freepascal.compiler/compiler/m68k/cgcpu.pas

{
    Copyright (c) 1998-2002 by the FPC team

    This unit implements the code generator for the 680x0

    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.

 ****************************************************************************
}
{$WARNINGS OFF}
unit cgcpu;

{$i fpcdefs.inc}

  interface

    uses
       cgbase,cgobj,globtype,
       aasmbase,aasmtai,aasmdata,aasmcpu,
       cpubase,cpuinfo,
       parabase,cpupara,
       node,symconst,symtype,symdef,
       cgutils,cg64f32;

    type
      tcg68k = class(tcg)
        procedure init_register_allocators;override;
        procedure done_register_allocators;override;

        procedure a_load_reg_cgpara(list : TAsmList;size : tcgsize;r : tregister;const cgpara : tcgpara);override;
        procedure a_load_const_cgpara(list : TAsmList;size : tcgsize;a : tcgint;const cgpara : tcgpara);override;
        procedure a_load_ref_cgpara(list : TAsmList;size : tcgsize;const r : treference;const cgpara : tcgpara);override;
        //procedure a_loadaddr_ref_cgpara(list : TAsmList;const r : treference;const cgpara : tcgpara);override;

        procedure a_call_name(list : TAsmList;const s : string; weak: boolean);override;
        procedure a_call_reg(list : TAsmList;reg : tregister);override;

        procedure a_load_const_reg(list : TAsmList;size : tcgsize;a : tcgint;register : tregister);override;
        procedure a_load_const_ref(list : TAsmList; tosize: tcgsize; a : tcgint;const ref : treference);override;

        procedure a_load_reg_ref(list : TAsmList;fromsize,tosize : tcgsize;register : tregister;const ref : treference);override;
        procedure a_load_reg_reg(list : TAsmList;fromsize,tosize : tcgsize;reg1,reg2 : tregister);override;
        procedure a_load_ref_reg(list : TAsmList;fromsize,tosize : tcgsize;const ref : treference;register : tregister);override;
        procedure a_load_ref_ref(list : TAsmList;fromsize,tosize : tcgsize;const sref : treference;const dref : treference);override;

        procedure a_loadaddr_ref_reg(list : TAsmList;const ref : treference;r : tregister);override;
        procedure a_loadfpu_reg_reg(list: TAsmList; fromsize, tosize: tcgsize; reg1, reg2: tregister); override;
        procedure a_loadfpu_ref_reg(list: TAsmList; fromsize, tosize: tcgsize; const ref: treference; reg: tregister); override;
        procedure a_loadfpu_reg_ref(list: TAsmList; fromsize, tosize: tcgsize; reg: tregister; const ref: treference); override;
        procedure a_loadfpu_ref_cgpara(list : TAsmList; size : tcgsize;const ref : treference;const cgpara : TCGPara);override;

        procedure a_loadmm_reg_reg(list: TAsmList;fromsize,tosize : tcgsize; reg1, reg2: tregister;shuffle : pmmshuffle); override;
        procedure a_loadmm_ref_reg(list: TAsmList;fromsize,tosize : tcgsize; const ref: treference; reg: tregister;shuffle : pmmshuffle); override;
        procedure a_loadmm_reg_ref(list: TAsmList;fromsize,tosize : tcgsize; reg: tregister; const ref: treference;shuffle : pmmshuffle); override;
        procedure a_loadmm_reg_cgpara(list: TAsmList; size: tcgsize; reg: tregister;const locpara : TCGPara;shuffle : pmmshuffle); override;

        procedure a_op_const_reg(list : TAsmList; Op: TOpCG; size: tcgsize; a: tcgint; reg: TRegister); override;
        procedure a_op_const_ref(list : TAsmList; Op: TOpCG; size: TCGSize; a: tcgint; const ref: TReference); override;
        procedure a_op_reg_reg(list : TAsmList; Op: TOpCG; size: TCGSize; reg1, reg2: TRegister); override;
        procedure a_op_reg_ref(list : TAsmList; Op: TOpCG; size: TCGSize; reg: TRegister; const ref: TReference); override;

        procedure a_cmp_const_reg_label(list : TAsmList;size : tcgsize;cmp_op : topcmp;a : tcgint;reg : tregister; l : tasmlabel);override;
        procedure a_cmp_reg_reg_label(list : TAsmList;size : tcgsize;cmp_op : topcmp;reg1,reg2 : tregister;l : tasmlabel); override;
        procedure a_jmp_name(list : TAsmList;const s : string); override;
        procedure a_jmp_always(list : TAsmList;l: tasmlabel); override;
        procedure a_jmp_flags(list : TAsmList;const f : TResFlags;l: tasmlabel); override;
        procedure g_flags2reg(list: TAsmList; size: TCgSize; const f: tresflags; reg: TRegister); override;

        procedure g_concatcopy(list : TAsmList;const source,dest : treference;len : tcgint);override;
        { generates overflow checking code for a node }
        procedure g_overflowcheck(list: TAsmList; const l:tlocation; def:tdef); override;

        procedure g_proc_entry(list : TAsmList;localsize : longint;nostackframe:boolean);override;
        procedure g_proc_exit(list : TAsmList;parasize:longint;nostackframe:boolean);override;

        procedure g_save_registers(list:TAsmList);override;
        procedure g_restore_registers(list:TAsmList);override;

        procedure g_adjust_self_value(list:TAsmList;procdef:tprocdef;ioffset:tcgint);override;
        procedure g_intf_wrapper(list: TAsmList; procdef: tprocdef; const labelname: string; ioffset: longint);override;

        { # Sign or zero extend the register to a full 32-bit value.
            The new value is left in the same register.
        }
        procedure sign_extend(list: TAsmList;_oldsize : tcgsize; reg: tregister);
        procedure sign_extend(list: TAsmList;_oldsize : tcgsize; _newsize : tcgsize; reg: tregister);

     protected
        function fixref(list: TAsmList; var ref: treference): boolean;

        procedure call_rtl_mul_const_reg(list:tasmlist;size:tcgsize;a:tcgint;reg:tregister;const name:string);
        procedure call_rtl_mul_reg_reg(list:tasmlist;reg1,reg2:tregister;const name:string);
     private

        procedure a_jmp_cond(list : TAsmList;cond : TOpCmp;l: tasmlabel);
        function force_to_dataregister(list: TAsmList; size: TCGSize; reg: TRegister): TRegister;
        procedure move_if_needed(list: TAsmList; size: TCGSize; src: TRegister; dest: TRegister);

     end;

     tcg64f68k = class(tcg64f32)
       procedure a_op64_reg_reg(list : TAsmList;op:TOpCG; size: tcgsize; regsrc,regdst : tregister64);override;
       procedure a_op64_const_reg(list : TAsmList;op:TOpCG; size: tcgsize; value : int64;regdst : tregister64);override;
     end;

     { This function returns true if the reference+offset is valid.
       Otherwise extra code must be generated to solve the reference.

       On the m68k, this verifies that the reference is valid
       (e.g : if index register is used, then the max displacement
        is 256 bytes, if only base is used, then max displacement
        is 32K
     }
     function isvalidrefoffset(const ref: treference): boolean;
     function isvalidreference(const ref: treference): boolean;

    procedure create_codegen;

  implementation

    uses
       globals,verbose,systems,cutils,
       symsym,symtable,defutil,paramgr,procinfo,
       rgobj,tgobj,rgcpu,fmodule;


    const
      { opcode table lookup }
      topcg2tasmop: Array[topcg] of tasmop =
      (
       A_NONE,
       A_MOVE,
       A_ADD,
       A_AND,
       A_DIVU,
       A_DIVS,
       A_MULS,
       A_MULU,
       A_NEG,
       A_NOT,
       A_OR,
       A_ASR,
       A_LSL,
       A_LSR,
       A_SUB,
       A_EOR,
       A_NONE,
       A_NONE
      );

      { opcode with extend bits table lookup, used by 64bit cg }
      topcg2tasmopx: Array[topcg] of tasmop =
      (
       A_NONE,
       A_NONE,
       A_ADDX,
       A_NONE,
       A_NONE,
       A_NONE,
       A_NONE,
       A_NONE,
       A_NEGX,
       A_NONE,
       A_NONE,
       A_NONE,
       A_NONE,
       A_NONE,
       A_SUBX,
       A_NONE,
       A_NONE,
       A_NONE
      );

      TOpCmp2AsmCond: Array[topcmp] of TAsmCond =
      (
       C_NONE,
       C_EQ,
       C_GT,
       C_LT,
       C_GE,
       C_LE,
       C_NE,
       C_LS,
       C_CS,
       C_CC,
       C_HI
      );

     function isvalidreference(const ref: treference): boolean;
       begin
         isvalidreference:=isvalidrefoffset(ref) and

           { don't try to generate addressing with symbol and base reg and offset
             it might fail in linking stage if the symbol is more than 32k away (KB) }
           not (assigned(ref.symbol) and (ref.base <> NR_NO) and (ref.offset <> 0)) and

           { coldfire and 68000 cannot handle non-addressregs as bases }
           not ((current_settings.cputype in cpu_coldfire+[cpu_mc68000]) and
                not isaddressregister(ref.base));
       end;

     function isvalidrefoffset(const ref: treference): boolean;
      begin
         isvalidrefoffset := true;
         if ref.index <> NR_NO then
           begin
//             if ref.base <> NR_NO then
//                internalerror(2002081401);
             if (ref.offset < low(shortint)) or (ref.offset > high(shortint)) then
                isvalidrefoffset := false
           end
         else
           begin
             if (ref.offset < low(smallint)) or (ref.offset > high(smallint)) then
                isvalidrefoffset := false;
           end;
      end;


{****************************************************************************}
{                               TCG68K                                       }
{****************************************************************************}


    function use_push(const cgpara:tcgpara):boolean;
      begin
        result:=(not paramanager.use_fixed_stack) and
                assigned(cgpara.location) and
                (cgpara.location^.loc=LOC_REFERENCE) and
                (cgpara.location^.reference.index=NR_STACK_POINTER_REG);
      end;


    procedure tcg68k.init_register_allocators;
      var
        reg: TSuperRegister;
        address_regs: array of TSuperRegister;
      begin
        inherited init_register_allocators;
        rg[R_INTREGISTER]:=trgcpu.create(R_INTREGISTER,R_SUBWHOLE,
          [RS_D0,RS_D1,RS_D2,RS_D3,RS_D4,RS_D5,RS_D6,RS_D7],
          first_int_imreg,[]);

