freepascal.compiler/compiler/rgobj.pas

{
    Copyright (c) 1998-2012 by the Free Pascal team

    This unit implements the base class for the register allocator

    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 ****************************************************************************
}

{$i fpcdefs.inc}

{ $define DEBUG_REGALLOC}
{ $define DEBUG_SPILLCOALESCE}
{ $define DEBUG_REGISTERLIFE}

{ Allow duplicate allocations, can be used to get the .s file written }
{ $define ALLOWDUPREG}


{$ifdef DEBUG_REGALLOC}
{$define EXTDEBUG}
{$endif DEBUG_REGALLOC}

unit rgobj;

  interface

    uses
      cutils, cpubase,
      aasmtai,aasmdata,aasmsym,aasmcpu,
      cclasses,globtype,cgbase,cgutils;

    type
      {
        The interference bitmap contains of 2 layers:
          layer 1 - 256*256 blocks with pointers to layer 2 blocks
          layer 2 - blocks of 32*256 (32 bytes = 256 bits)
      }
      Tinterferencebitmap2 = array[byte] of set of byte;
      Pinterferencebitmap2 = ^Tinterferencebitmap2;
      Tinterferencebitmap1 = array[byte] of Pinterferencebitmap2;
      pinterferencebitmap1 = ^tinterferencebitmap1;

      Tinterferencebitmap=class
      private
        maxx1,
        maxy1    : byte;
        fbitmap  : pinterferencebitmap1;
        function getbitmap(x,y:tsuperregister):boolean;
        procedure setbitmap(x,y:tsuperregister;b:boolean);
      public
        constructor create;
        destructor destroy;override;
        property bitmap[x,y:tsuperregister]:boolean read getbitmap write setbitmap;default;
      end;

      Tmovelistheader=record
        count,
        maxcount,
        sorted_until : cardinal;
      end;

      Tmovelist=record
        header : Tmovelistheader;
        data : array[tsuperregister] of Tlinkedlistitem;
      end;
      Pmovelist=^Tmovelist;

      {In the register allocator we keep track of move instructions.
       These instructions are moved between five linked lists. There
       is also a linked list per register to keep track about the moves
       it is associated with. Because we need to determine quickly in
       which of the five lists it is we add anu enumeradtion to each
       move instruction.}

      Tmoveset=(ms_coalesced_moves,ms_constrained_moves,ms_frozen_moves,
                ms_worklist_moves,ms_active_moves);
      Tmoveins=class(Tlinkedlistitem)
        moveset:Tmoveset;
        x,y:Tsuperregister;
      end;

      Treginfoflag=(
        ri_coalesced,   { the register is coalesced with other register }
        ri_selected,    { the register is put to selectstack }
        ri_spill_read   { the register contains a value loaded from a spilled register }
      );
      Treginfoflagset=set of Treginfoflag;

      Treginfo=record
        live_start,
        live_end   : Tai;
        subreg   : tsubregister;
        alias    : Tsuperregister;
        { The register allocator assigns each register a colour }
        colour   : Tsuperregister;
        movelist : Pmovelist;
        adjlist  : Psuperregisterworklist;
        degree   : TSuperregister;
        flags    : Treginfoflagset;
        weight   : longint;
{$ifdef llvm}
        def      : pointer;
{$endif llvm}
        count_uses : longint;
        total_interferences : longint;
        real_reg_interferences: word;
      end;
      Preginfo=^TReginfo;

      tspillreginfo = record
        { a single register may appear more than once in an instruction,
          but with different subregister types -> store all subregister types
          that occur, so we can add the necessary constraints for the inline
          register that will have to replace it }
        spillregconstraints : set of TSubRegister;
        orgreg : tsuperregister;
        loadreg,
        storereg: tregister;
        regread, regwritten, mustbespilled: boolean;
      end;
      tspillregsinfo = record
        reginfocount: longint;
        reginfo: array[0..3] of tspillreginfo;
      end;

      Pspill_temp_list=^Tspill_temp_list;
      Tspill_temp_list=array[tsuperregister] of Treference;

      { used to store where a register is spilled and what interferences it has at the point of being spilled }
      tspillinfo = record
        spilllocation : treference;
        spilled : boolean;
        interferences : Tinterferencebitmap;
      end;

      {#------------------------------------------------------------------

      This class implements the default register allocator. It is used by the
      code generator to allocate and free registers which might be valid
      across nodes. It also contains utility routines related to registers.

      Some of the methods in this class should be overridden
      by cpu-specific implementations.

      --------------------------------------------------------------------}
       trgobj=class
        preserved_by_proc : tcpuregisterset;
        used_in_proc : tcpuregisterset;
        { generate SSA code? }
        ssa_safe: boolean;

        constructor create(Aregtype:Tregistertype;
                           Adefaultsub:Tsubregister;
                           const Ausable:array of tsuperregister;
                           Afirst_imaginary:Tsuperregister;
                           Apreserved_by_proc:Tcpuregisterset);
        destructor destroy;override;

        { Allocate a register. An internalerror will be generated if there is
         no more free registers which can be allocated.}
        function getregister(list:TAsmList;subreg:Tsubregister):Tregister;virtual;
        { Get the register specified.}
        procedure getcpuregister(list:TAsmList;r:Tregister);virtual;
        procedure ungetcpuregister(list:TAsmList;r:Tregister);virtual;
        { Get multiple registers specified.}
        procedure alloccpuregisters(list:TAsmList;const r:Tcpuregisterset);virtual;
        { Free multiple registers specified.}
        procedure dealloccpuregisters(list:TAsmList;const r:Tcpuregisterset);virtual;
        function uses_registers:boolean;virtual;
        procedure add_reg_instruction(instr:Tai;r:tregister;aweight:longint);
        procedure add_move_instruction(instr:Taicpu);
        { Do the register allocation.}
        procedure do_register_allocation(list:TAsmList;headertai:tai);virtual;
        { Adds an interference edge.
          don't move this to the protected section, the arm cg requires to access this (FK) }
        procedure add_edge(u,v:Tsuperregister);
        { translates a single given imaginary register to it's real register }
        procedure translate_register(var reg : tregister);
      protected
        maxreginfo,
        maxreginfoinc,
        maxreg            : Tsuperregister;

        regtype           : Tregistertype;
        { default subregister used }
        defaultsub        : tsubregister;
        live_registers:Tsuperregisterworklist;
        spillednodes: tsuperregisterworklist;

        { can be overridden to add cpu specific interferences }
        procedure add_cpu_interferences(p : tai);virtual;
        procedure add_constraints(reg:Tregister);virtual;
        function  getregisterinline(list:TAsmList;const subregconstraints:Tsubregisterset):Tregister;
        procedure ungetregisterinline(list:TAsmList;r:Tregister);
        function  get_spill_subreg(r : tregister) : tsubregister;virtual;
        function  do_spill_replace(list:TAsmList;instr:tai_cpu_abstract_sym;orgreg:tsuperregister;const spilltemp:treference):boolean;virtual;
        { the orgrsupeg parameter is only here for the llvm target, so it can
          discover the def to use for the load }
        procedure do_spill_read(list:TAsmList;pos:tai;const spilltemp:treference;tempreg:tregister;orgsupreg:tsuperregister);virtual;
        procedure do_spill_written(list:TAsmList;pos:tai;const spilltemp:treference;tempreg:tregister;orgsupreg:tsuperregister);virtual;

        function addreginfo(var regs: tspillregsinfo; const r: tsuperregisterset; reg: tregister; operation: topertype): boolean;
        function instr_get_oper_spilling_info(var regs: tspillregsinfo; const r: tsuperregisterset; instr: tai_cpu_abstract_sym; opidx: longint): boolean; virtual;
        procedure substitute_spilled_registers(const regs: tspillregsinfo; instr: tai_cpu_abstract_sym; opidx: longint); virtual;
        procedure try_replace_reg(const regs: tspillregsinfo; var reg: tregister; useloadreg: boolean);
        function instr_spill_register(list:TAsmList;
                                      instr:tai_cpu_abstract_sym;
                                      const r:Tsuperregisterset;
                                      const spilltemplist:Tspill_temp_list): boolean;virtual;
        procedure insert_regalloc_info_all(list:TAsmList);
        procedure determine_spill_registers(list:TAsmList;headertail:tai); virtual;
        procedure get_spill_temp(list:TAsmlist;spill_temps: Pspill_temp_list; supreg: tsuperregister);virtual;
      strict protected
        { Highest register allocated until now.}
        reginfo           : PReginfo;
        usable_registers_cnt : word;
      private
        int_live_range_direction: TRADirection;
        { First imaginary register.}
        first_imaginary   : Tsuperregister;
        usable_registers  : array[0..maxcpuregister] of tsuperregister;
        usable_register_set : tcpuregisterset;
        ibitmap           : Tinterferencebitmap;
        simplifyworklist,
        freezeworklist,
        spillworklist,
        coalescednodes,
        selectstack       : tsuperregisterworklist;
        worklist_moves,
        active_moves,
        frozen_moves,
        coalesced_moves,
        constrained_moves,
        { in this list we collect all moveins which should be disposed after register allocation finishes,
          we still need the moves for spill coalesce for the whole register allocation process, so they cannot be
          released as soon as they are frozen or whatever }
        move_garbage : Tlinkedlist;
        extended_backwards,
        backwards_was_first : tbitset;
        has_usedmarks: boolean;
        has_directalloc: boolean;

        spillinfo : array of tspillinfo;

        { Disposes of the reginfo array.}
        procedure dispose_reginfo;
        { Prepare the register colouring.}
        procedure prepare_colouring;
        { Clean up after register colouring.}
        procedure epilogue_colouring;
        { Colour the registers; that is do the register allocation.}
        procedure colour_registers;
        procedure insert_regalloc_info(list:TAsmList;u:tsuperregister);
        procedure generate_interference_graph(list:TAsmList;headertai:tai);
        { sort spilled nodes by increasing number of interferences }
        procedure sort_spillednodes;
        { translates the registers in the given assembler list }
        procedure translate_registers(list:TAsmList);
        function  spill_registers(list:TAsmList;headertai:tai):boolean;virtual;
        function  getnewreg(subreg:tsubregister):tsuperregister;
        procedure add_edges_used(u:Tsuperregister);
        procedure add_to_movelist(u:Tsuperregister;data:Tlinkedlistitem);
        function move_related(n:Tsuperregister):boolean;
        procedure make_work_list;
        procedure sort_simplify_worklist;
        procedure enable_moves(n:Tsuperregister);
        procedure decrement_degree(m:Tsuperregister);
        procedure simplify;
        procedure add_worklist(u:Tsuperregister);
        function adjacent_ok(u,v:Tsuperregister):boolean;
        function conservative(u,v:Tsuperregister):boolean;
        procedure coalesce;
        procedure freeze_moves(u:Tsuperregister);
        procedure freeze;
        procedure select_spill;
        procedure assign_colours;
        procedure clear_interferences(u:Tsuperregister);
        procedure set_live_range_direction(dir: TRADirection);
        procedure set_live_start(reg : tsuperregister;t : tai);
        function get_live_start(reg : tsuperregister) : tai;
        procedure set_live_end(reg : tsuperregister;t : tai);
        function get_live_end(reg : tsuperregister) : tai;
{$ifdef DEBUG_SPILLCOALESCE}
        procedure write_spill_stats;
{$endif DEBUG_SPILLCOALESCE}
       public
{$ifdef EXTDEBUG}
        procedure writegraph(loopidx:longint);
{$endif EXTDEBUG}
        procedure combine(u,v:Tsuperregister);
        { set v as an alias for u }
        procedure set_alias(u,v:Tsuperregister);
        function  get_alias(n:Tsuperregister):Tsuperregister;
        property live_range_direction: TRADirection read int_live_range_direction write set_live_range_direction;
        property live_start[reg : tsuperregister]: tai read get_live_start write set_live_start;
        property live_end[reg : tsuperregister]: tai read get_live_end write set_live_end;
      end;

    const
      first_reg = 0;
      last_reg = high(tsuperregister)-1;
      maxspillingcounter = 20;


  implementation

    uses
      sysutils,
      globals,
      verbose,tgobj,procinfo,cgobj;

    procedure sort_movelist(ml:Pmovelist);

