psub.pas 70 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921922923924925926927928929930931932933934935936937938939940941942943944945946947948949950951952953954955956957958959960961962963964965966967968969970971972973974975976977978979980981982983984985986987988989990991992993994995996997998999100010011002100310041005100610071008100910101011101210131014101510161017101810191020102110221023102410251026102710281029103010311032103310341035103610371038103910401041104210431044104510461047104810491050105110521053105410551056105710581059106010611062106310641065106610671068106910701071107210731074107510761077107810791080108110821083108410851086108710881089109010911092109310941095109610971098109911001101110211031104110511061107110811091110111111121113111411151116111711181119112011211122112311241125112611271128112911301131113211331134113511361137113811391140114111421143114411451146114711481149115011511152115311541155115611571158115911601161116211631164116511661167116811691170117111721173117411751176117711781179118011811182118311841185118611871188118911901191119211931194119511961197119811991200120112021203120412051206120712081209121012111212121312141215121612171218121912201221122212231224122512261227122812291230123112321233123412351236123712381239124012411242124312441245124612471248124912501251125212531254125512561257125812591260126112621263126412651266126712681269127012711272127312741275127612771278127912801281128212831284128512861287128812891290129112921293129412951296129712981299130013011302130313041305130613071308130913101311131213131314131513161317131813191320132113221323132413251326132713281329133013311332133313341335133613371338133913401341134213431344134513461347134813491350135113521353135413551356135713581359136013611362136313641365136613671368136913701371137213731374137513761377137813791380138113821383138413851386138713881389139013911392139313941395139613971398139914001401140214031404140514061407140814091410141114121413141414151416141714181419142014211422142314241425142614271428142914301431143214331434143514361437143814391440144114421443144414451446144714481449145014511452145314541455145614571458145914601461146214631464146514661467146814691470147114721473147414751476147714781479148014811482148314841485148614871488148914901491149214931494149514961497149814991500150115021503150415051506150715081509151015111512151315141515151615171518151915201521152215231524152515261527152815291530153115321533153415351536153715381539154015411542154315441545154615471548154915501551155215531554155515561557155815591560156115621563156415651566156715681569157015711572157315741575157615771578157915801581158215831584158515861587158815891590159115921593159415951596159715981599160016011602160316041605160616071608160916101611161216131614161516161617161816191620162116221623162416251626162716281629163016311632163316341635163616371638163916401641164216431644164516461647164816491650165116521653165416551656165716581659166016611662166316641665166616671668166916701671167216731674167516761677167816791680168116821683168416851686168716881689169016911692169316941695169616971698169917001701170217031704170517061707170817091710171117121713171417151716171717181719172017211722172317241725172617271728172917301731173217331734173517361737173817391740174117421743174417451746174717481749175017511752175317541755175617571758175917601761176217631764176517661767176817691770177117721773177417751776177717781779178017811782178317841785178617871788178917901791179217931794179517961797179817991800180118021803180418051806180718081809181018111812181318141815181618171818181918201821182218231824182518261827182818291830183118321833183418351836183718381839184018411842184318441845184618471848184918501851185218531854185518561857
  1. {
  2. Copyright (c) 1998-2002 by Florian Klaempfl, Daniel Mantione
  3. Does the parsing and codegeneration at subroutine level
  4. This program is free software; you can redistribute it and/or modify
  5. it under the terms of the GNU General Public License as published by
  6. the Free Software Foundation; either version 2 of the License, or
  7. (at your option) any later version.
  8. This program is distributed in the hope that it will be useful,
  9. but WITHOUT ANY WARRANTY; without even the implied warranty of
  10. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  11. GNU General Public License for more details.
  12. You should have received a copy of the GNU General Public License
  13. along with this program; if not, write to the Free Software
  14. Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  15. ****************************************************************************
  16. }
  17. unit psub;
  18. {$i fpcdefs.inc}
  19. interface
  20. uses
  21. cclasses,globals,
  22. node,nbas,
  23. symdef,procinfo,optdfa;
  24. type
  25. tcgprocinfo = class(tprocinfo)
  26. private
  27. procedure add_entry_exit_code;
  28. public
  29. { code for the subroutine as tree }
  30. code : tnode;
  31. { positions in the tree for init/final }
  32. entry_asmnode,
  33. loadpara_asmnode,
  34. exitlabel_asmnode,
  35. stackcheck_asmnode,
  36. init_asmnode,
  37. final_asmnode : tasmnode;
  38. { list to store the procinfo's of the nested procedures }
  39. nestedprocs : tlinkedlist;
  40. dfabuilder : TDFABuilder;
  41. constructor create(aparent:tprocinfo);override;
  42. destructor destroy;override;
  43. procedure printproc;
  44. procedure generate_code;
  45. procedure resetprocdef;
  46. procedure add_to_symtablestack;
  47. procedure remove_from_symtablestack;
  48. procedure parse_body;
  49. function stack_tainting_parameter : boolean;
  50. function has_assembler_child : boolean;
  51. end;
  52. procedure printnode_reset;
  53. { reads the declaration blocks }
  54. procedure read_declarations(islibrary : boolean);
  55. { reads declarations in the interface part of a unit }
  56. procedure read_interface_declarations;
  57. procedure generate_specialization_procs;
  58. implementation
  59. uses
  60. sysutils,
  61. { common }
  62. cutils,
  63. { global }
  64. globtype,tokens,verbose,comphook,constexp,
  65. systems,
  66. { aasm }
  67. cpubase,aasmbase,aasmtai,aasmdata,
  68. { symtable }
  69. symconst,symbase,symsym,symtype,symtable,defutil,
  70. paramgr,
  71. ppu,fmodule,
  72. { pass 1 }
  73. nutils,nld,ncal,ncon,nflw,nadd,ncnv,nmem,
  74. pass_1,
  75. {$ifdef state_tracking}
  76. nstate,
  77. {$endif state_tracking}
  78. { pass 2 }
  79. {$ifndef NOPASS2}
  80. pass_2,
  81. {$endif}
  82. { parser }
  83. scanner,import,gendef,
  84. pbase,pstatmnt,pdecl,pdecsub,pexports,
  85. { codegen }
  86. tgobj,cgbase,cgobj,dbgbase,
  87. ncgutil,regvars,
  88. optbase,
  89. opttail,
  90. optcse,
  91. optutils
  92. {$if defined(arm) or defined(powerpc) or defined(powerpc64)}
  93. ,aasmcpu
  94. {$endif arm}
  95. {$ifndef NOOPT}
  96. {$ifdef i386}
  97. ,aopt386
  98. {$else i386}
  99. ,aopt
  100. {$endif i386}
  101. {$endif}
  102. ;
  103. {****************************************************************************
  104. PROCEDURE/FUNCTION BODY PARSING
  105. ****************************************************************************}
  106. procedure initializevars(p:TObject;arg:pointer);
  107. var
  108. b : tblocknode;
  109. begin
  110. if not (tsym(p).typ in [localvarsym,staticvarsym]) then
  111. exit;
  112. with tabstractnormalvarsym(p) do
  113. begin
  114. if assigned(defaultconstsym) then
  115. begin
  116. b:=tblocknode(arg);
  117. b.left:=cstatementnode.create(
  118. cassignmentnode.create(
  119. cloadnode.create(tsym(p),tsym(p).owner),
  120. cloadnode.create(defaultconstsym,defaultconstsym.owner)),
  121. b.left);
  122. end;
  123. end;
  124. end;
  125. procedure check_finalize_paras(p:TObject;arg:pointer);
  126. begin
  127. if (tsym(p).typ=paravarsym) and
  128. (tparavarsym(p).varspez=vs_value) and
  129. not is_class(tparavarsym(p).vardef) and
  130. tparavarsym(p).vardef.needs_inittable then
  131. include(current_procinfo.flags,pi_needs_implicit_finally);
  132. end;
  133. procedure check_finalize_locals(p:TObject;arg:pointer);
  134. begin
  135. if (tsym(p).typ=localvarsym) and
  136. (tlocalvarsym(p).refs>0) and
  137. not(vo_is_funcret in tlocalvarsym(p).varoptions) and
  138. not(is_class(tlocalvarsym(p).vardef)) and
  139. tlocalvarsym(p).vardef.needs_inittable then
  140. include(current_procinfo.flags,pi_needs_implicit_finally);
  141. end;
  142. function block(islibrary : boolean) : tnode;
  143. begin
  144. { parse const,types and vars }
  145. read_declarations(islibrary);
  146. { do we have an assembler block without the po_assembler?
