freepascal.compiler/compiler/msgtxt.inc

{$ifdef Delphi}
const msgtxt : array[0..000165] of string[240]=(
{$else Delphi}
const msgtxt : array[0..000165,1..240] of char=(
{$endif Delphi}
  '01000_T_Compiler: $1'#000+
  '01001_D_Compiler OS: $1'#000+
  '01002_I_Target OS: $1'#000+
  '01003_T_Using executable path: $1'#000+
  '01004_T_Using unit path: $1'#000+
  '01005_T_Using include path: $1'#000+
  '01006_T_Using library path: $1'#000+
  '01007_T_Using object path: $1'#000+
  '01008_I_$1 Lines co','mpiled, $2 sec$3'#000+
  '01009_F_No memory left'#000+
  '01010_I_Writing Resource String Table file: $1'#000+
  '01011_E_Writing Resource String Table file: $1'#000+
  '01012_I_Fatal:'#000+
  '01013_I_Error:'#000+
  '01014_I_Warning:'#000+
  '01015_I_Note:'#000+
  '01016_I_Hint:'#000+
  '01017_E_Path "$1" does not exis','t'#000+
  '01018_F_Compilation aborted'#000+
  '02000_F_Unexpected end of file'#000+
  '02001_F_String exceeds line'#000+
  '02002_F_illegal character "$1" ($2)'#000+
  '02003_F_Syntax error, "$1" expected but "$2" found'#000+
  '02004_TL_Start reading includefile $1'#000+
  '02005_W_Comment level $1 f','ound'#000+
  '02008_N_Ignored compiler switch "$1"'#000+
  '02009_W_Illegal compiler switch "$1"'#000+
  '02010_W_Misplaced global compiler switch'#000+
  '02011_E_Illegal char constant'#000+
  '02012_F_Can'#039't open file "$1"'#000+
  '02013_F_Can'#039't open include file "$1"'#000+
  '02015_E_Illegal record a','lignment specifier "$1"'#000+
  '02016_E_Illegal enum minimum-size specifier "$1"'#000+
  '02017_E_$ENDIF expected for $1 $2 defined in $3 line $4'#000+
  '02018_E_Syntax error while parsing a conditional compiling expression'#000+
  '02019_E_Evaluating a conditional compilin','g expression'#000+
  '02020_W_Macro contents are limited to 255 characters in length'#000+
  '02021_E_ENDIF without IF(N)DEF'#000+
  '02022_F_User defined: $1'#000+
  '02023_E_User defined: $1'#000+
  '02024_W_User defined: $1'#000+
  '02025_N_User defined: $1'#000+
  '02026_H_User defined: $1'#000+
  '02027_I_','User defined: $1'#000+
  '02028_E_Keyword redefined as macro has no effect'#000+
  '02029_F_Macro buffer overflow while reading or expanding a macro'#000+
  '02030_W_Expanding of macros exceeds a depth of 16.'#000+
  '02031_W_compiler switches aren'#039't supported in // styled co','mments'+
  #000+
  '02032_DL_Handling switch "$1"'#000+
  '02033_CL_ENDIF $1 found'#000+
  '02034_CL_IFDEF $1 found, $2'#000+
  '02035_CL_IFOPT $1 found, $2'#000+
  '02036_CL_IF $1 found, $2'#000+
  '02037_CL_IFNDEF $1 found, $2'#000+
  '02038_CL_ELSE $1 found, $2'#000+
  '02039_CL_Skipping until...'#000+
  '02040_I_Press <','return> to continue'#000+
  '02041_W_Unsupported switch "$1"'#000+
  '02042_W_Illegal compiler directive "$1"'#000+
  '02043_TL_Back in $1'#000+
  '02044_W_Unsupported application type: "$1"'#000+
  '02045_W_APPTYPE is not supported by the target OS'#000+
  '02046_W_DESCRIPTION is not supporte','d by the target OS'#000+
  '02047_N_VERSION is not supported by target OS'#000+
  '02048_N_VERSION only for exes or DLLs'#000+
  '02049_W_Wrong format for VERSION directive "$1"'#000+
  '02050_E_Illegal assembler style specified "$1"'#000+
  '02051_W_ASM reader switch is not possible ','inside asm statement, "$1"'+
  ' will be effective only for next'#000+
  '02052_E_Wrong switch toggle, use ON/OFF or +/-'#000+
  '02053_E_Resource files are not supported for this target'#000+
  '02054_W_Include environment "$1" not found in environment'#000+
  '02055_E_Illegal val','ue for FPU register limit'#000+
  '02056_W_Only one resource file is supported for this target'#000+
  '02057_W_Macro support has been turned off'#000+
  '02058_E_Illegal interface type specified. Valids are COM, CORBA or DEF'+
  'AULT.'#000+
  '02059_W_APPID is only supported for ','PalmOS'#000+
  '02060_W_APPNAME is only supported for PalmOS'#000+
  '02061_E_Constant strings can'#039't be longer than 255 chars'#000+
  '02062_F_Including include files exceeds a depth of 16.'#000+
  '02063_F_Too many levels of PUSH'#000+
  '02064_E_A POP without a preceding PUSH'#000+
  '02065_','E_Macro or compile time variable "$1" does not have any value'#000+
  '02066_E_Wrong switch toggle, use ON/OFF/DEFAULT or +/-/*'#000+
  '02067_E_Mode switch "$1" not allowed here'#000+
  '02068_E_Compile time variable or macro "$1" is not defined.'#000+
  '02069_E_UTF-8 code ','greater than 65535 found'#000+
  '02070_E_Malformed UTF-8 string'#000+
  '02071_C_UTF-8 signature found, using UTF-8 encoding'#000+
  '02072_E_Compile time expression: Wanted $1 but got $2 at $3'#000+
  '02073_N_APPTYPE is not supported by the target OS'#000+
  '02074_E_Illegal optimi','zation specified "$1"'#000+
  '03000_E_Parser - Syntax Error'#000+
  '03004_E_INTERRUPT procedure can'#039't be nested'#000+
  '03005_W_Procedure type "$1" ignored'#000+
  '03006_E_Not all declarations of "$1" are declared with OVERLOAD'#000+
  '03008_E_Duplicate exported function name "$1','"'#000+
  '03009_E_Duplicate exported function index $1'#000+
  '03010_E_Invalid index for exported function'#000+
  '03011_W_Relocatable DLL or executable $1 debug info does not work, dis'+
  'abled.'#000+
  '03012_W_To allow debugging for win32 code you need to disable relocati'+
  'on',' with -WN option'#000+
  '03013_E_Constructor name must be INIT'#000+
  '03014_E_Destructor name must be DONE'#000+
  '03016_E_Procedure type INLINE not supported'#000+
  '03018_W_Constructor should be public'#000+
  '03019_W_Destructor should be public'#000+
  '03020_N_Class should have one d','estructor only'#000+
  '03021_E_Local class definitions are not allowed'#000+
  '03022_F_Anonym class definitions are not allowed'#000+
  '03023_N_The object "$1" has no VMT'#000+
  '03024_E_Illegal parameter list'#000+
  '03026_E_Wrong number of parameters specified'#000+
  '03027_E_overloade','d identifier "$1" isn'#039't a function'#000+
  '03028_E_overloaded functions have the same parameter list'#000+
  '03029_E_function header doesn'#039't match the forward declaration "$1"'+
  #000+
  '03030_E_function header "$1" doesn'#039't match forward : var name chan'+
  'ges $2 => $3'#000+
