freepascal.compiler/compiler/ncgcal.pas

{
    $Id$
    Copyright (c) 1998-2002 by Florian Klaempfl

    Generate assembler for call nodes

    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.

 ****************************************************************************
}
unit ncgcal;

{$i fpcdefs.inc}

interface

    uses
      cpubase,
      globtype,
      symdef,node,ncal;

    type
       tcgcallparanode = class(tcallparanode)
       private
          tempparaloc : tparalocation;
          procedure allocate_tempparaloc;
          procedure push_addr_para;
          procedure push_value_para;
       public
          procedure secondcallparan;override;
       end;

       tcgcallnode = class(tcallnode)
       private
          procedure release_para_temps;
          procedure normal_pass_2;
          procedure inlined_pass_2;
       protected
          { save the size of pushed parameter, needed po_clearstack
            and alignment }
          pushedparasize : longint;
          framepointer_paraloc : tparalocation;
          refcountedtemp : treference;
          procedure handle_return_value;
          {# This routine is used to push the current frame pointer
             on the stack. This is used in nested routines where the
             value of the frame pointer is always pushed as an extra
             parameter.

             The default handling is the standard handling used on
             most stack based machines, where the frame pointer is
             the first invisible parameter.
          }
          function  align_parasize:longint;virtual;
          procedure pop_parasize(pop_size:longint);virtual;
          procedure extra_interrupt_code;virtual;
       public
          procedure pass_2;override;
       end;


implementation

    uses
      systems,
      cutils,verbose,globals,
      symconst,symsym,symtable,defutil,paramgr,
{$ifdef GDB}
  {$ifdef delphi}
      sysutils,
  {$else}
      strings,
  {$endif}
      gdb,
{$endif GDB}
      cgbase,pass_2,
      cpuinfo,aasmbase,aasmtai,
      nbas,nmem,nld,ncnv,
{$ifdef x86}
      cga,cgx86,
{$endif x86}
      ncgutil,cgobj,tgobj,
      procinfo;


{*****************************************************************************
                             TCGCALLPARANODE
*****************************************************************************}

    procedure tcgcallparanode.allocate_tempparaloc;
      begin
         { Allocate (temporary) paralocation }
         tempparaloc:=paraitem.paraloc[callerside];
         if tempparaloc.loc=LOC_REGISTER then
           paramanager.alloctempregs(exprasmlist,tempparaloc)
         else
           paramanager.allocparaloc(exprasmlist,tempparaloc);
      end;


    procedure tcgcallparanode.push_addr_para;
      begin
        if not(left.location.loc in [LOC_CREFERENCE,LOC_REFERENCE]) then
          internalerror(200304235);
        location_release(exprasmlist,left.location);
        allocate_tempparaloc;
        cg.a_paramaddr_ref(exprasmlist,left.location.reference,tempparaloc);
        inc(tcgcallnode(aktcallnode).pushedparasize,POINTER_SIZE);
      end;


    procedure tcgcallparanode.push_value_para;
      var
        href : treference;
{$ifdef i386}
        tempreference : treference;
        sizetopush : longint;
{$endif i386}
        size : longint;
        cgsize : tcgsize;
      begin
        { we've nothing to push when the size of the parameter is 0 }
        if left.resulttype.def.size=0 then
          exit;

        { Move flags and jump in register to make it less complex }
        if left.location.loc in [LOC_FLAGS,LOC_JUMP] then
          location_force_reg(exprasmlist,left.location,def_cgsize(left.resulttype.def),false);

        { Handle Floating point types differently }
        if left.resulttype.def.deftype=floatdef then
         begin
           location_release(exprasmlist,left.location);
           allocate_tempparaloc;
{$ifdef i386}
           case left.location.loc of
             LOC_FPUREGISTER,
             LOC_CFPUREGISTER:
               begin
                  if tempparaloc.loc<>LOC_REFERENCE then
                    internalerror(200309291);
                  size:=align(tfloatdef(left.resulttype.def).size,tempparaloc.alignment);
                  inc(tcgcallnode(aktcallnode).pushedparasize,size);
                  cg.g_stackpointer_alloc(exprasmlist,size);
                  reference_reset_base(href,NR_STACK_POINTER_REG,0);
                  cg.a_loadfpu_reg_ref(exprasmlist,def_cgsize(left.resulttype.def),left.location.register,href);
               end;
             LOC_REFERENCE,
             LOC_CREFERENCE :
               begin
                 sizetopush:=align(left.resulttype.def.size,tempparaloc.alignment);
                 tempreference:=left.location.reference;
                 inc(tempreference.offset,sizetopush);
                 while (sizetopush>0) do
                  begin
                    if (sizetopush>=4) or (tempparaloc.alignment>=4) then
                     begin
                       cgsize:=OS_32;
                       inc(tcgcallnode(aktcallnode).pushedparasize,4);
                       dec(tempreference.offset,4);
                       dec(sizetopush,4);
                     end
                    else
                     begin
                       cgsize:=OS_16;
                       inc(tcgcallnode(aktcallnode).pushedparasize,2);
                       dec(tempreference.offset,2);
                       dec(sizetopush,2);
                     end;
                    cg.a_param_ref(exprasmlist,cgsize,tempreference,tempparaloc);
                  end;
               end;
             else
               internalerror(200204243);
           end;
{$else i386}
           case left.location.loc of
             LOC_FPUREGISTER,
             LOC_CFPUREGISTER:
               cg.a_paramfpu_reg(exprasmlist,def_cgsize(left.resulttype.def),left.location.register,tempparaloc);
             LOC_REFERENCE,
             LOC_CREFERENCE :
               cg.a_paramfpu_ref(exprasmlist,def_cgsize(left.resulttype.def),left.location.reference,tempparaloc)
             else
               internalerror(200204243);
           end;
{$endif i386}
         end
        else
         begin
           { copy the value on the stack or use normal parameter push?
             Check for varargs first because that has no paraitem }
           if not(nf_varargs_para in flags) and
              paramanager.copy_value_on_stack(paraitem.paratyp,left.resulttype.def,
                  aktcallnode.procdefinition.proccalloption) then
            begin
              location_release(exprasmlist,left.location);
              allocate_tempparaloc;
{$ifdef i386}
              if tempparaloc.loc<>LOC_REFERENCE then
                internalerror(200309292);
              if not (left.location.loc in [LOC_REFERENCE,LOC_CREFERENCE]) then
                internalerror(200204241);
              { push on stack }
              size:=align(left.resulttype.def.size,tempparaloc.alignment);
              inc(tcgcallnode(aktcallnode).pushedparasize,size);
              cg.g_stackpointer_alloc(exprasmlist,size);
              reference_reset_base(href,NR_STACK_POINTER_REG,0);
              cg.g_concatcopy(exprasmlist,left.location.reference,href,size,false,false);
{$else i386}
              cg.a_param_copy_ref(exprasmlist,left.resulttype.def.size,left.location.reference,tempparaloc);
{$endif i386}
            end
           else
            begin
              case left.location.loc of
                LOC_CONSTANT,
                LOC_REGISTER,
                LOC_CREGISTER,
                LOC_REFERENCE,
                LOC_CREFERENCE :
                  begin
                    cgsize:=def_cgsize(left.resulttype.def);
                    if cgsize in [OS_64,OS_S64] then
                     begin
                       inc(tcgcallnode(aktcallnode).pushedparasize,8);
                       allocate_tempparaloc;
                       cg64.a_param64_loc(exprasmlist,left.location,tempparaloc);
                       location_release(exprasmlist,left.location);
                     end
                    else
                     begin
                       location_release(exprasmlist,left.location);
                       allocate_tempparaloc;
                       inc(tcgcallnode(aktcallnode).pushedparasize,align(tcgsize2size[tempparaloc.size],tempparaloc.alignment));
                       cg.a_param_loc(exprasmlist,left.location,tempparaloc);
                     end;
                  end;
{$ifdef SUPPORT_MMX}
                LOC_MMXREGISTER,
                LOC_CMMXREGISTER:
                  begin
                     location_release(exprasmlist,left.location);
                     allocate_tempparaloc;
                     inc(tcgcallnode(aktcallnode).pushedparasize,8);
                     cg.a_parammm_reg(exprasmlist,left.location.register);
                  end;
{$endif SUPPORT_MMX}
                else
                  internalerror(200204241);
              end;
           end;
         end;
      end;



    procedure tcgcallparanode.secondcallparan;
      var
         otlabel,
         oflabel : tasmlabel;
      begin
         if not(assigned(paraitem)) or
            not(assigned(paraitem.paratype.def)) or
            not(assigned(paraitem.parasym) or
                (nf_varargs_para in flags)) then
           internalerror(200304242);

