cgcpu.pas 88 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091929394959697989910010110210310410510610710810911011111211311411511611711811912012112212312412512612712812913013113213313413513613713813914014114214314414514614714814915015115215315415515615715815916016116216316416516616716816917017117217317417517617717817918018118218318418518618718818919019119219319419519619719819920020120220320420520620720820921021121221321421521621721821922022122222322422522622722822923023123223323423523623723823924024124224324424524624724824925025125225325425525625725825926026126226326426526626726826927027127227327427527627727827928028128228328428528628728828929029129229329429529629729829930030130230330430530630730830931031131231331431531631731831932032132232332432532632732832933033133233333433533633733833934034134234334434534634734834935035135235335435535635735835936036136236336436536636736836937037137237337437537637737837938038138238338438538638738838939039139239339439539639739839940040140240340440540640740840941041141241341441541641741841942042142242342442542642742842943043143243343443543643743843944044144244344444544644744844945045145245345445545645745845946046146246346446546646746846947047147247347447547647747847948048148248348448548648748848949049149249349449549649749849950050150250350450550650750850951051151251351451551651751851952052152252352452552652752852953053153253353453553653753853954054154254354454554654754854955055155255355455555655755855956056156256356456556656756856957057157257357457557657757857958058158258358458558658758858959059159259359459559659759859960060160260360460560660760860961061161261361461561661761861962062162262362462562662762862963063163263363463563663763863964064164264364464564664764864965065165265365465565665765865966066166266366466566666766866967067167267367467567667767867968068168268368468568668768868969069169269369469569669769869970070170270370470570670770870971071171271371471571671771871972072172272372472572672772872973073173273373473573673773873974074174274374474574674774874975075175275375475575675775875976076176276376476576676776876977077177277377477577677777877978078178278378478578678778878979079179279379479579679779879980080180280380480580680780880981081181281381481581681781881982082182282382482582682782882983083183283383483583683783883984084184284384484584684784884985085185285385485585685785885986086186286386486586686786886987087187287387487587687787887988088188288388488588688788888989089189289389489589689789889990090190290390490590690790890991091191291391491591691791891992092192292392492592692792892993093193293393493593693793893994094194294394494594694794894995095195295395495595695795895996096196296396496596696796896997097197297397497597697797897998098198298398498598698798898999099199299399499599699799899910001001100210031004100510061007100810091010101110121013101410151016101710181019102010211022102310241025102610271028102910301031103210331034103510361037103810391040104110421043104410451046104710481049105010511052105310541055105610571058105910601061106210631064106510661067106810691070107110721073107410751076107710781079108010811082108310841085108610871088108910901091109210931094109510961097109810991100110111021103110411051106110711081109111011111112111311141115111611171118111911201121112211231124112511261127112811291130113111321133113411351136113711381139114011411142114311441145114611471148114911501151115211531154115511561157115811591160116111621163116411651166116711681169117011711172117311741175117611771178117911801181118211831184118511861187118811891190119111921193119411951196119711981199120012011202120312041205120612071208120912101211121212131214121512161217121812191220122112221223122412251226122712281229123012311232123312341235123612371238123912401241124212431244124512461247124812491250125112521253125412551256125712581259126012611262126312641265126612671268126912701271127212731274127512761277127812791280128112821283128412851286128712881289129012911292129312941295129612971298129913001301130213031304130513061307130813091310131113121313131413151316131713181319132013211322132313241325132613271328132913301331133213331334133513361337133813391340134113421343134413451346134713481349135013511352135313541355135613571358135913601361136213631364136513661367136813691370137113721373137413751376137713781379138013811382138313841385138613871388138913901391139213931394139513961397139813991400140114021403140414051406140714081409141014111412141314141415141614171418141914201421142214231424142514261427142814291430143114321433143414351436143714381439144014411442144314441445144614471448144914501451145214531454145514561457145814591460146114621463146414651466146714681469147014711472147314741475147614771478147914801481148214831484148514861487148814891490149114921493149414951496149714981499150015011502150315041505150615071508150915101511151215131514151515161517151815191520152115221523152415251526152715281529153015311532153315341535153615371538153915401541154215431544154515461547154815491550155115521553155415551556155715581559156015611562156315641565156615671568156915701571157215731574157515761577157815791580158115821583158415851586158715881589159015911592159315941595159615971598159916001601160216031604160516061607160816091610161116121613161416151616161716181619162016211622162316241625162616271628162916301631163216331634163516361637163816391640164116421643164416451646164716481649165016511652165316541655165616571658165916601661166216631664166516661667166816691670167116721673167416751676167716781679168016811682168316841685168616871688168916901691169216931694169516961697169816991700170117021703170417051706170717081709171017111712171317141715171617171718171917201721172217231724172517261727172817291730173117321733173417351736173717381739174017411742174317441745174617471748174917501751175217531754175517561757175817591760176117621763176417651766176717681769177017711772177317741775177617771778177917801781178217831784178517861787178817891790179117921793179417951796179717981799180018011802180318041805180618071808180918101811181218131814181518161817181818191820182118221823182418251826182718281829183018311832183318341835183618371838183918401841184218431844184518461847184818491850185118521853185418551856185718581859186018611862186318641865186618671868186918701871187218731874187518761877187818791880188118821883188418851886188718881889189018911892189318941895189618971898189919001901190219031904190519061907190819091910191119121913191419151916191719181919192019211922192319241925192619271928192919301931193219331934193519361937193819391940194119421943194419451946194719481949195019511952195319541955195619571958195919601961196219631964196519661967196819691970197119721973197419751976197719781979198019811982198319841985198619871988198919901991199219931994199519961997199819992000200120022003200420052006200720082009201020112012201320142015201620172018201920202021202220232024202520262027202820292030203120322033203420352036203720382039204020412042204320442045204620472048204920502051205220532054205520562057205820592060206120622063206420652066206720682069207020712072207320742075207620772078207920802081208220832084208520862087208820892090209120922093209420952096209720982099210021012102210321042105210621072108210921102111211221132114211521162117211821192120212121222123212421252126212721282129213021312132213321342135213621372138213921402141214221432144214521462147214821492150215121522153215421552156215721582159216021612162216321642165216621672168216921702171217221732174217521762177217821792180218121822183218421852186218721882189219021912192219321942195219621972198219922002201220222032204220522062207220822092210221122122213221422152216221722182219222022212222222322242225222622272228222922302231223222332234223522362237223822392240224122422243224422452246224722482249225022512252225322542255225622572258225922602261226222632264
  1. {
  2. Copyright (c) 2014 by Jonas Maebe
  3. This unit implements the code generator for AArch64
  4. This program is free software; you can redistribute it and/or modify
  5. it under the terms of the GNU General Public License as published by
  6. the Free Software Foundation; either version 2 of the License, or
  7. (at your option) any later version.
  8. This program is distributed in the hope that it will be useful,
  9. but WITHOUT ANY WARRANTY; without even the implied warranty of
  10. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  11. GNU General Public License for more details.
  12. You should have received a copy of the GNU General Public License
  13. along with this program; if not, write to the Free Software
  14. Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  15. ****************************************************************************
  16. }
  17. unit cgcpu;
  18. {$i fpcdefs.inc}
  19. interface
  20. uses
  21. globtype,parabase,
  22. cgbase,cgutils,cgobj,
  23. aasmbase,aasmtai,aasmdata,aasmcpu,
  24. cpubase,cpuinfo,
  25. node,symconst,SymType,symdef,
  26. rgcpu;
  27. type
  28. tcgaarch64=class(tcg)
  29. protected
  30. { changes register size without adding register allocation info }
  31. function makeregsize(reg: tregister; size: tcgsize): tregister; overload;
  32. public
  33. { simplifies "ref" so it can be used with "op". If "ref" can be used
  34. with a different load/Store operation that has the same meaning as the
  35. original one, "op" will be replaced with the alternative }
  36. procedure make_simple_ref(list:TAsmList; var op: tasmop; size: tcgsize; oppostfix: toppostfix; var ref: treference; preferred_newbasereg: tregister);
  37. function getfpuregister(list: TAsmList; size: Tcgsize): Tregister; override;
  38. procedure handle_reg_imm12_reg(list: TAsmList; op: Tasmop; size: tcgsize; src: tregister; a: tcgint; dst: tregister; tmpreg: tregister; setflags, usedest: boolean);
  39. procedure init_register_allocators;override;
  40. procedure done_register_allocators;override;
  41. function getmmregister(list:TAsmList;size:tcgsize):tregister;override;
  42. function handle_load_store(list:TAsmList; op: tasmop; size: tcgsize; oppostfix: toppostfix; reg: tregister; ref: treference):treference;
  43. procedure a_call_name(list:TAsmList;const s:string; weak: boolean);override;
  44. procedure a_call_reg(list:TAsmList;Reg:tregister);override;
  45. { General purpose instructions }
  46. procedure maybeadjustresult(list: TAsmList; op: topcg; size: tcgsize; dst: tregister);
  47. procedure a_op_const_reg(list: TAsmList; op: topcg; size: tcgsize; a: tcgint; reg: tregister);override;
  48. procedure a_op_reg_reg(list: TAsmList; op: topcg; size: tcgsize; src, dst: tregister);override;
  49. procedure a_op_const_reg_reg(list: TAsmList; op: topcg; size: tcgsize; a: tcgint; src, dst: tregister);override;
  50. procedure a_op_reg_reg_reg(list: TAsmList; op: topcg; size: tcgsize; src1, src2, dst: tregister);override;
  51. procedure a_op_const_reg_reg_checkoverflow(list: TAsmList; op: topcg; size: tcgsize; a: tcgint; src, dst: tregister; setflags : boolean; var ovloc : tlocation);override;
  52. procedure a_op_reg_reg_reg_checkoverflow(list: TAsmList; op: topcg; size: tcgsize; src1, src2, dst: tregister; setflags : boolean; var ovloc : tlocation);override;
  53. { move instructions }
  54. procedure a_load_const_reg(list: TAsmList; size: tcgsize; a: tcgint; reg: tregister);override;
  55. procedure a_load_const_ref(list: TAsmList; size: tcgsize; a: tcgint; const ref: treference); override;
  56. procedure a_load_reg_ref(list: TAsmList; fromsize, tosize: tcgsize; reg: tregister;const ref: TReference);override;
  57. procedure a_load_reg_ref_unaligned(list: TAsmList; fromsize, tosize: tcgsize; register: tregister; const ref: treference); override;
  58. procedure a_load_ref_reg(list: TAsmList; fromsize, tosize: tcgsize; const ref: TReference; reg: tregister);override;
  59. procedure a_load_ref_reg_unaligned(list: TAsmList; fromsize, tosize: tcgsize; const ref: treference; register: tregister); override;
  60. procedure a_load_reg_reg(list: TAsmList; fromsize, tosize: tcgsize; reg1, reg2: tregister);override;
  61. procedure a_loadaddr_ref_reg(list: TAsmList; const ref: TReference; r: tregister);override;
  62. { fpu move instructions (not used, all floating point is vector unit-based) }