  '0','3031_N_Values in enumeration types have to be ascending'#000+
  '03033_E_With can not be used for variables in a different segment'#000+
  '03034_E_function nesting > 31'#000+
  '03035_E_range check error while evaluating constants'#000+
  '03036_W_range check error while eva','luating constants'#000+
  '03037_E_duplicate case label'#000+
  '03038_E_Upper bound of case range is less than lower bound'#000+
  '03039_E_typed constants of classes are not allowed'#000+
  '03040_E_functions variables of overloaded functions are not allowed'#000+
  '03041_E_string ','length must be a value from 1 to 255'#000+
  '03042_W_use extended syntax of NEW and DISPOSE for instances of object'+
  's'#000+
  '03043_W_use of NEW or DISPOSE for untyped pointers is meaningless'#000+
  '03044_E_use of NEW or DISPOSE is not possible for untyped pointer','s'#000+
  '03045_E_class identifier expected'#000+
  '03046_E_type identifier not allowed here'#000+
  '03047_E_method identifier expected'#000+
  '03048_E_function header doesn'#039't match any method of this class "$1'+
  '"'#000+
  '03049_DL_procedure/function $1'#000+
  '03050_E_Illegal floating poin','t constant'#000+
  '03051_E_FAIL can be used in constructors only'#000+
  '03052_E_Destructors can'#039't have parameters'#000+
  '03053_E_Only class methods can be referred with class references'#000+
  '03054_E_Only class methods can be accessed in class methods'#000+
  '03055_E_Constant',' and CASE types do not match'#000+
  '03056_E_The symbol can'#039't be exported from a library'#000+
  '03057_W_An inherited method is hidden by "$1"'#000+
  '03058_E_There is no method in an ancestor class to be overridden: "$1"'+
  #000+
  '03059_E_No member is provided to access pr','operty'#000+
  '03060_W_Stored property directive is not yet implemented'#000+
  '03061_E_Illegal symbol for property access'#000+
  '03062_E_Cannot access a protected field of an object here'#000+
  '03063_E_Cannot access a private field of an object here'#000+
  '03066_E_Overridden ','methods must have the same return type: "$2" is o'+
  'verriden by "$1" which has another return type'#000+
  '03067_E_EXPORT declared functions can'#039't be nested'#000+
  '03068_E_Methods can'#039't be EXPORTed'#000+
  '03069_E_Call by var parameters have to match exactly: Got "$','1" expec'+
  'ted "$2"'#000+
  '03070_E_Class isn'#039't a parent class of the current class'#000+
  '03071_E_SELF is only allowed in methods'#000+
  '03072_E_Methods can be only in other methods called direct with type i'+
  'dentifier of the class'#000+
  '03073_E_Illegal use of '#039':'#039#000+
  '03074_E','_range check error in set constructor or duplicate set elemen'+
  't'#000+
  '03075_E_Pointer to object expected'#000+
  '03076_E_Expression must be constructor call'#000+
  '03077_E_Expression must be destructor call'#000+
  '03078_E_Illegal order of record elements'#000+
  '03079_E_Expres','sion type must be class or record type'#000+
  '03080_E_Procedures can'#039't return a value'#000+
  '03081_E_constructors and destructors must be methods'#000+
  '03082_E_Operator is not overloaded'#000+
  '03083_E_Impossible to overload assignment for equal types'#000+
  '03084_E_Impossi','ble operator overload'#000+
  '03085_E_Re-raise isn'#039't possible there'#000+
  '03086_E_The extended syntax of new or dispose isn'#039't allowed for a '+
  'class'#000+
  '03088_E_Procedure overloading is switched off'#000+
  '03089_E_It is not possible to overload this operator (overload',' = ins'+
  'tead)'#000+
  '03090_E_Comparative operator must return a boolean value'#000+
  '03091_E_Only virtual methods can be abstract'#000+
  '03092_F_Use of unsupported feature!'#000+
  '03093_E_The mix of different kind of objects (class, object, interface'+
  ', etc) isn'#039't allowed',#000+
  '03094_W_Unknown procedure directive had to be ignored: "$1"'#000+
  '03095_E_absolute can only be associated to one variable'#000+
  '03096_E_absolute can only be associated with a var or const'#000+
  '03097_E_Only one variable can be initialized'#000+
  '03098_E_Abstract m','ethods shouldn'#039't have any definition (with fun'+
  'ction body)'#000+
  '03099_E_This overloaded function can'#039't be local (must be exported)'+
  #000+
  '03100_W_Virtual methods are used without a constructor in "$1"'#000+
  '03101_CL_Macro defined: $1'#000+
  '03102_CL_Macro undefined:',' $1'#000+
  '03103_CL_Macro $1 set to $2'#000+
  '03104_I_Compiling $1'#000+
  '03105_UL_Parsing interface of unit $1'#000+
  '03106_UL_Parsing implementation of $1'#000+
  '03107_DL_Compiling $1 for the second time'#000+
  '03109_E_No property found to override'#000+
  '03110_E_Only one default proper','ty is allowed'#000+
  '03111_E_The default property must be an array property'#000+
  '03112_E_Virtual constructors are only supported in class object model'#000+
  '03113_E_No default property available'#000+
  '03114_E_The class can'#039't have a published section, use the {$M+}',' '+
  'switch'#000+
  '03115_E_Forward declaration of class "$1" must be resolved here to use'+
  ' the class as ancestor'#000+
  '03116_E_Local operators not supported'#000+
  '03117_E_Procedure directive "$1" not allowed in interface section'#000+
  '03118_E_Procedure directive "$1" no','t allowed in implementation secti'+
  'on'#000+
  '03119_E_Procedure directive "$1" not allowed in procvar declaration'#000+
  '03120_E_Function is already declared Public/Forward "$1"'#000+
  '03121_E_Can'#039't use both EXPORT and EXTERNAL'#000+
  '03123_W_"$1" not yet supported insid','e inline procedure/function'#000+
  '03124_W_Inlining disabled'#000+
  '03125_I_Writing Browser log $1'#000+
  '03126_H_may be pointer dereference is missing'#000+
  '03127_F_Selected assembler reader not supported'#000+
  '03128_E_Procedure directive "$1" has conflicts with other dir','ectives'+
  #000+
  '03129_E_Calling convention doesn'#039't match forward'#000+
  '03131_E_Property can'#039't have a default value'#000+
  '03132_E_The default value of a property must be constant'#000+
  '03133_E_Symbol can'#039't be published, can be only a class'#000+
  '03134_E_That kind of proper','ty can'#039't be published'#000+
