freepascal.compiler/compiler/powerpc/cpubase.pas

{
    $Id$
    Copyright (c) 1998-2002 by Florian Klaempfl

    Contains the base types for the PowerPC

    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.

 ****************************************************************************
}
{ This Unit contains the base types for the PowerPC
}
unit cpubase;

{$i fpcdefs.inc}

interface

uses
  strings,cutils,cclasses,aasmbase,cpuinfo,cginfo;


{*****************************************************************************
                                Assembler Opcodes
*****************************************************************************}

    type
      TAsmOp=(A_None,
        { normal opcodes }
        a_add, a_add_, a_addo, a_addo_, a_addc, a_addc_, a_addco, a_addco_,
        a_adde, a_adde_, a_addeo, a_addeo_, a_addi, a_addic, a_addic_, a_addis,
        a_addme, a_addme_, a_addmeo, a_addmeo_, a_addze, a_addze_, a_addzeo,
        a_addzeo_, a_and, a_and_, a_andc, a_andc_, a_andi_, a_andis_, a_b,
        a_ba, a_bl, a_bla, a_bc, a_bca, a_bcl, a_bcla, a_bcctr, a_bcctrl, a_bclr,
        a_bclrl, a_cmp, a_cmpi, a_cmpl, a_cmpli, a_cntlzw, a_cntlzw_, a_crand,
        a_crandc, a_creqv, a_crnand, a_crnor, a_cror, a_crorc, a_crxor, a_dcba,
        a_dcbf, a_dcbi, a_dcbst, a_dcbt, a_divw, a_divw_, a_divwo, a_divwo_,
        a_divwu, a_divwu_, a_divwuo, a_divwuo_, a_eciwx, a_ecowx, a_eieio, a_eqv,
        a_eqv_, a_extsb, a_extsb_, a_extsh, a_extsh_, a_fabs, a_fabs_, a_fadd,
        a_fadd_, a_fadds, a_fadds_, a_fcmpo, a_fcmpu, a_fctiw, a_fctw_, a_fctwz,
        a_fctwz_, a_fdiv, a_fdiv_, a_fdivs, a_fdivs_, a_fmadd, a_fmadd_, a_fmadds,
        a_fmadds_, a_fmr, a_fmsub, a_fmsub_, a_fmsubs, a_fmsubs_, a_fmul, a_fmul_,
        a_fmuls, a_fmuls_, a_fnabs, a_fnabs_, a_fneg, a_fneg_, a_fnmadd,
        a_fnmadd_, a_fnmadds, a_fnmadds_, a_fnmsub, a_fnmsub_, a_fnmsubs,
        a_fnmsubs_, a_fres, a_fres_, a_frsp, a_frsp_, a_frsqrte, a_frsqrte_,
        a_fsel, a_fsel_, a_fsqrt, a_fsqrt_, a_fsqrts, a_fsqrts_, a_fsub, a_fsub_,
        a_fsubs, a_fsubs_, a_icbi, a_isync, a_lbz, a_lbzu, a_lbzux, a_lbzx,
        a_lfd, a_lfdu, a_lfdux, a_lfdx, a_lfs, a_lfsu, a_lfsux, a_lfsx, a_lha,
        a_lhau, a_lhaux, a_lhax, a_hbrx, a_lhz, a_lhzu, a_lhzux, a_lhzx, a_lmw,
        a_lswi, a_lswx, a_lwarx, a_lwbrx, a_lwz, a_lwzu, a_lwzux, a_lwzx, a_mcrf,
        a_mcrfs, a_mcrxr, a_lcrxe, a_mfcr, a_mffs, a_maffs_, a_mfmsr, a_mfspr, a_mfsr,
        a_mfsrin, a_mftb, a_mtfcrf, a_a_mtfd0, a_mtfsb1, a_mtfsf, a_mtfsf_,
        a_mtfsfi, a_mtfsfi_, a_mtmsr, a_mtspr, a_mtsr, a_mtsrin, a_mulhw,
        a_mulhw_, a_mulhwu, a_mulhwu_, a_mulli, a_mullw, a_mullw_, a_mullwo,
        a_mullwo_, a_nand, a_nand_, a_neg, a_neg_, a_nego, a_nego_, a_nor, a_nor_,
        a_or, a_or_, a_orc, a_orc_, a_ori, a_oris, a_rfi, a_rlwimi, a_rlwimi_,
        a_rlwinm, a_tlwinm_, a_rlwnm, a_sc, a_slw, a_slw_, a_sraw, a_sraw_,
        a_srawi, a_srawi_,a_srw, a_srw_, a_stb, a_stbu, a_stbux, a_stbx, a_stfd,
        a_stfdu, a_stfdux, a_stfdx, a_stfiwx, a_stfs, a_stfsu, a_stfsux, a_stfsx,
        a_sth, a_sthbrx, a_sthu, a_sthux, a_sthx, a_stmw, a_stswi, a_stswx, a_stw,
        a_stwbrx, a_stwx_, a_stwu, a_stwux, a_stwx, a_subf, a_subf_, a_subfo,
        a_subfo_, a_subfc, a_subfc_, a_subfco, a_subfco_, a_subfe, a_subfe_,
        a_subfeo, a_subfeo_, a_subfic, a_subfme, a_subfme_, a_subfmeo, a_subfmeo_,
        a_subfze, a_subfze_, a_subfzeo, a_subfzeo_, a_sync, a_tlbia, a_tlbie,
        a_tlbsync, a_tw, a_twi, a_xor, a_xor_, a_xori, a_xoris,
        { simplified mnemonics }
        a_subi, a_subis, a_subic, a_subic_, a_sub, a_sub_, a_subo, a_subo_,
        a_subc, a_subc_, a_subco, _subco_, a_cmpwi, a_cmpw, a_cmplwi, a_cmplw,
        a_extlwi, a_extlwi_, a_extrwi, a_extrwi_, a_inslwi, a_inslwi_, a_insrwi,
        a_insrwi_, a_rotlwi, a_rotlwi_, a_rotlw, a_rotlw_, a_slwi, a_slwi_,
        a_srwi, a_srwi_, a_clrlwi, a_clrlwi_, a_clrrwi, a_clrrwi_, a_clrslwi,
        a_clrslwi_, a_blr, a_bctr, a_blrl, a_bctrl, a_crset, a_crclr, a_crmove,
        a_crnot, a_mt {move to special prupose reg}, a_mf {move from special purpose reg},
        a_nop, a_li, a_lis, a_la, a_mr, a_mr_, a_not, a_mtcr);