  147. we should allow this for Delphi compatibility (PFV) }
  148. if (token=_ASM) and (m_delphi in current_settings.modeswitches) then
  149. include(current_procinfo.procdef.procoptions,po_assembler);
  150. { Handle assembler block different }
  151. if (po_assembler in current_procinfo.procdef.procoptions) then
  152. begin
  153. block:=assembler_block;
  154. exit;
  155. end;
  156. {Unit initialization?.}
  157. if (
  158. assigned(current_procinfo.procdef.localst) and
  159. (current_procinfo.procdef.localst.symtablelevel=main_program_level) and
  160. (current_module.is_unit)
  161. ) or
  162. islibrary then
  163. begin
  164. if (token=_END) then
  165. begin
  166. consume(_END);
  167. { We need at least a node, else the entry/exit code is not
  168. generated and thus no PASCALMAIN symbol which we need (PFV) }
  169. if islibrary then
  170. block:=cnothingnode.create
  171. else
  172. block:=nil;
  173. end
  174. else
  175. begin
  176. if token=_INITIALIZATION then
  177. begin
  178. { The library init code is already called and does not
  179. need to be in the initfinal table (PFV) }
  180. if not islibrary then
  181. current_module.flags:=current_module.flags or uf_init;
  182. block:=statement_block(_INITIALIZATION);
  183. end
  184. else if (token=_FINALIZATION) then
  185. begin
  186. if (current_module.flags and uf_finalize)<>0 then
  187. block:=statement_block(_FINALIZATION)
  188. else
  189. begin
  190. { can we allow no INITIALIZATION for DLL ??
  191. I think it should work PM }
  192. block:=nil;
  193. exit;
  194. end;
  195. end
  196. else
  197. begin
  198. { The library init code is already called and does not
  199. need to be in the initfinal table (PFV) }
  200. if not islibrary then
  201. current_module.flags:=current_module.flags or uf_init;
  202. block:=statement_block(_BEGIN);
  203. end;
  204. end;
  205. end
  206. else
  207. begin
  208. block:=statement_block(_BEGIN);
  209. if current_procinfo.procdef.localst.symtabletype=localsymtable then
  210. current_procinfo.procdef.localst.SymList.ForEachCall(@initializevars,block);
  211. end;
  212. end;
  213. {****************************************************************************
  214. PROCEDURE/FUNCTION COMPILING
  215. ****************************************************************************}
  216. procedure printnode_reset;
  217. begin
  218. assign(printnodefile,treelogfilename);
  219. {$I-}
  220. rewrite(printnodefile);
  221. {$I+}
  222. if ioresult<>0 then
  223. begin
  224. Comment(V_Error,'Error creating '+treelogfilename);
  225. exit;
  226. end;
  227. close(printnodefile);
  228. end;
  229. function generate_bodyentry_block:tnode;
  230. var
  231. srsym : tsym;
  232. para : tcallparanode;
  233. newstatement : tstatementnode;
  234. hdef : tdef;
  235. begin
  236. result:=internalstatements(newstatement);
  237. if assigned(current_procinfo.procdef._class) then
  238. begin
  239. { a constructor needs a help procedure }
  240. if (current_procinfo.procdef.proctypeoption=potype_constructor) then
  241. begin
  242. if is_class(current_procinfo.procdef._class) then
  243. begin
  244. include(current_procinfo.flags,pi_needs_implicit_finally);
  245. srsym:=search_class_member(current_procinfo.procdef._class,'NEWINSTANCE');
  246. if assigned(srsym) and
  247. (srsym.typ=procsym) then
  248. begin
  249. { if vmt>1 then newinstance }
  250. addstatement(newstatement,cifnode.create(
  251. caddnode.create(gtn,
  252. ctypeconvnode.create_internal(
  253. load_vmt_pointer_node,
  254. voidpointertype),
  255. cpointerconstnode.create(1,voidpointertype)),
  256. cassignmentnode.create(
  257. ctypeconvnode.create_internal(
  258. load_self_pointer_node,
  259. voidpointertype),
  260. ccallnode.create(nil,tprocsym(srsym),srsym.owner,load_vmt_pointer_node,[])),
  261. nil));
  262. end
  263. else
  264. internalerror(200305108);
  265. end
  266. else
  267. if is_object(current_procinfo.procdef._class) then
  268. begin
  269. hdef:=current_procinfo.procdef._class;
  270. hdef:=tpointerdef.create(hdef);
  271. { parameter 3 : vmt_offset }
  272. { parameter 2 : address of pointer to vmt,
  273. this is required to allow setting the vmt to -1 to indicate
  274. that memory was allocated }
  275. { parameter 1 : self pointer }
  276. para:=ccallparanode.create(
  277. cordconstnode.create(current_procinfo.procdef._class.vmt_offset,s32inttype,false),
  278. ccallparanode.create(
  279. ctypeconvnode.create_internal(
  280. load_vmt_pointer_node,
  281. voidpointertype),
  282. ccallparanode.create(
  283. ctypeconvnode.create_internal(
  284. load_self_pointer_node,
  285. voidpointertype),
  286. nil)));
  287. addstatement(newstatement,cassignmentnode.create(
  288. ctypeconvnode.create_internal(
  289. load_self_pointer_node,
  290. voidpointertype),
  291. ccallnode.createintern('fpc_help_constructor',para)));
  292. end
  293. else
  294. internalerror(200305103);
  295. { if self=nil then exit
  296. calling fail instead of exit is useless because
  297. there is nothing to dispose (PFV) }
  298. addstatement(newstatement,cifnode.create(
  299. caddnode.create(equaln,
  300. load_self_pointer_node,
  301. cnilnode.create),
  302. cexitnode.create(nil),
  303. nil));
  304. end;
  305. { maybe call BeforeDestruction for classes }
  306. if (current_procinfo.procdef.proctypeoption=potype_destructor) and
  307. is_class(current_procinfo.procdef._class) then
  308. begin
  309. srsym:=search_class_member(current_procinfo.procdef._class,'BEFOREDESTRUCTION');
  310. if assigned(srsym) and
  311. (srsym.typ=procsym) then
  312. begin
  313. { if vmt>0 then beforedestruction }
  314. addstatement(newstatement,cifnode.create(
  315. caddnode.create(gtn,
  316. ctypeconvnode.create_internal(
  317. load_vmt_pointer_node,ptrsinttype),
  318. ctypeconvnode.create_internal(
  319. cnilnode.create,ptrsinttype)),
  320. ccallnode.create(nil,tprocsym(srsym),srsym.owner,load_self_node,[]),
  321. nil));
  322. end
  323. else
  324. internalerror(200305104);
  325. end;
  326. end;
  327. end;
  328. function generate_bodyexit_block:tnode;
  329. var
  330. srsym : tsym;
  331. para : tcallparanode;
  332. newstatement : tstatementnode;
  333. oldlocalswitches: tlocalswitches;
  334. begin
  335. result:=internalstatements(newstatement);
  336. if assigned(current_procinfo.procdef._class) then
  337. begin
  338. { Don't test self and the vmt here. The reason is that }
  339. { a constructor already checks whether these are valid }
  340. { before. Further, in case of TThread the thread may }
  341. { free the class instance right after AfterConstruction }
  342. { has been called, so it may no longer be valid (JM) }
  343. oldlocalswitches:=current_settings.localswitches;
  344. current_settings.localswitches:=oldlocalswitches-[cs_check_object,cs_check_range];
  345. { maybe call AfterConstruction for classes }
  346. if (current_procinfo.procdef.proctypeoption=potype_constructor) and
  347. is_class(current_procinfo.procdef._class) then
  348. begin
  349. srsym:=search_class_member(current_procinfo.procdef._class,'AFTERCONSTRUCTION');
  350. if assigned(srsym) and
  351. (srsym.typ=procsym) then
  352. begin
  353. { Self can be nil when fail is called }
  354. { if self<>nil and vmt<>nil then afterconstruction }
  355. addstatement(newstatement,cifnode.create(
  356. caddnode.create(andn,
  357. caddnode.create(unequaln,
  358. load_self_pointer_node,
  359. cnilnode.create),
  360. caddnode.create(unequaln,
  361. load_vmt_pointer_node,
  362. cnilnode.create)),
  363. ccallnode.create(nil,tprocsym(srsym),srsym.owner,load_self_node,[]),
  364. nil));
  365. end
  366. else
  367. internalerror(200305106);
  368. end;
  369. { a destructor needs a help procedure }
  370. if (current_procinfo.procdef.proctypeoption=potype_destructor) then
  371. begin
  372. if is_class(current_procinfo.procdef._class) then
  373. begin
  374. srsym:=search_class_member(current_procinfo.procdef._class,'FREEINSTANCE');
  375. if assigned(srsym) and
  376. (srsym.typ=procsym) then
  377. begin
  378. { if self<>0 and vmt<>0 then freeinstance }
