freepascal.compiler/packages/base/winunits/jwantstatus.pas

{******************************************************************************}
{                                                                              }
{ NT Status Codes API interface Unit for Object Pascal                         }
{                                                                              }
{ Portions created by Microsoft are Copyright (C) 1995-2001 Microsoft          }
{ Corporation. All Rights Reserved.                                            }
{                                                                              }
{ The original file is: ntstatus.h, released June 2000. The original Pascal    }
{ code is: Nt_Status.pas, released December 2000. The initial developer of the }
{ Pascal code is Marcel van Brakel (brakelm att chello dott nl).               }
{                                                                              }
{ Portions created by Marcel van Brakel are Copyright (C) 1999-2001            }
{ Marcel van Brakel. All Rights Reserved.                                      }
{                                                                              }
{ Obtained through: Joint Endeavour of Delphi Innovators (Project JEDI)        }
{                                                                              }
{ You may retrieve the latest version of this file at the Project JEDI         }
{ APILIB home page, located at http://jedi-apilib.sourceforge.net              }
{                                                                              }
{ The contents of this file are used with permission, subject to the Mozilla   }
{ Public License Version 1.1 (the "License"); you may not use this file except }
{ in compliance with the License. You may obtain a copy of the License at      }
{ http://www.mozilla.org/MPL/MPL-1.1.html                                      }
{                                                                              }
{ Software distributed under the License is distributed on an "AS IS" basis,   }
{ WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License for }
{ the specific language governing rights and limitations under the License.    }
{                                                                              }
{ Alternatively, the contents of this file may be used under the terms of the  }
{ GNU Lesser General Public License (the  "LGPL License"), in which case the   }
{ provisions of the LGPL License are applicable instead of those above.        }
{ If you wish to allow use of your version of this file only under the terms   }
{ of the LGPL License and not to allow others to use your version of this file }
{ under the MPL, indicate your decision by deleting  the provisions above and  }
{ replace  them with the notice and other provisions required by the LGPL      }
{ License.  If you do not delete the provisions above, a recipient may use     }
{ your version of this file under either the MPL or the LGPL License.          }
{                                                                              }
{ For more information about the LGPL: http://www.gnu.org/copyleft/lesser.html }
{                                                                              }
{******************************************************************************}

// $Id: JwaNtStatus.pas,v 1.6 2005/08/31 05:57:47 marquardt Exp $

{$IFNDEF JWA_INCLUDEMODE}

unit JwaNtStatus;

{$WEAKPACKAGEUNIT}

{$I jediapilib.inc}

interface

uses
  JwaWinType;

{$ENDIF !JWA_INCLUDEMODE}

{$IFDEF JWA_INTERFACESECTION}

{$HPPEMIT ''}
{$HPPEMIT '#include "ntstatus.h"'}
{$HPPEMIT ''}

/////////////////////////////////////////////////////////////////////////
//
// Standard Success values
//
//
/////////////////////////////////////////////////////////////////////////

//
// The success status codes 0 - 63 are reserved for wait completion status.
// FacilityCodes 0x5 - 0xF have been allocated by various drivers.
//

const
  STATUS_SUCCESS = NTSTATUS($00000000); // ntsubauth
  {$EXTERNALSYM STATUS_SUCCESS}

//
//  Values are 32 bit values layed out as follows:
//
//   3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
//   1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
//  +---+-+-+-----------------------+-------------------------------+
//  |Sev|C|R|     Facility          |               Code            |
//  +---+-+-+-----------------------+-------------------------------+
//
//  where
//
//      Sev - is the severity code
//
//          00 - Success
//          01 - Informational
//          10 - Warning
//          11 - Error
//
//      C - is the Customer code flag
//
//      R - is a reserved bit
//
//      Facility - is the facility code
//
//      Code - is the facility's status code
//
//
// Define the facility codes
//

  FACILITY_USB_ERROR_CODE      = $10;
  {$EXTERNALSYM FACILITY_USB_ERROR_CODE}
  FACILITY_TERMINAL_SERVER     = $A;
  {$EXTERNALSYM FACILITY_TERMINAL_SERVER}
  FACILITY_RPC_STUBS           = $3;
  {$EXTERNALSYM FACILITY_RPC_STUBS}
  FACILITY_RPC_RUNTIME         = $2;
  {$EXTERNALSYM FACILITY_RPC_RUNTIME}
  FACILITY_IO_ERROR_CODE       = $4;
  {$EXTERNALSYM FACILITY_IO_ERROR_CODE}
  FACILITY_HID_ERROR_CODE      = $11;
  {$EXTERNALSYM FACILITY_HID_ERROR_CODE}
  FACILITY_FIREWIRE_ERROR_CODE = $12;
  {$EXTERNALSYM FACILITY_FIREWIRE_ERROR_CODE}
  FACILITY_DEBUGGER            = $1;
  {$EXTERNALSYM FACILITY_DEBUGGER}
  FACILITY_CLUSTER_ERROR_CODE  = $13;
  {$EXTERNALSYM FACILITY_CLUSTER_ERROR_CODE}
  FACILITY_ACPI_ERROR_CODE     = $14;
  {$EXTERNALSYM FACILITY_ACPI_ERROR_CODE}

//
// Define the severity codes
//

  STATUS_SEVERITY_WARNING       = $2;
  {$EXTERNALSYM STATUS_SEVERITY_WARNING}
  STATUS_SEVERITY_SUCCESS       = $0;
  {$EXTERNALSYM STATUS_SEVERITY_SUCCESS}
  STATUS_SEVERITY_INFORMATIONAL = $1;
  {$EXTERNALSYM STATUS_SEVERITY_INFORMATIONAL}
  STATUS_SEVERITY_ERROR         = $3;
  {$EXTERNALSYM STATUS_SEVERITY_ERROR}

//
// MessageId: STATUS_WAIT_0
//
// MessageText:
//
//  STATUS_WAIT_0
//

  STATUS_WAIT_0 = NTSTATUS($00000000); // winnt
  {$EXTERNALSYM STATUS_WAIT_0}

//
// MessageId: STATUS_WAIT_1
//
// MessageText:
//
//  STATUS_WAIT_1
//

  STATUS_WAIT_1 = NTSTATUS($00000001);
  {$EXTERNALSYM STATUS_WAIT_1}

//
// MessageId: STATUS_WAIT_2
//
// MessageText:
//
//  STATUS_WAIT_2
//

  STATUS_WAIT_2 = NTSTATUS($00000002);
  {$EXTERNALSYM STATUS_WAIT_2}

//
// MessageId: STATUS_WAIT_3
//
// MessageText:
//
//  STATUS_WAIT_3
//

  STATUS_WAIT_3 = NTSTATUS($00000003);
  {$EXTERNALSYM STATUS_WAIT_3}

//
// MessageId: STATUS_WAIT_63
//
// MessageText:
//
//  STATUS_WAIT_63
//

  STATUS_WAIT_63 = NTSTATUS($0000003F);
  {$EXTERNALSYM STATUS_WAIT_63}

//
// The success status codes 128 - 191 are reserved for wait completion
// status with an abandoned mutant object.
//

  STATUS_ABANDONED = NTSTATUS($00000080);
  {$EXTERNALSYM STATUS_ABANDONED}

//
// MessageId: STATUS_ABANDONED_WAIT_0
//
// MessageText:
//
//  STATUS_ABANDONED_WAIT_0
//

  STATUS_ABANDONED_WAIT_0 = NTSTATUS($00000080); // winnt
  {$EXTERNALSYM STATUS_ABANDONED_WAIT_0}

//
// MessageId: STATUS_ABANDONED_WAIT_63
//
// MessageText:
//
//  STATUS_ABANDONED_WAIT_63
//

  STATUS_ABANDONED_WAIT_63 = NTSTATUS($000000BF);
  {$EXTERNALSYM STATUS_ABANDONED_WAIT_63}

//                                                             
// The success status codes 256, 257, 258, and 258 are reserved for
// User APC, Kernel APC, Alerted, and Timeout.                 
//                                                             
//
// MessageId: STATUS_USER_APC
//
// MessageText:
//
//  STATUS_USER_APC
//

  STATUS_USER_APC = NTSTATUS($000000C0); // winnt
  {$EXTERNALSYM STATUS_USER_APC}

//
// MessageId: STATUS_KERNEL_APC
//
// MessageText:
//
//  STATUS_KERNEL_APC
//

  STATUS_KERNEL_APC = NTSTATUS($00000100);
  {$EXTERNALSYM STATUS_KERNEL_APC}

//
// MessageId: STATUS_ALERTED
//
// MessageText:
//
//  STATUS_ALERTED
//

  STATUS_ALERTED = NTSTATUS($00000101);
  {$EXTERNALSYM STATUS_ALERTED}

//
// MessageId: STATUS_TIMEOUT
//
// MessageText:
//
//  STATUS_TIMEOUT
//

  STATUS_TIMEOUT = NTSTATUS($00000102); // winnt
  {$EXTERNALSYM STATUS_TIMEOUT}

//
// MessageId: STATUS_PENDING
//
// MessageText:
//
//  The operation that was requested is pending completion.
//

  STATUS_PENDING = NTSTATUS($00000103); // winnt
  {$EXTERNALSYM STATUS_PENDING}

//
// MessageId: STATUS_REPARSE
//
// MessageText:
//
//  A reparse should be performed by the Object Manager since the name of the file resulted in a symbolic link.
//

  STATUS_REPARSE = NTSTATUS($00000104);
  {$EXTERNALSYM STATUS_REPARSE}

//
// MessageId: STATUS_MORE_ENTRIES
//
// MessageText:
//
//  Returned by enumeration APIs to indicate more information is available to successive calls.
//

  STATUS_MORE_ENTRIES = NTSTATUS($00000105);
  {$EXTERNALSYM STATUS_MORE_ENTRIES}

//
// MessageId: STATUS_NOT_ALL_ASSIGNED
//
// MessageText:
//
//  Indicates not all privileges referenced are assigned to the caller.
//  This allows, for example, all privileges to be disabled without having to know exactly which privileges are assigned.
//

  STATUS_NOT_ALL_ASSIGNED = NTSTATUS($00000106);
  {$EXTERNALSYM STATUS_NOT_ALL_ASSIGNED}

//
// MessageId: STATUS_SOME_NOT_MAPPED
//
// MessageText:
//
//  Some of the information to be translated has not been translated.
//

  STATUS_SOME_NOT_MAPPED = NTSTATUS($00000107);
  {$EXTERNALSYM STATUS_SOME_NOT_MAPPED}

//
// MessageId: STATUS_OPLOCK_BREAK_IN_PROGRESS
//
// MessageText:
//
//  An open/create operation completed while an oplock break is underway.
//

  STATUS_OPLOCK_BREAK_IN_PROGRESS = NTSTATUS($00000108);
  {$EXTERNALSYM STATUS_OPLOCK_BREAK_IN_PROGRESS}

//
// MessageId: STATUS_VOLUME_MOUNTED
//
// MessageText:
//
//  A new volume has been mounted by a file system.
//

  STATUS_VOLUME_MOUNTED = NTSTATUS($00000109);
  {$EXTERNALSYM STATUS_VOLUME_MOUNTED}

//
// MessageId: STATUS_RXACT_COMMITTED
//
// MessageText:
//
//  This success level status indicates that the transaction state already exists for the registry sub-tree,
//  but that a transaction commit was previously aborted.
//  The commit has now been completed.
//

  STATUS_RXACT_COMMITTED = NTSTATUS($0000010A);
  {$EXTERNALSYM STATUS_RXACT_COMMITTED}

//
// MessageId: STATUS_NOTIFY_CLEANUP
//
// MessageText:
//
//  This indicates that a notify change request has been completed due to closing the handle
//  which made the notify change request.
//

  STATUS_NOTIFY_CLEANUP = NTSTATUS($0000010B);
  {$EXTERNALSYM STATUS_NOTIFY_CLEANUP}

//
// MessageId: STATUS_NOTIFY_ENUM_DIR
//
// MessageText:
//
//  This indicates that a notify change request is being completed and that the information
//  is not being returned in the caller's buffer.
//  The caller now needs to enumerate the files to find the changes.
//

  STATUS_NOTIFY_ENUM_DIR = NTSTATUS($0000010C);
  {$EXTERNALSYM STATUS_NOTIFY_ENUM_DIR}

//
// MessageId: STATUS_NO_QUOTAS_FOR_ACCOUNT
//
// MessageText:
//
//  {No Quotas}
//  No system quota limits are specifically set for this account.
//

  STATUS_NO_QUOTAS_FOR_ACCOUNT = NTSTATUS($0000010D);
  {$EXTERNALSYM STATUS_NO_QUOTAS_FOR_ACCOUNT}

//
// MessageId: STATUS_PRIMARY_TRANSPORT_CONNECT_FAILED
//
// MessageText:
//
//  {Connect Failure on Primary Transport}
//  An attempt was made to connect to the remote server %hs on the primary transport, but the connection failed.
//  The computer WAS able to connect on a secondary transport.
//

  STATUS_PRIMARY_TRANSPORT_CONNECT_FAILED = NTSTATUS($0000010E);
  {$EXTERNALSYM STATUS_PRIMARY_TRANSPORT_CONNECT_FAILED}

//
// MessageId: STATUS_PAGE_FAULT_TRANSITION
//
// MessageText:
//
//  Page fault was a transition fault.
//

  STATUS_PAGE_FAULT_TRANSITION = NTSTATUS($00000110);
  {$EXTERNALSYM STATUS_PAGE_FAULT_TRANSITION}

//
// MessageId: STATUS_PAGE_FAULT_DEMAND_ZERO
//
// MessageText:
//
//  Page fault was a demand zero fault.
//

  STATUS_PAGE_FAULT_DEMAND_ZERO = NTSTATUS($00000111);
  {$EXTERNALSYM STATUS_PAGE_FAULT_DEMAND_ZERO}

//
// MessageId: STATUS_PAGE_FAULT_COPY_ON_WRITE
//
// MessageText:
//
//  Page fault was a demand zero fault.
//

  STATUS_PAGE_FAULT_COPY_ON_WRITE = NTSTATUS($00000112);
  {$EXTERNALSYM STATUS_PAGE_FAULT_COPY_ON_WRITE}

//
// MessageId: STATUS_PAGE_FAULT_GUARD_PAGE
//
// MessageText:
//
//  Page fault was a demand zero fault.
//

  STATUS_PAGE_FAULT_GUARD_PAGE = NTSTATUS($00000113);
  {$EXTERNALSYM STATUS_PAGE_FAULT_GUARD_PAGE}

//
// MessageId: STATUS_PAGE_FAULT_PAGING_FILE
//
// MessageText:
//
//  Page fault was satisfied by reading from a secondary storage device.
//

  STATUS_PAGE_FAULT_PAGING_FILE = NTSTATUS($00000114);
  {$EXTERNALSYM STATUS_PAGE_FAULT_PAGING_FILE}

//
// MessageId: STATUS_CACHE_PAGE_LOCKED
//
// MessageText:
//
//  Cached page was locked during operation.
//

  STATUS_CACHE_PAGE_LOCKED = NTSTATUS($00000115);
  {$EXTERNALSYM STATUS_CACHE_PAGE_LOCKED}

//
// MessageId: STATUS_CRASH_DUMP
//
// MessageText:
//
//  Crash dump exists in paging file.
//

  STATUS_CRASH_DUMP = NTSTATUS($00000116);
  {$EXTERNALSYM STATUS_CRASH_DUMP}

//
// MessageId: STATUS_BUFFER_ALL_ZEROS
//
// MessageText:
//
//  Specified buffer contains all zeros.
//

  STATUS_BUFFER_ALL_ZEROS = NTSTATUS($00000117);
  {$EXTERNALSYM STATUS_BUFFER_ALL_ZEROS}

//
// MessageId: STATUS_REPARSE_OBJECT
//
// MessageText:
//
//  A reparse should be performed by the Object Manager since the name of the file resulted in a symbolic link.
//

  STATUS_REPARSE_OBJECT = NTSTATUS($00000118);
  {$EXTERNALSYM STATUS_REPARSE_OBJECT}

//
// MessageId: STATUS_RESOURCE_REQUIREMENTS_CHANGED
//
// MessageText:
//
//  The device has succeeded a query-stop and its resource requirements have changed.
//

  STATUS_RESOURCE_REQUIREMENTS_CHANGED = NTSTATUS($00000119);
  {$EXTERNALSYM STATUS_RESOURCE_REQUIREMENTS_CHANGED}

//
// MessageId: STATUS_TRANSLATION_COMPLETE
//
// MessageText:
//
//  The translator has translated these resources into the global space and no further translations should be performed.
//

  STATUS_TRANSLATION_COMPLETE = NTSTATUS($00000120);
  {$EXTERNALSYM STATUS_TRANSLATION_COMPLETE}

//
// MessageId: STATUS_DS_MEMBERSHIP_EVALUATED_LOCALLY
//
// MessageText:
//
//  The directory service evaluated group memberships locally, as it was unable to contact a global catalog server.
//

  STATUS_DS_MEMBERSHIP_EVALUATED_LOCALLY = NTSTATUS($00000121);
  {$EXTERNALSYM STATUS_DS_MEMBERSHIP_EVALUATED_LOCALLY}

//
// MessageId: DBG_EXCEPTION_HANDLED
//
// MessageText:
//
//  Debugger handled exception
//

  DBG_EXCEPTION_HANDLED = NTSTATUS($00010001); // windbgkd
  {$EXTERNALSYM DBG_EXCEPTION_HANDLED}

//
// MessageId: DBG_CONTINUE
//
// MessageText:
//
//  Debugger continued
//

  DBG_CONTINUE = NTSTATUS($00010002); // winnt
  {$EXTERNALSYM DBG_CONTINUE}


/////////////////////////////////////////////////////////////////////////
//
// Standard Information values
//
/////////////////////////////////////////////////////////////////////////

//
// MessageId: STATUS_OBJECT_NAME_EXISTS
//
// MessageText:
//
//  {Object Exists}
//  An attempt was made to create an object and the object name already existed.
//

  STATUS_OBJECT_NAME_EXISTS = NTSTATUS($40000000);
  {$EXTERNALSYM STATUS_OBJECT_NAME_EXISTS}

//
// MessageId: STATUS_THREAD_WAS_SUSPENDED
//
// MessageText:
//
//  {Thread Suspended}
//  A thread termination occurred while the thread was suspended. The thread was resumed, and termination proceeded.
//

  STATUS_THREAD_WAS_SUSPENDED = NTSTATUS($40000001);
  {$EXTERNALSYM STATUS_THREAD_WAS_SUSPENDED}

//
// MessageId: STATUS_WORKING_SET_LIMIT_RANGE
//
// MessageText:
//
//  {Working Set Range Error}
//  An attempt was made to set the working set minimum or maximum to values which are outside of the allowable range.
//

  STATUS_WORKING_SET_LIMIT_RANGE = NTSTATUS($40000002);
  {$EXTERNALSYM STATUS_WORKING_SET_LIMIT_RANGE}

//
// MessageId: STATUS_IMAGE_NOT_AT_BASE
//
// MessageText:
//
//  {Image Relocated}
//  An image file could not be mapped at the address specified in the image file. Local fixups must be performed on this image.
//

  STATUS_IMAGE_NOT_AT_BASE = NTSTATUS($40000003);
  {$EXTERNALSYM STATUS_IMAGE_NOT_AT_BASE}

//
// MessageId: STATUS_RXACT_STATE_CREATED
//
// MessageText:
//
//  This informational level status indicates that a specified registry sub-tree transaction state did not yet exist and had to be created.
//

  STATUS_RXACT_STATE_CREATED = NTSTATUS($40000004);
  {$EXTERNALSYM STATUS_RXACT_STATE_CREATED}

//
// MessageId: STATUS_SEGMENT_NOTIFICATION
//
// MessageText:
//
//  {Segment Load}
//  A virtual DOS machine (VDM) is loading, unloading, or moving an MS-DOS or Win16 program segment image.
//  An exception is raised so a debugger can load, unload or track symbols and breakpoints within these 16-bit segments.
//

  STATUS_SEGMENT_NOTIFICATION = NTSTATUS($40000005); // winnt
  {$EXTERNALSYM STATUS_SEGMENT_NOTIFICATION}

//
// MessageId: STATUS_LOCAL_USER_SESSION_KEY
//
// MessageText:
//
//  {Local Session Key}
//  A user session key was requested for a local RPC connection. The session key returned is a constant value and not unique to this connection.
//

  STATUS_LOCAL_USER_SESSION_KEY = NTSTATUS($40000006);
  {$EXTERNALSYM STATUS_LOCAL_USER_SESSION_KEY}

//
// MessageId: STATUS_BAD_CURRENT_DIRECTORY
//
// MessageText:
//
//  {Invalid Current Directory}
//  The process cannot switch to the startup current directory %hs.
//  Select OK to set current directory to %hs, or select CANCEL to exit.
//

  STATUS_BAD_CURRENT_DIRECTORY = NTSTATUS($40000007);
  {$EXTERNALSYM STATUS_BAD_CURRENT_DIRECTORY}

//
// MessageId: STATUS_SERIAL_MORE_WRITES
//
// MessageText:
//
//  {Serial IOCTL Complete}
//  A serial I/O operation was completed by another write to a serial port.
//  (The IOCTL_SERIAL_XOFF_COUNTER reached zero.)
//

  STATUS_SERIAL_MORE_WRITES = NTSTATUS($40000008);
  {$EXTERNALSYM STATUS_SERIAL_MORE_WRITES}

//
// MessageId: STATUS_REGISTRY_RECOVERED
//
// MessageText:
//
//  {Registry Recovery}
//  One of the files containing the system's Registry data had to be recovered by use of a log or alternate copy.
//  The recovery was successful.
//

  STATUS_REGISTRY_RECOVERED = NTSTATUS($40000009);
  {$EXTERNALSYM STATUS_REGISTRY_RECOVERED}

//
// MessageId: STATUS_FT_READ_RECOVERY_FROM_BACKUP
//
// MessageText:
//
//  {Redundant Read}
//  To satisfy a read request, the NT fault-tolerant file system successfully read the requested data from a redundant copy.
//  This was done because the file system encountered a failure on a member of the fault-tolerant volume,
//  but was unable to reassign the failing area of the device.
//

  STATUS_FT_READ_RECOVERY_FROM_BACKUP = NTSTATUS($4000000A);
  {$EXTERNALSYM STATUS_FT_READ_RECOVERY_FROM_BACKUP}

//
// MessageId: STATUS_FT_WRITE_RECOVERY
//
// MessageText:
//
//  {Redundant Write}
//  To satisfy a write request, the NT fault-tolerant file system successfully wrote a redundant copy of the information.
//  This was done because the file system encountered a failure on a member of the fault-tolerant volume,
//  but was not able to reassign the failing area of the device.
//

  STATUS_FT_WRITE_RECOVERY = NTSTATUS($4000000B);
  {$EXTERNALSYM STATUS_FT_WRITE_RECOVERY}

//
// MessageId: STATUS_SERIAL_COUNTER_TIMEOUT
//
// MessageText:
//
//  {Serial IOCTL Timeout}
//  A serial I/O operation completed because the time-out period expired.
//  (The IOCTL_SERIAL_XOFF_COUNTER had not reached zero.)
//

  STATUS_SERIAL_COUNTER_TIMEOUT = NTSTATUS($4000000C);
  {$EXTERNALSYM STATUS_SERIAL_COUNTER_TIMEOUT}

//
// MessageId: STATUS_NULL_LM_PASSWORD
//
// MessageText:
//
//  {Password Too Complex}
//  The Windows password is too complex to be converted to a LAN Manager password.
//  The LAN Manager password returned is a NULL string.
//

  STATUS_NULL_LM_PASSWORD = NTSTATUS($4000000D);
  {$EXTERNALSYM STATUS_NULL_LM_PASSWORD}

//
// MessageId: STATUS_IMAGE_MACHINE_TYPE_MISMATCH
//
// MessageText:
//
//  {Machine Type Mismatch}
//  The image file %hs is valid, but is for a machine type other than the current machine. Select OK to continue, or CANCEL to fail the DLL load.
//

  STATUS_IMAGE_MACHINE_TYPE_MISMATCH = NTSTATUS($4000000E);
  {$EXTERNALSYM STATUS_IMAGE_MACHINE_TYPE_MISMATCH}

//
// MessageId: STATUS_RECEIVE_PARTIAL
//
// MessageText:
//
//  {Partial Data Received}
//  The network transport returned partial data to its client. The remaining data will be sent later.
//

  STATUS_RECEIVE_PARTIAL = NTSTATUS($4000000F);
  {$EXTERNALSYM STATUS_RECEIVE_PARTIAL}

//
// MessageId: STATUS_RECEIVE_EXPEDITED
//
// MessageText:
//
//  {Expedited Data Received}
//  The network transport returned data to its client that was marked as expedited by the remote system.
//

  STATUS_RECEIVE_EXPEDITED = NTSTATUS($40000010);
  {$EXTERNALSYM STATUS_RECEIVE_EXPEDITED}

//
// MessageId: STATUS_RECEIVE_PARTIAL_EXPEDITED
//
// MessageText:
//
//  {Partial Expedited Data Received}
//  The network transport returned partial data to its client and this data was marked as expedited by the remote system. The remaining data will be sent later.
//

  STATUS_RECEIVE_PARTIAL_EXPEDITED = NTSTATUS($40000011);
  {$EXTERNALSYM STATUS_RECEIVE_PARTIAL_EXPEDITED}

//
// MessageId: STATUS_EVENT_DONE
//
// MessageText:
//
//  {TDI Event Done}
//  The TDI indication has completed successfully.
//

  STATUS_EVENT_DONE = NTSTATUS($40000012);
  {$EXTERNALSYM STATUS_EVENT_DONE}

//
// MessageId: STATUS_EVENT_PENDING
//
// MessageText:
//
//  {TDI Event Pending}
//  The TDI indication has entered the pending state.
//

  STATUS_EVENT_PENDING = NTSTATUS($40000013);
  {$EXTERNALSYM STATUS_EVENT_PENDING}

//
// MessageId: STATUS_CHECKING_FILE_SYSTEM
//
// MessageText:
//
//  Checking file system on %wZ
//

  STATUS_CHECKING_FILE_SYSTEM = NTSTATUS($40000014);
  {$EXTERNALSYM STATUS_CHECKING_FILE_SYSTEM}

//
// MessageId: STATUS_FATAL_APP_EXIT
//
// MessageText:
//
//  {Fatal Application Exit}
//  %hs
//

  STATUS_FATAL_APP_EXIT = NTSTATUS($40000015);
  {$EXTERNALSYM STATUS_FATAL_APP_EXIT}

//
// MessageId: STATUS_PREDEFINED_HANDLE
//
// MessageText:
//
//  The specified registry key is referenced by a predefined handle.
//

  STATUS_PREDEFINED_HANDLE = NTSTATUS($40000016);
  {$EXTERNALSYM STATUS_PREDEFINED_HANDLE}

//
// MessageId: STATUS_WAS_UNLOCKED
//
// MessageText:
//
//  {Page Unlocked}
//  The page protection of a locked page was changed to 'No Access' and the page was unlocked from memory and from the process.
//

  STATUS_WAS_UNLOCKED = NTSTATUS($40000017);
  {$EXTERNALSYM STATUS_WAS_UNLOCKED}

//
// MessageId: STATUS_SERVICE_NOTIFICATION
//
// MessageText:
//
//  %hs
//

  STATUS_SERVICE_NOTIFICATION = NTSTATUS($40000018);
  {$EXTERNALSYM STATUS_SERVICE_NOTIFICATION}

//
// MessageId: STATUS_WAS_LOCKED
//
// MessageText:
//
//  {Page Locked}
//  One of the pages to lock was already locked.
//

  STATUS_WAS_LOCKED = NTSTATUS($40000019);
  {$EXTERNALSYM STATUS_WAS_LOCKED}

//
// MessageId: STATUS_LOG_HARD_ERROR
//
// MessageText:
//
//  Application popup: %1 : %2
//

  STATUS_LOG_HARD_ERROR = NTSTATUS($4000001A);
  {$EXTERNALSYM STATUS_LOG_HARD_ERROR}

//
// MessageId: STATUS_ALREADY_WIN32
//
// MessageText:
//
//  STATUS_ALREADY_WIN32
//

  STATUS_ALREADY_WIN32 = NTSTATUS($4000001B);
  {$EXTERNALSYM STATUS_ALREADY_WIN32}

//
// MessageId: STATUS_WX86_UNSIMULATE
//
// MessageText:
//
//  Exception status code used by Win32 x86 emulation subsystem.
//

  STATUS_WX86_UNSIMULATE = NTSTATUS($4000001C);
  {$EXTERNALSYM STATUS_WX86_UNSIMULATE}

//
// MessageId: STATUS_WX86_CONTINUE
//
// MessageText:
//
//  Exception status code used by Win32 x86 emulation subsystem.
//

  STATUS_WX86_CONTINUE = NTSTATUS($4000001D);
  {$EXTERNALSYM STATUS_WX86_CONTINUE}

//
// MessageId: STATUS_WX86_SINGLE_STEP
//
// MessageText:
//
//  Exception status code used by Win32 x86 emulation subsystem.
//

  STATUS_WX86_SINGLE_STEP = NTSTATUS($4000001E);
  {$EXTERNALSYM STATUS_WX86_SINGLE_STEP}

//
// MessageId: STATUS_WX86_BREAKPOINT
//
// MessageText:
//
//  Exception status code used by Win32 x86 emulation subsystem.
//

  STATUS_WX86_BREAKPOINT = NTSTATUS($4000001F);
  {$EXTERNALSYM STATUS_WX86_BREAKPOINT}

//
// MessageId: STATUS_WX86_EXCEPTION_CONTINUE
//
// MessageText:
//
//  Exception status code used by Win32 x86 emulation subsystem.
//

  STATUS_WX86_EXCEPTION_CONTINUE = NTSTATUS($40000020);
  {$EXTERNALSYM STATUS_WX86_EXCEPTION_CONTINUE}

//
// MessageId: STATUS_WX86_EXCEPTION_LASTCHANCE
//
// MessageText:
//
//  Exception status code used by Win32 x86 emulation subsystem.
//

  STATUS_WX86_EXCEPTION_LASTCHANCE = NTSTATUS($40000021);
  {$EXTERNALSYM STATUS_WX86_EXCEPTION_LASTCHANCE}

//
// MessageId: STATUS_WX86_EXCEPTION_CHAIN
//
// MessageText:
//
//  Exception status code used by Win32 x86 emulation subsystem.
//

  STATUS_WX86_EXCEPTION_CHAIN = NTSTATUS($40000022);
  {$EXTERNALSYM STATUS_WX86_EXCEPTION_CHAIN}

//
// MessageId: STATUS_IMAGE_MACHINE_TYPE_MISMATCH_EXE
//
// MessageText:
//
//  {Machine Type Mismatch}
//  The image file %hs is valid, but is for a machine type other than the current machine.
//

  STATUS_IMAGE_MACHINE_TYPE_MISMATCH_EXE = NTSTATUS($40000023);
  {$EXTERNALSYM STATUS_IMAGE_MACHINE_TYPE_MISMATCH_EXE}

//
// MessageId: STATUS_NO_YIELD_PERFORMED
//
// MessageText:
//
//  A yield execution was performed and no thread was available to run.
//

  STATUS_NO_YIELD_PERFORMED = NTSTATUS($40000024);
  {$EXTERNALSYM STATUS_NO_YIELD_PERFORMED}

//
// MessageId: STATUS_TIMER_RESUME_IGNORED
//
// MessageText:
//
//  The resumable flag to a timer API was ignored.
//

  STATUS_TIMER_RESUME_IGNORED = NTSTATUS($40000025);
  {$EXTERNALSYM STATUS_TIMER_RESUME_IGNORED}

//
// MessageId: STATUS_ARBITRATION_UNHANDLED
//
// MessageText:
//
//  The arbiter has deferred arbitration of these resources to its parent
//

  STATUS_ARBITRATION_UNHANDLED = NTSTATUS($40000026);
  {$EXTERNALSYM STATUS_ARBITRATION_UNHANDLED}

//
// MessageId: STATUS_CARDBUS_NOT_SUPPORTED
//
// MessageText:
//
//  The device "%hs" has detected a CardBus card in its slot, but the firmware on this system is not configured to allow the CardBus controller to be run in CardBus mode.
//  The operating system will currently accept only 16-bit (R2) pc-cards on this controller.
//

  STATUS_CARDBUS_NOT_SUPPORTED = NTSTATUS($40000027);
  {$EXTERNALSYM STATUS_CARDBUS_NOT_SUPPORTED}

//
// MessageId: STATUS_WX86_CREATEWX86TIB
//
// MessageText:
//
//  Exception status code used by Win32 x86 emulation subsystem.
//

  STATUS_WX86_CREATEWX86TIB = NTSTATUS($40000028);
  {$EXTERNALSYM STATUS_WX86_CREATEWX86TIB}

//
// MessageId: STATUS_MP_PROCESSOR_MISMATCH
//
// MessageText:
//
//  The CPUs in this multiprocessor system are not all the same revision level.  To use all processors the operating system restricts itself to the features of the least capable processor in the system.  Should problems occur with this system, contact the CPU manufacturer to see if this mix of processors is supported. 
//

  STATUS_MP_PROCESSOR_MISMATCH = NTSTATUS($40000029);
  {$EXTERNALSYM STATUS_MP_PROCESSOR_MISMATCH}

//
// MessageId: DBG_REPLY_LATER
//
// MessageText:
//
//  Debugger will reply later.
//

  DBG_REPLY_LATER = NTSTATUS($40010001);
  {$EXTERNALSYM DBG_REPLY_LATER}

//
// MessageId: DBG_UNABLE_TO_PROVIDE_HANDLE
//
// MessageText:
//
//  Debugger can not provide handle.
//

  DBG_UNABLE_TO_PROVIDE_HANDLE = NTSTATUS($40010002);
  {$EXTERNALSYM DBG_UNABLE_TO_PROVIDE_HANDLE}

//
// MessageId: DBG_TERMINATE_THREAD
//
// MessageText:
//
//  Debugger terminated thread.
//

  DBG_TERMINATE_THREAD = NTSTATUS($40010003); // winnt
  {$EXTERNALSYM DBG_TERMINATE_THREAD}

//
// MessageId: DBG_TERMINATE_PROCESS
//
// MessageText:
//
//  Debugger terminated process.
//

  DBG_TERMINATE_PROCESS = NTSTATUS($40010004); // winnt
  {$EXTERNALSYM DBG_TERMINATE_PROCESS}

//
// MessageId: DBG_CONTROL_C
//
// MessageText:
//
//  Debugger got control C.
//

  DBG_CONTROL_C = NTSTATUS($40010005); // winnt
  {$EXTERNALSYM DBG_CONTROL_C}

//
// MessageId: DBG_PRINTEXCEPTION_C
//
// MessageText:
//
//  Debugger printerd exception on control C.
//

  DBG_PRINTEXCEPTION_C = NTSTATUS($40010006);
  {$EXTERNALSYM DBG_PRINTEXCEPTION_C}

//
// MessageId: DBG_RIPEXCEPTION
//
// MessageText:
//
//  Debugger recevice RIP exception.
//

  DBG_RIPEXCEPTION = NTSTATUS($40010007);
  {$EXTERNALSYM DBG_RIPEXCEPTION}

//
// MessageId: DBG_CONTROL_BREAK
//
// MessageText:
//
//  Debugger received control break.
//

  DBG_CONTROL_BREAK = NTSTATUS($40010008); // winnt
  {$EXTERNALSYM DBG_CONTROL_BREAK}


/////////////////////////////////////////////////////////////////////////
//
// Standard Warning values
//
//
// Note:  Do NOT use the value 0x80000000L, as this is a non-portable value
//        for the NT_SUCCESS macro. Warning values start with a code of 1.
//
/////////////////////////////////////////////////////////////////////////

//
// MessageId: STATUS_GUARD_PAGE_VIOLATION
//
// MessageText:
//
//  {EXCEPTION}
//  Guard Page Exception
//  A page of memory that marks the end of a data structure, such as a stack or an array, has been accessed.
//

  STATUS_GUARD_PAGE_VIOLATION = NTSTATUS($80000001); // winnt
  {$EXTERNALSYM STATUS_GUARD_PAGE_VIOLATION}

//
// MessageId: STATUS_DATATYPE_MISALIGNMENT
//
// MessageText:
//
//  {EXCEPTION}
//  Alignment Fault
//  A datatype misalignment was detected in a load or store instruction.
//

  STATUS_DATATYPE_MISALIGNMENT = NTSTATUS($80000002); // winnt
  {$EXTERNALSYM STATUS_DATATYPE_MISALIGNMENT}

//
// MessageId: STATUS_BREAKPOINT
//
// MessageText:
//
//  {EXCEPTION}
//  Breakpoint
//  A breakpoint has been reached.
//

  STATUS_BREAKPOINT = NTSTATUS($80000003); // winnt
  {$EXTERNALSYM STATUS_BREAKPOINT}

//
// MessageId: STATUS_SINGLE_STEP
//
// MessageText:
//
//  {EXCEPTION}
//  Single Step
//  A single step or trace operation has just been completed.
//

  STATUS_SINGLE_STEP = NTSTATUS($80000004); // winnt
  {$EXTERNALSYM STATUS_SINGLE_STEP}

//
// MessageId: STATUS_BUFFER_OVERFLOW
//
// MessageText:
//
//  {Buffer Overflow}
//  The data was too large to fit into the specified buffer.
//

  STATUS_BUFFER_OVERFLOW = NTSTATUS($80000005);
  {$EXTERNALSYM STATUS_BUFFER_OVERFLOW}

//
// MessageId: STATUS_NO_MORE_FILES
//
// MessageText:
//
//  {No More Files}
//  No more files were found which match the file specification.
//

  STATUS_NO_MORE_FILES = NTSTATUS($80000006);
  {$EXTERNALSYM STATUS_NO_MORE_FILES}

//
// MessageId: STATUS_WAKE_SYSTEM_DEBUGGER
//
// MessageText:
//
//  {Kernel Debugger Awakened}
//  the system debugger was awakened by an interrupt.
//

  STATUS_WAKE_SYSTEM_DEBUGGER = NTSTATUS($80000007);
  {$EXTERNALSYM STATUS_WAKE_SYSTEM_DEBUGGER}

//
// MessageId: STATUS_HANDLES_CLOSED
//
// MessageText:
//
//  {Handles Closed}
//  Handles to objects have been automatically closed as a result of the requested operation.
//

  STATUS_HANDLES_CLOSED = NTSTATUS($8000000A);
  {$EXTERNALSYM STATUS_HANDLES_CLOSED}

//
// MessageId: STATUS_NO_INHERITANCE
//
// MessageText:
//
//  {Non-Inheritable ACL}
//  An access control list (ACL) contains no components that can be inherited.
//

  STATUS_NO_INHERITANCE = NTSTATUS($8000000B);
  {$EXTERNALSYM STATUS_NO_INHERITANCE}

//
// MessageId: STATUS_GUID_SUBSTITUTION_MADE
//
// MessageText:
//
//  {GUID Substitution}
//  During the translation of a global identifier (GUID) to a Windows security ID (SID), no administratively-defined GUID prefix was found.
//  A substitute prefix was used, which will not compromise system security.
//  However, this may provide a more restrictive access than intended.
//

  STATUS_GUID_SUBSTITUTION_MADE = NTSTATUS($8000000C);
  {$EXTERNALSYM STATUS_GUID_SUBSTITUTION_MADE}

//
// MessageId: STATUS_PARTIAL_COPY
//
// MessageText:
//
//  {Partial Copy}
//  Due to protection conflicts not all the requested bytes could be copied.
//

  STATUS_PARTIAL_COPY = NTSTATUS($8000000D);
  {$EXTERNALSYM STATUS_PARTIAL_COPY}

//
// MessageId: STATUS_DEVICE_PAPER_EMPTY
//
// MessageText:
//
//  {Out of Paper}
//  The printer is out of paper.
//

