pass_2.pas 18 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504
  1. {
  2. $Id$
  3. Copyright (c) 1998-2002 by Florian Klaempfl
  4. This unit handles the codegeneration pass
  5. This program is free software; you can redistribute it and/or modify
  6. it under the terms of the GNU General Public License as published by
  7. the Free Software Foundation; either version 2 of the License, or
  8. (at your option) any later version.
  9. This program is distributed in the hope that it will be useful,
  10. but WITHOUT ANY WARRANTY; without even the implied warranty of
  11. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  12. GNU General Public License for more details.
  13. You should have received a copy of the GNU General Public License
  14. along with this program; if not, write to the Free Software
  15. Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  16. ****************************************************************************
  17. }
  18. unit pass_2;
  19. {$i fpcdefs.inc}
  20. interface
  21. uses
  22. node;
  23. type
  24. tenumflowcontrol = (fc_exit,fc_break,fc_continue);
  25. tflowcontrol = set of tenumflowcontrol;
  26. var
  27. allow_multi_pass2 : boolean;
  28. flowcontrol : tflowcontrol;
  29. { produces assembler for the expression in variable p }
  30. { and produces an assembler node at the end }
  31. procedure generatecode(var p : tnode);
  32. { produces the actual code }
  33. function do_secondpass(var p : tnode) : boolean;
  34. procedure secondpass(var p : tnode);
  35. implementation
  36. uses
  37. {$ifdef EXTDEBUG}
  38. cutils,
  39. {$endif}
  40. globtype,systems,verbose,
  41. cclasses,globals,
  42. symconst,symbase,symtype,symsym,paramgr,
  43. aasmbase,aasmtai,
  44. pass_1,cpubase,cginfo,cgbase,
  45. {$ifdef EXTDEBUG}
  46. cgobj,
  47. {$endif EXTDEBUG}
  48. regvars,nflw,rgobj;
  49. {*****************************************************************************
  50. SecondPass
  51. *****************************************************************************}
  52. {$ifdef EXTDEBUG}
  53. procedure logsecond(ht:tnodetype; entry: boolean);
  54. const
  55. secondnames: array[tnodetype] of string[13] =
  56. ('<emptynode>',
  57. 'add-addn', {addn}
  58. 'add-muln', {muln}
  59. 'add-subn', {subn}
  60. 'moddiv-divn', {divn}
  61. 'add-symdifn', {symdifn}
  62. 'moddiv-modn', {modn}
  63. 'assignment', {assignn}
  64. 'load', {loadn}
  65. 'nothing-range', {range}
  66. 'add-ltn', {ltn}
  67. 'add-lten', {lten}
  68. 'add-gtn', {gtn}
  69. 'add-gten', {gten}
  70. 'add-equaln', {equaln}
  71. 'add-unequaln', {unequaln}
  72. 'in', {inn}
  73. 'add-orn', {orn}
  74. 'add-xorn', {xorn}
  75. 'shlshr-shrn', {shrn}
  76. 'shlshr-shln', {shln}
  77. 'add-slashn', {slashn}
  78. 'add-andn', {andn}
  79. 'subscriptn', {subscriptn}
  80. 'dderef', {derefn}
  81. 'addr', {addrn}
  82. 'doubleaddr', {doubleaddrn}
  83. 'ordconst', {ordconstn}
  84. 'typeconv', {typeconvn}
  85. 'calln', {calln}
  86. 'noth-callpar',{callparan}