  379. addstatement(newstatement,cifnode.create(
  380. caddnode.create(andn,
  381. caddnode.create(unequaln,
  382. load_self_pointer_node,
  383. cnilnode.create),
  384. caddnode.create(unequaln,
  385. ctypeconvnode.create(
  386. load_vmt_pointer_node,
  387. voidpointertype),
  388. cpointerconstnode.create(0,voidpointertype))),
  389. ccallnode.create(nil,tprocsym(srsym),srsym.owner,load_self_node,[]),
  390. nil));
  391. end
  392. else
  393. internalerror(200305108);
  394. end
  395. else
  396. if is_object(current_procinfo.procdef._class) then
  397. begin
  398. { finalize object data }
  399. if current_procinfo.procdef._class.needs_inittable then
  400. addstatement(newstatement,finalize_data_node(load_self_node));
  401. { parameter 3 : vmt_offset }
  402. { parameter 2 : pointer to vmt }
  403. { parameter 1 : self pointer }
  404. para:=ccallparanode.create(
  405. cordconstnode.create(current_procinfo.procdef._class.vmt_offset,s32inttype,false),
  406. ccallparanode.create(
  407. ctypeconvnode.create_internal(
  408. load_vmt_pointer_node,
  409. voidpointertype),
  410. ccallparanode.create(
  411. ctypeconvnode.create_internal(
  412. load_self_pointer_node,
  413. voidpointertype),
  414. nil)));
  415. addstatement(newstatement,
  416. ccallnode.createintern('fpc_help_destructor',para));
  417. end
  418. else
  419. internalerror(200305105);
  420. end;
  421. current_settings.localswitches:=oldlocalswitches;
  422. end;
  423. end;
  424. function generate_except_block:tnode;
  425. var
  426. pd : tprocdef;
  427. newstatement : tstatementnode;
  428. oldlocalswitches: tlocalswitches;
  429. begin
  430. generate_except_block:=internalstatements(newstatement);
  431. { a constructor needs call destructor (if available) when it
  432. is not inherited }
  433. if assigned(current_procinfo.procdef._class) and
  434. (current_procinfo.procdef.proctypeoption=potype_constructor) then
  435. begin
  436. { Don't test self and the vmt here. See generate_bodyexit_block }
  437. { why (JM) }
  438. oldlocalswitches:=current_settings.localswitches;
  439. current_settings.localswitches:=oldlocalswitches-[cs_check_object,cs_check_range];
  440. pd:=current_procinfo.procdef._class.Finddestructor;
  441. if assigned(pd) then
  442. begin
  443. { if vmt<>0 then call destructor }
  444. addstatement(newstatement,cifnode.create(
  445. caddnode.create(unequaln,
  446. load_vmt_pointer_node,
  447. cnilnode.create),
  448. { cnf_create_failed -> don't call BeforeDestruction }
  449. ccallnode.create(nil,tprocsym(pd.procsym),pd.procsym.owner,load_self_node,[cnf_create_failed]),
  450. nil));
  451. end;
  452. current_settings.localswitches:=oldlocalswitches;
  453. end
  454. else
  455. begin
  456. { no constructor }
  457. { must be the return value finalized before reraising the exception? }
  458. if (not is_void(current_procinfo.procdef.returndef)) and
  459. (current_procinfo.procdef.returndef.needs_inittable) and
  460. (not is_class(current_procinfo.procdef.returndef)) then
  461. addstatement(newstatement,finalize_data_node(load_result_node));
  462. end;
  463. end;
  464. {****************************************************************************
  465. TCGProcInfo
  466. ****************************************************************************}
  467. constructor tcgprocinfo.create(aparent:tprocinfo);
  468. begin
  469. inherited Create(aparent);
  470. nestedprocs:=tlinkedlist.create;
  471. end;
  472. destructor tcgprocinfo.destroy;
  473. begin
  474. nestedprocs.free;
  475. if assigned(code) then
  476. code.free;
  477. inherited destroy;
  478. end;
  479. procedure tcgprocinfo.printproc;
  480. begin
  481. assign(printnodefile,treelogfilename);
  482. {$I-}
  483. append(printnodefile);
  484. if ioresult<>0 then
  485. rewrite(printnodefile);
  486. {$I+}
  487. if ioresult<>0 then
  488. begin
  489. Comment(V_Error,'Error creating '+treelogfilename);
  490. exit;
  491. end;
  492. writeln(printnodefile);
  493. writeln(printnodefile,'*******************************************************************************');
  494. writeln(printnodefile,procdef.fullprocname(false));
  495. writeln(printnodefile,'*******************************************************************************');
  496. printnode(printnodefile,code);
  497. close(printnodefile);
  498. end;
  499. procedure tcgprocinfo.add_entry_exit_code;
  500. var
  501. finalcode,
  502. bodyentrycode,
  503. bodyexitcode,
  504. exceptcode : tnode;
  505. newblock : tblocknode;
  506. codestatement,
  507. newstatement : tstatementnode;
  508. oldfilepos : tfileposinfo;
  509. begin
  510. oldfilepos:=current_filepos;
  511. { Generate code/locations used at start of proc }
  512. current_filepos:=entrypos;
  513. entry_asmnode:=casmnode.create_get_position;
  514. loadpara_asmnode:=casmnode.create_get_position;
  515. stackcheck_asmnode:=casmnode.create_get_position;
  516. init_asmnode:=casmnode.create_get_position;
  517. bodyentrycode:=generate_bodyentry_block;
  518. { Generate code/locations used at end of proc }
  519. current_filepos:=exitpos;
  520. exitlabel_asmnode:=casmnode.create_get_position;
  521. final_asmnode:=casmnode.create_get_position;
  522. bodyexitcode:=generate_bodyexit_block;
  523. { Generate procedure by combining init+body+final,
  524. depending on the implicit finally we need to add
  525. an try...finally...end wrapper }
  526. newblock:=internalstatements(newstatement);
  527. if (cs_implicit_exceptions in current_settings.moduleswitches) and
  528. (pi_needs_implicit_finally in flags) and
  529. { but it's useless in init/final code of units }
  530. not(procdef.proctypeoption in [potype_unitfinalize,potype_unitinit]) then
  531. begin
  532. { Generate special exception block only needed when
  533. implicit finaly is used }
  534. current_filepos:=exitpos;
  535. exceptcode:=generate_except_block;
  536. { Generate code that will be in the try...finally }
  537. finalcode:=internalstatements(codestatement);
  538. addstatement(codestatement,final_asmnode);
  539. { Initialize before try...finally...end frame }
  540. addstatement(newstatement,loadpara_asmnode);
  541. addstatement(newstatement,stackcheck_asmnode);
  542. addstatement(newstatement,entry_asmnode);
  543. addstatement(newstatement,init_asmnode);
  544. addstatement(newstatement,bodyentrycode);
  545. current_filepos:=entrypos;
  546. addstatement(newstatement,ctryfinallynode.create_implicit(
  547. code,
  548. finalcode,
  549. exceptcode));
  550. addstatement(newstatement,exitlabel_asmnode);
  551. addstatement(newstatement,bodyexitcode);
  552. { set flag the implicit finally has been generated }
  553. include(flags,pi_has_implicit_finally);
  554. end
  555. else
  556. begin
  557. addstatement(newstatement,loadpara_asmnode);
  558. addstatement(newstatement,stackcheck_asmnode);
  559. addstatement(newstatement,entry_asmnode);
  560. addstatement(newstatement,init_asmnode);
  561. addstatement(newstatement,bodyentrycode);
  562. addstatement(newstatement,code);
  563. addstatement(newstatement,exitlabel_asmnode);
  564. addstatement(newstatement,bodyexitcode);
  565. addstatement(newstatement,final_asmnode);
  566. end;
  567. do_firstpass(newblock);
  568. code:=newblock;
  569. current_filepos:=oldfilepos;
  570. end;
  571. procedure clearrefs(p:TObject;arg:pointer);
  572. begin
  573. if (tsym(p).typ in [localvarsym,paravarsym,staticvarsym]) then
  574. if tabstractvarsym(p).refs>1 then
  575. tabstractvarsym(p).refs:=1;
  576. end;
  577. procedure translate_registers(p:TObject;list:pointer);
  578. begin
  579. if (tsym(p).typ in [localvarsym,paravarsym,staticvarsym]) and
  580. (tabstractnormalvarsym(p).localloc.loc in [LOC_REGISTER,LOC_CREGISTER,LOC_MMREGISTER,
  581. LOC_CMMREGISTER,LOC_FPUREGISTER,LOC_CFPUREGISTER]) then
  582. begin
  583. if not(cs_no_regalloc in current_settings.globalswitches) then
  584. cg.translate_register(tabstractnormalvarsym(p).localloc.register);
  585. if cs_asm_source in current_settings.globalswitches then
  586. TAsmList(list).concat(Tai_comment.Create(strpnew('Var '+tabstractnormalvarsym(p).realname+' located in register '+
