Merge pull request #63440 from YuriSizov/joints-six-degrees-of-order

scene/3d/joint_3d.cpp

@@ -737,7 +737,8 @@ void Generic6DOFJoint3D::_bind_methods() {
 	ClassDB::bind_method(D_METHOD("set_flag_z", "flag", "value"), &Generic6DOFJoint3D::set_flag_z);
 	ClassDB::bind_method(D_METHOD("get_flag_z", "flag"), &Generic6DOFJoint3D::get_flag_z);
 
-	// X
+	ADD_GROUP("Linear Limit", "linear_limit_");
+
 	ADD_PROPERTYI(PropertyInfo(Variant::BOOL, "linear_limit_x/enabled"), "set_flag_x", "get_flag_x", FLAG_ENABLE_LINEAR_LIMIT);
 	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "linear_limit_x/upper_distance", PROPERTY_HINT_NONE, "suffix:m"), "set_param_x", "get_param_x", PARAM_LINEAR_UPPER_LIMIT);
 	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "linear_limit_x/lower_distance", PROPERTY_HINT_NONE, "suffix:m"), "set_param_x", "get_param_x", PARAM_LINEAR_LOWER_LIMIT);
@@ -745,15 +746,53 @@ void Generic6DOFJoint3D::_bind_methods() {
 	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "linear_limit_x/restitution", PROPERTY_HINT_RANGE, "0.01,16,0.01"), "set_param_x", "get_param_x", PARAM_LINEAR_RESTITUTION);
 	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "linear_limit_x/damping", PROPERTY_HINT_RANGE, "0.01,16,0.01"), "set_param_x", "get_param_x", PARAM_LINEAR_DAMPING);
 
+	ADD_PROPERTYI(PropertyInfo(Variant::BOOL, "linear_limit_y/enabled"), "set_flag_y", "get_flag_y", FLAG_ENABLE_LINEAR_LIMIT);
+	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "linear_limit_y/upper_distance", PROPERTY_HINT_NONE, "suffix:m"), "set_param_y", "get_param_y", PARAM_LINEAR_UPPER_LIMIT);
+	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "linear_limit_y/lower_distance", PROPERTY_HINT_NONE, "suffix:m"), "set_param_y", "get_param_y", PARAM_LINEAR_LOWER_LIMIT);
+	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "linear_limit_y/softness", PROPERTY_HINT_RANGE, "0.01,16,0.01"), "set_param_y", "get_param_y", PARAM_LINEAR_LIMIT_SOFTNESS);
+	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "linear_limit_y/restitution", PROPERTY_HINT_RANGE, "0.01,16,0.01"), "set_param_y", "get_param_y", PARAM_LINEAR_RESTITUTION);
+	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "linear_limit_y/damping", PROPERTY_HINT_RANGE, "0.01,16,0.01"), "set_param_y", "get_param_y", PARAM_LINEAR_DAMPING);
+
+	ADD_PROPERTYI(PropertyInfo(Variant::BOOL, "linear_limit_z/enabled"), "set_flag_z", "get_flag_z", FLAG_ENABLE_LINEAR_LIMIT);
+	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "linear_limit_z/upper_distance", PROPERTY_HINT_NONE, "suffix:m"), "set_param_z", "get_param_z", PARAM_LINEAR_UPPER_LIMIT);
+	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "linear_limit_z/lower_distance", PROPERTY_HINT_NONE, "suffix:m"), "set_param_z", "get_param_z", PARAM_LINEAR_LOWER_LIMIT);
+	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "linear_limit_z/softness", PROPERTY_HINT_RANGE, "0.01,16,0.01"), "set_param_z", "get_param_z", PARAM_LINEAR_LIMIT_SOFTNESS);
+	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "linear_limit_z/restitution", PROPERTY_HINT_RANGE, "0.01,16,0.01"), "set_param_z", "get_param_z", PARAM_LINEAR_RESTITUTION);
+	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "linear_limit_z/damping", PROPERTY_HINT_RANGE, "0.01,16,0.01"), "set_param_z", "get_param_z", PARAM_LINEAR_DAMPING);
+
+	ADD_GROUP("Linear Motor", "linear_motor_");
+
 	ADD_PROPERTYI(PropertyInfo(Variant::BOOL, "linear_motor_x/enabled"), "set_flag_x", "get_flag_x", FLAG_ENABLE_LINEAR_MOTOR);
 	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "linear_motor_x/target_velocity", PROPERTY_HINT_NONE, "suffix:m/s"), "set_param_x", "get_param_x", PARAM_LINEAR_MOTOR_TARGET_VELOCITY);
 	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "linear_motor_x/force_limit"), "set_param_x", "get_param_x", PARAM_LINEAR_MOTOR_FORCE_LIMIT);
 