  63. procedure a_loadfpu_reg_reg(list: TAsmList; fromsize, tosize: tcgsize; reg1, reg2: tregister); override;
  64. procedure a_loadfpu_ref_reg(list: TAsmList; fromsize, tosize: tcgsize; const ref: treference; reg: tregister); override;
  65. procedure a_loadfpu_reg_ref(list: TAsmList; fromsize, tosize: tcgsize; reg: tregister; const ref: treference); override;
  66. procedure a_loadmm_reg_reg(list: TAsmList; fromsize, tosize: tcgsize; reg1, reg2: tregister;shuffle : pmmshuffle);override;
  67. procedure a_loadmm_ref_reg(list: TAsmList; fromsize, tosize: tcgsize; const ref: TReference; reg: tregister; shuffle: pmmshuffle);override;
  68. procedure a_loadmm_reg_ref(list: TAsmList; fromsize, tosize: tcgsize; reg: tregister; const ref: TReference; shuffle: pmmshuffle);override;
  69. procedure a_loadmm_intreg_reg(list: TAsmList; fromsize, tosize: tcgsize; intreg, mmreg: tregister; shuffle: pmmshuffle); override;
  70. procedure a_loadmm_reg_intreg(list: TAsmList; fromsize, tosize: tcgsize; mmreg, intreg: tregister; shuffle: pmmshuffle); override;
  71. procedure a_opmm_reg_reg(list: TAsmList; Op: TOpCG; size: tcgsize; src, dst: tregister; shuffle: pmmshuffle); override;
  72. procedure a_bit_scan_reg_reg(list: TAsmList; reverse: boolean; srcsize, dstsize: tcgsize; src, dst: TRegister); override;
  73. { comparison operations }
  74. procedure a_cmp_const_reg_label(list: TAsmList; size: tcgsize; cmp_op: topcmp; a: tcgint; reg: tregister; l: tasmlabel);override;
  75. procedure a_cmp_reg_reg_label(list: TAsmList; size: tcgsize; cmp_op: topcmp; reg1, reg2: tregister; l: tasmlabel);override;
  76. procedure a_jmp_always(list: TAsmList; l: TAsmLabel);override;
  77. procedure a_jmp_name(list: TAsmList; const s: string);override;
  78. procedure a_jmp_cond(list: TAsmList; cond: TOpCmp; l: tasmlabel);{ override;}
  79. procedure a_jmp_flags(list: TAsmList; const f: tresflags; l: tasmlabel);override;
  80. procedure g_flags2reg(list: TAsmList; size: tcgsize; const f:tresflags; reg: tregister);override;
  81. procedure g_overflowcheck(list: TAsmList; const loc: tlocation; def: tdef);override;
  82. procedure g_overflowcheck_loc(list: TAsmList; const loc: tlocation; def: tdef; ovloc: tlocation);override;
  83. procedure g_proc_entry(list: TAsmList; localsize: longint; nostackframe: boolean);override;
  84. procedure g_proc_exit(list: TAsmList; parasize: longint; nostackframe: boolean);override;
  85. procedure g_maybe_got_init(list: TAsmList); override;
  86. procedure g_restore_registers(list: TAsmList);override;
  87. procedure g_save_registers(list: TAsmList);override;
  88. procedure g_concatcopy_move(list: TAsmList; const source, dest: treference; len: tcgint);
  89. procedure g_concatcopy(list: TAsmList; const source, dest: treference; len: tcgint);override;
  90. procedure g_adjust_self_value(list: TAsmList; procdef: tprocdef; ioffset: tcgint);override;
  91. private
  92. function save_regs(list: TAsmList; rt: tregistertype; lowsr, highsr: tsuperregister; sub: tsubregister): longint;
  93. procedure load_regs(list: TAsmList; rt: tregistertype; lowsr, highsr: tsuperregister; sub: tsubregister);
  94. end;
  95. procedure create_codegen;
  96. const
  97. TOpCG2AsmOpReg: array[topcg] of TAsmOp = (
  98. A_NONE,A_MOV,A_ADD,A_AND,A_UDIV,A_SDIV,A_MUL,A_MUL,A_NEG,A_MVN,A_ORR,A_ASRV,A_LSLV,A_LSRV,A_SUB,A_EOR,A_NONE,A_RORV
  99. );
  100. TOpCG2AsmOpImm: array[topcg] of TAsmOp = (
  101. A_NONE,A_MOV,A_ADD,A_AND,A_UDIV,A_SDIV,A_MUL,A_MUL,A_NEG,A_MVN,A_ORR,A_ASR,A_LSL,A_LSR,A_SUB,A_EOR,A_NONE,A_ROR
  102. );
  103. TOpCmp2AsmCond: array[topcmp] of TAsmCond = (C_NONE,C_EQ,C_GT,
  104. C_LT,C_GE,C_LE,C_NE,C_LS,C_CC,C_CS,C_HI
  105. );
  106. implementation
  107. uses
  108. globals,verbose,systems,cutils,
  109. paramgr,fmodule,
  110. symtable,symsym,
  111. tgobj,
  112. procinfo,cpupi;
  113. procedure tcgaarch64.make_simple_ref(list:TAsmList; var op: tasmop; size: tcgsize; oppostfix: toppostfix; var ref: treference; preferred_newbasereg: tregister);
  114. var
  115. href: treference;
  116. so: tshifterop;
  117. accesssize: longint;
  118. begin
  119. if (ref.base=NR_NO) then
  120. begin
  121. if ref.shiftmode<>SM_None then
  122. internalerror(2014110701);
  123. ref.base:=ref.index;
  124. ref.index:=NR_NO;
  125. end;
  126. { no abitrary scale factor support (the generic code doesn't set it,
  127. AArch-specific code shouldn't either) }
  128. if not(ref.scalefactor in [0,1]) then
  129. internalerror(2014111002);
  130. case simple_ref_type(op,size,oppostfix,ref) of
  131. sr_simple:
  132. exit;
  133. sr_internal_illegal:
  134. internalerror(2014121702);
  135. sr_complex:
  136. { continue } ;
  137. end;
  138. if assigned(ref.symbol) then
  139. begin
  140. { internal "load symbol" instructions should already be valid }
  141. if assigned(ref.symboldata) or
  142. (ref.refaddr in [addr_pic,addr_gotpage,addr_gotpageoffset,addr_page,addr_pageoffset]) then
  143. internalerror(2014110802);
  144. { no relative symbol support (needed) yet }
  145. if assigned(ref.relsymbol) then
  146. internalerror(2014111001);
  147. { loading a symbol address (whether it's in the GOT or not) consists
  148. of two parts: first load the page on which it is located, then
  149. either the offset in the page or load the value at that offset in
  150. the page. This final GOT-load can be relaxed by the linker in case
  151. the variable itself can be stored directly in the GOT }
  152. if (preferred_newbasereg=NR_NO) or
  153. (ref.base=preferred_newbasereg) or
  154. (ref.index=preferred_newbasereg) then
  155. preferred_newbasereg:=getaddressregister(list);
  156. { load the (GOT) page }
  157. reference_reset_symbol(href,ref.symbol,0,8,[]);
  158. if ((ref.symbol.typ in [AT_FUNCTION,AT_LABEL]) and
  159. (ref.symbol.bind in [AB_LOCAL,AB_GLOBAL])) or
  160. ((ref.symbol.typ=AT_DATA) and
  161. (ref.symbol.bind=AB_LOCAL)) then
  162. href.refaddr:=addr_page
  163. else
  164. href.refaddr:=addr_gotpage;
  165. list.concat(taicpu.op_reg_ref(A_ADRP,preferred_newbasereg,href));
  166. { load the GOT entry (= address of the variable) }
  167. reference_reset_base(href,preferred_newbasereg,0,ctempposinvalid,sizeof(pint),[]);
  168. href.symbol:=ref.symbol;
  169. { code symbols defined in the current compilation unit do not
  170. have to be accessed via the GOT }
  171. if ((ref.symbol.typ in [AT_FUNCTION,AT_LABEL]) and
  172. (ref.symbol.bind in [AB_LOCAL,AB_GLOBAL])) or
  173. ((ref.symbol.typ=AT_DATA) and
  174. (ref.symbol.bind=AB_LOCAL)) then
  175. begin
  176. href.base:=NR_NO;
  177. href.refaddr:=addr_pageoffset;
  178. list.concat(taicpu.op_reg_reg_ref(A_ADD,preferred_newbasereg,preferred_newbasereg,href));
  179. end
  180. else
  181. begin
  182. href.refaddr:=addr_gotpageoffset;
  183. { use a_load_ref_reg() rather than directly encoding the LDR,
  184. so that we'll check the validity of the reference }
  185. a_load_ref_reg(list,OS_ADDR,OS_ADDR,href,preferred_newbasereg);
  186. end;
  187. { set as new base register }
  188. if ref.base=NR_NO then
  189. ref.base:=preferred_newbasereg
  190. else if ref.index=NR_NO then
  191. ref.index:=preferred_newbasereg
  192. else
  193. begin
  194. { make sure it's valid in case ref.base is SP -> make it
  195. the second operand}
  196. a_op_reg_reg_reg(list,OP_ADD,OS_ADDR,preferred_newbasereg,ref.base,preferred_newbasereg);
  197. ref.base:=preferred_newbasereg
  198. end;
  199. ref.symbol:=nil;
  200. end;
  201. { base & index }
  202. if (ref.base<>NR_NO) and
  203. (ref.index<>NR_NO) then
  204. begin
  205. case op of
  206. A_LDR, A_STR:
  207. begin
  208. if (ref.shiftmode=SM_None) and
  209. (ref.shiftimm<>0) then
  210. internalerror(2014110805);
  211. { wrong shift? (possible in case of something like
  212. array_of_2byte_rec[x].bytefield -> shift will be set 1, but
  213. the final load is a 1 byte -> can't use shift after all }
  214. if (ref.shiftmode in [SM_LSL,SM_UXTW,SM_SXTW]) and
  215. ((ref.shiftimm<>BsfDWord(tcgsizep2size[size])) or
  216. (ref.offset<>0)) then
  217. begin
  218. if preferred_newbasereg=NR_NO then
  219. preferred_newbasereg:=getaddressregister(list);
  220. { "add" supports a superset of the shift modes supported by
  221. load/store instructions }
  222. shifterop_reset(so);
  223. so.shiftmode:=ref.shiftmode;
  224. so.shiftimm:=ref.shiftimm;
  225. list.concat(taicpu.op_reg_reg_reg_shifterop(A_ADD,preferred_newbasereg,ref.base,ref.index,so));
  226. reference_reset_base(ref,preferred_newbasereg,ref.offset,ref.temppos,ref.alignment,ref.volatility);
  227. { possibly still an invalid offset -> fall through }
  228. end
  229. else if ref.offset<>0 then
  230. begin
  231. if (preferred_newbasereg=NR_NO) or
  232. { we keep ref.index, so it must not be overwritten }
  233. (ref.index=preferred_newbasereg) then
  234. preferred_newbasereg:=getaddressregister(list);
  235. { add to the base and not to the index, because the index
  236. may be scaled; this works even if the base is SP }
  237. a_op_const_reg_reg(list,OP_ADD,OS_ADDR,ref.offset,ref.base,preferred_newbasereg);
  238. ref.offset:=0;
  239. ref.base:=preferred_newbasereg;
  240. { finished }
  241. exit;
  242. end
  243. else
  244. { valid -> exit }
  245. exit;
  246. end;
  247. { todo }
  248. A_LD1,A_LD2,A_LD3,A_LD4,
  249. A_ST1,A_ST2,A_ST3,A_ST4:
  250. internalerror(2014110704);
  251. { these don't support base+index }
  252. A_LDUR,A_STUR,
  253. A_LDP,A_STP:
  254. begin
  255. { these either don't support pre-/post-indexing, or don't
  256. support it with base+index }
  257. if ref.addressmode<>AM_OFFSET then
  258. internalerror(2014110911);
  259. if preferred_newbasereg=NR_NO then
  260. preferred_newbasereg:=getaddressregister(list);
  261. if ref.shiftmode<>SM_None then
  262. begin
  263. { "add" supports a superset of the shift modes supported by
  264. load/store instructions }
  265. shifterop_reset(so);
  266. so.shiftmode:=ref.shiftmode;
  267. so.shiftimm:=ref.shiftimm;
  268. list.concat(taicpu.op_reg_reg_reg_shifterop(A_ADD,preferred_newbasereg,ref.base,ref.index,so));
  269. end
  270. else
  271. a_op_reg_reg_reg(list,OP_ADD,OS_ADDR,ref.index,ref.base,preferred_newbasereg);
  272. reference_reset_base(ref,preferred_newbasereg,ref.offset,ref.temppos,ref.alignment,ref.volatility);
  273. { fall through to the handling of base + offset, since the
  274. offset may still be too big }
  275. end;
  276. else
  277. internalerror(2014110901);
  278. end;
  279. end;
  280. { base + offset }
  281. if ref.base<>NR_NO then
  282. begin
  283. { valid offset for LDUR/STUR -> use that }
  284. if (ref.addressmode=AM_OFFSET) and
  285. (op in [A_LDR,A_STR]) and
  286. (ref.offset>=-256) and
  287. (ref.offset<=255) then
  288. begin
  289. if op=A_LDR then
  290. op:=A_LDUR
  291. else
  292. op:=A_STUR
  293. end
  294. { if it's not a valid LDUR/STUR, use LDR/STR }
  295. else if (op in [A_LDUR,A_STUR]) and
  296. ((ref.offset<-256) or
  297. (ref.offset>255) or
  298. (ref.addressmode<>AM_OFFSET)) then
  299. begin
  300. if op=A_LDUR then
  301. op:=A_LDR
  302. else
  303. op:=A_STR
  304. end;
  305. case op of
  306. A_LDR,A_STR:
  307. begin
  308. case ref.addressmode of
  309. AM_PREINDEXED:
  310. begin
  311. { since the loaded/stored register cannot be the same
  312. as the base register, we can safely add the
  313. offset to the base if it doesn't fit}
  314. if (ref.offset<-256) or
  315. (ref.offset>255) then
  316. begin
  317. a_op_const_reg(list,OP_ADD,OS_ADDR,ref.offset,ref.base);
  318. ref.offset:=0;
  319. end;
  320. end;
  321. AM_POSTINDEXED:
  322. begin
  323. { cannot emulate post-indexing if we have to fold the
  324. offset into the base register }
  325. if (ref.offset<-256) or
  326. (ref.offset>255) then
  327. internalerror(2014110909);
  328. { ok }
  329. end;
  330. AM_OFFSET:
  331. begin
  332. { unsupported offset -> fold into base register }
  333. accesssize:=1 shl tcgsizep2size[size];
  334. if (ref.offset<0) or
  335. (ref.offset>(((1 shl 12)-1)*accesssize)) or
  336. ((ref.offset mod accesssize)<>0) then
  337. begin
  338. if preferred_newbasereg=NR_NO then
  339. preferred_newbasereg:=getaddressregister(list);
  340. { can we split the offset beween an
  341. "add/sub (imm12 shl 12)" and the load (also an
  342. imm12)?
