| .. |
|
aopt386.pas
|
85d63d9fa9
* settings refactored
|
19 年之前 |
|
cgcpu.pas
|
a0723ccfd5
* also check if ECX is nonvolatile in is_ecx_used. Not strictly necessary for the current set of i386 calling conventions, but good as an extra safety precaution in case new calling conventions are added or the code is adapted and used on other platforms.
|
12 年之前 |
|
cpubase.inc
|
bfbb0c5b9d
* optimize mov/lea
|
12 年之前 |
|
cpuelf.pas
|
c2fed960c9
* Add android to supported targets for assemblers. It fixes assembling for i386-android.
|
12 年之前 |
|
cpuinfo.pas
|
e81d2d1f3b
* basic avx support for floating point operations (use -Cfavx to activate)
|
12 年之前 |
|
cpunode.pas
|
6165536b5e
+ added {$modeswitch objectivec1}/-Mobjectivec1 mode switch to enable
|
16 年之前 |
|
cpupara.pas
|
7f2750f188
* missing part of r24776, using a build server also has pitfalls :/
|
12 年之前 |
|
cpupi.pas
|
b1dc518ac4
* removed systems_need_16_byte_stack_alignment and use target_info.stackalign instead
|
13 年之前 |
|
cputarg.pas
|
d26f0552a0
* Sync with trunk r23404.
|
12 年之前 |
|
csopt386.pas
|
6f1f21c432
* optbase empty skeleton removed with two dependancies. Duplicate unit name caused problems.
|
16 年之前 |
|
daopt386.pas
|
283ff05127
* merged avx support in inline assembler developed by Torsten Grundke
|
13 年之前 |
|
hlcgcpu.pas
|
12ad6704f6
- Removed a number of unused variables, reduces noise at compilation.
|
13 年之前 |
|
i386att.inc
|
f6e846c574
+ added the NEC V20/V30 instructions
|
12 年之前 |
|
i386atts.inc
|
f6e846c574
+ added the NEC V20/V30 instructions
|
12 年之前 |
|
i386int.inc
|
f6e846c574
+ added the NEC V20/V30 instructions
|
12 年之前 |
|
i386nop.inc
|
0f69362edd
- rm LEA reg,imm from x86ins.dat, as that's not a valid x86 instruction,
|
12 年之前 |
|
i386op.inc
|
f6e846c574
+ added the NEC V20/V30 instructions
|
12 年之前 |
|
i386prop.inc
|
f6e846c574
+ added the NEC V20/V30 instructions
|
12 年之前 |
|
i386tab.inc
|
f132a804d6
+ handle 32 bit references on x86-64 so lea can be used for 32 bit arithmetics
|
12 年之前 |
|
n386add.pas
|
e10a95bf16
- removed unneeded firstcomplex calls, pass_left_right calls already firstcomplex
|
13 年之前 |
|
n386cal.pas
|
e13e2e1697
* Turn off special handling of interrupt calling convention for i386-android.
|
12 年之前 |
|
n386inl.pas
|
66e82f1655
+ i386: generate optimized code for 64-bit arithmetic shifts by constant amount. Shifts by 63 and by less than 32 take just two instructions, shifts by 32..62 bits are done with 3 instructions.
|
12 年之前 |
|
n386mat.pas
|
edd42aa42a
* moved subsetref/reg and bit_set/test support from cgobj to hlcgobj for
|
13 年之前 |
|
n386mem.pas
|
b0f7786782
+ added support for special versions of near data pointers associated with a x86 segment register. They are supported on all x86 platforms: i8086, i386 and x86_64
|
12 年之前 |
|
n386set.pas
|
d0db391d7c
* cleanup of unused units
|
12 年之前 |
|
popt386.pas
|
1843ed59b5
* set p to a valid instruction
|
12 年之前 |
|
r386ari.inc
|
5af873ee5b
* x86 targets: Profiling shows that quite a bit of time is spent in findreg_by_number(), despite it uses binary search. Worse, it is repeated for every piece of register information. Trying to get rid of some of these calls: rearranged registers so that their "opcode" matches 3 LSBs of superregister number (with a few exceptions described at the beginning of x86reg.dat). This allows to lookup opcodes in regval() with O(1) complexity, and removes need in rXXXop.inc files.
|
12 年之前 |
|
r386att.inc
|
5af873ee5b
* x86 targets: Profiling shows that quite a bit of time is spent in findreg_by_number(), despite it uses binary search. Worse, it is repeated for every piece of register information. Trying to get rid of some of these calls: rearranged registers so that their "opcode" matches 3 LSBs of superregister number (with a few exceptions described at the beginning of x86reg.dat). This allows to lookup opcodes in regval() with O(1) complexity, and removes need in rXXXop.inc files.
|
12 年之前 |
|
r386con.inc
|
5af873ee5b
* x86 targets: Profiling shows that quite a bit of time is spent in findreg_by_number(), despite it uses binary search. Worse, it is repeated for every piece of register information. Trying to get rid of some of these calls: rearranged registers so that their "opcode" matches 3 LSBs of superregister number (with a few exceptions described at the beginning of x86reg.dat). This allows to lookup opcodes in regval() with O(1) complexity, and removes need in rXXXop.inc files.
|
12 年之前 |
|
r386dwrf.inc
|
5af873ee5b
* x86 targets: Profiling shows that quite a bit of time is spent in findreg_by_number(), despite it uses binary search. Worse, it is repeated for every piece of register information. Trying to get rid of some of these calls: rearranged registers so that their "opcode" matches 3 LSBs of superregister number (with a few exceptions described at the beginning of x86reg.dat). This allows to lookup opcodes in regval() with O(1) complexity, and removes need in rXXXop.inc files.