      {# This should define the array of instructions as string }
      op2strtable=array[tasmop] of string[8];

    Const
      {# First value of opcode enumeration }
      firstop = low(tasmop);
      {# Last value of opcode enumeration  }
      lastop  = high(tasmop);

{*****************************************************************************
                                  Registers
*****************************************************************************}

    type
      tregister = (R_NO,
        R_0,R_1,R_2,R_3,R_4,R_5,R_6,R_7,R_8,R_9,R_10,R_11,R_12,R_13,R_14,R_15,R_16,
        R_17,R_18,R_19,R_20,R_21,R_22,R_23,R_24,R_25,R_26,R_27,R_28,R_29,R_30,R_31,
        R_F0,R_F1,R_F2,R_F3,R_F4,R_F5,R_F6,R_F7,R_F8,R_F9,R_F10,R_F11,R_F12,
        R_F13,R_F14,R_F15,R_F16,R_F17, R_F18,R_F19,R_F20,R_F21,R_F22, R_F23,R_F24,
        R_F25,R_F26,R_F27,R_F28,R_F29,R_F30,R_F31,
        R_M0,R_M1,R_M2,R_M3,R_M4,R_M5,R_M6,R_M7,R_M8,R_M9,R_M10,R_M11,R_M12,
        R_M13,R_M14,R_M15,R_M16,R_M17,R_M18,R_M19,R_M20,R_M21,R_M22, R_M23,R_M24,
        R_M25,R_M26,R_M27,R_M28,R_M29,R_M30,R_M31,
        R_CR,R_CR0,R_CR1,R_CR2,R_CR3,R_CR4,R_CR5,R_CR6,R_CR7,
        R_XER,R_LR,R_CTR,R_FPSCR
      );