         { push from left to right if specified }
         if assigned(right) and
            (aktcallnode.procdefinition.proccalloption in pushleftright_pocalls) then
           tcallparanode(right).secondcallparan;

         { Skip nothingn nodes which are used after disabling
           a parameter }
         if (left.nodetype<>nothingn) then
           begin
             otlabel:=truelabel;
             oflabel:=falselabel;
             objectlibrary.getlabel(truelabel);
             objectlibrary.getlabel(falselabel);
             secondpass(left);

             { handle varargs first, because paraitem.parasym is not valid }
             if (nf_varargs_para in flags) then
               begin
                 if paramanager.push_addr_param(vs_value,left.resulttype.def,
                        aktcallnode.procdefinition.proccalloption) then
                   push_addr_para
                 else
                   push_value_para;
               end
             { hidden parameters }
             else if paraitem.is_hidden then
               begin
                 { don't push a node that already generated a pointer type
                   by address for implicit hidden parameters }
                 if (vo_is_funcret in tvarsym(paraitem.parasym).varoptions) or
                    (not(left.resulttype.def.deftype in [pointerdef,classrefdef]) and
                     paramanager.push_addr_param(paraitem.paratyp,paraitem.paratype.def,
                         aktcallnode.procdefinition.proccalloption)) then
                   push_addr_para
                 else
                   push_value_para;
               end
             { filter array of const c styled args }
             else if is_array_of_const(left.resulttype.def) and (nf_cargs in left.flags) then
               begin
                 { nothing, everything is already pushed }
               end
             { formal def }
             else if (paraitem.paratype.def.deftype=formaldef) then
               begin
                  { allow passing of a constant to a const formaldef }
                  if (tvarsym(paraitem.parasym).varspez=vs_const) and
                     (left.location.loc=LOC_CONSTANT) then
                    location_force_mem(exprasmlist,left.location);

                  { allow @var }
                  if (left.nodetype=addrn) and
                     (not(nf_procvarload in left.flags)) then
                    begin
                      inc(tcgcallnode(aktcallnode).pushedparasize,POINTER_SIZE);
                      location_release(exprasmlist,left.location);
                      allocate_tempparaloc;
                      cg.a_param_loc(exprasmlist,left.location,tempparaloc);
                    end
                  else
                    push_addr_para;
               end
             { Normal parameter }
             else
               begin
                 { don't push a node that already generated a pointer type
                   by address for implicit hidden parameters }
                 if (not(
                         paraitem.is_hidden and
                         (left.resulttype.def.deftype in [pointerdef,classrefdef])
                        ) and
                     paramanager.push_addr_param(paraitem.paratyp,paraitem.paratype.def,
                         aktcallnode.procdefinition.proccalloption)) then
                   begin
                      { Check for passing a constant to var,out parameter }
                      if (paraitem.paratyp in [vs_var,vs_out]) and
                         (left.location.loc<>LOC_REFERENCE) then
                       begin
                         { passing self to a var parameter is allowed in
                           TP and delphi }
                         if not((left.location.loc=LOC_CREFERENCE) and
                                is_self_node(left)) then
                          internalerror(200106041);
                       end;
                      { Force to be in memory }
                      if not(left.location.loc in [LOC_CREFERENCE,LOC_REFERENCE]) then
                        location_force_mem(exprasmlist,left.location);
                      push_addr_para;
                   end
                 else
                   push_value_para;
               end;
             truelabel:=otlabel;
             falselabel:=oflabel;

             { update return location in callnode when this is the function
               result }
             if assigned(paraitem.parasym) and
                (vo_is_funcret in tvarsym(paraitem.parasym).varoptions) then
               location_copy(aktcallnode.location,left.location);
           end;

         { push from right to left }
         if assigned(right) and
            not(aktcallnode.procdefinition.proccalloption in pushleftright_pocalls) then
           tcallparanode(right).secondcallparan;
      end;


{*****************************************************************************
                             TCGCALLNODE
*****************************************************************************}

    procedure tcgcallnode.extra_interrupt_code;
      begin
      end;


    function tcgcallnode.align_parasize:longint;
      begin
        result:=0;
      end;


    procedure tcgcallnode.pop_parasize(pop_size:longint);
      begin
      end;


    procedure tcgcallnode.handle_return_value;
      var
        cgsize : tcgsize;
        hregister : tregister;
        tempnode: tnode;
      begin
        { structured results are easy to handle.... }
        { needed also when result_no_used !! }
        if paramanager.ret_in_param(resulttype.def,procdefinition.proccalloption) then
         begin
           { Location should be setup by the funcret para }
           if location.loc<>LOC_REFERENCE then
            internalerror(200304241);
         end
        else
        { ansi/widestrings must be registered, so we can dispose them }
         if is_ansistring(resulttype.def) or
            is_widestring(resulttype.def) then
          begin
            { the FUNCTION_RESULT_REG is already allocated }
            cg.ungetregister(exprasmlist,NR_FUNCTION_RESULT_REG);
            if not assigned(funcretnode) then
              begin
                location_reset(location,LOC_CREFERENCE,OS_ADDR);
                location.reference:=refcountedtemp;
                cg.a_load_reg_ref(exprasmlist,OS_ADDR,OS_ADDR,NR_FUNCTION_RESULT_REG,location.reference);
              end
            else
              begin
                hregister := cg.getaddressregister(exprasmlist);
                cg.a_load_reg_reg(exprasmlist,OS_ADDR,OS_ADDR,NR_FUNCTION_RESULT_REG,hregister);
                { in case of a regular funcretnode with ret_in_param, the }
                { original funcretnode isn't touched -> make sure it's    }
                { the same here (not sure if it's necessary)              }
                tempnode := funcretnode.getcopy;
                tempnode.pass_2;
                location := tempnode.location;
                tempnode.free;
                cg.g_decrrefcount(exprasmlist,resulttype.def,location.reference, false);
                cg.a_load_reg_ref(exprasmlist,OS_ADDR,OS_ADDR,hregister,location.reference);
                cg.ungetregister(exprasmlist,hregister);
             end;
          end
        else
        { we have only to handle the result if it is used }
         if (nf_return_value_used in flags) then
          begin
            if (resulttype.def.deftype=floatdef) then
              begin
                location_reset(location,LOC_FPUREGISTER,def_cgsize(resulttype.def));
{$ifdef cpufpemu}
                if cs_fp_emulation in aktmoduleswitches then
                  location.register:=NR_FUNCTION_RESULT_REG
                else
{$endif cpufpemu}
                  location.register:=NR_FPU_RESULT_REG;
{$ifdef x86}
                tcgx86(cg).inc_fpu_stack;
{$else x86}
                hregister := cg.getregister(exprasmlist,location.size);
                cg.a_loadfpu_reg_reg(exprasmlist,location.size,location.register,hregister);
                location.register := hregister;
{$endif x86}
              end
            else
              begin
                cgsize:=def_cgsize(resulttype.def);
                if cgsize<>OS_NO then
                 begin
                   location_reset(location,LOC_REGISTER,cgsize);
{$ifndef cpu64bit}
                   if cgsize in [OS_64,OS_S64] then
                    begin
                      { Move the function result to free registers, preferably the
                        FUNCTION_RESULT_REG/FUNCTION_RESULTHIGH_REG, so no move is necessary.}
                      { the FUNCTION_RESULT_LOW_REG/FUNCTION_RESULT_HIGH_REG
                        are already allocated }
                      cg.ungetregister(exprasmlist,NR_FUNCTION_RESULT64_LOW_REG);
                      location.registerlow:=cg.getintregister(exprasmlist,OS_INT);
                      cg.a_load_reg_reg(exprasmlist,OS_32,OS_32,NR_FUNCTION_RESULT64_LOW_REG,location.registerlow);
                      cg.ungetregister(exprasmlist,NR_FUNCTION_RESULT64_HIGH_REG);
                      location.registerhigh:=cg.getintregister(exprasmlist,OS_INT);
                      cg.a_load_reg_reg(exprasmlist,OS_32,OS_32,NR_FUNCTION_RESULT64_HIGH_REG,location.registerhigh);
                    end
                   else
{$endif cpu64bit}
                    begin
                      {Move the function result to a free register, preferably the
                       FUNCTION_RESULT_REG, so no move is necessary.}
                      { the FUNCTION_RESULT_REG is already allocated }
                      cg.ungetregister(exprasmlist,NR_FUNCTION_RESULT_REG);
                      { change register size after the unget because the
                      getregister was done for the full register }
                      location.register:=cg.getintregister(exprasmlist,cgsize);
                      cg.a_load_reg_reg(exprasmlist,cgsize,cgsize,cg.makeregsize(NR_FUNCTION_RESULT_REG,cgsize),location.register);
                    end;
                 end
                else
                 begin
                   if resulttype.def.size>0 then
                     internalerror(200305131);
                 end;
              end;
          end
        else
          begin
            cgsize:=def_cgsize(resulttype.def);