        { set up the array of address registers to use }
        for reg:=RS_A0 to RS_A6 do
          begin
            { don't hardwire the frame pointer register, because it can vary between target OS }
            if assigned(current_procinfo) and (current_procinfo.framepointer = NR_FRAME_POINTER_REG)
               and (reg = RS_FRAME_POINTER_REG) then
              continue;
            setlength(address_regs,length(address_regs)+1);
            address_regs[length(address_regs)-1]:=reg;
          end;
        rg[R_ADDRESSREGISTER]:=trgcpu.create(R_ADDRESSREGISTER,R_SUBWHOLE,
          address_regs, first_addr_imreg, []);

        rg[R_FPUREGISTER]:=trgcpu.create(R_FPUREGISTER,R_SUBNONE,
          [RS_FP0,RS_FP1,RS_FP2,RS_FP3,RS_FP4,RS_FP5,RS_FP6,RS_FP7],
          first_fpu_imreg,[]);
      end;


    procedure tcg68k.done_register_allocators;
      begin
        rg[R_INTREGISTER].free;
        rg[R_FPUREGISTER].free;
        rg[R_ADDRESSREGISTER].free;
        inherited done_register_allocators;
      end;


    procedure tcg68k.a_load_reg_cgpara(list : TAsmList;size : tcgsize;r : tregister;const cgpara : tcgpara);
      var
        pushsize : tcgsize;
        ref : treference;
      begin
        { it's probably necessary to port this from x86 later, or provide an m68k solution (KB) }
{ TODO: FIX ME! check_register_size()}
        // check_register_size(size,r);
        if use_push(cgpara) then
          begin
            cgpara.check_simple_location;
            if tcgsize2size[cgpara.location^.size]>cgpara.alignment then
              pushsize:=cgpara.location^.size
            else
              pushsize:=int_cgsize(cgpara.alignment);

            reference_reset_base(ref, NR_STACK_POINTER_REG, 0, cgpara.alignment);
            ref.direction := dir_dec;
            list.concat(taicpu.op_reg_ref(A_MOVE,tcgsize2opsize[pushsize],makeregsize(list,r,pushsize),ref));
          end
        else
          inherited a_load_reg_cgpara(list,size,r,cgpara);
      end;


    procedure tcg68k.a_load_const_cgpara(list : TAsmList;size : tcgsize;a : tcgint;const cgpara : tcgpara);
      var
        pushsize : tcgsize;
        ref : treference;
      begin
        if use_push(cgpara) then
          begin
            cgpara.check_simple_location;
            if tcgsize2size[cgpara.location^.size]>cgpara.alignment then
              pushsize:=cgpara.location^.size
            else
              pushsize:=int_cgsize(cgpara.alignment);

            reference_reset_base(ref, NR_STACK_POINTER_REG, 0, cgpara.alignment);
            ref.direction := dir_dec;
            list.concat(taicpu.op_const_ref(A_MOVE,tcgsize2opsize[pushsize],a,ref));
          end
        else
          inherited a_load_const_cgpara(list,size,a,cgpara);
      end;


    procedure tcg68k.a_load_ref_cgpara(list : TAsmList;size : tcgsize;const r : treference;const cgpara : tcgpara);

        procedure pushdata(paraloc:pcgparalocation;ofs:tcgint);
        var
          pushsize : tcgsize;
          tmpreg   : tregister;
          href     : treference;
          ref      : treference;
        begin
          if not assigned(paraloc) then
            exit;
{ TODO: FIX ME!!! this also triggers location bug }
          {if (paraloc^.loc<>LOC_REFERENCE) or
             (paraloc^.reference.index<>NR_STACK_POINTER_REG) or
             (tcgsize2size[paraloc^.size]>sizeof(tcgint)) then
            internalerror(200501162);}

          { Pushes are needed in reverse order, add the size of the
            current location to the offset where to load from. This
            prevents wrong calculations for the last location when
            the size is not a power of 2 }
          if assigned(paraloc^.next) then
            pushdata(paraloc^.next,ofs+tcgsize2size[paraloc^.size]);
          { Push the data starting at ofs }
          href:=r;
          inc(href.offset,ofs);
          fixref(list,href);
          if tcgsize2size[paraloc^.size]>cgpara.alignment then
            pushsize:=paraloc^.size
          else
            pushsize:=int_cgsize(cgpara.alignment);

          reference_reset_base(ref, NR_STACK_POINTER_REG, 0, tcgsize2size[pushsize]);
          ref.direction := dir_dec;

          if tcgsize2size[paraloc^.size]<cgpara.alignment then
            begin
              tmpreg:=getintregister(list,pushsize);
              a_load_ref_reg(list,paraloc^.size,pushsize,href,tmpreg);
              list.concat(taicpu.op_reg_ref(A_MOVE,tcgsize2opsize[pushsize],tmpreg,ref));
            end
          else
              list.concat(taicpu.op_ref_ref(A_MOVE,tcgsize2opsize[pushsize],href,ref));
        end;

      var
        len : tcgint;
        href : treference;
      begin
        { cgpara.size=OS_NO requires a copy on the stack }
        if use_push(cgpara) then
          begin
            { Record copy? }
            if (cgpara.size in [OS_NO,OS_F64]) or (size=OS_NO) then
              begin
                cgpara.check_simple_location;
                len:=align(cgpara.intsize,cgpara.alignment);
                g_stackpointer_alloc(list,len);
                reference_reset_base(href,NR_STACK_POINTER_REG,0,cgpara.alignment);
                g_concatcopy(list,r,href,len);
              end
            else
              begin
                if tcgsize2size[cgpara.size]<>tcgsize2size[size] then
                  internalerror(200501161);
                { We need to push the data in reverse order,
                  therefor we use a recursive algorithm }
                pushdata(cgpara.location,0);
              end
          end
        else
          inherited a_load_ref_cgpara(list,size,r,cgpara);
      end;

{
    procedure tcg68k.a_loadaddr_ref_cgpara(list : TAsmList;const r : treference;const cgpara : tcgpara);
      var
        tmpreg : tregister;
        opsize : topsize;
      begin
        with r do
          begin
            { i suppose this is not required for m68k (KB) }
//            if (segment<>NR_NO) then
//              cgmessage(cg_e_cant_use_far_pointer_there);
            if not use_push(cgpara) then
              begin
                cgpara.check_simple_location;
                opsize:=tcgsize2opsize[OS_ADDR];
                if (segment=NR_NO) and (base=NR_NO) and (index=NR_NO) then
                  begin
                    if assigned(symbol) then
//                      list.concat(Taicpu.Op_sym_ofs(A_PUSH,opsize,symbol,offset))
                    else;
//                      list.concat(Taicpu.Op_const(A_PUSH,opsize,offset));
                  end
                else if (segment=NR_NO) and (base=NR_NO) and (index<>NR_NO) and
                        (offset=0) and (scalefactor=0) and (symbol=nil) then
//                  list.concat(Taicpu.Op_reg(A_PUSH,opsize,index))
                else if (segment=NR_NO) and (base<>NR_NO) and (index=NR_NO) and
                        (offset=0) and (symbol=nil) then
//                  list.concat(Taicpu.Op_reg(A_PUSH,opsize,base))
                else
                  begin
                    tmpreg:=getaddressregister(list);
                    a_loadaddr_ref_reg(list,r,tmpreg);
//                    list.concat(taicpu.op_reg(A_PUSH,opsize,tmpreg));
                  end;
              end
            else
              inherited a_loadaddr_ref_cgpara(list,r,cgpara);
          end;
      end;
}

    function tcg68k.fixref(list: TAsmList; var ref: treference): boolean;
       var
         hreg,idxreg : tregister;
         href : treference;
         instr : taicpu;
       begin
         result:=false;
         { The MC68020+ has extended
           addressing capabilities with a 32-bit
           displacement.
         }
         { first ensure that base is an address register }
         if ((ref.base<>NR_NO) and (ref.index<>NR_NO)) and
            (not isaddressregister(ref.base) and isaddressregister(ref.index)) and
            (ref.scalefactor < 2) then
           begin
             { if we have both base and index registers, but base is data and index
               is address, we can just swap them, as FPC always uses long index.
               but we can only do this, if the index has no scalefactor }
             hreg:=ref.base;
             ref.base:=ref.index;
             ref.index:=hreg;
             //list.concat(tai_comment.create(strpnew('fixref: base and index swapped')));
           end;