      {# Set type definition for registers }
      tregisterset = set of tregister;

      { A type to store register locations for 64 Bit values. }
      tregister64 = packed record
        reglo,reghi : tregister;
      end;

      { alias for compact code }
      treg64 = tregister64;

      {# Type definition for the array of string of register nnames }
      reg2strtable = array[tregister] of string[5];

    Const
      {# First register in the tregister enumeration }
      firstreg = low(tregister);
      {# Last register in the tregister enumeration }
      lastreg  = high(tregister);

      R_SPR1 = R_XER;
      R_SPR8 = R_LR;
      R_SPR9 = R_CTR;
      R_TOC = R_2;
   {   CR0 = 0;
      CR1 = 4;
      CR2 = 8;
      CR3 = 12;
      CR4 = 16;
      CR5 = 20;
      CR6 = 24;
      CR7 = 28;
      LT = 0;
      GT = 1;
      EQ = 2;
      SO = 3;
      FX = 4;
      FEX = 5;
      VX = 6;
      OX = 7;}

      mot_reg2str : reg2strtable = ('',
        'r0','r1','r2','r3','r4','r5','r6','r7','r8','r9','r10','r11','r12','r13',
        'r14','r15','r16','r17','r18','r19','r20','r21','r22','r23','r24','r25',
        'r26','r27','r28','r29','r30','r31',
        'F0','F1','F2','F3','F4','F5','F6','F7', 'F8','F9','F10','F11','F12',
        'F13','F14','F15','F16','F17', 'F18','F19','F20','F21','F22', 'F23','F24',
        'F25','F26','F27','F28','F29','F30','F31',
        'M0','M1','M2','M3','M4','M5','M6','M7','M8','M9','M10','M11','M12',
        'M13','M14','M15','M16','M17','M18','M19','M20','M21','M22', 'M23','M24',
        'M25','M26','M27','M28','M29','M30','M31',
        'CR','CR0','CR1','CR2','CR3','CR4','CR5','CR6','CR7',
        'XER','LR','CTR','FPSCR'
      );

      std_reg2str : reg2strtable = ('',
        'r0','r1','r2','r3','r4','r5','r6','r7','r8','r9','r10','r11','r12','r13',
        'r14','r15','r16','r17','r18','r19','r20','r21','r22','r23','r24','r25',
        'r26','r27','r28','r29','r30','r31',
        'F0','F1','F2','F3','F4','F5','F6','F7', 'F8','F9','F10','F11','F12',
        'F13','F14','F15','F16','F17', 'F18','F19','F20','F21','F22', 'F23','F24',
        'F25','F26','F27','F28','F29','F30','F31',
        'M0','M1','M2','M3','M4','M5','M6','M7','M8','M9','M10','M11','M12',
        'M13','M14','M15','M16','M17','M18','M19','M20','M21','M22', 'M23','M24',
        'M25','M26','M27','M28','M29','M30','M31',
        'CR','CR0','CR1','CR2','CR3','CR4','CR5','CR6','CR7',
        'XER','LR','CTR','FPSCR'
      );

{*****************************************************************************
                                Conditions
*****************************************************************************}

    type
      TAsmCondFlag = (C_None { unconditional jumps },
        { conditions when not using ctr decrement etc }
        C_LT,C_LE,C_EQ,C_GE,C_GT,C_NL,C_NE,C_NG,C_SO,C_NS,C_UN,C_NU,
        { conditions when using ctr decrement etc }
        C_T,C_F,C_DNZ,C_DNZT,C_DNZF,C_DZ,C_DZT,C_DZF);

    const
      { these are in the XER, but when moved to CR_x they correspond with the }
      { bits below (still needs to be verified!!!)                            }
      C_OV = C_EQ;
      C_CA = C_GT;

    type
      TAsmCond = packed record
                   case simple: boolean of
                     false: (BO, BI: byte);
                     true: (
                       cond: TAsmCondFlag;
                       case byte of
                         0: ();
                         { specifies in which part of the cr the bit has to be }
                         { tested for blt,bgt,beq,..,bnu                       }
                         1: (cr: R_CR0..R_CR7);
                         { specifies the bit to test for bt,bf,bdz,..,bdzf }
                         2: (crbit: byte)
                       );
                 end;

    const
      AsmCondFlag2BO: Array[C_T..C_DZF] of Byte =
        (12,4,16,8,0,18,10,2);