  STATUS_DEVICE_PAPER_EMPTY = NTSTATUS($8000000E);
  {$EXTERNALSYM STATUS_DEVICE_PAPER_EMPTY}

//
// MessageId: STATUS_DEVICE_POWERED_OFF
//
// MessageText:
//
//  {Device Power Is Off}
//  The printer power has been turned off.
//

  STATUS_DEVICE_POWERED_OFF = NTSTATUS($8000000F);
  {$EXTERNALSYM STATUS_DEVICE_POWERED_OFF}

//
// MessageId: STATUS_DEVICE_OFF_LINE
//
// MessageText:
//
//  {Device Offline}
//  The printer has been taken offline.
//

  STATUS_DEVICE_OFF_LINE = NTSTATUS($80000010);
  {$EXTERNALSYM STATUS_DEVICE_OFF_LINE}

//
// MessageId: STATUS_DEVICE_BUSY
//
// MessageText:
//
//  {Device Busy}
//  The device is currently busy.
//

  STATUS_DEVICE_BUSY = NTSTATUS($80000011);
  {$EXTERNALSYM STATUS_DEVICE_BUSY}

//
// MessageId: STATUS_NO_MORE_EAS
//
// MessageText:
//
//  {No More EAs}
//  No more extended attributes (EAs) were found for the file.
//

  STATUS_NO_MORE_EAS = NTSTATUS($80000012);
  {$EXTERNALSYM STATUS_NO_MORE_EAS}

//
// MessageId: STATUS_INVALID_EA_NAME
//
// MessageText:
//
//  {Illegal EA}
//  The specified extended attribute (EA) name contains at least one illegal character.
//

  STATUS_INVALID_EA_NAME = NTSTATUS($80000013);
  {$EXTERNALSYM STATUS_INVALID_EA_NAME}

//
// MessageId: STATUS_EA_LIST_INCONSISTENT
//
// MessageText:
//
//  {Inconsistent EA List}
//  The extended attribute (EA) list is inconsistent.
//

  STATUS_EA_LIST_INCONSISTENT = NTSTATUS($80000014);
  {$EXTERNALSYM STATUS_EA_LIST_INCONSISTENT}

//
// MessageId: STATUS_INVALID_EA_FLAG
//
// MessageText:
//
//  {Invalid EA Flag}
//  An invalid extended attribute (EA) flag was set.
//

  STATUS_INVALID_EA_FLAG = NTSTATUS($80000015);
  {$EXTERNALSYM STATUS_INVALID_EA_FLAG}

//
// MessageId: STATUS_VERIFY_REQUIRED
//
// MessageText:
//
//  {Verifying Disk}
//  The media has changed and a verify operation is in progress so no reads or writes may be performed to the device, except those used in the verify operation.
//

  STATUS_VERIFY_REQUIRED = NTSTATUS($80000016);
  {$EXTERNALSYM STATUS_VERIFY_REQUIRED}

//
// MessageId: STATUS_EXTRANEOUS_INFORMATION
//
// MessageText:
//
//  {Too Much Information}
//  The specified access control list (ACL) contained more information than was expected.
//

  STATUS_EXTRANEOUS_INFORMATION = NTSTATUS($80000017);
  {$EXTERNALSYM STATUS_EXTRANEOUS_INFORMATION}

//
// MessageId: STATUS_RXACT_COMMIT_NECESSARY
//
// MessageText:
//
//  This warning level status indicates that the transaction state already exists for the registry sub-tree, but that a transaction commit was previously aborted.
//  The commit has NOT been completed, but has not been rolled back either (so it may still be committed if desired).
//

  STATUS_RXACT_COMMIT_NECESSARY = NTSTATUS($80000018);
  {$EXTERNALSYM STATUS_RXACT_COMMIT_NECESSARY}

//
// MessageId: STATUS_NO_MORE_ENTRIES
//
// MessageText:
//
//  {No More Entries}
//  No more entries are available from an enumeration operation.
//

  STATUS_NO_MORE_ENTRIES = NTSTATUS($8000001A);
  {$EXTERNALSYM STATUS_NO_MORE_ENTRIES}

//
// MessageId: STATUS_FILEMARK_DETECTED
//
// MessageText:
//
//  {Filemark Found}
//  A filemark was detected.
//

  STATUS_FILEMARK_DETECTED = NTSTATUS($8000001B);
  {$EXTERNALSYM STATUS_FILEMARK_DETECTED}

//
// MessageId: STATUS_MEDIA_CHANGED
//
// MessageText:
//
//  {Media Changed}
//  The media may have changed.
//

  STATUS_MEDIA_CHANGED = NTSTATUS($8000001C);
  {$EXTERNALSYM STATUS_MEDIA_CHANGED}

//
// MessageId: STATUS_BUS_RESET
//
// MessageText:
//
//  {I/O Bus Reset}
//  An I/O bus reset was detected.
//

  STATUS_BUS_RESET = NTSTATUS($8000001D);
  {$EXTERNALSYM STATUS_BUS_RESET}

//
// MessageId: STATUS_END_OF_MEDIA
//
// MessageText:
//
//  {End of Media}
//  The end of the media was encountered.
//

  STATUS_END_OF_MEDIA = NTSTATUS($8000001E);
  {$EXTERNALSYM STATUS_END_OF_MEDIA}

//
// MessageId: STATUS_BEGINNING_OF_MEDIA
//
// MessageText:
//
//  Beginning of tape or partition has been detected.
//

  STATUS_BEGINNING_OF_MEDIA = NTSTATUS($8000001F);
  {$EXTERNALSYM STATUS_BEGINNING_OF_MEDIA}

//
// MessageId: STATUS_MEDIA_CHECK
//
// MessageText:
//
//  {Media Changed}
//  The media may have changed.
//

  STATUS_MEDIA_CHECK = NTSTATUS($80000020);
  {$EXTERNALSYM STATUS_MEDIA_CHECK}

//
// MessageId: STATUS_SETMARK_DETECTED
//
// MessageText:
//
//  A tape access reached a setmark.
//

  STATUS_SETMARK_DETECTED = NTSTATUS($80000021);
  {$EXTERNALSYM STATUS_SETMARK_DETECTED}

//
// MessageId: STATUS_NO_DATA_DETECTED
//
// MessageText:
//
//  During a tape access, the end of the data written is reached.
//

  STATUS_NO_DATA_DETECTED = NTSTATUS($80000022);
  {$EXTERNALSYM STATUS_NO_DATA_DETECTED}

//
// MessageId: STATUS_REDIRECTOR_HAS_OPEN_HANDLES
//
// MessageText:
//
//  The redirector is in use and cannot be unloaded.
//

  STATUS_REDIRECTOR_HAS_OPEN_HANDLES = NTSTATUS($80000023);
  {$EXTERNALSYM STATUS_REDIRECTOR_HAS_OPEN_HANDLES}

//
// MessageId: STATUS_SERVER_HAS_OPEN_HANDLES
//
// MessageText:
//
//  The server is in use and cannot be unloaded.
//

  STATUS_SERVER_HAS_OPEN_HANDLES = NTSTATUS($80000024);
  {$EXTERNALSYM STATUS_SERVER_HAS_OPEN_HANDLES}

//
// MessageId: STATUS_ALREADY_DISCONNECTED
//
// MessageText:
//
//  The specified connection has already been disconnected.
//

  STATUS_ALREADY_DISCONNECTED = NTSTATUS($80000025);
  {$EXTERNALSYM STATUS_ALREADY_DISCONNECTED}

//
// MessageId: STATUS_LONGJUMP
//
// MessageText:
//
//  A long jump has been executed.
//

  STATUS_LONGJUMP = NTSTATUS($80000026);
  {$EXTERNALSYM STATUS_LONGJUMP}

//
// MessageId: DBG_EXCEPTION_NOT_HANDLED
//
// MessageText:
//
//  Debugger did not handle the exception.
//

  DBG_EXCEPTION_NOT_HANDLED = NTSTATUS($80010001); // winnt
  {$EXTERNALSYM DBG_EXCEPTION_NOT_HANDLED}


/////////////////////////////////////////////////////////////////////////
//
//  Standard Error values
//
/////////////////////////////////////////////////////////////////////////

//
// MessageId: STATUS_UNSUCCESSFUL
//
// MessageText:
//
//  {Operation Failed}
//  The requested operation was unsuccessful.
//

  STATUS_UNSUCCESSFUL = NTSTATUS($C0000001);
  {$EXTERNALSYM STATUS_UNSUCCESSFUL}

//
// MessageId: STATUS_NOT_IMPLEMENTED
//
// MessageText:
//
//  {Not Implemented}
//  The requested operation is not implemented.
//

  STATUS_NOT_IMPLEMENTED = NTSTATUS($C0000002);
  {$EXTERNALSYM STATUS_NOT_IMPLEMENTED}

//
// MessageId: STATUS_INVALID_INFO_CLASS
//
// MessageText:
//
//  {Invalid Parameter}
//  The specified information class is not a valid information class for the specified object.
//

  STATUS_INVALID_INFO_CLASS = NTSTATUS($C0000003); // ntsubauth
  {$EXTERNALSYM STATUS_INVALID_INFO_CLASS}

//
// MessageId: STATUS_INFO_LENGTH_MISMATCH
//
// MessageText:
//
//  The specified information record length does not match the length required for the specified information class.
//

  STATUS_INFO_LENGTH_MISMATCH = NTSTATUS($C0000004);
  {$EXTERNALSYM STATUS_INFO_LENGTH_MISMATCH}

//
// MessageId: STATUS_ACCESS_VIOLATION
//
// MessageText:
//
//  The instruction at "0x%08lx" referenced memory at "0x%08lx". The memory could not be "%s".
//

  STATUS_ACCESS_VIOLATION = NTSTATUS($C0000005); // winnt
  {$EXTERNALSYM STATUS_ACCESS_VIOLATION}

//
// MessageId: STATUS_IN_PAGE_ERROR
//
// MessageText:
//
//  The instruction at "0x%08lx" referenced memory at "0x%08lx". The required data was not placed into memory because of an I/O error status of "0x%08lx".
//

  STATUS_IN_PAGE_ERROR = NTSTATUS($C0000006); // winnt
  {$EXTERNALSYM STATUS_IN_PAGE_ERROR}

//
// MessageId: STATUS_PAGEFILE_QUOTA
//
// MessageText:
//
//  The pagefile quota for the process has been exhausted.
//

  STATUS_PAGEFILE_QUOTA = NTSTATUS($C0000007);
  {$EXTERNALSYM STATUS_PAGEFILE_QUOTA}

//
// MessageId: STATUS_INVALID_HANDLE
//
// MessageText:
//
//  An invalid HANDLE was specified.
//

  STATUS_INVALID_HANDLE = NTSTATUS($C0000008); // winnt
  {$EXTERNALSYM STATUS_INVALID_HANDLE}

//
// MessageId: STATUS_BAD_INITIAL_STACK
//
// MessageText:
//
//  An invalid initial stack was specified in a call to NtCreateThread.
//

  STATUS_BAD_INITIAL_STACK = NTSTATUS($C0000009);
  {$EXTERNALSYM STATUS_BAD_INITIAL_STACK}

//
// MessageId: STATUS_BAD_INITIAL_PC
//
// MessageText:
//
//  An invalid initial start address was specified in a call to NtCreateThread.
//

  STATUS_BAD_INITIAL_PC = NTSTATUS($C000000A);
  {$EXTERNALSYM STATUS_BAD_INITIAL_PC}

//
// MessageId: STATUS_INVALID_CID
//
// MessageText:
//
//  An invalid Client ID was specified.
//

  STATUS_INVALID_CID = NTSTATUS($C000000B);
  {$EXTERNALSYM STATUS_INVALID_CID}

//
// MessageId: STATUS_TIMER_NOT_CANCELED
//
// MessageText:
//
//  An attempt was made to cancel or set a timer that has an associated APC and the subject thread is not the thread that originally set the timer with an associated APC routine.
//

  STATUS_TIMER_NOT_CANCELED = NTSTATUS($C000000C);
  {$EXTERNALSYM STATUS_TIMER_NOT_CANCELED}

//
// MessageId: STATUS_INVALID_PARAMETER
//
// MessageText:
//
//  An invalid parameter was passed to a service or function.
//

  STATUS_INVALID_PARAMETER = NTSTATUS($C000000D);
  {$EXTERNALSYM STATUS_INVALID_PARAMETER}

//
// MessageId: STATUS_NO_SUCH_DEVICE
//
// MessageText:
//
//  A device which does not exist was specified.
//

  STATUS_NO_SUCH_DEVICE = NTSTATUS($C000000E);
  {$EXTERNALSYM STATUS_NO_SUCH_DEVICE}

//
// MessageId: STATUS_NO_SUCH_FILE
//
// MessageText:
//
//  {File Not Found}
//  The file %hs does not exist.
//

  STATUS_NO_SUCH_FILE = NTSTATUS($C000000F);
  {$EXTERNALSYM STATUS_NO_SUCH_FILE}

//
// MessageId: STATUS_INVALID_DEVICE_REQUEST
//
// MessageText:
//
//  The specified request is not a valid operation for the target device.
//

  STATUS_INVALID_DEVICE_REQUEST = NTSTATUS($C0000010);
  {$EXTERNALSYM STATUS_INVALID_DEVICE_REQUEST}

//
// MessageId: STATUS_END_OF_FILE
//
// MessageText:
//
//  The end-of-file marker has been reached. There is no valid data in the file beyond this marker.
//

  STATUS_END_OF_FILE = NTSTATUS($C0000011);
  {$EXTERNALSYM STATUS_END_OF_FILE}

//
// MessageId: STATUS_WRONG_VOLUME
//
// MessageText:
//
//  {Wrong Volume}
//  The wrong volume is in the drive.
//  Please insert volume %hs into drive %hs.
//

  STATUS_WRONG_VOLUME = NTSTATUS($C0000012);
  {$EXTERNALSYM STATUS_WRONG_VOLUME}

//
// MessageId: STATUS_NO_MEDIA_IN_DEVICE
//
// MessageText:
//
//  {No Disk}
//  There is no disk in the drive.
//  Please insert a disk into drive %hs.
//

  STATUS_NO_MEDIA_IN_DEVICE = NTSTATUS($C0000013);
  {$EXTERNALSYM STATUS_NO_MEDIA_IN_DEVICE}

//
// MessageId: STATUS_UNRECOGNIZED_MEDIA
//
// MessageText:
//
//  {Unknown Disk Format}
//  The disk in drive %hs is not formatted properly.
//  Please check the disk, and reformat if necessary.
//

  STATUS_UNRECOGNIZED_MEDIA = NTSTATUS($C0000014);
  {$EXTERNALSYM STATUS_UNRECOGNIZED_MEDIA}

//
// MessageId: STATUS_NONEXISTENT_SECTOR
//
// MessageText:
//
//  {Sector Not Found}
//  The specified sector does not exist.
//

  STATUS_NONEXISTENT_SECTOR = NTSTATUS($C0000015);
  {$EXTERNALSYM STATUS_NONEXISTENT_SECTOR}

//
// MessageId: STATUS_MORE_PROCESSING_REQUIRED
//
// MessageText:
//
//  {Still Busy}
//  The specified I/O request packet (IRP) cannot be disposed of because the I/O operation is not complete.
//

  STATUS_MORE_PROCESSING_REQUIRED = NTSTATUS($C0000016);
  {$EXTERNALSYM STATUS_MORE_PROCESSING_REQUIRED}

//
// MessageId: STATUS_NO_MEMORY
//
// MessageText:
//
//  {Not Enough Quota}
//  Not enough virtual memory or paging file quota is available to complete the specified operation.
//

  STATUS_NO_MEMORY = NTSTATUS($C0000017); // winnt
  {$EXTERNALSYM STATUS_NO_MEMORY}

//
// MessageId: STATUS_CONFLICTING_ADDRESSES
//
// MessageText:
//
//  {Conflicting Address Range}
//  The specified address range conflicts with the address space.
//

  STATUS_CONFLICTING_ADDRESSES = NTSTATUS($C0000018);
  {$EXTERNALSYM STATUS_CONFLICTING_ADDRESSES}

//
// MessageId: STATUS_NOT_MAPPED_VIEW
//
// MessageText:
//
//  Address range to unmap is not a mapped view.
//

  STATUS_NOT_MAPPED_VIEW = NTSTATUS($C0000019);
  {$EXTERNALSYM STATUS_NOT_MAPPED_VIEW}

//
// MessageId: STATUS_UNABLE_TO_FREE_VM
//
// MessageText:
//
//  Virtual memory cannot be freed.
//

  STATUS_UNABLE_TO_FREE_VM = NTSTATUS($C000001A);
  {$EXTERNALSYM STATUS_UNABLE_TO_FREE_VM}

//
// MessageId: STATUS_UNABLE_TO_DELETE_SECTION
//
// MessageText:
//
//  Specified section cannot be deleted.
//

  STATUS_UNABLE_TO_DELETE_SECTION = NTSTATUS($C000001B);
  {$EXTERNALSYM STATUS_UNABLE_TO_DELETE_SECTION}

//
// MessageId: STATUS_INVALID_SYSTEM_SERVICE
//
// MessageText:
//
//  An invalid system service was specified in a system service call.
//

  STATUS_INVALID_SYSTEM_SERVICE = NTSTATUS($C000001C);
  {$EXTERNALSYM STATUS_INVALID_SYSTEM_SERVICE}

//
// MessageId: STATUS_ILLEGAL_INSTRUCTION
//
// MessageText:
//
//  {EXCEPTION}
//  Illegal Instruction
//  An attempt was made to execute an illegal instruction.
//

  STATUS_ILLEGAL_INSTRUCTION = NTSTATUS($C000001D); // winnt
  {$EXTERNALSYM STATUS_ILLEGAL_INSTRUCTION}

//
// MessageId: STATUS_INVALID_LOCK_SEQUENCE
//
// MessageText:
//
//  {Invalid Lock Sequence}
//  An attempt was made to execute an invalid lock sequence.
//

  STATUS_INVALID_LOCK_SEQUENCE = NTSTATUS($C000001E);
  {$EXTERNALSYM STATUS_INVALID_LOCK_SEQUENCE}

//
// MessageId: STATUS_INVALID_VIEW_SIZE
//
// MessageText:
//
//  {Invalid Mapping}
//  An attempt was made to create a view for a section which is bigger than the section.
//

  STATUS_INVALID_VIEW_SIZE = NTSTATUS($C000001F);
  {$EXTERNALSYM STATUS_INVALID_VIEW_SIZE}

//
// MessageId: STATUS_INVALID_FILE_FOR_SECTION
//
// MessageText:
//
//  {Bad File}
//  The attributes of the specified mapping file for a section of memory cannot be read.
//

  STATUS_INVALID_FILE_FOR_SECTION = NTSTATUS($C0000020);
  {$EXTERNALSYM STATUS_INVALID_FILE_FOR_SECTION}

//
// MessageId: STATUS_ALREADY_COMMITTED
//
// MessageText:
//
//  {Already Committed}
//  The specified address range is already committed.
//

  STATUS_ALREADY_COMMITTED = NTSTATUS($C0000021);
  {$EXTERNALSYM STATUS_ALREADY_COMMITTED}

//
// MessageId: STATUS_ACCESS_DENIED
//
// MessageText:
//
//  {Access Denied}
//  A process has requested access to an object, but has not been granted those access rights.
//

  STATUS_ACCESS_DENIED = NTSTATUS($C0000022);
  {$EXTERNALSYM STATUS_ACCESS_DENIED}

//
// MessageId: STATUS_BUFFER_TOO_SMALL
//
// MessageText:
//
//  {Buffer Too Small}
//  The buffer is too small to contain the entry. No information has been written to the buffer.
//

  STATUS_BUFFER_TOO_SMALL = NTSTATUS($C0000023);
  {$EXTERNALSYM STATUS_BUFFER_TOO_SMALL}

//
// MessageId: STATUS_OBJECT_TYPE_MISMATCH
//
// MessageText:
//
//  {Wrong Type}
//  There is a mismatch between the type of object required by the requested operation and the type of object that is specified in the request.
//

  STATUS_OBJECT_TYPE_MISMATCH = NTSTATUS($C0000024);
  {$EXTERNALSYM STATUS_OBJECT_TYPE_MISMATCH}

//
// MessageId: STATUS_NONCONTINUABLE_EXCEPTION
//
// MessageText:
//
//  {EXCEPTION}
//  Cannot Continue
//  Windows cannot continue from this exception.
//

  STATUS_NONCONTINUABLE_EXCEPTION = NTSTATUS($C0000025); // winnt
  {$EXTERNALSYM STATUS_NONCONTINUABLE_EXCEPTION}

//
// MessageId: STATUS_INVALID_DISPOSITION
//
// MessageText:
//
//  An invalid exception disposition was returned by an exception handler.
//

  STATUS_INVALID_DISPOSITION = NTSTATUS($C0000026); // winnt
  {$EXTERNALSYM STATUS_INVALID_DISPOSITION}

//
// MessageId: STATUS_UNWIND
//
// MessageText:
//
//  Unwind exception code.
//

  STATUS_UNWIND = NTSTATUS($C0000027);
  {$EXTERNALSYM STATUS_UNWIND}

//
// MessageId: STATUS_BAD_STACK
//
// MessageText:
//
//  An invalid or unaligned stack was encountered during an unwind operation.
//

  STATUS_BAD_STACK = NTSTATUS($C0000028);
  {$EXTERNALSYM STATUS_BAD_STACK}

//
// MessageId: STATUS_INVALID_UNWIND_TARGET
//
// MessageText:
//
//  An invalid unwind target was encountered during an unwind operation.
//

  STATUS_INVALID_UNWIND_TARGET = NTSTATUS($C0000029);
  {$EXTERNALSYM STATUS_INVALID_UNWIND_TARGET}

//
// MessageId: STATUS_NOT_LOCKED
//
// MessageText:
//
//  An attempt was made to unlock a page of memory which was not locked.
//

  STATUS_NOT_LOCKED = NTSTATUS($C000002A);
  {$EXTERNALSYM STATUS_NOT_LOCKED}

//
// MessageId: STATUS_PARITY_ERROR
//
// MessageText:
//
//  Device parity error on I/O operation.
//

  STATUS_PARITY_ERROR = NTSTATUS($C000002B);
  {$EXTERNALSYM STATUS_PARITY_ERROR}

//
// MessageId: STATUS_UNABLE_TO_DECOMMIT_VM
//
// MessageText:
//
//  An attempt was made to decommit uncommitted virtual memory.
//

  STATUS_UNABLE_TO_DECOMMIT_VM = NTSTATUS($C000002C);
  {$EXTERNALSYM STATUS_UNABLE_TO_DECOMMIT_VM}

//
// MessageId: STATUS_NOT_COMMITTED
//
// MessageText:
//
//  An attempt was made to change the attributes on memory that has not been committed.
//

  STATUS_NOT_COMMITTED = NTSTATUS($C000002D);
  {$EXTERNALSYM STATUS_NOT_COMMITTED}

//
// MessageId: STATUS_INVALID_PORT_ATTRIBUTES
//
// MessageText:
//
//  Invalid Object Attributes specified to NtCreatePort or invalid Port Attributes specified to NtConnectPort
//

  STATUS_INVALID_PORT_ATTRIBUTES = NTSTATUS($C000002E);
  {$EXTERNALSYM STATUS_INVALID_PORT_ATTRIBUTES}

//
// MessageId: STATUS_PORT_MESSAGE_TOO_LONG
//
// MessageText:
//
//  Length of message passed to NtRequestPort or NtRequestWaitReplyPort was longer than the maximum message allowed by the port.
//

  STATUS_PORT_MESSAGE_TOO_LONG = NTSTATUS($C000002F);
  {$EXTERNALSYM STATUS_PORT_MESSAGE_TOO_LONG}

//
// MessageId: STATUS_INVALID_PARAMETER_MIX
//
// MessageText:
//
//  An invalid combination of parameters was specified.
//

  STATUS_INVALID_PARAMETER_MIX = NTSTATUS($C0000030);
  {$EXTERNALSYM STATUS_INVALID_PARAMETER_MIX}

//
// MessageId: STATUS_INVALID_QUOTA_LOWER
//
// MessageText:
//
//  An attempt was made to lower a quota limit below the current usage.
//

  STATUS_INVALID_QUOTA_LOWER = NTSTATUS($C0000031);
  {$EXTERNALSYM STATUS_INVALID_QUOTA_LOWER}

//
// MessageId: STATUS_DISK_CORRUPT_ERROR
//
// MessageText:
//
//  {Corrupt Disk}
//  The file system structure on the disk is corrupt and unusable.
//  Please run the Chkdsk utility on the volume %hs.
//

  STATUS_DISK_CORRUPT_ERROR = NTSTATUS($C0000032);
  {$EXTERNALSYM STATUS_DISK_CORRUPT_ERROR}

//
// MessageId: STATUS_OBJECT_NAME_INVALID
//
// MessageText:
//
//  Object Name invalid.
//

  STATUS_OBJECT_NAME_INVALID = NTSTATUS($C0000033);
  {$EXTERNALSYM STATUS_OBJECT_NAME_INVALID}

//
// MessageId: STATUS_OBJECT_NAME_NOT_FOUND
//
// MessageText:
//
//  Object Name not found.
//

  STATUS_OBJECT_NAME_NOT_FOUND = NTSTATUS($C0000034);
  {$EXTERNALSYM STATUS_OBJECT_NAME_NOT_FOUND}

//
// MessageId: STATUS_OBJECT_NAME_COLLISION
//
// MessageText:
//
//  Object Name already exists.
//

  STATUS_OBJECT_NAME_COLLISION = NTSTATUS($C0000035);
  {$EXTERNALSYM STATUS_OBJECT_NAME_COLLISION}

//
// MessageId: STATUS_PORT_DISCONNECTED
//
// MessageText:
//
//  Attempt to send a message to a disconnected communication port.
//

  STATUS_PORT_DISCONNECTED = NTSTATUS($C0000037);
  {$EXTERNALSYM STATUS_PORT_DISCONNECTED}

//
// MessageId: STATUS_DEVICE_ALREADY_ATTACHED
//
// MessageText:
//
//  An attempt was made to attach to a device that was already attached to another device.
//

  STATUS_DEVICE_ALREADY_ATTACHED = NTSTATUS($C0000038);
  {$EXTERNALSYM STATUS_DEVICE_ALREADY_ATTACHED}

//
// MessageId: STATUS_OBJECT_PATH_INVALID
//
// MessageText:
//
//  Object Path Component was not a directory object.
//

  STATUS_OBJECT_PATH_INVALID = NTSTATUS($C0000039);
  {$EXTERNALSYM STATUS_OBJECT_PATH_INVALID}

//
// MessageId: STATUS_OBJECT_PATH_NOT_FOUND
//
// MessageText:
//
//  {Path Not Found}
//  The path %hs does not exist.
//

  STATUS_OBJECT_PATH_NOT_FOUND = NTSTATUS($C000003A);
  {$EXTERNALSYM STATUS_OBJECT_PATH_NOT_FOUND}

//
// MessageId: STATUS_OBJECT_PATH_SYNTAX_BAD
//
// MessageText:
//
//  Object Path Component was not a directory object.
//

  STATUS_OBJECT_PATH_SYNTAX_BAD = NTSTATUS($C000003B);
  {$EXTERNALSYM STATUS_OBJECT_PATH_SYNTAX_BAD}

//
// MessageId: STATUS_DATA_OVERRUN
//
// MessageText:
//
//  {Data Overrun}
//  A data overrun error occurred.
//

  STATUS_DATA_OVERRUN = NTSTATUS($C000003C);
  {$EXTERNALSYM STATUS_DATA_OVERRUN}

//
// MessageId: STATUS_DATA_LATE_ERROR
//
// MessageText:
//
//  {Data Late}
//  A data late error occurred.
//

  STATUS_DATA_LATE_ERROR = NTSTATUS($C000003D);
  {$EXTERNALSYM STATUS_DATA_LATE_ERROR}

//
// MessageId: STATUS_DATA_ERROR
//
// MessageText:
//
//  {Data Error}
//  An error in reading or writing data occurred.
//

  STATUS_DATA_ERROR = NTSTATUS($C000003E);
  {$EXTERNALSYM STATUS_DATA_ERROR}

//
// MessageId: STATUS_CRC_ERROR
//
// MessageText:
//
//  {Bad CRC}
//  A cyclic redundancy check (CRC) checksum error occurred.
//

  STATUS_CRC_ERROR = NTSTATUS($C000003F);
  {$EXTERNALSYM STATUS_CRC_ERROR}

//
// MessageId: STATUS_SECTION_TOO_BIG
//
// MessageText:
//
//  {Section Too Large}
//  The specified section is too big to map the file.
//

  STATUS_SECTION_TOO_BIG = NTSTATUS($C0000040);
  {$EXTERNALSYM STATUS_SECTION_TOO_BIG}

//
// MessageId: STATUS_PORT_CONNECTION_REFUSED
//
// MessageText:
//
//  The NtConnectPort request is refused.
//

  STATUS_PORT_CONNECTION_REFUSED = NTSTATUS($C0000041);
  {$EXTERNALSYM STATUS_PORT_CONNECTION_REFUSED}

//
// MessageId: STATUS_INVALID_PORT_HANDLE
//
// MessageText:
//
//  The type of port handle is invalid for the operation requested.
//

  STATUS_INVALID_PORT_HANDLE = NTSTATUS($C0000042);
  {$EXTERNALSYM STATUS_INVALID_PORT_HANDLE}

//
// MessageId: STATUS_SHARING_VIOLATION
//
// MessageText:
//
//  A file cannot be opened because the share access flags are incompatible.
//

  STATUS_SHARING_VIOLATION = NTSTATUS($C0000043);
  {$EXTERNALSYM STATUS_SHARING_VIOLATION}

//
// MessageId: STATUS_QUOTA_EXCEEDED
//
// MessageText:
//
//  Insufficient quota exists to complete the operation
//

  STATUS_QUOTA_EXCEEDED = NTSTATUS($C0000044);
  {$EXTERNALSYM STATUS_QUOTA_EXCEEDED}

//
// MessageId: STATUS_INVALID_PAGE_PROTECTION
//
// MessageText:
//
//  The specified page protection was not valid.
//

  STATUS_INVALID_PAGE_PROTECTION = NTSTATUS($C0000045);
  {$EXTERNALSYM STATUS_INVALID_PAGE_PROTECTION}

//
// MessageId: STATUS_MUTANT_NOT_OWNED
//
// MessageText:
//
//  An attempt to release a mutant object was made by a thread that was not the owner of the mutant object.
//

  STATUS_MUTANT_NOT_OWNED = NTSTATUS($C0000046);
  {$EXTERNALSYM STATUS_MUTANT_NOT_OWNED}

//
// MessageId: STATUS_SEMAPHORE_LIMIT_EXCEEDED
//
// MessageText:
//
//  An attempt was made to release a semaphore such that its maximum count would have been exceeded.
//

  STATUS_SEMAPHORE_LIMIT_EXCEEDED = NTSTATUS($C0000047);
  {$EXTERNALSYM STATUS_SEMAPHORE_LIMIT_EXCEEDED}

//
// MessageId: STATUS_PORT_ALREADY_SET
//
// MessageText:
//
//  An attempt to set a processes DebugPort or ExceptionPort was made, but a port already exists in the process.
//

  STATUS_PORT_ALREADY_SET = NTSTATUS($C0000048);
  {$EXTERNALSYM STATUS_PORT_ALREADY_SET}

//
// MessageId: STATUS_SECTION_NOT_IMAGE
//
// MessageText:
//
//  An attempt was made to query image information on a section which does not map an image.
//

  STATUS_SECTION_NOT_IMAGE = NTSTATUS($C0000049);
  {$EXTERNALSYM STATUS_SECTION_NOT_IMAGE}

//
// MessageId: STATUS_SUSPEND_COUNT_EXCEEDED
//
// MessageText:
//
//  An attempt was made to suspend a thread whose suspend count was at its maximum.
//

  STATUS_SUSPEND_COUNT_EXCEEDED = NTSTATUS($C000004A);
  {$EXTERNALSYM STATUS_SUSPEND_COUNT_EXCEEDED}

//
// MessageId: STATUS_THREAD_IS_TERMINATING
//
// MessageText:
//
//  An attempt was made to suspend a thread that has begun termination.
//

  STATUS_THREAD_IS_TERMINATING = NTSTATUS($C000004B);
  {$EXTERNALSYM STATUS_THREAD_IS_TERMINATING}

//
// MessageId: STATUS_BAD_WORKING_SET_LIMIT
//
// MessageText:
//
//  An attempt was made to set the working set limit to an invalid value (minimum greater than maximum, etc).
//

  STATUS_BAD_WORKING_SET_LIMIT = NTSTATUS($C000004C);
  {$EXTERNALSYM STATUS_BAD_WORKING_SET_LIMIT}

//
// MessageId: STATUS_INCOMPATIBLE_FILE_MAP
//
// MessageText:
//
//  A section was created to map a file which is not compatible to an already existing section which maps the same file.
//

  STATUS_INCOMPATIBLE_FILE_MAP = NTSTATUS($C000004D);
  {$EXTERNALSYM STATUS_INCOMPATIBLE_FILE_MAP}

//
// MessageId: STATUS_SECTION_PROTECTION
//
// MessageText:
//
//  A view to a section specifies a protection which is incompatible with the initial view's protection.
//

  STATUS_SECTION_PROTECTION = NTSTATUS($C000004E);
  {$EXTERNALSYM STATUS_SECTION_PROTECTION}

//
// MessageId: STATUS_EAS_NOT_SUPPORTED
//
// MessageText:
//
//  An operation involving EAs failed because the file system does not support EAs.
//

  STATUS_EAS_NOT_SUPPORTED = NTSTATUS($C000004F);
  {$EXTERNALSYM STATUS_EAS_NOT_SUPPORTED}

//
// MessageId: STATUS_EA_TOO_LARGE
//
// MessageText:
//
//  An EA operation failed because EA set is too large.
//

  STATUS_EA_TOO_LARGE = NTSTATUS($C0000050);
  {$EXTERNALSYM STATUS_EA_TOO_LARGE}

//
// MessageId: STATUS_NONEXISTENT_EA_ENTRY
//
// MessageText:
//
//  An EA operation failed because the name or EA index is invalid.
//

  STATUS_NONEXISTENT_EA_ENTRY = NTSTATUS($C0000051);
  {$EXTERNALSYM STATUS_NONEXISTENT_EA_ENTRY}

//
// MessageId: STATUS_NO_EAS_ON_FILE
//
// MessageText:
//
//  The file for which EAs were requested has no EAs.
//

  STATUS_NO_EAS_ON_FILE = NTSTATUS($C0000052);
  {$EXTERNALSYM STATUS_NO_EAS_ON_FILE}

//
// MessageId: STATUS_EA_CORRUPT_ERROR
//
// MessageText:
//
//  The EA is corrupt and non-readable.
//

  STATUS_EA_CORRUPT_ERROR = NTSTATUS($C0000053);
  {$EXTERNALSYM STATUS_EA_CORRUPT_ERROR}

//
// MessageId: STATUS_FILE_LOCK_CONFLICT
//
// MessageText:
//
//  A requested read/write cannot be granted due to a conflicting file lock.
//

  STATUS_FILE_LOCK_CONFLICT = NTSTATUS($C0000054);
  {$EXTERNALSYM STATUS_FILE_LOCK_CONFLICT}

//
// MessageId: STATUS_LOCK_NOT_GRANTED
//
// MessageText:
//
//  A requested file lock cannot be granted due to other existing locks.
//

  STATUS_LOCK_NOT_GRANTED = NTSTATUS($C0000055);
  {$EXTERNALSYM STATUS_LOCK_NOT_GRANTED}

//
// MessageId: STATUS_DELETE_PENDING
//
// MessageText:
//
//  A non close operation has been requested of a file object with a delete pending.
//

  STATUS_DELETE_PENDING = NTSTATUS($C0000056);
  {$EXTERNALSYM STATUS_DELETE_PENDING}

//
// MessageId: STATUS_CTL_FILE_NOT_SUPPORTED
//
// MessageText:
//
//  An attempt was made to set the control attribute on a file. This attribute is not supported in the target file system.
//

  STATUS_CTL_FILE_NOT_SUPPORTED = NTSTATUS($C0000057);
  {$EXTERNALSYM STATUS_CTL_FILE_NOT_SUPPORTED}

//
// MessageId: STATUS_UNKNOWN_REVISION
//
// MessageText:
//
//  Indicates a revision number encountered or specified is not one known by the service. It may be a more recent revision than the service is aware of.
//

  STATUS_UNKNOWN_REVISION = NTSTATUS($C0000058);
  {$EXTERNALSYM STATUS_UNKNOWN_REVISION}

//
// MessageId: STATUS_REVISION_MISMATCH
//
// MessageText:
//
//  Indicates two revision levels are incompatible.
//

  STATUS_REVISION_MISMATCH = NTSTATUS($C0000059);
  {$EXTERNALSYM STATUS_REVISION_MISMATCH}

//
// MessageId: STATUS_INVALID_OWNER
//
// MessageText:
//
//  Indicates a particular Security ID may not be assigned as the owner of an object.
//

  STATUS_INVALID_OWNER = NTSTATUS($C000005A);
  {$EXTERNALSYM STATUS_INVALID_OWNER}

//
// MessageId: STATUS_INVALID_PRIMARY_GROUP
//
// MessageText:
//
//  Indicates a particular Security ID may not be assigned as the primary group of an object.
//

  STATUS_INVALID_PRIMARY_GROUP = NTSTATUS($C000005B);
  {$EXTERNALSYM STATUS_INVALID_PRIMARY_GROUP}

//
// MessageId: STATUS_NO_IMPERSONATION_TOKEN
//
// MessageText:
//
//  An attempt has been made to operate on an impersonation token by a thread that is not currently impersonating a client.
//

  STATUS_NO_IMPERSONATION_TOKEN = NTSTATUS($C000005C);
  {$EXTERNALSYM STATUS_NO_IMPERSONATION_TOKEN}

//
// MessageId: STATUS_CANT_DISABLE_MANDATORY
//
// MessageText:
//
//  A mandatory group may not be disabled.
//

  STATUS_CANT_DISABLE_MANDATORY = NTSTATUS($C000005D);
  {$EXTERNALSYM STATUS_CANT_DISABLE_MANDATORY}

//
// MessageId: STATUS_NO_LOGON_SERVERS
//
// MessageText:
//
//  There are currently no logon servers available to service the logon request.
//

  STATUS_NO_LOGON_SERVERS = NTSTATUS($C000005E);
  {$EXTERNALSYM STATUS_NO_LOGON_SERVERS}

//
// MessageId: STATUS_NO_SUCH_LOGON_SESSION
//
// MessageText:
//
//  A specified logon session does not exist. It may already have been terminated.
//

  STATUS_NO_SUCH_LOGON_SESSION = NTSTATUS($C000005F);
  {$EXTERNALSYM STATUS_NO_SUCH_LOGON_SESSION}

//
// MessageId: STATUS_NO_SUCH_PRIVILEGE
//
// MessageText:
//
//  A specified privilege does not exist.
//

  STATUS_NO_SUCH_PRIVILEGE = NTSTATUS($C0000060);
  {$EXTERNALSYM STATUS_NO_SUCH_PRIVILEGE}

//
// MessageId: STATUS_PRIVILEGE_NOT_HELD
//
// MessageText:
//
//  A required privilege is not held by the client.
//

  STATUS_PRIVILEGE_NOT_HELD = NTSTATUS($C0000061);
  {$EXTERNALSYM STATUS_PRIVILEGE_NOT_HELD}

//
// MessageId: STATUS_INVALID_ACCOUNT_NAME
//
// MessageText:
//
//  The name provided is not a properly formed account name.
//

  STATUS_INVALID_ACCOUNT_NAME = NTSTATUS($C0000062);
  {$EXTERNALSYM STATUS_INVALID_ACCOUNT_NAME}

//
// MessageId: STATUS_USER_EXISTS
//
// MessageText:
//
//  The specified user already exists.
//