  587. std_regname(tabstractnormalvarsym(p).localloc.register))))
  588. end;
  589. end;
  590. procedure check_for_stack(p:TObject;arg:pointer);
  591. begin
  592. if tsym(p).typ=paravarsym then
  593. begin
  594. { check if there no parameter of the current procedure is stack dependend }
  595. if is_open_array(tparavarsym(p).vardef) or
  596. is_array_of_const(tparavarsym(p).vardef) then
  597. pboolean(arg)^:=true;
  598. if assigned(p) and
  599. assigned(tparavarsym(p).paraloc[calleeside].location) and
  600. (tparavarsym(p).paraloc[calleeside].location^.loc=LOC_REFERENCE) then
  601. pboolean(arg)^:=true;
  602. end;
  603. end;
  604. function tcgprocinfo.stack_tainting_parameter : boolean;
  605. begin
  606. result:=false;
  607. procdef.parast.SymList.ForEachCall(@check_for_stack,@result);
  608. end;
  609. function tcgprocinfo.has_assembler_child : boolean;
  610. var
  611. hp : tcgprocinfo;
  612. begin
  613. result:=false;
  614. hp:=tcgprocinfo(nestedprocs.first);
  615. while assigned(hp) do
  616. begin
  617. if (hp.flags*[pi_has_assembler_block,pi_is_assembler])<>[] then
  618. begin
  619. result:=true;
  620. exit;
  621. end;
  622. hp:=tcgprocinfo(hp.next);
  623. end;
  624. end;
  625. procedure tcgprocinfo.generate_code;
  626. var
  627. oldprocinfo : tprocinfo;
  628. oldmaxfpuregisters : longint;
  629. oldfilepos : tfileposinfo;
  630. templist : TAsmList;
  631. headertai : tai;
  632. i : integer;
  633. varsym : tabstractnormalvarsym;
  634. begin
  635. { the initialization procedure can be empty, then we
  636. don't need to generate anything. When it was an empty
  637. procedure there would be at least a blocknode }
  638. if not assigned(code) then
  639. exit;
  640. { We need valid code }
  641. if Errorcount<>0 then
  642. exit;
  643. { No code can be generated for generic template }
  644. if (df_generic in procdef.defoptions) then
  645. internalerror(200511152);
  646. { The RA and Tempgen shall not be available yet }
  647. if assigned(tg) then
  648. internalerror(200309201);
  649. oldprocinfo:=current_procinfo;
  650. oldfilepos:=current_filepos;
  651. oldmaxfpuregisters:=current_settings.maxfpuregisters;
  652. current_procinfo:=self;
  653. current_filepos:=entrypos;
  654. templist:=TAsmList.create;
  655. { add parast/localst to symtablestack }
  656. add_to_symtablestack;
  657. { when size optimization only count occurrence }
  658. if cs_opt_size in current_settings.optimizerswitches then
  659. cg.t_times:=1
  660. else
  661. { reference for repetition is 100 }
  662. cg.t_times:=100;
  663. { clear register count }
  664. procdef.localst.SymList.ForEachCall(@clearrefs,nil);
  665. procdef.parast.SymList.ForEachCall(@clearrefs,nil);
  666. { there's always a call to FPC_INITIALIZEUNITS/FPC_DO_EXIT in the main program }
  667. if (procdef.localst.symtablelevel=main_program_level) and
  668. (not current_module.is_unit) then
  669. include(flags,pi_do_call);
  670. { set implicit_finally flag when there are locals/paras to be finalized }
  671. procdef.parast.SymList.ForEachCall(@check_finalize_paras,nil);
  672. procdef.localst.SymList.ForEachCall(@check_finalize_locals,nil);
  673. {$if defined(x86) or defined(arm)}
  674. { set implicit_finally flag for if procedure is safecall }
  675. if procdef.proccalloption=pocall_safecall then
  676. include(flags, pi_needs_implicit_finally);
  677. {$endif}
  678. { firstpass everything }
  679. flowcontrol:=[];
  680. do_firstpass(code);
  681. if code.registersfpu>0 then
  682. include(flags,pi_uses_fpu);
  683. { do this before adding the entry code else the tail recursion recognition won't work,
  684. if this causes troubles, it must be if'ed
  685. }
  686. if (cs_opt_tailrecursion in current_settings.optimizerswitches) and
  687. (pi_is_recursive in flags) then
  688. do_opttail(code,procdef);
  689. if (cs_opt_nodedfa in current_settings.optimizerswitches) and
  690. { creating dfa is not always possible }
  691. ((flags*[pi_has_assembler_block,pi_uses_exceptions,pi_is_assembler,
  692. pi_needs_implicit_finally,pi_has_implicit_finally,pi_has_stackparameter,
  693. pi_needs_stackframe])=[]) then
  694. begin
  695. dfabuilder:=TDFABuilder.Create;
  696. dfabuilder.createdfainfo(code);
  697. { when life info is available, we can give more sophisticated warning about unintialized
  698. variables }
  699. { iterate through life info of the first node }
  700. for i:=0 to dfabuilder.nodemap.count-1 do
  701. begin
  702. if DFASetIn(code.optinfo^.life,i) then
  703. case tnode(dfabuilder.nodemap[i]).nodetype of
  704. loadn:
  705. begin
  706. varsym:=tabstractnormalvarsym(tloadnode(dfabuilder.nodemap[i]).symtableentry);
  707. { Give warning/note for living locals }
  708. if assigned(varsym.owner) and
  709. not(vo_is_external in varsym.varoptions) then
  710. begin
  711. if (vo_is_funcret in varsym.varoptions) then
  712. CGMessage(sym_w_function_result_uninitialized)
  713. else
  714. begin
  715. if varsym.owner=procdef.localst then
  716. CGMessage1(sym_w_uninitialized_local_variable,varsym.realname);
  717. end;
  718. end;
  719. end;
  720. end;
  721. end;
  722. end;
  723. if cs_opt_nodecse in current_settings.optimizerswitches then
  724. do_optcse(code);
  725. { add implicit entry and exit code }
  726. add_entry_exit_code;
  727. { only do secondpass if there are no errors }
  728. if (ErrorCount=0) then
  729. begin
  730. { set the start offset to the start of the temp area in the stack }
  731. tg:=ttgobj.create;
  732. {$if defined(x86) or defined(arm)}
  733. { try to strip the stack frame }
  734. { set the framepointer to esp if:
  735. - no assembler directive, those are handled in assembler_block
  736. in pstatment.pas (for cases not caught by the Delphi
  737. exception below)
  738. - no exceptions are used
  739. - no debug info
  740. - no pushes are used/esp modifications, could be:
  741. * outgoing parameters on the stack
  742. * incoming parameters on the stack
  743. * open arrays
  744. - no inline assembler
  745. or
  746. - Delphi mode
  747. - assembler directive
  748. - no pushes are used/esp modifications, could be:
  749. * outgoing parameters on the stack
  750. * incoming parameters on the stack
  751. * open arrays
  752. - no local variables
  753. }
  754. if ((po_assembler in procdef.procoptions) and
  755. (m_delphi in current_settings.modeswitches) and
  756. { localst at main_program_level is a staticsymtable }
  757. (procdef.localst.symtablelevel<>main_program_level) and
  758. (tabstractlocalsymtable(procdef.localst).count_locals = 0)) or
  759. ((cs_opt_stackframe in current_settings.optimizerswitches) and
  760. not(cs_generate_stackframes in current_settings.localswitches) and
  761. not(po_assembler in procdef.procoptions) and
  762. ((flags*[pi_has_assembler_block,pi_uses_exceptions,pi_is_assembler,
  763. pi_needs_implicit_finally,pi_has_implicit_finally,pi_has_stackparameter,
  764. pi_needs_stackframe])=[])
  765. )
  766. then
  767. begin
  768. { we need the parameter info here to determine if the procedure gets
  769. parameters on the stack
  770. calling generate_parameter_info doesn't hurt but it costs time
  771. }
  772. generate_parameter_info;
  773. if not(stack_tainting_parameter) and
  774. not(has_assembler_child) and (para_stack_size=0) then
  775. begin
  776. { Only need to set the framepointer }
  777. framepointer:=NR_STACK_POINTER_REG;
  778. tg.direction:=1;
  779. end;
  780. end;
  781. {$endif}
  782. { Create register allocator }
  783. cg.init_register_allocators;
  784. set_first_temp_offset;
  785. generate_parameter_info;
  786. { Allocate space in temp/registers for parast and localst }
  787. current_filepos:=entrypos;
  788. gen_alloc_symtable(aktproccode,procdef.parast);
  789. gen_alloc_symtable(aktproccode,procdef.localst);
  790. { Store temp offset for information about 'real' temps }
  791. tempstart:=tg.lasttemp;
  792. { Generate code to load register parameters in temps and insert local
  793. copies for values parameters. This must be done before the code for the
  794. body is generated because the localloc is updated.