      AsmCondFlag2BI: Array[C_LT..C_NU] of Byte =
        (0,1,2,0,1,0,2,1,3,3,3,3);

      AsmCondFlagTF: Array[TAsmCondFlag] of Boolean =
        (false,true,false,true,false,true,false,false,false,true,false,true,false,
         true,false,false,true,false,false,true,false);

      AsmCondFlag2Str: Array[TAsmCondFlag] of string[4] = ({cf_none}'',
        { conditions when not using ctr decrement etc}
        'lt','le','eq','ge','gt','nl','ne','ng','so','ns','un','nu',
        't','f','dnz','dzt','dnzf','dz','dzt','dzf');

    const
      CondAsmOps=3;
      CondAsmOp:array[0..CondAsmOps-1] of TasmOp=(
         A_BC, A_TW, A_TWI
      );

{*****************************************************************************
                                   Flags
*****************************************************************************}

    type
      TResFlagsEnum = (F_EQ,F_NE,F_LT,F_LE,F_GT,F_GE,F_SO,F_FX,F_FEX,F_VX,F_OX);
      TResFlags = record
        cr: R_CR0..R_CR7;
        flag: TResFlagsEnum;
      end;

    (*
    const
      { arrays for boolean location conversions }

      flag_2_cond : array[TResFlags] of TAsmCond =
         (C_E,C_NE,C_LT,C_LE,C_GT,C_GE,???????????????);
    *)

{*****************************************************************************
                                Reference
*****************************************************************************}

    type
      trefoptions=(ref_none,ref_parafixup,ref_localfixup,ref_selffixup);

      { since we have only 16 offsets, we need to be able to specify the high }
      { and low 16 bits of the address of a symbol                            }
      trefsymaddr = (refs_full,refs_ha,refs_l);

      { reference record }
      preference = ^treference;
      treference = packed record
         base,
         index       : tregister;
         offset      : longint;
         symbol      : tasmsymbol;
         symaddr     : trefsymaddr;
         offsetfixup : longint;
         options     : trefoptions;
         alignment   : byte;
      end;

      { reference record }
      pparareference = ^tparareference;
      tparareference = packed record
         index       : tregister;
         offset      : longint;
      end;

    const
      symaddr2str: array[trefsymaddr] of string[3] = ('','@ha','@l');

{*****************************************************************************
                                Operand
*****************************************************************************}

    type
      toptype=(top_none,top_reg,top_ref,top_const,top_symbol,top_bool);

      toper=record
        ot  : longint;
        case typ : toptype of
         top_none   : ();
         top_reg    : (reg:tregister);
         top_ref    : (ref:^treference);
         top_const  : (val:aword);
         top_symbol : (sym:tasmsymbol;symofs:longint);
         top_bool  :  (b: boolean);
      end;

{*****************************************************************************
                                Operand Sizes
*****************************************************************************}

{*****************************************************************************
                               Generic Location
*****************************************************************************}

    type
      TLoc=(
        LOC_INVALID,     { added for tracking problems}
        LOC_CONSTANT,    { ordinal constant }
        LOC_REGISTER,    { in a processor register }
        LOC_CREGISTER,   { Constant register which shouldn't be modified }
        LOC_FPUREGISTER, { FPU register}
        LOC_CFPUREGISTER,{ Constant FPU register which shouldn't be modified }
        LOC_MMREGISTER,  { multimedia register }
        LOC_CMMREGISTER, { Constant multimedia reg which shouldn't be modified }
        LOC_REFERENCE,   { in memory }
        LOC_CREFERENCE,  { in memory (constant) }
        LOC_JUMP,        { boolean results only, jump to false or true label }
        LOC_FLAGS        { boolean results only, flags are set }
      );