            { an object constructor is a function with pointer result }
            if (procdefinition.proctypeoption=potype_constructor) then
              cgsize:=OS_ADDR;

            if cgsize<>OS_NO then
{$ifndef cpu64bit}
              if cgsize in [OS_64,OS_S64] then
                begin
                  cg.ungetregister(exprasmlist,NR_FUNCTION_RESULT64_LOW_REG);
                  cg.ungetregister(exprasmlist,NR_FUNCTION_RESULT64_HIGH_REG);
                end
              else
{$endif cpu64bit}
                cg.ungetregister(exprasmlist,NR_FUNCTION_RESULT_REG);
            location_reset(location,LOC_VOID,OS_NO);
          end;
      end;


    procedure tcgcallnode.release_para_temps;
      var
        hp  : tnode;
        ppn : tcallparanode;
      begin
        { Release temps from parameters }
        ppn:=tcallparanode(left);
        while assigned(ppn) do
          begin
             if assigned(ppn.left) then
               begin
                 { don't release the funcret temp }
                 if not(assigned(ppn.paraitem.parasym)) or
                    not(vo_is_funcret in tvarsym(ppn.paraitem.parasym).varoptions) then
                   location_freetemp(exprasmlist,ppn.left.location);
                 { process also all nodes of an array of const }
                 if ppn.left.nodetype=arrayconstructorn then
                   begin
                     if assigned(tarrayconstructornode(ppn.left).left) then
                      begin
                        hp:=ppn.left;
                        while assigned(hp) do
                         begin
                           location_freetemp(exprasmlist,tarrayconstructornode(hp).left.location);
                           hp:=tarrayconstructornode(hp).right;
                         end;
                      end;
                   end;
               end;
             ppn:=tcallparanode(ppn.right);
          end;
      end;


    procedure tcgcallnode.normal_pass_2;
      var
         regs_to_push_other : totherregisterset;
         regs_to_alloc,regs_to_free:Tsuperregisterset;
         oldpushedparasize : longint;
         { adress returned from an I/O-error }
         { help reference pointer }
         href : treference;
         pop_size : longint;
         pvreg,
         vmtreg : tregister;
         oldaktcallnode : tcallnode;

         procedure pushparas;
         var
           ppn : tcgcallparanode;
         begin
           { copy all resources to the allocated registers }
           ppn:=tcgcallparanode(left);
           while assigned(ppn) do
             begin
               if ppn.tempparaloc.loc=LOC_REGISTER then
                 begin
                   paramanager.freeparaloc(exprasmlist,ppn.tempparaloc);
                   paramanager.allocparaloc(exprasmlist,ppn.paraitem.paraloc[callerside]);
{$ifdef sparc}
                   case ppn.tempparaloc.size of
                     OS_F32 :
                       ppn.tempparaloc.size:=OS_32;
                     OS_F64 :
                       ppn.tempparaloc.size:=OS_64;
                   end;
{$endif sparc}
{$ifndef cpu64bit}
                   if ppn.tempparaloc.size in [OS_64,OS_S64] then
                     begin
                       cg.a_load_reg_reg(exprasmlist,OS_32,OS_32,ppn.tempparaloc.registerlow,
                          ppn.paraitem.paraloc[callerside].registerlow);
                       cg.a_load_reg_reg(exprasmlist,OS_32,OS_32,ppn.tempparaloc.registerhigh,
                          ppn.paraitem.paraloc[callerside].registerhigh);
                     end
                   else
{$endif cpu64bit}
                     cg.a_load_reg_reg(exprasmlist,ppn.tempparaloc.size,ppn.tempparaloc.size,
                         ppn.tempparaloc.register,ppn.paraitem.paraloc[callerside].register);
                 end;
               ppn:=tcgcallparanode(ppn.right);
             end;
         end;

         procedure freeparas;
         var
           ppn : tcgcallparanode;
         begin
           { free the resources allocated for the parameters }
           ppn:=tcgcallparanode(left);
           while assigned(ppn) do
             begin
               if ppn.tempparaloc.loc=LOC_REGISTER then
                 paramanager.freeparaloc(exprasmlist,ppn.tempparaloc);
               paramanager.freeparaloc(exprasmlist,ppn.paraitem.paraloc[callerside]);
               ppn:=tcgcallparanode(ppn.right);
             end;
         end;

      begin
         if not assigned(procdefinition) then
           internalerror(200305264);

         { calculate the parameter info for the procdef }
         if not procdefinition.has_paraloc_info then
           begin
             paramanager.create_paraloc_info(procdefinition,callerside);
             procdefinition.has_paraloc_info:=true;
           end;

         { calculate the parameter info for varargs }
         if assigned(varargsparas) then
           paramanager.create_varargs_paraloc_info(procdefinition,varargsparas);

         if not assigned(funcretnode) then
           begin
             { if we allocate the temp. location for ansi- or widestrings }
             { already here, we avoid later a push/pop                    }
             if is_widestring(resulttype.def) then
               begin
                 tg.gettemp(exprasmlist,pointer_size,tt_widestring,refcountedtemp);
                 cg.g_decrrefcount(exprasmlist,resulttype.def,refcountedtemp,false);
               end
             else if is_ansistring(resulttype.def) then
               begin
                 tg.GetTemp(exprasmlist,pointer_size,tt_ansistring,refcountedtemp);
                 cg.g_decrrefcount(exprasmlist,resulttype.def,refcountedtemp,false);
               end;
           end;

        regs_to_alloc:=paramanager.get_volatile_registers_int(procdefinition.proccalloption);
        regs_to_push_other:=paramanager.get_volatile_registers_fpu(procdefinition.proccalloption);