  343. -- the offset from the load will always be added,
  344. that's why the lower bound has a smaller range
  345. than the upper bound; it must also be a multiple
  346. of the access size }
  347. if (ref.offset>=-(((1 shl 12)-1) shl 12)) and
  348. (ref.offset<=((1 shl 12)-1) shl 12 + ((1 shl 12)-1)) and
  349. ((ref.offset mod accesssize)=0) then
  350. begin
  351. a_op_const_reg_reg(list,OP_ADD,OS_ADDR,(ref.offset shr 12) shl 12,ref.base,preferred_newbasereg);
  352. ref.offset:=ref.offset-(ref.offset shr 12) shl 12;
  353. end
  354. else
  355. begin
  356. a_op_const_reg_reg(list,OP_ADD,OS_ADDR,ref.offset,ref.base,preferred_newbasereg);
  357. ref.offset:=0;
  358. end;
  359. reference_reset_base(ref,preferred_newbasereg,ref.offset,ref.temppos,ref.alignment,ref.volatility);
  360. end;
  361. end
  362. else
  363. internalerror(2014110904);
  364. end;
  365. end;
  366. A_LDP,A_STP:
  367. begin
  368. { unsupported offset -> fold into base register (these
  369. instructions support all addressmodes) }
  370. if (ref.offset<-(1 shl (6+tcgsizep2size[size]))) or
  371. (ref.offset>(1 shl (6+tcgsizep2size[size]))-1) then
  372. begin
  373. case ref.addressmode of
  374. AM_POSTINDEXED:
  375. { don't emulate post-indexing if we have to fold the
  376. offset into the base register }
  377. internalerror(2014110910);
  378. AM_PREINDEXED:
  379. { this means the offset must be added to the current
  380. base register }
  381. preferred_newbasereg:=ref.base;
  382. AM_OFFSET:
  383. if preferred_newbasereg=NR_NO then
  384. preferred_newbasereg:=getaddressregister(list);
  385. end;
  386. a_op_const_reg_reg(list,OP_ADD,OS_ADDR,ref.offset,ref.base,preferred_newbasereg);
  387. reference_reset_base(ref,preferred_newbasereg,0,ref.temppos,ref.alignment,ref.volatility);
  388. end
  389. end;
  390. A_LDUR,A_STUR:
  391. begin
  392. { valid, checked above }
  393. end;
  394. { todo }
  395. A_LD1,A_LD2,A_LD3,A_LD4,
  396. A_ST1,A_ST2,A_ST3,A_ST4:
  397. internalerror(2014110908);
  398. else
  399. internalerror(2014110708);
  400. end;
  401. { done }
  402. exit;
  403. end;
  404. { only an offset -> change to base (+ offset 0) }
  405. if preferred_newbasereg=NR_NO then
  406. preferred_newbasereg:=getaddressregister(list);
  407. a_load_const_reg(list,OS_ADDR,ref.offset,preferred_newbasereg);
  408. reference_reset_base(ref,preferred_newbasereg,0,ref.temppos,newalignment(8,ref.offset),ref.volatility);
  409. end;
  410. function tcgaarch64.makeregsize(reg: tregister; size: tcgsize): tregister;
  411. var
  412. subreg:Tsubregister;
  413. begin
  414. subreg:=cgsize2subreg(getregtype(reg),size);
  415. result:=reg;
  416. setsubreg(result,subreg);
  417. end;
  418. function tcgaarch64.getfpuregister(list: TAsmList; size: Tcgsize): Tregister;
  419. begin
  420. internalerror(2014122110);
  421. { squash warning }
  422. result:=NR_NO;
  423. end;
  424. function tcgaarch64.handle_load_store(list: TAsmList; op: tasmop; size: tcgsize; oppostfix: toppostfix; reg: tregister; ref: treference):treference;
  425. begin
  426. make_simple_ref(list,op,size,oppostfix,ref,NR_NO);
  427. list.concat(setoppostfix(taicpu.op_reg_ref(op,reg,ref),oppostfix));
  428. result:=ref;
  429. end;
  430. procedure tcgaarch64.handle_reg_imm12_reg(list: TAsmList; op: Tasmop; size: tcgsize; src: tregister; a: tcgint; dst: tregister; tmpreg: tregister; setflags, usedest: boolean);
  431. var
  432. instr: taicpu;
  433. so: tshifterop;
  434. hadtmpreg: boolean;
  435. begin
  436. { imm12 }
  437. if (a>=0) and
  438. (a<=((1 shl 12)-1)) then
  439. if usedest then
  440. instr:=taicpu.op_reg_reg_const(op,dst,src,a)
  441. else
  442. instr:=taicpu.op_reg_const(op,src,a)
  443. { imm12 lsl 12 }
  444. else if (a and not(((tcgint(1) shl 12)-1) shl 12))=0 then
  445. begin
  446. so.shiftmode:=SM_LSL;
  447. so.shiftimm:=12;
  448. if usedest then
  449. instr:=taicpu.op_reg_reg_const_shifterop(op,dst,src,a shr 12,so)
  450. else
  451. instr:=taicpu.op_reg_const_shifterop(op,src,a shr 12,so)
  452. end
  453. else
  454. begin
  455. { todo: other possible optimizations (e.g. load 16 bit constant in
  456. register and then add/sub/cmp/cmn shifted the rest) }
  457. if tmpreg=NR_NO then
  458. begin
  459. hadtmpreg:=false;
  460. tmpreg:=getintregister(list,size);
  461. end
  462. else
  463. begin
  464. hadtmpreg:=true;
  465. getcpuregister(list,tmpreg);
  466. end;
  467. a_load_const_reg(list,size,a,tmpreg);
  468. if usedest then
  469. instr:=taicpu.op_reg_reg_reg(op,dst,src,tmpreg)
  470. else
  471. instr:=taicpu.op_reg_reg(op,src,tmpreg);
  472. if hadtmpreg then
  473. ungetcpuregister(list,tmpreg);
  474. end;
  475. if setflags then
  476. setoppostfix(instr,PF_S);
  477. list.concat(instr);
  478. end;
  479. {****************************************************************************
  480. Assembler code
  481. ****************************************************************************}
  482. procedure tcgaarch64.init_register_allocators;
  483. begin
  484. inherited init_register_allocators;
  485. rg[R_INTREGISTER]:=trgintcpu.create(R_INTREGISTER,R_SUBWHOLE,
  486. [RS_X0,RS_X1,RS_X2,RS_X3,RS_X4,RS_X5,RS_X6,RS_X7,RS_X8,
  487. RS_X9,RS_X10,RS_X11,RS_X12,RS_X13,RS_X14,RS_X15,RS_X16,RS_X17,
  488. RS_X19,RS_X20,RS_X21,RS_X22,RS_X23,RS_X24,RS_X25,RS_X26,RS_X27,RS_X28
  489. { maybe we can enable this in the future for leaf functions (it's
  490. the frame pointer)
  491. ,RS_X29 }],
  492. first_int_imreg,[]);
  493. rg[R_MMREGISTER]:=trgcpu.create(R_MMREGISTER,R_SUBMMD,
  494. [RS_Q0,RS_Q1,RS_Q2,RS_Q3,RS_Q4,RS_Q5,RS_Q6,RS_Q7,
  495. RS_Q8,RS_Q9,RS_Q10,RS_Q11,RS_Q12,RS_Q13,RS_Q14,RS_Q15,
  496. RS_Q16,RS_Q17,RS_Q18,RS_Q19,RS_Q20,RS_Q21,RS_Q22,RS_Q23,
  497. RS_Q24,RS_Q25,RS_Q26,RS_Q27,RS_Q28,RS_Q29,RS_Q30,RS_Q31],
  498. first_mm_imreg,[]);
  499. end;
  500. procedure tcgaarch64.done_register_allocators;
  501. begin
  502. rg[R_INTREGISTER].free;
  503. rg[R_FPUREGISTER].free;
  504. rg[R_MMREGISTER].free;
  505. inherited done_register_allocators;
  506. end;
  507. function tcgaarch64.getmmregister(list: TAsmList; size: tcgsize):tregister;
  508. begin
  509. case size of
  510. OS_F32:
  511. result:=rg[R_MMREGISTER].getregister(list,R_SUBMMS);
  512. OS_F64:
  513. result:=rg[R_MMREGISTER].getregister(list,R_SUBMMD)
  514. else
  515. internalerror(2014102701);
  516. end;
  517. end;
  518. procedure tcgaarch64.a_call_name(list: TAsmList; const s: string; weak: boolean);
  519. begin
  520. if not weak then
  521. list.concat(taicpu.op_sym(A_BL,current_asmdata.RefAsmSymbol(s,AT_FUNCTION)))
  522. else
  523. list.concat(taicpu.op_sym(A_BL,current_asmdata.WeakRefAsmSymbol(s,AT_FUNCTION)));
  524. end;
  525. procedure tcgaarch64.a_call_reg(list:TAsmList;Reg:tregister);
  526. begin
  527. list.concat(taicpu.op_reg(A_BLR,reg));
  528. end;
  529. {********************** load instructions ********************}
  530. procedure tcgaarch64.a_load_const_reg(list: TAsmList; size: tcgsize; a: tcgint; reg : tregister);
  531. var
  532. preva: tcgint;
  533. opc: tasmop;
  534. shift,maxshift: byte;
  535. so: tshifterop;
  536. reginited: boolean;
  537. mask: tcgint;
  538. begin
  539. { if we load a value into a 32 bit register, it is automatically
  540. zero-extended to 64 bit }
  541. if (hi(a)=0) and
  542. (size in [OS_64,OS_S64]) then
  543. begin
  544. size:=OS_32;
  545. reg:=makeregsize(reg,size);
  546. end;
  547. { values <= 32 bit are stored in a 32 bit register }
  548. if not(size in [OS_64,OS_S64]) then
  549. a:=cardinal(a);
  550. if size in [OS_64,OS_S64] then
  551. begin
  552. mask:=-1;
  553. maxshift:=64;
  554. end
  555. else
  556. begin
  557. mask:=$ffffffff;
  558. maxshift:=32;
  559. end;
  560. { single movn enough? (to be extended) }
  561. shift:=16;
  562. preva:=a;
  563. repeat
  564. if (a shr shift)=(mask shr shift) then
  565. begin
  566. if shift=16 then
  567. list.concat(taicpu.op_reg_const(A_MOVN,reg,not(word(preva))))
  568. else
  569. begin
  570. shifterop_reset(so);
  571. so.shiftmode:=SM_LSL;
  572. so.shiftimm:=shift-16;
  573. list.concat(taicpu.op_reg_const_shifterop(A_MOVN,reg,not(word(preva)),so));
  574. end;
  575. exit;
  576. end;
  577. { only try the next 16 bits if the current one is all 1 bits, since
  578. the movn will set all lower bits to 1 }
  579. if word(a shr (shift-16))<>$ffff then
  580. break;
  581. inc(shift,16);
  582. until shift=maxshift;
  583. reginited:=false;
  584. shift:=0;
  585. { can be optimized later to use more movn }
  586. repeat
  587. { leftover is shifterconst? (don't check if we can represent it just
  588. as effectively with movz/movk, as this check is expensive) }
  589. if ((shift<tcgsize2size[size]*(8 div 2)) and
  590. (word(a)<>0) and
  591. ((a shr 16)<>0)) and
  592. is_shifter_const(a shl shift,size) then
  593. begin
  594. if reginited then
  595. list.concat(taicpu.op_reg_reg_const(A_ORR,reg,reg,a shl shift))
  596. else
  597. list.concat(taicpu.op_reg_reg_const(A_ORR,reg,makeregsize(NR_XZR,size),a shl shift));
  598. exit;
  599. end;
  600. { set all 16 bit parts <> 0 }
  601. if (word(a)<>0) or
  602. ((shift=0) and
  603. (a=0)) then
  604. if shift=0 then
  605. begin
  606. list.concat(taicpu.op_reg_const(A_MOVZ,reg,word(a)));
  607. reginited:=true;
  608. end
  609. else
  610. begin
  611. shifterop_reset(so);
  612. so.shiftmode:=SM_LSL;
  613. so.shiftimm:=shift;
  614. if not reginited then
  615. begin
  616. opc:=A_MOVZ;
  617. reginited:=true;
  618. end
  619. else
  620. opc:=A_MOVK;
  621. list.concat(taicpu.op_reg_const_shifterop(opc,reg,word(a),so));
  622. end;
  623. preva:=a;
  624. a:=a shr 16;
  625. inc(shift,16);
  626. until word(preva)=preva;
  627. if not reginited then
  628. internalerror(2014102702);
  629. end;
  630. procedure tcgaarch64.a_load_const_ref(list: TAsmList; size: tcgsize; a: tcgint; const ref: treference);
  631. var
  632. reg: tregister;
  633. begin
  634. { use the zero register if possible }
  635. if a=0 then
  636. begin
  637. if size in [OS_64,OS_S64] then
  638. reg:=NR_XZR
  639. else
  640. reg:=NR_WZR;
  641. a_load_reg_ref(list,size,size,reg,ref);
  642. end
  643. else
  644. inherited;
  645. end;
  646. procedure tcgaarch64.a_load_reg_ref(list: TAsmList; fromsize, tosize: tcgsize; reg: tregister; const ref: treference);
  647. var
  648. oppostfix:toppostfix;
  649. hreg: tregister;
  650. begin
  651. if tcgsize2Size[fromsize]>=tcgsize2Size[tosize] then
  652. begin
  653. fromsize:=tosize;
  654. reg:=makeregsize(list,reg,fromsize);
  655. end
  656. { have a 32 bit register but need a 64 bit one? }
  657. else if tosize in [OS_64,OS_S64] then