      { tparamlocation describes where a parameter for a procedure is stored.
        References are given from the caller's point of view. The usual
        TLocation isn't used, because contains a lot of unnessary fields.
      }
      tparalocation = packed record
         loc  : TLoc;
         sp_fixup : longint;
         case TLoc of
            LOC_REFERENCE : (reference : tparareference);
            { segment in reference at the same place as in loc_register }
            LOC_FPUREGISTER, LOC_CFPUREGISTER, LOC_MMREGISTER, LOC_CMMREGISTER,
              LOC_REGISTER,LOC_CREGISTER : (
              case longint of
                1 : (register,registerhigh : tregister);
                { overlay a registerlow }
                2 : (registerlow : tregister);
                { overlay a 64 Bit register type }
                3 : (reg64 : tregister64);
                4 : (register64 : tregister64);
              );
      end;

      tlocation = packed record
         size : TCGSize;
         loc : tloc;
         case tloc of
            LOC_CREFERENCE,LOC_REFERENCE : (reference : treference);
            LOC_CONSTANT : (
              case longint of
                1 : (value : AWord);
                2 : (valuelow, valuehigh:AWord);
                { overlay a complete 64 Bit value }
                3 : (valueqword : qword);
              );
            LOC_FPUREGISTER, LOC_CFPUREGISTER, LOC_MMREGISTER, LOC_CMMREGISTER,
              LOC_REGISTER,LOC_CREGISTER : (
                case longint of
                  1 : (registerlow,registerhigh : tregister);
                  2 : (register : tregister);
                  { overlay a 64 Bit register type }
                  3 : (reg64 : tregister64);
                  4 : (register64 : tregister64);
                );
            LOC_FLAGS : (resflags : tresflags);
      end;

{*****************************************************************************
                                 Constants
*****************************************************************************}

    const
      max_operands = 5;

      lvaluelocations = [LOC_REFERENCE, LOC_CREGISTER, LOC_CFPUREGISTER,
                         LOC_CMMREGISTER];

      {# Constant defining possibly all registers which might require saving }
{$warning FIX ME !!!!!!!!! }
      ALL_REGISTERS = [R_0..R_FPSCR];

      general_registers = [R_0..R_31];

      {# low and high of the available maximum width integer general purpose }
      { registers                                                            }
      LoGPReg = R_0;
      HiGPReg = R_31;

      {# low and high of every possible width general purpose register (same as }
      { above on most architctures apart from the 80x86)                        }
      LoReg = R_0;
      HiReg = R_31;

      {# Table of registers which can be allocated by the code generator
         internally, when generating the code.
      }
      { legend:                                                                }
      { xxxregs = set of all possibly used registers of that type in the code  }
      {           generator                                                    }
      { usableregsxxx = set of all 32bit components of registers that can be   }
      {           possible allocated to a regvar or using getregisterxxx (this }
      {           excludes registers which can be only used for parameter      }
      {           passing on ABI's that define this)                           }
      { c_countusableregsxxx = amount of registers in the usableregsxxx set    }

      maxintregs = 18;
      intregs    = [R_0..R_31];
      usableregsint = [R_13..R_27];
      c_countusableregsint = 18;

      maxfpuregs = 31-14+1;
      fpuregs    = [R_F0..R_F31];
      usableregsfpu = [R_F14..R_F31];
      c_countusableregsfpu = 31-14+1;

      mmregs     = [R_M0..R_M31];
      usableregsmm  = [R_M14..R_M31];
      c_countusableregsmm  = 31-14+1;

      firstsaveintreg = R_13;
      lastsaveintreg  = R_27;
      firstsavefpureg = R_F14;
      lastsavefpureg  = R_F31;
      { no altivec support yet. Need to override tcgobj.a_loadmm_* first in tcgppc }
      firstsavemmreg  = R_NO;
      lastsavemmreg   = R_NO;

      maxvarregs = 18;
      varregs : Array [1..maxvarregs] of Tregister =
                (R_13,R_14,R_15,R_16,R_17,R_18,R_19,R_20,R_21,R_22,R_23,R_24,R_25,
                 R_26,R_27,R_28,R_29,R_30);