  87. 'realconst', {realconstn}
  88. 'unaryminus', {unaryminusn}
  89. 'asm', {asmn}
  90. 'vecn', {vecn}
  91. 'pointerconst',{pointerconstn}
  92. 'stringconst', {stringconstn}
  93. 'not', {notn}
  94. 'inline', {inlinen}
  95. 'niln', {niln}
  96. 'error', {errorn}
  97. 'nothing-typen', {typen}
  98. 'setelement', {setelementn}
  99. 'setconst', {setconstn}
  100. 'blockn', {blockn}
  101. 'statement', {statementn}
  102. 'ifn', {ifn}
  103. 'breakn', {breakn}
  104. 'continuen', {continuen}
  105. 'while_repeat', {whilerepeatn}
  106. 'for', {forn}
  107. 'exitn', {exitn}
  108. 'with', {withn}
  109. 'case', {casen}
  110. 'label', {labeln}
  111. 'goto', {goton}
  112. 'tryexcept', {tryexceptn}
  113. 'raise', {raisen}
  114. 'tryfinally', {tryfinallyn}
  115. 'on', {onn}
  116. 'is', {isn}
  117. 'as', {asn}
  118. 'error-caret', {caretn}
  119. 'add-starstar', {starstarn}
  120. 'arrayconstruc', {arrayconstructn}
  121. 'noth-arrcnstr', {arrayconstructrangen}
  122. 'tempcreaten',
  123. 'temprefn',
  124. 'tempdeleten',
  125. 'addoptn',
  126. 'nothing-nothg', {nothingn}
  127. 'loadvmt', {loadvmtn}
  128. 'guidconstn',
  129. 'rttin'
  130. );
  131. var
  132. p: pchar;
  133. begin
  134. if entry then
  135. p := strpnew('second '+secondnames[ht]+' (entry)')
  136. else
  137. p := strpnew('second '+secondnames[ht]+' (exit)');
  138. exprasmlist.concat(tai_comment.create(p));
  139. end;
  140. {$endif EXTDEBUG}
  141. procedure secondpass(var p : tnode);
  142. var
  143. oldcodegenerror : boolean;
  144. oldlocalswitches : tlocalswitches;
  145. oldpos : tfileposinfo;
  146. {$ifdef TEMPREGDEBUG}
  147. prevp : pptree;
  148. {$endif TEMPREGDEBUG}
  149. {$ifdef EXTDEBUG}
  150. i : longint;
  151. {$endif EXTDEBUG}
  152. begin
  153. if not assigned(p) then
  154. internalerror(200208221);
  155. if not(nf_error in p.flags) then
  156. begin
  157. oldcodegenerror:=codegenerror;
  158. oldlocalswitches:=aktlocalswitches;
  159. oldpos:=aktfilepos;
  160. {$ifdef TEMPREGDEBUG}
  161. testregisters32;
  162. prevp:=curptree;
  163. curptree:=@p;
  164. p^.usableregs:=usablereg32;
  165. {$endif TEMPREGDEBUG}
  166. aktfilepos:=p.fileinfo;
  167. aktlocalswitches:=p.localswitches;
  168. codegenerror:=false;
  169. {$ifdef EXTDEBUG}
  170. if (p.expectloc=LOC_INVALID) then
  171. Comment(V_Warning,'ExpectLoc is not set before secondpass: '+nodetype2str[p.nodetype]);
  172. if (not allow_multi_pass2) and
  173. (p.location.loc<>LOC_INVALID) then
  174. Comment(V_Warning,'Location.Loc is already set before secondpass: '+nodetype2str[p.nodetype]);
  175. if (cs_asm_nodes in aktglobalswitches) then
  176. logsecond(p.nodetype,true);
  177. {$endif EXTDEBUG}
  178. p.pass_2;
  179. {$ifdef EXTDEBUG}
  180. if (cs_asm_nodes in aktglobalswitches) then
  181. logsecond(p.nodetype,false);
  182. if (not codegenerror) then
  183. begin
  184. if (p.location.loc=LOC_INVALID) then
  185. Comment(V_Warning,'Location not set in secondpass: '+nodetype2str[p.nodetype])