  STATUS_USER_EXISTS = NTSTATUS($C0000063);
  {$EXTERNALSYM STATUS_USER_EXISTS}

//
// MessageId: STATUS_NO_SUCH_USER
//
// MessageText:
//
//  The specified user does not exist.
//

  STATUS_NO_SUCH_USER = NTSTATUS($C0000064); // ntsubauth
  {$EXTERNALSYM STATUS_NO_SUCH_USER}

//
// MessageId: STATUS_GROUP_EXISTS
//
// MessageText:
//
//  The specified group already exists.
//

  STATUS_GROUP_EXISTS = NTSTATUS($C0000065);
  {$EXTERNALSYM STATUS_GROUP_EXISTS}

//
// MessageId: STATUS_NO_SUCH_GROUP
//
// MessageText:
//
//  The specified group does not exist.
//

  STATUS_NO_SUCH_GROUP = NTSTATUS($C0000066);
  {$EXTERNALSYM STATUS_NO_SUCH_GROUP}

//
// MessageId: STATUS_MEMBER_IN_GROUP
//
// MessageText:
//
//  The specified user account is already in the specified group account.
//  Also used to indicate a group cannot be deleted because it contains a member.
//

  STATUS_MEMBER_IN_GROUP = NTSTATUS($C0000067);
  {$EXTERNALSYM STATUS_MEMBER_IN_GROUP}

//
// MessageId: STATUS_MEMBER_NOT_IN_GROUP
//
// MessageText:
//
//  The specified user account is not a member of the specified group account.
//

  STATUS_MEMBER_NOT_IN_GROUP = NTSTATUS($C0000068);
  {$EXTERNALSYM STATUS_MEMBER_NOT_IN_GROUP}

//
// MessageId: STATUS_LAST_ADMIN
//
// MessageText:
//
//  Indicates the requested operation would disable or delete the last remaining administration account.
//  This is not allowed to prevent creating a situation in which the system cannot be administrated.
//

  STATUS_LAST_ADMIN = NTSTATUS($C0000069);
  {$EXTERNALSYM STATUS_LAST_ADMIN}

//
// MessageId: STATUS_WRONG_PASSWORD
//
// MessageText:
//
//  When trying to update a password, this return status indicates that the value provided as the current password is not correct.
//

  STATUS_WRONG_PASSWORD = NTSTATUS($C000006A); // ntsubauth
  {$EXTERNALSYM STATUS_WRONG_PASSWORD}

//
// MessageId: STATUS_ILL_FORMED_PASSWORD
//
// MessageText:
//
//  When trying to update a password, this return status indicates that the value provided for the new password contains values that are not allowed in passwords.
//

  STATUS_ILL_FORMED_PASSWORD = NTSTATUS($C000006B);
  {$EXTERNALSYM STATUS_ILL_FORMED_PASSWORD}

//
// MessageId: STATUS_PASSWORD_RESTRICTION
//
// MessageText:
//
//  When trying to update a password, this status indicates that some password update rule has been violated. For example, the password may not meet length criteria.
//

  STATUS_PASSWORD_RESTRICTION = NTSTATUS($C000006C); // ntsubauth
  {$EXTERNALSYM STATUS_PASSWORD_RESTRICTION}

//
// MessageId: STATUS_LOGON_FAILURE
//
// MessageText:
//
//  The attempted logon is invalid. This is either due to a bad username or authentication information.
//

  STATUS_LOGON_FAILURE = NTSTATUS($C000006D); // ntsubauth
  {$EXTERNALSYM STATUS_LOGON_FAILURE}

//
// MessageId: STATUS_ACCOUNT_RESTRICTION
//
// MessageText:
//
//  Indicates a referenced user name and authentication information are valid, but some user account restriction has prevented successful authentication (such as time-of-day restrictions).
//

  STATUS_ACCOUNT_RESTRICTION = NTSTATUS($C000006E); // ntsubauth
  {$EXTERNALSYM STATUS_ACCOUNT_RESTRICTION}

//
// MessageId: STATUS_INVALID_LOGON_HOURS
//
// MessageText:
//
//  The user account has time restrictions and may not be logged onto at this time.
//

  STATUS_INVALID_LOGON_HOURS = NTSTATUS($C000006F); // ntsubauth
  {$EXTERNALSYM STATUS_INVALID_LOGON_HOURS}

//
// MessageId: STATUS_INVALID_WORKSTATION
//
// MessageText:
//
//  The user account is restricted such that it may not be used to log on from the source workstation.
//

  STATUS_INVALID_WORKSTATION = NTSTATUS($C0000070); // ntsubauth
  {$EXTERNALSYM STATUS_INVALID_WORKSTATION}

//
// MessageId: STATUS_PASSWORD_EXPIRED
//
// MessageText:
//
//  The user account's password has expired.
//

  STATUS_PASSWORD_EXPIRED = NTSTATUS($C0000071); // ntsubauth
  {$EXTERNALSYM STATUS_PASSWORD_EXPIRED}

//
// MessageId: STATUS_ACCOUNT_DISABLED
//
// MessageText:
//
//  The referenced account is currently disabled and may not be logged on to.
//

  STATUS_ACCOUNT_DISABLED = NTSTATUS($C0000072); // ntsubauth
  {$EXTERNALSYM STATUS_ACCOUNT_DISABLED}

//
// MessageId: STATUS_NONE_MAPPED
//
// MessageText:
//
//  None of the information to be translated has been translated.
//

  STATUS_NONE_MAPPED = NTSTATUS($C0000073);
  {$EXTERNALSYM STATUS_NONE_MAPPED}

//
// MessageId: STATUS_TOO_MANY_LUIDS_REQUESTED
//
// MessageText:
//
//  The number of LUIDs requested may not be allocated with a single allocation.
//

  STATUS_TOO_MANY_LUIDS_REQUESTED = NTSTATUS($C0000074);
  {$EXTERNALSYM STATUS_TOO_MANY_LUIDS_REQUESTED}

//
// MessageId: STATUS_LUIDS_EXHAUSTED
//
// MessageText:
//
//  Indicates there are no more LUIDs to allocate.
//

  STATUS_LUIDS_EXHAUSTED = NTSTATUS($C0000075);
  {$EXTERNALSYM STATUS_LUIDS_EXHAUSTED}

//
// MessageId: STATUS_INVALID_SUB_AUTHORITY
//
// MessageText:
//
//  Indicates the sub-authority value is invalid for the particular use.
//

  STATUS_INVALID_SUB_AUTHORITY = NTSTATUS($C0000076);
  {$EXTERNALSYM STATUS_INVALID_SUB_AUTHORITY}

//
// MessageId: STATUS_INVALID_ACL
//
// MessageText:
//
//  Indicates the ACL structure is not valid.
//

  STATUS_INVALID_ACL = NTSTATUS($C0000077);
  {$EXTERNALSYM STATUS_INVALID_ACL}

//
// MessageId: STATUS_INVALID_SID
//
// MessageText:
//
//  Indicates the SID structure is not valid.
//

  STATUS_INVALID_SID = NTSTATUS($C0000078);
  {$EXTERNALSYM STATUS_INVALID_SID}

//
// MessageId: STATUS_INVALID_SECURITY_DESCR
//
// MessageText:
//
//  Indicates the SECURITY_DESCRIPTOR structure is not valid.
//

  STATUS_INVALID_SECURITY_DESCR = NTSTATUS($C0000079);
  {$EXTERNALSYM STATUS_INVALID_SECURITY_DESCR}

//
// MessageId: STATUS_PROCEDURE_NOT_FOUND
//
// MessageText:
//
//  Indicates the specified procedure address cannot be found in the DLL.
//

  STATUS_PROCEDURE_NOT_FOUND = NTSTATUS($C000007A);
  {$EXTERNALSYM STATUS_PROCEDURE_NOT_FOUND}

//
// MessageId: STATUS_INVALID_IMAGE_FORMAT
//
// MessageText:
//
//  {Bad Image}
//  The application or DLL %hs is not a valid Windows image. Please check this against your installation diskette.
//

  STATUS_INVALID_IMAGE_FORMAT = NTSTATUS($C000007B);
  {$EXTERNALSYM STATUS_INVALID_IMAGE_FORMAT}

//
// MessageId: STATUS_NO_TOKEN
//
// MessageText:
//
//  An attempt was made to reference a token that doesn't exist.
//  This is typically done by referencing the token associated with a thread when the thread is not impersonating a client.
//

  STATUS_NO_TOKEN = NTSTATUS($C000007C);
  {$EXTERNALSYM STATUS_NO_TOKEN}

//
// MessageId: STATUS_BAD_INHERITANCE_ACL
//
// MessageText:
//
//  Indicates that an attempt to build either an inherited ACL or ACE was not successful.
//  This can be caused by a number of things. One of the more probable causes is the replacement of a CreatorId with an SID that didn't fit into the ACE or ACL.
//

  STATUS_BAD_INHERITANCE_ACL = NTSTATUS($C000007D);
  {$EXTERNALSYM STATUS_BAD_INHERITANCE_ACL}

//
// MessageId: STATUS_RANGE_NOT_LOCKED
//
// MessageText:
//
//  The range specified in NtUnlockFile was not locked.
//

  STATUS_RANGE_NOT_LOCKED = NTSTATUS($C000007E);
  {$EXTERNALSYM STATUS_RANGE_NOT_LOCKED}

//
// MessageId: STATUS_DISK_FULL
//
// MessageText:
//
//  An operation failed because the disk was full.
//

  STATUS_DISK_FULL = NTSTATUS($C000007F);
  {$EXTERNALSYM STATUS_DISK_FULL}

//
// MessageId: STATUS_SERVER_DISABLED
//
// MessageText:
//
//  The GUID allocation server is [already] disabled at the moment.
//

  STATUS_SERVER_DISABLED = NTSTATUS($C0000080);
  {$EXTERNALSYM STATUS_SERVER_DISABLED}

//
// MessageId: STATUS_SERVER_NOT_DISABLED
//
// MessageText:
//
//  The GUID allocation server is [already] enabled at the moment.
//

  STATUS_SERVER_NOT_DISABLED = NTSTATUS($C0000081);
  {$EXTERNALSYM STATUS_SERVER_NOT_DISABLED}

//
// MessageId: STATUS_TOO_MANY_GUIDS_REQUESTED
//
// MessageText:
//
//  Too many GUIDs were requested from the allocation server at once.
//

  STATUS_TOO_MANY_GUIDS_REQUESTED = NTSTATUS($C0000082);
  {$EXTERNALSYM STATUS_TOO_MANY_GUIDS_REQUESTED}

//
// MessageId: STATUS_GUIDS_EXHAUSTED
//
// MessageText:
//
//  The GUIDs could not be allocated because the Authority Agent was exhausted.
//

  STATUS_GUIDS_EXHAUSTED = NTSTATUS($C0000083);
  {$EXTERNALSYM STATUS_GUIDS_EXHAUSTED}

//
// MessageId: STATUS_INVALID_ID_AUTHORITY
//
// MessageText:
//
//  The value provided was an invalid value for an identifier authority.
//

  STATUS_INVALID_ID_AUTHORITY = NTSTATUS($C0000084);
  {$EXTERNALSYM STATUS_INVALID_ID_AUTHORITY}

//
// MessageId: STATUS_AGENTS_EXHAUSTED
//
// MessageText:
//
//  There are no more authority agent values available for the given identifier authority value.
//

  STATUS_AGENTS_EXHAUSTED = NTSTATUS($C0000085);
  {$EXTERNALSYM STATUS_AGENTS_EXHAUSTED}

//
// MessageId: STATUS_INVALID_VOLUME_LABEL
//
// MessageText:
//
//  An invalid volume label has been specified.
//

  STATUS_INVALID_VOLUME_LABEL = NTSTATUS($C0000086);
  {$EXTERNALSYM STATUS_INVALID_VOLUME_LABEL}

//
// MessageId: STATUS_SECTION_NOT_EXTENDED
//
// MessageText:
//
//  A mapped section could not be extended.
//

  STATUS_SECTION_NOT_EXTENDED = NTSTATUS($C0000087);
  {$EXTERNALSYM STATUS_SECTION_NOT_EXTENDED}

//
// MessageId: STATUS_NOT_MAPPED_DATA
//
// MessageText:
//
//  Specified section to flush does not map a data file.
//

  STATUS_NOT_MAPPED_DATA = NTSTATUS($C0000088);
  {$EXTERNALSYM STATUS_NOT_MAPPED_DATA}

//
// MessageId: STATUS_RESOURCE_DATA_NOT_FOUND
//
// MessageText:
//
//  Indicates the specified image file did not contain a resource section.
//

  STATUS_RESOURCE_DATA_NOT_FOUND = NTSTATUS($C0000089);
  {$EXTERNALSYM STATUS_RESOURCE_DATA_NOT_FOUND}

//
// MessageId: STATUS_RESOURCE_TYPE_NOT_FOUND
//
// MessageText:
//
//  Indicates the specified resource type cannot be found in the image file.
//

  STATUS_RESOURCE_TYPE_NOT_FOUND = NTSTATUS($C000008A);
  {$EXTERNALSYM STATUS_RESOURCE_TYPE_NOT_FOUND}

//
// MessageId: STATUS_RESOURCE_NAME_NOT_FOUND
//
// MessageText:
//
//  Indicates the specified resource name cannot be found in the image file.
//

  STATUS_RESOURCE_NAME_NOT_FOUND = NTSTATUS($C000008B);
  {$EXTERNALSYM STATUS_RESOURCE_NAME_NOT_FOUND}

//
// MessageId: STATUS_ARRAY_BOUNDS_EXCEEDED
//
// MessageText:
//
//  {EXCEPTION}
//  Array bounds exceeded.
//

  STATUS_ARRAY_BOUNDS_EXCEEDED = NTSTATUS($C000008C); // winnt
  {$EXTERNALSYM STATUS_ARRAY_BOUNDS_EXCEEDED}

//
// MessageId: STATUS_FLOAT_DENORMAL_OPERAND
//
// MessageText:
//
//  {EXCEPTION}
//  Floating-point denormal operand.
//

  STATUS_FLOAT_DENORMAL_OPERAND = NTSTATUS($C000008D); // winnt
  {$EXTERNALSYM STATUS_FLOAT_DENORMAL_OPERAND}

//
// MessageId: STATUS_FLOAT_DIVIDE_BY_ZERO
//
// MessageText:
//
//  {EXCEPTION}
//  Floating-point division by zero.
//

  STATUS_FLOAT_DIVIDE_BY_ZERO = NTSTATUS($C000008E); // winnt
  {$EXTERNALSYM STATUS_FLOAT_DIVIDE_BY_ZERO}

//
// MessageId: STATUS_FLOAT_INEXACT_RESULT
//
// MessageText:
//
//  {EXCEPTION}
//  Floating-point inexact result.
//

  STATUS_FLOAT_INEXACT_RESULT = NTSTATUS($C000008F); // winnt
  {$EXTERNALSYM STATUS_FLOAT_INEXACT_RESULT}

//
// MessageId: STATUS_FLOAT_INVALID_OPERATION
//
// MessageText:
//
//  {EXCEPTION}
//  Floating-point invalid operation.
//

  STATUS_FLOAT_INVALID_OPERATION = NTSTATUS($C0000090); // winnt
  {$EXTERNALSYM STATUS_FLOAT_INVALID_OPERATION}

//
// MessageId: STATUS_FLOAT_OVERFLOW
//
// MessageText:
//
//  {EXCEPTION}
//  Floating-point overflow.
//

  STATUS_FLOAT_OVERFLOW = NTSTATUS($C0000091); // winnt
  {$EXTERNALSYM STATUS_FLOAT_OVERFLOW}

//
// MessageId: STATUS_FLOAT_STACK_CHECK
//
// MessageText:
//
//  {EXCEPTION}
//  Floating-point stack check.
//

  STATUS_FLOAT_STACK_CHECK = NTSTATUS($C0000092); // winnt
  {$EXTERNALSYM STATUS_FLOAT_STACK_CHECK}

//
// MessageId: STATUS_FLOAT_UNDERFLOW
//
// MessageText:
//
//  {EXCEPTION}
//  Floating-point underflow.
//

  STATUS_FLOAT_UNDERFLOW = NTSTATUS($C0000093); // winnt
  {$EXTERNALSYM STATUS_FLOAT_UNDERFLOW}

//
// MessageId: STATUS_INTEGER_DIVIDE_BY_ZERO
//
// MessageText:
//
//  {EXCEPTION}
//  Integer division by zero.
//

  STATUS_INTEGER_DIVIDE_BY_ZERO = NTSTATUS($C0000094); // winnt
  {$EXTERNALSYM STATUS_INTEGER_DIVIDE_BY_ZERO}

//
// MessageId: STATUS_INTEGER_OVERFLOW
//
// MessageText:
//
//  {EXCEPTION}
//  Integer overflow.
//

  STATUS_INTEGER_OVERFLOW = NTSTATUS($C0000095); // winnt
  {$EXTERNALSYM STATUS_INTEGER_OVERFLOW}

//
// MessageId: STATUS_PRIVILEGED_INSTRUCTION
//
// MessageText:
//
//  {EXCEPTION}
//  Privileged instruction.
//

  STATUS_PRIVILEGED_INSTRUCTION = NTSTATUS($C0000096); // winnt
  {$EXTERNALSYM STATUS_PRIVILEGED_INSTRUCTION}

//
// MessageId: STATUS_TOO_MANY_PAGING_FILES
//
// MessageText:
//
//  An attempt was made to install more paging files than the system supports.
//

  STATUS_TOO_MANY_PAGING_FILES = NTSTATUS($C0000097);
  {$EXTERNALSYM STATUS_TOO_MANY_PAGING_FILES}

//
// MessageId: STATUS_FILE_INVALID
//
// MessageText:
//
//  The volume for a file has been externally altered such that the opened file is no longer valid.
//

  STATUS_FILE_INVALID = NTSTATUS($C0000098);
  {$EXTERNALSYM STATUS_FILE_INVALID}

//
// MessageId: STATUS_ALLOTTED_SPACE_EXCEEDED
//
// MessageText:
//
//  When a block of memory is allotted for future updates, such as the memory
//  allocated to hold discretionary access control and primary group information, successive updates may exceed the amount of memory originally allotted.
//  Since quota may already have been charged to several processes which have handles to the object, it is not reasonable to alter the size of the allocated memory.
//  Instead, a request that requires more memory than has been allotted must fail and the STATUS_ALLOTED_SPACE_EXCEEDED error returned.
//

  STATUS_ALLOTTED_SPACE_EXCEEDED = NTSTATUS($C0000099);
  {$EXTERNALSYM STATUS_ALLOTTED_SPACE_EXCEEDED}

//
// MessageId: STATUS_INSUFFICIENT_RESOURCES
//
// MessageText:
//
//  Insufficient system resources exist to complete the API.
//

  STATUS_INSUFFICIENT_RESOURCES = NTSTATUS($C000009A); // ntsubauth
  {$EXTERNALSYM STATUS_INSUFFICIENT_RESOURCES}

//
// MessageId: STATUS_DFS_EXIT_PATH_FOUND
//
// MessageText:
//
//  An attempt has been made to open a DFS exit path control file.
//

  STATUS_DFS_EXIT_PATH_FOUND = NTSTATUS($C000009B);
  {$EXTERNALSYM STATUS_DFS_EXIT_PATH_FOUND}

//
// MessageId: STATUS_DEVICE_DATA_ERROR
//
// MessageText:
//
//  STATUS_DEVICE_DATA_ERROR
//

  STATUS_DEVICE_DATA_ERROR = NTSTATUS($C000009C);
  {$EXTERNALSYM STATUS_DEVICE_DATA_ERROR}

//
// MessageId: STATUS_DEVICE_NOT_CONNECTED
//
// MessageText:
//
//  STATUS_DEVICE_NOT_CONNECTED
//

  STATUS_DEVICE_NOT_CONNECTED = NTSTATUS($C000009D);
  {$EXTERNALSYM STATUS_DEVICE_NOT_CONNECTED}

//
// MessageId: STATUS_DEVICE_POWER_FAILURE
//
// MessageText:
//
//  STATUS_DEVICE_POWER_FAILURE
//

  STATUS_DEVICE_POWER_FAILURE = NTSTATUS($C000009E);
  {$EXTERNALSYM STATUS_DEVICE_POWER_FAILURE}

//
// MessageId: STATUS_FREE_VM_NOT_AT_BASE
//
// MessageText:
//
//  Virtual memory cannot be freed as base address is not the base of the region and a region size of zero was specified.
//

  STATUS_FREE_VM_NOT_AT_BASE = NTSTATUS($C000009F);
  {$EXTERNALSYM STATUS_FREE_VM_NOT_AT_BASE}

//
// MessageId: STATUS_MEMORY_NOT_ALLOCATED
//
// MessageText:
//
//  An attempt was made to free virtual memory which is not allocated.
//

  STATUS_MEMORY_NOT_ALLOCATED = NTSTATUS($C00000A0);
  {$EXTERNALSYM STATUS_MEMORY_NOT_ALLOCATED}

//
// MessageId: STATUS_WORKING_SET_QUOTA
//
// MessageText:
//
//  The working set is not big enough to allow the requested pages to be locked.
//

  STATUS_WORKING_SET_QUOTA = NTSTATUS($C00000A1);
  {$EXTERNALSYM STATUS_WORKING_SET_QUOTA}

//
// MessageId: STATUS_MEDIA_WRITE_PROTECTED
//
// MessageText:
//
//  {Write Protect Error}
//  The disk cannot be written to because it is write protected.
//  Please remove the write protection from the volume %hs in drive %hs.
//

  STATUS_MEDIA_WRITE_PROTECTED = NTSTATUS($C00000A2);
  {$EXTERNALSYM STATUS_MEDIA_WRITE_PROTECTED}

//
// MessageId: STATUS_DEVICE_NOT_READY
//
// MessageText:
//
//  {Drive Not Ready}
//  The drive is not ready for use; its door may be open.
//  Please check drive %hs and make sure that a disk is inserted and that the drive door is closed.
//

  STATUS_DEVICE_NOT_READY = NTSTATUS($C00000A3);
  {$EXTERNALSYM STATUS_DEVICE_NOT_READY}

//
// MessageId: STATUS_INVALID_GROUP_ATTRIBUTES
//
// MessageText:
//
//  The specified attributes are invalid, or incompatible with the attributes for the group as a whole.
//

  STATUS_INVALID_GROUP_ATTRIBUTES = NTSTATUS($C00000A4);
  {$EXTERNALSYM STATUS_INVALID_GROUP_ATTRIBUTES}

//
// MessageId: STATUS_BAD_IMPERSONATION_LEVEL
//
// MessageText:
//
//  A specified impersonation level is invalid.
//  Also used to indicate a required impersonation level was not provided.
//

  STATUS_BAD_IMPERSONATION_LEVEL = NTSTATUS($C00000A5);
  {$EXTERNALSYM STATUS_BAD_IMPERSONATION_LEVEL}

//
// MessageId: STATUS_CANT_OPEN_ANONYMOUS
//
// MessageText:
//
//  An attempt was made to open an Anonymous level token.
//  Anonymous tokens may not be opened.
//

  STATUS_CANT_OPEN_ANONYMOUS = NTSTATUS($C00000A6);
  {$EXTERNALSYM STATUS_CANT_OPEN_ANONYMOUS}

//
// MessageId: STATUS_BAD_VALIDATION_CLASS
//
// MessageText:
//
//  The validation information class requested was invalid.
//

  STATUS_BAD_VALIDATION_CLASS = NTSTATUS($C00000A7);
  {$EXTERNALSYM STATUS_BAD_VALIDATION_CLASS}

//
// MessageId: STATUS_BAD_TOKEN_TYPE
//
// MessageText:
//
//  The type of a token object is inappropriate for its attempted use.
//

  STATUS_BAD_TOKEN_TYPE = NTSTATUS($C00000A8);
  {$EXTERNALSYM STATUS_BAD_TOKEN_TYPE}

//
// MessageId: STATUS_BAD_MASTER_BOOT_RECORD
//
// MessageText:
//
//  The type of a token object is inappropriate for its attempted use.
//

  STATUS_BAD_MASTER_BOOT_RECORD = NTSTATUS($C00000A9);
  {$EXTERNALSYM STATUS_BAD_MASTER_BOOT_RECORD}

//
// MessageId: STATUS_INSTRUCTION_MISALIGNMENT
//
// MessageText:
//
//  An attempt was made to execute an instruction at an unaligned address and the host system does not support unaligned instruction references.
//

  STATUS_INSTRUCTION_MISALIGNMENT = NTSTATUS($C00000AA);
  {$EXTERNALSYM STATUS_INSTRUCTION_MISALIGNMENT}

//
// MessageId: STATUS_INSTANCE_NOT_AVAILABLE
//
// MessageText:
//
//  The maximum named pipe instance count has been reached.
//

  STATUS_INSTANCE_NOT_AVAILABLE = NTSTATUS($C00000AB);
  {$EXTERNALSYM STATUS_INSTANCE_NOT_AVAILABLE}

//
// MessageId: STATUS_PIPE_NOT_AVAILABLE
//
// MessageText:
//
//  An instance of a named pipe cannot be found in the listening state.
//

  STATUS_PIPE_NOT_AVAILABLE = NTSTATUS($C00000AC);
  {$EXTERNALSYM STATUS_PIPE_NOT_AVAILABLE}

//
// MessageId: STATUS_INVALID_PIPE_STATE
//
// MessageText:
//
//  The named pipe is not in the connected or closing state.
//

  STATUS_INVALID_PIPE_STATE = NTSTATUS($C00000AD);
  {$EXTERNALSYM STATUS_INVALID_PIPE_STATE}

//
// MessageId: STATUS_PIPE_BUSY
//
// MessageText:
//
//  The specified pipe is set to complete operations and there are current I/O operations queued so it cannot be changed to queue operations.
//

  STATUS_PIPE_BUSY = NTSTATUS($C00000AE);
  {$EXTERNALSYM STATUS_PIPE_BUSY}

//
// MessageId: STATUS_ILLEGAL_FUNCTION
//
// MessageText:
//
//  The specified handle is not open to the server end of the named pipe.
//

  STATUS_ILLEGAL_FUNCTION = NTSTATUS($C00000AF);
  {$EXTERNALSYM STATUS_ILLEGAL_FUNCTION}

//
// MessageId: STATUS_PIPE_DISCONNECTED
//
// MessageText:
//
//  The specified named pipe is in the disconnected state.
//

  STATUS_PIPE_DISCONNECTED = NTSTATUS($C00000B0);
  {$EXTERNALSYM STATUS_PIPE_DISCONNECTED}

//
// MessageId: STATUS_PIPE_CLOSING
//
// MessageText:
//
//  The specified named pipe is in the closing state.
//

  STATUS_PIPE_CLOSING = NTSTATUS($C00000B1);
  {$EXTERNALSYM STATUS_PIPE_CLOSING}

//
// MessageId: STATUS_PIPE_CONNECTED
//
// MessageText:
//
//  The specified named pipe is in the connected state.
//

  STATUS_PIPE_CONNECTED = NTSTATUS($C00000B2);
  {$EXTERNALSYM STATUS_PIPE_CONNECTED}

//
// MessageId: STATUS_PIPE_LISTENING
//
// MessageText:
//
//  The specified named pipe is in the listening state.
//

  STATUS_PIPE_LISTENING = NTSTATUS($C00000B3);
  {$EXTERNALSYM STATUS_PIPE_LISTENING}

//
// MessageId: STATUS_INVALID_READ_MODE
//
// MessageText:
//
//  The specified named pipe is not in message mode.
//

  STATUS_INVALID_READ_MODE = NTSTATUS($C00000B4);
  {$EXTERNALSYM STATUS_INVALID_READ_MODE}

//
// MessageId: STATUS_IO_TIMEOUT
//
// MessageText:
//
//  {Device Timeout}
//  The specified I/O operation on %hs was not completed before the time-out period expired.
//

  STATUS_IO_TIMEOUT = NTSTATUS($C00000B5);
  {$EXTERNALSYM STATUS_IO_TIMEOUT}

//
// MessageId: STATUS_FILE_FORCED_CLOSED
//
// MessageText:
//
//  The specified file has been closed by another process.
//

  STATUS_FILE_FORCED_CLOSED = NTSTATUS($C00000B6);
  {$EXTERNALSYM STATUS_FILE_FORCED_CLOSED}

//
// MessageId: STATUS_PROFILING_NOT_STARTED
//
// MessageText:
//
//  Profiling not started.
//

  STATUS_PROFILING_NOT_STARTED = NTSTATUS($C00000B7);
  {$EXTERNALSYM STATUS_PROFILING_NOT_STARTED}

//
// MessageId: STATUS_PROFILING_NOT_STOPPED
//
// MessageText:
//
//  Profiling not stopped.
//

  STATUS_PROFILING_NOT_STOPPED = NTSTATUS($C00000B8);
  {$EXTERNALSYM STATUS_PROFILING_NOT_STOPPED}

//
// MessageId: STATUS_COULD_NOT_INTERPRET
//
// MessageText:
//
//  The passed ACL did not contain the minimum required information.
//

  STATUS_COULD_NOT_INTERPRET = NTSTATUS($C00000B9);
  {$EXTERNALSYM STATUS_COULD_NOT_INTERPRET}

//
// MessageId: STATUS_FILE_IS_A_DIRECTORY
//
// MessageText:
//
//  The file that was specified as a target is a directory and the caller specified that it could be anything but a directory.
//

  STATUS_FILE_IS_A_DIRECTORY = NTSTATUS($C00000BA);
  {$EXTERNALSYM STATUS_FILE_IS_A_DIRECTORY}

//
// Network specific errors.
//
//
//
// MessageId: STATUS_NOT_SUPPORTED
//
// MessageText:
//
//  The network request is not supported.
//

  STATUS_NOT_SUPPORTED = NTSTATUS($C00000BB);
  {$EXTERNALSYM STATUS_NOT_SUPPORTED}

//
// MessageId: STATUS_REMOTE_NOT_LISTENING
//
// MessageText:
//
//  This remote computer is not listening.
//

  STATUS_REMOTE_NOT_LISTENING = NTSTATUS($C00000BC);
  {$EXTERNALSYM STATUS_REMOTE_NOT_LISTENING}

//
// MessageId: STATUS_DUPLICATE_NAME
//
// MessageText:
//
//  A duplicate name exists on the network.
//

  STATUS_DUPLICATE_NAME = NTSTATUS($C00000BD);
  {$EXTERNALSYM STATUS_DUPLICATE_NAME}

//
// MessageId: STATUS_BAD_NETWORK_PATH
//
// MessageText:
//
//  The network path cannot be located.
//

  STATUS_BAD_NETWORK_PATH = NTSTATUS($C00000BE);
  {$EXTERNALSYM STATUS_BAD_NETWORK_PATH}

//
// MessageId: STATUS_NETWORK_BUSY
//
// MessageText:
//
//  The network is busy.
//

  STATUS_NETWORK_BUSY = NTSTATUS($C00000BF);
  {$EXTERNALSYM STATUS_NETWORK_BUSY}

//
// MessageId: STATUS_DEVICE_DOES_NOT_EXIST
//
// MessageText:
//
//  This device does not exist.
//

  STATUS_DEVICE_DOES_NOT_EXIST = NTSTATUS($C00000C0);
  {$EXTERNALSYM STATUS_DEVICE_DOES_NOT_EXIST}

//
// MessageId: STATUS_TOO_MANY_COMMANDS
//
// MessageText:
//
//  The network BIOS command limit has been reached.
//

  STATUS_TOO_MANY_COMMANDS = NTSTATUS($C00000C1);
  {$EXTERNALSYM STATUS_TOO_MANY_COMMANDS}

//
// MessageId: STATUS_ADAPTER_HARDWARE_ERROR
//
// MessageText:
//
//  An I/O adapter hardware error has occurred.
//

  STATUS_ADAPTER_HARDWARE_ERROR = NTSTATUS($C00000C2);
  {$EXTERNALSYM STATUS_ADAPTER_HARDWARE_ERROR}

//
// MessageId: STATUS_INVALID_NETWORK_RESPONSE
//
// MessageText:
//
//  The network responded incorrectly.
//

  STATUS_INVALID_NETWORK_RESPONSE = NTSTATUS($C00000C3);
  {$EXTERNALSYM STATUS_INVALID_NETWORK_RESPONSE}

//
// MessageId: STATUS_UNEXPECTED_NETWORK_ERROR
//
// MessageText:
//
//  An unexpected network error occurred.
//

  STATUS_UNEXPECTED_NETWORK_ERROR = NTSTATUS($C00000C4);
  {$EXTERNALSYM STATUS_UNEXPECTED_NETWORK_ERROR}

//
// MessageId: STATUS_BAD_REMOTE_ADAPTER
//
// MessageText:
//
//  The remote adapter is not compatible.
//

  STATUS_BAD_REMOTE_ADAPTER = NTSTATUS($C00000C5);
  {$EXTERNALSYM STATUS_BAD_REMOTE_ADAPTER}

//
// MessageId: STATUS_PRINT_QUEUE_FULL
//
// MessageText:
//
//  The printer queue is full.
//

  STATUS_PRINT_QUEUE_FULL = NTSTATUS($C00000C6);
  {$EXTERNALSYM STATUS_PRINT_QUEUE_FULL}

//
// MessageId: STATUS_NO_SPOOL_SPACE
//
// MessageText:
//
//  Space to store the file waiting to be printed is not available on the server.
//

  STATUS_NO_SPOOL_SPACE = NTSTATUS($C00000C7);
  {$EXTERNALSYM STATUS_NO_SPOOL_SPACE}

//
// MessageId: STATUS_PRINT_CANCELLED
//
// MessageText:
//
//  The requested print file has been canceled.
//

  STATUS_PRINT_CANCELLED = NTSTATUS($C00000C8);
  {$EXTERNALSYM STATUS_PRINT_CANCELLED}

//
// MessageId: STATUS_NETWORK_NAME_DELETED
//
// MessageText:
//
//  The network name was deleted.
//

  STATUS_NETWORK_NAME_DELETED = NTSTATUS($C00000C9);
  {$EXTERNALSYM STATUS_NETWORK_NAME_DELETED}

//
// MessageId: STATUS_NETWORK_ACCESS_DENIED
//
// MessageText:
//
//  Network access is denied.
//

  STATUS_NETWORK_ACCESS_DENIED = NTSTATUS($C00000CA);
  {$EXTERNALSYM STATUS_NETWORK_ACCESS_DENIED}

//
// MessageId: STATUS_BAD_DEVICE_TYPE
//
// MessageText:
//
//  {Incorrect Network Resource Type}
//  The specified device type (LPT, for example) conflicts with the actual device type on the remote resource.
//

  STATUS_BAD_DEVICE_TYPE = NTSTATUS($C00000CB);
  {$EXTERNALSYM STATUS_BAD_DEVICE_TYPE}

//
// MessageId: STATUS_BAD_NETWORK_NAME
//
// MessageText:
//
//  {Network Name Not Found}
//  The specified share name cannot be found on the remote server.
//

  STATUS_BAD_NETWORK_NAME = NTSTATUS($C00000CC);
  {$EXTERNALSYM STATUS_BAD_NETWORK_NAME}

//
// MessageId: STATUS_TOO_MANY_NAMES
//
// MessageText:
//
//  The name limit for the local computer network adapter card was exceeded.
//

  STATUS_TOO_MANY_NAMES = NTSTATUS($C00000CD);
  {$EXTERNALSYM STATUS_TOO_MANY_NAMES}

//
// MessageId: STATUS_TOO_MANY_SESSIONS
//
// MessageText:
//
//  The network BIOS session limit was exceeded.
//

  STATUS_TOO_MANY_SESSIONS = NTSTATUS($C00000CE);
  {$EXTERNALSYM STATUS_TOO_MANY_SESSIONS}

//
// MessageId: STATUS_SHARING_PAUSED
//
// MessageText:
//
//  File sharing has been temporarily paused.
//

  STATUS_SHARING_PAUSED = NTSTATUS($C00000CF);
  {$EXTERNALSYM STATUS_SHARING_PAUSED}

//
// MessageId: STATUS_REQUEST_NOT_ACCEPTED
//
// MessageText:
//
//  No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept.
//

  STATUS_REQUEST_NOT_ACCEPTED = NTSTATUS($C00000D0);
  {$EXTERNALSYM STATUS_REQUEST_NOT_ACCEPTED}

//
// MessageId: STATUS_REDIRECTOR_PAUSED
//
// MessageText:
//
//  Print or disk redirection is temporarily paused.
//

  STATUS_REDIRECTOR_PAUSED = NTSTATUS($C00000D1);
  {$EXTERNALSYM STATUS_REDIRECTOR_PAUSED}

//
// MessageId: STATUS_NET_WRITE_FAULT
//
// MessageText:
//
//  A network data fault occurred.
//

  STATUS_NET_WRITE_FAULT = NTSTATUS($C00000D2);
  {$EXTERNALSYM STATUS_NET_WRITE_FAULT}

//
// MessageId: STATUS_PROFILING_AT_LIMIT
//
// MessageText:
//
//  The number of active profiling objects is at the maximum and no more may be started.
//

  STATUS_PROFILING_AT_LIMIT = NTSTATUS($C00000D3);
  {$EXTERNALSYM STATUS_PROFILING_AT_LIMIT}

//
// MessageId: STATUS_NOT_SAME_DEVICE
//
// MessageText:
//
//  {Incorrect Volume}
//  The target file of a rename request is located on a different device than the source of the rename request.
//

  STATUS_NOT_SAME_DEVICE = NTSTATUS($C00000D4);
  {$EXTERNALSYM STATUS_NOT_SAME_DEVICE}

//
// MessageId: STATUS_FILE_RENAMED
//
// MessageText:
//
//  The file specified has been renamed and thus cannot be modified.
//

  STATUS_FILE_RENAMED = NTSTATUS($C00000D5);
  {$EXTERNALSYM STATUS_FILE_RENAMED}

//
// MessageId: STATUS_VIRTUAL_CIRCUIT_CLOSED
//
// MessageText:
//
//  {Network Request Timeout}
//  The session with a remote server has been disconnected because the time-out interval for a request has expired.
//

  STATUS_VIRTUAL_CIRCUIT_CLOSED = NTSTATUS($C00000D6);
  {$EXTERNALSYM STATUS_VIRTUAL_CIRCUIT_CLOSED}

//
// MessageId: STATUS_NO_SECURITY_ON_OBJECT
//
// MessageText:
//
//  Indicates an attempt was made to operate on the security of an object that does not have security associated with it.
//

  STATUS_NO_SECURITY_ON_OBJECT = NTSTATUS($C00000D7);
  {$EXTERNALSYM STATUS_NO_SECURITY_ON_OBJECT}

//
// MessageId: STATUS_CANT_WAIT
//
// MessageText:
//
//  Used to indicate that an operation cannot continue without blocking for I/O.
//

  STATUS_CANT_WAIT = NTSTATUS($C00000D8);
  {$EXTERNALSYM STATUS_CANT_WAIT}

//
// MessageId: STATUS_PIPE_EMPTY
//
// MessageText:
//
//  Used to indicate that a read operation was done on an empty pipe.
//

  STATUS_PIPE_EMPTY = NTSTATUS($C00000D9);
  {$EXTERNALSYM STATUS_PIPE_EMPTY}

//
// MessageId: STATUS_CANT_ACCESS_DOMAIN_INFO
//
// MessageText:
//
//  Configuration information could not be read from the domain controller, either because the machine is unavailable, or access has been denied.
//

  STATUS_CANT_ACCESS_DOMAIN_INFO = NTSTATUS($C00000DA);
  {$EXTERNALSYM STATUS_CANT_ACCESS_DOMAIN_INFO}

//
// MessageId: STATUS_CANT_TERMINATE_SELF
//
// MessageText:
//
//  Indicates that a thread attempted to terminate itself by default (called NtTerminateThread with NULL) and it was the last thread in the current process.
//

  STATUS_CANT_TERMINATE_SELF = NTSTATUS($C00000DB);
  {$EXTERNALSYM STATUS_CANT_TERMINATE_SELF}

//
// MessageId: STATUS_INVALID_SERVER_STATE
//
// MessageText:
//
//  Indicates the Sam Server was in the wrong state to perform the desired operation.
//