      maxfpuvarregs = 31-14+1;
      fpuvarregs : Array [1..maxfpuvarregs] of Tregister =
                (R_F14,R_F15,R_F16,R_F17,R_F18,R_F19,R_F20,R_F21,R_F22,R_F23,
                 R_F24,R_F25,R_F26,R_F27,R_F28,R_F29,R_F30,R_F31);

      max_param_regs_int = 8;
      param_regs_int: Array[1..max_param_regs_int] of tregister =
        (R_3,R_4,R_5,R_6,R_7,R_8,R_9,R_10);

      max_param_regs_fpu = 13;
      param_regs_fpu: Array[1..max_param_regs_fpu] of tregister =
        (R_F1,R_F2,R_F3,R_F4,R_F5,R_F6,R_F7,R_F8,R_F9,R_F10,R_F11,R_F12,R_F13);

      max_param_regs_mm = 13;
      param_regs_mm: Array[1..max_param_regs_mm] of tregister =
        (R_M1,R_M2,R_M3,R_M4,R_M5,R_M6,R_M7,R_M8,R_M9,R_M10,R_M11,R_M12,R_M13);

      {# Registers which are defined as scratch and no need to save across
         routine calls or in assembler blocks.
      }
      max_scratch_regs = 3;
      scratch_regs: Array[1..max_scratch_regs] of TRegister = (R_28,R_29,R_30);

{*****************************************************************************
                          Default generic sizes
*****************************************************************************}

      {# Defines the default address size for a processor, }
      OS_ADDR = OS_32;
      {# the natural int size for a processor,             }
      OS_INT = OS_32;
      {# the maximum float size for a processor,           }
      OS_FLOAT = OS_F64;
      {# the size of a vector register for a processor     }
      OS_VECTOR = OS_M128;

{*****************************************************************************
                          Generic Register names
*****************************************************************************}

      {# Stack pointer register }
      stack_pointer_reg = R_1;
      {# Frame pointer register }
      frame_pointer_reg = stack_pointer_reg;
      {# Self pointer register : contains the instance address of an
         object or class. }
      self_pointer_reg  = R_9;
      {# Register for addressing absolute data in a position independant way,
         such as in PIC code. The exact meaning is ABI specific }
{$warning Needs checking, this is just a dummy (PFV) }
      pic_offset_reg = R_8;
      {# Results are returned in this register (32-bit values) }
      accumulator   = R_3;
      {# Hi-Results are returned in this register (64-bit value high register) }
      accumulatorhigh = R_4;
      { WARNING: don't change to R_ST0!! See comments above implementation of }
      { a_loadfpu* methods in rgcpu (JM)                                      }
{$warning I don't know the exact values, please check (PFV) }
      fpuresultreg = R_F0;
      mmresultreg = R_M0;

{*****************************************************************************
                       GCC /ABI linking information
*****************************************************************************}

      {# Registers which must be saved when calling a routine declared as
         cppdecl, cdecl, stdcall, safecall, palmossyscall. The registers
         saved should be the ones as defined in the target ABI and / or GCC.

         This value can be deduced from CALLED_USED_REGISTERS array in the
         GCC source.
      }
      std_saved_registers = [R_13..R_29];
      {# Required parameter alignment when calling a routine declared as
         stdcall and cdecl. The alignment value should be the one defined
         by GCC or the target ABI.

         The value of this constant is equal to the constant
         PARM_BOUNDARY / BITS_PER_UNIT in the GCC source.
      }
      std_param_align = 4;  { for 32-bit version only }

{*****************************************************************************
                            CPU Dependent Constants
*****************************************************************************}

      LinkageAreaSize = 24;
      { offset in the linkage area for the saved stack pointer }
      LA_SP = 0;
      { offset in the linkage area for the saved conditional register}
      LA_CR = 4;
      { offset in the linkage area for the saved link register}
      LA_LR = 8;
      { offset in the linkage area for the saved RTOC register}
      LA_RTOC = 20;

