 object file using Nasm'#010+
   '3*2Anasmwdosx_Win32/WDOSX object file using Nasm'#010+
-  '3*2Awasm_obj file using Wasm (Watcom)'#010+
+  '3*2Awasm_obj ','file using Wasm (Watcom)'#010+
   '3*2Anasmobj_obj file using Nasm'#010+
-  '3*2Amasm_obj file using Masm',' (Microsoft)'#010+
+  '3*2Amasm_obj file using Masm (Microsoft)'#010+
   '3*2Atasm_obj file using Tasm (Borland)'#010+
   '3*2Aelf_elf32 (Linux) using internal writer'#010+
   '3*2Acoff_coff (Go32v2) using internal writer'#010+
-  '3*2Apecoff_pecoff (Win32) using internal writer'#010+
+  '3*2Apecoff_pec','off (Win32) using internal writer'#010+
   '4*2Aas_assemble using GNU AS'#010+
-  '6*2Aas_Unix o-file usi','ng GNU AS'#010+
+  '6*2Aas_Unix o-file using GNU AS'#010+
   '6*2Agas_GNU Motorola assembler'#010+
   '6*2Amit_MIT Syntax (old GAS)'#010+
   '6*2Amot_Standard Motorola assembler'#010+
   'A*2Aas_assemble using GNU AS'#010+
-  'P*2Aas_assemble using GNU AS'#010+
+  'P*2Aas_assemble usin','g GNU AS'#010+
   'S*2Aas_assemble using GNU AS'#010+
   '**1b_generate browser info'#010+
-  '**2bl_generate local',' symbol info'#010+
+  '**2bl_generate local symbol info'#010+
   '**1B_build all modules'#010+
   '**1C<x>_code generation options:'#010+
   '**2Cc<x>_set default calling convention to <x>'#010+
-  '**2CD_create also dynamic library (not supported)'#010+
+  '**2CD_create also dynamic library (not ','supported)'#010+
   '**2Ce_Compilation with emulated floating point opcodes'#010+
-  '**2Cf<x>_Select fpu',' instruction set to use, see fpc -i for possible '+
-  'values'#010+
+  '**2Cf<x>_Select fpu instruction set to use, see fpc -i for possible va'+
+  'lues'#010+
   '**2Cg_Generate PIC code'#010+
   '**2Ch<n>_<n> bytes heap (between 1023 and 67107840)'#010+
   '**2Ci_IO-checking'#010+
-  '**2Cn_omit linking stage'#010+
+  '**2Cn','_omit linking stage'#010+
   '**2Co_check overflow of integer operations'#010+
-  '**2Cp<x>_select instru','ction set, see fpc -i for possible values'#010+
+  '**2Cp<x>_select instruction set, see fpc -i for possible values'#010+
   '**2CP<x>=<y>_ packing settings'#010+
   '**3CPPACKSET=<y>_ <y> set allocation: 0, 1 or DEFAULT or NORMAL, 2, 4 '+
   'and 8'#010+
-  '**2Cr_range checking'#010+
+  '**2Cr_','range checking'#010+
   '**2CR_verify object method call validity'#010+
-  '**2Cs<n>_set stack size to <n','>'#010+
+  '**2Cs<n>_set stack size to <n>'#010+
   '**2Ct_stack checking'#010+
   '**2CX_create also smartlinked library'#010+
   '**1d<x>_defines the symbol <x>'#010+
   '**1D_generate a DEF file'#010+
   '**2Dd<x>_set description to <x>'#010+
-  '**2Dv<x>_set DLL version to <x>'#010+
+  '**2Dv<','x>_set DLL version to <x>'#010+
   '*O2Dw_PM application'#010+
   '**1e<x>_set path to executable'#010+
-  '**1E_sa','me as -Cn'#010+
+  '**1E_same as -Cn'#010+
   '**1F<x>_set file names and paths:'#010+
   '**2Fa<x>[,y]_for a program load first units <x> and [y] before uses is'+
   ' parsed'#010+
-  '**2Fc<x>_sets input codepage to <x>'#010+
+  '**2Fc<x>_sets input codepage to <','x>'#010+
   '**2FD<x>_sets the directory where to search for compiler utilities'#010+
-  '**2Fe<x>_redire','ct error output to <x>'#010+
+  '**2Fe<x>_redirect error output to <x>'#010+
   '**2FE<x>_set exe/unit output path to <x>'#010+
   '**2Fi<x>_adds <x> to include path'#010+
   '**2Fl<x>_adds <x> to library path'#010+
-  '**2FL<x>_uses <x> as dynamic linker'#010+
+  '**2FL<x>_uses <x> as dy','namic linker'#010+
   '**2Fo<x>_adds <x> to object path'#010+
   '**2Fr<x>_load error message file <x>'#010+