+	ADD_PROPERTYI(PropertyInfo(Variant::BOOL, "linear_motor_y/enabled"), "set_flag_y", "get_flag_y", FLAG_ENABLE_LINEAR_MOTOR);
+	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "linear_motor_y/target_velocity", PROPERTY_HINT_NONE, "suffix:m/s"), "set_param_y", "get_param_y", PARAM_LINEAR_MOTOR_TARGET_VELOCITY);
+	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "linear_motor_y/force_limit"), "set_param_y", "get_param_y", PARAM_LINEAR_MOTOR_FORCE_LIMIT);
+
+	ADD_PROPERTYI(PropertyInfo(Variant::BOOL, "linear_motor_z/enabled"), "set_flag_z", "get_flag_z", FLAG_ENABLE_LINEAR_MOTOR);
+	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "linear_motor_z/target_velocity", PROPERTY_HINT_NONE, "suffix:m/s"), "set_param_z", "get_param_z", PARAM_LINEAR_MOTOR_TARGET_VELOCITY);
+	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "linear_motor_z/force_limit"), "set_param_z", "get_param_z", PARAM_LINEAR_MOTOR_FORCE_LIMIT);
+
+	ADD_GROUP("Linear Spring", "linear_spring_");
+
 	ADD_PROPERTYI(PropertyInfo(Variant::BOOL, "linear_spring_x/enabled"), "set_flag_x", "get_flag_x", FLAG_ENABLE_LINEAR_SPRING);
 	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "linear_spring_x/stiffness"), "set_param_x", "get_param_x", PARAM_LINEAR_SPRING_STIFFNESS);
 	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "linear_spring_x/damping"), "set_param_x", "get_param_x", PARAM_LINEAR_SPRING_DAMPING);
 	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "linear_spring_x/equilibrium_point"), "set_param_x", "get_param_x", PARAM_LINEAR_SPRING_EQUILIBRIUM_POINT);
 
+	ADD_PROPERTYI(PropertyInfo(Variant::BOOL, "linear_spring_y/enabled"), "set_flag_y", "get_flag_y", FLAG_ENABLE_LINEAR_SPRING);
+	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "linear_spring_y/stiffness"), "set_param_y", "get_param_y", PARAM_LINEAR_SPRING_STIFFNESS);
+	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "linear_spring_y/damping"), "set_param_y", "get_param_y", PARAM_LINEAR_SPRING_DAMPING);
+	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "linear_spring_y/equilibrium_point"), "set_param_y", "get_param_y", PARAM_LINEAR_SPRING_EQUILIBRIUM_POINT);
+
+	ADD_PROPERTYI(PropertyInfo(Variant::BOOL, "linear_spring_z/enabled"), "set_flag_z", "get_flag_z", FLAG_ENABLE_LINEAR_SPRING);
+	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "linear_spring_z/stiffness"), "set_param_z", "get_param_z", PARAM_LINEAR_SPRING_STIFFNESS);
+	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "linear_spring_z/damping"), "set_param_z", "get_param_z", PARAM_LINEAR_SPRING_DAMPING);
+	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "linear_spring_z/equilibrium_point"), "set_param_z", "get_param_z", PARAM_LINEAR_SPRING_EQUILIBRIUM_POINT);
+
+	ADD_GROUP("Angular Limit", "angular_limit_");
+
 	ADD_PROPERTYI(PropertyInfo(Variant::BOOL, "angular_limit_x/enabled"), "set_flag_x", "get_flag_x", FLAG_ENABLE_ANGULAR_LIMIT);
 	ADD_PROPERTY(PropertyInfo(Variant::FLOAT, "angular_limit_x/upper_angle", PROPERTY_HINT_RANGE, "-180,180,0.01"), "_set_angular_hi_limit_x", "_get_angular_hi_limit_x");
 	ADD_PROPERTY(PropertyInfo(Variant::FLOAT, "angular_limit_x/lower_angle", PROPERTY_HINT_RANGE, "-180,180,0.01"), "_set_angular_lo_limit_x", "_get_angular_lo_limit_x");
@@ -763,68 +802,15 @@ void Generic6DOFJoint3D::_bind_methods() {
 	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "angular_limit_x/force_limit"), "set_param_x", "get_param_x", PARAM_ANGULAR_FORCE_LIMIT);
 	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "angular_limit_x/erp"), "set_param_x", "get_param_x", PARAM_ANGULAR_ERP);
 