    {Ok, sorting pointers is silly, but it does the job to make Trgobj.combine
     faster.}

    var h,i,p:longword;
        t:Tlinkedlistitem;

    begin
      with ml^ do
        begin
          if header.count<2 then
            exit;
          p:=1;
          while 2*cardinal(p)<header.count do
            p:=2*p;
          while p<>0 do
            begin
              for h:=p to header.count-1 do
                begin
                  i:=h;
                  t:=data[i];
                  repeat
                    if ptruint(data[i-p])<=ptruint(t) then
                      break;
                    data[i]:=data[i-p];
                    dec(i,p);
                  until i<p;
                  data[i]:=t;
                end;
              p:=p shr 1;
            end;
          header.sorted_until:=header.count-1;
        end;
    end;

{******************************************************************************
                              tinterferencebitmap
******************************************************************************}

    constructor tinterferencebitmap.create;
      begin
        inherited create;
        maxx1:=1;
        fbitmap:=AllocMem(sizeof(tinterferencebitmap1)*2);
      end;


    destructor tinterferencebitmap.destroy;

    var i,j:byte;

    begin
      for i:=0 to maxx1 do
        for j:=0 to maxy1 do
          if assigned(fbitmap[i,j]) then
            dispose(fbitmap[i,j]);
      freemem(fbitmap);
    end;


    function tinterferencebitmap.getbitmap(x,y:tsuperregister):boolean;
      var
        page : pinterferencebitmap2;
      begin
        result:=false;
        if (x shr 8>maxx1) then
          exit;
        page:=fbitmap[x shr 8,y shr 8];
        result:=assigned(page) and
          ((x and $ff) in page^[y and $ff]);
      end;


    procedure tinterferencebitmap.setbitmap(x,y:tsuperregister;b:boolean);
      var
        x1,y1 : byte;
      begin
        x1:=x shr 8;
        y1:=y shr 8;
        if x1>maxx1 then
          begin
            reallocmem(fbitmap,sizeof(tinterferencebitmap1)*(x1+1));
            fillchar(fbitmap[maxx1+1],sizeof(tinterferencebitmap1)*(x1-maxx1),0);
            maxx1:=x1;
          end;
        if not assigned(fbitmap[x1,y1]) then
          begin
            if y1>maxy1 then
              maxy1:=y1;
            new(fbitmap[x1,y1]);
            fillchar(fbitmap[x1,y1]^,sizeof(tinterferencebitmap2),0);
          end;
        if b then
          include(fbitmap[x1,y1]^[y and $ff],(x and $ff))
        else
          exclude(fbitmap[x1,y1]^[y and $ff],(x and $ff));
      end;


{******************************************************************************
                                trgobj
******************************************************************************}

    constructor trgobj.create(Aregtype:Tregistertype;
                              Adefaultsub:Tsubregister;
                              const Ausable:array of tsuperregister;
                              Afirst_imaginary:Tsuperregister;
                              Apreserved_by_proc:Tcpuregisterset);
       var
         i : cardinal;
       begin
         { empty super register sets can cause very strange problems }
         if high(Ausable)=-1 then
           internalerror(200210181);
         live_range_direction:=rad_forward;
         first_imaginary:=Afirst_imaginary;
         maxreg:=Afirst_imaginary;
         regtype:=Aregtype;
         defaultsub:=Adefaultsub;
         preserved_by_proc:=Apreserved_by_proc;
         // default values set by newinstance
         // used_in_proc:=[];
         // ssa_safe:=false;
         live_registers.init;
         { Get reginfo for CPU registers }
         maxreginfo:=first_imaginary;
         maxreginfoinc:=16;
         worklist_moves:=Tlinkedlist.create;
         move_garbage:=TLinkedList.Create;
         reginfo:=allocmem(first_imaginary*sizeof(treginfo));
         for i:=0 to first_imaginary-1 do
           begin
             reginfo[i].degree:=high(tsuperregister);
             reginfo[i].alias:=RS_INVALID;
           end;
         { Usable registers }
         // default value set by constructor
         // fillchar(usable_registers,sizeof(usable_registers),0);
         for i:=low(Ausable) to high(Ausable) do
           begin
             usable_registers[i]:=Ausable[i];
             include(usable_register_set,Ausable[i]);
           end;
         usable_registers_cnt:=high(Ausable)+1;
         { Initialize Worklists }
         spillednodes.init;
         simplifyworklist.init;
         freezeworklist.init;
         spillworklist.init;
         coalescednodes.init;
         selectstack.init;
      end;


    destructor trgobj.destroy;
      begin
        spillednodes.done;
        simplifyworklist.done;
        freezeworklist.done;
        spillworklist.done;
        coalescednodes.done;
        selectstack.done;
        live_registers.done;

        move_garbage.free;
        worklist_moves.free;

        dispose_reginfo;
        extended_backwards.free;
        backwards_was_first.free;
      end;


    procedure Trgobj.dispose_reginfo;
      var
        i : cardinal;
      begin
        if reginfo<>nil then
          begin
            for i:=0 to maxreg-1 do
              with reginfo[i] do
                begin
                  if adjlist<>nil then
                    dispose(adjlist,done);
                  if movelist<>nil then
                    dispose(movelist);
                end;
            freemem(reginfo);
            reginfo:=nil;
          end;
      end;


    function trgobj.getnewreg(subreg:tsubregister):tsuperregister;
      var
        oldmaxreginfo : tsuperregister;
      begin
        result:=maxreg;
        inc(maxreg);
        if maxreg>=last_reg then
          Message(parser_f_too_complex_proc);
        if maxreg>=maxreginfo then
          begin
            oldmaxreginfo:=maxreginfo;
            { Prevent overflow }
            if maxreginfoinc>last_reg-maxreginfo then
              maxreginfo:=last_reg
            else
              begin
                inc(maxreginfo,maxreginfoinc);
                if maxreginfoinc<256 then
                  maxreginfoinc:=maxreginfoinc*2;
              end;
            reallocmem(reginfo,maxreginfo*sizeof(treginfo));
            { Do we really need it to clear it ? At least for 1.0.x (PFV) }
            fillchar(reginfo[oldmaxreginfo],(maxreginfo-oldmaxreginfo)*sizeof(treginfo),0);
          end;
        reginfo[result].subreg:=subreg;
      end;


    function trgobj.getregister(list:TAsmList;subreg:Tsubregister):Tregister;
      begin
        {$ifdef EXTDEBUG}
        if reginfo=nil then
          InternalError(2004020901);
        {$endif EXTDEBUG}
        if defaultsub=R_SUBNONE then
          result:=newreg(regtype,getnewreg(R_SUBNONE),R_SUBNONE)
        else
          result:=newreg(regtype,getnewreg(subreg),subreg);
      end;


    function trgobj.uses_registers:boolean;
      begin
        result:=(maxreg>first_imaginary) or has_usedmarks or has_directalloc;
      end;


    procedure trgobj.ungetcpuregister(list:TAsmList;r:Tregister);
      begin
        if (getsupreg(r)>=first_imaginary) then
          InternalError(2004020901);
        list.concat(Tai_regalloc.dealloc(r,nil));
      end;


    procedure trgobj.getcpuregister(list:TAsmList;r:Tregister);
      var
        supreg:Tsuperregister;
      begin
        supreg:=getsupreg(r);
        if supreg>=first_imaginary then
          internalerror(2003121503);
        include(used_in_proc,supreg);
        has_directalloc:=true;
        list.concat(Tai_regalloc.alloc(r,nil));
      end;


    procedure trgobj.alloccpuregisters(list:TAsmList;const r:Tcpuregisterset);

    var i:cardinal;

    begin
      for i:=0 to first_imaginary-1 do
        if i in r then
          getcpuregister(list,newreg(regtype,i,defaultsub));
    end;


    procedure trgobj.dealloccpuregisters(list:TAsmList;const r:Tcpuregisterset);

    var i:cardinal;

    begin
      for i:=0 to first_imaginary-1 do
        if i in r then
          ungetcpuregister(list,newreg(regtype,i,defaultsub));
    end;

    const
      rtindex : longint = 0;
    procedure trgobj.do_register_allocation(list:TAsmList;headertai:tai);
      var
        spillingcounter:longint;
        endspill:boolean;
        i : Longint;
      begin
        { Insert regalloc info for imaginary registers }
        insert_regalloc_info_all(list);
        ibitmap:=tinterferencebitmap.create;
        generate_interference_graph(list,headertai);
{$ifdef DEBUG_SPILLCOALESCE}
        if maxreg>first_imaginary then
          writeln(current_procinfo.procdef.mangledname, ': register allocation [',regtype,']');
{$endif DEBUG_SPILLCOALESCE}
{$ifdef DEBUG_REGALLOC}
        if maxreg>first_imaginary then
          writegraph(rtindex);
{$endif DEBUG_REGALLOC}
        inc(rtindex);
        { Don't do the real allocation when -sr is passed }
        if (cs_no_regalloc in current_settings.globalswitches) then
          exit;
        { Spill registers which interfere with all usable real registers.
          It is pointless to keep them for further processing. Also it may
          cause endless spilling.

          This can happen when compiling for very constrained CPUs such as
          i8086 where indexed memory access instructions allow only
          few registers as arguments and additionally the calling convention
          provides no general purpose volatile registers.
        }
        for i:=first_imaginary to maxreg-1 do
          if reginfo[i].real_reg_interferences>=usable_registers_cnt then
            spillednodes.add(i);
        if spillednodes.length<>0 then
          begin
            spill_registers(list,headertai);
            spillednodes.clear;
          end;
        {Do register allocation.}
        spillingcounter:=0;
        repeat
          determine_spill_registers(list,headertai);
          endspill:=true;
          if spillednodes.length<>0 then
            begin
              inc(spillingcounter);
              if spillingcounter>maxspillingcounter then
                begin
{$ifdef EXTDEBUG}
                  { Only exit here so the .s file is still generated. Assembling
                    the file will still trigger an error }
                  exit;
{$else}
                  internalerror(200309041);
{$endif}
                end;
              endspill:=not spill_registers(list,headertai);
            end;
        until endspill;
        ibitmap.free;

        translate_registers(list);

{$ifdef DEBUG_SPILLCOALESCE}
        write_spill_stats;
{$endif DEBUG_SPILLCOALESCE}

        { we need the translation table for debugging info and verbose assembler output,
          so not dispose them yet (FK)
        }

        for i:=0 to High(spillinfo) do
          spillinfo[i].interferences.Free;
        spillinfo:=nil;
      end;


    procedure trgobj.add_constraints(reg:Tregister);

    begin
    end;


    procedure trgobj.add_edge(u,v:Tsuperregister);