|
12 年之前 |
|
r386int.inc
|
5af873ee5b
* x86 targets: Profiling shows that quite a bit of time is spent in findreg_by_number(), despite it uses binary search. Worse, it is repeated for every piece of register information. Trying to get rid of some of these calls: rearranged registers so that their "opcode" matches 3 LSBs of superregister number (with a few exceptions described at the beginning of x86reg.dat). This allows to lookup opcodes in regval() with O(1) complexity, and removes need in rXXXop.inc files.
|
12 年之前 |
|
r386iri.inc
|
5af873ee5b
* x86 targets: Profiling shows that quite a bit of time is spent in findreg_by_number(), despite it uses binary search. Worse, it is repeated for every piece of register information. Trying to get rid of some of these calls: rearranged registers so that their "opcode" matches 3 LSBs of superregister number (with a few exceptions described at the beginning of x86reg.dat). This allows to lookup opcodes in regval() with O(1) complexity, and removes need in rXXXop.inc files.
|
12 年之前 |
|
r386nasm.inc
|
5af873ee5b
* x86 targets: Profiling shows that quite a bit of time is spent in findreg_by_number(), despite it uses binary search. Worse, it is repeated for every piece of register information. Trying to get rid of some of these calls: rearranged registers so that their "opcode" matches 3 LSBs of superregister number (with a few exceptions described at the beginning of x86reg.dat). This allows to lookup opcodes in regval() with O(1) complexity, and removes need in rXXXop.inc files.
|
12 年之前 |
|
r386nor.inc
|
283ff05127
* merged avx support in inline assembler developed by Torsten Grundke
|
13 年之前 |
|
r386nri.inc
|
5af873ee5b
* x86 targets: Profiling shows that quite a bit of time is spent in findreg_by_number(), despite it uses binary search. Worse, it is repeated for every piece of register information. Trying to get rid of some of these calls: rearranged registers so that their "opcode" matches 3 LSBs of superregister number (with a few exceptions described at the beginning of x86reg.dat). This allows to lookup opcodes in regval() with O(1) complexity, and removes need in rXXXop.inc files.
|
12 年之前 |
|
r386num.inc
|
5af873ee5b
* x86 targets: Profiling shows that quite a bit of time is spent in findreg_by_number(), despite it uses binary search. Worse, it is repeated for every piece of register information. Trying to get rid of some of these calls: rearranged registers so that their "opcode" matches 3 LSBs of superregister number (with a few exceptions described at the beginning of x86reg.dat). This allows to lookup opcodes in regval() with O(1) complexity, and removes need in rXXXop.inc files.
|
12 年之前 |
|
r386ot.inc
|
5af873ee5b
* x86 targets: Profiling shows that quite a bit of time is spent in findreg_by_number(), despite it uses binary search. Worse, it is repeated for every piece of register information. Trying to get rid of some of these calls: rearranged registers so that their "opcode" matches 3 LSBs of superregister number (with a few exceptions described at the beginning of x86reg.dat). This allows to lookup opcodes in regval() with O(1) complexity, and removes need in rXXXop.inc files.
|
12 年之前 |
|
r386rni.inc
|
5af873ee5b
* x86 targets: Profiling shows that quite a bit of time is spent in findreg_by_number(), despite it uses binary search. Worse, it is repeated for every piece of register information. Trying to get rid of some of these calls: rearranged registers so that their "opcode" matches 3 LSBs of superregister number (with a few exceptions described at the beginning of x86reg.dat). This allows to lookup opcodes in regval() with O(1) complexity, and removes need in rXXXop.inc files.
|
12 年之前 |
|
r386sri.inc
|
5af873ee5b
* x86 targets: Profiling shows that quite a bit of time is spent in findreg_by_number(), despite it uses binary search. Worse, it is repeated for every piece of register information. Trying to get rid of some of these calls: rearranged registers so that their "opcode" matches 3 LSBs of superregister number (with a few exceptions described at the beginning of x86reg.dat). This allows to lookup opcodes in regval() with O(1) complexity, and removes need in rXXXop.inc files.
|
12 年之前 |
|
r386stab.inc
|
283ff05127
* merged avx support in inline assembler developed by Torsten Grundke
|
13 年之前 |
|
r386std.inc
|
5af873ee5b
* x86 targets: Profiling shows that quite a bit of time is spent in findreg_by_number(), despite it uses binary search. Worse, it is repeated for every piece of register information. Trying to get rid of some of these calls: rearranged registers so that their "opcode" matches 3 LSBs of superregister number (with a few exceptions described at the beginning of x86reg.dat). This allows to lookup opcodes in regval() with O(1) complexity, and removes need in rXXXop.inc files.
|
12 年之前 |
|
ra386att.pas
|
757ed4e8d3
* standard assembler reader for i386
|
20 年之前 |
|
ra386int.pas
|
6c6bf452ca
* Fixed level 2 comment warnings.
|
17 年之前 |
|
rgcpu.pas
|
b7fe6797bf
Merged revisions 2921-2922,2925 via svnmerge from
|
19 年之前 |
|
rropt386.pas
|
7d459cf12a
* the compiler now explicitly keeps track of the minimally guaranteed
|
16 年之前 |
florian
1843ed59b5
* set p to a valid instruction