         if (not assigned (ref.symbol) and (current_settings.cputype<>cpu_MC68000)) and
            (ref.base<>NR_NO) and not isaddressregister(ref.base) then
           begin
             hreg:=getaddressregister(list);
             instr:=taicpu.op_reg_reg(A_MOVE,S_L,ref.base,hreg);
             add_move_instruction(instr);
             list.concat(instr);
             fixref:=true;
             ref.base:=hreg;
           end;
         if (current_settings.cputype=cpu_MC68020) then
           exit;
         { ToDo: check which constraints of Coldfire also apply to MC68000 }
         case current_settings.cputype of
           cpu_MC68000:
             begin
               if (ref.base<>NR_NO) then
                 begin
                   if (ref.index<>NR_NO) and assigned(ref.symbol) then
                     begin
                       hreg:=getaddressregister(list);
                       list.concat(taicpu.op_reg_reg(A_MOVE,S_L,ref.base,hreg));
                       list.concat(taicpu.op_reg_reg(A_ADD,S_L,ref.index,hreg));
                       ref.index:=NR_NO;
                       ref.base:=hreg;
                     end;
                   { base + reg }
                   if ref.index <> NR_NO then
                      begin
                         { base + reg + offset }
                         if (ref.offset < low(shortint)) or (ref.offset > high(shortint)) then
                           begin
                             hreg:=getaddressregister(list);
                             list.concat(taicpu.op_reg_reg(A_MOVE,S_L,ref.base,hreg));
                             list.concat(taicpu.op_const_reg(A_ADD,S_L,ref.offset,hreg));
                             fixref:=true;
                             ref.offset:=0;
                             ref.base:=hreg;
                             exit;
                           end;
                      end
                   else
                   { base + offset }
                   if (ref.offset < low(smallint)) or (ref.offset > high(smallint)) then
                     begin
                       hreg:=getaddressregister(list);
                       list.concat(taicpu.op_reg_reg(A_MOVE,S_L,ref.base,hreg));
                       list.concat(taicpu.op_const_reg(A_ADD,S_L,ref.offset,hreg));
                       fixref:=true;
                       ref.offset:=0;
                       ref.base:=hreg;
                       exit;
                     end;
                   if assigned(ref.symbol) then
                     begin
                       hreg:=getaddressregister(list);
                       idxreg:=ref.base;
                       ref.base:=NR_NO;
                       list.concat(taicpu.op_ref_reg(A_LEA,S_L,ref,hreg));
                       reference_reset_base(ref,hreg,0,ref.alignment);
                       fixref:=true;
                       ref.index:=idxreg;
                     end
                   else if not isaddressregister(ref.base) then
                     begin
                       hreg:=getaddressregister(list);
                       instr:=taicpu.op_reg_reg(A_MOVE,S_L,ref.base,hreg);
                       //add_move_instruction(instr);
                       list.concat(instr);
                       fixref:=true;
                       ref.base:=hreg;
                     end;
                 end
               else
                 { Note: symbol -> ref would be supported as long as ref does not
                         contain a offset or index... (maybe something for the
                         optimizer) }
                 if Assigned(ref.symbol) and (ref.index<>NR_NO) then
                   begin
                     hreg:=cg.getaddressregister(list);
                     idxreg:=ref.index;
                     ref.index:=NR_NO;
                     list.concat(taicpu.op_ref_reg(A_LEA,S_L,ref,hreg));
                     reference_reset_base(ref,hreg,0,ref.alignment);
                     ref.index:=idxreg;
                     fixref:=true;
                   end;
             end;
           cpu_isa_a,
           cpu_isa_a_p,
           cpu_isa_b,
           cpu_isa_c:
             begin
               if (ref.base<>NR_NO) then
                 begin
                   if assigned(ref.symbol) then
                     begin
                       hreg:=cg.getaddressregister(list);
                       reference_reset_symbol(href,ref.symbol,ref.offset,ref.alignment);
                       list.concat(taicpu.op_ref_reg(A_LEA,S_L,href,hreg));
                       if ref.index<>NR_NO then
                         begin
                           idxreg:=getaddressregister(list);
                           instr:=taicpu.op_reg_reg(A_MOVE,S_L,ref.base,idxreg);
                           //add_move_instruction(instr);
                           list.concat(instr);
                           list.concat(taicpu.op_reg_reg(A_ADD,S_L,ref.index,idxreg));
                           ref.index:=idxreg;
                         end
                       else
                         ref.index:=ref.base;
                       ref.base:=hreg;
                       ref.offset:=0;
                       ref.symbol:=nil;
                     end;
                   { once the above is verified to work the below code can be
                     removed }
                   {if assigned(ref.symbol) and (ref.index=NR_NO) then
                     begin
                       hreg:=cg.getaddressregister(list);
                       reference_reset_symbol(href,ref.symbol,0,ref.alignment);
                       list.concat(taicpu.op_ref_reg(A_LEA,S_L,href,hreg));
                       ref.index:=ref.base;
                       ref.base:=hreg;
                       ref.symbol:=nil;
                     end;
                   if (ref.index<>NR_NO) and assigned(ref.symbol) then
                     begin
                       hreg:=getaddressregister(list);
                       list.concat(taicpu.op_reg_reg(A_MOVE,S_L,ref.base,hreg));
                       list.concat(taicpu.op_reg_reg(A_ADD,S_L,ref.index,hreg));
                       ref.base:=hreg;
                       ref.index:=NR_NO;
                     end;}
                   {if (ref.index <> NR_NO) and assigned(ref.symbol) then
                      internalerror(2002081403);}
                   { base + reg }
                   if ref.index <> NR_NO then
                      begin
                         { base + reg + offset }
                         if (ref.offset < low(shortint)) or (ref.offset > high(shortint)) then
                           begin
                              hreg:=getaddressregister(list);
                              instr:=taicpu.op_reg_reg(A_MOVE,S_L,ref.base,hreg);
                              //add_move_instruction(instr);
                              list.concat(instr);
                              list.concat(taicpu.op_const_reg(A_ADD,S_L,ref.offset,hreg));
                              fixref:=true;
                              ref.base:=hreg;
                              ref.offset:=0;
                              exit;
                           end;
                      end
                   else
                   { base + offset }
                   if (ref.offset < low(smallint)) or (ref.offset > high(smallint)) then
                     begin
                       hreg:=getaddressregister(list);
                       instr:=taicpu.op_reg_reg(A_MOVE,S_L,ref.base,hreg);
                       //add_move_instruction(instr);
                       list.concat(instr);
                       list.concat(taicpu.op_const_reg(A_ADD,S_L,ref.offset,hreg));
                       fixref:=true;
                       ref.offset:=0;
                       ref.base:=hreg;
                       exit;
                     end;
                 end
               else
                 { Note: symbol -> ref would be supported as long as ref does not
                         contain a offset or index... (maybe something for the
                         optimizer) }
                 if Assigned(ref.symbol) {and (ref.index<>NR_NO)} then
                   begin
                     hreg:=cg.getaddressregister(list);
                     idxreg:=ref.index;
                     ref.index:=NR_NO;
                     list.concat(taicpu.op_ref_reg(A_LEA,S_L,ref,hreg));
                     reference_reset_base(ref,hreg,0,ref.alignment);
                     ref.index:=idxreg;
                     fixref:=true;
                   end;
             end;
         end;
       end;


    procedure tcg68k.call_rtl_mul_const_reg(list:tasmlist;size:tcgsize;a:tcgint;reg:tregister;const name:string);
      var
        paraloc1,paraloc2,paraloc3 : tcgpara;
        pd : tprocdef;
      begin
        pd:=search_system_proc(name);
        paraloc1.init;
        paraloc2.init;
        paraloc3.init;
        paramanager.getintparaloc(pd,1,paraloc1);
        paramanager.getintparaloc(pd,2,paraloc2);
        paramanager.getintparaloc(pd,3,paraloc3);
        a_load_const_cgpara(list,OS_8,0,paraloc3);
        a_load_const_cgpara(list,size,a,paraloc2);
        a_load_reg_cgpara(list,OS_32,reg,paraloc1);
        paramanager.freecgpara(list,paraloc3);
        paramanager.freecgpara(list,paraloc2);
        paramanager.freecgpara(list,paraloc1);
        alloccpuregisters(list,R_ADDRESSREGISTER,paramanager.get_volatile_registers_address(pocall_default));
        alloccpuregisters(list,R_INTREGISTER,paramanager.get_volatile_registers_int(pocall_default));
        a_call_name(list,name,false);
        dealloccpuregisters(list,R_INTREGISTER,paramanager.get_volatile_registers_int(pocall_default));
        dealloccpuregisters(list,R_ADDRESSREGISTER,paramanager.get_volatile_registers_address(pocall_default));
        cg.a_reg_alloc(list,NR_FUNCTION_RESULT_REG);
        cg.a_load_reg_reg(list,OS_32,OS_32,NR_FUNCTION_RESULT_REG,reg);
        paraloc3.done;
        paraloc2.done;
        paraloc1.done;
      end;


    procedure tcg68k.call_rtl_mul_reg_reg(list:tasmlist;reg1,reg2:tregister;const name:string);
      var
        paraloc1,paraloc2,paraloc3 : tcgpara;
        pd : tprocdef;
      begin
       pd:=search_system_proc(name);
        paraloc1.init;
        paraloc2.init;
        paraloc3.init;
        paramanager.getintparaloc(pd,1,paraloc1);
        paramanager.getintparaloc(pd,2,paraloc2);
        paramanager.getintparaloc(pd,3,paraloc3);
        a_load_const_cgpara(list,OS_8,0,paraloc3);
        a_load_reg_cgpara(list,OS_32,reg1,paraloc2);
        a_load_reg_cgpara(list,OS_32,reg2,paraloc1);
        paramanager.freecgpara(list,paraloc3);
        paramanager.freecgpara(list,paraloc2);
        paramanager.freecgpara(list,paraloc1);
        alloccpuregisters(list,R_INTREGISTER,paramanager.get_volatile_registers_int(pocall_default));
        alloccpuregisters(list,R_ADDRESSREGISTER,paramanager.get_volatile_registers_address(pocall_default));
        a_call_name(list,name,false);
        dealloccpuregisters(list,R_ADDRESSREGISTER,paramanager.get_volatile_registers_address(pocall_default));
        dealloccpuregisters(list,R_INTREGISTER,paramanager.get_volatile_registers_int(pocall_default));
        cg.a_reg_alloc(list,NR_FUNCTION_RESULT_REG);
        cg.a_load_reg_reg(list,OS_32,OS_32,NR_FUNCTION_RESULT_REG,reg2);
        paraloc3.done;
        paraloc2.done;
        paraloc1.done;
      end;


    procedure tcg68k.a_call_name(list : TAsmList;const s : string; weak: boolean);
      var
        sym: tasmsymbol;
      begin
        if not(weak) then
          sym:=current_asmdata.RefAsmSymbol(s)
        else
          sym:=current_asmdata.WeakRefAsmSymbol(s);

        list.concat(taicpu.op_sym(A_JSR,S_NO,current_asmdata.RefAsmSymbol(s)));
      end;


    procedure tcg68k.a_call_reg(list : TAsmList;reg: tregister);
      var
        tmpref : treference;
	tmpreg : tregister;
        instr : taicpu;
      begin
	if isaddressregister(reg) then
	  begin
	    { if we have an address register, we can jump to the address directly }
            reference_reset_base(tmpref,reg,0,4);
	  end
	else
	  begin
	    { if we have a data register, we need to move it to an address register first }
	    tmpreg:=getaddressregister(list);
            reference_reset_base(tmpref,tmpreg,0,4);
            instr:=taicpu.op_reg_reg(A_MOVE,S_L,reg,tmpreg);
            add_move_instruction(instr);
            list.concat(instr);
	  end;
	list.concat(taicpu.op_ref(A_JSR,S_NO,tmpref));
     end;



    procedure tcg68k.a_load_const_reg(list : TAsmList;size : tcgsize;a : tcgint;register : tregister);
      var
        opsize: topsize;
      begin
        opsize:=tcgsize2opsize[size];