  658. begin
  659. { sign extend if necessary }
  660. if fromsize in [OS_S8,OS_S16,OS_S32] then
  661. begin
  662. { can't overwrite reg, may be a constant reg }
  663. hreg:=getintregister(list,tosize);
  664. a_load_reg_reg(list,fromsize,tosize,reg,hreg);
  665. reg:=hreg;
  666. end
  667. else
  668. { top 32 bit are zero by default }
  669. reg:=makeregsize(reg,OS_64);
  670. fromsize:=tosize;
  671. end;
  672. if (ref.alignment<>0) and
  673. (ref.alignment<tcgsize2size[tosize]) then
  674. begin
  675. a_load_reg_ref_unaligned(list,fromsize,tosize,reg,ref);
  676. end
  677. else
  678. begin
  679. case tosize of
  680. { signed integer registers }
  681. OS_8,
  682. OS_S8:
  683. oppostfix:=PF_B;
  684. OS_16,
  685. OS_S16:
  686. oppostfix:=PF_H;
  687. OS_32,
  688. OS_S32,
  689. OS_64,
  690. OS_S64:
  691. oppostfix:=PF_None;
  692. else
  693. InternalError(200308299);
  694. end;
  695. handle_load_store(list,A_STR,tosize,oppostfix,reg,ref);
  696. end;
  697. end;
  698. procedure tcgaarch64.a_load_ref_reg(list: TAsmList; fromsize, tosize: tcgsize; const ref: treference; reg: tregister);
  699. var
  700. oppostfix:toppostfix;
  701. begin
  702. if tcgsize2Size[fromsize]>=tcgsize2Size[tosize] then
  703. fromsize:=tosize;
  704. { ensure that all bits of the 32/64 register are always correctly set:
  705. * default behaviour is always to zero-extend to the entire (64 bit)
  706. register -> unsigned 8/16/32 bit loads only exist with a 32 bit
  707. target register, as the upper 32 bit will be zeroed implicitly
  708. -> always make target register 32 bit
  709. * signed loads exist both with 32 and 64 bit target registers,
  710. depending on whether the value should be sign extended to 32 or
  711. to 64 bit (if sign extended to 32 bit, the upper 32 bits of the
  712. corresponding 64 bit register are again zeroed) -> no need to
  713. change anything (we only have 32 and 64 bit registers), except that
  714. when loading an OS_S32 to a 32 bit register, we don't need/can't
  715. use sign extension
  716. }
  717. if fromsize in [OS_8,OS_16,OS_32] then
  718. reg:=makeregsize(reg,OS_32);
  719. if (ref.alignment<>0) and
  720. (ref.alignment<tcgsize2size[fromsize]) then
  721. begin
  722. a_load_ref_reg_unaligned(list,fromsize,tosize,ref,reg);
  723. exit;
  724. end;
  725. case fromsize of
  726. { signed integer registers }
  727. OS_8:
  728. oppostfix:=PF_B;
  729. OS_S8:
  730. oppostfix:=PF_SB;
  731. OS_16:
  732. oppostfix:=PF_H;
  733. OS_S16:
  734. oppostfix:=PF_SH;
  735. OS_S32:
  736. if getsubreg(reg)=R_SUBD then
  737. oppostfix:=PF_NONE
  738. else
  739. oppostfix:=PF_SW;
  740. OS_32,
  741. OS_64,
  742. OS_S64:
  743. oppostfix:=PF_None;
  744. else
  745. InternalError(200308297);
  746. end;
  747. handle_load_store(list,A_LDR,fromsize,oppostfix,reg,ref);
  748. { clear upper 16 bits if the value was negative }
  749. if (fromsize=OS_S8) and (tosize=OS_16) then
  750. a_load_reg_reg(list,fromsize,tosize,reg,reg);
  751. end;
  752. procedure tcgaarch64.a_load_ref_reg_unaligned(list: TAsmList; fromsize, tosize: tcgsize; const ref: treference; register: tregister);
  753. var
  754. href: treference;
  755. hreg1, hreg2, tmpreg,tmpreg2: tregister;
  756. i : Integer;
  757. begin
  758. case fromsize of
  759. OS_64,OS_S64:
  760. begin
  761. { split into two 32 bit loads }
  762. hreg1:=getintregister(list,OS_32);
  763. hreg2:=getintregister(list,OS_32);
  764. if target_info.endian=endian_big then
  765. begin
  766. tmpreg:=hreg1;
  767. hreg1:=hreg2;
  768. hreg2:=tmpreg;
  769. end;
  770. { can we use LDP? }
  771. if (ref.alignment=4) and
  772. (simple_ref_type(A_LDP,OS_32,PF_None,ref)=sr_simple) then
  773. list.concat(taicpu.op_reg_reg_ref(A_LDP,hreg1,hreg2,ref))
  774. else
  775. begin
  776. a_load_ref_reg(list,OS_32,OS_32,ref,hreg1);
  777. href:=ref;
  778. inc(href.offset,4);
  779. a_load_ref_reg(list,OS_32,OS_32,href,hreg2);
  780. end;
  781. a_load_reg_reg(list,OS_32,OS_64,hreg1,register);
  782. list.concat(taicpu.op_reg_reg_const_const(A_BFI,register,makeregsize(hreg2,OS_64),32,32));
  783. end;
  784. OS_16,OS_S16,
  785. OS_32,OS_S32:
  786. begin
  787. if ref.alignment=2 then
  788. begin
  789. href:=ref;
  790. if target_info.endian=endian_big then
  791. inc(href.offset,tcgsize2size[fromsize]-2);
  792. tmpreg:=getintregister(list,OS_32);
  793. a_load_ref_reg(list,OS_16,OS_32,href,tmpreg);
  794. tmpreg2:=getintregister(list,OS_32);
  795. for i:=1 to (tcgsize2size[fromsize]-1) div 2 do
  796. begin
  797. if target_info.endian=endian_big then
  798. dec(href.offset,2)
  799. else
  800. inc(href.offset,2);
  801. a_load_ref_reg(list,OS_16,OS_32,href,tmpreg2);
  802. list.concat(taicpu.op_reg_reg_const_const(A_BFI,tmpreg,tmpreg2,i*16,16));
  803. end;
  804. a_load_reg_reg(list,fromsize,tosize,tmpreg,register);
  805. end
  806. else
  807. begin
  808. href:=ref;
  809. if target_info.endian=endian_big then
  810. inc(href.offset,tcgsize2size[fromsize]-1);
  811. tmpreg:=getintregister(list,OS_32);
  812. a_load_ref_reg(list,OS_8,OS_32,href,tmpreg);
  813. tmpreg2:=getintregister(list,OS_32);
  814. for i:=1 to tcgsize2size[fromsize]-1 do
  815. begin
  816. if target_info.endian=endian_big then
  817. dec(href.offset)
  818. else
  819. inc(href.offset);
  820. a_load_ref_reg(list,OS_8,OS_32,href,tmpreg2);
  821. list.concat(taicpu.op_reg_reg_const_const(A_BFI,tmpreg,tmpreg2,i*8,8));
  822. end;
  823. a_load_reg_reg(list,fromsize,tosize,tmpreg,register);
  824. end;
  825. end;
  826. else
  827. inherited;
  828. end;
  829. end;
  830. procedure tcgaarch64.a_load_reg_reg(list:TAsmList;fromsize,tosize:tcgsize;reg1,reg2:tregister);
  831. var
  832. instr: taicpu;
  833. begin
  834. { we use both 32 and 64 bit registers -> insert conversion when when
  835. we have to truncate/sign extend inside the (32 or 64 bit) register
  836. holding the value, and when we sign extend from a 32 to a 64 bit
  837. register }
  838. if (tcgsize2size[fromsize]>tcgsize2size[tosize]) or
  839. ((tcgsize2size[fromsize]=tcgsize2size[tosize]) and
  840. (fromsize<>tosize) and
  841. not(fromsize in [OS_32,OS_S32,OS_64,OS_S64])) or
  842. ((fromsize in [OS_S8,OS_S16,OS_S32]) and
  843. (tosize in [OS_64,OS_S64])) or
  844. { needs to mask out the sign in the top 16 bits }
  845. ((fromsize=OS_S8) and
  846. (tosize=OS_16)) then
  847. begin
  848. case tosize of
  849. OS_8:
  850. list.concat(setoppostfix(taicpu.op_reg_reg(A_UXT,reg2,makeregsize(reg1,OS_32)),PF_B));
  851. OS_16:
  852. list.concat(setoppostfix(taicpu.op_reg_reg(A_UXT,reg2,makeregsize(reg1,OS_32)),PF_H));
  853. OS_S8:
  854. list.concat(setoppostfix(taicpu.op_reg_reg(A_SXT,reg2,makeregsize(reg1,OS_32)),PF_B));
  855. OS_S16:
  856. list.concat(setoppostfix(taicpu.op_reg_reg(A_SXT,reg2,makeregsize(reg1,OS_32)),PF_H));
  857. { while "mov wN, wM" automatically inserts a zero-extension and
  858. hence we could encode a 64->32 bit move like that, the problem
  859. is that we then can't distinguish 64->32 from 32->32 moves, and
  860. the 64->32 truncation could be removed altogether... So use a
  861. different instruction }
  862. OS_32,
  863. OS_S32:
  864. { in theory, reg1 should be 64 bit here (since fromsize>tosize),
  865. but because of the way location_force_register() tries to
  866. avoid superfluous zero/sign extensions, it's not always the
  867. case -> also force reg1 to to 64 bit }
  868. list.concat(taicpu.op_reg_reg_const_const(A_UBFIZ,makeregsize(reg2,OS_64),makeregsize(reg1,OS_64),0,32));
  869. OS_64,
  870. OS_S64:
  871. list.concat(setoppostfix(taicpu.op_reg_reg(A_SXT,reg2,makeregsize(reg1,OS_32)),PF_W));
  872. else
  873. internalerror(2002090901);
  874. end;
  875. end
  876. else
  877. begin
  878. { 32 -> 32 bit move implies zero extension (sign extensions have
  879. been handled above) -> also use for 32 <-> 64 bit moves }
  880. if not(fromsize in [OS_64,OS_S64]) or
  881. not(tosize in [OS_64,OS_S64]) then
  882. instr:=taicpu.op_reg_reg(A_MOV,makeregsize(reg2,OS_32),makeregsize(reg1,OS_32))
  883. else
  884. instr:=taicpu.op_reg_reg(A_MOV,reg2,reg1);
  885. list.Concat(instr);
  886. { Notify the register allocator that we have written a move instruction so
  887. it can try to eliminate it. }
  888. add_move_instruction(instr);
  889. end;
  890. end;
  891. procedure tcgaarch64.a_loadaddr_ref_reg(list: TAsmList; const ref: treference; r: tregister);
  892. var
  893. href: treference;
  894. so: tshifterop;
  895. op: tasmop;
  896. begin
  897. op:=A_LDR;
  898. href:=ref;
  899. { simplify as if we're going to perform a regular 64 bit load, using
  900. "r" as the new base register if possible/necessary }
  901. make_simple_ref(list,op,OS_ADDR,PF_None,href,r);
  902. { load literal? }
  903. if assigned(href.symbol) then
  904. begin
  905. if (href.base<>NR_NO) or
  906. (href.index<>NR_NO) or
  907. not assigned(href.symboldata) then
  908. internalerror(2014110912);
  909. list.concat(taicpu.op_reg_sym_ofs(A_ADR,r,href.symbol,href.offset));
  910. end
  911. else
  912. begin
  913. if href.index<>NR_NO then
  914. begin
  915. if href.shiftmode<>SM_None then
  916. begin
  917. { "add" supports a supperset of the shift modes supported by
  918. load/store instructions }
  919. shifterop_reset(so);
  920. so.shiftmode:=href.shiftmode;
  921. so.shiftimm:=href.shiftimm;
  922. list.concat(taicpu.op_reg_reg_reg_shifterop(A_ADD,r,href.base,href.index,so));
  923. end
  924. else
  925. a_op_reg_reg_reg(list,OP_ADD,OS_ADDR,href.index,href.base,r);
  926. end
  927. else if href.offset<>0 then
  928. a_op_const_reg_reg(list,OP_ADD,OS_ADDR,href.offset,href.base,r)
  929. else
  930. a_load_reg_reg(list,OS_ADDR,OS_ADDR,href.base,r);
  931. end;
  932. end;
  933. procedure tcgaarch64.a_loadfpu_reg_reg(list: TAsmList; fromsize, tosize: tcgsize; reg1, reg2: tregister);
  934. begin
  935. internalerror(2014122107)
  936. end;
  937. procedure tcgaarch64.a_loadfpu_ref_reg(list: TAsmList; fromsize, tosize: tcgsize; const ref: treference; reg: tregister);
  938. begin
  939. internalerror(2014122108)
  940. end;
  941. procedure tcgaarch64.a_loadfpu_reg_ref(list: TAsmList; fromsize, tosize: tcgsize; reg: tregister; const ref: treference);
  942. begin
  943. internalerror(2014122109)
  944. end;
  945. procedure tcgaarch64.a_loadmm_reg_reg(list: TAsmList; fromsize, tosize: tcgsize; reg1, reg2: tregister; shuffle: pmmshuffle);
  946. var
  947. instr: taicpu;
  948. begin
  949. if assigned(shuffle) and
  950. not shufflescalar(shuffle) then
  951. internalerror(2014122104);
  952. if fromsize=tosize then
  953. begin