  STATUS_INVALID_SERVER_STATE = NTSTATUS($C00000DC);
  {$EXTERNALSYM STATUS_INVALID_SERVER_STATE}

//
// MessageId: STATUS_INVALID_DOMAIN_STATE
//
// MessageText:
//
//  Indicates the Domain was in the wrong state to perform the desired operation.
//

  STATUS_INVALID_DOMAIN_STATE = NTSTATUS($C00000DD);
  {$EXTERNALSYM STATUS_INVALID_DOMAIN_STATE}

//
// MessageId: STATUS_INVALID_DOMAIN_ROLE
//
// MessageText:
//
//  This operation is only allowed for the Primary Domain Controller of the domain.
//

  STATUS_INVALID_DOMAIN_ROLE = NTSTATUS($C00000DE);
  {$EXTERNALSYM STATUS_INVALID_DOMAIN_ROLE}

//
// MessageId: STATUS_NO_SUCH_DOMAIN
//
// MessageText:
//
//  The specified Domain did not exist.
//

  STATUS_NO_SUCH_DOMAIN = NTSTATUS($C00000DF);
  {$EXTERNALSYM STATUS_NO_SUCH_DOMAIN}

//
// MessageId: STATUS_DOMAIN_EXISTS
//
// MessageText:
//
//  The specified Domain already exists.
//

  STATUS_DOMAIN_EXISTS = NTSTATUS($C00000E0);
  {$EXTERNALSYM STATUS_DOMAIN_EXISTS}

//
// MessageId: STATUS_DOMAIN_LIMIT_EXCEEDED
//
// MessageText:
//
//  An attempt was made to exceed the limit on the number of domains per server for this release.
//

  STATUS_DOMAIN_LIMIT_EXCEEDED = NTSTATUS($C00000E1);
  {$EXTERNALSYM STATUS_DOMAIN_LIMIT_EXCEEDED}

//
// MessageId: STATUS_OPLOCK_NOT_GRANTED
//
// MessageText:
//
//  Error status returned when oplock request is denied.
//

  STATUS_OPLOCK_NOT_GRANTED = NTSTATUS($C00000E2);
  {$EXTERNALSYM STATUS_OPLOCK_NOT_GRANTED}

//
// MessageId: STATUS_INVALID_OPLOCK_PROTOCOL
//
// MessageText:
//
//  Error status returned when an invalid oplock acknowledgment is received by a file system.
//

  STATUS_INVALID_OPLOCK_PROTOCOL = NTSTATUS($C00000E3);
  {$EXTERNALSYM STATUS_INVALID_OPLOCK_PROTOCOL}

//
// MessageId: STATUS_INTERNAL_DB_CORRUPTION
//
// MessageText:
//
//  This error indicates that the requested operation cannot be completed due to a catastrophic media failure or on-disk data structure corruption.
//

  STATUS_INTERNAL_DB_CORRUPTION = NTSTATUS($C00000E4);
  {$EXTERNALSYM STATUS_INTERNAL_DB_CORRUPTION}

//
// MessageId: STATUS_INTERNAL_ERROR
//
// MessageText:
//
//  An internal error occurred.
//

  STATUS_INTERNAL_ERROR = NTSTATUS($C00000E5);
  {$EXTERNALSYM STATUS_INTERNAL_ERROR}

//
// MessageId: STATUS_GENERIC_NOT_MAPPED
//
// MessageText:
//
//  Indicates generic access types were contained in an access mask which should already be mapped to non-generic access types.
//

  STATUS_GENERIC_NOT_MAPPED = NTSTATUS($C00000E6);
  {$EXTERNALSYM STATUS_GENERIC_NOT_MAPPED}

//
// MessageId: STATUS_BAD_DESCRIPTOR_FORMAT
//
// MessageText:
//
//  Indicates a security descriptor is not in the necessary format (absolute or self-relative).
//

  STATUS_BAD_DESCRIPTOR_FORMAT = NTSTATUS($C00000E7);
  {$EXTERNALSYM STATUS_BAD_DESCRIPTOR_FORMAT}

//
// Status codes raised by the Cache Manager which must be considered as
// "expected" by its callers.
//
//
// MessageId: STATUS_INVALID_USER_BUFFER
//
// MessageText:
//
//  An access to a user buffer failed at an "expected" point in time.
//  This code is defined since the caller does not want to accept STATUS_ACCESS_VIOLATION in its filter.
//

  STATUS_INVALID_USER_BUFFER = NTSTATUS($C00000E8);
  {$EXTERNALSYM STATUS_INVALID_USER_BUFFER}

//
// MessageId: STATUS_UNEXPECTED_IO_ERROR
//
// MessageText:
//
//  If an I/O error is returned which is not defined in the standard FsRtl filter, it is converted to the following error which is guaranteed to be in the filter.
//  In this case information is lost, however, the filter correctly handles the exception.
//

  STATUS_UNEXPECTED_IO_ERROR = NTSTATUS($C00000E9);
  {$EXTERNALSYM STATUS_UNEXPECTED_IO_ERROR}

//
// MessageId: STATUS_UNEXPECTED_MM_CREATE_ERR
//
// MessageText:
//
//  If an MM error is returned which is not defined in the standard FsRtl filter, it is converted to one of the following errors which is guaranteed to be in the filter.
//  In this case information is lost, however, the filter correctly handles the exception.
//

  STATUS_UNEXPECTED_MM_CREATE_ERR = NTSTATUS($C00000EA);
  {$EXTERNALSYM STATUS_UNEXPECTED_MM_CREATE_ERR}

//
// MessageId: STATUS_UNEXPECTED_MM_MAP_ERROR
//
// MessageText:
//
//  If an MM error is returned which is not defined in the standard FsRtl filter, it is converted to one of the following errors which is guaranteed to be in the filter.
//  In this case information is lost, however, the filter correctly handles the exception.
//

  STATUS_UNEXPECTED_MM_MAP_ERROR = NTSTATUS($C00000EB);
  {$EXTERNALSYM STATUS_UNEXPECTED_MM_MAP_ERROR}

//
// MessageId: STATUS_UNEXPECTED_MM_EXTEND_ERR
//
// MessageText:
//
//  If an MM error is returned which is not defined in the standard FsRtl filter, it is converted to one of the following errors which is guaranteed to be in the filter.
//  In this case information is lost, however, the filter correctly handles the exception.
//

  STATUS_UNEXPECTED_MM_EXTEND_ERR = NTSTATUS($C00000EC);
  {$EXTERNALSYM STATUS_UNEXPECTED_MM_EXTEND_ERR}

//
// MessageId: STATUS_NOT_LOGON_PROCESS
//
// MessageText:
//
//  The requested action is restricted for use by logon processes only. The calling process has not registered as a logon process.
//

  STATUS_NOT_LOGON_PROCESS = NTSTATUS($C00000ED);
  {$EXTERNALSYM STATUS_NOT_LOGON_PROCESS}

//
// MessageId: STATUS_LOGON_SESSION_EXISTS
//
// MessageText:
//
//  An attempt has been made to start a new session manager or LSA logon session with an ID that is already in use.
//

  STATUS_LOGON_SESSION_EXISTS = NTSTATUS($C00000EE);
  {$EXTERNALSYM STATUS_LOGON_SESSION_EXISTS}

//
// MessageId: STATUS_INVALID_PARAMETER_1
//
// MessageText:
//
//  An invalid parameter was passed to a service or function as the first argument.
//

  STATUS_INVALID_PARAMETER_1 = NTSTATUS($C00000EF);
  {$EXTERNALSYM STATUS_INVALID_PARAMETER_1}

//
// MessageId: STATUS_INVALID_PARAMETER_2
//
// MessageText:
//
//  An invalid parameter was passed to a service or function as the second argument.
//

  STATUS_INVALID_PARAMETER_2 = NTSTATUS($C00000F0);
  {$EXTERNALSYM STATUS_INVALID_PARAMETER_2}

//
// MessageId: STATUS_INVALID_PARAMETER_3
//
// MessageText:
//
//  An invalid parameter was passed to a service or function as the third argument.
//

  STATUS_INVALID_PARAMETER_3 = NTSTATUS($C00000F1);
  {$EXTERNALSYM STATUS_INVALID_PARAMETER_3}

//
// MessageId: STATUS_INVALID_PARAMETER_4
//
// MessageText:
//
//  An invalid parameter was passed to a service or function as the fourth argument.
//

  STATUS_INVALID_PARAMETER_4 = NTSTATUS($C00000F2);
  {$EXTERNALSYM STATUS_INVALID_PARAMETER_4}

//
// MessageId: STATUS_INVALID_PARAMETER_5
//
// MessageText:
//
//  An invalid parameter was passed to a service or function as the fifth argument.
//

  STATUS_INVALID_PARAMETER_5 = NTSTATUS($C00000F3);
  {$EXTERNALSYM STATUS_INVALID_PARAMETER_5}

//
// MessageId: STATUS_INVALID_PARAMETER_6
//
// MessageText:
//
//  An invalid parameter was passed to a service or function as the sixth argument.
//

  STATUS_INVALID_PARAMETER_6 = NTSTATUS($C00000F4);
  {$EXTERNALSYM STATUS_INVALID_PARAMETER_6}

//
// MessageId: STATUS_INVALID_PARAMETER_7
//
// MessageText:
//
//  An invalid parameter was passed to a service or function as the seventh argument.
//

  STATUS_INVALID_PARAMETER_7 = NTSTATUS($C00000F5);
  {$EXTERNALSYM STATUS_INVALID_PARAMETER_7}

//
// MessageId: STATUS_INVALID_PARAMETER_8
//
// MessageText:
//
//  An invalid parameter was passed to a service or function as the eighth argument.
//

  STATUS_INVALID_PARAMETER_8 = NTSTATUS($C00000F6);
  {$EXTERNALSYM STATUS_INVALID_PARAMETER_8}

//
// MessageId: STATUS_INVALID_PARAMETER_9
//
// MessageText:
//
//  An invalid parameter was passed to a service or function as the ninth argument.
//

  STATUS_INVALID_PARAMETER_9 = NTSTATUS($C00000F7);
  {$EXTERNALSYM STATUS_INVALID_PARAMETER_9}

//
// MessageId: STATUS_INVALID_PARAMETER_10
//
// MessageText:
//
//  An invalid parameter was passed to a service or function as the tenth argument.
//

  STATUS_INVALID_PARAMETER_10 = NTSTATUS($C00000F8);
  {$EXTERNALSYM STATUS_INVALID_PARAMETER_10}

//
// MessageId: STATUS_INVALID_PARAMETER_11
//
// MessageText:
//
//  An invalid parameter was passed to a service or function as the eleventh argument.
//

  STATUS_INVALID_PARAMETER_11 = NTSTATUS($C00000F9);
  {$EXTERNALSYM STATUS_INVALID_PARAMETER_11}

//
// MessageId: STATUS_INVALID_PARAMETER_12
//
// MessageText:
//
//  An invalid parameter was passed to a service or function as the twelfth argument.
//

  STATUS_INVALID_PARAMETER_12 = NTSTATUS($C00000FA);
  {$EXTERNALSYM STATUS_INVALID_PARAMETER_12}

//
// MessageId: STATUS_REDIRECTOR_NOT_STARTED
//
// MessageText:
//
//  An attempt was made to access a network file, but the network software was not yet started.
//

  STATUS_REDIRECTOR_NOT_STARTED = NTSTATUS($C00000FB);
  {$EXTERNALSYM STATUS_REDIRECTOR_NOT_STARTED}

//
// MessageId: STATUS_REDIRECTOR_STARTED
//
// MessageText:
//
//  An attempt was made to start the redirector, but the redirector has already been started.
//

  STATUS_REDIRECTOR_STARTED = NTSTATUS($C00000FC);
  {$EXTERNALSYM STATUS_REDIRECTOR_STARTED}

//
// MessageId: STATUS_STACK_OVERFLOW
//
// MessageText:
//
//  A new guard page for the stack cannot be created.
//

  STATUS_STACK_OVERFLOW = NTSTATUS($C00000FD); // winnt
  {$EXTERNALSYM STATUS_STACK_OVERFLOW}

//
// MessageId: STATUS_NO_SUCH_PACKAGE
//
// MessageText:
//
//  A specified authentication package is unknown.
//

  STATUS_NO_SUCH_PACKAGE = NTSTATUS($C00000FE);
  {$EXTERNALSYM STATUS_NO_SUCH_PACKAGE}

//
// MessageId: STATUS_BAD_FUNCTION_TABLE
//
// MessageText:
//
//  A malformed function table was encountered during an unwind operation.
//

  STATUS_BAD_FUNCTION_TABLE = NTSTATUS($C00000FF);
  {$EXTERNALSYM STATUS_BAD_FUNCTION_TABLE}

//
// MessageId: STATUS_VARIABLE_NOT_FOUND
//
// MessageText:
//
//  Indicates the specified environment variable name was not found in the specified environment block.
//

  STATUS_VARIABLE_NOT_FOUND = NTSTATUS($C0000100);
  {$EXTERNALSYM STATUS_VARIABLE_NOT_FOUND}

//
// MessageId: STATUS_DIRECTORY_NOT_EMPTY
//
// MessageText:
//
//  Indicates that the directory trying to be deleted is not empty.
//

  STATUS_DIRECTORY_NOT_EMPTY = NTSTATUS($C0000101);
  {$EXTERNALSYM STATUS_DIRECTORY_NOT_EMPTY}

//
// MessageId: STATUS_FILE_CORRUPT_ERROR
//
// MessageText:
//
//  {Corrupt File}
//  The file or directory %hs is corrupt and unreadable.
//  Please run the Chkdsk utility.
//

  STATUS_FILE_CORRUPT_ERROR = NTSTATUS($C0000102);
  {$EXTERNALSYM STATUS_FILE_CORRUPT_ERROR}

//
// MessageId: STATUS_NOT_A_DIRECTORY
//
// MessageText:
//
//  A requested opened file is not a directory.
//

  STATUS_NOT_A_DIRECTORY = NTSTATUS($C0000103);
  {$EXTERNALSYM STATUS_NOT_A_DIRECTORY}

//
// MessageId: STATUS_BAD_LOGON_SESSION_STATE
//
// MessageText:
//
//  The logon session is not in a state that is consistent with the requested operation.
//

  STATUS_BAD_LOGON_SESSION_STATE = NTSTATUS($C0000104);
  {$EXTERNALSYM STATUS_BAD_LOGON_SESSION_STATE}

//
// MessageId: STATUS_LOGON_SESSION_COLLISION
//
// MessageText:
//
//  An internal LSA error has occurred. An authentication package has requested the creation of a Logon Session but the ID of an already existing Logon Session has been specified.
//

  STATUS_LOGON_SESSION_COLLISION = NTSTATUS($C0000105);
  {$EXTERNALSYM STATUS_LOGON_SESSION_COLLISION}

//
// MessageId: STATUS_NAME_TOO_LONG
//
// MessageText:
//
//  A specified name string is too long for its intended use.
//

  STATUS_NAME_TOO_LONG = NTSTATUS($C0000106);
  {$EXTERNALSYM STATUS_NAME_TOO_LONG}

//
// MessageId: STATUS_FILES_OPEN
//
// MessageText:
//
//  The user attempted to force close the files on a redirected drive, but there were opened files on the drive, and the user did not specify a sufficient level of force.
//

  STATUS_FILES_OPEN = NTSTATUS($C0000107);
  {$EXTERNALSYM STATUS_FILES_OPEN}

//
// MessageId: STATUS_CONNECTION_IN_USE
//
// MessageText:
//
//  The user attempted to force close the files on a redirected drive, but there were opened directories on the drive, and the user did not specify a sufficient level of force.
//

  STATUS_CONNECTION_IN_USE = NTSTATUS($C0000108);
  {$EXTERNALSYM STATUS_CONNECTION_IN_USE}

//
// MessageId: STATUS_MESSAGE_NOT_FOUND
//
// MessageText:
//
//  RtlFindMessage could not locate the requested message ID in the message table resource.
//

  STATUS_MESSAGE_NOT_FOUND = NTSTATUS($C0000109);
  {$EXTERNALSYM STATUS_MESSAGE_NOT_FOUND}

//
// MessageId: STATUS_PROCESS_IS_TERMINATING
//
// MessageText:
//
//  An attempt was made to duplicate an object handle into or out of an exiting process.
//

  STATUS_PROCESS_IS_TERMINATING = NTSTATUS($C000010A);
  {$EXTERNALSYM STATUS_PROCESS_IS_TERMINATING}

//
// MessageId: STATUS_INVALID_LOGON_TYPE
//
// MessageText:
//
//  Indicates an invalid value has been provided for the LogonType requested.
//

  STATUS_INVALID_LOGON_TYPE = NTSTATUS($C000010B);
  {$EXTERNALSYM STATUS_INVALID_LOGON_TYPE}

//
// MessageId: STATUS_NO_GUID_TRANSLATION
//
// MessageText:
//
//  Indicates that an attempt was made to assign protection to a file system file or directory and one of the SIDs in the security descriptor could not be translated into a GUID that could be stored by the file system.
//  This causes the protection attempt to fail, which may cause a file creation attempt to fail.
//

  STATUS_NO_GUID_TRANSLATION = NTSTATUS($C000010C);
  {$EXTERNALSYM STATUS_NO_GUID_TRANSLATION}

//
// MessageId: STATUS_CANNOT_IMPERSONATE
//
// MessageText:
//
//  Indicates that an attempt has been made to impersonate via a named pipe that has not yet been read from.
//

  STATUS_CANNOT_IMPERSONATE = NTSTATUS($C000010D);
  {$EXTERNALSYM STATUS_CANNOT_IMPERSONATE}

//
// MessageId: STATUS_IMAGE_ALREADY_LOADED
//
// MessageText:
//
//  Indicates that the specified image is already loaded.
//

  STATUS_IMAGE_ALREADY_LOADED = NTSTATUS($C000010E);
  {$EXTERNALSYM STATUS_IMAGE_ALREADY_LOADED}

//
// ============================================================
// NOTE: The following ABIOS error code should be reserved on
//       non ABIOS kernel. Eventually, I will remove the ifdef
//       ABIOS.
// ============================================================
//
//
// MessageId: STATUS_ABIOS_NOT_PRESENT
//
// MessageText:
//
//  STATUS_ABIOS_NOT_PRESENT
//

  STATUS_ABIOS_NOT_PRESENT = NTSTATUS($C000010F);
  {$EXTERNALSYM STATUS_ABIOS_NOT_PRESENT}

//
// MessageId: STATUS_ABIOS_LID_NOT_EXIST
//
// MessageText:
//
//  STATUS_ABIOS_LID_NOT_EXIST
//

  STATUS_ABIOS_LID_NOT_EXIST = NTSTATUS($C0000110);
  {$EXTERNALSYM STATUS_ABIOS_LID_NOT_EXIST}

//
// MessageId: STATUS_ABIOS_LID_ALREADY_OWNED
//
// MessageText:
//
//  STATUS_ABIOS_LID_ALREADY_OWNED
//

  STATUS_ABIOS_LID_ALREADY_OWNED = NTSTATUS($C0000111);
  {$EXTERNALSYM STATUS_ABIOS_LID_ALREADY_OWNED}

//
// MessageId: STATUS_ABIOS_NOT_LID_OWNER
//
// MessageText:
//
//  STATUS_ABIOS_NOT_LID_OWNER
//

  STATUS_ABIOS_NOT_LID_OWNER = NTSTATUS($C0000112);
  {$EXTERNALSYM STATUS_ABIOS_NOT_LID_OWNER}

//
// MessageId: STATUS_ABIOS_INVALID_COMMAND
//
// MessageText:
//
//  STATUS_ABIOS_INVALID_COMMAND
//

  STATUS_ABIOS_INVALID_COMMAND = NTSTATUS($C0000113);
  {$EXTERNALSYM STATUS_ABIOS_INVALID_COMMAND}

//
// MessageId: STATUS_ABIOS_INVALID_LID
//
// MessageText:
//
//  STATUS_ABIOS_INVALID_LID
//

  STATUS_ABIOS_INVALID_LID = NTSTATUS($C0000114);
  {$EXTERNALSYM STATUS_ABIOS_INVALID_LID}

//
// MessageId: STATUS_ABIOS_SELECTOR_NOT_AVAILABLE
//
// MessageText:
//
//  STATUS_ABIOS_SELECTOR_NOT_AVAILABLE
//

  STATUS_ABIOS_SELECTOR_NOT_AVAILABLE = NTSTATUS($C0000115);
  {$EXTERNALSYM STATUS_ABIOS_SELECTOR_NOT_AVAILABLE}

//
// MessageId: STATUS_ABIOS_INVALID_SELECTOR
//
// MessageText:
//
//  STATUS_ABIOS_INVALID_SELECTOR
//

  STATUS_ABIOS_INVALID_SELECTOR = NTSTATUS($C0000116);
  {$EXTERNALSYM STATUS_ABIOS_INVALID_SELECTOR}

//
// MessageId: STATUS_NO_LDT
//
// MessageText:
//
//  Indicates that an attempt was made to change the size of the LDT for a process that has no LDT.
//

  STATUS_NO_LDT = NTSTATUS($C0000117);
  {$EXTERNALSYM STATUS_NO_LDT}

//
// MessageId: STATUS_INVALID_LDT_SIZE
//
// MessageText:
//
//  Indicates that an attempt was made to grow an LDT by setting its size, or that the size was not an even number of selectors.
//

  STATUS_INVALID_LDT_SIZE = NTSTATUS($C0000118);
  {$EXTERNALSYM STATUS_INVALID_LDT_SIZE}

//
// MessageId: STATUS_INVALID_LDT_OFFSET
//
// MessageText:
//
//  Indicates that the starting value for the LDT information was not an integral multiple of the selector size.
//

  STATUS_INVALID_LDT_OFFSET = NTSTATUS($C0000119);
  {$EXTERNALSYM STATUS_INVALID_LDT_OFFSET}

//
// MessageId: STATUS_INVALID_LDT_DESCRIPTOR
//
// MessageText:
//
//  Indicates that the user supplied an invalid descriptor when trying to set up Ldt descriptors.
//

  STATUS_INVALID_LDT_DESCRIPTOR = NTSTATUS($C000011A);
  {$EXTERNALSYM STATUS_INVALID_LDT_DESCRIPTOR}

//
// MessageId: STATUS_INVALID_IMAGE_NE_FORMAT
//
// MessageText:
//
//  The specified image file did not have the correct format. It appears to be NE format.
//

  STATUS_INVALID_IMAGE_NE_FORMAT = NTSTATUS($C000011B);
  {$EXTERNALSYM STATUS_INVALID_IMAGE_NE_FORMAT}

//
// MessageId: STATUS_RXACT_INVALID_STATE
//
// MessageText:
//
//  Indicates that the transaction state of a registry sub-tree is incompatible with the requested operation.
//  For example, a request has been made to start a new transaction with one already in progress,
//  or a request has been made to apply a transaction when one is not currently in progress.
//

  STATUS_RXACT_INVALID_STATE = NTSTATUS($C000011C);
  {$EXTERNALSYM STATUS_RXACT_INVALID_STATE}

//
// MessageId: STATUS_RXACT_COMMIT_FAILURE
//
// MessageText:
//
//  Indicates an error has occurred during a registry transaction commit.
//  The database has been left in an unknown, but probably inconsistent, state.
//  The state of the registry transaction is left as COMMITTING.
//

  STATUS_RXACT_COMMIT_FAILURE = NTSTATUS($C000011D);
  {$EXTERNALSYM STATUS_RXACT_COMMIT_FAILURE}

//
// MessageId: STATUS_MAPPED_FILE_SIZE_ZERO
//
// MessageText:
//
//  An attempt was made to map a file of size zero with the maximum size specified as zero.
//

  STATUS_MAPPED_FILE_SIZE_ZERO = NTSTATUS($C000011E);
  {$EXTERNALSYM STATUS_MAPPED_FILE_SIZE_ZERO}

//
// MessageId: STATUS_TOO_MANY_OPENED_FILES
//
// MessageText:
//
//  Too many files are opened on a remote server.
//  This error should only be returned by the Windows redirector on a remote drive.
//

  STATUS_TOO_MANY_OPENED_FILES = NTSTATUS($C000011F);
  {$EXTERNALSYM STATUS_TOO_MANY_OPENED_FILES}

//
// MessageId: STATUS_CANCELLED
//
// MessageText:
//
//  The I/O request was canceled.
//

  STATUS_CANCELLED = NTSTATUS($C0000120);
  {$EXTERNALSYM STATUS_CANCELLED}

//
// MessageId: STATUS_CANNOT_DELETE
//
// MessageText:
//
//  An attempt has been made to remove a file or directory that cannot be deleted.
//

  STATUS_CANNOT_DELETE = NTSTATUS($C0000121);
  {$EXTERNALSYM STATUS_CANNOT_DELETE}

//
// MessageId: STATUS_INVALID_COMPUTER_NAME
//
// MessageText:
//
//  Indicates a name specified as a remote computer name is syntactically invalid.
//

  STATUS_INVALID_COMPUTER_NAME = NTSTATUS($C0000122);
  {$EXTERNALSYM STATUS_INVALID_COMPUTER_NAME}

//
// MessageId: STATUS_FILE_DELETED
//
// MessageText:
//
//  An I/O request other than close was performed on a file after it has been deleted,
//  which can only happen to a request which did not complete before the last handle was closed via NtClose.
//

  STATUS_FILE_DELETED = NTSTATUS($C0000123);
  {$EXTERNALSYM STATUS_FILE_DELETED}

//
// MessageId: STATUS_SPECIAL_ACCOUNT
//
// MessageText:
//
//  Indicates an operation has been attempted on a built-in (special) SAM account which is incompatible with built-in accounts.
//  For example, built-in accounts cannot be deleted.
//

  STATUS_SPECIAL_ACCOUNT = NTSTATUS($C0000124);
  {$EXTERNALSYM STATUS_SPECIAL_ACCOUNT}

//
// MessageId: STATUS_SPECIAL_GROUP
//
// MessageText:
//
//  The operation requested may not be performed on the specified group because it is a built-in special group.
//

  STATUS_SPECIAL_GROUP = NTSTATUS($C0000125);
  {$EXTERNALSYM STATUS_SPECIAL_GROUP}

//
// MessageId: STATUS_SPECIAL_USER
//
// MessageText:
//
//  The operation requested may not be performed on the specified user because it is a built-in special user.
//

  STATUS_SPECIAL_USER = NTSTATUS($C0000126);
  {$EXTERNALSYM STATUS_SPECIAL_USER}

//
// MessageId: STATUS_MEMBERS_PRIMARY_GROUP
//
// MessageText:
//
//  Indicates a member cannot be removed from a group because the group is currently the member's primary group.
//

  STATUS_MEMBERS_PRIMARY_GROUP = NTSTATUS($C0000127);
  {$EXTERNALSYM STATUS_MEMBERS_PRIMARY_GROUP}

//
// MessageId: STATUS_FILE_CLOSED
//
// MessageText:
//
//  An I/O request other than close and several other special case operations was attempted using a file object that had already been closed.
//

  STATUS_FILE_CLOSED = NTSTATUS($C0000128);
  {$EXTERNALSYM STATUS_FILE_CLOSED}

//
// MessageId: STATUS_TOO_MANY_THREADS
//
// MessageText:
//
//  Indicates a process has too many threads to perform the requested action. For example, assignment of a primary token may only be performed when a process has zero or one threads.
//

  STATUS_TOO_MANY_THREADS = NTSTATUS($C0000129);
  {$EXTERNALSYM STATUS_TOO_MANY_THREADS}

//
// MessageId: STATUS_THREAD_NOT_IN_PROCESS
//
// MessageText:
//
//  An attempt was made to operate on a thread within a specific process, but the thread specified is not in the process specified.
//

  STATUS_THREAD_NOT_IN_PROCESS = NTSTATUS($C000012A);
  {$EXTERNALSYM STATUS_THREAD_NOT_IN_PROCESS}

//
// MessageId: STATUS_TOKEN_ALREADY_IN_USE
//
// MessageText:
//
//  An attempt was made to establish a token for use as a primary token but the token is already in use. A token can only be the primary token of one process at a time.
//

  STATUS_TOKEN_ALREADY_IN_USE = NTSTATUS($C000012B);
  {$EXTERNALSYM STATUS_TOKEN_ALREADY_IN_USE}

//
// MessageId: STATUS_PAGEFILE_QUOTA_EXCEEDED
//
// MessageText:
//
//  Page file quota was exceeded.
//

  STATUS_PAGEFILE_QUOTA_EXCEEDED = NTSTATUS($C000012C);
  {$EXTERNALSYM STATUS_PAGEFILE_QUOTA_EXCEEDED}

//
// MessageId: STATUS_COMMITMENT_LIMIT
//
// MessageText:
//
//  {Out of Virtual Memory}
//  Your system is low on virtual memory. To ensure that Windows runs properly, increase the size of your virtual memory paging file. For more information, see Help.
//

  STATUS_COMMITMENT_LIMIT = NTSTATUS($C000012D);
  {$EXTERNALSYM STATUS_COMMITMENT_LIMIT}

//
// MessageId: STATUS_INVALID_IMAGE_LE_FORMAT
//
// MessageText:
//
//  The specified image file did not have the correct format, it appears to be LE format.
//

  STATUS_INVALID_IMAGE_LE_FORMAT = NTSTATUS($C000012E);
  {$EXTERNALSYM STATUS_INVALID_IMAGE_LE_FORMAT}

//
// MessageId: STATUS_INVALID_IMAGE_NOT_MZ
//
// MessageText:
//
//  The specified image file did not have the correct format, it did not have an initial MZ.
//

  STATUS_INVALID_IMAGE_NOT_MZ = NTSTATUS($C000012F);
  {$EXTERNALSYM STATUS_INVALID_IMAGE_NOT_MZ}

//
// MessageId: STATUS_INVALID_IMAGE_PROTECT
//
// MessageText:
//
//  The specified image file did not have the correct format, it did not have a proper e_lfarlc in the MZ header.
//

  STATUS_INVALID_IMAGE_PROTECT = NTSTATUS($C0000130);
  {$EXTERNALSYM STATUS_INVALID_IMAGE_PROTECT}

//
// MessageId: STATUS_INVALID_IMAGE_WIN_16
//
// MessageText:
//
//  The specified image file did not have the correct format, it appears to be a 16-bit Windows image.
//

  STATUS_INVALID_IMAGE_WIN_16 = NTSTATUS($C0000131);
  {$EXTERNALSYM STATUS_INVALID_IMAGE_WIN_16}

//
// MessageId: STATUS_LOGON_SERVER_CONFLICT
//
// MessageText:
//
//  The Netlogon service cannot start because another Netlogon service running in the domain conflicts with the specified role.
//

  STATUS_LOGON_SERVER_CONFLICT = NTSTATUS($C0000132);
  {$EXTERNALSYM STATUS_LOGON_SERVER_CONFLICT}

//
// MessageId: STATUS_TIME_DIFFERENCE_AT_DC
//
// MessageText:
//
//  The time at the Primary Domain Controller is different than the time at the Backup Domain Controller or member server by too large an amount.
//

  STATUS_TIME_DIFFERENCE_AT_DC = NTSTATUS($C0000133);
  {$EXTERNALSYM STATUS_TIME_DIFFERENCE_AT_DC}

//
// MessageId: STATUS_SYNCHRONIZATION_REQUIRED
//
// MessageText:
//
//  The SAM database on a Windows Server is significantly out of synchronization with the copy on the Domain Controller. A complete synchronization is required.
//

  STATUS_SYNCHRONIZATION_REQUIRED = NTSTATUS($C0000134);
  {$EXTERNALSYM STATUS_SYNCHRONIZATION_REQUIRED}

//
// MessageId: STATUS_DLL_NOT_FOUND
//
// MessageText:
//
//  {Unable To Locate DLL}
//  The dynamic link library %hs could not be found in the specified path %hs.
//

  STATUS_DLL_NOT_FOUND = NTSTATUS($C0000135);
  {$EXTERNALSYM STATUS_DLL_NOT_FOUND}

//
// MessageId: STATUS_OPEN_FAILED
//
// MessageText:
//
//  The NtCreateFile API failed. This error should never be returned to an application, it is a place holder for the Windows Lan Manager Redirector to use in its internal error mapping routines.
//

  STATUS_OPEN_FAILED = NTSTATUS($C0000136);
  {$EXTERNALSYM STATUS_OPEN_FAILED}

//
// MessageId: STATUS_IO_PRIVILEGE_FAILED
//
// MessageText:
//
//  {Privilege Failed}
//  The I/O permissions for the process could not be changed.
//

  STATUS_IO_PRIVILEGE_FAILED = NTSTATUS($C0000137);
  {$EXTERNALSYM STATUS_IO_PRIVILEGE_FAILED}

//
// MessageId: STATUS_ORDINAL_NOT_FOUND
//
// MessageText:
//
//  {Ordinal Not Found}
//  The ordinal %ld could not be located in the dynamic link library %hs.
//

  STATUS_ORDINAL_NOT_FOUND = NTSTATUS($C0000138);
  {$EXTERNALSYM STATUS_ORDINAL_NOT_FOUND}

//
// MessageId: STATUS_ENTRYPOINT_NOT_FOUND
//
// MessageText:
//
//  {Entry Point Not Found}
//  The procedure entry point %hs could not be located in the dynamic link library %hs.
//

  STATUS_ENTRYPOINT_NOT_FOUND = NTSTATUS($C0000139);
  {$EXTERNALSYM STATUS_ENTRYPOINT_NOT_FOUND}

//
// MessageId: STATUS_CONTROL_C_EXIT
//
// MessageText:
//
//  {Application Exit by CTRL+C}
//  The application terminated as a result of a CTRL+C.
//

  STATUS_CONTROL_C_EXIT = NTSTATUS($C000013A); // winnt
  {$EXTERNALSYM STATUS_CONTROL_C_EXIT}

//
// MessageId: STATUS_LOCAL_DISCONNECT
//
// MessageText:
//
//  {Virtual Circuit Closed}
//  The network transport on your computer has closed a network connection. There may or may not be I/O requests outstanding.
//

  STATUS_LOCAL_DISCONNECT = NTSTATUS($C000013B);
  {$EXTERNALSYM STATUS_LOCAL_DISCONNECT}

//
// MessageId: STATUS_REMOTE_DISCONNECT
//
// MessageText:
//
//  {Virtual Circuit Closed}
//  The network transport on a remote computer has closed a network connection. There may or may not be I/O requests outstanding.
//

  STATUS_REMOTE_DISCONNECT = NTSTATUS($C000013C);
  {$EXTERNALSYM STATUS_REMOTE_DISCONNECT}

//
// MessageId: STATUS_REMOTE_RESOURCES
//
// MessageText:
//
//  {Insufficient Resources on Remote Computer}
//  The remote computer has insufficient resources to complete the network request. For instance, there may not be enough memory available on the remote computer to carry out the request at this time.
//

  STATUS_REMOTE_RESOURCES = NTSTATUS($C000013D);
  {$EXTERNALSYM STATUS_REMOTE_RESOURCES}

//
// MessageId: STATUS_LINK_FAILED
//
// MessageText:
//
//  {Virtual Circuit Closed}
//  An existing connection (virtual circuit) has been broken at the remote computer. There is probably something wrong with the network software protocol or the network hardware on the remote computer.
//

  STATUS_LINK_FAILED = NTSTATUS($C000013E);
  {$EXTERNALSYM STATUS_LINK_FAILED}

//
// MessageId: STATUS_LINK_TIMEOUT
//
// MessageText:
//
//  {Virtual Circuit Closed}
//  The network transport on your computer has closed a network connection because it had to wait too long for a response from the remote computer.
//

  STATUS_LINK_TIMEOUT = NTSTATUS($C000013F);
  {$EXTERNALSYM STATUS_LINK_TIMEOUT}

//
// MessageId: STATUS_INVALID_CONNECTION
//
// MessageText:
//
//  The connection handle given to the transport was invalid.
//

  STATUS_INVALID_CONNECTION = NTSTATUS($C0000140);
  {$EXTERNALSYM STATUS_INVALID_CONNECTION}

//
// MessageId: STATUS_INVALID_ADDRESS
//
// MessageText:
//
//  The address handle given to the transport was invalid.
//

  STATUS_INVALID_ADDRESS = NTSTATUS($C0000141);
  {$EXTERNALSYM STATUS_INVALID_ADDRESS}

//
// MessageId: STATUS_DLL_INIT_FAILED
//
// MessageText:
//
//  {DLL Initialization Failed}
//  Initialization of the dynamic link library %hs failed. The process is terminating abnormally.
//

  STATUS_DLL_INIT_FAILED = NTSTATUS($C0000142);
  {$EXTERNALSYM STATUS_DLL_INIT_FAILED}

//
// MessageId: STATUS_MISSING_SYSTEMFILE
//
// MessageText:
//
//  {Missing System File}
//  The required system file %hs is bad or missing.
//

  STATUS_MISSING_SYSTEMFILE = NTSTATUS($C0000143);
  {$EXTERNALSYM STATUS_MISSING_SYSTEMFILE}

//
// MessageId: STATUS_UNHANDLED_EXCEPTION
//
// MessageText:
//
//  {Application Error}
//  The exception %s (0x%08lx) occurred in the application at location 0x%08lx.
//

  STATUS_UNHANDLED_EXCEPTION = NTSTATUS($C0000144);
  {$EXTERNALSYM STATUS_UNHANDLED_EXCEPTION}

//
// MessageId: STATUS_APP_INIT_FAILURE
//
// MessageText:
//
//  {Application Error}
//  The application failed to initialize properly (0x%lx). Click on OK to terminate the application.
//

  STATUS_APP_INIT_FAILURE = NTSTATUS($C0000145);
  {$EXTERNALSYM STATUS_APP_INIT_FAILURE}

//
// MessageId: STATUS_PAGEFILE_CREATE_FAILED
//
// MessageText:
//
//  {Unable to Create Paging File}
//  The creation of the paging file %hs failed (%lx). The requested size was %ld.
//

  STATUS_PAGEFILE_CREATE_FAILED = NTSTATUS($C0000146);
  {$EXTERNALSYM STATUS_PAGEFILE_CREATE_FAILED}

//
// MessageId: STATUS_NO_PAGEFILE
//
// MessageText:
//
//  {No Paging File Specified}
//  No paging file was specified in the system configuration.
//

  STATUS_NO_PAGEFILE = NTSTATUS($C0000147);
  {$EXTERNALSYM STATUS_NO_PAGEFILE}

//
// MessageId: STATUS_INVALID_LEVEL
//
// MessageText:
//
//  {Incorrect System Call Level}
//  An invalid level was passed into the specified system call.
//

  STATUS_INVALID_LEVEL = NTSTATUS($C0000148);
  {$EXTERNALSYM STATUS_INVALID_LEVEL}

//
// MessageId: STATUS_WRONG_PASSWORD_CORE
//
// MessageText:
//
//  {Incorrect Password to LAN Manager Server}
//  You specified an incorrect password to a LAN Manager 2.x or MS-NET server.
//

  STATUS_WRONG_PASSWORD_CORE = NTSTATUS($C0000149);
  {$EXTERNALSYM STATUS_WRONG_PASSWORD_CORE}

//
// MessageId: STATUS_ILLEGAL_FLOAT_CONTEXT
//
// MessageText:
//
//  {EXCEPTION}
//  A real-mode application issued a floating-point instruction and floating-point hardware is not present.
//

  STATUS_ILLEGAL_FLOAT_CONTEXT = NTSTATUS($C000014A);
  {$EXTERNALSYM STATUS_ILLEGAL_FLOAT_CONTEXT}

//
// MessageId: STATUS_PIPE_BROKEN
//
// MessageText:
//
//  The pipe operation has failed because the other end of the pipe has been closed.
//

  STATUS_PIPE_BROKEN = NTSTATUS($C000014B);
  {$EXTERNALSYM STATUS_PIPE_BROKEN}

//
// MessageId: STATUS_REGISTRY_CORRUPT
//
// MessageText:
//
//  {The Registry Is Corrupt}
//  The structure of one of the files that contains Registry data is corrupt, or the image of the file in memory is corrupt, or the file could not be recovered because the alternate copy or log was absent or corrupt.
//