    {This procedure will add an edge to the virtual interference graph.}

      procedure addadj(u,v:Tsuperregister);

      begin
{$ifdef EXTDEBUG}
        if (u>=maxreginfo) then
          internalerror(2012101901);
{$endif}
        with reginfo[u] do
          begin
            if adjlist=nil then
              new(adjlist,init);
            adjlist^.add(v);
            if (v<first_imaginary) and
               (v in usable_register_set) then
              inc(real_reg_interferences);
          end;
      end;

    begin
      if (u<>v) and not(ibitmap[v,u]) then
        begin
          ibitmap[v,u]:=true;
          ibitmap[u,v]:=true;
          {Precoloured nodes are not stored in the interference graph.}
          if (u>=first_imaginary) then
            addadj(u,v);
          if (v>=first_imaginary) then
            addadj(v,u);
        end;
    end;


    procedure trgobj.add_edges_used(u:Tsuperregister);

    var i:cardinal;

    begin
      with live_registers do
        if length>0 then
          for i:=0 to length-1 do
            add_edge(u,get_alias(buf^[i]));
    end;

{$ifdef EXTDEBUG}
    procedure trgobj.writegraph(loopidx:longint);

    {This procedure writes out the current interference graph in the
    register allocator.}


    var f:text;
        i,j:cardinal;
    begin
      assign(f,current_procinfo.procdef.mangledname+'_igraph'+tostr(loopidx));
      rewrite(f);
      writeln(f,'Interference graph of ',current_procinfo.procdef.fullprocname(true));
      writeln(f,'Register type: ',regtype,', First imaginary register is ',first_imaginary,' ($',hexstr(first_imaginary,2),')');
      writeln(f);
      write(f,'                                   ');
      for i:=0 to maxreg div 16 do
        for j:=0 to 15 do
          write(f,hexstr(i,1));
      writeln(f);
      write(f,'Weight Degree Uses   IntfCnt       ');
      for i:=0 to maxreg div 16 do
        write(f,'0123456789ABCDEF');
      writeln(f);
      for i:=0 to maxreg-1 do
        begin
          write(f,reginfo[i].weight:5,'  ',reginfo[i].degree:5,'  ',reginfo[i].count_uses:5,'  ',reginfo[i].total_interferences:5,'  ');
          if (i<first_imaginary) and
            (findreg_by_number(newreg(regtype,TSuperRegister(i),defaultsub))<>0) then
            write(f,std_regname(newreg(regtype,TSuperRegister(i),defaultsub))+':'+hexstr(i,2):7)
          else
            write(f,'   ',hexstr(i,2):4);
          for j:=0 to maxreg-1 do
            if ibitmap[i,j] then
              write(f,'*')
            else
              write(f,'-');
          writeln(f);
        end;
      close(f);
    end;
{$endif EXTDEBUG}

    procedure trgobj.add_to_movelist(u:Tsuperregister;data:Tlinkedlistitem);
    begin
{$ifdef EXTDEBUG}
        if (u>=maxreginfo) then
          internalerror(2012101902);
{$endif}
      with reginfo[u] do
        begin
          if movelist=nil then
            begin
              { don't use sizeof(tmovelistheader), because that ignores alignment }
              getmem(movelist,ptruint(@movelist^.data)-ptruint(movelist)+16*sizeof(pointer));
              movelist^.header.maxcount:=16;
              movelist^.header.count:=0;
              movelist^.header.sorted_until:=0;
            end
          else
            begin
              if movelist^.header.count>=movelist^.header.maxcount then
                begin
                  movelist^.header.maxcount:=movelist^.header.maxcount*2;
                  { don't use sizeof(tmovelistheader), because that ignores alignment }
                  reallocmem(movelist,ptruint(@movelist^.data)-ptruint(movelist)+movelist^.header.maxcount*sizeof(pointer));
                end;
            end;
          movelist^.data[movelist^.header.count]:=data;
          inc(movelist^.header.count);
        end;
    end;


    procedure trgobj.set_live_range_direction(dir: TRADirection);
      begin
        if (dir in [rad_backwards,rad_backwards_reinit]) then
          begin
            if not assigned(extended_backwards) then
              begin
                { create expects a "size", not a "max bit" parameter -> +1 }
                backwards_was_first:=tbitset.create(maxreg+1);
                extended_backwards:=tbitset.create(maxreg+1);
              end
            else
              begin
                if (dir=rad_backwards_reinit) then
                  extended_backwards.clear;
                backwards_was_first.clear;
              end;
            int_live_range_direction:=rad_backwards;
          end
        else
          int_live_range_direction:=rad_forward;
      end;


    procedure trgobj.set_live_start(reg: tsuperregister; t: tai);
      begin
        reginfo[reg].live_start:=t;
      end;


    function trgobj.get_live_start(reg: tsuperregister): tai;
      begin
        result:=reginfo[reg].live_start;
      end;


    procedure trgobj.set_live_end(reg: tsuperregister; t: tai);
      begin
        reginfo[reg].live_end:=t;
      end;


    function trgobj.get_live_end(reg: tsuperregister): tai;
      begin
        result:=reginfo[reg].live_end;
      end;


    procedure trgobj.add_reg_instruction(instr:Tai;r:tregister;aweight:longint);
      var
        supreg : tsuperregister;
      begin
        supreg:=getsupreg(r);
{$ifdef extdebug}
        if not (cs_no_regalloc in current_settings.globalswitches) and
           (supreg>=maxreginfo) then
          internalerror(200411061);
{$endif extdebug}
        if supreg>=first_imaginary then
          with reginfo[supreg] do
            begin
              { avoid overflow }
              if high(weight)-aweight<weight then
                weight:=high(weight)
              else
                inc(weight,aweight);

              if (live_range_direction=rad_forward) then
                begin
                  if not assigned(live_start) then
                    live_start:=instr;
                  live_end:=instr;
                end
               else
                 begin
                   if not extended_backwards.isset(supreg) then
                     begin
                       extended_backwards.include(supreg);
                       live_start := instr;
                       if not assigned(live_end) then
                         begin
                           backwards_was_first.include(supreg);
                           live_end := instr;
                         end;
                     end
                   else
                     begin
                       if backwards_was_first.isset(supreg) then
                         live_end := instr;
                     end
                 end
            end;
      end;


    procedure trgobj.add_move_instruction(instr:Taicpu);

    {This procedure notifies a certain as a move instruction so the
     register allocator can try to eliminate it.}

    var i:Tmoveins;
        sreg, dreg : Tregister;
        ssupreg,dsupreg:Tsuperregister;

    begin
    {$ifdef extdebug}
      if (instr.oper[O_MOV_SOURCE]^.typ<>top_reg) or
         (instr.oper[O_MOV_DEST]^.typ<>top_reg) then
        internalerror(200311291);
    {$endif}
      sreg:=instr.oper[O_MOV_SOURCE]^.reg;
      dreg:=instr.oper[O_MOV_DEST]^.reg;
      { How should we handle m68k move %d0,%a0? }
      if (getregtype(sreg)<>getregtype(dreg)) then
        exit;
      i:=Tmoveins.create;
      i.moveset:=ms_worklist_moves;
      worklist_moves.insert(i);
      ssupreg:=getsupreg(sreg);
      add_to_movelist(ssupreg,i);
      dsupreg:=getsupreg(dreg);
      { On m68k move can mix address and integer registers,
        this leads to problems ... PM }
      if (ssupreg<>dsupreg) {and (getregtype(sreg)=getregtype(dreg))} then
        {Avoid adding the same move instruction twice to a single register.}
        add_to_movelist(dsupreg,i);
      i.x:=ssupreg;
      i.y:=dsupreg;
    end;

    function trgobj.move_related(n:Tsuperregister):boolean;

    var i:cardinal;

    begin
      move_related:=false;
      with reginfo[n] do
        if movelist<>nil then
          with movelist^ do
            for i:=0 to header.count-1 do
              if Tmoveins(data[i]).moveset in [ms_worklist_moves,ms_active_moves] then
                begin
                  move_related:=true;
                  break;
                end;
    end;

    procedure Trgobj.sort_simplify_worklist;

    {Sorts the simplifyworklist by the number of interferences the
     registers in it cause. This allows simplify to execute in
     constant time.

     Sort the list in the descending order, since items of simplifyworklist
     are retrieved from end to start and then items are added to selectstack.
     The selectstack list is also processed from end to start.

     Such way nodes with most interferences will get their colors first.
     Since degree of nodes in simplifyworklist before sorting is always
     less than the number of usable registers this should not trigger spilling
     and should lead to a better register allocation in some cases.
    }

    var p,h,i,leni,lent:longword;
        t:Tsuperregister;
        adji,adjt:Psuperregisterworklist;

    begin
      with simplifyworklist do
        begin
          if length<2 then
            exit;
          p:=1;
          while 2*p<length do
            p:=2*p;
          while p<>0 do
            begin
              for h:=p to length-1 do
                begin
                  i:=h;
                  t:=buf^[i];
                  adjt:=reginfo[buf^[i]].adjlist;
                  lent:=0;
                  if adjt<>nil then
                    lent:=adjt^.length;
                  repeat
                    adji:=reginfo[buf^[i-p]].adjlist;
                    leni:=0;
                    if adji<>nil then
                      leni:=adji^.length;
                    if leni>=lent then
                      break;
                    buf^[i]:=buf^[i-p];
                    dec(i,p)
                  until i<p;
                  buf^[i]:=t;
                end;
              p:=p shr 1;
            end;
        end;
    end;


    { sort spilled nodes by increasing number of interferences }
    procedure Trgobj.sort_spillednodes;
      var
        p,h,i,leni,lent:longword;
        t:Tsuperregister;
        adji,adjt:Psuperregisterworklist;
      begin
        with spillednodes do
          begin
            if length<2 then
              exit;
            p:=1;
            while 2*p<length do
              p:=2*p;
            while p<>0 do
              begin
                for h:=p to length-1 do
                  begin
                    i:=h;
                    t:=buf^[i];
                    adjt:=reginfo[buf^[i]].adjlist;
                    lent:=0;
                    if adjt<>nil then
                      lent:=adjt^.length;
                    repeat
                      adji:=reginfo[buf^[i-p]].adjlist;
                      leni:=0;
                      if adji<>nil then
                        leni:=adji^.length;
                      if leni<=lent then
                        break;
                      buf^[i]:=buf^[i-p];
                      dec(i,p)
                    until i<p;
                    buf^[i]:=t;
                  end;
                p:=p shr 1;
              end;
          end;
      end;


    procedure trgobj.make_work_list;

    var n:cardinal;

    begin
      {If we have 7 cpu registers, and the degree of a node >= 7, we cannot
       assign it to any of the registers, thus it is significant.}
      for n:=first_imaginary to maxreg-1 do
        with reginfo[n] do
          begin
            if adjlist=nil then
              degree:=0
            else
              degree:=adjlist^.length;
            if degree>=usable_registers_cnt then
              spillworklist.add(n)
            else if move_related(n) then
              freezeworklist.add(n)
            else if not(ri_coalesced in flags) then
              simplifyworklist.add(n);
          end;
      sort_simplify_worklist;
    end;


    procedure trgobj.prepare_colouring;
    begin
      make_work_list;
      active_moves:=Tlinkedlist.create;
      frozen_moves:=Tlinkedlist.create;
      coalesced_moves:=Tlinkedlist.create;
      constrained_moves:=Tlinkedlist.create;
      selectstack.clear;
    end;

    procedure trgobj.enable_moves(n:Tsuperregister);

    var m:Tlinkedlistitem;
        i:cardinal;

    begin
      with reginfo[n] do
        if movelist<>nil then
          for i:=0 to movelist^.header.count-1 do
            begin
              m:=movelist^.data[i];
              if Tmoveins(m).moveset in [ms_worklist_moves,ms_active_moves] then
                if Tmoveins(m).moveset=ms_active_moves then
                  begin
                    {Move m from the set active_moves to the set worklist_moves.}
                    active_moves.remove(m);
                    Tmoveins(m).moveset:=ms_worklist_moves;
                    worklist_moves.concat(m);
                  end;
          end;
    end;

    procedure Trgobj.decrement_degree(m:Tsuperregister);

    var adj : Psuperregisterworklist;
        n : tsuperregister;
        d,i : cardinal;

    begin
      with reginfo[m] do
        begin
          d:=degree;
          if d=0 then
            internalerror(200312151);
          dec(degree);
          if d=usable_registers_cnt then
            begin
              {Enable moves for m.}
              enable_moves(m);
              {Enable moves for adjacent.}
              adj:=adjlist;
              if adj<>nil then
                for i:=1 to adj^.length do
                  begin
                    n:=adj^.buf^[i-1];
                    if reginfo[n].flags*[ri_selected,ri_coalesced]<>[] then
                      enable_moves(n);
                  end;
              {Remove the node from the spillworklist.}
              if not spillworklist.delete(m) then
                internalerror(200310145);

              if move_related(m) then
                freezeworklist.add(m)
              else
                simplifyworklist.add(m);
            end;
        end;
    end;

    procedure trgobj.simplify;

    var adj : Psuperregisterworklist;
        m,n : Tsuperregister;
        i : cardinal;
    begin
      {We take the element with the least interferences out of the
       simplifyworklist. Since the simplifyworklist is now sorted, we
       no longer need to search, but we can simply take the first element.}
      m:=simplifyworklist.get;

