123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305 |
- /* crypto/rsa/rsa_pk1.c */
- /* Copyright (C) 1995-1998 Eric Young ([email protected])
- * All rights reserved.
- *
- * This package is an SSL implementation written
- * by Eric Young ([email protected]).
- * The implementation was written so as to conform with Netscapes SSL.
- *
- * This library is free for commercial and non-commercial use as long as
- * the following conditions are aheared to. The following conditions
- * apply to all code found in this distribution, be it the RC4, RSA,
- * lhash, DES, etc., code; not just the SSL code. The SSL documentation
- * included with this distribution is covered by the same copyright terms
- * except that the holder is Tim Hudson ([email protected]).
- *
- * Copyright remains Eric Young's, and as such any Copyright notices in
- * the code are not to be removed.
- * If this package is used in a product, Eric Young should be given attribution
- * as the author of the parts of the library used.
- * This can be in the form of a textual message at program startup or
- * in documentation (online or textual) provided with the package.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- * must display the following acknowledgement:
- * "This product includes cryptographic software written by
- * Eric Young ([email protected])"
- * The word 'cryptographic' can be left out if the rouines from the library
- * being used are not cryptographic related :-).
- * 4. If you include any Windows specific code (or a derivative thereof) from
- * the apps directory (application code) you must include an acknowledgement:
- * "This product includes software written by Tim Hudson ([email protected])"
- *
- * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * The licence and distribution terms for any publically available version or
- * derivative of this code cannot be changed. i.e. this code cannot simply be
- * copied and put under another distribution licence
- * [including the GNU Public Licence.]
- */
- #include "constant_time_locl.h"
- #include <stdio.h>
- #include "cryptlib.h"
- #include <openssl/bn.h>
- #include <openssl/rsa.h>
- #include <openssl/rand.h>
- int RSA_padding_add_PKCS1_type_1(unsigned char *to, int tlen,
- const unsigned char *from, int flen)
- {
- int j;
- unsigned char *p;
- if (flen > (tlen - RSA_PKCS1_PADDING_SIZE)) {
- RSAerr(RSA_F_RSA_PADDING_ADD_PKCS1_TYPE_1,
- RSA_R_DATA_TOO_LARGE_FOR_KEY_SIZE);
- return (0);
- }
- p = (unsigned char *)to;
- *(p++) = 0;
- *(p++) = 1; /* Private Key BT (Block Type) */
- /* pad out with 0xff data */
- j = tlen - 3 - flen;
- memset(p, 0xff, j);
- p += j;
- *(p++) = '\0';
- memcpy(p, from, (unsigned int)flen);
- return (1);
- }
- int RSA_padding_check_PKCS1_type_1(unsigned char *to, int tlen,
- const unsigned char *from, int flen,
- int num)
- {
- int i, j;
- const unsigned char *p;
- p = from;
- /*
- * The format is
- * 00 || 01 || PS || 00 || D
- * PS - padding string, at least 8 bytes of FF
- * D - data.
- */
- if (num < 11)
- return -1;
- /* Accept inputs with and without the leading 0-byte. */
- if (num == flen) {
- if ((*p++) != 0x00) {
- RSAerr(RSA_F_RSA_PADDING_CHECK_PKCS1_TYPE_1,
- RSA_R_INVALID_PADDING);
- return -1;
- }
- flen--;
- }
- if ((num != (flen + 1)) || (*(p++) != 01)) {
- RSAerr(RSA_F_RSA_PADDING_CHECK_PKCS1_TYPE_1,
- RSA_R_BLOCK_TYPE_IS_NOT_01);
- return (-1);
- }
- /* scan over padding data */
- j = flen - 1; /* one for type. */
- for (i = 0; i < j; i++) {
- if (*p != 0xff) { /* should decrypt to 0xff */
- if (*p == 0) {
- p++;
- break;
- } else {
- RSAerr(RSA_F_RSA_PADDING_CHECK_PKCS1_TYPE_1,
- RSA_R_BAD_FIXED_HEADER_DECRYPT);
- return (-1);
- }
- }
- p++;
- }
- if (i == j) {
- RSAerr(RSA_F_RSA_PADDING_CHECK_PKCS1_TYPE_1,
- RSA_R_NULL_BEFORE_BLOCK_MISSING);
- return (-1);
- }
- if (i < 8) {
- RSAerr(RSA_F_RSA_PADDING_CHECK_PKCS1_TYPE_1,
- RSA_R_BAD_PAD_BYTE_COUNT);
- return (-1);
- }
- i++; /* Skip over the '\0' */
- j -= i;
- if (j > tlen) {