  186. else if (p.location.loc<>p.expectloc) then
  187. Comment(V_Warning,'Location is different in secondpass: '+nodetype2str[p.nodetype]);
  188. end;
  189. {$ifndef newra}
  190. { check if all scratch registers are freed }
  191. for i:=1 to max_scratch_regs do
  192. if not(scratch_regs[i] in cg.unusedscratchregisters) then
  193. begin
  194. printnode(stdout,p);
  195. internalerror(2003042201);
  196. end;
  197. {$endif newra}
  198. {$endif EXTDEBUG}
  199. if codegenerror then
  200. include(p.flags,nf_error);
  201. codegenerror:=codegenerror or oldcodegenerror;
  202. aktlocalswitches:=oldlocalswitches;
  203. aktfilepos:=oldpos;
  204. {$ifdef TEMPREGDEBUG}
  205. curptree:=prevp;
  206. {$endif TEMPREGDEBUG}
  207. {$ifdef EXTTEMPREGDEBUG}
  208. if p.usableregs-usablereg32>p.reallyusedregs then
  209. p.reallyusedregs:=p.usableregs-usablereg32;
  210. if p.reallyusedregs<p.registers32 then
  211. Comment(V_Debug,'registers32 overestimated '+tostr(p^.registers32)+
  212. '>'+tostr(p^.reallyusedregs));
  213. {$endif EXTTEMPREGDEBUG}
  214. end
  215. else
  216. codegenerror:=true;
  217. end;
  218. function do_secondpass(var p : tnode) : boolean;
  219. begin
  220. codegenerror:=false;
  221. if not(nf_error in p.flags) then
  222. secondpass(p);
  223. do_secondpass:=codegenerror;
  224. end;
  225. procedure clearrefs(p : tnamedindexitem;arg:pointer);
  226. begin
  227. if (tsym(p).typ=varsym) then
  228. if tvarsym(p).refs>1 then
  229. tvarsym(p).refs:=1;
  230. end;
  231. procedure generatecode(var p : tnode);
  232. begin
  233. rg.cleartempgen;
  234. flowcontrol:=[];
  235. { when size optimization only count occurrence }
  236. if cs_littlesize in aktglobalswitches then
  237. rg.t_times:=1
  238. else
  239. { reference for repetition is 100 }
  240. rg.t_times:=100;
  241. { clear register count }
  242. rg.clearregistercount;
  243. symtablestack.foreach_static({$ifdef FPCPROCVAR}@{$endif}clearrefs,nil);
  244. symtablestack.next.foreach_static({$ifdef FPCPROCVAR}@{$endif}clearrefs,nil);
  245. { firstpass everything }
  246. do_firstpass(p);
  247. { only do secondpass if there are no errors }
  248. if ErrorCount=0 then
  249. begin
  250. { assign parameter locations }
  251. {$ifndef i386}
  252. setparalocs(current_procinfo.procdef);
  253. {$endif i386}
  254. current_procinfo.after_pass1;
  255. { process register variable stuff (JM) }
  256. assign_regvars(p);
  257. // load_regvars(current_procinfo.aktentrycode,p);
  258. { for the i386 it must be done in genexitcode because it has }
  259. { to add 'fstp' instructions when using fpu regvars and those }
  260. { must come after the "exitlabel" (JM) }
  261. {$ifndef i386}
  262. // cleanup_regvars(current_procinfo.aktexitcode);
  263. {$endif i386}
  264. current_procinfo.allocate_framepointer;
  265. do_secondpass(p);
  266. if assigned(current_procinfo.procdef) then
  267. current_procinfo.procdef.fpu_used:=p.registersfpu;
  268. end;
  269. current_procinfo.aktproccode.concatlist(exprasmlist);
  270. end;
  271. end.