  795. Note: The generated code will be inserted after the code generation of
  796. the body is finished, because only then the position is known }
  797. {$ifdef oldregvars}
  798. assign_regvars(code);
  799. {$endif oldreg}
  800. current_filepos:=entrypos;
  801. { record which registers are allocated here, since all code }
  802. { allocating registers comes after it }
  803. cg.set_regalloc_extend_backwards(true);
  804. gen_load_para_value(templist);
  805. cg.set_regalloc_extend_backwards(false);
  806. { caller paraloc info is also necessary in the stackframe_entry
  807. code of the ppc (and possibly other processors) }
  808. if not procdef.has_paraloc_info then
  809. begin
  810. procdef.requiredargarea:=paramanager.create_paraloc_info(procdef,callerside);
  811. procdef.has_paraloc_info:=true;
  812. end;
  813. { generate code for the node tree }
  814. do_secondpass(code);
  815. aktproccode.concatlist(current_asmdata.CurrAsmList);
  816. {$ifdef i386}
  817. procdef.fpu_used:=code.registersfpu;
  818. {$endif i386}
  819. { The position of the loadpara_asmnode is now known }
  820. aktproccode.insertlistafter(loadpara_asmnode.currenttai,templist);
  821. { first generate entry and initialize code with the correct
  822. position and switches }
  823. current_filepos:=entrypos;
  824. current_settings.localswitches:=entryswitches;
  825. cg.set_regalloc_extend_backwards(true);
  826. gen_entry_code(templist);
  827. aktproccode.insertlistafter(entry_asmnode.currenttai,templist);
  828. gen_initialize_code(templist);
  829. aktproccode.insertlistafter(init_asmnode.currenttai,templist);
  830. { now generate finalize and exit code with the correct position
  831. and switches }
  832. current_filepos:=exitpos;
  833. current_settings.localswitches:=exitswitches;
  834. cg.set_regalloc_extend_backwards(false);
  835. gen_finalize_code(templist);
  836. { the finalcode must be concated if there was no position available,
  837. using insertlistafter will result in an insert at the start
  838. when currentai=nil }
  839. if assigned(final_asmnode.currenttai) then
  840. aktproccode.insertlistafter(final_asmnode.currenttai,templist)
  841. else
  842. aktproccode.concatlist(templist);
  843. { insert exit label at the correct position }
  844. cg.a_label(templist,CurrExitLabel);
  845. if assigned(exitlabel_asmnode.currenttai) then
  846. aktproccode.insertlistafter(exitlabel_asmnode.currenttai,templist)
  847. else
  848. aktproccode.concatlist(templist);
  849. { exit code }
  850. gen_exit_code(templist);
  851. aktproccode.concatlist(templist);
  852. {$ifdef OLDREGVARS}
  853. { note: this must be done only after as much code as possible has }
  854. { been generated. The result is that when you ungetregister() a }
  855. { regvar, it will actually free the regvar (and alse free the }
  856. { the regvars at the same time). Doing this too early will }
  857. { confuse the register allocator, as the regvars will still be }
  858. { used. It should be done before loading the result regs (so }
  859. { they don't conflict with the regvars) and before }
  860. { gen_entry_code (that one has to be able to allocate the }
  861. { regvars again) (JM) }
  862. free_regvars(aktproccode);
  863. {$endif OLDREGVARS}
  864. { generate symbol and save end of header position }
  865. current_filepos:=entrypos;
  866. gen_proc_symbol(templist);
  867. headertai:=tai(templist.last);
  868. { insert symbol }
  869. aktproccode.insertlist(templist);
  870. { Free space in temp/registers for parast and localst, must be
  871. done after gen_entry_code }
  872. current_filepos:=exitpos;
  873. gen_free_symtable(aktproccode,procdef.localst);
  874. gen_free_symtable(aktproccode,procdef.parast);
  875. { add code that will load the return value, this is not done
  876. for assembler routines when they didn't reference the result
  877. variable }
  878. gen_load_return_value(templist);
  879. aktproccode.concatlist(templist);
  880. { Already reserve all registers for stack checking code and
  881. generate the call to the helper function }
  882. if (cs_check_stack in entryswitches) and
  883. not(po_assembler in procdef.procoptions) and
  884. (procdef.proctypeoption<>potype_proginit) then
  885. begin
  886. current_filepos:=entrypos;
  887. gen_stack_check_call(templist);
  888. aktproccode.insertlistafter(stackcheck_asmnode.currenttai,templist)
  889. end;
  890. { load got if necessary }
  891. cg.set_regalloc_extend_backwards(true);
  892. current_filepos:=entrypos;
  893. gen_got_load(templist);
  894. aktproccode.insertlistafter(headertai,templist);
  895. cg.set_regalloc_extend_backwards(false);
  896. { The procedure body is finished, we can now
  897. allocate the registers }
  898. cg.do_register_allocation(aktproccode,headertai);
  899. { translate imag. register to their real counter parts
  900. this is necessary for debuginfo and verbose assembler output
  901. when SSA will be implented, this will be more complicated because we've to
  902. maintain location lists }
  903. current_procinfo.procdef.parast.SymList.ForEachCall(@translate_registers,templist);
  904. current_procinfo.procdef.localst.SymList.ForEachCall(@translate_registers,templist);
  905. { Add save and restore of used registers }
  906. current_filepos:=entrypos;
  907. gen_save_used_regs(templist);
  908. aktproccode.insertlistafter(headertai,templist);
  909. current_filepos:=exitpos;
  910. gen_restore_used_regs(aktproccode);
  911. { We know the size of the stack, now we can generate the
  912. parameter that is passed to the stack checking code }
  913. if (cs_check_stack in entryswitches) and
  914. not(po_assembler in procdef.procoptions) and
  915. (procdef.proctypeoption<>potype_proginit) then
  916. begin
  917. current_filepos:=entrypos;
  918. gen_stack_check_size_para(templist);
  919. aktproccode.insertlistafter(stackcheck_asmnode.currenttai,templist)
  920. end;
  921. { Add entry code (stack allocation) after header }
  922. current_filepos:=entrypos;
  923. gen_proc_entry_code(templist);
  924. aktproccode.insertlistafter(headertai,templist);
  925. {$if defined(x86) or defined(arm)}
  926. { Set return value of safecall procedure if implicit try/finally blocks are disabled }
  927. if not (cs_implicit_exceptions in current_settings.moduleswitches) and
  928. (procdef.proccalloption=pocall_safecall) then
  929. cg.a_load_const_reg(aktproccode,OS_ADDR,0,NR_FUNCTION_RETURN_REG);
  930. {$endif}
  931. { Add exit code at the end }
  932. current_filepos:=exitpos;
  933. gen_proc_exit_code(templist);
  934. aktproccode.concatlist(templist);
  935. { check if the implicit finally has been generated. The flag
  936. should already be set in pass1 }
  937. if (cs_implicit_exceptions in current_settings.moduleswitches) and
  938. not(procdef.proctypeoption in [potype_unitfinalize,potype_unitinit]) and
  939. (pi_needs_implicit_finally in flags) and
  940. not(pi_has_implicit_finally in flags) then
  941. internalerror(200405231);
  942. {$ifndef NoOpt}
  943. if not(cs_no_regalloc in current_settings.globalswitches) then
  944. begin
  945. if (cs_opt_level1 in current_settings.optimizerswitches) and
  946. { do not optimize pure assembler procedures }
  947. not(pi_is_assembler in flags) then
  948. optimize(aktproccode);
  949. end;
  950. {$endif NoOpt}
  951. {$ifdef ARM}
  952. { because of the limited constant size of the arm, all data access is done pc relative }
  953. insertpcrelativedata(aktproccode,aktlocaldata);
  954. {$endif ARM}
  955. { Add end symbol and debug info }
  956. { this must be done after the pcrelativedata is appended else the distance calculation of
  957. insertpcrelativedata will be wrong, further the pc indirect data is part of the procedure
  958. so it should be inserted before the end symbol (FK)
  959. }
  960. current_filepos:=exitpos;
  961. gen_proc_symbol_end(templist);
  962. aktproccode.concatlist(templist);
  963. {$if defined(POWERPC) or defined(POWERPC64)}
  964. fixup_jmps(aktproccode);
  965. {$endif}
  966. { insert line debuginfo }
  967. if (cs_debuginfo in current_settings.moduleswitches) or
  968. (cs_use_lineinfo in current_settings.globalswitches) then
  969. debuginfo.insertlineinfo(aktproccode);