        if isaddressregister(register) then
          begin
            { an m68k manual I have recommends SUB Ax,Ax to be used instead of CLR for address regs }
            if a = 0 then
              list.concat(taicpu.op_reg_reg(A_SUB,S_L,register,register))
            else
              { ISA B/C Coldfire has MOV3Q which can move -1 or 1..7 to any reg }
              if (current_settings.cputype in [cpu_isa_b,cpu_isa_c]) and 
                 ((longint(a) = -1) or ((longint(a) > 0) and (longint(a) < 8))) then
                list.concat(taicpu.op_const_reg(A_MOV3Q,S_L,longint(a),register))
              else
                { We don't have to specify the size here, the assembler will decide the size of
                  the operand it needs. If this ends up as a MOVEA.W, that will sign extend the
                  value in the dest. reg to full 32 bits (specific to Ax regs only) }
                list.concat(taicpu.op_const_reg(A_MOVEA,S_NO,longint(a),register));
          end
        else
        if a = 0 then
           list.concat(taicpu.op_reg(A_CLR,S_L,register))
        else
         begin
           if (longint(a) >= low(shortint)) and (longint(a) <= high(shortint)) then
              list.concat(taicpu.op_const_reg(A_MOVEQ,S_L,longint(a),register))
           else
             begin
               { ISA B/C Coldfire has sign extend/zero extend moves }
               if (current_settings.cputype in [cpu_isa_b,cpu_isa_c]) and 
                  (size in [OS_16, OS_8, OS_S16, OS_S8]) and 
                  ((longint(a) >= low(smallint)) and (longint(a) <= high(smallint))) then
                 begin
                   if size in [OS_16, OS_8] then
                     list.concat(taicpu.op_const_reg(A_MVZ,opsize,longint(a),register))
                   else
                     list.concat(taicpu.op_const_reg(A_MVS,opsize,longint(a),register));
                 end
               else
                 begin
                   { clear the register first, for unsigned and positive values, so
                     we don't need to zero extend after }
                   if (size in [OS_16,OS_8]) or
                      ((size in [OS_S16,OS_S8]) and (a > 0)) then
                     list.concat(taicpu.op_reg(A_CLR,S_L,register));
                   list.concat(taicpu.op_const_reg(A_MOVE,opsize,longint(a),register));
                   { only sign extend if we need to, zero extension is not necessary because the CLR.L above }
                   if (size in [OS_S16,OS_S8]) and (a < 0) then
                     sign_extend(list,size,register);
                 end;
             end;
         end;
      end;

    procedure tcg68k.a_load_const_ref(list : TAsmList; tosize: tcgsize; a : tcgint;const ref : treference);
      var
        hreg : tregister;
        href : treference;
      begin
        href:=ref;
        fixref(list,href);
        { for coldfire we need to go through a temporary register if we have a
          offset, index or symbol given }
        if (current_settings.cputype in cpu_coldfire) and
            (
              (href.offset<>0) or
              { TODO : check whether we really need this second condition }
              (href.index<>NR_NO) or
              assigned(href.symbol)
            ) then
          begin
            hreg:=getintregister(list,tosize);
            a_load_const_reg(list,tosize,a,hreg);
            list.concat(taicpu.op_reg_ref(A_MOVE,tcgsize2opsize[tosize],hreg,href));
          end
        else
          list.concat(taicpu.op_const_ref(A_MOVE,tcgsize2opsize[tosize],longint(a),href));
      end;


    procedure tcg68k.a_load_reg_ref(list : TAsmList;fromsize,tosize : tcgsize;register : tregister;const ref : treference);
      var
       href : treference;
        size : tcgsize;
      begin
        href := ref;
        fixref(list,href);
        if tcgsize2size[fromsize]<tcgsize2size[tosize] then
          size:=fromsize
        else
          size:=tosize;
        { move to destination reference }
        list.concat(taicpu.op_reg_ref(A_MOVE,TCGSize2OpSize[size],register,href));
      end;


    procedure tcg68k.a_load_ref_ref(list : TAsmList;fromsize,tosize : tcgsize;const sref : treference;const dref : treference);
      var
        aref: treference;
        bref: treference;
        tmpref : treference;
        dofix : boolean;
        hreg: TRegister;
      begin
        aref := sref;
        bref := dref;
        fixref(list,aref);
        fixref(list,bref);
        if TCGSize2OpSize[fromsize]<>TCGSize2OpSize[tosize] then
          begin
            { if we need to change the size then always use a temporary
              register }
            hreg:=getintregister(list,fromsize);
            list.concat(taicpu.op_ref_reg(A_MOVE,TCGSize2OpSize[fromsize],aref,hreg));
            sign_extend(list,fromsize,tosize,hreg);
            list.concat(taicpu.op_reg_ref(A_MOVE,TCGSize2OpSize[tosize],hreg,bref));
            exit;
          end;
        { Coldfire dislikes certain move combinations }
        if current_settings.cputype in cpu_coldfire then
          begin
            { TODO : move.b/w only allowed in newer coldfires... (ISA_B+) }

            dofix:=false;
            if { (d16,Ax) and (d8,Ax,Xi) }
                (
                  (aref.base<>NR_NO) and
                  (
                    (aref.index<>NR_NO) or
                    (aref.offset<>0)
                  )
                ) or
                { (xxx) }
                assigned(aref.symbol) then
              begin
                if aref.index<>NR_NO then
                  begin
                    dofix:={ (d16,Ax) and (d8,Ax,Xi) }
                           (
                             (bref.base<>NR_NO) and
                             (
                               (bref.index<>NR_NO) or
                               (bref.offset<>0)
                             )
                           ) or
                           { (xxx) }
                           assigned(bref.symbol);
                  end
                else
                  { offset <> 0, but no index }
                  begin
                    dofix:={ (d8,Ax,Xi) }
                           (
                             (bref.base<>NR_NO) and
                             (bref.index<>NR_NO)
                           ) or
                           { (xxx) }
                           assigned(bref.symbol);
                  end;
              end;

            if dofix then
              begin
                hreg:=getaddressregister(list);
                reference_reset_base(tmpref,hreg,0,0);
                list.concat(taicpu.op_ref_reg(A_LEA,S_L,aref,hreg));
                list.concat(taicpu.op_ref_ref(A_MOVE,TCGSize2OpSize[fromsize],tmpref,bref));
                exit;
              end;
          end;
        list.concat(taicpu.op_ref_ref(A_MOVE,TCGSize2OpSize[fromsize],aref,bref));
      end;


    procedure tcg68k.a_load_reg_reg(list : TAsmList;fromsize,tosize : tcgsize;reg1,reg2 : tregister);
      var
        instr : taicpu;
      begin
         { move to destination register }
         instr:=taicpu.op_reg_reg(A_MOVE,TCGSize2OpSize[fromsize],reg1,reg2);
         add_move_instruction(instr);
         list.concat(instr);
         sign_extend(list, fromsize, reg2);
      end;


    procedure tcg68k.a_load_ref_reg(list : TAsmList;fromsize,tosize : tcgsize;const ref : treference;register : tregister);
      var
       href : treference;
       size : tcgsize;
      begin
         href:=ref;
         fixref(list,href);
         if tcgsize2size[fromsize]<tcgsize2size[tosize] then
           size:=fromsize
         else
           size:=tosize;
         list.concat(taicpu.op_ref_reg(A_MOVE,TCGSize2OpSize[size],href,register));
         { extend the value in the register }
         sign_extend(list, fromsize, register);
      end;


    procedure tcg68k.a_loadaddr_ref_reg(list : TAsmList;const ref : treference;r : tregister);
     var
       href : treference;
//       p: pointer;
      begin
         { TODO: FIX ME!!! take a look on this mess again...}
//        if getregtype(r)=R_ADDRESSREGISTER then
//          begin
//            writeln('address reg?!?');
//            p:=nil; dword(p^):=0; {DEBUG CODE... :D )
//            internalerror(2002072901);
//          end;
        href:=ref;
        fixref(list, href);
        list.concat(taicpu.op_ref_reg(A_LEA,S_L,href,r));
      end;


    procedure tcg68k.a_loadfpu_reg_reg(list: TAsmList; fromsize, tosize: tcgsize; reg1, reg2: tregister);
      var
        instr : taicpu;
      begin
        { in emulation mode, only 32-bit single is supported }
        if (cs_fp_emulation in current_settings.moduleswitches) or (current_settings.fputype=fpu_soft) then
          instr:=taicpu.op_reg_reg(A_MOVE,S_L,reg1,reg2)
        else
          instr:=taicpu.op_reg_reg(A_FMOVE,tcgsize2opsize[tosize],reg1,reg2);
         add_move_instruction(instr);
         list.concat(instr);
      end;


    procedure tcg68k.a_loadfpu_ref_reg(list: TAsmList; fromsize, tosize: tcgsize; const ref: treference; reg: tregister);
     var
      opsize : topsize;
      href : treference;
      tmpreg : tregister;
      begin
        opsize := tcgsize2opsize[fromsize];
        { extended is not supported, since it is not available on Coldfire }
        if opsize = S_FX then
          internalerror(20020729);
        href := ref;
        fixref(list,href);
        { in emulation mode, only 32-bit single is supported }
        if (cs_fp_emulation in current_settings.moduleswitches) or (current_settings.fputype=fpu_soft) then
           list.concat(taicpu.op_ref_reg(A_MOVE,S_L,href,reg))
        else
           begin
             list.concat(taicpu.op_ref_reg(A_FMOVE,opsize,href,reg));
             if (tosize < fromsize) then
               a_loadfpu_reg_reg(list,fromsize,tosize,reg,reg);
           end;
      end;

    procedure tcg68k.a_loadfpu_reg_ref(list: TAsmList; fromsize,tosize: tcgsize; reg: tregister; const ref: treference);
      var
       opsize : topsize;
      begin
        opsize := tcgsize2opsize[tosize];
        { extended is not supported, since it is not available on Coldfire }
        if opsize = S_FX then
          internalerror(20020729);
        { in emulation mode, only 32-bit single is supported }
        if (cs_fp_emulation in current_settings.moduleswitches) or (current_settings.fputype=fpu_soft) then
          list.concat(taicpu.op_reg_ref(A_MOVE,S_L,reg, ref))
        else
          list.concat(taicpu.op_reg_ref(A_FMOVE,opsize,reg, ref));
      end;


    procedure tcg68k.a_loadfpu_ref_cgpara(list : TAsmList; size : tcgsize;const ref : treference;const cgpara : TCGPara);
      begin
        case cgpara.location^.loc of
          LOC_REFERENCE,LOC_CREFERENCE:
            begin
              case size of
                OS_F64:
                  cg64.a_load64_ref_cgpara(list,ref,cgpara);
                OS_F32:
                  a_load_ref_cgpara(list,size,ref,cgpara);
                else
                  internalerror(2013021201);
              end;
            end;
          else
            inherited a_loadfpu_ref_cgpara(list,size,ref,cgpara);
        end;
      end;


    procedure tcg68k.a_loadmm_reg_reg(list: TAsmList;fromsize,tosize : tcgsize; reg1, reg2: tregister;shuffle : pmmshuffle);
      begin
        internalerror(20020729);
      end;


    procedure tcg68k.a_loadmm_ref_reg(list: TAsmList;fromsize,tosize : tcgsize; const ref: treference; reg: tregister;shuffle : pmmshuffle);
      begin
        internalerror(20020729);
      end;


    procedure tcg68k.a_loadmm_reg_ref(list: TAsmList;fromsize,tosize : tcgsize; reg: tregister; const ref: treference;shuffle : pmmshuffle);
      begin
        internalerror(20020729);
      end;