  '03136_E_An import name is required'#000+
  '03138_E_Division by zero'#000+
  '03139_E_Invalid floating point operation'#000+
  '03140_E_Upper bound of range is less than lower bound'#000+
  '03141_W_string "$1" is longer than "$2"'#000+
  '03142_E_string length i','s larger than array of char length'#000+
  '03143_E_Illegal expression after message directive'#000+
  '03144_E_Message handlers can take only one call by ref. parameter'#000+
  '03145_E_Duplicate message label: "$1"'#000+
  '03146_E_Self can only be an explicit parameter in ','methods which are '+
  'message handlers'#000+
  '03147_E_Threadvars can be only static or global'#000+
  '03148_F_Direct assembler not supported for binary output format'#000+
  '03149_W_Don'#039't load OBJPAS unit manually, use \{\$mode objfpc\} or '+
  '\{\$mode delphi\} instead'#000+
  '0','3150_E_OVERRIDE can'#039't be used in objects'#000+
  '03151_E_Data types which require initialization/finalization can'#039't'+
  ' be used in variant records'#000+
  '03152_E_Resourcestrings can be only static or global'#000+
  '03153_E_Exit with argument can'#039't be used here'#000+
  '03154_','E_The type of the storage symbol must be boolean'#000+
  '03155_E_This symbol isn'#039't allowed as storage symbol'#000+
  '03156_E_Only class which are compiled in $M+ mode can be published'#000+
  '03157_E_Procedure directive expected'#000+
  '03158_E_The value for a property in','dex must be of an ordinal type'#000+
  '03159_E_Procedure name to short to be exported'#000+
  '03160_E_No DEFFILE entry can be generated for unit global vars'#000+
  '03161_E_Compile without -WD option'#000+
  '03162_F_You need ObjFpc (-S2) or Delphi (-Sd) mode to compile th','is m'+
  'odule'#000+
  '03163_E_Can'#039't export with index under $1'#000+
  '03164_E_Exporting of variables is not supported under $1'#000+
  '03165_E_Improper GUID syntax'#000+
  '03168_W_Procedure named "$1" not found that is suitable for implementi'+
  'ng the $2.$3'#000+
  '03169_E_interface id','entifier expected'#000+
  '03170_E_Type "$1" can'#039't be used as array index type'#000+
  '03171_E_Con- and destructors aren'#039't allowed in interfaces'#000+
  '03172_E_Access specifiers can'#039't be used in INTERFACES'#000+
  '03173_E_An interface can'#039't contain fields'#000+
  '03174_E_Can'#039't de','clare local procedure as EXTERNAL'#000+
  '03175_W_Some fields coming before "$1" weren'#039't initialized'#000+
  '03176_E_Some fields coming before "$1" weren'#039't initialized'#000+
  '03177_W_Some fields coming after "$1" weren'#039't initialized'#000+
  '03178_E_VarArgs directive with','out CDecl and External'#000+
  '03179_E_Self must be a normal (call-by-value) parameter'#000+
  '03180_E_Interface "$1" has no interface identification'#000+
  '03181_E_Unknown class field or method identifier "$1"'#000+
  '03182_W_Overriding calling convention "$1" with "$2"',#000+
  '03183_E_Typed constants of the type "procedure of object" can only be '+
  'initialized with NIL'#000+
  '03184_E_Default value can only be assigned to one parameter'#000+
  '03185_E_Default parameter required for "$1"'#000+
  '03186_W_Use of unsupported feature!'#000+
  '03187_H_','C arrays are passed by reference'#000+
  '03188_E_C array of const must be the last argument'#000+
  '03189_H_Type "$1" redefinition'#000+
  '03190_W_cdecl'#039'ared functions have no high parameter'#000+
  '03191_W_cdecl'#039'ared functions do not support open strings'#000+
  '03192_E_Cannot i','nitialize variables declared as threadvar'#000+
  '03193_E_Message directive is only allowed in Classes'#000+
  '03194_E_Procedure or Function expected'#000+
  '03195_W_Calling convention directive ignored: "$1"'#000+
  '03196_E_REINTRODUCE can'#039't be used in objects'#000+
  '03197_E_Ea','ch argument must have its own location'#000+
  '03198_E_Each argument must have an explicit location'#000+
  '03199_E_Unknown argument location'#000+
  '03200_E_32 Bit-Integer or pointer variable expected'#000+
  '03201_E_Goto statements aren'#039't allowed between different proce','du'+
  'res'#000+
  '03202_F_Procedure too complex, it requires too much registers'#000+
  '03203_E_Illegal expression'#000+
  '03204_E_Invalid integer expression'#000+
  '03205_E_Illegal qualifier'#000+
  '03206_E_High range limit < low range limit'#000+
  '03207_E_Exit'#039's parameter must be the name',' of the procedure it is'+
  ' used in'#000+
  '03208_E_Illegal assignment to for-loop variable "$1"'#000+
  '03209_E_Can'#039't declare local variable as EXTERNAL'#000+
  '03210_E_Procedure is already declared EXTERNAL'#000+
  '03211_W_Implicit uses of Variants unit'#000+
  '03212_E_Class and st','atic methods can'#039't be used in INTERFACES'#000+
  '03213_E_Overflow in arithmetic operation'#000+
  '03214_E_Protected or private expected'#000+
  '03215_E_SLICE can'#039't be used outside of parameter list'#000+
  '03216_E_A DISPINTERFACE can'#039't have a parent class'#000+
  '03217_E_A DISPIN','TERFACE needs a guid'#000+
  '03218_W_Overridden methods must have a related return type. This code '+
  'may crash, it depends on a Delphi parser bug ("$2" is overriden by "$1'+
  '" which has another return type)'#000+
  '04000_E_Type mismatch'#000+
  '04001_E_Incompatible typ','es: got "$1" expected "$2"'#000+
  '04002_E_Type mismatch between "$1" and "$2"'#000+
  '04003_E_Type identifier expected'#000+
  '04004_E_Variable identifier expected'#000+
  '04005_E_Integer expression expected, but got "$1"'#000+
  '04006_E_Boolean expression expected, but got "$1"',#000+
  '04007_E_Ordinal expression expected'#000+
  '04008_E_pointer type expected, but got "$1"'#000+
  '04009_E_class type expected, but got "$1"'#000+
  '04011_E_Can'#039't evaluate constant expression'#000+
  '04012_E_Set elements are not compatible'#000+
  '04013_E_Operation not implemented ','for sets'#000+
  '04014_W_Automatic type conversion from floating type to COMP which is '+
  'an integer type'#000+
  '04015_H_use DIV instead to get an integer result'#000+
  '04016_E_string types doesn'#039't match, because of $V+ mode'#000+
  '04017_E_succ or pred on enums with assig','nments not possible'#000+