-  '**','2Fu<x>_adds <x> to unit path'#010+
+  '**2Fu<x>_adds <x> to unit path'#010+
   '**2FU<x>_set unit output path to <x>, overrides -FE'#010+
   '*g1g_generate debugger information:'#010+
   '*g2gc_generate checks for pointers'#010+
-  '*g2gd_use dbx'#010+
+  '*g2','gd_use dbx'#010+
   '*g2gg_use gsym'#010+
   '*g2gh_use heap trace unit (for memory leak debugging)'#010+
-  '*g2gl','_use line info unit to show more info for backtraces'#010+
+  '*g2gl_use line info unit to show more info for backtraces'#010+
   '*g2gt_trash local variables (to detect uninitialized uses)'#010+
-  '*g2gv_generates programs traceable with valgrind'#010+
+  '*g2gv_generates programs traceable with val','grind'#010+
   '*g2gw_generate dwarf debugging info'#010+
   '**1i_information'#010+
-  '**2iD_return compiler date',#010+
+  '**2iD_return compiler date'#010+
   '**2iV_return compiler version'#010+
   '**2iW_return full compiler version'#010+
   '**2iSO_return compiler OS'#010+
   '**2iSP_return compiler processor'#010+
   '**2iTO_return target OS'#010+
-  '**2iTP_return target processor'#010+
+  '**2iTP','_return target processor'#010+
   '**1I<x>_adds <x> to include path'#010+
-  '**1k<x>_Pass <x> to the lin','ker'#010+
+  '**1k<x>_Pass <x> to the linker'#010+
   '**1l_write logo'#010+
   '**1M<x>_set language mode to <x>'#010+
   '**2Mfpc_free pascal dialect (default)'#010+
   '**2Mobjfpc_switch some Delphi 2 extensions on'#010+
-  '**2Mdelphi_tries to be Delphi compatible'#010+
+  '**2Mdelphi_tries t','o be Delphi compatible'#010+
   '**2Mtp_tries to be TP/BP 7.0 compatible'#010+
-  '**2Mgpc_tries to be gp','c compatible'#010+
+  '**2Mgpc_tries to be gpc compatible'#010+
   '**2Mmacpas_tries to be compatible to the macintosh pascal dialects'#010+
   '**1n_don'#039't read the default config file'#010+
   '**1N<x>_node tree optimizations'#010+
-  '**2Nu_unroll loops'#010+
+  '**2','Nu_unroll loops'#010+
   '**1o<x>_change the name of the executable produced to <x>'#010+
-  '**1O<x>_opt','imizations:'#010+
+  '**1O<x>_optimizations:'#010+
   '**2O-_disable optimizations'#010+
   '**2O1_level 1 optimizations (quick and debugger friendly)'#010+
   '**2O2_level 2 optimizations (-O1 + quick optimizations)'#010+
-  '**2O3_level 3 optimizations (-O2 + slow optimizations)'#010+
+  '*','*2O3_level 3 optimizations (-O2 + slow optimizations)'#010+
   '**2Oa<x>=<y>_set alignment'#010+
-  '**2O','o[NO]<x>_enable or disable optimizations, see fpc -i for possibl'+
-  'e values'#010+
+  '**2Oo[NO]<x>_enable or disable optimizations, see fpc -i for possible '+
+  'values'#010+
   '**2Op<x>_set target cpu for optimizing, see fpc -i for possible values'+
   #010+
-  '**2Os_generate smaller code'#010+
+  '**2Os_gener','ate smaller code'#010+
   '**1pg_generate profile code for gprof (defines FPC_PROFILE)'#010+
-  '**1R<x>_','assembler reading style:'#010+
+  '**1R<x>_assembler reading style:'#010+
   '**2Rdefault_use default assembler'#010+
   '3*2Ratt_read AT&T style assembler'#010+
   '3*2Rintel_read Intel style assembler'#010+
-  '6*2RMOT_read motorola style assembler'#010+
+  '6*2RMOT_read motorola sty','le assembler'#010+
   '**1S<x>_syntax options:'#010+
   '**2S2_same as -Mobjfpc'#010+
-  '**2Sc_supports operators ','like C (*=,+=,/= and -=)'#010+
+  '**2Sc_supports operators like C (*=,+=,/= and -=)'#010+
   '**2Sa_include assertion code.'#010+
   '**2Sd_same as -Mdelphi'#010+
   '**2Se<x>_error options. <x> is a combination of the following:'#010+