      {Push it on the selectstack.}
      selectstack.add(m);
      with reginfo[m] do
        begin
          include(flags,ri_selected);
          adj:=adjlist;
        end;
      if adj<>nil then
        for i:=1 to adj^.length do
          begin
            n:=adj^.buf^[i-1];
            if (n>=first_imaginary) and
               (reginfo[n].flags*[ri_selected,ri_coalesced]=[]) then
              decrement_degree(n);
          end;
    end;

    function trgobj.get_alias(n:Tsuperregister):Tsuperregister;

    begin
      while ri_coalesced in reginfo[n].flags do
        n:=reginfo[n].alias;
      get_alias:=n;
    end;

    procedure trgobj.add_worklist(u:Tsuperregister);
      begin
        if (u>=first_imaginary) and
           (not move_related(u)) and
           (reginfo[u].degree<usable_registers_cnt) then
          begin
            if not freezeworklist.delete(u) then
              internalerror(200308161); {must be found}
            simplifyworklist.add(u);
          end;
      end;


    function trgobj.adjacent_ok(u,v:Tsuperregister):boolean;

    {Check wether u and v should be coalesced. u is precoloured.}

      function ok(t,r:Tsuperregister):boolean;

      begin
        ok:=(t<first_imaginary) or
            // disabled for now, see issue #22405
            // ((r<first_imaginary) and (r in usable_register_set)) or
            (reginfo[t].degree<usable_registers_cnt) or
            ibitmap[r,t];
      end;

    var adj : Psuperregisterworklist;
        i : cardinal;
        n : tsuperregister;

    begin
      with reginfo[v] do
        begin
          adjacent_ok:=true;
          adj:=adjlist;
          if adj<>nil then
            for i:=1 to adj^.length do
              begin
                n:=adj^.buf^[i-1];
                if (flags*[ri_coalesced,ri_selected]=[]) and not ok(n,u) then
                  begin
                    adjacent_ok:=false;
                    break;
                  end;
              end;
        end;
    end;

    function trgobj.conservative(u,v:Tsuperregister):boolean;

    var adj : Psuperregisterworklist;
        done : Tsuperregisterset; {To prevent that we count nodes twice.}
        i,k:cardinal;
        n : tsuperregister;

    begin
      k:=0;
      supregset_reset(done,false,maxreg);
      with reginfo[u] do
        begin
          adj:=adjlist;
          if adj<>nil then
            for i:=1 to adj^.length do
              begin
                n:=adj^.buf^[i-1];
                if reginfo[n].flags*[ri_coalesced,ri_selected]=[] then
                  begin
                    supregset_include(done,n);
                    if reginfo[n].degree>=usable_registers_cnt then
                      inc(k);
                  end;
              end;
        end;
      adj:=reginfo[v].adjlist;
      if adj<>nil then
        for i:=1 to adj^.length do
          begin
            n:=adj^.buf^[i-1];
            if (u<first_imaginary) and
               (n>=first_imaginary) and
               not ibitmap[u,n] and
               (usable_registers_cnt-reginfo[n].real_reg_interferences<=1) then
              begin
                { Do not coalesce if 'u' is the last usable real register available
                  for imaginary register 'n'. }
                conservative:=false;
                exit;
              end;
            if not supregset_in(done,n) and
               (reginfo[n].degree>=usable_registers_cnt) and
               (reginfo[n].flags*[ri_coalesced,ri_selected]=[]) then
              inc(k);
          end;
      conservative:=(k<usable_registers_cnt);
    end;

    procedure trgobj.set_alias(u,v:Tsuperregister);

    begin
      { don't make registers that the register allocator shouldn't touch (such
        as stack and frame pointers) be aliases for other registers, because
        then it can propagate them and even start changing them if the aliased
        register gets changed }
      if ((u<first_imaginary) and
          not(u in usable_register_set)) or
         ((v<first_imaginary) and
          not(v in usable_register_set)) then
        exit;
      include(reginfo[v].flags,ri_coalesced);
      if reginfo[v].alias<>0 then
        internalerror(200712291);
      reginfo[v].alias:=get_alias(u);
      coalescednodes.add(v);
    end;


    procedure trgobj.combine(u,v:Tsuperregister);

    var adj : Psuperregisterworklist;
        i,n,p,q:cardinal;
        t : tsuperregister;
        searched:Tlinkedlistitem;
        found : boolean;

    begin
      if not freezeworklist.delete(v) then
        spillworklist.delete(v);
      coalescednodes.add(v);
      include(reginfo[v].flags,ri_coalesced);
      reginfo[v].alias:=u;

      {Combine both movelists. Since the movelists are sets, only add
       elements that are not already present. The movelists cannot be
       empty by definition; nodes are only coalesced if there is a move
       between them. To prevent quadratic time blowup (movelists of
       especially machine registers can get very large because of moves
       generated during calls) we need to go into disgusting complexity.

       (See webtbs/tw2242 for an example that stresses this.)

       We want to sort the movelist to be able to search logarithmically.
       Unfortunately, sorting the movelist every time before searching
       is counter-productive, since the movelist usually grows with a few
       items at a time. Therefore, we split the movelist into a sorted
       and an unsorted part and search through both. If the unsorted part
       becomes too large, we sort.}
      if assigned(reginfo[u].movelist) then
        begin
          {We have to weigh the cost of sorting the list against searching
           the cost of the unsorted part. I use factor of 8 here; if the
           number of items is less than 8 times the numer of unsorted items,
           we'll sort the list.}
          with reginfo[u].movelist^ do
            if header.count<8*(header.count-header.sorted_until) then
              sort_movelist(reginfo[u].movelist);
          if assigned(reginfo[v].movelist) then
            begin
              for n:=0 to reginfo[v].movelist^.header.count-1 do
                begin
                  {Binary search the sorted part of the list.}
                  searched:=reginfo[v].movelist^.data[n];
                  p:=0;
                  q:=reginfo[u].movelist^.header.sorted_until;
                  i:=0;
                  if q<>0 then
                    repeat
                      i:=(p+q) shr 1;
                      if ptruint(searched)>ptruint(reginfo[u].movelist^.data[i]) then
                        p:=i+1
                      else
                        q:=i;
                    until p=q;
                  with reginfo[u].movelist^ do
                    if searched<>data[i] then
                      begin
                        {Linear search the unsorted part of the list.}
                        found:=false;
                        for i:=header.sorted_until+1 to header.count-1 do
                          if searched=data[i] then
                            begin
                              found:=true;
                              break;
                            end;
                        if not found then
                          add_to_movelist(u,searched);
                      end;
                end;
            end;
        end;

      enable_moves(v);

      adj:=reginfo[v].adjlist;
      if adj<>nil then
        for i:=1 to adj^.length do
          begin
            t:=adj^.buf^[i-1];
            with reginfo[t] do
              if not(ri_coalesced in flags) then
                begin
                  {t has a connection to v. Since we are adding v to u, we
                   need to connect t to u. However, beware if t was already
                   connected to u...}
                  if (ibitmap[t,u]) and not (ri_selected in flags) then
                    {... because in that case, we are actually removing an edge
                     and the degree of t decreases.}
                    decrement_degree(t)
                  else
                    begin
                      add_edge(t,u);
                      {We have added an edge to t and u. So their degree increases.
                       However, v is added to u. That means its neighbours will
                       no longer point to v, but to u instead. Therefore, only the
                       degree of u increases.}
                      if (u>=first_imaginary) and not (ri_selected in flags) then
                        inc(reginfo[u].degree);
                    end;
                end;
          end;
      if (reginfo[u].degree>=usable_registers_cnt) and freezeworklist.delete(u) then
        spillworklist.add(u);
    end;


    procedure trgobj.coalesce;

    var m:Tmoveins;
        x,y,u,v:cardinal;

    begin
      m:=Tmoveins(worklist_moves.getfirst);
      x:=get_alias(m.x);
      y:=get_alias(m.y);
      if (y<first_imaginary) then
        begin
          u:=y;
          v:=x;
        end
      else
        begin
          u:=x;
          v:=y;
        end;
      if (u=v) then
        begin
          m.moveset:=ms_coalesced_moves;  {Already coalesced.}
          coalesced_moves.insert(m);
          add_worklist(u);
        end
      {Do u and v interfere? In that case the move is constrained. Two
       precoloured nodes interfere allways. If v is precoloured, by the above
       code u is precoloured, thus interference...}
      else if (v<first_imaginary) or ibitmap[u,v] then
        begin
          m.moveset:=ms_constrained_moves;  {Cannot coalesce yet...}
          constrained_moves.insert(m);
          add_worklist(u);
          add_worklist(v);
        end
      {Next test: is it possible and a good idea to coalesce?? Note: don't
       coalesce registers that should not be touched by the register allocator,
       such as stack/framepointers, because otherwise they can be changed }
      else if (((u<first_imaginary) and adjacent_ok(u,v)) or
               conservative(u,v)) and
              ((u>first_imaginary) or
               (u in usable_register_set)) and
              ((v>first_imaginary) or
               (v in usable_register_set)) then
        begin
          m.moveset:=ms_coalesced_moves;  {Move coalesced!}
          coalesced_moves.insert(m);
          combine(u,v);
          add_worklist(u);
        end
      else
        begin
          m.moveset:=ms_active_moves;
          active_moves.insert(m);
        end;
    end;

    procedure trgobj.freeze_moves(u:Tsuperregister);

    var i:cardinal;
        m:Tlinkedlistitem;
        v,x,y:Tsuperregister;

    begin
      if reginfo[u].movelist<>nil then
        for i:=0 to reginfo[u].movelist^.header.count-1 do
          begin
            m:=reginfo[u].movelist^.data[i];
            if Tmoveins(m).moveset in [ms_worklist_moves,ms_active_moves] then
              begin
                x:=Tmoveins(m).x;
                y:=Tmoveins(m).y;
                if get_alias(y)=get_alias(u) then
                  v:=get_alias(x)
                else
                  v:=get_alias(y);
                {Move m from active_moves/worklist_moves to frozen_moves.}
                if Tmoveins(m).moveset=ms_active_moves then
                  active_moves.remove(m)
                else
                  worklist_moves.remove(m);
                Tmoveins(m).moveset:=ms_frozen_moves;
                frozen_moves.insert(m);

                if (v>=first_imaginary) and not(move_related(v)) and
                   (reginfo[v].degree<usable_registers_cnt) then
                  begin
                    freezeworklist.delete(v);
                    simplifyworklist.add(v);
                  end;
              end;
          end;
    end;

    procedure trgobj.freeze;

    var n:Tsuperregister;

    begin
      { We need to take a random element out of the freezeworklist. We take
        the last element. Dirty code! }
      n:=freezeworklist.get;
      {Add it to the simplifyworklist.}
      simplifyworklist.add(n);
      freeze_moves(n);
    end;

