freepascal.compiler/rtl/i386/math.inc

{
    This file is part of the Free Pascal run time library.
    Copyright (c) 1999-2001 by the Free Pascal development team

    Implementation of mathematical routines (for extended type)

    See the file COPYING.FPC, included in this distribution,
    for details about the copyright.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

 **********************************************************************}
{-------------------------------------------------------------------------
 Using functions from AMath/DAMath libraries, which are covered by the
 following license:

 (C) Copyright 2009-2013 Wolfgang Ehrhardt

 This software is provided 'as-is', without any express or implied warranty.
 In no event will the authors be held liable for any damages arising from
 the use of this software.

 Permission is granted to anyone to use this software for any purpose,
 including commercial applications, and to alter it and redistribute it
 freely, subject to the following restrictions:

 1. The origin of this software must not be misrepresented; you must not
    claim that you wrote the original software. If you use this software in
    a product, an acknowledgment in the product documentation would be
    appreciated but is not required.

 2. Altered source versions must be plainly marked as such, and must not be
    misrepresented as being the original software.

 3. This notice may not be removed or altered from any source distribution.
----------------------------------------------------------------------------}

{****************************************************************************
                            FPU Control word
 ****************************************************************************}

{$push}
{$codealign constmin=16}
const
  FPC_ABSMASK_SINGLE: array[0..1] of qword=($7fffffff7fffffff,$7fffffff7fffffff); cvar; public;
  FPC_ABSMASK_DOUBLE: array[0..1] of qword=($7fffffffffffffff,$7fffffffffffffff); cvar; public;
{$pop}

    procedure Set8087CW(cw:word);
      begin
        { pic-safe ; cw will not be a regvar because it's accessed from }
        { assembler                                                     }
        default8087cw:=cw;
        asm
          fnclex
          fldcw cw
        end;
      end;


    function Get8087CW:word;assembler;
      asm
        pushl $0
        fnstcw (%esp)
        popl %eax
      end;


    procedure SetMXCSR(w : dword);
      begin
        defaultmxcsr:=w;
    {$ifndef OLD_ASSEMBLER}
        asm
          ldmxcsr w
        end;
    {$else}
        { Use convoluted code to avoid relocation on
          ldmxcsr opcode, and use .byte version }
        asm
          mov     w,%eax
          subl    $4,%esp
          mov     %eax,(%esp)
          //ldmxcsr (%esp)
          .byte   0x0f,0xae,0x14,0x24
          addl    $4,%esp
        end;
    {$endif OLD_ASSEMBLER}
      end;


    function GetMXCSR : dword;
      var
        _w : dword;
      begin
    {$ifndef OLD_ASSEMBLER}
        asm
          stmxcsr _w
        end;
    {$else}
        asm
        { Use convoluted code to avoid relocation on
          ldmxcsr opcode, and use .byte version }
          subl    $4,%esp
          //stmxcsr (%esp)
          .byte   0x0f,0xae,0x14,0x24
          mov     (%esp),%eax
          addl    $4,%esp
          mov     %eax,_w
        end;
    {$endif OLD_ASSEMBLER}
        result:=_w;
      end;


    function GetNativeFPUControlWord: TNativeFPUControlWord; {$if defined(SYSTEMINLINE)}inline;{$endif}
      begin
        result.cw8087:=Get8087CW;
        if has_sse_support then
          result.MXCSR:=GetMXCSR
        else
          result.MXCSR:=-1;
      end;


    procedure SetNativeFPUControlWord(const cw: TNativeFPUControlWord); {$if defined(SYSTEMINLINE)}inline;{$endif}
      begin
        Set8087CW(cw.cw8087);
        if cw.MXCSR<>-1 then
          SetMXCSR(cw.MXCSR);
      end;


    procedure SetSSECSR(w : dword);
      begin
        SetMXCSR(w);
      end;

    function GetSSECSR: dword;
      begin
        result:=GetMXCSR;
      end;

{****************************************************************************
                       EXTENDED data type routines
 ****************************************************************************}

    {$define FPC_SYSTEM_HAS_ABS}
    function fpc_abs_real(d : ValReal) : ValReal;compilerproc;
    begin
      { Function is handled internal in the compiler }
      runerror(207);
      result:=0;
    end;
    {$define FPC_SYSTEM_HAS_SQR}
    function fpc_sqr_real(d : ValReal) : ValReal;compilerproc;
    begin
      { Function is handled internal in the compiler }
      runerror(207);
      result:=0;
    end;
    {$define FPC_SYSTEM_HAS_SQRT}
    function fpc_sqrt_real(d : ValReal) : ValReal;compilerproc;
    begin
      { Function is handled internal in the compiler }
      runerror(207);
      result:=0;
    end;
    {$define FPC_SYSTEM_HAS_ARCTAN}
    function fpc_arctan_real(d : ValReal) : ValReal;compilerproc;
    begin
      { Function is handled internal in the compiler }
      runerror(207);
      result:=0;
    end;
    {$define FPC_SYSTEM_HAS_LN}
    function fpc_ln_real(d : ValReal) : ValReal;compilerproc;
    begin
      { Function is handled internal in the compiler }
      runerror(207);
      result:=0;
    end;
    {$define FPC_SYSTEM_HAS_SIN}
    function fpc_sin_real(d : ValReal) : ValReal;compilerproc;
    begin
      { Function is handled internal in the compiler }
      runerror(207);
      result:=0;
    end;
    {$define FPC_SYSTEM_HAS_COS}
    function fpc_cos_real(d : ValReal) : ValReal;compilerproc;
    begin
      { Function is handled internal in the compiler }
      runerror(207);
      result:=0;
    end;