  '04018_E_Can'#039't read or write variables of this type'#000+
  '04019_E_Can'#039't use readln or writeln on typed file'#000+
  '04020_E_Can'#039't use read or write on untyped file.'#000+
  '04021_E_Type conflict between set elements'#000+
  '04022_W_lo/hi(dword/qword) ','returns the upper/lower word/dword'#000+
  '04023_E_Integer or real expression expected'#000+
  '04024_E_Wrong type "$1" in array constructor'#000+
  '04025_E_Incompatible type for arg no. $1: Got "$2", expected "$3"'#000+
  '04026_E_Method (variable) and Procedure (variable)',' are not compatibl'+
  'e'#000+
  '04027_E_Illegal constant passed to internal math function'#000+
  '04028_E_Can'#039't get the address of constants'#000+
  '04029_E_Argument can'#039't be assigned to'#000+
  '04030_E_Can'#039't assign local procedure/function to procedure variabl'+
  'e'#000+
  '04031_E_Can'#039't',' assign values to an address'#000+
  '04032_E_Can'#039't assign values to const variable'#000+
  '04033_E_Array type required'#000+
  '04034_E_interface type expected, but got "$1"'#000+
  '04035_W_Mixing signed expressions and longwords gives a 64bit result'#000+
  '04036_W_Mixing signed ','expressions and cardinals here may cause a ran'+
  'ge check error'#000+
  '04037_E_Typecast has different size ($1 -> $2) in assignment'#000+
  '04038_E_enums with assignments can'#039't be used as array index'#000+
  '04039_E_Class or Object types "$1" and "$2" are not relate','d'#000+
  '04040_W_Class types "$1" and "$2" are not related'#000+
  '04041_E_Class or interface type expected, but got "$1"'#000+
  '04042_E_Type "$1" is not completely defined'#000+
  '04043_W_String literal has more characters than short string length'#000+
  '04044_W_Comparison is',' always false due to range of values'#000+
  '04045_W_Comparison is always true due to range of values'#000+
  '04046_W_Constructing a class "$1" with abstract methods'#000+
  '04047_H_The left operand of the IN operator should be byte sized'#000+
  '04048_W_Type size mismatc','h, possible loss of data / range check erro'+
  'r'#000+
  '04049_H_Type size mismatch, possible loss of data / range check error'#000+
  '04050_E_The address of an abstract method can'#039't be taken'#000+
  '04051_E_The operator is not applicable for the operand type'#000+
  '04052_E_','Constant Expression expected'#000+
  '04053_E_Operation "$1" not supported for types "$2" and "$3"'#000+
  '04054_E_Illegal type conversion: "$1" to "$2"'#000+
  '04055_H_Conversion between ordinals and pointers is not portable'#000+
  '04056_W_Conversion between ordinals and',' pointers is not portable'#000+
  '04057_E_Can'#039't determine which overloaded function to call'#000+
  '04058_E_Illegal counter variable'#000+
  '04059_W_Converting constant real value to double for C variable argume'+
  'nt, add explicit typecast to prevent this.'#000+
  '05000_E_Id','entifier not found "$1"'#000+
  '05001_F_Internal Error in SymTableStack()'#000+
  '05002_E_Duplicate identifier "$1"'#000+
  '05003_H_Identifier already defined in $1 at line $2'#000+
  '05004_E_Unknown identifier "$1"'#000+
  '05005_E_Forward declaration not solved "$1"'#000+
  '05007_E_Erro','r in type definition'#000+
  '05009_E_Forward type not resolved "$1"'#000+
  '05010_E_Only static variables can be used in static methods or outside'+
  ' methods'#000+
  '05012_F_record or class type expected'#000+
  '05013_E_Instances of classes or objects with an abstract method',' are '+
  'not allowed'#000+
  '05014_W_Label not defined "$1"'#000+
  '05015_E_Label used but not defined "$1"'#000+
  '05016_E_Illegal label declaration'#000+
  '05017_E_GOTO and LABEL are not supported (use switch -Sg)'#000+
  '05018_E_Label not found'#000+
  '05019_E_identifier isn'#039't a label'#000+
  '050','20_E_label already defined'#000+
  '05021_E_illegal type declaration of set elements'#000+
  '05022_E_Forward class definition not resolved "$1"'#000+
  '05023_H_Unit "$1" not used in $2'#000+
  '05024_H_Parameter "$1" not used'#000+
  '05025_N_Local variable "$1" not used'#000+
  '05026_H_Val','ue parameter "$1" is assigned but never used'#000+
  '05027_N_Local variable "$1" is assigned but never used'#000+
  '05028_H_Local $1 "$2" is not used'#000+
  '05029_N_Private field "$1.$2" is never used'#000+
  '05030_N_Private field "$1.$2" is assigned but never used'#000+
  '05031','_N_Private method "$1.$2" never used'#000+
  '05032_E_Set type expected'#000+
  '05033_W_Function result does not seem to be set'#000+
  '05034_W_Type "$1" is not aligned correctly in current record for C'#000+
  '05035_E_Unknown record field identifier "$1"'#000+
  '05036_W_Local var','iable "$1" does not seem to be initialized'#000+
  '05037_W_Variable "$1" does not seem to be initialized'#000+
  '05038_E_identifier idents no member "$1"'#000+
  '05039_H_Found declaration: $1'#000+
  '05040_E_Data element too large'#000+
  '05042_E_No matching implementation for in','terface method "$1" found'#000+
  '05043_W_Symbol "$1" is deprecated'#000+
  '05044_W_Symbol "$1" is not portable'#000+
  '05055_W_Symbol "$1" is not implemented'#000+
  '05056_E_Can'#039't create unique type from this type'#000+
  '05057_H_Local variable "$1" does not seem to be initializ','ed'#000+
  '05058_H_Variable "$1" does not seem to be initialized'#000+
  '05059_W_Function result variable does not seem to initialized'#000+
  '05060_H_Function result variable does not seem to be initialized'#000+
  '05061_W_Variable "$1" read but nowhere assigned'#000+
  '06009_E_','Parameter list size exceeds 65535 bytes'#000+
  '06012_E_File types must be var parameters'#000+
  '06013_E_The use of a far pointer isn'#039't allowed there'#000+
  '06015_E_EXPORT declared functions can'#039't be called'#000+
  '06016_W_Possible illegal call of constructor or destruc','tor'#000+
  '06017_N_Inefficient code'#000+
  '06018_W_unreachable code'#000+
  '06020_E_Abstract methods can'#039't be called directly'#000+
  '06027_DL_Register $1 weight $2 $3'#000+
  '06029_DL_Stack frame is omitted'#000+
  '06031_E_Object or class methods can'#039't be inline.'#000+
  '06032_E_Procvar calls',' cannot be inline.'#000+
  '06033_E_No code for inline procedure stored'#000+