-  '**3*_<n> : compiler stops after the <n> errors (default is 1)'#010+
-  '**3*_w : compiler stops also after wa','rnings'#010+
+  '**3*_<n> : com','piler stops after the <n> errors (default is 1)'#010+
+  '**3*_w : compiler stops also after warnings'#010+
   '**3*_n : compiler stops also after notes'#010+
   '**3*_h : compiler stops also after hints'#010+
   '**2Sg_allow LABEL and GOTO'#010+
   '**2Sh_Use ansistrings'#010+
-  '**2Si_support C++ styled INLINE'#010+
+  '**2Si_support C++',' styled INLINE'#010+
   '**2Sk_load fpcylix unit'#010+
   '**2SI<x>_set interface style to <x>'#010+
-  '**3SIcom_C','OM compatible interface (default)'#010+
+  '**3SIcom_COM compatible interface (default)'#010+
   '**3SIcorba_CORBA compatible interface'#010+
   '**2Sm_support macros like C (global)'#010+
   '**2So_same as -Mtp'#010+
   '**2Sp_same as -Mgpc'#010+
-  '**2Ss_constructor name must be init (destructor must be done)'#010+
-  '**2St_allow static keyword in ','objects'#010+
+  '**2Ss_c','onstructor name must be init (destructor must be done)'#010+
+  '**2St_allow static keyword in objects'#010+
   '**2Sx_enable exception keywords (default in Delphi/ObjFPC modes)'#010+
   '**1s_don'#039't call assembler and linker'#010+
   '**2sh_Generate script to link on host'#010+
-  '**2st_Generate script to link on target'#010+
-  '**2sr_Skip register allocation phase (use with -alr)',#010+
+  '**2st_G','enerate script to link on target'#010+
+  '**2sr_Skip register allocation phase (use with -alr)'#010+
   '**1T<x>_Target operating system:'#010+
   '3*2Temx_OS/2 via EMX (including EMX/RSX extender)'#010+
   '3*2Tfreebsd_FreeBSD'#010+
   '3*2Tgo32v2_Version 2 of DJ Delorie DOS extender'#010+
-  '3*2Tlinux_Linux'#010+
+  '3*2','Tlinux_Linux'#010+
   '3*2Tnetbsd_NetBSD'#010+
   '3*2Tnetware_Novell Netware Module (clib)'#010+
-  '3*2Tnetwlibc_','Novell Netware Module (libc)'#010+
+  '3*2Tnetwlibc_Novell Netware Module (libc)'#010+
   '3*2Topenbsd_OpenBSD'#010+
   '3*2Tos2_OS/2 / eComStation'#010+
   '3*2Tsunos_SunOS/Solaris'#010+
   '3*2Twatcom_Watcom compatible DOS extender'#010+
-  '3*2Twdosx_WDOSX DOS extender'#010+
+  '3*2Twdosx_WDO','SX DOS extender'#010+
   '3*2Twin32_Windows 32 Bit'#010+
   '3*2Twince_Windows CE'#010+
   '4*2Tlinux_Linux'#010+
-  '6*2Tami','ga_Commodore Amiga'#010+
+  '6*2Tamiga_Commodore Amiga'#010+
   '6*2Tatari_Atari ST/STe/TT'#010+
   '6*2Tlinux_Linux/m68k'#010+
   '6*2Tmacos_Macintosh m68k (not supported)'#010+
   '6*2Tpalmos_PalmOS'#010+
   'A*2Tlinux_Linux'#010+
-  'A*2Twince_Windows CE'#010+
+  'A*2Twince_Wind','ows CE'#010+
   'P*2Tamiga_AmigaOS on PowerPC'#010+
   'P*2Tdarwin_Darwin and MacOS X on PowerPC'#010+
-  'P*2Tlinu','x_Linux on PowerPC'#010+
+  'P*2Tlinux_Linux on PowerPC'#010+
   'P*2Tmacos_MacOS (classic) on PowerPC'#010+
   'P*2Tmorphos_MorphOS'#010+
   'S*2Tlinux_Linux'#010+
   '**1u<x>_undefines the symbol <x>'#010+
   '**1U_unit options:'#010+
-  '**2Un_don'#039't check the unit name'#010+
+  '**2Un_don'#039't',' check the unit name'#010+
   '**2Ur_generate release unit files'#010+
   '**2Us_compile a system unit'#010+
-  '**','1v<x>_Be verbose. <x> is a combination of the following letters:'#010+
+  '**1v<x>_Be verbose. <x> is a combination of the following letters:'#010+
   '**2*_e : Show errors (default)       0 : Show nothing (except errors)'#010+
-  '**2*_w : Show warnings               u : Show unit info'#010+
-  '**2*_n : Show notes                  t : Show tri','ed/used files'#010+
+  '**2*_w : Show warnin','gs               u : Show unit info'#010+