  STATUS_REGISTRY_CORRUPT = NTSTATUS($C000014C);
  {$EXTERNALSYM STATUS_REGISTRY_CORRUPT}

//
// MessageId: STATUS_REGISTRY_IO_FAILED
//
// MessageText:
//
//  An I/O operation initiated by the Registry failed unrecoverably.
//  The Registry could not read in, or write out, or flush, one of the files that contain the system's image of the Registry.
//

  STATUS_REGISTRY_IO_FAILED = NTSTATUS($C000014D);
  {$EXTERNALSYM STATUS_REGISTRY_IO_FAILED}

//
// MessageId: STATUS_NO_EVENT_PAIR
//
// MessageText:
//
//  An event pair synchronization operation was performed using the thread specific client/server event pair object, but no event pair object was associated with the thread.
//

  STATUS_NO_EVENT_PAIR = NTSTATUS($C000014E);
  {$EXTERNALSYM STATUS_NO_EVENT_PAIR}

//
// MessageId: STATUS_UNRECOGNIZED_VOLUME
//
// MessageText:
//
//  The volume does not contain a recognized file system.
//  Please make sure that all required file system drivers are loaded and that the volume is not corrupt.
//

  STATUS_UNRECOGNIZED_VOLUME = NTSTATUS($C000014F);
  {$EXTERNALSYM STATUS_UNRECOGNIZED_VOLUME}

//
// MessageId: STATUS_SERIAL_NO_DEVICE_INITED
//
// MessageText:
//
//  No serial device was successfully initialized. The serial driver will unload.
//

  STATUS_SERIAL_NO_DEVICE_INITED = NTSTATUS($C0000150);
  {$EXTERNALSYM STATUS_SERIAL_NO_DEVICE_INITED}

//
// MessageId: STATUS_NO_SUCH_ALIAS
//
// MessageText:
//
//  The specified local group does not exist.
//

  STATUS_NO_SUCH_ALIAS = NTSTATUS($C0000151);
  {$EXTERNALSYM STATUS_NO_SUCH_ALIAS}

//
// MessageId: STATUS_MEMBER_NOT_IN_ALIAS
//
// MessageText:
//
//  The specified account name is not a member of the local group.
//

  STATUS_MEMBER_NOT_IN_ALIAS = NTSTATUS($C0000152);
  {$EXTERNALSYM STATUS_MEMBER_NOT_IN_ALIAS}

//
// MessageId: STATUS_MEMBER_IN_ALIAS
//
// MessageText:
//
//  The specified account name is already a member of the local group.
//

  STATUS_MEMBER_IN_ALIAS = NTSTATUS($C0000153);
  {$EXTERNALSYM STATUS_MEMBER_IN_ALIAS}

//
// MessageId: STATUS_ALIAS_EXISTS
//
// MessageText:
//
//  The specified local group already exists.
//

  STATUS_ALIAS_EXISTS = NTSTATUS($C0000154);
  {$EXTERNALSYM STATUS_ALIAS_EXISTS}

//
// MessageId: STATUS_LOGON_NOT_GRANTED
//
// MessageText:
//
//  A requested type of logon (e.g., Interactive, Network, Service) is not granted by the target system's local security policy.
//  Please ask the system administrator to grant the necessary form of logon.
//

  STATUS_LOGON_NOT_GRANTED = NTSTATUS($C0000155);
  {$EXTERNALSYM STATUS_LOGON_NOT_GRANTED}

//
// MessageId: STATUS_TOO_MANY_SECRETS
//
// MessageText:
//
//  The maximum number of secrets that may be stored in a single system has been exceeded. The length and number of secrets is limited to satisfy United States State Department export restrictions.
//

  STATUS_TOO_MANY_SECRETS = NTSTATUS($C0000156);
  {$EXTERNALSYM STATUS_TOO_MANY_SECRETS}

//
// MessageId: STATUS_SECRET_TOO_LONG
//
// MessageText:
//
//  The length of a secret exceeds the maximum length allowed. The length and number of secrets is limited to satisfy United States State Department export restrictions.
//

  STATUS_SECRET_TOO_LONG = NTSTATUS($C0000157);
  {$EXTERNALSYM STATUS_SECRET_TOO_LONG}

//
// MessageId: STATUS_INTERNAL_DB_ERROR
//
// MessageText:
//
//  The Local Security Authority (LSA) database contains an internal inconsistency.
//

  STATUS_INTERNAL_DB_ERROR = NTSTATUS($C0000158);
  {$EXTERNALSYM STATUS_INTERNAL_DB_ERROR}

//
// MessageId: STATUS_FULLSCREEN_MODE
//
// MessageText:
//
//  The requested operation cannot be performed in fullscreen mode.
//

  STATUS_FULLSCREEN_MODE = NTSTATUS($C0000159);
  {$EXTERNALSYM STATUS_FULLSCREEN_MODE}

//
// MessageId: STATUS_TOO_MANY_CONTEXT_IDS
//
// MessageText:
//
//  During a logon attempt, the user's security context accumulated too many security IDs. This is a very unusual situation.
//  Remove the user from some global or local groups to reduce the number of security ids to incorporate into the security context.
//

  STATUS_TOO_MANY_CONTEXT_IDS = NTSTATUS($C000015A);
  {$EXTERNALSYM STATUS_TOO_MANY_CONTEXT_IDS}

//
// MessageId: STATUS_LOGON_TYPE_NOT_GRANTED
//
// MessageText:
//
//  A user has requested a type of logon (e.g., interactive or network) that has not been granted. An administrator has control over who may logon interactively and through the network.
//

  STATUS_LOGON_TYPE_NOT_GRANTED = NTSTATUS($C000015B);
  {$EXTERNALSYM STATUS_LOGON_TYPE_NOT_GRANTED}

//
// MessageId: STATUS_NOT_REGISTRY_FILE
//
// MessageText:
//
//  The system has attempted to load or restore a file into the registry, and the specified file is not in the format of a registry file.
//

  STATUS_NOT_REGISTRY_FILE = NTSTATUS($C000015C);
  {$EXTERNALSYM STATUS_NOT_REGISTRY_FILE}

//
// MessageId: STATUS_NT_CROSS_ENCRYPTION_REQUIRED
//
// MessageText:
//
//  An attempt was made to change a user password in the security account manager without providing the necessary Windows cross-encrypted password.
//

  STATUS_NT_CROSS_ENCRYPTION_REQUIRED = NTSTATUS($C000015D);
  {$EXTERNALSYM STATUS_NT_CROSS_ENCRYPTION_REQUIRED}

//
// MessageId: STATUS_DOMAIN_CTRLR_CONFIG_ERROR
//
// MessageText:
//
//  A Windows Server has an incorrect configuration.
//

  STATUS_DOMAIN_CTRLR_CONFIG_ERROR = NTSTATUS($C000015E);
  {$EXTERNALSYM STATUS_DOMAIN_CTRLR_CONFIG_ERROR}

//
// MessageId: STATUS_FT_MISSING_MEMBER
//
// MessageText:
//
//  An attempt was made to explicitly access the secondary copy of information via a device control to the Fault Tolerance driver and the secondary copy is not present in the system.
//

  STATUS_FT_MISSING_MEMBER = NTSTATUS($C000015F);
  {$EXTERNALSYM STATUS_FT_MISSING_MEMBER}

//
// MessageId: STATUS_ILL_FORMED_SERVICE_ENTRY
//
// MessageText:
//
//  A configuration registry node representing a driver service entry was ill-formed and did not contain required value entries.
//

  STATUS_ILL_FORMED_SERVICE_ENTRY = NTSTATUS($C0000160);
  {$EXTERNALSYM STATUS_ILL_FORMED_SERVICE_ENTRY}

//
// MessageId: STATUS_ILLEGAL_CHARACTER
//
// MessageText:
//
//  An illegal character was encountered. For a multi-byte character set this includes a lead byte without a succeeding trail byte. For the Unicode character set this includes the characters 0xFFFF and 0xFFFE.
//

  STATUS_ILLEGAL_CHARACTER = NTSTATUS($C0000161);
  {$EXTERNALSYM STATUS_ILLEGAL_CHARACTER}

//
// MessageId: STATUS_UNMAPPABLE_CHARACTER
//
// MessageText:
//
//  No mapping for the Unicode character exists in the target multi-byte code page.
//

  STATUS_UNMAPPABLE_CHARACTER = NTSTATUS($C0000162);
  {$EXTERNALSYM STATUS_UNMAPPABLE_CHARACTER}

//
// MessageId: STATUS_UNDEFINED_CHARACTER
//
// MessageText:
//
//  The Unicode character is not defined in the Unicode character set installed on the system.
//

  STATUS_UNDEFINED_CHARACTER = NTSTATUS($C0000163);
  {$EXTERNALSYM STATUS_UNDEFINED_CHARACTER}

//
// MessageId: STATUS_FLOPPY_VOLUME
//
// MessageText:
//
//  The paging file cannot be created on a floppy diskette.
//

  STATUS_FLOPPY_VOLUME = NTSTATUS($C0000164);
  {$EXTERNALSYM STATUS_FLOPPY_VOLUME}

//
// MessageId: STATUS_FLOPPY_ID_MARK_NOT_FOUND
//
// MessageText:
//
//  {Floppy Disk Error}
//  While accessing a floppy disk, an ID address mark was not found.
//

  STATUS_FLOPPY_ID_MARK_NOT_FOUND = NTSTATUS($C0000165);
  {$EXTERNALSYM STATUS_FLOPPY_ID_MARK_NOT_FOUND}

//
// MessageId: STATUS_FLOPPY_WRONG_CYLINDER
//
// MessageText:
//
//  {Floppy Disk Error}
//  While accessing a floppy disk, the track address from the sector ID field was found to be different than the track address maintained by the controller.
//

  STATUS_FLOPPY_WRONG_CYLINDER = NTSTATUS($C0000166);
  {$EXTERNALSYM STATUS_FLOPPY_WRONG_CYLINDER}

//
// MessageId: STATUS_FLOPPY_UNKNOWN_ERROR
//
// MessageText:
//
//  {Floppy Disk Error}
//  The floppy disk controller reported an error that is not recognized by the floppy disk driver.
//

  STATUS_FLOPPY_UNKNOWN_ERROR = NTSTATUS($C0000167);
  {$EXTERNALSYM STATUS_FLOPPY_UNKNOWN_ERROR}

//
// MessageId: STATUS_FLOPPY_BAD_REGISTERS
//
// MessageText:
//
//  {Floppy Disk Error}
//  While accessing a floppy-disk, the controller returned inconsistent results via its registers.
//

  STATUS_FLOPPY_BAD_REGISTERS = NTSTATUS($C0000168);
  {$EXTERNALSYM STATUS_FLOPPY_BAD_REGISTERS}

//
// MessageId: STATUS_DISK_RECALIBRATE_FAILED
//
// MessageText:
//
//  {Hard Disk Error}
//  While accessing the hard disk, a recalibrate operation failed, even after retries.
//

  STATUS_DISK_RECALIBRATE_FAILED = NTSTATUS($C0000169);
  {$EXTERNALSYM STATUS_DISK_RECALIBRATE_FAILED}

//
// MessageId: STATUS_DISK_OPERATION_FAILED
//
// MessageText:
//
//  {Hard Disk Error}
//  While accessing the hard disk, a disk operation failed even after retries.
//

  STATUS_DISK_OPERATION_FAILED = NTSTATUS($C000016A);
  {$EXTERNALSYM STATUS_DISK_OPERATION_FAILED}

//
// MessageId: STATUS_DISK_RESET_FAILED
//
// MessageText:
//
//  {Hard Disk Error}
//  While accessing the hard disk, a disk controller reset was needed, but even that failed.
//

  STATUS_DISK_RESET_FAILED = NTSTATUS($C000016B);
  {$EXTERNALSYM STATUS_DISK_RESET_FAILED}

//
// MessageId: STATUS_SHARED_IRQ_BUSY
//
// MessageText:
//
//  An attempt was made to open a device that was sharing an IRQ with other devices.
//  At least one other device that uses that IRQ was already opened.
//  Two concurrent opens of devices that share an IRQ and only work via interrupts is not supported for the particular bus type that the devices use.
//

  STATUS_SHARED_IRQ_BUSY = NTSTATUS($C000016C);
  {$EXTERNALSYM STATUS_SHARED_IRQ_BUSY}

//
// MessageId: STATUS_FT_ORPHANING
//
// MessageText:
//
//  {FT Orphaning}
//  A disk that is part of a fault-tolerant volume can no longer be accessed.
//

  STATUS_FT_ORPHANING = NTSTATUS($C000016D);
  {$EXTERNALSYM STATUS_FT_ORPHANING}

//
// MessageId: STATUS_BIOS_FAILED_TO_CONNECT_INTERRUPT
//
// MessageText:
//
//  The system bios failed to connect a system interrupt to the device or bus for
//  which the device is connected.
//

  STATUS_BIOS_FAILED_TO_CONNECT_INTERRUPT = NTSTATUS($C000016E);
  {$EXTERNALSYM STATUS_BIOS_FAILED_TO_CONNECT_INTERRUPT}

//
// MessageId: STATUS_PARTITION_FAILURE
//
// MessageText:
//
//  Tape could not be partitioned.
//

  STATUS_PARTITION_FAILURE = NTSTATUS($C0000172);
  {$EXTERNALSYM STATUS_PARTITION_FAILURE}

//
// MessageId: STATUS_INVALID_BLOCK_LENGTH
//
// MessageText:
//
//  When accessing a new tape of a multivolume partition, the current blocksize is incorrect.
//

  STATUS_INVALID_BLOCK_LENGTH = NTSTATUS($C0000173);
  {$EXTERNALSYM STATUS_INVALID_BLOCK_LENGTH}

//
// MessageId: STATUS_DEVICE_NOT_PARTITIONED
//
// MessageText:
//
//  Tape partition information could not be found when loading a tape.
//

  STATUS_DEVICE_NOT_PARTITIONED = NTSTATUS($C0000174);
  {$EXTERNALSYM STATUS_DEVICE_NOT_PARTITIONED}

//
// MessageId: STATUS_UNABLE_TO_LOCK_MEDIA
//
// MessageText:
//
//  Attempt to lock the eject media mechanism fails.
//

  STATUS_UNABLE_TO_LOCK_MEDIA = NTSTATUS($C0000175);
  {$EXTERNALSYM STATUS_UNABLE_TO_LOCK_MEDIA}

//
// MessageId: STATUS_UNABLE_TO_UNLOAD_MEDIA
//
// MessageText:
//
//  Unload media fails.
//

  STATUS_UNABLE_TO_UNLOAD_MEDIA = NTSTATUS($C0000176);
  {$EXTERNALSYM STATUS_UNABLE_TO_UNLOAD_MEDIA}

//
// MessageId: STATUS_EOM_OVERFLOW
//
// MessageText:
//
//  Physical end of tape was detected.
//

  STATUS_EOM_OVERFLOW = NTSTATUS($C0000177);
  {$EXTERNALSYM STATUS_EOM_OVERFLOW}

//
// MessageId: STATUS_NO_MEDIA
//
// MessageText:
//
//  {No Media}
//  There is no media in the drive.
//  Please insert media into drive %hs.
//

  STATUS_NO_MEDIA = NTSTATUS($C0000178);
  {$EXTERNALSYM STATUS_NO_MEDIA}

//
// MessageId: STATUS_NO_SUCH_MEMBER
//
// MessageText:
//
//  A member could not be added to or removed from the local group because the member does not exist.
//

  STATUS_NO_SUCH_MEMBER = NTSTATUS($C000017A);
  {$EXTERNALSYM STATUS_NO_SUCH_MEMBER}

//
// MessageId: STATUS_INVALID_MEMBER
//
// MessageText:
//
//  A new member could not be added to a local group because the member has the wrong account type.
//

  STATUS_INVALID_MEMBER = NTSTATUS($C000017B);
  {$EXTERNALSYM STATUS_INVALID_MEMBER}

//
// MessageId: STATUS_KEY_DELETED
//
// MessageText:
//
//  Illegal operation attempted on a registry key which has been marked for deletion.
//

  STATUS_KEY_DELETED = NTSTATUS($C000017C);
  {$EXTERNALSYM STATUS_KEY_DELETED}

//
// MessageId: STATUS_NO_LOG_SPACE
//
// MessageText:
//
//  System could not allocate required space in a registry log.
//

  STATUS_NO_LOG_SPACE = NTSTATUS($C000017D);
  {$EXTERNALSYM STATUS_NO_LOG_SPACE}

//
// MessageId: STATUS_TOO_MANY_SIDS
//
// MessageText:
//
//  Too many Sids have been specified.
//

  STATUS_TOO_MANY_SIDS = NTSTATUS($C000017E);
  {$EXTERNALSYM STATUS_TOO_MANY_SIDS}

//
// MessageId: STATUS_LM_CROSS_ENCRYPTION_REQUIRED
//
// MessageText:
//
//  An attempt was made to change a user password in the security account manager without providing the necessary LM cross-encrypted password.
//

  STATUS_LM_CROSS_ENCRYPTION_REQUIRED = NTSTATUS($C000017F);
  {$EXTERNALSYM STATUS_LM_CROSS_ENCRYPTION_REQUIRED}

//
// MessageId: STATUS_KEY_HAS_CHILDREN
//
// MessageText:
//
//  An attempt was made to create a symbolic link in a registry key that already has subkeys or values.
//

  STATUS_KEY_HAS_CHILDREN = NTSTATUS($C0000180);
  {$EXTERNALSYM STATUS_KEY_HAS_CHILDREN}

//
// MessageId: STATUS_CHILD_MUST_BE_VOLATILE
//
// MessageText:
//
//  An attempt was made to create a Stable subkey under a Volatile parent key.
//

  STATUS_CHILD_MUST_BE_VOLATILE = NTSTATUS($C0000181);
  {$EXTERNALSYM STATUS_CHILD_MUST_BE_VOLATILE}

//
// MessageId: STATUS_DEVICE_CONFIGURATION_ERROR
//
// MessageText:
//
//  The I/O device is configured incorrectly or the configuration parameters to the driver are incorrect.
//

  STATUS_DEVICE_CONFIGURATION_ERROR = NTSTATUS($C0000182);
  {$EXTERNALSYM STATUS_DEVICE_CONFIGURATION_ERROR}

//
// MessageId: STATUS_DRIVER_INTERNAL_ERROR
//
// MessageText:
//
//  An error was detected between two drivers or within an I/O driver.
//

  STATUS_DRIVER_INTERNAL_ERROR = NTSTATUS($C0000183);
  {$EXTERNALSYM STATUS_DRIVER_INTERNAL_ERROR}

//
// MessageId: STATUS_INVALID_DEVICE_STATE
//
// MessageText:
//
//  The device is not in a valid state to perform this request.
//

  STATUS_INVALID_DEVICE_STATE = NTSTATUS($C0000184);
  {$EXTERNALSYM STATUS_INVALID_DEVICE_STATE}

//
// MessageId: STATUS_IO_DEVICE_ERROR
//
// MessageText:
//
//  The I/O device reported an I/O error.
//

  STATUS_IO_DEVICE_ERROR = NTSTATUS($C0000185);
  {$EXTERNALSYM STATUS_IO_DEVICE_ERROR}

//
// MessageId: STATUS_DEVICE_PROTOCOL_ERROR
//
// MessageText:
//
//  A protocol error was detected between the driver and the device.
//

  STATUS_DEVICE_PROTOCOL_ERROR = NTSTATUS($C0000186);
  {$EXTERNALSYM STATUS_DEVICE_PROTOCOL_ERROR}

//
// MessageId: STATUS_BACKUP_CONTROLLER
//
// MessageText:
//
//  This operation is only allowed for the Primary Domain Controller of the domain.
//

  STATUS_BACKUP_CONTROLLER = NTSTATUS($C0000187);
  {$EXTERNALSYM STATUS_BACKUP_CONTROLLER}

//
// MessageId: STATUS_LOG_FILE_FULL
//
// MessageText:
//
//  Log file space is insufficient to support this operation.
//

  STATUS_LOG_FILE_FULL = NTSTATUS($C0000188);
  {$EXTERNALSYM STATUS_LOG_FILE_FULL}

//
// MessageId: STATUS_TOO_LATE
//
// MessageText:
//
//  A write operation was attempted to a volume after it was dismounted.
//

  STATUS_TOO_LATE = NTSTATUS($C0000189);
  {$EXTERNALSYM STATUS_TOO_LATE}

//
// MessageId: STATUS_NO_TRUST_LSA_SECRET
//
// MessageText:
//
//  The workstation does not have a trust secret for the primary domain in the local LSA database.
//

  STATUS_NO_TRUST_LSA_SECRET = NTSTATUS($C000018A);
  {$EXTERNALSYM STATUS_NO_TRUST_LSA_SECRET}

//
// MessageId: STATUS_NO_TRUST_SAM_ACCOUNT
//
// MessageText:
//
//  The SAM database on the Windows Server does not have a computer account for this workstation trust relationship.
//

  STATUS_NO_TRUST_SAM_ACCOUNT = NTSTATUS($C000018B);
  {$EXTERNALSYM STATUS_NO_TRUST_SAM_ACCOUNT}

//
// MessageId: STATUS_TRUSTED_DOMAIN_FAILURE
//
// MessageText:
//
//  The logon request failed because the trust relationship between the primary domain and the trusted domain failed.
//

  STATUS_TRUSTED_DOMAIN_FAILURE = NTSTATUS($C000018C);
  {$EXTERNALSYM STATUS_TRUSTED_DOMAIN_FAILURE}

//
// MessageId: STATUS_TRUSTED_RELATIONSHIP_FAILURE
//
// MessageText:
//
//  The logon request failed because the trust relationship between this workstation and the primary domain failed.
//

  STATUS_TRUSTED_RELATIONSHIP_FAILURE = NTSTATUS($C000018D);
  {$EXTERNALSYM STATUS_TRUSTED_RELATIONSHIP_FAILURE}

//
// MessageId: STATUS_EVENTLOG_FILE_CORRUPT
//
// MessageText:
//
//  The Eventlog log file is corrupt.
//

  STATUS_EVENTLOG_FILE_CORRUPT = NTSTATUS($C000018E);
  {$EXTERNALSYM STATUS_EVENTLOG_FILE_CORRUPT}

//
// MessageId: STATUS_EVENTLOG_CANT_START
//
// MessageText:
//
//  No Eventlog log file could be opened. The Eventlog service did not start.
//

  STATUS_EVENTLOG_CANT_START = NTSTATUS($C000018F);
  {$EXTERNALSYM STATUS_EVENTLOG_CANT_START}

//
// MessageId: STATUS_TRUST_FAILURE
//
// MessageText:
//
//  The network logon failed. This may be because the validation authority can't be reached.
//

  STATUS_TRUST_FAILURE = NTSTATUS($C0000190);
  {$EXTERNALSYM STATUS_TRUST_FAILURE}

//
// MessageId: STATUS_MUTANT_LIMIT_EXCEEDED
//
// MessageText:
//
//  An attempt was made to acquire a mutant such that its maximum count would have been exceeded.
//

  STATUS_MUTANT_LIMIT_EXCEEDED = NTSTATUS($C0000191);
  {$EXTERNALSYM STATUS_MUTANT_LIMIT_EXCEEDED}

//
// MessageId: STATUS_NETLOGON_NOT_STARTED
//
// MessageText:
//
//  An attempt was made to logon, but the netlogon service was not started.
//

  STATUS_NETLOGON_NOT_STARTED = NTSTATUS($C0000192);
  {$EXTERNALSYM STATUS_NETLOGON_NOT_STARTED}

//
// MessageId: STATUS_ACCOUNT_EXPIRED
//
// MessageText:
//
//  The user's account has expired.
//

  STATUS_ACCOUNT_EXPIRED = NTSTATUS($C0000193); // ntsubauth
  {$EXTERNALSYM STATUS_ACCOUNT_EXPIRED}

//
// MessageId: STATUS_POSSIBLE_DEADLOCK
//
// MessageText:
//
//  {EXCEPTION}
//  Possible deadlock condition.
//

  STATUS_POSSIBLE_DEADLOCK = NTSTATUS($C0000194);
  {$EXTERNALSYM STATUS_POSSIBLE_DEADLOCK}

//
// MessageId: STATUS_NETWORK_CREDENTIAL_CONFLICT
//
// MessageText:
//
//  The credentials supplied conflict with an existing set of credentials.
//

  STATUS_NETWORK_CREDENTIAL_CONFLICT = NTSTATUS($C0000195);
  {$EXTERNALSYM STATUS_NETWORK_CREDENTIAL_CONFLICT}

//
// MessageId: STATUS_REMOTE_SESSION_LIMIT
//
// MessageText:
//
//  An attempt was made to establish a session to a network server, but there are already too many sessions established to that server.
//

  STATUS_REMOTE_SESSION_LIMIT = NTSTATUS($C0000196);
  {$EXTERNALSYM STATUS_REMOTE_SESSION_LIMIT}

//
// MessageId: STATUS_EVENTLOG_FILE_CHANGED
//
// MessageText:
//
//  The log file has changed between reads.
//

  STATUS_EVENTLOG_FILE_CHANGED = NTSTATUS($C0000197);
  {$EXTERNALSYM STATUS_EVENTLOG_FILE_CHANGED}

//
// MessageId: STATUS_NOLOGON_INTERDOMAIN_TRUST_ACCOUNT
//
// MessageText:
//
//  The account used is an Interdomain Trust account. Use your global user account or local user account to access this server.
//

  STATUS_NOLOGON_INTERDOMAIN_TRUST_ACCOUNT = NTSTATUS($C0000198);
  {$EXTERNALSYM STATUS_NOLOGON_INTERDOMAIN_TRUST_ACCOUNT}

//
// MessageId: STATUS_NOLOGON_WORKSTATION_TRUST_ACCOUNT
//
// MessageText:
//
//  The account used is a Computer Account. Use your global user account or local user account to access this server.
//

  STATUS_NOLOGON_WORKSTATION_TRUST_ACCOUNT = NTSTATUS($C0000199);
  {$EXTERNALSYM STATUS_NOLOGON_WORKSTATION_TRUST_ACCOUNT}

//
// MessageId: STATUS_NOLOGON_SERVER_TRUST_ACCOUNT
//
// MessageText:
//
//  The account used is an Server Trust account. Use your global user account or local user account to access this server.
//

  STATUS_NOLOGON_SERVER_TRUST_ACCOUNT = NTSTATUS($C000019A);
  {$EXTERNALSYM STATUS_NOLOGON_SERVER_TRUST_ACCOUNT}

//
// MessageId: STATUS_DOMAIN_TRUST_INCONSISTENT
//
// MessageText:
//
//  The name or SID of the domain specified is inconsistent with the trust information for that domain.
//

  STATUS_DOMAIN_TRUST_INCONSISTENT = NTSTATUS($C000019B);
  {$EXTERNALSYM STATUS_DOMAIN_TRUST_INCONSISTENT}

//
// MessageId: STATUS_FS_DRIVER_REQUIRED
//
// MessageText:
//
//  A volume has been accessed for which a file system driver is required that has not yet been loaded.
//

  STATUS_FS_DRIVER_REQUIRED = NTSTATUS($C000019C);
  {$EXTERNALSYM STATUS_FS_DRIVER_REQUIRED}

//
// MessageId: STATUS_NO_USER_SESSION_KEY
//
// MessageText:
//
//  There is no user session key for the specified logon session.
//

  STATUS_NO_USER_SESSION_KEY = NTSTATUS($C0000202);
  {$EXTERNALSYM STATUS_NO_USER_SESSION_KEY}

//
// MessageId: STATUS_USER_SESSION_DELETED
//
// MessageText:
//
//  The remote user session has been deleted.
//

  STATUS_USER_SESSION_DELETED = NTSTATUS($C0000203);
  {$EXTERNALSYM STATUS_USER_SESSION_DELETED}

//
// MessageId: STATUS_RESOURCE_LANG_NOT_FOUND
//
// MessageText:
//
//  Indicates the specified resource language ID cannot be found in the
//  image file.
//

  STATUS_RESOURCE_LANG_NOT_FOUND = NTSTATUS($C0000204);
  {$EXTERNALSYM STATUS_RESOURCE_LANG_NOT_FOUND}

//
// MessageId: STATUS_INSUFF_SERVER_RESOURCES
//
// MessageText:
//
//  Insufficient server resources exist to complete the request.
//

  STATUS_INSUFF_SERVER_RESOURCES = NTSTATUS($C0000205);
  {$EXTERNALSYM STATUS_INSUFF_SERVER_RESOURCES}

//
// MessageId: STATUS_INVALID_BUFFER_SIZE
//
// MessageText:
//
//  The size of the buffer is invalid for the specified operation.
//

  STATUS_INVALID_BUFFER_SIZE = NTSTATUS($C0000206);
  {$EXTERNALSYM STATUS_INVALID_BUFFER_SIZE}

//
// MessageId: STATUS_INVALID_ADDRESS_COMPONENT
//
// MessageText:
//
//  The transport rejected the network address specified as invalid.
//

  STATUS_INVALID_ADDRESS_COMPONENT = NTSTATUS($C0000207);
  {$EXTERNALSYM STATUS_INVALID_ADDRESS_COMPONENT}

//
// MessageId: STATUS_INVALID_ADDRESS_WILDCARD
//
// MessageText:
//
//  The transport rejected the network address specified due to an
//  invalid use of a wildcard.
//

  STATUS_INVALID_ADDRESS_WILDCARD = NTSTATUS($C0000208);
  {$EXTERNALSYM STATUS_INVALID_ADDRESS_WILDCARD}

//
// MessageId: STATUS_TOO_MANY_ADDRESSES
//
// MessageText:
//
//  The transport address could not be opened because all the available
//  addresses are in use.
//

  STATUS_TOO_MANY_ADDRESSES = NTSTATUS($C0000209);
  {$EXTERNALSYM STATUS_TOO_MANY_ADDRESSES}

//
// MessageId: STATUS_ADDRESS_ALREADY_EXISTS
//
// MessageText:
//
//  The transport address could not be opened because it already exists.
//

  STATUS_ADDRESS_ALREADY_EXISTS = NTSTATUS($C000020A);
  {$EXTERNALSYM STATUS_ADDRESS_ALREADY_EXISTS}

//
// MessageId: STATUS_ADDRESS_CLOSED
//
// MessageText:
//
//  The transport address is now closed.
//

  STATUS_ADDRESS_CLOSED = NTSTATUS($C000020B);
  {$EXTERNALSYM STATUS_ADDRESS_CLOSED}

//
// MessageId: STATUS_CONNECTION_DISCONNECTED
//
// MessageText:
//
//  The transport connection is now disconnected.
//

  STATUS_CONNECTION_DISCONNECTED = NTSTATUS($C000020C);
  {$EXTERNALSYM STATUS_CONNECTION_DISCONNECTED}

//
// MessageId: STATUS_CONNECTION_RESET
//
// MessageText:
//
//  The transport connection has been reset.
//

  STATUS_CONNECTION_RESET = NTSTATUS($C000020D);
  {$EXTERNALSYM STATUS_CONNECTION_RESET}

//
// MessageId: STATUS_TOO_MANY_NODES
//
// MessageText:
//
//  The transport cannot dynamically acquire any more nodes.
//

  STATUS_TOO_MANY_NODES = NTSTATUS($C000020E);
  {$EXTERNALSYM STATUS_TOO_MANY_NODES}

//
// MessageId: STATUS_TRANSACTION_ABORTED
//
// MessageText:
//
//  The transport aborted a pending transaction.
//

  STATUS_TRANSACTION_ABORTED = NTSTATUS($C000020F);
  {$EXTERNALSYM STATUS_TRANSACTION_ABORTED}

//
// MessageId: STATUS_TRANSACTION_TIMED_OUT
//
// MessageText:
//
//  The transport timed out a request waiting for a response.
//

  STATUS_TRANSACTION_TIMED_OUT = NTSTATUS($C0000210);
  {$EXTERNALSYM STATUS_TRANSACTION_TIMED_OUT}

//
// MessageId: STATUS_TRANSACTION_NO_RELEASE
//
// MessageText:
//
//  The transport did not receive a release for a pending response.
//

  STATUS_TRANSACTION_NO_RELEASE = NTSTATUS($C0000211);
  {$EXTERNALSYM STATUS_TRANSACTION_NO_RELEASE}

//
// MessageId: STATUS_TRANSACTION_NO_MATCH
//
// MessageText:
//
//  The transport did not find a transaction matching the specific
//  token.
//

  STATUS_TRANSACTION_NO_MATCH = NTSTATUS($C0000212);
  {$EXTERNALSYM STATUS_TRANSACTION_NO_MATCH}

//
// MessageId: STATUS_TRANSACTION_RESPONDED
//
// MessageText:
//
//  The transport had previously responded to a transaction request.
//

  STATUS_TRANSACTION_RESPONDED = NTSTATUS($C0000213);
  {$EXTERNALSYM STATUS_TRANSACTION_RESPONDED}

//
// MessageId: STATUS_TRANSACTION_INVALID_ID
//
// MessageText:
//
//  The transport does not recognized the transaction request identifier specified.
//

  STATUS_TRANSACTION_INVALID_ID = NTSTATUS($C0000214);
  {$EXTERNALSYM STATUS_TRANSACTION_INVALID_ID}

//
// MessageId: STATUS_TRANSACTION_INVALID_TYPE
//
// MessageText:
//
//  The transport does not recognize the transaction request type specified.
//

  STATUS_TRANSACTION_INVALID_TYPE = NTSTATUS($C0000215);
  {$EXTERNALSYM STATUS_TRANSACTION_INVALID_TYPE}

//
// MessageId: STATUS_NOT_SERVER_SESSION
//
// MessageText:
//
//  The transport can only process the specified request on the server side of a session.
//

  STATUS_NOT_SERVER_SESSION = NTSTATUS($C0000216);
  {$EXTERNALSYM STATUS_NOT_SERVER_SESSION}

//
// MessageId: STATUS_NOT_CLIENT_SESSION
//
// MessageText:
//
//  The transport can only process the specified request on the client side of a session.
//

  STATUS_NOT_CLIENT_SESSION = NTSTATUS($C0000217);
  {$EXTERNALSYM STATUS_NOT_CLIENT_SESSION}

//
// MessageId: STATUS_CANNOT_LOAD_REGISTRY_FILE
//
// MessageText:
//
//  {Registry File Failure}
//  The registry cannot load the hive (file):
//  %hs
//  or its log or alternate.
//  It is corrupt, absent, or not writable.
//

  STATUS_CANNOT_LOAD_REGISTRY_FILE = NTSTATUS($C0000218);
  {$EXTERNALSYM STATUS_CANNOT_LOAD_REGISTRY_FILE}

//
// MessageId: STATUS_DEBUG_ATTACH_FAILED
//
// MessageText:
//
//  {Unexpected Failure in DebugActiveProcess}
//  An unexpected failure occurred while processing a DebugActiveProcess API request. You may choose OK to terminate the process, or Cancel to ignore the error.
//

  STATUS_DEBUG_ATTACH_FAILED = NTSTATUS($C0000219);
  {$EXTERNALSYM STATUS_DEBUG_ATTACH_FAILED}

//
// MessageId: STATUS_SYSTEM_PROCESS_TERMINATED
//
// MessageText:
//
//  {Fatal System Error}
//  The %hs system process terminated unexpectedly
//  with a status of 0x%08x (0x%08x 0x%08x).
//  The system has been shut down.
//

  STATUS_SYSTEM_PROCESS_TERMINATED = NTSTATUS($C000021A);
  {$EXTERNALSYM STATUS_SYSTEM_PROCESS_TERMINATED}

//
// MessageId: STATUS_DATA_NOT_ACCEPTED
//
// MessageText:
//
//  {Data Not Accepted}
//  The TDI client could not handle the data received during an indication.
//

  STATUS_DATA_NOT_ACCEPTED = NTSTATUS($C000021B);
  {$EXTERNALSYM STATUS_DATA_NOT_ACCEPTED}

//
// MessageId: STATUS_NO_BROWSER_SERVERS_FOUND
//
// MessageText:
//
//  {Unable to Retrieve Browser Server List}
//  The list of servers for this workgroup is not currently available.
//

  STATUS_NO_BROWSER_SERVERS_FOUND = NTSTATUS($C000021C);
  {$EXTERNALSYM STATUS_NO_BROWSER_SERVERS_FOUND}

//
// MessageId: STATUS_VDM_HARD_ERROR
//
// MessageText:
//
//  NTVDM encountered a hard error.
//

  STATUS_VDM_HARD_ERROR = NTSTATUS($C000021D);
  {$EXTERNALSYM STATUS_VDM_HARD_ERROR}

//
// MessageId: STATUS_DRIVER_CANCEL_TIMEOUT
//
// MessageText:
//
//  {Cancel Timeout}
//  The driver %hs failed to complete a cancelled I/O request in the allotted time.
//

  STATUS_DRIVER_CANCEL_TIMEOUT = NTSTATUS($C000021E);
  {$EXTERNALSYM STATUS_DRIVER_CANCEL_TIMEOUT}

//
// MessageId: STATUS_REPLY_MESSAGE_MISMATCH
//
// MessageText:
//
//  {Reply Message Mismatch}
//  An attempt was made to reply to an LPC message, but the thread specified by the client ID in the message was not waiting on that message.
//

  STATUS_REPLY_MESSAGE_MISMATCH = NTSTATUS($C000021F);
  {$EXTERNALSYM STATUS_REPLY_MESSAGE_MISMATCH}

//
// MessageId: STATUS_MAPPED_ALIGNMENT
//
// MessageText:
//
//  {Mapped View Alignment Incorrect}
//  An attempt was made to map a view of a file, but either the specified base address or the offset into the file were not aligned on the proper allocation granularity.
//

  STATUS_MAPPED_ALIGNMENT = NTSTATUS($C0000220);
  {$EXTERNALSYM STATUS_MAPPED_ALIGNMENT}

//
// MessageId: STATUS_IMAGE_CHECKSUM_MISMATCH
//
// MessageText:
//
//  {Bad Image Checksum}
//  The image %hs is possibly corrupt. The header checksum does not match the computed checksum.
//

  STATUS_IMAGE_CHECKSUM_MISMATCH = NTSTATUS($C0000221);
  {$EXTERNALSYM STATUS_IMAGE_CHECKSUM_MISMATCH}

//
// MessageId: STATUS_LOST_WRITEBEHIND_DATA
//
// MessageText:
//
//  {Delayed Write Failed}
//  Windows was unable to save all the data for the file %hs. The data has been lost.
//  This error may be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere.
//

  STATUS_LOST_WRITEBEHIND_DATA = NTSTATUS($C0000222);
  {$EXTERNALSYM STATUS_LOST_WRITEBEHIND_DATA}

//
// MessageId: STATUS_CLIENT_SERVER_PARAMETERS_INVALID
//
// MessageText:
//
//  The parameter(s) passed to the server in the client/server shared memory
//  window were invalid. Too much data may have been put in the shared memory window.
//

  STATUS_CLIENT_SERVER_PARAMETERS_INVALID = NTSTATUS($C0000223);
  {$EXTERNALSYM STATUS_CLIENT_SERVER_PARAMETERS_INVALID}

//
// MessageId: STATUS_PASSWORD_MUST_CHANGE
//
// MessageText:
//
//  The user's password must be changed before logging on the first time.
//

  STATUS_PASSWORD_MUST_CHANGE = NTSTATUS($C0000224); // ntsubauth
  {$EXTERNALSYM STATUS_PASSWORD_MUST_CHANGE}

//
// MessageId: STATUS_NOT_FOUND
//
// MessageText:
//
//  The object was not found.
//

  STATUS_NOT_FOUND = NTSTATUS($C0000225);
  {$EXTERNALSYM STATUS_NOT_FOUND}

//
// MessageId: STATUS_NOT_TINY_STREAM
//
// MessageText:
//
//  The stream is not a tiny stream.
//