  954. instr:=taicpu.op_reg_reg(A_FMOV,reg2,reg1);
  955. { Notify the register allocator that we have written a move
  956. instruction so it can try to eliminate it. }
  957. add_move_instruction(instr);
  958. end
  959. else
  960. begin
  961. if (reg_cgsize(reg1)<>fromsize) or
  962. (reg_cgsize(reg2)<>tosize) then
  963. internalerror(2014110913);
  964. instr:=taicpu.op_reg_reg(A_FCVT,reg2,reg1);
  965. end;
  966. list.Concat(instr);
  967. end;
  968. procedure tcgaarch64.a_loadmm_ref_reg(list: TAsmList; fromsize, tosize: tcgsize; const ref: treference; reg: tregister; shuffle: pmmshuffle);
  969. var
  970. tmpreg: tregister;
  971. begin
  972. if assigned(shuffle) and
  973. not shufflescalar(shuffle) then
  974. internalerror(2014122105);
  975. tmpreg:=NR_NO;
  976. if (fromsize<>tosize) then
  977. begin
  978. tmpreg:=reg;
  979. reg:=getmmregister(list,fromsize);
  980. end;
  981. handle_load_store(list,A_LDR,fromsize,PF_None,reg,ref);
  982. if (fromsize<>tosize) then
  983. a_loadmm_reg_reg(list,fromsize,tosize,reg,tmpreg,nil);
  984. end;
  985. procedure tcgaarch64.a_loadmm_reg_ref(list: TAsmList; fromsize, tosize: tcgsize; reg: tregister; const ref: treference; shuffle: pmmshuffle);
  986. var
  987. tmpreg: tregister;
  988. begin
  989. if assigned(shuffle) and
  990. not shufflescalar(shuffle) then
  991. internalerror(2014122106);
  992. if (fromsize<>tosize) then
  993. begin
  994. tmpreg:=getmmregister(list,tosize);
  995. a_loadmm_reg_reg(list,fromsize,tosize,reg,tmpreg,nil);
  996. reg:=tmpreg;
  997. end;
  998. handle_load_store(list,A_STR,tosize,PF_NONE,reg,ref);
  999. end;
  1000. procedure tcgaarch64.a_loadmm_intreg_reg(list: TAsmList; fromsize, tosize: tcgsize; intreg, mmreg: tregister; shuffle: pmmshuffle);
  1001. begin
  1002. if not shufflescalar(shuffle) then
  1003. internalerror(2014122801);
  1004. if not(tcgsize2size[fromsize] in [4,8]) or
  1005. (tcgsize2size[fromsize]<>tcgsize2size[tosize]) then
  1006. internalerror(2014122803);
  1007. list.concat(taicpu.op_reg_reg(A_INS,mmreg,intreg));
  1008. end;
  1009. procedure tcgaarch64.a_loadmm_reg_intreg(list: TAsmList; fromsize, tosize: tcgsize; mmreg, intreg: tregister; shuffle: pmmshuffle);
  1010. var
  1011. r : tregister;
  1012. begin
  1013. if not shufflescalar(shuffle) then
  1014. internalerror(2014122802);
  1015. if not(tcgsize2size[fromsize] in [4,8]) or
  1016. (tcgsize2size[fromsize]>tcgsize2size[tosize]) then
  1017. internalerror(2014122804);
  1018. if tcgsize2size[fromsize]<tcgsize2size[tosize] then
  1019. r:=makeregsize(intreg,fromsize)
  1020. else
  1021. r:=intreg;
  1022. list.concat(taicpu.op_reg_reg(A_UMOV,r,mmreg));
  1023. end;
  1024. procedure tcgaarch64.a_opmm_reg_reg(list: TAsmList; Op: TOpCG; size: tcgsize; src, dst: tregister; shuffle: pmmshuffle);
  1025. begin
  1026. case op of
  1027. { "xor Vx,Vx" is used to initialize global regvars to 0 }
  1028. OP_XOR:
  1029. begin
  1030. if (src<>dst) or
  1031. (reg_cgsize(src)<>size) or
  1032. assigned(shuffle) then
  1033. internalerror(2015011401);
  1034. case size of
  1035. OS_F32,
  1036. OS_F64:
  1037. list.concat(taicpu.op_reg_const(A_MOVI,makeregsize(dst,OS_F64),0));
  1038. else
  1039. internalerror(2015011402);
  1040. end;
  1041. end
  1042. else
  1043. internalerror(2015011403);
  1044. end;
  1045. end;
  1046. procedure tcgaarch64.a_bit_scan_reg_reg(list: TAsmList; reverse: boolean; srcsize, dstsize: tcgsize; src, dst: TRegister);
  1047. var
  1048. bitsize: longint;
  1049. begin
  1050. if srcsize in [OS_64,OS_S64] then
  1051. begin
  1052. bitsize:=64;
  1053. end
  1054. else
  1055. begin
  1056. bitsize:=32;
  1057. end;
  1058. { source is 0 -> dst will have to become 255 }
  1059. list.concat(taicpu.op_reg_const(A_CMP,src,0));
  1060. if reverse then
  1061. begin
  1062. list.Concat(taicpu.op_reg_reg(A_CLZ,makeregsize(dst,srcsize),src));
  1063. { xor 31/63 is the same as setting the lower 5/6 bits to
  1064. "31/63-(lower 5/6 bits of dst)" }
  1065. list.Concat(taicpu.op_reg_reg_const(A_EOR,dst,dst,bitsize-1));
  1066. end
  1067. else
  1068. begin
  1069. list.Concat(taicpu.op_reg_reg(A_RBIT,makeregsize(dst,srcsize),src));
  1070. list.Concat(taicpu.op_reg_reg(A_CLZ,dst,dst));
  1071. end;
  1072. { set dst to -1 if src was 0 }
  1073. list.Concat(taicpu.op_reg_reg_reg_cond(A_CSINV,dst,dst,makeregsize(NR_XZR,dstsize),C_NE));
  1074. { mask the -1 to 255 if src was 0 (anyone find a two-instruction
  1075. branch-free version? All of mine are 3...) }
  1076. list.Concat(setoppostfix(taicpu.op_reg_reg(A_UXT,makeregsize(dst,OS_32),makeregsize(dst,OS_32)),PF_B));
  1077. end;
  1078. procedure tcgaarch64.a_load_reg_ref_unaligned(list: TAsmList; fromsize, tosize: tcgsize; register: tregister; const ref: treference);
  1079. var
  1080. href: treference;
  1081. hreg1, hreg2, tmpreg: tregister;
  1082. begin
  1083. if fromsize in [OS_64,OS_S64] then
  1084. begin
  1085. { split into two 32 bit stores }
  1086. hreg1:=getintregister(list,OS_32);
  1087. hreg2:=getintregister(list,OS_32);
  1088. a_load_reg_reg(list,OS_32,OS_32,makeregsize(register,OS_32),hreg1);
  1089. a_op_const_reg_reg(list,OP_SHR,OS_64,32,register,makeregsize(hreg2,OS_64));
  1090. if target_info.endian=endian_big then
  1091. begin
  1092. tmpreg:=hreg1;
  1093. hreg1:=hreg2;
  1094. hreg2:=tmpreg;
  1095. end;
  1096. { can we use STP? }
  1097. if (ref.alignment=4) and
  1098. (simple_ref_type(A_STP,OS_32,PF_None,ref)=sr_simple) then
  1099. list.concat(taicpu.op_reg_reg_ref(A_STP,hreg1,hreg2,ref))
  1100. else
  1101. begin
  1102. a_load_reg_ref(list,OS_32,OS_32,hreg1,ref);
  1103. href:=ref;
  1104. inc(href.offset,4);
  1105. a_load_reg_ref(list,OS_32,OS_32,hreg2,href);
  1106. end;
  1107. end
  1108. else
  1109. inherited;
  1110. end;
  1111. procedure tcgaarch64.maybeadjustresult(list: TAsmList; op: topcg; size: tcgsize; dst: tregister);
  1112. const
  1113. overflowops = [OP_MUL,OP_IMUL,OP_SHL,OP_ADD,OP_SUB,OP_NOT,OP_NEG];
  1114. begin
  1115. if (op in overflowops) and
  1116. (size in [OS_8,OS_S8,OS_16,OS_S16]) then
  1117. a_load_reg_reg(list,OS_32,size,makeregsize(dst,OS_32),makeregsize(dst,OS_32))
  1118. end;
  1119. procedure tcgaarch64.a_op_const_reg(list: TAsmList; op: topcg; size: tcgsize; a: tcgint; reg: tregister);
  1120. begin
  1121. optimize_op_const(size,op,a);
  1122. case op of
  1123. OP_NONE:
  1124. exit;
  1125. OP_MOVE:
  1126. a_load_const_reg(list,size,a,reg);
  1127. OP_NEG,OP_NOT:
  1128. internalerror(200306011);
  1129. else
  1130. a_op_const_reg_reg(list,op,size,a,reg,reg);
  1131. end;
  1132. end;
  1133. procedure tcgaarch64.a_op_reg_reg(list:TAsmList;op:topcg;size:tcgsize;src,dst:tregister);
  1134. begin
  1135. Case op of
  1136. OP_NEG,
  1137. OP_NOT:
  1138. begin
  1139. list.concat(taicpu.op_reg_reg(TOpCG2AsmOpReg[op],dst,src));
  1140. maybeadjustresult(list,op,size,dst);
  1141. end
  1142. else
  1143. a_op_reg_reg_reg(list,op,size,src,dst,dst);
  1144. end;
  1145. end;
  1146. procedure tcgaarch64.a_op_const_reg_reg(list: TAsmList; op: topcg; size: tcgsize; a: tcgint; src, dst: tregister);
  1147. var
  1148. l: tlocation;
  1149. begin
  1150. a_op_const_reg_reg_checkoverflow(list,op,size,a,src,dst,false,l);
  1151. end;
  1152. procedure tcgaarch64.a_op_reg_reg_reg(list: TAsmList; op: topcg; size: tcgsize; src1, src2, dst: tregister);
  1153. var
  1154. hreg: tregister;
  1155. begin
  1156. { no ROLV opcode... }
  1157. if op=OP_ROL then
  1158. begin
  1159. case size of
  1160. OS_32,OS_S32,
  1161. OS_64,OS_S64:
  1162. begin
  1163. hreg:=getintregister(list,size);
  1164. a_load_const_reg(list,size,tcgsize2size[size]*8,hreg);
  1165. a_op_reg_reg(list,OP_SUB,size,src1,hreg);
  1166. a_op_reg_reg_reg(list,OP_ROR,size,hreg,src2,dst);
  1167. exit;
  1168. end;
  1169. else
  1170. internalerror(2014111005);
  1171. end;
  1172. end
  1173. else if (op=OP_ROR) and
  1174. not(size in [OS_32,OS_S32,OS_64,OS_S64]) then
  1175. internalerror(2014111006);
  1176. if TOpCG2AsmOpReg[op]=A_NONE then
  1177. internalerror(2014111007);
  1178. list.concat(taicpu.op_reg_reg_reg(TOpCG2AsmOpReg[op],dst,src2,src1));
  1179. maybeadjustresult(list,op,size,dst);
  1180. end;
  1181. procedure tcgaarch64.a_op_const_reg_reg_checkoverflow(list: TAsmList; op: topcg; size: tcgsize; a: tcgint; src, dst: tregister; setflags : boolean; var ovloc : tlocation);
  1182. var
  1183. shiftcountmask: longint;
  1184. constreg: tregister;
  1185. begin
  1186. { add/sub instructions have only positive immediate operands }
  1187. if (op in [OP_ADD,OP_SUB]) and
  1188. (a<0) then
  1189. begin
  1190. if op=OP_ADD then
  1191. op:=op_SUB
  1192. else
  1193. op:=OP_ADD;
  1194. { avoid range/overflow error in case a = low(tcgint) }
  1195. {$push}{$r-}{$q-}
  1196. a:=-a;
  1197. {$pop}
  1198. end;
  1199. ovloc.loc:=LOC_VOID;
  1200. optimize_op_const(size,op,a);
  1201. case op of
  1202. OP_NONE:
  1203. begin
  1204. a_load_reg_reg(list,size,size,src,dst);
  1205. exit;
  1206. end;
  1207. OP_MOVE:
  1208. begin
  1209. a_load_const_reg(list,size,a,dst);
  1210. exit;
  1211. end;
  1212. end;
  1213. case op of
  1214. OP_ADD,
  1215. OP_SUB:
  1216. begin
  1217. handle_reg_imm12_reg(list,TOpCG2AsmOpImm[op],size,src,a,dst,NR_NO,setflags,true);
  1218. { on a 64 bit target, overflows with smaller data types
  1219. are handled via range errors }
  1220. if setflags and
  1221. (size in [OS_64,OS_S64]) then
  1222. begin
  1223. location_reset(ovloc,LOC_FLAGS,OS_8);
  1224. if size=OS_64 then
  1225. if op=OP_ADD then
  1226. ovloc.resflags:=F_CS
  1227. else
  1228. ovloc.resflags:=F_CC
  1229. else
  1230. ovloc.resflags:=F_VS;
  1231. end;
  1232. end;
  1233. OP_OR,
  1234. OP_AND,
  1235. OP_XOR:
  1236. begin
  1237. if not(size in [OS_64,OS_S64]) then
  1238. a:=cardinal(a);
  1239. if is_shifter_const(a,size) then
  1240. list.concat(taicpu.op_reg_reg_const(TOpCG2AsmOpReg[op],dst,src,a))
  1241. else
  1242. begin
  1243. constreg:=getintregister(list,size);
  1244. a_load_const_reg(list,size,a,constreg);
  1245. a_op_reg_reg_reg(list,op,size,constreg,src,dst);
  1246. end;
  1247. end;
  1248. OP_SHL,
  1249. OP_SHR,
  1250. OP_SAR:
  1251. begin
  1252. if size in [OS_64,OS_S64] then
  1253. shiftcountmask:=63
  1254. else
  1255. shiftcountmask:=31;
  1256. if (a and shiftcountmask)<>0 Then
  1257. list.concat(taicpu.op_reg_reg_const(
  1258. TOpCG2AsmOpImm[Op],dst,src,a and shiftcountmask))
  1259. else
  1260. a_load_reg_reg(list,size,size,src,dst);
  1261. if (a and not(tcgint(shiftcountmask)))<>0 then
  1262. internalError(2014112101);
  1263. end;
  1264. OP_ROL,
  1265. OP_ROR:
  1266. begin