  970. { add the procedure to the al_procedures }
  971. maybe_new_object_file(current_asmdata.asmlists[al_procedures]);
  972. new_section(current_asmdata.asmlists[al_procedures],sec_code,lower(procdef.mangledname),getprocalign);
  973. current_asmdata.asmlists[al_procedures].concatlist(aktproccode);
  974. { save local data (casetable) also in the same file }
  975. if assigned(aktlocaldata) and
  976. (not aktlocaldata.empty) then
  977. current_asmdata.asmlists[al_procedures].concatlist(aktlocaldata);
  978. { only now we can remove the temps }
  979. tg.resettempgen;
  980. { stop tempgen and ra }
  981. tg.free;
  982. cg.done_register_allocators;
  983. tg:=nil;
  984. end;
  985. dfabuilder.free;
  986. { restore symtablestack }
  987. remove_from_symtablestack;
  988. { restore }
  989. templist.free;
  990. current_settings.maxfpuregisters:=oldmaxfpuregisters;
  991. current_filepos:=oldfilepos;
  992. current_procinfo:=oldprocinfo;
  993. end;
  994. procedure tcgprocinfo.add_to_symtablestack;
  995. var
  996. _class,hp : tobjectdef;
  997. begin
  998. { insert symtables for the class, but only if it is no nested function }
  999. if assigned(procdef._class) and
  1000. not(assigned(parent) and
  1001. assigned(parent.procdef) and
  1002. assigned(parent.procdef._class)) then
  1003. begin
  1004. { insert them in the reverse order }
  1005. hp:=nil;
  1006. repeat
  1007. _class:=procdef._class;
  1008. while _class.childof<>hp do
  1009. _class:=_class.childof;
  1010. hp:=_class;
  1011. symtablestack.push(_class.symtable);
  1012. until hp=procdef._class;
  1013. end;
  1014. { insert parasymtable in symtablestack when parsing
  1015. a function }
  1016. if procdef.parast.symtablelevel>=normal_function_level then
  1017. symtablestack.push(procdef.parast);
  1018. { insert localsymtable }
  1019. symtablestack.push(procdef.localst);
  1020. end;
  1021. procedure tcgprocinfo.remove_from_symtablestack;
  1022. var
  1023. _class : tobjectdef;
  1024. begin
  1025. { remove localsymtable }
  1026. symtablestack.pop(procdef.localst);
  1027. { remove parasymtable }
  1028. if procdef.parast.symtablelevel>=normal_function_level then
  1029. symtablestack.pop(procdef.parast);
  1030. { remove symtables for the class, but only if it is no nested function }
  1031. if assigned(procdef._class) and
  1032. not(assigned(parent) and
  1033. assigned(parent.procdef) and
  1034. assigned(parent.procdef._class)) then
  1035. begin
  1036. _class:=procdef._class;
  1037. while assigned(_class) do
  1038. begin
  1039. symtablestack.pop(_class.symtable);
  1040. _class:=_class.childof;
  1041. end;
  1042. end;
  1043. end;
  1044. procedure tcgprocinfo.resetprocdef;
  1045. begin
  1046. { remove code tree, if not inline procedure }
  1047. if assigned(code) then
  1048. begin
  1049. { the inline procedure has already got a copy of the tree
  1050. stored in procdef.inlininginfo }
  1051. code.free;
  1052. code:=nil;
  1053. end;
  1054. end;
  1055. function checknodeinlining(procdef: tprocdef): boolean;
  1056. var
  1057. i : integer;
  1058. currpara : tparavarsym;
  1059. begin
  1060. result := false;
  1061. if (pi_has_assembler_block in current_procinfo.flags) then
  1062. exit;
  1063. for i:=0 to procdef.paras.count-1 do
  1064. begin
  1065. currpara:=tparavarsym(procdef.paras[i]);
  1066. { we can't handle formaldefs and special arrays (the latter may need a }
  1067. { re-basing of the index, i.e. if you pass an array[1..10] as open array, }
  1068. { you have to add 1 to all index operations if you directly inline it }
  1069. if ((currpara.varspez in [vs_out,vs_var,vs_const]) and
  1070. (currpara.vardef.typ=formaldef)) or
  1071. is_special_array(currpara.vardef) then
  1072. exit;
  1073. end;
  1074. result:=true;
  1075. end;
  1076. procedure tcgprocinfo.parse_body;
  1077. var
  1078. oldprocinfo : tprocinfo;
  1079. oldblock_type : tblock_type;
  1080. st : TSymtable;
  1081. begin
  1082. oldprocinfo:=current_procinfo;
  1083. oldblock_type:=block_type;
  1084. { reset break and continue labels }
  1085. block_type:=bt_body;
  1086. current_procinfo:=self;
  1087. { calculate the lexical level }
  1088. if procdef.parast.symtablelevel>maxnesting then
  1089. Message(parser_e_too_much_lexlevel);
  1090. {$ifdef state_tracking}
  1091. { aktstate:=Tstate_storage.create;}
  1092. {$endif state_tracking}
  1093. { allocate the symbol for this procedure }
  1094. alloc_proc_symbol(procdef);
  1095. { add parast/localst to symtablestack }
  1096. add_to_symtablestack;
  1097. { save entry info }
  1098. entrypos:=current_filepos;
  1099. entryswitches:=current_settings.localswitches;
  1100. if (df_generic in procdef.defoptions) then
  1101. begin
  1102. { start token recorder for generic template }
  1103. procdef.initgeneric;
  1104. current_scanner.startrecordtokens(procdef.generictokenbuf);
  1105. end;
  1106. { parse the code ... }
  1107. code:=block(current_module.islibrary);
  1108. if (df_generic in procdef.defoptions) then
  1109. begin
  1110. { stop token recorder for generic template }
  1111. current_scanner.stoprecordtokens;
  1112. { Give a warning for accesses in the static symtable that aren't visible
  1113. outside the current unit }
  1114. st:=procdef.owner;
  1115. while (st.symtabletype=ObjectSymtable) do
  1116. st:=st.defowner.owner;
  1117. if (pi_uses_static_symtable in flags) and
  1118. (st.symtabletype<>staticsymtable) then
  1119. Comment(V_Warning,'Global Generic template references static symtable');
  1120. end;
  1121. { save exit info }
  1122. exitswitches:=current_settings.localswitches;
  1123. exitpos:=last_endtoken_filepos;
  1124. { the procedure is now defined }
  1125. procdef.forwarddef:=false;
  1126. if assigned(code) then
  1127. begin
  1128. { get a better entry point }
  1129. entrypos:=code.fileinfo;
  1130. { Finish type checking pass }
  1131. do_typecheckpass(code);
  1132. end;
  1133. { Check for unused labels, forwards, symbols for procedures. Static
  1134. symtable is checked in pmodules.
  1135. The check must be done after the typecheckpass }
  1136. if (Errorcount=0) and
  1137. (tstoredsymtable(procdef.localst).symtabletype<>staticsymtable) then
  1138. begin
  1139. { check if forwards are resolved }
  1140. tstoredsymtable(procdef.localst).check_forwards;
  1141. { check if all labels are used }
  1142. tstoredsymtable(procdef.localst).checklabels;
  1143. { remove cross unit overloads }
  1144. tstoredsymtable(procdef.localst).unchain_overloaded;
  1145. { check for unused symbols, but only if there is no asm block }
  1146. if not(pi_has_assembler_block in flags) then
  1147. begin
  1148. tstoredsymtable(procdef.localst).allsymbolsused;
  1149. tstoredsymtable(procdef.parast).allsymbolsused;
  1150. end;
  1151. end;
  1152. if (po_inline in procdef.procoptions) then
  1153. begin
  1154. { Can we inline this procedure? }
  1155. if checknodeinlining(procdef) then
  1156. begin
  1157. new(procdef.inlininginfo);
  1158. include(procdef.procoptions,po_has_inlininginfo);
  1159. procdef.inlininginfo^.code:=code.getcopy;
  1160. procdef.inlininginfo^.flags:=current_procinfo.flags;
  1161. { The blocknode needs to set an exit label }
  1162. if procdef.inlininginfo^.code.nodetype=blockn then
  1163. include(procdef.inlininginfo^.code.flags,nf_block_with_exit);
  1164. end;
  1165. end;
  1166. { Print the node to tree.log }
  1167. if paraprintnodetree=1 then
  1168. printproc;
  1169. { ... remove symbol tables }
  1170. remove_from_symtablestack;
  1171. {$ifdef state_tracking}
  1172. { aktstate.destroy;}
  1173. {$endif state_tracking}
  1174. current_procinfo:=oldprocinfo;
  1175. { Restore old state }
  1176. block_type:=oldblock_type;
  1177. end;
  1178. {****************************************************************************
  1179. PROCEDURE/FUNCTION PARSING
  1180. ****************************************************************************}
  1181. procedure check_init_paras(p:TObject;arg:pointer);
  1182. begin
  1183. if tsym(p).typ<>paravarsym then
  1184. exit;
  1185. with tparavarsym(p) do
  1186. if (not is_class(vardef) and
  1187. vardef.needs_inittable and
  1188. (varspez in [vs_value,vs_out])) then
