.. |
aoptcpu.pas
|
2fa066b003
* optimize vmovaps/vmovapd after avx instructions
|
преди 11 години |
aoptcpub.pas
|
2f5ce095ce
* RefsHaveIndexReg -> cpurefshaveindexreg
|
преди 13 години |
aoptcpud.pas
|
790a4fe2d3
* log and id tags removed
|
преди 20 години |
cgcpu.pas
|
d8c0f11ff9
+ cs_userbp optimizer switch, so on x86-64 the compiler can make use of rbp if it is not needed as frame pointer
|
преди 11 години |
cpubase.inc
|
bfbb0c5b9d
* optimize mov/lea
|
преди 12 години |
cpuelf.pas
|
11b72b5515
x86_64 internal ELF linker:
|
преди 12 години |
cpuinfo.pas
|
d88d644925
+ support for FMA intrinsic: if there is no hardware support, the compiler throws an error.
|
преди 11 години |
cpunode.pas
|
b57c95043f
+ support overriding tdef/tsym methods with target-specific functionality:
|
преди 11 години |
cpupara.pas
|
8c693a3300
* Win64 apparently expects records with single field of floating-point type to be passed the same way as that only field, i.e. in xmm register. Fixes tests/cg/tcalext6.pp.
|
преди 11 години |
cpupi.pas
|
70dda94474
* x86_64-win64: don't allocate outgoing parameter area in nostackframe procedures, it fails compilation if range/overflow/etc checking is enabled (which always sets pi_do_call) due to check introduced in r22677.
|
преди 12 години |
cputarg.pas
|
3327d508ee
Enable nasm assembler for x86_64 cpu
|
преди 11 години |
hlcgcpu.pas
|
71deda6f50
+ added interface to ncgutil.gen_load_loc_cgpara() to hlcgobj + generic
|
преди 14 години |
nx64add.pas
|
2459518bdd
* use IMUL even for unsigned multiplication on x86_64, when overflow checking is
|
преди 11 години |
nx64cal.pas
|
b837694207
* factored out releasing an unused return value into
|
преди 14 години |
nx64cnv.pas
|
edd42aa42a
* moved subsetref/reg and bit_set/test support from cgobj to hlcgobj for
|
преди 13 години |
nx64flw.pas
|
3fb304cbe2
- Removed Win64 SEH code specific to results of managed types returned in registers. Since r26228 managed types are always returned in parameters.
|
преди 11 години |
nx64inl.pas
|
790a4fe2d3
* log and id tags removed
|
преди 20 години |
nx64mat.pas
|
b594eee70b
* Moved x86_64 mod/div code to x86, with minimal changes to ensure it compiles on i386/i8086. Merging optimized division-by-const code from i386 is pending...
|
преди 11 години |
nx64set.pas
|
859676d7d3
* fixed r26519 for darwin/x86-64, see comments (mantis #25644)
|
преди 11 години |
r8664ari.inc
|
5af873ee5b
* x86 targets: Profiling shows that quite a bit of time is spent in findreg_by_number(), despite it uses binary search. Worse, it is repeated for every piece of register information. Trying to get rid of some of these calls: rearranged registers so that their "opcode" matches 3 LSBs of superregister number (with a few exceptions described at the beginning of x86reg.dat). This allows to lookup opcodes in regval() with O(1) complexity, and removes need in rXXXop.inc files.
|
преди 12 години |
r8664att.inc
|
5af873ee5b
* x86 targets: Profiling shows that quite a bit of time is spent in findreg_by_number(), despite it uses binary search. Worse, it is repeated for every piece of register information. Trying to get rid of some of these calls: rearranged registers so that their "opcode" matches 3 LSBs of superregister number (with a few exceptions described at the beginning of x86reg.dat). This allows to lookup opcodes in regval() with O(1) complexity, and removes need in rXXXop.inc files.
|
преди 12 години |
r8664con.inc
|
5af873ee5b
* x86 targets: Profiling shows that quite a bit of time is spent in findreg_by_number(), despite it uses binary search. Worse, it is repeated for every piece of register information. Trying to get rid of some of these calls: rearranged registers so that their "opcode" matches 3 LSBs of superregister number (with a few exceptions described at the beginning of x86reg.dat). This allows to lookup opcodes in regval() with O(1) complexity, and removes need in rXXXop.inc files.
|
преди 12 години |
r8664dwrf.inc
|
5af873ee5b
* x86 targets: Profiling shows that quite a bit of time is spent in findreg_by_number(), despite it uses binary search. Worse, it is repeated for every piece of register information. Trying to get rid of some of these calls: rearranged registers so that their "opcode" matches 3 LSBs of superregister number (with a few exceptions described at the beginning of x86reg.dat). This allows to lookup opcodes in regval() with O(1) complexity, and removes need in rXXXop.inc files.
|
преди 12 години |
r8664int.inc
|
5af873ee5b
* x86 targets: Profiling shows that quite a bit of time is spent in findreg_by_number(), despite it uses binary search. Worse, it is repeated for every piece of register information. Trying to get rid of some of these calls: rearranged registers so that their "opcode" matches 3 LSBs of superregister number (with a few exceptions described at the beginning of x86reg.dat). This allows to lookup opcodes in regval() with O(1) complexity, and removes need in rXXXop.inc files.
|
преди 12 години |
r8664iri.inc
|
5af873ee5b
* x86 targets: Profiling shows that quite a bit of time is spent in findreg_by_number(), despite it uses binary search. Worse, it is repeated for every piece of register information. Trying to get rid of some of these calls: rearranged registers so that their "opcode" matches 3 LSBs of superregister number (with a few exceptions described at the beginning of x86reg.dat). This allows to lookup opcodes in regval() with O(1) complexity, and removes need in rXXXop.inc files.