  1267. case size of
  1268. OS_32,OS_S32:
  1269. if (a and not(tcgint(31)))<>0 then
  1270. internalError(2014112102);
  1271. OS_64,OS_S64:
  1272. if (a and not(tcgint(63)))<>0 then
  1273. internalError(2014112103);
  1274. else
  1275. internalError(2014112104);
  1276. end;
  1277. { there's only a ror opcode }
  1278. if op=OP_ROL then
  1279. a:=(tcgsize2size[size]*8)-a;
  1280. list.concat(taicpu.op_reg_reg_const(A_ROR,dst,src,a));
  1281. end;
  1282. OP_MUL,
  1283. OP_IMUL,
  1284. OP_DIV,
  1285. OP_IDIV:
  1286. begin
  1287. constreg:=getintregister(list,size);
  1288. a_load_const_reg(list,size,a,constreg);
  1289. a_op_reg_reg_reg_checkoverflow(list,op,size,constreg,src,dst,setflags,ovloc);
  1290. end;
  1291. else
  1292. internalerror(2014111403);
  1293. end;
  1294. maybeadjustresult(list,op,size,dst);
  1295. end;
  1296. procedure tcgaarch64.a_op_reg_reg_reg_checkoverflow(list: TAsmList; op: topcg; size: tcgsize; src1, src2, dst: tregister; setflags : boolean; var ovloc : tlocation);
  1297. var
  1298. tmpreg1, tmpreg2: tregister;
  1299. begin
  1300. ovloc.loc:=LOC_VOID;
  1301. { overflow can only occur with 64 bit calculations on 64 bit cpus }
  1302. if setflags and
  1303. (size in [OS_64,OS_S64]) then
  1304. begin
  1305. case op of
  1306. OP_ADD,
  1307. OP_SUB:
  1308. begin
  1309. list.concat(setoppostfix(taicpu.op_reg_reg_reg(TOpCG2AsmOpReg[op],dst,src2,src1),PF_S));
  1310. ovloc.loc:=LOC_FLAGS;
  1311. if size=OS_64 then
  1312. if op=OP_ADD then
  1313. ovloc.resflags:=F_CS
  1314. else
  1315. ovloc.resflags:=F_CC
  1316. else
  1317. ovloc.resflags:=F_VS;
  1318. { finished }
  1319. exit;
  1320. end;
  1321. OP_MUL:
  1322. begin
  1323. { check whether the upper 64 bit of the 128 bit product is 0 }
  1324. tmpreg1:=getintregister(list,OS_64);
  1325. list.concat(taicpu.op_reg_reg_reg(A_UMULH,tmpreg1,src2,src1));
  1326. list.concat(taicpu.op_reg_const(A_CMP,tmpreg1,0));
  1327. ovloc.loc:=LOC_FLAGS;
  1328. ovloc.resflags:=F_NE;
  1329. { still have to perform the actual multiplication }
  1330. end;
  1331. OP_IMUL:
  1332. begin
  1333. { check whether the upper 64 bits of the 128 bit multiplication
  1334. result have the same value as the replicated sign bit of the
  1335. lower 64 bits }
  1336. tmpreg1:=getintregister(list,OS_64);
  1337. list.concat(taicpu.op_reg_reg_reg(A_SMULH,tmpreg1,src2,src1));
  1338. { calculate lower 64 bits (afterwards, because dst may be
  1339. equal to src1 or src2) }
  1340. a_op_reg_reg_reg(list,op,size,src1,src2,dst);
  1341. { replicate sign bit }
  1342. tmpreg2:=getintregister(list,OS_64);
  1343. a_op_const_reg_reg(list,OP_SAR,OS_S64,63,dst,tmpreg2);
  1344. list.concat(taicpu.op_reg_reg(A_CMP,tmpreg1,tmpreg2));
  1345. ovloc.loc:=LOC_FLAGS;
  1346. ovloc.resflags:=F_NE;
  1347. { finished }
  1348. exit;
  1349. end;
  1350. OP_IDIV,
  1351. OP_DIV:
  1352. begin
  1353. { not handled here, needs div-by-zero check (dividing by zero
  1354. just gives a 0 result on aarch64), and low(int64) div -1
  1355. check for overflow) }
  1356. internalerror(2014122101);
  1357. end;
  1358. end;
  1359. end;
  1360. a_op_reg_reg_reg(list,op,size,src1,src2,dst);
  1361. end;
  1362. {*************** compare instructructions ****************}
  1363. procedure tcgaarch64.a_cmp_const_reg_label(list: TAsmList; size: tcgsize; cmp_op: topcmp; a: tcgint; reg: tregister; l: tasmlabel);
  1364. var
  1365. op: tasmop;
  1366. begin
  1367. if a>=0 then
  1368. op:=A_CMP
  1369. else
  1370. op:=A_CMN;
  1371. { avoid range/overflow error in case a=low(tcgint) }
  1372. {$push}{$r-}{$q-}
  1373. handle_reg_imm12_reg(list,op,size,reg,abs(a),NR_XZR,NR_NO,false,false);
  1374. {$pop}
  1375. a_jmp_cond(list,cmp_op,l);
  1376. end;
  1377. procedure tcgaarch64.a_cmp_reg_reg_label(list: TAsmList; size: tcgsize; cmp_op: topcmp; reg1,reg2: tregister; l: tasmlabel);
  1378. begin
  1379. list.concat(taicpu.op_reg_reg(A_CMP,reg2,reg1));
  1380. a_jmp_cond(list,cmp_op,l);
  1381. end;
  1382. procedure tcgaarch64.a_jmp_always(list: TAsmList; l: TAsmLabel);
  1383. var
  1384. ai: taicpu;
  1385. begin
  1386. ai:=TAiCpu.op_sym(A_B,current_asmdata.RefAsmSymbol(l.name,AT_FUNCTION));
  1387. ai.is_jmp:=true;
  1388. list.Concat(ai);
  1389. end;
  1390. procedure tcgaarch64.a_jmp_name(list: TAsmList; const s: string);
  1391. var
  1392. ai: taicpu;
  1393. begin
  1394. ai:=TAiCpu.op_sym(A_B,current_asmdata.RefAsmSymbol(s,AT_FUNCTION));
  1395. ai.is_jmp:=true;
  1396. list.Concat(ai);
  1397. end;
  1398. procedure tcgaarch64.a_jmp_cond(list: TAsmList; cond: TOpCmp; l: TAsmLabel);
  1399. var
  1400. ai: taicpu;
  1401. begin
  1402. ai:=TAiCpu.op_sym(A_B,l);
  1403. ai.is_jmp:=true;
  1404. ai.SetCondition(TOpCmp2AsmCond[cond]);
  1405. list.Concat(ai);
  1406. end;
  1407. procedure tcgaarch64.a_jmp_flags(list: TAsmList; const f: tresflags; l: tasmlabel);
  1408. var
  1409. ai : taicpu;
  1410. begin
  1411. ai:=Taicpu.op_sym(A_B,l);
  1412. ai.is_jmp:=true;
  1413. ai.SetCondition(flags_to_cond(f));
  1414. list.Concat(ai);
  1415. end;
  1416. procedure tcgaarch64.g_flags2reg(list: TAsmList; size: tcgsize; const f: tresflags; reg: tregister);
  1417. begin
  1418. list.concat(taicpu.op_reg_cond(A_CSET,reg,flags_to_cond(f)));
  1419. end;
  1420. procedure tcgaarch64.g_overflowcheck(list: TAsmList; const loc: tlocation; def: tdef);
  1421. begin
  1422. { we need an explicit overflow location, because there are many
  1423. possibilities (not just the overflow flag, which is only used for
  1424. signed add/sub) }
  1425. internalerror(2014112303);
  1426. end;
  1427. procedure tcgaarch64.g_overflowcheck_loc(list: TAsmList; const loc: tlocation; def: tdef; ovloc : tlocation);
  1428. var
  1429. hl : tasmlabel;
  1430. hflags : tresflags;
  1431. begin
  1432. if not(cs_check_overflow in current_settings.localswitches) then
  1433. exit;
  1434. current_asmdata.getjumplabel(hl);
  1435. case ovloc.loc of
  1436. LOC_FLAGS:
  1437. begin
  1438. hflags:=ovloc.resflags;
  1439. inverse_flags(hflags);
  1440. cg.a_jmp_flags(list,hflags,hl);
  1441. end;
  1442. else
  1443. internalerror(2014112304);
  1444. end;
  1445. a_call_name(list,'FPC_OVERFLOW',false);
  1446. a_label(list,hl);
  1447. end;
  1448. { *********** entry/exit code and address loading ************ }
  1449. function tcgaarch64.save_regs(list: TAsmList; rt: tregistertype; lowsr, highsr: tsuperregister; sub: tsubregister): longint;
  1450. var
  1451. ref: treference;
  1452. sr: tsuperregister;
  1453. pairreg: tregister;
  1454. begin
  1455. result:=0;
  1456. reference_reset_base(ref,NR_SP,-16,ctempposinvalid,16,[]);
  1457. ref.addressmode:=AM_PREINDEXED;
  1458. pairreg:=NR_NO;
  1459. { store all used registers pairwise }
  1460. for sr:=lowsr to highsr do
  1461. if sr in rg[rt].used_in_proc then
  1462. if pairreg=NR_NO then
  1463. pairreg:=newreg(rt,sr,sub)
  1464. else
  1465. begin
  1466. inc(result,16);
  1467. list.concat(taicpu.op_reg_reg_ref(A_STP,pairreg,newreg(rt,sr,sub),ref));
  1468. pairreg:=NR_NO
  1469. end;
  1470. { one left -> store twice (stack must be 16 bytes aligned) }
  1471. if pairreg<>NR_NO then
  1472. begin
  1473. list.concat(taicpu.op_reg_reg_ref(A_STP,pairreg,pairreg,ref));
  1474. inc(result,16);
  1475. end;
  1476. end;
  1477. procedure FixupOffsets(p:TObject;arg:pointer);
  1478. var
  1479. sym: tabstractnormalvarsym absolute p;
  1480. begin
  1481. if (tsym(p).typ in [paravarsym,localvarsym]) and
  1482. (sym.localloc.loc=LOC_REFERENCE) and
  1483. (sym.localloc.reference.base=NR_STACK_POINTER_REG) then
  1484. begin
  1485. sym.localloc.reference.base:=NR_FRAME_POINTER_REG;
  1486. dec(sym.localloc.reference.offset,PLongint(arg)^);
  1487. end;
  1488. end;
  1489. procedure tcgaarch64.g_proc_entry(list: TAsmList; localsize: longint; nostackframe: boolean);
  1490. var
  1491. ref: treference;
  1492. totalstackframesize: longint;
  1493. begin
  1494. if nostackframe then
  1495. exit;
  1496. { stack pointer has to be aligned to 16 bytes at all times }
  1497. localsize:=align(localsize,16);
  1498. { save stack pointer and return address }
  1499. reference_reset_base(ref,NR_SP,-16,ctempposinvalid,16,[]);
  1500. ref.addressmode:=AM_PREINDEXED;
  1501. list.concat(taicpu.op_reg_reg_ref(A_STP,NR_FP,NR_LR,ref));
  1502. { initialise frame pointer }
  1503. a_load_reg_reg(list,OS_ADDR,OS_ADDR,NR_SP,NR_FP);
  1504. totalstackframesize:=localsize;
  1505. { save modified integer registers }
  1506. inc(totalstackframesize,
  1507. save_regs(list,R_INTREGISTER,RS_X19,RS_X28,R_SUBWHOLE));
  1508. { only the lower 64 bits of the modified vector registers need to be
  1509. saved; if the caller needs the upper 64 bits, it has to save them
  1510. itself }
  1511. inc(totalstackframesize,
  1512. save_regs(list,R_MMREGISTER,RS_D8,RS_D15,R_SUBMMD));
  1513. { allocate stack space }
  1514. if localsize<>0 then
  1515. begin
  1516. localsize:=align(localsize,16);
  1517. current_procinfo.final_localsize:=localsize;
  1518. handle_reg_imm12_reg(list,A_SUB,OS_ADDR,NR_SP,localsize,NR_SP,NR_IP0,false,true);
  1519. end;
  1520. { By default, we use the frame pointer to access parameters passed via
  1521. the stack and the stack pointer to address local variables and temps
  1522. because
  1523. a) we can use bigger positive than negative offsets (so accessing
  1524. locals via negative offsets from the frame pointer would be less
  1525. efficient)
  1526. b) we don't know the local size while generating the code, so
  1527. accessing the parameters via the stack pointer is not possible
  1528. without copying them
  1529. The problem with this is the get_frame() intrinsic:
  1530. a) it must return the same value as what we pass as parentfp
  1531. parameter, since that's how it's used in the TP-style objects unit
  1532. b) its return value must usable to access all local data from a
  1533. routine (locals and parameters), since it's all the nested
  1534. routines have access to
  1535. c) its return value must be usable to construct a backtrace, as it's
  1536. also used by the exception handling routines
  1537. The solution we use here, based on something similar that's done in
  1538. the MIPS port, is to generate all accesses to locals in the routine
  1539. itself SP-relative, and then after the code is generated and the local
  1540. size is known (namely, here), we change all SP-relative variables/
  1541. parameters into FP-relative ones. This means that they'll be accessed
  1542. less efficiently from nested routines, but those accesses are indirect
  1543. anyway and at least this way they can be accessed at all
  1544. }