    procedure tcg68k.a_loadmm_reg_cgpara(list: TAsmList; size: tcgsize; reg: tregister;const locpara : TCGPara;shuffle : pmmshuffle);
      begin
        internalerror(20020729);
      end;


    procedure tcg68k.a_op_const_reg(list : TAsmList; Op: TOpCG; size: tcgsize; a: tcgint; reg: TRegister);
      var
       scratch_reg : tregister;
       scratch_reg2: tregister;
       opcode : tasmop;
       r,r2 : Tregister;
       instr : taicpu;
       paraloc1,paraloc2,paraloc3 : tcgpara;
      begin
        optimize_op_const(size, op, a);
        opcode := topcg2tasmop[op];
        case op of
          OP_NONE :
            begin
              { Opcode is optimized away }
            end;
          OP_MOVE :
            begin
              { Optimized, replaced with a simple load }
              a_load_const_reg(list,size,a,reg);
            end;
          OP_ADD,
          OP_SUB:
              begin
                { add/sub works the same way, so have it unified here }
                if (a >= 1) and (a <= 8) then
                  if (op = OP_ADD) then
                    opcode:=A_ADDQ
                  else
                    opcode:=A_SUBQ;
                list.concat(taicpu.op_const_reg(opcode, S_L, a, reg));
              end;
          OP_AND,
          OP_OR,
          OP_XOR:
              begin
                scratch_reg := force_to_dataregister(list, size, reg);
                list.concat(taicpu.op_const_reg(opcode, S_L, a, scratch_reg));
                move_if_needed(list, size, scratch_reg, reg);
              end;
          OP_DIV,
          OP_IDIV:
              begin
                 internalerror(20020816);
              end;
          OP_MUL,
          OP_IMUL:
              begin
                { NOTE: better have this as fast as possible on every CPU in all cases,
                        because the compiler uses OP_IMUL for array indexing... (KB) }
                { ColdFire doesn't support MULS/MULU <imm>,dX }
                if current_settings.cputype in cpu_coldfire then
                  begin
                    { move const to a register first }
                    scratch_reg := getintregister(list,OS_INT);
                    a_load_const_reg(list, size, a, scratch_reg);

                    { do the multiplication }
                    scratch_reg2 := force_to_dataregister(list, size, reg);
                    sign_extend(list, size, scratch_reg2);
                    list.concat(taicpu.op_reg_reg(opcode,S_L,scratch_reg,scratch_reg2));

                    { move the value back to the original register }
                    move_if_needed(list, size, scratch_reg2, reg);
                  end
                else
                  begin
                    if current_settings.cputype = cpu_mc68020 then
                      begin
                        { do the multiplication }
                        scratch_reg := force_to_dataregister(list, size, reg);
                        sign_extend(list, size, scratch_reg);
                        list.concat(taicpu.op_const_reg(opcode,S_L,a,scratch_reg));

                        { move the value back to the original register }
                        move_if_needed(list, size, scratch_reg, reg);
                      end
                    else
                      { Fallback branch, plain 68000 for now }
                      { FIX ME: this is slow as hell, but original 68000 doesn't have 32x32 -> 32bit MUL (KB) }
                      if op = OP_MUL then
                        call_rtl_mul_const_reg(list, size, a, reg,'fpc_mul_dword')
                      else
                        call_rtl_mul_const_reg(list, size, a, reg,'fpc_mul_longint');
                  end;
              end;
          OP_SAR,
          OP_SHL,
          OP_SHR :
              begin
                scratch_reg := force_to_dataregister(list, size, reg);
                sign_extend(list, size, scratch_reg);
                if (a >= 1) and (a <= 8) then
                  begin
                    list.concat(taicpu.op_const_reg(opcode, S_L, a, scratch_reg));
                  end
                else
                  begin
                    { move const to a register first }
                    scratch_reg2 := getintregister(list,OS_INT);
                    a_load_const_reg(list, size, a, scratch_reg2);

                    { do the operation }
                    list.concat(taicpu.op_reg_reg(opcode, S_L, scratch_reg2, scratch_reg));
                  end;
                { move the value back to the original register }
                move_if_needed(list, size, scratch_reg, reg);
              end;
        else
            internalerror(20020729);
         end;
      end;


    procedure tcg68k.a_op_const_ref(list : TAsmList; Op: TOpCG; size: TCGSize; a: tcgint; const ref: TReference);
      var
        opcode: tasmop;
        opsize: topsize;
        href  : treference;
      begin
        optimize_op_const(size, op, a);
        opcode := topcg2tasmop[op];
        opsize := TCGSize2OpSize[size];

        { on ColdFire all arithmetic operations are only possible on 32bit }
        if ((current_settings.cputype in cpu_coldfire) and (opsize <> S_L)
           and not (op in [OP_NONE,OP_MOVE])) then
          begin
            inherited;
            exit;
          end;

        case op of
          OP_NONE :
            begin
              { opcode was optimized away }
            end;
          OP_MOVE :
            begin
              { Optimized, replaced with a simple load }
              a_load_const_ref(list,size,a,ref);
            end;
          OP_ADD,
          OP_SUB :
            begin
              href:=ref;
              fixref(list,href);
              { add/sub works the same way, so have it unified here }
              if (a >= 1) and (a <= 8) then
                begin
                  if (op = OP_ADD) then
                    opcode:=A_ADDQ
                  else
                    opcode:=A_SUBQ;
                  list.concat(taicpu.op_const_ref(opcode, opsize, a, href));
                end
              else
                if not(current_settings.cputype in cpu_coldfire) then
                  list.concat(taicpu.op_const_ref(opcode, opsize, a, href))
                else
                  { on ColdFire, ADDI/SUBI cannot act on memory
                    so we can only go through a register }
                  inherited;
            end;
          else begin
//            list.concat(tai_comment.create(strpnew('a_op_const_ref inherited')));
            inherited;
          end;
        end;
      end;

    procedure tcg68k.a_op_reg_reg(list : TAsmList; Op: TOpCG; size: TCGSize; reg1, reg2: TRegister);
      var
        hreg1, hreg2,r,r2: tregister;
        instr : taicpu;
        opcode : tasmop;
        opsize : topsize;
      begin
        opcode := topcg2tasmop[op];
        if current_settings.cputype in cpu_coldfire then
          opsize := S_L
        else
          opsize := TCGSize2OpSize[size];

        case op of
          OP_ADD,
          OP_SUB:
              begin
                if current_settings.cputype in cpu_coldfire then
                  begin
                    { operation only allowed only a longword }
                    sign_extend(list, size, reg1);
                    sign_extend(list, size, reg2);
                  end;
                list.concat(taicpu.op_reg_reg(opcode, opsize, reg1, reg2));
              end;
          OP_AND,OP_OR,
          OP_SAR,OP_SHL,
          OP_SHR,OP_XOR:
              begin
                { load to data registers }
                hreg1 := force_to_dataregister(list, size, reg1);
                hreg2 := force_to_dataregister(list, size, reg2);

                if current_settings.cputype in cpu_coldfire then
                  begin
                    { operation only allowed only a longword }
                    {!***************************************
                      in the case of shifts, the value to
                      shift by, should already be valid, so
                      no need to sign extend the value
                     !
                    }
                    if op in [OP_AND,OP_OR,OP_XOR] then
                      sign_extend(list, size, hreg1);
                    sign_extend(list, size, hreg2);
                  end;
                list.concat(taicpu.op_reg_reg(opcode, opsize, hreg1, hreg2));

                { move back result into destination register }
                move_if_needed(list, size, hreg2, reg2);
              end;
          OP_DIV,
          OP_IDIV :
              begin
                internalerror(20020816);
              end;
          OP_MUL,
          OP_IMUL:
              begin
                if (current_settings.cputype <> cpu_mc68020) and
                   (not (current_settings.cputype in cpu_coldfire)) then
                  if op = OP_MUL then
                    call_rtl_mul_reg_reg(list,reg1,reg2,'fpc_mul_dword')
                  else
                    call_rtl_mul_reg_reg(list,reg1,reg2,'fpc_mul_longint')
                else
                  begin
                    { 68020+ and ColdFire codepath, probably could be improved }
                    hreg1 := force_to_dataregister(list, size, reg1);
                    hreg2 := force_to_dataregister(list, size, reg2);

                    sign_extend(list, size, hreg1);
                    sign_extend(list, size, hreg2);

                    list.concat(taicpu.op_reg_reg(opcode, opsize, hreg1, hreg2));

                    { move back result into destination register }
                    move_if_needed(list, size, hreg2, reg2);
                  end;
              end;
          OP_NEG,
          OP_NOT :
              begin
                { if there are two operands, move the register,
                  since the operation will only be done on the result
                  register. }
                if reg1 <> NR_NO then
                  hreg1:=reg1
                else
                  hreg1:=reg2;

                hreg2 := force_to_dataregister(list, size, hreg1);

                { coldfire only supports long version }
                if current_settings.cputype in cpu_ColdFire then
                  sign_extend(list, size, hreg2);

                list.concat(taicpu.op_reg(opcode, opsize, hreg2));

                { move back the result to the result register if needed }
                move_if_needed(list, size, hreg2, reg2);
              end;
        else
            internalerror(20020729);
         end;
      end;


    procedure tcg68k.a_op_reg_ref(list : TAsmList; Op: TOpCG; size: TCGSize; reg: TRegister; const ref: TReference);
      var
        opcode : tasmop;
        opsize : topsize;
        href   : treference;
      begin
        opcode := topcg2tasmop[op];
        opsize := TCGSize2OpSize[size];

        { on ColdFire all arithmetic operations are only possible on 32bit 
          and addressing modes are limited }
        if ((current_settings.cputype in cpu_coldfire) and (opsize <> S_L)) then
          begin
            inherited;
            exit;
          end;

        case op of
          OP_ADD,
          OP_SUB :
            begin
              href:=ref;
              fixref(list,href);
              { add/sub works the same way, so have it unified here }
              list.concat(taicpu.op_reg_ref(opcode, opsize, reg, href));
            end;
          else begin
//            list.concat(tai_comment.create(strpnew('a_op_reg_ref inherited')));
            inherited;
          end;
        end;
      end;

    procedure tcg68k.a_cmp_const_reg_label(list : TAsmList;size : tcgsize;cmp_op : topcmp;a : tcgint;reg : tregister;
            l : tasmlabel);
      var
        hregister : tregister;
        instr : taicpu;
        need_temp_reg : boolean;
        temp_size: topsize;
      begin
        need_temp_reg := false;