- RSAerr(RSA_F_RSA_PADDING_CHECK_PKCS1_TYPE_1, RSA_R_DATA_TOO_LARGE);
- return (-1);
- }
- memcpy(to, p, (unsigned int)j);
- return (j);
- }
- int RSA_padding_add_PKCS1_type_2(unsigned char *to, int tlen,
- const unsigned char *from, int flen)
- {
- int i, j;
- unsigned char *p;
- if (flen > (tlen - 11)) {
- RSAerr(RSA_F_RSA_PADDING_ADD_PKCS1_TYPE_2,
- RSA_R_DATA_TOO_LARGE_FOR_KEY_SIZE);
- return (0);
- }
- p = (unsigned char *)to;
- *(p++) = 0;
- *(p++) = 2; /* Public Key BT (Block Type) */
- /* pad out with non-zero random data */
- j = tlen - 3 - flen;
- if (RAND_bytes(p, j) <= 0)
- return (0);
- for (i = 0; i < j; i++) {
- if (*p == '\0')
- do {
- if (RAND_bytes(p, 1) <= 0)
- return (0);
- } while (*p == '\0');
- p++;
- }
- *(p++) = '\0';
- memcpy(p, from, (unsigned int)flen);
- return (1);
- }
- int RSA_padding_check_PKCS1_type_2(unsigned char *to, int tlen,
- const unsigned char *from, int flen,
- int num)
- {
- int i;
- /* |em| is the encoded message, zero-padded to exactly |num| bytes */
- unsigned char *em = NULL;
- unsigned int good, found_zero_byte, mask;
- int zero_index = 0, msg_index, mlen = -1;
- if (tlen < 0 || flen < 0)
- return -1;
- /*
- * PKCS#1 v1.5 decryption. See "PKCS #1 v2.2: RSA Cryptography Standard",
- * section 7.2.2.
- */
- if (flen > num || num < 11) {
- RSAerr(RSA_F_RSA_PADDING_CHECK_PKCS1_TYPE_2,
- RSA_R_PKCS_DECODING_ERROR);
- return -1;
- }
- em = OPENSSL_malloc(num);
- if (em == NULL) {
- RSAerr(RSA_F_RSA_PADDING_CHECK_PKCS1_TYPE_2, ERR_R_MALLOC_FAILURE);
- return -1;
- }
- /*
- * Caller is encouraged to pass zero-padded message created with
- * BN_bn2binpad. Trouble is that since we can't read out of |from|'s
- * bounds, it's impossible to have an invariant memory access pattern
- * in case |from| was not zero-padded in advance.
- */
- for (from += flen, em += num, i = 0; i < num; i++) {
- mask = ~constant_time_is_zero(flen);
- flen -= 1 & mask;
- from -= 1 & mask;
- *--em = *from & mask;
- }
- good = constant_time_is_zero(em[0]);
- good &= constant_time_eq(em[1], 2);
- /* scan over padding data */
- found_zero_byte = 0;
- for (i = 2; i < num; i++) {
- unsigned int equals0 = constant_time_is_zero(em[i]);
- zero_index = constant_time_select_int(~found_zero_byte & equals0,
- i, zero_index);
- found_zero_byte |= equals0;
- }
- /*
- * PS must be at least 8 bytes long, and it starts two bytes into |em|.
- * If we never found a 0-byte, then |zero_index| is 0 and the check
- * also fails.
- */
- good &= constant_time_ge(zero_index, 2 + 8);
- /*
- * Skip the zero byte. This is incorrect if we never found a zero-byte
- * but in this case we also do not copy the message out.
- */
- msg_index = zero_index + 1;
- mlen = num - msg_index;
- /*
- * For good measure, do this check in constant time as well.
- */
- good &= constant_time_ge(tlen, mlen);
- /*
- * Move the result in-place by |num|-11-|mlen| bytes to the left.
- * Then if |good| move |mlen| bytes from |em|+11 to |to|.
- * Otherwise leave |to| unchanged.
- * Copy the memory back in a way that does not reveal the size of
- * the data being copied via a timing side channel. This requires copying
- * parts of the buffer multiple times based on the bits set in the real
- * length. Clear bits do a non-copy with identical access pattern.
- * The loop below has overall complexity of O(N*log(N)).
- */
- tlen = constant_time_select_int(constant_time_lt(num - 11, tlen),
- num - 11, tlen);
- for (msg_index = 1; msg_index < num - 11; msg_index <<= 1) {
- mask = ~constant_time_eq(msg_index & (num - 11 - mlen), 0);
- for (i = 11; i < num - msg_index; i++)
- em[i] = constant_time_select_8(mask, em[i + msg_index], em[i]);
- }
- for (i = 0; i < tlen; i++) {
- mask = good & constant_time_lt(i, mlen);
- to[i] = constant_time_select_8(mask, em[i + 11], to[i]);
- }
- OPENSSL_cleanse(em, num);
- OPENSSL_free(em);
- RSAerr(RSA_F_RSA_PADDING_CHECK_PKCS1_TYPE_2, RSA_R_PKCS_DECODING_ERROR);
- err_clear_last_constant_time(1 & good);
- return constant_time_select_int(good, mlen, -1);
- }
|