-	ADD_PROPERTYI(PropertyInfo(Variant::BOOL, "angular_motor_x/enabled"), "set_flag_x", "get_flag_x", FLAG_ENABLE_MOTOR);
-	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "angular_motor_x/target_velocity"), "set_param_x", "get_param_x", PARAM_ANGULAR_MOTOR_TARGET_VELOCITY);
-	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "angular_motor_x/force_limit"), "set_param_x", "get_param_x", PARAM_ANGULAR_MOTOR_FORCE_LIMIT);
-
-	ADD_PROPERTYI(PropertyInfo(Variant::BOOL, "angular_spring_x/enabled"), "set_flag_x", "get_flag_x", FLAG_ENABLE_ANGULAR_SPRING);
-	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "angular_spring_x/stiffness"), "set_param_x", "get_param_x", PARAM_ANGULAR_SPRING_STIFFNESS);
-	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "angular_spring_x/damping"), "set_param_x", "get_param_x", PARAM_ANGULAR_SPRING_DAMPING);
-	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "angular_spring_x/equilibrium_point"), "set_param_x", "get_param_x", PARAM_ANGULAR_SPRING_EQUILIBRIUM_POINT);
-
-	// Y
-	ADD_PROPERTYI(PropertyInfo(Variant::BOOL, "linear_limit_y/enabled"), "set_flag_y", "get_flag_y", FLAG_ENABLE_LINEAR_LIMIT);
-	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "linear_limit_y/upper_distance", PROPERTY_HINT_NONE, "suffix:m"), "set_param_y", "get_param_y", PARAM_LINEAR_UPPER_LIMIT);
-	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "linear_limit_y/lower_distance", PROPERTY_HINT_NONE, "suffix:m"), "set_param_y", "get_param_y", PARAM_LINEAR_LOWER_LIMIT);
-	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "linear_limit_y/softness", PROPERTY_HINT_RANGE, "0.01,16,0.01"), "set_param_y", "get_param_y", PARAM_LINEAR_LIMIT_SOFTNESS);
-	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "linear_limit_y/restitution", PROPERTY_HINT_RANGE, "0.01,16,0.01"), "set_param_y", "get_param_y", PARAM_LINEAR_RESTITUTION);
-	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "linear_limit_y/damping", PROPERTY_HINT_RANGE, "0.01,16,0.01"), "set_param_y", "get_param_y", PARAM_LINEAR_DAMPING);
-
-	ADD_PROPERTYI(PropertyInfo(Variant::BOOL, "linear_motor_y/enabled"), "set_flag_y", "get_flag_y", FLAG_ENABLE_LINEAR_MOTOR);
-	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "linear_motor_y/target_velocity", PROPERTY_HINT_NONE, "suffix:m/s"), "set_param_y", "get_param_y", PARAM_LINEAR_MOTOR_TARGET_VELOCITY);
-	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "linear_motor_y/force_limit"), "set_param_y", "get_param_y", PARAM_LINEAR_MOTOR_FORCE_LIMIT);
-
-	ADD_PROPERTYI(PropertyInfo(Variant::BOOL, "linear_spring_y/enabled"), "set_flag_y", "get_flag_y", FLAG_ENABLE_LINEAR_SPRING);
-	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "linear_spring_y/stiffness"), "set_param_y", "get_param_y", PARAM_LINEAR_SPRING_STIFFNESS);
-	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "linear_spring_y/damping"), "set_param_y", "get_param_y", PARAM_LINEAR_SPRING_DAMPING);
-	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "linear_spring_y/equilibrium_point"), "set_param_y", "get_param_y", PARAM_LINEAR_SPRING_EQUILIBRIUM_POINT);
-
 	ADD_PROPERTYI(PropertyInfo(Variant::BOOL, "angular_limit_y/enabled"), "set_flag_y", "get_flag_y", FLAG_ENABLE_ANGULAR_LIMIT);
 	ADD_PROPERTY(PropertyInfo(Variant::FLOAT, "angular_limit_y/upper_angle", PROPERTY_HINT_RANGE, "-180,180,0.01"), "_set_angular_hi_limit_y", "_get_angular_hi_limit_y");
 	ADD_PROPERTY(PropertyInfo(Variant::FLOAT, "angular_limit_y/lower_angle", PROPERTY_HINT_RANGE, "-180,180,0.01"), "_set_angular_lo_limit_y", "_get_angular_lo_limit_y");
-
 	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "angular_limit_y/softness", PROPERTY_HINT_RANGE, "0.01,16,0.01"), "set_param_y", "get_param_y", PARAM_ANGULAR_LIMIT_SOFTNESS);
 	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "angular_limit_y/restitution", PROPERTY_HINT_RANGE, "0.01,16,0.01"), "set_param_y", "get_param_y", PARAM_ANGULAR_RESTITUTION);
 	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "angular_limit_y/damping", PROPERTY_HINT_RANGE, "0.01,16,0.01"), "set_param_y", "get_param_y", PARAM_ANGULAR_DAMPING);
 	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "angular_limit_y/force_limit"), "set_param_y", "get_param_y", PARAM_ANGULAR_FORCE_LIMIT);
 	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "angular_limit_y/erp"), "set_param_y", "get_param_y", PARAM_ANGULAR_ERP);
 