        { plain 68000 doesn't support address registers for TST }
        need_temp_reg := (current_settings.cputype = cpu_mc68000) and
          (a = 0) and isaddressregister(reg);

        { ColdFire doesn't support address registers for CMPI }
        need_temp_reg := need_temp_reg or ((current_settings.cputype in cpu_coldfire)
          and (a <> 0) and isaddressregister(reg));

        if need_temp_reg then
          begin
            hregister := getintregister(list,OS_INT);
            temp_size := TCGSize2OpSize[size];
            if temp_size < S_W then
              temp_size := S_W;
            instr:=taicpu.op_reg_reg(A_MOVE,temp_size,reg,hregister);
            add_move_instruction(instr);
            list.concat(instr);
            reg := hregister;

            { do sign extension if size had to be modified }
            if temp_size <> TCGSize2OpSize[size] then
              begin
                sign_extend(list, size, reg);
                size:=OS_INT;
              end;
          end;

        if a = 0 then
          list.concat(taicpu.op_reg(A_TST,TCGSize2OpSize[size],reg))
        else 
          begin
            { ColdFire ISA A also needs S_L for CMPI }
            { Note: older QEMU pukes from CMPI sizes <> .L even on ISA B/C, but
              it's actually *LEGAL*, see CFPRM, page 4-30, the bug also seems
              fixed in recent QEMU, but only when CPU cfv4e is forced, not by
              default. (KB) }
            if current_settings.cputype in cpu_coldfire{-[cpu_isa_b,cpu_isa_c]} then
              begin
                sign_extend(list, size, reg);
                size:=OS_INT;
              end;
            list.concat(taicpu.op_const_reg(A_CMPI,TCGSize2OpSize[size],a,reg));
          end;

         { emit the actual jump to the label }
         a_jmp_cond(list,cmp_op,l);
      end;

    procedure tcg68k.a_cmp_reg_reg_label(list : TAsmList;size : tcgsize;cmp_op : topcmp;reg1,reg2 : tregister;l : tasmlabel);
      begin
         list.concat(taicpu.op_reg_reg(A_CMP,tcgsize2opsize[size],reg1,reg2));
         { emit the actual jump to the label }
         a_jmp_cond(list,cmp_op,l);
      end;

    procedure tcg68k.a_jmp_name(list: TAsmList; const s: string);
      var
       ai: taicpu;
      begin
         ai := Taicpu.op_sym(A_JMP,S_NO,current_asmdata.RefAsmSymbol(s));
         ai.is_jmp := true;
         list.concat(ai);
      end;

    procedure tcg68k.a_jmp_always(list : TAsmList;l: tasmlabel);
      var
       ai: taicpu;
      begin
         ai := Taicpu.op_sym(A_JMP,S_NO,l);
         ai.is_jmp := true;
         list.concat(ai);
      end;

    procedure tcg68k.a_jmp_flags(list : TAsmList;const f : TResFlags;l: tasmlabel);
       var
         ai : taicpu;
       begin
         ai := Taicpu.op_sym(A_BXX,S_NO,l);
         ai.SetCondition(flags_to_cond(f));
         ai.is_jmp := true;
         list.concat(ai);
       end;

    procedure tcg68k.g_flags2reg(list: TAsmList; size: TCgSize; const f: tresflags; reg: TRegister);
       var
         ai : taicpu;
         hreg : tregister;
         instr : taicpu;
       begin
          { move to a Dx register? }
          if (isaddressregister(reg)) then
            hreg:=getintregister(list,OS_INT)
          else
            hreg:=reg;

          ai:=Taicpu.Op_reg(A_Sxx,S_B,hreg);
          ai.SetCondition(flags_to_cond(f));
          list.concat(ai);

          { Scc stores a complete byte of 1s, but the compiler expects only one
            bit set, so ensure this is the case }
          list.concat(taicpu.op_const_reg(A_AND,S_L,1,hreg));

          if hreg<>reg then
            begin
              instr:=taicpu.op_reg_reg(A_MOVE,S_L,hreg,reg);
              add_move_instruction(instr);
              list.concat(instr);
            end;
       end;



    procedure tcg68k.g_concatcopy(list : TAsmList;const source,dest : treference;len : tcgint);

     var
         helpsize : longint;
         i : byte;
         reg8,reg32 : tregister;
         swap : boolean;
         hregister : tregister;
         iregister : tregister;
         jregister : tregister;
         hp1 : treference;
         hp2 : treference;
         hl : tasmlabel;
         hl2: tasmlabel;
         popaddress : boolean;
         srcref,dstref : treference;
         alignsize : tcgsize;
         orglen : tcgint;
      begin
         popaddress := false;
         hregister := getintregister(list,OS_INT);
         orglen:=len;

         { from 12 bytes movs is being used }
         if ((len<=8) or (not(cs_opt_size in current_settings.optimizerswitches) and (len<=12))) then
           begin
              srcref := source;
              dstref := dest;
              helpsize:=len div 4;
              { move a dword x times }
              for i:=1 to helpsize do
                begin
                   a_load_ref_reg(list,OS_INT,OS_INT,srcref,hregister);
                   a_load_reg_ref(list,OS_INT,OS_INT,hregister,dstref);
                   inc(srcref.offset,4);
                   inc(dstref.offset,4);
                   dec(len,4);
                end;
              { move a word }
              if len>1 then
                begin
                   if (orglen<sizeof(aint)) and
                       (source.base=NR_FRAME_POINTER_REG) and
                       (source.offset>0) then
                     { copy of param to local location }
                     alignsize:=OS_INT
                   else
                     alignsize:=OS_16;
                   a_load_ref_reg(list,alignsize,alignsize,srcref,hregister);
                   a_load_reg_ref(list,OS_16,OS_16,hregister,dstref);
                   inc(srcref.offset,2);
                   inc(dstref.offset,2);
                   dec(len,2);
                end;
              { move a single byte }
              if len>0 then
                begin
                   if (orglen<sizeof(aint)) and
                       (source.base=NR_FRAME_POINTER_REG) and
                       (source.offset>0) then
                     { copy of param to local location }
                     alignsize:=OS_INT
                   else
                     alignsize:=OS_8;
                   a_load_ref_reg(list,alignsize,alignsize,srcref,hregister);
                   a_load_reg_ref(list,OS_8,OS_8,hregister,dstref);
                end
           end
         else
           begin
              iregister:=getaddressregister(list);
              jregister:=getaddressregister(list);
              { reference for move (An)+,(An)+ }
              reference_reset(hp1,source.alignment);
              hp1.base := iregister;   { source register }
              hp1.direction := dir_inc;
              reference_reset(hp2,dest.alignment);
              hp2.base := jregister;
              hp2.direction := dir_inc;
              { iregister = source }
              { jregister = destination }

              a_loadaddr_ref_reg(list,source,iregister);
              a_loadaddr_ref_reg(list,dest,jregister);

              { double word move only on 68020+ machines }
              { because of possible alignment problems   }
              { use fast loop mode }
              if (current_settings.cputype=cpu_MC68020) then
                begin
                   //list.concat(tai_comment.create(strpnew('g_concatcopy tight copy loop 020+')));
                   helpsize := len - len mod 4;
                   len := len mod 4;
                   a_load_const_reg(list,OS_INT,(helpsize div 4)-1,hregister);
                   current_asmdata.getjumplabel(hl);
                   a_label(list,hl);
                   list.concat(taicpu.op_ref_ref(A_MOVE,S_L,hp1,hp2));
                   list.concat(taicpu.op_reg_sym(A_DBRA,S_L,hregister,hl));
                   if len > 1 then
                     begin
                        dec(len,2);
                        list.concat(taicpu.op_ref_ref(A_MOVE,S_W,hp1,hp2));
                     end;
                   if len = 1 then
                     list.concat(taicpu.op_ref_ref(A_MOVE,S_B,hp1,hp2));
                end
              else
                begin
                   { Fast 68010 loop mode with no possible alignment problems }
                   //list.concat(tai_comment.create(strpnew('g_concatcopy tight byte copy loop')));
                   a_load_const_reg(list,OS_INT,len - 1,hregister);
                   current_asmdata.getjumplabel(hl);
                   a_label(list,hl);
                   list.concat(taicpu.op_ref_ref(A_MOVE,S_B,hp1,hp2));
                   if current_settings.cputype in cpu_coldfire then
                     begin
                       { Coldfire does not support DBRA }
                       list.concat(taicpu.op_const_reg(A_SUBQ,S_L,1,hregister));
                       list.concat(taicpu.op_sym(A_BPL,S_NO,hl));
                     end
                   else
                     list.concat(taicpu.op_reg_sym(A_DBRA,S_L,hregister,hl));
                end;
           end;
    end;

    procedure tcg68k.g_overflowcheck(list: TAsmList; const l:tlocation; def:tdef);
      begin
      end;

    procedure tcg68k.g_proc_entry(list: TAsmList; localsize: longint; nostackframe:boolean);
      var
        r,rsp: TRegister;
        ref  : TReference;
      begin
        if not nostackframe then
          begin
	    if localsize<>0 then
	      begin
	        { size can't be negative }
		if (localsize < 0) then
		  internalerror(2006122601);

                { Not to complicate the code generator too much, and since some }
                { of the systems only support this format, the localsize cannot }
                { exceed 32K in size.                                           }
                if (localsize > high(smallint)) then
                  CGMessage(cg_e_localsize_too_big);

                list.concat(taicpu.op_reg_const(A_LINK,S_W,NR_FRAME_POINTER_REG,-localsize));
	      end
	    else
	      begin
	        list.concat(taicpu.op_reg_const(A_LINK,S_W,NR_FRAME_POINTER_REG,0));
(*
		{ FIXME! - Carl's original code uses this method. However,
		  according to the 68060 users manual, a LINK is faster than
		  two moves. So, use a link in #0 case too, for now. I'm not
		  really sure tho', that LINK supports #0 disposition, but i
		  see no reason why it shouldn't support it. (KB) }

	        { when localsize = 0, use two moves, instead of link }
		r:=NR_FRAME_POINTER_REG;
		rsp:=NR_STACK_POINTER_REG;

	        reference_reset_base(ref,NR_STACK_POINTER_REG,0);
		ref.direction:=dir_dec;
                list.concat(taicpu.op_reg_ref(A_MOVE,S_L,r,ref));
                instr:=taicpu.op_reg_reg(A_MOVE,S_L,rsp,r);
                add_move_instruction(instr); mwould also be needed
                list.concat(instr);
		*)
	      end;
          end;
      end;

    procedure tcg68k.g_proc_exit(list : TAsmList; parasize: longint; nostackframe: boolean);
      var
        r,hregister : TRegister;
        ref : TReference;
        ref2: TReference;
      begin
        if not nostackframe then
          begin
            list.concat(taicpu.op_reg(A_UNLK,S_NO,NR_FRAME_POINTER_REG));
            parasize := parasize - target_info.first_parm_offset; { i'm still not 100% confident that this is
                                                                    correct here, but at least it looks less
                                                                    hacky, and makes some sense (KB) }