  STATUS_NOT_TINY_STREAM = NTSTATUS($C0000226);
  {$EXTERNALSYM STATUS_NOT_TINY_STREAM}

//
// MessageId: STATUS_RECOVERY_FAILURE
//
// MessageText:
//
//  A transaction recover failed.
//

  STATUS_RECOVERY_FAILURE = NTSTATUS($C0000227);
  {$EXTERNALSYM STATUS_RECOVERY_FAILURE}

//
// MessageId: STATUS_STACK_OVERFLOW_READ
//
// MessageText:
//
//  The request must be handled by the stack overflow code.
//

  STATUS_STACK_OVERFLOW_READ = NTSTATUS($C0000228);
  {$EXTERNALSYM STATUS_STACK_OVERFLOW_READ}

//
// MessageId: STATUS_FAIL_CHECK
//
// MessageText:
//
//  A consistency check failed.
//

  STATUS_FAIL_CHECK = NTSTATUS($C0000229);
  {$EXTERNALSYM STATUS_FAIL_CHECK}

//
// MessageId: STATUS_DUPLICATE_OBJECTID
//
// MessageText:
//
//  The attempt to insert the ID in the index failed because the ID is already in the index.
//

  STATUS_DUPLICATE_OBJECTID = NTSTATUS($C000022A);
  {$EXTERNALSYM STATUS_DUPLICATE_OBJECTID}

//
// MessageId: STATUS_OBJECTID_EXISTS
//
// MessageText:
//
//  The attempt to set the object's ID failed because the object already has an ID.
//

  STATUS_OBJECTID_EXISTS = NTSTATUS($C000022B);
  {$EXTERNALSYM STATUS_OBJECTID_EXISTS}

//
// MessageId: STATUS_CONVERT_TO_LARGE
//
// MessageText:
//
//  Internal OFS status codes indicating how an allocation operation is handled. Either it is retried after the containing onode is moved or the extent stream is converted to a large stream.
//

  STATUS_CONVERT_TO_LARGE = NTSTATUS($C000022C);
  {$EXTERNALSYM STATUS_CONVERT_TO_LARGE}

//
// MessageId: STATUS_RETRY
//
// MessageText:
//
//  The request needs to be retried.
//

  STATUS_RETRY = NTSTATUS($C000022D);
  {$EXTERNALSYM STATUS_RETRY}

//
// MessageId: STATUS_FOUND_OUT_OF_SCOPE
//
// MessageText:
//
//  The attempt to find the object found an object matching by ID on the volume but it is out of the scope of the handle used for the operation.
//

  STATUS_FOUND_OUT_OF_SCOPE = NTSTATUS($C000022E);
  {$EXTERNALSYM STATUS_FOUND_OUT_OF_SCOPE}

//
// MessageId: STATUS_ALLOCATE_BUCKET
//
// MessageText:
//
//  The bucket array must be grown. Retry transaction after doing so.
//

  STATUS_ALLOCATE_BUCKET = NTSTATUS($C000022F);
  {$EXTERNALSYM STATUS_ALLOCATE_BUCKET}

//
// MessageId: STATUS_PROPSET_NOT_FOUND
//
// MessageText:
//
//  The property set specified does not exist on the object.
//

  STATUS_PROPSET_NOT_FOUND = NTSTATUS($C0000230);
  {$EXTERNALSYM STATUS_PROPSET_NOT_FOUND}

//
// MessageId: STATUS_MARSHALL_OVERFLOW
//
// MessageText:
//
//  The user/kernel marshalling buffer has overflowed.
//

  STATUS_MARSHALL_OVERFLOW = NTSTATUS($C0000231);
  {$EXTERNALSYM STATUS_MARSHALL_OVERFLOW}

//
// MessageId: STATUS_INVALID_VARIANT
//
// MessageText:
//
//  The supplied variant structure contains invalid data.
//

  STATUS_INVALID_VARIANT = NTSTATUS($C0000232);
  {$EXTERNALSYM STATUS_INVALID_VARIANT}

//
// MessageId: STATUS_DOMAIN_CONTROLLER_NOT_FOUND
//
// MessageText:
//
//  Could not find a domain controller for this domain.
//

  STATUS_DOMAIN_CONTROLLER_NOT_FOUND = NTSTATUS($C0000233);
  {$EXTERNALSYM STATUS_DOMAIN_CONTROLLER_NOT_FOUND}

//
// MessageId: STATUS_ACCOUNT_LOCKED_OUT
//
// MessageText:
//
//  The user account has been automatically locked because too many invalid logon attempts or password change attempts have been requested.
//

  STATUS_ACCOUNT_LOCKED_OUT = NTSTATUS($C0000234); // ntsubauth
  {$EXTERNALSYM STATUS_ACCOUNT_LOCKED_OUT}

//
// MessageId: STATUS_HANDLE_NOT_CLOSABLE
//
// MessageText:
//
//  NtClose was called on a handle that was protected from close via NtSetInformationObject.
//

  STATUS_HANDLE_NOT_CLOSABLE = NTSTATUS($C0000235);
  {$EXTERNALSYM STATUS_HANDLE_NOT_CLOSABLE}

//
// MessageId: STATUS_CONNECTION_REFUSED
//
// MessageText:
//
//  The transport connection attempt was refused by the remote system.
//

  STATUS_CONNECTION_REFUSED = NTSTATUS($C0000236);
  {$EXTERNALSYM STATUS_CONNECTION_REFUSED}

//
// MessageId: STATUS_GRACEFUL_DISCONNECT
//
// MessageText:
//
//  The transport connection was gracefully closed.
//

  STATUS_GRACEFUL_DISCONNECT = NTSTATUS($C0000237);
  {$EXTERNALSYM STATUS_GRACEFUL_DISCONNECT}

//
// MessageId: STATUS_ADDRESS_ALREADY_ASSOCIATED
//
// MessageText:
//
//  The transport endpoint already has an address associated with it.
//

  STATUS_ADDRESS_ALREADY_ASSOCIATED = NTSTATUS($C0000238);
  {$EXTERNALSYM STATUS_ADDRESS_ALREADY_ASSOCIATED}

//
// MessageId: STATUS_ADDRESS_NOT_ASSOCIATED
//
// MessageText:
//
//  An address has not yet been associated with the transport endpoint.
//

  STATUS_ADDRESS_NOT_ASSOCIATED = NTSTATUS($C0000239);
  {$EXTERNALSYM STATUS_ADDRESS_NOT_ASSOCIATED}

//
// MessageId: STATUS_CONNECTION_INVALID
//
// MessageText:
//
//  An operation was attempted on a nonexistent transport connection.
//

  STATUS_CONNECTION_INVALID = NTSTATUS($C000023A);
  {$EXTERNALSYM STATUS_CONNECTION_INVALID}

//
// MessageId: STATUS_CONNECTION_ACTIVE
//
// MessageText:
//
//  An invalid operation was attempted on an active transport connection.
//

  STATUS_CONNECTION_ACTIVE = NTSTATUS($C000023B);
  {$EXTERNALSYM STATUS_CONNECTION_ACTIVE}

//
// MessageId: STATUS_NETWORK_UNREACHABLE
//
// MessageText:
//
//  The remote network is not reachable by the transport.
//

  STATUS_NETWORK_UNREACHABLE = NTSTATUS($C000023C);
  {$EXTERNALSYM STATUS_NETWORK_UNREACHABLE}

//
// MessageId: STATUS_HOST_UNREACHABLE
//
// MessageText:
//
//  The remote system is not reachable by the transport.
//

  STATUS_HOST_UNREACHABLE = NTSTATUS($C000023D);
  {$EXTERNALSYM STATUS_HOST_UNREACHABLE}

//
// MessageId: STATUS_PROTOCOL_UNREACHABLE
//
// MessageText:
//
//  The remote system does not support the transport protocol.
//

  STATUS_PROTOCOL_UNREACHABLE = NTSTATUS($C000023E);
  {$EXTERNALSYM STATUS_PROTOCOL_UNREACHABLE}

//
// MessageId: STATUS_PORT_UNREACHABLE
//
// MessageText:
//
//  No service is operating at the destination port of the transport on the remote system.
//

  STATUS_PORT_UNREACHABLE = NTSTATUS($C000023F);
  {$EXTERNALSYM STATUS_PORT_UNREACHABLE}

//
// MessageId: STATUS_REQUEST_ABORTED
//
// MessageText:
//
//  The request was aborted.
//

  STATUS_REQUEST_ABORTED = NTSTATUS($C0000240);
  {$EXTERNALSYM STATUS_REQUEST_ABORTED}

//
// MessageId: STATUS_CONNECTION_ABORTED
//
// MessageText:
//
//  The transport connection was aborted by the local system.
//

  STATUS_CONNECTION_ABORTED = NTSTATUS($C0000241);
  {$EXTERNALSYM STATUS_CONNECTION_ABORTED}

//
// MessageId: STATUS_BAD_COMPRESSION_BUFFER
//
// MessageText:
//
//  The specified buffer contains ill-formed data.
//

  STATUS_BAD_COMPRESSION_BUFFER = NTSTATUS($C0000242);
  {$EXTERNALSYM STATUS_BAD_COMPRESSION_BUFFER}

//
// MessageId: STATUS_USER_MAPPED_FILE
//
// MessageText:
//
//  The requested operation cannot be performed on a file with a user mapped section open.
//

  STATUS_USER_MAPPED_FILE = NTSTATUS($C0000243);
  {$EXTERNALSYM STATUS_USER_MAPPED_FILE}

//
// MessageId: STATUS_AUDIT_FAILED
//
// MessageText:
//
//  {Audit Failed}
//  An attempt to generate a security audit failed.
//

  STATUS_AUDIT_FAILED = NTSTATUS($C0000244);
  {$EXTERNALSYM STATUS_AUDIT_FAILED}

//
// MessageId: STATUS_TIMER_RESOLUTION_NOT_SET
//
// MessageText:
//
//  The timer resolution was not previously set by the current process.
//

  STATUS_TIMER_RESOLUTION_NOT_SET = NTSTATUS($C0000245);
  {$EXTERNALSYM STATUS_TIMER_RESOLUTION_NOT_SET}

//
// MessageId: STATUS_CONNECTION_COUNT_LIMIT
//
// MessageText:
//
//  A connection to the server could not be made because the limit on the number of concurrent connections for this account has been reached.
//

  STATUS_CONNECTION_COUNT_LIMIT = NTSTATUS($C0000246);
  {$EXTERNALSYM STATUS_CONNECTION_COUNT_LIMIT}

//
// MessageId: STATUS_LOGIN_TIME_RESTRICTION
//
// MessageText:
//
//  Attempting to login during an unauthorized time of day for this account.
//

  STATUS_LOGIN_TIME_RESTRICTION = NTSTATUS($C0000247);
  {$EXTERNALSYM STATUS_LOGIN_TIME_RESTRICTION}

//
// MessageId: STATUS_LOGIN_WKSTA_RESTRICTION
//
// MessageText:
//
//  The account is not authorized to login from this station.
//

  STATUS_LOGIN_WKSTA_RESTRICTION = NTSTATUS($C0000248);
  {$EXTERNALSYM STATUS_LOGIN_WKSTA_RESTRICTION}

//
// MessageId: STATUS_IMAGE_MP_UP_MISMATCH
//
// MessageText:
//
//  {UP/MP Image Mismatch}
//  The image %hs has been modified for use on a uniprocessor system, but you are running it on a multiprocessor machine.
//  Please reinstall the image file.
//

  STATUS_IMAGE_MP_UP_MISMATCH = NTSTATUS($C0000249);
  {$EXTERNALSYM STATUS_IMAGE_MP_UP_MISMATCH}

//
// MessageId: STATUS_INSUFFICIENT_LOGON_INFO
//
// MessageText:
//
//  There is insufficient account information to log you on.
//

  STATUS_INSUFFICIENT_LOGON_INFO = NTSTATUS($C0000250);
  {$EXTERNALSYM STATUS_INSUFFICIENT_LOGON_INFO}

//
// MessageId: STATUS_BAD_DLL_ENTRYPOINT
//
// MessageText:
//
//  {Invalid DLL Entrypoint}
//  The dynamic link library %hs is not written correctly. The stack pointer has been left in an inconsistent state.
//  The entrypoint should be declared as WINAPI or STDCALL. Select YES to fail the DLL load. Select NO to continue
//  execution. Selecting NO may cause the application to operate incorrectly.
//

  STATUS_BAD_DLL_ENTRYPOINT = NTSTATUS($C0000251);
  {$EXTERNALSYM STATUS_BAD_DLL_ENTRYPOINT}

//
// MessageId: STATUS_BAD_SERVICE_ENTRYPOINT
//
// MessageText:
//
//  {Invalid Service Callback Entrypoint}
//  The %hs service is not written correctly. The stack pointer has been left in an inconsistent state.
//  The callback entrypoint should be declared as WINAPI or STDCALL. Selecting OK will cause the
//  service to continue operation. However, the service process may operate incorrectly.
//

  STATUS_BAD_SERVICE_ENTRYPOINT = NTSTATUS($C0000252);
  {$EXTERNALSYM STATUS_BAD_SERVICE_ENTRYPOINT}

//
// MessageId: STATUS_LPC_REPLY_LOST
//
// MessageText:
//
//  The server received the messages but did not send a reply.
//

  STATUS_LPC_REPLY_LOST = NTSTATUS($C0000253);
  {$EXTERNALSYM STATUS_LPC_REPLY_LOST}

//
// MessageId: STATUS_IP_ADDRESS_CONFLICT1
//
// MessageText:
//
//  The system has detected an IP address conflict with another system on the network. The local interface has been disabled.
//  More details are available in the system event log.
//  Consult your network administrator to resolve the conflict.
//

  STATUS_IP_ADDRESS_CONFLICT1 = NTSTATUS($C0000254);
  {$EXTERNALSYM STATUS_IP_ADDRESS_CONFLICT1}

//
// MessageId: STATUS_IP_ADDRESS_CONFLICT2
//
// MessageText:
//
//  The system has detected an IP address conflict with another system on the network. Network operations on this system may be disrupted as a result.
//  More details are available in the system event log.
//  Consult your network administrator immediately to resolve the conflict.
//

  STATUS_IP_ADDRESS_CONFLICT2 = NTSTATUS($C0000255);
  {$EXTERNALSYM STATUS_IP_ADDRESS_CONFLICT2}

//
// MessageId: STATUS_REGISTRY_QUOTA_LIMIT
//
// MessageText:
//
//  {Low On Registry Space}
//  Your maximum registry size is too small. To ensure that Windows runs properly, increase your maximum registry size. For more information, see Help.
//

  STATUS_REGISTRY_QUOTA_LIMIT = NTSTATUS($C0000256);
  {$EXTERNALSYM STATUS_REGISTRY_QUOTA_LIMIT}

//
// MessageId: STATUS_PATH_NOT_COVERED
//
// MessageText:
//
//  The contacted server does not support the indicated part of the DFS namespace.
//

  STATUS_PATH_NOT_COVERED = NTSTATUS($C0000257);
  {$EXTERNALSYM STATUS_PATH_NOT_COVERED}

//
// MessageId: STATUS_NO_CALLBACK_ACTIVE
//
// MessageText:
//
//  A callback return system service cannot be executed when no callback is active.
//

  STATUS_NO_CALLBACK_ACTIVE = NTSTATUS($C0000258);
  {$EXTERNALSYM STATUS_NO_CALLBACK_ACTIVE}

//
// MessageId: STATUS_LICENSE_QUOTA_EXCEEDED
//
// MessageText:
//
//  The service being accessed is licensed for a particular number of connections.
//  No more connections can be made to the service at this time because there are already as many connections as the service can accept.
//

  STATUS_LICENSE_QUOTA_EXCEEDED = NTSTATUS($C0000259);
  {$EXTERNALSYM STATUS_LICENSE_QUOTA_EXCEEDED}

//
// MessageId: STATUS_PWD_TOO_SHORT
//
// MessageText:
//
//  The password provided is too short to meet the policy of your user account.
//  Please choose a longer password.
//

  STATUS_PWD_TOO_SHORT = NTSTATUS($C000025A);
  {$EXTERNALSYM STATUS_PWD_TOO_SHORT}

//
// MessageId: STATUS_PWD_TOO_RECENT
//
// MessageText:
//
//  The policy of your user account does not allow you to change passwords too frequently.
//  This is done to prevent users from changing back to a familiar, but potentially discovered, password.
//  If you feel your password has been compromised then please contact your administrator immediately to have a new one assigned.
//

  STATUS_PWD_TOO_RECENT = NTSTATUS($C000025B);
  {$EXTERNALSYM STATUS_PWD_TOO_RECENT}

//
// MessageId: STATUS_PWD_HISTORY_CONFLICT
//
// MessageText:
//
//  You have attempted to change your password to one that you have used in the past.
//  The policy of your user account does not allow this. Please select a password that you have not previously used.
//

  STATUS_PWD_HISTORY_CONFLICT = NTSTATUS($C000025C);
  {$EXTERNALSYM STATUS_PWD_HISTORY_CONFLICT}

//
// MessageId: STATUS_PLUGPLAY_NO_DEVICE
//
// MessageText:
//
//  You have attempted to load a legacy device driver while its device instance had been disabled.
//

  STATUS_PLUGPLAY_NO_DEVICE = NTSTATUS($C000025E);
  {$EXTERNALSYM STATUS_PLUGPLAY_NO_DEVICE}

//
// MessageId: STATUS_UNSUPPORTED_COMPRESSION
//
// MessageText:
//
//  The specified compression format is unsupported.
//

  STATUS_UNSUPPORTED_COMPRESSION = NTSTATUS($C000025F);
  {$EXTERNALSYM STATUS_UNSUPPORTED_COMPRESSION}

//
// MessageId: STATUS_INVALID_HW_PROFILE
//
// MessageText:
//
//  The specified hardware profile configuration is invalid.
//

  STATUS_INVALID_HW_PROFILE = NTSTATUS($C0000260);
  {$EXTERNALSYM STATUS_INVALID_HW_PROFILE}

//
// MessageId: STATUS_INVALID_PLUGPLAY_DEVICE_PATH
//
// MessageText:
//
//  The specified Plug and Play registry device path is invalid.
//

  STATUS_INVALID_PLUGPLAY_DEVICE_PATH = NTSTATUS($C0000261);
  {$EXTERNALSYM STATUS_INVALID_PLUGPLAY_DEVICE_PATH}

//
// MessageId: STATUS_DRIVER_ORDINAL_NOT_FOUND
//
// MessageText:
//
//  {Driver Entry Point Not Found}
//  The %hs device driver could not locate the ordinal %ld in driver %hs.
//

  STATUS_DRIVER_ORDINAL_NOT_FOUND = NTSTATUS($C0000262);
  {$EXTERNALSYM STATUS_DRIVER_ORDINAL_NOT_FOUND}

//
// MessageId: STATUS_DRIVER_ENTRYPOINT_NOT_FOUND
//
// MessageText:
//
//  {Driver Entry Point Not Found}
//  The %hs device driver could not locate the entry point %hs in driver %hs.
//

  STATUS_DRIVER_ENTRYPOINT_NOT_FOUND = NTSTATUS($C0000263);
  {$EXTERNALSYM STATUS_DRIVER_ENTRYPOINT_NOT_FOUND}

//
// MessageId: STATUS_RESOURCE_NOT_OWNED
//
// MessageText:
//
//  {Application Error}
//  The application attempted to release a resource it did not own. Click on OK to terminate the application.
//

  STATUS_RESOURCE_NOT_OWNED = NTSTATUS($C0000264);
  {$EXTERNALSYM STATUS_RESOURCE_NOT_OWNED}

//
// MessageId: STATUS_TOO_MANY_LINKS
//
// MessageText:
//
//  An attempt was made to create more links on a file than the file system supports.
//

  STATUS_TOO_MANY_LINKS = NTSTATUS($C0000265);
  {$EXTERNALSYM STATUS_TOO_MANY_LINKS}

//
// MessageId: STATUS_QUOTA_LIST_INCONSISTENT
//
// MessageText:
//
//  The specified quota list is internally inconsistent with its descriptor.
//

  STATUS_QUOTA_LIST_INCONSISTENT = NTSTATUS($C0000266);
  {$EXTERNALSYM STATUS_QUOTA_LIST_INCONSISTENT}

//
// MessageId: STATUS_FILE_IS_OFFLINE
//
// MessageText:
//
//  The specified file has been relocated to offline storage.
//

  STATUS_FILE_IS_OFFLINE = NTSTATUS($C0000267);
  {$EXTERNALSYM STATUS_FILE_IS_OFFLINE}

//
// MessageId: STATUS_EVALUATION_EXPIRATION
//
// MessageText:
//
//  {Windows Evaluation Notification}
//  The evaluation period for this installation of Windows has expired. This system will shutdown in 1 hour. To restore access to this installation of Windows, please upgrade this installation using a licensed distribution of this product.
//

  STATUS_EVALUATION_EXPIRATION = NTSTATUS($C0000268);
  {$EXTERNALSYM STATUS_EVALUATION_EXPIRATION}

//
// MessageId: STATUS_ILLEGAL_DLL_RELOCATION
//
// MessageText:
//
//  {Illegal System DLL Relocation}
//  The system DLL %hs was relocated in memory. The application will not run properly.
//  The relocation occurred because the DLL %hs occupied an address range reserved for Windows system DLLs. The vendor supplying the DLL should be contacted for a new DLL.
//

  STATUS_ILLEGAL_DLL_RELOCATION = NTSTATUS($C0000269);
  {$EXTERNALSYM STATUS_ILLEGAL_DLL_RELOCATION}

//
// MessageId: STATUS_LICENSE_VIOLATION
//
// MessageText:
//
//  {License Violation}
//  The system has detected tampering with your registered product type. This is a violation of your software license. Tampering with product type is not permitted.
//

  STATUS_LICENSE_VIOLATION = NTSTATUS($C000026A);
  {$EXTERNALSYM STATUS_LICENSE_VIOLATION}

//
// MessageId: STATUS_DLL_INIT_FAILED_LOGOFF
//
// MessageText:
//
//  {DLL Initialization Failed}
//  The application failed to initialize because the window station is shutting down.
//

  STATUS_DLL_INIT_FAILED_LOGOFF = NTSTATUS($C000026B);
  {$EXTERNALSYM STATUS_DLL_INIT_FAILED_LOGOFF}

//
// MessageId: STATUS_DRIVER_UNABLE_TO_LOAD
//
// MessageText:
//
//  {Unable to Load Device Driver}
//  %hs device driver could not be loaded.
//  Error Status was 0x%x
//

  STATUS_DRIVER_UNABLE_TO_LOAD = NTSTATUS($C000026C);
  {$EXTERNALSYM STATUS_DRIVER_UNABLE_TO_LOAD}

//
// MessageId: STATUS_DFS_UNAVAILABLE
//
// MessageText:
//
//  DFS is unavailable on the contacted server.
//

  STATUS_DFS_UNAVAILABLE = NTSTATUS($C000026D);
  {$EXTERNALSYM STATUS_DFS_UNAVAILABLE}

//
// MessageId: STATUS_VOLUME_DISMOUNTED
//
// MessageText:
//
//  An operation was attempted to a volume after it was dismounted.
//

  STATUS_VOLUME_DISMOUNTED = NTSTATUS($C000026E);
  {$EXTERNALSYM STATUS_VOLUME_DISMOUNTED}

//
// MessageId: STATUS_WX86_INTERNAL_ERROR
//
// MessageText:
//
//  An internal error occurred in the Win32 x86 emulation subsystem.
//

  STATUS_WX86_INTERNAL_ERROR = NTSTATUS($C000026F);
  {$EXTERNALSYM STATUS_WX86_INTERNAL_ERROR}

//
// MessageId: STATUS_WX86_FLOAT_STACK_CHECK
//
// MessageText:
//
//  Win32 x86 emulation subsystem Floating-point stack check.
//

  STATUS_WX86_FLOAT_STACK_CHECK = NTSTATUS($C0000270);
  {$EXTERNALSYM STATUS_WX86_FLOAT_STACK_CHECK}

//
// MessageId: STATUS_VALIDATE_CONTINUE
//
// MessageText:
//
//  The validation process needs to continue on to the next step.
//

  STATUS_VALIDATE_CONTINUE = NTSTATUS($C0000271);
  {$EXTERNALSYM STATUS_VALIDATE_CONTINUE}

//
// MessageId: STATUS_NO_MATCH
//
// MessageText:
//
//  There was no match for the specified key in the index.
//

  STATUS_NO_MATCH = NTSTATUS($C0000272);
  {$EXTERNALSYM STATUS_NO_MATCH}

//
// MessageId: STATUS_NO_MORE_MATCHES
//
// MessageText:
//
//  There are no more matches for the current index enumeration.
//

  STATUS_NO_MORE_MATCHES = NTSTATUS($C0000273);
  {$EXTERNALSYM STATUS_NO_MORE_MATCHES}

//
// MessageId: STATUS_NOT_A_REPARSE_POINT
//
// MessageText:
//
//  The NTFS file or directory is not a reparse point.
//

  STATUS_NOT_A_REPARSE_POINT = NTSTATUS($C0000275);
  {$EXTERNALSYM STATUS_NOT_A_REPARSE_POINT}

//
// MessageId: STATUS_IO_REPARSE_TAG_INVALID
//
// MessageText:
//
//  The Windows I/O reparse tag passed for the NTFS reparse point is invalid.
//

  STATUS_IO_REPARSE_TAG_INVALID = NTSTATUS($C0000276);
  {$EXTERNALSYM STATUS_IO_REPARSE_TAG_INVALID}

//
// MessageId: STATUS_IO_REPARSE_TAG_MISMATCH
//
// MessageText:
//
//  The Windows I/O reparse tag does not match the one present in the NTFS reparse point.
//

  STATUS_IO_REPARSE_TAG_MISMATCH = NTSTATUS($C0000277);
  {$EXTERNALSYM STATUS_IO_REPARSE_TAG_MISMATCH}

//
// MessageId: STATUS_IO_REPARSE_DATA_INVALID
//
// MessageText:
//
//  The user data passed for the NTFS reparse point is invalid.
//

  STATUS_IO_REPARSE_DATA_INVALID = NTSTATUS($C0000278);
  {$EXTERNALSYM STATUS_IO_REPARSE_DATA_INVALID}

//
// MessageId: STATUS_IO_REPARSE_TAG_NOT_HANDLED
//
// MessageText:
//
//  The layered file system driver for this IO tag did not handle it when needed.
//

  STATUS_IO_REPARSE_TAG_NOT_HANDLED = NTSTATUS($C0000279);
  {$EXTERNALSYM STATUS_IO_REPARSE_TAG_NOT_HANDLED}

//
// MessageId: STATUS_REPARSE_POINT_NOT_RESOLVED
//
// MessageText:
//
//  The NTFS symbolic link could not be resolved even though the initial file name is valid.
//

  STATUS_REPARSE_POINT_NOT_RESOLVED = NTSTATUS($C0000280);
  {$EXTERNALSYM STATUS_REPARSE_POINT_NOT_RESOLVED}

//
// MessageId: STATUS_DIRECTORY_IS_A_REPARSE_POINT
//
// MessageText:
//
//  The NTFS directory is a reparse point.
//

  STATUS_DIRECTORY_IS_A_REPARSE_POINT = NTSTATUS($C0000281);
  {$EXTERNALSYM STATUS_DIRECTORY_IS_A_REPARSE_POINT}

//
// MessageId: STATUS_RANGE_LIST_CONFLICT
//
// MessageText:
//
//  The range could not be added to the range list because of a conflict.
//

  STATUS_RANGE_LIST_CONFLICT = NTSTATUS($C0000282);
  {$EXTERNALSYM STATUS_RANGE_LIST_CONFLICT}

//
// MessageId: STATUS_SOURCE_ELEMENT_EMPTY
//
// MessageText:
//
//  The specified medium changer source element contains no media.
//

  STATUS_SOURCE_ELEMENT_EMPTY = NTSTATUS($C0000283);
  {$EXTERNALSYM STATUS_SOURCE_ELEMENT_EMPTY}

//
// MessageId: STATUS_DESTINATION_ELEMENT_FULL
//
// MessageText:
//
//  The specified medium changer destination element already contains media.
//

  STATUS_DESTINATION_ELEMENT_FULL = NTSTATUS($C0000284);
  {$EXTERNALSYM STATUS_DESTINATION_ELEMENT_FULL}

//
// MessageId: STATUS_ILLEGAL_ELEMENT_ADDRESS
//
// MessageText:
//
//  The specified medium changer element does not exist.
//

  STATUS_ILLEGAL_ELEMENT_ADDRESS = NTSTATUS($C0000285);
  {$EXTERNALSYM STATUS_ILLEGAL_ELEMENT_ADDRESS}

//
// MessageId: STATUS_MAGAZINE_NOT_PRESENT
//
// MessageText:
//
//  The specified element is contained within a magazine that is no longer present.
//

  STATUS_MAGAZINE_NOT_PRESENT = NTSTATUS($C0000286);
  {$EXTERNALSYM STATUS_MAGAZINE_NOT_PRESENT}

//
// MessageId: STATUS_REINITIALIZATION_NEEDED
//
// MessageText:
//
//  The device requires reinitialization due to hardware errors.
//

  STATUS_REINITIALIZATION_NEEDED = NTSTATUS($C0000287);
  {$EXTERNALSYM STATUS_REINITIALIZATION_NEEDED}

//
// MessageId: STATUS_DEVICE_REQUIRES_CLEANING
//
// MessageText:
//
//  The device has indicated that cleaning is necessary.
//

  STATUS_DEVICE_REQUIRES_CLEANING = NTSTATUS($80000288);
  {$EXTERNALSYM STATUS_DEVICE_REQUIRES_CLEANING}

//
// MessageId: STATUS_DEVICE_DOOR_OPEN
//
// MessageText:
//
//  The device has indicated that it's door is open. Further operations require it closed and secured.
//

  STATUS_DEVICE_DOOR_OPEN = NTSTATUS($80000289);
  {$EXTERNALSYM STATUS_DEVICE_DOOR_OPEN}

//
// MessageId: STATUS_ENCRYPTION_FAILED
//
// MessageText:
//
//  The file encryption attempt failed.
//

  STATUS_ENCRYPTION_FAILED = NTSTATUS($C000028A);
  {$EXTERNALSYM STATUS_ENCRYPTION_FAILED}

//
// MessageId: STATUS_DECRYPTION_FAILED
//
// MessageText:
//
//  The file decryption attempt failed.
//

  STATUS_DECRYPTION_FAILED = NTSTATUS($C000028B);
  {$EXTERNALSYM STATUS_DECRYPTION_FAILED}

//
// MessageId: STATUS_RANGE_NOT_FOUND
//
// MessageText:
//
//  The specified range could not be found in the range list.
//

  STATUS_RANGE_NOT_FOUND = NTSTATUS($C000028C);
  {$EXTERNALSYM STATUS_RANGE_NOT_FOUND}

//
// MessageId: STATUS_NO_RECOVERY_POLICY
//
// MessageText:
//
//  There is no encryption recovery policy configured for this system.
//

  STATUS_NO_RECOVERY_POLICY = NTSTATUS($C000028D);
  {$EXTERNALSYM STATUS_NO_RECOVERY_POLICY}

//
// MessageId: STATUS_NO_EFS
//
// MessageText:
//
//  The required encryption driver is not loaded for this system.
//

  STATUS_NO_EFS = NTSTATUS($C000028E);
  {$EXTERNALSYM STATUS_NO_EFS}

//
// MessageId: STATUS_WRONG_EFS
//
// MessageText:
//
//  The file was encrypted with a different encryption driver than is currently loaded.
//

  STATUS_WRONG_EFS = NTSTATUS($C000028F);
  {$EXTERNALSYM STATUS_WRONG_EFS}

//
// MessageId: STATUS_NO_USER_KEYS
//
// MessageText:
//
//  There are no EFS keys defined for the user.
//

  STATUS_NO_USER_KEYS = NTSTATUS($C0000290);
  {$EXTERNALSYM STATUS_NO_USER_KEYS}

//
// MessageId: STATUS_FILE_NOT_ENCRYPTED
//
// MessageText:
//
//  The specified file is not encrypted.
//

  STATUS_FILE_NOT_ENCRYPTED = NTSTATUS($C0000291);
  {$EXTERNALSYM STATUS_FILE_NOT_ENCRYPTED}

//
// MessageId: STATUS_NOT_EXPORT_FORMAT
//
// MessageText:
//
//  The specified file is not in the defined EFS export format.
//

  STATUS_NOT_EXPORT_FORMAT = NTSTATUS($C0000292);
  {$EXTERNALSYM STATUS_NOT_EXPORT_FORMAT}

//
// MessageId: STATUS_FILE_ENCRYPTED
//
// MessageText:
//
//  The specified file is encrypted and the user does not have the ability to decrypt it.
//

  STATUS_FILE_ENCRYPTED = NTSTATUS($C0000293);
  {$EXTERNALSYM STATUS_FILE_ENCRYPTED}

//
// MessageId: STATUS_WAKE_SYSTEM
//
// MessageText:
//
//  The system has awoken
//

  STATUS_WAKE_SYSTEM = NTSTATUS($40000294);
  {$EXTERNALSYM STATUS_WAKE_SYSTEM}

//
// MessageId: STATUS_WMI_GUID_NOT_FOUND
//
// MessageText:
//
//  The guid passed was not recognized as valid by a WMI data provider.
//

  STATUS_WMI_GUID_NOT_FOUND = NTSTATUS($C0000295);
  {$EXTERNALSYM STATUS_WMI_GUID_NOT_FOUND}

//
// MessageId: STATUS_WMI_INSTANCE_NOT_FOUND
//
// MessageText:
//
//  The instance name passed was not recognized as valid by a WMI data provider.
//

  STATUS_WMI_INSTANCE_NOT_FOUND = NTSTATUS($C0000296);
  {$EXTERNALSYM STATUS_WMI_INSTANCE_NOT_FOUND}

//
// MessageId: STATUS_WMI_ITEMID_NOT_FOUND
//
// MessageText:
//
//  The data item id passed was not recognized as valid by a WMI data provider.
//

  STATUS_WMI_ITEMID_NOT_FOUND = NTSTATUS($C0000297);
  {$EXTERNALSYM STATUS_WMI_ITEMID_NOT_FOUND}

//
// MessageId: STATUS_WMI_TRY_AGAIN
//
// MessageText:
//
//  The WMI request could not be completed and should be retried.
//

  STATUS_WMI_TRY_AGAIN = NTSTATUS($C0000298);
  {$EXTERNALSYM STATUS_WMI_TRY_AGAIN}

//
// MessageId: STATUS_SHARED_POLICY
//
// MessageText:
//
//  The policy object is shared and can only be modified at the root
//

  STATUS_SHARED_POLICY = NTSTATUS($C0000299);
  {$EXTERNALSYM STATUS_SHARED_POLICY}

//
// MessageId: STATUS_POLICY_OBJECT_NOT_FOUND
//
// MessageText:
//
//  The policy object does not exist when it should
//

  STATUS_POLICY_OBJECT_NOT_FOUND = NTSTATUS($C000029A);
  {$EXTERNALSYM STATUS_POLICY_OBJECT_NOT_FOUND}

//
// MessageId: STATUS_POLICY_ONLY_IN_DS
//
// MessageText:
//
//  The requested policy information only lives in the Ds
//

  STATUS_POLICY_ONLY_IN_DS = NTSTATUS($C000029B);
  {$EXTERNALSYM STATUS_POLICY_ONLY_IN_DS}

//
// MessageId: STATUS_VOLUME_NOT_UPGRADED
//
// MessageText:
//
//  The volume must be upgraded to enable this feature
//

  STATUS_VOLUME_NOT_UPGRADED = NTSTATUS($C000029C);
  {$EXTERNALSYM STATUS_VOLUME_NOT_UPGRADED}

//
// MessageId: STATUS_REMOTE_STORAGE_NOT_ACTIVE
//
// MessageText:
//
//  The remote storage service is not operational at this time.
//

  STATUS_REMOTE_STORAGE_NOT_ACTIVE = NTSTATUS($C000029D);
  {$EXTERNALSYM STATUS_REMOTE_STORAGE_NOT_ACTIVE}

//
// MessageId: STATUS_REMOTE_STORAGE_MEDIA_ERROR
//
// MessageText:
//
//  The remote storage service encountered a media error.
//

  STATUS_REMOTE_STORAGE_MEDIA_ERROR = NTSTATUS($C000029E);
  {$EXTERNALSYM STATUS_REMOTE_STORAGE_MEDIA_ERROR}

//
// MessageId: STATUS_NO_TRACKING_SERVICE
//
// MessageText:
//
//  The tracking (workstation) service is not running.
//

  STATUS_NO_TRACKING_SERVICE = NTSTATUS($C000029F);
  {$EXTERNALSYM STATUS_NO_TRACKING_SERVICE}

//
// MessageId: STATUS_SERVER_SID_MISMATCH
//
// MessageText:
//
//  The server process is running under a SID different than that required by client.
//

  STATUS_SERVER_SID_MISMATCH = NTSTATUS($C00002A0);
  {$EXTERNALSYM STATUS_SERVER_SID_MISMATCH}

//
// Directory Service specific Errors
//
//
// MessageId: STATUS_DS_NO_ATTRIBUTE_OR_VALUE
//
// MessageText:
//
//  The specified directory service attribute or value does not exist.
//

  STATUS_DS_NO_ATTRIBUTE_OR_VALUE = NTSTATUS($C00002A1);
  {$EXTERNALSYM STATUS_DS_NO_ATTRIBUTE_OR_VALUE}

//
// MessageId: STATUS_DS_INVALID_ATTRIBUTE_SYNTAX
//
// MessageText:
//
//  The attribute syntax specified to the directory service is invalid.
//

  STATUS_DS_INVALID_ATTRIBUTE_SYNTAX = NTSTATUS($C00002A2);
  {$EXTERNALSYM STATUS_DS_INVALID_ATTRIBUTE_SYNTAX}

//
// MessageId: STATUS_DS_ATTRIBUTE_TYPE_UNDEFINED
//
// MessageText:
//
//  The attribute type specified to the directory service is not defined.
//

  STATUS_DS_ATTRIBUTE_TYPE_UNDEFINED = NTSTATUS($C00002A3);
  {$EXTERNALSYM STATUS_DS_ATTRIBUTE_TYPE_UNDEFINED}

//
// MessageId: STATUS_DS_ATTRIBUTE_OR_VALUE_EXISTS
//
// MessageText:
//
//  The specified directory service attribute or value already exists.
//

  STATUS_DS_ATTRIBUTE_OR_VALUE_EXISTS = NTSTATUS($C00002A4);
  {$EXTERNALSYM STATUS_DS_ATTRIBUTE_OR_VALUE_EXISTS}

//
// MessageId: STATUS_DS_BUSY
//
// MessageText:
//
//  The directory service is busy.
//

  STATUS_DS_BUSY = NTSTATUS($C00002A5);
  {$EXTERNALSYM STATUS_DS_BUSY}

//
// MessageId: STATUS_DS_UNAVAILABLE
//
// MessageText:
//
//  The directory service is not available.
//

  STATUS_DS_UNAVAILABLE = NTSTATUS($C00002A6);
  {$EXTERNALSYM STATUS_DS_UNAVAILABLE}

//
// MessageId: STATUS_DS_NO_RIDS_ALLOCATED
//
// MessageText:
//
//  The directory service was unable to allocate a relative identifier.
//

  STATUS_DS_NO_RIDS_ALLOCATED = NTSTATUS($C00002A7);
  {$EXTERNALSYM STATUS_DS_NO_RIDS_ALLOCATED}

//
// MessageId: STATUS_DS_NO_MORE_RIDS
//
// MessageText:
//
//  The directory service has exhausted the pool of relative identifiers.
//

  STATUS_DS_NO_MORE_RIDS = NTSTATUS($C00002A8);
  {$EXTERNALSYM STATUS_DS_NO_MORE_RIDS}

//
// MessageId: STATUS_DS_INCORRECT_ROLE_OWNER
//
// MessageText:
//
//  The requested operation could not be performed because the directory service is not the master for that type of operation.
//