  '06035_E_Element zero of an ansi/wide- or longstring can'#039't be acces'+
  'sed, use (set)length instead'#000+
  '06037_E_Constructors or destructors can not be called inside a '#039'wi'+
  'th'#039' clause'#000+
  '06038','_E_Cannot call message handler methods directly'#000+
  '06039_E_Jump in or outside of an exception block'#000+
  '06040_E_Control flow statements aren'#039't allowed in a finally block'#000+
  '06041_W_Parameters size exceeds limit for certain cpu'#039's'#000+
  '06042_W_Local variabl','e size exceed limit for certain cpu'#039's'#000+
  '06043_E_Local variables size exceeds supported limit'#000+
  '06044_E_BREAK not allowed'#000+
  '06045_E_CONTINUE not allowed'#000+
  '06046_F_Unknown compilerproc "$1". Check if you use the correct run ti'+
  'me library.'#000+
  '07000_DL_Sta','rting $1 styled assembler parsing'#000+
  '07001_DL_Finished $1 styled assembler parsing'#000+
  '07002_E_Non-label pattern contains @'#000+
  '07004_E_Error building record offset'#000+
  '07005_E_OFFSET used without identifier'#000+
  '07006_E_TYPE used without identifier'#000+
  '07007_E_Ca','nnot use local variable or parameters here'#000+
  '07008_E_need to use OFFSET here'#000+
  '07009_E_need to use $ here'#000+
  '07010_E_Cannot use multiple relocatable symbols'#000+
  '07011_E_Relocatable symbol can only be added'#000+
  '07012_E_Invalid constant expression'#000+
  '07013_E_R','elocatable symbol is not allowed'#000+
  '07014_E_Invalid reference syntax'#000+
  '07015_E_You can not reach $1 from that code'#000+
  '07016_E_Local symbols/labels aren'#039't allowed as references'#000+
  '07017_E_Invalid base and index register usage'#000+
  '07018_W_Possible error in ','object field handling'#000+
  '07019_E_Wrong scale factor specified'#000+
  '07020_E_Multiple index register usage'#000+
  '07021_E_Invalid operand type'#000+
  '07022_E_Invalid string as opcode operand: $1'#000+
  '07023_W_@CODE and @DATA not supported'#000+
  '07024_E_Null label references a','re not allowed'#000+
  '07025_E_Divide by zero in asm evaluator'#000+
  '07026_E_Illegal expression'#000+
  '07027_E_escape sequence ignored: $1'#000+
  '07028_E_Invalid symbol reference'#000+
  '07029_W_Fwait can cause emulation problems with emu387'#000+
  '07030_W_$1 without operand transla','ted into $1P'#000+
  '07031_W_ENTER instruction is not supported by Linux kernel'#000+
  '07032_W_Calling an overload function in assembler'#000+
  '07033_E_Unsupported symbol type for operand'#000+
  '07034_E_Constant value out of bounds'#000+
  '07035_E_Error converting decimal $1'#000+
  '0','7036_E_Error converting octal $1'#000+
  '07037_E_Error converting binary $1'#000+
  '07038_E_Error converting hexadecimal $1'#000+
  '07039_H_$1 translated to $2'#000+
  '07040_W_$1 is associated to an overloaded function'#000+
  '07041_E_Cannot use SELF outside a method'#000+
  '07042_E_Cann','ot use OLDEBP outside a nested procedure'#000+
  '07043_W_Procedures can'#039't return any value in asm code'#000+
  '07044_E_SEG not supported'#000+
  '07045_E_Size suffix and destination or source size do not match'#000+
  '07046_W_Size suffix and destination or source size do n','ot match'#000+
  '07047_E_Assembler syntax error'#000+
  '07048_E_Invalid combination of opcode and operands'#000+
  '07049_E_Assembler syntax error in operand'#000+
  '07050_E_Assembler syntax error in constant'#000+
  '07051_E_Invalid String expression'#000+
  '07052_W_constant with symbol $','1 for address which is not on a pointe'+
  'r'#000+
  '07053_E_Unrecognized opcode $1'#000+
  '07054_E_Invalid or missing opcode'#000+
  '07055_E_Invalid combination of prefix and opcode: $1'#000+
  '07056_E_Invalid combination of override and opcode: $1'#000+
  '07057_E_Too many operands o','n line'#000+
  '07058_W_NEAR ignored'#000+
  '07059_W_FAR ignored'#000+
  '07060_E_Duplicate local symbol $1'#000+
  '07061_E_Undefined local symbol $1'#000+
  '07062_E_Unknown label identifier $1'#000+
  '07063_E_Invalid register name'#000+
  '07064_E_Invalid floating point register name'#000+
  '07066_W_Modul','o not supported'#000+
  '07067_E_Invalid floating point constant $1'#000+
  '07068_E_Invalid floating point expression'#000+
  '07069_E_Wrong symbol type'#000+
  '07070_E_Cannot index a local var or parameter with a register'#000+
  '07071_E_Invalid segment override expression'#000+
  '07072_W','_Identifier $1 supposed external'#000+
  '07073_E_Strings not allowed as constants'#000+
  '07074_No type of variable specified'#000+
  '07075_E_assembler code not returned to text section'#000+
  '07076_E_Not a directive or local symbol $1'#000+
  '07077_E_Using a defined name as a l','ocal label'#000+
  '07078_E_Dollar token is used without an identifier'#000+
  '07079_W_32bit constant created for address'#000+
  '07080_N_.align is target specific, use .balign or .p2align'#000+
  '07081_E_Can'#039't access fields directly for parameters'#000+
  '07082_E_Can'#039't access fie','lds of objects/classes directly'#000+
  '07083_E_No size specified and unable to determine the size of the oper'+
  'ands'#000+
  '07084_E_Cannot use RESULT in this function'#000+
  '07086_W_"$1" without operand translated into "$1 %st,%st(1)"'#000+
  '07087_W_"$1 %st(n)" translate','d into "$1 %st,%st(n)"'#000+
  '07088_W_"$1 %st(n)" translated into "$1 %st(n),%st"'#000+
  '07089_E_Char < not allowed here'#000+
  '07090_E_Char > not allowed here'#000+
  '07093_W_ALIGN not supported'#000+
  '07094_E_Inc and Dec cannot be together'#000+
  '07095_E_Invalid reglist for movem'#000,
  '07096_E_Reglist invalid for opcode'#000+
  '07097_E_Higher cpu mode required ($1)'#000+
  '07098_W_No size specified and unable to determine the size of the oper'+
  'ands, using DWORD as default'#000+
  '07099_E_Syntax error while trying to parse a shifter operand'#000+
  '08000_F','_Too many assembler files'#000+
  '08001_F_Selected assembler output not supported'#000+
  '08002_F_Comp not supported'#000+
  '08003_F_Direct not support for binary writers'#000+
  '08004_E_Allocating of data is only allowed in bss section'#000+
  '08005_F_No binary writer selected'#000+
  '0','8006_E_Asm: Opcode $1 not in table'#000+