-	ADD_PROPERTYI(PropertyInfo(Variant::BOOL, "angular_motor_y/enabled"), "set_flag_y", "get_flag_y", FLAG_ENABLE_MOTOR);
-	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "angular_motor_y/target_velocity"), "set_param_y", "get_param_y", PARAM_ANGULAR_MOTOR_TARGET_VELOCITY);
-	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "angular_motor_y/force_limit"), "set_param_y", "get_param_y", PARAM_ANGULAR_MOTOR_FORCE_LIMIT);
-
-	ADD_PROPERTYI(PropertyInfo(Variant::BOOL, "angular_spring_y/enabled"), "set_flag_y", "get_flag_y", FLAG_ENABLE_ANGULAR_SPRING);
-	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "angular_spring_y/stiffness"), "set_param_y", "get_param_y", PARAM_ANGULAR_SPRING_STIFFNESS);
-	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "angular_spring_y/damping"), "set_param_y", "get_param_y", PARAM_ANGULAR_SPRING_DAMPING);
-	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "angular_spring_y/equilibrium_point"), "set_param_y", "get_param_y", PARAM_ANGULAR_SPRING_EQUILIBRIUM_POINT);
-
-	// Z
-	ADD_PROPERTYI(PropertyInfo(Variant::BOOL, "linear_limit_z/enabled"), "set_flag_z", "get_flag_z", FLAG_ENABLE_LINEAR_LIMIT);
-	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "linear_limit_z/upper_distance", PROPERTY_HINT_NONE, "suffix:m"), "set_param_z", "get_param_z", PARAM_LINEAR_UPPER_LIMIT);
-	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "linear_limit_z/lower_distance", PROPERTY_HINT_NONE, "suffix:m"), "set_param_z", "get_param_z", PARAM_LINEAR_LOWER_LIMIT);
-	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "linear_limit_z/softness", PROPERTY_HINT_RANGE, "0.01,16,0.01"), "set_param_z", "get_param_z", PARAM_LINEAR_LIMIT_SOFTNESS);
-	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "linear_limit_z/restitution", PROPERTY_HINT_RANGE, "0.01,16,0.01"), "set_param_z", "get_param_z", PARAM_LINEAR_RESTITUTION);
-	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "linear_limit_z/damping", PROPERTY_HINT_RANGE, "0.01,16,0.01"), "set_param_z", "get_param_z", PARAM_LINEAR_DAMPING);
-
-	ADD_PROPERTYI(PropertyInfo(Variant::BOOL, "linear_motor_z/enabled"), "set_flag_z", "get_flag_z", FLAG_ENABLE_LINEAR_MOTOR);
-	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "linear_motor_z/target_velocity", PROPERTY_HINT_NONE, "suffix:m/s"), "set_param_z", "get_param_z", PARAM_LINEAR_MOTOR_TARGET_VELOCITY);
-	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "linear_motor_z/force_limit"), "set_param_z", "get_param_z", PARAM_LINEAR_MOTOR_FORCE_LIMIT);
-
-	ADD_PROPERTYI(PropertyInfo(Variant::BOOL, "linear_spring_z/enabled"), "set_flag_z", "get_flag_z", FLAG_ENABLE_LINEAR_SPRING);
-	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "linear_spring_z/stiffness"), "set_param_z", "get_param_z", PARAM_LINEAR_SPRING_STIFFNESS);
-	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "linear_spring_z/damping"), "set_param_z", "get_param_z", PARAM_LINEAR_SPRING_DAMPING);
-	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "linear_spring_z/equilibrium_point"), "set_param_z", "get_param_z", PARAM_LINEAR_SPRING_EQUILIBRIUM_POINT);
-
 	ADD_PROPERTYI(PropertyInfo(Variant::BOOL, "angular_limit_z/enabled"), "set_flag_z", "get_flag_z", FLAG_ENABLE_ANGULAR_LIMIT);
 	ADD_PROPERTY(PropertyInfo(Variant::FLOAT, "angular_limit_z/upper_angle", PROPERTY_HINT_RANGE, "-180,180,0.01"), "_set_angular_hi_limit_z", "_get_angular_hi_limit_z");
 	ADD_PROPERTY(PropertyInfo(Variant::FLOAT, "angular_limit_z/lower_angle", PROPERTY_HINT_RANGE, "-180,180,0.01"), "_set_angular_lo_limit_z", "_get_angular_lo_limit_z");
@@ -834,10 +820,32 @@ void Generic6DOFJoint3D::_bind_methods() {
 	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "angular_limit_z/force_limit"), "set_param_z", "get_param_z", PARAM_ANGULAR_FORCE_LIMIT);
 	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "angular_limit_z/erp"), "set_param_z", "get_param_z", PARAM_ANGULAR_ERP);
 