  {$if not defined(FPC_PIC) or defined(OLD_ASSEMBLER)}
    {$ifndef OPENBSD}
      {$define DISABLE_PIC_IN_EXP_REAL}
    {$endif ndef OPENBSD}
  {$endif}
  {$define FPC_SYSTEM_HAS_EXP}
    { exp function adapted from AMath library (C) Copyright 2009-2013 Wolfgang Ehrhardt
      * translated into AT&T syntax
      + PIC support
      * return +Inf/0 for +Inf/-Inf input, instead of NaN }
    function fpc_exp_real(d : ValReal) : ValReal;assembler;nostackframe;compilerproc;
      { [esp + 4 .. esp + 13] = d }
      const
        ln2hi: double=6.9314718036912382E-001;
        ln2lo: double=1.9082149292705877E-010;
        two:   single=2.0;
        half:  single=0.5;
      asm
{$ifndef DISABLE_PIC_IN_EXP_REAL}
        call     .LPIC
.LPIC:
        pop         %ecx
{$endif not DISABLE_PIC_IN_EXP_REAL}
        fldt        4(%esp)
        fldl2e
        fmul        %st(1),%st        { z = d * log2(e) }
        frndint
      { Calculate frac(z) using modular arithmetic to avoid precision loss. }
        fldl        ln2hi{$ifndef DISABLE_PIC_IN_EXP_REAL}-.LPIC(%ecx){$endif}
        fmul        %st(1),%st
        fsubrp      %st,%st(2)
        fldl        ln2lo{$ifndef DISABLE_PIC_IN_EXP_REAL}-.LPIC(%ecx){$endif}
        fmul        %st(1),%st
        fsubrp      %st,%st(2)
        fxch        %st(1)            { (d-int(z)*ln2_hi)-int(z)*ln2_lo }
        fldl2e
        fmulp       %st,%st(1)        { frac(z) }

      { The above code can result in |frac(z)|>1, particularly when rounding mode
        is not "round to nearest". f2xm1 is undefined in this case, so a check
        is necessary. Furthermore, frac(z) evaluates to NaN for d=+-Inf. }
        fsts        4(%esp)           { Save frac(z) as single. Usually a lot faster than saving 80-bit extended. }
        mov         4(%esp), %eax
        shr         $23, %eax
        movzbl      %al, %eax
        sub         $127, %eax        { eax = single(frac(z)) exponent. If < 0, |frac(z)| < 1. }
        jae         .LFracOutOfRange
        f2xm1
.LGot2PowFracZM1:
        fld1
        faddp       %st,%st(1)
        fscale
        fstp        %st(1)
        ret         $12

.LFracOutOfRange:
        jne         .LForceZeroFrac   { Safeguard against |frac(z)| ≥ 2, or Inf / NaN. If single(frac(z)) exponent is 0, 1 ≤ |frac(z)| < 2. }

        { Calculate 2**frac(z)-1 as N*(N+2), where N=2**(frac(z)/2)-1 }
        fmuls       half{$ifndef DISABLE_PIC_IN_EXP_REAL}-.LPIC(%ecx){$endif}
        f2xm1
        fld         %st
        fadds       two{$ifndef DISABLE_PIC_IN_EXP_REAL}-.LPIC(%ecx){$endif}
        fmulp       %st,%st(1)
        jmp         .LGot2PowFracZM1

.LForceZeroFrac:
        fstp        %st
        fld1
        fscale
        fstp        %st(1)
     end;


    {$define FPC_SYSTEM_HAS_FRAC}
    function fpc_frac_real(d : ValReal) : ValReal;assembler;nostackframe;compilerproc;
      { [esp + 4 .. esp + 13] = d. }
      asm
        { Extended exponent bias is 16383 and mantissa is 63 bits not counting explicit 1. In memory:

          bit 0, byte 0       bit 64, byte 8
          ↓                   ↓
          M0 M1 ... M61 M62 1 E14 E13 ... E1 E0 S
                              └───────────────┘
                              E = 16383 + exponent

          Numbers with E < 16383 have abs < 1 so frac = itself;
          Numbers with E ≥ 16383 + 63 = 16446 have frac = 0, except for E = 32767 (Inf, NaN) that have frac = NaN.