        { Include Function result registers }
        if (not is_void(resulttype.def)) then
          begin
            case procdefinition.funcret_paraloc[callerside].loc of
              LOC_REGISTER,LOC_CREGISTER:
                begin
{$ifndef cpu64bit}
                  if procdefinition.funcret_paraloc[callerside].size in [OS_S64,OS_64] then
                    begin
                      include(regs_to_alloc,getsupreg(procdefinition.funcret_paraloc[callerside].registerlow));
                      include(regs_to_alloc,getsupreg(procdefinition.funcret_paraloc[callerside].registerhigh));
                    end
                 else
{$endif cpu64bit}
                   include(regs_to_alloc,getsupreg(procdefinition.funcret_paraloc[callerside].register));
                end;
            end;
          end;

         { Save registers destroyed by the call }
         {$warning fime saveusedotherregisters.}
{         cg.saveusedotherregisters(exprasmlist,pushedother,regs_to_push_other);}

         { Initialize for pushing the parameters }
         oldpushedparasize:=pushedparasize;
         pushedparasize:=0;

         { Process parameters, register parameters will be loaded
           in imaginary registers. The actual load to the correct
           register is done just before the call }
         oldaktcallnode:=aktcallnode;
         aktcallnode:=self;
         if assigned(left) then
           tcallparanode(left).secondcallparan;
         aktcallnode:=oldaktcallnode;

         { Align stack if required }
         pop_size:=align_parasize;

         { procedure variable or normal function call ? }
         if (right=nil) then
           begin
             if (po_virtualmethod in procdefinition.procoptions) and
                assigned(methodpointer) then
               begin
                 secondpass(methodpointer);
                 location_force_reg(exprasmlist,methodpointer.location,OS_ADDR,false);

                 { virtual methods require an index }
                 if tprocdef(procdefinition).extnumber=-1 then
                   internalerror(200304021);
                 { VMT should already be loaded in a register }
                 if methodpointer.location.register=NR_NO then
                   internalerror(200304022);

                 { test validity of VMT }
                 if not(is_interface(tprocdef(procdefinition)._class)) and
                    not(is_cppclass(tprocdef(procdefinition)._class)) then
                   cg.g_maybe_testvmt(exprasmlist,methodpointer.location.register,tprocdef(procdefinition)._class);
               end;
               {$warning fixme regvars}
{              rg.saveotherregvars(exprasmlist,regs_to_push_other);}

              if (po_virtualmethod in procdefinition.procoptions) and
                 assigned(methodpointer) then
                begin
                   vmtreg:=methodpointer.location.register;

                   { release self }
                   cg.ungetregister(exprasmlist,vmtreg);
                   pvreg:=cg.getabtintregister(exprasmlist,OS_ADDR);
                   reference_reset_base(href,vmtreg,
                      tprocdef(procdefinition)._class.vmtmethodoffset(tprocdef(procdefinition).extnumber));
                   cg.a_load_ref_reg(exprasmlist,OS_ADDR,OS_ADDR,href,pvreg);

                   { Load parameters that are in temporary registers in the
                     correct parameter register }
                   if assigned(left) then
                     pushparas;

                   { Release register containing procvar }
                   cg.ungetregister(exprasmlist,pvreg);

                   { free the resources allocated for the parameters }
                   freeparas;

                   cg.allocexplicitregisters(exprasmlist,R_INTREGISTER,regs_to_alloc);
                   cg.allocexplicitregisters(exprasmlist,R_SSEREGISTER,paramanager.get_volatile_registers_mm(procdefinition.proccalloption));

                   { call method }
                   cg.a_call_reg(exprasmlist,pvreg);
                end
              else
                begin
                  { Load parameters that are in temporary registers in the
                    correct parameter register }
                  if assigned(left) then
                    pushparas;

                  { free the resources allocated for the parameters }
                  freeparas;

                  cg.allocexplicitregisters(exprasmlist,R_INTREGISTER,regs_to_alloc);
                  cg.allocexplicitregisters(exprasmlist,R_SSEREGISTER,paramanager.get_volatile_registers_mm(procdefinition.proccalloption));

                  { Calling interrupt from the same code requires some
                    extra code }
                  if (po_interrupt in procdefinition.procoptions) then
                    extra_interrupt_code;
                  cg.a_call_name(exprasmlist,tprocdef(procdefinition).mangledname);
               end;
           end
         else
           { now procedure variable case }
           begin
              secondpass(right);

              location_release(exprasmlist,right.location);
              pvreg:=cg.getabtintregister(exprasmlist,OS_ADDR);
              { Only load OS_ADDR from the reference }
              if right.location.loc in [LOC_REFERENCE,LOC_CREFERENCE] then
                cg.a_load_ref_reg(exprasmlist,OS_ADDR,OS_ADDR,right.location.reference,pvreg)
              else
                cg.a_load_loc_reg(exprasmlist,OS_ADDR,right.location,pvreg);
              location_freetemp(exprasmlist,right.location);

              { Load parameters that are in temporary registers in the
                correct parameter register }
              if assigned(left) then
                pushparas;

              { Release register containing procvar }
              cg.ungetregister(exprasmlist,pvreg);

              { free the resources allocated for the parameters }
              freeparas;

              cg.allocexplicitregisters(exprasmlist,R_INTREGISTER,regs_to_alloc);
              cg.allocexplicitregisters(exprasmlist,R_MMREGISTER,paramanager.get_volatile_registers_mm(procdefinition.proccalloption));

              { Calling interrupt from the same code requires some
                extra code }
              if (po_interrupt in procdefinition.procoptions) then
                extra_interrupt_code;
              {$warning fixme regvars.}
{              rg.saveotherregvars(exprasmlist,ALL_OTHERREGISTERS);}
              cg.a_call_reg(exprasmlist,pvreg);
           end;

         { Need to remove the parameters from the stack? }
         if (procdefinition.proccalloption in clearstack_pocalls) then
          begin
            { the old pop_size was already included in pushedparasize }
            pop_size:=pushedparasize;
            { for Cdecl functions we don't need to pop the funcret when it
              was pushed by para }
            if paramanager.ret_in_param(procdefinition.rettype.def,procdefinition.proccalloption) then
              dec(pop_size,POINTER_SIZE);
          end;

         { Remove parameters/alignment from the stack }
         if pop_size>0 then
           pop_parasize(pop_size);

         { Reserve space for storing parameters that will be pushed }
         current_procinfo.allocate_push_parasize(pushedparasize);

         { Restore }
         pushedparasize:=oldpushedparasize;

         { Release registers, but not the registers that contain the
           function result }
         regs_to_free:=regs_to_alloc;
         if (not is_void(resulttype.def)) then
           begin
             case procdefinition.funcret_paraloc[callerside].loc of
               LOC_REGISTER,LOC_CREGISTER:
                 begin
{$ifndef cpu64bit}
                   if procdefinition.funcret_paraloc[callerside].size in [OS_S64,OS_64] then
                     begin
                       exclude(regs_to_free,getsupreg(procdefinition.funcret_paraloc[callerside].registerlow));
                       exclude(regs_to_free,getsupreg(procdefinition.funcret_paraloc[callerside].registerhigh));
                     end
                   else
{$endif cpu64bit}
                     exclude(regs_to_free,getsupreg(procdefinition.funcret_paraloc[callerside].register));
                 end;
             end;
           end;
         cg.deallocexplicitregisters(exprasmlist,R_MMREGISTER,paramanager.get_volatile_registers_mm(procdefinition.proccalloption));
         cg.deallocexplicitregisters(exprasmlist,R_INTREGISTER,regs_to_free);