  '08007_E_Asm: $1 invalid combination of opcode and operands'#000+
  '08008_E_Asm: 16 Bit references not supported'#000+
  '08009_E_Asm: Invalid effective address'#000+
  '08010_E_Asm: Immediate or reference expected'#000+
  '08011_E_Asm: $1 v','alue exceeds bounds $2'#000+
  '08012_E_Asm: Short jump is out of range $1'#000+
  '08013_E_Asm: Undefined label $1'#000+
  '08014_E_Asm: Comp type not supported for this target'#000+
  '08015_E_Asm: Extended type not supported for this target'#000+
  '08016_E_Asm: Duplicate label $1'#000,
  '08017_E_Asm: Redefined label $1'#000+
  '08018_E_Asm: First defined here'#000+
  '08019_E_Asm: Invalid register $1'#000+
  '08020_E_Asm: 16 or 32 Bit references not supported'#000+
  '08021_E_Asm: 64 Bit operands not supported'#000+
  '09000_W_Source operating system redefined'#000+
  '09001_I','_Assembling (pipe) $1'#000+
  '09002_E_Can'#039't create assembler file: $1'#000+
  '09003_E_Can'#039't create object file: $1'#000+
  '09004_E_Can'#039't create archive file: $1'#000+
  '09005_E_Assembler $1 not found, switching to external assembling'#000+
  '09006_T_Using assembler: $1'#000+
  '09007_E_Er','ror while assembling exitcode $1'#000+
  '09008_E_Can'#039't call the assembler, error $1 switching to external a'+
  'ssembling'#000+
  '09009_I_Assembling $1'#000+
  '09010_I_Assembling with smartlinking $1'#000+
  '09011_W_Object $1 not found, Linking may fail !'#000+
  '09012_W_Library $1 no','t found, Linking may fail !'#000+
  '09013_E_Error while linking'#000+
  '09014_E_Can'#039't call the linker, switching to external linking'#000+
  '09015_I_Linking $1'#000+
  '09016_E_Util $1 not found, switching to external linking'#000+
  '09017_T_Using util $1'#000+
  '09018_E_Creation of Execu','tables not supported'#000+
  '09019_E_Creation of Dynamic/Shared Libraries not supported'#000+
  '09020_I_Closing script $1'#000+
  '09021_E_resource compiler not found, switching to external mode'#000+
  '09022_I_Compiling resource $1'#000+
  '09023_T_unit $1 can'#039't be statically link','ed, switching to smart l'+
  'inking'#000+
  '09024_T_unit $1 can'#039't be smart linked, switching to static linking'+
  #000+
  '09025_T_unit $1 can'#039't be shared linked, switching to static linkin'+
  'g'#000+
  '09026_E_unit $1 can'#039't be smart or static linked'#000+
  '09027_E_unit $1 can'#039't be s','hared or static linked'#000+
  '09028_D_Calling resource compiler "$1" with "$2" as command line'#000+
  '09128_F_Can'#039't post process executable $1'#000+
  '09129_F_Can'#039't open executable $1'#000+
  '09130_X_Size of Code: $1 bytes'#000+
  '09131_X_Size of initialized data: $1 bytes'#000+
  '0913','2_X_Size of uninitialized data: $1 bytes'#000+
  '09133_X_Stack space reserved: $1 bytes'#000+
  '09134_X_Stack space committed: $1 bytes'#000+
  '10000_T_Unitsearch: $1'#000+
  '10001_T_PPU Loading $1'#000+
  '10002_U_PPU Name: $1'#000+
  '10003_U_PPU Flags: $1'#000+
  '10004_U_PPU Crc: $1'#000+
  '10005_U_PPU',' Time: $1'#000+
  '10006_U_PPU File too short'#000+
  '10007_U_PPU Invalid Header (no PPU at the begin)'#000+
  '10008_U_PPU Invalid Version $1'#000+
  '10009_U_PPU is compiled for another processor'#000+
  '10010_U_PPU is compiled for an other target'#000+
  '10011_U_PPU Source: $1'#000+
  '10012_U_Wr','iting $1'#000+
  '10013_F_Can'#039't Write PPU-File'#000+
  '10014_F_Error reading PPU-File'#000+
  '10015_F_unexpected end of PPU-File'#000+
  '10016_F_Invalid PPU-File entry: $1'#000+
  '10017_F_PPU Dbx count problem'#000+
  '10018_E_Illegal unit name: $1'#000+
  '10019_F_Too much units'#000+
  '10020_F_Circular u','nit reference between $1 and $2'#000+
  '10021_F_Can'#039't compile unit $1, no sources available'#000+
  '10022_F_Can'#039't find unit $1'#000+
  '10023_W_Unit $1 was not found but $2 exists'#000+
  '10024_F_Unit $1 searched but $2 found'#000+
  '10025_W_Compiling the system unit requires the ','-Us switch'#000+
  '10026_F_There were $1 errors compiling module, stopping'#000+
  '10027_U_Load from $1 ($2) unit $3'#000+
  '10028_U_Recompiling $1, checksum changed for $2'#000+
  '10029_U_Recompiling $1, source found only'#000+
  '10030_U_Recompiling unit, static lib is older tha','n ppufile'#000+
  '10031_U_Recompiling unit, shared lib is older than ppufile'#000+
  '10032_U_Recompiling unit, obj and asm are older than ppufile'#000+
  '10033_U_Recompiling unit, obj is older than asm'#000+
  '10034_U_Parsing interface of $1'#000+
  '10035_U_Parsing implementation',' of $1'#000+
  '10036_U_Second load for unit $1'#000+
  '10037_U_PPU Check file $1 time $2'#000+
  '10040_W_Can'#039't recompile unit $1, but found modifed include files'#000+
  '10041_H_File $1 is newer than Release PPU file $2'#000+
  '10042_U_Using a unit which was not compiled with cor','rect FPU mode'#000+
  '10043_U_Loading interface units from $1'#000+
  '10044_U_Loading implementation units from $1'#000+
  '10045_U_Interface CRC changed for unit $1'#000+
  '10046_U_Implementation CRC changed for unit $1'#000+
  '10047_U_Finished compiling unit $1'#000+
  '10048_U_Add depen','dency of $1 to $2'#000+
  '10049_U_No reload, is caller: $1'#000+
  '10050_U_No reload, already in second compile: $1'#000+
  '10051_U_Flag for reload: $1'#000+
  '10052_U_Forced reloading'#000+
  '10053_U_Previous state of $1: $2'#000+
  '10054_U_Already compiling $1, setting second compile'#000+
  '1','0055_U_Loading unit $1'#000+
  '10056_U_Finished loading unit $1'#000+
  '10057_U_Registering new unit $1'#000+
  '10058_U_Re-resolving unit $1'#000+
  '10059_U_Skipping re-resolving unit $1, still loading used units'#000+
  '11000_O_$1 [options] <inputfile> [options]'#000+
  '11001_W_Only one',' source file supported'#000+
  '11002_W_DEF file can be created only for OS/2'#000+
  '11003_E_nested response files are not supported'#000+
  '11004_F_No source file name in command line'#000+
  '11005_N_No option inside $1 config file'#000+
  '11006_E_Illegal parameter: $1'#000+
  '11007_H_-','? writes help pages'#000+
  '11008_F_Too many config files nested'#000+
  '11009_F_Unable to open file $1'#000+
  '11010_D_Reading further options from $1'#000+
  '11011_W_Target is already set to: $1'#000+