  1545. if current_procinfo.has_nestedprocs then
  1546. begin
  1547. current_procinfo.procdef.localst.SymList.ForEachCall(@FixupOffsets,@totalstackframesize);
  1548. current_procinfo.procdef.parast.SymList.ForEachCall(@FixupOffsets,@totalstackframesize);
  1549. end;
  1550. end;
  1551. procedure tcgaarch64.g_maybe_got_init(list : TAsmList);
  1552. begin
  1553. { nothing to do on Darwin or Linux }
  1554. end;
  1555. procedure tcgaarch64.g_restore_registers(list:TAsmList);
  1556. begin
  1557. { done in g_proc_exit }
  1558. end;
  1559. procedure tcgaarch64.load_regs(list: TAsmList; rt: tregistertype; lowsr, highsr: tsuperregister; sub: tsubregister);
  1560. var
  1561. ref: treference;
  1562. sr, highestsetsr: tsuperregister;
  1563. pairreg: tregister;
  1564. regcount: longint;
  1565. begin
  1566. reference_reset_base(ref,NR_SP,16,ctempposinvalid,16,[]);
  1567. ref.addressmode:=AM_POSTINDEXED;
  1568. { highest reg stored twice? }
  1569. regcount:=0;
  1570. highestsetsr:=RS_NO;
  1571. for sr:=lowsr to highsr do
  1572. if sr in rg[rt].used_in_proc then
  1573. begin
  1574. inc(regcount);
  1575. highestsetsr:=sr;
  1576. end;
  1577. if odd(regcount) then
  1578. begin
  1579. list.concat(taicpu.op_reg_ref(A_LDR,newreg(rt,highestsetsr,sub),ref));
  1580. highestsetsr:=pred(highestsetsr);
  1581. end;
  1582. { load all (other) used registers pairwise }
  1583. pairreg:=NR_NO;
  1584. for sr:=highestsetsr downto lowsr do
  1585. if sr in rg[rt].used_in_proc then
  1586. if pairreg=NR_NO then
  1587. pairreg:=newreg(rt,sr,sub)
  1588. else
  1589. begin
  1590. list.concat(taicpu.op_reg_reg_ref(A_LDP,newreg(rt,sr,sub),pairreg,ref));
  1591. pairreg:=NR_NO
  1592. end;
  1593. { There can't be any register left }
  1594. if pairreg<>NR_NO then
  1595. internalerror(2014112602);
  1596. end;
  1597. procedure tcgaarch64.g_proc_exit(list : TAsmList;parasize:longint;nostackframe:boolean);
  1598. var
  1599. ref: treference;
  1600. regsstored: boolean;
  1601. sr: tsuperregister;
  1602. begin
  1603. if not nostackframe then
  1604. begin
  1605. { if no registers have been stored, we don't have to subtract the
  1606. allocated temp space from the stack pointer }
  1607. regsstored:=false;
  1608. for sr:=RS_X19 to RS_X28 do
  1609. if sr in rg[R_INTREGISTER].used_in_proc then
  1610. begin
  1611. regsstored:=true;
  1612. break;
  1613. end;
  1614. if not regsstored then
  1615. for sr:=RS_D8 to RS_D15 do
  1616. if sr in rg[R_MMREGISTER].used_in_proc then
  1617. begin
  1618. regsstored:=true;
  1619. break;
  1620. end;
  1621. { restore registers (and stack pointer) }
  1622. if regsstored then
  1623. begin
  1624. if current_procinfo.final_localsize<>0 then
  1625. handle_reg_imm12_reg(list,A_ADD,OS_ADDR,NR_SP,current_procinfo.final_localsize,NR_SP,NR_IP0,false,true);
  1626. load_regs(list,R_MMREGISTER,RS_D8,RS_D15,R_SUBMMD);
  1627. load_regs(list,R_INTREGISTER,RS_X19,RS_X28,R_SUBWHOLE);
  1628. end
  1629. else if current_procinfo.final_localsize<>0 then
  1630. { restore stack pointer }
  1631. a_load_reg_reg(list,OS_ADDR,OS_ADDR,NR_FP,NR_SP);
  1632. { restore framepointer and return address }
  1633. reference_reset_base(ref,NR_SP,16,ctempposinvalid,16,[]);
  1634. ref.addressmode:=AM_POSTINDEXED;
  1635. list.concat(taicpu.op_reg_reg_ref(A_LDP,NR_FP,NR_LR,ref));
  1636. end;
  1637. { return }
  1638. list.concat(taicpu.op_none(A_RET));
  1639. end;
  1640. procedure tcgaarch64.g_save_registers(list : TAsmList);
  1641. begin
  1642. { done in g_proc_entry }
  1643. end;
  1644. { ************* concatcopy ************ }
  1645. procedure tcgaarch64.g_concatcopy_move(list : TAsmList;const source,dest : treference;len : tcgint);
  1646. var
  1647. paraloc1,paraloc2,paraloc3 : TCGPara;
  1648. pd : tprocdef;
  1649. begin
  1650. pd:=search_system_proc('MOVE');
  1651. paraloc1.init;
  1652. paraloc2.init;
  1653. paraloc3.init;
  1654. paramanager.getintparaloc(list,pd,1,paraloc1);
  1655. paramanager.getintparaloc(list,pd,2,paraloc2);
  1656. paramanager.getintparaloc(list,pd,3,paraloc3);
  1657. a_load_const_cgpara(list,OS_SINT,len,paraloc3);
  1658. a_loadaddr_ref_cgpara(list,dest,paraloc2);
  1659. a_loadaddr_ref_cgpara(list,source,paraloc1);
  1660. paramanager.freecgpara(list,paraloc3);
  1661. paramanager.freecgpara(list,paraloc2);
  1662. paramanager.freecgpara(list,paraloc1);
  1663. alloccpuregisters(list,R_INTREGISTER,paramanager.get_volatile_registers_int(pocall_default));
  1664. alloccpuregisters(list,R_MMREGISTER,paramanager.get_volatile_registers_mm(pocall_default));
  1665. a_call_name(list,'FPC_MOVE',false);
  1666. dealloccpuregisters(list,R_MMREGISTER,paramanager.get_volatile_registers_mm(pocall_default));
  1667. dealloccpuregisters(list,R_INTREGISTER,paramanager.get_volatile_registers_int(pocall_default));
  1668. paraloc3.done;
  1669. paraloc2.done;
  1670. paraloc1.done;
  1671. end;
  1672. procedure tcgaarch64.g_concatcopy(list: TAsmList; const source, dest: treference; len: tcgint);
  1673. var
  1674. sourcebasereplaced, destbasereplaced: boolean;
  1675. { get optimal memory operation to use for loading/storing data
  1676. in an unrolled loop }
  1677. procedure getmemop(scaledop, unscaledop: tasmop; const startref, endref: treference; opsize: tcgsize; postfix: toppostfix; out memop: tasmop; out needsimplify: boolean);
  1678. begin
  1679. if (simple_ref_type(scaledop,opsize,postfix,startref)=sr_simple) and
  1680. (simple_ref_type(scaledop,opsize,postfix,endref)=sr_simple) then
  1681. begin
  1682. memop:=unscaledop;
  1683. needsimplify:=true;
  1684. end
  1685. else if (unscaledop<>A_NONE) and
  1686. (simple_ref_type(unscaledop,opsize,postfix,startref)=sr_simple) and
  1687. (simple_ref_type(unscaledop,opsize,postfix,endref)=sr_simple) then
  1688. begin
  1689. memop:=unscaledop;
  1690. needsimplify:=false;
  1691. end
  1692. else
  1693. begin
  1694. memop:=scaledop;
  1695. needsimplify:=true;
  1696. end;
  1697. end;
  1698. { adjust the offset and/or addressing mode after a load/store so it's
  1699. correct for the next one of the same size }
  1700. procedure updaterefafterloadstore(var ref: treference; oplen: longint);
  1701. begin
  1702. case ref.addressmode of
  1703. AM_OFFSET:
  1704. inc(ref.offset,oplen);
  1705. AM_POSTINDEXED:
  1706. { base register updated by instruction, next offset can remain
  1707. the same }
  1708. ;
  1709. AM_PREINDEXED:
  1710. begin
  1711. { base register updated by instruction -> next instruction can
  1712. use post-indexing with offset = sizeof(operation) }
  1713. ref.offset:=0;
  1714. ref.addressmode:=AM_OFFSET;
  1715. end;
  1716. end;
  1717. end;
  1718. { generate a load/store and adjust the reference offset to the next
  1719. memory location if necessary }
  1720. procedure genloadstore(list: TAsmList; op: tasmop; reg: tregister; var ref: treference; postfix: toppostfix; opsize: tcgsize);
  1721. begin
  1722. list.concat(setoppostfix(taicpu.op_reg_ref(op,reg,ref),postfix));
  1723. updaterefafterloadstore(ref,tcgsize2size[opsize]);
  1724. end;
  1725. { generate a dual load/store (ldp/stp) and adjust the reference offset to
  1726. the next memory location if necessary }
  1727. procedure gendualloadstore(list: TAsmList; op: tasmop; reg1, reg2: tregister; var ref: treference; postfix: toppostfix; opsize: tcgsize);
  1728. begin
  1729. list.concat(setoppostfix(taicpu.op_reg_reg_ref(op,reg1,reg2,ref),postfix));
  1730. updaterefafterloadstore(ref,tcgsize2size[opsize]*2);
  1731. end;
  1732. { turn a reference into a pre- or post-indexed reference for use in a
  1733. load/store of a particular size }
  1734. procedure makesimpleforcopy(list: TAsmList; var scaledop: tasmop; opsize: tcgsize; postfix: toppostfix; forcepostindexing: boolean; var ref: treference; var basereplaced: boolean);
  1735. var
  1736. tmpreg: tregister;
  1737. scaledoffset: longint;
  1738. orgaddressmode: taddressmode;
  1739. begin
  1740. scaledoffset:=tcgsize2size[opsize];
  1741. if scaledop in [A_LDP,A_STP] then
  1742. scaledoffset:=scaledoffset*2;
  1743. { can we use the reference as post-indexed without changes? }
  1744. if forcepostindexing then
  1745. begin
  1746. orgaddressmode:=ref.addressmode;
  1747. ref.addressmode:=AM_POSTINDEXED;
  1748. if (orgaddressmode=AM_POSTINDEXED) or
  1749. ((ref.offset=0) and
  1750. (simple_ref_type(scaledop,opsize,postfix,ref)=sr_simple)) then
  1751. begin
  1752. { just change the post-indexed offset to the access size }
  1753. ref.offset:=scaledoffset;
  1754. { and replace the base register if that didn't happen yet
  1755. (could be sp or a regvar) }
  1756. if not basereplaced then
  1757. begin
  1758. tmpreg:=getaddressregister(list);
  1759. a_load_reg_reg(list,OS_ADDR,OS_ADDR,ref.base,tmpreg);
  1760. ref.base:=tmpreg;
  1761. basereplaced:=true;
  1762. end;
  1763. exit;
  1764. end;
  1765. ref.addressmode:=orgaddressmode;
  1766. end;
  1767. {$ifdef dummy}
  1768. This could in theory be useful in case you have a concatcopy from
  1769. e.g. x1+255 to x1+267 *and* the reference is aligned, but this seems
  1770. very unlikely. Disabled because it still needs fixes, as it
  1771. also generates pre-indexed loads right now at the very end for the
  1772. left-over gencopies
  1773. { can we turn it into a pre-indexed reference for free? (after the
  1774. first operation, it will be turned into an offset one) }
  1775. if not forcepostindexing and
  1776. (ref.offset<>0) then
  1777. begin
  1778. orgaddressmode:=ref.addressmode;
  1779. ref.addressmode:=AM_PREINDEXED;
  1780. tmpreg:=ref.base;
  1781. if not basereplaced and
  1782. (ref.base=tmpreg) then
  1783. begin
  1784. tmpreg:=getaddressregister(list);
  1785. a_load_reg_reg(list,OS_ADDR,OS_ADDR,ref.base,tmpreg);
  1786. ref.base:=tmpreg;
  1787. basereplaced:=true;
  1788. end;
  1789. if simple_ref_type(scaledop,opsize,postfix,ref)<>sr_simple then
  1790. make_simple_ref(list,scaledop,opsize,postfix,ref,NR_NO);
  1791. exit;
  1792. end;
  1793. {$endif dummy}
  1794. if not forcepostindexing then
  1795. begin
  1796. ref.addressmode:=AM_OFFSET;
  1797. make_simple_ref(list,scaledop,opsize,postfix,ref,NR_NO);
  1798. { this may still cause problems if the final offset is no longer
  1799. a simple ref; it's a bit complicated to pass all information
  1800. through at all places and check that here, so play safe: we
  1801. currently never generate unrolled copies for more than 64
  1802. bytes (32 with non-double-register copies) }
  1803. if ref.index=NR_NO then
  1804. begin
  1805. if ((scaledop in [A_LDP,A_STP]) and
  1806. (ref.offset<((64-8)*tcgsize2size[opsize]))) or