|
преди 12 години |
r8664nasm.inc
|
2ec5a649d7
* set Ch_* for more operations
|
преди 11 години |
r8664nor.inc
|
283ff05127
* merged avx support in inline assembler developed by Torsten Grundke
|
преди 13 години |
r8664num.inc
|
5af873ee5b
* x86 targets: Profiling shows that quite a bit of time is spent in findreg_by_number(), despite it uses binary search. Worse, it is repeated for every piece of register information. Trying to get rid of some of these calls: rearranged registers so that their "opcode" matches 3 LSBs of superregister number (with a few exceptions described at the beginning of x86reg.dat). This allows to lookup opcodes in regval() with O(1) complexity, and removes need in rXXXop.inc files.
|
преди 12 години |
r8664ot.inc
|
5af873ee5b
* x86 targets: Profiling shows that quite a bit of time is spent in findreg_by_number(), despite it uses binary search. Worse, it is repeated for every piece of register information. Trying to get rid of some of these calls: rearranged registers so that their "opcode" matches 3 LSBs of superregister number (with a few exceptions described at the beginning of x86reg.dat). This allows to lookup opcodes in regval() with O(1) complexity, and removes need in rXXXop.inc files.
|
преди 12 години |
r8664rni.inc
|
5af873ee5b
* x86 targets: Profiling shows that quite a bit of time is spent in findreg_by_number(), despite it uses binary search. Worse, it is repeated for every piece of register information. Trying to get rid of some of these calls: rearranged registers so that their "opcode" matches 3 LSBs of superregister number (with a few exceptions described at the beginning of x86reg.dat). This allows to lookup opcodes in regval() with O(1) complexity, and removes need in rXXXop.inc files.
|
преди 12 години |
r8664sri.inc
|
5af873ee5b
* x86 targets: Profiling shows that quite a bit of time is spent in findreg_by_number(), despite it uses binary search. Worse, it is repeated for every piece of register information. Trying to get rid of some of these calls: rearranged registers so that their "opcode" matches 3 LSBs of superregister number (with a few exceptions described at the beginning of x86reg.dat). This allows to lookup opcodes in regval() with O(1) complexity, and removes need in rXXXop.inc files.
|
преди 12 години |
r8664stab.inc
|
5af873ee5b
* x86 targets: Profiling shows that quite a bit of time is spent in findreg_by_number(), despite it uses binary search. Worse, it is repeated for every piece of register information. Trying to get rid of some of these calls: rearranged registers so that their "opcode" matches 3 LSBs of superregister number (with a few exceptions described at the beginning of x86reg.dat). This allows to lookup opcodes in regval() with O(1) complexity, and removes need in rXXXop.inc files.
|
преди 12 години |
r8664std.inc
|
5af873ee5b
* x86 targets: Profiling shows that quite a bit of time is spent in findreg_by_number(), despite it uses binary search. Worse, it is repeated for every piece of register information. Trying to get rid of some of these calls: rearranged registers so that their "opcode" matches 3 LSBs of superregister number (with a few exceptions described at the beginning of x86reg.dat). This allows to lookup opcodes in regval() with O(1) complexity, and removes need in rXXXop.inc files.
|
преди 12 години |
rax64att.pas
|
0db44ae108
+ Support SEH directives in x86_64 AT&T asmreader.
|
преди 14 години |
rax64int.pas
|
f726e1691b
* Fixed warnings and notes.
|
преди 16 години |
rgcpu.pas
|
a3f58e84be
* rbp can be used for normal purpose under certain conditions so it shouldn't interfere with all other registers
|
преди 11 години |
symcpu.pas
|
94bcb9878a
* reimplemented r28329 in a different way, as suggested by Jonas
|
преди 11 години |
win64unw.pas
|
6a3fe72de9
+ Support .rva directive in AT&T reader. Put it into base class because it generally applies to all targets with COFF output, but enabled for Windows targets only (others need additional testing).
|
преди 14 години |
x8664ats.inc
|
dc628b8969
* x86: Completely skip instructions that do not exist for target CPU bit width. The existing behavior of writing mnemonics and properties but no encoding allows an invalid instruction to be recognized by assembler reader or even generated by compiler, but it but won't assemble anyway.
|
преди 11 години |
x8664att.inc
|
dc628b8969
* x86: Completely skip instructions that do not exist for target CPU bit width. The existing behavior of writing mnemonics and properties but no encoding allows an invalid instruction to be recognized by assembler reader or even generated by compiler, but it but won't assemble anyway.
|
преди 11 години |
x8664int.inc
|
dc628b8969
* x86: Completely skip instructions that do not exist for target CPU bit width. The existing behavior of writing mnemonics and properties but no encoding allows an invalid instruction to be recognized by assembler reader or even generated by compiler, but it but won't assemble anyway.
|
преди 11 години |
x8664nop.inc
|
842e027a9f
+ prove of concept how FMA4 could be supported in inline assembler
|
преди 11 години |
x8664op.inc
|
dc628b8969
* x86: Completely skip instructions that do not exist for target CPU bit width. The existing behavior of writing mnemonics and properties but no encoding allows an invalid instruction to be recognized by assembler reader or even generated by compiler, but it but won't assemble anyway.
|
преди 11 години |
x8664pro.inc
|
dc628b8969
* x86: Completely skip instructions that do not exist for target CPU bit width. The existing behavior of writing mnemonics and properties but no encoding allows an invalid instruction to be recognized by assembler reader or even generated by compiler, but it but won't assemble anyway.
|
преди 11 години |
x8664tab.inc
|
842e027a9f
+ prove of concept how FMA4 could be supported in inline assembler
|
преди 11 години |