  272. {
  273. $Log$
  274. Revision 1.56 2003-06-12 16:43:07 peter
  275. * newra compiles for sparc
  276. Revision 1.55 2003/06/09 12:23:30 peter
  277. * init/final of procedure data splitted from genentrycode
  278. * use asmnode getposition to insert final at the correct position
  279. als for the implicit try...finally
  280. Revision 1.54 2003/06/03 13:01:59 daniel
  281. * Register allocator finished
  282. Revision 1.53 2003/05/26 21:17:17 peter
  283. * procinlinenode removed
  284. * aktexit2label removed, fast exit removed
  285. + tcallnode.inlined_pass_2 added
  286. Revision 1.52 2003/05/15 18:58:53 peter
  287. * removed selfpointer_offset, vmtpointer_offset
  288. * tvarsym.adjusted_address
  289. * address in localsymtable is now in the real direction
  290. * removed some obsolete globals
  291. Revision 1.51 2003/05/13 19:14:41 peter
  292. * failn removed
  293. * inherited result code check moven to pexpr
  294. Revision 1.50 2003/05/09 17:47:02 peter
  295. * self moved to hidden parameter
  296. * removed hdisposen,hnewn,selfn
  297. Revision 1.49 2003/04/27 11:21:33 peter
  298. * aktprocdef renamed to current_procdef
  299. * procinfo renamed to current_procinfo
  300. * procinfo will now be stored in current_module so it can be
  301. cleaned up properly
  302. * gen_main_procsym changed to create_main_proc and release_main_proc
  303. to also generate a tprocinfo structure
  304. * fixed unit implicit initfinal
  305. Revision 1.48 2003/04/27 07:29:50 peter
  306. * current_procdef cleanup, current_procdef is now always nil when parsing
  307. a new procdef declaration
  308. * aktprocsym removed
  309. * lexlevel removed, use symtable.symtablelevel instead
  310. * implicit init/final code uses the normal genentry/genexit
  311. * funcret state checking updated for new funcret handling
  312. Revision 1.47 2003/04/25 20:59:33 peter
  313. * removed funcretn,funcretsym, function result is now in varsym
  314. and aliases for result and function name are added using absolutesym
  315. * vs_hidden parameter for funcret passed in parameter
  316. * vs_hidden fixes
  317. * writenode changed to printnode and released from extdebug
  318. * -vp option added to generate a tree.log with the nodetree
  319. * nicer printnode for statements, callnode
  320. Revision 1.46 2003/04/23 10:12:14 peter
  321. * allow multi pass2 changed to global boolean instead of node flag
  322. Revision 1.45 2003/04/22 23:50:23 peter
  323. * firstpass uses expectloc
  324. * checks if there are differences between the expectloc and
  325. location.loc from secondpass in EXTDEBUG
  326. Revision 1.44 2003/04/22 12:45:58 florian
  327. * fixed generic in operator code
  328. + added debug code to check if all scratch registers are released
  329. Revision 1.43 2003/01/09 20:40:59 daniel
  330. * Converted some code in cgx86.pas to new register numbering
  331. Revision 1.42 2003/01/09 15:49:56 daniel
  332. * Added register conversion
  333. Revision 1.41 2002/12/22 14:35:39 peter
  334. * removed Writeln
  335. Revision 1.40 2002/12/21 23:21:47 mazen
  336. + added support for the shift nodes
  337. + added debug output on screen with -an command line option
  338. Revision 1.39 2002/08/23 16:14:49 peter
  339. * tempgen cleanup
  340. * tt_noreuse temp type added that will be used in genentrycode
  341. Revision 1.38 2002/08/20 16:55:38 peter
  342. * don't write (stabs)line info when inlining a procedure
  343. Revision 1.37 2002/08/19 19:36:44 peter
  344. * More fixes for cross unit inlining, all tnodes are now implemented
  345. * Moved pocall_internconst to po_internconst because it is not a
  346. calling type at all and it conflicted when inlining of these small
  347. functions was requested
  348. Revision 1.36 2002/08/18 20:06:24 peter
  349. * inlining is now also allowed in interface
  350. * renamed write/load to ppuwrite/ppuload
  351. * tnode storing in ppu
  352. * nld,ncon,nbas are already updated for storing in ppu
  353. Revision 1.35 2002/08/17 09:23:38 florian
  354. * first part of procinfo rewrite
  355. Revision 1.34 2002/08/15 19:10:35 peter
  356. * first things tai,tnode storing in ppu
  357. Revision 1.33 2002/07/30 20:50:44 florian
  358. * the code generator knows now if parameters are in registers
  359. Revision 1.32 2002/07/19 11:41:36 daniel
  360. * State tracker work
  361. * The whilen and repeatn are now completely unified into whilerepeatn. This
  362. allows the state tracker to change while nodes automatically into
  363. repeat nodes.