         { handle function results }
         if (not is_void(resulttype.def)) then
           handle_return_value
         else
           location_reset(location,LOC_VOID,OS_NO);

         { perhaps i/o check ? }
         if (cs_check_io in aktlocalswitches) and
            (po_iocheck in procdefinition.procoptions) and
            not(po_iocheck in current_procinfo.procdef.procoptions) and
            { no IO check for methods and procedure variables }
            (right=nil) and
            not(po_virtualmethod in procdefinition.procoptions) then
           begin
              cg.allocexplicitregisters(exprasmlist,R_INTREGISTER,paramanager.get_volatile_registers_int(pocall_default));
              cg.a_call_name(exprasmlist,'FPC_IOCHECK');
              cg.deallocexplicitregisters(exprasmlist,R_INTREGISTER,paramanager.get_volatile_registers_int(pocall_default));
           end;

         { restore registers }
         {$warning fixme restoreusedotherregisters}
{         rg.restoreusedotherregisters(exprasmlist,pushedother);}

         { release temps of paras }
         release_para_temps;

         { if return value is not used }
         if (not(nf_return_value_used in flags)) and (not is_void(resulttype.def)) then
           begin
              if location.loc in [LOC_CREFERENCE,LOC_REFERENCE] then
                begin
                   { data which must be finalized ? }
                   if (resulttype.def.needs_inittable) then
                      cg.g_finalize(exprasmlist,resulttype.def,location.reference,false);
                   { release unused temp }
                   tg.ungetiftemp(exprasmlist,location.reference)
                end
              else if location.loc=LOC_FPUREGISTER then
                begin
{$ifdef x86}
                  { release FPU stack }
                  emit_reg(A_FSTP,S_NO,NR_FPU_RESULT_REG);
{$endif x86}
                end;
           end;
      end;



    procedure tcgcallnode.inlined_pass_2;
      var
         oldaktcallnode : tcallnode;
         oldprocinfo : tprocinfo;
         oldinlining_procedure : boolean;
         inlineentrycode,inlineexitcode : TAAsmoutput;
         usesacc,usesacchi,usesfpu : boolean;
{$ifdef GDB}
         startlabel,endlabel : tasmlabel;
         pp : pchar;
         mangled_length  : longint;
{$endif GDB}
      begin
         if not(assigned(procdefinition) and (procdefinition.deftype=procdef)) then
           internalerror(200305262);

         oldinlining_procedure:=inlining_procedure;
         oldprocinfo:=current_procinfo;
         { we're inlining a procedure }
         inlining_procedure:=true;

         { calculate registers to pass the parameters }
         paramanager.create_inline_paraloc_info(procdefinition);

         { create temp procinfo }
         current_procinfo:=cprocinfo.create(nil);
         current_procinfo.procdef:=tprocdef(procdefinition);

         { Add inling start }
         exprasmList.concat(Tai_Marker.Create(InlineStart));
{$ifdef extdebug}
         exprasmList.concat(tai_comment.Create(strpnew('Start of inlined proc')));
{$endif extdebug}

         { Allocate parameters and locals }
         gen_alloc_inline_parast(exprasmlist,tparasymtable(current_procinfo.procdef.parast));
         if current_procinfo.procdef.localst.symtabletype=localsymtable then
           gen_alloc_localst(exprasmlist,tlocalsymtable(current_procinfo.procdef.localst));

{$ifdef GDB}
         if (cs_debuginfo in aktmoduleswitches) then
           begin
             objectlibrary.getaddrlabel(startlabel);
             objectlibrary.getaddrlabel(endlabel);
             cg.a_label(exprasmlist,startlabel);

             { Here we must include the para and local symtable info }
             procdefinition.concatstabto(withdebuglist);

             mangled_length:=length(oldprocinfo.procdef.mangledname);
             getmem(pp,mangled_length+50);
             strpcopy(pp,'192,0,0,'+startlabel.name);
             if (target_info.use_function_relative_addresses) then
               begin
                 strpcopy(strend(pp),'-');
                 strpcopy(strend(pp),oldprocinfo.procdef.mangledname);
               end;
             withdebugList.concat(Tai_stabn.Create(strnew(pp)));
           end;
{$endif GDB}

         { if we allocate the temp. location for ansi- or widestrings }
         { already here, we avoid later a push/pop                    }
         if is_widestring(resulttype.def) then
           begin
             tg.GetTemp(exprasmlist,pointer_size,tt_widestring,refcountedtemp);
             cg.g_decrrefcount(exprasmlist,resulttype.def,refcountedtemp,false);
           end
         else if is_ansistring(resulttype.def) then
           begin
             tg.GetTemp(exprasmlist,pointer_size,tt_ansistring,refcountedtemp);
             cg.g_decrrefcount(exprasmlist,resulttype.def,refcountedtemp,false);
           end;

         { Push parameters }
         oldaktcallnode:=aktcallnode;
         aktcallnode:=self;
         if assigned(left) then
           tcallparanode(left).secondcallparan;
         aktcallnode:=oldaktcallnode;

         { takes care of local data initialization }
         inlineentrycode:=TAAsmoutput.Create;
         inlineexitcode:=TAAsmoutput.Create;

         gen_load_para_value(inlineentrycode);
         gen_initialize_code(inlineentrycode,true);
         if po_assembler in current_procinfo.procdef.procoptions then
           inlineentrycode.insert(Tai_marker.Create(asmblockstart));
         exprasmList.concatlist(inlineentrycode);

         { process the inline code }
         secondpass(inlinecode);

         gen_finalize_code(inlineexitcode,true);
         gen_load_return_value(inlineexitcode,usesacc,usesacchi,usesfpu);
         if po_assembler in current_procinfo.procdef.procoptions then
           inlineexitcode.concat(Tai_marker.Create(asmblockend));
         exprasmlist.concatlist(inlineexitcode);

         inlineentrycode.free;
         inlineexitcode.free;
{$ifdef extdebug}
         exprasmList.concat(tai_comment.Create(strpnew('End of inlined proc')));
{$endif extdebug}
         exprasmList.concat(Tai_Marker.Create(InlineEnd));

         { handle function results }
         if (not is_void(resulttype.def)) then
           handle_return_value
         else
           location_reset(location,LOC_VOID,OS_NO);

         { perhaps i/o check ? }
         if (cs_check_io in aktlocalswitches) and
            (po_iocheck in procdefinition.procoptions) and
            not(po_iocheck in current_procinfo.procdef.procoptions) and
            { no IO check for methods and procedure variables }
            (right=nil) and
            not(po_virtualmethod in procdefinition.procoptions) then
           begin
              cg.allocexplicitregisters(exprasmlist,R_INTREGISTER,paramanager.get_volatile_registers_int(pocall_default));
              cg.a_call_name(exprasmlist,'FPC_IOCHECK');
              cg.deallocexplicitregisters(exprasmlist,R_INTREGISTER,paramanager.get_volatile_registers_int(pocall_default));
           end;

         { release temps of paras }
         release_para_temps;