{ The spilling approach selected by SPILLING_NEW does not work well for AVR as it eploits apparently the problem of the current
  reg. allocator with AVR. The current reg. allocator is not aware of the fact that r1-r15 and r16-r31 are not equal on AVR }
{$if defined(AVR)}
{$define SPILLING_OLD}
{$else defined(AVR)}
{ $define SPILLING_NEW}
{$endif defined(AVR)}
{$ifndef SPILLING_NEW}
{$define SPILLING_OLD}
{$endif SPILLING_NEW}
    procedure trgobj.select_spill;
    var
      n : tsuperregister;
      adj : psuperregisterworklist;
      maxlength,minlength,p,i :word;
      minweight: longint;
      {$ifdef SPILLING_NEW}
      dist: Double;
      {$endif}
    begin
{$ifdef SPILLING_NEW}
      { This new approach for selecting the next spill candidate takes care of the weight of a register:
        It spills the register with the lowest weight but only if it is expected that it results in convergence of
        register allocation. Convergence is expected if a register is spilled where the average of the active interferences
        - active interference means that the register is used in an instruction - is lower than
        the degree.

        Example (modify means read and the write):

        modify reg1

        loop:
          modify reg2
          modify reg3
          modify reg4
          modify reg5
          modify reg6
          modify reg7

        modify reg1

        In this example, all register have the same degree. However, spilling reg1 is most benefical as it is used least. Furthermore,
        spilling reg1 is a step toward solving the coloring problem as the registers used during spilling will have a lower degree
        as no register are in use at the location where reg1 is spilled.
      }
      minweight:=high(longint);
      p:=0;
      with spillworklist do
        begin
          { Safe: This procedure is only called if length<>0 }
          for i:=0 to length-1 do
            begin
              adj:=reginfo[buf^[i]].adjlist;
              dist:=adj^.length-reginfo[buf^[i]].total_interferences/reginfo[buf^[i]].count_uses;
              if assigned(adj) and
                (reginfo[buf^[i]].weight<minweight) and
                (dist>=1) and
                (reginfo[buf^[i]].weight>0) then
                begin
                  p:=i;
                  minweight:=reginfo[buf^[i]].weight;
                end;
            end;
          n:=buf^[p];
          deleteidx(p);
        end;
{$endif SPILLING_NEW}
{$ifdef SPILLING_OLD}
      { We must look for the element with the most interferences in the
        spillworklist. This is required because those registers are creating
        the most conflicts and keeping them in a register will not reduce the
        complexity and even can cause the help registers for the spilling code
        to get too much conflicts with the result that the spilling code
        will never converge (PFV)

        We need a special processing for nodes with the ri_spill_read flag set. 
        These nodes contain a value loaded from a previously spilled node. 
        We need to avoid another spilling of ri_spill_read nodes, since it will 
        likely lead to an endless loop and the register allocation will fail.
      }
      maxlength:=0;
      minweight:=high(longint);
      p:=high(p);
      with spillworklist do
        begin
          {Safe: This procedure is only called if length<>0}
          { Search for a candidate to be spilled, ignoring nodes with the ri_spill_read flag set. }
          for i:=0 to length-1 do
            if not(ri_spill_read in reginfo[buf^[i]].flags) then
              begin
                adj:=reginfo[buf^[i]].adjlist;
                if assigned(adj) and
                   (
                    (adj^.length>maxlength) or
                    ((adj^.length=maxlength) and (reginfo[buf^[i]].weight<minweight))
                   ) then
                  begin
                    p:=i;
                    maxlength:=adj^.length;
                    minweight:=reginfo[buf^[i]].weight;
                  end;
              end;

          if p=high(p) then
            begin
              { If no normal nodes found, then only ri_spill_read nodes are present
                in the list. Finding the node with the least interferences and
                the least weight.
                This allows us to put the most restricted ri_spill_read nodes
                to the top of selectstack so they will be the first to get
                a color assigned.
              }
              minlength:=high(maxlength);
              minweight:=high(minweight);
              p:=0;
              for i:=0 to length-1 do
                begin
                  adj:=reginfo[buf^[i]].adjlist;
                  if assigned(adj) and
                     (
                      (adj^.length<minlength) or
                      ((adj^.length=minlength) and (reginfo[buf^[i]].weight<minweight))
                     ) then
                    begin
                      p:=i;
                      minlength:=adj^.length;
                      minweight:=reginfo[buf^[i]].weight;
                    end;
                end;
            end;
          n:=buf^[p];
          deleteidx(p);
        end;
{$endif SPILLING_OLD}
      simplifyworklist.add(n);
      freeze_moves(n);
    end;

    procedure trgobj.assign_colours;

    {Assign_colours assigns the actual colours to the registers.}

    var adj : Psuperregisterworklist;
        i,j,k : cardinal;
        n,a,c : Tsuperregister;
        colourednodes : Tsuperregisterset;
        adj_colours:set of 0..255;
        found : boolean;
        tmpr: tregister;
    begin
      spillednodes.clear;
      {Reset colours}
      for n:=0 to maxreg-1 do
        reginfo[n].colour:=n;
      {Colour the cpu registers...}
      supregset_reset(colourednodes,false,maxreg);
      for n:=0 to first_imaginary-1 do
        supregset_include(colourednodes,n);
      {Now colour the imaginary registers on the select-stack.}
      for i:=selectstack.length downto 1 do
        begin
          n:=selectstack.buf^[i-1];
          {Create a list of colours that we cannot assign to n.}
          adj_colours:=[];
          adj:=reginfo[n].adjlist;
          if adj<>nil then
            for j:=0 to adj^.length-1 do
              begin
                a:=get_alias(adj^.buf^[j]);
                if supregset_in(colourednodes,a) and (reginfo[a].colour<=255) then
                  include(adj_colours,reginfo[a].colour);
              end;
          { FIXME: temp variable r is needed here to avoid Internal error 20060521 }
          {        while compiling the compiler. }
          tmpr:=NR_STACK_POINTER_REG;
          { e.g. AVR does not have a stack pointer register }
{$if defined(RS_STACK_POINTER_REG)}
  {$if (RS_STACK_POINTER_REG<>RS_INVALID)}
          if (regtype=getregtype(tmpr)) then
            include(adj_colours,RS_STACK_POINTER_REG);
  {$ifend}
{$ifend}
          {Assume a spill by default...}
          found:=false;
          {Search for a colour not in this list.}
          for k:=0 to usable_registers_cnt-1 do
            begin
              c:=usable_registers[k];
               if not(c in adj_colours) then
                 begin
                   reginfo[n].colour:=c;
                   found:=true;
                   supregset_include(colourednodes,n);
                   break;
                 end;
            end;
          if not found then
            spillednodes.add(n);
        end;
      {Finally colour the nodes that were coalesced.}
      for i:=1 to coalescednodes.length do
        begin
          n:=coalescednodes.buf^[i-1];
          k:=get_alias(n);
          reginfo[n].colour:=reginfo[k].colour;
        end;
    end;

    procedure trgobj.colour_registers;

    begin
      repeat
        if simplifyworklist.length<>0 then
          simplify
        else if not(worklist_moves.empty) then
          coalesce
        else if freezeworklist.length<>0 then
          freeze
        else if spillworklist.length<>0 then
          select_spill;
      until (simplifyworklist.length=0) and
            worklist_moves.empty and
            (freezeworklist.length=0) and
            (spillworklist.length=0);
      assign_colours;
    end;

    procedure trgobj.epilogue_colouring;
    begin
      { remove all items from the worklists, but do not free them, they are still needed for spill coalesce }

      move_garbage.concatList(worklist_moves);

      move_garbage.concatList(active_moves);
      active_moves.Free;
      active_moves:=nil;

      move_garbage.concatList(frozen_moves);
      frozen_moves.Free;
      frozen_moves:=nil;

      move_garbage.concatList(coalesced_moves);
      coalesced_moves.Free;
      coalesced_moves:=nil;

      move_garbage.concatList(constrained_moves);
      constrained_moves.Free;
      constrained_moves:=nil;
    end;


    procedure trgobj.clear_interferences(u:Tsuperregister);

    {Remove node u from the interference graph and remove all collected
     move instructions it is associated with.}

    var i : word;
        v : Tsuperregister;
        adj,adj2 : Psuperregisterworklist;

    begin
      adj:=reginfo[u].adjlist;
      if adj<>nil then
        begin
          for i:=1 to adj^.length do
            begin
              v:=adj^.buf^[i-1];
              {Remove (u,v) and (v,u) from bitmap.}
              ibitmap[u,v]:=false;
              ibitmap[v,u]:=false;
              {Remove (v,u) from adjacency list.}
              adj2:=reginfo[v].adjlist;
              if adj2<>nil then
                begin
                  adj2^.delete(u);
                  if adj2^.length=0 then
                    begin
                      dispose(adj2,done);
                      reginfo[v].adjlist:=nil;
                    end;
                end;
            end;
          {Remove ( u,* ) from adjacency list.}
          dispose(adj,done);
          reginfo[u].adjlist:=nil;
        end;
    end;


    function trgobj.getregisterinline(list:TAsmList;const subregconstraints:Tsubregisterset):Tregister;
      var
        p : Tsuperregister;
        subreg: tsubregister;
      begin
        for subreg:=high(tsubregister) downto low(tsubregister) do
          if subreg in subregconstraints then
            break;
        p:=getnewreg(subreg);
        live_registers.add(p);
        result:=newreg(regtype,p,subreg);
        add_edges_used(p);
        add_constraints(result);
        { also add constraints for other sizes used for this register }
        if subreg<>low(tsubregister) then
          for subreg:=pred(subreg) downto low(tsubregister) do
            if subreg in subregconstraints then
              add_constraints(newreg(regtype,getsupreg(result),subreg));
      end;


    procedure trgobj.ungetregisterinline(list:TAsmList;r:Tregister);
      var
        supreg:Tsuperregister;
      begin
        supreg:=getsupreg(r);
        live_registers.delete(supreg);
        insert_regalloc_info(list,supreg);
      end;