  1189. include(current_procinfo.flags,pi_do_call);
  1190. end;
  1191. procedure read_proc_body(old_current_procinfo:tprocinfo;pd:tprocdef);
  1192. {
  1193. Parses the procedure directives, then parses the procedure body, then
  1194. generates the code for it
  1195. }
  1196. procedure do_generate_code(pi:tcgprocinfo);
  1197. var
  1198. hpi : tcgprocinfo;
  1199. begin
  1200. { generate code for this procedure }
  1201. pi.generate_code;
  1202. { process nested procs }
  1203. hpi:=tcgprocinfo(pi.nestedprocs.first);
  1204. while assigned(hpi) do
  1205. begin
  1206. do_generate_code(hpi);
  1207. hpi:=tcgprocinfo(hpi.next);
  1208. end;
  1209. pi.resetprocdef;
  1210. end;
  1211. var
  1212. oldfailtokenmode : tmodeswitch;
  1213. isnestedproc : boolean;
  1214. begin
  1215. Message1(parser_d_procedure_start,pd.fullprocname(false));
  1216. { create a new procedure }
  1217. current_procinfo:=cprocinfo.create(old_current_procinfo);
  1218. current_module.procinfo:=current_procinfo;
  1219. current_procinfo.procdef:=pd;
  1220. isnestedproc:=(current_procinfo.procdef.parast.symtablelevel>normal_function_level);
  1221. { Insert mangledname }
  1222. pd.aliasnames.insert(pd.mangledname);
  1223. { Handle Export of this procedure }
  1224. if (po_exports in pd.procoptions) and
  1225. (target_info.system in [system_i386_os2,system_i386_emx]) then
  1226. begin
  1227. pd.aliasnames.insert(pd.procsym.realname);
  1228. if cs_link_deffile in current_settings.globalswitches then
  1229. deffile.AddExport(pd.mangledname);
  1230. end;
  1231. { Insert result variables in the localst }
  1232. insert_funcret_local(pd);
  1233. { check if there are para's which require initing -> set }
  1234. { pi_do_call (if not yet set) }
  1235. if not(pi_do_call in current_procinfo.flags) then
  1236. pd.parast.SymList.ForEachCall(@check_init_paras,nil);
  1237. { set _FAIL as keyword if constructor }
  1238. if (pd.proctypeoption=potype_constructor) then
  1239. begin
  1240. oldfailtokenmode:=tokeninfo^[_FAIL].keyword;
  1241. tokeninfo^[_FAIL].keyword:=m_all;
  1242. end;
  1243. tcgprocinfo(current_procinfo).parse_body;
  1244. { When it's a nested procedure then defer the code generation,
  1245. when back at normal function level then generate the code
  1246. for all defered nested procedures and the current procedure }
  1247. if isnestedproc then
  1248. tcgprocinfo(current_procinfo.parent).nestedprocs.insert(current_procinfo)
  1249. else
  1250. begin
  1251. { We can't support inlining for procedures that have nested
  1252. procedures because the nested procedures use a fixed offset
  1253. for accessing locals in the parent procedure (PFV) }
  1254. if (tcgprocinfo(current_procinfo).nestedprocs.count>0) then
  1255. begin
  1256. if (df_generic in current_procinfo.procdef.defoptions) then
  1257. Comment(V_Error,'Generic methods cannot have nested procedures')
  1258. else
  1259. if (po_inline in current_procinfo.procdef.procoptions) then
  1260. begin
  1261. Message1(parser_w_not_supported_for_inline,'nested procedures');
  1262. Message(parser_w_inlining_disabled);
  1263. current_procinfo.procdef.proccalloption:=pocall_default;
  1264. end;
  1265. end;
  1266. if not(df_generic in current_procinfo.procdef.defoptions) then
  1267. do_generate_code(tcgprocinfo(current_procinfo));
  1268. end;
  1269. { reset _FAIL as _SELF normal }
  1270. if (pd.proctypeoption=potype_constructor) then
  1271. tokeninfo^[_FAIL].keyword:=oldfailtokenmode;
  1272. { release procinfo }
  1273. if tprocinfo(current_module.procinfo)<>current_procinfo then
  1274. internalerror(200304274);
  1275. current_module.procinfo:=current_procinfo.parent;
  1276. { For specialization we didn't record the last semicolon. Moving this parsing
  1277. into the parse_body routine is not done because of having better file position
  1278. information available }
  1279. if not(df_specialization in current_procinfo.procdef.defoptions) then
  1280. consume(_SEMICOLON);
  1281. if not isnestedproc then
  1282. { current_procinfo is checked for nil later on }
  1283. freeandnil(current_procinfo);
  1284. end;
  1285. procedure read_proc;
  1286. {
  1287. Parses the procedure directives, then parses the procedure body, then
  1288. generates the code for it
  1289. }
  1290. procedure do_generate_code(pi:tcgprocinfo);
  1291. var
  1292. hpi : tcgprocinfo;
  1293. begin
  1294. { generate code for this procedure }
  1295. pi.generate_code;
  1296. { process nested procs }
  1297. hpi:=tcgprocinfo(pi.nestedprocs.first);
  1298. while assigned(hpi) do
  1299. begin
  1300. do_generate_code(hpi);
  1301. hpi:=tcgprocinfo(hpi.next);
  1302. end;
  1303. pi.resetprocdef;
  1304. end;
  1305. var
  1306. old_current_procinfo : tprocinfo;
  1307. pdflags : tpdflags;
  1308. pd,firstpd : tprocdef;
  1309. s : string;
  1310. begin
  1311. { save old state }
  1312. old_current_procinfo:=current_procinfo;
  1313. { reset current_procinfo.procdef to nil to be sure that nothing is writing
  1314. to an other procdef }
  1315. current_procinfo:=nil;
  1316. { parse procedure declaration }
  1317. if assigned(old_current_procinfo) and
  1318. assigned(old_current_procinfo.procdef) then
  1319. pd:=parse_proc_dec(old_current_procinfo.procdef._class)
  1320. else
  1321. pd:=parse_proc_dec(nil);
  1322. { set the default function options }
  1323. if parse_only then
  1324. begin
  1325. pd.forwarddef:=true;
  1326. { set also the interface flag, for better error message when the
  1327. implementation doesn't much this header }
  1328. pd.interfacedef:=true;
  1329. include(pd.procoptions,po_global);
  1330. pdflags:=[pd_interface];
  1331. end
  1332. else
  1333. begin
  1334. pdflags:=[pd_body];
  1335. if (not current_module.in_interface) then
  1336. include(pdflags,pd_implemen);
  1337. if (not current_module.is_unit) or
  1338. maybe_smartlink_symbol or
  1339. {
  1340. taking addresses of static procedures goes wrong
  1341. if they aren't global when pic is used (FK)
  1342. }
  1343. (cs_create_pic in current_settings.moduleswitches) then
  1344. include(pd.procoptions,po_global);
  1345. pd.forwarddef:=false;
  1346. end;
  1347. { parse the directives that may follow }
  1348. parse_proc_directives(pd,pdflags);
  1349. { hint directives, these can be separated by semicolons here,
  1350. that needs to be handled here with a loop (PFV) }
  1351. while try_consume_hintdirective(pd.symoptions) do
  1352. Consume(_SEMICOLON);
  1353. { Set calling convention }
  1354. handle_calling_convention(pd);
  1355. { search for forward declarations }
  1356. if not proc_add_definition(pd) then
  1357. begin
  1358. { A method must be forward defined (in the object declaration) }
  1359. if assigned(pd._class) and
  1360. (not assigned(old_current_procinfo.procdef._class)) then
  1361. begin
  1362. MessagePos1(pd.fileinfo,parser_e_header_dont_match_any_member,pd.fullprocname(false));
  1363. tprocsym(pd.procsym).write_parameter_lists(pd);
  1364. end
  1365. else
  1366. begin
  1367. { Give a better error if there is a forward def in the interface and only
  1368. a single implementation }
  1369. firstpd:=tprocdef(tprocsym(pd.procsym).ProcdefList[0]);
  1370. if (not pd.forwarddef) and
  1371. (not pd.interfacedef) and
  1372. (tprocsym(pd.procsym).ProcdefList.Count>1) and
  1373. firstpd.forwarddef and
  1374. firstpd.interfacedef and
  1375. not(tprocsym(pd.procsym).ProcdefList.Count>2) and
  1376. { don't give an error if it may be an overload }
  1377. not(m_fpc in current_settings.modeswitches) and
  1378. (not(po_overload in pd.procoptions) or
  1379. not(po_overload in firstpd.procoptions)) then
  1380. begin
  1381. MessagePos1(pd.fileinfo,parser_e_header_dont_match_forward,pd.fullprocname(false));
  1382. tprocsym(pd.procsym).write_parameter_lists(pd);
  1383. end;
  1384. end;
  1385. end;
  1386. { Set mangled name }
  1387. proc_set_mangledname(pd);
  1388. { compile procedure when a body is needed }
  1389. if (pd_body in pdflags) then
  1390. begin
  1391. read_proc_body(old_current_procinfo,pd);
  1392. end
  1393. else
  1394. begin
  1395. { Handle imports }
  1396. if (po_external in pd.procoptions) then
  1397. begin
  1398. { External declared in implementation, and there was already a