  1807. ((scaledop in [A_LDUR,A_STUR]) and
  1808. (ref.offset<(255-8*tcgsize2size[opsize]))) or
  1809. ((scaledop in [A_LDR,A_STR]) and
  1810. (ref.offset<((4096-8)*tcgsize2size[opsize]))) then
  1811. exit;
  1812. end;
  1813. end;
  1814. tmpreg:=getaddressregister(list);
  1815. a_loadaddr_ref_reg(list,ref,tmpreg);
  1816. basereplaced:=true;
  1817. if forcepostindexing then
  1818. begin
  1819. reference_reset_base(ref,tmpreg,scaledoffset,ref.temppos,ref.alignment,ref.volatility);
  1820. ref.addressmode:=AM_POSTINDEXED;
  1821. end
  1822. else
  1823. begin
  1824. reference_reset_base(ref,tmpreg,0,ref.temppos,ref.alignment,ref.volatility);
  1825. ref.addressmode:=AM_OFFSET;
  1826. end
  1827. end;
  1828. { prepare a reference for use by gencopy. This is done both after the
  1829. unrolled and regular copy loop -> get rid of post-indexing mode, make
  1830. sure ref is valid }
  1831. procedure preparecopy(list: tasmlist; scaledop, unscaledop: tasmop; var ref: treference; opsize: tcgsize; postfix: toppostfix; out op: tasmop; var basereplaced: boolean);
  1832. var
  1833. simplify: boolean;
  1834. begin
  1835. if ref.addressmode=AM_POSTINDEXED then
  1836. ref.offset:=tcgsize2size[opsize];
  1837. getmemop(scaledop,scaledop,ref,ref,opsize,postfix,op,simplify);
  1838. if simplify then
  1839. begin
  1840. makesimpleforcopy(list,scaledop,opsize,postfix,false,ref,basereplaced);
  1841. op:=scaledop;
  1842. end;
  1843. end;
  1844. { generate a copy from source to dest of size opsize/postfix }
  1845. procedure gencopy(list: TAsmList; var source, dest: treference; postfix: toppostfix; opsize: tcgsize);
  1846. var
  1847. reg: tregister;
  1848. loadop, storeop: tasmop;
  1849. begin
  1850. preparecopy(list,A_LDR,A_LDUR,source,opsize,postfix,loadop,sourcebasereplaced);
  1851. preparecopy(list,A_STR,A_STUR,dest,opsize,postfix,storeop,destbasereplaced);
  1852. reg:=getintregister(list,opsize);
  1853. genloadstore(list,loadop,reg,source,postfix,opsize);
  1854. genloadstore(list,storeop,reg,dest,postfix,opsize);
  1855. end;
  1856. { copy the leftovers after an unrolled or regular copy loop }
  1857. procedure gencopyleftovers(list: TAsmList; var source, dest: treference; len: longint);
  1858. begin
  1859. { stop post-indexing if we did so in the loop, since in that case all
  1860. offsets definitely can be represented now }
  1861. if source.addressmode=AM_POSTINDEXED then
  1862. begin
  1863. source.addressmode:=AM_OFFSET;
  1864. source.offset:=0;
  1865. end;
  1866. if dest.addressmode=AM_POSTINDEXED then
  1867. begin
  1868. dest.addressmode:=AM_OFFSET;
  1869. dest.offset:=0;
  1870. end;
  1871. { transfer the leftovers }
  1872. if len>=8 then
  1873. begin
  1874. dec(len,8);
  1875. gencopy(list,source,dest,PF_NONE,OS_64);
  1876. end;
  1877. if len>=4 then
  1878. begin
  1879. dec(len,4);
  1880. gencopy(list,source,dest,PF_NONE,OS_32);
  1881. end;
  1882. if len>=2 then
  1883. begin
  1884. dec(len,2);
  1885. gencopy(list,source,dest,PF_H,OS_16);
  1886. end;
  1887. if len>=1 then
  1888. begin
  1889. dec(len);
  1890. gencopy(list,source,dest,PF_B,OS_8);
  1891. end;
  1892. end;
  1893. const
  1894. { load_length + loop dec + cbnz }
  1895. loopoverhead=12;
  1896. { loop overhead + load + store }
  1897. totallooplen=loopoverhead + 8;
  1898. var
  1899. totalalign: longint;
  1900. maxlenunrolled: tcgint;
  1901. loadop, storeop: tasmop;
  1902. opsize: tcgsize;
  1903. postfix: toppostfix;
  1904. tmpsource, tmpdest: treference;
  1905. scaledstoreop, unscaledstoreop,
  1906. scaledloadop, unscaledloadop: tasmop;
  1907. regs: array[1..8] of tregister;
  1908. countreg: tregister;
  1909. i, regcount: longint;
  1910. hl: tasmlabel;
  1911. simplifysource, simplifydest: boolean;
  1912. begin
  1913. if len=0 then
  1914. exit;
  1915. sourcebasereplaced:=false;
  1916. destbasereplaced:=false;
  1917. { maximum common alignment }
  1918. totalalign:=max(1,newalignment(source.alignment,dest.alignment));
  1919. { use a simple load/store? }
  1920. if (len in [1,2,4,8]) and
  1921. ((totalalign>=(len div 2)) or
  1922. (source.alignment=len) or
  1923. (dest.alignment=len)) then
  1924. begin
  1925. opsize:=int_cgsize(len);
  1926. a_load_ref_ref(list,opsize,opsize,source,dest);
  1927. exit;
  1928. end;
  1929. { alignment > length is not useful, and would break some checks below }
  1930. while totalalign>len do
  1931. totalalign:=totalalign div 2;
  1932. { operation sizes to use based on common alignment }
  1933. case totalalign of
  1934. 1:
  1935. begin
  1936. postfix:=PF_B;
  1937. opsize:=OS_8;
  1938. end;
  1939. 2:
  1940. begin
  1941. postfix:=PF_H;
  1942. opsize:=OS_16;
  1943. end;
  1944. 4:
  1945. begin
  1946. postfix:=PF_None;
  1947. opsize:=OS_32;
  1948. end
  1949. else
  1950. begin
  1951. totalalign:=8;
  1952. postfix:=PF_None;
  1953. opsize:=OS_64;
  1954. end;
  1955. end;
  1956. { maximum length to handled with an unrolled loop (4 loads + 4 stores) }
  1957. maxlenunrolled:=min(totalalign,8)*4;
  1958. { ldp/stp -> 2 registers per instruction }
  1959. if (totalalign>=4) and
  1960. (len>=totalalign*2) then
  1961. begin
  1962. maxlenunrolled:=maxlenunrolled*2;
  1963. scaledstoreop:=A_STP;
  1964. scaledloadop:=A_LDP;
  1965. unscaledstoreop:=A_NONE;
  1966. unscaledloadop:=A_NONE;
  1967. end
  1968. else
  1969. begin
  1970. scaledstoreop:=A_STR;
  1971. scaledloadop:=A_LDR;
  1972. unscaledstoreop:=A_STUR;
  1973. unscaledloadop:=A_LDUR;
  1974. end;
  1975. { we only need 4 instructions extra to call FPC_MOVE }
  1976. if cs_opt_size in current_settings.optimizerswitches then
  1977. maxlenunrolled:=maxlenunrolled div 2;
  1978. if (len>maxlenunrolled) and
  1979. (len>totalalign*8) then
  1980. begin
  1981. g_concatcopy_move(list,source,dest,len);
  1982. exit;
  1983. end;
  1984. simplifysource:=true;
  1985. simplifydest:=true;
  1986. tmpsource:=source;
  1987. tmpdest:=dest;
  1988. { can we directly encode all offsets in an unrolled loop? }
  1989. if len<=maxlenunrolled then
  1990. begin
  1991. {$ifdef extdebug}
  1992. list.concat(tai_comment.Create(strpnew('concatcopy unrolled loop; len/opsize/align: '+tostr(len)+'/'+tostr(tcgsize2size[opsize])+'/'+tostr(totalalign))));
  1993. {$endif extdebug}
  1994. { the leftovers will be handled separately -> -(len mod opsize) }
  1995. inc(tmpsource.offset,len-(len mod tcgsize2size[opsize]));
  1996. { additionally, the last regular load/store will be at
  1997. offset+len-opsize (if len-(len mod opsize)>len) }
  1998. if tmpsource.offset>source.offset then
  1999. dec(tmpsource.offset,tcgsize2size[opsize]);
  2000. getmemop(scaledloadop,unscaledloadop,source,tmpsource,opsize,postfix,loadop,simplifysource);
  2001. inc(tmpdest.offset,len-(len mod tcgsize2size[opsize]));
  2002. if tmpdest.offset>dest.offset then
  2003. dec(tmpdest.offset,tcgsize2size[opsize]);
  2004. getmemop(scaledstoreop,unscaledstoreop,dest,tmpdest,opsize,postfix,storeop,simplifydest);
  2005. tmpsource:=source;
  2006. tmpdest:=dest;
  2007. { if we can't directly encode all offsets, simplify }
  2008. if simplifysource then
  2009. begin
  2010. loadop:=scaledloadop;
  2011. makesimpleforcopy(list,loadop,opsize,postfix,false,tmpsource,sourcebasereplaced);
  2012. end;
  2013. if simplifydest then
  2014. begin
  2015. storeop:=scaledstoreop;
  2016. makesimpleforcopy(list,storeop,opsize,postfix,false,tmpdest,destbasereplaced);
  2017. end;
  2018. regcount:=len div tcgsize2size[opsize];
  2019. { in case we transfer two registers at a time, we copy an even
  2020. number of registers }
  2021. if loadop=A_LDP then
  2022. regcount:=regcount and not(1);
  2023. { initialise for dfa }
  2024. regs[low(regs)]:=NR_NO;
  2025. { max 4 loads/stores -> max 8 registers (in case of ldp/stdp) }
  2026. for i:=1 to regcount do
  2027. regs[i]:=getintregister(list,opsize);
  2028. if loadop=A_LDP then
  2029. begin
  2030. { load registers }
  2031. for i:=1 to (regcount div 2) do
  2032. gendualloadstore(list,loadop,regs[i*2-1],regs[i*2],tmpsource,postfix,opsize);
  2033. { store registers }
  2034. for i:=1 to (regcount div 2) do
  2035. gendualloadstore(list,storeop,regs[i*2-1],regs[i*2],tmpdest,postfix,opsize);
  2036. end
  2037. else
  2038. begin
  2039. for i:=1 to regcount do
  2040. genloadstore(list,loadop,regs[i],tmpsource,postfix,opsize);
  2041. for i:=1 to regcount do
  2042. genloadstore(list,storeop,regs[i],tmpdest,postfix,opsize);
  2043. end;
  2044. { leftover }
  2045. len:=len-regcount*tcgsize2size[opsize];
  2046. {$ifdef extdebug}
  2047. list.concat(tai_comment.Create(strpnew('concatcopy unrolled loop leftover: '+tostr(len))));
  2048. {$endif extdebug}
  2049. end
  2050. else
  2051. begin
  2052. {$ifdef extdebug}
  2053. list.concat(tai_comment.Create(strpnew('concatcopy regular loop; len/align: '+tostr(len)+'/'+tostr(totalalign))));
  2054. {$endif extdebug}
  2055. { regular loop -> definitely use post-indexing }
  2056. loadop:=scaledloadop;
  2057. makesimpleforcopy(list,loadop,opsize,postfix,true,tmpsource,sourcebasereplaced);
  2058. storeop:=scaledstoreop;
  2059. makesimpleforcopy(list,storeop,opsize,postfix,true,tmpdest,destbasereplaced);
  2060. current_asmdata.getjumplabel(hl);
  2061. countreg:=getintregister(list,OS_32);
  2062. if loadop=A_LDP then
  2063. a_load_const_reg(list,OS_32,len div tcgsize2size[opsize]*2,countreg)
  2064. else
  2065. a_load_const_reg(list,OS_32,len div tcgsize2size[opsize],countreg);
  2066. a_label(list,hl);
  2067. a_op_const_reg(list,OP_SUB,OS_32,1,countreg);
  2068. if loadop=A_LDP then
  2069. begin
  2070. regs[1]:=getintregister(list,opsize);
  2071. regs[2]:=getintregister(list,opsize);
  2072. gendualloadstore(list,loadop,regs[1],regs[2],tmpsource,postfix,opsize);
  2073. gendualloadstore(list,storeop,regs[1],regs[2],tmpdest,postfix,opsize);
  2074. end
  2075. else
  2076. begin
  2077. regs[1]:=getintregister(list,opsize);
  2078. genloadstore(list,loadop,regs[1],tmpsource,postfix,opsize);
  2079. genloadstore(list,storeop,regs[1],tmpdest,postfix,opsize);
  2080. end;
  2081. list.concat(taicpu.op_reg_sym_ofs(A_CBNZ,countreg,hl,0));
  2082. len:=len mod tcgsize2size[opsize];
  2083. end;
  2084. gencopyleftovers(list,tmpsource,tmpdest,len);
  2085. end;
  2086. procedure tcgaarch64.g_adjust_self_value(list:TAsmList;procdef: tprocdef;ioffset: tcgint);
  2087. begin
  2088. { This method is integrated into g_intf_wrapper and shouldn't be called separately }
  2089. InternalError(2013020102);
  2090. end;
  2091. procedure create_codegen;
  2092. begin
  2093. cg:=tcgaarch64.Create;
  2094. cg128:=tcg128.Create;
  2095. end;
  2096. end.