    procedure trgobj.insert_regalloc_info(list:TAsmList;u:tsuperregister);
      var
        p : tai;
        r : tregister;
        palloc,
        pdealloc : tai_regalloc;
      begin
        { Insert regallocs for all imaginary registers }
        with reginfo[u] do
          begin
            r:=newreg(regtype,u,subreg);
            if assigned(live_start) then
              begin
                { Generate regalloc and bind it to an instruction, this
                  is needed to find all live registers belonging to an
                  instruction during the spilling }
                if live_start.typ=ait_instruction then
                  palloc:=tai_regalloc.alloc(r,live_start)
                else
                  palloc:=tai_regalloc.alloc(r,nil);
                if live_end.typ=ait_instruction then
                  pdealloc:=tai_regalloc.dealloc(r,live_end)
                else
                  pdealloc:=tai_regalloc.dealloc(r,nil);
                { Insert live start allocation before the instruction/reg_a_sync }
                list.insertbefore(palloc,live_start);
                { Insert live end deallocation before reg allocations
                  to reduce conflicts }
                p:=live_end;
                while assigned(p) and
                      assigned(p.previous) and
                      (tai(p.previous).typ=ait_regalloc) and
                      (tai_regalloc(p.previous).ratype=ra_alloc) and
                      (tai_regalloc(p.previous).reg<>r) do
                  p:=tai(p.previous);
                { , but add release after a reg_a_sync }
                if assigned(p) and
                   (p.typ=ait_regalloc) and
                   (tai_regalloc(p).ratype=ra_sync) then
                  p:=tai(p.next);
                if assigned(p) then
                  list.insertbefore(pdealloc,p)
                else
                  list.concat(pdealloc);
              end;
          end;
      end;


    procedure trgobj.insert_regalloc_info_all(list:TAsmList);
      var
        supreg : tsuperregister;
      begin
        { Insert regallocs for all imaginary registers }
        for supreg:=first_imaginary to maxreg-1 do
          insert_regalloc_info(list,supreg);
      end;


    procedure trgobj.determine_spill_registers(list: TAsmList; headertail: tai);
      begin
        prepare_colouring;
        colour_registers;
        epilogue_colouring;
      end;


    procedure trgobj.get_spill_temp(list: TAsmlist; spill_temps: Pspill_temp_list; supreg: tsuperregister);
      var
        size: ptrint;
      begin
        {Get a temp for the spilled register, the size must at least equal a complete register,
         take also care of the fact that subreg can be larger than a single register like doubles
         that occupy 2 registers }
        { only force the whole register in case of integers. Storing a register that contains
          a single precision value as a double can cause conversion errors on e.g. ARM VFP }
        if (regtype=R_INTREGISTER) then
          size:=max(tcgsize2size[reg_cgsize(newreg(regtype,supreg,R_SUBWHOLE))],
                         tcgsize2size[reg_cgsize(newreg(regtype,supreg,reginfo[supreg].subreg))])
        else
          size:=tcgsize2size[reg_cgsize(newreg(regtype,supreg,reginfo[supreg].subreg))];
        tg.gettemp(list,
                   size,size,
                   tt_noreuse,spill_temps^[supreg]);
      end;


    procedure trgobj.add_cpu_interferences(p : tai);
      begin
      end;


    procedure trgobj.generate_interference_graph(list:TAsmList;headertai:tai);

      procedure RecordUse(var r : Treginfo);
        begin
          inc(r.total_interferences,live_registers.length);
          inc(r.count_uses);
        end;

      var
        p : tai;
        i : integer;
        supreg, u: tsuperregister;
{$ifdef arm}
        so: pshifterop;
{$endif arm}
      begin
        { All allocations are available. Now we can generate the
          interference graph. Walk through all instructions, we can
          start with the headertai, because before the header tai is
          only symbols. }
        live_registers.clear;
        p:=headertai;
        while assigned(p) do
          begin
            prefetch(pointer(p.next)^);
            case p.typ of
              ait_instruction:
                with Taicpu(p) do
                  begin
                    current_filepos:=fileinfo;
                    {For speed reasons, get_alias isn't used here, instead,
                     assign_colours will also set the colour of coalesced nodes.
                     If there are registers with colour=0, then the coalescednodes
                     list probably doesn't contain these registers, causing
                     assign_colours not to do this properly.}
                    for i:=0 to ops-1 do
                      with oper[i]^ do
                        case typ of
                          top_reg:
                             if (getregtype(reg)=regtype) then
                               begin
                                 u:=getsupreg(reg);
{$ifdef EXTDEBUG}
                                 if (u>=maxreginfo) then
                                   internalerror(2018111701);
{$endif}
                                 RecordUse(reginfo[u]);
                               end;
                          top_ref:
                            begin
                              if regtype in [R_INTREGISTER,R_ADDRESSREGISTER] then
                                with ref^ do
                                  begin
                                    if (base<>NR_NO) and
                                       (getregtype(base)=regtype) then
                                      begin
                                        u:=getsupreg(base);
{$ifdef EXTDEBUG}
                                        if (u>=maxreginfo) then
                                          internalerror(2018111702);
{$endif}
                                        RecordUse(reginfo[u]);
                                      end;
                                    if (index<>NR_NO) and
                                       (getregtype(index)=regtype) then
                                      begin
                                        u:=getsupreg(index);
{$ifdef EXTDEBUG}
                                        if (u>=maxreginfo) then
                                          internalerror(2018111703);
{$endif}
                                        RecordUse(reginfo[u]);
                                      end;
{$if defined(x86)}
                                    if (segment<>NR_NO) and
                                       (getregtype(segment)=regtype) then
                                      begin
                                        u:=getsupreg(segment);
{$ifdef EXTDEBUG}
                                        if (u>=maxreginfo) then
                                          internalerror(2018111704);
{$endif}
                                        RecordUse(reginfo[u]);
                                      end;
{$endif defined(x86)}
                                  end;
                            end;
{$ifdef arm}
                          Top_shifterop:
                            begin
                              if regtype=R_INTREGISTER then
                                begin
                                  so:=shifterop;
                                  if (so^.rs<>NR_NO) and
                                     (getregtype(so^.rs)=regtype) then
                                    RecordUse(reginfo[getsupreg(so^.rs)]);
                                end;
                            end;
{$endif arm}
                          else
                            ;
                        end;
                  end;
              ait_regalloc:
                with Tai_regalloc(p) do
                  begin
                    if (getregtype(reg)=regtype) then
                      begin
                        supreg:=getsupreg(reg);
                        case ratype of
                          ra_alloc :
                            begin
                              live_registers.add(supreg);
{$ifdef DEBUG_REGISTERLIFE}
                              write(live_registers.length,'  ');
                              for i:=0 to live_registers.length-1 do
                                write(std_regname(newreg(regtype,live_registers.buf^[i],defaultsub)),' ');
                              writeln;
{$endif DEBUG_REGISTERLIFE}
                              add_edges_used(supreg);
                            end;
                          ra_dealloc :
                            begin
                              live_registers.delete(supreg);
{$ifdef DEBUG_REGISTERLIFE}
                              write(live_registers.length,'  ');
                              for i:=0 to live_registers.length-1 do
                                write(std_regname(newreg(regtype,live_registers.buf^[i],defaultsub)),' ');
                              writeln;
{$endif DEBUG_REGISTERLIFE}
                              add_edges_used(supreg);
                            end;
                          ra_markused :
                            if (supreg<first_imaginary) then
                              begin
                                include(used_in_proc,supreg);
                                has_usedmarks:=true;
                              end;
                          else
                            ;
                        end;
                        { constraints needs always to be updated }
                        add_constraints(reg);
                      end;
                  end;
              else
                ;
            end;
            add_cpu_interferences(p);
            p:=Tai(p.next);
          end;

{$ifdef EXTDEBUG}
        if live_registers.length>0 then
          begin
            for i:=0 to live_registers.length-1 do
              begin
                { Only report for imaginary registers }
                if live_registers.buf^[i]>=first_imaginary then
                  Comment(V_Warning,'Register '+std_regname(newreg(regtype,live_registers.buf^[i],defaultsub))+' not released');
              end;
          end;
{$endif}
      end;


    procedure trgobj.translate_register(var reg : tregister);
      begin
        if (getregtype(reg)=regtype) then
          setsupreg(reg,reginfo[getsupreg(reg)].colour)
        else
          internalerror(200602021);
      end;


    procedure Trgobj.translate_registers(list:TAsmList);

      function get_reg_name_full(r: tregister): string;
        var
          rr:tregister;
          sr:TSuperRegister;
        begin
          rr:=r;
          sr:=getsupreg(r);
          if reginfo[sr].live_start=nil then
            begin
              result:='';
              exit;
            end;
          setsupreg(rr,reginfo[sr].colour);
          result:=std_regname(rr);
{$if defined(cpu8bitalu) or defined(cpu16bitalu)}
          if sr<first_int_imreg then
            exit;
          while cg.has_next_reg[sr] do
            begin
              r:=cg.GetNextReg(r);
              sr:=getsupreg(r);
              setsupreg(rr,reginfo[sr].colour);
              result:=result+':'+std_regname(rr);
            end;
{$endif defined(cpu8bitalu) or defined(cpu16bitalu)}
        end;

      var
        hp,p,q:Tai;
        i:shortint;
        u:longint;
        s:string;
{$ifdef arm}
        so:pshifterop;
{$endif arm}

      begin
        { Leave when no imaginary registers are used }
        if maxreg<=first_imaginary then
          exit;
        p:=Tai(list.first);
        while assigned(p) do
          begin
            prefetch(pointer(p.next)^);
            case p.typ of
              ait_regalloc:
                with Tai_regalloc(p) do
                  begin
                    if (getregtype(reg)=regtype) then
                      begin
                        { Only alloc/dealloc is needed for the optimizer, remove
                          other regalloc }
                        if not(ratype in [ra_alloc,ra_dealloc]) then
                          begin
                            q:=Tai(next);
                            list.remove(p);
                            p.free;
                            p:=q;
                            continue;
                          end
                        else
                          begin
                            u:=reginfo[getsupreg(reg)].colour;
                            include(used_in_proc,u);

{$ifdef EXTDEBUG}
                            if u>=maxreginfo then
                              internalerror(2015040501);
{$endif}
                            setsupreg(reg,u);
                          end;
                      end;
                  end;
              ait_varloc:
                begin
                  if (getregtype(tai_varloc(p).newlocation)=regtype) then
                    begin
                      if (cs_asm_source in current_settings.globalswitches) then
                        begin
                          s:=get_reg_name_full(tai_varloc(p).newlocation);
                          if s<>'' then
                            begin
                              if tai_varloc(p).newlocationhi<>NR_NO then
                                s:=get_reg_name_full(tai_varloc(p).newlocationhi)+':'+s;
                              hp:=Tai_comment.Create(strpnew('Var '+tai_varloc(p).varsym.realname+' located in register '+s));
                              list.insertafter(hp,p);
                            end;
                          setsupreg(tai_varloc(p).newlocation,reginfo[getsupreg(tai_varloc(p).newlocation)].colour);
                          if tai_varloc(p).newlocationhi<>NR_NO then
                            setsupreg(tai_varloc(p).newlocationhi,reginfo[getsupreg(tai_varloc(p).newlocationhi)].colour);
                        end;
                      q:=tai(p.next);
                      list.remove(p);
                      p.free;
                      p:=q;
                      continue;
                    end;
                end;