  1399. forward (or interface) declaration then we need to generate
  1400. a stub that calls the external routine }
  1401. if (not pd.forwarddef) and
  1402. (pd.hasforward) and
  1403. not(
  1404. assigned(pd.import_dll) and
  1405. (target_info.system in [system_i386_wdosx,
  1406. system_arm_wince,system_i386_wince])
  1407. ) then
  1408. begin
  1409. s:=proc_get_importname(pd);
  1410. if s<>'' then
  1411. gen_external_stub(current_asmdata.asmlists[al_procedures],pd,{$IFDEF POWERPC64}'.'+{$ENDIF}s);
  1412. end;
  1413. { Import DLL specified? }
  1414. if assigned(pd.import_dll) then
  1415. current_module.AddExternalImport(pd.import_dll^,proc_get_importname(pd),pd.import_nr,false)
  1416. else
  1417. begin
  1418. { add import name to external list for DLL scanning }
  1419. if tf_has_dllscanner in target_info.flags then
  1420. current_module.dllscannerinputlist.Add(proc_get_importname(pd),pd);
  1421. end;
  1422. end;
  1423. end;
  1424. { make sure that references to forward-declared functions are not }
  1425. { treated as references to external symbols, needed for darwin. }
  1426. { make sure we don't change the binding of real external symbols }
  1427. if not(po_external in pd.procoptions) then
  1428. begin
  1429. if (po_global in pd.procoptions) or
  1430. (cs_profile in current_settings.moduleswitches) then
  1431. current_asmdata.DefineAsmSymbol(pd.mangledname,AB_GLOBAL,AT_FUNCTION)
  1432. else
  1433. current_asmdata.DefineAsmSymbol(pd.mangledname,AB_LOCAL,AT_FUNCTION);
  1434. end;
  1435. current_procinfo:=old_current_procinfo;
  1436. end;
  1437. {****************************************************************************
  1438. DECLARATION PARSING
  1439. ****************************************************************************}
  1440. { search in symtablestack for not complete classes }
  1441. procedure check_forward_class(p:TObject;arg:pointer);
  1442. begin
  1443. if (tsym(p).typ=typesym) and
  1444. (ttypesym(p).typedef.typ=objectdef) and
  1445. (oo_is_forward in tobjectdef(ttypesym(p).typedef).objectoptions) then
  1446. MessagePos1(tsym(p).fileinfo,sym_e_forward_type_not_resolved,tsym(p).realname);
  1447. end;
  1448. procedure read_declarations(islibrary : boolean);
  1449. begin
  1450. repeat
  1451. if not assigned(current_procinfo) then
  1452. internalerror(200304251);
  1453. case token of
  1454. _LABEL:
  1455. label_dec;
  1456. _CONST:
  1457. const_dec;
  1458. _TYPE:
  1459. type_dec;
  1460. _VAR:
  1461. var_dec;
  1462. _THREADVAR:
  1463. threadvar_dec;
  1464. _CONSTRUCTOR,
  1465. _DESTRUCTOR,
  1466. _FUNCTION,
  1467. _PROCEDURE,
  1468. _OPERATOR,
  1469. _CLASS:
  1470. read_proc;
  1471. _EXPORTS:
  1472. begin
  1473. if (current_procinfo.procdef.localst.symtablelevel>main_program_level) then
  1474. begin
  1475. Message(parser_e_syntax_error);
  1476. consume_all_until(_SEMICOLON);
  1477. end
  1478. else if islibrary or
  1479. (target_info.system in system_unit_program_exports) then
  1480. read_exports
  1481. else
  1482. begin
  1483. Message(parser_w_unsupported_feature);
  1484. consume(_BEGIN);
  1485. end;
  1486. end
  1487. else
  1488. begin
  1489. case idtoken of
  1490. _RESOURCESTRING :
  1491. begin
  1492. { m_class is needed, because the resourcestring
  1493. loading is in the ObjPas unit }
  1494. { if (m_class in current_settings.modeswitches) then}
  1495. resourcestring_dec
  1496. { else
  1497. break;}
  1498. end;
  1499. _PROPERTY:
  1500. begin
  1501. if (m_fpc in current_settings.modeswitches) then
  1502. property_dec
  1503. else
  1504. break;
  1505. end;
  1506. else
  1507. break;
  1508. end;
  1509. end;
  1510. end;
  1511. until false;
  1512. { check for incomplete class definitions, this is only required
  1513. for fpc modes }
  1514. if (m_fpc in current_settings.modeswitches) then
  1515. current_procinfo.procdef.localst.SymList.ForEachCall(@check_forward_class,nil);
  1516. end;
  1517. procedure read_interface_declarations;
  1518. begin
  1519. repeat
  1520. case token of
  1521. _CONST :
  1522. const_dec;
  1523. _TYPE :
  1524. type_dec;
  1525. _VAR :
  1526. var_dec;
  1527. _THREADVAR :
  1528. threadvar_dec;
  1529. _FUNCTION,
  1530. _PROCEDURE,
  1531. _OPERATOR :
  1532. read_proc;
  1533. else
  1534. begin
  1535. case idtoken of
  1536. _RESOURCESTRING :
  1537. resourcestring_dec;
  1538. _PROPERTY:
  1539. begin
  1540. if (m_fpc in current_settings.modeswitches) then
  1541. property_dec
  1542. else
  1543. break;
  1544. end;
  1545. else
  1546. break;
  1547. end;
  1548. end;
  1549. end;
  1550. until false;
  1551. { check for incomplete class definitions, this is only required
  1552. for fpc modes }
  1553. if (m_fpc in current_settings.modeswitches) then
  1554. symtablestack.top.SymList.ForEachCall(@check_forward_class,nil);
  1555. end;
  1556. {****************************************************************************
  1557. SPECIALIZATION BODY GENERATION
  1558. ****************************************************************************}
  1559. procedure specialize_objectdefs(p:TObject;arg:pointer);
  1560. function find_module_from_symtable(st:tsymtable):tmodule;
  1561. var
  1562. hp : tmodule;
  1563. begin
  1564. result:=nil;
  1565. hp:=tmodule(loaded_units.first);
  1566. while assigned(hp) do
  1567. begin
  1568. if (hp.globalsymtable=st) or
  1569. (hp.localsymtable=st) then
  1570. begin
  1571. result:=hp;
  1572. exit;
  1573. end;
  1574. hp:=tmodule(hp.next);
  1575. end;
  1576. end;
  1577. var
  1578. i : longint;
  1579. hp : tdef;
  1580. oldcurrent_filepos : tfileposinfo;
  1581. oldsymtablestack : tsymtablestack;
  1582. pu : tused_unit;
  1583. hmodule : tmodule;
  1584. begin
  1585. if not((tsym(p).typ=typesym) and
  1586. (ttypesym(p).typedef.typ=objectdef) and
  1587. (df_specialization in ttypesym(p).typedef.defoptions)
  1588. ) then
  1589. exit;
  1590. { Setup symtablestack a definition time }
  1591. oldsymtablestack:=symtablestack;
  1592. symtablestack:=tsymtablestack.create;
  1593. if not assigned(tobjectdef(ttypesym(p).typedef).genericdef) then
  1594. internalerror(200705151);
  1595. hmodule:=find_module_from_symtable(tobjectdef(ttypesym(p).typedef).genericdef.owner);
  1596. if hmodule=nil then
  1597. internalerror(200705152);
  1598. pu:=tused_unit(hmodule.used_units.first);
  1599. while assigned(pu) do
  1600. begin
  1601. if not assigned(pu.u.globalsymtable) then
  1602. internalerror(200705153);
  1603. symtablestack.push(pu.u.globalsymtable);
  1604. pu:=tused_unit(pu.next);
  1605. end;
  1606. if assigned(hmodule.globalsymtable) then
  1607. symtablestack.push(hmodule.globalsymtable);
  1608. if assigned(hmodule.localsymtable) then
  1609. symtablestack.push(hmodule.localsymtable);
  1610. { definitions }
  1611. for i:=0 to tobjectdef(ttypesym(p).typedef).symtable.DefList.Count-1 do
  1612. begin
  1613. hp:=tdef(tobjectdef(ttypesym(p).typedef).symtable.DefList[i]);
  1614. if hp.typ=procdef then
  1615. begin
  1616. if assigned(tprocdef(hp).genericdef) and
  1617. (tprocdef(hp).genericdef.typ=procdef) and
  1618. assigned(tprocdef(tprocdef(hp).genericdef).generictokenbuf) then
  1619. begin
  1620. oldcurrent_filepos:=current_filepos;
  1621. current_filepos:=tprocdef(tprocdef(hp).genericdef).fileinfo;
  1622. current_tokenpos:=current_filepos;
  1623. current_scanner.startreplaytokens(tprocdef(tprocdef(hp).genericdef).generictokenbuf);
  1624. read_proc_body(nil,tprocdef(hp));
  1625. current_filepos:=oldcurrent_filepos;
  1626. end
  1627. else
  1628. MessagePos1(tprocdef(tprocdef(hp).genericdef).fileinfo,sym_e_forward_not_resolved,tprocdef(tprocdef(hp).genericdef).fullprocname(false));
  1629. end;
  1630. end;
  1631. { Restore symtablestack }
  1632. symtablestack.free;
  1633. symtablestack:=oldsymtablestack;
  1634. end;
  1635. procedure generate_specialization_procs;
  1636. begin
  1637. if assigned(current_module.globalsymtable) then
  1638. current_module.globalsymtable.SymList.ForEachCall(@specialize_objectdefs,nil);
  1639. if assigned(current_module.localsymtable) then
  1640. current_module.localsymtable.SymList.ForEachCall(@specialize_objectdefs,nil);
  1641. end;
  1642. end.