  '11012_W_Shared libs not supported on DOS platform, reverting to static'+
  #000+
  '1101','3_F_too many IF(N)DEFs'#000+
  '11014_F_too many ENDIFs'#000+
  '11015_F_open conditional at the end of the file'#000+
  '11016_W_Debug information generation is not supported by this executab'+
  'le'#000+
  '11017_H_Try recompiling with -dGDB'#000+
  '11018_W_You are using the obsolete sw','itch $1'#000+
  '11019_W_You are using the obsolete switch $1, please use $2'#000+
  '11020_N_Switching assembler to default source writing assembler'#000+
  '11021_W_Assembler output selected "$1" is not compatible with "$2"'#000+
  '11022_W_"$1" assembler use forced'#000+
  '11026_T','_Reading options from file $1'#000+
  '11027_T_Reading options from environment $1'#000+
  '11028_D_Handling option "$1"'#000+
  '11029__*** press enter ***'#000+
  '11030_H_Start of reading config file $1'#000+
  '11031_H_End of reading config file $1'#000+
  '11032_D_interpreting option "$1"',#000+
  '11036_D_interpreting firstpass option "$1"'#000+
  '11033_D_interpreting file option "$1"'#000+
  '11034_D_Reading config file "$1"'#000+
  '11035_D_found source file name "$1"'#000+
  '11039_E_Unknown code page'#000+
  '11040_F_Config file $1 is a directory'#000+
  '11023_Free Pascal Compile','r version $FPCVERSION [$FPCDATE] for $FPCCP'+
  'U'#010+
  'Copyright (c) 1993-2005 by Florian Klaempfl'#000+
  '11024_Free Pascal Compiler version $FPCVERSION'#010+
  #010+
  'Compiler Date      : $FPCDATE'#010+
  'Compiler CPU Target: $FPCCPU'#010+
  #010+
  'Supported targets:'#010+
  '  $OSTARGETS'#010+
  #010+
  'Supported ','CPU instruction sets:'#010+
  '  $INSTRUCTIONSETS'#010+
  #010+
  'Supported FPU instruction sets:'#010+
  '  $FPUINSTRUCTIONSETS'#010+
  #010+
  'Supported Optimizations:'#010+
  '  $OPTIMIZATIONS'#010+
  #010+
  'This program comes under the GNU General Public Licence'#010+
  'For more information read COPYING.FPC'#010+
  #010+
  'Repor','t bugs,suggestions etc to:'#010+
  '                 [email protected]'#000+
  '11025_**0*_put + after a boolean switch option to enable it, - to disa'+
  'ble it'#010+
  '**1a_the compiler doesn'#039't delete the generated assembler file'#010+
  '**2al_list sourcecode lines in asse','mbler file'#010+
  '**2an_list node info in assembler file'#010+
  '*L2ap_use pipes instead of creating temporary assembler files'#010+
  '**2ar_list register allocation/release info in assembler file'#010+
  '**2at_list temp allocation/release info in assembler file'#010+
  '**1A<x>_','output format:'#010+
  '**2Adefault_use default assembler'#010+
  '3*2Aas_assemble using GNU AS'#010+
  '3*2Anasmcoff_coff (Go32v2) file using Nasm'#010+
  '3*2Anasmelf_elf32 (Linux) file using Nasm'#010+
  '3*2Anasmwin32_Win32 object file using Nasm'#010+
  '3*2Anasmwdosx_Win32/WDOSX object f','ile using Nasm'#010+
  '3*2Awasm_obj file using Wasm (Watcom)'#010+
  '3*2Anasmobj_obj file using Nasm'#010+
  '3*2Amasm_obj file using Masm (Microsoft)'#010+
  '3*2Atasm_obj file using Tasm (Borland)'#010+
  '3*2Aelf_elf32 (Linux) using internal writer'#010+
  '3*2Acoff_coff (Go32v2) using in','ternal writer'#010+
  '3*2Apecoff_pecoff (Win32) using internal writer'#010+
  '4*2Aas_assemble using GNU AS'#010+
  '6*2Aas_Unix o-file using GNU AS'#010+
  '6*2Agas_GNU Motorola assembler'#010+
  '6*2Amit_MIT Syntax (old GAS)'#010+
  '6*2Amot_Standard Motorola assembler'#010+
  'A*2Aas_assemble using',' GNU AS'#010+
  'P*2Aas_assemble using GNU AS'#010+
  'S*2Aas_assemble using GNU AS'#010+
  '**1b_generate browser info'#010+
  '**2bl_generate local symbol info'#010+
  '**1B_build all modules'#010+
  '**1C<x>_code generation options:'#010+
  '**2Cc<x>_set default calling convention to <x>'#010+
  '**2CD_creat','e also dynamic library (not supported)'#010+
  '**2Ce_Compilation with emulated floating point opcodes'#010+
  '**2Cf<x>_Select fpu instruction set to use, see fpc -i for possible va'+
  'lues'#010+
  '**2Cg_Generate PIC code'#010+
  '**2Ch<n>_<n> bytes heap (between 1023 and 67107','840)'#010+
  '**2Ci_IO-checking'#010+
  '**2Cn_omit linking stage'#010+
  '**2Co_check overflow of integer operations'#010+
  '**2Cp<x>_select instruction set, see fpc -i for possible values'#010+
  '**2Cr_range checking'#010+
  '**2CR_verify object method call validity'#010+
  '**2Cs<n>_set stack size',' to <n>'#010+
  '**2Ct_stack checking'#010+
  '**2CX_create also smartlinked library'#010+
  '**1d<x>_defines the symbol <x>'#010+
  '**1D_generate a DEF file'#010+
  '**2Dd<x>_set description to <x>'#010+
  '**2Dv<x>_set DLL version to <x>'#010+
  '*O2Dw_PM application'#010+
  '**1e<x>_set path to executable'#010+
  '*','*1E_same as -Cn'#010+
  '**1F<x>_set file names and paths:'#010+
  '**2Fa<x>[,y]_for a program load first units <x> and [y] before uses is'+
  ' parsed'#010+
  '**2Fc<x>_sets input codepage to <x>'#010+
  '**2FD<x>_sets the directory where to search for compiler utilities'#010+
  '**2Fe<x>_','redirect error output to <x>'#010+
  '**2FE<x>_set exe/unit output path to <x>'#010+
  '**2Fi<x>_adds <x> to include path'#010+
  '**2Fl<x>_adds <x> to library path'#010+
  '**2FL<x>_uses <x> as dynamic linker'#010+
  '**2Fo<x>_adds <x> to object path'#010+
  '**2Fr<x>_load error message file ','<x>'#010+
  '**2Fu<x>_adds <x> to unit path'#010+
  '**2FU<x>_set unit output path to <x>, overrides -FE'#010+
  '*g1g_generate debugger information:'#010+
  '*g2gc_generate checks for pointers'#010+
  '*g2gd_use dbx'#010+
  '*g2gg_use gsym'#010+
  '*g2gh_use heap trace unit (for memory leak debugging)',#010+
  '*g2gl_use line info unit to show more info for backtraces'#010+
  '*g2gv_generates programs traceable with valgrind'#010+
  '*g2gw_generate dwarf debugging info'#010+
  '**1i_information'#010+
  '**2iD_return compiler date'#010+
  '**2iV_return compiler version'#010+
  '**2iSO_return compiler',' OS'#010+
  '**2iSP_return compiler processor'#010+
  '**2iTO_return target OS'#010+
  '**2iTP_return target processor'#010+
  '**1I<x>_adds <x> to include path'#010+
  '**1k<x>_Pass <x> to the linker'#010+
  '**1l_write logo'#010+
  '**1M<x>_set language mode to <x>'#010+