  STATUS_DS_INCORRECT_ROLE_OWNER = NTSTATUS($C00002A9);
  {$EXTERNALSYM STATUS_DS_INCORRECT_ROLE_OWNER}

//
// MessageId: STATUS_DS_RIDMGR_INIT_ERROR
//
// MessageText:
//
//  The directory service was unable to initialize the subsystem that allocates relative identifiers.
//

  STATUS_DS_RIDMGR_INIT_ERROR = NTSTATUS($C00002AA);
  {$EXTERNALSYM STATUS_DS_RIDMGR_INIT_ERROR}

//
// MessageId: STATUS_DS_OBJ_CLASS_VIOLATION
//
// MessageText:
//
//  The requested operation did not satisfy one or more constraints associated with the class of the object.
//

  STATUS_DS_OBJ_CLASS_VIOLATION = NTSTATUS($C00002AB);
  {$EXTERNALSYM STATUS_DS_OBJ_CLASS_VIOLATION}

//
// MessageId: STATUS_DS_CANT_ON_NON_LEAF
//
// MessageText:
//
//  The directory service can perform the requested operation only on a leaf object.
//

  STATUS_DS_CANT_ON_NON_LEAF = NTSTATUS($C00002AC);
  {$EXTERNALSYM STATUS_DS_CANT_ON_NON_LEAF}

//
// MessageId: STATUS_DS_CANT_ON_RDN
//
// MessageText:
//
//  The directory service cannot perform the requested operation on the Relatively Defined Name (RDN) attribute of an object.
//

  STATUS_DS_CANT_ON_RDN = NTSTATUS($C00002AD);
  {$EXTERNALSYM STATUS_DS_CANT_ON_RDN}

//
// MessageId: STATUS_DS_CANT_MOD_OBJ_CLASS
//
// MessageText:
//
//  The directory service detected an attempt to modify the object class of an object.
//

  STATUS_DS_CANT_MOD_OBJ_CLASS = NTSTATUS($C00002AE);
  {$EXTERNALSYM STATUS_DS_CANT_MOD_OBJ_CLASS}

//
// MessageId: STATUS_DS_CROSS_DOM_MOVE_FAILED
//
// MessageText:
//
//  An error occurred while performing a cross domain move operation.
//

  STATUS_DS_CROSS_DOM_MOVE_FAILED = NTSTATUS($C00002AF);
  {$EXTERNALSYM STATUS_DS_CROSS_DOM_MOVE_FAILED}

//
// MessageId: STATUS_DS_GC_NOT_AVAILABLE
//
// MessageText:
//
//  Unable to Contact the Global Catalog Server.
//

  STATUS_DS_GC_NOT_AVAILABLE = NTSTATUS($C00002B0);
  {$EXTERNALSYM STATUS_DS_GC_NOT_AVAILABLE}

//
// MessageId: STATUS_DIRECTORY_SERVICE_REQUIRED
//
// MessageText:
//
//  The requested operation requires a directory service, and none was available.
//

  STATUS_DIRECTORY_SERVICE_REQUIRED = NTSTATUS($C00002B1);
  {$EXTERNALSYM STATUS_DIRECTORY_SERVICE_REQUIRED}

//
// MessageId: STATUS_REPARSE_ATTRIBUTE_CONFLICT
//
// MessageText:
//
//  The reparse attribute cannot be set as it is incompatible with an existing attribute.
//

  STATUS_REPARSE_ATTRIBUTE_CONFLICT = NTSTATUS($C00002B2);
  {$EXTERNALSYM STATUS_REPARSE_ATTRIBUTE_CONFLICT}

//
// MessageId: STATUS_CANT_ENABLE_DENY_ONLY
//
// MessageText:
//
//  A group marked use for deny only  can not be enabled.
//

  STATUS_CANT_ENABLE_DENY_ONLY = NTSTATUS($C00002B3);
  {$EXTERNALSYM STATUS_CANT_ENABLE_DENY_ONLY}

//
// MessageId: STATUS_FLOAT_MULTIPLE_FAULTS
//
// MessageText:
//
//  {EXCEPTION}
//  Multiple floating point faults.
//

  STATUS_FLOAT_MULTIPLE_FAULTS = NTSTATUS($C00002B4); // winnt
  {$EXTERNALSYM STATUS_FLOAT_MULTIPLE_FAULTS}

//
// MessageId: STATUS_FLOAT_MULTIPLE_TRAPS
//
// MessageText:
//
//  {EXCEPTION}
//  Multiple floating point traps.
//

  STATUS_FLOAT_MULTIPLE_TRAPS = NTSTATUS($C00002B5); // winnt
  {$EXTERNALSYM STATUS_FLOAT_MULTIPLE_TRAPS}

//
// MessageId: STATUS_DEVICE_REMOVED
//
// MessageText:
//
//  The device has been removed.
//

  STATUS_DEVICE_REMOVED = NTSTATUS($C00002B6);
  {$EXTERNALSYM STATUS_DEVICE_REMOVED}

//
// MessageId: STATUS_JOURNAL_DELETE_IN_PROGRESS
//
// MessageText:
//
//  The volume change journal is being deleted.
//

  STATUS_JOURNAL_DELETE_IN_PROGRESS = NTSTATUS($C00002B7);
  {$EXTERNALSYM STATUS_JOURNAL_DELETE_IN_PROGRESS}

//
// MessageId: STATUS_JOURNAL_NOT_ACTIVE
//
// MessageText:
//
//  The volume change journal service is not active.
//

  STATUS_JOURNAL_NOT_ACTIVE = NTSTATUS($C00002B8);
  {$EXTERNALSYM STATUS_JOURNAL_NOT_ACTIVE}

//
// MessageId: STATUS_NOINTERFACE
//
// MessageText:
//
//  The requested interface is not supported.
//

  STATUS_NOINTERFACE = NTSTATUS($C00002B9);
  {$EXTERNALSYM STATUS_NOINTERFACE}

//
// MessageId: STATUS_DS_ADMIN_LIMIT_EXCEEDED
//
// MessageText:
//
//  A directory service resource limit has been exceeded.
//

  STATUS_DS_ADMIN_LIMIT_EXCEEDED = NTSTATUS($C00002C1);
  {$EXTERNALSYM STATUS_DS_ADMIN_LIMIT_EXCEEDED}

//
// MessageId: STATUS_DRIVER_FAILED_SLEEP
//
// MessageText:
//
//  {System Standby Failed}
//  The driver %hs does not support standby mode. Updating this
//  driver may allow the system to go to standby mode.  
//

  STATUS_DRIVER_FAILED_SLEEP = NTSTATUS($C00002C2);
  {$EXTERNALSYM STATUS_DRIVER_FAILED_SLEEP}

//
// MessageId: STATUS_MUTUAL_AUTHENTICATION_FAILED
//
// MessageText:
//
//  Mutual Authentication failed. The server's password is out of date at the domain controller.
//

  STATUS_MUTUAL_AUTHENTICATION_FAILED = NTSTATUS($C00002C3);
  {$EXTERNALSYM STATUS_MUTUAL_AUTHENTICATION_FAILED}

//
// MessageId: STATUS_CORRUPT_SYSTEM_FILE
//
// MessageText:
//
//  The system file %1 has become corrupt and has been replaced.
//

  STATUS_CORRUPT_SYSTEM_FILE = NTSTATUS($C00002C4);
  {$EXTERNALSYM STATUS_CORRUPT_SYSTEM_FILE}

//
// MessageId: STATUS_DATATYPE_MISALIGNMENT_ERROR
//
// MessageText:
//
//  {EXCEPTION}
//  Alignment Error
//  A datatype misalignment error was detected in a load or store instruction.
//

  STATUS_DATATYPE_MISALIGNMENT_ERROR = NTSTATUS($C00002C5);
  {$EXTERNALSYM STATUS_DATATYPE_MISALIGNMENT_ERROR}

//
// MessageId: STATUS_WMI_READ_ONLY
//
// MessageText:
//
//  The WMI data item or data block is read only.
//

  STATUS_WMI_READ_ONLY = NTSTATUS($C00002C6);
  {$EXTERNALSYM STATUS_WMI_READ_ONLY}

//
// MessageId: STATUS_WMI_SET_FAILURE
//
// MessageText:
//
//  The WMI data item or data block could not be changed.
//

  STATUS_WMI_SET_FAILURE = NTSTATUS($C00002C7);
  {$EXTERNALSYM STATUS_WMI_SET_FAILURE}

//
// MessageId: STATUS_COMMITMENT_MINIMUM
//
// MessageText:
//
//  {Virtual Memory Minimum Too Low}
//  Your system is low on virtual memory. Windows is increasing the size of your virtual memory paging file. 
//  During this process, memory requests for some applications may be denied. For more information, see Help.
//

  STATUS_COMMITMENT_MINIMUM = NTSTATUS($C00002C8);
  {$EXTERNALSYM STATUS_COMMITMENT_MINIMUM}

//
// MessageId: STATUS_REG_NAT_CONSUMPTION
//
// MessageText:
//
//  {EXCEPTION}
//  Register NaT consumption faults.
//  A NaT value is consumed on a non speculative instruction.
//

  STATUS_REG_NAT_CONSUMPTION = NTSTATUS($C00002C9); // winnt
  {$EXTERNALSYM STATUS_REG_NAT_CONSUMPTION}

//
// MessageId: STATUS_TRANSPORT_FULL
//
// MessageText:
//
//  The medium changer's transport element contains media, which is causing the operation to fail.
//

  STATUS_TRANSPORT_FULL = NTSTATUS($C00002CA);
  {$EXTERNALSYM STATUS_TRANSPORT_FULL}

//
// MessageId: STATUS_DS_SAM_INIT_FAILURE
//
// MessageText:
//
//  Security Accounts Manager initialization failed because of the following error:
//  %hs
//  Error Status: 0x%x.
//  Please click OK to shutdown this system and reboot into Directory Services Restore Mode, check the event log for more detailed information.
//

  STATUS_DS_SAM_INIT_FAILURE = NTSTATUS($C00002CB);
  {$EXTERNALSYM STATUS_DS_SAM_INIT_FAILURE}

//
// MessageId: STATUS_ONLY_IF_CONNECTED
//
// MessageText:
//
//  This operation is supported only when you are connected to the server.
//

  STATUS_ONLY_IF_CONNECTED = NTSTATUS($C00002CC);
  {$EXTERNALSYM STATUS_ONLY_IF_CONNECTED}

//
// MessageId: STATUS_DS_SENSITIVE_GROUP_VIOLATION
//
// MessageText:
//
//  Only an administrator can modify the membership list of an administrative group.
//

  STATUS_DS_SENSITIVE_GROUP_VIOLATION = NTSTATUS($C00002CD);
  {$EXTERNALSYM STATUS_DS_SENSITIVE_GROUP_VIOLATION}

//
// MessageId: STATUS_PNP_RESTART_ENUMERATION
//
// MessageText:
//
//  A device was removed so enumeration must be restarted.
//

  STATUS_PNP_RESTART_ENUMERATION = NTSTATUS($C00002CE);
  {$EXTERNALSYM STATUS_PNP_RESTART_ENUMERATION}

//
// MessageId: STATUS_JOURNAL_ENTRY_DELETED
//
// MessageText:
//
//  The journal entry has been deleted from the journal.
//

  STATUS_JOURNAL_ENTRY_DELETED = NTSTATUS($C00002CF);
  {$EXTERNALSYM STATUS_JOURNAL_ENTRY_DELETED}

//
// MessageId: STATUS_DS_CANT_MOD_PRIMARYGROUPID
//
// MessageText:
//
//  Cannot change the primary group ID of a domain controller account.
//

  STATUS_DS_CANT_MOD_PRIMARYGROUPID = NTSTATUS($C00002D0);
  {$EXTERNALSYM STATUS_DS_CANT_MOD_PRIMARYGROUPID}

//
// MessageId: STATUS_SYSTEM_IMAGE_BAD_SIGNATURE
//
// MessageText:
//
//  {Fatal System Error}
//  The system image %s is not properly signed.
//  The file has been replaced with the signed file.
//  The system has been shut down.
//

  STATUS_SYSTEM_IMAGE_BAD_SIGNATURE = NTSTATUS($C00002D1);
  {$EXTERNALSYM STATUS_SYSTEM_IMAGE_BAD_SIGNATURE}

//
// MessageId: STATUS_PNP_REBOOT_REQUIRED
//
// MessageText:
//
//  Device will not start without a reboot.
//

  STATUS_PNP_REBOOT_REQUIRED = NTSTATUS($C00002D2);
  {$EXTERNALSYM STATUS_PNP_REBOOT_REQUIRED}

//
// MessageId: STATUS_POWER_STATE_INVALID
//
// MessageText:
//
//  Current device power state cannot support this request.
//

  STATUS_POWER_STATE_INVALID = NTSTATUS($C00002D3);
  {$EXTERNALSYM STATUS_POWER_STATE_INVALID}

//
// MessageId: STATUS_DS_INVALID_GROUP_TYPE
//
// MessageText:
//
//  The specified group type is invalid.
//

  STATUS_DS_INVALID_GROUP_TYPE = NTSTATUS($C00002D4);
  {$EXTERNALSYM STATUS_DS_INVALID_GROUP_TYPE}

//
// MessageId: STATUS_DS_NO_NEST_GLOBALGROUP_IN_MIXEDDOMAIN
//
// MessageText:
//
//  In mixed domain no nesting of global group if group is security enabled.
//

  STATUS_DS_NO_NEST_GLOBALGROUP_IN_MIXEDDOMAIN = NTSTATUS($C00002D5);
  {$EXTERNALSYM STATUS_DS_NO_NEST_GLOBALGROUP_IN_MIXEDDOMAIN}

//
// MessageId: STATUS_DS_NO_NEST_LOCALGROUP_IN_MIXEDDOMAIN
//
// MessageText:
//
//  In mixed domain, cannot nest local groups with other local groups, if the group is security enabled.
//

  STATUS_DS_NO_NEST_LOCALGROUP_IN_MIXEDDOMAIN = NTSTATUS($C00002D6);
  {$EXTERNALSYM STATUS_DS_NO_NEST_LOCALGROUP_IN_MIXEDDOMAIN}

//
// MessageId: STATUS_DS_GLOBAL_CANT_HAVE_LOCAL_MEMBER
//
// MessageText:
//
//  A global group cannot have a local group as a member.
//

  STATUS_DS_GLOBAL_CANT_HAVE_LOCAL_MEMBER = NTSTATUS($C00002D7);
  {$EXTERNALSYM STATUS_DS_GLOBAL_CANT_HAVE_LOCAL_MEMBER}

//
// MessageId: STATUS_DS_GLOBAL_CANT_HAVE_UNIVERSAL_MEMBER
//
// MessageText:
//
//  A global group cannot have a universal group as a member.
//

  STATUS_DS_GLOBAL_CANT_HAVE_UNIVERSAL_MEMBER = NTSTATUS($C00002D8);
  {$EXTERNALSYM STATUS_DS_GLOBAL_CANT_HAVE_UNIVERSAL_MEMBER}

//
// MessageId: STATUS_DS_UNIVERSAL_CANT_HAVE_LOCAL_MEMBER
//
// MessageText:
//
//  A universal group cannot have a local group as a member.
//

  STATUS_DS_UNIVERSAL_CANT_HAVE_LOCAL_MEMBER = NTSTATUS($C00002D9);
  {$EXTERNALSYM STATUS_DS_UNIVERSAL_CANT_HAVE_LOCAL_MEMBER}

//
// MessageId: STATUS_DS_GLOBAL_CANT_HAVE_CROSSDOMAIN_MEMBER
//
// MessageText:
//
//  A global group cannot have a cross domain member.
//

  STATUS_DS_GLOBAL_CANT_HAVE_CROSSDOMAIN_MEMBER = NTSTATUS($C00002DA);
  {$EXTERNALSYM STATUS_DS_GLOBAL_CANT_HAVE_CROSSDOMAIN_MEMBER}

//
// MessageId: STATUS_DS_LOCAL_CANT_HAVE_CROSSDOMAIN_LOCAL_MEMBER
//
// MessageText:
//
//  A local group cannot have another cross domain local group as a member.
//

  STATUS_DS_LOCAL_CANT_HAVE_CROSSDOMAIN_LOCAL_MEMBER = NTSTATUS($C00002DB);
  {$EXTERNALSYM STATUS_DS_LOCAL_CANT_HAVE_CROSSDOMAIN_LOCAL_MEMBER}

//
// MessageId: STATUS_DS_HAVE_PRIMARY_MEMBERS
//
// MessageText:
//
//  Can not change to security disabled group because of having primary members in this group.
//

  STATUS_DS_HAVE_PRIMARY_MEMBERS = NTSTATUS($C00002DC);
  {$EXTERNALSYM STATUS_DS_HAVE_PRIMARY_MEMBERS}

//
// MessageId: STATUS_WMI_NOT_SUPPORTED
//
// MessageText:
//
//  The WMI operation is not supported by the data block or method.
//

  STATUS_WMI_NOT_SUPPORTED = NTSTATUS($C00002DD);
  {$EXTERNALSYM STATUS_WMI_NOT_SUPPORTED}

//
// MessageId: STATUS_INSUFFICIENT_POWER
//
// MessageText:
//
//  There is not enough power to complete the requested operation.
//

  STATUS_INSUFFICIENT_POWER = NTSTATUS($C00002DE);
  {$EXTERNALSYM STATUS_INSUFFICIENT_POWER}

//
// MessageId: STATUS_SAM_NEED_BOOTKEY_PASSWORD
//
// MessageText:
//
//  Security Account Manager needs to get the boot password.
//

  STATUS_SAM_NEED_BOOTKEY_PASSWORD = NTSTATUS($C00002DF);
  {$EXTERNALSYM STATUS_SAM_NEED_BOOTKEY_PASSWORD}

//
// MessageId: STATUS_SAM_NEED_BOOTKEY_FLOPPY
//
// MessageText:
//
//  Security Account Manager needs to get the boot key from floppy disk.
//

  STATUS_SAM_NEED_BOOTKEY_FLOPPY = NTSTATUS($C00002E0);
  {$EXTERNALSYM STATUS_SAM_NEED_BOOTKEY_FLOPPY}

//
// MessageId: STATUS_DS_CANT_START
//
// MessageText:
//
//  Directory Service can not start.
//

  STATUS_DS_CANT_START = NTSTATUS($C00002E1);
  {$EXTERNALSYM STATUS_DS_CANT_START}

//
// MessageId: STATUS_DS_INIT_FAILURE
//
// MessageText:
//
//  Directory Services could not start because of the following error:
//  %hs
//  Error Status: 0x%x.
//  Please click OK to shutdown this system and reboot into Directory Services Restore Mode, check the event log for more detailed information.
//

  STATUS_DS_INIT_FAILURE = NTSTATUS($C00002E2);
  {$EXTERNALSYM STATUS_DS_INIT_FAILURE}

//
// MessageId: STATUS_SAM_INIT_FAILURE
//
// MessageText:
//
//  Security Accounts Manager initialization failed because of the following error:
//  %hs
//  Error Status: 0x%x.
//  Please click OK to shutdown this system and reboot into Safe Mode, check the event log for more detailed information.
//

  STATUS_SAM_INIT_FAILURE = NTSTATUS($C00002E3);
  {$EXTERNALSYM STATUS_SAM_INIT_FAILURE}

//
// MessageId: STATUS_DS_GC_REQUIRED
//
// MessageText:
//
//  The requested operation can be performed only on a global catalog server.
//

  STATUS_DS_GC_REQUIRED = NTSTATUS($C00002E4);
  {$EXTERNALSYM STATUS_DS_GC_REQUIRED}

//
// MessageId: STATUS_DS_LOCAL_MEMBER_OF_LOCAL_ONLY
//
// MessageText:
//
//  A local group can only be a member of other local groups in the same domain.
//

  STATUS_DS_LOCAL_MEMBER_OF_LOCAL_ONLY = NTSTATUS($C00002E5);
  {$EXTERNALSYM STATUS_DS_LOCAL_MEMBER_OF_LOCAL_ONLY}

//
// MessageId: STATUS_DS_NO_FPO_IN_UNIVERSAL_GROUPS
//
// MessageText:
//
//  Foreign security principals cannot be members of universal groups.
//

  STATUS_DS_NO_FPO_IN_UNIVERSAL_GROUPS = NTSTATUS($C00002E6);
  {$EXTERNALSYM STATUS_DS_NO_FPO_IN_UNIVERSAL_GROUPS}

//
// MessageId: STATUS_DS_MACHINE_ACCOUNT_QUOTA_EXCEEDED
//
// MessageText:
//
//  Your computer could not be joined to the domain. You have exceeded the maximum number of computer accounts you are allowed to create in this domain. Contact your system administrator to have this limit reset or increased.
//

  STATUS_DS_MACHINE_ACCOUNT_QUOTA_EXCEEDED = NTSTATUS($C00002E7);
  {$EXTERNALSYM STATUS_DS_MACHINE_ACCOUNT_QUOTA_EXCEEDED}

//
// MessageId: STATUS_MULTIPLE_FAULT_VIOLATION
//
// MessageText:
//
//  STATUS_MULTIPLE_FAULT_VIOLATION
//

  STATUS_MULTIPLE_FAULT_VIOLATION = NTSTATUS($C00002E8);
  {$EXTERNALSYM STATUS_MULTIPLE_FAULT_VIOLATION}

//
// MessageId: STATUS_NOT_SUPPORTED_ON_SBS
//
// MessageText:
//
//  This operation is not supported on a Microsoft Small Business Server
//

  STATUS_NOT_SUPPORTED_ON_SBS = NTSTATUS($C0000300);
  {$EXTERNALSYM STATUS_NOT_SUPPORTED_ON_SBS}

//
// MessageId: STATUS_WOW_ASSERTION
//
// MessageText:
//
//  WOW Assertion Error.
//

  STATUS_WOW_ASSERTION = NTSTATUS($C0009898);
  {$EXTERNALSYM STATUS_WOW_ASSERTION}

//
// MessageId: DBG_NO_STATE_CHANGE
//
// MessageText:
//
//  Debugger did not perform a state change.
//

  DBG_NO_STATE_CHANGE = NTSTATUS($C0010001);
  {$EXTERNALSYM DBG_NO_STATE_CHANGE}

//
// MessageId: DBG_APP_NOT_IDLE
//
// MessageText:
//
//  Debugger has found the application is not idle.
//

  DBG_APP_NOT_IDLE = NTSTATUS($C0010002);
  {$EXTERNALSYM DBG_APP_NOT_IDLE}

//
// MessageId: RPC_NT_INVALID_STRING_BINDING
//
// MessageText:
//
//  The string binding is invalid.
//

  RPC_NT_INVALID_STRING_BINDING = NTSTATUS($C0020001);
  {$EXTERNALSYM RPC_NT_INVALID_STRING_BINDING}

//
// MessageId: RPC_NT_WRONG_KIND_OF_BINDING
//
// MessageText:
//
//  The binding handle is not the correct type.
//

  RPC_NT_WRONG_KIND_OF_BINDING = NTSTATUS($C0020002);
  {$EXTERNALSYM RPC_NT_WRONG_KIND_OF_BINDING}

//
// MessageId: RPC_NT_INVALID_BINDING
//
// MessageText:
//
//  The binding handle is invalid.
//

  RPC_NT_INVALID_BINDING = NTSTATUS($C0020003);
  {$EXTERNALSYM RPC_NT_INVALID_BINDING}

//
// MessageId: RPC_NT_PROTSEQ_NOT_SUPPORTED
//
// MessageText:
//
//  The RPC protocol sequence is not supported.
//

  RPC_NT_PROTSEQ_NOT_SUPPORTED = NTSTATUS($C0020004);
  {$EXTERNALSYM RPC_NT_PROTSEQ_NOT_SUPPORTED}

//
// MessageId: RPC_NT_INVALID_RPC_PROTSEQ
//
// MessageText:
//
//  The RPC protocol sequence is invalid.
//

  RPC_NT_INVALID_RPC_PROTSEQ = NTSTATUS($C0020005);
  {$EXTERNALSYM RPC_NT_INVALID_RPC_PROTSEQ}

//
// MessageId: RPC_NT_INVALID_STRING_UUID
//
// MessageText:
//
//  The string UUID is invalid.
//

  RPC_NT_INVALID_STRING_UUID = NTSTATUS($C0020006);
  {$EXTERNALSYM RPC_NT_INVALID_STRING_UUID}

//
// MessageId: RPC_NT_INVALID_ENDPOINT_FORMAT
//
// MessageText:
//
//  The endpoint format is invalid.
//

  RPC_NT_INVALID_ENDPOINT_FORMAT = NTSTATUS($C0020007);
  {$EXTERNALSYM RPC_NT_INVALID_ENDPOINT_FORMAT}

//
// MessageId: RPC_NT_INVALID_NET_ADDR
//
// MessageText:
//
//  The network address is invalid.
//

  RPC_NT_INVALID_NET_ADDR = NTSTATUS($C0020008);
  {$EXTERNALSYM RPC_NT_INVALID_NET_ADDR}

//
// MessageId: RPC_NT_NO_ENDPOINT_FOUND
//
// MessageText:
//
//  No endpoint was found.
//

  RPC_NT_NO_ENDPOINT_FOUND = NTSTATUS($C0020009);
  {$EXTERNALSYM RPC_NT_NO_ENDPOINT_FOUND}

//
// MessageId: RPC_NT_INVALID_TIMEOUT
//
// MessageText:
//
//  The timeout value is invalid.
//

  RPC_NT_INVALID_TIMEOUT = NTSTATUS($C002000A);
  {$EXTERNALSYM RPC_NT_INVALID_TIMEOUT}

//
// MessageId: RPC_NT_OBJECT_NOT_FOUND
//
// MessageText:
//
//  The object UUID was not found.
//

  RPC_NT_OBJECT_NOT_FOUND = NTSTATUS($C002000B);
  {$EXTERNALSYM RPC_NT_OBJECT_NOT_FOUND}

//
// MessageId: RPC_NT_ALREADY_REGISTERED
//
// MessageText:
//
//  The object UUID has already been registered.
//

  RPC_NT_ALREADY_REGISTERED = NTSTATUS($C002000C);
  {$EXTERNALSYM RPC_NT_ALREADY_REGISTERED}

//
// MessageId: RPC_NT_TYPE_ALREADY_REGISTERED
//
// MessageText:
//
//  The type UUID has already been registered.
//

  RPC_NT_TYPE_ALREADY_REGISTERED = NTSTATUS($C002000D);
  {$EXTERNALSYM RPC_NT_TYPE_ALREADY_REGISTERED}

//
// MessageId: RPC_NT_ALREADY_LISTENING
//
// MessageText:
//
//  The RPC server is already listening.
//

  RPC_NT_ALREADY_LISTENING = NTSTATUS($C002000E);
  {$EXTERNALSYM RPC_NT_ALREADY_LISTENING}

//
// MessageId: RPC_NT_NO_PROTSEQS_REGISTERED
//
// MessageText:
//
//  No protocol sequences have been registered.
//

  RPC_NT_NO_PROTSEQS_REGISTERED = NTSTATUS($C002000F);
  {$EXTERNALSYM RPC_NT_NO_PROTSEQS_REGISTERED}

//
// MessageId: RPC_NT_NOT_LISTENING
//
// MessageText:
//
//  The RPC server is not listening.
//

  RPC_NT_NOT_LISTENING = NTSTATUS($C0020010);
  {$EXTERNALSYM RPC_NT_NOT_LISTENING}

//
// MessageId: RPC_NT_UNKNOWN_MGR_TYPE
//
// MessageText:
//
//  The manager type is unknown.
//

  RPC_NT_UNKNOWN_MGR_TYPE = NTSTATUS($C0020011);
  {$EXTERNALSYM RPC_NT_UNKNOWN_MGR_TYPE}

//
// MessageId: RPC_NT_UNKNOWN_IF
//
// MessageText:
//
//  The interface is unknown.
//

  RPC_NT_UNKNOWN_IF = NTSTATUS($C0020012);
  {$EXTERNALSYM RPC_NT_UNKNOWN_IF}

//
// MessageId: RPC_NT_NO_BINDINGS
//
// MessageText:
//
//  There are no bindings.
//

  RPC_NT_NO_BINDINGS = NTSTATUS($C0020013);
  {$EXTERNALSYM RPC_NT_NO_BINDINGS}

//
// MessageId: RPC_NT_NO_PROTSEQS
//
// MessageText:
//
//  There are no protocol sequences.
//

  RPC_NT_NO_PROTSEQS = NTSTATUS($C0020014);
  {$EXTERNALSYM RPC_NT_NO_PROTSEQS}

//
// MessageId: RPC_NT_CANT_CREATE_ENDPOINT
//
// MessageText:
//
//  The endpoint cannot be created.
//

  RPC_NT_CANT_CREATE_ENDPOINT = NTSTATUS($C0020015);
  {$EXTERNALSYM RPC_NT_CANT_CREATE_ENDPOINT}

//
// MessageId: RPC_NT_OUT_OF_RESOURCES
//
// MessageText:
//
//  Not enough resources are available to complete this operation.
//

  RPC_NT_OUT_OF_RESOURCES = NTSTATUS($C0020016);
  {$EXTERNALSYM RPC_NT_OUT_OF_RESOURCES}

//
// MessageId: RPC_NT_SERVER_UNAVAILABLE
//
// MessageText:
//
//  The RPC server is unavailable.
//

  RPC_NT_SERVER_UNAVAILABLE = NTSTATUS($C0020017);
  {$EXTERNALSYM RPC_NT_SERVER_UNAVAILABLE}

//
// MessageId: RPC_NT_SERVER_TOO_BUSY
//
// MessageText:
//
//  The RPC server is too busy to complete this operation.
//

  RPC_NT_SERVER_TOO_BUSY = NTSTATUS($C0020018);
  {$EXTERNALSYM RPC_NT_SERVER_TOO_BUSY}

//
// MessageId: RPC_NT_INVALID_NETWORK_OPTIONS
//
// MessageText:
//
//  The network options are invalid.
//

  RPC_NT_INVALID_NETWORK_OPTIONS = NTSTATUS($C0020019);
  {$EXTERNALSYM RPC_NT_INVALID_NETWORK_OPTIONS}

//
// MessageId: RPC_NT_NO_CALL_ACTIVE
//
// MessageText:
//
//  There are no remote procedure calls active on this thread.
//

  RPC_NT_NO_CALL_ACTIVE = NTSTATUS($C002001A);
  {$EXTERNALSYM RPC_NT_NO_CALL_ACTIVE}

//
// MessageId: RPC_NT_CALL_FAILED
//
// MessageText:
//
//  The remote procedure call failed.
//

  RPC_NT_CALL_FAILED = NTSTATUS($C002001B);
  {$EXTERNALSYM RPC_NT_CALL_FAILED}

//
// MessageId: RPC_NT_CALL_FAILED_DNE
//
// MessageText:
//
//  The remote procedure call failed and did not execute.
//

  RPC_NT_CALL_FAILED_DNE = NTSTATUS($C002001C);
  {$EXTERNALSYM RPC_NT_CALL_FAILED_DNE}

//
// MessageId: RPC_NT_PROTOCOL_ERROR
//
// MessageText:
//
//  An RPC protocol error occurred.
//

  RPC_NT_PROTOCOL_ERROR = NTSTATUS($C002001D);
  {$EXTERNALSYM RPC_NT_PROTOCOL_ERROR}

//
// MessageId: RPC_NT_UNSUPPORTED_TRANS_SYN
//
// MessageText:
//
//  The transfer syntax is not supported by the RPC server.
//

  RPC_NT_UNSUPPORTED_TRANS_SYN = NTSTATUS($C002001F);
  {$EXTERNALSYM RPC_NT_UNSUPPORTED_TRANS_SYN}

//
// MessageId: RPC_NT_UNSUPPORTED_TYPE
//
// MessageText:
//
//  The type UUID is not supported.
//

  RPC_NT_UNSUPPORTED_TYPE = NTSTATUS($C0020021);
  {$EXTERNALSYM RPC_NT_UNSUPPORTED_TYPE}

//
// MessageId: RPC_NT_INVALID_TAG
//
// MessageText:
//
//  The tag is invalid.
//

  RPC_NT_INVALID_TAG = NTSTATUS($C0020022);
  {$EXTERNALSYM RPC_NT_INVALID_TAG}

//
// MessageId: RPC_NT_INVALID_BOUND
//
// MessageText:
//
//  The array bounds are invalid.
//

  RPC_NT_INVALID_BOUND = NTSTATUS($C0020023);
  {$EXTERNALSYM RPC_NT_INVALID_BOUND}

//
// MessageId: RPC_NT_NO_ENTRY_NAME
//
// MessageText:
//
//  The binding does not contain an entry name.
//

  RPC_NT_NO_ENTRY_NAME = NTSTATUS($C0020024);
  {$EXTERNALSYM RPC_NT_NO_ENTRY_NAME}

//
// MessageId: RPC_NT_INVALID_NAME_SYNTAX
//
// MessageText:
//
//  The name syntax is invalid.
//

  RPC_NT_INVALID_NAME_SYNTAX = NTSTATUS($C0020025);
  {$EXTERNALSYM RPC_NT_INVALID_NAME_SYNTAX}

//
// MessageId: RPC_NT_UNSUPPORTED_NAME_SYNTAX
//
// MessageText:
//
//  The name syntax is not supported.
//

  RPC_NT_UNSUPPORTED_NAME_SYNTAX = NTSTATUS($C0020026);
  {$EXTERNALSYM RPC_NT_UNSUPPORTED_NAME_SYNTAX}

//
// MessageId: RPC_NT_UUID_NO_ADDRESS
//
// MessageText:
//
//  No network address is available to use to construct a UUID.
//

  RPC_NT_UUID_NO_ADDRESS = NTSTATUS($C0020028);
  {$EXTERNALSYM RPC_NT_UUID_NO_ADDRESS}

//
// MessageId: RPC_NT_DUPLICATE_ENDPOINT
//
// MessageText:
//
//  The endpoint is a duplicate.
//

  RPC_NT_DUPLICATE_ENDPOINT = NTSTATUS($C0020029);
  {$EXTERNALSYM RPC_NT_DUPLICATE_ENDPOINT}

//
// MessageId: RPC_NT_UNKNOWN_AUTHN_TYPE
//
// MessageText:
//
//  The authentication type is unknown.
//

  RPC_NT_UNKNOWN_AUTHN_TYPE = NTSTATUS($C002002A);
  {$EXTERNALSYM RPC_NT_UNKNOWN_AUTHN_TYPE}

//
// MessageId: RPC_NT_MAX_CALLS_TOO_SMALL
//
// MessageText:
//
//  The maximum number of calls is too small.
//

  RPC_NT_MAX_CALLS_TOO_SMALL = NTSTATUS($C002002B);
  {$EXTERNALSYM RPC_NT_MAX_CALLS_TOO_SMALL}

//
// MessageId: RPC_NT_STRING_TOO_LONG
//
// MessageText:
//
//  The string is too long.
//

  RPC_NT_STRING_TOO_LONG = NTSTATUS($C002002C);
  {$EXTERNALSYM RPC_NT_STRING_TOO_LONG}

//
// MessageId: RPC_NT_PROTSEQ_NOT_FOUND
//
// MessageText:
//
//  The RPC protocol sequence was not found.
//

  RPC_NT_PROTSEQ_NOT_FOUND = NTSTATUS($C002002D);
  {$EXTERNALSYM RPC_NT_PROTSEQ_NOT_FOUND}

//
// MessageId: RPC_NT_PROCNUM_OUT_OF_RANGE
//
// MessageText:
//
//  The procedure number is out of range.
//

  RPC_NT_PROCNUM_OUT_OF_RANGE = NTSTATUS($C002002E);
  {$EXTERNALSYM RPC_NT_PROCNUM_OUT_OF_RANGE}

//
// MessageId: RPC_NT_BINDING_HAS_NO_AUTH
//
// MessageText:
//
//  The binding does not contain any authentication information.
//

  RPC_NT_BINDING_HAS_NO_AUTH = NTSTATUS($C002002F);
  {$EXTERNALSYM RPC_NT_BINDING_HAS_NO_AUTH}

//
// MessageId: RPC_NT_UNKNOWN_AUTHN_SERVICE
//
// MessageText:
//
//  The authentication service is unknown.
//

  RPC_NT_UNKNOWN_AUTHN_SERVICE = NTSTATUS($C0020030);
  {$EXTERNALSYM RPC_NT_UNKNOWN_AUTHN_SERVICE}

//
// MessageId: RPC_NT_UNKNOWN_AUTHN_LEVEL
//
// MessageText:
//
//  The authentication level is unknown.
//

  RPC_NT_UNKNOWN_AUTHN_LEVEL = NTSTATUS($C0020031);
  {$EXTERNALSYM RPC_NT_UNKNOWN_AUTHN_LEVEL}

//
// MessageId: RPC_NT_INVALID_AUTH_IDENTITY
//
// MessageText:
//
//  The security context is invalid.
//

  RPC_NT_INVALID_AUTH_IDENTITY = NTSTATUS($C0020032);
  {$EXTERNALSYM RPC_NT_INVALID_AUTH_IDENTITY}

//
// MessageId: RPC_NT_UNKNOWN_AUTHZ_SERVICE
//
// MessageText:
//
//  The authorization service is unknown.
//

  RPC_NT_UNKNOWN_AUTHZ_SERVICE = NTSTATUS($C0020033);
  {$EXTERNALSYM RPC_NT_UNKNOWN_AUTHZ_SERVICE}

//
// MessageId: EPT_NT_INVALID_ENTRY
//
// MessageText:
//
//  The entry is invalid.
//

  EPT_NT_INVALID_ENTRY = NTSTATUS($C0020034);
  {$EXTERNALSYM EPT_NT_INVALID_ENTRY}

//
// MessageId: EPT_NT_CANT_PERFORM_OP
//
// MessageText:
//
//  The operation cannot be performed.
//

  EPT_NT_CANT_PERFORM_OP = NTSTATUS($C0020035);
  {$EXTERNALSYM EPT_NT_CANT_PERFORM_OP}

//
// MessageId: EPT_NT_NOT_REGISTERED
//
// MessageText:
//
//  There are no more endpoints available from the endpoint mapper.
//

  EPT_NT_NOT_REGISTERED = NTSTATUS($C0020036);
  {$EXTERNALSYM EPT_NT_NOT_REGISTERED}

//
// MessageId: RPC_NT_NOTHING_TO_EXPORT
//
// MessageText:
//
//  No interfaces have been exported.
//

  RPC_NT_NOTHING_TO_EXPORT = NTSTATUS($C0020037);
  {$EXTERNALSYM RPC_NT_NOTHING_TO_EXPORT}

//
// MessageId: RPC_NT_INCOMPLETE_NAME
//
// MessageText:
//
//  The entry name is incomplete.
//

  RPC_NT_INCOMPLETE_NAME = NTSTATUS($C0020038);
  {$EXTERNALSYM RPC_NT_INCOMPLETE_NAME}

//
// MessageId: RPC_NT_INVALID_VERS_OPTION
//
// MessageText:
//
//  The version option is invalid.
//

  RPC_NT_INVALID_VERS_OPTION = NTSTATUS($C0020039);
  {$EXTERNALSYM RPC_NT_INVALID_VERS_OPTION}

//
// MessageId: RPC_NT_NO_MORE_MEMBERS
//
// MessageText:
//
//  There are no more members.
//

  RPC_NT_NO_MORE_MEMBERS = NTSTATUS($C002003A);
  {$EXTERNALSYM RPC_NT_NO_MORE_MEMBERS}

//
// MessageId: RPC_NT_NOT_ALL_OBJS_UNEXPORTED
//
// MessageText:
//
//  There is nothing to unexport.
//

  RPC_NT_NOT_ALL_OBJS_UNEXPORTED = NTSTATUS($C002003B);
  {$EXTERNALSYM RPC_NT_NOT_ALL_OBJS_UNEXPORTED}

//
// MessageId: RPC_NT_INTERFACE_NOT_FOUND
//
// MessageText:
//
//  The interface was not found.
//

