nickysn 9a2f5e01d7 + added range checking for the immediate operand of NEC V20/V30's instructions CLR1, SET1, NOT1 and TEST1 9 éve
..
aoptcpu.pas 298cde6489 + initial code in aoptcpu for i8086: make use of lds/les 10 éve
aoptcpub.pas 19c8abac0b + enable jump optimizer for i8086 12 éve
aoptcpud.pas 19c8abac0b + enable jump optimizer for i8086 12 éve
cgcpu.pas 40193ea1db Add pi_has_open_array_parameter to proc_info.flags as this requires special handling for i8086 huge memory model to restore DS register correctly 9 éve
cpubase.inc 298cde6489 + initial code in aoptcpu for i8086: make use of lds/les 10 éve
cpuinfo.pas 5f87ac5d47 + added 486 to the list of supported CPUs on the i8086 and i386 targets 9 éve
cpunode.pas 3cc8ff11e3 + generate the stack segment for i8086 far data memory models from within fpc 11 éve
cpupara.pas fa3b0ca312 * support marking defs created via the getreusable*() class methods as 9 éve
cpupi.pas a6e39edb8f * moved the insertion of fwaits for 8087 from the nasm asm writer to ti8086procinfo.postprocess_code 10 éve
cputarg.pas 839ab714cc + started implementing a win16 target :) 10 éve
hlcgcpu.pas 1e33924f73 + support procvardefs (address only) in i8086's hlcgcpu.getaddressregister; this 9 éve
i8086att.inc a3964d9ee0 + support for RDTSCP, resolves issue #28916 9 éve
i8086atts.inc a3964d9ee0 + support for RDTSCP, resolves issue #28916 9 éve
i8086int.inc a3964d9ee0 + support for RDTSCP, resolves issue #28916 9 éve
i8086nop.inc e877bae4fc + add 'jmp rm16' and 'call rm16' before the rm32 versions on i8086, so the 9 éve
i8086op.inc a3964d9ee0 + support for RDTSCP, resolves issue #28916 9 éve
i8086prop.inc 0f301b4c57 * Fixed spilling info for vcvt* instructions, part of Mantis #29783. 9 éve
i8086tab.inc 9a2f5e01d7 + added range checking for the immediate operand of NEC V20/V30's instructions CLR1, SET1, NOT1 and TEST1 9 éve
n8086add.pas 863daace35 + implemented correct simplification of far pointer comparison of two pointer const nodes 10 éve
n8086cal.pas bacd303208 * synchronized with trunk up to r27758 11 éve
n8086cnv.pas a55b728d34 * optimizations for ofs() on i8086 to load only the offset (in a temporary 9 éve
n8086con.pas b0130c008d + show the full segment:offset value of far and huge pointer const nodes in the node tree generated by -vp 10 éve
n8086inl.pas c39128708e + implemented inc/dec for huge pointers 10 éve
n8086ld.pas 66725cf170 * fixed huge memory model threadvars after r32013 10 éve
n8086mat.pas 7e6ba9db2a * do an even better optimization (swap registers in the result, saving 2 mov 10 éve
n8086mem.pas a55b728d34 * optimizations for ofs() on i8086 to load only the offset (in a temporary 9 éve
n8086tcon.pas ef2c6065b6 + added support for word/smallint typed constants, initialized with ofs() on i8086 9 éve
n8086util.pas 1910177cf0 + added heapmax support to the $M directive on i8086-msdos. It is currently 11 éve
r8086ari.inc 5af873ee5b * x86 targets: Profiling shows that quite a bit of time is spent in findreg_by_number(), despite it uses binary search. Worse, it is repeated for every piece of register information. Trying to get rid of some of these calls: rearranged registers so that their "opcode" matches 3 LSBs of superregister number (with a few exceptions described at the beginning of x86reg.dat). This allows to lookup opcodes in regval() with O(1) complexity, and removes need in rXXXop.inc files. 12 éve
r8086att.inc 5af873ee5b * x86 targets: Profiling shows that quite a bit of time is spent in findreg_by_number(), despite it uses binary search. Worse, it is repeated for every piece of register information. Trying to get rid of some of these calls: rearranged registers so that their "opcode" matches 3 LSBs of superregister number (with a few exceptions described at the beginning of x86reg.dat). This allows to lookup opcodes in regval() with O(1) complexity, and removes need in rXXXop.inc files. 12 éve
r8086con.inc 5af873ee5b * x86 targets: Profiling shows that quite a bit of time is spent in findreg_by_number(), despite it uses binary search. Worse, it is repeated for every piece of register information. Trying to get rid of some of these calls: rearranged registers so that their "opcode" matches 3 LSBs of superregister number (with a few exceptions described at the beginning of x86reg.dat). This allows to lookup opcodes in regval() with O(1) complexity, and removes need in rXXXop.inc files. 12 éve
r8086dwrf.inc 5af873ee5b * x86 targets: Profiling shows that quite a bit of time is spent in findreg_by_number(), despite it uses binary search. Worse, it is repeated for every piece of register information. Trying to get rid of some of these calls: rearranged registers so that their "opcode" matches 3 LSBs of superregister number (with a few exceptions described at the beginning of x86reg.dat). This allows to lookup opcodes in regval() with O(1) complexity, and removes need in rXXXop.inc files. 12 éve