            { if parasize is less than zero here, we probably have a cdecl function.
              According to the info here: http://www.makestuff.eu/wordpress/gcc-68000-abi/
              68k GCC uses two different methods to free the stack, depending if the target
              architecture supports RTD or not, and one does callee side, the other does
              caller side free, which looks like a PITA to support. We have to figure this 
              out later. More info welcomed. (KB) }

            if (parasize > 0) then
              begin
                if current_settings.cputype=cpu_mc68020 then
                  list.concat(taicpu.op_const(A_RTD,S_NO,parasize))
                else
                  begin
                    { We must pull the PC Counter from the stack, before  }
                    { restoring the stack pointer, otherwise the PC would }
                    { point to nowhere!                                   }

                    { Instead of doing a slow copy of the return address while trying    }
                    { to feed it to the RTS instruction, load the PC to A0 (scratch reg) }
                    { then free up the stack allocated for paras, then use a JMP (A0) to }
                    { return to the caller with the paras freed. (KB) }

                    hregister:=NR_A0;
                    cg.a_reg_alloc(list,hregister);
                    reference_reset_base(ref,NR_STACK_POINTER_REG,0,4);
                    list.concat(taicpu.op_ref_reg(A_MOVE,S_L,ref,hregister));

                    { instead of using a postincrement above (which also writes the     }
                    { stackpointer reg) simply add 4 to the parasize, the instructions  }
                    { below then take that size into account as well, so SP reg is only }
                    { written once (KB) }
                    parasize:=parasize+4;

                    r:=NR_SP;
                    { can we do a quick addition ... }
                    if (parasize < 9) then
                       list.concat(taicpu.op_const_reg(A_ADDQ,S_L,parasize,r))
                    else { nope ... }
                       begin
                         reference_reset_base(ref2,NR_STACK_POINTER_REG,parasize,4);
                         list.concat(taicpu.op_ref_reg(A_LEA,S_NO,ref2,r));
                       end;

                    reference_reset_base(ref,hregister,0,4);
                    list.concat(taicpu.op_ref(A_JMP,S_NO,ref));
                  end;
              end
            else
              list.concat(taicpu.op_none(A_RTS,S_NO));
          end
        else
          begin
            list.concat(taicpu.op_none(A_RTS,S_NO));
          end;

         { Routines with the poclearstack flag set use only a ret.
           also  routines with parasize=0 }
         { TODO: figure out if these are still relevant to us (KB) }
           (*
         if current_procinfo.procdef.proccalloption in clearstack_pocalls then
           begin
             { complex return values are removed from stack in C code PM }
             if paramanager.ret_in_param(current_procinfo.procdef.returndef,current_procinfo.procdef) then
               list.concat(taicpu.op_const(A_RTD,S_NO,4))
             else
               list.concat(taicpu.op_none(A_RTS,S_NO));
           end
         else if (parasize=0) then
           begin
             list.concat(taicpu.op_none(A_RTS,S_NO));
           end
         else
           *)
      end;


    procedure tcg68k.g_save_registers(list:TAsmList);
      var
        dataregs: tcpuregisterset;
        addrregs: tcpuregisterset;
        href : treference;
        hreg : tregister;
        size : longint;
        r : integer;
      begin
        { The code generated by the section below, particularly the movem.l
          instruction is known to cause an issue when compiled by some GNU 
          assembler versions (I had it with 2.17, while 2.24 seems OK.) 
          when you run into this problem, just call inherited here instead
          to skip the movem.l generation. But better just use working GNU
          AS version instead. (KB) }
        dataregs:=[];
        addrregs:=[];

        { calculate temp. size }
        size:=0;
        for r:=low(saved_standard_registers) to high(saved_standard_registers) do
          if saved_standard_registers[r] in rg[R_INTREGISTER].used_in_proc then
            begin
              hreg:=newreg(R_INTREGISTER,saved_address_registers[r],R_SUBWHOLE);
              inc(size,sizeof(aint));
              dataregs:=dataregs + [saved_standard_registers[r]];
            end;
        if uses_registers(R_ADDRESSREGISTER) then
          for r:=low(saved_address_registers) to high(saved_address_registers) do
            if saved_address_registers[r] in rg[R_ADDRESSREGISTER].used_in_proc then
              begin
                hreg:=newreg(R_ADDRESSREGISTER,saved_address_registers[r],R_SUBWHOLE);
                inc(size,sizeof(aint));
                addrregs:=addrregs + [saved_address_registers[r]];
              end;

        { 68k has no MM registers }
        if uses_registers(R_MMREGISTER) then
          internalerror(2014030201);

        if size>0 then
          begin
            tg.GetTemp(list,size,sizeof(aint),tt_noreuse,current_procinfo.save_regs_ref);
            include(current_procinfo.flags,pi_has_saved_regs);

            { Copy registers to temp }
            href:=current_procinfo.save_regs_ref;
            if size = sizeof(aint) then
              a_load_reg_ref(list, OS_32, OS_32, hreg, href)
            else
              list.concat(taicpu.op_regset_ref(A_MOVEM,S_L,dataregs,addrregs,href));
          end;
      end;


    procedure tcg68k.g_restore_registers(list:TAsmList);
      var
        dataregs: tcpuregisterset;
        addrregs: tcpuregisterset;
        href    : treference;
        r       : integer;
        hreg    : tregister;
        size    : longint;
      begin
        { see the remark about buggy GNU AS versions in g_save_registers() (KB) }
        dataregs:=[];
        addrregs:=[];

        if not(pi_has_saved_regs in current_procinfo.flags) then
          exit;
        { Copy registers from temp }
        size:=0;
        for r:=low(saved_standard_registers) to high(saved_standard_registers) do
          if saved_standard_registers[r] in rg[R_INTREGISTER].used_in_proc then
            begin
              inc(size,sizeof(aint));
              hreg:=newreg(R_INTREGISTER,saved_standard_registers[r],R_SUBWHOLE);
              { Allocate register so the optimizer does not remove the load }
              a_reg_alloc(list,hreg);
              dataregs:=dataregs + [saved_standard_registers[r]];
            end;

        if uses_registers(R_ADDRESSREGISTER) then
          for r:=low(saved_address_registers) to high(saved_address_registers) do
            if saved_address_registers[r] in rg[R_ADDRESSREGISTER].used_in_proc then
              begin
                inc(size,sizeof(aint));
                hreg:=newreg(R_ADDRESSREGISTER,saved_address_registers[r],R_SUBWHOLE);
                { Allocate register so the optimizer does not remove the load }
                a_reg_alloc(list,hreg);
                addrregs:=addrregs + [saved_address_registers[r]];
              end;

        { 68k has no MM registers }
        if uses_registers(R_MMREGISTER) then
          internalerror(2014030202);

        { Restore registers from temp }
        href:=current_procinfo.save_regs_ref;
        if size = sizeof(aint) then
          a_load_ref_reg(list, OS_32, OS_32, href, hreg)
        else
          list.concat(taicpu.op_ref_regset(A_MOVEM,S_L,href,dataregs,addrregs));

        tg.UnGetTemp(list,current_procinfo.save_regs_ref);
      end;

    procedure tcg68k.sign_extend(list: TAsmList;_oldsize : tcgsize; _newsize : tcgsize; reg: tregister);
      begin
        case _newsize of
          OS_S16, OS_16:
            case _oldsize of
              OS_S8:
                begin { 8 -> 16 bit sign extend }
                  if (isaddressregister(reg)) then
                     internalerror(2014031201);
                  list.concat(taicpu.op_reg(A_EXT,S_W,reg));
                end;
              OS_8: { 8 -> 16 bit zero extend }
                begin
                  if (current_settings.cputype in cpu_coldfire) then
                    { ColdFire has no ANDI.W }
                    list.concat(taicpu.op_const_reg(A_AND,S_L,$FF,reg))
                  else
                    list.concat(taicpu.op_const_reg(A_AND,S_W,$FF,reg));
                end;
            end;
          OS_S32, OS_32:
            case _oldsize of
              OS_S8:
                begin { 8 -> 32 bit sign extend }
                  if (isaddressregister(reg)) then
                    internalerror(2014031202);
                  if (current_settings.cputype = cpu_MC68000) then
                    begin
                      list.concat(taicpu.op_reg(A_EXT,S_W,reg));
                      list.concat(taicpu.op_reg(A_EXT,S_L,reg));
                    end
                  else
                    begin
                      //list.concat(tai_comment.create(strpnew('sign extend byte')));
                      list.concat(taicpu.op_reg(A_EXTB,S_L,reg));
                    end;
                end;
              OS_8: { 8 -> 32 bit zero extend }
                begin
                  //list.concat(tai_comment.create(strpnew('zero extend byte')));
                  list.concat(taicpu.op_const_reg(A_AND,S_L,$FF,reg));
                end;
              OS_S16: { 16 -> 32 bit sign extend }
                begin
                  if (isaddressregister(reg)) then
                    internalerror(2014031203);
                  //list.concat(tai_comment.create(strpnew('sign extend word')));
                  list.concat(taicpu.op_reg(A_EXT,S_L,reg));
                end;
              OS_16:
                begin
                  //list.concat(tai_comment.create(strpnew('zero extend byte')));
                  list.concat(taicpu.op_const_reg(A_AND,S_L,$FFFF,reg));
                end;
            end;
        end; { otherwise the size is already correct }
      end; 

    procedure tcg68k.sign_extend(list: TAsmList;_oldsize : tcgsize; reg: tregister);
      begin
        sign_extend(list, _oldsize, OS_INT, reg);
      end;

     procedure tcg68k.a_jmp_cond(list : TAsmList;cond : TOpCmp;l: tasmlabel);

       var
         ai : taicpu;

       begin
         if cond=OC_None then
           ai := Taicpu.Op_sym(A_JMP,S_NO,l)
         else
           begin
             ai:=Taicpu.Op_sym(A_Bxx,S_NO,l);
             ai.SetCondition(TOpCmp2AsmCond[cond]);
           end;
         ai.is_jmp:=true;
         list.concat(ai);
       end;