+	ADD_GROUP("Angular Motor", "angular_motor_");
+
+	ADD_PROPERTYI(PropertyInfo(Variant::BOOL, "angular_motor_x/enabled"), "set_flag_x", "get_flag_x", FLAG_ENABLE_MOTOR);
+	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "angular_motor_x/target_velocity"), "set_param_x", "get_param_x", PARAM_ANGULAR_MOTOR_TARGET_VELOCITY);
+	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "angular_motor_x/force_limit"), "set_param_x", "get_param_x", PARAM_ANGULAR_MOTOR_FORCE_LIMIT);
+
+	ADD_PROPERTYI(PropertyInfo(Variant::BOOL, "angular_motor_y/enabled"), "set_flag_y", "get_flag_y", FLAG_ENABLE_MOTOR);
+	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "angular_motor_y/target_velocity"), "set_param_y", "get_param_y", PARAM_ANGULAR_MOTOR_TARGET_VELOCITY);
+	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "angular_motor_y/force_limit"), "set_param_y", "get_param_y", PARAM_ANGULAR_MOTOR_FORCE_LIMIT);
+
 	ADD_PROPERTYI(PropertyInfo(Variant::BOOL, "angular_motor_z/enabled"), "set_flag_z", "get_flag_z", FLAG_ENABLE_MOTOR);
 	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "angular_motor_z/target_velocity"), "set_param_z", "get_param_z", PARAM_ANGULAR_MOTOR_TARGET_VELOCITY);
 	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "angular_motor_z/force_limit"), "set_param_z", "get_param_z", PARAM_ANGULAR_MOTOR_FORCE_LIMIT);
 
+	ADD_GROUP("Angular Spring", "angular_spring_");
+
+	ADD_PROPERTYI(PropertyInfo(Variant::BOOL, "angular_spring_x/enabled"), "set_flag_x", "get_flag_x", FLAG_ENABLE_ANGULAR_SPRING);
+	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "angular_spring_x/stiffness"), "set_param_x", "get_param_x", PARAM_ANGULAR_SPRING_STIFFNESS);
+	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "angular_spring_x/damping"), "set_param_x", "get_param_x", PARAM_ANGULAR_SPRING_DAMPING);
+	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "angular_spring_x/equilibrium_point"), "set_param_x", "get_param_x", PARAM_ANGULAR_SPRING_EQUILIBRIUM_POINT);
+
+	ADD_PROPERTYI(PropertyInfo(Variant::BOOL, "angular_spring_y/enabled"), "set_flag_y", "get_flag_y", FLAG_ENABLE_ANGULAR_SPRING);
+	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "angular_spring_y/stiffness"), "set_param_y", "get_param_y", PARAM_ANGULAR_SPRING_STIFFNESS);
+	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "angular_spring_y/damping"), "set_param_y", "get_param_y", PARAM_ANGULAR_SPRING_DAMPING);
+	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "angular_spring_y/equilibrium_point"), "set_param_y", "get_param_y", PARAM_ANGULAR_SPRING_EQUILIBRIUM_POINT);
+
 	ADD_PROPERTYI(PropertyInfo(Variant::BOOL, "angular_spring_z/enabled"), "set_flag_z", "get_flag_z", FLAG_ENABLE_ANGULAR_SPRING);
 	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "angular_spring_z/stiffness"), "set_param_z", "get_param_z", PARAM_ANGULAR_SPRING_STIFFNESS);
 	ADD_PROPERTYI(PropertyInfo(Variant::FLOAT, "angular_spring_z/damping"), "set_param_z", "get_param_z", PARAM_ANGULAR_SPRING_DAMPING);