r8086int.inc 5af873ee5b * x86 targets: Profiling shows that quite a bit of time is spent in findreg_by_number(), despite it uses binary search. Worse, it is repeated for every piece of register information. Trying to get rid of some of these calls: rearranged registers so that their "opcode" matches 3 LSBs of superregister number (with a few exceptions described at the beginning of x86reg.dat). This allows to lookup opcodes in regval() with O(1) complexity, and removes need in rXXXop.inc files. 12 éve
r8086iri.inc 5af873ee5b * x86 targets: Profiling shows that quite a bit of time is spent in findreg_by_number(), despite it uses binary search. Worse, it is repeated for every piece of register information. Trying to get rid of some of these calls: rearranged registers so that their "opcode" matches 3 LSBs of superregister number (with a few exceptions described at the beginning of x86reg.dat). This allows to lookup opcodes in regval() with O(1) complexity, and removes need in rXXXop.inc files. 12 éve
r8086nasm.inc 5af873ee5b * x86 targets: Profiling shows that quite a bit of time is spent in findreg_by_number(), despite it uses binary search. Worse, it is repeated for every piece of register information. Trying to get rid of some of these calls: rearranged registers so that their "opcode" matches 3 LSBs of superregister number (with a few exceptions described at the beginning of x86reg.dat). This allows to lookup opcodes in regval() with O(1) complexity, and removes need in rXXXop.inc files. 12 éve
r8086nor.inc 107a6f6552 * i8086 versions of i386*.inc and r386*.inc renamed to i8086*.inc and r8086*.inc 12 éve
r8086nri.inc 5af873ee5b * x86 targets: Profiling shows that quite a bit of time is spent in findreg_by_number(), despite it uses binary search. Worse, it is repeated for every piece of register information. Trying to get rid of some of these calls: rearranged registers so that their "opcode" matches 3 LSBs of superregister number (with a few exceptions described at the beginning of x86reg.dat). This allows to lookup opcodes in regval() with O(1) complexity, and removes need in rXXXop.inc files. 12 éve
r8086num.inc 5af873ee5b * x86 targets: Profiling shows that quite a bit of time is spent in findreg_by_number(), despite it uses binary search. Worse, it is repeated for every piece of register information. Trying to get rid of some of these calls: rearranged registers so that their "opcode" matches 3 LSBs of superregister number (with a few exceptions described at the beginning of x86reg.dat). This allows to lookup opcodes in regval() with O(1) complexity, and removes need in rXXXop.inc files. 12 éve
r8086ot.inc 5af873ee5b * x86 targets: Profiling shows that quite a bit of time is spent in findreg_by_number(), despite it uses binary search. Worse, it is repeated for every piece of register information. Trying to get rid of some of these calls: rearranged registers so that their "opcode" matches 3 LSBs of superregister number (with a few exceptions described at the beginning of x86reg.dat). This allows to lookup opcodes in regval() with O(1) complexity, and removes need in rXXXop.inc files. 12 éve
r8086rni.inc 5af873ee5b * x86 targets: Profiling shows that quite a bit of time is spent in findreg_by_number(), despite it uses binary search. Worse, it is repeated for every piece of register information. Trying to get rid of some of these calls: rearranged registers so that their "opcode" matches 3 LSBs of superregister number (with a few exceptions described at the beginning of x86reg.dat). This allows to lookup opcodes in regval() with O(1) complexity, and removes need in rXXXop.inc files. 12 éve
r8086sri.inc 5af873ee5b * x86 targets: Profiling shows that quite a bit of time is spent in findreg_by_number(), despite it uses binary search. Worse, it is repeated for every piece of register information. Trying to get rid of some of these calls: rearranged registers so that their "opcode" matches 3 LSBs of superregister number (with a few exceptions described at the beginning of x86reg.dat). This allows to lookup opcodes in regval() with O(1) complexity, and removes need in rXXXop.inc files. 12 éve
r8086stab.inc 107a6f6552 * i8086 versions of i386*.inc and r386*.inc renamed to i8086*.inc and r8086*.inc 12 éve
r8086std.inc 5af873ee5b * x86 targets: Profiling shows that quite a bit of time is spent in findreg_by_number(), despite it uses binary search. Worse, it is repeated for every piece of register information. Trying to get rid of some of these calls: rearranged registers so that their "opcode" matches 3 LSBs of superregister number (with a few exceptions described at the beginning of x86reg.dat). This allows to lookup opcodes in regval() with O(1) complexity, and removes need in rXXXop.inc files. 12 éve
ra8086att.pas a04cbc09b0 * changed the default i8086 asmmode to Intel 12 éve
ra8086int.pas a04cbc09b0 * changed the default i8086 asmmode to Intel 12 éve
rgcpu.pas bacd303208 * synchronized with trunk up to r27758 11 éve
symcpu.pas b26e10d53c + generate proper win16 prologue/epilogue for exported routines (we don't yet 10 éve
tgcpu.pas 9880b53242 * changed all alignment parameters in the temp manager to shortint 11 éve