    { ensures a register is a dataregister. this is often used, as 68k can't do lots of
      operations on an address register. if the register is a dataregister anyway, it
      just returns it untouched.}
    function tcg68k.force_to_dataregister(list: TAsmList; size: TCGSize; reg: TRegister): TRegister;
      var
        scratch_reg: TRegister;
        instr: Taicpu;
      begin
        if isaddressregister(reg) then
          begin
            scratch_reg:=getintregister(list,OS_INT);
            instr:=taicpu.op_reg_reg(A_MOVE,S_L,reg,scratch_reg);
            add_move_instruction(instr);
            list.concat(instr);
            result:=scratch_reg;
          end
        else
          result:=reg;
      end;

    { moves source register to destination register, if the two are not the same. can be used in pair
      with force_to_dataregister() }
    procedure tcg68k.move_if_needed(list: TAsmList; size: TCGSize; src: TRegister; dest: TRegister);
      var
        instr: Taicpu;
      begin
        if (src <> dest) then
          begin
            instr:=taicpu.op_reg_reg(A_MOVE,S_L,src,dest);
            add_move_instruction(instr);
            list.concat(instr);
          end;
      end;


    procedure tcg68k.g_adjust_self_value(list:TAsmList;procdef: tprocdef;ioffset: tcgint);
      var
        hsym : tsym;
        href : treference;
        paraloc : Pcgparalocation;
      begin
        { calculate the parameter info for the procdef }
        procdef.init_paraloc_info(callerside);
        hsym:=tsym(procdef.parast.Find('self'));
        if not(assigned(hsym) and
               (hsym.typ=paravarsym)) then
          internalerror(2013100702);
        paraloc:=tparavarsym(hsym).paraloc[callerside].location;
        while paraloc<>nil do
          with paraloc^ do
            begin
              case loc of
                LOC_REGISTER:
                  a_op_const_reg(list,OP_SUB,size,ioffset,register);
                LOC_REFERENCE:
                  begin
                    { offset in the wrapper needs to be adjusted for the stored
                      return address }
                    reference_reset_base(href,reference.index,reference.offset-sizeof(pint),sizeof(pint));
                    list.concat(taicpu.op_ref_reg(A_MOVE,S_L,href,NR_D0));
                    list.concat(taicpu.op_const_reg(A_SUB,S_L,ioffset,NR_D0));
                    list.concat(taicpu.op_reg_ref(A_MOVE,S_L,NR_D0,href));
                  end
                else
                  internalerror(2013100703);
              end;
              paraloc:=next;
            end;
      end;


    procedure tcg68k.g_intf_wrapper(list: TAsmList; procdef: tprocdef; const labelname: string; ioffset: longint);

        procedure getselftoa0(offs:longint);
          var
            href : treference;
            selfoffsetfromsp : longint;
          begin
            { move.l offset(%sp),%a0 }

            { framepointer is pushed for nested procs }
            if procdef.parast.symtablelevel>normal_function_level then
              selfoffsetfromsp:=sizeof(aint)
            else
              selfoffsetfromsp:=0;
            reference_reset_base(href,NR_SP,selfoffsetfromsp+offs,4);
            cg.a_load_ref_reg(list,OS_ADDR,OS_ADDR,href,NR_A0);
          end;

        procedure loadvmttoa0;
        var
          href : treference;
        begin
          { move.l  (%a0),%a0 ; load vmt}
          reference_reset_base(href,NR_A0,0,4);
          cg.a_load_ref_reg(list,OS_ADDR,OS_ADDR,href,NR_A0);
        end;

        procedure op_ona0methodaddr;
        var
          href : treference;
          offs : longint;
        begin
          if (procdef.extnumber=$ffff) then
            Internalerror(2013100701);
          reference_reset_base(href,NR_A0,tobjectdef(procdef.struct).vmtmethodoffset(procdef.extnumber),4);
          list.concat(taicpu.op_ref_reg(A_MOVE,S_L,href,NR_A0));
          reference_reset_base(href,NR_A0,0,4);
          list.concat(taicpu.op_ref(A_JMP,S_L,href));
        end;

      var
        make_global : boolean;
      begin
        if not(procdef.proctypeoption in [potype_function,potype_procedure]) then
          Internalerror(200006137);
        if not assigned(procdef.struct) or
           (procdef.procoptions*[po_classmethod, po_staticmethod,
             po_methodpointer, po_interrupt, po_iocheck]<>[]) then
          Internalerror(200006138);
        if procdef.owner.symtabletype<>ObjectSymtable then
          Internalerror(200109191);

        make_global:=false;
        if (not current_module.is_unit) or
           create_smartlink or
           (procdef.owner.defowner.owner.symtabletype=globalsymtable) then
          make_global:=true;

        if make_global then
          List.concat(Tai_symbol.Createname_global(labelname,AT_FUNCTION,0))
        else
          List.concat(Tai_symbol.Createname(labelname,AT_FUNCTION,0));

        { set param1 interface to self  }
        g_adjust_self_value(list,procdef,ioffset);

        { case 4 }
        if (po_virtualmethod in procdef.procoptions) and
            not is_objectpascal_helper(procdef.struct) then
          begin
            getselftoa0(4);
            loadvmttoa0;
            op_ona0methodaddr;
          end
        { case 0 }
        else
          list.concat(taicpu.op_sym(A_JMP,S_L,current_asmdata.RefAsmSymbol(procdef.mangledname)));

        List.concat(Tai_symbol_end.Createname(labelname));
      end;


{****************************************************************************}
{                               TCG64F68K                                    }
{****************************************************************************}
    procedure tcg64f68k.a_op64_reg_reg(list : TAsmList;op:TOpCG;size: tcgsize; regsrc,regdst : tregister64);
      var
        hreg1, hreg2 : tregister;
        opcode : tasmop;
        xopcode : tasmop;
        instr : taicpu;
      begin
        opcode := topcg2tasmop[op];
        xopcode := topcg2tasmopx[op];

        case op of
          OP_ADD,OP_SUB:
            begin
              { if one of these three registers is an address
              register, we'll really get into problems! }
              if isaddressregister(regdst.reglo) or
                 isaddressregister(regdst.reghi) or
                 isaddressregister(regsrc.reghi) then
                internalerror(2014030101);
              list.concat(taicpu.op_reg_reg(opcode,S_L,regsrc.reglo,regdst.reglo));
              list.concat(taicpu.op_reg_reg(xopcode,S_L,regsrc.reghi,regdst.reghi));
            end;
          OP_AND,OP_OR:
            begin
              { at least one of the registers must be a data register }
              if (isaddressregister(regdst.reglo) and
                  isaddressregister(regsrc.reglo)) or
                 (isaddressregister(regsrc.reghi) and
                  isaddressregister(regdst.reghi)) then
                internalerror(2014030102);
              cg.a_op_reg_reg(list,op,OS_32,regsrc.reglo,regdst.reglo);
              cg.a_op_reg_reg(list,op,OS_32,regsrc.reghi,regdst.reghi);
            end;
          { this is handled in 1st pass for 32-bit cpu's (helper call) }
          OP_IDIV,OP_DIV,
          OP_IMUL,OP_MUL: 
            internalerror(2002081701);
          { this is also handled in 1st pass for 32-bit cpu's (helper call) }
          OP_SAR,OP_SHL,OP_SHR:
            internalerror(2002081702);
          OP_XOR:
            begin
              if isaddressregister(regdst.reglo) or
                 isaddressregister(regsrc.reglo) or
                 isaddressregister(regsrc.reghi) or
                 isaddressregister(regdst.reghi) then
                internalerror(2014030103);
              cg.a_op_reg_reg(list,op,OS_32,regsrc.reglo,regdst.reglo);
              cg.a_op_reg_reg(list,op,OS_32,regsrc.reghi,regdst.reghi);
            end;
          OP_NEG,OP_NOT:
            begin
              if isaddressregister(regdst.reglo) or
                 isaddressregister(regdst.reghi) then
               internalerror(2014030104);
              instr:=taicpu.op_reg_reg(A_MOVE,S_L,regsrc.reglo,regdst.reglo);
              cg.add_move_instruction(instr);
              list.concat(instr);
              instr:=taicpu.op_reg_reg(A_MOVE,S_L,regsrc.reghi,regdst.reghi);
              cg.add_move_instruction(instr);
              list.concat(instr);
              if (op = OP_NOT) then
                xopcode:=opcode;
              list.concat(taicpu.op_reg(opcode,S_L,regdst.reglo));
              list.concat(taicpu.op_reg(xopcode,S_L,regdst.reghi));
            end;
        end; { end case }
      end;


    procedure tcg64f68k.a_op64_const_reg(list : TAsmList;op:TOpCG;size: tcgsize; value : int64;regdst : tregister64);
      var
        lowvalue : cardinal;
        highvalue : cardinal;
        opcode : tasmop;
        xopcode : tasmop;
        hreg : tregister;
      begin
        { is it optimized out ? }
        { optimize64_op_const_reg doesn't seem to be used in any cg64f32 right now. why? (KB) }
        { if cg.optimize64_op_const_reg(list,op,value,reg) then
            exit; }

        lowvalue := cardinal(value);
        highvalue := value shr 32;

        opcode := topcg2tasmop[op];
        xopcode := topcg2tasmopx[op];

        { the destination registers must be data registers }
        if isaddressregister(regdst.reglo) or
           isaddressregister(regdst.reghi) then
          internalerror(2014030105);
        case op of
          OP_ADD,OP_SUB:
            begin
              hreg:=cg.getintregister(list,OS_INT);
              { cg.a_load_const_reg provides optimized loading to register for special cases }
              cg.a_load_const_reg(list,OS_S32,longint(highvalue),hreg);
              { don't use cg.a_op_const_reg() here, because a possible optimized
                ADDQ/SUBQ wouldn't set the eXtend bit }
              list.concat(taicpu.op_const_reg(opcode,S_L,lowvalue,regdst.reglo));
              list.concat(taicpu.op_reg_reg(xopcode,S_L,hreg,regdst.reghi));
            end;
          OP_AND,OP_OR,OP_XOR:
            begin
              cg.a_op_const_reg(list,op,OS_S32,longint(lowvalue),regdst.reglo);
              cg.a_op_const_reg(list,op,OS_S32,longint(highvalue),regdst.reghi);
            end;
          { this is handled in 1st pass for 32-bit cpus (helper call) }
          OP_IDIV,OP_DIV,
          OP_IMUL,OP_MUL:
            internalerror(2002081701);
          { this is also handled in 1st pass for 32-bit cpus (helper call) }
          OP_SAR,OP_SHL,OP_SHR: 
            internalerror(2002081702);
          { these should have been handled already by earlier passes }
          OP_NOT,OP_NEG:
            internalerror(2012110403);
        end; { end case }
      end;


procedure create_codegen;
  begin
    cg := tcg68k.create;
    cg64 :=tcg64f68k.create;
  end;

end.