+  '**2*_n : Show notes                  t : Show tried/used files'#010+
   '**2*_h : Show hints                  c : Show conditionals'#010+
   '**2*_i : Show general info           d : Show debug info'#010+
-  '**2*_l : Show linenumbers            r : Rhide/GCC compatibility mode'#010+
-  '**2*_a : Show everything             x :',' Executable info (Win32 only'+
-  ')'#010+
+  '**2*_l : Show linenumbers','            r : Rhide/GCC compatibility mod'+
+  'e'#010+
+  '**2*_a : Show everything             x : Executable info (Win32 only)'#010+
   '**2*_b : Write file names messages with full path'#010+
   '**2*_v : write fpcdebug.txt with     p : Write tree.log with parse tre'+
   'e'#010+
-  '**2*_    lots of debugging info'#010+
+  '**2','*_    lots of debugging info'#010+
   '3*1W<x>_Win32-like target options'#010+
-  '3*2WB_Create a relocat','able image'#010+
+  '3*2WB_Create a relocatable image'#010+
   '3*2WB<x>_Set Image base to Hexadecimal <x> value'#010+
   '3*2WC_Specify console type application'#010+
   '3*2WD_Use DEFFILE to export functions of DLL or EXE'#010+
-  '3*2WF_Specify full-screen type application (OS/2 only)'#010+
-  '3*2WG_Specify graphic type applica','tion'#010+
+  '3*2W','F_Specify full-screen type application (OS/2 only)'#010+
+  '3*2WG_Specify graphic type application'#010+
   '3*2WN_Do not generate relocation code (necessary for debugging)'#010+
   '3*2WR_Generate relocation code'#010+
   'P*2WC_Specify console type application (MacOS only)'#010+
-  'P*2WG_Specify graphic type application (MacOS only)'#010+
-  'P*2WT_Specify tool type application ','(MPW tool, MacOS only)'#010+
+  'P*2','WG_Specify graphic type application (MacOS only)'#010+
+  'P*2WT_Specify tool type application (MPW tool, MacOS only)'#010+
   '**1X_executable options:'#010+
   '**2Xc_pass --shared to the linker (Unix only)'#010+
-  '**2Xd_don'#039't use standard library search path (needed for cross com'+
-  'pile)'#010+
+  '**2Xd_don'#039't use standard library search path (needed for cros','s c'+
+  'ompile)'#010+
   '**2Xe_use external linker'#010+
-  '**2XD_try to link units dynamic          (define','s FPC_LINK_DYNAMIC)'#010+
+  '**2XD_try to link units dynamic          (defines FPC_LINK_DYNAMIC)'#010+
   '**2Xi_use internal linker'#010+
   '**2Xm_generate link map'#010+
   '**2XM<x>_set the name of the '#039'main'#039' program routine (default i'+
   's '#039'main'#039')'#010+
-  '**2XP<x>_prepend the binutils names with the prefix <x>'#010+
-  '**2Xr<x>_set library search path to <x> (n','eeded for cross compile)'#010+
+  '**2XP<x>_prep','end the binutils names with the prefix <x>'#010+
+  '**2Xr<x>_set library search path to <x> (needed for cross compile)'#010+
   '**2Xs_strip all symbols from executable'#010+
   '**2XS_try to link units static (default) (defines FPC_LINK_STATIC)'#010+
-  '**2Xt_link with static libraries (-static is passed to linker)'#010+
-  '**2XX_try to link units smart            (def','ines FPC_LINK_SMART)'#010+
+  '**2Xt_link with static ','libraries (-static is passed to linker)'#010+
+  '**2XX_try to link units smart            (defines FPC_LINK_SMART)'#010+
   '**1*_'#010+
   '**1?_shows this help'#010+
   '**1h_shows this help without waiting'#000

compiler/symtable.pas

@@ -1748,7 +1748,7 @@ implementation
         sym:=tsym(systemunit.Find(s));
         if not assigned(sym) or
            (sym.typ<>typesym) then
-          internalerror(200501251);
+          cgmessage1(cg_f_unknown_system_type,s);
         result:=ttypesym(sym);
       end;