  364. * Resulttypepass improvements to the notn. 'not not a' is optimized away and
  365. 'not(a>b)' is optimized into 'a<=b'.
  366. * Resulttypepass improvements to the whilerepeatn. 'while not a' is optimized
  367. by removing the notn and later switchting the true and falselabels. The
  368. same is done with 'repeat until not a'.
  369. Revision 1.31 2002/07/01 18:46:25 peter
  370. * internal linker
  371. * reorganized aasm layer
  372. Revision 1.30 2002/05/18 13:34:11 peter
  373. * readded missing revisions
  374. Revision 1.29 2002/05/16 19:46:42 carl
  375. + defines.inc -> fpcdefs.inc to avoid conflicts if compiling by hand
  376. + try to fix temp allocation (still in ifdef)
  377. + generic constructor calls
  378. + start of tassembler / tmodulebase class cleanup
  379. Revision 1.27 2002/05/12 16:53:08 peter
  380. * moved entry and exitcode to ncgutil and cgobj
  381. * foreach gets extra argument for passing local data to the
  382. iterator function
  383. * -CR checks also class typecasts at runtime by changing them
  384. into as
  385. * fixed compiler to cycle with the -CR option
  386. * fixed stabs with elf writer, finally the global variables can
  387. be watched
  388. * removed a lot of routines from cga unit and replaced them by
  389. calls to cgobj
  390. * u32bit-s32bit updates for and,or,xor nodes. When one element is
  391. u32bit then the other is typecasted also to u32bit without giving
  392. a rangecheck warning/error.
  393. * fixed pascal calling method with reversing also the high tree in
  394. the parast, detected by tcalcst3 test
  395. Revision 1.26 2002/04/21 19:02:04 peter
  396. * removed newn and disposen nodes, the code is now directly
  397. inlined from pexpr
  398. * -an option that will write the secondpass nodes to the .s file, this
  399. requires EXTDEBUG define to actually write the info
  400. * fixed various internal errors and crashes due recent code changes
  401. Revision 1.25 2002/04/20 21:32:24 carl
  402. + generic FPC_CHECKPOINTER
  403. + first parameter offset in stack now portable
  404. * rename some constants
  405. + move some cpu stuff to other units
  406. - remove unused constents
  407. * fix stacksize for some targets
  408. * fix generic size problems which depend now on EXTEND_SIZE constant
  409. Revision 1.24 2002/04/07 13:30:13 carl
  410. - removed unused variable
  411. Revision 1.23 2002/04/02 17:11:29 peter
  412. * tlocation,treference update
  413. * LOC_CONSTANT added for better constant handling
  414. * secondadd splitted in multiple routines
  415. * location_force_reg added for loading a location to a register
  416. of a specified size
  417. * secondassignment parses now first the right and then the left node
  418. (this is compatible with Kylix). This saves a lot of push/pop especially
  419. with string operations
  420. * adapted some routines to use the new cg methods
  421. Revision 1.22 2002/03/31 20:26:35 jonas
  422. + a_loadfpu_* and a_loadmm_* methods in tcg
  423. * register allocation is now handled by a class and is mostly processor
  424. independent (+rgobj.pas and i386/rgcpu.pas)
  425. * temp allocation is now handled by a class (+tgobj.pas, -i386\tgcpu.pas)
  426. * some small improvements and fixes to the optimizer
  427. * some register allocation fixes
  428. * some fpuvaroffset fixes in the unary minus node
  429. * push/popusedregisters is now called rg.save/restoreusedregisters and
  430. (for i386) uses temps instead of push/pop's when using -Op3 (that code is
  431. also better optimizable)
  432. * fixed and optimized register saving/restoring for new/dispose nodes
  433. * LOC_FPU locations now also require their "register" field to be set to
  434. R_ST, not R_ST0 (the latter is used for LOC_CFPUREGISTER locations only)
  435. - list field removed of the tnode class because it's not used currently
  436. and can cause hard-to-find bugs
  437. }