              ait_instruction:
                with Taicpu(p) do
                  begin
                    current_filepos:=fileinfo;
                    {For speed reasons, get_alias isn't used here, instead,
                     assign_colours will also set the colour of coalesced nodes.
                     If there are registers with colour=0, then the coalescednodes
                     list probably doesn't contain these registers, causing
                     assign_colours not to do this properly.}
                    for i:=0 to ops-1 do
                      with oper[i]^ do
                        case typ of
                          Top_reg:
                             if (getregtype(reg)=regtype) then
                               begin
                                 u:=getsupreg(reg);
{$ifdef EXTDEBUG}
                                 if (u>=maxreginfo) then
                                   internalerror(2012101903);
{$endif}
                                 setsupreg(reg,reginfo[u].colour);
                               end;
                          Top_ref:
                            begin
                              if regtype in [R_INTREGISTER,R_ADDRESSREGISTER] then
                                with ref^ do
                                  begin
                                    if (base<>NR_NO) and
                                       (getregtype(base)=regtype) then
                                      begin
                                        u:=getsupreg(base);
{$ifdef EXTDEBUG}
                                        if (u>=maxreginfo) then
                                          internalerror(2012101904);
{$endif}
                                        setsupreg(base,reginfo[u].colour);
                                      end;
                                    if (index<>NR_NO) and
                                       (getregtype(index)=regtype) then
                                      begin
                                        u:=getsupreg(index);
{$ifdef EXTDEBUG}
                                        if (u>=maxreginfo) then
                                          internalerror(2012101905);
{$endif}
                                        setsupreg(index,reginfo[u].colour);
                                      end;
{$if defined(x86)}
                                    if (segment<>NR_NO) and
                                       (getregtype(segment)=regtype) then
                                      begin
                                        u:=getsupreg(segment);
{$ifdef EXTDEBUG}
                                        if (u>=maxreginfo) then
                                          internalerror(2013052401);
{$endif}
                                        setsupreg(segment,reginfo[u].colour);
                                      end;
{$endif defined(x86)}
                                  end;
                            end;
{$ifdef arm}
                          Top_shifterop:
                            begin
                              if regtype=R_INTREGISTER then
                                begin
                                  so:=shifterop;
                                  if (so^.rs<>NR_NO) and
                                     (getregtype(so^.rs)=regtype) then
                                    setsupreg(so^.rs,reginfo[getsupreg(so^.rs)].colour);
                                end;
                            end;
{$endif arm}
                          else
                            ;
                        end;

                    { Maybe the operation can be removed when
                      it is a move and both arguments are the same }
                    if is_same_reg_move(regtype) then
                      begin
                        q:=Tai(p.next);
                        list.remove(p);
                        p.free;
                        p:=q;
                        continue;
                      end;
                  end;
              else
                ;
            end;
            p:=Tai(p.next);
          end;
        current_filepos:=current_procinfo.exitpos;
      end;


    function trgobj.spill_registers(list:TAsmList;headertai:tai):boolean;
    { Returns true if any help registers have been used }
      var
        i : cardinal;
        t : tsuperregister;
        p,q : Tai;
        regs_to_spill_set:Tsuperregisterset;
        spill_temps : ^Tspill_temp_list;
        supreg,x,y : tsuperregister;
        templist : TAsmList;
        j : Longint;
        getnewspillloc : Boolean;
      begin
        spill_registers:=false;
        live_registers.clear;
        { spilling should start with the node with the highest number of interferences, so we can coalesce as
          much as possible spilled nodes (coalesce in case of spilled node means they share the same memory location) }
        sort_spillednodes;
        for i:=first_imaginary to maxreg-1 do
          exclude(reginfo[i].flags,ri_selected);
        spill_temps:=allocmem(sizeof(treference)*maxreg);
        supregset_reset(regs_to_spill_set,false,$ffff);

{$ifdef DEBUG_SPILLCOALESCE}
        writeln('trgobj.spill_registers: Got maxreg ',maxreg);
        writeln('trgobj.spill_registers: Spilling ',spillednodes.length,' nodes');
{$endif DEBUG_SPILLCOALESCE}
        { after each round of spilling, more registers could be used due to allocations for spilling }
        if Length(spillinfo)<maxreg then
          begin
            j:=Length(spillinfo);
            SetLength(spillinfo,maxreg);
            fillchar(spillinfo[j],sizeof(spillinfo[0])*(Length(spillinfo)-j),0);
          end;

        { Allocate temps and insert in front of the list }
        templist:=TAsmList.create;
        { Safe: this procedure is only called if there are spilled nodes. }
        with spillednodes do
          { the node with the highest interferences is the last one }
          for i:=length-1 downto 0 do
            begin
              t:=buf^[i];

{$ifdef DEBUG_SPILLCOALESCE}
              writeln('trgobj.spill_registers: Spilling ',t);
{$endif DEBUG_SPILLCOALESCE}

              spillinfo[t].interferences:=Tinterferencebitmap.create;

              { copy interferences }
              for j:=0 to maxreg-1 do
                spillinfo[t].interferences[0,j]:=ibitmap[t,j];

              { Alternative representation. }
              supregset_include(regs_to_spill_set,t);
              { Clear all interferences of the spilled register. }
              clear_interferences(t);

              getnewspillloc:=true;

              { check if we can "coalesce" spilled nodes. To do so, it is required that they do not
                interfere but are connected by a move instruction

                doing so might save some mem->mem moves }
              if (cs_opt_level3 in current_settings.optimizerswitches) and assigned(reginfo[t].movelist) then
                for j:=0 to reginfo[t].movelist^.header.count-1 do
                  begin
                    x:=Tmoveins(reginfo[t].movelist^.data[j]).x;
                    y:=Tmoveins(reginfo[t].movelist^.data[j]).y;
                    if (x=t) and
                      (spillinfo[get_alias(y)].spilled) and
                      not(spillinfo[get_alias(y)].interferences[0,t]) then
                      begin
                        spill_temps^[t]:=spillinfo[get_alias(y)].spilllocation;
{$ifdef DEBUG_SPILLCOALESCE}
                        writeln('trgobj.spill_registers: Spill coalesce ',t,' to ',y);
{$endif DEBUG_SPILLCOALESCE}
                        getnewspillloc:=false;
                        break;
                      end
                    else if (y=t) and
                      (spillinfo[get_alias(x)].spilled) and
                      not(spillinfo[get_alias(x)].interferences[0,t]) then
                      begin
{$ifdef DEBUG_SPILLCOALESCE}
                        writeln('trgobj.spill_registers: Spill coalesce ',t,' to ',x);
{$endif DEBUG_SPILLCOALESCE}
                        spill_temps^[t]:=spillinfo[get_alias(x)].spilllocation;
                        getnewspillloc:=false;
                        break;
                      end;
                  end;

              if getnewspillloc then
                get_spill_temp(templist,spill_temps,t);

{$ifdef DEBUG_SPILLCOALESCE}
              writeln('trgobj.spill_registers: Spill temp: ',getsupreg(spill_temps^[t].base),'+',spill_temps^[t].offset);
{$endif DEBUG_SPILLCOALESCE}

              { set spilled only as soon as a temp is assigned, else a mov iregX,iregX results in a spill coalesce with itself }
              spillinfo[t].spilled:=true;

              spillinfo[t].spilllocation:=spill_temps^[t];
            end;
        list.insertlistafter(headertai,templist);
        templist.free;
        { Walk through all instructions, we can start with the headertai,
          because before the header tai is only symbols }
        p:=headertai;
        while assigned(p) do
          begin
            case p.typ of
              ait_regalloc:
                with Tai_regalloc(p) do
                  begin
                    if (getregtype(reg)=regtype) then
                      begin
                        {A register allocation of a spilled register can be removed.}
                        supreg:=getsupreg(reg);
                        if supregset_in(regs_to_spill_set,supreg) then
                          begin
                            q:=Tai(p.next);
                            list.remove(p);
                            p.free;
                            p:=q;
                            continue;
                          end
                        else
                          begin
                            case ratype of
                              ra_alloc :
                               live_registers.add(supreg);
                              ra_dealloc :
                               live_registers.delete(supreg);
                              else
                                ;
                            end;
                          end;
                      end;
                  end;
{$ifdef llvm}
              ait_llvmins,
{$endif llvm}
              ait_instruction:
                with tai_cpu_abstract_sym(p) do
                  begin
//                    writeln(gas_op2str[tai_cpu_abstract_sym(p).opcode]);
                    current_filepos:=fileinfo;
                    if instr_spill_register(list,tai_cpu_abstract_sym(p),regs_to_spill_set,spill_temps^) then
                      spill_registers:=true;
                  end;
              else
                ;
            end;
            p:=Tai(p.next);
          end;
        current_filepos:=current_procinfo.exitpos;
        {Safe: this procedure is only called if there are spilled nodes.}
        with spillednodes do
          for i:=0 to length-1 do
            tg.ungettemp(list,spill_temps^[buf^[i]]);
        freemem(spill_temps);
      end;


    function trgobj.do_spill_replace(list:TAsmList;instr:tai_cpu_abstract_sym;orgreg:tsuperregister;const spilltemp:treference):boolean;
      begin
        result:=false;
      end;


    procedure trgobj.do_spill_read(list:TAsmList;pos:tai;const spilltemp:treference;tempreg:tregister;orgsupreg:tsuperregister);
      var
        ins:tai_cpu_abstract_sym;
      begin
        ins:=spilling_create_load(spilltemp,tempreg);
        add_cpu_interferences(ins);
        list.insertafter(ins,pos);
        {$ifdef DEBUG_SPILLING}
        list.Insertbefore(tai_comment.Create(strpnew('Spilling: Spill Read')),ins);
        {$endif}
      end;


    procedure Trgobj.do_spill_written(list:TAsmList;pos:tai;const spilltemp:treference;tempreg:tregister;orgsupreg:tsuperregister);
      var
        ins:tai_cpu_abstract_sym;
      begin
        ins:=spilling_create_store(tempreg,spilltemp);
        add_cpu_interferences(ins);
        list.insertafter(ins,pos);
        {$ifdef DEBUG_SPILLING}
        list.Insertbefore(tai_comment.Create(strpnew('Spilling: Spill Write')),ins);
        {$endif}
      end;


    function trgobj.get_spill_subreg(r : tregister) : tsubregister;
      begin
        result:=defaultsub;
      end;


    function trgobj.addreginfo(var regs: tspillregsinfo; const r: tsuperregisterset; reg: tregister; operation: topertype): boolean;
      var
        i, tmpindex: longint;
        supreg: tsuperregister;
      begin
        result:=false;
        tmpindex := regs.reginfocount;
        supreg := get_alias(getsupreg(reg));
        { did we already encounter this register? }
        for i := 0 to pred(regs.reginfocount) do
          if (regs.reginfo[i].orgreg = supreg) then
            begin
              tmpindex := i;
              break;
            end;
        if tmpindex > high(regs.reginfo) then
          internalerror(2003120301);
        regs.reginfo[tmpindex].orgreg := supreg;
        include(regs.reginfo[tmpindex].spillregconstraints,get_spill_subreg(reg));
        if supregset_in(r,supreg) then
          begin
            { add/update info on this register }
            regs.reginfo[tmpindex].mustbespilled := true;
            case operation of
              operand_read:
                regs.reginfo[tmpindex].regread := true;
              operand_write:
                regs.reginfo[tmpindex].regwritten := true;
              operand_readwrite:
                begin
                  regs.reginfo[tmpindex].regread := true;
                  regs.reginfo[tmpindex].regwritten := true;
                end;
            end;
            result:=true;
          end;
        inc(regs.reginfocount,ord(regs.reginfocount=tmpindex));
      end;