          Numbers with 16383 ≤ E < 16383 + 63 have (16383 + 63 - E) mantissa bits after the point.
          Zero them manually instead of changing and restoring the control word.
          FISTTP + FILD is faster but FISTTP is a SSE3 instruction despite its appearance. :( }

        movzwl  12(%esp), %ecx
        and     $0x7FFF, %ecx { ecx = E }
        sub     $16383, %ecx { ecx = E - 16383 = exponent. }
        jb      .LLoad { exponent < 0 ⇒ abs(number) < 1 ⇒ frac is the number itself. }
        sub     $63, %ecx
        jae     .LZeroOrSpecial

        fldt    4(%esp)
        neg     %ecx { ecx = 63 - exponent = number of mantissa bits after point = number of bottom mantissa bits that must be zeroed. }
        or      $-1, %eax { eax = all ones, so “eax shl N” will have N bottom zeros. }
        shl     %cl, %eax { This shifts by ecx mod 32. }
        shr     $5, %ecx { 0 if first 32 bits must be masked by eax, 1 if second 32 bits must be masked by eax and first 32 bits must be zeroed. }
        and     4(%esp,%ecx,4), %eax
        movl    $0, 4(%esp) { If ecx = 0, gets instantly overwritten instead of branching. }
        mov     %eax, 4(%esp,%ecx,4)
        fldt    4(%esp)
        fsubrp  %st(0), %st(1) { For some reason this matches fsubP st(1), st(0) in Intel syntax. o_O }
        ret     $12

.LLoad:
        fldt    4(%esp)
        ret     $12

.LZeroOrSpecial:
        cmp     $(16384 - 63), %ecx { E = MAX, number is Inf/NaN? }
        je      .LInfNaN
        fldz
        ret     $12

.LInfNaN:
        { Bother a bit to explicitly handle infinity instead of jumping to fldt + fsubrp + ret that would conveniently substract Inf/NaN from itself and give NaN.
          Such subtracting is likely to be very slow even on newer CPUs whose SSE units handle infinities/NaNs at full speed.
          I’d prefer frac(Inf) = 0, but x86-64 version returns NaN too. }
        mov     8(%esp), %eax { Check if mantissa bits 0:62 are all zeros. }
        shl     $1, %eax { Ignore bit 63. }
        or      4(%esp), %eax
        jnz     .LLoad { Not all zeros, NaN; return itself. }
        movl    $0xFFC00000, 4(%esp) { 32-bit qNaN that, when loaded with flds on my CPU, produces the same bitpattern as actual subtraction of two infinities. ^^" }
        flds    4(%esp)
      end;


    {$define FPC_SYSTEM_HAS_INT}
    function fpc_int_real(d : ValReal) : ValReal;assembler;nostackframe;compilerproc;
      { [esp + 4 .. esp + 13] = d. }
      asm
        { See fpc_frac_real. }
        movzwl  12(%esp), %ecx
        and     $0x7FFF, %ecx { ecx = E }
        sub     $16383, %ecx { ecx = E - 16383 = exponent. }
        jb      .LZero { exponent < 0 ⇒ abs(number) < 1 ⇒ int is 0 (assuming its sign is not important). }
        sub     $63, %ecx
        jae     .LReload { exponent > 63 ⇒ the number is either too large to have a fraction or an Inf/NaN ⇒ int is the number itself. }

        neg     %ecx { ecx = 63 - exponent = number of mantissa bits after point = number of bottom mantissa bits that must be zeroed. }
        or      $-1, %eax { eax = all ones, so “eax shl N” will have N bottom zeros. }
        shl     %cl, %eax { This shifts by ecx mod 32. }
        shr     $5, %ecx { 0 if first 32 bits must be masked by eax, 1 if second 32 bits must be masked by eax and first 32 bits must be zeroed. }
        and     4(%esp,%ecx,4), %eax
        movl    $0, 4(%esp) { If ecx = 0, gets instantly overwritten instead of branching. }
        mov     %eax, 4(%esp,%ecx,4)
.LReload:
        fldt    4(%esp)
        ret     $12
.LZero:
        fldz
      end;


    {$define FPC_SYSTEM_HAS_TRUNC}
    function fpc_trunc_real(d : ValReal) : int64;assembler;compilerproc;
      asm
        subl $12,%esp
        fldt d
        fnstcw (%esp)
        movw (%esp),%cx
        orw $0x0f00,(%esp)
        fldcw (%esp)
        movw %cx,(%esp)
        fistpq 4(%esp)
        fldcw (%esp)
        fwait
        movl 4(%esp),%eax
        movl 8(%esp),%edx
      end;


    {$define FPC_SYSTEM_HAS_ROUND}
    { keep for bootstrapping with 2.0.x }
    function fpc_round_real(d : ValReal) : int64;compilerproc;assembler;
      var
        res   : int64;
      asm
        fldt d
        fistpq res
        fwait
        movl res,%eax
        movl res+4,%edx
      end;