  RPC_NT_INTERFACE_NOT_FOUND = NTSTATUS($C002003C);
  {$EXTERNALSYM RPC_NT_INTERFACE_NOT_FOUND}

//
// MessageId: RPC_NT_ENTRY_ALREADY_EXISTS
//
// MessageText:
//
//  The entry already exists.
//

  RPC_NT_ENTRY_ALREADY_EXISTS = NTSTATUS($C002003D);
  {$EXTERNALSYM RPC_NT_ENTRY_ALREADY_EXISTS}

//
// MessageId: RPC_NT_ENTRY_NOT_FOUND
//
// MessageText:
//
//  The entry is not found.
//

  RPC_NT_ENTRY_NOT_FOUND = NTSTATUS($C002003E);
  {$EXTERNALSYM RPC_NT_ENTRY_NOT_FOUND}

//
// MessageId: RPC_NT_NAME_SERVICE_UNAVAILABLE
//
// MessageText:
//
//  The name service is unavailable.
//

  RPC_NT_NAME_SERVICE_UNAVAILABLE = NTSTATUS($C002003F);
  {$EXTERNALSYM RPC_NT_NAME_SERVICE_UNAVAILABLE}

//
// MessageId: RPC_NT_INVALID_NAF_ID
//
// MessageText:
//
//  The network address family is invalid.
//

  RPC_NT_INVALID_NAF_ID = NTSTATUS($C0020040);
  {$EXTERNALSYM RPC_NT_INVALID_NAF_ID}

//
// MessageId: RPC_NT_CANNOT_SUPPORT
//
// MessageText:
//
//  The requested operation is not supported.
//

  RPC_NT_CANNOT_SUPPORT = NTSTATUS($C0020041);
  {$EXTERNALSYM RPC_NT_CANNOT_SUPPORT}

//
// MessageId: RPC_NT_NO_CONTEXT_AVAILABLE
//
// MessageText:
//
//  No security context is available to allow impersonation.
//

  RPC_NT_NO_CONTEXT_AVAILABLE = NTSTATUS($C0020042);
  {$EXTERNALSYM RPC_NT_NO_CONTEXT_AVAILABLE}

//
// MessageId: RPC_NT_INTERNAL_ERROR
//
// MessageText:
//
//  An internal error occurred in RPC.
//

  RPC_NT_INTERNAL_ERROR = NTSTATUS($C0020043);
  {$EXTERNALSYM RPC_NT_INTERNAL_ERROR}

//
// MessageId: RPC_NT_ZERO_DIVIDE
//
// MessageText:
//
//  The RPC server attempted an integer divide by zero.
//

  RPC_NT_ZERO_DIVIDE = NTSTATUS($C0020044);
  {$EXTERNALSYM RPC_NT_ZERO_DIVIDE}

//
// MessageId: RPC_NT_ADDRESS_ERROR
//
// MessageText:
//
//  An addressing error occurred in the RPC server.
//

  RPC_NT_ADDRESS_ERROR = NTSTATUS($C0020045);
  {$EXTERNALSYM RPC_NT_ADDRESS_ERROR}

//
// MessageId: RPC_NT_FP_DIV_ZERO
//
// MessageText:
//
//  A floating point operation at the RPC server caused a divide by zero.
//

  RPC_NT_FP_DIV_ZERO = NTSTATUS($C0020046);
  {$EXTERNALSYM RPC_NT_FP_DIV_ZERO}

//
// MessageId: RPC_NT_FP_UNDERFLOW
//
// MessageText:
//
//  A floating point underflow occurred at the RPC server.
//

  RPC_NT_FP_UNDERFLOW = NTSTATUS($C0020047);
  {$EXTERNALSYM RPC_NT_FP_UNDERFLOW}

//
// MessageId: RPC_NT_FP_OVERFLOW
//
// MessageText:
//
//  A floating point overflow occurred at the RPC server.
//

  RPC_NT_FP_OVERFLOW = NTSTATUS($C0020048);
  {$EXTERNALSYM RPC_NT_FP_OVERFLOW}

//
// MessageId: RPC_NT_NO_MORE_ENTRIES
//
// MessageText:
//
//  The list of RPC servers available for auto-handle binding has been exhausted.
//

  RPC_NT_NO_MORE_ENTRIES = NTSTATUS($C0030001);
  {$EXTERNALSYM RPC_NT_NO_MORE_ENTRIES}

//
// MessageId: RPC_NT_SS_CHAR_TRANS_OPEN_FAIL
//
// MessageText:
//
//  The file designated by DCERPCCHARTRANS cannot be opened.
//

  RPC_NT_SS_CHAR_TRANS_OPEN_FAIL = NTSTATUS($C0030002);
  {$EXTERNALSYM RPC_NT_SS_CHAR_TRANS_OPEN_FAIL}

//
// MessageId: RPC_NT_SS_CHAR_TRANS_SHORT_FILE
//
// MessageText:
//
//  The file containing the character translation table has fewer than 512 bytes.
//

  RPC_NT_SS_CHAR_TRANS_SHORT_FILE = NTSTATUS($C0030003);
  {$EXTERNALSYM RPC_NT_SS_CHAR_TRANS_SHORT_FILE}

//
// MessageId: RPC_NT_SS_IN_NULL_CONTEXT
//
// MessageText:
//
//  A null context handle is passed as an [in] parameter.
//

  RPC_NT_SS_IN_NULL_CONTEXT = NTSTATUS($C0030004);
  {$EXTERNALSYM RPC_NT_SS_IN_NULL_CONTEXT}

//
// MessageId: RPC_NT_SS_CONTEXT_MISMATCH
//
// MessageText:
//
//  The context handle does not match any known context handles.
//

  RPC_NT_SS_CONTEXT_MISMATCH = NTSTATUS($C0030005);
  {$EXTERNALSYM RPC_NT_SS_CONTEXT_MISMATCH}

//
// MessageId: RPC_NT_SS_CONTEXT_DAMAGED
//
// MessageText:
//
//  The context handle changed during a call.
//

  RPC_NT_SS_CONTEXT_DAMAGED = NTSTATUS($C0030006);
  {$EXTERNALSYM RPC_NT_SS_CONTEXT_DAMAGED}

//
// MessageId: RPC_NT_SS_HANDLES_MISMATCH
//
// MessageText:
//
//  The binding handles passed to a remote procedure call do not match.
//

  RPC_NT_SS_HANDLES_MISMATCH = NTSTATUS($C0030007);
  {$EXTERNALSYM RPC_NT_SS_HANDLES_MISMATCH}

//
// MessageId: RPC_NT_SS_CANNOT_GET_CALL_HANDLE
//
// MessageText:
//
//  The stub is unable to get the call handle.
//

  RPC_NT_SS_CANNOT_GET_CALL_HANDLE = NTSTATUS($C0030008);
  {$EXTERNALSYM RPC_NT_SS_CANNOT_GET_CALL_HANDLE}

//
// MessageId: RPC_NT_NULL_REF_POINTER
//
// MessageText:
//
//  A null reference pointer was passed to the stub.
//

  RPC_NT_NULL_REF_POINTER = NTSTATUS($C0030009);
  {$EXTERNALSYM RPC_NT_NULL_REF_POINTER}

//
// MessageId: RPC_NT_ENUM_VALUE_OUT_OF_RANGE
//
// MessageText:
//
//  The enumeration value is out of range.
//

  RPC_NT_ENUM_VALUE_OUT_OF_RANGE = NTSTATUS($C003000A);
  {$EXTERNALSYM RPC_NT_ENUM_VALUE_OUT_OF_RANGE}

//
// MessageId: RPC_NT_BYTE_COUNT_TOO_SMALL
//
// MessageText:
//
//  The byte count is too small.
//

  RPC_NT_BYTE_COUNT_TOO_SMALL = NTSTATUS($C003000B);
  {$EXTERNALSYM RPC_NT_BYTE_COUNT_TOO_SMALL}

//
// MessageId: RPC_NT_BAD_STUB_DATA
//
// MessageText:
//
//  The stub received bad data.
//

  RPC_NT_BAD_STUB_DATA = NTSTATUS($C003000C);
  {$EXTERNALSYM RPC_NT_BAD_STUB_DATA}

//
// MessageId: RPC_NT_CALL_IN_PROGRESS
//
// MessageText:
//
//  A remote procedure call is already in progress for this thread.
//

  RPC_NT_CALL_IN_PROGRESS = NTSTATUS($C0020049);
  {$EXTERNALSYM RPC_NT_CALL_IN_PROGRESS}

//
// MessageId: RPC_NT_NO_MORE_BINDINGS
//
// MessageText:
//
//  There are no more bindings.
//

  RPC_NT_NO_MORE_BINDINGS = NTSTATUS($C002004A);
  {$EXTERNALSYM RPC_NT_NO_MORE_BINDINGS}

//
// MessageId: RPC_NT_GROUP_MEMBER_NOT_FOUND
//
// MessageText:
//
//  The group member was not found.
//

  RPC_NT_GROUP_MEMBER_NOT_FOUND = NTSTATUS($C002004B);
  {$EXTERNALSYM RPC_NT_GROUP_MEMBER_NOT_FOUND}

//
// MessageId: EPT_NT_CANT_CREATE
//
// MessageText:
//
//  The endpoint mapper database entry could not be created.
//

  EPT_NT_CANT_CREATE = NTSTATUS($C002004C);
  {$EXTERNALSYM EPT_NT_CANT_CREATE}

//
// MessageId: RPC_NT_INVALID_OBJECT
//
// MessageText:
//
//  The object UUID is the nil UUID.
//

  RPC_NT_INVALID_OBJECT = NTSTATUS($C002004D);
  {$EXTERNALSYM RPC_NT_INVALID_OBJECT}

//
// MessageId: RPC_NT_NO_INTERFACES
//
// MessageText:
//
//  No interfaces have been registered.
//

  RPC_NT_NO_INTERFACES = NTSTATUS($C002004F);
  {$EXTERNALSYM RPC_NT_NO_INTERFACES}

//
// MessageId: RPC_NT_CALL_CANCELLED
//
// MessageText:
//
//  The remote procedure call was cancelled.
//

  RPC_NT_CALL_CANCELLED = NTSTATUS($C0020050);
  {$EXTERNALSYM RPC_NT_CALL_CANCELLED}

//
// MessageId: RPC_NT_BINDING_INCOMPLETE
//
// MessageText:
//
//  The binding handle does not contain all required information.
//

  RPC_NT_BINDING_INCOMPLETE = NTSTATUS($C0020051);
  {$EXTERNALSYM RPC_NT_BINDING_INCOMPLETE}

//
// MessageId: RPC_NT_COMM_FAILURE
//
// MessageText:
//
//  A communications failure occurred during a remote procedure call.
//

  RPC_NT_COMM_FAILURE = NTSTATUS($C0020052);
  {$EXTERNALSYM RPC_NT_COMM_FAILURE}

//
// MessageId: RPC_NT_UNSUPPORTED_AUTHN_LEVEL
//
// MessageText:
//
//  The requested authentication level is not supported.
//

  RPC_NT_UNSUPPORTED_AUTHN_LEVEL = NTSTATUS($C0020053);
  {$EXTERNALSYM RPC_NT_UNSUPPORTED_AUTHN_LEVEL}

//
// MessageId: RPC_NT_NO_PRINC_NAME
//
// MessageText:
//
//  No principal name registered.
//

  RPC_NT_NO_PRINC_NAME = NTSTATUS($C0020054);
  {$EXTERNALSYM RPC_NT_NO_PRINC_NAME}

//
// MessageId: RPC_NT_NOT_RPC_ERROR
//
// MessageText:
//
//  The error specified is not a valid Windows RPC error code.
//

  RPC_NT_NOT_RPC_ERROR = NTSTATUS($C0020055);
  {$EXTERNALSYM RPC_NT_NOT_RPC_ERROR}

//
// MessageId: RPC_NT_UUID_LOCAL_ONLY
//
// MessageText:
//
//  A UUID that is valid only on this computer has been allocated.
//

  RPC_NT_UUID_LOCAL_ONLY = NTSTATUS($40020056);
  {$EXTERNALSYM RPC_NT_UUID_LOCAL_ONLY}

//
// MessageId: RPC_NT_SEC_PKG_ERROR
//
// MessageText:
//
//  A security package specific error occurred.
//

  RPC_NT_SEC_PKG_ERROR = NTSTATUS($C0020057);
  {$EXTERNALSYM RPC_NT_SEC_PKG_ERROR}

//
// MessageId: RPC_NT_NOT_CANCELLED
//
// MessageText:
//
//  Thread is not cancelled.
//

  RPC_NT_NOT_CANCELLED = NTSTATUS($C0020058);
  {$EXTERNALSYM RPC_NT_NOT_CANCELLED}

//
// MessageId: RPC_NT_INVALID_ES_ACTION
//
// MessageText:
//
//  Invalid operation on the encoding/decoding handle.
//

  RPC_NT_INVALID_ES_ACTION = NTSTATUS($C0030059);
  {$EXTERNALSYM RPC_NT_INVALID_ES_ACTION}

//
// MessageId: RPC_NT_WRONG_ES_VERSION
//
// MessageText:
//
//  Incompatible version of the serializing package.
//

  RPC_NT_WRONG_ES_VERSION = NTSTATUS($C003005A);
  {$EXTERNALSYM RPC_NT_WRONG_ES_VERSION}

//
// MessageId: RPC_NT_WRONG_STUB_VERSION
//
// MessageText:
//
//  Incompatible version of the RPC stub.
//

  RPC_NT_WRONG_STUB_VERSION = NTSTATUS($C003005B);
  {$EXTERNALSYM RPC_NT_WRONG_STUB_VERSION}

//
// MessageId: RPC_NT_INVALID_PIPE_OBJECT
//
// MessageText:
//
//  The RPC pipe object is invalid or corrupted.
//

  RPC_NT_INVALID_PIPE_OBJECT = NTSTATUS($C003005C);
  {$EXTERNALSYM RPC_NT_INVALID_PIPE_OBJECT}

//
// MessageId: RPC_NT_INVALID_PIPE_OPERATION
//
// MessageText:
//
//  An invalid operation was attempted on an RPC pipe object.
//

  RPC_NT_INVALID_PIPE_OPERATION = NTSTATUS($C003005D);
  {$EXTERNALSYM RPC_NT_INVALID_PIPE_OPERATION}

//
// MessageId: RPC_NT_WRONG_PIPE_VERSION
//
// MessageText:
//
//  Unsupported RPC pipe version.
//

  RPC_NT_WRONG_PIPE_VERSION = NTSTATUS($C003005E);
  {$EXTERNALSYM RPC_NT_WRONG_PIPE_VERSION}

//
// MessageId: RPC_NT_PIPE_CLOSED
//
// MessageText:
//
//  The RPC pipe object has already been closed.
//

  RPC_NT_PIPE_CLOSED = NTSTATUS($C003005F);
  {$EXTERNALSYM RPC_NT_PIPE_CLOSED}

//
// MessageId: RPC_NT_PIPE_DISCIPLINE_ERROR
//
// MessageText:
//
//  The RPC call completed before all pipes were processed.
//

  RPC_NT_PIPE_DISCIPLINE_ERROR = NTSTATUS($C0030060);
  {$EXTERNALSYM RPC_NT_PIPE_DISCIPLINE_ERROR}

//
// MessageId: RPC_NT_PIPE_EMPTY
//
// MessageText:
//
//  No more data is available from the RPC pipe.
//

  RPC_NT_PIPE_EMPTY = NTSTATUS($C0030061);
  {$EXTERNALSYM RPC_NT_PIPE_EMPTY}

//
// MessageId: RPC_NT_INVALID_ASYNC_HANDLE
//
// MessageText:
//
//  Invalid asynchronous remote procedure call handle.
//

  RPC_NT_INVALID_ASYNC_HANDLE = NTSTATUS($C0020062);
  {$EXTERNALSYM RPC_NT_INVALID_ASYNC_HANDLE}

//
// MessageId: RPC_NT_INVALID_ASYNC_CALL
//
// MessageText:
//
//  Invalid asynchronous RPC call handle for this operation.
//

  RPC_NT_INVALID_ASYNC_CALL = NTSTATUS($C0020063);
  {$EXTERNALSYM RPC_NT_INVALID_ASYNC_CALL}

//
// MessageId: RPC_NT_SEND_INCOMPLETE
//
// MessageText:
//
//  Some data remains to be sent in the request buffer.
//

  RPC_NT_SEND_INCOMPLETE = NTSTATUS($400200AF);
  {$EXTERNALSYM RPC_NT_SEND_INCOMPLETE}

//
// MessageId: STATUS_ACPI_INVALID_OPCODE
//
// MessageText:
//
//  An attempt was made to run an invalid AML opcode
//

  STATUS_ACPI_INVALID_OPCODE = NTSTATUS($C0140001);
  {$EXTERNALSYM STATUS_ACPI_INVALID_OPCODE}

//
// MessageId: STATUS_ACPI_STACK_OVERFLOW
//
// MessageText:
//
//  The AML Interpreter Stack has overflowed
//

  STATUS_ACPI_STACK_OVERFLOW = NTSTATUS($C0140002);
  {$EXTERNALSYM STATUS_ACPI_STACK_OVERFLOW}

//
// MessageId: STATUS_ACPI_ASSERT_FAILED
//
// MessageText:
//
//  An inconsistent state has occurred
//

  STATUS_ACPI_ASSERT_FAILED = NTSTATUS($C0140003);
  {$EXTERNALSYM STATUS_ACPI_ASSERT_FAILED}

//
// MessageId: STATUS_ACPI_INVALID_INDEX
//
// MessageText:
//
//  An attempt was made to access an array outside of its bounds
//

  STATUS_ACPI_INVALID_INDEX = NTSTATUS($C0140004);
  {$EXTERNALSYM STATUS_ACPI_INVALID_INDEX}

//
// MessageId: STATUS_ACPI_INVALID_ARGUMENT
//
// MessageText:
//
//  A required argument was not specified
//

  STATUS_ACPI_INVALID_ARGUMENT = NTSTATUS($C0140005);
  {$EXTERNALSYM STATUS_ACPI_INVALID_ARGUMENT}

//
// MessageId: STATUS_ACPI_FATAL
//
// MessageText:
//
//  A fatal error has occurred
//

  STATUS_ACPI_FATAL = NTSTATUS($C0140006);
  {$EXTERNALSYM STATUS_ACPI_FATAL}

//
// MessageId: STATUS_ACPI_INVALID_SUPERNAME
//
// MessageText:
//
//  An invalid SuperName was specified
//

  STATUS_ACPI_INVALID_SUPERNAME = NTSTATUS($C0140007);
  {$EXTERNALSYM STATUS_ACPI_INVALID_SUPERNAME}

//
// MessageId: STATUS_ACPI_INVALID_ARGTYPE
//
// MessageText:
//
//  An argument with an incorrect type was specified
//

  STATUS_ACPI_INVALID_ARGTYPE = NTSTATUS($C0140008);
  {$EXTERNALSYM STATUS_ACPI_INVALID_ARGTYPE}

//
// MessageId: STATUS_ACPI_INVALID_OBJTYPE
//
// MessageText:
//
//  An object with an incorrect type was specified
//

  STATUS_ACPI_INVALID_OBJTYPE = NTSTATUS($C0140009);
  {$EXTERNALSYM STATUS_ACPI_INVALID_OBJTYPE}

//
// MessageId: STATUS_ACPI_INVALID_TARGETTYPE
//
// MessageText:
//
//  A target with an incorrect type was specified
//

  STATUS_ACPI_INVALID_TARGETTYPE = NTSTATUS($C014000A);
  {$EXTERNALSYM STATUS_ACPI_INVALID_TARGETTYPE}

//
// MessageId: STATUS_ACPI_INCORRECT_ARGUMENT_COUNT
//
// MessageText:
//
//  An incorrect number of arguments were specified
//

  STATUS_ACPI_INCORRECT_ARGUMENT_COUNT = NTSTATUS($C014000B);
  {$EXTERNALSYM STATUS_ACPI_INCORRECT_ARGUMENT_COUNT}

//
// MessageId: STATUS_ACPI_ADDRESS_NOT_MAPPED
//
// MessageText:
//
//  An address failed to translate
//

  STATUS_ACPI_ADDRESS_NOT_MAPPED = NTSTATUS($C014000C);
  {$EXTERNALSYM STATUS_ACPI_ADDRESS_NOT_MAPPED}

//
// MessageId: STATUS_ACPI_INVALID_EVENTTYPE
//
// MessageText:
//
//  An incorrect event type was specified
//

  STATUS_ACPI_INVALID_EVENTTYPE = NTSTATUS($C014000D);
  {$EXTERNALSYM STATUS_ACPI_INVALID_EVENTTYPE}

//
// MessageId: STATUS_ACPI_HANDLER_COLLISION
//
// MessageText:
//
//  A handler for the target already exists
//

  STATUS_ACPI_HANDLER_COLLISION = NTSTATUS($C014000E);
  {$EXTERNALSYM STATUS_ACPI_HANDLER_COLLISION}

//
// MessageId: STATUS_ACPI_INVALID_DATA
//
// MessageText:
//
//  Invalid data for the target was specified
//

  STATUS_ACPI_INVALID_DATA = NTSTATUS($C014000F);
  {$EXTERNALSYM STATUS_ACPI_INVALID_DATA}

//
// MessageId: STATUS_ACPI_INVALID_REGION
//
// MessageText:
//
//  An invalid region for the target was specified
//

  STATUS_ACPI_INVALID_REGION = NTSTATUS($C0140010);
  {$EXTERNALSYM STATUS_ACPI_INVALID_REGION}

//
// MessageId: STATUS_ACPI_INVALID_ACCESS_SIZE
//
// MessageText:
//
//  An attempt was made to access a field outside of the defined range
//

  STATUS_ACPI_INVALID_ACCESS_SIZE = NTSTATUS($C0140011);
  {$EXTERNALSYM STATUS_ACPI_INVALID_ACCESS_SIZE}

//
// MessageId: STATUS_ACPI_ACQUIRE_GLOBAL_LOCK
//
// MessageText:
//
//  The Global system lock could not be acquired
//

  STATUS_ACPI_ACQUIRE_GLOBAL_LOCK = NTSTATUS($C0140012);
  {$EXTERNALSYM STATUS_ACPI_ACQUIRE_GLOBAL_LOCK}

//
// MessageId: STATUS_ACPI_ALREADY_INITIALIZED
//
// MessageText:
//
//  An attempt was made to reinitialize the ACPI subsystem
//

  STATUS_ACPI_ALREADY_INITIALIZED = NTSTATUS($C0140013);
  {$EXTERNALSYM STATUS_ACPI_ALREADY_INITIALIZED}

//
// MessageId: STATUS_ACPI_NOT_INITIALIZED
//
// MessageText:
//
//  The ACPI subsystem has not been initialized
//

  STATUS_ACPI_NOT_INITIALIZED = NTSTATUS($C0140014);
  {$EXTERNALSYM STATUS_ACPI_NOT_INITIALIZED}

//
// MessageId: STATUS_ACPI_INVALID_MUTEX_LEVEL
//
// MessageText:
//
//  An incorrect mutex was specified
//

  STATUS_ACPI_INVALID_MUTEX_LEVEL = NTSTATUS($C0140015);
  {$EXTERNALSYM STATUS_ACPI_INVALID_MUTEX_LEVEL}

//
// MessageId: STATUS_ACPI_MUTEX_NOT_OWNED
//
// MessageText:
//
//  The mutex is not currently owned
//

  STATUS_ACPI_MUTEX_NOT_OWNED = NTSTATUS($C0140016);
  {$EXTERNALSYM STATUS_ACPI_MUTEX_NOT_OWNED}

//
// MessageId: STATUS_ACPI_MUTEX_NOT_OWNER
//
// MessageText:
//
//  An attempt was made to access the mutex by a process that was not the owner
//

  STATUS_ACPI_MUTEX_NOT_OWNER = NTSTATUS($C0140017);
  {$EXTERNALSYM STATUS_ACPI_MUTEX_NOT_OWNER}

//
// MessageId: STATUS_ACPI_RS_ACCESS
//
// MessageText:
//
//  An error occurred during an access to Region Space
//

  STATUS_ACPI_RS_ACCESS = NTSTATUS($C0140018);
  {$EXTERNALSYM STATUS_ACPI_RS_ACCESS}

//
// MessageId: STATUS_ACPI_INVALID_TABLE
//
// MessageText:
//
//  An attempt was made to use an incorrect table
//

  STATUS_ACPI_INVALID_TABLE = NTSTATUS($C0140019);
  {$EXTERNALSYM STATUS_ACPI_INVALID_TABLE}

//
// MessageId: STATUS_ACPI_REG_HANDLER_FAILED
//
// MessageText:
//
//  The registration of an ACPI event failed
//

  STATUS_ACPI_REG_HANDLER_FAILED = NTSTATUS($C0140020);
  {$EXTERNALSYM STATUS_ACPI_REG_HANDLER_FAILED}

//
// MessageId: STATUS_ACPI_POWER_REQUEST_FAILED
//
// MessageText:
//
//  An ACPI Power Object failed to transition state
//

  STATUS_ACPI_POWER_REQUEST_FAILED = NTSTATUS($C0140021);
  {$EXTERNALSYM STATUS_ACPI_POWER_REQUEST_FAILED}

//
// Terminal Server specific Errors
//
//
// MessageId: STATUS_CTX_WINSTATION_NAME_INVALID
//
// MessageText:
//
//  Session name %1 is invalid.
//

  STATUS_CTX_WINSTATION_NAME_INVALID = NTSTATUS($C00A0001);
  {$EXTERNALSYM STATUS_CTX_WINSTATION_NAME_INVALID}

//
// MessageId: STATUS_CTX_INVALID_PD
//
// MessageText:
//
//  The protocol driver %1 is invalid.
//

  STATUS_CTX_INVALID_PD = NTSTATUS($C00A0002);
  {$EXTERNALSYM STATUS_CTX_INVALID_PD}

//
// MessageId: STATUS_CTX_PD_NOT_FOUND
//
// MessageText:
//
//  The protocol driver %1 was not found in the system path.
//

  STATUS_CTX_PD_NOT_FOUND = NTSTATUS($C00A0003);
  {$EXTERNALSYM STATUS_CTX_PD_NOT_FOUND}

//
// MessageId: STATUS_CTX_CDM_CONNECT
//
// MessageText:
//
//  The Client Drive Mapping Service Has Connected on Terminal Connection.
//

  STATUS_CTX_CDM_CONNECT = NTSTATUS($400A0004);
  {$EXTERNALSYM STATUS_CTX_CDM_CONNECT}

//
// MessageId: STATUS_CTX_CDM_DISCONNECT
//
// MessageText:
//
//  The Client Drive Mapping Service Has Disconnected on Terminal Connection.
//

  STATUS_CTX_CDM_DISCONNECT = NTSTATUS($400A0005);
  {$EXTERNALSYM STATUS_CTX_CDM_DISCONNECT}

//
// MessageId: STATUS_CTX_CLOSE_PENDING
//
// MessageText:
//
//  A close operation is pending on the Terminal Connection.
//

  STATUS_CTX_CLOSE_PENDING = NTSTATUS($C00A0006);
  {$EXTERNALSYM STATUS_CTX_CLOSE_PENDING}

//
// MessageId: STATUS_CTX_NO_OUTBUF
//
// MessageText:
//
//  There are no free output buffers available.
//

  STATUS_CTX_NO_OUTBUF = NTSTATUS($C00A0007);
  {$EXTERNALSYM STATUS_CTX_NO_OUTBUF}

//
// MessageId: STATUS_CTX_MODEM_INF_NOT_FOUND
//
// MessageText:
//
//  The MODEM.INF file was not found.
//

  STATUS_CTX_MODEM_INF_NOT_FOUND = NTSTATUS($C00A0008);
  {$EXTERNALSYM STATUS_CTX_MODEM_INF_NOT_FOUND}

//
// MessageId: STATUS_CTX_INVALID_MODEMNAME
//
// MessageText:
//
//  The modem (%1) was not found in MODEM.INF.
//

  STATUS_CTX_INVALID_MODEMNAME = NTSTATUS($C00A0009);
  {$EXTERNALSYM STATUS_CTX_INVALID_MODEMNAME}

//
// MessageId: STATUS_CTX_RESPONSE_ERROR
//
// MessageText:
//
//  The modem did not accept the command sent to it.
//  Verify the configured modem name matches the attached modem.
//

  STATUS_CTX_RESPONSE_ERROR = NTSTATUS($C00A000A);
  {$EXTERNALSYM STATUS_CTX_RESPONSE_ERROR}

//
// MessageId: STATUS_CTX_MODEM_RESPONSE_TIMEOUT
//
// MessageText:
//
//  The modem did not respond to the command sent to it.
//  Verify the modem is properly cabled and powered on.
//

  STATUS_CTX_MODEM_RESPONSE_TIMEOUT = NTSTATUS($C00A000B);
  {$EXTERNALSYM STATUS_CTX_MODEM_RESPONSE_TIMEOUT}

//
// MessageId: STATUS_CTX_MODEM_RESPONSE_NO_CARRIER
//
// MessageText:
//
//  Carrier detect has failed or carrier has been dropped due to disconnect.
//

  STATUS_CTX_MODEM_RESPONSE_NO_CARRIER = NTSTATUS($C00A000C);
  {$EXTERNALSYM STATUS_CTX_MODEM_RESPONSE_NO_CARRIER}

//
// MessageId: STATUS_CTX_MODEM_RESPONSE_NO_DIALTONE
//
// MessageText:
//
//  Dial tone not detected within required time.
//  Verify phone cable is properly attached and functional.
//

  STATUS_CTX_MODEM_RESPONSE_NO_DIALTONE = NTSTATUS($C00A000D);
  {$EXTERNALSYM STATUS_CTX_MODEM_RESPONSE_NO_DIALTONE}

//
// MessageId: STATUS_CTX_MODEM_RESPONSE_BUSY
//
// MessageText:
//
//  Busy signal detected at remote site on callback.
//

  STATUS_CTX_MODEM_RESPONSE_BUSY = NTSTATUS($C00A000E);
  {$EXTERNALSYM STATUS_CTX_MODEM_RESPONSE_BUSY}

//
// MessageId: STATUS_CTX_MODEM_RESPONSE_VOICE
//
// MessageText:
//
//  Voice detected at remote site on callback.
//

  STATUS_CTX_MODEM_RESPONSE_VOICE = NTSTATUS($C00A000F);
  {$EXTERNALSYM STATUS_CTX_MODEM_RESPONSE_VOICE}

//
// MessageId: STATUS_CTX_TD_ERROR
//
// MessageText:
//
//  Transport driver error
//

  STATUS_CTX_TD_ERROR = NTSTATUS($C00A0010);
  {$EXTERNALSYM STATUS_CTX_TD_ERROR}

//
// MessageId: STATUS_CTX_LICENSE_CLIENT_INVALID
//
// MessageText:
//
//  The client you are using is not licensed to use this system. Your logon request is denied.
//

  STATUS_CTX_LICENSE_CLIENT_INVALID = NTSTATUS($C00A0012);
  {$EXTERNALSYM STATUS_CTX_LICENSE_CLIENT_INVALID}

//
// MessageId: STATUS_CTX_LICENSE_NOT_AVAILABLE
//
// MessageText:
//
//  The system has reached its licensed logon limit.
//  Please try again later.
//

  STATUS_CTX_LICENSE_NOT_AVAILABLE = NTSTATUS($C00A0013);
  {$EXTERNALSYM STATUS_CTX_LICENSE_NOT_AVAILABLE}

//
// MessageId: STATUS_CTX_LICENSE_EXPIRED
//
// MessageText:
//
//  The system license has expired. Your logon request is denied.
//

  STATUS_CTX_LICENSE_EXPIRED = NTSTATUS($C00A0014);
  {$EXTERNALSYM STATUS_CTX_LICENSE_EXPIRED}

//
// MessageId: STATUS_CTX_WINSTATION_NOT_FOUND
//
// MessageText:
//
//  The specified session cannot be found.
//

  STATUS_CTX_WINSTATION_NOT_FOUND = NTSTATUS($C00A0015);
  {$EXTERNALSYM STATUS_CTX_WINSTATION_NOT_FOUND}

//
// MessageId: STATUS_CTX_WINSTATION_NAME_COLLISION
//
// MessageText:
//
//  The specified session name is already in use.
//

  STATUS_CTX_WINSTATION_NAME_COLLISION = NTSTATUS($C00A0016);
  {$EXTERNALSYM STATUS_CTX_WINSTATION_NAME_COLLISION}

//
// MessageId: STATUS_CTX_WINSTATION_BUSY
//
// MessageText:
//
//  The requested operation cannot be completed because the Terminal Connection is currently busy processing a connect, disconnect, reset, or delete operation.
//

  STATUS_CTX_WINSTATION_BUSY = NTSTATUS($C00A0017);
  {$EXTERNALSYM STATUS_CTX_WINSTATION_BUSY}

//
// MessageId: STATUS_CTX_BAD_VIDEO_MODE
//
// MessageText:
//
//  An attempt has been made to connect to a session whose video mode is not supported by the current client.
//

  STATUS_CTX_BAD_VIDEO_MODE = NTSTATUS($C00A0018);
  {$EXTERNALSYM STATUS_CTX_BAD_VIDEO_MODE}

//
// MessageId: STATUS_CTX_GRAPHICS_INVALID
//
// MessageText:
//
//  The application attempted to enable DOS graphics mode.
//  DOS graphics mode is not supported.
//

  STATUS_CTX_GRAPHICS_INVALID = NTSTATUS($C00A0022);
  {$EXTERNALSYM STATUS_CTX_GRAPHICS_INVALID}

//
// MessageId: STATUS_CTX_NOT_CONSOLE
//
// MessageText:
//
//  The requested operation can be performed only on the system console.
//  This is most often the result of a driver or system DLL requiring direct console access.
//

  STATUS_CTX_NOT_CONSOLE = NTSTATUS($C00A0024);
  {$EXTERNALSYM STATUS_CTX_NOT_CONSOLE}

//
// MessageId: STATUS_CTX_CLIENT_QUERY_TIMEOUT
//
// MessageText:
//
//  The client failed to respond to the server connect message.
//

  STATUS_CTX_CLIENT_QUERY_TIMEOUT = NTSTATUS($C00A0026);
  {$EXTERNALSYM STATUS_CTX_CLIENT_QUERY_TIMEOUT}

//
// MessageId: STATUS_CTX_CONSOLE_DISCONNECT
//
// MessageText:
//
//  Disconnecting the console session is not supported.
//

  STATUS_CTX_CONSOLE_DISCONNECT = NTSTATUS($C00A0027);
  {$EXTERNALSYM STATUS_CTX_CONSOLE_DISCONNECT}

//
// MessageId: STATUS_CTX_CONSOLE_CONNECT
//
// MessageText:
//
//  Reconnecting a disconnected session to the console is not supported.
//

  STATUS_CTX_CONSOLE_CONNECT = NTSTATUS($C00A0028);
  {$EXTERNALSYM STATUS_CTX_CONSOLE_CONNECT}

//
// MessageId: STATUS_CTX_SHADOW_DENIED
//
// MessageText:
//
//  The request to control another session remotely was denied.
//

  STATUS_CTX_SHADOW_DENIED = NTSTATUS($C00A002A);
  {$EXTERNALSYM STATUS_CTX_SHADOW_DENIED}

//
// MessageId: STATUS_CTX_WINSTATION_ACCESS_DENIED
//
// MessageText:
//
//  A process has requested access to a session, but has not been granted those access rights.
//

  STATUS_CTX_WINSTATION_ACCESS_DENIED = NTSTATUS($C00A002B);
  {$EXTERNALSYM STATUS_CTX_WINSTATION_ACCESS_DENIED}

//
// MessageId: STATUS_CTX_INVALID_WD
//
// MessageText:
//
//  The Terminal Connection driver %1 is invalid.
//

  STATUS_CTX_INVALID_WD = NTSTATUS($C00A002E);
  {$EXTERNALSYM STATUS_CTX_INVALID_WD}

//
// MessageId: STATUS_CTX_WD_NOT_FOUND
//
// MessageText:
//
//  The Terminal Connection driver %1 was not found in the system path.
//

  STATUS_CTX_WD_NOT_FOUND = NTSTATUS($C00A002F);
  {$EXTERNALSYM STATUS_CTX_WD_NOT_FOUND}

//
// MessageId: STATUS_CTX_SHADOW_INVALID
//
// MessageText:
//
//  The requested session cannot be controlled remotely.
//  This may be because the session is disconnected or does not currently have a user logged on.
//  Also, you cannot control a session remotely from the system console or control the system console remotely.
//  And you cannot remote control your own current session.
//

  STATUS_CTX_SHADOW_INVALID = NTSTATUS($C00A0030);
  {$EXTERNALSYM STATUS_CTX_SHADOW_INVALID}

//
// MessageId: STATUS_CTX_SHADOW_DISABLED
//
// MessageText:
//
//  The requested session is not configured to allow remote control.
//

  STATUS_CTX_SHADOW_DISABLED = NTSTATUS($C00A0031);
  {$EXTERNALSYM STATUS_CTX_SHADOW_DISABLED}

//
// MessageId: STATUS_RDP_PROTOCOL_ERROR
//
// MessageText:
//
//  The RDP protocol component %2 detected an error in the protocol stream and has disconnected the client.
//

  STATUS_RDP_PROTOCOL_ERROR = NTSTATUS($C00A0032);
  {$EXTERNALSYM STATUS_RDP_PROTOCOL_ERROR}

//
// MessageId: STATUS_CTX_CLIENT_LICENSE_NOT_SET
//
// MessageText:
//
//  Your request to connect to this Terminal server has been rejected.
//  Your Terminal Server Client license number has not been entered for this copy of the Terminal Client.
//  Please call your system administrator for help in entering a valid, unique license number for this Terminal Server Client.
//  Click OK to continue.
//

  STATUS_CTX_CLIENT_LICENSE_NOT_SET = NTSTATUS($C00A0033);
  {$EXTERNALSYM STATUS_CTX_CLIENT_LICENSE_NOT_SET}

//
// MessageId: STATUS_CTX_CLIENT_LICENSE_IN_USE
//
// MessageText:
//
//  Your request to connect to this Terminal server has been rejected.
//  Your Terminal Server Client license number is currently being used by another user.
//  Please call your system administrator to obtain a new copy of the Terminal Server Client with a valid, unique license number.
//  Click OK to continue.
//

  STATUS_CTX_CLIENT_LICENSE_IN_USE = NTSTATUS($C00A0034);
  {$EXTERNALSYM STATUS_CTX_CLIENT_LICENSE_IN_USE}

//
// MessageId: STATUS_PNP_BAD_MPS_TABLE
//
// MessageText:
//
//  A device is missing in the system BIOS MPS table. This device will not be used. 
//  Please contact your system vendor for system BIOS update.
//

  STATUS_PNP_BAD_MPS_TABLE = NTSTATUS($C0040035);
  {$EXTERNALSYM STATUS_PNP_BAD_MPS_TABLE}

//
// MessageId: STATUS_PNP_TRANSLATION_FAILED
//
// MessageText:
//
//  A translator failed to translate resources.
//

  STATUS_PNP_TRANSLATION_FAILED = NTSTATUS($C0040036);
  {$EXTERNALSYM STATUS_PNP_TRANSLATION_FAILED}

//
// MessageId: STATUS_PNP_IRQ_TRANSLATION_FAILED
//
// MessageText:
//
//  A IRQ translator failed to translate resources.
//

  STATUS_PNP_IRQ_TRANSLATION_FAILED = NTSTATUS($C0040037);
  {$EXTERNALSYM STATUS_PNP_IRQ_TRANSLATION_FAILED}

{$ENDIF JWA_INTERFACESECTION}

{$IFNDEF JWA_INCLUDEMODE}
implementation
{$ENDIF !JWA_INCLUDEMODE}

{$IFDEF JWA_IMPLEMENTATIONSECTION}
{$ENDIF JWA_IMPLEMENTATIONSECTION}

{$IFNDEF JWA_INCLUDEMODE}
end.
{$ENDIF !JWA_INCLUDEMODE}