    function trgobj.instr_get_oper_spilling_info(var regs: tspillregsinfo; const r: tsuperregisterset; instr: tai_cpu_abstract_sym; opidx: longint): boolean;
      begin
        result:=false;
        with instr.oper[opidx]^ do
          begin
            case typ of
              top_reg:
                begin
                  if (getregtype(reg) = regtype) then
                    result:=addreginfo(regs,r,reg,instr.spilling_get_operation_type(opidx));
                end;
              top_ref:
                begin
                  if regtype in [R_INTREGISTER,R_ADDRESSREGISTER] then
                    with ref^ do
                      begin
                        if (base <> NR_NO) and
                            (getregtype(base)=regtype) then
                          result:=addreginfo(regs,r,base,instr.spilling_get_operation_type_ref(opidx,base));
                        if (index <> NR_NO) and
                            (getregtype(index)=regtype) then
                          result:=addreginfo(regs,r,index,instr.spilling_get_operation_type_ref(opidx,index)) or result;
{$if defined(x86)}
                        if (segment <> NR_NO) and
                            (getregtype(segment)=regtype) then
                          result:=addreginfo(regs,r,segment,instr.spilling_get_operation_type_ref(opidx,segment)) or result;
{$endif defined(x86)}
                      end;
                end;
{$ifdef ARM}
              top_shifterop:
                begin
                  if regtype in [R_INTREGISTER,R_ADDRESSREGISTER] then
                    if shifterop^.rs<>NR_NO then
                      result:=addreginfo(regs,r,shifterop^.rs,operand_read);
                end;
{$endif ARM}
              else
                ;
            end;
          end;
      end;


    procedure trgobj.try_replace_reg(const regs: tspillregsinfo; var reg: tregister; useloadreg: boolean);
      var
        i: longint;
        supreg: tsuperregister;
      begin
        supreg:=get_alias(getsupreg(reg));
        for i:=0 to pred(regs.reginfocount) do
          if (regs.reginfo[i].mustbespilled) and
             (regs.reginfo[i].orgreg=supreg) then
            begin
              { Only replace supreg }
              if useloadreg then
                setsupreg(reg, getsupreg(regs.reginfo[i].loadreg))
              else
                setsupreg(reg, getsupreg(regs.reginfo[i].storereg));
              break;
            end;
      end;


    procedure trgobj.substitute_spilled_registers(const regs: tspillregsinfo; instr: tai_cpu_abstract_sym; opidx: longint);
      begin
        with instr.oper[opidx]^ do
          case typ of
            top_reg:
              begin
                if (getregtype(reg) = regtype) then
                  try_replace_reg(regs, reg, not ssa_safe or
                    (instr.spilling_get_operation_type(opidx)=operand_read));
              end;
            top_ref:
              begin
                if regtype in [R_INTREGISTER, R_ADDRESSREGISTER] then
                  begin
                    if (ref^.base <> NR_NO) and
                        (getregtype(ref^.base)=regtype) then
                      try_replace_reg(regs, ref^.base,
                        not ssa_safe or (instr.spilling_get_operation_type_ref(opidx, ref^.base)=operand_read));
                    if (ref^.index <> NR_NO) and
                        (getregtype(ref^.index)=regtype) then
                      try_replace_reg(regs, ref^.index,
                        not ssa_safe or (instr.spilling_get_operation_type_ref(opidx, ref^.index)=operand_read));
  {$if defined(x86)}
                    if (ref^.segment <> NR_NO) and
                        (getregtype(ref^.segment)=regtype) then
                      try_replace_reg(regs, ref^.segment, true { always read-only });
  {$endif defined(x86)}
                  end;
              end;
  {$ifdef ARM}
            top_shifterop:
              begin
                if regtype in [R_INTREGISTER, R_ADDRESSREGISTER] then
                  try_replace_reg(regs, shifterop^.rs, true { always read-only });
              end;
  {$endif ARM}
            else
              ;
          end;
      end;


    function trgobj.instr_spill_register(list:TAsmList;
                                         instr:tai_cpu_abstract_sym;
                                         const r:Tsuperregisterset;
                                         const spilltemplist:Tspill_temp_list): boolean;
      var
        counter: longint;
        regs: tspillregsinfo;
        spilled: boolean;
      var
        loadpos,
        storepos : tai;
        oldlive_registers : tsuperregisterworklist;
      begin
        result := false;
        fillchar(regs,sizeof(regs),0);
        for counter := low(regs.reginfo) to high(regs.reginfo) do
          begin
            regs.reginfo[counter].orgreg := RS_INVALID;
            regs.reginfo[counter].loadreg := NR_INVALID;
            regs.reginfo[counter].storereg := NR_INVALID;
          end;
        spilled := false;

        { check whether and if so which and how (read/written) this instructions contains
          registers that must be spilled }
        for counter := 0 to instr.ops-1 do
          spilled:=instr_get_oper_spilling_info(regs,r,instr,counter) or spilled;

        { if no spilling for this instruction we can leave }
        if not spilled then
          exit;

{$if defined(x86) or defined(mips) or defined(sparcgen) or defined(arm) or defined(m68k)}
        { Try replacing the register with the spilltemp. This is useful only
          for the i386,x86_64 that support memory locations for several instructions

          For non-x86 it is nevertheless possible to replace moves to/from the register
          with loads/stores to spilltemp (Sergei) }
        for counter := 0 to pred(regs.reginfocount) do
          with regs.reginfo[counter] do
            begin
              if mustbespilled then
                begin
                  if do_spill_replace(list,instr,orgreg,spilltemplist[orgreg]) then
                    mustbespilled:=false;
                end;
            end;
{$endif defined(x86) or defined(mips) or defined(sparcgen) or defined(arm) or defined(m68k)}

        {
          There are registers that need are spilled. We generate the
          following code for it. The used positions where code need
          to be inserted are marked using #. Note that code is always inserted
          before the positions using pos.previous. This way the position is always
          the same since pos doesn't change, but pos.previous is modified everytime
          new code is inserted.

          [
            - reg_allocs load spills
            - load spills
          ]
          [#loadpos
            - reg_deallocs
            - reg_allocs
          ]
          [
            - reg_deallocs for load-only spills
            - reg_allocs for store-only spills
          ]
          [#instr
            - original instruction
          ]
          [
            - store spills
            - reg_deallocs store spills
          ]
          [#storepos
          ]
        }

        result := true;
        oldlive_registers.copyfrom(live_registers);

        { Process all tai_regallocs belonging to this instruction, ignore explicit
          inserted regallocs. These can happend for example in i386:
             mov ref,ireg26
             <regdealloc ireg26, instr=taicpu of lea>
             <regalloc edi, insrt=nil>
             lea [ireg26+ireg17],edi
          All released registers are also added to the live_registers because
          they can't be used during the spilling }
        loadpos:=tai(instr.previous);
        while assigned(loadpos) and
              (loadpos.typ=ait_regalloc) and
              ((tai_regalloc(loadpos).instr=nil) or
               (tai_regalloc(loadpos).instr=instr)) do
          begin
            { Only add deallocs belonging to the instruction. Explicit inserted deallocs
              belong to the previous instruction and not the current instruction }
            if (tai_regalloc(loadpos).instr=instr) and
               (tai_regalloc(loadpos).ratype=ra_dealloc) then
              live_registers.add(getsupreg(tai_regalloc(loadpos).reg));
            loadpos:=tai(loadpos.previous);
          end;
        loadpos:=tai(loadpos.next);

        { Load the spilled registers }
        for counter := 0 to pred(regs.reginfocount) do
          with regs.reginfo[counter] do
            begin
              if mustbespilled and regread then
                begin
                  loadreg:=getregisterinline(list,regs.reginfo[counter].spillregconstraints);
                  do_spill_read(list,tai(loadpos.previous),spilltemplist[orgreg],loadreg,orgreg);
                  include(reginfo[getsupreg(loadreg)].flags,ri_spill_read);
                end;
            end;

        { Release temp registers of read-only registers, and add reference of the instruction
          to the reginfo }
        for counter := 0 to pred(regs.reginfocount) do
          with regs.reginfo[counter] do
            begin
              if mustbespilled and regread and
                (ssa_safe or
                 not regwritten) then
                begin
                  { The original instruction will be the next that uses this register

                    set weigth of the newly allocated register higher than the old one,
                    so it will selected for spilling with a lower priority than
                    the original one, this prevents an endless spilling loop if orgreg
                    is short living, see e.g. tw25164.pp }
                  add_reg_instruction(instr,loadreg,reginfo[orgreg].weight+1);
                  ungetregisterinline(list,loadreg);
                end;
            end;

        { Allocate temp registers of write-only registers, and add reference of the instruction
          to the reginfo }
        for counter := 0 to pred(regs.reginfocount) do
          with regs.reginfo[counter] do
            begin
              if mustbespilled and regwritten then
                begin
                  { When the register is also loaded there is already a register assigned }
                  if (not regread) or
                     ssa_safe then
                    begin
                      storereg:=getregisterinline(list,regs.reginfo[counter].spillregconstraints);
                      { we also use loadreg for store replacements in case we
                        don't have ensure ssa -> initialise loadreg even if
                        there are no reads }
                      if not regread  then
                       loadreg:=storereg;
                    end
                  else
                    storereg:=loadreg;
                  { The original instruction will be the next that uses this register, this
                    also needs to be done for read-write registers,

                    set weigth of the newly allocated register higher than the old one,
                    so it will selected for spilling with a lower priority than
                    the original one, this prevents an endless spilling loop if orgreg
                    is short living, see e.g. tw25164.pp }
                  add_reg_instruction(instr,storereg,reginfo[orgreg].weight+1);
                end;
            end;

        { store the spilled registers }
        if not assigned(instr.next) then
          list.concat(tai_marker.Create(mark_Position));
        storepos:=tai(instr.next);
        for counter := 0 to pred(regs.reginfocount) do
          with regs.reginfo[counter] do
            begin
              if mustbespilled and regwritten then
                begin
                  do_spill_written(list,tai(storepos.previous),spilltemplist[orgreg],storereg,orgreg);
                  ungetregisterinline(list,storereg);
                end;
            end;

        { now all spilling code is generated we can restore the live registers. This
          must be done after the store because the store can need an extra register
          that also needs to conflict with the registers of the instruction }
        live_registers.done;
        live_registers:=oldlive_registers;

        { substitute registers }
        for counter:=0 to instr.ops-1 do
          substitute_spilled_registers(regs,instr,counter);
        { We have modified the instruction; perhaps the new instruction has
          certain constraints regarding which imaginary registers interfere
          with certain physical registers. }
        add_cpu_interferences(instr);
      end;


{$ifdef DEBUG_SPILLCOALESCE}
    procedure trgobj.write_spill_stats;

      { This procedure outputs spilling statistincs.
        If no spilling has occurred, no output is provided.
        NUM is the number of spilled registers.
        EFF is efficiency of the spilling which is based on
            weight and usage count of registers. Range 0-100%.
            0% means all imaginary registers have been spilled.
            100% means no imaginary registers have been spilled
            (no output in this case).
            Higher value is better.
      }
      var
        i,spillingcounter,max_weight:longint;
        all_weight,spill_weight,d: double;
      begin
        max_weight:=1;
        for i:=0 to high(spillinfo) do
          with reginfo[i] do
            if weight>max_weight then
              max_weight:=weight;

        spillingcounter:=0;
        spill_weight:=0;
        all_weight:=0;
        for i:=0 to high(spillinfo) do
          with reginfo[i] do
            begin
              d:=weight/max_weight*count_uses;
              all_weight:=all_weight+d;
              if spillinfo[i].spilled then
                begin
                  inc(spillingcounter);
                  spill_weight:=spill_weight+d;
                end;
            end;
        if spillingcounter>0 then
          begin
            d:=(1.0-spill_weight/all_weight)*100.0;
            writeln(current_procinfo.procdef.mangledname,' [',regtype,']: spill stats: NUM: ',spillingcounter, ', EFF: ',d:4:1,'%');
          end;
      end;
{$endif DEBUG_SPILLCOALESCE}

end.