         { if return value is not used }
         if (not is_void(resulttype.def)) and
            (not(nf_return_value_used in flags)) then
           begin
              if location.loc in [LOC_CREFERENCE,LOC_REFERENCE] then
                begin
                   { data which must be finalized ? }
                   if (resulttype.def.needs_inittable) then
                      cg.g_finalize(exprasmlist,resulttype.def,location.reference,false);
                   { release unused temp }
                   tg.ungetiftemp(exprasmlist,location.reference)
                end
              else if location.loc=LOC_FPUREGISTER then
                begin
{$ifdef x86}
                  { release FPU stack }
                  emit_reg(A_FSTP,S_NO,NR_FPU_RESULT_REG);
{$endif x86}
                end;
           end;

         { Release parameters and locals }
         gen_free_parast(exprasmlist,tparasymtable(current_procinfo.procdef.parast));
         if current_procinfo.procdef.localst.symtabletype=localsymtable then
           gen_free_localst(exprasmlist,tlocalsymtable(current_procinfo.procdef.localst));

         { release procinfo }
         current_procinfo.free;
         current_procinfo:=oldprocinfo;

{$ifdef GDB}
         if (cs_debuginfo in aktmoduleswitches) then
           begin
             cg.a_label(exprasmlist,endlabel);
             strpcopy(pp,'224,0,0,'+endlabel.name);
            if (target_info.use_function_relative_addresses) then
              begin
                strpcopy(strend(pp),'-');
                strpcopy(strend(pp),oldprocinfo.procdef.mangledname);
              end;
             withdebugList.concat(Tai_stabn.Create(strnew(pp)));
             freemem(pp,mangled_length+50);
           end;
{$endif GDB}

         { restore }
         current_procinfo:=oldprocinfo;
         inlining_procedure:=oldinlining_procedure;
      end;


    procedure tcgcallnode.pass_2;
      begin
        if assigned(inlinecode) then
          inlined_pass_2
        else
          normal_pass_2;
      end;


begin
   ccallparanode:=tcgcallparanode;
   ccallnode:=tcgcallnode;
end.
{
  $Log$
  Revision 1.130  2003-10-11 16:06:42  florian
    * fixed some MMX<->SSE
    * started to fix ppc, needs an overhaul
    + stabs info improve for spilling, not sure if it works correctly/completly
    - MMX_SUPPORT removed from Makefile.fpc

  Revision 1.129  2003/10/10 17:48:13  peter
    * old trgobj moved to x86/rgcpu and renamed to trgx86fpu
    * tregisteralloctor renamed to trgobj
    * removed rgobj from a lot of units
    * moved location_* and reference_* to cgobj
    * first things for mmx register allocation

  Revision 1.128  2003/10/10 09:21:53  marco
   * typo fix from Wiktor

  Revision 1.127  2003/10/09 21:31:37  daniel
    * Register allocator splitted, ans abstract now

  Revision 1.126  2003/10/07 15:17:07  peter
    * inline supported again, LOC_REFERENCEs are used to pass the
      parameters
    * inlineparasymtable,inlinelocalsymtable removed
    * exitlabel inserting fixed

  Revision 1.125  2003/10/05 21:21:52  peter
    * c style array of const generates callparanodes
    * varargs paraloc fixes

  Revision 1.124  2003/10/03 22:00:33  peter
    * parameter alignment fixes

  Revision 1.123  2003/10/01 20:34:48  peter
    * procinfo unit contains tprocinfo
    * cginfo renamed to cgbase
    * moved cgmessage to verbose
    * fixed ppc and sparc compiles

  Revision 1.122  2003/09/30 21:02:37  peter
    * updates for inlining

  Revision 1.121  2003/09/30 19:55:19  peter
    * remove abt reg for vmtreg

  Revision 1.120  2003/09/29 20:58:55  peter
    * optimized releasing of registers

  Revision 1.119  2003/09/28 17:55:03  peter
    * parent framepointer changed to hidden parameter
    * tloadparentfpnode added

  Revision 1.118  2003/09/28 13:54:43  peter
    * removed a_call_ref

  Revision 1.117  2003/09/25 21:28:00  peter
    * parameter fixes

  Revision 1.116  2003/09/23 17:56:05  peter
    * locals and paras are allocated in the code generation
    * tvarsym.localloc contains the location of para/local when
      generating code for the current procedure

  Revision 1.115  2003/09/16 16:17:01  peter
    * varspez in calls to push_addr_param

  Revision 1.114  2003/09/14 19:17:39  peter
    * don't use a_call_ref because it can use a parameter register
      as temp

  Revision 1.113  2003/09/11 11:54:59  florian
    * improved arm code generation
    * move some protected and private field around
    * the temp. register for register parameters/arguments are now released
      before the move to the parameter register is done. This improves
      the code in a lot of cases.

  Revision 1.112  2003/09/10 08:31:47  marco
   * Patch from Peter for paraloc

  Revision 1.111  2003/09/07 22:09:35  peter
    * preparations for different default calling conventions
    * various RA fixes

  Revision 1.110  2003/09/04 15:39:58  peter
    * released useparatemp

  Revision 1.109  2003/09/03 15:55:00  peter
    * NEWRA branch merged

  Revision 1.108.2.4  2003/09/01 21:02:55  peter
    * sparc updates for new tregister

  Revision 1.108.2.3  2003/08/31 21:07:44  daniel
    * callparatemp ripped

  Revision 1.108.2.2  2003/08/29 17:28:59  peter
    * next batch of updates

  Revision 1.108.2.1  2003/08/27 20:23:55  peter
    * remove old ra code

  Revision 1.108  2003/08/21 22:14:16  olle
    - removed parameter from fpc_iocheck

  Revision 1.107  2003/08/17 16:59:20  jonas
    * fixed regvars so they work with newra (at least for ppc)
    * fixed some volatile register bugs
    + -dnotranslation option for -dnewra, which causes the registers not to
      be translated from virtual to normal registers. Requires support in
      the assembler writer as well, which is only implemented in aggas/
      agppcgas currently

  Revision 1.106  2003/08/16 18:56:40  marco
   * fix from Jonas.

  Revision 1.105  2003/08/11 21:18:20  peter
    * start of sparc support for newra

  Revision 1.104  2003/08/11 14:22:06  mazen
  - dupplicated code removed

  Revision 1.103  2003/07/23 11:01:14  jonas
    * several rg.allocexplicitregistersint/rg.deallocexplicitregistersint
      pairs round calls to helpers

  Revision 1.102  2003/07/21 13:51:50  jonas
    * fixed 64bit int results with -dnewra (you can't free both registers and
      then allocate two new ones, because then the registers could be reversed
      afterwards -> you get something like "movl %eax, %edx; movl %edx,%eax")

  Revision 1.101  2003/07/08 21:24:59  peter
    * sparc fixes

  Revision 1.100  2003/07/06 21:50:33  jonas
    * fixed ppc compilation problems and changed VOLATILE_REGISTERS for x86
      so that it doesn't include ebp and esp anymore

  Revision 1.99  2003/07/06 17:58:22  peter
    * framepointer fixes for sparc
    * parent framepointer code more generic

  Revision 1.98  2003/07/06 15:31:20  daniel
    * Fixed register allocator. *Lots* of fixes.