  '**2Mfpc_free pascal dialect (defaul','t)'#010+
  '**2Mobjfpc_switch some Delphi 2 extensions on'#010+
  '**2Mdelphi_tries to be Delphi compatible'#010+
  '**2Mtp_tries to be TP/BP 7.0 compatible'#010+
  '**2Mgpc_tries to be gpc compatible'#010+
  '**2Mmacpas_tries to be compatible to the macintosh pascal dialects'#010+
  '**1n_don',#039't read the default config file'#010+
  '**1N<x>_node tree optimizations'#010+
  '**2Nu_unroll loops'#010+
  '**1o<x>_change the name of the executable produced to <x>'#010+
  '**1O<x>_optimizations:'#010+
  '**2O-_disable optimizations'#010+
  '**2O1_level 1 optimizations (quick and debugger ','friendly)'#010+
  '**2O2_level 2 optimizations (-O1 + quick optimizations)'#010+
  '**2O3_level 3 optimizations (-O2 + slow optimizations)'#010+
  '**2Oa<x>=<y>_set alignment'#010+
  '**2Oo[NO]<x>_enable or disable optimizations, see fpc -i for possible '+
  'values'#010+
  '**2Op<x>_set ta','rget cpu for optimizing, see fpc -i for possible valu'+
  'es'#010+
  '**2Os_generate smaller code'#010+
  '**1pg_generate profile code for gprof (defines FPC_PROFILE)'#010+
  '**1R<x>_assembler reading style:'#010+
  '**2Rdefault_use default assembler'#010+
  '3*2Ratt_read AT&T style assem','bler'#010+
  '3*2Rintel_read Intel style assembler'#010+
  '6*2RMOT_read motorola style assembler'#010+
  '**1S<x>_syntax options:'#010+
  '**2S2_same as -Mobjfpc'#010+
  '**2Sc_supports operators like C (*=,+=,/= and -=)'#010+
  '**2Sa_include assertion code.'#010+
  '**2Sd_same as -Mdelphi'#010+
  '**2Se<x>_e','rror options. <x> is a combination of the following:'#010+
  '**3*_<n> : compiler stops after the <n> errors (default is 1)'#010+
  '**3*_w : compiler stops also after warnings'#010+
  '**3*_n : compiler stops also after notes'#010+
  '**3*_h : compiler stops also after hints',#010+
  '**2Sg_allow LABEL and GOTO'#010+
  '**2Sh_Use ansistrings'#010+
  '**2Si_support C++ styled INLINE'#010+
  '**2Sk_load fpcylix unit'#010+
  '**2SI<x>_set interface style to <x>'#010+
  '**3SIcom_COM compatible interface (default)'#010+
  '**3SIcorba_CORBA compatible interface'#010+
  '**2Sm_support ma','cros like C (global)'#010+
  '**2So_same as -Mtp'#010+
  '**2Sp_same as -Mgpc'#010+
  '**2Ss_constructor name must be init (destructor must be done)'#010+
  '**2St_allow static keyword in objects'#010+
  '**1s_don'#039't call assembler and linker'#010+
  '**2sh_Generate script to link on host'#010+
  '**2st','_Generate script to link on target'#010+
  '**2sr_Skip register allocation phase (use with -alr)'#010+
  '**1T<x>_Target operating system:'#010+
  '3*2Temx_OS/2 via EMX (including EMX/RSX extender)'#010+
  '3*2Tfreebsd_FreeBSD'#010+
  '3*2Tgo32v2_Version 2 of DJ Delorie DOS extender'#010+
  '3','*2Tlinux_Linux'#010+
  '3*2Tnetbsd_NetBSD'#010+
  '3*2Tnetware_Novell Netware Module (clib)'#010+
  '3*2Tnetwlibc_Novell Netware Module (libc)'#010+
  '3*2Topenbsd_OpenBSD'#010+
  '3*2Tos2_OS/2 / eComStation'#010+
  '3*2Tsunos_SunOS/Solaris'#010+
  '3*2Twatcom_Watcom compatible DOS extender'#010+
  '3*2Twdosx_W','DOSX DOS extender'#010+
  '3*2Twin32_Windows 32 Bit'#010+
  '3*2Twince_Windows CE'#010+
  '4*2Tlinux_Linux'#010+
  '6*2Tamiga_Commodore Amiga'#010+
  '6*2Tatari_Atari ST/STe/TT'#010+
  '6*2Tlinux_Linux/m68k'#010+
  '6*2Tmacos_Macintosh m68k (not supported)'#010+
  '6*2Tpalmos_PalmOS'#010+
  'A*2Tlinux_Linux'#010+
  'A*2Twince_Wi','ndows CE'#010+
  'P*2Tamiga_AmigaOS on PowerPC'#010+
  'P*2Tdarwin_Darwin and MacOS X on PowerPC'#010+
  'P*2Tlinux_Linux on PowerPC'#010+
  'P*2Tmacos_MacOS (classic) on PowerPC'#010+
  'P*2Tmorphos_MorphOS'#010+
  'S*2Tlinux_Linux'#010+
  '**1u<x>_undefines the symbol <x>'#010+
  '**1U_unit options:'#010+
  '**2Un_don',#039't check the unit name'#010+
  '**2Ur_generate release unit files'#010+
  '**2Us_compile a system unit'#010+
  '**1v<x>_Be verbose. <x> is a combination of the following letters:'#010+
  '**2*_e : Show errors (default)       0 : Show nothing (except errors)'#010+
  '**2*_w : Show warn','ings               u : Show unit info'#010+
  '**2*_n : Show notes                  t : Show tried/used files'#010+
  '**2*_h : Show hints                  c : Show conditionals'#010+
  '**2*_i : Show general info           d : Show debug info'#010+
  '**2*_l : Show linenumbe','rs            r : Rhide/GCC compatibility mod'+
  'e'#010+
  '**2*_a : Show everything             x : Executable info (Win32 only)'#010+
  '**2*_b : Write file names messages with full path'#010+
  '**2*_v : write fpcdebug.txt with     p : Write tree.log with parse tre'+
  'e'#010+
  '*','*2*_    lots of debugging info'#010+
  '3*1W<x>_Win32-like target options'#010+
  '3*2WB_Create a relocatable image'#010+
  '3*2WB<x>_Set Image base to Hexadecimal <x> value'#010+
  '3*2WC_Specify console type application'#010+
  '3*2WD_Use DEFFILE to export functions of DLL or EXE'#010+
  '3*','2WF_Specify full-screen type application (OS/2 only)'#010+
  '3*2WG_Specify graphic type application'#010+
  '3*2WN_Do not generate relocation code (necessary for debugging)'#010+
  '3*2WR_Generate relocation code'#010+
  'P*2WC_Specify console type application (MacOS only)'#010+
  'P','*2WG_Specify graphic type application (MacOS only)'#010+
  'P*2WT_Specify tool type application (MPW tool, MacOS only)'#010+
  '**1X_executable options:'#010+
  '**2Xc_pass --shared to the linker (Unix only)'#010+
  '**2Xd_don'#039't use standard library search path (needed for cr','oss c'+
  'ompile)'#010+
  '**2XD_try to link units dynamic          (defines FPC_LINK_DYNAMIC)'#010+
  '**2Xm_generate link map'#010+
  '**2XM<x>_set the name of the '#039'main'#039' program routine (default i'+
  's '#039'main'#039')'#010+
  '**2XP<x>_prepend the binutils names with the prefix <x>'#010+
  '**2Xr<x','>_set library search path to <x> (needed for cross compile)'#010+
  '**2Xs_strip all symbols from executable'#010+
  '**2XS_try to link units static (default) (defines FPC_LINK_STATIC)'#010+
  '**2Xt_link with static libraries (-static is passed to linker)'#010+
  '**2XX_try ','to link units smart            (defines FPC_LINK_SMART)'#010+
  '**1*_'#010+
  '**1?_shows this help'#010+
  '**1h_shows this help without waiting'#000
);