{*****************************************************************************
                                  Helpers
*****************************************************************************}

    function  is_calljmp(o:tasmop):boolean;

    procedure inverse_flags(var r : TResFlags);
    procedure inverse_cond(const c: TAsmCond;var r : TAsmCond);
    function  flags_to_cond(const f: TResFlags) : TAsmCond;
    procedure create_cond_imm(BO,BI:byte;var r : TAsmCond);
    procedure create_cond_norm(cond: TAsmCondFlag; cr: byte;var r : TasmCond);


implementation

    uses
      verbose;

{*****************************************************************************
                                  Helpers
*****************************************************************************}

    function is_calljmp(o:tasmop):boolean;
      begin
       is_calljmp:=false;
        case o of
          A_B,A_BA,A_BL,A_BLA,A_BC,A_BCA,A_BCL,A_BCLA,A_BCCTR,A_BCCTRL,A_BCLR,
            A_BCLRL,A_TW,A_TWI: is_calljmp:=true;
        end;
      end;

 
    procedure inverse_flags(var r: TResFlags);
      const
        inv_flags: array[F_EQ..F_GE] of TResFlagsEnum =
          (F_NE,F_EQ,F_GE,F_GE,F_LE,F_LT);
      begin
        r.flag := inv_flags[r.flag];
      end;


    procedure inverse_cond(const c: TAsmCond;var r : TAsmCond);
      const
        inv_condflags:array[TAsmCondFlag] of TAsmCondFlag=(C_None,
          C_GE,C_GT,C_NE,C_LT,C_LE,C_LT,C_EQ,C_GT,C_NS,C_SO,C_NU,C_UN,
          C_F,C_T,C_DNZ,C_DNZF,C_DNZT,C_DZ,C_DZF,C_DZT);
      begin
        r := c;
        r.cond := inv_condflags[c.cond];
      end;


    function flags_to_cond(const f: TResFlags) : TAsmCond;
      const
        flag_2_cond: array[F_EQ..F_SO] of TAsmCondFlag =
          (C_EQ,C_NE,C_LT,C_LE,C_GT,C_GE,C_SO);
      begin
        if f.flag > high(flag_2_cond) then
          internalerror(200112301);
        result.simple := true;
        result.cr := f.cr;
        result.cond := flag_2_cond[f.flag];
      end;


    procedure create_cond_imm(BO,BI:byte;var r : TAsmCond);
      begin
        r.simple := false;
        r.bo := bo;
        r.bi := bi;
      end;


    procedure create_cond_norm(cond: TAsmCondFlag; cr: byte;var r : TasmCond);
      const cr2reg: array[0..7] of tregister =
              (R_CR0,R_CR1,R_CR2,R_CR3,R_CR4,R_CR5,R_CR6,R_CR7);
      begin
        r.simple := true;
        r.cond := cond;
        case cond of
          C_NONE:;
          C_T..C_DZF: r.crbit := cr
          else r.cr := cr2reg[cr];
        end;
      end;

end.
{
  $Log$
  Revision 1.17  2002-07-11 07:35:36  jonas
    * some available registers fixes

  Revision 1.16  2002/07/09 19:45:01  jonas
    * unarynminus and shlshr node fixed for 32bit and smaller ordinals
    * small fixes in the assembler writer
    * changed scratch registers, because they were used by the linker (r11
      and r12) and by the abi under linux (r31)

  Revision 1.15  2002/07/07 09:44:31  florian
    * powerpc target fixed, very simple units can be compiled

  Revision 1.14  2002/05/18 13:34:26  peter
    * readded missing revisions

  Revision 1.12  2002/05/14 19:35:01  peter
    * removed old logs and updated copyright year

  Revision 1.11  2002/05/14 17:28:10  peter
    * synchronized cpubase between powerpc and i386
    * moved more tables from cpubase to cpuasm
    * tai_align_abstract moved to tainst, cpuasm must define
      the tai_align class now, which may be empty

  Revision 1.10  2002/05/13 19:52:46  peter
    * a ppcppc can be build again

  Revision 1.9  2002/04/21 15:48:39  carl
  * some small updates according to i386 version

  Revision 1.8  2002/04/20 21:41:51  carl
  * renamed some constants

  Revision 1.7  2002/04/06 18:13:02  jonas
    * several powerpc-related additions and fixes

}