  Revision 1.97  2003/07/05 20:21:26  jonas
     * create_paraloc_info() is now called separately for the caller and
       callee info
     * fixed ppc cycle

  Revision 1.96  2003/07/02 22:18:04  peter
    * paraloc splitted in paraloc[callerside],calleeparaloc
    * sparc calling convention updates

  Revision 1.95  2003/06/17 16:34:44  jonas
    * lots of newra fixes (need getfuncretparaloc implementation for i386)!
    * renamed all_intregisters to paramanager.get_volatile_registers_int(pocall_default) and made it
      processor dependent

  Revision 1.94  2003/06/15 16:52:02  jonas
    * release function result registers if the functino result isn't used
    * don't allocate function result register with -dnewra if there is none
    * some optimizations for non-x86 processor (don't save any registers
      before a call)

  Revision 1.93  2003/06/13 21:19:30  peter
    * current_procdef removed, use current_procinfo.procdef instead

  Revision 1.92  2003/06/12 21:10:50  peter
    * newra fixes

  Revision 1.91  2003/06/12 18:38:45  jonas
    * deallocate parameter registers in time for newra
    * for non-i386, procvars and methodpointers always have to be processed
      in advance, whether or not newra is defined

  Revision 1.90  2003/06/09 14:54:26  jonas
    * (de)allocation of registers for parameters is now performed properly
      (and checked on the ppc)
    - removed obsolete allocation of all parameter registers at the start
      of a procedure (and deallocation at the end)

  Revision 1.89  2003/06/09 12:23:29  peter
    * init/final of procedure data splitted from genentrycode
    * use asmnode getposition to insert final at the correct position
      als for the implicit try...finally

  Revision 1.88  2003/06/08 20:01:53  jonas
    * optimized assignments with on the right side a function that returns
      an ansi- or widestring

  Revision 1.87  2003/06/08 18:21:47  jonas
    * fixed weird error in the copyleft statement :)

  Revision 1.86  2003/06/07 18:57:04  jonas
    + added freeintparaloc
    * ppc get/freeintparaloc now check whether the parameter regs are
      properly allocated/deallocated (and get an extra list para)
    * ppc a_call_* now internalerrors if pi_do_call is not yet set
    * fixed lot of missing pi_do_call's

  Revision 1.85  2003/06/04 06:43:36  jonas
    * fixed double secondpassing of procvar loads

  Revision 1.84  2003/06/03 21:11:09  peter
    * cg.a_load_* get a from and to size specifier
    * makeregsize only accepts newregister
    * i386 uses generic tcgnotnode,tcgunaryminus

  Revision 1.83  2003/06/03 20:27:02  daniel
    * Restored original methodpointer code for non newra case

  Revision 1.82  2003/06/03 13:01:59  daniel
    * Register allocator finished

  Revision 1.81  2003/06/01 21:38:06  peter
    * getregisterfpu size parameter added
    * op_const_reg size parameter added
    * sparc updates

  Revision 1.80  2003/05/31 15:05:28  peter
    * FUNCTION_RESULT64_LOW/HIGH_REG added for int64 results

  Revision 1.79  2003/05/31 00:59:44  peter
    * typo in FUNCTION_RESULT_REG

  Revision 1.78  2003/05/30 23:57:08  peter
    * more sparc cleanup
    * accumulator removed, splitted in function_return_reg (called) and
      function_result_reg (caller)

  Revision 1.77  2003/05/29 10:05:40  jonas
    * free callparatemps created for call-by-reference parameters

  Revision 1.76  2003/05/28 23:58:18  jonas
    * added missing initialization of rg.usedintin,byproc
    * ppc now also saves/restores used fpu registers
    * ncgcal doesn't add used registers to usedby/inproc anymore, except for
      i386

  Revision 1.75  2003/05/26 21:17:17  peter
    * procinlinenode removed
    * aktexit2label removed, fast exit removed
    + tcallnode.inlined_pass_2 added

  Revision 1.74  2003/05/25 11:34:17  peter
    * methodpointer self pushing fixed

  Revision 1.73  2003/05/25 08:59:16  peter
    * inline fixes

  Revision 1.72  2003/05/24 13:36:54  jonas
    * save fpu results in a normal fpu register on non-x86 processors

  Revision 1.71  2003/05/23 19:35:50  jonas
    - undid previous commit, it was wrong

  Revision 1.70  2003/05/23 19:11:58  jonas
    * fixed tests for whether a certain int register is unused

  Revision 1.69  2003/05/23 18:01:56  jonas
    * fixed ppc compiler

  Revision 1.68  2003/05/23 14:27:35  peter
    * remove some unit dependencies
    * current_procinfo changes to store more info

  Revision 1.67  2003/05/17 13:30:08  jonas
    * changed tt_persistant to tt_persistent :)
    * tempcreatenode now doesn't accept a boolean anymore for persistent
      temps, but a ttemptype, so you can also create ansistring temps etc

  Revision 1.66  2003/05/16 14:33:31  peter
    * regvar fixes

  Revision 1.65  2003/05/15 18:58:53  peter
    * removed selfpointer_offset, vmtpointer_offset
    * tvarsym.adjusted_address
    * address in localsymtable is now in the real direction
    * removed some obsolete globals

  Revision 1.64  2003/05/14 19:36:54  jonas
    * patch from Peter for int64 function results

  Revision 1.63  2003/05/13 19:14:41  peter
    * failn removed
    * inherited result code check moven to pexpr

  Revision 1.62  2003/05/13 15:18:18  peter
    * generate code for procvar first before pushing parameters. Made
      the already existing code for powerpc available for all platforms

  Revision 1.61  2003/05/12 18:17:55  jonas
    * moved fpc_check_object call earlier for the ppc, so it can't destroy
      already-loaded parameter registers

  Revision 1.60  2003/05/11 21:48:38  jonas
    * fixed procvar bug on the ppc (load procvar before loading para's,
      because the procvar may otherwise destroy the already loaded paras)

  Revision 1.59  2003/05/09 17:47:02  peter
    * self moved to hidden parameter
    * removed hdisposen,hnewn,selfn

  Revision 1.58  2003/05/05 14:53:16  peter
    * vs_hidden replaced by is_hidden boolean

  Revision 1.57  2003/04/30 20:53:32  florian
    * error when address of an abstract method is taken
    * fixed some x86-64 problems
    * merged some more x86-64 and i386 code

  Revision 1.56  2003/04/29 07:28:52  michael
  + Patch from peter to fix wrong pushing of ansistring function results in open array

  Revision 1.55  2003/04/27 11:21:33  peter
    * aktprocdef renamed to current_procinfo.procdef
    * procinfo renamed to current_procinfo
    * procinfo will now be stored in current_module so it can be
      cleaned up properly
    * gen_main_procsym changed to create_main_proc and release_main_proc
      to also generate a tprocinfo structure
    * fixed unit implicit initfinal

  Revision 1.54  2003/04/27 07:29:50  peter
    * current_procinfo.procdef cleanup, current_procinfo.procdef is now always nil when parsing
      a new procdef declaration
    * aktprocsym removed
    * lexlevel removed, use symtable.symtablelevel instead
    * implicit init/final code uses the normal genentry/genexit
    * funcret state checking updated for new funcret handling

  Revision 1.53  2003/04/25 20:59:33  peter
    * removed funcretn,funcretsym, function result is now in varsym
      and aliases for result and function name are added using absolutesym
    * vs_hidden parameter for funcret passed in parameter
    * vs_hidden fixes
    * writenode changed to printnode and released from extdebug
    * -vp option added to generate a tree.log with the nodetree
    * nicer printnode for statements, callnode

  Revision 1.52  2003/04/25 08:25:26  daniel
    * Ifdefs around a lot of calls to cleartempgen
    * Fixed registers that are allocated but not freed in several nodes
    * Tweak to register allocator to cause less spills
    * 8-bit registers now interfere with esi,edi and ebp
      Compiler can now compile rtl successfully when using new register
      allocator

  Revision 1.51  2003/04/22 23:50:22  peter
    * firstpass uses expectloc
    * checks if there are differences between the expectloc and
      location.loc from secondpass in EXTDEBUG

  Revision 1.50  2003/04/22 14:33:38  peter
    * removed some notes/hints

  Revision 1.49  2003/04/22 13:47:08  peter
    * fixed C style array of const
    * fixed C array passing
    * fixed left to right with high parameters

  Revision 1.48  2003/04/22 10:09:34  daniel
    + Implemented the actual register allocator
    + Scratch registers unavailable when new register allocator used
    + maybe_save/maybe_restore unavailable when new register allocator used

  Revision 1.47  2003/04/22 09:49:44  peter
    * do not load self when calling a non-inherited class constructor

  Revision 1.46  2003/04/21 20:03:32  peter
    * forgot to copy vmtrefaddr to selfrefaddr when self=vmt

  Revision 1.45  2003/04/21 13:53:16  jonas
    - removed copying of all paras when secondpassing a callnode (this used
      to be necessary for inlinign support, but currently the whole inlined
      procedure is already copied in advance). Note that the compiler crashes
      when compiling ucomplex with -dTEST_INLINE (also after fixing the
      syntax errors), but that was also the case before this change.

  Revision 1.44  2003/04/10 17:57:52  peter
    * vs_hidden released

  Revision 1.43  2003/04/06 21:11:23  olle
    * changed newasmsymbol to newasmsymboldata for data symbols

  Revision 1.42  2003/04/04 15:38:56  peter
    * moved generic code from n386cal to ncgcal, i386 now also
      uses the generic ncgcal

  Revision 1.41  2003/03/28 19:16:56  peter
    * generic constructor working for i386
    * remove fixed self register
    * esi added as address register for i386

  Revision 1.40  2003/03/06 11:35:50  daniel
    * Fixed internalerror 7843 issue

  Revision 1.39  2003/02/19 22:00:14  daniel
    * Code generator converted to new register notation
    - Horribily outdated todo.txt removed

  Revision 1.38  2003/02/15 22:17:38  carl
   * bugfix of FPU emulation code

  Revision 1.37  2003/02/12 22:10:07  carl
    * load_frame_pointer is now generic
    * change fpu emulation routine names

  Revision 1.36  2003/01/30 21:46:57  peter
    * self fixes for static methods (merged)

  Revision 1.35  2003/01/22 20:45:15  mazen
  * making math code in RTL compiling.
  *NB : This does NOT mean necessary that it will generate correct code!

  Revision 1.34  2003/01/17 12:03:45  daniel
    * Optalign conditional code adapted to record Tregister

  Revision 1.33  2003/01/08 18:43:56  daniel
   * Tregister changed into a record

  Revision 1.32  2002/12/15 22:50:00  florian
    + some stuff for the new hidden parameter handling added

  Revision 1.31  2002/12/15 21:30:12  florian
    * tcallnode.paraitem introduced, all references to defcoll removed

  Revision 1.30  2002/11/27 20:04:39  peter
    * cdecl array of const fixes

  Revision 1.29  2002/11/25 17:43:17  peter
    * splitted defbase in defutil,symutil,defcmp
    * merged isconvertable and is_equal into compare_defs(_ext)
    * made operator search faster by walking the list only once

  Revision 1.28  2002/11/18 17:31:54  peter
    * pass proccalloption to ret_in_xxx and push_xxx functions

  Revision 1.27  2002/11/16 15:34:30  florian
    * generic location for float results

  Revision 1.26  2002/11/15 01:58:51  peter
    * merged changes from 1.0.7 up to 04-11
      - -V option for generating bug report tracing
      - more tracing for option parsing
      - errors for cdecl and high()
      - win32 import stabs
      - win32 records<=8 are returned in eax:edx (turned off by default)
      - heaptrc update
      - more info for temp management in .s file with EXTDEBUG

  Revision 1.25  2002/10/05 12:43:25  carl
    * fixes for Delphi 6 compilation
     (warning : Some features do not work under Delphi)

  Revision 1.24  2002/09/30 07:00:45  florian
    * fixes to common code to get the alpha compiler compiled applied

  Revision 1.23  2002/09/17 18:54:02  jonas
    * a_load_reg_reg() now has two size parameters: source and dest. This
      allows some optimizations on architectures that don't encode the
      register size in the register name.

  Revision 1.22  2002/09/07 15:25:02  peter
    * old logs removed and tabs fixed

  Revision 1.21  2002/09/07 11:50:02  jonas
    * fixed small regalloction info bug

  Revision 1.20  2002/09/02 11:25:20  florian
    * fixed generic procedure variable calling

  Revision 1.19  2002/09/01 21:04:48  florian
    * several powerpc related stuff fixed

  Revision 1.18  2002/09/01 18:43:27  peter
    * include FUNCTION_RETURN_REG in regs_to_push list

  Revision 1.17  2002/09/01 12:13:00  peter
    * use a_call_reg
    * ungetiftemp for procvar of object temp

  Revision 1.16  2002/08/25 19:25:18  peter
    * sym.insert_in_data removed
    * symtable.insertvardata/insertconstdata added
    * removed insert_in_data call from symtable.insert, it needs to be
      called separatly. This allows to deref the address calculation
    * procedures now calculate the parast addresses after the procedure
      directives are parsed. This fixes the cdecl parast problem
    * push_addr_param has an extra argument that specifies if cdecl is used
      or not

  Revision 1.15  2002/08/23 16:14:48  peter
    * tempgen cleanup
    * tt_noreuse temp type added that will be used in genentrycode

  Revision 1.14  2002/08/20 16:55:38  peter
    * don't write (stabs)line info when inlining a procedure

  Revision 1.13  2002/08/19 19:36:42  peter
    * More fixes for cross unit inlining, all tnodes are now implemented
    * Moved pocall_internconst to po_internconst because it is not a
      calling type at all and it conflicted when inlining of these small
      functions was requested

  Revision 1.12  2002/08/18 20:06:23  peter
    * inlining is now also allowed in interface
    * renamed write/load to ppuwrite/ppuload
    * tnode storing in ppu
    * nld,ncon,nbas are already updated for storing in ppu

  Revision 1.11  2002/08/17 22:09:44  florian
    * result type handling in tcgcal.pass_2 overhauled
    * better tnode.dowrite
    * some ppc stuff fixed

  Revision 1.10  2002/08/17 09:23:35  florian
    * first part of procinfo rewrite

  Revision 1.9  2002/08/13 21:40:55  florian
    * more fixes for ppc calling conventions

  Revision 1.8  2002/08/13 18:01:51  carl
    * rename swatoperands to swapoperands
    + m68k first compilable version (still needs a lot of testing):
        assembler generator, system information , inline
        assembler reader.

  Revision 1.7  2002/08/12 15:08:39  carl
    + stab register indexes for powerpc (moved from gdb to cpubase)
    + tprocessor enumeration moved to cpuinfo
    + linker in target_info is now a class
    * many many updates for m68k (will soon start to compile)
    - removed some ifdef or correct them for correct cpu

  Revision 1.6  2002/08/11 14:32:26  peter
    * renamed current_library to objectlibrary

  Revision 1.5  2002/08/11 13:24:11  peter
    * saving of asmsymbols in ppu supported
    * asmsymbollist global is removed and moved into a new class
      tasmlibrarydata that will hold the info of a .a file which
      corresponds with a single module. Added librarydata to tmodule
      to keep the library info stored for the module. In the future the
      objectfiles will also be stored to the tasmlibrarydata class
    * all getlabel/newasmsymbol and friends are moved to the new class

  Revision 1.4  2002/08/06 20:55:20  florian
    * first part of ppc calling conventions fix

  Revision 1.3  2002/07/20 11:57:53  florian
    * types.pas renamed to defbase.pas because D6 contains a types
      unit so this would conflicts if D6 programms are compiled
    + Willamette/SSE2 instructions to assembler added

  Revision 1.2  2002/07/13 19:38:43  florian
    * some more generic calling stuff fixed

}